bpf: Introduce cgroup iter
Cgroup_iter is a type of bpf_iter. It walks over cgroups in four modes:
- walking a cgroup's descendants in pre-order.
- walking a cgroup's descendants in post-order.
- walking a cgroup's ancestors.
- process only the given cgroup.
When attaching cgroup_iter, one can set a cgroup to the iter_link
created from attaching. This cgroup is passed as a file descriptor
or cgroup id and serves as the starting point of the walk. If no
cgroup is specified, the starting point will be the root cgroup v2.
For walking descendants, one can specify the order: either pre-order or
post-order. For walking ancestors, the walk starts at the specified
cgroup and ends at the root.
One can also terminate the walk early by returning 1 from the iter
program.
Note that because walking cgroup hierarchy holds cgroup_mutex, the iter
program is called with cgroup_mutex held.
Currently only one session is supported, which means, depending on the
volume of data bpf program intends to send to user space, the number
of cgroups that can be walked is limited. For example, given the current
buffer size is 8 * PAGE_SIZE, if the program sends 64B data for each
cgroup, assuming PAGE_SIZE is 4kb, the total number of cgroups that can
be walked is 512. This is a limitation of cgroup_iter. If the output
data is larger than the kernel buffer size, after all data in the
kernel buffer is consumed by user space, the subsequent read() syscall
will signal EOPNOTSUPP. In order to work around, the user may have to
update their program to reduce the volume of data sent to output. For
example, skip some uninteresting cgroups. In future, we may extend
bpf_iter flags to allow customizing buffer size.
Acked-by: Yonghong Song <yhs@fb.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Hao Luo <haoluo@google.com>
Link: https://lore.kernel.org/r/20220824233117.1312810-2-haoluo@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2022-08-24 23:31:13 +00:00
|
|
|
// SPDX-License-Identifier: GPL-2.0-only
|
|
|
|
/* Copyright (c) 2022 Google */
|
|
|
|
#include <linux/bpf.h>
|
|
|
|
#include <linux/btf_ids.h>
|
|
|
|
#include <linux/cgroup.h>
|
|
|
|
#include <linux/kernel.h>
|
|
|
|
#include <linux/seq_file.h>
|
|
|
|
|
|
|
|
#include "../cgroup/cgroup-internal.h" /* cgroup_mutex and cgroup_is_dead */
|
|
|
|
|
|
|
|
/* cgroup_iter provides four modes of traversal to the cgroup hierarchy.
|
|
|
|
*
|
|
|
|
* 1. Walk the descendants of a cgroup in pre-order.
|
|
|
|
* 2. Walk the descendants of a cgroup in post-order.
|
|
|
|
* 3. Walk the ancestors of a cgroup.
|
|
|
|
* 4. Show the given cgroup only.
|
|
|
|
*
|
|
|
|
* For walking descendants, cgroup_iter can walk in either pre-order or
|
|
|
|
* post-order. For walking ancestors, the iter walks up from a cgroup to
|
|
|
|
* the root.
|
|
|
|
*
|
|
|
|
* The iter program can terminate the walk early by returning 1. Walk
|
|
|
|
* continues if prog returns 0.
|
|
|
|
*
|
|
|
|
* The prog can check (seq->num == 0) to determine whether this is
|
|
|
|
* the first element. The prog may also be passed a NULL cgroup,
|
|
|
|
* which means the walk has completed and the prog has a chance to
|
|
|
|
* do post-processing, such as outputting an epilogue.
|
|
|
|
*
|
|
|
|
* Note: the iter_prog is called with cgroup_mutex held.
|
|
|
|
*
|
|
|
|
* Currently only one session is supported, which means, depending on the
|
|
|
|
* volume of data bpf program intends to send to user space, the number
|
|
|
|
* of cgroups that can be walked is limited. For example, given the current
|
|
|
|
* buffer size is 8 * PAGE_SIZE, if the program sends 64B data for each
|
|
|
|
* cgroup, assuming PAGE_SIZE is 4kb, the total number of cgroups that can
|
|
|
|
* be walked is 512. This is a limitation of cgroup_iter. If the output data
|
|
|
|
* is larger than the kernel buffer size, after all data in the kernel buffer
|
|
|
|
* is consumed by user space, the subsequent read() syscall will signal
|
|
|
|
* EOPNOTSUPP. In order to work around, the user may have to update their
|
|
|
|
* program to reduce the volume of data sent to output. For example, skip
|
|
|
|
* some uninteresting cgroups.
|
|
|
|
*/
|
|
|
|
|
|
|
|
struct bpf_iter__cgroup {
|
|
|
|
__bpf_md_ptr(struct bpf_iter_meta *, meta);
|
|
|
|
__bpf_md_ptr(struct cgroup *, cgroup);
|
|
|
|
};
|
|
|
|
|
|
|
|
struct cgroup_iter_priv {
|
|
|
|
struct cgroup_subsys_state *start_css;
|
|
|
|
bool visited_all;
|
|
|
|
bool terminate;
|
|
|
|
int order;
|
|
|
|
};
|
|
|
|
|
|
|
|
static void *cgroup_iter_seq_start(struct seq_file *seq, loff_t *pos)
|
|
|
|
{
|
|
|
|
struct cgroup_iter_priv *p = seq->private;
|
|
|
|
|
2023-03-03 09:53:10 +00:00
|
|
|
cgroup_lock();
|
bpf: Introduce cgroup iter
Cgroup_iter is a type of bpf_iter. It walks over cgroups in four modes:
- walking a cgroup's descendants in pre-order.
- walking a cgroup's descendants in post-order.
- walking a cgroup's ancestors.
- process only the given cgroup.
When attaching cgroup_iter, one can set a cgroup to the iter_link
created from attaching. This cgroup is passed as a file descriptor
or cgroup id and serves as the starting point of the walk. If no
cgroup is specified, the starting point will be the root cgroup v2.
For walking descendants, one can specify the order: either pre-order or
post-order. For walking ancestors, the walk starts at the specified
cgroup and ends at the root.
One can also terminate the walk early by returning 1 from the iter
program.
Note that because walking cgroup hierarchy holds cgroup_mutex, the iter
program is called with cgroup_mutex held.
Currently only one session is supported, which means, depending on the
volume of data bpf program intends to send to user space, the number
of cgroups that can be walked is limited. For example, given the current
buffer size is 8 * PAGE_SIZE, if the program sends 64B data for each
cgroup, assuming PAGE_SIZE is 4kb, the total number of cgroups that can
be walked is 512. This is a limitation of cgroup_iter. If the output
data is larger than the kernel buffer size, after all data in the
kernel buffer is consumed by user space, the subsequent read() syscall
will signal EOPNOTSUPP. In order to work around, the user may have to
update their program to reduce the volume of data sent to output. For
example, skip some uninteresting cgroups. In future, we may extend
bpf_iter flags to allow customizing buffer size.
Acked-by: Yonghong Song <yhs@fb.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Hao Luo <haoluo@google.com>
Link: https://lore.kernel.org/r/20220824233117.1312810-2-haoluo@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2022-08-24 23:31:13 +00:00
|
|
|
|
|
|
|
/* cgroup_iter doesn't support read across multiple sessions. */
|
|
|
|
if (*pos > 0) {
|
|
|
|
if (p->visited_all)
|
|
|
|
return NULL;
|
|
|
|
|
|
|
|
/* Haven't visited all, but because cgroup_mutex has dropped,
|
|
|
|
* return -EOPNOTSUPP to indicate incomplete iteration.
|
|
|
|
*/
|
|
|
|
return ERR_PTR(-EOPNOTSUPP);
|
|
|
|
}
|
|
|
|
|
|
|
|
++*pos;
|
|
|
|
p->terminate = false;
|
|
|
|
p->visited_all = false;
|
2022-08-25 22:39:36 +00:00
|
|
|
if (p->order == BPF_CGROUP_ITER_DESCENDANTS_PRE)
|
bpf: Introduce cgroup iter
Cgroup_iter is a type of bpf_iter. It walks over cgroups in four modes:
- walking a cgroup's descendants in pre-order.
- walking a cgroup's descendants in post-order.
- walking a cgroup's ancestors.
- process only the given cgroup.
When attaching cgroup_iter, one can set a cgroup to the iter_link
created from attaching. This cgroup is passed as a file descriptor
or cgroup id and serves as the starting point of the walk. If no
cgroup is specified, the starting point will be the root cgroup v2.
For walking descendants, one can specify the order: either pre-order or
post-order. For walking ancestors, the walk starts at the specified
cgroup and ends at the root.
One can also terminate the walk early by returning 1 from the iter
program.
Note that because walking cgroup hierarchy holds cgroup_mutex, the iter
program is called with cgroup_mutex held.
Currently only one session is supported, which means, depending on the
volume of data bpf program intends to send to user space, the number
of cgroups that can be walked is limited. For example, given the current
buffer size is 8 * PAGE_SIZE, if the program sends 64B data for each
cgroup, assuming PAGE_SIZE is 4kb, the total number of cgroups that can
be walked is 512. This is a limitation of cgroup_iter. If the output
data is larger than the kernel buffer size, after all data in the
kernel buffer is consumed by user space, the subsequent read() syscall
will signal EOPNOTSUPP. In order to work around, the user may have to
update their program to reduce the volume of data sent to output. For
example, skip some uninteresting cgroups. In future, we may extend
bpf_iter flags to allow customizing buffer size.
Acked-by: Yonghong Song <yhs@fb.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Hao Luo <haoluo@google.com>
Link: https://lore.kernel.org/r/20220824233117.1312810-2-haoluo@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2022-08-24 23:31:13 +00:00
|
|
|
return css_next_descendant_pre(NULL, p->start_css);
|
2022-08-25 22:39:36 +00:00
|
|
|
else if (p->order == BPF_CGROUP_ITER_DESCENDANTS_POST)
|
bpf: Introduce cgroup iter
Cgroup_iter is a type of bpf_iter. It walks over cgroups in four modes:
- walking a cgroup's descendants in pre-order.
- walking a cgroup's descendants in post-order.
- walking a cgroup's ancestors.
- process only the given cgroup.
When attaching cgroup_iter, one can set a cgroup to the iter_link
created from attaching. This cgroup is passed as a file descriptor
or cgroup id and serves as the starting point of the walk. If no
cgroup is specified, the starting point will be the root cgroup v2.
For walking descendants, one can specify the order: either pre-order or
post-order. For walking ancestors, the walk starts at the specified
cgroup and ends at the root.
One can also terminate the walk early by returning 1 from the iter
program.
Note that because walking cgroup hierarchy holds cgroup_mutex, the iter
program is called with cgroup_mutex held.
Currently only one session is supported, which means, depending on the
volume of data bpf program intends to send to user space, the number
of cgroups that can be walked is limited. For example, given the current
buffer size is 8 * PAGE_SIZE, if the program sends 64B data for each
cgroup, assuming PAGE_SIZE is 4kb, the total number of cgroups that can
be walked is 512. This is a limitation of cgroup_iter. If the output
data is larger than the kernel buffer size, after all data in the
kernel buffer is consumed by user space, the subsequent read() syscall
will signal EOPNOTSUPP. In order to work around, the user may have to
update their program to reduce the volume of data sent to output. For
example, skip some uninteresting cgroups. In future, we may extend
bpf_iter flags to allow customizing buffer size.
Acked-by: Yonghong Song <yhs@fb.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Hao Luo <haoluo@google.com>
Link: https://lore.kernel.org/r/20220824233117.1312810-2-haoluo@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2022-08-24 23:31:13 +00:00
|
|
|
return css_next_descendant_post(NULL, p->start_css);
|
2022-08-31 02:16:18 +00:00
|
|
|
else /* BPF_CGROUP_ITER_SELF_ONLY and BPF_CGROUP_ITER_ANCESTORS_UP */
|
bpf: Introduce cgroup iter
Cgroup_iter is a type of bpf_iter. It walks over cgroups in four modes:
- walking a cgroup's descendants in pre-order.
- walking a cgroup's descendants in post-order.
- walking a cgroup's ancestors.
- process only the given cgroup.
When attaching cgroup_iter, one can set a cgroup to the iter_link
created from attaching. This cgroup is passed as a file descriptor
or cgroup id and serves as the starting point of the walk. If no
cgroup is specified, the starting point will be the root cgroup v2.
For walking descendants, one can specify the order: either pre-order or
post-order. For walking ancestors, the walk starts at the specified
cgroup and ends at the root.
One can also terminate the walk early by returning 1 from the iter
program.
Note that because walking cgroup hierarchy holds cgroup_mutex, the iter
program is called with cgroup_mutex held.
Currently only one session is supported, which means, depending on the
volume of data bpf program intends to send to user space, the number
of cgroups that can be walked is limited. For example, given the current
buffer size is 8 * PAGE_SIZE, if the program sends 64B data for each
cgroup, assuming PAGE_SIZE is 4kb, the total number of cgroups that can
be walked is 512. This is a limitation of cgroup_iter. If the output
data is larger than the kernel buffer size, after all data in the
kernel buffer is consumed by user space, the subsequent read() syscall
will signal EOPNOTSUPP. In order to work around, the user may have to
update their program to reduce the volume of data sent to output. For
example, skip some uninteresting cgroups. In future, we may extend
bpf_iter flags to allow customizing buffer size.
Acked-by: Yonghong Song <yhs@fb.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Hao Luo <haoluo@google.com>
Link: https://lore.kernel.org/r/20220824233117.1312810-2-haoluo@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2022-08-24 23:31:13 +00:00
|
|
|
return p->start_css;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int __cgroup_iter_seq_show(struct seq_file *seq,
|
|
|
|
struct cgroup_subsys_state *css, int in_stop);
|
|
|
|
|
|
|
|
static void cgroup_iter_seq_stop(struct seq_file *seq, void *v)
|
|
|
|
{
|
|
|
|
struct cgroup_iter_priv *p = seq->private;
|
|
|
|
|
2023-03-03 09:53:10 +00:00
|
|
|
cgroup_unlock();
|
bpf: Introduce cgroup iter
Cgroup_iter is a type of bpf_iter. It walks over cgroups in four modes:
- walking a cgroup's descendants in pre-order.
- walking a cgroup's descendants in post-order.
- walking a cgroup's ancestors.
- process only the given cgroup.
When attaching cgroup_iter, one can set a cgroup to the iter_link
created from attaching. This cgroup is passed as a file descriptor
or cgroup id and serves as the starting point of the walk. If no
cgroup is specified, the starting point will be the root cgroup v2.
For walking descendants, one can specify the order: either pre-order or
post-order. For walking ancestors, the walk starts at the specified
cgroup and ends at the root.
One can also terminate the walk early by returning 1 from the iter
program.
Note that because walking cgroup hierarchy holds cgroup_mutex, the iter
program is called with cgroup_mutex held.
Currently only one session is supported, which means, depending on the
volume of data bpf program intends to send to user space, the number
of cgroups that can be walked is limited. For example, given the current
buffer size is 8 * PAGE_SIZE, if the program sends 64B data for each
cgroup, assuming PAGE_SIZE is 4kb, the total number of cgroups that can
be walked is 512. This is a limitation of cgroup_iter. If the output
data is larger than the kernel buffer size, after all data in the
kernel buffer is consumed by user space, the subsequent read() syscall
will signal EOPNOTSUPP. In order to work around, the user may have to
update their program to reduce the volume of data sent to output. For
example, skip some uninteresting cgroups. In future, we may extend
bpf_iter flags to allow customizing buffer size.
Acked-by: Yonghong Song <yhs@fb.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Hao Luo <haoluo@google.com>
Link: https://lore.kernel.org/r/20220824233117.1312810-2-haoluo@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2022-08-24 23:31:13 +00:00
|
|
|
|
|
|
|
/* pass NULL to the prog for post-processing */
|
|
|
|
if (!v) {
|
|
|
|
__cgroup_iter_seq_show(seq, NULL, true);
|
|
|
|
p->visited_all = true;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
static void *cgroup_iter_seq_next(struct seq_file *seq, void *v, loff_t *pos)
|
|
|
|
{
|
|
|
|
struct cgroup_subsys_state *curr = (struct cgroup_subsys_state *)v;
|
|
|
|
struct cgroup_iter_priv *p = seq->private;
|
|
|
|
|
|
|
|
++*pos;
|
|
|
|
if (p->terminate)
|
|
|
|
return NULL;
|
|
|
|
|
2022-08-25 22:39:36 +00:00
|
|
|
if (p->order == BPF_CGROUP_ITER_DESCENDANTS_PRE)
|
bpf: Introduce cgroup iter
Cgroup_iter is a type of bpf_iter. It walks over cgroups in four modes:
- walking a cgroup's descendants in pre-order.
- walking a cgroup's descendants in post-order.
- walking a cgroup's ancestors.
- process only the given cgroup.
When attaching cgroup_iter, one can set a cgroup to the iter_link
created from attaching. This cgroup is passed as a file descriptor
or cgroup id and serves as the starting point of the walk. If no
cgroup is specified, the starting point will be the root cgroup v2.
For walking descendants, one can specify the order: either pre-order or
post-order. For walking ancestors, the walk starts at the specified
cgroup and ends at the root.
One can also terminate the walk early by returning 1 from the iter
program.
Note that because walking cgroup hierarchy holds cgroup_mutex, the iter
program is called with cgroup_mutex held.
Currently only one session is supported, which means, depending on the
volume of data bpf program intends to send to user space, the number
of cgroups that can be walked is limited. For example, given the current
buffer size is 8 * PAGE_SIZE, if the program sends 64B data for each
cgroup, assuming PAGE_SIZE is 4kb, the total number of cgroups that can
be walked is 512. This is a limitation of cgroup_iter. If the output
data is larger than the kernel buffer size, after all data in the
kernel buffer is consumed by user space, the subsequent read() syscall
will signal EOPNOTSUPP. In order to work around, the user may have to
update their program to reduce the volume of data sent to output. For
example, skip some uninteresting cgroups. In future, we may extend
bpf_iter flags to allow customizing buffer size.
Acked-by: Yonghong Song <yhs@fb.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Hao Luo <haoluo@google.com>
Link: https://lore.kernel.org/r/20220824233117.1312810-2-haoluo@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2022-08-24 23:31:13 +00:00
|
|
|
return css_next_descendant_pre(curr, p->start_css);
|
2022-08-25 22:39:36 +00:00
|
|
|
else if (p->order == BPF_CGROUP_ITER_DESCENDANTS_POST)
|
bpf: Introduce cgroup iter
Cgroup_iter is a type of bpf_iter. It walks over cgroups in four modes:
- walking a cgroup's descendants in pre-order.
- walking a cgroup's descendants in post-order.
- walking a cgroup's ancestors.
- process only the given cgroup.
When attaching cgroup_iter, one can set a cgroup to the iter_link
created from attaching. This cgroup is passed as a file descriptor
or cgroup id and serves as the starting point of the walk. If no
cgroup is specified, the starting point will be the root cgroup v2.
For walking descendants, one can specify the order: either pre-order or
post-order. For walking ancestors, the walk starts at the specified
cgroup and ends at the root.
One can also terminate the walk early by returning 1 from the iter
program.
Note that because walking cgroup hierarchy holds cgroup_mutex, the iter
program is called with cgroup_mutex held.
Currently only one session is supported, which means, depending on the
volume of data bpf program intends to send to user space, the number
of cgroups that can be walked is limited. For example, given the current
buffer size is 8 * PAGE_SIZE, if the program sends 64B data for each
cgroup, assuming PAGE_SIZE is 4kb, the total number of cgroups that can
be walked is 512. This is a limitation of cgroup_iter. If the output
data is larger than the kernel buffer size, after all data in the
kernel buffer is consumed by user space, the subsequent read() syscall
will signal EOPNOTSUPP. In order to work around, the user may have to
update their program to reduce the volume of data sent to output. For
example, skip some uninteresting cgroups. In future, we may extend
bpf_iter flags to allow customizing buffer size.
Acked-by: Yonghong Song <yhs@fb.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Hao Luo <haoluo@google.com>
Link: https://lore.kernel.org/r/20220824233117.1312810-2-haoluo@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2022-08-24 23:31:13 +00:00
|
|
|
return css_next_descendant_post(curr, p->start_css);
|
2022-08-25 22:39:36 +00:00
|
|
|
else if (p->order == BPF_CGROUP_ITER_ANCESTORS_UP)
|
bpf: Introduce cgroup iter
Cgroup_iter is a type of bpf_iter. It walks over cgroups in four modes:
- walking a cgroup's descendants in pre-order.
- walking a cgroup's descendants in post-order.
- walking a cgroup's ancestors.
- process only the given cgroup.
When attaching cgroup_iter, one can set a cgroup to the iter_link
created from attaching. This cgroup is passed as a file descriptor
or cgroup id and serves as the starting point of the walk. If no
cgroup is specified, the starting point will be the root cgroup v2.
For walking descendants, one can specify the order: either pre-order or
post-order. For walking ancestors, the walk starts at the specified
cgroup and ends at the root.
One can also terminate the walk early by returning 1 from the iter
program.
Note that because walking cgroup hierarchy holds cgroup_mutex, the iter
program is called with cgroup_mutex held.
Currently only one session is supported, which means, depending on the
volume of data bpf program intends to send to user space, the number
of cgroups that can be walked is limited. For example, given the current
buffer size is 8 * PAGE_SIZE, if the program sends 64B data for each
cgroup, assuming PAGE_SIZE is 4kb, the total number of cgroups that can
be walked is 512. This is a limitation of cgroup_iter. If the output
data is larger than the kernel buffer size, after all data in the
kernel buffer is consumed by user space, the subsequent read() syscall
will signal EOPNOTSUPP. In order to work around, the user may have to
update their program to reduce the volume of data sent to output. For
example, skip some uninteresting cgroups. In future, we may extend
bpf_iter flags to allow customizing buffer size.
Acked-by: Yonghong Song <yhs@fb.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Hao Luo <haoluo@google.com>
Link: https://lore.kernel.org/r/20220824233117.1312810-2-haoluo@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2022-08-24 23:31:13 +00:00
|
|
|
return curr->parent;
|
2022-08-25 22:39:36 +00:00
|
|
|
else /* BPF_CGROUP_ITER_SELF_ONLY */
|
bpf: Introduce cgroup iter
Cgroup_iter is a type of bpf_iter. It walks over cgroups in four modes:
- walking a cgroup's descendants in pre-order.
- walking a cgroup's descendants in post-order.
- walking a cgroup's ancestors.
- process only the given cgroup.
When attaching cgroup_iter, one can set a cgroup to the iter_link
created from attaching. This cgroup is passed as a file descriptor
or cgroup id and serves as the starting point of the walk. If no
cgroup is specified, the starting point will be the root cgroup v2.
For walking descendants, one can specify the order: either pre-order or
post-order. For walking ancestors, the walk starts at the specified
cgroup and ends at the root.
One can also terminate the walk early by returning 1 from the iter
program.
Note that because walking cgroup hierarchy holds cgroup_mutex, the iter
program is called with cgroup_mutex held.
Currently only one session is supported, which means, depending on the
volume of data bpf program intends to send to user space, the number
of cgroups that can be walked is limited. For example, given the current
buffer size is 8 * PAGE_SIZE, if the program sends 64B data for each
cgroup, assuming PAGE_SIZE is 4kb, the total number of cgroups that can
be walked is 512. This is a limitation of cgroup_iter. If the output
data is larger than the kernel buffer size, after all data in the
kernel buffer is consumed by user space, the subsequent read() syscall
will signal EOPNOTSUPP. In order to work around, the user may have to
update their program to reduce the volume of data sent to output. For
example, skip some uninteresting cgroups. In future, we may extend
bpf_iter flags to allow customizing buffer size.
Acked-by: Yonghong Song <yhs@fb.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Hao Luo <haoluo@google.com>
Link: https://lore.kernel.org/r/20220824233117.1312810-2-haoluo@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2022-08-24 23:31:13 +00:00
|
|
|
return NULL;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int __cgroup_iter_seq_show(struct seq_file *seq,
|
|
|
|
struct cgroup_subsys_state *css, int in_stop)
|
|
|
|
{
|
|
|
|
struct cgroup_iter_priv *p = seq->private;
|
|
|
|
struct bpf_iter__cgroup ctx;
|
|
|
|
struct bpf_iter_meta meta;
|
|
|
|
struct bpf_prog *prog;
|
|
|
|
int ret = 0;
|
|
|
|
|
|
|
|
/* cgroup is dead, skip this element */
|
|
|
|
if (css && cgroup_is_dead(css->cgroup))
|
|
|
|
return 0;
|
|
|
|
|
|
|
|
ctx.meta = &meta;
|
|
|
|
ctx.cgroup = css ? css->cgroup : NULL;
|
|
|
|
meta.seq = seq;
|
|
|
|
prog = bpf_iter_get_info(&meta, in_stop);
|
|
|
|
if (prog)
|
|
|
|
ret = bpf_iter_run_prog(prog, &ctx);
|
|
|
|
|
|
|
|
/* if prog returns > 0, terminate after this element. */
|
|
|
|
if (ret != 0)
|
|
|
|
p->terminate = true;
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int cgroup_iter_seq_show(struct seq_file *seq, void *v)
|
|
|
|
{
|
|
|
|
return __cgroup_iter_seq_show(seq, (struct cgroup_subsys_state *)v,
|
|
|
|
false);
|
|
|
|
}
|
|
|
|
|
|
|
|
static const struct seq_operations cgroup_iter_seq_ops = {
|
|
|
|
.start = cgroup_iter_seq_start,
|
|
|
|
.next = cgroup_iter_seq_next,
|
|
|
|
.stop = cgroup_iter_seq_stop,
|
|
|
|
.show = cgroup_iter_seq_show,
|
|
|
|
};
|
|
|
|
|
2022-10-26 04:28:40 +00:00
|
|
|
BTF_ID_LIST_GLOBAL_SINGLE(bpf_cgroup_btf_id, struct, cgroup)
|
bpf: Introduce cgroup iter
Cgroup_iter is a type of bpf_iter. It walks over cgroups in four modes:
- walking a cgroup's descendants in pre-order.
- walking a cgroup's descendants in post-order.
- walking a cgroup's ancestors.
- process only the given cgroup.
When attaching cgroup_iter, one can set a cgroup to the iter_link
created from attaching. This cgroup is passed as a file descriptor
or cgroup id and serves as the starting point of the walk. If no
cgroup is specified, the starting point will be the root cgroup v2.
For walking descendants, one can specify the order: either pre-order or
post-order. For walking ancestors, the walk starts at the specified
cgroup and ends at the root.
One can also terminate the walk early by returning 1 from the iter
program.
Note that because walking cgroup hierarchy holds cgroup_mutex, the iter
program is called with cgroup_mutex held.
Currently only one session is supported, which means, depending on the
volume of data bpf program intends to send to user space, the number
of cgroups that can be walked is limited. For example, given the current
buffer size is 8 * PAGE_SIZE, if the program sends 64B data for each
cgroup, assuming PAGE_SIZE is 4kb, the total number of cgroups that can
be walked is 512. This is a limitation of cgroup_iter. If the output
data is larger than the kernel buffer size, after all data in the
kernel buffer is consumed by user space, the subsequent read() syscall
will signal EOPNOTSUPP. In order to work around, the user may have to
update their program to reduce the volume of data sent to output. For
example, skip some uninteresting cgroups. In future, we may extend
bpf_iter flags to allow customizing buffer size.
Acked-by: Yonghong Song <yhs@fb.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Hao Luo <haoluo@google.com>
Link: https://lore.kernel.org/r/20220824233117.1312810-2-haoluo@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2022-08-24 23:31:13 +00:00
|
|
|
|
|
|
|
static int cgroup_iter_seq_init(void *priv, struct bpf_iter_aux_info *aux)
|
|
|
|
{
|
|
|
|
struct cgroup_iter_priv *p = (struct cgroup_iter_priv *)priv;
|
|
|
|
struct cgroup *cgrp = aux->cgroup.start;
|
|
|
|
|
2022-11-21 07:34:38 +00:00
|
|
|
/* bpf_iter_attach_cgroup() has already acquired an extra reference
|
|
|
|
* for the start cgroup, but the reference may be released after
|
|
|
|
* cgroup_iter_seq_init(), so acquire another reference for the
|
|
|
|
* start cgroup.
|
|
|
|
*/
|
bpf: Introduce cgroup iter
Cgroup_iter is a type of bpf_iter. It walks over cgroups in four modes:
- walking a cgroup's descendants in pre-order.
- walking a cgroup's descendants in post-order.
- walking a cgroup's ancestors.
- process only the given cgroup.
When attaching cgroup_iter, one can set a cgroup to the iter_link
created from attaching. This cgroup is passed as a file descriptor
or cgroup id and serves as the starting point of the walk. If no
cgroup is specified, the starting point will be the root cgroup v2.
For walking descendants, one can specify the order: either pre-order or
post-order. For walking ancestors, the walk starts at the specified
cgroup and ends at the root.
One can also terminate the walk early by returning 1 from the iter
program.
Note that because walking cgroup hierarchy holds cgroup_mutex, the iter
program is called with cgroup_mutex held.
Currently only one session is supported, which means, depending on the
volume of data bpf program intends to send to user space, the number
of cgroups that can be walked is limited. For example, given the current
buffer size is 8 * PAGE_SIZE, if the program sends 64B data for each
cgroup, assuming PAGE_SIZE is 4kb, the total number of cgroups that can
be walked is 512. This is a limitation of cgroup_iter. If the output
data is larger than the kernel buffer size, after all data in the
kernel buffer is consumed by user space, the subsequent read() syscall
will signal EOPNOTSUPP. In order to work around, the user may have to
update their program to reduce the volume of data sent to output. For
example, skip some uninteresting cgroups. In future, we may extend
bpf_iter flags to allow customizing buffer size.
Acked-by: Yonghong Song <yhs@fb.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Hao Luo <haoluo@google.com>
Link: https://lore.kernel.org/r/20220824233117.1312810-2-haoluo@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2022-08-24 23:31:13 +00:00
|
|
|
p->start_css = &cgrp->self;
|
2022-11-21 07:34:38 +00:00
|
|
|
css_get(p->start_css);
|
bpf: Introduce cgroup iter
Cgroup_iter is a type of bpf_iter. It walks over cgroups in four modes:
- walking a cgroup's descendants in pre-order.
- walking a cgroup's descendants in post-order.
- walking a cgroup's ancestors.
- process only the given cgroup.
When attaching cgroup_iter, one can set a cgroup to the iter_link
created from attaching. This cgroup is passed as a file descriptor
or cgroup id and serves as the starting point of the walk. If no
cgroup is specified, the starting point will be the root cgroup v2.
For walking descendants, one can specify the order: either pre-order or
post-order. For walking ancestors, the walk starts at the specified
cgroup and ends at the root.
One can also terminate the walk early by returning 1 from the iter
program.
Note that because walking cgroup hierarchy holds cgroup_mutex, the iter
program is called with cgroup_mutex held.
Currently only one session is supported, which means, depending on the
volume of data bpf program intends to send to user space, the number
of cgroups that can be walked is limited. For example, given the current
buffer size is 8 * PAGE_SIZE, if the program sends 64B data for each
cgroup, assuming PAGE_SIZE is 4kb, the total number of cgroups that can
be walked is 512. This is a limitation of cgroup_iter. If the output
data is larger than the kernel buffer size, after all data in the
kernel buffer is consumed by user space, the subsequent read() syscall
will signal EOPNOTSUPP. In order to work around, the user may have to
update their program to reduce the volume of data sent to output. For
example, skip some uninteresting cgroups. In future, we may extend
bpf_iter flags to allow customizing buffer size.
Acked-by: Yonghong Song <yhs@fb.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Hao Luo <haoluo@google.com>
Link: https://lore.kernel.org/r/20220824233117.1312810-2-haoluo@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2022-08-24 23:31:13 +00:00
|
|
|
p->terminate = false;
|
|
|
|
p->visited_all = false;
|
|
|
|
p->order = aux->cgroup.order;
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2022-11-21 07:34:38 +00:00
|
|
|
static void cgroup_iter_seq_fini(void *priv)
|
|
|
|
{
|
|
|
|
struct cgroup_iter_priv *p = (struct cgroup_iter_priv *)priv;
|
|
|
|
|
|
|
|
css_put(p->start_css);
|
|
|
|
}
|
|
|
|
|
bpf: Introduce cgroup iter
Cgroup_iter is a type of bpf_iter. It walks over cgroups in four modes:
- walking a cgroup's descendants in pre-order.
- walking a cgroup's descendants in post-order.
- walking a cgroup's ancestors.
- process only the given cgroup.
When attaching cgroup_iter, one can set a cgroup to the iter_link
created from attaching. This cgroup is passed as a file descriptor
or cgroup id and serves as the starting point of the walk. If no
cgroup is specified, the starting point will be the root cgroup v2.
For walking descendants, one can specify the order: either pre-order or
post-order. For walking ancestors, the walk starts at the specified
cgroup and ends at the root.
One can also terminate the walk early by returning 1 from the iter
program.
Note that because walking cgroup hierarchy holds cgroup_mutex, the iter
program is called with cgroup_mutex held.
Currently only one session is supported, which means, depending on the
volume of data bpf program intends to send to user space, the number
of cgroups that can be walked is limited. For example, given the current
buffer size is 8 * PAGE_SIZE, if the program sends 64B data for each
cgroup, assuming PAGE_SIZE is 4kb, the total number of cgroups that can
be walked is 512. This is a limitation of cgroup_iter. If the output
data is larger than the kernel buffer size, after all data in the
kernel buffer is consumed by user space, the subsequent read() syscall
will signal EOPNOTSUPP. In order to work around, the user may have to
update their program to reduce the volume of data sent to output. For
example, skip some uninteresting cgroups. In future, we may extend
bpf_iter flags to allow customizing buffer size.
Acked-by: Yonghong Song <yhs@fb.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Hao Luo <haoluo@google.com>
Link: https://lore.kernel.org/r/20220824233117.1312810-2-haoluo@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2022-08-24 23:31:13 +00:00
|
|
|
static const struct bpf_iter_seq_info cgroup_iter_seq_info = {
|
|
|
|
.seq_ops = &cgroup_iter_seq_ops,
|
|
|
|
.init_seq_private = cgroup_iter_seq_init,
|
2022-11-21 07:34:38 +00:00
|
|
|
.fini_seq_private = cgroup_iter_seq_fini,
|
bpf: Introduce cgroup iter
Cgroup_iter is a type of bpf_iter. It walks over cgroups in four modes:
- walking a cgroup's descendants in pre-order.
- walking a cgroup's descendants in post-order.
- walking a cgroup's ancestors.
- process only the given cgroup.
When attaching cgroup_iter, one can set a cgroup to the iter_link
created from attaching. This cgroup is passed as a file descriptor
or cgroup id and serves as the starting point of the walk. If no
cgroup is specified, the starting point will be the root cgroup v2.
For walking descendants, one can specify the order: either pre-order or
post-order. For walking ancestors, the walk starts at the specified
cgroup and ends at the root.
One can also terminate the walk early by returning 1 from the iter
program.
Note that because walking cgroup hierarchy holds cgroup_mutex, the iter
program is called with cgroup_mutex held.
Currently only one session is supported, which means, depending on the
volume of data bpf program intends to send to user space, the number
of cgroups that can be walked is limited. For example, given the current
buffer size is 8 * PAGE_SIZE, if the program sends 64B data for each
cgroup, assuming PAGE_SIZE is 4kb, the total number of cgroups that can
be walked is 512. This is a limitation of cgroup_iter. If the output
data is larger than the kernel buffer size, after all data in the
kernel buffer is consumed by user space, the subsequent read() syscall
will signal EOPNOTSUPP. In order to work around, the user may have to
update their program to reduce the volume of data sent to output. For
example, skip some uninteresting cgroups. In future, we may extend
bpf_iter flags to allow customizing buffer size.
Acked-by: Yonghong Song <yhs@fb.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Hao Luo <haoluo@google.com>
Link: https://lore.kernel.org/r/20220824233117.1312810-2-haoluo@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2022-08-24 23:31:13 +00:00
|
|
|
.seq_priv_size = sizeof(struct cgroup_iter_priv),
|
|
|
|
};
|
|
|
|
|
|
|
|
static int bpf_iter_attach_cgroup(struct bpf_prog *prog,
|
|
|
|
union bpf_iter_link_info *linfo,
|
|
|
|
struct bpf_iter_aux_info *aux)
|
|
|
|
{
|
|
|
|
int fd = linfo->cgroup.cgroup_fd;
|
|
|
|
u64 id = linfo->cgroup.cgroup_id;
|
|
|
|
int order = linfo->cgroup.order;
|
|
|
|
struct cgroup *cgrp;
|
|
|
|
|
2022-08-25 22:39:36 +00:00
|
|
|
if (order != BPF_CGROUP_ITER_DESCENDANTS_PRE &&
|
|
|
|
order != BPF_CGROUP_ITER_DESCENDANTS_POST &&
|
|
|
|
order != BPF_CGROUP_ITER_ANCESTORS_UP &&
|
|
|
|
order != BPF_CGROUP_ITER_SELF_ONLY)
|
bpf: Introduce cgroup iter
Cgroup_iter is a type of bpf_iter. It walks over cgroups in four modes:
- walking a cgroup's descendants in pre-order.
- walking a cgroup's descendants in post-order.
- walking a cgroup's ancestors.
- process only the given cgroup.
When attaching cgroup_iter, one can set a cgroup to the iter_link
created from attaching. This cgroup is passed as a file descriptor
or cgroup id and serves as the starting point of the walk. If no
cgroup is specified, the starting point will be the root cgroup v2.
For walking descendants, one can specify the order: either pre-order or
post-order. For walking ancestors, the walk starts at the specified
cgroup and ends at the root.
One can also terminate the walk early by returning 1 from the iter
program.
Note that because walking cgroup hierarchy holds cgroup_mutex, the iter
program is called with cgroup_mutex held.
Currently only one session is supported, which means, depending on the
volume of data bpf program intends to send to user space, the number
of cgroups that can be walked is limited. For example, given the current
buffer size is 8 * PAGE_SIZE, if the program sends 64B data for each
cgroup, assuming PAGE_SIZE is 4kb, the total number of cgroups that can
be walked is 512. This is a limitation of cgroup_iter. If the output
data is larger than the kernel buffer size, after all data in the
kernel buffer is consumed by user space, the subsequent read() syscall
will signal EOPNOTSUPP. In order to work around, the user may have to
update their program to reduce the volume of data sent to output. For
example, skip some uninteresting cgroups. In future, we may extend
bpf_iter flags to allow customizing buffer size.
Acked-by: Yonghong Song <yhs@fb.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Hao Luo <haoluo@google.com>
Link: https://lore.kernel.org/r/20220824233117.1312810-2-haoluo@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2022-08-24 23:31:13 +00:00
|
|
|
return -EINVAL;
|
|
|
|
|
|
|
|
if (fd && id)
|
|
|
|
return -EINVAL;
|
|
|
|
|
|
|
|
if (fd)
|
2022-10-11 00:33:59 +00:00
|
|
|
cgrp = cgroup_v1v2_get_from_fd(fd);
|
bpf: Introduce cgroup iter
Cgroup_iter is a type of bpf_iter. It walks over cgroups in four modes:
- walking a cgroup's descendants in pre-order.
- walking a cgroup's descendants in post-order.
- walking a cgroup's ancestors.
- process only the given cgroup.
When attaching cgroup_iter, one can set a cgroup to the iter_link
created from attaching. This cgroup is passed as a file descriptor
or cgroup id and serves as the starting point of the walk. If no
cgroup is specified, the starting point will be the root cgroup v2.
For walking descendants, one can specify the order: either pre-order or
post-order. For walking ancestors, the walk starts at the specified
cgroup and ends at the root.
One can also terminate the walk early by returning 1 from the iter
program.
Note that because walking cgroup hierarchy holds cgroup_mutex, the iter
program is called with cgroup_mutex held.
Currently only one session is supported, which means, depending on the
volume of data bpf program intends to send to user space, the number
of cgroups that can be walked is limited. For example, given the current
buffer size is 8 * PAGE_SIZE, if the program sends 64B data for each
cgroup, assuming PAGE_SIZE is 4kb, the total number of cgroups that can
be walked is 512. This is a limitation of cgroup_iter. If the output
data is larger than the kernel buffer size, after all data in the
kernel buffer is consumed by user space, the subsequent read() syscall
will signal EOPNOTSUPP. In order to work around, the user may have to
update their program to reduce the volume of data sent to output. For
example, skip some uninteresting cgroups. In future, we may extend
bpf_iter flags to allow customizing buffer size.
Acked-by: Yonghong Song <yhs@fb.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Hao Luo <haoluo@google.com>
Link: https://lore.kernel.org/r/20220824233117.1312810-2-haoluo@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2022-08-24 23:31:13 +00:00
|
|
|
else if (id)
|
|
|
|
cgrp = cgroup_get_from_id(id);
|
|
|
|
else /* walk the entire hierarchy by default. */
|
|
|
|
cgrp = cgroup_get_from_path("/");
|
|
|
|
|
|
|
|
if (IS_ERR(cgrp))
|
|
|
|
return PTR_ERR(cgrp);
|
|
|
|
|
|
|
|
aux->cgroup.start = cgrp;
|
|
|
|
aux->cgroup.order = order;
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void bpf_iter_detach_cgroup(struct bpf_iter_aux_info *aux)
|
|
|
|
{
|
|
|
|
cgroup_put(aux->cgroup.start);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void bpf_iter_cgroup_show_fdinfo(const struct bpf_iter_aux_info *aux,
|
|
|
|
struct seq_file *seq)
|
|
|
|
{
|
|
|
|
char *buf;
|
|
|
|
|
|
|
|
buf = kzalloc(PATH_MAX, GFP_KERNEL);
|
|
|
|
if (!buf) {
|
|
|
|
seq_puts(seq, "cgroup_path:\t<unknown>\n");
|
|
|
|
goto show_order;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* If cgroup_path_ns() fails, buf will be an empty string, cgroup_path
|
|
|
|
* will print nothing.
|
|
|
|
*
|
|
|
|
* Path is in the calling process's cgroup namespace.
|
|
|
|
*/
|
|
|
|
cgroup_path_ns(aux->cgroup.start, buf, PATH_MAX,
|
|
|
|
current->nsproxy->cgroup_ns);
|
|
|
|
seq_printf(seq, "cgroup_path:\t%s\n", buf);
|
|
|
|
kfree(buf);
|
|
|
|
|
|
|
|
show_order:
|
2022-08-25 22:39:36 +00:00
|
|
|
if (aux->cgroup.order == BPF_CGROUP_ITER_DESCENDANTS_PRE)
|
bpf: Introduce cgroup iter
Cgroup_iter is a type of bpf_iter. It walks over cgroups in four modes:
- walking a cgroup's descendants in pre-order.
- walking a cgroup's descendants in post-order.
- walking a cgroup's ancestors.
- process only the given cgroup.
When attaching cgroup_iter, one can set a cgroup to the iter_link
created from attaching. This cgroup is passed as a file descriptor
or cgroup id and serves as the starting point of the walk. If no
cgroup is specified, the starting point will be the root cgroup v2.
For walking descendants, one can specify the order: either pre-order or
post-order. For walking ancestors, the walk starts at the specified
cgroup and ends at the root.
One can also terminate the walk early by returning 1 from the iter
program.
Note that because walking cgroup hierarchy holds cgroup_mutex, the iter
program is called with cgroup_mutex held.
Currently only one session is supported, which means, depending on the
volume of data bpf program intends to send to user space, the number
of cgroups that can be walked is limited. For example, given the current
buffer size is 8 * PAGE_SIZE, if the program sends 64B data for each
cgroup, assuming PAGE_SIZE is 4kb, the total number of cgroups that can
be walked is 512. This is a limitation of cgroup_iter. If the output
data is larger than the kernel buffer size, after all data in the
kernel buffer is consumed by user space, the subsequent read() syscall
will signal EOPNOTSUPP. In order to work around, the user may have to
update their program to reduce the volume of data sent to output. For
example, skip some uninteresting cgroups. In future, we may extend
bpf_iter flags to allow customizing buffer size.
Acked-by: Yonghong Song <yhs@fb.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Hao Luo <haoluo@google.com>
Link: https://lore.kernel.org/r/20220824233117.1312810-2-haoluo@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2022-08-24 23:31:13 +00:00
|
|
|
seq_puts(seq, "order: descendants_pre\n");
|
2022-08-25 22:39:36 +00:00
|
|
|
else if (aux->cgroup.order == BPF_CGROUP_ITER_DESCENDANTS_POST)
|
bpf: Introduce cgroup iter
Cgroup_iter is a type of bpf_iter. It walks over cgroups in four modes:
- walking a cgroup's descendants in pre-order.
- walking a cgroup's descendants in post-order.
- walking a cgroup's ancestors.
- process only the given cgroup.
When attaching cgroup_iter, one can set a cgroup to the iter_link
created from attaching. This cgroup is passed as a file descriptor
or cgroup id and serves as the starting point of the walk. If no
cgroup is specified, the starting point will be the root cgroup v2.
For walking descendants, one can specify the order: either pre-order or
post-order. For walking ancestors, the walk starts at the specified
cgroup and ends at the root.
One can also terminate the walk early by returning 1 from the iter
program.
Note that because walking cgroup hierarchy holds cgroup_mutex, the iter
program is called with cgroup_mutex held.
Currently only one session is supported, which means, depending on the
volume of data bpf program intends to send to user space, the number
of cgroups that can be walked is limited. For example, given the current
buffer size is 8 * PAGE_SIZE, if the program sends 64B data for each
cgroup, assuming PAGE_SIZE is 4kb, the total number of cgroups that can
be walked is 512. This is a limitation of cgroup_iter. If the output
data is larger than the kernel buffer size, after all data in the
kernel buffer is consumed by user space, the subsequent read() syscall
will signal EOPNOTSUPP. In order to work around, the user may have to
update their program to reduce the volume of data sent to output. For
example, skip some uninteresting cgroups. In future, we may extend
bpf_iter flags to allow customizing buffer size.
Acked-by: Yonghong Song <yhs@fb.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Hao Luo <haoluo@google.com>
Link: https://lore.kernel.org/r/20220824233117.1312810-2-haoluo@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2022-08-24 23:31:13 +00:00
|
|
|
seq_puts(seq, "order: descendants_post\n");
|
2022-08-25 22:39:36 +00:00
|
|
|
else if (aux->cgroup.order == BPF_CGROUP_ITER_ANCESTORS_UP)
|
bpf: Introduce cgroup iter
Cgroup_iter is a type of bpf_iter. It walks over cgroups in four modes:
- walking a cgroup's descendants in pre-order.
- walking a cgroup's descendants in post-order.
- walking a cgroup's ancestors.
- process only the given cgroup.
When attaching cgroup_iter, one can set a cgroup to the iter_link
created from attaching. This cgroup is passed as a file descriptor
or cgroup id and serves as the starting point of the walk. If no
cgroup is specified, the starting point will be the root cgroup v2.
For walking descendants, one can specify the order: either pre-order or
post-order. For walking ancestors, the walk starts at the specified
cgroup and ends at the root.
One can also terminate the walk early by returning 1 from the iter
program.
Note that because walking cgroup hierarchy holds cgroup_mutex, the iter
program is called with cgroup_mutex held.
Currently only one session is supported, which means, depending on the
volume of data bpf program intends to send to user space, the number
of cgroups that can be walked is limited. For example, given the current
buffer size is 8 * PAGE_SIZE, if the program sends 64B data for each
cgroup, assuming PAGE_SIZE is 4kb, the total number of cgroups that can
be walked is 512. This is a limitation of cgroup_iter. If the output
data is larger than the kernel buffer size, after all data in the
kernel buffer is consumed by user space, the subsequent read() syscall
will signal EOPNOTSUPP. In order to work around, the user may have to
update their program to reduce the volume of data sent to output. For
example, skip some uninteresting cgroups. In future, we may extend
bpf_iter flags to allow customizing buffer size.
Acked-by: Yonghong Song <yhs@fb.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Hao Luo <haoluo@google.com>
Link: https://lore.kernel.org/r/20220824233117.1312810-2-haoluo@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2022-08-24 23:31:13 +00:00
|
|
|
seq_puts(seq, "order: ancestors_up\n");
|
2022-08-25 22:39:36 +00:00
|
|
|
else /* BPF_CGROUP_ITER_SELF_ONLY */
|
bpf: Introduce cgroup iter
Cgroup_iter is a type of bpf_iter. It walks over cgroups in four modes:
- walking a cgroup's descendants in pre-order.
- walking a cgroup's descendants in post-order.
- walking a cgroup's ancestors.
- process only the given cgroup.
When attaching cgroup_iter, one can set a cgroup to the iter_link
created from attaching. This cgroup is passed as a file descriptor
or cgroup id and serves as the starting point of the walk. If no
cgroup is specified, the starting point will be the root cgroup v2.
For walking descendants, one can specify the order: either pre-order or
post-order. For walking ancestors, the walk starts at the specified
cgroup and ends at the root.
One can also terminate the walk early by returning 1 from the iter
program.
Note that because walking cgroup hierarchy holds cgroup_mutex, the iter
program is called with cgroup_mutex held.
Currently only one session is supported, which means, depending on the
volume of data bpf program intends to send to user space, the number
of cgroups that can be walked is limited. For example, given the current
buffer size is 8 * PAGE_SIZE, if the program sends 64B data for each
cgroup, assuming PAGE_SIZE is 4kb, the total number of cgroups that can
be walked is 512. This is a limitation of cgroup_iter. If the output
data is larger than the kernel buffer size, after all data in the
kernel buffer is consumed by user space, the subsequent read() syscall
will signal EOPNOTSUPP. In order to work around, the user may have to
update their program to reduce the volume of data sent to output. For
example, skip some uninteresting cgroups. In future, we may extend
bpf_iter flags to allow customizing buffer size.
Acked-by: Yonghong Song <yhs@fb.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Hao Luo <haoluo@google.com>
Link: https://lore.kernel.org/r/20220824233117.1312810-2-haoluo@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2022-08-24 23:31:13 +00:00
|
|
|
seq_puts(seq, "order: self_only\n");
|
|
|
|
}
|
|
|
|
|
|
|
|
static int bpf_iter_cgroup_fill_link_info(const struct bpf_iter_aux_info *aux,
|
|
|
|
struct bpf_link_info *info)
|
|
|
|
{
|
|
|
|
info->iter.cgroup.order = aux->cgroup.order;
|
|
|
|
info->iter.cgroup.cgroup_id = cgroup_id(aux->cgroup.start);
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
DEFINE_BPF_ITER_FUNC(cgroup, struct bpf_iter_meta *meta,
|
|
|
|
struct cgroup *cgroup)
|
|
|
|
|
|
|
|
static struct bpf_iter_reg bpf_cgroup_reg_info = {
|
|
|
|
.target = "cgroup",
|
|
|
|
.feature = BPF_ITER_RESCHED,
|
|
|
|
.attach_target = bpf_iter_attach_cgroup,
|
|
|
|
.detach_target = bpf_iter_detach_cgroup,
|
|
|
|
.show_fdinfo = bpf_iter_cgroup_show_fdinfo,
|
|
|
|
.fill_link_info = bpf_iter_cgroup_fill_link_info,
|
|
|
|
.ctx_arg_info_size = 1,
|
|
|
|
.ctx_arg_info = {
|
|
|
|
{ offsetof(struct bpf_iter__cgroup, cgroup),
|
|
|
|
PTR_TO_BTF_ID_OR_NULL },
|
|
|
|
},
|
|
|
|
.seq_info = &cgroup_iter_seq_info,
|
|
|
|
};
|
|
|
|
|
|
|
|
static int __init bpf_cgroup_iter_init(void)
|
|
|
|
{
|
|
|
|
bpf_cgroup_reg_info.ctx_arg_info[0].btf_id = bpf_cgroup_btf_id[0];
|
|
|
|
return bpf_iter_reg_target(&bpf_cgroup_reg_info);
|
|
|
|
}
|
|
|
|
|
|
|
|
late_initcall(bpf_cgroup_iter_init);
|
2023-10-18 06:17:42 +00:00
|
|
|
|
|
|
|
struct bpf_iter_css {
|
|
|
|
__u64 __opaque[3];
|
|
|
|
} __attribute__((aligned(8)));
|
|
|
|
|
|
|
|
struct bpf_iter_css_kern {
|
|
|
|
struct cgroup_subsys_state *start;
|
|
|
|
struct cgroup_subsys_state *pos;
|
|
|
|
unsigned int flags;
|
|
|
|
} __attribute__((aligned(8)));
|
|
|
|
|
2023-10-31 21:56:24 +00:00
|
|
|
__bpf_kfunc_start_defs();
|
2023-10-18 06:17:42 +00:00
|
|
|
|
|
|
|
__bpf_kfunc int bpf_iter_css_new(struct bpf_iter_css *it,
|
|
|
|
struct cgroup_subsys_state *start, unsigned int flags)
|
|
|
|
{
|
|
|
|
struct bpf_iter_css_kern *kit = (void *)it;
|
|
|
|
|
|
|
|
BUILD_BUG_ON(sizeof(struct bpf_iter_css_kern) > sizeof(struct bpf_iter_css));
|
|
|
|
BUILD_BUG_ON(__alignof__(struct bpf_iter_css_kern) != __alignof__(struct bpf_iter_css));
|
|
|
|
|
|
|
|
kit->start = NULL;
|
|
|
|
switch (flags) {
|
|
|
|
case BPF_CGROUP_ITER_DESCENDANTS_PRE:
|
|
|
|
case BPF_CGROUP_ITER_DESCENDANTS_POST:
|
|
|
|
case BPF_CGROUP_ITER_ANCESTORS_UP:
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
|
|
|
|
kit->start = start;
|
|
|
|
kit->pos = NULL;
|
|
|
|
kit->flags = flags;
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
__bpf_kfunc struct cgroup_subsys_state *bpf_iter_css_next(struct bpf_iter_css *it)
|
|
|
|
{
|
|
|
|
struct bpf_iter_css_kern *kit = (void *)it;
|
|
|
|
|
|
|
|
if (!kit->start)
|
|
|
|
return NULL;
|
|
|
|
|
|
|
|
switch (kit->flags) {
|
|
|
|
case BPF_CGROUP_ITER_DESCENDANTS_PRE:
|
|
|
|
kit->pos = css_next_descendant_pre(kit->pos, kit->start);
|
|
|
|
break;
|
|
|
|
case BPF_CGROUP_ITER_DESCENDANTS_POST:
|
|
|
|
kit->pos = css_next_descendant_post(kit->pos, kit->start);
|
|
|
|
break;
|
|
|
|
case BPF_CGROUP_ITER_ANCESTORS_UP:
|
|
|
|
kit->pos = kit->pos ? kit->pos->parent : kit->start;
|
|
|
|
}
|
|
|
|
|
|
|
|
return kit->pos;
|
|
|
|
}
|
|
|
|
|
|
|
|
__bpf_kfunc void bpf_iter_css_destroy(struct bpf_iter_css *it)
|
|
|
|
{
|
|
|
|
}
|
|
|
|
|
2023-10-31 21:56:24 +00:00
|
|
|
__bpf_kfunc_end_defs();
|