linux/fs/orangefs/xattr.c

563 lines
15 KiB
C
Raw Normal View History

License cleanup: add SPDX GPL-2.0 license identifier to files with no license Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 14:07:57 +00:00
// SPDX-License-Identifier: GPL-2.0
/*
* (C) 2001 Clemson University and The University of Chicago
* Copyright 2018 Omnibond Systems, L.L.C.
*
* See COPYING in top-level directory.
*/
/*
* Linux VFS extended attribute operations.
*/
#include "protocol.h"
#include "orangefs-kernel.h"
#include "orangefs-bufmap.h"
#include <linux/posix_acl_xattr.h>
#include <linux/xattr.h>
#include <linux/hashtable.h>
#define SYSTEM_ORANGEFS_KEY "system.pvfs2."
#define SYSTEM_ORANGEFS_KEY_LEN 13
/*
* this function returns
* 0 if the key corresponding to name is not meant to be printed as part
* of a listxattr.
* 1 if the key corresponding to name is meant to be returned as part of
* a listxattr.
* The ones that start SYSTEM_ORANGEFS_KEY are the ones to avoid printing.
*/
static int is_reserved_key(const char *key, size_t size)
{
if (size < SYSTEM_ORANGEFS_KEY_LEN)
return 1;
return strncmp(key, SYSTEM_ORANGEFS_KEY, SYSTEM_ORANGEFS_KEY_LEN) ? 1 : 0;
}
static inline int convert_to_internal_xattr_flags(int setxattr_flags)
{
int internal_flag = 0;
if (setxattr_flags & XATTR_REPLACE) {
/* Attribute must exist! */
internal_flag = ORANGEFS_XATTR_REPLACE;
} else if (setxattr_flags & XATTR_CREATE) {
/* Attribute must not exist */
internal_flag = ORANGEFS_XATTR_CREATE;
}
return internal_flag;
}
static unsigned int xattr_key(const char *key)
{
unsigned int i = 0;
while (key)
i += *key++;
return i % 16;
}
static struct orangefs_cached_xattr *find_cached_xattr(struct inode *inode,
const char *key)
{
struct orangefs_inode_s *orangefs_inode = ORANGEFS_I(inode);
struct orangefs_cached_xattr *cx;
struct hlist_head *h;
struct hlist_node *tmp;
h = &orangefs_inode->xattr_cache[xattr_key(key)];
if (hlist_empty(h))
return NULL;
hlist_for_each_entry_safe(cx, tmp, h, node) {
/* if (!time_before(jiffies, cx->timeout)) {
hlist_del(&cx->node);
kfree(cx);
continue;
}*/
if (!strcmp(cx->key, key))
return cx;
}
return NULL;
}
/*
* Tries to get a specified key's attributes of a given
* file into a user-specified buffer. Note that the getxattr
* interface allows for the users to probe the size of an
* extended attribute by passing in a value of 0 to size.
* Thus our return value is always the size of the attribute
* unless the key does not exist for the file and/or if
* there were errors in fetching the attribute value.
*/
ssize_t orangefs_inode_getxattr(struct inode *inode, const char *name,
void *buffer, size_t size)
{
struct orangefs_inode_s *orangefs_inode = ORANGEFS_I(inode);
struct orangefs_kernel_op_s *new_op = NULL;
struct orangefs_cached_xattr *cx;
ssize_t ret = -ENOMEM;
ssize_t length = 0;
int fsuid;
int fsgid;
gossip_debug(GOSSIP_XATTR_DEBUG,
"%s: name %s, buffer_size %zd\n",
__func__, name, size);
if (S_ISLNK(inode->i_mode))
return -EOPNOTSUPP;
if (strlen(name) >= ORANGEFS_MAX_XATTR_NAMELEN)
return -EINVAL;
orangefs: fix namespace handling In orangefs_inode_getxattr(), an fsuid is written to dmesg. The kuid is converted to a userspace uid via from_kuid(current_user_ns(), [...]), but since dmesg is global, init_user_ns should be used here instead. In copy_attributes_from_inode(), op_alloc() and fill_default_sys_attrs(), upcall structures are populated with uids/gids that have been mapped into the caller's namespace. However, those upcall structures are read by another process (the userspace filesystem driver), and that process might be running in another namespace. This effectively lets any user spoof its uid and gid as seen by the userspace filesystem driver. To fix the second issue, I just construct the opcall structures with init_user_ns uids/gids and require the filesystem server to run in the init namespace. Since orangefs is full of global state anyway (as the error message in DUMP_DEVICE_ERROR explains, there can only be one userspace orangefs filesystem driver at once), that shouldn't be a problem. [ Why does orangefs even exist in the kernel if everything does upcalls into userspace? What does orangefs do that couldn't be done with the FUSE interface? If there is no good answer to those questions, I'd prefer to see orangefs kicked out of the kernel. Can that be done for something that shipped in a release? According to commit f7ab093f74bf ("Orangefs: kernel client part 1"), they even already have a FUSE daemon, and the only rational reason (apart from "but most of our users report preferring to use our kernel module instead") given for not wanting to use FUSE is one "in-the-works" feature that could probably be integated into FUSE instead. ] This patch has been compile-tested. Signed-off-by: Jann Horn <jannh@google.com> Signed-off-by: Mike Marshall <hubcap@omnibond.com>
2016-06-24 23:51:52 +00:00
fsuid = from_kuid(&init_user_ns, current_fsuid());
fsgid = from_kgid(&init_user_ns, current_fsgid());
gossip_debug(GOSSIP_XATTR_DEBUG,
"getxattr on inode %pU, name %s "
"(uid %o, gid %o)\n",
get_khandle_from_ino(inode),
name,
fsuid,
fsgid);
down_read(&orangefs_inode->xattr_sem);
cx = find_cached_xattr(inode, name);
if (cx && time_before(jiffies, cx->timeout)) {
if (cx->length == -1) {
ret = -ENODATA;
goto out_unlock;
} else {
if (size == 0) {
ret = cx->length;
goto out_unlock;
}
if (cx->length > size) {
ret = -ERANGE;
goto out_unlock;
}
memcpy(buffer, cx->val, cx->length);
memset(buffer + cx->length, 0, size - cx->length);
ret = cx->length;
goto out_unlock;
}
}
new_op = op_alloc(ORANGEFS_VFS_OP_GETXATTR);
if (!new_op)
goto out_unlock;
new_op->upcall.req.getxattr.refn = orangefs_inode->refn;
strcpy(new_op->upcall.req.getxattr.key, name);
/*
* NOTE: Although keys are meant to be NULL terminated textual
* strings, I am going to explicitly pass the length just in case
* we change this later on...
*/
new_op->upcall.req.getxattr.key_sz = strlen(name) + 1;
ret = service_operation(new_op, "orangefs_inode_getxattr",
get_interruptible_flag(inode));
if (ret != 0) {
if (ret == -ENOENT) {
ret = -ENODATA;
gossip_debug(GOSSIP_XATTR_DEBUG,
"orangefs_inode_getxattr: inode %pU key %s"
" does not exist!\n",
get_khandle_from_ino(inode),
(char *)new_op->upcall.req.getxattr.key);
cx = kmalloc(sizeof *cx, GFP_KERNEL);
if (cx) {
strcpy(cx->key, name);
cx->length = -1;
cx->timeout = jiffies +
orangefs_getattr_timeout_msecs*HZ/1000;
hash_add(orangefs_inode->xattr_cache, &cx->node,
xattr_key(cx->key));
}
}
goto out_release_op;
}
/*
* Length returned includes null terminator.
*/
length = new_op->downcall.resp.getxattr.val_sz;
/*
* Just return the length of the queried attribute.
*/
if (size == 0) {
ret = length;
goto out_release_op;
}
/*
* Check to see if key length is > provided buffer size.
*/
if (length > size) {
ret = -ERANGE;
goto out_release_op;
}
memcpy(buffer, new_op->downcall.resp.getxattr.val, length);
memset(buffer + length, 0, size - length);
gossip_debug(GOSSIP_XATTR_DEBUG,
"orangefs_inode_getxattr: inode %pU "
"key %s key_sz %d, val_len %d\n",
get_khandle_from_ino(inode),
(char *)new_op->
upcall.req.getxattr.key,
(int)new_op->
upcall.req.getxattr.key_sz,
(int)ret);
ret = length;
if (cx) {
strcpy(cx->key, name);
memcpy(cx->val, buffer, length);
cx->length = length;
cx->timeout = jiffies + HZ;
} else {
cx = kmalloc(sizeof *cx, GFP_KERNEL);
if (cx) {
strcpy(cx->key, name);
memcpy(cx->val, buffer, length);
cx->length = length;
cx->timeout = jiffies + HZ;
hash_add(orangefs_inode->xattr_cache, &cx->node,
xattr_key(cx->key));
}
}
out_release_op:
op_release(new_op);
out_unlock:
up_read(&orangefs_inode->xattr_sem);
return ret;
}
static int orangefs_inode_removexattr(struct inode *inode, const char *name,
int flags)
{
struct orangefs_inode_s *orangefs_inode = ORANGEFS_I(inode);
struct orangefs_kernel_op_s *new_op = NULL;
struct orangefs_cached_xattr *cx;
struct hlist_head *h;
struct hlist_node *tmp;
int ret = -ENOMEM;
if (strlen(name) >= ORANGEFS_MAX_XATTR_NAMELEN)
return -EINVAL;
down_write(&orangefs_inode->xattr_sem);
new_op = op_alloc(ORANGEFS_VFS_OP_REMOVEXATTR);
if (!new_op)
goto out_unlock;
new_op->upcall.req.removexattr.refn = orangefs_inode->refn;
/*
* NOTE: Although keys are meant to be NULL terminated
* textual strings, I am going to explicitly pass the
* length just in case we change this later on...
*/
strcpy(new_op->upcall.req.removexattr.key, name);
new_op->upcall.req.removexattr.key_sz = strlen(name) + 1;
gossip_debug(GOSSIP_XATTR_DEBUG,
"orangefs_inode_removexattr: key %s, key_sz %d\n",
(char *)new_op->upcall.req.removexattr.key,
(int)new_op->upcall.req.removexattr.key_sz);
ret = service_operation(new_op,
"orangefs_inode_removexattr",
get_interruptible_flag(inode));
if (ret == -ENOENT) {
/*
* Request to replace a non-existent attribute is an error.
*/
if (flags & XATTR_REPLACE)
ret = -ENODATA;
else
ret = 0;
}
gossip_debug(GOSSIP_XATTR_DEBUG,
"orangefs_inode_removexattr: returning %d\n", ret);
op_release(new_op);
h = &orangefs_inode->xattr_cache[xattr_key(name)];
hlist_for_each_entry_safe(cx, tmp, h, node) {
if (!strcmp(cx->key, name)) {
hlist_del(&cx->node);
kfree(cx);
break;
}
}
out_unlock:
up_write(&orangefs_inode->xattr_sem);
return ret;
}
/*
* Tries to set an attribute for a given key on a file.
*
* Returns a -ve number on error and 0 on success. Key is text, but value
* can be binary!
*/
int orangefs_inode_setxattr(struct inode *inode, const char *name,
const void *value, size_t size, int flags)
{
struct orangefs_inode_s *orangefs_inode = ORANGEFS_I(inode);
struct orangefs_kernel_op_s *new_op;
int internal_flag = 0;
struct orangefs_cached_xattr *cx;
struct hlist_head *h;
struct hlist_node *tmp;
int ret = -ENOMEM;
gossip_debug(GOSSIP_XATTR_DEBUG,
"%s: name %s, buffer_size %zd\n",
__func__, name, size);
if (size > ORANGEFS_MAX_XATTR_VALUELEN)
return -EINVAL;
if (strlen(name) >= ORANGEFS_MAX_XATTR_NAMELEN)
return -EINVAL;
internal_flag = convert_to_internal_xattr_flags(flags);
/* This is equivalent to a removexattr */
if (size == 0 && !value) {
gossip_debug(GOSSIP_XATTR_DEBUG,
"removing xattr (%s)\n",
name);
return orangefs_inode_removexattr(inode, name, flags);
}
gossip_debug(GOSSIP_XATTR_DEBUG,
"setxattr on inode %pU, name %s\n",
get_khandle_from_ino(inode),
name);
down_write(&orangefs_inode->xattr_sem);
new_op = op_alloc(ORANGEFS_VFS_OP_SETXATTR);
if (!new_op)
goto out_unlock;
new_op->upcall.req.setxattr.refn = orangefs_inode->refn;
new_op->upcall.req.setxattr.flags = internal_flag;
/*
* NOTE: Although keys are meant to be NULL terminated textual
* strings, I am going to explicitly pass the length just in
* case we change this later on...
*/
strcpy(new_op->upcall.req.setxattr.keyval.key, name);
new_op->upcall.req.setxattr.keyval.key_sz = strlen(name) + 1;
memcpy(new_op->upcall.req.setxattr.keyval.val, value, size);
new_op->upcall.req.setxattr.keyval.val_sz = size;
gossip_debug(GOSSIP_XATTR_DEBUG,
"orangefs_inode_setxattr: key %s, key_sz %d "
" value size %zd\n",
(char *)new_op->upcall.req.setxattr.keyval.key,
(int)new_op->upcall.req.setxattr.keyval.key_sz,
size);
ret = service_operation(new_op,
"orangefs_inode_setxattr",
get_interruptible_flag(inode));
gossip_debug(GOSSIP_XATTR_DEBUG,
"orangefs_inode_setxattr: returning %d\n",
ret);
/* when request is serviced properly, free req op struct */
op_release(new_op);
h = &orangefs_inode->xattr_cache[xattr_key(name)];
hlist_for_each_entry_safe(cx, tmp, h, node) {
if (!strcmp(cx->key, name)) {
hlist_del(&cx->node);
kfree(cx);
break;
}
}
out_unlock:
up_write(&orangefs_inode->xattr_sem);
return ret;
}
/*
* Tries to get a specified object's keys into a user-specified buffer of a
* given size. Note that like the previous instances of xattr routines, this
* also allows you to pass in a NULL pointer and 0 size to probe the size for
* subsequent memory allocations. Thus our return value is always the size of
* all the keys unless there were errors in fetching the keys!
*/
ssize_t orangefs_listxattr(struct dentry *dentry, char *buffer, size_t size)
{
struct inode *inode = dentry->d_inode;
struct orangefs_inode_s *orangefs_inode = ORANGEFS_I(inode);
struct orangefs_kernel_op_s *new_op;
__u64 token = ORANGEFS_ITERATE_START;
ssize_t ret = -ENOMEM;
ssize_t total = 0;
int count_keys = 0;
int key_size;
int i = 0;
int returned_count = 0;
if (size > 0 && !buffer) {
gossip_err("%s: bogus NULL pointers\n", __func__);
return -EINVAL;
}
down_read(&orangefs_inode->xattr_sem);
new_op = op_alloc(ORANGEFS_VFS_OP_LISTXATTR);
if (!new_op)
goto out_unlock;
if (buffer && size > 0)
memset(buffer, 0, size);
try_again:
key_size = 0;
new_op->upcall.req.listxattr.refn = orangefs_inode->refn;
new_op->upcall.req.listxattr.token = token;
new_op->upcall.req.listxattr.requested_count =
(size == 0) ? 0 : ORANGEFS_MAX_XATTR_LISTLEN;
ret = service_operation(new_op, __func__,
get_interruptible_flag(inode));
if (ret != 0)
goto done;
if (size == 0) {
/*
* This is a bit of a big upper limit, but I did not want to
* spend too much time getting this correct, since users end
* up allocating memory rather than us...
*/
total = new_op->downcall.resp.listxattr.returned_count *
ORANGEFS_MAX_XATTR_NAMELEN;
goto done;
}
returned_count = new_op->downcall.resp.listxattr.returned_count;
if (returned_count < 0 ||
returned_count > ORANGEFS_MAX_XATTR_LISTLEN) {
gossip_err("%s: impossible value for returned_count:%d:\n",
__func__,
returned_count);
ret = -EIO;
goto done;
}
/*
* Check to see how much can be fit in the buffer. Fit only whole keys.
*/
for (i = 0; i < returned_count; i++) {
if (new_op->downcall.resp.listxattr.lengths[i] < 0 ||
new_op->downcall.resp.listxattr.lengths[i] >
ORANGEFS_MAX_XATTR_NAMELEN) {
gossip_err("%s: impossible value for lengths[%d]\n",
__func__,
new_op->downcall.resp.listxattr.lengths[i]);
ret = -EIO;
goto done;
}
if (total + new_op->downcall.resp.listxattr.lengths[i] > size)
goto done;
/*
* Since many dumb programs try to setxattr() on our reserved
* xattrs this is a feeble attempt at defeating those by not
* listing them in the output of listxattr.. sigh
*/
if (is_reserved_key(new_op->downcall.resp.listxattr.key +
key_size,
new_op->downcall.resp.
listxattr.lengths[i])) {
gossip_debug(GOSSIP_XATTR_DEBUG, "Copying key %d -> %s\n",
i, new_op->downcall.resp.listxattr.key +
key_size);
memcpy(buffer + total,
new_op->downcall.resp.listxattr.key + key_size,
new_op->downcall.resp.listxattr.lengths[i]);
total += new_op->downcall.resp.listxattr.lengths[i];
count_keys++;
} else {
gossip_debug(GOSSIP_XATTR_DEBUG, "[RESERVED] key %d -> %s\n",
i, new_op->downcall.resp.listxattr.key +
key_size);
}
key_size += new_op->downcall.resp.listxattr.lengths[i];
}
/*
* Since the buffer was large enough, we might have to continue
* fetching more keys!
*/
token = new_op->downcall.resp.listxattr.token;
if (token != ORANGEFS_ITERATE_END)
goto try_again;
done:
gossip_debug(GOSSIP_XATTR_DEBUG, "%s: returning %d"
" [size of buffer %ld] (filled in %d keys)\n",
__func__,
ret ? (int)ret : (int)total,
(long)size,
count_keys);
op_release(new_op);
if (ret == 0)
ret = total;
out_unlock:
up_read(&orangefs_inode->xattr_sem);
return ret;
}
static int orangefs_xattr_set_default(const struct xattr_handler *handler,
acl: handle idmapped mounts The posix acl permission checking helpers determine whether a caller is privileged over an inode according to the acls associated with the inode. Add helpers that make it possible to handle acls on idmapped mounts. The vfs and the filesystems targeted by this first iteration make use of posix_acl_fix_xattr_from_user() and posix_acl_fix_xattr_to_user() to translate basic posix access and default permissions such as the ACL_USER and ACL_GROUP type according to the initial user namespace (or the superblock's user namespace) to and from the caller's current user namespace. Adapt these two helpers to handle idmapped mounts whereby we either map from or into the mount's user namespace depending on in which direction we're translating. Similarly, cap_convert_nscap() is used by the vfs to translate user namespace and non-user namespace aware filesystem capabilities from the superblock's user namespace to the caller's user namespace. Enable it to handle idmapped mounts by accounting for the mount's user namespace. In addition the fileystems targeted in the first iteration of this patch series make use of the posix_acl_chmod() and, posix_acl_update_mode() helpers. Both helpers perform permission checks on the target inode. Let them handle idmapped mounts. These two helpers are called when posix acls are set by the respective filesystems to handle this case we extend the ->set() method to take an additional user namespace argument to pass the mount's user namespace down. Link: https://lore.kernel.org/r/20210121131959.646623-9-christian.brauner@ubuntu.com Cc: Christoph Hellwig <hch@lst.de> Cc: David Howells <dhowells@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: linux-fsdevel@vger.kernel.org Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
2021-01-21 13:19:27 +00:00
struct user_namespace *mnt_userns,
struct dentry *unused,
struct inode *inode,
const char *name,
const void *buffer,
size_t size,
int flags)
{
return orangefs_inode_setxattr(inode, name, buffer, size, flags);
}
static int orangefs_xattr_get_default(const struct xattr_handler *handler,
struct dentry *unused,
struct inode *inode,
const char *name,
void *buffer,
size_t size)
{
return orangefs_inode_getxattr(inode, name, buffer, size);
}
static const struct xattr_handler orangefs_xattr_default_handler = {
.prefix = "", /* match any name => handlers called with full name */
.get = orangefs_xattr_get_default,
.set = orangefs_xattr_set_default,
};
const struct xattr_handler *orangefs_xattr_handlers[] = {
&posix_acl_access_xattr_handler,
&posix_acl_default_xattr_handler,
&orangefs_xattr_default_handler,
NULL
};