linux/fs/nfsd/nfsfh.c

757 lines
19 KiB
C
Raw Normal View History

License cleanup: add SPDX GPL-2.0 license identifier to files with no license Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 14:07:57 +00:00
// SPDX-License-Identifier: GPL-2.0
/*
* NFS server file handle treatment.
*
* Copyright (C) 1995, 1996 Olaf Kirch <okir@monad.swb.de>
* Portions Copyright (C) 1999 G. Allen Morris III <gam3@acm.org>
* Extensive rewrite by Neil Brown <neilb@cse.unsw.edu.au> Southern-Spring 1999
* ... and again Southern-Winter 2001 to support export_operations
*/
#include <linux/exportfs.h>
#include <linux/sunrpc/svcauth_gss.h>
#include "nfsd.h"
#include "vfs.h"
#include "auth.h"
#include "trace.h"
#define NFSDDBG_FACILITY NFSDDBG_FH
/*
* our acceptability function.
* if NOSUBTREECHECK, accept anything
* if not, require that we can walk up to exp->ex_dentry
* doing some checks on the 'x' bits
*/
static int nfsd_acceptable(void *expv, struct dentry *dentry)
{
struct svc_export *exp = expv;
int rv;
struct dentry *tdentry;
struct dentry *parent;
if (exp->ex_flags & NFSEXP_NOSUBTREECHECK)
return 1;
tdentry = dget(dentry);
while (tdentry != exp->ex_path.dentry && !IS_ROOT(tdentry)) {
/* make sure parents give x permission to user */
int err;
parent = dget_parent(tdentry);
err = inode_permission(&init_user_ns,
d_inode(parent), MAY_EXEC);
if (err < 0) {
dput(parent);
break;
}
dput(tdentry);
tdentry = parent;
}
if (tdentry != exp->ex_path.dentry)
dprintk("nfsd_acceptable failed at %p %pd\n", tdentry, tdentry);
rv = (tdentry == exp->ex_path.dentry);
dput(tdentry);
return rv;
}
/* Type check. The correct error return for type mismatches does not seem to be
* generally agreed upon. SunOS seems to use EISDIR if file isn't S_IFREG; a
* comment in the NFSv3 spec says this is incorrect (implementation notes for
* the write call).
*/
static inline __be32
nfsd_mode_check(struct svc_rqst *rqstp, struct dentry *dentry,
umode_t requested)
{
umode_t mode = d_inode(dentry)->i_mode & S_IFMT;
if (requested == 0) /* the caller doesn't care */
return nfs_ok;
if (mode == requested) {
if (mode == S_IFDIR && !d_can_lookup(dentry)) {
WARN_ON_ONCE(1);
return nfserr_notdir;
}
return nfs_ok;
}
/*
* v4 has an error more specific than err_notdir which we should
* return in preference to err_notdir:
*/
if (rqstp->rq_vers == 4 && mode == S_IFLNK)
return nfserr_symlink;
if (requested == S_IFDIR)
return nfserr_notdir;
if (mode == S_IFDIR)
return nfserr_isdir;
return nfserr_inval;
}
static bool nfsd_originating_port_ok(struct svc_rqst *rqstp, int flags)
{
if (flags & NFSEXP_INSECURE_PORT)
return true;
/* We don't require gss requests to use low ports: */
if (rqstp->rq_cred.cr_flavor >= RPC_AUTH_GSS)
return true;
return test_bit(RQ_SECURE, &rqstp->rq_flags);
}
static __be32 nfsd_setuser_and_check_port(struct svc_rqst *rqstp,
struct svc_export *exp)
{
int flags = nfsexp_flags(rqstp, exp);
/* Check if the request originated from a secure port. */
if (!nfsd_originating_port_ok(rqstp, flags)) {
RPC_IFDEBUG(char buf[RPC_MAX_ADDRBUFLEN]);
dprintk("nfsd: request from insecure port %s!\n",
svc_print_addr(rqstp, buf, sizeof(buf)));
return nfserr_perm;
}
/* Set user creds for this exportpoint */
return nfserrno(nfsd_setuser(rqstp, exp));
}
static inline __be32 check_pseudo_root(struct svc_rqst *rqstp,
struct dentry *dentry, struct svc_export *exp)
{
if (!(exp->ex_flags & NFSEXP_V4ROOT))
return nfs_ok;
/*
* v2/v3 clients have no need for the V4ROOT export--they use
* the mount protocl instead; also, further V4ROOT checks may be
* in v4-specific code, in which case v2/v3 clients could bypass
* them.
*/
if (!nfsd_v4client(rqstp))
return nfserr_stale;
/*
* We're exposing only the directories and symlinks that have to be
* traversed on the way to real exports:
*/
VFS: (Scripted) Convert S_ISLNK/DIR/REG(dentry->d_inode) to d_is_*(dentry) Convert the following where appropriate: (1) S_ISLNK(dentry->d_inode) to d_is_symlink(dentry). (2) S_ISREG(dentry->d_inode) to d_is_reg(dentry). (3) S_ISDIR(dentry->d_inode) to d_is_dir(dentry). This is actually more complicated than it appears as some calls should be converted to d_can_lookup() instead. The difference is whether the directory in question is a real dir with a ->lookup op or whether it's a fake dir with a ->d_automount op. In some circumstances, we can subsume checks for dentry->d_inode not being NULL into this, provided we the code isn't in a filesystem that expects d_inode to be NULL if the dirent really *is* negative (ie. if we're going to use d_inode() rather than d_backing_inode() to get the inode pointer). Note that the dentry type field may be set to something other than DCACHE_MISS_TYPE when d_inode is NULL in the case of unionmount, where the VFS manages the fall-through from a negative dentry to a lower layer. In such a case, the dentry type of the negative union dentry is set to the same as the type of the lower dentry. However, if you know d_inode is not NULL at the call site, then you can use the d_is_xxx() functions even in a filesystem. There is one further complication: a 0,0 chardev dentry may be labelled DCACHE_WHITEOUT_TYPE rather than DCACHE_SPECIAL_TYPE. Strictly, this was intended for special directory entry types that don't have attached inodes. The following perl+coccinelle script was used: use strict; my @callers; open($fd, 'git grep -l \'S_IS[A-Z].*->d_inode\' |') || die "Can't grep for S_ISDIR and co. callers"; @callers = <$fd>; close($fd); unless (@callers) { print "No matches\n"; exit(0); } my @cocci = ( '@@', 'expression E;', '@@', '', '- S_ISLNK(E->d_inode->i_mode)', '+ d_is_symlink(E)', '', '@@', 'expression E;', '@@', '', '- S_ISDIR(E->d_inode->i_mode)', '+ d_is_dir(E)', '', '@@', 'expression E;', '@@', '', '- S_ISREG(E->d_inode->i_mode)', '+ d_is_reg(E)' ); my $coccifile = "tmp.sp.cocci"; open($fd, ">$coccifile") || die $coccifile; print($fd "$_\n") || die $coccifile foreach (@cocci); close($fd); foreach my $file (@callers) { chomp $file; print "Processing ", $file, "\n"; system("spatch", "--sp-file", $coccifile, $file, "--in-place", "--no-show-diff") == 0 || die "spatch failed"; } [AV: overlayfs parts skipped] Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-01-29 12:02:35 +00:00
if (unlikely(!d_is_dir(dentry) &&
!d_is_symlink(dentry)))
return nfserr_stale;
/*
* A pseudoroot export gives permission to access only one
* single directory; the kernel has to make another upcall
* before granting access to anything else under it:
*/
if (unlikely(dentry != exp->ex_path.dentry))
return nfserr_stale;
return nfs_ok;
}
/*
* Use the given filehandle to look up the corresponding export and
* dentry. On success, the results are used to set fh_export and
* fh_dentry.
*/
static __be32 nfsd_set_fh_dentry(struct svc_rqst *rqstp, struct svc_fh *fhp)
{
struct knfsd_fh *fh = &fhp->fh_handle;
struct fid *fid = NULL;
struct svc_export *exp;
struct dentry *dentry;
int fileid_type;
int data_left = fh->fh_size/4;
int len;
__be32 error;
error = nfserr_stale;
if (rqstp->rq_vers > 2)
error = nfserr_badhandle;
if (rqstp->rq_vers == 4 && fh->fh_size == 0)
return nfserr_nofilehandle;
if (fh->fh_version != 1)
return error;
if (--data_left < 0)
return error;
if (fh->fh_auth_type != 0)
return error;
len = key_len(fh->fh_fsid_type) / 4;
if (len == 0)
return error;
if (fh->fh_fsid_type == FSID_MAJOR_MINOR) {
/* deprecated, convert to type 3 */
len = key_len(FSID_ENCODE_DEV)/4;
fh->fh_fsid_type = FSID_ENCODE_DEV;
/*
* struct knfsd_fh uses host-endian fields, which are
* sometimes used to hold net-endian values. This
* confuses sparse, so we must use __force here to
* keep it from complaining.
*/
fh->fh_fsid[0] = new_encode_dev(MKDEV(ntohl((__force __be32)fh->fh_fsid[0]),
ntohl((__force __be32)fh->fh_fsid[1])));
fh->fh_fsid[1] = fh->fh_fsid[2];
}
data_left -= len;
if (data_left < 0)
return error;
exp = rqst_exp_find(rqstp, fh->fh_fsid_type, fh->fh_fsid);
fid = (struct fid *)(fh->fh_fsid + len);
error = nfserr_stale;
if (IS_ERR(exp)) {
trace_nfsd_set_fh_dentry_badexport(rqstp, fhp, PTR_ERR(exp));
if (PTR_ERR(exp) == -ENOENT)
return error;
return nfserrno(PTR_ERR(exp));
}
if (exp->ex_flags & NFSEXP_NOSUBTREECHECK) {
/* Elevate privileges so that the lack of 'r' or 'x'
* permission on some parent directory will
* not stop exportfs_decode_fh from being able
* to reconnect a directory into the dentry cache.
* The same problem can affect "SUBTREECHECK" exports,
* but as nfsd_acceptable depends on correct
* access control settings being in effect, we cannot
* fix that case easily.
*/
CRED: Inaugurate COW credentials Inaugurate copy-on-write credentials management. This uses RCU to manage the credentials pointer in the task_struct with respect to accesses by other tasks. A process may only modify its own credentials, and so does not need locking to access or modify its own credentials. A mutex (cred_replace_mutex) is added to the task_struct to control the effect of PTRACE_ATTACHED on credential calculations, particularly with respect to execve(). With this patch, the contents of an active credentials struct may not be changed directly; rather a new set of credentials must be prepared, modified and committed using something like the following sequence of events: struct cred *new = prepare_creds(); int ret = blah(new); if (ret < 0) { abort_creds(new); return ret; } return commit_creds(new); There are some exceptions to this rule: the keyrings pointed to by the active credentials may be instantiated - keyrings violate the COW rule as managing COW keyrings is tricky, given that it is possible for a task to directly alter the keys in a keyring in use by another task. To help enforce this, various pointers to sets of credentials, such as those in the task_struct, are declared const. The purpose of this is compile-time discouragement of altering credentials through those pointers. Once a set of credentials has been made public through one of these pointers, it may not be modified, except under special circumstances: (1) Its reference count may incremented and decremented. (2) The keyrings to which it points may be modified, but not replaced. The only safe way to modify anything else is to create a replacement and commit using the functions described in Documentation/credentials.txt (which will be added by a later patch). This patch and the preceding patches have been tested with the LTP SELinux testsuite. This patch makes several logical sets of alteration: (1) execve(). This now prepares and commits credentials in various places in the security code rather than altering the current creds directly. (2) Temporary credential overrides. do_coredump() and sys_faccessat() now prepare their own credentials and temporarily override the ones currently on the acting thread, whilst preventing interference from other threads by holding cred_replace_mutex on the thread being dumped. This will be replaced in a future patch by something that hands down the credentials directly to the functions being called, rather than altering the task's objective credentials. (3) LSM interface. A number of functions have been changed, added or removed: (*) security_capset_check(), ->capset_check() (*) security_capset_set(), ->capset_set() Removed in favour of security_capset(). (*) security_capset(), ->capset() New. This is passed a pointer to the new creds, a pointer to the old creds and the proposed capability sets. It should fill in the new creds or return an error. All pointers, barring the pointer to the new creds, are now const. (*) security_bprm_apply_creds(), ->bprm_apply_creds() Changed; now returns a value, which will cause the process to be killed if it's an error. (*) security_task_alloc(), ->task_alloc_security() Removed in favour of security_prepare_creds(). (*) security_cred_free(), ->cred_free() New. Free security data attached to cred->security. (*) security_prepare_creds(), ->cred_prepare() New. Duplicate any security data attached to cred->security. (*) security_commit_creds(), ->cred_commit() New. Apply any security effects for the upcoming installation of new security by commit_creds(). (*) security_task_post_setuid(), ->task_post_setuid() Removed in favour of security_task_fix_setuid(). (*) security_task_fix_setuid(), ->task_fix_setuid() Fix up the proposed new credentials for setuid(). This is used by cap_set_fix_setuid() to implicitly adjust capabilities in line with setuid() changes. Changes are made to the new credentials, rather than the task itself as in security_task_post_setuid(). (*) security_task_reparent_to_init(), ->task_reparent_to_init() Removed. Instead the task being reparented to init is referred directly to init's credentials. NOTE! This results in the loss of some state: SELinux's osid no longer records the sid of the thread that forked it. (*) security_key_alloc(), ->key_alloc() (*) security_key_permission(), ->key_permission() Changed. These now take cred pointers rather than task pointers to refer to the security context. (4) sys_capset(). This has been simplified and uses less locking. The LSM functions it calls have been merged. (5) reparent_to_kthreadd(). This gives the current thread the same credentials as init by simply using commit_thread() to point that way. (6) __sigqueue_alloc() and switch_uid() __sigqueue_alloc() can't stop the target task from changing its creds beneath it, so this function gets a reference to the currently applicable user_struct which it then passes into the sigqueue struct it returns if successful. switch_uid() is now called from commit_creds(), and possibly should be folded into that. commit_creds() should take care of protecting __sigqueue_alloc(). (7) [sg]et[ug]id() and co and [sg]et_current_groups. The set functions now all use prepare_creds(), commit_creds() and abort_creds() to build and check a new set of credentials before applying it. security_task_set[ug]id() is called inside the prepared section. This guarantees that nothing else will affect the creds until we've finished. The calling of set_dumpable() has been moved into commit_creds(). Much of the functionality of set_user() has been moved into commit_creds(). The get functions all simply access the data directly. (8) security_task_prctl() and cap_task_prctl(). security_task_prctl() has been modified to return -ENOSYS if it doesn't want to handle a function, or otherwise return the return value directly rather than through an argument. Additionally, cap_task_prctl() now prepares a new set of credentials, even if it doesn't end up using it. (9) Keyrings. A number of changes have been made to the keyrings code: (a) switch_uid_keyring(), copy_keys(), exit_keys() and suid_keys() have all been dropped and built in to the credentials functions directly. They may want separating out again later. (b) key_alloc() and search_process_keyrings() now take a cred pointer rather than a task pointer to specify the security context. (c) copy_creds() gives a new thread within the same thread group a new thread keyring if its parent had one, otherwise it discards the thread keyring. (d) The authorisation key now points directly to the credentials to extend the search into rather pointing to the task that carries them. (e) Installing thread, process or session keyrings causes a new set of credentials to be created, even though it's not strictly necessary for process or session keyrings (they're shared). (10) Usermode helper. The usermode helper code now carries a cred struct pointer in its subprocess_info struct instead of a new session keyring pointer. This set of credentials is derived from init_cred and installed on the new process after it has been cloned. call_usermodehelper_setup() allocates the new credentials and call_usermodehelper_freeinfo() discards them if they haven't been used. A special cred function (prepare_usermodeinfo_creds()) is provided specifically for call_usermodehelper_setup() to call. call_usermodehelper_setkeys() adjusts the credentials to sport the supplied keyring as the new session keyring. (11) SELinux. SELinux has a number of changes, in addition to those to support the LSM interface changes mentioned above: (a) selinux_setprocattr() no longer does its check for whether the current ptracer can access processes with the new SID inside the lock that covers getting the ptracer's SID. Whilst this lock ensures that the check is done with the ptracer pinned, the result is only valid until the lock is released, so there's no point doing it inside the lock. (12) is_single_threaded(). This function has been extracted from selinux_setprocattr() and put into a file of its own in the lib/ directory as join_session_keyring() now wants to use it too. The code in SELinux just checked to see whether a task shared mm_structs with other tasks (CLONE_VM), but that isn't good enough. We really want to know if they're part of the same thread group (CLONE_THREAD). (13) nfsd. The NFS server daemon now has to use the COW credentials to set the credentials it is going to use. It really needs to pass the credentials down to the functions it calls, but it can't do that until other patches in this series have been applied. Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: James Morris <jmorris@namei.org> Signed-off-by: James Morris <jmorris@namei.org>
2008-11-13 23:39:23 +00:00
struct cred *new = prepare_creds();
if (!new) {
error = nfserrno(-ENOMEM);
goto out;
}
CRED: Inaugurate COW credentials Inaugurate copy-on-write credentials management. This uses RCU to manage the credentials pointer in the task_struct with respect to accesses by other tasks. A process may only modify its own credentials, and so does not need locking to access or modify its own credentials. A mutex (cred_replace_mutex) is added to the task_struct to control the effect of PTRACE_ATTACHED on credential calculations, particularly with respect to execve(). With this patch, the contents of an active credentials struct may not be changed directly; rather a new set of credentials must be prepared, modified and committed using something like the following sequence of events: struct cred *new = prepare_creds(); int ret = blah(new); if (ret < 0) { abort_creds(new); return ret; } return commit_creds(new); There are some exceptions to this rule: the keyrings pointed to by the active credentials may be instantiated - keyrings violate the COW rule as managing COW keyrings is tricky, given that it is possible for a task to directly alter the keys in a keyring in use by another task. To help enforce this, various pointers to sets of credentials, such as those in the task_struct, are declared const. The purpose of this is compile-time discouragement of altering credentials through those pointers. Once a set of credentials has been made public through one of these pointers, it may not be modified, except under special circumstances: (1) Its reference count may incremented and decremented. (2) The keyrings to which it points may be modified, but not replaced. The only safe way to modify anything else is to create a replacement and commit using the functions described in Documentation/credentials.txt (which will be added by a later patch). This patch and the preceding patches have been tested with the LTP SELinux testsuite. This patch makes several logical sets of alteration: (1) execve(). This now prepares and commits credentials in various places in the security code rather than altering the current creds directly. (2) Temporary credential overrides. do_coredump() and sys_faccessat() now prepare their own credentials and temporarily override the ones currently on the acting thread, whilst preventing interference from other threads by holding cred_replace_mutex on the thread being dumped. This will be replaced in a future patch by something that hands down the credentials directly to the functions being called, rather than altering the task's objective credentials. (3) LSM interface. A number of functions have been changed, added or removed: (*) security_capset_check(), ->capset_check() (*) security_capset_set(), ->capset_set() Removed in favour of security_capset(). (*) security_capset(), ->capset() New. This is passed a pointer to the new creds, a pointer to the old creds and the proposed capability sets. It should fill in the new creds or return an error. All pointers, barring the pointer to the new creds, are now const. (*) security_bprm_apply_creds(), ->bprm_apply_creds() Changed; now returns a value, which will cause the process to be killed if it's an error. (*) security_task_alloc(), ->task_alloc_security() Removed in favour of security_prepare_creds(). (*) security_cred_free(), ->cred_free() New. Free security data attached to cred->security. (*) security_prepare_creds(), ->cred_prepare() New. Duplicate any security data attached to cred->security. (*) security_commit_creds(), ->cred_commit() New. Apply any security effects for the upcoming installation of new security by commit_creds(). (*) security_task_post_setuid(), ->task_post_setuid() Removed in favour of security_task_fix_setuid(). (*) security_task_fix_setuid(), ->task_fix_setuid() Fix up the proposed new credentials for setuid(). This is used by cap_set_fix_setuid() to implicitly adjust capabilities in line with setuid() changes. Changes are made to the new credentials, rather than the task itself as in security_task_post_setuid(). (*) security_task_reparent_to_init(), ->task_reparent_to_init() Removed. Instead the task being reparented to init is referred directly to init's credentials. NOTE! This results in the loss of some state: SELinux's osid no longer records the sid of the thread that forked it. (*) security_key_alloc(), ->key_alloc() (*) security_key_permission(), ->key_permission() Changed. These now take cred pointers rather than task pointers to refer to the security context. (4) sys_capset(). This has been simplified and uses less locking. The LSM functions it calls have been merged. (5) reparent_to_kthreadd(). This gives the current thread the same credentials as init by simply using commit_thread() to point that way. (6) __sigqueue_alloc() and switch_uid() __sigqueue_alloc() can't stop the target task from changing its creds beneath it, so this function gets a reference to the currently applicable user_struct which it then passes into the sigqueue struct it returns if successful. switch_uid() is now called from commit_creds(), and possibly should be folded into that. commit_creds() should take care of protecting __sigqueue_alloc(). (7) [sg]et[ug]id() and co and [sg]et_current_groups. The set functions now all use prepare_creds(), commit_creds() and abort_creds() to build and check a new set of credentials before applying it. security_task_set[ug]id() is called inside the prepared section. This guarantees that nothing else will affect the creds until we've finished. The calling of set_dumpable() has been moved into commit_creds(). Much of the functionality of set_user() has been moved into commit_creds(). The get functions all simply access the data directly. (8) security_task_prctl() and cap_task_prctl(). security_task_prctl() has been modified to return -ENOSYS if it doesn't want to handle a function, or otherwise return the return value directly rather than through an argument. Additionally, cap_task_prctl() now prepares a new set of credentials, even if it doesn't end up using it. (9) Keyrings. A number of changes have been made to the keyrings code: (a) switch_uid_keyring(), copy_keys(), exit_keys() and suid_keys() have all been dropped and built in to the credentials functions directly. They may want separating out again later. (b) key_alloc() and search_process_keyrings() now take a cred pointer rather than a task pointer to specify the security context. (c) copy_creds() gives a new thread within the same thread group a new thread keyring if its parent had one, otherwise it discards the thread keyring. (d) The authorisation key now points directly to the credentials to extend the search into rather pointing to the task that carries them. (e) Installing thread, process or session keyrings causes a new set of credentials to be created, even though it's not strictly necessary for process or session keyrings (they're shared). (10) Usermode helper. The usermode helper code now carries a cred struct pointer in its subprocess_info struct instead of a new session keyring pointer. This set of credentials is derived from init_cred and installed on the new process after it has been cloned. call_usermodehelper_setup() allocates the new credentials and call_usermodehelper_freeinfo() discards them if they haven't been used. A special cred function (prepare_usermodeinfo_creds()) is provided specifically for call_usermodehelper_setup() to call. call_usermodehelper_setkeys() adjusts the credentials to sport the supplied keyring as the new session keyring. (11) SELinux. SELinux has a number of changes, in addition to those to support the LSM interface changes mentioned above: (a) selinux_setprocattr() no longer does its check for whether the current ptracer can access processes with the new SID inside the lock that covers getting the ptracer's SID. Whilst this lock ensures that the check is done with the ptracer pinned, the result is only valid until the lock is released, so there's no point doing it inside the lock. (12) is_single_threaded(). This function has been extracted from selinux_setprocattr() and put into a file of its own in the lib/ directory as join_session_keyring() now wants to use it too. The code in SELinux just checked to see whether a task shared mm_structs with other tasks (CLONE_VM), but that isn't good enough. We really want to know if they're part of the same thread group (CLONE_THREAD). (13) nfsd. The NFS server daemon now has to use the COW credentials to set the credentials it is going to use. It really needs to pass the credentials down to the functions it calls, but it can't do that until other patches in this series have been applied. Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: James Morris <jmorris@namei.org> Signed-off-by: James Morris <jmorris@namei.org>
2008-11-13 23:39:23 +00:00
new->cap_effective =
cap_raise_nfsd_set(new->cap_effective,
new->cap_permitted);
put_cred(override_creds(new));
put_cred(new);
} else {
error = nfsd_setuser_and_check_port(rqstp, exp);
if (error)
goto out;
}
/*
* Look up the dentry using the NFS file handle.
*/
error = nfserr_stale;
if (rqstp->rq_vers > 2)
error = nfserr_badhandle;
fileid_type = fh->fh_fileid_type;
if (fileid_type == FILEID_ROOT)
dentry = dget(exp->ex_path.dentry);
else {
dentry = exportfs_decode_fh_raw(exp->ex_path.mnt, fid,
data_left, fileid_type,
nfsd_acceptable, exp);
if (IS_ERR_OR_NULL(dentry)) {
trace_nfsd_set_fh_dentry_badhandle(rqstp, fhp,
dentry ? PTR_ERR(dentry) : -ESTALE);
switch (PTR_ERR(dentry)) {
case -ENOMEM:
case -ETIMEDOUT:
break;
default:
dentry = ERR_PTR(-ESTALE);
}
}
}
if (dentry == NULL)
goto out;
if (IS_ERR(dentry)) {
if (PTR_ERR(dentry) != -EINVAL)
error = nfserrno(PTR_ERR(dentry));
goto out;
}
VFS: (Scripted) Convert S_ISLNK/DIR/REG(dentry->d_inode) to d_is_*(dentry) Convert the following where appropriate: (1) S_ISLNK(dentry->d_inode) to d_is_symlink(dentry). (2) S_ISREG(dentry->d_inode) to d_is_reg(dentry). (3) S_ISDIR(dentry->d_inode) to d_is_dir(dentry). This is actually more complicated than it appears as some calls should be converted to d_can_lookup() instead. The difference is whether the directory in question is a real dir with a ->lookup op or whether it's a fake dir with a ->d_automount op. In some circumstances, we can subsume checks for dentry->d_inode not being NULL into this, provided we the code isn't in a filesystem that expects d_inode to be NULL if the dirent really *is* negative (ie. if we're going to use d_inode() rather than d_backing_inode() to get the inode pointer). Note that the dentry type field may be set to something other than DCACHE_MISS_TYPE when d_inode is NULL in the case of unionmount, where the VFS manages the fall-through from a negative dentry to a lower layer. In such a case, the dentry type of the negative union dentry is set to the same as the type of the lower dentry. However, if you know d_inode is not NULL at the call site, then you can use the d_is_xxx() functions even in a filesystem. There is one further complication: a 0,0 chardev dentry may be labelled DCACHE_WHITEOUT_TYPE rather than DCACHE_SPECIAL_TYPE. Strictly, this was intended for special directory entry types that don't have attached inodes. The following perl+coccinelle script was used: use strict; my @callers; open($fd, 'git grep -l \'S_IS[A-Z].*->d_inode\' |') || die "Can't grep for S_ISDIR and co. callers"; @callers = <$fd>; close($fd); unless (@callers) { print "No matches\n"; exit(0); } my @cocci = ( '@@', 'expression E;', '@@', '', '- S_ISLNK(E->d_inode->i_mode)', '+ d_is_symlink(E)', '', '@@', 'expression E;', '@@', '', '- S_ISDIR(E->d_inode->i_mode)', '+ d_is_dir(E)', '', '@@', 'expression E;', '@@', '', '- S_ISREG(E->d_inode->i_mode)', '+ d_is_reg(E)' ); my $coccifile = "tmp.sp.cocci"; open($fd, ">$coccifile") || die $coccifile; print($fd "$_\n") || die $coccifile foreach (@cocci); close($fd); foreach my $file (@callers) { chomp $file; print "Processing ", $file, "\n"; system("spatch", "--sp-file", $coccifile, $file, "--in-place", "--no-show-diff") == 0 || die "spatch failed"; } [AV: overlayfs parts skipped] Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-01-29 12:02:35 +00:00
if (d_is_dir(dentry) &&
(dentry->d_flags & DCACHE_DISCONNECTED)) {
printk("nfsd: find_fh_dentry returned a DISCONNECTED directory: %pd2\n",
dentry);
}
fhp->fh_dentry = dentry;
fhp->fh_export = exp;
nfsd: add a new EXPORT_OP_NOWCC flag to struct export_operations With NFSv3 nfsd will always attempt to send along WCC data to the client. This generally involves saving off the in-core inode information prior to doing the operation on the given filehandle, and then issuing a vfs_getattr to it after the op. Some filesystems (particularly clustered or networked ones) have an expensive ->getattr inode operation. Atomicity is also often difficult or impossible to guarantee on such filesystems. For those, we're best off not trying to provide WCC information to the client at all, and to simply allow it to poll for that information as needed with a GETATTR RPC. This patch adds a new flags field to struct export_operations, and defines a new EXPORT_OP_NOWCC flag that filesystems can use to indicate that nfsd should not attempt to provide WCC info in NFSv3 replies. It also adds a blurb about the new flags field and flag to the exporting documentation. The server will also now skip collecting this information for NFSv2 as well, since that info is never used there anyway. Note that this patch does not add this flag to any filesystem export_operations structures. This was originally developed to allow reexporting nfs via nfsd. Other filesystems may want to consider enabling this flag too. It's hard to tell however which ones have export operations to enable export via knfsd and which ones mostly rely on them for open-by-filehandle support, so I'm leaving that up to the individual maintainers to decide. I am cc'ing the relevant lists for those filesystems that I think may want to consider adding this though. Cc: HPDD-discuss@lists.01.org Cc: ceph-devel@vger.kernel.org Cc: cluster-devel@redhat.com Cc: fuse-devel@lists.sourceforge.net Cc: ocfs2-devel@oss.oracle.com Signed-off-by: Jeff Layton <jeff.layton@primarydata.com> Signed-off-by: Lance Shelton <lance.shelton@hammerspace.com> Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
2020-11-30 22:03:14 +00:00
switch (rqstp->rq_vers) {
case 4:
if (dentry->d_sb->s_export_op->flags & EXPORT_OP_NOATOMIC_ATTR)
fhp->fh_no_atomic_attr = true;
break;
nfsd: add a new EXPORT_OP_NOWCC flag to struct export_operations With NFSv3 nfsd will always attempt to send along WCC data to the client. This generally involves saving off the in-core inode information prior to doing the operation on the given filehandle, and then issuing a vfs_getattr to it after the op. Some filesystems (particularly clustered or networked ones) have an expensive ->getattr inode operation. Atomicity is also often difficult or impossible to guarantee on such filesystems. For those, we're best off not trying to provide WCC information to the client at all, and to simply allow it to poll for that information as needed with a GETATTR RPC. This patch adds a new flags field to struct export_operations, and defines a new EXPORT_OP_NOWCC flag that filesystems can use to indicate that nfsd should not attempt to provide WCC info in NFSv3 replies. It also adds a blurb about the new flags field and flag to the exporting documentation. The server will also now skip collecting this information for NFSv2 as well, since that info is never used there anyway. Note that this patch does not add this flag to any filesystem export_operations structures. This was originally developed to allow reexporting nfs via nfsd. Other filesystems may want to consider enabling this flag too. It's hard to tell however which ones have export operations to enable export via knfsd and which ones mostly rely on them for open-by-filehandle support, so I'm leaving that up to the individual maintainers to decide. I am cc'ing the relevant lists for those filesystems that I think may want to consider adding this though. Cc: HPDD-discuss@lists.01.org Cc: ceph-devel@vger.kernel.org Cc: cluster-devel@redhat.com Cc: fuse-devel@lists.sourceforge.net Cc: ocfs2-devel@oss.oracle.com Signed-off-by: Jeff Layton <jeff.layton@primarydata.com> Signed-off-by: Lance Shelton <lance.shelton@hammerspace.com> Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
2020-11-30 22:03:14 +00:00
case 3:
if (dentry->d_sb->s_export_op->flags & EXPORT_OP_NOWCC)
fhp->fh_no_wcc = true;
break;
case 2:
fhp->fh_no_wcc = true;
}
return 0;
out:
exp_put(exp);
return error;
}
/**
* fh_verify - filehandle lookup and access checking
* @rqstp: pointer to current rpc request
* @fhp: filehandle to be verified
* @type: expected type of object pointed to by filehandle
* @access: type of access needed to object
*
* Look up a dentry from the on-the-wire filehandle, check the client's
* access to the export, and set the current task's credentials.
*
* Regardless of success or failure of fh_verify(), fh_put() should be
* called on @fhp when the caller is finished with the filehandle.
*
* fh_verify() may be called multiple times on a given filehandle, for
* example, when processing an NFSv4 compound. The first call will look
* up a dentry using the on-the-wire filehandle. Subsequent calls will
* skip the lookup and just perform the other checks and possibly change
* the current task's credentials.
*
* @type specifies the type of object expected using one of the S_IF*
* constants defined in include/linux/stat.h. The caller may use zero
* to indicate that it doesn't care, or a negative integer to indicate
* that it expects something not of the given type.
*
* @access is formed from the NFSD_MAY_* constants defined in
* fs/nfsd/vfs.h.
*/
__be32
fh_verify(struct svc_rqst *rqstp, struct svc_fh *fhp, umode_t type, int access)
{
struct svc_export *exp = NULL;
struct dentry *dentry;
__be32 error;
if (!fhp->fh_dentry) {
error = nfsd_set_fh_dentry(rqstp, fhp);
if (error)
goto out;
}
dentry = fhp->fh_dentry;
exp = fhp->fh_export;
trace_nfsd_fh_verify(rqstp, fhp, type, access);
/*
* We still have to do all these permission checks, even when
* fh_dentry is already set:
* - fh_verify may be called multiple times with different
* "access" arguments (e.g. nfsd_proc_create calls
* fh_verify(...,NFSD_MAY_EXEC) first, then later (in
* nfsd_create) calls fh_verify(...,NFSD_MAY_CREATE).
* - in the NFSv4 case, the filehandle may have been filled
* in by fh_compose, and given a dentry, but further
* compound operations performed with that filehandle
* still need permissions checks. In the worst case, a
* mountpoint crossing may have changed the export
* options, and we may now need to use a different uid
* (for example, if different id-squashing options are in
* effect on the new filesystem).
*/
error = check_pseudo_root(rqstp, dentry, exp);
if (error)
goto out;
error = nfsd_setuser_and_check_port(rqstp, exp);
if (error)
goto out;
error = nfsd_mode_check(rqstp, dentry, type);
if (error)
goto out;
/*
* pseudoflavor restrictions are not enforced on NLM,
* which clients virtually always use auth_sys for,
* even while using RPCSEC_GSS for NFS.
*/
if (access & NFSD_MAY_LOCK || access & NFSD_MAY_BYPASS_GSS)
goto skip_pseudoflavor_check;
/*
* Clients may expect to be able to use auth_sys during mount,
* even if they use gss for everything else; see section 2.3.2
* of rfc 2623.
*/
if (access & NFSD_MAY_BYPASS_GSS_ON_ROOT
&& exp->ex_path.dentry == dentry)
goto skip_pseudoflavor_check;
error = check_nfsd_access(exp, rqstp);
if (error)
goto out;
skip_pseudoflavor_check:
/* Finally, check access permissions. */
error = nfsd_permission(rqstp, exp, dentry, access);
if (error) {
dprintk("fh_verify: %pd2 permission failure, "
"acc=%x, error=%d\n",
dentry,
access, ntohl(error));
}
out:
if (error == nfserr_stale)
nfsd_stats_fh_stale_inc(exp);
return error;
}
/*
* Compose a file handle for an NFS reply.
*
* Note that when first composed, the dentry may not yet have
* an inode. In this case a call to fh_update should be made
* before the fh goes out on the wire ...
*/
exportfs: add fid type This patchset is a medium scale rewrite of the export operations interface. The goal is to make the interface less complex, and easier to understand from the filesystem side, aswell as preparing generic support for exporting of 64bit inode numbers. This touches all nfs exporting filesystems, and I've done testing on all of the filesystems I have here locally (xfs, ext2, ext3, reiserfs, jfs) This patch: Add a structured fid type so that we don't have to pass an array of u32 values around everywhere. It's a union of possible layouts. As a start there's only the u32 array and the traditional 32bit inode format, but there will be more in one of my next patchset when I start to document the various filehandle formats we have in lowlevel filesystems better. Also add an enum that gives the various filehandle types human- readable names. Note: Some people might think the struct containing an anonymous union is ugly, but I didn't want to pass around a raw union type. Signed-off-by: Christoph Hellwig <hch@lst.de> Cc: Neil Brown <neilb@suse.de> Cc: "J. Bruce Fields" <bfields@fieldses.org> Cc: <linux-ext4@vger.kernel.org> Cc: Dave Kleikamp <shaggy@austin.ibm.com> Cc: Anton Altaparmakov <aia21@cantab.net> Cc: David Chinner <dgc@sgi.com> Cc: Timothy Shimmin <tes@sgi.com> Cc: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Cc: Hugh Dickins <hugh@veritas.com> Cc: Chris Mason <mason@suse.com> Cc: Jeff Mahoney <jeffm@suse.com> Cc: "Vladimir V. Saveliev" <vs@namesys.com> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Mark Fasheh <mark.fasheh@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-21 23:42:03 +00:00
static void _fh_update(struct svc_fh *fhp, struct svc_export *exp,
struct dentry *dentry)
{
if (dentry != exp->ex_path.dentry) {
exportfs: add fid type This patchset is a medium scale rewrite of the export operations interface. The goal is to make the interface less complex, and easier to understand from the filesystem side, aswell as preparing generic support for exporting of 64bit inode numbers. This touches all nfs exporting filesystems, and I've done testing on all of the filesystems I have here locally (xfs, ext2, ext3, reiserfs, jfs) This patch: Add a structured fid type so that we don't have to pass an array of u32 values around everywhere. It's a union of possible layouts. As a start there's only the u32 array and the traditional 32bit inode format, but there will be more in one of my next patchset when I start to document the various filehandle formats we have in lowlevel filesystems better. Also add an enum that gives the various filehandle types human- readable names. Note: Some people might think the struct containing an anonymous union is ugly, but I didn't want to pass around a raw union type. Signed-off-by: Christoph Hellwig <hch@lst.de> Cc: Neil Brown <neilb@suse.de> Cc: "J. Bruce Fields" <bfields@fieldses.org> Cc: <linux-ext4@vger.kernel.org> Cc: Dave Kleikamp <shaggy@austin.ibm.com> Cc: Anton Altaparmakov <aia21@cantab.net> Cc: David Chinner <dgc@sgi.com> Cc: Timothy Shimmin <tes@sgi.com> Cc: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Cc: Hugh Dickins <hugh@veritas.com> Cc: Chris Mason <mason@suse.com> Cc: Jeff Mahoney <jeffm@suse.com> Cc: "Vladimir V. Saveliev" <vs@namesys.com> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Mark Fasheh <mark.fasheh@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-21 23:42:03 +00:00
struct fid *fid = (struct fid *)
(fhp->fh_handle.fh_fsid + fhp->fh_handle.fh_size/4 - 1);
exportfs: add fid type This patchset is a medium scale rewrite of the export operations interface. The goal is to make the interface less complex, and easier to understand from the filesystem side, aswell as preparing generic support for exporting of 64bit inode numbers. This touches all nfs exporting filesystems, and I've done testing on all of the filesystems I have here locally (xfs, ext2, ext3, reiserfs, jfs) This patch: Add a structured fid type so that we don't have to pass an array of u32 values around everywhere. It's a union of possible layouts. As a start there's only the u32 array and the traditional 32bit inode format, but there will be more in one of my next patchset when I start to document the various filehandle formats we have in lowlevel filesystems better. Also add an enum that gives the various filehandle types human- readable names. Note: Some people might think the struct containing an anonymous union is ugly, but I didn't want to pass around a raw union type. Signed-off-by: Christoph Hellwig <hch@lst.de> Cc: Neil Brown <neilb@suse.de> Cc: "J. Bruce Fields" <bfields@fieldses.org> Cc: <linux-ext4@vger.kernel.org> Cc: Dave Kleikamp <shaggy@austin.ibm.com> Cc: Anton Altaparmakov <aia21@cantab.net> Cc: David Chinner <dgc@sgi.com> Cc: Timothy Shimmin <tes@sgi.com> Cc: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Cc: Hugh Dickins <hugh@veritas.com> Cc: Chris Mason <mason@suse.com> Cc: Jeff Mahoney <jeffm@suse.com> Cc: "Vladimir V. Saveliev" <vs@namesys.com> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Mark Fasheh <mark.fasheh@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-21 23:42:03 +00:00
int maxsize = (fhp->fh_maxsize - fhp->fh_handle.fh_size)/4;
int subtreecheck = !(exp->ex_flags & NFSEXP_NOSUBTREECHECK);
exportfs: add fid type This patchset is a medium scale rewrite of the export operations interface. The goal is to make the interface less complex, and easier to understand from the filesystem side, aswell as preparing generic support for exporting of 64bit inode numbers. This touches all nfs exporting filesystems, and I've done testing on all of the filesystems I have here locally (xfs, ext2, ext3, reiserfs, jfs) This patch: Add a structured fid type so that we don't have to pass an array of u32 values around everywhere. It's a union of possible layouts. As a start there's only the u32 array and the traditional 32bit inode format, but there will be more in one of my next patchset when I start to document the various filehandle formats we have in lowlevel filesystems better. Also add an enum that gives the various filehandle types human- readable names. Note: Some people might think the struct containing an anonymous union is ugly, but I didn't want to pass around a raw union type. Signed-off-by: Christoph Hellwig <hch@lst.de> Cc: Neil Brown <neilb@suse.de> Cc: "J. Bruce Fields" <bfields@fieldses.org> Cc: <linux-ext4@vger.kernel.org> Cc: Dave Kleikamp <shaggy@austin.ibm.com> Cc: Anton Altaparmakov <aia21@cantab.net> Cc: David Chinner <dgc@sgi.com> Cc: Timothy Shimmin <tes@sgi.com> Cc: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Cc: Hugh Dickins <hugh@veritas.com> Cc: Chris Mason <mason@suse.com> Cc: Jeff Mahoney <jeffm@suse.com> Cc: "Vladimir V. Saveliev" <vs@namesys.com> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Mark Fasheh <mark.fasheh@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-21 23:42:03 +00:00
fhp->fh_handle.fh_fileid_type =
exportfs_encode_fh(dentry, fid, &maxsize, subtreecheck);
fhp->fh_handle.fh_size += maxsize * 4;
} else {
fhp->fh_handle.fh_fileid_type = FILEID_ROOT;
}
}
static bool is_root_export(struct svc_export *exp)
{
return exp->ex_path.dentry == exp->ex_path.dentry->d_sb->s_root;
}
static struct super_block *exp_sb(struct svc_export *exp)
{
return exp->ex_path.dentry->d_sb;
}
static bool fsid_type_ok_for_exp(u8 fsid_type, struct svc_export *exp)
{
switch (fsid_type) {
case FSID_DEV:
if (!old_valid_dev(exp_sb(exp)->s_dev))
return false;
fallthrough;
case FSID_MAJOR_MINOR:
case FSID_ENCODE_DEV:
return exp_sb(exp)->s_type->fs_flags & FS_REQUIRES_DEV;
case FSID_NUM:
return exp->ex_flags & NFSEXP_FSID;
case FSID_UUID8:
case FSID_UUID16:
if (!is_root_export(exp))
return false;
fallthrough;
case FSID_UUID4_INUM:
case FSID_UUID16_INUM:
return exp->ex_uuid != NULL;
}
return true;
}
static void set_version_and_fsid_type(struct svc_fh *fhp, struct svc_export *exp, struct svc_fh *ref_fh)
{
u8 version;
u8 fsid_type;
retry:
version = 1;
if (ref_fh && ref_fh->fh_export == exp) {
version = ref_fh->fh_handle.fh_version;
fsid_type = ref_fh->fh_handle.fh_fsid_type;
ref_fh = NULL;
switch (version) {
case 0xca:
fsid_type = FSID_DEV;
break;
case 1:
break;
default:
goto retry;
}
/*
* As the fsid -> filesystem mapping was guided by
* user-space, there is no guarantee that the filesystem
* actually supports that fsid type. If it doesn't we
* loop around again without ref_fh set.
*/
if (!fsid_type_ok_for_exp(fsid_type, exp))
goto retry;
} else if (exp->ex_flags & NFSEXP_FSID) {
fsid_type = FSID_NUM;
} else if (exp->ex_uuid) {
if (fhp->fh_maxsize >= 64) {
if (is_root_export(exp))
fsid_type = FSID_UUID16;
else
fsid_type = FSID_UUID16_INUM;
} else {
if (is_root_export(exp))
fsid_type = FSID_UUID8;
else
fsid_type = FSID_UUID4_INUM;
}
} else if (!old_valid_dev(exp_sb(exp)->s_dev))
/* for newer device numbers, we must use a newer fsid format */
fsid_type = FSID_ENCODE_DEV;
else
fsid_type = FSID_DEV;
fhp->fh_handle.fh_version = version;
if (version)
fhp->fh_handle.fh_fsid_type = fsid_type;
}
__be32
fh_compose(struct svc_fh *fhp, struct svc_export *exp, struct dentry *dentry,
struct svc_fh *ref_fh)
{
/* ref_fh is a reference file handle.
* if it is non-null and for the same filesystem, then we should compose
* a filehandle which is of the same version, where possible.
*/
struct inode * inode = d_inode(dentry);
dev_t ex_dev = exp_sb(exp)->s_dev;
dprintk("nfsd: fh_compose(exp %02x:%02x/%ld %pd2, ino=%ld)\n",
MAJOR(ex_dev), MINOR(ex_dev),
(long) d_inode(exp->ex_path.dentry)->i_ino,
dentry,
(inode ? inode->i_ino : 0));
/* Choose filehandle version and fsid type based on
* the reference filehandle (if it is in the same export)
* or the export options.
*/
set_version_and_fsid_type(fhp, exp, ref_fh);
nfsd: add a new EXPORT_OP_NOWCC flag to struct export_operations With NFSv3 nfsd will always attempt to send along WCC data to the client. This generally involves saving off the in-core inode information prior to doing the operation on the given filehandle, and then issuing a vfs_getattr to it after the op. Some filesystems (particularly clustered or networked ones) have an expensive ->getattr inode operation. Atomicity is also often difficult or impossible to guarantee on such filesystems. For those, we're best off not trying to provide WCC information to the client at all, and to simply allow it to poll for that information as needed with a GETATTR RPC. This patch adds a new flags field to struct export_operations, and defines a new EXPORT_OP_NOWCC flag that filesystems can use to indicate that nfsd should not attempt to provide WCC info in NFSv3 replies. It also adds a blurb about the new flags field and flag to the exporting documentation. The server will also now skip collecting this information for NFSv2 as well, since that info is never used there anyway. Note that this patch does not add this flag to any filesystem export_operations structures. This was originally developed to allow reexporting nfs via nfsd. Other filesystems may want to consider enabling this flag too. It's hard to tell however which ones have export operations to enable export via knfsd and which ones mostly rely on them for open-by-filehandle support, so I'm leaving that up to the individual maintainers to decide. I am cc'ing the relevant lists for those filesystems that I think may want to consider adding this though. Cc: HPDD-discuss@lists.01.org Cc: ceph-devel@vger.kernel.org Cc: cluster-devel@redhat.com Cc: fuse-devel@lists.sourceforge.net Cc: ocfs2-devel@oss.oracle.com Signed-off-by: Jeff Layton <jeff.layton@primarydata.com> Signed-off-by: Lance Shelton <lance.shelton@hammerspace.com> Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
2020-11-30 22:03:14 +00:00
/* If we have a ref_fh, then copy the fh_no_wcc setting from it. */
fhp->fh_no_wcc = ref_fh ? ref_fh->fh_no_wcc : false;
if (ref_fh == fhp)
fh_put(ref_fh);
if (fhp->fh_dentry) {
printk(KERN_ERR "fh_compose: fh %pd2 not initialized!\n",
dentry);
}
if (fhp->fh_maxsize < NFS_FHSIZE)
printk(KERN_ERR "fh_compose: called with maxsize %d! %pd2\n",
fhp->fh_maxsize,
dentry);
fhp->fh_dentry = dget(dentry); /* our internal copy */
fhp->fh_export = exp_get(exp);
fhp->fh_handle.fh_size =
key_len(fhp->fh_handle.fh_fsid_type) + 4;
fhp->fh_handle.fh_auth_type = 0;
mk_fsid(fhp->fh_handle.fh_fsid_type,
fhp->fh_handle.fh_fsid,
ex_dev,
d_inode(exp->ex_path.dentry)->i_ino,
exp->ex_fsid, exp->ex_uuid);
if (inode)
_fh_update(fhp, exp, dentry);
if (fhp->fh_handle.fh_fileid_type == FILEID_INVALID) {
fh_put(fhp);
return nfserr_opnotsupp;
}
return 0;
}
/*
* Update file handle information after changing a dentry.
* This is only called by nfsd_create, nfsd_create_v3 and nfsd_proc_create
*/
__be32
fh_update(struct svc_fh *fhp)
{
struct dentry *dentry;
if (!fhp->fh_dentry)
goto out_bad;
dentry = fhp->fh_dentry;
if (d_really_is_negative(dentry))
goto out_negative;
if (fhp->fh_handle.fh_fileid_type != FILEID_ROOT)
return 0;
exportfs: add fid type This patchset is a medium scale rewrite of the export operations interface. The goal is to make the interface less complex, and easier to understand from the filesystem side, aswell as preparing generic support for exporting of 64bit inode numbers. This touches all nfs exporting filesystems, and I've done testing on all of the filesystems I have here locally (xfs, ext2, ext3, reiserfs, jfs) This patch: Add a structured fid type so that we don't have to pass an array of u32 values around everywhere. It's a union of possible layouts. As a start there's only the u32 array and the traditional 32bit inode format, but there will be more in one of my next patchset when I start to document the various filehandle formats we have in lowlevel filesystems better. Also add an enum that gives the various filehandle types human- readable names. Note: Some people might think the struct containing an anonymous union is ugly, but I didn't want to pass around a raw union type. Signed-off-by: Christoph Hellwig <hch@lst.de> Cc: Neil Brown <neilb@suse.de> Cc: "J. Bruce Fields" <bfields@fieldses.org> Cc: <linux-ext4@vger.kernel.org> Cc: Dave Kleikamp <shaggy@austin.ibm.com> Cc: Anton Altaparmakov <aia21@cantab.net> Cc: David Chinner <dgc@sgi.com> Cc: Timothy Shimmin <tes@sgi.com> Cc: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Cc: Hugh Dickins <hugh@veritas.com> Cc: Chris Mason <mason@suse.com> Cc: Jeff Mahoney <jeffm@suse.com> Cc: "Vladimir V. Saveliev" <vs@namesys.com> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Mark Fasheh <mark.fasheh@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-21 23:42:03 +00:00
_fh_update(fhp, fhp->fh_export, dentry);
if (fhp->fh_handle.fh_fileid_type == FILEID_INVALID)
return nfserr_opnotsupp;
return 0;
out_bad:
printk(KERN_ERR "fh_update: fh not verified!\n");
return nfserr_serverfault;
out_negative:
printk(KERN_ERR "fh_update: %pd2 still negative!\n",
dentry);
return nfserr_serverfault;
}
/**
* fh_fill_pre_attrs - Fill in pre-op attributes
* @fhp: file handle to be updated
*
*/
void fh_fill_pre_attrs(struct svc_fh *fhp)
{
bool v4 = (fhp->fh_maxsize == NFS4_FHSIZE);
struct inode *inode;
struct kstat stat;
__be32 err;
if (fhp->fh_no_wcc || fhp->fh_pre_saved)
return;
inode = d_inode(fhp->fh_dentry);
err = fh_getattr(fhp, &stat);
if (err) {
/* Grab the times from inode anyway */
stat.mtime = inode->i_mtime;
stat.ctime = inode->i_ctime;
stat.size = inode->i_size;
}
if (v4)
fhp->fh_pre_change = nfsd4_change_attribute(&stat, inode);
fhp->fh_pre_mtime = stat.mtime;
fhp->fh_pre_ctime = stat.ctime;
fhp->fh_pre_size = stat.size;
fhp->fh_pre_saved = true;
}
/**
* fh_fill_post_attrs - Fill in post-op attributes
* @fhp: file handle to be updated
*
*/
void fh_fill_post_attrs(struct svc_fh *fhp)
{
bool v4 = (fhp->fh_maxsize == NFS4_FHSIZE);
struct inode *inode = d_inode(fhp->fh_dentry);
__be32 err;
if (fhp->fh_no_wcc)
return;
if (fhp->fh_post_saved)
printk("nfsd: inode locked twice during operation.\n");
err = fh_getattr(fhp, &fhp->fh_post_attr);
if (err) {
fhp->fh_post_saved = false;
fhp->fh_post_attr.ctime = inode->i_ctime;
} else
fhp->fh_post_saved = true;
if (v4)
fhp->fh_post_change =
nfsd4_change_attribute(&fhp->fh_post_attr, inode);
}
/**
* fh_fill_both_attrs - Fill pre-op and post-op attributes
* @fhp: file handle to be updated
*
* This is used when the directory wasn't changed, but wcc attributes
* are needed anyway.
*/
void fh_fill_both_attrs(struct svc_fh *fhp)
{
fh_fill_post_attrs(fhp);
if (!fhp->fh_post_saved)
return;
fhp->fh_pre_change = fhp->fh_post_change;
fhp->fh_pre_mtime = fhp->fh_post_attr.mtime;
fhp->fh_pre_ctime = fhp->fh_post_attr.ctime;
fhp->fh_pre_size = fhp->fh_post_attr.size;
fhp->fh_pre_saved = true;
}
/*
* Release a file handle.
*/
void
fh_put(struct svc_fh *fhp)
{
struct dentry * dentry = fhp->fh_dentry;
struct svc_export * exp = fhp->fh_export;
if (dentry) {
fhp->fh_dentry = NULL;
dput(dentry);
fh_clear_pre_post_attrs(fhp);
}
fh_drop_write(fhp);
if (exp) {
exp_put(exp);
fhp->fh_export = NULL;
}
nfsd: add a new EXPORT_OP_NOWCC flag to struct export_operations With NFSv3 nfsd will always attempt to send along WCC data to the client. This generally involves saving off the in-core inode information prior to doing the operation on the given filehandle, and then issuing a vfs_getattr to it after the op. Some filesystems (particularly clustered or networked ones) have an expensive ->getattr inode operation. Atomicity is also often difficult or impossible to guarantee on such filesystems. For those, we're best off not trying to provide WCC information to the client at all, and to simply allow it to poll for that information as needed with a GETATTR RPC. This patch adds a new flags field to struct export_operations, and defines a new EXPORT_OP_NOWCC flag that filesystems can use to indicate that nfsd should not attempt to provide WCC info in NFSv3 replies. It also adds a blurb about the new flags field and flag to the exporting documentation. The server will also now skip collecting this information for NFSv2 as well, since that info is never used there anyway. Note that this patch does not add this flag to any filesystem export_operations structures. This was originally developed to allow reexporting nfs via nfsd. Other filesystems may want to consider enabling this flag too. It's hard to tell however which ones have export operations to enable export via knfsd and which ones mostly rely on them for open-by-filehandle support, so I'm leaving that up to the individual maintainers to decide. I am cc'ing the relevant lists for those filesystems that I think may want to consider adding this though. Cc: HPDD-discuss@lists.01.org Cc: ceph-devel@vger.kernel.org Cc: cluster-devel@redhat.com Cc: fuse-devel@lists.sourceforge.net Cc: ocfs2-devel@oss.oracle.com Signed-off-by: Jeff Layton <jeff.layton@primarydata.com> Signed-off-by: Lance Shelton <lance.shelton@hammerspace.com> Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
2020-11-30 22:03:14 +00:00
fhp->fh_no_wcc = false;
return;
}
/*
* Shorthand for dprintk()'s
*/
char * SVCFH_fmt(struct svc_fh *fhp)
{
struct knfsd_fh *fh = &fhp->fh_handle;
static char buf[2+1+1+64*3+1];
if (fh->fh_size < 0 || fh->fh_size> 64)
return "bad-fh";
sprintf(buf, "%d: %*ph", fh->fh_size, fh->fh_size, fh->fh_raw);
return buf;
}
enum fsid_source fsid_source(const struct svc_fh *fhp)
{
if (fhp->fh_handle.fh_version != 1)
return FSIDSOURCE_DEV;
switch(fhp->fh_handle.fh_fsid_type) {
case FSID_DEV:
case FSID_ENCODE_DEV:
case FSID_MAJOR_MINOR:
if (exp_sb(fhp->fh_export)->s_type->fs_flags & FS_REQUIRES_DEV)
return FSIDSOURCE_DEV;
break;
case FSID_NUM:
if (fhp->fh_export->ex_flags & NFSEXP_FSID)
return FSIDSOURCE_FSID;
break;
default:
break;
}
/* either a UUID type filehandle, or the filehandle doesn't
* match the export.
*/
if (fhp->fh_export->ex_flags & NFSEXP_FSID)
return FSIDSOURCE_FSID;
if (fhp->fh_export->ex_uuid)
return FSIDSOURCE_UUID;
return FSIDSOURCE_DEV;
}