linux/drivers/vdpa/vdpa.c

1224 lines
30 KiB
C
Raw Normal View History

vDPA: introduce vDPA bus vDPA device is a device that uses a datapath which complies with the virtio specifications with vendor specific control path. vDPA devices can be both physically located on the hardware or emulated by software. vDPA hardware devices are usually implemented through PCIE with the following types: - PF (Physical Function) - A single Physical Function - VF (Virtual Function) - Device that supports single root I/O virtualization (SR-IOV). Its Virtual Function (VF) represents a virtualized instance of the device that can be assigned to different partitions - ADI (Assignable Device Interface) and its equivalents - With technologies such as Intel Scalable IOV, a virtual device (VDEV) composed by host OS utilizing one or more ADIs. Or its equivalent like SF (Sub function) from Mellanox. >From a driver's perspective, depends on how and where the DMA translation is done, vDPA devices are split into two types: - Platform specific DMA translation - From the driver's perspective, the device can be used on a platform where device access to data in memory is limited and/or translated. An example is a PCIE vDPA whose DMA request was tagged via a bus (e.g PCIE) specific way. DMA translation and protection are done at PCIE bus IOMMU level. - Device specific DMA translation - The device implements DMA isolation and protection through its own logic. An example is a vDPA device which uses on-chip IOMMU. To hide the differences and complexity of the above types for a vDPA device/IOMMU options and in order to present a generic virtio device to the upper layer, a device agnostic framework is required. This patch introduces a software vDPA bus which abstracts the common attributes of vDPA device, vDPA bus driver and the communication method (vdpa_config_ops) between the vDPA device abstraction and the vDPA bus driver. This allows multiple types of drivers to be used for vDPA device like the virtio_vdpa and vhost_vdpa driver to operate on the bus and allow vDPA device could be used by either kernel virtio driver or userspace vhost drivers as: virtio drivers vhost drivers | | [virtio bus] [vhost uAPI] | | virtio device vhost device virtio_vdpa drv vhost_vdpa drv \ / [vDPA bus] | vDPA device hardware drv | [hardware bus] | vDPA hardware With the abstraction of vDPA bus and vDPA bus operations, the difference and complexity of the under layer hardware is hidden from upper layer. The vDPA bus drivers on top can use a unified vdpa_config_ops to control different types of vDPA device. Signed-off-by: Jason Wang <jasowang@redhat.com> Link: https://lore.kernel.org/r/20200326140125.19794-6-jasowang@redhat.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-03-26 14:01:21 +00:00
// SPDX-License-Identifier: GPL-2.0-only
/*
* vDPA bus.
*
* Copyright (c) 2020, Red Hat. All rights reserved.
* Author: Jason Wang <jasowang@redhat.com>
*
*/
#include <linux/module.h>
#include <linux/idr.h>
#include <linux/slab.h>
#include <linux/vdpa.h>
vdpa: Define vdpa mgmt device, ops and a netlink interface To add one or more VDPA devices, define a management device which allows adding or removing vdpa device. A management device defines set of callbacks to manage vdpa devices. To begin with, it defines add and remove callbacks through which a user defined vdpa device can be added or removed. A unique management device is identified by its unique handle identified by management device name and optionally the bus name. Hence, introduce routine through which driver can register a management device and its callback operations for adding and remove a vdpa device. Introduce vdpa netlink socket family so that user can query management device and its attributes. Example of show vdpa management device which allows creating vdpa device of networking class (device id = 0x1) of virtio specification 1.1 section 5.1.1. $ vdpa mgmtdev show vdpasim_net: supported_classes: net Example of showing vdpa management device in JSON format. $ vdpa mgmtdev show -jp { "show": { "vdpasim_net": { "supported_classes": [ "net" ] } } } Signed-off-by: Parav Pandit <parav@nvidia.com> Reviewed-by: Eli Cohen <elic@nvidia.com> Reviewed-by: Jason Wang <jasowang@redhat.com> Link: https://lore.kernel.org/r/20210105103203.82508-4-parav@nvidia.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Including a bugfix: vpda: correctly size vdpa_nl_policy We need to ensure last entry of vdpa_nl_policy[] is zero, otherwise out-of-bounds access is hurting us. Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Cc: Parav Pandit <parav@nvidia.com> Cc: Eli Cohen <elic@nvidia.com> Cc: Jason Wang <jasowang@redhat.com> Cc: Michael S. Tsirkin <mst@redhat.com> Link: https://lore.kernel.org/r/20210210134911.4119555-1-eric.dumazet@gmail.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-01-05 10:32:00 +00:00
#include <uapi/linux/vdpa.h>
#include <net/genetlink.h>
#include <linux/mod_devicetable.h>
#include <linux/virtio_ids.h>
vDPA: introduce vDPA bus vDPA device is a device that uses a datapath which complies with the virtio specifications with vendor specific control path. vDPA devices can be both physically located on the hardware or emulated by software. vDPA hardware devices are usually implemented through PCIE with the following types: - PF (Physical Function) - A single Physical Function - VF (Virtual Function) - Device that supports single root I/O virtualization (SR-IOV). Its Virtual Function (VF) represents a virtualized instance of the device that can be assigned to different partitions - ADI (Assignable Device Interface) and its equivalents - With technologies such as Intel Scalable IOV, a virtual device (VDEV) composed by host OS utilizing one or more ADIs. Or its equivalent like SF (Sub function) from Mellanox. >From a driver's perspective, depends on how and where the DMA translation is done, vDPA devices are split into two types: - Platform specific DMA translation - From the driver's perspective, the device can be used on a platform where device access to data in memory is limited and/or translated. An example is a PCIE vDPA whose DMA request was tagged via a bus (e.g PCIE) specific way. DMA translation and protection are done at PCIE bus IOMMU level. - Device specific DMA translation - The device implements DMA isolation and protection through its own logic. An example is a vDPA device which uses on-chip IOMMU. To hide the differences and complexity of the above types for a vDPA device/IOMMU options and in order to present a generic virtio device to the upper layer, a device agnostic framework is required. This patch introduces a software vDPA bus which abstracts the common attributes of vDPA device, vDPA bus driver and the communication method (vdpa_config_ops) between the vDPA device abstraction and the vDPA bus driver. This allows multiple types of drivers to be used for vDPA device like the virtio_vdpa and vhost_vdpa driver to operate on the bus and allow vDPA device could be used by either kernel virtio driver or userspace vhost drivers as: virtio drivers vhost drivers | | [virtio bus] [vhost uAPI] | | virtio device vhost device virtio_vdpa drv vhost_vdpa drv \ / [vDPA bus] | vDPA device hardware drv | [hardware bus] | vDPA hardware With the abstraction of vDPA bus and vDPA bus operations, the difference and complexity of the under layer hardware is hidden from upper layer. The vDPA bus drivers on top can use a unified vdpa_config_ops to control different types of vDPA device. Signed-off-by: Jason Wang <jasowang@redhat.com> Link: https://lore.kernel.org/r/20200326140125.19794-6-jasowang@redhat.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-03-26 14:01:21 +00:00
vdpa: Define vdpa mgmt device, ops and a netlink interface To add one or more VDPA devices, define a management device which allows adding or removing vdpa device. A management device defines set of callbacks to manage vdpa devices. To begin with, it defines add and remove callbacks through which a user defined vdpa device can be added or removed. A unique management device is identified by its unique handle identified by management device name and optionally the bus name. Hence, introduce routine through which driver can register a management device and its callback operations for adding and remove a vdpa device. Introduce vdpa netlink socket family so that user can query management device and its attributes. Example of show vdpa management device which allows creating vdpa device of networking class (device id = 0x1) of virtio specification 1.1 section 5.1.1. $ vdpa mgmtdev show vdpasim_net: supported_classes: net Example of showing vdpa management device in JSON format. $ vdpa mgmtdev show -jp { "show": { "vdpasim_net": { "supported_classes": [ "net" ] } } } Signed-off-by: Parav Pandit <parav@nvidia.com> Reviewed-by: Eli Cohen <elic@nvidia.com> Reviewed-by: Jason Wang <jasowang@redhat.com> Link: https://lore.kernel.org/r/20210105103203.82508-4-parav@nvidia.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Including a bugfix: vpda: correctly size vdpa_nl_policy We need to ensure last entry of vdpa_nl_policy[] is zero, otherwise out-of-bounds access is hurting us. Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Cc: Parav Pandit <parav@nvidia.com> Cc: Eli Cohen <elic@nvidia.com> Cc: Jason Wang <jasowang@redhat.com> Cc: Michael S. Tsirkin <mst@redhat.com> Link: https://lore.kernel.org/r/20210210134911.4119555-1-eric.dumazet@gmail.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-01-05 10:32:00 +00:00
static LIST_HEAD(mdev_head);
/* A global mutex that protects vdpa management device and device level operations. */
static DECLARE_RWSEM(vdpa_dev_lock);
vDPA: introduce vDPA bus vDPA device is a device that uses a datapath which complies with the virtio specifications with vendor specific control path. vDPA devices can be both physically located on the hardware or emulated by software. vDPA hardware devices are usually implemented through PCIE with the following types: - PF (Physical Function) - A single Physical Function - VF (Virtual Function) - Device that supports single root I/O virtualization (SR-IOV). Its Virtual Function (VF) represents a virtualized instance of the device that can be assigned to different partitions - ADI (Assignable Device Interface) and its equivalents - With technologies such as Intel Scalable IOV, a virtual device (VDEV) composed by host OS utilizing one or more ADIs. Or its equivalent like SF (Sub function) from Mellanox. >From a driver's perspective, depends on how and where the DMA translation is done, vDPA devices are split into two types: - Platform specific DMA translation - From the driver's perspective, the device can be used on a platform where device access to data in memory is limited and/or translated. An example is a PCIE vDPA whose DMA request was tagged via a bus (e.g PCIE) specific way. DMA translation and protection are done at PCIE bus IOMMU level. - Device specific DMA translation - The device implements DMA isolation and protection through its own logic. An example is a vDPA device which uses on-chip IOMMU. To hide the differences and complexity of the above types for a vDPA device/IOMMU options and in order to present a generic virtio device to the upper layer, a device agnostic framework is required. This patch introduces a software vDPA bus which abstracts the common attributes of vDPA device, vDPA bus driver and the communication method (vdpa_config_ops) between the vDPA device abstraction and the vDPA bus driver. This allows multiple types of drivers to be used for vDPA device like the virtio_vdpa and vhost_vdpa driver to operate on the bus and allow vDPA device could be used by either kernel virtio driver or userspace vhost drivers as: virtio drivers vhost drivers | | [virtio bus] [vhost uAPI] | | virtio device vhost device virtio_vdpa drv vhost_vdpa drv \ / [vDPA bus] | vDPA device hardware drv | [hardware bus] | vDPA hardware With the abstraction of vDPA bus and vDPA bus operations, the difference and complexity of the under layer hardware is hidden from upper layer. The vDPA bus drivers on top can use a unified vdpa_config_ops to control different types of vDPA device. Signed-off-by: Jason Wang <jasowang@redhat.com> Link: https://lore.kernel.org/r/20200326140125.19794-6-jasowang@redhat.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-03-26 14:01:21 +00:00
static DEFINE_IDA(vdpa_index_ida);
void vdpa_set_status(struct vdpa_device *vdev, u8 status)
{
down_write(&vdev->cf_lock);
vdev->config->set_status(vdev, status);
up_write(&vdev->cf_lock);
}
EXPORT_SYMBOL(vdpa_set_status);
vdpa: Define vdpa mgmt device, ops and a netlink interface To add one or more VDPA devices, define a management device which allows adding or removing vdpa device. A management device defines set of callbacks to manage vdpa devices. To begin with, it defines add and remove callbacks through which a user defined vdpa device can be added or removed. A unique management device is identified by its unique handle identified by management device name and optionally the bus name. Hence, introduce routine through which driver can register a management device and its callback operations for adding and remove a vdpa device. Introduce vdpa netlink socket family so that user can query management device and its attributes. Example of show vdpa management device which allows creating vdpa device of networking class (device id = 0x1) of virtio specification 1.1 section 5.1.1. $ vdpa mgmtdev show vdpasim_net: supported_classes: net Example of showing vdpa management device in JSON format. $ vdpa mgmtdev show -jp { "show": { "vdpasim_net": { "supported_classes": [ "net" ] } } } Signed-off-by: Parav Pandit <parav@nvidia.com> Reviewed-by: Eli Cohen <elic@nvidia.com> Reviewed-by: Jason Wang <jasowang@redhat.com> Link: https://lore.kernel.org/r/20210105103203.82508-4-parav@nvidia.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Including a bugfix: vpda: correctly size vdpa_nl_policy We need to ensure last entry of vdpa_nl_policy[] is zero, otherwise out-of-bounds access is hurting us. Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Cc: Parav Pandit <parav@nvidia.com> Cc: Eli Cohen <elic@nvidia.com> Cc: Jason Wang <jasowang@redhat.com> Cc: Michael S. Tsirkin <mst@redhat.com> Link: https://lore.kernel.org/r/20210210134911.4119555-1-eric.dumazet@gmail.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-01-05 10:32:00 +00:00
static struct genl_family vdpa_nl_family;
vDPA: introduce vDPA bus vDPA device is a device that uses a datapath which complies with the virtio specifications with vendor specific control path. vDPA devices can be both physically located on the hardware or emulated by software. vDPA hardware devices are usually implemented through PCIE with the following types: - PF (Physical Function) - A single Physical Function - VF (Virtual Function) - Device that supports single root I/O virtualization (SR-IOV). Its Virtual Function (VF) represents a virtualized instance of the device that can be assigned to different partitions - ADI (Assignable Device Interface) and its equivalents - With technologies such as Intel Scalable IOV, a virtual device (VDEV) composed by host OS utilizing one or more ADIs. Or its equivalent like SF (Sub function) from Mellanox. >From a driver's perspective, depends on how and where the DMA translation is done, vDPA devices are split into two types: - Platform specific DMA translation - From the driver's perspective, the device can be used on a platform where device access to data in memory is limited and/or translated. An example is a PCIE vDPA whose DMA request was tagged via a bus (e.g PCIE) specific way. DMA translation and protection are done at PCIE bus IOMMU level. - Device specific DMA translation - The device implements DMA isolation and protection through its own logic. An example is a vDPA device which uses on-chip IOMMU. To hide the differences and complexity of the above types for a vDPA device/IOMMU options and in order to present a generic virtio device to the upper layer, a device agnostic framework is required. This patch introduces a software vDPA bus which abstracts the common attributes of vDPA device, vDPA bus driver and the communication method (vdpa_config_ops) between the vDPA device abstraction and the vDPA bus driver. This allows multiple types of drivers to be used for vDPA device like the virtio_vdpa and vhost_vdpa driver to operate on the bus and allow vDPA device could be used by either kernel virtio driver or userspace vhost drivers as: virtio drivers vhost drivers | | [virtio bus] [vhost uAPI] | | virtio device vhost device virtio_vdpa drv vhost_vdpa drv \ / [vDPA bus] | vDPA device hardware drv | [hardware bus] | vDPA hardware With the abstraction of vDPA bus and vDPA bus operations, the difference and complexity of the under layer hardware is hidden from upper layer. The vDPA bus drivers on top can use a unified vdpa_config_ops to control different types of vDPA device. Signed-off-by: Jason Wang <jasowang@redhat.com> Link: https://lore.kernel.org/r/20200326140125.19794-6-jasowang@redhat.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-03-26 14:01:21 +00:00
static int vdpa_dev_probe(struct device *d)
{
struct vdpa_device *vdev = dev_to_vdpa(d);
struct vdpa_driver *drv = drv_to_vdpa(vdev->dev.driver);
const struct vdpa_config_ops *ops = vdev->config;
u32 max_num, min_num = 1;
vDPA: introduce vDPA bus vDPA device is a device that uses a datapath which complies with the virtio specifications with vendor specific control path. vDPA devices can be both physically located on the hardware or emulated by software. vDPA hardware devices are usually implemented through PCIE with the following types: - PF (Physical Function) - A single Physical Function - VF (Virtual Function) - Device that supports single root I/O virtualization (SR-IOV). Its Virtual Function (VF) represents a virtualized instance of the device that can be assigned to different partitions - ADI (Assignable Device Interface) and its equivalents - With technologies such as Intel Scalable IOV, a virtual device (VDEV) composed by host OS utilizing one or more ADIs. Or its equivalent like SF (Sub function) from Mellanox. >From a driver's perspective, depends on how and where the DMA translation is done, vDPA devices are split into two types: - Platform specific DMA translation - From the driver's perspective, the device can be used on a platform where device access to data in memory is limited and/or translated. An example is a PCIE vDPA whose DMA request was tagged via a bus (e.g PCIE) specific way. DMA translation and protection are done at PCIE bus IOMMU level. - Device specific DMA translation - The device implements DMA isolation and protection through its own logic. An example is a vDPA device which uses on-chip IOMMU. To hide the differences and complexity of the above types for a vDPA device/IOMMU options and in order to present a generic virtio device to the upper layer, a device agnostic framework is required. This patch introduces a software vDPA bus which abstracts the common attributes of vDPA device, vDPA bus driver and the communication method (vdpa_config_ops) between the vDPA device abstraction and the vDPA bus driver. This allows multiple types of drivers to be used for vDPA device like the virtio_vdpa and vhost_vdpa driver to operate on the bus and allow vDPA device could be used by either kernel virtio driver or userspace vhost drivers as: virtio drivers vhost drivers | | [virtio bus] [vhost uAPI] | | virtio device vhost device virtio_vdpa drv vhost_vdpa drv \ / [vDPA bus] | vDPA device hardware drv | [hardware bus] | vDPA hardware With the abstraction of vDPA bus and vDPA bus operations, the difference and complexity of the under layer hardware is hidden from upper layer. The vDPA bus drivers on top can use a unified vdpa_config_ops to control different types of vDPA device. Signed-off-by: Jason Wang <jasowang@redhat.com> Link: https://lore.kernel.org/r/20200326140125.19794-6-jasowang@redhat.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-03-26 14:01:21 +00:00
int ret = 0;
max_num = ops->get_vq_num_max(vdev);
if (ops->get_vq_num_min)
min_num = ops->get_vq_num_min(vdev);
if (max_num < min_num)
return -EINVAL;
vDPA: introduce vDPA bus vDPA device is a device that uses a datapath which complies with the virtio specifications with vendor specific control path. vDPA devices can be both physically located on the hardware or emulated by software. vDPA hardware devices are usually implemented through PCIE with the following types: - PF (Physical Function) - A single Physical Function - VF (Virtual Function) - Device that supports single root I/O virtualization (SR-IOV). Its Virtual Function (VF) represents a virtualized instance of the device that can be assigned to different partitions - ADI (Assignable Device Interface) and its equivalents - With technologies such as Intel Scalable IOV, a virtual device (VDEV) composed by host OS utilizing one or more ADIs. Or its equivalent like SF (Sub function) from Mellanox. >From a driver's perspective, depends on how and where the DMA translation is done, vDPA devices are split into two types: - Platform specific DMA translation - From the driver's perspective, the device can be used on a platform where device access to data in memory is limited and/or translated. An example is a PCIE vDPA whose DMA request was tagged via a bus (e.g PCIE) specific way. DMA translation and protection are done at PCIE bus IOMMU level. - Device specific DMA translation - The device implements DMA isolation and protection through its own logic. An example is a vDPA device which uses on-chip IOMMU. To hide the differences and complexity of the above types for a vDPA device/IOMMU options and in order to present a generic virtio device to the upper layer, a device agnostic framework is required. This patch introduces a software vDPA bus which abstracts the common attributes of vDPA device, vDPA bus driver and the communication method (vdpa_config_ops) between the vDPA device abstraction and the vDPA bus driver. This allows multiple types of drivers to be used for vDPA device like the virtio_vdpa and vhost_vdpa driver to operate on the bus and allow vDPA device could be used by either kernel virtio driver or userspace vhost drivers as: virtio drivers vhost drivers | | [virtio bus] [vhost uAPI] | | virtio device vhost device virtio_vdpa drv vhost_vdpa drv \ / [vDPA bus] | vDPA device hardware drv | [hardware bus] | vDPA hardware With the abstraction of vDPA bus and vDPA bus operations, the difference and complexity of the under layer hardware is hidden from upper layer. The vDPA bus drivers on top can use a unified vdpa_config_ops to control different types of vDPA device. Signed-off-by: Jason Wang <jasowang@redhat.com> Link: https://lore.kernel.org/r/20200326140125.19794-6-jasowang@redhat.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-03-26 14:01:21 +00:00
if (drv && drv->probe)
ret = drv->probe(vdev);
return ret;
}
bus: Make remove callback return void The driver core ignores the return value of this callback because there is only little it can do when a device disappears. This is the final bit of a long lasting cleanup quest where several buses were converted to also return void from their remove callback. Additionally some resource leaks were fixed that were caused by drivers returning an error code in the expectation that the driver won't go away. With struct bus_type::remove returning void it's prevented that newly implemented buses return an ignored error code and so don't anticipate wrong expectations for driver authors. Reviewed-by: Tom Rix <trix@redhat.com> (For fpga) Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org> Reviewed-by: Cornelia Huck <cohuck@redhat.com> (For drivers/s390 and drivers/vfio) Acked-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> (For ARM, Amba and related parts) Acked-by: Mark Brown <broonie@kernel.org> Acked-by: Chen-Yu Tsai <wens@csie.org> (for sunxi-rsb) Acked-by: Pali Rohár <pali@kernel.org> Acked-by: Mauro Carvalho Chehab <mchehab@kernel.org> (for media) Acked-by: Hans de Goede <hdegoede@redhat.com> (For drivers/platform) Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Acked-By: Vinod Koul <vkoul@kernel.org> Acked-by: Juergen Gross <jgross@suse.com> (For xen) Acked-by: Lee Jones <lee.jones@linaro.org> (For mfd) Acked-by: Johannes Thumshirn <jth@kernel.org> (For mcb) Acked-by: Johan Hovold <johan@kernel.org> Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> (For slimbus) Acked-by: Kirti Wankhede <kwankhede@nvidia.com> (For vfio) Acked-by: Maximilian Luz <luzmaximilian@gmail.com> Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> (For ulpi and typec) Acked-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com> (For ipack) Acked-by: Geoff Levand <geoff@infradead.org> (For ps3) Acked-by: Yehezkel Bernat <YehezkelShB@gmail.com> (For thunderbolt) Acked-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> (For intel_th) Acked-by: Dominik Brodowski <linux@dominikbrodowski.net> (For pcmcia) Acked-by: Rafael J. Wysocki <rafael@kernel.org> (For ACPI) Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> (rpmsg and apr) Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> (For intel-ish-hid) Acked-by: Dan Williams <dan.j.williams@intel.com> (For CXL, DAX, and NVDIMM) Acked-by: William Breathitt Gray <vilhelm.gray@gmail.com> (For isa) Acked-by: Stefan Richter <stefanr@s5r6.in-berlin.de> (For firewire) Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> (For hid) Acked-by: Thorsten Scherer <t.scherer@eckelmann.de> (For siox) Acked-by: Sven Van Asbroeck <TheSven73@gmail.com> (For anybuss) Acked-by: Ulf Hansson <ulf.hansson@linaro.org> (For MMC) Acked-by: Wolfram Sang <wsa@kernel.org> # for I2C Acked-by: Sudeep Holla <sudeep.holla@arm.com> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Finn Thain <fthain@linux-m68k.org> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20210713193522.1770306-6-u.kleine-koenig@pengutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-13 19:35:22 +00:00
static void vdpa_dev_remove(struct device *d)
vDPA: introduce vDPA bus vDPA device is a device that uses a datapath which complies with the virtio specifications with vendor specific control path. vDPA devices can be both physically located on the hardware or emulated by software. vDPA hardware devices are usually implemented through PCIE with the following types: - PF (Physical Function) - A single Physical Function - VF (Virtual Function) - Device that supports single root I/O virtualization (SR-IOV). Its Virtual Function (VF) represents a virtualized instance of the device that can be assigned to different partitions - ADI (Assignable Device Interface) and its equivalents - With technologies such as Intel Scalable IOV, a virtual device (VDEV) composed by host OS utilizing one or more ADIs. Or its equivalent like SF (Sub function) from Mellanox. >From a driver's perspective, depends on how and where the DMA translation is done, vDPA devices are split into two types: - Platform specific DMA translation - From the driver's perspective, the device can be used on a platform where device access to data in memory is limited and/or translated. An example is a PCIE vDPA whose DMA request was tagged via a bus (e.g PCIE) specific way. DMA translation and protection are done at PCIE bus IOMMU level. - Device specific DMA translation - The device implements DMA isolation and protection through its own logic. An example is a vDPA device which uses on-chip IOMMU. To hide the differences and complexity of the above types for a vDPA device/IOMMU options and in order to present a generic virtio device to the upper layer, a device agnostic framework is required. This patch introduces a software vDPA bus which abstracts the common attributes of vDPA device, vDPA bus driver and the communication method (vdpa_config_ops) between the vDPA device abstraction and the vDPA bus driver. This allows multiple types of drivers to be used for vDPA device like the virtio_vdpa and vhost_vdpa driver to operate on the bus and allow vDPA device could be used by either kernel virtio driver or userspace vhost drivers as: virtio drivers vhost drivers | | [virtio bus] [vhost uAPI] | | virtio device vhost device virtio_vdpa drv vhost_vdpa drv \ / [vDPA bus] | vDPA device hardware drv | [hardware bus] | vDPA hardware With the abstraction of vDPA bus and vDPA bus operations, the difference and complexity of the under layer hardware is hidden from upper layer. The vDPA bus drivers on top can use a unified vdpa_config_ops to control different types of vDPA device. Signed-off-by: Jason Wang <jasowang@redhat.com> Link: https://lore.kernel.org/r/20200326140125.19794-6-jasowang@redhat.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-03-26 14:01:21 +00:00
{
struct vdpa_device *vdev = dev_to_vdpa(d);
struct vdpa_driver *drv = drv_to_vdpa(vdev->dev.driver);
if (drv && drv->remove)
drv->remove(vdev);
}
static int vdpa_dev_match(struct device *dev, struct device_driver *drv)
{
struct vdpa_device *vdev = dev_to_vdpa(dev);
/* Check override first, and if set, only use the named driver */
if (vdev->driver_override)
return strcmp(vdev->driver_override, drv->name) == 0;
/* Currently devices must be supported by all vDPA bus drivers */
return 1;
}
static ssize_t driver_override_store(struct device *dev,
struct device_attribute *attr,
const char *buf, size_t count)
{
struct vdpa_device *vdev = dev_to_vdpa(dev);
int ret;
ret = driver_set_override(dev, &vdev->driver_override, buf, count);
if (ret)
return ret;
return count;
}
static ssize_t driver_override_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct vdpa_device *vdev = dev_to_vdpa(dev);
ssize_t len;
device_lock(dev);
len = snprintf(buf, PAGE_SIZE, "%s\n", vdev->driver_override);
device_unlock(dev);
return len;
}
static DEVICE_ATTR_RW(driver_override);
static struct attribute *vdpa_dev_attrs[] = {
&dev_attr_driver_override.attr,
NULL,
};
static const struct attribute_group vdpa_dev_group = {
.attrs = vdpa_dev_attrs,
};
__ATTRIBUTE_GROUPS(vdpa_dev);
vDPA: introduce vDPA bus vDPA device is a device that uses a datapath which complies with the virtio specifications with vendor specific control path. vDPA devices can be both physically located on the hardware or emulated by software. vDPA hardware devices are usually implemented through PCIE with the following types: - PF (Physical Function) - A single Physical Function - VF (Virtual Function) - Device that supports single root I/O virtualization (SR-IOV). Its Virtual Function (VF) represents a virtualized instance of the device that can be assigned to different partitions - ADI (Assignable Device Interface) and its equivalents - With technologies such as Intel Scalable IOV, a virtual device (VDEV) composed by host OS utilizing one or more ADIs. Or its equivalent like SF (Sub function) from Mellanox. >From a driver's perspective, depends on how and where the DMA translation is done, vDPA devices are split into two types: - Platform specific DMA translation - From the driver's perspective, the device can be used on a platform where device access to data in memory is limited and/or translated. An example is a PCIE vDPA whose DMA request was tagged via a bus (e.g PCIE) specific way. DMA translation and protection are done at PCIE bus IOMMU level. - Device specific DMA translation - The device implements DMA isolation and protection through its own logic. An example is a vDPA device which uses on-chip IOMMU. To hide the differences and complexity of the above types for a vDPA device/IOMMU options and in order to present a generic virtio device to the upper layer, a device agnostic framework is required. This patch introduces a software vDPA bus which abstracts the common attributes of vDPA device, vDPA bus driver and the communication method (vdpa_config_ops) between the vDPA device abstraction and the vDPA bus driver. This allows multiple types of drivers to be used for vDPA device like the virtio_vdpa and vhost_vdpa driver to operate on the bus and allow vDPA device could be used by either kernel virtio driver or userspace vhost drivers as: virtio drivers vhost drivers | | [virtio bus] [vhost uAPI] | | virtio device vhost device virtio_vdpa drv vhost_vdpa drv \ / [vDPA bus] | vDPA device hardware drv | [hardware bus] | vDPA hardware With the abstraction of vDPA bus and vDPA bus operations, the difference and complexity of the under layer hardware is hidden from upper layer. The vDPA bus drivers on top can use a unified vdpa_config_ops to control different types of vDPA device. Signed-off-by: Jason Wang <jasowang@redhat.com> Link: https://lore.kernel.org/r/20200326140125.19794-6-jasowang@redhat.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-03-26 14:01:21 +00:00
static struct bus_type vdpa_bus = {
.name = "vdpa",
.dev_groups = vdpa_dev_groups,
.match = vdpa_dev_match,
vDPA: introduce vDPA bus vDPA device is a device that uses a datapath which complies with the virtio specifications with vendor specific control path. vDPA devices can be both physically located on the hardware or emulated by software. vDPA hardware devices are usually implemented through PCIE with the following types: - PF (Physical Function) - A single Physical Function - VF (Virtual Function) - Device that supports single root I/O virtualization (SR-IOV). Its Virtual Function (VF) represents a virtualized instance of the device that can be assigned to different partitions - ADI (Assignable Device Interface) and its equivalents - With technologies such as Intel Scalable IOV, a virtual device (VDEV) composed by host OS utilizing one or more ADIs. Or its equivalent like SF (Sub function) from Mellanox. >From a driver's perspective, depends on how and where the DMA translation is done, vDPA devices are split into two types: - Platform specific DMA translation - From the driver's perspective, the device can be used on a platform where device access to data in memory is limited and/or translated. An example is a PCIE vDPA whose DMA request was tagged via a bus (e.g PCIE) specific way. DMA translation and protection are done at PCIE bus IOMMU level. - Device specific DMA translation - The device implements DMA isolation and protection through its own logic. An example is a vDPA device which uses on-chip IOMMU. To hide the differences and complexity of the above types for a vDPA device/IOMMU options and in order to present a generic virtio device to the upper layer, a device agnostic framework is required. This patch introduces a software vDPA bus which abstracts the common attributes of vDPA device, vDPA bus driver and the communication method (vdpa_config_ops) between the vDPA device abstraction and the vDPA bus driver. This allows multiple types of drivers to be used for vDPA device like the virtio_vdpa and vhost_vdpa driver to operate on the bus and allow vDPA device could be used by either kernel virtio driver or userspace vhost drivers as: virtio drivers vhost drivers | | [virtio bus] [vhost uAPI] | | virtio device vhost device virtio_vdpa drv vhost_vdpa drv \ / [vDPA bus] | vDPA device hardware drv | [hardware bus] | vDPA hardware With the abstraction of vDPA bus and vDPA bus operations, the difference and complexity of the under layer hardware is hidden from upper layer. The vDPA bus drivers on top can use a unified vdpa_config_ops to control different types of vDPA device. Signed-off-by: Jason Wang <jasowang@redhat.com> Link: https://lore.kernel.org/r/20200326140125.19794-6-jasowang@redhat.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-03-26 14:01:21 +00:00
.probe = vdpa_dev_probe,
.remove = vdpa_dev_remove,
};
static void vdpa_release_dev(struct device *d)
{
struct vdpa_device *vdev = dev_to_vdpa(d);
const struct vdpa_config_ops *ops = vdev->config;
if (ops->free)
ops->free(vdev);
ida_simple_remove(&vdpa_index_ida, vdev->index);
kfree(vdev->driver_override);
vDPA: introduce vDPA bus vDPA device is a device that uses a datapath which complies with the virtio specifications with vendor specific control path. vDPA devices can be both physically located on the hardware or emulated by software. vDPA hardware devices are usually implemented through PCIE with the following types: - PF (Physical Function) - A single Physical Function - VF (Virtual Function) - Device that supports single root I/O virtualization (SR-IOV). Its Virtual Function (VF) represents a virtualized instance of the device that can be assigned to different partitions - ADI (Assignable Device Interface) and its equivalents - With technologies such as Intel Scalable IOV, a virtual device (VDEV) composed by host OS utilizing one or more ADIs. Or its equivalent like SF (Sub function) from Mellanox. >From a driver's perspective, depends on how and where the DMA translation is done, vDPA devices are split into two types: - Platform specific DMA translation - From the driver's perspective, the device can be used on a platform where device access to data in memory is limited and/or translated. An example is a PCIE vDPA whose DMA request was tagged via a bus (e.g PCIE) specific way. DMA translation and protection are done at PCIE bus IOMMU level. - Device specific DMA translation - The device implements DMA isolation and protection through its own logic. An example is a vDPA device which uses on-chip IOMMU. To hide the differences and complexity of the above types for a vDPA device/IOMMU options and in order to present a generic virtio device to the upper layer, a device agnostic framework is required. This patch introduces a software vDPA bus which abstracts the common attributes of vDPA device, vDPA bus driver and the communication method (vdpa_config_ops) between the vDPA device abstraction and the vDPA bus driver. This allows multiple types of drivers to be used for vDPA device like the virtio_vdpa and vhost_vdpa driver to operate on the bus and allow vDPA device could be used by either kernel virtio driver or userspace vhost drivers as: virtio drivers vhost drivers | | [virtio bus] [vhost uAPI] | | virtio device vhost device virtio_vdpa drv vhost_vdpa drv \ / [vDPA bus] | vDPA device hardware drv | [hardware bus] | vDPA hardware With the abstraction of vDPA bus and vDPA bus operations, the difference and complexity of the under layer hardware is hidden from upper layer. The vDPA bus drivers on top can use a unified vdpa_config_ops to control different types of vDPA device. Signed-off-by: Jason Wang <jasowang@redhat.com> Link: https://lore.kernel.org/r/20200326140125.19794-6-jasowang@redhat.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-03-26 14:01:21 +00:00
kfree(vdev);
}
/**
* __vdpa_alloc_device - allocate and initilaize a vDPA device
* This allows driver to some prepartion after device is
* initialized but before registered.
* @parent: the parent device
* @config: the bus operations that is supported by this device
* @ngroups: number of groups supported by this device
* @nas: number of address spaces supported by this device
vDPA: introduce vDPA bus vDPA device is a device that uses a datapath which complies with the virtio specifications with vendor specific control path. vDPA devices can be both physically located on the hardware or emulated by software. vDPA hardware devices are usually implemented through PCIE with the following types: - PF (Physical Function) - A single Physical Function - VF (Virtual Function) - Device that supports single root I/O virtualization (SR-IOV). Its Virtual Function (VF) represents a virtualized instance of the device that can be assigned to different partitions - ADI (Assignable Device Interface) and its equivalents - With technologies such as Intel Scalable IOV, a virtual device (VDEV) composed by host OS utilizing one or more ADIs. Or its equivalent like SF (Sub function) from Mellanox. >From a driver's perspective, depends on how and where the DMA translation is done, vDPA devices are split into two types: - Platform specific DMA translation - From the driver's perspective, the device can be used on a platform where device access to data in memory is limited and/or translated. An example is a PCIE vDPA whose DMA request was tagged via a bus (e.g PCIE) specific way. DMA translation and protection are done at PCIE bus IOMMU level. - Device specific DMA translation - The device implements DMA isolation and protection through its own logic. An example is a vDPA device which uses on-chip IOMMU. To hide the differences and complexity of the above types for a vDPA device/IOMMU options and in order to present a generic virtio device to the upper layer, a device agnostic framework is required. This patch introduces a software vDPA bus which abstracts the common attributes of vDPA device, vDPA bus driver and the communication method (vdpa_config_ops) between the vDPA device abstraction and the vDPA bus driver. This allows multiple types of drivers to be used for vDPA device like the virtio_vdpa and vhost_vdpa driver to operate on the bus and allow vDPA device could be used by either kernel virtio driver or userspace vhost drivers as: virtio drivers vhost drivers | | [virtio bus] [vhost uAPI] | | virtio device vhost device virtio_vdpa drv vhost_vdpa drv \ / [vDPA bus] | vDPA device hardware drv | [hardware bus] | vDPA hardware With the abstraction of vDPA bus and vDPA bus operations, the difference and complexity of the under layer hardware is hidden from upper layer. The vDPA bus drivers on top can use a unified vdpa_config_ops to control different types of vDPA device. Signed-off-by: Jason Wang <jasowang@redhat.com> Link: https://lore.kernel.org/r/20200326140125.19794-6-jasowang@redhat.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-03-26 14:01:21 +00:00
* @size: size of the parent structure that contains private data
* @name: name of the vdpa device; optional.
* @use_va: indicate whether virtual address must be used by this device
vDPA: introduce vDPA bus vDPA device is a device that uses a datapath which complies with the virtio specifications with vendor specific control path. vDPA devices can be both physically located on the hardware or emulated by software. vDPA hardware devices are usually implemented through PCIE with the following types: - PF (Physical Function) - A single Physical Function - VF (Virtual Function) - Device that supports single root I/O virtualization (SR-IOV). Its Virtual Function (VF) represents a virtualized instance of the device that can be assigned to different partitions - ADI (Assignable Device Interface) and its equivalents - With technologies such as Intel Scalable IOV, a virtual device (VDEV) composed by host OS utilizing one or more ADIs. Or its equivalent like SF (Sub function) from Mellanox. >From a driver's perspective, depends on how and where the DMA translation is done, vDPA devices are split into two types: - Platform specific DMA translation - From the driver's perspective, the device can be used on a platform where device access to data in memory is limited and/or translated. An example is a PCIE vDPA whose DMA request was tagged via a bus (e.g PCIE) specific way. DMA translation and protection are done at PCIE bus IOMMU level. - Device specific DMA translation - The device implements DMA isolation and protection through its own logic. An example is a vDPA device which uses on-chip IOMMU. To hide the differences and complexity of the above types for a vDPA device/IOMMU options and in order to present a generic virtio device to the upper layer, a device agnostic framework is required. This patch introduces a software vDPA bus which abstracts the common attributes of vDPA device, vDPA bus driver and the communication method (vdpa_config_ops) between the vDPA device abstraction and the vDPA bus driver. This allows multiple types of drivers to be used for vDPA device like the virtio_vdpa and vhost_vdpa driver to operate on the bus and allow vDPA device could be used by either kernel virtio driver or userspace vhost drivers as: virtio drivers vhost drivers | | [virtio bus] [vhost uAPI] | | virtio device vhost device virtio_vdpa drv vhost_vdpa drv \ / [vDPA bus] | vDPA device hardware drv | [hardware bus] | vDPA hardware With the abstraction of vDPA bus and vDPA bus operations, the difference and complexity of the under layer hardware is hidden from upper layer. The vDPA bus drivers on top can use a unified vdpa_config_ops to control different types of vDPA device. Signed-off-by: Jason Wang <jasowang@redhat.com> Link: https://lore.kernel.org/r/20200326140125.19794-6-jasowang@redhat.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-03-26 14:01:21 +00:00
*
* Driver should use vdpa_alloc_device() wrapper macro instead of
vDPA: introduce vDPA bus vDPA device is a device that uses a datapath which complies with the virtio specifications with vendor specific control path. vDPA devices can be both physically located on the hardware or emulated by software. vDPA hardware devices are usually implemented through PCIE with the following types: - PF (Physical Function) - A single Physical Function - VF (Virtual Function) - Device that supports single root I/O virtualization (SR-IOV). Its Virtual Function (VF) represents a virtualized instance of the device that can be assigned to different partitions - ADI (Assignable Device Interface) and its equivalents - With technologies such as Intel Scalable IOV, a virtual device (VDEV) composed by host OS utilizing one or more ADIs. Or its equivalent like SF (Sub function) from Mellanox. >From a driver's perspective, depends on how and where the DMA translation is done, vDPA devices are split into two types: - Platform specific DMA translation - From the driver's perspective, the device can be used on a platform where device access to data in memory is limited and/or translated. An example is a PCIE vDPA whose DMA request was tagged via a bus (e.g PCIE) specific way. DMA translation and protection are done at PCIE bus IOMMU level. - Device specific DMA translation - The device implements DMA isolation and protection through its own logic. An example is a vDPA device which uses on-chip IOMMU. To hide the differences and complexity of the above types for a vDPA device/IOMMU options and in order to present a generic virtio device to the upper layer, a device agnostic framework is required. This patch introduces a software vDPA bus which abstracts the common attributes of vDPA device, vDPA bus driver and the communication method (vdpa_config_ops) between the vDPA device abstraction and the vDPA bus driver. This allows multiple types of drivers to be used for vDPA device like the virtio_vdpa and vhost_vdpa driver to operate on the bus and allow vDPA device could be used by either kernel virtio driver or userspace vhost drivers as: virtio drivers vhost drivers | | [virtio bus] [vhost uAPI] | | virtio device vhost device virtio_vdpa drv vhost_vdpa drv \ / [vDPA bus] | vDPA device hardware drv | [hardware bus] | vDPA hardware With the abstraction of vDPA bus and vDPA bus operations, the difference and complexity of the under layer hardware is hidden from upper layer. The vDPA bus drivers on top can use a unified vdpa_config_ops to control different types of vDPA device. Signed-off-by: Jason Wang <jasowang@redhat.com> Link: https://lore.kernel.org/r/20200326140125.19794-6-jasowang@redhat.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-03-26 14:01:21 +00:00
* using this directly.
*
vdpa: Follow kdoc comment style Follow comment style mentioned in the Writing kernel-doc document [1]. Following warnings are fixed. $ scripts/kernel-doc -v -none drivers/vdpa/vdpa.c drivers/vdpa/vdpa.c:67: info: Scanning doc for __vdpa_alloc_device drivers/vdpa/vdpa.c:84: warning: No description found for return value of '__vdpa_alloc_device' drivers/vdpa/vdpa.c:153: info: Scanning doc for _vdpa_register_device drivers/vdpa/vdpa.c:163: warning: No description found for return value of '_vdpa_register_device' drivers/vdpa/vdpa.c:172: info: Scanning doc for vdpa_register_device drivers/vdpa/vdpa.c:180: warning: No description found for return value of 'vdpa_register_device' drivers/vdpa/vdpa.c:191: info: Scanning doc for _vdpa_unregister_device drivers/vdpa/vdpa.c:205: info: Scanning doc for vdpa_unregister_device drivers/vdpa/vdpa.c:217: info: Scanning doc for __vdpa_register_driver drivers/vdpa/vdpa.c:224: warning: No description found for return value of '__vdpa_register_driver' drivers/vdpa/vdpa.c:233: info: Scanning doc for vdpa_unregister_driver drivers/vdpa/vdpa.c:243: info: Scanning doc for vdpa_mgmtdev_register drivers/vdpa/vdpa.c:250: warning: No description found for return value of 'vdpa_mgmtdev_register' After the fix: scripts/kernel-doc -v -none drivers/vdpa/vdpa.c drivers/vdpa/vdpa.c:67: info: Scanning doc for __vdpa_alloc_device drivers/vdpa/vdpa.c:153: info: Scanning doc for _vdpa_register_device drivers/vdpa/vdpa.c:172: info: Scanning doc for vdpa_register_device drivers/vdpa/vdpa.c:191: info: Scanning doc for _vdpa_unregister_device drivers/vdpa/vdpa.c:205: info: Scanning doc for vdpa_unregister_device drivers/vdpa/vdpa.c:217: info: Scanning doc for __vdpa_register_driver drivers/vdpa/vdpa.c:233: info: Scanning doc for vdpa_unregister_driver drivers/vdpa/vdpa.c:243: info: Scanning doc for vdpa_mgmtdev_register [1] https://www.kernel.org/doc/html/latest/doc-guide/kernel-doc.html Signed-off-by: Parav Pandit <parav@nvidia.com> Reviewed-by: Eli Cohen <elic@nvidia.com> Link: https://lore.kernel.org/r/20210406170457.98481-3-parav@nvidia.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-04-06 17:04:45 +00:00
* Return: Returns an error when parent/config/dma_dev is not set or fail to get
* ida.
vDPA: introduce vDPA bus vDPA device is a device that uses a datapath which complies with the virtio specifications with vendor specific control path. vDPA devices can be both physically located on the hardware or emulated by software. vDPA hardware devices are usually implemented through PCIE with the following types: - PF (Physical Function) - A single Physical Function - VF (Virtual Function) - Device that supports single root I/O virtualization (SR-IOV). Its Virtual Function (VF) represents a virtualized instance of the device that can be assigned to different partitions - ADI (Assignable Device Interface) and its equivalents - With technologies such as Intel Scalable IOV, a virtual device (VDEV) composed by host OS utilizing one or more ADIs. Or its equivalent like SF (Sub function) from Mellanox. >From a driver's perspective, depends on how and where the DMA translation is done, vDPA devices are split into two types: - Platform specific DMA translation - From the driver's perspective, the device can be used on a platform where device access to data in memory is limited and/or translated. An example is a PCIE vDPA whose DMA request was tagged via a bus (e.g PCIE) specific way. DMA translation and protection are done at PCIE bus IOMMU level. - Device specific DMA translation - The device implements DMA isolation and protection through its own logic. An example is a vDPA device which uses on-chip IOMMU. To hide the differences and complexity of the above types for a vDPA device/IOMMU options and in order to present a generic virtio device to the upper layer, a device agnostic framework is required. This patch introduces a software vDPA bus which abstracts the common attributes of vDPA device, vDPA bus driver and the communication method (vdpa_config_ops) between the vDPA device abstraction and the vDPA bus driver. This allows multiple types of drivers to be used for vDPA device like the virtio_vdpa and vhost_vdpa driver to operate on the bus and allow vDPA device could be used by either kernel virtio driver or userspace vhost drivers as: virtio drivers vhost drivers | | [virtio bus] [vhost uAPI] | | virtio device vhost device virtio_vdpa drv vhost_vdpa drv \ / [vDPA bus] | vDPA device hardware drv | [hardware bus] | vDPA hardware With the abstraction of vDPA bus and vDPA bus operations, the difference and complexity of the under layer hardware is hidden from upper layer. The vDPA bus drivers on top can use a unified vdpa_config_ops to control different types of vDPA device. Signed-off-by: Jason Wang <jasowang@redhat.com> Link: https://lore.kernel.org/r/20200326140125.19794-6-jasowang@redhat.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-03-26 14:01:21 +00:00
*/
struct vdpa_device *__vdpa_alloc_device(struct device *parent,
const struct vdpa_config_ops *config,
unsigned int ngroups, unsigned int nas,
size_t size, const char *name,
bool use_va)
vDPA: introduce vDPA bus vDPA device is a device that uses a datapath which complies with the virtio specifications with vendor specific control path. vDPA devices can be both physically located on the hardware or emulated by software. vDPA hardware devices are usually implemented through PCIE with the following types: - PF (Physical Function) - A single Physical Function - VF (Virtual Function) - Device that supports single root I/O virtualization (SR-IOV). Its Virtual Function (VF) represents a virtualized instance of the device that can be assigned to different partitions - ADI (Assignable Device Interface) and its equivalents - With technologies such as Intel Scalable IOV, a virtual device (VDEV) composed by host OS utilizing one or more ADIs. Or its equivalent like SF (Sub function) from Mellanox. >From a driver's perspective, depends on how and where the DMA translation is done, vDPA devices are split into two types: - Platform specific DMA translation - From the driver's perspective, the device can be used on a platform where device access to data in memory is limited and/or translated. An example is a PCIE vDPA whose DMA request was tagged via a bus (e.g PCIE) specific way. DMA translation and protection are done at PCIE bus IOMMU level. - Device specific DMA translation - The device implements DMA isolation and protection through its own logic. An example is a vDPA device which uses on-chip IOMMU. To hide the differences and complexity of the above types for a vDPA device/IOMMU options and in order to present a generic virtio device to the upper layer, a device agnostic framework is required. This patch introduces a software vDPA bus which abstracts the common attributes of vDPA device, vDPA bus driver and the communication method (vdpa_config_ops) between the vDPA device abstraction and the vDPA bus driver. This allows multiple types of drivers to be used for vDPA device like the virtio_vdpa and vhost_vdpa driver to operate on the bus and allow vDPA device could be used by either kernel virtio driver or userspace vhost drivers as: virtio drivers vhost drivers | | [virtio bus] [vhost uAPI] | | virtio device vhost device virtio_vdpa drv vhost_vdpa drv \ / [vDPA bus] | vDPA device hardware drv | [hardware bus] | vDPA hardware With the abstraction of vDPA bus and vDPA bus operations, the difference and complexity of the under layer hardware is hidden from upper layer. The vDPA bus drivers on top can use a unified vdpa_config_ops to control different types of vDPA device. Signed-off-by: Jason Wang <jasowang@redhat.com> Link: https://lore.kernel.org/r/20200326140125.19794-6-jasowang@redhat.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-03-26 14:01:21 +00:00
{
struct vdpa_device *vdev;
int err = -EINVAL;
if (!config)
goto err;
if (!!config->dma_map != !!config->dma_unmap)
goto err;
/* It should only work for the device that use on-chip IOMMU */
if (use_va && !(config->dma_map || config->set_map))
goto err;
vDPA: introduce vDPA bus vDPA device is a device that uses a datapath which complies with the virtio specifications with vendor specific control path. vDPA devices can be both physically located on the hardware or emulated by software. vDPA hardware devices are usually implemented through PCIE with the following types: - PF (Physical Function) - A single Physical Function - VF (Virtual Function) - Device that supports single root I/O virtualization (SR-IOV). Its Virtual Function (VF) represents a virtualized instance of the device that can be assigned to different partitions - ADI (Assignable Device Interface) and its equivalents - With technologies such as Intel Scalable IOV, a virtual device (VDEV) composed by host OS utilizing one or more ADIs. Or its equivalent like SF (Sub function) from Mellanox. >From a driver's perspective, depends on how and where the DMA translation is done, vDPA devices are split into two types: - Platform specific DMA translation - From the driver's perspective, the device can be used on a platform where device access to data in memory is limited and/or translated. An example is a PCIE vDPA whose DMA request was tagged via a bus (e.g PCIE) specific way. DMA translation and protection are done at PCIE bus IOMMU level. - Device specific DMA translation - The device implements DMA isolation and protection through its own logic. An example is a vDPA device which uses on-chip IOMMU. To hide the differences and complexity of the above types for a vDPA device/IOMMU options and in order to present a generic virtio device to the upper layer, a device agnostic framework is required. This patch introduces a software vDPA bus which abstracts the common attributes of vDPA device, vDPA bus driver and the communication method (vdpa_config_ops) between the vDPA device abstraction and the vDPA bus driver. This allows multiple types of drivers to be used for vDPA device like the virtio_vdpa and vhost_vdpa driver to operate on the bus and allow vDPA device could be used by either kernel virtio driver or userspace vhost drivers as: virtio drivers vhost drivers | | [virtio bus] [vhost uAPI] | | virtio device vhost device virtio_vdpa drv vhost_vdpa drv \ / [vDPA bus] | vDPA device hardware drv | [hardware bus] | vDPA hardware With the abstraction of vDPA bus and vDPA bus operations, the difference and complexity of the under layer hardware is hidden from upper layer. The vDPA bus drivers on top can use a unified vdpa_config_ops to control different types of vDPA device. Signed-off-by: Jason Wang <jasowang@redhat.com> Link: https://lore.kernel.org/r/20200326140125.19794-6-jasowang@redhat.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-03-26 14:01:21 +00:00
err = -ENOMEM;
vdev = kzalloc(size, GFP_KERNEL);
if (!vdev)
goto err;
err = ida_alloc(&vdpa_index_ida, GFP_KERNEL);
vDPA: introduce vDPA bus vDPA device is a device that uses a datapath which complies with the virtio specifications with vendor specific control path. vDPA devices can be both physically located on the hardware or emulated by software. vDPA hardware devices are usually implemented through PCIE with the following types: - PF (Physical Function) - A single Physical Function - VF (Virtual Function) - Device that supports single root I/O virtualization (SR-IOV). Its Virtual Function (VF) represents a virtualized instance of the device that can be assigned to different partitions - ADI (Assignable Device Interface) and its equivalents - With technologies such as Intel Scalable IOV, a virtual device (VDEV) composed by host OS utilizing one or more ADIs. Or its equivalent like SF (Sub function) from Mellanox. >From a driver's perspective, depends on how and where the DMA translation is done, vDPA devices are split into two types: - Platform specific DMA translation - From the driver's perspective, the device can be used on a platform where device access to data in memory is limited and/or translated. An example is a PCIE vDPA whose DMA request was tagged via a bus (e.g PCIE) specific way. DMA translation and protection are done at PCIE bus IOMMU level. - Device specific DMA translation - The device implements DMA isolation and protection through its own logic. An example is a vDPA device which uses on-chip IOMMU. To hide the differences and complexity of the above types for a vDPA device/IOMMU options and in order to present a generic virtio device to the upper layer, a device agnostic framework is required. This patch introduces a software vDPA bus which abstracts the common attributes of vDPA device, vDPA bus driver and the communication method (vdpa_config_ops) between the vDPA device abstraction and the vDPA bus driver. This allows multiple types of drivers to be used for vDPA device like the virtio_vdpa and vhost_vdpa driver to operate on the bus and allow vDPA device could be used by either kernel virtio driver or userspace vhost drivers as: virtio drivers vhost drivers | | [virtio bus] [vhost uAPI] | | virtio device vhost device virtio_vdpa drv vhost_vdpa drv \ / [vDPA bus] | vDPA device hardware drv | [hardware bus] | vDPA hardware With the abstraction of vDPA bus and vDPA bus operations, the difference and complexity of the under layer hardware is hidden from upper layer. The vDPA bus drivers on top can use a unified vdpa_config_ops to control different types of vDPA device. Signed-off-by: Jason Wang <jasowang@redhat.com> Link: https://lore.kernel.org/r/20200326140125.19794-6-jasowang@redhat.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-03-26 14:01:21 +00:00
if (err < 0)
goto err_ida;
vdev->dev.bus = &vdpa_bus;
vdev->dev.parent = parent;
vdev->dev.release = vdpa_release_dev;
vdev->index = err;
vdev->config = config;
vdev->features_valid = false;
vdev->use_va = use_va;
vdev->ngroups = ngroups;
vdev->nas = nas;
vDPA: introduce vDPA bus vDPA device is a device that uses a datapath which complies with the virtio specifications with vendor specific control path. vDPA devices can be both physically located on the hardware or emulated by software. vDPA hardware devices are usually implemented through PCIE with the following types: - PF (Physical Function) - A single Physical Function - VF (Virtual Function) - Device that supports single root I/O virtualization (SR-IOV). Its Virtual Function (VF) represents a virtualized instance of the device that can be assigned to different partitions - ADI (Assignable Device Interface) and its equivalents - With technologies such as Intel Scalable IOV, a virtual device (VDEV) composed by host OS utilizing one or more ADIs. Or its equivalent like SF (Sub function) from Mellanox. >From a driver's perspective, depends on how and where the DMA translation is done, vDPA devices are split into two types: - Platform specific DMA translation - From the driver's perspective, the device can be used on a platform where device access to data in memory is limited and/or translated. An example is a PCIE vDPA whose DMA request was tagged via a bus (e.g PCIE) specific way. DMA translation and protection are done at PCIE bus IOMMU level. - Device specific DMA translation - The device implements DMA isolation and protection through its own logic. An example is a vDPA device which uses on-chip IOMMU. To hide the differences and complexity of the above types for a vDPA device/IOMMU options and in order to present a generic virtio device to the upper layer, a device agnostic framework is required. This patch introduces a software vDPA bus which abstracts the common attributes of vDPA device, vDPA bus driver and the communication method (vdpa_config_ops) between the vDPA device abstraction and the vDPA bus driver. This allows multiple types of drivers to be used for vDPA device like the virtio_vdpa and vhost_vdpa driver to operate on the bus and allow vDPA device could be used by either kernel virtio driver or userspace vhost drivers as: virtio drivers vhost drivers | | [virtio bus] [vhost uAPI] | | virtio device vhost device virtio_vdpa drv vhost_vdpa drv \ / [vDPA bus] | vDPA device hardware drv | [hardware bus] | vDPA hardware With the abstraction of vDPA bus and vDPA bus operations, the difference and complexity of the under layer hardware is hidden from upper layer. The vDPA bus drivers on top can use a unified vdpa_config_ops to control different types of vDPA device. Signed-off-by: Jason Wang <jasowang@redhat.com> Link: https://lore.kernel.org/r/20200326140125.19794-6-jasowang@redhat.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-03-26 14:01:21 +00:00
if (name)
err = dev_set_name(&vdev->dev, "%s", name);
else
err = dev_set_name(&vdev->dev, "vdpa%u", vdev->index);
vDPA: introduce vDPA bus vDPA device is a device that uses a datapath which complies with the virtio specifications with vendor specific control path. vDPA devices can be both physically located on the hardware or emulated by software. vDPA hardware devices are usually implemented through PCIE with the following types: - PF (Physical Function) - A single Physical Function - VF (Virtual Function) - Device that supports single root I/O virtualization (SR-IOV). Its Virtual Function (VF) represents a virtualized instance of the device that can be assigned to different partitions - ADI (Assignable Device Interface) and its equivalents - With technologies such as Intel Scalable IOV, a virtual device (VDEV) composed by host OS utilizing one or more ADIs. Or its equivalent like SF (Sub function) from Mellanox. >From a driver's perspective, depends on how and where the DMA translation is done, vDPA devices are split into two types: - Platform specific DMA translation - From the driver's perspective, the device can be used on a platform where device access to data in memory is limited and/or translated. An example is a PCIE vDPA whose DMA request was tagged via a bus (e.g PCIE) specific way. DMA translation and protection are done at PCIE bus IOMMU level. - Device specific DMA translation - The device implements DMA isolation and protection through its own logic. An example is a vDPA device which uses on-chip IOMMU. To hide the differences and complexity of the above types for a vDPA device/IOMMU options and in order to present a generic virtio device to the upper layer, a device agnostic framework is required. This patch introduces a software vDPA bus which abstracts the common attributes of vDPA device, vDPA bus driver and the communication method (vdpa_config_ops) between the vDPA device abstraction and the vDPA bus driver. This allows multiple types of drivers to be used for vDPA device like the virtio_vdpa and vhost_vdpa driver to operate on the bus and allow vDPA device could be used by either kernel virtio driver or userspace vhost drivers as: virtio drivers vhost drivers | | [virtio bus] [vhost uAPI] | | virtio device vhost device virtio_vdpa drv vhost_vdpa drv \ / [vDPA bus] | vDPA device hardware drv | [hardware bus] | vDPA hardware With the abstraction of vDPA bus and vDPA bus operations, the difference and complexity of the under layer hardware is hidden from upper layer. The vDPA bus drivers on top can use a unified vdpa_config_ops to control different types of vDPA device. Signed-off-by: Jason Wang <jasowang@redhat.com> Link: https://lore.kernel.org/r/20200326140125.19794-6-jasowang@redhat.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-03-26 14:01:21 +00:00
if (err)
goto err_name;
init_rwsem(&vdev->cf_lock);
vDPA: introduce vDPA bus vDPA device is a device that uses a datapath which complies with the virtio specifications with vendor specific control path. vDPA devices can be both physically located on the hardware or emulated by software. vDPA hardware devices are usually implemented through PCIE with the following types: - PF (Physical Function) - A single Physical Function - VF (Virtual Function) - Device that supports single root I/O virtualization (SR-IOV). Its Virtual Function (VF) represents a virtualized instance of the device that can be assigned to different partitions - ADI (Assignable Device Interface) and its equivalents - With technologies such as Intel Scalable IOV, a virtual device (VDEV) composed by host OS utilizing one or more ADIs. Or its equivalent like SF (Sub function) from Mellanox. >From a driver's perspective, depends on how and where the DMA translation is done, vDPA devices are split into two types: - Platform specific DMA translation - From the driver's perspective, the device can be used on a platform where device access to data in memory is limited and/or translated. An example is a PCIE vDPA whose DMA request was tagged via a bus (e.g PCIE) specific way. DMA translation and protection are done at PCIE bus IOMMU level. - Device specific DMA translation - The device implements DMA isolation and protection through its own logic. An example is a vDPA device which uses on-chip IOMMU. To hide the differences and complexity of the above types for a vDPA device/IOMMU options and in order to present a generic virtio device to the upper layer, a device agnostic framework is required. This patch introduces a software vDPA bus which abstracts the common attributes of vDPA device, vDPA bus driver and the communication method (vdpa_config_ops) between the vDPA device abstraction and the vDPA bus driver. This allows multiple types of drivers to be used for vDPA device like the virtio_vdpa and vhost_vdpa driver to operate on the bus and allow vDPA device could be used by either kernel virtio driver or userspace vhost drivers as: virtio drivers vhost drivers | | [virtio bus] [vhost uAPI] | | virtio device vhost device virtio_vdpa drv vhost_vdpa drv \ / [vDPA bus] | vDPA device hardware drv | [hardware bus] | vDPA hardware With the abstraction of vDPA bus and vDPA bus operations, the difference and complexity of the under layer hardware is hidden from upper layer. The vDPA bus drivers on top can use a unified vdpa_config_ops to control different types of vDPA device. Signed-off-by: Jason Wang <jasowang@redhat.com> Link: https://lore.kernel.org/r/20200326140125.19794-6-jasowang@redhat.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-03-26 14:01:21 +00:00
device_initialize(&vdev->dev);
return vdev;
err_name:
ida_simple_remove(&vdpa_index_ida, vdev->index);
err_ida:
kfree(vdev);
err:
return ERR_PTR(err);
}
EXPORT_SYMBOL_GPL(__vdpa_alloc_device);
static int vdpa_name_match(struct device *dev, const void *data)
{
struct vdpa_device *vdev = container_of(dev, struct vdpa_device, dev);
return (strcmp(dev_name(&vdev->dev), data) == 0);
}
static int __vdpa_register_device(struct vdpa_device *vdev, u32 nvqs)
{
struct device *dev;
vdev->nvqs = nvqs;
lockdep_assert_held(&vdpa_dev_lock);
dev = bus_find_device(&vdpa_bus, NULL, dev_name(&vdev->dev), vdpa_name_match);
if (dev) {
put_device(dev);
return -EEXIST;
}
return device_add(&vdev->dev);
}
/**
* _vdpa_register_device - register a vDPA device with vdpa lock held
* Caller must have a succeed call of vdpa_alloc_device() before.
* Caller must invoke this routine in the management device dev_add()
* callback after setting up valid mgmtdev for this vdpa device.
* @vdev: the vdpa device to be registered to vDPA bus
* @nvqs: number of virtqueues supported by this device
*
vdpa: Follow kdoc comment style Follow comment style mentioned in the Writing kernel-doc document [1]. Following warnings are fixed. $ scripts/kernel-doc -v -none drivers/vdpa/vdpa.c drivers/vdpa/vdpa.c:67: info: Scanning doc for __vdpa_alloc_device drivers/vdpa/vdpa.c:84: warning: No description found for return value of '__vdpa_alloc_device' drivers/vdpa/vdpa.c:153: info: Scanning doc for _vdpa_register_device drivers/vdpa/vdpa.c:163: warning: No description found for return value of '_vdpa_register_device' drivers/vdpa/vdpa.c:172: info: Scanning doc for vdpa_register_device drivers/vdpa/vdpa.c:180: warning: No description found for return value of 'vdpa_register_device' drivers/vdpa/vdpa.c:191: info: Scanning doc for _vdpa_unregister_device drivers/vdpa/vdpa.c:205: info: Scanning doc for vdpa_unregister_device drivers/vdpa/vdpa.c:217: info: Scanning doc for __vdpa_register_driver drivers/vdpa/vdpa.c:224: warning: No description found for return value of '__vdpa_register_driver' drivers/vdpa/vdpa.c:233: info: Scanning doc for vdpa_unregister_driver drivers/vdpa/vdpa.c:243: info: Scanning doc for vdpa_mgmtdev_register drivers/vdpa/vdpa.c:250: warning: No description found for return value of 'vdpa_mgmtdev_register' After the fix: scripts/kernel-doc -v -none drivers/vdpa/vdpa.c drivers/vdpa/vdpa.c:67: info: Scanning doc for __vdpa_alloc_device drivers/vdpa/vdpa.c:153: info: Scanning doc for _vdpa_register_device drivers/vdpa/vdpa.c:172: info: Scanning doc for vdpa_register_device drivers/vdpa/vdpa.c:191: info: Scanning doc for _vdpa_unregister_device drivers/vdpa/vdpa.c:205: info: Scanning doc for vdpa_unregister_device drivers/vdpa/vdpa.c:217: info: Scanning doc for __vdpa_register_driver drivers/vdpa/vdpa.c:233: info: Scanning doc for vdpa_unregister_driver drivers/vdpa/vdpa.c:243: info: Scanning doc for vdpa_mgmtdev_register [1] https://www.kernel.org/doc/html/latest/doc-guide/kernel-doc.html Signed-off-by: Parav Pandit <parav@nvidia.com> Reviewed-by: Eli Cohen <elic@nvidia.com> Link: https://lore.kernel.org/r/20210406170457.98481-3-parav@nvidia.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-04-06 17:04:45 +00:00
* Return: Returns an error when fail to add device to vDPA bus
*/
int _vdpa_register_device(struct vdpa_device *vdev, u32 nvqs)
{
if (!vdev->mdev)
return -EINVAL;
return __vdpa_register_device(vdev, nvqs);
}
EXPORT_SYMBOL_GPL(_vdpa_register_device);
vDPA: introduce vDPA bus vDPA device is a device that uses a datapath which complies with the virtio specifications with vendor specific control path. vDPA devices can be both physically located on the hardware or emulated by software. vDPA hardware devices are usually implemented through PCIE with the following types: - PF (Physical Function) - A single Physical Function - VF (Virtual Function) - Device that supports single root I/O virtualization (SR-IOV). Its Virtual Function (VF) represents a virtualized instance of the device that can be assigned to different partitions - ADI (Assignable Device Interface) and its equivalents - With technologies such as Intel Scalable IOV, a virtual device (VDEV) composed by host OS utilizing one or more ADIs. Or its equivalent like SF (Sub function) from Mellanox. >From a driver's perspective, depends on how and where the DMA translation is done, vDPA devices are split into two types: - Platform specific DMA translation - From the driver's perspective, the device can be used on a platform where device access to data in memory is limited and/or translated. An example is a PCIE vDPA whose DMA request was tagged via a bus (e.g PCIE) specific way. DMA translation and protection are done at PCIE bus IOMMU level. - Device specific DMA translation - The device implements DMA isolation and protection through its own logic. An example is a vDPA device which uses on-chip IOMMU. To hide the differences and complexity of the above types for a vDPA device/IOMMU options and in order to present a generic virtio device to the upper layer, a device agnostic framework is required. This patch introduces a software vDPA bus which abstracts the common attributes of vDPA device, vDPA bus driver and the communication method (vdpa_config_ops) between the vDPA device abstraction and the vDPA bus driver. This allows multiple types of drivers to be used for vDPA device like the virtio_vdpa and vhost_vdpa driver to operate on the bus and allow vDPA device could be used by either kernel virtio driver or userspace vhost drivers as: virtio drivers vhost drivers | | [virtio bus] [vhost uAPI] | | virtio device vhost device virtio_vdpa drv vhost_vdpa drv \ / [vDPA bus] | vDPA device hardware drv | [hardware bus] | vDPA hardware With the abstraction of vDPA bus and vDPA bus operations, the difference and complexity of the under layer hardware is hidden from upper layer. The vDPA bus drivers on top can use a unified vdpa_config_ops to control different types of vDPA device. Signed-off-by: Jason Wang <jasowang@redhat.com> Link: https://lore.kernel.org/r/20200326140125.19794-6-jasowang@redhat.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-03-26 14:01:21 +00:00
/**
* vdpa_register_device - register a vDPA device
* Callers must have a succeed call of vdpa_alloc_device() before.
vDPA: introduce vDPA bus vDPA device is a device that uses a datapath which complies with the virtio specifications with vendor specific control path. vDPA devices can be both physically located on the hardware or emulated by software. vDPA hardware devices are usually implemented through PCIE with the following types: - PF (Physical Function) - A single Physical Function - VF (Virtual Function) - Device that supports single root I/O virtualization (SR-IOV). Its Virtual Function (VF) represents a virtualized instance of the device that can be assigned to different partitions - ADI (Assignable Device Interface) and its equivalents - With technologies such as Intel Scalable IOV, a virtual device (VDEV) composed by host OS utilizing one or more ADIs. Or its equivalent like SF (Sub function) from Mellanox. >From a driver's perspective, depends on how and where the DMA translation is done, vDPA devices are split into two types: - Platform specific DMA translation - From the driver's perspective, the device can be used on a platform where device access to data in memory is limited and/or translated. An example is a PCIE vDPA whose DMA request was tagged via a bus (e.g PCIE) specific way. DMA translation and protection are done at PCIE bus IOMMU level. - Device specific DMA translation - The device implements DMA isolation and protection through its own logic. An example is a vDPA device which uses on-chip IOMMU. To hide the differences and complexity of the above types for a vDPA device/IOMMU options and in order to present a generic virtio device to the upper layer, a device agnostic framework is required. This patch introduces a software vDPA bus which abstracts the common attributes of vDPA device, vDPA bus driver and the communication method (vdpa_config_ops) between the vDPA device abstraction and the vDPA bus driver. This allows multiple types of drivers to be used for vDPA device like the virtio_vdpa and vhost_vdpa driver to operate on the bus and allow vDPA device could be used by either kernel virtio driver or userspace vhost drivers as: virtio drivers vhost drivers | | [virtio bus] [vhost uAPI] | | virtio device vhost device virtio_vdpa drv vhost_vdpa drv \ / [vDPA bus] | vDPA device hardware drv | [hardware bus] | vDPA hardware With the abstraction of vDPA bus and vDPA bus operations, the difference and complexity of the under layer hardware is hidden from upper layer. The vDPA bus drivers on top can use a unified vdpa_config_ops to control different types of vDPA device. Signed-off-by: Jason Wang <jasowang@redhat.com> Link: https://lore.kernel.org/r/20200326140125.19794-6-jasowang@redhat.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-03-26 14:01:21 +00:00
* @vdev: the vdpa device to be registered to vDPA bus
* @nvqs: number of virtqueues supported by this device
vDPA: introduce vDPA bus vDPA device is a device that uses a datapath which complies with the virtio specifications with vendor specific control path. vDPA devices can be both physically located on the hardware or emulated by software. vDPA hardware devices are usually implemented through PCIE with the following types: - PF (Physical Function) - A single Physical Function - VF (Virtual Function) - Device that supports single root I/O virtualization (SR-IOV). Its Virtual Function (VF) represents a virtualized instance of the device that can be assigned to different partitions - ADI (Assignable Device Interface) and its equivalents - With technologies such as Intel Scalable IOV, a virtual device (VDEV) composed by host OS utilizing one or more ADIs. Or its equivalent like SF (Sub function) from Mellanox. >From a driver's perspective, depends on how and where the DMA translation is done, vDPA devices are split into two types: - Platform specific DMA translation - From the driver's perspective, the device can be used on a platform where device access to data in memory is limited and/or translated. An example is a PCIE vDPA whose DMA request was tagged via a bus (e.g PCIE) specific way. DMA translation and protection are done at PCIE bus IOMMU level. - Device specific DMA translation - The device implements DMA isolation and protection through its own logic. An example is a vDPA device which uses on-chip IOMMU. To hide the differences and complexity of the above types for a vDPA device/IOMMU options and in order to present a generic virtio device to the upper layer, a device agnostic framework is required. This patch introduces a software vDPA bus which abstracts the common attributes of vDPA device, vDPA bus driver and the communication method (vdpa_config_ops) between the vDPA device abstraction and the vDPA bus driver. This allows multiple types of drivers to be used for vDPA device like the virtio_vdpa and vhost_vdpa driver to operate on the bus and allow vDPA device could be used by either kernel virtio driver or userspace vhost drivers as: virtio drivers vhost drivers | | [virtio bus] [vhost uAPI] | | virtio device vhost device virtio_vdpa drv vhost_vdpa drv \ / [vDPA bus] | vDPA device hardware drv | [hardware bus] | vDPA hardware With the abstraction of vDPA bus and vDPA bus operations, the difference and complexity of the under layer hardware is hidden from upper layer. The vDPA bus drivers on top can use a unified vdpa_config_ops to control different types of vDPA device. Signed-off-by: Jason Wang <jasowang@redhat.com> Link: https://lore.kernel.org/r/20200326140125.19794-6-jasowang@redhat.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-03-26 14:01:21 +00:00
*
vdpa: Follow kdoc comment style Follow comment style mentioned in the Writing kernel-doc document [1]. Following warnings are fixed. $ scripts/kernel-doc -v -none drivers/vdpa/vdpa.c drivers/vdpa/vdpa.c:67: info: Scanning doc for __vdpa_alloc_device drivers/vdpa/vdpa.c:84: warning: No description found for return value of '__vdpa_alloc_device' drivers/vdpa/vdpa.c:153: info: Scanning doc for _vdpa_register_device drivers/vdpa/vdpa.c:163: warning: No description found for return value of '_vdpa_register_device' drivers/vdpa/vdpa.c:172: info: Scanning doc for vdpa_register_device drivers/vdpa/vdpa.c:180: warning: No description found for return value of 'vdpa_register_device' drivers/vdpa/vdpa.c:191: info: Scanning doc for _vdpa_unregister_device drivers/vdpa/vdpa.c:205: info: Scanning doc for vdpa_unregister_device drivers/vdpa/vdpa.c:217: info: Scanning doc for __vdpa_register_driver drivers/vdpa/vdpa.c:224: warning: No description found for return value of '__vdpa_register_driver' drivers/vdpa/vdpa.c:233: info: Scanning doc for vdpa_unregister_driver drivers/vdpa/vdpa.c:243: info: Scanning doc for vdpa_mgmtdev_register drivers/vdpa/vdpa.c:250: warning: No description found for return value of 'vdpa_mgmtdev_register' After the fix: scripts/kernel-doc -v -none drivers/vdpa/vdpa.c drivers/vdpa/vdpa.c:67: info: Scanning doc for __vdpa_alloc_device drivers/vdpa/vdpa.c:153: info: Scanning doc for _vdpa_register_device drivers/vdpa/vdpa.c:172: info: Scanning doc for vdpa_register_device drivers/vdpa/vdpa.c:191: info: Scanning doc for _vdpa_unregister_device drivers/vdpa/vdpa.c:205: info: Scanning doc for vdpa_unregister_device drivers/vdpa/vdpa.c:217: info: Scanning doc for __vdpa_register_driver drivers/vdpa/vdpa.c:233: info: Scanning doc for vdpa_unregister_driver drivers/vdpa/vdpa.c:243: info: Scanning doc for vdpa_mgmtdev_register [1] https://www.kernel.org/doc/html/latest/doc-guide/kernel-doc.html Signed-off-by: Parav Pandit <parav@nvidia.com> Reviewed-by: Eli Cohen <elic@nvidia.com> Link: https://lore.kernel.org/r/20210406170457.98481-3-parav@nvidia.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-04-06 17:04:45 +00:00
* Return: Returns an error when fail to add to vDPA bus
vDPA: introduce vDPA bus vDPA device is a device that uses a datapath which complies with the virtio specifications with vendor specific control path. vDPA devices can be both physically located on the hardware or emulated by software. vDPA hardware devices are usually implemented through PCIE with the following types: - PF (Physical Function) - A single Physical Function - VF (Virtual Function) - Device that supports single root I/O virtualization (SR-IOV). Its Virtual Function (VF) represents a virtualized instance of the device that can be assigned to different partitions - ADI (Assignable Device Interface) and its equivalents - With technologies such as Intel Scalable IOV, a virtual device (VDEV) composed by host OS utilizing one or more ADIs. Or its equivalent like SF (Sub function) from Mellanox. >From a driver's perspective, depends on how and where the DMA translation is done, vDPA devices are split into two types: - Platform specific DMA translation - From the driver's perspective, the device can be used on a platform where device access to data in memory is limited and/or translated. An example is a PCIE vDPA whose DMA request was tagged via a bus (e.g PCIE) specific way. DMA translation and protection are done at PCIE bus IOMMU level. - Device specific DMA translation - The device implements DMA isolation and protection through its own logic. An example is a vDPA device which uses on-chip IOMMU. To hide the differences and complexity of the above types for a vDPA device/IOMMU options and in order to present a generic virtio device to the upper layer, a device agnostic framework is required. This patch introduces a software vDPA bus which abstracts the common attributes of vDPA device, vDPA bus driver and the communication method (vdpa_config_ops) between the vDPA device abstraction and the vDPA bus driver. This allows multiple types of drivers to be used for vDPA device like the virtio_vdpa and vhost_vdpa driver to operate on the bus and allow vDPA device could be used by either kernel virtio driver or userspace vhost drivers as: virtio drivers vhost drivers | | [virtio bus] [vhost uAPI] | | virtio device vhost device virtio_vdpa drv vhost_vdpa drv \ / [vDPA bus] | vDPA device hardware drv | [hardware bus] | vDPA hardware With the abstraction of vDPA bus and vDPA bus operations, the difference and complexity of the under layer hardware is hidden from upper layer. The vDPA bus drivers on top can use a unified vdpa_config_ops to control different types of vDPA device. Signed-off-by: Jason Wang <jasowang@redhat.com> Link: https://lore.kernel.org/r/20200326140125.19794-6-jasowang@redhat.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-03-26 14:01:21 +00:00
*/
int vdpa_register_device(struct vdpa_device *vdev, u32 nvqs)
vDPA: introduce vDPA bus vDPA device is a device that uses a datapath which complies with the virtio specifications with vendor specific control path. vDPA devices can be both physically located on the hardware or emulated by software. vDPA hardware devices are usually implemented through PCIE with the following types: - PF (Physical Function) - A single Physical Function - VF (Virtual Function) - Device that supports single root I/O virtualization (SR-IOV). Its Virtual Function (VF) represents a virtualized instance of the device that can be assigned to different partitions - ADI (Assignable Device Interface) and its equivalents - With technologies such as Intel Scalable IOV, a virtual device (VDEV) composed by host OS utilizing one or more ADIs. Or its equivalent like SF (Sub function) from Mellanox. >From a driver's perspective, depends on how and where the DMA translation is done, vDPA devices are split into two types: - Platform specific DMA translation - From the driver's perspective, the device can be used on a platform where device access to data in memory is limited and/or translated. An example is a PCIE vDPA whose DMA request was tagged via a bus (e.g PCIE) specific way. DMA translation and protection are done at PCIE bus IOMMU level. - Device specific DMA translation - The device implements DMA isolation and protection through its own logic. An example is a vDPA device which uses on-chip IOMMU. To hide the differences and complexity of the above types for a vDPA device/IOMMU options and in order to present a generic virtio device to the upper layer, a device agnostic framework is required. This patch introduces a software vDPA bus which abstracts the common attributes of vDPA device, vDPA bus driver and the communication method (vdpa_config_ops) between the vDPA device abstraction and the vDPA bus driver. This allows multiple types of drivers to be used for vDPA device like the virtio_vdpa and vhost_vdpa driver to operate on the bus and allow vDPA device could be used by either kernel virtio driver or userspace vhost drivers as: virtio drivers vhost drivers | | [virtio bus] [vhost uAPI] | | virtio device vhost device virtio_vdpa drv vhost_vdpa drv \ / [vDPA bus] | vDPA device hardware drv | [hardware bus] | vDPA hardware With the abstraction of vDPA bus and vDPA bus operations, the difference and complexity of the under layer hardware is hidden from upper layer. The vDPA bus drivers on top can use a unified vdpa_config_ops to control different types of vDPA device. Signed-off-by: Jason Wang <jasowang@redhat.com> Link: https://lore.kernel.org/r/20200326140125.19794-6-jasowang@redhat.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-03-26 14:01:21 +00:00
{
int err;
down_write(&vdpa_dev_lock);
err = __vdpa_register_device(vdev, nvqs);
up_write(&vdpa_dev_lock);
return err;
vDPA: introduce vDPA bus vDPA device is a device that uses a datapath which complies with the virtio specifications with vendor specific control path. vDPA devices can be both physically located on the hardware or emulated by software. vDPA hardware devices are usually implemented through PCIE with the following types: - PF (Physical Function) - A single Physical Function - VF (Virtual Function) - Device that supports single root I/O virtualization (SR-IOV). Its Virtual Function (VF) represents a virtualized instance of the device that can be assigned to different partitions - ADI (Assignable Device Interface) and its equivalents - With technologies such as Intel Scalable IOV, a virtual device (VDEV) composed by host OS utilizing one or more ADIs. Or its equivalent like SF (Sub function) from Mellanox. >From a driver's perspective, depends on how and where the DMA translation is done, vDPA devices are split into two types: - Platform specific DMA translation - From the driver's perspective, the device can be used on a platform where device access to data in memory is limited and/or translated. An example is a PCIE vDPA whose DMA request was tagged via a bus (e.g PCIE) specific way. DMA translation and protection are done at PCIE bus IOMMU level. - Device specific DMA translation - The device implements DMA isolation and protection through its own logic. An example is a vDPA device which uses on-chip IOMMU. To hide the differences and complexity of the above types for a vDPA device/IOMMU options and in order to present a generic virtio device to the upper layer, a device agnostic framework is required. This patch introduces a software vDPA bus which abstracts the common attributes of vDPA device, vDPA bus driver and the communication method (vdpa_config_ops) between the vDPA device abstraction and the vDPA bus driver. This allows multiple types of drivers to be used for vDPA device like the virtio_vdpa and vhost_vdpa driver to operate on the bus and allow vDPA device could be used by either kernel virtio driver or userspace vhost drivers as: virtio drivers vhost drivers | | [virtio bus] [vhost uAPI] | | virtio device vhost device virtio_vdpa drv vhost_vdpa drv \ / [vDPA bus] | vDPA device hardware drv | [hardware bus] | vDPA hardware With the abstraction of vDPA bus and vDPA bus operations, the difference and complexity of the under layer hardware is hidden from upper layer. The vDPA bus drivers on top can use a unified vdpa_config_ops to control different types of vDPA device. Signed-off-by: Jason Wang <jasowang@redhat.com> Link: https://lore.kernel.org/r/20200326140125.19794-6-jasowang@redhat.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-03-26 14:01:21 +00:00
}
EXPORT_SYMBOL_GPL(vdpa_register_device);
/**
* _vdpa_unregister_device - unregister a vDPA device
* Caller must invoke this routine as part of management device dev_del()
* callback.
* @vdev: the vdpa device to be unregisted from vDPA bus
*/
void _vdpa_unregister_device(struct vdpa_device *vdev)
{
lockdep_assert_held(&vdpa_dev_lock);
WARN_ON(!vdev->mdev);
device_unregister(&vdev->dev);
}
EXPORT_SYMBOL_GPL(_vdpa_unregister_device);
vDPA: introduce vDPA bus vDPA device is a device that uses a datapath which complies with the virtio specifications with vendor specific control path. vDPA devices can be both physically located on the hardware or emulated by software. vDPA hardware devices are usually implemented through PCIE with the following types: - PF (Physical Function) - A single Physical Function - VF (Virtual Function) - Device that supports single root I/O virtualization (SR-IOV). Its Virtual Function (VF) represents a virtualized instance of the device that can be assigned to different partitions - ADI (Assignable Device Interface) and its equivalents - With technologies such as Intel Scalable IOV, a virtual device (VDEV) composed by host OS utilizing one or more ADIs. Or its equivalent like SF (Sub function) from Mellanox. >From a driver's perspective, depends on how and where the DMA translation is done, vDPA devices are split into two types: - Platform specific DMA translation - From the driver's perspective, the device can be used on a platform where device access to data in memory is limited and/or translated. An example is a PCIE vDPA whose DMA request was tagged via a bus (e.g PCIE) specific way. DMA translation and protection are done at PCIE bus IOMMU level. - Device specific DMA translation - The device implements DMA isolation and protection through its own logic. An example is a vDPA device which uses on-chip IOMMU. To hide the differences and complexity of the above types for a vDPA device/IOMMU options and in order to present a generic virtio device to the upper layer, a device agnostic framework is required. This patch introduces a software vDPA bus which abstracts the common attributes of vDPA device, vDPA bus driver and the communication method (vdpa_config_ops) between the vDPA device abstraction and the vDPA bus driver. This allows multiple types of drivers to be used for vDPA device like the virtio_vdpa and vhost_vdpa driver to operate on the bus and allow vDPA device could be used by either kernel virtio driver or userspace vhost drivers as: virtio drivers vhost drivers | | [virtio bus] [vhost uAPI] | | virtio device vhost device virtio_vdpa drv vhost_vdpa drv \ / [vDPA bus] | vDPA device hardware drv | [hardware bus] | vDPA hardware With the abstraction of vDPA bus and vDPA bus operations, the difference and complexity of the under layer hardware is hidden from upper layer. The vDPA bus drivers on top can use a unified vdpa_config_ops to control different types of vDPA device. Signed-off-by: Jason Wang <jasowang@redhat.com> Link: https://lore.kernel.org/r/20200326140125.19794-6-jasowang@redhat.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-03-26 14:01:21 +00:00
/**
* vdpa_unregister_device - unregister a vDPA device
* @vdev: the vdpa device to be unregisted from vDPA bus
*/
void vdpa_unregister_device(struct vdpa_device *vdev)
{
down_write(&vdpa_dev_lock);
vDPA: introduce vDPA bus vDPA device is a device that uses a datapath which complies with the virtio specifications with vendor specific control path. vDPA devices can be both physically located on the hardware or emulated by software. vDPA hardware devices are usually implemented through PCIE with the following types: - PF (Physical Function) - A single Physical Function - VF (Virtual Function) - Device that supports single root I/O virtualization (SR-IOV). Its Virtual Function (VF) represents a virtualized instance of the device that can be assigned to different partitions - ADI (Assignable Device Interface) and its equivalents - With technologies such as Intel Scalable IOV, a virtual device (VDEV) composed by host OS utilizing one or more ADIs. Or its equivalent like SF (Sub function) from Mellanox. >From a driver's perspective, depends on how and where the DMA translation is done, vDPA devices are split into two types: - Platform specific DMA translation - From the driver's perspective, the device can be used on a platform where device access to data in memory is limited and/or translated. An example is a PCIE vDPA whose DMA request was tagged via a bus (e.g PCIE) specific way. DMA translation and protection are done at PCIE bus IOMMU level. - Device specific DMA translation - The device implements DMA isolation and protection through its own logic. An example is a vDPA device which uses on-chip IOMMU. To hide the differences and complexity of the above types for a vDPA device/IOMMU options and in order to present a generic virtio device to the upper layer, a device agnostic framework is required. This patch introduces a software vDPA bus which abstracts the common attributes of vDPA device, vDPA bus driver and the communication method (vdpa_config_ops) between the vDPA device abstraction and the vDPA bus driver. This allows multiple types of drivers to be used for vDPA device like the virtio_vdpa and vhost_vdpa driver to operate on the bus and allow vDPA device could be used by either kernel virtio driver or userspace vhost drivers as: virtio drivers vhost drivers | | [virtio bus] [vhost uAPI] | | virtio device vhost device virtio_vdpa drv vhost_vdpa drv \ / [vDPA bus] | vDPA device hardware drv | [hardware bus] | vDPA hardware With the abstraction of vDPA bus and vDPA bus operations, the difference and complexity of the under layer hardware is hidden from upper layer. The vDPA bus drivers on top can use a unified vdpa_config_ops to control different types of vDPA device. Signed-off-by: Jason Wang <jasowang@redhat.com> Link: https://lore.kernel.org/r/20200326140125.19794-6-jasowang@redhat.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-03-26 14:01:21 +00:00
device_unregister(&vdev->dev);
up_write(&vdpa_dev_lock);
vDPA: introduce vDPA bus vDPA device is a device that uses a datapath which complies with the virtio specifications with vendor specific control path. vDPA devices can be both physically located on the hardware or emulated by software. vDPA hardware devices are usually implemented through PCIE with the following types: - PF (Physical Function) - A single Physical Function - VF (Virtual Function) - Device that supports single root I/O virtualization (SR-IOV). Its Virtual Function (VF) represents a virtualized instance of the device that can be assigned to different partitions - ADI (Assignable Device Interface) and its equivalents - With technologies such as Intel Scalable IOV, a virtual device (VDEV) composed by host OS utilizing one or more ADIs. Or its equivalent like SF (Sub function) from Mellanox. >From a driver's perspective, depends on how and where the DMA translation is done, vDPA devices are split into two types: - Platform specific DMA translation - From the driver's perspective, the device can be used on a platform where device access to data in memory is limited and/or translated. An example is a PCIE vDPA whose DMA request was tagged via a bus (e.g PCIE) specific way. DMA translation and protection are done at PCIE bus IOMMU level. - Device specific DMA translation - The device implements DMA isolation and protection through its own logic. An example is a vDPA device which uses on-chip IOMMU. To hide the differences and complexity of the above types for a vDPA device/IOMMU options and in order to present a generic virtio device to the upper layer, a device agnostic framework is required. This patch introduces a software vDPA bus which abstracts the common attributes of vDPA device, vDPA bus driver and the communication method (vdpa_config_ops) between the vDPA device abstraction and the vDPA bus driver. This allows multiple types of drivers to be used for vDPA device like the virtio_vdpa and vhost_vdpa driver to operate on the bus and allow vDPA device could be used by either kernel virtio driver or userspace vhost drivers as: virtio drivers vhost drivers | | [virtio bus] [vhost uAPI] | | virtio device vhost device virtio_vdpa drv vhost_vdpa drv \ / [vDPA bus] | vDPA device hardware drv | [hardware bus] | vDPA hardware With the abstraction of vDPA bus and vDPA bus operations, the difference and complexity of the under layer hardware is hidden from upper layer. The vDPA bus drivers on top can use a unified vdpa_config_ops to control different types of vDPA device. Signed-off-by: Jason Wang <jasowang@redhat.com> Link: https://lore.kernel.org/r/20200326140125.19794-6-jasowang@redhat.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-03-26 14:01:21 +00:00
}
EXPORT_SYMBOL_GPL(vdpa_unregister_device);
/**
* __vdpa_register_driver - register a vDPA device driver
* @drv: the vdpa device driver to be registered
* @owner: module owner of the driver
*
vdpa: Follow kdoc comment style Follow comment style mentioned in the Writing kernel-doc document [1]. Following warnings are fixed. $ scripts/kernel-doc -v -none drivers/vdpa/vdpa.c drivers/vdpa/vdpa.c:67: info: Scanning doc for __vdpa_alloc_device drivers/vdpa/vdpa.c:84: warning: No description found for return value of '__vdpa_alloc_device' drivers/vdpa/vdpa.c:153: info: Scanning doc for _vdpa_register_device drivers/vdpa/vdpa.c:163: warning: No description found for return value of '_vdpa_register_device' drivers/vdpa/vdpa.c:172: info: Scanning doc for vdpa_register_device drivers/vdpa/vdpa.c:180: warning: No description found for return value of 'vdpa_register_device' drivers/vdpa/vdpa.c:191: info: Scanning doc for _vdpa_unregister_device drivers/vdpa/vdpa.c:205: info: Scanning doc for vdpa_unregister_device drivers/vdpa/vdpa.c:217: info: Scanning doc for __vdpa_register_driver drivers/vdpa/vdpa.c:224: warning: No description found for return value of '__vdpa_register_driver' drivers/vdpa/vdpa.c:233: info: Scanning doc for vdpa_unregister_driver drivers/vdpa/vdpa.c:243: info: Scanning doc for vdpa_mgmtdev_register drivers/vdpa/vdpa.c:250: warning: No description found for return value of 'vdpa_mgmtdev_register' After the fix: scripts/kernel-doc -v -none drivers/vdpa/vdpa.c drivers/vdpa/vdpa.c:67: info: Scanning doc for __vdpa_alloc_device drivers/vdpa/vdpa.c:153: info: Scanning doc for _vdpa_register_device drivers/vdpa/vdpa.c:172: info: Scanning doc for vdpa_register_device drivers/vdpa/vdpa.c:191: info: Scanning doc for _vdpa_unregister_device drivers/vdpa/vdpa.c:205: info: Scanning doc for vdpa_unregister_device drivers/vdpa/vdpa.c:217: info: Scanning doc for __vdpa_register_driver drivers/vdpa/vdpa.c:233: info: Scanning doc for vdpa_unregister_driver drivers/vdpa/vdpa.c:243: info: Scanning doc for vdpa_mgmtdev_register [1] https://www.kernel.org/doc/html/latest/doc-guide/kernel-doc.html Signed-off-by: Parav Pandit <parav@nvidia.com> Reviewed-by: Eli Cohen <elic@nvidia.com> Link: https://lore.kernel.org/r/20210406170457.98481-3-parav@nvidia.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-04-06 17:04:45 +00:00
* Return: Returns an err when fail to do the registration
vDPA: introduce vDPA bus vDPA device is a device that uses a datapath which complies with the virtio specifications with vendor specific control path. vDPA devices can be both physically located on the hardware or emulated by software. vDPA hardware devices are usually implemented through PCIE with the following types: - PF (Physical Function) - A single Physical Function - VF (Virtual Function) - Device that supports single root I/O virtualization (SR-IOV). Its Virtual Function (VF) represents a virtualized instance of the device that can be assigned to different partitions - ADI (Assignable Device Interface) and its equivalents - With technologies such as Intel Scalable IOV, a virtual device (VDEV) composed by host OS utilizing one or more ADIs. Or its equivalent like SF (Sub function) from Mellanox. >From a driver's perspective, depends on how and where the DMA translation is done, vDPA devices are split into two types: - Platform specific DMA translation - From the driver's perspective, the device can be used on a platform where device access to data in memory is limited and/or translated. An example is a PCIE vDPA whose DMA request was tagged via a bus (e.g PCIE) specific way. DMA translation and protection are done at PCIE bus IOMMU level. - Device specific DMA translation - The device implements DMA isolation and protection through its own logic. An example is a vDPA device which uses on-chip IOMMU. To hide the differences and complexity of the above types for a vDPA device/IOMMU options and in order to present a generic virtio device to the upper layer, a device agnostic framework is required. This patch introduces a software vDPA bus which abstracts the common attributes of vDPA device, vDPA bus driver and the communication method (vdpa_config_ops) between the vDPA device abstraction and the vDPA bus driver. This allows multiple types of drivers to be used for vDPA device like the virtio_vdpa and vhost_vdpa driver to operate on the bus and allow vDPA device could be used by either kernel virtio driver or userspace vhost drivers as: virtio drivers vhost drivers | | [virtio bus] [vhost uAPI] | | virtio device vhost device virtio_vdpa drv vhost_vdpa drv \ / [vDPA bus] | vDPA device hardware drv | [hardware bus] | vDPA hardware With the abstraction of vDPA bus and vDPA bus operations, the difference and complexity of the under layer hardware is hidden from upper layer. The vDPA bus drivers on top can use a unified vdpa_config_ops to control different types of vDPA device. Signed-off-by: Jason Wang <jasowang@redhat.com> Link: https://lore.kernel.org/r/20200326140125.19794-6-jasowang@redhat.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-03-26 14:01:21 +00:00
*/
int __vdpa_register_driver(struct vdpa_driver *drv, struct module *owner)
{
drv->driver.bus = &vdpa_bus;
drv->driver.owner = owner;
return driver_register(&drv->driver);
}
EXPORT_SYMBOL_GPL(__vdpa_register_driver);
/**
* vdpa_unregister_driver - unregister a vDPA device driver
* @drv: the vdpa device driver to be unregistered
*/
void vdpa_unregister_driver(struct vdpa_driver *drv)
{
driver_unregister(&drv->driver);
}
EXPORT_SYMBOL_GPL(vdpa_unregister_driver);
vdpa: Define vdpa mgmt device, ops and a netlink interface To add one or more VDPA devices, define a management device which allows adding or removing vdpa device. A management device defines set of callbacks to manage vdpa devices. To begin with, it defines add and remove callbacks through which a user defined vdpa device can be added or removed. A unique management device is identified by its unique handle identified by management device name and optionally the bus name. Hence, introduce routine through which driver can register a management device and its callback operations for adding and remove a vdpa device. Introduce vdpa netlink socket family so that user can query management device and its attributes. Example of show vdpa management device which allows creating vdpa device of networking class (device id = 0x1) of virtio specification 1.1 section 5.1.1. $ vdpa mgmtdev show vdpasim_net: supported_classes: net Example of showing vdpa management device in JSON format. $ vdpa mgmtdev show -jp { "show": { "vdpasim_net": { "supported_classes": [ "net" ] } } } Signed-off-by: Parav Pandit <parav@nvidia.com> Reviewed-by: Eli Cohen <elic@nvidia.com> Reviewed-by: Jason Wang <jasowang@redhat.com> Link: https://lore.kernel.org/r/20210105103203.82508-4-parav@nvidia.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Including a bugfix: vpda: correctly size vdpa_nl_policy We need to ensure last entry of vdpa_nl_policy[] is zero, otherwise out-of-bounds access is hurting us. Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Cc: Parav Pandit <parav@nvidia.com> Cc: Eli Cohen <elic@nvidia.com> Cc: Jason Wang <jasowang@redhat.com> Cc: Michael S. Tsirkin <mst@redhat.com> Link: https://lore.kernel.org/r/20210210134911.4119555-1-eric.dumazet@gmail.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-01-05 10:32:00 +00:00
/**
* vdpa_mgmtdev_register - register a vdpa management device
*
* @mdev: Pointer to vdpa management device
* vdpa_mgmtdev_register() register a vdpa management device which supports
* vdpa device management.
vdpa: Follow kdoc comment style Follow comment style mentioned in the Writing kernel-doc document [1]. Following warnings are fixed. $ scripts/kernel-doc -v -none drivers/vdpa/vdpa.c drivers/vdpa/vdpa.c:67: info: Scanning doc for __vdpa_alloc_device drivers/vdpa/vdpa.c:84: warning: No description found for return value of '__vdpa_alloc_device' drivers/vdpa/vdpa.c:153: info: Scanning doc for _vdpa_register_device drivers/vdpa/vdpa.c:163: warning: No description found for return value of '_vdpa_register_device' drivers/vdpa/vdpa.c:172: info: Scanning doc for vdpa_register_device drivers/vdpa/vdpa.c:180: warning: No description found for return value of 'vdpa_register_device' drivers/vdpa/vdpa.c:191: info: Scanning doc for _vdpa_unregister_device drivers/vdpa/vdpa.c:205: info: Scanning doc for vdpa_unregister_device drivers/vdpa/vdpa.c:217: info: Scanning doc for __vdpa_register_driver drivers/vdpa/vdpa.c:224: warning: No description found for return value of '__vdpa_register_driver' drivers/vdpa/vdpa.c:233: info: Scanning doc for vdpa_unregister_driver drivers/vdpa/vdpa.c:243: info: Scanning doc for vdpa_mgmtdev_register drivers/vdpa/vdpa.c:250: warning: No description found for return value of 'vdpa_mgmtdev_register' After the fix: scripts/kernel-doc -v -none drivers/vdpa/vdpa.c drivers/vdpa/vdpa.c:67: info: Scanning doc for __vdpa_alloc_device drivers/vdpa/vdpa.c:153: info: Scanning doc for _vdpa_register_device drivers/vdpa/vdpa.c:172: info: Scanning doc for vdpa_register_device drivers/vdpa/vdpa.c:191: info: Scanning doc for _vdpa_unregister_device drivers/vdpa/vdpa.c:205: info: Scanning doc for vdpa_unregister_device drivers/vdpa/vdpa.c:217: info: Scanning doc for __vdpa_register_driver drivers/vdpa/vdpa.c:233: info: Scanning doc for vdpa_unregister_driver drivers/vdpa/vdpa.c:243: info: Scanning doc for vdpa_mgmtdev_register [1] https://www.kernel.org/doc/html/latest/doc-guide/kernel-doc.html Signed-off-by: Parav Pandit <parav@nvidia.com> Reviewed-by: Eli Cohen <elic@nvidia.com> Link: https://lore.kernel.org/r/20210406170457.98481-3-parav@nvidia.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-04-06 17:04:45 +00:00
* Return: Returns 0 on success or failure when required callback ops are not
* initialized.
vdpa: Define vdpa mgmt device, ops and a netlink interface To add one or more VDPA devices, define a management device which allows adding or removing vdpa device. A management device defines set of callbacks to manage vdpa devices. To begin with, it defines add and remove callbacks through which a user defined vdpa device can be added or removed. A unique management device is identified by its unique handle identified by management device name and optionally the bus name. Hence, introduce routine through which driver can register a management device and its callback operations for adding and remove a vdpa device. Introduce vdpa netlink socket family so that user can query management device and its attributes. Example of show vdpa management device which allows creating vdpa device of networking class (device id = 0x1) of virtio specification 1.1 section 5.1.1. $ vdpa mgmtdev show vdpasim_net: supported_classes: net Example of showing vdpa management device in JSON format. $ vdpa mgmtdev show -jp { "show": { "vdpasim_net": { "supported_classes": [ "net" ] } } } Signed-off-by: Parav Pandit <parav@nvidia.com> Reviewed-by: Eli Cohen <elic@nvidia.com> Reviewed-by: Jason Wang <jasowang@redhat.com> Link: https://lore.kernel.org/r/20210105103203.82508-4-parav@nvidia.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Including a bugfix: vpda: correctly size vdpa_nl_policy We need to ensure last entry of vdpa_nl_policy[] is zero, otherwise out-of-bounds access is hurting us. Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Cc: Parav Pandit <parav@nvidia.com> Cc: Eli Cohen <elic@nvidia.com> Cc: Jason Wang <jasowang@redhat.com> Cc: Michael S. Tsirkin <mst@redhat.com> Link: https://lore.kernel.org/r/20210210134911.4119555-1-eric.dumazet@gmail.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-01-05 10:32:00 +00:00
*/
int vdpa_mgmtdev_register(struct vdpa_mgmt_dev *mdev)
{
if (!mdev->device || !mdev->ops || !mdev->ops->dev_add || !mdev->ops->dev_del)
return -EINVAL;
INIT_LIST_HEAD(&mdev->list);
down_write(&vdpa_dev_lock);
vdpa: Define vdpa mgmt device, ops and a netlink interface To add one or more VDPA devices, define a management device which allows adding or removing vdpa device. A management device defines set of callbacks to manage vdpa devices. To begin with, it defines add and remove callbacks through which a user defined vdpa device can be added or removed. A unique management device is identified by its unique handle identified by management device name and optionally the bus name. Hence, introduce routine through which driver can register a management device and its callback operations for adding and remove a vdpa device. Introduce vdpa netlink socket family so that user can query management device and its attributes. Example of show vdpa management device which allows creating vdpa device of networking class (device id = 0x1) of virtio specification 1.1 section 5.1.1. $ vdpa mgmtdev show vdpasim_net: supported_classes: net Example of showing vdpa management device in JSON format. $ vdpa mgmtdev show -jp { "show": { "vdpasim_net": { "supported_classes": [ "net" ] } } } Signed-off-by: Parav Pandit <parav@nvidia.com> Reviewed-by: Eli Cohen <elic@nvidia.com> Reviewed-by: Jason Wang <jasowang@redhat.com> Link: https://lore.kernel.org/r/20210105103203.82508-4-parav@nvidia.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Including a bugfix: vpda: correctly size vdpa_nl_policy We need to ensure last entry of vdpa_nl_policy[] is zero, otherwise out-of-bounds access is hurting us. Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Cc: Parav Pandit <parav@nvidia.com> Cc: Eli Cohen <elic@nvidia.com> Cc: Jason Wang <jasowang@redhat.com> Cc: Michael S. Tsirkin <mst@redhat.com> Link: https://lore.kernel.org/r/20210210134911.4119555-1-eric.dumazet@gmail.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-01-05 10:32:00 +00:00
list_add_tail(&mdev->list, &mdev_head);
up_write(&vdpa_dev_lock);
vdpa: Define vdpa mgmt device, ops and a netlink interface To add one or more VDPA devices, define a management device which allows adding or removing vdpa device. A management device defines set of callbacks to manage vdpa devices. To begin with, it defines add and remove callbacks through which a user defined vdpa device can be added or removed. A unique management device is identified by its unique handle identified by management device name and optionally the bus name. Hence, introduce routine through which driver can register a management device and its callback operations for adding and remove a vdpa device. Introduce vdpa netlink socket family so that user can query management device and its attributes. Example of show vdpa management device which allows creating vdpa device of networking class (device id = 0x1) of virtio specification 1.1 section 5.1.1. $ vdpa mgmtdev show vdpasim_net: supported_classes: net Example of showing vdpa management device in JSON format. $ vdpa mgmtdev show -jp { "show": { "vdpasim_net": { "supported_classes": [ "net" ] } } } Signed-off-by: Parav Pandit <parav@nvidia.com> Reviewed-by: Eli Cohen <elic@nvidia.com> Reviewed-by: Jason Wang <jasowang@redhat.com> Link: https://lore.kernel.org/r/20210105103203.82508-4-parav@nvidia.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Including a bugfix: vpda: correctly size vdpa_nl_policy We need to ensure last entry of vdpa_nl_policy[] is zero, otherwise out-of-bounds access is hurting us. Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Cc: Parav Pandit <parav@nvidia.com> Cc: Eli Cohen <elic@nvidia.com> Cc: Jason Wang <jasowang@redhat.com> Cc: Michael S. Tsirkin <mst@redhat.com> Link: https://lore.kernel.org/r/20210210134911.4119555-1-eric.dumazet@gmail.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-01-05 10:32:00 +00:00
return 0;
}
EXPORT_SYMBOL_GPL(vdpa_mgmtdev_register);
static int vdpa_match_remove(struct device *dev, void *data)
{
struct vdpa_device *vdev = container_of(dev, struct vdpa_device, dev);
struct vdpa_mgmt_dev *mdev = vdev->mdev;
if (mdev == data)
mdev->ops->dev_del(mdev, vdev);
return 0;
}
vdpa: Define vdpa mgmt device, ops and a netlink interface To add one or more VDPA devices, define a management device which allows adding or removing vdpa device. A management device defines set of callbacks to manage vdpa devices. To begin with, it defines add and remove callbacks through which a user defined vdpa device can be added or removed. A unique management device is identified by its unique handle identified by management device name and optionally the bus name. Hence, introduce routine through which driver can register a management device and its callback operations for adding and remove a vdpa device. Introduce vdpa netlink socket family so that user can query management device and its attributes. Example of show vdpa management device which allows creating vdpa device of networking class (device id = 0x1) of virtio specification 1.1 section 5.1.1. $ vdpa mgmtdev show vdpasim_net: supported_classes: net Example of showing vdpa management device in JSON format. $ vdpa mgmtdev show -jp { "show": { "vdpasim_net": { "supported_classes": [ "net" ] } } } Signed-off-by: Parav Pandit <parav@nvidia.com> Reviewed-by: Eli Cohen <elic@nvidia.com> Reviewed-by: Jason Wang <jasowang@redhat.com> Link: https://lore.kernel.org/r/20210105103203.82508-4-parav@nvidia.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Including a bugfix: vpda: correctly size vdpa_nl_policy We need to ensure last entry of vdpa_nl_policy[] is zero, otherwise out-of-bounds access is hurting us. Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Cc: Parav Pandit <parav@nvidia.com> Cc: Eli Cohen <elic@nvidia.com> Cc: Jason Wang <jasowang@redhat.com> Cc: Michael S. Tsirkin <mst@redhat.com> Link: https://lore.kernel.org/r/20210210134911.4119555-1-eric.dumazet@gmail.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-01-05 10:32:00 +00:00
void vdpa_mgmtdev_unregister(struct vdpa_mgmt_dev *mdev)
{
down_write(&vdpa_dev_lock);
vdpa: Define vdpa mgmt device, ops and a netlink interface To add one or more VDPA devices, define a management device which allows adding or removing vdpa device. A management device defines set of callbacks to manage vdpa devices. To begin with, it defines add and remove callbacks through which a user defined vdpa device can be added or removed. A unique management device is identified by its unique handle identified by management device name and optionally the bus name. Hence, introduce routine through which driver can register a management device and its callback operations for adding and remove a vdpa device. Introduce vdpa netlink socket family so that user can query management device and its attributes. Example of show vdpa management device which allows creating vdpa device of networking class (device id = 0x1) of virtio specification 1.1 section 5.1.1. $ vdpa mgmtdev show vdpasim_net: supported_classes: net Example of showing vdpa management device in JSON format. $ vdpa mgmtdev show -jp { "show": { "vdpasim_net": { "supported_classes": [ "net" ] } } } Signed-off-by: Parav Pandit <parav@nvidia.com> Reviewed-by: Eli Cohen <elic@nvidia.com> Reviewed-by: Jason Wang <jasowang@redhat.com> Link: https://lore.kernel.org/r/20210105103203.82508-4-parav@nvidia.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Including a bugfix: vpda: correctly size vdpa_nl_policy We need to ensure last entry of vdpa_nl_policy[] is zero, otherwise out-of-bounds access is hurting us. Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Cc: Parav Pandit <parav@nvidia.com> Cc: Eli Cohen <elic@nvidia.com> Cc: Jason Wang <jasowang@redhat.com> Cc: Michael S. Tsirkin <mst@redhat.com> Link: https://lore.kernel.org/r/20210210134911.4119555-1-eric.dumazet@gmail.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-01-05 10:32:00 +00:00
list_del(&mdev->list);
/* Filter out all the entries belong to this management device and delete it. */
bus_for_each_dev(&vdpa_bus, NULL, mdev, vdpa_match_remove);
up_write(&vdpa_dev_lock);
vdpa: Define vdpa mgmt device, ops and a netlink interface To add one or more VDPA devices, define a management device which allows adding or removing vdpa device. A management device defines set of callbacks to manage vdpa devices. To begin with, it defines add and remove callbacks through which a user defined vdpa device can be added or removed. A unique management device is identified by its unique handle identified by management device name and optionally the bus name. Hence, introduce routine through which driver can register a management device and its callback operations for adding and remove a vdpa device. Introduce vdpa netlink socket family so that user can query management device and its attributes. Example of show vdpa management device which allows creating vdpa device of networking class (device id = 0x1) of virtio specification 1.1 section 5.1.1. $ vdpa mgmtdev show vdpasim_net: supported_classes: net Example of showing vdpa management device in JSON format. $ vdpa mgmtdev show -jp { "show": { "vdpasim_net": { "supported_classes": [ "net" ] } } } Signed-off-by: Parav Pandit <parav@nvidia.com> Reviewed-by: Eli Cohen <elic@nvidia.com> Reviewed-by: Jason Wang <jasowang@redhat.com> Link: https://lore.kernel.org/r/20210105103203.82508-4-parav@nvidia.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Including a bugfix: vpda: correctly size vdpa_nl_policy We need to ensure last entry of vdpa_nl_policy[] is zero, otherwise out-of-bounds access is hurting us. Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Cc: Parav Pandit <parav@nvidia.com> Cc: Eli Cohen <elic@nvidia.com> Cc: Jason Wang <jasowang@redhat.com> Cc: Michael S. Tsirkin <mst@redhat.com> Link: https://lore.kernel.org/r/20210210134911.4119555-1-eric.dumazet@gmail.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-01-05 10:32:00 +00:00
}
EXPORT_SYMBOL_GPL(vdpa_mgmtdev_unregister);
static void vdpa_get_config_unlocked(struct vdpa_device *vdev,
unsigned int offset,
void *buf, unsigned int len)
{
const struct vdpa_config_ops *ops = vdev->config;
/*
* Config accesses aren't supposed to trigger before features are set.
* If it does happen we assume a legacy guest.
*/
if (!vdev->features_valid)
vdpa_set_features_unlocked(vdev, 0);
ops->get_config(vdev, offset, buf, len);
}
/**
* vdpa_get_config - Get one or more device configuration fields.
* @vdev: vdpa device to operate on
* @offset: starting byte offset of the field
* @buf: buffer pointer to read to
* @len: length of the configuration fields in bytes
*/
void vdpa_get_config(struct vdpa_device *vdev, unsigned int offset,
void *buf, unsigned int len)
{
down_read(&vdev->cf_lock);
vdpa_get_config_unlocked(vdev, offset, buf, len);
up_read(&vdev->cf_lock);
}
EXPORT_SYMBOL_GPL(vdpa_get_config);
/**
* vdpa_set_config - Set one or more device configuration fields.
* @vdev: vdpa device to operate on
* @offset: starting byte offset of the field
* @buf: buffer pointer to read from
* @length: length of the configuration fields in bytes
*/
void vdpa_set_config(struct vdpa_device *vdev, unsigned int offset,
const void *buf, unsigned int length)
{
down_write(&vdev->cf_lock);
vdev->config->set_config(vdev, offset, buf, length);
up_write(&vdev->cf_lock);
}
EXPORT_SYMBOL_GPL(vdpa_set_config);
vdpa: Define vdpa mgmt device, ops and a netlink interface To add one or more VDPA devices, define a management device which allows adding or removing vdpa device. A management device defines set of callbacks to manage vdpa devices. To begin with, it defines add and remove callbacks through which a user defined vdpa device can be added or removed. A unique management device is identified by its unique handle identified by management device name and optionally the bus name. Hence, introduce routine through which driver can register a management device and its callback operations for adding and remove a vdpa device. Introduce vdpa netlink socket family so that user can query management device and its attributes. Example of show vdpa management device which allows creating vdpa device of networking class (device id = 0x1) of virtio specification 1.1 section 5.1.1. $ vdpa mgmtdev show vdpasim_net: supported_classes: net Example of showing vdpa management device in JSON format. $ vdpa mgmtdev show -jp { "show": { "vdpasim_net": { "supported_classes": [ "net" ] } } } Signed-off-by: Parav Pandit <parav@nvidia.com> Reviewed-by: Eli Cohen <elic@nvidia.com> Reviewed-by: Jason Wang <jasowang@redhat.com> Link: https://lore.kernel.org/r/20210105103203.82508-4-parav@nvidia.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Including a bugfix: vpda: correctly size vdpa_nl_policy We need to ensure last entry of vdpa_nl_policy[] is zero, otherwise out-of-bounds access is hurting us. Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Cc: Parav Pandit <parav@nvidia.com> Cc: Eli Cohen <elic@nvidia.com> Cc: Jason Wang <jasowang@redhat.com> Cc: Michael S. Tsirkin <mst@redhat.com> Link: https://lore.kernel.org/r/20210210134911.4119555-1-eric.dumazet@gmail.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-01-05 10:32:00 +00:00
static bool mgmtdev_handle_match(const struct vdpa_mgmt_dev *mdev,
const char *busname, const char *devname)
{
/* Bus name is optional for simulated management device, so ignore the
* device with bus if bus attribute is provided.
*/
if ((busname && !mdev->device->bus) || (!busname && mdev->device->bus))
return false;
if (!busname && strcmp(dev_name(mdev->device), devname) == 0)
return true;
if (busname && (strcmp(mdev->device->bus->name, busname) == 0) &&
(strcmp(dev_name(mdev->device), devname) == 0))
return true;
return false;
}
static struct vdpa_mgmt_dev *vdpa_mgmtdev_get_from_attr(struct nlattr **attrs)
{
struct vdpa_mgmt_dev *mdev;
const char *busname = NULL;
const char *devname;
if (!attrs[VDPA_ATTR_MGMTDEV_DEV_NAME])
return ERR_PTR(-EINVAL);
devname = nla_data(attrs[VDPA_ATTR_MGMTDEV_DEV_NAME]);
if (attrs[VDPA_ATTR_MGMTDEV_BUS_NAME])
busname = nla_data(attrs[VDPA_ATTR_MGMTDEV_BUS_NAME]);
list_for_each_entry(mdev, &mdev_head, list) {
if (mgmtdev_handle_match(mdev, busname, devname))
return mdev;
}
return ERR_PTR(-ENODEV);
}
static int vdpa_nl_mgmtdev_handle_fill(struct sk_buff *msg, const struct vdpa_mgmt_dev *mdev)
{
if (mdev->device->bus &&
nla_put_string(msg, VDPA_ATTR_MGMTDEV_BUS_NAME, mdev->device->bus->name))
return -EMSGSIZE;
if (nla_put_string(msg, VDPA_ATTR_MGMTDEV_DEV_NAME, dev_name(mdev->device)))
return -EMSGSIZE;
return 0;
}
static int vdpa_mgmtdev_fill(const struct vdpa_mgmt_dev *mdev, struct sk_buff *msg,
u32 portid, u32 seq, int flags)
{
u64 supported_classes = 0;
void *hdr;
int i = 0;
int err;
hdr = genlmsg_put(msg, portid, seq, &vdpa_nl_family, flags, VDPA_CMD_MGMTDEV_NEW);
if (!hdr)
return -EMSGSIZE;
err = vdpa_nl_mgmtdev_handle_fill(msg, mdev);
if (err)
goto msg_err;
while (mdev->id_table[i].device) {
if (mdev->id_table[i].device <= 63)
supported_classes |= BIT_ULL(mdev->id_table[i].device);
vdpa: Define vdpa mgmt device, ops and a netlink interface To add one or more VDPA devices, define a management device which allows adding or removing vdpa device. A management device defines set of callbacks to manage vdpa devices. To begin with, it defines add and remove callbacks through which a user defined vdpa device can be added or removed. A unique management device is identified by its unique handle identified by management device name and optionally the bus name. Hence, introduce routine through which driver can register a management device and its callback operations for adding and remove a vdpa device. Introduce vdpa netlink socket family so that user can query management device and its attributes. Example of show vdpa management device which allows creating vdpa device of networking class (device id = 0x1) of virtio specification 1.1 section 5.1.1. $ vdpa mgmtdev show vdpasim_net: supported_classes: net Example of showing vdpa management device in JSON format. $ vdpa mgmtdev show -jp { "show": { "vdpasim_net": { "supported_classes": [ "net" ] } } } Signed-off-by: Parav Pandit <parav@nvidia.com> Reviewed-by: Eli Cohen <elic@nvidia.com> Reviewed-by: Jason Wang <jasowang@redhat.com> Link: https://lore.kernel.org/r/20210105103203.82508-4-parav@nvidia.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Including a bugfix: vpda: correctly size vdpa_nl_policy We need to ensure last entry of vdpa_nl_policy[] is zero, otherwise out-of-bounds access is hurting us. Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Cc: Parav Pandit <parav@nvidia.com> Cc: Eli Cohen <elic@nvidia.com> Cc: Jason Wang <jasowang@redhat.com> Cc: Michael S. Tsirkin <mst@redhat.com> Link: https://lore.kernel.org/r/20210210134911.4119555-1-eric.dumazet@gmail.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-01-05 10:32:00 +00:00
i++;
}
if (nla_put_u64_64bit(msg, VDPA_ATTR_MGMTDEV_SUPPORTED_CLASSES,
supported_classes, VDPA_ATTR_UNSPEC)) {
err = -EMSGSIZE;
goto msg_err;
}
if (nla_put_u32(msg, VDPA_ATTR_DEV_MGMTDEV_MAX_VQS,
mdev->max_supported_vqs)) {
err = -EMSGSIZE;
goto msg_err;
}
if (nla_put_u64_64bit(msg, VDPA_ATTR_DEV_SUPPORTED_FEATURES,
mdev->supported_features, VDPA_ATTR_PAD)) {
err = -EMSGSIZE;
goto msg_err;
}
vdpa: Define vdpa mgmt device, ops and a netlink interface To add one or more VDPA devices, define a management device which allows adding or removing vdpa device. A management device defines set of callbacks to manage vdpa devices. To begin with, it defines add and remove callbacks through which a user defined vdpa device can be added or removed. A unique management device is identified by its unique handle identified by management device name and optionally the bus name. Hence, introduce routine through which driver can register a management device and its callback operations for adding and remove a vdpa device. Introduce vdpa netlink socket family so that user can query management device and its attributes. Example of show vdpa management device which allows creating vdpa device of networking class (device id = 0x1) of virtio specification 1.1 section 5.1.1. $ vdpa mgmtdev show vdpasim_net: supported_classes: net Example of showing vdpa management device in JSON format. $ vdpa mgmtdev show -jp { "show": { "vdpasim_net": { "supported_classes": [ "net" ] } } } Signed-off-by: Parav Pandit <parav@nvidia.com> Reviewed-by: Eli Cohen <elic@nvidia.com> Reviewed-by: Jason Wang <jasowang@redhat.com> Link: https://lore.kernel.org/r/20210105103203.82508-4-parav@nvidia.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Including a bugfix: vpda: correctly size vdpa_nl_policy We need to ensure last entry of vdpa_nl_policy[] is zero, otherwise out-of-bounds access is hurting us. Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Cc: Parav Pandit <parav@nvidia.com> Cc: Eli Cohen <elic@nvidia.com> Cc: Jason Wang <jasowang@redhat.com> Cc: Michael S. Tsirkin <mst@redhat.com> Link: https://lore.kernel.org/r/20210210134911.4119555-1-eric.dumazet@gmail.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-01-05 10:32:00 +00:00
genlmsg_end(msg, hdr);
return 0;
msg_err:
genlmsg_cancel(msg, hdr);
return err;
}
static int vdpa_nl_cmd_mgmtdev_get_doit(struct sk_buff *skb, struct genl_info *info)
{
struct vdpa_mgmt_dev *mdev;
struct sk_buff *msg;
int err;
msg = nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_KERNEL);
if (!msg)
return -ENOMEM;
down_read(&vdpa_dev_lock);
vdpa: Define vdpa mgmt device, ops and a netlink interface To add one or more VDPA devices, define a management device which allows adding or removing vdpa device. A management device defines set of callbacks to manage vdpa devices. To begin with, it defines add and remove callbacks through which a user defined vdpa device can be added or removed. A unique management device is identified by its unique handle identified by management device name and optionally the bus name. Hence, introduce routine through which driver can register a management device and its callback operations for adding and remove a vdpa device. Introduce vdpa netlink socket family so that user can query management device and its attributes. Example of show vdpa management device which allows creating vdpa device of networking class (device id = 0x1) of virtio specification 1.1 section 5.1.1. $ vdpa mgmtdev show vdpasim_net: supported_classes: net Example of showing vdpa management device in JSON format. $ vdpa mgmtdev show -jp { "show": { "vdpasim_net": { "supported_classes": [ "net" ] } } } Signed-off-by: Parav Pandit <parav@nvidia.com> Reviewed-by: Eli Cohen <elic@nvidia.com> Reviewed-by: Jason Wang <jasowang@redhat.com> Link: https://lore.kernel.org/r/20210105103203.82508-4-parav@nvidia.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Including a bugfix: vpda: correctly size vdpa_nl_policy We need to ensure last entry of vdpa_nl_policy[] is zero, otherwise out-of-bounds access is hurting us. Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Cc: Parav Pandit <parav@nvidia.com> Cc: Eli Cohen <elic@nvidia.com> Cc: Jason Wang <jasowang@redhat.com> Cc: Michael S. Tsirkin <mst@redhat.com> Link: https://lore.kernel.org/r/20210210134911.4119555-1-eric.dumazet@gmail.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-01-05 10:32:00 +00:00
mdev = vdpa_mgmtdev_get_from_attr(info->attrs);
if (IS_ERR(mdev)) {
up_read(&vdpa_dev_lock);
vdpa: Define vdpa mgmt device, ops and a netlink interface To add one or more VDPA devices, define a management device which allows adding or removing vdpa device. A management device defines set of callbacks to manage vdpa devices. To begin with, it defines add and remove callbacks through which a user defined vdpa device can be added or removed. A unique management device is identified by its unique handle identified by management device name and optionally the bus name. Hence, introduce routine through which driver can register a management device and its callback operations for adding and remove a vdpa device. Introduce vdpa netlink socket family so that user can query management device and its attributes. Example of show vdpa management device which allows creating vdpa device of networking class (device id = 0x1) of virtio specification 1.1 section 5.1.1. $ vdpa mgmtdev show vdpasim_net: supported_classes: net Example of showing vdpa management device in JSON format. $ vdpa mgmtdev show -jp { "show": { "vdpasim_net": { "supported_classes": [ "net" ] } } } Signed-off-by: Parav Pandit <parav@nvidia.com> Reviewed-by: Eli Cohen <elic@nvidia.com> Reviewed-by: Jason Wang <jasowang@redhat.com> Link: https://lore.kernel.org/r/20210105103203.82508-4-parav@nvidia.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Including a bugfix: vpda: correctly size vdpa_nl_policy We need to ensure last entry of vdpa_nl_policy[] is zero, otherwise out-of-bounds access is hurting us. Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Cc: Parav Pandit <parav@nvidia.com> Cc: Eli Cohen <elic@nvidia.com> Cc: Jason Wang <jasowang@redhat.com> Cc: Michael S. Tsirkin <mst@redhat.com> Link: https://lore.kernel.org/r/20210210134911.4119555-1-eric.dumazet@gmail.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-01-05 10:32:00 +00:00
NL_SET_ERR_MSG_MOD(info->extack, "Fail to find the specified mgmt device");
err = PTR_ERR(mdev);
goto out;
}
err = vdpa_mgmtdev_fill(mdev, msg, info->snd_portid, info->snd_seq, 0);
up_read(&vdpa_dev_lock);
vdpa: Define vdpa mgmt device, ops and a netlink interface To add one or more VDPA devices, define a management device which allows adding or removing vdpa device. A management device defines set of callbacks to manage vdpa devices. To begin with, it defines add and remove callbacks through which a user defined vdpa device can be added or removed. A unique management device is identified by its unique handle identified by management device name and optionally the bus name. Hence, introduce routine through which driver can register a management device and its callback operations for adding and remove a vdpa device. Introduce vdpa netlink socket family so that user can query management device and its attributes. Example of show vdpa management device which allows creating vdpa device of networking class (device id = 0x1) of virtio specification 1.1 section 5.1.1. $ vdpa mgmtdev show vdpasim_net: supported_classes: net Example of showing vdpa management device in JSON format. $ vdpa mgmtdev show -jp { "show": { "vdpasim_net": { "supported_classes": [ "net" ] } } } Signed-off-by: Parav Pandit <parav@nvidia.com> Reviewed-by: Eli Cohen <elic@nvidia.com> Reviewed-by: Jason Wang <jasowang@redhat.com> Link: https://lore.kernel.org/r/20210105103203.82508-4-parav@nvidia.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Including a bugfix: vpda: correctly size vdpa_nl_policy We need to ensure last entry of vdpa_nl_policy[] is zero, otherwise out-of-bounds access is hurting us. Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Cc: Parav Pandit <parav@nvidia.com> Cc: Eli Cohen <elic@nvidia.com> Cc: Jason Wang <jasowang@redhat.com> Cc: Michael S. Tsirkin <mst@redhat.com> Link: https://lore.kernel.org/r/20210210134911.4119555-1-eric.dumazet@gmail.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-01-05 10:32:00 +00:00
if (err)
goto out;
err = genlmsg_reply(msg, info);
return err;
out:
nlmsg_free(msg);
return err;
}
static int
vdpa_nl_cmd_mgmtdev_get_dumpit(struct sk_buff *msg, struct netlink_callback *cb)
{
struct vdpa_mgmt_dev *mdev;
int start = cb->args[0];
int idx = 0;
int err;
down_read(&vdpa_dev_lock);
vdpa: Define vdpa mgmt device, ops and a netlink interface To add one or more VDPA devices, define a management device which allows adding or removing vdpa device. A management device defines set of callbacks to manage vdpa devices. To begin with, it defines add and remove callbacks through which a user defined vdpa device can be added or removed. A unique management device is identified by its unique handle identified by management device name and optionally the bus name. Hence, introduce routine through which driver can register a management device and its callback operations for adding and remove a vdpa device. Introduce vdpa netlink socket family so that user can query management device and its attributes. Example of show vdpa management device which allows creating vdpa device of networking class (device id = 0x1) of virtio specification 1.1 section 5.1.1. $ vdpa mgmtdev show vdpasim_net: supported_classes: net Example of showing vdpa management device in JSON format. $ vdpa mgmtdev show -jp { "show": { "vdpasim_net": { "supported_classes": [ "net" ] } } } Signed-off-by: Parav Pandit <parav@nvidia.com> Reviewed-by: Eli Cohen <elic@nvidia.com> Reviewed-by: Jason Wang <jasowang@redhat.com> Link: https://lore.kernel.org/r/20210105103203.82508-4-parav@nvidia.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Including a bugfix: vpda: correctly size vdpa_nl_policy We need to ensure last entry of vdpa_nl_policy[] is zero, otherwise out-of-bounds access is hurting us. Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Cc: Parav Pandit <parav@nvidia.com> Cc: Eli Cohen <elic@nvidia.com> Cc: Jason Wang <jasowang@redhat.com> Cc: Michael S. Tsirkin <mst@redhat.com> Link: https://lore.kernel.org/r/20210210134911.4119555-1-eric.dumazet@gmail.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-01-05 10:32:00 +00:00
list_for_each_entry(mdev, &mdev_head, list) {
if (idx < start) {
idx++;
continue;
}
err = vdpa_mgmtdev_fill(mdev, msg, NETLINK_CB(cb->skb).portid,
cb->nlh->nlmsg_seq, NLM_F_MULTI);
if (err)
goto out;
idx++;
}
out:
up_read(&vdpa_dev_lock);
vdpa: Define vdpa mgmt device, ops and a netlink interface To add one or more VDPA devices, define a management device which allows adding or removing vdpa device. A management device defines set of callbacks to manage vdpa devices. To begin with, it defines add and remove callbacks through which a user defined vdpa device can be added or removed. A unique management device is identified by its unique handle identified by management device name and optionally the bus name. Hence, introduce routine through which driver can register a management device and its callback operations for adding and remove a vdpa device. Introduce vdpa netlink socket family so that user can query management device and its attributes. Example of show vdpa management device which allows creating vdpa device of networking class (device id = 0x1) of virtio specification 1.1 section 5.1.1. $ vdpa mgmtdev show vdpasim_net: supported_classes: net Example of showing vdpa management device in JSON format. $ vdpa mgmtdev show -jp { "show": { "vdpasim_net": { "supported_classes": [ "net" ] } } } Signed-off-by: Parav Pandit <parav@nvidia.com> Reviewed-by: Eli Cohen <elic@nvidia.com> Reviewed-by: Jason Wang <jasowang@redhat.com> Link: https://lore.kernel.org/r/20210105103203.82508-4-parav@nvidia.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Including a bugfix: vpda: correctly size vdpa_nl_policy We need to ensure last entry of vdpa_nl_policy[] is zero, otherwise out-of-bounds access is hurting us. Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Cc: Parav Pandit <parav@nvidia.com> Cc: Eli Cohen <elic@nvidia.com> Cc: Jason Wang <jasowang@redhat.com> Cc: Michael S. Tsirkin <mst@redhat.com> Link: https://lore.kernel.org/r/20210210134911.4119555-1-eric.dumazet@gmail.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-01-05 10:32:00 +00:00
cb->args[0] = idx;
return msg->len;
}
#define VDPA_DEV_NET_ATTRS_MASK (BIT_ULL(VDPA_ATTR_DEV_NET_CFG_MACADDR) | \
BIT_ULL(VDPA_ATTR_DEV_NET_CFG_MTU) | \
BIT_ULL(VDPA_ATTR_DEV_NET_CFG_MAX_VQP))
static int vdpa_nl_cmd_dev_add_set_doit(struct sk_buff *skb, struct genl_info *info)
{
struct vdpa_dev_set_config config = {};
struct nlattr **nl_attrs = info->attrs;
struct vdpa_mgmt_dev *mdev;
const u8 *macaddr;
const char *name;
int err = 0;
if (!info->attrs[VDPA_ATTR_DEV_NAME])
return -EINVAL;
name = nla_data(info->attrs[VDPA_ATTR_DEV_NAME]);
if (nl_attrs[VDPA_ATTR_DEV_NET_CFG_MACADDR]) {
macaddr = nla_data(nl_attrs[VDPA_ATTR_DEV_NET_CFG_MACADDR]);
memcpy(config.net.mac, macaddr, sizeof(config.net.mac));
config.mask |= BIT_ULL(VDPA_ATTR_DEV_NET_CFG_MACADDR);
}
if (nl_attrs[VDPA_ATTR_DEV_NET_CFG_MTU]) {
config.net.mtu =
nla_get_u16(nl_attrs[VDPA_ATTR_DEV_NET_CFG_MTU]);
config.mask |= BIT_ULL(VDPA_ATTR_DEV_NET_CFG_MTU);
}
if (nl_attrs[VDPA_ATTR_DEV_NET_CFG_MAX_VQP]) {
config.net.max_vq_pairs =
nla_get_u16(nl_attrs[VDPA_ATTR_DEV_NET_CFG_MAX_VQP]);
if (!config.net.max_vq_pairs) {
NL_SET_ERR_MSG_MOD(info->extack,
"At least one pair of VQs is required");
return -EINVAL;
}
config.mask |= BIT_ULL(VDPA_ATTR_DEV_NET_CFG_MAX_VQP);
}
/* Skip checking capability if user didn't prefer to configure any
* device networking attributes. It is likely that user might have used
* a device specific method to configure such attributes or using device
* default attributes.
*/
if ((config.mask & VDPA_DEV_NET_ATTRS_MASK) &&
!netlink_capable(skb, CAP_NET_ADMIN))
return -EPERM;
down_write(&vdpa_dev_lock);
mdev = vdpa_mgmtdev_get_from_attr(info->attrs);
if (IS_ERR(mdev)) {
NL_SET_ERR_MSG_MOD(info->extack, "Fail to find the specified management device");
err = PTR_ERR(mdev);
goto err;
}
if ((config.mask & mdev->config_attr_mask) != config.mask) {
NL_SET_ERR_MSG_MOD(info->extack,
"All provided attributes are not supported");
err = -EOPNOTSUPP;
goto err;
}
err = mdev->ops->dev_add(mdev, name, &config);
err:
up_write(&vdpa_dev_lock);
return err;
}
static int vdpa_nl_cmd_dev_del_set_doit(struct sk_buff *skb, struct genl_info *info)
{
struct vdpa_mgmt_dev *mdev;
struct vdpa_device *vdev;
struct device *dev;
const char *name;
int err = 0;
if (!info->attrs[VDPA_ATTR_DEV_NAME])
return -EINVAL;
name = nla_data(info->attrs[VDPA_ATTR_DEV_NAME]);
down_write(&vdpa_dev_lock);
dev = bus_find_device(&vdpa_bus, NULL, name, vdpa_name_match);
if (!dev) {
NL_SET_ERR_MSG_MOD(info->extack, "device not found");
err = -ENODEV;
goto dev_err;
}
vdev = container_of(dev, struct vdpa_device, dev);
if (!vdev->mdev) {
NL_SET_ERR_MSG_MOD(info->extack, "Only user created device can be deleted by user");
err = -EINVAL;
goto mdev_err;
}
mdev = vdev->mdev;
mdev->ops->dev_del(mdev, vdev);
mdev_err:
put_device(dev);
dev_err:
up_write(&vdpa_dev_lock);
return err;
}
static int
vdpa_dev_fill(struct vdpa_device *vdev, struct sk_buff *msg, u32 portid, u32 seq,
int flags, struct netlink_ext_ack *extack)
{
u16 max_vq_size;
u16 min_vq_size = 1;
u32 device_id;
u32 vendor_id;
void *hdr;
int err;
hdr = genlmsg_put(msg, portid, seq, &vdpa_nl_family, flags, VDPA_CMD_DEV_NEW);
if (!hdr)
return -EMSGSIZE;
err = vdpa_nl_mgmtdev_handle_fill(msg, vdev->mdev);
if (err)
goto msg_err;
device_id = vdev->config->get_device_id(vdev);
vendor_id = vdev->config->get_vendor_id(vdev);
max_vq_size = vdev->config->get_vq_num_max(vdev);
if (vdev->config->get_vq_num_min)
min_vq_size = vdev->config->get_vq_num_min(vdev);
err = -EMSGSIZE;
if (nla_put_string(msg, VDPA_ATTR_DEV_NAME, dev_name(&vdev->dev)))
goto msg_err;
if (nla_put_u32(msg, VDPA_ATTR_DEV_ID, device_id))
goto msg_err;
if (nla_put_u32(msg, VDPA_ATTR_DEV_VENDOR_ID, vendor_id))
goto msg_err;
if (nla_put_u32(msg, VDPA_ATTR_DEV_MAX_VQS, vdev->nvqs))
goto msg_err;
if (nla_put_u16(msg, VDPA_ATTR_DEV_MAX_VQ_SIZE, max_vq_size))
goto msg_err;
if (nla_put_u16(msg, VDPA_ATTR_DEV_MIN_VQ_SIZE, min_vq_size))
goto msg_err;
genlmsg_end(msg, hdr);
return 0;
msg_err:
genlmsg_cancel(msg, hdr);
return err;
}
static int vdpa_nl_cmd_dev_get_doit(struct sk_buff *skb, struct genl_info *info)
{
struct vdpa_device *vdev;
struct sk_buff *msg;
const char *devname;
struct device *dev;
int err;
if (!info->attrs[VDPA_ATTR_DEV_NAME])
return -EINVAL;
devname = nla_data(info->attrs[VDPA_ATTR_DEV_NAME]);
msg = nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_KERNEL);
if (!msg)
return -ENOMEM;
down_read(&vdpa_dev_lock);
dev = bus_find_device(&vdpa_bus, NULL, devname, vdpa_name_match);
if (!dev) {
NL_SET_ERR_MSG_MOD(info->extack, "device not found");
err = -ENODEV;
goto err;
}
vdev = container_of(dev, struct vdpa_device, dev);
if (!vdev->mdev) {
err = -EINVAL;
goto mdev_err;
}
err = vdpa_dev_fill(vdev, msg, info->snd_portid, info->snd_seq, 0, info->extack);
if (err)
goto mdev_err;
err = genlmsg_reply(msg, info);
put_device(dev);
up_read(&vdpa_dev_lock);
return err;
mdev_err:
put_device(dev);
err:
up_read(&vdpa_dev_lock);
nlmsg_free(msg);
return err;
}
struct vdpa_dev_dump_info {
struct sk_buff *msg;
struct netlink_callback *cb;
int start_idx;
int idx;
};
static int vdpa_dev_dump(struct device *dev, void *data)
{
struct vdpa_device *vdev = container_of(dev, struct vdpa_device, dev);
struct vdpa_dev_dump_info *info = data;
int err;
if (!vdev->mdev)
return 0;
if (info->idx < info->start_idx) {
info->idx++;
return 0;
}
err = vdpa_dev_fill(vdev, info->msg, NETLINK_CB(info->cb->skb).portid,
info->cb->nlh->nlmsg_seq, NLM_F_MULTI, info->cb->extack);
if (err)
return err;
info->idx++;
return 0;
}
static int vdpa_nl_cmd_dev_get_dumpit(struct sk_buff *msg, struct netlink_callback *cb)
{
struct vdpa_dev_dump_info info;
info.msg = msg;
info.cb = cb;
info.start_idx = cb->args[0];
info.idx = 0;
down_read(&vdpa_dev_lock);
bus_for_each_dev(&vdpa_bus, NULL, &info, vdpa_dev_dump);
up_read(&vdpa_dev_lock);
cb->args[0] = info.idx;
return msg->len;
}
static int vdpa_dev_net_mq_config_fill(struct vdpa_device *vdev,
struct sk_buff *msg, u64 features,
const struct virtio_net_config *config)
{
u16 val_u16;
if ((features & BIT_ULL(VIRTIO_NET_F_MQ)) == 0)
return 0;
val_u16 = le16_to_cpu(config->max_virtqueue_pairs);
return nla_put_u16(msg, VDPA_ATTR_DEV_NET_CFG_MAX_VQP, val_u16);
}
static int vdpa_dev_net_config_fill(struct vdpa_device *vdev, struct sk_buff *msg)
{
struct virtio_net_config config = {};
u64 features;
u16 val_u16;
vdpa_get_config_unlocked(vdev, 0, &config, sizeof(config));
if (nla_put(msg, VDPA_ATTR_DEV_NET_CFG_MACADDR, sizeof(config.mac),
config.mac))
return -EMSGSIZE;
val_u16 = le16_to_cpu(config.status);
if (nla_put_u16(msg, VDPA_ATTR_DEV_NET_STATUS, val_u16))
return -EMSGSIZE;
val_u16 = le16_to_cpu(config.mtu);
if (nla_put_u16(msg, VDPA_ATTR_DEV_NET_CFG_MTU, val_u16))
return -EMSGSIZE;
features = vdev->config->get_driver_features(vdev);
if (nla_put_u64_64bit(msg, VDPA_ATTR_DEV_NEGOTIATED_FEATURES, features,
VDPA_ATTR_PAD))
return -EMSGSIZE;
return vdpa_dev_net_mq_config_fill(vdev, msg, features, &config);
}
static int
vdpa_dev_config_fill(struct vdpa_device *vdev, struct sk_buff *msg, u32 portid, u32 seq,
int flags, struct netlink_ext_ack *extack)
{
u32 device_id;
void *hdr;
u8 status;
int err;
down_read(&vdev->cf_lock);
status = vdev->config->get_status(vdev);
if (!(status & VIRTIO_CONFIG_S_FEATURES_OK)) {
NL_SET_ERR_MSG_MOD(extack, "Features negotiation not completed");
err = -EAGAIN;
goto out;
}
hdr = genlmsg_put(msg, portid, seq, &vdpa_nl_family, flags,
VDPA_CMD_DEV_CONFIG_GET);
if (!hdr) {
err = -EMSGSIZE;
goto out;
}
if (nla_put_string(msg, VDPA_ATTR_DEV_NAME, dev_name(&vdev->dev))) {
err = -EMSGSIZE;
goto msg_err;
}
device_id = vdev->config->get_device_id(vdev);
if (nla_put_u32(msg, VDPA_ATTR_DEV_ID, device_id)) {
err = -EMSGSIZE;
goto msg_err;
}
switch (device_id) {
case VIRTIO_ID_NET:
err = vdpa_dev_net_config_fill(vdev, msg);
break;
default:
err = -EOPNOTSUPP;
break;
}
if (err)
goto msg_err;
up_read(&vdev->cf_lock);
genlmsg_end(msg, hdr);
return 0;
msg_err:
genlmsg_cancel(msg, hdr);
out:
up_read(&vdev->cf_lock);
return err;
}
vdpa: Add support for querying vendor statistics Allows to read vendor statistics of a vdpa device. The specific statistics data are received from the upstream driver in the form of an (attribute name, attribute value) pairs. An example of statistics for mlx5_vdpa device are: received_desc - number of descriptors received by the virtqueue completed_desc - number of descriptors completed by the virtqueue A descriptor using indirect buffers is still counted as 1. In addition, N chained descriptors are counted correctly N times as one would expect. A new callback was added to vdpa_config_ops which provides the means for the vdpa driver to return statistics results. The interface allows for reading all the supported virtqueues, including the control virtqueue if it exists. Below are some examples taken from mlx5_vdpa which are introduced in the following patch: 1. Read statistics for the virtqueue at index 1 $ vdpa dev vstats show vdpa-a qidx 1 vdpa-a: queue_type tx queue_index 1 received_desc 3844836 completed_desc 3844836 2. Read statistics for the virtqueue at index 32 $ vdpa dev vstats show vdpa-a qidx 32 vdpa-a: queue_type control_vq queue_index 32 received_desc 62 completed_desc 62 3. Read statisitics for the virtqueue at index 0 with json output $ vdpa -j dev vstats show vdpa-a qidx 0 {"vstats":{"vdpa-a":{ "queue_type":"rx","queue_index":0,"name":"received_desc","value":417776,\ "name":"completed_desc","value":417548}}} 4. Read statistics for the virtqueue at index 0 with preety json output $ vdpa -jp dev vstats show vdpa-a qidx 0 { "vstats": { "vdpa-a": { "queue_type": "rx", "queue_index": 0, "name": "received_desc", "value": 417776, "name": "completed_desc", "value": 417548 } } } Signed-off-by: Eli Cohen <elic@nvidia.com> Message-Id: <20220518133804.1075129-3-elic@nvidia.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-05-18 13:38:00 +00:00
static int vdpa_fill_stats_rec(struct vdpa_device *vdev, struct sk_buff *msg,
struct genl_info *info, u32 index)
{
struct virtio_net_config config = {};
u64 features;
u16 max_vqp;
u8 status;
int err;
status = vdev->config->get_status(vdev);
if (!(status & VIRTIO_CONFIG_S_FEATURES_OK)) {
NL_SET_ERR_MSG_MOD(info->extack, "feature negotiation not complete");
return -EAGAIN;
}
vdpa_get_config_unlocked(vdev, 0, &config, sizeof(config));
max_vqp = le16_to_cpu(config.max_virtqueue_pairs);
if (nla_put_u16(msg, VDPA_ATTR_DEV_NET_CFG_MAX_VQP, max_vqp))
return -EMSGSIZE;
features = vdev->config->get_driver_features(vdev);
if (nla_put_u64_64bit(msg, VDPA_ATTR_DEV_NEGOTIATED_FEATURES,
features, VDPA_ATTR_PAD))
return -EMSGSIZE;
if (nla_put_u32(msg, VDPA_ATTR_DEV_QUEUE_INDEX, index))
return -EMSGSIZE;
err = vdev->config->get_vendor_vq_stats(vdev, index, msg, info->extack);
if (err)
return err;
return 0;
}
static int vendor_stats_fill(struct vdpa_device *vdev, struct sk_buff *msg,
struct genl_info *info, u32 index)
{
int err;
down_read(&vdev->cf_lock);
vdpa: Add support for querying vendor statistics Allows to read vendor statistics of a vdpa device. The specific statistics data are received from the upstream driver in the form of an (attribute name, attribute value) pairs. An example of statistics for mlx5_vdpa device are: received_desc - number of descriptors received by the virtqueue completed_desc - number of descriptors completed by the virtqueue A descriptor using indirect buffers is still counted as 1. In addition, N chained descriptors are counted correctly N times as one would expect. A new callback was added to vdpa_config_ops which provides the means for the vdpa driver to return statistics results. The interface allows for reading all the supported virtqueues, including the control virtqueue if it exists. Below are some examples taken from mlx5_vdpa which are introduced in the following patch: 1. Read statistics for the virtqueue at index 1 $ vdpa dev vstats show vdpa-a qidx 1 vdpa-a: queue_type tx queue_index 1 received_desc 3844836 completed_desc 3844836 2. Read statistics for the virtqueue at index 32 $ vdpa dev vstats show vdpa-a qidx 32 vdpa-a: queue_type control_vq queue_index 32 received_desc 62 completed_desc 62 3. Read statisitics for the virtqueue at index 0 with json output $ vdpa -j dev vstats show vdpa-a qidx 0 {"vstats":{"vdpa-a":{ "queue_type":"rx","queue_index":0,"name":"received_desc","value":417776,\ "name":"completed_desc","value":417548}}} 4. Read statistics for the virtqueue at index 0 with preety json output $ vdpa -jp dev vstats show vdpa-a qidx 0 { "vstats": { "vdpa-a": { "queue_type": "rx", "queue_index": 0, "name": "received_desc", "value": 417776, "name": "completed_desc", "value": 417548 } } } Signed-off-by: Eli Cohen <elic@nvidia.com> Message-Id: <20220518133804.1075129-3-elic@nvidia.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-05-18 13:38:00 +00:00
if (!vdev->config->get_vendor_vq_stats) {
err = -EOPNOTSUPP;
goto out;
}
err = vdpa_fill_stats_rec(vdev, msg, info, index);
out:
up_read(&vdev->cf_lock);
vdpa: Add support for querying vendor statistics Allows to read vendor statistics of a vdpa device. The specific statistics data are received from the upstream driver in the form of an (attribute name, attribute value) pairs. An example of statistics for mlx5_vdpa device are: received_desc - number of descriptors received by the virtqueue completed_desc - number of descriptors completed by the virtqueue A descriptor using indirect buffers is still counted as 1. In addition, N chained descriptors are counted correctly N times as one would expect. A new callback was added to vdpa_config_ops which provides the means for the vdpa driver to return statistics results. The interface allows for reading all the supported virtqueues, including the control virtqueue if it exists. Below are some examples taken from mlx5_vdpa which are introduced in the following patch: 1. Read statistics for the virtqueue at index 1 $ vdpa dev vstats show vdpa-a qidx 1 vdpa-a: queue_type tx queue_index 1 received_desc 3844836 completed_desc 3844836 2. Read statistics for the virtqueue at index 32 $ vdpa dev vstats show vdpa-a qidx 32 vdpa-a: queue_type control_vq queue_index 32 received_desc 62 completed_desc 62 3. Read statisitics for the virtqueue at index 0 with json output $ vdpa -j dev vstats show vdpa-a qidx 0 {"vstats":{"vdpa-a":{ "queue_type":"rx","queue_index":0,"name":"received_desc","value":417776,\ "name":"completed_desc","value":417548}}} 4. Read statistics for the virtqueue at index 0 with preety json output $ vdpa -jp dev vstats show vdpa-a qidx 0 { "vstats": { "vdpa-a": { "queue_type": "rx", "queue_index": 0, "name": "received_desc", "value": 417776, "name": "completed_desc", "value": 417548 } } } Signed-off-by: Eli Cohen <elic@nvidia.com> Message-Id: <20220518133804.1075129-3-elic@nvidia.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-05-18 13:38:00 +00:00
return err;
}
static int vdpa_dev_vendor_stats_fill(struct vdpa_device *vdev,
struct sk_buff *msg,
struct genl_info *info, u32 index)
{
u32 device_id;
void *hdr;
int err;
u32 portid = info->snd_portid;
u32 seq = info->snd_seq;
u32 flags = 0;
hdr = genlmsg_put(msg, portid, seq, &vdpa_nl_family, flags,
VDPA_CMD_DEV_VSTATS_GET);
if (!hdr)
return -EMSGSIZE;
if (nla_put_string(msg, VDPA_ATTR_DEV_NAME, dev_name(&vdev->dev))) {
err = -EMSGSIZE;
goto undo_msg;
}
device_id = vdev->config->get_device_id(vdev);
if (nla_put_u32(msg, VDPA_ATTR_DEV_ID, device_id)) {
err = -EMSGSIZE;
goto undo_msg;
}
switch (device_id) {
case VIRTIO_ID_NET:
if (index > VIRTIO_NET_CTRL_MQ_VQ_PAIRS_MAX) {
NL_SET_ERR_MSG_MOD(info->extack, "queue index excceeds max value");
err = -ERANGE;
break;
}
err = vendor_stats_fill(vdev, msg, info, index);
break;
default:
err = -EOPNOTSUPP;
break;
}
genlmsg_end(msg, hdr);
return err;
undo_msg:
genlmsg_cancel(msg, hdr);
return err;
}
static int vdpa_nl_cmd_dev_config_get_doit(struct sk_buff *skb, struct genl_info *info)
{
struct vdpa_device *vdev;
struct sk_buff *msg;
const char *devname;
struct device *dev;
int err;
if (!info->attrs[VDPA_ATTR_DEV_NAME])
return -EINVAL;
devname = nla_data(info->attrs[VDPA_ATTR_DEV_NAME]);
msg = nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_KERNEL);
if (!msg)
return -ENOMEM;
down_read(&vdpa_dev_lock);
dev = bus_find_device(&vdpa_bus, NULL, devname, vdpa_name_match);
if (!dev) {
NL_SET_ERR_MSG_MOD(info->extack, "device not found");
err = -ENODEV;
goto dev_err;
}
vdev = container_of(dev, struct vdpa_device, dev);
if (!vdev->mdev) {
NL_SET_ERR_MSG_MOD(info->extack, "unmanaged vdpa device");
err = -EINVAL;
goto mdev_err;
}
err = vdpa_dev_config_fill(vdev, msg, info->snd_portid, info->snd_seq,
0, info->extack);
if (!err)
err = genlmsg_reply(msg, info);
mdev_err:
put_device(dev);
dev_err:
up_read(&vdpa_dev_lock);
if (err)
nlmsg_free(msg);
return err;
}
static int vdpa_dev_config_dump(struct device *dev, void *data)
{
struct vdpa_device *vdev = container_of(dev, struct vdpa_device, dev);
struct vdpa_dev_dump_info *info = data;
int err;
if (!vdev->mdev)
return 0;
if (info->idx < info->start_idx) {
info->idx++;
return 0;
}
err = vdpa_dev_config_fill(vdev, info->msg, NETLINK_CB(info->cb->skb).portid,
info->cb->nlh->nlmsg_seq, NLM_F_MULTI,
info->cb->extack);
if (err)
return err;
info->idx++;
return 0;
}
static int
vdpa_nl_cmd_dev_config_get_dumpit(struct sk_buff *msg, struct netlink_callback *cb)
{
struct vdpa_dev_dump_info info;
info.msg = msg;
info.cb = cb;
info.start_idx = cb->args[0];
info.idx = 0;
down_read(&vdpa_dev_lock);
bus_for_each_dev(&vdpa_bus, NULL, &info, vdpa_dev_config_dump);
up_read(&vdpa_dev_lock);
cb->args[0] = info.idx;
return msg->len;
}
vdpa: Add support for querying vendor statistics Allows to read vendor statistics of a vdpa device. The specific statistics data are received from the upstream driver in the form of an (attribute name, attribute value) pairs. An example of statistics for mlx5_vdpa device are: received_desc - number of descriptors received by the virtqueue completed_desc - number of descriptors completed by the virtqueue A descriptor using indirect buffers is still counted as 1. In addition, N chained descriptors are counted correctly N times as one would expect. A new callback was added to vdpa_config_ops which provides the means for the vdpa driver to return statistics results. The interface allows for reading all the supported virtqueues, including the control virtqueue if it exists. Below are some examples taken from mlx5_vdpa which are introduced in the following patch: 1. Read statistics for the virtqueue at index 1 $ vdpa dev vstats show vdpa-a qidx 1 vdpa-a: queue_type tx queue_index 1 received_desc 3844836 completed_desc 3844836 2. Read statistics for the virtqueue at index 32 $ vdpa dev vstats show vdpa-a qidx 32 vdpa-a: queue_type control_vq queue_index 32 received_desc 62 completed_desc 62 3. Read statisitics for the virtqueue at index 0 with json output $ vdpa -j dev vstats show vdpa-a qidx 0 {"vstats":{"vdpa-a":{ "queue_type":"rx","queue_index":0,"name":"received_desc","value":417776,\ "name":"completed_desc","value":417548}}} 4. Read statistics for the virtqueue at index 0 with preety json output $ vdpa -jp dev vstats show vdpa-a qidx 0 { "vstats": { "vdpa-a": { "queue_type": "rx", "queue_index": 0, "name": "received_desc", "value": 417776, "name": "completed_desc", "value": 417548 } } } Signed-off-by: Eli Cohen <elic@nvidia.com> Message-Id: <20220518133804.1075129-3-elic@nvidia.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-05-18 13:38:00 +00:00
static int vdpa_nl_cmd_dev_stats_get_doit(struct sk_buff *skb,
struct genl_info *info)
{
struct vdpa_device *vdev;
struct sk_buff *msg;
const char *devname;
struct device *dev;
u32 index;
int err;
if (!info->attrs[VDPA_ATTR_DEV_NAME])
return -EINVAL;
if (!info->attrs[VDPA_ATTR_DEV_QUEUE_INDEX])
return -EINVAL;
devname = nla_data(info->attrs[VDPA_ATTR_DEV_NAME]);
msg = nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_KERNEL);
if (!msg)
return -ENOMEM;
index = nla_get_u32(info->attrs[VDPA_ATTR_DEV_QUEUE_INDEX]);
down_read(&vdpa_dev_lock);
vdpa: Add support for querying vendor statistics Allows to read vendor statistics of a vdpa device. The specific statistics data are received from the upstream driver in the form of an (attribute name, attribute value) pairs. An example of statistics for mlx5_vdpa device are: received_desc - number of descriptors received by the virtqueue completed_desc - number of descriptors completed by the virtqueue A descriptor using indirect buffers is still counted as 1. In addition, N chained descriptors are counted correctly N times as one would expect. A new callback was added to vdpa_config_ops which provides the means for the vdpa driver to return statistics results. The interface allows for reading all the supported virtqueues, including the control virtqueue if it exists. Below are some examples taken from mlx5_vdpa which are introduced in the following patch: 1. Read statistics for the virtqueue at index 1 $ vdpa dev vstats show vdpa-a qidx 1 vdpa-a: queue_type tx queue_index 1 received_desc 3844836 completed_desc 3844836 2. Read statistics for the virtqueue at index 32 $ vdpa dev vstats show vdpa-a qidx 32 vdpa-a: queue_type control_vq queue_index 32 received_desc 62 completed_desc 62 3. Read statisitics for the virtqueue at index 0 with json output $ vdpa -j dev vstats show vdpa-a qidx 0 {"vstats":{"vdpa-a":{ "queue_type":"rx","queue_index":0,"name":"received_desc","value":417776,\ "name":"completed_desc","value":417548}}} 4. Read statistics for the virtqueue at index 0 with preety json output $ vdpa -jp dev vstats show vdpa-a qidx 0 { "vstats": { "vdpa-a": { "queue_type": "rx", "queue_index": 0, "name": "received_desc", "value": 417776, "name": "completed_desc", "value": 417548 } } } Signed-off-by: Eli Cohen <elic@nvidia.com> Message-Id: <20220518133804.1075129-3-elic@nvidia.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-05-18 13:38:00 +00:00
dev = bus_find_device(&vdpa_bus, NULL, devname, vdpa_name_match);
if (!dev) {
NL_SET_ERR_MSG_MOD(info->extack, "device not found");
err = -ENODEV;
goto dev_err;
}
vdev = container_of(dev, struct vdpa_device, dev);
if (!vdev->mdev) {
NL_SET_ERR_MSG_MOD(info->extack, "unmanaged vdpa device");
err = -EINVAL;
goto mdev_err;
}
err = vdpa_dev_vendor_stats_fill(vdev, msg, info, index);
if (err)
goto mdev_err;
err = genlmsg_reply(msg, info);
put_device(dev);
up_read(&vdpa_dev_lock);
vdpa: Add support for querying vendor statistics Allows to read vendor statistics of a vdpa device. The specific statistics data are received from the upstream driver in the form of an (attribute name, attribute value) pairs. An example of statistics for mlx5_vdpa device are: received_desc - number of descriptors received by the virtqueue completed_desc - number of descriptors completed by the virtqueue A descriptor using indirect buffers is still counted as 1. In addition, N chained descriptors are counted correctly N times as one would expect. A new callback was added to vdpa_config_ops which provides the means for the vdpa driver to return statistics results. The interface allows for reading all the supported virtqueues, including the control virtqueue if it exists. Below are some examples taken from mlx5_vdpa which are introduced in the following patch: 1. Read statistics for the virtqueue at index 1 $ vdpa dev vstats show vdpa-a qidx 1 vdpa-a: queue_type tx queue_index 1 received_desc 3844836 completed_desc 3844836 2. Read statistics for the virtqueue at index 32 $ vdpa dev vstats show vdpa-a qidx 32 vdpa-a: queue_type control_vq queue_index 32 received_desc 62 completed_desc 62 3. Read statisitics for the virtqueue at index 0 with json output $ vdpa -j dev vstats show vdpa-a qidx 0 {"vstats":{"vdpa-a":{ "queue_type":"rx","queue_index":0,"name":"received_desc","value":417776,\ "name":"completed_desc","value":417548}}} 4. Read statistics for the virtqueue at index 0 with preety json output $ vdpa -jp dev vstats show vdpa-a qidx 0 { "vstats": { "vdpa-a": { "queue_type": "rx", "queue_index": 0, "name": "received_desc", "value": 417776, "name": "completed_desc", "value": 417548 } } } Signed-off-by: Eli Cohen <elic@nvidia.com> Message-Id: <20220518133804.1075129-3-elic@nvidia.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-05-18 13:38:00 +00:00
return err;
mdev_err:
put_device(dev);
dev_err:
nlmsg_free(msg);
up_read(&vdpa_dev_lock);
vdpa: Add support for querying vendor statistics Allows to read vendor statistics of a vdpa device. The specific statistics data are received from the upstream driver in the form of an (attribute name, attribute value) pairs. An example of statistics for mlx5_vdpa device are: received_desc - number of descriptors received by the virtqueue completed_desc - number of descriptors completed by the virtqueue A descriptor using indirect buffers is still counted as 1. In addition, N chained descriptors are counted correctly N times as one would expect. A new callback was added to vdpa_config_ops which provides the means for the vdpa driver to return statistics results. The interface allows for reading all the supported virtqueues, including the control virtqueue if it exists. Below are some examples taken from mlx5_vdpa which are introduced in the following patch: 1. Read statistics for the virtqueue at index 1 $ vdpa dev vstats show vdpa-a qidx 1 vdpa-a: queue_type tx queue_index 1 received_desc 3844836 completed_desc 3844836 2. Read statistics for the virtqueue at index 32 $ vdpa dev vstats show vdpa-a qidx 32 vdpa-a: queue_type control_vq queue_index 32 received_desc 62 completed_desc 62 3. Read statisitics for the virtqueue at index 0 with json output $ vdpa -j dev vstats show vdpa-a qidx 0 {"vstats":{"vdpa-a":{ "queue_type":"rx","queue_index":0,"name":"received_desc","value":417776,\ "name":"completed_desc","value":417548}}} 4. Read statistics for the virtqueue at index 0 with preety json output $ vdpa -jp dev vstats show vdpa-a qidx 0 { "vstats": { "vdpa-a": { "queue_type": "rx", "queue_index": 0, "name": "received_desc", "value": 417776, "name": "completed_desc", "value": 417548 } } } Signed-off-by: Eli Cohen <elic@nvidia.com> Message-Id: <20220518133804.1075129-3-elic@nvidia.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-05-18 13:38:00 +00:00
return err;
}
vdpa: Define vdpa mgmt device, ops and a netlink interface To add one or more VDPA devices, define a management device which allows adding or removing vdpa device. A management device defines set of callbacks to manage vdpa devices. To begin with, it defines add and remove callbacks through which a user defined vdpa device can be added or removed. A unique management device is identified by its unique handle identified by management device name and optionally the bus name. Hence, introduce routine through which driver can register a management device and its callback operations for adding and remove a vdpa device. Introduce vdpa netlink socket family so that user can query management device and its attributes. Example of show vdpa management device which allows creating vdpa device of networking class (device id = 0x1) of virtio specification 1.1 section 5.1.1. $ vdpa mgmtdev show vdpasim_net: supported_classes: net Example of showing vdpa management device in JSON format. $ vdpa mgmtdev show -jp { "show": { "vdpasim_net": { "supported_classes": [ "net" ] } } } Signed-off-by: Parav Pandit <parav@nvidia.com> Reviewed-by: Eli Cohen <elic@nvidia.com> Reviewed-by: Jason Wang <jasowang@redhat.com> Link: https://lore.kernel.org/r/20210105103203.82508-4-parav@nvidia.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Including a bugfix: vpda: correctly size vdpa_nl_policy We need to ensure last entry of vdpa_nl_policy[] is zero, otherwise out-of-bounds access is hurting us. Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Cc: Parav Pandit <parav@nvidia.com> Cc: Eli Cohen <elic@nvidia.com> Cc: Jason Wang <jasowang@redhat.com> Cc: Michael S. Tsirkin <mst@redhat.com> Link: https://lore.kernel.org/r/20210210134911.4119555-1-eric.dumazet@gmail.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-01-05 10:32:00 +00:00
static const struct nla_policy vdpa_nl_policy[VDPA_ATTR_MAX + 1] = {
[VDPA_ATTR_MGMTDEV_BUS_NAME] = { .type = NLA_NUL_STRING },
[VDPA_ATTR_MGMTDEV_DEV_NAME] = { .type = NLA_STRING },
[VDPA_ATTR_DEV_NAME] = { .type = NLA_STRING },
[VDPA_ATTR_DEV_NET_CFG_MACADDR] = NLA_POLICY_ETH_ADDR,
/* virtio spec 1.1 section 5.1.4.1 for valid MTU range */
[VDPA_ATTR_DEV_NET_CFG_MTU] = NLA_POLICY_MIN(NLA_U16, 68),
vdpa: Define vdpa mgmt device, ops and a netlink interface To add one or more VDPA devices, define a management device which allows adding or removing vdpa device. A management device defines set of callbacks to manage vdpa devices. To begin with, it defines add and remove callbacks through which a user defined vdpa device can be added or removed. A unique management device is identified by its unique handle identified by management device name and optionally the bus name. Hence, introduce routine through which driver can register a management device and its callback operations for adding and remove a vdpa device. Introduce vdpa netlink socket family so that user can query management device and its attributes. Example of show vdpa management device which allows creating vdpa device of networking class (device id = 0x1) of virtio specification 1.1 section 5.1.1. $ vdpa mgmtdev show vdpasim_net: supported_classes: net Example of showing vdpa management device in JSON format. $ vdpa mgmtdev show -jp { "show": { "vdpasim_net": { "supported_classes": [ "net" ] } } } Signed-off-by: Parav Pandit <parav@nvidia.com> Reviewed-by: Eli Cohen <elic@nvidia.com> Reviewed-by: Jason Wang <jasowang@redhat.com> Link: https://lore.kernel.org/r/20210105103203.82508-4-parav@nvidia.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Including a bugfix: vpda: correctly size vdpa_nl_policy We need to ensure last entry of vdpa_nl_policy[] is zero, otherwise out-of-bounds access is hurting us. Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Cc: Parav Pandit <parav@nvidia.com> Cc: Eli Cohen <elic@nvidia.com> Cc: Jason Wang <jasowang@redhat.com> Cc: Michael S. Tsirkin <mst@redhat.com> Link: https://lore.kernel.org/r/20210210134911.4119555-1-eric.dumazet@gmail.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-01-05 10:32:00 +00:00
};
static const struct genl_ops vdpa_nl_ops[] = {
{
.cmd = VDPA_CMD_MGMTDEV_GET,
.validate = GENL_DONT_VALIDATE_STRICT | GENL_DONT_VALIDATE_DUMP,
.doit = vdpa_nl_cmd_mgmtdev_get_doit,
.dumpit = vdpa_nl_cmd_mgmtdev_get_dumpit,
},
{
.cmd = VDPA_CMD_DEV_NEW,
.validate = GENL_DONT_VALIDATE_STRICT | GENL_DONT_VALIDATE_DUMP,
.doit = vdpa_nl_cmd_dev_add_set_doit,
.flags = GENL_ADMIN_PERM,
},
{
.cmd = VDPA_CMD_DEV_DEL,
.validate = GENL_DONT_VALIDATE_STRICT | GENL_DONT_VALIDATE_DUMP,
.doit = vdpa_nl_cmd_dev_del_set_doit,
.flags = GENL_ADMIN_PERM,
},
{
.cmd = VDPA_CMD_DEV_GET,
.validate = GENL_DONT_VALIDATE_STRICT | GENL_DONT_VALIDATE_DUMP,
.doit = vdpa_nl_cmd_dev_get_doit,
.dumpit = vdpa_nl_cmd_dev_get_dumpit,
},
{
.cmd = VDPA_CMD_DEV_CONFIG_GET,
.validate = GENL_DONT_VALIDATE_STRICT | GENL_DONT_VALIDATE_DUMP,
.doit = vdpa_nl_cmd_dev_config_get_doit,
.dumpit = vdpa_nl_cmd_dev_config_get_dumpit,
},
vdpa: Add support for querying vendor statistics Allows to read vendor statistics of a vdpa device. The specific statistics data are received from the upstream driver in the form of an (attribute name, attribute value) pairs. An example of statistics for mlx5_vdpa device are: received_desc - number of descriptors received by the virtqueue completed_desc - number of descriptors completed by the virtqueue A descriptor using indirect buffers is still counted as 1. In addition, N chained descriptors are counted correctly N times as one would expect. A new callback was added to vdpa_config_ops which provides the means for the vdpa driver to return statistics results. The interface allows for reading all the supported virtqueues, including the control virtqueue if it exists. Below are some examples taken from mlx5_vdpa which are introduced in the following patch: 1. Read statistics for the virtqueue at index 1 $ vdpa dev vstats show vdpa-a qidx 1 vdpa-a: queue_type tx queue_index 1 received_desc 3844836 completed_desc 3844836 2. Read statistics for the virtqueue at index 32 $ vdpa dev vstats show vdpa-a qidx 32 vdpa-a: queue_type control_vq queue_index 32 received_desc 62 completed_desc 62 3. Read statisitics for the virtqueue at index 0 with json output $ vdpa -j dev vstats show vdpa-a qidx 0 {"vstats":{"vdpa-a":{ "queue_type":"rx","queue_index":0,"name":"received_desc","value":417776,\ "name":"completed_desc","value":417548}}} 4. Read statistics for the virtqueue at index 0 with preety json output $ vdpa -jp dev vstats show vdpa-a qidx 0 { "vstats": { "vdpa-a": { "queue_type": "rx", "queue_index": 0, "name": "received_desc", "value": 417776, "name": "completed_desc", "value": 417548 } } } Signed-off-by: Eli Cohen <elic@nvidia.com> Message-Id: <20220518133804.1075129-3-elic@nvidia.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-05-18 13:38:00 +00:00
{
.cmd = VDPA_CMD_DEV_VSTATS_GET,
.validate = GENL_DONT_VALIDATE_STRICT | GENL_DONT_VALIDATE_DUMP,
.doit = vdpa_nl_cmd_dev_stats_get_doit,
.flags = GENL_ADMIN_PERM,
},
vdpa: Define vdpa mgmt device, ops and a netlink interface To add one or more VDPA devices, define a management device which allows adding or removing vdpa device. A management device defines set of callbacks to manage vdpa devices. To begin with, it defines add and remove callbacks through which a user defined vdpa device can be added or removed. A unique management device is identified by its unique handle identified by management device name and optionally the bus name. Hence, introduce routine through which driver can register a management device and its callback operations for adding and remove a vdpa device. Introduce vdpa netlink socket family so that user can query management device and its attributes. Example of show vdpa management device which allows creating vdpa device of networking class (device id = 0x1) of virtio specification 1.1 section 5.1.1. $ vdpa mgmtdev show vdpasim_net: supported_classes: net Example of showing vdpa management device in JSON format. $ vdpa mgmtdev show -jp { "show": { "vdpasim_net": { "supported_classes": [ "net" ] } } } Signed-off-by: Parav Pandit <parav@nvidia.com> Reviewed-by: Eli Cohen <elic@nvidia.com> Reviewed-by: Jason Wang <jasowang@redhat.com> Link: https://lore.kernel.org/r/20210105103203.82508-4-parav@nvidia.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Including a bugfix: vpda: correctly size vdpa_nl_policy We need to ensure last entry of vdpa_nl_policy[] is zero, otherwise out-of-bounds access is hurting us. Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Cc: Parav Pandit <parav@nvidia.com> Cc: Eli Cohen <elic@nvidia.com> Cc: Jason Wang <jasowang@redhat.com> Cc: Michael S. Tsirkin <mst@redhat.com> Link: https://lore.kernel.org/r/20210210134911.4119555-1-eric.dumazet@gmail.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-01-05 10:32:00 +00:00
};
static struct genl_family vdpa_nl_family __ro_after_init = {
.name = VDPA_GENL_NAME,
.version = VDPA_GENL_VERSION,
.maxattr = VDPA_ATTR_MAX,
.policy = vdpa_nl_policy,
.netnsok = false,
.module = THIS_MODULE,
.ops = vdpa_nl_ops,
.n_ops = ARRAY_SIZE(vdpa_nl_ops),
};
vDPA: introduce vDPA bus vDPA device is a device that uses a datapath which complies with the virtio specifications with vendor specific control path. vDPA devices can be both physically located on the hardware or emulated by software. vDPA hardware devices are usually implemented through PCIE with the following types: - PF (Physical Function) - A single Physical Function - VF (Virtual Function) - Device that supports single root I/O virtualization (SR-IOV). Its Virtual Function (VF) represents a virtualized instance of the device that can be assigned to different partitions - ADI (Assignable Device Interface) and its equivalents - With technologies such as Intel Scalable IOV, a virtual device (VDEV) composed by host OS utilizing one or more ADIs. Or its equivalent like SF (Sub function) from Mellanox. >From a driver's perspective, depends on how and where the DMA translation is done, vDPA devices are split into two types: - Platform specific DMA translation - From the driver's perspective, the device can be used on a platform where device access to data in memory is limited and/or translated. An example is a PCIE vDPA whose DMA request was tagged via a bus (e.g PCIE) specific way. DMA translation and protection are done at PCIE bus IOMMU level. - Device specific DMA translation - The device implements DMA isolation and protection through its own logic. An example is a vDPA device which uses on-chip IOMMU. To hide the differences and complexity of the above types for a vDPA device/IOMMU options and in order to present a generic virtio device to the upper layer, a device agnostic framework is required. This patch introduces a software vDPA bus which abstracts the common attributes of vDPA device, vDPA bus driver and the communication method (vdpa_config_ops) between the vDPA device abstraction and the vDPA bus driver. This allows multiple types of drivers to be used for vDPA device like the virtio_vdpa and vhost_vdpa driver to operate on the bus and allow vDPA device could be used by either kernel virtio driver or userspace vhost drivers as: virtio drivers vhost drivers | | [virtio bus] [vhost uAPI] | | virtio device vhost device virtio_vdpa drv vhost_vdpa drv \ / [vDPA bus] | vDPA device hardware drv | [hardware bus] | vDPA hardware With the abstraction of vDPA bus and vDPA bus operations, the difference and complexity of the under layer hardware is hidden from upper layer. The vDPA bus drivers on top can use a unified vdpa_config_ops to control different types of vDPA device. Signed-off-by: Jason Wang <jasowang@redhat.com> Link: https://lore.kernel.org/r/20200326140125.19794-6-jasowang@redhat.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-03-26 14:01:21 +00:00
static int vdpa_init(void)
{
vdpa: Define vdpa mgmt device, ops and a netlink interface To add one or more VDPA devices, define a management device which allows adding or removing vdpa device. A management device defines set of callbacks to manage vdpa devices. To begin with, it defines add and remove callbacks through which a user defined vdpa device can be added or removed. A unique management device is identified by its unique handle identified by management device name and optionally the bus name. Hence, introduce routine through which driver can register a management device and its callback operations for adding and remove a vdpa device. Introduce vdpa netlink socket family so that user can query management device and its attributes. Example of show vdpa management device which allows creating vdpa device of networking class (device id = 0x1) of virtio specification 1.1 section 5.1.1. $ vdpa mgmtdev show vdpasim_net: supported_classes: net Example of showing vdpa management device in JSON format. $ vdpa mgmtdev show -jp { "show": { "vdpasim_net": { "supported_classes": [ "net" ] } } } Signed-off-by: Parav Pandit <parav@nvidia.com> Reviewed-by: Eli Cohen <elic@nvidia.com> Reviewed-by: Jason Wang <jasowang@redhat.com> Link: https://lore.kernel.org/r/20210105103203.82508-4-parav@nvidia.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Including a bugfix: vpda: correctly size vdpa_nl_policy We need to ensure last entry of vdpa_nl_policy[] is zero, otherwise out-of-bounds access is hurting us. Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Cc: Parav Pandit <parav@nvidia.com> Cc: Eli Cohen <elic@nvidia.com> Cc: Jason Wang <jasowang@redhat.com> Cc: Michael S. Tsirkin <mst@redhat.com> Link: https://lore.kernel.org/r/20210210134911.4119555-1-eric.dumazet@gmail.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-01-05 10:32:00 +00:00
int err;
err = bus_register(&vdpa_bus);
if (err)
return err;
err = genl_register_family(&vdpa_nl_family);
if (err)
goto err;
return 0;
err:
bus_unregister(&vdpa_bus);
return err;
vDPA: introduce vDPA bus vDPA device is a device that uses a datapath which complies with the virtio specifications with vendor specific control path. vDPA devices can be both physically located on the hardware or emulated by software. vDPA hardware devices are usually implemented through PCIE with the following types: - PF (Physical Function) - A single Physical Function - VF (Virtual Function) - Device that supports single root I/O virtualization (SR-IOV). Its Virtual Function (VF) represents a virtualized instance of the device that can be assigned to different partitions - ADI (Assignable Device Interface) and its equivalents - With technologies such as Intel Scalable IOV, a virtual device (VDEV) composed by host OS utilizing one or more ADIs. Or its equivalent like SF (Sub function) from Mellanox. >From a driver's perspective, depends on how and where the DMA translation is done, vDPA devices are split into two types: - Platform specific DMA translation - From the driver's perspective, the device can be used on a platform where device access to data in memory is limited and/or translated. An example is a PCIE vDPA whose DMA request was tagged via a bus (e.g PCIE) specific way. DMA translation and protection are done at PCIE bus IOMMU level. - Device specific DMA translation - The device implements DMA isolation and protection through its own logic. An example is a vDPA device which uses on-chip IOMMU. To hide the differences and complexity of the above types for a vDPA device/IOMMU options and in order to present a generic virtio device to the upper layer, a device agnostic framework is required. This patch introduces a software vDPA bus which abstracts the common attributes of vDPA device, vDPA bus driver and the communication method (vdpa_config_ops) between the vDPA device abstraction and the vDPA bus driver. This allows multiple types of drivers to be used for vDPA device like the virtio_vdpa and vhost_vdpa driver to operate on the bus and allow vDPA device could be used by either kernel virtio driver or userspace vhost drivers as: virtio drivers vhost drivers | | [virtio bus] [vhost uAPI] | | virtio device vhost device virtio_vdpa drv vhost_vdpa drv \ / [vDPA bus] | vDPA device hardware drv | [hardware bus] | vDPA hardware With the abstraction of vDPA bus and vDPA bus operations, the difference and complexity of the under layer hardware is hidden from upper layer. The vDPA bus drivers on top can use a unified vdpa_config_ops to control different types of vDPA device. Signed-off-by: Jason Wang <jasowang@redhat.com> Link: https://lore.kernel.org/r/20200326140125.19794-6-jasowang@redhat.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-03-26 14:01:21 +00:00
}
static void __exit vdpa_exit(void)
{
vdpa: Define vdpa mgmt device, ops and a netlink interface To add one or more VDPA devices, define a management device which allows adding or removing vdpa device. A management device defines set of callbacks to manage vdpa devices. To begin with, it defines add and remove callbacks through which a user defined vdpa device can be added or removed. A unique management device is identified by its unique handle identified by management device name and optionally the bus name. Hence, introduce routine through which driver can register a management device and its callback operations for adding and remove a vdpa device. Introduce vdpa netlink socket family so that user can query management device and its attributes. Example of show vdpa management device which allows creating vdpa device of networking class (device id = 0x1) of virtio specification 1.1 section 5.1.1. $ vdpa mgmtdev show vdpasim_net: supported_classes: net Example of showing vdpa management device in JSON format. $ vdpa mgmtdev show -jp { "show": { "vdpasim_net": { "supported_classes": [ "net" ] } } } Signed-off-by: Parav Pandit <parav@nvidia.com> Reviewed-by: Eli Cohen <elic@nvidia.com> Reviewed-by: Jason Wang <jasowang@redhat.com> Link: https://lore.kernel.org/r/20210105103203.82508-4-parav@nvidia.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Including a bugfix: vpda: correctly size vdpa_nl_policy We need to ensure last entry of vdpa_nl_policy[] is zero, otherwise out-of-bounds access is hurting us. Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Cc: Parav Pandit <parav@nvidia.com> Cc: Eli Cohen <elic@nvidia.com> Cc: Jason Wang <jasowang@redhat.com> Cc: Michael S. Tsirkin <mst@redhat.com> Link: https://lore.kernel.org/r/20210210134911.4119555-1-eric.dumazet@gmail.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-01-05 10:32:00 +00:00
genl_unregister_family(&vdpa_nl_family);
vDPA: introduce vDPA bus vDPA device is a device that uses a datapath which complies with the virtio specifications with vendor specific control path. vDPA devices can be both physically located on the hardware or emulated by software. vDPA hardware devices are usually implemented through PCIE with the following types: - PF (Physical Function) - A single Physical Function - VF (Virtual Function) - Device that supports single root I/O virtualization (SR-IOV). Its Virtual Function (VF) represents a virtualized instance of the device that can be assigned to different partitions - ADI (Assignable Device Interface) and its equivalents - With technologies such as Intel Scalable IOV, a virtual device (VDEV) composed by host OS utilizing one or more ADIs. Or its equivalent like SF (Sub function) from Mellanox. >From a driver's perspective, depends on how and where the DMA translation is done, vDPA devices are split into two types: - Platform specific DMA translation - From the driver's perspective, the device can be used on a platform where device access to data in memory is limited and/or translated. An example is a PCIE vDPA whose DMA request was tagged via a bus (e.g PCIE) specific way. DMA translation and protection are done at PCIE bus IOMMU level. - Device specific DMA translation - The device implements DMA isolation and protection through its own logic. An example is a vDPA device which uses on-chip IOMMU. To hide the differences and complexity of the above types for a vDPA device/IOMMU options and in order to present a generic virtio device to the upper layer, a device agnostic framework is required. This patch introduces a software vDPA bus which abstracts the common attributes of vDPA device, vDPA bus driver and the communication method (vdpa_config_ops) between the vDPA device abstraction and the vDPA bus driver. This allows multiple types of drivers to be used for vDPA device like the virtio_vdpa and vhost_vdpa driver to operate on the bus and allow vDPA device could be used by either kernel virtio driver or userspace vhost drivers as: virtio drivers vhost drivers | | [virtio bus] [vhost uAPI] | | virtio device vhost device virtio_vdpa drv vhost_vdpa drv \ / [vDPA bus] | vDPA device hardware drv | [hardware bus] | vDPA hardware With the abstraction of vDPA bus and vDPA bus operations, the difference and complexity of the under layer hardware is hidden from upper layer. The vDPA bus drivers on top can use a unified vdpa_config_ops to control different types of vDPA device. Signed-off-by: Jason Wang <jasowang@redhat.com> Link: https://lore.kernel.org/r/20200326140125.19794-6-jasowang@redhat.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-03-26 14:01:21 +00:00
bus_unregister(&vdpa_bus);
ida_destroy(&vdpa_index_ida);
}
core_initcall(vdpa_init);
module_exit(vdpa_exit);
MODULE_AUTHOR("Jason Wang <jasowang@redhat.com>");
MODULE_LICENSE("GPL v2");