linux/drivers/tty/hvc/hvc_console.h

122 lines
3.7 KiB
C
Raw Normal View History

/*
* hvc_console.h
* Copyright (C) 2005 IBM Corporation
*
* Author(s):
* Ryan S. Arnold <rsa@us.ibm.com>
*
* hvc_console header information:
* moved here from arch/powerpc/include/asm/hvconsole.h
* and drivers/char/hvc_console.c
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#ifndef HVC_CONSOLE_H
#define HVC_CONSOLE_H
hvc_console: rework setup to replace irq functions with callbacks This patch tries to change hvc_console to not use request_irq/free_irq if the backend does not use irqs. This allows virtio_console to use hvc_console without having a linker reference to request_irq/free_irq. In addition, together with patch 2/3 it improves the performance for virtio console input. (an earlier version of this patch was tested by Yajin on lguest) The irq specific code is moved to hvc_irq.c and selected by the drivers that use irqs (System p, System i, XEN). I replaced "int irq" with the opaque "int data". The request_irq and free_irq calls are replaced with notifier_add and notifier_del. I have also changed the code a bit to call the notifier_add and notifier_del inside the spinlock area as the callbacks are found via hp->ops. Changes since last version: o remove ifdef o reintroduce "irq_requested" as "notified" o cleanups, sparse.. I did not move the timer based polling into a separate polling scheme. I played with several variants, but it seems we need to sleep/schedule in a thread even for irq based consoles, as there are throttleing and buffer size constraints. I also kept hvc_struct defined in hvc_console.h so that hvc_irq.c can access the irq_requested element. Feedback is appreciated. virtio_console is currently the only available console for kvm on s390. I plan to push this change as soon as all affected parties agree on it. I would love to get test results from System p, Xen etc. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2008-06-20 13:24:08 +00:00
#include <linux/kref.h>
#include <linux/tty.h>
#include <linux/spinlock.h>
/*
* This is the max number of console adapters that can/will be found as
* console devices on first stage console init. Any number beyond this range
* can't be used as a console device but is still a valid tty device.
*/
#define MAX_NR_HVC_CONSOLES 16
/*
* The Linux TTY code does not support dynamic addition of tty derived devices
* so we need to know how many tty devices we might need when space is allocated
* for the tty device. Since this driver supports hotplug of vty adapters we
* need to make sure we have enough allocated.
*/
#define HVC_ALLOC_TTY_ADAPTERS 8
hvc_console: rework setup to replace irq functions with callbacks This patch tries to change hvc_console to not use request_irq/free_irq if the backend does not use irqs. This allows virtio_console to use hvc_console without having a linker reference to request_irq/free_irq. In addition, together with patch 2/3 it improves the performance for virtio console input. (an earlier version of this patch was tested by Yajin on lguest) The irq specific code is moved to hvc_irq.c and selected by the drivers that use irqs (System p, System i, XEN). I replaced "int irq" with the opaque "int data". The request_irq and free_irq calls are replaced with notifier_add and notifier_del. I have also changed the code a bit to call the notifier_add and notifier_del inside the spinlock area as the callbacks are found via hp->ops. Changes since last version: o remove ifdef o reintroduce "irq_requested" as "notified" o cleanups, sparse.. I did not move the timer based polling into a separate polling scheme. I played with several variants, but it seems we need to sleep/schedule in a thread even for irq based consoles, as there are throttleing and buffer size constraints. I also kept hvc_struct defined in hvc_console.h so that hvc_irq.c can access the irq_requested element. Feedback is appreciated. virtio_console is currently the only available console for kvm on s390. I plan to push this change as soon as all affected parties agree on it. I would love to get test results from System p, Xen etc. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2008-06-20 13:24:08 +00:00
struct hvc_struct {
struct tty_port port;
hvc_console: rework setup to replace irq functions with callbacks This patch tries to change hvc_console to not use request_irq/free_irq if the backend does not use irqs. This allows virtio_console to use hvc_console without having a linker reference to request_irq/free_irq. In addition, together with patch 2/3 it improves the performance for virtio console input. (an earlier version of this patch was tested by Yajin on lguest) The irq specific code is moved to hvc_irq.c and selected by the drivers that use irqs (System p, System i, XEN). I replaced "int irq" with the opaque "int data". The request_irq and free_irq calls are replaced with notifier_add and notifier_del. I have also changed the code a bit to call the notifier_add and notifier_del inside the spinlock area as the callbacks are found via hp->ops. Changes since last version: o remove ifdef o reintroduce "irq_requested" as "notified" o cleanups, sparse.. I did not move the timer based polling into a separate polling scheme. I played with several variants, but it seems we need to sleep/schedule in a thread even for irq based consoles, as there are throttleing and buffer size constraints. I also kept hvc_struct defined in hvc_console.h so that hvc_irq.c can access the irq_requested element. Feedback is appreciated. virtio_console is currently the only available console for kvm on s390. I plan to push this change as soon as all affected parties agree on it. I would love to get test results from System p, Xen etc. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2008-06-20 13:24:08 +00:00
spinlock_t lock;
int index;
int do_wakeup;
char *outbuf;
int outbuf_size;
int n_outbuf;
uint32_t vtermno;
const struct hv_ops *ops;
hvc_console: rework setup to replace irq functions with callbacks This patch tries to change hvc_console to not use request_irq/free_irq if the backend does not use irqs. This allows virtio_console to use hvc_console without having a linker reference to request_irq/free_irq. In addition, together with patch 2/3 it improves the performance for virtio console input. (an earlier version of this patch was tested by Yajin on lguest) The irq specific code is moved to hvc_irq.c and selected by the drivers that use irqs (System p, System i, XEN). I replaced "int irq" with the opaque "int data". The request_irq and free_irq calls are replaced with notifier_add and notifier_del. I have also changed the code a bit to call the notifier_add and notifier_del inside the spinlock area as the callbacks are found via hp->ops. Changes since last version: o remove ifdef o reintroduce "irq_requested" as "notified" o cleanups, sparse.. I did not move the timer based polling into a separate polling scheme. I played with several variants, but it seems we need to sleep/schedule in a thread even for irq based consoles, as there are throttleing and buffer size constraints. I also kept hvc_struct defined in hvc_console.h so that hvc_irq.c can access the irq_requested element. Feedback is appreciated. virtio_console is currently the only available console for kvm on s390. I plan to push this change as soon as all affected parties agree on it. I would love to get test results from System p, Xen etc. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2008-06-20 13:24:08 +00:00
int irq_requested;
int data;
struct winsize ws;
struct work_struct tty_resize;
hvc_console: rework setup to replace irq functions with callbacks This patch tries to change hvc_console to not use request_irq/free_irq if the backend does not use irqs. This allows virtio_console to use hvc_console without having a linker reference to request_irq/free_irq. In addition, together with patch 2/3 it improves the performance for virtio console input. (an earlier version of this patch was tested by Yajin on lguest) The irq specific code is moved to hvc_irq.c and selected by the drivers that use irqs (System p, System i, XEN). I replaced "int irq" with the opaque "int data". The request_irq and free_irq calls are replaced with notifier_add and notifier_del. I have also changed the code a bit to call the notifier_add and notifier_del inside the spinlock area as the callbacks are found via hp->ops. Changes since last version: o remove ifdef o reintroduce "irq_requested" as "notified" o cleanups, sparse.. I did not move the timer based polling into a separate polling scheme. I played with several variants, but it seems we need to sleep/schedule in a thread even for irq based consoles, as there are throttleing and buffer size constraints. I also kept hvc_struct defined in hvc_console.h so that hvc_irq.c can access the irq_requested element. Feedback is appreciated. virtio_console is currently the only available console for kvm on s390. I plan to push this change as soon as all affected parties agree on it. I would love to get test results from System p, Xen etc. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2008-06-20 13:24:08 +00:00
struct list_head next;
};
/* implemented by a low level driver */
struct hv_ops {
int (*get_chars)(uint32_t vtermno, char *buf, int count);
int (*put_chars)(uint32_t vtermno, const char *buf, int count);
/* Callbacks for notification. Called in open, close and hangup */
hvc_console: rework setup to replace irq functions with callbacks This patch tries to change hvc_console to not use request_irq/free_irq if the backend does not use irqs. This allows virtio_console to use hvc_console without having a linker reference to request_irq/free_irq. In addition, together with patch 2/3 it improves the performance for virtio console input. (an earlier version of this patch was tested by Yajin on lguest) The irq specific code is moved to hvc_irq.c and selected by the drivers that use irqs (System p, System i, XEN). I replaced "int irq" with the opaque "int data". The request_irq and free_irq calls are replaced with notifier_add and notifier_del. I have also changed the code a bit to call the notifier_add and notifier_del inside the spinlock area as the callbacks are found via hp->ops. Changes since last version: o remove ifdef o reintroduce "irq_requested" as "notified" o cleanups, sparse.. I did not move the timer based polling into a separate polling scheme. I played with several variants, but it seems we need to sleep/schedule in a thread even for irq based consoles, as there are throttleing and buffer size constraints. I also kept hvc_struct defined in hvc_console.h so that hvc_irq.c can access the irq_requested element. Feedback is appreciated. virtio_console is currently the only available console for kvm on s390. I plan to push this change as soon as all affected parties agree on it. I would love to get test results from System p, Xen etc. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2008-06-20 13:24:08 +00:00
int (*notifier_add)(struct hvc_struct *hp, int irq);
void (*notifier_del)(struct hvc_struct *hp, int irq);
void (*notifier_hangup)(struct hvc_struct *hp, int irq);
powerpc/pseries: Re-implement HVSI as part of hvc_vio On pseries machines, consoles are provided by the hypervisor using a low level get_chars/put_chars type interface. However, this is really just a transport to the service processor which implements them either as "raw" console (networked consoles, HMC, ...) or as "hvsi" serial ports. The later is a simple packet protocol on top of the raw character interface that is supposed to convey additional "serial port" style semantics. In practice however, all it does is provide a way to read the CD line and set/clear our DTR line, that's it. We currently implement the "raw" protocol as an hvc console backend (/dev/hvcN) and the "hvsi" protocol using a separate tty driver (/dev/hvsi0). However this is quite impractical. The arbitrary difference between the two type of devices has been a major source of user (and distro) confusion. Additionally, there's an additional mini -hvsi implementation in the pseries platform code for our low level debug console and early boot kernel messages, which means code duplication, though that low level variant is impractical as it's incapable of doing the initial protocol negociation to establish the link to the FSP. This essentially replaces the dedicated hvsi driver and the platform udbg code completely by extending the existing hvc_vio backend used in "raw" mode so that: - It now supports HVSI as well - We add support for hvc backend providing tiocm{get,set} - It also provides a udbg interface for early debug and boot console This is overall less code, though this will only be obvious once we remove the old "hvsi" driver, which is still available for now. When the old driver is enabled, the new code still kicks in for the low level udbg console, replacing the old mini implementation in the platform code, it just doesn't provide the higher level "hvc" interface. In addition to producing generally simler code, this has several benefits over our current situation: - The user/distro only has to deal with /dev/hvcN for the hypervisor console, avoiding all sort of confusion that has plagued us in the past - The tty, kernel and low level debug console all use the same code base which supports the full protocol establishment process, thus the console is now available much earlier than it used to be with the old HVSI driver. The kernel console works much earlier and udbg is available much earlier too. Hackers can enable a hard coded very-early debug console as well that works with HVSI (previously that was only supported for the "raw" mode). I've tried to keep the same semantics as hvsi relative to how I react to things like CD changes, with some subtle differences though: - I clear DTR on close if HUPCL is set - Current hvsi triggers a hangup if it detects a up->down transition on CD (you can still open a console with CD down). My new implementation triggers a hangup if the link to the FSP is severed, and severs it upon detecting a up->down transition on CD. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-05-12 03:46:38 +00:00
/* tiocmget/set implementation */
int (*tiocmget)(struct hvc_struct *hp);
int (*tiocmset)(struct hvc_struct *hp, unsigned int set, unsigned int clear);
hvc_console: rework setup to replace irq functions with callbacks This patch tries to change hvc_console to not use request_irq/free_irq if the backend does not use irqs. This allows virtio_console to use hvc_console without having a linker reference to request_irq/free_irq. In addition, together with patch 2/3 it improves the performance for virtio console input. (an earlier version of this patch was tested by Yajin on lguest) The irq specific code is moved to hvc_irq.c and selected by the drivers that use irqs (System p, System i, XEN). I replaced "int irq" with the opaque "int data". The request_irq and free_irq calls are replaced with notifier_add and notifier_del. I have also changed the code a bit to call the notifier_add and notifier_del inside the spinlock area as the callbacks are found via hp->ops. Changes since last version: o remove ifdef o reintroduce "irq_requested" as "notified" o cleanups, sparse.. I did not move the timer based polling into a separate polling scheme. I played with several variants, but it seems we need to sleep/schedule in a thread even for irq based consoles, as there are throttleing and buffer size constraints. I also kept hvc_struct defined in hvc_console.h so that hvc_irq.c can access the irq_requested element. Feedback is appreciated. virtio_console is currently the only available console for kvm on s390. I plan to push this change as soon as all affected parties agree on it. I would love to get test results from System p, Xen etc. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2008-06-20 13:24:08 +00:00
};
/* Register a vterm and a slot index for use as a console (console_init) */
extern int hvc_instantiate(uint32_t vtermno, int index,
const struct hv_ops *ops);
/* register a vterm for hvc tty operation (module_init or hotplug add) */
extern struct hvc_struct * hvc_alloc(uint32_t vtermno, int data,
const struct hv_ops *ops, int outbuf_size);
hvc_console: rework setup to replace irq functions with callbacks This patch tries to change hvc_console to not use request_irq/free_irq if the backend does not use irqs. This allows virtio_console to use hvc_console without having a linker reference to request_irq/free_irq. In addition, together with patch 2/3 it improves the performance for virtio console input. (an earlier version of this patch was tested by Yajin on lguest) The irq specific code is moved to hvc_irq.c and selected by the drivers that use irqs (System p, System i, XEN). I replaced "int irq" with the opaque "int data". The request_irq and free_irq calls are replaced with notifier_add and notifier_del. I have also changed the code a bit to call the notifier_add and notifier_del inside the spinlock area as the callbacks are found via hp->ops. Changes since last version: o remove ifdef o reintroduce "irq_requested" as "notified" o cleanups, sparse.. I did not move the timer based polling into a separate polling scheme. I played with several variants, but it seems we need to sleep/schedule in a thread even for irq based consoles, as there are throttleing and buffer size constraints. I also kept hvc_struct defined in hvc_console.h so that hvc_irq.c can access the irq_requested element. Feedback is appreciated. virtio_console is currently the only available console for kvm on s390. I plan to push this change as soon as all affected parties agree on it. I would love to get test results from System p, Xen etc. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2008-06-20 13:24:08 +00:00
/* remove a vterm from hvc tty operation (module_exit or hotplug remove) */
extern int hvc_remove(struct hvc_struct *hp);
hvc_console: rework setup to replace irq functions with callbacks This patch tries to change hvc_console to not use request_irq/free_irq if the backend does not use irqs. This allows virtio_console to use hvc_console without having a linker reference to request_irq/free_irq. In addition, together with patch 2/3 it improves the performance for virtio console input. (an earlier version of this patch was tested by Yajin on lguest) The irq specific code is moved to hvc_irq.c and selected by the drivers that use irqs (System p, System i, XEN). I replaced "int irq" with the opaque "int data". The request_irq and free_irq calls are replaced with notifier_add and notifier_del. I have also changed the code a bit to call the notifier_add and notifier_del inside the spinlock area as the callbacks are found via hp->ops. Changes since last version: o remove ifdef o reintroduce "irq_requested" as "notified" o cleanups, sparse.. I did not move the timer based polling into a separate polling scheme. I played with several variants, but it seems we need to sleep/schedule in a thread even for irq based consoles, as there are throttleing and buffer size constraints. I also kept hvc_struct defined in hvc_console.h so that hvc_irq.c can access the irq_requested element. Feedback is appreciated. virtio_console is currently the only available console for kvm on s390. I plan to push this change as soon as all affected parties agree on it. I would love to get test results from System p, Xen etc. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2008-06-20 13:24:08 +00:00
/* data available */
int hvc_poll(struct hvc_struct *hp);
void hvc_kick(void);
/* Resize hvc tty terminal window */
extern void __hvc_resize(struct hvc_struct *hp, struct winsize ws);
static inline void hvc_resize(struct hvc_struct *hp, struct winsize ws)
{
unsigned long flags;
spin_lock_irqsave(&hp->lock, flags);
__hvc_resize(hp, ws);
spin_unlock_irqrestore(&hp->lock, flags);
}
hvc_console: rework setup to replace irq functions with callbacks This patch tries to change hvc_console to not use request_irq/free_irq if the backend does not use irqs. This allows virtio_console to use hvc_console without having a linker reference to request_irq/free_irq. In addition, together with patch 2/3 it improves the performance for virtio console input. (an earlier version of this patch was tested by Yajin on lguest) The irq specific code is moved to hvc_irq.c and selected by the drivers that use irqs (System p, System i, XEN). I replaced "int irq" with the opaque "int data". The request_irq and free_irq calls are replaced with notifier_add and notifier_del. I have also changed the code a bit to call the notifier_add and notifier_del inside the spinlock area as the callbacks are found via hp->ops. Changes since last version: o remove ifdef o reintroduce "irq_requested" as "notified" o cleanups, sparse.. I did not move the timer based polling into a separate polling scheme. I played with several variants, but it seems we need to sleep/schedule in a thread even for irq based consoles, as there are throttleing and buffer size constraints. I also kept hvc_struct defined in hvc_console.h so that hvc_irq.c can access the irq_requested element. Feedback is appreciated. virtio_console is currently the only available console for kvm on s390. I plan to push this change as soon as all affected parties agree on it. I would love to get test results from System p, Xen etc. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2008-06-20 13:24:08 +00:00
/* default notifier for irq based notification */
extern int notifier_add_irq(struct hvc_struct *hp, int data);
extern void notifier_del_irq(struct hvc_struct *hp, int data);
extern void notifier_hangup_irq(struct hvc_struct *hp, int data);
hvc_console: rework setup to replace irq functions with callbacks This patch tries to change hvc_console to not use request_irq/free_irq if the backend does not use irqs. This allows virtio_console to use hvc_console without having a linker reference to request_irq/free_irq. In addition, together with patch 2/3 it improves the performance for virtio console input. (an earlier version of this patch was tested by Yajin on lguest) The irq specific code is moved to hvc_irq.c and selected by the drivers that use irqs (System p, System i, XEN). I replaced "int irq" with the opaque "int data". The request_irq and free_irq calls are replaced with notifier_add and notifier_del. I have also changed the code a bit to call the notifier_add and notifier_del inside the spinlock area as the callbacks are found via hp->ops. Changes since last version: o remove ifdef o reintroduce "irq_requested" as "notified" o cleanups, sparse.. I did not move the timer based polling into a separate polling scheme. I played with several variants, but it seems we need to sleep/schedule in a thread even for irq based consoles, as there are throttleing and buffer size constraints. I also kept hvc_struct defined in hvc_console.h so that hvc_irq.c can access the irq_requested element. Feedback is appreciated. virtio_console is currently the only available console for kvm on s390. I plan to push this change as soon as all affected parties agree on it. I would love to get test results from System p, Xen etc. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2008-06-20 13:24:08 +00:00
#if defined(CONFIG_XMON) && defined(CONFIG_SMP)
#include <asm/xmon.h>
#else
static inline int cpus_are_in_xmon(void)
{
return 0;
}
#endif
#endif // HVC_CONSOLE_H