2018-05-31 17:11:03 +00:00
|
|
|
// SPDX-License-Identifier: GPL-2.0
|
rpmsg: Driver for user space endpoint interface
This driver allows rpmsg instances to expose access to rpmsg endpoints
to user space processes. It provides a control interface, allowing
userspace to export endpoints and an endpoint interface for each exposed
endpoint.
The implementation is based on prior art by Texas Instrument, Google,
PetaLogix and was derived from a FreeRTOS performance statistics driver
written by Michal Simek.
The control interface provides a "create endpoint" ioctl, which is fed a
name, source and destination address. The three values are used to
create the endpoint, in a backend-specific way, and a rpmsg endpoint
device is created - with the three parameters are available in sysfs for
udev usage.
E.g. to create an endpoint device for one of the Qualcomm SMD channel
related to DIAG one would issue:
struct rpmsg_endpoint_info info = { "DIAG_CNTL", 0, 0 };
int fd = open("/dev/rpmsg_ctrl0", O_RDWR);
ioctl(fd, RPMSG_CREATE_EPT_IOCTL, &info);
Each created endpoint device shows up as an individual character device
in /dev, allowing permission to be controlled on a per-endpoint basis.
The rpmsg endpoint will be created and destroyed following the opening
and closing of the endpoint device, allowing rpmsg backends to open and
close the physical channel, if supported by the wire protocol.
Cc: Marek Novak <marek.novak@nxp.com>
Cc: Matteo Sartori <matteo.sartori@t3lab.it>
Cc: Michal Simek <monstr@monstr.eu>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2017-01-11 14:35:12 +00:00
|
|
|
/*
|
2022-01-24 10:25:14 +00:00
|
|
|
* Copyright (C) 2022, STMicroelectronics
|
rpmsg: Driver for user space endpoint interface
This driver allows rpmsg instances to expose access to rpmsg endpoints
to user space processes. It provides a control interface, allowing
userspace to export endpoints and an endpoint interface for each exposed
endpoint.
The implementation is based on prior art by Texas Instrument, Google,
PetaLogix and was derived from a FreeRTOS performance statistics driver
written by Michal Simek.
The control interface provides a "create endpoint" ioctl, which is fed a
name, source and destination address. The three values are used to
create the endpoint, in a backend-specific way, and a rpmsg endpoint
device is created - with the three parameters are available in sysfs for
udev usage.
E.g. to create an endpoint device for one of the Qualcomm SMD channel
related to DIAG one would issue:
struct rpmsg_endpoint_info info = { "DIAG_CNTL", 0, 0 };
int fd = open("/dev/rpmsg_ctrl0", O_RDWR);
ioctl(fd, RPMSG_CREATE_EPT_IOCTL, &info);
Each created endpoint device shows up as an individual character device
in /dev, allowing permission to be controlled on a per-endpoint basis.
The rpmsg endpoint will be created and destroyed following the opening
and closing of the endpoint device, allowing rpmsg backends to open and
close the physical channel, if supported by the wire protocol.
Cc: Marek Novak <marek.novak@nxp.com>
Cc: Matteo Sartori <matteo.sartori@t3lab.it>
Cc: Michal Simek <monstr@monstr.eu>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2017-01-11 14:35:12 +00:00
|
|
|
* Copyright (c) 2016, Linaro Ltd.
|
|
|
|
* Copyright (c) 2012, Michal Simek <monstr@monstr.eu>
|
|
|
|
* Copyright (c) 2012, PetaLogix
|
|
|
|
* Copyright (c) 2011, Texas Instruments, Inc.
|
|
|
|
* Copyright (c) 2011, Google, Inc.
|
|
|
|
*
|
|
|
|
* Based on rpmsg performance statistics driver by Michal Simek, which in turn
|
|
|
|
* was based on TI & Google OMX rpmsg driver.
|
|
|
|
*/
|
2021-11-08 13:59:45 +00:00
|
|
|
|
|
|
|
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
|
|
|
|
|
rpmsg: Driver for user space endpoint interface
This driver allows rpmsg instances to expose access to rpmsg endpoints
to user space processes. It provides a control interface, allowing
userspace to export endpoints and an endpoint interface for each exposed
endpoint.
The implementation is based on prior art by Texas Instrument, Google,
PetaLogix and was derived from a FreeRTOS performance statistics driver
written by Michal Simek.
The control interface provides a "create endpoint" ioctl, which is fed a
name, source and destination address. The three values are used to
create the endpoint, in a backend-specific way, and a rpmsg endpoint
device is created - with the three parameters are available in sysfs for
udev usage.
E.g. to create an endpoint device for one of the Qualcomm SMD channel
related to DIAG one would issue:
struct rpmsg_endpoint_info info = { "DIAG_CNTL", 0, 0 };
int fd = open("/dev/rpmsg_ctrl0", O_RDWR);
ioctl(fd, RPMSG_CREATE_EPT_IOCTL, &info);
Each created endpoint device shows up as an individual character device
in /dev, allowing permission to be controlled on a per-endpoint basis.
The rpmsg endpoint will be created and destroyed following the opening
and closing of the endpoint device, allowing rpmsg backends to open and
close the physical channel, if supported by the wire protocol.
Cc: Marek Novak <marek.novak@nxp.com>
Cc: Matteo Sartori <matteo.sartori@t3lab.it>
Cc: Michal Simek <monstr@monstr.eu>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2017-01-11 14:35:12 +00:00
|
|
|
#include <linux/cdev.h>
|
|
|
|
#include <linux/device.h>
|
|
|
|
#include <linux/fs.h>
|
|
|
|
#include <linux/idr.h>
|
|
|
|
#include <linux/kernel.h>
|
|
|
|
#include <linux/module.h>
|
|
|
|
#include <linux/poll.h>
|
|
|
|
#include <linux/rpmsg.h>
|
|
|
|
#include <linux/skbuff.h>
|
|
|
|
#include <linux/slab.h>
|
|
|
|
#include <linux/uaccess.h>
|
|
|
|
#include <uapi/linux/rpmsg.h>
|
|
|
|
|
2022-01-24 10:25:14 +00:00
|
|
|
#include "rpmsg_char.h"
|
2022-01-24 10:25:15 +00:00
|
|
|
#include "rpmsg_internal.h"
|
2022-01-24 10:25:14 +00:00
|
|
|
|
rpmsg: Driver for user space endpoint interface
This driver allows rpmsg instances to expose access to rpmsg endpoints
to user space processes. It provides a control interface, allowing
userspace to export endpoints and an endpoint interface for each exposed
endpoint.
The implementation is based on prior art by Texas Instrument, Google,
PetaLogix and was derived from a FreeRTOS performance statistics driver
written by Michal Simek.
The control interface provides a "create endpoint" ioctl, which is fed a
name, source and destination address. The three values are used to
create the endpoint, in a backend-specific way, and a rpmsg endpoint
device is created - with the three parameters are available in sysfs for
udev usage.
E.g. to create an endpoint device for one of the Qualcomm SMD channel
related to DIAG one would issue:
struct rpmsg_endpoint_info info = { "DIAG_CNTL", 0, 0 };
int fd = open("/dev/rpmsg_ctrl0", O_RDWR);
ioctl(fd, RPMSG_CREATE_EPT_IOCTL, &info);
Each created endpoint device shows up as an individual character device
in /dev, allowing permission to be controlled on a per-endpoint basis.
The rpmsg endpoint will be created and destroyed following the opening
and closing of the endpoint device, allowing rpmsg backends to open and
close the physical channel, if supported by the wire protocol.
Cc: Marek Novak <marek.novak@nxp.com>
Cc: Matteo Sartori <matteo.sartori@t3lab.it>
Cc: Michal Simek <monstr@monstr.eu>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2017-01-11 14:35:12 +00:00
|
|
|
#define RPMSG_DEV_MAX (MINORMASK + 1)
|
|
|
|
|
|
|
|
static dev_t rpmsg_major;
|
|
|
|
|
|
|
|
static DEFINE_IDA(rpmsg_ept_ida);
|
|
|
|
static DEFINE_IDA(rpmsg_minor_ida);
|
|
|
|
|
|
|
|
#define dev_to_eptdev(dev) container_of(dev, struct rpmsg_eptdev, dev)
|
|
|
|
#define cdev_to_eptdev(i_cdev) container_of(i_cdev, struct rpmsg_eptdev, cdev)
|
|
|
|
|
|
|
|
/**
|
|
|
|
* struct rpmsg_eptdev - endpoint device context
|
|
|
|
* @dev: endpoint device
|
|
|
|
* @cdev: cdev for the endpoint device
|
|
|
|
* @rpdev: underlaying rpmsg device
|
|
|
|
* @chinfo: info used to open the endpoint
|
|
|
|
* @ept_lock: synchronization of @ept modifications
|
|
|
|
* @ept: rpmsg endpoint reference, when open
|
|
|
|
* @queue_lock: synchronization of @queue operations
|
|
|
|
* @queue: incoming message queue
|
|
|
|
* @readq: wait object for incoming queue
|
2022-01-24 10:25:22 +00:00
|
|
|
* @default_ept: set to channel default endpoint if the default endpoint should be re-used
|
|
|
|
* on device open to prevent endpoint address update.
|
rpmsg: Driver for user space endpoint interface
This driver allows rpmsg instances to expose access to rpmsg endpoints
to user space processes. It provides a control interface, allowing
userspace to export endpoints and an endpoint interface for each exposed
endpoint.
The implementation is based on prior art by Texas Instrument, Google,
PetaLogix and was derived from a FreeRTOS performance statistics driver
written by Michal Simek.
The control interface provides a "create endpoint" ioctl, which is fed a
name, source and destination address. The three values are used to
create the endpoint, in a backend-specific way, and a rpmsg endpoint
device is created - with the three parameters are available in sysfs for
udev usage.
E.g. to create an endpoint device for one of the Qualcomm SMD channel
related to DIAG one would issue:
struct rpmsg_endpoint_info info = { "DIAG_CNTL", 0, 0 };
int fd = open("/dev/rpmsg_ctrl0", O_RDWR);
ioctl(fd, RPMSG_CREATE_EPT_IOCTL, &info);
Each created endpoint device shows up as an individual character device
in /dev, allowing permission to be controlled on a per-endpoint basis.
The rpmsg endpoint will be created and destroyed following the opening
and closing of the endpoint device, allowing rpmsg backends to open and
close the physical channel, if supported by the wire protocol.
Cc: Marek Novak <marek.novak@nxp.com>
Cc: Matteo Sartori <matteo.sartori@t3lab.it>
Cc: Michal Simek <monstr@monstr.eu>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2017-01-11 14:35:12 +00:00
|
|
|
*/
|
|
|
|
struct rpmsg_eptdev {
|
|
|
|
struct device dev;
|
|
|
|
struct cdev cdev;
|
|
|
|
|
|
|
|
struct rpmsg_device *rpdev;
|
|
|
|
struct rpmsg_channel_info chinfo;
|
|
|
|
|
|
|
|
struct mutex ept_lock;
|
|
|
|
struct rpmsg_endpoint *ept;
|
2022-01-24 10:25:22 +00:00
|
|
|
struct rpmsg_endpoint *default_ept;
|
rpmsg: Driver for user space endpoint interface
This driver allows rpmsg instances to expose access to rpmsg endpoints
to user space processes. It provides a control interface, allowing
userspace to export endpoints and an endpoint interface for each exposed
endpoint.
The implementation is based on prior art by Texas Instrument, Google,
PetaLogix and was derived from a FreeRTOS performance statistics driver
written by Michal Simek.
The control interface provides a "create endpoint" ioctl, which is fed a
name, source and destination address. The three values are used to
create the endpoint, in a backend-specific way, and a rpmsg endpoint
device is created - with the three parameters are available in sysfs for
udev usage.
E.g. to create an endpoint device for one of the Qualcomm SMD channel
related to DIAG one would issue:
struct rpmsg_endpoint_info info = { "DIAG_CNTL", 0, 0 };
int fd = open("/dev/rpmsg_ctrl0", O_RDWR);
ioctl(fd, RPMSG_CREATE_EPT_IOCTL, &info);
Each created endpoint device shows up as an individual character device
in /dev, allowing permission to be controlled on a per-endpoint basis.
The rpmsg endpoint will be created and destroyed following the opening
and closing of the endpoint device, allowing rpmsg backends to open and
close the physical channel, if supported by the wire protocol.
Cc: Marek Novak <marek.novak@nxp.com>
Cc: Matteo Sartori <matteo.sartori@t3lab.it>
Cc: Michal Simek <monstr@monstr.eu>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2017-01-11 14:35:12 +00:00
|
|
|
|
|
|
|
spinlock_t queue_lock;
|
|
|
|
struct sk_buff_head queue;
|
|
|
|
wait_queue_head_t readq;
|
2022-01-24 10:25:22 +00:00
|
|
|
|
rpmsg: Driver for user space endpoint interface
This driver allows rpmsg instances to expose access to rpmsg endpoints
to user space processes. It provides a control interface, allowing
userspace to export endpoints and an endpoint interface for each exposed
endpoint.
The implementation is based on prior art by Texas Instrument, Google,
PetaLogix and was derived from a FreeRTOS performance statistics driver
written by Michal Simek.
The control interface provides a "create endpoint" ioctl, which is fed a
name, source and destination address. The three values are used to
create the endpoint, in a backend-specific way, and a rpmsg endpoint
device is created - with the three parameters are available in sysfs for
udev usage.
E.g. to create an endpoint device for one of the Qualcomm SMD channel
related to DIAG one would issue:
struct rpmsg_endpoint_info info = { "DIAG_CNTL", 0, 0 };
int fd = open("/dev/rpmsg_ctrl0", O_RDWR);
ioctl(fd, RPMSG_CREATE_EPT_IOCTL, &info);
Each created endpoint device shows up as an individual character device
in /dev, allowing permission to be controlled on a per-endpoint basis.
The rpmsg endpoint will be created and destroyed following the opening
and closing of the endpoint device, allowing rpmsg backends to open and
close the physical channel, if supported by the wire protocol.
Cc: Marek Novak <marek.novak@nxp.com>
Cc: Matteo Sartori <matteo.sartori@t3lab.it>
Cc: Michal Simek <monstr@monstr.eu>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2017-01-11 14:35:12 +00:00
|
|
|
};
|
|
|
|
|
2022-01-24 10:25:14 +00:00
|
|
|
int rpmsg_chrdev_eptdev_destroy(struct device *dev, void *data)
|
rpmsg: Driver for user space endpoint interface
This driver allows rpmsg instances to expose access to rpmsg endpoints
to user space processes. It provides a control interface, allowing
userspace to export endpoints and an endpoint interface for each exposed
endpoint.
The implementation is based on prior art by Texas Instrument, Google,
PetaLogix and was derived from a FreeRTOS performance statistics driver
written by Michal Simek.
The control interface provides a "create endpoint" ioctl, which is fed a
name, source and destination address. The three values are used to
create the endpoint, in a backend-specific way, and a rpmsg endpoint
device is created - with the three parameters are available in sysfs for
udev usage.
E.g. to create an endpoint device for one of the Qualcomm SMD channel
related to DIAG one would issue:
struct rpmsg_endpoint_info info = { "DIAG_CNTL", 0, 0 };
int fd = open("/dev/rpmsg_ctrl0", O_RDWR);
ioctl(fd, RPMSG_CREATE_EPT_IOCTL, &info);
Each created endpoint device shows up as an individual character device
in /dev, allowing permission to be controlled on a per-endpoint basis.
The rpmsg endpoint will be created and destroyed following the opening
and closing of the endpoint device, allowing rpmsg backends to open and
close the physical channel, if supported by the wire protocol.
Cc: Marek Novak <marek.novak@nxp.com>
Cc: Matteo Sartori <matteo.sartori@t3lab.it>
Cc: Michal Simek <monstr@monstr.eu>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2017-01-11 14:35:12 +00:00
|
|
|
{
|
|
|
|
struct rpmsg_eptdev *eptdev = dev_to_eptdev(dev);
|
|
|
|
|
|
|
|
mutex_lock(&eptdev->ept_lock);
|
|
|
|
if (eptdev->ept) {
|
|
|
|
rpmsg_destroy_ept(eptdev->ept);
|
|
|
|
eptdev->ept = NULL;
|
|
|
|
}
|
|
|
|
mutex_unlock(&eptdev->ept_lock);
|
|
|
|
|
|
|
|
/* wake up any blocked readers */
|
|
|
|
wake_up_interruptible(&eptdev->readq);
|
|
|
|
|
2022-01-10 18:47:37 +00:00
|
|
|
cdev_device_del(&eptdev->cdev, &eptdev->dev);
|
rpmsg: Driver for user space endpoint interface
This driver allows rpmsg instances to expose access to rpmsg endpoints
to user space processes. It provides a control interface, allowing
userspace to export endpoints and an endpoint interface for each exposed
endpoint.
The implementation is based on prior art by Texas Instrument, Google,
PetaLogix and was derived from a FreeRTOS performance statistics driver
written by Michal Simek.
The control interface provides a "create endpoint" ioctl, which is fed a
name, source and destination address. The three values are used to
create the endpoint, in a backend-specific way, and a rpmsg endpoint
device is created - with the three parameters are available in sysfs for
udev usage.
E.g. to create an endpoint device for one of the Qualcomm SMD channel
related to DIAG one would issue:
struct rpmsg_endpoint_info info = { "DIAG_CNTL", 0, 0 };
int fd = open("/dev/rpmsg_ctrl0", O_RDWR);
ioctl(fd, RPMSG_CREATE_EPT_IOCTL, &info);
Each created endpoint device shows up as an individual character device
in /dev, allowing permission to be controlled on a per-endpoint basis.
The rpmsg endpoint will be created and destroyed following the opening
and closing of the endpoint device, allowing rpmsg backends to open and
close the physical channel, if supported by the wire protocol.
Cc: Marek Novak <marek.novak@nxp.com>
Cc: Matteo Sartori <matteo.sartori@t3lab.it>
Cc: Michal Simek <monstr@monstr.eu>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2017-01-11 14:35:12 +00:00
|
|
|
put_device(&eptdev->dev);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
2022-01-24 10:25:14 +00:00
|
|
|
EXPORT_SYMBOL(rpmsg_chrdev_eptdev_destroy);
|
rpmsg: Driver for user space endpoint interface
This driver allows rpmsg instances to expose access to rpmsg endpoints
to user space processes. It provides a control interface, allowing
userspace to export endpoints and an endpoint interface for each exposed
endpoint.
The implementation is based on prior art by Texas Instrument, Google,
PetaLogix and was derived from a FreeRTOS performance statistics driver
written by Michal Simek.
The control interface provides a "create endpoint" ioctl, which is fed a
name, source and destination address. The three values are used to
create the endpoint, in a backend-specific way, and a rpmsg endpoint
device is created - with the three parameters are available in sysfs for
udev usage.
E.g. to create an endpoint device for one of the Qualcomm SMD channel
related to DIAG one would issue:
struct rpmsg_endpoint_info info = { "DIAG_CNTL", 0, 0 };
int fd = open("/dev/rpmsg_ctrl0", O_RDWR);
ioctl(fd, RPMSG_CREATE_EPT_IOCTL, &info);
Each created endpoint device shows up as an individual character device
in /dev, allowing permission to be controlled on a per-endpoint basis.
The rpmsg endpoint will be created and destroyed following the opening
and closing of the endpoint device, allowing rpmsg backends to open and
close the physical channel, if supported by the wire protocol.
Cc: Marek Novak <marek.novak@nxp.com>
Cc: Matteo Sartori <matteo.sartori@t3lab.it>
Cc: Michal Simek <monstr@monstr.eu>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2017-01-11 14:35:12 +00:00
|
|
|
|
|
|
|
static int rpmsg_ept_cb(struct rpmsg_device *rpdev, void *buf, int len,
|
|
|
|
void *priv, u32 addr)
|
|
|
|
{
|
|
|
|
struct rpmsg_eptdev *eptdev = priv;
|
|
|
|
struct sk_buff *skb;
|
|
|
|
|
|
|
|
skb = alloc_skb(len, GFP_ATOMIC);
|
|
|
|
if (!skb)
|
|
|
|
return -ENOMEM;
|
|
|
|
|
networking: introduce and use skb_put_data()
A common pattern with skb_put() is to just want to memcpy()
some data into the new space, introduce skb_put_data() for
this.
An spatch similar to the one for skb_put_zero() converts many
of the places using it:
@@
identifier p, p2;
expression len, skb, data;
type t, t2;
@@
(
-p = skb_put(skb, len);
+p = skb_put_data(skb, data, len);
|
-p = (t)skb_put(skb, len);
+p = skb_put_data(skb, data, len);
)
(
p2 = (t2)p;
-memcpy(p2, data, len);
|
-memcpy(p, data, len);
)
@@
type t, t2;
identifier p, p2;
expression skb, data;
@@
t *p;
...
(
-p = skb_put(skb, sizeof(t));
+p = skb_put_data(skb, data, sizeof(t));
|
-p = (t *)skb_put(skb, sizeof(t));
+p = skb_put_data(skb, data, sizeof(t));
)
(
p2 = (t2)p;
-memcpy(p2, data, sizeof(*p));
|
-memcpy(p, data, sizeof(*p));
)
@@
expression skb, len, data;
@@
-memcpy(skb_put(skb, len), data, len);
+skb_put_data(skb, data, len);
(again, manually post-processed to retain some comments)
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-16 12:29:20 +00:00
|
|
|
skb_put_data(skb, buf, len);
|
rpmsg: Driver for user space endpoint interface
This driver allows rpmsg instances to expose access to rpmsg endpoints
to user space processes. It provides a control interface, allowing
userspace to export endpoints and an endpoint interface for each exposed
endpoint.
The implementation is based on prior art by Texas Instrument, Google,
PetaLogix and was derived from a FreeRTOS performance statistics driver
written by Michal Simek.
The control interface provides a "create endpoint" ioctl, which is fed a
name, source and destination address. The three values are used to
create the endpoint, in a backend-specific way, and a rpmsg endpoint
device is created - with the three parameters are available in sysfs for
udev usage.
E.g. to create an endpoint device for one of the Qualcomm SMD channel
related to DIAG one would issue:
struct rpmsg_endpoint_info info = { "DIAG_CNTL", 0, 0 };
int fd = open("/dev/rpmsg_ctrl0", O_RDWR);
ioctl(fd, RPMSG_CREATE_EPT_IOCTL, &info);
Each created endpoint device shows up as an individual character device
in /dev, allowing permission to be controlled on a per-endpoint basis.
The rpmsg endpoint will be created and destroyed following the opening
and closing of the endpoint device, allowing rpmsg backends to open and
close the physical channel, if supported by the wire protocol.
Cc: Marek Novak <marek.novak@nxp.com>
Cc: Matteo Sartori <matteo.sartori@t3lab.it>
Cc: Michal Simek <monstr@monstr.eu>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2017-01-11 14:35:12 +00:00
|
|
|
|
|
|
|
spin_lock(&eptdev->queue_lock);
|
|
|
|
skb_queue_tail(&eptdev->queue, skb);
|
|
|
|
spin_unlock(&eptdev->queue_lock);
|
|
|
|
|
|
|
|
/* wake up any blocking processes, waiting for new data */
|
|
|
|
wake_up_interruptible(&eptdev->readq);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int rpmsg_eptdev_open(struct inode *inode, struct file *filp)
|
|
|
|
{
|
|
|
|
struct rpmsg_eptdev *eptdev = cdev_to_eptdev(inode->i_cdev);
|
|
|
|
struct rpmsg_endpoint *ept;
|
|
|
|
struct rpmsg_device *rpdev = eptdev->rpdev;
|
|
|
|
struct device *dev = &eptdev->dev;
|
|
|
|
|
2021-03-11 14:04:13 +00:00
|
|
|
if (eptdev->ept)
|
|
|
|
return -EBUSY;
|
|
|
|
|
rpmsg: Driver for user space endpoint interface
This driver allows rpmsg instances to expose access to rpmsg endpoints
to user space processes. It provides a control interface, allowing
userspace to export endpoints and an endpoint interface for each exposed
endpoint.
The implementation is based on prior art by Texas Instrument, Google,
PetaLogix and was derived from a FreeRTOS performance statistics driver
written by Michal Simek.
The control interface provides a "create endpoint" ioctl, which is fed a
name, source and destination address. The three values are used to
create the endpoint, in a backend-specific way, and a rpmsg endpoint
device is created - with the three parameters are available in sysfs for
udev usage.
E.g. to create an endpoint device for one of the Qualcomm SMD channel
related to DIAG one would issue:
struct rpmsg_endpoint_info info = { "DIAG_CNTL", 0, 0 };
int fd = open("/dev/rpmsg_ctrl0", O_RDWR);
ioctl(fd, RPMSG_CREATE_EPT_IOCTL, &info);
Each created endpoint device shows up as an individual character device
in /dev, allowing permission to be controlled on a per-endpoint basis.
The rpmsg endpoint will be created and destroyed following the opening
and closing of the endpoint device, allowing rpmsg backends to open and
close the physical channel, if supported by the wire protocol.
Cc: Marek Novak <marek.novak@nxp.com>
Cc: Matteo Sartori <matteo.sartori@t3lab.it>
Cc: Michal Simek <monstr@monstr.eu>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2017-01-11 14:35:12 +00:00
|
|
|
get_device(dev);
|
|
|
|
|
2022-01-24 10:25:22 +00:00
|
|
|
/*
|
|
|
|
* If the default_ept is set, the rpmsg device default endpoint is used.
|
|
|
|
* Else a new endpoint is created on open that will be destroyed on release.
|
|
|
|
*/
|
|
|
|
if (eptdev->default_ept)
|
|
|
|
ept = eptdev->default_ept;
|
|
|
|
else
|
|
|
|
ept = rpmsg_create_ept(rpdev, rpmsg_ept_cb, eptdev, eptdev->chinfo);
|
|
|
|
|
rpmsg: Driver for user space endpoint interface
This driver allows rpmsg instances to expose access to rpmsg endpoints
to user space processes. It provides a control interface, allowing
userspace to export endpoints and an endpoint interface for each exposed
endpoint.
The implementation is based on prior art by Texas Instrument, Google,
PetaLogix and was derived from a FreeRTOS performance statistics driver
written by Michal Simek.
The control interface provides a "create endpoint" ioctl, which is fed a
name, source and destination address. The three values are used to
create the endpoint, in a backend-specific way, and a rpmsg endpoint
device is created - with the three parameters are available in sysfs for
udev usage.
E.g. to create an endpoint device for one of the Qualcomm SMD channel
related to DIAG one would issue:
struct rpmsg_endpoint_info info = { "DIAG_CNTL", 0, 0 };
int fd = open("/dev/rpmsg_ctrl0", O_RDWR);
ioctl(fd, RPMSG_CREATE_EPT_IOCTL, &info);
Each created endpoint device shows up as an individual character device
in /dev, allowing permission to be controlled on a per-endpoint basis.
The rpmsg endpoint will be created and destroyed following the opening
and closing of the endpoint device, allowing rpmsg backends to open and
close the physical channel, if supported by the wire protocol.
Cc: Marek Novak <marek.novak@nxp.com>
Cc: Matteo Sartori <matteo.sartori@t3lab.it>
Cc: Michal Simek <monstr@monstr.eu>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2017-01-11 14:35:12 +00:00
|
|
|
if (!ept) {
|
|
|
|
dev_err(dev, "failed to open %s\n", eptdev->chinfo.name);
|
|
|
|
put_device(dev);
|
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
|
|
|
|
eptdev->ept = ept;
|
|
|
|
filp->private_data = eptdev;
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int rpmsg_eptdev_release(struct inode *inode, struct file *filp)
|
|
|
|
{
|
|
|
|
struct rpmsg_eptdev *eptdev = cdev_to_eptdev(inode->i_cdev);
|
|
|
|
struct device *dev = &eptdev->dev;
|
|
|
|
|
|
|
|
/* Close the endpoint, if it's not already destroyed by the parent */
|
|
|
|
mutex_lock(&eptdev->ept_lock);
|
|
|
|
if (eptdev->ept) {
|
2022-01-24 10:25:22 +00:00
|
|
|
if (!eptdev->default_ept)
|
|
|
|
rpmsg_destroy_ept(eptdev->ept);
|
rpmsg: Driver for user space endpoint interface
This driver allows rpmsg instances to expose access to rpmsg endpoints
to user space processes. It provides a control interface, allowing
userspace to export endpoints and an endpoint interface for each exposed
endpoint.
The implementation is based on prior art by Texas Instrument, Google,
PetaLogix and was derived from a FreeRTOS performance statistics driver
written by Michal Simek.
The control interface provides a "create endpoint" ioctl, which is fed a
name, source and destination address. The three values are used to
create the endpoint, in a backend-specific way, and a rpmsg endpoint
device is created - with the three parameters are available in sysfs for
udev usage.
E.g. to create an endpoint device for one of the Qualcomm SMD channel
related to DIAG one would issue:
struct rpmsg_endpoint_info info = { "DIAG_CNTL", 0, 0 };
int fd = open("/dev/rpmsg_ctrl0", O_RDWR);
ioctl(fd, RPMSG_CREATE_EPT_IOCTL, &info);
Each created endpoint device shows up as an individual character device
in /dev, allowing permission to be controlled on a per-endpoint basis.
The rpmsg endpoint will be created and destroyed following the opening
and closing of the endpoint device, allowing rpmsg backends to open and
close the physical channel, if supported by the wire protocol.
Cc: Marek Novak <marek.novak@nxp.com>
Cc: Matteo Sartori <matteo.sartori@t3lab.it>
Cc: Michal Simek <monstr@monstr.eu>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2017-01-11 14:35:12 +00:00
|
|
|
eptdev->ept = NULL;
|
|
|
|
}
|
|
|
|
mutex_unlock(&eptdev->ept_lock);
|
|
|
|
|
|
|
|
/* Discard all SKBs */
|
2019-10-29 06:09:14 +00:00
|
|
|
skb_queue_purge(&eptdev->queue);
|
rpmsg: Driver for user space endpoint interface
This driver allows rpmsg instances to expose access to rpmsg endpoints
to user space processes. It provides a control interface, allowing
userspace to export endpoints and an endpoint interface for each exposed
endpoint.
The implementation is based on prior art by Texas Instrument, Google,
PetaLogix and was derived from a FreeRTOS performance statistics driver
written by Michal Simek.
The control interface provides a "create endpoint" ioctl, which is fed a
name, source and destination address. The three values are used to
create the endpoint, in a backend-specific way, and a rpmsg endpoint
device is created - with the three parameters are available in sysfs for
udev usage.
E.g. to create an endpoint device for one of the Qualcomm SMD channel
related to DIAG one would issue:
struct rpmsg_endpoint_info info = { "DIAG_CNTL", 0, 0 };
int fd = open("/dev/rpmsg_ctrl0", O_RDWR);
ioctl(fd, RPMSG_CREATE_EPT_IOCTL, &info);
Each created endpoint device shows up as an individual character device
in /dev, allowing permission to be controlled on a per-endpoint basis.
The rpmsg endpoint will be created and destroyed following the opening
and closing of the endpoint device, allowing rpmsg backends to open and
close the physical channel, if supported by the wire protocol.
Cc: Marek Novak <marek.novak@nxp.com>
Cc: Matteo Sartori <matteo.sartori@t3lab.it>
Cc: Michal Simek <monstr@monstr.eu>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2017-01-11 14:35:12 +00:00
|
|
|
|
|
|
|
put_device(dev);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2018-08-07 07:14:24 +00:00
|
|
|
static ssize_t rpmsg_eptdev_read_iter(struct kiocb *iocb, struct iov_iter *to)
|
rpmsg: Driver for user space endpoint interface
This driver allows rpmsg instances to expose access to rpmsg endpoints
to user space processes. It provides a control interface, allowing
userspace to export endpoints and an endpoint interface for each exposed
endpoint.
The implementation is based on prior art by Texas Instrument, Google,
PetaLogix and was derived from a FreeRTOS performance statistics driver
written by Michal Simek.
The control interface provides a "create endpoint" ioctl, which is fed a
name, source and destination address. The three values are used to
create the endpoint, in a backend-specific way, and a rpmsg endpoint
device is created - with the three parameters are available in sysfs for
udev usage.
E.g. to create an endpoint device for one of the Qualcomm SMD channel
related to DIAG one would issue:
struct rpmsg_endpoint_info info = { "DIAG_CNTL", 0, 0 };
int fd = open("/dev/rpmsg_ctrl0", O_RDWR);
ioctl(fd, RPMSG_CREATE_EPT_IOCTL, &info);
Each created endpoint device shows up as an individual character device
in /dev, allowing permission to be controlled on a per-endpoint basis.
The rpmsg endpoint will be created and destroyed following the opening
and closing of the endpoint device, allowing rpmsg backends to open and
close the physical channel, if supported by the wire protocol.
Cc: Marek Novak <marek.novak@nxp.com>
Cc: Matteo Sartori <matteo.sartori@t3lab.it>
Cc: Michal Simek <monstr@monstr.eu>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2017-01-11 14:35:12 +00:00
|
|
|
{
|
2018-08-07 07:14:24 +00:00
|
|
|
struct file *filp = iocb->ki_filp;
|
rpmsg: Driver for user space endpoint interface
This driver allows rpmsg instances to expose access to rpmsg endpoints
to user space processes. It provides a control interface, allowing
userspace to export endpoints and an endpoint interface for each exposed
endpoint.
The implementation is based on prior art by Texas Instrument, Google,
PetaLogix and was derived from a FreeRTOS performance statistics driver
written by Michal Simek.
The control interface provides a "create endpoint" ioctl, which is fed a
name, source and destination address. The three values are used to
create the endpoint, in a backend-specific way, and a rpmsg endpoint
device is created - with the three parameters are available in sysfs for
udev usage.
E.g. to create an endpoint device for one of the Qualcomm SMD channel
related to DIAG one would issue:
struct rpmsg_endpoint_info info = { "DIAG_CNTL", 0, 0 };
int fd = open("/dev/rpmsg_ctrl0", O_RDWR);
ioctl(fd, RPMSG_CREATE_EPT_IOCTL, &info);
Each created endpoint device shows up as an individual character device
in /dev, allowing permission to be controlled on a per-endpoint basis.
The rpmsg endpoint will be created and destroyed following the opening
and closing of the endpoint device, allowing rpmsg backends to open and
close the physical channel, if supported by the wire protocol.
Cc: Marek Novak <marek.novak@nxp.com>
Cc: Matteo Sartori <matteo.sartori@t3lab.it>
Cc: Michal Simek <monstr@monstr.eu>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2017-01-11 14:35:12 +00:00
|
|
|
struct rpmsg_eptdev *eptdev = filp->private_data;
|
|
|
|
unsigned long flags;
|
|
|
|
struct sk_buff *skb;
|
|
|
|
int use;
|
|
|
|
|
|
|
|
if (!eptdev->ept)
|
|
|
|
return -EPIPE;
|
|
|
|
|
|
|
|
spin_lock_irqsave(&eptdev->queue_lock, flags);
|
|
|
|
|
|
|
|
/* Wait for data in the queue */
|
|
|
|
if (skb_queue_empty(&eptdev->queue)) {
|
|
|
|
spin_unlock_irqrestore(&eptdev->queue_lock, flags);
|
|
|
|
|
|
|
|
if (filp->f_flags & O_NONBLOCK)
|
|
|
|
return -EAGAIN;
|
|
|
|
|
|
|
|
/* Wait until we get data or the endpoint goes away */
|
|
|
|
if (wait_event_interruptible(eptdev->readq,
|
|
|
|
!skb_queue_empty(&eptdev->queue) ||
|
|
|
|
!eptdev->ept))
|
|
|
|
return -ERESTARTSYS;
|
|
|
|
|
|
|
|
/* We lost the endpoint while waiting */
|
|
|
|
if (!eptdev->ept)
|
|
|
|
return -EPIPE;
|
|
|
|
|
|
|
|
spin_lock_irqsave(&eptdev->queue_lock, flags);
|
|
|
|
}
|
|
|
|
|
|
|
|
skb = skb_dequeue(&eptdev->queue);
|
2017-01-21 04:53:40 +00:00
|
|
|
spin_unlock_irqrestore(&eptdev->queue_lock, flags);
|
rpmsg: Driver for user space endpoint interface
This driver allows rpmsg instances to expose access to rpmsg endpoints
to user space processes. It provides a control interface, allowing
userspace to export endpoints and an endpoint interface for each exposed
endpoint.
The implementation is based on prior art by Texas Instrument, Google,
PetaLogix and was derived from a FreeRTOS performance statistics driver
written by Michal Simek.
The control interface provides a "create endpoint" ioctl, which is fed a
name, source and destination address. The three values are used to
create the endpoint, in a backend-specific way, and a rpmsg endpoint
device is created - with the three parameters are available in sysfs for
udev usage.
E.g. to create an endpoint device for one of the Qualcomm SMD channel
related to DIAG one would issue:
struct rpmsg_endpoint_info info = { "DIAG_CNTL", 0, 0 };
int fd = open("/dev/rpmsg_ctrl0", O_RDWR);
ioctl(fd, RPMSG_CREATE_EPT_IOCTL, &info);
Each created endpoint device shows up as an individual character device
in /dev, allowing permission to be controlled on a per-endpoint basis.
The rpmsg endpoint will be created and destroyed following the opening
and closing of the endpoint device, allowing rpmsg backends to open and
close the physical channel, if supported by the wire protocol.
Cc: Marek Novak <marek.novak@nxp.com>
Cc: Matteo Sartori <matteo.sartori@t3lab.it>
Cc: Michal Simek <monstr@monstr.eu>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2017-01-11 14:35:12 +00:00
|
|
|
if (!skb)
|
|
|
|
return -EFAULT;
|
|
|
|
|
2018-08-07 07:14:24 +00:00
|
|
|
use = min_t(size_t, iov_iter_count(to), skb->len);
|
|
|
|
if (copy_to_iter(skb->data, use, to) != use)
|
rpmsg: Driver for user space endpoint interface
This driver allows rpmsg instances to expose access to rpmsg endpoints
to user space processes. It provides a control interface, allowing
userspace to export endpoints and an endpoint interface for each exposed
endpoint.
The implementation is based on prior art by Texas Instrument, Google,
PetaLogix and was derived from a FreeRTOS performance statistics driver
written by Michal Simek.
The control interface provides a "create endpoint" ioctl, which is fed a
name, source and destination address. The three values are used to
create the endpoint, in a backend-specific way, and a rpmsg endpoint
device is created - with the three parameters are available in sysfs for
udev usage.
E.g. to create an endpoint device for one of the Qualcomm SMD channel
related to DIAG one would issue:
struct rpmsg_endpoint_info info = { "DIAG_CNTL", 0, 0 };
int fd = open("/dev/rpmsg_ctrl0", O_RDWR);
ioctl(fd, RPMSG_CREATE_EPT_IOCTL, &info);
Each created endpoint device shows up as an individual character device
in /dev, allowing permission to be controlled on a per-endpoint basis.
The rpmsg endpoint will be created and destroyed following the opening
and closing of the endpoint device, allowing rpmsg backends to open and
close the physical channel, if supported by the wire protocol.
Cc: Marek Novak <marek.novak@nxp.com>
Cc: Matteo Sartori <matteo.sartori@t3lab.it>
Cc: Michal Simek <monstr@monstr.eu>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2017-01-11 14:35:12 +00:00
|
|
|
use = -EFAULT;
|
|
|
|
|
|
|
|
kfree_skb(skb);
|
|
|
|
|
|
|
|
return use;
|
|
|
|
}
|
|
|
|
|
2018-08-07 07:14:24 +00:00
|
|
|
static ssize_t rpmsg_eptdev_write_iter(struct kiocb *iocb,
|
|
|
|
struct iov_iter *from)
|
rpmsg: Driver for user space endpoint interface
This driver allows rpmsg instances to expose access to rpmsg endpoints
to user space processes. It provides a control interface, allowing
userspace to export endpoints and an endpoint interface for each exposed
endpoint.
The implementation is based on prior art by Texas Instrument, Google,
PetaLogix and was derived from a FreeRTOS performance statistics driver
written by Michal Simek.
The control interface provides a "create endpoint" ioctl, which is fed a
name, source and destination address. The three values are used to
create the endpoint, in a backend-specific way, and a rpmsg endpoint
device is created - with the three parameters are available in sysfs for
udev usage.
E.g. to create an endpoint device for one of the Qualcomm SMD channel
related to DIAG one would issue:
struct rpmsg_endpoint_info info = { "DIAG_CNTL", 0, 0 };
int fd = open("/dev/rpmsg_ctrl0", O_RDWR);
ioctl(fd, RPMSG_CREATE_EPT_IOCTL, &info);
Each created endpoint device shows up as an individual character device
in /dev, allowing permission to be controlled on a per-endpoint basis.
The rpmsg endpoint will be created and destroyed following the opening
and closing of the endpoint device, allowing rpmsg backends to open and
close the physical channel, if supported by the wire protocol.
Cc: Marek Novak <marek.novak@nxp.com>
Cc: Matteo Sartori <matteo.sartori@t3lab.it>
Cc: Michal Simek <monstr@monstr.eu>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2017-01-11 14:35:12 +00:00
|
|
|
{
|
2018-08-07 07:14:24 +00:00
|
|
|
struct file *filp = iocb->ki_filp;
|
rpmsg: Driver for user space endpoint interface
This driver allows rpmsg instances to expose access to rpmsg endpoints
to user space processes. It provides a control interface, allowing
userspace to export endpoints and an endpoint interface for each exposed
endpoint.
The implementation is based on prior art by Texas Instrument, Google,
PetaLogix and was derived from a FreeRTOS performance statistics driver
written by Michal Simek.
The control interface provides a "create endpoint" ioctl, which is fed a
name, source and destination address. The three values are used to
create the endpoint, in a backend-specific way, and a rpmsg endpoint
device is created - with the three parameters are available in sysfs for
udev usage.
E.g. to create an endpoint device for one of the Qualcomm SMD channel
related to DIAG one would issue:
struct rpmsg_endpoint_info info = { "DIAG_CNTL", 0, 0 };
int fd = open("/dev/rpmsg_ctrl0", O_RDWR);
ioctl(fd, RPMSG_CREATE_EPT_IOCTL, &info);
Each created endpoint device shows up as an individual character device
in /dev, allowing permission to be controlled on a per-endpoint basis.
The rpmsg endpoint will be created and destroyed following the opening
and closing of the endpoint device, allowing rpmsg backends to open and
close the physical channel, if supported by the wire protocol.
Cc: Marek Novak <marek.novak@nxp.com>
Cc: Matteo Sartori <matteo.sartori@t3lab.it>
Cc: Michal Simek <monstr@monstr.eu>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2017-01-11 14:35:12 +00:00
|
|
|
struct rpmsg_eptdev *eptdev = filp->private_data;
|
2018-08-07 07:14:24 +00:00
|
|
|
size_t len = iov_iter_count(from);
|
rpmsg: Driver for user space endpoint interface
This driver allows rpmsg instances to expose access to rpmsg endpoints
to user space processes. It provides a control interface, allowing
userspace to export endpoints and an endpoint interface for each exposed
endpoint.
The implementation is based on prior art by Texas Instrument, Google,
PetaLogix and was derived from a FreeRTOS performance statistics driver
written by Michal Simek.
The control interface provides a "create endpoint" ioctl, which is fed a
name, source and destination address. The three values are used to
create the endpoint, in a backend-specific way, and a rpmsg endpoint
device is created - with the three parameters are available in sysfs for
udev usage.
E.g. to create an endpoint device for one of the Qualcomm SMD channel
related to DIAG one would issue:
struct rpmsg_endpoint_info info = { "DIAG_CNTL", 0, 0 };
int fd = open("/dev/rpmsg_ctrl0", O_RDWR);
ioctl(fd, RPMSG_CREATE_EPT_IOCTL, &info);
Each created endpoint device shows up as an individual character device
in /dev, allowing permission to be controlled on a per-endpoint basis.
The rpmsg endpoint will be created and destroyed following the opening
and closing of the endpoint device, allowing rpmsg backends to open and
close the physical channel, if supported by the wire protocol.
Cc: Marek Novak <marek.novak@nxp.com>
Cc: Matteo Sartori <matteo.sartori@t3lab.it>
Cc: Michal Simek <monstr@monstr.eu>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2017-01-11 14:35:12 +00:00
|
|
|
void *kbuf;
|
|
|
|
int ret;
|
|
|
|
|
2018-08-07 07:14:24 +00:00
|
|
|
kbuf = kzalloc(len, GFP_KERNEL);
|
|
|
|
if (!kbuf)
|
|
|
|
return -ENOMEM;
|
|
|
|
|
2019-09-17 03:31:23 +00:00
|
|
|
if (!copy_from_iter_full(kbuf, len, from)) {
|
|
|
|
ret = -EFAULT;
|
|
|
|
goto free_kbuf;
|
|
|
|
}
|
rpmsg: Driver for user space endpoint interface
This driver allows rpmsg instances to expose access to rpmsg endpoints
to user space processes. It provides a control interface, allowing
userspace to export endpoints and an endpoint interface for each exposed
endpoint.
The implementation is based on prior art by Texas Instrument, Google,
PetaLogix and was derived from a FreeRTOS performance statistics driver
written by Michal Simek.
The control interface provides a "create endpoint" ioctl, which is fed a
name, source and destination address. The three values are used to
create the endpoint, in a backend-specific way, and a rpmsg endpoint
device is created - with the three parameters are available in sysfs for
udev usage.
E.g. to create an endpoint device for one of the Qualcomm SMD channel
related to DIAG one would issue:
struct rpmsg_endpoint_info info = { "DIAG_CNTL", 0, 0 };
int fd = open("/dev/rpmsg_ctrl0", O_RDWR);
ioctl(fd, RPMSG_CREATE_EPT_IOCTL, &info);
Each created endpoint device shows up as an individual character device
in /dev, allowing permission to be controlled on a per-endpoint basis.
The rpmsg endpoint will be created and destroyed following the opening
and closing of the endpoint device, allowing rpmsg backends to open and
close the physical channel, if supported by the wire protocol.
Cc: Marek Novak <marek.novak@nxp.com>
Cc: Matteo Sartori <matteo.sartori@t3lab.it>
Cc: Michal Simek <monstr@monstr.eu>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2017-01-11 14:35:12 +00:00
|
|
|
|
|
|
|
if (mutex_lock_interruptible(&eptdev->ept_lock)) {
|
|
|
|
ret = -ERESTARTSYS;
|
|
|
|
goto free_kbuf;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (!eptdev->ept) {
|
|
|
|
ret = -EPIPE;
|
|
|
|
goto unlock_eptdev;
|
|
|
|
}
|
|
|
|
|
2022-03-13 02:45:41 +00:00
|
|
|
if (filp->f_flags & O_NONBLOCK) {
|
2021-03-11 14:04:11 +00:00
|
|
|
ret = rpmsg_trysendto(eptdev->ept, kbuf, len, eptdev->chinfo.dst);
|
2022-03-13 02:45:41 +00:00
|
|
|
if (ret == -ENOMEM)
|
|
|
|
ret = -EAGAIN;
|
|
|
|
} else {
|
2021-03-11 14:04:11 +00:00
|
|
|
ret = rpmsg_sendto(eptdev->ept, kbuf, len, eptdev->chinfo.dst);
|
2022-03-13 02:45:41 +00:00
|
|
|
}
|
rpmsg: Driver for user space endpoint interface
This driver allows rpmsg instances to expose access to rpmsg endpoints
to user space processes. It provides a control interface, allowing
userspace to export endpoints and an endpoint interface for each exposed
endpoint.
The implementation is based on prior art by Texas Instrument, Google,
PetaLogix and was derived from a FreeRTOS performance statistics driver
written by Michal Simek.
The control interface provides a "create endpoint" ioctl, which is fed a
name, source and destination address. The three values are used to
create the endpoint, in a backend-specific way, and a rpmsg endpoint
device is created - with the three parameters are available in sysfs for
udev usage.
E.g. to create an endpoint device for one of the Qualcomm SMD channel
related to DIAG one would issue:
struct rpmsg_endpoint_info info = { "DIAG_CNTL", 0, 0 };
int fd = open("/dev/rpmsg_ctrl0", O_RDWR);
ioctl(fd, RPMSG_CREATE_EPT_IOCTL, &info);
Each created endpoint device shows up as an individual character device
in /dev, allowing permission to be controlled on a per-endpoint basis.
The rpmsg endpoint will be created and destroyed following the opening
and closing of the endpoint device, allowing rpmsg backends to open and
close the physical channel, if supported by the wire protocol.
Cc: Marek Novak <marek.novak@nxp.com>
Cc: Matteo Sartori <matteo.sartori@t3lab.it>
Cc: Michal Simek <monstr@monstr.eu>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2017-01-11 14:35:12 +00:00
|
|
|
|
|
|
|
unlock_eptdev:
|
|
|
|
mutex_unlock(&eptdev->ept_lock);
|
|
|
|
|
|
|
|
free_kbuf:
|
|
|
|
kfree(kbuf);
|
|
|
|
return ret < 0 ? ret : len;
|
|
|
|
}
|
|
|
|
|
2017-07-03 10:39:46 +00:00
|
|
|
static __poll_t rpmsg_eptdev_poll(struct file *filp, poll_table *wait)
|
rpmsg: Driver for user space endpoint interface
This driver allows rpmsg instances to expose access to rpmsg endpoints
to user space processes. It provides a control interface, allowing
userspace to export endpoints and an endpoint interface for each exposed
endpoint.
The implementation is based on prior art by Texas Instrument, Google,
PetaLogix and was derived from a FreeRTOS performance statistics driver
written by Michal Simek.
The control interface provides a "create endpoint" ioctl, which is fed a
name, source and destination address. The three values are used to
create the endpoint, in a backend-specific way, and a rpmsg endpoint
device is created - with the three parameters are available in sysfs for
udev usage.
E.g. to create an endpoint device for one of the Qualcomm SMD channel
related to DIAG one would issue:
struct rpmsg_endpoint_info info = { "DIAG_CNTL", 0, 0 };
int fd = open("/dev/rpmsg_ctrl0", O_RDWR);
ioctl(fd, RPMSG_CREATE_EPT_IOCTL, &info);
Each created endpoint device shows up as an individual character device
in /dev, allowing permission to be controlled on a per-endpoint basis.
The rpmsg endpoint will be created and destroyed following the opening
and closing of the endpoint device, allowing rpmsg backends to open and
close the physical channel, if supported by the wire protocol.
Cc: Marek Novak <marek.novak@nxp.com>
Cc: Matteo Sartori <matteo.sartori@t3lab.it>
Cc: Michal Simek <monstr@monstr.eu>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2017-01-11 14:35:12 +00:00
|
|
|
{
|
|
|
|
struct rpmsg_eptdev *eptdev = filp->private_data;
|
2017-07-03 10:39:46 +00:00
|
|
|
__poll_t mask = 0;
|
rpmsg: Driver for user space endpoint interface
This driver allows rpmsg instances to expose access to rpmsg endpoints
to user space processes. It provides a control interface, allowing
userspace to export endpoints and an endpoint interface for each exposed
endpoint.
The implementation is based on prior art by Texas Instrument, Google,
PetaLogix and was derived from a FreeRTOS performance statistics driver
written by Michal Simek.
The control interface provides a "create endpoint" ioctl, which is fed a
name, source and destination address. The three values are used to
create the endpoint, in a backend-specific way, and a rpmsg endpoint
device is created - with the three parameters are available in sysfs for
udev usage.
E.g. to create an endpoint device for one of the Qualcomm SMD channel
related to DIAG one would issue:
struct rpmsg_endpoint_info info = { "DIAG_CNTL", 0, 0 };
int fd = open("/dev/rpmsg_ctrl0", O_RDWR);
ioctl(fd, RPMSG_CREATE_EPT_IOCTL, &info);
Each created endpoint device shows up as an individual character device
in /dev, allowing permission to be controlled on a per-endpoint basis.
The rpmsg endpoint will be created and destroyed following the opening
and closing of the endpoint device, allowing rpmsg backends to open and
close the physical channel, if supported by the wire protocol.
Cc: Marek Novak <marek.novak@nxp.com>
Cc: Matteo Sartori <matteo.sartori@t3lab.it>
Cc: Michal Simek <monstr@monstr.eu>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2017-01-11 14:35:12 +00:00
|
|
|
|
|
|
|
if (!eptdev->ept)
|
2018-02-11 22:34:03 +00:00
|
|
|
return EPOLLERR;
|
rpmsg: Driver for user space endpoint interface
This driver allows rpmsg instances to expose access to rpmsg endpoints
to user space processes. It provides a control interface, allowing
userspace to export endpoints and an endpoint interface for each exposed
endpoint.
The implementation is based on prior art by Texas Instrument, Google,
PetaLogix and was derived from a FreeRTOS performance statistics driver
written by Michal Simek.
The control interface provides a "create endpoint" ioctl, which is fed a
name, source and destination address. The three values are used to
create the endpoint, in a backend-specific way, and a rpmsg endpoint
device is created - with the three parameters are available in sysfs for
udev usage.
E.g. to create an endpoint device for one of the Qualcomm SMD channel
related to DIAG one would issue:
struct rpmsg_endpoint_info info = { "DIAG_CNTL", 0, 0 };
int fd = open("/dev/rpmsg_ctrl0", O_RDWR);
ioctl(fd, RPMSG_CREATE_EPT_IOCTL, &info);
Each created endpoint device shows up as an individual character device
in /dev, allowing permission to be controlled on a per-endpoint basis.
The rpmsg endpoint will be created and destroyed following the opening
and closing of the endpoint device, allowing rpmsg backends to open and
close the physical channel, if supported by the wire protocol.
Cc: Marek Novak <marek.novak@nxp.com>
Cc: Matteo Sartori <matteo.sartori@t3lab.it>
Cc: Michal Simek <monstr@monstr.eu>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2017-01-11 14:35:12 +00:00
|
|
|
|
|
|
|
poll_wait(filp, &eptdev->readq, wait);
|
|
|
|
|
|
|
|
if (!skb_queue_empty(&eptdev->queue))
|
2018-02-11 22:34:03 +00:00
|
|
|
mask |= EPOLLIN | EPOLLRDNORM;
|
rpmsg: Driver for user space endpoint interface
This driver allows rpmsg instances to expose access to rpmsg endpoints
to user space processes. It provides a control interface, allowing
userspace to export endpoints and an endpoint interface for each exposed
endpoint.
The implementation is based on prior art by Texas Instrument, Google,
PetaLogix and was derived from a FreeRTOS performance statistics driver
written by Michal Simek.
The control interface provides a "create endpoint" ioctl, which is fed a
name, source and destination address. The three values are used to
create the endpoint, in a backend-specific way, and a rpmsg endpoint
device is created - with the three parameters are available in sysfs for
udev usage.
E.g. to create an endpoint device for one of the Qualcomm SMD channel
related to DIAG one would issue:
struct rpmsg_endpoint_info info = { "DIAG_CNTL", 0, 0 };
int fd = open("/dev/rpmsg_ctrl0", O_RDWR);
ioctl(fd, RPMSG_CREATE_EPT_IOCTL, &info);
Each created endpoint device shows up as an individual character device
in /dev, allowing permission to be controlled on a per-endpoint basis.
The rpmsg endpoint will be created and destroyed following the opening
and closing of the endpoint device, allowing rpmsg backends to open and
close the physical channel, if supported by the wire protocol.
Cc: Marek Novak <marek.novak@nxp.com>
Cc: Matteo Sartori <matteo.sartori@t3lab.it>
Cc: Michal Simek <monstr@monstr.eu>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2017-01-11 14:35:12 +00:00
|
|
|
|
|
|
|
mask |= rpmsg_poll(eptdev->ept, filp, wait);
|
|
|
|
|
|
|
|
return mask;
|
|
|
|
}
|
|
|
|
|
|
|
|
static long rpmsg_eptdev_ioctl(struct file *fp, unsigned int cmd,
|
|
|
|
unsigned long arg)
|
|
|
|
{
|
|
|
|
struct rpmsg_eptdev *eptdev = fp->private_data;
|
|
|
|
|
|
|
|
if (cmd != RPMSG_DESTROY_EPT_IOCTL)
|
|
|
|
return -EINVAL;
|
|
|
|
|
2022-01-24 10:25:22 +00:00
|
|
|
/* Don't allow to destroy a default endpoint. */
|
|
|
|
if (eptdev->default_ept)
|
|
|
|
return -EINVAL;
|
|
|
|
|
2022-01-24 10:25:14 +00:00
|
|
|
return rpmsg_chrdev_eptdev_destroy(&eptdev->dev, NULL);
|
rpmsg: Driver for user space endpoint interface
This driver allows rpmsg instances to expose access to rpmsg endpoints
to user space processes. It provides a control interface, allowing
userspace to export endpoints and an endpoint interface for each exposed
endpoint.
The implementation is based on prior art by Texas Instrument, Google,
PetaLogix and was derived from a FreeRTOS performance statistics driver
written by Michal Simek.
The control interface provides a "create endpoint" ioctl, which is fed a
name, source and destination address. The three values are used to
create the endpoint, in a backend-specific way, and a rpmsg endpoint
device is created - with the three parameters are available in sysfs for
udev usage.
E.g. to create an endpoint device for one of the Qualcomm SMD channel
related to DIAG one would issue:
struct rpmsg_endpoint_info info = { "DIAG_CNTL", 0, 0 };
int fd = open("/dev/rpmsg_ctrl0", O_RDWR);
ioctl(fd, RPMSG_CREATE_EPT_IOCTL, &info);
Each created endpoint device shows up as an individual character device
in /dev, allowing permission to be controlled on a per-endpoint basis.
The rpmsg endpoint will be created and destroyed following the opening
and closing of the endpoint device, allowing rpmsg backends to open and
close the physical channel, if supported by the wire protocol.
Cc: Marek Novak <marek.novak@nxp.com>
Cc: Matteo Sartori <matteo.sartori@t3lab.it>
Cc: Michal Simek <monstr@monstr.eu>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2017-01-11 14:35:12 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
static const struct file_operations rpmsg_eptdev_fops = {
|
|
|
|
.owner = THIS_MODULE,
|
|
|
|
.open = rpmsg_eptdev_open,
|
|
|
|
.release = rpmsg_eptdev_release,
|
2018-08-07 07:14:24 +00:00
|
|
|
.read_iter = rpmsg_eptdev_read_iter,
|
|
|
|
.write_iter = rpmsg_eptdev_write_iter,
|
rpmsg: Driver for user space endpoint interface
This driver allows rpmsg instances to expose access to rpmsg endpoints
to user space processes. It provides a control interface, allowing
userspace to export endpoints and an endpoint interface for each exposed
endpoint.
The implementation is based on prior art by Texas Instrument, Google,
PetaLogix and was derived from a FreeRTOS performance statistics driver
written by Michal Simek.
The control interface provides a "create endpoint" ioctl, which is fed a
name, source and destination address. The three values are used to
create the endpoint, in a backend-specific way, and a rpmsg endpoint
device is created - with the three parameters are available in sysfs for
udev usage.
E.g. to create an endpoint device for one of the Qualcomm SMD channel
related to DIAG one would issue:
struct rpmsg_endpoint_info info = { "DIAG_CNTL", 0, 0 };
int fd = open("/dev/rpmsg_ctrl0", O_RDWR);
ioctl(fd, RPMSG_CREATE_EPT_IOCTL, &info);
Each created endpoint device shows up as an individual character device
in /dev, allowing permission to be controlled on a per-endpoint basis.
The rpmsg endpoint will be created and destroyed following the opening
and closing of the endpoint device, allowing rpmsg backends to open and
close the physical channel, if supported by the wire protocol.
Cc: Marek Novak <marek.novak@nxp.com>
Cc: Matteo Sartori <matteo.sartori@t3lab.it>
Cc: Michal Simek <monstr@monstr.eu>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2017-01-11 14:35:12 +00:00
|
|
|
.poll = rpmsg_eptdev_poll,
|
|
|
|
.unlocked_ioctl = rpmsg_eptdev_ioctl,
|
2018-09-11 19:59:08 +00:00
|
|
|
.compat_ioctl = compat_ptr_ioctl,
|
rpmsg: Driver for user space endpoint interface
This driver allows rpmsg instances to expose access to rpmsg endpoints
to user space processes. It provides a control interface, allowing
userspace to export endpoints and an endpoint interface for each exposed
endpoint.
The implementation is based on prior art by Texas Instrument, Google,
PetaLogix and was derived from a FreeRTOS performance statistics driver
written by Michal Simek.
The control interface provides a "create endpoint" ioctl, which is fed a
name, source and destination address. The three values are used to
create the endpoint, in a backend-specific way, and a rpmsg endpoint
device is created - with the three parameters are available in sysfs for
udev usage.
E.g. to create an endpoint device for one of the Qualcomm SMD channel
related to DIAG one would issue:
struct rpmsg_endpoint_info info = { "DIAG_CNTL", 0, 0 };
int fd = open("/dev/rpmsg_ctrl0", O_RDWR);
ioctl(fd, RPMSG_CREATE_EPT_IOCTL, &info);
Each created endpoint device shows up as an individual character device
in /dev, allowing permission to be controlled on a per-endpoint basis.
The rpmsg endpoint will be created and destroyed following the opening
and closing of the endpoint device, allowing rpmsg backends to open and
close the physical channel, if supported by the wire protocol.
Cc: Marek Novak <marek.novak@nxp.com>
Cc: Matteo Sartori <matteo.sartori@t3lab.it>
Cc: Michal Simek <monstr@monstr.eu>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2017-01-11 14:35:12 +00:00
|
|
|
};
|
|
|
|
|
|
|
|
static ssize_t name_show(struct device *dev, struct device_attribute *attr,
|
|
|
|
char *buf)
|
|
|
|
{
|
|
|
|
struct rpmsg_eptdev *eptdev = dev_get_drvdata(dev);
|
|
|
|
|
|
|
|
return sprintf(buf, "%s\n", eptdev->chinfo.name);
|
|
|
|
}
|
|
|
|
static DEVICE_ATTR_RO(name);
|
|
|
|
|
|
|
|
static ssize_t src_show(struct device *dev, struct device_attribute *attr,
|
|
|
|
char *buf)
|
|
|
|
{
|
|
|
|
struct rpmsg_eptdev *eptdev = dev_get_drvdata(dev);
|
|
|
|
|
|
|
|
return sprintf(buf, "%d\n", eptdev->chinfo.src);
|
|
|
|
}
|
|
|
|
static DEVICE_ATTR_RO(src);
|
|
|
|
|
|
|
|
static ssize_t dst_show(struct device *dev, struct device_attribute *attr,
|
|
|
|
char *buf)
|
|
|
|
{
|
|
|
|
struct rpmsg_eptdev *eptdev = dev_get_drvdata(dev);
|
|
|
|
|
|
|
|
return sprintf(buf, "%d\n", eptdev->chinfo.dst);
|
|
|
|
}
|
|
|
|
static DEVICE_ATTR_RO(dst);
|
|
|
|
|
|
|
|
static struct attribute *rpmsg_eptdev_attrs[] = {
|
|
|
|
&dev_attr_name.attr,
|
|
|
|
&dev_attr_src.attr,
|
|
|
|
&dev_attr_dst.attr,
|
|
|
|
NULL
|
|
|
|
};
|
|
|
|
ATTRIBUTE_GROUPS(rpmsg_eptdev);
|
|
|
|
|
|
|
|
static void rpmsg_eptdev_release_device(struct device *dev)
|
|
|
|
{
|
|
|
|
struct rpmsg_eptdev *eptdev = dev_to_eptdev(dev);
|
|
|
|
|
|
|
|
ida_simple_remove(&rpmsg_ept_ida, dev->id);
|
|
|
|
ida_simple_remove(&rpmsg_minor_ida, MINOR(eptdev->dev.devt));
|
|
|
|
kfree(eptdev);
|
|
|
|
}
|
|
|
|
|
2022-01-24 10:25:21 +00:00
|
|
|
static struct rpmsg_eptdev *rpmsg_chrdev_eptdev_alloc(struct rpmsg_device *rpdev,
|
|
|
|
struct device *parent)
|
rpmsg: Driver for user space endpoint interface
This driver allows rpmsg instances to expose access to rpmsg endpoints
to user space processes. It provides a control interface, allowing
userspace to export endpoints and an endpoint interface for each exposed
endpoint.
The implementation is based on prior art by Texas Instrument, Google,
PetaLogix and was derived from a FreeRTOS performance statistics driver
written by Michal Simek.
The control interface provides a "create endpoint" ioctl, which is fed a
name, source and destination address. The three values are used to
create the endpoint, in a backend-specific way, and a rpmsg endpoint
device is created - with the three parameters are available in sysfs for
udev usage.
E.g. to create an endpoint device for one of the Qualcomm SMD channel
related to DIAG one would issue:
struct rpmsg_endpoint_info info = { "DIAG_CNTL", 0, 0 };
int fd = open("/dev/rpmsg_ctrl0", O_RDWR);
ioctl(fd, RPMSG_CREATE_EPT_IOCTL, &info);
Each created endpoint device shows up as an individual character device
in /dev, allowing permission to be controlled on a per-endpoint basis.
The rpmsg endpoint will be created and destroyed following the opening
and closing of the endpoint device, allowing rpmsg backends to open and
close the physical channel, if supported by the wire protocol.
Cc: Marek Novak <marek.novak@nxp.com>
Cc: Matteo Sartori <matteo.sartori@t3lab.it>
Cc: Michal Simek <monstr@monstr.eu>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2017-01-11 14:35:12 +00:00
|
|
|
{
|
|
|
|
struct rpmsg_eptdev *eptdev;
|
|
|
|
struct device *dev;
|
|
|
|
|
|
|
|
eptdev = kzalloc(sizeof(*eptdev), GFP_KERNEL);
|
|
|
|
if (!eptdev)
|
2022-01-24 10:25:21 +00:00
|
|
|
return ERR_PTR(-ENOMEM);
|
rpmsg: Driver for user space endpoint interface
This driver allows rpmsg instances to expose access to rpmsg endpoints
to user space processes. It provides a control interface, allowing
userspace to export endpoints and an endpoint interface for each exposed
endpoint.
The implementation is based on prior art by Texas Instrument, Google,
PetaLogix and was derived from a FreeRTOS performance statistics driver
written by Michal Simek.
The control interface provides a "create endpoint" ioctl, which is fed a
name, source and destination address. The three values are used to
create the endpoint, in a backend-specific way, and a rpmsg endpoint
device is created - with the three parameters are available in sysfs for
udev usage.
E.g. to create an endpoint device for one of the Qualcomm SMD channel
related to DIAG one would issue:
struct rpmsg_endpoint_info info = { "DIAG_CNTL", 0, 0 };
int fd = open("/dev/rpmsg_ctrl0", O_RDWR);
ioctl(fd, RPMSG_CREATE_EPT_IOCTL, &info);
Each created endpoint device shows up as an individual character device
in /dev, allowing permission to be controlled on a per-endpoint basis.
The rpmsg endpoint will be created and destroyed following the opening
and closing of the endpoint device, allowing rpmsg backends to open and
close the physical channel, if supported by the wire protocol.
Cc: Marek Novak <marek.novak@nxp.com>
Cc: Matteo Sartori <matteo.sartori@t3lab.it>
Cc: Michal Simek <monstr@monstr.eu>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2017-01-11 14:35:12 +00:00
|
|
|
|
|
|
|
dev = &eptdev->dev;
|
|
|
|
eptdev->rpdev = rpdev;
|
|
|
|
|
|
|
|
mutex_init(&eptdev->ept_lock);
|
|
|
|
spin_lock_init(&eptdev->queue_lock);
|
|
|
|
skb_queue_head_init(&eptdev->queue);
|
|
|
|
init_waitqueue_head(&eptdev->readq);
|
|
|
|
|
|
|
|
device_initialize(dev);
|
|
|
|
dev->class = rpmsg_class;
|
2022-01-24 10:25:14 +00:00
|
|
|
dev->parent = parent;
|
rpmsg: Driver for user space endpoint interface
This driver allows rpmsg instances to expose access to rpmsg endpoints
to user space processes. It provides a control interface, allowing
userspace to export endpoints and an endpoint interface for each exposed
endpoint.
The implementation is based on prior art by Texas Instrument, Google,
PetaLogix and was derived from a FreeRTOS performance statistics driver
written by Michal Simek.
The control interface provides a "create endpoint" ioctl, which is fed a
name, source and destination address. The three values are used to
create the endpoint, in a backend-specific way, and a rpmsg endpoint
device is created - with the three parameters are available in sysfs for
udev usage.
E.g. to create an endpoint device for one of the Qualcomm SMD channel
related to DIAG one would issue:
struct rpmsg_endpoint_info info = { "DIAG_CNTL", 0, 0 };
int fd = open("/dev/rpmsg_ctrl0", O_RDWR);
ioctl(fd, RPMSG_CREATE_EPT_IOCTL, &info);
Each created endpoint device shows up as an individual character device
in /dev, allowing permission to be controlled on a per-endpoint basis.
The rpmsg endpoint will be created and destroyed following the opening
and closing of the endpoint device, allowing rpmsg backends to open and
close the physical channel, if supported by the wire protocol.
Cc: Marek Novak <marek.novak@nxp.com>
Cc: Matteo Sartori <matteo.sartori@t3lab.it>
Cc: Michal Simek <monstr@monstr.eu>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2017-01-11 14:35:12 +00:00
|
|
|
dev->groups = rpmsg_eptdev_groups;
|
|
|
|
dev_set_drvdata(dev, eptdev);
|
|
|
|
|
|
|
|
cdev_init(&eptdev->cdev, &rpmsg_eptdev_fops);
|
|
|
|
eptdev->cdev.owner = THIS_MODULE;
|
|
|
|
|
2022-01-24 10:25:21 +00:00
|
|
|
return eptdev;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int rpmsg_chrdev_eptdev_add(struct rpmsg_eptdev *eptdev, struct rpmsg_channel_info chinfo)
|
|
|
|
{
|
|
|
|
struct device *dev = &eptdev->dev;
|
|
|
|
int ret;
|
|
|
|
|
|
|
|
eptdev->chinfo = chinfo;
|
|
|
|
|
rpmsg: Driver for user space endpoint interface
This driver allows rpmsg instances to expose access to rpmsg endpoints
to user space processes. It provides a control interface, allowing
userspace to export endpoints and an endpoint interface for each exposed
endpoint.
The implementation is based on prior art by Texas Instrument, Google,
PetaLogix and was derived from a FreeRTOS performance statistics driver
written by Michal Simek.
The control interface provides a "create endpoint" ioctl, which is fed a
name, source and destination address. The three values are used to
create the endpoint, in a backend-specific way, and a rpmsg endpoint
device is created - with the three parameters are available in sysfs for
udev usage.
E.g. to create an endpoint device for one of the Qualcomm SMD channel
related to DIAG one would issue:
struct rpmsg_endpoint_info info = { "DIAG_CNTL", 0, 0 };
int fd = open("/dev/rpmsg_ctrl0", O_RDWR);
ioctl(fd, RPMSG_CREATE_EPT_IOCTL, &info);
Each created endpoint device shows up as an individual character device
in /dev, allowing permission to be controlled on a per-endpoint basis.
The rpmsg endpoint will be created and destroyed following the opening
and closing of the endpoint device, allowing rpmsg backends to open and
close the physical channel, if supported by the wire protocol.
Cc: Marek Novak <marek.novak@nxp.com>
Cc: Matteo Sartori <matteo.sartori@t3lab.it>
Cc: Michal Simek <monstr@monstr.eu>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2017-01-11 14:35:12 +00:00
|
|
|
ret = ida_simple_get(&rpmsg_minor_ida, 0, RPMSG_DEV_MAX, GFP_KERNEL);
|
|
|
|
if (ret < 0)
|
|
|
|
goto free_eptdev;
|
|
|
|
dev->devt = MKDEV(MAJOR(rpmsg_major), ret);
|
|
|
|
|
|
|
|
ret = ida_simple_get(&rpmsg_ept_ida, 0, 0, GFP_KERNEL);
|
|
|
|
if (ret < 0)
|
|
|
|
goto free_minor_ida;
|
|
|
|
dev->id = ret;
|
|
|
|
dev_set_name(dev, "rpmsg%d", ret);
|
|
|
|
|
2022-01-10 18:47:37 +00:00
|
|
|
ret = cdev_device_add(&eptdev->cdev, &eptdev->dev);
|
rpmsg: Driver for user space endpoint interface
This driver allows rpmsg instances to expose access to rpmsg endpoints
to user space processes. It provides a control interface, allowing
userspace to export endpoints and an endpoint interface for each exposed
endpoint.
The implementation is based on prior art by Texas Instrument, Google,
PetaLogix and was derived from a FreeRTOS performance statistics driver
written by Michal Simek.
The control interface provides a "create endpoint" ioctl, which is fed a
name, source and destination address. The three values are used to
create the endpoint, in a backend-specific way, and a rpmsg endpoint
device is created - with the three parameters are available in sysfs for
udev usage.
E.g. to create an endpoint device for one of the Qualcomm SMD channel
related to DIAG one would issue:
struct rpmsg_endpoint_info info = { "DIAG_CNTL", 0, 0 };
int fd = open("/dev/rpmsg_ctrl0", O_RDWR);
ioctl(fd, RPMSG_CREATE_EPT_IOCTL, &info);
Each created endpoint device shows up as an individual character device
in /dev, allowing permission to be controlled on a per-endpoint basis.
The rpmsg endpoint will be created and destroyed following the opening
and closing of the endpoint device, allowing rpmsg backends to open and
close the physical channel, if supported by the wire protocol.
Cc: Marek Novak <marek.novak@nxp.com>
Cc: Matteo Sartori <matteo.sartori@t3lab.it>
Cc: Michal Simek <monstr@monstr.eu>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2017-01-11 14:35:12 +00:00
|
|
|
if (ret)
|
|
|
|
goto free_ept_ida;
|
|
|
|
|
|
|
|
/* We can now rely on the release function for cleanup */
|
|
|
|
dev->release = rpmsg_eptdev_release_device;
|
|
|
|
|
|
|
|
return ret;
|
|
|
|
|
|
|
|
free_ept_ida:
|
|
|
|
ida_simple_remove(&rpmsg_ept_ida, dev->id);
|
|
|
|
free_minor_ida:
|
|
|
|
ida_simple_remove(&rpmsg_minor_ida, MINOR(dev->devt));
|
|
|
|
free_eptdev:
|
|
|
|
put_device(dev);
|
|
|
|
kfree(eptdev);
|
|
|
|
|
|
|
|
return ret;
|
|
|
|
}
|
2022-01-24 10:25:21 +00:00
|
|
|
|
|
|
|
int rpmsg_chrdev_eptdev_create(struct rpmsg_device *rpdev, struct device *parent,
|
|
|
|
struct rpmsg_channel_info chinfo)
|
|
|
|
{
|
|
|
|
struct rpmsg_eptdev *eptdev;
|
|
|
|
int ret;
|
|
|
|
|
|
|
|
eptdev = rpmsg_chrdev_eptdev_alloc(rpdev, parent);
|
|
|
|
if (IS_ERR(eptdev))
|
|
|
|
return PTR_ERR(eptdev);
|
|
|
|
|
|
|
|
ret = rpmsg_chrdev_eptdev_add(eptdev, chinfo);
|
|
|
|
|
|
|
|
return ret;
|
|
|
|
}
|
2022-01-24 10:25:14 +00:00
|
|
|
EXPORT_SYMBOL(rpmsg_chrdev_eptdev_create);
|
rpmsg: Driver for user space endpoint interface
This driver allows rpmsg instances to expose access to rpmsg endpoints
to user space processes. It provides a control interface, allowing
userspace to export endpoints and an endpoint interface for each exposed
endpoint.
The implementation is based on prior art by Texas Instrument, Google,
PetaLogix and was derived from a FreeRTOS performance statistics driver
written by Michal Simek.
The control interface provides a "create endpoint" ioctl, which is fed a
name, source and destination address. The three values are used to
create the endpoint, in a backend-specific way, and a rpmsg endpoint
device is created - with the three parameters are available in sysfs for
udev usage.
E.g. to create an endpoint device for one of the Qualcomm SMD channel
related to DIAG one would issue:
struct rpmsg_endpoint_info info = { "DIAG_CNTL", 0, 0 };
int fd = open("/dev/rpmsg_ctrl0", O_RDWR);
ioctl(fd, RPMSG_CREATE_EPT_IOCTL, &info);
Each created endpoint device shows up as an individual character device
in /dev, allowing permission to be controlled on a per-endpoint basis.
The rpmsg endpoint will be created and destroyed following the opening
and closing of the endpoint device, allowing rpmsg backends to open and
close the physical channel, if supported by the wire protocol.
Cc: Marek Novak <marek.novak@nxp.com>
Cc: Matteo Sartori <matteo.sartori@t3lab.it>
Cc: Michal Simek <monstr@monstr.eu>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2017-01-11 14:35:12 +00:00
|
|
|
|
2022-01-24 10:25:23 +00:00
|
|
|
static int rpmsg_chrdev_probe(struct rpmsg_device *rpdev)
|
|
|
|
{
|
|
|
|
struct rpmsg_channel_info chinfo;
|
|
|
|
struct rpmsg_eptdev *eptdev;
|
|
|
|
struct device *dev = &rpdev->dev;
|
|
|
|
|
|
|
|
memcpy(chinfo.name, rpdev->id.name, RPMSG_NAME_SIZE);
|
|
|
|
chinfo.src = rpdev->src;
|
|
|
|
chinfo.dst = rpdev->dst;
|
|
|
|
|
|
|
|
eptdev = rpmsg_chrdev_eptdev_alloc(rpdev, dev);
|
|
|
|
if (IS_ERR(eptdev))
|
|
|
|
return PTR_ERR(eptdev);
|
|
|
|
|
|
|
|
/* Set the default_ept to the rpmsg device endpoint */
|
|
|
|
eptdev->default_ept = rpdev->ept;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* The rpmsg_ept_cb uses *priv parameter to get its rpmsg_eptdev context.
|
|
|
|
* Storedit in default_ept *priv field.
|
|
|
|
*/
|
|
|
|
eptdev->default_ept->priv = eptdev;
|
|
|
|
|
|
|
|
return rpmsg_chrdev_eptdev_add(eptdev, chinfo);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void rpmsg_chrdev_remove(struct rpmsg_device *rpdev)
|
|
|
|
{
|
|
|
|
int ret;
|
|
|
|
|
|
|
|
ret = device_for_each_child(&rpdev->dev, NULL, rpmsg_chrdev_eptdev_destroy);
|
|
|
|
if (ret)
|
|
|
|
dev_warn(&rpdev->dev, "failed to destroy endpoints: %d\n", ret);
|
|
|
|
}
|
|
|
|
|
|
|
|
static struct rpmsg_device_id rpmsg_chrdev_id_table[] = {
|
|
|
|
{ .name = "rpmsg-raw" },
|
|
|
|
{ },
|
|
|
|
};
|
|
|
|
|
|
|
|
static struct rpmsg_driver rpmsg_chrdev_driver = {
|
|
|
|
.probe = rpmsg_chrdev_probe,
|
|
|
|
.remove = rpmsg_chrdev_remove,
|
|
|
|
.callback = rpmsg_ept_cb,
|
|
|
|
.id_table = rpmsg_chrdev_id_table,
|
|
|
|
.drv.name = "rpmsg_chrdev",
|
|
|
|
};
|
|
|
|
|
2021-03-11 14:04:08 +00:00
|
|
|
static int rpmsg_chrdev_init(void)
|
rpmsg: Driver for user space endpoint interface
This driver allows rpmsg instances to expose access to rpmsg endpoints
to user space processes. It provides a control interface, allowing
userspace to export endpoints and an endpoint interface for each exposed
endpoint.
The implementation is based on prior art by Texas Instrument, Google,
PetaLogix and was derived from a FreeRTOS performance statistics driver
written by Michal Simek.
The control interface provides a "create endpoint" ioctl, which is fed a
name, source and destination address. The three values are used to
create the endpoint, in a backend-specific way, and a rpmsg endpoint
device is created - with the three parameters are available in sysfs for
udev usage.
E.g. to create an endpoint device for one of the Qualcomm SMD channel
related to DIAG one would issue:
struct rpmsg_endpoint_info info = { "DIAG_CNTL", 0, 0 };
int fd = open("/dev/rpmsg_ctrl0", O_RDWR);
ioctl(fd, RPMSG_CREATE_EPT_IOCTL, &info);
Each created endpoint device shows up as an individual character device
in /dev, allowing permission to be controlled on a per-endpoint basis.
The rpmsg endpoint will be created and destroyed following the opening
and closing of the endpoint device, allowing rpmsg backends to open and
close the physical channel, if supported by the wire protocol.
Cc: Marek Novak <marek.novak@nxp.com>
Cc: Matteo Sartori <matteo.sartori@t3lab.it>
Cc: Michal Simek <monstr@monstr.eu>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2017-01-11 14:35:12 +00:00
|
|
|
{
|
|
|
|
int ret;
|
|
|
|
|
2022-01-24 10:25:16 +00:00
|
|
|
ret = alloc_chrdev_region(&rpmsg_major, 0, RPMSG_DEV_MAX, "rpmsg_char");
|
rpmsg: Driver for user space endpoint interface
This driver allows rpmsg instances to expose access to rpmsg endpoints
to user space processes. It provides a control interface, allowing
userspace to export endpoints and an endpoint interface for each exposed
endpoint.
The implementation is based on prior art by Texas Instrument, Google,
PetaLogix and was derived from a FreeRTOS performance statistics driver
written by Michal Simek.
The control interface provides a "create endpoint" ioctl, which is fed a
name, source and destination address. The three values are used to
create the endpoint, in a backend-specific way, and a rpmsg endpoint
device is created - with the three parameters are available in sysfs for
udev usage.
E.g. to create an endpoint device for one of the Qualcomm SMD channel
related to DIAG one would issue:
struct rpmsg_endpoint_info info = { "DIAG_CNTL", 0, 0 };
int fd = open("/dev/rpmsg_ctrl0", O_RDWR);
ioctl(fd, RPMSG_CREATE_EPT_IOCTL, &info);
Each created endpoint device shows up as an individual character device
in /dev, allowing permission to be controlled on a per-endpoint basis.
The rpmsg endpoint will be created and destroyed following the opening
and closing of the endpoint device, allowing rpmsg backends to open and
close the physical channel, if supported by the wire protocol.
Cc: Marek Novak <marek.novak@nxp.com>
Cc: Matteo Sartori <matteo.sartori@t3lab.it>
Cc: Michal Simek <monstr@monstr.eu>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2017-01-11 14:35:12 +00:00
|
|
|
if (ret < 0) {
|
2021-11-08 13:59:45 +00:00
|
|
|
pr_err("failed to allocate char dev region\n");
|
rpmsg: Driver for user space endpoint interface
This driver allows rpmsg instances to expose access to rpmsg endpoints
to user space processes. It provides a control interface, allowing
userspace to export endpoints and an endpoint interface for each exposed
endpoint.
The implementation is based on prior art by Texas Instrument, Google,
PetaLogix and was derived from a FreeRTOS performance statistics driver
written by Michal Simek.
The control interface provides a "create endpoint" ioctl, which is fed a
name, source and destination address. The three values are used to
create the endpoint, in a backend-specific way, and a rpmsg endpoint
device is created - with the three parameters are available in sysfs for
udev usage.
E.g. to create an endpoint device for one of the Qualcomm SMD channel
related to DIAG one would issue:
struct rpmsg_endpoint_info info = { "DIAG_CNTL", 0, 0 };
int fd = open("/dev/rpmsg_ctrl0", O_RDWR);
ioctl(fd, RPMSG_CREATE_EPT_IOCTL, &info);
Each created endpoint device shows up as an individual character device
in /dev, allowing permission to be controlled on a per-endpoint basis.
The rpmsg endpoint will be created and destroyed following the opening
and closing of the endpoint device, allowing rpmsg backends to open and
close the physical channel, if supported by the wire protocol.
Cc: Marek Novak <marek.novak@nxp.com>
Cc: Matteo Sartori <matteo.sartori@t3lab.it>
Cc: Michal Simek <monstr@monstr.eu>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2017-01-11 14:35:12 +00:00
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
2022-01-24 10:25:23 +00:00
|
|
|
ret = register_rpmsg_driver(&rpmsg_chrdev_driver);
|
|
|
|
if (ret < 0) {
|
|
|
|
pr_err("rpmsg: failed to register rpmsg raw driver\n");
|
|
|
|
goto free_region;
|
|
|
|
}
|
|
|
|
|
2022-01-24 10:25:16 +00:00
|
|
|
return 0;
|
2022-01-24 10:25:23 +00:00
|
|
|
|
|
|
|
free_region:
|
|
|
|
unregister_chrdev_region(rpmsg_major, RPMSG_DEV_MAX);
|
|
|
|
|
|
|
|
return ret;
|
rpmsg: Driver for user space endpoint interface
This driver allows rpmsg instances to expose access to rpmsg endpoints
to user space processes. It provides a control interface, allowing
userspace to export endpoints and an endpoint interface for each exposed
endpoint.
The implementation is based on prior art by Texas Instrument, Google,
PetaLogix and was derived from a FreeRTOS performance statistics driver
written by Michal Simek.
The control interface provides a "create endpoint" ioctl, which is fed a
name, source and destination address. The three values are used to
create the endpoint, in a backend-specific way, and a rpmsg endpoint
device is created - with the three parameters are available in sysfs for
udev usage.
E.g. to create an endpoint device for one of the Qualcomm SMD channel
related to DIAG one would issue:
struct rpmsg_endpoint_info info = { "DIAG_CNTL", 0, 0 };
int fd = open("/dev/rpmsg_ctrl0", O_RDWR);
ioctl(fd, RPMSG_CREATE_EPT_IOCTL, &info);
Each created endpoint device shows up as an individual character device
in /dev, allowing permission to be controlled on a per-endpoint basis.
The rpmsg endpoint will be created and destroyed following the opening
and closing of the endpoint device, allowing rpmsg backends to open and
close the physical channel, if supported by the wire protocol.
Cc: Marek Novak <marek.novak@nxp.com>
Cc: Matteo Sartori <matteo.sartori@t3lab.it>
Cc: Michal Simek <monstr@monstr.eu>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2017-01-11 14:35:12 +00:00
|
|
|
}
|
2021-03-11 14:04:08 +00:00
|
|
|
postcore_initcall(rpmsg_chrdev_init);
|
rpmsg: Driver for user space endpoint interface
This driver allows rpmsg instances to expose access to rpmsg endpoints
to user space processes. It provides a control interface, allowing
userspace to export endpoints and an endpoint interface for each exposed
endpoint.
The implementation is based on prior art by Texas Instrument, Google,
PetaLogix and was derived from a FreeRTOS performance statistics driver
written by Michal Simek.
The control interface provides a "create endpoint" ioctl, which is fed a
name, source and destination address. The three values are used to
create the endpoint, in a backend-specific way, and a rpmsg endpoint
device is created - with the three parameters are available in sysfs for
udev usage.
E.g. to create an endpoint device for one of the Qualcomm SMD channel
related to DIAG one would issue:
struct rpmsg_endpoint_info info = { "DIAG_CNTL", 0, 0 };
int fd = open("/dev/rpmsg_ctrl0", O_RDWR);
ioctl(fd, RPMSG_CREATE_EPT_IOCTL, &info);
Each created endpoint device shows up as an individual character device
in /dev, allowing permission to be controlled on a per-endpoint basis.
The rpmsg endpoint will be created and destroyed following the opening
and closing of the endpoint device, allowing rpmsg backends to open and
close the physical channel, if supported by the wire protocol.
Cc: Marek Novak <marek.novak@nxp.com>
Cc: Matteo Sartori <matteo.sartori@t3lab.it>
Cc: Michal Simek <monstr@monstr.eu>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2017-01-11 14:35:12 +00:00
|
|
|
|
|
|
|
static void rpmsg_chrdev_exit(void)
|
|
|
|
{
|
2022-01-24 10:25:23 +00:00
|
|
|
unregister_rpmsg_driver(&rpmsg_chrdev_driver);
|
rpmsg: Driver for user space endpoint interface
This driver allows rpmsg instances to expose access to rpmsg endpoints
to user space processes. It provides a control interface, allowing
userspace to export endpoints and an endpoint interface for each exposed
endpoint.
The implementation is based on prior art by Texas Instrument, Google,
PetaLogix and was derived from a FreeRTOS performance statistics driver
written by Michal Simek.
The control interface provides a "create endpoint" ioctl, which is fed a
name, source and destination address. The three values are used to
create the endpoint, in a backend-specific way, and a rpmsg endpoint
device is created - with the three parameters are available in sysfs for
udev usage.
E.g. to create an endpoint device for one of the Qualcomm SMD channel
related to DIAG one would issue:
struct rpmsg_endpoint_info info = { "DIAG_CNTL", 0, 0 };
int fd = open("/dev/rpmsg_ctrl0", O_RDWR);
ioctl(fd, RPMSG_CREATE_EPT_IOCTL, &info);
Each created endpoint device shows up as an individual character device
in /dev, allowing permission to be controlled on a per-endpoint basis.
The rpmsg endpoint will be created and destroyed following the opening
and closing of the endpoint device, allowing rpmsg backends to open and
close the physical channel, if supported by the wire protocol.
Cc: Marek Novak <marek.novak@nxp.com>
Cc: Matteo Sartori <matteo.sartori@t3lab.it>
Cc: Michal Simek <monstr@monstr.eu>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2017-01-11 14:35:12 +00:00
|
|
|
unregister_chrdev_region(rpmsg_major, RPMSG_DEV_MAX);
|
|
|
|
}
|
|
|
|
module_exit(rpmsg_chrdev_exit);
|
2018-03-23 04:09:12 +00:00
|
|
|
|
|
|
|
MODULE_ALIAS("rpmsg:rpmsg_chrdev");
|
rpmsg: Driver for user space endpoint interface
This driver allows rpmsg instances to expose access to rpmsg endpoints
to user space processes. It provides a control interface, allowing
userspace to export endpoints and an endpoint interface for each exposed
endpoint.
The implementation is based on prior art by Texas Instrument, Google,
PetaLogix and was derived from a FreeRTOS performance statistics driver
written by Michal Simek.
The control interface provides a "create endpoint" ioctl, which is fed a
name, source and destination address. The three values are used to
create the endpoint, in a backend-specific way, and a rpmsg endpoint
device is created - with the three parameters are available in sysfs for
udev usage.
E.g. to create an endpoint device for one of the Qualcomm SMD channel
related to DIAG one would issue:
struct rpmsg_endpoint_info info = { "DIAG_CNTL", 0, 0 };
int fd = open("/dev/rpmsg_ctrl0", O_RDWR);
ioctl(fd, RPMSG_CREATE_EPT_IOCTL, &info);
Each created endpoint device shows up as an individual character device
in /dev, allowing permission to be controlled on a per-endpoint basis.
The rpmsg endpoint will be created and destroyed following the opening
and closing of the endpoint device, allowing rpmsg backends to open and
close the physical channel, if supported by the wire protocol.
Cc: Marek Novak <marek.novak@nxp.com>
Cc: Matteo Sartori <matteo.sartori@t3lab.it>
Cc: Michal Simek <monstr@monstr.eu>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2017-01-11 14:35:12 +00:00
|
|
|
MODULE_LICENSE("GPL v2");
|