linux/drivers/usb/core/config.c

1000 lines
28 KiB
C
Raw Normal View History

/*
* Released under the GPLv2 only.
* SPDX-License-Identifier: GPL-2.0
*/
#include <linux/usb.h>
#include <linux/usb/ch9.h>
#include <linux/usb/hcd.h>
#include <linux/usb/quirks.h>
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/device.h>
#include <asm/byteorder.h>
#include "usb.h"
#define USB_MAXALTSETTING 128 /* Hard limit */
#define USB_MAXCONFIG 8 /* Arbitrary limit */
static inline const char *plural(int n)
{
return (n == 1 ? "" : "s");
}
static int find_next_descriptor(unsigned char *buffer, int size,
int dt1, int dt2, int *num_skipped)
{
struct usb_descriptor_header *h;
int n = 0;
unsigned char *buffer0 = buffer;
/* Find the next descriptor of type dt1 or dt2 */
while (size > 0) {
h = (struct usb_descriptor_header *) buffer;
if (h->bDescriptorType == dt1 || h->bDescriptorType == dt2)
break;
buffer += h->bLength;
size -= h->bLength;
++n;
}
/* Store the number of descriptors skipped and return the
* number of bytes skipped */
if (num_skipped)
*num_skipped = n;
return buffer - buffer0;
}
static void usb_parse_ssp_isoc_endpoint_companion(struct device *ddev,
int cfgno, int inum, int asnum, struct usb_host_endpoint *ep,
unsigned char *buffer, int size)
{
struct usb_ssp_isoc_ep_comp_descriptor *desc;
/*
* The SuperSpeedPlus Isoc endpoint companion descriptor immediately
* follows the SuperSpeed Endpoint Companion descriptor
*/
desc = (struct usb_ssp_isoc_ep_comp_descriptor *) buffer;
if (desc->bDescriptorType != USB_DT_SSP_ISOC_ENDPOINT_COMP ||
size < USB_DT_SSP_ISOC_EP_COMP_SIZE) {
dev_warn(ddev, "Invalid SuperSpeedPlus isoc endpoint companion"
"for config %d interface %d altsetting %d ep %d.\n",
cfgno, inum, asnum, ep->desc.bEndpointAddress);
return;
}
memcpy(&ep->ssp_isoc_ep_comp, desc, USB_DT_SSP_ISOC_EP_COMP_SIZE);
}
static void usb_parse_ss_endpoint_companion(struct device *ddev, int cfgno,
USB: Parse and store the SuperSpeed endpoint companion descriptors. The USB 3.0 bus specification added an "Endpoint Companion" descriptor that is supposed to follow all SuperSpeed Endpoint descriptors. This descriptor is used to extend the bus protocol to allow more packets to be sent to an endpoint per "microframe". The word microframe was removed from the USB 3.0 specification because the host controller does not send Start Of Frame (SOF) symbols down the USB 3.0 wires. The descriptor defines a bMaxBurst field, which indicates the number of packets of wMaxPacketSize that a SuperSpeed device can send or recieve in a service interval. All non-control endpoints may set this value as high as 16 packets (bMaxBurst = 15). The descriptor also allows isochronous endpoints to further specify that they can send and receive multiple bursts per service interval. The bmAttributes allows them to specify a "Mult" of up to 3 (bmAttributes = 2). Bulk endpoints use bmAttributes to report the number of "Streams" they support. This was an extension of the endpoint pipe concept to allow multiple mass storage device commands to be outstanding for one bulk endpoint at a time. This should allow USB 3.0 mass storage devices to support SCSI command queueing. Bulk endpoints can say they support up to 2^16 (65,536) streams. The information in the endpoint companion descriptor must be stored with the other device, config, interface, and endpoint descriptors because the host controller needs to access them quickly, and we need to install some default values if a SuperSpeed device doesn't provide an endpoint companion descriptor. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-28 02:58:14 +00:00
int inum, int asnum, struct usb_host_endpoint *ep,
unsigned char *buffer, int size)
USB: Parse and store the SuperSpeed endpoint companion descriptors. The USB 3.0 bus specification added an "Endpoint Companion" descriptor that is supposed to follow all SuperSpeed Endpoint descriptors. This descriptor is used to extend the bus protocol to allow more packets to be sent to an endpoint per "microframe". The word microframe was removed from the USB 3.0 specification because the host controller does not send Start Of Frame (SOF) symbols down the USB 3.0 wires. The descriptor defines a bMaxBurst field, which indicates the number of packets of wMaxPacketSize that a SuperSpeed device can send or recieve in a service interval. All non-control endpoints may set this value as high as 16 packets (bMaxBurst = 15). The descriptor also allows isochronous endpoints to further specify that they can send and receive multiple bursts per service interval. The bmAttributes allows them to specify a "Mult" of up to 3 (bmAttributes = 2). Bulk endpoints use bmAttributes to report the number of "Streams" they support. This was an extension of the endpoint pipe concept to allow multiple mass storage device commands to be outstanding for one bulk endpoint at a time. This should allow USB 3.0 mass storage devices to support SCSI command queueing. Bulk endpoints can say they support up to 2^16 (65,536) streams. The information in the endpoint companion descriptor must be stored with the other device, config, interface, and endpoint descriptors because the host controller needs to access them quickly, and we need to install some default values if a SuperSpeed device doesn't provide an endpoint companion descriptor. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-28 02:58:14 +00:00
{
struct usb_ss_ep_comp_descriptor *desc;
USB: Parse and store the SuperSpeed endpoint companion descriptors. The USB 3.0 bus specification added an "Endpoint Companion" descriptor that is supposed to follow all SuperSpeed Endpoint descriptors. This descriptor is used to extend the bus protocol to allow more packets to be sent to an endpoint per "microframe". The word microframe was removed from the USB 3.0 specification because the host controller does not send Start Of Frame (SOF) symbols down the USB 3.0 wires. The descriptor defines a bMaxBurst field, which indicates the number of packets of wMaxPacketSize that a SuperSpeed device can send or recieve in a service interval. All non-control endpoints may set this value as high as 16 packets (bMaxBurst = 15). The descriptor also allows isochronous endpoints to further specify that they can send and receive multiple bursts per service interval. The bmAttributes allows them to specify a "Mult" of up to 3 (bmAttributes = 2). Bulk endpoints use bmAttributes to report the number of "Streams" they support. This was an extension of the endpoint pipe concept to allow multiple mass storage device commands to be outstanding for one bulk endpoint at a time. This should allow USB 3.0 mass storage devices to support SCSI command queueing. Bulk endpoints can say they support up to 2^16 (65,536) streams. The information in the endpoint companion descriptor must be stored with the other device, config, interface, and endpoint descriptors because the host controller needs to access them quickly, and we need to install some default values if a SuperSpeed device doesn't provide an endpoint companion descriptor. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-28 02:58:14 +00:00
int max_tx;
/* The SuperSpeed endpoint companion descriptor is supposed to
* be the first thing immediately following the endpoint descriptor.
*/
desc = (struct usb_ss_ep_comp_descriptor *) buffer;
if (desc->bDescriptorType != USB_DT_SS_ENDPOINT_COMP ||
size < USB_DT_SS_EP_COMP_SIZE) {
USB: Parse and store the SuperSpeed endpoint companion descriptors. The USB 3.0 bus specification added an "Endpoint Companion" descriptor that is supposed to follow all SuperSpeed Endpoint descriptors. This descriptor is used to extend the bus protocol to allow more packets to be sent to an endpoint per "microframe". The word microframe was removed from the USB 3.0 specification because the host controller does not send Start Of Frame (SOF) symbols down the USB 3.0 wires. The descriptor defines a bMaxBurst field, which indicates the number of packets of wMaxPacketSize that a SuperSpeed device can send or recieve in a service interval. All non-control endpoints may set this value as high as 16 packets (bMaxBurst = 15). The descriptor also allows isochronous endpoints to further specify that they can send and receive multiple bursts per service interval. The bmAttributes allows them to specify a "Mult" of up to 3 (bmAttributes = 2). Bulk endpoints use bmAttributes to report the number of "Streams" they support. This was an extension of the endpoint pipe concept to allow multiple mass storage device commands to be outstanding for one bulk endpoint at a time. This should allow USB 3.0 mass storage devices to support SCSI command queueing. Bulk endpoints can say they support up to 2^16 (65,536) streams. The information in the endpoint companion descriptor must be stored with the other device, config, interface, and endpoint descriptors because the host controller needs to access them quickly, and we need to install some default values if a SuperSpeed device doesn't provide an endpoint companion descriptor. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-28 02:58:14 +00:00
dev_warn(ddev, "No SuperSpeed endpoint companion for config %d "
" interface %d altsetting %d ep %d: "
"using minimum values\n",
cfgno, inum, asnum, ep->desc.bEndpointAddress);
/* Fill in some default values.
* Leave bmAttributes as zero, which will mean no streams for
* bulk, and isoc won't support multiple bursts of packets.
* With bursts of only one packet, and a Mult of 1, the max
* amount of data moved per endpoint service interval is one
* packet.
USB: Parse and store the SuperSpeed endpoint companion descriptors. The USB 3.0 bus specification added an "Endpoint Companion" descriptor that is supposed to follow all SuperSpeed Endpoint descriptors. This descriptor is used to extend the bus protocol to allow more packets to be sent to an endpoint per "microframe". The word microframe was removed from the USB 3.0 specification because the host controller does not send Start Of Frame (SOF) symbols down the USB 3.0 wires. The descriptor defines a bMaxBurst field, which indicates the number of packets of wMaxPacketSize that a SuperSpeed device can send or recieve in a service interval. All non-control endpoints may set this value as high as 16 packets (bMaxBurst = 15). The descriptor also allows isochronous endpoints to further specify that they can send and receive multiple bursts per service interval. The bmAttributes allows them to specify a "Mult" of up to 3 (bmAttributes = 2). Bulk endpoints use bmAttributes to report the number of "Streams" they support. This was an extension of the endpoint pipe concept to allow multiple mass storage device commands to be outstanding for one bulk endpoint at a time. This should allow USB 3.0 mass storage devices to support SCSI command queueing. Bulk endpoints can say they support up to 2^16 (65,536) streams. The information in the endpoint companion descriptor must be stored with the other device, config, interface, and endpoint descriptors because the host controller needs to access them quickly, and we need to install some default values if a SuperSpeed device doesn't provide an endpoint companion descriptor. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-28 02:58:14 +00:00
*/
ep->ss_ep_comp.bLength = USB_DT_SS_EP_COMP_SIZE;
ep->ss_ep_comp.bDescriptorType = USB_DT_SS_ENDPOINT_COMP;
if (usb_endpoint_xfer_isoc(&ep->desc) ||
usb_endpoint_xfer_int(&ep->desc))
ep->ss_ep_comp.wBytesPerInterval =
ep->desc.wMaxPacketSize;
return;
USB: Parse and store the SuperSpeed endpoint companion descriptors. The USB 3.0 bus specification added an "Endpoint Companion" descriptor that is supposed to follow all SuperSpeed Endpoint descriptors. This descriptor is used to extend the bus protocol to allow more packets to be sent to an endpoint per "microframe". The word microframe was removed from the USB 3.0 specification because the host controller does not send Start Of Frame (SOF) symbols down the USB 3.0 wires. The descriptor defines a bMaxBurst field, which indicates the number of packets of wMaxPacketSize that a SuperSpeed device can send or recieve in a service interval. All non-control endpoints may set this value as high as 16 packets (bMaxBurst = 15). The descriptor also allows isochronous endpoints to further specify that they can send and receive multiple bursts per service interval. The bmAttributes allows them to specify a "Mult" of up to 3 (bmAttributes = 2). Bulk endpoints use bmAttributes to report the number of "Streams" they support. This was an extension of the endpoint pipe concept to allow multiple mass storage device commands to be outstanding for one bulk endpoint at a time. This should allow USB 3.0 mass storage devices to support SCSI command queueing. Bulk endpoints can say they support up to 2^16 (65,536) streams. The information in the endpoint companion descriptor must be stored with the other device, config, interface, and endpoint descriptors because the host controller needs to access them quickly, and we need to install some default values if a SuperSpeed device doesn't provide an endpoint companion descriptor. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-28 02:58:14 +00:00
}
buffer += desc->bLength;
size -= desc->bLength;
memcpy(&ep->ss_ep_comp, desc, USB_DT_SS_EP_COMP_SIZE);
USB: Parse and store the SuperSpeed endpoint companion descriptors. The USB 3.0 bus specification added an "Endpoint Companion" descriptor that is supposed to follow all SuperSpeed Endpoint descriptors. This descriptor is used to extend the bus protocol to allow more packets to be sent to an endpoint per "microframe". The word microframe was removed from the USB 3.0 specification because the host controller does not send Start Of Frame (SOF) symbols down the USB 3.0 wires. The descriptor defines a bMaxBurst field, which indicates the number of packets of wMaxPacketSize that a SuperSpeed device can send or recieve in a service interval. All non-control endpoints may set this value as high as 16 packets (bMaxBurst = 15). The descriptor also allows isochronous endpoints to further specify that they can send and receive multiple bursts per service interval. The bmAttributes allows them to specify a "Mult" of up to 3 (bmAttributes = 2). Bulk endpoints use bmAttributes to report the number of "Streams" they support. This was an extension of the endpoint pipe concept to allow multiple mass storage device commands to be outstanding for one bulk endpoint at a time. This should allow USB 3.0 mass storage devices to support SCSI command queueing. Bulk endpoints can say they support up to 2^16 (65,536) streams. The information in the endpoint companion descriptor must be stored with the other device, config, interface, and endpoint descriptors because the host controller needs to access them quickly, and we need to install some default values if a SuperSpeed device doesn't provide an endpoint companion descriptor. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-28 02:58:14 +00:00
/* Check the various values */
if (usb_endpoint_xfer_control(&ep->desc) && desc->bMaxBurst != 0) {
dev_warn(ddev, "Control endpoint with bMaxBurst = %d in "
"config %d interface %d altsetting %d ep %d: "
"setting to zero\n", desc->bMaxBurst,
cfgno, inum, asnum, ep->desc.bEndpointAddress);
ep->ss_ep_comp.bMaxBurst = 0;
} else if (desc->bMaxBurst > 15) {
USB: Parse and store the SuperSpeed endpoint companion descriptors. The USB 3.0 bus specification added an "Endpoint Companion" descriptor that is supposed to follow all SuperSpeed Endpoint descriptors. This descriptor is used to extend the bus protocol to allow more packets to be sent to an endpoint per "microframe". The word microframe was removed from the USB 3.0 specification because the host controller does not send Start Of Frame (SOF) symbols down the USB 3.0 wires. The descriptor defines a bMaxBurst field, which indicates the number of packets of wMaxPacketSize that a SuperSpeed device can send or recieve in a service interval. All non-control endpoints may set this value as high as 16 packets (bMaxBurst = 15). The descriptor also allows isochronous endpoints to further specify that they can send and receive multiple bursts per service interval. The bmAttributes allows them to specify a "Mult" of up to 3 (bmAttributes = 2). Bulk endpoints use bmAttributes to report the number of "Streams" they support. This was an extension of the endpoint pipe concept to allow multiple mass storage device commands to be outstanding for one bulk endpoint at a time. This should allow USB 3.0 mass storage devices to support SCSI command queueing. Bulk endpoints can say they support up to 2^16 (65,536) streams. The information in the endpoint companion descriptor must be stored with the other device, config, interface, and endpoint descriptors because the host controller needs to access them quickly, and we need to install some default values if a SuperSpeed device doesn't provide an endpoint companion descriptor. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-28 02:58:14 +00:00
dev_warn(ddev, "Endpoint with bMaxBurst = %d in "
"config %d interface %d altsetting %d ep %d: "
"setting to 15\n", desc->bMaxBurst,
cfgno, inum, asnum, ep->desc.bEndpointAddress);
ep->ss_ep_comp.bMaxBurst = 15;
USB: Parse and store the SuperSpeed endpoint companion descriptors. The USB 3.0 bus specification added an "Endpoint Companion" descriptor that is supposed to follow all SuperSpeed Endpoint descriptors. This descriptor is used to extend the bus protocol to allow more packets to be sent to an endpoint per "microframe". The word microframe was removed from the USB 3.0 specification because the host controller does not send Start Of Frame (SOF) symbols down the USB 3.0 wires. The descriptor defines a bMaxBurst field, which indicates the number of packets of wMaxPacketSize that a SuperSpeed device can send or recieve in a service interval. All non-control endpoints may set this value as high as 16 packets (bMaxBurst = 15). The descriptor also allows isochronous endpoints to further specify that they can send and receive multiple bursts per service interval. The bmAttributes allows them to specify a "Mult" of up to 3 (bmAttributes = 2). Bulk endpoints use bmAttributes to report the number of "Streams" they support. This was an extension of the endpoint pipe concept to allow multiple mass storage device commands to be outstanding for one bulk endpoint at a time. This should allow USB 3.0 mass storage devices to support SCSI command queueing. Bulk endpoints can say they support up to 2^16 (65,536) streams. The information in the endpoint companion descriptor must be stored with the other device, config, interface, and endpoint descriptors because the host controller needs to access them quickly, and we need to install some default values if a SuperSpeed device doesn't provide an endpoint companion descriptor. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-28 02:58:14 +00:00
}
if ((usb_endpoint_xfer_control(&ep->desc) ||
usb_endpoint_xfer_int(&ep->desc)) &&
desc->bmAttributes != 0) {
USB: Parse and store the SuperSpeed endpoint companion descriptors. The USB 3.0 bus specification added an "Endpoint Companion" descriptor that is supposed to follow all SuperSpeed Endpoint descriptors. This descriptor is used to extend the bus protocol to allow more packets to be sent to an endpoint per "microframe". The word microframe was removed from the USB 3.0 specification because the host controller does not send Start Of Frame (SOF) symbols down the USB 3.0 wires. The descriptor defines a bMaxBurst field, which indicates the number of packets of wMaxPacketSize that a SuperSpeed device can send or recieve in a service interval. All non-control endpoints may set this value as high as 16 packets (bMaxBurst = 15). The descriptor also allows isochronous endpoints to further specify that they can send and receive multiple bursts per service interval. The bmAttributes allows them to specify a "Mult" of up to 3 (bmAttributes = 2). Bulk endpoints use bmAttributes to report the number of "Streams" they support. This was an extension of the endpoint pipe concept to allow multiple mass storage device commands to be outstanding for one bulk endpoint at a time. This should allow USB 3.0 mass storage devices to support SCSI command queueing. Bulk endpoints can say they support up to 2^16 (65,536) streams. The information in the endpoint companion descriptor must be stored with the other device, config, interface, and endpoint descriptors because the host controller needs to access them quickly, and we need to install some default values if a SuperSpeed device doesn't provide an endpoint companion descriptor. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-28 02:58:14 +00:00
dev_warn(ddev, "%s endpoint with bmAttributes = %d in "
"config %d interface %d altsetting %d ep %d: "
"setting to zero\n",
usb_endpoint_xfer_control(&ep->desc) ? "Control" : "Bulk",
desc->bmAttributes,
cfgno, inum, asnum, ep->desc.bEndpointAddress);
ep->ss_ep_comp.bmAttributes = 0;
} else if (usb_endpoint_xfer_bulk(&ep->desc) &&
desc->bmAttributes > 16) {
USB: Parse and store the SuperSpeed endpoint companion descriptors. The USB 3.0 bus specification added an "Endpoint Companion" descriptor that is supposed to follow all SuperSpeed Endpoint descriptors. This descriptor is used to extend the bus protocol to allow more packets to be sent to an endpoint per "microframe". The word microframe was removed from the USB 3.0 specification because the host controller does not send Start Of Frame (SOF) symbols down the USB 3.0 wires. The descriptor defines a bMaxBurst field, which indicates the number of packets of wMaxPacketSize that a SuperSpeed device can send or recieve in a service interval. All non-control endpoints may set this value as high as 16 packets (bMaxBurst = 15). The descriptor also allows isochronous endpoints to further specify that they can send and receive multiple bursts per service interval. The bmAttributes allows them to specify a "Mult" of up to 3 (bmAttributes = 2). Bulk endpoints use bmAttributes to report the number of "Streams" they support. This was an extension of the endpoint pipe concept to allow multiple mass storage device commands to be outstanding for one bulk endpoint at a time. This should allow USB 3.0 mass storage devices to support SCSI command queueing. Bulk endpoints can say they support up to 2^16 (65,536) streams. The information in the endpoint companion descriptor must be stored with the other device, config, interface, and endpoint descriptors because the host controller needs to access them quickly, and we need to install some default values if a SuperSpeed device doesn't provide an endpoint companion descriptor. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-28 02:58:14 +00:00
dev_warn(ddev, "Bulk endpoint with more than 65536 streams in "
"config %d interface %d altsetting %d ep %d: "
"setting to max\n",
cfgno, inum, asnum, ep->desc.bEndpointAddress);
ep->ss_ep_comp.bmAttributes = 16;
} else if (usb_endpoint_xfer_isoc(&ep->desc) &&
!USB_SS_SSP_ISOC_COMP(desc->bmAttributes) &&
USB_SS_MULT(desc->bmAttributes) > 3) {
USB: Parse and store the SuperSpeed endpoint companion descriptors. The USB 3.0 bus specification added an "Endpoint Companion" descriptor that is supposed to follow all SuperSpeed Endpoint descriptors. This descriptor is used to extend the bus protocol to allow more packets to be sent to an endpoint per "microframe". The word microframe was removed from the USB 3.0 specification because the host controller does not send Start Of Frame (SOF) symbols down the USB 3.0 wires. The descriptor defines a bMaxBurst field, which indicates the number of packets of wMaxPacketSize that a SuperSpeed device can send or recieve in a service interval. All non-control endpoints may set this value as high as 16 packets (bMaxBurst = 15). The descriptor also allows isochronous endpoints to further specify that they can send and receive multiple bursts per service interval. The bmAttributes allows them to specify a "Mult" of up to 3 (bmAttributes = 2). Bulk endpoints use bmAttributes to report the number of "Streams" they support. This was an extension of the endpoint pipe concept to allow multiple mass storage device commands to be outstanding for one bulk endpoint at a time. This should allow USB 3.0 mass storage devices to support SCSI command queueing. Bulk endpoints can say they support up to 2^16 (65,536) streams. The information in the endpoint companion descriptor must be stored with the other device, config, interface, and endpoint descriptors because the host controller needs to access them quickly, and we need to install some default values if a SuperSpeed device doesn't provide an endpoint companion descriptor. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-28 02:58:14 +00:00
dev_warn(ddev, "Isoc endpoint has Mult of %d in "
"config %d interface %d altsetting %d ep %d: "
"setting to 3\n",
USB_SS_MULT(desc->bmAttributes),
USB: Parse and store the SuperSpeed endpoint companion descriptors. The USB 3.0 bus specification added an "Endpoint Companion" descriptor that is supposed to follow all SuperSpeed Endpoint descriptors. This descriptor is used to extend the bus protocol to allow more packets to be sent to an endpoint per "microframe". The word microframe was removed from the USB 3.0 specification because the host controller does not send Start Of Frame (SOF) symbols down the USB 3.0 wires. The descriptor defines a bMaxBurst field, which indicates the number of packets of wMaxPacketSize that a SuperSpeed device can send or recieve in a service interval. All non-control endpoints may set this value as high as 16 packets (bMaxBurst = 15). The descriptor also allows isochronous endpoints to further specify that they can send and receive multiple bursts per service interval. The bmAttributes allows them to specify a "Mult" of up to 3 (bmAttributes = 2). Bulk endpoints use bmAttributes to report the number of "Streams" they support. This was an extension of the endpoint pipe concept to allow multiple mass storage device commands to be outstanding for one bulk endpoint at a time. This should allow USB 3.0 mass storage devices to support SCSI command queueing. Bulk endpoints can say they support up to 2^16 (65,536) streams. The information in the endpoint companion descriptor must be stored with the other device, config, interface, and endpoint descriptors because the host controller needs to access them quickly, and we need to install some default values if a SuperSpeed device doesn't provide an endpoint companion descriptor. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-28 02:58:14 +00:00
cfgno, inum, asnum, ep->desc.bEndpointAddress);
ep->ss_ep_comp.bmAttributes = 2;
USB: Parse and store the SuperSpeed endpoint companion descriptors. The USB 3.0 bus specification added an "Endpoint Companion" descriptor that is supposed to follow all SuperSpeed Endpoint descriptors. This descriptor is used to extend the bus protocol to allow more packets to be sent to an endpoint per "microframe". The word microframe was removed from the USB 3.0 specification because the host controller does not send Start Of Frame (SOF) symbols down the USB 3.0 wires. The descriptor defines a bMaxBurst field, which indicates the number of packets of wMaxPacketSize that a SuperSpeed device can send or recieve in a service interval. All non-control endpoints may set this value as high as 16 packets (bMaxBurst = 15). The descriptor also allows isochronous endpoints to further specify that they can send and receive multiple bursts per service interval. The bmAttributes allows them to specify a "Mult" of up to 3 (bmAttributes = 2). Bulk endpoints use bmAttributes to report the number of "Streams" they support. This was an extension of the endpoint pipe concept to allow multiple mass storage device commands to be outstanding for one bulk endpoint at a time. This should allow USB 3.0 mass storage devices to support SCSI command queueing. Bulk endpoints can say they support up to 2^16 (65,536) streams. The information in the endpoint companion descriptor must be stored with the other device, config, interface, and endpoint descriptors because the host controller needs to access them quickly, and we need to install some default values if a SuperSpeed device doesn't provide an endpoint companion descriptor. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-28 02:58:14 +00:00
}
if (usb_endpoint_xfer_isoc(&ep->desc))
max_tx = (desc->bMaxBurst + 1) *
(USB_SS_MULT(desc->bmAttributes)) *
USB: use usb_endpoint_maxp() instead of le16_to_cpu() Now ${LINUX}/drivers/usb/* can use usb_endpoint_maxp(desc) to get maximum packet size instead of le16_to_cpu(desc->wMaxPacketSize). This patch fix it up Cc: Armin Fuerst <fuerst@in.tum.de> Cc: Pavel Machek <pavel@ucw.cz> Cc: Johannes Erdfelt <johannes@erdfelt.com> Cc: Vojtech Pavlik <vojtech@suse.cz> Cc: Oliver Neukum <oliver@neukum.name> Cc: David Kubicek <dave@awk.cz> Cc: Johan Hovold <jhovold@gmail.com> Cc: Brad Hards <bhards@bigpond.net.au> Acked-by: Felipe Balbi <balbi@ti.com> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Thomas Dahlmann <dahlmann.thomas@arcor.de> Cc: David Brownell <david-b@pacbell.net> Cc: David Lopo <dlopo@chipidea.mips.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Michal Nazarewicz <m.nazarewicz@samsung.com> Cc: Xie Xiaobo <X.Xie@freescale.com> Cc: Li Yang <leoli@freescale.com> Cc: Jiang Bo <tanya.jiang@freescale.com> Cc: Yuan-hsin Chen <yhchen@faraday-tech.com> Cc: Darius Augulis <augulis.darius@gmail.com> Cc: Xiaochen Shen <xiaochen.shen@intel.com> Cc: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Cc: OKI SEMICONDUCTOR, <toshiharu-linux@dsn.okisemi.com> Cc: Robert Jarzmik <robert.jarzmik@free.fr> Cc: Ben Dooks <ben@simtec.co.uk> Cc: Thomas Abraham <thomas.ab@samsung.com> Cc: Herbert Pötzl <herbert@13thfloor.at> Cc: Arnaud Patard <arnaud.patard@rtp-net.org> Cc: Roman Weissgaerber <weissg@vienna.at> Acked-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Cc: Tony Olech <tony.olech@elandigitalsystems.com> Cc: Florian Floe Echtler <echtler@fs.tum.de> Cc: Christian Lucht <lucht@codemercs.com> Cc: Juergen Stuber <starblue@sourceforge.net> Cc: Georges Toth <g.toth@e-biz.lu> Cc: Bill Ryder <bryder@sgi.com> Cc: Kuba Ober <kuba@mareimbrium.org> Cc: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-08-23 10:12:03 +00:00
usb_endpoint_maxp(&ep->desc);
else if (usb_endpoint_xfer_int(&ep->desc))
USB: use usb_endpoint_maxp() instead of le16_to_cpu() Now ${LINUX}/drivers/usb/* can use usb_endpoint_maxp(desc) to get maximum packet size instead of le16_to_cpu(desc->wMaxPacketSize). This patch fix it up Cc: Armin Fuerst <fuerst@in.tum.de> Cc: Pavel Machek <pavel@ucw.cz> Cc: Johannes Erdfelt <johannes@erdfelt.com> Cc: Vojtech Pavlik <vojtech@suse.cz> Cc: Oliver Neukum <oliver@neukum.name> Cc: David Kubicek <dave@awk.cz> Cc: Johan Hovold <jhovold@gmail.com> Cc: Brad Hards <bhards@bigpond.net.au> Acked-by: Felipe Balbi <balbi@ti.com> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Thomas Dahlmann <dahlmann.thomas@arcor.de> Cc: David Brownell <david-b@pacbell.net> Cc: David Lopo <dlopo@chipidea.mips.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Michal Nazarewicz <m.nazarewicz@samsung.com> Cc: Xie Xiaobo <X.Xie@freescale.com> Cc: Li Yang <leoli@freescale.com> Cc: Jiang Bo <tanya.jiang@freescale.com> Cc: Yuan-hsin Chen <yhchen@faraday-tech.com> Cc: Darius Augulis <augulis.darius@gmail.com> Cc: Xiaochen Shen <xiaochen.shen@intel.com> Cc: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Cc: OKI SEMICONDUCTOR, <toshiharu-linux@dsn.okisemi.com> Cc: Robert Jarzmik <robert.jarzmik@free.fr> Cc: Ben Dooks <ben@simtec.co.uk> Cc: Thomas Abraham <thomas.ab@samsung.com> Cc: Herbert Pötzl <herbert@13thfloor.at> Cc: Arnaud Patard <arnaud.patard@rtp-net.org> Cc: Roman Weissgaerber <weissg@vienna.at> Acked-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Cc: Tony Olech <tony.olech@elandigitalsystems.com> Cc: Florian Floe Echtler <echtler@fs.tum.de> Cc: Christian Lucht <lucht@codemercs.com> Cc: Juergen Stuber <starblue@sourceforge.net> Cc: Georges Toth <g.toth@e-biz.lu> Cc: Bill Ryder <bryder@sgi.com> Cc: Kuba Ober <kuba@mareimbrium.org> Cc: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-08-23 10:12:03 +00:00
max_tx = usb_endpoint_maxp(&ep->desc) *
(desc->bMaxBurst + 1);
else
max_tx = 999999;
if (le16_to_cpu(desc->wBytesPerInterval) > max_tx) {
USB: Parse and store the SuperSpeed endpoint companion descriptors. The USB 3.0 bus specification added an "Endpoint Companion" descriptor that is supposed to follow all SuperSpeed Endpoint descriptors. This descriptor is used to extend the bus protocol to allow more packets to be sent to an endpoint per "microframe". The word microframe was removed from the USB 3.0 specification because the host controller does not send Start Of Frame (SOF) symbols down the USB 3.0 wires. The descriptor defines a bMaxBurst field, which indicates the number of packets of wMaxPacketSize that a SuperSpeed device can send or recieve in a service interval. All non-control endpoints may set this value as high as 16 packets (bMaxBurst = 15). The descriptor also allows isochronous endpoints to further specify that they can send and receive multiple bursts per service interval. The bmAttributes allows them to specify a "Mult" of up to 3 (bmAttributes = 2). Bulk endpoints use bmAttributes to report the number of "Streams" they support. This was an extension of the endpoint pipe concept to allow multiple mass storage device commands to be outstanding for one bulk endpoint at a time. This should allow USB 3.0 mass storage devices to support SCSI command queueing. Bulk endpoints can say they support up to 2^16 (65,536) streams. The information in the endpoint companion descriptor must be stored with the other device, config, interface, and endpoint descriptors because the host controller needs to access them quickly, and we need to install some default values if a SuperSpeed device doesn't provide an endpoint companion descriptor. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-28 02:58:14 +00:00
dev_warn(ddev, "%s endpoint with wBytesPerInterval of %d in "
"config %d interface %d altsetting %d ep %d: "
"setting to %d\n",
usb_endpoint_xfer_isoc(&ep->desc) ? "Isoc" : "Int",
le16_to_cpu(desc->wBytesPerInterval),
USB: Parse and store the SuperSpeed endpoint companion descriptors. The USB 3.0 bus specification added an "Endpoint Companion" descriptor that is supposed to follow all SuperSpeed Endpoint descriptors. This descriptor is used to extend the bus protocol to allow more packets to be sent to an endpoint per "microframe". The word microframe was removed from the USB 3.0 specification because the host controller does not send Start Of Frame (SOF) symbols down the USB 3.0 wires. The descriptor defines a bMaxBurst field, which indicates the number of packets of wMaxPacketSize that a SuperSpeed device can send or recieve in a service interval. All non-control endpoints may set this value as high as 16 packets (bMaxBurst = 15). The descriptor also allows isochronous endpoints to further specify that they can send and receive multiple bursts per service interval. The bmAttributes allows them to specify a "Mult" of up to 3 (bmAttributes = 2). Bulk endpoints use bmAttributes to report the number of "Streams" they support. This was an extension of the endpoint pipe concept to allow multiple mass storage device commands to be outstanding for one bulk endpoint at a time. This should allow USB 3.0 mass storage devices to support SCSI command queueing. Bulk endpoints can say they support up to 2^16 (65,536) streams. The information in the endpoint companion descriptor must be stored with the other device, config, interface, and endpoint descriptors because the host controller needs to access them quickly, and we need to install some default values if a SuperSpeed device doesn't provide an endpoint companion descriptor. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-28 02:58:14 +00:00
cfgno, inum, asnum, ep->desc.bEndpointAddress,
max_tx);
ep->ss_ep_comp.wBytesPerInterval = cpu_to_le16(max_tx);
USB: Parse and store the SuperSpeed endpoint companion descriptors. The USB 3.0 bus specification added an "Endpoint Companion" descriptor that is supposed to follow all SuperSpeed Endpoint descriptors. This descriptor is used to extend the bus protocol to allow more packets to be sent to an endpoint per "microframe". The word microframe was removed from the USB 3.0 specification because the host controller does not send Start Of Frame (SOF) symbols down the USB 3.0 wires. The descriptor defines a bMaxBurst field, which indicates the number of packets of wMaxPacketSize that a SuperSpeed device can send or recieve in a service interval. All non-control endpoints may set this value as high as 16 packets (bMaxBurst = 15). The descriptor also allows isochronous endpoints to further specify that they can send and receive multiple bursts per service interval. The bmAttributes allows them to specify a "Mult" of up to 3 (bmAttributes = 2). Bulk endpoints use bmAttributes to report the number of "Streams" they support. This was an extension of the endpoint pipe concept to allow multiple mass storage device commands to be outstanding for one bulk endpoint at a time. This should allow USB 3.0 mass storage devices to support SCSI command queueing. Bulk endpoints can say they support up to 2^16 (65,536) streams. The information in the endpoint companion descriptor must be stored with the other device, config, interface, and endpoint descriptors because the host controller needs to access them quickly, and we need to install some default values if a SuperSpeed device doesn't provide an endpoint companion descriptor. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-28 02:58:14 +00:00
}
/* Parse a possible SuperSpeedPlus isoc ep companion descriptor */
if (usb_endpoint_xfer_isoc(&ep->desc) &&
USB_SS_SSP_ISOC_COMP(desc->bmAttributes))
usb_parse_ssp_isoc_endpoint_companion(ddev, cfgno, inum, asnum,
ep, buffer, size);
USB: Parse and store the SuperSpeed endpoint companion descriptors. The USB 3.0 bus specification added an "Endpoint Companion" descriptor that is supposed to follow all SuperSpeed Endpoint descriptors. This descriptor is used to extend the bus protocol to allow more packets to be sent to an endpoint per "microframe". The word microframe was removed from the USB 3.0 specification because the host controller does not send Start Of Frame (SOF) symbols down the USB 3.0 wires. The descriptor defines a bMaxBurst field, which indicates the number of packets of wMaxPacketSize that a SuperSpeed device can send or recieve in a service interval. All non-control endpoints may set this value as high as 16 packets (bMaxBurst = 15). The descriptor also allows isochronous endpoints to further specify that they can send and receive multiple bursts per service interval. The bmAttributes allows them to specify a "Mult" of up to 3 (bmAttributes = 2). Bulk endpoints use bmAttributes to report the number of "Streams" they support. This was an extension of the endpoint pipe concept to allow multiple mass storage device commands to be outstanding for one bulk endpoint at a time. This should allow USB 3.0 mass storage devices to support SCSI command queueing. Bulk endpoints can say they support up to 2^16 (65,536) streams. The information in the endpoint companion descriptor must be stored with the other device, config, interface, and endpoint descriptors because the host controller needs to access them quickly, and we need to install some default values if a SuperSpeed device doesn't provide an endpoint companion descriptor. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-28 02:58:14 +00:00
}
static const unsigned short low_speed_maxpacket_maxes[4] = {
[USB_ENDPOINT_XFER_CONTROL] = 8,
[USB_ENDPOINT_XFER_ISOC] = 0,
[USB_ENDPOINT_XFER_BULK] = 0,
[USB_ENDPOINT_XFER_INT] = 8,
};
static const unsigned short full_speed_maxpacket_maxes[4] = {
[USB_ENDPOINT_XFER_CONTROL] = 64,
[USB_ENDPOINT_XFER_ISOC] = 1023,
[USB_ENDPOINT_XFER_BULK] = 64,
[USB_ENDPOINT_XFER_INT] = 64,
};
static const unsigned short high_speed_maxpacket_maxes[4] = {
[USB_ENDPOINT_XFER_CONTROL] = 64,
[USB_ENDPOINT_XFER_ISOC] = 1024,
[USB_ENDPOINT_XFER_BULK] = 512,
[USB_ENDPOINT_XFER_INT] = 1024,
};
static const unsigned short super_speed_maxpacket_maxes[4] = {
[USB_ENDPOINT_XFER_CONTROL] = 512,
[USB_ENDPOINT_XFER_ISOC] = 1024,
[USB_ENDPOINT_XFER_BULK] = 1024,
[USB_ENDPOINT_XFER_INT] = 1024,
};
static int usb_parse_endpoint(struct device *ddev, int cfgno, int inum,
int asnum, struct usb_host_interface *ifp, int num_ep,
unsigned char *buffer, int size)
{
unsigned char *buffer0 = buffer;
struct usb_endpoint_descriptor *d;
struct usb_host_endpoint *endpoint;
USB: Parse and store the SuperSpeed endpoint companion descriptors. The USB 3.0 bus specification added an "Endpoint Companion" descriptor that is supposed to follow all SuperSpeed Endpoint descriptors. This descriptor is used to extend the bus protocol to allow more packets to be sent to an endpoint per "microframe". The word microframe was removed from the USB 3.0 specification because the host controller does not send Start Of Frame (SOF) symbols down the USB 3.0 wires. The descriptor defines a bMaxBurst field, which indicates the number of packets of wMaxPacketSize that a SuperSpeed device can send or recieve in a service interval. All non-control endpoints may set this value as high as 16 packets (bMaxBurst = 15). The descriptor also allows isochronous endpoints to further specify that they can send and receive multiple bursts per service interval. The bmAttributes allows them to specify a "Mult" of up to 3 (bmAttributes = 2). Bulk endpoints use bmAttributes to report the number of "Streams" they support. This was an extension of the endpoint pipe concept to allow multiple mass storage device commands to be outstanding for one bulk endpoint at a time. This should allow USB 3.0 mass storage devices to support SCSI command queueing. Bulk endpoints can say they support up to 2^16 (65,536) streams. The information in the endpoint companion descriptor must be stored with the other device, config, interface, and endpoint descriptors because the host controller needs to access them quickly, and we need to install some default values if a SuperSpeed device doesn't provide an endpoint companion descriptor. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-28 02:58:14 +00:00
int n, i, j, retval;
unsigned int maxp;
const unsigned short *maxpacket_maxes;
d = (struct usb_endpoint_descriptor *) buffer;
buffer += d->bLength;
size -= d->bLength;
if (d->bLength >= USB_DT_ENDPOINT_AUDIO_SIZE)
n = USB_DT_ENDPOINT_AUDIO_SIZE;
else if (d->bLength >= USB_DT_ENDPOINT_SIZE)
n = USB_DT_ENDPOINT_SIZE;
else {
dev_warn(ddev, "config %d interface %d altsetting %d has an "
"invalid endpoint descriptor of length %d, skipping\n",
cfgno, inum, asnum, d->bLength);
goto skip_to_next_endpoint_or_interface_descriptor;
}
i = d->bEndpointAddress & ~USB_ENDPOINT_DIR_MASK;
if (i >= 16 || i == 0) {
dev_warn(ddev, "config %d interface %d altsetting %d has an "
"invalid endpoint with address 0x%X, skipping\n",
cfgno, inum, asnum, d->bEndpointAddress);
goto skip_to_next_endpoint_or_interface_descriptor;
}
/* Only store as many endpoints as we have room for */
if (ifp->desc.bNumEndpoints >= num_ep)
goto skip_to_next_endpoint_or_interface_descriptor;
USB: fix problems with duplicate endpoint addresses When checking a new device's descriptors, the USB core does not check for duplicate endpoint addresses. This can cause a problem when the sysfs files for those endpoints are created; trying to create multiple files with the same name will provoke a WARNING: WARNING: CPU: 2 PID: 865 at fs/sysfs/dir.c:31 sysfs_warn_dup+0x8a/0xa0 sysfs: cannot create duplicate filename '/devices/platform/dummy_hcd.0/usb2/2-1/2-1:64.0/ep_05' Kernel panic - not syncing: panic_on_warn set ... CPU: 2 PID: 865 Comm: kworker/2:1 Not tainted 4.9.0-rc7+ #34 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 Workqueue: usb_hub_wq hub_event ffff88006bee64c8 ffffffff81f96b8a ffffffff00000001 1ffff1000d7dcc2c ffffed000d7dcc24 0000000000000001 0000000041b58ab3 ffffffff8598b510 ffffffff81f968f8 ffffffff850fee20 ffffffff85cff020 dffffc0000000000 Call Trace: [< inline >] __dump_stack lib/dump_stack.c:15 [<ffffffff81f96b8a>] dump_stack+0x292/0x398 lib/dump_stack.c:51 [<ffffffff8168c88e>] panic+0x1cb/0x3a9 kernel/panic.c:179 [<ffffffff812b80b4>] __warn+0x1c4/0x1e0 kernel/panic.c:542 [<ffffffff812b8195>] warn_slowpath_fmt+0xc5/0x110 kernel/panic.c:565 [<ffffffff819e70ca>] sysfs_warn_dup+0x8a/0xa0 fs/sysfs/dir.c:30 [<ffffffff819e7308>] sysfs_create_dir_ns+0x178/0x1d0 fs/sysfs/dir.c:59 [< inline >] create_dir lib/kobject.c:71 [<ffffffff81fa1b07>] kobject_add_internal+0x227/0xa60 lib/kobject.c:229 [< inline >] kobject_add_varg lib/kobject.c:366 [<ffffffff81fa2479>] kobject_add+0x139/0x220 lib/kobject.c:411 [<ffffffff82737a63>] device_add+0x353/0x1660 drivers/base/core.c:1088 [<ffffffff82738d8d>] device_register+0x1d/0x20 drivers/base/core.c:1206 [<ffffffff82cb77d3>] usb_create_ep_devs+0x163/0x260 drivers/usb/core/endpoint.c:195 [<ffffffff82c9f27b>] create_intf_ep_devs+0x13b/0x200 drivers/usb/core/message.c:1030 [<ffffffff82ca39d3>] usb_set_configuration+0x1083/0x18d0 drivers/usb/core/message.c:1937 [<ffffffff82cc9e2e>] generic_probe+0x6e/0xe0 drivers/usb/core/generic.c:172 [<ffffffff82caa7fa>] usb_probe_device+0xaa/0xe0 drivers/usb/core/driver.c:263 This patch prevents the problem by checking for duplicate endpoint addresses during enumeration and skipping any duplicates. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Reported-by: Andrey Konovalov <andreyknvl@google.com> Tested-by: Andrey Konovalov <andreyknvl@google.com> CC: <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-12-19 17:03:41 +00:00
/* Check for duplicate endpoint addresses */
for (i = 0; i < ifp->desc.bNumEndpoints; ++i) {
if (ifp->endpoint[i].desc.bEndpointAddress ==
d->bEndpointAddress) {
dev_warn(ddev, "config %d interface %d altsetting %d has a duplicate endpoint with address 0x%X, skipping\n",
cfgno, inum, asnum, d->bEndpointAddress);
goto skip_to_next_endpoint_or_interface_descriptor;
}
}
endpoint = &ifp->endpoint[ifp->desc.bNumEndpoints];
++ifp->desc.bNumEndpoints;
memcpy(&endpoint->desc, d, n);
INIT_LIST_HEAD(&endpoint->urb_list);
/*
* Fix up bInterval values outside the legal range.
* Use 10 or 8 ms if no proper value can be guessed.
*/
i = 0; /* i = min, j = max, n = default */
j = 255;
if (usb_endpoint_xfer_int(d)) {
i = 1;
switch (to_usb_device(ddev)->speed) {
case USB_SPEED_SUPER_PLUS:
case USB_SPEED_SUPER:
case USB_SPEED_HIGH:
/*
* Many device manufacturers are using full-speed
* bInterval values in high-speed interrupt endpoint
* descriptors. Try to fix those and fall back to an
* 8-ms default value otherwise.
*/
n = fls(d->bInterval*8);
if (n == 0)
n = 7; /* 8 ms = 2^(7-1) uframes */
j = 16;
/*
* Adjust bInterval for quirked devices.
*/
/*
* This quirk fixes bIntervals reported in ms.
*/
if (to_usb_device(ddev)->quirks &
USB_QUIRK_LINEAR_FRAME_INTR_BINTERVAL) {
n = clamp(fls(d->bInterval) + 3, i, j);
i = j = n;
}
/*
* This quirk fixes bIntervals reported in
* linear microframes.
*/
if (to_usb_device(ddev)->quirks &
USB_QUIRK_LINEAR_UFRAME_INTR_BINTERVAL) {
n = clamp(fls(d->bInterval), i, j);
i = j = n;
}
break;
default: /* USB_SPEED_FULL or _LOW */
/*
* For low-speed, 10 ms is the official minimum.
* But some "overclocked" devices might want faster
* polling so we'll allow it.
*/
n = 10;
break;
}
} else if (usb_endpoint_xfer_isoc(d)) {
i = 1;
j = 16;
switch (to_usb_device(ddev)->speed) {
case USB_SPEED_HIGH:
n = 7; /* 8 ms = 2^(7-1) uframes */
break;
default: /* USB_SPEED_FULL */
n = 4; /* 8 ms = 2^(4-1) frames */
break;
}
}
if (d->bInterval < i || d->bInterval > j) {
dev_warn(ddev, "config %d interface %d altsetting %d "
"endpoint 0x%X has an invalid bInterval %d, "
"changing to %d\n",
cfgno, inum, asnum,
d->bEndpointAddress, d->bInterval, n);
endpoint->desc.bInterval = n;
}
/* Some buggy low-speed devices have Bulk endpoints, which is
* explicitly forbidden by the USB spec. In an attempt to make
* them usable, we will try treating them as Interrupt endpoints.
*/
if (to_usb_device(ddev)->speed == USB_SPEED_LOW &&
usb_endpoint_xfer_bulk(d)) {
dev_warn(ddev, "config %d interface %d altsetting %d "
"endpoint 0x%X is Bulk; changing to Interrupt\n",
cfgno, inum, asnum, d->bEndpointAddress);
endpoint->desc.bmAttributes = USB_ENDPOINT_XFER_INT;
endpoint->desc.bInterval = 1;
USB: use usb_endpoint_maxp() instead of le16_to_cpu() Now ${LINUX}/drivers/usb/* can use usb_endpoint_maxp(desc) to get maximum packet size instead of le16_to_cpu(desc->wMaxPacketSize). This patch fix it up Cc: Armin Fuerst <fuerst@in.tum.de> Cc: Pavel Machek <pavel@ucw.cz> Cc: Johannes Erdfelt <johannes@erdfelt.com> Cc: Vojtech Pavlik <vojtech@suse.cz> Cc: Oliver Neukum <oliver@neukum.name> Cc: David Kubicek <dave@awk.cz> Cc: Johan Hovold <jhovold@gmail.com> Cc: Brad Hards <bhards@bigpond.net.au> Acked-by: Felipe Balbi <balbi@ti.com> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Thomas Dahlmann <dahlmann.thomas@arcor.de> Cc: David Brownell <david-b@pacbell.net> Cc: David Lopo <dlopo@chipidea.mips.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Michal Nazarewicz <m.nazarewicz@samsung.com> Cc: Xie Xiaobo <X.Xie@freescale.com> Cc: Li Yang <leoli@freescale.com> Cc: Jiang Bo <tanya.jiang@freescale.com> Cc: Yuan-hsin Chen <yhchen@faraday-tech.com> Cc: Darius Augulis <augulis.darius@gmail.com> Cc: Xiaochen Shen <xiaochen.shen@intel.com> Cc: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Cc: OKI SEMICONDUCTOR, <toshiharu-linux@dsn.okisemi.com> Cc: Robert Jarzmik <robert.jarzmik@free.fr> Cc: Ben Dooks <ben@simtec.co.uk> Cc: Thomas Abraham <thomas.ab@samsung.com> Cc: Herbert Pötzl <herbert@13thfloor.at> Cc: Arnaud Patard <arnaud.patard@rtp-net.org> Cc: Roman Weissgaerber <weissg@vienna.at> Acked-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Cc: Tony Olech <tony.olech@elandigitalsystems.com> Cc: Florian Floe Echtler <echtler@fs.tum.de> Cc: Christian Lucht <lucht@codemercs.com> Cc: Juergen Stuber <starblue@sourceforge.net> Cc: Georges Toth <g.toth@e-biz.lu> Cc: Bill Ryder <bryder@sgi.com> Cc: Kuba Ober <kuba@mareimbrium.org> Cc: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-08-23 10:12:03 +00:00
if (usb_endpoint_maxp(&endpoint->desc) > 8)
endpoint->desc.wMaxPacketSize = cpu_to_le16(8);
}
/* Validate the wMaxPacketSize field */
maxp = usb_endpoint_maxp(&endpoint->desc);
/* Find the highest legal maxpacket size for this endpoint */
i = 0; /* additional transactions per microframe */
switch (to_usb_device(ddev)->speed) {
case USB_SPEED_LOW:
maxpacket_maxes = low_speed_maxpacket_maxes;
break;
case USB_SPEED_FULL:
maxpacket_maxes = full_speed_maxpacket_maxes;
break;
case USB_SPEED_HIGH:
/* Bits 12..11 are allowed only for HS periodic endpoints */
if (usb_endpoint_xfer_int(d) || usb_endpoint_xfer_isoc(d)) {
i = maxp & (BIT(12) | BIT(11));
maxp &= ~i;
}
/* fallthrough */
default:
maxpacket_maxes = high_speed_maxpacket_maxes;
break;
case USB_SPEED_SUPER:
case USB_SPEED_SUPER_PLUS:
maxpacket_maxes = super_speed_maxpacket_maxes;
break;
}
j = maxpacket_maxes[usb_endpoint_type(&endpoint->desc)];
if (maxp > j) {
dev_warn(ddev, "config %d interface %d altsetting %d endpoint 0x%X has invalid maxpacket %d, setting to %d\n",
cfgno, inum, asnum, d->bEndpointAddress, maxp, j);
maxp = j;
endpoint->desc.wMaxPacketSize = cpu_to_le16(i | maxp);
}
/*
* Some buggy high speed devices have bulk endpoints using
* maxpacket sizes other than 512. High speed HCDs may not
* be able to handle that particular bug, so let's warn...
*/
if (to_usb_device(ddev)->speed == USB_SPEED_HIGH
&& usb_endpoint_xfer_bulk(d)) {
if (maxp != 512)
dev_warn(ddev, "config %d interface %d altsetting %d "
"bulk endpoint 0x%X has invalid maxpacket %d\n",
cfgno, inum, asnum, d->bEndpointAddress,
maxp);
}
USB: Parse and store the SuperSpeed endpoint companion descriptors. The USB 3.0 bus specification added an "Endpoint Companion" descriptor that is supposed to follow all SuperSpeed Endpoint descriptors. This descriptor is used to extend the bus protocol to allow more packets to be sent to an endpoint per "microframe". The word microframe was removed from the USB 3.0 specification because the host controller does not send Start Of Frame (SOF) symbols down the USB 3.0 wires. The descriptor defines a bMaxBurst field, which indicates the number of packets of wMaxPacketSize that a SuperSpeed device can send or recieve in a service interval. All non-control endpoints may set this value as high as 16 packets (bMaxBurst = 15). The descriptor also allows isochronous endpoints to further specify that they can send and receive multiple bursts per service interval. The bmAttributes allows them to specify a "Mult" of up to 3 (bmAttributes = 2). Bulk endpoints use bmAttributes to report the number of "Streams" they support. This was an extension of the endpoint pipe concept to allow multiple mass storage device commands to be outstanding for one bulk endpoint at a time. This should allow USB 3.0 mass storage devices to support SCSI command queueing. Bulk endpoints can say they support up to 2^16 (65,536) streams. The information in the endpoint companion descriptor must be stored with the other device, config, interface, and endpoint descriptors because the host controller needs to access them quickly, and we need to install some default values if a SuperSpeed device doesn't provide an endpoint companion descriptor. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-28 02:58:14 +00:00
/* Parse a possible SuperSpeed endpoint companion descriptor */
if (to_usb_device(ddev)->speed >= USB_SPEED_SUPER)
usb_parse_ss_endpoint_companion(ddev, cfgno,
inum, asnum, endpoint, buffer, size);
/* Skip over any Class Specific or Vendor Specific descriptors;
* find the next endpoint or interface descriptor */
endpoint->extra = buffer;
i = find_next_descriptor(buffer, size, USB_DT_ENDPOINT,
USB_DT_INTERFACE, &n);
endpoint->extralen = i;
retval = buffer - buffer0 + i;
if (n > 0)
dev_dbg(ddev, "skipped %d descriptor%s after %s\n",
n, plural(n), "endpoint");
USB: Parse and store the SuperSpeed endpoint companion descriptors. The USB 3.0 bus specification added an "Endpoint Companion" descriptor that is supposed to follow all SuperSpeed Endpoint descriptors. This descriptor is used to extend the bus protocol to allow more packets to be sent to an endpoint per "microframe". The word microframe was removed from the USB 3.0 specification because the host controller does not send Start Of Frame (SOF) symbols down the USB 3.0 wires. The descriptor defines a bMaxBurst field, which indicates the number of packets of wMaxPacketSize that a SuperSpeed device can send or recieve in a service interval. All non-control endpoints may set this value as high as 16 packets (bMaxBurst = 15). The descriptor also allows isochronous endpoints to further specify that they can send and receive multiple bursts per service interval. The bmAttributes allows them to specify a "Mult" of up to 3 (bmAttributes = 2). Bulk endpoints use bmAttributes to report the number of "Streams" they support. This was an extension of the endpoint pipe concept to allow multiple mass storage device commands to be outstanding for one bulk endpoint at a time. This should allow USB 3.0 mass storage devices to support SCSI command queueing. Bulk endpoints can say they support up to 2^16 (65,536) streams. The information in the endpoint companion descriptor must be stored with the other device, config, interface, and endpoint descriptors because the host controller needs to access them quickly, and we need to install some default values if a SuperSpeed device doesn't provide an endpoint companion descriptor. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-28 02:58:14 +00:00
return retval;
skip_to_next_endpoint_or_interface_descriptor:
i = find_next_descriptor(buffer, size, USB_DT_ENDPOINT,
USB_DT_INTERFACE, NULL);
return buffer - buffer0 + i;
}
void usb_release_interface_cache(struct kref *ref)
{
struct usb_interface_cache *intfc = ref_to_usb_interface_cache(ref);
int j;
for (j = 0; j < intfc->num_altsetting; j++) {
struct usb_host_interface *alt = &intfc->altsetting[j];
kfree(alt->endpoint);
kfree(alt->string);
}
kfree(intfc);
}
static int usb_parse_interface(struct device *ddev, int cfgno,
struct usb_host_config *config, unsigned char *buffer, int size,
u8 inums[], u8 nalts[])
{
unsigned char *buffer0 = buffer;
struct usb_interface_descriptor *d;
int inum, asnum;
struct usb_interface_cache *intfc;
struct usb_host_interface *alt;
int i, n;
int len, retval;
int num_ep, num_ep_orig;
d = (struct usb_interface_descriptor *) buffer;
buffer += d->bLength;
size -= d->bLength;
if (d->bLength < USB_DT_INTERFACE_SIZE)
goto skip_to_next_interface_descriptor;
/* Which interface entry is this? */
intfc = NULL;
inum = d->bInterfaceNumber;
for (i = 0; i < config->desc.bNumInterfaces; ++i) {
if (inums[i] == inum) {
intfc = config->intf_cache[i];
break;
}
}
if (!intfc || intfc->num_altsetting >= nalts[i])
goto skip_to_next_interface_descriptor;
/* Check for duplicate altsetting entries */
asnum = d->bAlternateSetting;
for ((i = 0, alt = &intfc->altsetting[0]);
i < intfc->num_altsetting;
(++i, ++alt)) {
if (alt->desc.bAlternateSetting == asnum) {
dev_warn(ddev, "Duplicate descriptor for config %d "
"interface %d altsetting %d, skipping\n",
cfgno, inum, asnum);
goto skip_to_next_interface_descriptor;
}
}
++intfc->num_altsetting;
memcpy(&alt->desc, d, USB_DT_INTERFACE_SIZE);
/* Skip over any Class Specific or Vendor Specific descriptors;
* find the first endpoint or interface descriptor */
alt->extra = buffer;
i = find_next_descriptor(buffer, size, USB_DT_ENDPOINT,
USB_DT_INTERFACE, &n);
alt->extralen = i;
if (n > 0)
dev_dbg(ddev, "skipped %d descriptor%s after %s\n",
n, plural(n), "interface");
buffer += i;
size -= i;
/* Allocate space for the right(?) number of endpoints */
num_ep = num_ep_orig = alt->desc.bNumEndpoints;
alt->desc.bNumEndpoints = 0; /* Use as a counter */
if (num_ep > USB_MAXENDPOINTS) {
dev_warn(ddev, "too many endpoints for config %d interface %d "
"altsetting %d: %d, using maximum allowed: %d\n",
cfgno, inum, asnum, num_ep, USB_MAXENDPOINTS);
num_ep = USB_MAXENDPOINTS;
}
if (num_ep > 0) {
/* Can't allocate 0 bytes */
len = sizeof(struct usb_host_endpoint) * num_ep;
alt->endpoint = kzalloc(len, GFP_KERNEL);
if (!alt->endpoint)
return -ENOMEM;
}
/* Parse all the endpoint descriptors */
n = 0;
while (size > 0) {
if (((struct usb_descriptor_header *) buffer)->bDescriptorType
== USB_DT_INTERFACE)
break;
retval = usb_parse_endpoint(ddev, cfgno, inum, asnum, alt,
num_ep, buffer, size);
if (retval < 0)
return retval;
++n;
buffer += retval;
size -= retval;
}
if (n != num_ep_orig)
dev_warn(ddev, "config %d interface %d altsetting %d has %d "
"endpoint descriptor%s, different from the interface "
"descriptor's value: %d\n",
cfgno, inum, asnum, n, plural(n), num_ep_orig);
return buffer - buffer0;
skip_to_next_interface_descriptor:
i = find_next_descriptor(buffer, size, USB_DT_INTERFACE,
USB_DT_INTERFACE, NULL);
return buffer - buffer0 + i;
}
static int usb_parse_configuration(struct usb_device *dev, int cfgidx,
struct usb_host_config *config, unsigned char *buffer, int size)
{
struct device *ddev = &dev->dev;
unsigned char *buffer0 = buffer;
int cfgno;
int nintf, nintf_orig;
int i, j, n;
struct usb_interface_cache *intfc;
unsigned char *buffer2;
int size2;
struct usb_descriptor_header *header;
int len, retval;
u8 inums[USB_MAXINTERFACES], nalts[USB_MAXINTERFACES];
unsigned iad_num = 0;
memcpy(&config->desc, buffer, USB_DT_CONFIG_SIZE);
if (config->desc.bDescriptorType != USB_DT_CONFIG ||
config->desc.bLength < USB_DT_CONFIG_SIZE ||
config->desc.bLength > size) {
dev_err(ddev, "invalid descriptor for config index %d: "
"type = 0x%X, length = %d\n", cfgidx,
config->desc.bDescriptorType, config->desc.bLength);
return -EINVAL;
}
cfgno = config->desc.bConfigurationValue;
buffer += config->desc.bLength;
size -= config->desc.bLength;
nintf = nintf_orig = config->desc.bNumInterfaces;
if (nintf > USB_MAXINTERFACES) {
dev_warn(ddev, "config %d has too many interfaces: %d, "
"using maximum allowed: %d\n",
cfgno, nintf, USB_MAXINTERFACES);
nintf = USB_MAXINTERFACES;
}
/* Go through the descriptors, checking their length and counting the
* number of altsettings for each interface */
n = 0;
for ((buffer2 = buffer, size2 = size);
size2 > 0;
(buffer2 += header->bLength, size2 -= header->bLength)) {
if (size2 < sizeof(struct usb_descriptor_header)) {
dev_warn(ddev, "config %d descriptor has %d excess "
"byte%s, ignoring\n",
cfgno, size2, plural(size2));
break;
}
header = (struct usb_descriptor_header *) buffer2;
if ((header->bLength > size2) || (header->bLength < 2)) {
dev_warn(ddev, "config %d has an invalid descriptor "
"of length %d, skipping remainder of the config\n",
cfgno, header->bLength);
break;
}
if (header->bDescriptorType == USB_DT_INTERFACE) {
struct usb_interface_descriptor *d;
int inum;
d = (struct usb_interface_descriptor *) header;
if (d->bLength < USB_DT_INTERFACE_SIZE) {
dev_warn(ddev, "config %d has an invalid "
"interface descriptor of length %d, "
"skipping\n", cfgno, d->bLength);
continue;
}
inum = d->bInterfaceNumber;
if ((dev->quirks & USB_QUIRK_HONOR_BNUMINTERFACES) &&
n >= nintf_orig) {
dev_warn(ddev, "config %d has more interface "
"descriptors, than it declares in "
"bNumInterfaces, ignoring interface "
"number: %d\n", cfgno, inum);
continue;
}
if (inum >= nintf_orig)
dev_warn(ddev, "config %d has an invalid "
"interface number: %d but max is %d\n",
cfgno, inum, nintf_orig - 1);
/* Have we already encountered this interface?
* Count its altsettings */
for (i = 0; i < n; ++i) {
if (inums[i] == inum)
break;
}
if (i < n) {
if (nalts[i] < 255)
++nalts[i];
} else if (n < USB_MAXINTERFACES) {
inums[n] = inum;
nalts[n] = 1;
++n;
}
} else if (header->bDescriptorType ==
USB_DT_INTERFACE_ASSOCIATION) {
if (iad_num == USB_MAXIADS) {
dev_warn(ddev, "found more Interface "
"Association Descriptors "
"than allocated for in "
"configuration %d\n", cfgno);
} else {
config->intf_assoc[iad_num] =
(struct usb_interface_assoc_descriptor
*)header;
iad_num++;
}
} else if (header->bDescriptorType == USB_DT_DEVICE ||
header->bDescriptorType == USB_DT_CONFIG)
dev_warn(ddev, "config %d contains an unexpected "
"descriptor of type 0x%X, skipping\n",
cfgno, header->bDescriptorType);
} /* for ((buffer2 = buffer, size2 = size); ...) */
size = buffer2 - buffer;
config->desc.wTotalLength = cpu_to_le16(buffer2 - buffer0);
if (n != nintf)
dev_warn(ddev, "config %d has %d interface%s, different from "
"the descriptor's value: %d\n",
cfgno, n, plural(n), nintf_orig);
else if (n == 0)
dev_warn(ddev, "config %d has no interfaces?\n", cfgno);
config->desc.bNumInterfaces = nintf = n;
/* Check for missing interface numbers */
for (i = 0; i < nintf; ++i) {
for (j = 0; j < nintf; ++j) {
if (inums[j] == i)
break;
}
if (j >= nintf)
dev_warn(ddev, "config %d has no interface number "
"%d\n", cfgno, i);
}
/* Allocate the usb_interface_caches and altsetting arrays */
for (i = 0; i < nintf; ++i) {
j = nalts[i];
if (j > USB_MAXALTSETTING) {
dev_warn(ddev, "too many alternate settings for "
"config %d interface %d: %d, "
"using maximum allowed: %d\n",
cfgno, inums[i], j, USB_MAXALTSETTING);
nalts[i] = j = USB_MAXALTSETTING;
}
len = sizeof(*intfc) + sizeof(struct usb_host_interface) * j;
config->intf_cache[i] = intfc = kzalloc(len, GFP_KERNEL);
if (!intfc)
return -ENOMEM;
kref_init(&intfc->ref);
}
USB: Parse and store the SuperSpeed endpoint companion descriptors. The USB 3.0 bus specification added an "Endpoint Companion" descriptor that is supposed to follow all SuperSpeed Endpoint descriptors. This descriptor is used to extend the bus protocol to allow more packets to be sent to an endpoint per "microframe". The word microframe was removed from the USB 3.0 specification because the host controller does not send Start Of Frame (SOF) symbols down the USB 3.0 wires. The descriptor defines a bMaxBurst field, which indicates the number of packets of wMaxPacketSize that a SuperSpeed device can send or recieve in a service interval. All non-control endpoints may set this value as high as 16 packets (bMaxBurst = 15). The descriptor also allows isochronous endpoints to further specify that they can send and receive multiple bursts per service interval. The bmAttributes allows them to specify a "Mult" of up to 3 (bmAttributes = 2). Bulk endpoints use bmAttributes to report the number of "Streams" they support. This was an extension of the endpoint pipe concept to allow multiple mass storage device commands to be outstanding for one bulk endpoint at a time. This should allow USB 3.0 mass storage devices to support SCSI command queueing. Bulk endpoints can say they support up to 2^16 (65,536) streams. The information in the endpoint companion descriptor must be stored with the other device, config, interface, and endpoint descriptors because the host controller needs to access them quickly, and we need to install some default values if a SuperSpeed device doesn't provide an endpoint companion descriptor. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-28 02:58:14 +00:00
/* FIXME: parse the BOS descriptor */
/* Skip over any Class Specific or Vendor Specific descriptors;
* find the first interface descriptor */
config->extra = buffer;
i = find_next_descriptor(buffer, size, USB_DT_INTERFACE,
USB_DT_INTERFACE, &n);
config->extralen = i;
if (n > 0)
dev_dbg(ddev, "skipped %d descriptor%s after %s\n",
n, plural(n), "configuration");
buffer += i;
size -= i;
/* Parse all the interface/altsetting descriptors */
while (size > 0) {
retval = usb_parse_interface(ddev, cfgno, config,
buffer, size, inums, nalts);
if (retval < 0)
return retval;
buffer += retval;
size -= retval;
}
/* Check for missing altsettings */
for (i = 0; i < nintf; ++i) {
intfc = config->intf_cache[i];
for (j = 0; j < intfc->num_altsetting; ++j) {
for (n = 0; n < intfc->num_altsetting; ++n) {
if (intfc->altsetting[n].desc.
bAlternateSetting == j)
break;
}
if (n >= intfc->num_altsetting)
dev_warn(ddev, "config %d interface %d has no "
"altsetting %d\n", cfgno, inums[i], j);
}
}
return 0;
}
/* hub-only!! ... and only exported for reset/reinit path.
* otherwise used internally on disconnect/destroy path
*/
void usb_destroy_configuration(struct usb_device *dev)
{
int c, i;
if (!dev->config)
return;
if (dev->rawdescriptors) {
for (i = 0; i < dev->descriptor.bNumConfigurations; i++)
kfree(dev->rawdescriptors[i]);
kfree(dev->rawdescriptors);
dev->rawdescriptors = NULL;
}
for (c = 0; c < dev->descriptor.bNumConfigurations; c++) {
struct usb_host_config *cf = &dev->config[c];
kfree(cf->string);
for (i = 0; i < cf->desc.bNumInterfaces; i++) {
if (cf->intf_cache[i])
kref_put(&cf->intf_cache[i]->ref,
usb_release_interface_cache);
}
}
kfree(dev->config);
dev->config = NULL;
}
/*
* Get the USB config descriptors, cache and parse'em
*
* hub-only!! ... and only in reset path, or usb_new_device()
* (used by real hubs and virtual root hubs)
*/
int usb_get_configuration(struct usb_device *dev)
{
struct device *ddev = &dev->dev;
int ncfg = dev->descriptor.bNumConfigurations;
int result = 0;
unsigned int cfgno, length;
unsigned char *bigbuffer;
struct usb_config_descriptor *desc;
cfgno = 0;
result = -ENOMEM;
if (ncfg > USB_MAXCONFIG) {
dev_warn(ddev, "too many configurations: %d, "
"using maximum allowed: %d\n", ncfg, USB_MAXCONFIG);
dev->descriptor.bNumConfigurations = ncfg = USB_MAXCONFIG;
}
if (ncfg < 1) {
dev_err(ddev, "no configurations\n");
return -EINVAL;
}
length = ncfg * sizeof(struct usb_host_config);
dev->config = kzalloc(length, GFP_KERNEL);
if (!dev->config)
goto err2;
length = ncfg * sizeof(char *);
dev->rawdescriptors = kzalloc(length, GFP_KERNEL);
if (!dev->rawdescriptors)
goto err2;
desc = kmalloc(USB_DT_CONFIG_SIZE, GFP_KERNEL);
if (!desc)
goto err2;
result = 0;
for (; cfgno < ncfg; cfgno++) {
/* We grab just the first descriptor so we know how long
* the whole configuration is */
result = usb_get_descriptor(dev, USB_DT_CONFIG, cfgno,
desc, USB_DT_CONFIG_SIZE);
if (result < 0) {
dev_err(ddev, "unable to read config index %d "
"descriptor/%s: %d\n", cfgno, "start", result);
if (result != -EPIPE)
goto err;
dev_err(ddev, "chopping to %d config(s)\n", cfgno);
dev->descriptor.bNumConfigurations = cfgno;
break;
} else if (result < 4) {
dev_err(ddev, "config index %d descriptor too short "
"(expected %i, got %i)\n", cfgno,
USB_DT_CONFIG_SIZE, result);
result = -EINVAL;
goto err;
}
length = max((int) le16_to_cpu(desc->wTotalLength),
USB_DT_CONFIG_SIZE);
/* Now that we know the length, get the whole thing */
bigbuffer = kmalloc(length, GFP_KERNEL);
if (!bigbuffer) {
result = -ENOMEM;
goto err;
}
if (dev->quirks & USB_QUIRK_DELAY_INIT)
msleep(100);
result = usb_get_descriptor(dev, USB_DT_CONFIG, cfgno,
bigbuffer, length);
if (result < 0) {
dev_err(ddev, "unable to read config index %d "
"descriptor/%s\n", cfgno, "all");
kfree(bigbuffer);
goto err;
}
if (result < length) {
dev_warn(ddev, "config index %d descriptor too short "
"(expected %i, got %i)\n", cfgno, length, result);
length = result;
}
dev->rawdescriptors[cfgno] = bigbuffer;
result = usb_parse_configuration(dev, cfgno,
&dev->config[cfgno], bigbuffer, length);
if (result < 0) {
++cfgno;
goto err;
}
}
result = 0;
err:
kfree(desc);
dev->descriptor.bNumConfigurations = cfgno;
err2:
if (result == -ENOMEM)
dev_err(ddev, "out of memory\n");
return result;
}
void usb_release_bos_descriptor(struct usb_device *dev)
{
if (dev->bos) {
kfree(dev->bos->desc);
kfree(dev->bos);
dev->bos = NULL;
}
}
/* Get BOS descriptor set */
int usb_get_bos_descriptor(struct usb_device *dev)
{
struct device *ddev = &dev->dev;
struct usb_bos_descriptor *bos;
struct usb_dev_cap_header *cap;
unsigned char *buffer;
int length, total_len, num, i;
int ret;
bos = kzalloc(sizeof(struct usb_bos_descriptor), GFP_KERNEL);
if (!bos)
return -ENOMEM;
/* Get BOS descriptor */
ret = usb_get_descriptor(dev, USB_DT_BOS, 0, bos, USB_DT_BOS_SIZE);
if (ret < USB_DT_BOS_SIZE) {
dev_err(ddev, "unable to get BOS descriptor\n");
if (ret >= 0)
ret = -ENOMSG;
kfree(bos);
return ret;
}
length = bos->bLength;
total_len = le16_to_cpu(bos->wTotalLength);
num = bos->bNumDeviceCaps;
kfree(bos);
if (total_len < length)
return -EINVAL;
dev->bos = kzalloc(sizeof(struct usb_host_bos), GFP_KERNEL);
if (!dev->bos)
return -ENOMEM;
/* Now let's get the whole BOS descriptor set */
buffer = kzalloc(total_len, GFP_KERNEL);
if (!buffer) {
ret = -ENOMEM;
goto err;
}
dev->bos->desc = (struct usb_bos_descriptor *)buffer;
ret = usb_get_descriptor(dev, USB_DT_BOS, 0, buffer, total_len);
if (ret < total_len) {
dev_err(ddev, "unable to get BOS descriptor set\n");
if (ret >= 0)
ret = -ENOMSG;
goto err;
}
total_len -= length;
for (i = 0; i < num; i++) {
buffer += length;
cap = (struct usb_dev_cap_header *)buffer;
length = cap->bLength;
if (total_len < length)
break;
total_len -= length;
if (cap->bDescriptorType != USB_DT_DEVICE_CAPABILITY) {
dev_warn(ddev, "descriptor type invalid, skip\n");
continue;
}
switch (cap->bDevCapabilityType) {
case USB_CAP_TYPE_WIRELESS_USB:
/* Wireless USB cap descriptor is handled by wusb */
break;
case USB_CAP_TYPE_EXT:
dev->bos->ext_cap =
(struct usb_ext_cap_descriptor *)buffer;
break;
case USB_SS_CAP_TYPE:
dev->bos->ss_cap =
(struct usb_ss_cap_descriptor *)buffer;
break;
case USB_SSP_CAP_TYPE:
dev->bos->ssp_cap =
(struct usb_ssp_cap_descriptor *)buffer;
break;
case CONTAINER_ID_TYPE:
dev->bos->ss_id =
(struct usb_ss_container_id_descriptor *)buffer;
break;
case USB_PTM_CAP_TYPE:
dev->bos->ptm_cap =
(struct usb_ptm_cap_descriptor *)buffer;
default:
break;
}
}
return 0;
err:
usb_release_bos_descriptor(dev);
return ret;
}