linux/drivers/mtd/nand/ndfc.c

321 lines
7.5 KiB
C
Raw Normal View History

/*
* drivers/mtd/ndfc.c
*
* Overview:
* Platform independent driver for NDFC (NanD Flash Controller)
* integrated into EP440 cores
*
* Ported to an OF platform driver by Sean MacLennan
*
* The NDFC supports multiple chips, but this driver only supports a
* single chip since I do not have access to any boards with
* multiple chips.
*
* Author: Thomas Gleixner
*
* Copyright 2006 IBM
* Copyright 2008 PIKA Technologies
* Sean MacLennan <smaclennan@pikatech.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
*/
#include <linux/module.h>
#include <linux/mtd/nand.h>
#include <linux/mtd/nand_ecc.h>
#include <linux/mtd/partitions.h>
#include <linux/mtd/ndfc.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 08:04:11 +00:00
#include <linux/slab.h>
#include <linux/mtd/mtd.h>
#include <linux/of_platform.h>
#include <asm/io.h>
struct ndfc_controller {
struct platform_device *ofdev;
void __iomem *ndfcbase;
struct mtd_info mtd;
struct nand_chip chip;
int chip_select;
struct nand_hw_control ndfc_control;
#ifdef CONFIG_MTD_PARTITIONS
struct mtd_partition *parts;
#endif
};
static struct ndfc_controller ndfc_ctrl;
static void ndfc_select_chip(struct mtd_info *mtd, int chip)
{
uint32_t ccr;
struct ndfc_controller *ndfc = &ndfc_ctrl;
ccr = in_be32(ndfc->ndfcbase + NDFC_CCR);
if (chip >= 0) {
ccr &= ~NDFC_CCR_BS_MASK;
ccr |= NDFC_CCR_BS(chip + ndfc->chip_select);
} else
ccr |= NDFC_CCR_RESET_CE;
out_be32(ndfc->ndfcbase + NDFC_CCR, ccr);
}
static void ndfc_hwcontrol(struct mtd_info *mtd, int cmd, unsigned int ctrl)
{
struct ndfc_controller *ndfc = &ndfc_ctrl;
if (cmd == NAND_CMD_NONE)
return;
if (ctrl & NAND_CLE)
writel(cmd & 0xFF, ndfc->ndfcbase + NDFC_CMD);
else
writel(cmd & 0xFF, ndfc->ndfcbase + NDFC_ALE);
}
static int ndfc_ready(struct mtd_info *mtd)
{
struct ndfc_controller *ndfc = &ndfc_ctrl;
return in_be32(ndfc->ndfcbase + NDFC_STAT) & NDFC_STAT_IS_READY;
}
static void ndfc_enable_hwecc(struct mtd_info *mtd, int mode)
{
uint32_t ccr;
struct ndfc_controller *ndfc = &ndfc_ctrl;
ccr = in_be32(ndfc->ndfcbase + NDFC_CCR);
ccr |= NDFC_CCR_RESET_ECC;
out_be32(ndfc->ndfcbase + NDFC_CCR, ccr);
wmb();
}
static int ndfc_calculate_ecc(struct mtd_info *mtd,
const u_char *dat, u_char *ecc_code)
{
struct ndfc_controller *ndfc = &ndfc_ctrl;
uint32_t ecc;
uint8_t *p = (uint8_t *)&ecc;
wmb();
ecc = in_be32(ndfc->ndfcbase + NDFC_ECC);
/* The NDFC uses Smart Media (SMC) bytes order */
ecc_code[0] = p[1];
ecc_code[1] = p[2];
ecc_code[2] = p[3];
return 0;
}
/*
* Speedups for buffer read/write/verify
*
* NDFC allows 32bit read/write of data. So we can speed up the buffer
* functions. No further checking, as nand_base will always read/write
* page aligned.
*/
static void ndfc_read_buf(struct mtd_info *mtd, uint8_t *buf, int len)
{
struct ndfc_controller *ndfc = &ndfc_ctrl;
uint32_t *p = (uint32_t *) buf;
for(;len > 0; len -= 4)
*p++ = in_be32(ndfc->ndfcbase + NDFC_DATA);
}
static void ndfc_write_buf(struct mtd_info *mtd, const uint8_t *buf, int len)
{
struct ndfc_controller *ndfc = &ndfc_ctrl;
uint32_t *p = (uint32_t *) buf;
for(;len > 0; len -= 4)
out_be32(ndfc->ndfcbase + NDFC_DATA, *p++);
}
static int ndfc_verify_buf(struct mtd_info *mtd, const uint8_t *buf, int len)
{
struct ndfc_controller *ndfc = &ndfc_ctrl;
uint32_t *p = (uint32_t *) buf;
for(;len > 0; len -= 4)
if (*p++ != in_be32(ndfc->ndfcbase + NDFC_DATA))
return -EFAULT;
return 0;
}
/*
* Initialize chip structure
*/
static int ndfc_chip_init(struct ndfc_controller *ndfc,
struct device_node *node)
{
#ifdef CONFIG_MTD_PARTITIONS
#ifdef CONFIG_MTD_CMDLINE_PARTS
static const char *part_types[] = { "cmdlinepart", NULL };
#else
static const char *part_types[] = { NULL };
#endif
#endif
struct device_node *flash_np;
struct nand_chip *chip = &ndfc->chip;
int ret;
chip->IO_ADDR_R = ndfc->ndfcbase + NDFC_DATA;
chip->IO_ADDR_W = ndfc->ndfcbase + NDFC_DATA;
chip->cmd_ctrl = ndfc_hwcontrol;
chip->dev_ready = ndfc_ready;
chip->select_chip = ndfc_select_chip;
chip->chip_delay = 50;
chip->controller = &ndfc->ndfc_control;
chip->read_buf = ndfc_read_buf;
chip->write_buf = ndfc_write_buf;
chip->verify_buf = ndfc_verify_buf;
chip->ecc.correct = nand_correct_data;
chip->ecc.hwctl = ndfc_enable_hwecc;
chip->ecc.calculate = ndfc_calculate_ecc;
chip->ecc.mode = NAND_ECC_HW;
chip->ecc.size = 256;
chip->ecc.bytes = 3;
ndfc->mtd.priv = chip;
ndfc->mtd.owner = THIS_MODULE;
flash_np = of_get_next_child(node, NULL);
if (!flash_np)
return -ENODEV;
ndfc->mtd.name = kasprintf(GFP_KERNEL, "%s.%s",
dev_name(&ndfc->ofdev->dev), flash_np->name);
if (!ndfc->mtd.name) {
ret = -ENOMEM;
goto err;
}
ret = nand_scan(&ndfc->mtd, 1);
if (ret)
goto err;
#ifdef CONFIG_MTD_PARTITIONS
ret = parse_mtd_partitions(&ndfc->mtd, part_types, &ndfc->parts, 0);
if (ret < 0)
goto err;
#ifdef CONFIG_MTD_OF_PARTS
if (ret == 0) {
ret = of_mtd_parse_partitions(&ndfc->ofdev->dev, flash_np,
&ndfc->parts);
if (ret < 0)
goto err;
}
#endif
if (ret > 0)
ret = add_mtd_partitions(&ndfc->mtd, ndfc->parts, ret);
else
#endif
ret = add_mtd_device(&ndfc->mtd);
err:
of_node_put(flash_np);
if (ret)
kfree(ndfc->mtd.name);
return ret;
}
static int __devinit ndfc_probe(struct platform_device *ofdev,
const struct of_device_id *match)
{
struct ndfc_controller *ndfc = &ndfc_ctrl;
const u32 *reg;
u32 ccr;
int err, len;
spin_lock_init(&ndfc->ndfc_control.lock);
init_waitqueue_head(&ndfc->ndfc_control.wq);
ndfc->ofdev = ofdev;
dev_set_drvdata(&ofdev->dev, ndfc);
/* Read the reg property to get the chip select */
reg = of_get_property(ofdev->dev.of_node, "reg", &len);
if (reg == NULL || len != 12) {
dev_err(&ofdev->dev, "unable read reg property (%d)\n", len);
return -ENOENT;
}
ndfc->chip_select = reg[0];
ndfc->ndfcbase = of_iomap(ofdev->dev.of_node, 0);
if (!ndfc->ndfcbase) {
dev_err(&ofdev->dev, "failed to get memory\n");
return -EIO;
}
ccr = NDFC_CCR_BS(ndfc->chip_select);
/* It is ok if ccr does not exist - just default to 0 */
reg = of_get_property(ofdev->dev.of_node, "ccr", NULL);
if (reg)
ccr |= *reg;
out_be32(ndfc->ndfcbase + NDFC_CCR, ccr);
/* Set the bank settings if given */
reg = of_get_property(ofdev->dev.of_node, "bank-settings", NULL);
if (reg) {
int offset = NDFC_BCFG0 + (ndfc->chip_select << 2);
out_be32(ndfc->ndfcbase + offset, *reg);
}
err = ndfc_chip_init(ndfc, ofdev->dev.of_node);
if (err) {
iounmap(ndfc->ndfcbase);
return err;
}
return 0;
}
static int __devexit ndfc_remove(struct platform_device *ofdev)
{
struct ndfc_controller *ndfc = dev_get_drvdata(&ofdev->dev);
nand_release(&ndfc->mtd);
return 0;
}
static const struct of_device_id ndfc_match[] = {
{ .compatible = "ibm,ndfc", },
{}
};
MODULE_DEVICE_TABLE(of, ndfc_match);
static struct of_platform_driver ndfc_driver = {
.driver = {
.name = "ndfc",
.owner = THIS_MODULE,
.of_match_table = ndfc_match,
},
.probe = ndfc_probe,
.remove = __devexit_p(ndfc_remove),
};
static int __init ndfc_nand_init(void)
{
return of_register_platform_driver(&ndfc_driver);
}
static void __exit ndfc_nand_exit(void)
{
of_unregister_platform_driver(&ndfc_driver);
}
module_init(ndfc_nand_init);
module_exit(ndfc_nand_exit);
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Thomas Gleixner <tglx@linutronix.de>");
MODULE_DESCRIPTION("OF Platform driver for NDFC");