Minki/linux
1
0
Fork 1
mirror of https://github.com/torvalds/linux.git synced 2024-12-25 12:21:37 +00:00
Code Issues Packages Projects Releases Wiki Activity
c0fee59016
linux/Documentation/devicetree/bindings/sound/adi,adau17x1.txt

33 lines
720 B
Plaintext
Raw Normal View History

ASoC: adau17x1: Add adau17x1 bindings document Signed-off-by: Andreas Irestål <andire@axis.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-02-16 12:56:43 +00:00
Analog Devices ADAU1361/ADAU1461/ADAU1761/ADAU1961/ADAU1381/ADAU1781
Required properties:
- compatible: Should contain one of the following:
"adi,adau1361"
"adi,adau1461"
"adi,adau1761"
"adi,adau1961"
"adi,adau1381"
"adi,adau1781"
- reg: The i2c address. Value depends on the state of ADDR0
and ADDR1, as wired in hardware.
ASoC: adau17x1: Add support for specifying the MCLK using the CCF The devices from the ADAU17X1 family all have a MCLK clock input which supplies the master clock for the device. The master clock is used as the input clock for the PLL. Currently the MCLK rate as well as the desired PLL output frequency need to be supplied by calling snd_soc_dai_set_pll() form a machine driver. Add support for specifying the MCLK using the common clock framework. In addition to that also automatically configure the PLL to a suitable rate if the master clock was provided using the CCW. This allows to use the CODEC driver without any special configuration requirements from the machine driver. While the PLL output frequency can be configured over a (more or less) continuous range the narrowness of the range and the other constraints of the clocking tree usually only result in two output frequencies that will actually be chosen. One for 44.1kHz based rates and one for 48kHz based rates, these are the rates that the automatic PLL configuration will use. For the rare case where a non-standard setup is required a machine driver can disable the auto-configuration and configure a custom frequency using the existing mechanisms. If the common clock framework is not enabled clk_get() will return NULL and the driver will function as before and the clock rate needs to be configured manually. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-06-15 13:07:27 +00:00
Optional properties:
- clock-names: If provided must be "mclk".
- clocks: phandle + clock-specifiers for the clock that provides
the audio master clock for the device.
ASoC: adau17x1: Add adau17x1 bindings document Signed-off-by: Andreas Irestål <andire@axis.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-02-16 12:56:43 +00:00
Examples:
#include <dt-bindings/sound/adau17x1.h>
i2c_bus {
adau1361@38 {
compatible = "adi,adau1761";
reg = <0x38>;
ASoC: adau17x1: Add support for specifying the MCLK using the CCF The devices from the ADAU17X1 family all have a MCLK clock input which supplies the master clock for the device. The master clock is used as the input clock for the PLL. Currently the MCLK rate as well as the desired PLL output frequency need to be supplied by calling snd_soc_dai_set_pll() form a machine driver. Add support for specifying the MCLK using the common clock framework. In addition to that also automatically configure the PLL to a suitable rate if the master clock was provided using the CCW. This allows to use the CODEC driver without any special configuration requirements from the machine driver. While the PLL output frequency can be configured over a (more or less) continuous range the narrowness of the range and the other constraints of the clocking tree usually only result in two output frequencies that will actually be chosen. One for 44.1kHz based rates and one for 48kHz based rates, these are the rates that the automatic PLL configuration will use. For the rare case where a non-standard setup is required a machine driver can disable the auto-configuration and configure a custom frequency using the existing mechanisms. If the common clock framework is not enabled clk_get() will return NULL and the driver will function as before and the clock rate needs to be configured manually. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-06-15 13:07:27 +00:00
clock-names = "mclk";
clocks = <&audio_clock>;
ASoC: adau17x1: Add adau17x1 bindings document Signed-off-by: Andreas Irestål <andire@axis.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-02-16 12:56:43 +00:00
};
};
Reference in New Issue Copy Permalink