Minki/linux
1
0
Fork 1
mirror of https://github.com/torvalds/linux.git synced 2024-11-07 12:41:55 +00:00
Code Issues Packages Projects Releases Wiki Activity
c89efa731e
linux/arch/arm/mach-omap2/powerdomain.h

278 lines
11 KiB
C
Raw Normal View History

ARM: OMAP2: Powerdomain: Add base OMAP2/3 powerdomain code This patch creates an interface to the powerdomain registers in the PRM/CM modules on OMAP2/3. This interface is intended to be used by PM code, e.g., pm.c; not by device drivers directly. Each powerdomain will be defined in later patches as static structures. Also defined are dependencies between powerdomains, used for adding and removing PM_WKDEP and CM_SLEEPDEP bits. The powerdomain structures are linked into a list at boot by pwrdm_register(), similar to the OMAP clock code. The patch adds a Kconfig option, CONFIG_OMAP_DEBUG_POWERDOMAIN, which when enabled will emit verbose debug messages via pr_debug(). Signed-off-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-08-19 08:08:40 +00:00
/*
OMAP4: powerdomains: add PRCM partition data; use OMAP4 PRM functions OMAP4 powerdomain control registers are split between the PRM hardware module and the PRCM_MPU local PRCM. Add this PRCM partition information to each OMAP4 powerdomain record, and convert the OMAP4 powerdomain function implementations to use the OMAP4 PRM instance functions. Also fixes a potential null pointer dereference of pwrdm->name. The autogeneration scripts have been updated. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Benoît Cousson <b-cousson@ti.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 04:05:14 +00:00
* OMAP2/3/4 powerdomain control
ARM: OMAP2: Powerdomain: Add base OMAP2/3 powerdomain code This patch creates an interface to the powerdomain registers in the PRM/CM modules on OMAP2/3. This interface is intended to be used by PM code, e.g., pm.c; not by device drivers directly. Each powerdomain will be defined in later patches as static structures. Also defined are dependencies between powerdomains, used for adding and removing PM_WKDEP and CM_SLEEPDEP bits. The powerdomain structures are linked into a list at boot by pwrdm_register(), similar to the OMAP clock code. The patch adds a Kconfig option, CONFIG_OMAP_DEBUG_POWERDOMAIN, which when enabled will emit verbose debug messages via pr_debug(). Signed-off-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-08-19 08:08:40 +00:00
*
OMAP2+: powerdomain: move header file from plat-omap to mach-omap2 The OMAP powerdomain code and data is all OMAP2+-specific. This seems unlikely to change any time soon. Move plat-omap/include/plat/powerdomain.h to mach-omap2/powerdomain.h. The primary point of doing this is to remove the temptation for unrelated upper-layer code to access powerdomain code and data directly. As part of this process, remove the references to powerdomain data from the GPIO "driver" and the OMAP PM no-op layer, both in plat-omap. Change the DSPBridge code to point to the new location for the powerdomain headers. The DSPBridge code should not be including the powerdomain headers; these should be removed. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Omar Ramirez Luna <omar.ramirez@ti.com> Cc: Felipe Contreras <felipe.contreras@gmail.com> Cc: Greg Kroah-Hartman <greg@kroah.com>
2010-12-22 04:05:16 +00:00
* Copyright (C) 2007-2008, 2010 Texas Instruments, Inc.
OMAP2+: powerdomain: add pwrdm_can_ever_lose_context() Some drivers wish to know whether the device that they control can ever lose context, for example, when the device's enclosing powerdomain loses power. They can use this information to determine whether it is necessary to save and restore device context, or whether it can be skipped. Implement the powerdomain portion of this by adding the function pwrdm_can_ever_lose_context(). This is not for use directly from driver code, but instead is intended to be called from driver-subarch integration code (i.e., arch/arm/*omap* code). Currently, the result from this function should be passed into the driver code via struct platform_data, but at some point this should be part of some common or OMAP-specific device code. While here, update file copyrights. Signed-off-by: Paul Walmsley <paul@pwsan.com>
2011-03-08 02:28:15 +00:00
* Copyright (C) 2007-2011 Nokia Corporation
ARM: OMAP2: Powerdomain: Add base OMAP2/3 powerdomain code This patch creates an interface to the powerdomain registers in the PRM/CM modules on OMAP2/3. This interface is intended to be used by PM code, e.g., pm.c; not by device drivers directly. Each powerdomain will be defined in later patches as static structures. Also defined are dependencies between powerdomains, used for adding and removing PM_WKDEP and CM_SLEEPDEP bits. The powerdomain structures are linked into a list at boot by pwrdm_register(), similar to the OMAP clock code. The patch adds a Kconfig option, CONFIG_OMAP_DEBUG_POWERDOMAIN, which when enabled will emit verbose debug messages via pr_debug(). Signed-off-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-08-19 08:08:40 +00:00
*
OMAP2+: powerdomain: move header file from plat-omap to mach-omap2 The OMAP powerdomain code and data is all OMAP2+-specific. This seems unlikely to change any time soon. Move plat-omap/include/plat/powerdomain.h to mach-omap2/powerdomain.h. The primary point of doing this is to remove the temptation for unrelated upper-layer code to access powerdomain code and data directly. As part of this process, remove the references to powerdomain data from the GPIO "driver" and the OMAP PM no-op layer, both in plat-omap. Change the DSPBridge code to point to the new location for the powerdomain headers. The DSPBridge code should not be including the powerdomain headers; these should be removed. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Omar Ramirez Luna <omar.ramirez@ti.com> Cc: Felipe Contreras <felipe.contreras@gmail.com> Cc: Greg Kroah-Hartman <greg@kroah.com>
2010-12-22 04:05:16 +00:00
* Paul Walmsley
ARM: OMAP2: Powerdomain: Add base OMAP2/3 powerdomain code This patch creates an interface to the powerdomain registers in the PRM/CM modules on OMAP2/3. This interface is intended to be used by PM code, e.g., pm.c; not by device drivers directly. Each powerdomain will be defined in later patches as static structures. Also defined are dependencies between powerdomains, used for adding and removing PM_WKDEP and CM_SLEEPDEP bits. The powerdomain structures are linked into a list at boot by pwrdm_register(), similar to the OMAP clock code. The patch adds a Kconfig option, CONFIG_OMAP_DEBUG_POWERDOMAIN, which when enabled will emit verbose debug messages via pr_debug(). Signed-off-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-08-19 08:08:40 +00:00
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
OMAP2+: powerdomains: move powerdomain static data to .c files Static data should be declared in .c files, not .h files. It should be possible to #include .h files at any point without creating multiple copies of the same data. We converted the clock data to .c files some time ago. This patch does the same for the powerdomain data. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 03:01:20 +00:00
*
* XXX This should be moved to the mach-omap2/ directory at the earliest
* opportunity.
ARM: OMAP2: Powerdomain: Add base OMAP2/3 powerdomain code This patch creates an interface to the powerdomain registers in the PRM/CM modules on OMAP2/3. This interface is intended to be used by PM code, e.g., pm.c; not by device drivers directly. Each powerdomain will be defined in later patches as static structures. Also defined are dependencies between powerdomains, used for adding and removing PM_WKDEP and CM_SLEEPDEP bits. The powerdomain structures are linked into a list at boot by pwrdm_register(), similar to the OMAP clock code. The patch adds a Kconfig option, CONFIG_OMAP_DEBUG_POWERDOMAIN, which when enabled will emit verbose debug messages via pr_debug(). Signed-off-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-08-19 08:08:40 +00:00
*/
OMAP2+: powerdomain: move header file from plat-omap to mach-omap2 The OMAP powerdomain code and data is all OMAP2+-specific. This seems unlikely to change any time soon. Move plat-omap/include/plat/powerdomain.h to mach-omap2/powerdomain.h. The primary point of doing this is to remove the temptation for unrelated upper-layer code to access powerdomain code and data directly. As part of this process, remove the references to powerdomain data from the GPIO "driver" and the OMAP PM no-op layer, both in plat-omap. Change the DSPBridge code to point to the new location for the powerdomain headers. The DSPBridge code should not be including the powerdomain headers; these should be removed. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Omar Ramirez Luna <omar.ramirez@ti.com> Cc: Felipe Contreras <felipe.contreras@gmail.com> Cc: Greg Kroah-Hartman <greg@kroah.com>
2010-12-22 04:05:16 +00:00
#ifndef __ARCH_ARM_MACH_OMAP2_POWERDOMAIN_H
#define __ARCH_ARM_MACH_OMAP2_POWERDOMAIN_H
ARM: OMAP2: Powerdomain: Add base OMAP2/3 powerdomain code This patch creates an interface to the powerdomain registers in the PRM/CM modules on OMAP2/3. This interface is intended to be used by PM code, e.g., pm.c; not by device drivers directly. Each powerdomain will be defined in later patches as static structures. Also defined are dependencies between powerdomains, used for adding and removing PM_WKDEP and CM_SLEEPDEP bits. The powerdomain structures are linked into a list at boot by pwrdm_register(), similar to the OMAP clock code. The patch adds a Kconfig option, CONFIG_OMAP_DEBUG_POWERDOMAIN, which when enabled will emit verbose debug messages via pr_debug(). Signed-off-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-08-19 08:08:40 +00:00
#include <linux/types.h>
#include <linux/list.h>
ARM: OMAP2+: powerdomain/clockdomain: add a per-powerdomain spinlock Add a per-powerdomain spinlock. Use that instead of the clockdomain spinlock. Add pwrdm_lock()/pwrdm_unlock() functions to allow other code to acquire or release the powerdomain spinlock without reaching directly into the struct powerdomain. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Jean Pihet <jean.pihet@newoldbits.com>
2013-01-26 07:58:16 +00:00
#include <linux/spinlock.h>
ARM: OMAP2: Powerdomain: Add base OMAP2/3 powerdomain code This patch creates an interface to the powerdomain registers in the PRM/CM modules on OMAP2/3. This interface is intended to be used by PM code, e.g., pm.c; not by device drivers directly. Each powerdomain will be defined in later patches as static structures. Also defined are dependencies between powerdomains, used for adding and removing PM_WKDEP and CM_SLEEPDEP bits. The powerdomain structures are linked into a list at boot by pwrdm_register(), similar to the OMAP clock code. The patch adds a Kconfig option, CONFIG_OMAP_DEBUG_POWERDOMAIN, which when enabled will emit verbose debug messages via pr_debug(). Signed-off-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-08-19 08:08:40 +00:00
OMAP2+: powerdomain: add voltagedomain to struct powerdomain Each powerdomain is associated with a voltage domain. Add an entry to struct powerdomain where the enclosing voltagedomain can be referenced. Modeled after similar relationship between clockdomains and powerdomains. Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-03-23 14:22:23 +00:00
#include "voltage.h"
ARM: OMAP2: Powerdomain: Add base OMAP2/3 powerdomain code This patch creates an interface to the powerdomain registers in the PRM/CM modules on OMAP2/3. This interface is intended to be used by PM code, e.g., pm.c; not by device drivers directly. Each powerdomain will be defined in later patches as static structures. Also defined are dependencies between powerdomains, used for adding and removing PM_WKDEP and CM_SLEEPDEP bits. The powerdomain structures are linked into a list at boot by pwrdm_register(), similar to the OMAP clock code. The patch adds a Kconfig option, CONFIG_OMAP_DEBUG_POWERDOMAIN, which when enabled will emit verbose debug messages via pr_debug(). Signed-off-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-08-19 08:08:40 +00:00
/* Powerdomain basic power states */
#define PWRDM_POWER_OFF 0x0
#define PWRDM_POWER_RET 0x1
#define PWRDM_POWER_INACTIVE 0x2
#define PWRDM_POWER_ON 0x3
OMAP powerdomain/PM: use symbolic constants for the max number of power states Replace some bare constants with power states. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Kevin Hilman <khilman@deeprootsystems.com>
2009-12-08 23:33:12 +00:00
#define PWRDM_MAX_PWRSTS 4
ARM: OMAP2: Powerdomain: Add base OMAP2/3 powerdomain code This patch creates an interface to the powerdomain registers in the PRM/CM modules on OMAP2/3. This interface is intended to be used by PM code, e.g., pm.c; not by device drivers directly. Each powerdomain will be defined in later patches as static structures. Also defined are dependencies between powerdomains, used for adding and removing PM_WKDEP and CM_SLEEPDEP bits. The powerdomain structures are linked into a list at boot by pwrdm_register(), similar to the OMAP clock code. The patch adds a Kconfig option, CONFIG_OMAP_DEBUG_POWERDOMAIN, which when enabled will emit verbose debug messages via pr_debug(). Signed-off-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-08-19 08:08:40 +00:00
/* Powerdomain allowable state bitfields */
OMAP4 powerdomain: Fix pwrsts flags for ALWAYS ON domains The pwrsts flag for ALWAYS ON domains like always_on_core_pwrdm and wkup_pwrdm is wrongly populated with the define for a powerdomain power state, instead of the allowable state bitfields. This causes a few api's to fail sensing invalid pwrst requested. Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-05-19 02:24:01 +00:00
#define PWRSTS_ON (1 << PWRDM_POWER_ON)
OMAP2+: powerdomain: add pwrdm_can_ever_lose_context() Some drivers wish to know whether the device that they control can ever lose context, for example, when the device's enclosing powerdomain loses power. They can use this information to determine whether it is necessary to save and restore device context, or whether it can be skipped. Implement the powerdomain portion of this by adding the function pwrdm_can_ever_lose_context(). This is not for use directly from driver code, but instead is intended to be called from driver-subarch integration code (i.e., arch/arm/*omap* code). Currently, the result from this function should be passed into the driver code via struct platform_data, but at some point this should be part of some common or OMAP-specific device code. While here, update file copyrights. Signed-off-by: Paul Walmsley <paul@pwsan.com>
2011-03-08 02:28:15 +00:00
#define PWRSTS_INACTIVE (1 << PWRDM_POWER_INACTIVE)
#define PWRSTS_RET (1 << PWRDM_POWER_RET)
OMAP4: powerdomain: Update DSS logic state for ES2 DSS on ES2 supports only OSWR, hence remove the support for CSWR from the powerdomain framework. Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Benoît Cousson <b-cousson@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Kevin Hilman <khilman@deeprootsystems.com>
2010-09-27 20:02:56 +00:00
#define PWRSTS_OFF (1 << PWRDM_POWER_OFF)
ARM: OMAP2: Powerdomain: Add base OMAP2/3 powerdomain code This patch creates an interface to the powerdomain registers in the PRM/CM modules on OMAP2/3. This interface is intended to be used by PM code, e.g., pm.c; not by device drivers directly. Each powerdomain will be defined in later patches as static structures. Also defined are dependencies between powerdomains, used for adding and removing PM_WKDEP and CM_SLEEPDEP bits. The powerdomain structures are linked into a list at boot by pwrdm_register(), similar to the OMAP clock code. The patch adds a Kconfig option, CONFIG_OMAP_DEBUG_POWERDOMAIN, which when enabled will emit verbose debug messages via pr_debug(). Signed-off-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-08-19 08:08:40 +00:00
OMAP2+: powerdomain: add pwrdm_can_ever_lose_context() Some drivers wish to know whether the device that they control can ever lose context, for example, when the device's enclosing powerdomain loses power. They can use this information to determine whether it is necessary to save and restore device context, or whether it can be skipped. Implement the powerdomain portion of this by adding the function pwrdm_can_ever_lose_context(). This is not for use directly from driver code, but instead is intended to be called from driver-subarch integration code (i.e., arch/arm/*omap* code). Currently, the result from this function should be passed into the driver code via struct platform_data, but at some point this should be part of some common or OMAP-specific device code. While here, update file copyrights. Signed-off-by: Paul Walmsley <paul@pwsan.com>
2011-03-08 02:28:15 +00:00
#define PWRSTS_OFF_ON (PWRSTS_OFF | PWRSTS_ON)
#define PWRSTS_OFF_RET (PWRSTS_OFF | PWRSTS_RET)
#define PWRSTS_RET_ON (PWRSTS_RET | PWRSTS_ON)
#define PWRSTS_OFF_RET_ON (PWRSTS_OFF_RET | PWRSTS_ON)
ARM: OMAP2: Powerdomain: Add base OMAP2/3 powerdomain code This patch creates an interface to the powerdomain registers in the PRM/CM modules on OMAP2/3. This interface is intended to be used by PM code, e.g., pm.c; not by device drivers directly. Each powerdomain will be defined in later patches as static structures. Also defined are dependencies between powerdomains, used for adding and removing PM_WKDEP and CM_SLEEPDEP bits. The powerdomain structures are linked into a list at boot by pwrdm_register(), similar to the OMAP clock code. The patch adds a Kconfig option, CONFIG_OMAP_DEBUG_POWERDOMAIN, which when enabled will emit verbose debug messages via pr_debug(). Signed-off-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-08-19 08:08:40 +00:00
ARM: OMAP2+: powerdomain: fix whitespace, improve flag comments Fix some whitespace problems introduced by commit da03ce65b5431245b9cd20db3edaaa6b9f5c8dc1 ("OMAP3: powerdomain data: add voltage domains"). Also, improve the documentation for the struct powerdomain.flags field. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Kevin Hilman <khilman@deeprootsystems.com>
2013-01-26 07:58:17 +00:00
/*
* Powerdomain flags (struct powerdomain.flags)
*
* PWRDM_HAS_HDWR_SAR - powerdomain has hardware save-and-restore support
*
* PWRDM_HAS_MPU_QUIRK - MPU pwr domain has MEM bank 0 bits in MEM
* bank 1 position. This is true for OMAP3430
*
* PWRDM_HAS_LOWPOWERSTATECHANGE - can transition from a sleep state
* to a lower sleep state without waking up the powerdomain
*/
#define PWRDM_HAS_HDWR_SAR BIT(0)
#define PWRDM_HAS_MPU_QUIRK BIT(1)
#define PWRDM_HAS_LOWPOWERSTATECHANGE BIT(2)
[ARM] OMAP3 pwrdm: add hardware save-and-restore (SAR) support OMAP3430ES2+ introduces a new feature: optional powerdomain context hardware save-and-restore (SAR). Currently, this feature only applies to USBHOST and USBTLL module context when the USBHOST or CORE powerdomains enter a low-power sleep state[1]. This feature avoids re-enumeration of USB devices when the powerdomains return from idle, which is potentially time-consuming. This patch adds support for enabling and disabling hardware save-and-restore to the powerdomain code. Three new functions are added, pwrdm_enable_hdwr_sar(), pwrdm_disable_hdwr_sar(), and pwrdm_can_hdwr_sar(). A new struct powerdomain "flags" field is added, with a PWRDM_HAS_HDWR_SAR flag to indicate powerdomains with SAR support. Thanks to Jouni Högander <jouni.hogander@nokia.com> for reviewing an earlier version of these patches, and Richard Woodruff <r-woodruff2@ti.com> for clarifying the purpose of these bits. 1. For the USBHOST controller module, context loss occurs when the USBHOST powerdomain enters off-idle. For USBTLL, context loss occurs either if CORE enters off-idle, or if the CORE logic is configured to turn off when CORE enters retention-idle (OSWR). 34xx ES2 TRM 4.8.6.1.1, 4.8.6.1.2 Signed-off-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-06-26 00:09:37 +00:00
ARM: OMAP2: Powerdomain: Add base OMAP2/3 powerdomain code This patch creates an interface to the powerdomain registers in the PRM/CM modules on OMAP2/3. This interface is intended to be used by PM code, e.g., pm.c; not by device drivers directly. Each powerdomain will be defined in later patches as static structures. Also defined are dependencies between powerdomains, used for adding and removing PM_WKDEP and CM_SLEEPDEP bits. The powerdomain structures are linked into a list at boot by pwrdm_register(), similar to the OMAP clock code. The patch adds a Kconfig option, CONFIG_OMAP_DEBUG_POWERDOMAIN, which when enabled will emit verbose debug messages via pr_debug(). Signed-off-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-08-19 08:08:40 +00:00
/*
ARM: OMAP4: PM: Adapt the existing OMAP2/3 and common Power Domain Frameworks. Taking care of the platform specific and common power domains with proper checks. Also refining some Macros according to the latest OMAP4 requirements. Signed-off-by: Abhijit Pagare <abhijitpagare@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoit Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com>
2010-01-27 03:12:52 +00:00
* Number of memory banks that are power-controllable. On OMAP4430, the
* maximum is 5.
ARM: OMAP2: Powerdomain: Add base OMAP2/3 powerdomain code This patch creates an interface to the powerdomain registers in the PRM/CM modules on OMAP2/3. This interface is intended to be used by PM code, e.g., pm.c; not by device drivers directly. Each powerdomain will be defined in later patches as static structures. Also defined are dependencies between powerdomains, used for adding and removing PM_WKDEP and CM_SLEEPDEP bits. The powerdomain structures are linked into a list at boot by pwrdm_register(), similar to the OMAP clock code. The patch adds a Kconfig option, CONFIG_OMAP_DEBUG_POWERDOMAIN, which when enabled will emit verbose debug messages via pr_debug(). Signed-off-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-08-19 08:08:40 +00:00
*/
ARM: OMAP4: PM: Adapt the existing OMAP2/3 and common Power Domain Frameworks. Taking care of the platform specific and common power domains with proper checks. Also refining some Macros according to the latest OMAP4 requirements. Signed-off-by: Abhijit Pagare <abhijitpagare@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoit Cousson <b-cousson@ti.com> Cc: Rajendra Nayak <rnayak@ti.com>
2010-01-27 03:12:52 +00:00
#define PWRDM_MAX_MEM_BANKS 5
ARM: OMAP2: Powerdomain: Add base OMAP2/3 powerdomain code This patch creates an interface to the powerdomain registers in the PRM/CM modules on OMAP2/3. This interface is intended to be used by PM code, e.g., pm.c; not by device drivers directly. Each powerdomain will be defined in later patches as static structures. Also defined are dependencies between powerdomains, used for adding and removing PM_WKDEP and CM_SLEEPDEP bits. The powerdomain structures are linked into a list at boot by pwrdm_register(), similar to the OMAP clock code. The patch adds a Kconfig option, CONFIG_OMAP_DEBUG_POWERDOMAIN, which when enabled will emit verbose debug messages via pr_debug(). Signed-off-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-08-19 08:08:40 +00:00
ARM: OMAP2: Clockdomain: Connect clockdomain code to powerdomain code Thie patch adds code to the powerdomain layer to track the clockdomains associated with each powerdomain. It also modifies the clockdomain code to register clockdomains with their corresponding powerdomain when the clockdomain is registered. Signed-off-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-08-19 08:08:44 +00:00
/*
* Maximum number of clockdomains that can be associated with a powerdomain.
ARM: OMAP AM33xx: powerdomains: add AM335x support Add offset & mask fields to struct powerdomain In case of AM33xx family of devices, there is no consistency between PWRSTCTRL & PWRSTST register offsers in PRM space, for example - PRM_XXX PWRSTCTRL PWRSTST ======================================= PRM_PER_MOD: 0x0C, 0x08 PRM_WKUP_MOD: 0x04, 0x08 PRM_MPU_MOD: 0x00, 0x04 PRM_DEVICE_MOD: NA, NA And also, there is no consistency between bit-offsets inside PWRSTCTRL & PWRSTST register, for example - PRM_XXX LOGICRET MEMON MEMRET ======================================= GFX_PWRCTRL: 2, 17, 6 PER_PWRCTRL: 3, 25, 29 MPU_PWRCTRL: 2, 18, 22 WKUP_PWRCTRL: 3, NA, NA This means, we need to maintain and pass on all this information in powerdomain handle; so adding fields for, - PWRSTCTRL/ST register offset - Logic retention state mask - mem_on/ret/pwrst/retst mask Currently, this fields is only applicable and used for AM33XX devices. Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com> Cc: Benoit Cousson <b-cousson@ti.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Kevin Hilman <khilman@ti.com> Cc: Paul Walmsley <paul@pwsan.com> Cc: Rajendra Nayak <rnayak@ti.com> [paul@pwsan.com: this patch is a combination of "Add offset & mask fields to struct powerdomain" and the powerdomain portions of "ARM: OMAP3+: am33xx: Add powerdomain & PRM support"; updated for 3.5] Signed-off-by: Paul Walmsley <paul@pwsan.com>
2012-06-18 06:47:27 +00:00
* PER powerdomain on AM33XX is the worst case
ARM: OMAP2: Clockdomain: Connect clockdomain code to powerdomain code Thie patch adds code to the powerdomain layer to track the clockdomains associated with each powerdomain. It also modifies the clockdomain code to register clockdomains with their corresponding powerdomain when the clockdomain is registered. Signed-off-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-08-19 08:08:44 +00:00
*/
ARM: OMAP AM33xx: powerdomains: add AM335x support Add offset & mask fields to struct powerdomain In case of AM33xx family of devices, there is no consistency between PWRSTCTRL & PWRSTST register offsers in PRM space, for example - PRM_XXX PWRSTCTRL PWRSTST ======================================= PRM_PER_MOD: 0x0C, 0x08 PRM_WKUP_MOD: 0x04, 0x08 PRM_MPU_MOD: 0x00, 0x04 PRM_DEVICE_MOD: NA, NA And also, there is no consistency between bit-offsets inside PWRSTCTRL & PWRSTST register, for example - PRM_XXX LOGICRET MEMON MEMRET ======================================= GFX_PWRCTRL: 2, 17, 6 PER_PWRCTRL: 3, 25, 29 MPU_PWRCTRL: 2, 18, 22 WKUP_PWRCTRL: 3, NA, NA This means, we need to maintain and pass on all this information in powerdomain handle; so adding fields for, - PWRSTCTRL/ST register offset - Logic retention state mask - mem_on/ret/pwrst/retst mask Currently, this fields is only applicable and used for AM33XX devices. Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com> Cc: Benoit Cousson <b-cousson@ti.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Kevin Hilman <khilman@ti.com> Cc: Paul Walmsley <paul@pwsan.com> Cc: Rajendra Nayak <rnayak@ti.com> [paul@pwsan.com: this patch is a combination of "Add offset & mask fields to struct powerdomain" and the powerdomain portions of "ARM: OMAP3+: am33xx: Add powerdomain & PRM support"; updated for 3.5] Signed-off-by: Paul Walmsley <paul@pwsan.com>
2012-06-18 06:47:27 +00:00
#define PWRDM_MAX_CLKDMS 11
ARM: OMAP2: Clockdomain: Connect clockdomain code to powerdomain code Thie patch adds code to the powerdomain layer to track the clockdomains associated with each powerdomain. It also modifies the clockdomain code to register clockdomains with their corresponding powerdomain when the clockdomain is registered. Signed-off-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-08-19 08:08:44 +00:00
ARM: OMAP2: Powerdomain: Add base OMAP2/3 powerdomain code This patch creates an interface to the powerdomain registers in the PRM/CM modules on OMAP2/3. This interface is intended to be used by PM code, e.g., pm.c; not by device drivers directly. Each powerdomain will be defined in later patches as static structures. Also defined are dependencies between powerdomains, used for adding and removing PM_WKDEP and CM_SLEEPDEP bits. The powerdomain structures are linked into a list at boot by pwrdm_register(), similar to the OMAP clock code. The patch adds a Kconfig option, CONFIG_OMAP_DEBUG_POWERDOMAIN, which when enabled will emit verbose debug messages via pr_debug(). Signed-off-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-08-19 08:08:40 +00:00
/* XXX A completely arbitrary number. What is reasonable here? */
#define PWRDM_TRANSITION_BAILOUT 100000
ARM: OMAP2: Clockdomain: Connect clockdomain code to powerdomain code Thie patch adds code to the powerdomain layer to track the clockdomains associated with each powerdomain. It also modifies the clockdomain code to register clockdomains with their corresponding powerdomain when the clockdomain is registered. Signed-off-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-08-19 08:08:44 +00:00
struct clockdomain;
ARM: OMAP2: Powerdomain: Add base OMAP2/3 powerdomain code This patch creates an interface to the powerdomain registers in the PRM/CM modules on OMAP2/3. This interface is intended to be used by PM code, e.g., pm.c; not by device drivers directly. Each powerdomain will be defined in later patches as static structures. Also defined are dependencies between powerdomains, used for adding and removing PM_WKDEP and CM_SLEEPDEP bits. The powerdomain structures are linked into a list at boot by pwrdm_register(), similar to the OMAP clock code. The patch adds a Kconfig option, CONFIG_OMAP_DEBUG_POWERDOMAIN, which when enabled will emit verbose debug messages via pr_debug(). Signed-off-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-08-19 08:08:40 +00:00
struct powerdomain;
OMAP clockdomain/powerdomain: improve documentation This patch only affects documentation; no functional changes are included. Clean up comments in the current clockdomain, powerdomain code and header files. This mostly involves conversion to kerneldoc format, although some clarifications are also included. Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-01-27 03:13:02 +00:00
/**
* struct powerdomain - OMAP powerdomain
* @name: Powerdomain name
OMAP2+: powerdomain: add voltagedomain to struct powerdomain Each powerdomain is associated with a voltage domain. Add an entry to struct powerdomain where the enclosing voltagedomain can be referenced. Modeled after similar relationship between clockdomains and powerdomains. Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-03-23 14:22:23 +00:00
* @voltdm: voltagedomain containing this powerdomain
OMAP clockdomain/powerdomain: improve documentation This patch only affects documentation; no functional changes are included. Clean up comments in the current clockdomain, powerdomain code and header files. This mostly involves conversion to kerneldoc format, although some clarifications are also included. Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-01-27 03:13:02 +00:00
* @prcm_offs: the address offset from CM_BASE/PRM_BASE
OMAP4: powerdomains: add PRCM partition data; use OMAP4 PRM functions OMAP4 powerdomain control registers are split between the PRM hardware module and the PRCM_MPU local PRCM. Add this PRCM partition information to each OMAP4 powerdomain record, and convert the OMAP4 powerdomain function implementations to use the OMAP4 PRM instance functions. Also fixes a potential null pointer dereference of pwrdm->name. The autogeneration scripts have been updated. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Benoît Cousson <b-cousson@ti.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 04:05:14 +00:00
* @prcm_partition: (OMAP4 only) the PRCM partition ID containing @prcm_offs
OMAP clockdomain/powerdomain: improve documentation This patch only affects documentation; no functional changes are included. Clean up comments in the current clockdomain, powerdomain code and header files. This mostly involves conversion to kerneldoc format, although some clarifications are also included. Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-01-27 03:13:02 +00:00
* @pwrsts: Possible powerdomain power states
* @pwrsts_logic_ret: Possible logic power states when pwrdm in RETENTION
* @flags: Powerdomain flags
* @banks: Number of software-controllable memory banks in this powerdomain
* @pwrsts_mem_ret: Possible memory bank pwrstates when pwrdm in RETENTION
* @pwrsts_mem_on: Possible memory bank pwrstates when pwrdm in ON
* @pwrdm_clkdms: Clockdomains in this powerdomain
* @node: list_head linking all powerdomains
OMAP2+: voltage: keep track of powerdomains in each voltagedomain When a powerdomain is registered and it has an associated voltage domain, add the powerdomain to the voltagedomain using voltdm_add_pwrdm(). Also add voltagedomain iterator helper functions to iterate over all registered voltagedomains and all powerdomains associated with a voltagedomain. Modeled after a similar relationship between clockdomains and powerdomains. Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-03-16 23:13:15 +00:00
* @voltdm_node: list_head linking all powerdomains in a voltagedomain
ARM: OMAP AM33xx: powerdomains: add AM335x support Add offset & mask fields to struct powerdomain In case of AM33xx family of devices, there is no consistency between PWRSTCTRL & PWRSTST register offsers in PRM space, for example - PRM_XXX PWRSTCTRL PWRSTST ======================================= PRM_PER_MOD: 0x0C, 0x08 PRM_WKUP_MOD: 0x04, 0x08 PRM_MPU_MOD: 0x00, 0x04 PRM_DEVICE_MOD: NA, NA And also, there is no consistency between bit-offsets inside PWRSTCTRL & PWRSTST register, for example - PRM_XXX LOGICRET MEMON MEMRET ======================================= GFX_PWRCTRL: 2, 17, 6 PER_PWRCTRL: 3, 25, 29 MPU_PWRCTRL: 2, 18, 22 WKUP_PWRCTRL: 3, NA, NA This means, we need to maintain and pass on all this information in powerdomain handle; so adding fields for, - PWRSTCTRL/ST register offset - Logic retention state mask - mem_on/ret/pwrst/retst mask Currently, this fields is only applicable and used for AM33XX devices. Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com> Cc: Benoit Cousson <b-cousson@ti.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Kevin Hilman <khilman@ti.com> Cc: Paul Walmsley <paul@pwsan.com> Cc: Rajendra Nayak <rnayak@ti.com> [paul@pwsan.com: this patch is a combination of "Add offset & mask fields to struct powerdomain" and the powerdomain portions of "ARM: OMAP3+: am33xx: Add powerdomain & PRM support"; updated for 3.5] Signed-off-by: Paul Walmsley <paul@pwsan.com>
2012-06-18 06:47:27 +00:00
* @pwrstctrl_offs: (AM33XX only) XXX_PWRSTCTRL reg offset from prcm_offs
* @pwrstst_offs: (AM33XX only) XXX_PWRSTST reg offset from prcm_offs
* @logicretstate_mask: (AM33XX only) mask for logic retention bitfield
* in @pwrstctrl_offs
* @mem_on_mask: (AM33XX only) mask for mem on bitfield in @pwrstctrl_offs
* @mem_ret_mask: (AM33XX only) mask for mem ret bitfield in @pwrstctrl_offs
* @mem_pwrst_mask: (AM33XX only) mask for mem state bitfield in @pwrstst_offs
* @mem_retst_mask: (AM33XX only) mask for mem retention state bitfield
* in @pwrstctrl_offs
OMAP clockdomain/powerdomain: improve documentation This patch only affects documentation; no functional changes are included. Clean up comments in the current clockdomain, powerdomain code and header files. This mostly involves conversion to kerneldoc format, although some clarifications are also included. Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-01-27 03:13:02 +00:00
* @state:
* @state_counter:
* @timer:
* @state_timer:
ARM: OMAP2+: powerdomain/clockdomain: add a per-powerdomain spinlock Add a per-powerdomain spinlock. Use that instead of the clockdomain spinlock. Add pwrdm_lock()/pwrdm_unlock() functions to allow other code to acquire or release the powerdomain spinlock without reaching directly into the struct powerdomain. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Jean Pihet <jean.pihet@newoldbits.com>
2013-01-26 07:58:16 +00:00
* @_lock: spinlock used to serialize powerdomain and some clockdomain ops
* @_lock_flags: stored flags when @_lock is taken
OMAP4: powerdomains: add PRCM partition data; use OMAP4 PRM functions OMAP4 powerdomain control registers are split between the PRM hardware module and the PRCM_MPU local PRCM. Add this PRCM partition information to each OMAP4 powerdomain record, and convert the OMAP4 powerdomain function implementations to use the OMAP4 PRM instance functions. Also fixes a potential null pointer dereference of pwrdm->name. The autogeneration scripts have been updated. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Benoît Cousson <b-cousson@ti.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 04:05:14 +00:00
*
* @prcm_partition possible values are defined in mach-omap2/prcm44xx.h.
OMAP clockdomain/powerdomain: improve documentation This patch only affects documentation; no functional changes are included. Clean up comments in the current clockdomain, powerdomain code and header files. This mostly involves conversion to kerneldoc format, although some clarifications are also included. Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-01-27 03:13:02 +00:00
*/
ARM: OMAP2: Powerdomain: Add base OMAP2/3 powerdomain code This patch creates an interface to the powerdomain registers in the PRM/CM modules on OMAP2/3. This interface is intended to be used by PM code, e.g., pm.c; not by device drivers directly. Each powerdomain will be defined in later patches as static structures. Also defined are dependencies between powerdomains, used for adding and removing PM_WKDEP and CM_SLEEPDEP bits. The powerdomain structures are linked into a list at boot by pwrdm_register(), similar to the OMAP clock code. The patch adds a Kconfig option, CONFIG_OMAP_DEBUG_POWERDOMAIN, which when enabled will emit verbose debug messages via pr_debug(). Signed-off-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-08-19 08:08:40 +00:00
struct powerdomain {
const char *name;
OMAP2+: powerdomain: add voltagedomain to struct powerdomain Each powerdomain is associated with a voltage domain. Add an entry to struct powerdomain where the enclosing voltagedomain can be referenced. Modeled after similar relationship between clockdomains and powerdomains. Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-03-23 14:22:23 +00:00
union {
const char *name;
struct voltagedomain *ptr;
} voltdm;
OMAP powerdomain: rearrange struct powerdomain to save some memory This patch rearranges the order of structure members in struct powerdomain to avoid wasting memory due to alignment restrictions. Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-01-27 03:13:01 +00:00
const s16 prcm_offs;
ARM: OMAP2: Powerdomain: Add base OMAP2/3 powerdomain code This patch creates an interface to the powerdomain registers in the PRM/CM modules on OMAP2/3. This interface is intended to be used by PM code, e.g., pm.c; not by device drivers directly. Each powerdomain will be defined in later patches as static structures. Also defined are dependencies between powerdomains, used for adding and removing PM_WKDEP and CM_SLEEPDEP bits. The powerdomain structures are linked into a list at boot by pwrdm_register(), similar to the OMAP clock code. The patch adds a Kconfig option, CONFIG_OMAP_DEBUG_POWERDOMAIN, which when enabled will emit verbose debug messages via pr_debug(). Signed-off-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-08-19 08:08:40 +00:00
const u8 pwrsts;
const u8 pwrsts_logic_ret;
[ARM] OMAP3 pwrdm: add hardware save-and-restore (SAR) support OMAP3430ES2+ introduces a new feature: optional powerdomain context hardware save-and-restore (SAR). Currently, this feature only applies to USBHOST and USBTLL module context when the USBHOST or CORE powerdomains enter a low-power sleep state[1]. This feature avoids re-enumeration of USB devices when the powerdomains return from idle, which is potentially time-consuming. This patch adds support for enabling and disabling hardware save-and-restore to the powerdomain code. Three new functions are added, pwrdm_enable_hdwr_sar(), pwrdm_disable_hdwr_sar(), and pwrdm_can_hdwr_sar(). A new struct powerdomain "flags" field is added, with a PWRDM_HAS_HDWR_SAR flag to indicate powerdomains with SAR support. Thanks to Jouni Högander <jouni.hogander@nokia.com> for reviewing an earlier version of these patches, and Richard Woodruff <r-woodruff2@ti.com> for clarifying the purpose of these bits. 1. For the USBHOST controller module, context loss occurs when the USBHOST powerdomain enters off-idle. For USBTLL, context loss occurs either if CORE enters off-idle, or if the CORE logic is configured to turn off when CORE enters retention-idle (OSWR). 34xx ES2 TRM 4.8.6.1.1, 4.8.6.1.2 Signed-off-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-06-26 00:09:37 +00:00
const u8 flags;
ARM: OMAP2: Powerdomain: Add base OMAP2/3 powerdomain code This patch creates an interface to the powerdomain registers in the PRM/CM modules on OMAP2/3. This interface is intended to be used by PM code, e.g., pm.c; not by device drivers directly. Each powerdomain will be defined in later patches as static structures. Also defined are dependencies between powerdomains, used for adding and removing PM_WKDEP and CM_SLEEPDEP bits. The powerdomain structures are linked into a list at boot by pwrdm_register(), similar to the OMAP clock code. The patch adds a Kconfig option, CONFIG_OMAP_DEBUG_POWERDOMAIN, which when enabled will emit verbose debug messages via pr_debug(). Signed-off-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-08-19 08:08:40 +00:00
const u8 banks;
const u8 pwrsts_mem_ret[PWRDM_MAX_MEM_BANKS];
const u8 pwrsts_mem_on[PWRDM_MAX_MEM_BANKS];
OMAP4: powerdomains: add PRCM partition data; use OMAP4 PRM functions OMAP4 powerdomain control registers are split between the PRM hardware module and the PRCM_MPU local PRCM. Add this PRCM partition information to each OMAP4 powerdomain record, and convert the OMAP4 powerdomain function implementations to use the OMAP4 PRM instance functions. Also fixes a potential null pointer dereference of pwrdm->name. The autogeneration scripts have been updated. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Benoît Cousson <b-cousson@ti.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 04:05:14 +00:00
const u8 prcm_partition;
ARM: OMAP2: Clockdomain: Connect clockdomain code to powerdomain code Thie patch adds code to the powerdomain layer to track the clockdomains associated with each powerdomain. It also modifies the clockdomain code to register clockdomains with their corresponding powerdomain when the clockdomain is registered. Signed-off-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-08-19 08:08:44 +00:00
struct clockdomain *pwrdm_clkdms[PWRDM_MAX_CLKDMS];
ARM: OMAP2: Powerdomain: Add base OMAP2/3 powerdomain code This patch creates an interface to the powerdomain registers in the PRM/CM modules on OMAP2/3. This interface is intended to be used by PM code, e.g., pm.c; not by device drivers directly. Each powerdomain will be defined in later patches as static structures. Also defined are dependencies between powerdomains, used for adding and removing PM_WKDEP and CM_SLEEPDEP bits. The powerdomain structures are linked into a list at boot by pwrdm_register(), similar to the OMAP clock code. The patch adds a Kconfig option, CONFIG_OMAP_DEBUG_POWERDOMAIN, which when enabled will emit verbose debug messages via pr_debug(). Signed-off-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-08-19 08:08:40 +00:00
struct list_head node;
OMAP2+: voltage: keep track of powerdomains in each voltagedomain When a powerdomain is registered and it has an associated voltage domain, add the powerdomain to the voltagedomain using voltdm_add_pwrdm(). Also add voltagedomain iterator helper functions to iterate over all registered voltagedomains and all powerdomains associated with a voltagedomain. Modeled after a similar relationship between clockdomains and powerdomains. Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-03-16 23:13:15 +00:00
struct list_head voltdm_node;
OMAP: PM counter infrastructure. This patch provides the infrastructure to count how many times a powerdomain entered a given power state (on, inactive, retention, off). A number of functions are provided which will be called by the chip specific powerdomain and clockdomain code whenever a transition might have happened. Signed-off-by: Peter 'p2' De Schrijver <peter.de-schrijver@nokia.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2008-10-15 14:48:43 +00:00
int state;
OMAP powerdomain/PM: use symbolic constants for the max number of power states Replace some bare constants with power states. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Kevin Hilman <khilman@deeprootsystems.com>
2009-12-08 23:33:12 +00:00
unsigned state_counter[PWRDM_MAX_PWRSTS];
OMAP3 PM: Adding counters for power domain logic off and mem off during retention. This patch adds counters to keep track of whether the powerdomain logic or software controllable memory banks are turned off when the power domain enters retention. During power domain retention if logic gets turned off, the scenario is known as Open Switch Retention. Also during retention s/w controllable memory banks of a power domain can be chosen to be kept in retention or off. This patch adds one counter per powerdomain to track the power domain logic state during retention. Number of memory bank state counters added depends on the number of software controllable memory banks of the powerdomain. To view these counters do cat ../debug/pm_debug/count Signed-off-by: Thara Gopinath <thara@ti.com> [paul@pwsan.com: conditional expressions simplified; counter increment code moved to its own function] Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-02-24 19:05:50 +00:00
unsigned ret_logic_off_counter;
unsigned ret_mem_off_counter[PWRDM_MAX_MEM_BANKS];
ARM: OMAP2+: powerdomain/clockdomain: add a per-powerdomain spinlock Add a per-powerdomain spinlock. Use that instead of the clockdomain spinlock. Add pwrdm_lock()/pwrdm_unlock() functions to allow other code to acquire or release the powerdomain spinlock without reaching directly into the struct powerdomain. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Jean Pihet <jean.pihet@newoldbits.com>
2013-01-26 07:58:16 +00:00
spinlock_t _lock;
unsigned long _lock_flags;
ARM: OMAP AM33xx: powerdomains: add AM335x support Add offset & mask fields to struct powerdomain In case of AM33xx family of devices, there is no consistency between PWRSTCTRL & PWRSTST register offsers in PRM space, for example - PRM_XXX PWRSTCTRL PWRSTST ======================================= PRM_PER_MOD: 0x0C, 0x08 PRM_WKUP_MOD: 0x04, 0x08 PRM_MPU_MOD: 0x00, 0x04 PRM_DEVICE_MOD: NA, NA And also, there is no consistency between bit-offsets inside PWRSTCTRL & PWRSTST register, for example - PRM_XXX LOGICRET MEMON MEMRET ======================================= GFX_PWRCTRL: 2, 17, 6 PER_PWRCTRL: 3, 25, 29 MPU_PWRCTRL: 2, 18, 22 WKUP_PWRCTRL: 3, NA, NA This means, we need to maintain and pass on all this information in powerdomain handle; so adding fields for, - PWRSTCTRL/ST register offset - Logic retention state mask - mem_on/ret/pwrst/retst mask Currently, this fields is only applicable and used for AM33XX devices. Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com> Cc: Benoit Cousson <b-cousson@ti.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Kevin Hilman <khilman@ti.com> Cc: Paul Walmsley <paul@pwsan.com> Cc: Rajendra Nayak <rnayak@ti.com> [paul@pwsan.com: this patch is a combination of "Add offset & mask fields to struct powerdomain" and the powerdomain portions of "ARM: OMAP3+: am33xx: Add powerdomain & PRM support"; updated for 3.5] Signed-off-by: Paul Walmsley <paul@pwsan.com>
2012-06-18 06:47:27 +00:00
const u8 pwrstctrl_offs;
const u8 pwrstst_offs;
const u32 logicretstate_mask;
const u32 mem_on_mask[PWRDM_MAX_MEM_BANKS];
const u32 mem_ret_mask[PWRDM_MAX_MEM_BANKS];
const u32 mem_pwrst_mask[PWRDM_MAX_MEM_BANKS];
const u32 mem_retst_mask[PWRDM_MAX_MEM_BANKS];
OMAP: PM: Add pm-debug counters This patch provides the debugfs entries and a function which will be called by the PM code to register the time spent per domain per state. Also some new fields are added to the powerdomain struct to keep the time information. NOTE: As of v2.6.29, using getnstimeofday() after drivers are suspended is no longer safe since the timekeeping subsystem is also suspended as part of the suspend process. Instead use sched_clock() which on OMAP returns the 32k SYNC timer in nanoseconds. Also, do not print out status for meta powerdomains (dpll*) Signed-off-by: Peter 'p2' De Schrijver <peter.de-schrijver@nokia.com> Signed-off-by: Tero Kristo <tero.kristo@nokia.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2008-10-15 15:13:48 +00:00
#ifdef CONFIG_PM_DEBUG
s64 timer;
OMAP powerdomain/PM: use symbolic constants for the max number of power states Replace some bare constants with power states. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Kevin Hilman <khilman@deeprootsystems.com>
2009-12-08 23:33:12 +00:00
s64 state_timer[PWRDM_MAX_PWRSTS];
OMAP: PM: Add pm-debug counters This patch provides the debugfs entries and a function which will be called by the PM code to register the time spent per domain per state. Also some new fields are added to the powerdomain struct to keep the time information. NOTE: As of v2.6.29, using getnstimeofday() after drivers are suspended is no longer safe since the timekeeping subsystem is also suspended as part of the suspend process. Instead use sched_clock() which on OMAP returns the 32k SYNC timer in nanoseconds. Also, do not print out status for meta powerdomains (dpll*) Signed-off-by: Peter 'p2' De Schrijver <peter.de-schrijver@nokia.com> Signed-off-by: Tero Kristo <tero.kristo@nokia.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2008-10-15 15:13:48 +00:00
#endif
ARM: OMAP2: Powerdomain: Add base OMAP2/3 powerdomain code This patch creates an interface to the powerdomain registers in the PRM/CM modules on OMAP2/3. This interface is intended to be used by PM code, e.g., pm.c; not by device drivers directly. Each powerdomain will be defined in later patches as static structures. Also defined are dependencies between powerdomains, used for adding and removing PM_WKDEP and CM_SLEEPDEP bits. The powerdomain structures are linked into a list at boot by pwrdm_register(), similar to the OMAP clock code. The patch adds a Kconfig option, CONFIG_OMAP_DEBUG_POWERDOMAIN, which when enabled will emit verbose debug messages via pr_debug(). Signed-off-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-08-19 08:08:40 +00:00
};
OMAP: powerdomain: Infrastructure to put arch specific code Put infrastructure in place, so arch specific func pointers can be hooked up to the platform-independent part of the framework. This is in preparation of splitting the powerdomain framework into platform-independent part (for all omaps) and platform-specific parts. Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoit Cousson <b-cousson@ti.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 03:01:18 +00:00
/**
Fix common misspellings Fixes generated by 'codespell' and manually reviewed. Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2011-03-31 01:57:33 +00:00
* struct pwrdm_ops - Arch specific function implementations
OMAP: powerdomain: Infrastructure to put arch specific code Put infrastructure in place, so arch specific func pointers can be hooked up to the platform-independent part of the framework. This is in preparation of splitting the powerdomain framework into platform-independent part (for all omaps) and platform-specific parts. Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoit Cousson <b-cousson@ti.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 03:01:18 +00:00
* @pwrdm_set_next_pwrst: Set the target power state for a pd
* @pwrdm_read_next_pwrst: Read the target power state set for a pd
* @pwrdm_read_pwrst: Read the current power state of a pd
* @pwrdm_read_prev_pwrst: Read the prev power state entered by the pd
* @pwrdm_set_logic_retst: Set the logic state in RET for a pd
* @pwrdm_set_mem_onst: Set the Memory state in ON for a pd
* @pwrdm_set_mem_retst: Set the Memory state in RET for a pd
* @pwrdm_read_logic_pwrst: Read the current logic state of a pd
* @pwrdm_read_prev_logic_pwrst: Read the previous logic state entered by a pd
* @pwrdm_read_logic_retst: Read the logic state in RET for a pd
* @pwrdm_read_mem_pwrst: Read the current memory state of a pd
* @pwrdm_read_prev_mem_pwrst: Read the previous memory state entered by a pd
* @pwrdm_read_mem_retst: Read the memory state in RET for a pd
* @pwrdm_clear_all_prev_pwrst: Clear all previous power states logged for a pd
* @pwrdm_enable_hdwr_sar: Enable Hardware Save-Restore feature for the pd
* @pwrdm_disable_hdwr_sar: Disable Hardware Save-Restore feature for a pd
* @pwrdm_set_lowpwrstchange: Enable pd transitions from a shallow to deep sleep
* @pwrdm_wait_transition: Wait for a pd state transition to complete
ARM: OMAP2+: Powerdomain: Remove the need to always have a voltdm associated to a pwrdm The powerdomain framework currently expects all powerdomains to be associated with a corresponding voltagedomain. For some SoCs' (like the already existing AM33xx family, or for the upcoming AM437x and DRA7 SoCs') which do not have a Voltage controller/Voltage Processor (neither the SR I2C bus to communicate with the PMIC) there is no need for a Powerdomain to have a voltage domain association since there is no auto-scaling of voltages possible using the voltage FSM. Extend the arch operations to add an api which the powerdomain core can then use to identify if a voltdm lookup and association for a powerdomain is really needed. Acked-by: Nishanth Menon <nm@ti.com> Acked-by: Vaibhav Hiremath <hvaibhav@ti.com> Signed-off-by: Rajendra Nayak <rnayak@ti.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Afzal Mohammed <afzal@ti.com> # am335x evm Signed-off-by: Kevin Hilman <khilman@linaro.org>
2013-06-17 13:16:22 +00:00
* @pwrdm_has_voltdm: Check if a voltdm association is needed
ARM: OMAP2+: PM/powerdomain: move omap_set_pwrdm_state() to powerdomain code Move omap_set_pwrdm_state() from the PM code to the powerdomain code, and refactor it to split it up into several functions. A subsequent patch will rename it to conform with the existing powerdomain function names. This version includes some additional documentation, based on a suggestion from Jean Pihet. It also modifies omap_set_pwrdm_state() to not bail out early unless both the powerdomain current power state and the next power state are equal. (Previously it would terminate early if the next power state was equal to the target power state, which was insufficiently rigorous.) Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Jean Pihet <jean.pihet@newoldbits.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Tero Kristo <t-kristo@ti.com>
2013-01-29 20:45:09 +00:00
*
* Regarding @pwrdm_set_lowpwrstchange: On the OMAP2 and 3-family
* chips, a powerdomain's power state is not allowed to directly
* transition from one low-power state (e.g., CSWR) to another
* low-power state (e.g., OFF) without first waking up the
* powerdomain. This wastes energy. So OMAP4 chips support the
* ability to transition a powerdomain power state directly from one
* low-power state to another. The function pointed to by
* @pwrdm_set_lowpwrstchange is intended to configure the OMAP4
* hardware powerdomain state machine to enable this feature.
OMAP: powerdomain: Infrastructure to put arch specific code Put infrastructure in place, so arch specific func pointers can be hooked up to the platform-independent part of the framework. This is in preparation of splitting the powerdomain framework into platform-independent part (for all omaps) and platform-specific parts. Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoit Cousson <b-cousson@ti.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 03:01:18 +00:00
*/
struct pwrdm_ops {
int (*pwrdm_set_next_pwrst)(struct powerdomain *pwrdm, u8 pwrst);
int (*pwrdm_read_next_pwrst)(struct powerdomain *pwrdm);
int (*pwrdm_read_pwrst)(struct powerdomain *pwrdm);
int (*pwrdm_read_prev_pwrst)(struct powerdomain *pwrdm);
int (*pwrdm_set_logic_retst)(struct powerdomain *pwrdm, u8 pwrst);
int (*pwrdm_set_mem_onst)(struct powerdomain *pwrdm, u8 bank, u8 pwrst);
int (*pwrdm_set_mem_retst)(struct powerdomain *pwrdm, u8 bank, u8 pwrst);
int (*pwrdm_read_logic_pwrst)(struct powerdomain *pwrdm);
int (*pwrdm_read_prev_logic_pwrst)(struct powerdomain *pwrdm);
int (*pwrdm_read_logic_retst)(struct powerdomain *pwrdm);
int (*pwrdm_read_mem_pwrst)(struct powerdomain *pwrdm, u8 bank);
int (*pwrdm_read_prev_mem_pwrst)(struct powerdomain *pwrdm, u8 bank);
int (*pwrdm_read_mem_retst)(struct powerdomain *pwrdm, u8 bank);
int (*pwrdm_clear_all_prev_pwrst)(struct powerdomain *pwrdm);
int (*pwrdm_enable_hdwr_sar)(struct powerdomain *pwrdm);
int (*pwrdm_disable_hdwr_sar)(struct powerdomain *pwrdm);
int (*pwrdm_set_lowpwrstchange)(struct powerdomain *pwrdm);
int (*pwrdm_wait_transition)(struct powerdomain *pwrdm);
ARM: OMAP2+: Powerdomain: Remove the need to always have a voltdm associated to a pwrdm The powerdomain framework currently expects all powerdomains to be associated with a corresponding voltagedomain. For some SoCs' (like the already existing AM33xx family, or for the upcoming AM437x and DRA7 SoCs') which do not have a Voltage controller/Voltage Processor (neither the SR I2C bus to communicate with the PMIC) there is no need for a Powerdomain to have a voltage domain association since there is no auto-scaling of voltages possible using the voltage FSM. Extend the arch operations to add an api which the powerdomain core can then use to identify if a voltdm lookup and association for a powerdomain is really needed. Acked-by: Nishanth Menon <nm@ti.com> Acked-by: Vaibhav Hiremath <hvaibhav@ti.com> Signed-off-by: Rajendra Nayak <rnayak@ti.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Afzal Mohammed <afzal@ti.com> # am335x evm Signed-off-by: Kevin Hilman <khilman@linaro.org>
2013-06-17 13:16:22 +00:00
int (*pwrdm_has_voltdm)(void);
OMAP: powerdomain: Infrastructure to put arch specific code Put infrastructure in place, so arch specific func pointers can be hooked up to the platform-independent part of the framework. This is in preparation of splitting the powerdomain framework into platform-independent part (for all omaps) and platform-specific parts. Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoit Cousson <b-cousson@ti.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 03:01:18 +00:00
};
ARM: OMAP2: Powerdomain: Add base OMAP2/3 powerdomain code This patch creates an interface to the powerdomain registers in the PRM/CM modules on OMAP2/3. This interface is intended to be used by PM code, e.g., pm.c; not by device drivers directly. Each powerdomain will be defined in later patches as static structures. Also defined are dependencies between powerdomains, used for adding and removing PM_WKDEP and CM_SLEEPDEP bits. The powerdomain structures are linked into a list at boot by pwrdm_register(), similar to the OMAP clock code. The patch adds a Kconfig option, CONFIG_OMAP_DEBUG_POWERDOMAIN, which when enabled will emit verbose debug messages via pr_debug(). Signed-off-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-08-19 08:08:40 +00:00
OMAP: powerdomain: split pwrdm_init() into two functions In preparation for OMAP_CHIP() removal, split pwrdm_init() into three functions. This allows some of them to be called multiple times: for example, pwrdm_register_pwrdms() can be called once to register powerdomains that are common to a group of SoCs, and once to register powerdomains that are specific to a single SoC. The appropriate order to call these functions - which is enforced by the code - is: 1. pwrdm_register_platform_funcs() 2. pwrdm_register_pwrdms() (can be called multiple times) 3. pwrdm_complete_init() Convert the OMAP2, 3, and 4 powerdomain init code to use these new functions. While here, improve documentation, and increase CodingStyle conformance by shortening some local variable names. Signed-off-by: Paul Walmsley <paul@pwsan.com>
2011-09-14 22:01:21 +00:00
int pwrdm_register_platform_funcs(struct pwrdm_ops *custom_funcs);
int pwrdm_register_pwrdms(struct powerdomain **pwrdm_list);
int pwrdm_complete_init(void);
ARM: OMAP2: Powerdomain: Add base OMAP2/3 powerdomain code This patch creates an interface to the powerdomain registers in the PRM/CM modules on OMAP2/3. This interface is intended to be used by PM code, e.g., pm.c; not by device drivers directly. Each powerdomain will be defined in later patches as static structures. Also defined are dependencies between powerdomains, used for adding and removing PM_WKDEP and CM_SLEEPDEP bits. The powerdomain structures are linked into a list at boot by pwrdm_register(), similar to the OMAP clock code. The patch adds a Kconfig option, CONFIG_OMAP_DEBUG_POWERDOMAIN, which when enabled will emit verbose debug messages via pr_debug(). Signed-off-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-08-19 08:08:40 +00:00
struct powerdomain *pwrdm_lookup(const char *name);
OMAP: PM: Add closures to clkdm_for_each and pwrdm_for_each. Add some infrastructure to easily iterate over clock and power domains. Signed-off-by: Peter 'p2' De Schrijver <peter.de-schrijver@nokia.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2008-10-15 15:13:47 +00:00
int pwrdm_for_each(int (*fn)(struct powerdomain *pwrdm, void *user),
void *user);
OMAP3: PM: introduce a new powerdomain walk helper The 'pwrdm_for_each()' function walks powerdomains with a spinlock locked, so the the callbacks cannot do anything which may sleep. This patch introduces a 'pwrdm_for_each_nolock()' helper which does the same, but without the spinlock locked. This fixes the following lockdep warning: [ 0.000000] WARNING: at kernel/lockdep.c:2460 lockdep_trace_alloc+0xac/0xec() [ 0.000000] Modules linked in: (unwind_backtrace+0x0/0xdc) from [<c0045464>] (warn_slowpath_common+0x48/0x60) (warn_slowpath_common+0x48/0x60) from [<c0067dd4>] (lockdep_trace_alloc+0xac/0xec) (lockdep_trace_alloc+0xac/0xec) from [<c009da14>] (kmem_cache_alloc+0x1c/0xd0) (kmem_cache_alloc+0x1c/0xd0) from [<c00b21d8>] (d_alloc+0x1c/0x1a4) (d_alloc+0x1c/0x1a4) from [<c00a887c>] (__lookup_hash+0xd8/0x118) (__lookup_hash+0xd8/0x118) from [<c00a9f20>] (lookup_one_len+0x84/0x94) (lookup_one_len+0x84/0x94) from [<c010d12c>] (debugfs_create_file+0x8c/0x20c) (debugfs_create_file+0x8c/0x20c) from [<c010d320>] (debugfs_create_dir+0x1c/0x20) (debugfs_create_dir+0x1c/0x20) from [<c000e8cc>] (pwrdms_setup+0x60/0x90) (pwrdms_setup+0x60/0x90) from [<c002e010>] (pwrdm_for_each+0x30/0x80) (pwrdm_for_each+0x30/0x80) from [<c000e79c>] (pm_dbg_init+0x7c/0x14c) (pm_dbg_init+0x7c/0x14c) from [<c00232b4>] (do_one_initcall+0x5c/0x1b8) (do_one_initcall+0x5c/0x1b8) from [<c00083f8>] (kernel_init+0x90/0x10c) (kernel_init+0x90/0x10c) from [<c00242c4>] (kernel_thread_exit+0x0/0x8) Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-10-01 07:01:55 +00:00
int pwrdm_for_each_nolock(int (*fn)(struct powerdomain *pwrdm, void *user),
void *user);
ARM: OMAP2: Powerdomain: Add base OMAP2/3 powerdomain code This patch creates an interface to the powerdomain registers in the PRM/CM modules on OMAP2/3. This interface is intended to be used by PM code, e.g., pm.c; not by device drivers directly. Each powerdomain will be defined in later patches as static structures. Also defined are dependencies between powerdomains, used for adding and removing PM_WKDEP and CM_SLEEPDEP bits. The powerdomain structures are linked into a list at boot by pwrdm_register(), similar to the OMAP clock code. The patch adds a Kconfig option, CONFIG_OMAP_DEBUG_POWERDOMAIN, which when enabled will emit verbose debug messages via pr_debug(). Signed-off-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-08-19 08:08:40 +00:00
ARM: OMAP2: Clockdomain: Connect clockdomain code to powerdomain code Thie patch adds code to the powerdomain layer to track the clockdomains associated with each powerdomain. It also modifies the clockdomain code to register clockdomains with their corresponding powerdomain when the clockdomain is registered. Signed-off-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-08-19 08:08:44 +00:00
int pwrdm_add_clkdm(struct powerdomain *pwrdm, struct clockdomain *clkdm);
int pwrdm_del_clkdm(struct powerdomain *pwrdm, struct clockdomain *clkdm);
int pwrdm_for_each_clkdm(struct powerdomain *pwrdm,
int (*fn)(struct powerdomain *pwrdm,
struct clockdomain *clkdm));
OMAP2+: powerdomain: add voltage domain lookup during register When a powerdomain is registered, lookup the voltage domain by name and keep a pointer to the containing voltagedomain in the powerdomain structure. Modeled after similar method between powerdomain and clockdomain layers. Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-03-16 22:52:47 +00:00
struct voltagedomain *pwrdm_get_voltdm(struct powerdomain *pwrdm);
ARM: OMAP2: Clockdomain: Connect clockdomain code to powerdomain code Thie patch adds code to the powerdomain layer to track the clockdomains associated with each powerdomain. It also modifies the clockdomain code to register clockdomains with their corresponding powerdomain when the clockdomain is registered. Signed-off-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-08-19 08:08:44 +00:00
ARM: OMAP2: Powerdomain: Add base OMAP2/3 powerdomain code This patch creates an interface to the powerdomain registers in the PRM/CM modules on OMAP2/3. This interface is intended to be used by PM code, e.g., pm.c; not by device drivers directly. Each powerdomain will be defined in later patches as static structures. Also defined are dependencies between powerdomains, used for adding and removing PM_WKDEP and CM_SLEEPDEP bits. The powerdomain structures are linked into a list at boot by pwrdm_register(), similar to the OMAP clock code. The patch adds a Kconfig option, CONFIG_OMAP_DEBUG_POWERDOMAIN, which when enabled will emit verbose debug messages via pr_debug(). Signed-off-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-08-19 08:08:40 +00:00
int pwrdm_get_mem_bank_count(struct powerdomain *pwrdm);
int pwrdm_set_next_pwrst(struct powerdomain *pwrdm, u8 pwrst);
int pwrdm_read_next_pwrst(struct powerdomain *pwrdm);
[ARM] OMAP: Fix sparse, checkpatch warnings in OMAP2/3 PRCM/PM code Fix sparse & checkpatch warnings in OMAP2/3 PRCM & PM code. This mostly consists of: - converting pointer comparisons to integers in form similar to (ptr == 0) to the standard idiom (!ptr) - labeling a few non-static private functions as static - adding prototypes for *_init() functions in the appropriate header files, and getting rid of the corresponding open-coded extern prototypes in other C files - renaming the variable 'sclk' in mach-omap2/clock.c:omap2_get_apll_clkin to avoid shadowing an earlier declaration Clean up checkpatch issues. This mostly involves: - converting some asm/ includes to linux/ includes - cleaning up some whitespace - getting rid of braces for conditionals with single following statements Also take care of a few odds and ends, including: - getting rid of unlikely() and likely() - none of this code is particularly fast-path code, so the performance impact seems slim; and some of those likely() and unlikely() indicators are probably not as accurate as the ARM's branch predictor - removing some superfluous casts linux-omap source commit is 347df59f5d20fdf905afbc26b1328b0e28a8a01b. Signed-off-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-01-28 02:12:50 +00:00
int pwrdm_read_pwrst(struct powerdomain *pwrdm);
ARM: OMAP2: Powerdomain: Add base OMAP2/3 powerdomain code This patch creates an interface to the powerdomain registers in the PRM/CM modules on OMAP2/3. This interface is intended to be used by PM code, e.g., pm.c; not by device drivers directly. Each powerdomain will be defined in later patches as static structures. Also defined are dependencies between powerdomains, used for adding and removing PM_WKDEP and CM_SLEEPDEP bits. The powerdomain structures are linked into a list at boot by pwrdm_register(), similar to the OMAP clock code. The patch adds a Kconfig option, CONFIG_OMAP_DEBUG_POWERDOMAIN, which when enabled will emit verbose debug messages via pr_debug(). Signed-off-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-08-19 08:08:40 +00:00
int pwrdm_read_prev_pwrst(struct powerdomain *pwrdm);
int pwrdm_clear_all_prev_pwrst(struct powerdomain *pwrdm);
int pwrdm_set_logic_retst(struct powerdomain *pwrdm, u8 pwrst);
int pwrdm_set_mem_onst(struct powerdomain *pwrdm, u8 bank, u8 pwrst);
int pwrdm_set_mem_retst(struct powerdomain *pwrdm, u8 bank, u8 pwrst);
int pwrdm_read_logic_pwrst(struct powerdomain *pwrdm);
int pwrdm_read_prev_logic_pwrst(struct powerdomain *pwrdm);
OMAP2/3 PM: Adding powerdomain APIs for reading the next logic and mem state This patch adds APIs pwrdm_read_logic_retst and pwrdm_read_mem_retst for reading the next programmed logic and memory state a powerdomain is to hit in event of the next power domain state being retention. These are needed for OSWR support. Signed-off-by: Thara Gopinath <thara@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-02-24 19:05:49 +00:00
int pwrdm_read_logic_retst(struct powerdomain *pwrdm);
ARM: OMAP2: Powerdomain: Add base OMAP2/3 powerdomain code This patch creates an interface to the powerdomain registers in the PRM/CM modules on OMAP2/3. This interface is intended to be used by PM code, e.g., pm.c; not by device drivers directly. Each powerdomain will be defined in later patches as static structures. Also defined are dependencies between powerdomains, used for adding and removing PM_WKDEP and CM_SLEEPDEP bits. The powerdomain structures are linked into a list at boot by pwrdm_register(), similar to the OMAP clock code. The patch adds a Kconfig option, CONFIG_OMAP_DEBUG_POWERDOMAIN, which when enabled will emit verbose debug messages via pr_debug(). Signed-off-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-08-19 08:08:40 +00:00
int pwrdm_read_mem_pwrst(struct powerdomain *pwrdm, u8 bank);
int pwrdm_read_prev_mem_pwrst(struct powerdomain *pwrdm, u8 bank);
OMAP2/3 PM: Adding powerdomain APIs for reading the next logic and mem state This patch adds APIs pwrdm_read_logic_retst and pwrdm_read_mem_retst for reading the next programmed logic and memory state a powerdomain is to hit in event of the next power domain state being retention. These are needed for OSWR support. Signed-off-by: Thara Gopinath <thara@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2010-02-24 19:05:49 +00:00
int pwrdm_read_mem_retst(struct powerdomain *pwrdm, u8 bank);
ARM: OMAP2: Powerdomain: Add base OMAP2/3 powerdomain code This patch creates an interface to the powerdomain registers in the PRM/CM modules on OMAP2/3. This interface is intended to be used by PM code, e.g., pm.c; not by device drivers directly. Each powerdomain will be defined in later patches as static structures. Also defined are dependencies between powerdomains, used for adding and removing PM_WKDEP and CM_SLEEPDEP bits. The powerdomain structures are linked into a list at boot by pwrdm_register(), similar to the OMAP clock code. The patch adds a Kconfig option, CONFIG_OMAP_DEBUG_POWERDOMAIN, which when enabled will emit verbose debug messages via pr_debug(). Signed-off-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-08-19 08:08:40 +00:00
[ARM] OMAP3 pwrdm: add hardware save-and-restore (SAR) support OMAP3430ES2+ introduces a new feature: optional powerdomain context hardware save-and-restore (SAR). Currently, this feature only applies to USBHOST and USBTLL module context when the USBHOST or CORE powerdomains enter a low-power sleep state[1]. This feature avoids re-enumeration of USB devices when the powerdomains return from idle, which is potentially time-consuming. This patch adds support for enabling and disabling hardware save-and-restore to the powerdomain code. Three new functions are added, pwrdm_enable_hdwr_sar(), pwrdm_disable_hdwr_sar(), and pwrdm_can_hdwr_sar(). A new struct powerdomain "flags" field is added, with a PWRDM_HAS_HDWR_SAR flag to indicate powerdomains with SAR support. Thanks to Jouni Högander <jouni.hogander@nokia.com> for reviewing an earlier version of these patches, and Richard Woodruff <r-woodruff2@ti.com> for clarifying the purpose of these bits. 1. For the USBHOST controller module, context loss occurs when the USBHOST powerdomain enters off-idle. For USBTLL, context loss occurs either if CORE enters off-idle, or if the CORE logic is configured to turn off when CORE enters retention-idle (OSWR). 34xx ES2 TRM 4.8.6.1.1, 4.8.6.1.2 Signed-off-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-06-26 00:09:37 +00:00
int pwrdm_enable_hdwr_sar(struct powerdomain *pwrdm);
int pwrdm_disable_hdwr_sar(struct powerdomain *pwrdm);
bool pwrdm_has_hdwr_sar(struct powerdomain *pwrdm);
ARM: OMAP2+: powerdomain/clockdomain: add a per-powerdomain spinlock Add a per-powerdomain spinlock. Use that instead of the clockdomain spinlock. Add pwrdm_lock()/pwrdm_unlock() functions to allow other code to acquire or release the powerdomain spinlock without reaching directly into the struct powerdomain. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Jean Pihet <jean.pihet@newoldbits.com>
2013-01-26 07:58:16 +00:00
int pwrdm_state_switch_nolock(struct powerdomain *pwrdm);
OMAP: PM counter infrastructure. This patch provides the infrastructure to count how many times a powerdomain entered a given power state (on, inactive, retention, off). A number of functions are provided which will be called by the chip specific powerdomain and clockdomain code whenever a transition might have happened. Signed-off-by: Peter 'p2' De Schrijver <peter.de-schrijver@nokia.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2008-10-15 14:48:43 +00:00
int pwrdm_state_switch(struct powerdomain *pwrdm);
ARM: OMAP2+: powerdomain: allow pre/post transtion to be per pwrdm Iteration over all power domains in the idle path is unnecessary since only power domains that are transitioning need to be accounted for. Also PRCM register accesses are known to be expensive, so the additional latency added to the idle path is signficiant. In order allow the pre/post transitions to be isolated and called per-pwrdm, change the API so passing in a specific power domain will trigger the pre/post transtion accounting for only that specific power domain. Passing NULL means iterating over all power domains as is current behavior. Reviewed-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Grazvydas Ignotas <notasas@gmail.com> Acked-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Kevin Hilman <khilman@ti.com>
2012-05-11 23:00:24 +00:00
int pwrdm_pre_transition(struct powerdomain *pwrdm);
int pwrdm_post_transition(struct powerdomain *pwrdm);
ARM: OMAP: change get_context_loss_count ret value to int get_context_loss_count functions return context loss count as u32, and zero means an error. However, zero is also returned when context has never been lost and could also be returned when the context loss count has wrapped and goes to zero. Change the functions to return an int, with negative value meaning an error. OMAP HSMMC code uses omap_pm_get_dev_context_loss_count(), but as the hsmmc code handles the returned value as an int, with negative value meaning an error, this patch actually fixes hsmmc code also. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Acked-by: Kevin Hilman <khilman@ti.com> Acked-by: Paul Walmsley <paul@pwsan.com> [tony@atomide.com: updated to fix a warning with recent dmtimer changes] Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-06-09 13:56:23 +00:00
int pwrdm_get_context_loss_count(struct powerdomain *pwrdm);
OMAP2+: powerdomain: add pwrdm_can_ever_lose_context() Some drivers wish to know whether the device that they control can ever lose context, for example, when the device's enclosing powerdomain loses power. They can use this information to determine whether it is necessary to save and restore device context, or whether it can be skipped. Implement the powerdomain portion of this by adding the function pwrdm_can_ever_lose_context(). This is not for use directly from driver code, but instead is intended to be called from driver-subarch integration code (i.e., arch/arm/*omap* code). Currently, the result from this function should be passed into the driver code via struct platform_data, but at some point this should be part of some common or OMAP-specific device code. While here, update file copyrights. Signed-off-by: Paul Walmsley <paul@pwsan.com>
2011-03-08 02:28:15 +00:00
bool pwrdm_can_ever_lose_context(struct powerdomain *pwrdm);
OMAP: PM counter infrastructure. This patch provides the infrastructure to count how many times a powerdomain entered a given power state (on, inactive, retention, off). A number of functions are provided which will be called by the chip specific powerdomain and clockdomain code whenever a transition might have happened. Signed-off-by: Peter 'p2' De Schrijver <peter.de-schrijver@nokia.com> Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2008-10-15 14:48:43 +00:00
ARM: OMAP2+: PM/powerdomain: move omap_set_pwrdm_state() to powerdomain code Move omap_set_pwrdm_state() from the PM code to the powerdomain code, and refactor it to split it up into several functions. A subsequent patch will rename it to conform with the existing powerdomain function names. This version includes some additional documentation, based on a suggestion from Jean Pihet. It also modifies omap_set_pwrdm_state() to not bail out early unless both the powerdomain current power state and the next power state are equal. (Previously it would terminate early if the next power state was equal to the target power state, which was insufficiently rigorous.) Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Jean Pihet <jean.pihet@newoldbits.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Tero Kristo <t-kristo@ti.com>
2013-01-29 20:45:09 +00:00
extern int omap_set_pwrdm_state(struct powerdomain *pwrdm, u8 state);
OMAP: powerdomain: remove omap_chip bitmasks At Tony's request, remove the omap_chip bitmasks from the powerdomain definitions. Instead, initialize powerdomains based on one or more lists that are applicable to a particular SoC family, variant, and silicon revision. Gražvydas Ignotas <notasas@gmail.com> found and reported a bug in a related patch that also applied to this patch - thanks Gražvydas. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Gražvydas Ignotas <notasas@gmail.com>
2011-09-14 17:34:21 +00:00
extern void omap242x_powerdomains_init(void);
extern void omap243x_powerdomains_init(void);
OMAP2+: powerdomains: move powerdomain static data to .c files Static data should be declared in .c files, not .h files. It should be possible to #include .h files at any point without creating multiple copies of the same data. We converted the clock data to .c files some time ago. This patch does the same for the powerdomain data. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 03:01:20 +00:00
extern void omap3xxx_powerdomains_init(void);
ARM: OMAP AM33xx: powerdomains: add AM335x support Add offset & mask fields to struct powerdomain In case of AM33xx family of devices, there is no consistency between PWRSTCTRL & PWRSTST register offsers in PRM space, for example - PRM_XXX PWRSTCTRL PWRSTST ======================================= PRM_PER_MOD: 0x0C, 0x08 PRM_WKUP_MOD: 0x04, 0x08 PRM_MPU_MOD: 0x00, 0x04 PRM_DEVICE_MOD: NA, NA And also, there is no consistency between bit-offsets inside PWRSTCTRL & PWRSTST register, for example - PRM_XXX LOGICRET MEMON MEMRET ======================================= GFX_PWRCTRL: 2, 17, 6 PER_PWRCTRL: 3, 25, 29 MPU_PWRCTRL: 2, 18, 22 WKUP_PWRCTRL: 3, NA, NA This means, we need to maintain and pass on all this information in powerdomain handle; so adding fields for, - PWRSTCTRL/ST register offset - Logic retention state mask - mem_on/ret/pwrst/retst mask Currently, this fields is only applicable and used for AM33XX devices. Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com> Cc: Benoit Cousson <b-cousson@ti.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Kevin Hilman <khilman@ti.com> Cc: Paul Walmsley <paul@pwsan.com> Cc: Rajendra Nayak <rnayak@ti.com> [paul@pwsan.com: this patch is a combination of "Add offset & mask fields to struct powerdomain" and the powerdomain portions of "ARM: OMAP3+: am33xx: Add powerdomain & PRM support"; updated for 3.5] Signed-off-by: Paul Walmsley <paul@pwsan.com>
2012-06-18 06:47:27 +00:00
extern void am33xx_powerdomains_init(void);
OMAP2+: powerdomains: move powerdomain static data to .c files Static data should be declared in .c files, not .h files. It should be possible to #include .h files at any point without creating multiple copies of the same data. We converted the clock data to .c files some time ago. This patch does the same for the powerdomain data. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 03:01:20 +00:00
extern void omap44xx_powerdomains_init(void);
ARM: OMAP5: powerdomain data: Add OMAP54XX data and update the header Add the data file to describe all power domains inside the OMAP54XX soc. Cc: Paul Walmsley <paul@pwsan.com> Signed-off-by: Benoit Cousson <b-cousson@ti.com> [santosh.shilimkar@ti.com: Generated es2.0 data] Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com>
2013-05-29 16:38:09 +00:00
extern void omap54xx_powerdomains_init(void);
ARM: OMAP: DRA7: powerdomain: Add DRA7XX data and update header Add the data file to describe all power domains inside the DRA7XX SoC. Signed-off-by: Ambresh K <ambresh@ti.com> Signed-off-by: Tero Kristo <t-kristo@ti.com> Signed-off-by: Rajendra Nayak <rnayak@ti.com> [paul@pwsan.com: added generation notation to comments] Signed-off-by: Paul Walmsley <paul@pwsan.com>
2013-07-09 07:32:13 +00:00
extern void dra7xx_powerdomains_init(void);
OMAP2+: powerdomains: move powerdomain static data to .c files Static data should be declared in .c files, not .h files. It should be possible to #include .h files at any point without creating multiple copies of the same data. We converted the clock data to .c files some time ago. This patch does the same for the powerdomain data. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Tested-by: Rajendra Nayak <rnayak@ti.com>
2010-12-22 03:01:20 +00:00
OMAP2+: powerdomain: move header file from plat-omap to mach-omap2 The OMAP powerdomain code and data is all OMAP2+-specific. This seems unlikely to change any time soon. Move plat-omap/include/plat/powerdomain.h to mach-omap2/powerdomain.h. The primary point of doing this is to remove the temptation for unrelated upper-layer code to access powerdomain code and data directly. As part of this process, remove the references to powerdomain data from the GPIO "driver" and the OMAP PM no-op layer, both in plat-omap. Change the DSPBridge code to point to the new location for the powerdomain headers. The DSPBridge code should not be including the powerdomain headers; these should be removed. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Omar Ramirez Luna <omar.ramirez@ti.com> Cc: Felipe Contreras <felipe.contreras@gmail.com> Cc: Greg Kroah-Hartman <greg@kroah.com>
2010-12-22 04:05:16 +00:00
extern struct pwrdm_ops omap2_pwrdm_operations;
extern struct pwrdm_ops omap3_pwrdm_operations;
ARM: OMAP AM33xx: powerdomains: add AM335x support Add offset & mask fields to struct powerdomain In case of AM33xx family of devices, there is no consistency between PWRSTCTRL & PWRSTST register offsers in PRM space, for example - PRM_XXX PWRSTCTRL PWRSTST ======================================= PRM_PER_MOD: 0x0C, 0x08 PRM_WKUP_MOD: 0x04, 0x08 PRM_MPU_MOD: 0x00, 0x04 PRM_DEVICE_MOD: NA, NA And also, there is no consistency between bit-offsets inside PWRSTCTRL & PWRSTST register, for example - PRM_XXX LOGICRET MEMON MEMRET ======================================= GFX_PWRCTRL: 2, 17, 6 PER_PWRCTRL: 3, 25, 29 MPU_PWRCTRL: 2, 18, 22 WKUP_PWRCTRL: 3, NA, NA This means, we need to maintain and pass on all this information in powerdomain handle; so adding fields for, - PWRSTCTRL/ST register offset - Logic retention state mask - mem_on/ret/pwrst/retst mask Currently, this fields is only applicable and used for AM33XX devices. Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com> Cc: Benoit Cousson <b-cousson@ti.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Kevin Hilman <khilman@ti.com> Cc: Paul Walmsley <paul@pwsan.com> Cc: Rajendra Nayak <rnayak@ti.com> [paul@pwsan.com: this patch is a combination of "Add offset & mask fields to struct powerdomain" and the powerdomain portions of "ARM: OMAP3+: am33xx: Add powerdomain & PRM support"; updated for 3.5] Signed-off-by: Paul Walmsley <paul@pwsan.com>
2012-06-18 06:47:27 +00:00
extern struct pwrdm_ops am33xx_pwrdm_operations;
OMAP2+: powerdomain: move header file from plat-omap to mach-omap2 The OMAP powerdomain code and data is all OMAP2+-specific. This seems unlikely to change any time soon. Move plat-omap/include/plat/powerdomain.h to mach-omap2/powerdomain.h. The primary point of doing this is to remove the temptation for unrelated upper-layer code to access powerdomain code and data directly. As part of this process, remove the references to powerdomain data from the GPIO "driver" and the OMAP PM no-op layer, both in plat-omap. Change the DSPBridge code to point to the new location for the powerdomain headers. The DSPBridge code should not be including the powerdomain headers; these should be removed. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Omar Ramirez Luna <omar.ramirez@ti.com> Cc: Felipe Contreras <felipe.contreras@gmail.com> Cc: Greg Kroah-Hartman <greg@kroah.com>
2010-12-22 04:05:16 +00:00
extern struct pwrdm_ops omap4_pwrdm_operations;
/* Common Internal functions used across OMAP rev's */
extern u32 omap2_pwrdm_get_mem_bank_onstate_mask(u8 bank);
extern u32 omap2_pwrdm_get_mem_bank_retst_mask(u8 bank);
extern u32 omap2_pwrdm_get_mem_bank_stst_mask(u8 bank);
extern struct powerdomain wkup_omap2_pwrdm;
extern struct powerdomain gfx_omap2_pwrdm;
ARM: OMAP2+: powerdomain/clockdomain: add a per-powerdomain spinlock Add a per-powerdomain spinlock. Use that instead of the clockdomain spinlock. Add pwrdm_lock()/pwrdm_unlock() functions to allow other code to acquire or release the powerdomain spinlock without reaching directly into the struct powerdomain. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Jean Pihet <jean.pihet@newoldbits.com>
2013-01-26 07:58:16 +00:00
extern void pwrdm_lock(struct powerdomain *pwrdm);
extern void pwrdm_unlock(struct powerdomain *pwrdm);
OMAP2+: powerdomain: move header file from plat-omap to mach-omap2 The OMAP powerdomain code and data is all OMAP2+-specific. This seems unlikely to change any time soon. Move plat-omap/include/plat/powerdomain.h to mach-omap2/powerdomain.h. The primary point of doing this is to remove the temptation for unrelated upper-layer code to access powerdomain code and data directly. As part of this process, remove the references to powerdomain data from the GPIO "driver" and the OMAP PM no-op layer, both in plat-omap. Change the DSPBridge code to point to the new location for the powerdomain headers. The DSPBridge code should not be including the powerdomain headers; these should be removed. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Omar Ramirez Luna <omar.ramirez@ti.com> Cc: Felipe Contreras <felipe.contreras@gmail.com> Cc: Greg Kroah-Hartman <greg@kroah.com>
2010-12-22 04:05:16 +00:00
ARM: OMAP2: Powerdomain: Add base OMAP2/3 powerdomain code This patch creates an interface to the powerdomain registers in the PRM/CM modules on OMAP2/3. This interface is intended to be used by PM code, e.g., pm.c; not by device drivers directly. Each powerdomain will be defined in later patches as static structures. Also defined are dependencies between powerdomains, used for adding and removing PM_WKDEP and CM_SLEEPDEP bits. The powerdomain structures are linked into a list at boot by pwrdm_register(), similar to the OMAP clock code. The patch adds a Kconfig option, CONFIG_OMAP_DEBUG_POWERDOMAIN, which when enabled will emit verbose debug messages via pr_debug(). Signed-off-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2008-08-19 08:08:40 +00:00
#endif
Reference in New Issue Copy Permalink