linux/Documentation/devicetree/bindings/video/analog-tv-connector.txt

Analog TV Connector
===================

Required properties:
- compatible: "composite-video-connector" or "svideo-connector"

Optional properties:
- label: a symbolic name for the connector

Required nodes:
- Video port for TV input

Example
-------

tv: connector {
	compatible = "composite-video-connector";
	label = "tv";

	port {
		tv_connector_in: endpoint {
			remote-endpoint = <&venc_out>;
		};
	};
};
Doc/DT: Add DT binding documentation for Analog TV Connector Add DT binding documentation for Analog TV Connector. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Reviewed-by: Archit Taneja <archit@ti.com> Acked-by: Philipp Zabel <p.zabel@pengutronix.de> 2014-01-21 09:17:08 +00:00			`Analog TV Connector`
			`===================`

			`Required properties:`
video: fix composite video connector compatible string The quite-recently-added analog-tv-connector bindings say that the compatible string for composite video connector is "composite-connector". That string is also used in the omap3-n900.dts file. However, the connector driver uses "composite-video-connector", so this has never worked. While changing the driver's compatible string to "composite-connector" would be safer, as published DT bindings should not be changed, I'd rather fix the bindings in this case for two reasons: * composite-connector is a bit too generic name, as it doesn't even hint at video. * it's clear that this has never worked, which means no one has used those bindings, which should make it safe to change this. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> 2014-09-02 07:17:20 +00:00			`- compatible: "composite-video-connector" or "svideo-connector"`
Doc/DT: Add DT binding documentation for Analog TV Connector Add DT binding documentation for Analog TV Connector. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Reviewed-by: Archit Taneja <archit@ti.com> Acked-by: Philipp Zabel <p.zabel@pengutronix.de> 2014-01-21 09:17:08 +00:00
			`Optional properties:`
			`- label: a symbolic name for the connector`

			`Required nodes:`
			`- Video port for TV input`

			`Example`
			`-------`

			`tv: connector {`
video: fix composite video connector compatible string The quite-recently-added analog-tv-connector bindings say that the compatible string for composite video connector is "composite-connector". That string is also used in the omap3-n900.dts file. However, the connector driver uses "composite-video-connector", so this has never worked. While changing the driver's compatible string to "composite-connector" would be safer, as published DT bindings should not be changed, I'd rather fix the bindings in this case for two reasons: * composite-connector is a bit too generic name, as it doesn't even hint at video. * it's clear that this has never worked, which means no one has used those bindings, which should make it safe to change this. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> 2014-09-02 07:17:20 +00:00			`compatible = "composite-video-connector";`
Doc/DT: Add DT binding documentation for Analog TV Connector Add DT binding documentation for Analog TV Connector. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Reviewed-by: Archit Taneja <archit@ti.com> Acked-by: Philipp Zabel <p.zabel@pengutronix.de> 2014-01-21 09:17:08 +00:00			`label = "tv";`

			`port {`
			`tv_connector_in: endpoint {`
			`remote-endpoint = <&venc_out>;`
			`};`
			`};`
			`};`