linux/drivers/hv/channel_mgmt.c

1486 lines
40 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright (c) 2009, Microsoft Corporation.
*
* Authors:
* Haiyang Zhang <haiyangz@microsoft.com>
* Hank Janssen <hjanssen@microsoft.com>
*/
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include <linux/kernel.h>
#include <linux/interrupt.h>
#include <linux/sched.h>
#include <linux/wait.h>
#include <linux/mm.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 08:04:11 +00:00
#include <linux/slab.h>
#include <linux/list.h>
#include <linux/module.h>
#include <linux/completion.h>
#include <linux/delay.h>
#include <linux/cpu.h>
#include <linux/hyperv.h>
#include <asm/mshyperv.h>
#include "hyperv_vmbus.h"
static void init_vp_index(struct vmbus_channel *channel, u16 dev_type);
static const struct vmbus_device vmbus_devs[] = {
/* IDE */
{ .dev_type = HV_IDE,
HV_IDE_GUID,
.perf_device = true,
},
/* SCSI */
{ .dev_type = HV_SCSI,
HV_SCSI_GUID,
.perf_device = true,
},
/* Fibre Channel */
{ .dev_type = HV_FC,
HV_SYNTHFC_GUID,
.perf_device = true,
},
/* Synthetic NIC */
{ .dev_type = HV_NIC,
HV_NIC_GUID,
.perf_device = true,
},
/* Network Direct */
{ .dev_type = HV_ND,
HV_ND_GUID,
.perf_device = true,
},
/* PCIE */
{ .dev_type = HV_PCIE,
HV_PCIE_GUID,
.perf_device = false,
},
/* Synthetic Frame Buffer */
{ .dev_type = HV_FB,
HV_SYNTHVID_GUID,
.perf_device = false,
},
/* Synthetic Keyboard */
{ .dev_type = HV_KBD,
HV_KBD_GUID,
.perf_device = false,
},
/* Synthetic MOUSE */
{ .dev_type = HV_MOUSE,
HV_MOUSE_GUID,
.perf_device = false,
},
/* KVP */
{ .dev_type = HV_KVP,
HV_KVP_GUID,
.perf_device = false,
},
/* Time Synch */
{ .dev_type = HV_TS,
HV_TS_GUID,
.perf_device = false,
},
/* Heartbeat */
{ .dev_type = HV_HB,
HV_HEART_BEAT_GUID,
.perf_device = false,
},
/* Shutdown */
{ .dev_type = HV_SHUTDOWN,
HV_SHUTDOWN_GUID,
.perf_device = false,
},
/* File copy */
{ .dev_type = HV_FCOPY,
HV_FCOPY_GUID,
.perf_device = false,
},
/* Backup */
{ .dev_type = HV_BACKUP,
HV_VSS_GUID,
.perf_device = false,
},
/* Dynamic Memory */
{ .dev_type = HV_DM,
HV_DM_GUID,
.perf_device = false,
},
/* Unknown GUID */
{ .dev_type = HV_UNKNOWN,
.perf_device = false,
},
};
static const struct {
guid_t guid;
} vmbus_unsupported_devs[] = {
{ HV_AVMA1_GUID },
{ HV_AVMA2_GUID },
{ HV_RDV_GUID },
};
/*
* The rescinded channel may be blocked waiting for a response from the host;
* take care of that.
*/
static void vmbus_rescind_cleanup(struct vmbus_channel *channel)
{
struct vmbus_channel_msginfo *msginfo;
unsigned long flags;
spin_lock_irqsave(&vmbus_connection.channelmsg_lock, flags);
channel->rescind = true;
list_for_each_entry(msginfo, &vmbus_connection.chn_msg_list,
msglistentry) {
if (msginfo->waiting_channel == channel) {
complete(&msginfo->waitevent);
break;
}
}
spin_unlock_irqrestore(&vmbus_connection.channelmsg_lock, flags);
}
static bool is_unsupported_vmbus_devs(const guid_t *guid)
{
int i;
for (i = 0; i < ARRAY_SIZE(vmbus_unsupported_devs); i++)
if (guid_equal(guid, &vmbus_unsupported_devs[i].guid))
return true;
return false;
}
static u16 hv_get_dev_type(const struct vmbus_channel *channel)
{
const guid_t *guid = &channel->offermsg.offer.if_type;
u16 i;
if (is_hvsock_channel(channel) || is_unsupported_vmbus_devs(guid))
return HV_UNKNOWN;
for (i = HV_IDE; i < HV_UNKNOWN; i++) {
if (guid_equal(guid, &vmbus_devs[i].guid))
return i;
}
pr_info("Unknown GUID: %pUl\n", guid);
return i;
}
/**
* vmbus_prep_negotiate_resp() - Create default response for Negotiate message
* @icmsghdrp: Pointer to msg header structure
* @buf: Raw buffer channel data
* @fw_version: The framework versions we can support.
* @fw_vercnt: The size of @fw_version.
* @srv_version: The service versions we can support.
* @srv_vercnt: The size of @srv_version.
* @nego_fw_version: The selected framework version.
* @nego_srv_version: The selected service version.
*
* Note: Versions are given in decreasing order.
*
* Set up and fill in default negotiate response message.
* Mainly used by Hyper-V drivers.
*/
bool vmbus_prep_negotiate_resp(struct icmsg_hdr *icmsghdrp,
u8 *buf, const int *fw_version, int fw_vercnt,
const int *srv_version, int srv_vercnt,
int *nego_fw_version, int *nego_srv_version)
{
int icframe_major, icframe_minor;
int icmsg_major, icmsg_minor;
int fw_major, fw_minor;
int srv_major, srv_minor;
int i, j;
bool found_match = false;
struct icmsg_negotiate *negop;
icmsghdrp->icmsgsize = 0x10;
negop = (struct icmsg_negotiate *)&buf[
sizeof(struct vmbuspipe_hdr) +
sizeof(struct icmsg_hdr)];
icframe_major = negop->icframe_vercnt;
icframe_minor = 0;
icmsg_major = negop->icmsg_vercnt;
icmsg_minor = 0;
/*
* Select the framework version number we will
* support.
*/
for (i = 0; i < fw_vercnt; i++) {
fw_major = (fw_version[i] >> 16);
fw_minor = (fw_version[i] & 0xFFFF);
for (j = 0; j < negop->icframe_vercnt; j++) {
if ((negop->icversion_data[j].major == fw_major) &&
(negop->icversion_data[j].minor == fw_minor)) {
icframe_major = negop->icversion_data[j].major;
icframe_minor = negop->icversion_data[j].minor;
found_match = true;
break;
}
}
if (found_match)
break;
}
if (!found_match)
goto fw_error;
found_match = false;
for (i = 0; i < srv_vercnt; i++) {
srv_major = (srv_version[i] >> 16);
srv_minor = (srv_version[i] & 0xFFFF);
for (j = negop->icframe_vercnt;
(j < negop->icframe_vercnt + negop->icmsg_vercnt);
j++) {
if ((negop->icversion_data[j].major == srv_major) &&
(negop->icversion_data[j].minor == srv_minor)) {
icmsg_major = negop->icversion_data[j].major;
icmsg_minor = negop->icversion_data[j].minor;
found_match = true;
break;
}
}
if (found_match)
break;
}
/*
* Respond with the framework and service
* version numbers we can support.
*/
fw_error:
if (!found_match) {
negop->icframe_vercnt = 0;
negop->icmsg_vercnt = 0;
} else {
negop->icframe_vercnt = 1;
negop->icmsg_vercnt = 1;
}
if (nego_fw_version)
*nego_fw_version = (icframe_major << 16) | icframe_minor;
if (nego_srv_version)
*nego_srv_version = (icmsg_major << 16) | icmsg_minor;
negop->icversion_data[0].major = icframe_major;
negop->icversion_data[0].minor = icframe_minor;
negop->icversion_data[1].major = icmsg_major;
negop->icversion_data[1].minor = icmsg_minor;
return found_match;
}
EXPORT_SYMBOL_GPL(vmbus_prep_negotiate_resp);
/*
* alloc_channel - Allocate and initialize a vmbus channel object
*/
static struct vmbus_channel *alloc_channel(void)
{
struct vmbus_channel *channel;
channel = kzalloc(sizeof(*channel), GFP_ATOMIC);
if (!channel)
return NULL;
spin_lock_init(&channel->sched_lock);
spin_lock_init(&channel->lock);
init_completion(&channel->rescind_event);
INIT_LIST_HEAD(&channel->sc_list);
tasklet_init(&channel->callback_event,
vmbus_on_event, (unsigned long)channel);
hv_ringbuffer_pre_init(channel);
return channel;
}
/*
* free_channel - Release the resources used by the vmbus channel object
*/
static void free_channel(struct vmbus_channel *channel)
{
tasklet_kill(&channel->callback_event);
Drivers: hv: vmbus: Expose monitor data only when monitor pages are used There are two methods for signaling the host: the monitor page mechanism and hypercalls. The monitor page mechanism is used by performance critical channels (storage, networking, etc.) because it provides improved throughput. However, latency is increased. Monitor pages are allocated to these channels. Monitor pages are not allocated to channels that do not use the monitor page mechanism. Therefore, these channels do not have a valid monitor id or valid monitor page data. In these cases, some of the "_show" functions return incorrect data. They return an invalid monitor id and data that is beyond the bounds of the hv_monitor_page array fields. The "channel->offermsg.monitor_allocated" value can be used to determine whether monitor pages have been allocated to a channel. Add "is_visible()" callback functions for the device-level and channel-level attribute groups. These functions will hide the monitor sysfs files when the monitor mechanism is not used. Remove ".default_attributes" from "vmbus_chan_attrs" and create a channel-level attribute group. These changes allow the new "is_visible()" callback function to be applied to the channel-level attributes. Call "sysfs_create_group()" in "vmbus_add_channel_kobj()" to create the channel's sysfs files. Add a new function, “vmbus_remove_channel_attr_group()”, and call it in "free_channel()" to remove the channel's sysfs files when the channel is closed. Signed-off-by: Kimberly Brown <kimbrownkd@gmail.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Michael Kelley <mikelley@microsoft.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-03-19 04:04:01 +00:00
vmbus_remove_channel_attr_group(channel);
kobject_put(&channel->kobj);
}
Drivers: hv: vmbus: Replace the per-CPU channel lists with a global array of channels When Hyper-V sends an interrupt to the guest, the guest has to figure out which channel the interrupt is associated with. Hyper-V sets a bit in a memory page that is shared with the guest, indicating a particular "relid" that the interrupt is associated with. The current Linux code then uses a set of per-CPU linked lists to map a given "relid" to a pointer to a channel structure. This design introduces a synchronization problem if the CPU that Hyper-V will interrupt for a certain channel is changed. If the interrupt comes on the "old CPU" and the channel was already moved to the per-CPU list of the "new CPU", then the relid -> channel mapping will fail and the interrupt is dropped. Similarly, if the interrupt comes on the new CPU but the channel was not moved to the per-CPU list of the new CPU, then the mapping will fail and the interrupt is dropped. Relids are integers ranging from 0 to 2047. The mapping from relids to channel structures can be done by setting up an array with 2048 entries, each entry being a pointer to a channel structure (hence total size ~16K bytes, which is not a problem). The array is global, so there are no per-CPU linked lists to update. The array can be searched and updated by loading from/storing to the array at the specified index. With no per-CPU data structures, the above mentioned synchronization problem is avoided and the relid2channel() function gets simpler. Suggested-by: Michael Kelley <mikelley@microsoft.com> Signed-off-by: Andrea Parri (Microsoft) <parri.andrea@gmail.com> Link: https://lore.kernel.org/r/20200406001514.19876-4-parri.andrea@gmail.com Reviewed-by: Michael Kelley <mikelley@microsoft.com> Signed-off-by: Wei Liu <wei.liu@kernel.org>
2020-04-06 00:15:06 +00:00
void vmbus_channel_map_relid(struct vmbus_channel *channel)
{
Drivers: hv: vmbus: Replace the per-CPU channel lists with a global array of channels When Hyper-V sends an interrupt to the guest, the guest has to figure out which channel the interrupt is associated with. Hyper-V sets a bit in a memory page that is shared with the guest, indicating a particular "relid" that the interrupt is associated with. The current Linux code then uses a set of per-CPU linked lists to map a given "relid" to a pointer to a channel structure. This design introduces a synchronization problem if the CPU that Hyper-V will interrupt for a certain channel is changed. If the interrupt comes on the "old CPU" and the channel was already moved to the per-CPU list of the "new CPU", then the relid -> channel mapping will fail and the interrupt is dropped. Similarly, if the interrupt comes on the new CPU but the channel was not moved to the per-CPU list of the new CPU, then the mapping will fail and the interrupt is dropped. Relids are integers ranging from 0 to 2047. The mapping from relids to channel structures can be done by setting up an array with 2048 entries, each entry being a pointer to a channel structure (hence total size ~16K bytes, which is not a problem). The array is global, so there are no per-CPU linked lists to update. The array can be searched and updated by loading from/storing to the array at the specified index. With no per-CPU data structures, the above mentioned synchronization problem is avoided and the relid2channel() function gets simpler. Suggested-by: Michael Kelley <mikelley@microsoft.com> Signed-off-by: Andrea Parri (Microsoft) <parri.andrea@gmail.com> Link: https://lore.kernel.org/r/20200406001514.19876-4-parri.andrea@gmail.com Reviewed-by: Michael Kelley <mikelley@microsoft.com> Signed-off-by: Wei Liu <wei.liu@kernel.org>
2020-04-06 00:15:06 +00:00
if (WARN_ON(channel->offermsg.child_relid >= MAX_CHANNEL_RELIDS))
return;
/*
* The mapping of the channel's relid is visible from the CPUs that
* execute vmbus_chan_sched() by the time that vmbus_chan_sched() will
* execute:
*
* (a) In the "normal (i.e., not resuming from hibernation)" path,
* the full barrier in smp_store_mb() guarantees that the store
* is propagated to all CPUs before the add_channel_work work
* is queued. In turn, add_channel_work is queued before the
* channel's ring buffer is allocated/initialized and the
* OPENCHANNEL message for the channel is sent in vmbus_open().
* Hyper-V won't start sending the interrupts for the channel
* before the OPENCHANNEL message is acked. The memory barrier
* in vmbus_chan_sched() -> sync_test_and_clear_bit() ensures
* that vmbus_chan_sched() must find the channel's relid in
* recv_int_page before retrieving the channel pointer from the
* array of channels.
*
* (b) In the "resuming from hibernation" path, the smp_store_mb()
* guarantees that the store is propagated to all CPUs before
* the VMBus connection is marked as ready for the resume event
* (cf. check_ready_for_resume_event()). The interrupt handler
* of the VMBus driver and vmbus_chan_sched() can not run before
* vmbus_bus_resume() has completed execution (cf. resume_noirq).
*/
smp_store_mb(
vmbus_connection.channels[channel->offermsg.child_relid],
channel);
}
Drivers: hv: vmbus: Replace the per-CPU channel lists with a global array of channels When Hyper-V sends an interrupt to the guest, the guest has to figure out which channel the interrupt is associated with. Hyper-V sets a bit in a memory page that is shared with the guest, indicating a particular "relid" that the interrupt is associated with. The current Linux code then uses a set of per-CPU linked lists to map a given "relid" to a pointer to a channel structure. This design introduces a synchronization problem if the CPU that Hyper-V will interrupt for a certain channel is changed. If the interrupt comes on the "old CPU" and the channel was already moved to the per-CPU list of the "new CPU", then the relid -> channel mapping will fail and the interrupt is dropped. Similarly, if the interrupt comes on the new CPU but the channel was not moved to the per-CPU list of the new CPU, then the mapping will fail and the interrupt is dropped. Relids are integers ranging from 0 to 2047. The mapping from relids to channel structures can be done by setting up an array with 2048 entries, each entry being a pointer to a channel structure (hence total size ~16K bytes, which is not a problem). The array is global, so there are no per-CPU linked lists to update. The array can be searched and updated by loading from/storing to the array at the specified index. With no per-CPU data structures, the above mentioned synchronization problem is avoided and the relid2channel() function gets simpler. Suggested-by: Michael Kelley <mikelley@microsoft.com> Signed-off-by: Andrea Parri (Microsoft) <parri.andrea@gmail.com> Link: https://lore.kernel.org/r/20200406001514.19876-4-parri.andrea@gmail.com Reviewed-by: Michael Kelley <mikelley@microsoft.com> Signed-off-by: Wei Liu <wei.liu@kernel.org>
2020-04-06 00:15:06 +00:00
void vmbus_channel_unmap_relid(struct vmbus_channel *channel)
{
Drivers: hv: vmbus: Replace the per-CPU channel lists with a global array of channels When Hyper-V sends an interrupt to the guest, the guest has to figure out which channel the interrupt is associated with. Hyper-V sets a bit in a memory page that is shared with the guest, indicating a particular "relid" that the interrupt is associated with. The current Linux code then uses a set of per-CPU linked lists to map a given "relid" to a pointer to a channel structure. This design introduces a synchronization problem if the CPU that Hyper-V will interrupt for a certain channel is changed. If the interrupt comes on the "old CPU" and the channel was already moved to the per-CPU list of the "new CPU", then the relid -> channel mapping will fail and the interrupt is dropped. Similarly, if the interrupt comes on the new CPU but the channel was not moved to the per-CPU list of the new CPU, then the mapping will fail and the interrupt is dropped. Relids are integers ranging from 0 to 2047. The mapping from relids to channel structures can be done by setting up an array with 2048 entries, each entry being a pointer to a channel structure (hence total size ~16K bytes, which is not a problem). The array is global, so there are no per-CPU linked lists to update. The array can be searched and updated by loading from/storing to the array at the specified index. With no per-CPU data structures, the above mentioned synchronization problem is avoided and the relid2channel() function gets simpler. Suggested-by: Michael Kelley <mikelley@microsoft.com> Signed-off-by: Andrea Parri (Microsoft) <parri.andrea@gmail.com> Link: https://lore.kernel.org/r/20200406001514.19876-4-parri.andrea@gmail.com Reviewed-by: Michael Kelley <mikelley@microsoft.com> Signed-off-by: Wei Liu <wei.liu@kernel.org>
2020-04-06 00:15:06 +00:00
if (WARN_ON(channel->offermsg.child_relid >= MAX_CHANNEL_RELIDS))
return;
WRITE_ONCE(
vmbus_connection.channels[channel->offermsg.child_relid],
NULL);
}
static void vmbus_release_relid(u32 relid)
{
struct vmbus_channel_relid_released msg;
int ret;
memset(&msg, 0, sizeof(struct vmbus_channel_relid_released));
msg.child_relid = relid;
msg.header.msgtype = CHANNELMSG_RELID_RELEASED;
ret = vmbus_post_msg(&msg, sizeof(struct vmbus_channel_relid_released),
true);
trace_vmbus_release_relid(&msg, ret);
}
void hv_process_channel_removal(struct vmbus_channel *channel)
{
unsigned long flags;
Drivers: hv: vmbus: Replace the per-CPU channel lists with a global array of channels When Hyper-V sends an interrupt to the guest, the guest has to figure out which channel the interrupt is associated with. Hyper-V sets a bit in a memory page that is shared with the guest, indicating a particular "relid" that the interrupt is associated with. The current Linux code then uses a set of per-CPU linked lists to map a given "relid" to a pointer to a channel structure. This design introduces a synchronization problem if the CPU that Hyper-V will interrupt for a certain channel is changed. If the interrupt comes on the "old CPU" and the channel was already moved to the per-CPU list of the "new CPU", then the relid -> channel mapping will fail and the interrupt is dropped. Similarly, if the interrupt comes on the new CPU but the channel was not moved to the per-CPU list of the new CPU, then the mapping will fail and the interrupt is dropped. Relids are integers ranging from 0 to 2047. The mapping from relids to channel structures can be done by setting up an array with 2048 entries, each entry being a pointer to a channel structure (hence total size ~16K bytes, which is not a problem). The array is global, so there are no per-CPU linked lists to update. The array can be searched and updated by loading from/storing to the array at the specified index. With no per-CPU data structures, the above mentioned synchronization problem is avoided and the relid2channel() function gets simpler. Suggested-by: Michael Kelley <mikelley@microsoft.com> Signed-off-by: Andrea Parri (Microsoft) <parri.andrea@gmail.com> Link: https://lore.kernel.org/r/20200406001514.19876-4-parri.andrea@gmail.com Reviewed-by: Michael Kelley <mikelley@microsoft.com> Signed-off-by: Wei Liu <wei.liu@kernel.org>
2020-04-06 00:15:06 +00:00
lockdep_assert_held(&vmbus_connection.channel_mutex);
BUG_ON(!channel->rescind);
Drivers: hv: vmbus: Replace the per-CPU channel lists with a global array of channels When Hyper-V sends an interrupt to the guest, the guest has to figure out which channel the interrupt is associated with. Hyper-V sets a bit in a memory page that is shared with the guest, indicating a particular "relid" that the interrupt is associated with. The current Linux code then uses a set of per-CPU linked lists to map a given "relid" to a pointer to a channel structure. This design introduces a synchronization problem if the CPU that Hyper-V will interrupt for a certain channel is changed. If the interrupt comes on the "old CPU" and the channel was already moved to the per-CPU list of the "new CPU", then the relid -> channel mapping will fail and the interrupt is dropped. Similarly, if the interrupt comes on the new CPU but the channel was not moved to the per-CPU list of the new CPU, then the mapping will fail and the interrupt is dropped. Relids are integers ranging from 0 to 2047. The mapping from relids to channel structures can be done by setting up an array with 2048 entries, each entry being a pointer to a channel structure (hence total size ~16K bytes, which is not a problem). The array is global, so there are no per-CPU linked lists to update. The array can be searched and updated by loading from/storing to the array at the specified index. With no per-CPU data structures, the above mentioned synchronization problem is avoided and the relid2channel() function gets simpler. Suggested-by: Michael Kelley <mikelley@microsoft.com> Signed-off-by: Andrea Parri (Microsoft) <parri.andrea@gmail.com> Link: https://lore.kernel.org/r/20200406001514.19876-4-parri.andrea@gmail.com Reviewed-by: Michael Kelley <mikelley@microsoft.com> Signed-off-by: Wei Liu <wei.liu@kernel.org>
2020-04-06 00:15:06 +00:00
/*
* hv_process_channel_removal() could find INVALID_RELID only for
* hv_sock channels. See the inline comments in vmbus_onoffer().
*/
WARN_ON(channel->offermsg.child_relid == INVALID_RELID &&
!is_hvsock_channel(channel));
/*
* Upon suspend, an in-use hv_sock channel is removed from the array of
* channels and the relid is invalidated. After hibernation, when the
* user-space appplication destroys the channel, it's unnecessary and
* unsafe to remove the channel from the array of channels. See also
* the inline comments before the call of vmbus_release_relid() below.
*/
if (channel->offermsg.child_relid != INVALID_RELID)
vmbus_channel_unmap_relid(channel);
if (channel->primary_channel == NULL) {
list_del(&channel->listentry);
} else {
struct vmbus_channel *primary_channel = channel->primary_channel;
spin_lock_irqsave(&primary_channel->lock, flags);
list_del(&channel->sc_list);
spin_unlock_irqrestore(&primary_channel->lock, flags);
}
/*
* Upon suspend, an in-use hv_sock channel is marked as "rescinded" and
* the relid is invalidated; after hibernation, when the user-space app
* destroys the channel, the relid is INVALID_RELID, and in this case
* it's unnecessary and unsafe to release the old relid, since the same
* relid can refer to a completely different channel now.
*/
if (channel->offermsg.child_relid != INVALID_RELID)
vmbus_release_relid(channel->offermsg.child_relid);
free_channel(channel);
}
void vmbus_free_channels(void)
{
struct vmbus_channel *channel, *tmp;
list_for_each_entry_safe(channel, tmp, &vmbus_connection.chn_list,
listentry) {
/* hv_process_channel_removal() needs this */
channel->rescind = true;
vmbus_device_unregister(channel->device_obj);
}
}
Drivers: hv: vmbus: Offload the handling of channels to two workqueues vmbus_process_offer() mustn't call channel->sc_creation_callback() directly for sub-channels, because sc_creation_callback() -> vmbus_open() may never get the host's response to the OPEN_CHANNEL message (the host may rescind a channel at any time, e.g. in the case of hot removing a NIC), and vmbus_onoffer_rescind() may not wake up the vmbus_open() as it's blocked due to a non-zero vmbus_connection.offer_in_progress, and finally we have a deadlock. The above is also true for primary channels, if the related device drivers use sync probing mode by default. And, usually the handling of primary channels and sub-channels can depend on each other, so we should offload them to different workqueues to avoid possible deadlock, e.g. in sync-probing mode, NIC1's netvsc_subchan_work() can race with NIC2's netvsc_probe() -> rtnl_lock(), and causes deadlock: the former gets the rtnl_lock and waits for all the sub-channels to appear, but the latter can't get the rtnl_lock and this blocks the handling of sub-channels. The patch can fix the multiple-NIC deadlock described above for v3.x kernels (e.g. RHEL 7.x) which don't support async-probing of devices, and v4.4, v4.9, v4.14 and v4.18 which support async-probing but don't enable async-probing for Hyper-V drivers (yet). The patch can also fix the hang issue in sub-channel's handling described above for all versions of kernels, including v4.19 and v4.20-rc4. So actually the patch should be applied to all the existing kernels, not only the kernels that have 8195b1396ec8. Fixes: 8195b1396ec8 ("hv_netvsc: fix deadlock on hotplug") Cc: stable@vger.kernel.org Cc: Stephen Hemminger <sthemmin@microsoft.com> Cc: K. Y. Srinivasan <kys@microsoft.com> Cc: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: Dexuan Cui <decui@microsoft.com> Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-12-03 00:54:35 +00:00
/* Note: the function can run concurrently for primary/sub channels. */
static void vmbus_add_channel_work(struct work_struct *work)
{
Drivers: hv: vmbus: Offload the handling of channels to two workqueues vmbus_process_offer() mustn't call channel->sc_creation_callback() directly for sub-channels, because sc_creation_callback() -> vmbus_open() may never get the host's response to the OPEN_CHANNEL message (the host may rescind a channel at any time, e.g. in the case of hot removing a NIC), and vmbus_onoffer_rescind() may not wake up the vmbus_open() as it's blocked due to a non-zero vmbus_connection.offer_in_progress, and finally we have a deadlock. The above is also true for primary channels, if the related device drivers use sync probing mode by default. And, usually the handling of primary channels and sub-channels can depend on each other, so we should offload them to different workqueues to avoid possible deadlock, e.g. in sync-probing mode, NIC1's netvsc_subchan_work() can race with NIC2's netvsc_probe() -> rtnl_lock(), and causes deadlock: the former gets the rtnl_lock and waits for all the sub-channels to appear, but the latter can't get the rtnl_lock and this blocks the handling of sub-channels. The patch can fix the multiple-NIC deadlock described above for v3.x kernels (e.g. RHEL 7.x) which don't support async-probing of devices, and v4.4, v4.9, v4.14 and v4.18 which support async-probing but don't enable async-probing for Hyper-V drivers (yet). The patch can also fix the hang issue in sub-channel's handling described above for all versions of kernels, including v4.19 and v4.20-rc4. So actually the patch should be applied to all the existing kernels, not only the kernels that have 8195b1396ec8. Fixes: 8195b1396ec8 ("hv_netvsc: fix deadlock on hotplug") Cc: stable@vger.kernel.org Cc: Stephen Hemminger <sthemmin@microsoft.com> Cc: K. Y. Srinivasan <kys@microsoft.com> Cc: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: Dexuan Cui <decui@microsoft.com> Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-12-03 00:54:35 +00:00
struct vmbus_channel *newchannel =
container_of(work, struct vmbus_channel, add_channel_work);
struct vmbus_channel *primary_channel = newchannel->primary_channel;
unsigned long flags;
int ret;
/*
* This state is used to indicate a successful open
* so that when we do close the channel normally, we
Drivers: hv: vmbus: Offload the handling of channels to two workqueues vmbus_process_offer() mustn't call channel->sc_creation_callback() directly for sub-channels, because sc_creation_callback() -> vmbus_open() may never get the host's response to the OPEN_CHANNEL message (the host may rescind a channel at any time, e.g. in the case of hot removing a NIC), and vmbus_onoffer_rescind() may not wake up the vmbus_open() as it's blocked due to a non-zero vmbus_connection.offer_in_progress, and finally we have a deadlock. The above is also true for primary channels, if the related device drivers use sync probing mode by default. And, usually the handling of primary channels and sub-channels can depend on each other, so we should offload them to different workqueues to avoid possible deadlock, e.g. in sync-probing mode, NIC1's netvsc_subchan_work() can race with NIC2's netvsc_probe() -> rtnl_lock(), and causes deadlock: the former gets the rtnl_lock and waits for all the sub-channels to appear, but the latter can't get the rtnl_lock and this blocks the handling of sub-channels. The patch can fix the multiple-NIC deadlock described above for v3.x kernels (e.g. RHEL 7.x) which don't support async-probing of devices, and v4.4, v4.9, v4.14 and v4.18 which support async-probing but don't enable async-probing for Hyper-V drivers (yet). The patch can also fix the hang issue in sub-channel's handling described above for all versions of kernels, including v4.19 and v4.20-rc4. So actually the patch should be applied to all the existing kernels, not only the kernels that have 8195b1396ec8. Fixes: 8195b1396ec8 ("hv_netvsc: fix deadlock on hotplug") Cc: stable@vger.kernel.org Cc: Stephen Hemminger <sthemmin@microsoft.com> Cc: K. Y. Srinivasan <kys@microsoft.com> Cc: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: Dexuan Cui <decui@microsoft.com> Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-12-03 00:54:35 +00:00
* can cleanup properly.
*/
newchannel->state = CHANNEL_OPEN_STATE;
Drivers: hv: vmbus: Offload the handling of channels to two workqueues vmbus_process_offer() mustn't call channel->sc_creation_callback() directly for sub-channels, because sc_creation_callback() -> vmbus_open() may never get the host's response to the OPEN_CHANNEL message (the host may rescind a channel at any time, e.g. in the case of hot removing a NIC), and vmbus_onoffer_rescind() may not wake up the vmbus_open() as it's blocked due to a non-zero vmbus_connection.offer_in_progress, and finally we have a deadlock. The above is also true for primary channels, if the related device drivers use sync probing mode by default. And, usually the handling of primary channels and sub-channels can depend on each other, so we should offload them to different workqueues to avoid possible deadlock, e.g. in sync-probing mode, NIC1's netvsc_subchan_work() can race with NIC2's netvsc_probe() -> rtnl_lock(), and causes deadlock: the former gets the rtnl_lock and waits for all the sub-channels to appear, but the latter can't get the rtnl_lock and this blocks the handling of sub-channels. The patch can fix the multiple-NIC deadlock described above for v3.x kernels (e.g. RHEL 7.x) which don't support async-probing of devices, and v4.4, v4.9, v4.14 and v4.18 which support async-probing but don't enable async-probing for Hyper-V drivers (yet). The patch can also fix the hang issue in sub-channel's handling described above for all versions of kernels, including v4.19 and v4.20-rc4. So actually the patch should be applied to all the existing kernels, not only the kernels that have 8195b1396ec8. Fixes: 8195b1396ec8 ("hv_netvsc: fix deadlock on hotplug") Cc: stable@vger.kernel.org Cc: Stephen Hemminger <sthemmin@microsoft.com> Cc: K. Y. Srinivasan <kys@microsoft.com> Cc: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: Dexuan Cui <decui@microsoft.com> Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-12-03 00:54:35 +00:00
if (primary_channel != NULL) {
/* newchannel is a sub-channel. */
struct hv_device *dev = primary_channel->device_obj;
if (vmbus_add_channel_kobj(dev, newchannel))
Drivers: hv: vmbus: Offload the handling of channels to two workqueues vmbus_process_offer() mustn't call channel->sc_creation_callback() directly for sub-channels, because sc_creation_callback() -> vmbus_open() may never get the host's response to the OPEN_CHANNEL message (the host may rescind a channel at any time, e.g. in the case of hot removing a NIC), and vmbus_onoffer_rescind() may not wake up the vmbus_open() as it's blocked due to a non-zero vmbus_connection.offer_in_progress, and finally we have a deadlock. The above is also true for primary channels, if the related device drivers use sync probing mode by default. And, usually the handling of primary channels and sub-channels can depend on each other, so we should offload them to different workqueues to avoid possible deadlock, e.g. in sync-probing mode, NIC1's netvsc_subchan_work() can race with NIC2's netvsc_probe() -> rtnl_lock(), and causes deadlock: the former gets the rtnl_lock and waits for all the sub-channels to appear, but the latter can't get the rtnl_lock and this blocks the handling of sub-channels. The patch can fix the multiple-NIC deadlock described above for v3.x kernels (e.g. RHEL 7.x) which don't support async-probing of devices, and v4.4, v4.9, v4.14 and v4.18 which support async-probing but don't enable async-probing for Hyper-V drivers (yet). The patch can also fix the hang issue in sub-channel's handling described above for all versions of kernels, including v4.19 and v4.20-rc4. So actually the patch should be applied to all the existing kernels, not only the kernels that have 8195b1396ec8. Fixes: 8195b1396ec8 ("hv_netvsc: fix deadlock on hotplug") Cc: stable@vger.kernel.org Cc: Stephen Hemminger <sthemmin@microsoft.com> Cc: K. Y. Srinivasan <kys@microsoft.com> Cc: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: Dexuan Cui <decui@microsoft.com> Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-12-03 00:54:35 +00:00
goto err_deq_chan;
if (primary_channel->sc_creation_callback != NULL)
primary_channel->sc_creation_callback(newchannel);
newchannel->probe_done = true;
return;
}
/*
Drivers: hv: vmbus: Offload the handling of channels to two workqueues vmbus_process_offer() mustn't call channel->sc_creation_callback() directly for sub-channels, because sc_creation_callback() -> vmbus_open() may never get the host's response to the OPEN_CHANNEL message (the host may rescind a channel at any time, e.g. in the case of hot removing a NIC), and vmbus_onoffer_rescind() may not wake up the vmbus_open() as it's blocked due to a non-zero vmbus_connection.offer_in_progress, and finally we have a deadlock. The above is also true for primary channels, if the related device drivers use sync probing mode by default. And, usually the handling of primary channels and sub-channels can depend on each other, so we should offload them to different workqueues to avoid possible deadlock, e.g. in sync-probing mode, NIC1's netvsc_subchan_work() can race with NIC2's netvsc_probe() -> rtnl_lock(), and causes deadlock: the former gets the rtnl_lock and waits for all the sub-channels to appear, but the latter can't get the rtnl_lock and this blocks the handling of sub-channels. The patch can fix the multiple-NIC deadlock described above for v3.x kernels (e.g. RHEL 7.x) which don't support async-probing of devices, and v4.4, v4.9, v4.14 and v4.18 which support async-probing but don't enable async-probing for Hyper-V drivers (yet). The patch can also fix the hang issue in sub-channel's handling described above for all versions of kernels, including v4.19 and v4.20-rc4. So actually the patch should be applied to all the existing kernels, not only the kernels that have 8195b1396ec8. Fixes: 8195b1396ec8 ("hv_netvsc: fix deadlock on hotplug") Cc: stable@vger.kernel.org Cc: Stephen Hemminger <sthemmin@microsoft.com> Cc: K. Y. Srinivasan <kys@microsoft.com> Cc: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: Dexuan Cui <decui@microsoft.com> Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-12-03 00:54:35 +00:00
* Start the process of binding the primary channel to the driver
*/
newchannel->device_obj = vmbus_device_create(
&newchannel->offermsg.offer.if_type,
&newchannel->offermsg.offer.if_instance,
newchannel);
if (!newchannel->device_obj)
goto err_deq_chan;
newchannel->device_obj->device_id = hv_get_dev_type(newchannel);
/*
* Add the new device to the bus. This will kick off device-driver
* binding which eventually invokes the device driver's AddDevice()
* method.
*/
ret = vmbus_device_register(newchannel->device_obj);
if (ret != 0) {
pr_err("unable to add child device object (relid %d)\n",
newchannel->offermsg.child_relid);
kfree(newchannel->device_obj);
goto err_deq_chan;
}
newchannel->probe_done = true;
return;
err_deq_chan:
mutex_lock(&vmbus_connection.channel_mutex);
Drivers: hv: vmbus: Offload the handling of channels to two workqueues vmbus_process_offer() mustn't call channel->sc_creation_callback() directly for sub-channels, because sc_creation_callback() -> vmbus_open() may never get the host's response to the OPEN_CHANNEL message (the host may rescind a channel at any time, e.g. in the case of hot removing a NIC), and vmbus_onoffer_rescind() may not wake up the vmbus_open() as it's blocked due to a non-zero vmbus_connection.offer_in_progress, and finally we have a deadlock. The above is also true for primary channels, if the related device drivers use sync probing mode by default. And, usually the handling of primary channels and sub-channels can depend on each other, so we should offload them to different workqueues to avoid possible deadlock, e.g. in sync-probing mode, NIC1's netvsc_subchan_work() can race with NIC2's netvsc_probe() -> rtnl_lock(), and causes deadlock: the former gets the rtnl_lock and waits for all the sub-channels to appear, but the latter can't get the rtnl_lock and this blocks the handling of sub-channels. The patch can fix the multiple-NIC deadlock described above for v3.x kernels (e.g. RHEL 7.x) which don't support async-probing of devices, and v4.4, v4.9, v4.14 and v4.18 which support async-probing but don't enable async-probing for Hyper-V drivers (yet). The patch can also fix the hang issue in sub-channel's handling described above for all versions of kernels, including v4.19 and v4.20-rc4. So actually the patch should be applied to all the existing kernels, not only the kernels that have 8195b1396ec8. Fixes: 8195b1396ec8 ("hv_netvsc: fix deadlock on hotplug") Cc: stable@vger.kernel.org Cc: Stephen Hemminger <sthemmin@microsoft.com> Cc: K. Y. Srinivasan <kys@microsoft.com> Cc: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: Dexuan Cui <decui@microsoft.com> Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-12-03 00:54:35 +00:00
/*
* We need to set the flag, otherwise
* vmbus_onoffer_rescind() can be blocked.
*/
newchannel->probe_done = true;
if (primary_channel == NULL) {
list_del(&newchannel->listentry);
} else {
spin_lock_irqsave(&primary_channel->lock, flags);
list_del(&newchannel->sc_list);
spin_unlock_irqrestore(&primary_channel->lock, flags);
}
Drivers: hv: vmbus: Replace the per-CPU channel lists with a global array of channels When Hyper-V sends an interrupt to the guest, the guest has to figure out which channel the interrupt is associated with. Hyper-V sets a bit in a memory page that is shared with the guest, indicating a particular "relid" that the interrupt is associated with. The current Linux code then uses a set of per-CPU linked lists to map a given "relid" to a pointer to a channel structure. This design introduces a synchronization problem if the CPU that Hyper-V will interrupt for a certain channel is changed. If the interrupt comes on the "old CPU" and the channel was already moved to the per-CPU list of the "new CPU", then the relid -> channel mapping will fail and the interrupt is dropped. Similarly, if the interrupt comes on the new CPU but the channel was not moved to the per-CPU list of the new CPU, then the mapping will fail and the interrupt is dropped. Relids are integers ranging from 0 to 2047. The mapping from relids to channel structures can be done by setting up an array with 2048 entries, each entry being a pointer to a channel structure (hence total size ~16K bytes, which is not a problem). The array is global, so there are no per-CPU linked lists to update. The array can be searched and updated by loading from/storing to the array at the specified index. With no per-CPU data structures, the above mentioned synchronization problem is avoided and the relid2channel() function gets simpler. Suggested-by: Michael Kelley <mikelley@microsoft.com> Signed-off-by: Andrea Parri (Microsoft) <parri.andrea@gmail.com> Link: https://lore.kernel.org/r/20200406001514.19876-4-parri.andrea@gmail.com Reviewed-by: Michael Kelley <mikelley@microsoft.com> Signed-off-by: Wei Liu <wei.liu@kernel.org>
2020-04-06 00:15:06 +00:00
/* vmbus_process_offer() has mapped the channel. */
vmbus_channel_unmap_relid(newchannel);
Drivers: hv: vmbus: Replace the per-CPU channel lists with a global array of channels When Hyper-V sends an interrupt to the guest, the guest has to figure out which channel the interrupt is associated with. Hyper-V sets a bit in a memory page that is shared with the guest, indicating a particular "relid" that the interrupt is associated with. The current Linux code then uses a set of per-CPU linked lists to map a given "relid" to a pointer to a channel structure. This design introduces a synchronization problem if the CPU that Hyper-V will interrupt for a certain channel is changed. If the interrupt comes on the "old CPU" and the channel was already moved to the per-CPU list of the "new CPU", then the relid -> channel mapping will fail and the interrupt is dropped. Similarly, if the interrupt comes on the new CPU but the channel was not moved to the per-CPU list of the new CPU, then the mapping will fail and the interrupt is dropped. Relids are integers ranging from 0 to 2047. The mapping from relids to channel structures can be done by setting up an array with 2048 entries, each entry being a pointer to a channel structure (hence total size ~16K bytes, which is not a problem). The array is global, so there are no per-CPU linked lists to update. The array can be searched and updated by loading from/storing to the array at the specified index. With no per-CPU data structures, the above mentioned synchronization problem is avoided and the relid2channel() function gets simpler. Suggested-by: Michael Kelley <mikelley@microsoft.com> Signed-off-by: Andrea Parri (Microsoft) <parri.andrea@gmail.com> Link: https://lore.kernel.org/r/20200406001514.19876-4-parri.andrea@gmail.com Reviewed-by: Michael Kelley <mikelley@microsoft.com> Signed-off-by: Wei Liu <wei.liu@kernel.org>
2020-04-06 00:15:06 +00:00
mutex_unlock(&vmbus_connection.channel_mutex);
vmbus_release_relid(newchannel->offermsg.child_relid);
free_channel(newchannel);
}
Drivers: hv: vmbus: Offload the handling of channels to two workqueues vmbus_process_offer() mustn't call channel->sc_creation_callback() directly for sub-channels, because sc_creation_callback() -> vmbus_open() may never get the host's response to the OPEN_CHANNEL message (the host may rescind a channel at any time, e.g. in the case of hot removing a NIC), and vmbus_onoffer_rescind() may not wake up the vmbus_open() as it's blocked due to a non-zero vmbus_connection.offer_in_progress, and finally we have a deadlock. The above is also true for primary channels, if the related device drivers use sync probing mode by default. And, usually the handling of primary channels and sub-channels can depend on each other, so we should offload them to different workqueues to avoid possible deadlock, e.g. in sync-probing mode, NIC1's netvsc_subchan_work() can race with NIC2's netvsc_probe() -> rtnl_lock(), and causes deadlock: the former gets the rtnl_lock and waits for all the sub-channels to appear, but the latter can't get the rtnl_lock and this blocks the handling of sub-channels. The patch can fix the multiple-NIC deadlock described above for v3.x kernels (e.g. RHEL 7.x) which don't support async-probing of devices, and v4.4, v4.9, v4.14 and v4.18 which support async-probing but don't enable async-probing for Hyper-V drivers (yet). The patch can also fix the hang issue in sub-channel's handling described above for all versions of kernels, including v4.19 and v4.20-rc4. So actually the patch should be applied to all the existing kernels, not only the kernels that have 8195b1396ec8. Fixes: 8195b1396ec8 ("hv_netvsc: fix deadlock on hotplug") Cc: stable@vger.kernel.org Cc: Stephen Hemminger <sthemmin@microsoft.com> Cc: K. Y. Srinivasan <kys@microsoft.com> Cc: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: Dexuan Cui <decui@microsoft.com> Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-12-03 00:54:35 +00:00
/*
* vmbus_process_offer - Process the offer by creating a channel/device
* associated with this offer
*/
static void vmbus_process_offer(struct vmbus_channel *newchannel)
{
struct vmbus_channel *channel;
struct workqueue_struct *wq;
unsigned long flags;
bool fnew = true;
/*
* Initialize the target_CPU before inserting the channel in
* the chn_list and sc_list lists, within the channel_mutex
* critical section:
*
* CPU1 CPU2
*
* [vmbus_process_offer()] [hv_syninc_cleanup()]
*
* STORE target_cpu LOCK channel_mutex
* LOCK channel_mutex SEARCH chn_list
* INSERT chn_list LOAD target_cpu
* UNLOCK channel_mutex UNLOCK channel_mutex
*
* Forbids: CPU2's SEARCH from seeing CPU1's INSERT &&
* CPU2's LOAD from *not* seing CPU1's STORE
*/
init_vp_index(newchannel, hv_get_dev_type(newchannel));
Drivers: hv: vmbus: Offload the handling of channels to two workqueues vmbus_process_offer() mustn't call channel->sc_creation_callback() directly for sub-channels, because sc_creation_callback() -> vmbus_open() may never get the host's response to the OPEN_CHANNEL message (the host may rescind a channel at any time, e.g. in the case of hot removing a NIC), and vmbus_onoffer_rescind() may not wake up the vmbus_open() as it's blocked due to a non-zero vmbus_connection.offer_in_progress, and finally we have a deadlock. The above is also true for primary channels, if the related device drivers use sync probing mode by default. And, usually the handling of primary channels and sub-channels can depend on each other, so we should offload them to different workqueues to avoid possible deadlock, e.g. in sync-probing mode, NIC1's netvsc_subchan_work() can race with NIC2's netvsc_probe() -> rtnl_lock(), and causes deadlock: the former gets the rtnl_lock and waits for all the sub-channels to appear, but the latter can't get the rtnl_lock and this blocks the handling of sub-channels. The patch can fix the multiple-NIC deadlock described above for v3.x kernels (e.g. RHEL 7.x) which don't support async-probing of devices, and v4.4, v4.9, v4.14 and v4.18 which support async-probing but don't enable async-probing for Hyper-V drivers (yet). The patch can also fix the hang issue in sub-channel's handling described above for all versions of kernels, including v4.19 and v4.20-rc4. So actually the patch should be applied to all the existing kernels, not only the kernels that have 8195b1396ec8. Fixes: 8195b1396ec8 ("hv_netvsc: fix deadlock on hotplug") Cc: stable@vger.kernel.org Cc: Stephen Hemminger <sthemmin@microsoft.com> Cc: K. Y. Srinivasan <kys@microsoft.com> Cc: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: Dexuan Cui <decui@microsoft.com> Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-12-03 00:54:35 +00:00
mutex_lock(&vmbus_connection.channel_mutex);
/* Remember the channels that should be cleaned up upon suspend. */
if (is_hvsock_channel(newchannel) || is_sub_channel(newchannel))
atomic_inc(&vmbus_connection.nr_chan_close_on_suspend);
Drivers: hv: vmbus: Offload the handling of channels to two workqueues vmbus_process_offer() mustn't call channel->sc_creation_callback() directly for sub-channels, because sc_creation_callback() -> vmbus_open() may never get the host's response to the OPEN_CHANNEL message (the host may rescind a channel at any time, e.g. in the case of hot removing a NIC), and vmbus_onoffer_rescind() may not wake up the vmbus_open() as it's blocked due to a non-zero vmbus_connection.offer_in_progress, and finally we have a deadlock. The above is also true for primary channels, if the related device drivers use sync probing mode by default. And, usually the handling of primary channels and sub-channels can depend on each other, so we should offload them to different workqueues to avoid possible deadlock, e.g. in sync-probing mode, NIC1's netvsc_subchan_work() can race with NIC2's netvsc_probe() -> rtnl_lock(), and causes deadlock: the former gets the rtnl_lock and waits for all the sub-channels to appear, but the latter can't get the rtnl_lock and this blocks the handling of sub-channels. The patch can fix the multiple-NIC deadlock described above for v3.x kernels (e.g. RHEL 7.x) which don't support async-probing of devices, and v4.4, v4.9, v4.14 and v4.18 which support async-probing but don't enable async-probing for Hyper-V drivers (yet). The patch can also fix the hang issue in sub-channel's handling described above for all versions of kernels, including v4.19 and v4.20-rc4. So actually the patch should be applied to all the existing kernels, not only the kernels that have 8195b1396ec8. Fixes: 8195b1396ec8 ("hv_netvsc: fix deadlock on hotplug") Cc: stable@vger.kernel.org Cc: Stephen Hemminger <sthemmin@microsoft.com> Cc: K. Y. Srinivasan <kys@microsoft.com> Cc: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: Dexuan Cui <decui@microsoft.com> Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-12-03 00:54:35 +00:00
/*
* Now that we have acquired the channel_mutex,
* we can release the potentially racing rescind thread.
*/
atomic_dec(&vmbus_connection.offer_in_progress);
list_for_each_entry(channel, &vmbus_connection.chn_list, listentry) {
if (guid_equal(&channel->offermsg.offer.if_type,
&newchannel->offermsg.offer.if_type) &&
guid_equal(&channel->offermsg.offer.if_instance,
&newchannel->offermsg.offer.if_instance)) {
Drivers: hv: vmbus: Offload the handling of channels to two workqueues vmbus_process_offer() mustn't call channel->sc_creation_callback() directly for sub-channels, because sc_creation_callback() -> vmbus_open() may never get the host's response to the OPEN_CHANNEL message (the host may rescind a channel at any time, e.g. in the case of hot removing a NIC), and vmbus_onoffer_rescind() may not wake up the vmbus_open() as it's blocked due to a non-zero vmbus_connection.offer_in_progress, and finally we have a deadlock. The above is also true for primary channels, if the related device drivers use sync probing mode by default. And, usually the handling of primary channels and sub-channels can depend on each other, so we should offload them to different workqueues to avoid possible deadlock, e.g. in sync-probing mode, NIC1's netvsc_subchan_work() can race with NIC2's netvsc_probe() -> rtnl_lock(), and causes deadlock: the former gets the rtnl_lock and waits for all the sub-channels to appear, but the latter can't get the rtnl_lock and this blocks the handling of sub-channels. The patch can fix the multiple-NIC deadlock described above for v3.x kernels (e.g. RHEL 7.x) which don't support async-probing of devices, and v4.4, v4.9, v4.14 and v4.18 which support async-probing but don't enable async-probing for Hyper-V drivers (yet). The patch can also fix the hang issue in sub-channel's handling described above for all versions of kernels, including v4.19 and v4.20-rc4. So actually the patch should be applied to all the existing kernels, not only the kernels that have 8195b1396ec8. Fixes: 8195b1396ec8 ("hv_netvsc: fix deadlock on hotplug") Cc: stable@vger.kernel.org Cc: Stephen Hemminger <sthemmin@microsoft.com> Cc: K. Y. Srinivasan <kys@microsoft.com> Cc: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: Dexuan Cui <decui@microsoft.com> Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-12-03 00:54:35 +00:00
fnew = false;
break;
}
}
if (fnew)
list_add_tail(&newchannel->listentry,
&vmbus_connection.chn_list);
else {
/*
* Check to see if this is a valid sub-channel.
*/
if (newchannel->offermsg.offer.sub_channel_index == 0) {
mutex_unlock(&vmbus_connection.channel_mutex);
/*
* Don't call free_channel(), because newchannel->kobj
* is not initialized yet.
*/
kfree(newchannel);
WARN_ON_ONCE(1);
return;
}
/*
* Process the sub-channel.
*/
newchannel->primary_channel = channel;
spin_lock_irqsave(&channel->lock, flags);
list_add_tail(&newchannel->sc_list, &channel->sc_list);
spin_unlock_irqrestore(&channel->lock, flags);
}
Drivers: hv: vmbus: Replace the per-CPU channel lists with a global array of channels When Hyper-V sends an interrupt to the guest, the guest has to figure out which channel the interrupt is associated with. Hyper-V sets a bit in a memory page that is shared with the guest, indicating a particular "relid" that the interrupt is associated with. The current Linux code then uses a set of per-CPU linked lists to map a given "relid" to a pointer to a channel structure. This design introduces a synchronization problem if the CPU that Hyper-V will interrupt for a certain channel is changed. If the interrupt comes on the "old CPU" and the channel was already moved to the per-CPU list of the "new CPU", then the relid -> channel mapping will fail and the interrupt is dropped. Similarly, if the interrupt comes on the new CPU but the channel was not moved to the per-CPU list of the new CPU, then the mapping will fail and the interrupt is dropped. Relids are integers ranging from 0 to 2047. The mapping from relids to channel structures can be done by setting up an array with 2048 entries, each entry being a pointer to a channel structure (hence total size ~16K bytes, which is not a problem). The array is global, so there are no per-CPU linked lists to update. The array can be searched and updated by loading from/storing to the array at the specified index. With no per-CPU data structures, the above mentioned synchronization problem is avoided and the relid2channel() function gets simpler. Suggested-by: Michael Kelley <mikelley@microsoft.com> Signed-off-by: Andrea Parri (Microsoft) <parri.andrea@gmail.com> Link: https://lore.kernel.org/r/20200406001514.19876-4-parri.andrea@gmail.com Reviewed-by: Michael Kelley <mikelley@microsoft.com> Signed-off-by: Wei Liu <wei.liu@kernel.org>
2020-04-06 00:15:06 +00:00
vmbus_channel_map_relid(newchannel);
Drivers: hv: vmbus: Offload the handling of channels to two workqueues vmbus_process_offer() mustn't call channel->sc_creation_callback() directly for sub-channels, because sc_creation_callback() -> vmbus_open() may never get the host's response to the OPEN_CHANNEL message (the host may rescind a channel at any time, e.g. in the case of hot removing a NIC), and vmbus_onoffer_rescind() may not wake up the vmbus_open() as it's blocked due to a non-zero vmbus_connection.offer_in_progress, and finally we have a deadlock. The above is also true for primary channels, if the related device drivers use sync probing mode by default. And, usually the handling of primary channels and sub-channels can depend on each other, so we should offload them to different workqueues to avoid possible deadlock, e.g. in sync-probing mode, NIC1's netvsc_subchan_work() can race with NIC2's netvsc_probe() -> rtnl_lock(), and causes deadlock: the former gets the rtnl_lock and waits for all the sub-channels to appear, but the latter can't get the rtnl_lock and this blocks the handling of sub-channels. The patch can fix the multiple-NIC deadlock described above for v3.x kernels (e.g. RHEL 7.x) which don't support async-probing of devices, and v4.4, v4.9, v4.14 and v4.18 which support async-probing but don't enable async-probing for Hyper-V drivers (yet). The patch can also fix the hang issue in sub-channel's handling described above for all versions of kernels, including v4.19 and v4.20-rc4. So actually the patch should be applied to all the existing kernels, not only the kernels that have 8195b1396ec8. Fixes: 8195b1396ec8 ("hv_netvsc: fix deadlock on hotplug") Cc: stable@vger.kernel.org Cc: Stephen Hemminger <sthemmin@microsoft.com> Cc: K. Y. Srinivasan <kys@microsoft.com> Cc: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: Dexuan Cui <decui@microsoft.com> Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-12-03 00:54:35 +00:00
mutex_unlock(&vmbus_connection.channel_mutex);
/*
* vmbus_process_offer() mustn't call channel->sc_creation_callback()
* directly for sub-channels, because sc_creation_callback() ->
* vmbus_open() may never get the host's response to the
* OPEN_CHANNEL message (the host may rescind a channel at any time,
* e.g. in the case of hot removing a NIC), and vmbus_onoffer_rescind()
* may not wake up the vmbus_open() as it's blocked due to a non-zero
* vmbus_connection.offer_in_progress, and finally we have a deadlock.
*
* The above is also true for primary channels, if the related device
* drivers use sync probing mode by default.
*
* And, usually the handling of primary channels and sub-channels can
* depend on each other, so we should offload them to different
* workqueues to avoid possible deadlock, e.g. in sync-probing mode,
* NIC1's netvsc_subchan_work() can race with NIC2's netvsc_probe() ->
* rtnl_lock(), and causes deadlock: the former gets the rtnl_lock
* and waits for all the sub-channels to appear, but the latter
* can't get the rtnl_lock and this blocks the handling of
* sub-channels.
*/
INIT_WORK(&newchannel->add_channel_work, vmbus_add_channel_work);
wq = fnew ? vmbus_connection.handle_primary_chan_wq :
vmbus_connection.handle_sub_chan_wq;
queue_work(wq, &newchannel->add_channel_work);
}
/*
* We use this state to statically distribute the channel interrupt load.
*/
static int next_numa_node_id;
Drivers: hv: vmbus: Offload the handling of channels to two workqueues vmbus_process_offer() mustn't call channel->sc_creation_callback() directly for sub-channels, because sc_creation_callback() -> vmbus_open() may never get the host's response to the OPEN_CHANNEL message (the host may rescind a channel at any time, e.g. in the case of hot removing a NIC), and vmbus_onoffer_rescind() may not wake up the vmbus_open() as it's blocked due to a non-zero vmbus_connection.offer_in_progress, and finally we have a deadlock. The above is also true for primary channels, if the related device drivers use sync probing mode by default. And, usually the handling of primary channels and sub-channels can depend on each other, so we should offload them to different workqueues to avoid possible deadlock, e.g. in sync-probing mode, NIC1's netvsc_subchan_work() can race with NIC2's netvsc_probe() -> rtnl_lock(), and causes deadlock: the former gets the rtnl_lock and waits for all the sub-channels to appear, but the latter can't get the rtnl_lock and this blocks the handling of sub-channels. The patch can fix the multiple-NIC deadlock described above for v3.x kernels (e.g. RHEL 7.x) which don't support async-probing of devices, and v4.4, v4.9, v4.14 and v4.18 which support async-probing but don't enable async-probing for Hyper-V drivers (yet). The patch can also fix the hang issue in sub-channel's handling described above for all versions of kernels, including v4.19 and v4.20-rc4. So actually the patch should be applied to all the existing kernels, not only the kernels that have 8195b1396ec8. Fixes: 8195b1396ec8 ("hv_netvsc: fix deadlock on hotplug") Cc: stable@vger.kernel.org Cc: Stephen Hemminger <sthemmin@microsoft.com> Cc: K. Y. Srinivasan <kys@microsoft.com> Cc: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: Dexuan Cui <decui@microsoft.com> Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-12-03 00:54:35 +00:00
/*
* init_vp_index() accesses global variables like next_numa_node_id, and
* it can run concurrently for primary channels and sub-channels: see
* vmbus_process_offer(), so we need the lock to protect the global
* variables.
*/
static DEFINE_SPINLOCK(bind_channel_to_cpu_lock);
/*
* Starting with Win8, we can statically distribute the incoming
* channel interrupt load by binding a channel to VCPU.
*
* For pre-win8 hosts or non-performance critical channels we assign the
* VMBUS_CONNECT_CPU.
*
* Starting with win8, performance critical channels will be distributed
* evenly among all the available NUMA nodes. Once the node is assigned,
* we will assign the CPU based on a simple round robin scheme.
*/
static void init_vp_index(struct vmbus_channel *channel, u16 dev_type)
{
bool perf_chn = vmbus_devs[dev_type].perf_device;
cpumask_var_t available_mask;
struct cpumask *alloced_mask;
u32 target_cpu;
int numa_node;
if ((vmbus_proto_version == VERSION_WS2008) ||
(vmbus_proto_version == VERSION_WIN7) || (!perf_chn) ||
!alloc_cpumask_var(&available_mask, GFP_KERNEL)) {
/*
* Prior to win8, all channel interrupts are
* delivered on VMBUS_CONNECT_CPU.
* Also if the channel is not a performance critical
* channel, bind it to VMBUS_CONNECT_CPU.
* In case alloc_cpumask_var() fails, bind it to
* VMBUS_CONNECT_CPU.
*/
channel->numa_node = cpu_to_node(VMBUS_CONNECT_CPU);
channel->target_cpu = VMBUS_CONNECT_CPU;
channel->target_vp =
hv_cpu_number_to_vp_number(VMBUS_CONNECT_CPU);
return;
}
/* No CPUs can come up or down during this. */
cpus_read_lock();
/*
* Serializes the accesses to the global variable next_numa_node_id.
* See also the header comment of the spin lock declaration.
*/
spin_lock(&bind_channel_to_cpu_lock);
while (true) {
numa_node = next_numa_node_id++;
if (numa_node == nr_node_ids) {
next_numa_node_id = 0;
continue;
}
if (cpumask_empty(cpumask_of_node(numa_node)))
continue;
break;
}
channel->numa_node = numa_node;
alloced_mask = &hv_context.hv_numa_map[numa_node];
if (cpumask_weight(alloced_mask) ==
cpumask_weight(cpumask_of_node(numa_node))) {
/*
* We have cycled through all the CPUs in the node;
* reset the alloced map.
*/
cpumask_clear(alloced_mask);
}
cpumask_xor(available_mask, alloced_mask, cpumask_of_node(numa_node));
target_cpu = cpumask_first(available_mask);
cpumask_set_cpu(target_cpu, alloced_mask);
channel->target_cpu = target_cpu;
channel->target_vp = hv_cpu_number_to_vp_number(target_cpu);
Drivers: hv: vmbus: Offload the handling of channels to two workqueues vmbus_process_offer() mustn't call channel->sc_creation_callback() directly for sub-channels, because sc_creation_callback() -> vmbus_open() may never get the host's response to the OPEN_CHANNEL message (the host may rescind a channel at any time, e.g. in the case of hot removing a NIC), and vmbus_onoffer_rescind() may not wake up the vmbus_open() as it's blocked due to a non-zero vmbus_connection.offer_in_progress, and finally we have a deadlock. The above is also true for primary channels, if the related device drivers use sync probing mode by default. And, usually the handling of primary channels and sub-channels can depend on each other, so we should offload them to different workqueues to avoid possible deadlock, e.g. in sync-probing mode, NIC1's netvsc_subchan_work() can race with NIC2's netvsc_probe() -> rtnl_lock(), and causes deadlock: the former gets the rtnl_lock and waits for all the sub-channels to appear, but the latter can't get the rtnl_lock and this blocks the handling of sub-channels. The patch can fix the multiple-NIC deadlock described above for v3.x kernels (e.g. RHEL 7.x) which don't support async-probing of devices, and v4.4, v4.9, v4.14 and v4.18 which support async-probing but don't enable async-probing for Hyper-V drivers (yet). The patch can also fix the hang issue in sub-channel's handling described above for all versions of kernels, including v4.19 and v4.20-rc4. So actually the patch should be applied to all the existing kernels, not only the kernels that have 8195b1396ec8. Fixes: 8195b1396ec8 ("hv_netvsc: fix deadlock on hotplug") Cc: stable@vger.kernel.org Cc: Stephen Hemminger <sthemmin@microsoft.com> Cc: K. Y. Srinivasan <kys@microsoft.com> Cc: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: Dexuan Cui <decui@microsoft.com> Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-12-03 00:54:35 +00:00
spin_unlock(&bind_channel_to_cpu_lock);
cpus_read_unlock();
Drivers: hv: vmbus: Offload the handling of channels to two workqueues vmbus_process_offer() mustn't call channel->sc_creation_callback() directly for sub-channels, because sc_creation_callback() -> vmbus_open() may never get the host's response to the OPEN_CHANNEL message (the host may rescind a channel at any time, e.g. in the case of hot removing a NIC), and vmbus_onoffer_rescind() may not wake up the vmbus_open() as it's blocked due to a non-zero vmbus_connection.offer_in_progress, and finally we have a deadlock. The above is also true for primary channels, if the related device drivers use sync probing mode by default. And, usually the handling of primary channels and sub-channels can depend on each other, so we should offload them to different workqueues to avoid possible deadlock, e.g. in sync-probing mode, NIC1's netvsc_subchan_work() can race with NIC2's netvsc_probe() -> rtnl_lock(), and causes deadlock: the former gets the rtnl_lock and waits for all the sub-channels to appear, but the latter can't get the rtnl_lock and this blocks the handling of sub-channels. The patch can fix the multiple-NIC deadlock described above for v3.x kernels (e.g. RHEL 7.x) which don't support async-probing of devices, and v4.4, v4.9, v4.14 and v4.18 which support async-probing but don't enable async-probing for Hyper-V drivers (yet). The patch can also fix the hang issue in sub-channel's handling described above for all versions of kernels, including v4.19 and v4.20-rc4. So actually the patch should be applied to all the existing kernels, not only the kernels that have 8195b1396ec8. Fixes: 8195b1396ec8 ("hv_netvsc: fix deadlock on hotplug") Cc: stable@vger.kernel.org Cc: Stephen Hemminger <sthemmin@microsoft.com> Cc: K. Y. Srinivasan <kys@microsoft.com> Cc: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: Dexuan Cui <decui@microsoft.com> Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-12-03 00:54:35 +00:00
free_cpumask_var(available_mask);
}
static void vmbus_wait_for_unload(void)
{
int cpu;
void *page_addr;
struct hv_message *msg;
struct vmbus_channel_message_header *hdr;
u32 message_type;
/*
* CHANNELMSG_UNLOAD_RESPONSE is always delivered to the CPU which was
* used for initial contact or to CPU0 depending on host version. When
* we're crashing on a different CPU let's hope that IRQ handler on
* the cpu which receives CHANNELMSG_UNLOAD_RESPONSE is still
* functional and vmbus_unload_response() will complete
* vmbus_connection.unload_event. If not, the last thing we can do is
* read message pages for all CPUs directly.
*/
while (1) {
if (completion_done(&vmbus_connection.unload_event))
break;
for_each_online_cpu(cpu) {
struct hv_per_cpu_context *hv_cpu
= per_cpu_ptr(hv_context.cpu_context, cpu);
page_addr = hv_cpu->synic_message_page;
msg = (struct hv_message *)page_addr
+ VMBUS_MESSAGE_SINT;
message_type = READ_ONCE(msg->header.message_type);
if (message_type == HVMSG_NONE)
continue;
hdr = (struct vmbus_channel_message_header *)
msg->u.payload;
if (hdr->msgtype == CHANNELMSG_UNLOAD_RESPONSE)
complete(&vmbus_connection.unload_event);
vmbus_signal_eom(msg, message_type);
}
mdelay(10);
}
/*
* We're crashing and already got the UNLOAD_RESPONSE, cleanup all
* maybe-pending messages on all CPUs to be able to receive new
* messages after we reconnect.
*/
for_each_online_cpu(cpu) {
struct hv_per_cpu_context *hv_cpu
= per_cpu_ptr(hv_context.cpu_context, cpu);
page_addr = hv_cpu->synic_message_page;
msg = (struct hv_message *)page_addr + VMBUS_MESSAGE_SINT;
msg->header.message_type = HVMSG_NONE;
}
}
/*
* vmbus_unload_response - Handler for the unload response.
*/
static void vmbus_unload_response(struct vmbus_channel_message_header *hdr)
{
/*
* This is a global event; just wakeup the waiting thread.
* Once we successfully unload, we can cleanup the monitor state.
*/
complete(&vmbus_connection.unload_event);
}
void vmbus_initiate_unload(bool crash)
{
struct vmbus_channel_message_header hdr;
if (xchg(&vmbus_connection.conn_state, DISCONNECTED) == DISCONNECTED)
return;
/* Pre-Win2012R2 hosts don't support reconnect */
if (vmbus_proto_version < VERSION_WIN8_1)
return;
init_completion(&vmbus_connection.unload_event);
memset(&hdr, 0, sizeof(struct vmbus_channel_message_header));
hdr.msgtype = CHANNELMSG_UNLOAD;
vmbus_post_msg(&hdr, sizeof(struct vmbus_channel_message_header),
!crash);
/*
* vmbus_initiate_unload() is also called on crash and the crash can be
* happening in an interrupt context, where scheduling is impossible.
*/
if (!crash)
wait_for_completion(&vmbus_connection.unload_event);
else
vmbus_wait_for_unload();
}
static void check_ready_for_resume_event(void)
{
/*
* If all the old primary channels have been fixed up, then it's safe
* to resume.
*/
if (atomic_dec_and_test(&vmbus_connection.nr_chan_fixup_on_resume))
complete(&vmbus_connection.ready_for_resume_event);
}
static void vmbus_setup_channel_state(struct vmbus_channel *channel,
struct vmbus_channel_offer_channel *offer)
{
/*
* Setup state for signalling the host.
*/
channel->sig_event = VMBUS_EVENT_CONNECTION_ID;
if (vmbus_proto_version != VERSION_WS2008) {
channel->is_dedicated_interrupt =
(offer->is_dedicated_interrupt != 0);
channel->sig_event = offer->connection_id;
}
memcpy(&channel->offermsg, offer,
sizeof(struct vmbus_channel_offer_channel));
channel->monitor_grp = (u8)offer->monitorid / 32;
channel->monitor_bit = (u8)offer->monitorid % 32;
}
/*
* find_primary_channel_by_offer - Get the channel object given the new offer.
* This is only used in the resume path of hibernation.
*/
static struct vmbus_channel *
find_primary_channel_by_offer(const struct vmbus_channel_offer_channel *offer)
{
struct vmbus_channel *channel = NULL, *iter;
const guid_t *inst1, *inst2;
/* Ignore sub-channel offers. */
if (offer->offer.sub_channel_index != 0)
return NULL;
mutex_lock(&vmbus_connection.channel_mutex);
list_for_each_entry(iter, &vmbus_connection.chn_list, listentry) {
inst1 = &iter->offermsg.offer.if_instance;
inst2 = &offer->offer.if_instance;
if (guid_equal(inst1, inst2)) {
channel = iter;
break;
}
}
mutex_unlock(&vmbus_connection.channel_mutex);
return channel;
}
/*
* vmbus_onoffer - Handler for channel offers from vmbus in parent partition.
*
*/
static void vmbus_onoffer(struct vmbus_channel_message_header *hdr)
{
struct vmbus_channel_offer_channel *offer;
struct vmbus_channel *oldchannel, *newchannel;
size_t offer_sz;
offer = (struct vmbus_channel_offer_channel *)hdr;
trace_vmbus_onoffer(offer);
oldchannel = find_primary_channel_by_offer(offer);
if (oldchannel != NULL) {
/*
* We're resuming from hibernation: all the sub-channel and
* hv_sock channels we had before the hibernation should have
* been cleaned up, and now we must be seeing a re-offered
* primary channel that we had before the hibernation.
*/
Drivers: hv: vmbus: Replace the per-CPU channel lists with a global array of channels When Hyper-V sends an interrupt to the guest, the guest has to figure out which channel the interrupt is associated with. Hyper-V sets a bit in a memory page that is shared with the guest, indicating a particular "relid" that the interrupt is associated with. The current Linux code then uses a set of per-CPU linked lists to map a given "relid" to a pointer to a channel structure. This design introduces a synchronization problem if the CPU that Hyper-V will interrupt for a certain channel is changed. If the interrupt comes on the "old CPU" and the channel was already moved to the per-CPU list of the "new CPU", then the relid -> channel mapping will fail and the interrupt is dropped. Similarly, if the interrupt comes on the new CPU but the channel was not moved to the per-CPU list of the new CPU, then the mapping will fail and the interrupt is dropped. Relids are integers ranging from 0 to 2047. The mapping from relids to channel structures can be done by setting up an array with 2048 entries, each entry being a pointer to a channel structure (hence total size ~16K bytes, which is not a problem). The array is global, so there are no per-CPU linked lists to update. The array can be searched and updated by loading from/storing to the array at the specified index. With no per-CPU data structures, the above mentioned synchronization problem is avoided and the relid2channel() function gets simpler. Suggested-by: Michael Kelley <mikelley@microsoft.com> Signed-off-by: Andrea Parri (Microsoft) <parri.andrea@gmail.com> Link: https://lore.kernel.org/r/20200406001514.19876-4-parri.andrea@gmail.com Reviewed-by: Michael Kelley <mikelley@microsoft.com> Signed-off-by: Wei Liu <wei.liu@kernel.org>
2020-04-06 00:15:06 +00:00
/*
* { Initially: channel relid = INVALID_RELID,
* channels[valid_relid] = NULL }
*
* CPU1 CPU2
*
* [vmbus_onoffer()] [vmbus_device_release()]
*
* LOCK channel_mutex LOCK channel_mutex
* STORE channel relid = valid_relid LOAD r1 = channel relid
* MAP_RELID channel if (r1 != INVALID_RELID)
* UNLOCK channel_mutex UNMAP_RELID channel
* UNLOCK channel_mutex
*
* Forbids: r1 == valid_relid &&
* channels[valid_relid] == channel
*
* Note. r1 can be INVALID_RELID only for an hv_sock channel.
* None of the hv_sock channels which were present before the
* suspend are re-offered upon the resume. See the WARN_ON()
* in hv_process_channel_removal().
*/
mutex_lock(&vmbus_connection.channel_mutex);
atomic_dec(&vmbus_connection.offer_in_progress);
WARN_ON(oldchannel->offermsg.child_relid != INVALID_RELID);
/* Fix up the relid. */
oldchannel->offermsg.child_relid = offer->child_relid;
offer_sz = sizeof(*offer);
Drivers: hv: vmbus: Replace the per-CPU channel lists with a global array of channels When Hyper-V sends an interrupt to the guest, the guest has to figure out which channel the interrupt is associated with. Hyper-V sets a bit in a memory page that is shared with the guest, indicating a particular "relid" that the interrupt is associated with. The current Linux code then uses a set of per-CPU linked lists to map a given "relid" to a pointer to a channel structure. This design introduces a synchronization problem if the CPU that Hyper-V will interrupt for a certain channel is changed. If the interrupt comes on the "old CPU" and the channel was already moved to the per-CPU list of the "new CPU", then the relid -> channel mapping will fail and the interrupt is dropped. Similarly, if the interrupt comes on the new CPU but the channel was not moved to the per-CPU list of the new CPU, then the mapping will fail and the interrupt is dropped. Relids are integers ranging from 0 to 2047. The mapping from relids to channel structures can be done by setting up an array with 2048 entries, each entry being a pointer to a channel structure (hence total size ~16K bytes, which is not a problem). The array is global, so there are no per-CPU linked lists to update. The array can be searched and updated by loading from/storing to the array at the specified index. With no per-CPU data structures, the above mentioned synchronization problem is avoided and the relid2channel() function gets simpler. Suggested-by: Michael Kelley <mikelley@microsoft.com> Signed-off-by: Andrea Parri (Microsoft) <parri.andrea@gmail.com> Link: https://lore.kernel.org/r/20200406001514.19876-4-parri.andrea@gmail.com Reviewed-by: Michael Kelley <mikelley@microsoft.com> Signed-off-by: Wei Liu <wei.liu@kernel.org>
2020-04-06 00:15:06 +00:00
if (memcmp(offer, &oldchannel->offermsg, offer_sz) != 0) {
/*
* This is not an error, since the host can also change
* the other field(s) of the offer, e.g. on WS RS5
* (Build 17763), the offer->connection_id of the
* Mellanox VF vmbus device can change when the host
* reoffers the device upon resume.
*/
pr_debug("vmbus offer changed: relid=%d\n",
offer->child_relid);
print_hex_dump_debug("Old vmbus offer: ",
DUMP_PREFIX_OFFSET, 16, 4,
&oldchannel->offermsg, offer_sz,
false);
print_hex_dump_debug("New vmbus offer: ",
DUMP_PREFIX_OFFSET, 16, 4,
offer, offer_sz, false);
/* Fix up the old channel. */
vmbus_setup_channel_state(oldchannel, offer);
}
Drivers: hv: vmbus: Replace the per-CPU channel lists with a global array of channels When Hyper-V sends an interrupt to the guest, the guest has to figure out which channel the interrupt is associated with. Hyper-V sets a bit in a memory page that is shared with the guest, indicating a particular "relid" that the interrupt is associated with. The current Linux code then uses a set of per-CPU linked lists to map a given "relid" to a pointer to a channel structure. This design introduces a synchronization problem if the CPU that Hyper-V will interrupt for a certain channel is changed. If the interrupt comes on the "old CPU" and the channel was already moved to the per-CPU list of the "new CPU", then the relid -> channel mapping will fail and the interrupt is dropped. Similarly, if the interrupt comes on the new CPU but the channel was not moved to the per-CPU list of the new CPU, then the mapping will fail and the interrupt is dropped. Relids are integers ranging from 0 to 2047. The mapping from relids to channel structures can be done by setting up an array with 2048 entries, each entry being a pointer to a channel structure (hence total size ~16K bytes, which is not a problem). The array is global, so there are no per-CPU linked lists to update. The array can be searched and updated by loading from/storing to the array at the specified index. With no per-CPU data structures, the above mentioned synchronization problem is avoided and the relid2channel() function gets simpler. Suggested-by: Michael Kelley <mikelley@microsoft.com> Signed-off-by: Andrea Parri (Microsoft) <parri.andrea@gmail.com> Link: https://lore.kernel.org/r/20200406001514.19876-4-parri.andrea@gmail.com Reviewed-by: Michael Kelley <mikelley@microsoft.com> Signed-off-by: Wei Liu <wei.liu@kernel.org>
2020-04-06 00:15:06 +00:00
/* Add the channel back to the array of channels. */
vmbus_channel_map_relid(oldchannel);
check_ready_for_resume_event();
Drivers: hv: vmbus: Replace the per-CPU channel lists with a global array of channels When Hyper-V sends an interrupt to the guest, the guest has to figure out which channel the interrupt is associated with. Hyper-V sets a bit in a memory page that is shared with the guest, indicating a particular "relid" that the interrupt is associated with. The current Linux code then uses a set of per-CPU linked lists to map a given "relid" to a pointer to a channel structure. This design introduces a synchronization problem if the CPU that Hyper-V will interrupt for a certain channel is changed. If the interrupt comes on the "old CPU" and the channel was already moved to the per-CPU list of the "new CPU", then the relid -> channel mapping will fail and the interrupt is dropped. Similarly, if the interrupt comes on the new CPU but the channel was not moved to the per-CPU list of the new CPU, then the mapping will fail and the interrupt is dropped. Relids are integers ranging from 0 to 2047. The mapping from relids to channel structures can be done by setting up an array with 2048 entries, each entry being a pointer to a channel structure (hence total size ~16K bytes, which is not a problem). The array is global, so there are no per-CPU linked lists to update. The array can be searched and updated by loading from/storing to the array at the specified index. With no per-CPU data structures, the above mentioned synchronization problem is avoided and the relid2channel() function gets simpler. Suggested-by: Michael Kelley <mikelley@microsoft.com> Signed-off-by: Andrea Parri (Microsoft) <parri.andrea@gmail.com> Link: https://lore.kernel.org/r/20200406001514.19876-4-parri.andrea@gmail.com Reviewed-by: Michael Kelley <mikelley@microsoft.com> Signed-off-by: Wei Liu <wei.liu@kernel.org>
2020-04-06 00:15:06 +00:00
mutex_unlock(&vmbus_connection.channel_mutex);
return;
}
/* Allocate the channel object and save this offer. */
newchannel = alloc_channel();
if (!newchannel) {
vmbus_release_relid(offer->child_relid);
atomic_dec(&vmbus_connection.offer_in_progress);
pr_err("Unable to allocate channel object\n");
return;
}
vmbus_setup_channel_state(newchannel, offer);
vmbus_process_offer(newchannel);
}
static void check_ready_for_suspend_event(void)
{
/*
* If all the sub-channels or hv_sock channels have been cleaned up,
* then it's safe to suspend.
*/
if (atomic_dec_and_test(&vmbus_connection.nr_chan_close_on_suspend))
complete(&vmbus_connection.ready_for_suspend_event);
}
/*
* vmbus_onoffer_rescind - Rescind offer handler.
*
* We queue a work item to process this offer synchronously
*/
static void vmbus_onoffer_rescind(struct vmbus_channel_message_header *hdr)
{
struct vmbus_channel_rescind_offer *rescind;
struct vmbus_channel *channel;
struct device *dev;
bool clean_up_chan_for_suspend;
rescind = (struct vmbus_channel_rescind_offer *)hdr;
trace_vmbus_onoffer_rescind(rescind);
/*
* The offer msg and the corresponding rescind msg
* from the host are guranteed to be ordered -
* offer comes in first and then the rescind.
* Since we process these events in work elements,
* and with preemption, we may end up processing
* the events out of order. We rely on the synchronization
* provided by offer_in_progress and by channel_mutex for
* ordering these events:
*
* { Initially: offer_in_progress = 1 }
*
* CPU1 CPU2
*
Drivers: hv: vmbus: Replace the per-CPU channel lists with a global array of channels When Hyper-V sends an interrupt to the guest, the guest has to figure out which channel the interrupt is associated with. Hyper-V sets a bit in a memory page that is shared with the guest, indicating a particular "relid" that the interrupt is associated with. The current Linux code then uses a set of per-CPU linked lists to map a given "relid" to a pointer to a channel structure. This design introduces a synchronization problem if the CPU that Hyper-V will interrupt for a certain channel is changed. If the interrupt comes on the "old CPU" and the channel was already moved to the per-CPU list of the "new CPU", then the relid -> channel mapping will fail and the interrupt is dropped. Similarly, if the interrupt comes on the new CPU but the channel was not moved to the per-CPU list of the new CPU, then the mapping will fail and the interrupt is dropped. Relids are integers ranging from 0 to 2047. The mapping from relids to channel structures can be done by setting up an array with 2048 entries, each entry being a pointer to a channel structure (hence total size ~16K bytes, which is not a problem). The array is global, so there are no per-CPU linked lists to update. The array can be searched and updated by loading from/storing to the array at the specified index. With no per-CPU data structures, the above mentioned synchronization problem is avoided and the relid2channel() function gets simpler. Suggested-by: Michael Kelley <mikelley@microsoft.com> Signed-off-by: Andrea Parri (Microsoft) <parri.andrea@gmail.com> Link: https://lore.kernel.org/r/20200406001514.19876-4-parri.andrea@gmail.com Reviewed-by: Michael Kelley <mikelley@microsoft.com> Signed-off-by: Wei Liu <wei.liu@kernel.org>
2020-04-06 00:15:06 +00:00
* [vmbus_onoffer()] [vmbus_onoffer_rescind()]
*
* LOCK channel_mutex WAIT_ON offer_in_progress == 0
* DECREMENT offer_in_progress LOCK channel_mutex
Drivers: hv: vmbus: Replace the per-CPU channel lists with a global array of channels When Hyper-V sends an interrupt to the guest, the guest has to figure out which channel the interrupt is associated with. Hyper-V sets a bit in a memory page that is shared with the guest, indicating a particular "relid" that the interrupt is associated with. The current Linux code then uses a set of per-CPU linked lists to map a given "relid" to a pointer to a channel structure. This design introduces a synchronization problem if the CPU that Hyper-V will interrupt for a certain channel is changed. If the interrupt comes on the "old CPU" and the channel was already moved to the per-CPU list of the "new CPU", then the relid -> channel mapping will fail and the interrupt is dropped. Similarly, if the interrupt comes on the new CPU but the channel was not moved to the per-CPU list of the new CPU, then the mapping will fail and the interrupt is dropped. Relids are integers ranging from 0 to 2047. The mapping from relids to channel structures can be done by setting up an array with 2048 entries, each entry being a pointer to a channel structure (hence total size ~16K bytes, which is not a problem). The array is global, so there are no per-CPU linked lists to update. The array can be searched and updated by loading from/storing to the array at the specified index. With no per-CPU data structures, the above mentioned synchronization problem is avoided and the relid2channel() function gets simpler. Suggested-by: Michael Kelley <mikelley@microsoft.com> Signed-off-by: Andrea Parri (Microsoft) <parri.andrea@gmail.com> Link: https://lore.kernel.org/r/20200406001514.19876-4-parri.andrea@gmail.com Reviewed-by: Michael Kelley <mikelley@microsoft.com> Signed-off-by: Wei Liu <wei.liu@kernel.org>
2020-04-06 00:15:06 +00:00
* STORE channels[] LOAD channels[]
* UNLOCK channel_mutex UNLOCK channel_mutex
*
Drivers: hv: vmbus: Replace the per-CPU channel lists with a global array of channels When Hyper-V sends an interrupt to the guest, the guest has to figure out which channel the interrupt is associated with. Hyper-V sets a bit in a memory page that is shared with the guest, indicating a particular "relid" that the interrupt is associated with. The current Linux code then uses a set of per-CPU linked lists to map a given "relid" to a pointer to a channel structure. This design introduces a synchronization problem if the CPU that Hyper-V will interrupt for a certain channel is changed. If the interrupt comes on the "old CPU" and the channel was already moved to the per-CPU list of the "new CPU", then the relid -> channel mapping will fail and the interrupt is dropped. Similarly, if the interrupt comes on the new CPU but the channel was not moved to the per-CPU list of the new CPU, then the mapping will fail and the interrupt is dropped. Relids are integers ranging from 0 to 2047. The mapping from relids to channel structures can be done by setting up an array with 2048 entries, each entry being a pointer to a channel structure (hence total size ~16K bytes, which is not a problem). The array is global, so there are no per-CPU linked lists to update. The array can be searched and updated by loading from/storing to the array at the specified index. With no per-CPU data structures, the above mentioned synchronization problem is avoided and the relid2channel() function gets simpler. Suggested-by: Michael Kelley <mikelley@microsoft.com> Signed-off-by: Andrea Parri (Microsoft) <parri.andrea@gmail.com> Link: https://lore.kernel.org/r/20200406001514.19876-4-parri.andrea@gmail.com Reviewed-by: Michael Kelley <mikelley@microsoft.com> Signed-off-by: Wei Liu <wei.liu@kernel.org>
2020-04-06 00:15:06 +00:00
* Forbids: CPU2's LOAD from *not* seeing CPU1's STORE
*/
while (atomic_read(&vmbus_connection.offer_in_progress) != 0) {
/*
* We wait here until any channel offer is currently
* being processed.
*/
msleep(1);
}
mutex_lock(&vmbus_connection.channel_mutex);
channel = relid2channel(rescind->child_relid);
mutex_unlock(&vmbus_connection.channel_mutex);
if (channel == NULL) {
/*
* We failed in processing the offer message;
* we would have cleaned up the relid in that
* failure path.
*/
return;
}
clean_up_chan_for_suspend = is_hvsock_channel(channel) ||
is_sub_channel(channel);
/*
* Before setting channel->rescind in vmbus_rescind_cleanup(), we
* should make sure the channel callback is not running any more.
*/
vmbus_reset_channel_cb(channel);
/*
* Now wait for offer handling to complete.
*/
vmbus_rescind_cleanup(channel);
while (READ_ONCE(channel->probe_done) == false) {
/*
* We wait here until any channel offer is currently
* being processed.
*/
msleep(1);
}
/*
* At this point, the rescind handling can proceed safely.
*/
if (channel->device_obj) {
if (channel->chn_rescind_callback) {
channel->chn_rescind_callback(channel);
if (clean_up_chan_for_suspend)
check_ready_for_suspend_event();
return;
}
/*
* We will have to unregister this device from the
* driver core.
*/
dev = get_device(&channel->device_obj->device);
if (dev) {
vmbus_device_unregister(channel->device_obj);
put_device(dev);
}
}
if (channel->primary_channel != NULL) {
/*
* Sub-channel is being rescinded. Following is the channel
* close sequence when initiated from the driveri (refer to
* vmbus_close() for details):
* 1. Close all sub-channels first
* 2. Then close the primary channel.
*/
mutex_lock(&vmbus_connection.channel_mutex);
if (channel->state == CHANNEL_OPEN_STATE) {
/*
* The channel is currently not open;
* it is safe for us to cleanup the channel.
*/
hv_process_channel_removal(channel);
} else {
complete(&channel->rescind_event);
}
mutex_unlock(&vmbus_connection.channel_mutex);
}
/* The "channel" may have been freed. Do not access it any longer. */
if (clean_up_chan_for_suspend)
check_ready_for_suspend_event();
}
void vmbus_hvsock_device_unregister(struct vmbus_channel *channel)
{
BUG_ON(!is_hvsock_channel(channel));
/* We always get a rescind msg when a connection is closed. */
while (!READ_ONCE(channel->probe_done) || !READ_ONCE(channel->rescind))
msleep(1);
vmbus_device_unregister(channel->device_obj);
}
EXPORT_SYMBOL_GPL(vmbus_hvsock_device_unregister);
/*
* vmbus_onoffers_delivered -
* This is invoked when all offers have been delivered.
*
* Nothing to do here.
*/
static void vmbus_onoffers_delivered(
struct vmbus_channel_message_header *hdr)
{
}
/*
* vmbus_onopen_result - Open result handler.
*
* This is invoked when we received a response to our channel open request.
* Find the matching request, copy the response and signal the requesting
* thread.
*/
static void vmbus_onopen_result(struct vmbus_channel_message_header *hdr)
{
struct vmbus_channel_open_result *result;
struct vmbus_channel_msginfo *msginfo;
struct vmbus_channel_message_header *requestheader;
struct vmbus_channel_open_channel *openmsg;
unsigned long flags;
result = (struct vmbus_channel_open_result *)hdr;
trace_vmbus_onopen_result(result);
/*
* Find the open msg, copy the result and signal/unblock the wait event
*/
spin_lock_irqsave(&vmbus_connection.channelmsg_lock, flags);
list_for_each_entry(msginfo, &vmbus_connection.chn_msg_list,
msglistentry) {
requestheader =
(struct vmbus_channel_message_header *)msginfo->msg;
if (requestheader->msgtype == CHANNELMSG_OPENCHANNEL) {
openmsg =
(struct vmbus_channel_open_channel *)msginfo->msg;
if (openmsg->child_relid == result->child_relid &&
openmsg->openid == result->openid) {
memcpy(&msginfo->response.open_result,
result,
sizeof(
struct vmbus_channel_open_result));
complete(&msginfo->waitevent);
break;
}
}
}
spin_unlock_irqrestore(&vmbus_connection.channelmsg_lock, flags);
}
/*
* vmbus_ongpadl_created - GPADL created handler.
*
* This is invoked when we received a response to our gpadl create request.
* Find the matching request, copy the response and signal the requesting
* thread.
*/
static void vmbus_ongpadl_created(struct vmbus_channel_message_header *hdr)
{
struct vmbus_channel_gpadl_created *gpadlcreated;
struct vmbus_channel_msginfo *msginfo;
struct vmbus_channel_message_header *requestheader;
struct vmbus_channel_gpadl_header *gpadlheader;
unsigned long flags;
gpadlcreated = (struct vmbus_channel_gpadl_created *)hdr;
trace_vmbus_ongpadl_created(gpadlcreated);
/*
* Find the establish msg, copy the result and signal/unblock the wait
* event
*/
spin_lock_irqsave(&vmbus_connection.channelmsg_lock, flags);
list_for_each_entry(msginfo, &vmbus_connection.chn_msg_list,
msglistentry) {
requestheader =
(struct vmbus_channel_message_header *)msginfo->msg;
if (requestheader->msgtype == CHANNELMSG_GPADL_HEADER) {
gpadlheader =
(struct vmbus_channel_gpadl_header *)requestheader;
if ((gpadlcreated->child_relid ==
gpadlheader->child_relid) &&
(gpadlcreated->gpadl == gpadlheader->gpadl)) {
memcpy(&msginfo->response.gpadl_created,
gpadlcreated,
sizeof(
struct vmbus_channel_gpadl_created));
complete(&msginfo->waitevent);
break;
}
}
}
spin_unlock_irqrestore(&vmbus_connection.channelmsg_lock, flags);
}
/*
* vmbus_ongpadl_torndown - GPADL torndown handler.
*
* This is invoked when we received a response to our gpadl teardown request.
* Find the matching request, copy the response and signal the requesting
* thread.
*/
static void vmbus_ongpadl_torndown(
struct vmbus_channel_message_header *hdr)
{
struct vmbus_channel_gpadl_torndown *gpadl_torndown;
struct vmbus_channel_msginfo *msginfo;
struct vmbus_channel_message_header *requestheader;
struct vmbus_channel_gpadl_teardown *gpadl_teardown;
unsigned long flags;
gpadl_torndown = (struct vmbus_channel_gpadl_torndown *)hdr;
trace_vmbus_ongpadl_torndown(gpadl_torndown);
/*
* Find the open msg, copy the result and signal/unblock the wait event
*/
spin_lock_irqsave(&vmbus_connection.channelmsg_lock, flags);
list_for_each_entry(msginfo, &vmbus_connection.chn_msg_list,
msglistentry) {
requestheader =
(struct vmbus_channel_message_header *)msginfo->msg;
if (requestheader->msgtype == CHANNELMSG_GPADL_TEARDOWN) {
gpadl_teardown =
(struct vmbus_channel_gpadl_teardown *)requestheader;
if (gpadl_torndown->gpadl == gpadl_teardown->gpadl) {
memcpy(&msginfo->response.gpadl_torndown,
gpadl_torndown,
sizeof(
struct vmbus_channel_gpadl_torndown));
complete(&msginfo->waitevent);
break;
}
}
}
spin_unlock_irqrestore(&vmbus_connection.channelmsg_lock, flags);
}
/*
* vmbus_onversion_response - Version response handler
*
* This is invoked when we received a response to our initiate contact request.
* Find the matching request, copy the response and signal the requesting
* thread.
*/
static void vmbus_onversion_response(
struct vmbus_channel_message_header *hdr)
{
struct vmbus_channel_msginfo *msginfo;
struct vmbus_channel_message_header *requestheader;
struct vmbus_channel_version_response *version_response;
unsigned long flags;
version_response = (struct vmbus_channel_version_response *)hdr;
trace_vmbus_onversion_response(version_response);
spin_lock_irqsave(&vmbus_connection.channelmsg_lock, flags);
list_for_each_entry(msginfo, &vmbus_connection.chn_msg_list,
msglistentry) {
requestheader =
(struct vmbus_channel_message_header *)msginfo->msg;
if (requestheader->msgtype ==
CHANNELMSG_INITIATE_CONTACT) {
memcpy(&msginfo->response.version_response,
version_response,
sizeof(struct vmbus_channel_version_response));
complete(&msginfo->waitevent);
}
}
spin_unlock_irqrestore(&vmbus_connection.channelmsg_lock, flags);
}
/* Channel message dispatch table */
const struct vmbus_channel_message_table_entry
channel_message_table[CHANNELMSG_COUNT] = {
{ CHANNELMSG_INVALID, 0, NULL, 0},
{ CHANNELMSG_OFFERCHANNEL, 0, vmbus_onoffer,
sizeof(struct vmbus_channel_offer_channel)},
{ CHANNELMSG_RESCIND_CHANNELOFFER, 0, vmbus_onoffer_rescind,
sizeof(struct vmbus_channel_rescind_offer) },
{ CHANNELMSG_REQUESTOFFERS, 0, NULL, 0},
{ CHANNELMSG_ALLOFFERS_DELIVERED, 1, vmbus_onoffers_delivered, 0},
{ CHANNELMSG_OPENCHANNEL, 0, NULL, 0},
{ CHANNELMSG_OPENCHANNEL_RESULT, 1, vmbus_onopen_result,
sizeof(struct vmbus_channel_open_result)},
{ CHANNELMSG_CLOSECHANNEL, 0, NULL, 0},
{ CHANNELMSG_GPADL_HEADER, 0, NULL, 0},
{ CHANNELMSG_GPADL_BODY, 0, NULL, 0},
{ CHANNELMSG_GPADL_CREATED, 1, vmbus_ongpadl_created,
sizeof(struct vmbus_channel_gpadl_created)},
{ CHANNELMSG_GPADL_TEARDOWN, 0, NULL, 0},
{ CHANNELMSG_GPADL_TORNDOWN, 1, vmbus_ongpadl_torndown,
sizeof(struct vmbus_channel_gpadl_torndown) },
{ CHANNELMSG_RELID_RELEASED, 0, NULL, 0},
{ CHANNELMSG_INITIATE_CONTACT, 0, NULL, 0},
{ CHANNELMSG_VERSION_RESPONSE, 1, vmbus_onversion_response,
sizeof(struct vmbus_channel_version_response)},
{ CHANNELMSG_UNLOAD, 0, NULL, 0},
{ CHANNELMSG_UNLOAD_RESPONSE, 1, vmbus_unload_response, 0},
{ CHANNELMSG_18, 0, NULL, 0},
{ CHANNELMSG_19, 0, NULL, 0},
{ CHANNELMSG_20, 0, NULL, 0},
{ CHANNELMSG_TL_CONNECT_REQUEST, 0, NULL, 0},
Drivers: hv: vmbus: Introduce the CHANNELMSG_MODIFYCHANNEL message type VMBus version 4.1 and later support the CHANNELMSG_MODIFYCHANNEL(22) message type which can be used to request Hyper-V to change the vCPU that a channel will interrupt. Introduce the CHANNELMSG_MODIFYCHANNEL message type, and define the vmbus_send_modifychannel() function to send CHANNELMSG_MODIFYCHANNEL requests to the host via a hypercall. The function is then used to define a sysfs "store" operation, which allows to change the (v)CPU the channel will interrupt by using the sysfs interface. The feature can be used for load balancing or other purposes. One interesting catch here is that Hyper-V can *not* currently ACK CHANNELMSG_MODIFYCHANNEL messages with the promise that (after the ACK is sent) the channel won't send any more interrupts to the "old" CPU. The peculiarity of the CHANNELMSG_MODIFYCHANNEL messages is problematic if the user want to take a CPU offline, since we don't want to take a CPU offline (and, potentially, "lose" channel interrupts on such CPU) if the host is still processing a CHANNELMSG_MODIFYCHANNEL message associated to that CPU. It is worth mentioning, however, that we have been unable to observe the above mentioned "race": in all our tests, CHANNELMSG_MODIFYCHANNEL requests appeared *as if* they were processed synchronously by the host. Suggested-by: Michael Kelley <mikelley@microsoft.com> Signed-off-by: Andrea Parri (Microsoft) <parri.andrea@gmail.com> Link: https://lore.kernel.org/r/20200406001514.19876-11-parri.andrea@gmail.com Reviewed-by: Michael Kelley <mikelley@microsoft.com> [ wei: fix conflict in channel_mgmt.c ] Signed-off-by: Wei Liu <wei.liu@kernel.org>
2020-04-06 00:15:13 +00:00
{ CHANNELMSG_MODIFYCHANNEL, 0, NULL, 0},
{ CHANNELMSG_TL_CONNECT_RESULT, 0, NULL, 0},
};
/*
* vmbus_onmessage - Handler for channel protocol messages.
*
* This is invoked in the vmbus worker thread context.
*/
void vmbus_onmessage(struct vmbus_channel_message_header *hdr)
{
trace_vmbus_on_message(hdr);
/*
* vmbus_on_msg_dpc() makes sure the hdr->msgtype here can not go
* out of bound and the message_handler pointer can not be NULL.
*/
channel_message_table[hdr->msgtype].message_handler(hdr);
}
/*
* vmbus_request_offers - Send a request to get all our pending offers.
*/
int vmbus_request_offers(void)
{
struct vmbus_channel_message_header *msg;
struct vmbus_channel_msginfo *msginfo;
int ret;
msginfo = kmalloc(sizeof(*msginfo) +
sizeof(struct vmbus_channel_message_header),
GFP_KERNEL);
if (!msginfo)
return -ENOMEM;
msg = (struct vmbus_channel_message_header *)msginfo->msg;
msg->msgtype = CHANNELMSG_REQUESTOFFERS;
ret = vmbus_post_msg(msg, sizeof(struct vmbus_channel_message_header),
true);
trace_vmbus_request_offers(ret);
if (ret != 0) {
pr_err("Unable to request offers - %d\n", ret);
goto cleanup;
}
cleanup:
kfree(msginfo);
return ret;
}
static void invoke_sc_cb(struct vmbus_channel *primary_channel)
{
struct list_head *cur, *tmp;
struct vmbus_channel *cur_channel;
if (primary_channel->sc_creation_callback == NULL)
return;
list_for_each_safe(cur, tmp, &primary_channel->sc_list) {
cur_channel = list_entry(cur, struct vmbus_channel, sc_list);
primary_channel->sc_creation_callback(cur_channel);
}
}
void vmbus_set_sc_create_callback(struct vmbus_channel *primary_channel,
void (*sc_cr_cb)(struct vmbus_channel *new_sc))
{
primary_channel->sc_creation_callback = sc_cr_cb;
}
EXPORT_SYMBOL_GPL(vmbus_set_sc_create_callback);
bool vmbus_are_subchannels_present(struct vmbus_channel *primary)
{
bool ret;
ret = !list_empty(&primary->sc_list);
if (ret) {
/*
* Invoke the callback on sub-channel creation.
* This will present a uniform interface to the
* clients.
*/
invoke_sc_cb(primary);
}
return ret;
}
EXPORT_SYMBOL_GPL(vmbus_are_subchannels_present);
void vmbus_set_chn_rescind_callback(struct vmbus_channel *channel,
void (*chn_rescind_cb)(struct vmbus_channel *))
{
channel->chn_rescind_callback = chn_rescind_cb;
}
EXPORT_SYMBOL_GPL(vmbus_set_chn_rescind_callback);