mirror of
https://github.com/torvalds/linux.git
synced 2024-12-26 12:52:30 +00:00
39 lines
1.2 KiB
Plaintext
39 lines
1.2 KiB
Plaintext
|
* Synopsys ARC EMAC 10/100 Ethernet driver (EMAC)
|
||
|
|
|
||
|
|
Required properties:
|
||
|
|
- compatible: Should be "snps,arc-emac"
|
||
|
|
- reg: Address and length of the register set for the device
|
||
|
|
- interrupts: Should contain the EMAC interrupts
|
||
|
|
- clock-frequency: CPU frequency. It is needed to calculate and set polling
|
||
|
|
period of EMAC.
|
||
|
|
- max-speed: Maximum supported data-rate in Mbit/s. In some HW configurations
|
||
|
|
bandwidth of external memory controller might be a limiting factor. That's why
|
||
|
|
it's required to specify which data-rate is supported on current SoC or FPGA.
|
||
|
|
For example if only 10 Mbit/s is supported (10BASE-T) set "10". If 100 Mbit/s is
|
||
|
|
supported (100BASE-TX) set "100".
|
||
|
|
- phy: PHY device attached to the EMAC via MDIO bus
|
||
|
|
|
||
|
|
Child nodes of the driver are the individual PHY devices connected to the
|
||
|
|
MDIO bus. They must have a "reg" property given the PHY address on the MDIO bus.
|
||
|
|
|
||
|
|
Optional properties:
|
||
|
|
- mac-address: 6 bytes, mac address
|
||
|
|
|
||
|
|
Examples:
|
||
|
|
|
||
|
|
ethernet@c0fc2000 {
|
||
|
|
compatible = "snps,arc-emac";
|
||
|
|
reg = <0xc0fc2000 0x3c>;
|
||
|
|
interrupts = <6>;
|
||
|
|
mac-address = [ 00 11 22 33 44 55 ];
|
||
|
|
clock-frequency = <80000000>;
|
||
|
|
max-speed = <100>;
|
||
|
|
phy = <&phy0>;
|
||
|
|
|
||
|
|
#address-cells = <1>;
|
||
|
|
#size-cells = <0>;
|
||
|
|
phy0: ethernet-phy@0 {
|
||
|
|
reg = <1>;
|
||
|
|
};
|
||
|
|
};
|