linux/sound/pci/hda/hda_intel.c

3899 lines
105 KiB
C
Raw Normal View History

/*
*
* hda_intel.c - Implementation of primary alsa driver code base
* for Intel HD Audio.
*
* Copyright(c) 2004 Intel Corporation. All rights reserved.
*
* Copyright (c) 2004 Takashi Iwai <tiwai@suse.de>
* PeiSen Hou <pshou@realtek.com.tw>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the Free
* Software Foundation; either version 2 of the License, or (at your option)
* any later version.
*
* This program is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along with
* this program; if not, write to the Free Software Foundation, Inc., 59
* Temple Place - Suite 330, Boston, MA 02111-1307, USA.
*
* CONTACTS:
*
* Matt Jared matt.jared@intel.com
* Andy Kopp andy.kopp@intel.com
* Dan Kogan dan.d.kogan@intel.com
*
* CHANGES:
*
* 2004.12.01 Major rewrite by tiwai, merged the work of pshou
*
*/
#include <linux/delay.h>
#include <linux/interrupt.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/dma-mapping.h>
#include <linux/moduleparam.h>
#include <linux/init.h>
#include <linux/slab.h>
#include <linux/pci.h>
#include <linux/mutex.h>
#include <linux/reboot.h>
#include <linux/io.h>
ALSA: hda - add runtime PM support Runtime PM can bring more power saving: - When the controller is suspended, its parent device will also have a chance to suspend. - PCI subsystem can choose the lowest power state the controller can signal wake up from. This state can be D3cold on platforms with ACPI PM support. And runtime PM can provide a gerneral sysfs interface for a system policy manager. Runtime PM support is based on current HDA power saving implementation. The user can enable runtime PM on platfroms that provide acceptable latency on transition from D3 to D0. Details: - When both power saving and runtime PM are enabled: -- If a codec supports 'stop-clock' in D3, it will request suspending the controller after it enters D3 and request resuming the controller before back to D0. Thus the controller will be suspended only when all codecs are suspended and support stop-clock in D3. -- User IO operations and HW wakeup signal can resume the controller back to D0. - If runtime PM is disabled, power saving just works as before. - If power saving is disabled, the controller won't be suspended because the power usage counter can never be 0. More about 'stop-clock' feature: If a codec can support targeted pass-through operations in D3 state when there is no BCLK present on the link, it will set CLKSTOP flag in the supported power states and report PS-ClkStopOk when entering D3 state. Please refer to HDA spec section 7.3.3.10 Power state and 7.3.4.12 Supported Power State. [Fixed CONFIG_PM_RUNTIME dependency in hda_intel.c by tiwai] Signed-off-by: Mengdong Lin <mengdong.lin@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-08-23 09:32:30 +00:00
#include <linux/pm_runtime.h>
#include <linux/clocksource.h>
#include <linux/time.h>
#include <linux/completion.h>
#ifdef CONFIG_X86
/* for snoop control */
#include <asm/pgtable.h>
#include <asm/cacheflush.h>
#endif
#include <sound/core.h>
#include <sound/initval.h>
#include <linux/vgaarb.h>
#include <linux/vga_switcheroo.h>
#include <linux/firmware.h>
#include "hda_codec.h"
static int index[SNDRV_CARDS] = SNDRV_DEFAULT_IDX;
static char *id[SNDRV_CARDS] = SNDRV_DEFAULT_STR;
static bool enable[SNDRV_CARDS] = SNDRV_DEFAULT_ENABLE_PNP;
static char *model[SNDRV_CARDS];
static int position_fix[SNDRV_CARDS] = {[0 ... (SNDRV_CARDS-1)] = -1};
static int bdl_pos_adj[SNDRV_CARDS] = {[0 ... (SNDRV_CARDS-1)] = -1};
static int probe_mask[SNDRV_CARDS] = {[0 ... (SNDRV_CARDS-1)] = -1};
static int probe_only[SNDRV_CARDS];
static int jackpoll_ms[SNDRV_CARDS];
static bool single_cmd;
static int enable_msi = -1;
#ifdef CONFIG_SND_HDA_PATCH_LOADER
static char *patch[SNDRV_CARDS];
#endif
#ifdef CONFIG_SND_HDA_INPUT_BEEP
static bool beep_mode[SNDRV_CARDS] = {[0 ... (SNDRV_CARDS-1)] =
CONFIG_SND_HDA_INPUT_BEEP_MODE};
#endif
module_param_array(index, int, NULL, 0444);
MODULE_PARM_DESC(index, "Index value for Intel HD audio interface.");
module_param_array(id, charp, NULL, 0444);
MODULE_PARM_DESC(id, "ID string for Intel HD audio interface.");
module_param_array(enable, bool, NULL, 0444);
MODULE_PARM_DESC(enable, "Enable Intel HD audio interface.");
module_param_array(model, charp, NULL, 0444);
MODULE_PARM_DESC(model, "Use the given board model.");
module_param_array(position_fix, int, NULL, 0444);
MODULE_PARM_DESC(position_fix, "DMA pointer read method."
"(-1 = system default, 0 = auto, 1 = LPIB, 2 = POSBUF, 3 = VIACOMBO, 4 = COMBO).");
module_param_array(bdl_pos_adj, int, NULL, 0644);
MODULE_PARM_DESC(bdl_pos_adj, "BDL position adjustment offset.");
module_param_array(probe_mask, int, NULL, 0444);
MODULE_PARM_DESC(probe_mask, "Bitmask to probe codecs (default = -1).");
module_param_array(probe_only, int, NULL, 0444);
MODULE_PARM_DESC(probe_only, "Only probing and no codec initialization.");
module_param_array(jackpoll_ms, int, NULL, 0444);
MODULE_PARM_DESC(jackpoll_ms, "Ms between polling for jack events (default = 0, using unsol events only)");
module_param(single_cmd, bool, 0444);
MODULE_PARM_DESC(single_cmd, "Use single command to communicate with codecs "
"(for debugging only).");
module_param(enable_msi, bint, 0444);
MODULE_PARM_DESC(enable_msi, "Enable Message Signaled Interrupt (MSI)");
#ifdef CONFIG_SND_HDA_PATCH_LOADER
module_param_array(patch, charp, NULL, 0444);
MODULE_PARM_DESC(patch, "Patch file for Intel HD audio interface.");
#endif
#ifdef CONFIG_SND_HDA_INPUT_BEEP
module_param_array(beep_mode, bool, NULL, 0444);
MODULE_PARM_DESC(beep_mode, "Select HDA Beep registration mode "
"(0=off, 1=on) (default=1).");
#endif
#ifdef CONFIG_PM
static int param_set_xint(const char *val, const struct kernel_param *kp);
static struct kernel_param_ops param_ops_xint = {
.set = param_set_xint,
.get = param_get_int,
};
#define param_check_xint param_check_int
static int power_save = CONFIG_SND_HDA_POWER_SAVE_DEFAULT;
module_param(power_save, xint, 0644);
MODULE_PARM_DESC(power_save, "Automatic power-saving timeout "
"(in second, 0 = disable).");
/* reset the HD-audio controller in power save mode.
* this may give more power-saving, but will take longer time to
* wake up.
*/
static int power_save_controller = -1;
module_param(power_save_controller, bint, 0644);
MODULE_PARM_DESC(power_save_controller, "Reset controller in power save mode.");
#endif /* CONFIG_PM */
static int align_buffer_size = -1;
module_param(align_buffer_size, bint, 0644);
MODULE_PARM_DESC(align_buffer_size,
"Force buffer and period sizes to be multiple of 128 bytes.");
#ifdef CONFIG_X86
static bool hda_snoop = true;
module_param_named(snoop, hda_snoop, bool, 0444);
MODULE_PARM_DESC(snoop, "Enable/disable snooping");
#define azx_snoop(chip) (chip)->snoop
#else
#define hda_snoop true
#define azx_snoop(chip) true
#endif
MODULE_LICENSE("GPL");
MODULE_SUPPORTED_DEVICE("{{Intel, ICH6},"
"{Intel, ICH6M},"
"{Intel, ICH7},"
"{Intel, ESB2},"
"{Intel, ICH8},"
"{Intel, ICH9},"
"{Intel, ICH10},"
"{Intel, PCH},"
"{Intel, CPT},"
"{Intel, PPT},"
"{Intel, LPT},"
"{Intel, LPT_LP},"
"{Intel, HPT},"
"{Intel, PBG},"
"{Intel, SCH},"
"{ATI, SB450},"
"{ATI, SB600},"
"{ATI, RS600},"
"{ATI, RS690},"
"{ATI, RS780},"
"{ATI, R600},"
"{ATI, RV630},"
"{ATI, RV610},"
"{ATI, RV670},"
"{ATI, RV635},"
"{ATI, RV620},"
"{ATI, RV770},"
"{VIA, VT8251},"
"{VIA, VT8237A},"
"{SiS, SIS966},"
"{ULI, M5461}}");
MODULE_DESCRIPTION("Intel HDA driver");
#ifdef CONFIG_SND_VERBOSE_PRINTK
#define SFX /* nop */
#else
#define SFX "hda-intel "
#endif
#if defined(CONFIG_PM) && defined(CONFIG_VGA_SWITCHEROO)
#ifdef CONFIG_SND_HDA_CODEC_HDMI
#define SUPPORT_VGA_SWITCHEROO
#endif
#endif
/*
* registers
*/
#define ICH6_REG_GCAP 0x00
#define ICH6_GCAP_64OK (1 << 0) /* 64bit address support */
#define ICH6_GCAP_NSDO (3 << 1) /* # of serial data out signals */
#define ICH6_GCAP_BSS (31 << 3) /* # of bidirectional streams */
#define ICH6_GCAP_ISS (15 << 8) /* # of input streams */
#define ICH6_GCAP_OSS (15 << 12) /* # of output streams */
#define ICH6_REG_VMIN 0x02
#define ICH6_REG_VMAJ 0x03
#define ICH6_REG_OUTPAY 0x04
#define ICH6_REG_INPAY 0x06
#define ICH6_REG_GCTL 0x08
#define ICH6_GCTL_RESET (1 << 0) /* controller reset */
#define ICH6_GCTL_FCNTRL (1 << 1) /* flush control */
#define ICH6_GCTL_UNSOL (1 << 8) /* accept unsol. response enable */
#define ICH6_REG_WAKEEN 0x0c
#define ICH6_REG_STATESTS 0x0e
#define ICH6_REG_GSTS 0x10
#define ICH6_GSTS_FSTS (1 << 1) /* flush status */
#define ICH6_REG_INTCTL 0x20
#define ICH6_REG_INTSTS 0x24
#define ICH6_REG_WALLCLK 0x30 /* 24Mhz source */
#define ICH6_REG_OLD_SSYNC 0x34 /* SSYNC for old ICH */
#define ICH6_REG_SSYNC 0x38
#define ICH6_REG_CORBLBASE 0x40
#define ICH6_REG_CORBUBASE 0x44
#define ICH6_REG_CORBWP 0x48
#define ICH6_REG_CORBRP 0x4a
#define ICH6_CORBRP_RST (1 << 15) /* read pointer reset */
#define ICH6_REG_CORBCTL 0x4c
#define ICH6_CORBCTL_RUN (1 << 1) /* enable DMA */
#define ICH6_CORBCTL_CMEIE (1 << 0) /* enable memory error irq */
#define ICH6_REG_CORBSTS 0x4d
#define ICH6_CORBSTS_CMEI (1 << 0) /* memory error indication */
#define ICH6_REG_CORBSIZE 0x4e
#define ICH6_REG_RIRBLBASE 0x50
#define ICH6_REG_RIRBUBASE 0x54
#define ICH6_REG_RIRBWP 0x58
#define ICH6_RIRBWP_RST (1 << 15) /* write pointer reset */
#define ICH6_REG_RINTCNT 0x5a
#define ICH6_REG_RIRBCTL 0x5c
#define ICH6_RBCTL_IRQ_EN (1 << 0) /* enable IRQ */
#define ICH6_RBCTL_DMA_EN (1 << 1) /* enable DMA */
#define ICH6_RBCTL_OVERRUN_EN (1 << 2) /* enable overrun irq */
#define ICH6_REG_RIRBSTS 0x5d
#define ICH6_RBSTS_IRQ (1 << 0) /* response irq */
#define ICH6_RBSTS_OVERRUN (1 << 2) /* overrun irq */
#define ICH6_REG_RIRBSIZE 0x5e
#define ICH6_REG_IC 0x60
#define ICH6_REG_IR 0x64
#define ICH6_REG_IRS 0x68
#define ICH6_IRS_VALID (1<<1)
#define ICH6_IRS_BUSY (1<<0)
#define ICH6_REG_DPLBASE 0x70
#define ICH6_REG_DPUBASE 0x74
#define ICH6_DPLBASE_ENABLE 0x1 /* Enable position buffer */
/* SD offset: SDI0=0x80, SDI1=0xa0, ... SDO3=0x160 */
enum { SDI0, SDI1, SDI2, SDI3, SDO0, SDO1, SDO2, SDO3 };
/* stream register offsets from stream base */
#define ICH6_REG_SD_CTL 0x00
#define ICH6_REG_SD_STS 0x03
#define ICH6_REG_SD_LPIB 0x04
#define ICH6_REG_SD_CBL 0x08
#define ICH6_REG_SD_LVI 0x0c
#define ICH6_REG_SD_FIFOW 0x0e
#define ICH6_REG_SD_FIFOSIZE 0x10
#define ICH6_REG_SD_FORMAT 0x12
#define ICH6_REG_SD_BDLPL 0x18
#define ICH6_REG_SD_BDLPU 0x1c
/* PCI space */
#define ICH6_PCIREG_TCSEL 0x44
/*
* other constants
*/
/* max number of SDs */
/* ICH, ATI and VIA have 4 playback and 4 capture */
#define ICH6_NUM_CAPTURE 4
#define ICH6_NUM_PLAYBACK 4
/* ULI has 6 playback and 5 capture */
#define ULI_NUM_CAPTURE 5
#define ULI_NUM_PLAYBACK 6
/* ATI HDMI has 1 playback and 0 capture */
#define ATIHDMI_NUM_CAPTURE 0
#define ATIHDMI_NUM_PLAYBACK 1
/* TERA has 4 playback and 3 capture */
#define TERA_NUM_CAPTURE 3
#define TERA_NUM_PLAYBACK 4
/* this number is statically defined for simplicity */
#define MAX_AZX_DEV 16
/* max number of fragments - we may use more if allocating more pages for BDL */
#define BDL_SIZE 4096
#define AZX_MAX_BDL_ENTRIES (BDL_SIZE / 16)
#define AZX_MAX_FRAG 32
/* max buffer size - no h/w limit, you can increase as you like */
#define AZX_MAX_BUF_SIZE (1024*1024*1024)
/* RIRB int mask: overrun[2], response[0] */
#define RIRB_INT_RESPONSE 0x01
#define RIRB_INT_OVERRUN 0x04
#define RIRB_INT_MASK 0x05
/* STATESTS int mask: S3,SD2,SD1,SD0 */
#define AZX_MAX_CODECS 8
#define AZX_DEFAULT_CODECS 4
#define STATESTS_INT_MASK ((1 << AZX_MAX_CODECS) - 1)
/* SD_CTL bits */
#define SD_CTL_STREAM_RESET 0x01 /* stream reset bit */
#define SD_CTL_DMA_START 0x02 /* stream DMA start bit */
#define SD_CTL_STRIPE (3 << 16) /* stripe control */
#define SD_CTL_TRAFFIC_PRIO (1 << 18) /* traffic priority */
#define SD_CTL_DIR (1 << 19) /* bi-directional stream */
#define SD_CTL_STREAM_TAG_MASK (0xf << 20)
#define SD_CTL_STREAM_TAG_SHIFT 20
/* SD_CTL and SD_STS */
#define SD_INT_DESC_ERR 0x10 /* descriptor error interrupt */
#define SD_INT_FIFO_ERR 0x08 /* FIFO error interrupt */
#define SD_INT_COMPLETE 0x04 /* completion interrupt */
#define SD_INT_MASK (SD_INT_DESC_ERR|SD_INT_FIFO_ERR|\
SD_INT_COMPLETE)
/* SD_STS */
#define SD_STS_FIFO_READY 0x20 /* FIFO ready */
/* INTCTL and INTSTS */
#define ICH6_INT_ALL_STREAM 0xff /* all stream interrupts */
#define ICH6_INT_CTRL_EN 0x40000000 /* controller interrupt enable bit */
#define ICH6_INT_GLOBAL_EN 0x80000000 /* global interrupt enable bit */
/* below are so far hardcoded - should read registers in future */
#define ICH6_MAX_CORB_ENTRIES 256
#define ICH6_MAX_RIRB_ENTRIES 256
/* position fix mode */
enum {
POS_FIX_AUTO,
POS_FIX_LPIB,
POS_FIX_POSBUF,
POS_FIX_VIACOMBO,
POS_FIX_COMBO,
};
/* Defines for ATI HD Audio support in SB450 south bridge */
#define ATI_SB450_HDAUDIO_MISC_CNTR2_ADDR 0x42
#define ATI_SB450_HDAUDIO_ENABLE_SNOOP 0x02
/* Defines for Nvidia HDA support */
#define NVIDIA_HDA_TRANSREG_ADDR 0x4e
#define NVIDIA_HDA_ENABLE_COHBITS 0x0f
#define NVIDIA_HDA_ISTRM_COH 0x4d
#define NVIDIA_HDA_OSTRM_COH 0x4c
#define NVIDIA_HDA_ENABLE_COHBIT 0x01
/* Defines for Intel SCH HDA snoop control */
#define INTEL_SCH_HDA_DEVC 0x78
#define INTEL_SCH_HDA_DEVC_NOSNOOP (0x1<<11)
/* Define IN stream 0 FIFO size offset in VIA controller */
#define VIA_IN_STREAM0_FIFO_SIZE_OFFSET 0x90
/* Define VIA HD Audio Device ID*/
#define VIA_HDAC_DEVICE_ID 0x3288
/* HD Audio class code */
#define PCI_CLASS_MULTIMEDIA_HD_AUDIO 0x0403
/*
*/
struct azx_dev {
struct snd_dma_buffer bdl; /* BDL buffer */
u32 *posbuf; /* position buffer pointer */
unsigned int bufsize; /* size of the play buffer in bytes */
unsigned int period_bytes; /* size of the period in bytes */
unsigned int frags; /* number for period in the play buffer */
unsigned int fifo_size; /* FIFO size */
unsigned long start_wallclk; /* start + minimum wallclk */
unsigned long period_wallclk; /* wallclk for period */
void __iomem *sd_addr; /* stream descriptor pointer */
u32 sd_int_sta_mask; /* stream int status mask */
/* pcm support */
struct snd_pcm_substream *substream; /* assigned substream,
* set in PCM open
*/
unsigned int format_val; /* format value to be set in the
* controller and the codec
*/
unsigned char stream_tag; /* assigned stream */
unsigned char index; /* stream index */
int assigned_key; /* last device# key assigned to */
unsigned int opened :1;
unsigned int running :1;
unsigned int irq_pending :1;
/*
* For VIA:
* A flag to ensure DMA position is 0
* when link position is not greater than FIFO size
*/
unsigned int insufficient :1;
unsigned int wc_marked:1;
unsigned int no_period_wakeup:1;
struct timecounter azx_tc;
struct cyclecounter azx_cc;
};
/* CORB/RIRB */
struct azx_rb {
u32 *buf; /* CORB/RIRB buffer
* Each CORB entry is 4byte, RIRB is 8byte
*/
dma_addr_t addr; /* physical address of CORB/RIRB buffer */
/* for RIRB */
unsigned short rp, wp; /* read/write pointers */
int cmds[AZX_MAX_CODECS]; /* number of pending requests */
u32 res[AZX_MAX_CODECS]; /* last read value */
};
struct azx_pcm {
struct azx *chip;
struct snd_pcm *pcm;
struct hda_codec *codec;
struct hda_pcm_stream *hinfo[2];
struct list_head list;
};
struct azx {
struct snd_card *card;
struct pci_dev *pci;
int dev_index;
/* chip type specific */
int driver_type;
unsigned int driver_caps;
int playback_streams;
int playback_index_offset;
int capture_streams;
int capture_index_offset;
int num_streams;
/* pci resources */
unsigned long addr;
void __iomem *remap_addr;
int irq;
/* locks */
spinlock_t reg_lock;
struct mutex open_mutex;
struct completion probe_wait;
/* streams (x num_streams) */
struct azx_dev *azx_dev;
/* PCM */
struct list_head pcm_list; /* azx_pcm list */
/* HD codec */
unsigned short codec_mask;
int codec_probe_mask; /* copied from probe_mask option */
struct hda_bus *bus;
unsigned int beep_mode;
/* CORB/RIRB */
struct azx_rb corb;
struct azx_rb rirb;
/* CORB/RIRB and position buffers */
struct snd_dma_buffer rb;
struct snd_dma_buffer posbuf;
#ifdef CONFIG_SND_HDA_PATCH_LOADER
const struct firmware *fw;
#endif
/* flags */
int position_fix[2]; /* for both playback/capture streams */
int poll_count;
unsigned int running :1;
unsigned int initialized :1;
unsigned int single_cmd :1;
unsigned int polling_mode :1;
unsigned int msi :1;
unsigned int irq_pending_warned :1;
unsigned int probing :1; /* codec probing phase */
unsigned int snoop:1;
unsigned int align_buffer_size:1;
unsigned int region_requested:1;
/* VGA-switcheroo setup */
unsigned int use_vga_switcheroo:1;
unsigned int vga_switcheroo_registered:1;
unsigned int init_failed:1; /* delayed init failed */
unsigned int disabled:1; /* disabled by VGA-switcher */
/* for debugging */
unsigned int last_cmd[AZX_MAX_CODECS];
/* for pending irqs */
struct work_struct irq_pending_work;
/* reboot notifier (for mysterious hangup problem at power-down) */
struct notifier_block reboot_notifier;
/* card list (for power_save trigger) */
struct list_head list;
};
#define CREATE_TRACE_POINTS
#include "hda_intel_trace.h"
/* driver types */
enum {
AZX_DRIVER_ICH,
AZX_DRIVER_PCH,
AZX_DRIVER_SCH,
AZX_DRIVER_ATI,
AZX_DRIVER_ATIHDMI,
AZX_DRIVER_ATIHDMI_NS,
AZX_DRIVER_VIA,
AZX_DRIVER_SIS,
AZX_DRIVER_ULI,
AZX_DRIVER_NVIDIA,
AZX_DRIVER_TERA,
AZX_DRIVER_CTX,
AZX_DRIVER_CTHDA,
AZX_DRIVER_GENERIC,
AZX_NUM_DRIVERS, /* keep this as last entry */
};
/* driver quirks (capabilities) */
/* bits 0-7 are used for indicating driver type */
#define AZX_DCAPS_NO_TCSEL (1 << 8) /* No Intel TCSEL bit */
#define AZX_DCAPS_NO_MSI (1 << 9) /* No MSI support */
#define AZX_DCAPS_ATI_SNOOP (1 << 10) /* ATI snoop enable */
#define AZX_DCAPS_NVIDIA_SNOOP (1 << 11) /* Nvidia snoop enable */
#define AZX_DCAPS_SCH_SNOOP (1 << 12) /* SCH/PCH snoop enable */
#define AZX_DCAPS_RIRB_DELAY (1 << 13) /* Long delay in read loop */
#define AZX_DCAPS_RIRB_PRE_DELAY (1 << 14) /* Put a delay before read */
#define AZX_DCAPS_CTX_WORKAROUND (1 << 15) /* X-Fi workaround */
#define AZX_DCAPS_POSFIX_LPIB (1 << 16) /* Use LPIB as default */
#define AZX_DCAPS_POSFIX_VIA (1 << 17) /* Use VIACOMBO as default */
#define AZX_DCAPS_NO_64BIT (1 << 18) /* No 64bit address */
#define AZX_DCAPS_SYNC_WRITE (1 << 19) /* sync each cmd write */
#define AZX_DCAPS_OLD_SSYNC (1 << 20) /* Old SSYNC reg for ICH */
#define AZX_DCAPS_BUFSIZE (1 << 21) /* no buffer size alignment */
#define AZX_DCAPS_ALIGN_BUFSIZE (1 << 22) /* buffer size alignment */
#define AZX_DCAPS_4K_BDLE_BOUNDARY (1 << 23) /* BDLE in 4k boundary */
#define AZX_DCAPS_COUNT_LPIB_DELAY (1 << 25) /* Take LPIB as delay */
#define AZX_DCAPS_PM_RUNTIME (1 << 26) /* runtime PM support */
/* quirks for Intel PCH */
#define AZX_DCAPS_INTEL_PCH_NOPM \
(AZX_DCAPS_SCH_SNOOP | AZX_DCAPS_BUFSIZE | \
AZX_DCAPS_COUNT_LPIB_DELAY)
#define AZX_DCAPS_INTEL_PCH \
(AZX_DCAPS_INTEL_PCH_NOPM | AZX_DCAPS_PM_RUNTIME)
/* quirks for ATI SB / AMD Hudson */
#define AZX_DCAPS_PRESET_ATI_SB \
(AZX_DCAPS_ATI_SNOOP | AZX_DCAPS_NO_TCSEL | \
AZX_DCAPS_SYNC_WRITE | AZX_DCAPS_POSFIX_LPIB)
/* quirks for ATI/AMD HDMI */
#define AZX_DCAPS_PRESET_ATI_HDMI \
(AZX_DCAPS_NO_TCSEL | AZX_DCAPS_SYNC_WRITE | AZX_DCAPS_POSFIX_LPIB)
/* quirks for Nvidia */
#define AZX_DCAPS_PRESET_NVIDIA \
(AZX_DCAPS_NVIDIA_SNOOP | AZX_DCAPS_RIRB_DELAY | AZX_DCAPS_NO_MSI |\
AZX_DCAPS_ALIGN_BUFSIZE)
#define AZX_DCAPS_PRESET_CTHDA \
(AZX_DCAPS_NO_MSI | AZX_DCAPS_POSFIX_LPIB | AZX_DCAPS_4K_BDLE_BOUNDARY)
/*
* VGA-switcher support
*/
#ifdef SUPPORT_VGA_SWITCHEROO
#define use_vga_switcheroo(chip) ((chip)->use_vga_switcheroo)
#else
#define use_vga_switcheroo(chip) 0
#endif
static char *driver_short_names[] = {
[AZX_DRIVER_ICH] = "HDA Intel",
[AZX_DRIVER_PCH] = "HDA Intel PCH",
[AZX_DRIVER_SCH] = "HDA Intel MID",
[AZX_DRIVER_ATI] = "HDA ATI SB",
[AZX_DRIVER_ATIHDMI] = "HDA ATI HDMI",
[AZX_DRIVER_ATIHDMI_NS] = "HDA ATI HDMI",
[AZX_DRIVER_VIA] = "HDA VIA VT82xx",
[AZX_DRIVER_SIS] = "HDA SIS966",
[AZX_DRIVER_ULI] = "HDA ULI M5461",
[AZX_DRIVER_NVIDIA] = "HDA NVidia",
[AZX_DRIVER_TERA] = "HDA Teradici",
[AZX_DRIVER_CTX] = "HDA Creative",
[AZX_DRIVER_CTHDA] = "HDA Creative",
[AZX_DRIVER_GENERIC] = "HD-Audio Generic",
};
/*
* macros for easy use
*/
#define azx_writel(chip,reg,value) \
writel(value, (chip)->remap_addr + ICH6_REG_##reg)
#define azx_readl(chip,reg) \
readl((chip)->remap_addr + ICH6_REG_##reg)
#define azx_writew(chip,reg,value) \
writew(value, (chip)->remap_addr + ICH6_REG_##reg)
#define azx_readw(chip,reg) \
readw((chip)->remap_addr + ICH6_REG_##reg)
#define azx_writeb(chip,reg,value) \
writeb(value, (chip)->remap_addr + ICH6_REG_##reg)
#define azx_readb(chip,reg) \
readb((chip)->remap_addr + ICH6_REG_##reg)
#define azx_sd_writel(dev,reg,value) \
writel(value, (dev)->sd_addr + ICH6_REG_##reg)
#define azx_sd_readl(dev,reg) \
readl((dev)->sd_addr + ICH6_REG_##reg)
#define azx_sd_writew(dev,reg,value) \
writew(value, (dev)->sd_addr + ICH6_REG_##reg)
#define azx_sd_readw(dev,reg) \
readw((dev)->sd_addr + ICH6_REG_##reg)
#define azx_sd_writeb(dev,reg,value) \
writeb(value, (dev)->sd_addr + ICH6_REG_##reg)
#define azx_sd_readb(dev,reg) \
readb((dev)->sd_addr + ICH6_REG_##reg)
/* for pcm support */
#define get_azx_dev(substream) (substream->runtime->private_data)
#ifdef CONFIG_X86
static void __mark_pages_wc(struct azx *chip, struct snd_dma_buffer *dmab, bool on)
{
int pages;
if (azx_snoop(chip))
return;
if (!dmab || !dmab->area || !dmab->bytes)
return;
#ifdef CONFIG_SND_DMA_SGBUF
if (dmab->dev.type == SNDRV_DMA_TYPE_DEV_SG) {
struct snd_sg_buf *sgbuf = dmab->private_data;
if (on)
set_pages_array_wc(sgbuf->page_table, sgbuf->pages);
else
set_pages_array_wb(sgbuf->page_table, sgbuf->pages);
return;
}
#endif
pages = (dmab->bytes + PAGE_SIZE - 1) >> PAGE_SHIFT;
if (on)
set_memory_wc((unsigned long)dmab->area, pages);
else
set_memory_wb((unsigned long)dmab->area, pages);
}
static inline void mark_pages_wc(struct azx *chip, struct snd_dma_buffer *buf,
bool on)
{
__mark_pages_wc(chip, buf, on);
}
static inline void mark_runtime_wc(struct azx *chip, struct azx_dev *azx_dev,
struct snd_pcm_substream *substream, bool on)
{
if (azx_dev->wc_marked != on) {
__mark_pages_wc(chip, snd_pcm_get_dma_buf(substream), on);
azx_dev->wc_marked = on;
}
}
#else
/* NOP for other archs */
static inline void mark_pages_wc(struct azx *chip, struct snd_dma_buffer *buf,
bool on)
{
}
static inline void mark_runtime_wc(struct azx *chip, struct azx_dev *azx_dev,
struct snd_pcm_substream *substream, bool on)
{
}
#endif
static int azx_acquire_irq(struct azx *chip, int do_disconnect);
static int azx_send_cmd(struct hda_bus *bus, unsigned int val);
/*
* Interface for HD codec
*/
/*
* CORB / RIRB interface
*/
static int azx_alloc_cmd_io(struct azx *chip)
{
int err;
/* single page (at least 4096 bytes) must suffice for both ringbuffes */
err = snd_dma_alloc_pages(SNDRV_DMA_TYPE_DEV,
snd_dma_pci_data(chip->pci),
PAGE_SIZE, &chip->rb);
if (err < 0) {
snd_printk(KERN_ERR SFX "%s: cannot allocate CORB/RIRB\n", pci_name(chip->pci));
return err;
}
mark_pages_wc(chip, &chip->rb, true);
return 0;
}
static void azx_init_cmd_io(struct azx *chip)
{
spin_lock_irq(&chip->reg_lock);
/* CORB set up */
chip->corb.addr = chip->rb.addr;
chip->corb.buf = (u32 *)chip->rb.area;
azx_writel(chip, CORBLBASE, (u32)chip->corb.addr);
azx_writel(chip, CORBUBASE, upper_32_bits(chip->corb.addr));
/* set the corb size to 256 entries (ULI requires explicitly) */
azx_writeb(chip, CORBSIZE, 0x02);
/* set the corb write pointer to 0 */
azx_writew(chip, CORBWP, 0);
/* reset the corb hw read pointer */
azx_writew(chip, CORBRP, ICH6_CORBRP_RST);
/* enable corb dma */
azx_writeb(chip, CORBCTL, ICH6_CORBCTL_RUN);
/* RIRB set up */
chip->rirb.addr = chip->rb.addr + 2048;
chip->rirb.buf = (u32 *)(chip->rb.area + 2048);
chip->rirb.wp = chip->rirb.rp = 0;
memset(chip->rirb.cmds, 0, sizeof(chip->rirb.cmds));
azx_writel(chip, RIRBLBASE, (u32)chip->rirb.addr);
azx_writel(chip, RIRBUBASE, upper_32_bits(chip->rirb.addr));
/* set the rirb size to 256 entries (ULI requires explicitly) */
azx_writeb(chip, RIRBSIZE, 0x02);
/* reset the rirb hw write pointer */
azx_writew(chip, RIRBWP, ICH6_RIRBWP_RST);
/* set N=1, get RIRB response interrupt for new entry */
if (chip->driver_caps & AZX_DCAPS_CTX_WORKAROUND)
azx_writew(chip, RINTCNT, 0xc0);
else
azx_writew(chip, RINTCNT, 1);
/* enable rirb dma and response irq */
azx_writeb(chip, RIRBCTL, ICH6_RBCTL_DMA_EN | ICH6_RBCTL_IRQ_EN);
spin_unlock_irq(&chip->reg_lock);
}
static void azx_free_cmd_io(struct azx *chip)
{
spin_lock_irq(&chip->reg_lock);
/* disable ringbuffer DMAs */
azx_writeb(chip, RIRBCTL, 0);
azx_writeb(chip, CORBCTL, 0);
spin_unlock_irq(&chip->reg_lock);
}
static unsigned int azx_command_addr(u32 cmd)
{
unsigned int addr = cmd >> 28;
if (addr >= AZX_MAX_CODECS) {
snd_BUG();
addr = 0;
}
return addr;
}
static unsigned int azx_response_addr(u32 res)
{
unsigned int addr = res & 0xf;
if (addr >= AZX_MAX_CODECS) {
snd_BUG();
addr = 0;
}
return addr;
}
/* send a command */
static int azx_corb_send_cmd(struct hda_bus *bus, u32 val)
{
struct azx *chip = bus->private_data;
unsigned int addr = azx_command_addr(val);
unsigned int wp, rp;
spin_lock_irq(&chip->reg_lock);
/* add command to corb */
wp = azx_readw(chip, CORBWP);
if (wp == 0xffff) {
/* something wrong, controller likely turned to D3 */
spin_unlock_irq(&chip->reg_lock);
return -EIO;
}
wp++;
wp %= ICH6_MAX_CORB_ENTRIES;
rp = azx_readw(chip, CORBRP);
if (wp == rp) {
/* oops, it's full */
spin_unlock_irq(&chip->reg_lock);
return -EAGAIN;
}
chip->rirb.cmds[addr]++;
chip->corb.buf[wp] = cpu_to_le32(val);
azx_writel(chip, CORBWP, wp);
spin_unlock_irq(&chip->reg_lock);
return 0;
}
#define ICH6_RIRB_EX_UNSOL_EV (1<<4)
/* retrieve RIRB entry - called from interrupt handler */
static void azx_update_rirb(struct azx *chip)
{
unsigned int rp, wp;
unsigned int addr;
u32 res, res_ex;
wp = azx_readw(chip, RIRBWP);
if (wp == 0xffff) {
/* something wrong, controller likely turned to D3 */
return;
}
if (wp == chip->rirb.wp)
return;
chip->rirb.wp = wp;
while (chip->rirb.rp != wp) {
chip->rirb.rp++;
chip->rirb.rp %= ICH6_MAX_RIRB_ENTRIES;
rp = chip->rirb.rp << 1; /* an RIRB entry is 8-bytes */
res_ex = le32_to_cpu(chip->rirb.buf[rp + 1]);
res = le32_to_cpu(chip->rirb.buf[rp]);
addr = azx_response_addr(res_ex);
if (res_ex & ICH6_RIRB_EX_UNSOL_EV)
snd_hda_queue_unsol_event(chip->bus, res, res_ex);
else if (chip->rirb.cmds[addr]) {
chip->rirb.res[addr] = res;
smp_wmb();
chip->rirb.cmds[addr]--;
} else
snd_printk(KERN_ERR SFX "%s: spurious response %#x:%#x, "
"last cmd=%#08x\n",
pci_name(chip->pci),
res, res_ex,
chip->last_cmd[addr]);
}
}
/* receive a response */
static unsigned int azx_rirb_get_response(struct hda_bus *bus,
unsigned int addr)
{
struct azx *chip = bus->private_data;
unsigned long timeout;
unsigned long loopcounter;
int do_poll = 0;
again:
timeout = jiffies + msecs_to_jiffies(1000);
for (loopcounter = 0;; loopcounter++) {
if (chip->polling_mode || do_poll) {
spin_lock_irq(&chip->reg_lock);
azx_update_rirb(chip);
spin_unlock_irq(&chip->reg_lock);
}
if (!chip->rirb.cmds[addr]) {
smp_rmb();
bus->rirb_error = 0;
if (!do_poll)
chip->poll_count = 0;
return chip->rirb.res[addr]; /* the last value */
}
if (time_after(jiffies, timeout))
break;
if (bus->needs_damn_long_delay || loopcounter > 3000)
msleep(2); /* temporary workaround */
else {
udelay(10);
cond_resched();
}
}
if (!chip->polling_mode && chip->poll_count < 2) {
snd_printdd(SFX "%s: azx_get_response timeout, "
"polling the codec once: last cmd=0x%08x\n",
pci_name(chip->pci), chip->last_cmd[addr]);
do_poll = 1;
chip->poll_count++;
goto again;
}
if (!chip->polling_mode) {
snd_printk(KERN_WARNING SFX "%s: azx_get_response timeout, "
"switching to polling mode: last cmd=0x%08x\n",
pci_name(chip->pci), chip->last_cmd[addr]);
chip->polling_mode = 1;
goto again;
}
if (chip->msi) {
snd_printk(KERN_WARNING SFX "%s: No response from codec, "
"disabling MSI: last cmd=0x%08x\n",
pci_name(chip->pci), chip->last_cmd[addr]);
free_irq(chip->irq, chip);
chip->irq = -1;
pci_disable_msi(chip->pci);
chip->msi = 0;
if (azx_acquire_irq(chip, 1) < 0) {
bus->rirb_error = 1;
return -1;
}
goto again;
}
if (chip->probing) {
/* If this critical timeout happens during the codec probing
* phase, this is likely an access to a non-existing codec
* slot. Better to return an error and reset the system.
*/
return -1;
}
/* a fatal communication error; need either to reset or to fallback
* to the single_cmd mode
*/
bus->rirb_error = 1;
if (bus->allow_bus_reset && !bus->response_reset && !bus->in_reset) {
bus->response_reset = 1;
return -1; /* give a chance to retry */
}
snd_printk(KERN_ERR "hda_intel: azx_get_response timeout, "
"switching to single_cmd mode: last cmd=0x%08x\n",
chip->last_cmd[addr]);
chip->single_cmd = 1;
bus->response_reset = 0;
/* release CORB/RIRB */
azx_free_cmd_io(chip);
/* disable unsolicited responses */
azx_writel(chip, GCTL, azx_readl(chip, GCTL) & ~ICH6_GCTL_UNSOL);
return -1;
}
/*
* Use the single immediate command instead of CORB/RIRB for simplicity
*
* Note: according to Intel, this is not preferred use. The command was
* intended for the BIOS only, and may get confused with unsolicited
* responses. So, we shouldn't use it for normal operation from the
* driver.
* I left the codes, however, for debugging/testing purposes.
*/
/* receive a response */
static int azx_single_wait_for_response(struct azx *chip, unsigned int addr)
{
int timeout = 50;
while (timeout--) {
/* check IRV busy bit */
if (azx_readw(chip, IRS) & ICH6_IRS_VALID) {
/* reuse rirb.res as the response return value */
chip->rirb.res[addr] = azx_readl(chip, IR);
return 0;
}
udelay(1);
}
if (printk_ratelimit())
snd_printd(SFX "%s: get_response timeout: IRS=0x%x\n",
pci_name(chip->pci), azx_readw(chip, IRS));
chip->rirb.res[addr] = -1;
return -EIO;
}
/* send a command */
static int azx_single_send_cmd(struct hda_bus *bus, u32 val)
{
struct azx *chip = bus->private_data;
unsigned int addr = azx_command_addr(val);
int timeout = 50;
bus->rirb_error = 0;
while (timeout--) {
/* check ICB busy bit */
if (!((azx_readw(chip, IRS) & ICH6_IRS_BUSY))) {
/* Clear IRV valid bit */
azx_writew(chip, IRS, azx_readw(chip, IRS) |
ICH6_IRS_VALID);
azx_writel(chip, IC, val);
azx_writew(chip, IRS, azx_readw(chip, IRS) |
ICH6_IRS_BUSY);
return azx_single_wait_for_response(chip, addr);
}
udelay(1);
}
if (printk_ratelimit())
snd_printd(SFX "%s: send_cmd timeout: IRS=0x%x, val=0x%x\n",
pci_name(chip->pci), azx_readw(chip, IRS), val);
return -EIO;
}
/* receive a response */
static unsigned int azx_single_get_response(struct hda_bus *bus,
unsigned int addr)
{
struct azx *chip = bus->private_data;
return chip->rirb.res[addr];
}
/*
* The below are the main callbacks from hda_codec.
*
* They are just the skeleton to call sub-callbacks according to the
* current setting of chip->single_cmd.
*/
/* send a command */
static int azx_send_cmd(struct hda_bus *bus, unsigned int val)
{
struct azx *chip = bus->private_data;
if (chip->disabled)
return 0;
chip->last_cmd[azx_command_addr(val)] = val;
if (chip->single_cmd)
return azx_single_send_cmd(bus, val);
else
return azx_corb_send_cmd(bus, val);
}
/* get a response */
static unsigned int azx_get_response(struct hda_bus *bus,
unsigned int addr)
{
struct azx *chip = bus->private_data;
if (chip->disabled)
return 0;
if (chip->single_cmd)
return azx_single_get_response(bus, addr);
else
return azx_rirb_get_response(bus, addr);
}
#ifdef CONFIG_PM
static void azx_power_notify(struct hda_bus *bus, bool power_up);
#endif
#ifdef CONFIG_SND_HDA_DSP_LOADER
static int azx_load_dsp_prepare(struct hda_bus *bus, unsigned int format,
unsigned int byte_size,
struct snd_dma_buffer *bufp);
static void azx_load_dsp_trigger(struct hda_bus *bus, bool start);
static void azx_load_dsp_cleanup(struct hda_bus *bus,
struct snd_dma_buffer *dmab);
#endif
/* reset codec link */
static int azx_reset(struct azx *chip, int full_reset)
{
unsigned long timeout;
if (!full_reset)
goto __skip;
/* clear STATESTS */
azx_writeb(chip, STATESTS, STATESTS_INT_MASK);
/* reset controller */
azx_writel(chip, GCTL, azx_readl(chip, GCTL) & ~ICH6_GCTL_RESET);
timeout = jiffies + msecs_to_jiffies(100);
while (azx_readb(chip, GCTL) &&
time_before(jiffies, timeout))
usleep_range(500, 1000);
/* delay for >= 100us for codec PLL to settle per spec
* Rev 0.9 section 5.5.1
*/
usleep_range(500, 1000);
/* Bring controller out of reset */
azx_writeb(chip, GCTL, azx_readb(chip, GCTL) | ICH6_GCTL_RESET);
timeout = jiffies + msecs_to_jiffies(100);
while (!azx_readb(chip, GCTL) &&
time_before(jiffies, timeout))
usleep_range(500, 1000);
/* Brent Chartrand said to wait >= 540us for codecs to initialize */
usleep_range(1000, 1200);
__skip:
/* check to see if controller is ready */
if (!azx_readb(chip, GCTL)) {
snd_printd(SFX "%s: azx_reset: controller not ready!\n", pci_name(chip->pci));
return -EBUSY;
}
/* Accept unsolicited responses */
if (!chip->single_cmd)
azx_writel(chip, GCTL, azx_readl(chip, GCTL) |
ICH6_GCTL_UNSOL);
/* detect codecs */
if (!chip->codec_mask) {
chip->codec_mask = azx_readw(chip, STATESTS);
snd_printdd(SFX "%s: codec_mask = 0x%x\n", pci_name(chip->pci), chip->codec_mask);
}
return 0;
}
/*
* Lowlevel interface
*/
/* enable interrupts */
static void azx_int_enable(struct azx *chip)
{
/* enable controller CIE and GIE */
azx_writel(chip, INTCTL, azx_readl(chip, INTCTL) |
ICH6_INT_CTRL_EN | ICH6_INT_GLOBAL_EN);
}
/* disable interrupts */
static void azx_int_disable(struct azx *chip)
{
int i;
/* disable interrupts in stream descriptor */
for (i = 0; i < chip->num_streams; i++) {
struct azx_dev *azx_dev = &chip->azx_dev[i];
azx_sd_writeb(azx_dev, SD_CTL,
azx_sd_readb(azx_dev, SD_CTL) & ~SD_INT_MASK);
}
/* disable SIE for all streams */
azx_writeb(chip, INTCTL, 0);
/* disable controller CIE and GIE */
azx_writel(chip, INTCTL, azx_readl(chip, INTCTL) &
~(ICH6_INT_CTRL_EN | ICH6_INT_GLOBAL_EN));
}
/* clear interrupts */
static void azx_int_clear(struct azx *chip)
{
int i;
/* clear stream status */
for (i = 0; i < chip->num_streams; i++) {
struct azx_dev *azx_dev = &chip->azx_dev[i];
azx_sd_writeb(azx_dev, SD_STS, SD_INT_MASK);
}
/* clear STATESTS */
azx_writeb(chip, STATESTS, STATESTS_INT_MASK);
/* clear rirb status */
azx_writeb(chip, RIRBSTS, RIRB_INT_MASK);
/* clear int status */
azx_writel(chip, INTSTS, ICH6_INT_CTRL_EN | ICH6_INT_ALL_STREAM);
}
/* start a stream */
static void azx_stream_start(struct azx *chip, struct azx_dev *azx_dev)
{
/*
* Before stream start, initialize parameter
*/
azx_dev->insufficient = 1;
/* enable SIE */
azx_writel(chip, INTCTL,
azx_readl(chip, INTCTL) | (1 << azx_dev->index));
/* set DMA start and interrupt mask */
azx_sd_writeb(azx_dev, SD_CTL, azx_sd_readb(azx_dev, SD_CTL) |
SD_CTL_DMA_START | SD_INT_MASK);
}
/* stop DMA */
static void azx_stream_clear(struct azx *chip, struct azx_dev *azx_dev)
{
azx_sd_writeb(azx_dev, SD_CTL, azx_sd_readb(azx_dev, SD_CTL) &
~(SD_CTL_DMA_START | SD_INT_MASK));
azx_sd_writeb(azx_dev, SD_STS, SD_INT_MASK); /* to be sure */
}
/* stop a stream */
static void azx_stream_stop(struct azx *chip, struct azx_dev *azx_dev)
{
azx_stream_clear(chip, azx_dev);
/* disable SIE */
azx_writel(chip, INTCTL,
azx_readl(chip, INTCTL) & ~(1 << azx_dev->index));
}
/*
* reset and start the controller registers
*/
static void azx_init_chip(struct azx *chip, int full_reset)
{
if (chip->initialized)
return;
/* reset controller */
azx_reset(chip, full_reset);
/* initialize interrupts */
azx_int_clear(chip);
azx_int_enable(chip);
/* initialize the codec command I/O */
if (!chip->single_cmd)
azx_init_cmd_io(chip);
/* program the position buffer */
azx_writel(chip, DPLBASE, (u32)chip->posbuf.addr);
azx_writel(chip, DPUBASE, upper_32_bits(chip->posbuf.addr));
chip->initialized = 1;
}
/*
* initialize the PCI registers
*/
/* update bits in a PCI register byte */
static void update_pci_byte(struct pci_dev *pci, unsigned int reg,
unsigned char mask, unsigned char val)
{
unsigned char data;
pci_read_config_byte(pci, reg, &data);
data &= ~mask;
data |= (val & mask);
pci_write_config_byte(pci, reg, data);
}
static void azx_init_pci(struct azx *chip)
{
/* Clear bits 0-2 of PCI register TCSEL (at offset 0x44)
* TCSEL == Traffic Class Select Register, which sets PCI express QOS
* Ensuring these bits are 0 clears playback static on some HD Audio
* codecs.
* The PCI register TCSEL is defined in the Intel manuals.
*/
if (!(chip->driver_caps & AZX_DCAPS_NO_TCSEL)) {
snd_printdd(SFX "%s: Clearing TCSEL\n", pci_name(chip->pci));
update_pci_byte(chip->pci, ICH6_PCIREG_TCSEL, 0x07, 0);
}
/* For ATI SB450/600/700/800/900 and AMD Hudson azalia HD audio,
* we need to enable snoop.
*/
if (chip->driver_caps & AZX_DCAPS_ATI_SNOOP) {
snd_printdd(SFX "%s: Setting ATI snoop: %d\n", pci_name(chip->pci), azx_snoop(chip));
update_pci_byte(chip->pci,
ATI_SB450_HDAUDIO_MISC_CNTR2_ADDR, 0x07,
azx_snoop(chip) ? ATI_SB450_HDAUDIO_ENABLE_SNOOP : 0);
}
/* For NVIDIA HDA, enable snoop */
if (chip->driver_caps & AZX_DCAPS_NVIDIA_SNOOP) {
snd_printdd(SFX "%s: Setting Nvidia snoop: %d\n", pci_name(chip->pci), azx_snoop(chip));
update_pci_byte(chip->pci,
NVIDIA_HDA_TRANSREG_ADDR,
0x0f, NVIDIA_HDA_ENABLE_COHBITS);
update_pci_byte(chip->pci,
NVIDIA_HDA_ISTRM_COH,
0x01, NVIDIA_HDA_ENABLE_COHBIT);
update_pci_byte(chip->pci,
NVIDIA_HDA_OSTRM_COH,
0x01, NVIDIA_HDA_ENABLE_COHBIT);
}
/* Enable SCH/PCH snoop if needed */
if (chip->driver_caps & AZX_DCAPS_SCH_SNOOP) {
unsigned short snoop;
pci_read_config_word(chip->pci, INTEL_SCH_HDA_DEVC, &snoop);
if ((!azx_snoop(chip) && !(snoop & INTEL_SCH_HDA_DEVC_NOSNOOP)) ||
(azx_snoop(chip) && (snoop & INTEL_SCH_HDA_DEVC_NOSNOOP))) {
snoop &= ~INTEL_SCH_HDA_DEVC_NOSNOOP;
if (!azx_snoop(chip))
snoop |= INTEL_SCH_HDA_DEVC_NOSNOOP;
pci_write_config_word(chip->pci, INTEL_SCH_HDA_DEVC, snoop);
pci_read_config_word(chip->pci,
INTEL_SCH_HDA_DEVC, &snoop);
}
snd_printdd(SFX "%s: SCH snoop: %s\n",
pci_name(chip->pci), (snoop & INTEL_SCH_HDA_DEVC_NOSNOOP)
? "Disabled" : "Enabled");
}
}
static int azx_position_ok(struct azx *chip, struct azx_dev *azx_dev);
/*
* interrupt handler
*/
IRQ: Maintain regs pointer globally rather than passing to IRQ handlers Maintain a per-CPU global "struct pt_regs *" variable which can be used instead of passing regs around manually through all ~1800 interrupt handlers in the Linux kernel. The regs pointer is used in few places, but it potentially costs both stack space and code to pass it around. On the FRV arch, removing the regs parameter from all the genirq function results in a 20% speed up of the IRQ exit path (ie: from leaving timer_interrupt() to leaving do_IRQ()). Where appropriate, an arch may override the generic storage facility and do something different with the variable. On FRV, for instance, the address is maintained in GR28 at all times inside the kernel as part of general exception handling. Having looked over the code, it appears that the parameter may be handed down through up to twenty or so layers of functions. Consider a USB character device attached to a USB hub, attached to a USB controller that posts its interrupts through a cascaded auxiliary interrupt controller. A character device driver may want to pass regs to the sysrq handler through the input layer which adds another few layers of parameter passing. I've build this code with allyesconfig for x86_64 and i386. I've runtested the main part of the code on FRV and i386, though I can't test most of the drivers. I've also done partial conversion for powerpc and MIPS - these at least compile with minimal configurations. This will affect all archs. Mostly the changes should be relatively easy. Take do_IRQ(), store the regs pointer at the beginning, saving the old one: struct pt_regs *old_regs = set_irq_regs(regs); And put the old one back at the end: set_irq_regs(old_regs); Don't pass regs through to generic_handle_irq() or __do_IRQ(). In timer_interrupt(), this sort of change will be necessary: - update_process_times(user_mode(regs)); - profile_tick(CPU_PROFILING, regs); + update_process_times(user_mode(get_irq_regs())); + profile_tick(CPU_PROFILING); I'd like to move update_process_times()'s use of get_irq_regs() into itself, except that i386, alone of the archs, uses something other than user_mode(). Some notes on the interrupt handling in the drivers: (*) input_dev() is now gone entirely. The regs pointer is no longer stored in the input_dev struct. (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does something different depending on whether it's been supplied with a regs pointer or not. (*) Various IRQ handler function pointers have been moved to type irq_handler_t. Signed-Off-By: David Howells <dhowells@redhat.com> (cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
2006-10-05 13:55:46 +00:00
static irqreturn_t azx_interrupt(int irq, void *dev_id)
{
struct azx *chip = dev_id;
struct azx_dev *azx_dev;
u32 status;
u8 sd_status;
int i, ok;
ALSA: hda - add runtime PM support Runtime PM can bring more power saving: - When the controller is suspended, its parent device will also have a chance to suspend. - PCI subsystem can choose the lowest power state the controller can signal wake up from. This state can be D3cold on platforms with ACPI PM support. And runtime PM can provide a gerneral sysfs interface for a system policy manager. Runtime PM support is based on current HDA power saving implementation. The user can enable runtime PM on platfroms that provide acceptable latency on transition from D3 to D0. Details: - When both power saving and runtime PM are enabled: -- If a codec supports 'stop-clock' in D3, it will request suspending the controller after it enters D3 and request resuming the controller before back to D0. Thus the controller will be suspended only when all codecs are suspended and support stop-clock in D3. -- User IO operations and HW wakeup signal can resume the controller back to D0. - If runtime PM is disabled, power saving just works as before. - If power saving is disabled, the controller won't be suspended because the power usage counter can never be 0. More about 'stop-clock' feature: If a codec can support targeted pass-through operations in D3 state when there is no BCLK present on the link, it will set CLKSTOP flag in the supported power states and report PS-ClkStopOk when entering D3 state. Please refer to HDA spec section 7.3.3.10 Power state and 7.3.4.12 Supported Power State. [Fixed CONFIG_PM_RUNTIME dependency in hda_intel.c by tiwai] Signed-off-by: Mengdong Lin <mengdong.lin@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-08-23 09:32:30 +00:00
#ifdef CONFIG_PM_RUNTIME
if (chip->pci->dev.power.runtime_status != RPM_ACTIVE)
return IRQ_NONE;
#endif
spin_lock(&chip->reg_lock);
if (chip->disabled) {
spin_unlock(&chip->reg_lock);
return IRQ_NONE;
}
status = azx_readl(chip, INTSTS);
if (status == 0) {
spin_unlock(&chip->reg_lock);
return IRQ_NONE;
}
for (i = 0; i < chip->num_streams; i++) {
azx_dev = &chip->azx_dev[i];
if (status & azx_dev->sd_int_sta_mask) {
sd_status = azx_sd_readb(azx_dev, SD_STS);
azx_sd_writeb(azx_dev, SD_STS, SD_INT_MASK);
if (!azx_dev->substream || !azx_dev->running ||
!(sd_status & SD_INT_COMPLETE))
continue;
/* check whether this IRQ is really acceptable */
ok = azx_position_ok(chip, azx_dev);
if (ok == 1) {
azx_dev->irq_pending = 0;
spin_unlock(&chip->reg_lock);
snd_pcm_period_elapsed(azx_dev->substream);
spin_lock(&chip->reg_lock);
} else if (ok == 0 && chip->bus && chip->bus->workq) {
/* bogus IRQ, process it later */
azx_dev->irq_pending = 1;
queue_work(chip->bus->workq,
&chip->irq_pending_work);
}
}
}
/* clear rirb int */
status = azx_readb(chip, RIRBSTS);
if (status & RIRB_INT_MASK) {
if (status & RIRB_INT_RESPONSE) {
if (chip->driver_caps & AZX_DCAPS_RIRB_PRE_DELAY)
udelay(80);
azx_update_rirb(chip);
}
azx_writeb(chip, RIRBSTS, RIRB_INT_MASK);
}
#if 0
/* clear state status int */
if (azx_readb(chip, STATESTS) & 0x04)
azx_writeb(chip, STATESTS, 0x04);
#endif
spin_unlock(&chip->reg_lock);
return IRQ_HANDLED;
}
/*
* set up a BDL entry
*/
static int setup_bdle(struct azx *chip,
struct snd_dma_buffer *dmab,
struct azx_dev *azx_dev, u32 **bdlp,
int ofs, int size, int with_ioc)
{
u32 *bdl = *bdlp;
while (size > 0) {
dma_addr_t addr;
int chunk;
if (azx_dev->frags >= AZX_MAX_BDL_ENTRIES)
return -EINVAL;
addr = snd_sgbuf_get_addr(dmab, ofs);
/* program the address field of the BDL entry */
bdl[0] = cpu_to_le32((u32)addr);
bdl[1] = cpu_to_le32(upper_32_bits(addr));
/* program the size field of the BDL entry */
chunk = snd_sgbuf_get_chunk_size(dmab, ofs, size);
/* one BDLE cannot cross 4K boundary on CTHDA chips */
if (chip->driver_caps & AZX_DCAPS_4K_BDLE_BOUNDARY) {
u32 remain = 0x1000 - (ofs & 0xfff);
if (chunk > remain)
chunk = remain;
}
bdl[2] = cpu_to_le32(chunk);
/* program the IOC to enable interrupt
* only when the whole fragment is processed
*/
size -= chunk;
bdl[3] = (size || !with_ioc) ? 0 : cpu_to_le32(0x01);
bdl += 4;
azx_dev->frags++;
ofs += chunk;
}
*bdlp = bdl;
return ofs;
}
/*
* set up BDL entries
*/
static int azx_setup_periods(struct azx *chip,
struct snd_pcm_substream *substream,
struct azx_dev *azx_dev)
{
u32 *bdl;
int i, ofs, periods, period_bytes;
int pos_adj;
/* reset BDL address */
azx_sd_writel(azx_dev, SD_BDLPL, 0);
azx_sd_writel(azx_dev, SD_BDLPU, 0);
period_bytes = azx_dev->period_bytes;
periods = azx_dev->bufsize / period_bytes;
/* program the initial BDL entries */
bdl = (u32 *)azx_dev->bdl.area;
ofs = 0;
azx_dev->frags = 0;
pos_adj = bdl_pos_adj[chip->dev_index];
if (!azx_dev->no_period_wakeup && pos_adj > 0) {
struct snd_pcm_runtime *runtime = substream->runtime;
int pos_align = pos_adj;
pos_adj = (pos_adj * runtime->rate + 47999) / 48000;
if (!pos_adj)
pos_adj = pos_align;
else
pos_adj = ((pos_adj + pos_align - 1) / pos_align) *
pos_align;
pos_adj = frames_to_bytes(runtime, pos_adj);
if (pos_adj >= period_bytes) {
snd_printk(KERN_WARNING SFX "%s: Too big adjustment %d\n",
pci_name(chip->pci), bdl_pos_adj[chip->dev_index]);
pos_adj = 0;
} else {
ofs = setup_bdle(chip, snd_pcm_get_dma_buf(substream),
azx_dev,
&bdl, ofs, pos_adj, true);
if (ofs < 0)
goto error;
}
} else
pos_adj = 0;
for (i = 0; i < periods; i++) {
if (i == periods - 1 && pos_adj)
ofs = setup_bdle(chip, snd_pcm_get_dma_buf(substream),
azx_dev, &bdl, ofs,
period_bytes - pos_adj, 0);
else
ofs = setup_bdle(chip, snd_pcm_get_dma_buf(substream),
azx_dev, &bdl, ofs,
period_bytes,
!azx_dev->no_period_wakeup);
if (ofs < 0)
goto error;
}
return 0;
error:
snd_printk(KERN_ERR SFX "%s: Too many BDL entries: buffer=%d, period=%d\n",
pci_name(chip->pci), azx_dev->bufsize, period_bytes);
return -EINVAL;
}
/* reset stream */
static void azx_stream_reset(struct azx *chip, struct azx_dev *azx_dev)
{
unsigned char val;
int timeout;
azx_stream_clear(chip, azx_dev);
azx_sd_writeb(azx_dev, SD_CTL, azx_sd_readb(azx_dev, SD_CTL) |
SD_CTL_STREAM_RESET);
udelay(3);
timeout = 300;
while (!((val = azx_sd_readb(azx_dev, SD_CTL)) & SD_CTL_STREAM_RESET) &&
--timeout)
;
val &= ~SD_CTL_STREAM_RESET;
azx_sd_writeb(azx_dev, SD_CTL, val);
udelay(3);
timeout = 300;
/* waiting for hardware to report that the stream is out of reset */
while (((val = azx_sd_readb(azx_dev, SD_CTL)) & SD_CTL_STREAM_RESET) &&
--timeout)
;
/* reset first position - may not be synced with hw at this time */
*azx_dev->posbuf = 0;
}
/*
* set up the SD for streaming
*/
static int azx_setup_controller(struct azx *chip, struct azx_dev *azx_dev)
{
unsigned int val;
/* make sure the run bit is zero for SD */
azx_stream_clear(chip, azx_dev);
/* program the stream_tag */
val = azx_sd_readl(azx_dev, SD_CTL);
val = (val & ~SD_CTL_STREAM_TAG_MASK) |
(azx_dev->stream_tag << SD_CTL_STREAM_TAG_SHIFT);
if (!azx_snoop(chip))
val |= SD_CTL_TRAFFIC_PRIO;
azx_sd_writel(azx_dev, SD_CTL, val);
/* program the length of samples in cyclic buffer */
azx_sd_writel(azx_dev, SD_CBL, azx_dev->bufsize);
/* program the stream format */
/* this value needs to be the same as the one programmed */
azx_sd_writew(azx_dev, SD_FORMAT, azx_dev->format_val);
/* program the stream LVI (last valid index) of the BDL */
azx_sd_writew(azx_dev, SD_LVI, azx_dev->frags - 1);
/* program the BDL address */
/* lower BDL address */
azx_sd_writel(azx_dev, SD_BDLPL, (u32)azx_dev->bdl.addr);
/* upper BDL address */
azx_sd_writel(azx_dev, SD_BDLPU, upper_32_bits(azx_dev->bdl.addr));
/* enable the position buffer */
if (chip->position_fix[0] != POS_FIX_LPIB ||
chip->position_fix[1] != POS_FIX_LPIB) {
if (!(azx_readl(chip, DPLBASE) & ICH6_DPLBASE_ENABLE))
azx_writel(chip, DPLBASE,
(u32)chip->posbuf.addr | ICH6_DPLBASE_ENABLE);
}
/* set the interrupt enable bits in the descriptor control register */
azx_sd_writel(azx_dev, SD_CTL,
azx_sd_readl(azx_dev, SD_CTL) | SD_INT_MASK);
return 0;
}
/*
* Probe the given codec address
*/
static int probe_codec(struct azx *chip, int addr)
{
unsigned int cmd = (addr << 28) | (AC_NODE_ROOT << 20) |
(AC_VERB_PARAMETERS << 8) | AC_PAR_VENDOR_ID;
unsigned int res;
mutex_lock(&chip->bus->cmd_mutex);
chip->probing = 1;
azx_send_cmd(chip->bus, cmd);
res = azx_get_response(chip->bus, addr);
chip->probing = 0;
mutex_unlock(&chip->bus->cmd_mutex);
if (res == -1)
return -EIO;
snd_printdd(SFX "%s: codec #%d probed OK\n", pci_name(chip->pci), addr);
return 0;
}
static int azx_attach_pcm_stream(struct hda_bus *bus, struct hda_codec *codec,
struct hda_pcm *cpcm);
static void azx_stop_chip(struct azx *chip);
static void azx_bus_reset(struct hda_bus *bus)
{
struct azx *chip = bus->private_data;
bus->in_reset = 1;
azx_stop_chip(chip);
azx_init_chip(chip, 1);
#ifdef CONFIG_PM
if (chip->initialized) {
struct azx_pcm *p;
list_for_each_entry(p, &chip->pcm_list, list)
snd_pcm_suspend_all(p->pcm);
snd_hda_suspend(chip->bus);
snd_hda_resume(chip->bus);
}
#endif
bus->in_reset = 0;
}
static int get_jackpoll_interval(struct azx *chip)
{
int i = jackpoll_ms[chip->dev_index];
unsigned int j;
if (i == 0)
return 0;
if (i < 50 || i > 60000)
j = 0;
else
j = msecs_to_jiffies(i);
if (j == 0)
snd_printk(KERN_WARNING SFX
"jackpoll_ms value out of range: %d\n", i);
return j;
}
/*
* Codec initialization
*/
/* number of codec slots for each chipset: 0 = default slots (i.e. 4) */
static unsigned int azx_max_codecs[AZX_NUM_DRIVERS] = {
[AZX_DRIVER_NVIDIA] = 8,
[AZX_DRIVER_TERA] = 1,
};
static int azx_codec_create(struct azx *chip, const char *model)
{
struct hda_bus_template bus_temp;
int c, codecs, err;
int max_slots;
memset(&bus_temp, 0, sizeof(bus_temp));
bus_temp.private_data = chip;
bus_temp.modelname = model;
bus_temp.pci = chip->pci;
bus_temp.ops.command = azx_send_cmd;
bus_temp.ops.get_response = azx_get_response;
bus_temp.ops.attach_pcm = azx_attach_pcm_stream;
bus_temp.ops.bus_reset = azx_bus_reset;
#ifdef CONFIG_PM
bus_temp.power_save = &power_save;
bus_temp.ops.pm_notify = azx_power_notify;
#endif
#ifdef CONFIG_SND_HDA_DSP_LOADER
bus_temp.ops.load_dsp_prepare = azx_load_dsp_prepare;
bus_temp.ops.load_dsp_trigger = azx_load_dsp_trigger;
bus_temp.ops.load_dsp_cleanup = azx_load_dsp_cleanup;
#endif
err = snd_hda_bus_new(chip->card, &bus_temp, &chip->bus);
if (err < 0)
return err;
if (chip->driver_caps & AZX_DCAPS_RIRB_DELAY) {
snd_printd(SFX "%s: Enable delay in RIRB handling\n", pci_name(chip->pci));
chip->bus->needs_damn_long_delay = 1;
}
codecs = 0;
max_slots = azx_max_codecs[chip->driver_type];
if (!max_slots)
max_slots = AZX_DEFAULT_CODECS;
/* First try to probe all given codec slots */
for (c = 0; c < max_slots; c++) {
if ((chip->codec_mask & (1 << c)) & chip->codec_probe_mask) {
if (probe_codec(chip, c) < 0) {
/* Some BIOSen give you wrong codec addresses
* that don't exist
*/
snd_printk(KERN_WARNING SFX
"%s: Codec #%d probe error; "
"disabling it...\n", pci_name(chip->pci), c);
chip->codec_mask &= ~(1 << c);
/* More badly, accessing to a non-existing
* codec often screws up the controller chip,
* and disturbs the further communications.
* Thus if an error occurs during probing,
* better to reset the controller chip to
* get back to the sanity state.
*/
azx_stop_chip(chip);
azx_init_chip(chip, 1);
}
}
}
/* AMD chipsets often cause the communication stalls upon certain
* sequence like the pin-detection. It seems that forcing the synced
* access works around the stall. Grrr...
*/
if (chip->driver_caps & AZX_DCAPS_SYNC_WRITE) {
snd_printd(SFX "%s: Enable sync_write for stable communication\n",
pci_name(chip->pci));
chip->bus->sync_write = 1;
chip->bus->allow_bus_reset = 1;
}
/* Then create codec instances */
for (c = 0; c < max_slots; c++) {
if ((chip->codec_mask & (1 << c)) & chip->codec_probe_mask) {
struct hda_codec *codec;
err = snd_hda_codec_new(chip->bus, c, &codec);
if (err < 0)
continue;
codec->jackpoll_interval = get_jackpoll_interval(chip);
codec->beep_mode = chip->beep_mode;
codecs++;
}
}
if (!codecs) {
snd_printk(KERN_ERR SFX "%s: no codecs initialized\n", pci_name(chip->pci));
return -ENXIO;
}
return 0;
}
/* configure each codec instance */
static int azx_codec_configure(struct azx *chip)
{
struct hda_codec *codec;
list_for_each_entry(codec, &chip->bus->codec_list, list) {
snd_hda_codec_configure(codec);
}
return 0;
}
/*
* PCM support
*/
/* assign a stream for the PCM */
static inline struct azx_dev *
azx_assign_device(struct azx *chip, struct snd_pcm_substream *substream)
{
int dev, i, nums;
struct azx_dev *res = NULL;
/* make a non-zero unique key for the substream */
int key = (substream->pcm->device << 16) | (substream->number << 2) |
(substream->stream + 1);
if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
dev = chip->playback_index_offset;
nums = chip->playback_streams;
} else {
dev = chip->capture_index_offset;
nums = chip->capture_streams;
}
for (i = 0; i < nums; i++, dev++)
if (!chip->azx_dev[dev].opened) {
res = &chip->azx_dev[dev];
if (res->assigned_key == key)
break;
}
if (res) {
res->opened = 1;
res->assigned_key = key;
}
return res;
}
/* release the assigned stream */
static inline void azx_release_device(struct azx_dev *azx_dev)
{
azx_dev->opened = 0;
}
static cycle_t azx_cc_read(const struct cyclecounter *cc)
{
struct azx_dev *azx_dev = container_of(cc, struct azx_dev, azx_cc);
struct snd_pcm_substream *substream = azx_dev->substream;
struct azx_pcm *apcm = snd_pcm_substream_chip(substream);
struct azx *chip = apcm->chip;
return azx_readl(chip, WALLCLK);
}
static void azx_timecounter_init(struct snd_pcm_substream *substream,
bool force, cycle_t last)
{
struct azx_dev *azx_dev = get_azx_dev(substream);
struct timecounter *tc = &azx_dev->azx_tc;
struct cyclecounter *cc = &azx_dev->azx_cc;
u64 nsec;
cc->read = azx_cc_read;
cc->mask = CLOCKSOURCE_MASK(32);
/*
* Converting from 24 MHz to ns means applying a 125/3 factor.
* To avoid any saturation issues in intermediate operations,
* the 125 factor is applied first. The division is applied
* last after reading the timecounter value.
* Applying the 1/3 factor as part of the multiplication
* requires at least 20 bits for a decent precision, however
* overflows occur after about 4 hours or less, not a option.
*/
cc->mult = 125; /* saturation after 195 years */
cc->shift = 0;
nsec = 0; /* audio time is elapsed time since trigger */
timecounter_init(tc, cc, nsec);
if (force)
/*
* force timecounter to use predefined value,
* used for synchronized starts
*/
tc->cycle_last = last;
}
static int azx_get_wallclock_tstamp(struct snd_pcm_substream *substream,
struct timespec *ts)
{
struct azx_dev *azx_dev = get_azx_dev(substream);
u64 nsec;
nsec = timecounter_read(&azx_dev->azx_tc);
nsec = div_u64(nsec, 3); /* can be optimized */
*ts = ns_to_timespec(nsec);
return 0;
}
static struct snd_pcm_hardware azx_pcm_hw = {
.info = (SNDRV_PCM_INFO_MMAP |
SNDRV_PCM_INFO_INTERLEAVED |
SNDRV_PCM_INFO_BLOCK_TRANSFER |
SNDRV_PCM_INFO_MMAP_VALID |
/* No full-resume yet implemented */
/* SNDRV_PCM_INFO_RESUME |*/
SNDRV_PCM_INFO_PAUSE |
SNDRV_PCM_INFO_SYNC_START |
SNDRV_PCM_INFO_HAS_WALL_CLOCK |
SNDRV_PCM_INFO_NO_PERIOD_WAKEUP),
.formats = SNDRV_PCM_FMTBIT_S16_LE,
.rates = SNDRV_PCM_RATE_48000,
.rate_min = 48000,
.rate_max = 48000,
.channels_min = 2,
.channels_max = 2,
.buffer_bytes_max = AZX_MAX_BUF_SIZE,
.period_bytes_min = 128,
.period_bytes_max = AZX_MAX_BUF_SIZE / 2,
.periods_min = 2,
.periods_max = AZX_MAX_FRAG,
.fifo_size = 0,
};
static int azx_pcm_open(struct snd_pcm_substream *substream)
{
struct azx_pcm *apcm = snd_pcm_substream_chip(substream);
struct hda_pcm_stream *hinfo = apcm->hinfo[substream->stream];
struct azx *chip = apcm->chip;
struct azx_dev *azx_dev;
struct snd_pcm_runtime *runtime = substream->runtime;
unsigned long flags;
int err;
int buff_step;
mutex_lock(&chip->open_mutex);
azx_dev = azx_assign_device(chip, substream);
if (azx_dev == NULL) {
mutex_unlock(&chip->open_mutex);
return -EBUSY;
}
runtime->hw = azx_pcm_hw;
runtime->hw.channels_min = hinfo->channels_min;
runtime->hw.channels_max = hinfo->channels_max;
runtime->hw.formats = hinfo->formats;
runtime->hw.rates = hinfo->rates;
snd_pcm_limit_hw_rates(runtime);
snd_pcm_hw_constraint_integer(runtime, SNDRV_PCM_HW_PARAM_PERIODS);
/* avoid wrap-around with wall-clock */
snd_pcm_hw_constraint_minmax(runtime, SNDRV_PCM_HW_PARAM_BUFFER_TIME,
20,
178000000);
if (chip->align_buffer_size)
/* constrain buffer sizes to be multiple of 128
bytes. This is more efficient in terms of memory
access but isn't required by the HDA spec and
prevents users from specifying exact period/buffer
sizes. For example for 44.1kHz, a period size set
to 20ms will be rounded to 19.59ms. */
buff_step = 128;
else
/* Don't enforce steps on buffer sizes, still need to
be multiple of 4 bytes (HDA spec). Tested on Intel
HDA controllers, may not work on all devices where
option needs to be disabled */
buff_step = 4;
snd_pcm_hw_constraint_step(runtime, 0, SNDRV_PCM_HW_PARAM_BUFFER_BYTES,
buff_step);
snd_pcm_hw_constraint_step(runtime, 0, SNDRV_PCM_HW_PARAM_PERIOD_BYTES,
buff_step);
snd_hda_power_up_d3wait(apcm->codec);
err = hinfo->ops.open(hinfo, apcm->codec, substream);
if (err < 0) {
azx_release_device(azx_dev);
snd_hda_power_down(apcm->codec);
mutex_unlock(&chip->open_mutex);
return err;
}
snd_pcm_limit_hw_rates(runtime);
/* sanity check */
if (snd_BUG_ON(!runtime->hw.channels_min) ||
snd_BUG_ON(!runtime->hw.channels_max) ||
snd_BUG_ON(!runtime->hw.formats) ||
snd_BUG_ON(!runtime->hw.rates)) {
azx_release_device(azx_dev);
hinfo->ops.close(hinfo, apcm->codec, substream);
snd_hda_power_down(apcm->codec);
mutex_unlock(&chip->open_mutex);
return -EINVAL;
}
/* disable WALLCLOCK timestamps for capture streams
until we figure out how to handle digital inputs */
if (substream->stream == SNDRV_PCM_STREAM_CAPTURE)
runtime->hw.info &= ~SNDRV_PCM_INFO_HAS_WALL_CLOCK;
spin_lock_irqsave(&chip->reg_lock, flags);
azx_dev->substream = substream;
azx_dev->running = 0;
spin_unlock_irqrestore(&chip->reg_lock, flags);
runtime->private_data = azx_dev;
snd_pcm_set_sync(substream);
mutex_unlock(&chip->open_mutex);
return 0;
}
static int azx_pcm_close(struct snd_pcm_substream *substream)
{
struct azx_pcm *apcm = snd_pcm_substream_chip(substream);
struct hda_pcm_stream *hinfo = apcm->hinfo[substream->stream];
struct azx *chip = apcm->chip;
struct azx_dev *azx_dev = get_azx_dev(substream);
unsigned long flags;
mutex_lock(&chip->open_mutex);
spin_lock_irqsave(&chip->reg_lock, flags);
azx_dev->substream = NULL;
azx_dev->running = 0;
spin_unlock_irqrestore(&chip->reg_lock, flags);
azx_release_device(azx_dev);
hinfo->ops.close(hinfo, apcm->codec, substream);
snd_hda_power_down(apcm->codec);
mutex_unlock(&chip->open_mutex);
return 0;
}
static int azx_pcm_hw_params(struct snd_pcm_substream *substream,
struct snd_pcm_hw_params *hw_params)
{
struct azx_pcm *apcm = snd_pcm_substream_chip(substream);
struct azx *chip = apcm->chip;
struct azx_dev *azx_dev = get_azx_dev(substream);
int ret;
mark_runtime_wc(chip, azx_dev, substream, false);
azx_dev->bufsize = 0;
azx_dev->period_bytes = 0;
azx_dev->format_val = 0;
ret = snd_pcm_lib_malloc_pages(substream,
params_buffer_bytes(hw_params));
if (ret < 0)
return ret;
mark_runtime_wc(chip, azx_dev, substream, true);
return ret;
}
static int azx_pcm_hw_free(struct snd_pcm_substream *substream)
{
struct azx_pcm *apcm = snd_pcm_substream_chip(substream);
struct azx_dev *azx_dev = get_azx_dev(substream);
struct azx *chip = apcm->chip;
struct hda_pcm_stream *hinfo = apcm->hinfo[substream->stream];
/* reset BDL address */
azx_sd_writel(azx_dev, SD_BDLPL, 0);
azx_sd_writel(azx_dev, SD_BDLPU, 0);
azx_sd_writel(azx_dev, SD_CTL, 0);
azx_dev->bufsize = 0;
azx_dev->period_bytes = 0;
azx_dev->format_val = 0;
snd_hda_codec_cleanup(apcm->codec, hinfo, substream);
mark_runtime_wc(chip, azx_dev, substream, false);
return snd_pcm_lib_free_pages(substream);
}
static int azx_pcm_prepare(struct snd_pcm_substream *substream)
{
struct azx_pcm *apcm = snd_pcm_substream_chip(substream);
struct azx *chip = apcm->chip;
struct azx_dev *azx_dev = get_azx_dev(substream);
struct hda_pcm_stream *hinfo = apcm->hinfo[substream->stream];
struct snd_pcm_runtime *runtime = substream->runtime;
unsigned int bufsize, period_bytes, format_val, stream_tag;
int err;
struct hda_spdif_out *spdif =
snd_hda_spdif_out_of_nid(apcm->codec, hinfo->nid);
unsigned short ctls = spdif ? spdif->ctls : 0;
azx_stream_reset(chip, azx_dev);
format_val = snd_hda_calc_stream_format(runtime->rate,
runtime->channels,
runtime->format,
hinfo->maxbps,
ctls);
if (!format_val) {
snd_printk(KERN_ERR SFX
"%s: invalid format_val, rate=%d, ch=%d, format=%d\n",
pci_name(chip->pci), runtime->rate, runtime->channels, runtime->format);
return -EINVAL;
}
bufsize = snd_pcm_lib_buffer_bytes(substream);
period_bytes = snd_pcm_lib_period_bytes(substream);
snd_printdd(SFX "%s: azx_pcm_prepare: bufsize=0x%x, format=0x%x\n",
pci_name(chip->pci), bufsize, format_val);
if (bufsize != azx_dev->bufsize ||
period_bytes != azx_dev->period_bytes ||
format_val != azx_dev->format_val ||
runtime->no_period_wakeup != azx_dev->no_period_wakeup) {
azx_dev->bufsize = bufsize;
azx_dev->period_bytes = period_bytes;
azx_dev->format_val = format_val;
azx_dev->no_period_wakeup = runtime->no_period_wakeup;
err = azx_setup_periods(chip, substream, azx_dev);
if (err < 0)
return err;
}
/* wallclk has 24Mhz clock source */
azx_dev->period_wallclk = (((runtime->period_size * 24000) /
runtime->rate) * 1000);
azx_setup_controller(chip, azx_dev);
if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
azx_dev->fifo_size = azx_sd_readw(azx_dev, SD_FIFOSIZE) + 1;
else
azx_dev->fifo_size = 0;
stream_tag = azx_dev->stream_tag;
/* CA-IBG chips need the playback stream starting from 1 */
if ((chip->driver_caps & AZX_DCAPS_CTX_WORKAROUND) &&
stream_tag > chip->capture_streams)
stream_tag -= chip->capture_streams;
return snd_hda_codec_prepare(apcm->codec, hinfo, stream_tag,
azx_dev->format_val, substream);
}
static int azx_pcm_trigger(struct snd_pcm_substream *substream, int cmd)
{
struct azx_pcm *apcm = snd_pcm_substream_chip(substream);
struct azx *chip = apcm->chip;
struct azx_dev *azx_dev;
struct snd_pcm_substream *s;
int rstart = 0, start, nsync = 0, sbits = 0;
int nwait, timeout;
azx_dev = get_azx_dev(substream);
trace_azx_pcm_trigger(chip, azx_dev, cmd);
switch (cmd) {
case SNDRV_PCM_TRIGGER_START:
rstart = 1;
case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
case SNDRV_PCM_TRIGGER_RESUME:
start = 1;
break;
case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
case SNDRV_PCM_TRIGGER_SUSPEND:
case SNDRV_PCM_TRIGGER_STOP:
start = 0;
break;
default:
return -EINVAL;
}
snd_pcm_group_for_each_entry(s, substream) {
if (s->pcm->card != substream->pcm->card)
continue;
azx_dev = get_azx_dev(s);
sbits |= 1 << azx_dev->index;
nsync++;
snd_pcm_trigger_done(s, substream);
}
spin_lock(&chip->reg_lock);
/* first, set SYNC bits of corresponding streams */
if (chip->driver_caps & AZX_DCAPS_OLD_SSYNC)
azx_writel(chip, OLD_SSYNC,
azx_readl(chip, OLD_SSYNC) | sbits);
else
azx_writel(chip, SSYNC, azx_readl(chip, SSYNC) | sbits);
snd_pcm_group_for_each_entry(s, substream) {
if (s->pcm->card != substream->pcm->card)
continue;
azx_dev = get_azx_dev(s);
if (start) {
azx_dev->start_wallclk = azx_readl(chip, WALLCLK);
if (!rstart)
azx_dev->start_wallclk -=
azx_dev->period_wallclk;
azx_stream_start(chip, azx_dev);
} else {
azx_stream_stop(chip, azx_dev);
}
azx_dev->running = start;
}
spin_unlock(&chip->reg_lock);
if (start) {
/* wait until all FIFOs get ready */
for (timeout = 5000; timeout; timeout--) {
nwait = 0;
snd_pcm_group_for_each_entry(s, substream) {
if (s->pcm->card != substream->pcm->card)
continue;
azx_dev = get_azx_dev(s);
if (!(azx_sd_readb(azx_dev, SD_STS) &
SD_STS_FIFO_READY))
nwait++;
}
if (!nwait)
break;
cpu_relax();
}
} else {
/* wait until all RUN bits are cleared */
for (timeout = 5000; timeout; timeout--) {
nwait = 0;
snd_pcm_group_for_each_entry(s, substream) {
if (s->pcm->card != substream->pcm->card)
continue;
azx_dev = get_azx_dev(s);
if (azx_sd_readb(azx_dev, SD_CTL) &
SD_CTL_DMA_START)
nwait++;
}
if (!nwait)
break;
cpu_relax();
}
}
spin_lock(&chip->reg_lock);
/* reset SYNC bits */
if (chip->driver_caps & AZX_DCAPS_OLD_SSYNC)
azx_writel(chip, OLD_SSYNC,
azx_readl(chip, OLD_SSYNC) & ~sbits);
else
azx_writel(chip, SSYNC, azx_readl(chip, SSYNC) & ~sbits);
if (start) {
azx_timecounter_init(substream, 0, 0);
if (nsync > 1) {
cycle_t cycle_last;
/* same start cycle for master and group */
azx_dev = get_azx_dev(substream);
cycle_last = azx_dev->azx_tc.cycle_last;
snd_pcm_group_for_each_entry(s, substream) {
if (s->pcm->card != substream->pcm->card)
continue;
azx_timecounter_init(s, 1, cycle_last);
}
}
}
spin_unlock(&chip->reg_lock);
return 0;
}
/* get the current DMA position with correction on VIA chips */
static unsigned int azx_via_get_position(struct azx *chip,
struct azx_dev *azx_dev)
{
unsigned int link_pos, mini_pos, bound_pos;
unsigned int mod_link_pos, mod_dma_pos, mod_mini_pos;
unsigned int fifo_size;
link_pos = azx_sd_readl(azx_dev, SD_LPIB);
if (azx_dev->substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
/* Playback, no problem using link position */
return link_pos;
}
/* Capture */
/* For new chipset,
* use mod to get the DMA position just like old chipset
*/
mod_dma_pos = le32_to_cpu(*azx_dev->posbuf);
mod_dma_pos %= azx_dev->period_bytes;
/* azx_dev->fifo_size can't get FIFO size of in stream.
* Get from base address + offset.
*/
fifo_size = readw(chip->remap_addr + VIA_IN_STREAM0_FIFO_SIZE_OFFSET);
if (azx_dev->insufficient) {
/* Link position never gather than FIFO size */
if (link_pos <= fifo_size)
return 0;
azx_dev->insufficient = 0;
}
if (link_pos <= fifo_size)
mini_pos = azx_dev->bufsize + link_pos - fifo_size;
else
mini_pos = link_pos - fifo_size;
/* Find nearest previous boudary */
mod_mini_pos = mini_pos % azx_dev->period_bytes;
mod_link_pos = link_pos % azx_dev->period_bytes;
if (mod_link_pos >= fifo_size)
bound_pos = link_pos - mod_link_pos;
else if (mod_dma_pos >= mod_mini_pos)
bound_pos = mini_pos - mod_mini_pos;
else {
bound_pos = mini_pos - mod_mini_pos + azx_dev->period_bytes;
if (bound_pos >= azx_dev->bufsize)
bound_pos = 0;
}
/* Calculate real DMA position we want */
return bound_pos + mod_dma_pos;
}
static unsigned int azx_get_position(struct azx *chip,
struct azx_dev *azx_dev,
bool with_check)
{
unsigned int pos;
int stream = azx_dev->substream->stream;
int delay = 0;
switch (chip->position_fix[stream]) {
case POS_FIX_LPIB:
/* read LPIB */
pos = azx_sd_readl(azx_dev, SD_LPIB);
break;
case POS_FIX_VIACOMBO:
pos = azx_via_get_position(chip, azx_dev);
break;
default:
/* use the position buffer */
pos = le32_to_cpu(*azx_dev->posbuf);
if (with_check && chip->position_fix[stream] == POS_FIX_AUTO) {
if (!pos || pos == (u32)-1) {
printk(KERN_WARNING
"hda-intel: Invalid position buffer, "
"using LPIB read method instead.\n");
chip->position_fix[stream] = POS_FIX_LPIB;
pos = azx_sd_readl(azx_dev, SD_LPIB);
} else
chip->position_fix[stream] = POS_FIX_POSBUF;
}
break;
}
if (pos >= azx_dev->bufsize)
pos = 0;
/* calculate runtime delay from LPIB */
if (azx_dev->substream->runtime &&
chip->position_fix[stream] == POS_FIX_POSBUF &&
(chip->driver_caps & AZX_DCAPS_COUNT_LPIB_DELAY)) {
unsigned int lpib_pos = azx_sd_readl(azx_dev, SD_LPIB);
if (stream == SNDRV_PCM_STREAM_PLAYBACK)
delay = pos - lpib_pos;
else
delay = lpib_pos - pos;
if (delay < 0)
delay += azx_dev->bufsize;
if (delay >= azx_dev->period_bytes) {
snd_printk(KERN_WARNING SFX
"%s: Unstable LPIB (%d >= %d); "
"disabling LPIB delay counting\n",
pci_name(chip->pci), delay, azx_dev->period_bytes);
delay = 0;
chip->driver_caps &= ~AZX_DCAPS_COUNT_LPIB_DELAY;
}
azx_dev->substream->runtime->delay =
bytes_to_frames(azx_dev->substream->runtime, delay);
}
trace_azx_get_position(chip, azx_dev, pos, delay);
return pos;
}
static snd_pcm_uframes_t azx_pcm_pointer(struct snd_pcm_substream *substream)
{
struct azx_pcm *apcm = snd_pcm_substream_chip(substream);
struct azx *chip = apcm->chip;
struct azx_dev *azx_dev = get_azx_dev(substream);
return bytes_to_frames(substream->runtime,
azx_get_position(chip, azx_dev, false));
}
/*
* Check whether the current DMA position is acceptable for updating
* periods. Returns non-zero if it's OK.
*
* Many HD-audio controllers appear pretty inaccurate about
* the update-IRQ timing. The IRQ is issued before actually the
* data is processed. So, we need to process it afterwords in a
* workqueue.
*/
static int azx_position_ok(struct azx *chip, struct azx_dev *azx_dev)
{
u32 wallclk;
unsigned int pos;
wallclk = azx_readl(chip, WALLCLK) - azx_dev->start_wallclk;
if (wallclk < (azx_dev->period_wallclk * 2) / 3)
return -1; /* bogus (too early) interrupt */
pos = azx_get_position(chip, azx_dev, true);
if (WARN_ONCE(!azx_dev->period_bytes,
"hda-intel: zero azx_dev->period_bytes"))
return -1; /* this shouldn't happen! */
if (wallclk < (azx_dev->period_wallclk * 5) / 4 &&
pos % azx_dev->period_bytes > azx_dev->period_bytes / 2)
/* NG - it's below the first next period boundary */
return bdl_pos_adj[chip->dev_index] ? 0 : -1;
azx_dev->start_wallclk += wallclk;
return 1; /* OK, it's fine */
}
/*
* The work for pending PCM period updates.
*/
static void azx_irq_pending_work(struct work_struct *work)
{
struct azx *chip = container_of(work, struct azx, irq_pending_work);
int i, pending, ok;
if (!chip->irq_pending_warned) {
printk(KERN_WARNING
"hda-intel: IRQ timing workaround is activated "
"for card #%d. Suggest a bigger bdl_pos_adj.\n",
chip->card->number);
chip->irq_pending_warned = 1;
}
for (;;) {
pending = 0;
spin_lock_irq(&chip->reg_lock);
for (i = 0; i < chip->num_streams; i++) {
struct azx_dev *azx_dev = &chip->azx_dev[i];
if (!azx_dev->irq_pending ||
!azx_dev->substream ||
!azx_dev->running)
continue;
ok = azx_position_ok(chip, azx_dev);
if (ok > 0) {
azx_dev->irq_pending = 0;
spin_unlock(&chip->reg_lock);
snd_pcm_period_elapsed(azx_dev->substream);
spin_lock(&chip->reg_lock);
} else if (ok < 0) {
pending = 0; /* too early */
} else
pending++;
}
spin_unlock_irq(&chip->reg_lock);
if (!pending)
return;
msleep(1);
}
}
/* clear irq_pending flags and assure no on-going workq */
static void azx_clear_irq_pending(struct azx *chip)
{
int i;
spin_lock_irq(&chip->reg_lock);
for (i = 0; i < chip->num_streams; i++)
chip->azx_dev[i].irq_pending = 0;
spin_unlock_irq(&chip->reg_lock);
}
#ifdef CONFIG_X86
static int azx_pcm_mmap(struct snd_pcm_substream *substream,
struct vm_area_struct *area)
{
struct azx_pcm *apcm = snd_pcm_substream_chip(substream);
struct azx *chip = apcm->chip;
if (!azx_snoop(chip))
area->vm_page_prot = pgprot_writecombine(area->vm_page_prot);
return snd_pcm_lib_default_mmap(substream, area);
}
#else
#define azx_pcm_mmap NULL
#endif
static struct snd_pcm_ops azx_pcm_ops = {
.open = azx_pcm_open,
.close = azx_pcm_close,
.ioctl = snd_pcm_lib_ioctl,
.hw_params = azx_pcm_hw_params,
.hw_free = azx_pcm_hw_free,
.prepare = azx_pcm_prepare,
.trigger = azx_pcm_trigger,
.pointer = azx_pcm_pointer,
.wall_clock = azx_get_wallclock_tstamp,
.mmap = azx_pcm_mmap,
.page = snd_pcm_sgbuf_ops_page,
};
static void azx_pcm_free(struct snd_pcm *pcm)
{
struct azx_pcm *apcm = pcm->private_data;
if (apcm) {
list_del(&apcm->list);
kfree(apcm);
}
}
#define MAX_PREALLOC_SIZE (32 * 1024 * 1024)
static int
azx_attach_pcm_stream(struct hda_bus *bus, struct hda_codec *codec,
struct hda_pcm *cpcm)
{
struct azx *chip = bus->private_data;
struct snd_pcm *pcm;
struct azx_pcm *apcm;
int pcm_dev = cpcm->device;
unsigned int size;
int s, err;
list_for_each_entry(apcm, &chip->pcm_list, list) {
if (apcm->pcm->device == pcm_dev) {
snd_printk(KERN_ERR SFX "%s: PCM %d already exists\n",
pci_name(chip->pci), pcm_dev);
return -EBUSY;
}
}
err = snd_pcm_new(chip->card, cpcm->name, pcm_dev,
cpcm->stream[SNDRV_PCM_STREAM_PLAYBACK].substreams,
cpcm->stream[SNDRV_PCM_STREAM_CAPTURE].substreams,
&pcm);
if (err < 0)
return err;
strlcpy(pcm->name, cpcm->name, sizeof(pcm->name));
apcm = kzalloc(sizeof(*apcm), GFP_KERNEL);
if (apcm == NULL)
return -ENOMEM;
apcm->chip = chip;
apcm->pcm = pcm;
apcm->codec = codec;
pcm->private_data = apcm;
pcm->private_free = azx_pcm_free;
if (cpcm->pcm_type == HDA_PCM_TYPE_MODEM)
pcm->dev_class = SNDRV_PCM_CLASS_MODEM;
list_add_tail(&apcm->list, &chip->pcm_list);
cpcm->pcm = pcm;
for (s = 0; s < 2; s++) {
apcm->hinfo[s] = &cpcm->stream[s];
if (cpcm->stream[s].substreams)
snd_pcm_set_ops(pcm, s, &azx_pcm_ops);
}
/* buffer pre-allocation */
size = CONFIG_SND_HDA_PREALLOC_SIZE * 1024;
if (size > MAX_PREALLOC_SIZE)
size = MAX_PREALLOC_SIZE;
snd_pcm_lib_preallocate_pages_for_all(pcm, SNDRV_DMA_TYPE_DEV_SG,
snd_dma_pci_data(chip->pci),
size, MAX_PREALLOC_SIZE);
return 0;
}
/*
* mixer creation - all stuff is implemented in hda module
*/
static int azx_mixer_create(struct azx *chip)
{
return snd_hda_build_controls(chip->bus);
}
/*
* initialize SD streams
*/
static int azx_init_stream(struct azx *chip)
{
int i;
/* initialize each stream (aka device)
* assign the starting bdl address to each stream (device)
* and initialize
*/
for (i = 0; i < chip->num_streams; i++) {
struct azx_dev *azx_dev = &chip->azx_dev[i];
azx_dev->posbuf = (u32 __iomem *)(chip->posbuf.area + i * 8);
/* offset: SDI0=0x80, SDI1=0xa0, ... SDO3=0x160 */
azx_dev->sd_addr = chip->remap_addr + (0x20 * i + 0x80);
/* int mask: SDI0=0x01, SDI1=0x02, ... SDO3=0x80 */
azx_dev->sd_int_sta_mask = 1 << i;
/* stream tag: must be non-zero and unique */
azx_dev->index = i;
azx_dev->stream_tag = i + 1;
}
return 0;
}
static int azx_acquire_irq(struct azx *chip, int do_disconnect)
{
if (request_irq(chip->pci->irq, azx_interrupt,
chip->msi ? 0 : IRQF_SHARED,
KBUILD_MODNAME, chip)) {
printk(KERN_ERR "hda-intel: unable to grab IRQ %d, "
"disabling device\n", chip->pci->irq);
if (do_disconnect)
snd_card_disconnect(chip->card);
return -1;
}
chip->irq = chip->pci->irq;
pci_intx(chip->pci, !chip->msi);
return 0;
}
static void azx_stop_chip(struct azx *chip)
{
if (!chip->initialized)
return;
/* disable interrupts */
azx_int_disable(chip);
azx_int_clear(chip);
/* disable CORB/RIRB */
azx_free_cmd_io(chip);
/* disable position buffer */
azx_writel(chip, DPLBASE, 0);
azx_writel(chip, DPUBASE, 0);
chip->initialized = 0;
}
#ifdef CONFIG_SND_HDA_DSP_LOADER
/*
* DSP loading code (e.g. for CA0132)
*/
/* use the first stream for loading DSP */
static struct azx_dev *
azx_get_dsp_loader_dev(struct azx *chip)
{
return &chip->azx_dev[chip->playback_index_offset];
}
static int azx_load_dsp_prepare(struct hda_bus *bus, unsigned int format,
unsigned int byte_size,
struct snd_dma_buffer *bufp)
{
u32 *bdl;
struct azx *chip = bus->private_data;
struct azx_dev *azx_dev;
int err;
if (snd_hda_lock_devices(bus))
return -EBUSY;
err = snd_dma_alloc_pages(SNDRV_DMA_TYPE_DEV_SG,
snd_dma_pci_data(chip->pci),
byte_size, bufp);
if (err < 0)
goto error;
azx_dev = azx_get_dsp_loader_dev(chip);
azx_dev->bufsize = byte_size;
azx_dev->period_bytes = byte_size;
azx_dev->format_val = format;
azx_stream_reset(chip, azx_dev);
/* reset BDL address */
azx_sd_writel(azx_dev, SD_BDLPL, 0);
azx_sd_writel(azx_dev, SD_BDLPU, 0);
azx_dev->frags = 0;
bdl = (u32 *)azx_dev->bdl.area;
err = setup_bdle(chip, bufp, azx_dev, &bdl, 0, byte_size, 0);
if (err < 0)
goto error;
azx_setup_controller(chip, azx_dev);
return azx_dev->stream_tag;
error:
snd_hda_unlock_devices(bus);
return err;
}
static void azx_load_dsp_trigger(struct hda_bus *bus, bool start)
{
struct azx *chip = bus->private_data;
struct azx_dev *azx_dev = azx_get_dsp_loader_dev(chip);
if (start)
azx_stream_start(chip, azx_dev);
else
azx_stream_stop(chip, azx_dev);
azx_dev->running = start;
}
static void azx_load_dsp_cleanup(struct hda_bus *bus,
struct snd_dma_buffer *dmab)
{
struct azx *chip = bus->private_data;
struct azx_dev *azx_dev = azx_get_dsp_loader_dev(chip);
/* reset BDL address */
azx_sd_writel(azx_dev, SD_BDLPL, 0);
azx_sd_writel(azx_dev, SD_BDLPU, 0);
azx_sd_writel(azx_dev, SD_CTL, 0);
azx_dev->bufsize = 0;
azx_dev->period_bytes = 0;
azx_dev->format_val = 0;
snd_dma_free_pages(dmab);
snd_hda_unlock_devices(bus);
}
#endif /* CONFIG_SND_HDA_DSP_LOADER */
#ifdef CONFIG_PM
/* power-up/down the controller */
static void azx_power_notify(struct hda_bus *bus, bool power_up)
{
struct azx *chip = bus->private_data;
if (!(chip->driver_caps & AZX_DCAPS_PM_RUNTIME))
return;
if (power_up)
ALSA: hda - add runtime PM support Runtime PM can bring more power saving: - When the controller is suspended, its parent device will also have a chance to suspend. - PCI subsystem can choose the lowest power state the controller can signal wake up from. This state can be D3cold on platforms with ACPI PM support. And runtime PM can provide a gerneral sysfs interface for a system policy manager. Runtime PM support is based on current HDA power saving implementation. The user can enable runtime PM on platfroms that provide acceptable latency on transition from D3 to D0. Details: - When both power saving and runtime PM are enabled: -- If a codec supports 'stop-clock' in D3, it will request suspending the controller after it enters D3 and request resuming the controller before back to D0. Thus the controller will be suspended only when all codecs are suspended and support stop-clock in D3. -- User IO operations and HW wakeup signal can resume the controller back to D0. - If runtime PM is disabled, power saving just works as before. - If power saving is disabled, the controller won't be suspended because the power usage counter can never be 0. More about 'stop-clock' feature: If a codec can support targeted pass-through operations in D3 state when there is no BCLK present on the link, it will set CLKSTOP flag in the supported power states and report PS-ClkStopOk when entering D3 state. Please refer to HDA spec section 7.3.3.10 Power state and 7.3.4.12 Supported Power State. [Fixed CONFIG_PM_RUNTIME dependency in hda_intel.c by tiwai] Signed-off-by: Mengdong Lin <mengdong.lin@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-08-23 09:32:30 +00:00
pm_runtime_get_sync(&chip->pci->dev);
else
pm_runtime_put_sync(&chip->pci->dev);
}
static DEFINE_MUTEX(card_list_lock);
static LIST_HEAD(card_list);
static void azx_add_card_list(struct azx *chip)
{
mutex_lock(&card_list_lock);
list_add(&chip->list, &card_list);
mutex_unlock(&card_list_lock);
}
static void azx_del_card_list(struct azx *chip)
{
mutex_lock(&card_list_lock);
list_del_init(&chip->list);
mutex_unlock(&card_list_lock);
}
/* trigger power-save check at writing parameter */
static int param_set_xint(const char *val, const struct kernel_param *kp)
{
struct azx *chip;
struct hda_codec *c;
int prev = power_save;
int ret = param_set_int(val, kp);
if (ret || prev == power_save)
return ret;
mutex_lock(&card_list_lock);
list_for_each_entry(chip, &card_list, list) {
if (!chip->bus || chip->disabled)
continue;
list_for_each_entry(c, &chip->bus->codec_list, list)
snd_hda_power_sync(c);
}
mutex_unlock(&card_list_lock);
return 0;
}
#else
#define azx_add_card_list(chip) /* NOP */
#define azx_del_card_list(chip) /* NOP */
#endif /* CONFIG_PM */
#if defined(CONFIG_PM_SLEEP) || defined(SUPPORT_VGA_SWITCHEROO)
/*
* power management
*/
static int azx_suspend(struct device *dev)
{
struct pci_dev *pci = to_pci_dev(dev);
struct snd_card *card = dev_get_drvdata(dev);
struct azx *chip = card->private_data;
struct azx_pcm *p;
if (chip->disabled)
return 0;
snd_power_change_state(card, SNDRV_CTL_POWER_D3hot);
azx_clear_irq_pending(chip);
list_for_each_entry(p, &chip->pcm_list, list)
snd_pcm_suspend_all(p->pcm);
if (chip->initialized)
snd_hda_suspend(chip->bus);
azx_stop_chip(chip);
if (chip->irq >= 0) {
free_irq(chip->irq, chip);
chip->irq = -1;
}
if (chip->msi)
pci_disable_msi(chip->pci);
pci_disable_device(pci);
pci_save_state(pci);
pci_set_power_state(pci, PCI_D3hot);
return 0;
}
static int azx_resume(struct device *dev)
{
struct pci_dev *pci = to_pci_dev(dev);
struct snd_card *card = dev_get_drvdata(dev);
struct azx *chip = card->private_data;
if (chip->disabled)
return 0;
pci_set_power_state(pci, PCI_D0);
pci_restore_state(pci);
if (pci_enable_device(pci) < 0) {
printk(KERN_ERR "hda-intel: pci_enable_device failed, "
"disabling device\n");
snd_card_disconnect(card);
return -EIO;
}
pci_set_master(pci);
if (chip->msi)
if (pci_enable_msi(pci) < 0)
chip->msi = 0;
if (azx_acquire_irq(chip, 1) < 0)
return -EIO;
azx_init_pci(chip);
azx_init_chip(chip, 1);
snd_hda_resume(chip->bus);
snd_power_change_state(card, SNDRV_CTL_POWER_D0);
return 0;
}
ALSA: hda - add runtime PM support Runtime PM can bring more power saving: - When the controller is suspended, its parent device will also have a chance to suspend. - PCI subsystem can choose the lowest power state the controller can signal wake up from. This state can be D3cold on platforms with ACPI PM support. And runtime PM can provide a gerneral sysfs interface for a system policy manager. Runtime PM support is based on current HDA power saving implementation. The user can enable runtime PM on platfroms that provide acceptable latency on transition from D3 to D0. Details: - When both power saving and runtime PM are enabled: -- If a codec supports 'stop-clock' in D3, it will request suspending the controller after it enters D3 and request resuming the controller before back to D0. Thus the controller will be suspended only when all codecs are suspended and support stop-clock in D3. -- User IO operations and HW wakeup signal can resume the controller back to D0. - If runtime PM is disabled, power saving just works as before. - If power saving is disabled, the controller won't be suspended because the power usage counter can never be 0. More about 'stop-clock' feature: If a codec can support targeted pass-through operations in D3 state when there is no BCLK present on the link, it will set CLKSTOP flag in the supported power states and report PS-ClkStopOk when entering D3 state. Please refer to HDA spec section 7.3.3.10 Power state and 7.3.4.12 Supported Power State. [Fixed CONFIG_PM_RUNTIME dependency in hda_intel.c by tiwai] Signed-off-by: Mengdong Lin <mengdong.lin@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-08-23 09:32:30 +00:00
#endif /* CONFIG_PM_SLEEP || SUPPORT_VGA_SWITCHEROO */
#ifdef CONFIG_PM_RUNTIME
static int azx_runtime_suspend(struct device *dev)
{
struct snd_card *card = dev_get_drvdata(dev);
struct azx *chip = card->private_data;
azx_stop_chip(chip);
azx_clear_irq_pending(chip);
return 0;
}
static int azx_runtime_resume(struct device *dev)
{
struct snd_card *card = dev_get_drvdata(dev);
struct azx *chip = card->private_data;
azx_init_pci(chip);
azx_init_chip(chip, 1);
return 0;
}
static int azx_runtime_idle(struct device *dev)
{
struct snd_card *card = dev_get_drvdata(dev);
struct azx *chip = card->private_data;
if (power_save_controller > 0)
return 0;
if (!power_save_controller ||
!(chip->driver_caps & AZX_DCAPS_PM_RUNTIME))
return -EBUSY;
return 0;
}
ALSA: hda - add runtime PM support Runtime PM can bring more power saving: - When the controller is suspended, its parent device will also have a chance to suspend. - PCI subsystem can choose the lowest power state the controller can signal wake up from. This state can be D3cold on platforms with ACPI PM support. And runtime PM can provide a gerneral sysfs interface for a system policy manager. Runtime PM support is based on current HDA power saving implementation. The user can enable runtime PM on platfroms that provide acceptable latency on transition from D3 to D0. Details: - When both power saving and runtime PM are enabled: -- If a codec supports 'stop-clock' in D3, it will request suspending the controller after it enters D3 and request resuming the controller before back to D0. Thus the controller will be suspended only when all codecs are suspended and support stop-clock in D3. -- User IO operations and HW wakeup signal can resume the controller back to D0. - If runtime PM is disabled, power saving just works as before. - If power saving is disabled, the controller won't be suspended because the power usage counter can never be 0. More about 'stop-clock' feature: If a codec can support targeted pass-through operations in D3 state when there is no BCLK present on the link, it will set CLKSTOP flag in the supported power states and report PS-ClkStopOk when entering D3 state. Please refer to HDA spec section 7.3.3.10 Power state and 7.3.4.12 Supported Power State. [Fixed CONFIG_PM_RUNTIME dependency in hda_intel.c by tiwai] Signed-off-by: Mengdong Lin <mengdong.lin@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-08-23 09:32:30 +00:00
#endif /* CONFIG_PM_RUNTIME */
#ifdef CONFIG_PM
static const struct dev_pm_ops azx_pm = {
SET_SYSTEM_SLEEP_PM_OPS(azx_suspend, azx_resume)
SET_RUNTIME_PM_OPS(azx_runtime_suspend, azx_runtime_resume, azx_runtime_idle)
ALSA: hda - add runtime PM support Runtime PM can bring more power saving: - When the controller is suspended, its parent device will also have a chance to suspend. - PCI subsystem can choose the lowest power state the controller can signal wake up from. This state can be D3cold on platforms with ACPI PM support. And runtime PM can provide a gerneral sysfs interface for a system policy manager. Runtime PM support is based on current HDA power saving implementation. The user can enable runtime PM on platfroms that provide acceptable latency on transition from D3 to D0. Details: - When both power saving and runtime PM are enabled: -- If a codec supports 'stop-clock' in D3, it will request suspending the controller after it enters D3 and request resuming the controller before back to D0. Thus the controller will be suspended only when all codecs are suspended and support stop-clock in D3. -- User IO operations and HW wakeup signal can resume the controller back to D0. - If runtime PM is disabled, power saving just works as before. - If power saving is disabled, the controller won't be suspended because the power usage counter can never be 0. More about 'stop-clock' feature: If a codec can support targeted pass-through operations in D3 state when there is no BCLK present on the link, it will set CLKSTOP flag in the supported power states and report PS-ClkStopOk when entering D3 state. Please refer to HDA spec section 7.3.3.10 Power state and 7.3.4.12 Supported Power State. [Fixed CONFIG_PM_RUNTIME dependency in hda_intel.c by tiwai] Signed-off-by: Mengdong Lin <mengdong.lin@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-08-23 09:32:30 +00:00
};
#define AZX_PM_OPS &azx_pm
#else
#define AZX_PM_OPS NULL
ALSA: hda - add runtime PM support Runtime PM can bring more power saving: - When the controller is suspended, its parent device will also have a chance to suspend. - PCI subsystem can choose the lowest power state the controller can signal wake up from. This state can be D3cold on platforms with ACPI PM support. And runtime PM can provide a gerneral sysfs interface for a system policy manager. Runtime PM support is based on current HDA power saving implementation. The user can enable runtime PM on platfroms that provide acceptable latency on transition from D3 to D0. Details: - When both power saving and runtime PM are enabled: -- If a codec supports 'stop-clock' in D3, it will request suspending the controller after it enters D3 and request resuming the controller before back to D0. Thus the controller will be suspended only when all codecs are suspended and support stop-clock in D3. -- User IO operations and HW wakeup signal can resume the controller back to D0. - If runtime PM is disabled, power saving just works as before. - If power saving is disabled, the controller won't be suspended because the power usage counter can never be 0. More about 'stop-clock' feature: If a codec can support targeted pass-through operations in D3 state when there is no BCLK present on the link, it will set CLKSTOP flag in the supported power states and report PS-ClkStopOk when entering D3 state. Please refer to HDA spec section 7.3.3.10 Power state and 7.3.4.12 Supported Power State. [Fixed CONFIG_PM_RUNTIME dependency in hda_intel.c by tiwai] Signed-off-by: Mengdong Lin <mengdong.lin@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-08-23 09:32:30 +00:00
#endif /* CONFIG_PM */
/*
* reboot notifier for hang-up problem at power-down
*/
static int azx_halt(struct notifier_block *nb, unsigned long event, void *buf)
{
struct azx *chip = container_of(nb, struct azx, reboot_notifier);
snd_hda_bus_reboot_notify(chip->bus);
azx_stop_chip(chip);
return NOTIFY_OK;
}
static void azx_notifier_register(struct azx *chip)
{
chip->reboot_notifier.notifier_call = azx_halt;
register_reboot_notifier(&chip->reboot_notifier);
}
static void azx_notifier_unregister(struct azx *chip)
{
if (chip->reboot_notifier.notifier_call)
unregister_reboot_notifier(&chip->reboot_notifier);
}
static int azx_first_init(struct azx *chip);
static int azx_probe_continue(struct azx *chip);
#ifdef SUPPORT_VGA_SWITCHEROO
static struct pci_dev *get_bound_vga(struct pci_dev *pci);
static void azx_vs_set_state(struct pci_dev *pci,
enum vga_switcheroo_state state)
{
struct snd_card *card = pci_get_drvdata(pci);
struct azx *chip = card->private_data;
bool disabled;
wait_for_completion(&chip->probe_wait);
if (chip->init_failed)
return;
disabled = (state == VGA_SWITCHEROO_OFF);
if (chip->disabled == disabled)
return;
if (!chip->bus) {
chip->disabled = disabled;
if (!disabled) {
snd_printk(KERN_INFO SFX
"%s: Start delayed initialization\n",
pci_name(chip->pci));
if (azx_first_init(chip) < 0 ||
azx_probe_continue(chip) < 0) {
snd_printk(KERN_ERR SFX
"%s: initialization error\n",
pci_name(chip->pci));
chip->init_failed = true;
}
}
} else {
snd_printk(KERN_INFO SFX
"%s: %s via VGA-switcheroo\n", pci_name(chip->pci),
disabled ? "Disabling" : "Enabling");
if (disabled) {
azx_suspend(&pci->dev);
chip->disabled = true;
if (snd_hda_lock_devices(chip->bus))
snd_printk(KERN_WARNING SFX "%s: Cannot lock devices!\n",
pci_name(chip->pci));
} else {
snd_hda_unlock_devices(chip->bus);
chip->disabled = false;
azx_resume(&pci->dev);
}
}
}
static bool azx_vs_can_switch(struct pci_dev *pci)
{
struct snd_card *card = pci_get_drvdata(pci);
struct azx *chip = card->private_data;
wait_for_completion(&chip->probe_wait);
if (chip->init_failed)
return false;
if (chip->disabled || !chip->bus)
return true;
if (snd_hda_lock_devices(chip->bus))
return false;
snd_hda_unlock_devices(chip->bus);
return true;
}
static void init_vga_switcheroo(struct azx *chip)
{
struct pci_dev *p = get_bound_vga(chip->pci);
if (p) {
snd_printk(KERN_INFO SFX
"%s: Handle VGA-switcheroo audio client\n",
pci_name(chip->pci));
chip->use_vga_switcheroo = 1;
pci_dev_put(p);
}
}
static const struct vga_switcheroo_client_ops azx_vs_ops = {
.set_gpu_state = azx_vs_set_state,
.can_switch = azx_vs_can_switch,
};
static int register_vga_switcheroo(struct azx *chip)
{
int err;
if (!chip->use_vga_switcheroo)
return 0;
/* FIXME: currently only handling DIS controller
* is there any machine with two switchable HDMI audio controllers?
*/
err = vga_switcheroo_register_audio_client(chip->pci, &azx_vs_ops,
VGA_SWITCHEROO_DIS,
chip->bus != NULL);
if (err < 0)
return err;
chip->vga_switcheroo_registered = 1;
return 0;
}
#else
#define init_vga_switcheroo(chip) /* NOP */
#define register_vga_switcheroo(chip) 0
#define check_hdmi_disabled(pci) false
#endif /* SUPPORT_VGA_SWITCHER */
/*
* destructor
*/
static int azx_free(struct azx *chip)
{
int i;
azx_del_card_list(chip);
azx_notifier_unregister(chip);
chip->init_failed = 1; /* to be sure */
complete_all(&chip->probe_wait);
if (use_vga_switcheroo(chip)) {
if (chip->disabled && chip->bus)
snd_hda_unlock_devices(chip->bus);
if (chip->vga_switcheroo_registered)
vga_switcheroo_unregister_client(chip->pci);
}
if (chip->initialized) {
azx_clear_irq_pending(chip);
for (i = 0; i < chip->num_streams; i++)
azx_stream_stop(chip, &chip->azx_dev[i]);
azx_stop_chip(chip);
}
if (chip->irq >= 0)
free_irq(chip->irq, (void*)chip);
if (chip->msi)
pci_disable_msi(chip->pci);
if (chip->remap_addr)
iounmap(chip->remap_addr);
if (chip->azx_dev) {
for (i = 0; i < chip->num_streams; i++)
if (chip->azx_dev[i].bdl.area) {
mark_pages_wc(chip, &chip->azx_dev[i].bdl, false);
snd_dma_free_pages(&chip->azx_dev[i].bdl);
}
}
if (chip->rb.area) {
mark_pages_wc(chip, &chip->rb, false);
snd_dma_free_pages(&chip->rb);
}
if (chip->posbuf.area) {
mark_pages_wc(chip, &chip->posbuf, false);
snd_dma_free_pages(&chip->posbuf);
}
if (chip->region_requested)
pci_release_regions(chip->pci);
pci_disable_device(chip->pci);
kfree(chip->azx_dev);
#ifdef CONFIG_SND_HDA_PATCH_LOADER
if (chip->fw)
release_firmware(chip->fw);
#endif
kfree(chip);
return 0;
}
static int azx_dev_free(struct snd_device *device)
{
return azx_free(device->device_data);
}
#ifdef SUPPORT_VGA_SWITCHEROO
/*
* Check of disabled HDMI controller by vga-switcheroo
*/
static struct pci_dev *get_bound_vga(struct pci_dev *pci)
{
struct pci_dev *p;
/* check only discrete GPU */
switch (pci->vendor) {
case PCI_VENDOR_ID_ATI:
case PCI_VENDOR_ID_AMD:
case PCI_VENDOR_ID_NVIDIA:
if (pci->devfn == 1) {
p = pci_get_domain_bus_and_slot(pci_domain_nr(pci->bus),
pci->bus->number, 0);
if (p) {
if ((p->class >> 8) == PCI_CLASS_DISPLAY_VGA)
return p;
pci_dev_put(p);
}
}
break;
}
return NULL;
}
static bool check_hdmi_disabled(struct pci_dev *pci)
{
bool vga_inactive = false;
struct pci_dev *p = get_bound_vga(pci);
if (p) {
if (vga_switcheroo_get_client_state(p) == VGA_SWITCHEROO_OFF)
vga_inactive = true;
pci_dev_put(p);
}
return vga_inactive;
}
#endif /* SUPPORT_VGA_SWITCHEROO */
/*
* white/black-listing for position_fix
*/
static struct snd_pci_quirk position_fix_list[] = {
SND_PCI_QUIRK(0x1028, 0x01cc, "Dell D820", POS_FIX_LPIB),
SND_PCI_QUIRK(0x1028, 0x01de, "Dell Precision 390", POS_FIX_LPIB),
SND_PCI_QUIRK(0x103c, 0x306d, "HP dv3", POS_FIX_LPIB),
SND_PCI_QUIRK(0x1043, 0x813d, "ASUS P5AD2", POS_FIX_LPIB),
SND_PCI_QUIRK(0x1043, 0x81b3, "ASUS", POS_FIX_LPIB),
SND_PCI_QUIRK(0x1043, 0x81e7, "ASUS M2V", POS_FIX_LPIB),
SND_PCI_QUIRK(0x104d, 0x9069, "Sony VPCS11V9E", POS_FIX_LPIB),
SND_PCI_QUIRK(0x10de, 0xcb89, "Macbook Pro 7,1", POS_FIX_LPIB),
SND_PCI_QUIRK(0x1297, 0x3166, "Shuttle", POS_FIX_LPIB),
SND_PCI_QUIRK(0x1458, 0xa022, "ga-ma770-ud3", POS_FIX_LPIB),
SND_PCI_QUIRK(0x1462, 0x1002, "MSI Wind U115", POS_FIX_LPIB),
SND_PCI_QUIRK(0x1565, 0x8218, "Biostar Microtech", POS_FIX_LPIB),
SND_PCI_QUIRK(0x1849, 0x0888, "775Dual-VSTA", POS_FIX_LPIB),
SND_PCI_QUIRK(0x8086, 0x2503, "DG965OT AAD63733-203", POS_FIX_LPIB),
{}
};
static int check_position_fix(struct azx *chip, int fix)
{
const struct snd_pci_quirk *q;
switch (fix) {
case POS_FIX_AUTO:
case POS_FIX_LPIB:
case POS_FIX_POSBUF:
case POS_FIX_VIACOMBO:
case POS_FIX_COMBO:
return fix;
}
q = snd_pci_quirk_lookup(chip->pci, position_fix_list);
if (q) {
printk(KERN_INFO
"hda_intel: position_fix set to %d "
"for device %04x:%04x\n",
q->value, q->subvendor, q->subdevice);
return q->value;
}
/* Check VIA/ATI HD Audio Controller exist */
if (chip->driver_caps & AZX_DCAPS_POSFIX_VIA) {
snd_printd(SFX "%s: Using VIACOMBO position fix\n", pci_name(chip->pci));
return POS_FIX_VIACOMBO;
}
if (chip->driver_caps & AZX_DCAPS_POSFIX_LPIB) {
snd_printd(SFX "%s: Using LPIB position fix\n", pci_name(chip->pci));
return POS_FIX_LPIB;
}
return POS_FIX_AUTO;
}
/*
* black-lists for probe_mask
*/
static struct snd_pci_quirk probe_mask_list[] = {
/* Thinkpad often breaks the controller communication when accessing
* to the non-working (or non-existing) modem codec slot.
*/
SND_PCI_QUIRK(0x1014, 0x05b7, "Thinkpad Z60", 0x01),
SND_PCI_QUIRK(0x17aa, 0x2010, "Thinkpad X/T/R60", 0x01),
SND_PCI_QUIRK(0x17aa, 0x20ac, "Thinkpad X/T/R61", 0x01),
/* broken BIOS */
SND_PCI_QUIRK(0x1028, 0x20ac, "Dell Studio Desktop", 0x01),
/* including bogus ALC268 in slot#2 that conflicts with ALC888 */
SND_PCI_QUIRK(0x17c0, 0x4085, "Medion MD96630", 0x01),
/* forced codec slots */
SND_PCI_QUIRK(0x1043, 0x1262, "ASUS W5Fm", 0x103),
SND_PCI_QUIRK(0x1046, 0x1262, "ASUS W5F", 0x103),
/* WinFast VP200 H (Teradici) user reported broken communication */
SND_PCI_QUIRK(0x3a21, 0x040d, "WinFast VP200 H", 0x101),
{}
};
#define AZX_FORCE_CODEC_MASK 0x100
static void check_probe_mask(struct azx *chip, int dev)
{
const struct snd_pci_quirk *q;
chip->codec_probe_mask = probe_mask[dev];
if (chip->codec_probe_mask == -1) {
q = snd_pci_quirk_lookup(chip->pci, probe_mask_list);
if (q) {
printk(KERN_INFO
"hda_intel: probe_mask set to 0x%x "
"for device %04x:%04x\n",
q->value, q->subvendor, q->subdevice);
chip->codec_probe_mask = q->value;
}
}
/* check forced option */
if (chip->codec_probe_mask != -1 &&
(chip->codec_probe_mask & AZX_FORCE_CODEC_MASK)) {
chip->codec_mask = chip->codec_probe_mask & 0xff;
printk(KERN_INFO "hda_intel: codec_mask forced to 0x%x\n",
chip->codec_mask);
}
}
/*
* white/black-list for enable_msi
*/
static struct snd_pci_quirk msi_black_list[] = {
SND_PCI_QUIRK(0x1043, 0x81f2, "ASUS", 0), /* Athlon64 X2 + nvidia */
SND_PCI_QUIRK(0x1043, 0x81f6, "ASUS", 0), /* nvidia */
SND_PCI_QUIRK(0x1043, 0x822d, "ASUS", 0), /* Athlon64 X2 + nvidia MCP55 */
SND_PCI_QUIRK(0x1849, 0x0888, "ASRock", 0), /* Athlon64 X2 + nvidia */
SND_PCI_QUIRK(0xa0a0, 0x0575, "Aopen MZ915-M", 0), /* ICH6 */
{}
};
static void check_msi(struct azx *chip)
{
const struct snd_pci_quirk *q;
if (enable_msi >= 0) {
chip->msi = !!enable_msi;
return;
}
chip->msi = 1; /* enable MSI as default */
q = snd_pci_quirk_lookup(chip->pci, msi_black_list);
if (q) {
printk(KERN_INFO
"hda_intel: msi for device %04x:%04x set to %d\n",
q->subvendor, q->subdevice, q->value);
chip->msi = q->value;
return;
}
/* NVidia chipsets seem to cause troubles with MSI */
if (chip->driver_caps & AZX_DCAPS_NO_MSI) {
printk(KERN_INFO "hda_intel: Disabling MSI\n");
chip->msi = 0;
}
}
/* check the snoop mode availability */
static void azx_check_snoop_available(struct azx *chip)
{
bool snoop = chip->snoop;
switch (chip->driver_type) {
case AZX_DRIVER_VIA:
/* force to non-snoop mode for a new VIA controller
* when BIOS is set
*/
if (snoop) {
u8 val;
pci_read_config_byte(chip->pci, 0x42, &val);
if (!(val & 0x80) && chip->pci->revision == 0x30)
snoop = false;
}
break;
case AZX_DRIVER_ATIHDMI_NS:
/* new ATI HDMI requires non-snoop */
snoop = false;
break;
case AZX_DRIVER_CTHDA:
snoop = false;
break;
}
if (snoop != chip->snoop) {
snd_printk(KERN_INFO SFX "%s: Force to %s mode\n",
pci_name(chip->pci), snoop ? "snoop" : "non-snoop");
chip->snoop = snoop;
}
}
/*
* constructor
*/
static int azx_create(struct snd_card *card, struct pci_dev *pci,
int dev, unsigned int driver_caps,
struct azx **rchip)
{
static struct snd_device_ops ops = {
.dev_free = azx_dev_free,
};
struct azx *chip;
int err;
*rchip = NULL;
err = pci_enable_device(pci);
if (err < 0)
return err;
chip = kzalloc(sizeof(*chip), GFP_KERNEL);
if (!chip) {
snd_printk(KERN_ERR SFX "%s: Cannot allocate chip\n", pci_name(pci));
pci_disable_device(pci);
return -ENOMEM;
}
spin_lock_init(&chip->reg_lock);
mutex_init(&chip->open_mutex);
chip->card = card;
chip->pci = pci;
chip->irq = -1;
chip->driver_caps = driver_caps;
chip->driver_type = driver_caps & 0xff;
check_msi(chip);
chip->dev_index = dev;
INIT_WORK(&chip->irq_pending_work, azx_irq_pending_work);
INIT_LIST_HEAD(&chip->pcm_list);
INIT_LIST_HEAD(&chip->list);
init_vga_switcheroo(chip);
init_completion(&chip->probe_wait);
chip->position_fix[0] = chip->position_fix[1] =
check_position_fix(chip, position_fix[dev]);
/* combo mode uses LPIB for playback */
if (chip->position_fix[0] == POS_FIX_COMBO) {
chip->position_fix[0] = POS_FIX_LPIB;
chip->position_fix[1] = POS_FIX_AUTO;
}
check_probe_mask(chip, dev);
chip->single_cmd = single_cmd;
chip->snoop = hda_snoop;
azx_check_snoop_available(chip);
if (bdl_pos_adj[dev] < 0) {
switch (chip->driver_type) {
case AZX_DRIVER_ICH:
case AZX_DRIVER_PCH:
bdl_pos_adj[dev] = 1;
break;
default:
bdl_pos_adj[dev] = 32;
break;
}
}
err = snd_device_new(card, SNDRV_DEV_LOWLEVEL, chip, &ops);
if (err < 0) {
snd_printk(KERN_ERR SFX "%s: Error creating device [card]!\n",
pci_name(chip->pci));
azx_free(chip);
return err;
}
*rchip = chip;
return 0;
}
static int azx_first_init(struct azx *chip)
{
int dev = chip->dev_index;
struct pci_dev *pci = chip->pci;
struct snd_card *card = chip->card;
int i, err;
unsigned short gcap;
#if BITS_PER_LONG != 64
/* Fix up base address on ULI M5461 */
if (chip->driver_type == AZX_DRIVER_ULI) {
u16 tmp3;
pci_read_config_word(pci, 0x40, &tmp3);
pci_write_config_word(pci, 0x40, tmp3 | 0x10);
pci_write_config_dword(pci, PCI_BASE_ADDRESS_1, 0);
}
#endif
err = pci_request_regions(pci, "ICH HD audio");
if (err < 0)
return err;
chip->region_requested = 1;
chip->addr = pci_resource_start(pci, 0);
chip->remap_addr = pci_ioremap_bar(pci, 0);
if (chip->remap_addr == NULL) {
snd_printk(KERN_ERR SFX "%s: ioremap error\n", pci_name(chip->pci));
return -ENXIO;
}
if (chip->msi)
if (pci_enable_msi(pci) < 0)
chip->msi = 0;
if (azx_acquire_irq(chip, 0) < 0)
return -EBUSY;
pci_set_master(pci);
synchronize_irq(chip->irq);
gcap = azx_readw(chip, GCAP);
snd_printdd(SFX "%s: chipset global capabilities = 0x%x\n", pci_name(chip->pci), gcap);
/* disable SB600 64bit support for safety */
if (chip->pci->vendor == PCI_VENDOR_ID_ATI) {
struct pci_dev *p_smbus;
p_smbus = pci_get_device(PCI_VENDOR_ID_ATI,
PCI_DEVICE_ID_ATI_SBX00_SMBUS,
NULL);
if (p_smbus) {
if (p_smbus->revision < 0x30)
gcap &= ~ICH6_GCAP_64OK;
pci_dev_put(p_smbus);
}
}
/* disable 64bit DMA address on some devices */
if (chip->driver_caps & AZX_DCAPS_NO_64BIT) {
snd_printd(SFX "%s: Disabling 64bit DMA\n", pci_name(chip->pci));
gcap &= ~ICH6_GCAP_64OK;
}
/* disable buffer size rounding to 128-byte multiples if supported */
if (align_buffer_size >= 0)
chip->align_buffer_size = !!align_buffer_size;
else {
if (chip->driver_caps & AZX_DCAPS_BUFSIZE)
chip->align_buffer_size = 0;
else if (chip->driver_caps & AZX_DCAPS_ALIGN_BUFSIZE)
chip->align_buffer_size = 1;
else
chip->align_buffer_size = 1;
}
/* allow 64bit DMA address if supported by H/W */
if ((gcap & ICH6_GCAP_64OK) && !pci_set_dma_mask(pci, DMA_BIT_MASK(64)))
pci_set_consistent_dma_mask(pci, DMA_BIT_MASK(64));
else {
pci_set_dma_mask(pci, DMA_BIT_MASK(32));
pci_set_consistent_dma_mask(pci, DMA_BIT_MASK(32));
}
/* read number of streams from GCAP register instead of using
* hardcoded value
*/
chip->capture_streams = (gcap >> 8) & 0x0f;
chip->playback_streams = (gcap >> 12) & 0x0f;
if (!chip->playback_streams && !chip->capture_streams) {
/* gcap didn't give any info, switching to old method */
switch (chip->driver_type) {
case AZX_DRIVER_ULI:
chip->playback_streams = ULI_NUM_PLAYBACK;
chip->capture_streams = ULI_NUM_CAPTURE;
break;
case AZX_DRIVER_ATIHDMI:
case AZX_DRIVER_ATIHDMI_NS:
chip->playback_streams = ATIHDMI_NUM_PLAYBACK;
chip->capture_streams = ATIHDMI_NUM_CAPTURE;
break;
case AZX_DRIVER_GENERIC:
default:
chip->playback_streams = ICH6_NUM_PLAYBACK;
chip->capture_streams = ICH6_NUM_CAPTURE;
break;
}
}
chip->capture_index_offset = 0;
chip->playback_index_offset = chip->capture_streams;
chip->num_streams = chip->playback_streams + chip->capture_streams;
chip->azx_dev = kcalloc(chip->num_streams, sizeof(*chip->azx_dev),
GFP_KERNEL);
if (!chip->azx_dev) {
snd_printk(KERN_ERR SFX "%s: cannot malloc azx_dev\n", pci_name(chip->pci));
return -ENOMEM;
}
for (i = 0; i < chip->num_streams; i++) {
/* allocate memory for the BDL for each stream */
err = snd_dma_alloc_pages(SNDRV_DMA_TYPE_DEV,
snd_dma_pci_data(chip->pci),
BDL_SIZE, &chip->azx_dev[i].bdl);
if (err < 0) {
snd_printk(KERN_ERR SFX "%s: cannot allocate BDL\n", pci_name(chip->pci));
return -ENOMEM;
}
mark_pages_wc(chip, &chip->azx_dev[i].bdl, true);
}
/* allocate memory for the position buffer */
err = snd_dma_alloc_pages(SNDRV_DMA_TYPE_DEV,
snd_dma_pci_data(chip->pci),
chip->num_streams * 8, &chip->posbuf);
if (err < 0) {
snd_printk(KERN_ERR SFX "%s: cannot allocate posbuf\n", pci_name(chip->pci));
return -ENOMEM;
}
mark_pages_wc(chip, &chip->posbuf, true);
/* allocate CORB/RIRB */
err = azx_alloc_cmd_io(chip);
if (err < 0)
return err;
/* initialize streams */
azx_init_stream(chip);
/* initialize chip */
azx_init_pci(chip);
azx_init_chip(chip, (probe_only[dev] & 2) == 0);
/* codec detection */
if (!chip->codec_mask) {
snd_printk(KERN_ERR SFX "%s: no codecs found!\n", pci_name(chip->pci));
return -ENODEV;
}
strcpy(card->driver, "HDA-Intel");
strlcpy(card->shortname, driver_short_names[chip->driver_type],
sizeof(card->shortname));
snprintf(card->longname, sizeof(card->longname),
"%s at 0x%lx irq %i",
card->shortname, chip->addr, chip->irq);
return 0;
}
static void power_down_all_codecs(struct azx *chip)
{
#ifdef CONFIG_PM
/* The codecs were powered up in snd_hda_codec_new().
* Now all initialization done, so turn them down if possible
*/
struct hda_codec *codec;
list_for_each_entry(codec, &chip->bus->codec_list, list) {
snd_hda_power_down(codec);
}
#endif
}
#ifdef CONFIG_SND_HDA_PATCH_LOADER
/* callback from request_firmware_nowait() */
static void azx_firmware_cb(const struct firmware *fw, void *context)
{
struct snd_card *card = context;
struct azx *chip = card->private_data;
struct pci_dev *pci = chip->pci;
if (!fw) {
snd_printk(KERN_ERR SFX "%s: Cannot load firmware, aborting\n",
pci_name(chip->pci));
goto error;
}
chip->fw = fw;
if (!chip->disabled) {
/* continue probing */
if (azx_probe_continue(chip))
goto error;
}
return; /* OK */
error:
snd_card_free(card);
pci_set_drvdata(pci, NULL);
}
#endif
static int azx_probe(struct pci_dev *pci,
const struct pci_device_id *pci_id)
{
static int dev;
struct snd_card *card;
struct azx *chip;
bool probe_now;
int err;
if (dev >= SNDRV_CARDS)
return -ENODEV;
if (!enable[dev]) {
dev++;
return -ENOENT;
}
err = snd_card_create(index[dev], id[dev], THIS_MODULE, 0, &card);
if (err < 0) {
snd_printk(KERN_ERR "hda-intel: Error creating card!\n");
return err;
}
snd_card_set_dev(card, &pci->dev);
err = azx_create(card, pci, dev, pci_id->driver_data, &chip);
if (err < 0)
goto out_free;
card->private_data = chip;
pci_set_drvdata(pci, card);
err = register_vga_switcheroo(chip);
if (err < 0) {
snd_printk(KERN_ERR SFX
"%s: Error registering VGA-switcheroo client\n", pci_name(pci));
goto out_free;
}
if (check_hdmi_disabled(pci)) {
snd_printk(KERN_INFO SFX "%s: VGA controller is disabled\n",
pci_name(pci));
snd_printk(KERN_INFO SFX "%s: Delaying initialization\n", pci_name(pci));
chip->disabled = true;
}
probe_now = !chip->disabled;
if (probe_now) {
err = azx_first_init(chip);
if (err < 0)
goto out_free;
}
#ifdef CONFIG_SND_HDA_PATCH_LOADER
if (patch[dev] && *patch[dev]) {
snd_printk(KERN_ERR SFX "%s: Applying patch firmware '%s'\n",
pci_name(pci), patch[dev]);
err = request_firmware_nowait(THIS_MODULE, true, patch[dev],
&pci->dev, GFP_KERNEL, card,
azx_firmware_cb);
if (err < 0)
goto out_free;
probe_now = false; /* continued in azx_firmware_cb() */
}
#endif /* CONFIG_SND_HDA_PATCH_LOADER */
if (probe_now) {
err = azx_probe_continue(chip);
if (err < 0)
goto out_free;
}
ALSA: hda - add runtime PM support Runtime PM can bring more power saving: - When the controller is suspended, its parent device will also have a chance to suspend. - PCI subsystem can choose the lowest power state the controller can signal wake up from. This state can be D3cold on platforms with ACPI PM support. And runtime PM can provide a gerneral sysfs interface for a system policy manager. Runtime PM support is based on current HDA power saving implementation. The user can enable runtime PM on platfroms that provide acceptable latency on transition from D3 to D0. Details: - When both power saving and runtime PM are enabled: -- If a codec supports 'stop-clock' in D3, it will request suspending the controller after it enters D3 and request resuming the controller before back to D0. Thus the controller will be suspended only when all codecs are suspended and support stop-clock in D3. -- User IO operations and HW wakeup signal can resume the controller back to D0. - If runtime PM is disabled, power saving just works as before. - If power saving is disabled, the controller won't be suspended because the power usage counter can never be 0. More about 'stop-clock' feature: If a codec can support targeted pass-through operations in D3 state when there is no BCLK present on the link, it will set CLKSTOP flag in the supported power states and report PS-ClkStopOk when entering D3 state. Please refer to HDA spec section 7.3.3.10 Power state and 7.3.4.12 Supported Power State. [Fixed CONFIG_PM_RUNTIME dependency in hda_intel.c by tiwai] Signed-off-by: Mengdong Lin <mengdong.lin@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-08-23 09:32:30 +00:00
if (pci_dev_run_wake(pci))
pm_runtime_put_noidle(&pci->dev);
dev++;
complete_all(&chip->probe_wait);
return 0;
out_free:
snd_card_free(card);
pci_set_drvdata(pci, NULL);
return err;
}
static int azx_probe_continue(struct azx *chip)
{
int dev = chip->dev_index;
int err;
#ifdef CONFIG_SND_HDA_INPUT_BEEP
chip->beep_mode = beep_mode[dev];
#endif
/* create codec instances */
err = azx_codec_create(chip, model[dev]);
if (err < 0)
goto out_free;
#ifdef CONFIG_SND_HDA_PATCH_LOADER
if (chip->fw) {
err = snd_hda_load_patch(chip->bus, chip->fw->size,
chip->fw->data);
if (err < 0)
goto out_free;
#ifndef CONFIG_PM
release_firmware(chip->fw); /* no longer needed */
chip->fw = NULL;
#endif
}
#endif
if ((probe_only[dev] & 1) == 0) {
err = azx_codec_configure(chip);
if (err < 0)
goto out_free;
}
/* create PCM streams */
err = snd_hda_build_pcms(chip->bus);
if (err < 0)
goto out_free;
/* create mixer controls */
err = azx_mixer_create(chip);
if (err < 0)
goto out_free;
err = snd_card_register(chip->card);
if (err < 0)
goto out_free;
chip->running = 1;
power_down_all_codecs(chip);
azx_notifier_register(chip);
azx_add_card_list(chip);
return 0;
out_free:
chip->init_failed = 1;
return err;
}
static void azx_remove(struct pci_dev *pci)
{
struct snd_card *card = pci_get_drvdata(pci);
ALSA: hda - add runtime PM support Runtime PM can bring more power saving: - When the controller is suspended, its parent device will also have a chance to suspend. - PCI subsystem can choose the lowest power state the controller can signal wake up from. This state can be D3cold on platforms with ACPI PM support. And runtime PM can provide a gerneral sysfs interface for a system policy manager. Runtime PM support is based on current HDA power saving implementation. The user can enable runtime PM on platfroms that provide acceptable latency on transition from D3 to D0. Details: - When both power saving and runtime PM are enabled: -- If a codec supports 'stop-clock' in D3, it will request suspending the controller after it enters D3 and request resuming the controller before back to D0. Thus the controller will be suspended only when all codecs are suspended and support stop-clock in D3. -- User IO operations and HW wakeup signal can resume the controller back to D0. - If runtime PM is disabled, power saving just works as before. - If power saving is disabled, the controller won't be suspended because the power usage counter can never be 0. More about 'stop-clock' feature: If a codec can support targeted pass-through operations in D3 state when there is no BCLK present on the link, it will set CLKSTOP flag in the supported power states and report PS-ClkStopOk when entering D3 state. Please refer to HDA spec section 7.3.3.10 Power state and 7.3.4.12 Supported Power State. [Fixed CONFIG_PM_RUNTIME dependency in hda_intel.c by tiwai] Signed-off-by: Mengdong Lin <mengdong.lin@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-08-23 09:32:30 +00:00
if (pci_dev_run_wake(pci))
pm_runtime_get_noresume(&pci->dev);
if (card)
snd_card_free(card);
pci_set_drvdata(pci, NULL);
}
/* PCI IDs */
static DEFINE_PCI_DEVICE_TABLE(azx_ids) = {
/* CPT */
{ PCI_DEVICE(0x8086, 0x1c20),
.driver_data = AZX_DRIVER_PCH | AZX_DCAPS_INTEL_PCH_NOPM },
/* PBG */
{ PCI_DEVICE(0x8086, 0x1d20),
.driver_data = AZX_DRIVER_PCH | AZX_DCAPS_INTEL_PCH_NOPM },
/* Panther Point */
{ PCI_DEVICE(0x8086, 0x1e20),
.driver_data = AZX_DRIVER_PCH | AZX_DCAPS_INTEL_PCH_NOPM },
/* Lynx Point */
{ PCI_DEVICE(0x8086, 0x8c20),
.driver_data = AZX_DRIVER_PCH | AZX_DCAPS_INTEL_PCH },
/* Lynx Point-LP */
{ PCI_DEVICE(0x8086, 0x9c20),
.driver_data = AZX_DRIVER_PCH | AZX_DCAPS_INTEL_PCH },
/* Lynx Point-LP */
{ PCI_DEVICE(0x8086, 0x9c21),
.driver_data = AZX_DRIVER_PCH | AZX_DCAPS_INTEL_PCH },
/* Haswell */
{ PCI_DEVICE(0x8086, 0x0a0c),
.driver_data = AZX_DRIVER_SCH | AZX_DCAPS_INTEL_PCH },
{ PCI_DEVICE(0x8086, 0x0c0c),
.driver_data = AZX_DRIVER_SCH | AZX_DCAPS_INTEL_PCH },
{ PCI_DEVICE(0x8086, 0x0d0c),
.driver_data = AZX_DRIVER_SCH | AZX_DCAPS_INTEL_PCH },
/* 5 Series/3400 */
{ PCI_DEVICE(0x8086, 0x3b56),
.driver_data = AZX_DRIVER_SCH | AZX_DCAPS_INTEL_PCH },
/* Poulsbo */
{ PCI_DEVICE(0x8086, 0x811b),
.driver_data = AZX_DRIVER_SCH | AZX_DCAPS_INTEL_PCH_NOPM },
/* Oaktrail */
{ PCI_DEVICE(0x8086, 0x080a),
.driver_data = AZX_DRIVER_SCH | AZX_DCAPS_INTEL_PCH_NOPM },
/* ICH */
{ PCI_DEVICE(0x8086, 0x2668),
.driver_data = AZX_DRIVER_ICH | AZX_DCAPS_OLD_SSYNC |
AZX_DCAPS_BUFSIZE }, /* ICH6 */
{ PCI_DEVICE(0x8086, 0x27d8),
.driver_data = AZX_DRIVER_ICH | AZX_DCAPS_OLD_SSYNC |
AZX_DCAPS_BUFSIZE }, /* ICH7 */
{ PCI_DEVICE(0x8086, 0x269a),
.driver_data = AZX_DRIVER_ICH | AZX_DCAPS_OLD_SSYNC |
AZX_DCAPS_BUFSIZE }, /* ESB2 */
{ PCI_DEVICE(0x8086, 0x284b),
.driver_data = AZX_DRIVER_ICH | AZX_DCAPS_OLD_SSYNC |
AZX_DCAPS_BUFSIZE }, /* ICH8 */
{ PCI_DEVICE(0x8086, 0x293e),
.driver_data = AZX_DRIVER_ICH | AZX_DCAPS_OLD_SSYNC |
AZX_DCAPS_BUFSIZE }, /* ICH9 */
{ PCI_DEVICE(0x8086, 0x293f),
.driver_data = AZX_DRIVER_ICH | AZX_DCAPS_OLD_SSYNC |
AZX_DCAPS_BUFSIZE }, /* ICH9 */
{ PCI_DEVICE(0x8086, 0x3a3e),
.driver_data = AZX_DRIVER_ICH | AZX_DCAPS_OLD_SSYNC |
AZX_DCAPS_BUFSIZE }, /* ICH10 */
{ PCI_DEVICE(0x8086, 0x3a6e),
.driver_data = AZX_DRIVER_ICH | AZX_DCAPS_OLD_SSYNC |
AZX_DCAPS_BUFSIZE }, /* ICH10 */
/* Generic Intel */
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_ANY_ID),
.class = PCI_CLASS_MULTIMEDIA_HD_AUDIO << 8,
.class_mask = 0xffffff,
.driver_data = AZX_DRIVER_ICH | AZX_DCAPS_BUFSIZE },
/* ATI SB 450/600/700/800/900 */
{ PCI_DEVICE(0x1002, 0x437b),
.driver_data = AZX_DRIVER_ATI | AZX_DCAPS_PRESET_ATI_SB },
{ PCI_DEVICE(0x1002, 0x4383),
.driver_data = AZX_DRIVER_ATI | AZX_DCAPS_PRESET_ATI_SB },
/* AMD Hudson */
{ PCI_DEVICE(0x1022, 0x780d),
.driver_data = AZX_DRIVER_GENERIC | AZX_DCAPS_PRESET_ATI_SB },
/* ATI HDMI */
{ PCI_DEVICE(0x1002, 0x793b),
.driver_data = AZX_DRIVER_ATIHDMI | AZX_DCAPS_PRESET_ATI_HDMI },
{ PCI_DEVICE(0x1002, 0x7919),
.driver_data = AZX_DRIVER_ATIHDMI | AZX_DCAPS_PRESET_ATI_HDMI },
{ PCI_DEVICE(0x1002, 0x960f),
.driver_data = AZX_DRIVER_ATIHDMI | AZX_DCAPS_PRESET_ATI_HDMI },
{ PCI_DEVICE(0x1002, 0x970f),
.driver_data = AZX_DRIVER_ATIHDMI | AZX_DCAPS_PRESET_ATI_HDMI },
{ PCI_DEVICE(0x1002, 0xaa00),
.driver_data = AZX_DRIVER_ATIHDMI | AZX_DCAPS_PRESET_ATI_HDMI },
{ PCI_DEVICE(0x1002, 0xaa08),
.driver_data = AZX_DRIVER_ATIHDMI | AZX_DCAPS_PRESET_ATI_HDMI },
{ PCI_DEVICE(0x1002, 0xaa10),
.driver_data = AZX_DRIVER_ATIHDMI | AZX_DCAPS_PRESET_ATI_HDMI },
{ PCI_DEVICE(0x1002, 0xaa18),
.driver_data = AZX_DRIVER_ATIHDMI | AZX_DCAPS_PRESET_ATI_HDMI },
{ PCI_DEVICE(0x1002, 0xaa20),
.driver_data = AZX_DRIVER_ATIHDMI | AZX_DCAPS_PRESET_ATI_HDMI },
{ PCI_DEVICE(0x1002, 0xaa28),
.driver_data = AZX_DRIVER_ATIHDMI | AZX_DCAPS_PRESET_ATI_HDMI },
{ PCI_DEVICE(0x1002, 0xaa30),
.driver_data = AZX_DRIVER_ATIHDMI | AZX_DCAPS_PRESET_ATI_HDMI },
{ PCI_DEVICE(0x1002, 0xaa38),
.driver_data = AZX_DRIVER_ATIHDMI | AZX_DCAPS_PRESET_ATI_HDMI },
{ PCI_DEVICE(0x1002, 0xaa40),
.driver_data = AZX_DRIVER_ATIHDMI | AZX_DCAPS_PRESET_ATI_HDMI },
{ PCI_DEVICE(0x1002, 0xaa48),
.driver_data = AZX_DRIVER_ATIHDMI | AZX_DCAPS_PRESET_ATI_HDMI },
{ PCI_DEVICE(0x1002, 0x9902),
.driver_data = AZX_DRIVER_ATIHDMI_NS | AZX_DCAPS_PRESET_ATI_HDMI },
{ PCI_DEVICE(0x1002, 0xaaa0),
.driver_data = AZX_DRIVER_ATIHDMI_NS | AZX_DCAPS_PRESET_ATI_HDMI },
{ PCI_DEVICE(0x1002, 0xaaa8),
.driver_data = AZX_DRIVER_ATIHDMI_NS | AZX_DCAPS_PRESET_ATI_HDMI },
{ PCI_DEVICE(0x1002, 0xaab0),
.driver_data = AZX_DRIVER_ATIHDMI_NS | AZX_DCAPS_PRESET_ATI_HDMI },
/* VIA VT8251/VT8237A */
{ PCI_DEVICE(0x1106, 0x3288),
.driver_data = AZX_DRIVER_VIA | AZX_DCAPS_POSFIX_VIA },
/* VIA GFX VT7122/VX900 */
{ PCI_DEVICE(0x1106, 0x9170), .driver_data = AZX_DRIVER_GENERIC },
/* VIA GFX VT6122/VX11 */
{ PCI_DEVICE(0x1106, 0x9140), .driver_data = AZX_DRIVER_GENERIC },
/* SIS966 */
{ PCI_DEVICE(0x1039, 0x7502), .driver_data = AZX_DRIVER_SIS },
/* ULI M5461 */
{ PCI_DEVICE(0x10b9, 0x5461), .driver_data = AZX_DRIVER_ULI },
/* NVIDIA MCP */
{ PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_ANY_ID),
.class = PCI_CLASS_MULTIMEDIA_HD_AUDIO << 8,
.class_mask = 0xffffff,
.driver_data = AZX_DRIVER_NVIDIA | AZX_DCAPS_PRESET_NVIDIA },
/* Teradici */
{ PCI_DEVICE(0x6549, 0x1200),
.driver_data = AZX_DRIVER_TERA | AZX_DCAPS_NO_64BIT },
{ PCI_DEVICE(0x6549, 0x2200),
.driver_data = AZX_DRIVER_TERA | AZX_DCAPS_NO_64BIT },
/* Creative X-Fi (CA0110-IBG) */
/* CTHDA chips */
{ PCI_DEVICE(0x1102, 0x0010),
.driver_data = AZX_DRIVER_CTHDA | AZX_DCAPS_PRESET_CTHDA },
{ PCI_DEVICE(0x1102, 0x0012),
.driver_data = AZX_DRIVER_CTHDA | AZX_DCAPS_PRESET_CTHDA },
#if !defined(CONFIG_SND_CTXFI) && !defined(CONFIG_SND_CTXFI_MODULE)
/* the following entry conflicts with snd-ctxfi driver,
* as ctxfi driver mutates from HD-audio to native mode with
* a special command sequence.
*/
{ PCI_DEVICE(PCI_VENDOR_ID_CREATIVE, PCI_ANY_ID),
.class = PCI_CLASS_MULTIMEDIA_HD_AUDIO << 8,
.class_mask = 0xffffff,
.driver_data = AZX_DRIVER_CTX | AZX_DCAPS_CTX_WORKAROUND |
AZX_DCAPS_RIRB_PRE_DELAY | AZX_DCAPS_POSFIX_LPIB },
#else
/* this entry seems still valid -- i.e. without emu20kx chip */
{ PCI_DEVICE(0x1102, 0x0009),
.driver_data = AZX_DRIVER_CTX | AZX_DCAPS_CTX_WORKAROUND |
AZX_DCAPS_RIRB_PRE_DELAY | AZX_DCAPS_POSFIX_LPIB },
#endif
/* Vortex86MX */
{ PCI_DEVICE(0x17f3, 0x3010), .driver_data = AZX_DRIVER_GENERIC },
/* VMware HDAudio */
{ PCI_DEVICE(0x15ad, 0x1977), .driver_data = AZX_DRIVER_GENERIC },
/* AMD/ATI Generic, PCI class code and Vendor ID for HD Audio */
{ PCI_DEVICE(PCI_VENDOR_ID_ATI, PCI_ANY_ID),
.class = PCI_CLASS_MULTIMEDIA_HD_AUDIO << 8,
.class_mask = 0xffffff,
.driver_data = AZX_DRIVER_GENERIC | AZX_DCAPS_PRESET_ATI_HDMI },
{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_ANY_ID),
.class = PCI_CLASS_MULTIMEDIA_HD_AUDIO << 8,
.class_mask = 0xffffff,
.driver_data = AZX_DRIVER_GENERIC | AZX_DCAPS_PRESET_ATI_HDMI },
{ 0, }
};
MODULE_DEVICE_TABLE(pci, azx_ids);
/* pci_driver definition */
static struct pci_driver azx_driver = {
.name = KBUILD_MODNAME,
.id_table = azx_ids,
.probe = azx_probe,
.remove = azx_remove,
.driver = {
.pm = AZX_PM_OPS,
},
};
module_pci_driver(azx_driver);