linux/fs/nfs/read.c

477 lines
12 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0-only
/*
* linux/fs/nfs/read.c
*
* Block I/O for NFS
*
* Partial copy of Linus' read cache modifications to fs/nfs/file.c
* modified for async RPC by okir@monad.swb.de
*/
#include <linux/time.h>
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/fcntl.h>
#include <linux/stat.h>
#include <linux/mm.h>
#include <linux/slab.h>
#include <linux/task_io_accounting_ops.h>
#include <linux/pagemap.h>
#include <linux/sunrpc/clnt.h>
#include <linux/nfs_fs.h>
#include <linux/nfs_page.h>
#include <linux/module.h>
#include "nfs4_fs.h"
#include "internal.h"
#include "iostat.h"
#include "fscache.h"
#include "pnfs.h"
NFS: Add static NFS I/O tracepoints Tools like tcpdump and rpcdebug can be very useful. But there are plenty of environments where they are difficult or impossible to use. For example, we've had customers report I/O failures during workloads so heavy that collecting network traffic or enabling RPC debugging are themselves onerous. The kernel's static tracepoints are lightweight (less likely to introduce timing changes) and efficient (the trace data is compact). They also work in scenarios where capturing network traffic is not possible due to lack of hardware support (some InfiniBand HCAs) or where data or network privacy is a concern. Introduce tracepoints that show when an NFS READ, WRITE, or COMMIT is initiated, and when it completes. Record the arguments and results of each operation, which are not shown by existing sunrpc module's tracepoints. For instance, the recorded offset and count can be used to match an "initiate" event to a "done" event. If an NFS READ result returns fewer bytes than requested or zero, seeing the EOF flag can be probative. Seeing an NFS4ERR_BAD_STATEID result is also indication of a particular class of problems. The timing information attached to each event record can often be useful as well. Usage example: [root@manet tmp]# trace-cmd record -e nfs:*initiate* -e nfs:*done /sys/kernel/debug/tracing/events/nfs/*initiate*/filter /sys/kernel/debug/tracing/events/nfs/*done/filter Hit Ctrl^C to stop recording ^CKernel buffer statistics: Note: "entries" are the entries left in the kernel ring buffer and are not recorded in the trace data. They should all be zero. CPU: 0 entries: 0 overrun: 0 commit overrun: 0 bytes: 3680 oldest event ts: 78.367422 now ts: 100.124419 dropped events: 0 read events: 74 ... and so on. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2017-08-21 19:00:49 +00:00
#include "nfstrace.h"
#include "delegation.h"
#define NFSDBG_FACILITY NFSDBG_PAGECACHE
NFS: Convert buffered read paths to use netfs when fscache is enabled Convert the NFS buffered read code paths to corresponding netfs APIs, but only when fscache is configured and enabled. The netfs API defines struct netfs_request_ops which must be filled in by the network filesystem. For NFS, we only need to define 5 of the functions, the main one being the issue_read() function. The issue_read() function is called by the netfs layer when a read cannot be fulfilled locally, and must be sent to the server (either the cache is not active, or it is active but the data is not available). Once the read from the server is complete, netfs requires a call to netfs_subreq_terminated() which conveys either how many bytes were read successfully, or an error. Note that issue_read() is called with a structure, netfs_io_subrequest, which defines the IO requested, and contains a start and a length (both in bytes), and assumes the underlying netfs will return a either an error on the whole region, or the number of bytes successfully read. The NFS IO path is page based and the main APIs are the pgio APIs defined in pagelist.c. For the pgio APIs, there is no way for the caller to know how many RPCs will be sent and how the pages will be broken up into underlying RPCs, each of which will have their own completion and return code. In contrast, netfs is subrequest based, a single subrequest may contain multiple pages, and a single subrequest is initiated with issue_read() and terminated with netfs_subreq_terminated(). Thus, to utilze the netfs APIs, NFS needs some way to accommodate the netfs API requirement on the single response to the whole subrequest, while also minimizing disruptive changes to the NFS pgio layer. The approach taken with this patch is to allocate a small structure for each nfs_netfs_issue_read() call, store the final error and number of bytes successfully transferred in the structure, and update these values as each RPC completes. The refcount on the structure is used as a marker for the last RPC completion, is incremented in nfs_netfs_read_initiate(), and decremented inside nfs_netfs_read_completion(), when a nfs_pgio_header contains a valid pointer to the data. On the final put (which signals the final outstanding RPC is complete) in nfs_netfs_read_completion(), call netfs_subreq_terminated() with either the final error value (if one or more READs complete with an error) or the number of bytes successfully transferred (if all RPCs complete successfully). Note that when all RPCs complete successfully, the number of bytes transferred is capped to the length of the subrequest. Capping the transferred length to the subrequest length prevents "Subreq overread" warnings from netfs. This is due to the "aligned_len" in nfs_pageio_add_page(), and the corner case where NFS requests a full page at the end of the file, even when i_size reflects only a partial page (NFS overread). Signed-off-by: Dave Wysochanski <dwysocha@redhat.com> Tested-by: Daire Byrne <daire@dneg.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2023-02-20 13:43:06 +00:00
const struct nfs_pgio_completion_ops nfs_async_read_completion_ops;
static const struct nfs_rw_ops nfs_rw_read_ops;
static struct kmem_cache *nfs_rdata_cachep;
static struct nfs_pgio_header *nfs_readhdr_alloc(void)
{
struct nfs_pgio_header *p = kmem_cache_zalloc(nfs_rdata_cachep, GFP_KERNEL);
if (p)
p->rw_mode = FMODE_READ;
return p;
}
static void nfs_readhdr_free(struct nfs_pgio_header *rhdr)
{
if (rhdr->res.scratch != NULL)
kfree(rhdr->res.scratch);
kmem_cache_free(nfs_rdata_cachep, rhdr);
}
static int nfs_return_empty_folio(struct folio *folio)
{
folio_zero_segment(folio, 0, folio_size(folio));
folio_mark_uptodate(folio);
folio_unlock(folio);
return 0;
}
void nfs_pageio_init_read(struct nfs_pageio_descriptor *pgio,
struct inode *inode, bool force_mds,
const struct nfs_pgio_completion_ops *compl_ops)
{
struct nfs_server *server = NFS_SERVER(inode);
const struct nfs_pageio_ops *pg_ops = &nfs_pgio_rw_ops;
#ifdef CONFIG_NFS_V4_1
if (server->pnfs_curr_ld && !force_mds)
pg_ops = server->pnfs_curr_ld->pg_read_ops;
#endif
nfs_pageio_init(pgio, inode, pg_ops, compl_ops, &nfs_rw_read_ops,
server->rsize, 0);
}
EXPORT_SYMBOL_GPL(nfs_pageio_init_read);
NFS: Convert buffered read paths to use netfs when fscache is enabled Convert the NFS buffered read code paths to corresponding netfs APIs, but only when fscache is configured and enabled. The netfs API defines struct netfs_request_ops which must be filled in by the network filesystem. For NFS, we only need to define 5 of the functions, the main one being the issue_read() function. The issue_read() function is called by the netfs layer when a read cannot be fulfilled locally, and must be sent to the server (either the cache is not active, or it is active but the data is not available). Once the read from the server is complete, netfs requires a call to netfs_subreq_terminated() which conveys either how many bytes were read successfully, or an error. Note that issue_read() is called with a structure, netfs_io_subrequest, which defines the IO requested, and contains a start and a length (both in bytes), and assumes the underlying netfs will return a either an error on the whole region, or the number of bytes successfully read. The NFS IO path is page based and the main APIs are the pgio APIs defined in pagelist.c. For the pgio APIs, there is no way for the caller to know how many RPCs will be sent and how the pages will be broken up into underlying RPCs, each of which will have their own completion and return code. In contrast, netfs is subrequest based, a single subrequest may contain multiple pages, and a single subrequest is initiated with issue_read() and terminated with netfs_subreq_terminated(). Thus, to utilze the netfs APIs, NFS needs some way to accommodate the netfs API requirement on the single response to the whole subrequest, while also minimizing disruptive changes to the NFS pgio layer. The approach taken with this patch is to allocate a small structure for each nfs_netfs_issue_read() call, store the final error and number of bytes successfully transferred in the structure, and update these values as each RPC completes. The refcount on the structure is used as a marker for the last RPC completion, is incremented in nfs_netfs_read_initiate(), and decremented inside nfs_netfs_read_completion(), when a nfs_pgio_header contains a valid pointer to the data. On the final put (which signals the final outstanding RPC is complete) in nfs_netfs_read_completion(), call netfs_subreq_terminated() with either the final error value (if one or more READs complete with an error) or the number of bytes successfully transferred (if all RPCs complete successfully). Note that when all RPCs complete successfully, the number of bytes transferred is capped to the length of the subrequest. Capping the transferred length to the subrequest length prevents "Subreq overread" warnings from netfs. This is due to the "aligned_len" in nfs_pageio_add_page(), and the corner case where NFS requests a full page at the end of the file, even when i_size reflects only a partial page (NFS overread). Signed-off-by: Dave Wysochanski <dwysocha@redhat.com> Tested-by: Daire Byrne <daire@dneg.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2023-02-20 13:43:06 +00:00
void nfs_pageio_complete_read(struct nfs_pageio_descriptor *pgio)
{
struct nfs_pgio_mirror *pgm;
unsigned long npages;
nfs_pageio_complete(pgio);
/* It doesn't make sense to do mirrored reads! */
WARN_ON_ONCE(pgio->pg_mirror_count != 1);
pgm = &pgio->pg_mirrors[0];
NFS_I(pgio->pg_inode)->read_io += pgm->pg_bytes_written;
npages = (pgm->pg_bytes_written + PAGE_SIZE - 1) >> PAGE_SHIFT;
nfs_add_stats(pgio->pg_inode, NFSIOS_READPAGES, npages);
}
void nfs_pageio_reset_read_mds(struct nfs_pageio_descriptor *pgio)
{
struct nfs_pgio_mirror *mirror;
if (pgio->pg_ops && pgio->pg_ops->pg_cleanup)
pgio->pg_ops->pg_cleanup(pgio);
pgio->pg_ops = &nfs_pgio_rw_ops;
/* read path should never have more than one mirror */
WARN_ON_ONCE(pgio->pg_mirror_count != 1);
mirror = &pgio->pg_mirrors[0];
mirror->pg_bsize = NFS_SERVER(pgio->pg_inode)->rsize;
}
EXPORT_SYMBOL_GPL(nfs_pageio_reset_read_mds);
bool nfs_read_alloc_scratch(struct nfs_pgio_header *hdr, size_t size)
{
WARN_ON(hdr->res.scratch != NULL);
hdr->res.scratch = kmalloc(size, GFP_KERNEL);
return hdr->res.scratch != NULL;
}
EXPORT_SYMBOL_GPL(nfs_read_alloc_scratch);
static void nfs_readpage_release(struct nfs_page *req, int error)
{
struct folio *folio = nfs_page_to_folio(req);
NFS: Convert buffered read paths to use netfs when fscache is enabled Convert the NFS buffered read code paths to corresponding netfs APIs, but only when fscache is configured and enabled. The netfs API defines struct netfs_request_ops which must be filled in by the network filesystem. For NFS, we only need to define 5 of the functions, the main one being the issue_read() function. The issue_read() function is called by the netfs layer when a read cannot be fulfilled locally, and must be sent to the server (either the cache is not active, or it is active but the data is not available). Once the read from the server is complete, netfs requires a call to netfs_subreq_terminated() which conveys either how many bytes were read successfully, or an error. Note that issue_read() is called with a structure, netfs_io_subrequest, which defines the IO requested, and contains a start and a length (both in bytes), and assumes the underlying netfs will return a either an error on the whole region, or the number of bytes successfully read. The NFS IO path is page based and the main APIs are the pgio APIs defined in pagelist.c. For the pgio APIs, there is no way for the caller to know how many RPCs will be sent and how the pages will be broken up into underlying RPCs, each of which will have their own completion and return code. In contrast, netfs is subrequest based, a single subrequest may contain multiple pages, and a single subrequest is initiated with issue_read() and terminated with netfs_subreq_terminated(). Thus, to utilze the netfs APIs, NFS needs some way to accommodate the netfs API requirement on the single response to the whole subrequest, while also minimizing disruptive changes to the NFS pgio layer. The approach taken with this patch is to allocate a small structure for each nfs_netfs_issue_read() call, store the final error and number of bytes successfully transferred in the structure, and update these values as each RPC completes. The refcount on the structure is used as a marker for the last RPC completion, is incremented in nfs_netfs_read_initiate(), and decremented inside nfs_netfs_read_completion(), when a nfs_pgio_header contains a valid pointer to the data. On the final put (which signals the final outstanding RPC is complete) in nfs_netfs_read_completion(), call netfs_subreq_terminated() with either the final error value (if one or more READs complete with an error) or the number of bytes successfully transferred (if all RPCs complete successfully). Note that when all RPCs complete successfully, the number of bytes transferred is capped to the length of the subrequest. Capping the transferred length to the subrequest length prevents "Subreq overread" warnings from netfs. This is due to the "aligned_len" in nfs_pageio_add_page(), and the corner case where NFS requests a full page at the end of the file, even when i_size reflects only a partial page (NFS overread). Signed-off-by: Dave Wysochanski <dwysocha@redhat.com> Tested-by: Daire Byrne <daire@dneg.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2023-02-20 13:43:06 +00:00
if (nfs_page_group_sync_on_bit(req, PG_UNLOCKPAGE))
if (nfs_netfs_folio_unlock(folio))
folio_unlock(folio);
nfs_release_request(req);
}
static void nfs_page_group_set_uptodate(struct nfs_page *req)
{
if (nfs_page_group_sync_on_bit(req, PG_UPTODATE))
folio_mark_uptodate(nfs_page_to_folio(req));
}
static void nfs_read_completion(struct nfs_pgio_header *hdr)
{
unsigned long bytes = 0;
int error;
if (test_bit(NFS_IOHDR_REDO, &hdr->flags))
goto out;
while (!list_empty(&hdr->pages)) {
struct nfs_page *req = nfs_list_entry(hdr->pages.next);
struct folio *folio = nfs_page_to_folio(req);
unsigned long start = req->wb_pgbase;
unsigned long end = req->wb_pgbase + req->wb_bytes;
if (test_bit(NFS_IOHDR_EOF, &hdr->flags)) {
/* note: regions of the page not covered by a
* request are zeroed in nfs_read_add_folio
*/
if (bytes > hdr->good_bytes) {
/* nothing in this request was good, so zero
* the full extent of the request */
folio_zero_segment(folio, start, end);
} else if (hdr->good_bytes - bytes < req->wb_bytes) {
/* part of this request has good bytes, but
* not all. zero the bad bytes */
start += hdr->good_bytes - bytes;
WARN_ON(start < req->wb_pgbase);
folio_zero_segment(folio, start, end);
}
}
error = 0;
bytes += req->wb_bytes;
if (test_bit(NFS_IOHDR_ERROR, &hdr->flags)) {
if (bytes <= hdr->good_bytes)
nfs_page_group_set_uptodate(req);
else {
error = hdr->error;
xchg(&nfs_req_openctx(req)->error, error);
}
} else
nfs_page_group_set_uptodate(req);
nfs_list_remove_request(req);
nfs_readpage_release(req, error);
}
NFS: Convert buffered read paths to use netfs when fscache is enabled Convert the NFS buffered read code paths to corresponding netfs APIs, but only when fscache is configured and enabled. The netfs API defines struct netfs_request_ops which must be filled in by the network filesystem. For NFS, we only need to define 5 of the functions, the main one being the issue_read() function. The issue_read() function is called by the netfs layer when a read cannot be fulfilled locally, and must be sent to the server (either the cache is not active, or it is active but the data is not available). Once the read from the server is complete, netfs requires a call to netfs_subreq_terminated() which conveys either how many bytes were read successfully, or an error. Note that issue_read() is called with a structure, netfs_io_subrequest, which defines the IO requested, and contains a start and a length (both in bytes), and assumes the underlying netfs will return a either an error on the whole region, or the number of bytes successfully read. The NFS IO path is page based and the main APIs are the pgio APIs defined in pagelist.c. For the pgio APIs, there is no way for the caller to know how many RPCs will be sent and how the pages will be broken up into underlying RPCs, each of which will have their own completion and return code. In contrast, netfs is subrequest based, a single subrequest may contain multiple pages, and a single subrequest is initiated with issue_read() and terminated with netfs_subreq_terminated(). Thus, to utilze the netfs APIs, NFS needs some way to accommodate the netfs API requirement on the single response to the whole subrequest, while also minimizing disruptive changes to the NFS pgio layer. The approach taken with this patch is to allocate a small structure for each nfs_netfs_issue_read() call, store the final error and number of bytes successfully transferred in the structure, and update these values as each RPC completes. The refcount on the structure is used as a marker for the last RPC completion, is incremented in nfs_netfs_read_initiate(), and decremented inside nfs_netfs_read_completion(), when a nfs_pgio_header contains a valid pointer to the data. On the final put (which signals the final outstanding RPC is complete) in nfs_netfs_read_completion(), call netfs_subreq_terminated() with either the final error value (if one or more READs complete with an error) or the number of bytes successfully transferred (if all RPCs complete successfully). Note that when all RPCs complete successfully, the number of bytes transferred is capped to the length of the subrequest. Capping the transferred length to the subrequest length prevents "Subreq overread" warnings from netfs. This is due to the "aligned_len" in nfs_pageio_add_page(), and the corner case where NFS requests a full page at the end of the file, even when i_size reflects only a partial page (NFS overread). Signed-off-by: Dave Wysochanski <dwysocha@redhat.com> Tested-by: Daire Byrne <daire@dneg.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2023-02-20 13:43:06 +00:00
nfs_netfs_read_completion(hdr);
out:
hdr->release(hdr);
}
static void nfs_initiate_read(struct nfs_pgio_header *hdr,
struct rpc_message *msg,
const struct nfs_rpc_ops *rpc_ops,
struct rpc_task_setup *task_setup_data, int how)
{
rpc_ops->read_setup(hdr, msg);
NFS: Convert buffered read paths to use netfs when fscache is enabled Convert the NFS buffered read code paths to corresponding netfs APIs, but only when fscache is configured and enabled. The netfs API defines struct netfs_request_ops which must be filled in by the network filesystem. For NFS, we only need to define 5 of the functions, the main one being the issue_read() function. The issue_read() function is called by the netfs layer when a read cannot be fulfilled locally, and must be sent to the server (either the cache is not active, or it is active but the data is not available). Once the read from the server is complete, netfs requires a call to netfs_subreq_terminated() which conveys either how many bytes were read successfully, or an error. Note that issue_read() is called with a structure, netfs_io_subrequest, which defines the IO requested, and contains a start and a length (both in bytes), and assumes the underlying netfs will return a either an error on the whole region, or the number of bytes successfully read. The NFS IO path is page based and the main APIs are the pgio APIs defined in pagelist.c. For the pgio APIs, there is no way for the caller to know how many RPCs will be sent and how the pages will be broken up into underlying RPCs, each of which will have their own completion and return code. In contrast, netfs is subrequest based, a single subrequest may contain multiple pages, and a single subrequest is initiated with issue_read() and terminated with netfs_subreq_terminated(). Thus, to utilze the netfs APIs, NFS needs some way to accommodate the netfs API requirement on the single response to the whole subrequest, while also minimizing disruptive changes to the NFS pgio layer. The approach taken with this patch is to allocate a small structure for each nfs_netfs_issue_read() call, store the final error and number of bytes successfully transferred in the structure, and update these values as each RPC completes. The refcount on the structure is used as a marker for the last RPC completion, is incremented in nfs_netfs_read_initiate(), and decremented inside nfs_netfs_read_completion(), when a nfs_pgio_header contains a valid pointer to the data. On the final put (which signals the final outstanding RPC is complete) in nfs_netfs_read_completion(), call netfs_subreq_terminated() with either the final error value (if one or more READs complete with an error) or the number of bytes successfully transferred (if all RPCs complete successfully). Note that when all RPCs complete successfully, the number of bytes transferred is capped to the length of the subrequest. Capping the transferred length to the subrequest length prevents "Subreq overread" warnings from netfs. This is due to the "aligned_len" in nfs_pageio_add_page(), and the corner case where NFS requests a full page at the end of the file, even when i_size reflects only a partial page (NFS overread). Signed-off-by: Dave Wysochanski <dwysocha@redhat.com> Tested-by: Daire Byrne <daire@dneg.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2023-02-20 13:43:06 +00:00
nfs_netfs_initiate_read(hdr);
trace_nfs_initiate_read(hdr);
}
static void
nfs_async_read_error(struct list_head *head, int error)
{
struct nfs_page *req;
while (!list_empty(head)) {
req = nfs_list_entry(head->next);
nfs_list_remove_request(req);
nfs_readpage_release(req, error);
}
}
NFS: Convert buffered read paths to use netfs when fscache is enabled Convert the NFS buffered read code paths to corresponding netfs APIs, but only when fscache is configured and enabled. The netfs API defines struct netfs_request_ops which must be filled in by the network filesystem. For NFS, we only need to define 5 of the functions, the main one being the issue_read() function. The issue_read() function is called by the netfs layer when a read cannot be fulfilled locally, and must be sent to the server (either the cache is not active, or it is active but the data is not available). Once the read from the server is complete, netfs requires a call to netfs_subreq_terminated() which conveys either how many bytes were read successfully, or an error. Note that issue_read() is called with a structure, netfs_io_subrequest, which defines the IO requested, and contains a start and a length (both in bytes), and assumes the underlying netfs will return a either an error on the whole region, or the number of bytes successfully read. The NFS IO path is page based and the main APIs are the pgio APIs defined in pagelist.c. For the pgio APIs, there is no way for the caller to know how many RPCs will be sent and how the pages will be broken up into underlying RPCs, each of which will have their own completion and return code. In contrast, netfs is subrequest based, a single subrequest may contain multiple pages, and a single subrequest is initiated with issue_read() and terminated with netfs_subreq_terminated(). Thus, to utilze the netfs APIs, NFS needs some way to accommodate the netfs API requirement on the single response to the whole subrequest, while also minimizing disruptive changes to the NFS pgio layer. The approach taken with this patch is to allocate a small structure for each nfs_netfs_issue_read() call, store the final error and number of bytes successfully transferred in the structure, and update these values as each RPC completes. The refcount on the structure is used as a marker for the last RPC completion, is incremented in nfs_netfs_read_initiate(), and decremented inside nfs_netfs_read_completion(), when a nfs_pgio_header contains a valid pointer to the data. On the final put (which signals the final outstanding RPC is complete) in nfs_netfs_read_completion(), call netfs_subreq_terminated() with either the final error value (if one or more READs complete with an error) or the number of bytes successfully transferred (if all RPCs complete successfully). Note that when all RPCs complete successfully, the number of bytes transferred is capped to the length of the subrequest. Capping the transferred length to the subrequest length prevents "Subreq overread" warnings from netfs. This is due to the "aligned_len" in nfs_pageio_add_page(), and the corner case where NFS requests a full page at the end of the file, even when i_size reflects only a partial page (NFS overread). Signed-off-by: Dave Wysochanski <dwysocha@redhat.com> Tested-by: Daire Byrne <daire@dneg.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2023-02-20 13:43:06 +00:00
const struct nfs_pgio_completion_ops nfs_async_read_completion_ops = {
.error_cleanup = nfs_async_read_error,
.completion = nfs_read_completion,
};
/*
* This is the callback from RPC telling us whether a reply was
* received or some error occurred (timeout or socket shutdown).
*/
static int nfs_readpage_done(struct rpc_task *task,
struct nfs_pgio_header *hdr,
struct inode *inode)
{
int status = NFS_PROTO(inode)->read_done(task, hdr);
if (status != 0)
return status;
nfs_add_stats(inode, NFSIOS_SERVERREADBYTES, hdr->res.count);
trace_nfs_readpage_done(task, hdr);
if (task->tk_status == -ESTALE) {
nfs_set_inode_stale(inode);
nfs_mark_for_revalidate(inode);
}
return 0;
}
static void nfs_readpage_retry(struct rpc_task *task,
struct nfs_pgio_header *hdr)
{
struct nfs_pgio_args *argp = &hdr->args;
struct nfs_pgio_res *resp = &hdr->res;
/* This is a short read! */
nfs_inc_stats(hdr->inode, NFSIOS_SHORTREAD);
trace_nfs_readpage_short(task, hdr);
/* Has the server at least made some progress? */
if (resp->count == 0) {
nfs_set_pgio_error(hdr, -EIO, argp->offset);
return;
}
NFSv4.1/pnfs: Retry through MDS when getting bad length of data If non rpc-based layout driver return bad length of data, nfs retries by calling rpc_restart_call_prepare() that cause an NULL reference panic. This patch lets nfs retry through MDS for non rpc-based layout driver return bad length of data. [13034.883329] BUG: unable to handle kernel NULL pointer dereference at (null) [13034.884902] IP: [<ffffffffa00db372>] rpc_restart_call_prepare+0x62/0x90 [sunrpc] [13034.886558] PGD 0 [13034.888126] Oops: 0000 [#1] KASAN [13034.889710] Modules linked in: blocklayoutdriver(OE) nfsv4(OE) nfs(OE) fscache(E) nfsd(OE) xfs libcrc32c coretemp btrfs crct10dif_pclmul crc32_pclmul crc32c_intel ghash_clmulni_intel ppdev vmw_balloon auth_rpcgss shpchp nfs_acl lockd vmw_vmci parport_pc xor raid6_pq grace parport sunrpc i2c_piix4 vmwgfx drm_kms_helper ttm drm mptspi e1000 serio_raw scsi_transport_spi mptscsih mptbase ata_generic pata_acpi [last unloaded: fscache] [13034.898260] CPU: 0 PID: 10112 Comm: kworker/0:1 Tainted: G OE 4.3.0-rc5+ #279 [13034.899932] Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 07/02/2015 [13034.903342] Workqueue: events bl_read_cleanup [blocklayoutdriver] [13034.905059] task: ffff88006a9148c0 ti: ffff880035e90000 task.ti: ffff880035e90000 [13034.906827] RIP: 0010:[<ffffffffa00db372>] [<ffffffffa00db372>] rpc_restart_call_prepare+0x62/0x90 [sunrpc] [13034.910522] RSP: 0018:ffff880035e97b58 EFLAGS: 00010282 [13034.912378] RAX: fffffbfff04a5a94 RBX: ffff880068fe4858 RCX: 0000000000000003 [13034.914339] RDX: dffffc0000000000 RSI: 0000000000000003 RDI: 0000000000000282 [13034.916236] RBP: ffff880035e97b68 R08: 0000000000000001 R09: 0000000000000001 [13034.918229] R10: 0000000000000000 R11: 0000000000000001 R12: 0000000000000000 [13034.920007] R13: ffff880068fe4858 R14: ffff880068fe4a60 R15: 0000000000001000 [13034.921845] FS: 0000000000000000(0000) GS:ffffffff82247000(0000) knlGS:0000000000000000 [13034.923645] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [13034.925525] CR2: 0000000000000000 CR3: 00000000063dd000 CR4: 00000000001406f0 [13034.932808] Stack: [13034.934813] ffff880068fe4780 0000000000001000 ffff880035e97ba8 ffffffffa08800d2 [13034.936675] ffffffffa088029d ffff880068fe4780 ffff880068fe4858 ffffffffa089c0a0 [13034.938593] ffff880068fe47e0 ffff88005d59faf0 ffff880035e97be0 ffffffffa087e08f [13034.940454] Call Trace: [13034.942388] [<ffffffffa08800d2>] nfs_readpage_result+0x112/0x200 [nfs] [13034.944317] [<ffffffffa088029d>] ? nfs_readpage_done+0xdd/0x160 [nfs] [13034.946267] [<ffffffffa087e08f>] nfs_pgio_result+0x9f/0x120 [nfs] [13034.948166] [<ffffffffa09266cc>] pnfs_ld_read_done+0x7c/0x1e0 [nfsv4] [13034.950247] [<ffffffffa03b07ee>] bl_read_cleanup+0x2e/0x60 [blocklayoutdriver] [13034.952156] [<ffffffff810ebf62>] process_one_work+0x412/0x870 [13034.954102] [<ffffffff810ebe84>] ? process_one_work+0x334/0x870 [13034.955949] [<ffffffff810ebb50>] ? queue_delayed_work_on+0x40/0x40 [13034.957985] [<ffffffff810ec441>] worker_thread+0x81/0x6a0 [13034.959817] [<ffffffff810ec3c0>] ? process_one_work+0x870/0x870 [13034.961785] [<ffffffff810f43bd>] kthread+0x17d/0x1a0 [13034.963544] [<ffffffff810f4240>] ? kthread_create_on_node+0x330/0x330 [13034.965479] [<ffffffff81100428>] ? finish_task_switch+0x88/0x220 [13034.967223] [<ffffffff810f4240>] ? kthread_create_on_node+0x330/0x330 [13034.968929] [<ffffffff81b6ae5f>] ret_from_fork+0x3f/0x70 [13034.970534] [<ffffffff810f4240>] ? kthread_create_on_node+0x330/0x330 [13034.972176] Code: c7 43 50 40 84 0d a0 e8 3d fe 1c e1 48 8d 7b 58 c7 83 e4 00 00 00 00 00 00 00 e8 ca fe 1c e1 4c 8b 63 58 4c 89 e7 e8 be fe 1c e1 <49> 83 3c 24 00 74 12 48 c7 43 50 f0 a2 0e a0 b8 01 00 00 00 5b [13034.977148] RIP [<ffffffffa00db372>] rpc_restart_call_prepare+0x62/0x90 [sunrpc] [13034.978780] RSP <ffff880035e97b58> [13034.980399] CR2: 0000000000000000 Signed-off-by: Kinglong Mee <kinglongmee@gmail.com> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2015-10-16 09:23:29 +00:00
/* For non rpc-based layout drivers, retry-through-MDS */
if (!task->tk_ops) {
hdr->pnfs_error = -EAGAIN;
return;
}
/* Yes, so retry the read at the end of the hdr */
hdr->mds_offset += resp->count;
argp->offset += resp->count;
argp->pgbase += resp->count;
argp->count -= resp->count;
resp->count = 0;
resp->eof = 0;
rpc_restart_call_prepare(task);
}
static void nfs_readpage_result(struct rpc_task *task,
struct nfs_pgio_header *hdr)
{
if (hdr->res.eof) {
loff_t pos = hdr->args.offset + hdr->res.count;
unsigned int new = pos - hdr->io_start;
if (hdr->good_bytes > new) {
hdr->good_bytes = new;
set_bit(NFS_IOHDR_EOF, &hdr->flags);
clear_bit(NFS_IOHDR_ERROR, &hdr->flags);
}
NFSv4.1/pnfs: Retry through MDS when getting bad length of data If non rpc-based layout driver return bad length of data, nfs retries by calling rpc_restart_call_prepare() that cause an NULL reference panic. This patch lets nfs retry through MDS for non rpc-based layout driver return bad length of data. [13034.883329] BUG: unable to handle kernel NULL pointer dereference at (null) [13034.884902] IP: [<ffffffffa00db372>] rpc_restart_call_prepare+0x62/0x90 [sunrpc] [13034.886558] PGD 0 [13034.888126] Oops: 0000 [#1] KASAN [13034.889710] Modules linked in: blocklayoutdriver(OE) nfsv4(OE) nfs(OE) fscache(E) nfsd(OE) xfs libcrc32c coretemp btrfs crct10dif_pclmul crc32_pclmul crc32c_intel ghash_clmulni_intel ppdev vmw_balloon auth_rpcgss shpchp nfs_acl lockd vmw_vmci parport_pc xor raid6_pq grace parport sunrpc i2c_piix4 vmwgfx drm_kms_helper ttm drm mptspi e1000 serio_raw scsi_transport_spi mptscsih mptbase ata_generic pata_acpi [last unloaded: fscache] [13034.898260] CPU: 0 PID: 10112 Comm: kworker/0:1 Tainted: G OE 4.3.0-rc5+ #279 [13034.899932] Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 07/02/2015 [13034.903342] Workqueue: events bl_read_cleanup [blocklayoutdriver] [13034.905059] task: ffff88006a9148c0 ti: ffff880035e90000 task.ti: ffff880035e90000 [13034.906827] RIP: 0010:[<ffffffffa00db372>] [<ffffffffa00db372>] rpc_restart_call_prepare+0x62/0x90 [sunrpc] [13034.910522] RSP: 0018:ffff880035e97b58 EFLAGS: 00010282 [13034.912378] RAX: fffffbfff04a5a94 RBX: ffff880068fe4858 RCX: 0000000000000003 [13034.914339] RDX: dffffc0000000000 RSI: 0000000000000003 RDI: 0000000000000282 [13034.916236] RBP: ffff880035e97b68 R08: 0000000000000001 R09: 0000000000000001 [13034.918229] R10: 0000000000000000 R11: 0000000000000001 R12: 0000000000000000 [13034.920007] R13: ffff880068fe4858 R14: ffff880068fe4a60 R15: 0000000000001000 [13034.921845] FS: 0000000000000000(0000) GS:ffffffff82247000(0000) knlGS:0000000000000000 [13034.923645] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [13034.925525] CR2: 0000000000000000 CR3: 00000000063dd000 CR4: 00000000001406f0 [13034.932808] Stack: [13034.934813] ffff880068fe4780 0000000000001000 ffff880035e97ba8 ffffffffa08800d2 [13034.936675] ffffffffa088029d ffff880068fe4780 ffff880068fe4858 ffffffffa089c0a0 [13034.938593] ffff880068fe47e0 ffff88005d59faf0 ffff880035e97be0 ffffffffa087e08f [13034.940454] Call Trace: [13034.942388] [<ffffffffa08800d2>] nfs_readpage_result+0x112/0x200 [nfs] [13034.944317] [<ffffffffa088029d>] ? nfs_readpage_done+0xdd/0x160 [nfs] [13034.946267] [<ffffffffa087e08f>] nfs_pgio_result+0x9f/0x120 [nfs] [13034.948166] [<ffffffffa09266cc>] pnfs_ld_read_done+0x7c/0x1e0 [nfsv4] [13034.950247] [<ffffffffa03b07ee>] bl_read_cleanup+0x2e/0x60 [blocklayoutdriver] [13034.952156] [<ffffffff810ebf62>] process_one_work+0x412/0x870 [13034.954102] [<ffffffff810ebe84>] ? process_one_work+0x334/0x870 [13034.955949] [<ffffffff810ebb50>] ? queue_delayed_work_on+0x40/0x40 [13034.957985] [<ffffffff810ec441>] worker_thread+0x81/0x6a0 [13034.959817] [<ffffffff810ec3c0>] ? process_one_work+0x870/0x870 [13034.961785] [<ffffffff810f43bd>] kthread+0x17d/0x1a0 [13034.963544] [<ffffffff810f4240>] ? kthread_create_on_node+0x330/0x330 [13034.965479] [<ffffffff81100428>] ? finish_task_switch+0x88/0x220 [13034.967223] [<ffffffff810f4240>] ? kthread_create_on_node+0x330/0x330 [13034.968929] [<ffffffff81b6ae5f>] ret_from_fork+0x3f/0x70 [13034.970534] [<ffffffff810f4240>] ? kthread_create_on_node+0x330/0x330 [13034.972176] Code: c7 43 50 40 84 0d a0 e8 3d fe 1c e1 48 8d 7b 58 c7 83 e4 00 00 00 00 00 00 00 e8 ca fe 1c e1 4c 8b 63 58 4c 89 e7 e8 be fe 1c e1 <49> 83 3c 24 00 74 12 48 c7 43 50 f0 a2 0e a0 b8 01 00 00 00 5b [13034.977148] RIP [<ffffffffa00db372>] rpc_restart_call_prepare+0x62/0x90 [sunrpc] [13034.978780] RSP <ffff880035e97b58> [13034.980399] CR2: 0000000000000000 Signed-off-by: Kinglong Mee <kinglongmee@gmail.com> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2015-10-16 09:23:29 +00:00
} else if (hdr->res.count < hdr->args.count)
nfs_readpage_retry(task, hdr);
}
NFS: Convert buffered read paths to use netfs when fscache is enabled Convert the NFS buffered read code paths to corresponding netfs APIs, but only when fscache is configured and enabled. The netfs API defines struct netfs_request_ops which must be filled in by the network filesystem. For NFS, we only need to define 5 of the functions, the main one being the issue_read() function. The issue_read() function is called by the netfs layer when a read cannot be fulfilled locally, and must be sent to the server (either the cache is not active, or it is active but the data is not available). Once the read from the server is complete, netfs requires a call to netfs_subreq_terminated() which conveys either how many bytes were read successfully, or an error. Note that issue_read() is called with a structure, netfs_io_subrequest, which defines the IO requested, and contains a start and a length (both in bytes), and assumes the underlying netfs will return a either an error on the whole region, or the number of bytes successfully read. The NFS IO path is page based and the main APIs are the pgio APIs defined in pagelist.c. For the pgio APIs, there is no way for the caller to know how many RPCs will be sent and how the pages will be broken up into underlying RPCs, each of which will have their own completion and return code. In contrast, netfs is subrequest based, a single subrequest may contain multiple pages, and a single subrequest is initiated with issue_read() and terminated with netfs_subreq_terminated(). Thus, to utilze the netfs APIs, NFS needs some way to accommodate the netfs API requirement on the single response to the whole subrequest, while also minimizing disruptive changes to the NFS pgio layer. The approach taken with this patch is to allocate a small structure for each nfs_netfs_issue_read() call, store the final error and number of bytes successfully transferred in the structure, and update these values as each RPC completes. The refcount on the structure is used as a marker for the last RPC completion, is incremented in nfs_netfs_read_initiate(), and decremented inside nfs_netfs_read_completion(), when a nfs_pgio_header contains a valid pointer to the data. On the final put (which signals the final outstanding RPC is complete) in nfs_netfs_read_completion(), call netfs_subreq_terminated() with either the final error value (if one or more READs complete with an error) or the number of bytes successfully transferred (if all RPCs complete successfully). Note that when all RPCs complete successfully, the number of bytes transferred is capped to the length of the subrequest. Capping the transferred length to the subrequest length prevents "Subreq overread" warnings from netfs. This is due to the "aligned_len" in nfs_pageio_add_page(), and the corner case where NFS requests a full page at the end of the file, even when i_size reflects only a partial page (NFS overread). Signed-off-by: Dave Wysochanski <dwysocha@redhat.com> Tested-by: Daire Byrne <daire@dneg.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2023-02-20 13:43:06 +00:00
int nfs_read_add_folio(struct nfs_pageio_descriptor *pgio,
struct nfs_open_context *ctx,
struct folio *folio)
{
struct inode *inode = folio->mapping->host;
struct nfs_server *server = NFS_SERVER(inode);
size_t fsize = folio_size(folio);
unsigned int rsize = server->rsize;
struct nfs_page *new;
unsigned int len, aligned_len;
int error;
len = nfs_folio_length(folio);
if (len == 0)
return nfs_return_empty_folio(folio);
aligned_len = min_t(unsigned int, ALIGN(len, rsize), fsize);
new = nfs_page_create_from_folio(ctx, folio, 0, aligned_len);
NFS: Convert buffered read paths to use netfs when fscache is enabled Convert the NFS buffered read code paths to corresponding netfs APIs, but only when fscache is configured and enabled. The netfs API defines struct netfs_request_ops which must be filled in by the network filesystem. For NFS, we only need to define 5 of the functions, the main one being the issue_read() function. The issue_read() function is called by the netfs layer when a read cannot be fulfilled locally, and must be sent to the server (either the cache is not active, or it is active but the data is not available). Once the read from the server is complete, netfs requires a call to netfs_subreq_terminated() which conveys either how many bytes were read successfully, or an error. Note that issue_read() is called with a structure, netfs_io_subrequest, which defines the IO requested, and contains a start and a length (both in bytes), and assumes the underlying netfs will return a either an error on the whole region, or the number of bytes successfully read. The NFS IO path is page based and the main APIs are the pgio APIs defined in pagelist.c. For the pgio APIs, there is no way for the caller to know how many RPCs will be sent and how the pages will be broken up into underlying RPCs, each of which will have their own completion and return code. In contrast, netfs is subrequest based, a single subrequest may contain multiple pages, and a single subrequest is initiated with issue_read() and terminated with netfs_subreq_terminated(). Thus, to utilze the netfs APIs, NFS needs some way to accommodate the netfs API requirement on the single response to the whole subrequest, while also minimizing disruptive changes to the NFS pgio layer. The approach taken with this patch is to allocate a small structure for each nfs_netfs_issue_read() call, store the final error and number of bytes successfully transferred in the structure, and update these values as each RPC completes. The refcount on the structure is used as a marker for the last RPC completion, is incremented in nfs_netfs_read_initiate(), and decremented inside nfs_netfs_read_completion(), when a nfs_pgio_header contains a valid pointer to the data. On the final put (which signals the final outstanding RPC is complete) in nfs_netfs_read_completion(), call netfs_subreq_terminated() with either the final error value (if one or more READs complete with an error) or the number of bytes successfully transferred (if all RPCs complete successfully). Note that when all RPCs complete successfully, the number of bytes transferred is capped to the length of the subrequest. Capping the transferred length to the subrequest length prevents "Subreq overread" warnings from netfs. This is due to the "aligned_len" in nfs_pageio_add_page(), and the corner case where NFS requests a full page at the end of the file, even when i_size reflects only a partial page (NFS overread). Signed-off-by: Dave Wysochanski <dwysocha@redhat.com> Tested-by: Daire Byrne <daire@dneg.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2023-02-20 13:43:06 +00:00
if (IS_ERR(new)) {
error = PTR_ERR(new);
if (nfs_netfs_folio_unlock(folio))
folio_unlock(folio);
NFS: Convert buffered read paths to use netfs when fscache is enabled Convert the NFS buffered read code paths to corresponding netfs APIs, but only when fscache is configured and enabled. The netfs API defines struct netfs_request_ops which must be filled in by the network filesystem. For NFS, we only need to define 5 of the functions, the main one being the issue_read() function. The issue_read() function is called by the netfs layer when a read cannot be fulfilled locally, and must be sent to the server (either the cache is not active, or it is active but the data is not available). Once the read from the server is complete, netfs requires a call to netfs_subreq_terminated() which conveys either how many bytes were read successfully, or an error. Note that issue_read() is called with a structure, netfs_io_subrequest, which defines the IO requested, and contains a start and a length (both in bytes), and assumes the underlying netfs will return a either an error on the whole region, or the number of bytes successfully read. The NFS IO path is page based and the main APIs are the pgio APIs defined in pagelist.c. For the pgio APIs, there is no way for the caller to know how many RPCs will be sent and how the pages will be broken up into underlying RPCs, each of which will have their own completion and return code. In contrast, netfs is subrequest based, a single subrequest may contain multiple pages, and a single subrequest is initiated with issue_read() and terminated with netfs_subreq_terminated(). Thus, to utilze the netfs APIs, NFS needs some way to accommodate the netfs API requirement on the single response to the whole subrequest, while also minimizing disruptive changes to the NFS pgio layer. The approach taken with this patch is to allocate a small structure for each nfs_netfs_issue_read() call, store the final error and number of bytes successfully transferred in the structure, and update these values as each RPC completes. The refcount on the structure is used as a marker for the last RPC completion, is incremented in nfs_netfs_read_initiate(), and decremented inside nfs_netfs_read_completion(), when a nfs_pgio_header contains a valid pointer to the data. On the final put (which signals the final outstanding RPC is complete) in nfs_netfs_read_completion(), call netfs_subreq_terminated() with either the final error value (if one or more READs complete with an error) or the number of bytes successfully transferred (if all RPCs complete successfully). Note that when all RPCs complete successfully, the number of bytes transferred is capped to the length of the subrequest. Capping the transferred length to the subrequest length prevents "Subreq overread" warnings from netfs. This is due to the "aligned_len" in nfs_pageio_add_page(), and the corner case where NFS requests a full page at the end of the file, even when i_size reflects only a partial page (NFS overread). Signed-off-by: Dave Wysochanski <dwysocha@redhat.com> Tested-by: Daire Byrne <daire@dneg.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2023-02-20 13:43:06 +00:00
goto out;
}
if (len < fsize)
folio_zero_segment(folio, len, fsize);
if (!nfs_pageio_add_request(pgio, new)) {
nfs_list_remove_request(new);
error = pgio->pg_error;
nfs_readpage_release(new, error);
goto out;
}
return 0;
out:
return error;
}
/*
* Actually read a folio over the wire.
*/
static int nfs_do_read_folio(struct file *file, struct folio *folio)
{
struct inode *inode = file_inode(file);
struct nfs_pageio_descriptor pgio;
struct nfs_open_context *ctx;
int ret;
ctx = get_nfs_open_context(nfs_file_open_context(file));
xchg(&ctx->error, 0);
nfs_pageio_init_read(&pgio, inode, false,
&nfs_async_read_completion_ops);
ret = nfs_read_add_folio(&pgio, ctx, folio);
if (ret)
goto out_put;
nfs_pageio_complete_read(&pgio);
nfs_update_delegated_atime(inode);
if (pgio.pg_error < 0) {
ret = pgio.pg_error;
goto out_put;
}
ret = folio_wait_locked_killable(folio);
if (!folio_test_uptodate(folio) && !ret)
ret = xchg(&ctx->error, 0);
out_put:
put_nfs_open_context(ctx);
return ret;
}
/*
* Synchronously read a folio.
*
* This is not heavily used as most users to try an asynchronous
* large read through ->readahead first.
*/
int nfs_read_folio(struct file *file, struct folio *folio)
{
struct inode *inode = file_inode(file);
loff_t pos = folio_pos(folio);
size_t len = folio_size(folio);
int ret;
trace_nfs_aop_readpage(inode, pos, len);
nfs_inc_stats(inode, NFSIOS_VFSREADPAGE);
task_io_account_read(len);
/*
* Try to flush any pending writes to the file..
*
* NOTE! Because we own the folio lock, there cannot
* be any new pending writes generated at this point
* for this folio (other folios can be written to).
*/
ret = nfs_wb_folio(inode, folio);
if (ret)
goto out_unlock;
if (folio_test_uptodate(folio))
goto out_unlock;
ret = -ESTALE;
if (NFS_STALE(inode))
goto out_unlock;
NFS: Convert buffered read paths to use netfs when fscache is enabled Convert the NFS buffered read code paths to corresponding netfs APIs, but only when fscache is configured and enabled. The netfs API defines struct netfs_request_ops which must be filled in by the network filesystem. For NFS, we only need to define 5 of the functions, the main one being the issue_read() function. The issue_read() function is called by the netfs layer when a read cannot be fulfilled locally, and must be sent to the server (either the cache is not active, or it is active but the data is not available). Once the read from the server is complete, netfs requires a call to netfs_subreq_terminated() which conveys either how many bytes were read successfully, or an error. Note that issue_read() is called with a structure, netfs_io_subrequest, which defines the IO requested, and contains a start and a length (both in bytes), and assumes the underlying netfs will return a either an error on the whole region, or the number of bytes successfully read. The NFS IO path is page based and the main APIs are the pgio APIs defined in pagelist.c. For the pgio APIs, there is no way for the caller to know how many RPCs will be sent and how the pages will be broken up into underlying RPCs, each of which will have their own completion and return code. In contrast, netfs is subrequest based, a single subrequest may contain multiple pages, and a single subrequest is initiated with issue_read() and terminated with netfs_subreq_terminated(). Thus, to utilze the netfs APIs, NFS needs some way to accommodate the netfs API requirement on the single response to the whole subrequest, while also minimizing disruptive changes to the NFS pgio layer. The approach taken with this patch is to allocate a small structure for each nfs_netfs_issue_read() call, store the final error and number of bytes successfully transferred in the structure, and update these values as each RPC completes. The refcount on the structure is used as a marker for the last RPC completion, is incremented in nfs_netfs_read_initiate(), and decremented inside nfs_netfs_read_completion(), when a nfs_pgio_header contains a valid pointer to the data. On the final put (which signals the final outstanding RPC is complete) in nfs_netfs_read_completion(), call netfs_subreq_terminated() with either the final error value (if one or more READs complete with an error) or the number of bytes successfully transferred (if all RPCs complete successfully). Note that when all RPCs complete successfully, the number of bytes transferred is capped to the length of the subrequest. Capping the transferred length to the subrequest length prevents "Subreq overread" warnings from netfs. This is due to the "aligned_len" in nfs_pageio_add_page(), and the corner case where NFS requests a full page at the end of the file, even when i_size reflects only a partial page (NFS overread). Signed-off-by: Dave Wysochanski <dwysocha@redhat.com> Tested-by: Daire Byrne <daire@dneg.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2023-02-20 13:43:06 +00:00
ret = nfs_netfs_read_folio(file, folio);
if (ret)
ret = nfs_do_read_folio(file, folio);
NFS: Convert buffered read paths to use netfs when fscache is enabled Convert the NFS buffered read code paths to corresponding netfs APIs, but only when fscache is configured and enabled. The netfs API defines struct netfs_request_ops which must be filled in by the network filesystem. For NFS, we only need to define 5 of the functions, the main one being the issue_read() function. The issue_read() function is called by the netfs layer when a read cannot be fulfilled locally, and must be sent to the server (either the cache is not active, or it is active but the data is not available). Once the read from the server is complete, netfs requires a call to netfs_subreq_terminated() which conveys either how many bytes were read successfully, or an error. Note that issue_read() is called with a structure, netfs_io_subrequest, which defines the IO requested, and contains a start and a length (both in bytes), and assumes the underlying netfs will return a either an error on the whole region, or the number of bytes successfully read. The NFS IO path is page based and the main APIs are the pgio APIs defined in pagelist.c. For the pgio APIs, there is no way for the caller to know how many RPCs will be sent and how the pages will be broken up into underlying RPCs, each of which will have their own completion and return code. In contrast, netfs is subrequest based, a single subrequest may contain multiple pages, and a single subrequest is initiated with issue_read() and terminated with netfs_subreq_terminated(). Thus, to utilze the netfs APIs, NFS needs some way to accommodate the netfs API requirement on the single response to the whole subrequest, while also minimizing disruptive changes to the NFS pgio layer. The approach taken with this patch is to allocate a small structure for each nfs_netfs_issue_read() call, store the final error and number of bytes successfully transferred in the structure, and update these values as each RPC completes. The refcount on the structure is used as a marker for the last RPC completion, is incremented in nfs_netfs_read_initiate(), and decremented inside nfs_netfs_read_completion(), when a nfs_pgio_header contains a valid pointer to the data. On the final put (which signals the final outstanding RPC is complete) in nfs_netfs_read_completion(), call netfs_subreq_terminated() with either the final error value (if one or more READs complete with an error) or the number of bytes successfully transferred (if all RPCs complete successfully). Note that when all RPCs complete successfully, the number of bytes transferred is capped to the length of the subrequest. Capping the transferred length to the subrequest length prevents "Subreq overread" warnings from netfs. This is due to the "aligned_len" in nfs_pageio_add_page(), and the corner case where NFS requests a full page at the end of the file, even when i_size reflects only a partial page (NFS overread). Signed-off-by: Dave Wysochanski <dwysocha@redhat.com> Tested-by: Daire Byrne <daire@dneg.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2023-02-20 13:43:06 +00:00
out:
trace_nfs_aop_readpage_done(inode, pos, len, ret);
return ret;
out_unlock:
folio_unlock(folio);
NFS: Convert buffered read paths to use netfs when fscache is enabled Convert the NFS buffered read code paths to corresponding netfs APIs, but only when fscache is configured and enabled. The netfs API defines struct netfs_request_ops which must be filled in by the network filesystem. For NFS, we only need to define 5 of the functions, the main one being the issue_read() function. The issue_read() function is called by the netfs layer when a read cannot be fulfilled locally, and must be sent to the server (either the cache is not active, or it is active but the data is not available). Once the read from the server is complete, netfs requires a call to netfs_subreq_terminated() which conveys either how many bytes were read successfully, or an error. Note that issue_read() is called with a structure, netfs_io_subrequest, which defines the IO requested, and contains a start and a length (both in bytes), and assumes the underlying netfs will return a either an error on the whole region, or the number of bytes successfully read. The NFS IO path is page based and the main APIs are the pgio APIs defined in pagelist.c. For the pgio APIs, there is no way for the caller to know how many RPCs will be sent and how the pages will be broken up into underlying RPCs, each of which will have their own completion and return code. In contrast, netfs is subrequest based, a single subrequest may contain multiple pages, and a single subrequest is initiated with issue_read() and terminated with netfs_subreq_terminated(). Thus, to utilze the netfs APIs, NFS needs some way to accommodate the netfs API requirement on the single response to the whole subrequest, while also minimizing disruptive changes to the NFS pgio layer. The approach taken with this patch is to allocate a small structure for each nfs_netfs_issue_read() call, store the final error and number of bytes successfully transferred in the structure, and update these values as each RPC completes. The refcount on the structure is used as a marker for the last RPC completion, is incremented in nfs_netfs_read_initiate(), and decremented inside nfs_netfs_read_completion(), when a nfs_pgio_header contains a valid pointer to the data. On the final put (which signals the final outstanding RPC is complete) in nfs_netfs_read_completion(), call netfs_subreq_terminated() with either the final error value (if one or more READs complete with an error) or the number of bytes successfully transferred (if all RPCs complete successfully). Note that when all RPCs complete successfully, the number of bytes transferred is capped to the length of the subrequest. Capping the transferred length to the subrequest length prevents "Subreq overread" warnings from netfs. This is due to the "aligned_len" in nfs_pageio_add_page(), and the corner case where NFS requests a full page at the end of the file, even when i_size reflects only a partial page (NFS overread). Signed-off-by: Dave Wysochanski <dwysocha@redhat.com> Tested-by: Daire Byrne <daire@dneg.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2023-02-20 13:43:06 +00:00
goto out;
}
void nfs_readahead(struct readahead_control *ractl)
{
struct nfs_pageio_descriptor pgio;
struct nfs_open_context *ctx;
unsigned int nr_pages = readahead_count(ractl);
struct file *file = ractl->file;
struct inode *inode = ractl->mapping->host;
struct folio *folio;
int ret;
trace_nfs_aop_readahead(inode, readahead_pos(ractl), nr_pages);
nfs_inc_stats(inode, NFSIOS_VFSREADPAGES);
task_io_account_read(readahead_length(ractl));
ret = -ESTALE;
if (NFS_STALE(inode))
goto out;
NFS: Convert buffered read paths to use netfs when fscache is enabled Convert the NFS buffered read code paths to corresponding netfs APIs, but only when fscache is configured and enabled. The netfs API defines struct netfs_request_ops which must be filled in by the network filesystem. For NFS, we only need to define 5 of the functions, the main one being the issue_read() function. The issue_read() function is called by the netfs layer when a read cannot be fulfilled locally, and must be sent to the server (either the cache is not active, or it is active but the data is not available). Once the read from the server is complete, netfs requires a call to netfs_subreq_terminated() which conveys either how many bytes were read successfully, or an error. Note that issue_read() is called with a structure, netfs_io_subrequest, which defines the IO requested, and contains a start and a length (both in bytes), and assumes the underlying netfs will return a either an error on the whole region, or the number of bytes successfully read. The NFS IO path is page based and the main APIs are the pgio APIs defined in pagelist.c. For the pgio APIs, there is no way for the caller to know how many RPCs will be sent and how the pages will be broken up into underlying RPCs, each of which will have their own completion and return code. In contrast, netfs is subrequest based, a single subrequest may contain multiple pages, and a single subrequest is initiated with issue_read() and terminated with netfs_subreq_terminated(). Thus, to utilze the netfs APIs, NFS needs some way to accommodate the netfs API requirement on the single response to the whole subrequest, while also minimizing disruptive changes to the NFS pgio layer. The approach taken with this patch is to allocate a small structure for each nfs_netfs_issue_read() call, store the final error and number of bytes successfully transferred in the structure, and update these values as each RPC completes. The refcount on the structure is used as a marker for the last RPC completion, is incremented in nfs_netfs_read_initiate(), and decremented inside nfs_netfs_read_completion(), when a nfs_pgio_header contains a valid pointer to the data. On the final put (which signals the final outstanding RPC is complete) in nfs_netfs_read_completion(), call netfs_subreq_terminated() with either the final error value (if one or more READs complete with an error) or the number of bytes successfully transferred (if all RPCs complete successfully). Note that when all RPCs complete successfully, the number of bytes transferred is capped to the length of the subrequest. Capping the transferred length to the subrequest length prevents "Subreq overread" warnings from netfs. This is due to the "aligned_len" in nfs_pageio_add_page(), and the corner case where NFS requests a full page at the end of the file, even when i_size reflects only a partial page (NFS overread). Signed-off-by: Dave Wysochanski <dwysocha@redhat.com> Tested-by: Daire Byrne <daire@dneg.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2023-02-20 13:43:06 +00:00
ret = nfs_netfs_readahead(ractl);
if (!ret)
goto out;
if (file == NULL) {
ret = -EBADF;
ctx = nfs_find_open_context(inode, NULL, FMODE_READ);
if (ctx == NULL)
goto out;
} else
ctx = get_nfs_open_context(nfs_file_open_context(file));
nfs_pageio_init_read(&pgio, inode, false,
&nfs_async_read_completion_ops);
while ((folio = readahead_folio(ractl)) != NULL) {
ret = nfs_read_add_folio(&pgio, ctx, folio);
if (ret)
break;
}
nfs_pageio_complete_read(&pgio);
nfs_update_delegated_atime(inode);
put_nfs_open_context(ctx);
out:
trace_nfs_aop_readahead_done(inode, nr_pages, ret);
}
int __init nfs_init_readpagecache(void)
{
nfs_rdata_cachep = kmem_cache_create("nfs_read_data",
sizeof(struct nfs_pgio_header),
0, SLAB_HWCACHE_ALIGN,
NULL);
if (nfs_rdata_cachep == NULL)
return -ENOMEM;
return 0;
}
void nfs_destroy_readpagecache(void)
{
kmem_cache_destroy(nfs_rdata_cachep);
}
static const struct nfs_rw_ops nfs_rw_read_ops = {
.rw_alloc_header = nfs_readhdr_alloc,
.rw_free_header = nfs_readhdr_free,
.rw_done = nfs_readpage_done,
.rw_result = nfs_readpage_result,
.rw_initiate = nfs_initiate_read,
};