Minki/linux
1
0
Fork 1
mirror of https://github.com/torvalds/linux.git synced 2024-11-01 01:31:44 +00:00
Code Issues Packages Projects Releases Wiki Activity
d983f93328
linux/arch/blackfin/kernel/asm-offsets.c

159 lines
6.7 KiB
C
Raw Normal View History

blackfin architecture This adds support for the Analog Devices Blackfin processor architecture, and currently supports the BF533, BF532, BF531, BF537, BF536, BF534, and BF561 (Dual Core) devices, with a variety of development platforms including those avaliable from Analog Devices (BF533-EZKit, BF533-STAMP, BF537-STAMP, BF561-EZKIT), and Bluetechnix! Tinyboards. The Blackfin architecture was jointly developed by Intel and Analog Devices Inc. (ADI) as the Micro Signal Architecture (MSA) core and introduced it in December of 2000. Since then ADI has put this core into its Blackfin processor family of devices. The Blackfin core has the advantages of a clean, orthogonal,RISC-like microprocessor instruction set. It combines a dual-MAC (Multiply/Accumulate), state-of-the-art signal processing engine and single-instruction, multiple-data (SIMD) multimedia capabilities into a single instruction-set architecture. The Blackfin architecture, including the instruction set, is described by the ADSP-BF53x/BF56x Blackfin Processor Programming Reference http://blackfin.uclinux.org/gf/download/frsrelease/29/2549/Blackfin_PRM.pdf The Blackfin processor is already supported by major releases of gcc, and there are binary and source rpms/tarballs for many architectures at: http://blackfin.uclinux.org/gf/project/toolchain/frs There is complete documentation, including "getting started" guides available at: http://docs.blackfin.uclinux.org/ which provides links to the sources and patches you will need in order to set up a cross-compiling environment for bfin-linux-uclibc This patch, as well as the other patches (toolchain, distribution, uClibc) are actively supported by Analog Devices Inc, at: http://blackfin.uclinux.org/ We have tested this on LTP, and our test plan (including pass/fails) can be found at: http://docs.blackfin.uclinux.org/doku.php?id=testing_the_linux_kernel [m.kozlowski@tuxland.pl: balance parenthesis in blackfin header files] Signed-off-by: Bryan Wu <bryan.wu@analog.com> Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl> Signed-off-by: Aubrey Li <aubrey.li@analog.com> Signed-off-by: Jie Zhang <jie.zhang@analog.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-06 21:50:22 +00:00
/*
Blackfin: mass clean up of copyright/licensing info Bill Gatliff & David Brownell pointed out we were missing some copyrights, and licensing terms in some of the files in ./arch/blackfin, so this fixes things, and cleans them up. It also removes: - verbose GPL text(refer to the top level ./COPYING file) - file names (you are looking at the file) - bug url (it's in the ./MAINTAINERS file) - "or later" on GPL-2, when we did not have that right It also allows some Blackfin-specific assembly files to be under a BSD like license (for people to use them outside of Linux). Signed-off-by: Robin Getz <robin.getz@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-24 14:11:24 +00:00
* generate definitions needed by assembly language modules
blackfin architecture This adds support for the Analog Devices Blackfin processor architecture, and currently supports the BF533, BF532, BF531, BF537, BF536, BF534, and BF561 (Dual Core) devices, with a variety of development platforms including those avaliable from Analog Devices (BF533-EZKit, BF533-STAMP, BF537-STAMP, BF561-EZKIT), and Bluetechnix! Tinyboards. The Blackfin architecture was jointly developed by Intel and Analog Devices Inc. (ADI) as the Micro Signal Architecture (MSA) core and introduced it in December of 2000. Since then ADI has put this core into its Blackfin processor family of devices. The Blackfin core has the advantages of a clean, orthogonal,RISC-like microprocessor instruction set. It combines a dual-MAC (Multiply/Accumulate), state-of-the-art signal processing engine and single-instruction, multiple-data (SIMD) multimedia capabilities into a single instruction-set architecture. The Blackfin architecture, including the instruction set, is described by the ADSP-BF53x/BF56x Blackfin Processor Programming Reference http://blackfin.uclinux.org/gf/download/frsrelease/29/2549/Blackfin_PRM.pdf The Blackfin processor is already supported by major releases of gcc, and there are binary and source rpms/tarballs for many architectures at: http://blackfin.uclinux.org/gf/project/toolchain/frs There is complete documentation, including "getting started" guides available at: http://docs.blackfin.uclinux.org/ which provides links to the sources and patches you will need in order to set up a cross-compiling environment for bfin-linux-uclibc This patch, as well as the other patches (toolchain, distribution, uClibc) are actively supported by Analog Devices Inc, at: http://blackfin.uclinux.org/ We have tested this on LTP, and our test plan (including pass/fails) can be found at: http://docs.blackfin.uclinux.org/doku.php?id=testing_the_linux_kernel [m.kozlowski@tuxland.pl: balance parenthesis in blackfin header files] Signed-off-by: Bryan Wu <bryan.wu@analog.com> Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl> Signed-off-by: Aubrey Li <aubrey.li@analog.com> Signed-off-by: Jie Zhang <jie.zhang@analog.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-06 21:50:22 +00:00
*
Blackfin: mass clean up of copyright/licensing info Bill Gatliff & David Brownell pointed out we were missing some copyrights, and licensing terms in some of the files in ./arch/blackfin, so this fixes things, and cleans them up. It also removes: - verbose GPL text(refer to the top level ./COPYING file) - file names (you are looking at the file) - bug url (it's in the ./MAINTAINERS file) - "or later" on GPL-2, when we did not have that right It also allows some Blackfin-specific assembly files to be under a BSD like license (for people to use them outside of Linux). Signed-off-by: Robin Getz <robin.getz@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-24 14:11:24 +00:00
* Copyright 2004-2009 Analog Devices Inc.
blackfin architecture This adds support for the Analog Devices Blackfin processor architecture, and currently supports the BF533, BF532, BF531, BF537, BF536, BF534, and BF561 (Dual Core) devices, with a variety of development platforms including those avaliable from Analog Devices (BF533-EZKit, BF533-STAMP, BF537-STAMP, BF561-EZKIT), and Bluetechnix! Tinyboards. The Blackfin architecture was jointly developed by Intel and Analog Devices Inc. (ADI) as the Micro Signal Architecture (MSA) core and introduced it in December of 2000. Since then ADI has put this core into its Blackfin processor family of devices. The Blackfin core has the advantages of a clean, orthogonal,RISC-like microprocessor instruction set. It combines a dual-MAC (Multiply/Accumulate), state-of-the-art signal processing engine and single-instruction, multiple-data (SIMD) multimedia capabilities into a single instruction-set architecture. The Blackfin architecture, including the instruction set, is described by the ADSP-BF53x/BF56x Blackfin Processor Programming Reference http://blackfin.uclinux.org/gf/download/frsrelease/29/2549/Blackfin_PRM.pdf The Blackfin processor is already supported by major releases of gcc, and there are binary and source rpms/tarballs for many architectures at: http://blackfin.uclinux.org/gf/project/toolchain/frs There is complete documentation, including "getting started" guides available at: http://docs.blackfin.uclinux.org/ which provides links to the sources and patches you will need in order to set up a cross-compiling environment for bfin-linux-uclibc This patch, as well as the other patches (toolchain, distribution, uClibc) are actively supported by Analog Devices Inc, at: http://blackfin.uclinux.org/ We have tested this on LTP, and our test plan (including pass/fails) can be found at: http://docs.blackfin.uclinux.org/doku.php?id=testing_the_linux_kernel [m.kozlowski@tuxland.pl: balance parenthesis in blackfin header files] Signed-off-by: Bryan Wu <bryan.wu@analog.com> Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl> Signed-off-by: Aubrey Li <aubrey.li@analog.com> Signed-off-by: Jie Zhang <jie.zhang@analog.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-06 21:50:22 +00:00
*
Blackfin: mass clean up of copyright/licensing info Bill Gatliff & David Brownell pointed out we were missing some copyrights, and licensing terms in some of the files in ./arch/blackfin, so this fixes things, and cleans them up. It also removes: - verbose GPL text(refer to the top level ./COPYING file) - file names (you are looking at the file) - bug url (it's in the ./MAINTAINERS file) - "or later" on GPL-2, when we did not have that right It also allows some Blackfin-specific assembly files to be under a BSD like license (for people to use them outside of Linux). Signed-off-by: Robin Getz <robin.getz@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-09-24 14:11:24 +00:00
* Licensed under the GPL-2 or later
blackfin architecture This adds support for the Analog Devices Blackfin processor architecture, and currently supports the BF533, BF532, BF531, BF537, BF536, BF534, and BF561 (Dual Core) devices, with a variety of development platforms including those avaliable from Analog Devices (BF533-EZKit, BF533-STAMP, BF537-STAMP, BF561-EZKIT), and Bluetechnix! Tinyboards. The Blackfin architecture was jointly developed by Intel and Analog Devices Inc. (ADI) as the Micro Signal Architecture (MSA) core and introduced it in December of 2000. Since then ADI has put this core into its Blackfin processor family of devices. The Blackfin core has the advantages of a clean, orthogonal,RISC-like microprocessor instruction set. It combines a dual-MAC (Multiply/Accumulate), state-of-the-art signal processing engine and single-instruction, multiple-data (SIMD) multimedia capabilities into a single instruction-set architecture. The Blackfin architecture, including the instruction set, is described by the ADSP-BF53x/BF56x Blackfin Processor Programming Reference http://blackfin.uclinux.org/gf/download/frsrelease/29/2549/Blackfin_PRM.pdf The Blackfin processor is already supported by major releases of gcc, and there are binary and source rpms/tarballs for many architectures at: http://blackfin.uclinux.org/gf/project/toolchain/frs There is complete documentation, including "getting started" guides available at: http://docs.blackfin.uclinux.org/ which provides links to the sources and patches you will need in order to set up a cross-compiling environment for bfin-linux-uclibc This patch, as well as the other patches (toolchain, distribution, uClibc) are actively supported by Analog Devices Inc, at: http://blackfin.uclinux.org/ We have tested this on LTP, and our test plan (including pass/fails) can be found at: http://docs.blackfin.uclinux.org/doku.php?id=testing_the_linux_kernel [m.kozlowski@tuxland.pl: balance parenthesis in blackfin header files] Signed-off-by: Bryan Wu <bryan.wu@analog.com> Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl> Signed-off-by: Aubrey Li <aubrey.li@analog.com> Signed-off-by: Jie Zhang <jie.zhang@analog.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-06 21:50:22 +00:00
*/
#include <linux/stddef.h>
#include <linux/sched.h>
#include <linux/kernel_stat.h>
#include <linux/ptrace.h>
#include <linux/hardirq.h>
Blackfin arch: cleanup warnings from checkpatch -- no functional changes Signed-off-by: Mike Frysinger <michael.frysinger@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com>
2007-07-12 14:58:21 +00:00
#include <linux/irq.h>
#include <linux/thread_info.h>
blackfin: use kbuild.h instead of defining macros in asm-macros.c Signed-off-by: Christoph Lameter <clameter@sgi.com> Cc: Bryan Wu <bryan.wu@analog.com> Cc: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-29 08:04:03 +00:00
#include <linux/kbuild.h>
Disintegrate asm/system.h for Blackfin [ver #2] Disintegrate asm/system.h for Blackfin. Signed-off-by: David Howells <dhowells@redhat.com> cc: uclinux-dist-devel@blackfin.uclinux.org Signed-off-by: Bob Liu <lliubbo@gmail.com>
2012-03-12 23:36:56 +00:00
#include <asm/pda.h>
blackfin architecture This adds support for the Analog Devices Blackfin processor architecture, and currently supports the BF533, BF532, BF531, BF537, BF536, BF534, and BF561 (Dual Core) devices, with a variety of development platforms including those avaliable from Analog Devices (BF533-EZKit, BF533-STAMP, BF537-STAMP, BF561-EZKIT), and Bluetechnix! Tinyboards. The Blackfin architecture was jointly developed by Intel and Analog Devices Inc. (ADI) as the Micro Signal Architecture (MSA) core and introduced it in December of 2000. Since then ADI has put this core into its Blackfin processor family of devices. The Blackfin core has the advantages of a clean, orthogonal,RISC-like microprocessor instruction set. It combines a dual-MAC (Multiply/Accumulate), state-of-the-art signal processing engine and single-instruction, multiple-data (SIMD) multimedia capabilities into a single instruction-set architecture. The Blackfin architecture, including the instruction set, is described by the ADSP-BF53x/BF56x Blackfin Processor Programming Reference http://blackfin.uclinux.org/gf/download/frsrelease/29/2549/Blackfin_PRM.pdf The Blackfin processor is already supported by major releases of gcc, and there are binary and source rpms/tarballs for many architectures at: http://blackfin.uclinux.org/gf/project/toolchain/frs There is complete documentation, including "getting started" guides available at: http://docs.blackfin.uclinux.org/ which provides links to the sources and patches you will need in order to set up a cross-compiling environment for bfin-linux-uclibc This patch, as well as the other patches (toolchain, distribution, uClibc) are actively supported by Analog Devices Inc, at: http://blackfin.uclinux.org/ We have tested this on LTP, and our test plan (including pass/fails) can be found at: http://docs.blackfin.uclinux.org/doku.php?id=testing_the_linux_kernel [m.kozlowski@tuxland.pl: balance parenthesis in blackfin header files] Signed-off-by: Bryan Wu <bryan.wu@analog.com> Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl> Signed-off-by: Aubrey Li <aubrey.li@analog.com> Signed-off-by: Jie Zhang <jie.zhang@analog.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-06 21:50:22 +00:00
int main(void)
{
/* offsets into the task struct */
DEFINE(TASK_STATE, offsetof(struct task_struct, state));
DEFINE(TASK_FLAGS, offsetof(struct task_struct, flags));
DEFINE(TASK_PTRACE, offsetof(struct task_struct, ptrace));
DEFINE(TASK_BLOCKED, offsetof(struct task_struct, blocked));
DEFINE(TASK_THREAD, offsetof(struct task_struct, thread));
wrap access to thread_info Recently a few direct accesses to the thread_info in the task structure snuck back, so this wraps them with the appropriate wrapper. Signed-off-by: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-09 09:35:16 +00:00
DEFINE(TASK_THREAD_INFO, offsetof(struct task_struct, stack));
blackfin architecture This adds support for the Analog Devices Blackfin processor architecture, and currently supports the BF533, BF532, BF531, BF537, BF536, BF534, and BF561 (Dual Core) devices, with a variety of development platforms including those avaliable from Analog Devices (BF533-EZKit, BF533-STAMP, BF537-STAMP, BF561-EZKIT), and Bluetechnix! Tinyboards. The Blackfin architecture was jointly developed by Intel and Analog Devices Inc. (ADI) as the Micro Signal Architecture (MSA) core and introduced it in December of 2000. Since then ADI has put this core into its Blackfin processor family of devices. The Blackfin core has the advantages of a clean, orthogonal,RISC-like microprocessor instruction set. It combines a dual-MAC (Multiply/Accumulate), state-of-the-art signal processing engine and single-instruction, multiple-data (SIMD) multimedia capabilities into a single instruction-set architecture. The Blackfin architecture, including the instruction set, is described by the ADSP-BF53x/BF56x Blackfin Processor Programming Reference http://blackfin.uclinux.org/gf/download/frsrelease/29/2549/Blackfin_PRM.pdf The Blackfin processor is already supported by major releases of gcc, and there are binary and source rpms/tarballs for many architectures at: http://blackfin.uclinux.org/gf/project/toolchain/frs There is complete documentation, including "getting started" guides available at: http://docs.blackfin.uclinux.org/ which provides links to the sources and patches you will need in order to set up a cross-compiling environment for bfin-linux-uclibc This patch, as well as the other patches (toolchain, distribution, uClibc) are actively supported by Analog Devices Inc, at: http://blackfin.uclinux.org/ We have tested this on LTP, and our test plan (including pass/fails) can be found at: http://docs.blackfin.uclinux.org/doku.php?id=testing_the_linux_kernel [m.kozlowski@tuxland.pl: balance parenthesis in blackfin header files] Signed-off-by: Bryan Wu <bryan.wu@analog.com> Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl> Signed-off-by: Aubrey Li <aubrey.li@analog.com> Signed-off-by: Jie Zhang <jie.zhang@analog.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-06 21:50:22 +00:00
DEFINE(TASK_MM, offsetof(struct task_struct, mm));
DEFINE(TASK_ACTIVE_MM, offsetof(struct task_struct, active_mm));
DEFINE(TASK_SIGPENDING, offsetof(struct task_struct, pending));
/* offsets into the irq_cpustat_t struct */
DEFINE(CPUSTAT_SOFTIRQ_PENDING,
offsetof(irq_cpustat_t, __softirq_pending));
/* offsets into the thread struct */
DEFINE(THREAD_KSP, offsetof(struct thread_struct, ksp));
DEFINE(THREAD_USP, offsetof(struct thread_struct, usp));
Blackfin arch: SMP supporting patchset: Blackfin kernel and memory management code Blackfin dual core BF561 processor can support SMP like features. https://docs.blackfin.uclinux.org/doku.php?id=linux-kernel:smp-like In this patch, we provide SMP extend to Blackfin kernel and memory management code Singed-off-by: Graf Yang <graf.yang@analog.com> Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-11-18 09:48:22 +00:00
DEFINE(THREAD_SR, offsetof(struct thread_struct, seqstat));
DEFINE(PT_SR, offsetof(struct thread_struct, seqstat));
DEFINE(THREAD_ESP0, offsetof(struct thread_struct, esp0));
blackfin architecture This adds support for the Analog Devices Blackfin processor architecture, and currently supports the BF533, BF532, BF531, BF537, BF536, BF534, and BF561 (Dual Core) devices, with a variety of development platforms including those avaliable from Analog Devices (BF533-EZKit, BF533-STAMP, BF537-STAMP, BF561-EZKIT), and Bluetechnix! Tinyboards. The Blackfin architecture was jointly developed by Intel and Analog Devices Inc. (ADI) as the Micro Signal Architecture (MSA) core and introduced it in December of 2000. Since then ADI has put this core into its Blackfin processor family of devices. The Blackfin core has the advantages of a clean, orthogonal,RISC-like microprocessor instruction set. It combines a dual-MAC (Multiply/Accumulate), state-of-the-art signal processing engine and single-instruction, multiple-data (SIMD) multimedia capabilities into a single instruction-set architecture. The Blackfin architecture, including the instruction set, is described by the ADSP-BF53x/BF56x Blackfin Processor Programming Reference http://blackfin.uclinux.org/gf/download/frsrelease/29/2549/Blackfin_PRM.pdf The Blackfin processor is already supported by major releases of gcc, and there are binary and source rpms/tarballs for many architectures at: http://blackfin.uclinux.org/gf/project/toolchain/frs There is complete documentation, including "getting started" guides available at: http://docs.blackfin.uclinux.org/ which provides links to the sources and patches you will need in order to set up a cross-compiling environment for bfin-linux-uclibc This patch, as well as the other patches (toolchain, distribution, uClibc) are actively supported by Analog Devices Inc, at: http://blackfin.uclinux.org/ We have tested this on LTP, and our test plan (including pass/fails) can be found at: http://docs.blackfin.uclinux.org/doku.php?id=testing_the_linux_kernel [m.kozlowski@tuxland.pl: balance parenthesis in blackfin header files] Signed-off-by: Bryan Wu <bryan.wu@analog.com> Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl> Signed-off-by: Aubrey Li <aubrey.li@analog.com> Signed-off-by: Jie Zhang <jie.zhang@analog.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-06 21:50:22 +00:00
DEFINE(THREAD_PC, offsetof(struct thread_struct, pc));
DEFINE(KERNEL_STACK_SIZE, THREAD_SIZE);
/* offsets into the pt_regs */
Blackfin arch: ptrace - make sure PT_ORIG_R0 and PT_ORIG_P0 offsets are declared Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-10-09 07:22:56 +00:00
DEFINE(PT_ORIG_R0, offsetof(struct pt_regs, orig_r0));
blackfin architecture This adds support for the Analog Devices Blackfin processor architecture, and currently supports the BF533, BF532, BF531, BF537, BF536, BF534, and BF561 (Dual Core) devices, with a variety of development platforms including those avaliable from Analog Devices (BF533-EZKit, BF533-STAMP, BF537-STAMP, BF561-EZKIT), and Bluetechnix! Tinyboards. The Blackfin architecture was jointly developed by Intel and Analog Devices Inc. (ADI) as the Micro Signal Architecture (MSA) core and introduced it in December of 2000. Since then ADI has put this core into its Blackfin processor family of devices. The Blackfin core has the advantages of a clean, orthogonal,RISC-like microprocessor instruction set. It combines a dual-MAC (Multiply/Accumulate), state-of-the-art signal processing engine and single-instruction, multiple-data (SIMD) multimedia capabilities into a single instruction-set architecture. The Blackfin architecture, including the instruction set, is described by the ADSP-BF53x/BF56x Blackfin Processor Programming Reference http://blackfin.uclinux.org/gf/download/frsrelease/29/2549/Blackfin_PRM.pdf The Blackfin processor is already supported by major releases of gcc, and there are binary and source rpms/tarballs for many architectures at: http://blackfin.uclinux.org/gf/project/toolchain/frs There is complete documentation, including "getting started" guides available at: http://docs.blackfin.uclinux.org/ which provides links to the sources and patches you will need in order to set up a cross-compiling environment for bfin-linux-uclibc This patch, as well as the other patches (toolchain, distribution, uClibc) are actively supported by Analog Devices Inc, at: http://blackfin.uclinux.org/ We have tested this on LTP, and our test plan (including pass/fails) can be found at: http://docs.blackfin.uclinux.org/doku.php?id=testing_the_linux_kernel [m.kozlowski@tuxland.pl: balance parenthesis in blackfin header files] Signed-off-by: Bryan Wu <bryan.wu@analog.com> Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl> Signed-off-by: Aubrey Li <aubrey.li@analog.com> Signed-off-by: Jie Zhang <jie.zhang@analog.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-06 21:50:22 +00:00
DEFINE(PT_ORIG_P0, offsetof(struct pt_regs, orig_p0));
DEFINE(PT_ORIG_PC, offsetof(struct pt_regs, orig_pc));
DEFINE(PT_R0, offsetof(struct pt_regs, r0));
DEFINE(PT_R1, offsetof(struct pt_regs, r1));
DEFINE(PT_R2, offsetof(struct pt_regs, r2));
DEFINE(PT_R3, offsetof(struct pt_regs, r3));
DEFINE(PT_R4, offsetof(struct pt_regs, r4));
DEFINE(PT_R5, offsetof(struct pt_regs, r5));
DEFINE(PT_R6, offsetof(struct pt_regs, r6));
DEFINE(PT_R7, offsetof(struct pt_regs, r7));
DEFINE(PT_P0, offsetof(struct pt_regs, p0));
DEFINE(PT_P1, offsetof(struct pt_regs, p1));
DEFINE(PT_P2, offsetof(struct pt_regs, p2));
DEFINE(PT_P3, offsetof(struct pt_regs, p3));
DEFINE(PT_P4, offsetof(struct pt_regs, p4));
DEFINE(PT_P5, offsetof(struct pt_regs, p5));
DEFINE(PT_FP, offsetof(struct pt_regs, fp));
DEFINE(PT_USP, offsetof(struct pt_regs, usp));
DEFINE(PT_I0, offsetof(struct pt_regs, i0));
DEFINE(PT_I1, offsetof(struct pt_regs, i1));
DEFINE(PT_I2, offsetof(struct pt_regs, i2));
DEFINE(PT_I3, offsetof(struct pt_regs, i3));
DEFINE(PT_M0, offsetof(struct pt_regs, m0));
DEFINE(PT_M1, offsetof(struct pt_regs, m1));
DEFINE(PT_M2, offsetof(struct pt_regs, m2));
DEFINE(PT_M3, offsetof(struct pt_regs, m3));
DEFINE(PT_L0, offsetof(struct pt_regs, l0));
DEFINE(PT_L1, offsetof(struct pt_regs, l1));
DEFINE(PT_L2, offsetof(struct pt_regs, l2));
DEFINE(PT_L3, offsetof(struct pt_regs, l3));
DEFINE(PT_B0, offsetof(struct pt_regs, b0));
DEFINE(PT_B1, offsetof(struct pt_regs, b1));
DEFINE(PT_B2, offsetof(struct pt_regs, b2));
DEFINE(PT_B3, offsetof(struct pt_regs, b3));
DEFINE(PT_A0X, offsetof(struct pt_regs, a0x));
DEFINE(PT_A0W, offsetof(struct pt_regs, a0w));
DEFINE(PT_A1X, offsetof(struct pt_regs, a1x));
DEFINE(PT_A1W, offsetof(struct pt_regs, a1w));
DEFINE(PT_LC0, offsetof(struct pt_regs, lc0));
DEFINE(PT_LC1, offsetof(struct pt_regs, lc1));
DEFINE(PT_LT0, offsetof(struct pt_regs, lt0));
DEFINE(PT_LT1, offsetof(struct pt_regs, lt1));
DEFINE(PT_LB0, offsetof(struct pt_regs, lb0));
DEFINE(PT_LB1, offsetof(struct pt_regs, lb1));
DEFINE(PT_ASTAT, offsetof(struct pt_regs, astat));
DEFINE(PT_RESERVED, offsetof(struct pt_regs, reserved));
DEFINE(PT_RETS, offsetof(struct pt_regs, rets));
DEFINE(PT_PC, offsetof(struct pt_regs, pc));
DEFINE(PT_RETX, offsetof(struct pt_regs, retx));
DEFINE(PT_RETN, offsetof(struct pt_regs, retn));
DEFINE(PT_RETE, offsetof(struct pt_regs, rete));
DEFINE(PT_SEQSTAT, offsetof(struct pt_regs, seqstat));
DEFINE(PT_SYSCFG, offsetof(struct pt_regs, syscfg));
DEFINE(PT_IPEND, offsetof(struct pt_regs, ipend));
DEFINE(SIZEOF_PTREGS, sizeof(struct pt_regs));
DEFINE(PT_TEXT_ADDR, sizeof(struct pt_regs)); /* Needed by gdb */
DEFINE(PT_TEXT_END_ADDR, 4 + sizeof(struct pt_regs));/* Needed by gdb */
DEFINE(PT_DATA_ADDR, 8 + sizeof(struct pt_regs)); /* Needed by gdb */
DEFINE(PT_FDPIC_EXEC, 12 + sizeof(struct pt_regs)); /* Needed by gdb */
DEFINE(PT_FDPIC_INTERP, 16 + sizeof(struct pt_regs));/* Needed by gdb */
/* signal defines */
DEFINE(SIGSEGV, SIGSEGV);
DEFINE(SIGTRAP, SIGTRAP);
Blackfin arch: SMP supporting patchset: Blackfin kernel and memory management code Blackfin dual core BF561 processor can support SMP like features. https://docs.blackfin.uclinux.org/doku.php?id=linux-kernel:smp-like In this patch, we provide SMP extend to Blackfin kernel and memory management code Singed-off-by: Graf Yang <graf.yang@analog.com> Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-11-18 09:48:22 +00:00
/* PDA management (in L1 scratchpad) */
DEFINE(PDA_SYSCFG, offsetof(struct blackfin_pda, syscfg));
#ifdef CONFIG_SMP
DEFINE(PDA_IRQFLAGS, offsetof(struct blackfin_pda, imask));
#endif
DEFINE(PDA_IPDT, offsetof(struct blackfin_pda, ipdt));
DEFINE(PDA_IPDT_SWAPCOUNT, offsetof(struct blackfin_pda, ipdt_swapcount));
DEFINE(PDA_DPDT, offsetof(struct blackfin_pda, dpdt));
DEFINE(PDA_DPDT_SWAPCOUNT, offsetof(struct blackfin_pda, dpdt_swapcount));
DEFINE(PDA_EXIPTR, offsetof(struct blackfin_pda, ex_iptr));
DEFINE(PDA_EXOPTR, offsetof(struct blackfin_pda, ex_optr));
DEFINE(PDA_EXBUF, offsetof(struct blackfin_pda, ex_buf));
DEFINE(PDA_EXIMASK, offsetof(struct blackfin_pda, ex_imask));
DEFINE(PDA_EXSTACK, offsetof(struct blackfin_pda, ex_stack));
Blackfin: make EVT3->EVT5 lowering more robust wrt IPEND[4] We handle many exceptions at EVT5 (hardware error level) so that we can catch exceptions in our exception handling code. Today - if the global interrupt enable bit (IPEND[4]) is set (interrupts disabled) our trap handling code goes into a infinite loop, since we need interrupts to be on to defer things to EVT5. Normal kernel code should not trigger this for any reason as IPEND[4] gets cleared early (when doing an interrupt context save) and the kernel stack there should be sane (or something much worse is happening in the system). But there have been a few times where this has happened, so this change makes sure we dump a proper crash message even when things have gone south. Signed-off-by: Robin Getz <robin.getz@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-06-22 02:02:16 +00:00
DEFINE(PDA_EXIPEND, offsetof(struct blackfin_pda, ex_ipend));
Blackfin arch: SMP supporting patchset: Blackfin kernel and memory management code Blackfin dual core BF561 processor can support SMP like features. https://docs.blackfin.uclinux.org/doku.php?id=linux-kernel:smp-like In this patch, we provide SMP extend to Blackfin kernel and memory management code Singed-off-by: Graf Yang <graf.yang@analog.com> Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-11-18 09:48:22 +00:00
#ifdef ANOMALY_05000261
DEFINE(PDA_LFRETX, offsetof(struct blackfin_pda, last_cplb_fault_retx));
#endif
DEFINE(PDA_DCPLB, offsetof(struct blackfin_pda, dcplb_fault_addr));
DEFINE(PDA_ICPLB, offsetof(struct blackfin_pda, icplb_fault_addr));
DEFINE(PDA_RETX, offsetof(struct blackfin_pda, retx));
DEFINE(PDA_SEQSTAT, offsetof(struct blackfin_pda, seqstat));
Blackfin: improve double fault debug handling Since the hardware only provides reporting for the last exception handled, and the values are valid only when executing the exception handler, we need to save the context for reporting at a later point. While we do this for one exception, it doesn't work properly when handling a second one as the original exception is clobbered by the double fault. So when double fault debugging is enabled, create a dedicated shadow of these values and save/restore out of there. Now the crash report properly displays the first exception as well as the second one. Signed-off-by: Graf Yang <graf.yang@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-07-22 11:56:24 +00:00
#ifdef CONFIG_DEBUG_DOUBLEFAULT
DEFINE(PDA_DF_DCPLB, offsetof(struct blackfin_pda, dcplb_doublefault_addr));
DEFINE(PDA_DF_ICPLB, offsetof(struct blackfin_pda, icplb_doublefault_addr));
DEFINE(PDA_DF_SEQSTAT, offsetof(struct blackfin_pda, seqstat_doublefault));
DEFINE(PDA_DF_RETX, offsetof(struct blackfin_pda, retx_doublefault));
#endif
Blackfin: optimize double fault boot checking This moves the double fault data used at boot time into a single struct which can then easily be addressed with indexed loads rather than having to explicitly load multiple addresses. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-05-30 03:12:51 +00:00
/* PDA initial management */
DEFINE(PDA_INIT_RETX, offsetof(struct blackfin_initial_pda, retx));
#ifdef CONFIG_DEBUG_DOUBLEFAULT
DEFINE(PDA_INIT_DF_DCPLB, offsetof(struct blackfin_initial_pda, dcplb_doublefault_addr));
DEFINE(PDA_INIT_DF_ICPLB, offsetof(struct blackfin_initial_pda, icplb_doublefault_addr));
DEFINE(PDA_INIT_DF_SEQSTAT, offsetof(struct blackfin_initial_pda, seqstat_doublefault));
DEFINE(PDA_INIT_DF_RETX, offsetof(struct blackfin_initial_pda, retx_doublefault));
#endif
Blackfin arch: SMP supporting patchset: Blackfin kernel and memory management code Blackfin dual core BF561 processor can support SMP like features. https://docs.blackfin.uclinux.org/doku.php?id=linux-kernel:smp-like In this patch, we provide SMP extend to Blackfin kernel and memory management code Singed-off-by: Graf Yang <graf.yang@analog.com> Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org>
2008-11-18 09:48:22 +00:00
#ifdef CONFIG_SMP
/* Inter-core lock (in L2 SRAM) */
DEFINE(SIZEOF_CORELOCK, sizeof(struct corelock_slot));
#endif
blackfin architecture This adds support for the Analog Devices Blackfin processor architecture, and currently supports the BF533, BF532, BF531, BF537, BF536, BF534, and BF561 (Dual Core) devices, with a variety of development platforms including those avaliable from Analog Devices (BF533-EZKit, BF533-STAMP, BF537-STAMP, BF561-EZKIT), and Bluetechnix! Tinyboards. The Blackfin architecture was jointly developed by Intel and Analog Devices Inc. (ADI) as the Micro Signal Architecture (MSA) core and introduced it in December of 2000. Since then ADI has put this core into its Blackfin processor family of devices. The Blackfin core has the advantages of a clean, orthogonal,RISC-like microprocessor instruction set. It combines a dual-MAC (Multiply/Accumulate), state-of-the-art signal processing engine and single-instruction, multiple-data (SIMD) multimedia capabilities into a single instruction-set architecture. The Blackfin architecture, including the instruction set, is described by the ADSP-BF53x/BF56x Blackfin Processor Programming Reference http://blackfin.uclinux.org/gf/download/frsrelease/29/2549/Blackfin_PRM.pdf The Blackfin processor is already supported by major releases of gcc, and there are binary and source rpms/tarballs for many architectures at: http://blackfin.uclinux.org/gf/project/toolchain/frs There is complete documentation, including "getting started" guides available at: http://docs.blackfin.uclinux.org/ which provides links to the sources and patches you will need in order to set up a cross-compiling environment for bfin-linux-uclibc This patch, as well as the other patches (toolchain, distribution, uClibc) are actively supported by Analog Devices Inc, at: http://blackfin.uclinux.org/ We have tested this on LTP, and our test plan (including pass/fails) can be found at: http://docs.blackfin.uclinux.org/doku.php?id=testing_the_linux_kernel [m.kozlowski@tuxland.pl: balance parenthesis in blackfin header files] Signed-off-by: Bryan Wu <bryan.wu@analog.com> Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl> Signed-off-by: Aubrey Li <aubrey.li@analog.com> Signed-off-by: Jie Zhang <jie.zhang@analog.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-06 21:50:22 +00:00
return 0;
}
Reference in New Issue Copy Permalink