linux/arch/x86/mm/mmap.c

264 lines
7.6 KiB
C
Raw Normal View History

/*
* Flexible mmap layout support
*
* Based on code by Ingo Molnar and Andi Kleen, copyrighted
* as follows:
*
* Copyright 2003-2009 Red Hat Inc.
* All Rights Reserved.
* Copyright 2005 Andi Kleen, SUSE Labs.
* Copyright 2007 Jiri Kosina, SUSE Labs.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/personality.h>
#include <linux/mm.h>
#include <linux/random.h>
#include <linux/limits.h>
#include <linux/sched/signal.h>
#include <linux/sched/mm.h>
#include <linux/compat.h>
#include <asm/elf.h>
x86/mm: Limit mmap() of /dev/mem to valid physical addresses One thing /dev/mem access APIs should verify is that there's no way that excessively large pfn's can leak into the high bits of the page table entry. In particular, if people can use "very large physical page addresses" through /dev/mem to set the bits past bit 58 - SOFTW4 and permission key bits and NX bit, that could *really* confuse the kernel. We had an earlier attempt: ce56a86e2ade ("x86/mm: Limit mmap() of /dev/mem to valid physical addresses") ... which turned out to be too restrictive (breaking mem=... bootups for example) and had to be reverted in: 90edaac62729 ("Revert "x86/mm: Limit mmap() of /dev/mem to valid physical addresses"") This v2 attempt modifies the original patch and makes sure that mmap(/dev/mem) limits the pfns so that it at least fits in the actual pteval_t architecturally: - Make sure mmap_mem() actually validates that the offset fits in phys_addr_t ( This may be indirectly true due to some other check, but it's not entirely obvious. ) - Change valid_mmap_phys_addr_range() to just use phys_addr_valid() on the top byte ( Top byte is sufficient, because mmap_mem() has already checked that it cannot wrap. ) - Add a few comments about what the valid_phys_addr_range() vs. valid_mmap_phys_addr_range() difference is. Signed-off-by: Craig Bergstrom <craigb@google.com> [ Fixed the checks and added comments. ] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> [ Collected the discussion and patches into a commit. ] Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Fengguang Wu <fengguang.wu@intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Hans Verkuil <hans.verkuil@cisco.com> Cc: Mauro Carvalho Chehab <mchehab@s-opensource.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sander Eikelenboom <linux@eikelenboom.it> Cc: Sean Young <sean@mess.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/CA+55aFyEcOMb657vWSmrM13OxmHxC-XxeBmNis=DwVvpJUOogQ@mail.gmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-11-15 22:29:51 +00:00
#include "physaddr.h"
struct va_alignment __read_mostly va_align = {
.flags = -1,
};
unsigned long task_size_32bit(void)
{
return IA32_PAGE_OFFSET;
}
x86/mm: Prepare to expose larger address space to userspace On x86, 5-level paging enables 56-bit userspace virtual address space. Not all user space is ready to handle wide addresses. It's known that at least some JIT compilers use higher bits in pointers to encode their information. It collides with valid pointers with 5-level paging and leads to crashes. To mitigate this, we are not going to allocate virtual address space above 47-bit by default. But userspace can ask for allocation from full address space by specifying hint address (with or without MAP_FIXED) above 47-bits. If hint address set above 47-bit, but MAP_FIXED is not specified, we try to look for unmapped area by specified address. If it's already occupied, we look for unmapped area in *full* address space, rather than from 47-bit window. A high hint address would only affect the allocation in question, but not any future mmap()s. Specifying high hint address on older kernel or on machine without 5-level paging support is safe. The hint will be ignored and kernel will fall back to allocation from 47-bit address space. This approach helps to easily make application's memory allocator aware about large address space without manually tracking allocated virtual address space. The patch puts all machinery in place, but not yet allows userspace to have mappings above 47-bit -- TASK_SIZE_MAX has to be raised to get the effect. Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-arch@vger.kernel.org Cc: linux-mm@kvack.org Link: http://lkml.kernel.org/r/20170716225954.74185-7-kirill.shutemov@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-07-16 22:59:52 +00:00
unsigned long task_size_64bit(int full_addr_space)
x86/mm: Introduce mmap_compat_base() for 32-bit mmap() mmap() uses a base address, from which it starts to look for a free space for allocation. The base address is stored in mm->mmap_base, which is calculated during exec(). The address depends on task's size, set rlimit for stack, ASLR randomization. The base depends on the task size and the number of random bits which are different for 64-bit and 32bit applications. Due to the fact, that the base address is fixed, its mmap() from a compat (32bit) syscall issued by a 64bit task will return a address which is based on the 64bit base address and does not fit into the 32bit address space (4GB). The returned pointer is truncated to 32bit, which results in an invalid address. To solve store a seperate compat address base plus a compat legacy address base in mm_struct. These bases are calculated at exec() time and can be used later to address the 32bit compat mmap() issued by 64 bit applications. As a consequence of this change 32-bit applications issuing a 64-bit syscall (after doing a long jump) will get a 64-bit mapping now. Before this change 32-bit applications always got a 32bit mapping. [ tglx: Massaged changelog and added a comment ] Signed-off-by: Dmitry Safonov <dsafonov@virtuozzo.com> Cc: 0x7f454c46@gmail.com Cc: linux-mm@kvack.org Cc: Andy Lutomirski <luto@kernel.org> Cc: Cyrill Gorcunov <gorcunov@openvz.org> Cc: Borislav Petkov <bp@suse.de> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Link: http://lkml.kernel.org/r/20170306141721.9188-4-dsafonov@virtuozzo.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2017-03-06 14:17:19 +00:00
{
x86/mm: Prepare to expose larger address space to userspace On x86, 5-level paging enables 56-bit userspace virtual address space. Not all user space is ready to handle wide addresses. It's known that at least some JIT compilers use higher bits in pointers to encode their information. It collides with valid pointers with 5-level paging and leads to crashes. To mitigate this, we are not going to allocate virtual address space above 47-bit by default. But userspace can ask for allocation from full address space by specifying hint address (with or without MAP_FIXED) above 47-bits. If hint address set above 47-bit, but MAP_FIXED is not specified, we try to look for unmapped area by specified address. If it's already occupied, we look for unmapped area in *full* address space, rather than from 47-bit window. A high hint address would only affect the allocation in question, but not any future mmap()s. Specifying high hint address on older kernel or on machine without 5-level paging support is safe. The hint will be ignored and kernel will fall back to allocation from 47-bit address space. This approach helps to easily make application's memory allocator aware about large address space without manually tracking allocated virtual address space. The patch puts all machinery in place, but not yet allows userspace to have mappings above 47-bit -- TASK_SIZE_MAX has to be raised to get the effect. Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-arch@vger.kernel.org Cc: linux-mm@kvack.org Link: http://lkml.kernel.org/r/20170716225954.74185-7-kirill.shutemov@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-07-16 22:59:52 +00:00
return full_addr_space ? TASK_SIZE_MAX : DEFAULT_MAP_WINDOW;
x86/mm: Introduce mmap_compat_base() for 32-bit mmap() mmap() uses a base address, from which it starts to look for a free space for allocation. The base address is stored in mm->mmap_base, which is calculated during exec(). The address depends on task's size, set rlimit for stack, ASLR randomization. The base depends on the task size and the number of random bits which are different for 64-bit and 32bit applications. Due to the fact, that the base address is fixed, its mmap() from a compat (32bit) syscall issued by a 64bit task will return a address which is based on the 64bit base address and does not fit into the 32bit address space (4GB). The returned pointer is truncated to 32bit, which results in an invalid address. To solve store a seperate compat address base plus a compat legacy address base in mm_struct. These bases are calculated at exec() time and can be used later to address the 32bit compat mmap() issued by 64 bit applications. As a consequence of this change 32-bit applications issuing a 64-bit syscall (after doing a long jump) will get a 64-bit mapping now. Before this change 32-bit applications always got a 32bit mapping. [ tglx: Massaged changelog and added a comment ] Signed-off-by: Dmitry Safonov <dsafonov@virtuozzo.com> Cc: 0x7f454c46@gmail.com Cc: linux-mm@kvack.org Cc: Andy Lutomirski <luto@kernel.org> Cc: Cyrill Gorcunov <gorcunov@openvz.org> Cc: Borislav Petkov <bp@suse.de> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Link: http://lkml.kernel.org/r/20170306141721.9188-4-dsafonov@virtuozzo.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2017-03-06 14:17:19 +00:00
}
static unsigned long stack_maxrandom_size(unsigned long task_size)
{
x86, mm/ASLR: Fix stack randomization on 64-bit systems The issue is that the stack for processes is not properly randomized on 64 bit architectures due to an integer overflow. The affected function is randomize_stack_top() in file "fs/binfmt_elf.c": static unsigned long randomize_stack_top(unsigned long stack_top) { unsigned int random_variable = 0; if ((current->flags & PF_RANDOMIZE) && !(current->personality & ADDR_NO_RANDOMIZE)) { random_variable = get_random_int() & STACK_RND_MASK; random_variable <<= PAGE_SHIFT; } return PAGE_ALIGN(stack_top) + random_variable; return PAGE_ALIGN(stack_top) - random_variable; } Note that, it declares the "random_variable" variable as "unsigned int". Since the result of the shifting operation between STACK_RND_MASK (which is 0x3fffff on x86_64, 22 bits) and PAGE_SHIFT (which is 12 on x86_64): random_variable <<= PAGE_SHIFT; then the two leftmost bits are dropped when storing the result in the "random_variable". This variable shall be at least 34 bits long to hold the (22+12) result. These two dropped bits have an impact on the entropy of process stack. Concretely, the total stack entropy is reduced by four: from 2^28 to 2^30 (One fourth of expected entropy). This patch restores back the entropy by correcting the types involved in the operations in the functions randomize_stack_top() and stack_maxrandom_size(). The successful fix can be tested with: $ for i in `seq 1 10`; do cat /proc/self/maps | grep stack; done 7ffeda566000-7ffeda587000 rw-p 00000000 00:00 0 [stack] 7fff5a332000-7fff5a353000 rw-p 00000000 00:00 0 [stack] 7ffcdb7a1000-7ffcdb7c2000 rw-p 00000000 00:00 0 [stack] 7ffd5e2c4000-7ffd5e2e5000 rw-p 00000000 00:00 0 [stack] ... Once corrected, the leading bytes should be between 7ffc and 7fff, rather than always being 7fff. Signed-off-by: Hector Marco-Gisbert <hecmargi@upv.es> Signed-off-by: Ismael Ripoll <iripoll@upv.es> [ Rebased, fixed 80 char bugs, cleaned up commit message, added test example and CVE ] Signed-off-by: Kees Cook <keescook@chromium.org> Cc: <stable@vger.kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Fixes: CVE-2015-1593 Link: http://lkml.kernel.org/r/20150214173350.GA18393@www.outflux.net Signed-off-by: Borislav Petkov <bp@suse.de>
2015-02-14 17:33:50 +00:00
unsigned long max = 0;
if (current->flags & PF_RANDOMIZE) {
max = (-1UL) & __STACK_RND_MASK(task_size == task_size_32bit());
max <<= PAGE_SHIFT;
}
return max;
}
#ifdef CONFIG_COMPAT
# define mmap32_rnd_bits mmap_rnd_compat_bits
# define mmap64_rnd_bits mmap_rnd_bits
#else
# define mmap32_rnd_bits mmap_rnd_bits
# define mmap64_rnd_bits mmap_rnd_bits
#endif
#define SIZE_128M (128 * 1024 * 1024UL)
static int mmap_is_legacy(void)
{
if (current->personality & ADDR_COMPAT_LAYOUT)
return 1;
return sysctl_legacy_va_layout;
}
static unsigned long arch_rnd(unsigned int rndbits)
{
if (!(current->flags & PF_RANDOMIZE))
return 0;
return (get_random_long() & ((1UL << rndbits) - 1)) << PAGE_SHIFT;
}
unsigned long arch_mmap_rnd(void)
{
return arch_rnd(mmap_is_ia32() ? mmap32_rnd_bits : mmap64_rnd_bits);
}
exec: pass stack rlimit into mm layout functions Patch series "exec: Pin stack limit during exec". Attempts to solve problems with the stack limit changing during exec continue to be frustrated[1][2]. In addition to the specific issues around the Stack Clash family of flaws, Andy Lutomirski pointed out[3] other places during exec where the stack limit is used and is assumed to be unchanging. Given the many places it gets used and the fact that it can be manipulated/raced via setrlimit() and prlimit(), I think the only way to handle this is to move away from the "current" view of the stack limit and instead attach it to the bprm, and plumb this down into the functions that need to know the stack limits. This series implements the approach. [1] 04e35f4495dd ("exec: avoid RLIMIT_STACK races with prlimit()") [2] 779f4e1c6c7c ("Revert "exec: avoid RLIMIT_STACK races with prlimit()"") [3] to security@kernel.org, "Subject: existing rlimit races?" This patch (of 3): Since it is possible that the stack rlimit can change externally during exec (either via another thread calling setrlimit() or another process calling prlimit()), provide a way to pass the rlimit down into the per-architecture mm layout functions so that the rlimit can stay in the bprm structure instead of sitting in the signal structure until exec is finalized. Link: http://lkml.kernel.org/r/1518638796-20819-2-git-send-email-keescook@chromium.org Signed-off-by: Kees Cook <keescook@chromium.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Ben Hutchings <ben@decadent.org.uk> Cc: Willy Tarreau <w@1wt.eu> Cc: Hugh Dickins <hughd@google.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: "Jason A. Donenfeld" <Jason@zx2c4.com> Cc: Rik van Riel <riel@redhat.com> Cc: Laura Abbott <labbott@redhat.com> Cc: Greg KH <greg@kroah.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Ben Hutchings <ben.hutchings@codethink.co.uk> Cc: Brad Spengler <spender@grsecurity.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-04-10 23:34:53 +00:00
static unsigned long mmap_base(unsigned long rnd, unsigned long task_size,
struct rlimit *rlim_stack)
{
exec: pass stack rlimit into mm layout functions Patch series "exec: Pin stack limit during exec". Attempts to solve problems with the stack limit changing during exec continue to be frustrated[1][2]. In addition to the specific issues around the Stack Clash family of flaws, Andy Lutomirski pointed out[3] other places during exec where the stack limit is used and is assumed to be unchanging. Given the many places it gets used and the fact that it can be manipulated/raced via setrlimit() and prlimit(), I think the only way to handle this is to move away from the "current" view of the stack limit and instead attach it to the bprm, and plumb this down into the functions that need to know the stack limits. This series implements the approach. [1] 04e35f4495dd ("exec: avoid RLIMIT_STACK races with prlimit()") [2] 779f4e1c6c7c ("Revert "exec: avoid RLIMIT_STACK races with prlimit()"") [3] to security@kernel.org, "Subject: existing rlimit races?" This patch (of 3): Since it is possible that the stack rlimit can change externally during exec (either via another thread calling setrlimit() or another process calling prlimit()), provide a way to pass the rlimit down into the per-architecture mm layout functions so that the rlimit can stay in the bprm structure instead of sitting in the signal structure until exec is finalized. Link: http://lkml.kernel.org/r/1518638796-20819-2-git-send-email-keescook@chromium.org Signed-off-by: Kees Cook <keescook@chromium.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Ben Hutchings <ben@decadent.org.uk> Cc: Willy Tarreau <w@1wt.eu> Cc: Hugh Dickins <hughd@google.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: "Jason A. Donenfeld" <Jason@zx2c4.com> Cc: Rik van Riel <riel@redhat.com> Cc: Laura Abbott <labbott@redhat.com> Cc: Greg KH <greg@kroah.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Ben Hutchings <ben.hutchings@codethink.co.uk> Cc: Brad Spengler <spender@grsecurity.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-04-10 23:34:53 +00:00
unsigned long gap = rlim_stack->rlim_cur;
unsigned long pad = stack_maxrandom_size(task_size) + stack_guard_gap;
unsigned long gap_min, gap_max;
/* Values close to RLIM_INFINITY can overflow. */
if (gap + pad > gap)
gap += pad;
/*
* Top of mmap area (just below the process stack).
* Leave an at least ~128 MB hole with possible stack randomization.
*/
gap_min = SIZE_128M;
gap_max = (task_size / 6) * 5;
if (gap < gap_min)
gap = gap_min;
else if (gap > gap_max)
gap = gap_max;
return PAGE_ALIGN(task_size - gap - rnd);
}
static unsigned long mmap_legacy_base(unsigned long rnd,
unsigned long task_size)
{
return __TASK_UNMAPPED_BASE(task_size) + rnd;
}
/*
* This function, called very early during the creation of a new
* process VM image, sets up which VM layout function to use:
*/
x86/mm: Introduce mmap_compat_base() for 32-bit mmap() mmap() uses a base address, from which it starts to look for a free space for allocation. The base address is stored in mm->mmap_base, which is calculated during exec(). The address depends on task's size, set rlimit for stack, ASLR randomization. The base depends on the task size and the number of random bits which are different for 64-bit and 32bit applications. Due to the fact, that the base address is fixed, its mmap() from a compat (32bit) syscall issued by a 64bit task will return a address which is based on the 64bit base address and does not fit into the 32bit address space (4GB). The returned pointer is truncated to 32bit, which results in an invalid address. To solve store a seperate compat address base plus a compat legacy address base in mm_struct. These bases are calculated at exec() time and can be used later to address the 32bit compat mmap() issued by 64 bit applications. As a consequence of this change 32-bit applications issuing a 64-bit syscall (after doing a long jump) will get a 64-bit mapping now. Before this change 32-bit applications always got a 32bit mapping. [ tglx: Massaged changelog and added a comment ] Signed-off-by: Dmitry Safonov <dsafonov@virtuozzo.com> Cc: 0x7f454c46@gmail.com Cc: linux-mm@kvack.org Cc: Andy Lutomirski <luto@kernel.org> Cc: Cyrill Gorcunov <gorcunov@openvz.org> Cc: Borislav Petkov <bp@suse.de> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Link: http://lkml.kernel.org/r/20170306141721.9188-4-dsafonov@virtuozzo.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2017-03-06 14:17:19 +00:00
static void arch_pick_mmap_base(unsigned long *base, unsigned long *legacy_base,
exec: pass stack rlimit into mm layout functions Patch series "exec: Pin stack limit during exec". Attempts to solve problems with the stack limit changing during exec continue to be frustrated[1][2]. In addition to the specific issues around the Stack Clash family of flaws, Andy Lutomirski pointed out[3] other places during exec where the stack limit is used and is assumed to be unchanging. Given the many places it gets used and the fact that it can be manipulated/raced via setrlimit() and prlimit(), I think the only way to handle this is to move away from the "current" view of the stack limit and instead attach it to the bprm, and plumb this down into the functions that need to know the stack limits. This series implements the approach. [1] 04e35f4495dd ("exec: avoid RLIMIT_STACK races with prlimit()") [2] 779f4e1c6c7c ("Revert "exec: avoid RLIMIT_STACK races with prlimit()"") [3] to security@kernel.org, "Subject: existing rlimit races?" This patch (of 3): Since it is possible that the stack rlimit can change externally during exec (either via another thread calling setrlimit() or another process calling prlimit()), provide a way to pass the rlimit down into the per-architecture mm layout functions so that the rlimit can stay in the bprm structure instead of sitting in the signal structure until exec is finalized. Link: http://lkml.kernel.org/r/1518638796-20819-2-git-send-email-keescook@chromium.org Signed-off-by: Kees Cook <keescook@chromium.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Ben Hutchings <ben@decadent.org.uk> Cc: Willy Tarreau <w@1wt.eu> Cc: Hugh Dickins <hughd@google.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: "Jason A. Donenfeld" <Jason@zx2c4.com> Cc: Rik van Riel <riel@redhat.com> Cc: Laura Abbott <labbott@redhat.com> Cc: Greg KH <greg@kroah.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Ben Hutchings <ben.hutchings@codethink.co.uk> Cc: Brad Spengler <spender@grsecurity.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-04-10 23:34:53 +00:00
unsigned long random_factor, unsigned long task_size,
struct rlimit *rlim_stack)
{
x86/mm: Introduce mmap_compat_base() for 32-bit mmap() mmap() uses a base address, from which it starts to look for a free space for allocation. The base address is stored in mm->mmap_base, which is calculated during exec(). The address depends on task's size, set rlimit for stack, ASLR randomization. The base depends on the task size and the number of random bits which are different for 64-bit and 32bit applications. Due to the fact, that the base address is fixed, its mmap() from a compat (32bit) syscall issued by a 64bit task will return a address which is based on the 64bit base address and does not fit into the 32bit address space (4GB). The returned pointer is truncated to 32bit, which results in an invalid address. To solve store a seperate compat address base plus a compat legacy address base in mm_struct. These bases are calculated at exec() time and can be used later to address the 32bit compat mmap() issued by 64 bit applications. As a consequence of this change 32-bit applications issuing a 64-bit syscall (after doing a long jump) will get a 64-bit mapping now. Before this change 32-bit applications always got a 32bit mapping. [ tglx: Massaged changelog and added a comment ] Signed-off-by: Dmitry Safonov <dsafonov@virtuozzo.com> Cc: 0x7f454c46@gmail.com Cc: linux-mm@kvack.org Cc: Andy Lutomirski <luto@kernel.org> Cc: Cyrill Gorcunov <gorcunov@openvz.org> Cc: Borislav Petkov <bp@suse.de> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Link: http://lkml.kernel.org/r/20170306141721.9188-4-dsafonov@virtuozzo.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2017-03-06 14:17:19 +00:00
*legacy_base = mmap_legacy_base(random_factor, task_size);
if (mmap_is_legacy())
*base = *legacy_base;
else
exec: pass stack rlimit into mm layout functions Patch series "exec: Pin stack limit during exec". Attempts to solve problems with the stack limit changing during exec continue to be frustrated[1][2]. In addition to the specific issues around the Stack Clash family of flaws, Andy Lutomirski pointed out[3] other places during exec where the stack limit is used and is assumed to be unchanging. Given the many places it gets used and the fact that it can be manipulated/raced via setrlimit() and prlimit(), I think the only way to handle this is to move away from the "current" view of the stack limit and instead attach it to the bprm, and plumb this down into the functions that need to know the stack limits. This series implements the approach. [1] 04e35f4495dd ("exec: avoid RLIMIT_STACK races with prlimit()") [2] 779f4e1c6c7c ("Revert "exec: avoid RLIMIT_STACK races with prlimit()"") [3] to security@kernel.org, "Subject: existing rlimit races?" This patch (of 3): Since it is possible that the stack rlimit can change externally during exec (either via another thread calling setrlimit() or another process calling prlimit()), provide a way to pass the rlimit down into the per-architecture mm layout functions so that the rlimit can stay in the bprm structure instead of sitting in the signal structure until exec is finalized. Link: http://lkml.kernel.org/r/1518638796-20819-2-git-send-email-keescook@chromium.org Signed-off-by: Kees Cook <keescook@chromium.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Ben Hutchings <ben@decadent.org.uk> Cc: Willy Tarreau <w@1wt.eu> Cc: Hugh Dickins <hughd@google.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: "Jason A. Donenfeld" <Jason@zx2c4.com> Cc: Rik van Riel <riel@redhat.com> Cc: Laura Abbott <labbott@redhat.com> Cc: Greg KH <greg@kroah.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Ben Hutchings <ben.hutchings@codethink.co.uk> Cc: Brad Spengler <spender@grsecurity.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-04-10 23:34:53 +00:00
*base = mmap_base(random_factor, task_size, rlim_stack);
x86/mm: Introduce mmap_compat_base() for 32-bit mmap() mmap() uses a base address, from which it starts to look for a free space for allocation. The base address is stored in mm->mmap_base, which is calculated during exec(). The address depends on task's size, set rlimit for stack, ASLR randomization. The base depends on the task size and the number of random bits which are different for 64-bit and 32bit applications. Due to the fact, that the base address is fixed, its mmap() from a compat (32bit) syscall issued by a 64bit task will return a address which is based on the 64bit base address and does not fit into the 32bit address space (4GB). The returned pointer is truncated to 32bit, which results in an invalid address. To solve store a seperate compat address base plus a compat legacy address base in mm_struct. These bases are calculated at exec() time and can be used later to address the 32bit compat mmap() issued by 64 bit applications. As a consequence of this change 32-bit applications issuing a 64-bit syscall (after doing a long jump) will get a 64-bit mapping now. Before this change 32-bit applications always got a 32bit mapping. [ tglx: Massaged changelog and added a comment ] Signed-off-by: Dmitry Safonov <dsafonov@virtuozzo.com> Cc: 0x7f454c46@gmail.com Cc: linux-mm@kvack.org Cc: Andy Lutomirski <luto@kernel.org> Cc: Cyrill Gorcunov <gorcunov@openvz.org> Cc: Borislav Petkov <bp@suse.de> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Link: http://lkml.kernel.org/r/20170306141721.9188-4-dsafonov@virtuozzo.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2017-03-06 14:17:19 +00:00
}
exec: pass stack rlimit into mm layout functions Patch series "exec: Pin stack limit during exec". Attempts to solve problems with the stack limit changing during exec continue to be frustrated[1][2]. In addition to the specific issues around the Stack Clash family of flaws, Andy Lutomirski pointed out[3] other places during exec where the stack limit is used and is assumed to be unchanging. Given the many places it gets used and the fact that it can be manipulated/raced via setrlimit() and prlimit(), I think the only way to handle this is to move away from the "current" view of the stack limit and instead attach it to the bprm, and plumb this down into the functions that need to know the stack limits. This series implements the approach. [1] 04e35f4495dd ("exec: avoid RLIMIT_STACK races with prlimit()") [2] 779f4e1c6c7c ("Revert "exec: avoid RLIMIT_STACK races with prlimit()"") [3] to security@kernel.org, "Subject: existing rlimit races?" This patch (of 3): Since it is possible that the stack rlimit can change externally during exec (either via another thread calling setrlimit() or another process calling prlimit()), provide a way to pass the rlimit down into the per-architecture mm layout functions so that the rlimit can stay in the bprm structure instead of sitting in the signal structure until exec is finalized. Link: http://lkml.kernel.org/r/1518638796-20819-2-git-send-email-keescook@chromium.org Signed-off-by: Kees Cook <keescook@chromium.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Ben Hutchings <ben@decadent.org.uk> Cc: Willy Tarreau <w@1wt.eu> Cc: Hugh Dickins <hughd@google.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: "Jason A. Donenfeld" <Jason@zx2c4.com> Cc: Rik van Riel <riel@redhat.com> Cc: Laura Abbott <labbott@redhat.com> Cc: Greg KH <greg@kroah.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Ben Hutchings <ben.hutchings@codethink.co.uk> Cc: Brad Spengler <spender@grsecurity.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-04-10 23:34:53 +00:00
void arch_pick_mmap_layout(struct mm_struct *mm, struct rlimit *rlim_stack)
x86/mm: Introduce mmap_compat_base() for 32-bit mmap() mmap() uses a base address, from which it starts to look for a free space for allocation. The base address is stored in mm->mmap_base, which is calculated during exec(). The address depends on task's size, set rlimit for stack, ASLR randomization. The base depends on the task size and the number of random bits which are different for 64-bit and 32bit applications. Due to the fact, that the base address is fixed, its mmap() from a compat (32bit) syscall issued by a 64bit task will return a address which is based on the 64bit base address and does not fit into the 32bit address space (4GB). The returned pointer is truncated to 32bit, which results in an invalid address. To solve store a seperate compat address base plus a compat legacy address base in mm_struct. These bases are calculated at exec() time and can be used later to address the 32bit compat mmap() issued by 64 bit applications. As a consequence of this change 32-bit applications issuing a 64-bit syscall (after doing a long jump) will get a 64-bit mapping now. Before this change 32-bit applications always got a 32bit mapping. [ tglx: Massaged changelog and added a comment ] Signed-off-by: Dmitry Safonov <dsafonov@virtuozzo.com> Cc: 0x7f454c46@gmail.com Cc: linux-mm@kvack.org Cc: Andy Lutomirski <luto@kernel.org> Cc: Cyrill Gorcunov <gorcunov@openvz.org> Cc: Borislav Petkov <bp@suse.de> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Link: http://lkml.kernel.org/r/20170306141721.9188-4-dsafonov@virtuozzo.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2017-03-06 14:17:19 +00:00
{
if (mmap_is_legacy())
mm->get_unmapped_area = arch_get_unmapped_area;
x86/mm: Introduce mmap_compat_base() for 32-bit mmap() mmap() uses a base address, from which it starts to look for a free space for allocation. The base address is stored in mm->mmap_base, which is calculated during exec(). The address depends on task's size, set rlimit for stack, ASLR randomization. The base depends on the task size and the number of random bits which are different for 64-bit and 32bit applications. Due to the fact, that the base address is fixed, its mmap() from a compat (32bit) syscall issued by a 64bit task will return a address which is based on the 64bit base address and does not fit into the 32bit address space (4GB). The returned pointer is truncated to 32bit, which results in an invalid address. To solve store a seperate compat address base plus a compat legacy address base in mm_struct. These bases are calculated at exec() time and can be used later to address the 32bit compat mmap() issued by 64 bit applications. As a consequence of this change 32-bit applications issuing a 64-bit syscall (after doing a long jump) will get a 64-bit mapping now. Before this change 32-bit applications always got a 32bit mapping. [ tglx: Massaged changelog and added a comment ] Signed-off-by: Dmitry Safonov <dsafonov@virtuozzo.com> Cc: 0x7f454c46@gmail.com Cc: linux-mm@kvack.org Cc: Andy Lutomirski <luto@kernel.org> Cc: Cyrill Gorcunov <gorcunov@openvz.org> Cc: Borislav Petkov <bp@suse.de> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Link: http://lkml.kernel.org/r/20170306141721.9188-4-dsafonov@virtuozzo.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2017-03-06 14:17:19 +00:00
else
mm->get_unmapped_area = arch_get_unmapped_area_topdown;
x86/mm: Introduce mmap_compat_base() for 32-bit mmap() mmap() uses a base address, from which it starts to look for a free space for allocation. The base address is stored in mm->mmap_base, which is calculated during exec(). The address depends on task's size, set rlimit for stack, ASLR randomization. The base depends on the task size and the number of random bits which are different for 64-bit and 32bit applications. Due to the fact, that the base address is fixed, its mmap() from a compat (32bit) syscall issued by a 64bit task will return a address which is based on the 64bit base address and does not fit into the 32bit address space (4GB). The returned pointer is truncated to 32bit, which results in an invalid address. To solve store a seperate compat address base plus a compat legacy address base in mm_struct. These bases are calculated at exec() time and can be used later to address the 32bit compat mmap() issued by 64 bit applications. As a consequence of this change 32-bit applications issuing a 64-bit syscall (after doing a long jump) will get a 64-bit mapping now. Before this change 32-bit applications always got a 32bit mapping. [ tglx: Massaged changelog and added a comment ] Signed-off-by: Dmitry Safonov <dsafonov@virtuozzo.com> Cc: 0x7f454c46@gmail.com Cc: linux-mm@kvack.org Cc: Andy Lutomirski <luto@kernel.org> Cc: Cyrill Gorcunov <gorcunov@openvz.org> Cc: Borislav Petkov <bp@suse.de> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Link: http://lkml.kernel.org/r/20170306141721.9188-4-dsafonov@virtuozzo.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2017-03-06 14:17:19 +00:00
arch_pick_mmap_base(&mm->mmap_base, &mm->mmap_legacy_base,
exec: pass stack rlimit into mm layout functions Patch series "exec: Pin stack limit during exec". Attempts to solve problems with the stack limit changing during exec continue to be frustrated[1][2]. In addition to the specific issues around the Stack Clash family of flaws, Andy Lutomirski pointed out[3] other places during exec where the stack limit is used and is assumed to be unchanging. Given the many places it gets used and the fact that it can be manipulated/raced via setrlimit() and prlimit(), I think the only way to handle this is to move away from the "current" view of the stack limit and instead attach it to the bprm, and plumb this down into the functions that need to know the stack limits. This series implements the approach. [1] 04e35f4495dd ("exec: avoid RLIMIT_STACK races with prlimit()") [2] 779f4e1c6c7c ("Revert "exec: avoid RLIMIT_STACK races with prlimit()"") [3] to security@kernel.org, "Subject: existing rlimit races?" This patch (of 3): Since it is possible that the stack rlimit can change externally during exec (either via another thread calling setrlimit() or another process calling prlimit()), provide a way to pass the rlimit down into the per-architecture mm layout functions so that the rlimit can stay in the bprm structure instead of sitting in the signal structure until exec is finalized. Link: http://lkml.kernel.org/r/1518638796-20819-2-git-send-email-keescook@chromium.org Signed-off-by: Kees Cook <keescook@chromium.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Ben Hutchings <ben@decadent.org.uk> Cc: Willy Tarreau <w@1wt.eu> Cc: Hugh Dickins <hughd@google.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: "Jason A. Donenfeld" <Jason@zx2c4.com> Cc: Rik van Riel <riel@redhat.com> Cc: Laura Abbott <labbott@redhat.com> Cc: Greg KH <greg@kroah.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Ben Hutchings <ben.hutchings@codethink.co.uk> Cc: Brad Spengler <spender@grsecurity.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-04-10 23:34:53 +00:00
arch_rnd(mmap64_rnd_bits), task_size_64bit(0),
rlim_stack);
x86/mm: Introduce mmap_compat_base() for 32-bit mmap() mmap() uses a base address, from which it starts to look for a free space for allocation. The base address is stored in mm->mmap_base, which is calculated during exec(). The address depends on task's size, set rlimit for stack, ASLR randomization. The base depends on the task size and the number of random bits which are different for 64-bit and 32bit applications. Due to the fact, that the base address is fixed, its mmap() from a compat (32bit) syscall issued by a 64bit task will return a address which is based on the 64bit base address and does not fit into the 32bit address space (4GB). The returned pointer is truncated to 32bit, which results in an invalid address. To solve store a seperate compat address base plus a compat legacy address base in mm_struct. These bases are calculated at exec() time and can be used later to address the 32bit compat mmap() issued by 64 bit applications. As a consequence of this change 32-bit applications issuing a 64-bit syscall (after doing a long jump) will get a 64-bit mapping now. Before this change 32-bit applications always got a 32bit mapping. [ tglx: Massaged changelog and added a comment ] Signed-off-by: Dmitry Safonov <dsafonov@virtuozzo.com> Cc: 0x7f454c46@gmail.com Cc: linux-mm@kvack.org Cc: Andy Lutomirski <luto@kernel.org> Cc: Cyrill Gorcunov <gorcunov@openvz.org> Cc: Borislav Petkov <bp@suse.de> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Link: http://lkml.kernel.org/r/20170306141721.9188-4-dsafonov@virtuozzo.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2017-03-06 14:17:19 +00:00
#ifdef CONFIG_HAVE_ARCH_COMPAT_MMAP_BASES
/*
* The mmap syscall mapping base decision depends solely on the
* syscall type (64-bit or compat). This applies for 64bit
* applications and 32bit applications. The 64bit syscall uses
* mmap_base, the compat syscall uses mmap_compat_base.
*/
arch_pick_mmap_base(&mm->mmap_compat_base, &mm->mmap_compat_legacy_base,
exec: pass stack rlimit into mm layout functions Patch series "exec: Pin stack limit during exec". Attempts to solve problems with the stack limit changing during exec continue to be frustrated[1][2]. In addition to the specific issues around the Stack Clash family of flaws, Andy Lutomirski pointed out[3] other places during exec where the stack limit is used and is assumed to be unchanging. Given the many places it gets used and the fact that it can be manipulated/raced via setrlimit() and prlimit(), I think the only way to handle this is to move away from the "current" view of the stack limit and instead attach it to the bprm, and plumb this down into the functions that need to know the stack limits. This series implements the approach. [1] 04e35f4495dd ("exec: avoid RLIMIT_STACK races with prlimit()") [2] 779f4e1c6c7c ("Revert "exec: avoid RLIMIT_STACK races with prlimit()"") [3] to security@kernel.org, "Subject: existing rlimit races?" This patch (of 3): Since it is possible that the stack rlimit can change externally during exec (either via another thread calling setrlimit() or another process calling prlimit()), provide a way to pass the rlimit down into the per-architecture mm layout functions so that the rlimit can stay in the bprm structure instead of sitting in the signal structure until exec is finalized. Link: http://lkml.kernel.org/r/1518638796-20819-2-git-send-email-keescook@chromium.org Signed-off-by: Kees Cook <keescook@chromium.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Ben Hutchings <ben@decadent.org.uk> Cc: Willy Tarreau <w@1wt.eu> Cc: Hugh Dickins <hughd@google.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: "Jason A. Donenfeld" <Jason@zx2c4.com> Cc: Rik van Riel <riel@redhat.com> Cc: Laura Abbott <labbott@redhat.com> Cc: Greg KH <greg@kroah.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Ben Hutchings <ben.hutchings@codethink.co.uk> Cc: Brad Spengler <spender@grsecurity.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-04-10 23:34:53 +00:00
arch_rnd(mmap32_rnd_bits), task_size_32bit(),
rlim_stack);
x86/mm: Introduce mmap_compat_base() for 32-bit mmap() mmap() uses a base address, from which it starts to look for a free space for allocation. The base address is stored in mm->mmap_base, which is calculated during exec(). The address depends on task's size, set rlimit for stack, ASLR randomization. The base depends on the task size and the number of random bits which are different for 64-bit and 32bit applications. Due to the fact, that the base address is fixed, its mmap() from a compat (32bit) syscall issued by a 64bit task will return a address which is based on the 64bit base address and does not fit into the 32bit address space (4GB). The returned pointer is truncated to 32bit, which results in an invalid address. To solve store a seperate compat address base plus a compat legacy address base in mm_struct. These bases are calculated at exec() time and can be used later to address the 32bit compat mmap() issued by 64 bit applications. As a consequence of this change 32-bit applications issuing a 64-bit syscall (after doing a long jump) will get a 64-bit mapping now. Before this change 32-bit applications always got a 32bit mapping. [ tglx: Massaged changelog and added a comment ] Signed-off-by: Dmitry Safonov <dsafonov@virtuozzo.com> Cc: 0x7f454c46@gmail.com Cc: linux-mm@kvack.org Cc: Andy Lutomirski <luto@kernel.org> Cc: Cyrill Gorcunov <gorcunov@openvz.org> Cc: Borislav Petkov <bp@suse.de> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Link: http://lkml.kernel.org/r/20170306141721.9188-4-dsafonov@virtuozzo.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2017-03-06 14:17:19 +00:00
#endif
}
unsigned long get_mmap_base(int is_legacy)
{
struct mm_struct *mm = current->mm;
#ifdef CONFIG_HAVE_ARCH_COMPAT_MMAP_BASES
if (in_compat_syscall()) {
return is_legacy ? mm->mmap_compat_legacy_base
: mm->mmap_compat_base;
}
#endif
return is_legacy ? mm->mmap_legacy_base : mm->mmap_base;
}
const char *arch_vma_name(struct vm_area_struct *vma)
{
if (vma->vm_flags & VM_MPX)
return "[mpx]";
return NULL;
}
2017-11-15 14:36:06 +00:00
/**
* mmap_address_hint_valid - Validate the address hint of mmap
* @addr: Address hint
* @len: Mapping length
*
* Check whether @addr and @addr + @len result in a valid mapping.
*
* On 32bit this only checks whether @addr + @len is <= TASK_SIZE.
*
* On 64bit with 5-level page tables another sanity check is required
* because mappings requested by mmap(@addr, 0) which cross the 47-bit
* virtual address boundary can cause the following theoretical issue:
*
* An application calls mmap(addr, 0), i.e. without MAP_FIXED, where @addr
* is below the border of the 47-bit address space and @addr + @len is
* above the border.
*
* With 4-level paging this request succeeds, but the resulting mapping
* address will always be within the 47-bit virtual address space, because
* the hint address does not result in a valid mapping and is
* ignored. Hence applications which are not prepared to handle virtual
* addresses above 47-bit work correctly.
*
* With 5-level paging this request would be granted and result in a
* mapping which crosses the border of the 47-bit virtual address
* space. If the application cannot handle addresses above 47-bit this
* will lead to misbehaviour and hard to diagnose failures.
*
* Therefore ignore address hints which would result in a mapping crossing
* the 47-bit virtual address boundary.
*
* Note, that in the same scenario with MAP_FIXED the behaviour is
* different. The request with @addr < 47-bit and @addr + @len > 47-bit
* fails on a 4-level paging machine but succeeds on a 5-level paging
* machine. It is reasonable to expect that an application does not rely on
* the failure of such a fixed mapping request, so the restriction is not
* applied.
*/
bool mmap_address_hint_valid(unsigned long addr, unsigned long len)
{
if (TASK_SIZE - len < addr)
return false;
return (addr > DEFAULT_MAP_WINDOW) == (addr + len > DEFAULT_MAP_WINDOW);
}
x86/mm: Limit mmap() of /dev/mem to valid physical addresses One thing /dev/mem access APIs should verify is that there's no way that excessively large pfn's can leak into the high bits of the page table entry. In particular, if people can use "very large physical page addresses" through /dev/mem to set the bits past bit 58 - SOFTW4 and permission key bits and NX bit, that could *really* confuse the kernel. We had an earlier attempt: ce56a86e2ade ("x86/mm: Limit mmap() of /dev/mem to valid physical addresses") ... which turned out to be too restrictive (breaking mem=... bootups for example) and had to be reverted in: 90edaac62729 ("Revert "x86/mm: Limit mmap() of /dev/mem to valid physical addresses"") This v2 attempt modifies the original patch and makes sure that mmap(/dev/mem) limits the pfns so that it at least fits in the actual pteval_t architecturally: - Make sure mmap_mem() actually validates that the offset fits in phys_addr_t ( This may be indirectly true due to some other check, but it's not entirely obvious. ) - Change valid_mmap_phys_addr_range() to just use phys_addr_valid() on the top byte ( Top byte is sufficient, because mmap_mem() has already checked that it cannot wrap. ) - Add a few comments about what the valid_phys_addr_range() vs. valid_mmap_phys_addr_range() difference is. Signed-off-by: Craig Bergstrom <craigb@google.com> [ Fixed the checks and added comments. ] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> [ Collected the discussion and patches into a commit. ] Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Fengguang Wu <fengguang.wu@intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Hans Verkuil <hans.verkuil@cisco.com> Cc: Mauro Carvalho Chehab <mchehab@s-opensource.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sander Eikelenboom <linux@eikelenboom.it> Cc: Sean Young <sean@mess.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/CA+55aFyEcOMb657vWSmrM13OxmHxC-XxeBmNis=DwVvpJUOogQ@mail.gmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-11-15 22:29:51 +00:00
/* Can we access it for direct reading/writing? Must be RAM: */
int valid_phys_addr_range(phys_addr_t addr, size_t count)
{
return addr + count <= __pa(high_memory);
}
/* Can we access it through mmap? Must be a valid physical address: */
int valid_mmap_phys_addr_range(unsigned long pfn, size_t count)
{
phys_addr_t addr = (phys_addr_t)pfn << PAGE_SHIFT;
return phys_addr_valid(addr + count - 1);
}
x86/speculation/l1tf: Disallow non privileged high MMIO PROT_NONE mappings For L1TF PROT_NONE mappings are protected by inverting the PFN in the page table entry. This sets the high bits in the CPU's address space, thus making sure to point to not point an unmapped entry to valid cached memory. Some server system BIOSes put the MMIO mappings high up in the physical address space. If such an high mapping was mapped to unprivileged users they could attack low memory by setting such a mapping to PROT_NONE. This could happen through a special device driver which is not access protected. Normal /dev/mem is of course access protected. To avoid this forbid PROT_NONE mappings or mprotect for high MMIO mappings. Valid page mappings are allowed because the system is then unsafe anyways. It's not expected that users commonly use PROT_NONE on MMIO. But to minimize any impact this is only enforced if the mapping actually refers to a high MMIO address (defined as the MAX_PA-1 bit being set), and also skip the check for root. For mmaps this is straight forward and can be handled in vm_insert_pfn and in remap_pfn_range(). For mprotect it's a bit trickier. At the point where the actual PTEs are accessed a lot of state has been changed and it would be difficult to undo on an error. Since this is a uncommon case use a separate early page talk walk pass for MMIO PROT_NONE mappings that checks for this condition early. For non MMIO and non PROT_NONE there are no changes. Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Josh Poimboeuf <jpoimboe@redhat.com> Acked-by: Dave Hansen <dave.hansen@intel.com>
2018-06-13 22:48:27 +00:00
/*
* Only allow root to set high MMIO mappings to PROT_NONE.
* This prevents an unpriv. user to set them to PROT_NONE and invert
* them, then pointing to valid memory for L1TF speculation.
*
* Note: for locked down kernels may want to disable the root override.
*/
bool pfn_modify_allowed(unsigned long pfn, pgprot_t prot)
{
if (!boot_cpu_has_bug(X86_BUG_L1TF))
return true;
if (!__pte_needs_invert(pgprot_val(prot)))
return true;
/* If it's real memory always allow */
if (pfn_valid(pfn))
return true;
x86/speculation/l1tf: Fix off-by-one error when warning that system has too much RAM Two users have reported [1] that they have an "extremely unlikely" system with more than MAX_PA/2 memory and L1TF mitigation is not effective. In fact it's a CPU with 36bits phys limit (64GB) and 32GB memory, but due to holes in the e820 map, the main region is almost 500MB over the 32GB limit: [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000081effffff] usable Suggestions to use 'mem=32G' to enable the L1TF mitigation while losing the 500MB revealed, that there's an off-by-one error in the check in l1tf_select_mitigation(). l1tf_pfn_limit() returns the last usable pfn (inclusive) and the range check in the mitigation path does not take this into account. Instead of amending the range check, make l1tf_pfn_limit() return the first PFN which is over the limit which is less error prone. Adjust the other users accordingly. [1] https://bugzilla.suse.com/show_bug.cgi?id=1105536 Fixes: 17dbca119312 ("x86/speculation/l1tf: Add sysfs reporting for l1tf") Reported-by: George Anchev <studio@anchev.net> Reported-by: Christopher Snowhill <kode54@gmail.com> Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: "H . Peter Anvin" <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andi Kleen <ak@linux.intel.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20180823134418.17008-1-vbabka@suse.cz
2018-08-23 13:44:18 +00:00
if (pfn >= l1tf_pfn_limit() && !capable(CAP_SYS_ADMIN))
x86/speculation/l1tf: Disallow non privileged high MMIO PROT_NONE mappings For L1TF PROT_NONE mappings are protected by inverting the PFN in the page table entry. This sets the high bits in the CPU's address space, thus making sure to point to not point an unmapped entry to valid cached memory. Some server system BIOSes put the MMIO mappings high up in the physical address space. If such an high mapping was mapped to unprivileged users they could attack low memory by setting such a mapping to PROT_NONE. This could happen through a special device driver which is not access protected. Normal /dev/mem is of course access protected. To avoid this forbid PROT_NONE mappings or mprotect for high MMIO mappings. Valid page mappings are allowed because the system is then unsafe anyways. It's not expected that users commonly use PROT_NONE on MMIO. But to minimize any impact this is only enforced if the mapping actually refers to a high MMIO address (defined as the MAX_PA-1 bit being set), and also skip the check for root. For mmaps this is straight forward and can be handled in vm_insert_pfn and in remap_pfn_range(). For mprotect it's a bit trickier. At the point where the actual PTEs are accessed a lot of state has been changed and it would be difficult to undo on an error. Since this is a uncommon case use a separate early page talk walk pass for MMIO PROT_NONE mappings that checks for this condition early. For non MMIO and non PROT_NONE there are no changes. Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Josh Poimboeuf <jpoimboe@redhat.com> Acked-by: Dave Hansen <dave.hansen@intel.com>
2018-06-13 22:48:27 +00:00
return false;
return true;
}