linux/drivers/clocksource/timer-gx6605s.c

156 lines
4.0 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0
// Copyright (C) 2018 Hangzhou C-SKY Microsystems co.,ltd.
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/sched_clock.h>
#include "timer-of.h"
#define CLKSRC_OFFSET 0x40
#define TIMER_STATUS 0x00
#define TIMER_VALUE 0x04
#define TIMER_CONTRL 0x10
#define TIMER_CONFIG 0x20
#define TIMER_DIV 0x24
#define TIMER_INI 0x28
#define GX6605S_STATUS_CLR BIT(0)
#define GX6605S_CONTRL_RST BIT(0)
#define GX6605S_CONTRL_START BIT(1)
#define GX6605S_CONFIG_EN BIT(0)
#define GX6605S_CONFIG_IRQ_EN BIT(1)
static irqreturn_t gx6605s_timer_interrupt(int irq, void *dev)
{
struct clock_event_device *ce = dev;
void __iomem *base = timer_of_base(to_timer_of(ce));
writel_relaxed(GX6605S_STATUS_CLR, base + TIMER_STATUS);
writel_relaxed(0, base + TIMER_INI);
ce->event_handler(ce);
return IRQ_HANDLED;
}
static int gx6605s_timer_set_oneshot(struct clock_event_device *ce)
{
void __iomem *base = timer_of_base(to_timer_of(ce));
/* reset and stop counter */
writel_relaxed(GX6605S_CONTRL_RST, base + TIMER_CONTRL);
/* enable with irq and start */
writel_relaxed(GX6605S_CONFIG_EN | GX6605S_CONFIG_IRQ_EN,
base + TIMER_CONFIG);
return 0;
}
static int gx6605s_timer_set_next_event(unsigned long delta,
struct clock_event_device *ce)
{
void __iomem *base = timer_of_base(to_timer_of(ce));
/* use reset to pause timer */
writel_relaxed(GX6605S_CONTRL_RST, base + TIMER_CONTRL);
/* config next timeout value */
writel_relaxed(ULONG_MAX - delta, base + TIMER_INI);
writel_relaxed(GX6605S_CONTRL_START, base + TIMER_CONTRL);
return 0;
}
static int gx6605s_timer_shutdown(struct clock_event_device *ce)
{
void __iomem *base = timer_of_base(to_timer_of(ce));
writel_relaxed(0, base + TIMER_CONTRL);
writel_relaxed(0, base + TIMER_CONFIG);
return 0;
}
static struct timer_of to = {
.flags = TIMER_OF_IRQ | TIMER_OF_BASE | TIMER_OF_CLOCK,
.clkevt = {
.rating = 300,
.features = CLOCK_EVT_FEAT_DYNIRQ |
CLOCK_EVT_FEAT_ONESHOT,
.set_state_shutdown = gx6605s_timer_shutdown,
.set_state_oneshot = gx6605s_timer_set_oneshot,
.set_next_event = gx6605s_timer_set_next_event,
.cpumask = cpu_possible_mask,
},
.of_irq = {
.handler = gx6605s_timer_interrupt,
.flags = IRQF_TIMER | IRQF_IRQPOLL,
},
};
static u64 notrace gx6605s_sched_clock_read(void)
{
void __iomem *base;
base = timer_of_base(&to) + CLKSRC_OFFSET;
return (u64)readl_relaxed(base + TIMER_VALUE);
}
static void gx6605s_clkevt_init(void __iomem *base)
{
writel_relaxed(0, base + TIMER_DIV);
writel_relaxed(0, base + TIMER_CONFIG);
clockevents_config_and_register(&to.clkevt, timer_of_rate(&to), 2,
ULONG_MAX);
}
static int gx6605s_clksrc_init(void __iomem *base)
{
writel_relaxed(0, base + TIMER_DIV);
writel_relaxed(0, base + TIMER_INI);
writel_relaxed(GX6605S_CONTRL_RST, base + TIMER_CONTRL);
writel_relaxed(GX6605S_CONFIG_EN, base + TIMER_CONFIG);
writel_relaxed(GX6605S_CONTRL_START, base + TIMER_CONTRL);
sched_clock_register(gx6605s_sched_clock_read, 32, timer_of_rate(&to));
return clocksource_mmio_init(base + TIMER_VALUE, "gx6605s",
timer_of_rate(&to), 200, 32, clocksource_mmio_readl_up);
}
static int __init gx6605s_timer_init(struct device_node *np)
{
int ret;
/*
* The timer driver is for nationalchip gx6605s SOC and there are two
* same timer in gx6605s. We use one for clkevt and another for clksrc.
*
* The timer is mmio map to access, so we need give mmio address in dts.
*
* It provides a 32bit countup timer and interrupt will be caused by
* count-overflow.
* So we need set-next-event by ULONG_MAX - delta in TIMER_INI reg.
*
* The counter at 0x0 offset is clock event.
* The counter at 0x40 offset is clock source.
* They are the same in hardware, just different used by driver.
*/
ret = timer_of_init(np, &to);
if (ret)
return ret;
gx6605s_clkevt_init(timer_of_base(&to));
return gx6605s_clksrc_init(timer_of_base(&to) + CLKSRC_OFFSET);
}
TIMER_OF_DECLARE(csky_gx6605s_timer, "csky,gx6605s-timer", gx6605s_timer_init);