linux/drivers/media/i2c/tvp5150.c

1228 lines
32 KiB
C
Raw Normal View History

/*
* tvp5150 - Texas Instruments TVP5150A/AM1 video decoder driver
*
* Copyright (c) 2005,2006 Mauro Carvalho Chehab (mchehab@infradead.org)
* This code is placed under the terms of the GNU General Public License v2
*/
#include <linux/i2c.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 08:04:11 +00:00
#include <linux/slab.h>
#include <linux/videodev2.h>
#include <linux/delay.h>
#include <linux/module.h>
#include <media/v4l2-device.h>
#include <media/tvp5150.h>
#include <media/v4l2-ctrls.h>
#include "tvp5150_reg.h"
#define TVP5150_H_MAX 720U
#define TVP5150_V_MAX_525_60 480U
#define TVP5150_V_MAX_OTHERS 576U
#define TVP5150_MAX_CROP_LEFT 511
#define TVP5150_MAX_CROP_TOP 127
#define TVP5150_CROP_SHIFT 2
MODULE_DESCRIPTION("Texas Instruments TVP5150A video decoder driver");
MODULE_AUTHOR("Mauro Carvalho Chehab");
MODULE_LICENSE("GPL");
static int debug;
module_param(debug, int, 0644);
MODULE_PARM_DESC(debug, "Debug level (0-2)");
struct tvp5150 {
struct v4l2_subdev sd;
struct v4l2_ctrl_handler hdl;
struct v4l2_rect rect;
v4l2_std_id norm; /* Current set standard */
u32 input;
u32 output;
int enable;
};
static inline struct tvp5150 *to_tvp5150(struct v4l2_subdev *sd)
{
return container_of(sd, struct tvp5150, sd);
}
static inline struct v4l2_subdev *to_sd(struct v4l2_ctrl *ctrl)
{
return &container_of(ctrl->handler, struct tvp5150, hdl)->sd;
}
static int tvp5150_read(struct v4l2_subdev *sd, unsigned char addr)
{
struct i2c_client *c = v4l2_get_subdevdata(sd);
unsigned char buffer[1];
int rc;
struct i2c_msg msg[] = {
{ .addr = c->addr, .flags = 0,
.buf = &addr, .len = 1 },
{ .addr = c->addr, .flags = I2C_M_RD,
.buf = buffer, .len = 1 }
};
rc = i2c_transfer(c->adapter, msg, 2);
if (rc < 0 || rc != 2) {
v4l2_err(sd, "i2c i/o error: rc == %d (should be 2)\n", rc);
return rc < 0 ? rc : -EIO;
[media] tvp5150: fix kernel crash if chip is unavailable tvp5150 driver probe function doesn't check if the chip is present. Thus the driver can be loaded without having a device. This is dangerous and can cause kernel crash like this: Kernel BUG at c03c0964 [verbose debug info unavailable] Internal error: Oops - BUG: 0 [#1] PREEMPT ARM Modules linked in: CPU: 0 Tainted: G W (3.4.0-cm-t3730+ #2) PC is at media_entity_create_link+0xe4/0xf4 LR is at isp_register_entities+0x228/0x2f4 pc : [<c03c0964>] lr : [<c03f3b30>] psr: 60000013 sp : cf02de50 ip : 00000000 fp : c079405c r10: 00000000 r9 : 00000000 r8 : cf33c800 r7 : c0794834 r6 : 00000000 r5 : 00000000 r4 : cf365b48 r3 : 00000000 r2 : cf365b48 r1 : 00000000 r0 : cf33c800 Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment kernel Control: 10c5387d Table: 80004019 DAC: 00000015 Process swapper (pid: 1, stack limit = 0xcf02c2f0) Stack: (0xcf02de50 to 0xcf02e000) de40: cf360000 cf366f28 cf366218 c0794834 de60: cf365b48 00000000 cf33c800 c03f3b30 00000000 00000000 cf360890 cf3668a0 de80: 00000003 cf360000 c0785a58 00000000 cf360528 00000000 00000000 00003fff dea0: cf360500 c03f4cdc c06cc1f4 cf360000 c0785a58 c0d27808 c07d55ec c0785a58 dec0: c031f0e0 c07d55ec c0776900 000000bb 00000000 c032040c c03203f4 c031ef0c dee0: c0785a58 c07d55ec c0785a8c c031f0e0 c075e670 c031f0c8 cf02deb8 c0785a58 df00: c07d55ec c031f174 c07d55ec 00000000 cf02df18 c031d7a0 cf01d4a8 cf068b10 df20: 00000000 c07d55ec c07c74d0 cf34bcc0 00000000 c031ded8 c0672340 c054cd38 df40: 00000000 c07e68c0 c07d55ec 00000000 00000000 c075e670 c0776900 000000bb df60: 00000000 c031f770 c07e68c0 00000007 c07e68c0 00000000 c075e670 c0008790 df80: 000000bb 00000006 00000006 c066e650 cf02dfa4 c07689b8 c07689b8 00000007 dfa0: c07e68c0 c073f2e8 c07689c0 000000bb 00000000 c073f2bc 00000006 00000006 dfc0: c073f2e8 00000000 c077649c c077649c c00150cc 00000013 00000000 00000000 dfe0: 00000000 c073f3cc cf02dfe8 00000000 c073f368 c00150cc 00000000 00000000 [<c03c0964>] (media_entity_create_link+0xe4/0xf4) from [<c03f3b30>] (isp_register_entities+0x228/0x2f4) [<c03f3b30>] (isp_register_entities+0x228/0x2f4) from [<c03f4cdc>] (isp_probe+0x7ac/0x9b8) [<c03f4cdc>] (isp_probe+0x7ac/0x9b8) from [<c032040c>] (platform_drv_probe+0x18/0x1c) [<c032040c>] (platform_drv_probe+0x18/0x1c) from [<c031ef0c>] (really_probe+0x64/0x1d8) [<c031ef0c>] (really_probe+0x64/0x1d8) from [<c031f0c8>] (driver_probe_device+0x48/0x60) [<c031f0c8>] (driver_probe_device+0x48/0x60) from [<c031f174>] (__driver_attach+0x94/0x98) [<c031f174>] (__driver_attach+0x94/0x98) from [<c031d7a0>] (bus_for_each_dev+0x54/0x80) [<c031d7a0>] (bus_for_each_dev+0x54/0x80) from [<c031ded8>] (bus_add_driver+0xac/0x2a8) [<c031ded8>] (bus_add_driver+0xac/0x2a8) from [<c031f770>] (driver_register+0x78/0x180) [<c031f770>] (driver_register+0x78/0x180) from [<c0008790>] (do_one_initcall+0x34/0x184) [<c0008790>] (do_one_initcall+0x34/0x184) from [<c073f2bc>] (do_basic_setup+0x9c/0xc8) [<c073f2bc>] (do_basic_setup+0x9c/0xc8) from [<c073f3cc>] (kernel_init+0x64/0xec) [<c073f3cc>] (kernel_init+0x64/0xec) from [<c00150cc>] (kernel_thread_exit+0x0/0x8) Code: e1c812b6 e8bd87f0 e7f001f2 eafffffe (e7f001f2) ---[ end trace 3ed3c618b26ff3e8 ]--- Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b This patch fixes the tvp5150_read() function to return an error in case the I2C transaction fails. tvp5150_probe() and other relevant driver callbacks changed to check the status of the I2C read operations. In case of a read error throw an error message with v4l2_err() instead of v4l2_dbg(). [mchehab@redhat.com: Fix a small typo breaking compilation] Signed-off-by: Dmitry Lifshitz <lifshitz@compulab.co.il> Signed-off-by: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-06-13 10:49:30 +00:00
}
v4l2_dbg(2, debug, sd, "tvp5150: read 0x%02x = 0x%02x\n", addr, buffer[0]);
return (buffer[0]);
}
static inline void tvp5150_write(struct v4l2_subdev *sd, unsigned char addr,
unsigned char value)
{
struct i2c_client *c = v4l2_get_subdevdata(sd);
unsigned char buffer[2];
int rc;
buffer[0] = addr;
buffer[1] = value;
v4l2_dbg(2, debug, sd, "tvp5150: writing 0x%02x 0x%02x\n", buffer[0], buffer[1]);
if (2 != (rc = i2c_master_send(c, buffer, 2)))
v4l2_dbg(0, debug, sd, "i2c i/o error: rc == %d (should be 2)\n", rc);
}
static void dump_reg_range(struct v4l2_subdev *sd, char *s, u8 init,
const u8 end, int max_line)
{
int i = 0;
while (init != (u8)(end + 1)) {
if ((i % max_line) == 0) {
if (i > 0)
printk("\n");
printk("tvp5150: %s reg 0x%02x = ", s, init);
}
printk("%02x ", tvp5150_read(sd, init));
init++;
i++;
}
printk("\n");
}
static int tvp5150_log_status(struct v4l2_subdev *sd)
{
printk("tvp5150: Video input source selection #1 = 0x%02x\n",
tvp5150_read(sd, TVP5150_VD_IN_SRC_SEL_1));
printk("tvp5150: Analog channel controls = 0x%02x\n",
tvp5150_read(sd, TVP5150_ANAL_CHL_CTL));
printk("tvp5150: Operation mode controls = 0x%02x\n",
tvp5150_read(sd, TVP5150_OP_MODE_CTL));
printk("tvp5150: Miscellaneous controls = 0x%02x\n",
tvp5150_read(sd, TVP5150_MISC_CTL));
printk("tvp5150: Autoswitch mask= 0x%02x\n",
tvp5150_read(sd, TVP5150_AUTOSW_MSK));
printk("tvp5150: Color killer threshold control = 0x%02x\n",
tvp5150_read(sd, TVP5150_COLOR_KIL_THSH_CTL));
printk("tvp5150: Luminance processing controls #1 #2 and #3 = %02x %02x %02x\n",
tvp5150_read(sd, TVP5150_LUMA_PROC_CTL_1),
tvp5150_read(sd, TVP5150_LUMA_PROC_CTL_2),
tvp5150_read(sd, TVP5150_LUMA_PROC_CTL_3));
printk("tvp5150: Brightness control = 0x%02x\n",
tvp5150_read(sd, TVP5150_BRIGHT_CTL));
printk("tvp5150: Color saturation control = 0x%02x\n",
tvp5150_read(sd, TVP5150_SATURATION_CTL));
printk("tvp5150: Hue control = 0x%02x\n",
tvp5150_read(sd, TVP5150_HUE_CTL));
printk("tvp5150: Contrast control = 0x%02x\n",
tvp5150_read(sd, TVP5150_CONTRAST_CTL));
printk("tvp5150: Outputs and data rates select = 0x%02x\n",
tvp5150_read(sd, TVP5150_DATA_RATE_SEL));
printk("tvp5150: Configuration shared pins = 0x%02x\n",
tvp5150_read(sd, TVP5150_CONF_SHARED_PIN));
printk("tvp5150: Active video cropping start = 0x%02x%02x\n",
tvp5150_read(sd, TVP5150_ACT_VD_CROP_ST_MSB),
tvp5150_read(sd, TVP5150_ACT_VD_CROP_ST_LSB));
printk("tvp5150: Active video cropping stop = 0x%02x%02x\n",
tvp5150_read(sd, TVP5150_ACT_VD_CROP_STP_MSB),
tvp5150_read(sd, TVP5150_ACT_VD_CROP_STP_LSB));
printk("tvp5150: Genlock/RTC = 0x%02x\n",
tvp5150_read(sd, TVP5150_GENLOCK));
printk("tvp5150: Horizontal sync start = 0x%02x\n",
tvp5150_read(sd, TVP5150_HORIZ_SYNC_START));
printk("tvp5150: Vertical blanking start = 0x%02x\n",
tvp5150_read(sd, TVP5150_VERT_BLANKING_START));
printk("tvp5150: Vertical blanking stop = 0x%02x\n",
tvp5150_read(sd, TVP5150_VERT_BLANKING_STOP));
printk("tvp5150: Chrominance processing control #1 and #2 = %02x %02x\n",
tvp5150_read(sd, TVP5150_CHROMA_PROC_CTL_1),
tvp5150_read(sd, TVP5150_CHROMA_PROC_CTL_2));
printk("tvp5150: Interrupt reset register B = 0x%02x\n",
tvp5150_read(sd, TVP5150_INT_RESET_REG_B));
printk("tvp5150: Interrupt enable register B = 0x%02x\n",
tvp5150_read(sd, TVP5150_INT_ENABLE_REG_B));
printk("tvp5150: Interrupt configuration register B = 0x%02x\n",
tvp5150_read(sd, TVP5150_INTT_CONFIG_REG_B));
printk("tvp5150: Video standard = 0x%02x\n",
tvp5150_read(sd, TVP5150_VIDEO_STD));
printk("tvp5150: Chroma gain factor: Cb=0x%02x Cr=0x%02x\n",
tvp5150_read(sd, TVP5150_CB_GAIN_FACT),
tvp5150_read(sd, TVP5150_CR_GAIN_FACTOR));
printk("tvp5150: Macrovision on counter = 0x%02x\n",
tvp5150_read(sd, TVP5150_MACROVISION_ON_CTR));
printk("tvp5150: Macrovision off counter = 0x%02x\n",
tvp5150_read(sd, TVP5150_MACROVISION_OFF_CTR));
printk("tvp5150: ITU-R BT.656.%d timing(TVP5150AM1 only)\n",
(tvp5150_read(sd, TVP5150_REV_SELECT) & 1) ? 3 : 4);
printk("tvp5150: Device ID = %02x%02x\n",
tvp5150_read(sd, TVP5150_MSB_DEV_ID),
tvp5150_read(sd, TVP5150_LSB_DEV_ID));
printk("tvp5150: ROM version = (hex) %02x.%02x\n",
tvp5150_read(sd, TVP5150_ROM_MAJOR_VER),
tvp5150_read(sd, TVP5150_ROM_MINOR_VER));
printk("tvp5150: Vertical line count = 0x%02x%02x\n",
tvp5150_read(sd, TVP5150_VERT_LN_COUNT_MSB),
tvp5150_read(sd, TVP5150_VERT_LN_COUNT_LSB));
printk("tvp5150: Interrupt status register B = 0x%02x\n",
tvp5150_read(sd, TVP5150_INT_STATUS_REG_B));
printk("tvp5150: Interrupt active register B = 0x%02x\n",
tvp5150_read(sd, TVP5150_INT_ACTIVE_REG_B));
printk("tvp5150: Status regs #1 to #5 = %02x %02x %02x %02x %02x\n",
tvp5150_read(sd, TVP5150_STATUS_REG_1),
tvp5150_read(sd, TVP5150_STATUS_REG_2),
tvp5150_read(sd, TVP5150_STATUS_REG_3),
tvp5150_read(sd, TVP5150_STATUS_REG_4),
tvp5150_read(sd, TVP5150_STATUS_REG_5));
dump_reg_range(sd, "Teletext filter 1", TVP5150_TELETEXT_FIL1_INI,
TVP5150_TELETEXT_FIL1_END, 8);
dump_reg_range(sd, "Teletext filter 2", TVP5150_TELETEXT_FIL2_INI,
TVP5150_TELETEXT_FIL2_END, 8);
printk("tvp5150: Teletext filter enable = 0x%02x\n",
tvp5150_read(sd, TVP5150_TELETEXT_FIL_ENA));
printk("tvp5150: Interrupt status register A = 0x%02x\n",
tvp5150_read(sd, TVP5150_INT_STATUS_REG_A));
printk("tvp5150: Interrupt enable register A = 0x%02x\n",
tvp5150_read(sd, TVP5150_INT_ENABLE_REG_A));
printk("tvp5150: Interrupt configuration = 0x%02x\n",
tvp5150_read(sd, TVP5150_INT_CONF));
printk("tvp5150: VDP status register = 0x%02x\n",
tvp5150_read(sd, TVP5150_VDP_STATUS_REG));
printk("tvp5150: FIFO word count = 0x%02x\n",
tvp5150_read(sd, TVP5150_FIFO_WORD_COUNT));
printk("tvp5150: FIFO interrupt threshold = 0x%02x\n",
tvp5150_read(sd, TVP5150_FIFO_INT_THRESHOLD));
printk("tvp5150: FIFO reset = 0x%02x\n",
tvp5150_read(sd, TVP5150_FIFO_RESET));
printk("tvp5150: Line number interrupt = 0x%02x\n",
tvp5150_read(sd, TVP5150_LINE_NUMBER_INT));
printk("tvp5150: Pixel alignment register = 0x%02x%02x\n",
tvp5150_read(sd, TVP5150_PIX_ALIGN_REG_HIGH),
tvp5150_read(sd, TVP5150_PIX_ALIGN_REG_LOW));
printk("tvp5150: FIFO output control = 0x%02x\n",
tvp5150_read(sd, TVP5150_FIFO_OUT_CTRL));
printk("tvp5150: Full field enable = 0x%02x\n",
tvp5150_read(sd, TVP5150_FULL_FIELD_ENA));
printk("tvp5150: Full field mode register = 0x%02x\n",
tvp5150_read(sd, TVP5150_FULL_FIELD_MODE_REG));
dump_reg_range(sd, "CC data", TVP5150_CC_DATA_INI,
TVP5150_CC_DATA_END, 8);
dump_reg_range(sd, "WSS data", TVP5150_WSS_DATA_INI,
TVP5150_WSS_DATA_END, 8);
dump_reg_range(sd, "VPS data", TVP5150_VPS_DATA_INI,
TVP5150_VPS_DATA_END, 8);
dump_reg_range(sd, "VITC data", TVP5150_VITC_DATA_INI,
TVP5150_VITC_DATA_END, 10);
dump_reg_range(sd, "Line mode", TVP5150_LINE_MODE_INI,
TVP5150_LINE_MODE_END, 8);
return 0;
}
/****************************************************************************
Basic functions
****************************************************************************/
static inline void tvp5150_selmux(struct v4l2_subdev *sd)
{
[media] tvp5150: COMPOSITE0 input should not force-enable TV mode When digitizing composite video from a analog videotape source using the TVP5150's first composite input channel, the captured stream exhibits tearing and synchronization problems[1]. It turns out that commit c0477ad9feca01bd8eff95d7482c33753d05c700 caused "TV mode" (as opposed to "VCR mode" or "auto-detect") to be forcibly enabled for both composite inputs. According to the chip documentation[2], "TV mode" disables a "chrominance trap" input filter, which appears to be necessary for high-quality video capture from an analog videotape source. [ Commit c7c0b34c27bbf0671807e902fbfea6270c8f138d subsequently restricted the problem to the first composite input, apparently inadvertently. ] Since any type of composite signal source can be connected to the TVP5150's first composite input, unconditionally forcing "TV mode" isn't correct. There doesn't appear to be a good way for applications to tell the driver what is connected. Fortunately, the TVP5150 has an operating mode auto-detection feature, which, when enabled, should cause the TVP5150 to auto-detect whether it should use "VCR mode" or "TV mode". Enabling operating mode auto-detection improved video capture quality significantly[3]. Therefore, fix this bug by using operating mode auto-detection. (Also, while here, fix a CodingStyle issue.) For those users who may find this patch via a mailing list archive but who are not able to upgrade to a kernel with a fixed driver: the TVP5150's S-Video and second composite input sources have auto-detection enabled, so you may wish to try using those -- if available on your device -- until this fix makes it a downstream distribution near you. 1. Pre-patch tvtime snapshot using a Pinnacle PCTV HD Pro as the capture device and a Sony EV-S2000 as a video source: http://www.booyaka.com/~paul/tvp5150/1a.png 2. Section 3.21.3, "Operation Mode Control Register", _TVP5150AM1 Ultralow-Power NTSC/PAL/SECAM Video Decoder (Rev. D)_ [SLES209D], downloaded 8 October 2010, available via http://focus.ti.com/lit/ds/symlink/tvp5150am1.pdf 3. Post-patch tvtime snapshot (same signal chain as #1, above): http://www.booyaka.com/~paul/tvp5150/1b.png Signed-off-by: Paul Walmsley <paul@booyaka.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-10-09 04:31:40 +00:00
int opmode = 0;
struct tvp5150 *decoder = to_tvp5150(sd);
int input = 0;
int val;
if ((decoder->output & TVP5150_BLACK_SCREEN) || !decoder->enable)
input = 8;
switch (decoder->input) {
case TVP5150_COMPOSITE1:
input |= 2;
/* fall through */
case TVP5150_COMPOSITE0:
break;
case TVP5150_SVIDEO:
default:
input |= 1;
break;
}
v4l2_dbg(1, debug, sd, "Selecting video route: route input=%i, output=%i "
"=> tvp5150 input=%i, opmode=%i\n",
decoder->input, decoder->output,
input, opmode);
tvp5150_write(sd, TVP5150_OP_MODE_CTL, opmode);
tvp5150_write(sd, TVP5150_VD_IN_SRC_SEL_1, input);
/* Svideo should enable YCrCb output and disable GPCL output
* For Composite and TV, it should be the reverse
*/
val = tvp5150_read(sd, TVP5150_MISC_CTL);
[media] tvp5150: fix kernel crash if chip is unavailable tvp5150 driver probe function doesn't check if the chip is present. Thus the driver can be loaded without having a device. This is dangerous and can cause kernel crash like this: Kernel BUG at c03c0964 [verbose debug info unavailable] Internal error: Oops - BUG: 0 [#1] PREEMPT ARM Modules linked in: CPU: 0 Tainted: G W (3.4.0-cm-t3730+ #2) PC is at media_entity_create_link+0xe4/0xf4 LR is at isp_register_entities+0x228/0x2f4 pc : [<c03c0964>] lr : [<c03f3b30>] psr: 60000013 sp : cf02de50 ip : 00000000 fp : c079405c r10: 00000000 r9 : 00000000 r8 : cf33c800 r7 : c0794834 r6 : 00000000 r5 : 00000000 r4 : cf365b48 r3 : 00000000 r2 : cf365b48 r1 : 00000000 r0 : cf33c800 Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment kernel Control: 10c5387d Table: 80004019 DAC: 00000015 Process swapper (pid: 1, stack limit = 0xcf02c2f0) Stack: (0xcf02de50 to 0xcf02e000) de40: cf360000 cf366f28 cf366218 c0794834 de60: cf365b48 00000000 cf33c800 c03f3b30 00000000 00000000 cf360890 cf3668a0 de80: 00000003 cf360000 c0785a58 00000000 cf360528 00000000 00000000 00003fff dea0: cf360500 c03f4cdc c06cc1f4 cf360000 c0785a58 c0d27808 c07d55ec c0785a58 dec0: c031f0e0 c07d55ec c0776900 000000bb 00000000 c032040c c03203f4 c031ef0c dee0: c0785a58 c07d55ec c0785a8c c031f0e0 c075e670 c031f0c8 cf02deb8 c0785a58 df00: c07d55ec c031f174 c07d55ec 00000000 cf02df18 c031d7a0 cf01d4a8 cf068b10 df20: 00000000 c07d55ec c07c74d0 cf34bcc0 00000000 c031ded8 c0672340 c054cd38 df40: 00000000 c07e68c0 c07d55ec 00000000 00000000 c075e670 c0776900 000000bb df60: 00000000 c031f770 c07e68c0 00000007 c07e68c0 00000000 c075e670 c0008790 df80: 000000bb 00000006 00000006 c066e650 cf02dfa4 c07689b8 c07689b8 00000007 dfa0: c07e68c0 c073f2e8 c07689c0 000000bb 00000000 c073f2bc 00000006 00000006 dfc0: c073f2e8 00000000 c077649c c077649c c00150cc 00000013 00000000 00000000 dfe0: 00000000 c073f3cc cf02dfe8 00000000 c073f368 c00150cc 00000000 00000000 [<c03c0964>] (media_entity_create_link+0xe4/0xf4) from [<c03f3b30>] (isp_register_entities+0x228/0x2f4) [<c03f3b30>] (isp_register_entities+0x228/0x2f4) from [<c03f4cdc>] (isp_probe+0x7ac/0x9b8) [<c03f4cdc>] (isp_probe+0x7ac/0x9b8) from [<c032040c>] (platform_drv_probe+0x18/0x1c) [<c032040c>] (platform_drv_probe+0x18/0x1c) from [<c031ef0c>] (really_probe+0x64/0x1d8) [<c031ef0c>] (really_probe+0x64/0x1d8) from [<c031f0c8>] (driver_probe_device+0x48/0x60) [<c031f0c8>] (driver_probe_device+0x48/0x60) from [<c031f174>] (__driver_attach+0x94/0x98) [<c031f174>] (__driver_attach+0x94/0x98) from [<c031d7a0>] (bus_for_each_dev+0x54/0x80) [<c031d7a0>] (bus_for_each_dev+0x54/0x80) from [<c031ded8>] (bus_add_driver+0xac/0x2a8) [<c031ded8>] (bus_add_driver+0xac/0x2a8) from [<c031f770>] (driver_register+0x78/0x180) [<c031f770>] (driver_register+0x78/0x180) from [<c0008790>] (do_one_initcall+0x34/0x184) [<c0008790>] (do_one_initcall+0x34/0x184) from [<c073f2bc>] (do_basic_setup+0x9c/0xc8) [<c073f2bc>] (do_basic_setup+0x9c/0xc8) from [<c073f3cc>] (kernel_init+0x64/0xec) [<c073f3cc>] (kernel_init+0x64/0xec) from [<c00150cc>] (kernel_thread_exit+0x0/0x8) Code: e1c812b6 e8bd87f0 e7f001f2 eafffffe (e7f001f2) ---[ end trace 3ed3c618b26ff3e8 ]--- Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b This patch fixes the tvp5150_read() function to return an error in case the I2C transaction fails. tvp5150_probe() and other relevant driver callbacks changed to check the status of the I2C read operations. In case of a read error throw an error message with v4l2_err() instead of v4l2_dbg(). [mchehab@redhat.com: Fix a small typo breaking compilation] Signed-off-by: Dmitry Lifshitz <lifshitz@compulab.co.il> Signed-off-by: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-06-13 10:49:30 +00:00
if (val < 0) {
v4l2_err(sd, "%s: failed with error = %d\n", __func__, val);
return;
}
if (decoder->input == TVP5150_SVIDEO)
val = (val & ~0x40) | 0x10;
else
val = (val & ~0x10) | 0x40;
tvp5150_write(sd, TVP5150_MISC_CTL, val);
};
struct i2c_reg_value {
unsigned char reg;
unsigned char value;
};
/* Default values as sugested at TVP5150AM1 datasheet */
static const struct i2c_reg_value tvp5150_init_default[] = {
{ /* 0x00 */
TVP5150_VD_IN_SRC_SEL_1,0x00
},
{ /* 0x01 */
TVP5150_ANAL_CHL_CTL,0x15
},
{ /* 0x02 */
TVP5150_OP_MODE_CTL,0x00
},
{ /* 0x03 */
TVP5150_MISC_CTL,0x01
},
{ /* 0x06 */
TVP5150_COLOR_KIL_THSH_CTL,0x10
},
{ /* 0x07 */
TVP5150_LUMA_PROC_CTL_1,0x60
},
{ /* 0x08 */
TVP5150_LUMA_PROC_CTL_2,0x00
},
{ /* 0x09 */
TVP5150_BRIGHT_CTL,0x80
},
{ /* 0x0a */
TVP5150_SATURATION_CTL,0x80
},
{ /* 0x0b */
TVP5150_HUE_CTL,0x00
},
{ /* 0x0c */
TVP5150_CONTRAST_CTL,0x80
},
{ /* 0x0d */
TVP5150_DATA_RATE_SEL,0x47
},
{ /* 0x0e */
TVP5150_LUMA_PROC_CTL_3,0x00
},
{ /* 0x0f */
TVP5150_CONF_SHARED_PIN,0x08
},
{ /* 0x11 */
TVP5150_ACT_VD_CROP_ST_MSB,0x00
},
{ /* 0x12 */
TVP5150_ACT_VD_CROP_ST_LSB,0x00
},
{ /* 0x13 */
TVP5150_ACT_VD_CROP_STP_MSB,0x00
},
{ /* 0x14 */
TVP5150_ACT_VD_CROP_STP_LSB,0x00
},
{ /* 0x15 */
TVP5150_GENLOCK,0x01
},
{ /* 0x16 */
TVP5150_HORIZ_SYNC_START,0x80
},
{ /* 0x18 */
TVP5150_VERT_BLANKING_START,0x00
},
{ /* 0x19 */
TVP5150_VERT_BLANKING_STOP,0x00
},
{ /* 0x1a */
TVP5150_CHROMA_PROC_CTL_1,0x0c
},
{ /* 0x1b */
TVP5150_CHROMA_PROC_CTL_2,0x14
},
{ /* 0x1c */
TVP5150_INT_RESET_REG_B,0x00
},
{ /* 0x1d */
TVP5150_INT_ENABLE_REG_B,0x00
},
{ /* 0x1e */
TVP5150_INTT_CONFIG_REG_B,0x00
},
{ /* 0x28 */
TVP5150_VIDEO_STD,0x00
},
{ /* 0x2e */
TVP5150_MACROVISION_ON_CTR,0x0f
},
{ /* 0x2f */
TVP5150_MACROVISION_OFF_CTR,0x01
},
{ /* 0xbb */
TVP5150_TELETEXT_FIL_ENA,0x00
},
{ /* 0xc0 */
TVP5150_INT_STATUS_REG_A,0x00
},
{ /* 0xc1 */
TVP5150_INT_ENABLE_REG_A,0x00
},
{ /* 0xc2 */
TVP5150_INT_CONF,0x04
},
{ /* 0xc8 */
TVP5150_FIFO_INT_THRESHOLD,0x80
},
{ /* 0xc9 */
TVP5150_FIFO_RESET,0x00
},
{ /* 0xca */
TVP5150_LINE_NUMBER_INT,0x00
},
{ /* 0xcb */
TVP5150_PIX_ALIGN_REG_LOW,0x4e
},
{ /* 0xcc */
TVP5150_PIX_ALIGN_REG_HIGH,0x00
},
{ /* 0xcd */
TVP5150_FIFO_OUT_CTRL,0x01
},
{ /* 0xcf */
TVP5150_FULL_FIELD_ENA,0x00
},
{ /* 0xd0 */
TVP5150_LINE_MODE_INI,0x00
},
{ /* 0xfc */
TVP5150_FULL_FIELD_MODE_REG,0x7f
},
{ /* end of data */
0xff,0xff
}
};
/* Default values as sugested at TVP5150AM1 datasheet */
static const struct i2c_reg_value tvp5150_init_enable[] = {
{
TVP5150_CONF_SHARED_PIN, 2
},{ /* Automatic offset and AGC enabled */
TVP5150_ANAL_CHL_CTL, 0x15
},{ /* Activate YCrCb output 0x9 or 0xd ? */
TVP5150_MISC_CTL, 0x6f
},{ /* Activates video std autodetection for all standards */
TVP5150_AUTOSW_MSK, 0x0
},{ /* Default format: 0x47. For 4:2:2: 0x40 */
TVP5150_DATA_RATE_SEL, 0x47
},{
TVP5150_CHROMA_PROC_CTL_1, 0x0c
},{
TVP5150_CHROMA_PROC_CTL_2, 0x54
},{ /* Non documented, but initialized on WinTV USB2 */
0x27, 0x20
},{
0xff,0xff
}
};
struct tvp5150_vbi_type {
unsigned int vbi_type;
unsigned int ini_line;
unsigned int end_line;
unsigned int by_field :1;
};
struct i2c_vbi_ram_value {
u16 reg;
struct tvp5150_vbi_type type;
unsigned char values[16];
};
/* This struct have the values for each supported VBI Standard
* by
tvp5150_vbi_types should follow the same order as vbi_ram_default
* value 0 means rom position 0x10, value 1 means rom position 0x30
* and so on. There are 16 possible locations from 0 to 15.
*/
static struct i2c_vbi_ram_value vbi_ram_default[] =
{
/* FIXME: Current api doesn't handle all VBI types, those not
yet supported are placed under #if 0 */
#if 0
{0x010, /* Teletext, SECAM, WST System A */
{V4L2_SLICED_TELETEXT_SECAM,6,23,1},
{ 0xaa, 0xaa, 0xff, 0xff, 0xe7, 0x2e, 0x20, 0x26,
0xe6, 0xb4, 0x0e, 0x00, 0x00, 0x00, 0x10, 0x00 }
},
#endif
{0x030, /* Teletext, PAL, WST System B */
{V4L2_SLICED_TELETEXT_B,6,22,1},
{ 0xaa, 0xaa, 0xff, 0xff, 0x27, 0x2e, 0x20, 0x2b,
0xa6, 0x72, 0x10, 0x00, 0x00, 0x00, 0x10, 0x00 }
},
#if 0
{0x050, /* Teletext, PAL, WST System C */
{V4L2_SLICED_TELETEXT_PAL_C,6,22,1},
{ 0xaa, 0xaa, 0xff, 0xff, 0xe7, 0x2e, 0x20, 0x22,
0xa6, 0x98, 0x0d, 0x00, 0x00, 0x00, 0x10, 0x00 }
},
{0x070, /* Teletext, NTSC, WST System B */
{V4L2_SLICED_TELETEXT_NTSC_B,10,21,1},
{ 0xaa, 0xaa, 0xff, 0xff, 0x27, 0x2e, 0x20, 0x23,
0x69, 0x93, 0x0d, 0x00, 0x00, 0x00, 0x10, 0x00 }
},
{0x090, /* Tetetext, NTSC NABTS System C */
{V4L2_SLICED_TELETEXT_NTSC_C,10,21,1},
{ 0xaa, 0xaa, 0xff, 0xff, 0xe7, 0x2e, 0x20, 0x22,
0x69, 0x93, 0x0d, 0x00, 0x00, 0x00, 0x15, 0x00 }
},
{0x0b0, /* Teletext, NTSC-J, NABTS System D */
{V4L2_SLICED_TELETEXT_NTSC_D,10,21,1},
{ 0xaa, 0xaa, 0xff, 0xff, 0xa7, 0x2e, 0x20, 0x23,
0x69, 0x93, 0x0d, 0x00, 0x00, 0x00, 0x10, 0x00 }
},
{0x0d0, /* Closed Caption, PAL/SECAM */
{V4L2_SLICED_CAPTION_625,22,22,1},
{ 0xaa, 0x2a, 0xff, 0x3f, 0x04, 0x51, 0x6e, 0x02,
0xa6, 0x7b, 0x09, 0x00, 0x00, 0x00, 0x27, 0x00 }
},
#endif
{0x0f0, /* Closed Caption, NTSC */
{V4L2_SLICED_CAPTION_525,21,21,1},
{ 0xaa, 0x2a, 0xff, 0x3f, 0x04, 0x51, 0x6e, 0x02,
0x69, 0x8c, 0x09, 0x00, 0x00, 0x00, 0x27, 0x00 }
},
{0x110, /* Wide Screen Signal, PAL/SECAM */
{V4L2_SLICED_WSS_625,23,23,1},
{ 0x5b, 0x55, 0xc5, 0xff, 0x00, 0x71, 0x6e, 0x42,
0xa6, 0xcd, 0x0f, 0x00, 0x00, 0x00, 0x3a, 0x00 }
},
#if 0
{0x130, /* Wide Screen Signal, NTSC C */
{V4L2_SLICED_WSS_525,20,20,1},
{ 0x38, 0x00, 0x3f, 0x00, 0x00, 0x71, 0x6e, 0x43,
0x69, 0x7c, 0x08, 0x00, 0x00, 0x00, 0x39, 0x00 }
},
{0x150, /* Vertical Interval Timecode (VITC), PAL/SECAM */
{V4l2_SLICED_VITC_625,6,22,0},
{ 0x00, 0x00, 0x00, 0x00, 0x00, 0x8f, 0x6d, 0x49,
0xa6, 0x85, 0x08, 0x00, 0x00, 0x00, 0x4c, 0x00 }
},
{0x170, /* Vertical Interval Timecode (VITC), NTSC */
{V4l2_SLICED_VITC_525,10,20,0},
{ 0x00, 0x00, 0x00, 0x00, 0x00, 0x8f, 0x6d, 0x49,
0x69, 0x94, 0x08, 0x00, 0x00, 0x00, 0x4c, 0x00 }
},
#endif
{0x190, /* Video Program System (VPS), PAL */
{V4L2_SLICED_VPS,16,16,0},
{ 0xaa, 0xaa, 0xff, 0xff, 0xba, 0xce, 0x2b, 0x0d,
0xa6, 0xda, 0x0b, 0x00, 0x00, 0x00, 0x60, 0x00 }
},
/* 0x1d0 User programmable */
/* End of struct */
{ (u16)-1 }
};
static int tvp5150_write_inittab(struct v4l2_subdev *sd,
const struct i2c_reg_value *regs)
{
while (regs->reg != 0xff) {
tvp5150_write(sd, regs->reg, regs->value);
regs++;
}
return 0;
}
static int tvp5150_vdp_init(struct v4l2_subdev *sd,
const struct i2c_vbi_ram_value *regs)
{
unsigned int i;
/* Disable Full Field */
tvp5150_write(sd, TVP5150_FULL_FIELD_ENA, 0);
/* Before programming, Line mode should be at 0xff */
for (i = TVP5150_LINE_MODE_INI; i <= TVP5150_LINE_MODE_END; i++)
tvp5150_write(sd, i, 0xff);
/* Load Ram Table */
while (regs->reg != (u16)-1) {
tvp5150_write(sd, TVP5150_CONF_RAM_ADDR_HIGH, regs->reg >> 8);
tvp5150_write(sd, TVP5150_CONF_RAM_ADDR_LOW, regs->reg);
for (i = 0; i < 16; i++)
tvp5150_write(sd, TVP5150_VDP_CONF_RAM_DATA, regs->values[i]);
regs++;
}
return 0;
}
/* Fills VBI capabilities based on i2c_vbi_ram_value struct */
static int tvp5150_g_sliced_vbi_cap(struct v4l2_subdev *sd,
struct v4l2_sliced_vbi_cap *cap)
{
const struct i2c_vbi_ram_value *regs = vbi_ram_default;
int line;
v4l2_dbg(1, debug, sd, "g_sliced_vbi_cap\n");
memset(cap, 0, sizeof *cap);
while (regs->reg != (u16)-1 ) {
for (line=regs->type.ini_line;line<=regs->type.end_line;line++) {
cap->service_lines[0][line] |= regs->type.vbi_type;
}
cap->service_set |= regs->type.vbi_type;
regs++;
}
return 0;
}
/* Set vbi processing
* type - one of tvp5150_vbi_types
* line - line to gather data
* fields: bit 0 field1, bit 1, field2
* flags (default=0xf0) is a bitmask, were set means:
* bit 7: enable filtering null bytes on CC
* bit 6: send data also to FIFO
* bit 5: don't allow data with errors on FIFO
* bit 4: enable ECC when possible
* pix_align = pix alignment:
* LSB = field1
* MSB = field2
*/
static int tvp5150_set_vbi(struct v4l2_subdev *sd,
const struct i2c_vbi_ram_value *regs,
unsigned int type,u8 flags, int line,
const int fields)
{
struct tvp5150 *decoder = to_tvp5150(sd);
v4l2_std_id std = decoder->norm;
u8 reg;
int pos=0;
if (std == V4L2_STD_ALL) {
v4l2_err(sd, "VBI can't be configured without knowing number of lines\n");
return 0;
} else if (std & V4L2_STD_625_50) {
/* Don't follow NTSC Line number convension */
line += 3;
}
if (line<6||line>27)
return 0;
while (regs->reg != (u16)-1 ) {
if ((type & regs->type.vbi_type) &&
(line>=regs->type.ini_line) &&
(line<=regs->type.end_line)) {
type=regs->type.vbi_type;
break;
}
regs++;
pos++;
}
if (regs->reg == (u16)-1)
return 0;
type=pos | (flags & 0xf0);
reg=((line-6)<<1)+TVP5150_LINE_MODE_INI;
if (fields&1) {
tvp5150_write(sd, reg, type);
}
if (fields&2) {
tvp5150_write(sd, reg+1, type);
}
return type;
}
static int tvp5150_get_vbi(struct v4l2_subdev *sd,
const struct i2c_vbi_ram_value *regs, int line)
{
struct tvp5150 *decoder = to_tvp5150(sd);
v4l2_std_id std = decoder->norm;
u8 reg;
int pos, type = 0;
[media] tvp5150: fix kernel crash if chip is unavailable tvp5150 driver probe function doesn't check if the chip is present. Thus the driver can be loaded without having a device. This is dangerous and can cause kernel crash like this: Kernel BUG at c03c0964 [verbose debug info unavailable] Internal error: Oops - BUG: 0 [#1] PREEMPT ARM Modules linked in: CPU: 0 Tainted: G W (3.4.0-cm-t3730+ #2) PC is at media_entity_create_link+0xe4/0xf4 LR is at isp_register_entities+0x228/0x2f4 pc : [<c03c0964>] lr : [<c03f3b30>] psr: 60000013 sp : cf02de50 ip : 00000000 fp : c079405c r10: 00000000 r9 : 00000000 r8 : cf33c800 r7 : c0794834 r6 : 00000000 r5 : 00000000 r4 : cf365b48 r3 : 00000000 r2 : cf365b48 r1 : 00000000 r0 : cf33c800 Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment kernel Control: 10c5387d Table: 80004019 DAC: 00000015 Process swapper (pid: 1, stack limit = 0xcf02c2f0) Stack: (0xcf02de50 to 0xcf02e000) de40: cf360000 cf366f28 cf366218 c0794834 de60: cf365b48 00000000 cf33c800 c03f3b30 00000000 00000000 cf360890 cf3668a0 de80: 00000003 cf360000 c0785a58 00000000 cf360528 00000000 00000000 00003fff dea0: cf360500 c03f4cdc c06cc1f4 cf360000 c0785a58 c0d27808 c07d55ec c0785a58 dec0: c031f0e0 c07d55ec c0776900 000000bb 00000000 c032040c c03203f4 c031ef0c dee0: c0785a58 c07d55ec c0785a8c c031f0e0 c075e670 c031f0c8 cf02deb8 c0785a58 df00: c07d55ec c031f174 c07d55ec 00000000 cf02df18 c031d7a0 cf01d4a8 cf068b10 df20: 00000000 c07d55ec c07c74d0 cf34bcc0 00000000 c031ded8 c0672340 c054cd38 df40: 00000000 c07e68c0 c07d55ec 00000000 00000000 c075e670 c0776900 000000bb df60: 00000000 c031f770 c07e68c0 00000007 c07e68c0 00000000 c075e670 c0008790 df80: 000000bb 00000006 00000006 c066e650 cf02dfa4 c07689b8 c07689b8 00000007 dfa0: c07e68c0 c073f2e8 c07689c0 000000bb 00000000 c073f2bc 00000006 00000006 dfc0: c073f2e8 00000000 c077649c c077649c c00150cc 00000013 00000000 00000000 dfe0: 00000000 c073f3cc cf02dfe8 00000000 c073f368 c00150cc 00000000 00000000 [<c03c0964>] (media_entity_create_link+0xe4/0xf4) from [<c03f3b30>] (isp_register_entities+0x228/0x2f4) [<c03f3b30>] (isp_register_entities+0x228/0x2f4) from [<c03f4cdc>] (isp_probe+0x7ac/0x9b8) [<c03f4cdc>] (isp_probe+0x7ac/0x9b8) from [<c032040c>] (platform_drv_probe+0x18/0x1c) [<c032040c>] (platform_drv_probe+0x18/0x1c) from [<c031ef0c>] (really_probe+0x64/0x1d8) [<c031ef0c>] (really_probe+0x64/0x1d8) from [<c031f0c8>] (driver_probe_device+0x48/0x60) [<c031f0c8>] (driver_probe_device+0x48/0x60) from [<c031f174>] (__driver_attach+0x94/0x98) [<c031f174>] (__driver_attach+0x94/0x98) from [<c031d7a0>] (bus_for_each_dev+0x54/0x80) [<c031d7a0>] (bus_for_each_dev+0x54/0x80) from [<c031ded8>] (bus_add_driver+0xac/0x2a8) [<c031ded8>] (bus_add_driver+0xac/0x2a8) from [<c031f770>] (driver_register+0x78/0x180) [<c031f770>] (driver_register+0x78/0x180) from [<c0008790>] (do_one_initcall+0x34/0x184) [<c0008790>] (do_one_initcall+0x34/0x184) from [<c073f2bc>] (do_basic_setup+0x9c/0xc8) [<c073f2bc>] (do_basic_setup+0x9c/0xc8) from [<c073f3cc>] (kernel_init+0x64/0xec) [<c073f3cc>] (kernel_init+0x64/0xec) from [<c00150cc>] (kernel_thread_exit+0x0/0x8) Code: e1c812b6 e8bd87f0 e7f001f2 eafffffe (e7f001f2) ---[ end trace 3ed3c618b26ff3e8 ]--- Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b This patch fixes the tvp5150_read() function to return an error in case the I2C transaction fails. tvp5150_probe() and other relevant driver callbacks changed to check the status of the I2C read operations. In case of a read error throw an error message with v4l2_err() instead of v4l2_dbg(). [mchehab@redhat.com: Fix a small typo breaking compilation] Signed-off-by: Dmitry Lifshitz <lifshitz@compulab.co.il> Signed-off-by: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-06-13 10:49:30 +00:00
int i, ret = 0;
if (std == V4L2_STD_ALL) {
v4l2_err(sd, "VBI can't be configured without knowing number of lines\n");
return 0;
} else if (std & V4L2_STD_625_50) {
/* Don't follow NTSC Line number convension */
line += 3;
}
if (line < 6 || line > 27)
return 0;
reg = ((line - 6) << 1) + TVP5150_LINE_MODE_INI;
[media] tvp5150: fix kernel crash if chip is unavailable tvp5150 driver probe function doesn't check if the chip is present. Thus the driver can be loaded without having a device. This is dangerous and can cause kernel crash like this: Kernel BUG at c03c0964 [verbose debug info unavailable] Internal error: Oops - BUG: 0 [#1] PREEMPT ARM Modules linked in: CPU: 0 Tainted: G W (3.4.0-cm-t3730+ #2) PC is at media_entity_create_link+0xe4/0xf4 LR is at isp_register_entities+0x228/0x2f4 pc : [<c03c0964>] lr : [<c03f3b30>] psr: 60000013 sp : cf02de50 ip : 00000000 fp : c079405c r10: 00000000 r9 : 00000000 r8 : cf33c800 r7 : c0794834 r6 : 00000000 r5 : 00000000 r4 : cf365b48 r3 : 00000000 r2 : cf365b48 r1 : 00000000 r0 : cf33c800 Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment kernel Control: 10c5387d Table: 80004019 DAC: 00000015 Process swapper (pid: 1, stack limit = 0xcf02c2f0) Stack: (0xcf02de50 to 0xcf02e000) de40: cf360000 cf366f28 cf366218 c0794834 de60: cf365b48 00000000 cf33c800 c03f3b30 00000000 00000000 cf360890 cf3668a0 de80: 00000003 cf360000 c0785a58 00000000 cf360528 00000000 00000000 00003fff dea0: cf360500 c03f4cdc c06cc1f4 cf360000 c0785a58 c0d27808 c07d55ec c0785a58 dec0: c031f0e0 c07d55ec c0776900 000000bb 00000000 c032040c c03203f4 c031ef0c dee0: c0785a58 c07d55ec c0785a8c c031f0e0 c075e670 c031f0c8 cf02deb8 c0785a58 df00: c07d55ec c031f174 c07d55ec 00000000 cf02df18 c031d7a0 cf01d4a8 cf068b10 df20: 00000000 c07d55ec c07c74d0 cf34bcc0 00000000 c031ded8 c0672340 c054cd38 df40: 00000000 c07e68c0 c07d55ec 00000000 00000000 c075e670 c0776900 000000bb df60: 00000000 c031f770 c07e68c0 00000007 c07e68c0 00000000 c075e670 c0008790 df80: 000000bb 00000006 00000006 c066e650 cf02dfa4 c07689b8 c07689b8 00000007 dfa0: c07e68c0 c073f2e8 c07689c0 000000bb 00000000 c073f2bc 00000006 00000006 dfc0: c073f2e8 00000000 c077649c c077649c c00150cc 00000013 00000000 00000000 dfe0: 00000000 c073f3cc cf02dfe8 00000000 c073f368 c00150cc 00000000 00000000 [<c03c0964>] (media_entity_create_link+0xe4/0xf4) from [<c03f3b30>] (isp_register_entities+0x228/0x2f4) [<c03f3b30>] (isp_register_entities+0x228/0x2f4) from [<c03f4cdc>] (isp_probe+0x7ac/0x9b8) [<c03f4cdc>] (isp_probe+0x7ac/0x9b8) from [<c032040c>] (platform_drv_probe+0x18/0x1c) [<c032040c>] (platform_drv_probe+0x18/0x1c) from [<c031ef0c>] (really_probe+0x64/0x1d8) [<c031ef0c>] (really_probe+0x64/0x1d8) from [<c031f0c8>] (driver_probe_device+0x48/0x60) [<c031f0c8>] (driver_probe_device+0x48/0x60) from [<c031f174>] (__driver_attach+0x94/0x98) [<c031f174>] (__driver_attach+0x94/0x98) from [<c031d7a0>] (bus_for_each_dev+0x54/0x80) [<c031d7a0>] (bus_for_each_dev+0x54/0x80) from [<c031ded8>] (bus_add_driver+0xac/0x2a8) [<c031ded8>] (bus_add_driver+0xac/0x2a8) from [<c031f770>] (driver_register+0x78/0x180) [<c031f770>] (driver_register+0x78/0x180) from [<c0008790>] (do_one_initcall+0x34/0x184) [<c0008790>] (do_one_initcall+0x34/0x184) from [<c073f2bc>] (do_basic_setup+0x9c/0xc8) [<c073f2bc>] (do_basic_setup+0x9c/0xc8) from [<c073f3cc>] (kernel_init+0x64/0xec) [<c073f3cc>] (kernel_init+0x64/0xec) from [<c00150cc>] (kernel_thread_exit+0x0/0x8) Code: e1c812b6 e8bd87f0 e7f001f2 eafffffe (e7f001f2) ---[ end trace 3ed3c618b26ff3e8 ]--- Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b This patch fixes the tvp5150_read() function to return an error in case the I2C transaction fails. tvp5150_probe() and other relevant driver callbacks changed to check the status of the I2C read operations. In case of a read error throw an error message with v4l2_err() instead of v4l2_dbg(). [mchehab@redhat.com: Fix a small typo breaking compilation] Signed-off-by: Dmitry Lifshitz <lifshitz@compulab.co.il> Signed-off-by: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-06-13 10:49:30 +00:00
for (i = 0; i <= 1; i++) {
ret = tvp5150_read(sd, reg + i);
if (ret < 0) {
v4l2_err(sd, "%s: failed with error = %d\n",
__func__, ret);
return 0;
}
pos = ret & 0x0f;
if (pos < 0x0f)
type |= regs[pos].type.vbi_type;
}
return type;
}
static int tvp5150_set_std(struct v4l2_subdev *sd, v4l2_std_id std)
{
struct tvp5150 *decoder = to_tvp5150(sd);
int fmt = 0;
decoder->norm = std;
/* First tests should be against specific std */
if (std == V4L2_STD_NTSC_443) {
fmt = VIDEO_STD_NTSC_4_43_BIT;
} else if (std == V4L2_STD_PAL_M) {
fmt = VIDEO_STD_PAL_M_BIT;
} else if (std == V4L2_STD_PAL_N || std == V4L2_STD_PAL_Nc) {
fmt = VIDEO_STD_PAL_COMBINATION_N_BIT;
} else {
/* Then, test against generic ones */
if (std & V4L2_STD_NTSC)
fmt = VIDEO_STD_NTSC_MJ_BIT;
else if (std & V4L2_STD_PAL)
fmt = VIDEO_STD_PAL_BDGHIN_BIT;
else if (std & V4L2_STD_SECAM)
fmt = VIDEO_STD_SECAM_BIT;
}
v4l2_dbg(1, debug, sd, "Set video std register to %d.\n", fmt);
tvp5150_write(sd, TVP5150_VIDEO_STD, fmt);
return 0;
}
static int tvp5150_s_std(struct v4l2_subdev *sd, v4l2_std_id std)
{
struct tvp5150 *decoder = to_tvp5150(sd);
if (decoder->norm == std)
return 0;
/* Change cropping height limits */
if (std & V4L2_STD_525_60)
decoder->rect.height = TVP5150_V_MAX_525_60;
else
decoder->rect.height = TVP5150_V_MAX_OTHERS;
return tvp5150_set_std(sd, std);
}
static int tvp5150_reset(struct v4l2_subdev *sd, u32 val)
{
struct tvp5150 *decoder = to_tvp5150(sd);
/* Initializes TVP5150 to its default values */
tvp5150_write_inittab(sd, tvp5150_init_default);
/* Initializes VDP registers */
tvp5150_vdp_init(sd, vbi_ram_default);
/* Selects decoder input */
tvp5150_selmux(sd);
/* Initializes TVP5150 to stream enabled values */
tvp5150_write_inittab(sd, tvp5150_init_enable);
/* Initialize image preferences */
v4l2_ctrl_handler_setup(&decoder->hdl);
tvp5150_set_std(sd, decoder->norm);
return 0;
};
static int tvp5150_s_ctrl(struct v4l2_ctrl *ctrl)
{
struct v4l2_subdev *sd = to_sd(ctrl);
switch (ctrl->id) {
case V4L2_CID_BRIGHTNESS:
tvp5150_write(sd, TVP5150_BRIGHT_CTL, ctrl->val);
return 0;
case V4L2_CID_CONTRAST:
tvp5150_write(sd, TVP5150_CONTRAST_CTL, ctrl->val);
return 0;
case V4L2_CID_SATURATION:
tvp5150_write(sd, TVP5150_SATURATION_CTL, ctrl->val);
return 0;
case V4L2_CID_HUE:
tvp5150_write(sd, TVP5150_HUE_CTL, ctrl->val);
return 0;
}
return -EINVAL;
}
static v4l2_std_id tvp5150_read_std(struct v4l2_subdev *sd)
{
int val = tvp5150_read(sd, TVP5150_STATUS_REG_5);
switch (val & 0x0F) {
case 0x01:
return V4L2_STD_NTSC;
case 0x03:
return V4L2_STD_PAL;
case 0x05:
return V4L2_STD_PAL_M;
case 0x07:
return V4L2_STD_PAL_N | V4L2_STD_PAL_Nc;
case 0x09:
return V4L2_STD_NTSC_443;
case 0xb:
return V4L2_STD_SECAM;
default:
return V4L2_STD_UNKNOWN;
}
}
static int tvp5150_enum_mbus_fmt(struct v4l2_subdev *sd, unsigned index,
enum v4l2_mbus_pixelcode *code)
{
if (index)
return -EINVAL;
*code = V4L2_MBUS_FMT_UYVY8_2X8;
return 0;
}
static int tvp5150_mbus_fmt(struct v4l2_subdev *sd,
struct v4l2_mbus_framefmt *f)
{
struct tvp5150 *decoder = to_tvp5150(sd);
if (f == NULL)
return -EINVAL;
tvp5150_reset(sd, 0);
f->width = decoder->rect.width;
f->height = decoder->rect.height;
f->code = V4L2_MBUS_FMT_UYVY8_2X8;
f->field = V4L2_FIELD_SEQ_TB;
f->colorspace = V4L2_COLORSPACE_SMPTE170M;
v4l2_dbg(1, debug, sd, "width = %d, height = %d\n", f->width,
f->height);
return 0;
}
static int tvp5150_s_crop(struct v4l2_subdev *sd, const struct v4l2_crop *a)
{
struct v4l2_rect rect = a->c;
struct tvp5150 *decoder = to_tvp5150(sd);
v4l2_std_id std;
unsigned int hmax;
v4l2_dbg(1, debug, sd, "%s left=%d, top=%d, width=%d, height=%d\n",
__func__, rect.left, rect.top, rect.width, rect.height);
if (a->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
return -EINVAL;
/* tvp5150 has some special limits */
rect.left = clamp(rect.left, 0, TVP5150_MAX_CROP_LEFT);
rect.width = clamp_t(unsigned int, rect.width,
TVP5150_H_MAX - TVP5150_MAX_CROP_LEFT - rect.left,
TVP5150_H_MAX - rect.left);
rect.top = clamp(rect.top, 0, TVP5150_MAX_CROP_TOP);
/* Calculate height based on current standard */
if (decoder->norm == V4L2_STD_ALL)
std = tvp5150_read_std(sd);
else
std = decoder->norm;
if (std & V4L2_STD_525_60)
hmax = TVP5150_V_MAX_525_60;
else
hmax = TVP5150_V_MAX_OTHERS;
rect.height = clamp_t(unsigned int, rect.height,
hmax - TVP5150_MAX_CROP_TOP - rect.top,
hmax - rect.top);
tvp5150_write(sd, TVP5150_VERT_BLANKING_START, rect.top);
tvp5150_write(sd, TVP5150_VERT_BLANKING_STOP,
rect.top + rect.height - hmax);
tvp5150_write(sd, TVP5150_ACT_VD_CROP_ST_MSB,
rect.left >> TVP5150_CROP_SHIFT);
tvp5150_write(sd, TVP5150_ACT_VD_CROP_ST_LSB,
rect.left | (1 << TVP5150_CROP_SHIFT));
tvp5150_write(sd, TVP5150_ACT_VD_CROP_STP_MSB,
(rect.left + rect.width - TVP5150_MAX_CROP_LEFT) >>
TVP5150_CROP_SHIFT);
tvp5150_write(sd, TVP5150_ACT_VD_CROP_STP_LSB,
rect.left + rect.width - TVP5150_MAX_CROP_LEFT);
decoder->rect = rect;
return 0;
}
static int tvp5150_g_crop(struct v4l2_subdev *sd, struct v4l2_crop *a)
{
struct tvp5150 *decoder = to_tvp5150(sd);
a->c = decoder->rect;
a->type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
return 0;
}
static int tvp5150_cropcap(struct v4l2_subdev *sd, struct v4l2_cropcap *a)
{
struct tvp5150 *decoder = to_tvp5150(sd);
v4l2_std_id std;
if (a->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
return -EINVAL;
a->bounds.left = 0;
a->bounds.top = 0;
a->bounds.width = TVP5150_H_MAX;
/* Calculate height based on current standard */
if (decoder->norm == V4L2_STD_ALL)
std = tvp5150_read_std(sd);
else
std = decoder->norm;
if (std & V4L2_STD_525_60)
a->bounds.height = TVP5150_V_MAX_525_60;
else
a->bounds.height = TVP5150_V_MAX_OTHERS;
a->defrect = a->bounds;
a->pixelaspect.numerator = 1;
a->pixelaspect.denominator = 1;
return 0;
}
/****************************************************************************
I2C Command
****************************************************************************/
static int tvp5150_s_routing(struct v4l2_subdev *sd,
u32 input, u32 output, u32 config)
{
struct tvp5150 *decoder = to_tvp5150(sd);
decoder->input = input;
decoder->output = output;
tvp5150_selmux(sd);
return 0;
}
static int tvp5150_s_raw_fmt(struct v4l2_subdev *sd, struct v4l2_vbi_format *fmt)
{
/* this is for capturing 36 raw vbi lines
if there's a way to cut off the beginning 2 vbi lines
with the tvp5150 then the vbi line count could be lowered
to 17 lines/field again, although I couldn't find a register
which could do that cropping */
if (fmt->sample_format == V4L2_PIX_FMT_GREY)
tvp5150_write(sd, TVP5150_LUMA_PROC_CTL_1, 0x70);
if (fmt->count[0] == 18 && fmt->count[1] == 18) {
tvp5150_write(sd, TVP5150_VERT_BLANKING_START, 0x00);
tvp5150_write(sd, TVP5150_VERT_BLANKING_STOP, 0x01);
}
return 0;
}
static int tvp5150_s_sliced_fmt(struct v4l2_subdev *sd, struct v4l2_sliced_vbi_format *svbi)
{
int i;
if (svbi->service_set != 0) {
for (i = 0; i <= 23; i++) {
svbi->service_lines[1][i] = 0;
svbi->service_lines[0][i] =
tvp5150_set_vbi(sd, vbi_ram_default,
svbi->service_lines[0][i], 0xf0, i, 3);
}
/* Enables FIFO */
tvp5150_write(sd, TVP5150_FIFO_OUT_CTRL, 1);
} else {
/* Disables FIFO*/
tvp5150_write(sd, TVP5150_FIFO_OUT_CTRL, 0);
/* Disable Full Field */
tvp5150_write(sd, TVP5150_FULL_FIELD_ENA, 0);
/* Disable Line modes */
for (i = TVP5150_LINE_MODE_INI; i <= TVP5150_LINE_MODE_END; i++)
tvp5150_write(sd, i, 0xff);
}
return 0;
}
static int tvp5150_g_sliced_fmt(struct v4l2_subdev *sd, struct v4l2_sliced_vbi_format *svbi)
{
int i, mask = 0;
memset(svbi->service_lines, 0, sizeof(svbi->service_lines));
for (i = 0; i <= 23; i++) {
svbi->service_lines[0][i] =
tvp5150_get_vbi(sd, vbi_ram_default, i);
mask |= svbi->service_lines[0][i];
}
svbi->service_set = mask;
return 0;
}
#ifdef CONFIG_VIDEO_ADV_DEBUG
static int tvp5150_g_register(struct v4l2_subdev *sd, struct v4l2_dbg_register *reg)
{
[media] tvp5150: fix kernel crash if chip is unavailable tvp5150 driver probe function doesn't check if the chip is present. Thus the driver can be loaded without having a device. This is dangerous and can cause kernel crash like this: Kernel BUG at c03c0964 [verbose debug info unavailable] Internal error: Oops - BUG: 0 [#1] PREEMPT ARM Modules linked in: CPU: 0 Tainted: G W (3.4.0-cm-t3730+ #2) PC is at media_entity_create_link+0xe4/0xf4 LR is at isp_register_entities+0x228/0x2f4 pc : [<c03c0964>] lr : [<c03f3b30>] psr: 60000013 sp : cf02de50 ip : 00000000 fp : c079405c r10: 00000000 r9 : 00000000 r8 : cf33c800 r7 : c0794834 r6 : 00000000 r5 : 00000000 r4 : cf365b48 r3 : 00000000 r2 : cf365b48 r1 : 00000000 r0 : cf33c800 Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment kernel Control: 10c5387d Table: 80004019 DAC: 00000015 Process swapper (pid: 1, stack limit = 0xcf02c2f0) Stack: (0xcf02de50 to 0xcf02e000) de40: cf360000 cf366f28 cf366218 c0794834 de60: cf365b48 00000000 cf33c800 c03f3b30 00000000 00000000 cf360890 cf3668a0 de80: 00000003 cf360000 c0785a58 00000000 cf360528 00000000 00000000 00003fff dea0: cf360500 c03f4cdc c06cc1f4 cf360000 c0785a58 c0d27808 c07d55ec c0785a58 dec0: c031f0e0 c07d55ec c0776900 000000bb 00000000 c032040c c03203f4 c031ef0c dee0: c0785a58 c07d55ec c0785a8c c031f0e0 c075e670 c031f0c8 cf02deb8 c0785a58 df00: c07d55ec c031f174 c07d55ec 00000000 cf02df18 c031d7a0 cf01d4a8 cf068b10 df20: 00000000 c07d55ec c07c74d0 cf34bcc0 00000000 c031ded8 c0672340 c054cd38 df40: 00000000 c07e68c0 c07d55ec 00000000 00000000 c075e670 c0776900 000000bb df60: 00000000 c031f770 c07e68c0 00000007 c07e68c0 00000000 c075e670 c0008790 df80: 000000bb 00000006 00000006 c066e650 cf02dfa4 c07689b8 c07689b8 00000007 dfa0: c07e68c0 c073f2e8 c07689c0 000000bb 00000000 c073f2bc 00000006 00000006 dfc0: c073f2e8 00000000 c077649c c077649c c00150cc 00000013 00000000 00000000 dfe0: 00000000 c073f3cc cf02dfe8 00000000 c073f368 c00150cc 00000000 00000000 [<c03c0964>] (media_entity_create_link+0xe4/0xf4) from [<c03f3b30>] (isp_register_entities+0x228/0x2f4) [<c03f3b30>] (isp_register_entities+0x228/0x2f4) from [<c03f4cdc>] (isp_probe+0x7ac/0x9b8) [<c03f4cdc>] (isp_probe+0x7ac/0x9b8) from [<c032040c>] (platform_drv_probe+0x18/0x1c) [<c032040c>] (platform_drv_probe+0x18/0x1c) from [<c031ef0c>] (really_probe+0x64/0x1d8) [<c031ef0c>] (really_probe+0x64/0x1d8) from [<c031f0c8>] (driver_probe_device+0x48/0x60) [<c031f0c8>] (driver_probe_device+0x48/0x60) from [<c031f174>] (__driver_attach+0x94/0x98) [<c031f174>] (__driver_attach+0x94/0x98) from [<c031d7a0>] (bus_for_each_dev+0x54/0x80) [<c031d7a0>] (bus_for_each_dev+0x54/0x80) from [<c031ded8>] (bus_add_driver+0xac/0x2a8) [<c031ded8>] (bus_add_driver+0xac/0x2a8) from [<c031f770>] (driver_register+0x78/0x180) [<c031f770>] (driver_register+0x78/0x180) from [<c0008790>] (do_one_initcall+0x34/0x184) [<c0008790>] (do_one_initcall+0x34/0x184) from [<c073f2bc>] (do_basic_setup+0x9c/0xc8) [<c073f2bc>] (do_basic_setup+0x9c/0xc8) from [<c073f3cc>] (kernel_init+0x64/0xec) [<c073f3cc>] (kernel_init+0x64/0xec) from [<c00150cc>] (kernel_thread_exit+0x0/0x8) Code: e1c812b6 e8bd87f0 e7f001f2 eafffffe (e7f001f2) ---[ end trace 3ed3c618b26ff3e8 ]--- Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b This patch fixes the tvp5150_read() function to return an error in case the I2C transaction fails. tvp5150_probe() and other relevant driver callbacks changed to check the status of the I2C read operations. In case of a read error throw an error message with v4l2_err() instead of v4l2_dbg(). [mchehab@redhat.com: Fix a small typo breaking compilation] Signed-off-by: Dmitry Lifshitz <lifshitz@compulab.co.il> Signed-off-by: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-06-13 10:49:30 +00:00
int res;
res = tvp5150_read(sd, reg->reg & 0xff);
if (res < 0) {
v4l2_err(sd, "%s: failed with error = %d\n", __func__, res);
return res;
}
reg->val = res;
reg->size = 1;
return 0;
}
static int tvp5150_s_register(struct v4l2_subdev *sd, const struct v4l2_dbg_register *reg)
{
tvp5150_write(sd, reg->reg & 0xff, reg->val & 0xff);
return 0;
}
#endif
static int tvp5150_g_tuner(struct v4l2_subdev *sd, struct v4l2_tuner *vt)
{
int status = tvp5150_read(sd, 0x88);
vt->signal = ((status & 0x04) && (status & 0x02)) ? 0xffff : 0x0;
return 0;
}
/* ----------------------------------------------------------------------- */
static const struct v4l2_ctrl_ops tvp5150_ctrl_ops = {
.s_ctrl = tvp5150_s_ctrl,
};
static const struct v4l2_subdev_core_ops tvp5150_core_ops = {
.log_status = tvp5150_log_status,
.reset = tvp5150_reset,
#ifdef CONFIG_VIDEO_ADV_DEBUG
.g_register = tvp5150_g_register,
.s_register = tvp5150_s_register,
#endif
};
static const struct v4l2_subdev_tuner_ops tvp5150_tuner_ops = {
.g_tuner = tvp5150_g_tuner,
};
static const struct v4l2_subdev_video_ops tvp5150_video_ops = {
.s_std = tvp5150_s_std,
.s_routing = tvp5150_s_routing,
.enum_mbus_fmt = tvp5150_enum_mbus_fmt,
.s_mbus_fmt = tvp5150_mbus_fmt,
.try_mbus_fmt = tvp5150_mbus_fmt,
.g_mbus_fmt = tvp5150_mbus_fmt,
.s_crop = tvp5150_s_crop,
.g_crop = tvp5150_g_crop,
.cropcap = tvp5150_cropcap,
};
static const struct v4l2_subdev_vbi_ops tvp5150_vbi_ops = {
.g_sliced_vbi_cap = tvp5150_g_sliced_vbi_cap,
.g_sliced_fmt = tvp5150_g_sliced_fmt,
.s_sliced_fmt = tvp5150_s_sliced_fmt,
.s_raw_fmt = tvp5150_s_raw_fmt,
};
static const struct v4l2_subdev_ops tvp5150_ops = {
.core = &tvp5150_core_ops,
.tuner = &tvp5150_tuner_ops,
.video = &tvp5150_video_ops,
.vbi = &tvp5150_vbi_ops,
};
/****************************************************************************
I2C Client & Driver
****************************************************************************/
static int tvp5150_probe(struct i2c_client *c,
const struct i2c_device_id *id)
{
struct tvp5150 *core;
struct v4l2_subdev *sd;
[media] tvp5150: fix kernel crash if chip is unavailable tvp5150 driver probe function doesn't check if the chip is present. Thus the driver can be loaded without having a device. This is dangerous and can cause kernel crash like this: Kernel BUG at c03c0964 [verbose debug info unavailable] Internal error: Oops - BUG: 0 [#1] PREEMPT ARM Modules linked in: CPU: 0 Tainted: G W (3.4.0-cm-t3730+ #2) PC is at media_entity_create_link+0xe4/0xf4 LR is at isp_register_entities+0x228/0x2f4 pc : [<c03c0964>] lr : [<c03f3b30>] psr: 60000013 sp : cf02de50 ip : 00000000 fp : c079405c r10: 00000000 r9 : 00000000 r8 : cf33c800 r7 : c0794834 r6 : 00000000 r5 : 00000000 r4 : cf365b48 r3 : 00000000 r2 : cf365b48 r1 : 00000000 r0 : cf33c800 Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment kernel Control: 10c5387d Table: 80004019 DAC: 00000015 Process swapper (pid: 1, stack limit = 0xcf02c2f0) Stack: (0xcf02de50 to 0xcf02e000) de40: cf360000 cf366f28 cf366218 c0794834 de60: cf365b48 00000000 cf33c800 c03f3b30 00000000 00000000 cf360890 cf3668a0 de80: 00000003 cf360000 c0785a58 00000000 cf360528 00000000 00000000 00003fff dea0: cf360500 c03f4cdc c06cc1f4 cf360000 c0785a58 c0d27808 c07d55ec c0785a58 dec0: c031f0e0 c07d55ec c0776900 000000bb 00000000 c032040c c03203f4 c031ef0c dee0: c0785a58 c07d55ec c0785a8c c031f0e0 c075e670 c031f0c8 cf02deb8 c0785a58 df00: c07d55ec c031f174 c07d55ec 00000000 cf02df18 c031d7a0 cf01d4a8 cf068b10 df20: 00000000 c07d55ec c07c74d0 cf34bcc0 00000000 c031ded8 c0672340 c054cd38 df40: 00000000 c07e68c0 c07d55ec 00000000 00000000 c075e670 c0776900 000000bb df60: 00000000 c031f770 c07e68c0 00000007 c07e68c0 00000000 c075e670 c0008790 df80: 000000bb 00000006 00000006 c066e650 cf02dfa4 c07689b8 c07689b8 00000007 dfa0: c07e68c0 c073f2e8 c07689c0 000000bb 00000000 c073f2bc 00000006 00000006 dfc0: c073f2e8 00000000 c077649c c077649c c00150cc 00000013 00000000 00000000 dfe0: 00000000 c073f3cc cf02dfe8 00000000 c073f368 c00150cc 00000000 00000000 [<c03c0964>] (media_entity_create_link+0xe4/0xf4) from [<c03f3b30>] (isp_register_entities+0x228/0x2f4) [<c03f3b30>] (isp_register_entities+0x228/0x2f4) from [<c03f4cdc>] (isp_probe+0x7ac/0x9b8) [<c03f4cdc>] (isp_probe+0x7ac/0x9b8) from [<c032040c>] (platform_drv_probe+0x18/0x1c) [<c032040c>] (platform_drv_probe+0x18/0x1c) from [<c031ef0c>] (really_probe+0x64/0x1d8) [<c031ef0c>] (really_probe+0x64/0x1d8) from [<c031f0c8>] (driver_probe_device+0x48/0x60) [<c031f0c8>] (driver_probe_device+0x48/0x60) from [<c031f174>] (__driver_attach+0x94/0x98) [<c031f174>] (__driver_attach+0x94/0x98) from [<c031d7a0>] (bus_for_each_dev+0x54/0x80) [<c031d7a0>] (bus_for_each_dev+0x54/0x80) from [<c031ded8>] (bus_add_driver+0xac/0x2a8) [<c031ded8>] (bus_add_driver+0xac/0x2a8) from [<c031f770>] (driver_register+0x78/0x180) [<c031f770>] (driver_register+0x78/0x180) from [<c0008790>] (do_one_initcall+0x34/0x184) [<c0008790>] (do_one_initcall+0x34/0x184) from [<c073f2bc>] (do_basic_setup+0x9c/0xc8) [<c073f2bc>] (do_basic_setup+0x9c/0xc8) from [<c073f3cc>] (kernel_init+0x64/0xec) [<c073f3cc>] (kernel_init+0x64/0xec) from [<c00150cc>] (kernel_thread_exit+0x0/0x8) Code: e1c812b6 e8bd87f0 e7f001f2 eafffffe (e7f001f2) ---[ end trace 3ed3c618b26ff3e8 ]--- Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b This patch fixes the tvp5150_read() function to return an error in case the I2C transaction fails. tvp5150_probe() and other relevant driver callbacks changed to check the status of the I2C read operations. In case of a read error throw an error message with v4l2_err() instead of v4l2_dbg(). [mchehab@redhat.com: Fix a small typo breaking compilation] Signed-off-by: Dmitry Lifshitz <lifshitz@compulab.co.il> Signed-off-by: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-06-13 10:49:30 +00:00
int tvp5150_id[4];
int i, res;
/* Check if the adapter supports the needed features */
if (!i2c_check_functionality(c->adapter,
I2C_FUNC_SMBUS_READ_BYTE | I2C_FUNC_SMBUS_WRITE_BYTE_DATA))
return -EIO;
core = devm_kzalloc(&c->dev, sizeof(*core), GFP_KERNEL);
if (!core)
return -ENOMEM;
sd = &core->sd;
v4l2_i2c_subdev_init(sd, c, &tvp5150_ops);
[media] tvp5150: fix kernel crash if chip is unavailable tvp5150 driver probe function doesn't check if the chip is present. Thus the driver can be loaded without having a device. This is dangerous and can cause kernel crash like this: Kernel BUG at c03c0964 [verbose debug info unavailable] Internal error: Oops - BUG: 0 [#1] PREEMPT ARM Modules linked in: CPU: 0 Tainted: G W (3.4.0-cm-t3730+ #2) PC is at media_entity_create_link+0xe4/0xf4 LR is at isp_register_entities+0x228/0x2f4 pc : [<c03c0964>] lr : [<c03f3b30>] psr: 60000013 sp : cf02de50 ip : 00000000 fp : c079405c r10: 00000000 r9 : 00000000 r8 : cf33c800 r7 : c0794834 r6 : 00000000 r5 : 00000000 r4 : cf365b48 r3 : 00000000 r2 : cf365b48 r1 : 00000000 r0 : cf33c800 Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment kernel Control: 10c5387d Table: 80004019 DAC: 00000015 Process swapper (pid: 1, stack limit = 0xcf02c2f0) Stack: (0xcf02de50 to 0xcf02e000) de40: cf360000 cf366f28 cf366218 c0794834 de60: cf365b48 00000000 cf33c800 c03f3b30 00000000 00000000 cf360890 cf3668a0 de80: 00000003 cf360000 c0785a58 00000000 cf360528 00000000 00000000 00003fff dea0: cf360500 c03f4cdc c06cc1f4 cf360000 c0785a58 c0d27808 c07d55ec c0785a58 dec0: c031f0e0 c07d55ec c0776900 000000bb 00000000 c032040c c03203f4 c031ef0c dee0: c0785a58 c07d55ec c0785a8c c031f0e0 c075e670 c031f0c8 cf02deb8 c0785a58 df00: c07d55ec c031f174 c07d55ec 00000000 cf02df18 c031d7a0 cf01d4a8 cf068b10 df20: 00000000 c07d55ec c07c74d0 cf34bcc0 00000000 c031ded8 c0672340 c054cd38 df40: 00000000 c07e68c0 c07d55ec 00000000 00000000 c075e670 c0776900 000000bb df60: 00000000 c031f770 c07e68c0 00000007 c07e68c0 00000000 c075e670 c0008790 df80: 000000bb 00000006 00000006 c066e650 cf02dfa4 c07689b8 c07689b8 00000007 dfa0: c07e68c0 c073f2e8 c07689c0 000000bb 00000000 c073f2bc 00000006 00000006 dfc0: c073f2e8 00000000 c077649c c077649c c00150cc 00000013 00000000 00000000 dfe0: 00000000 c073f3cc cf02dfe8 00000000 c073f368 c00150cc 00000000 00000000 [<c03c0964>] (media_entity_create_link+0xe4/0xf4) from [<c03f3b30>] (isp_register_entities+0x228/0x2f4) [<c03f3b30>] (isp_register_entities+0x228/0x2f4) from [<c03f4cdc>] (isp_probe+0x7ac/0x9b8) [<c03f4cdc>] (isp_probe+0x7ac/0x9b8) from [<c032040c>] (platform_drv_probe+0x18/0x1c) [<c032040c>] (platform_drv_probe+0x18/0x1c) from [<c031ef0c>] (really_probe+0x64/0x1d8) [<c031ef0c>] (really_probe+0x64/0x1d8) from [<c031f0c8>] (driver_probe_device+0x48/0x60) [<c031f0c8>] (driver_probe_device+0x48/0x60) from [<c031f174>] (__driver_attach+0x94/0x98) [<c031f174>] (__driver_attach+0x94/0x98) from [<c031d7a0>] (bus_for_each_dev+0x54/0x80) [<c031d7a0>] (bus_for_each_dev+0x54/0x80) from [<c031ded8>] (bus_add_driver+0xac/0x2a8) [<c031ded8>] (bus_add_driver+0xac/0x2a8) from [<c031f770>] (driver_register+0x78/0x180) [<c031f770>] (driver_register+0x78/0x180) from [<c0008790>] (do_one_initcall+0x34/0x184) [<c0008790>] (do_one_initcall+0x34/0x184) from [<c073f2bc>] (do_basic_setup+0x9c/0xc8) [<c073f2bc>] (do_basic_setup+0x9c/0xc8) from [<c073f3cc>] (kernel_init+0x64/0xec) [<c073f3cc>] (kernel_init+0x64/0xec) from [<c00150cc>] (kernel_thread_exit+0x0/0x8) Code: e1c812b6 e8bd87f0 e7f001f2 eafffffe (e7f001f2) ---[ end trace 3ed3c618b26ff3e8 ]--- Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b This patch fixes the tvp5150_read() function to return an error in case the I2C transaction fails. tvp5150_probe() and other relevant driver callbacks changed to check the status of the I2C read operations. In case of a read error throw an error message with v4l2_err() instead of v4l2_dbg(). [mchehab@redhat.com: Fix a small typo breaking compilation] Signed-off-by: Dmitry Lifshitz <lifshitz@compulab.co.il> Signed-off-by: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-06-13 10:49:30 +00:00
/*
* Read consequent registers - TVP5150_MSB_DEV_ID, TVP5150_LSB_DEV_ID,
* TVP5150_ROM_MAJOR_VER, TVP5150_ROM_MINOR_VER
*/
for (i = 0; i < 4; i++) {
res = tvp5150_read(sd, TVP5150_MSB_DEV_ID + i);
if (res < 0)
return res;
[media] tvp5150: fix kernel crash if chip is unavailable tvp5150 driver probe function doesn't check if the chip is present. Thus the driver can be loaded without having a device. This is dangerous and can cause kernel crash like this: Kernel BUG at c03c0964 [verbose debug info unavailable] Internal error: Oops - BUG: 0 [#1] PREEMPT ARM Modules linked in: CPU: 0 Tainted: G W (3.4.0-cm-t3730+ #2) PC is at media_entity_create_link+0xe4/0xf4 LR is at isp_register_entities+0x228/0x2f4 pc : [<c03c0964>] lr : [<c03f3b30>] psr: 60000013 sp : cf02de50 ip : 00000000 fp : c079405c r10: 00000000 r9 : 00000000 r8 : cf33c800 r7 : c0794834 r6 : 00000000 r5 : 00000000 r4 : cf365b48 r3 : 00000000 r2 : cf365b48 r1 : 00000000 r0 : cf33c800 Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment kernel Control: 10c5387d Table: 80004019 DAC: 00000015 Process swapper (pid: 1, stack limit = 0xcf02c2f0) Stack: (0xcf02de50 to 0xcf02e000) de40: cf360000 cf366f28 cf366218 c0794834 de60: cf365b48 00000000 cf33c800 c03f3b30 00000000 00000000 cf360890 cf3668a0 de80: 00000003 cf360000 c0785a58 00000000 cf360528 00000000 00000000 00003fff dea0: cf360500 c03f4cdc c06cc1f4 cf360000 c0785a58 c0d27808 c07d55ec c0785a58 dec0: c031f0e0 c07d55ec c0776900 000000bb 00000000 c032040c c03203f4 c031ef0c dee0: c0785a58 c07d55ec c0785a8c c031f0e0 c075e670 c031f0c8 cf02deb8 c0785a58 df00: c07d55ec c031f174 c07d55ec 00000000 cf02df18 c031d7a0 cf01d4a8 cf068b10 df20: 00000000 c07d55ec c07c74d0 cf34bcc0 00000000 c031ded8 c0672340 c054cd38 df40: 00000000 c07e68c0 c07d55ec 00000000 00000000 c075e670 c0776900 000000bb df60: 00000000 c031f770 c07e68c0 00000007 c07e68c0 00000000 c075e670 c0008790 df80: 000000bb 00000006 00000006 c066e650 cf02dfa4 c07689b8 c07689b8 00000007 dfa0: c07e68c0 c073f2e8 c07689c0 000000bb 00000000 c073f2bc 00000006 00000006 dfc0: c073f2e8 00000000 c077649c c077649c c00150cc 00000013 00000000 00000000 dfe0: 00000000 c073f3cc cf02dfe8 00000000 c073f368 c00150cc 00000000 00000000 [<c03c0964>] (media_entity_create_link+0xe4/0xf4) from [<c03f3b30>] (isp_register_entities+0x228/0x2f4) [<c03f3b30>] (isp_register_entities+0x228/0x2f4) from [<c03f4cdc>] (isp_probe+0x7ac/0x9b8) [<c03f4cdc>] (isp_probe+0x7ac/0x9b8) from [<c032040c>] (platform_drv_probe+0x18/0x1c) [<c032040c>] (platform_drv_probe+0x18/0x1c) from [<c031ef0c>] (really_probe+0x64/0x1d8) [<c031ef0c>] (really_probe+0x64/0x1d8) from [<c031f0c8>] (driver_probe_device+0x48/0x60) [<c031f0c8>] (driver_probe_device+0x48/0x60) from [<c031f174>] (__driver_attach+0x94/0x98) [<c031f174>] (__driver_attach+0x94/0x98) from [<c031d7a0>] (bus_for_each_dev+0x54/0x80) [<c031d7a0>] (bus_for_each_dev+0x54/0x80) from [<c031ded8>] (bus_add_driver+0xac/0x2a8) [<c031ded8>] (bus_add_driver+0xac/0x2a8) from [<c031f770>] (driver_register+0x78/0x180) [<c031f770>] (driver_register+0x78/0x180) from [<c0008790>] (do_one_initcall+0x34/0x184) [<c0008790>] (do_one_initcall+0x34/0x184) from [<c073f2bc>] (do_basic_setup+0x9c/0xc8) [<c073f2bc>] (do_basic_setup+0x9c/0xc8) from [<c073f3cc>] (kernel_init+0x64/0xec) [<c073f3cc>] (kernel_init+0x64/0xec) from [<c00150cc>] (kernel_thread_exit+0x0/0x8) Code: e1c812b6 e8bd87f0 e7f001f2 eafffffe (e7f001f2) ---[ end trace 3ed3c618b26ff3e8 ]--- Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b This patch fixes the tvp5150_read() function to return an error in case the I2C transaction fails. tvp5150_probe() and other relevant driver callbacks changed to check the status of the I2C read operations. In case of a read error throw an error message with v4l2_err() instead of v4l2_dbg(). [mchehab@redhat.com: Fix a small typo breaking compilation] Signed-off-by: Dmitry Lifshitz <lifshitz@compulab.co.il> Signed-off-by: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-06-13 10:49:30 +00:00
tvp5150_id[i] = res;
}
v4l_info(c, "chip found @ 0x%02x (%s)\n",
c->addr << 1, c->adapter->name);
[media] tvp5150: fix kernel crash if chip is unavailable tvp5150 driver probe function doesn't check if the chip is present. Thus the driver can be loaded without having a device. This is dangerous and can cause kernel crash like this: Kernel BUG at c03c0964 [verbose debug info unavailable] Internal error: Oops - BUG: 0 [#1] PREEMPT ARM Modules linked in: CPU: 0 Tainted: G W (3.4.0-cm-t3730+ #2) PC is at media_entity_create_link+0xe4/0xf4 LR is at isp_register_entities+0x228/0x2f4 pc : [<c03c0964>] lr : [<c03f3b30>] psr: 60000013 sp : cf02de50 ip : 00000000 fp : c079405c r10: 00000000 r9 : 00000000 r8 : cf33c800 r7 : c0794834 r6 : 00000000 r5 : 00000000 r4 : cf365b48 r3 : 00000000 r2 : cf365b48 r1 : 00000000 r0 : cf33c800 Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment kernel Control: 10c5387d Table: 80004019 DAC: 00000015 Process swapper (pid: 1, stack limit = 0xcf02c2f0) Stack: (0xcf02de50 to 0xcf02e000) de40: cf360000 cf366f28 cf366218 c0794834 de60: cf365b48 00000000 cf33c800 c03f3b30 00000000 00000000 cf360890 cf3668a0 de80: 00000003 cf360000 c0785a58 00000000 cf360528 00000000 00000000 00003fff dea0: cf360500 c03f4cdc c06cc1f4 cf360000 c0785a58 c0d27808 c07d55ec c0785a58 dec0: c031f0e0 c07d55ec c0776900 000000bb 00000000 c032040c c03203f4 c031ef0c dee0: c0785a58 c07d55ec c0785a8c c031f0e0 c075e670 c031f0c8 cf02deb8 c0785a58 df00: c07d55ec c031f174 c07d55ec 00000000 cf02df18 c031d7a0 cf01d4a8 cf068b10 df20: 00000000 c07d55ec c07c74d0 cf34bcc0 00000000 c031ded8 c0672340 c054cd38 df40: 00000000 c07e68c0 c07d55ec 00000000 00000000 c075e670 c0776900 000000bb df60: 00000000 c031f770 c07e68c0 00000007 c07e68c0 00000000 c075e670 c0008790 df80: 000000bb 00000006 00000006 c066e650 cf02dfa4 c07689b8 c07689b8 00000007 dfa0: c07e68c0 c073f2e8 c07689c0 000000bb 00000000 c073f2bc 00000006 00000006 dfc0: c073f2e8 00000000 c077649c c077649c c00150cc 00000013 00000000 00000000 dfe0: 00000000 c073f3cc cf02dfe8 00000000 c073f368 c00150cc 00000000 00000000 [<c03c0964>] (media_entity_create_link+0xe4/0xf4) from [<c03f3b30>] (isp_register_entities+0x228/0x2f4) [<c03f3b30>] (isp_register_entities+0x228/0x2f4) from [<c03f4cdc>] (isp_probe+0x7ac/0x9b8) [<c03f4cdc>] (isp_probe+0x7ac/0x9b8) from [<c032040c>] (platform_drv_probe+0x18/0x1c) [<c032040c>] (platform_drv_probe+0x18/0x1c) from [<c031ef0c>] (really_probe+0x64/0x1d8) [<c031ef0c>] (really_probe+0x64/0x1d8) from [<c031f0c8>] (driver_probe_device+0x48/0x60) [<c031f0c8>] (driver_probe_device+0x48/0x60) from [<c031f174>] (__driver_attach+0x94/0x98) [<c031f174>] (__driver_attach+0x94/0x98) from [<c031d7a0>] (bus_for_each_dev+0x54/0x80) [<c031d7a0>] (bus_for_each_dev+0x54/0x80) from [<c031ded8>] (bus_add_driver+0xac/0x2a8) [<c031ded8>] (bus_add_driver+0xac/0x2a8) from [<c031f770>] (driver_register+0x78/0x180) [<c031f770>] (driver_register+0x78/0x180) from [<c0008790>] (do_one_initcall+0x34/0x184) [<c0008790>] (do_one_initcall+0x34/0x184) from [<c073f2bc>] (do_basic_setup+0x9c/0xc8) [<c073f2bc>] (do_basic_setup+0x9c/0xc8) from [<c073f3cc>] (kernel_init+0x64/0xec) [<c073f3cc>] (kernel_init+0x64/0xec) from [<c00150cc>] (kernel_thread_exit+0x0/0x8) Code: e1c812b6 e8bd87f0 e7f001f2 eafffffe (e7f001f2) ---[ end trace 3ed3c618b26ff3e8 ]--- Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b This patch fixes the tvp5150_read() function to return an error in case the I2C transaction fails. tvp5150_probe() and other relevant driver callbacks changed to check the status of the I2C read operations. In case of a read error throw an error message with v4l2_err() instead of v4l2_dbg(). [mchehab@redhat.com: Fix a small typo breaking compilation] Signed-off-by: Dmitry Lifshitz <lifshitz@compulab.co.il> Signed-off-by: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-06-13 10:49:30 +00:00
if (tvp5150_id[2] == 4 && tvp5150_id[3] == 0) { /* Is TVP5150AM1 */
v4l2_info(sd, "tvp%02x%02xam1 detected.\n",
tvp5150_id[0], tvp5150_id[1]);
/* ITU-T BT.656.4 timing */
tvp5150_write(sd, TVP5150_REV_SELECT, 0);
} else {
[media] tvp5150: fix kernel crash if chip is unavailable tvp5150 driver probe function doesn't check if the chip is present. Thus the driver can be loaded without having a device. This is dangerous and can cause kernel crash like this: Kernel BUG at c03c0964 [verbose debug info unavailable] Internal error: Oops - BUG: 0 [#1] PREEMPT ARM Modules linked in: CPU: 0 Tainted: G W (3.4.0-cm-t3730+ #2) PC is at media_entity_create_link+0xe4/0xf4 LR is at isp_register_entities+0x228/0x2f4 pc : [<c03c0964>] lr : [<c03f3b30>] psr: 60000013 sp : cf02de50 ip : 00000000 fp : c079405c r10: 00000000 r9 : 00000000 r8 : cf33c800 r7 : c0794834 r6 : 00000000 r5 : 00000000 r4 : cf365b48 r3 : 00000000 r2 : cf365b48 r1 : 00000000 r0 : cf33c800 Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment kernel Control: 10c5387d Table: 80004019 DAC: 00000015 Process swapper (pid: 1, stack limit = 0xcf02c2f0) Stack: (0xcf02de50 to 0xcf02e000) de40: cf360000 cf366f28 cf366218 c0794834 de60: cf365b48 00000000 cf33c800 c03f3b30 00000000 00000000 cf360890 cf3668a0 de80: 00000003 cf360000 c0785a58 00000000 cf360528 00000000 00000000 00003fff dea0: cf360500 c03f4cdc c06cc1f4 cf360000 c0785a58 c0d27808 c07d55ec c0785a58 dec0: c031f0e0 c07d55ec c0776900 000000bb 00000000 c032040c c03203f4 c031ef0c dee0: c0785a58 c07d55ec c0785a8c c031f0e0 c075e670 c031f0c8 cf02deb8 c0785a58 df00: c07d55ec c031f174 c07d55ec 00000000 cf02df18 c031d7a0 cf01d4a8 cf068b10 df20: 00000000 c07d55ec c07c74d0 cf34bcc0 00000000 c031ded8 c0672340 c054cd38 df40: 00000000 c07e68c0 c07d55ec 00000000 00000000 c075e670 c0776900 000000bb df60: 00000000 c031f770 c07e68c0 00000007 c07e68c0 00000000 c075e670 c0008790 df80: 000000bb 00000006 00000006 c066e650 cf02dfa4 c07689b8 c07689b8 00000007 dfa0: c07e68c0 c073f2e8 c07689c0 000000bb 00000000 c073f2bc 00000006 00000006 dfc0: c073f2e8 00000000 c077649c c077649c c00150cc 00000013 00000000 00000000 dfe0: 00000000 c073f3cc cf02dfe8 00000000 c073f368 c00150cc 00000000 00000000 [<c03c0964>] (media_entity_create_link+0xe4/0xf4) from [<c03f3b30>] (isp_register_entities+0x228/0x2f4) [<c03f3b30>] (isp_register_entities+0x228/0x2f4) from [<c03f4cdc>] (isp_probe+0x7ac/0x9b8) [<c03f4cdc>] (isp_probe+0x7ac/0x9b8) from [<c032040c>] (platform_drv_probe+0x18/0x1c) [<c032040c>] (platform_drv_probe+0x18/0x1c) from [<c031ef0c>] (really_probe+0x64/0x1d8) [<c031ef0c>] (really_probe+0x64/0x1d8) from [<c031f0c8>] (driver_probe_device+0x48/0x60) [<c031f0c8>] (driver_probe_device+0x48/0x60) from [<c031f174>] (__driver_attach+0x94/0x98) [<c031f174>] (__driver_attach+0x94/0x98) from [<c031d7a0>] (bus_for_each_dev+0x54/0x80) [<c031d7a0>] (bus_for_each_dev+0x54/0x80) from [<c031ded8>] (bus_add_driver+0xac/0x2a8) [<c031ded8>] (bus_add_driver+0xac/0x2a8) from [<c031f770>] (driver_register+0x78/0x180) [<c031f770>] (driver_register+0x78/0x180) from [<c0008790>] (do_one_initcall+0x34/0x184) [<c0008790>] (do_one_initcall+0x34/0x184) from [<c073f2bc>] (do_basic_setup+0x9c/0xc8) [<c073f2bc>] (do_basic_setup+0x9c/0xc8) from [<c073f3cc>] (kernel_init+0x64/0xec) [<c073f3cc>] (kernel_init+0x64/0xec) from [<c00150cc>] (kernel_thread_exit+0x0/0x8) Code: e1c812b6 e8bd87f0 e7f001f2 eafffffe (e7f001f2) ---[ end trace 3ed3c618b26ff3e8 ]--- Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b This patch fixes the tvp5150_read() function to return an error in case the I2C transaction fails. tvp5150_probe() and other relevant driver callbacks changed to check the status of the I2C read operations. In case of a read error throw an error message with v4l2_err() instead of v4l2_dbg(). [mchehab@redhat.com: Fix a small typo breaking compilation] Signed-off-by: Dmitry Lifshitz <lifshitz@compulab.co.il> Signed-off-by: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-06-13 10:49:30 +00:00
/* Is TVP5150A */
if (tvp5150_id[2] == 3 || tvp5150_id[3] == 0x21) {
v4l2_info(sd, "tvp%02x%02xa detected.\n",
tvp5150_id[2], tvp5150_id[3]);
} else {
v4l2_info(sd, "*** unknown tvp%02x%02x chip detected.\n",
[media] tvp5150: fix kernel crash if chip is unavailable tvp5150 driver probe function doesn't check if the chip is present. Thus the driver can be loaded without having a device. This is dangerous and can cause kernel crash like this: Kernel BUG at c03c0964 [verbose debug info unavailable] Internal error: Oops - BUG: 0 [#1] PREEMPT ARM Modules linked in: CPU: 0 Tainted: G W (3.4.0-cm-t3730+ #2) PC is at media_entity_create_link+0xe4/0xf4 LR is at isp_register_entities+0x228/0x2f4 pc : [<c03c0964>] lr : [<c03f3b30>] psr: 60000013 sp : cf02de50 ip : 00000000 fp : c079405c r10: 00000000 r9 : 00000000 r8 : cf33c800 r7 : c0794834 r6 : 00000000 r5 : 00000000 r4 : cf365b48 r3 : 00000000 r2 : cf365b48 r1 : 00000000 r0 : cf33c800 Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment kernel Control: 10c5387d Table: 80004019 DAC: 00000015 Process swapper (pid: 1, stack limit = 0xcf02c2f0) Stack: (0xcf02de50 to 0xcf02e000) de40: cf360000 cf366f28 cf366218 c0794834 de60: cf365b48 00000000 cf33c800 c03f3b30 00000000 00000000 cf360890 cf3668a0 de80: 00000003 cf360000 c0785a58 00000000 cf360528 00000000 00000000 00003fff dea0: cf360500 c03f4cdc c06cc1f4 cf360000 c0785a58 c0d27808 c07d55ec c0785a58 dec0: c031f0e0 c07d55ec c0776900 000000bb 00000000 c032040c c03203f4 c031ef0c dee0: c0785a58 c07d55ec c0785a8c c031f0e0 c075e670 c031f0c8 cf02deb8 c0785a58 df00: c07d55ec c031f174 c07d55ec 00000000 cf02df18 c031d7a0 cf01d4a8 cf068b10 df20: 00000000 c07d55ec c07c74d0 cf34bcc0 00000000 c031ded8 c0672340 c054cd38 df40: 00000000 c07e68c0 c07d55ec 00000000 00000000 c075e670 c0776900 000000bb df60: 00000000 c031f770 c07e68c0 00000007 c07e68c0 00000000 c075e670 c0008790 df80: 000000bb 00000006 00000006 c066e650 cf02dfa4 c07689b8 c07689b8 00000007 dfa0: c07e68c0 c073f2e8 c07689c0 000000bb 00000000 c073f2bc 00000006 00000006 dfc0: c073f2e8 00000000 c077649c c077649c c00150cc 00000013 00000000 00000000 dfe0: 00000000 c073f3cc cf02dfe8 00000000 c073f368 c00150cc 00000000 00000000 [<c03c0964>] (media_entity_create_link+0xe4/0xf4) from [<c03f3b30>] (isp_register_entities+0x228/0x2f4) [<c03f3b30>] (isp_register_entities+0x228/0x2f4) from [<c03f4cdc>] (isp_probe+0x7ac/0x9b8) [<c03f4cdc>] (isp_probe+0x7ac/0x9b8) from [<c032040c>] (platform_drv_probe+0x18/0x1c) [<c032040c>] (platform_drv_probe+0x18/0x1c) from [<c031ef0c>] (really_probe+0x64/0x1d8) [<c031ef0c>] (really_probe+0x64/0x1d8) from [<c031f0c8>] (driver_probe_device+0x48/0x60) [<c031f0c8>] (driver_probe_device+0x48/0x60) from [<c031f174>] (__driver_attach+0x94/0x98) [<c031f174>] (__driver_attach+0x94/0x98) from [<c031d7a0>] (bus_for_each_dev+0x54/0x80) [<c031d7a0>] (bus_for_each_dev+0x54/0x80) from [<c031ded8>] (bus_add_driver+0xac/0x2a8) [<c031ded8>] (bus_add_driver+0xac/0x2a8) from [<c031f770>] (driver_register+0x78/0x180) [<c031f770>] (driver_register+0x78/0x180) from [<c0008790>] (do_one_initcall+0x34/0x184) [<c0008790>] (do_one_initcall+0x34/0x184) from [<c073f2bc>] (do_basic_setup+0x9c/0xc8) [<c073f2bc>] (do_basic_setup+0x9c/0xc8) from [<c073f3cc>] (kernel_init+0x64/0xec) [<c073f3cc>] (kernel_init+0x64/0xec) from [<c00150cc>] (kernel_thread_exit+0x0/0x8) Code: e1c812b6 e8bd87f0 e7f001f2 eafffffe (e7f001f2) ---[ end trace 3ed3c618b26ff3e8 ]--- Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b This patch fixes the tvp5150_read() function to return an error in case the I2C transaction fails. tvp5150_probe() and other relevant driver callbacks changed to check the status of the I2C read operations. In case of a read error throw an error message with v4l2_err() instead of v4l2_dbg(). [mchehab@redhat.com: Fix a small typo breaking compilation] Signed-off-by: Dmitry Lifshitz <lifshitz@compulab.co.il> Signed-off-by: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-06-13 10:49:30 +00:00
tvp5150_id[2], tvp5150_id[3]);
v4l2_info(sd, "*** Rom ver is %d.%d\n",
tvp5150_id[2], tvp5150_id[3]);
}
}
core->norm = V4L2_STD_ALL; /* Default is autodetect */
core->input = TVP5150_COMPOSITE1;
core->enable = 1;
v4l2_ctrl_handler_init(&core->hdl, 4);
v4l2_ctrl_new_std(&core->hdl, &tvp5150_ctrl_ops,
V4L2_CID_BRIGHTNESS, 0, 255, 1, 128);
v4l2_ctrl_new_std(&core->hdl, &tvp5150_ctrl_ops,
V4L2_CID_CONTRAST, 0, 255, 1, 128);
v4l2_ctrl_new_std(&core->hdl, &tvp5150_ctrl_ops,
V4L2_CID_SATURATION, 0, 255, 1, 128);
v4l2_ctrl_new_std(&core->hdl, &tvp5150_ctrl_ops,
V4L2_CID_HUE, -128, 127, 1, 0);
sd->ctrl_handler = &core->hdl;
if (core->hdl.error) {
[media] tvp5150: fix kernel crash if chip is unavailable tvp5150 driver probe function doesn't check if the chip is present. Thus the driver can be loaded without having a device. This is dangerous and can cause kernel crash like this: Kernel BUG at c03c0964 [verbose debug info unavailable] Internal error: Oops - BUG: 0 [#1] PREEMPT ARM Modules linked in: CPU: 0 Tainted: G W (3.4.0-cm-t3730+ #2) PC is at media_entity_create_link+0xe4/0xf4 LR is at isp_register_entities+0x228/0x2f4 pc : [<c03c0964>] lr : [<c03f3b30>] psr: 60000013 sp : cf02de50 ip : 00000000 fp : c079405c r10: 00000000 r9 : 00000000 r8 : cf33c800 r7 : c0794834 r6 : 00000000 r5 : 00000000 r4 : cf365b48 r3 : 00000000 r2 : cf365b48 r1 : 00000000 r0 : cf33c800 Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment kernel Control: 10c5387d Table: 80004019 DAC: 00000015 Process swapper (pid: 1, stack limit = 0xcf02c2f0) Stack: (0xcf02de50 to 0xcf02e000) de40: cf360000 cf366f28 cf366218 c0794834 de60: cf365b48 00000000 cf33c800 c03f3b30 00000000 00000000 cf360890 cf3668a0 de80: 00000003 cf360000 c0785a58 00000000 cf360528 00000000 00000000 00003fff dea0: cf360500 c03f4cdc c06cc1f4 cf360000 c0785a58 c0d27808 c07d55ec c0785a58 dec0: c031f0e0 c07d55ec c0776900 000000bb 00000000 c032040c c03203f4 c031ef0c dee0: c0785a58 c07d55ec c0785a8c c031f0e0 c075e670 c031f0c8 cf02deb8 c0785a58 df00: c07d55ec c031f174 c07d55ec 00000000 cf02df18 c031d7a0 cf01d4a8 cf068b10 df20: 00000000 c07d55ec c07c74d0 cf34bcc0 00000000 c031ded8 c0672340 c054cd38 df40: 00000000 c07e68c0 c07d55ec 00000000 00000000 c075e670 c0776900 000000bb df60: 00000000 c031f770 c07e68c0 00000007 c07e68c0 00000000 c075e670 c0008790 df80: 000000bb 00000006 00000006 c066e650 cf02dfa4 c07689b8 c07689b8 00000007 dfa0: c07e68c0 c073f2e8 c07689c0 000000bb 00000000 c073f2bc 00000006 00000006 dfc0: c073f2e8 00000000 c077649c c077649c c00150cc 00000013 00000000 00000000 dfe0: 00000000 c073f3cc cf02dfe8 00000000 c073f368 c00150cc 00000000 00000000 [<c03c0964>] (media_entity_create_link+0xe4/0xf4) from [<c03f3b30>] (isp_register_entities+0x228/0x2f4) [<c03f3b30>] (isp_register_entities+0x228/0x2f4) from [<c03f4cdc>] (isp_probe+0x7ac/0x9b8) [<c03f4cdc>] (isp_probe+0x7ac/0x9b8) from [<c032040c>] (platform_drv_probe+0x18/0x1c) [<c032040c>] (platform_drv_probe+0x18/0x1c) from [<c031ef0c>] (really_probe+0x64/0x1d8) [<c031ef0c>] (really_probe+0x64/0x1d8) from [<c031f0c8>] (driver_probe_device+0x48/0x60) [<c031f0c8>] (driver_probe_device+0x48/0x60) from [<c031f174>] (__driver_attach+0x94/0x98) [<c031f174>] (__driver_attach+0x94/0x98) from [<c031d7a0>] (bus_for_each_dev+0x54/0x80) [<c031d7a0>] (bus_for_each_dev+0x54/0x80) from [<c031ded8>] (bus_add_driver+0xac/0x2a8) [<c031ded8>] (bus_add_driver+0xac/0x2a8) from [<c031f770>] (driver_register+0x78/0x180) [<c031f770>] (driver_register+0x78/0x180) from [<c0008790>] (do_one_initcall+0x34/0x184) [<c0008790>] (do_one_initcall+0x34/0x184) from [<c073f2bc>] (do_basic_setup+0x9c/0xc8) [<c073f2bc>] (do_basic_setup+0x9c/0xc8) from [<c073f3cc>] (kernel_init+0x64/0xec) [<c073f3cc>] (kernel_init+0x64/0xec) from [<c00150cc>] (kernel_thread_exit+0x0/0x8) Code: e1c812b6 e8bd87f0 e7f001f2 eafffffe (e7f001f2) ---[ end trace 3ed3c618b26ff3e8 ]--- Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b This patch fixes the tvp5150_read() function to return an error in case the I2C transaction fails. tvp5150_probe() and other relevant driver callbacks changed to check the status of the I2C read operations. In case of a read error throw an error message with v4l2_err() instead of v4l2_dbg(). [mchehab@redhat.com: Fix a small typo breaking compilation] Signed-off-by: Dmitry Lifshitz <lifshitz@compulab.co.il> Signed-off-by: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-06-13 10:49:30 +00:00
res = core->hdl.error;
v4l2_ctrl_handler_free(&core->hdl);
return res;
}
v4l2_ctrl_handler_setup(&core->hdl);
/* Default is no cropping */
core->rect.top = 0;
if (tvp5150_read_std(sd) & V4L2_STD_525_60)
core->rect.height = TVP5150_V_MAX_525_60;
else
core->rect.height = TVP5150_V_MAX_OTHERS;
core->rect.left = 0;
core->rect.width = TVP5150_H_MAX;
if (debug > 1)
tvp5150_log_status(sd);
return 0;
}
static int tvp5150_remove(struct i2c_client *c)
{
struct v4l2_subdev *sd = i2c_get_clientdata(c);
struct tvp5150 *decoder = to_tvp5150(sd);
v4l2_dbg(1, debug, sd,
"tvp5150.c: removing tvp5150 adapter on address 0x%x\n",
c->addr << 1);
v4l2_device_unregister_subdev(sd);
v4l2_ctrl_handler_free(&decoder->hdl);
return 0;
}
/* ----------------------------------------------------------------------- */
static const struct i2c_device_id tvp5150_id[] = {
{ "tvp5150", 0 },
{ }
};
MODULE_DEVICE_TABLE(i2c, tvp5150_id);
static struct i2c_driver tvp5150_driver = {
.driver = {
.owner = THIS_MODULE,
.name = "tvp5150",
},
.probe = tvp5150_probe,
.remove = tvp5150_remove,
.id_table = tvp5150_id,
};
module_i2c_driver(tvp5150_driver);