linux/arch/s390/kernel/perf_cpum_cf.c

726 lines
19 KiB
C
Raw Normal View History

/*
* Performance event support for s390x - CPU-measurement Counter Facility
*
* Copyright IBM Corp. 2012, 2017
* Author(s): Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License (version 2 only)
* as published by the Free Software Foundation.
*/
#define KMSG_COMPONENT "cpum_cf"
#define pr_fmt(fmt) KMSG_COMPONENT ": " fmt
#include <linux/kernel.h>
#include <linux/kernel_stat.h>
#include <linux/perf_event.h>
#include <linux/percpu.h>
#include <linux/notifier.h>
#include <linux/init.h>
#include <linux/export.h>
#include <asm/ctl_reg.h>
#include <asm/irq.h>
#include <asm/cpu_mf.h>
enum cpumf_ctr_set {
CPUMF_CTR_SET_BASIC = 0, /* Basic Counter Set */
CPUMF_CTR_SET_USER = 1, /* Problem-State Counter Set */
CPUMF_CTR_SET_CRYPTO = 2, /* Crypto-Activity Counter Set */
CPUMF_CTR_SET_EXT = 3, /* Extended Counter Set */
CPUMF_CTR_SET_MT_DIAG = 4, /* MT-diagnostic Counter Set */
/* Maximum number of counter sets */
CPUMF_CTR_SET_MAX,
};
#define CPUMF_LCCTL_ENABLE_SHIFT 16
#define CPUMF_LCCTL_ACTCTL_SHIFT 0
static const u64 cpumf_state_ctl[CPUMF_CTR_SET_MAX] = {
[CPUMF_CTR_SET_BASIC] = 0x02,
[CPUMF_CTR_SET_USER] = 0x04,
[CPUMF_CTR_SET_CRYPTO] = 0x08,
[CPUMF_CTR_SET_EXT] = 0x01,
[CPUMF_CTR_SET_MT_DIAG] = 0x20,
};
static void ctr_set_enable(u64 *state, int ctr_set)
{
*state |= cpumf_state_ctl[ctr_set] << CPUMF_LCCTL_ENABLE_SHIFT;
}
static void ctr_set_disable(u64 *state, int ctr_set)
{
*state &= ~(cpumf_state_ctl[ctr_set] << CPUMF_LCCTL_ENABLE_SHIFT);
}
static void ctr_set_start(u64 *state, int ctr_set)
{
*state |= cpumf_state_ctl[ctr_set] << CPUMF_LCCTL_ACTCTL_SHIFT;
}
static void ctr_set_stop(u64 *state, int ctr_set)
{
*state &= ~(cpumf_state_ctl[ctr_set] << CPUMF_LCCTL_ACTCTL_SHIFT);
}
/* Local CPUMF event structure */
struct cpu_hw_events {
struct cpumf_ctr_info info;
atomic_t ctr_set[CPUMF_CTR_SET_MAX];
u64 state, tx_state;
unsigned int flags;
2015-09-04 03:07:45 +00:00
unsigned int txn_flags;
};
static DEFINE_PER_CPU(struct cpu_hw_events, cpu_hw_events) = {
.ctr_set = {
[CPUMF_CTR_SET_BASIC] = ATOMIC_INIT(0),
[CPUMF_CTR_SET_USER] = ATOMIC_INIT(0),
[CPUMF_CTR_SET_CRYPTO] = ATOMIC_INIT(0),
[CPUMF_CTR_SET_EXT] = ATOMIC_INIT(0),
[CPUMF_CTR_SET_MT_DIAG] = ATOMIC_INIT(0),
},
.state = 0,
.flags = 0,
2015-09-04 03:07:45 +00:00
.txn_flags = 0,
};
static enum cpumf_ctr_set get_counter_set(u64 event)
{
int set = CPUMF_CTR_SET_MAX;
if (event < 32)
set = CPUMF_CTR_SET_BASIC;
else if (event < 64)
set = CPUMF_CTR_SET_USER;
else if (event < 128)
set = CPUMF_CTR_SET_CRYPTO;
else if (event < 256)
set = CPUMF_CTR_SET_EXT;
else if (event >= 448 && event < 496)
set = CPUMF_CTR_SET_MT_DIAG;
return set;
}
static int validate_ctr_version(const struct hw_perf_event *hwc)
{
struct cpu_hw_events *cpuhw;
int err = 0;
u16 mtdiag_ctl;
cpuhw = &get_cpu_var(cpu_hw_events);
/* check required version for counter sets */
switch (hwc->config_base) {
case CPUMF_CTR_SET_BASIC:
case CPUMF_CTR_SET_USER:
if (cpuhw->info.cfvn < 1)
err = -EOPNOTSUPP;
break;
case CPUMF_CTR_SET_CRYPTO:
case CPUMF_CTR_SET_EXT:
if (cpuhw->info.csvn < 1)
err = -EOPNOTSUPP;
if ((cpuhw->info.csvn == 1 && hwc->config > 159) ||
(cpuhw->info.csvn == 2 && hwc->config > 175) ||
(cpuhw->info.csvn > 2 && hwc->config > 255))
err = -EOPNOTSUPP;
break;
case CPUMF_CTR_SET_MT_DIAG:
if (cpuhw->info.csvn <= 3)
err = -EOPNOTSUPP;
/*
* MT-diagnostic counters are read-only. The counter set
* is automatically enabled and activated on all CPUs with
* multithreading (SMT). Deactivation of multithreading
* also disables the counter set. State changes are ignored
* by lcctl(). Because Linux controls SMT enablement through
* a kernel parameter only, the counter set is either disabled
* or enabled and active.
*
* Thus, the counters can only be used if SMT is on and the
* counter set is enabled and active.
*/
mtdiag_ctl = cpumf_state_ctl[CPUMF_CTR_SET_MT_DIAG];
if (!((cpuhw->info.auth_ctl & mtdiag_ctl) &&
(cpuhw->info.enable_ctl & mtdiag_ctl) &&
(cpuhw->info.act_ctl & mtdiag_ctl)))
err = -EOPNOTSUPP;
break;
}
put_cpu_var(cpu_hw_events);
return err;
}
static int validate_ctr_auth(const struct hw_perf_event *hwc)
{
struct cpu_hw_events *cpuhw;
u64 ctrs_state;
int err = 0;
cpuhw = &get_cpu_var(cpu_hw_events);
/* Check authorization for cpu counter sets.
* If the particular CPU counter set is not authorized,
* return with -ENOENT in order to fall back to other
* PMUs that might suffice the event request.
*/
ctrs_state = cpumf_state_ctl[hwc->config_base];
if (!(ctrs_state & cpuhw->info.auth_ctl))
err = -ENOENT;
put_cpu_var(cpu_hw_events);
return err;
}
/*
* Change the CPUMF state to active.
* Enable and activate the CPU-counter sets according
* to the per-cpu control state.
*/
static void cpumf_pmu_enable(struct pmu *pmu)
{
s390: Replace __get_cpu_var uses __get_cpu_var() is used for multiple purposes in the kernel source. One of them is address calculation via the form &__get_cpu_var(x). This calculates the address for the instance of the percpu variable of the current processor based on an offset. Other use cases are for storing and retrieving data from the current processors percpu area. __get_cpu_var() can be used as an lvalue when writing data or on the right side of an assignment. __get_cpu_var() is defined as : #define __get_cpu_var(var) (*this_cpu_ptr(&(var))) __get_cpu_var() always only does an address determination. However, store and retrieve operations could use a segment prefix (or global register on other platforms) to avoid the address calculation. this_cpu_write() and this_cpu_read() can directly take an offset into a percpu area and use optimized assembly code to read and write per cpu variables. This patch converts __get_cpu_var into either an explicit address calculation using this_cpu_ptr() or into a use of this_cpu operations that use the offset. Thereby address calculations are avoided and less registers are used when code is generated. At the end of the patch set all uses of __get_cpu_var have been removed so the macro is removed too. The patch set includes passes over all arches as well. Once these operations are used throughout then specialized macros can be defined in non -x86 arches as well in order to optimize per cpu access by f.e. using a global register that may be set to the per cpu base. Transformations done to __get_cpu_var() 1. Determine the address of the percpu instance of the current processor. DEFINE_PER_CPU(int, y); int *x = &__get_cpu_var(y); Converts to int *x = this_cpu_ptr(&y); 2. Same as #1 but this time an array structure is involved. DEFINE_PER_CPU(int, y[20]); int *x = __get_cpu_var(y); Converts to int *x = this_cpu_ptr(y); 3. Retrieve the content of the current processors instance of a per cpu variable. DEFINE_PER_CPU(int, y); int x = __get_cpu_var(y) Converts to int x = __this_cpu_read(y); 4. Retrieve the content of a percpu struct DEFINE_PER_CPU(struct mystruct, y); struct mystruct x = __get_cpu_var(y); Converts to memcpy(&x, this_cpu_ptr(&y), sizeof(x)); 5. Assignment to a per cpu variable DEFINE_PER_CPU(int, y) __get_cpu_var(y) = x; Converts to this_cpu_write(y, x); 6. Increment/Decrement etc of a per cpu variable DEFINE_PER_CPU(int, y); __get_cpu_var(y)++ Converts to this_cpu_inc(y) Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> CC: linux390@de.ibm.com Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Christoph Lameter <cl@linux.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2014-08-17 17:30:45 +00:00
struct cpu_hw_events *cpuhw = this_cpu_ptr(&cpu_hw_events);
int err;
if (cpuhw->flags & PMU_F_ENABLED)
return;
err = lcctl(cpuhw->state);
if (err) {
pr_err("Enabling the performance measuring unit "
"failed with rc=%x\n", err);
return;
}
cpuhw->flags |= PMU_F_ENABLED;
}
/*
* Change the CPUMF state to inactive.
* Disable and enable (inactive) the CPU-counter sets according
* to the per-cpu control state.
*/
static void cpumf_pmu_disable(struct pmu *pmu)
{
s390: Replace __get_cpu_var uses __get_cpu_var() is used for multiple purposes in the kernel source. One of them is address calculation via the form &__get_cpu_var(x). This calculates the address for the instance of the percpu variable of the current processor based on an offset. Other use cases are for storing and retrieving data from the current processors percpu area. __get_cpu_var() can be used as an lvalue when writing data or on the right side of an assignment. __get_cpu_var() is defined as : #define __get_cpu_var(var) (*this_cpu_ptr(&(var))) __get_cpu_var() always only does an address determination. However, store and retrieve operations could use a segment prefix (or global register on other platforms) to avoid the address calculation. this_cpu_write() and this_cpu_read() can directly take an offset into a percpu area and use optimized assembly code to read and write per cpu variables. This patch converts __get_cpu_var into either an explicit address calculation using this_cpu_ptr() or into a use of this_cpu operations that use the offset. Thereby address calculations are avoided and less registers are used when code is generated. At the end of the patch set all uses of __get_cpu_var have been removed so the macro is removed too. The patch set includes passes over all arches as well. Once these operations are used throughout then specialized macros can be defined in non -x86 arches as well in order to optimize per cpu access by f.e. using a global register that may be set to the per cpu base. Transformations done to __get_cpu_var() 1. Determine the address of the percpu instance of the current processor. DEFINE_PER_CPU(int, y); int *x = &__get_cpu_var(y); Converts to int *x = this_cpu_ptr(&y); 2. Same as #1 but this time an array structure is involved. DEFINE_PER_CPU(int, y[20]); int *x = __get_cpu_var(y); Converts to int *x = this_cpu_ptr(y); 3. Retrieve the content of the current processors instance of a per cpu variable. DEFINE_PER_CPU(int, y); int x = __get_cpu_var(y) Converts to int x = __this_cpu_read(y); 4. Retrieve the content of a percpu struct DEFINE_PER_CPU(struct mystruct, y); struct mystruct x = __get_cpu_var(y); Converts to memcpy(&x, this_cpu_ptr(&y), sizeof(x)); 5. Assignment to a per cpu variable DEFINE_PER_CPU(int, y) __get_cpu_var(y) = x; Converts to this_cpu_write(y, x); 6. Increment/Decrement etc of a per cpu variable DEFINE_PER_CPU(int, y); __get_cpu_var(y)++ Converts to this_cpu_inc(y) Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> CC: linux390@de.ibm.com Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Christoph Lameter <cl@linux.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2014-08-17 17:30:45 +00:00
struct cpu_hw_events *cpuhw = this_cpu_ptr(&cpu_hw_events);
int err;
u64 inactive;
if (!(cpuhw->flags & PMU_F_ENABLED))
return;
inactive = cpuhw->state & ~((1 << CPUMF_LCCTL_ENABLE_SHIFT) - 1);
err = lcctl(inactive);
if (err) {
pr_err("Disabling the performance measuring unit "
"failed with rc=%x\n", err);
return;
}
cpuhw->flags &= ~PMU_F_ENABLED;
}
/* Number of perf events counting hardware events */
static atomic_t num_events = ATOMIC_INIT(0);
/* Used to avoid races in calling reserve/release_cpumf_hardware */
static DEFINE_MUTEX(pmc_reserve_mutex);
/* CPU-measurement alerts for the counter facility */
static void cpumf_measurement_alert(struct ext_code ext_code,
unsigned int alert, unsigned long unused)
{
struct cpu_hw_events *cpuhw;
if (!(alert & CPU_MF_INT_CF_MASK))
return;
inc_irq_stat(IRQEXT_CMC);
s390: Replace __get_cpu_var uses __get_cpu_var() is used for multiple purposes in the kernel source. One of them is address calculation via the form &__get_cpu_var(x). This calculates the address for the instance of the percpu variable of the current processor based on an offset. Other use cases are for storing and retrieving data from the current processors percpu area. __get_cpu_var() can be used as an lvalue when writing data or on the right side of an assignment. __get_cpu_var() is defined as : #define __get_cpu_var(var) (*this_cpu_ptr(&(var))) __get_cpu_var() always only does an address determination. However, store and retrieve operations could use a segment prefix (or global register on other platforms) to avoid the address calculation. this_cpu_write() and this_cpu_read() can directly take an offset into a percpu area and use optimized assembly code to read and write per cpu variables. This patch converts __get_cpu_var into either an explicit address calculation using this_cpu_ptr() or into a use of this_cpu operations that use the offset. Thereby address calculations are avoided and less registers are used when code is generated. At the end of the patch set all uses of __get_cpu_var have been removed so the macro is removed too. The patch set includes passes over all arches as well. Once these operations are used throughout then specialized macros can be defined in non -x86 arches as well in order to optimize per cpu access by f.e. using a global register that may be set to the per cpu base. Transformations done to __get_cpu_var() 1. Determine the address of the percpu instance of the current processor. DEFINE_PER_CPU(int, y); int *x = &__get_cpu_var(y); Converts to int *x = this_cpu_ptr(&y); 2. Same as #1 but this time an array structure is involved. DEFINE_PER_CPU(int, y[20]); int *x = __get_cpu_var(y); Converts to int *x = this_cpu_ptr(y); 3. Retrieve the content of the current processors instance of a per cpu variable. DEFINE_PER_CPU(int, y); int x = __get_cpu_var(y) Converts to int x = __this_cpu_read(y); 4. Retrieve the content of a percpu struct DEFINE_PER_CPU(struct mystruct, y); struct mystruct x = __get_cpu_var(y); Converts to memcpy(&x, this_cpu_ptr(&y), sizeof(x)); 5. Assignment to a per cpu variable DEFINE_PER_CPU(int, y) __get_cpu_var(y) = x; Converts to this_cpu_write(y, x); 6. Increment/Decrement etc of a per cpu variable DEFINE_PER_CPU(int, y); __get_cpu_var(y)++ Converts to this_cpu_inc(y) Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> CC: linux390@de.ibm.com Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Christoph Lameter <cl@linux.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2014-08-17 17:30:45 +00:00
cpuhw = this_cpu_ptr(&cpu_hw_events);
/* Measurement alerts are shared and might happen when the PMU
* is not reserved. Ignore these alerts in this case. */
if (!(cpuhw->flags & PMU_F_RESERVED))
return;
/* counter authorization change alert */
if (alert & CPU_MF_INT_CF_CACA)
qctri(&cpuhw->info);
/* loss of counter data alert */
if (alert & CPU_MF_INT_CF_LCDA)
pr_err("CPU[%i] Counter data was lost\n", smp_processor_id());
/* loss of MT counter data alert */
if (alert & CPU_MF_INT_CF_MTDA)
pr_warn("CPU[%i] MT counter data was lost\n",
smp_processor_id());
}
#define PMC_INIT 0
#define PMC_RELEASE 1
static void setup_pmc_cpu(void *flags)
{
s390: Replace __get_cpu_var uses __get_cpu_var() is used for multiple purposes in the kernel source. One of them is address calculation via the form &__get_cpu_var(x). This calculates the address for the instance of the percpu variable of the current processor based on an offset. Other use cases are for storing and retrieving data from the current processors percpu area. __get_cpu_var() can be used as an lvalue when writing data or on the right side of an assignment. __get_cpu_var() is defined as : #define __get_cpu_var(var) (*this_cpu_ptr(&(var))) __get_cpu_var() always only does an address determination. However, store and retrieve operations could use a segment prefix (or global register on other platforms) to avoid the address calculation. this_cpu_write() and this_cpu_read() can directly take an offset into a percpu area and use optimized assembly code to read and write per cpu variables. This patch converts __get_cpu_var into either an explicit address calculation using this_cpu_ptr() or into a use of this_cpu operations that use the offset. Thereby address calculations are avoided and less registers are used when code is generated. At the end of the patch set all uses of __get_cpu_var have been removed so the macro is removed too. The patch set includes passes over all arches as well. Once these operations are used throughout then specialized macros can be defined in non -x86 arches as well in order to optimize per cpu access by f.e. using a global register that may be set to the per cpu base. Transformations done to __get_cpu_var() 1. Determine the address of the percpu instance of the current processor. DEFINE_PER_CPU(int, y); int *x = &__get_cpu_var(y); Converts to int *x = this_cpu_ptr(&y); 2. Same as #1 but this time an array structure is involved. DEFINE_PER_CPU(int, y[20]); int *x = __get_cpu_var(y); Converts to int *x = this_cpu_ptr(y); 3. Retrieve the content of the current processors instance of a per cpu variable. DEFINE_PER_CPU(int, y); int x = __get_cpu_var(y) Converts to int x = __this_cpu_read(y); 4. Retrieve the content of a percpu struct DEFINE_PER_CPU(struct mystruct, y); struct mystruct x = __get_cpu_var(y); Converts to memcpy(&x, this_cpu_ptr(&y), sizeof(x)); 5. Assignment to a per cpu variable DEFINE_PER_CPU(int, y) __get_cpu_var(y) = x; Converts to this_cpu_write(y, x); 6. Increment/Decrement etc of a per cpu variable DEFINE_PER_CPU(int, y); __get_cpu_var(y)++ Converts to this_cpu_inc(y) Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> CC: linux390@de.ibm.com Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Christoph Lameter <cl@linux.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2014-08-17 17:30:45 +00:00
struct cpu_hw_events *cpuhw = this_cpu_ptr(&cpu_hw_events);
switch (*((int *) flags)) {
case PMC_INIT:
memset(&cpuhw->info, 0, sizeof(cpuhw->info));
qctri(&cpuhw->info);
cpuhw->flags |= PMU_F_RESERVED;
break;
case PMC_RELEASE:
cpuhw->flags &= ~PMU_F_RESERVED;
break;
}
/* Disable CPU counter sets */
lcctl(0);
}
/* Initialize the CPU-measurement facility */
static int reserve_pmc_hardware(void)
{
int flags = PMC_INIT;
on_each_cpu(setup_pmc_cpu, &flags, 1);
irq_subclass_register(IRQ_SUBCLASS_MEASUREMENT_ALERT);
return 0;
}
/* Release the CPU-measurement facility */
static void release_pmc_hardware(void)
{
int flags = PMC_RELEASE;
on_each_cpu(setup_pmc_cpu, &flags, 1);
irq_subclass_unregister(IRQ_SUBCLASS_MEASUREMENT_ALERT);
}
/* Release the PMU if event is the last perf event */
static void hw_perf_event_destroy(struct perf_event *event)
{
if (!atomic_add_unless(&num_events, -1, 1)) {
mutex_lock(&pmc_reserve_mutex);
if (atomic_dec_return(&num_events) == 0)
release_pmc_hardware();
mutex_unlock(&pmc_reserve_mutex);
}
}
/* CPUMF <-> perf event mappings for kernel+userspace (basic set) */
static const int cpumf_generic_events_basic[] = {
[PERF_COUNT_HW_CPU_CYCLES] = 0,
[PERF_COUNT_HW_INSTRUCTIONS] = 1,
[PERF_COUNT_HW_CACHE_REFERENCES] = -1,
[PERF_COUNT_HW_CACHE_MISSES] = -1,
[PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = -1,
[PERF_COUNT_HW_BRANCH_MISSES] = -1,
[PERF_COUNT_HW_BUS_CYCLES] = -1,
};
/* CPUMF <-> perf event mappings for userspace (problem-state set) */
static const int cpumf_generic_events_user[] = {
[PERF_COUNT_HW_CPU_CYCLES] = 32,
[PERF_COUNT_HW_INSTRUCTIONS] = 33,
[PERF_COUNT_HW_CACHE_REFERENCES] = -1,
[PERF_COUNT_HW_CACHE_MISSES] = -1,
[PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = -1,
[PERF_COUNT_HW_BRANCH_MISSES] = -1,
[PERF_COUNT_HW_BUS_CYCLES] = -1,
};
static int __hw_perf_event_init(struct perf_event *event)
{
struct perf_event_attr *attr = &event->attr;
struct hw_perf_event *hwc = &event->hw;
enum cpumf_ctr_set set;
int err;
u64 ev;
switch (attr->type) {
case PERF_TYPE_RAW:
/* Raw events are used to access counters directly,
* hence do not permit excludes */
if (attr->exclude_kernel || attr->exclude_user ||
attr->exclude_hv)
return -EOPNOTSUPP;
ev = attr->config;
break;
case PERF_TYPE_HARDWARE:
ev = attr->config;
/* Count user space (problem-state) only */
if (!attr->exclude_user && attr->exclude_kernel) {
if (ev >= ARRAY_SIZE(cpumf_generic_events_user))
return -EOPNOTSUPP;
ev = cpumf_generic_events_user[ev];
/* No support for kernel space counters only */
} else if (!attr->exclude_kernel && attr->exclude_user) {
return -EOPNOTSUPP;
/* Count user and kernel space */
} else {
if (ev >= ARRAY_SIZE(cpumf_generic_events_basic))
return -EOPNOTSUPP;
ev = cpumf_generic_events_basic[ev];
}
break;
default:
return -ENOENT;
}
if (ev == -1)
return -ENOENT;
if (ev > PERF_CPUM_CF_MAX_CTR)
return -EINVAL;
/* Obtain the counter set to which the specified counter belongs */
set = get_counter_set(ev);
switch (set) {
case CPUMF_CTR_SET_BASIC:
case CPUMF_CTR_SET_USER:
case CPUMF_CTR_SET_CRYPTO:
case CPUMF_CTR_SET_EXT:
case CPUMF_CTR_SET_MT_DIAG:
/*
* Use the hardware perf event structure to store the
* counter number in the 'config' member and the counter
* set number in the 'config_base'. The counter set number
* is then later used to enable/disable the counter(s).
*/
hwc->config = ev;
hwc->config_base = set;
break;
case CPUMF_CTR_SET_MAX:
/* The counter could not be associated to a counter set */
return -EINVAL;
};
/* Initialize for using the CPU-measurement counter facility */
if (!atomic_inc_not_zero(&num_events)) {
mutex_lock(&pmc_reserve_mutex);
if (atomic_read(&num_events) == 0 && reserve_pmc_hardware())
err = -EBUSY;
else
atomic_inc(&num_events);
mutex_unlock(&pmc_reserve_mutex);
}
event->destroy = hw_perf_event_destroy;
/* Finally, validate version and authorization of the counter set */
err = validate_ctr_auth(hwc);
if (!err)
err = validate_ctr_version(hwc);
return err;
}
static int cpumf_pmu_event_init(struct perf_event *event)
{
int err;
switch (event->attr.type) {
case PERF_TYPE_HARDWARE:
case PERF_TYPE_HW_CACHE:
case PERF_TYPE_RAW:
err = __hw_perf_event_init(event);
break;
default:
return -ENOENT;
}
if (unlikely(err) && event->destroy)
event->destroy(event);
return err;
}
static int hw_perf_event_reset(struct perf_event *event)
{
u64 prev, new;
int err;
do {
prev = local64_read(&event->hw.prev_count);
err = ecctr(event->hw.config, &new);
if (err) {
if (err != 3)
break;
/* The counter is not (yet) available. This
* might happen if the counter set to which
* this counter belongs is in the disabled
* state.
*/
new = 0;
}
} while (local64_cmpxchg(&event->hw.prev_count, prev, new) != prev);
return err;
}
static void hw_perf_event_update(struct perf_event *event)
{
u64 prev, new, delta;
int err;
do {
prev = local64_read(&event->hw.prev_count);
err = ecctr(event->hw.config, &new);
if (err)
return;
} while (local64_cmpxchg(&event->hw.prev_count, prev, new) != prev);
delta = (prev <= new) ? new - prev
: (-1ULL - prev) + new + 1; /* overflow */
local64_add(delta, &event->count);
}
static void cpumf_pmu_read(struct perf_event *event)
{
if (event->hw.state & PERF_HES_STOPPED)
return;
hw_perf_event_update(event);
}
static void cpumf_pmu_start(struct perf_event *event, int flags)
{
s390: Replace __get_cpu_var uses __get_cpu_var() is used for multiple purposes in the kernel source. One of them is address calculation via the form &__get_cpu_var(x). This calculates the address for the instance of the percpu variable of the current processor based on an offset. Other use cases are for storing and retrieving data from the current processors percpu area. __get_cpu_var() can be used as an lvalue when writing data or on the right side of an assignment. __get_cpu_var() is defined as : #define __get_cpu_var(var) (*this_cpu_ptr(&(var))) __get_cpu_var() always only does an address determination. However, store and retrieve operations could use a segment prefix (or global register on other platforms) to avoid the address calculation. this_cpu_write() and this_cpu_read() can directly take an offset into a percpu area and use optimized assembly code to read and write per cpu variables. This patch converts __get_cpu_var into either an explicit address calculation using this_cpu_ptr() or into a use of this_cpu operations that use the offset. Thereby address calculations are avoided and less registers are used when code is generated. At the end of the patch set all uses of __get_cpu_var have been removed so the macro is removed too. The patch set includes passes over all arches as well. Once these operations are used throughout then specialized macros can be defined in non -x86 arches as well in order to optimize per cpu access by f.e. using a global register that may be set to the per cpu base. Transformations done to __get_cpu_var() 1. Determine the address of the percpu instance of the current processor. DEFINE_PER_CPU(int, y); int *x = &__get_cpu_var(y); Converts to int *x = this_cpu_ptr(&y); 2. Same as #1 but this time an array structure is involved. DEFINE_PER_CPU(int, y[20]); int *x = __get_cpu_var(y); Converts to int *x = this_cpu_ptr(y); 3. Retrieve the content of the current processors instance of a per cpu variable. DEFINE_PER_CPU(int, y); int x = __get_cpu_var(y) Converts to int x = __this_cpu_read(y); 4. Retrieve the content of a percpu struct DEFINE_PER_CPU(struct mystruct, y); struct mystruct x = __get_cpu_var(y); Converts to memcpy(&x, this_cpu_ptr(&y), sizeof(x)); 5. Assignment to a per cpu variable DEFINE_PER_CPU(int, y) __get_cpu_var(y) = x; Converts to this_cpu_write(y, x); 6. Increment/Decrement etc of a per cpu variable DEFINE_PER_CPU(int, y); __get_cpu_var(y)++ Converts to this_cpu_inc(y) Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> CC: linux390@de.ibm.com Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Christoph Lameter <cl@linux.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2014-08-17 17:30:45 +00:00
struct cpu_hw_events *cpuhw = this_cpu_ptr(&cpu_hw_events);
struct hw_perf_event *hwc = &event->hw;
if (WARN_ON_ONCE(!(hwc->state & PERF_HES_STOPPED)))
return;
if (WARN_ON_ONCE(hwc->config == -1))
return;
if (flags & PERF_EF_RELOAD)
WARN_ON_ONCE(!(hwc->state & PERF_HES_UPTODATE));
hwc->state = 0;
/* (Re-)enable and activate the counter set */
ctr_set_enable(&cpuhw->state, hwc->config_base);
ctr_set_start(&cpuhw->state, hwc->config_base);
/* The counter set to which this counter belongs can be already active.
* Because all counters in a set are active, the event->hw.prev_count
* needs to be synchronized. At this point, the counter set can be in
* the inactive or disabled state.
*/
hw_perf_event_reset(event);
/* increment refcount for this counter set */
atomic_inc(&cpuhw->ctr_set[hwc->config_base]);
}
static void cpumf_pmu_stop(struct perf_event *event, int flags)
{
s390: Replace __get_cpu_var uses __get_cpu_var() is used for multiple purposes in the kernel source. One of them is address calculation via the form &__get_cpu_var(x). This calculates the address for the instance of the percpu variable of the current processor based on an offset. Other use cases are for storing and retrieving data from the current processors percpu area. __get_cpu_var() can be used as an lvalue when writing data or on the right side of an assignment. __get_cpu_var() is defined as : #define __get_cpu_var(var) (*this_cpu_ptr(&(var))) __get_cpu_var() always only does an address determination. However, store and retrieve operations could use a segment prefix (or global register on other platforms) to avoid the address calculation. this_cpu_write() and this_cpu_read() can directly take an offset into a percpu area and use optimized assembly code to read and write per cpu variables. This patch converts __get_cpu_var into either an explicit address calculation using this_cpu_ptr() or into a use of this_cpu operations that use the offset. Thereby address calculations are avoided and less registers are used when code is generated. At the end of the patch set all uses of __get_cpu_var have been removed so the macro is removed too. The patch set includes passes over all arches as well. Once these operations are used throughout then specialized macros can be defined in non -x86 arches as well in order to optimize per cpu access by f.e. using a global register that may be set to the per cpu base. Transformations done to __get_cpu_var() 1. Determine the address of the percpu instance of the current processor. DEFINE_PER_CPU(int, y); int *x = &__get_cpu_var(y); Converts to int *x = this_cpu_ptr(&y); 2. Same as #1 but this time an array structure is involved. DEFINE_PER_CPU(int, y[20]); int *x = __get_cpu_var(y); Converts to int *x = this_cpu_ptr(y); 3. Retrieve the content of the current processors instance of a per cpu variable. DEFINE_PER_CPU(int, y); int x = __get_cpu_var(y) Converts to int x = __this_cpu_read(y); 4. Retrieve the content of a percpu struct DEFINE_PER_CPU(struct mystruct, y); struct mystruct x = __get_cpu_var(y); Converts to memcpy(&x, this_cpu_ptr(&y), sizeof(x)); 5. Assignment to a per cpu variable DEFINE_PER_CPU(int, y) __get_cpu_var(y) = x; Converts to this_cpu_write(y, x); 6. Increment/Decrement etc of a per cpu variable DEFINE_PER_CPU(int, y); __get_cpu_var(y)++ Converts to this_cpu_inc(y) Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> CC: linux390@de.ibm.com Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Christoph Lameter <cl@linux.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2014-08-17 17:30:45 +00:00
struct cpu_hw_events *cpuhw = this_cpu_ptr(&cpu_hw_events);
struct hw_perf_event *hwc = &event->hw;
if (!(hwc->state & PERF_HES_STOPPED)) {
/* Decrement reference count for this counter set and if this
* is the last used counter in the set, clear activation
* control and set the counter set state to inactive.
*/
if (!atomic_dec_return(&cpuhw->ctr_set[hwc->config_base]))
ctr_set_stop(&cpuhw->state, hwc->config_base);
event->hw.state |= PERF_HES_STOPPED;
}
if ((flags & PERF_EF_UPDATE) && !(hwc->state & PERF_HES_UPTODATE)) {
hw_perf_event_update(event);
event->hw.state |= PERF_HES_UPTODATE;
}
}
static int cpumf_pmu_add(struct perf_event *event, int flags)
{
s390: Replace __get_cpu_var uses __get_cpu_var() is used for multiple purposes in the kernel source. One of them is address calculation via the form &__get_cpu_var(x). This calculates the address for the instance of the percpu variable of the current processor based on an offset. Other use cases are for storing and retrieving data from the current processors percpu area. __get_cpu_var() can be used as an lvalue when writing data or on the right side of an assignment. __get_cpu_var() is defined as : #define __get_cpu_var(var) (*this_cpu_ptr(&(var))) __get_cpu_var() always only does an address determination. However, store and retrieve operations could use a segment prefix (or global register on other platforms) to avoid the address calculation. this_cpu_write() and this_cpu_read() can directly take an offset into a percpu area and use optimized assembly code to read and write per cpu variables. This patch converts __get_cpu_var into either an explicit address calculation using this_cpu_ptr() or into a use of this_cpu operations that use the offset. Thereby address calculations are avoided and less registers are used when code is generated. At the end of the patch set all uses of __get_cpu_var have been removed so the macro is removed too. The patch set includes passes over all arches as well. Once these operations are used throughout then specialized macros can be defined in non -x86 arches as well in order to optimize per cpu access by f.e. using a global register that may be set to the per cpu base. Transformations done to __get_cpu_var() 1. Determine the address of the percpu instance of the current processor. DEFINE_PER_CPU(int, y); int *x = &__get_cpu_var(y); Converts to int *x = this_cpu_ptr(&y); 2. Same as #1 but this time an array structure is involved. DEFINE_PER_CPU(int, y[20]); int *x = __get_cpu_var(y); Converts to int *x = this_cpu_ptr(y); 3. Retrieve the content of the current processors instance of a per cpu variable. DEFINE_PER_CPU(int, y); int x = __get_cpu_var(y) Converts to int x = __this_cpu_read(y); 4. Retrieve the content of a percpu struct DEFINE_PER_CPU(struct mystruct, y); struct mystruct x = __get_cpu_var(y); Converts to memcpy(&x, this_cpu_ptr(&y), sizeof(x)); 5. Assignment to a per cpu variable DEFINE_PER_CPU(int, y) __get_cpu_var(y) = x; Converts to this_cpu_write(y, x); 6. Increment/Decrement etc of a per cpu variable DEFINE_PER_CPU(int, y); __get_cpu_var(y)++ Converts to this_cpu_inc(y) Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> CC: linux390@de.ibm.com Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Christoph Lameter <cl@linux.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2014-08-17 17:30:45 +00:00
struct cpu_hw_events *cpuhw = this_cpu_ptr(&cpu_hw_events);
/* Check authorization for the counter set to which this
* counter belongs.
* For group events transaction, the authorization check is
* done in cpumf_pmu_commit_txn().
*/
if (!(cpuhw->txn_flags & PERF_PMU_TXN_ADD))
if (validate_ctr_auth(&event->hw))
return -ENOENT;
ctr_set_enable(&cpuhw->state, event->hw.config_base);
event->hw.state = PERF_HES_UPTODATE | PERF_HES_STOPPED;
if (flags & PERF_EF_START)
cpumf_pmu_start(event, PERF_EF_RELOAD);
perf_event_update_userpage(event);
return 0;
}
static void cpumf_pmu_del(struct perf_event *event, int flags)
{
s390: Replace __get_cpu_var uses __get_cpu_var() is used for multiple purposes in the kernel source. One of them is address calculation via the form &__get_cpu_var(x). This calculates the address for the instance of the percpu variable of the current processor based on an offset. Other use cases are for storing and retrieving data from the current processors percpu area. __get_cpu_var() can be used as an lvalue when writing data or on the right side of an assignment. __get_cpu_var() is defined as : #define __get_cpu_var(var) (*this_cpu_ptr(&(var))) __get_cpu_var() always only does an address determination. However, store and retrieve operations could use a segment prefix (or global register on other platforms) to avoid the address calculation. this_cpu_write() and this_cpu_read() can directly take an offset into a percpu area and use optimized assembly code to read and write per cpu variables. This patch converts __get_cpu_var into either an explicit address calculation using this_cpu_ptr() or into a use of this_cpu operations that use the offset. Thereby address calculations are avoided and less registers are used when code is generated. At the end of the patch set all uses of __get_cpu_var have been removed so the macro is removed too. The patch set includes passes over all arches as well. Once these operations are used throughout then specialized macros can be defined in non -x86 arches as well in order to optimize per cpu access by f.e. using a global register that may be set to the per cpu base. Transformations done to __get_cpu_var() 1. Determine the address of the percpu instance of the current processor. DEFINE_PER_CPU(int, y); int *x = &__get_cpu_var(y); Converts to int *x = this_cpu_ptr(&y); 2. Same as #1 but this time an array structure is involved. DEFINE_PER_CPU(int, y[20]); int *x = __get_cpu_var(y); Converts to int *x = this_cpu_ptr(y); 3. Retrieve the content of the current processors instance of a per cpu variable. DEFINE_PER_CPU(int, y); int x = __get_cpu_var(y) Converts to int x = __this_cpu_read(y); 4. Retrieve the content of a percpu struct DEFINE_PER_CPU(struct mystruct, y); struct mystruct x = __get_cpu_var(y); Converts to memcpy(&x, this_cpu_ptr(&y), sizeof(x)); 5. Assignment to a per cpu variable DEFINE_PER_CPU(int, y) __get_cpu_var(y) = x; Converts to this_cpu_write(y, x); 6. Increment/Decrement etc of a per cpu variable DEFINE_PER_CPU(int, y); __get_cpu_var(y)++ Converts to this_cpu_inc(y) Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> CC: linux390@de.ibm.com Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Christoph Lameter <cl@linux.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2014-08-17 17:30:45 +00:00
struct cpu_hw_events *cpuhw = this_cpu_ptr(&cpu_hw_events);
cpumf_pmu_stop(event, PERF_EF_UPDATE);
/* Check if any counter in the counter set is still used. If not used,
* change the counter set to the disabled state. This also clears the
* content of all counters in the set.
*
* When a new perf event has been added but not yet started, this can
* clear enable control and resets all counters in a set. Therefore,
* cpumf_pmu_start() always has to reenable a counter set.
*/
if (!atomic_read(&cpuhw->ctr_set[event->hw.config_base]))
ctr_set_disable(&cpuhw->state, event->hw.config_base);
perf_event_update_userpage(event);
}
/*
* Start group events scheduling transaction.
* Set flags to perform a single test at commit time.
2015-09-04 03:07:45 +00:00
*
* We only support PERF_PMU_TXN_ADD transactions. Save the
* transaction flags but otherwise ignore non-PERF_PMU_TXN_ADD
* transactions.
*/
2015-09-04 03:07:45 +00:00
static void cpumf_pmu_start_txn(struct pmu *pmu, unsigned int txn_flags)
{
s390: Replace __get_cpu_var uses __get_cpu_var() is used for multiple purposes in the kernel source. One of them is address calculation via the form &__get_cpu_var(x). This calculates the address for the instance of the percpu variable of the current processor based on an offset. Other use cases are for storing and retrieving data from the current processors percpu area. __get_cpu_var() can be used as an lvalue when writing data or on the right side of an assignment. __get_cpu_var() is defined as : #define __get_cpu_var(var) (*this_cpu_ptr(&(var))) __get_cpu_var() always only does an address determination. However, store and retrieve operations could use a segment prefix (or global register on other platforms) to avoid the address calculation. this_cpu_write() and this_cpu_read() can directly take an offset into a percpu area and use optimized assembly code to read and write per cpu variables. This patch converts __get_cpu_var into either an explicit address calculation using this_cpu_ptr() or into a use of this_cpu operations that use the offset. Thereby address calculations are avoided and less registers are used when code is generated. At the end of the patch set all uses of __get_cpu_var have been removed so the macro is removed too. The patch set includes passes over all arches as well. Once these operations are used throughout then specialized macros can be defined in non -x86 arches as well in order to optimize per cpu access by f.e. using a global register that may be set to the per cpu base. Transformations done to __get_cpu_var() 1. Determine the address of the percpu instance of the current processor. DEFINE_PER_CPU(int, y); int *x = &__get_cpu_var(y); Converts to int *x = this_cpu_ptr(&y); 2. Same as #1 but this time an array structure is involved. DEFINE_PER_CPU(int, y[20]); int *x = __get_cpu_var(y); Converts to int *x = this_cpu_ptr(y); 3. Retrieve the content of the current processors instance of a per cpu variable. DEFINE_PER_CPU(int, y); int x = __get_cpu_var(y) Converts to int x = __this_cpu_read(y); 4. Retrieve the content of a percpu struct DEFINE_PER_CPU(struct mystruct, y); struct mystruct x = __get_cpu_var(y); Converts to memcpy(&x, this_cpu_ptr(&y), sizeof(x)); 5. Assignment to a per cpu variable DEFINE_PER_CPU(int, y) __get_cpu_var(y) = x; Converts to this_cpu_write(y, x); 6. Increment/Decrement etc of a per cpu variable DEFINE_PER_CPU(int, y); __get_cpu_var(y)++ Converts to this_cpu_inc(y) Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> CC: linux390@de.ibm.com Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Christoph Lameter <cl@linux.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2014-08-17 17:30:45 +00:00
struct cpu_hw_events *cpuhw = this_cpu_ptr(&cpu_hw_events);
2015-09-04 03:07:45 +00:00
WARN_ON_ONCE(cpuhw->txn_flags); /* txn already in flight */
cpuhw->txn_flags = txn_flags;
if (txn_flags & ~PERF_PMU_TXN_ADD)
return;
perf_pmu_disable(pmu);
cpuhw->tx_state = cpuhw->state;
}
/*
* Stop and cancel a group events scheduling tranctions.
* Assumes cpumf_pmu_del() is called for each successful added
* cpumf_pmu_add() during the transaction.
*/
static void cpumf_pmu_cancel_txn(struct pmu *pmu)
{
2015-09-04 03:07:45 +00:00
unsigned int txn_flags;
s390: Replace __get_cpu_var uses __get_cpu_var() is used for multiple purposes in the kernel source. One of them is address calculation via the form &__get_cpu_var(x). This calculates the address for the instance of the percpu variable of the current processor based on an offset. Other use cases are for storing and retrieving data from the current processors percpu area. __get_cpu_var() can be used as an lvalue when writing data or on the right side of an assignment. __get_cpu_var() is defined as : #define __get_cpu_var(var) (*this_cpu_ptr(&(var))) __get_cpu_var() always only does an address determination. However, store and retrieve operations could use a segment prefix (or global register on other platforms) to avoid the address calculation. this_cpu_write() and this_cpu_read() can directly take an offset into a percpu area and use optimized assembly code to read and write per cpu variables. This patch converts __get_cpu_var into either an explicit address calculation using this_cpu_ptr() or into a use of this_cpu operations that use the offset. Thereby address calculations are avoided and less registers are used when code is generated. At the end of the patch set all uses of __get_cpu_var have been removed so the macro is removed too. The patch set includes passes over all arches as well. Once these operations are used throughout then specialized macros can be defined in non -x86 arches as well in order to optimize per cpu access by f.e. using a global register that may be set to the per cpu base. Transformations done to __get_cpu_var() 1. Determine the address of the percpu instance of the current processor. DEFINE_PER_CPU(int, y); int *x = &__get_cpu_var(y); Converts to int *x = this_cpu_ptr(&y); 2. Same as #1 but this time an array structure is involved. DEFINE_PER_CPU(int, y[20]); int *x = __get_cpu_var(y); Converts to int *x = this_cpu_ptr(y); 3. Retrieve the content of the current processors instance of a per cpu variable. DEFINE_PER_CPU(int, y); int x = __get_cpu_var(y) Converts to int x = __this_cpu_read(y); 4. Retrieve the content of a percpu struct DEFINE_PER_CPU(struct mystruct, y); struct mystruct x = __get_cpu_var(y); Converts to memcpy(&x, this_cpu_ptr(&y), sizeof(x)); 5. Assignment to a per cpu variable DEFINE_PER_CPU(int, y) __get_cpu_var(y) = x; Converts to this_cpu_write(y, x); 6. Increment/Decrement etc of a per cpu variable DEFINE_PER_CPU(int, y); __get_cpu_var(y)++ Converts to this_cpu_inc(y) Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> CC: linux390@de.ibm.com Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Christoph Lameter <cl@linux.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2014-08-17 17:30:45 +00:00
struct cpu_hw_events *cpuhw = this_cpu_ptr(&cpu_hw_events);
2015-09-04 03:07:45 +00:00
WARN_ON_ONCE(!cpuhw->txn_flags); /* no txn in flight */
txn_flags = cpuhw->txn_flags;
cpuhw->txn_flags = 0;
if (txn_flags & ~PERF_PMU_TXN_ADD)
return;
WARN_ON(cpuhw->tx_state != cpuhw->state);
perf_pmu_enable(pmu);
}
/*
* Commit the group events scheduling transaction. On success, the
* transaction is closed. On error, the transaction is kept open
* until cpumf_pmu_cancel_txn() is called.
*/
static int cpumf_pmu_commit_txn(struct pmu *pmu)
{
s390: Replace __get_cpu_var uses __get_cpu_var() is used for multiple purposes in the kernel source. One of them is address calculation via the form &__get_cpu_var(x). This calculates the address for the instance of the percpu variable of the current processor based on an offset. Other use cases are for storing and retrieving data from the current processors percpu area. __get_cpu_var() can be used as an lvalue when writing data or on the right side of an assignment. __get_cpu_var() is defined as : #define __get_cpu_var(var) (*this_cpu_ptr(&(var))) __get_cpu_var() always only does an address determination. However, store and retrieve operations could use a segment prefix (or global register on other platforms) to avoid the address calculation. this_cpu_write() and this_cpu_read() can directly take an offset into a percpu area and use optimized assembly code to read and write per cpu variables. This patch converts __get_cpu_var into either an explicit address calculation using this_cpu_ptr() or into a use of this_cpu operations that use the offset. Thereby address calculations are avoided and less registers are used when code is generated. At the end of the patch set all uses of __get_cpu_var have been removed so the macro is removed too. The patch set includes passes over all arches as well. Once these operations are used throughout then specialized macros can be defined in non -x86 arches as well in order to optimize per cpu access by f.e. using a global register that may be set to the per cpu base. Transformations done to __get_cpu_var() 1. Determine the address of the percpu instance of the current processor. DEFINE_PER_CPU(int, y); int *x = &__get_cpu_var(y); Converts to int *x = this_cpu_ptr(&y); 2. Same as #1 but this time an array structure is involved. DEFINE_PER_CPU(int, y[20]); int *x = __get_cpu_var(y); Converts to int *x = this_cpu_ptr(y); 3. Retrieve the content of the current processors instance of a per cpu variable. DEFINE_PER_CPU(int, y); int x = __get_cpu_var(y) Converts to int x = __this_cpu_read(y); 4. Retrieve the content of a percpu struct DEFINE_PER_CPU(struct mystruct, y); struct mystruct x = __get_cpu_var(y); Converts to memcpy(&x, this_cpu_ptr(&y), sizeof(x)); 5. Assignment to a per cpu variable DEFINE_PER_CPU(int, y) __get_cpu_var(y) = x; Converts to this_cpu_write(y, x); 6. Increment/Decrement etc of a per cpu variable DEFINE_PER_CPU(int, y); __get_cpu_var(y)++ Converts to this_cpu_inc(y) Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> CC: linux390@de.ibm.com Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Christoph Lameter <cl@linux.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2014-08-17 17:30:45 +00:00
struct cpu_hw_events *cpuhw = this_cpu_ptr(&cpu_hw_events);
u64 state;
2015-09-04 03:07:45 +00:00
WARN_ON_ONCE(!cpuhw->txn_flags); /* no txn in flight */
if (cpuhw->txn_flags & ~PERF_PMU_TXN_ADD) {
cpuhw->txn_flags = 0;
return 0;
}
/* check if the updated state can be scheduled */
state = cpuhw->state & ~((1 << CPUMF_LCCTL_ENABLE_SHIFT) - 1);
state >>= CPUMF_LCCTL_ENABLE_SHIFT;
if ((state & cpuhw->info.auth_ctl) != state)
return -ENOENT;
2015-09-04 03:07:45 +00:00
cpuhw->txn_flags = 0;
perf_pmu_enable(pmu);
return 0;
}
/* Performance monitoring unit for s390x */
static struct pmu cpumf_pmu = {
s390/cpum_cf: use perf software context for hardware counters On s390, there are two different hardware PMUs for counting and sampling. Previously, both PMUs have shared the perf_hw_context which is not correct and, recently, results in this warning: ------------[ cut here ]------------ WARNING: CPU: 5 PID: 1 at kernel/events/core.c:8485 perf_pmu_register+0x420/0x428 Modules linked in: CPU: 5 PID: 1 Comm: swapper/0 Not tainted 4.7.0-rc1+ #2 task: 00000009c5240000 ti: 00000009c5234000 task.ti: 00000009c5234000 Krnl PSW : 0704c00180000000 0000000000220c50 (perf_pmu_register+0x420/0x428) R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:0 AS:3 CC:0 PM:0 RI:0 EA:3 Krnl GPRS: ffffffffffffffff 0000000000b15ac6 0000000000000000 00000009cb440000 000000000022087a 0000000000000000 0000000000b78fa0 0000000000000000 0000000000a9aa90 0000000000000084 0000000000000005 000000000088a97a 0000000000000004 0000000000749dd0 000000000022087a 00000009c5237cc0 Krnl Code: 0000000000220c44: a7f4ff54 brc 15,220aec 0000000000220c48: 92011000 mvi 0(%r1),1 #0000000000220c4c: a7f40001 brc 15,220c4e >0000000000220c50: a7f4ff12 brc 15,220a74 0000000000220c54: 0707 bcr 0,%r7 0000000000220c56: 0707 bcr 0,%r7 0000000000220c58: ebdff0800024 stmg %r13,%r15,128(%r15) 0000000000220c5e: a7f13fe0 tmll %r15,16352 Call Trace: ([<000000000022087a>] perf_pmu_register+0x4a/0x428) ([<0000000000b2c25c>] init_cpum_sampling_pmu+0x14c/0x1f8) ([<0000000000100248>] do_one_initcall+0x48/0x140) ([<0000000000b25d26>] kernel_init_freeable+0x1e6/0x2a0) ([<000000000072bda4>] kernel_init+0x24/0x138) ([<000000000073495e>] kernel_thread_starter+0x6/0xc) ([<0000000000734958>] kernel_thread_starter+0x0/0xc) Last Breaking-Event-Address: [<0000000000220c4c>] perf_pmu_register+0x41c/0x428 ---[ end trace 0c6ef9f5b771ad97 ]--- Using the perf_sw_context is an option because the cpum_cf PMU does not use interrupts. To make this more clear, initialize the capabilities in the PMU structure. Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Suggested-by: Peter Zijlstra <peterz@infradead.org> Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2016-06-09 10:28:13 +00:00
.task_ctx_nr = perf_sw_context,
.capabilities = PERF_PMU_CAP_NO_INTERRUPT,
.pmu_enable = cpumf_pmu_enable,
.pmu_disable = cpumf_pmu_disable,
.event_init = cpumf_pmu_event_init,
.add = cpumf_pmu_add,
.del = cpumf_pmu_del,
.start = cpumf_pmu_start,
.stop = cpumf_pmu_stop,
.read = cpumf_pmu_read,
.start_txn = cpumf_pmu_start_txn,
.commit_txn = cpumf_pmu_commit_txn,
.cancel_txn = cpumf_pmu_cancel_txn,
};
static int cpumf_pmf_setup(unsigned int cpu, int flags)
{
local_irq_disable();
setup_pmc_cpu(&flags);
local_irq_enable();
return 0;
}
static int s390_pmu_online_cpu(unsigned int cpu)
{
return cpumf_pmf_setup(cpu, PMC_INIT);
}
static int s390_pmu_offline_cpu(unsigned int cpu)
{
return cpumf_pmf_setup(cpu, PMC_RELEASE);
}
static int __init cpumf_pmu_init(void)
{
int rc;
if (!cpum_cf_avail())
return -ENODEV;
/* clear bit 15 of cr0 to unauthorize problem-state to
* extract measurement counters */
ctl_clear_bit(0, 48);
/* register handler for measurement-alert interruptions */
rc = register_external_irq(EXT_IRQ_MEASURE_ALERT,
cpumf_measurement_alert);
if (rc) {
pr_err("Registering for CPU-measurement alerts "
"failed with rc=%i\n", rc);
return rc;
}
cpumf_pmu.attr_groups = cpumf_cf_event_group();
rc = perf_pmu_register(&cpumf_pmu, "cpum_cf", PERF_TYPE_RAW);
if (rc) {
pr_err("Registering the cpum_cf PMU failed with rc=%i\n", rc);
unregister_external_irq(EXT_IRQ_MEASURE_ALERT,
cpumf_measurement_alert);
return rc;
}
return cpuhp_setup_state(CPUHP_AP_PERF_S390_CF_ONLINE,
"perf/s390/cf:online",
s390_pmu_online_cpu, s390_pmu_offline_cpu);
}
early_initcall(cpumf_pmu_init);