linux/drivers/infiniband/hw/hfi1/hfi.h

2523 lines
74 KiB
C
Raw Normal View History

#ifndef _HFI1_KERNEL_H
#define _HFI1_KERNEL_H
/*
IB/hfi1: Rework fault injection machinery The packet fault injection code present in the HFI1 driver had some issues which not only fragment the code but also created user confusion. Furthermore, it suffered from the following issues: 1. The fault_packet method only worked for received packets. This meant that the only fault injection mode available for sent packets is fault_opcode, which did not allow for random packet drops on all egressing packets. 2. The mask available for the fault_opcode mode did not really work due to the fact that the opcode values are not bits in a bitmask but rather sequential integer values. Creating a opcode/mask pair that would successfully capture a set of packets was nearly impossible. 3. The code was fragmented and used too many debugfs entries to operate and control. This was confusing to users. 4. It did not allow filtering fault injection on a per direction basis - egress vs. ingress. In order to improve or fix the above issues, the following changes have been made: 1. The fault injection methods have been combined into a single fault injection facility. As such, the fault injection has been plugged into both the send and receive code paths. Regardless of method used the fault injection will operate on both egress and ingress packets. 2. The type of fault injection - by packet or by opcode - is now controlled by changing the boolean value of the file "opcode_mode". When the value is set to True, fault injection is done by opcode. Otherwise, by packet. 2. The masking ability has been removed in favor of a bitmap that holds opcodes of interest (one bit per opcode, a total of 256 bits). This works in tandem with the "opcode_mode" value. When the value of "opcode_mode" is False, this bitmap is ignored. When the value is True, the bitmap lists all opcodes to be considered for fault injection. By default, the bitmap is empty. When the user wants to filter by opcode, the user sets the corresponding bit in the bitmap by echo'ing the bit position into the 'opcodes' file. This gets around the issue that the set of opcodes does not lend itself to effective masks and allow for extremely fine-grained filtering by opcode. 4. fault_packet and fault_opcode methods have been combined. Hence, there is only one debugfs directory controlling the entire operation of the fault injection machinery. This reduces the number of debugfs entries and provides a more unified user experience. 5. A new control files - "direction" - is provided to allow the user to control the direction of packets, which are subject to fault injection. 6. A new control file - "skip_usec" - is added that would allow the user to specify a "timeout" during which no fault injection will occur. In addition, the following bug fixes have been applied: 1. The fault injection code has been split into its own header and source files. This was done to better organize the code and support conditional compilation without littering the code with #ifdef's. 2. The method by which the TX PIO packets were being marked for drop conflicted with the way send contexts were being setup. As a result, the send context was repeatedly being reset. 3. The fault injection only makes sense when the user can control it through the debugfs entries. However, a kernel configuration can enable fault injection but keep fault injection debugfs entries disabled. Therefore, it makes sense that the HFI fault injection code depends on both. 4. Error suppression did not take into account the method by which PIO packets were being dropped. Therefore, even with error suppression turned on, errors would still be displayed to the screen. A larger enough packet drop percentage would case the kernel to crash because the driver would be stuck printing errors. Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Reviewed-by: Don Hiatt <don.hiatt@intel.com> Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Mitko Haralanov <mitko.haralanov@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-05-02 13:43:24 +00:00
* Copyright(c) 2015-2018 Intel Corporation.
*
* This file is provided under a dual BSD/GPLv2 license. When using or
* redistributing this file, you may do so under either license.
*
* GPL LICENSE SUMMARY
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of version 2 of the GNU General Public License as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* BSD LICENSE
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* - Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* - Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* - Neither the name of Intel Corporation nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
*/
#include <linux/interrupt.h>
#include <linux/pci.h>
#include <linux/dma-mapping.h>
#include <linux/mutex.h>
#include <linux/list.h>
#include <linux/scatterlist.h>
#include <linux/slab.h>
#include <linux/io.h>
#include <linux/fs.h>
#include <linux/completion.h>
#include <linux/kref.h>
#include <linux/sched.h>
#include <linux/cdev.h>
#include <linux/delay.h>
#include <linux/kthread.h>
#include <linux/i2c.h>
#include <linux/i2c-algo-bit.h>
#include <linux/xarray.h>
#include <rdma/ib_hdrs.h>
#include <rdma/opa_addr.h>
#include <linux/rhashtable.h>
#include <linux/netdevice.h>
#include <rdma/rdma_vt.h>
#include "chip_registers.h"
#include "common.h"
#include "opfn.h"
#include "verbs.h"
#include "pio.h"
#include "chip.h"
#include "mad.h"
#include "qsfp.h"
#include "platform.h"
#include "affinity.h"
#include "msix.h"
/* bumped 1 from s/w major version of TrueScale */
#define HFI1_CHIP_VERS_MAJ 3U
/* don't care about this except printing */
#define HFI1_CHIP_VERS_MIN 0U
/* The Organization Unique Identifier (Mfg code), and its position in GUID */
#define HFI1_OUI 0x001175
#define HFI1_OUI_LSB 40
#define DROP_PACKET_OFF 0
#define DROP_PACKET_ON 1
#define NEIGHBOR_TYPE_HFI 0
#define NEIGHBOR_TYPE_SWITCH 1
#define HFI1_MAX_ACTIVE_WORKQUEUE_ENTRIES 5
extern unsigned long hfi1_cap_mask;
#define HFI1_CAP_KGET_MASK(mask, cap) ((mask) & HFI1_CAP_##cap)
#define HFI1_CAP_UGET_MASK(mask, cap) \
(((mask) >> HFI1_CAP_USER_SHIFT) & HFI1_CAP_##cap)
#define HFI1_CAP_KGET(cap) (HFI1_CAP_KGET_MASK(hfi1_cap_mask, cap))
#define HFI1_CAP_UGET(cap) (HFI1_CAP_UGET_MASK(hfi1_cap_mask, cap))
#define HFI1_CAP_IS_KSET(cap) (!!HFI1_CAP_KGET(cap))
#define HFI1_CAP_IS_USET(cap) (!!HFI1_CAP_UGET(cap))
#define HFI1_MISC_GET() ((hfi1_cap_mask >> HFI1_CAP_MISC_SHIFT) & \
HFI1_CAP_MISC_MASK)
/* Offline Disabled Reason is 4-bits */
#define HFI1_ODR_MASK(rsn) ((rsn) & OPA_PI_MASK_OFFLINE_REASON)
/*
* Control context is always 0 and handles the error packets.
* It also handles the VL15 and multicast packets.
*/
#define HFI1_CTRL_CTXT 0
/*
* Driver context will store software counters for each of the events
* associated with these status registers
*/
#define NUM_CCE_ERR_STATUS_COUNTERS 41
#define NUM_RCV_ERR_STATUS_COUNTERS 64
#define NUM_MISC_ERR_STATUS_COUNTERS 13
#define NUM_SEND_PIO_ERR_STATUS_COUNTERS 36
#define NUM_SEND_DMA_ERR_STATUS_COUNTERS 4
#define NUM_SEND_EGRESS_ERR_STATUS_COUNTERS 64
#define NUM_SEND_ERR_STATUS_COUNTERS 3
#define NUM_SEND_CTXT_ERR_STATUS_COUNTERS 5
#define NUM_SEND_DMA_ENG_ERR_STATUS_COUNTERS 24
/*
* per driver stats, either not device nor port-specific, or
* summed over all of the devices and ports.
* They are described by name via ipathfs filesystem, so layout
* and number of elements can change without breaking compatibility.
* If members are added or deleted hfi1_statnames[] in debugfs.c must
* change to match.
*/
struct hfi1_ib_stats {
__u64 sps_ints; /* number of interrupts handled */
__u64 sps_errints; /* number of error interrupts */
__u64 sps_txerrs; /* tx-related packet errors */
__u64 sps_rcverrs; /* non-crc rcv packet errors */
__u64 sps_hwerrs; /* hardware errors reported (parity, etc.) */
__u64 sps_nopiobufs; /* no pio bufs avail from kernel */
__u64 sps_ctxts; /* number of contexts currently open */
__u64 sps_lenerrs; /* number of kernel packets where RHF != LRH len */
__u64 sps_buffull;
__u64 sps_hdrfull;
};
extern struct hfi1_ib_stats hfi1_stats;
extern const struct pci_error_handlers hfi1_pci_err_handler;
IB/hfi1: Fix an out-of-bounds access in get_hw_stats When running with KASAN, the following trace is produced: [ 62.535888] ================================================================== [ 62.544930] BUG: KASAN: slab-out-of-bounds in gut_hw_stats+0x122/0x230 [hfi1] [ 62.553856] Write of size 8 at addr ffff88080e8d6330 by task kworker/0:1/14 [ 62.565333] CPU: 0 PID: 14 Comm: kworker/0:1 Not tainted 4.19.0-test-build-kasan+ #8 [ 62.575087] Hardware name: Intel Corporation S2600KPR/S2600KPR, BIOS SE5C610.86B.01.01.0019.101220160604 10/12/2016 [ 62.587951] Workqueue: events work_for_cpu_fn [ 62.594050] Call Trace: [ 62.598023] dump_stack+0xc6/0x14c [ 62.603089] ? dump_stack_print_info.cold.1+0x2f/0x2f [ 62.610041] ? kmsg_dump_rewind_nolock+0x59/0x59 [ 62.616615] ? get_hw_stats+0x122/0x230 [hfi1] [ 62.622985] print_address_description+0x6c/0x23c [ 62.629744] ? get_hw_stats+0x122/0x230 [hfi1] [ 62.636108] kasan_report.cold.6+0x241/0x308 [ 62.642365] get_hw_stats+0x122/0x230 [hfi1] [ 62.648703] ? hfi1_alloc_rn+0x40/0x40 [hfi1] [ 62.655088] ? __kmalloc+0x110/0x240 [ 62.660695] ? hfi1_alloc_rn+0x40/0x40 [hfi1] [ 62.667142] setup_hw_stats+0xd8/0x430 [ib_core] [ 62.673972] ? show_hfi+0x50/0x50 [hfi1] [ 62.680026] ib_device_register_sysfs+0x165/0x180 [ib_core] [ 62.687995] ib_register_device+0x5a2/0xa10 [ib_core] [ 62.695340] ? show_hfi+0x50/0x50 [hfi1] [ 62.701421] ? ib_unregister_device+0x2e0/0x2e0 [ib_core] [ 62.709222] ? __vmalloc_node_range+0x2d0/0x380 [ 62.716131] ? rvt_driver_mr_init+0x11f/0x2d0 [rdmavt] [ 62.723735] ? vmalloc_node+0x5c/0x70 [ 62.729697] ? rvt_driver_mr_init+0x11f/0x2d0 [rdmavt] [ 62.737347] ? rvt_driver_mr_init+0x1f5/0x2d0 [rdmavt] [ 62.744998] ? __rvt_alloc_mr+0x110/0x110 [rdmavt] [ 62.752315] ? rvt_rc_error+0x140/0x140 [rdmavt] [ 62.759434] ? rvt_vma_open+0x30/0x30 [rdmavt] [ 62.766364] ? mutex_unlock+0x1d/0x40 [ 62.772445] ? kmem_cache_create_usercopy+0x15d/0x230 [ 62.780115] rvt_register_device+0x1f6/0x360 [rdmavt] [ 62.787823] ? rvt_get_port_immutable+0x180/0x180 [rdmavt] [ 62.796058] ? __get_txreq+0x400/0x400 [hfi1] [ 62.802969] ? memcpy+0x34/0x50 [ 62.808611] hfi1_register_ib_device+0xde6/0xeb0 [hfi1] [ 62.816601] ? hfi1_get_npkeys+0x10/0x10 [hfi1] [ 62.823760] ? hfi1_init+0x89f/0x9a0 [hfi1] [ 62.830469] ? hfi1_setup_eagerbufs+0xad0/0xad0 [hfi1] [ 62.838204] ? pcie_capability_clear_and_set_word+0xcd/0xe0 [ 62.846429] ? pcie_capability_read_word+0xd0/0xd0 [ 62.853791] ? hfi1_pcie_init+0x187/0x4b0 [hfi1] [ 62.860958] init_one+0x67f/0xae0 [hfi1] [ 62.867301] ? hfi1_init+0x9a0/0x9a0 [hfi1] [ 62.873876] ? wait_woken+0x130/0x130 [ 62.879860] ? read_word_at_a_time+0xe/0x20 [ 62.886329] ? strscpy+0x14b/0x280 [ 62.891998] ? hfi1_init+0x9a0/0x9a0 [hfi1] [ 62.898405] local_pci_probe+0x70/0xd0 [ 62.904295] ? pci_device_shutdown+0x90/0x90 [ 62.910833] work_for_cpu_fn+0x29/0x40 [ 62.916750] process_one_work+0x584/0x960 [ 62.922974] ? rcu_work_rcufn+0x40/0x40 [ 62.928991] ? __schedule+0x396/0xdc0 [ 62.934806] ? __sched_text_start+0x8/0x8 [ 62.941020] ? pick_next_task_fair+0x68b/0xc60 [ 62.947674] ? run_rebalance_domains+0x260/0x260 [ 62.954471] ? __list_add_valid+0x29/0xa0 [ 62.960607] ? move_linked_works+0x1c7/0x230 [ 62.967077] ? trace_event_raw_event_workqueue_execute_start+0x140/0x140 [ 62.976248] ? mutex_lock+0xa6/0x100 [ 62.982029] ? __mutex_lock_slowpath+0x10/0x10 [ 62.988795] ? __switch_to+0x37a/0x710 [ 62.994731] worker_thread+0x62e/0x9d0 [ 63.000602] ? max_active_store+0xf0/0xf0 [ 63.006828] ? __switch_to_asm+0x40/0x70 [ 63.012932] ? __switch_to_asm+0x34/0x70 [ 63.019013] ? __switch_to_asm+0x40/0x70 [ 63.025042] ? __switch_to_asm+0x34/0x70 [ 63.031030] ? __switch_to_asm+0x40/0x70 [ 63.037006] ? __schedule+0x396/0xdc0 [ 63.042660] ? kmem_cache_alloc_trace+0xf3/0x1f0 [ 63.049323] ? kthread+0x59/0x1d0 [ 63.054594] ? ret_from_fork+0x35/0x40 [ 63.060257] ? __sched_text_start+0x8/0x8 [ 63.066212] ? schedule+0xcf/0x250 [ 63.071529] ? __wake_up_common+0x110/0x350 [ 63.077794] ? __schedule+0xdc0/0xdc0 [ 63.083348] ? wait_woken+0x130/0x130 [ 63.088963] ? finish_task_switch+0x1f1/0x520 [ 63.095258] ? kasan_unpoison_shadow+0x30/0x40 [ 63.101792] ? __init_waitqueue_head+0xa0/0xd0 [ 63.108183] ? replenish_dl_entity.cold.60+0x18/0x18 [ 63.115151] ? _raw_spin_lock_irqsave+0x25/0x50 [ 63.121754] ? max_active_store+0xf0/0xf0 [ 63.127753] kthread+0x1ae/0x1d0 [ 63.132894] ? kthread_bind+0x30/0x30 [ 63.138422] ret_from_fork+0x35/0x40 [ 63.146973] Allocated by task 14: [ 63.152077] kasan_kmalloc+0xbf/0xe0 [ 63.157471] __kmalloc+0x110/0x240 [ 63.162804] init_cntrs+0x34d/0xdf0 [hfi1] [ 63.168883] hfi1_init_dd+0x29a3/0x2f90 [hfi1] [ 63.175244] init_one+0x551/0xae0 [hfi1] [ 63.181065] local_pci_probe+0x70/0xd0 [ 63.186759] work_for_cpu_fn+0x29/0x40 [ 63.192310] process_one_work+0x584/0x960 [ 63.198163] worker_thread+0x62e/0x9d0 [ 63.203843] kthread+0x1ae/0x1d0 [ 63.208874] ret_from_fork+0x35/0x40 [ 63.217203] Freed by task 1: [ 63.221844] __kasan_slab_free+0x12e/0x180 [ 63.227844] kfree+0x92/0x1a0 [ 63.232570] single_release+0x3a/0x60 [ 63.238024] __fput+0x1d9/0x480 [ 63.242911] task_work_run+0x139/0x190 [ 63.248440] exit_to_usermode_loop+0x191/0x1a0 [ 63.254814] do_syscall_64+0x301/0x330 [ 63.260283] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 63.270199] The buggy address belongs to the object at ffff88080e8d5500 which belongs to the cache kmalloc-4096 of size 4096 [ 63.287247] The buggy address is located 3632 bytes inside of 4096-byte region [ffff88080e8d5500, ffff88080e8d6500) [ 63.303564] The buggy address belongs to the page: [ 63.310447] page:ffffea00203a3400 count:1 mapcount:0 mapping:ffff88081380e840 index:0x0 compound_mapcount: 0 [ 63.323102] flags: 0x2fffff80008100(slab|head) [ 63.329775] raw: 002fffff80008100 0000000000000000 0000000100000001 ffff88081380e840 [ 63.340175] raw: 0000000000000000 0000000000070007 00000001ffffffff 0000000000000000 [ 63.350564] page dumped because: kasan: bad access detected [ 63.361974] Memory state around the buggy address: [ 63.369137] ffff88080e8d6200: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 63.379082] ffff88080e8d6280: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 63.389032] >ffff88080e8d6300: 00 00 00 00 00 00 fc fc fc fc fc fc fc fc fc fc [ 63.398944] ^ [ 63.406141] ffff88080e8d6380: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 63.416109] ffff88080e8d6400: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 63.426099] ================================================================== The trace happens because get_hw_stats() assumes there is room in the memory allocated in init_cntrs() to accommodate the driver counters. Unfortunately, that routine only allocated space for the device counters. Fix by insuring the allocation has room for the additional driver counters. Cc: <Stable@vger.kernel.org> # v4.14+ Fixes: b7481944b06e9 ("IB/hfi1: Show statistics counters under IB stats interface") Reviewed-by: Mike Marciniczyn <mike.marciniszyn@intel.com> Reviewed-by: Mike Ruhl <michael.j.ruhl@intel.com> Signed-off-by: Piotr Stankiewicz <piotr.stankiewicz@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-11-28 14:44:46 +00:00
extern int num_driver_cntrs;
/*
* First-cut criterion for "device is active" is
* two thousand dwords combined Tx, Rx traffic per
* 5-second interval. SMA packets are 64 dwords,
* and occur "a few per second", presumably each way.
*/
#define HFI1_TRAFFIC_ACTIVE_THRESHOLD (2000)
/*
* Below contains all data related to a single context (formerly called port).
*/
struct hfi1_opcode_stats_perctx;
struct ctxt_eager_bufs {
struct eager_buffer {
void *addr;
dma_addr_t dma;
ssize_t len;
} *buffers;
struct {
void *addr;
dma_addr_t dma;
} *rcvtids;
u32 size; /* total size of eager buffers */
u32 rcvtid_size; /* size of each eager rcv tid */
u16 count; /* size of buffers array */
u16 numbufs; /* number of buffers allocated */
u16 alloced; /* number of rcvarray entries used */
u16 threshold; /* head update threshold */
};
struct exp_tid_set {
struct list_head list;
u32 count;
};
typedef int (*rhf_rcv_function_ptr)(struct hfi1_packet *packet);
struct tid_queue {
struct list_head queue_head;
/* queue head for QP TID resource waiters */
u32 enqueue; /* count of tid enqueues */
u32 dequeue; /* count of tid dequeues */
};
struct hfi1_ctxtdata {
/* rcvhdrq base, needs mmap before useful */
void *rcvhdrq;
/* kernel virtual address where hdrqtail is updated */
volatile __le64 *rcvhdrtail_kvaddr;
/* so functions that need physical port can get it easily */
struct hfi1_pportdata *ppd;
/* so file ops can get at unit */
struct hfi1_devdata *dd;
/* this receive context's assigned PIO ACK send context */
struct send_context *sc;
/* per context recv functions */
const rhf_rcv_function_ptr *rhf_rcv_function_map;
/*
* The interrupt handler for a particular receive context can vary
* throughout it's lifetime. This is not a lock protected data member so
* it must be updated atomically and the prev and new value must always
* be valid. Worst case is we process an extra interrupt and up to 64
* packets with the wrong interrupt handler.
*/
int (*do_interrupt)(struct hfi1_ctxtdata *rcd, int threaded);
/* verbs rx_stats per rcd */
struct hfi1_opcode_stats_perctx *opstats;
/* clear interrupt mask */
u64 imask;
/* ctxt rcvhdrq head offset */
u32 head;
/* number of rcvhdrq entries */
u16 rcvhdrq_cnt;
u8 ireg; /* clear interrupt register */
/* receive packet sequence counter */
u8 seq_cnt;
/* size of each of the rcvhdrq entries */
u8 rcvhdrqentsize;
/* offset of RHF within receive header entry */
u8 rhf_offset;
/* dynamic receive available interrupt timeout */
u8 rcvavail_timeout;
/* Indicates that this is vnic context */
bool is_vnic;
/* vnic queue index this context is mapped to */
u8 vnic_q_idx;
/* Is ASPM interrupt supported for this context */
bool aspm_intr_supported;
/* ASPM state (enabled/disabled) for this context */
bool aspm_enabled;
/* Is ASPM processing enabled for this context (in intr context) */
bool aspm_intr_enable;
struct ctxt_eager_bufs egrbufs;
/* QPs waiting for context processing */
struct list_head qp_wait_list;
/* tid allocation lists */
struct exp_tid_set tid_group_list;
struct exp_tid_set tid_used_list;
struct exp_tid_set tid_full_list;
/* Timer for re-enabling ASPM if interrupt activity quiets down */
struct timer_list aspm_timer;
/* per-context configuration flags */
unsigned long flags;
/* array of tid_groups */
struct tid_group *groups;
/* mmap of hdrq, must fit in 44 bits */
dma_addr_t rcvhdrq_dma;
dma_addr_t rcvhdrqtailaddr_dma;
/* Last interrupt timestamp */
ktime_t aspm_ts_last_intr;
/* Last timestamp at which we scheduled a timer for this context */
ktime_t aspm_ts_timer_sched;
/* Lock to serialize between intr, timer intr and user threads */
spinlock_t aspm_lock;
IB/hfi1: Resolve kernel panics by reference counting receive contexts Base receive contexts can be used by sub contexts. Because of this, resources for the context cannot be completely freed until all sub contexts are done using the base context. Introduce a reference count so that the base receive context can be freed only when all sub contexts are done with it. Use the provided function call for setting default send context integrity rather than the manual method. The cleanup path does not set all variables back to NULL after freeing resources. Since the clean up code can get called more than once, (e.g. during context close and on the error path), it is necessary to make sure that all the variables are NULLed. Possible crash are: BUG: unable to handle kernel paging request at 0000000001908900 IP: read_csr+0x24/0x30 [hfi1] RIP: 0010:read_csr+0x24/0x30 [hfi1] Call Trace: sc_disable+0x40/0x110 [hfi1] hfi1_file_close+0x16f/0x360 [hfi1] __fput+0xe7/0x210 ____fput+0xe/0x10 or kernel BUG at mm/slub.c:3877! RIP: 0010:kfree+0x14f/0x170 Call Trace: hfi1_free_ctxtdata+0x19a/0x2b0 [hfi1] ? hfi1_user_exp_rcv_grp_free+0x73/0x80 [hfi1] hfi1_file_close+0x20f/0x360 [hfi1] __fput+0xe7/0x210 ____fput+0xe/0x10 Fixes: Commit 62239fc6e554 ("IB/hfi1: Clean up on context initialization failure") Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Reviewed-by: Sebastian Sanchez <sebastian.sanchez@intel.com> Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-06-09 23:00:19 +00:00
/* Reference count the base context usage */
struct kref kref;
/* numa node of this context */
int numa_id;
/* associated msix interrupt. */
s16 msix_intr;
/* job key */
u16 jkey;
/* number of RcvArray groups for this context. */
u16 rcv_array_groups;
/* index of first eager TID entry. */
u16 eager_base;
/* number of expected TID entries */
u16 expected_count;
/* index of first expected TID entry. */
u16 expected_base;
/* Device context index */
u8 ctxt;
/* PSM Specific fields */
/* lock protecting all Expected TID data */
struct mutex exp_mutex;
/* lock protecting all Expected TID data of kernel contexts */
spinlock_t exp_lock;
/* Queue for QP's waiting for HW TID flows */
struct tid_queue flow_queue;
/* Queue for QP's waiting for HW receive array entries */
struct tid_queue rarr_queue;
/* when waiting for rcv or pioavail */
wait_queue_head_t wait;
/* uuid from PSM */
u8 uuid[16];
/* same size as task_struct .comm[], command that opened context */
char comm[TASK_COMM_LEN];
/* Bitmask of in use context(s) */
DECLARE_BITMAP(in_use_ctxts, HFI1_MAX_SHARED_CTXTS);
/* per-context event flags for fileops/intr communication */
unsigned long event_flags;
/* A page of memory for rcvhdrhead, rcvegrhead, rcvegrtail * N */
void *subctxt_uregbase;
/* An array of pages for the eager receive buffers * N */
void *subctxt_rcvegrbuf;
/* An array of pages for the eager header queue entries * N */
void *subctxt_rcvhdr_base;
/* total number of polled urgent packets */
u32 urgent;
/* saved total number of polled urgent packets for poll edge trigger */
u32 urgent_poll;
/* Type of packets or conditions we want to poll for */
u16 poll_type;
/* non-zero if ctxt is being shared. */
u16 subctxt_id;
/* The version of the library which opened this ctxt */
u32 userversion;
/*
* non-zero if ctxt can be shared, and defines the maximum number of
* sub-contexts for this device context.
*/
u8 subctxt_cnt;
/* Bit mask to track free TID RDMA HW flows */
unsigned long flow_mask;
struct tid_flow_state flows[RXE_NUM_TID_FLOWS];
};
/**
* rcvhdrq_size - return total size in bytes for header queue
* @rcd: the receive context
*
* rcvhdrqentsize is in DWs, so we have to convert to bytes
*
*/
static inline u32 rcvhdrq_size(struct hfi1_ctxtdata *rcd)
{
return PAGE_ALIGN(rcd->rcvhdrq_cnt *
rcd->rcvhdrqentsize * sizeof(u32));
}
/*
* Represents a single packet at a high level. Put commonly computed things in
* here so we do not have to keep doing them over and over. The rule of thumb is
* if something is used one time to derive some value, store that something in
* here. If it is used multiple times, then store the result of that derivation
* in here.
*/
struct hfi1_packet {
void *ebuf;
void *hdr;
void *payload;
struct hfi1_ctxtdata *rcd;
__le32 *rhf_addr;
struct rvt_qp *qp;
struct ib_other_headers *ohdr;
struct ib_grh *grh;
struct opa_16b_mgmt *mgmt;
u64 rhf;
u32 maxcnt;
u32 rhqoff;
u32 dlid;
u32 slid;
u16 tlen;
s16 etail;
u16 pkey;
u8 hlen;
u8 numpkt;
u8 rsize;
u8 updegr;
u8 etype;
u8 extra_byte;
u8 pad;
u8 sc;
u8 sl;
u8 opcode;
bool migrated;
};
/* Packet types */
#define HFI1_PKT_TYPE_9B 0
#define HFI1_PKT_TYPE_16B 1
/*
* OPA 16B Header
*/
#define OPA_16B_L4_MASK 0xFFull
#define OPA_16B_SC_MASK 0x1F00000ull
#define OPA_16B_SC_SHIFT 20
#define OPA_16B_LID_MASK 0xFFFFFull
#define OPA_16B_DLID_MASK 0xF000ull
#define OPA_16B_DLID_SHIFT 20
#define OPA_16B_DLID_HIGH_SHIFT 12
#define OPA_16B_SLID_MASK 0xF00ull
#define OPA_16B_SLID_SHIFT 20
#define OPA_16B_SLID_HIGH_SHIFT 8
#define OPA_16B_BECN_MASK 0x80000000ull
#define OPA_16B_BECN_SHIFT 31
#define OPA_16B_FECN_MASK 0x10000000ull
#define OPA_16B_FECN_SHIFT 28
#define OPA_16B_L2_MASK 0x60000000ull
#define OPA_16B_L2_SHIFT 29
#define OPA_16B_PKEY_MASK 0xFFFF0000ull
#define OPA_16B_PKEY_SHIFT 16
#define OPA_16B_LEN_MASK 0x7FF00000ull
#define OPA_16B_LEN_SHIFT 20
#define OPA_16B_RC_MASK 0xE000000ull
#define OPA_16B_RC_SHIFT 25
#define OPA_16B_AGE_MASK 0xFF0000ull
#define OPA_16B_AGE_SHIFT 16
#define OPA_16B_ENTROPY_MASK 0xFFFFull
/*
* OPA 16B L2/L4 Encodings
*/
#define OPA_16B_L4_9B 0x00
#define OPA_16B_L2_TYPE 0x02
#define OPA_16B_L4_FM 0x08
#define OPA_16B_L4_IB_LOCAL 0x09
#define OPA_16B_L4_IB_GLOBAL 0x0A
#define OPA_16B_L4_ETHR OPA_VNIC_L4_ETHR
/*
* OPA 16B Management
*/
#define OPA_16B_L4_FM_PAD 3 /* fixed 3B pad */
#define OPA_16B_L4_FM_HLEN 24 /* 16B(16) + L4_FM(8) */
static inline u8 hfi1_16B_get_l4(struct hfi1_16b_header *hdr)
{
return (u8)(hdr->lrh[2] & OPA_16B_L4_MASK);
}
static inline u8 hfi1_16B_get_sc(struct hfi1_16b_header *hdr)
{
return (u8)((hdr->lrh[1] & OPA_16B_SC_MASK) >> OPA_16B_SC_SHIFT);
}
static inline u32 hfi1_16B_get_dlid(struct hfi1_16b_header *hdr)
{
return (u32)((hdr->lrh[1] & OPA_16B_LID_MASK) |
(((hdr->lrh[2] & OPA_16B_DLID_MASK) >>
OPA_16B_DLID_HIGH_SHIFT) << OPA_16B_DLID_SHIFT));
}
static inline u32 hfi1_16B_get_slid(struct hfi1_16b_header *hdr)
{
return (u32)((hdr->lrh[0] & OPA_16B_LID_MASK) |
(((hdr->lrh[2] & OPA_16B_SLID_MASK) >>
OPA_16B_SLID_HIGH_SHIFT) << OPA_16B_SLID_SHIFT));
}
static inline u8 hfi1_16B_get_becn(struct hfi1_16b_header *hdr)
{
return (u8)((hdr->lrh[0] & OPA_16B_BECN_MASK) >> OPA_16B_BECN_SHIFT);
}
static inline u8 hfi1_16B_get_fecn(struct hfi1_16b_header *hdr)
{
return (u8)((hdr->lrh[1] & OPA_16B_FECN_MASK) >> OPA_16B_FECN_SHIFT);
}
static inline u8 hfi1_16B_get_l2(struct hfi1_16b_header *hdr)
{
return (u8)((hdr->lrh[1] & OPA_16B_L2_MASK) >> OPA_16B_L2_SHIFT);
}
static inline u16 hfi1_16B_get_pkey(struct hfi1_16b_header *hdr)
{
return (u16)((hdr->lrh[2] & OPA_16B_PKEY_MASK) >> OPA_16B_PKEY_SHIFT);
}
static inline u8 hfi1_16B_get_rc(struct hfi1_16b_header *hdr)
{
return (u8)((hdr->lrh[1] & OPA_16B_RC_MASK) >> OPA_16B_RC_SHIFT);
}
static inline u8 hfi1_16B_get_age(struct hfi1_16b_header *hdr)
{
return (u8)((hdr->lrh[3] & OPA_16B_AGE_MASK) >> OPA_16B_AGE_SHIFT);
}
static inline u16 hfi1_16B_get_len(struct hfi1_16b_header *hdr)
{
return (u16)((hdr->lrh[0] & OPA_16B_LEN_MASK) >> OPA_16B_LEN_SHIFT);
}
static inline u16 hfi1_16B_get_entropy(struct hfi1_16b_header *hdr)
{
return (u16)(hdr->lrh[3] & OPA_16B_ENTROPY_MASK);
}
#define OPA_16B_MAKE_QW(low_dw, high_dw) (((u64)(high_dw) << 32) | (low_dw))
/*
* BTH
*/
#define OPA_16B_BTH_PAD_MASK 7
static inline u8 hfi1_16B_bth_get_pad(struct ib_other_headers *ohdr)
{
return (u8)((be32_to_cpu(ohdr->bth[0]) >> IB_BTH_PAD_SHIFT) &
OPA_16B_BTH_PAD_MASK);
}
/*
* 16B Management
*/
#define OPA_16B_MGMT_QPN_MASK 0xFFFFFF
static inline u32 hfi1_16B_get_dest_qpn(struct opa_16b_mgmt *mgmt)
{
return be32_to_cpu(mgmt->dest_qpn) & OPA_16B_MGMT_QPN_MASK;
}
static inline u32 hfi1_16B_get_src_qpn(struct opa_16b_mgmt *mgmt)
{
return be32_to_cpu(mgmt->src_qpn) & OPA_16B_MGMT_QPN_MASK;
}
static inline void hfi1_16B_set_qpn(struct opa_16b_mgmt *mgmt,
u32 dest_qp, u32 src_qp)
{
mgmt->dest_qpn = cpu_to_be32(dest_qp & OPA_16B_MGMT_QPN_MASK);
mgmt->src_qpn = cpu_to_be32(src_qp & OPA_16B_MGMT_QPN_MASK);
}
/**
* hfi1_get_rc_ohdr - get extended header
* @opah - the opaheader
*/
static inline struct ib_other_headers *
hfi1_get_rc_ohdr(struct hfi1_opa_header *opah)
{
struct ib_other_headers *ohdr;
struct ib_header *hdr = NULL;
struct hfi1_16b_header *hdr_16b = NULL;
/* Find out where the BTH is */
if (opah->hdr_type == HFI1_PKT_TYPE_9B) {
hdr = &opah->ibh;
if (ib_get_lnh(hdr) == HFI1_LRH_BTH)
ohdr = &hdr->u.oth;
else
ohdr = &hdr->u.l.oth;
} else {
u8 l4;
hdr_16b = &opah->opah;
l4 = hfi1_16B_get_l4(hdr_16b);
if (l4 == OPA_16B_L4_IB_LOCAL)
ohdr = &hdr_16b->u.oth;
else
ohdr = &hdr_16b->u.l.oth;
}
return ohdr;
}
struct rvt_sge_state;
/*
* Get/Set IB link-level config parameters for f_get/set_ib_cfg()
* Mostly for MADs that set or query link parameters, also ipath
* config interfaces
*/
#define HFI1_IB_CFG_LIDLMC 0 /* LID (LS16b) and Mask (MS16b) */
#define HFI1_IB_CFG_LWID_DG_ENB 1 /* allowed Link-width downgrade */
#define HFI1_IB_CFG_LWID_ENB 2 /* allowed Link-width */
#define HFI1_IB_CFG_LWID 3 /* currently active Link-width */
#define HFI1_IB_CFG_SPD_ENB 4 /* allowed Link speeds */
#define HFI1_IB_CFG_SPD 5 /* current Link spd */
#define HFI1_IB_CFG_RXPOL_ENB 6 /* Auto-RX-polarity enable */
#define HFI1_IB_CFG_LREV_ENB 7 /* Auto-Lane-reversal enable */
#define HFI1_IB_CFG_LINKLATENCY 8 /* Link Latency (IB1.2 only) */
#define HFI1_IB_CFG_HRTBT 9 /* IB heartbeat off/enable/auto; DDR/QDR only */
#define HFI1_IB_CFG_OP_VLS 10 /* operational VLs */
#define HFI1_IB_CFG_VL_HIGH_CAP 11 /* num of VL high priority weights */
#define HFI1_IB_CFG_VL_LOW_CAP 12 /* num of VL low priority weights */
#define HFI1_IB_CFG_OVERRUN_THRESH 13 /* IB overrun threshold */
#define HFI1_IB_CFG_PHYERR_THRESH 14 /* IB PHY error threshold */
#define HFI1_IB_CFG_LINKDEFAULT 15 /* IB link default (sleep/poll) */
#define HFI1_IB_CFG_PKEYS 16 /* update partition keys */
#define HFI1_IB_CFG_MTU 17 /* update MTU in IBC */
#define HFI1_IB_CFG_VL_HIGH_LIMIT 19
#define HFI1_IB_CFG_PMA_TICKS 20 /* PMA sample tick resolution */
#define HFI1_IB_CFG_PORT 21 /* switch port we are connected to */
/*
* HFI or Host Link States
*
* These describe the states the driver thinks the logical and physical
* states are in. Used as an argument to set_link_state(). Implemented
* as bits for easy multi-state checking. The actual state can only be
* one.
*/
#define __HLS_UP_INIT_BP 0
#define __HLS_UP_ARMED_BP 1
#define __HLS_UP_ACTIVE_BP 2
#define __HLS_DN_DOWNDEF_BP 3 /* link down default */
#define __HLS_DN_POLL_BP 4
#define __HLS_DN_DISABLE_BP 5
#define __HLS_DN_OFFLINE_BP 6
#define __HLS_VERIFY_CAP_BP 7
#define __HLS_GOING_UP_BP 8
#define __HLS_GOING_OFFLINE_BP 9
#define __HLS_LINK_COOLDOWN_BP 10
#define HLS_UP_INIT BIT(__HLS_UP_INIT_BP)
#define HLS_UP_ARMED BIT(__HLS_UP_ARMED_BP)
#define HLS_UP_ACTIVE BIT(__HLS_UP_ACTIVE_BP)
#define HLS_DN_DOWNDEF BIT(__HLS_DN_DOWNDEF_BP) /* link down default */
#define HLS_DN_POLL BIT(__HLS_DN_POLL_BP)
#define HLS_DN_DISABLE BIT(__HLS_DN_DISABLE_BP)
#define HLS_DN_OFFLINE BIT(__HLS_DN_OFFLINE_BP)
#define HLS_VERIFY_CAP BIT(__HLS_VERIFY_CAP_BP)
#define HLS_GOING_UP BIT(__HLS_GOING_UP_BP)
#define HLS_GOING_OFFLINE BIT(__HLS_GOING_OFFLINE_BP)
#define HLS_LINK_COOLDOWN BIT(__HLS_LINK_COOLDOWN_BP)
#define HLS_UP (HLS_UP_INIT | HLS_UP_ARMED | HLS_UP_ACTIVE)
#define HLS_DOWN ~(HLS_UP)
#define HLS_DEFAULT HLS_DN_POLL
/* use this MTU size if none other is given */
#define HFI1_DEFAULT_ACTIVE_MTU 10240
/* use this MTU size as the default maximum */
#define HFI1_DEFAULT_MAX_MTU 10240
/* default partition key */
#define DEFAULT_PKEY 0xffff
/*
* Possible fabric manager config parameters for fm_{get,set}_table()
*/
#define FM_TBL_VL_HIGH_ARB 1 /* Get/set VL high prio weights */
#define FM_TBL_VL_LOW_ARB 2 /* Get/set VL low prio weights */
#define FM_TBL_BUFFER_CONTROL 3 /* Get/set Buffer Control */
#define FM_TBL_SC2VLNT 4 /* Get/set SC->VLnt */
#define FM_TBL_VL_PREEMPT_ELEMS 5 /* Get (no set) VL preempt elems */
#define FM_TBL_VL_PREEMPT_MATRIX 6 /* Get (no set) VL preempt matrix */
/*
* Possible "operations" for f_rcvctrl(ppd, op, ctxt)
* these are bits so they can be combined, e.g.
* HFI1_RCVCTRL_INTRAVAIL_ENB | HFI1_RCVCTRL_CTXT_ENB
*/
#define HFI1_RCVCTRL_TAILUPD_ENB 0x01
#define HFI1_RCVCTRL_TAILUPD_DIS 0x02
#define HFI1_RCVCTRL_CTXT_ENB 0x04
#define HFI1_RCVCTRL_CTXT_DIS 0x08
#define HFI1_RCVCTRL_INTRAVAIL_ENB 0x10
#define HFI1_RCVCTRL_INTRAVAIL_DIS 0x20
#define HFI1_RCVCTRL_PKEY_ENB 0x40 /* Note, default is enabled */
#define HFI1_RCVCTRL_PKEY_DIS 0x80
#define HFI1_RCVCTRL_TIDFLOW_ENB 0x0400
#define HFI1_RCVCTRL_TIDFLOW_DIS 0x0800
#define HFI1_RCVCTRL_ONE_PKT_EGR_ENB 0x1000
#define HFI1_RCVCTRL_ONE_PKT_EGR_DIS 0x2000
#define HFI1_RCVCTRL_NO_RHQ_DROP_ENB 0x4000
#define HFI1_RCVCTRL_NO_RHQ_DROP_DIS 0x8000
#define HFI1_RCVCTRL_NO_EGR_DROP_ENB 0x10000
#define HFI1_RCVCTRL_NO_EGR_DROP_DIS 0x20000
#define HFI1_RCVCTRL_URGENT_ENB 0x40000
#define HFI1_RCVCTRL_URGENT_DIS 0x80000
/* partition enforcement flags */
#define HFI1_PART_ENFORCE_IN 0x1
#define HFI1_PART_ENFORCE_OUT 0x2
/* how often we check for synthetic counter wrap around */
IB/hfi1: Fix softlockup issue Soft lockups can occur because the mad processing on different CPUs acquire the spin lock dc8051_lock: [534552.835870] [<ffffffffa026f993>] ? read_dev_port_cntr.isra.37+0x23/0x160 [hfi1] [534552.835880] [<ffffffffa02775af>] read_dev_cntr+0x4f/0x60 [hfi1] [534552.835893] [<ffffffffa028d7cd>] pma_get_opa_portstatus+0x64d/0x8c0 [hfi1] [534552.835904] [<ffffffffa0290e7d>] hfi1_process_mad+0x48d/0x18c0 [hfi1] [534552.835908] [<ffffffff811dc1f1>] ? __slab_free+0x81/0x2f0 [534552.835936] [<ffffffffa024c34e>] ? ib_mad_recv_done+0x21e/0xa30 [ib_core] [534552.835939] [<ffffffff811dd153>] ? __kmalloc+0x1f3/0x240 [534552.835947] [<ffffffffa024c3fb>] ib_mad_recv_done+0x2cb/0xa30 [ib_core] [534552.835955] [<ffffffffa0237c85>] __ib_process_cq+0x55/0xd0 [ib_core] [534552.835962] [<ffffffffa0237d70>] ib_cq_poll_work+0x20/0x60 [ib_core] [534552.835964] [<ffffffff810a7f3b>] process_one_work+0x17b/0x470 [534552.835966] [<ffffffff810a8d76>] worker_thread+0x126/0x410 [534552.835969] [<ffffffff810a8c50>] ? rescuer_thread+0x460/0x460 [534552.835971] [<ffffffff810b052f>] kthread+0xcf/0xe0 [534552.835974] [<ffffffff810b0460>] ? kthread_create_on_node+0x140/0x140 [534552.835977] [<ffffffff81696418>] ret_from_fork+0x58/0x90 [534552.835980] [<ffffffff810b0460>] ? kthread_create_on_node+0x140/0x140 This issue is made worse when the 8051 is busy and the reads take longer. Fix by using a non-spinning lock procure. Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Reviewed-by: Mike Marciszyn <mike.marciniszyn@intel.com> Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-04-28 17:40:02 +00:00
#define SYNTH_CNT_TIME 3
/* Counter flags */
#define CNTR_NORMAL 0x0 /* Normal counters, just read register */
#define CNTR_SYNTH 0x1 /* Synthetic counters, saturate at all 1s */
#define CNTR_DISABLED 0x2 /* Disable this counter */
#define CNTR_32BIT 0x4 /* Simulate 64 bits for this counter */
#define CNTR_VL 0x8 /* Per VL counter */
#define CNTR_SDMA 0x10
#define CNTR_INVALID_VL -1 /* Specifies invalid VL */
#define CNTR_MODE_W 0x0
#define CNTR_MODE_R 0x1
/* VLs Supported/Operational */
#define HFI1_MIN_VLS_SUPPORTED 1
#define HFI1_MAX_VLS_SUPPORTED 8
#define HFI1_GUIDS_PER_PORT 5
#define HFI1_PORT_GUID_INDEX 0
static inline void incr_cntr64(u64 *cntr)
{
if (*cntr < (u64)-1LL)
(*cntr)++;
}
static inline void incr_cntr32(u32 *cntr)
{
if (*cntr < (u32)-1LL)
(*cntr)++;
}
#define MAX_NAME_SIZE 64
struct hfi1_msix_entry {
enum irq_type type;
int irq;
void *arg;
cpumask_t mask;
struct irq_affinity_notify notify;
};
struct hfi1_msix_info {
/* lock to synchronize in_use_msix access */
spinlock_t msix_lock;
DECLARE_BITMAP(in_use_msix, CCE_NUM_MSIX_VECTORS);
struct hfi1_msix_entry *msix_entries;
u16 max_requested;
};
/* per-SL CCA information */
struct cca_timer {
struct hrtimer hrtimer;
struct hfi1_pportdata *ppd; /* read-only */
int sl; /* read-only */
u16 ccti; /* read/write - current value of CCTI */
};
struct link_down_reason {
/*
* SMA-facing value. Should be set from .latest when
* HLS_UP_* -> HLS_DN_* transition actually occurs.
*/
u8 sma;
u8 latest;
};
enum {
LO_PRIO_TABLE,
HI_PRIO_TABLE,
MAX_PRIO_TABLE
};
struct vl_arb_cache {
/* protect vl arb cache */
spinlock_t lock;
struct ib_vl_weight_elem table[VL_ARB_TABLE_SIZE];
};
/*
* The structure below encapsulates data relevant to a physical IB Port.
* Current chips support only one such port, but the separation
* clarifies things a bit. Note that to conform to IB conventions,
* port-numbers are one-based. The first or only port is port1.
*/
struct hfi1_pportdata {
struct hfi1_ibport ibport_data;
struct hfi1_devdata *dd;
struct kobject pport_cc_kobj;
struct kobject sc2vl_kobj;
struct kobject sl2sc_kobj;
struct kobject vl2mtu_kobj;
/* PHY support */
struct qsfp_data qsfp_info;
/* Values for SI tuning of SerDes */
u32 port_type;
u32 tx_preset_eq;
u32 tx_preset_noeq;
u32 rx_preset;
u8 local_atten;
u8 remote_atten;
u8 default_atten;
u8 max_power_class;
/* did we read platform config from scratch registers? */
bool config_from_scratch;
/* GUIDs for this interface, in host order, guids[0] is a port guid */
u64 guids[HFI1_GUIDS_PER_PORT];
/* GUID for peer interface, in host order */
u64 neighbor_guid;
/* up or down physical link state */
u32 linkup;
/*
* this address is mapped read-only into user processes so they can
* get status cheaply, whenever they want. One qword of status per port
*/
u64 *statusp;
/* SendDMA related entries */
struct workqueue_struct *hfi1_wq;
struct workqueue_struct *link_wq;
/* move out of interrupt context */
struct work_struct link_vc_work;
struct work_struct link_up_work;
struct work_struct link_down_work;
struct work_struct sma_message_work;
struct work_struct freeze_work;
struct work_struct link_downgrade_work;
struct work_struct link_bounce_work;
struct delayed_work start_link_work;
/* host link state variables */
struct mutex hls_lock;
u32 host_link_state;
/* these are the "32 bit" regs */
u32 ibmtu; /* The MTU programmed for this unit */
/*
* Current max size IB packet (in bytes) including IB headers, that
* we can send. Changes when ibmtu changes.
*/
u32 ibmaxlen;
u32 current_egress_rate; /* units [10^6 bits/sec] */
/* LID programmed for this instance */
u32 lid;
/* list of pkeys programmed; 0 if not set */
u16 pkeys[MAX_PKEY_VALUES];
u16 link_width_supported;
u16 link_width_downgrade_supported;
u16 link_speed_supported;
u16 link_width_enabled;
u16 link_width_downgrade_enabled;
u16 link_speed_enabled;
u16 link_width_active;
u16 link_width_downgrade_tx_active;
u16 link_width_downgrade_rx_active;
u16 link_speed_active;
u8 vls_supported;
u8 vls_operational;
u8 actual_vls_operational;
/* LID mask control */
u8 lmc;
/* Rx Polarity inversion (compensate for ~tx on partner) */
u8 rx_pol_inv;
u8 hw_pidx; /* physical port index */
u8 port; /* IB port number and index into dd->pports - 1 */
/* type of neighbor node */
u8 neighbor_type;
u8 neighbor_normal;
u8 neighbor_fm_security; /* 1 if firmware checking is disabled */
u8 neighbor_port_number;
u8 is_sm_config_started;
u8 offline_disabled_reason;
u8 is_active_optimize_enabled;
u8 driver_link_ready; /* driver ready for active link */
u8 link_enabled; /* link enabled? */
u8 linkinit_reason;
u8 local_tx_rate; /* rate given to 8051 firmware */
u8 qsfp_retry_count;
/* placeholders for IB MAD packet settings */
u8 overrun_threshold;
u8 phy_error_threshold;
unsigned int is_link_down_queued;
/* Used to override LED behavior for things like maintenance beaconing*/
/*
* Alternates per phase of blink
* [0] holds LED off duration, [1] holds LED on duration
*/
unsigned long led_override_vals[2];
u8 led_override_phase; /* LSB picks from vals[] */
atomic_t led_override_timer_active;
/* Used to flash LEDs in override mode */
struct timer_list led_override_timer;
u32 sm_trap_qp;
u32 sa_qp;
/*
* cca_timer_lock protects access to the per-SL cca_timer
* structures (specifically the ccti member).
*/
spinlock_t cca_timer_lock ____cacheline_aligned_in_smp;
struct cca_timer cca_timer[OPA_MAX_SLS];
/* List of congestion control table entries */
struct ib_cc_table_entry_shadow ccti_entries[CC_TABLE_SHADOW_MAX];
/* congestion entries, each entry corresponding to a SL */
struct opa_congestion_setting_entry_shadow
congestion_entries[OPA_MAX_SLS];
/*
* cc_state_lock protects (write) access to the per-port
* struct cc_state.
*/
spinlock_t cc_state_lock ____cacheline_aligned_in_smp;
struct cc_state __rcu *cc_state;
/* Total number of congestion control table entries */
u16 total_cct_entry;
/* Bit map identifying service level */
u32 cc_sl_control_map;
/* CA's max number of 64 entry units in the congestion control table */
u8 cc_max_table_entries;
/*
* begin congestion log related entries
* cc_log_lock protects all congestion log related data
*/
spinlock_t cc_log_lock ____cacheline_aligned_in_smp;
u8 threshold_cong_event_map[OPA_MAX_SLS / 8];
u16 threshold_event_counter;
struct opa_hfi1_cong_log_event_internal cc_events[OPA_CONG_LOG_ELEMS];
int cc_log_idx; /* index for logging events */
int cc_mad_idx; /* index for reporting events */
/* end congestion log related entries */
struct vl_arb_cache vl_arb_cache[MAX_PRIO_TABLE];
/* port relative counter buffer */
u64 *cntrs;
/* port relative synthetic counter buffer */
u64 *scntrs;
/* port_xmit_discards are synthesized from different egress errors */
u64 port_xmit_discards;
u64 port_xmit_discards_vl[C_VL_COUNT];
u64 port_xmit_constraint_errors;
u64 port_rcv_constraint_errors;
/* count of 'link_err' interrupts from DC */
u64 link_downed;
/* number of times link retrained successfully */
u64 link_up;
/* number of times a link unknown frame was reported */
u64 unknown_frame_count;
/* port_ltp_crc_mode is returned in 'portinfo' MADs */
u16 port_ltp_crc_mode;
/* port_crc_mode_enabled is the crc we support */
u8 port_crc_mode_enabled;
/* mgmt_allowed is also returned in 'portinfo' MADs */
u8 mgmt_allowed;
u8 part_enforce; /* partition enforcement flags */
struct link_down_reason local_link_down_reason;
struct link_down_reason neigh_link_down_reason;
/* Value to be sent to link peer on LinkDown .*/
u8 remote_link_down_reason;
/* Error events that will cause a port bounce. */
u32 port_error_action;
struct work_struct linkstate_active_work;
/* Does this port need to prescan for FECNs */
bool cc_prescan;
/*
* Sample sendWaitCnt & sendWaitVlCnt during link transition
* and counter request.
*/
u64 port_vl_xmit_wait_last[C_VL_COUNT + 1];
u16 prev_link_width;
u64 vl_xmit_flit_cnt[C_VL_COUNT + 1];
};
typedef void (*opcode_handler)(struct hfi1_packet *packet);
typedef void (*hfi1_make_req)(struct rvt_qp *qp,
struct hfi1_pkt_state *ps,
struct rvt_swqe *wqe);
extern const rhf_rcv_function_ptr normal_rhf_rcv_functions[];
/* return values for the RHF receive functions */
#define RHF_RCV_CONTINUE 0 /* keep going */
#define RHF_RCV_DONE 1 /* stop, this packet processed */
#define RHF_RCV_REPROCESS 2 /* stop. retain this packet */
struct rcv_array_data {
u16 ngroups;
u16 nctxt_extra;
u8 group_size;
};
struct per_vl_data {
u16 mtu;
struct send_context *sc;
};
/* 16 to directly index */
#define PER_VL_SEND_CONTEXTS 16
struct err_info_rcvport {
u8 status_and_code;
u64 packet_flit1;
u64 packet_flit2;
};
struct err_info_constraint {
u8 status;
u16 pkey;
u32 slid;
};
struct hfi1_temp {
unsigned int curr; /* current temperature */
unsigned int lo_lim; /* low temperature limit */
unsigned int hi_lim; /* high temperature limit */
unsigned int crit_lim; /* critical temperature limit */
u8 triggers; /* temperature triggers */
};
struct hfi1_i2c_bus {
struct hfi1_devdata *controlling_dd; /* current controlling device */
struct i2c_adapter adapter; /* bus details */
struct i2c_algo_bit_data algo; /* bus algorithm details */
int num; /* bus number, 0 or 1 */
};
/* common data between shared ASIC HFIs */
struct hfi1_asic_data {
struct hfi1_devdata *dds[2]; /* back pointers */
struct mutex asic_resource_mutex;
struct hfi1_i2c_bus *i2c_bus0;
struct hfi1_i2c_bus *i2c_bus1;
};
/* sizes for both the QP and RSM map tables */
#define NUM_MAP_ENTRIES 256
#define NUM_MAP_REGS 32
/*
* Number of VNIC contexts used. Ensure it is less than or equal to
* max queues supported by VNIC (HFI1_VNIC_MAX_QUEUE).
*/
#define HFI1_NUM_VNIC_CTXT 8
/* Number of VNIC RSM entries */
#define NUM_VNIC_MAP_ENTRIES 8
/* Virtual NIC information */
struct hfi1_vnic_data {
struct hfi1_ctxtdata *ctxt[HFI1_NUM_VNIC_CTXT];
struct kmem_cache *txreq_cache;
struct xarray vesws;
u8 num_vports;
u8 rmt_start;
u8 num_ctxt;
};
struct hfi1_vnic_vport_info;
/* device data struct now contains only "general per-device" info.
* fields related to a physical IB port are in a hfi1_pportdata struct.
*/
struct sdma_engine;
struct sdma_vl_map;
#define BOARD_VERS_MAX 96 /* how long the version string can be */
#define SERIAL_MAX 16 /* length of the serial number */
staging/rdma/hfi1: Adaptive PIO for short messages The change requires a new pio_busy field in the iowait structure to track the number of outstanding pios. The new counter together with the sdma counter serve as the basis for a packet by packet decision as to which egress mechanism to use. Since packets given to different egress mechanisms are not ordered, this scheme will preserve the order. The iowait drain/wait mechanisms are extended for a pio case. An additional qp wait flag is added for the PIO drain wait case. Currently the only pio wait is for buffers, so the no_bufs_available() routine name is changed to pio_wait() and a third argument is passed with one of the two pio wait flags to generalize the routine. A module parameter is added to hold a configurable threshold. For now, the module parameter is zero. A heuristic routine is added to return the func pointer of the proper egress routine to use. The heuristic is as follows: - SMI always uses pio - GSI,UD qps <= threshold use pio - UD qps > threadhold use sdma o No coordination with sdma is required because order is not required and this qp pio count is not maintained for UD - RC/UC ONLY packets <= threshold chose as follows: o If sdmas pending, use SDMA o Otherwise use pio and enable the pio tracking count at the time the pio buffer is allocated - RC/UC ONLY packets > threshold use SDMA o If pio's are pending the pio_wait with the new wait flag is called to delay for pios to drain The threshold is potentially reduced by the QP's mtu. The sc_buffer_alloc() has two additional args (a callback, a void *) which are exploited by the RC/UC cases to pass a new complete routine and a qp *. When the shadow ring completes the credit associated with a packet, the new complete routine is called. The verbs_pio_complete() will then decrement the busy count and trigger any drain waiters in qp destroy or reset. Reviewed-by: Jubin John <jubin.john@intel.com> Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-02-14 20:45:36 +00:00
typedef int (*send_routine)(struct rvt_qp *, struct hfi1_pkt_state *, u64);
struct hfi1_devdata {
struct hfi1_ibdev verbs_dev; /* must be first */
/* pointers to related structs for this device */
/* pci access data structure */
struct pci_dev *pcidev;
struct cdev user_cdev;
struct cdev diag_cdev;
struct cdev ui_cdev;
struct device *user_device;
struct device *diag_device;
struct device *ui_device;
IB/hfi1: Fix bar0 mapping to use write combining When the debugpat kernel boot flag is turned on the following traces are printed: [ 1884.793168] x86/PAT: Overlap at 0x90000000-0x92000000 [ 1884.803510] x86/PAT: reserve_memtype added [mem 0x91200000-0x9127ffff], track uncached-minus, req write-combining, ret uncached-minus [ 1884.818167] hfi1 0000:05:00.0: hfi1_0: WC Remapped RcvArray: ffffc9000a980000 The ioremap_wc() clearly is not returning a write combining mapping due to an overlap where the RcvArray is mapped in a uncached mapping prior to creating the proposed write combining mapping. The patch replaces the single base register for uncached CSRs that used to overlap the RcvArray with two mappings. One, kregbase1, from the bar0 up to the RcvArray and another, kregbase2, from the end of the RcvArray to the pio send buffer space. A new dd field, base2_start, is used to convert the zero-based offset in the CSR routines to the correct kregbase1/kregbase2 mapping. A single direct write of the RcvArray CSRs is replaced with hfi1_put_tid() to insure correct access using the new disjoint mapping. Additionally, the kregend field is deleted since it is only ever written. patdebug now shows the RcvArray as write combining: [ 35.688990] x86/PAT: reserve_memtype added [mem 0x91200000-0x9127ffff], track write-combining, req write-combining, ret write-combining To insulate from any potential issues with write combining, all writeq are now flushed in hfi1_put_tid() and rcv_array_wc_fill(). Reviewed-by: Mitko Haralanov <mitko.haralanov@intel.com> Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-07-24 14:45:31 +00:00
/* first mapping up to RcvArray */
u8 __iomem *kregbase1;
resource_size_t physaddr;
IB/hfi1: Fix bar0 mapping to use write combining When the debugpat kernel boot flag is turned on the following traces are printed: [ 1884.793168] x86/PAT: Overlap at 0x90000000-0x92000000 [ 1884.803510] x86/PAT: reserve_memtype added [mem 0x91200000-0x9127ffff], track uncached-minus, req write-combining, ret uncached-minus [ 1884.818167] hfi1 0000:05:00.0: hfi1_0: WC Remapped RcvArray: ffffc9000a980000 The ioremap_wc() clearly is not returning a write combining mapping due to an overlap where the RcvArray is mapped in a uncached mapping prior to creating the proposed write combining mapping. The patch replaces the single base register for uncached CSRs that used to overlap the RcvArray with two mappings. One, kregbase1, from the bar0 up to the RcvArray and another, kregbase2, from the end of the RcvArray to the pio send buffer space. A new dd field, base2_start, is used to convert the zero-based offset in the CSR routines to the correct kregbase1/kregbase2 mapping. A single direct write of the RcvArray CSRs is replaced with hfi1_put_tid() to insure correct access using the new disjoint mapping. Additionally, the kregend field is deleted since it is only ever written. patdebug now shows the RcvArray as write combining: [ 35.688990] x86/PAT: reserve_memtype added [mem 0x91200000-0x9127ffff], track write-combining, req write-combining, ret write-combining To insulate from any potential issues with write combining, all writeq are now flushed in hfi1_put_tid() and rcv_array_wc_fill(). Reviewed-by: Mitko Haralanov <mitko.haralanov@intel.com> Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-07-24 14:45:31 +00:00
/* second uncached mapping from RcvArray to pio send buffers */
u8 __iomem *kregbase2;
/* for detecting offset above kregbase2 address */
u32 base2_start;
/* Per VL data. Enough for all VLs but not all elements are set/used. */
struct per_vl_data vld[PER_VL_SEND_CONTEXTS];
/* send context data */
struct send_context_info *send_contexts;
/* map hardware send contexts to software index */
u8 *hw_to_sw;
/* spinlock for allocating and releasing send context resources */
spinlock_t sc_lock;
/* lock for pio_map */
spinlock_t pio_map_lock;
/* Send Context initialization lock. */
spinlock_t sc_init_lock;
/* lock for sdma_map */
spinlock_t sde_map_lock;
/* array of kernel send contexts */
struct send_context **kernel_send_context;
/* array of vl maps */
struct pio_vl_map __rcu *pio_map;
/* default flags to last descriptor */
u64 default_desc1;
/* fields common to all SDMA engines */
volatile __le64 *sdma_heads_dma; /* DMA'ed by chip */
dma_addr_t sdma_heads_phys;
void *sdma_pad_dma; /* DMA'ed by chip */
dma_addr_t sdma_pad_phys;
/* for deallocation */
size_t sdma_heads_size;
/* num used */
u32 num_sdma;
/* array of engines sized by num_sdma */
struct sdma_engine *per_sdma;
/* array of vl maps */
struct sdma_vl_map __rcu *sdma_map;
/* SPC freeze waitqueue and variable */
wait_queue_head_t sdma_unfreeze_wq;
atomic_t sdma_unfreeze_count;
u32 lcb_access_count; /* count of LCB users */
/* common data between shared ASIC HFIs in this OS */
struct hfi1_asic_data *asic_data;
/* mem-mapped pointer to base of PIO buffers */
void __iomem *piobase;
/*
* write-combining mem-mapped pointer to base of RcvArray
* memory.
*/
void __iomem *rcvarray_wc;
/*
* credit return base - a per-NUMA range of DMA address that
* the chip will use to update the per-context free counter
*/
struct credit_return_base *cr_base;
/* send context numbers and sizes for each type */
struct sc_config_sizes sc_sizes[SC_MAX];
char *boardname; /* human readable board info */
/* reset value */
u64 z_int_counter;
u64 z_rcv_limit;
u64 z_send_schedule;
u64 __percpu *send_schedule;
/* number of reserved contexts for VNIC usage */
u16 num_vnic_contexts;
/* number of receive contexts in use by the driver */
u32 num_rcv_contexts;
/* number of pio send contexts in use by the driver */
u32 num_send_contexts;
/*
* number of ctxts available for PSM open
*/
u32 freectxts;
staging/rdma/hfi1: Add support for enabling/disabling PCIe ASPM hfi1 HW has a high PCIe ASPM L1 exit latency and also advertises an acceptable latency less than actual ASPM latencies. Additional mechanisms than those provided by BIOS/OS are therefore required to enable/disable ASPM for hfi1 to provide acceptable power/performance trade offs. This patch adds this support. By means of a module parameter ASPM can be either (a) always enabled (power save mode) (b) always disabled (performance mode) (c) enabled/disabled dynamically. The dynamic mode implements two heuristics to alleviate possible problems with high ASPM L1 exit latency. ASPM is normally enabled but is disabled if (a) there are any active user space PSM contexts, or (b) for verbs, ASPM is disabled as interrupt activity for a context starts to increase. A few more points about the verbs implementation. In order to reduce lock/cache contention between multiple verbs contexts, some processing is done at the context layer before contending for device layer locks. ASPM is disabled when two interrupts for a context happen within 1 millisec. A timer is scheduled which will re-enable ASPM after 1 second should the interrupt activity cease. Normally, every interrupt, or interrupt-pair should push the timer out further. However, since this might increase the processing load per interrupt, pushing the timer out is postponed for half a second. If after half a second we get two interrupts within 1 millisec the timer is pushed out by another second. Finally, the kernel ASPM API is not used in this patch. This is because this patch does several non-standard things as SW workarounds for HW issues. As mentioned above, it enables ASPM even when advertised actual latencies are greater than acceptable latencies. Also, whereas the kernel API only allows drivers to disable ASPM from driver probe, this patch enables/disables ASPM directly from interrupt context. Due to these reasons the kernel ASPM API was not used. Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Reviewed-by: Dean Luick <dean.luick@intel.com> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-02-03 22:33:06 +00:00
/* total number of available user/PSM contexts */
u32 num_user_contexts;
/* base receive interrupt timeout, in CSR units */
u32 rcv_intr_timeout_csr;
spinlock_t sendctrl_lock; /* protect changes to SendCtrl */
spinlock_t rcvctrl_lock; /* protect changes to RcvCtrl */
spinlock_t uctxt_lock; /* protect rcd changes */
IB/hfi1: Fix softlockup issue Soft lockups can occur because the mad processing on different CPUs acquire the spin lock dc8051_lock: [534552.835870] [<ffffffffa026f993>] ? read_dev_port_cntr.isra.37+0x23/0x160 [hfi1] [534552.835880] [<ffffffffa02775af>] read_dev_cntr+0x4f/0x60 [hfi1] [534552.835893] [<ffffffffa028d7cd>] pma_get_opa_portstatus+0x64d/0x8c0 [hfi1] [534552.835904] [<ffffffffa0290e7d>] hfi1_process_mad+0x48d/0x18c0 [hfi1] [534552.835908] [<ffffffff811dc1f1>] ? __slab_free+0x81/0x2f0 [534552.835936] [<ffffffffa024c34e>] ? ib_mad_recv_done+0x21e/0xa30 [ib_core] [534552.835939] [<ffffffff811dd153>] ? __kmalloc+0x1f3/0x240 [534552.835947] [<ffffffffa024c3fb>] ib_mad_recv_done+0x2cb/0xa30 [ib_core] [534552.835955] [<ffffffffa0237c85>] __ib_process_cq+0x55/0xd0 [ib_core] [534552.835962] [<ffffffffa0237d70>] ib_cq_poll_work+0x20/0x60 [ib_core] [534552.835964] [<ffffffff810a7f3b>] process_one_work+0x17b/0x470 [534552.835966] [<ffffffff810a8d76>] worker_thread+0x126/0x410 [534552.835969] [<ffffffff810a8c50>] ? rescuer_thread+0x460/0x460 [534552.835971] [<ffffffff810b052f>] kthread+0xcf/0xe0 [534552.835974] [<ffffffff810b0460>] ? kthread_create_on_node+0x140/0x140 [534552.835977] [<ffffffff81696418>] ret_from_fork+0x58/0x90 [534552.835980] [<ffffffff810b0460>] ? kthread_create_on_node+0x140/0x140 This issue is made worse when the 8051 is busy and the reads take longer. Fix by using a non-spinning lock procure. Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Reviewed-by: Mike Marciszyn <mike.marciniszyn@intel.com> Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-04-28 17:40:02 +00:00
struct mutex dc8051_lock; /* exclusive access to 8051 */
struct workqueue_struct *update_cntr_wq;
struct work_struct update_cntr_work;
/* exclusive access to 8051 memory */
spinlock_t dc8051_memlock;
int dc8051_timed_out; /* remember if the 8051 timed out */
/*
* A page that will hold event notification bitmaps for all
* contexts. This page will be mapped into all processes.
*/
unsigned long *events;
/*
* per unit status, see also portdata statusp
* mapped read-only into user processes so they can get unit and
* IB link status cheaply
*/
struct hfi1_status *status;
/* revision register shadow */
u64 revision;
/* Base GUID for device (network order) */
u64 base_guid;
/* both sides of the PCIe link are gen3 capable */
u8 link_gen3_capable;
u8 dc_shutdown;
/* localbus width (1, 2,4,8,16,32) from config space */
u32 lbus_width;
/* localbus speed in MHz */
u32 lbus_speed;
int unit; /* unit # of this chip */
int node; /* home node of this chip */
/* save these PCI fields to restore after a reset */
u32 pcibar0;
u32 pcibar1;
u32 pci_rom;
u16 pci_command;
u16 pcie_devctl;
u16 pcie_lnkctl;
u16 pcie_devctl2;
u32 pci_msix0;
u32 pci_tph2;
/*
* ASCII serial number, from flash, large enough for original
* all digit strings, and longer serial number format
*/
u8 serial[SERIAL_MAX];
/* human readable board version */
u8 boardversion[BOARD_VERS_MAX];
u8 lbus_info[32]; /* human readable localbus info */
/* chip major rev, from CceRevision */
u8 majrev;
/* chip minor rev, from CceRevision */
u8 minrev;
/* hardware ID */
u8 hfi1_id;
/* implementation code */
u8 icode;
/* vAU of this device */
u8 vau;
/* vCU of this device */
u8 vcu;
/* link credits of this device */
u16 link_credits;
/* initial vl15 credits to use */
u16 vl15_init;
/*
* Cached value for vl15buf, read during verify cap interrupt. VL15
* credits are to be kept at 0 and set when handling the link-up
* interrupt. This removes the possibility of receiving VL15 MAD
* packets before this HFI is ready.
*/
u16 vl15buf_cached;
/* Misc small ints */
u8 n_krcv_queues;
u8 qos_shift;
u16 irev; /* implementation revision */
u32 dc8051_ver; /* 8051 firmware version */
spinlock_t hfi1_diag_trans_lock; /* protect diag observer ops */
struct platform_config platform_config;
struct platform_config_cache pcfg_cache;
struct diag_client *diag_client;
/* general interrupt: mask of handled interrupts */
u64 gi_mask[CCE_NUM_INT_CSRS];
struct rcv_array_data rcv_entries;
/* cycle length of PS* counters in HW (in picoseconds) */
u16 psxmitwait_check_rate;
/*
* 64 bit synthetic counters
*/
struct timer_list synth_stats_timer;
/* MSI-X information */
struct hfi1_msix_info msix_info;
/*
* device counters
*/
char *cntrnames;
size_t cntrnameslen;
size_t ndevcntrs;
u64 *cntrs;
u64 *scntrs;
/*
* remembered values for synthetic counters
*/
u64 last_tx;
u64 last_rx;
/*
* per-port counters
*/
size_t nportcntrs;
char *portcntrnames;
size_t portcntrnameslen;
struct err_info_rcvport err_info_rcvport;
struct err_info_constraint err_info_rcv_constraint;
struct err_info_constraint err_info_xmit_constraint;
atomic_t drop_packet;
u8 do_drop;
u8 err_info_uncorrectable;
u8 err_info_fmconfig;
/*
* Software counters for the status bits defined by the
* associated error status registers
*/
u64 cce_err_status_cnt[NUM_CCE_ERR_STATUS_COUNTERS];
u64 rcv_err_status_cnt[NUM_RCV_ERR_STATUS_COUNTERS];
u64 misc_err_status_cnt[NUM_MISC_ERR_STATUS_COUNTERS];
u64 send_pio_err_status_cnt[NUM_SEND_PIO_ERR_STATUS_COUNTERS];
u64 send_dma_err_status_cnt[NUM_SEND_DMA_ERR_STATUS_COUNTERS];
u64 send_egress_err_status_cnt[NUM_SEND_EGRESS_ERR_STATUS_COUNTERS];
u64 send_err_status_cnt[NUM_SEND_ERR_STATUS_COUNTERS];
/* Software counter that spans all contexts */
u64 sw_ctxt_err_status_cnt[NUM_SEND_CTXT_ERR_STATUS_COUNTERS];
/* Software counter that spans all DMA engines */
u64 sw_send_dma_eng_err_status_cnt[
NUM_SEND_DMA_ENG_ERR_STATUS_COUNTERS];
/* Software counter that aggregates all cce_err_status errors */
u64 sw_cce_err_status_aggregate;
/* Software counter that aggregates all bypass packet rcv errors */
u64 sw_rcv_bypass_packet_errors;
/* Save the enabled LCB error bits */
u64 lcb_err_en;
IB/{hfi1, rdmavt, qib}: Implement CQ completion vector support Currently the driver doesn't support completion vectors. These are used to indicate which sets of CQs should be grouped together into the same vector. A vector is a CQ processing thread that runs on a specific CPU. If an application has several CQs bound to different completion vectors, and each completion vector runs on different CPUs, then the completion queue workload is balanced. This helps scale as more nodes are used. Implement CQ completion vector support using a global workqueue where a CQ entry is queued to the CPU corresponding to the CQ's completion vector. Since the workqueue is global, it's guaranteed to always be there when queueing CQ entries; Therefore, the RCU locking for cq->rdi->worker in the hot path is superfluous. Each completion vector is assigned to a different CPU. The number of completion vectors available is computed by taking the number of online, physical CPUs from the local NUMA node and subtracting the CPUs used for kernel receive queues and the general interrupt. Special use cases: * If there are no CPUs left for completion vectors, the same CPU for the general interrupt is used; Therefore, there would only be one completion vector available. * For multi-HFI systems, the number of completion vectors available for each device is the total number of completion vectors in the local NUMA node divided by the number of devices in the same NUMA node. If there's a division remainder, the first device to get initialized gets an extra completion vector. Upon a CQ creation, an invalid completion vector could be specified. Handle it as follows: * If the completion vector is less than 0, set it to 0. * Set the completion vector to the result of the passed completion vector moded with the number of device completion vectors available. Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Sebastian Sanchez <sebastian.sanchez@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-05-02 13:43:55 +00:00
struct cpu_mask_set *comp_vect;
int *comp_vect_mappings;
u32 comp_vect_possible_cpus;
/*
* Capability to have different send engines simply by changing a
* pointer value.
*/
send_routine process_pio_send ____cacheline_aligned_in_smp;
staging/rdma/hfi1: Adaptive PIO for short messages The change requires a new pio_busy field in the iowait structure to track the number of outstanding pios. The new counter together with the sdma counter serve as the basis for a packet by packet decision as to which egress mechanism to use. Since packets given to different egress mechanisms are not ordered, this scheme will preserve the order. The iowait drain/wait mechanisms are extended for a pio case. An additional qp wait flag is added for the PIO drain wait case. Currently the only pio wait is for buffers, so the no_bufs_available() routine name is changed to pio_wait() and a third argument is passed with one of the two pio wait flags to generalize the routine. A module parameter is added to hold a configurable threshold. For now, the module parameter is zero. A heuristic routine is added to return the func pointer of the proper egress routine to use. The heuristic is as follows: - SMI always uses pio - GSI,UD qps <= threshold use pio - UD qps > threadhold use sdma o No coordination with sdma is required because order is not required and this qp pio count is not maintained for UD - RC/UC ONLY packets <= threshold chose as follows: o If sdmas pending, use SDMA o Otherwise use pio and enable the pio tracking count at the time the pio buffer is allocated - RC/UC ONLY packets > threshold use SDMA o If pio's are pending the pio_wait with the new wait flag is called to delay for pios to drain The threshold is potentially reduced by the QP's mtu. The sc_buffer_alloc() has two additional args (a callback, a void *) which are exploited by the RC/UC cases to pass a new complete routine and a qp *. When the shadow ring completes the credit associated with a packet, the new complete routine is called. The verbs_pio_complete() will then decrement the busy count and trigger any drain waiters in qp destroy or reset. Reviewed-by: Jubin John <jubin.john@intel.com> Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-02-14 20:45:36 +00:00
send_routine process_dma_send;
void (*pio_inline_send)(struct hfi1_devdata *dd, struct pio_buf *pbuf,
u64 pbc, const void *from, size_t count);
int (*process_vnic_dma_send)(struct hfi1_devdata *dd, u8 q_idx,
struct hfi1_vnic_vport_info *vinfo,
struct sk_buff *skb, u64 pbc, u8 plen);
/* hfi1_pportdata, points to array of (physical) port-specific
* data structs, indexed by pidx (0..n-1)
*/
struct hfi1_pportdata *pport;
/* receive context data */
struct hfi1_ctxtdata **rcd;
u64 __percpu *int_counter;
/* verbs tx opcode stats */
struct hfi1_opcode_stats_perctx __percpu *tx_opstats;
/* device (not port) flags, basically device capabilities */
u16 flags;
/* Number of physical ports available */
u8 num_pports;
/* Lowest context number which can be used by user processes or VNIC */
u8 first_dyn_alloc_ctxt;
/* adding a new field here would make it part of this cacheline */
/* seqlock for sc2vl */
seqlock_t sc2vl_lock ____cacheline_aligned_in_smp;
u64 sc2vl[4];
u64 __percpu *rcv_limit;
/* adding a new field here would make it part of this cacheline */
/* OUI comes from the HW. Used everywhere as 3 separate bytes. */
u8 oui1;
u8 oui2;
u8 oui3;
/* Timer and counter used to detect RcvBufOvflCnt changes */
struct timer_list rcverr_timer;
wait_queue_head_t event_queue;
/* receive context tail dummy address */
__le64 *rcvhdrtail_dummy_kvaddr;
dma_addr_t rcvhdrtail_dummy_dma;
staging/rdma/hfi1: Add support for enabling/disabling PCIe ASPM hfi1 HW has a high PCIe ASPM L1 exit latency and also advertises an acceptable latency less than actual ASPM latencies. Additional mechanisms than those provided by BIOS/OS are therefore required to enable/disable ASPM for hfi1 to provide acceptable power/performance trade offs. This patch adds this support. By means of a module parameter ASPM can be either (a) always enabled (power save mode) (b) always disabled (performance mode) (c) enabled/disabled dynamically. The dynamic mode implements two heuristics to alleviate possible problems with high ASPM L1 exit latency. ASPM is normally enabled but is disabled if (a) there are any active user space PSM contexts, or (b) for verbs, ASPM is disabled as interrupt activity for a context starts to increase. A few more points about the verbs implementation. In order to reduce lock/cache contention between multiple verbs contexts, some processing is done at the context layer before contending for device layer locks. ASPM is disabled when two interrupts for a context happen within 1 millisec. A timer is scheduled which will re-enable ASPM after 1 second should the interrupt activity cease. Normally, every interrupt, or interrupt-pair should push the timer out further. However, since this might increase the processing load per interrupt, pushing the timer out is postponed for half a second. If after half a second we get two interrupts within 1 millisec the timer is pushed out by another second. Finally, the kernel ASPM API is not used in this patch. This is because this patch does several non-standard things as SW workarounds for HW issues. As mentioned above, it enables ASPM even when advertised actual latencies are greater than acceptable latencies. Also, whereas the kernel API only allows drivers to disable ASPM from driver probe, this patch enables/disables ASPM directly from interrupt context. Due to these reasons the kernel ASPM API was not used. Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Reviewed-by: Dean Luick <dean.luick@intel.com> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-02-03 22:33:06 +00:00
u32 rcv_ovfl_cnt;
staging/rdma/hfi1: Add support for enabling/disabling PCIe ASPM hfi1 HW has a high PCIe ASPM L1 exit latency and also advertises an acceptable latency less than actual ASPM latencies. Additional mechanisms than those provided by BIOS/OS are therefore required to enable/disable ASPM for hfi1 to provide acceptable power/performance trade offs. This patch adds this support. By means of a module parameter ASPM can be either (a) always enabled (power save mode) (b) always disabled (performance mode) (c) enabled/disabled dynamically. The dynamic mode implements two heuristics to alleviate possible problems with high ASPM L1 exit latency. ASPM is normally enabled but is disabled if (a) there are any active user space PSM contexts, or (b) for verbs, ASPM is disabled as interrupt activity for a context starts to increase. A few more points about the verbs implementation. In order to reduce lock/cache contention between multiple verbs contexts, some processing is done at the context layer before contending for device layer locks. ASPM is disabled when two interrupts for a context happen within 1 millisec. A timer is scheduled which will re-enable ASPM after 1 second should the interrupt activity cease. Normally, every interrupt, or interrupt-pair should push the timer out further. However, since this might increase the processing load per interrupt, pushing the timer out is postponed for half a second. If after half a second we get two interrupts within 1 millisec the timer is pushed out by another second. Finally, the kernel ASPM API is not used in this patch. This is because this patch does several non-standard things as SW workarounds for HW issues. As mentioned above, it enables ASPM even when advertised actual latencies are greater than acceptable latencies. Also, whereas the kernel API only allows drivers to disable ASPM from driver probe, this patch enables/disables ASPM directly from interrupt context. Due to these reasons the kernel ASPM API was not used. Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Reviewed-by: Dean Luick <dean.luick@intel.com> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2016-02-03 22:33:06 +00:00
/* Serialize ASPM enable/disable between multiple verbs contexts */
spinlock_t aspm_lock;
/* Number of verbs contexts which have disabled ASPM */
atomic_t aspm_disabled_cnt;
/* Keeps track of user space clients */
atomic_t user_refcount;
/* Used to wait for outstanding user space clients before dev removal */
struct completion user_comp;
bool eprom_available; /* true if EPROM is available for this device */
bool aspm_supported; /* Does HW support ASPM */
bool aspm_enabled; /* ASPM state: enabled/disabled */
struct rhashtable *sdma_rht;
struct kobject kobj;
/* vnic data */
struct hfi1_vnic_data vnic;
/* Lock to protect IRQ SRC register access */
spinlock_t irq_src_lock;
};
static inline bool hfi1_vnic_is_rsm_full(struct hfi1_devdata *dd, int spare)
{
return (dd->vnic.rmt_start + spare) > NUM_MAP_ENTRIES;
}
/* 8051 firmware version helper */
#define dc8051_ver(a, b, c) ((a) << 16 | (b) << 8 | (c))
#define dc8051_ver_maj(a) (((a) & 0xff0000) >> 16)
#define dc8051_ver_min(a) (((a) & 0x00ff00) >> 8)
#define dc8051_ver_patch(a) ((a) & 0x0000ff)
/* f_put_tid types */
IB/hfi1: Fix bar0 mapping to use write combining When the debugpat kernel boot flag is turned on the following traces are printed: [ 1884.793168] x86/PAT: Overlap at 0x90000000-0x92000000 [ 1884.803510] x86/PAT: reserve_memtype added [mem 0x91200000-0x9127ffff], track uncached-minus, req write-combining, ret uncached-minus [ 1884.818167] hfi1 0000:05:00.0: hfi1_0: WC Remapped RcvArray: ffffc9000a980000 The ioremap_wc() clearly is not returning a write combining mapping due to an overlap where the RcvArray is mapped in a uncached mapping prior to creating the proposed write combining mapping. The patch replaces the single base register for uncached CSRs that used to overlap the RcvArray with two mappings. One, kregbase1, from the bar0 up to the RcvArray and another, kregbase2, from the end of the RcvArray to the pio send buffer space. A new dd field, base2_start, is used to convert the zero-based offset in the CSR routines to the correct kregbase1/kregbase2 mapping. A single direct write of the RcvArray CSRs is replaced with hfi1_put_tid() to insure correct access using the new disjoint mapping. Additionally, the kregend field is deleted since it is only ever written. patdebug now shows the RcvArray as write combining: [ 35.688990] x86/PAT: reserve_memtype added [mem 0x91200000-0x9127ffff], track write-combining, req write-combining, ret write-combining To insulate from any potential issues with write combining, all writeq are now flushed in hfi1_put_tid() and rcv_array_wc_fill(). Reviewed-by: Mitko Haralanov <mitko.haralanov@intel.com> Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-07-24 14:45:31 +00:00
#define PT_EXPECTED 0
#define PT_EAGER 1
#define PT_INVALID_FLUSH 2
#define PT_INVALID 3
struct tid_rb_node;
struct mmu_rb_node;
struct mmu_rb_handler;
/* Private data for file operations */
struct hfi1_filedata {
struct hfi1_devdata *dd;
struct hfi1_ctxtdata *uctxt;
struct hfi1_user_sdma_comp_q *cq;
struct hfi1_user_sdma_pkt_q *pq;
u16 subctxt;
/* for cpu affinity; -1 if none */
int rec_cpu_num;
u32 tid_n_pinned;
struct mmu_rb_handler *handler;
struct tid_rb_node **entry_to_rb;
spinlock_t tid_lock; /* protect tid_[limit,used] counters */
u32 tid_limit;
u32 tid_used;
u32 *invalid_tids;
u32 invalid_tid_idx;
/* protect invalid_tids array and invalid_tid_idx */
spinlock_t invalid_lock;
struct mm_struct *mm;
};
extern struct xarray hfi1_dev_table;
struct hfi1_devdata *hfi1_lookup(int unit);
static inline unsigned long uctxt_offset(struct hfi1_ctxtdata *uctxt)
{
return (uctxt->ctxt - uctxt->dd->first_dyn_alloc_ctxt) *
HFI1_MAX_SHARED_CTXTS;
}
int hfi1_init(struct hfi1_devdata *dd, int reinit);
int hfi1_count_active_units(void);
int hfi1_diag_add(struct hfi1_devdata *dd);
void hfi1_diag_remove(struct hfi1_devdata *dd);
void handle_linkup_change(struct hfi1_devdata *dd, u32 linkup);
void handle_user_interrupt(struct hfi1_ctxtdata *rcd);
int hfi1_create_rcvhdrq(struct hfi1_devdata *dd, struct hfi1_ctxtdata *rcd);
int hfi1_setup_eagerbufs(struct hfi1_ctxtdata *rcd);
int hfi1_create_kctxts(struct hfi1_devdata *dd);
int hfi1_create_ctxtdata(struct hfi1_pportdata *ppd, int numa,
struct hfi1_ctxtdata **rcd);
void hfi1_free_ctxt(struct hfi1_ctxtdata *rcd);
void hfi1_init_pportdata(struct pci_dev *pdev, struct hfi1_pportdata *ppd,
struct hfi1_devdata *dd, u8 hw_pidx, u8 port);
void hfi1_free_ctxtdata(struct hfi1_devdata *dd, struct hfi1_ctxtdata *rcd);
IB/hfi1: Resolve kernel panics by reference counting receive contexts Base receive contexts can be used by sub contexts. Because of this, resources for the context cannot be completely freed until all sub contexts are done using the base context. Introduce a reference count so that the base receive context can be freed only when all sub contexts are done with it. Use the provided function call for setting default send context integrity rather than the manual method. The cleanup path does not set all variables back to NULL after freeing resources. Since the clean up code can get called more than once, (e.g. during context close and on the error path), it is necessary to make sure that all the variables are NULLed. Possible crash are: BUG: unable to handle kernel paging request at 0000000001908900 IP: read_csr+0x24/0x30 [hfi1] RIP: 0010:read_csr+0x24/0x30 [hfi1] Call Trace: sc_disable+0x40/0x110 [hfi1] hfi1_file_close+0x16f/0x360 [hfi1] __fput+0xe7/0x210 ____fput+0xe/0x10 or kernel BUG at mm/slub.c:3877! RIP: 0010:kfree+0x14f/0x170 Call Trace: hfi1_free_ctxtdata+0x19a/0x2b0 [hfi1] ? hfi1_user_exp_rcv_grp_free+0x73/0x80 [hfi1] hfi1_file_close+0x20f/0x360 [hfi1] __fput+0xe7/0x210 ____fput+0xe/0x10 Fixes: Commit 62239fc6e554 ("IB/hfi1: Clean up on context initialization failure") Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Reviewed-by: Sebastian Sanchez <sebastian.sanchez@intel.com> Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-06-09 23:00:19 +00:00
int hfi1_rcd_put(struct hfi1_ctxtdata *rcd);
IB/hfi1: Close race condition on user context disable and close When disabling and removing a receive context, it is possible for an asynchronous event (i.e IRQ) to occur. Because of this, there is a race between cleaning up the context, and the context being used by the asynchronous event. cpu 0 (context cleanup) rc->ref_count-- (ref_count == 0) hfi1_rcd_free() cpu 1 (IRQ (with rcd index)) rcd_get_by_index() lock ref_count+++ <-- reference count race (WARNING) return rcd unlock cpu 0 hfi1_free_ctxtdata() <-- incorrect free location lock remove rcd from array unlock free rcd This race will cause the following WARNING trace: WARNING: CPU: 0 PID: 175027 at include/linux/kref.h:52 hfi1_rcd_get_by_index+0x84/0xa0 [hfi1] CPU: 0 PID: 175027 Comm: IMB-MPI1 Kdump: loaded Tainted: G OE ------------ 3.10.0-957.el7.x86_64 #1 Hardware name: Intel Corporation S2600KP/S2600KP, BIOS SE5C610.86B.11.01.0076.C4.111920150602 11/19/2015 Call Trace: dump_stack+0x19/0x1b __warn+0xd8/0x100 warn_slowpath_null+0x1d/0x20 hfi1_rcd_get_by_index+0x84/0xa0 [hfi1] is_rcv_urgent_int+0x24/0x90 [hfi1] general_interrupt+0x1b6/0x210 [hfi1] __handle_irq_event_percpu+0x44/0x1c0 handle_irq_event_percpu+0x32/0x80 handle_irq_event+0x3c/0x60 handle_edge_irq+0x7f/0x150 handle_irq+0xe4/0x1a0 do_IRQ+0x4d/0xf0 common_interrupt+0x162/0x162 The race can also lead to a use after free which could be similar to: general protection fault: 0000 1 SMP CPU: 71 PID: 177147 Comm: IMB-MPI1 Kdump: loaded Tainted: G W OE ------------ 3.10.0-957.el7.x86_64 #1 Hardware name: Intel Corporation S2600KP/S2600KP, BIOS SE5C610.86B.11.01.0076.C4.111920150602 11/19/2015 task: ffff9962a8098000 ti: ffff99717a508000 task.ti: ffff99717a508000 __kmalloc+0x94/0x230 Call Trace: ? hfi1_user_sdma_process_request+0x9c8/0x1250 [hfi1] hfi1_user_sdma_process_request+0x9c8/0x1250 [hfi1] hfi1_aio_write+0xba/0x110 [hfi1] do_sync_readv_writev+0x7b/0xd0 do_readv_writev+0xce/0x260 ? handle_mm_fault+0x39d/0x9b0 ? pick_next_task_fair+0x5f/0x1b0 ? sched_clock_cpu+0x85/0xc0 ? __schedule+0x13a/0x890 vfs_writev+0x35/0x60 SyS_writev+0x7f/0x110 system_call_fastpath+0x22/0x27 Use the appropriate kref API to verify access. Reorder context cleanup to ensure context removal before cleanup occurs correctly. Cc: stable@vger.kernel.org # v4.14.0+ Fixes: f683c80ca68e ("IB/hfi1: Resolve kernel panics by reference counting receive contexts") Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-02-26 16:45:35 +00:00
int hfi1_rcd_get(struct hfi1_ctxtdata *rcd);
struct hfi1_ctxtdata *hfi1_rcd_get_by_index_safe(struct hfi1_devdata *dd,
u16 ctxt);
struct hfi1_ctxtdata *hfi1_rcd_get_by_index(struct hfi1_devdata *dd, u16 ctxt);
int handle_receive_interrupt(struct hfi1_ctxtdata *rcd, int thread);
int handle_receive_interrupt_nodma_rtail(struct hfi1_ctxtdata *rcd, int thread);
int handle_receive_interrupt_dma_rtail(struct hfi1_ctxtdata *rcd, int thread);
void set_all_slowpath(struct hfi1_devdata *dd);
extern const struct pci_device_id hfi1_pci_tbl[];
void hfi1_make_ud_req_9B(struct rvt_qp *qp,
struct hfi1_pkt_state *ps,
struct rvt_swqe *wqe);
void hfi1_make_ud_req_16B(struct rvt_qp *qp,
struct hfi1_pkt_state *ps,
struct rvt_swqe *wqe);
/* receive packet handler dispositions */
#define RCV_PKT_OK 0x0 /* keep going */
#define RCV_PKT_LIMIT 0x1 /* stop, hit limit, start thread */
#define RCV_PKT_DONE 0x2 /* stop, no more packets detected */
/* calculate the current RHF address */
static inline __le32 *get_rhf_addr(struct hfi1_ctxtdata *rcd)
{
return (__le32 *)rcd->rcvhdrq + rcd->head + rcd->rhf_offset;
}
int hfi1_reset_device(int);
void receive_interrupt_work(struct work_struct *work);
/* extract service channel from header and rhf */
static inline int hfi1_9B_get_sc5(struct ib_header *hdr, u64 rhf)
{
return ib_get_sc(hdr) | ((!!(rhf_dc_info(rhf))) << 4);
}
#define HFI1_JKEY_WIDTH 16
#define HFI1_JKEY_MASK (BIT(16) - 1)
#define HFI1_ADMIN_JKEY_RANGE 32
/*
* J_KEYs are split and allocated in the following groups:
* 0 - 31 - users with administrator privileges
* 32 - 63 - kernel protocols using KDETH packets
* 64 - 65535 - all other users using KDETH packets
*/
static inline u16 generate_jkey(kuid_t uid)
{
u16 jkey = from_kuid(current_user_ns(), uid) & HFI1_JKEY_MASK;
if (capable(CAP_SYS_ADMIN))
jkey &= HFI1_ADMIN_JKEY_RANGE - 1;
else if (jkey < 64)
jkey |= BIT(HFI1_JKEY_WIDTH - 1);
return jkey;
}
/*
* active_egress_rate
*
* returns the active egress rate in units of [10^6 bits/sec]
*/
static inline u32 active_egress_rate(struct hfi1_pportdata *ppd)
{
u16 link_speed = ppd->link_speed_active;
u16 link_width = ppd->link_width_active;
u32 egress_rate;
if (link_speed == OPA_LINK_SPEED_25G)
egress_rate = 25000;
else /* assume OPA_LINK_SPEED_12_5G */
egress_rate = 12500;
switch (link_width) {
case OPA_LINK_WIDTH_4X:
egress_rate *= 4;
break;
case OPA_LINK_WIDTH_3X:
egress_rate *= 3;
break;
case OPA_LINK_WIDTH_2X:
egress_rate *= 2;
break;
default:
/* assume IB_WIDTH_1X */
break;
}
return egress_rate;
}
/*
* egress_cycles
*
* Returns the number of 'fabric clock cycles' to egress a packet
* of length 'len' bytes, at 'rate' Mbit/s. Since the fabric clock
* rate is (approximately) 805 MHz, the units of the returned value
* are (1/805 MHz).
*/
static inline u32 egress_cycles(u32 len, u32 rate)
{
u32 cycles;
/*
* cycles is:
*
* (length) [bits] / (rate) [bits/sec]
* ---------------------------------------------------
* fabric_clock_period == 1 /(805 * 10^6) [cycles/sec]
*/
cycles = len * 8; /* bits */
cycles *= 805;
cycles /= rate;
return cycles;
}
void set_link_ipg(struct hfi1_pportdata *ppd);
void process_becn(struct hfi1_pportdata *ppd, u8 sl, u32 rlid, u32 lqpn,
u32 rqpn, u8 svc_type);
void return_cnp(struct hfi1_ibport *ibp, struct rvt_qp *qp, u32 remote_qpn,
u16 pkey, u32 slid, u32 dlid, u8 sc5,
const struct ib_grh *old_grh);
void return_cnp_16B(struct hfi1_ibport *ibp, struct rvt_qp *qp,
u32 remote_qpn, u16 pkey, u32 slid, u32 dlid,
u8 sc5, const struct ib_grh *old_grh);
typedef void (*hfi1_handle_cnp)(struct hfi1_ibport *ibp, struct rvt_qp *qp,
u32 remote_qpn, u16 pkey, u32 slid, u32 dlid,
u8 sc5, const struct ib_grh *old_grh);
#define PKEY_CHECK_INVALID -1
int egress_pkey_check(struct hfi1_pportdata *ppd, u32 slid, u16 pkey,
u8 sc5, int8_t s_pkey_index);
#define PACKET_EGRESS_TIMEOUT 350
static inline void pause_for_credit_return(struct hfi1_devdata *dd)
{
/* Pause at least 1us, to ensure chip returns all credits */
u32 usec = cclock_to_ns(dd, PACKET_EGRESS_TIMEOUT) / 1000;
udelay(usec ? usec : 1);
}
/**
* sc_to_vlt() reverse lookup sc to vl
* @dd - devdata
* @sc5 - 5 bit sc
*/
static inline u8 sc_to_vlt(struct hfi1_devdata *dd, u8 sc5)
{
unsigned seq;
u8 rval;
if (sc5 >= OPA_MAX_SCS)
return (u8)(0xff);
do {
seq = read_seqbegin(&dd->sc2vl_lock);
rval = *(((u8 *)dd->sc2vl) + sc5);
} while (read_seqretry(&dd->sc2vl_lock, seq));
return rval;
}
#define PKEY_MEMBER_MASK 0x8000
#define PKEY_LOW_15_MASK 0x7fff
/*
* ingress_pkey_matches_entry - return 1 if the pkey matches ent (ent
* being an entry from the ingress partition key table), return 0
* otherwise. Use the matching criteria for ingress partition keys
* specified in the OPAv1 spec., section 9.10.14.
*/
static inline int ingress_pkey_matches_entry(u16 pkey, u16 ent)
{
u16 mkey = pkey & PKEY_LOW_15_MASK;
u16 ment = ent & PKEY_LOW_15_MASK;
if (mkey == ment) {
/*
* If pkey[15] is clear (limited partition member),
* is bit 15 in the corresponding table element
* clear (limited member)?
*/
if (!(pkey & PKEY_MEMBER_MASK))
return !!(ent & PKEY_MEMBER_MASK);
return 1;
}
return 0;
}
/*
* ingress_pkey_table_search - search the entire pkey table for
* an entry which matches 'pkey'. return 0 if a match is found,
* and 1 otherwise.
*/
static int ingress_pkey_table_search(struct hfi1_pportdata *ppd, u16 pkey)
{
int i;
for (i = 0; i < MAX_PKEY_VALUES; i++) {
if (ingress_pkey_matches_entry(pkey, ppd->pkeys[i]))
return 0;
}
return 1;
}
/*
* ingress_pkey_table_fail - record a failure of ingress pkey validation,
* i.e., increment port_rcv_constraint_errors for the port, and record
* the 'error info' for this failure.
*/
static void ingress_pkey_table_fail(struct hfi1_pportdata *ppd, u16 pkey,
u32 slid)
{
struct hfi1_devdata *dd = ppd->dd;
incr_cntr64(&ppd->port_rcv_constraint_errors);
if (!(dd->err_info_rcv_constraint.status & OPA_EI_STATUS_SMASK)) {
dd->err_info_rcv_constraint.status |= OPA_EI_STATUS_SMASK;
dd->err_info_rcv_constraint.slid = slid;
dd->err_info_rcv_constraint.pkey = pkey;
}
}
/*
* ingress_pkey_check - Return 0 if the ingress pkey is valid, return 1
* otherwise. Use the criteria in the OPAv1 spec, section 9.10.14. idx
* is a hint as to the best place in the partition key table to begin
* searching. This function should not be called on the data path because
* of performance reasons. On datapath pkey check is expected to be done
* by HW and rcv_pkey_check function should be called instead.
*/
static inline int ingress_pkey_check(struct hfi1_pportdata *ppd, u16 pkey,
u8 sc5, u8 idx, u32 slid, bool force)
{
if (!(force) && !(ppd->part_enforce & HFI1_PART_ENFORCE_IN))
return 0;
/* If SC15, pkey[0:14] must be 0x7fff */
if ((sc5 == 0xf) && ((pkey & PKEY_LOW_15_MASK) != PKEY_LOW_15_MASK))
goto bad;
/* Is the pkey = 0x0, or 0x8000? */
if ((pkey & PKEY_LOW_15_MASK) == 0)
goto bad;
/* The most likely matching pkey has index 'idx' */
if (ingress_pkey_matches_entry(pkey, ppd->pkeys[idx]))
return 0;
/* no match - try the whole table */
if (!ingress_pkey_table_search(ppd, pkey))
return 0;
bad:
ingress_pkey_table_fail(ppd, pkey, slid);
return 1;
}
/*
* rcv_pkey_check - Return 0 if the ingress pkey is valid, return 1
* otherwise. It only ensures pkey is vlid for QP0. This function
* should be called on the data path instead of ingress_pkey_check
* as on data path, pkey check is done by HW (except for QP0).
*/
static inline int rcv_pkey_check(struct hfi1_pportdata *ppd, u16 pkey,
u8 sc5, u16 slid)
{
if (!(ppd->part_enforce & HFI1_PART_ENFORCE_IN))
return 0;
/* If SC15, pkey[0:14] must be 0x7fff */
if ((sc5 == 0xf) && ((pkey & PKEY_LOW_15_MASK) != PKEY_LOW_15_MASK))
goto bad;
return 0;
bad:
ingress_pkey_table_fail(ppd, pkey, slid);
return 1;
}
/* MTU handling */
/* MTU enumeration, 256-4k match IB */
#define OPA_MTU_0 0
#define OPA_MTU_256 1
#define OPA_MTU_512 2
#define OPA_MTU_1024 3
#define OPA_MTU_2048 4
#define OPA_MTU_4096 5
u32 lrh_max_header_bytes(struct hfi1_devdata *dd);
int mtu_to_enum(u32 mtu, int default_if_bad);
u16 enum_to_mtu(int mtu);
static inline int valid_ib_mtu(unsigned int mtu)
{
return mtu == 256 || mtu == 512 ||
mtu == 1024 || mtu == 2048 ||
mtu == 4096;
}
static inline int valid_opa_max_mtu(unsigned int mtu)
{
return mtu >= 2048 &&
(valid_ib_mtu(mtu) || mtu == 8192 || mtu == 10240);
}
int set_mtu(struct hfi1_pportdata *ppd);
int hfi1_set_lid(struct hfi1_pportdata *ppd, u32 lid, u8 lmc);
void hfi1_disable_after_error(struct hfi1_devdata *dd);
int hfi1_set_uevent_bits(struct hfi1_pportdata *ppd, const int evtbit);
int hfi1_rcvbuf_validate(u32 size, u8 type, u16 *encode);
int fm_get_table(struct hfi1_pportdata *ppd, int which, void *t);
int fm_set_table(struct hfi1_pportdata *ppd, int which, void *t);
void set_up_vau(struct hfi1_devdata *dd, u8 vau);
void set_up_vl15(struct hfi1_devdata *dd, u16 vl15buf);
void reset_link_credits(struct hfi1_devdata *dd);
void assign_remote_cm_au_table(struct hfi1_devdata *dd, u8 vcu);
int set_buffer_control(struct hfi1_pportdata *ppd, struct buffer_control *bc);
static inline struct hfi1_devdata *dd_from_ppd(struct hfi1_pportdata *ppd)
{
return ppd->dd;
}
static inline struct hfi1_devdata *dd_from_dev(struct hfi1_ibdev *dev)
{
return container_of(dev, struct hfi1_devdata, verbs_dev);
}
static inline struct hfi1_devdata *dd_from_ibdev(struct ib_device *ibdev)
{
return dd_from_dev(to_idev(ibdev));
}
static inline struct hfi1_pportdata *ppd_from_ibp(struct hfi1_ibport *ibp)
{
return container_of(ibp, struct hfi1_pportdata, ibport_data);
}
static inline struct hfi1_ibdev *dev_from_rdi(struct rvt_dev_info *rdi)
{
return container_of(rdi, struct hfi1_ibdev, rdi);
}
static inline struct hfi1_ibport *to_iport(struct ib_device *ibdev, u8 port)
{
struct hfi1_devdata *dd = dd_from_ibdev(ibdev);
unsigned pidx = port - 1; /* IB number port from 1, hdw from 0 */
WARN_ON(pidx >= dd->num_pports);
return &dd->pport[pidx].ibport_data;
}
static inline struct hfi1_ibport *rcd_to_iport(struct hfi1_ctxtdata *rcd)
{
return &rcd->ppd->ibport_data;
}
/**
* hfi1_may_ecn - Check whether FECN or BECN processing should be done
* @pkt: the packet to be evaluated
*
* Check whether the FECN or BECN bits in the packet's header are
* enabled, depending on packet type.
*
* This function only checks for FECN and BECN bits. Additional checks
* are done in the slowpath (hfi1_process_ecn_slowpath()) in order to
* ensure correct handling.
*/
static inline bool hfi1_may_ecn(struct hfi1_packet *pkt)
{
bool fecn, becn;
if (pkt->etype == RHF_RCV_TYPE_BYPASS) {
fecn = hfi1_16B_get_fecn(pkt->hdr);
becn = hfi1_16B_get_becn(pkt->hdr);
} else {
fecn = ib_bth_get_fecn(pkt->ohdr);
becn = ib_bth_get_becn(pkt->ohdr);
}
return fecn || becn;
}
bool hfi1_process_ecn_slowpath(struct rvt_qp *qp, struct hfi1_packet *pkt,
bool prescan);
static inline bool process_ecn(struct rvt_qp *qp, struct hfi1_packet *pkt)
{
bool do_work;
do_work = hfi1_may_ecn(pkt);
if (unlikely(do_work))
return hfi1_process_ecn_slowpath(qp, pkt, false);
return false;
}
/*
* Return the indexed PKEY from the port PKEY table.
*/
static inline u16 hfi1_get_pkey(struct hfi1_ibport *ibp, unsigned index)
{
struct hfi1_pportdata *ppd = ppd_from_ibp(ibp);
u16 ret;
if (index >= ARRAY_SIZE(ppd->pkeys))
ret = 0;
else
ret = ppd->pkeys[index];
return ret;
}
/*
* Return the indexed GUID from the port GUIDs table.
*/
static inline __be64 get_sguid(struct hfi1_ibport *ibp, unsigned int index)
{
struct hfi1_pportdata *ppd = ppd_from_ibp(ibp);
WARN_ON(index >= HFI1_GUIDS_PER_PORT);
return cpu_to_be64(ppd->guids[index]);
}
/*
* Called by readers of cc_state only, must call under rcu_read_lock().
*/
static inline struct cc_state *get_cc_state(struct hfi1_pportdata *ppd)
{
return rcu_dereference(ppd->cc_state);
}
/*
* Called by writers of cc_state only, must call under cc_state_lock.
*/
static inline
struct cc_state *get_cc_state_protected(struct hfi1_pportdata *ppd)
{
return rcu_dereference_protected(ppd->cc_state,
lockdep_is_held(&ppd->cc_state_lock));
}
/*
* values for dd->flags (_device_ related flags)
*/
#define HFI1_INITTED 0x1 /* chip and driver up and initted */
#define HFI1_PRESENT 0x2 /* chip accesses can be done */
#define HFI1_FROZEN 0x4 /* chip in SPC freeze */
#define HFI1_HAS_SDMA_TIMEOUT 0x8
#define HFI1_HAS_SEND_DMA 0x10 /* Supports Send DMA */
#define HFI1_FORCED_FREEZE 0x80 /* driver forced freeze mode */
#define HFI1_SHUTDOWN 0x100 /* device is shutting down */
/* IB dword length mask in PBC (lower 11 bits); same for all chips */
#define HFI1_PBC_LENGTH_MASK ((1 << 11) - 1)
/* ctxt_flag bit offsets */
/* base context has not finished initializing */
#define HFI1_CTXT_BASE_UNINIT 1
/* base context initaliation failed */
#define HFI1_CTXT_BASE_FAILED 2
/* waiting for a packet to arrive */
#define HFI1_CTXT_WAITING_RCV 3
/* waiting for an urgent packet to arrive */
#define HFI1_CTXT_WAITING_URG 4
/* free up any allocated data at closes */
int hfi1_init_dd(struct hfi1_devdata *dd);
void hfi1_free_devdata(struct hfi1_devdata *dd);
/* LED beaconing functions */
void hfi1_start_led_override(struct hfi1_pportdata *ppd, unsigned int timeon,
unsigned int timeoff);
void shutdown_led_override(struct hfi1_pportdata *ppd);
#define HFI1_CREDIT_RETURN_RATE (100)
/*
* The number of words for the KDETH protocol field. If this is
* larger then the actual field used, then part of the payload
* will be in the header.
*
* Optimally, we want this sized so that a typical case will
* use full cache lines. The typical local KDETH header would
* be:
*
* Bytes Field
* 8 LRH
* 12 BHT
* ?? KDETH
* 8 RHF
* ---
* 28 + KDETH
*
* For a 64-byte cache line, KDETH would need to be 36 bytes or 9 DWORDS
*/
#define DEFAULT_RCVHDRSIZE 9
/*
* Maximal header byte count:
*
* Bytes Field
* 8 LRH
* 40 GRH (optional)
* 12 BTH
* ?? KDETH
* 8 RHF
* ---
* 68 + KDETH
*
* We also want to maintain a cache line alignment to assist DMA'ing
* of the header bytes. Round up to a good size.
*/
#define DEFAULT_RCVHDR_ENTSIZE 32
bool hfi1_can_pin_pages(struct hfi1_devdata *dd, struct mm_struct *mm,
u32 nlocked, u32 npages);
int hfi1_acquire_user_pages(struct mm_struct *mm, unsigned long vaddr,
size_t npages, bool writable, struct page **pages);
void hfi1_release_user_pages(struct mm_struct *mm, struct page **p,
size_t npages, bool dirty);
static inline void clear_rcvhdrtail(const struct hfi1_ctxtdata *rcd)
{
*((u64 *)rcd->rcvhdrtail_kvaddr) = 0ULL;
}
static inline u32 get_rcvhdrtail(const struct hfi1_ctxtdata *rcd)
{
/*
* volatile because it's a DMA target from the chip, routine is
* inlined, and don't want register caching or reordering.
*/
return (u32)le64_to_cpu(*rcd->rcvhdrtail_kvaddr);
}
/*
* sysfs interface.
*/
extern const char ib_hfi1_version[];
extern const struct attribute_group ib_hfi1_attr_group;
int hfi1_device_create(struct hfi1_devdata *dd);
void hfi1_device_remove(struct hfi1_devdata *dd);
int hfi1_create_port_files(struct ib_device *ibdev, u8 port_num,
struct kobject *kobj);
int hfi1_verbs_register_sysfs(struct hfi1_devdata *dd);
void hfi1_verbs_unregister_sysfs(struct hfi1_devdata *dd);
/* Hook for sysfs read of QSFP */
int qsfp_dump(struct hfi1_pportdata *ppd, char *buf, int len);
int hfi1_pcie_init(struct hfi1_devdata *dd);
void hfi1_pcie_cleanup(struct pci_dev *pdev);
int hfi1_pcie_ddinit(struct hfi1_devdata *dd, struct pci_dev *pdev);
void hfi1_pcie_ddcleanup(struct hfi1_devdata *);
int pcie_speeds(struct hfi1_devdata *dd);
int restore_pci_variables(struct hfi1_devdata *dd);
int save_pci_variables(struct hfi1_devdata *dd);
int do_pcie_gen3_transition(struct hfi1_devdata *dd);
void tune_pcie_caps(struct hfi1_devdata *dd);
int parse_platform_config(struct hfi1_devdata *dd);
int get_platform_config_field(struct hfi1_devdata *dd,
enum platform_config_table_type_encoding
table_type, int table_index, int field_index,
u32 *data, u32 len);
struct pci_dev *get_pci_dev(struct rvt_dev_info *rdi);
/*
* Flush write combining store buffers (if present) and perform a write
* barrier.
*/
static inline void flush_wc(void)
{
asm volatile("sfence" : : : "memory");
}
void handle_eflags(struct hfi1_packet *packet);
void seqfile_dump_rcd(struct seq_file *s, struct hfi1_ctxtdata *rcd);
/* global module parameter variables */
extern unsigned int hfi1_max_mtu;
extern unsigned int hfi1_cu;
extern unsigned int user_credit_return_threshold;
extern int num_user_contexts;
extern unsigned long n_krcvqs;
extern uint krcvqs[];
extern int krcvqsset;
extern uint kdeth_qp;
extern uint loopback;
extern uint quick_linkup;
extern uint rcv_intr_timeout;
extern uint rcv_intr_count;
extern uint rcv_intr_dynamic;
extern ushort link_crc_mask;
extern struct mutex hfi1_mutex;
/* Number of seconds before our card status check... */
#define STATUS_TIMEOUT 60
#define DRIVER_NAME "hfi1"
#define HFI1_USER_MINOR_BASE 0
#define HFI1_TRACE_MINOR 127
#define HFI1_NMINORS 255
#define PCI_VENDOR_ID_INTEL 0x8086
#define PCI_DEVICE_ID_INTEL0 0x24f0
#define PCI_DEVICE_ID_INTEL1 0x24f1
#define HFI1_PKT_USER_SC_INTEGRITY \
(SEND_CTXT_CHECK_ENABLE_DISALLOW_NON_KDETH_PACKETS_SMASK \
| SEND_CTXT_CHECK_ENABLE_DISALLOW_KDETH_PACKETS_SMASK \
| SEND_CTXT_CHECK_ENABLE_DISALLOW_BYPASS_SMASK \
| SEND_CTXT_CHECK_ENABLE_DISALLOW_GRH_SMASK)
#define HFI1_PKT_KERNEL_SC_INTEGRITY \
(SEND_CTXT_CHECK_ENABLE_DISALLOW_KDETH_PACKETS_SMASK)
static inline u64 hfi1_pkt_default_send_ctxt_mask(struct hfi1_devdata *dd,
u16 ctxt_type)
{
u64 base_sc_integrity;
/* No integrity checks if HFI1_CAP_NO_INTEGRITY is set */
if (HFI1_CAP_IS_KSET(NO_INTEGRITY))
return 0;
base_sc_integrity =
SEND_CTXT_CHECK_ENABLE_DISALLOW_BYPASS_BAD_PKT_LEN_SMASK
| SEND_CTXT_CHECK_ENABLE_DISALLOW_PBC_STATIC_RATE_CONTROL_SMASK
| SEND_CTXT_CHECK_ENABLE_DISALLOW_TOO_LONG_BYPASS_PACKETS_SMASK
| SEND_CTXT_CHECK_ENABLE_DISALLOW_TOO_LONG_IB_PACKETS_SMASK
| SEND_CTXT_CHECK_ENABLE_DISALLOW_BAD_PKT_LEN_SMASK
IB/hfi1: Rework fault injection machinery The packet fault injection code present in the HFI1 driver had some issues which not only fragment the code but also created user confusion. Furthermore, it suffered from the following issues: 1. The fault_packet method only worked for received packets. This meant that the only fault injection mode available for sent packets is fault_opcode, which did not allow for random packet drops on all egressing packets. 2. The mask available for the fault_opcode mode did not really work due to the fact that the opcode values are not bits in a bitmask but rather sequential integer values. Creating a opcode/mask pair that would successfully capture a set of packets was nearly impossible. 3. The code was fragmented and used too many debugfs entries to operate and control. This was confusing to users. 4. It did not allow filtering fault injection on a per direction basis - egress vs. ingress. In order to improve or fix the above issues, the following changes have been made: 1. The fault injection methods have been combined into a single fault injection facility. As such, the fault injection has been plugged into both the send and receive code paths. Regardless of method used the fault injection will operate on both egress and ingress packets. 2. The type of fault injection - by packet or by opcode - is now controlled by changing the boolean value of the file "opcode_mode". When the value is set to True, fault injection is done by opcode. Otherwise, by packet. 2. The masking ability has been removed in favor of a bitmap that holds opcodes of interest (one bit per opcode, a total of 256 bits). This works in tandem with the "opcode_mode" value. When the value of "opcode_mode" is False, this bitmap is ignored. When the value is True, the bitmap lists all opcodes to be considered for fault injection. By default, the bitmap is empty. When the user wants to filter by opcode, the user sets the corresponding bit in the bitmap by echo'ing the bit position into the 'opcodes' file. This gets around the issue that the set of opcodes does not lend itself to effective masks and allow for extremely fine-grained filtering by opcode. 4. fault_packet and fault_opcode methods have been combined. Hence, there is only one debugfs directory controlling the entire operation of the fault injection machinery. This reduces the number of debugfs entries and provides a more unified user experience. 5. A new control files - "direction" - is provided to allow the user to control the direction of packets, which are subject to fault injection. 6. A new control file - "skip_usec" - is added that would allow the user to specify a "timeout" during which no fault injection will occur. In addition, the following bug fixes have been applied: 1. The fault injection code has been split into its own header and source files. This was done to better organize the code and support conditional compilation without littering the code with #ifdef's. 2. The method by which the TX PIO packets were being marked for drop conflicted with the way send contexts were being setup. As a result, the send context was repeatedly being reset. 3. The fault injection only makes sense when the user can control it through the debugfs entries. However, a kernel configuration can enable fault injection but keep fault injection debugfs entries disabled. Therefore, it makes sense that the HFI fault injection code depends on both. 4. Error suppression did not take into account the method by which PIO packets were being dropped. Therefore, even with error suppression turned on, errors would still be displayed to the screen. A larger enough packet drop percentage would case the kernel to crash because the driver would be stuck printing errors. Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Reviewed-by: Don Hiatt <don.hiatt@intel.com> Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Mitko Haralanov <mitko.haralanov@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-05-02 13:43:24 +00:00
#ifndef CONFIG_FAULT_INJECTION
| SEND_CTXT_CHECK_ENABLE_DISALLOW_PBC_TEST_SMASK
IB/hfi1: Rework fault injection machinery The packet fault injection code present in the HFI1 driver had some issues which not only fragment the code but also created user confusion. Furthermore, it suffered from the following issues: 1. The fault_packet method only worked for received packets. This meant that the only fault injection mode available for sent packets is fault_opcode, which did not allow for random packet drops on all egressing packets. 2. The mask available for the fault_opcode mode did not really work due to the fact that the opcode values are not bits in a bitmask but rather sequential integer values. Creating a opcode/mask pair that would successfully capture a set of packets was nearly impossible. 3. The code was fragmented and used too many debugfs entries to operate and control. This was confusing to users. 4. It did not allow filtering fault injection on a per direction basis - egress vs. ingress. In order to improve or fix the above issues, the following changes have been made: 1. The fault injection methods have been combined into a single fault injection facility. As such, the fault injection has been plugged into both the send and receive code paths. Regardless of method used the fault injection will operate on both egress and ingress packets. 2. The type of fault injection - by packet or by opcode - is now controlled by changing the boolean value of the file "opcode_mode". When the value is set to True, fault injection is done by opcode. Otherwise, by packet. 2. The masking ability has been removed in favor of a bitmap that holds opcodes of interest (one bit per opcode, a total of 256 bits). This works in tandem with the "opcode_mode" value. When the value of "opcode_mode" is False, this bitmap is ignored. When the value is True, the bitmap lists all opcodes to be considered for fault injection. By default, the bitmap is empty. When the user wants to filter by opcode, the user sets the corresponding bit in the bitmap by echo'ing the bit position into the 'opcodes' file. This gets around the issue that the set of opcodes does not lend itself to effective masks and allow for extremely fine-grained filtering by opcode. 4. fault_packet and fault_opcode methods have been combined. Hence, there is only one debugfs directory controlling the entire operation of the fault injection machinery. This reduces the number of debugfs entries and provides a more unified user experience. 5. A new control files - "direction" - is provided to allow the user to control the direction of packets, which are subject to fault injection. 6. A new control file - "skip_usec" - is added that would allow the user to specify a "timeout" during which no fault injection will occur. In addition, the following bug fixes have been applied: 1. The fault injection code has been split into its own header and source files. This was done to better organize the code and support conditional compilation without littering the code with #ifdef's. 2. The method by which the TX PIO packets were being marked for drop conflicted with the way send contexts were being setup. As a result, the send context was repeatedly being reset. 3. The fault injection only makes sense when the user can control it through the debugfs entries. However, a kernel configuration can enable fault injection but keep fault injection debugfs entries disabled. Therefore, it makes sense that the HFI fault injection code depends on both. 4. Error suppression did not take into account the method by which PIO packets were being dropped. Therefore, even with error suppression turned on, errors would still be displayed to the screen. A larger enough packet drop percentage would case the kernel to crash because the driver would be stuck printing errors. Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Reviewed-by: Don Hiatt <don.hiatt@intel.com> Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Mitko Haralanov <mitko.haralanov@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-05-02 13:43:24 +00:00
#endif
| SEND_CTXT_CHECK_ENABLE_DISALLOW_TOO_SMALL_BYPASS_PACKETS_SMASK
| SEND_CTXT_CHECK_ENABLE_DISALLOW_TOO_SMALL_IB_PACKETS_SMASK
| SEND_CTXT_CHECK_ENABLE_DISALLOW_RAW_IPV6_SMASK
| SEND_CTXT_CHECK_ENABLE_DISALLOW_RAW_SMASK
| SEND_CTXT_CHECK_ENABLE_CHECK_BYPASS_VL_MAPPING_SMASK
| SEND_CTXT_CHECK_ENABLE_CHECK_VL_MAPPING_SMASK
| SEND_CTXT_CHECK_ENABLE_CHECK_OPCODE_SMASK
| SEND_CTXT_CHECK_ENABLE_CHECK_SLID_SMASK
| SEND_CTXT_CHECK_ENABLE_CHECK_VL_SMASK
| SEND_CTXT_CHECK_ENABLE_CHECK_ENABLE_SMASK;
if (ctxt_type == SC_USER)
IB/hfi1: Rework fault injection machinery The packet fault injection code present in the HFI1 driver had some issues which not only fragment the code but also created user confusion. Furthermore, it suffered from the following issues: 1. The fault_packet method only worked for received packets. This meant that the only fault injection mode available for sent packets is fault_opcode, which did not allow for random packet drops on all egressing packets. 2. The mask available for the fault_opcode mode did not really work due to the fact that the opcode values are not bits in a bitmask but rather sequential integer values. Creating a opcode/mask pair that would successfully capture a set of packets was nearly impossible. 3. The code was fragmented and used too many debugfs entries to operate and control. This was confusing to users. 4. It did not allow filtering fault injection on a per direction basis - egress vs. ingress. In order to improve or fix the above issues, the following changes have been made: 1. The fault injection methods have been combined into a single fault injection facility. As such, the fault injection has been plugged into both the send and receive code paths. Regardless of method used the fault injection will operate on both egress and ingress packets. 2. The type of fault injection - by packet or by opcode - is now controlled by changing the boolean value of the file "opcode_mode". When the value is set to True, fault injection is done by opcode. Otherwise, by packet. 2. The masking ability has been removed in favor of a bitmap that holds opcodes of interest (one bit per opcode, a total of 256 bits). This works in tandem with the "opcode_mode" value. When the value of "opcode_mode" is False, this bitmap is ignored. When the value is True, the bitmap lists all opcodes to be considered for fault injection. By default, the bitmap is empty. When the user wants to filter by opcode, the user sets the corresponding bit in the bitmap by echo'ing the bit position into the 'opcodes' file. This gets around the issue that the set of opcodes does not lend itself to effective masks and allow for extremely fine-grained filtering by opcode. 4. fault_packet and fault_opcode methods have been combined. Hence, there is only one debugfs directory controlling the entire operation of the fault injection machinery. This reduces the number of debugfs entries and provides a more unified user experience. 5. A new control files - "direction" - is provided to allow the user to control the direction of packets, which are subject to fault injection. 6. A new control file - "skip_usec" - is added that would allow the user to specify a "timeout" during which no fault injection will occur. In addition, the following bug fixes have been applied: 1. The fault injection code has been split into its own header and source files. This was done to better organize the code and support conditional compilation without littering the code with #ifdef's. 2. The method by which the TX PIO packets were being marked for drop conflicted with the way send contexts were being setup. As a result, the send context was repeatedly being reset. 3. The fault injection only makes sense when the user can control it through the debugfs entries. However, a kernel configuration can enable fault injection but keep fault injection debugfs entries disabled. Therefore, it makes sense that the HFI fault injection code depends on both. 4. Error suppression did not take into account the method by which PIO packets were being dropped. Therefore, even with error suppression turned on, errors would still be displayed to the screen. A larger enough packet drop percentage would case the kernel to crash because the driver would be stuck printing errors. Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Reviewed-by: Don Hiatt <don.hiatt@intel.com> Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by: Mitko Haralanov <mitko.haralanov@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2018-05-02 13:43:24 +00:00
base_sc_integrity |=
#ifndef CONFIG_FAULT_INJECTION
SEND_CTXT_CHECK_ENABLE_DISALLOW_PBC_TEST_SMASK |
#endif
HFI1_PKT_USER_SC_INTEGRITY;
else if (ctxt_type != SC_KERNEL)
base_sc_integrity |= HFI1_PKT_KERNEL_SC_INTEGRITY;
/* turn on send-side job key checks if !A0 */
if (!is_ax(dd))
base_sc_integrity |= SEND_CTXT_CHECK_ENABLE_CHECK_JOB_KEY_SMASK;
return base_sc_integrity;
}
static inline u64 hfi1_pkt_base_sdma_integrity(struct hfi1_devdata *dd)
{
u64 base_sdma_integrity;
/* No integrity checks if HFI1_CAP_NO_INTEGRITY is set */
if (HFI1_CAP_IS_KSET(NO_INTEGRITY))
return 0;
base_sdma_integrity =
SEND_DMA_CHECK_ENABLE_DISALLOW_BYPASS_BAD_PKT_LEN_SMASK
| SEND_DMA_CHECK_ENABLE_DISALLOW_TOO_LONG_BYPASS_PACKETS_SMASK
| SEND_DMA_CHECK_ENABLE_DISALLOW_TOO_LONG_IB_PACKETS_SMASK
| SEND_DMA_CHECK_ENABLE_DISALLOW_BAD_PKT_LEN_SMASK
| SEND_DMA_CHECK_ENABLE_DISALLOW_TOO_SMALL_BYPASS_PACKETS_SMASK
| SEND_DMA_CHECK_ENABLE_DISALLOW_TOO_SMALL_IB_PACKETS_SMASK
| SEND_DMA_CHECK_ENABLE_DISALLOW_RAW_IPV6_SMASK
| SEND_DMA_CHECK_ENABLE_DISALLOW_RAW_SMASK
| SEND_DMA_CHECK_ENABLE_CHECK_BYPASS_VL_MAPPING_SMASK
| SEND_DMA_CHECK_ENABLE_CHECK_VL_MAPPING_SMASK
| SEND_DMA_CHECK_ENABLE_CHECK_OPCODE_SMASK
| SEND_DMA_CHECK_ENABLE_CHECK_SLID_SMASK
| SEND_DMA_CHECK_ENABLE_CHECK_VL_SMASK
| SEND_DMA_CHECK_ENABLE_CHECK_ENABLE_SMASK;
if (!HFI1_CAP_IS_KSET(STATIC_RATE_CTRL))
base_sdma_integrity |=
SEND_DMA_CHECK_ENABLE_DISALLOW_PBC_STATIC_RATE_CONTROL_SMASK;
/* turn on send-side job key checks if !A0 */
if (!is_ax(dd))
base_sdma_integrity |=
SEND_DMA_CHECK_ENABLE_CHECK_JOB_KEY_SMASK;
return base_sdma_integrity;
}
#define dd_dev_emerg(dd, fmt, ...) \
dev_emerg(&(dd)->pcidev->dev, "%s: " fmt, \
rvt_get_ibdev_name(&(dd)->verbs_dev.rdi), ##__VA_ARGS__)
#define dd_dev_err(dd, fmt, ...) \
dev_err(&(dd)->pcidev->dev, "%s: " fmt, \
rvt_get_ibdev_name(&(dd)->verbs_dev.rdi), ##__VA_ARGS__)
#define dd_dev_err_ratelimited(dd, fmt, ...) \
dev_err_ratelimited(&(dd)->pcidev->dev, "%s: " fmt, \
rvt_get_ibdev_name(&(dd)->verbs_dev.rdi), \
##__VA_ARGS__)
#define dd_dev_warn(dd, fmt, ...) \
dev_warn(&(dd)->pcidev->dev, "%s: " fmt, \
rvt_get_ibdev_name(&(dd)->verbs_dev.rdi), ##__VA_ARGS__)
#define dd_dev_warn_ratelimited(dd, fmt, ...) \
dev_warn_ratelimited(&(dd)->pcidev->dev, "%s: " fmt, \
rvt_get_ibdev_name(&(dd)->verbs_dev.rdi), \
##__VA_ARGS__)
#define dd_dev_info(dd, fmt, ...) \
dev_info(&(dd)->pcidev->dev, "%s: " fmt, \
rvt_get_ibdev_name(&(dd)->verbs_dev.rdi), ##__VA_ARGS__)
#define dd_dev_info_ratelimited(dd, fmt, ...) \
dev_info_ratelimited(&(dd)->pcidev->dev, "%s: " fmt, \
rvt_get_ibdev_name(&(dd)->verbs_dev.rdi), \
##__VA_ARGS__)
#define dd_dev_dbg(dd, fmt, ...) \
dev_dbg(&(dd)->pcidev->dev, "%s: " fmt, \
rvt_get_ibdev_name(&(dd)->verbs_dev.rdi), ##__VA_ARGS__)
#define hfi1_dev_porterr(dd, port, fmt, ...) \
dev_err(&(dd)->pcidev->dev, "%s: port %u: " fmt, \
rvt_get_ibdev_name(&(dd)->verbs_dev.rdi), (port), ##__VA_ARGS__)
/*
* this is used for formatting hw error messages...
*/
struct hfi1_hwerror_msgs {
u64 mask;
const char *msg;
size_t sz;
};
/* in intr.c... */
void hfi1_format_hwerrors(u64 hwerrs,
const struct hfi1_hwerror_msgs *hwerrmsgs,
size_t nhwerrmsgs, char *msg, size_t lmsg);
#define USER_OPCODE_CHECK_VAL 0xC0
#define USER_OPCODE_CHECK_MASK 0xC0
#define OPCODE_CHECK_VAL_DISABLED 0x0
#define OPCODE_CHECK_MASK_DISABLED 0x0
static inline void hfi1_reset_cpu_counters(struct hfi1_devdata *dd)
{
struct hfi1_pportdata *ppd;
int i;
dd->z_int_counter = get_all_cpu_total(dd->int_counter);
dd->z_rcv_limit = get_all_cpu_total(dd->rcv_limit);
dd->z_send_schedule = get_all_cpu_total(dd->send_schedule);
ppd = (struct hfi1_pportdata *)(dd + 1);
for (i = 0; i < dd->num_pports; i++, ppd++) {
ppd->ibport_data.rvp.z_rc_acks =
get_all_cpu_total(ppd->ibport_data.rvp.rc_acks);
ppd->ibport_data.rvp.z_rc_qacks =
get_all_cpu_total(ppd->ibport_data.rvp.rc_qacks);
}
}
/* Control LED state */
static inline void setextled(struct hfi1_devdata *dd, u32 on)
{
if (on)
write_csr(dd, DCC_CFG_LED_CNTRL, 0x1F);
else
write_csr(dd, DCC_CFG_LED_CNTRL, 0x10);
}
/* return the i2c resource given the target */
static inline u32 i2c_target(u32 target)
{
return target ? CR_I2C2 : CR_I2C1;
}
/* return the i2c chain chip resource that this HFI uses for QSFP */
static inline u32 qsfp_resource(struct hfi1_devdata *dd)
{
return i2c_target(dd->hfi1_id);
}
/* Is this device integrated or discrete? */
static inline bool is_integrated(struct hfi1_devdata *dd)
{
return dd->pcidev->device == PCI_DEVICE_ID_INTEL1;
}
int hfi1_tempsense_rd(struct hfi1_devdata *dd, struct hfi1_temp *temp);
#define DD_DEV_ENTRY(dd) __string(dev, dev_name(&(dd)->pcidev->dev))
#define DD_DEV_ASSIGN(dd) __assign_str(dev, dev_name(&(dd)->pcidev->dev))
static inline void hfi1_update_ah_attr(struct ib_device *ibdev,
struct rdma_ah_attr *attr)
{
struct hfi1_pportdata *ppd;
struct hfi1_ibport *ibp;
u32 dlid = rdma_ah_get_dlid(attr);
/*
* Kernel clients may not have setup GRH information
* Set that here.
*/
ibp = to_iport(ibdev, rdma_ah_get_port_num(attr));
ppd = ppd_from_ibp(ibp);
if ((((dlid >= be16_to_cpu(IB_MULTICAST_LID_BASE)) ||
(ppd->lid >= be16_to_cpu(IB_MULTICAST_LID_BASE))) &&
(dlid != be32_to_cpu(OPA_LID_PERMISSIVE)) &&
(dlid != be16_to_cpu(IB_LID_PERMISSIVE)) &&
(!(rdma_ah_get_ah_flags(attr) & IB_AH_GRH))) ||
(rdma_ah_get_make_grd(attr))) {
rdma_ah_set_ah_flags(attr, IB_AH_GRH);
rdma_ah_set_interface_id(attr, OPA_MAKE_ID(dlid));
rdma_ah_set_subnet_prefix(attr, ibp->rvp.gid_prefix);
}
}
/*
* hfi1_check_mcast- Check if the given lid is
* in the OPA multicast range.
*
* The LID might either reside in ah.dlid or might be
* in the GRH of the address handle as DGID if extended
* addresses are in use.
*/
static inline bool hfi1_check_mcast(u32 lid)
{
return ((lid >= opa_get_mcast_base(OPA_MCAST_NR)) &&
(lid != be32_to_cpu(OPA_LID_PERMISSIVE)));
}
#define opa_get_lid(lid, format) \
__opa_get_lid(lid, OPA_PORT_PACKET_FORMAT_##format)
/* Convert a lid to a specific lid space */
static inline u32 __opa_get_lid(u32 lid, u8 format)
{
bool is_mcast = hfi1_check_mcast(lid);
switch (format) {
case OPA_PORT_PACKET_FORMAT_8B:
case OPA_PORT_PACKET_FORMAT_10B:
if (is_mcast)
return (lid - opa_get_mcast_base(OPA_MCAST_NR) +
0xF0000);
return lid & 0xFFFFF;
case OPA_PORT_PACKET_FORMAT_16B:
if (is_mcast)
return (lid - opa_get_mcast_base(OPA_MCAST_NR) +
0xF00000);
return lid & 0xFFFFFF;
case OPA_PORT_PACKET_FORMAT_9B:
if (is_mcast)
return (lid -
opa_get_mcast_base(OPA_MCAST_NR) +
be16_to_cpu(IB_MULTICAST_LID_BASE));
else
return lid & 0xFFFF;
default:
return lid;
}
}
/* Return true if the given lid is the OPA 16B multicast range */
static inline bool hfi1_is_16B_mcast(u32 lid)
{
return ((lid >=
opa_get_lid(opa_get_mcast_base(OPA_MCAST_NR), 16B)) &&
(lid != opa_get_lid(be32_to_cpu(OPA_LID_PERMISSIVE), 16B)));
}
static inline void hfi1_make_opa_lid(struct rdma_ah_attr *attr)
{
const struct ib_global_route *grh = rdma_ah_read_grh(attr);
u32 dlid = rdma_ah_get_dlid(attr);
/* Modify ah_attr.dlid to be in the 32 bit LID space.
* This is how the address will be laid out:
* Assuming MCAST_NR to be 4,
* 32 bit permissive LID = 0xFFFFFFFF
* Multicast LID range = 0xFFFFFFFE to 0xF0000000
* Unicast LID range = 0xEFFFFFFF to 1
* Invalid LID = 0
*/
if (ib_is_opa_gid(&grh->dgid))
dlid = opa_get_lid_from_gid(&grh->dgid);
else if ((dlid >= be16_to_cpu(IB_MULTICAST_LID_BASE)) &&
(dlid != be16_to_cpu(IB_LID_PERMISSIVE)) &&
(dlid != be32_to_cpu(OPA_LID_PERMISSIVE)))
dlid = dlid - be16_to_cpu(IB_MULTICAST_LID_BASE) +
opa_get_mcast_base(OPA_MCAST_NR);
else if (dlid == be16_to_cpu(IB_LID_PERMISSIVE))
dlid = be32_to_cpu(OPA_LID_PERMISSIVE);
rdma_ah_set_dlid(attr, dlid);
}
static inline u8 hfi1_get_packet_type(u32 lid)
{
/* 9B if lid > 0xF0000000 */
if (lid >= opa_get_mcast_base(OPA_MCAST_NR))
return HFI1_PKT_TYPE_9B;
/* 16B if lid > 0xC000 */
if (lid >= opa_get_lid(opa_get_mcast_base(OPA_MCAST_NR), 9B))
return HFI1_PKT_TYPE_16B;
return HFI1_PKT_TYPE_9B;
}
static inline bool hfi1_get_hdr_type(u32 lid, struct rdma_ah_attr *attr)
{
/*
* If there was an incoming 16B packet with permissive
* LIDs, OPA GIDs would have been programmed when those
* packets were received. A 16B packet will have to
* be sent in response to that packet. Return a 16B
* header type if that's the case.
*/
if (rdma_ah_get_dlid(attr) == be32_to_cpu(OPA_LID_PERMISSIVE))
return (ib_is_opa_gid(&rdma_ah_read_grh(attr)->dgid)) ?
HFI1_PKT_TYPE_16B : HFI1_PKT_TYPE_9B;
/*
* Return a 16B header type if either the the destination
* or source lid is extended.
*/
if (hfi1_get_packet_type(rdma_ah_get_dlid(attr)) == HFI1_PKT_TYPE_16B)
return HFI1_PKT_TYPE_16B;
return hfi1_get_packet_type(lid);
}
static inline void hfi1_make_ext_grh(struct hfi1_packet *packet,
struct ib_grh *grh, u32 slid,
u32 dlid)
{
struct hfi1_ibport *ibp = &packet->rcd->ppd->ibport_data;
struct hfi1_pportdata *ppd = ppd_from_ibp(ibp);
if (!ibp)
return;
grh->hop_limit = 1;
grh->sgid.global.subnet_prefix = ibp->rvp.gid_prefix;
if (slid == opa_get_lid(be32_to_cpu(OPA_LID_PERMISSIVE), 16B))
grh->sgid.global.interface_id =
OPA_MAKE_ID(be32_to_cpu(OPA_LID_PERMISSIVE));
else
grh->sgid.global.interface_id = OPA_MAKE_ID(slid);
/*
* Upper layers (like mad) may compare the dgid in the
* wc that is obtained here with the sgid_index in
* the wr. Since sgid_index in wr is always 0 for
* extended lids, set the dgid here to the default
* IB gid.
*/
grh->dgid.global.subnet_prefix = ibp->rvp.gid_prefix;
grh->dgid.global.interface_id =
cpu_to_be64(ppd->guids[HFI1_PORT_GUID_INDEX]);
}
static inline int hfi1_get_16b_padding(u32 hdr_size, u32 payload)
{
return -(hdr_size + payload + (SIZE_OF_CRC << 2) +
SIZE_OF_LT) & 0x7;
}
static inline void hfi1_make_ib_hdr(struct ib_header *hdr,
u16 lrh0, u16 len,
u16 dlid, u16 slid)
{
hdr->lrh[0] = cpu_to_be16(lrh0);
hdr->lrh[1] = cpu_to_be16(dlid);
hdr->lrh[2] = cpu_to_be16(len);
hdr->lrh[3] = cpu_to_be16(slid);
}
static inline void hfi1_make_16b_hdr(struct hfi1_16b_header *hdr,
u32 slid, u32 dlid,
u16 len, u16 pkey,
bool becn, bool fecn, u8 l4,
u8 sc)
{
u32 lrh0 = 0;
u32 lrh1 = 0x40000000;
u32 lrh2 = 0;
u32 lrh3 = 0;
lrh0 = (lrh0 & ~OPA_16B_BECN_MASK) | (becn << OPA_16B_BECN_SHIFT);
lrh0 = (lrh0 & ~OPA_16B_LEN_MASK) | (len << OPA_16B_LEN_SHIFT);
lrh0 = (lrh0 & ~OPA_16B_LID_MASK) | (slid & OPA_16B_LID_MASK);
lrh1 = (lrh1 & ~OPA_16B_FECN_MASK) | (fecn << OPA_16B_FECN_SHIFT);
lrh1 = (lrh1 & ~OPA_16B_SC_MASK) | (sc << OPA_16B_SC_SHIFT);
lrh1 = (lrh1 & ~OPA_16B_LID_MASK) | (dlid & OPA_16B_LID_MASK);
lrh2 = (lrh2 & ~OPA_16B_SLID_MASK) |
((slid >> OPA_16B_SLID_SHIFT) << OPA_16B_SLID_HIGH_SHIFT);
lrh2 = (lrh2 & ~OPA_16B_DLID_MASK) |
((dlid >> OPA_16B_DLID_SHIFT) << OPA_16B_DLID_HIGH_SHIFT);
lrh2 = (lrh2 & ~OPA_16B_PKEY_MASK) | ((u32)pkey << OPA_16B_PKEY_SHIFT);
lrh2 = (lrh2 & ~OPA_16B_L4_MASK) | l4;
hdr->lrh[0] = lrh0;
hdr->lrh[1] = lrh1;
hdr->lrh[2] = lrh2;
hdr->lrh[3] = lrh3;
}
#endif /* _HFI1_KERNEL_H */