2005-04-16 22:20:36 +00:00
|
|
|
/*
|
|
|
|
* sd.c Copyright (C) 1992 Drew Eckhardt
|
|
|
|
* Copyright (C) 1993, 1994, 1995, 1999 Eric Youngdale
|
|
|
|
*
|
|
|
|
* Linux scsi disk driver
|
|
|
|
* Initial versions: Drew Eckhardt
|
|
|
|
* Subsequent revisions: Eric Youngdale
|
|
|
|
* Modification history:
|
|
|
|
* - Drew Eckhardt <drew@colorado.edu> original
|
|
|
|
* - Eric Youngdale <eric@andante.org> add scatter-gather, multiple
|
|
|
|
* outstanding request, and other enhancements.
|
|
|
|
* Support loadable low-level scsi drivers.
|
|
|
|
* - Jirka Hanika <geo@ff.cuni.cz> support more scsi disks using
|
|
|
|
* eight major numbers.
|
|
|
|
* - Richard Gooch <rgooch@atnf.csiro.au> support devfs.
|
|
|
|
* - Torben Mathiasen <tmm@image.dk> Resource allocation fixes in
|
|
|
|
* sd_init and cleanups.
|
|
|
|
* - Alex Davis <letmein@erols.com> Fix problem where partition info
|
|
|
|
* not being read in sd_open. Fix problem where removable media
|
|
|
|
* could be ejected after sd_open.
|
|
|
|
* - Douglas Gilbert <dgilbert@interlog.com> cleanup for lk 2.5.x
|
|
|
|
* - Badari Pulavarty <pbadari@us.ibm.com>, Matthew Wilcox
|
|
|
|
* <willy@debian.org>, Kurt Garloff <garloff@suse.de>:
|
|
|
|
* Support 32k/1M disks.
|
|
|
|
*
|
|
|
|
* Logging policy (needs CONFIG_SCSI_LOGGING defined):
|
|
|
|
* - setting up transfer: SCSI_LOG_HLQUEUE levels 1 and 2
|
|
|
|
* - end of transfer (bh + scsi_lib): SCSI_LOG_HLCOMPLETE level 1
|
|
|
|
* - entering sd_ioctl: SCSI_LOG_IOCTL level 1
|
|
|
|
* - entering other commands: SCSI_LOG_HLQUEUE level 3
|
|
|
|
* Note: when the logging level is set by the user, it must be greater
|
|
|
|
* than the level indicated above to trigger output.
|
|
|
|
*/
|
|
|
|
|
|
|
|
#include <linux/module.h>
|
|
|
|
#include <linux/fs.h>
|
|
|
|
#include <linux/kernel.h>
|
|
|
|
#include <linux/mm.h>
|
|
|
|
#include <linux/bio.h>
|
|
|
|
#include <linux/genhd.h>
|
|
|
|
#include <linux/hdreg.h>
|
|
|
|
#include <linux/errno.h>
|
|
|
|
#include <linux/idr.h>
|
|
|
|
#include <linux/interrupt.h>
|
|
|
|
#include <linux/init.h>
|
|
|
|
#include <linux/blkdev.h>
|
|
|
|
#include <linux/blkpg.h>
|
|
|
|
#include <linux/delay.h>
|
2006-01-11 12:16:10 +00:00
|
|
|
#include <linux/mutex.h>
|
2008-08-31 15:41:52 +00:00
|
|
|
#include <linux/string_helpers.h>
|
2009-01-04 13:32:28 +00:00
|
|
|
#include <linux/async.h>
|
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files. percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.
percpu.h -> slab.h dependency is about to be removed. Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability. As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.
http://userweb.kernel.org/~tj/misc/slabh-sweep.py
The script does the followings.
* Scan files for gfp and slab usages and update includes such that
only the necessary includes are there. ie. if only gfp is used,
gfp.h, if slab is used, slab.h.
* When the script inserts a new include, it looks at the include
blocks and try to put the new include such that its order conforms
to its surrounding. It's put in the include block which contains
core kernel includes, in the same order that the rest are ordered -
alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
doesn't seem to be any matching order.
* If the script can't find a place to put a new include (mostly
because the file doesn't have fitting include block), it prints out
an error message indicating which .h file needs to be added to the
file.
The conversion was done in the following steps.
1. The initial automatic conversion of all .c files updated slightly
over 4000 files, deleting around 700 includes and adding ~480 gfp.h
and ~3000 slab.h inclusions. The script emitted errors for ~400
files.
2. Each error was manually checked. Some didn't need the inclusion,
some needed manual addition while adding it to implementation .h or
embedding .c file was more appropriate for others. This step added
inclusions to around 150 files.
3. The script was run again and the output was compared to the edits
from #2 to make sure no file was left behind.
4. Several build tests were done and a couple of problems were fixed.
e.g. lib/decompress_*.c used malloc/free() wrappers around slab
APIs requiring slab.h to be added manually.
5. The script was run on all .h files but without automatically
editing them as sprinkling gfp.h and slab.h inclusions around .h
files could easily lead to inclusion dependency hell. Most gfp.h
inclusion directives were ignored as stuff from gfp.h was usually
wildly available and often used in preprocessor macros. Each
slab.h inclusion directive was examined and added manually as
necessary.
6. percpu.h was updated not to include slab.h.
7. Build test were done on the following configurations and failures
were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my
distributed build env didn't work with gcov compiles) and a few
more options had to be turned off depending on archs to make things
build (like ipr on powerpc/64 which failed due to missing writeq).
* x86 and x86_64 UP and SMP allmodconfig and a custom test config.
* powerpc and powerpc64 SMP allmodconfig
* sparc and sparc64 SMP allmodconfig
* ia64 SMP allmodconfig
* s390 SMP allmodconfig
* alpha SMP allmodconfig
* um on x86_64 SMP allmodconfig
8. percpu.h modifications were reverted so that it could be applied as
a separate patch and serve as bisection point.
Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.
Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 08:04:11 +00:00
|
|
|
#include <linux/slab.h>
|
2011-12-05 01:20:26 +00:00
|
|
|
#include <linux/pm_runtime.h>
|
2015-10-15 12:10:49 +00:00
|
|
|
#include <linux/pr.h>
|
2005-04-16 22:20:36 +00:00
|
|
|
#include <asm/uaccess.h>
|
2009-04-21 23:43:27 +00:00
|
|
|
#include <asm/unaligned.h>
|
2005-04-16 22:20:36 +00:00
|
|
|
|
|
|
|
#include <scsi/scsi.h>
|
|
|
|
#include <scsi/scsi_cmnd.h>
|
|
|
|
#include <scsi/scsi_dbg.h>
|
|
|
|
#include <scsi/scsi_device.h>
|
|
|
|
#include <scsi/scsi_driver.h>
|
|
|
|
#include <scsi/scsi_eh.h>
|
|
|
|
#include <scsi/scsi_host.h>
|
|
|
|
#include <scsi/scsi_ioctl.h>
|
|
|
|
#include <scsi/scsicam.h>
|
|
|
|
|
2008-06-17 16:47:32 +00:00
|
|
|
#include "sd.h"
|
2012-03-23 00:05:11 +00:00
|
|
|
#include "scsi_priv.h"
|
2005-04-16 22:20:36 +00:00
|
|
|
#include "scsi_logging.h"
|
|
|
|
|
2006-03-08 08:14:20 +00:00
|
|
|
MODULE_AUTHOR("Eric Youngdale");
|
|
|
|
MODULE_DESCRIPTION("SCSI disk (sd) driver");
|
|
|
|
MODULE_LICENSE("GPL");
|
|
|
|
|
|
|
|
MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK0_MAJOR);
|
|
|
|
MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK1_MAJOR);
|
|
|
|
MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK2_MAJOR);
|
|
|
|
MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK3_MAJOR);
|
|
|
|
MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK4_MAJOR);
|
|
|
|
MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK5_MAJOR);
|
|
|
|
MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK6_MAJOR);
|
|
|
|
MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK7_MAJOR);
|
|
|
|
MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK8_MAJOR);
|
|
|
|
MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK9_MAJOR);
|
|
|
|
MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK10_MAJOR);
|
|
|
|
MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK11_MAJOR);
|
|
|
|
MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK12_MAJOR);
|
|
|
|
MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK13_MAJOR);
|
|
|
|
MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK14_MAJOR);
|
|
|
|
MODULE_ALIAS_BLOCKDEV_MAJOR(SCSI_DISK15_MAJOR);
|
[SCSI] modalias for scsi devices
The following patch adds support for sysfs/uevent modalias
attribute for scsi devices (like disks, tapes, cdroms etc),
based on whatever current sd.c, sr.c, st.c and osst.c drivers
supports.
The modalias format is like this:
scsi:type-0x04
(for TYPE_WORM, handled by sr.c now).
Several comments.
o This hexadecimal type value is because all TYPE_XXX constants
in include/scsi/scsi.h are given in hex, but __stringify() will
not convert them to decimal (so it will NOT be scsi:type-4).
Since it does not really matter in which format it is, while
both modalias in module and modalias attribute match each other,
I descided to go for that 0x%02x format (and added a comment in
include/scsi/scsi.h to keep them that way), instead of changing
them all to decimal.
o There was no .uevent routine for SCSI bus. It might be a good
idea to add some more ueven environment variables in there.
o osst.c driver handles tapes too, like st.c, but only SOME tapes.
With this setup, hotplug scripts (or whatever is used by the
user) will try to load both st and osst modules for all SCSI
tapes found, because both modules have scsi:type-0x01 alias).
It is not harmful, but one extra module is no good either.
It is possible to solve this, by exporting more info in
modalias attribute, including vendor and device identification
strings, so that modalias becomes something like
scsi:type-0x12:vendor-Adaptec LTD:device-OnStream Tape Drive
and having that, match for all 3 attributes, not only device
type. But oh well, vendor and device strings may be large,
and they do contain spaces and whatnot.
So I left them for now, awaiting for comments first.
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-10-27 12:02:37 +00:00
|
|
|
MODULE_ALIAS_SCSI_DEVICE(TYPE_DISK);
|
|
|
|
MODULE_ALIAS_SCSI_DEVICE(TYPE_MOD);
|
|
|
|
MODULE_ALIAS_SCSI_DEVICE(TYPE_RBC);
|
2006-03-08 08:14:20 +00:00
|
|
|
|
2008-08-25 10:47:25 +00:00
|
|
|
#if !defined(CONFIG_DEBUG_BLOCK_EXT_DEVT)
|
2008-08-25 10:47:24 +00:00
|
|
|
#define SD_MINORS 16
|
2008-08-25 10:47:25 +00:00
|
|
|
#else
|
2008-08-25 10:56:17 +00:00
|
|
|
#define SD_MINORS 0
|
2008-08-25 10:47:25 +00:00
|
|
|
#endif
|
|
|
|
|
2011-03-08 07:07:15 +00:00
|
|
|
static void sd_config_discard(struct scsi_disk *, unsigned int);
|
2012-09-18 16:19:32 +00:00
|
|
|
static void sd_config_write_same(struct scsi_disk *);
|
Revert "scsi: revert "[SCSI] Get rid of scsi_cmnd->done""
This reverts commit ac40532ef0b8649e6f7f83859ea0de1c4ed08a19, which gets
us back the original cleanup of 6f5391c283d7fdcf24bf40786ea79061919d1e1d.
It turns out that the bug that was triggered by that commit was
apparently not actually triggered by that commit at all, and just the
testing conditions had changed enough to make it appear to be due to it.
The real problem seems to have been found by Peter Osterlund:
"pktcdvd sets it [block device size] when opening the /dev/pktcdvd
device, but when the drive is later opened as /dev/scd0, there is
nothing that sets it back. (Btw, 40944 is possible if the disk is a
CDRW that was formatted with "cdrwtool -m 10236".)
The problem is that pktcdvd opens the cd device in non-blocking mode
when pktsetup is run, and doesn't close it again until pktsetup -d is
run. The effect is that if you meanwhile open the cd device,
blkdev.c:do_open() doesn't call bd_set_size() because
bdev->bd_openers is non-zero."
In particular, to repeat the bug (regardless of whether commit
6f5391c283d7fdcf24bf40786ea79061919d1e1d is applied or not):
" 1. Start with an empty drive.
2. pktsetup 0 /dev/scd0
3. Insert a CD containing an isofs filesystem.
4. mount /dev/pktcdvd/0 /mnt/tmp
5. umount /mnt/tmp
6. Press the eject button.
7. Insert a DVD containing a non-writable filesystem.
8. mount /dev/scd0 /mnt/tmp
9. find /mnt/tmp -type f -print0 | xargs -0 sha1sum >/dev/null
10. If the DVD contains data beyond the physical size of a CD, you
get I/O errors in the terminal, and dmesg reports lots of
"attempt to access beyond end of device" errors."
which in turn is because the nested open after the media change won't
cause the size to be set properly (because the original open still holds
the block device, and we only do the bd_set_size() when we don't have
other people holding the device open).
The proper fix for that is probably to just do something like
bdev->bd_inode->i_size = (loff_t)get_capacity(disk)<<9;
in fs/block_dev.c:do_open() even for the cases where we're not the
original opener (but *not* call bd_set_size(), since that will also
change the block size of the device).
Cc: Peter Osterlund <petero2@telia.com>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Matthew Wilcox <matthew@wil.cx>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-01-06 18:17:12 +00:00
|
|
|
static int sd_revalidate_disk(struct gendisk *);
|
2010-05-15 18:09:32 +00:00
|
|
|
static void sd_unlock_native_capacity(struct gendisk *disk);
|
Revert "scsi: revert "[SCSI] Get rid of scsi_cmnd->done""
This reverts commit ac40532ef0b8649e6f7f83859ea0de1c4ed08a19, which gets
us back the original cleanup of 6f5391c283d7fdcf24bf40786ea79061919d1e1d.
It turns out that the bug that was triggered by that commit was
apparently not actually triggered by that commit at all, and just the
testing conditions had changed enough to make it appear to be due to it.
The real problem seems to have been found by Peter Osterlund:
"pktcdvd sets it [block device size] when opening the /dev/pktcdvd
device, but when the drive is later opened as /dev/scd0, there is
nothing that sets it back. (Btw, 40944 is possible if the disk is a
CDRW that was formatted with "cdrwtool -m 10236".)
The problem is that pktcdvd opens the cd device in non-blocking mode
when pktsetup is run, and doesn't close it again until pktsetup -d is
run. The effect is that if you meanwhile open the cd device,
blkdev.c:do_open() doesn't call bd_set_size() because
bdev->bd_openers is non-zero."
In particular, to repeat the bug (regardless of whether commit
6f5391c283d7fdcf24bf40786ea79061919d1e1d is applied or not):
" 1. Start with an empty drive.
2. pktsetup 0 /dev/scd0
3. Insert a CD containing an isofs filesystem.
4. mount /dev/pktcdvd/0 /mnt/tmp
5. umount /mnt/tmp
6. Press the eject button.
7. Insert a DVD containing a non-writable filesystem.
8. mount /dev/scd0 /mnt/tmp
9. find /mnt/tmp -type f -print0 | xargs -0 sha1sum >/dev/null
10. If the DVD contains data beyond the physical size of a CD, you
get I/O errors in the terminal, and dmesg reports lots of
"attempt to access beyond end of device" errors."
which in turn is because the nested open after the media change won't
cause the size to be set properly (because the original open still holds
the block device, and we only do the bd_set_size() when we don't have
other people holding the device open).
The proper fix for that is probably to just do something like
bdev->bd_inode->i_size = (loff_t)get_capacity(disk)<<9;
in fs/block_dev.c:do_open() even for the cases where we're not the
original opener (but *not* call bd_set_size(), since that will also
change the block size of the device).
Cc: Peter Osterlund <petero2@telia.com>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Matthew Wilcox <matthew@wil.cx>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-01-06 18:17:12 +00:00
|
|
|
static int sd_probe(struct device *);
|
|
|
|
static int sd_remove(struct device *);
|
|
|
|
static void sd_shutdown(struct device *);
|
2013-09-16 11:28:15 +00:00
|
|
|
static int sd_suspend_system(struct device *);
|
|
|
|
static int sd_suspend_runtime(struct device *);
|
Revert "scsi: revert "[SCSI] Get rid of scsi_cmnd->done""
This reverts commit ac40532ef0b8649e6f7f83859ea0de1c4ed08a19, which gets
us back the original cleanup of 6f5391c283d7fdcf24bf40786ea79061919d1e1d.
It turns out that the bug that was triggered by that commit was
apparently not actually triggered by that commit at all, and just the
testing conditions had changed enough to make it appear to be due to it.
The real problem seems to have been found by Peter Osterlund:
"pktcdvd sets it [block device size] when opening the /dev/pktcdvd
device, but when the drive is later opened as /dev/scd0, there is
nothing that sets it back. (Btw, 40944 is possible if the disk is a
CDRW that was formatted with "cdrwtool -m 10236".)
The problem is that pktcdvd opens the cd device in non-blocking mode
when pktsetup is run, and doesn't close it again until pktsetup -d is
run. The effect is that if you meanwhile open the cd device,
blkdev.c:do_open() doesn't call bd_set_size() because
bdev->bd_openers is non-zero."
In particular, to repeat the bug (regardless of whether commit
6f5391c283d7fdcf24bf40786ea79061919d1e1d is applied or not):
" 1. Start with an empty drive.
2. pktsetup 0 /dev/scd0
3. Insert a CD containing an isofs filesystem.
4. mount /dev/pktcdvd/0 /mnt/tmp
5. umount /mnt/tmp
6. Press the eject button.
7. Insert a DVD containing a non-writable filesystem.
8. mount /dev/scd0 /mnt/tmp
9. find /mnt/tmp -type f -print0 | xargs -0 sha1sum >/dev/null
10. If the DVD contains data beyond the physical size of a CD, you
get I/O errors in the terminal, and dmesg reports lots of
"attempt to access beyond end of device" errors."
which in turn is because the nested open after the media change won't
cause the size to be set properly (because the original open still holds
the block device, and we only do the bd_set_size() when we don't have
other people holding the device open).
The proper fix for that is probably to just do something like
bdev->bd_inode->i_size = (loff_t)get_capacity(disk)<<9;
in fs/block_dev.c:do_open() even for the cases where we're not the
original opener (but *not* call bd_set_size(), since that will also
change the block size of the device).
Cc: Peter Osterlund <petero2@telia.com>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Matthew Wilcox <matthew@wil.cx>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-01-06 18:17:12 +00:00
|
|
|
static int sd_resume(struct device *);
|
|
|
|
static void sd_rescan(struct device *);
|
2014-05-01 14:51:04 +00:00
|
|
|
static int sd_init_command(struct scsi_cmnd *SCpnt);
|
|
|
|
static void sd_uninit_command(struct scsi_cmnd *SCpnt);
|
Revert "scsi: revert "[SCSI] Get rid of scsi_cmnd->done""
This reverts commit ac40532ef0b8649e6f7f83859ea0de1c4ed08a19, which gets
us back the original cleanup of 6f5391c283d7fdcf24bf40786ea79061919d1e1d.
It turns out that the bug that was triggered by that commit was
apparently not actually triggered by that commit at all, and just the
testing conditions had changed enough to make it appear to be due to it.
The real problem seems to have been found by Peter Osterlund:
"pktcdvd sets it [block device size] when opening the /dev/pktcdvd
device, but when the drive is later opened as /dev/scd0, there is
nothing that sets it back. (Btw, 40944 is possible if the disk is a
CDRW that was formatted with "cdrwtool -m 10236".)
The problem is that pktcdvd opens the cd device in non-blocking mode
when pktsetup is run, and doesn't close it again until pktsetup -d is
run. The effect is that if you meanwhile open the cd device,
blkdev.c:do_open() doesn't call bd_set_size() because
bdev->bd_openers is non-zero."
In particular, to repeat the bug (regardless of whether commit
6f5391c283d7fdcf24bf40786ea79061919d1e1d is applied or not):
" 1. Start with an empty drive.
2. pktsetup 0 /dev/scd0
3. Insert a CD containing an isofs filesystem.
4. mount /dev/pktcdvd/0 /mnt/tmp
5. umount /mnt/tmp
6. Press the eject button.
7. Insert a DVD containing a non-writable filesystem.
8. mount /dev/scd0 /mnt/tmp
9. find /mnt/tmp -type f -print0 | xargs -0 sha1sum >/dev/null
10. If the DVD contains data beyond the physical size of a CD, you
get I/O errors in the terminal, and dmesg reports lots of
"attempt to access beyond end of device" errors."
which in turn is because the nested open after the media change won't
cause the size to be set properly (because the original open still holds
the block device, and we only do the bd_set_size() when we don't have
other people holding the device open).
The proper fix for that is probably to just do something like
bdev->bd_inode->i_size = (loff_t)get_capacity(disk)<<9;
in fs/block_dev.c:do_open() even for the cases where we're not the
original opener (but *not* call bd_set_size(), since that will also
change the block size of the device).
Cc: Peter Osterlund <petero2@telia.com>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Matthew Wilcox <matthew@wil.cx>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-01-06 18:17:12 +00:00
|
|
|
static int sd_done(struct scsi_cmnd *);
|
2013-11-11 12:44:53 +00:00
|
|
|
static int sd_eh_action(struct scsi_cmnd *, int);
|
Revert "scsi: revert "[SCSI] Get rid of scsi_cmnd->done""
This reverts commit ac40532ef0b8649e6f7f83859ea0de1c4ed08a19, which gets
us back the original cleanup of 6f5391c283d7fdcf24bf40786ea79061919d1e1d.
It turns out that the bug that was triggered by that commit was
apparently not actually triggered by that commit at all, and just the
testing conditions had changed enough to make it appear to be due to it.
The real problem seems to have been found by Peter Osterlund:
"pktcdvd sets it [block device size] when opening the /dev/pktcdvd
device, but when the drive is later opened as /dev/scd0, there is
nothing that sets it back. (Btw, 40944 is possible if the disk is a
CDRW that was formatted with "cdrwtool -m 10236".)
The problem is that pktcdvd opens the cd device in non-blocking mode
when pktsetup is run, and doesn't close it again until pktsetup -d is
run. The effect is that if you meanwhile open the cd device,
blkdev.c:do_open() doesn't call bd_set_size() because
bdev->bd_openers is non-zero."
In particular, to repeat the bug (regardless of whether commit
6f5391c283d7fdcf24bf40786ea79061919d1e1d is applied or not):
" 1. Start with an empty drive.
2. pktsetup 0 /dev/scd0
3. Insert a CD containing an isofs filesystem.
4. mount /dev/pktcdvd/0 /mnt/tmp
5. umount /mnt/tmp
6. Press the eject button.
7. Insert a DVD containing a non-writable filesystem.
8. mount /dev/scd0 /mnt/tmp
9. find /mnt/tmp -type f -print0 | xargs -0 sha1sum >/dev/null
10. If the DVD contains data beyond the physical size of a CD, you
get I/O errors in the terminal, and dmesg reports lots of
"attempt to access beyond end of device" errors."
which in turn is because the nested open after the media change won't
cause the size to be set properly (because the original open still holds
the block device, and we only do the bd_set_size() when we don't have
other people holding the device open).
The proper fix for that is probably to just do something like
bdev->bd_inode->i_size = (loff_t)get_capacity(disk)<<9;
in fs/block_dev.c:do_open() even for the cases where we're not the
original opener (but *not* call bd_set_size(), since that will also
change the block size of the device).
Cc: Peter Osterlund <petero2@telia.com>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Matthew Wilcox <matthew@wil.cx>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-01-06 18:17:12 +00:00
|
|
|
static void sd_read_capacity(struct scsi_disk *sdkp, unsigned char *buffer);
|
2008-02-21 23:13:36 +00:00
|
|
|
static void scsi_disk_release(struct device *cdev);
|
Revert "scsi: revert "[SCSI] Get rid of scsi_cmnd->done""
This reverts commit ac40532ef0b8649e6f7f83859ea0de1c4ed08a19, which gets
us back the original cleanup of 6f5391c283d7fdcf24bf40786ea79061919d1e1d.
It turns out that the bug that was triggered by that commit was
apparently not actually triggered by that commit at all, and just the
testing conditions had changed enough to make it appear to be due to it.
The real problem seems to have been found by Peter Osterlund:
"pktcdvd sets it [block device size] when opening the /dev/pktcdvd
device, but when the drive is later opened as /dev/scd0, there is
nothing that sets it back. (Btw, 40944 is possible if the disk is a
CDRW that was formatted with "cdrwtool -m 10236".)
The problem is that pktcdvd opens the cd device in non-blocking mode
when pktsetup is run, and doesn't close it again until pktsetup -d is
run. The effect is that if you meanwhile open the cd device,
blkdev.c:do_open() doesn't call bd_set_size() because
bdev->bd_openers is non-zero."
In particular, to repeat the bug (regardless of whether commit
6f5391c283d7fdcf24bf40786ea79061919d1e1d is applied or not):
" 1. Start with an empty drive.
2. pktsetup 0 /dev/scd0
3. Insert a CD containing an isofs filesystem.
4. mount /dev/pktcdvd/0 /mnt/tmp
5. umount /mnt/tmp
6. Press the eject button.
7. Insert a DVD containing a non-writable filesystem.
8. mount /dev/scd0 /mnt/tmp
9. find /mnt/tmp -type f -print0 | xargs -0 sha1sum >/dev/null
10. If the DVD contains data beyond the physical size of a CD, you
get I/O errors in the terminal, and dmesg reports lots of
"attempt to access beyond end of device" errors."
which in turn is because the nested open after the media change won't
cause the size to be set properly (because the original open still holds
the block device, and we only do the bd_set_size() when we don't have
other people holding the device open).
The proper fix for that is probably to just do something like
bdev->bd_inode->i_size = (loff_t)get_capacity(disk)<<9;
in fs/block_dev.c:do_open() even for the cases where we're not the
original opener (but *not* call bd_set_size(), since that will also
change the block size of the device).
Cc: Peter Osterlund <petero2@telia.com>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Matthew Wilcox <matthew@wil.cx>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-01-06 18:17:12 +00:00
|
|
|
static void sd_print_sense_hdr(struct scsi_disk *, struct scsi_sense_hdr *);
|
2014-10-24 12:27:00 +00:00
|
|
|
static void sd_print_result(const struct scsi_disk *, const char *, int);
|
Revert "scsi: revert "[SCSI] Get rid of scsi_cmnd->done""
This reverts commit ac40532ef0b8649e6f7f83859ea0de1c4ed08a19, which gets
us back the original cleanup of 6f5391c283d7fdcf24bf40786ea79061919d1e1d.
It turns out that the bug that was triggered by that commit was
apparently not actually triggered by that commit at all, and just the
testing conditions had changed enough to make it appear to be due to it.
The real problem seems to have been found by Peter Osterlund:
"pktcdvd sets it [block device size] when opening the /dev/pktcdvd
device, but when the drive is later opened as /dev/scd0, there is
nothing that sets it back. (Btw, 40944 is possible if the disk is a
CDRW that was formatted with "cdrwtool -m 10236".)
The problem is that pktcdvd opens the cd device in non-blocking mode
when pktsetup is run, and doesn't close it again until pktsetup -d is
run. The effect is that if you meanwhile open the cd device,
blkdev.c:do_open() doesn't call bd_set_size() because
bdev->bd_openers is non-zero."
In particular, to repeat the bug (regardless of whether commit
6f5391c283d7fdcf24bf40786ea79061919d1e1d is applied or not):
" 1. Start with an empty drive.
2. pktsetup 0 /dev/scd0
3. Insert a CD containing an isofs filesystem.
4. mount /dev/pktcdvd/0 /mnt/tmp
5. umount /mnt/tmp
6. Press the eject button.
7. Insert a DVD containing a non-writable filesystem.
8. mount /dev/scd0 /mnt/tmp
9. find /mnt/tmp -type f -print0 | xargs -0 sha1sum >/dev/null
10. If the DVD contains data beyond the physical size of a CD, you
get I/O errors in the terminal, and dmesg reports lots of
"attempt to access beyond end of device" errors."
which in turn is because the nested open after the media change won't
cause the size to be set properly (because the original open still holds
the block device, and we only do the bd_set_size() when we don't have
other people holding the device open).
The proper fix for that is probably to just do something like
bdev->bd_inode->i_size = (loff_t)get_capacity(disk)<<9;
in fs/block_dev.c:do_open() even for the cases where we're not the
original opener (but *not* call bd_set_size(), since that will also
change the block size of the device).
Cc: Peter Osterlund <petero2@telia.com>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Matthew Wilcox <matthew@wil.cx>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-01-06 18:17:12 +00:00
|
|
|
|
2009-02-21 02:04:45 +00:00
|
|
|
static DEFINE_SPINLOCK(sd_index_lock);
|
2008-07-14 05:59:30 +00:00
|
|
|
static DEFINE_IDA(sd_index_ida);
|
2005-04-16 22:20:36 +00:00
|
|
|
|
|
|
|
/* This semaphore is used to mediate the 0->1 reference get in the
|
|
|
|
* face of object destruction (i.e. we can't allow a get on an
|
|
|
|
* object after last put) */
|
2006-01-11 12:16:10 +00:00
|
|
|
static DEFINE_MUTEX(sd_ref_mutex);
|
2005-04-16 22:20:36 +00:00
|
|
|
|
2010-08-11 01:01:20 +00:00
|
|
|
static struct kmem_cache *sd_cdb_cache;
|
|
|
|
static mempool_t *sd_cdb_pool;
|
2009-09-20 20:49:38 +00:00
|
|
|
|
2006-03-18 20:14:21 +00:00
|
|
|
static const char *sd_cache_types[] = {
|
|
|
|
"write through", "none", "write back",
|
|
|
|
"write back, no read (daft)"
|
|
|
|
};
|
|
|
|
|
2014-06-03 09:37:30 +00:00
|
|
|
static void sd_set_flush_flag(struct scsi_disk *sdkp)
|
|
|
|
{
|
|
|
|
unsigned flush = 0;
|
|
|
|
|
|
|
|
if (sdkp->WCE) {
|
|
|
|
flush |= REQ_FLUSH;
|
|
|
|
if (sdkp->DPOFUA)
|
|
|
|
flush |= REQ_FUA;
|
|
|
|
}
|
|
|
|
|
|
|
|
blk_queue_flush(sdkp->disk->queue, flush);
|
|
|
|
}
|
|
|
|
|
2008-02-21 23:13:36 +00:00
|
|
|
static ssize_t
|
2013-07-24 22:05:28 +00:00
|
|
|
cache_type_store(struct device *dev, struct device_attribute *attr,
|
|
|
|
const char *buf, size_t count)
|
2006-03-18 20:14:21 +00:00
|
|
|
{
|
|
|
|
int i, ct = -1, rcd, wce, sp;
|
2008-02-21 23:13:36 +00:00
|
|
|
struct scsi_disk *sdkp = to_scsi_disk(dev);
|
2006-03-18 20:14:21 +00:00
|
|
|
struct scsi_device *sdp = sdkp->device;
|
|
|
|
char buffer[64];
|
|
|
|
char *buffer_data;
|
|
|
|
struct scsi_mode_data data;
|
|
|
|
struct scsi_sense_hdr sshdr;
|
2013-05-27 18:07:19 +00:00
|
|
|
static const char temp[] = "temporary ";
|
2006-03-18 20:14:21 +00:00
|
|
|
int len;
|
|
|
|
|
|
|
|
if (sdp->type != TYPE_DISK)
|
|
|
|
/* no cache control on RBC devices; theoretically they
|
|
|
|
* can do it, but there's probably so many exceptions
|
|
|
|
* it's not worth the risk */
|
|
|
|
return -EINVAL;
|
|
|
|
|
2013-04-24 21:02:53 +00:00
|
|
|
if (strncmp(buf, temp, sizeof(temp) - 1) == 0) {
|
|
|
|
buf += sizeof(temp) - 1;
|
|
|
|
sdkp->cache_override = 1;
|
|
|
|
} else {
|
|
|
|
sdkp->cache_override = 0;
|
|
|
|
}
|
|
|
|
|
2006-06-09 05:23:48 +00:00
|
|
|
for (i = 0; i < ARRAY_SIZE(sd_cache_types); i++) {
|
2010-08-11 01:01:20 +00:00
|
|
|
len = strlen(sd_cache_types[i]);
|
2006-03-18 20:14:21 +00:00
|
|
|
if (strncmp(sd_cache_types[i], buf, len) == 0 &&
|
|
|
|
buf[len] == '\n') {
|
|
|
|
ct = i;
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
if (ct < 0)
|
|
|
|
return -EINVAL;
|
|
|
|
rcd = ct & 0x01 ? 1 : 0;
|
2014-08-11 12:40:37 +00:00
|
|
|
wce = (ct & 0x02) && !sdkp->write_prot ? 1 : 0;
|
2013-04-24 21:02:53 +00:00
|
|
|
|
|
|
|
if (sdkp->cache_override) {
|
|
|
|
sdkp->WCE = wce;
|
|
|
|
sdkp->RCD = rcd;
|
2014-06-03 09:37:30 +00:00
|
|
|
sd_set_flush_flag(sdkp);
|
2013-04-24 21:02:53 +00:00
|
|
|
return count;
|
|
|
|
}
|
|
|
|
|
2006-03-18 20:14:21 +00:00
|
|
|
if (scsi_mode_sense(sdp, 0x08, 8, buffer, sizeof(buffer), SD_TIMEOUT,
|
|
|
|
SD_MAX_RETRIES, &data, NULL))
|
|
|
|
return -EINVAL;
|
2006-03-25 11:08:30 +00:00
|
|
|
len = min_t(size_t, sizeof(buffer), data.length - data.header_length -
|
2006-03-18 20:14:21 +00:00
|
|
|
data.block_descriptor_length);
|
|
|
|
buffer_data = buffer + data.header_length +
|
|
|
|
data.block_descriptor_length;
|
|
|
|
buffer_data[2] &= ~0x05;
|
|
|
|
buffer_data[2] |= wce << 2 | rcd;
|
|
|
|
sp = buffer_data[0] & 0x80 ? 1 : 0;
|
|
|
|
|
|
|
|
if (scsi_mode_select(sdp, 1, sp, 8, buffer_data, len, SD_TIMEOUT,
|
|
|
|
SD_MAX_RETRIES, &data, &sshdr)) {
|
|
|
|
if (scsi_sense_valid(&sshdr))
|
2007-02-28 03:40:55 +00:00
|
|
|
sd_print_sense_hdr(sdkp, &sshdr);
|
2006-03-18 20:14:21 +00:00
|
|
|
return -EINVAL;
|
|
|
|
}
|
2008-09-04 20:27:35 +00:00
|
|
|
revalidate_disk(sdkp->disk);
|
2006-03-18 20:14:21 +00:00
|
|
|
return count;
|
|
|
|
}
|
|
|
|
|
2008-02-21 23:13:36 +00:00
|
|
|
static ssize_t
|
2013-07-24 22:05:28 +00:00
|
|
|
manage_start_stop_show(struct device *dev, struct device_attribute *attr,
|
|
|
|
char *buf)
|
|
|
|
{
|
|
|
|
struct scsi_disk *sdkp = to_scsi_disk(dev);
|
|
|
|
struct scsi_device *sdp = sdkp->device;
|
|
|
|
|
|
|
|
return snprintf(buf, 20, "%u\n", sdp->manage_start_stop);
|
|
|
|
}
|
|
|
|
|
|
|
|
static ssize_t
|
|
|
|
manage_start_stop_store(struct device *dev, struct device_attribute *attr,
|
|
|
|
const char *buf, size_t count)
|
2007-03-20 15:13:59 +00:00
|
|
|
{
|
2008-02-21 23:13:36 +00:00
|
|
|
struct scsi_disk *sdkp = to_scsi_disk(dev);
|
2007-03-20 15:13:59 +00:00
|
|
|
struct scsi_device *sdp = sdkp->device;
|
|
|
|
|
|
|
|
if (!capable(CAP_SYS_ADMIN))
|
|
|
|
return -EACCES;
|
|
|
|
|
|
|
|
sdp->manage_start_stop = simple_strtoul(buf, NULL, 10);
|
|
|
|
|
|
|
|
return count;
|
|
|
|
}
|
2013-07-24 22:05:28 +00:00
|
|
|
static DEVICE_ATTR_RW(manage_start_stop);
|
2007-03-20 15:13:59 +00:00
|
|
|
|
2008-02-21 23:13:36 +00:00
|
|
|
static ssize_t
|
2013-07-24 22:05:28 +00:00
|
|
|
allow_restart_show(struct device *dev, struct device_attribute *attr, char *buf)
|
|
|
|
{
|
|
|
|
struct scsi_disk *sdkp = to_scsi_disk(dev);
|
|
|
|
|
|
|
|
return snprintf(buf, 40, "%d\n", sdkp->device->allow_restart);
|
|
|
|
}
|
|
|
|
|
|
|
|
static ssize_t
|
|
|
|
allow_restart_store(struct device *dev, struct device_attribute *attr,
|
|
|
|
const char *buf, size_t count)
|
2006-06-27 16:10:31 +00:00
|
|
|
{
|
2008-02-21 23:13:36 +00:00
|
|
|
struct scsi_disk *sdkp = to_scsi_disk(dev);
|
2006-06-27 16:10:31 +00:00
|
|
|
struct scsi_device *sdp = sdkp->device;
|
|
|
|
|
|
|
|
if (!capable(CAP_SYS_ADMIN))
|
|
|
|
return -EACCES;
|
|
|
|
|
|
|
|
if (sdp->type != TYPE_DISK)
|
|
|
|
return -EINVAL;
|
|
|
|
|
|
|
|
sdp->allow_restart = simple_strtoul(buf, NULL, 10);
|
|
|
|
|
|
|
|
return count;
|
|
|
|
}
|
2013-07-24 22:05:28 +00:00
|
|
|
static DEVICE_ATTR_RW(allow_restart);
|
2006-06-27 16:10:31 +00:00
|
|
|
|
2008-02-21 23:13:36 +00:00
|
|
|
static ssize_t
|
2013-07-24 22:05:28 +00:00
|
|
|
cache_type_show(struct device *dev, struct device_attribute *attr, char *buf)
|
2006-03-18 20:14:21 +00:00
|
|
|
{
|
2008-02-21 23:13:36 +00:00
|
|
|
struct scsi_disk *sdkp = to_scsi_disk(dev);
|
2006-03-18 20:14:21 +00:00
|
|
|
int ct = sdkp->RCD + 2*sdkp->WCE;
|
|
|
|
|
|
|
|
return snprintf(buf, 40, "%s\n", sd_cache_types[ct]);
|
|
|
|
}
|
2013-07-24 22:05:28 +00:00
|
|
|
static DEVICE_ATTR_RW(cache_type);
|
2006-03-18 20:14:21 +00:00
|
|
|
|
2008-02-21 23:13:36 +00:00
|
|
|
static ssize_t
|
2013-07-24 22:05:28 +00:00
|
|
|
FUA_show(struct device *dev, struct device_attribute *attr, char *buf)
|
2006-03-18 20:14:21 +00:00
|
|
|
{
|
2008-02-21 23:13:36 +00:00
|
|
|
struct scsi_disk *sdkp = to_scsi_disk(dev);
|
2006-03-18 20:14:21 +00:00
|
|
|
|
|
|
|
return snprintf(buf, 20, "%u\n", sdkp->DPOFUA);
|
|
|
|
}
|
2013-07-24 22:05:28 +00:00
|
|
|
static DEVICE_ATTR_RO(FUA);
|
2006-03-18 20:14:21 +00:00
|
|
|
|
2008-02-21 23:13:36 +00:00
|
|
|
static ssize_t
|
2013-07-24 22:05:28 +00:00
|
|
|
protection_type_show(struct device *dev, struct device_attribute *attr,
|
|
|
|
char *buf)
|
2008-07-17 08:28:34 +00:00
|
|
|
{
|
|
|
|
struct scsi_disk *sdkp = to_scsi_disk(dev);
|
|
|
|
|
|
|
|
return snprintf(buf, 20, "%u\n", sdkp->protection_type);
|
|
|
|
}
|
|
|
|
|
2012-08-28 18:29:34 +00:00
|
|
|
static ssize_t
|
2013-07-24 22:05:28 +00:00
|
|
|
protection_type_store(struct device *dev, struct device_attribute *attr,
|
|
|
|
const char *buf, size_t count)
|
2012-08-28 18:29:34 +00:00
|
|
|
{
|
|
|
|
struct scsi_disk *sdkp = to_scsi_disk(dev);
|
|
|
|
unsigned int val;
|
|
|
|
int err;
|
|
|
|
|
|
|
|
if (!capable(CAP_SYS_ADMIN))
|
|
|
|
return -EACCES;
|
|
|
|
|
|
|
|
err = kstrtouint(buf, 10, &val);
|
|
|
|
|
|
|
|
if (err)
|
|
|
|
return err;
|
|
|
|
|
|
|
|
if (val >= 0 && val <= SD_DIF_TYPE3_PROTECTION)
|
|
|
|
sdkp->protection_type = val;
|
|
|
|
|
|
|
|
return count;
|
|
|
|
}
|
2013-07-24 22:05:28 +00:00
|
|
|
static DEVICE_ATTR_RW(protection_type);
|
2012-08-28 18:29:34 +00:00
|
|
|
|
2010-10-08 05:36:24 +00:00
|
|
|
static ssize_t
|
2013-07-24 22:05:28 +00:00
|
|
|
protection_mode_show(struct device *dev, struct device_attribute *attr,
|
|
|
|
char *buf)
|
2010-10-08 05:36:24 +00:00
|
|
|
{
|
|
|
|
struct scsi_disk *sdkp = to_scsi_disk(dev);
|
|
|
|
struct scsi_device *sdp = sdkp->device;
|
|
|
|
unsigned int dif, dix;
|
|
|
|
|
|
|
|
dif = scsi_host_dif_capable(sdp->host, sdkp->protection_type);
|
|
|
|
dix = scsi_host_dix_capable(sdp->host, sdkp->protection_type);
|
|
|
|
|
|
|
|
if (!dix && scsi_host_dix_capable(sdp->host, SD_DIF_TYPE0_PROTECTION)) {
|
|
|
|
dif = 0;
|
|
|
|
dix = 1;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (!dif && !dix)
|
|
|
|
return snprintf(buf, 20, "none\n");
|
|
|
|
|
|
|
|
return snprintf(buf, 20, "%s%u\n", dix ? "dix" : "dif", dif);
|
|
|
|
}
|
2013-07-24 22:05:28 +00:00
|
|
|
static DEVICE_ATTR_RO(protection_mode);
|
2010-10-08 05:36:24 +00:00
|
|
|
|
2008-07-17 08:28:34 +00:00
|
|
|
static ssize_t
|
2013-07-24 22:05:28 +00:00
|
|
|
app_tag_own_show(struct device *dev, struct device_attribute *attr, char *buf)
|
2008-07-17 08:28:34 +00:00
|
|
|
{
|
|
|
|
struct scsi_disk *sdkp = to_scsi_disk(dev);
|
|
|
|
|
|
|
|
return snprintf(buf, 20, "%u\n", sdkp->ATO);
|
|
|
|
}
|
2013-07-24 22:05:28 +00:00
|
|
|
static DEVICE_ATTR_RO(app_tag_own);
|
2008-07-17 08:28:34 +00:00
|
|
|
|
2009-11-26 17:00:40 +00:00
|
|
|
static ssize_t
|
2013-07-24 22:05:28 +00:00
|
|
|
thin_provisioning_show(struct device *dev, struct device_attribute *attr,
|
|
|
|
char *buf)
|
2009-11-26 17:00:40 +00:00
|
|
|
{
|
|
|
|
struct scsi_disk *sdkp = to_scsi_disk(dev);
|
|
|
|
|
2011-03-08 07:07:15 +00:00
|
|
|
return snprintf(buf, 20, "%u\n", sdkp->lbpme);
|
|
|
|
}
|
2013-07-24 22:05:28 +00:00
|
|
|
static DEVICE_ATTR_RO(thin_provisioning);
|
2011-03-08 07:07:15 +00:00
|
|
|
|
|
|
|
static const char *lbp_mode[] = {
|
|
|
|
[SD_LBP_FULL] = "full",
|
|
|
|
[SD_LBP_UNMAP] = "unmap",
|
|
|
|
[SD_LBP_WS16] = "writesame_16",
|
|
|
|
[SD_LBP_WS10] = "writesame_10",
|
|
|
|
[SD_LBP_ZERO] = "writesame_zero",
|
|
|
|
[SD_LBP_DISABLE] = "disabled",
|
|
|
|
};
|
|
|
|
|
|
|
|
static ssize_t
|
2013-07-24 22:05:28 +00:00
|
|
|
provisioning_mode_show(struct device *dev, struct device_attribute *attr,
|
|
|
|
char *buf)
|
2011-03-08 07:07:15 +00:00
|
|
|
{
|
|
|
|
struct scsi_disk *sdkp = to_scsi_disk(dev);
|
|
|
|
|
|
|
|
return snprintf(buf, 20, "%s\n", lbp_mode[sdkp->provisioning_mode]);
|
|
|
|
}
|
|
|
|
|
|
|
|
static ssize_t
|
2013-07-24 22:05:28 +00:00
|
|
|
provisioning_mode_store(struct device *dev, struct device_attribute *attr,
|
|
|
|
const char *buf, size_t count)
|
2011-03-08 07:07:15 +00:00
|
|
|
{
|
|
|
|
struct scsi_disk *sdkp = to_scsi_disk(dev);
|
|
|
|
struct scsi_device *sdp = sdkp->device;
|
|
|
|
|
|
|
|
if (!capable(CAP_SYS_ADMIN))
|
|
|
|
return -EACCES;
|
|
|
|
|
|
|
|
if (sdp->type != TYPE_DISK)
|
|
|
|
return -EINVAL;
|
|
|
|
|
|
|
|
if (!strncmp(buf, lbp_mode[SD_LBP_UNMAP], 20))
|
|
|
|
sd_config_discard(sdkp, SD_LBP_UNMAP);
|
|
|
|
else if (!strncmp(buf, lbp_mode[SD_LBP_WS16], 20))
|
|
|
|
sd_config_discard(sdkp, SD_LBP_WS16);
|
|
|
|
else if (!strncmp(buf, lbp_mode[SD_LBP_WS10], 20))
|
|
|
|
sd_config_discard(sdkp, SD_LBP_WS10);
|
|
|
|
else if (!strncmp(buf, lbp_mode[SD_LBP_ZERO], 20))
|
|
|
|
sd_config_discard(sdkp, SD_LBP_ZERO);
|
|
|
|
else if (!strncmp(buf, lbp_mode[SD_LBP_DISABLE], 20))
|
|
|
|
sd_config_discard(sdkp, SD_LBP_DISABLE);
|
|
|
|
else
|
|
|
|
return -EINVAL;
|
|
|
|
|
|
|
|
return count;
|
2009-11-26 17:00:40 +00:00
|
|
|
}
|
2013-07-24 22:05:28 +00:00
|
|
|
static DEVICE_ATTR_RW(provisioning_mode);
|
2009-11-26 17:00:40 +00:00
|
|
|
|
2012-02-09 18:48:53 +00:00
|
|
|
static ssize_t
|
2013-07-24 22:05:28 +00:00
|
|
|
max_medium_access_timeouts_show(struct device *dev,
|
|
|
|
struct device_attribute *attr, char *buf)
|
2012-02-09 18:48:53 +00:00
|
|
|
{
|
|
|
|
struct scsi_disk *sdkp = to_scsi_disk(dev);
|
|
|
|
|
|
|
|
return snprintf(buf, 20, "%u\n", sdkp->max_medium_access_timeouts);
|
|
|
|
}
|
|
|
|
|
|
|
|
static ssize_t
|
2013-07-24 22:05:28 +00:00
|
|
|
max_medium_access_timeouts_store(struct device *dev,
|
|
|
|
struct device_attribute *attr, const char *buf,
|
|
|
|
size_t count)
|
2012-02-09 18:48:53 +00:00
|
|
|
{
|
|
|
|
struct scsi_disk *sdkp = to_scsi_disk(dev);
|
|
|
|
int err;
|
|
|
|
|
|
|
|
if (!capable(CAP_SYS_ADMIN))
|
|
|
|
return -EACCES;
|
|
|
|
|
|
|
|
err = kstrtouint(buf, 10, &sdkp->max_medium_access_timeouts);
|
|
|
|
|
|
|
|
return err ? err : count;
|
|
|
|
}
|
2013-07-24 22:05:28 +00:00
|
|
|
static DEVICE_ATTR_RW(max_medium_access_timeouts);
|
2012-02-09 18:48:53 +00:00
|
|
|
|
2012-09-18 16:19:32 +00:00
|
|
|
static ssize_t
|
2013-07-24 22:05:28 +00:00
|
|
|
max_write_same_blocks_show(struct device *dev, struct device_attribute *attr,
|
|
|
|
char *buf)
|
2012-09-18 16:19:32 +00:00
|
|
|
{
|
|
|
|
struct scsi_disk *sdkp = to_scsi_disk(dev);
|
|
|
|
|
|
|
|
return snprintf(buf, 20, "%u\n", sdkp->max_ws_blocks);
|
|
|
|
}
|
|
|
|
|
|
|
|
static ssize_t
|
2013-07-24 22:05:28 +00:00
|
|
|
max_write_same_blocks_store(struct device *dev, struct device_attribute *attr,
|
|
|
|
const char *buf, size_t count)
|
2012-09-18 16:19:32 +00:00
|
|
|
{
|
|
|
|
struct scsi_disk *sdkp = to_scsi_disk(dev);
|
|
|
|
struct scsi_device *sdp = sdkp->device;
|
|
|
|
unsigned long max;
|
|
|
|
int err;
|
|
|
|
|
|
|
|
if (!capable(CAP_SYS_ADMIN))
|
|
|
|
return -EACCES;
|
|
|
|
|
|
|
|
if (sdp->type != TYPE_DISK)
|
|
|
|
return -EINVAL;
|
|
|
|
|
|
|
|
err = kstrtoul(buf, 10, &max);
|
|
|
|
|
|
|
|
if (err)
|
|
|
|
return err;
|
|
|
|
|
|
|
|
if (max == 0)
|
|
|
|
sdp->no_write_same = 1;
|
2013-06-07 02:15:55 +00:00
|
|
|
else if (max <= SD_MAX_WS16_BLOCKS) {
|
|
|
|
sdp->no_write_same = 0;
|
2012-09-18 16:19:32 +00:00
|
|
|
sdkp->max_ws_blocks = max;
|
2013-06-07 02:15:55 +00:00
|
|
|
}
|
2012-09-18 16:19:32 +00:00
|
|
|
|
|
|
|
sd_config_write_same(sdkp);
|
|
|
|
|
|
|
|
return count;
|
|
|
|
}
|
2013-07-24 22:05:28 +00:00
|
|
|
static DEVICE_ATTR_RW(max_write_same_blocks);
|
|
|
|
|
|
|
|
static struct attribute *sd_disk_attrs[] = {
|
|
|
|
&dev_attr_cache_type.attr,
|
|
|
|
&dev_attr_FUA.attr,
|
|
|
|
&dev_attr_allow_restart.attr,
|
|
|
|
&dev_attr_manage_start_stop.attr,
|
|
|
|
&dev_attr_protection_type.attr,
|
|
|
|
&dev_attr_protection_mode.attr,
|
|
|
|
&dev_attr_app_tag_own.attr,
|
|
|
|
&dev_attr_thin_provisioning.attr,
|
|
|
|
&dev_attr_provisioning_mode.attr,
|
|
|
|
&dev_attr_max_write_same_blocks.attr,
|
|
|
|
&dev_attr_max_medium_access_timeouts.attr,
|
|
|
|
NULL,
|
2006-03-18 20:14:21 +00:00
|
|
|
};
|
2013-07-24 22:05:28 +00:00
|
|
|
ATTRIBUTE_GROUPS(sd_disk);
|
2006-03-18 20:14:21 +00:00
|
|
|
|
|
|
|
static struct class sd_disk_class = {
|
|
|
|
.name = "scsi_disk",
|
|
|
|
.owner = THIS_MODULE,
|
2008-02-21 23:13:36 +00:00
|
|
|
.dev_release = scsi_disk_release,
|
2013-07-24 22:05:28 +00:00
|
|
|
.dev_groups = sd_disk_groups,
|
2006-03-18 20:14:21 +00:00
|
|
|
};
|
2005-04-16 22:20:36 +00:00
|
|
|
|
2012-11-09 07:27:55 +00:00
|
|
|
static const struct dev_pm_ops sd_pm_ops = {
|
2013-09-16 11:28:15 +00:00
|
|
|
.suspend = sd_suspend_system,
|
2012-11-09 07:27:55 +00:00
|
|
|
.resume = sd_resume,
|
2013-09-16 11:28:15 +00:00
|
|
|
.poweroff = sd_suspend_system,
|
2012-11-09 07:27:55 +00:00
|
|
|
.restore = sd_resume,
|
2013-09-16 11:28:15 +00:00
|
|
|
.runtime_suspend = sd_suspend_runtime,
|
2012-11-09 07:27:55 +00:00
|
|
|
.runtime_resume = sd_resume,
|
|
|
|
};
|
|
|
|
|
2005-04-16 22:20:36 +00:00
|
|
|
static struct scsi_driver sd_template = {
|
|
|
|
.gendrv = {
|
|
|
|
.name = "sd",
|
2014-11-12 17:34:51 +00:00
|
|
|
.owner = THIS_MODULE,
|
2005-04-16 22:20:36 +00:00
|
|
|
.probe = sd_probe,
|
|
|
|
.remove = sd_remove,
|
|
|
|
.shutdown = sd_shutdown,
|
2012-11-09 07:27:55 +00:00
|
|
|
.pm = &sd_pm_ops,
|
2005-04-16 22:20:36 +00:00
|
|
|
},
|
|
|
|
.rescan = sd_rescan,
|
2014-05-01 14:51:04 +00:00
|
|
|
.init_command = sd_init_command,
|
|
|
|
.uninit_command = sd_uninit_command,
|
Revert "scsi: revert "[SCSI] Get rid of scsi_cmnd->done""
This reverts commit ac40532ef0b8649e6f7f83859ea0de1c4ed08a19, which gets
us back the original cleanup of 6f5391c283d7fdcf24bf40786ea79061919d1e1d.
It turns out that the bug that was triggered by that commit was
apparently not actually triggered by that commit at all, and just the
testing conditions had changed enough to make it appear to be due to it.
The real problem seems to have been found by Peter Osterlund:
"pktcdvd sets it [block device size] when opening the /dev/pktcdvd
device, but when the drive is later opened as /dev/scd0, there is
nothing that sets it back. (Btw, 40944 is possible if the disk is a
CDRW that was formatted with "cdrwtool -m 10236".)
The problem is that pktcdvd opens the cd device in non-blocking mode
when pktsetup is run, and doesn't close it again until pktsetup -d is
run. The effect is that if you meanwhile open the cd device,
blkdev.c:do_open() doesn't call bd_set_size() because
bdev->bd_openers is non-zero."
In particular, to repeat the bug (regardless of whether commit
6f5391c283d7fdcf24bf40786ea79061919d1e1d is applied or not):
" 1. Start with an empty drive.
2. pktsetup 0 /dev/scd0
3. Insert a CD containing an isofs filesystem.
4. mount /dev/pktcdvd/0 /mnt/tmp
5. umount /mnt/tmp
6. Press the eject button.
7. Insert a DVD containing a non-writable filesystem.
8. mount /dev/scd0 /mnt/tmp
9. find /mnt/tmp -type f -print0 | xargs -0 sha1sum >/dev/null
10. If the DVD contains data beyond the physical size of a CD, you
get I/O errors in the terminal, and dmesg reports lots of
"attempt to access beyond end of device" errors."
which in turn is because the nested open after the media change won't
cause the size to be set properly (because the original open still holds
the block device, and we only do the bd_set_size() when we don't have
other people holding the device open).
The proper fix for that is probably to just do something like
bdev->bd_inode->i_size = (loff_t)get_capacity(disk)<<9;
in fs/block_dev.c:do_open() even for the cases where we're not the
original opener (but *not* call bd_set_size(), since that will also
change the block size of the device).
Cc: Peter Osterlund <petero2@telia.com>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Matthew Wilcox <matthew@wil.cx>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-01-06 18:17:12 +00:00
|
|
|
.done = sd_done,
|
2012-02-09 18:48:53 +00:00
|
|
|
.eh_action = sd_eh_action,
|
2005-04-16 22:20:36 +00:00
|
|
|
};
|
|
|
|
|
2013-05-10 09:06:16 +00:00
|
|
|
/*
|
|
|
|
* Dummy kobj_map->probe function.
|
|
|
|
* The default ->probe function will call modprobe, which is
|
|
|
|
* pointless as this module is already loaded.
|
|
|
|
*/
|
|
|
|
static struct kobject *sd_default_probe(dev_t devt, int *partno, void *data)
|
|
|
|
{
|
|
|
|
return NULL;
|
|
|
|
}
|
|
|
|
|
2005-04-16 22:20:36 +00:00
|
|
|
/*
|
|
|
|
* Device no to disk mapping:
|
|
|
|
*
|
|
|
|
* major disc2 disc p1
|
|
|
|
* |............|.............|....|....| <- dev_t
|
|
|
|
* 31 20 19 8 7 4 3 0
|
|
|
|
*
|
|
|
|
* Inside a major, we have 16k disks, however mapped non-
|
|
|
|
* contiguously. The first 16 disks are for major0, the next
|
|
|
|
* ones with major1, ... Disk 256 is for major0 again, disk 272
|
|
|
|
* for major1, ...
|
|
|
|
* As we stay compatible with our numbering scheme, we can reuse
|
|
|
|
* the well-know SCSI majors 8, 65--71, 136--143.
|
|
|
|
*/
|
|
|
|
static int sd_major(int major_idx)
|
|
|
|
{
|
|
|
|
switch (major_idx) {
|
|
|
|
case 0:
|
|
|
|
return SCSI_DISK0_MAJOR;
|
|
|
|
case 1 ... 7:
|
|
|
|
return SCSI_DISK1_MAJOR + major_idx - 1;
|
|
|
|
case 8 ... 15:
|
|
|
|
return SCSI_DISK8_MAJOR + major_idx - 8;
|
|
|
|
default:
|
|
|
|
BUG();
|
|
|
|
return 0; /* shut up gcc */
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2015-02-02 13:01:25 +00:00
|
|
|
static struct scsi_disk *scsi_disk_get(struct gendisk *disk)
|
2005-04-16 22:20:36 +00:00
|
|
|
{
|
|
|
|
struct scsi_disk *sdkp = NULL;
|
|
|
|
|
2015-02-02 13:01:25 +00:00
|
|
|
mutex_lock(&sd_ref_mutex);
|
|
|
|
|
2005-11-04 19:44:41 +00:00
|
|
|
if (disk->private_data) {
|
|
|
|
sdkp = scsi_disk(disk);
|
|
|
|
if (scsi_device_get(sdkp->device) == 0)
|
2008-02-21 23:13:36 +00:00
|
|
|
get_device(&sdkp->dev);
|
2005-11-04 19:44:41 +00:00
|
|
|
else
|
|
|
|
sdkp = NULL;
|
|
|
|
}
|
2006-01-11 12:16:10 +00:00
|
|
|
mutex_unlock(&sd_ref_mutex);
|
2005-04-16 22:20:36 +00:00
|
|
|
return sdkp;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void scsi_disk_put(struct scsi_disk *sdkp)
|
|
|
|
{
|
|
|
|
struct scsi_device *sdev = sdkp->device;
|
|
|
|
|
2006-01-11 12:16:10 +00:00
|
|
|
mutex_lock(&sd_ref_mutex);
|
2008-02-21 23:13:36 +00:00
|
|
|
put_device(&sdkp->dev);
|
2005-04-16 22:20:36 +00:00
|
|
|
scsi_device_put(sdev);
|
2006-01-11 12:16:10 +00:00
|
|
|
mutex_unlock(&sd_ref_mutex);
|
2005-04-16 22:20:36 +00:00
|
|
|
}
|
|
|
|
|
2014-09-26 23:20:08 +00:00
|
|
|
static unsigned char sd_setup_protect_cmnd(struct scsi_cmnd *scmd,
|
|
|
|
unsigned int dix, unsigned int dif)
|
2009-09-18 21:33:00 +00:00
|
|
|
{
|
2014-09-26 23:20:08 +00:00
|
|
|
struct bio *bio = scmd->request->bio;
|
|
|
|
unsigned int prot_op = sd_prot_op(rq_data_dir(scmd->request), dix, dif);
|
|
|
|
unsigned int protect = 0;
|
|
|
|
|
|
|
|
if (dix) { /* DIX Type 0, 1, 2, 3 */
|
|
|
|
if (bio_integrity_flagged(bio, BIP_IP_CHECKSUM))
|
|
|
|
scmd->prot_flags |= SCSI_PROT_IP_CHECKSUM;
|
|
|
|
|
|
|
|
if (bio_integrity_flagged(bio, BIP_CTRL_NOCHECK) == false)
|
|
|
|
scmd->prot_flags |= SCSI_PROT_GUARD_CHECK;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (dif != SD_DIF_TYPE3_PROTECTION) { /* DIX/DIF Type 0, 1, 2 */
|
|
|
|
scmd->prot_flags |= SCSI_PROT_REF_INCREMENT;
|
|
|
|
|
|
|
|
if (bio_integrity_flagged(bio, BIP_CTRL_NOCHECK) == false)
|
|
|
|
scmd->prot_flags |= SCSI_PROT_REF_CHECK;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (dif) { /* DIX/DIF Type 1, 2, 3 */
|
|
|
|
scmd->prot_flags |= SCSI_PROT_TRANSFER_PI;
|
|
|
|
|
|
|
|
if (bio_integrity_flagged(bio, BIP_DISK_NOCHECK))
|
|
|
|
protect = 3 << 5; /* Disable target PI checking */
|
|
|
|
else
|
|
|
|
protect = 1 << 5; /* Enable target PI checking */
|
2009-09-18 21:33:00 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
scsi_set_prot_op(scmd, prot_op);
|
|
|
|
scsi_set_prot_type(scmd, dif);
|
2014-09-26 23:20:08 +00:00
|
|
|
scmd->prot_flags &= sd_prot_flag_mask(prot_op);
|
|
|
|
|
|
|
|
return protect;
|
2009-09-18 21:33:00 +00:00
|
|
|
}
|
|
|
|
|
2011-03-08 07:07:15 +00:00
|
|
|
static void sd_config_discard(struct scsi_disk *sdkp, unsigned int mode)
|
|
|
|
{
|
|
|
|
struct request_queue *q = sdkp->disk->queue;
|
|
|
|
unsigned int logical_block_size = sdkp->device->sector_size;
|
|
|
|
unsigned int max_blocks = 0;
|
|
|
|
|
2014-11-07 05:08:13 +00:00
|
|
|
q->limits.discard_zeroes_data = 0;
|
2011-05-18 04:31:07 +00:00
|
|
|
q->limits.discard_alignment = sdkp->unmap_alignment *
|
|
|
|
logical_block_size;
|
2011-03-08 07:07:15 +00:00
|
|
|
q->limits.discard_granularity =
|
|
|
|
max(sdkp->physical_block_size,
|
|
|
|
sdkp->unmap_granularity * logical_block_size);
|
|
|
|
|
2012-02-13 20:39:00 +00:00
|
|
|
sdkp->provisioning_mode = mode;
|
|
|
|
|
2011-03-08 07:07:15 +00:00
|
|
|
switch (mode) {
|
|
|
|
|
|
|
|
case SD_LBP_DISABLE:
|
2015-07-14 14:15:12 +00:00
|
|
|
blk_queue_max_discard_sectors(q, 0);
|
2011-03-08 07:07:15 +00:00
|
|
|
queue_flag_clear_unlocked(QUEUE_FLAG_DISCARD, q);
|
|
|
|
return;
|
|
|
|
|
|
|
|
case SD_LBP_UNMAP:
|
2012-09-18 16:19:32 +00:00
|
|
|
max_blocks = min_not_zero(sdkp->max_unmap_blocks,
|
|
|
|
(u32)SD_MAX_WS16_BLOCKS);
|
2011-03-08 07:07:15 +00:00
|
|
|
break;
|
|
|
|
|
|
|
|
case SD_LBP_WS16:
|
2012-09-18 16:19:32 +00:00
|
|
|
max_blocks = min_not_zero(sdkp->max_ws_blocks,
|
|
|
|
(u32)SD_MAX_WS16_BLOCKS);
|
2014-11-07 05:08:13 +00:00
|
|
|
q->limits.discard_zeroes_data = sdkp->lbprz;
|
2011-03-08 07:07:15 +00:00
|
|
|
break;
|
|
|
|
|
|
|
|
case SD_LBP_WS10:
|
2012-09-18 16:19:32 +00:00
|
|
|
max_blocks = min_not_zero(sdkp->max_ws_blocks,
|
|
|
|
(u32)SD_MAX_WS10_BLOCKS);
|
2014-11-07 05:08:13 +00:00
|
|
|
q->limits.discard_zeroes_data = sdkp->lbprz;
|
2011-03-08 07:07:15 +00:00
|
|
|
break;
|
|
|
|
|
|
|
|
case SD_LBP_ZERO:
|
2012-09-18 16:19:32 +00:00
|
|
|
max_blocks = min_not_zero(sdkp->max_ws_blocks,
|
|
|
|
(u32)SD_MAX_WS10_BLOCKS);
|
2011-03-08 07:07:15 +00:00
|
|
|
q->limits.discard_zeroes_data = 1;
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
|
2015-07-14 14:15:12 +00:00
|
|
|
blk_queue_max_discard_sectors(q, max_blocks * (logical_block_size >> 9));
|
2011-03-08 07:07:15 +00:00
|
|
|
queue_flag_set_unlocked(QUEUE_FLAG_DISCARD, q);
|
|
|
|
}
|
|
|
|
|
2009-11-26 17:00:40 +00:00
|
|
|
/**
|
2012-09-18 16:19:31 +00:00
|
|
|
* sd_setup_discard_cmnd - unmap blocks on thinly provisioned device
|
2010-06-18 14:59:42 +00:00
|
|
|
* @sdp: scsi device to operate one
|
2009-11-26 17:00:40 +00:00
|
|
|
* @rq: Request to prepare
|
|
|
|
*
|
|
|
|
* Will issue either UNMAP or WRITE SAME(16) depending on preference
|
|
|
|
* indicated by target device.
|
|
|
|
**/
|
2014-06-28 10:35:13 +00:00
|
|
|
static int sd_setup_discard_cmnd(struct scsi_cmnd *cmd)
|
2009-11-26 17:00:40 +00:00
|
|
|
{
|
2014-06-28 10:35:13 +00:00
|
|
|
struct request *rq = cmd->request;
|
|
|
|
struct scsi_device *sdp = cmd->device;
|
2009-11-26 17:00:40 +00:00
|
|
|
struct scsi_disk *sdkp = scsi_disk(rq->rq_disk);
|
2012-09-18 16:19:31 +00:00
|
|
|
sector_t sector = blk_rq_pos(rq);
|
|
|
|
unsigned int nr_sectors = blk_rq_sectors(rq);
|
|
|
|
unsigned int nr_bytes = blk_rq_bytes(rq);
|
2010-06-18 14:59:42 +00:00
|
|
|
unsigned int len;
|
2010-07-01 10:49:18 +00:00
|
|
|
int ret;
|
2011-03-08 07:07:15 +00:00
|
|
|
char *buf;
|
2010-06-18 14:59:42 +00:00
|
|
|
struct page *page;
|
2009-11-26 17:00:40 +00:00
|
|
|
|
2012-09-18 16:19:31 +00:00
|
|
|
sector >>= ilog2(sdp->sector_size) - 9;
|
|
|
|
nr_sectors >>= ilog2(sdp->sector_size) - 9;
|
2009-11-26 17:00:40 +00:00
|
|
|
|
2010-06-18 14:59:42 +00:00
|
|
|
page = alloc_page(GFP_ATOMIC | __GFP_ZERO);
|
|
|
|
if (!page)
|
|
|
|
return BLKPREP_DEFER;
|
|
|
|
|
2011-03-08 07:07:15 +00:00
|
|
|
switch (sdkp->provisioning_mode) {
|
|
|
|
case SD_LBP_UNMAP:
|
|
|
|
buf = page_address(page);
|
2009-11-26 17:00:40 +00:00
|
|
|
|
2014-06-28 10:35:13 +00:00
|
|
|
cmd->cmd_len = 10;
|
|
|
|
cmd->cmnd[0] = UNMAP;
|
|
|
|
cmd->cmnd[8] = 24;
|
2009-11-26 17:00:40 +00:00
|
|
|
|
|
|
|
put_unaligned_be16(6 + 16, &buf[0]);
|
|
|
|
put_unaligned_be16(16, &buf[2]);
|
|
|
|
put_unaligned_be64(sector, &buf[8]);
|
2010-06-18 14:59:42 +00:00
|
|
|
put_unaligned_be32(nr_sectors, &buf[16]);
|
2009-11-26 17:00:40 +00:00
|
|
|
|
2010-06-18 14:59:42 +00:00
|
|
|
len = 24;
|
2011-03-08 07:07:15 +00:00
|
|
|
break;
|
|
|
|
|
|
|
|
case SD_LBP_WS16:
|
2014-06-28 10:35:13 +00:00
|
|
|
cmd->cmd_len = 16;
|
|
|
|
cmd->cmnd[0] = WRITE_SAME_16;
|
|
|
|
cmd->cmnd[1] = 0x8; /* UNMAP */
|
|
|
|
put_unaligned_be64(sector, &cmd->cmnd[2]);
|
|
|
|
put_unaligned_be32(nr_sectors, &cmd->cmnd[10]);
|
2010-06-18 14:59:42 +00:00
|
|
|
|
|
|
|
len = sdkp->device->sector_size;
|
2011-03-08 07:07:15 +00:00
|
|
|
break;
|
|
|
|
|
|
|
|
case SD_LBP_WS10:
|
|
|
|
case SD_LBP_ZERO:
|
2014-06-28 10:35:13 +00:00
|
|
|
cmd->cmd_len = 10;
|
|
|
|
cmd->cmnd[0] = WRITE_SAME;
|
2011-03-08 07:07:15 +00:00
|
|
|
if (sdkp->provisioning_mode == SD_LBP_WS10)
|
2014-06-28 10:35:13 +00:00
|
|
|
cmd->cmnd[1] = 0x8; /* UNMAP */
|
|
|
|
put_unaligned_be32(sector, &cmd->cmnd[2]);
|
|
|
|
put_unaligned_be16(nr_sectors, &cmd->cmnd[7]);
|
2011-03-08 07:07:15 +00:00
|
|
|
|
|
|
|
len = sdkp->device->sector_size;
|
|
|
|
break;
|
|
|
|
|
|
|
|
default:
|
2011-03-22 04:27:42 +00:00
|
|
|
ret = BLKPREP_KILL;
|
2011-03-08 07:07:15 +00:00
|
|
|
goto out;
|
2009-11-26 17:00:40 +00:00
|
|
|
}
|
|
|
|
|
2014-04-17 03:37:30 +00:00
|
|
|
rq->completion_data = page;
|
2014-06-28 10:35:13 +00:00
|
|
|
rq->timeout = SD_TIMEOUT;
|
|
|
|
|
|
|
|
cmd->transfersize = len;
|
2014-06-28 14:18:59 +00:00
|
|
|
cmd->allowed = SD_MAX_RETRIES;
|
2014-06-28 10:35:13 +00:00
|
|
|
|
|
|
|
/*
|
|
|
|
* Initially __data_len is set to the amount of data that needs to be
|
|
|
|
* transferred to the target. This amount depends on whether WRITE SAME
|
|
|
|
* or UNMAP is being used. After the scatterlist has been mapped by
|
|
|
|
* scsi_init_io() we set __data_len to the size of the area to be
|
|
|
|
* discarded on disk. This allows us to report completion on the full
|
|
|
|
* amount of blocks described by the request.
|
|
|
|
*/
|
2010-06-18 14:59:42 +00:00
|
|
|
blk_add_request_payload(rq, page, len);
|
2014-09-06 01:20:23 +00:00
|
|
|
ret = scsi_init_io(cmd);
|
2012-09-18 16:19:31 +00:00
|
|
|
rq->__data_len = nr_bytes;
|
2011-03-08 07:07:15 +00:00
|
|
|
|
|
|
|
out:
|
2014-04-10 15:46:28 +00:00
|
|
|
if (ret != BLKPREP_OK)
|
2010-07-08 08:16:17 +00:00
|
|
|
__free_page(page);
|
2010-07-01 10:49:18 +00:00
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
2012-09-18 16:19:32 +00:00
|
|
|
static void sd_config_write_same(struct scsi_disk *sdkp)
|
|
|
|
{
|
|
|
|
struct request_queue *q = sdkp->disk->queue;
|
|
|
|
unsigned int logical_block_size = sdkp->device->sector_size;
|
|
|
|
|
|
|
|
if (sdkp->device->no_write_same) {
|
|
|
|
sdkp->max_ws_blocks = 0;
|
|
|
|
goto out;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Some devices can not handle block counts above 0xffff despite
|
|
|
|
* supporting WRITE SAME(16). Consequently we default to 64k
|
|
|
|
* blocks per I/O unless the device explicitly advertises a
|
|
|
|
* bigger limit.
|
|
|
|
*/
|
2013-06-07 02:15:55 +00:00
|
|
|
if (sdkp->max_ws_blocks > SD_MAX_WS10_BLOCKS)
|
|
|
|
sdkp->max_ws_blocks = min_not_zero(sdkp->max_ws_blocks,
|
|
|
|
(u32)SD_MAX_WS16_BLOCKS);
|
|
|
|
else if (sdkp->ws16 || sdkp->ws10 || sdkp->device->no_report_opcodes)
|
|
|
|
sdkp->max_ws_blocks = min_not_zero(sdkp->max_ws_blocks,
|
|
|
|
(u32)SD_MAX_WS10_BLOCKS);
|
|
|
|
else {
|
|
|
|
sdkp->device->no_write_same = 1;
|
|
|
|
sdkp->max_ws_blocks = 0;
|
|
|
|
}
|
2012-09-18 16:19:32 +00:00
|
|
|
|
|
|
|
out:
|
2013-06-07 02:15:55 +00:00
|
|
|
blk_queue_max_write_same_sectors(q, sdkp->max_ws_blocks *
|
|
|
|
(logical_block_size >> 9));
|
2012-09-18 16:19:32 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
/**
|
|
|
|
* sd_setup_write_same_cmnd - write the same data to multiple blocks
|
2014-06-28 10:22:22 +00:00
|
|
|
* @cmd: command to prepare
|
2012-09-18 16:19:32 +00:00
|
|
|
*
|
|
|
|
* Will issue either WRITE SAME(10) or WRITE SAME(16) depending on
|
|
|
|
* preference indicated by target device.
|
|
|
|
**/
|
2014-06-28 10:22:22 +00:00
|
|
|
static int sd_setup_write_same_cmnd(struct scsi_cmnd *cmd)
|
2012-09-18 16:19:32 +00:00
|
|
|
{
|
2014-06-28 10:22:22 +00:00
|
|
|
struct request *rq = cmd->request;
|
|
|
|
struct scsi_device *sdp = cmd->device;
|
2012-09-18 16:19:32 +00:00
|
|
|
struct scsi_disk *sdkp = scsi_disk(rq->rq_disk);
|
|
|
|
struct bio *bio = rq->bio;
|
|
|
|
sector_t sector = blk_rq_pos(rq);
|
|
|
|
unsigned int nr_sectors = blk_rq_sectors(rq);
|
|
|
|
unsigned int nr_bytes = blk_rq_bytes(rq);
|
|
|
|
int ret;
|
|
|
|
|
|
|
|
if (sdkp->device->no_write_same)
|
|
|
|
return BLKPREP_KILL;
|
|
|
|
|
2013-08-07 21:24:32 +00:00
|
|
|
BUG_ON(bio_offset(bio) || bio_iovec(bio).bv_len != sdp->sector_size);
|
2012-09-18 16:19:32 +00:00
|
|
|
|
|
|
|
sector >>= ilog2(sdp->sector_size) - 9;
|
|
|
|
nr_sectors >>= ilog2(sdp->sector_size) - 9;
|
|
|
|
|
|
|
|
rq->timeout = SD_WRITE_SAME_TIMEOUT;
|
|
|
|
|
|
|
|
if (sdkp->ws16 || sector > 0xffffffff || nr_sectors > 0xffff) {
|
2014-06-28 10:22:22 +00:00
|
|
|
cmd->cmd_len = 16;
|
|
|
|
cmd->cmnd[0] = WRITE_SAME_16;
|
|
|
|
put_unaligned_be64(sector, &cmd->cmnd[2]);
|
|
|
|
put_unaligned_be32(nr_sectors, &cmd->cmnd[10]);
|
2012-09-18 16:19:32 +00:00
|
|
|
} else {
|
2014-06-28 10:22:22 +00:00
|
|
|
cmd->cmd_len = 10;
|
|
|
|
cmd->cmnd[0] = WRITE_SAME;
|
|
|
|
put_unaligned_be32(sector, &cmd->cmnd[2]);
|
|
|
|
put_unaligned_be16(nr_sectors, &cmd->cmnd[7]);
|
2012-09-18 16:19:32 +00:00
|
|
|
}
|
|
|
|
|
2014-06-28 10:22:22 +00:00
|
|
|
cmd->transfersize = sdp->sector_size;
|
2014-06-28 10:29:19 +00:00
|
|
|
cmd->allowed = SD_MAX_RETRIES;
|
2012-09-18 16:19:32 +00:00
|
|
|
|
2014-06-28 10:22:22 +00:00
|
|
|
/*
|
|
|
|
* For WRITE_SAME the data transferred in the DATA IN buffer is
|
|
|
|
* different from the amount of data actually written to the target.
|
|
|
|
*
|
|
|
|
* We set up __data_len to the amount of data transferred from the
|
|
|
|
* DATA IN buffer so that blk_rq_map_sg set up the proper S/G list
|
|
|
|
* to transfer a single sector of data first, but then reset it to
|
|
|
|
* the amount of data to be written right after so that the I/O path
|
|
|
|
* knows how much to actually write.
|
|
|
|
*/
|
|
|
|
rq->__data_len = sdp->sector_size;
|
2014-09-06 01:20:23 +00:00
|
|
|
ret = scsi_init_io(cmd);
|
2014-06-28 10:22:22 +00:00
|
|
|
rq->__data_len = nr_bytes;
|
2012-09-18 16:19:32 +00:00
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
2014-06-28 10:08:05 +00:00
|
|
|
static int sd_setup_flush_cmnd(struct scsi_cmnd *cmd)
|
2010-07-03 08:45:34 +00:00
|
|
|
{
|
2014-06-28 10:08:05 +00:00
|
|
|
struct request *rq = cmd->request;
|
|
|
|
|
|
|
|
/* flush requests don't perform I/O, zero the S/G table */
|
|
|
|
memset(&cmd->sdb, 0, sizeof(cmd->sdb));
|
2010-07-03 08:45:34 +00:00
|
|
|
|
2014-06-28 10:08:05 +00:00
|
|
|
cmd->cmnd[0] = SYNCHRONIZE_CACHE;
|
|
|
|
cmd->cmd_len = 10;
|
|
|
|
cmd->transfersize = 0;
|
|
|
|
cmd->allowed = SD_MAX_RETRIES;
|
|
|
|
|
2014-07-18 15:11:27 +00:00
|
|
|
rq->timeout = rq->q->rq_timeout * SD_FLUSH_TIMEOUT_MULTIPLIER;
|
2014-06-28 10:08:05 +00:00
|
|
|
return BLKPREP_OK;
|
2010-07-03 08:45:34 +00:00
|
|
|
}
|
|
|
|
|
2014-06-28 10:40:18 +00:00
|
|
|
static int sd_setup_read_write_cmnd(struct scsi_cmnd *SCpnt)
|
2005-04-16 22:20:36 +00:00
|
|
|
{
|
2014-05-01 14:51:04 +00:00
|
|
|
struct request *rq = SCpnt->request;
|
|
|
|
struct scsi_device *sdp = SCpnt->device;
|
2006-01-06 17:34:07 +00:00
|
|
|
struct gendisk *disk = rq->rq_disk;
|
2008-07-17 08:28:35 +00:00
|
|
|
struct scsi_disk *sdkp;
|
2009-05-07 13:24:39 +00:00
|
|
|
sector_t block = blk_rq_pos(rq);
|
2008-08-06 04:42:21 +00:00
|
|
|
sector_t threshold;
|
2009-05-07 13:24:39 +00:00
|
|
|
unsigned int this_count = blk_rq_sectors(rq);
|
2014-09-26 23:20:08 +00:00
|
|
|
unsigned int dif, dix;
|
|
|
|
int ret;
|
2009-09-20 20:49:38 +00:00
|
|
|
unsigned char protect;
|
2007-08-04 15:06:25 +00:00
|
|
|
|
2014-09-06 01:20:23 +00:00
|
|
|
ret = scsi_init_io(SCpnt);
|
2007-08-04 15:06:25 +00:00
|
|
|
if (ret != BLKPREP_OK)
|
|
|
|
goto out;
|
|
|
|
SCpnt = rq->special;
|
2008-07-17 08:28:35 +00:00
|
|
|
sdkp = scsi_disk(disk);
|
2007-08-04 15:06:25 +00:00
|
|
|
|
|
|
|
/* from here on until we're complete, any goto out
|
|
|
|
* is used for a killable error condition */
|
|
|
|
ret = BLKPREP_KILL;
|
2005-04-16 22:20:36 +00:00
|
|
|
|
2014-05-01 14:51:04 +00:00
|
|
|
SCSI_LOG_HLQUEUE(1,
|
|
|
|
scmd_printk(KERN_INFO, SCpnt,
|
|
|
|
"%s: block=%llu, count=%d\n",
|
|
|
|
__func__, (unsigned long long)block, this_count));
|
2005-04-16 22:20:36 +00:00
|
|
|
|
|
|
|
if (!sdp || !scsi_device_online(sdp) ||
|
2009-05-07 13:24:39 +00:00
|
|
|
block + blk_rq_sectors(rq) > get_capacity(disk)) {
|
2007-02-28 03:41:19 +00:00
|
|
|
SCSI_LOG_HLQUEUE(2, scmd_printk(KERN_INFO, SCpnt,
|
2009-05-07 13:24:39 +00:00
|
|
|
"Finishing %u sectors\n",
|
|
|
|
blk_rq_sectors(rq)));
|
2007-02-28 03:41:19 +00:00
|
|
|
SCSI_LOG_HLQUEUE(2, scmd_printk(KERN_INFO, SCpnt,
|
|
|
|
"Retry with 0x%p\n", SCpnt));
|
2007-08-04 15:06:25 +00:00
|
|
|
goto out;
|
2005-04-16 22:20:36 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
if (sdp->changed) {
|
|
|
|
/*
|
|
|
|
* quietly refuse to do anything to a changed disc until
|
|
|
|
* the changed bit has been reset
|
|
|
|
*/
|
2010-09-07 15:44:01 +00:00
|
|
|
/* printk("SCSI disk has been changed or is not present. Prohibiting further I/O.\n"); */
|
2007-08-04 15:06:25 +00:00
|
|
|
goto out;
|
2005-04-16 22:20:36 +00:00
|
|
|
}
|
2007-08-04 15:06:25 +00:00
|
|
|
|
2008-01-20 10:12:26 +00:00
|
|
|
/*
|
2008-08-06 04:42:21 +00:00
|
|
|
* Some SD card readers can't handle multi-sector accesses which touch
|
|
|
|
* the last one or two hardware sectors. Split accesses as needed.
|
2008-01-20 10:12:26 +00:00
|
|
|
*/
|
2008-08-06 04:42:21 +00:00
|
|
|
threshold = get_capacity(disk) - SD_LAST_BUGGY_SECTORS *
|
|
|
|
(sdp->sector_size / 512);
|
|
|
|
|
|
|
|
if (unlikely(sdp->last_sector_bug && block + this_count > threshold)) {
|
|
|
|
if (block < threshold) {
|
|
|
|
/* Access up to the threshold but not beyond */
|
|
|
|
this_count = threshold - block;
|
|
|
|
} else {
|
|
|
|
/* Access only a single hardware sector */
|
|
|
|
this_count = sdp->sector_size / 512;
|
|
|
|
}
|
|
|
|
}
|
2008-01-20 10:12:26 +00:00
|
|
|
|
2007-02-28 03:41:19 +00:00
|
|
|
SCSI_LOG_HLQUEUE(2, scmd_printk(KERN_INFO, SCpnt, "block=%llu\n",
|
|
|
|
(unsigned long long)block));
|
2005-04-16 22:20:36 +00:00
|
|
|
|
|
|
|
/*
|
|
|
|
* If we have a 1K hardware sectorsize, prevent access to single
|
|
|
|
* 512 byte sectors. In theory we could handle this - in fact
|
|
|
|
* the scsi cdrom driver must be able to handle this because
|
|
|
|
* we typically use 1K blocksizes, and cdroms typically have
|
|
|
|
* 2K hardware sectorsizes. Of course, things are simpler
|
|
|
|
* with the cdrom, since it is read-only. For performance
|
|
|
|
* reasons, the filesystems should be able to handle this
|
|
|
|
* and not force the scsi disk driver to use bounce buffers
|
|
|
|
* for this.
|
|
|
|
*/
|
|
|
|
if (sdp->sector_size == 1024) {
|
2009-05-07 13:24:39 +00:00
|
|
|
if ((block & 1) || (blk_rq_sectors(rq) & 1)) {
|
2007-02-28 03:40:55 +00:00
|
|
|
scmd_printk(KERN_ERR, SCpnt,
|
|
|
|
"Bad block number requested\n");
|
2007-08-04 15:06:25 +00:00
|
|
|
goto out;
|
2005-04-16 22:20:36 +00:00
|
|
|
} else {
|
|
|
|
block = block >> 1;
|
|
|
|
this_count = this_count >> 1;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
if (sdp->sector_size == 2048) {
|
2009-05-07 13:24:39 +00:00
|
|
|
if ((block & 3) || (blk_rq_sectors(rq) & 3)) {
|
2007-02-28 03:40:55 +00:00
|
|
|
scmd_printk(KERN_ERR, SCpnt,
|
|
|
|
"Bad block number requested\n");
|
2007-08-04 15:06:25 +00:00
|
|
|
goto out;
|
2005-04-16 22:20:36 +00:00
|
|
|
} else {
|
|
|
|
block = block >> 2;
|
|
|
|
this_count = this_count >> 2;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
if (sdp->sector_size == 4096) {
|
2009-05-07 13:24:39 +00:00
|
|
|
if ((block & 7) || (blk_rq_sectors(rq) & 7)) {
|
2007-02-28 03:40:55 +00:00
|
|
|
scmd_printk(KERN_ERR, SCpnt,
|
|
|
|
"Bad block number requested\n");
|
2007-08-04 15:06:25 +00:00
|
|
|
goto out;
|
2005-04-16 22:20:36 +00:00
|
|
|
} else {
|
|
|
|
block = block >> 3;
|
|
|
|
this_count = this_count >> 3;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
if (rq_data_dir(rq) == WRITE) {
|
|
|
|
SCpnt->cmnd[0] = WRITE_6;
|
2008-07-17 08:28:35 +00:00
|
|
|
|
2012-08-28 18:29:33 +00:00
|
|
|
if (blk_integrity_rq(rq))
|
2014-09-26 23:20:08 +00:00
|
|
|
sd_dif_prepare(SCpnt);
|
2008-07-17 08:28:35 +00:00
|
|
|
|
2005-04-16 22:20:36 +00:00
|
|
|
} else if (rq_data_dir(rq) == READ) {
|
|
|
|
SCpnt->cmnd[0] = READ_6;
|
|
|
|
} else {
|
2013-05-23 10:25:08 +00:00
|
|
|
scmd_printk(KERN_ERR, SCpnt, "Unknown command %llx\n", (unsigned long long) rq->cmd_flags);
|
2007-08-04 15:06:25 +00:00
|
|
|
goto out;
|
2005-04-16 22:20:36 +00:00
|
|
|
}
|
|
|
|
|
2007-02-28 03:41:19 +00:00
|
|
|
SCSI_LOG_HLQUEUE(2, scmd_printk(KERN_INFO, SCpnt,
|
2009-05-07 13:24:39 +00:00
|
|
|
"%s %d/%u 512 byte blocks.\n",
|
2007-02-28 03:41:19 +00:00
|
|
|
(rq_data_dir(rq) == WRITE) ?
|
|
|
|
"writing" : "reading", this_count,
|
2009-05-07 13:24:39 +00:00
|
|
|
blk_rq_sectors(rq)));
|
2005-04-16 22:20:36 +00:00
|
|
|
|
2014-09-26 23:20:08 +00:00
|
|
|
dix = scsi_prot_sg_count(SCpnt);
|
|
|
|
dif = scsi_host_dif_capable(SCpnt->device->host, sdkp->protection_type);
|
|
|
|
|
|
|
|
if (dif || dix)
|
|
|
|
protect = sd_setup_protect_cmnd(SCpnt, dix, dif);
|
2008-07-17 08:28:35 +00:00
|
|
|
else
|
2009-09-20 20:49:38 +00:00
|
|
|
protect = 0;
|
|
|
|
|
2014-09-26 23:20:08 +00:00
|
|
|
if (protect && sdkp->protection_type == SD_DIF_TYPE2_PROTECTION) {
|
2009-09-20 20:49:38 +00:00
|
|
|
SCpnt->cmnd = mempool_alloc(sd_cdb_pool, GFP_ATOMIC);
|
|
|
|
|
|
|
|
if (unlikely(SCpnt->cmnd == NULL)) {
|
|
|
|
ret = BLKPREP_DEFER;
|
|
|
|
goto out;
|
|
|
|
}
|
2008-07-17 08:28:35 +00:00
|
|
|
|
2009-09-20 20:49:38 +00:00
|
|
|
SCpnt->cmd_len = SD_EXT_CDB_SIZE;
|
|
|
|
memset(SCpnt->cmnd, 0, SCpnt->cmd_len);
|
|
|
|
SCpnt->cmnd[0] = VARIABLE_LENGTH_CMD;
|
|
|
|
SCpnt->cmnd[7] = 0x18;
|
|
|
|
SCpnt->cmnd[9] = (rq_data_dir(rq) == READ) ? READ_32 : WRITE_32;
|
2010-08-07 16:17:56 +00:00
|
|
|
SCpnt->cmnd[10] = protect | ((rq->cmd_flags & REQ_FUA) ? 0x8 : 0);
|
2009-09-20 20:49:38 +00:00
|
|
|
|
|
|
|
/* LBA */
|
|
|
|
SCpnt->cmnd[12] = sizeof(block) > 4 ? (unsigned char) (block >> 56) & 0xff : 0;
|
|
|
|
SCpnt->cmnd[13] = sizeof(block) > 4 ? (unsigned char) (block >> 48) & 0xff : 0;
|
|
|
|
SCpnt->cmnd[14] = sizeof(block) > 4 ? (unsigned char) (block >> 40) & 0xff : 0;
|
|
|
|
SCpnt->cmnd[15] = sizeof(block) > 4 ? (unsigned char) (block >> 32) & 0xff : 0;
|
|
|
|
SCpnt->cmnd[16] = (unsigned char) (block >> 24) & 0xff;
|
|
|
|
SCpnt->cmnd[17] = (unsigned char) (block >> 16) & 0xff;
|
|
|
|
SCpnt->cmnd[18] = (unsigned char) (block >> 8) & 0xff;
|
|
|
|
SCpnt->cmnd[19] = (unsigned char) block & 0xff;
|
|
|
|
|
|
|
|
/* Expected Indirect LBA */
|
|
|
|
SCpnt->cmnd[20] = (unsigned char) (block >> 24) & 0xff;
|
|
|
|
SCpnt->cmnd[21] = (unsigned char) (block >> 16) & 0xff;
|
|
|
|
SCpnt->cmnd[22] = (unsigned char) (block >> 8) & 0xff;
|
|
|
|
SCpnt->cmnd[23] = (unsigned char) block & 0xff;
|
|
|
|
|
|
|
|
/* Transfer length */
|
|
|
|
SCpnt->cmnd[28] = (unsigned char) (this_count >> 24) & 0xff;
|
|
|
|
SCpnt->cmnd[29] = (unsigned char) (this_count >> 16) & 0xff;
|
|
|
|
SCpnt->cmnd[30] = (unsigned char) (this_count >> 8) & 0xff;
|
|
|
|
SCpnt->cmnd[31] = (unsigned char) this_count & 0xff;
|
2014-06-02 13:56:47 +00:00
|
|
|
} else if (sdp->use_16_for_rw || (this_count > 0xffff)) {
|
2005-04-16 22:20:36 +00:00
|
|
|
SCpnt->cmnd[0] += READ_16 - READ_6;
|
2010-08-07 16:17:56 +00:00
|
|
|
SCpnt->cmnd[1] = protect | ((rq->cmd_flags & REQ_FUA) ? 0x8 : 0);
|
2005-04-16 22:20:36 +00:00
|
|
|
SCpnt->cmnd[2] = sizeof(block) > 4 ? (unsigned char) (block >> 56) & 0xff : 0;
|
|
|
|
SCpnt->cmnd[3] = sizeof(block) > 4 ? (unsigned char) (block >> 48) & 0xff : 0;
|
|
|
|
SCpnt->cmnd[4] = sizeof(block) > 4 ? (unsigned char) (block >> 40) & 0xff : 0;
|
|
|
|
SCpnt->cmnd[5] = sizeof(block) > 4 ? (unsigned char) (block >> 32) & 0xff : 0;
|
|
|
|
SCpnt->cmnd[6] = (unsigned char) (block >> 24) & 0xff;
|
|
|
|
SCpnt->cmnd[7] = (unsigned char) (block >> 16) & 0xff;
|
|
|
|
SCpnt->cmnd[8] = (unsigned char) (block >> 8) & 0xff;
|
|
|
|
SCpnt->cmnd[9] = (unsigned char) block & 0xff;
|
|
|
|
SCpnt->cmnd[10] = (unsigned char) (this_count >> 24) & 0xff;
|
|
|
|
SCpnt->cmnd[11] = (unsigned char) (this_count >> 16) & 0xff;
|
|
|
|
SCpnt->cmnd[12] = (unsigned char) (this_count >> 8) & 0xff;
|
|
|
|
SCpnt->cmnd[13] = (unsigned char) this_count & 0xff;
|
|
|
|
SCpnt->cmnd[14] = SCpnt->cmnd[15] = 0;
|
|
|
|
} else if ((this_count > 0xff) || (block > 0x1fffff) ||
|
2008-07-17 08:28:35 +00:00
|
|
|
scsi_device_protection(SCpnt->device) ||
|
2005-04-16 22:20:36 +00:00
|
|
|
SCpnt->device->use_10_for_rw) {
|
|
|
|
SCpnt->cmnd[0] += READ_10 - READ_6;
|
2010-08-07 16:17:56 +00:00
|
|
|
SCpnt->cmnd[1] = protect | ((rq->cmd_flags & REQ_FUA) ? 0x8 : 0);
|
2005-04-16 22:20:36 +00:00
|
|
|
SCpnt->cmnd[2] = (unsigned char) (block >> 24) & 0xff;
|
|
|
|
SCpnt->cmnd[3] = (unsigned char) (block >> 16) & 0xff;
|
|
|
|
SCpnt->cmnd[4] = (unsigned char) (block >> 8) & 0xff;
|
|
|
|
SCpnt->cmnd[5] = (unsigned char) block & 0xff;
|
|
|
|
SCpnt->cmnd[6] = SCpnt->cmnd[9] = 0;
|
|
|
|
SCpnt->cmnd[7] = (unsigned char) (this_count >> 8) & 0xff;
|
|
|
|
SCpnt->cmnd[8] = (unsigned char) this_count & 0xff;
|
|
|
|
} else {
|
2010-08-07 16:17:56 +00:00
|
|
|
if (unlikely(rq->cmd_flags & REQ_FUA)) {
|
2006-01-06 08:53:52 +00:00
|
|
|
/*
|
|
|
|
* This happens only if this drive failed
|
|
|
|
* 10byte rw command with ILLEGAL_REQUEST
|
|
|
|
* during operation and thus turned off
|
|
|
|
* use_10_for_rw.
|
|
|
|
*/
|
2007-02-28 03:40:55 +00:00
|
|
|
scmd_printk(KERN_ERR, SCpnt,
|
|
|
|
"FUA write on READ/WRITE(6) drive\n");
|
2007-08-04 15:06:25 +00:00
|
|
|
goto out;
|
2006-01-06 08:53:52 +00:00
|
|
|
}
|
|
|
|
|
2005-04-16 22:20:36 +00:00
|
|
|
SCpnt->cmnd[1] |= (unsigned char) ((block >> 16) & 0x1f);
|
|
|
|
SCpnt->cmnd[2] = (unsigned char) ((block >> 8) & 0xff);
|
|
|
|
SCpnt->cmnd[3] = (unsigned char) block & 0xff;
|
|
|
|
SCpnt->cmnd[4] = (unsigned char) this_count;
|
|
|
|
SCpnt->cmnd[5] = 0;
|
|
|
|
}
|
2007-12-13 11:47:40 +00:00
|
|
|
SCpnt->sdb.length = this_count * sdp->sector_size;
|
2005-04-16 22:20:36 +00:00
|
|
|
|
|
|
|
/*
|
|
|
|
* We shouldn't disconnect in the middle of a sector, so with a dumb
|
|
|
|
* host adapter, it's safe to assume that we can at least transfer
|
|
|
|
* this many bytes between each connect / disconnect.
|
|
|
|
*/
|
|
|
|
SCpnt->transfersize = sdp->sector_size;
|
|
|
|
SCpnt->underflow = this_count << 9;
|
|
|
|
SCpnt->allowed = SD_MAX_RETRIES;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* This indicates that the command is ready from our end to be
|
|
|
|
* queued.
|
|
|
|
*/
|
2007-08-04 15:06:25 +00:00
|
|
|
ret = BLKPREP_OK;
|
|
|
|
out:
|
2014-05-01 14:51:04 +00:00
|
|
|
return ret;
|
2005-04-16 22:20:36 +00:00
|
|
|
}
|
|
|
|
|
2014-06-28 10:40:18 +00:00
|
|
|
static int sd_init_command(struct scsi_cmnd *cmd)
|
|
|
|
{
|
|
|
|
struct request *rq = cmd->request;
|
|
|
|
|
|
|
|
if (rq->cmd_flags & REQ_DISCARD)
|
|
|
|
return sd_setup_discard_cmnd(cmd);
|
|
|
|
else if (rq->cmd_flags & REQ_WRITE_SAME)
|
|
|
|
return sd_setup_write_same_cmnd(cmd);
|
|
|
|
else if (rq->cmd_flags & REQ_FLUSH)
|
|
|
|
return sd_setup_flush_cmnd(cmd);
|
|
|
|
else
|
|
|
|
return sd_setup_read_write_cmnd(cmd);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void sd_uninit_command(struct scsi_cmnd *SCpnt)
|
|
|
|
{
|
|
|
|
struct request *rq = SCpnt->request;
|
|
|
|
|
|
|
|
if (rq->cmd_flags & REQ_DISCARD)
|
|
|
|
__free_page(rq->completion_data);
|
|
|
|
|
|
|
|
if (SCpnt->cmnd != rq->cmd) {
|
|
|
|
mempool_free(SCpnt->cmnd, sd_cdb_pool);
|
|
|
|
SCpnt->cmnd = NULL;
|
|
|
|
SCpnt->cmd_len = 0;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2005-04-16 22:20:36 +00:00
|
|
|
/**
|
|
|
|
* sd_open - open a scsi disk device
|
|
|
|
* @inode: only i_rdev member may be used
|
|
|
|
* @filp: only f_mode and f_flags may be used
|
|
|
|
*
|
|
|
|
* Returns 0 if successful. Returns a negated errno value in case
|
|
|
|
* of error.
|
|
|
|
*
|
|
|
|
* Note: This can be called from a user context (e.g. fsck(1) )
|
|
|
|
* or from within the kernel (e.g. as a result of a mount(1) ).
|
|
|
|
* In the latter case @inode and @filp carry an abridged amount
|
|
|
|
* of information as noted above.
|
2010-07-07 14:51:29 +00:00
|
|
|
*
|
|
|
|
* Locking: called with bdev->bd_mutex held.
|
2005-04-16 22:20:36 +00:00
|
|
|
**/
|
2008-03-02 15:41:04 +00:00
|
|
|
static int sd_open(struct block_device *bdev, fmode_t mode)
|
2005-04-16 22:20:36 +00:00
|
|
|
{
|
2008-03-02 15:41:04 +00:00
|
|
|
struct scsi_disk *sdkp = scsi_disk_get(bdev->bd_disk);
|
2005-04-16 22:20:36 +00:00
|
|
|
struct scsi_device *sdev;
|
|
|
|
int retval;
|
|
|
|
|
2008-03-02 15:41:04 +00:00
|
|
|
if (!sdkp)
|
2005-04-16 22:20:36 +00:00
|
|
|
return -ENXIO;
|
|
|
|
|
2007-02-28 03:41:19 +00:00
|
|
|
SCSI_LOG_HLQUEUE(3, sd_printk(KERN_INFO, sdkp, "sd_open\n"));
|
2005-04-16 22:20:36 +00:00
|
|
|
|
|
|
|
sdev = sdkp->device;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* If the device is in error recovery, wait until it is done.
|
|
|
|
* If the device is offline, then disallow any access to it.
|
|
|
|
*/
|
|
|
|
retval = -ENXIO;
|
|
|
|
if (!scsi_block_when_processing_errors(sdev))
|
|
|
|
goto error_out;
|
|
|
|
|
|
|
|
if (sdev->removable || sdkp->write_prot)
|
2008-03-02 15:41:04 +00:00
|
|
|
check_disk_change(bdev);
|
2005-04-16 22:20:36 +00:00
|
|
|
|
|
|
|
/*
|
|
|
|
* If the drive is empty, just let the open fail.
|
|
|
|
*/
|
|
|
|
retval = -ENOMEDIUM;
|
2008-03-02 15:41:04 +00:00
|
|
|
if (sdev->removable && !sdkp->media_present && !(mode & FMODE_NDELAY))
|
2005-04-16 22:20:36 +00:00
|
|
|
goto error_out;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* If the device has the write protect tab set, have the open fail
|
|
|
|
* if the user expects to be able to write to the thing.
|
|
|
|
*/
|
|
|
|
retval = -EROFS;
|
2008-03-02 15:41:04 +00:00
|
|
|
if (sdkp->write_prot && (mode & FMODE_WRITE))
|
2005-04-16 22:20:36 +00:00
|
|
|
goto error_out;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* It is possible that the disk changing stuff resulted in
|
|
|
|
* the device being taken offline. If this is the case,
|
|
|
|
* report this to the user, and don't pretend that the
|
|
|
|
* open actually succeeded.
|
|
|
|
*/
|
|
|
|
retval = -ENXIO;
|
|
|
|
if (!scsi_device_online(sdev))
|
|
|
|
goto error_out;
|
|
|
|
|
2010-07-07 14:51:29 +00:00
|
|
|
if ((atomic_inc_return(&sdkp->openers) == 1) && sdev->removable) {
|
2005-04-16 22:20:36 +00:00
|
|
|
if (scsi_block_when_processing_errors(sdev))
|
|
|
|
scsi_set_medium_removal(sdev, SCSI_REMOVAL_PREVENT);
|
|
|
|
}
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
|
|
|
|
error_out:
|
|
|
|
scsi_disk_put(sdkp);
|
|
|
|
return retval;
|
|
|
|
}
|
|
|
|
|
|
|
|
/**
|
|
|
|
* sd_release - invoked when the (last) close(2) is called on this
|
|
|
|
* scsi disk.
|
|
|
|
* @inode: only i_rdev member may be used
|
|
|
|
* @filp: only f_mode and f_flags may be used
|
|
|
|
*
|
|
|
|
* Returns 0.
|
|
|
|
*
|
|
|
|
* Note: may block (uninterruptible) if error recovery is underway
|
|
|
|
* on this disk.
|
2010-07-07 14:51:29 +00:00
|
|
|
*
|
|
|
|
* Locking: called with bdev->bd_mutex held.
|
2005-04-16 22:20:36 +00:00
|
|
|
**/
|
2013-05-06 01:52:57 +00:00
|
|
|
static void sd_release(struct gendisk *disk, fmode_t mode)
|
2005-04-16 22:20:36 +00:00
|
|
|
{
|
|
|
|
struct scsi_disk *sdkp = scsi_disk(disk);
|
|
|
|
struct scsi_device *sdev = sdkp->device;
|
|
|
|
|
2007-03-11 17:25:33 +00:00
|
|
|
SCSI_LOG_HLQUEUE(3, sd_printk(KERN_INFO, sdkp, "sd_release\n"));
|
2005-04-16 22:20:36 +00:00
|
|
|
|
2010-09-07 15:27:52 +00:00
|
|
|
if (atomic_dec_return(&sdkp->openers) == 0 && sdev->removable) {
|
2005-04-16 22:20:36 +00:00
|
|
|
if (scsi_block_when_processing_errors(sdev))
|
|
|
|
scsi_set_medium_removal(sdev, SCSI_REMOVAL_ALLOW);
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* XXX and what if there are packets in flight and this close()
|
|
|
|
* XXX is followed by a "rmmod sd_mod"?
|
|
|
|
*/
|
2010-06-16 18:52:17 +00:00
|
|
|
|
2005-04-16 22:20:36 +00:00
|
|
|
scsi_disk_put(sdkp);
|
|
|
|
}
|
|
|
|
|
2006-01-08 09:02:50 +00:00
|
|
|
static int sd_getgeo(struct block_device *bdev, struct hd_geometry *geo)
|
2005-04-16 22:20:36 +00:00
|
|
|
{
|
|
|
|
struct scsi_disk *sdkp = scsi_disk(bdev->bd_disk);
|
|
|
|
struct scsi_device *sdp = sdkp->device;
|
|
|
|
struct Scsi_Host *host = sdp->host;
|
|
|
|
int diskinfo[4];
|
|
|
|
|
|
|
|
/* default to most commonly used values */
|
|
|
|
diskinfo[0] = 0x40; /* 1 << 6 */
|
|
|
|
diskinfo[1] = 0x20; /* 1 << 5 */
|
|
|
|
diskinfo[2] = sdkp->capacity >> 11;
|
|
|
|
|
|
|
|
/* override with calculated, extended default, or driver values */
|
|
|
|
if (host->hostt->bios_param)
|
|
|
|
host->hostt->bios_param(sdp, bdev, sdkp->capacity, diskinfo);
|
|
|
|
else
|
|
|
|
scsicam_bios_param(bdev, sdkp->capacity, diskinfo);
|
|
|
|
|
2006-01-08 09:02:50 +00:00
|
|
|
geo->heads = diskinfo[0];
|
|
|
|
geo->sectors = diskinfo[1];
|
|
|
|
geo->cylinders = diskinfo[2];
|
2005-04-16 22:20:36 +00:00
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
/**
|
|
|
|
* sd_ioctl - process an ioctl
|
|
|
|
* @inode: only i_rdev/i_bdev members may be used
|
|
|
|
* @filp: only f_mode and f_flags may be used
|
|
|
|
* @cmd: ioctl command number
|
|
|
|
* @arg: this is third argument given to ioctl(2) system call.
|
|
|
|
* Often contains a pointer.
|
|
|
|
*
|
2011-03-31 01:57:33 +00:00
|
|
|
* Returns 0 if successful (some ioctls return positive numbers on
|
2005-04-16 22:20:36 +00:00
|
|
|
* success as well). Returns a negated errno value in case of error.
|
|
|
|
*
|
|
|
|
* Note: most ioctls are forward onto the block subsystem or further
|
2007-10-19 21:10:43 +00:00
|
|
|
* down in the scsi subsystem.
|
2005-04-16 22:20:36 +00:00
|
|
|
**/
|
2008-03-02 15:41:04 +00:00
|
|
|
static int sd_ioctl(struct block_device *bdev, fmode_t mode,
|
2005-04-16 22:20:36 +00:00
|
|
|
unsigned int cmd, unsigned long arg)
|
|
|
|
{
|
|
|
|
struct gendisk *disk = bdev->bd_disk;
|
2011-08-25 09:04:14 +00:00
|
|
|
struct scsi_disk *sdkp = scsi_disk(disk);
|
|
|
|
struct scsi_device *sdp = sdkp->device;
|
2005-04-16 22:20:36 +00:00
|
|
|
void __user *p = (void __user *)arg;
|
|
|
|
int error;
|
|
|
|
|
2011-08-25 09:04:14 +00:00
|
|
|
SCSI_LOG_IOCTL(1, sd_printk(KERN_INFO, sdkp, "sd_ioctl: disk=%s, "
|
|
|
|
"cmd=0x%x\n", disk->disk_name, cmd));
|
2005-04-16 22:20:36 +00:00
|
|
|
|
2012-01-12 15:01:28 +00:00
|
|
|
error = scsi_verify_blk_ioctl(bdev, cmd);
|
|
|
|
if (error < 0)
|
|
|
|
return error;
|
|
|
|
|
2005-04-16 22:20:36 +00:00
|
|
|
/*
|
|
|
|
* If we are in the middle of error recovery, don't let anyone
|
|
|
|
* else try and use this device. Also, if error recovery fails, it
|
|
|
|
* may try and take the device offline, in which case all further
|
|
|
|
* access to the device is prohibited.
|
|
|
|
*/
|
2014-10-11 14:25:31 +00:00
|
|
|
error = scsi_ioctl_block_when_processing_errors(sdp, cmd,
|
|
|
|
(mode & FMODE_NDELAY) != 0);
|
|
|
|
if (error)
|
2010-07-08 08:18:46 +00:00
|
|
|
goto out;
|
2005-04-16 22:20:36 +00:00
|
|
|
|
|
|
|
/*
|
|
|
|
* Send SCSI addressing ioctls directly to mid level, send other
|
|
|
|
* ioctls to block level and then onto mid level if they can't be
|
|
|
|
* resolved.
|
|
|
|
*/
|
|
|
|
switch (cmd) {
|
|
|
|
case SCSI_IOCTL_GET_IDLUN:
|
|
|
|
case SCSI_IOCTL_GET_BUS_NUMBER:
|
2010-07-08 08:18:46 +00:00
|
|
|
error = scsi_ioctl(sdp, cmd, p);
|
|
|
|
break;
|
2005-04-16 22:20:36 +00:00
|
|
|
default:
|
2012-01-12 15:01:27 +00:00
|
|
|
error = scsi_cmd_blk_ioctl(bdev, mode, cmd, p);
|
2005-04-16 22:20:36 +00:00
|
|
|
if (error != -ENOTTY)
|
2010-07-08 08:18:46 +00:00
|
|
|
break;
|
|
|
|
error = scsi_ioctl(sdp, cmd, p);
|
|
|
|
break;
|
2005-04-16 22:20:36 +00:00
|
|
|
}
|
2010-07-08 08:18:46 +00:00
|
|
|
out:
|
|
|
|
return error;
|
2005-04-16 22:20:36 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
static void set_media_not_present(struct scsi_disk *sdkp)
|
|
|
|
{
|
2010-12-18 17:42:23 +00:00
|
|
|
if (sdkp->media_present)
|
|
|
|
sdkp->device->changed = 1;
|
|
|
|
|
|
|
|
if (sdkp->device->removable) {
|
|
|
|
sdkp->media_present = 0;
|
|
|
|
sdkp->capacity = 0;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
static int media_not_present(struct scsi_disk *sdkp,
|
|
|
|
struct scsi_sense_hdr *sshdr)
|
|
|
|
{
|
|
|
|
if (!scsi_sense_valid(sshdr))
|
|
|
|
return 0;
|
|
|
|
|
|
|
|
/* not invoked for commands that could return deferred errors */
|
|
|
|
switch (sshdr->sense_key) {
|
|
|
|
case UNIT_ATTENTION:
|
|
|
|
case NOT_READY:
|
|
|
|
/* medium not present */
|
|
|
|
if (sshdr->asc == 0x3A) {
|
|
|
|
set_media_not_present(sdkp);
|
|
|
|
return 1;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
return 0;
|
2005-04-16 22:20:36 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
/**
|
2010-12-18 17:42:23 +00:00
|
|
|
* sd_check_events - check media events
|
|
|
|
* @disk: kernel device descriptor
|
|
|
|
* @clearing: disk events currently being cleared
|
2005-04-16 22:20:36 +00:00
|
|
|
*
|
2010-12-18 17:42:23 +00:00
|
|
|
* Returns mask of DISK_EVENT_*.
|
2005-04-16 22:20:36 +00:00
|
|
|
*
|
|
|
|
* Note: this function is invoked from the block subsystem.
|
|
|
|
**/
|
2010-12-18 17:42:23 +00:00
|
|
|
static unsigned int sd_check_events(struct gendisk *disk, unsigned int clearing)
|
2005-04-16 22:20:36 +00:00
|
|
|
{
|
|
|
|
struct scsi_disk *sdkp = scsi_disk(disk);
|
|
|
|
struct scsi_device *sdp = sdkp->device;
|
2007-12-02 17:10:40 +00:00
|
|
|
struct scsi_sense_hdr *sshdr = NULL;
|
2005-04-16 22:20:36 +00:00
|
|
|
int retval;
|
|
|
|
|
2010-12-18 17:42:23 +00:00
|
|
|
SCSI_LOG_HLQUEUE(3, sd_printk(KERN_INFO, sdkp, "sd_check_events\n"));
|
2005-04-16 22:20:36 +00:00
|
|
|
|
|
|
|
/*
|
|
|
|
* If the device is offline, don't send any commands - just pretend as
|
|
|
|
* if the command failed. If the device ever comes back online, we
|
|
|
|
* can deal with it then. It is only because of unrecoverable errors
|
|
|
|
* that we would ever take a device offline in the first place.
|
|
|
|
*/
|
2007-08-14 12:10:39 +00:00
|
|
|
if (!scsi_device_online(sdp)) {
|
|
|
|
set_media_not_present(sdkp);
|
|
|
|
goto out;
|
|
|
|
}
|
2005-04-16 22:20:36 +00:00
|
|
|
|
|
|
|
/*
|
|
|
|
* Using TEST_UNIT_READY enables differentiation between drive with
|
|
|
|
* no cartridge loaded - NOT READY, drive with changed cartridge -
|
|
|
|
* UNIT ATTENTION, or with same cartridge - GOOD STATUS.
|
|
|
|
*
|
|
|
|
* Drives that auto spin down. eg iomega jaz 1G, will be started
|
|
|
|
* by sd_spinup_disk() from sd_revalidate_disk(), which happens whenever
|
|
|
|
* sd_revalidate() is called.
|
|
|
|
*/
|
|
|
|
retval = -ENODEV;
|
2007-08-14 12:10:39 +00:00
|
|
|
|
2007-12-02 17:10:40 +00:00
|
|
|
if (scsi_block_when_processing_errors(sdp)) {
|
|
|
|
sshdr = kzalloc(sizeof(*sshdr), GFP_KERNEL);
|
|
|
|
retval = scsi_test_unit_ready(sdp, SD_TIMEOUT, SD_MAX_RETRIES,
|
|
|
|
sshdr);
|
|
|
|
}
|
2005-04-16 22:20:36 +00:00
|
|
|
|
2010-12-18 17:42:23 +00:00
|
|
|
/* failed to execute TUR, assume media not present */
|
|
|
|
if (host_byte(retval)) {
|
2007-08-14 12:10:39 +00:00
|
|
|
set_media_not_present(sdkp);
|
|
|
|
goto out;
|
|
|
|
}
|
2005-04-16 22:20:36 +00:00
|
|
|
|
2010-12-18 17:42:23 +00:00
|
|
|
if (media_not_present(sdkp, sshdr))
|
|
|
|
goto out;
|
|
|
|
|
2005-04-16 22:20:36 +00:00
|
|
|
/*
|
|
|
|
* For removable scsi disk we have to recognise the presence
|
2010-12-18 17:42:23 +00:00
|
|
|
* of a disk in the drive.
|
2005-04-16 22:20:36 +00:00
|
|
|
*/
|
2010-12-18 17:42:23 +00:00
|
|
|
if (!sdkp->media_present)
|
|
|
|
sdp->changed = 1;
|
2005-04-16 22:20:36 +00:00
|
|
|
sdkp->media_present = 1;
|
2007-08-14 12:10:39 +00:00
|
|
|
out:
|
2010-09-07 15:44:01 +00:00
|
|
|
/*
|
2010-12-18 17:42:23 +00:00
|
|
|
* sdp->changed is set under the following conditions:
|
2010-09-07 15:44:01 +00:00
|
|
|
*
|
2010-12-18 17:42:23 +00:00
|
|
|
* Medium present state has changed in either direction.
|
|
|
|
* Device has indicated UNIT_ATTENTION.
|
2010-09-07 15:44:01 +00:00
|
|
|
*/
|
2007-12-02 17:10:40 +00:00
|
|
|
kfree(sshdr);
|
2010-12-18 17:42:23 +00:00
|
|
|
retval = sdp->changed ? DISK_EVENT_MEDIA_CHANGE : 0;
|
|
|
|
sdp->changed = 0;
|
2005-04-16 22:20:36 +00:00
|
|
|
return retval;
|
|
|
|
}
|
|
|
|
|
2007-02-28 03:40:55 +00:00
|
|
|
static int sd_sync_cache(struct scsi_disk *sdkp)
|
2005-04-16 22:20:36 +00:00
|
|
|
{
|
|
|
|
int retries, res;
|
2007-02-28 03:40:55 +00:00
|
|
|
struct scsi_device *sdp = sdkp->device;
|
2013-10-04 21:42:24 +00:00
|
|
|
const int timeout = sdp->request_queue->rq_timeout
|
|
|
|
* SD_FLUSH_TIMEOUT_MULTIPLIER;
|
2005-08-28 16:33:52 +00:00
|
|
|
struct scsi_sense_hdr sshdr;
|
2005-04-16 22:20:36 +00:00
|
|
|
|
|
|
|
if (!scsi_device_online(sdp))
|
|
|
|
return -ENODEV;
|
|
|
|
|
|
|
|
for (retries = 3; retries > 0; --retries) {
|
|
|
|
unsigned char cmd[10] = { 0 };
|
|
|
|
|
|
|
|
cmd[0] = SYNCHRONIZE_CACHE;
|
|
|
|
/*
|
|
|
|
* Leave the rest of the command zero to indicate
|
|
|
|
* flush everything.
|
|
|
|
*/
|
2013-03-23 03:42:25 +00:00
|
|
|
res = scsi_execute_req_flags(sdp, cmd, DMA_NONE, NULL, 0,
|
2013-10-04 21:42:24 +00:00
|
|
|
&sshdr, timeout, SD_MAX_RETRIES,
|
|
|
|
NULL, REQ_PM);
|
2005-08-28 16:33:52 +00:00
|
|
|
if (res == 0)
|
2005-04-16 22:20:36 +00:00
|
|
|
break;
|
|
|
|
}
|
|
|
|
|
2007-02-28 03:40:55 +00:00
|
|
|
if (res) {
|
2014-10-24 12:27:00 +00:00
|
|
|
sd_print_result(sdkp, "Synchronize Cache(10) failed", res);
|
2013-09-16 11:28:15 +00:00
|
|
|
|
2007-02-28 03:40:55 +00:00
|
|
|
if (driver_byte(res) & DRIVER_SENSE)
|
|
|
|
sd_print_sense_hdr(sdkp, &sshdr);
|
2013-09-16 11:28:15 +00:00
|
|
|
/* we need to evaluate the error return */
|
|
|
|
if (scsi_sense_valid(&sshdr) &&
|
2014-01-15 20:37:04 +00:00
|
|
|
(sshdr.asc == 0x3a || /* medium not present */
|
|
|
|
sshdr.asc == 0x20)) /* invalid command */
|
2013-09-16 11:28:15 +00:00
|
|
|
/* this is no error here */
|
|
|
|
return 0;
|
|
|
|
|
|
|
|
switch (host_byte(res)) {
|
|
|
|
/* ignore errors due to racing a disconnection */
|
|
|
|
case DID_BAD_TARGET:
|
|
|
|
case DID_NO_CONNECT:
|
|
|
|
return 0;
|
|
|
|
/* signal the upper layer it might try again */
|
|
|
|
case DID_BUS_BUSY:
|
|
|
|
case DID_IMM_RETRY:
|
|
|
|
case DID_REQUEUE:
|
|
|
|
case DID_SOFT_ERROR:
|
|
|
|
return -EBUSY;
|
|
|
|
default:
|
|
|
|
return -EIO;
|
|
|
|
}
|
2005-04-16 22:20:36 +00:00
|
|
|
}
|
2007-03-20 15:07:18 +00:00
|
|
|
return 0;
|
2005-04-16 22:20:36 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
static void sd_rescan(struct device *dev)
|
|
|
|
{
|
2015-02-02 13:01:25 +00:00
|
|
|
struct scsi_disk *sdkp = dev_get_drvdata(dev);
|
2005-11-04 19:44:41 +00:00
|
|
|
|
2015-02-02 13:01:25 +00:00
|
|
|
revalidate_disk(sdkp->disk);
|
2005-04-16 22:20:36 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
#ifdef CONFIG_COMPAT
|
|
|
|
/*
|
|
|
|
* This gets directly called from VFS. When the ioctl
|
|
|
|
* is not recognized we go back to the other translation paths.
|
|
|
|
*/
|
2008-03-02 15:41:04 +00:00
|
|
|
static int sd_compat_ioctl(struct block_device *bdev, fmode_t mode,
|
|
|
|
unsigned int cmd, unsigned long arg)
|
2005-04-16 22:20:36 +00:00
|
|
|
{
|
2008-03-02 15:41:04 +00:00
|
|
|
struct scsi_device *sdev = scsi_disk(bdev->bd_disk)->device;
|
2014-10-24 16:39:37 +00:00
|
|
|
int error;
|
2005-04-16 22:20:36 +00:00
|
|
|
|
2014-10-24 16:39:37 +00:00
|
|
|
error = scsi_ioctl_block_when_processing_errors(sdev, cmd,
|
|
|
|
(mode & FMODE_NDELAY) != 0);
|
|
|
|
if (error)
|
|
|
|
return error;
|
2005-04-16 22:20:36 +00:00
|
|
|
|
|
|
|
/*
|
|
|
|
* Let the static ioctl translation table take care of it.
|
|
|
|
*/
|
2014-10-24 16:39:37 +00:00
|
|
|
if (!sdev->host->hostt->compat_ioctl)
|
|
|
|
return -ENOIOCTLCMD;
|
|
|
|
return sdev->host->hostt->compat_ioctl(sdev, cmd, (void __user *)arg);
|
2005-04-16 22:20:36 +00:00
|
|
|
}
|
|
|
|
#endif
|
|
|
|
|
2015-10-15 12:10:49 +00:00
|
|
|
static char sd_pr_type(enum pr_type type)
|
|
|
|
{
|
|
|
|
switch (type) {
|
|
|
|
case PR_WRITE_EXCLUSIVE:
|
|
|
|
return 0x01;
|
|
|
|
case PR_EXCLUSIVE_ACCESS:
|
|
|
|
return 0x03;
|
|
|
|
case PR_WRITE_EXCLUSIVE_REG_ONLY:
|
|
|
|
return 0x05;
|
|
|
|
case PR_EXCLUSIVE_ACCESS_REG_ONLY:
|
|
|
|
return 0x06;
|
|
|
|
case PR_WRITE_EXCLUSIVE_ALL_REGS:
|
|
|
|
return 0x07;
|
|
|
|
case PR_EXCLUSIVE_ACCESS_ALL_REGS:
|
|
|
|
return 0x08;
|
|
|
|
default:
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
};
|
|
|
|
|
|
|
|
static int sd_pr_command(struct block_device *bdev, u8 sa,
|
|
|
|
u64 key, u64 sa_key, u8 type, u8 flags)
|
|
|
|
{
|
|
|
|
struct scsi_device *sdev = scsi_disk(bdev->bd_disk)->device;
|
|
|
|
struct scsi_sense_hdr sshdr;
|
|
|
|
int result;
|
|
|
|
u8 cmd[16] = { 0, };
|
|
|
|
u8 data[24] = { 0, };
|
|
|
|
|
|
|
|
cmd[0] = PERSISTENT_RESERVE_OUT;
|
|
|
|
cmd[1] = sa;
|
|
|
|
cmd[2] = type;
|
|
|
|
put_unaligned_be32(sizeof(data), &cmd[5]);
|
|
|
|
|
|
|
|
put_unaligned_be64(key, &data[0]);
|
|
|
|
put_unaligned_be64(sa_key, &data[8]);
|
|
|
|
data[20] = flags;
|
|
|
|
|
|
|
|
result = scsi_execute_req(sdev, cmd, DMA_TO_DEVICE, &data, sizeof(data),
|
|
|
|
&sshdr, SD_TIMEOUT, SD_MAX_RETRIES, NULL);
|
|
|
|
|
|
|
|
if ((driver_byte(result) & DRIVER_SENSE) &&
|
|
|
|
(scsi_sense_valid(&sshdr))) {
|
|
|
|
sdev_printk(KERN_INFO, sdev, "PR command failed: %d\n", result);
|
|
|
|
scsi_print_sense_hdr(sdev, NULL, &sshdr);
|
|
|
|
}
|
|
|
|
|
|
|
|
return result;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int sd_pr_register(struct block_device *bdev, u64 old_key, u64 new_key,
|
|
|
|
u32 flags)
|
|
|
|
{
|
|
|
|
if (flags & ~PR_FL_IGNORE_KEY)
|
|
|
|
return -EOPNOTSUPP;
|
|
|
|
return sd_pr_command(bdev, (flags & PR_FL_IGNORE_KEY) ? 0x06 : 0x00,
|
|
|
|
old_key, new_key, 0,
|
|
|
|
(1 << 0) /* APTPL */ |
|
|
|
|
(1 << 2) /* ALL_TG_PT */);
|
|
|
|
}
|
|
|
|
|
|
|
|
static int sd_pr_reserve(struct block_device *bdev, u64 key, enum pr_type type,
|
|
|
|
u32 flags)
|
|
|
|
{
|
|
|
|
if (flags)
|
|
|
|
return -EOPNOTSUPP;
|
|
|
|
return sd_pr_command(bdev, 0x01, key, 0, sd_pr_type(type), 0);
|
|
|
|
}
|
|
|
|
|
|
|
|
static int sd_pr_release(struct block_device *bdev, u64 key, enum pr_type type)
|
|
|
|
{
|
|
|
|
return sd_pr_command(bdev, 0x02, key, 0, sd_pr_type(type), 0);
|
|
|
|
}
|
|
|
|
|
|
|
|
static int sd_pr_preempt(struct block_device *bdev, u64 old_key, u64 new_key,
|
|
|
|
enum pr_type type, bool abort)
|
|
|
|
{
|
|
|
|
return sd_pr_command(bdev, abort ? 0x05 : 0x04, old_key, new_key,
|
|
|
|
sd_pr_type(type), 0);
|
|
|
|
}
|
|
|
|
|
|
|
|
static int sd_pr_clear(struct block_device *bdev, u64 key)
|
|
|
|
{
|
|
|
|
return sd_pr_command(bdev, 0x03, key, 0, 0, 0);
|
|
|
|
}
|
|
|
|
|
|
|
|
static const struct pr_ops sd_pr_ops = {
|
|
|
|
.pr_register = sd_pr_register,
|
|
|
|
.pr_reserve = sd_pr_reserve,
|
|
|
|
.pr_release = sd_pr_release,
|
|
|
|
.pr_preempt = sd_pr_preempt,
|
|
|
|
.pr_clear = sd_pr_clear,
|
|
|
|
};
|
|
|
|
|
2009-09-22 00:01:13 +00:00
|
|
|
static const struct block_device_operations sd_fops = {
|
2005-04-16 22:20:36 +00:00
|
|
|
.owner = THIS_MODULE,
|
2008-03-02 15:41:04 +00:00
|
|
|
.open = sd_open,
|
|
|
|
.release = sd_release,
|
2010-07-08 08:18:46 +00:00
|
|
|
.ioctl = sd_ioctl,
|
2006-01-08 09:02:50 +00:00
|
|
|
.getgeo = sd_getgeo,
|
2005-04-16 22:20:36 +00:00
|
|
|
#ifdef CONFIG_COMPAT
|
2008-03-02 15:41:04 +00:00
|
|
|
.compat_ioctl = sd_compat_ioctl,
|
2005-04-16 22:20:36 +00:00
|
|
|
#endif
|
2010-12-18 17:42:23 +00:00
|
|
|
.check_events = sd_check_events,
|
2005-04-16 22:20:36 +00:00
|
|
|
.revalidate_disk = sd_revalidate_disk,
|
2010-05-15 18:09:32 +00:00
|
|
|
.unlock_native_capacity = sd_unlock_native_capacity,
|
2015-10-15 12:10:49 +00:00
|
|
|
.pr_ops = &sd_pr_ops,
|
2005-04-16 22:20:36 +00:00
|
|
|
};
|
|
|
|
|
2012-02-09 18:48:53 +00:00
|
|
|
/**
|
|
|
|
* sd_eh_action - error handling callback
|
|
|
|
* @scmd: sd-issued command that has failed
|
|
|
|
* @eh_disp: The recovery disposition suggested by the midlayer
|
|
|
|
*
|
2013-11-11 12:44:53 +00:00
|
|
|
* This function is called by the SCSI midlayer upon completion of an
|
|
|
|
* error test command (currently TEST UNIT READY). The result of sending
|
|
|
|
* the eh command is passed in eh_disp. We're looking for devices that
|
|
|
|
* fail medium access commands but are OK with non access commands like
|
|
|
|
* test unit ready (so wrongly see the device as having a successful
|
|
|
|
* recovery)
|
2012-02-09 18:48:53 +00:00
|
|
|
**/
|
2013-11-11 12:44:53 +00:00
|
|
|
static int sd_eh_action(struct scsi_cmnd *scmd, int eh_disp)
|
2012-02-09 18:48:53 +00:00
|
|
|
{
|
|
|
|
struct scsi_disk *sdkp = scsi_disk(scmd->request->rq_disk);
|
|
|
|
|
|
|
|
if (!scsi_device_online(scmd->device) ||
|
2013-11-11 12:44:53 +00:00
|
|
|
!scsi_medium_access_command(scmd) ||
|
|
|
|
host_byte(scmd->result) != DID_TIME_OUT ||
|
|
|
|
eh_disp != SUCCESS)
|
2012-02-09 18:48:53 +00:00
|
|
|
return eh_disp;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* The device has timed out executing a medium access command.
|
|
|
|
* However, the TEST UNIT READY command sent during error
|
|
|
|
* handling completed successfully. Either the device is in the
|
|
|
|
* process of recovering or has it suffered an internal failure
|
|
|
|
* that prevents access to the storage medium.
|
|
|
|
*/
|
2013-11-11 12:44:53 +00:00
|
|
|
sdkp->medium_access_timed_out++;
|
2012-02-09 18:48:53 +00:00
|
|
|
|
|
|
|
/*
|
|
|
|
* If the device keeps failing read/write commands but TEST UNIT
|
|
|
|
* READY always completes successfully we assume that medium
|
|
|
|
* access is no longer possible and take the device offline.
|
|
|
|
*/
|
|
|
|
if (sdkp->medium_access_timed_out >= sdkp->max_medium_access_timeouts) {
|
|
|
|
scmd_printk(KERN_ERR, scmd,
|
|
|
|
"Medium access timeout failure. Offlining disk!\n");
|
|
|
|
scsi_device_set_state(scmd->device, SDEV_OFFLINE);
|
|
|
|
|
|
|
|
return FAILED;
|
|
|
|
}
|
|
|
|
|
|
|
|
return eh_disp;
|
|
|
|
}
|
|
|
|
|
2008-07-17 08:28:35 +00:00
|
|
|
static unsigned int sd_completed_bytes(struct scsi_cmnd *scmd)
|
|
|
|
{
|
2009-05-07 13:24:39 +00:00
|
|
|
u64 start_lba = blk_rq_pos(scmd->request);
|
|
|
|
u64 end_lba = blk_rq_pos(scmd->request) + (scsi_bufflen(scmd) / 512);
|
2015-05-13 08:49:09 +00:00
|
|
|
u64 factor = scmd->device->sector_size / 512;
|
2008-07-17 08:28:35 +00:00
|
|
|
u64 bad_lba;
|
|
|
|
int info_valid;
|
[SCSI] fix medium error problems with some arrays which can cause data corruption
Our current handling of medium error assumes that data is returned up
to the bad sector. This assumption holds good for all disk devices,
all DIF arrays and most ordinary arrays. However, an LSI array engine
was recently discovered which reports a medium error without returning
any data. This means that when we report good data up to the medium
error, we've reported junk originally in the buffer as good. Worse,
if the read consists of requested data plus a readahead, and the error
occurs in readahead, we'll just strip off the readahead and report
junk up to userspace as good data with no error.
The fix for this is to have the error position computation take into
account the amount of data returned by the driver using the scsi
residual data. Unfortunately, not every driver fills in this data,
but for those who don't, it's set to zero, which means we'll think a
full set of data was transferred and the behaviour will be identical
to the prior behaviour of the code (believe the buffer up to the error
sector). All modern drivers seem to set the residual, so that should
fix up the LSI failure/corruption case.
Reported-by: Douglas Gilbert <dgilbert@interlog.com>
Cc: Stable Tree <stable@kernel.org>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-12-17 20:36:34 +00:00
|
|
|
/*
|
|
|
|
* resid is optional but mostly filled in. When it's unused,
|
|
|
|
* its value is zero, so we assume the whole buffer transferred
|
|
|
|
*/
|
|
|
|
unsigned int transferred = scsi_bufflen(scmd) - scsi_get_resid(scmd);
|
|
|
|
unsigned int good_bytes;
|
2008-07-17 08:28:35 +00:00
|
|
|
|
2010-08-07 16:17:56 +00:00
|
|
|
if (scmd->request->cmd_type != REQ_TYPE_FS)
|
2008-07-17 08:28:35 +00:00
|
|
|
return 0;
|
|
|
|
|
|
|
|
info_valid = scsi_get_sense_info_fld(scmd->sense_buffer,
|
|
|
|
SCSI_SENSE_BUFFERSIZE,
|
|
|
|
&bad_lba);
|
|
|
|
if (!info_valid)
|
|
|
|
return 0;
|
|
|
|
|
|
|
|
if (scsi_bufflen(scmd) <= scmd->device->sector_size)
|
|
|
|
return 0;
|
|
|
|
|
2015-05-13 08:49:09 +00:00
|
|
|
/* be careful ... don't want any overflows */
|
|
|
|
do_div(start_lba, factor);
|
|
|
|
do_div(end_lba, factor);
|
2008-07-17 08:28:35 +00:00
|
|
|
|
|
|
|
/* The bad lba was reported incorrectly, we have no idea where
|
|
|
|
* the error is.
|
|
|
|
*/
|
|
|
|
if (bad_lba < start_lba || bad_lba >= end_lba)
|
|
|
|
return 0;
|
|
|
|
|
|
|
|
/* This computation should always be done in terms of
|
|
|
|
* the resolution of the device's medium.
|
|
|
|
*/
|
[SCSI] fix medium error problems with some arrays which can cause data corruption
Our current handling of medium error assumes that data is returned up
to the bad sector. This assumption holds good for all disk devices,
all DIF arrays and most ordinary arrays. However, an LSI array engine
was recently discovered which reports a medium error without returning
any data. This means that when we report good data up to the medium
error, we've reported junk originally in the buffer as good. Worse,
if the read consists of requested data plus a readahead, and the error
occurs in readahead, we'll just strip off the readahead and report
junk up to userspace as good data with no error.
The fix for this is to have the error position computation take into
account the amount of data returned by the driver using the scsi
residual data. Unfortunately, not every driver fills in this data,
but for those who don't, it's set to zero, which means we'll think a
full set of data was transferred and the behaviour will be identical
to the prior behaviour of the code (believe the buffer up to the error
sector). All modern drivers seem to set the residual, so that should
fix up the LSI failure/corruption case.
Reported-by: Douglas Gilbert <dgilbert@interlog.com>
Cc: Stable Tree <stable@kernel.org>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-12-17 20:36:34 +00:00
|
|
|
good_bytes = (bad_lba - start_lba) * scmd->device->sector_size;
|
|
|
|
return min(good_bytes, transferred);
|
2008-07-17 08:28:35 +00:00
|
|
|
}
|
|
|
|
|
2005-04-16 22:20:36 +00:00
|
|
|
/**
|
Revert "scsi: revert "[SCSI] Get rid of scsi_cmnd->done""
This reverts commit ac40532ef0b8649e6f7f83859ea0de1c4ed08a19, which gets
us back the original cleanup of 6f5391c283d7fdcf24bf40786ea79061919d1e1d.
It turns out that the bug that was triggered by that commit was
apparently not actually triggered by that commit at all, and just the
testing conditions had changed enough to make it appear to be due to it.
The real problem seems to have been found by Peter Osterlund:
"pktcdvd sets it [block device size] when opening the /dev/pktcdvd
device, but when the drive is later opened as /dev/scd0, there is
nothing that sets it back. (Btw, 40944 is possible if the disk is a
CDRW that was formatted with "cdrwtool -m 10236".)
The problem is that pktcdvd opens the cd device in non-blocking mode
when pktsetup is run, and doesn't close it again until pktsetup -d is
run. The effect is that if you meanwhile open the cd device,
blkdev.c:do_open() doesn't call bd_set_size() because
bdev->bd_openers is non-zero."
In particular, to repeat the bug (regardless of whether commit
6f5391c283d7fdcf24bf40786ea79061919d1e1d is applied or not):
" 1. Start with an empty drive.
2. pktsetup 0 /dev/scd0
3. Insert a CD containing an isofs filesystem.
4. mount /dev/pktcdvd/0 /mnt/tmp
5. umount /mnt/tmp
6. Press the eject button.
7. Insert a DVD containing a non-writable filesystem.
8. mount /dev/scd0 /mnt/tmp
9. find /mnt/tmp -type f -print0 | xargs -0 sha1sum >/dev/null
10. If the DVD contains data beyond the physical size of a CD, you
get I/O errors in the terminal, and dmesg reports lots of
"attempt to access beyond end of device" errors."
which in turn is because the nested open after the media change won't
cause the size to be set properly (because the original open still holds
the block device, and we only do the bd_set_size() when we don't have
other people holding the device open).
The proper fix for that is probably to just do something like
bdev->bd_inode->i_size = (loff_t)get_capacity(disk)<<9;
in fs/block_dev.c:do_open() even for the cases where we're not the
original opener (but *not* call bd_set_size(), since that will also
change the block size of the device).
Cc: Peter Osterlund <petero2@telia.com>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Matthew Wilcox <matthew@wil.cx>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-01-06 18:17:12 +00:00
|
|
|
* sd_done - bottom half handler: called when the lower level
|
2005-04-16 22:20:36 +00:00
|
|
|
* driver has completed (successfully or otherwise) a scsi command.
|
|
|
|
* @SCpnt: mid-level's per command structure.
|
|
|
|
*
|
|
|
|
* Note: potentially run from within an ISR. Must not block.
|
|
|
|
**/
|
Revert "scsi: revert "[SCSI] Get rid of scsi_cmnd->done""
This reverts commit ac40532ef0b8649e6f7f83859ea0de1c4ed08a19, which gets
us back the original cleanup of 6f5391c283d7fdcf24bf40786ea79061919d1e1d.
It turns out that the bug that was triggered by that commit was
apparently not actually triggered by that commit at all, and just the
testing conditions had changed enough to make it appear to be due to it.
The real problem seems to have been found by Peter Osterlund:
"pktcdvd sets it [block device size] when opening the /dev/pktcdvd
device, but when the drive is later opened as /dev/scd0, there is
nothing that sets it back. (Btw, 40944 is possible if the disk is a
CDRW that was formatted with "cdrwtool -m 10236".)
The problem is that pktcdvd opens the cd device in non-blocking mode
when pktsetup is run, and doesn't close it again until pktsetup -d is
run. The effect is that if you meanwhile open the cd device,
blkdev.c:do_open() doesn't call bd_set_size() because
bdev->bd_openers is non-zero."
In particular, to repeat the bug (regardless of whether commit
6f5391c283d7fdcf24bf40786ea79061919d1e1d is applied or not):
" 1. Start with an empty drive.
2. pktsetup 0 /dev/scd0
3. Insert a CD containing an isofs filesystem.
4. mount /dev/pktcdvd/0 /mnt/tmp
5. umount /mnt/tmp
6. Press the eject button.
7. Insert a DVD containing a non-writable filesystem.
8. mount /dev/scd0 /mnt/tmp
9. find /mnt/tmp -type f -print0 | xargs -0 sha1sum >/dev/null
10. If the DVD contains data beyond the physical size of a CD, you
get I/O errors in the terminal, and dmesg reports lots of
"attempt to access beyond end of device" errors."
which in turn is because the nested open after the media change won't
cause the size to be set properly (because the original open still holds
the block device, and we only do the bd_set_size() when we don't have
other people holding the device open).
The proper fix for that is probably to just do something like
bdev->bd_inode->i_size = (loff_t)get_capacity(disk)<<9;
in fs/block_dev.c:do_open() even for the cases where we're not the
original opener (but *not* call bd_set_size(), since that will also
change the block size of the device).
Cc: Peter Osterlund <petero2@telia.com>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Matthew Wilcox <matthew@wil.cx>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-01-06 18:17:12 +00:00
|
|
|
static int sd_done(struct scsi_cmnd *SCpnt)
|
2005-04-16 22:20:36 +00:00
|
|
|
{
|
|
|
|
int result = SCpnt->result;
|
2008-07-17 08:28:35 +00:00
|
|
|
unsigned int good_bytes = result ? 0 : scsi_bufflen(SCpnt);
|
2005-04-16 22:20:36 +00:00
|
|
|
struct scsi_sense_hdr sshdr;
|
2009-09-20 20:49:38 +00:00
|
|
|
struct scsi_disk *sdkp = scsi_disk(SCpnt->request->rq_disk);
|
2012-09-18 16:19:31 +00:00
|
|
|
struct request *req = SCpnt->request;
|
2005-04-16 22:20:36 +00:00
|
|
|
int sense_valid = 0;
|
|
|
|
int sense_deferred = 0;
|
2011-03-08 07:07:15 +00:00
|
|
|
unsigned char op = SCpnt->cmnd[0];
|
2012-09-18 16:19:32 +00:00
|
|
|
unsigned char unmap = SCpnt->cmnd[1] & 8;
|
2005-04-16 22:20:36 +00:00
|
|
|
|
2012-09-18 16:19:32 +00:00
|
|
|
if (req->cmd_flags & REQ_DISCARD || req->cmd_flags & REQ_WRITE_SAME) {
|
2012-09-18 16:19:31 +00:00
|
|
|
if (!result) {
|
|
|
|
good_bytes = blk_rq_bytes(req);
|
|
|
|
scsi_set_resid(SCpnt, 0);
|
|
|
|
} else {
|
|
|
|
good_bytes = 0;
|
|
|
|
scsi_set_resid(SCpnt, blk_rq_bytes(req));
|
|
|
|
}
|
|
|
|
}
|
2010-07-21 01:29:37 +00:00
|
|
|
|
2005-04-16 22:20:36 +00:00
|
|
|
if (result) {
|
|
|
|
sense_valid = scsi_command_normalize_sense(SCpnt, &sshdr);
|
|
|
|
if (sense_valid)
|
|
|
|
sense_deferred = scsi_sense_is_deferred(&sshdr);
|
|
|
|
}
|
2014-04-10 15:08:30 +00:00
|
|
|
sdkp->medium_access_timed_out = 0;
|
|
|
|
|
2006-06-23 16:39:09 +00:00
|
|
|
if (driver_byte(result) != DRIVER_SENSE &&
|
|
|
|
(!sense_valid || sense_deferred))
|
|
|
|
goto out;
|
|
|
|
|
|
|
|
switch (sshdr.sense_key) {
|
|
|
|
case HARDWARE_ERROR:
|
|
|
|
case MEDIUM_ERROR:
|
2008-07-17 08:28:35 +00:00
|
|
|
good_bytes = sd_completed_bytes(SCpnt);
|
2006-06-23 16:39:09 +00:00
|
|
|
break;
|
|
|
|
case RECOVERED_ERROR:
|
2008-07-17 08:28:35 +00:00
|
|
|
good_bytes = scsi_bufflen(SCpnt);
|
|
|
|
break;
|
2008-09-12 01:39:36 +00:00
|
|
|
case NO_SENSE:
|
|
|
|
/* This indicates a false check condition, so ignore it. An
|
|
|
|
* unknown amount of data was transferred so treat it as an
|
|
|
|
* error.
|
|
|
|
*/
|
|
|
|
SCpnt->result = 0;
|
|
|
|
memset(SCpnt->sense_buffer, 0, SCSI_SENSE_BUFFERSIZE);
|
|
|
|
break;
|
2011-03-08 07:07:15 +00:00
|
|
|
case ABORTED_COMMAND:
|
|
|
|
if (sshdr.asc == 0x10) /* DIF: Target detected corruption */
|
|
|
|
good_bytes = sd_completed_bytes(SCpnt);
|
|
|
|
break;
|
|
|
|
case ILLEGAL_REQUEST:
|
|
|
|
if (sshdr.asc == 0x10) /* DIX: Host detected corruption */
|
2008-07-17 08:28:35 +00:00
|
|
|
good_bytes = sd_completed_bytes(SCpnt);
|
2011-03-08 07:07:15 +00:00
|
|
|
/* INVALID COMMAND OPCODE or INVALID FIELD IN CDB */
|
2012-09-18 16:19:32 +00:00
|
|
|
if (sshdr.asc == 0x20 || sshdr.asc == 0x24) {
|
|
|
|
switch (op) {
|
|
|
|
case UNMAP:
|
|
|
|
sd_config_discard(sdkp, SD_LBP_DISABLE);
|
|
|
|
break;
|
|
|
|
case WRITE_SAME_16:
|
|
|
|
case WRITE_SAME:
|
|
|
|
if (unmap)
|
|
|
|
sd_config_discard(sdkp, SD_LBP_DISABLE);
|
|
|
|
else {
|
|
|
|
sdkp->device->no_write_same = 1;
|
|
|
|
sd_config_write_same(sdkp);
|
|
|
|
|
|
|
|
good_bytes = 0;
|
|
|
|
req->__data_len = blk_rq_bytes(req);
|
|
|
|
req->cmd_flags |= REQ_QUIET;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
}
|
2006-06-23 16:39:09 +00:00
|
|
|
break;
|
|
|
|
default:
|
|
|
|
break;
|
2005-04-16 22:20:36 +00:00
|
|
|
}
|
2006-06-23 16:39:09 +00:00
|
|
|
out:
|
2014-10-24 12:27:00 +00:00
|
|
|
SCSI_LOG_HLCOMPLETE(1, scmd_printk(KERN_INFO, SCpnt,
|
|
|
|
"sd_done: completed %d of %d bytes\n",
|
|
|
|
good_bytes, scsi_bufflen(SCpnt)));
|
|
|
|
|
2008-07-17 08:28:35 +00:00
|
|
|
if (rq_data_dir(SCpnt->request) == READ && scsi_prot_sg_count(SCpnt))
|
|
|
|
sd_dif_complete(SCpnt, good_bytes);
|
|
|
|
|
Revert "scsi: revert "[SCSI] Get rid of scsi_cmnd->done""
This reverts commit ac40532ef0b8649e6f7f83859ea0de1c4ed08a19, which gets
us back the original cleanup of 6f5391c283d7fdcf24bf40786ea79061919d1e1d.
It turns out that the bug that was triggered by that commit was
apparently not actually triggered by that commit at all, and just the
testing conditions had changed enough to make it appear to be due to it.
The real problem seems to have been found by Peter Osterlund:
"pktcdvd sets it [block device size] when opening the /dev/pktcdvd
device, but when the drive is later opened as /dev/scd0, there is
nothing that sets it back. (Btw, 40944 is possible if the disk is a
CDRW that was formatted with "cdrwtool -m 10236".)
The problem is that pktcdvd opens the cd device in non-blocking mode
when pktsetup is run, and doesn't close it again until pktsetup -d is
run. The effect is that if you meanwhile open the cd device,
blkdev.c:do_open() doesn't call bd_set_size() because
bdev->bd_openers is non-zero."
In particular, to repeat the bug (regardless of whether commit
6f5391c283d7fdcf24bf40786ea79061919d1e1d is applied or not):
" 1. Start with an empty drive.
2. pktsetup 0 /dev/scd0
3. Insert a CD containing an isofs filesystem.
4. mount /dev/pktcdvd/0 /mnt/tmp
5. umount /mnt/tmp
6. Press the eject button.
7. Insert a DVD containing a non-writable filesystem.
8. mount /dev/scd0 /mnt/tmp
9. find /mnt/tmp -type f -print0 | xargs -0 sha1sum >/dev/null
10. If the DVD contains data beyond the physical size of a CD, you
get I/O errors in the terminal, and dmesg reports lots of
"attempt to access beyond end of device" errors."
which in turn is because the nested open after the media change won't
cause the size to be set properly (because the original open still holds
the block device, and we only do the bd_set_size() when we don't have
other people holding the device open).
The proper fix for that is probably to just do something like
bdev->bd_inode->i_size = (loff_t)get_capacity(disk)<<9;
in fs/block_dev.c:do_open() even for the cases where we're not the
original opener (but *not* call bd_set_size(), since that will also
change the block size of the device).
Cc: Peter Osterlund <petero2@telia.com>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Matthew Wilcox <matthew@wil.cx>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-01-06 18:17:12 +00:00
|
|
|
return good_bytes;
|
2005-04-16 22:20:36 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* spinup disk - called only in sd_revalidate_disk()
|
|
|
|
*/
|
|
|
|
static void
|
2007-02-28 03:40:55 +00:00
|
|
|
sd_spinup_disk(struct scsi_disk *sdkp)
|
2005-08-28 16:33:52 +00:00
|
|
|
{
|
2005-04-16 22:20:36 +00:00
|
|
|
unsigned char cmd[10];
|
2005-07-12 14:45:17 +00:00
|
|
|
unsigned long spintime_expire = 0;
|
2005-04-16 22:20:36 +00:00
|
|
|
int retries, spintime;
|
|
|
|
unsigned int the_result;
|
|
|
|
struct scsi_sense_hdr sshdr;
|
|
|
|
int sense_valid = 0;
|
|
|
|
|
|
|
|
spintime = 0;
|
|
|
|
|
|
|
|
/* Spin up drives, as required. Only do this at boot time */
|
|
|
|
/* Spinup needs to be done for module loads too. */
|
|
|
|
do {
|
|
|
|
retries = 0;
|
|
|
|
|
|
|
|
do {
|
|
|
|
cmd[0] = TEST_UNIT_READY;
|
|
|
|
memset((void *) &cmd[1], 0, 9);
|
|
|
|
|
2005-08-28 16:33:52 +00:00
|
|
|
the_result = scsi_execute_req(sdkp->device, cmd,
|
|
|
|
DMA_NONE, NULL, 0,
|
|
|
|
&sshdr, SD_TIMEOUT,
|
2008-12-04 05:24:39 +00:00
|
|
|
SD_MAX_RETRIES, NULL);
|
2005-04-16 22:20:36 +00:00
|
|
|
|
2006-10-11 20:48:28 +00:00
|
|
|
/*
|
|
|
|
* If the drive has indicated to us that it
|
|
|
|
* doesn't have any media in it, don't bother
|
|
|
|
* with any more polling.
|
|
|
|
*/
|
|
|
|
if (media_not_present(sdkp, &sshdr))
|
|
|
|
return;
|
|
|
|
|
2005-04-16 22:20:36 +00:00
|
|
|
if (the_result)
|
2005-08-28 16:33:52 +00:00
|
|
|
sense_valid = scsi_sense_valid(&sshdr);
|
2005-04-16 22:20:36 +00:00
|
|
|
retries++;
|
|
|
|
} while (retries < 3 &&
|
|
|
|
(!scsi_status_is_good(the_result) ||
|
|
|
|
((driver_byte(the_result) & DRIVER_SENSE) &&
|
|
|
|
sense_valid && sshdr.sense_key == UNIT_ATTENTION)));
|
|
|
|
|
|
|
|
if ((driver_byte(the_result) & DRIVER_SENSE) == 0) {
|
|
|
|
/* no sense, TUR either succeeded or failed
|
|
|
|
* with a status error */
|
2007-02-28 03:40:55 +00:00
|
|
|
if(!spintime && !scsi_status_is_good(the_result)) {
|
2014-10-24 12:27:00 +00:00
|
|
|
sd_print_result(sdkp, "Test Unit Ready failed",
|
|
|
|
the_result);
|
2007-02-28 03:40:55 +00:00
|
|
|
}
|
2005-04-16 22:20:36 +00:00
|
|
|
break;
|
|
|
|
}
|
2014-10-24 12:27:00 +00:00
|
|
|
|
2005-04-16 22:20:36 +00:00
|
|
|
/*
|
|
|
|
* The device does not want the automatic start to be issued.
|
|
|
|
*/
|
2009-02-20 13:53:48 +00:00
|
|
|
if (sdkp->device->no_start_on_add)
|
2005-04-16 22:20:36 +00:00
|
|
|
break;
|
|
|
|
|
2009-02-20 13:53:48 +00:00
|
|
|
if (sense_valid && sshdr.sense_key == NOT_READY) {
|
|
|
|
if (sshdr.asc == 4 && sshdr.ascq == 3)
|
|
|
|
break; /* manual intervention required */
|
|
|
|
if (sshdr.asc == 4 && sshdr.ascq == 0xb)
|
|
|
|
break; /* standby */
|
|
|
|
if (sshdr.asc == 4 && sshdr.ascq == 0xc)
|
|
|
|
break; /* unavailable */
|
|
|
|
/*
|
|
|
|
* Issue command to spin up drive when not ready
|
|
|
|
*/
|
2005-04-16 22:20:36 +00:00
|
|
|
if (!spintime) {
|
2007-02-28 03:40:55 +00:00
|
|
|
sd_printk(KERN_NOTICE, sdkp, "Spinning up disk...");
|
2005-04-16 22:20:36 +00:00
|
|
|
cmd[0] = START_STOP;
|
|
|
|
cmd[1] = 1; /* Return immediately */
|
|
|
|
memset((void *) &cmd[2], 0, 8);
|
|
|
|
cmd[4] = 1; /* Start spin cycle */
|
2008-05-10 22:34:07 +00:00
|
|
|
if (sdkp->device->start_stop_pwr_cond)
|
|
|
|
cmd[4] |= 1 << 4;
|
2005-08-28 16:33:52 +00:00
|
|
|
scsi_execute_req(sdkp->device, cmd, DMA_NONE,
|
|
|
|
NULL, 0, &sshdr,
|
2008-12-04 05:24:39 +00:00
|
|
|
SD_TIMEOUT, SD_MAX_RETRIES,
|
|
|
|
NULL);
|
2005-07-12 14:45:17 +00:00
|
|
|
spintime_expire = jiffies + 100 * HZ;
|
|
|
|
spintime = 1;
|
2005-04-16 22:20:36 +00:00
|
|
|
}
|
|
|
|
/* Wait 1 second for next try */
|
|
|
|
msleep(1000);
|
|
|
|
printk(".");
|
2005-07-12 14:45:17 +00:00
|
|
|
|
|
|
|
/*
|
|
|
|
* Wait for USB flash devices with slow firmware.
|
|
|
|
* Yes, this sense key/ASC combination shouldn't
|
|
|
|
* occur here. It's characteristic of these devices.
|
|
|
|
*/
|
|
|
|
} else if (sense_valid &&
|
|
|
|
sshdr.sense_key == UNIT_ATTENTION &&
|
|
|
|
sshdr.asc == 0x28) {
|
|
|
|
if (!spintime) {
|
|
|
|
spintime_expire = jiffies + 5 * HZ;
|
|
|
|
spintime = 1;
|
|
|
|
}
|
|
|
|
/* Wait 1 second for next try */
|
|
|
|
msleep(1000);
|
2005-04-16 22:20:36 +00:00
|
|
|
} else {
|
|
|
|
/* we don't understand the sense code, so it's
|
|
|
|
* probably pointless to loop */
|
|
|
|
if(!spintime) {
|
2007-02-28 03:40:55 +00:00
|
|
|
sd_printk(KERN_NOTICE, sdkp, "Unit Not Ready\n");
|
|
|
|
sd_print_sense_hdr(sdkp, &sshdr);
|
2005-04-16 22:20:36 +00:00
|
|
|
}
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
|
2005-07-12 14:45:17 +00:00
|
|
|
} while (spintime && time_before_eq(jiffies, spintime_expire));
|
2005-04-16 22:20:36 +00:00
|
|
|
|
|
|
|
if (spintime) {
|
|
|
|
if (scsi_status_is_good(the_result))
|
|
|
|
printk("ready\n");
|
|
|
|
else
|
|
|
|
printk("not responding...\n");
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2008-07-17 08:28:34 +00:00
|
|
|
|
|
|
|
/*
|
|
|
|
* Determine whether disk supports Data Integrity Field.
|
|
|
|
*/
|
2012-09-21 16:44:12 +00:00
|
|
|
static int sd_read_protection_type(struct scsi_disk *sdkp, unsigned char *buffer)
|
2008-07-17 08:28:34 +00:00
|
|
|
{
|
|
|
|
struct scsi_device *sdp = sdkp->device;
|
|
|
|
u8 type;
|
2012-09-21 16:44:12 +00:00
|
|
|
int ret = 0;
|
2008-07-17 08:28:34 +00:00
|
|
|
|
|
|
|
if (scsi_device_protection(sdp) == 0 || (buffer[12] & 1) == 0)
|
2012-09-21 16:44:12 +00:00
|
|
|
return ret;
|
2009-09-18 21:33:00 +00:00
|
|
|
|
|
|
|
type = ((buffer[12] >> 1) & 7) + 1; /* P_TYPE 0 = Type 1 */
|
|
|
|
|
2012-09-21 16:44:12 +00:00
|
|
|
if (type > SD_DIF_TYPE3_PROTECTION)
|
|
|
|
ret = -ENODEV;
|
|
|
|
else if (scsi_host_dif_capable(sdp->host, type))
|
|
|
|
ret = 1;
|
|
|
|
|
|
|
|
if (sdkp->first_scan || type != sdkp->protection_type)
|
|
|
|
switch (ret) {
|
|
|
|
case -ENODEV:
|
|
|
|
sd_printk(KERN_ERR, sdkp, "formatted with unsupported" \
|
|
|
|
" protection type %u. Disabling disk!\n",
|
|
|
|
type);
|
|
|
|
break;
|
|
|
|
case 1:
|
|
|
|
sd_printk(KERN_NOTICE, sdkp,
|
|
|
|
"Enabling DIF Type %u protection\n", type);
|
|
|
|
break;
|
|
|
|
case 0:
|
|
|
|
sd_printk(KERN_NOTICE, sdkp,
|
|
|
|
"Disabling DIF Type %u protection\n", type);
|
|
|
|
break;
|
|
|
|
}
|
2008-07-17 08:28:34 +00:00
|
|
|
|
2008-09-19 22:47:20 +00:00
|
|
|
sdkp->protection_type = type;
|
|
|
|
|
2012-09-21 16:44:12 +00:00
|
|
|
return ret;
|
2008-07-17 08:28:34 +00:00
|
|
|
}
|
|
|
|
|
2009-03-12 18:20:29 +00:00
|
|
|
static void read_capacity_error(struct scsi_disk *sdkp, struct scsi_device *sdp,
|
|
|
|
struct scsi_sense_hdr *sshdr, int sense_valid,
|
|
|
|
int the_result)
|
|
|
|
{
|
|
|
|
if (driver_byte(the_result) & DRIVER_SENSE)
|
|
|
|
sd_print_sense_hdr(sdkp, sshdr);
|
|
|
|
else
|
|
|
|
sd_printk(KERN_NOTICE, sdkp, "Sense not available.\n");
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Set dirty bit for removable devices if not ready -
|
|
|
|
* sometimes drives will not report this properly.
|
|
|
|
*/
|
|
|
|
if (sdp->removable &&
|
|
|
|
sense_valid && sshdr->sense_key == NOT_READY)
|
2010-12-18 17:42:23 +00:00
|
|
|
set_media_not_present(sdkp);
|
2009-03-12 18:20:29 +00:00
|
|
|
|
|
|
|
/*
|
|
|
|
* We used to set media_present to 0 here to indicate no media
|
|
|
|
* in the drive, but some drives fail read capacity even with
|
|
|
|
* media present, so we can't do that.
|
|
|
|
*/
|
|
|
|
sdkp->capacity = 0; /* unknown mapped to zero - as usual */
|
|
|
|
}
|
|
|
|
|
|
|
|
#define RC16_LEN 32
|
|
|
|
#if RC16_LEN > SD_BUF_SIZE
|
|
|
|
#error RC16_LEN must not be more than SD_BUF_SIZE
|
|
|
|
#endif
|
|
|
|
|
2010-04-01 14:30:01 +00:00
|
|
|
#define READ_CAPACITY_RETRIES_ON_RESET 10
|
|
|
|
|
2009-03-12 18:20:29 +00:00
|
|
|
static int read_capacity_16(struct scsi_disk *sdkp, struct scsi_device *sdp,
|
|
|
|
unsigned char *buffer)
|
2005-08-28 16:33:52 +00:00
|
|
|
{
|
2005-04-16 22:20:36 +00:00
|
|
|
unsigned char cmd[16];
|
|
|
|
struct scsi_sense_hdr sshdr;
|
|
|
|
int sense_valid = 0;
|
2009-03-12 18:20:29 +00:00
|
|
|
int the_result;
|
2010-04-01 14:30:01 +00:00
|
|
|
int retries = 3, reset_retries = READ_CAPACITY_RETRIES_ON_RESET;
|
2009-05-23 15:43:37 +00:00
|
|
|
unsigned int alignment;
|
2009-03-12 18:20:29 +00:00
|
|
|
unsigned long long lba;
|
|
|
|
unsigned sector_size;
|
2005-04-16 22:20:36 +00:00
|
|
|
|
2010-10-01 21:20:10 +00:00
|
|
|
if (sdp->no_read_capacity_16)
|
|
|
|
return -EINVAL;
|
|
|
|
|
2005-04-16 22:20:36 +00:00
|
|
|
do {
|
2009-03-12 18:20:29 +00:00
|
|
|
memset(cmd, 0, 16);
|
2014-11-17 13:25:19 +00:00
|
|
|
cmd[0] = SERVICE_ACTION_IN_16;
|
2009-03-12 18:20:29 +00:00
|
|
|
cmd[1] = SAI_READ_CAPACITY_16;
|
|
|
|
cmd[13] = RC16_LEN;
|
|
|
|
memset(buffer, 0, RC16_LEN);
|
|
|
|
|
2005-08-28 16:33:52 +00:00
|
|
|
the_result = scsi_execute_req(sdp, cmd, DMA_FROM_DEVICE,
|
2009-03-12 18:20:29 +00:00
|
|
|
buffer, RC16_LEN, &sshdr,
|
|
|
|
SD_TIMEOUT, SD_MAX_RETRIES, NULL);
|
2005-04-16 22:20:36 +00:00
|
|
|
|
2005-08-28 16:33:52 +00:00
|
|
|
if (media_not_present(sdkp, &sshdr))
|
2009-03-12 18:20:29 +00:00
|
|
|
return -ENODEV;
|
2005-04-16 22:20:36 +00:00
|
|
|
|
2009-03-12 18:20:30 +00:00
|
|
|
if (the_result) {
|
2005-08-28 16:33:52 +00:00
|
|
|
sense_valid = scsi_sense_valid(&sshdr);
|
2009-03-12 18:20:30 +00:00
|
|
|
if (sense_valid &&
|
|
|
|
sshdr.sense_key == ILLEGAL_REQUEST &&
|
|
|
|
(sshdr.asc == 0x20 || sshdr.asc == 0x24) &&
|
|
|
|
sshdr.ascq == 0x00)
|
|
|
|
/* Invalid Command Operation Code or
|
|
|
|
* Invalid Field in CDB, just retry
|
|
|
|
* silently with RC10 */
|
|
|
|
return -EINVAL;
|
2010-04-01 14:30:01 +00:00
|
|
|
if (sense_valid &&
|
|
|
|
sshdr.sense_key == UNIT_ATTENTION &&
|
|
|
|
sshdr.asc == 0x29 && sshdr.ascq == 0x00)
|
|
|
|
/* Device reset might occur several times,
|
|
|
|
* give it one more chance */
|
|
|
|
if (--reset_retries > 0)
|
|
|
|
continue;
|
2009-03-12 18:20:30 +00:00
|
|
|
}
|
2005-04-16 22:20:36 +00:00
|
|
|
retries--;
|
|
|
|
|
|
|
|
} while (the_result && retries);
|
|
|
|
|
2009-03-12 18:20:29 +00:00
|
|
|
if (the_result) {
|
2014-10-24 12:27:00 +00:00
|
|
|
sd_print_result(sdkp, "Read Capacity(16) failed", the_result);
|
2009-03-12 18:20:29 +00:00
|
|
|
read_capacity_error(sdkp, sdp, &sshdr, sense_valid, the_result);
|
|
|
|
return -EINVAL;
|
|
|
|
}
|
2007-02-28 03:40:55 +00:00
|
|
|
|
2009-04-21 23:43:27 +00:00
|
|
|
sector_size = get_unaligned_be32(&buffer[8]);
|
|
|
|
lba = get_unaligned_be64(&buffer[0]);
|
2009-03-12 18:20:29 +00:00
|
|
|
|
2012-09-21 16:44:12 +00:00
|
|
|
if (sd_read_protection_type(sdkp, buffer) < 0) {
|
|
|
|
sdkp->capacity = 0;
|
|
|
|
return -ENODEV;
|
|
|
|
}
|
2009-03-12 18:20:29 +00:00
|
|
|
|
|
|
|
if ((sizeof(sdkp->capacity) == 4) && (lba >= 0xffffffffULL)) {
|
|
|
|
sd_printk(KERN_ERR, sdkp, "Too big for this kernel. Use a "
|
|
|
|
"kernel compiled with support for large block "
|
|
|
|
"devices.\n");
|
|
|
|
sdkp->capacity = 0;
|
|
|
|
return -EOVERFLOW;
|
|
|
|
}
|
|
|
|
|
2009-05-23 15:43:37 +00:00
|
|
|
/* Logical blocks per physical block exponent */
|
2010-09-28 18:48:47 +00:00
|
|
|
sdkp->physical_block_size = (1 << (buffer[13] & 0xf)) * sector_size;
|
2009-05-23 15:43:37 +00:00
|
|
|
|
|
|
|
/* Lowest aligned logical block */
|
|
|
|
alignment = ((buffer[14] & 0x3f) << 8 | buffer[15]) * sector_size;
|
|
|
|
blk_queue_alignment_offset(sdp->request_queue, alignment);
|
|
|
|
if (alignment && sdkp->first_scan)
|
|
|
|
sd_printk(KERN_NOTICE, sdkp,
|
|
|
|
"physical block alignment offset: %u\n", alignment);
|
|
|
|
|
2011-03-08 07:07:15 +00:00
|
|
|
if (buffer[14] & 0x80) { /* LBPME */
|
|
|
|
sdkp->lbpme = 1;
|
2009-11-26 17:00:40 +00:00
|
|
|
|
2011-03-08 07:07:15 +00:00
|
|
|
if (buffer[14] & 0x40) /* LBPRZ */
|
|
|
|
sdkp->lbprz = 1;
|
2009-11-26 17:00:40 +00:00
|
|
|
|
2011-03-08 07:07:15 +00:00
|
|
|
sd_config_discard(sdkp, SD_LBP_WS16);
|
2009-11-26 17:00:40 +00:00
|
|
|
}
|
|
|
|
|
2009-03-12 18:20:29 +00:00
|
|
|
sdkp->capacity = lba + 1;
|
|
|
|
return sector_size;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int read_capacity_10(struct scsi_disk *sdkp, struct scsi_device *sdp,
|
|
|
|
unsigned char *buffer)
|
|
|
|
{
|
|
|
|
unsigned char cmd[16];
|
|
|
|
struct scsi_sense_hdr sshdr;
|
|
|
|
int sense_valid = 0;
|
|
|
|
int the_result;
|
2010-04-01 14:30:01 +00:00
|
|
|
int retries = 3, reset_retries = READ_CAPACITY_RETRIES_ON_RESET;
|
2009-03-12 18:20:29 +00:00
|
|
|
sector_t lba;
|
|
|
|
unsigned sector_size;
|
|
|
|
|
|
|
|
do {
|
|
|
|
cmd[0] = READ_CAPACITY;
|
|
|
|
memset(&cmd[1], 0, 9);
|
|
|
|
memset(buffer, 0, 8);
|
|
|
|
|
|
|
|
the_result = scsi_execute_req(sdp, cmd, DMA_FROM_DEVICE,
|
|
|
|
buffer, 8, &sshdr,
|
|
|
|
SD_TIMEOUT, SD_MAX_RETRIES, NULL);
|
|
|
|
|
|
|
|
if (media_not_present(sdkp, &sshdr))
|
|
|
|
return -ENODEV;
|
|
|
|
|
2010-04-01 14:30:01 +00:00
|
|
|
if (the_result) {
|
2009-03-12 18:20:29 +00:00
|
|
|
sense_valid = scsi_sense_valid(&sshdr);
|
2010-04-01 14:30:01 +00:00
|
|
|
if (sense_valid &&
|
|
|
|
sshdr.sense_key == UNIT_ATTENTION &&
|
|
|
|
sshdr.asc == 0x29 && sshdr.ascq == 0x00)
|
|
|
|
/* Device reset might occur several times,
|
|
|
|
* give it one more chance */
|
|
|
|
if (--reset_retries > 0)
|
|
|
|
continue;
|
|
|
|
}
|
2009-03-12 18:20:29 +00:00
|
|
|
retries--;
|
|
|
|
|
|
|
|
} while (the_result && retries);
|
|
|
|
|
|
|
|
if (the_result) {
|
2014-10-24 12:27:00 +00:00
|
|
|
sd_print_result(sdkp, "Read Capacity(10) failed", the_result);
|
2009-03-12 18:20:29 +00:00
|
|
|
read_capacity_error(sdkp, sdp, &sshdr, sense_valid, the_result);
|
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
|
2009-04-21 23:43:27 +00:00
|
|
|
sector_size = get_unaligned_be32(&buffer[4]);
|
|
|
|
lba = get_unaligned_be32(&buffer[0]);
|
2009-03-12 18:20:29 +00:00
|
|
|
|
2010-10-01 21:20:10 +00:00
|
|
|
if (sdp->no_read_capacity_16 && (lba == 0xffffffff)) {
|
|
|
|
/* Some buggy (usb cardreader) devices return an lba of
|
|
|
|
0xffffffff when the want to report a size of 0 (with
|
|
|
|
which they really mean no media is present) */
|
|
|
|
sdkp->capacity = 0;
|
2010-10-23 03:30:48 +00:00
|
|
|
sdkp->physical_block_size = sector_size;
|
2010-10-01 21:20:10 +00:00
|
|
|
return sector_size;
|
|
|
|
}
|
|
|
|
|
2009-03-12 18:20:29 +00:00
|
|
|
if ((sizeof(sdkp->capacity) == 4) && (lba == 0xffffffff)) {
|
|
|
|
sd_printk(KERN_ERR, sdkp, "Too big for this kernel. Use a "
|
|
|
|
"kernel compiled with support for large block "
|
|
|
|
"devices.\n");
|
|
|
|
sdkp->capacity = 0;
|
|
|
|
return -EOVERFLOW;
|
|
|
|
}
|
|
|
|
|
|
|
|
sdkp->capacity = lba + 1;
|
2010-09-28 18:48:47 +00:00
|
|
|
sdkp->physical_block_size = sector_size;
|
2009-03-12 18:20:29 +00:00
|
|
|
return sector_size;
|
|
|
|
}
|
|
|
|
|
2009-03-12 18:20:30 +00:00
|
|
|
static int sd_try_rc16_first(struct scsi_device *sdp)
|
|
|
|
{
|
2010-03-29 07:29:24 +00:00
|
|
|
if (sdp->host->max_cmd_len < 16)
|
|
|
|
return 0;
|
2012-06-20 20:04:19 +00:00
|
|
|
if (sdp->try_rc_10_first)
|
|
|
|
return 0;
|
2009-03-12 18:20:30 +00:00
|
|
|
if (sdp->scsi_level > SCSI_SPC_2)
|
|
|
|
return 1;
|
|
|
|
if (scsi_device_protection(sdp))
|
|
|
|
return 1;
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2009-03-12 18:20:29 +00:00
|
|
|
/*
|
|
|
|
* read disk capacity
|
|
|
|
*/
|
|
|
|
static void
|
|
|
|
sd_read_capacity(struct scsi_disk *sdkp, unsigned char *buffer)
|
|
|
|
{
|
|
|
|
int sector_size;
|
|
|
|
struct scsi_device *sdp = sdkp->device;
|
2009-03-09 15:33:31 +00:00
|
|
|
sector_t old_capacity = sdkp->capacity;
|
2009-03-12 18:20:29 +00:00
|
|
|
|
2009-03-12 18:20:30 +00:00
|
|
|
if (sd_try_rc16_first(sdp)) {
|
2009-03-12 18:20:29 +00:00
|
|
|
sector_size = read_capacity_16(sdkp, sdp, buffer);
|
|
|
|
if (sector_size == -EOVERFLOW)
|
2005-04-16 22:20:36 +00:00
|
|
|
goto got_data;
|
2009-03-12 18:20:30 +00:00
|
|
|
if (sector_size == -ENODEV)
|
|
|
|
return;
|
|
|
|
if (sector_size < 0)
|
|
|
|
sector_size = read_capacity_10(sdkp, sdp, buffer);
|
2009-03-12 18:20:29 +00:00
|
|
|
if (sector_size < 0)
|
|
|
|
return;
|
2005-04-16 22:20:36 +00:00
|
|
|
} else {
|
2009-03-12 18:20:29 +00:00
|
|
|
sector_size = read_capacity_10(sdkp, sdp, buffer);
|
|
|
|
if (sector_size == -EOVERFLOW)
|
|
|
|
goto got_data;
|
|
|
|
if (sector_size < 0)
|
|
|
|
return;
|
|
|
|
if ((sizeof(sdkp->capacity) > 4) &&
|
|
|
|
(sdkp->capacity > 0xffffffffULL)) {
|
|
|
|
int old_sector_size = sector_size;
|
|
|
|
sd_printk(KERN_NOTICE, sdkp, "Very big device. "
|
|
|
|
"Trying to use READ CAPACITY(16).\n");
|
|
|
|
sector_size = read_capacity_16(sdkp, sdp, buffer);
|
|
|
|
if (sector_size < 0) {
|
|
|
|
sd_printk(KERN_NOTICE, sdkp,
|
|
|
|
"Using 0xffffffff as device size\n");
|
|
|
|
sdkp->capacity = 1 + (sector_t) 0xffffffff;
|
|
|
|
sector_size = old_sector_size;
|
|
|
|
goto got_data;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
}
|
2005-04-16 22:20:36 +00:00
|
|
|
|
2009-02-18 15:54:44 +00:00
|
|
|
/* Some devices are known to return the total number of blocks,
|
|
|
|
* not the highest block number. Some devices have versions
|
|
|
|
* which do this and others which do not. Some devices we might
|
|
|
|
* suspect of doing this but we don't know for certain.
|
|
|
|
*
|
|
|
|
* If we know the reported capacity is wrong, decrement it. If
|
|
|
|
* we can only guess, then assume the number of blocks is even
|
|
|
|
* (usually true but not always) and err on the side of lowering
|
|
|
|
* the capacity.
|
|
|
|
*/
|
|
|
|
if (sdp->fix_capacity ||
|
|
|
|
(sdp->guess_capacity && (sdkp->capacity & 0x01))) {
|
|
|
|
sd_printk(KERN_INFO, sdkp, "Adjusting the sector count "
|
|
|
|
"from its reported value: %llu\n",
|
|
|
|
(unsigned long long) sdkp->capacity);
|
2005-04-16 22:20:36 +00:00
|
|
|
--sdkp->capacity;
|
2007-02-08 08:04:48 +00:00
|
|
|
}
|
|
|
|
|
2005-04-16 22:20:36 +00:00
|
|
|
got_data:
|
|
|
|
if (sector_size == 0) {
|
|
|
|
sector_size = 512;
|
2007-02-28 03:40:55 +00:00
|
|
|
sd_printk(KERN_NOTICE, sdkp, "Sector size 0 reported, "
|
|
|
|
"assuming 512.\n");
|
2005-04-16 22:20:36 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
if (sector_size != 512 &&
|
|
|
|
sector_size != 1024 &&
|
|
|
|
sector_size != 2048 &&
|
2015-05-13 08:49:09 +00:00
|
|
|
sector_size != 4096) {
|
2007-02-28 03:40:55 +00:00
|
|
|
sd_printk(KERN_NOTICE, sdkp, "Unsupported sector size %d.\n",
|
|
|
|
sector_size);
|
2005-04-16 22:20:36 +00:00
|
|
|
/*
|
|
|
|
* The user might want to re-format the drive with
|
|
|
|
* a supported sectorsize. Once this happens, it
|
|
|
|
* would be relatively trivial to set the thing up.
|
|
|
|
* For this reason, we leave the thing in the table.
|
|
|
|
*/
|
|
|
|
sdkp->capacity = 0;
|
|
|
|
/*
|
|
|
|
* set a bogus sector size so the normal read/write
|
|
|
|
* logic in the block layer will eventually refuse any
|
|
|
|
* request on this device without tripping over power
|
|
|
|
* of two sector size assumptions
|
|
|
|
*/
|
|
|
|
sector_size = 512;
|
|
|
|
}
|
2009-05-22 21:17:49 +00:00
|
|
|
blk_queue_logical_block_size(sdp->request_queue, sector_size);
|
2008-08-31 15:41:52 +00:00
|
|
|
|
2005-04-16 22:20:36 +00:00
|
|
|
{
|
2008-08-31 15:41:52 +00:00
|
|
|
char cap_str_2[10], cap_str_10[10];
|
2005-04-16 22:20:36 +00:00
|
|
|
|
sd, mmc, virtio_blk, string_helpers: fix block size units
The current string_get_size() overflows when the device size goes over
2^64 bytes because the string helper routine computes the suffix from
the size in bytes. However, the entirety of Linux thinks in terms of
blocks, not bytes, so this will artificially induce an overflow on very
large devices. Fix this by making the function string_get_size() take
blocks and the block size instead of bytes. This should allow us to
keep working until the current SCSI standard overflows.
Also fix virtio_blk and mmc (both of which were also artificially
multiplying by the block size to pass a byte side to string_get_size()).
The mathematics of this is pretty simple: we're taking a product of
size in blocks (S) and block size (B) and trying to re-express this in
exponential form: S*B = R*N^E (where N, the exponent is either 1000 or
1024) and R < N. Mathematically, S = RS*N^ES and B=RB*N^EB, so if RS*RB
< N it's easy to see that S*B = RS*RB*N^(ES+EB). However, if RS*BS > N,
we can see that this can be re-expressed as RS*BS = R*N (where R =
RS*BS/N < N) so the whole exponent becomes R*N^(ES+EB+1)
[jejb: fix incorrect 32 bit do_div spotted by kbuild test robot <fengguang.wu@intel.com>]
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-03-06 02:47:01 +00:00
|
|
|
string_get_size(sdkp->capacity, sector_size,
|
|
|
|
STRING_UNITS_2, cap_str_2, sizeof(cap_str_2));
|
|
|
|
string_get_size(sdkp->capacity, sector_size,
|
|
|
|
STRING_UNITS_10, cap_str_10,
|
2008-08-31 15:41:52 +00:00
|
|
|
sizeof(cap_str_10));
|
2005-04-16 22:20:36 +00:00
|
|
|
|
2009-05-23 15:43:37 +00:00
|
|
|
if (sdkp->first_scan || old_capacity != sdkp->capacity) {
|
2009-03-09 15:33:31 +00:00
|
|
|
sd_printk(KERN_NOTICE, sdkp,
|
2009-05-23 15:43:37 +00:00
|
|
|
"%llu %d-byte logical blocks: (%s/%s)\n",
|
2009-03-09 15:33:31 +00:00
|
|
|
(unsigned long long)sdkp->capacity,
|
|
|
|
sector_size, cap_str_10, cap_str_2);
|
2009-05-23 15:43:37 +00:00
|
|
|
|
2010-09-28 18:48:47 +00:00
|
|
|
if (sdkp->physical_block_size != sector_size)
|
2009-05-23 15:43:37 +00:00
|
|
|
sd_printk(KERN_NOTICE, sdkp,
|
|
|
|
"%u-byte physical blocks\n",
|
2010-09-28 18:48:47 +00:00
|
|
|
sdkp->physical_block_size);
|
2009-05-23 15:43:37 +00:00
|
|
|
}
|
2005-04-16 22:20:36 +00:00
|
|
|
}
|
|
|
|
|
2014-06-03 22:45:51 +00:00
|
|
|
if (sdkp->capacity > 0xffffffff) {
|
|
|
|
sdp->use_16_for_rw = 1;
|
|
|
|
sdkp->max_xfer_blocks = SD_MAX_XFER_BLOCKS;
|
|
|
|
} else
|
|
|
|
sdkp->max_xfer_blocks = SD_DEF_XFER_BLOCKS;
|
2012-11-14 22:03:22 +00:00
|
|
|
|
2005-04-16 22:20:36 +00:00
|
|
|
/* Rescale capacity to 512-byte units */
|
|
|
|
if (sector_size == 4096)
|
|
|
|
sdkp->capacity <<= 3;
|
|
|
|
else if (sector_size == 2048)
|
|
|
|
sdkp->capacity <<= 2;
|
|
|
|
else if (sector_size == 1024)
|
|
|
|
sdkp->capacity <<= 1;
|
|
|
|
|
2010-09-28 18:48:47 +00:00
|
|
|
blk_queue_physical_block_size(sdp->request_queue,
|
|
|
|
sdkp->physical_block_size);
|
2005-04-16 22:20:36 +00:00
|
|
|
sdkp->device->sector_size = sector_size;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* called with buffer of length 512 */
|
|
|
|
static inline int
|
2005-08-28 16:33:52 +00:00
|
|
|
sd_do_mode_sense(struct scsi_device *sdp, int dbd, int modepage,
|
|
|
|
unsigned char *buffer, int len, struct scsi_mode_data *data,
|
|
|
|
struct scsi_sense_hdr *sshdr)
|
2005-04-16 22:20:36 +00:00
|
|
|
{
|
2005-08-28 16:33:52 +00:00
|
|
|
return scsi_mode_sense(sdp, dbd, modepage, buffer, len,
|
2005-08-28 16:27:01 +00:00
|
|
|
SD_TIMEOUT, SD_MAX_RETRIES, data,
|
2005-08-28 16:33:52 +00:00
|
|
|
sshdr);
|
2005-04-16 22:20:36 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* read write protect setting, if possible - called only in sd_revalidate_disk()
|
2006-02-26 14:34:10 +00:00
|
|
|
* called with buffer of length SD_BUF_SIZE
|
2005-04-16 22:20:36 +00:00
|
|
|
*/
|
|
|
|
static void
|
2007-02-28 03:40:55 +00:00
|
|
|
sd_read_write_protect_flag(struct scsi_disk *sdkp, unsigned char *buffer)
|
2005-08-28 16:33:52 +00:00
|
|
|
{
|
2005-04-16 22:20:36 +00:00
|
|
|
int res;
|
2005-08-28 16:33:52 +00:00
|
|
|
struct scsi_device *sdp = sdkp->device;
|
2005-04-16 22:20:36 +00:00
|
|
|
struct scsi_mode_data data;
|
2009-03-09 15:33:31 +00:00
|
|
|
int old_wp = sdkp->write_prot;
|
2005-04-16 22:20:36 +00:00
|
|
|
|
|
|
|
set_disk_ro(sdkp->disk, 0);
|
2005-08-28 16:33:52 +00:00
|
|
|
if (sdp->skip_ms_page_3f) {
|
2014-01-03 23:19:26 +00:00
|
|
|
sd_first_printk(KERN_NOTICE, sdkp, "Assuming Write Enabled\n");
|
2005-04-16 22:20:36 +00:00
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
2005-08-28 16:33:52 +00:00
|
|
|
if (sdp->use_192_bytes_for_3f) {
|
|
|
|
res = sd_do_mode_sense(sdp, 0, 0x3F, buffer, 192, &data, NULL);
|
2005-04-16 22:20:36 +00:00
|
|
|
} else {
|
|
|
|
/*
|
|
|
|
* First attempt: ask for all pages (0x3F), but only 4 bytes.
|
|
|
|
* We have to start carefully: some devices hang if we ask
|
|
|
|
* for more than is available.
|
|
|
|
*/
|
2005-08-28 16:33:52 +00:00
|
|
|
res = sd_do_mode_sense(sdp, 0, 0x3F, buffer, 4, &data, NULL);
|
2005-04-16 22:20:36 +00:00
|
|
|
|
|
|
|
/*
|
|
|
|
* Second attempt: ask for page 0 When only page 0 is
|
|
|
|
* implemented, a request for page 3F may return Sense Key
|
|
|
|
* 5: Illegal Request, Sense Code 24: Invalid field in
|
|
|
|
* CDB.
|
|
|
|
*/
|
|
|
|
if (!scsi_status_is_good(res))
|
2005-08-28 16:33:52 +00:00
|
|
|
res = sd_do_mode_sense(sdp, 0, 0, buffer, 4, &data, NULL);
|
2005-04-16 22:20:36 +00:00
|
|
|
|
|
|
|
/*
|
|
|
|
* Third attempt: ask 255 bytes, as we did earlier.
|
|
|
|
*/
|
|
|
|
if (!scsi_status_is_good(res))
|
2005-08-28 16:33:52 +00:00
|
|
|
res = sd_do_mode_sense(sdp, 0, 0x3F, buffer, 255,
|
|
|
|
&data, NULL);
|
2005-04-16 22:20:36 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
if (!scsi_status_is_good(res)) {
|
2014-01-03 23:19:26 +00:00
|
|
|
sd_first_printk(KERN_WARNING, sdkp,
|
2007-02-28 03:40:55 +00:00
|
|
|
"Test WP failed, assume Write Enabled\n");
|
2005-04-16 22:20:36 +00:00
|
|
|
} else {
|
|
|
|
sdkp->write_prot = ((data.device_specific & 0x80) != 0);
|
|
|
|
set_disk_ro(sdkp->disk, sdkp->write_prot);
|
2009-03-09 15:33:31 +00:00
|
|
|
if (sdkp->first_scan || old_wp != sdkp->write_prot) {
|
|
|
|
sd_printk(KERN_NOTICE, sdkp, "Write Protect is %s\n",
|
|
|
|
sdkp->write_prot ? "on" : "off");
|
|
|
|
sd_printk(KERN_DEBUG, sdkp,
|
|
|
|
"Mode Sense: %02x %02x %02x %02x\n",
|
|
|
|
buffer[0], buffer[1], buffer[2], buffer[3]);
|
|
|
|
}
|
2005-04-16 22:20:36 +00:00
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* sd_read_cache_type - called only from sd_revalidate_disk()
|
2006-02-26 14:34:10 +00:00
|
|
|
* called with buffer of length SD_BUF_SIZE
|
2005-04-16 22:20:36 +00:00
|
|
|
*/
|
|
|
|
static void
|
2007-02-28 03:40:55 +00:00
|
|
|
sd_read_cache_type(struct scsi_disk *sdkp, unsigned char *buffer)
|
2005-05-16 00:59:55 +00:00
|
|
|
{
|
2005-04-16 22:20:36 +00:00
|
|
|
int len = 0, res;
|
2005-08-28 16:33:52 +00:00
|
|
|
struct scsi_device *sdp = sdkp->device;
|
2005-04-16 22:20:36 +00:00
|
|
|
|
2005-05-16 00:59:55 +00:00
|
|
|
int dbd;
|
|
|
|
int modepage;
|
[SCSI] Retrieve the Caching mode page (version 2)
Some kernel transport drivers unconditionally disable
retrieval of the Caching mode page. One such for example is
the BBB/CBI transport over USB. Such a restraint is too
harsh as some devices do support the Caching mode
page. Unconditionally enabling the retrieval of this mode
page over those transports at their transport code level may
result in some devices failing and becoming unusable.
This patch implements a method of retrieving the Caching
mode page without unconditionally enabling it in the
transports which unconditionally disable it. The idea is to
ask for all supported pages, page code 0x3F, and then search
for the Caching mode page in the mode parameter data
returned. The sd driver already asks for all the mode pages
supported by the attached device by setting the page code to
0x3F in order to find out if the media is write protected by
reading the WP bit in the Device Specific Parameter
field. It then attempts to retrieve only the Caching mode
page by setting the page code to 8 and actually attempting
to retrieve it if and only if the transport allows it.
The method implemented here is that if the transport doesn't
allow retrieval of the Caching mode page and the device is
not RBC, then we ask for all pages supported by setting the
page code to 0x3F (similarly to how the WP bit is retrieved
above), and then we search for the Caching mode page in the
mode parameter data returned.
With this patch, devices over SATA, report this (no change):
Oct 22 18:45:58 localhost kernel: sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
Oct 22 18:45:58 localhost kernel: sd 0:0:0:0: Attached scsi generic sg0 type 0
Oct 22 18:45:58 localhost kernel: sd 0:0:0:0: [sda] Write Protect is off
Oct 22 18:45:58 localhost kernel: sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
Oct 22 18:45:58 localhost kernel: sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Smart devices report their Caching mode page. This is a
change where we'd previously see the kernel making
assumption about the device's cache being write-through:
Oct 22 18:45:58 localhost kernel: sd 6:0:0:0: Attached scsi generic sg2 type 0
Oct 22 18:45:58 localhost kernel: sd 6:0:0:0: [sdb] 610472646 4096-byte logical blocks: (2.50 TB/2.27 TiB)
Oct 22 18:45:58 localhost kernel: sd 6:0:0:0: [sdb] Write Protect is off
Oct 22 18:45:58 localhost kernel: sd 6:0:0:0: [sdb] Mode Sense: 47 00 10 08
Oct 22 18:45:58 localhost kernel: sd 6:0:0:0: [sdb] Write cache: enabled, read cache: enabled, supports DPO and FUA
And "dumb" devices over BBB, are correctly shown not to
support reporting the Caching mode page:
Oct 22 18:49:06 localhost kernel: sd 7:0:0:0: [sdc] 15663104 512-byte logical blocks: (8.01 GB/7.46 GiB)
Oct 22 18:49:06 localhost kernel: sd 7:0:0:0: [sdc] Write Protect is off
Oct 22 18:49:06 localhost kernel: sd 7:0:0:0: [sdc] Mode Sense: 23 00 00 00
Oct 22 18:49:06 localhost kernel: sd 7:0:0:0: [sdc] No Caching mode page present
Oct 22 18:49:06 localhost kernel: sd 7:0:0:0: [sdc] Assuming drive cache: write through
Version 2 adds this:
Some devices don't support page code 0x3F, and others require a
fixed transfer length of 192 bytes. This single commit includes a
patch by Alan Stern which fixes this.
Reported-and-tested-by: Richard Senior <richard@r-senior.demon.co.uk>
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Luben Tuikov <ltuikov@yahoo.com>
Signed-off-by: James Bottomley <jbottomley@parallels.com>
2011-05-19 07:00:58 +00:00
|
|
|
int first_len;
|
2005-04-16 22:20:36 +00:00
|
|
|
struct scsi_mode_data data;
|
|
|
|
struct scsi_sense_hdr sshdr;
|
2009-03-09 15:33:31 +00:00
|
|
|
int old_wce = sdkp->WCE;
|
|
|
|
int old_rcd = sdkp->RCD;
|
|
|
|
int old_dpofua = sdkp->DPOFUA;
|
2005-04-16 22:20:36 +00:00
|
|
|
|
2013-04-24 21:02:53 +00:00
|
|
|
|
|
|
|
if (sdkp->cache_override)
|
|
|
|
return;
|
|
|
|
|
[SCSI] Retrieve the Caching mode page (version 2)
Some kernel transport drivers unconditionally disable
retrieval of the Caching mode page. One such for example is
the BBB/CBI transport over USB. Such a restraint is too
harsh as some devices do support the Caching mode
page. Unconditionally enabling the retrieval of this mode
page over those transports at their transport code level may
result in some devices failing and becoming unusable.
This patch implements a method of retrieving the Caching
mode page without unconditionally enabling it in the
transports which unconditionally disable it. The idea is to
ask for all supported pages, page code 0x3F, and then search
for the Caching mode page in the mode parameter data
returned. The sd driver already asks for all the mode pages
supported by the attached device by setting the page code to
0x3F in order to find out if the media is write protected by
reading the WP bit in the Device Specific Parameter
field. It then attempts to retrieve only the Caching mode
page by setting the page code to 8 and actually attempting
to retrieve it if and only if the transport allows it.
The method implemented here is that if the transport doesn't
allow retrieval of the Caching mode page and the device is
not RBC, then we ask for all pages supported by setting the
page code to 0x3F (similarly to how the WP bit is retrieved
above), and then we search for the Caching mode page in the
mode parameter data returned.
With this patch, devices over SATA, report this (no change):
Oct 22 18:45:58 localhost kernel: sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
Oct 22 18:45:58 localhost kernel: sd 0:0:0:0: Attached scsi generic sg0 type 0
Oct 22 18:45:58 localhost kernel: sd 0:0:0:0: [sda] Write Protect is off
Oct 22 18:45:58 localhost kernel: sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
Oct 22 18:45:58 localhost kernel: sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Smart devices report their Caching mode page. This is a
change where we'd previously see the kernel making
assumption about the device's cache being write-through:
Oct 22 18:45:58 localhost kernel: sd 6:0:0:0: Attached scsi generic sg2 type 0
Oct 22 18:45:58 localhost kernel: sd 6:0:0:0: [sdb] 610472646 4096-byte logical blocks: (2.50 TB/2.27 TiB)
Oct 22 18:45:58 localhost kernel: sd 6:0:0:0: [sdb] Write Protect is off
Oct 22 18:45:58 localhost kernel: sd 6:0:0:0: [sdb] Mode Sense: 47 00 10 08
Oct 22 18:45:58 localhost kernel: sd 6:0:0:0: [sdb] Write cache: enabled, read cache: enabled, supports DPO and FUA
And "dumb" devices over BBB, are correctly shown not to
support reporting the Caching mode page:
Oct 22 18:49:06 localhost kernel: sd 7:0:0:0: [sdc] 15663104 512-byte logical blocks: (8.01 GB/7.46 GiB)
Oct 22 18:49:06 localhost kernel: sd 7:0:0:0: [sdc] Write Protect is off
Oct 22 18:49:06 localhost kernel: sd 7:0:0:0: [sdc] Mode Sense: 23 00 00 00
Oct 22 18:49:06 localhost kernel: sd 7:0:0:0: [sdc] No Caching mode page present
Oct 22 18:49:06 localhost kernel: sd 7:0:0:0: [sdc] Assuming drive cache: write through
Version 2 adds this:
Some devices don't support page code 0x3F, and others require a
fixed transfer length of 192 bytes. This single commit includes a
patch by Alan Stern which fixes this.
Reported-and-tested-by: Richard Senior <richard@r-senior.demon.co.uk>
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Luben Tuikov <ltuikov@yahoo.com>
Signed-off-by: James Bottomley <jbottomley@parallels.com>
2011-05-19 07:00:58 +00:00
|
|
|
first_len = 4;
|
|
|
|
if (sdp->skip_ms_page_8) {
|
|
|
|
if (sdp->type == TYPE_RBC)
|
|
|
|
goto defaults;
|
|
|
|
else {
|
|
|
|
if (sdp->skip_ms_page_3f)
|
|
|
|
goto defaults;
|
|
|
|
modepage = 0x3F;
|
|
|
|
if (sdp->use_192_bytes_for_3f)
|
|
|
|
first_len = 192;
|
|
|
|
dbd = 0;
|
|
|
|
}
|
|
|
|
} else if (sdp->type == TYPE_RBC) {
|
2005-05-16 00:59:55 +00:00
|
|
|
modepage = 6;
|
|
|
|
dbd = 8;
|
|
|
|
} else {
|
|
|
|
modepage = 8;
|
|
|
|
dbd = 0;
|
|
|
|
}
|
|
|
|
|
2005-04-16 22:20:36 +00:00
|
|
|
/* cautiously ask */
|
[SCSI] Retrieve the Caching mode page (version 2)
Some kernel transport drivers unconditionally disable
retrieval of the Caching mode page. One such for example is
the BBB/CBI transport over USB. Such a restraint is too
harsh as some devices do support the Caching mode
page. Unconditionally enabling the retrieval of this mode
page over those transports at their transport code level may
result in some devices failing and becoming unusable.
This patch implements a method of retrieving the Caching
mode page without unconditionally enabling it in the
transports which unconditionally disable it. The idea is to
ask for all supported pages, page code 0x3F, and then search
for the Caching mode page in the mode parameter data
returned. The sd driver already asks for all the mode pages
supported by the attached device by setting the page code to
0x3F in order to find out if the media is write protected by
reading the WP bit in the Device Specific Parameter
field. It then attempts to retrieve only the Caching mode
page by setting the page code to 8 and actually attempting
to retrieve it if and only if the transport allows it.
The method implemented here is that if the transport doesn't
allow retrieval of the Caching mode page and the device is
not RBC, then we ask for all pages supported by setting the
page code to 0x3F (similarly to how the WP bit is retrieved
above), and then we search for the Caching mode page in the
mode parameter data returned.
With this patch, devices over SATA, report this (no change):
Oct 22 18:45:58 localhost kernel: sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
Oct 22 18:45:58 localhost kernel: sd 0:0:0:0: Attached scsi generic sg0 type 0
Oct 22 18:45:58 localhost kernel: sd 0:0:0:0: [sda] Write Protect is off
Oct 22 18:45:58 localhost kernel: sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
Oct 22 18:45:58 localhost kernel: sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Smart devices report their Caching mode page. This is a
change where we'd previously see the kernel making
assumption about the device's cache being write-through:
Oct 22 18:45:58 localhost kernel: sd 6:0:0:0: Attached scsi generic sg2 type 0
Oct 22 18:45:58 localhost kernel: sd 6:0:0:0: [sdb] 610472646 4096-byte logical blocks: (2.50 TB/2.27 TiB)
Oct 22 18:45:58 localhost kernel: sd 6:0:0:0: [sdb] Write Protect is off
Oct 22 18:45:58 localhost kernel: sd 6:0:0:0: [sdb] Mode Sense: 47 00 10 08
Oct 22 18:45:58 localhost kernel: sd 6:0:0:0: [sdb] Write cache: enabled, read cache: enabled, supports DPO and FUA
And "dumb" devices over BBB, are correctly shown not to
support reporting the Caching mode page:
Oct 22 18:49:06 localhost kernel: sd 7:0:0:0: [sdc] 15663104 512-byte logical blocks: (8.01 GB/7.46 GiB)
Oct 22 18:49:06 localhost kernel: sd 7:0:0:0: [sdc] Write Protect is off
Oct 22 18:49:06 localhost kernel: sd 7:0:0:0: [sdc] Mode Sense: 23 00 00 00
Oct 22 18:49:06 localhost kernel: sd 7:0:0:0: [sdc] No Caching mode page present
Oct 22 18:49:06 localhost kernel: sd 7:0:0:0: [sdc] Assuming drive cache: write through
Version 2 adds this:
Some devices don't support page code 0x3F, and others require a
fixed transfer length of 192 bytes. This single commit includes a
patch by Alan Stern which fixes this.
Reported-and-tested-by: Richard Senior <richard@r-senior.demon.co.uk>
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Luben Tuikov <ltuikov@yahoo.com>
Signed-off-by: James Bottomley <jbottomley@parallels.com>
2011-05-19 07:00:58 +00:00
|
|
|
res = sd_do_mode_sense(sdp, dbd, modepage, buffer, first_len,
|
|
|
|
&data, &sshdr);
|
2005-04-16 22:20:36 +00:00
|
|
|
|
|
|
|
if (!scsi_status_is_good(res))
|
|
|
|
goto bad_sense;
|
|
|
|
|
2006-02-23 01:03:16 +00:00
|
|
|
if (!data.header_length) {
|
|
|
|
modepage = 6;
|
[SCSI] Retrieve the Caching mode page (version 2)
Some kernel transport drivers unconditionally disable
retrieval of the Caching mode page. One such for example is
the BBB/CBI transport over USB. Such a restraint is too
harsh as some devices do support the Caching mode
page. Unconditionally enabling the retrieval of this mode
page over those transports at their transport code level may
result in some devices failing and becoming unusable.
This patch implements a method of retrieving the Caching
mode page without unconditionally enabling it in the
transports which unconditionally disable it. The idea is to
ask for all supported pages, page code 0x3F, and then search
for the Caching mode page in the mode parameter data
returned. The sd driver already asks for all the mode pages
supported by the attached device by setting the page code to
0x3F in order to find out if the media is write protected by
reading the WP bit in the Device Specific Parameter
field. It then attempts to retrieve only the Caching mode
page by setting the page code to 8 and actually attempting
to retrieve it if and only if the transport allows it.
The method implemented here is that if the transport doesn't
allow retrieval of the Caching mode page and the device is
not RBC, then we ask for all pages supported by setting the
page code to 0x3F (similarly to how the WP bit is retrieved
above), and then we search for the Caching mode page in the
mode parameter data returned.
With this patch, devices over SATA, report this (no change):
Oct 22 18:45:58 localhost kernel: sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
Oct 22 18:45:58 localhost kernel: sd 0:0:0:0: Attached scsi generic sg0 type 0
Oct 22 18:45:58 localhost kernel: sd 0:0:0:0: [sda] Write Protect is off
Oct 22 18:45:58 localhost kernel: sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
Oct 22 18:45:58 localhost kernel: sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Smart devices report their Caching mode page. This is a
change where we'd previously see the kernel making
assumption about the device's cache being write-through:
Oct 22 18:45:58 localhost kernel: sd 6:0:0:0: Attached scsi generic sg2 type 0
Oct 22 18:45:58 localhost kernel: sd 6:0:0:0: [sdb] 610472646 4096-byte logical blocks: (2.50 TB/2.27 TiB)
Oct 22 18:45:58 localhost kernel: sd 6:0:0:0: [sdb] Write Protect is off
Oct 22 18:45:58 localhost kernel: sd 6:0:0:0: [sdb] Mode Sense: 47 00 10 08
Oct 22 18:45:58 localhost kernel: sd 6:0:0:0: [sdb] Write cache: enabled, read cache: enabled, supports DPO and FUA
And "dumb" devices over BBB, are correctly shown not to
support reporting the Caching mode page:
Oct 22 18:49:06 localhost kernel: sd 7:0:0:0: [sdc] 15663104 512-byte logical blocks: (8.01 GB/7.46 GiB)
Oct 22 18:49:06 localhost kernel: sd 7:0:0:0: [sdc] Write Protect is off
Oct 22 18:49:06 localhost kernel: sd 7:0:0:0: [sdc] Mode Sense: 23 00 00 00
Oct 22 18:49:06 localhost kernel: sd 7:0:0:0: [sdc] No Caching mode page present
Oct 22 18:49:06 localhost kernel: sd 7:0:0:0: [sdc] Assuming drive cache: write through
Version 2 adds this:
Some devices don't support page code 0x3F, and others require a
fixed transfer length of 192 bytes. This single commit includes a
patch by Alan Stern which fixes this.
Reported-and-tested-by: Richard Senior <richard@r-senior.demon.co.uk>
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Luben Tuikov <ltuikov@yahoo.com>
Signed-off-by: James Bottomley <jbottomley@parallels.com>
2011-05-19 07:00:58 +00:00
|
|
|
first_len = 0;
|
2014-01-03 23:19:26 +00:00
|
|
|
sd_first_printk(KERN_ERR, sdkp,
|
|
|
|
"Missing header in MODE_SENSE response\n");
|
2006-02-23 01:03:16 +00:00
|
|
|
}
|
|
|
|
|
2005-04-16 22:20:36 +00:00
|
|
|
/* that went OK, now ask for the proper length */
|
|
|
|
len = data.length;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* We're only interested in the first three bytes, actually.
|
|
|
|
* But the data cache page is defined for the first 20.
|
|
|
|
*/
|
|
|
|
if (len < 3)
|
|
|
|
goto bad_sense;
|
[SCSI] Retrieve the Caching mode page (version 2)
Some kernel transport drivers unconditionally disable
retrieval of the Caching mode page. One such for example is
the BBB/CBI transport over USB. Such a restraint is too
harsh as some devices do support the Caching mode
page. Unconditionally enabling the retrieval of this mode
page over those transports at their transport code level may
result in some devices failing and becoming unusable.
This patch implements a method of retrieving the Caching
mode page without unconditionally enabling it in the
transports which unconditionally disable it. The idea is to
ask for all supported pages, page code 0x3F, and then search
for the Caching mode page in the mode parameter data
returned. The sd driver already asks for all the mode pages
supported by the attached device by setting the page code to
0x3F in order to find out if the media is write protected by
reading the WP bit in the Device Specific Parameter
field. It then attempts to retrieve only the Caching mode
page by setting the page code to 8 and actually attempting
to retrieve it if and only if the transport allows it.
The method implemented here is that if the transport doesn't
allow retrieval of the Caching mode page and the device is
not RBC, then we ask for all pages supported by setting the
page code to 0x3F (similarly to how the WP bit is retrieved
above), and then we search for the Caching mode page in the
mode parameter data returned.
With this patch, devices over SATA, report this (no change):
Oct 22 18:45:58 localhost kernel: sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
Oct 22 18:45:58 localhost kernel: sd 0:0:0:0: Attached scsi generic sg0 type 0
Oct 22 18:45:58 localhost kernel: sd 0:0:0:0: [sda] Write Protect is off
Oct 22 18:45:58 localhost kernel: sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
Oct 22 18:45:58 localhost kernel: sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Smart devices report their Caching mode page. This is a
change where we'd previously see the kernel making
assumption about the device's cache being write-through:
Oct 22 18:45:58 localhost kernel: sd 6:0:0:0: Attached scsi generic sg2 type 0
Oct 22 18:45:58 localhost kernel: sd 6:0:0:0: [sdb] 610472646 4096-byte logical blocks: (2.50 TB/2.27 TiB)
Oct 22 18:45:58 localhost kernel: sd 6:0:0:0: [sdb] Write Protect is off
Oct 22 18:45:58 localhost kernel: sd 6:0:0:0: [sdb] Mode Sense: 47 00 10 08
Oct 22 18:45:58 localhost kernel: sd 6:0:0:0: [sdb] Write cache: enabled, read cache: enabled, supports DPO and FUA
And "dumb" devices over BBB, are correctly shown not to
support reporting the Caching mode page:
Oct 22 18:49:06 localhost kernel: sd 7:0:0:0: [sdc] 15663104 512-byte logical blocks: (8.01 GB/7.46 GiB)
Oct 22 18:49:06 localhost kernel: sd 7:0:0:0: [sdc] Write Protect is off
Oct 22 18:49:06 localhost kernel: sd 7:0:0:0: [sdc] Mode Sense: 23 00 00 00
Oct 22 18:49:06 localhost kernel: sd 7:0:0:0: [sdc] No Caching mode page present
Oct 22 18:49:06 localhost kernel: sd 7:0:0:0: [sdc] Assuming drive cache: write through
Version 2 adds this:
Some devices don't support page code 0x3F, and others require a
fixed transfer length of 192 bytes. This single commit includes a
patch by Alan Stern which fixes this.
Reported-and-tested-by: Richard Senior <richard@r-senior.demon.co.uk>
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Luben Tuikov <ltuikov@yahoo.com>
Signed-off-by: James Bottomley <jbottomley@parallels.com>
2011-05-19 07:00:58 +00:00
|
|
|
else if (len > SD_BUF_SIZE) {
|
2014-01-03 23:19:26 +00:00
|
|
|
sd_first_printk(KERN_NOTICE, sdkp, "Truncating mode parameter "
|
[SCSI] Retrieve the Caching mode page (version 2)
Some kernel transport drivers unconditionally disable
retrieval of the Caching mode page. One such for example is
the BBB/CBI transport over USB. Such a restraint is too
harsh as some devices do support the Caching mode
page. Unconditionally enabling the retrieval of this mode
page over those transports at their transport code level may
result in some devices failing and becoming unusable.
This patch implements a method of retrieving the Caching
mode page without unconditionally enabling it in the
transports which unconditionally disable it. The idea is to
ask for all supported pages, page code 0x3F, and then search
for the Caching mode page in the mode parameter data
returned. The sd driver already asks for all the mode pages
supported by the attached device by setting the page code to
0x3F in order to find out if the media is write protected by
reading the WP bit in the Device Specific Parameter
field. It then attempts to retrieve only the Caching mode
page by setting the page code to 8 and actually attempting
to retrieve it if and only if the transport allows it.
The method implemented here is that if the transport doesn't
allow retrieval of the Caching mode page and the device is
not RBC, then we ask for all pages supported by setting the
page code to 0x3F (similarly to how the WP bit is retrieved
above), and then we search for the Caching mode page in the
mode parameter data returned.
With this patch, devices over SATA, report this (no change):
Oct 22 18:45:58 localhost kernel: sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
Oct 22 18:45:58 localhost kernel: sd 0:0:0:0: Attached scsi generic sg0 type 0
Oct 22 18:45:58 localhost kernel: sd 0:0:0:0: [sda] Write Protect is off
Oct 22 18:45:58 localhost kernel: sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
Oct 22 18:45:58 localhost kernel: sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Smart devices report their Caching mode page. This is a
change where we'd previously see the kernel making
assumption about the device's cache being write-through:
Oct 22 18:45:58 localhost kernel: sd 6:0:0:0: Attached scsi generic sg2 type 0
Oct 22 18:45:58 localhost kernel: sd 6:0:0:0: [sdb] 610472646 4096-byte logical blocks: (2.50 TB/2.27 TiB)
Oct 22 18:45:58 localhost kernel: sd 6:0:0:0: [sdb] Write Protect is off
Oct 22 18:45:58 localhost kernel: sd 6:0:0:0: [sdb] Mode Sense: 47 00 10 08
Oct 22 18:45:58 localhost kernel: sd 6:0:0:0: [sdb] Write cache: enabled, read cache: enabled, supports DPO and FUA
And "dumb" devices over BBB, are correctly shown not to
support reporting the Caching mode page:
Oct 22 18:49:06 localhost kernel: sd 7:0:0:0: [sdc] 15663104 512-byte logical blocks: (8.01 GB/7.46 GiB)
Oct 22 18:49:06 localhost kernel: sd 7:0:0:0: [sdc] Write Protect is off
Oct 22 18:49:06 localhost kernel: sd 7:0:0:0: [sdc] Mode Sense: 23 00 00 00
Oct 22 18:49:06 localhost kernel: sd 7:0:0:0: [sdc] No Caching mode page present
Oct 22 18:49:06 localhost kernel: sd 7:0:0:0: [sdc] Assuming drive cache: write through
Version 2 adds this:
Some devices don't support page code 0x3F, and others require a
fixed transfer length of 192 bytes. This single commit includes a
patch by Alan Stern which fixes this.
Reported-and-tested-by: Richard Senior <richard@r-senior.demon.co.uk>
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Luben Tuikov <ltuikov@yahoo.com>
Signed-off-by: James Bottomley <jbottomley@parallels.com>
2011-05-19 07:00:58 +00:00
|
|
|
"data from %d to %d bytes\n", len, SD_BUF_SIZE);
|
|
|
|
len = SD_BUF_SIZE;
|
|
|
|
}
|
|
|
|
if (modepage == 0x3F && sdp->use_192_bytes_for_3f)
|
|
|
|
len = 192;
|
2005-04-16 22:20:36 +00:00
|
|
|
|
|
|
|
/* Get the data */
|
[SCSI] Retrieve the Caching mode page (version 2)
Some kernel transport drivers unconditionally disable
retrieval of the Caching mode page. One such for example is
the BBB/CBI transport over USB. Such a restraint is too
harsh as some devices do support the Caching mode
page. Unconditionally enabling the retrieval of this mode
page over those transports at their transport code level may
result in some devices failing and becoming unusable.
This patch implements a method of retrieving the Caching
mode page without unconditionally enabling it in the
transports which unconditionally disable it. The idea is to
ask for all supported pages, page code 0x3F, and then search
for the Caching mode page in the mode parameter data
returned. The sd driver already asks for all the mode pages
supported by the attached device by setting the page code to
0x3F in order to find out if the media is write protected by
reading the WP bit in the Device Specific Parameter
field. It then attempts to retrieve only the Caching mode
page by setting the page code to 8 and actually attempting
to retrieve it if and only if the transport allows it.
The method implemented here is that if the transport doesn't
allow retrieval of the Caching mode page and the device is
not RBC, then we ask for all pages supported by setting the
page code to 0x3F (similarly to how the WP bit is retrieved
above), and then we search for the Caching mode page in the
mode parameter data returned.
With this patch, devices over SATA, report this (no change):
Oct 22 18:45:58 localhost kernel: sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
Oct 22 18:45:58 localhost kernel: sd 0:0:0:0: Attached scsi generic sg0 type 0
Oct 22 18:45:58 localhost kernel: sd 0:0:0:0: [sda] Write Protect is off
Oct 22 18:45:58 localhost kernel: sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
Oct 22 18:45:58 localhost kernel: sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Smart devices report their Caching mode page. This is a
change where we'd previously see the kernel making
assumption about the device's cache being write-through:
Oct 22 18:45:58 localhost kernel: sd 6:0:0:0: Attached scsi generic sg2 type 0
Oct 22 18:45:58 localhost kernel: sd 6:0:0:0: [sdb] 610472646 4096-byte logical blocks: (2.50 TB/2.27 TiB)
Oct 22 18:45:58 localhost kernel: sd 6:0:0:0: [sdb] Write Protect is off
Oct 22 18:45:58 localhost kernel: sd 6:0:0:0: [sdb] Mode Sense: 47 00 10 08
Oct 22 18:45:58 localhost kernel: sd 6:0:0:0: [sdb] Write cache: enabled, read cache: enabled, supports DPO and FUA
And "dumb" devices over BBB, are correctly shown not to
support reporting the Caching mode page:
Oct 22 18:49:06 localhost kernel: sd 7:0:0:0: [sdc] 15663104 512-byte logical blocks: (8.01 GB/7.46 GiB)
Oct 22 18:49:06 localhost kernel: sd 7:0:0:0: [sdc] Write Protect is off
Oct 22 18:49:06 localhost kernel: sd 7:0:0:0: [sdc] Mode Sense: 23 00 00 00
Oct 22 18:49:06 localhost kernel: sd 7:0:0:0: [sdc] No Caching mode page present
Oct 22 18:49:06 localhost kernel: sd 7:0:0:0: [sdc] Assuming drive cache: write through
Version 2 adds this:
Some devices don't support page code 0x3F, and others require a
fixed transfer length of 192 bytes. This single commit includes a
patch by Alan Stern which fixes this.
Reported-and-tested-by: Richard Senior <richard@r-senior.demon.co.uk>
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Luben Tuikov <ltuikov@yahoo.com>
Signed-off-by: James Bottomley <jbottomley@parallels.com>
2011-05-19 07:00:58 +00:00
|
|
|
if (len > first_len)
|
|
|
|
res = sd_do_mode_sense(sdp, dbd, modepage, buffer, len,
|
|
|
|
&data, &sshdr);
|
2005-04-16 22:20:36 +00:00
|
|
|
|
|
|
|
if (scsi_status_is_good(res)) {
|
2005-05-16 00:59:55 +00:00
|
|
|
int offset = data.header_length + data.block_descriptor_length;
|
2005-04-16 22:20:36 +00:00
|
|
|
|
[SCSI] Retrieve the Caching mode page (version 2)
Some kernel transport drivers unconditionally disable
retrieval of the Caching mode page. One such for example is
the BBB/CBI transport over USB. Such a restraint is too
harsh as some devices do support the Caching mode
page. Unconditionally enabling the retrieval of this mode
page over those transports at their transport code level may
result in some devices failing and becoming unusable.
This patch implements a method of retrieving the Caching
mode page without unconditionally enabling it in the
transports which unconditionally disable it. The idea is to
ask for all supported pages, page code 0x3F, and then search
for the Caching mode page in the mode parameter data
returned. The sd driver already asks for all the mode pages
supported by the attached device by setting the page code to
0x3F in order to find out if the media is write protected by
reading the WP bit in the Device Specific Parameter
field. It then attempts to retrieve only the Caching mode
page by setting the page code to 8 and actually attempting
to retrieve it if and only if the transport allows it.
The method implemented here is that if the transport doesn't
allow retrieval of the Caching mode page and the device is
not RBC, then we ask for all pages supported by setting the
page code to 0x3F (similarly to how the WP bit is retrieved
above), and then we search for the Caching mode page in the
mode parameter data returned.
With this patch, devices over SATA, report this (no change):
Oct 22 18:45:58 localhost kernel: sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
Oct 22 18:45:58 localhost kernel: sd 0:0:0:0: Attached scsi generic sg0 type 0
Oct 22 18:45:58 localhost kernel: sd 0:0:0:0: [sda] Write Protect is off
Oct 22 18:45:58 localhost kernel: sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
Oct 22 18:45:58 localhost kernel: sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Smart devices report their Caching mode page. This is a
change where we'd previously see the kernel making
assumption about the device's cache being write-through:
Oct 22 18:45:58 localhost kernel: sd 6:0:0:0: Attached scsi generic sg2 type 0
Oct 22 18:45:58 localhost kernel: sd 6:0:0:0: [sdb] 610472646 4096-byte logical blocks: (2.50 TB/2.27 TiB)
Oct 22 18:45:58 localhost kernel: sd 6:0:0:0: [sdb] Write Protect is off
Oct 22 18:45:58 localhost kernel: sd 6:0:0:0: [sdb] Mode Sense: 47 00 10 08
Oct 22 18:45:58 localhost kernel: sd 6:0:0:0: [sdb] Write cache: enabled, read cache: enabled, supports DPO and FUA
And "dumb" devices over BBB, are correctly shown not to
support reporting the Caching mode page:
Oct 22 18:49:06 localhost kernel: sd 7:0:0:0: [sdc] 15663104 512-byte logical blocks: (8.01 GB/7.46 GiB)
Oct 22 18:49:06 localhost kernel: sd 7:0:0:0: [sdc] Write Protect is off
Oct 22 18:49:06 localhost kernel: sd 7:0:0:0: [sdc] Mode Sense: 23 00 00 00
Oct 22 18:49:06 localhost kernel: sd 7:0:0:0: [sdc] No Caching mode page present
Oct 22 18:49:06 localhost kernel: sd 7:0:0:0: [sdc] Assuming drive cache: write through
Version 2 adds this:
Some devices don't support page code 0x3F, and others require a
fixed transfer length of 192 bytes. This single commit includes a
patch by Alan Stern which fixes this.
Reported-and-tested-by: Richard Senior <richard@r-senior.demon.co.uk>
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Luben Tuikov <ltuikov@yahoo.com>
Signed-off-by: James Bottomley <jbottomley@parallels.com>
2011-05-19 07:00:58 +00:00
|
|
|
while (offset < len) {
|
|
|
|
u8 page_code = buffer[offset] & 0x3F;
|
|
|
|
u8 spf = buffer[offset] & 0x40;
|
|
|
|
|
|
|
|
if (page_code == 8 || page_code == 6) {
|
|
|
|
/* We're interested only in the first 3 bytes.
|
|
|
|
*/
|
|
|
|
if (len - offset <= 2) {
|
2014-01-03 23:19:26 +00:00
|
|
|
sd_first_printk(KERN_ERR, sdkp,
|
|
|
|
"Incomplete mode parameter "
|
|
|
|
"data\n");
|
[SCSI] Retrieve the Caching mode page (version 2)
Some kernel transport drivers unconditionally disable
retrieval of the Caching mode page. One such for example is
the BBB/CBI transport over USB. Such a restraint is too
harsh as some devices do support the Caching mode
page. Unconditionally enabling the retrieval of this mode
page over those transports at their transport code level may
result in some devices failing and becoming unusable.
This patch implements a method of retrieving the Caching
mode page without unconditionally enabling it in the
transports which unconditionally disable it. The idea is to
ask for all supported pages, page code 0x3F, and then search
for the Caching mode page in the mode parameter data
returned. The sd driver already asks for all the mode pages
supported by the attached device by setting the page code to
0x3F in order to find out if the media is write protected by
reading the WP bit in the Device Specific Parameter
field. It then attempts to retrieve only the Caching mode
page by setting the page code to 8 and actually attempting
to retrieve it if and only if the transport allows it.
The method implemented here is that if the transport doesn't
allow retrieval of the Caching mode page and the device is
not RBC, then we ask for all pages supported by setting the
page code to 0x3F (similarly to how the WP bit is retrieved
above), and then we search for the Caching mode page in the
mode parameter data returned.
With this patch, devices over SATA, report this (no change):
Oct 22 18:45:58 localhost kernel: sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
Oct 22 18:45:58 localhost kernel: sd 0:0:0:0: Attached scsi generic sg0 type 0
Oct 22 18:45:58 localhost kernel: sd 0:0:0:0: [sda] Write Protect is off
Oct 22 18:45:58 localhost kernel: sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
Oct 22 18:45:58 localhost kernel: sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Smart devices report their Caching mode page. This is a
change where we'd previously see the kernel making
assumption about the device's cache being write-through:
Oct 22 18:45:58 localhost kernel: sd 6:0:0:0: Attached scsi generic sg2 type 0
Oct 22 18:45:58 localhost kernel: sd 6:0:0:0: [sdb] 610472646 4096-byte logical blocks: (2.50 TB/2.27 TiB)
Oct 22 18:45:58 localhost kernel: sd 6:0:0:0: [sdb] Write Protect is off
Oct 22 18:45:58 localhost kernel: sd 6:0:0:0: [sdb] Mode Sense: 47 00 10 08
Oct 22 18:45:58 localhost kernel: sd 6:0:0:0: [sdb] Write cache: enabled, read cache: enabled, supports DPO and FUA
And "dumb" devices over BBB, are correctly shown not to
support reporting the Caching mode page:
Oct 22 18:49:06 localhost kernel: sd 7:0:0:0: [sdc] 15663104 512-byte logical blocks: (8.01 GB/7.46 GiB)
Oct 22 18:49:06 localhost kernel: sd 7:0:0:0: [sdc] Write Protect is off
Oct 22 18:49:06 localhost kernel: sd 7:0:0:0: [sdc] Mode Sense: 23 00 00 00
Oct 22 18:49:06 localhost kernel: sd 7:0:0:0: [sdc] No Caching mode page present
Oct 22 18:49:06 localhost kernel: sd 7:0:0:0: [sdc] Assuming drive cache: write through
Version 2 adds this:
Some devices don't support page code 0x3F, and others require a
fixed transfer length of 192 bytes. This single commit includes a
patch by Alan Stern which fixes this.
Reported-and-tested-by: Richard Senior <richard@r-senior.demon.co.uk>
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Luben Tuikov <ltuikov@yahoo.com>
Signed-off-by: James Bottomley <jbottomley@parallels.com>
2011-05-19 07:00:58 +00:00
|
|
|
goto defaults;
|
|
|
|
} else {
|
|
|
|
modepage = page_code;
|
|
|
|
goto Page_found;
|
|
|
|
}
|
|
|
|
} else {
|
|
|
|
/* Go to the next page */
|
|
|
|
if (spf && len - offset > 3)
|
|
|
|
offset += 4 + (buffer[offset+2] << 8) +
|
|
|
|
buffer[offset+3];
|
|
|
|
else if (!spf && len - offset > 1)
|
|
|
|
offset += 2 + buffer[offset+1];
|
|
|
|
else {
|
2014-01-03 23:19:26 +00:00
|
|
|
sd_first_printk(KERN_ERR, sdkp,
|
|
|
|
"Incomplete mode "
|
|
|
|
"parameter data\n");
|
[SCSI] Retrieve the Caching mode page (version 2)
Some kernel transport drivers unconditionally disable
retrieval of the Caching mode page. One such for example is
the BBB/CBI transport over USB. Such a restraint is too
harsh as some devices do support the Caching mode
page. Unconditionally enabling the retrieval of this mode
page over those transports at their transport code level may
result in some devices failing and becoming unusable.
This patch implements a method of retrieving the Caching
mode page without unconditionally enabling it in the
transports which unconditionally disable it. The idea is to
ask for all supported pages, page code 0x3F, and then search
for the Caching mode page in the mode parameter data
returned. The sd driver already asks for all the mode pages
supported by the attached device by setting the page code to
0x3F in order to find out if the media is write protected by
reading the WP bit in the Device Specific Parameter
field. It then attempts to retrieve only the Caching mode
page by setting the page code to 8 and actually attempting
to retrieve it if and only if the transport allows it.
The method implemented here is that if the transport doesn't
allow retrieval of the Caching mode page and the device is
not RBC, then we ask for all pages supported by setting the
page code to 0x3F (similarly to how the WP bit is retrieved
above), and then we search for the Caching mode page in the
mode parameter data returned.
With this patch, devices over SATA, report this (no change):
Oct 22 18:45:58 localhost kernel: sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
Oct 22 18:45:58 localhost kernel: sd 0:0:0:0: Attached scsi generic sg0 type 0
Oct 22 18:45:58 localhost kernel: sd 0:0:0:0: [sda] Write Protect is off
Oct 22 18:45:58 localhost kernel: sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
Oct 22 18:45:58 localhost kernel: sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Smart devices report their Caching mode page. This is a
change where we'd previously see the kernel making
assumption about the device's cache being write-through:
Oct 22 18:45:58 localhost kernel: sd 6:0:0:0: Attached scsi generic sg2 type 0
Oct 22 18:45:58 localhost kernel: sd 6:0:0:0: [sdb] 610472646 4096-byte logical blocks: (2.50 TB/2.27 TiB)
Oct 22 18:45:58 localhost kernel: sd 6:0:0:0: [sdb] Write Protect is off
Oct 22 18:45:58 localhost kernel: sd 6:0:0:0: [sdb] Mode Sense: 47 00 10 08
Oct 22 18:45:58 localhost kernel: sd 6:0:0:0: [sdb] Write cache: enabled, read cache: enabled, supports DPO and FUA
And "dumb" devices over BBB, are correctly shown not to
support reporting the Caching mode page:
Oct 22 18:49:06 localhost kernel: sd 7:0:0:0: [sdc] 15663104 512-byte logical blocks: (8.01 GB/7.46 GiB)
Oct 22 18:49:06 localhost kernel: sd 7:0:0:0: [sdc] Write Protect is off
Oct 22 18:49:06 localhost kernel: sd 7:0:0:0: [sdc] Mode Sense: 23 00 00 00
Oct 22 18:49:06 localhost kernel: sd 7:0:0:0: [sdc] No Caching mode page present
Oct 22 18:49:06 localhost kernel: sd 7:0:0:0: [sdc] Assuming drive cache: write through
Version 2 adds this:
Some devices don't support page code 0x3F, and others require a
fixed transfer length of 192 bytes. This single commit includes a
patch by Alan Stern which fixes this.
Reported-and-tested-by: Richard Senior <richard@r-senior.demon.co.uk>
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Luben Tuikov <ltuikov@yahoo.com>
Signed-off-by: James Bottomley <jbottomley@parallels.com>
2011-05-19 07:00:58 +00:00
|
|
|
goto defaults;
|
|
|
|
}
|
|
|
|
}
|
2006-02-26 14:34:10 +00:00
|
|
|
}
|
|
|
|
|
2014-01-03 23:19:26 +00:00
|
|
|
sd_first_printk(KERN_ERR, sdkp, "No Caching mode page found\n");
|
2013-09-06 15:49:51 +00:00
|
|
|
goto defaults;
|
|
|
|
|
[SCSI] Retrieve the Caching mode page (version 2)
Some kernel transport drivers unconditionally disable
retrieval of the Caching mode page. One such for example is
the BBB/CBI transport over USB. Such a restraint is too
harsh as some devices do support the Caching mode
page. Unconditionally enabling the retrieval of this mode
page over those transports at their transport code level may
result in some devices failing and becoming unusable.
This patch implements a method of retrieving the Caching
mode page without unconditionally enabling it in the
transports which unconditionally disable it. The idea is to
ask for all supported pages, page code 0x3F, and then search
for the Caching mode page in the mode parameter data
returned. The sd driver already asks for all the mode pages
supported by the attached device by setting the page code to
0x3F in order to find out if the media is write protected by
reading the WP bit in the Device Specific Parameter
field. It then attempts to retrieve only the Caching mode
page by setting the page code to 8 and actually attempting
to retrieve it if and only if the transport allows it.
The method implemented here is that if the transport doesn't
allow retrieval of the Caching mode page and the device is
not RBC, then we ask for all pages supported by setting the
page code to 0x3F (similarly to how the WP bit is retrieved
above), and then we search for the Caching mode page in the
mode parameter data returned.
With this patch, devices over SATA, report this (no change):
Oct 22 18:45:58 localhost kernel: sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
Oct 22 18:45:58 localhost kernel: sd 0:0:0:0: Attached scsi generic sg0 type 0
Oct 22 18:45:58 localhost kernel: sd 0:0:0:0: [sda] Write Protect is off
Oct 22 18:45:58 localhost kernel: sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
Oct 22 18:45:58 localhost kernel: sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Smart devices report their Caching mode page. This is a
change where we'd previously see the kernel making
assumption about the device's cache being write-through:
Oct 22 18:45:58 localhost kernel: sd 6:0:0:0: Attached scsi generic sg2 type 0
Oct 22 18:45:58 localhost kernel: sd 6:0:0:0: [sdb] 610472646 4096-byte logical blocks: (2.50 TB/2.27 TiB)
Oct 22 18:45:58 localhost kernel: sd 6:0:0:0: [sdb] Write Protect is off
Oct 22 18:45:58 localhost kernel: sd 6:0:0:0: [sdb] Mode Sense: 47 00 10 08
Oct 22 18:45:58 localhost kernel: sd 6:0:0:0: [sdb] Write cache: enabled, read cache: enabled, supports DPO and FUA
And "dumb" devices over BBB, are correctly shown not to
support reporting the Caching mode page:
Oct 22 18:49:06 localhost kernel: sd 7:0:0:0: [sdc] 15663104 512-byte logical blocks: (8.01 GB/7.46 GiB)
Oct 22 18:49:06 localhost kernel: sd 7:0:0:0: [sdc] Write Protect is off
Oct 22 18:49:06 localhost kernel: sd 7:0:0:0: [sdc] Mode Sense: 23 00 00 00
Oct 22 18:49:06 localhost kernel: sd 7:0:0:0: [sdc] No Caching mode page present
Oct 22 18:49:06 localhost kernel: sd 7:0:0:0: [sdc] Assuming drive cache: write through
Version 2 adds this:
Some devices don't support page code 0x3F, and others require a
fixed transfer length of 192 bytes. This single commit includes a
patch by Alan Stern which fixes this.
Reported-and-tested-by: Richard Senior <richard@r-senior.demon.co.uk>
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Luben Tuikov <ltuikov@yahoo.com>
Signed-off-by: James Bottomley <jbottomley@parallels.com>
2011-05-19 07:00:58 +00:00
|
|
|
Page_found:
|
2005-05-16 00:59:55 +00:00
|
|
|
if (modepage == 8) {
|
|
|
|
sdkp->WCE = ((buffer[offset + 2] & 0x04) != 0);
|
|
|
|
sdkp->RCD = ((buffer[offset + 2] & 0x01) != 0);
|
|
|
|
} else {
|
|
|
|
sdkp->WCE = ((buffer[offset + 2] & 0x01) == 0);
|
|
|
|
sdkp->RCD = 0;
|
|
|
|
}
|
2005-04-16 22:20:36 +00:00
|
|
|
|
2006-01-06 08:53:52 +00:00
|
|
|
sdkp->DPOFUA = (data.device_specific & 0x10) != 0;
|
2014-06-30 15:04:21 +00:00
|
|
|
if (sdp->broken_fua) {
|
|
|
|
sd_first_printk(KERN_NOTICE, sdkp, "Disabling FUA\n");
|
|
|
|
sdkp->DPOFUA = 0;
|
|
|
|
} else if (sdkp->DPOFUA && !sdkp->device->use_10_for_rw) {
|
2014-01-03 23:19:26 +00:00
|
|
|
sd_first_printk(KERN_NOTICE, sdkp,
|
2007-02-28 03:40:55 +00:00
|
|
|
"Uses READ/WRITE(6), disabling FUA\n");
|
2006-01-06 08:53:52 +00:00
|
|
|
sdkp->DPOFUA = 0;
|
|
|
|
}
|
|
|
|
|
2014-08-11 12:40:37 +00:00
|
|
|
/* No cache flush allowed for write protected devices */
|
|
|
|
if (sdkp->WCE && sdkp->write_prot)
|
|
|
|
sdkp->WCE = 0;
|
|
|
|
|
2009-03-09 15:33:31 +00:00
|
|
|
if (sdkp->first_scan || old_wce != sdkp->WCE ||
|
|
|
|
old_rcd != sdkp->RCD || old_dpofua != sdkp->DPOFUA)
|
|
|
|
sd_printk(KERN_NOTICE, sdkp,
|
|
|
|
"Write cache: %s, read cache: %s, %s\n",
|
|
|
|
sdkp->WCE ? "enabled" : "disabled",
|
|
|
|
sdkp->RCD ? "disabled" : "enabled",
|
|
|
|
sdkp->DPOFUA ? "supports DPO and FUA"
|
|
|
|
: "doesn't support DPO or FUA");
|
2005-04-16 22:20:36 +00:00
|
|
|
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
|
|
|
bad_sense:
|
2005-08-28 16:33:52 +00:00
|
|
|
if (scsi_sense_valid(&sshdr) &&
|
2005-04-16 22:20:36 +00:00
|
|
|
sshdr.sense_key == ILLEGAL_REQUEST &&
|
|
|
|
sshdr.asc == 0x24 && sshdr.ascq == 0x0)
|
2007-02-28 03:40:55 +00:00
|
|
|
/* Invalid field in CDB */
|
2014-01-03 23:19:26 +00:00
|
|
|
sd_first_printk(KERN_NOTICE, sdkp, "Cache data unavailable\n");
|
2005-04-16 22:20:36 +00:00
|
|
|
else
|
2014-01-03 23:19:26 +00:00
|
|
|
sd_first_printk(KERN_ERR, sdkp,
|
|
|
|
"Asking for cache data failed\n");
|
2005-04-16 22:20:36 +00:00
|
|
|
|
|
|
|
defaults:
|
2012-07-08 03:05:08 +00:00
|
|
|
if (sdp->wce_default_on) {
|
2014-01-03 23:19:26 +00:00
|
|
|
sd_first_printk(KERN_NOTICE, sdkp,
|
|
|
|
"Assuming drive cache: write back\n");
|
2012-07-08 03:05:08 +00:00
|
|
|
sdkp->WCE = 1;
|
|
|
|
} else {
|
2014-01-03 23:19:26 +00:00
|
|
|
sd_first_printk(KERN_ERR, sdkp,
|
|
|
|
"Assuming drive cache: write through\n");
|
2012-07-08 03:05:08 +00:00
|
|
|
sdkp->WCE = 0;
|
|
|
|
}
|
2005-04-16 22:20:36 +00:00
|
|
|
sdkp->RCD = 0;
|
2006-02-26 14:34:10 +00:00
|
|
|
sdkp->DPOFUA = 0;
|
2005-04-16 22:20:36 +00:00
|
|
|
}
|
|
|
|
|
2008-07-17 08:28:34 +00:00
|
|
|
/*
|
|
|
|
* The ATO bit indicates whether the DIF application tag is available
|
|
|
|
* for use by the operating system.
|
|
|
|
*/
|
2010-08-11 01:01:20 +00:00
|
|
|
static void sd_read_app_tag_own(struct scsi_disk *sdkp, unsigned char *buffer)
|
2008-07-17 08:28:34 +00:00
|
|
|
{
|
|
|
|
int res, offset;
|
|
|
|
struct scsi_device *sdp = sdkp->device;
|
|
|
|
struct scsi_mode_data data;
|
|
|
|
struct scsi_sense_hdr sshdr;
|
|
|
|
|
|
|
|
if (sdp->type != TYPE_DISK)
|
|
|
|
return;
|
|
|
|
|
|
|
|
if (sdkp->protection_type == 0)
|
|
|
|
return;
|
|
|
|
|
|
|
|
res = scsi_mode_sense(sdp, 1, 0x0a, buffer, 36, SD_TIMEOUT,
|
|
|
|
SD_MAX_RETRIES, &data, &sshdr);
|
|
|
|
|
|
|
|
if (!scsi_status_is_good(res) || !data.header_length ||
|
|
|
|
data.length < 6) {
|
2014-01-03 23:19:26 +00:00
|
|
|
sd_first_printk(KERN_WARNING, sdkp,
|
2008-07-17 08:28:34 +00:00
|
|
|
"getting Control mode page failed, assume no ATO\n");
|
|
|
|
|
|
|
|
if (scsi_sense_valid(&sshdr))
|
|
|
|
sd_print_sense_hdr(sdkp, &sshdr);
|
|
|
|
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
|
|
|
offset = data.header_length + data.block_descriptor_length;
|
|
|
|
|
|
|
|
if ((buffer[offset] & 0x3f) != 0x0a) {
|
2014-01-03 23:19:26 +00:00
|
|
|
sd_first_printk(KERN_ERR, sdkp, "ATO Got wrong page\n");
|
2008-07-17 08:28:34 +00:00
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
|
|
|
if ((buffer[offset + 5] & 0x80) == 0)
|
|
|
|
return;
|
|
|
|
|
|
|
|
sdkp->ATO = 1;
|
|
|
|
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
2009-05-23 15:43:39 +00:00
|
|
|
/**
|
|
|
|
* sd_read_block_limits - Query disk device for preferred I/O sizes.
|
|
|
|
* @disk: disk to query
|
|
|
|
*/
|
|
|
|
static void sd_read_block_limits(struct scsi_disk *sdkp)
|
|
|
|
{
|
|
|
|
unsigned int sector_sz = sdkp->device->sector_size;
|
2010-03-02 13:44:34 +00:00
|
|
|
const int vpd_len = 64;
|
2014-06-03 22:45:51 +00:00
|
|
|
u32 max_xfer_length;
|
2009-11-03 18:33:07 +00:00
|
|
|
unsigned char *buffer = kmalloc(vpd_len, GFP_KERNEL);
|
2009-05-23 15:43:39 +00:00
|
|
|
|
2009-11-03 18:33:07 +00:00
|
|
|
if (!buffer ||
|
|
|
|
/* Block Limits VPD */
|
|
|
|
scsi_get_vpd_page(sdkp->device, 0xb0, buffer, vpd_len))
|
|
|
|
goto out;
|
2009-05-23 15:43:39 +00:00
|
|
|
|
2014-06-03 22:45:51 +00:00
|
|
|
max_xfer_length = get_unaligned_be32(&buffer[8]);
|
|
|
|
if (max_xfer_length)
|
|
|
|
sdkp->max_xfer_blocks = max_xfer_length;
|
|
|
|
|
2009-05-23 15:43:39 +00:00
|
|
|
blk_queue_io_min(sdkp->disk->queue,
|
|
|
|
get_unaligned_be16(&buffer[6]) * sector_sz);
|
|
|
|
blk_queue_io_opt(sdkp->disk->queue,
|
|
|
|
get_unaligned_be32(&buffer[12]) * sector_sz);
|
|
|
|
|
2011-03-08 07:07:15 +00:00
|
|
|
if (buffer[3] == 0x3c) {
|
|
|
|
unsigned int lba_count, desc_count;
|
2009-11-26 17:00:40 +00:00
|
|
|
|
2012-09-18 16:19:32 +00:00
|
|
|
sdkp->max_ws_blocks = (u32)get_unaligned_be64(&buffer[36]);
|
2009-11-26 17:00:40 +00:00
|
|
|
|
2011-03-08 07:07:15 +00:00
|
|
|
if (!sdkp->lbpme)
|
2010-09-10 05:22:07 +00:00
|
|
|
goto out;
|
|
|
|
|
2011-03-08 07:07:15 +00:00
|
|
|
lba_count = get_unaligned_be32(&buffer[20]);
|
|
|
|
desc_count = get_unaligned_be32(&buffer[24]);
|
2010-09-10 05:22:07 +00:00
|
|
|
|
2011-03-08 07:07:15 +00:00
|
|
|
if (lba_count && desc_count)
|
|
|
|
sdkp->max_unmap_blocks = lba_count;
|
2009-11-26 17:00:40 +00:00
|
|
|
|
2011-03-08 07:07:15 +00:00
|
|
|
sdkp->unmap_granularity = get_unaligned_be32(&buffer[28]);
|
2009-11-26 17:00:40 +00:00
|
|
|
|
|
|
|
if (buffer[32] & 0x80)
|
2011-03-08 07:07:15 +00:00
|
|
|
sdkp->unmap_alignment =
|
2009-11-26 17:00:40 +00:00
|
|
|
get_unaligned_be32(&buffer[32]) & ~(1 << 31);
|
2011-03-08 07:07:15 +00:00
|
|
|
|
|
|
|
if (!sdkp->lbpvpd) { /* LBP VPD page not provided */
|
|
|
|
|
|
|
|
if (sdkp->max_unmap_blocks)
|
|
|
|
sd_config_discard(sdkp, SD_LBP_UNMAP);
|
|
|
|
else
|
|
|
|
sd_config_discard(sdkp, SD_LBP_WS16);
|
|
|
|
|
|
|
|
} else { /* LBP VPD page tells us what to use */
|
2014-12-05 13:58:03 +00:00
|
|
|
if (sdkp->lbpu && sdkp->max_unmap_blocks && !sdkp->lbprz)
|
|
|
|
sd_config_discard(sdkp, SD_LBP_UNMAP);
|
|
|
|
else if (sdkp->lbpws)
|
2011-03-08 07:07:15 +00:00
|
|
|
sd_config_discard(sdkp, SD_LBP_WS16);
|
|
|
|
else if (sdkp->lbpws10)
|
|
|
|
sd_config_discard(sdkp, SD_LBP_WS10);
|
2014-11-07 05:08:13 +00:00
|
|
|
else if (sdkp->lbpu && sdkp->max_unmap_blocks)
|
|
|
|
sd_config_discard(sdkp, SD_LBP_UNMAP);
|
2011-03-08 07:07:15 +00:00
|
|
|
else
|
|
|
|
sd_config_discard(sdkp, SD_LBP_DISABLE);
|
|
|
|
}
|
2009-11-26 17:00:40 +00:00
|
|
|
}
|
|
|
|
|
2009-11-03 18:33:07 +00:00
|
|
|
out:
|
2009-05-23 15:43:39 +00:00
|
|
|
kfree(buffer);
|
|
|
|
}
|
|
|
|
|
2009-05-23 15:43:38 +00:00
|
|
|
/**
|
|
|
|
* sd_read_block_characteristics - Query block dev. characteristics
|
|
|
|
* @disk: disk to query
|
|
|
|
*/
|
|
|
|
static void sd_read_block_characteristics(struct scsi_disk *sdkp)
|
|
|
|
{
|
2009-11-03 18:33:07 +00:00
|
|
|
unsigned char *buffer;
|
2009-05-23 15:43:38 +00:00
|
|
|
u16 rot;
|
2010-03-02 13:44:34 +00:00
|
|
|
const int vpd_len = 64;
|
2009-05-23 15:43:38 +00:00
|
|
|
|
2009-11-03 18:33:07 +00:00
|
|
|
buffer = kmalloc(vpd_len, GFP_KERNEL);
|
2009-05-23 15:43:38 +00:00
|
|
|
|
2009-11-03 18:33:07 +00:00
|
|
|
if (!buffer ||
|
|
|
|
/* Block Device Characteristics VPD */
|
|
|
|
scsi_get_vpd_page(sdkp->device, 0xb1, buffer, vpd_len))
|
|
|
|
goto out;
|
2009-05-23 15:43:38 +00:00
|
|
|
|
|
|
|
rot = get_unaligned_be16(&buffer[4]);
|
|
|
|
|
2014-10-04 16:55:32 +00:00
|
|
|
if (rot == 1) {
|
2009-05-23 15:43:38 +00:00
|
|
|
queue_flag_set_unlocked(QUEUE_FLAG_NONROT, sdkp->disk->queue);
|
2014-10-04 16:55:32 +00:00
|
|
|
queue_flag_clear_unlocked(QUEUE_FLAG_ADD_RANDOM, sdkp->disk->queue);
|
|
|
|
}
|
2009-05-23 15:43:38 +00:00
|
|
|
|
2009-11-03 18:33:07 +00:00
|
|
|
out:
|
2009-05-23 15:43:38 +00:00
|
|
|
kfree(buffer);
|
|
|
|
}
|
|
|
|
|
2010-09-10 05:22:07 +00:00
|
|
|
/**
|
2011-03-08 07:07:15 +00:00
|
|
|
* sd_read_block_provisioning - Query provisioning VPD page
|
2010-09-10 05:22:07 +00:00
|
|
|
* @disk: disk to query
|
|
|
|
*/
|
2011-03-08 07:07:15 +00:00
|
|
|
static void sd_read_block_provisioning(struct scsi_disk *sdkp)
|
2010-09-10 05:22:07 +00:00
|
|
|
{
|
|
|
|
unsigned char *buffer;
|
|
|
|
const int vpd_len = 8;
|
|
|
|
|
2011-03-08 07:07:15 +00:00
|
|
|
if (sdkp->lbpme == 0)
|
2010-09-10 05:22:07 +00:00
|
|
|
return;
|
|
|
|
|
|
|
|
buffer = kmalloc(vpd_len, GFP_KERNEL);
|
|
|
|
|
|
|
|
if (!buffer || scsi_get_vpd_page(sdkp->device, 0xb2, buffer, vpd_len))
|
|
|
|
goto out;
|
|
|
|
|
2011-03-08 07:07:15 +00:00
|
|
|
sdkp->lbpvpd = 1;
|
|
|
|
sdkp->lbpu = (buffer[5] >> 7) & 1; /* UNMAP */
|
|
|
|
sdkp->lbpws = (buffer[5] >> 6) & 1; /* WRITE SAME(16) with UNMAP */
|
|
|
|
sdkp->lbpws10 = (buffer[5] >> 5) & 1; /* WRITE SAME(10) with UNMAP */
|
2010-09-10 05:22:07 +00:00
|
|
|
|
|
|
|
out:
|
|
|
|
kfree(buffer);
|
|
|
|
}
|
|
|
|
|
2012-09-18 16:19:32 +00:00
|
|
|
static void sd_read_write_same(struct scsi_disk *sdkp, unsigned char *buffer)
|
|
|
|
{
|
2013-06-07 02:15:55 +00:00
|
|
|
struct scsi_device *sdev = sdkp->device;
|
|
|
|
|
2013-10-23 10:25:40 +00:00
|
|
|
if (sdev->host->no_write_same) {
|
|
|
|
sdev->no_write_same = 1;
|
|
|
|
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
2013-06-07 02:15:55 +00:00
|
|
|
if (scsi_report_opcode(sdev, buffer, SD_BUF_SIZE, INQUIRY) < 0) {
|
2013-09-23 12:47:32 +00:00
|
|
|
/* too large values might cause issues with arcmsr */
|
|
|
|
int vpd_buf_len = 64;
|
|
|
|
|
2013-06-07 02:15:55 +00:00
|
|
|
sdev->no_report_opcodes = 1;
|
|
|
|
|
|
|
|
/* Disable WRITE SAME if REPORT SUPPORTED OPERATION
|
|
|
|
* CODES is unsupported and the device has an ATA
|
|
|
|
* Information VPD page (SAT).
|
|
|
|
*/
|
2013-09-23 12:47:32 +00:00
|
|
|
if (!scsi_get_vpd_page(sdev, 0x89, buffer, vpd_buf_len))
|
2013-06-07 02:15:55 +00:00
|
|
|
sdev->no_write_same = 1;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (scsi_report_opcode(sdev, buffer, SD_BUF_SIZE, WRITE_SAME_16) == 1)
|
2012-09-18 16:19:32 +00:00
|
|
|
sdkp->ws16 = 1;
|
2013-06-07 02:15:55 +00:00
|
|
|
|
|
|
|
if (scsi_report_opcode(sdev, buffer, SD_BUF_SIZE, WRITE_SAME) == 1)
|
|
|
|
sdkp->ws10 = 1;
|
2012-09-18 16:19:32 +00:00
|
|
|
}
|
|
|
|
|
2009-07-29 18:06:53 +00:00
|
|
|
static int sd_try_extended_inquiry(struct scsi_device *sdp)
|
|
|
|
{
|
2014-07-15 16:49:17 +00:00
|
|
|
/* Attempt VPD inquiry if the device blacklist explicitly calls
|
|
|
|
* for it.
|
|
|
|
*/
|
|
|
|
if (sdp->try_vpd_pages)
|
|
|
|
return 1;
|
2009-07-29 18:06:53 +00:00
|
|
|
/*
|
|
|
|
* Although VPD inquiries can go to SCSI-2 type devices,
|
|
|
|
* some USB ones crash on receiving them, and the pages
|
|
|
|
* we currently ask for are for SPC-3 and beyond
|
|
|
|
*/
|
2012-01-10 18:43:30 +00:00
|
|
|
if (sdp->scsi_level > SCSI_SPC_2 && !sdp->skip_vpd_pages)
|
2009-07-29 18:06:53 +00:00
|
|
|
return 1;
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2005-04-16 22:20:36 +00:00
|
|
|
/**
|
|
|
|
* sd_revalidate_disk - called the first time a new disk is seen,
|
|
|
|
* performs disk spin up, read_capacity, etc.
|
|
|
|
* @disk: struct gendisk we care about
|
|
|
|
**/
|
|
|
|
static int sd_revalidate_disk(struct gendisk *disk)
|
|
|
|
{
|
|
|
|
struct scsi_disk *sdkp = scsi_disk(disk);
|
|
|
|
struct scsi_device *sdp = sdkp->device;
|
|
|
|
unsigned char *buffer;
|
2014-06-03 22:45:51 +00:00
|
|
|
unsigned int max_xfer;
|
2005-04-16 22:20:36 +00:00
|
|
|
|
2007-02-28 03:41:19 +00:00
|
|
|
SCSI_LOG_HLQUEUE(3, sd_printk(KERN_INFO, sdkp,
|
|
|
|
"sd_revalidate_disk\n"));
|
2005-04-16 22:20:36 +00:00
|
|
|
|
|
|
|
/*
|
|
|
|
* If the device is offline, don't try and read capacity or any
|
|
|
|
* of the other niceties.
|
|
|
|
*/
|
|
|
|
if (!scsi_device_online(sdp))
|
|
|
|
goto out;
|
|
|
|
|
2007-05-21 15:15:26 +00:00
|
|
|
buffer = kmalloc(SD_BUF_SIZE, GFP_KERNEL);
|
2005-04-16 22:20:36 +00:00
|
|
|
if (!buffer) {
|
2007-02-28 03:40:55 +00:00
|
|
|
sd_printk(KERN_WARNING, sdkp, "sd_revalidate_disk: Memory "
|
|
|
|
"allocation failure.\n");
|
2005-08-28 16:33:52 +00:00
|
|
|
goto out;
|
2005-04-16 22:20:36 +00:00
|
|
|
}
|
|
|
|
|
2007-02-28 03:40:55 +00:00
|
|
|
sd_spinup_disk(sdkp);
|
2005-04-16 22:20:36 +00:00
|
|
|
|
|
|
|
/*
|
|
|
|
* Without media there is no reason to ask; moreover, some devices
|
|
|
|
* react badly if we do.
|
|
|
|
*/
|
|
|
|
if (sdkp->media_present) {
|
2007-02-28 03:40:55 +00:00
|
|
|
sd_read_capacity(sdkp, buffer);
|
2009-07-29 18:06:53 +00:00
|
|
|
|
|
|
|
if (sd_try_extended_inquiry(sdp)) {
|
2011-03-08 07:07:15 +00:00
|
|
|
sd_read_block_provisioning(sdkp);
|
2009-07-29 18:06:53 +00:00
|
|
|
sd_read_block_limits(sdkp);
|
|
|
|
sd_read_block_characteristics(sdkp);
|
|
|
|
}
|
|
|
|
|
2007-02-28 03:40:55 +00:00
|
|
|
sd_read_write_protect_flag(sdkp, buffer);
|
|
|
|
sd_read_cache_type(sdkp, buffer);
|
2008-07-17 08:28:34 +00:00
|
|
|
sd_read_app_tag_own(sdkp, buffer);
|
2012-09-18 16:19:32 +00:00
|
|
|
sd_read_write_same(sdkp, buffer);
|
2005-04-16 22:20:36 +00:00
|
|
|
}
|
2006-01-06 08:52:55 +00:00
|
|
|
|
2009-03-09 15:33:31 +00:00
|
|
|
sdkp->first_scan = 0;
|
|
|
|
|
2006-01-06 08:52:55 +00:00
|
|
|
/*
|
|
|
|
* We now have all cache related info, determine how we deal
|
2010-09-03 09:56:16 +00:00
|
|
|
* with flush requests.
|
2006-01-06 08:52:55 +00:00
|
|
|
*/
|
2014-06-03 09:37:30 +00:00
|
|
|
sd_set_flush_flag(sdkp);
|
2006-01-06 08:52:55 +00:00
|
|
|
|
2015-01-29 21:54:40 +00:00
|
|
|
max_xfer = sdkp->max_xfer_blocks;
|
2014-06-03 22:45:51 +00:00
|
|
|
max_xfer <<= ilog2(sdp->sector_size) - 9;
|
2015-01-29 21:54:40 +00:00
|
|
|
|
2015-06-23 16:13:59 +00:00
|
|
|
sdkp->disk->queue->limits.max_sectors =
|
|
|
|
min_not_zero(queue_max_hw_sectors(sdkp->disk->queue), max_xfer);
|
|
|
|
|
2005-04-16 22:20:36 +00:00
|
|
|
set_capacity(disk, sdkp->capacity);
|
2012-09-18 16:19:32 +00:00
|
|
|
sd_config_write_same(sdkp);
|
2005-04-16 22:20:36 +00:00
|
|
|
kfree(buffer);
|
|
|
|
|
|
|
|
out:
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2010-05-15 18:09:32 +00:00
|
|
|
/**
|
|
|
|
* sd_unlock_native_capacity - unlock native capacity
|
|
|
|
* @disk: struct gendisk to set capacity for
|
|
|
|
*
|
|
|
|
* Block layer calls this function if it detects that partitions
|
|
|
|
* on @disk reach beyond the end of the device. If the SCSI host
|
|
|
|
* implements ->unlock_native_capacity() method, it's invoked to
|
|
|
|
* give it a chance to adjust the device capacity.
|
|
|
|
*
|
|
|
|
* CONTEXT:
|
|
|
|
* Defined by block layer. Might sleep.
|
|
|
|
*/
|
|
|
|
static void sd_unlock_native_capacity(struct gendisk *disk)
|
|
|
|
{
|
|
|
|
struct scsi_device *sdev = scsi_disk(disk)->device;
|
|
|
|
|
|
|
|
if (sdev->host->hostt->unlock_native_capacity)
|
|
|
|
sdev->host->hostt->unlock_native_capacity(sdev);
|
|
|
|
}
|
|
|
|
|
2008-08-25 10:56:17 +00:00
|
|
|
/**
|
|
|
|
* sd_format_disk_name - format disk name
|
|
|
|
* @prefix: name prefix - ie. "sd" for SCSI disks
|
|
|
|
* @index: index of the disk to format name for
|
|
|
|
* @buf: output buffer
|
|
|
|
* @buflen: length of the output buffer
|
|
|
|
*
|
|
|
|
* SCSI disk names starts at sda. The 26th device is sdz and the
|
|
|
|
* 27th is sdaa. The last one for two lettered suffix is sdzz
|
|
|
|
* which is followed by sdaaa.
|
|
|
|
*
|
|
|
|
* This is basically 26 base counting with one extra 'nil' entry
|
tree-wide: Assorted spelling fixes
In particular, several occurances of funny versions of 'success',
'unknown', 'therefore', 'acknowledge', 'argument', 'achieve', 'address',
'beginning', 'desirable', 'separate' and 'necessary' are fixed.
Signed-off-by: Daniel Mack <daniel@caiaq.de>
Cc: Joe Perches <joe@perches.com>
Cc: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-02-03 00:01:28 +00:00
|
|
|
* at the beginning from the second digit on and can be
|
2008-08-25 10:56:17 +00:00
|
|
|
* determined using similar method as 26 base conversion with the
|
|
|
|
* index shifted -1 after each digit is computed.
|
|
|
|
*
|
|
|
|
* CONTEXT:
|
|
|
|
* Don't care.
|
|
|
|
*
|
|
|
|
* RETURNS:
|
|
|
|
* 0 on success, -errno on failure.
|
|
|
|
*/
|
|
|
|
static int sd_format_disk_name(char *prefix, int index, char *buf, int buflen)
|
|
|
|
{
|
|
|
|
const int base = 'z' - 'a' + 1;
|
|
|
|
char *begin = buf + strlen(prefix);
|
|
|
|
char *end = buf + buflen;
|
|
|
|
char *p;
|
|
|
|
int unit;
|
|
|
|
|
|
|
|
p = end - 1;
|
|
|
|
*p = '\0';
|
|
|
|
unit = base;
|
|
|
|
do {
|
|
|
|
if (p == begin)
|
|
|
|
return -EINVAL;
|
|
|
|
*--p = 'a' + (index % unit);
|
|
|
|
index = (index / unit) - 1;
|
|
|
|
} while (index >= 0);
|
|
|
|
|
|
|
|
memmove(begin, p, end - p);
|
|
|
|
memcpy(buf, prefix, strlen(prefix));
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2009-01-04 13:32:28 +00:00
|
|
|
/*
|
|
|
|
* The asynchronous part of sd_probe
|
|
|
|
*/
|
|
|
|
static void sd_probe_async(void *data, async_cookie_t cookie)
|
|
|
|
{
|
|
|
|
struct scsi_disk *sdkp = data;
|
|
|
|
struct scsi_device *sdp;
|
|
|
|
struct gendisk *gd;
|
|
|
|
u32 index;
|
|
|
|
struct device *dev;
|
|
|
|
|
|
|
|
sdp = sdkp->device;
|
|
|
|
gd = sdkp->disk;
|
|
|
|
index = sdkp->index;
|
|
|
|
dev = &sdp->sdev_gendev;
|
|
|
|
|
2010-09-20 16:20:22 +00:00
|
|
|
gd->major = sd_major((index & 0xf0) >> 4);
|
|
|
|
gd->first_minor = ((index & 0xf) << 4) | (index & 0xfff00);
|
|
|
|
gd->minors = SD_MINORS;
|
|
|
|
|
2009-01-04 13:32:28 +00:00
|
|
|
gd->fops = &sd_fops;
|
|
|
|
gd->private_data = &sdkp->driver;
|
|
|
|
gd->queue = sdkp->device->request_queue;
|
|
|
|
|
2009-03-09 15:33:31 +00:00
|
|
|
/* defaults, until the device tells us otherwise */
|
|
|
|
sdp->sector_size = 512;
|
|
|
|
sdkp->capacity = 0;
|
|
|
|
sdkp->media_present = 1;
|
|
|
|
sdkp->write_prot = 0;
|
2013-04-24 21:02:53 +00:00
|
|
|
sdkp->cache_override = 0;
|
2009-03-09 15:33:31 +00:00
|
|
|
sdkp->WCE = 0;
|
|
|
|
sdkp->RCD = 0;
|
|
|
|
sdkp->ATO = 0;
|
|
|
|
sdkp->first_scan = 1;
|
2012-02-09 18:48:53 +00:00
|
|
|
sdkp->max_medium_access_timeouts = SD_MAX_MEDIUM_TIMEOUTS;
|
2009-03-09 15:33:31 +00:00
|
|
|
|
2009-01-04 13:32:28 +00:00
|
|
|
sd_revalidate_disk(gd);
|
|
|
|
|
|
|
|
gd->driverfs_dev = &sdp->sdev_gendev;
|
2010-03-16 07:55:32 +00:00
|
|
|
gd->flags = GENHD_FL_EXT_DEVT;
|
2010-12-18 17:42:23 +00:00
|
|
|
if (sdp->removable) {
|
2009-01-04 13:32:28 +00:00
|
|
|
gd->flags |= GENHD_FL_REMOVABLE;
|
2010-12-18 17:42:23 +00:00
|
|
|
gd->events |= DISK_EVENT_MEDIA_CHANGE;
|
|
|
|
}
|
2009-01-04 13:32:28 +00:00
|
|
|
|
2013-10-10 05:22:36 +00:00
|
|
|
blk_pm_runtime_init(sdp->request_queue, dev);
|
2009-01-04 13:32:28 +00:00
|
|
|
add_disk(gd);
|
2012-09-21 16:44:12 +00:00
|
|
|
if (sdkp->capacity)
|
|
|
|
sd_dif_config_host(sdkp);
|
2009-01-04 13:32:28 +00:00
|
|
|
|
2009-05-23 15:43:38 +00:00
|
|
|
sd_revalidate_disk(gd);
|
|
|
|
|
2009-01-04 13:32:28 +00:00
|
|
|
sd_printk(KERN_NOTICE, sdkp, "Attached SCSI %sdisk\n",
|
|
|
|
sdp->removable ? "removable " : "");
|
2010-06-16 18:52:17 +00:00
|
|
|
scsi_autopm_put_device(sdp);
|
2009-08-21 15:47:54 +00:00
|
|
|
put_device(&sdkp->dev);
|
2009-01-04 13:32:28 +00:00
|
|
|
}
|
|
|
|
|
2005-04-16 22:20:36 +00:00
|
|
|
/**
|
|
|
|
* sd_probe - called during driver initialization and whenever a
|
|
|
|
* new scsi device is attached to the system. It is called once
|
|
|
|
* for each scsi device (not just disks) present.
|
|
|
|
* @dev: pointer to device object
|
|
|
|
*
|
|
|
|
* Returns 0 if successful (or not interested in this scsi device
|
|
|
|
* (e.g. scanner)); 1 when there is an error.
|
|
|
|
*
|
|
|
|
* Note: this function is invoked from the scsi mid-level.
|
|
|
|
* This function sets up the mapping between a given
|
|
|
|
* <host,channel,id,lun> (found in sdp) and new device name
|
|
|
|
* (e.g. /dev/sda). More precisely it is the block device major
|
|
|
|
* and minor number that is chosen here.
|
|
|
|
*
|
2012-02-24 15:56:54 +00:00
|
|
|
* Assume sd_probe is not re-entrant (for time being)
|
|
|
|
* Also think about sd_probe() and sd_remove() running coincidentally.
|
2005-04-16 22:20:36 +00:00
|
|
|
**/
|
|
|
|
static int sd_probe(struct device *dev)
|
|
|
|
{
|
|
|
|
struct scsi_device *sdp = to_scsi_device(dev);
|
|
|
|
struct scsi_disk *sdkp;
|
|
|
|
struct gendisk *gd;
|
2010-08-11 01:01:20 +00:00
|
|
|
int index;
|
2005-04-16 22:20:36 +00:00
|
|
|
int error;
|
|
|
|
|
2014-09-10 11:54:09 +00:00
|
|
|
scsi_autopm_get_device(sdp);
|
2005-04-16 22:20:36 +00:00
|
|
|
error = -ENODEV;
|
2005-05-16 00:59:55 +00:00
|
|
|
if (sdp->type != TYPE_DISK && sdp->type != TYPE_MOD && sdp->type != TYPE_RBC)
|
2005-04-16 22:20:36 +00:00
|
|
|
goto out;
|
|
|
|
|
2005-10-02 16:45:08 +00:00
|
|
|
SCSI_LOG_HLQUEUE(3, sdev_printk(KERN_INFO, sdp,
|
2012-02-24 15:56:54 +00:00
|
|
|
"sd_probe\n"));
|
2005-04-16 22:20:36 +00:00
|
|
|
|
|
|
|
error = -ENOMEM;
|
2006-01-16 15:31:18 +00:00
|
|
|
sdkp = kzalloc(sizeof(*sdkp), GFP_KERNEL);
|
2005-04-16 22:20:36 +00:00
|
|
|
if (!sdkp)
|
|
|
|
goto out;
|
|
|
|
|
2008-08-25 10:56:16 +00:00
|
|
|
gd = alloc_disk(SD_MINORS);
|
2005-04-16 22:20:36 +00:00
|
|
|
if (!gd)
|
|
|
|
goto out_free;
|
|
|
|
|
2008-07-14 05:59:30 +00:00
|
|
|
do {
|
|
|
|
if (!ida_pre_get(&sd_index_ida, GFP_KERNEL))
|
|
|
|
goto out_put;
|
2005-04-16 22:20:36 +00:00
|
|
|
|
2009-02-21 02:04:45 +00:00
|
|
|
spin_lock(&sd_index_lock);
|
2008-07-14 05:59:30 +00:00
|
|
|
error = ida_get_new(&sd_index_ida, &index);
|
2009-02-21 02:04:45 +00:00
|
|
|
spin_unlock(&sd_index_lock);
|
2008-07-14 05:59:30 +00:00
|
|
|
} while (error == -EAGAIN);
|
2005-04-16 22:20:36 +00:00
|
|
|
|
2011-10-19 16:49:04 +00:00
|
|
|
if (error) {
|
|
|
|
sdev_printk(KERN_WARNING, sdp, "sd_probe: memory exhausted.\n");
|
2005-04-16 22:20:36 +00:00
|
|
|
goto out_put;
|
2010-09-20 16:20:22 +00:00
|
|
|
}
|
|
|
|
|
2008-08-25 10:56:17 +00:00
|
|
|
error = sd_format_disk_name("sd", index, gd->disk_name, DISK_NAME_LEN);
|
2011-10-19 16:49:04 +00:00
|
|
|
if (error) {
|
|
|
|
sdev_printk(KERN_WARNING, sdp, "SCSI disk (sd) name length exceeded.\n");
|
2008-07-14 05:59:30 +00:00
|
|
|
goto out_free_index;
|
2011-10-19 16:49:04 +00:00
|
|
|
}
|
2008-07-14 05:59:30 +00:00
|
|
|
|
2005-04-16 22:20:36 +00:00
|
|
|
sdkp->device = sdp;
|
|
|
|
sdkp->driver = &sd_template;
|
|
|
|
sdkp->disk = gd;
|
|
|
|
sdkp->index = index;
|
2010-07-07 14:51:29 +00:00
|
|
|
atomic_set(&sdkp->openers, 0);
|
2012-06-09 14:03:39 +00:00
|
|
|
atomic_set(&sdkp->device->ioerr_cnt, 0);
|
2005-04-16 22:20:36 +00:00
|
|
|
|
2009-05-26 20:35:48 +00:00
|
|
|
if (!sdp->request_queue->rq_timeout) {
|
|
|
|
if (sdp->type != TYPE_MOD)
|
|
|
|
blk_queue_rq_timeout(sdp->request_queue, SD_TIMEOUT);
|
|
|
|
else
|
|
|
|
blk_queue_rq_timeout(sdp->request_queue,
|
|
|
|
SD_MOD_TIMEOUT);
|
|
|
|
}
|
|
|
|
|
|
|
|
device_initialize(&sdkp->dev);
|
2010-06-16 18:52:17 +00:00
|
|
|
sdkp->dev.parent = dev;
|
2009-05-26 20:35:48 +00:00
|
|
|
sdkp->dev.class = &sd_disk_class;
|
2013-07-03 22:04:56 +00:00
|
|
|
dev_set_name(&sdkp->dev, "%s", dev_name(dev));
|
2009-05-26 20:35:48 +00:00
|
|
|
|
2015-01-19 14:41:12 +00:00
|
|
|
error = device_add(&sdkp->dev);
|
|
|
|
if (error)
|
2009-05-26 20:35:48 +00:00
|
|
|
goto out_free_index;
|
|
|
|
|
2010-06-16 18:52:17 +00:00
|
|
|
get_device(dev);
|
|
|
|
dev_set_drvdata(dev, sdkp);
|
2009-05-26 20:35:48 +00:00
|
|
|
|
2009-08-21 15:47:54 +00:00
|
|
|
get_device(&sdkp->dev); /* prevent release before async_schedule */
|
2012-03-23 00:05:11 +00:00
|
|
|
async_schedule_domain(sd_probe_async, sdkp, &scsi_sd_probe_domain);
|
2005-04-16 22:20:36 +00:00
|
|
|
|
|
|
|
return 0;
|
|
|
|
|
2008-07-14 05:59:30 +00:00
|
|
|
out_free_index:
|
2009-02-21 02:04:45 +00:00
|
|
|
spin_lock(&sd_index_lock);
|
2008-07-14 05:59:30 +00:00
|
|
|
ida_remove(&sd_index_ida, index);
|
2009-02-21 02:04:45 +00:00
|
|
|
spin_unlock(&sd_index_lock);
|
2006-03-18 20:14:21 +00:00
|
|
|
out_put:
|
2005-04-16 22:20:36 +00:00
|
|
|
put_disk(gd);
|
2006-03-18 20:14:21 +00:00
|
|
|
out_free:
|
2005-04-16 22:20:36 +00:00
|
|
|
kfree(sdkp);
|
2006-03-18 20:14:21 +00:00
|
|
|
out:
|
2014-09-10 11:54:09 +00:00
|
|
|
scsi_autopm_put_device(sdp);
|
2005-04-16 22:20:36 +00:00
|
|
|
return error;
|
|
|
|
}
|
|
|
|
|
|
|
|
/**
|
|
|
|
* sd_remove - called whenever a scsi disk (previously recognized by
|
|
|
|
* sd_probe) is detached from the system. It is called (potentially
|
|
|
|
* multiple times) during sd module unload.
|
|
|
|
* @sdp: pointer to mid level scsi device object
|
|
|
|
*
|
|
|
|
* Note: this function is invoked from the scsi mid-level.
|
|
|
|
* This function potentially frees up a device name (e.g. /dev/sdc)
|
|
|
|
* that could be re-used by a subsequent sd_probe().
|
|
|
|
* This function is not called when the built-in sd driver is "exit-ed".
|
|
|
|
**/
|
|
|
|
static int sd_remove(struct device *dev)
|
|
|
|
{
|
2009-05-26 20:35:48 +00:00
|
|
|
struct scsi_disk *sdkp;
|
2013-05-10 09:06:16 +00:00
|
|
|
dev_t devt;
|
2005-04-16 22:20:36 +00:00
|
|
|
|
2009-05-26 20:35:48 +00:00
|
|
|
sdkp = dev_get_drvdata(dev);
|
2013-05-10 09:06:16 +00:00
|
|
|
devt = disk_devt(sdkp->disk);
|
2010-06-16 18:52:17 +00:00
|
|
|
scsi_autopm_get_device(sdkp->device);
|
|
|
|
|
2014-04-10 22:30:35 +00:00
|
|
|
async_synchronize_full_domain(&scsi_sd_pm_domain);
|
2012-03-23 00:05:11 +00:00
|
|
|
async_synchronize_full_domain(&scsi_sd_probe_domain);
|
2008-02-21 23:13:36 +00:00
|
|
|
device_del(&sdkp->dev);
|
2005-04-16 22:20:36 +00:00
|
|
|
del_gendisk(sdkp->disk);
|
|
|
|
sd_shutdown(dev);
|
2005-11-04 19:44:41 +00:00
|
|
|
|
2013-05-10 09:06:16 +00:00
|
|
|
blk_register_region(devt, SD_MINORS, NULL,
|
|
|
|
sd_default_probe, NULL, NULL);
|
|
|
|
|
2006-01-11 12:16:10 +00:00
|
|
|
mutex_lock(&sd_ref_mutex);
|
2005-11-04 19:44:41 +00:00
|
|
|
dev_set_drvdata(dev, NULL);
|
2008-02-21 23:13:36 +00:00
|
|
|
put_device(&sdkp->dev);
|
2006-01-11 12:16:10 +00:00
|
|
|
mutex_unlock(&sd_ref_mutex);
|
2005-04-16 22:20:36 +00:00
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
/**
|
|
|
|
* scsi_disk_release - Called to free the scsi_disk structure
|
2008-02-21 23:13:36 +00:00
|
|
|
* @dev: pointer to embedded class device
|
2005-04-16 22:20:36 +00:00
|
|
|
*
|
2006-01-11 12:16:10 +00:00
|
|
|
* sd_ref_mutex must be held entering this routine. Because it is
|
2005-04-16 22:20:36 +00:00
|
|
|
* called on last put, you should always use the scsi_disk_get()
|
|
|
|
* scsi_disk_put() helpers which manipulate the semaphore directly
|
2008-02-21 23:13:36 +00:00
|
|
|
* and never do a direct put_device.
|
2005-04-16 22:20:36 +00:00
|
|
|
**/
|
2008-02-21 23:13:36 +00:00
|
|
|
static void scsi_disk_release(struct device *dev)
|
2005-04-16 22:20:36 +00:00
|
|
|
{
|
2008-02-21 23:13:36 +00:00
|
|
|
struct scsi_disk *sdkp = to_scsi_disk(dev);
|
2005-04-16 22:20:36 +00:00
|
|
|
struct gendisk *disk = sdkp->disk;
|
|
|
|
|
2009-02-21 02:04:45 +00:00
|
|
|
spin_lock(&sd_index_lock);
|
2008-07-14 05:59:30 +00:00
|
|
|
ida_remove(&sd_index_ida, sdkp->index);
|
2009-02-21 02:04:45 +00:00
|
|
|
spin_unlock(&sd_index_lock);
|
2005-04-16 22:20:36 +00:00
|
|
|
|
|
|
|
disk->private_data = NULL;
|
|
|
|
put_disk(disk);
|
2005-11-04 19:44:41 +00:00
|
|
|
put_device(&sdkp->device->sdev_gendev);
|
2005-04-16 22:20:36 +00:00
|
|
|
|
|
|
|
kfree(sdkp);
|
|
|
|
}
|
|
|
|
|
2007-03-20 17:26:03 +00:00
|
|
|
static int sd_start_stop_device(struct scsi_disk *sdkp, int start)
|
2007-03-20 15:13:59 +00:00
|
|
|
{
|
|
|
|
unsigned char cmd[6] = { START_STOP }; /* START_VALID */
|
|
|
|
struct scsi_sense_hdr sshdr;
|
2007-03-20 17:26:03 +00:00
|
|
|
struct scsi_device *sdp = sdkp->device;
|
2007-03-20 15:13:59 +00:00
|
|
|
int res;
|
|
|
|
|
|
|
|
if (start)
|
|
|
|
cmd[4] |= 1; /* START */
|
|
|
|
|
2008-05-10 22:34:07 +00:00
|
|
|
if (sdp->start_stop_pwr_cond)
|
|
|
|
cmd[4] |= start ? 1 << 4 : 3 << 4; /* Active or Standby */
|
|
|
|
|
2007-03-20 15:13:59 +00:00
|
|
|
if (!scsi_device_online(sdp))
|
|
|
|
return -ENODEV;
|
|
|
|
|
2013-03-23 03:42:25 +00:00
|
|
|
res = scsi_execute_req_flags(sdp, cmd, DMA_NONE, NULL, 0, &sshdr,
|
|
|
|
SD_TIMEOUT, SD_MAX_RETRIES, NULL, REQ_PM);
|
2007-03-20 15:13:59 +00:00
|
|
|
if (res) {
|
2014-10-24 12:27:00 +00:00
|
|
|
sd_print_result(sdkp, "Start/Stop Unit failed", res);
|
2007-03-20 15:13:59 +00:00
|
|
|
if (driver_byte(res) & DRIVER_SENSE)
|
2007-03-20 17:26:03 +00:00
|
|
|
sd_print_sense_hdr(sdkp, &sshdr);
|
2013-09-16 11:28:15 +00:00
|
|
|
if (scsi_sense_valid(&sshdr) &&
|
|
|
|
/* 0x3a is medium not present */
|
|
|
|
sshdr.asc == 0x3a)
|
|
|
|
res = 0;
|
2007-03-20 15:13:59 +00:00
|
|
|
}
|
|
|
|
|
2013-09-16 11:28:15 +00:00
|
|
|
/* SCSI error codes must not go to the generic layer */
|
|
|
|
if (res)
|
|
|
|
return -EIO;
|
|
|
|
|
|
|
|
return 0;
|
2007-03-20 15:13:59 +00:00
|
|
|
}
|
|
|
|
|
2005-04-16 22:20:36 +00:00
|
|
|
/*
|
|
|
|
* Send a SYNCHRONIZE CACHE instruction down to the device through
|
|
|
|
* the normal SCSI command structure. Wait for the command to
|
|
|
|
* complete.
|
|
|
|
*/
|
|
|
|
static void sd_shutdown(struct device *dev)
|
|
|
|
{
|
2015-02-02 13:01:25 +00:00
|
|
|
struct scsi_disk *sdkp = dev_get_drvdata(dev);
|
2005-04-16 22:20:36 +00:00
|
|
|
|
|
|
|
if (!sdkp)
|
|
|
|
return; /* this can happen */
|
|
|
|
|
2011-12-05 01:20:26 +00:00
|
|
|
if (pm_runtime_suspended(dev))
|
2015-02-02 13:01:25 +00:00
|
|
|
return;
|
2011-12-05 01:20:26 +00:00
|
|
|
|
2013-09-16 11:28:15 +00:00
|
|
|
if (sdkp->WCE && sdkp->media_present) {
|
2007-02-28 03:40:55 +00:00
|
|
|
sd_printk(KERN_NOTICE, sdkp, "Synchronizing SCSI cache\n");
|
|
|
|
sd_sync_cache(sdkp);
|
2005-11-04 19:44:41 +00:00
|
|
|
}
|
2007-03-20 15:13:59 +00:00
|
|
|
|
2007-03-20 17:26:03 +00:00
|
|
|
if (system_state != SYSTEM_RESTART && sdkp->device->manage_start_stop) {
|
|
|
|
sd_printk(KERN_NOTICE, sdkp, "Stopping disk\n");
|
|
|
|
sd_start_stop_device(sdkp, 0);
|
2007-03-20 15:13:59 +00:00
|
|
|
}
|
2005-11-04 19:44:41 +00:00
|
|
|
}
|
2005-04-16 22:20:36 +00:00
|
|
|
|
2013-09-16 11:28:15 +00:00
|
|
|
static int sd_suspend_common(struct device *dev, bool ignore_stop_errors)
|
2007-03-20 15:13:59 +00:00
|
|
|
{
|
2015-02-02 13:01:25 +00:00
|
|
|
struct scsi_disk *sdkp = dev_get_drvdata(dev);
|
2007-05-21 13:55:04 +00:00
|
|
|
int ret = 0;
|
2007-03-20 15:13:59 +00:00
|
|
|
|
|
|
|
if (!sdkp)
|
|
|
|
return 0; /* this can happen */
|
|
|
|
|
2013-09-16 11:28:15 +00:00
|
|
|
if (sdkp->WCE && sdkp->media_present) {
|
2007-03-20 17:26:03 +00:00
|
|
|
sd_printk(KERN_NOTICE, sdkp, "Synchronizing SCSI cache\n");
|
2007-03-20 15:13:59 +00:00
|
|
|
ret = sd_sync_cache(sdkp);
|
2013-09-16 11:28:15 +00:00
|
|
|
if (ret) {
|
|
|
|
/* ignore OFFLINE device */
|
|
|
|
if (ret == -ENODEV)
|
|
|
|
ret = 0;
|
2007-05-21 13:55:04 +00:00
|
|
|
goto done;
|
2013-09-16 11:28:15 +00:00
|
|
|
}
|
2007-03-20 15:13:59 +00:00
|
|
|
}
|
|
|
|
|
2012-11-09 07:27:55 +00:00
|
|
|
if (sdkp->device->manage_start_stop) {
|
2007-03-20 17:26:03 +00:00
|
|
|
sd_printk(KERN_NOTICE, sdkp, "Stopping disk\n");
|
2013-09-16 11:28:15 +00:00
|
|
|
/* an error is not worth aborting a system sleep */
|
2007-03-20 17:26:03 +00:00
|
|
|
ret = sd_start_stop_device(sdkp, 0);
|
2013-09-16 11:28:15 +00:00
|
|
|
if (ignore_stop_errors)
|
|
|
|
ret = 0;
|
2007-03-20 15:13:59 +00:00
|
|
|
}
|
|
|
|
|
2007-05-21 13:55:04 +00:00
|
|
|
done:
|
|
|
|
return ret;
|
2007-03-20 15:13:59 +00:00
|
|
|
}
|
|
|
|
|
2013-09-16 11:28:15 +00:00
|
|
|
static int sd_suspend_system(struct device *dev)
|
|
|
|
{
|
|
|
|
return sd_suspend_common(dev, true);
|
|
|
|
}
|
|
|
|
|
|
|
|
static int sd_suspend_runtime(struct device *dev)
|
|
|
|
{
|
|
|
|
return sd_suspend_common(dev, false);
|
|
|
|
}
|
|
|
|
|
2007-03-20 15:13:59 +00:00
|
|
|
static int sd_resume(struct device *dev)
|
|
|
|
{
|
2015-02-02 13:01:25 +00:00
|
|
|
struct scsi_disk *sdkp = dev_get_drvdata(dev);
|
2007-03-20 15:13:59 +00:00
|
|
|
|
2007-03-20 17:26:03 +00:00
|
|
|
if (!sdkp->device->manage_start_stop)
|
2015-02-02 13:01:25 +00:00
|
|
|
return 0;
|
2007-03-20 15:13:59 +00:00
|
|
|
|
2007-03-20 17:26:03 +00:00
|
|
|
sd_printk(KERN_NOTICE, sdkp, "Starting disk\n");
|
2015-02-02 13:01:25 +00:00
|
|
|
return sd_start_stop_device(sdkp, 1);
|
2007-03-20 15:13:59 +00:00
|
|
|
}
|
|
|
|
|
2005-04-16 22:20:36 +00:00
|
|
|
/**
|
|
|
|
* init_sd - entry point for this driver (both when built in or when
|
|
|
|
* a module).
|
|
|
|
*
|
|
|
|
* Note: this function registers this driver with the scsi mid-level.
|
|
|
|
**/
|
|
|
|
static int __init init_sd(void)
|
|
|
|
{
|
2006-10-04 09:32:54 +00:00
|
|
|
int majors = 0, i, err;
|
2005-04-16 22:20:36 +00:00
|
|
|
|
|
|
|
SCSI_LOG_HLQUEUE(3, printk("init_sd: sd driver entry point\n"));
|
|
|
|
|
2013-05-10 09:06:16 +00:00
|
|
|
for (i = 0; i < SD_MAJORS; i++) {
|
|
|
|
if (register_blkdev(sd_major(i), "sd") != 0)
|
|
|
|
continue;
|
|
|
|
majors++;
|
|
|
|
blk_register_region(sd_major(i), SD_MINORS, NULL,
|
|
|
|
sd_default_probe, NULL, NULL);
|
|
|
|
}
|
2005-04-16 22:20:36 +00:00
|
|
|
|
|
|
|
if (!majors)
|
|
|
|
return -ENODEV;
|
|
|
|
|
2006-10-04 09:32:54 +00:00
|
|
|
err = class_register(&sd_disk_class);
|
|
|
|
if (err)
|
|
|
|
goto err_out;
|
2006-03-18 20:14:21 +00:00
|
|
|
|
2009-09-20 20:49:38 +00:00
|
|
|
sd_cdb_cache = kmem_cache_create("sd_ext_cdb", SD_EXT_CDB_SIZE,
|
|
|
|
0, 0, NULL);
|
|
|
|
if (!sd_cdb_cache) {
|
|
|
|
printk(KERN_ERR "sd: can't init extended cdb cache\n");
|
2014-06-03 21:34:25 +00:00
|
|
|
err = -ENOMEM;
|
2009-09-20 20:49:38 +00:00
|
|
|
goto err_out_class;
|
|
|
|
}
|
|
|
|
|
|
|
|
sd_cdb_pool = mempool_create_slab_pool(SD_MEMPOOL_SIZE, sd_cdb_cache);
|
|
|
|
if (!sd_cdb_pool) {
|
|
|
|
printk(KERN_ERR "sd: can't init extended cdb pool\n");
|
2014-06-03 21:34:25 +00:00
|
|
|
err = -ENOMEM;
|
2009-09-20 20:49:38 +00:00
|
|
|
goto err_out_cache;
|
|
|
|
}
|
|
|
|
|
2012-10-10 08:36:11 +00:00
|
|
|
err = scsi_register_driver(&sd_template.gendrv);
|
|
|
|
if (err)
|
|
|
|
goto err_out_driver;
|
|
|
|
|
2006-10-04 09:32:54 +00:00
|
|
|
return 0;
|
|
|
|
|
2012-10-10 08:36:11 +00:00
|
|
|
err_out_driver:
|
|
|
|
mempool_destroy(sd_cdb_pool);
|
|
|
|
|
2009-09-20 20:49:38 +00:00
|
|
|
err_out_cache:
|
|
|
|
kmem_cache_destroy(sd_cdb_cache);
|
|
|
|
|
2006-10-04 09:32:54 +00:00
|
|
|
err_out_class:
|
|
|
|
class_unregister(&sd_disk_class);
|
|
|
|
err_out:
|
|
|
|
for (i = 0; i < SD_MAJORS; i++)
|
|
|
|
unregister_blkdev(sd_major(i), "sd");
|
|
|
|
return err;
|
2005-04-16 22:20:36 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
/**
|
|
|
|
* exit_sd - exit point for this driver (when it is a module).
|
|
|
|
*
|
|
|
|
* Note: this function unregisters this driver from the scsi mid-level.
|
|
|
|
**/
|
|
|
|
static void __exit exit_sd(void)
|
|
|
|
{
|
|
|
|
int i;
|
|
|
|
|
|
|
|
SCSI_LOG_HLQUEUE(3, printk("exit_sd: exiting sd driver\n"));
|
|
|
|
|
2012-10-10 08:36:11 +00:00
|
|
|
scsi_unregister_driver(&sd_template.gendrv);
|
2009-09-20 20:49:38 +00:00
|
|
|
mempool_destroy(sd_cdb_pool);
|
|
|
|
kmem_cache_destroy(sd_cdb_cache);
|
|
|
|
|
2006-10-04 09:32:54 +00:00
|
|
|
class_unregister(&sd_disk_class);
|
|
|
|
|
2013-05-10 09:06:16 +00:00
|
|
|
for (i = 0; i < SD_MAJORS; i++) {
|
|
|
|
blk_unregister_region(sd_major(i), SD_MINORS);
|
2005-04-16 22:20:36 +00:00
|
|
|
unregister_blkdev(sd_major(i), "sd");
|
2013-05-10 09:06:16 +00:00
|
|
|
}
|
2005-04-16 22:20:36 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
module_init(init_sd);
|
|
|
|
module_exit(exit_sd);
|
2007-02-28 03:40:55 +00:00
|
|
|
|
|
|
|
static void sd_print_sense_hdr(struct scsi_disk *sdkp,
|
|
|
|
struct scsi_sense_hdr *sshdr)
|
|
|
|
{
|
2015-01-08 06:43:46 +00:00
|
|
|
scsi_print_sense_hdr(sdkp->device,
|
|
|
|
sdkp->disk ? sdkp->disk->disk_name : NULL, sshdr);
|
2007-02-28 03:40:55 +00:00
|
|
|
}
|
|
|
|
|
2014-10-24 12:27:00 +00:00
|
|
|
static void sd_print_result(const struct scsi_disk *sdkp, const char *msg,
|
|
|
|
int result)
|
2007-02-28 03:40:55 +00:00
|
|
|
{
|
2014-10-24 12:27:00 +00:00
|
|
|
const char *hb_string = scsi_hostbyte_string(result);
|
|
|
|
const char *db_string = scsi_driverbyte_string(result);
|
|
|
|
|
|
|
|
if (hb_string || db_string)
|
|
|
|
sd_printk(KERN_INFO, sdkp,
|
|
|
|
"%s: Result: hostbyte=%s driverbyte=%s\n", msg,
|
|
|
|
hb_string ? hb_string : "invalid",
|
|
|
|
db_string ? db_string : "invalid");
|
|
|
|
else
|
|
|
|
sd_printk(KERN_INFO, sdkp,
|
|
|
|
"%s: Result: hostbyte=0x%02x driverbyte=0x%02x\n",
|
|
|
|
msg, host_byte(result), driver_byte(result));
|
2007-02-28 03:40:55 +00:00
|
|
|
}
|
|
|
|
|