linux/fs/btrfs/scrub.c

3114 lines
88 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (C) 2011, 2012 STRATO. All rights reserved.
*/
#include <linux/blkdev.h>
#include <linux/ratelimit.h>
#include <linux/sched/mm.h>
#include <crypto/hash.h>
#include "ctree.h"
btrfs: handle empty block_group removal for async discard block_group removal is a little tricky. It can race with the extent allocator, the cleaner thread, and balancing. The current path is for a block_group to be added to the unused_bgs list. Then, when the cleaner thread comes around, it starts a transaction and then proceeds with removing the block_group. Extents that are pinned are subsequently removed from the pinned trees and then eventually a discard is issued for the entire block_group. Async discard introduces another player into the game, the discard workqueue. While it has none of the racing issues, the new problem is ensuring we don't leave free space untrimmed prior to forgetting the block_group. This is handled by placing fully free block_groups on a separate discard queue. This is necessary to maintain discarding order as in the future we will slowly trim even fully free block_groups. The ordering helps us make progress on the same block_group rather than say the last fully freed block_group or needing to search through the fully freed block groups at the beginning of a list and insert after. The new order of events is a fully freed block group gets placed on the unused discard queue first. Once it's processed, it will be placed on the unusued_bgs list and then the original sequence of events will happen, just without the final whole block_group discard. The mount flags can change when processing unused_bgs, so when flipping from DISCARD to DISCARD_ASYNC, the unused_bgs must be punted to the discard_list to be trimmed. If we flip off DISCARD_ASYNC, we punt free block groups on the discard_list to the unused_bg queue which will do the final discard for us. Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Dennis Zhou <dennis@kernel.org> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2019-12-14 00:22:15 +00:00
#include "discard.h"
#include "volumes.h"
#include "disk-io.h"
#include "ordered-data.h"
#include "transaction.h"
#include "backref.h"
#include "extent_io.h"
#include "dev-replace.h"
#include "raid56.h"
#include "block-group.h"
btrfs: implement log-structured superblock for ZONED mode Superblock (and its copies) is the only data structure in btrfs which has a fixed location on a device. Since we cannot overwrite in a sequential write required zone, we cannot place superblock in the zone. One easy solution is limiting superblock and copies to be placed only in conventional zones. However, this method has two downsides: one is reduced number of superblock copies. The location of the second copy of superblock is 256GB, which is in a sequential write required zone on typical devices in the market today. So, the number of superblock and copies is limited to be two. Second downside is that we cannot support devices which have no conventional zones at all. To solve these two problems, we employ superblock log writing. It uses two adjacent zones as a circular buffer to write updated superblocks. Once the first zone is filled up, start writing into the second one. Then, when both zones are filled up and before starting to write to the first zone again, it reset the first zone. We can determine the position of the latest superblock by reading write pointer information from a device. One corner case is when both zones are full. For this situation, we read out the last superblock of each zone, and compare them to determine which zone is older. The following zones are reserved as the circular buffer on ZONED btrfs. - The primary superblock: zones 0 and 1 - The first copy: zones 16 and 17 - The second copy: zones 1024 or zone at 256GB which is minimum, and next to it If these reserved zones are conventional, superblock is written fixed at the start of the zone without logging. Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2020-11-10 11:26:14 +00:00
#include "zoned.h"
#include "fs.h"
#include "accessors.h"
#include "file-item.h"
#include "scrub.h"
#include "raid-stripe-tree.h"
/*
* This is only the first step towards a full-features scrub. It reads all
* extent and super block and verifies the checksums. In case a bad checksum
* is found or the extent cannot be read, good data will be written back if
* any can be found.
*
* Future enhancements:
* - In case an unrepairable extent is encountered, track which files are
* affected and report them
* - track and record media errors, throw out bad devices
* - add a mode to also read unallocated space
*/
Btrfs: rename the scrub context structure The device replace procedure makes use of the scrub code. The scrub code is the most efficient code to read the allocated data of a disk, i.e. it reads sequentially in order to avoid disk head movements, it skips unallocated blocks, it uses read ahead mechanisms, and it contains all the code to detect and repair defects. This commit is a first preparation step to adapt the scrub code to be shareable for the device replace procedure. The block device will be removed from the scrub context state structure in a later step. It used to be the source block device. The scrub code as it is used for the device replace procedure reads the source data from whereever it is optimal. The source device might even be gone (disconnected, for instance due to a hardware failure). Or the drive can be so faulty so that the device replace procedure tries to avoid access to the faulty source drive as much as possible, and only if all other mirrors are damaged, as a last resort, the source disk is accessed. The modified scrub code operates as if it would handle the source drive and thereby generates an exact copy of the source disk on the target disk, even if the source disk is not present at all. Therefore the block device pointer to the source disk is removed in a later patch, and therefore the context structure is renamed (this is the goal of the current patch) to reflect that no source block device scope is there anymore. Summary: This first preparation step consists of a textual substitution of the term "dev" to the term "ctx" whereever the scrub context is used. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-02 08:58:09 +00:00
struct scrub_ctx;
/*
* The following value only influences the performance.
*
btrfs: scrub: fix grouping of read IO [REGRESSION] There are several regression reports about the scrub performance with v6.4 kernel. On a PCIe 3.0 device, the old v6.3 kernel can go 3GB/s scrub speed, but v6.4 can only go 1GB/s, an obvious 66% performance drop. [CAUSE] Iostat shows a very different behavior between v6.3 and v6.4 kernel: Device r/s rkB/s rrqm/s %rrqm r_await rareq-sz aqu-sz %util nvme0n1p3 9731.00 3425544.00 17237.00 63.92 2.18 352.02 21.18 100.00 nvme0n1p3 15578.00 993616.00 5.00 0.03 0.09 63.78 1.32 100.00 The upper one is v6.3 while the lower one is v6.4. There are several obvious differences: - Very few read merges This turns out to be a behavior change that we no longer do bio plug/unplug. - Very low aqu-sz This is due to the submit-and-wait behavior of flush_scrub_stripes(), and extra extent/csum tree search. Both behaviors are not that obvious on SATA SSDs, as SATA SSDs have NCQ to merge the reads, while SATA SSDs can not handle high queue depth well either. [FIX] For now this patch focuses on the read speed fix. Dev-replace replace speed needs more work. For the read part, we go two directions to fix the problems: - Re-introduce blk plug/unplug to merge read requests This is pretty simple, and the behavior is pretty easy to observe. This would enlarge the average read request size to 512K. - Introduce multi-group reads and no longer wait for each group Instead of the old behavior, which submits 8 stripes and waits for them, here we would enlarge the total number of stripes to 16 * 8. Which is 8M per device, the same limit as the old scrub in-flight bios size limit. Now every time we fill a group (8 stripes), we submit them and continue to next stripes. Only when the full 16 * 8 stripes are all filled, we submit the remaining ones (the last group), and wait for all groups to finish. Then submit the repair writes and dev-replace writes. This should enlarge the queue depth. This would greatly improve the merge rate (thus read block size) and queue depth: Before (with regression, and cached extent/csum path): Device r/s rkB/s rrqm/s %rrqm r_await rareq-sz aqu-sz %util nvme0n1p3 20666.00 1318240.00 10.00 0.05 0.08 63.79 1.63 100.00 After (with all patches applied): nvme0n1p3 5165.00 2278304.00 30557.00 85.54 0.55 441.10 2.81 100.00 i.e. 1287 to 2224 MB/s. CC: stable@vger.kernel.org # 6.4+ Signed-off-by: Qu Wenruo <wqu@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2023-08-03 06:33:31 +00:00
* This detemines how many stripes would be submitted in one go,
* which is 512KiB (BTRFS_STRIPE_LEN * SCRUB_STRIPES_PER_GROUP).
*/
btrfs: scrub: fix grouping of read IO [REGRESSION] There are several regression reports about the scrub performance with v6.4 kernel. On a PCIe 3.0 device, the old v6.3 kernel can go 3GB/s scrub speed, but v6.4 can only go 1GB/s, an obvious 66% performance drop. [CAUSE] Iostat shows a very different behavior between v6.3 and v6.4 kernel: Device r/s rkB/s rrqm/s %rrqm r_await rareq-sz aqu-sz %util nvme0n1p3 9731.00 3425544.00 17237.00 63.92 2.18 352.02 21.18 100.00 nvme0n1p3 15578.00 993616.00 5.00 0.03 0.09 63.78 1.32 100.00 The upper one is v6.3 while the lower one is v6.4. There are several obvious differences: - Very few read merges This turns out to be a behavior change that we no longer do bio plug/unplug. - Very low aqu-sz This is due to the submit-and-wait behavior of flush_scrub_stripes(), and extra extent/csum tree search. Both behaviors are not that obvious on SATA SSDs, as SATA SSDs have NCQ to merge the reads, while SATA SSDs can not handle high queue depth well either. [FIX] For now this patch focuses on the read speed fix. Dev-replace replace speed needs more work. For the read part, we go two directions to fix the problems: - Re-introduce blk plug/unplug to merge read requests This is pretty simple, and the behavior is pretty easy to observe. This would enlarge the average read request size to 512K. - Introduce multi-group reads and no longer wait for each group Instead of the old behavior, which submits 8 stripes and waits for them, here we would enlarge the total number of stripes to 16 * 8. Which is 8M per device, the same limit as the old scrub in-flight bios size limit. Now every time we fill a group (8 stripes), we submit them and continue to next stripes. Only when the full 16 * 8 stripes are all filled, we submit the remaining ones (the last group), and wait for all groups to finish. Then submit the repair writes and dev-replace writes. This should enlarge the queue depth. This would greatly improve the merge rate (thus read block size) and queue depth: Before (with regression, and cached extent/csum path): Device r/s rkB/s rrqm/s %rrqm r_await rareq-sz aqu-sz %util nvme0n1p3 20666.00 1318240.00 10.00 0.05 0.08 63.79 1.63 100.00 After (with all patches applied): nvme0n1p3 5165.00 2278304.00 30557.00 85.54 0.55 441.10 2.81 100.00 i.e. 1287 to 2224 MB/s. CC: stable@vger.kernel.org # 6.4+ Signed-off-by: Qu Wenruo <wqu@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2023-08-03 06:33:31 +00:00
#define SCRUB_STRIPES_PER_GROUP 8
/*
* How many groups we have for each sctx.
*
* This would be 8M per device, the same value as the old scrub in-flight bios
* size limit.
*/
#define SCRUB_GROUPS_PER_SCTX 16
#define SCRUB_TOTAL_STRIPES (SCRUB_GROUPS_PER_SCTX * SCRUB_STRIPES_PER_GROUP)
/*
* The following value times PAGE_SIZE needs to be large enough to match the
* largest node/leaf/sector size that shall be supported.
*/
#define SCRUB_MAX_SECTORS_PER_BLOCK (BTRFS_MAX_METADATA_BLOCKSIZE / SZ_4K)
/* Represent one sector and its needed info to verify the content. */
struct scrub_sector_verification {
bool is_metadata;
union {
/*
* Csum pointer for data csum verification. Should point to a
* sector csum inside scrub_stripe::csums.
*
* NULL if this data sector has no csum.
*/
u8 *csum;
/*
* Extra info for metadata verification. All sectors inside a
* tree block share the same generation.
*/
u64 generation;
};
};
enum scrub_stripe_flags {
/* Set when @mirror_num, @dev, @physical and @logical are set. */
SCRUB_STRIPE_FLAG_INITIALIZED,
/* Set when the read-repair is finished. */
SCRUB_STRIPE_FLAG_REPAIR_DONE,
/*
* Set for data stripes if it's triggered from P/Q stripe.
* During such scrub, we should not report errors in data stripes, nor
* update the accounting.
*/
SCRUB_STRIPE_FLAG_NO_REPORT,
};
#define SCRUB_STRIPE_PAGES (BTRFS_STRIPE_LEN / PAGE_SIZE)
/*
* Represent one contiguous range with a length of BTRFS_STRIPE_LEN.
*/
struct scrub_stripe {
struct scrub_ctx *sctx;
struct btrfs_block_group *bg;
struct page *pages[SCRUB_STRIPE_PAGES];
struct scrub_sector_verification *sectors;
struct btrfs_device *dev;
u64 logical;
u64 physical;
u16 mirror_num;
/* Should be BTRFS_STRIPE_LEN / sectorsize. */
u16 nr_sectors;
/*
* How many data/meta extents are in this stripe. Only for scrub status
* reporting purposes.
*/
u16 nr_data_extents;
u16 nr_meta_extents;
atomic_t pending_io;
wait_queue_head_t io_wait;
wait_queue_head_t repair_wait;
/*
* Indicate the states of the stripe. Bits are defined in
* scrub_stripe_flags enum.
*/
unsigned long state;
/* Indicate which sectors are covered by extent items. */
unsigned long extent_sector_bitmap;
/*
* The errors hit during the initial read of the stripe.
*
* Would be utilized for error reporting and repair.
btrfs: scrub: also report errors hit during the initial read [BUG] After the recent scrub rework introduced in commit e02ee89baa66 ("btrfs: scrub: switch scrub_simple_mirror() to scrub_stripe infrastructure"), btrfs scrub no longer reports repaired errors any more: # mkfs.btrfs -f $dev -d DUP # mount $dev $mnt # xfs_io -f -d -c "pwrite -b 64K -S 0xaa 0 64" $mnt/file # umount $dev # xfs_io -f -c "pwrite -S 0xff $phy1 64K" $dev # Corrupt the first mirror # mount $dev $mnt # btrfs scrub start -BR $mnt scrub done for 725e7cb7-8a4a-4c77-9f2a-86943619e218 Scrub started: Tue Jun 6 14:56:50 2023 Status: finished Duration: 0:00:00 data_extents_scrubbed: 2 tree_extents_scrubbed: 18 data_bytes_scrubbed: 131072 tree_bytes_scrubbed: 294912 read_errors: 0 csum_errors: 0 <<< No errors here verify_errors: 0 [...] uncorrectable_errors: 0 unverified_errors: 0 corrected_errors: 16 <<< Only corrected errors last_physical: 2723151872 This can confuse btrfs-progs, as it relies on the csum_errors to determine if there is anything wrong. While on v6.3.x kernels, the report is different: csum_errors: 16 <<< verify_errors: 0 [...] uncorrectable_errors: 0 unverified_errors: 0 corrected_errors: 16 <<< [CAUSE] In the reworked scrub, we update the scrub progress inside scrub_stripe_report_errors(), using various bitmaps to update the result. For example for csum_errors, we use bitmap_weight() of stripe->csum_error_bitmap. Unfortunately at that stage, all error bitmaps (except init_error_bitmap) are the result of the latest repair attempt, thus if the stripe is fully repaired, those error bitmaps will all be empty, resulting the above output mismatch. To fix this, record the number of errors into stripe->init_nr_*_errors. Since we don't really care about where those errors are, we only need to record the number of errors. Then in scrub_stripe_report_errors(), use those initial numbers to update the progress other than using the latest error bitmaps. Fixes: e02ee89baa66 ("btrfs: scrub: switch scrub_simple_mirror() to scrub_stripe infrastructure") Signed-off-by: Qu Wenruo <wqu@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2023-06-06 07:08:28 +00:00
*
* The remaining init_nr_* records the number of errors hit, only used
* by error reporting.
*/
unsigned long init_error_bitmap;
btrfs: scrub: also report errors hit during the initial read [BUG] After the recent scrub rework introduced in commit e02ee89baa66 ("btrfs: scrub: switch scrub_simple_mirror() to scrub_stripe infrastructure"), btrfs scrub no longer reports repaired errors any more: # mkfs.btrfs -f $dev -d DUP # mount $dev $mnt # xfs_io -f -d -c "pwrite -b 64K -S 0xaa 0 64" $mnt/file # umount $dev # xfs_io -f -c "pwrite -S 0xff $phy1 64K" $dev # Corrupt the first mirror # mount $dev $mnt # btrfs scrub start -BR $mnt scrub done for 725e7cb7-8a4a-4c77-9f2a-86943619e218 Scrub started: Tue Jun 6 14:56:50 2023 Status: finished Duration: 0:00:00 data_extents_scrubbed: 2 tree_extents_scrubbed: 18 data_bytes_scrubbed: 131072 tree_bytes_scrubbed: 294912 read_errors: 0 csum_errors: 0 <<< No errors here verify_errors: 0 [...] uncorrectable_errors: 0 unverified_errors: 0 corrected_errors: 16 <<< Only corrected errors last_physical: 2723151872 This can confuse btrfs-progs, as it relies on the csum_errors to determine if there is anything wrong. While on v6.3.x kernels, the report is different: csum_errors: 16 <<< verify_errors: 0 [...] uncorrectable_errors: 0 unverified_errors: 0 corrected_errors: 16 <<< [CAUSE] In the reworked scrub, we update the scrub progress inside scrub_stripe_report_errors(), using various bitmaps to update the result. For example for csum_errors, we use bitmap_weight() of stripe->csum_error_bitmap. Unfortunately at that stage, all error bitmaps (except init_error_bitmap) are the result of the latest repair attempt, thus if the stripe is fully repaired, those error bitmaps will all be empty, resulting the above output mismatch. To fix this, record the number of errors into stripe->init_nr_*_errors. Since we don't really care about where those errors are, we only need to record the number of errors. Then in scrub_stripe_report_errors(), use those initial numbers to update the progress other than using the latest error bitmaps. Fixes: e02ee89baa66 ("btrfs: scrub: switch scrub_simple_mirror() to scrub_stripe infrastructure") Signed-off-by: Qu Wenruo <wqu@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2023-06-06 07:08:28 +00:00
unsigned int init_nr_io_errors;
unsigned int init_nr_csum_errors;
unsigned int init_nr_meta_errors;
/*
* The following error bitmaps are all for the current status.
* Every time we submit a new read, these bitmaps may be updated.
*
* error_bitmap = io_error_bitmap | csum_error_bitmap | meta_error_bitmap;
*
* IO and csum errors can happen for both metadata and data.
*/
unsigned long error_bitmap;
unsigned long io_error_bitmap;
unsigned long csum_error_bitmap;
unsigned long meta_error_bitmap;
/* For writeback (repair or replace) error reporting. */
unsigned long write_error_bitmap;
/* Writeback can be concurrent, thus we need to protect the bitmap. */
spinlock_t write_error_lock;
/*
* Checksum for the whole stripe if this stripe is inside a data block
* group.
*/
u8 *csums;
struct work_struct work;
};
Btrfs: rename the scrub context structure The device replace procedure makes use of the scrub code. The scrub code is the most efficient code to read the allocated data of a disk, i.e. it reads sequentially in order to avoid disk head movements, it skips unallocated blocks, it uses read ahead mechanisms, and it contains all the code to detect and repair defects. This commit is a first preparation step to adapt the scrub code to be shareable for the device replace procedure. The block device will be removed from the scrub context state structure in a later step. It used to be the source block device. The scrub code as it is used for the device replace procedure reads the source data from whereever it is optimal. The source device might even be gone (disconnected, for instance due to a hardware failure). Or the drive can be so faulty so that the device replace procedure tries to avoid access to the faulty source drive as much as possible, and only if all other mirrors are damaged, as a last resort, the source disk is accessed. The modified scrub code operates as if it would handle the source drive and thereby generates an exact copy of the source disk on the target disk, even if the source disk is not present at all. Therefore the block device pointer to the source disk is removed in a later patch, and therefore the context structure is renamed (this is the goal of the current patch) to reflect that no source block device scope is there anymore. Summary: This first preparation step consists of a textual substitution of the term "dev" to the term "ctx" whereever the scrub context is used. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-02 08:58:09 +00:00
struct scrub_ctx {
btrfs: scrub: fix grouping of read IO [REGRESSION] There are several regression reports about the scrub performance with v6.4 kernel. On a PCIe 3.0 device, the old v6.3 kernel can go 3GB/s scrub speed, but v6.4 can only go 1GB/s, an obvious 66% performance drop. [CAUSE] Iostat shows a very different behavior between v6.3 and v6.4 kernel: Device r/s rkB/s rrqm/s %rrqm r_await rareq-sz aqu-sz %util nvme0n1p3 9731.00 3425544.00 17237.00 63.92 2.18 352.02 21.18 100.00 nvme0n1p3 15578.00 993616.00 5.00 0.03 0.09 63.78 1.32 100.00 The upper one is v6.3 while the lower one is v6.4. There are several obvious differences: - Very few read merges This turns out to be a behavior change that we no longer do bio plug/unplug. - Very low aqu-sz This is due to the submit-and-wait behavior of flush_scrub_stripes(), and extra extent/csum tree search. Both behaviors are not that obvious on SATA SSDs, as SATA SSDs have NCQ to merge the reads, while SATA SSDs can not handle high queue depth well either. [FIX] For now this patch focuses on the read speed fix. Dev-replace replace speed needs more work. For the read part, we go two directions to fix the problems: - Re-introduce blk plug/unplug to merge read requests This is pretty simple, and the behavior is pretty easy to observe. This would enlarge the average read request size to 512K. - Introduce multi-group reads and no longer wait for each group Instead of the old behavior, which submits 8 stripes and waits for them, here we would enlarge the total number of stripes to 16 * 8. Which is 8M per device, the same limit as the old scrub in-flight bios size limit. Now every time we fill a group (8 stripes), we submit them and continue to next stripes. Only when the full 16 * 8 stripes are all filled, we submit the remaining ones (the last group), and wait for all groups to finish. Then submit the repair writes and dev-replace writes. This should enlarge the queue depth. This would greatly improve the merge rate (thus read block size) and queue depth: Before (with regression, and cached extent/csum path): Device r/s rkB/s rrqm/s %rrqm r_await rareq-sz aqu-sz %util nvme0n1p3 20666.00 1318240.00 10.00 0.05 0.08 63.79 1.63 100.00 After (with all patches applied): nvme0n1p3 5165.00 2278304.00 30557.00 85.54 0.55 441.10 2.81 100.00 i.e. 1287 to 2224 MB/s. CC: stable@vger.kernel.org # 6.4+ Signed-off-by: Qu Wenruo <wqu@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2023-08-03 06:33:31 +00:00
struct scrub_stripe stripes[SCRUB_TOTAL_STRIPES];
struct scrub_stripe *raid56_data_stripes;
struct btrfs_fs_info *fs_info;
struct btrfs_path extent_path;
struct btrfs_path csum_path;
int first_free;
int cur_stripe;
atomic_t cancel_req;
int readonly;
int sectors_per_bio;
btrfs: scrub: per-device bandwidth control Add sysfs interface to limit io during scrub. We relied on the ionice interface to do that, eg. the idle class let the system usable while scrub was running. This has changed when mq-deadline got widespread and did not implement the scheduling classes. That was a CFQ thing that got deleted. We've got numerous complaints from users about degraded performance. Currently only BFQ supports that but it's not a common scheduler and we can't ask everybody to switch to it. Alternatively the cgroup io limiting can be used but that also a non-trivial setup (v2 required, the controller must be enabled on the system). This can still be used if desired. Other ideas that have been explored: piggy-back on ionice (that is set per-process and is accessible) and interpret the class and classdata as bandwidth limits, but this does not have enough flexibility as there are only 8 allowed and we'd have to map fixed limits to each value. Also adjusting the value would need to lookup the process that currently runs scrub on the given device, and the value is not sticky so would have to be adjusted each time scrub runs. Running out of options, sysfs does not look that bad: - it's accessible from scripts, or udev rules - the name is similar to what MD-RAID has (/proc/sys/dev/raid/speed_limit_max or /sys/block/mdX/md/sync_speed_max) - the value is sticky at least for filesystem mount time - adjusting the value has immediate effect - sysfs is available in constrained environments (eg. system rescue) - the limit also applies to device replace Sysfs: - raw value is in bytes - values written to the file accept suffixes like K, M - file is in the per-device directory /sys/fs/btrfs/FSID/devinfo/DEVID/scrub_speed_max - 0 means use default priority of IO The scheduler is a simple deadline one and the accuracy is up to nearest 128K. Signed-off-by: David Sterba <dsterba@suse.com>
2019-10-09 11:58:13 +00:00
/* State of IO submission throttling affecting the associated device */
ktime_t throttle_deadline;
u64 throttle_sent;
int is_dev_replace;
u64 write_pointer;
struct mutex wr_lock;
struct btrfs_device *wr_tgtdev;
/*
* statistics
*/
struct btrfs_scrub_progress stat;
spinlock_t stat_lock;
Btrfs: scrub, fix sleep in atomic context My previous patch "Btrfs: fix scrub race leading to use-after-free" introduced the possibility to sleep in an atomic context, which happens when the scrub_lock mutex is held at the time scrub_pending_bio_dec() is called - this function can be called under an atomic context. Chris ran into this in a debug kernel which gave the following trace: [ 1928.950319] BUG: sleeping function called from invalid context at kernel/locking/mutex.c:621 [ 1928.967334] in_atomic(): 1, irqs_disabled(): 0, pid: 149670, name: fsstress [ 1928.981324] INFO: lockdep is turned off. [ 1928.989244] CPU: 24 PID: 149670 Comm: fsstress Tainted: G W 3.19.0-rc7-mason+ #41 [ 1929.006418] Hardware name: ZTSYSTEMS Echo Ridge T4 /A9DRPF-10D, BIOS 1.07 05/10/2012 [ 1929.022207] ffffffff81a22cf8 ffff881076e03b78 ffffffff816b8dd9 ffff881076e03b78 [ 1929.037267] ffff880d8e828710 ffff881076e03ba8 ffffffff810856c4 ffff881076e03bc8 [ 1929.052315] 0000000000000000 000000000000026d ffffffff81a22cf8 ffff881076e03bd8 [ 1929.067381] Call Trace: [ 1929.072344] <IRQ> [<ffffffff816b8dd9>] dump_stack+0x4f/0x6e [ 1929.083968] [<ffffffff810856c4>] ___might_sleep+0x174/0x230 [ 1929.095352] [<ffffffff810857d2>] __might_sleep+0x52/0x90 [ 1929.106223] [<ffffffff816bb68f>] mutex_lock_nested+0x2f/0x3b0 [ 1929.117951] [<ffffffff810ab37d>] ? trace_hardirqs_on+0xd/0x10 [ 1929.129708] [<ffffffffa05dc838>] scrub_pending_bio_dec+0x38/0x70 [btrfs] [ 1929.143370] [<ffffffffa05dd0e0>] scrub_parity_bio_endio+0x50/0x70 [btrfs] [ 1929.157191] [<ffffffff812fa603>] bio_endio+0x53/0xa0 [ 1929.167382] [<ffffffffa05f96bc>] rbio_orig_end_io+0x7c/0xa0 [btrfs] [ 1929.180161] [<ffffffffa05f97ba>] raid_write_parity_end_io+0x5a/0x80 [btrfs] [ 1929.194318] [<ffffffff812fa603>] bio_endio+0x53/0xa0 [ 1929.204496] [<ffffffff8130401b>] blk_update_request+0x1eb/0x450 [ 1929.216569] [<ffffffff81096e58>] ? trigger_load_balance+0x78/0x500 [ 1929.229176] [<ffffffff8144c74d>] scsi_end_request+0x3d/0x1f0 [ 1929.240740] [<ffffffff8144ccac>] scsi_io_completion+0xac/0x5b0 [ 1929.252654] [<ffffffff81441c50>] scsi_finish_command+0xf0/0x150 [ 1929.264725] [<ffffffff8144d317>] scsi_softirq_done+0x147/0x170 [ 1929.276635] [<ffffffff8130ace6>] blk_done_softirq+0x86/0xa0 [ 1929.288014] [<ffffffff8105d92e>] __do_softirq+0xde/0x600 [ 1929.298885] [<ffffffff8105df6d>] irq_exit+0xbd/0xd0 (...) Fix this by using a reference count on the scrub context structure instead of locking the scrub_lock mutex. Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Chris Mason <clm@fb.com>
2015-02-09 21:14:24 +00:00
/*
* Use a ref counter to avoid use-after-free issues. Scrub workers
* decrement bios_in_flight and workers_pending and then do a wakeup
* on the list_wait wait queue. We must ensure the main scrub task
* doesn't free the scrub context before or while the workers are
* doing the wakeup() call.
*/
refcount_t refs;
};
struct scrub_warning {
struct btrfs_path *path;
u64 extent_item_size;
const char *errstr;
u64 physical;
u64 logical;
struct btrfs_device *dev;
};
static void release_scrub_stripe(struct scrub_stripe *stripe)
{
if (!stripe)
return;
for (int i = 0; i < SCRUB_STRIPE_PAGES; i++) {
if (stripe->pages[i])
__free_page(stripe->pages[i]);
stripe->pages[i] = NULL;
}
kfree(stripe->sectors);
kfree(stripe->csums);
stripe->sectors = NULL;
stripe->csums = NULL;
stripe->sctx = NULL;
stripe->state = 0;
}
static int init_scrub_stripe(struct btrfs_fs_info *fs_info,
struct scrub_stripe *stripe)
{
int ret;
memset(stripe, 0, sizeof(*stripe));
stripe->nr_sectors = BTRFS_STRIPE_LEN >> fs_info->sectorsize_bits;
stripe->state = 0;
init_waitqueue_head(&stripe->io_wait);
init_waitqueue_head(&stripe->repair_wait);
atomic_set(&stripe->pending_io, 0);
spin_lock_init(&stripe->write_error_lock);
ret = btrfs_alloc_page_array(SCRUB_STRIPE_PAGES, stripe->pages);
if (ret < 0)
goto error;
stripe->sectors = kcalloc(stripe->nr_sectors,
sizeof(struct scrub_sector_verification),
GFP_KERNEL);
if (!stripe->sectors)
goto error;
stripe->csums = kcalloc(BTRFS_STRIPE_LEN >> fs_info->sectorsize_bits,
fs_info->csum_size, GFP_KERNEL);
if (!stripe->csums)
goto error;
return 0;
error:
release_scrub_stripe(stripe);
return -ENOMEM;
}
static void wait_scrub_stripe_io(struct scrub_stripe *stripe)
{
wait_event(stripe->io_wait, atomic_read(&stripe->pending_io) == 0);
}
Btrfs: scrub, fix sleep in atomic context My previous patch "Btrfs: fix scrub race leading to use-after-free" introduced the possibility to sleep in an atomic context, which happens when the scrub_lock mutex is held at the time scrub_pending_bio_dec() is called - this function can be called under an atomic context. Chris ran into this in a debug kernel which gave the following trace: [ 1928.950319] BUG: sleeping function called from invalid context at kernel/locking/mutex.c:621 [ 1928.967334] in_atomic(): 1, irqs_disabled(): 0, pid: 149670, name: fsstress [ 1928.981324] INFO: lockdep is turned off. [ 1928.989244] CPU: 24 PID: 149670 Comm: fsstress Tainted: G W 3.19.0-rc7-mason+ #41 [ 1929.006418] Hardware name: ZTSYSTEMS Echo Ridge T4 /A9DRPF-10D, BIOS 1.07 05/10/2012 [ 1929.022207] ffffffff81a22cf8 ffff881076e03b78 ffffffff816b8dd9 ffff881076e03b78 [ 1929.037267] ffff880d8e828710 ffff881076e03ba8 ffffffff810856c4 ffff881076e03bc8 [ 1929.052315] 0000000000000000 000000000000026d ffffffff81a22cf8 ffff881076e03bd8 [ 1929.067381] Call Trace: [ 1929.072344] <IRQ> [<ffffffff816b8dd9>] dump_stack+0x4f/0x6e [ 1929.083968] [<ffffffff810856c4>] ___might_sleep+0x174/0x230 [ 1929.095352] [<ffffffff810857d2>] __might_sleep+0x52/0x90 [ 1929.106223] [<ffffffff816bb68f>] mutex_lock_nested+0x2f/0x3b0 [ 1929.117951] [<ffffffff810ab37d>] ? trace_hardirqs_on+0xd/0x10 [ 1929.129708] [<ffffffffa05dc838>] scrub_pending_bio_dec+0x38/0x70 [btrfs] [ 1929.143370] [<ffffffffa05dd0e0>] scrub_parity_bio_endio+0x50/0x70 [btrfs] [ 1929.157191] [<ffffffff812fa603>] bio_endio+0x53/0xa0 [ 1929.167382] [<ffffffffa05f96bc>] rbio_orig_end_io+0x7c/0xa0 [btrfs] [ 1929.180161] [<ffffffffa05f97ba>] raid_write_parity_end_io+0x5a/0x80 [btrfs] [ 1929.194318] [<ffffffff812fa603>] bio_endio+0x53/0xa0 [ 1929.204496] [<ffffffff8130401b>] blk_update_request+0x1eb/0x450 [ 1929.216569] [<ffffffff81096e58>] ? trigger_load_balance+0x78/0x500 [ 1929.229176] [<ffffffff8144c74d>] scsi_end_request+0x3d/0x1f0 [ 1929.240740] [<ffffffff8144ccac>] scsi_io_completion+0xac/0x5b0 [ 1929.252654] [<ffffffff81441c50>] scsi_finish_command+0xf0/0x150 [ 1929.264725] [<ffffffff8144d317>] scsi_softirq_done+0x147/0x170 [ 1929.276635] [<ffffffff8130ace6>] blk_done_softirq+0x86/0xa0 [ 1929.288014] [<ffffffff8105d92e>] __do_softirq+0xde/0x600 [ 1929.298885] [<ffffffff8105df6d>] irq_exit+0xbd/0xd0 (...) Fix this by using a reference count on the scrub context structure instead of locking the scrub_lock mutex. Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Chris Mason <clm@fb.com>
2015-02-09 21:14:24 +00:00
static void scrub_put_ctx(struct scrub_ctx *sctx);
static void __scrub_blocked_if_needed(struct btrfs_fs_info *fs_info)
{
while (atomic_read(&fs_info->scrub_pause_req)) {
mutex_unlock(&fs_info->scrub_lock);
wait_event(fs_info->scrub_pause_wait,
atomic_read(&fs_info->scrub_pause_req) == 0);
mutex_lock(&fs_info->scrub_lock);
}
}
static void scrub_pause_on(struct btrfs_fs_info *fs_info)
{
atomic_inc(&fs_info->scrubs_paused);
wake_up(&fs_info->scrub_pause_wait);
}
static void scrub_pause_off(struct btrfs_fs_info *fs_info)
{
mutex_lock(&fs_info->scrub_lock);
__scrub_blocked_if_needed(fs_info);
atomic_dec(&fs_info->scrubs_paused);
mutex_unlock(&fs_info->scrub_lock);
wake_up(&fs_info->scrub_pause_wait);
}
static void scrub_blocked_if_needed(struct btrfs_fs_info *fs_info)
{
scrub_pause_on(fs_info);
scrub_pause_off(fs_info);
}
Btrfs: rename the scrub context structure The device replace procedure makes use of the scrub code. The scrub code is the most efficient code to read the allocated data of a disk, i.e. it reads sequentially in order to avoid disk head movements, it skips unallocated blocks, it uses read ahead mechanisms, and it contains all the code to detect and repair defects. This commit is a first preparation step to adapt the scrub code to be shareable for the device replace procedure. The block device will be removed from the scrub context state structure in a later step. It used to be the source block device. The scrub code as it is used for the device replace procedure reads the source data from whereever it is optimal. The source device might even be gone (disconnected, for instance due to a hardware failure). Or the drive can be so faulty so that the device replace procedure tries to avoid access to the faulty source drive as much as possible, and only if all other mirrors are damaged, as a last resort, the source disk is accessed. The modified scrub code operates as if it would handle the source drive and thereby generates an exact copy of the source disk on the target disk, even if the source disk is not present at all. Therefore the block device pointer to the source disk is removed in a later patch, and therefore the context structure is renamed (this is the goal of the current patch) to reflect that no source block device scope is there anymore. Summary: This first preparation step consists of a textual substitution of the term "dev" to the term "ctx" whereever the scrub context is used. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-02 08:58:09 +00:00
static noinline_for_stack void scrub_free_ctx(struct scrub_ctx *sctx)
{
int i;
Btrfs: rename the scrub context structure The device replace procedure makes use of the scrub code. The scrub code is the most efficient code to read the allocated data of a disk, i.e. it reads sequentially in order to avoid disk head movements, it skips unallocated blocks, it uses read ahead mechanisms, and it contains all the code to detect and repair defects. This commit is a first preparation step to adapt the scrub code to be shareable for the device replace procedure. The block device will be removed from the scrub context state structure in a later step. It used to be the source block device. The scrub code as it is used for the device replace procedure reads the source data from whereever it is optimal. The source device might even be gone (disconnected, for instance due to a hardware failure). Or the drive can be so faulty so that the device replace procedure tries to avoid access to the faulty source drive as much as possible, and only if all other mirrors are damaged, as a last resort, the source disk is accessed. The modified scrub code operates as if it would handle the source drive and thereby generates an exact copy of the source disk on the target disk, even if the source disk is not present at all. Therefore the block device pointer to the source disk is removed in a later patch, and therefore the context structure is renamed (this is the goal of the current patch) to reflect that no source block device scope is there anymore. Summary: This first preparation step consists of a textual substitution of the term "dev" to the term "ctx" whereever the scrub context is used. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-02 08:58:09 +00:00
if (!sctx)
return;
btrfs: scrub: fix grouping of read IO [REGRESSION] There are several regression reports about the scrub performance with v6.4 kernel. On a PCIe 3.0 device, the old v6.3 kernel can go 3GB/s scrub speed, but v6.4 can only go 1GB/s, an obvious 66% performance drop. [CAUSE] Iostat shows a very different behavior between v6.3 and v6.4 kernel: Device r/s rkB/s rrqm/s %rrqm r_await rareq-sz aqu-sz %util nvme0n1p3 9731.00 3425544.00 17237.00 63.92 2.18 352.02 21.18 100.00 nvme0n1p3 15578.00 993616.00 5.00 0.03 0.09 63.78 1.32 100.00 The upper one is v6.3 while the lower one is v6.4. There are several obvious differences: - Very few read merges This turns out to be a behavior change that we no longer do bio plug/unplug. - Very low aqu-sz This is due to the submit-and-wait behavior of flush_scrub_stripes(), and extra extent/csum tree search. Both behaviors are not that obvious on SATA SSDs, as SATA SSDs have NCQ to merge the reads, while SATA SSDs can not handle high queue depth well either. [FIX] For now this patch focuses on the read speed fix. Dev-replace replace speed needs more work. For the read part, we go two directions to fix the problems: - Re-introduce blk plug/unplug to merge read requests This is pretty simple, and the behavior is pretty easy to observe. This would enlarge the average read request size to 512K. - Introduce multi-group reads and no longer wait for each group Instead of the old behavior, which submits 8 stripes and waits for them, here we would enlarge the total number of stripes to 16 * 8. Which is 8M per device, the same limit as the old scrub in-flight bios size limit. Now every time we fill a group (8 stripes), we submit them and continue to next stripes. Only when the full 16 * 8 stripes are all filled, we submit the remaining ones (the last group), and wait for all groups to finish. Then submit the repair writes and dev-replace writes. This should enlarge the queue depth. This would greatly improve the merge rate (thus read block size) and queue depth: Before (with regression, and cached extent/csum path): Device r/s rkB/s rrqm/s %rrqm r_await rareq-sz aqu-sz %util nvme0n1p3 20666.00 1318240.00 10.00 0.05 0.08 63.79 1.63 100.00 After (with all patches applied): nvme0n1p3 5165.00 2278304.00 30557.00 85.54 0.55 441.10 2.81 100.00 i.e. 1287 to 2224 MB/s. CC: stable@vger.kernel.org # 6.4+ Signed-off-by: Qu Wenruo <wqu@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2023-08-03 06:33:31 +00:00
for (i = 0; i < SCRUB_TOTAL_STRIPES; i++)
release_scrub_stripe(&sctx->stripes[i]);
btrfs: scrub: fix grouping of read IO [REGRESSION] There are several regression reports about the scrub performance with v6.4 kernel. On a PCIe 3.0 device, the old v6.3 kernel can go 3GB/s scrub speed, but v6.4 can only go 1GB/s, an obvious 66% performance drop. [CAUSE] Iostat shows a very different behavior between v6.3 and v6.4 kernel: Device r/s rkB/s rrqm/s %rrqm r_await rareq-sz aqu-sz %util nvme0n1p3 9731.00 3425544.00 17237.00 63.92 2.18 352.02 21.18 100.00 nvme0n1p3 15578.00 993616.00 5.00 0.03 0.09 63.78 1.32 100.00 The upper one is v6.3 while the lower one is v6.4. There are several obvious differences: - Very few read merges This turns out to be a behavior change that we no longer do bio plug/unplug. - Very low aqu-sz This is due to the submit-and-wait behavior of flush_scrub_stripes(), and extra extent/csum tree search. Both behaviors are not that obvious on SATA SSDs, as SATA SSDs have NCQ to merge the reads, while SATA SSDs can not handle high queue depth well either. [FIX] For now this patch focuses on the read speed fix. Dev-replace replace speed needs more work. For the read part, we go two directions to fix the problems: - Re-introduce blk plug/unplug to merge read requests This is pretty simple, and the behavior is pretty easy to observe. This would enlarge the average read request size to 512K. - Introduce multi-group reads and no longer wait for each group Instead of the old behavior, which submits 8 stripes and waits for them, here we would enlarge the total number of stripes to 16 * 8. Which is 8M per device, the same limit as the old scrub in-flight bios size limit. Now every time we fill a group (8 stripes), we submit them and continue to next stripes. Only when the full 16 * 8 stripes are all filled, we submit the remaining ones (the last group), and wait for all groups to finish. Then submit the repair writes and dev-replace writes. This should enlarge the queue depth. This would greatly improve the merge rate (thus read block size) and queue depth: Before (with regression, and cached extent/csum path): Device r/s rkB/s rrqm/s %rrqm r_await rareq-sz aqu-sz %util nvme0n1p3 20666.00 1318240.00 10.00 0.05 0.08 63.79 1.63 100.00 After (with all patches applied): nvme0n1p3 5165.00 2278304.00 30557.00 85.54 0.55 441.10 2.81 100.00 i.e. 1287 to 2224 MB/s. CC: stable@vger.kernel.org # 6.4+ Signed-off-by: Qu Wenruo <wqu@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2023-08-03 06:33:31 +00:00
kvfree(sctx);
}
Btrfs: scrub, fix sleep in atomic context My previous patch "Btrfs: fix scrub race leading to use-after-free" introduced the possibility to sleep in an atomic context, which happens when the scrub_lock mutex is held at the time scrub_pending_bio_dec() is called - this function can be called under an atomic context. Chris ran into this in a debug kernel which gave the following trace: [ 1928.950319] BUG: sleeping function called from invalid context at kernel/locking/mutex.c:621 [ 1928.967334] in_atomic(): 1, irqs_disabled(): 0, pid: 149670, name: fsstress [ 1928.981324] INFO: lockdep is turned off. [ 1928.989244] CPU: 24 PID: 149670 Comm: fsstress Tainted: G W 3.19.0-rc7-mason+ #41 [ 1929.006418] Hardware name: ZTSYSTEMS Echo Ridge T4 /A9DRPF-10D, BIOS 1.07 05/10/2012 [ 1929.022207] ffffffff81a22cf8 ffff881076e03b78 ffffffff816b8dd9 ffff881076e03b78 [ 1929.037267] ffff880d8e828710 ffff881076e03ba8 ffffffff810856c4 ffff881076e03bc8 [ 1929.052315] 0000000000000000 000000000000026d ffffffff81a22cf8 ffff881076e03bd8 [ 1929.067381] Call Trace: [ 1929.072344] <IRQ> [<ffffffff816b8dd9>] dump_stack+0x4f/0x6e [ 1929.083968] [<ffffffff810856c4>] ___might_sleep+0x174/0x230 [ 1929.095352] [<ffffffff810857d2>] __might_sleep+0x52/0x90 [ 1929.106223] [<ffffffff816bb68f>] mutex_lock_nested+0x2f/0x3b0 [ 1929.117951] [<ffffffff810ab37d>] ? trace_hardirqs_on+0xd/0x10 [ 1929.129708] [<ffffffffa05dc838>] scrub_pending_bio_dec+0x38/0x70 [btrfs] [ 1929.143370] [<ffffffffa05dd0e0>] scrub_parity_bio_endio+0x50/0x70 [btrfs] [ 1929.157191] [<ffffffff812fa603>] bio_endio+0x53/0xa0 [ 1929.167382] [<ffffffffa05f96bc>] rbio_orig_end_io+0x7c/0xa0 [btrfs] [ 1929.180161] [<ffffffffa05f97ba>] raid_write_parity_end_io+0x5a/0x80 [btrfs] [ 1929.194318] [<ffffffff812fa603>] bio_endio+0x53/0xa0 [ 1929.204496] [<ffffffff8130401b>] blk_update_request+0x1eb/0x450 [ 1929.216569] [<ffffffff81096e58>] ? trigger_load_balance+0x78/0x500 [ 1929.229176] [<ffffffff8144c74d>] scsi_end_request+0x3d/0x1f0 [ 1929.240740] [<ffffffff8144ccac>] scsi_io_completion+0xac/0x5b0 [ 1929.252654] [<ffffffff81441c50>] scsi_finish_command+0xf0/0x150 [ 1929.264725] [<ffffffff8144d317>] scsi_softirq_done+0x147/0x170 [ 1929.276635] [<ffffffff8130ace6>] blk_done_softirq+0x86/0xa0 [ 1929.288014] [<ffffffff8105d92e>] __do_softirq+0xde/0x600 [ 1929.298885] [<ffffffff8105df6d>] irq_exit+0xbd/0xd0 (...) Fix this by using a reference count on the scrub context structure instead of locking the scrub_lock mutex. Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Chris Mason <clm@fb.com>
2015-02-09 21:14:24 +00:00
static void scrub_put_ctx(struct scrub_ctx *sctx)
{
if (refcount_dec_and_test(&sctx->refs))
Btrfs: scrub, fix sleep in atomic context My previous patch "Btrfs: fix scrub race leading to use-after-free" introduced the possibility to sleep in an atomic context, which happens when the scrub_lock mutex is held at the time scrub_pending_bio_dec() is called - this function can be called under an atomic context. Chris ran into this in a debug kernel which gave the following trace: [ 1928.950319] BUG: sleeping function called from invalid context at kernel/locking/mutex.c:621 [ 1928.967334] in_atomic(): 1, irqs_disabled(): 0, pid: 149670, name: fsstress [ 1928.981324] INFO: lockdep is turned off. [ 1928.989244] CPU: 24 PID: 149670 Comm: fsstress Tainted: G W 3.19.0-rc7-mason+ #41 [ 1929.006418] Hardware name: ZTSYSTEMS Echo Ridge T4 /A9DRPF-10D, BIOS 1.07 05/10/2012 [ 1929.022207] ffffffff81a22cf8 ffff881076e03b78 ffffffff816b8dd9 ffff881076e03b78 [ 1929.037267] ffff880d8e828710 ffff881076e03ba8 ffffffff810856c4 ffff881076e03bc8 [ 1929.052315] 0000000000000000 000000000000026d ffffffff81a22cf8 ffff881076e03bd8 [ 1929.067381] Call Trace: [ 1929.072344] <IRQ> [<ffffffff816b8dd9>] dump_stack+0x4f/0x6e [ 1929.083968] [<ffffffff810856c4>] ___might_sleep+0x174/0x230 [ 1929.095352] [<ffffffff810857d2>] __might_sleep+0x52/0x90 [ 1929.106223] [<ffffffff816bb68f>] mutex_lock_nested+0x2f/0x3b0 [ 1929.117951] [<ffffffff810ab37d>] ? trace_hardirqs_on+0xd/0x10 [ 1929.129708] [<ffffffffa05dc838>] scrub_pending_bio_dec+0x38/0x70 [btrfs] [ 1929.143370] [<ffffffffa05dd0e0>] scrub_parity_bio_endio+0x50/0x70 [btrfs] [ 1929.157191] [<ffffffff812fa603>] bio_endio+0x53/0xa0 [ 1929.167382] [<ffffffffa05f96bc>] rbio_orig_end_io+0x7c/0xa0 [btrfs] [ 1929.180161] [<ffffffffa05f97ba>] raid_write_parity_end_io+0x5a/0x80 [btrfs] [ 1929.194318] [<ffffffff812fa603>] bio_endio+0x53/0xa0 [ 1929.204496] [<ffffffff8130401b>] blk_update_request+0x1eb/0x450 [ 1929.216569] [<ffffffff81096e58>] ? trigger_load_balance+0x78/0x500 [ 1929.229176] [<ffffffff8144c74d>] scsi_end_request+0x3d/0x1f0 [ 1929.240740] [<ffffffff8144ccac>] scsi_io_completion+0xac/0x5b0 [ 1929.252654] [<ffffffff81441c50>] scsi_finish_command+0xf0/0x150 [ 1929.264725] [<ffffffff8144d317>] scsi_softirq_done+0x147/0x170 [ 1929.276635] [<ffffffff8130ace6>] blk_done_softirq+0x86/0xa0 [ 1929.288014] [<ffffffff8105d92e>] __do_softirq+0xde/0x600 [ 1929.298885] [<ffffffff8105df6d>] irq_exit+0xbd/0xd0 (...) Fix this by using a reference count on the scrub context structure instead of locking the scrub_lock mutex. Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Chris Mason <clm@fb.com>
2015-02-09 21:14:24 +00:00
scrub_free_ctx(sctx);
}
static noinline_for_stack struct scrub_ctx *scrub_setup_ctx(
struct btrfs_fs_info *fs_info, int is_dev_replace)
{
Btrfs: rename the scrub context structure The device replace procedure makes use of the scrub code. The scrub code is the most efficient code to read the allocated data of a disk, i.e. it reads sequentially in order to avoid disk head movements, it skips unallocated blocks, it uses read ahead mechanisms, and it contains all the code to detect and repair defects. This commit is a first preparation step to adapt the scrub code to be shareable for the device replace procedure. The block device will be removed from the scrub context state structure in a later step. It used to be the source block device. The scrub code as it is used for the device replace procedure reads the source data from whereever it is optimal. The source device might even be gone (disconnected, for instance due to a hardware failure). Or the drive can be so faulty so that the device replace procedure tries to avoid access to the faulty source drive as much as possible, and only if all other mirrors are damaged, as a last resort, the source disk is accessed. The modified scrub code operates as if it would handle the source drive and thereby generates an exact copy of the source disk on the target disk, even if the source disk is not present at all. Therefore the block device pointer to the source disk is removed in a later patch, and therefore the context structure is renamed (this is the goal of the current patch) to reflect that no source block device scope is there anymore. Summary: This first preparation step consists of a textual substitution of the term "dev" to the term "ctx" whereever the scrub context is used. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-02 08:58:09 +00:00
struct scrub_ctx *sctx;
int i;
btrfs: scrub: fix grouping of read IO [REGRESSION] There are several regression reports about the scrub performance with v6.4 kernel. On a PCIe 3.0 device, the old v6.3 kernel can go 3GB/s scrub speed, but v6.4 can only go 1GB/s, an obvious 66% performance drop. [CAUSE] Iostat shows a very different behavior between v6.3 and v6.4 kernel: Device r/s rkB/s rrqm/s %rrqm r_await rareq-sz aqu-sz %util nvme0n1p3 9731.00 3425544.00 17237.00 63.92 2.18 352.02 21.18 100.00 nvme0n1p3 15578.00 993616.00 5.00 0.03 0.09 63.78 1.32 100.00 The upper one is v6.3 while the lower one is v6.4. There are several obvious differences: - Very few read merges This turns out to be a behavior change that we no longer do bio plug/unplug. - Very low aqu-sz This is due to the submit-and-wait behavior of flush_scrub_stripes(), and extra extent/csum tree search. Both behaviors are not that obvious on SATA SSDs, as SATA SSDs have NCQ to merge the reads, while SATA SSDs can not handle high queue depth well either. [FIX] For now this patch focuses on the read speed fix. Dev-replace replace speed needs more work. For the read part, we go two directions to fix the problems: - Re-introduce blk plug/unplug to merge read requests This is pretty simple, and the behavior is pretty easy to observe. This would enlarge the average read request size to 512K. - Introduce multi-group reads and no longer wait for each group Instead of the old behavior, which submits 8 stripes and waits for them, here we would enlarge the total number of stripes to 16 * 8. Which is 8M per device, the same limit as the old scrub in-flight bios size limit. Now every time we fill a group (8 stripes), we submit them and continue to next stripes. Only when the full 16 * 8 stripes are all filled, we submit the remaining ones (the last group), and wait for all groups to finish. Then submit the repair writes and dev-replace writes. This should enlarge the queue depth. This would greatly improve the merge rate (thus read block size) and queue depth: Before (with regression, and cached extent/csum path): Device r/s rkB/s rrqm/s %rrqm r_await rareq-sz aqu-sz %util nvme0n1p3 20666.00 1318240.00 10.00 0.05 0.08 63.79 1.63 100.00 After (with all patches applied): nvme0n1p3 5165.00 2278304.00 30557.00 85.54 0.55 441.10 2.81 100.00 i.e. 1287 to 2224 MB/s. CC: stable@vger.kernel.org # 6.4+ Signed-off-by: Qu Wenruo <wqu@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2023-08-03 06:33:31 +00:00
/* Since sctx has inline 128 stripes, it can go beyond 64K easily. Use
* kvzalloc().
*/
sctx = kvzalloc(sizeof(*sctx), GFP_KERNEL);
Btrfs: rename the scrub context structure The device replace procedure makes use of the scrub code. The scrub code is the most efficient code to read the allocated data of a disk, i.e. it reads sequentially in order to avoid disk head movements, it skips unallocated blocks, it uses read ahead mechanisms, and it contains all the code to detect and repair defects. This commit is a first preparation step to adapt the scrub code to be shareable for the device replace procedure. The block device will be removed from the scrub context state structure in a later step. It used to be the source block device. The scrub code as it is used for the device replace procedure reads the source data from whereever it is optimal. The source device might even be gone (disconnected, for instance due to a hardware failure). Or the drive can be so faulty so that the device replace procedure tries to avoid access to the faulty source drive as much as possible, and only if all other mirrors are damaged, as a last resort, the source disk is accessed. The modified scrub code operates as if it would handle the source drive and thereby generates an exact copy of the source disk on the target disk, even if the source disk is not present at all. Therefore the block device pointer to the source disk is removed in a later patch, and therefore the context structure is renamed (this is the goal of the current patch) to reflect that no source block device scope is there anymore. Summary: This first preparation step consists of a textual substitution of the term "dev" to the term "ctx" whereever the scrub context is used. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-02 08:58:09 +00:00
if (!sctx)
goto nomem;
refcount_set(&sctx->refs, 1);
sctx->is_dev_replace = is_dev_replace;
sctx->fs_info = fs_info;
sctx->extent_path.search_commit_root = 1;
sctx->extent_path.skip_locking = 1;
sctx->csum_path.search_commit_root = 1;
sctx->csum_path.skip_locking = 1;
btrfs: scrub: fix grouping of read IO [REGRESSION] There are several regression reports about the scrub performance with v6.4 kernel. On a PCIe 3.0 device, the old v6.3 kernel can go 3GB/s scrub speed, but v6.4 can only go 1GB/s, an obvious 66% performance drop. [CAUSE] Iostat shows a very different behavior between v6.3 and v6.4 kernel: Device r/s rkB/s rrqm/s %rrqm r_await rareq-sz aqu-sz %util nvme0n1p3 9731.00 3425544.00 17237.00 63.92 2.18 352.02 21.18 100.00 nvme0n1p3 15578.00 993616.00 5.00 0.03 0.09 63.78 1.32 100.00 The upper one is v6.3 while the lower one is v6.4. There are several obvious differences: - Very few read merges This turns out to be a behavior change that we no longer do bio plug/unplug. - Very low aqu-sz This is due to the submit-and-wait behavior of flush_scrub_stripes(), and extra extent/csum tree search. Both behaviors are not that obvious on SATA SSDs, as SATA SSDs have NCQ to merge the reads, while SATA SSDs can not handle high queue depth well either. [FIX] For now this patch focuses on the read speed fix. Dev-replace replace speed needs more work. For the read part, we go two directions to fix the problems: - Re-introduce blk plug/unplug to merge read requests This is pretty simple, and the behavior is pretty easy to observe. This would enlarge the average read request size to 512K. - Introduce multi-group reads and no longer wait for each group Instead of the old behavior, which submits 8 stripes and waits for them, here we would enlarge the total number of stripes to 16 * 8. Which is 8M per device, the same limit as the old scrub in-flight bios size limit. Now every time we fill a group (8 stripes), we submit them and continue to next stripes. Only when the full 16 * 8 stripes are all filled, we submit the remaining ones (the last group), and wait for all groups to finish. Then submit the repair writes and dev-replace writes. This should enlarge the queue depth. This would greatly improve the merge rate (thus read block size) and queue depth: Before (with regression, and cached extent/csum path): Device r/s rkB/s rrqm/s %rrqm r_await rareq-sz aqu-sz %util nvme0n1p3 20666.00 1318240.00 10.00 0.05 0.08 63.79 1.63 100.00 After (with all patches applied): nvme0n1p3 5165.00 2278304.00 30557.00 85.54 0.55 441.10 2.81 100.00 i.e. 1287 to 2224 MB/s. CC: stable@vger.kernel.org # 6.4+ Signed-off-by: Qu Wenruo <wqu@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2023-08-03 06:33:31 +00:00
for (i = 0; i < SCRUB_TOTAL_STRIPES; i++) {
int ret;
ret = init_scrub_stripe(fs_info, &sctx->stripes[i]);
if (ret < 0)
goto nomem;
sctx->stripes[i].sctx = sctx;
}
Btrfs: rename the scrub context structure The device replace procedure makes use of the scrub code. The scrub code is the most efficient code to read the allocated data of a disk, i.e. it reads sequentially in order to avoid disk head movements, it skips unallocated blocks, it uses read ahead mechanisms, and it contains all the code to detect and repair defects. This commit is a first preparation step to adapt the scrub code to be shareable for the device replace procedure. The block device will be removed from the scrub context state structure in a later step. It used to be the source block device. The scrub code as it is used for the device replace procedure reads the source data from whereever it is optimal. The source device might even be gone (disconnected, for instance due to a hardware failure). Or the drive can be so faulty so that the device replace procedure tries to avoid access to the faulty source drive as much as possible, and only if all other mirrors are damaged, as a last resort, the source disk is accessed. The modified scrub code operates as if it would handle the source drive and thereby generates an exact copy of the source disk on the target disk, even if the source disk is not present at all. Therefore the block device pointer to the source disk is removed in a later patch, and therefore the context structure is renamed (this is the goal of the current patch) to reflect that no source block device scope is there anymore. Summary: This first preparation step consists of a textual substitution of the term "dev" to the term "ctx" whereever the scrub context is used. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-02 08:58:09 +00:00
sctx->first_free = 0;
atomic_set(&sctx->cancel_req, 0);
spin_lock_init(&sctx->stat_lock);
btrfs: scrub: per-device bandwidth control Add sysfs interface to limit io during scrub. We relied on the ionice interface to do that, eg. the idle class let the system usable while scrub was running. This has changed when mq-deadline got widespread and did not implement the scheduling classes. That was a CFQ thing that got deleted. We've got numerous complaints from users about degraded performance. Currently only BFQ supports that but it's not a common scheduler and we can't ask everybody to switch to it. Alternatively the cgroup io limiting can be used but that also a non-trivial setup (v2 required, the controller must be enabled on the system). This can still be used if desired. Other ideas that have been explored: piggy-back on ionice (that is set per-process and is accessible) and interpret the class and classdata as bandwidth limits, but this does not have enough flexibility as there are only 8 allowed and we'd have to map fixed limits to each value. Also adjusting the value would need to lookup the process that currently runs scrub on the given device, and the value is not sticky so would have to be adjusted each time scrub runs. Running out of options, sysfs does not look that bad: - it's accessible from scripts, or udev rules - the name is similar to what MD-RAID has (/proc/sys/dev/raid/speed_limit_max or /sys/block/mdX/md/sync_speed_max) - the value is sticky at least for filesystem mount time - adjusting the value has immediate effect - sysfs is available in constrained environments (eg. system rescue) - the limit also applies to device replace Sysfs: - raw value is in bytes - values written to the file accept suffixes like K, M - file is in the per-device directory /sys/fs/btrfs/FSID/devinfo/DEVID/scrub_speed_max - 0 means use default priority of IO The scheduler is a simple deadline one and the accuracy is up to nearest 128K. Signed-off-by: David Sterba <dsterba@suse.com>
2019-10-09 11:58:13 +00:00
sctx->throttle_deadline = 0;
mutex_init(&sctx->wr_lock);
if (is_dev_replace) {
WARN_ON(!fs_info->dev_replace.tgtdev);
sctx->wr_tgtdev = fs_info->dev_replace.tgtdev;
}
Btrfs: rename the scrub context structure The device replace procedure makes use of the scrub code. The scrub code is the most efficient code to read the allocated data of a disk, i.e. it reads sequentially in order to avoid disk head movements, it skips unallocated blocks, it uses read ahead mechanisms, and it contains all the code to detect and repair defects. This commit is a first preparation step to adapt the scrub code to be shareable for the device replace procedure. The block device will be removed from the scrub context state structure in a later step. It used to be the source block device. The scrub code as it is used for the device replace procedure reads the source data from whereever it is optimal. The source device might even be gone (disconnected, for instance due to a hardware failure). Or the drive can be so faulty so that the device replace procedure tries to avoid access to the faulty source drive as much as possible, and only if all other mirrors are damaged, as a last resort, the source disk is accessed. The modified scrub code operates as if it would handle the source drive and thereby generates an exact copy of the source disk on the target disk, even if the source disk is not present at all. Therefore the block device pointer to the source disk is removed in a later patch, and therefore the context structure is renamed (this is the goal of the current patch) to reflect that no source block device scope is there anymore. Summary: This first preparation step consists of a textual substitution of the term "dev" to the term "ctx" whereever the scrub context is used. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-02 08:58:09 +00:00
return sctx;
nomem:
Btrfs: rename the scrub context structure The device replace procedure makes use of the scrub code. The scrub code is the most efficient code to read the allocated data of a disk, i.e. it reads sequentially in order to avoid disk head movements, it skips unallocated blocks, it uses read ahead mechanisms, and it contains all the code to detect and repair defects. This commit is a first preparation step to adapt the scrub code to be shareable for the device replace procedure. The block device will be removed from the scrub context state structure in a later step. It used to be the source block device. The scrub code as it is used for the device replace procedure reads the source data from whereever it is optimal. The source device might even be gone (disconnected, for instance due to a hardware failure). Or the drive can be so faulty so that the device replace procedure tries to avoid access to the faulty source drive as much as possible, and only if all other mirrors are damaged, as a last resort, the source disk is accessed. The modified scrub code operates as if it would handle the source drive and thereby generates an exact copy of the source disk on the target disk, even if the source disk is not present at all. Therefore the block device pointer to the source disk is removed in a later patch, and therefore the context structure is renamed (this is the goal of the current patch) to reflect that no source block device scope is there anymore. Summary: This first preparation step consists of a textual substitution of the term "dev" to the term "ctx" whereever the scrub context is used. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-02 08:58:09 +00:00
scrub_free_ctx(sctx);
return ERR_PTR(-ENOMEM);
}
btrfs: send: optimize clone detection to increase extent sharing Currently send does not do the best decisions when it comes to decide between multiple clone sources, which results in clone operations for partial extent ranges, which has the following disadvantages: 1) We get less shared extents at the destination; 2) We have to read more data during the send operation and emit more write commands. Besides not being optimal behaviour, it also breaks user expectations and is often reported by users, with a recent example in the Link tag at the bottom of this change log. Part of the reason for this non-optimal behaviour is that the backref walking code does not provide information about the length of the file extent items that were found for each backref, so send is blind about which backref is the best to chose as a cloning source. The other existing reasons are just silliness, namely always prefering the inode with the lowest number when multiple are found for the same root and when we can clone from multiple roots, always prefer the send root over any of the other clone roots. This does not make any sense since any inode or root is fine and as good as any other inode/root. Fix this by making backref walking pass information about the number of bytes referenced by each file extent item and then have send's backref callback pick the inode with the highest number of bytes for each root. Finally select the root from which we can clone more bytes from. Example reproducer: $ cat test.sh #!/bin/bash DEV=/dev/sdi MNT=/mnt/sdi mkfs.btrfs -f $DEV mount $DEV $MNT xfs_io -f -c "pwrite -S 0xab -b 2M 0 2M" $MNT/foo cp --reflink=always $MNT/foo $MNT/bar cp --reflink=always $MNT/foo $MNT/baz sync # Overwrite the second half of file foo. xfs_io -c "pwrite -S 0xcd -b 1M 1M 1M" $MNT/foo sync echo echo "*** fiemap in the original filesystem ***" echo xfs_io -c "fiemap -v" $MNT/foo xfs_io -c "fiemap -v" $MNT/bar xfs_io -c "fiemap -v" $MNT/baz echo btrfs filesystem du $MNT btrfs subvolume snapshot -r $MNT $MNT/snap btrfs send -f /tmp/send_stream $MNT/snap umount $MNT mkfs.btrfs -f $DEV &> /dev/null mount $DEV $MNT btrfs receive -f /tmp/send_stream $MNT echo echo "*** fiemap in the new filesystem ***" echo xfs_io -r -c "fiemap -v" $MNT/snap/foo xfs_io -r -c "fiemap -v" $MNT/snap/bar xfs_io -r -c "fiemap -v" $MNT/snap/baz echo btrfs filesystem du $MNT rm -f /tmp/send_stream rm -f /tmp/snap.fssum umount $MNT Before this change: $ ./test.sh (...) *** fiemap in the original filesystem *** /mnt/sdi/foo: EXT: FILE-OFFSET BLOCK-RANGE TOTAL FLAGS 0: [0..2047]: 26624..28671 2048 0x2000 1: [2048..4095]: 30720..32767 2048 0x1 /mnt/sdi/bar: EXT: FILE-OFFSET BLOCK-RANGE TOTAL FLAGS 0: [0..4095]: 26624..30719 4096 0x2001 /mnt/sdi/baz: EXT: FILE-OFFSET BLOCK-RANGE TOTAL FLAGS 0: [0..4095]: 26624..30719 4096 0x2001 Total Exclusive Set shared Filename 2.00MiB 1.00MiB - /mnt/sdi/foo 2.00MiB 0.00B - /mnt/sdi/bar 2.00MiB 0.00B - /mnt/sdi/baz 6.00MiB 1.00MiB 2.00MiB /mnt/sdi Create a readonly snapshot of '/mnt/sdi' in '/mnt/sdi/snap' At subvol /mnt/sdi/snap At subvol snap *** fiemap in the new filesystem *** /mnt/sdi/snap/foo: EXT: FILE-OFFSET BLOCK-RANGE TOTAL FLAGS 0: [0..4095]: 26624..30719 4096 0x2001 /mnt/sdi/snap/bar: EXT: FILE-OFFSET BLOCK-RANGE TOTAL FLAGS 0: [0..2047]: 26624..28671 2048 0x2000 1: [2048..4095]: 30720..32767 2048 0x1 /mnt/sdi/snap/baz: EXT: FILE-OFFSET BLOCK-RANGE TOTAL FLAGS 0: [0..2047]: 26624..28671 2048 0x2000 1: [2048..4095]: 32768..34815 2048 0x1 Total Exclusive Set shared Filename 2.00MiB 0.00B - /mnt/sdi/snap/foo 2.00MiB 1.00MiB - /mnt/sdi/snap/bar 2.00MiB 1.00MiB - /mnt/sdi/snap/baz 6.00MiB 2.00MiB - /mnt/sdi/snap 6.00MiB 2.00MiB 2.00MiB /mnt/sdi We end up with two 1M extents that are not shared for files bar and baz. After this change: $ ./test.sh (...) *** fiemap in the original filesystem *** /mnt/sdi/foo: EXT: FILE-OFFSET BLOCK-RANGE TOTAL FLAGS 0: [0..2047]: 26624..28671 2048 0x2000 1: [2048..4095]: 30720..32767 2048 0x1 /mnt/sdi/bar: EXT: FILE-OFFSET BLOCK-RANGE TOTAL FLAGS 0: [0..4095]: 26624..30719 4096 0x2001 /mnt/sdi/baz: EXT: FILE-OFFSET BLOCK-RANGE TOTAL FLAGS 0: [0..4095]: 26624..30719 4096 0x2001 Total Exclusive Set shared Filename 2.00MiB 1.00MiB - /mnt/sdi/foo 2.00MiB 0.00B - /mnt/sdi/bar 2.00MiB 0.00B - /mnt/sdi/baz 6.00MiB 1.00MiB 2.00MiB /mnt/sdi Create a readonly snapshot of '/mnt/sdi' in '/mnt/sdi/snap' At subvol /mnt/sdi/snap At subvol snap *** fiemap in the new filesystem *** /mnt/sdi/snap/foo: EXT: FILE-OFFSET BLOCK-RANGE TOTAL FLAGS 0: [0..4095]: 26624..30719 4096 0x2001 /mnt/sdi/snap/bar: EXT: FILE-OFFSET BLOCK-RANGE TOTAL FLAGS 0: [0..2047]: 26624..28671 2048 0x2000 1: [2048..4095]: 30720..32767 2048 0x2001 /mnt/sdi/snap/baz: EXT: FILE-OFFSET BLOCK-RANGE TOTAL FLAGS 0: [0..2047]: 26624..28671 2048 0x2000 1: [2048..4095]: 30720..32767 2048 0x2001 Total Exclusive Set shared Filename 2.00MiB 0.00B - /mnt/sdi/snap/foo 2.00MiB 0.00B - /mnt/sdi/snap/bar 2.00MiB 0.00B - /mnt/sdi/snap/baz 6.00MiB 0.00B - /mnt/sdi/snap 6.00MiB 0.00B 3.00MiB /mnt/sdi Now there's a much better sharing, files bar and baz share 1M of the extent of file foo and the second extent of files bar and baz is shared between themselves. This will later be turned into a test case for fstests. Link: https://lore.kernel.org/linux-btrfs/20221008005704.795b44b0@crass-HP-ZBook-15-G2/ Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2022-11-01 16:15:45 +00:00
static int scrub_print_warning_inode(u64 inum, u64 offset, u64 num_bytes,
u64 root, void *warn_ctx)
{
u32 nlink;
int ret;
int i;
unsigned nofs_flag;
struct extent_buffer *eb;
struct btrfs_inode_item *inode_item;
struct scrub_warning *swarn = warn_ctx;
struct btrfs_fs_info *fs_info = swarn->dev->fs_info;
struct inode_fs_paths *ipath = NULL;
struct btrfs_root *local_root;
struct btrfs_key key;
local_root = btrfs_get_fs_root(fs_info, root, true);
if (IS_ERR(local_root)) {
ret = PTR_ERR(local_root);
goto err;
}
/*
* this makes the path point to (inum INODE_ITEM ioff)
*/
key.objectid = inum;
key.type = BTRFS_INODE_ITEM_KEY;
key.offset = 0;
ret = btrfs_search_slot(NULL, local_root, &key, swarn->path, 0, 0);
if (ret) {
btrfs_put_root(local_root);
btrfs_release_path(swarn->path);
goto err;
}
eb = swarn->path->nodes[0];
inode_item = btrfs_item_ptr(eb, swarn->path->slots[0],
struct btrfs_inode_item);
nlink = btrfs_inode_nlink(eb, inode_item);
btrfs_release_path(swarn->path);
/*
* init_path might indirectly call vmalloc, or use GFP_KERNEL. Scrub
* uses GFP_NOFS in this context, so we keep it consistent but it does
* not seem to be strictly necessary.
*/
nofs_flag = memalloc_nofs_save();
ipath = init_ipath(4096, local_root, swarn->path);
memalloc_nofs_restore(nofs_flag);
if (IS_ERR(ipath)) {
btrfs_put_root(local_root);
ret = PTR_ERR(ipath);
ipath = NULL;
goto err;
}
ret = paths_from_inode(inum, ipath);
if (ret < 0)
goto err;
/*
* we deliberately ignore the bit ipath might have been too small to
* hold all of the paths here
*/
for (i = 0; i < ipath->fspath->elem_cnt; ++i)
btrfs_warn_in_rcu(fs_info,
btrfs: scrub: fix subpage repair error caused by hard coded PAGE_SIZE [BUG] For the following file layout, scrub will not be able to repair all these two repairable error, but in fact make one corruption even unrepairable: inode offset 0 4k 8K Mirror 1 |XXXXXX| | Mirror 2 | |XXXXXX| [CAUSE] The root cause is the hard coded PAGE_SIZE, which makes scrub repair to go crazy for subpage. For above case, when reading the first sector, we use PAGE_SIZE other than sectorsize to read, which makes us to read the full range [0, 64K). In fact, after 8K there may be no data at all, we can just get some garbage. Then when doing the repair, we also writeback a full page from mirror 2, this means, we will also writeback the corrupted data in mirror 2 back to mirror 1, leaving the range [4K, 8K) unrepairable. [FIX] This patch will modify the following PAGE_SIZE use with sectorsize: - scrub_print_warning_inode() Remove the min() and replace PAGE_SIZE with sectorsize. The min() makes no sense, as csum is done for the full sector with padding. This fixes a bug that subpage report extra length like: checksum error at logical 298844160 on dev /dev/mapper/arm_nvme-test, physical 575668224, root 5, inode 257, offset 0, length 12288, links 1 (path: file) Where the error is only 1 sector. - scrub_handle_errored_block() Comments with PAGE|page involved, all changed to sector. - scrub_setup_recheck_block() - scrub_repair_page_from_good_copy() - scrub_add_page_to_wr_bio() - scrub_wr_submit() - scrub_add_page_to_rd_bio() - scrub_block_complete() Replace PAGE_SIZE with sectorsize. This solves several problems where we read/write extra range for subpage case. RAID56 code is excluded intentionally, as RAID56 has extra PAGE_SIZE usage, and is not really safe enough. Thus we will reject RAID56 for subpage in later commit. Signed-off-by: Qu Wenruo <wqu@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2021-04-22 11:02:46 +00:00
"%s at logical %llu on dev %s, physical %llu, root %llu, inode %llu, offset %llu, length %u, links %u (path: %s)",
swarn->errstr, swarn->logical,
btrfs_dev_name(swarn->dev),
swarn->physical,
root, inum, offset,
btrfs: scrub: fix subpage repair error caused by hard coded PAGE_SIZE [BUG] For the following file layout, scrub will not be able to repair all these two repairable error, but in fact make one corruption even unrepairable: inode offset 0 4k 8K Mirror 1 |XXXXXX| | Mirror 2 | |XXXXXX| [CAUSE] The root cause is the hard coded PAGE_SIZE, which makes scrub repair to go crazy for subpage. For above case, when reading the first sector, we use PAGE_SIZE other than sectorsize to read, which makes us to read the full range [0, 64K). In fact, after 8K there may be no data at all, we can just get some garbage. Then when doing the repair, we also writeback a full page from mirror 2, this means, we will also writeback the corrupted data in mirror 2 back to mirror 1, leaving the range [4K, 8K) unrepairable. [FIX] This patch will modify the following PAGE_SIZE use with sectorsize: - scrub_print_warning_inode() Remove the min() and replace PAGE_SIZE with sectorsize. The min() makes no sense, as csum is done for the full sector with padding. This fixes a bug that subpage report extra length like: checksum error at logical 298844160 on dev /dev/mapper/arm_nvme-test, physical 575668224, root 5, inode 257, offset 0, length 12288, links 1 (path: file) Where the error is only 1 sector. - scrub_handle_errored_block() Comments with PAGE|page involved, all changed to sector. - scrub_setup_recheck_block() - scrub_repair_page_from_good_copy() - scrub_add_page_to_wr_bio() - scrub_wr_submit() - scrub_add_page_to_rd_bio() - scrub_block_complete() Replace PAGE_SIZE with sectorsize. This solves several problems where we read/write extra range for subpage case. RAID56 code is excluded intentionally, as RAID56 has extra PAGE_SIZE usage, and is not really safe enough. Thus we will reject RAID56 for subpage in later commit. Signed-off-by: Qu Wenruo <wqu@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2021-04-22 11:02:46 +00:00
fs_info->sectorsize, nlink,
(char *)(unsigned long)ipath->fspath->val[i]);
btrfs_put_root(local_root);
free_ipath(ipath);
return 0;
err:
btrfs_warn_in_rcu(fs_info,
"%s at logical %llu on dev %s, physical %llu, root %llu, inode %llu, offset %llu: path resolving failed with ret=%d",
swarn->errstr, swarn->logical,
btrfs_dev_name(swarn->dev),
swarn->physical,
root, inum, offset, ret);
free_ipath(ipath);
return 0;
}
static void scrub_print_common_warning(const char *errstr, struct btrfs_device *dev,
bool is_super, u64 logical, u64 physical)
{
struct btrfs_fs_info *fs_info = dev->fs_info;
struct btrfs_path *path;
struct btrfs_key found_key;
struct extent_buffer *eb;
struct btrfs_extent_item *ei;
struct scrub_warning swarn;
u64 flags = 0;
u32 item_size;
int ret;
btrfs: scrub: properly report super block errors in system log [PROBLEM] Unlike data/metadata corruption, if scrub detected some error in the super block, the only error message is from the updated device status: BTRFS info (device dm-1): scrub: started on devid 2 BTRFS error (device dm-1): bdev /dev/mapper/test-scratch2 errs: wr 0, rd 0, flush 0, corrupt 1, gen 0 BTRFS info (device dm-1): scrub: finished on devid 2 with status: 0 This is not helpful at all. [CAUSE] Unlike data/metadata error reporting, there is no visible report in kernel dmesg to report supper block errors. In fact, return value of scrub_checksum_super() is intentionally skipped, thus scrub_handle_errored_block() will never be called for super blocks. [FIX] Make super block errors to output an error message, now the full dmesg would looks like this: BTRFS info (device dm-1): scrub: started on devid 2 BTRFS warning (device dm-1): super block error on device /dev/mapper/test-scratch2, physical 67108864 BTRFS error (device dm-1): bdev /dev/mapper/test-scratch2 errs: wr 0, rd 0, flush 0, corrupt 1, gen 0 BTRFS info (device dm-1): scrub: finished on devid 2 with status: 0 BTRFS info (device dm-1): scrub: started on devid 2 This fix involves: - Move the super_errors reporting to scrub_handle_errored_block() This allows the device status message to show after the super block error message. But now we no longer distinguish super block corruption and generation mismatch, now all counted as corruption. - Properly check the return value from scrub_checksum_super() - Add extra super block error reporting for scrub_print_warning(). Signed-off-by: Qu Wenruo <wqu@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2022-08-02 06:53:02 +00:00
/* Super block error, no need to search extent tree. */
if (is_super) {
btrfs: scrub: properly report super block errors in system log [PROBLEM] Unlike data/metadata corruption, if scrub detected some error in the super block, the only error message is from the updated device status: BTRFS info (device dm-1): scrub: started on devid 2 BTRFS error (device dm-1): bdev /dev/mapper/test-scratch2 errs: wr 0, rd 0, flush 0, corrupt 1, gen 0 BTRFS info (device dm-1): scrub: finished on devid 2 with status: 0 This is not helpful at all. [CAUSE] Unlike data/metadata error reporting, there is no visible report in kernel dmesg to report supper block errors. In fact, return value of scrub_checksum_super() is intentionally skipped, thus scrub_handle_errored_block() will never be called for super blocks. [FIX] Make super block errors to output an error message, now the full dmesg would looks like this: BTRFS info (device dm-1): scrub: started on devid 2 BTRFS warning (device dm-1): super block error on device /dev/mapper/test-scratch2, physical 67108864 BTRFS error (device dm-1): bdev /dev/mapper/test-scratch2 errs: wr 0, rd 0, flush 0, corrupt 1, gen 0 BTRFS info (device dm-1): scrub: finished on devid 2 with status: 0 BTRFS info (device dm-1): scrub: started on devid 2 This fix involves: - Move the super_errors reporting to scrub_handle_errored_block() This allows the device status message to show after the super block error message. But now we no longer distinguish super block corruption and generation mismatch, now all counted as corruption. - Properly check the return value from scrub_checksum_super() - Add extra super block error reporting for scrub_print_warning(). Signed-off-by: Qu Wenruo <wqu@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2022-08-02 06:53:02 +00:00
btrfs_warn_in_rcu(fs_info, "%s on device %s, physical %llu",
errstr, btrfs_dev_name(dev), physical);
btrfs: scrub: properly report super block errors in system log [PROBLEM] Unlike data/metadata corruption, if scrub detected some error in the super block, the only error message is from the updated device status: BTRFS info (device dm-1): scrub: started on devid 2 BTRFS error (device dm-1): bdev /dev/mapper/test-scratch2 errs: wr 0, rd 0, flush 0, corrupt 1, gen 0 BTRFS info (device dm-1): scrub: finished on devid 2 with status: 0 This is not helpful at all. [CAUSE] Unlike data/metadata error reporting, there is no visible report in kernel dmesg to report supper block errors. In fact, return value of scrub_checksum_super() is intentionally skipped, thus scrub_handle_errored_block() will never be called for super blocks. [FIX] Make super block errors to output an error message, now the full dmesg would looks like this: BTRFS info (device dm-1): scrub: started on devid 2 BTRFS warning (device dm-1): super block error on device /dev/mapper/test-scratch2, physical 67108864 BTRFS error (device dm-1): bdev /dev/mapper/test-scratch2 errs: wr 0, rd 0, flush 0, corrupt 1, gen 0 BTRFS info (device dm-1): scrub: finished on devid 2 with status: 0 BTRFS info (device dm-1): scrub: started on devid 2 This fix involves: - Move the super_errors reporting to scrub_handle_errored_block() This allows the device status message to show after the super block error message. But now we no longer distinguish super block corruption and generation mismatch, now all counted as corruption. - Properly check the return value from scrub_checksum_super() - Add extra super block error reporting for scrub_print_warning(). Signed-off-by: Qu Wenruo <wqu@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2022-08-02 06:53:02 +00:00
return;
}
path = btrfs_alloc_path();
if (!path)
return;
swarn.physical = physical;
swarn.logical = logical;
swarn.errstr = errstr;
swarn.dev = NULL;
ret = extent_from_logical(fs_info, swarn.logical, path, &found_key,
&flags);
if (ret < 0)
goto out;
swarn.extent_item_size = found_key.offset;
eb = path->nodes[0];
ei = btrfs_item_ptr(eb, path->slots[0], struct btrfs_extent_item);
item_size = btrfs_item_size(eb, path->slots[0]);
if (flags & BTRFS_EXTENT_FLAG_TREE_BLOCK) {
2023-05-11 08:01:44 +00:00
unsigned long ptr = 0;
u8 ref_level;
u64 ref_root;
while (true) {
ret = tree_backref_for_extent(&ptr, eb, &found_key, ei,
item_size, &ref_root,
&ref_level);
2023-05-11 08:01:44 +00:00
if (ret < 0) {
btrfs_warn(fs_info,
"failed to resolve tree backref for logical %llu: %d",
swarn.logical, ret);
break;
}
if (ret > 0)
break;
btrfs_warn_in_rcu(fs_info,
"%s at logical %llu on dev %s, physical %llu: metadata %s (level %d) in tree %llu",
2023-05-11 08:01:44 +00:00
errstr, swarn.logical, btrfs_dev_name(dev),
swarn.physical, (ref_level ? "node" : "leaf"),
ref_level, ref_root);
}
btrfs_release_path(path);
} else {
struct btrfs_backref_walk_ctx ctx = { 0 };
btrfs_release_path(path);
ctx.bytenr = found_key.objectid;
ctx.extent_item_pos = swarn.logical - found_key.objectid;
ctx.fs_info = fs_info;
swarn.path = path;
swarn.dev = dev;
iterate_extent_inodes(&ctx, true, scrub_print_warning_inode, &swarn);
}
out:
btrfs_free_path(path);
}
static int fill_writer_pointer_gap(struct scrub_ctx *sctx, u64 physical)
{
int ret = 0;
u64 length;
if (!btrfs_is_zoned(sctx->fs_info))
return 0;
if (!btrfs_dev_is_sequential(sctx->wr_tgtdev, physical))
return 0;
if (sctx->write_pointer < physical) {
length = physical - sctx->write_pointer;
ret = btrfs_zoned_issue_zeroout(sctx->wr_tgtdev,
sctx->write_pointer, length);
if (!ret)
sctx->write_pointer = physical;
}
return ret;
}
static struct page *scrub_stripe_get_page(struct scrub_stripe *stripe, int sector_nr)
{
struct btrfs_fs_info *fs_info = stripe->bg->fs_info;
int page_index = (sector_nr << fs_info->sectorsize_bits) >> PAGE_SHIFT;
return stripe->pages[page_index];
}
static unsigned int scrub_stripe_get_page_offset(struct scrub_stripe *stripe,
int sector_nr)
{
struct btrfs_fs_info *fs_info = stripe->bg->fs_info;
return offset_in_page(sector_nr << fs_info->sectorsize_bits);
}
static void scrub_verify_one_metadata(struct scrub_stripe *stripe, int sector_nr)
{
struct btrfs_fs_info *fs_info = stripe->bg->fs_info;
const u32 sectors_per_tree = fs_info->nodesize >> fs_info->sectorsize_bits;
const u64 logical = stripe->logical + (sector_nr << fs_info->sectorsize_bits);
const struct page *first_page = scrub_stripe_get_page(stripe, sector_nr);
const unsigned int first_off = scrub_stripe_get_page_offset(stripe, sector_nr);
SHASH_DESC_ON_STACK(shash, fs_info->csum_shash);
u8 on_disk_csum[BTRFS_CSUM_SIZE];
u8 calculated_csum[BTRFS_CSUM_SIZE];
struct btrfs_header *header;
/*
* Here we don't have a good way to attach the pages (and subpages)
* to a dummy extent buffer, thus we have to directly grab the members
* from pages.
*/
header = (struct btrfs_header *)(page_address(first_page) + first_off);
memcpy(on_disk_csum, header->csum, fs_info->csum_size);
if (logical != btrfs_stack_header_bytenr(header)) {
bitmap_set(&stripe->csum_error_bitmap, sector_nr, sectors_per_tree);
bitmap_set(&stripe->error_bitmap, sector_nr, sectors_per_tree);
btrfs_warn_rl(fs_info,
"tree block %llu mirror %u has bad bytenr, has %llu want %llu",
logical, stripe->mirror_num,
btrfs_stack_header_bytenr(header), logical);
return;
}
if (memcmp(header->fsid, fs_info->fs_devices->metadata_uuid,
BTRFS_FSID_SIZE) != 0) {
bitmap_set(&stripe->meta_error_bitmap, sector_nr, sectors_per_tree);
bitmap_set(&stripe->error_bitmap, sector_nr, sectors_per_tree);
btrfs_warn_rl(fs_info,
"tree block %llu mirror %u has bad fsid, has %pU want %pU",
logical, stripe->mirror_num,
header->fsid, fs_info->fs_devices->fsid);
return;
}
if (memcmp(header->chunk_tree_uuid, fs_info->chunk_tree_uuid,
BTRFS_UUID_SIZE) != 0) {
bitmap_set(&stripe->meta_error_bitmap, sector_nr, sectors_per_tree);
bitmap_set(&stripe->error_bitmap, sector_nr, sectors_per_tree);
btrfs_warn_rl(fs_info,
"tree block %llu mirror %u has bad chunk tree uuid, has %pU want %pU",
logical, stripe->mirror_num,
header->chunk_tree_uuid, fs_info->chunk_tree_uuid);
return;
}
/* Now check tree block csum. */
shash->tfm = fs_info->csum_shash;
crypto_shash_init(shash);
crypto_shash_update(shash, page_address(first_page) + first_off +
BTRFS_CSUM_SIZE, fs_info->sectorsize - BTRFS_CSUM_SIZE);
for (int i = sector_nr + 1; i < sector_nr + sectors_per_tree; i++) {
struct page *page = scrub_stripe_get_page(stripe, i);
unsigned int page_off = scrub_stripe_get_page_offset(stripe, i);
crypto_shash_update(shash, page_address(page) + page_off,
fs_info->sectorsize);
}
crypto_shash_final(shash, calculated_csum);
if (memcmp(calculated_csum, on_disk_csum, fs_info->csum_size) != 0) {
bitmap_set(&stripe->meta_error_bitmap, sector_nr, sectors_per_tree);
bitmap_set(&stripe->error_bitmap, sector_nr, sectors_per_tree);
btrfs_warn_rl(fs_info,
"tree block %llu mirror %u has bad csum, has " CSUM_FMT " want " CSUM_FMT,
logical, stripe->mirror_num,
CSUM_FMT_VALUE(fs_info->csum_size, on_disk_csum),
CSUM_FMT_VALUE(fs_info->csum_size, calculated_csum));
return;
}
if (stripe->sectors[sector_nr].generation !=
btrfs_stack_header_generation(header)) {
bitmap_set(&stripe->meta_error_bitmap, sector_nr, sectors_per_tree);
bitmap_set(&stripe->error_bitmap, sector_nr, sectors_per_tree);
btrfs_warn_rl(fs_info,
"tree block %llu mirror %u has bad generation, has %llu want %llu",
logical, stripe->mirror_num,
btrfs_stack_header_generation(header),
stripe->sectors[sector_nr].generation);
return;
}
bitmap_clear(&stripe->error_bitmap, sector_nr, sectors_per_tree);
bitmap_clear(&stripe->csum_error_bitmap, sector_nr, sectors_per_tree);
bitmap_clear(&stripe->meta_error_bitmap, sector_nr, sectors_per_tree);
}
static void scrub_verify_one_sector(struct scrub_stripe *stripe, int sector_nr)
{
struct btrfs_fs_info *fs_info = stripe->bg->fs_info;
struct scrub_sector_verification *sector = &stripe->sectors[sector_nr];
const u32 sectors_per_tree = fs_info->nodesize >> fs_info->sectorsize_bits;
struct page *page = scrub_stripe_get_page(stripe, sector_nr);
unsigned int pgoff = scrub_stripe_get_page_offset(stripe, sector_nr);
u8 csum_buf[BTRFS_CSUM_SIZE];
int ret;
ASSERT(sector_nr >= 0 && sector_nr < stripe->nr_sectors);
/* Sector not utilized, skip it. */
if (!test_bit(sector_nr, &stripe->extent_sector_bitmap))
return;
/* IO error, no need to check. */
if (test_bit(sector_nr, &stripe->io_error_bitmap))
return;
/* Metadata, verify the full tree block. */
if (sector->is_metadata) {
/*
* Check if the tree block crosses the stripe boudary. If
* crossed the boundary, we cannot verify it but only give a
* warning.
*
* This can only happen on a very old filesystem where chunks
* are not ensured to be stripe aligned.
*/
if (unlikely(sector_nr + sectors_per_tree > stripe->nr_sectors)) {
btrfs_warn_rl(fs_info,
"tree block at %llu crosses stripe boundary %llu",
stripe->logical +
(sector_nr << fs_info->sectorsize_bits),
stripe->logical);
return;
}
scrub_verify_one_metadata(stripe, sector_nr);
return;
}
/*
* Data is easier, we just verify the data csum (if we have it). For
* cases without csum, we have no other choice but to trust it.
*/
if (!sector->csum) {
clear_bit(sector_nr, &stripe->error_bitmap);
return;
}
ret = btrfs_check_sector_csum(fs_info, page, pgoff, csum_buf, sector->csum);
if (ret < 0) {
set_bit(sector_nr, &stripe->csum_error_bitmap);
set_bit(sector_nr, &stripe->error_bitmap);
} else {
clear_bit(sector_nr, &stripe->csum_error_bitmap);
clear_bit(sector_nr, &stripe->error_bitmap);
}
}
/* Verify specified sectors of a stripe. */
static void scrub_verify_one_stripe(struct scrub_stripe *stripe, unsigned long bitmap)
{
struct btrfs_fs_info *fs_info = stripe->bg->fs_info;
const u32 sectors_per_tree = fs_info->nodesize >> fs_info->sectorsize_bits;
int sector_nr;
for_each_set_bit(sector_nr, &bitmap, stripe->nr_sectors) {
scrub_verify_one_sector(stripe, sector_nr);
if (stripe->sectors[sector_nr].is_metadata)
sector_nr += sectors_per_tree - 1;
}
}
static int calc_sector_number(struct scrub_stripe *stripe, struct bio_vec *first_bvec)
{
int i;
for (i = 0; i < stripe->nr_sectors; i++) {
if (scrub_stripe_get_page(stripe, i) == first_bvec->bv_page &&
scrub_stripe_get_page_offset(stripe, i) == first_bvec->bv_offset)
break;
}
ASSERT(i < stripe->nr_sectors);
return i;
}
/*
* Repair read is different to the regular read:
*
* - Only reads the failed sectors
* - May have extra blocksize limits
*/
static void scrub_repair_read_endio(struct btrfs_bio *bbio)
{
struct scrub_stripe *stripe = bbio->private;
struct btrfs_fs_info *fs_info = stripe->bg->fs_info;
struct bio_vec *bvec;
int sector_nr = calc_sector_number(stripe, bio_first_bvec_all(&bbio->bio));
u32 bio_size = 0;
int i;
ASSERT(sector_nr < stripe->nr_sectors);
bio_for_each_bvec_all(bvec, &bbio->bio, i)
bio_size += bvec->bv_len;
if (bbio->bio.bi_status) {
bitmap_set(&stripe->io_error_bitmap, sector_nr,
bio_size >> fs_info->sectorsize_bits);
bitmap_set(&stripe->error_bitmap, sector_nr,
bio_size >> fs_info->sectorsize_bits);
} else {
bitmap_clear(&stripe->io_error_bitmap, sector_nr,
bio_size >> fs_info->sectorsize_bits);
}
bio_put(&bbio->bio);
if (atomic_dec_and_test(&stripe->pending_io))
wake_up(&stripe->io_wait);
}
static int calc_next_mirror(int mirror, int num_copies)
{
ASSERT(mirror <= num_copies);
return (mirror + 1 > num_copies) ? 1 : mirror + 1;
}
static void scrub_stripe_submit_repair_read(struct scrub_stripe *stripe,
int mirror, int blocksize, bool wait)
{
struct btrfs_fs_info *fs_info = stripe->bg->fs_info;
struct btrfs_bio *bbio = NULL;
const unsigned long old_error_bitmap = stripe->error_bitmap;
int i;
ASSERT(stripe->mirror_num >= 1);
ASSERT(atomic_read(&stripe->pending_io) == 0);
for_each_set_bit(i, &old_error_bitmap, stripe->nr_sectors) {
struct page *page;
int pgoff;
int ret;
page = scrub_stripe_get_page(stripe, i);
pgoff = scrub_stripe_get_page_offset(stripe, i);
/* The current sector cannot be merged, submit the bio. */
if (bbio && ((i > 0 && !test_bit(i - 1, &stripe->error_bitmap)) ||
bbio->bio.bi_iter.bi_size >= blocksize)) {
ASSERT(bbio->bio.bi_iter.bi_size);
atomic_inc(&stripe->pending_io);
btrfs_submit_bio(bbio, mirror);
if (wait)
wait_scrub_stripe_io(stripe);
bbio = NULL;
}
if (!bbio) {
bbio = btrfs_bio_alloc(stripe->nr_sectors, REQ_OP_READ,
fs_info, scrub_repair_read_endio, stripe);
bbio->bio.bi_iter.bi_sector = (stripe->logical +
(i << fs_info->sectorsize_bits)) >> SECTOR_SHIFT;
}
ret = bio_add_page(&bbio->bio, page, fs_info->sectorsize, pgoff);
ASSERT(ret == fs_info->sectorsize);
}
if (bbio) {
ASSERT(bbio->bio.bi_iter.bi_size);
atomic_inc(&stripe->pending_io);
btrfs_submit_bio(bbio, mirror);
if (wait)
wait_scrub_stripe_io(stripe);
}
}
static void scrub_stripe_report_errors(struct scrub_ctx *sctx,
struct scrub_stripe *stripe)
{
static DEFINE_RATELIMIT_STATE(rs, DEFAULT_RATELIMIT_INTERVAL,
DEFAULT_RATELIMIT_BURST);
struct btrfs_fs_info *fs_info = sctx->fs_info;
struct btrfs_device *dev = NULL;
u64 physical = 0;
int nr_data_sectors = 0;
int nr_meta_sectors = 0;
int nr_nodatacsum_sectors = 0;
int nr_repaired_sectors = 0;
int sector_nr;
if (test_bit(SCRUB_STRIPE_FLAG_NO_REPORT, &stripe->state))
return;
/*
* Init needed infos for error reporting.
*
* Although our scrub_stripe infrastucture is mostly based on btrfs_submit_bio()
* thus no need for dev/physical, error reporting still needs dev and physical.
*/
if (!bitmap_empty(&stripe->init_error_bitmap, stripe->nr_sectors)) {
u64 mapped_len = fs_info->sectorsize;
struct btrfs_io_context *bioc = NULL;
int stripe_index = stripe->mirror_num - 1;
int ret;
/* For scrub, our mirror_num should always start at 1. */
ASSERT(stripe->mirror_num >= 1);
ret = btrfs_map_block(fs_info, BTRFS_MAP_GET_READ_MIRRORS,
stripe->logical, &mapped_len, &bioc,
NULL, NULL);
/*
* If we failed, dev will be NULL, and later detailed reports
* will just be skipped.
*/
if (ret < 0)
goto skip;
physical = bioc->stripes[stripe_index].physical;
dev = bioc->stripes[stripe_index].dev;
btrfs_put_bioc(bioc);
}
skip:
for_each_set_bit(sector_nr, &stripe->extent_sector_bitmap, stripe->nr_sectors) {
bool repaired = false;
if (stripe->sectors[sector_nr].is_metadata) {
nr_meta_sectors++;
} else {
nr_data_sectors++;
if (!stripe->sectors[sector_nr].csum)
nr_nodatacsum_sectors++;
}
if (test_bit(sector_nr, &stripe->init_error_bitmap) &&
!test_bit(sector_nr, &stripe->error_bitmap)) {
nr_repaired_sectors++;
repaired = true;
}
/* Good sector from the beginning, nothing need to be done. */
if (!test_bit(sector_nr, &stripe->init_error_bitmap))
continue;
/*
* Report error for the corrupted sectors. If repaired, just
* output the message of repaired message.
*/
if (repaired) {
if (dev) {
btrfs_err_rl_in_rcu(fs_info,
"fixed up error at logical %llu on dev %s physical %llu",
stripe->logical, btrfs_dev_name(dev),
physical);
} else {
btrfs_err_rl_in_rcu(fs_info,
"fixed up error at logical %llu on mirror %u",
stripe->logical, stripe->mirror_num);
}
continue;
}
/* The remaining are all for unrepaired. */
if (dev) {
btrfs_err_rl_in_rcu(fs_info,
"unable to fixup (regular) error at logical %llu on dev %s physical %llu",
stripe->logical, btrfs_dev_name(dev),
physical);
} else {
btrfs_err_rl_in_rcu(fs_info,
"unable to fixup (regular) error at logical %llu on mirror %u",
stripe->logical, stripe->mirror_num);
}
if (test_bit(sector_nr, &stripe->io_error_bitmap))
if (__ratelimit(&rs) && dev)
scrub_print_common_warning("i/o error", dev, false,
stripe->logical, physical);
if (test_bit(sector_nr, &stripe->csum_error_bitmap))
if (__ratelimit(&rs) && dev)
scrub_print_common_warning("checksum error", dev, false,
stripe->logical, physical);
if (test_bit(sector_nr, &stripe->meta_error_bitmap))
if (__ratelimit(&rs) && dev)
scrub_print_common_warning("header error", dev, false,
stripe->logical, physical);
}
spin_lock(&sctx->stat_lock);
sctx->stat.data_extents_scrubbed += stripe->nr_data_extents;
sctx->stat.tree_extents_scrubbed += stripe->nr_meta_extents;
sctx->stat.data_bytes_scrubbed += nr_data_sectors << fs_info->sectorsize_bits;
sctx->stat.tree_bytes_scrubbed += nr_meta_sectors << fs_info->sectorsize_bits;
sctx->stat.no_csum += nr_nodatacsum_sectors;
btrfs: scrub: also report errors hit during the initial read [BUG] After the recent scrub rework introduced in commit e02ee89baa66 ("btrfs: scrub: switch scrub_simple_mirror() to scrub_stripe infrastructure"), btrfs scrub no longer reports repaired errors any more: # mkfs.btrfs -f $dev -d DUP # mount $dev $mnt # xfs_io -f -d -c "pwrite -b 64K -S 0xaa 0 64" $mnt/file # umount $dev # xfs_io -f -c "pwrite -S 0xff $phy1 64K" $dev # Corrupt the first mirror # mount $dev $mnt # btrfs scrub start -BR $mnt scrub done for 725e7cb7-8a4a-4c77-9f2a-86943619e218 Scrub started: Tue Jun 6 14:56:50 2023 Status: finished Duration: 0:00:00 data_extents_scrubbed: 2 tree_extents_scrubbed: 18 data_bytes_scrubbed: 131072 tree_bytes_scrubbed: 294912 read_errors: 0 csum_errors: 0 <<< No errors here verify_errors: 0 [...] uncorrectable_errors: 0 unverified_errors: 0 corrected_errors: 16 <<< Only corrected errors last_physical: 2723151872 This can confuse btrfs-progs, as it relies on the csum_errors to determine if there is anything wrong. While on v6.3.x kernels, the report is different: csum_errors: 16 <<< verify_errors: 0 [...] uncorrectable_errors: 0 unverified_errors: 0 corrected_errors: 16 <<< [CAUSE] In the reworked scrub, we update the scrub progress inside scrub_stripe_report_errors(), using various bitmaps to update the result. For example for csum_errors, we use bitmap_weight() of stripe->csum_error_bitmap. Unfortunately at that stage, all error bitmaps (except init_error_bitmap) are the result of the latest repair attempt, thus if the stripe is fully repaired, those error bitmaps will all be empty, resulting the above output mismatch. To fix this, record the number of errors into stripe->init_nr_*_errors. Since we don't really care about where those errors are, we only need to record the number of errors. Then in scrub_stripe_report_errors(), use those initial numbers to update the progress other than using the latest error bitmaps. Fixes: e02ee89baa66 ("btrfs: scrub: switch scrub_simple_mirror() to scrub_stripe infrastructure") Signed-off-by: Qu Wenruo <wqu@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2023-06-06 07:08:28 +00:00
sctx->stat.read_errors += stripe->init_nr_io_errors;
sctx->stat.csum_errors += stripe->init_nr_csum_errors;
sctx->stat.verify_errors += stripe->init_nr_meta_errors;
sctx->stat.uncorrectable_errors +=
bitmap_weight(&stripe->error_bitmap, stripe->nr_sectors);
sctx->stat.corrected_errors += nr_repaired_sectors;
spin_unlock(&sctx->stat_lock);
}
static void scrub_write_sectors(struct scrub_ctx *sctx, struct scrub_stripe *stripe,
unsigned long write_bitmap, bool dev_replace);
/*
* The main entrance for all read related scrub work, including:
*
* - Wait for the initial read to finish
* - Verify and locate any bad sectors
* - Go through the remaining mirrors and try to read as large blocksize as
* possible
* - Go through all mirrors (including the failed mirror) sector-by-sector
* - Submit writeback for repaired sectors
*
* Writeback for dev-replace does not happen here, it needs extra
* synchronization for zoned devices.
*/
static void scrub_stripe_read_repair_worker(struct work_struct *work)
{
struct scrub_stripe *stripe = container_of(work, struct scrub_stripe, work);
struct scrub_ctx *sctx = stripe->sctx;
struct btrfs_fs_info *fs_info = sctx->fs_info;
int num_copies = btrfs_num_copies(fs_info, stripe->bg->start,
stripe->bg->length);
int mirror;
int i;
ASSERT(stripe->mirror_num > 0);
wait_scrub_stripe_io(stripe);
scrub_verify_one_stripe(stripe, stripe->extent_sector_bitmap);
/* Save the initial failed bitmap for later repair and report usage. */
stripe->init_error_bitmap = stripe->error_bitmap;
btrfs: scrub: also report errors hit during the initial read [BUG] After the recent scrub rework introduced in commit e02ee89baa66 ("btrfs: scrub: switch scrub_simple_mirror() to scrub_stripe infrastructure"), btrfs scrub no longer reports repaired errors any more: # mkfs.btrfs -f $dev -d DUP # mount $dev $mnt # xfs_io -f -d -c "pwrite -b 64K -S 0xaa 0 64" $mnt/file # umount $dev # xfs_io -f -c "pwrite -S 0xff $phy1 64K" $dev # Corrupt the first mirror # mount $dev $mnt # btrfs scrub start -BR $mnt scrub done for 725e7cb7-8a4a-4c77-9f2a-86943619e218 Scrub started: Tue Jun 6 14:56:50 2023 Status: finished Duration: 0:00:00 data_extents_scrubbed: 2 tree_extents_scrubbed: 18 data_bytes_scrubbed: 131072 tree_bytes_scrubbed: 294912 read_errors: 0 csum_errors: 0 <<< No errors here verify_errors: 0 [...] uncorrectable_errors: 0 unverified_errors: 0 corrected_errors: 16 <<< Only corrected errors last_physical: 2723151872 This can confuse btrfs-progs, as it relies on the csum_errors to determine if there is anything wrong. While on v6.3.x kernels, the report is different: csum_errors: 16 <<< verify_errors: 0 [...] uncorrectable_errors: 0 unverified_errors: 0 corrected_errors: 16 <<< [CAUSE] In the reworked scrub, we update the scrub progress inside scrub_stripe_report_errors(), using various bitmaps to update the result. For example for csum_errors, we use bitmap_weight() of stripe->csum_error_bitmap. Unfortunately at that stage, all error bitmaps (except init_error_bitmap) are the result of the latest repair attempt, thus if the stripe is fully repaired, those error bitmaps will all be empty, resulting the above output mismatch. To fix this, record the number of errors into stripe->init_nr_*_errors. Since we don't really care about where those errors are, we only need to record the number of errors. Then in scrub_stripe_report_errors(), use those initial numbers to update the progress other than using the latest error bitmaps. Fixes: e02ee89baa66 ("btrfs: scrub: switch scrub_simple_mirror() to scrub_stripe infrastructure") Signed-off-by: Qu Wenruo <wqu@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2023-06-06 07:08:28 +00:00
stripe->init_nr_io_errors = bitmap_weight(&stripe->io_error_bitmap,
stripe->nr_sectors);
stripe->init_nr_csum_errors = bitmap_weight(&stripe->csum_error_bitmap,
stripe->nr_sectors);
stripe->init_nr_meta_errors = bitmap_weight(&stripe->meta_error_bitmap,
stripe->nr_sectors);
if (bitmap_empty(&stripe->init_error_bitmap, stripe->nr_sectors))
goto out;
/*
* Try all remaining mirrors.
*
* Here we still try to read as large block as possible, as this is
* faster and we have extra safety nets to rely on.
*/
for (mirror = calc_next_mirror(stripe->mirror_num, num_copies);
mirror != stripe->mirror_num;
mirror = calc_next_mirror(mirror, num_copies)) {
const unsigned long old_error_bitmap = stripe->error_bitmap;
scrub_stripe_submit_repair_read(stripe, mirror,
BTRFS_STRIPE_LEN, false);
wait_scrub_stripe_io(stripe);
scrub_verify_one_stripe(stripe, old_error_bitmap);
if (bitmap_empty(&stripe->error_bitmap, stripe->nr_sectors))
goto out;
}
/*
* Last safety net, try re-checking all mirrors, including the failed
* one, sector-by-sector.
*
* As if one sector failed the drive's internal csum, the whole read
* containing the offending sector would be marked as error.
* Thus here we do sector-by-sector read.
*
* This can be slow, thus we only try it as the last resort.
*/
for (i = 0, mirror = stripe->mirror_num;
i < num_copies;
i++, mirror = calc_next_mirror(mirror, num_copies)) {
const unsigned long old_error_bitmap = stripe->error_bitmap;
scrub_stripe_submit_repair_read(stripe, mirror,
fs_info->sectorsize, true);
wait_scrub_stripe_io(stripe);
scrub_verify_one_stripe(stripe, old_error_bitmap);
if (bitmap_empty(&stripe->error_bitmap, stripe->nr_sectors))
goto out;
}
out:
/*
* Submit the repaired sectors. For zoned case, we cannot do repair
* in-place, but queue the bg to be relocated.
*/
if (btrfs_is_zoned(fs_info)) {
if (!bitmap_empty(&stripe->error_bitmap, stripe->nr_sectors))
btrfs_repair_one_zone(fs_info, sctx->stripes[0].bg->start);
} else if (!sctx->readonly) {
unsigned long repaired;
bitmap_andnot(&repaired, &stripe->init_error_bitmap,
&stripe->error_bitmap, stripe->nr_sectors);
scrub_write_sectors(sctx, stripe, repaired, false);
wait_scrub_stripe_io(stripe);
}
scrub_stripe_report_errors(sctx, stripe);
set_bit(SCRUB_STRIPE_FLAG_REPAIR_DONE, &stripe->state);
wake_up(&stripe->repair_wait);
}
static void scrub_read_endio(struct btrfs_bio *bbio)
{
struct scrub_stripe *stripe = bbio->private;
if (bbio->bio.bi_status) {
bitmap_set(&stripe->io_error_bitmap, 0, stripe->nr_sectors);
bitmap_set(&stripe->error_bitmap, 0, stripe->nr_sectors);
} else {
bitmap_clear(&stripe->io_error_bitmap, 0, stripe->nr_sectors);
}
bio_put(&bbio->bio);
if (atomic_dec_and_test(&stripe->pending_io)) {
wake_up(&stripe->io_wait);
INIT_WORK(&stripe->work, scrub_stripe_read_repair_worker);
queue_work(stripe->bg->fs_info->scrub_workers, &stripe->work);
}
}
static void scrub_write_endio(struct btrfs_bio *bbio)
{
struct scrub_stripe *stripe = bbio->private;
struct btrfs_fs_info *fs_info = stripe->bg->fs_info;
struct bio_vec *bvec;
int sector_nr = calc_sector_number(stripe, bio_first_bvec_all(&bbio->bio));
u32 bio_size = 0;
int i;
bio_for_each_bvec_all(bvec, &bbio->bio, i)
bio_size += bvec->bv_len;
if (bbio->bio.bi_status) {
unsigned long flags;
spin_lock_irqsave(&stripe->write_error_lock, flags);
bitmap_set(&stripe->write_error_bitmap, sector_nr,
bio_size >> fs_info->sectorsize_bits);
spin_unlock_irqrestore(&stripe->write_error_lock, flags);
}
bio_put(&bbio->bio);
if (atomic_dec_and_test(&stripe->pending_io))
wake_up(&stripe->io_wait);
}
btrfs: zoned: fix dev-replace after the scrub rework [BUG] After commit e02ee89baa66 ("btrfs: scrub: switch scrub_simple_mirror() to scrub_stripe infrastructure"), scrub no longer works for zoned device at all. Even an empty zoned btrfs cannot be replaced: # mkfs.btrfs -f /dev/nvme0n1 # mount /dev/nvme0n1 /mnt/btrfs # btrfs replace start -Bf 1 /dev/nvme0n2 /mnt/btrfs Resetting device zones /dev/nvme1n1 (160 zones) ... ERROR: ioctl(DEV_REPLACE_START) failed on "/mnt/btrfs/": Input/output error And we can hit kernel crash related to that: BTRFS info (device nvme1n1): host-managed zoned block device /dev/nvme3n1, 160 zones of 134217728 bytes BTRFS info (device nvme1n1): dev_replace from /dev/nvme2n1 (devid 2) to /dev/nvme3n1 started nvme3n1: Zone Management Append(0x7d) @ LBA 65536, 4 blocks, Zone Is Full (sct 0x1 / sc 0xb9) DNR I/O error, dev nvme3n1, sector 786432 op 0xd:(ZONE_APPEND) flags 0x4000 phys_seg 3 prio class 2 BTRFS error (device nvme1n1): bdev /dev/nvme3n1 errs: wr 1, rd 0, flush 0, corrupt 0, gen 0 BUG: kernel NULL pointer dereference, address: 00000000000000a8 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 RIP: 0010:_raw_spin_lock_irqsave+0x1e/0x40 Call Trace: <IRQ> btrfs_lookup_ordered_extent+0x31/0x190 btrfs_record_physical_zoned+0x18/0x40 btrfs_simple_end_io+0xaf/0xc0 blk_update_request+0x153/0x4c0 blk_mq_end_request+0x15/0xd0 nvme_poll_cq+0x1d3/0x360 nvme_irq+0x39/0x80 __handle_irq_event_percpu+0x3b/0x190 handle_irq_event+0x2f/0x70 handle_edge_irq+0x7c/0x210 __common_interrupt+0x34/0xa0 common_interrupt+0x7d/0xa0 </IRQ> <TASK> asm_common_interrupt+0x22/0x40 [CAUSE] Dev-replace reuses scrub code to iterate all extents and write the existing content back to the new device. And for zoned devices, we call fill_writer_pointer_gap() to make sure all the writes into the zoned device is sequential, even if there may be some gaps between the writes. However we have several different bugs all related to zoned dev-replace: - We are using ZONE_APPEND operation for metadata style write back For zoned devices, btrfs has two ways to write data: * ZONE_APPEND for data This allows higher queue depth, but will not be able to know where the write would land. Thus needs to grab the real on-disk physical location in it's endio. * WRITE for metadata This requires single queue depth (new writes can only be submitted after previous one finished), and all writes must be sequential. For scrub, we go single queue depth, but still goes with ZONE_APPEND, which requires btrfs_bio::inode being populated. This is the cause of that crash. - No correct tracing of write_pointer After a write finished, we should forward sctx->write_pointer, or fill_writer_pointer_gap() would not work properly and cause more than necessary zero out, and fill the whole zone prematurely. - Incorrect physical bytenr passed to fill_writer_pointer_gap() In scrub_write_sectors(), one call site passes logical address, which is completely wrong. The other call site passes physical address of current sector, but we should pass the physical address of the btrfs_bio we're submitting. This is the cause of the -EIO errors. [FIX] - Do not use ZONE_APPEND for btrfs_submit_repair_write(). - Manually forward sctx->write_pointer after successful writeback - Use the physical address of the to-be-submitted btrfs_bio for fill_writer_pointer_gap() Now zoned device replace would work as expected. Reported-by: Christoph Hellwig <hch@lst.de> Fixes: e02ee89baa66 ("btrfs: scrub: switch scrub_simple_mirror() to scrub_stripe infrastructure") Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Qu Wenruo <wqu@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2023-06-01 10:51:34 +00:00
static void scrub_submit_write_bio(struct scrub_ctx *sctx,
struct scrub_stripe *stripe,
struct btrfs_bio *bbio, bool dev_replace)
{
struct btrfs_fs_info *fs_info = sctx->fs_info;
u32 bio_len = bbio->bio.bi_iter.bi_size;
u32 bio_off = (bbio->bio.bi_iter.bi_sector << SECTOR_SHIFT) -
stripe->logical;
fill_writer_pointer_gap(sctx, stripe->physical + bio_off);
atomic_inc(&stripe->pending_io);
btrfs_submit_repair_write(bbio, stripe->mirror_num, dev_replace);
if (!btrfs_is_zoned(fs_info))
return;
/*
* For zoned writeback, queue depth must be 1, thus we must wait for
* the write to finish before the next write.
*/
wait_scrub_stripe_io(stripe);
/*
* And also need to update the write pointer if write finished
* successfully.
*/
if (!test_bit(bio_off >> fs_info->sectorsize_bits,
&stripe->write_error_bitmap))
sctx->write_pointer += bio_len;
}
/*
* Submit the write bio(s) for the sectors specified by @write_bitmap.
*
* Here we utilize btrfs_submit_repair_write(), which has some extra benefits:
*
* - Only needs logical bytenr and mirror_num
* Just like the scrub read path
*
* - Would only result in writes to the specified mirror
* Unlike the regular writeback path, which would write back to all stripes
*
* - Handle dev-replace and read-repair writeback differently
*/
static void scrub_write_sectors(struct scrub_ctx *sctx, struct scrub_stripe *stripe,
unsigned long write_bitmap, bool dev_replace)
{
struct btrfs_fs_info *fs_info = stripe->bg->fs_info;
struct btrfs_bio *bbio = NULL;
int sector_nr;
for_each_set_bit(sector_nr, &write_bitmap, stripe->nr_sectors) {
struct page *page = scrub_stripe_get_page(stripe, sector_nr);
unsigned int pgoff = scrub_stripe_get_page_offset(stripe, sector_nr);
int ret;
/* We should only writeback sectors covered by an extent. */
ASSERT(test_bit(sector_nr, &stripe->extent_sector_bitmap));
/* Cannot merge with previous sector, submit the current one. */
if (bbio && sector_nr && !test_bit(sector_nr - 1, &write_bitmap)) {
btrfs: zoned: fix dev-replace after the scrub rework [BUG] After commit e02ee89baa66 ("btrfs: scrub: switch scrub_simple_mirror() to scrub_stripe infrastructure"), scrub no longer works for zoned device at all. Even an empty zoned btrfs cannot be replaced: # mkfs.btrfs -f /dev/nvme0n1 # mount /dev/nvme0n1 /mnt/btrfs # btrfs replace start -Bf 1 /dev/nvme0n2 /mnt/btrfs Resetting device zones /dev/nvme1n1 (160 zones) ... ERROR: ioctl(DEV_REPLACE_START) failed on "/mnt/btrfs/": Input/output error And we can hit kernel crash related to that: BTRFS info (device nvme1n1): host-managed zoned block device /dev/nvme3n1, 160 zones of 134217728 bytes BTRFS info (device nvme1n1): dev_replace from /dev/nvme2n1 (devid 2) to /dev/nvme3n1 started nvme3n1: Zone Management Append(0x7d) @ LBA 65536, 4 blocks, Zone Is Full (sct 0x1 / sc 0xb9) DNR I/O error, dev nvme3n1, sector 786432 op 0xd:(ZONE_APPEND) flags 0x4000 phys_seg 3 prio class 2 BTRFS error (device nvme1n1): bdev /dev/nvme3n1 errs: wr 1, rd 0, flush 0, corrupt 0, gen 0 BUG: kernel NULL pointer dereference, address: 00000000000000a8 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 RIP: 0010:_raw_spin_lock_irqsave+0x1e/0x40 Call Trace: <IRQ> btrfs_lookup_ordered_extent+0x31/0x190 btrfs_record_physical_zoned+0x18/0x40 btrfs_simple_end_io+0xaf/0xc0 blk_update_request+0x153/0x4c0 blk_mq_end_request+0x15/0xd0 nvme_poll_cq+0x1d3/0x360 nvme_irq+0x39/0x80 __handle_irq_event_percpu+0x3b/0x190 handle_irq_event+0x2f/0x70 handle_edge_irq+0x7c/0x210 __common_interrupt+0x34/0xa0 common_interrupt+0x7d/0xa0 </IRQ> <TASK> asm_common_interrupt+0x22/0x40 [CAUSE] Dev-replace reuses scrub code to iterate all extents and write the existing content back to the new device. And for zoned devices, we call fill_writer_pointer_gap() to make sure all the writes into the zoned device is sequential, even if there may be some gaps between the writes. However we have several different bugs all related to zoned dev-replace: - We are using ZONE_APPEND operation for metadata style write back For zoned devices, btrfs has two ways to write data: * ZONE_APPEND for data This allows higher queue depth, but will not be able to know where the write would land. Thus needs to grab the real on-disk physical location in it's endio. * WRITE for metadata This requires single queue depth (new writes can only be submitted after previous one finished), and all writes must be sequential. For scrub, we go single queue depth, but still goes with ZONE_APPEND, which requires btrfs_bio::inode being populated. This is the cause of that crash. - No correct tracing of write_pointer After a write finished, we should forward sctx->write_pointer, or fill_writer_pointer_gap() would not work properly and cause more than necessary zero out, and fill the whole zone prematurely. - Incorrect physical bytenr passed to fill_writer_pointer_gap() In scrub_write_sectors(), one call site passes logical address, which is completely wrong. The other call site passes physical address of current sector, but we should pass the physical address of the btrfs_bio we're submitting. This is the cause of the -EIO errors. [FIX] - Do not use ZONE_APPEND for btrfs_submit_repair_write(). - Manually forward sctx->write_pointer after successful writeback - Use the physical address of the to-be-submitted btrfs_bio for fill_writer_pointer_gap() Now zoned device replace would work as expected. Reported-by: Christoph Hellwig <hch@lst.de> Fixes: e02ee89baa66 ("btrfs: scrub: switch scrub_simple_mirror() to scrub_stripe infrastructure") Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Qu Wenruo <wqu@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2023-06-01 10:51:34 +00:00
scrub_submit_write_bio(sctx, stripe, bbio, dev_replace);
bbio = NULL;
}
if (!bbio) {
bbio = btrfs_bio_alloc(stripe->nr_sectors, REQ_OP_WRITE,
fs_info, scrub_write_endio, stripe);
bbio->bio.bi_iter.bi_sector = (stripe->logical +
(sector_nr << fs_info->sectorsize_bits)) >>
SECTOR_SHIFT;
}
ret = bio_add_page(&bbio->bio, page, fs_info->sectorsize, pgoff);
ASSERT(ret == fs_info->sectorsize);
}
btrfs: zoned: fix dev-replace after the scrub rework [BUG] After commit e02ee89baa66 ("btrfs: scrub: switch scrub_simple_mirror() to scrub_stripe infrastructure"), scrub no longer works for zoned device at all. Even an empty zoned btrfs cannot be replaced: # mkfs.btrfs -f /dev/nvme0n1 # mount /dev/nvme0n1 /mnt/btrfs # btrfs replace start -Bf 1 /dev/nvme0n2 /mnt/btrfs Resetting device zones /dev/nvme1n1 (160 zones) ... ERROR: ioctl(DEV_REPLACE_START) failed on "/mnt/btrfs/": Input/output error And we can hit kernel crash related to that: BTRFS info (device nvme1n1): host-managed zoned block device /dev/nvme3n1, 160 zones of 134217728 bytes BTRFS info (device nvme1n1): dev_replace from /dev/nvme2n1 (devid 2) to /dev/nvme3n1 started nvme3n1: Zone Management Append(0x7d) @ LBA 65536, 4 blocks, Zone Is Full (sct 0x1 / sc 0xb9) DNR I/O error, dev nvme3n1, sector 786432 op 0xd:(ZONE_APPEND) flags 0x4000 phys_seg 3 prio class 2 BTRFS error (device nvme1n1): bdev /dev/nvme3n1 errs: wr 1, rd 0, flush 0, corrupt 0, gen 0 BUG: kernel NULL pointer dereference, address: 00000000000000a8 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 RIP: 0010:_raw_spin_lock_irqsave+0x1e/0x40 Call Trace: <IRQ> btrfs_lookup_ordered_extent+0x31/0x190 btrfs_record_physical_zoned+0x18/0x40 btrfs_simple_end_io+0xaf/0xc0 blk_update_request+0x153/0x4c0 blk_mq_end_request+0x15/0xd0 nvme_poll_cq+0x1d3/0x360 nvme_irq+0x39/0x80 __handle_irq_event_percpu+0x3b/0x190 handle_irq_event+0x2f/0x70 handle_edge_irq+0x7c/0x210 __common_interrupt+0x34/0xa0 common_interrupt+0x7d/0xa0 </IRQ> <TASK> asm_common_interrupt+0x22/0x40 [CAUSE] Dev-replace reuses scrub code to iterate all extents and write the existing content back to the new device. And for zoned devices, we call fill_writer_pointer_gap() to make sure all the writes into the zoned device is sequential, even if there may be some gaps between the writes. However we have several different bugs all related to zoned dev-replace: - We are using ZONE_APPEND operation for metadata style write back For zoned devices, btrfs has two ways to write data: * ZONE_APPEND for data This allows higher queue depth, but will not be able to know where the write would land. Thus needs to grab the real on-disk physical location in it's endio. * WRITE for metadata This requires single queue depth (new writes can only be submitted after previous one finished), and all writes must be sequential. For scrub, we go single queue depth, but still goes with ZONE_APPEND, which requires btrfs_bio::inode being populated. This is the cause of that crash. - No correct tracing of write_pointer After a write finished, we should forward sctx->write_pointer, or fill_writer_pointer_gap() would not work properly and cause more than necessary zero out, and fill the whole zone prematurely. - Incorrect physical bytenr passed to fill_writer_pointer_gap() In scrub_write_sectors(), one call site passes logical address, which is completely wrong. The other call site passes physical address of current sector, but we should pass the physical address of the btrfs_bio we're submitting. This is the cause of the -EIO errors. [FIX] - Do not use ZONE_APPEND for btrfs_submit_repair_write(). - Manually forward sctx->write_pointer after successful writeback - Use the physical address of the to-be-submitted btrfs_bio for fill_writer_pointer_gap() Now zoned device replace would work as expected. Reported-by: Christoph Hellwig <hch@lst.de> Fixes: e02ee89baa66 ("btrfs: scrub: switch scrub_simple_mirror() to scrub_stripe infrastructure") Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Qu Wenruo <wqu@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2023-06-01 10:51:34 +00:00
if (bbio)
scrub_submit_write_bio(sctx, stripe, bbio, dev_replace);
}
/*
* Throttling of IO submission, bandwidth-limit based, the timeslice is 1
* second. Limit can be set via /sys/fs/UUID/devinfo/devid/scrub_speed_max.
*/
static void scrub_throttle_dev_io(struct scrub_ctx *sctx, struct btrfs_device *device,
unsigned int bio_size)
btrfs: scrub: per-device bandwidth control Add sysfs interface to limit io during scrub. We relied on the ionice interface to do that, eg. the idle class let the system usable while scrub was running. This has changed when mq-deadline got widespread and did not implement the scheduling classes. That was a CFQ thing that got deleted. We've got numerous complaints from users about degraded performance. Currently only BFQ supports that but it's not a common scheduler and we can't ask everybody to switch to it. Alternatively the cgroup io limiting can be used but that also a non-trivial setup (v2 required, the controller must be enabled on the system). This can still be used if desired. Other ideas that have been explored: piggy-back on ionice (that is set per-process and is accessible) and interpret the class and classdata as bandwidth limits, but this does not have enough flexibility as there are only 8 allowed and we'd have to map fixed limits to each value. Also adjusting the value would need to lookup the process that currently runs scrub on the given device, and the value is not sticky so would have to be adjusted each time scrub runs. Running out of options, sysfs does not look that bad: - it's accessible from scripts, or udev rules - the name is similar to what MD-RAID has (/proc/sys/dev/raid/speed_limit_max or /sys/block/mdX/md/sync_speed_max) - the value is sticky at least for filesystem mount time - adjusting the value has immediate effect - sysfs is available in constrained environments (eg. system rescue) - the limit also applies to device replace Sysfs: - raw value is in bytes - values written to the file accept suffixes like K, M - file is in the per-device directory /sys/fs/btrfs/FSID/devinfo/DEVID/scrub_speed_max - 0 means use default priority of IO The scheduler is a simple deadline one and the accuracy is up to nearest 128K. Signed-off-by: David Sterba <dsterba@suse.com>
2019-10-09 11:58:13 +00:00
{
const int time_slice = 1000;
s64 delta;
ktime_t now;
u32 div;
u64 bwlimit;
bwlimit = READ_ONCE(device->scrub_speed_max);
if (bwlimit == 0)
return;
/*
* Slice is divided into intervals when the IO is submitted, adjust by
* bwlimit and maximum of 64 intervals.
*/
div = max_t(u32, 1, (u32)(bwlimit / (16 * 1024 * 1024)));
div = min_t(u32, 64, div);
/* Start new epoch, set deadline */
now = ktime_get();
if (sctx->throttle_deadline == 0) {
sctx->throttle_deadline = ktime_add_ms(now, time_slice / div);
sctx->throttle_sent = 0;
}
/* Still in the time to send? */
if (ktime_before(now, sctx->throttle_deadline)) {
/* If current bio is within the limit, send it */
sctx->throttle_sent += bio_size;
btrfs: scrub: per-device bandwidth control Add sysfs interface to limit io during scrub. We relied on the ionice interface to do that, eg. the idle class let the system usable while scrub was running. This has changed when mq-deadline got widespread and did not implement the scheduling classes. That was a CFQ thing that got deleted. We've got numerous complaints from users about degraded performance. Currently only BFQ supports that but it's not a common scheduler and we can't ask everybody to switch to it. Alternatively the cgroup io limiting can be used but that also a non-trivial setup (v2 required, the controller must be enabled on the system). This can still be used if desired. Other ideas that have been explored: piggy-back on ionice (that is set per-process and is accessible) and interpret the class and classdata as bandwidth limits, but this does not have enough flexibility as there are only 8 allowed and we'd have to map fixed limits to each value. Also adjusting the value would need to lookup the process that currently runs scrub on the given device, and the value is not sticky so would have to be adjusted each time scrub runs. Running out of options, sysfs does not look that bad: - it's accessible from scripts, or udev rules - the name is similar to what MD-RAID has (/proc/sys/dev/raid/speed_limit_max or /sys/block/mdX/md/sync_speed_max) - the value is sticky at least for filesystem mount time - adjusting the value has immediate effect - sysfs is available in constrained environments (eg. system rescue) - the limit also applies to device replace Sysfs: - raw value is in bytes - values written to the file accept suffixes like K, M - file is in the per-device directory /sys/fs/btrfs/FSID/devinfo/DEVID/scrub_speed_max - 0 means use default priority of IO The scheduler is a simple deadline one and the accuracy is up to nearest 128K. Signed-off-by: David Sterba <dsterba@suse.com>
2019-10-09 11:58:13 +00:00
if (sctx->throttle_sent <= div_u64(bwlimit, div))
return;
/* We're over the limit, sleep until the rest of the slice */
delta = ktime_ms_delta(sctx->throttle_deadline, now);
} else {
/* New request after deadline, start new epoch */
delta = 0;
}
if (delta) {
long timeout;
timeout = div_u64(delta * HZ, 1000);
schedule_timeout_interruptible(timeout);
}
/* Next call will start the deadline period */
sctx->throttle_deadline = 0;
}
/*
* Given a physical address, this will calculate it's
* logical offset. if this is a parity stripe, it will return
* the most left data stripe's logical offset.
*
* return 0 if it is a data stripe, 1 means parity stripe.
*/
static int get_raid56_logic_offset(u64 physical, int num,
2014-11-06 09:20:58 +00:00
struct map_lookup *map, u64 *offset,
u64 *stripe_start)
{
int i;
int j = 0;
u64 last_offset;
const int data_stripes = nr_data_stripes(map);
last_offset = (physical - map->stripes[num].physical) * data_stripes;
2014-11-06 09:20:58 +00:00
if (stripe_start)
*stripe_start = last_offset;
*offset = last_offset;
for (i = 0; i < data_stripes; i++) {
u32 stripe_nr;
u32 stripe_index;
u32 rot;
*offset = last_offset + btrfs_stripe_nr_to_offset(i);
stripe_nr = (u32)(*offset >> BTRFS_STRIPE_LEN_SHIFT) / data_stripes;
/* Work out the disk rotation on this stripe-set */
rot = stripe_nr % map->num_stripes;
/* calculate which stripe this data locates */
rot += i;
stripe_index = rot % map->num_stripes;
if (stripe_index == num)
return 0;
if (stripe_index < num)
j++;
}
*offset = last_offset + btrfs_stripe_nr_to_offset(j);
return 1;
}
/*
* Return 0 if the extent item range covers any byte of the range.
* Return <0 if the extent item is before @search_start.
* Return >0 if the extent item is after @start_start + @search_len.
*/
static int compare_extent_item_range(struct btrfs_path *path,
u64 search_start, u64 search_len)
{
struct btrfs_fs_info *fs_info = path->nodes[0]->fs_info;
u64 len;
struct btrfs_key key;
btrfs_item_key_to_cpu(path->nodes[0], &key, path->slots[0]);
ASSERT(key.type == BTRFS_EXTENT_ITEM_KEY ||
key.type == BTRFS_METADATA_ITEM_KEY);
if (key.type == BTRFS_METADATA_ITEM_KEY)
len = fs_info->nodesize;
else
len = key.offset;
if (key.objectid + len <= search_start)
return -1;
if (key.objectid >= search_start + search_len)
return 1;
return 0;
}
/*
* Locate one extent item which covers any byte in range
* [@search_start, @search_start + @search_length)
*
* If the path is not initialized, we will initialize the search by doing
* a btrfs_search_slot().
* If the path is already initialized, we will use the path as the initial
* slot, to avoid duplicated btrfs_search_slot() calls.
*
* NOTE: If an extent item starts before @search_start, we will still
* return the extent item. This is for data extent crossing stripe boundary.
*
* Return 0 if we found such extent item, and @path will point to the extent item.
* Return >0 if no such extent item can be found, and @path will be released.
* Return <0 if hit fatal error, and @path will be released.
*/
static int find_first_extent_item(struct btrfs_root *extent_root,
struct btrfs_path *path,
u64 search_start, u64 search_len)
{
struct btrfs_fs_info *fs_info = extent_root->fs_info;
struct btrfs_key key;
int ret;
/* Continue using the existing path */
if (path->nodes[0])
goto search_forward;
if (btrfs_fs_incompat(fs_info, SKINNY_METADATA))
key.type = BTRFS_METADATA_ITEM_KEY;
else
key.type = BTRFS_EXTENT_ITEM_KEY;
key.objectid = search_start;
key.offset = (u64)-1;
ret = btrfs_search_slot(NULL, extent_root, &key, path, 0, 0);
if (ret < 0)
return ret;
ASSERT(ret > 0);
/*
* Here we intentionally pass 0 as @min_objectid, as there could be
* an extent item starting before @search_start.
*/
ret = btrfs_previous_extent_item(extent_root, path, 0);
if (ret < 0)
return ret;
/*
* No matter whether we have found an extent item, the next loop will
* properly do every check on the key.
*/
search_forward:
while (true) {
btrfs_item_key_to_cpu(path->nodes[0], &key, path->slots[0]);
if (key.objectid >= search_start + search_len)
break;
if (key.type != BTRFS_METADATA_ITEM_KEY &&
key.type != BTRFS_EXTENT_ITEM_KEY)
goto next;
ret = compare_extent_item_range(path, search_start, search_len);
if (ret == 0)
return ret;
if (ret > 0)
break;
next:
path->slots[0]++;
if (path->slots[0] >= btrfs_header_nritems(path->nodes[0])) {
ret = btrfs_next_leaf(extent_root, path);
if (ret) {
/* Either no more item or fatal error */
btrfs_release_path(path);
return ret;
}
}
}
btrfs_release_path(path);
return 1;
}
static void get_extent_info(struct btrfs_path *path, u64 *extent_start_ret,
u64 *size_ret, u64 *flags_ret, u64 *generation_ret)
{
struct btrfs_key key;
struct btrfs_extent_item *ei;
btrfs_item_key_to_cpu(path->nodes[0], &key, path->slots[0]);
ASSERT(key.type == BTRFS_METADATA_ITEM_KEY ||
key.type == BTRFS_EXTENT_ITEM_KEY);
*extent_start_ret = key.objectid;
if (key.type == BTRFS_METADATA_ITEM_KEY)
*size_ret = path->nodes[0]->fs_info->nodesize;
else
*size_ret = key.offset;
ei = btrfs_item_ptr(path->nodes[0], path->slots[0], struct btrfs_extent_item);
*flags_ret = btrfs_extent_flags(path->nodes[0], ei);
*generation_ret = btrfs_extent_generation(path->nodes[0], ei);
}
static int sync_write_pointer_for_zoned(struct scrub_ctx *sctx, u64 logical,
u64 physical, u64 physical_end)
{
struct btrfs_fs_info *fs_info = sctx->fs_info;
int ret = 0;
if (!btrfs_is_zoned(fs_info))
return 0;
mutex_lock(&sctx->wr_lock);
if (sctx->write_pointer < physical_end) {
ret = btrfs_sync_zone_write_pointer(sctx->wr_tgtdev, logical,
physical,
sctx->write_pointer);
if (ret)
btrfs_err(fs_info,
"zoned: failed to recover write pointer");
}
mutex_unlock(&sctx->wr_lock);
btrfs_dev_clear_zone_empty(sctx->wr_tgtdev, physical);
return ret;
}
static void fill_one_extent_info(struct btrfs_fs_info *fs_info,
struct scrub_stripe *stripe,
u64 extent_start, u64 extent_len,
u64 extent_flags, u64 extent_gen)
{
for (u64 cur_logical = max(stripe->logical, extent_start);
cur_logical < min(stripe->logical + BTRFS_STRIPE_LEN,
extent_start + extent_len);
cur_logical += fs_info->sectorsize) {
const int nr_sector = (cur_logical - stripe->logical) >>
fs_info->sectorsize_bits;
struct scrub_sector_verification *sector =
&stripe->sectors[nr_sector];
set_bit(nr_sector, &stripe->extent_sector_bitmap);
if (extent_flags & BTRFS_EXTENT_FLAG_TREE_BLOCK) {
sector->is_metadata = true;
sector->generation = extent_gen;
}
}
}
static void scrub_stripe_reset_bitmaps(struct scrub_stripe *stripe)
{
stripe->extent_sector_bitmap = 0;
stripe->init_error_bitmap = 0;
btrfs: scrub: also report errors hit during the initial read [BUG] After the recent scrub rework introduced in commit e02ee89baa66 ("btrfs: scrub: switch scrub_simple_mirror() to scrub_stripe infrastructure"), btrfs scrub no longer reports repaired errors any more: # mkfs.btrfs -f $dev -d DUP # mount $dev $mnt # xfs_io -f -d -c "pwrite -b 64K -S 0xaa 0 64" $mnt/file # umount $dev # xfs_io -f -c "pwrite -S 0xff $phy1 64K" $dev # Corrupt the first mirror # mount $dev $mnt # btrfs scrub start -BR $mnt scrub done for 725e7cb7-8a4a-4c77-9f2a-86943619e218 Scrub started: Tue Jun 6 14:56:50 2023 Status: finished Duration: 0:00:00 data_extents_scrubbed: 2 tree_extents_scrubbed: 18 data_bytes_scrubbed: 131072 tree_bytes_scrubbed: 294912 read_errors: 0 csum_errors: 0 <<< No errors here verify_errors: 0 [...] uncorrectable_errors: 0 unverified_errors: 0 corrected_errors: 16 <<< Only corrected errors last_physical: 2723151872 This can confuse btrfs-progs, as it relies on the csum_errors to determine if there is anything wrong. While on v6.3.x kernels, the report is different: csum_errors: 16 <<< verify_errors: 0 [...] uncorrectable_errors: 0 unverified_errors: 0 corrected_errors: 16 <<< [CAUSE] In the reworked scrub, we update the scrub progress inside scrub_stripe_report_errors(), using various bitmaps to update the result. For example for csum_errors, we use bitmap_weight() of stripe->csum_error_bitmap. Unfortunately at that stage, all error bitmaps (except init_error_bitmap) are the result of the latest repair attempt, thus if the stripe is fully repaired, those error bitmaps will all be empty, resulting the above output mismatch. To fix this, record the number of errors into stripe->init_nr_*_errors. Since we don't really care about where those errors are, we only need to record the number of errors. Then in scrub_stripe_report_errors(), use those initial numbers to update the progress other than using the latest error bitmaps. Fixes: e02ee89baa66 ("btrfs: scrub: switch scrub_simple_mirror() to scrub_stripe infrastructure") Signed-off-by: Qu Wenruo <wqu@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2023-06-06 07:08:28 +00:00
stripe->init_nr_io_errors = 0;
stripe->init_nr_csum_errors = 0;
stripe->init_nr_meta_errors = 0;
stripe->error_bitmap = 0;
stripe->io_error_bitmap = 0;
stripe->csum_error_bitmap = 0;
stripe->meta_error_bitmap = 0;
}
/*
* Locate one stripe which has at least one extent in its range.
*
* Return 0 if found such stripe, and store its info into @stripe.
* Return >0 if there is no such stripe in the specified range.
* Return <0 for error.
*/
static int scrub_find_fill_first_stripe(struct btrfs_block_group *bg,
struct btrfs_path *extent_path,
struct btrfs_path *csum_path,
struct btrfs_device *dev, u64 physical,
int mirror_num, u64 logical_start,
u32 logical_len,
struct scrub_stripe *stripe)
{
struct btrfs_fs_info *fs_info = bg->fs_info;
struct btrfs_root *extent_root = btrfs_extent_root(fs_info, bg->start);
struct btrfs_root *csum_root = btrfs_csum_root(fs_info, bg->start);
const u64 logical_end = logical_start + logical_len;
u64 cur_logical = logical_start;
u64 stripe_end;
u64 extent_start;
u64 extent_len;
u64 extent_flags;
u64 extent_gen;
int ret;
memset(stripe->sectors, 0, sizeof(struct scrub_sector_verification) *
stripe->nr_sectors);
scrub_stripe_reset_bitmaps(stripe);
/* The range must be inside the bg. */
ASSERT(logical_start >= bg->start && logical_end <= bg->start + bg->length);
ret = find_first_extent_item(extent_root, extent_path, logical_start,
logical_len);
/* Either error or not found. */
if (ret)
goto out;
get_extent_info(extent_path, &extent_start, &extent_len, &extent_flags,
&extent_gen);
if (extent_flags & BTRFS_EXTENT_FLAG_TREE_BLOCK)
stripe->nr_meta_extents++;
if (extent_flags & BTRFS_EXTENT_FLAG_DATA)
stripe->nr_data_extents++;
cur_logical = max(extent_start, cur_logical);
/*
* Round down to stripe boundary.
*
* The extra calculation against bg->start is to handle block groups
* whose logical bytenr is not BTRFS_STRIPE_LEN aligned.
*/
stripe->logical = round_down(cur_logical - bg->start, BTRFS_STRIPE_LEN) +
bg->start;
stripe->physical = physical + stripe->logical - logical_start;
stripe->dev = dev;
stripe->bg = bg;
stripe->mirror_num = mirror_num;
stripe_end = stripe->logical + BTRFS_STRIPE_LEN - 1;
/* Fill the first extent info into stripe->sectors[] array. */
fill_one_extent_info(fs_info, stripe, extent_start, extent_len,
extent_flags, extent_gen);
cur_logical = extent_start + extent_len;
/* Fill the extent info for the remaining sectors. */
while (cur_logical <= stripe_end) {
ret = find_first_extent_item(extent_root, extent_path, cur_logical,
stripe_end - cur_logical + 1);
if (ret < 0)
goto out;
if (ret > 0) {
ret = 0;
break;
}
get_extent_info(extent_path, &extent_start, &extent_len,
&extent_flags, &extent_gen);
if (extent_flags & BTRFS_EXTENT_FLAG_TREE_BLOCK)
stripe->nr_meta_extents++;
if (extent_flags & BTRFS_EXTENT_FLAG_DATA)
stripe->nr_data_extents++;
fill_one_extent_info(fs_info, stripe, extent_start, extent_len,
extent_flags, extent_gen);
cur_logical = extent_start + extent_len;
}
/* Now fill the data csum. */
if (bg->flags & BTRFS_BLOCK_GROUP_DATA) {
int sector_nr;
unsigned long csum_bitmap = 0;
/* Csum space should have already been allocated. */
ASSERT(stripe->csums);
/*
* Our csum bitmap should be large enough, as BTRFS_STRIPE_LEN
* should contain at most 16 sectors.
*/
ASSERT(BITS_PER_LONG >= BTRFS_STRIPE_LEN >> fs_info->sectorsize_bits);
ret = btrfs_lookup_csums_bitmap(csum_root, csum_path,
stripe->logical, stripe_end,
stripe->csums, &csum_bitmap);
if (ret < 0)
goto out;
if (ret > 0)
ret = 0;
for_each_set_bit(sector_nr, &csum_bitmap, stripe->nr_sectors) {
stripe->sectors[sector_nr].csum = stripe->csums +
sector_nr * fs_info->csum_size;
}
}
set_bit(SCRUB_STRIPE_FLAG_INITIALIZED, &stripe->state);
out:
return ret;
}
static void scrub_reset_stripe(struct scrub_stripe *stripe)
{
scrub_stripe_reset_bitmaps(stripe);
stripe->nr_meta_extents = 0;
stripe->nr_data_extents = 0;
stripe->state = 0;
for (int i = 0; i < stripe->nr_sectors; i++) {
stripe->sectors[i].is_metadata = false;
stripe->sectors[i].csum = NULL;
stripe->sectors[i].generation = 0;
}
}
static void scrub_submit_extent_sector_read(struct scrub_ctx *sctx,
struct scrub_stripe *stripe)
{
struct btrfs_fs_info *fs_info = stripe->bg->fs_info;
struct btrfs_bio *bbio = NULL;
u64 stripe_len = BTRFS_STRIPE_LEN;
int mirror = stripe->mirror_num;
int i;
atomic_inc(&stripe->pending_io);
for_each_set_bit(i, &stripe->extent_sector_bitmap, stripe->nr_sectors) {
struct page *page = scrub_stripe_get_page(stripe, i);
unsigned int pgoff = scrub_stripe_get_page_offset(stripe, i);
/* The current sector cannot be merged, submit the bio. */
if (bbio &&
((i > 0 &&
!test_bit(i - 1, &stripe->extent_sector_bitmap)) ||
bbio->bio.bi_iter.bi_size >= stripe_len)) {
ASSERT(bbio->bio.bi_iter.bi_size);
atomic_inc(&stripe->pending_io);
btrfs_submit_bio(bbio, mirror);
bbio = NULL;
}
if (!bbio) {
struct btrfs_io_stripe io_stripe = {};
struct btrfs_io_context *bioc = NULL;
const u64 logical = stripe->logical +
(i << fs_info->sectorsize_bits);
int err;
bbio = btrfs_bio_alloc(stripe->nr_sectors, REQ_OP_READ,
fs_info, scrub_read_endio, stripe);
bbio->bio.bi_iter.bi_sector = logical >> SECTOR_SHIFT;
io_stripe.is_scrub = true;
err = btrfs_map_block(fs_info, BTRFS_MAP_READ, logical,
&stripe_len, &bioc, &io_stripe,
&mirror);
btrfs_put_bioc(bioc);
if (err) {
btrfs_bio_end_io(bbio,
errno_to_blk_status(err));
return;
}
}
__bio_add_page(&bbio->bio, page, fs_info->sectorsize, pgoff);
}
if (bbio) {
ASSERT(bbio->bio.bi_iter.bi_size);
atomic_inc(&stripe->pending_io);
btrfs_submit_bio(bbio, mirror);
}
if (atomic_dec_and_test(&stripe->pending_io)) {
wake_up(&stripe->io_wait);
INIT_WORK(&stripe->work, scrub_stripe_read_repair_worker);
queue_work(stripe->bg->fs_info->scrub_workers, &stripe->work);
}
}
static void scrub_submit_initial_read(struct scrub_ctx *sctx,
struct scrub_stripe *stripe)
{
struct btrfs_fs_info *fs_info = sctx->fs_info;
struct btrfs_bio *bbio;
int mirror = stripe->mirror_num;
ASSERT(stripe->bg);
ASSERT(stripe->mirror_num > 0);
ASSERT(test_bit(SCRUB_STRIPE_FLAG_INITIALIZED, &stripe->state));
if (btrfs_need_stripe_tree_update(fs_info, stripe->bg->flags)) {
scrub_submit_extent_sector_read(sctx, stripe);
return;
}
bbio = btrfs_bio_alloc(SCRUB_STRIPE_PAGES, REQ_OP_READ, fs_info,
scrub_read_endio, stripe);
/* Read the whole stripe. */
bbio->bio.bi_iter.bi_sector = stripe->logical >> SECTOR_SHIFT;
for (int i = 0; i < BTRFS_STRIPE_LEN >> PAGE_SHIFT; i++) {
int ret;
ret = bio_add_page(&bbio->bio, stripe->pages[i], PAGE_SIZE, 0);
/* We should have allocated enough bio vectors. */
ASSERT(ret == PAGE_SIZE);
}
atomic_inc(&stripe->pending_io);
/*
* For dev-replace, either user asks to avoid the source dev, or
* the device is missing, we try the next mirror instead.
*/
if (sctx->is_dev_replace &&
(fs_info->dev_replace.cont_reading_from_srcdev_mode ==
BTRFS_DEV_REPLACE_ITEM_CONT_READING_FROM_SRCDEV_MODE_AVOID ||
!stripe->dev->bdev)) {
int num_copies = btrfs_num_copies(fs_info, stripe->bg->start,
stripe->bg->length);
mirror = calc_next_mirror(mirror, num_copies);
}
btrfs_submit_bio(bbio, mirror);
}
btrfs: dev-replace: error out if we have unrepaired metadata error during [BUG] Even before the scrub rework, if we have some corrupted metadata failed to be repaired during replace, we still continue replacing and let it finish just as there is nothing wrong: BTRFS info (device dm-4): dev_replace from /dev/mapper/test-scratch1 (devid 1) to /dev/mapper/test-scratch2 started BTRFS warning (device dm-4): tree block 5578752 mirror 1 has bad csum, has 0x00000000 want 0xade80ca1 BTRFS warning (device dm-4): tree block 5578752 mirror 0 has bad csum, has 0x00000000 want 0xade80ca1 BTRFS warning (device dm-4): checksum error at logical 5578752 on dev /dev/mapper/test-scratch1, physical 5578752: metadata leaf (level 0) in tree 5 BTRFS warning (device dm-4): checksum error at logical 5578752 on dev /dev/mapper/test-scratch1, physical 5578752: metadata leaf (level 0) in tree 5 BTRFS error (device dm-4): bdev /dev/mapper/test-scratch1 errs: wr 0, rd 0, flush 0, corrupt 1, gen 0 BTRFS warning (device dm-4): tree block 5578752 mirror 1 has bad bytenr, has 0 want 5578752 BTRFS error (device dm-4): unable to fixup (regular) error at logical 5578752 on dev /dev/mapper/test-scratch1 BTRFS info (device dm-4): dev_replace from /dev/mapper/test-scratch1 (devid 1) to /dev/mapper/test-scratch2 finished This can lead to unexpected problems for the resulting filesystem. [CAUSE] Btrfs reuses scrub code path for dev-replace to iterate all dev extents. But unlike scrub, dev-replace doesn't really bother to check the scrub progress, which records all the errors found during replace. And even if we check the progress, we cannot really determine which errors are minor, which are critical just by the plain numbers. (remember we don't treat metadata/data checksum error differently). This behavior is there from the very beginning. [FIX] Instead of continuing the replace, just error out if we hit an unrepaired metadata sector. Now the dev-replace would be rejected with -EIO, to let the user know. Although it also means, the filesystem has some metadata error which cannot be repaired, the user would be upset anyway. The new dmesg would look like this: BTRFS info (device dm-4): dev_replace from /dev/mapper/test-scratch1 (devid 1) to /dev/mapper/test-scratch2 started BTRFS warning (device dm-4): tree block 5578752 mirror 1 has bad csum, has 0x00000000 want 0xade80ca1 BTRFS warning (device dm-4): tree block 5578752 mirror 1 has bad csum, has 0x00000000 want 0xade80ca1 BTRFS error (device dm-4): unable to fixup (regular) error at logical 5570560 on dev /dev/mapper/test-scratch1 physical 5570560 BTRFS warning (device dm-4): header error at logical 5570560 on dev /dev/mapper/test-scratch1, physical 5570560: metadata leaf (level 0) in tree 5 BTRFS warning (device dm-4): header error at logical 5570560 on dev /dev/mapper/test-scratch1, physical 5570560: metadata leaf (level 0) in tree 5 BTRFS error (device dm-4): stripe 5570560 has unrepaired metadata sector at 5578752 BTRFS error (device dm-4): btrfs_scrub_dev(/dev/mapper/test-scratch1, 1, /dev/mapper/test-scratch2) failed -5 Signed-off-by: Qu Wenruo <wqu@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2023-04-06 07:26:29 +00:00
static bool stripe_has_metadata_error(struct scrub_stripe *stripe)
{
int i;
for_each_set_bit(i, &stripe->error_bitmap, stripe->nr_sectors) {
if (stripe->sectors[i].is_metadata) {
struct btrfs_fs_info *fs_info = stripe->bg->fs_info;
btrfs_err(fs_info,
"stripe %llu has unrepaired metadata sector at %llu",
stripe->logical,
stripe->logical + (i << fs_info->sectorsize_bits));
return true;
}
}
return false;
}
btrfs: scrub: fix grouping of read IO [REGRESSION] There are several regression reports about the scrub performance with v6.4 kernel. On a PCIe 3.0 device, the old v6.3 kernel can go 3GB/s scrub speed, but v6.4 can only go 1GB/s, an obvious 66% performance drop. [CAUSE] Iostat shows a very different behavior between v6.3 and v6.4 kernel: Device r/s rkB/s rrqm/s %rrqm r_await rareq-sz aqu-sz %util nvme0n1p3 9731.00 3425544.00 17237.00 63.92 2.18 352.02 21.18 100.00 nvme0n1p3 15578.00 993616.00 5.00 0.03 0.09 63.78 1.32 100.00 The upper one is v6.3 while the lower one is v6.4. There are several obvious differences: - Very few read merges This turns out to be a behavior change that we no longer do bio plug/unplug. - Very low aqu-sz This is due to the submit-and-wait behavior of flush_scrub_stripes(), and extra extent/csum tree search. Both behaviors are not that obvious on SATA SSDs, as SATA SSDs have NCQ to merge the reads, while SATA SSDs can not handle high queue depth well either. [FIX] For now this patch focuses on the read speed fix. Dev-replace replace speed needs more work. For the read part, we go two directions to fix the problems: - Re-introduce blk plug/unplug to merge read requests This is pretty simple, and the behavior is pretty easy to observe. This would enlarge the average read request size to 512K. - Introduce multi-group reads and no longer wait for each group Instead of the old behavior, which submits 8 stripes and waits for them, here we would enlarge the total number of stripes to 16 * 8. Which is 8M per device, the same limit as the old scrub in-flight bios size limit. Now every time we fill a group (8 stripes), we submit them and continue to next stripes. Only when the full 16 * 8 stripes are all filled, we submit the remaining ones (the last group), and wait for all groups to finish. Then submit the repair writes and dev-replace writes. This should enlarge the queue depth. This would greatly improve the merge rate (thus read block size) and queue depth: Before (with regression, and cached extent/csum path): Device r/s rkB/s rrqm/s %rrqm r_await rareq-sz aqu-sz %util nvme0n1p3 20666.00 1318240.00 10.00 0.05 0.08 63.79 1.63 100.00 After (with all patches applied): nvme0n1p3 5165.00 2278304.00 30557.00 85.54 0.55 441.10 2.81 100.00 i.e. 1287 to 2224 MB/s. CC: stable@vger.kernel.org # 6.4+ Signed-off-by: Qu Wenruo <wqu@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2023-08-03 06:33:31 +00:00
static void submit_initial_group_read(struct scrub_ctx *sctx,
unsigned int first_slot,
unsigned int nr_stripes)
{
struct blk_plug plug;
ASSERT(first_slot < SCRUB_TOTAL_STRIPES);
ASSERT(first_slot + nr_stripes <= SCRUB_TOTAL_STRIPES);
scrub_throttle_dev_io(sctx, sctx->stripes[0].dev,
btrfs_stripe_nr_to_offset(nr_stripes));
blk_start_plug(&plug);
for (int i = 0; i < nr_stripes; i++) {
struct scrub_stripe *stripe = &sctx->stripes[first_slot + i];
/* Those stripes should be initialized. */
ASSERT(test_bit(SCRUB_STRIPE_FLAG_INITIALIZED, &stripe->state));
scrub_submit_initial_read(sctx, stripe);
}
blk_finish_plug(&plug);
}
btrfs: dev-replace: error out if we have unrepaired metadata error during [BUG] Even before the scrub rework, if we have some corrupted metadata failed to be repaired during replace, we still continue replacing and let it finish just as there is nothing wrong: BTRFS info (device dm-4): dev_replace from /dev/mapper/test-scratch1 (devid 1) to /dev/mapper/test-scratch2 started BTRFS warning (device dm-4): tree block 5578752 mirror 1 has bad csum, has 0x00000000 want 0xade80ca1 BTRFS warning (device dm-4): tree block 5578752 mirror 0 has bad csum, has 0x00000000 want 0xade80ca1 BTRFS warning (device dm-4): checksum error at logical 5578752 on dev /dev/mapper/test-scratch1, physical 5578752: metadata leaf (level 0) in tree 5 BTRFS warning (device dm-4): checksum error at logical 5578752 on dev /dev/mapper/test-scratch1, physical 5578752: metadata leaf (level 0) in tree 5 BTRFS error (device dm-4): bdev /dev/mapper/test-scratch1 errs: wr 0, rd 0, flush 0, corrupt 1, gen 0 BTRFS warning (device dm-4): tree block 5578752 mirror 1 has bad bytenr, has 0 want 5578752 BTRFS error (device dm-4): unable to fixup (regular) error at logical 5578752 on dev /dev/mapper/test-scratch1 BTRFS info (device dm-4): dev_replace from /dev/mapper/test-scratch1 (devid 1) to /dev/mapper/test-scratch2 finished This can lead to unexpected problems for the resulting filesystem. [CAUSE] Btrfs reuses scrub code path for dev-replace to iterate all dev extents. But unlike scrub, dev-replace doesn't really bother to check the scrub progress, which records all the errors found during replace. And even if we check the progress, we cannot really determine which errors are minor, which are critical just by the plain numbers. (remember we don't treat metadata/data checksum error differently). This behavior is there from the very beginning. [FIX] Instead of continuing the replace, just error out if we hit an unrepaired metadata sector. Now the dev-replace would be rejected with -EIO, to let the user know. Although it also means, the filesystem has some metadata error which cannot be repaired, the user would be upset anyway. The new dmesg would look like this: BTRFS info (device dm-4): dev_replace from /dev/mapper/test-scratch1 (devid 1) to /dev/mapper/test-scratch2 started BTRFS warning (device dm-4): tree block 5578752 mirror 1 has bad csum, has 0x00000000 want 0xade80ca1 BTRFS warning (device dm-4): tree block 5578752 mirror 1 has bad csum, has 0x00000000 want 0xade80ca1 BTRFS error (device dm-4): unable to fixup (regular) error at logical 5570560 on dev /dev/mapper/test-scratch1 physical 5570560 BTRFS warning (device dm-4): header error at logical 5570560 on dev /dev/mapper/test-scratch1, physical 5570560: metadata leaf (level 0) in tree 5 BTRFS warning (device dm-4): header error at logical 5570560 on dev /dev/mapper/test-scratch1, physical 5570560: metadata leaf (level 0) in tree 5 BTRFS error (device dm-4): stripe 5570560 has unrepaired metadata sector at 5578752 BTRFS error (device dm-4): btrfs_scrub_dev(/dev/mapper/test-scratch1, 1, /dev/mapper/test-scratch2) failed -5 Signed-off-by: Qu Wenruo <wqu@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2023-04-06 07:26:29 +00:00
static int flush_scrub_stripes(struct scrub_ctx *sctx)
{
struct btrfs_fs_info *fs_info = sctx->fs_info;
struct scrub_stripe *stripe;
const int nr_stripes = sctx->cur_stripe;
btrfs: dev-replace: error out if we have unrepaired metadata error during [BUG] Even before the scrub rework, if we have some corrupted metadata failed to be repaired during replace, we still continue replacing and let it finish just as there is nothing wrong: BTRFS info (device dm-4): dev_replace from /dev/mapper/test-scratch1 (devid 1) to /dev/mapper/test-scratch2 started BTRFS warning (device dm-4): tree block 5578752 mirror 1 has bad csum, has 0x00000000 want 0xade80ca1 BTRFS warning (device dm-4): tree block 5578752 mirror 0 has bad csum, has 0x00000000 want 0xade80ca1 BTRFS warning (device dm-4): checksum error at logical 5578752 on dev /dev/mapper/test-scratch1, physical 5578752: metadata leaf (level 0) in tree 5 BTRFS warning (device dm-4): checksum error at logical 5578752 on dev /dev/mapper/test-scratch1, physical 5578752: metadata leaf (level 0) in tree 5 BTRFS error (device dm-4): bdev /dev/mapper/test-scratch1 errs: wr 0, rd 0, flush 0, corrupt 1, gen 0 BTRFS warning (device dm-4): tree block 5578752 mirror 1 has bad bytenr, has 0 want 5578752 BTRFS error (device dm-4): unable to fixup (regular) error at logical 5578752 on dev /dev/mapper/test-scratch1 BTRFS info (device dm-4): dev_replace from /dev/mapper/test-scratch1 (devid 1) to /dev/mapper/test-scratch2 finished This can lead to unexpected problems for the resulting filesystem. [CAUSE] Btrfs reuses scrub code path for dev-replace to iterate all dev extents. But unlike scrub, dev-replace doesn't really bother to check the scrub progress, which records all the errors found during replace. And even if we check the progress, we cannot really determine which errors are minor, which are critical just by the plain numbers. (remember we don't treat metadata/data checksum error differently). This behavior is there from the very beginning. [FIX] Instead of continuing the replace, just error out if we hit an unrepaired metadata sector. Now the dev-replace would be rejected with -EIO, to let the user know. Although it also means, the filesystem has some metadata error which cannot be repaired, the user would be upset anyway. The new dmesg would look like this: BTRFS info (device dm-4): dev_replace from /dev/mapper/test-scratch1 (devid 1) to /dev/mapper/test-scratch2 started BTRFS warning (device dm-4): tree block 5578752 mirror 1 has bad csum, has 0x00000000 want 0xade80ca1 BTRFS warning (device dm-4): tree block 5578752 mirror 1 has bad csum, has 0x00000000 want 0xade80ca1 BTRFS error (device dm-4): unable to fixup (regular) error at logical 5570560 on dev /dev/mapper/test-scratch1 physical 5570560 BTRFS warning (device dm-4): header error at logical 5570560 on dev /dev/mapper/test-scratch1, physical 5570560: metadata leaf (level 0) in tree 5 BTRFS warning (device dm-4): header error at logical 5570560 on dev /dev/mapper/test-scratch1, physical 5570560: metadata leaf (level 0) in tree 5 BTRFS error (device dm-4): stripe 5570560 has unrepaired metadata sector at 5578752 BTRFS error (device dm-4): btrfs_scrub_dev(/dev/mapper/test-scratch1, 1, /dev/mapper/test-scratch2) failed -5 Signed-off-by: Qu Wenruo <wqu@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2023-04-06 07:26:29 +00:00
int ret = 0;
if (!nr_stripes)
btrfs: dev-replace: error out if we have unrepaired metadata error during [BUG] Even before the scrub rework, if we have some corrupted metadata failed to be repaired during replace, we still continue replacing and let it finish just as there is nothing wrong: BTRFS info (device dm-4): dev_replace from /dev/mapper/test-scratch1 (devid 1) to /dev/mapper/test-scratch2 started BTRFS warning (device dm-4): tree block 5578752 mirror 1 has bad csum, has 0x00000000 want 0xade80ca1 BTRFS warning (device dm-4): tree block 5578752 mirror 0 has bad csum, has 0x00000000 want 0xade80ca1 BTRFS warning (device dm-4): checksum error at logical 5578752 on dev /dev/mapper/test-scratch1, physical 5578752: metadata leaf (level 0) in tree 5 BTRFS warning (device dm-4): checksum error at logical 5578752 on dev /dev/mapper/test-scratch1, physical 5578752: metadata leaf (level 0) in tree 5 BTRFS error (device dm-4): bdev /dev/mapper/test-scratch1 errs: wr 0, rd 0, flush 0, corrupt 1, gen 0 BTRFS warning (device dm-4): tree block 5578752 mirror 1 has bad bytenr, has 0 want 5578752 BTRFS error (device dm-4): unable to fixup (regular) error at logical 5578752 on dev /dev/mapper/test-scratch1 BTRFS info (device dm-4): dev_replace from /dev/mapper/test-scratch1 (devid 1) to /dev/mapper/test-scratch2 finished This can lead to unexpected problems for the resulting filesystem. [CAUSE] Btrfs reuses scrub code path for dev-replace to iterate all dev extents. But unlike scrub, dev-replace doesn't really bother to check the scrub progress, which records all the errors found during replace. And even if we check the progress, we cannot really determine which errors are minor, which are critical just by the plain numbers. (remember we don't treat metadata/data checksum error differently). This behavior is there from the very beginning. [FIX] Instead of continuing the replace, just error out if we hit an unrepaired metadata sector. Now the dev-replace would be rejected with -EIO, to let the user know. Although it also means, the filesystem has some metadata error which cannot be repaired, the user would be upset anyway. The new dmesg would look like this: BTRFS info (device dm-4): dev_replace from /dev/mapper/test-scratch1 (devid 1) to /dev/mapper/test-scratch2 started BTRFS warning (device dm-4): tree block 5578752 mirror 1 has bad csum, has 0x00000000 want 0xade80ca1 BTRFS warning (device dm-4): tree block 5578752 mirror 1 has bad csum, has 0x00000000 want 0xade80ca1 BTRFS error (device dm-4): unable to fixup (regular) error at logical 5570560 on dev /dev/mapper/test-scratch1 physical 5570560 BTRFS warning (device dm-4): header error at logical 5570560 on dev /dev/mapper/test-scratch1, physical 5570560: metadata leaf (level 0) in tree 5 BTRFS warning (device dm-4): header error at logical 5570560 on dev /dev/mapper/test-scratch1, physical 5570560: metadata leaf (level 0) in tree 5 BTRFS error (device dm-4): stripe 5570560 has unrepaired metadata sector at 5578752 BTRFS error (device dm-4): btrfs_scrub_dev(/dev/mapper/test-scratch1, 1, /dev/mapper/test-scratch2) failed -5 Signed-off-by: Qu Wenruo <wqu@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2023-04-06 07:26:29 +00:00
return 0;
ASSERT(test_bit(SCRUB_STRIPE_FLAG_INITIALIZED, &sctx->stripes[0].state));
btrfs: scrub: fix grouping of read IO [REGRESSION] There are several regression reports about the scrub performance with v6.4 kernel. On a PCIe 3.0 device, the old v6.3 kernel can go 3GB/s scrub speed, but v6.4 can only go 1GB/s, an obvious 66% performance drop. [CAUSE] Iostat shows a very different behavior between v6.3 and v6.4 kernel: Device r/s rkB/s rrqm/s %rrqm r_await rareq-sz aqu-sz %util nvme0n1p3 9731.00 3425544.00 17237.00 63.92 2.18 352.02 21.18 100.00 nvme0n1p3 15578.00 993616.00 5.00 0.03 0.09 63.78 1.32 100.00 The upper one is v6.3 while the lower one is v6.4. There are several obvious differences: - Very few read merges This turns out to be a behavior change that we no longer do bio plug/unplug. - Very low aqu-sz This is due to the submit-and-wait behavior of flush_scrub_stripes(), and extra extent/csum tree search. Both behaviors are not that obvious on SATA SSDs, as SATA SSDs have NCQ to merge the reads, while SATA SSDs can not handle high queue depth well either. [FIX] For now this patch focuses on the read speed fix. Dev-replace replace speed needs more work. For the read part, we go two directions to fix the problems: - Re-introduce blk plug/unplug to merge read requests This is pretty simple, and the behavior is pretty easy to observe. This would enlarge the average read request size to 512K. - Introduce multi-group reads and no longer wait for each group Instead of the old behavior, which submits 8 stripes and waits for them, here we would enlarge the total number of stripes to 16 * 8. Which is 8M per device, the same limit as the old scrub in-flight bios size limit. Now every time we fill a group (8 stripes), we submit them and continue to next stripes. Only when the full 16 * 8 stripes are all filled, we submit the remaining ones (the last group), and wait for all groups to finish. Then submit the repair writes and dev-replace writes. This should enlarge the queue depth. This would greatly improve the merge rate (thus read block size) and queue depth: Before (with regression, and cached extent/csum path): Device r/s rkB/s rrqm/s %rrqm r_await rareq-sz aqu-sz %util nvme0n1p3 20666.00 1318240.00 10.00 0.05 0.08 63.79 1.63 100.00 After (with all patches applied): nvme0n1p3 5165.00 2278304.00 30557.00 85.54 0.55 441.10 2.81 100.00 i.e. 1287 to 2224 MB/s. CC: stable@vger.kernel.org # 6.4+ Signed-off-by: Qu Wenruo <wqu@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2023-08-03 06:33:31 +00:00
/* Submit the stripes which are populated but not submitted. */
if (nr_stripes % SCRUB_STRIPES_PER_GROUP) {
const int first_slot = round_down(nr_stripes, SCRUB_STRIPES_PER_GROUP);
submit_initial_group_read(sctx, first_slot, nr_stripes - first_slot);
}
for (int i = 0; i < nr_stripes; i++) {
stripe = &sctx->stripes[i];
wait_event(stripe->repair_wait,
test_bit(SCRUB_STRIPE_FLAG_REPAIR_DONE, &stripe->state));
}
/* Submit for dev-replace. */
if (sctx->is_dev_replace) {
btrfs: dev-replace: error out if we have unrepaired metadata error during [BUG] Even before the scrub rework, if we have some corrupted metadata failed to be repaired during replace, we still continue replacing and let it finish just as there is nothing wrong: BTRFS info (device dm-4): dev_replace from /dev/mapper/test-scratch1 (devid 1) to /dev/mapper/test-scratch2 started BTRFS warning (device dm-4): tree block 5578752 mirror 1 has bad csum, has 0x00000000 want 0xade80ca1 BTRFS warning (device dm-4): tree block 5578752 mirror 0 has bad csum, has 0x00000000 want 0xade80ca1 BTRFS warning (device dm-4): checksum error at logical 5578752 on dev /dev/mapper/test-scratch1, physical 5578752: metadata leaf (level 0) in tree 5 BTRFS warning (device dm-4): checksum error at logical 5578752 on dev /dev/mapper/test-scratch1, physical 5578752: metadata leaf (level 0) in tree 5 BTRFS error (device dm-4): bdev /dev/mapper/test-scratch1 errs: wr 0, rd 0, flush 0, corrupt 1, gen 0 BTRFS warning (device dm-4): tree block 5578752 mirror 1 has bad bytenr, has 0 want 5578752 BTRFS error (device dm-4): unable to fixup (regular) error at logical 5578752 on dev /dev/mapper/test-scratch1 BTRFS info (device dm-4): dev_replace from /dev/mapper/test-scratch1 (devid 1) to /dev/mapper/test-scratch2 finished This can lead to unexpected problems for the resulting filesystem. [CAUSE] Btrfs reuses scrub code path for dev-replace to iterate all dev extents. But unlike scrub, dev-replace doesn't really bother to check the scrub progress, which records all the errors found during replace. And even if we check the progress, we cannot really determine which errors are minor, which are critical just by the plain numbers. (remember we don't treat metadata/data checksum error differently). This behavior is there from the very beginning. [FIX] Instead of continuing the replace, just error out if we hit an unrepaired metadata sector. Now the dev-replace would be rejected with -EIO, to let the user know. Although it also means, the filesystem has some metadata error which cannot be repaired, the user would be upset anyway. The new dmesg would look like this: BTRFS info (device dm-4): dev_replace from /dev/mapper/test-scratch1 (devid 1) to /dev/mapper/test-scratch2 started BTRFS warning (device dm-4): tree block 5578752 mirror 1 has bad csum, has 0x00000000 want 0xade80ca1 BTRFS warning (device dm-4): tree block 5578752 mirror 1 has bad csum, has 0x00000000 want 0xade80ca1 BTRFS error (device dm-4): unable to fixup (regular) error at logical 5570560 on dev /dev/mapper/test-scratch1 physical 5570560 BTRFS warning (device dm-4): header error at logical 5570560 on dev /dev/mapper/test-scratch1, physical 5570560: metadata leaf (level 0) in tree 5 BTRFS warning (device dm-4): header error at logical 5570560 on dev /dev/mapper/test-scratch1, physical 5570560: metadata leaf (level 0) in tree 5 BTRFS error (device dm-4): stripe 5570560 has unrepaired metadata sector at 5578752 BTRFS error (device dm-4): btrfs_scrub_dev(/dev/mapper/test-scratch1, 1, /dev/mapper/test-scratch2) failed -5 Signed-off-by: Qu Wenruo <wqu@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2023-04-06 07:26:29 +00:00
/*
* For dev-replace, if we know there is something wrong with
* metadata, we should immedately abort.
*/
for (int i = 0; i < nr_stripes; i++) {
if (stripe_has_metadata_error(&sctx->stripes[i])) {
ret = -EIO;
goto out;
}
}
for (int i = 0; i < nr_stripes; i++) {
unsigned long good;
stripe = &sctx->stripes[i];
ASSERT(stripe->dev == fs_info->dev_replace.srcdev);
bitmap_andnot(&good, &stripe->extent_sector_bitmap,
&stripe->error_bitmap, stripe->nr_sectors);
scrub_write_sectors(sctx, stripe, good, true);
}
}
/* Wait for the above writebacks to finish. */
for (int i = 0; i < nr_stripes; i++) {
stripe = &sctx->stripes[i];
wait_scrub_stripe_io(stripe);
scrub_reset_stripe(stripe);
}
btrfs: dev-replace: error out if we have unrepaired metadata error during [BUG] Even before the scrub rework, if we have some corrupted metadata failed to be repaired during replace, we still continue replacing and let it finish just as there is nothing wrong: BTRFS info (device dm-4): dev_replace from /dev/mapper/test-scratch1 (devid 1) to /dev/mapper/test-scratch2 started BTRFS warning (device dm-4): tree block 5578752 mirror 1 has bad csum, has 0x00000000 want 0xade80ca1 BTRFS warning (device dm-4): tree block 5578752 mirror 0 has bad csum, has 0x00000000 want 0xade80ca1 BTRFS warning (device dm-4): checksum error at logical 5578752 on dev /dev/mapper/test-scratch1, physical 5578752: metadata leaf (level 0) in tree 5 BTRFS warning (device dm-4): checksum error at logical 5578752 on dev /dev/mapper/test-scratch1, physical 5578752: metadata leaf (level 0) in tree 5 BTRFS error (device dm-4): bdev /dev/mapper/test-scratch1 errs: wr 0, rd 0, flush 0, corrupt 1, gen 0 BTRFS warning (device dm-4): tree block 5578752 mirror 1 has bad bytenr, has 0 want 5578752 BTRFS error (device dm-4): unable to fixup (regular) error at logical 5578752 on dev /dev/mapper/test-scratch1 BTRFS info (device dm-4): dev_replace from /dev/mapper/test-scratch1 (devid 1) to /dev/mapper/test-scratch2 finished This can lead to unexpected problems for the resulting filesystem. [CAUSE] Btrfs reuses scrub code path for dev-replace to iterate all dev extents. But unlike scrub, dev-replace doesn't really bother to check the scrub progress, which records all the errors found during replace. And even if we check the progress, we cannot really determine which errors are minor, which are critical just by the plain numbers. (remember we don't treat metadata/data checksum error differently). This behavior is there from the very beginning. [FIX] Instead of continuing the replace, just error out if we hit an unrepaired metadata sector. Now the dev-replace would be rejected with -EIO, to let the user know. Although it also means, the filesystem has some metadata error which cannot be repaired, the user would be upset anyway. The new dmesg would look like this: BTRFS info (device dm-4): dev_replace from /dev/mapper/test-scratch1 (devid 1) to /dev/mapper/test-scratch2 started BTRFS warning (device dm-4): tree block 5578752 mirror 1 has bad csum, has 0x00000000 want 0xade80ca1 BTRFS warning (device dm-4): tree block 5578752 mirror 1 has bad csum, has 0x00000000 want 0xade80ca1 BTRFS error (device dm-4): unable to fixup (regular) error at logical 5570560 on dev /dev/mapper/test-scratch1 physical 5570560 BTRFS warning (device dm-4): header error at logical 5570560 on dev /dev/mapper/test-scratch1, physical 5570560: metadata leaf (level 0) in tree 5 BTRFS warning (device dm-4): header error at logical 5570560 on dev /dev/mapper/test-scratch1, physical 5570560: metadata leaf (level 0) in tree 5 BTRFS error (device dm-4): stripe 5570560 has unrepaired metadata sector at 5578752 BTRFS error (device dm-4): btrfs_scrub_dev(/dev/mapper/test-scratch1, 1, /dev/mapper/test-scratch2) failed -5 Signed-off-by: Qu Wenruo <wqu@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2023-04-06 07:26:29 +00:00
out:
sctx->cur_stripe = 0;
btrfs: dev-replace: error out if we have unrepaired metadata error during [BUG] Even before the scrub rework, if we have some corrupted metadata failed to be repaired during replace, we still continue replacing and let it finish just as there is nothing wrong: BTRFS info (device dm-4): dev_replace from /dev/mapper/test-scratch1 (devid 1) to /dev/mapper/test-scratch2 started BTRFS warning (device dm-4): tree block 5578752 mirror 1 has bad csum, has 0x00000000 want 0xade80ca1 BTRFS warning (device dm-4): tree block 5578752 mirror 0 has bad csum, has 0x00000000 want 0xade80ca1 BTRFS warning (device dm-4): checksum error at logical 5578752 on dev /dev/mapper/test-scratch1, physical 5578752: metadata leaf (level 0) in tree 5 BTRFS warning (device dm-4): checksum error at logical 5578752 on dev /dev/mapper/test-scratch1, physical 5578752: metadata leaf (level 0) in tree 5 BTRFS error (device dm-4): bdev /dev/mapper/test-scratch1 errs: wr 0, rd 0, flush 0, corrupt 1, gen 0 BTRFS warning (device dm-4): tree block 5578752 mirror 1 has bad bytenr, has 0 want 5578752 BTRFS error (device dm-4): unable to fixup (regular) error at logical 5578752 on dev /dev/mapper/test-scratch1 BTRFS info (device dm-4): dev_replace from /dev/mapper/test-scratch1 (devid 1) to /dev/mapper/test-scratch2 finished This can lead to unexpected problems for the resulting filesystem. [CAUSE] Btrfs reuses scrub code path for dev-replace to iterate all dev extents. But unlike scrub, dev-replace doesn't really bother to check the scrub progress, which records all the errors found during replace. And even if we check the progress, we cannot really determine which errors are minor, which are critical just by the plain numbers. (remember we don't treat metadata/data checksum error differently). This behavior is there from the very beginning. [FIX] Instead of continuing the replace, just error out if we hit an unrepaired metadata sector. Now the dev-replace would be rejected with -EIO, to let the user know. Although it also means, the filesystem has some metadata error which cannot be repaired, the user would be upset anyway. The new dmesg would look like this: BTRFS info (device dm-4): dev_replace from /dev/mapper/test-scratch1 (devid 1) to /dev/mapper/test-scratch2 started BTRFS warning (device dm-4): tree block 5578752 mirror 1 has bad csum, has 0x00000000 want 0xade80ca1 BTRFS warning (device dm-4): tree block 5578752 mirror 1 has bad csum, has 0x00000000 want 0xade80ca1 BTRFS error (device dm-4): unable to fixup (regular) error at logical 5570560 on dev /dev/mapper/test-scratch1 physical 5570560 BTRFS warning (device dm-4): header error at logical 5570560 on dev /dev/mapper/test-scratch1, physical 5570560: metadata leaf (level 0) in tree 5 BTRFS warning (device dm-4): header error at logical 5570560 on dev /dev/mapper/test-scratch1, physical 5570560: metadata leaf (level 0) in tree 5 BTRFS error (device dm-4): stripe 5570560 has unrepaired metadata sector at 5578752 BTRFS error (device dm-4): btrfs_scrub_dev(/dev/mapper/test-scratch1, 1, /dev/mapper/test-scratch2) failed -5 Signed-off-by: Qu Wenruo <wqu@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2023-04-06 07:26:29 +00:00
return ret;
}
static void raid56_scrub_wait_endio(struct bio *bio)
{
complete(bio->bi_private);
}
static int queue_scrub_stripe(struct scrub_ctx *sctx, struct btrfs_block_group *bg,
struct btrfs_device *dev, int mirror_num,
btrfs: scrub: fix grouping of read IO [REGRESSION] There are several regression reports about the scrub performance with v6.4 kernel. On a PCIe 3.0 device, the old v6.3 kernel can go 3GB/s scrub speed, but v6.4 can only go 1GB/s, an obvious 66% performance drop. [CAUSE] Iostat shows a very different behavior between v6.3 and v6.4 kernel: Device r/s rkB/s rrqm/s %rrqm r_await rareq-sz aqu-sz %util nvme0n1p3 9731.00 3425544.00 17237.00 63.92 2.18 352.02 21.18 100.00 nvme0n1p3 15578.00 993616.00 5.00 0.03 0.09 63.78 1.32 100.00 The upper one is v6.3 while the lower one is v6.4. There are several obvious differences: - Very few read merges This turns out to be a behavior change that we no longer do bio plug/unplug. - Very low aqu-sz This is due to the submit-and-wait behavior of flush_scrub_stripes(), and extra extent/csum tree search. Both behaviors are not that obvious on SATA SSDs, as SATA SSDs have NCQ to merge the reads, while SATA SSDs can not handle high queue depth well either. [FIX] For now this patch focuses on the read speed fix. Dev-replace replace speed needs more work. For the read part, we go two directions to fix the problems: - Re-introduce blk plug/unplug to merge read requests This is pretty simple, and the behavior is pretty easy to observe. This would enlarge the average read request size to 512K. - Introduce multi-group reads and no longer wait for each group Instead of the old behavior, which submits 8 stripes and waits for them, here we would enlarge the total number of stripes to 16 * 8. Which is 8M per device, the same limit as the old scrub in-flight bios size limit. Now every time we fill a group (8 stripes), we submit them and continue to next stripes. Only when the full 16 * 8 stripes are all filled, we submit the remaining ones (the last group), and wait for all groups to finish. Then submit the repair writes and dev-replace writes. This should enlarge the queue depth. This would greatly improve the merge rate (thus read block size) and queue depth: Before (with regression, and cached extent/csum path): Device r/s rkB/s rrqm/s %rrqm r_await rareq-sz aqu-sz %util nvme0n1p3 20666.00 1318240.00 10.00 0.05 0.08 63.79 1.63 100.00 After (with all patches applied): nvme0n1p3 5165.00 2278304.00 30557.00 85.54 0.55 441.10 2.81 100.00 i.e. 1287 to 2224 MB/s. CC: stable@vger.kernel.org # 6.4+ Signed-off-by: Qu Wenruo <wqu@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2023-08-03 06:33:31 +00:00
u64 logical, u32 length, u64 physical,
u64 *found_logical_ret)
{
struct scrub_stripe *stripe;
int ret;
btrfs: scrub: fix grouping of read IO [REGRESSION] There are several regression reports about the scrub performance with v6.4 kernel. On a PCIe 3.0 device, the old v6.3 kernel can go 3GB/s scrub speed, but v6.4 can only go 1GB/s, an obvious 66% performance drop. [CAUSE] Iostat shows a very different behavior between v6.3 and v6.4 kernel: Device r/s rkB/s rrqm/s %rrqm r_await rareq-sz aqu-sz %util nvme0n1p3 9731.00 3425544.00 17237.00 63.92 2.18 352.02 21.18 100.00 nvme0n1p3 15578.00 993616.00 5.00 0.03 0.09 63.78 1.32 100.00 The upper one is v6.3 while the lower one is v6.4. There are several obvious differences: - Very few read merges This turns out to be a behavior change that we no longer do bio plug/unplug. - Very low aqu-sz This is due to the submit-and-wait behavior of flush_scrub_stripes(), and extra extent/csum tree search. Both behaviors are not that obvious on SATA SSDs, as SATA SSDs have NCQ to merge the reads, while SATA SSDs can not handle high queue depth well either. [FIX] For now this patch focuses on the read speed fix. Dev-replace replace speed needs more work. For the read part, we go two directions to fix the problems: - Re-introduce blk plug/unplug to merge read requests This is pretty simple, and the behavior is pretty easy to observe. This would enlarge the average read request size to 512K. - Introduce multi-group reads and no longer wait for each group Instead of the old behavior, which submits 8 stripes and waits for them, here we would enlarge the total number of stripes to 16 * 8. Which is 8M per device, the same limit as the old scrub in-flight bios size limit. Now every time we fill a group (8 stripes), we submit them and continue to next stripes. Only when the full 16 * 8 stripes are all filled, we submit the remaining ones (the last group), and wait for all groups to finish. Then submit the repair writes and dev-replace writes. This should enlarge the queue depth. This would greatly improve the merge rate (thus read block size) and queue depth: Before (with regression, and cached extent/csum path): Device r/s rkB/s rrqm/s %rrqm r_await rareq-sz aqu-sz %util nvme0n1p3 20666.00 1318240.00 10.00 0.05 0.08 63.79 1.63 100.00 After (with all patches applied): nvme0n1p3 5165.00 2278304.00 30557.00 85.54 0.55 441.10 2.81 100.00 i.e. 1287 to 2224 MB/s. CC: stable@vger.kernel.org # 6.4+ Signed-off-by: Qu Wenruo <wqu@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2023-08-03 06:33:31 +00:00
/*
* There should always be one slot left, as caller filling the last
* slot should flush them all.
*/
ASSERT(sctx->cur_stripe < SCRUB_TOTAL_STRIPES);
stripe = &sctx->stripes[sctx->cur_stripe];
scrub_reset_stripe(stripe);
ret = scrub_find_fill_first_stripe(bg, &sctx->extent_path,
&sctx->csum_path, dev, physical,
mirror_num, logical, length, stripe);
/* Either >0 as no more extents or <0 for error. */
if (ret)
return ret;
btrfs: scrub: fix grouping of read IO [REGRESSION] There are several regression reports about the scrub performance with v6.4 kernel. On a PCIe 3.0 device, the old v6.3 kernel can go 3GB/s scrub speed, but v6.4 can only go 1GB/s, an obvious 66% performance drop. [CAUSE] Iostat shows a very different behavior between v6.3 and v6.4 kernel: Device r/s rkB/s rrqm/s %rrqm r_await rareq-sz aqu-sz %util nvme0n1p3 9731.00 3425544.00 17237.00 63.92 2.18 352.02 21.18 100.00 nvme0n1p3 15578.00 993616.00 5.00 0.03 0.09 63.78 1.32 100.00 The upper one is v6.3 while the lower one is v6.4. There are several obvious differences: - Very few read merges This turns out to be a behavior change that we no longer do bio plug/unplug. - Very low aqu-sz This is due to the submit-and-wait behavior of flush_scrub_stripes(), and extra extent/csum tree search. Both behaviors are not that obvious on SATA SSDs, as SATA SSDs have NCQ to merge the reads, while SATA SSDs can not handle high queue depth well either. [FIX] For now this patch focuses on the read speed fix. Dev-replace replace speed needs more work. For the read part, we go two directions to fix the problems: - Re-introduce blk plug/unplug to merge read requests This is pretty simple, and the behavior is pretty easy to observe. This would enlarge the average read request size to 512K. - Introduce multi-group reads and no longer wait for each group Instead of the old behavior, which submits 8 stripes and waits for them, here we would enlarge the total number of stripes to 16 * 8. Which is 8M per device, the same limit as the old scrub in-flight bios size limit. Now every time we fill a group (8 stripes), we submit them and continue to next stripes. Only when the full 16 * 8 stripes are all filled, we submit the remaining ones (the last group), and wait for all groups to finish. Then submit the repair writes and dev-replace writes. This should enlarge the queue depth. This would greatly improve the merge rate (thus read block size) and queue depth: Before (with regression, and cached extent/csum path): Device r/s rkB/s rrqm/s %rrqm r_await rareq-sz aqu-sz %util nvme0n1p3 20666.00 1318240.00 10.00 0.05 0.08 63.79 1.63 100.00 After (with all patches applied): nvme0n1p3 5165.00 2278304.00 30557.00 85.54 0.55 441.10 2.81 100.00 i.e. 1287 to 2224 MB/s. CC: stable@vger.kernel.org # 6.4+ Signed-off-by: Qu Wenruo <wqu@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2023-08-03 06:33:31 +00:00
if (found_logical_ret)
*found_logical_ret = stripe->logical;
sctx->cur_stripe++;
btrfs: scrub: fix grouping of read IO [REGRESSION] There are several regression reports about the scrub performance with v6.4 kernel. On a PCIe 3.0 device, the old v6.3 kernel can go 3GB/s scrub speed, but v6.4 can only go 1GB/s, an obvious 66% performance drop. [CAUSE] Iostat shows a very different behavior between v6.3 and v6.4 kernel: Device r/s rkB/s rrqm/s %rrqm r_await rareq-sz aqu-sz %util nvme0n1p3 9731.00 3425544.00 17237.00 63.92 2.18 352.02 21.18 100.00 nvme0n1p3 15578.00 993616.00 5.00 0.03 0.09 63.78 1.32 100.00 The upper one is v6.3 while the lower one is v6.4. There are several obvious differences: - Very few read merges This turns out to be a behavior change that we no longer do bio plug/unplug. - Very low aqu-sz This is due to the submit-and-wait behavior of flush_scrub_stripes(), and extra extent/csum tree search. Both behaviors are not that obvious on SATA SSDs, as SATA SSDs have NCQ to merge the reads, while SATA SSDs can not handle high queue depth well either. [FIX] For now this patch focuses on the read speed fix. Dev-replace replace speed needs more work. For the read part, we go two directions to fix the problems: - Re-introduce blk plug/unplug to merge read requests This is pretty simple, and the behavior is pretty easy to observe. This would enlarge the average read request size to 512K. - Introduce multi-group reads and no longer wait for each group Instead of the old behavior, which submits 8 stripes and waits for them, here we would enlarge the total number of stripes to 16 * 8. Which is 8M per device, the same limit as the old scrub in-flight bios size limit. Now every time we fill a group (8 stripes), we submit them and continue to next stripes. Only when the full 16 * 8 stripes are all filled, we submit the remaining ones (the last group), and wait for all groups to finish. Then submit the repair writes and dev-replace writes. This should enlarge the queue depth. This would greatly improve the merge rate (thus read block size) and queue depth: Before (with regression, and cached extent/csum path): Device r/s rkB/s rrqm/s %rrqm r_await rareq-sz aqu-sz %util nvme0n1p3 20666.00 1318240.00 10.00 0.05 0.08 63.79 1.63 100.00 After (with all patches applied): nvme0n1p3 5165.00 2278304.00 30557.00 85.54 0.55 441.10 2.81 100.00 i.e. 1287 to 2224 MB/s. CC: stable@vger.kernel.org # 6.4+ Signed-off-by: Qu Wenruo <wqu@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2023-08-03 06:33:31 +00:00
/* We filled one group, submit it. */
if (sctx->cur_stripe % SCRUB_STRIPES_PER_GROUP == 0) {
const int first_slot = sctx->cur_stripe - SCRUB_STRIPES_PER_GROUP;
submit_initial_group_read(sctx, first_slot, SCRUB_STRIPES_PER_GROUP);
}
/* Last slot used, flush them all. */
if (sctx->cur_stripe == SCRUB_TOTAL_STRIPES)
return flush_scrub_stripes(sctx);
return 0;
}
static int scrub_raid56_parity_stripe(struct scrub_ctx *sctx,
struct btrfs_device *scrub_dev,
struct btrfs_block_group *bg,
struct map_lookup *map,
u64 full_stripe_start)
{
DECLARE_COMPLETION_ONSTACK(io_done);
struct btrfs_fs_info *fs_info = sctx->fs_info;
struct btrfs_raid_bio *rbio;
struct btrfs_io_context *bioc = NULL;
struct btrfs_path extent_path = { 0 };
struct btrfs_path csum_path = { 0 };
struct bio *bio;
struct scrub_stripe *stripe;
bool all_empty = true;
const int data_stripes = nr_data_stripes(map);
unsigned long extent_bitmap = 0;
u64 length = btrfs_stripe_nr_to_offset(data_stripes);
int ret;
ASSERT(sctx->raid56_data_stripes);
/*
* For data stripe search, we cannot re-use the same extent/csum paths,
* as the data stripe bytenr may be smaller than previous extent. Thus
* we have to use our own extent/csum paths.
*/
extent_path.search_commit_root = 1;
extent_path.skip_locking = 1;
csum_path.search_commit_root = 1;
csum_path.skip_locking = 1;
for (int i = 0; i < data_stripes; i++) {
int stripe_index;
int rot;
u64 physical;
stripe = &sctx->raid56_data_stripes[i];
rot = div_u64(full_stripe_start - bg->start,
data_stripes) >> BTRFS_STRIPE_LEN_SHIFT;
stripe_index = (i + rot) % map->num_stripes;
physical = map->stripes[stripe_index].physical +
btrfs_stripe_nr_to_offset(rot);
scrub_reset_stripe(stripe);
set_bit(SCRUB_STRIPE_FLAG_NO_REPORT, &stripe->state);
ret = scrub_find_fill_first_stripe(bg, &extent_path, &csum_path,
map->stripes[stripe_index].dev, physical, 1,
full_stripe_start + btrfs_stripe_nr_to_offset(i),
BTRFS_STRIPE_LEN, stripe);
if (ret < 0)
goto out;
/*
* No extent in this data stripe, need to manually mark them
* initialized to make later read submission happy.
*/
if (ret > 0) {
stripe->logical = full_stripe_start +
btrfs_stripe_nr_to_offset(i);
stripe->dev = map->stripes[stripe_index].dev;
stripe->mirror_num = 1;
set_bit(SCRUB_STRIPE_FLAG_INITIALIZED, &stripe->state);
}
}
/* Check if all data stripes are empty. */
for (int i = 0; i < data_stripes; i++) {
stripe = &sctx->raid56_data_stripes[i];
if (!bitmap_empty(&stripe->extent_sector_bitmap, stripe->nr_sectors)) {
all_empty = false;
break;
}
}
if (all_empty) {
ret = 0;
goto out;
}
for (int i = 0; i < data_stripes; i++) {
stripe = &sctx->raid56_data_stripes[i];
scrub_submit_initial_read(sctx, stripe);
}
for (int i = 0; i < data_stripes; i++) {
stripe = &sctx->raid56_data_stripes[i];
wait_event(stripe->repair_wait,
test_bit(SCRUB_STRIPE_FLAG_REPAIR_DONE, &stripe->state));
}
/* For now, no zoned support for RAID56. */
ASSERT(!btrfs_is_zoned(sctx->fs_info));
/*
* Now all data stripes are properly verified. Check if we have any
* unrepaired, if so abort immediately or we could further corrupt the
* P/Q stripes.
*
* During the loop, also populate extent_bitmap.
*/
for (int i = 0; i < data_stripes; i++) {
unsigned long error;
stripe = &sctx->raid56_data_stripes[i];
/*
* We should only check the errors where there is an extent.
* As we may hit an empty data stripe while it's missing.
*/
bitmap_and(&error, &stripe->error_bitmap,
&stripe->extent_sector_bitmap, stripe->nr_sectors);
if (!bitmap_empty(&error, stripe->nr_sectors)) {
btrfs_err(fs_info,
"unrepaired sectors detected, full stripe %llu data stripe %u errors %*pbl",
full_stripe_start, i, stripe->nr_sectors,
&error);
ret = -EIO;
goto out;
}
bitmap_or(&extent_bitmap, &extent_bitmap,
&stripe->extent_sector_bitmap, stripe->nr_sectors);
}
/* Now we can check and regenerate the P/Q stripe. */
bio = bio_alloc(NULL, 1, REQ_OP_READ, GFP_NOFS);
bio->bi_iter.bi_sector = full_stripe_start >> SECTOR_SHIFT;
bio->bi_private = &io_done;
bio->bi_end_io = raid56_scrub_wait_endio;
btrfs_bio_counter_inc_blocked(fs_info);
ret = btrfs_map_block(fs_info, BTRFS_MAP_WRITE, full_stripe_start,
&length, &bioc, NULL, NULL);
if (ret < 0) {
btrfs_put_bioc(bioc);
btrfs_bio_counter_dec(fs_info);
goto out;
}
rbio = raid56_parity_alloc_scrub_rbio(bio, bioc, scrub_dev, &extent_bitmap,
BTRFS_STRIPE_LEN >> fs_info->sectorsize_bits);
btrfs_put_bioc(bioc);
if (!rbio) {
ret = -ENOMEM;
btrfs_bio_counter_dec(fs_info);
goto out;
}
btrfs: scrub: use recovered data stripes as cache to avoid unnecessary read For P/Q stripe scrub, we have quite some duplicated read IO: - Data stripes read for verification This is triggered by the scrub_submit_initial_read() inside scrub_raid56_parity_stripe(). - Data stripes read (again) for P/Q stripe verification This is triggered by scrub_assemble_read_bios() from scrub_rbio(). Although we can have hit rbio cache and avoid unnecessary read, the chance is very low, as scrub would easily flush the whole rbio cache. This means, even we're just scrubbing a single P/Q stripe, we would read the data stripes twice for the best case scenario. If we need to recover some data stripes, it would cause more reads on the same data stripes, again and again. However before we call raid56_parity_submit_scrub_rbio() we already have all data stripes repaired and their contents ready to use. But RAID56 cache is unaware about the scrub cache, thus RAID56 layer itself still needs to re-read the data stripes. To avoid such cache miss, this patch would: - Introduce a new helper, raid56_parity_cache_data_pages() This function would grab the pages from an array, and copy the content to the rbio, marking all the involved sectors uptodate. The page copy is unavoidable because of the cache pages of rbio are all self managed, thus can not utilize outside pages without screwing up the lifespan. - Use the repaired data stripes as cache inside scrub_raid56_parity_stripe() By this, we ensure all the data sectors of the scrub rbio are already uptodate, and no need to read them again from disk. Signed-off-by: Qu Wenruo <wqu@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2023-04-13 05:57:18 +00:00
/* Use the recovered stripes as cache to avoid read them from disk again. */
for (int i = 0; i < data_stripes; i++) {
stripe = &sctx->raid56_data_stripes[i];
raid56_parity_cache_data_pages(rbio, stripe->pages,
full_stripe_start + (i << BTRFS_STRIPE_LEN_SHIFT));
}
raid56_parity_submit_scrub_rbio(rbio);
wait_for_completion_io(&io_done);
ret = blk_status_to_errno(bio->bi_status);
bio_put(bio);
btrfs_bio_counter_dec(fs_info);
btrfs_release_path(&extent_path);
btrfs_release_path(&csum_path);
out:
return ret;
}
/*
* Scrub one range which can only has simple mirror based profile.
* (Including all range in SINGLE/DUP/RAID1/RAID1C*, and each stripe in
* RAID0/RAID10).
*
* Since we may need to handle a subset of block group, we need @logical_start
* and @logical_length parameter.
*/
static int scrub_simple_mirror(struct scrub_ctx *sctx,
struct btrfs_block_group *bg,
struct map_lookup *map,
u64 logical_start, u64 logical_length,
struct btrfs_device *device,
u64 physical, int mirror_num)
{
struct btrfs_fs_info *fs_info = sctx->fs_info;
const u64 logical_end = logical_start + logical_length;
u64 cur_logical = logical_start;
int ret;
/* The range must be inside the bg */
ASSERT(logical_start >= bg->start && logical_end <= bg->start + bg->length);
/* Go through each extent items inside the logical range */
while (cur_logical < logical_end) {
btrfs: scrub: fix grouping of read IO [REGRESSION] There are several regression reports about the scrub performance with v6.4 kernel. On a PCIe 3.0 device, the old v6.3 kernel can go 3GB/s scrub speed, but v6.4 can only go 1GB/s, an obvious 66% performance drop. [CAUSE] Iostat shows a very different behavior between v6.3 and v6.4 kernel: Device r/s rkB/s rrqm/s %rrqm r_await rareq-sz aqu-sz %util nvme0n1p3 9731.00 3425544.00 17237.00 63.92 2.18 352.02 21.18 100.00 nvme0n1p3 15578.00 993616.00 5.00 0.03 0.09 63.78 1.32 100.00 The upper one is v6.3 while the lower one is v6.4. There are several obvious differences: - Very few read merges This turns out to be a behavior change that we no longer do bio plug/unplug. - Very low aqu-sz This is due to the submit-and-wait behavior of flush_scrub_stripes(), and extra extent/csum tree search. Both behaviors are not that obvious on SATA SSDs, as SATA SSDs have NCQ to merge the reads, while SATA SSDs can not handle high queue depth well either. [FIX] For now this patch focuses on the read speed fix. Dev-replace replace speed needs more work. For the read part, we go two directions to fix the problems: - Re-introduce blk plug/unplug to merge read requests This is pretty simple, and the behavior is pretty easy to observe. This would enlarge the average read request size to 512K. - Introduce multi-group reads and no longer wait for each group Instead of the old behavior, which submits 8 stripes and waits for them, here we would enlarge the total number of stripes to 16 * 8. Which is 8M per device, the same limit as the old scrub in-flight bios size limit. Now every time we fill a group (8 stripes), we submit them and continue to next stripes. Only when the full 16 * 8 stripes are all filled, we submit the remaining ones (the last group), and wait for all groups to finish. Then submit the repair writes and dev-replace writes. This should enlarge the queue depth. This would greatly improve the merge rate (thus read block size) and queue depth: Before (with regression, and cached extent/csum path): Device r/s rkB/s rrqm/s %rrqm r_await rareq-sz aqu-sz %util nvme0n1p3 20666.00 1318240.00 10.00 0.05 0.08 63.79 1.63 100.00 After (with all patches applied): nvme0n1p3 5165.00 2278304.00 30557.00 85.54 0.55 441.10 2.81 100.00 i.e. 1287 to 2224 MB/s. CC: stable@vger.kernel.org # 6.4+ Signed-off-by: Qu Wenruo <wqu@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2023-08-03 06:33:31 +00:00
u64 found_logical;
u64 cur_physical = physical + cur_logical - logical_start;
/* Canceled? */
if (atomic_read(&fs_info->scrub_cancel_req) ||
atomic_read(&sctx->cancel_req)) {
ret = -ECANCELED;
break;
}
/* Paused? */
if (atomic_read(&fs_info->scrub_pause_req)) {
/* Push queued extents */
scrub_blocked_if_needed(fs_info);
}
/* Block group removed? */
spin_lock(&bg->lock);
if (test_bit(BLOCK_GROUP_FLAG_REMOVED, &bg->runtime_flags)) {
spin_unlock(&bg->lock);
ret = 0;
break;
}
spin_unlock(&bg->lock);
ret = queue_scrub_stripe(sctx, bg, device, mirror_num,
cur_logical, logical_end - cur_logical,
btrfs: scrub: fix grouping of read IO [REGRESSION] There are several regression reports about the scrub performance with v6.4 kernel. On a PCIe 3.0 device, the old v6.3 kernel can go 3GB/s scrub speed, but v6.4 can only go 1GB/s, an obvious 66% performance drop. [CAUSE] Iostat shows a very different behavior between v6.3 and v6.4 kernel: Device r/s rkB/s rrqm/s %rrqm r_await rareq-sz aqu-sz %util nvme0n1p3 9731.00 3425544.00 17237.00 63.92 2.18 352.02 21.18 100.00 nvme0n1p3 15578.00 993616.00 5.00 0.03 0.09 63.78 1.32 100.00 The upper one is v6.3 while the lower one is v6.4. There are several obvious differences: - Very few read merges This turns out to be a behavior change that we no longer do bio plug/unplug. - Very low aqu-sz This is due to the submit-and-wait behavior of flush_scrub_stripes(), and extra extent/csum tree search. Both behaviors are not that obvious on SATA SSDs, as SATA SSDs have NCQ to merge the reads, while SATA SSDs can not handle high queue depth well either. [FIX] For now this patch focuses on the read speed fix. Dev-replace replace speed needs more work. For the read part, we go two directions to fix the problems: - Re-introduce blk plug/unplug to merge read requests This is pretty simple, and the behavior is pretty easy to observe. This would enlarge the average read request size to 512K. - Introduce multi-group reads and no longer wait for each group Instead of the old behavior, which submits 8 stripes and waits for them, here we would enlarge the total number of stripes to 16 * 8. Which is 8M per device, the same limit as the old scrub in-flight bios size limit. Now every time we fill a group (8 stripes), we submit them and continue to next stripes. Only when the full 16 * 8 stripes are all filled, we submit the remaining ones (the last group), and wait for all groups to finish. Then submit the repair writes and dev-replace writes. This should enlarge the queue depth. This would greatly improve the merge rate (thus read block size) and queue depth: Before (with regression, and cached extent/csum path): Device r/s rkB/s rrqm/s %rrqm r_await rareq-sz aqu-sz %util nvme0n1p3 20666.00 1318240.00 10.00 0.05 0.08 63.79 1.63 100.00 After (with all patches applied): nvme0n1p3 5165.00 2278304.00 30557.00 85.54 0.55 441.10 2.81 100.00 i.e. 1287 to 2224 MB/s. CC: stable@vger.kernel.org # 6.4+ Signed-off-by: Qu Wenruo <wqu@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2023-08-03 06:33:31 +00:00
cur_physical, &found_logical);
if (ret > 0) {
/* No more extent, just update the accounting */
sctx->stat.last_physical = physical + logical_length;
ret = 0;
break;
}
if (ret < 0)
break;
btrfs: scrub: fix grouping of read IO [REGRESSION] There are several regression reports about the scrub performance with v6.4 kernel. On a PCIe 3.0 device, the old v6.3 kernel can go 3GB/s scrub speed, but v6.4 can only go 1GB/s, an obvious 66% performance drop. [CAUSE] Iostat shows a very different behavior between v6.3 and v6.4 kernel: Device r/s rkB/s rrqm/s %rrqm r_await rareq-sz aqu-sz %util nvme0n1p3 9731.00 3425544.00 17237.00 63.92 2.18 352.02 21.18 100.00 nvme0n1p3 15578.00 993616.00 5.00 0.03 0.09 63.78 1.32 100.00 The upper one is v6.3 while the lower one is v6.4. There are several obvious differences: - Very few read merges This turns out to be a behavior change that we no longer do bio plug/unplug. - Very low aqu-sz This is due to the submit-and-wait behavior of flush_scrub_stripes(), and extra extent/csum tree search. Both behaviors are not that obvious on SATA SSDs, as SATA SSDs have NCQ to merge the reads, while SATA SSDs can not handle high queue depth well either. [FIX] For now this patch focuses on the read speed fix. Dev-replace replace speed needs more work. For the read part, we go two directions to fix the problems: - Re-introduce blk plug/unplug to merge read requests This is pretty simple, and the behavior is pretty easy to observe. This would enlarge the average read request size to 512K. - Introduce multi-group reads and no longer wait for each group Instead of the old behavior, which submits 8 stripes and waits for them, here we would enlarge the total number of stripes to 16 * 8. Which is 8M per device, the same limit as the old scrub in-flight bios size limit. Now every time we fill a group (8 stripes), we submit them and continue to next stripes. Only when the full 16 * 8 stripes are all filled, we submit the remaining ones (the last group), and wait for all groups to finish. Then submit the repair writes and dev-replace writes. This should enlarge the queue depth. This would greatly improve the merge rate (thus read block size) and queue depth: Before (with regression, and cached extent/csum path): Device r/s rkB/s rrqm/s %rrqm r_await rareq-sz aqu-sz %util nvme0n1p3 20666.00 1318240.00 10.00 0.05 0.08 63.79 1.63 100.00 After (with all patches applied): nvme0n1p3 5165.00 2278304.00 30557.00 85.54 0.55 441.10 2.81 100.00 i.e. 1287 to 2224 MB/s. CC: stable@vger.kernel.org # 6.4+ Signed-off-by: Qu Wenruo <wqu@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2023-08-03 06:33:31 +00:00
cur_logical = found_logical + BTRFS_STRIPE_LEN;
/* Don't hold CPU for too long time */
cond_resched();
}
return ret;
}
/* Calculate the full stripe length for simple stripe based profiles */
static u64 simple_stripe_full_stripe_len(const struct map_lookup *map)
{
ASSERT(map->type & (BTRFS_BLOCK_GROUP_RAID0 |
BTRFS_BLOCK_GROUP_RAID10));
return btrfs_stripe_nr_to_offset(map->num_stripes / map->sub_stripes);
}
/* Get the logical bytenr for the stripe */
static u64 simple_stripe_get_logical(struct map_lookup *map,
struct btrfs_block_group *bg,
int stripe_index)
{
ASSERT(map->type & (BTRFS_BLOCK_GROUP_RAID0 |
BTRFS_BLOCK_GROUP_RAID10));
ASSERT(stripe_index < map->num_stripes);
/*
* (stripe_index / sub_stripes) gives how many data stripes we need to
* skip.
*/
return btrfs_stripe_nr_to_offset(stripe_index / map->sub_stripes) +
bg->start;
}
/* Get the mirror number for the stripe */
static int simple_stripe_mirror_num(struct map_lookup *map, int stripe_index)
{
ASSERT(map->type & (BTRFS_BLOCK_GROUP_RAID0 |
BTRFS_BLOCK_GROUP_RAID10));
ASSERT(stripe_index < map->num_stripes);
/* For RAID0, it's fixed to 1, for RAID10 it's 0,1,0,1... */
return stripe_index % map->sub_stripes + 1;
}
static int scrub_simple_stripe(struct scrub_ctx *sctx,
struct btrfs_block_group *bg,
struct map_lookup *map,
struct btrfs_device *device,
int stripe_index)
{
const u64 logical_increment = simple_stripe_full_stripe_len(map);
const u64 orig_logical = simple_stripe_get_logical(map, bg, stripe_index);
const u64 orig_physical = map->stripes[stripe_index].physical;
const int mirror_num = simple_stripe_mirror_num(map, stripe_index);
u64 cur_logical = orig_logical;
u64 cur_physical = orig_physical;
int ret = 0;
while (cur_logical < bg->start + bg->length) {
/*
* Inside each stripe, RAID0 is just SINGLE, and RAID10 is
* just RAID1, so we can reuse scrub_simple_mirror() to scrub
* this stripe.
*/
ret = scrub_simple_mirror(sctx, bg, map, cur_logical,
BTRFS_STRIPE_LEN, device, cur_physical,
mirror_num);
if (ret)
return ret;
/* Skip to next stripe which belongs to the target device */
cur_logical += logical_increment;
/* For physical offset, we just go to next stripe */
cur_physical += BTRFS_STRIPE_LEN;
}
return ret;
}
Btrfs: rename the scrub context structure The device replace procedure makes use of the scrub code. The scrub code is the most efficient code to read the allocated data of a disk, i.e. it reads sequentially in order to avoid disk head movements, it skips unallocated blocks, it uses read ahead mechanisms, and it contains all the code to detect and repair defects. This commit is a first preparation step to adapt the scrub code to be shareable for the device replace procedure. The block device will be removed from the scrub context state structure in a later step. It used to be the source block device. The scrub code as it is used for the device replace procedure reads the source data from whereever it is optimal. The source device might even be gone (disconnected, for instance due to a hardware failure). Or the drive can be so faulty so that the device replace procedure tries to avoid access to the faulty source drive as much as possible, and only if all other mirrors are damaged, as a last resort, the source disk is accessed. The modified scrub code operates as if it would handle the source drive and thereby generates an exact copy of the source disk on the target disk, even if the source disk is not present at all. Therefore the block device pointer to the source disk is removed in a later patch, and therefore the context structure is renamed (this is the goal of the current patch) to reflect that no source block device scope is there anymore. Summary: This first preparation step consists of a textual substitution of the term "dev" to the term "ctx" whereever the scrub context is used. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-02 08:58:09 +00:00
static noinline_for_stack int scrub_stripe(struct scrub_ctx *sctx,
struct btrfs_block_group *bg,
struct extent_map *em,
struct btrfs_device *scrub_dev,
int stripe_index)
{
struct btrfs_fs_info *fs_info = sctx->fs_info;
struct map_lookup *map = em->map_lookup;
const u64 profile = map->type & BTRFS_BLOCK_GROUP_PROFILE_MASK;
const u64 chunk_logical = bg->start;
int ret;
btrfs: dev-replace: error out if we have unrepaired metadata error during [BUG] Even before the scrub rework, if we have some corrupted metadata failed to be repaired during replace, we still continue replacing and let it finish just as there is nothing wrong: BTRFS info (device dm-4): dev_replace from /dev/mapper/test-scratch1 (devid 1) to /dev/mapper/test-scratch2 started BTRFS warning (device dm-4): tree block 5578752 mirror 1 has bad csum, has 0x00000000 want 0xade80ca1 BTRFS warning (device dm-4): tree block 5578752 mirror 0 has bad csum, has 0x00000000 want 0xade80ca1 BTRFS warning (device dm-4): checksum error at logical 5578752 on dev /dev/mapper/test-scratch1, physical 5578752: metadata leaf (level 0) in tree 5 BTRFS warning (device dm-4): checksum error at logical 5578752 on dev /dev/mapper/test-scratch1, physical 5578752: metadata leaf (level 0) in tree 5 BTRFS error (device dm-4): bdev /dev/mapper/test-scratch1 errs: wr 0, rd 0, flush 0, corrupt 1, gen 0 BTRFS warning (device dm-4): tree block 5578752 mirror 1 has bad bytenr, has 0 want 5578752 BTRFS error (device dm-4): unable to fixup (regular) error at logical 5578752 on dev /dev/mapper/test-scratch1 BTRFS info (device dm-4): dev_replace from /dev/mapper/test-scratch1 (devid 1) to /dev/mapper/test-scratch2 finished This can lead to unexpected problems for the resulting filesystem. [CAUSE] Btrfs reuses scrub code path for dev-replace to iterate all dev extents. But unlike scrub, dev-replace doesn't really bother to check the scrub progress, which records all the errors found during replace. And even if we check the progress, we cannot really determine which errors are minor, which are critical just by the plain numbers. (remember we don't treat metadata/data checksum error differently). This behavior is there from the very beginning. [FIX] Instead of continuing the replace, just error out if we hit an unrepaired metadata sector. Now the dev-replace would be rejected with -EIO, to let the user know. Although it also means, the filesystem has some metadata error which cannot be repaired, the user would be upset anyway. The new dmesg would look like this: BTRFS info (device dm-4): dev_replace from /dev/mapper/test-scratch1 (devid 1) to /dev/mapper/test-scratch2 started BTRFS warning (device dm-4): tree block 5578752 mirror 1 has bad csum, has 0x00000000 want 0xade80ca1 BTRFS warning (device dm-4): tree block 5578752 mirror 1 has bad csum, has 0x00000000 want 0xade80ca1 BTRFS error (device dm-4): unable to fixup (regular) error at logical 5570560 on dev /dev/mapper/test-scratch1 physical 5570560 BTRFS warning (device dm-4): header error at logical 5570560 on dev /dev/mapper/test-scratch1, physical 5570560: metadata leaf (level 0) in tree 5 BTRFS warning (device dm-4): header error at logical 5570560 on dev /dev/mapper/test-scratch1, physical 5570560: metadata leaf (level 0) in tree 5 BTRFS error (device dm-4): stripe 5570560 has unrepaired metadata sector at 5578752 BTRFS error (device dm-4): btrfs_scrub_dev(/dev/mapper/test-scratch1, 1, /dev/mapper/test-scratch2) failed -5 Signed-off-by: Qu Wenruo <wqu@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2023-04-06 07:26:29 +00:00
int ret2;
u64 physical = map->stripes[stripe_index].physical;
const u64 dev_stripe_len = btrfs_calc_stripe_length(em);
const u64 physical_end = physical + dev_stripe_len;
u64 logical;
u64 logic_end;
/* The logical increment after finishing one stripe */
u64 increment;
/* Offset inside the chunk */
u64 offset;
2014-11-06 09:20:58 +00:00
u64 stripe_logical;
int stop_loop = 0;
/* Extent_path should be released by now. */
ASSERT(sctx->extent_path.nodes[0] == NULL);
scrub_blocked_if_needed(fs_info);
if (sctx->is_dev_replace &&
btrfs_dev_is_sequential(sctx->wr_tgtdev, physical)) {
mutex_lock(&sctx->wr_lock);
sctx->write_pointer = physical;
mutex_unlock(&sctx->wr_lock);
}
/* Prepare the extra data stripes used by RAID56. */
if (profile & BTRFS_BLOCK_GROUP_RAID56_MASK) {
ASSERT(sctx->raid56_data_stripes == NULL);
sctx->raid56_data_stripes = kcalloc(nr_data_stripes(map),
sizeof(struct scrub_stripe),
GFP_KERNEL);
if (!sctx->raid56_data_stripes) {
ret = -ENOMEM;
goto out;
}
for (int i = 0; i < nr_data_stripes(map); i++) {
ret = init_scrub_stripe(fs_info,
&sctx->raid56_data_stripes[i]);
if (ret < 0)
goto out;
sctx->raid56_data_stripes[i].bg = bg;
sctx->raid56_data_stripes[i].sctx = sctx;
}
}
/*
* There used to be a big double loop to handle all profiles using the
* same routine, which grows larger and more gross over time.
*
* So here we handle each profile differently, so simpler profiles
* have simpler scrubbing function.
*/
if (!(profile & (BTRFS_BLOCK_GROUP_RAID0 | BTRFS_BLOCK_GROUP_RAID10 |
BTRFS_BLOCK_GROUP_RAID56_MASK))) {
/*
* Above check rules out all complex profile, the remaining
* profiles are SINGLE|DUP|RAID1|RAID1C*, which is simple
* mirrored duplication without stripe.
*
* Only @physical and @mirror_num needs to calculated using
* @stripe_index.
*/
ret = scrub_simple_mirror(sctx, bg, map, bg->start, bg->length,
scrub_dev, map->stripes[stripe_index].physical,
stripe_index + 1);
offset = 0;
goto out;
}
if (profile & (BTRFS_BLOCK_GROUP_RAID0 | BTRFS_BLOCK_GROUP_RAID10)) {
ret = scrub_simple_stripe(sctx, bg, map, scrub_dev, stripe_index);
offset = btrfs_stripe_nr_to_offset(stripe_index / map->sub_stripes);
goto out;
}
/* Only RAID56 goes through the old code */
ASSERT(map->type & BTRFS_BLOCK_GROUP_RAID56_MASK);
ret = 0;
/* Calculate the logical end of the stripe */
get_raid56_logic_offset(physical_end, stripe_index,
map, &logic_end, NULL);
logic_end += chunk_logical;
/* Initialize @offset in case we need to go to out: label */
get_raid56_logic_offset(physical, stripe_index, map, &offset, NULL);
increment = btrfs_stripe_nr_to_offset(nr_data_stripes(map));
/*
* Due to the rotation, for RAID56 it's better to iterate each stripe
* using their physical offset.
*/
while (physical < physical_end) {
ret = get_raid56_logic_offset(physical, stripe_index, map,
&logical, &stripe_logical);
logical += chunk_logical;
if (ret) {
/* it is parity strip */
stripe_logical += chunk_logical;
ret = scrub_raid56_parity_stripe(sctx, scrub_dev, bg,
map, stripe_logical);
if (ret)
goto out;
goto next;
}
/*
* Now we're at a data stripe, scrub each extents in the range.
*
* At this stage, if we ignore the repair part, inside each data
* stripe it is no different than SINGLE profile.
* We can reuse scrub_simple_mirror() here, as the repair part
* is still based on @mirror_num.
*/
ret = scrub_simple_mirror(sctx, bg, map, logical, BTRFS_STRIPE_LEN,
scrub_dev, physical, 1);
if (ret < 0)
goto out;
next:
logical += increment;
physical += BTRFS_STRIPE_LEN;
Btrfs: rename the scrub context structure The device replace procedure makes use of the scrub code. The scrub code is the most efficient code to read the allocated data of a disk, i.e. it reads sequentially in order to avoid disk head movements, it skips unallocated blocks, it uses read ahead mechanisms, and it contains all the code to detect and repair defects. This commit is a first preparation step to adapt the scrub code to be shareable for the device replace procedure. The block device will be removed from the scrub context state structure in a later step. It used to be the source block device. The scrub code as it is used for the device replace procedure reads the source data from whereever it is optimal. The source device might even be gone (disconnected, for instance due to a hardware failure). Or the drive can be so faulty so that the device replace procedure tries to avoid access to the faulty source drive as much as possible, and only if all other mirrors are damaged, as a last resort, the source disk is accessed. The modified scrub code operates as if it would handle the source drive and thereby generates an exact copy of the source disk on the target disk, even if the source disk is not present at all. Therefore the block device pointer to the source disk is removed in a later patch, and therefore the context structure is renamed (this is the goal of the current patch) to reflect that no source block device scope is there anymore. Summary: This first preparation step consists of a textual substitution of the term "dev" to the term "ctx" whereever the scrub context is used. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-02 08:58:09 +00:00
spin_lock(&sctx->stat_lock);
if (stop_loop)
sctx->stat.last_physical =
map->stripes[stripe_index].physical + dev_stripe_len;
else
sctx->stat.last_physical = physical;
Btrfs: rename the scrub context structure The device replace procedure makes use of the scrub code. The scrub code is the most efficient code to read the allocated data of a disk, i.e. it reads sequentially in order to avoid disk head movements, it skips unallocated blocks, it uses read ahead mechanisms, and it contains all the code to detect and repair defects. This commit is a first preparation step to adapt the scrub code to be shareable for the device replace procedure. The block device will be removed from the scrub context state structure in a later step. It used to be the source block device. The scrub code as it is used for the device replace procedure reads the source data from whereever it is optimal. The source device might even be gone (disconnected, for instance due to a hardware failure). Or the drive can be so faulty so that the device replace procedure tries to avoid access to the faulty source drive as much as possible, and only if all other mirrors are damaged, as a last resort, the source disk is accessed. The modified scrub code operates as if it would handle the source drive and thereby generates an exact copy of the source disk on the target disk, even if the source disk is not present at all. Therefore the block device pointer to the source disk is removed in a later patch, and therefore the context structure is renamed (this is the goal of the current patch) to reflect that no source block device scope is there anymore. Summary: This first preparation step consists of a textual substitution of the term "dev" to the term "ctx" whereever the scrub context is used. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-02 08:58:09 +00:00
spin_unlock(&sctx->stat_lock);
if (stop_loop)
break;
}
out:
btrfs: dev-replace: error out if we have unrepaired metadata error during [BUG] Even before the scrub rework, if we have some corrupted metadata failed to be repaired during replace, we still continue replacing and let it finish just as there is nothing wrong: BTRFS info (device dm-4): dev_replace from /dev/mapper/test-scratch1 (devid 1) to /dev/mapper/test-scratch2 started BTRFS warning (device dm-4): tree block 5578752 mirror 1 has bad csum, has 0x00000000 want 0xade80ca1 BTRFS warning (device dm-4): tree block 5578752 mirror 0 has bad csum, has 0x00000000 want 0xade80ca1 BTRFS warning (device dm-4): checksum error at logical 5578752 on dev /dev/mapper/test-scratch1, physical 5578752: metadata leaf (level 0) in tree 5 BTRFS warning (device dm-4): checksum error at logical 5578752 on dev /dev/mapper/test-scratch1, physical 5578752: metadata leaf (level 0) in tree 5 BTRFS error (device dm-4): bdev /dev/mapper/test-scratch1 errs: wr 0, rd 0, flush 0, corrupt 1, gen 0 BTRFS warning (device dm-4): tree block 5578752 mirror 1 has bad bytenr, has 0 want 5578752 BTRFS error (device dm-4): unable to fixup (regular) error at logical 5578752 on dev /dev/mapper/test-scratch1 BTRFS info (device dm-4): dev_replace from /dev/mapper/test-scratch1 (devid 1) to /dev/mapper/test-scratch2 finished This can lead to unexpected problems for the resulting filesystem. [CAUSE] Btrfs reuses scrub code path for dev-replace to iterate all dev extents. But unlike scrub, dev-replace doesn't really bother to check the scrub progress, which records all the errors found during replace. And even if we check the progress, we cannot really determine which errors are minor, which are critical just by the plain numbers. (remember we don't treat metadata/data checksum error differently). This behavior is there from the very beginning. [FIX] Instead of continuing the replace, just error out if we hit an unrepaired metadata sector. Now the dev-replace would be rejected with -EIO, to let the user know. Although it also means, the filesystem has some metadata error which cannot be repaired, the user would be upset anyway. The new dmesg would look like this: BTRFS info (device dm-4): dev_replace from /dev/mapper/test-scratch1 (devid 1) to /dev/mapper/test-scratch2 started BTRFS warning (device dm-4): tree block 5578752 mirror 1 has bad csum, has 0x00000000 want 0xade80ca1 BTRFS warning (device dm-4): tree block 5578752 mirror 1 has bad csum, has 0x00000000 want 0xade80ca1 BTRFS error (device dm-4): unable to fixup (regular) error at logical 5570560 on dev /dev/mapper/test-scratch1 physical 5570560 BTRFS warning (device dm-4): header error at logical 5570560 on dev /dev/mapper/test-scratch1, physical 5570560: metadata leaf (level 0) in tree 5 BTRFS warning (device dm-4): header error at logical 5570560 on dev /dev/mapper/test-scratch1, physical 5570560: metadata leaf (level 0) in tree 5 BTRFS error (device dm-4): stripe 5570560 has unrepaired metadata sector at 5578752 BTRFS error (device dm-4): btrfs_scrub_dev(/dev/mapper/test-scratch1, 1, /dev/mapper/test-scratch2) failed -5 Signed-off-by: Qu Wenruo <wqu@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2023-04-06 07:26:29 +00:00
ret2 = flush_scrub_stripes(sctx);
if (!ret)
btrfs: dev-replace: error out if we have unrepaired metadata error during [BUG] Even before the scrub rework, if we have some corrupted metadata failed to be repaired during replace, we still continue replacing and let it finish just as there is nothing wrong: BTRFS info (device dm-4): dev_replace from /dev/mapper/test-scratch1 (devid 1) to /dev/mapper/test-scratch2 started BTRFS warning (device dm-4): tree block 5578752 mirror 1 has bad csum, has 0x00000000 want 0xade80ca1 BTRFS warning (device dm-4): tree block 5578752 mirror 0 has bad csum, has 0x00000000 want 0xade80ca1 BTRFS warning (device dm-4): checksum error at logical 5578752 on dev /dev/mapper/test-scratch1, physical 5578752: metadata leaf (level 0) in tree 5 BTRFS warning (device dm-4): checksum error at logical 5578752 on dev /dev/mapper/test-scratch1, physical 5578752: metadata leaf (level 0) in tree 5 BTRFS error (device dm-4): bdev /dev/mapper/test-scratch1 errs: wr 0, rd 0, flush 0, corrupt 1, gen 0 BTRFS warning (device dm-4): tree block 5578752 mirror 1 has bad bytenr, has 0 want 5578752 BTRFS error (device dm-4): unable to fixup (regular) error at logical 5578752 on dev /dev/mapper/test-scratch1 BTRFS info (device dm-4): dev_replace from /dev/mapper/test-scratch1 (devid 1) to /dev/mapper/test-scratch2 finished This can lead to unexpected problems for the resulting filesystem. [CAUSE] Btrfs reuses scrub code path for dev-replace to iterate all dev extents. But unlike scrub, dev-replace doesn't really bother to check the scrub progress, which records all the errors found during replace. And even if we check the progress, we cannot really determine which errors are minor, which are critical just by the plain numbers. (remember we don't treat metadata/data checksum error differently). This behavior is there from the very beginning. [FIX] Instead of continuing the replace, just error out if we hit an unrepaired metadata sector. Now the dev-replace would be rejected with -EIO, to let the user know. Although it also means, the filesystem has some metadata error which cannot be repaired, the user would be upset anyway. The new dmesg would look like this: BTRFS info (device dm-4): dev_replace from /dev/mapper/test-scratch1 (devid 1) to /dev/mapper/test-scratch2 started BTRFS warning (device dm-4): tree block 5578752 mirror 1 has bad csum, has 0x00000000 want 0xade80ca1 BTRFS warning (device dm-4): tree block 5578752 mirror 1 has bad csum, has 0x00000000 want 0xade80ca1 BTRFS error (device dm-4): unable to fixup (regular) error at logical 5570560 on dev /dev/mapper/test-scratch1 physical 5570560 BTRFS warning (device dm-4): header error at logical 5570560 on dev /dev/mapper/test-scratch1, physical 5570560: metadata leaf (level 0) in tree 5 BTRFS warning (device dm-4): header error at logical 5570560 on dev /dev/mapper/test-scratch1, physical 5570560: metadata leaf (level 0) in tree 5 BTRFS error (device dm-4): stripe 5570560 has unrepaired metadata sector at 5578752 BTRFS error (device dm-4): btrfs_scrub_dev(/dev/mapper/test-scratch1, 1, /dev/mapper/test-scratch2) failed -5 Signed-off-by: Qu Wenruo <wqu@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2023-04-06 07:26:29 +00:00
ret = ret2;
btrfs_release_path(&sctx->extent_path);
btrfs_release_path(&sctx->csum_path);
if (sctx->raid56_data_stripes) {
for (int i = 0; i < nr_data_stripes(map); i++)
release_scrub_stripe(&sctx->raid56_data_stripes[i]);
kfree(sctx->raid56_data_stripes);
sctx->raid56_data_stripes = NULL;
}
if (sctx->is_dev_replace && ret >= 0) {
int ret2;
ret2 = sync_write_pointer_for_zoned(sctx,
chunk_logical + offset,
map->stripes[stripe_index].physical,
physical_end);
if (ret2)
ret = ret2;
}
return ret < 0 ? ret : 0;
}
Btrfs: rename the scrub context structure The device replace procedure makes use of the scrub code. The scrub code is the most efficient code to read the allocated data of a disk, i.e. it reads sequentially in order to avoid disk head movements, it skips unallocated blocks, it uses read ahead mechanisms, and it contains all the code to detect and repair defects. This commit is a first preparation step to adapt the scrub code to be shareable for the device replace procedure. The block device will be removed from the scrub context state structure in a later step. It used to be the source block device. The scrub code as it is used for the device replace procedure reads the source data from whereever it is optimal. The source device might even be gone (disconnected, for instance due to a hardware failure). Or the drive can be so faulty so that the device replace procedure tries to avoid access to the faulty source drive as much as possible, and only if all other mirrors are damaged, as a last resort, the source disk is accessed. The modified scrub code operates as if it would handle the source drive and thereby generates an exact copy of the source disk on the target disk, even if the source disk is not present at all. Therefore the block device pointer to the source disk is removed in a later patch, and therefore the context structure is renamed (this is the goal of the current patch) to reflect that no source block device scope is there anymore. Summary: This first preparation step consists of a textual substitution of the term "dev" to the term "ctx" whereever the scrub context is used. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-02 08:58:09 +00:00
static noinline_for_stack int scrub_chunk(struct scrub_ctx *sctx,
struct btrfs_block_group *bg,
struct btrfs_device *scrub_dev,
u64 dev_offset,
u64 dev_extent_len)
{
struct btrfs_fs_info *fs_info = sctx->fs_info;
struct extent_map_tree *map_tree = &fs_info->mapping_tree;
struct map_lookup *map;
struct extent_map *em;
int i;
int ret = 0;
read_lock(&map_tree->lock);
em = lookup_extent_mapping(map_tree, bg->start, bg->length);
read_unlock(&map_tree->lock);
if (!em) {
/*
* Might have been an unused block group deleted by the cleaner
* kthread or relocation.
*/
spin_lock(&bg->lock);
if (!test_bit(BLOCK_GROUP_FLAG_REMOVED, &bg->runtime_flags))
ret = -EINVAL;
spin_unlock(&bg->lock);
return ret;
}
if (em->start != bg->start)
goto out;
if (em->len < dev_extent_len)
goto out;
map = em->map_lookup;
for (i = 0; i < map->num_stripes; ++i) {
if (map->stripes[i].dev->bdev == scrub_dev->bdev &&
map->stripes[i].physical == dev_offset) {
ret = scrub_stripe(sctx, bg, em, scrub_dev, i);
if (ret)
goto out;
}
}
out:
free_extent_map(em);
return ret;
}
static int finish_extent_writes_for_zoned(struct btrfs_root *root,
struct btrfs_block_group *cache)
{
struct btrfs_fs_info *fs_info = cache->fs_info;
struct btrfs_trans_handle *trans;
if (!btrfs_is_zoned(fs_info))
return 0;
btrfs_wait_block_group_reservations(cache);
btrfs_wait_nocow_writers(cache);
btrfs_wait_ordered_roots(fs_info, U64_MAX, cache->start, cache->length);
trans = btrfs_join_transaction(root);
if (IS_ERR(trans))
return PTR_ERR(trans);
return btrfs_commit_transaction(trans);
}
static noinline_for_stack
int scrub_enumerate_chunks(struct scrub_ctx *sctx,
struct btrfs_device *scrub_dev, u64 start, u64 end)
{
struct btrfs_dev_extent *dev_extent = NULL;
struct btrfs_path *path;
struct btrfs_fs_info *fs_info = sctx->fs_info;
struct btrfs_root *root = fs_info->dev_root;
u64 chunk_offset;
int ret = 0;
btrfs: Continue replace when set_block_ro failed xfstests/011 failed in node with small_size filesystem. Can be reproduced by following script: DEV_LIST="/dev/vdd /dev/vde" DEV_REPLACE="/dev/vdf" do_test() { local mkfs_opt="$1" local size="$2" dmesg -c >/dev/null umount $SCRATCH_MNT &>/dev/null echo mkfs.btrfs -f $mkfs_opt "${DEV_LIST[*]}" mkfs.btrfs -f $mkfs_opt "${DEV_LIST[@]}" || return 1 mount "${DEV_LIST[0]}" $SCRATCH_MNT echo -n "Writing big files" dd if=/dev/urandom of=$SCRATCH_MNT/t0 bs=1M count=1 >/dev/null 2>&1 for ((i = 1; i <= size; i++)); do echo -n . /bin/cp $SCRATCH_MNT/t0 $SCRATCH_MNT/t$i || return 1 done echo echo Start replace btrfs replace start -Bf "${DEV_LIST[0]}" "$DEV_REPLACE" $SCRATCH_MNT || { dmesg return 1 } return 0 } # Set size to value near fs size # for example, 1897 can trigger this bug in 2.6G device. # ./do_test "-d raid1 -m raid1" 1897 System will report replace fail with following warning in dmesg: [ 134.710853] BTRFS: dev_replace from /dev/vdd (devid 1) to /dev/vdf started [ 135.542390] BTRFS: btrfs_scrub_dev(/dev/vdd, 1, /dev/vdf) failed -28 [ 135.543505] ------------[ cut here ]------------ [ 135.544127] WARNING: CPU: 0 PID: 4080 at fs/btrfs/dev-replace.c:428 btrfs_dev_replace_start+0x398/0x440() [ 135.545276] Modules linked in: [ 135.545681] CPU: 0 PID: 4080 Comm: btrfs Not tainted 4.3.0 #256 [ 135.546439] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.8.2-0-g33fbe13 by qemu-project.org 04/01/2014 [ 135.547798] ffffffff81c5bfcf ffff88003cbb3d28 ffffffff817fe7b5 0000000000000000 [ 135.548774] ffff88003cbb3d60 ffffffff810a88f1 ffff88002b030000 00000000ffffffe4 [ 135.549774] ffff88003c080000 ffff88003c082588 ffff88003c28ab60 ffff88003cbb3d70 [ 135.550758] Call Trace: [ 135.551086] [<ffffffff817fe7b5>] dump_stack+0x44/0x55 [ 135.551737] [<ffffffff810a88f1>] warn_slowpath_common+0x81/0xc0 [ 135.552487] [<ffffffff810a89e5>] warn_slowpath_null+0x15/0x20 [ 135.553211] [<ffffffff81448c88>] btrfs_dev_replace_start+0x398/0x440 [ 135.554051] [<ffffffff81412c3e>] btrfs_ioctl+0x1d2e/0x25c0 [ 135.554722] [<ffffffff8114c7ba>] ? __audit_syscall_entry+0xaa/0xf0 [ 135.555506] [<ffffffff8111ab36>] ? current_kernel_time64+0x56/0xa0 [ 135.556304] [<ffffffff81201e3d>] do_vfs_ioctl+0x30d/0x580 [ 135.557009] [<ffffffff8114c7ba>] ? __audit_syscall_entry+0xaa/0xf0 [ 135.557855] [<ffffffff810011d1>] ? do_audit_syscall_entry+0x61/0x70 [ 135.558669] [<ffffffff8120d1c1>] ? __fget_light+0x61/0x90 [ 135.559374] [<ffffffff81202124>] SyS_ioctl+0x74/0x80 [ 135.559987] [<ffffffff81809857>] entry_SYSCALL_64_fastpath+0x12/0x6f [ 135.560842] ---[ end trace 2a5c1fc3205abbdd ]--- Reason: When big data writen to fs, the whole free space will be allocated for data chunk. And operation as scrub need to set_block_ro(), and when there is only one metadata chunk in system(or other metadata chunks are all full), the function will try to allocate a new chunk, and failed because no space in device. Fix: When set_block_ro failed for metadata chunk, it is not a problem because scrub_lock paused commit_trancaction in same time, and metadata are always cowed, so the on-the-fly writepages will not write data into same place with scrub/replace. Let replace continue in this case is no problem. Tested by above script, and xfstests/011, plus 100 times xfstests/070. Changelog v1->v2: 1: Add detail comments in source and commit-message. 2: Add dmesg detail into commit-message. 3: Limit return value of -ENOSPC to be passed. All suggested by: Filipe Manana <fdmanana@gmail.com> Suggested-by: Filipe Manana <fdmanana@gmail.com> Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com> Signed-off-by: Chris Mason <clm@fb.com>
2015-11-17 10:46:17 +00:00
int ro_set;
int slot;
struct extent_buffer *l;
struct btrfs_key key;
struct btrfs_key found_key;
struct btrfs_block_group *cache;
struct btrfs_dev_replace *dev_replace = &fs_info->dev_replace;
path = btrfs_alloc_path();
if (!path)
return -ENOMEM;
path->reada = READA_FORWARD;
path->search_commit_root = 1;
path->skip_locking = 1;
key.objectid = scrub_dev->devid;
key.offset = 0ull;
key.type = BTRFS_DEV_EXTENT_KEY;
while (1) {
u64 dev_extent_len;
ret = btrfs_search_slot(NULL, root, &key, path, 0, 0);
if (ret < 0)
break;
if (ret > 0) {
if (path->slots[0] >=
btrfs_header_nritems(path->nodes[0])) {
ret = btrfs_next_leaf(root, path);
if (ret < 0)
break;
if (ret > 0) {
ret = 0;
break;
}
} else {
ret = 0;
}
}
l = path->nodes[0];
slot = path->slots[0];
btrfs_item_key_to_cpu(l, &found_key, slot);
if (found_key.objectid != scrub_dev->devid)
break;
if (found_key.type != BTRFS_DEV_EXTENT_KEY)
break;
if (found_key.offset >= end)
break;
if (found_key.offset < key.offset)
break;
dev_extent = btrfs_item_ptr(l, slot, struct btrfs_dev_extent);
dev_extent_len = btrfs_dev_extent_length(l, dev_extent);
if (found_key.offset + dev_extent_len <= start)
goto skip;
chunk_offset = btrfs_dev_extent_chunk_offset(l, dev_extent);
/*
* get a reference on the corresponding block group to prevent
* the chunk from going away while we scrub it
*/
cache = btrfs_lookup_block_group(fs_info, chunk_offset);
/* some chunks are removed but not committed to disk yet,
* continue scrubbing */
if (!cache)
goto skip;
btrfs: fix assertion failure during scrub due to block group reallocation During a scrub, or device replace, we can race with block group removal and allocation and trigger the following assertion failure: [7526.385524] assertion failed: cache->start == chunk_offset, in fs/btrfs/scrub.c:3817 [7526.387351] ------------[ cut here ]------------ [7526.387373] kernel BUG at fs/btrfs/ctree.h:3599! [7526.388001] invalid opcode: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC PTI [7526.388970] CPU: 2 PID: 1158150 Comm: btrfs Not tainted 5.17.0-rc8-btrfs-next-114 #4 [7526.390279] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014 [7526.392430] RIP: 0010:assertfail.constprop.0+0x18/0x1a [btrfs] [7526.393520] Code: f3 48 c7 c7 20 (...) [7526.396926] RSP: 0018:ffffb9154176bc40 EFLAGS: 00010246 [7526.397690] RAX: 0000000000000048 RBX: ffffa0db8a910000 RCX: 0000000000000000 [7526.398732] RDX: 0000000000000000 RSI: ffffffff9d7239a2 RDI: 00000000ffffffff [7526.399766] RBP: ffffa0db8a911e10 R08: ffffffffa71a3ca0 R09: 0000000000000001 [7526.400793] R10: 0000000000000001 R11: 0000000000000000 R12: ffffa0db4b170800 [7526.401839] R13: 00000003494b0000 R14: ffffa0db7c55b488 R15: ffffa0db8b19a000 [7526.402874] FS: 00007f6c99c40640(0000) GS:ffffa0de6d200000(0000) knlGS:0000000000000000 [7526.404038] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [7526.405040] CR2: 00007f31b0882160 CR3: 000000014b38c004 CR4: 0000000000370ee0 [7526.406112] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [7526.407148] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [7526.408169] Call Trace: [7526.408529] <TASK> [7526.408839] scrub_enumerate_chunks.cold+0x11/0x79 [btrfs] [7526.409690] ? do_wait_intr_irq+0xb0/0xb0 [7526.410276] btrfs_scrub_dev+0x226/0x620 [btrfs] [7526.410995] ? preempt_count_add+0x49/0xa0 [7526.411592] btrfs_ioctl+0x1ab5/0x36d0 [btrfs] [7526.412278] ? __fget_files+0xc9/0x1b0 [7526.412825] ? kvm_sched_clock_read+0x14/0x40 [7526.413459] ? lock_release+0x155/0x4a0 [7526.414022] ? __x64_sys_ioctl+0x83/0xb0 [7526.414601] __x64_sys_ioctl+0x83/0xb0 [7526.415150] do_syscall_64+0x3b/0xc0 [7526.415675] entry_SYSCALL_64_after_hwframe+0x44/0xae [7526.416408] RIP: 0033:0x7f6c99d34397 [7526.416931] Code: 3c 1c e8 1c ff (...) [7526.419641] RSP: 002b:00007f6c99c3fca8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 [7526.420735] RAX: ffffffffffffffda RBX: 00005624e1e007b0 RCX: 00007f6c99d34397 [7526.421779] RDX: 00005624e1e007b0 RSI: 00000000c400941b RDI: 0000000000000003 [7526.422820] RBP: 0000000000000000 R08: 00007f6c99c40640 R09: 0000000000000000 [7526.423906] R10: 00007f6c99c40640 R11: 0000000000000246 R12: 00007fff746755de [7526.424924] R13: 00007fff746755df R14: 0000000000000000 R15: 00007f6c99c40640 [7526.425950] </TASK> That assertion is relatively new, introduced with commit d04fbe19aefd2 ("btrfs: scrub: cleanup the argument list of scrub_chunk()"). The block group we get at scrub_enumerate_chunks() can actually have a start address that is smaller then the chunk offset we extracted from a device extent item we got from the commit root of the device tree. This is very rare, but it can happen due to a race with block group removal and allocation. For example, the following steps show how this can happen: 1) We are at transaction T, and we have the following blocks groups, sorted by their logical start address: [ bg A, start address A, length 1G (data) ] [ bg B, start address B, length 1G (data) ] (...) [ bg W, start address W, length 1G (data) ] --> logical address space hole of 256M, there used to be a 256M metadata block group here [ bg Y, start address Y, length 256M (metadata) ] --> Y matches W's end offset + 256M Block group Y is the block group with the highest logical address in the whole filesystem; 2) Block group Y is deleted and its extent mapping is removed by the call to remove_extent_mapping() made from btrfs_remove_block_group(). So after this point, the last element of the mapping red black tree, its rightmost node, is the mapping for block group W; 3) While still at transaction T, a new data block group is allocated, with a length of 1G. When creating the block group we do a call to find_next_chunk(), which returns the logical start address for the new block group. This calls returns X, which corresponds to the end offset of the last block group, the rightmost node in the mapping red black tree (fs_info->mapping_tree), plus one. So we get a new block group that starts at logical address X and with a length of 1G. It spans over the whole logical range of the old block group Y, that was previously removed in the same transaction. However the device extent allocated to block group X is not the same device extent that was used by block group Y, and it also does not overlap that extent, which must be always the case because we allocate extents by searching through the commit root of the device tree (otherwise it could corrupt a filesystem after a power failure or an unclean shutdown in general), so the extent allocator is behaving as expected; 4) We have a task running scrub, currently at scrub_enumerate_chunks(). There it searches for device extent items in the device tree, using its commit root. It finds a device extent item that was used by block group Y, and it extracts the value Y from that item into the local variable 'chunk_offset', using btrfs_dev_extent_chunk_offset(); It then calls btrfs_lookup_block_group() to find block group for the logical address Y - since there's currently no block group that starts at that logical address, it returns block group X, because its range contains Y. This results in triggering the assertion: ASSERT(cache->start == chunk_offset); right before calling scrub_chunk(), as cache->start is X and chunk_offset is Y. This is more likely to happen of filesystems not larger than 50G, because for these filesystems we use a 256M size for metadata block groups and a 1G size for data block groups, while for filesystems larger than 50G, we use a 1G size for both data and metadata block groups (except for zoned filesystems). It could also happen on any filesystem size due to the fact that system block groups are always smaller (32M) than both data and metadata block groups, but these are not frequently deleted, so much less likely to trigger the race. So make scrub skip any block group with a start offset that is less than the value we expect, as that means it's a new block group that was created in the current transaction. It's pointless to continue and try to scrub its extents, because scrub searches for extents using the commit root, so it won't find any. For a device replace, skip it as well for the same reasons, and we don't need to worry about the possibility of extents of the new block group not being to the new device, because we have the write duplication setup done through btrfs_map_block(). Fixes: d04fbe19aefd ("btrfs: scrub: cleanup the argument list of scrub_chunk()") CC: stable@vger.kernel.org # 5.17 Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2022-04-19 13:23:57 +00:00
ASSERT(cache->start <= chunk_offset);
/*
* We are using the commit root to search for device extents, so
* that means we could have found a device extent item from a
* block group that was deleted in the current transaction. The
* logical start offset of the deleted block group, stored at
* @chunk_offset, might be part of the logical address range of
* a new block group (which uses different physical extents).
* In this case btrfs_lookup_block_group() has returned the new
* block group, and its start address is less than @chunk_offset.
*
* We skip such new block groups, because it's pointless to
* process them, as we won't find their extents because we search
* for them using the commit root of the extent tree. For a device
* replace it's also fine to skip it, we won't miss copying them
* to the target device because we have the write duplication
* setup through the regular write path (by btrfs_map_block()),
* and we have committed a transaction when we started the device
* replace, right after setting up the device replace state.
*/
if (cache->start < chunk_offset) {
btrfs_put_block_group(cache);
goto skip;
}
btrfs: zoned: mark block groups to copy for device-replace This is the 1/4 patch to support device-replace on zoned filesystems. We have two types of IOs during the device replace process. One is an IO to "copy" (by the scrub functions) all the device extents from the source device to the destination device. The other one is an IO to "clone" (by handle_ops_on_dev_replace()) new incoming write IOs from users to the source device into the target device. Cloning incoming IOs can break the sequential write rule in on target device. When a write is mapped in the middle of a block group, the IO is directed to the middle of a target device zone, which breaks the sequential write requirement. However, the cloning function cannot be disabled since incoming IOs targeting already copied device extents must be cloned so that the IO is executed on the target device. We cannot use dev_replace->cursor_{left,right} to determine whether a bio is going to a not yet copied region. Since we have a time gap between finishing btrfs_scrub_dev() and rewriting the mapping tree in btrfs_dev_replace_finishing(), we can have a newly allocated device extent which is never cloned nor copied. So the point is to copy only already existing device extents. This patch introduces mark_block_group_to_copy() to mark existing block groups as a target of copying. Then, handle_ops_on_dev_replace() and dev-replace can check the flag to do their job. Also, btrfs_finish_block_group_to_copy() will check if the copied stripe is the last stripe in the block group. With the last stripe copied, the to_copy flag is finally disabled. Afterwards we can safely clone incoming IOs on this block group. Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com> Signed-off-by: David Sterba <dsterba@suse.com>
2021-02-04 10:22:11 +00:00
if (sctx->is_dev_replace && btrfs_is_zoned(fs_info)) {
if (!test_bit(BLOCK_GROUP_FLAG_TO_COPY, &cache->runtime_flags)) {
btrfs_put_block_group(cache);
goto skip;
btrfs: zoned: mark block groups to copy for device-replace This is the 1/4 patch to support device-replace on zoned filesystems. We have two types of IOs during the device replace process. One is an IO to "copy" (by the scrub functions) all the device extents from the source device to the destination device. The other one is an IO to "clone" (by handle_ops_on_dev_replace()) new incoming write IOs from users to the source device into the target device. Cloning incoming IOs can break the sequential write rule in on target device. When a write is mapped in the middle of a block group, the IO is directed to the middle of a target device zone, which breaks the sequential write requirement. However, the cloning function cannot be disabled since incoming IOs targeting already copied device extents must be cloned so that the IO is executed on the target device. We cannot use dev_replace->cursor_{left,right} to determine whether a bio is going to a not yet copied region. Since we have a time gap between finishing btrfs_scrub_dev() and rewriting the mapping tree in btrfs_dev_replace_finishing(), we can have a newly allocated device extent which is never cloned nor copied. So the point is to copy only already existing device extents. This patch introduces mark_block_group_to_copy() to mark existing block groups as a target of copying. Then, handle_ops_on_dev_replace() and dev-replace can check the flag to do their job. Also, btrfs_finish_block_group_to_copy() will check if the copied stripe is the last stripe in the block group. With the last stripe copied, the to_copy flag is finally disabled. Afterwards we can safely clone incoming IOs on this block group. Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com> Signed-off-by: David Sterba <dsterba@suse.com>
2021-02-04 10:22:11 +00:00
}
}
btrfs: fix a race between scrub and block group removal/allocation When scrub is verifying the extents of a block group for a device, it is possible that the corresponding block group gets removed and its logical address and device extents get used for a new block group allocation. When this happens scrub incorrectly reports that errors were detected and, if the the new block group has a different profile then the old one, deleted block group, we can crash due to a null pointer dereference. Possibly other unexpected and weird consequences can happen as well. Consider the following sequence of actions that leads to the null pointer dereference crash when scrub is running in parallel with balance: 1) Balance sets block group X to read-only mode and starts relocating it. Block group X is a metadata block group, has a raid1 profile (two device extents, each one in a different device) and a logical address of 19424870400; 2) Scrub is running and finds device extent E, which belongs to block group X. It enters scrub_stripe() to find all extents allocated to block group X, the search is done using the extent tree; 3) Balance finishes relocating block group X and removes block group X; 4) Balance starts relocating another block group and when trying to commit the current transaction as part of the preparation step (prepare_to_relocate()), it blocks because scrub is running; 5) The scrub task finds the metadata extent at the logical address 19425001472 and marks the pages of the extent to be read by a bio (struct scrub_bio). The extent item's flags, which have the bit BTRFS_EXTENT_FLAG_TREE_BLOCK set, are added to each page (struct scrub_page). It is these flags in the scrub pages that tells the bio's end io function (scrub_bio_end_io_worker) which type of extent it is dealing with. At this point we end up with 4 pages in a bio which is ready for submission (the metadata extent has a size of 16Kb, so that gives 4 pages on x86); 6) At the next iteration of scrub_stripe(), scrub checks that there is a pause request from the relocation task trying to commit a transaction, therefore it submits the pending bio and pauses, waiting for the transaction commit to complete before resuming; 7) The relocation task commits the transaction. The device extent E, that was used by our block group X, is now available for allocation, since the commit root for the device tree was swapped by the transaction commit; 8) Another task doing a direct IO write allocates a new data block group Y which ends using device extent E. This new block group Y also ends up getting the same logical address that block group X had: 19424870400. This happens because block group X was the block group with the highest logical address and, when allocating Y, find_next_chunk() returns the end offset of the current last block group to be used as the logical address for the new block group, which is 18351128576 + 1073741824 = 19424870400 So our new block group Y has the same logical address and device extent that block group X had. However Y is a data block group, while X was a metadata one, and Y has a raid0 profile, while X had a raid1 profile; 9) After allocating block group Y, the direct IO submits a bio to write to device extent E; 10) The read bio submitted by scrub reads the 4 pages (16Kb) from device extent E, which now correspond to the data written by the task that did a direct IO write. Then at the end io function associated with the bio, scrub_bio_end_io_worker(), we call scrub_block_complete() which calls scrub_checksum(). This later function checks the flags of the first page, and sees that the bit BTRFS_EXTENT_FLAG_TREE_BLOCK is set in the flags, so it assumes it has a metadata extent and then calls scrub_checksum_tree_block(). That functions returns an error, since interpreting data as a metadata extent causes the checksum verification to fail. So this makes scrub_checksum() call scrub_handle_errored_block(), which determines 'failed_mirror_index' to be 1, since the device extent E was allocated as the second mirror of block group X. It allocates BTRFS_MAX_MIRRORS scrub_block structures as an array at 'sblocks_for_recheck', and all the memory is initialized to zeroes by kcalloc(). After that it calls scrub_setup_recheck_block(), which is responsible for filling each of those structures. However, when that function calls btrfs_map_sblock() against the logical address of the metadata extent, 19425001472, it gets a struct btrfs_bio ('bbio') that matches the current block group Y. However block group Y has a raid0 profile and not a raid1 profile like X had, so the following call returns 1: scrub_nr_raid_mirrors(bbio) And as a result scrub_setup_recheck_block() only initializes the first (index 0) scrub_block structure in 'sblocks_for_recheck'. Then scrub_recheck_block() is called by scrub_handle_errored_block() with the second (index 1) scrub_block structure as the argument, because 'failed_mirror_index' was previously set to 1. This scrub_block was not initialized by scrub_setup_recheck_block(), so it has zero pages, its 'page_count' member is 0 and its 'pagev' page array has all members pointing to NULL. Finally when scrub_recheck_block() calls scrub_recheck_block_checksum() we have a NULL pointer dereference when accessing the flags of the first page, as pavev[0] is NULL: static void scrub_recheck_block_checksum(struct scrub_block *sblock) { (...) if (sblock->pagev[0]->flags & BTRFS_EXTENT_FLAG_DATA) scrub_checksum_data(sblock); (...) } Producing a stack trace like the following: [542998.008985] BUG: kernel NULL pointer dereference, address: 0000000000000028 [542998.010238] #PF: supervisor read access in kernel mode [542998.010878] #PF: error_code(0x0000) - not-present page [542998.011516] PGD 0 P4D 0 [542998.011929] Oops: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC PTI [542998.012786] CPU: 3 PID: 4846 Comm: kworker/u8:1 Tainted: G B W 5.6.0-rc7-btrfs-next-58 #1 [542998.014524] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014 [542998.016065] Workqueue: btrfs-scrub btrfs_work_helper [btrfs] [542998.017255] RIP: 0010:scrub_recheck_block_checksum+0xf/0x20 [btrfs] [542998.018474] Code: 4c 89 e6 ... [542998.021419] RSP: 0018:ffffa7af0375fbd8 EFLAGS: 00010202 [542998.022120] RAX: 0000000000000000 RBX: ffff9792e674d120 RCX: 0000000000000000 [542998.023178] RDX: 0000000000000001 RSI: ffff9792e674d120 RDI: ffff9792e674d120 [542998.024465] RBP: 0000000000000000 R08: 0000000000000067 R09: 0000000000000001 [542998.025462] R10: ffffa7af0375fa50 R11: 0000000000000000 R12: ffff9791f61fe800 [542998.026357] R13: ffff9792e674d120 R14: 0000000000000001 R15: ffffffffc0e3dfc0 [542998.027237] FS: 0000000000000000(0000) GS:ffff9792fb200000(0000) knlGS:0000000000000000 [542998.028327] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [542998.029261] CR2: 0000000000000028 CR3: 00000000b3b18003 CR4: 00000000003606e0 [542998.030301] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [542998.031316] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [542998.032380] Call Trace: [542998.032752] scrub_recheck_block+0x162/0x400 [btrfs] [542998.033500] ? __alloc_pages_nodemask+0x31e/0x460 [542998.034228] scrub_handle_errored_block+0x6f8/0x1920 [btrfs] [542998.035170] scrub_bio_end_io_worker+0x100/0x520 [btrfs] [542998.035991] btrfs_work_helper+0xaa/0x720 [btrfs] [542998.036735] process_one_work+0x26d/0x6a0 [542998.037275] worker_thread+0x4f/0x3e0 [542998.037740] ? process_one_work+0x6a0/0x6a0 [542998.038378] kthread+0x103/0x140 [542998.038789] ? kthread_create_worker_on_cpu+0x70/0x70 [542998.039419] ret_from_fork+0x3a/0x50 [542998.039875] Modules linked in: dm_snapshot dm_thin_pool ... [542998.047288] CR2: 0000000000000028 [542998.047724] ---[ end trace bde186e176c7f96a ]--- This issue has been around for a long time, possibly since scrub exists. The last time I ran into it was over 2 years ago. After recently fixing fstests to pass the "--full-balance" command line option to btrfs-progs when doing balance, several tests started to more heavily exercise balance with fsstress, scrub and other operations in parallel, and therefore started to hit this issue again (with btrfs/061 for example). Fix this by having scrub increment the 'trimming' counter of the block group, which pins the block group in such a way that it guarantees neither its logical address nor device extents can be reused by future block group allocations until we decrement the 'trimming' counter. Also make sure that on each iteration of scrub_stripe() we stop scrubbing the block group if it was removed already. A later patch in the series will rename the block group's 'trimming' counter and its helpers to a more generic name, since now it is not used exclusively for pinning while trimming anymore. CC: stable@vger.kernel.org # 4.4+ Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2020-05-08 10:01:10 +00:00
/*
* Make sure that while we are scrubbing the corresponding block
* group doesn't get its logical address and its device extents
* reused for another block group, which can possibly be of a
* different type and different profile. We do this to prevent
* false error detections and crashes due to bogus attempts to
* repair extents.
*/
spin_lock(&cache->lock);
if (test_bit(BLOCK_GROUP_FLAG_REMOVED, &cache->runtime_flags)) {
btrfs: fix a race between scrub and block group removal/allocation When scrub is verifying the extents of a block group for a device, it is possible that the corresponding block group gets removed and its logical address and device extents get used for a new block group allocation. When this happens scrub incorrectly reports that errors were detected and, if the the new block group has a different profile then the old one, deleted block group, we can crash due to a null pointer dereference. Possibly other unexpected and weird consequences can happen as well. Consider the following sequence of actions that leads to the null pointer dereference crash when scrub is running in parallel with balance: 1) Balance sets block group X to read-only mode and starts relocating it. Block group X is a metadata block group, has a raid1 profile (two device extents, each one in a different device) and a logical address of 19424870400; 2) Scrub is running and finds device extent E, which belongs to block group X. It enters scrub_stripe() to find all extents allocated to block group X, the search is done using the extent tree; 3) Balance finishes relocating block group X and removes block group X; 4) Balance starts relocating another block group and when trying to commit the current transaction as part of the preparation step (prepare_to_relocate()), it blocks because scrub is running; 5) The scrub task finds the metadata extent at the logical address 19425001472 and marks the pages of the extent to be read by a bio (struct scrub_bio). The extent item's flags, which have the bit BTRFS_EXTENT_FLAG_TREE_BLOCK set, are added to each page (struct scrub_page). It is these flags in the scrub pages that tells the bio's end io function (scrub_bio_end_io_worker) which type of extent it is dealing with. At this point we end up with 4 pages in a bio which is ready for submission (the metadata extent has a size of 16Kb, so that gives 4 pages on x86); 6) At the next iteration of scrub_stripe(), scrub checks that there is a pause request from the relocation task trying to commit a transaction, therefore it submits the pending bio and pauses, waiting for the transaction commit to complete before resuming; 7) The relocation task commits the transaction. The device extent E, that was used by our block group X, is now available for allocation, since the commit root for the device tree was swapped by the transaction commit; 8) Another task doing a direct IO write allocates a new data block group Y which ends using device extent E. This new block group Y also ends up getting the same logical address that block group X had: 19424870400. This happens because block group X was the block group with the highest logical address and, when allocating Y, find_next_chunk() returns the end offset of the current last block group to be used as the logical address for the new block group, which is 18351128576 + 1073741824 = 19424870400 So our new block group Y has the same logical address and device extent that block group X had. However Y is a data block group, while X was a metadata one, and Y has a raid0 profile, while X had a raid1 profile; 9) After allocating block group Y, the direct IO submits a bio to write to device extent E; 10) The read bio submitted by scrub reads the 4 pages (16Kb) from device extent E, which now correspond to the data written by the task that did a direct IO write. Then at the end io function associated with the bio, scrub_bio_end_io_worker(), we call scrub_block_complete() which calls scrub_checksum(). This later function checks the flags of the first page, and sees that the bit BTRFS_EXTENT_FLAG_TREE_BLOCK is set in the flags, so it assumes it has a metadata extent and then calls scrub_checksum_tree_block(). That functions returns an error, since interpreting data as a metadata extent causes the checksum verification to fail. So this makes scrub_checksum() call scrub_handle_errored_block(), which determines 'failed_mirror_index' to be 1, since the device extent E was allocated as the second mirror of block group X. It allocates BTRFS_MAX_MIRRORS scrub_block structures as an array at 'sblocks_for_recheck', and all the memory is initialized to zeroes by kcalloc(). After that it calls scrub_setup_recheck_block(), which is responsible for filling each of those structures. However, when that function calls btrfs_map_sblock() against the logical address of the metadata extent, 19425001472, it gets a struct btrfs_bio ('bbio') that matches the current block group Y. However block group Y has a raid0 profile and not a raid1 profile like X had, so the following call returns 1: scrub_nr_raid_mirrors(bbio) And as a result scrub_setup_recheck_block() only initializes the first (index 0) scrub_block structure in 'sblocks_for_recheck'. Then scrub_recheck_block() is called by scrub_handle_errored_block() with the second (index 1) scrub_block structure as the argument, because 'failed_mirror_index' was previously set to 1. This scrub_block was not initialized by scrub_setup_recheck_block(), so it has zero pages, its 'page_count' member is 0 and its 'pagev' page array has all members pointing to NULL. Finally when scrub_recheck_block() calls scrub_recheck_block_checksum() we have a NULL pointer dereference when accessing the flags of the first page, as pavev[0] is NULL: static void scrub_recheck_block_checksum(struct scrub_block *sblock) { (...) if (sblock->pagev[0]->flags & BTRFS_EXTENT_FLAG_DATA) scrub_checksum_data(sblock); (...) } Producing a stack trace like the following: [542998.008985] BUG: kernel NULL pointer dereference, address: 0000000000000028 [542998.010238] #PF: supervisor read access in kernel mode [542998.010878] #PF: error_code(0x0000) - not-present page [542998.011516] PGD 0 P4D 0 [542998.011929] Oops: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC PTI [542998.012786] CPU: 3 PID: 4846 Comm: kworker/u8:1 Tainted: G B W 5.6.0-rc7-btrfs-next-58 #1 [542998.014524] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014 [542998.016065] Workqueue: btrfs-scrub btrfs_work_helper [btrfs] [542998.017255] RIP: 0010:scrub_recheck_block_checksum+0xf/0x20 [btrfs] [542998.018474] Code: 4c 89 e6 ... [542998.021419] RSP: 0018:ffffa7af0375fbd8 EFLAGS: 00010202 [542998.022120] RAX: 0000000000000000 RBX: ffff9792e674d120 RCX: 0000000000000000 [542998.023178] RDX: 0000000000000001 RSI: ffff9792e674d120 RDI: ffff9792e674d120 [542998.024465] RBP: 0000000000000000 R08: 0000000000000067 R09: 0000000000000001 [542998.025462] R10: ffffa7af0375fa50 R11: 0000000000000000 R12: ffff9791f61fe800 [542998.026357] R13: ffff9792e674d120 R14: 0000000000000001 R15: ffffffffc0e3dfc0 [542998.027237] FS: 0000000000000000(0000) GS:ffff9792fb200000(0000) knlGS:0000000000000000 [542998.028327] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [542998.029261] CR2: 0000000000000028 CR3: 00000000b3b18003 CR4: 00000000003606e0 [542998.030301] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [542998.031316] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [542998.032380] Call Trace: [542998.032752] scrub_recheck_block+0x162/0x400 [btrfs] [542998.033500] ? __alloc_pages_nodemask+0x31e/0x460 [542998.034228] scrub_handle_errored_block+0x6f8/0x1920 [btrfs] [542998.035170] scrub_bio_end_io_worker+0x100/0x520 [btrfs] [542998.035991] btrfs_work_helper+0xaa/0x720 [btrfs] [542998.036735] process_one_work+0x26d/0x6a0 [542998.037275] worker_thread+0x4f/0x3e0 [542998.037740] ? process_one_work+0x6a0/0x6a0 [542998.038378] kthread+0x103/0x140 [542998.038789] ? kthread_create_worker_on_cpu+0x70/0x70 [542998.039419] ret_from_fork+0x3a/0x50 [542998.039875] Modules linked in: dm_snapshot dm_thin_pool ... [542998.047288] CR2: 0000000000000028 [542998.047724] ---[ end trace bde186e176c7f96a ]--- This issue has been around for a long time, possibly since scrub exists. The last time I ran into it was over 2 years ago. After recently fixing fstests to pass the "--full-balance" command line option to btrfs-progs when doing balance, several tests started to more heavily exercise balance with fsstress, scrub and other operations in parallel, and therefore started to hit this issue again (with btrfs/061 for example). Fix this by having scrub increment the 'trimming' counter of the block group, which pins the block group in such a way that it guarantees neither its logical address nor device extents can be reused by future block group allocations until we decrement the 'trimming' counter. Also make sure that on each iteration of scrub_stripe() we stop scrubbing the block group if it was removed already. A later patch in the series will rename the block group's 'trimming' counter and its helpers to a more generic name, since now it is not used exclusively for pinning while trimming anymore. CC: stable@vger.kernel.org # 4.4+ Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2020-05-08 10:01:10 +00:00
spin_unlock(&cache->lock);
btrfs_put_block_group(cache);
goto skip;
}
btrfs_freeze_block_group(cache);
btrfs: fix a race between scrub and block group removal/allocation When scrub is verifying the extents of a block group for a device, it is possible that the corresponding block group gets removed and its logical address and device extents get used for a new block group allocation. When this happens scrub incorrectly reports that errors were detected and, if the the new block group has a different profile then the old one, deleted block group, we can crash due to a null pointer dereference. Possibly other unexpected and weird consequences can happen as well. Consider the following sequence of actions that leads to the null pointer dereference crash when scrub is running in parallel with balance: 1) Balance sets block group X to read-only mode and starts relocating it. Block group X is a metadata block group, has a raid1 profile (two device extents, each one in a different device) and a logical address of 19424870400; 2) Scrub is running and finds device extent E, which belongs to block group X. It enters scrub_stripe() to find all extents allocated to block group X, the search is done using the extent tree; 3) Balance finishes relocating block group X and removes block group X; 4) Balance starts relocating another block group and when trying to commit the current transaction as part of the preparation step (prepare_to_relocate()), it blocks because scrub is running; 5) The scrub task finds the metadata extent at the logical address 19425001472 and marks the pages of the extent to be read by a bio (struct scrub_bio). The extent item's flags, which have the bit BTRFS_EXTENT_FLAG_TREE_BLOCK set, are added to each page (struct scrub_page). It is these flags in the scrub pages that tells the bio's end io function (scrub_bio_end_io_worker) which type of extent it is dealing with. At this point we end up with 4 pages in a bio which is ready for submission (the metadata extent has a size of 16Kb, so that gives 4 pages on x86); 6) At the next iteration of scrub_stripe(), scrub checks that there is a pause request from the relocation task trying to commit a transaction, therefore it submits the pending bio and pauses, waiting for the transaction commit to complete before resuming; 7) The relocation task commits the transaction. The device extent E, that was used by our block group X, is now available for allocation, since the commit root for the device tree was swapped by the transaction commit; 8) Another task doing a direct IO write allocates a new data block group Y which ends using device extent E. This new block group Y also ends up getting the same logical address that block group X had: 19424870400. This happens because block group X was the block group with the highest logical address and, when allocating Y, find_next_chunk() returns the end offset of the current last block group to be used as the logical address for the new block group, which is 18351128576 + 1073741824 = 19424870400 So our new block group Y has the same logical address and device extent that block group X had. However Y is a data block group, while X was a metadata one, and Y has a raid0 profile, while X had a raid1 profile; 9) After allocating block group Y, the direct IO submits a bio to write to device extent E; 10) The read bio submitted by scrub reads the 4 pages (16Kb) from device extent E, which now correspond to the data written by the task that did a direct IO write. Then at the end io function associated with the bio, scrub_bio_end_io_worker(), we call scrub_block_complete() which calls scrub_checksum(). This later function checks the flags of the first page, and sees that the bit BTRFS_EXTENT_FLAG_TREE_BLOCK is set in the flags, so it assumes it has a metadata extent and then calls scrub_checksum_tree_block(). That functions returns an error, since interpreting data as a metadata extent causes the checksum verification to fail. So this makes scrub_checksum() call scrub_handle_errored_block(), which determines 'failed_mirror_index' to be 1, since the device extent E was allocated as the second mirror of block group X. It allocates BTRFS_MAX_MIRRORS scrub_block structures as an array at 'sblocks_for_recheck', and all the memory is initialized to zeroes by kcalloc(). After that it calls scrub_setup_recheck_block(), which is responsible for filling each of those structures. However, when that function calls btrfs_map_sblock() against the logical address of the metadata extent, 19425001472, it gets a struct btrfs_bio ('bbio') that matches the current block group Y. However block group Y has a raid0 profile and not a raid1 profile like X had, so the following call returns 1: scrub_nr_raid_mirrors(bbio) And as a result scrub_setup_recheck_block() only initializes the first (index 0) scrub_block structure in 'sblocks_for_recheck'. Then scrub_recheck_block() is called by scrub_handle_errored_block() with the second (index 1) scrub_block structure as the argument, because 'failed_mirror_index' was previously set to 1. This scrub_block was not initialized by scrub_setup_recheck_block(), so it has zero pages, its 'page_count' member is 0 and its 'pagev' page array has all members pointing to NULL. Finally when scrub_recheck_block() calls scrub_recheck_block_checksum() we have a NULL pointer dereference when accessing the flags of the first page, as pavev[0] is NULL: static void scrub_recheck_block_checksum(struct scrub_block *sblock) { (...) if (sblock->pagev[0]->flags & BTRFS_EXTENT_FLAG_DATA) scrub_checksum_data(sblock); (...) } Producing a stack trace like the following: [542998.008985] BUG: kernel NULL pointer dereference, address: 0000000000000028 [542998.010238] #PF: supervisor read access in kernel mode [542998.010878] #PF: error_code(0x0000) - not-present page [542998.011516] PGD 0 P4D 0 [542998.011929] Oops: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC PTI [542998.012786] CPU: 3 PID: 4846 Comm: kworker/u8:1 Tainted: G B W 5.6.0-rc7-btrfs-next-58 #1 [542998.014524] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014 [542998.016065] Workqueue: btrfs-scrub btrfs_work_helper [btrfs] [542998.017255] RIP: 0010:scrub_recheck_block_checksum+0xf/0x20 [btrfs] [542998.018474] Code: 4c 89 e6 ... [542998.021419] RSP: 0018:ffffa7af0375fbd8 EFLAGS: 00010202 [542998.022120] RAX: 0000000000000000 RBX: ffff9792e674d120 RCX: 0000000000000000 [542998.023178] RDX: 0000000000000001 RSI: ffff9792e674d120 RDI: ffff9792e674d120 [542998.024465] RBP: 0000000000000000 R08: 0000000000000067 R09: 0000000000000001 [542998.025462] R10: ffffa7af0375fa50 R11: 0000000000000000 R12: ffff9791f61fe800 [542998.026357] R13: ffff9792e674d120 R14: 0000000000000001 R15: ffffffffc0e3dfc0 [542998.027237] FS: 0000000000000000(0000) GS:ffff9792fb200000(0000) knlGS:0000000000000000 [542998.028327] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [542998.029261] CR2: 0000000000000028 CR3: 00000000b3b18003 CR4: 00000000003606e0 [542998.030301] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [542998.031316] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [542998.032380] Call Trace: [542998.032752] scrub_recheck_block+0x162/0x400 [btrfs] [542998.033500] ? __alloc_pages_nodemask+0x31e/0x460 [542998.034228] scrub_handle_errored_block+0x6f8/0x1920 [btrfs] [542998.035170] scrub_bio_end_io_worker+0x100/0x520 [btrfs] [542998.035991] btrfs_work_helper+0xaa/0x720 [btrfs] [542998.036735] process_one_work+0x26d/0x6a0 [542998.037275] worker_thread+0x4f/0x3e0 [542998.037740] ? process_one_work+0x6a0/0x6a0 [542998.038378] kthread+0x103/0x140 [542998.038789] ? kthread_create_worker_on_cpu+0x70/0x70 [542998.039419] ret_from_fork+0x3a/0x50 [542998.039875] Modules linked in: dm_snapshot dm_thin_pool ... [542998.047288] CR2: 0000000000000028 [542998.047724] ---[ end trace bde186e176c7f96a ]--- This issue has been around for a long time, possibly since scrub exists. The last time I ran into it was over 2 years ago. After recently fixing fstests to pass the "--full-balance" command line option to btrfs-progs when doing balance, several tests started to more heavily exercise balance with fsstress, scrub and other operations in parallel, and therefore started to hit this issue again (with btrfs/061 for example). Fix this by having scrub increment the 'trimming' counter of the block group, which pins the block group in such a way that it guarantees neither its logical address nor device extents can be reused by future block group allocations until we decrement the 'trimming' counter. Also make sure that on each iteration of scrub_stripe() we stop scrubbing the block group if it was removed already. A later patch in the series will rename the block group's 'trimming' counter and its helpers to a more generic name, since now it is not used exclusively for pinning while trimming anymore. CC: stable@vger.kernel.org # 4.4+ Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2020-05-08 10:01:10 +00:00
spin_unlock(&cache->lock);
/*
* we need call btrfs_inc_block_group_ro() with scrubs_paused,
* to avoid deadlock caused by:
* btrfs_inc_block_group_ro()
* -> btrfs_wait_for_commit()
* -> btrfs_commit_transaction()
* -> btrfs_scrub_pause()
*/
scrub_pause_on(fs_info);
btrfs: scrub: Don't check free space before marking a block group RO [BUG] When running btrfs/072 with only one online CPU, it has a pretty high chance to fail: btrfs/072 12s ... _check_dmesg: something found in dmesg (see xfstests-dev/results//btrfs/072.dmesg) - output mismatch (see xfstests-dev/results//btrfs/072.out.bad) --- tests/btrfs/072.out 2019-10-22 15:18:14.008965340 +0800 +++ /xfstests-dev/results//btrfs/072.out.bad 2019-11-14 15:56:45.877152240 +0800 @@ -1,2 +1,3 @@ QA output created by 072 Silence is golden +Scrub find errors in "-m dup -d single" test ... And with the following call trace: BTRFS info (device dm-5): scrub: started on devid 1 ------------[ cut here ]------------ BTRFS: Transaction aborted (error -27) WARNING: CPU: 0 PID: 55087 at fs/btrfs/block-group.c:1890 btrfs_create_pending_block_groups+0x3e6/0x470 [btrfs] CPU: 0 PID: 55087 Comm: btrfs Tainted: G W O 5.4.0-rc1-custom+ #13 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015 RIP: 0010:btrfs_create_pending_block_groups+0x3e6/0x470 [btrfs] Call Trace: __btrfs_end_transaction+0xdb/0x310 [btrfs] btrfs_end_transaction+0x10/0x20 [btrfs] btrfs_inc_block_group_ro+0x1c9/0x210 [btrfs] scrub_enumerate_chunks+0x264/0x940 [btrfs] btrfs_scrub_dev+0x45c/0x8f0 [btrfs] btrfs_ioctl+0x31a1/0x3fb0 [btrfs] do_vfs_ioctl+0x636/0xaa0 ksys_ioctl+0x67/0x90 __x64_sys_ioctl+0x43/0x50 do_syscall_64+0x79/0xe0 entry_SYSCALL_64_after_hwframe+0x49/0xbe ---[ end trace 166c865cec7688e7 ]--- [CAUSE] The error number -27 is -EFBIG, returned from the following call chain: btrfs_end_transaction() |- __btrfs_end_transaction() |- btrfs_create_pending_block_groups() |- btrfs_finish_chunk_alloc() |- btrfs_add_system_chunk() This happens because we have used up all space of btrfs_super_block::sys_chunk_array. The root cause is, we have the following bad loop of creating tons of system chunks: 1. The only SYSTEM chunk is being scrubbed It's very common to have only one SYSTEM chunk. 2. New SYSTEM bg will be allocated As btrfs_inc_block_group_ro() will check if we have enough space after marking current bg RO. If not, then allocate a new chunk. 3. New SYSTEM bg is still empty, will be reclaimed During the reclaim, we will mark it RO again. 4. That newly allocated empty SYSTEM bg get scrubbed We go back to step 2, as the bg is already mark RO but still not cleaned up yet. If the cleaner kthread doesn't get executed fast enough (e.g. only one CPU), then we will get more and more empty SYSTEM chunks, using up all the space of btrfs_super_block::sys_chunk_array. [FIX] Since scrub/dev-replace doesn't always need to allocate new extent, especially chunk tree extent, so we don't really need to do chunk pre-allocation. To break above spiral, here we introduce a new parameter to btrfs_inc_block_group(), @do_chunk_alloc, which indicates whether we need extra chunk pre-allocation. For relocation, we pass @do_chunk_alloc=true, while for scrub, we pass @do_chunk_alloc=false. This should keep unnecessary empty chunks from popping up for scrub. Also, since there are two parameters for btrfs_inc_block_group_ro(), add more comment for it. Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Qu Wenruo <wqu@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2019-11-15 02:09:00 +00:00
/*
* Don't do chunk preallocation for scrub.
*
* This is especially important for SYSTEM bgs, or we can hit
* -EFBIG from btrfs_finish_chunk_alloc() like:
* 1. The only SYSTEM bg is marked RO.
* Since SYSTEM bg is small, that's pretty common.
* 2. New SYSTEM bg will be allocated
* Due to regular version will allocate new chunk.
* 3. New SYSTEM bg is empty and will get cleaned up
* Before cleanup really happens, it's marked RO again.
* 4. Empty SYSTEM bg get scrubbed
* We go back to 2.
*
* This can easily boost the amount of SYSTEM chunks if cleaner
* thread can't be triggered fast enough, and use up all space
* of btrfs_super_block::sys_chunk_array
btrfs: scrub: Require mandatory block group RO for dev-replace [BUG] For dev-replace test cases with fsstress, like btrfs/06[45] btrfs/071, looped runs can lead to random failure, where scrub finds csum error. The possibility is not high, around 1/20 to 1/100, but it's causing data corruption. The bug is observable after commit b12de52896c0 ("btrfs: scrub: Don't check free space before marking a block group RO") [CAUSE] Dev-replace has two source of writes: - Write duplication All writes to source device will also be duplicated to target device. Content: Not yet persisted data/meta - Scrub copy Dev-replace reused scrub code to iterate through existing extents, and copy the verified data to target device. Content: Previously persisted data and metadata The difference in contents makes the following race possible: Regular Writer | Dev-replace ----------------------------------------------------------------- ^ | | Preallocate one data extent | | at bytenr X, len 1M | v | ^ Commit transaction | | Now extent [X, X+1M) is in | v commit root | ================== Dev replace starts ========================= | ^ | | Scrub extent [X, X+1M) | | Read [X, X+1M) | | (The content are mostly garbage | | since it's preallocated) ^ | v | Write back happens for | | extent [X, X+512K) | | New data writes to both | | source and target dev. | v | | ^ | | Scrub writes back extent [X, X+1M) | | to target device. | | This will over write the new data in | | [X, X+512K) | v This race can only happen for nocow writes. Thus metadata and data cow writes are safe, as COW will never overwrite extents of previous transaction (in commit root). This behavior can be confirmed by disabling all fallocate related calls in fsstress (*), then all related tests can pass a 2000 run loop. *: FSSTRESS_AVOID="-f fallocate=0 -f allocsp=0 -f zero=0 -f insert=0 \ -f collapse=0 -f punch=0 -f resvsp=0" I didn't expect resvsp ioctl will fallback to fallocate in VFS... [FIX] Make dev-replace to require mandatory block group RO, and wait for current nocow writes before calling scrub_chunk(). This patch will mostly revert commit 76a8efa171bf ("btrfs: Continue replace when set_block_ro failed") for dev-replace path. The side effect is, dev-replace can be more strict on avaialble space, but definitely worth to avoid data corruption. Reported-by: Filipe Manana <fdmanana@suse.com> Fixes: 76a8efa171bf ("btrfs: Continue replace when set_block_ro failed") Fixes: b12de52896c0 ("btrfs: scrub: Don't check free space before marking a block group RO") Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Qu Wenruo <wqu@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2020-01-23 23:58:20 +00:00
*
* While for dev replace, we need to try our best to mark block
* group RO, to prevent race between:
* - Write duplication
* Contains latest data
* - Scrub copy
* Contains data from commit tree
*
* If target block group is not marked RO, nocow writes can
* be overwritten by scrub copy, causing data corruption.
* So for dev-replace, it's not allowed to continue if a block
* group is not RO.
btrfs: scrub: Don't check free space before marking a block group RO [BUG] When running btrfs/072 with only one online CPU, it has a pretty high chance to fail: btrfs/072 12s ... _check_dmesg: something found in dmesg (see xfstests-dev/results//btrfs/072.dmesg) - output mismatch (see xfstests-dev/results//btrfs/072.out.bad) --- tests/btrfs/072.out 2019-10-22 15:18:14.008965340 +0800 +++ /xfstests-dev/results//btrfs/072.out.bad 2019-11-14 15:56:45.877152240 +0800 @@ -1,2 +1,3 @@ QA output created by 072 Silence is golden +Scrub find errors in "-m dup -d single" test ... And with the following call trace: BTRFS info (device dm-5): scrub: started on devid 1 ------------[ cut here ]------------ BTRFS: Transaction aborted (error -27) WARNING: CPU: 0 PID: 55087 at fs/btrfs/block-group.c:1890 btrfs_create_pending_block_groups+0x3e6/0x470 [btrfs] CPU: 0 PID: 55087 Comm: btrfs Tainted: G W O 5.4.0-rc1-custom+ #13 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015 RIP: 0010:btrfs_create_pending_block_groups+0x3e6/0x470 [btrfs] Call Trace: __btrfs_end_transaction+0xdb/0x310 [btrfs] btrfs_end_transaction+0x10/0x20 [btrfs] btrfs_inc_block_group_ro+0x1c9/0x210 [btrfs] scrub_enumerate_chunks+0x264/0x940 [btrfs] btrfs_scrub_dev+0x45c/0x8f0 [btrfs] btrfs_ioctl+0x31a1/0x3fb0 [btrfs] do_vfs_ioctl+0x636/0xaa0 ksys_ioctl+0x67/0x90 __x64_sys_ioctl+0x43/0x50 do_syscall_64+0x79/0xe0 entry_SYSCALL_64_after_hwframe+0x49/0xbe ---[ end trace 166c865cec7688e7 ]--- [CAUSE] The error number -27 is -EFBIG, returned from the following call chain: btrfs_end_transaction() |- __btrfs_end_transaction() |- btrfs_create_pending_block_groups() |- btrfs_finish_chunk_alloc() |- btrfs_add_system_chunk() This happens because we have used up all space of btrfs_super_block::sys_chunk_array. The root cause is, we have the following bad loop of creating tons of system chunks: 1. The only SYSTEM chunk is being scrubbed It's very common to have only one SYSTEM chunk. 2. New SYSTEM bg will be allocated As btrfs_inc_block_group_ro() will check if we have enough space after marking current bg RO. If not, then allocate a new chunk. 3. New SYSTEM bg is still empty, will be reclaimed During the reclaim, we will mark it RO again. 4. That newly allocated empty SYSTEM bg get scrubbed We go back to step 2, as the bg is already mark RO but still not cleaned up yet. If the cleaner kthread doesn't get executed fast enough (e.g. only one CPU), then we will get more and more empty SYSTEM chunks, using up all the space of btrfs_super_block::sys_chunk_array. [FIX] Since scrub/dev-replace doesn't always need to allocate new extent, especially chunk tree extent, so we don't really need to do chunk pre-allocation. To break above spiral, here we introduce a new parameter to btrfs_inc_block_group(), @do_chunk_alloc, which indicates whether we need extra chunk pre-allocation. For relocation, we pass @do_chunk_alloc=true, while for scrub, we pass @do_chunk_alloc=false. This should keep unnecessary empty chunks from popping up for scrub. Also, since there are two parameters for btrfs_inc_block_group_ro(), add more comment for it. Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Qu Wenruo <wqu@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2019-11-15 02:09:00 +00:00
*/
btrfs: scrub: Require mandatory block group RO for dev-replace [BUG] For dev-replace test cases with fsstress, like btrfs/06[45] btrfs/071, looped runs can lead to random failure, where scrub finds csum error. The possibility is not high, around 1/20 to 1/100, but it's causing data corruption. The bug is observable after commit b12de52896c0 ("btrfs: scrub: Don't check free space before marking a block group RO") [CAUSE] Dev-replace has two source of writes: - Write duplication All writes to source device will also be duplicated to target device. Content: Not yet persisted data/meta - Scrub copy Dev-replace reused scrub code to iterate through existing extents, and copy the verified data to target device. Content: Previously persisted data and metadata The difference in contents makes the following race possible: Regular Writer | Dev-replace ----------------------------------------------------------------- ^ | | Preallocate one data extent | | at bytenr X, len 1M | v | ^ Commit transaction | | Now extent [X, X+1M) is in | v commit root | ================== Dev replace starts ========================= | ^ | | Scrub extent [X, X+1M) | | Read [X, X+1M) | | (The content are mostly garbage | | since it's preallocated) ^ | v | Write back happens for | | extent [X, X+512K) | | New data writes to both | | source and target dev. | v | | ^ | | Scrub writes back extent [X, X+1M) | | to target device. | | This will over write the new data in | | [X, X+512K) | v This race can only happen for nocow writes. Thus metadata and data cow writes are safe, as COW will never overwrite extents of previous transaction (in commit root). This behavior can be confirmed by disabling all fallocate related calls in fsstress (*), then all related tests can pass a 2000 run loop. *: FSSTRESS_AVOID="-f fallocate=0 -f allocsp=0 -f zero=0 -f insert=0 \ -f collapse=0 -f punch=0 -f resvsp=0" I didn't expect resvsp ioctl will fallback to fallocate in VFS... [FIX] Make dev-replace to require mandatory block group RO, and wait for current nocow writes before calling scrub_chunk(). This patch will mostly revert commit 76a8efa171bf ("btrfs: Continue replace when set_block_ro failed") for dev-replace path. The side effect is, dev-replace can be more strict on avaialble space, but definitely worth to avoid data corruption. Reported-by: Filipe Manana <fdmanana@suse.com> Fixes: 76a8efa171bf ("btrfs: Continue replace when set_block_ro failed") Fixes: b12de52896c0 ("btrfs: scrub: Don't check free space before marking a block group RO") Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Qu Wenruo <wqu@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2020-01-23 23:58:20 +00:00
ret = btrfs_inc_block_group_ro(cache, sctx->is_dev_replace);
if (!ret && sctx->is_dev_replace) {
ret = finish_extent_writes_for_zoned(root, cache);
if (ret) {
btrfs_dec_block_group_ro(cache);
scrub_pause_off(fs_info);
btrfs_put_block_group(cache);
break;
}
}
btrfs: Continue replace when set_block_ro failed xfstests/011 failed in node with small_size filesystem. Can be reproduced by following script: DEV_LIST="/dev/vdd /dev/vde" DEV_REPLACE="/dev/vdf" do_test() { local mkfs_opt="$1" local size="$2" dmesg -c >/dev/null umount $SCRATCH_MNT &>/dev/null echo mkfs.btrfs -f $mkfs_opt "${DEV_LIST[*]}" mkfs.btrfs -f $mkfs_opt "${DEV_LIST[@]}" || return 1 mount "${DEV_LIST[0]}" $SCRATCH_MNT echo -n "Writing big files" dd if=/dev/urandom of=$SCRATCH_MNT/t0 bs=1M count=1 >/dev/null 2>&1 for ((i = 1; i <= size; i++)); do echo -n . /bin/cp $SCRATCH_MNT/t0 $SCRATCH_MNT/t$i || return 1 done echo echo Start replace btrfs replace start -Bf "${DEV_LIST[0]}" "$DEV_REPLACE" $SCRATCH_MNT || { dmesg return 1 } return 0 } # Set size to value near fs size # for example, 1897 can trigger this bug in 2.6G device. # ./do_test "-d raid1 -m raid1" 1897 System will report replace fail with following warning in dmesg: [ 134.710853] BTRFS: dev_replace from /dev/vdd (devid 1) to /dev/vdf started [ 135.542390] BTRFS: btrfs_scrub_dev(/dev/vdd, 1, /dev/vdf) failed -28 [ 135.543505] ------------[ cut here ]------------ [ 135.544127] WARNING: CPU: 0 PID: 4080 at fs/btrfs/dev-replace.c:428 btrfs_dev_replace_start+0x398/0x440() [ 135.545276] Modules linked in: [ 135.545681] CPU: 0 PID: 4080 Comm: btrfs Not tainted 4.3.0 #256 [ 135.546439] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.8.2-0-g33fbe13 by qemu-project.org 04/01/2014 [ 135.547798] ffffffff81c5bfcf ffff88003cbb3d28 ffffffff817fe7b5 0000000000000000 [ 135.548774] ffff88003cbb3d60 ffffffff810a88f1 ffff88002b030000 00000000ffffffe4 [ 135.549774] ffff88003c080000 ffff88003c082588 ffff88003c28ab60 ffff88003cbb3d70 [ 135.550758] Call Trace: [ 135.551086] [<ffffffff817fe7b5>] dump_stack+0x44/0x55 [ 135.551737] [<ffffffff810a88f1>] warn_slowpath_common+0x81/0xc0 [ 135.552487] [<ffffffff810a89e5>] warn_slowpath_null+0x15/0x20 [ 135.553211] [<ffffffff81448c88>] btrfs_dev_replace_start+0x398/0x440 [ 135.554051] [<ffffffff81412c3e>] btrfs_ioctl+0x1d2e/0x25c0 [ 135.554722] [<ffffffff8114c7ba>] ? __audit_syscall_entry+0xaa/0xf0 [ 135.555506] [<ffffffff8111ab36>] ? current_kernel_time64+0x56/0xa0 [ 135.556304] [<ffffffff81201e3d>] do_vfs_ioctl+0x30d/0x580 [ 135.557009] [<ffffffff8114c7ba>] ? __audit_syscall_entry+0xaa/0xf0 [ 135.557855] [<ffffffff810011d1>] ? do_audit_syscall_entry+0x61/0x70 [ 135.558669] [<ffffffff8120d1c1>] ? __fget_light+0x61/0x90 [ 135.559374] [<ffffffff81202124>] SyS_ioctl+0x74/0x80 [ 135.559987] [<ffffffff81809857>] entry_SYSCALL_64_fastpath+0x12/0x6f [ 135.560842] ---[ end trace 2a5c1fc3205abbdd ]--- Reason: When big data writen to fs, the whole free space will be allocated for data chunk. And operation as scrub need to set_block_ro(), and when there is only one metadata chunk in system(or other metadata chunks are all full), the function will try to allocate a new chunk, and failed because no space in device. Fix: When set_block_ro failed for metadata chunk, it is not a problem because scrub_lock paused commit_trancaction in same time, and metadata are always cowed, so the on-the-fly writepages will not write data into same place with scrub/replace. Let replace continue in this case is no problem. Tested by above script, and xfstests/011, plus 100 times xfstests/070. Changelog v1->v2: 1: Add detail comments in source and commit-message. 2: Add dmesg detail into commit-message. 3: Limit return value of -ENOSPC to be passed. All suggested by: Filipe Manana <fdmanana@gmail.com> Suggested-by: Filipe Manana <fdmanana@gmail.com> Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com> Signed-off-by: Chris Mason <clm@fb.com>
2015-11-17 10:46:17 +00:00
if (ret == 0) {
ro_set = 1;
} else if (ret == -ENOSPC && !sctx->is_dev_replace &&
!(cache->flags & BTRFS_BLOCK_GROUP_RAID56_MASK)) {
btrfs: Continue replace when set_block_ro failed xfstests/011 failed in node with small_size filesystem. Can be reproduced by following script: DEV_LIST="/dev/vdd /dev/vde" DEV_REPLACE="/dev/vdf" do_test() { local mkfs_opt="$1" local size="$2" dmesg -c >/dev/null umount $SCRATCH_MNT &>/dev/null echo mkfs.btrfs -f $mkfs_opt "${DEV_LIST[*]}" mkfs.btrfs -f $mkfs_opt "${DEV_LIST[@]}" || return 1 mount "${DEV_LIST[0]}" $SCRATCH_MNT echo -n "Writing big files" dd if=/dev/urandom of=$SCRATCH_MNT/t0 bs=1M count=1 >/dev/null 2>&1 for ((i = 1; i <= size; i++)); do echo -n . /bin/cp $SCRATCH_MNT/t0 $SCRATCH_MNT/t$i || return 1 done echo echo Start replace btrfs replace start -Bf "${DEV_LIST[0]}" "$DEV_REPLACE" $SCRATCH_MNT || { dmesg return 1 } return 0 } # Set size to value near fs size # for example, 1897 can trigger this bug in 2.6G device. # ./do_test "-d raid1 -m raid1" 1897 System will report replace fail with following warning in dmesg: [ 134.710853] BTRFS: dev_replace from /dev/vdd (devid 1) to /dev/vdf started [ 135.542390] BTRFS: btrfs_scrub_dev(/dev/vdd, 1, /dev/vdf) failed -28 [ 135.543505] ------------[ cut here ]------------ [ 135.544127] WARNING: CPU: 0 PID: 4080 at fs/btrfs/dev-replace.c:428 btrfs_dev_replace_start+0x398/0x440() [ 135.545276] Modules linked in: [ 135.545681] CPU: 0 PID: 4080 Comm: btrfs Not tainted 4.3.0 #256 [ 135.546439] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.8.2-0-g33fbe13 by qemu-project.org 04/01/2014 [ 135.547798] ffffffff81c5bfcf ffff88003cbb3d28 ffffffff817fe7b5 0000000000000000 [ 135.548774] ffff88003cbb3d60 ffffffff810a88f1 ffff88002b030000 00000000ffffffe4 [ 135.549774] ffff88003c080000 ffff88003c082588 ffff88003c28ab60 ffff88003cbb3d70 [ 135.550758] Call Trace: [ 135.551086] [<ffffffff817fe7b5>] dump_stack+0x44/0x55 [ 135.551737] [<ffffffff810a88f1>] warn_slowpath_common+0x81/0xc0 [ 135.552487] [<ffffffff810a89e5>] warn_slowpath_null+0x15/0x20 [ 135.553211] [<ffffffff81448c88>] btrfs_dev_replace_start+0x398/0x440 [ 135.554051] [<ffffffff81412c3e>] btrfs_ioctl+0x1d2e/0x25c0 [ 135.554722] [<ffffffff8114c7ba>] ? __audit_syscall_entry+0xaa/0xf0 [ 135.555506] [<ffffffff8111ab36>] ? current_kernel_time64+0x56/0xa0 [ 135.556304] [<ffffffff81201e3d>] do_vfs_ioctl+0x30d/0x580 [ 135.557009] [<ffffffff8114c7ba>] ? __audit_syscall_entry+0xaa/0xf0 [ 135.557855] [<ffffffff810011d1>] ? do_audit_syscall_entry+0x61/0x70 [ 135.558669] [<ffffffff8120d1c1>] ? __fget_light+0x61/0x90 [ 135.559374] [<ffffffff81202124>] SyS_ioctl+0x74/0x80 [ 135.559987] [<ffffffff81809857>] entry_SYSCALL_64_fastpath+0x12/0x6f [ 135.560842] ---[ end trace 2a5c1fc3205abbdd ]--- Reason: When big data writen to fs, the whole free space will be allocated for data chunk. And operation as scrub need to set_block_ro(), and when there is only one metadata chunk in system(or other metadata chunks are all full), the function will try to allocate a new chunk, and failed because no space in device. Fix: When set_block_ro failed for metadata chunk, it is not a problem because scrub_lock paused commit_trancaction in same time, and metadata are always cowed, so the on-the-fly writepages will not write data into same place with scrub/replace. Let replace continue in this case is no problem. Tested by above script, and xfstests/011, plus 100 times xfstests/070. Changelog v1->v2: 1: Add detail comments in source and commit-message. 2: Add dmesg detail into commit-message. 3: Limit return value of -ENOSPC to be passed. All suggested by: Filipe Manana <fdmanana@gmail.com> Suggested-by: Filipe Manana <fdmanana@gmail.com> Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com> Signed-off-by: Chris Mason <clm@fb.com>
2015-11-17 10:46:17 +00:00
/*
* btrfs_inc_block_group_ro return -ENOSPC when it
* failed in creating new chunk for metadata.
btrfs: scrub: Require mandatory block group RO for dev-replace [BUG] For dev-replace test cases with fsstress, like btrfs/06[45] btrfs/071, looped runs can lead to random failure, where scrub finds csum error. The possibility is not high, around 1/20 to 1/100, but it's causing data corruption. The bug is observable after commit b12de52896c0 ("btrfs: scrub: Don't check free space before marking a block group RO") [CAUSE] Dev-replace has two source of writes: - Write duplication All writes to source device will also be duplicated to target device. Content: Not yet persisted data/meta - Scrub copy Dev-replace reused scrub code to iterate through existing extents, and copy the verified data to target device. Content: Previously persisted data and metadata The difference in contents makes the following race possible: Regular Writer | Dev-replace ----------------------------------------------------------------- ^ | | Preallocate one data extent | | at bytenr X, len 1M | v | ^ Commit transaction | | Now extent [X, X+1M) is in | v commit root | ================== Dev replace starts ========================= | ^ | | Scrub extent [X, X+1M) | | Read [X, X+1M) | | (The content are mostly garbage | | since it's preallocated) ^ | v | Write back happens for | | extent [X, X+512K) | | New data writes to both | | source and target dev. | v | | ^ | | Scrub writes back extent [X, X+1M) | | to target device. | | This will over write the new data in | | [X, X+512K) | v This race can only happen for nocow writes. Thus metadata and data cow writes are safe, as COW will never overwrite extents of previous transaction (in commit root). This behavior can be confirmed by disabling all fallocate related calls in fsstress (*), then all related tests can pass a 2000 run loop. *: FSSTRESS_AVOID="-f fallocate=0 -f allocsp=0 -f zero=0 -f insert=0 \ -f collapse=0 -f punch=0 -f resvsp=0" I didn't expect resvsp ioctl will fallback to fallocate in VFS... [FIX] Make dev-replace to require mandatory block group RO, and wait for current nocow writes before calling scrub_chunk(). This patch will mostly revert commit 76a8efa171bf ("btrfs: Continue replace when set_block_ro failed") for dev-replace path. The side effect is, dev-replace can be more strict on avaialble space, but definitely worth to avoid data corruption. Reported-by: Filipe Manana <fdmanana@suse.com> Fixes: 76a8efa171bf ("btrfs: Continue replace when set_block_ro failed") Fixes: b12de52896c0 ("btrfs: scrub: Don't check free space before marking a block group RO") Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Qu Wenruo <wqu@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2020-01-23 23:58:20 +00:00
* It is not a problem for scrub, because
btrfs: Continue replace when set_block_ro failed xfstests/011 failed in node with small_size filesystem. Can be reproduced by following script: DEV_LIST="/dev/vdd /dev/vde" DEV_REPLACE="/dev/vdf" do_test() { local mkfs_opt="$1" local size="$2" dmesg -c >/dev/null umount $SCRATCH_MNT &>/dev/null echo mkfs.btrfs -f $mkfs_opt "${DEV_LIST[*]}" mkfs.btrfs -f $mkfs_opt "${DEV_LIST[@]}" || return 1 mount "${DEV_LIST[0]}" $SCRATCH_MNT echo -n "Writing big files" dd if=/dev/urandom of=$SCRATCH_MNT/t0 bs=1M count=1 >/dev/null 2>&1 for ((i = 1; i <= size; i++)); do echo -n . /bin/cp $SCRATCH_MNT/t0 $SCRATCH_MNT/t$i || return 1 done echo echo Start replace btrfs replace start -Bf "${DEV_LIST[0]}" "$DEV_REPLACE" $SCRATCH_MNT || { dmesg return 1 } return 0 } # Set size to value near fs size # for example, 1897 can trigger this bug in 2.6G device. # ./do_test "-d raid1 -m raid1" 1897 System will report replace fail with following warning in dmesg: [ 134.710853] BTRFS: dev_replace from /dev/vdd (devid 1) to /dev/vdf started [ 135.542390] BTRFS: btrfs_scrub_dev(/dev/vdd, 1, /dev/vdf) failed -28 [ 135.543505] ------------[ cut here ]------------ [ 135.544127] WARNING: CPU: 0 PID: 4080 at fs/btrfs/dev-replace.c:428 btrfs_dev_replace_start+0x398/0x440() [ 135.545276] Modules linked in: [ 135.545681] CPU: 0 PID: 4080 Comm: btrfs Not tainted 4.3.0 #256 [ 135.546439] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.8.2-0-g33fbe13 by qemu-project.org 04/01/2014 [ 135.547798] ffffffff81c5bfcf ffff88003cbb3d28 ffffffff817fe7b5 0000000000000000 [ 135.548774] ffff88003cbb3d60 ffffffff810a88f1 ffff88002b030000 00000000ffffffe4 [ 135.549774] ffff88003c080000 ffff88003c082588 ffff88003c28ab60 ffff88003cbb3d70 [ 135.550758] Call Trace: [ 135.551086] [<ffffffff817fe7b5>] dump_stack+0x44/0x55 [ 135.551737] [<ffffffff810a88f1>] warn_slowpath_common+0x81/0xc0 [ 135.552487] [<ffffffff810a89e5>] warn_slowpath_null+0x15/0x20 [ 135.553211] [<ffffffff81448c88>] btrfs_dev_replace_start+0x398/0x440 [ 135.554051] [<ffffffff81412c3e>] btrfs_ioctl+0x1d2e/0x25c0 [ 135.554722] [<ffffffff8114c7ba>] ? __audit_syscall_entry+0xaa/0xf0 [ 135.555506] [<ffffffff8111ab36>] ? current_kernel_time64+0x56/0xa0 [ 135.556304] [<ffffffff81201e3d>] do_vfs_ioctl+0x30d/0x580 [ 135.557009] [<ffffffff8114c7ba>] ? __audit_syscall_entry+0xaa/0xf0 [ 135.557855] [<ffffffff810011d1>] ? do_audit_syscall_entry+0x61/0x70 [ 135.558669] [<ffffffff8120d1c1>] ? __fget_light+0x61/0x90 [ 135.559374] [<ffffffff81202124>] SyS_ioctl+0x74/0x80 [ 135.559987] [<ffffffff81809857>] entry_SYSCALL_64_fastpath+0x12/0x6f [ 135.560842] ---[ end trace 2a5c1fc3205abbdd ]--- Reason: When big data writen to fs, the whole free space will be allocated for data chunk. And operation as scrub need to set_block_ro(), and when there is only one metadata chunk in system(or other metadata chunks are all full), the function will try to allocate a new chunk, and failed because no space in device. Fix: When set_block_ro failed for metadata chunk, it is not a problem because scrub_lock paused commit_trancaction in same time, and metadata are always cowed, so the on-the-fly writepages will not write data into same place with scrub/replace. Let replace continue in this case is no problem. Tested by above script, and xfstests/011, plus 100 times xfstests/070. Changelog v1->v2: 1: Add detail comments in source and commit-message. 2: Add dmesg detail into commit-message. 3: Limit return value of -ENOSPC to be passed. All suggested by: Filipe Manana <fdmanana@gmail.com> Suggested-by: Filipe Manana <fdmanana@gmail.com> Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com> Signed-off-by: Chris Mason <clm@fb.com>
2015-11-17 10:46:17 +00:00
* metadata are always cowed, and our scrub paused
* commit_transactions.
*
* For RAID56 chunks, we have to mark them read-only
* for scrub, as later we would use our own cache
* out of RAID56 realm.
* Thus we want the RAID56 bg to be marked RO to
* prevent RMW from screwing up out cache.
btrfs: Continue replace when set_block_ro failed xfstests/011 failed in node with small_size filesystem. Can be reproduced by following script: DEV_LIST="/dev/vdd /dev/vde" DEV_REPLACE="/dev/vdf" do_test() { local mkfs_opt="$1" local size="$2" dmesg -c >/dev/null umount $SCRATCH_MNT &>/dev/null echo mkfs.btrfs -f $mkfs_opt "${DEV_LIST[*]}" mkfs.btrfs -f $mkfs_opt "${DEV_LIST[@]}" || return 1 mount "${DEV_LIST[0]}" $SCRATCH_MNT echo -n "Writing big files" dd if=/dev/urandom of=$SCRATCH_MNT/t0 bs=1M count=1 >/dev/null 2>&1 for ((i = 1; i <= size; i++)); do echo -n . /bin/cp $SCRATCH_MNT/t0 $SCRATCH_MNT/t$i || return 1 done echo echo Start replace btrfs replace start -Bf "${DEV_LIST[0]}" "$DEV_REPLACE" $SCRATCH_MNT || { dmesg return 1 } return 0 } # Set size to value near fs size # for example, 1897 can trigger this bug in 2.6G device. # ./do_test "-d raid1 -m raid1" 1897 System will report replace fail with following warning in dmesg: [ 134.710853] BTRFS: dev_replace from /dev/vdd (devid 1) to /dev/vdf started [ 135.542390] BTRFS: btrfs_scrub_dev(/dev/vdd, 1, /dev/vdf) failed -28 [ 135.543505] ------------[ cut here ]------------ [ 135.544127] WARNING: CPU: 0 PID: 4080 at fs/btrfs/dev-replace.c:428 btrfs_dev_replace_start+0x398/0x440() [ 135.545276] Modules linked in: [ 135.545681] CPU: 0 PID: 4080 Comm: btrfs Not tainted 4.3.0 #256 [ 135.546439] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.8.2-0-g33fbe13 by qemu-project.org 04/01/2014 [ 135.547798] ffffffff81c5bfcf ffff88003cbb3d28 ffffffff817fe7b5 0000000000000000 [ 135.548774] ffff88003cbb3d60 ffffffff810a88f1 ffff88002b030000 00000000ffffffe4 [ 135.549774] ffff88003c080000 ffff88003c082588 ffff88003c28ab60 ffff88003cbb3d70 [ 135.550758] Call Trace: [ 135.551086] [<ffffffff817fe7b5>] dump_stack+0x44/0x55 [ 135.551737] [<ffffffff810a88f1>] warn_slowpath_common+0x81/0xc0 [ 135.552487] [<ffffffff810a89e5>] warn_slowpath_null+0x15/0x20 [ 135.553211] [<ffffffff81448c88>] btrfs_dev_replace_start+0x398/0x440 [ 135.554051] [<ffffffff81412c3e>] btrfs_ioctl+0x1d2e/0x25c0 [ 135.554722] [<ffffffff8114c7ba>] ? __audit_syscall_entry+0xaa/0xf0 [ 135.555506] [<ffffffff8111ab36>] ? current_kernel_time64+0x56/0xa0 [ 135.556304] [<ffffffff81201e3d>] do_vfs_ioctl+0x30d/0x580 [ 135.557009] [<ffffffff8114c7ba>] ? __audit_syscall_entry+0xaa/0xf0 [ 135.557855] [<ffffffff810011d1>] ? do_audit_syscall_entry+0x61/0x70 [ 135.558669] [<ffffffff8120d1c1>] ? __fget_light+0x61/0x90 [ 135.559374] [<ffffffff81202124>] SyS_ioctl+0x74/0x80 [ 135.559987] [<ffffffff81809857>] entry_SYSCALL_64_fastpath+0x12/0x6f [ 135.560842] ---[ end trace 2a5c1fc3205abbdd ]--- Reason: When big data writen to fs, the whole free space will be allocated for data chunk. And operation as scrub need to set_block_ro(), and when there is only one metadata chunk in system(or other metadata chunks are all full), the function will try to allocate a new chunk, and failed because no space in device. Fix: When set_block_ro failed for metadata chunk, it is not a problem because scrub_lock paused commit_trancaction in same time, and metadata are always cowed, so the on-the-fly writepages will not write data into same place with scrub/replace. Let replace continue in this case is no problem. Tested by above script, and xfstests/011, plus 100 times xfstests/070. Changelog v1->v2: 1: Add detail comments in source and commit-message. 2: Add dmesg detail into commit-message. 3: Limit return value of -ENOSPC to be passed. All suggested by: Filipe Manana <fdmanana@gmail.com> Suggested-by: Filipe Manana <fdmanana@gmail.com> Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com> Signed-off-by: Chris Mason <clm@fb.com>
2015-11-17 10:46:17 +00:00
*/
ro_set = 0;
btrfs: fix race between writes to swap files and scrub When we active a swap file, at btrfs_swap_activate(), we acquire the exclusive operation lock to prevent the physical location of the swap file extents to be changed by operations such as balance and device replace/resize/remove. We also call there can_nocow_extent() which, among other things, checks if the block group of a swap file extent is currently RO, and if it is we can not use the extent, since a write into it would result in COWing the extent. However we have no protection against a scrub operation running after we activate the swap file, which can result in the swap file extents to be COWed while the scrub is running and operating on the respective block group, because scrub turns a block group into RO before it processes it and then back again to RW mode after processing it. That means an attempt to write into a swap file extent while scrub is processing the respective block group, will result in COWing the extent, changing its physical location on disk. Fix this by making sure that block groups that have extents that are used by active swap files can not be turned into RO mode, therefore making it not possible for a scrub to turn them into RO mode. When a scrub finds a block group that can not be turned to RO due to the existence of extents used by swap files, it proceeds to the next block group and logs a warning message that mentions the block group was skipped due to active swap files - this is the same approach we currently use for balance. Fixes: ed46ff3d42378 ("Btrfs: support swap files") CC: stable@vger.kernel.org # 5.4+ Reviewed-by: Anand Jain <anand.jain@oracle.com> Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2021-02-05 12:55:37 +00:00
} else if (ret == -ETXTBSY) {
btrfs_warn(fs_info,
"skipping scrub of block group %llu due to active swapfile",
cache->start);
scrub_pause_off(fs_info);
ret = 0;
goto skip_unfreeze;
btrfs: Continue replace when set_block_ro failed xfstests/011 failed in node with small_size filesystem. Can be reproduced by following script: DEV_LIST="/dev/vdd /dev/vde" DEV_REPLACE="/dev/vdf" do_test() { local mkfs_opt="$1" local size="$2" dmesg -c >/dev/null umount $SCRATCH_MNT &>/dev/null echo mkfs.btrfs -f $mkfs_opt "${DEV_LIST[*]}" mkfs.btrfs -f $mkfs_opt "${DEV_LIST[@]}" || return 1 mount "${DEV_LIST[0]}" $SCRATCH_MNT echo -n "Writing big files" dd if=/dev/urandom of=$SCRATCH_MNT/t0 bs=1M count=1 >/dev/null 2>&1 for ((i = 1; i <= size; i++)); do echo -n . /bin/cp $SCRATCH_MNT/t0 $SCRATCH_MNT/t$i || return 1 done echo echo Start replace btrfs replace start -Bf "${DEV_LIST[0]}" "$DEV_REPLACE" $SCRATCH_MNT || { dmesg return 1 } return 0 } # Set size to value near fs size # for example, 1897 can trigger this bug in 2.6G device. # ./do_test "-d raid1 -m raid1" 1897 System will report replace fail with following warning in dmesg: [ 134.710853] BTRFS: dev_replace from /dev/vdd (devid 1) to /dev/vdf started [ 135.542390] BTRFS: btrfs_scrub_dev(/dev/vdd, 1, /dev/vdf) failed -28 [ 135.543505] ------------[ cut here ]------------ [ 135.544127] WARNING: CPU: 0 PID: 4080 at fs/btrfs/dev-replace.c:428 btrfs_dev_replace_start+0x398/0x440() [ 135.545276] Modules linked in: [ 135.545681] CPU: 0 PID: 4080 Comm: btrfs Not tainted 4.3.0 #256 [ 135.546439] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.8.2-0-g33fbe13 by qemu-project.org 04/01/2014 [ 135.547798] ffffffff81c5bfcf ffff88003cbb3d28 ffffffff817fe7b5 0000000000000000 [ 135.548774] ffff88003cbb3d60 ffffffff810a88f1 ffff88002b030000 00000000ffffffe4 [ 135.549774] ffff88003c080000 ffff88003c082588 ffff88003c28ab60 ffff88003cbb3d70 [ 135.550758] Call Trace: [ 135.551086] [<ffffffff817fe7b5>] dump_stack+0x44/0x55 [ 135.551737] [<ffffffff810a88f1>] warn_slowpath_common+0x81/0xc0 [ 135.552487] [<ffffffff810a89e5>] warn_slowpath_null+0x15/0x20 [ 135.553211] [<ffffffff81448c88>] btrfs_dev_replace_start+0x398/0x440 [ 135.554051] [<ffffffff81412c3e>] btrfs_ioctl+0x1d2e/0x25c0 [ 135.554722] [<ffffffff8114c7ba>] ? __audit_syscall_entry+0xaa/0xf0 [ 135.555506] [<ffffffff8111ab36>] ? current_kernel_time64+0x56/0xa0 [ 135.556304] [<ffffffff81201e3d>] do_vfs_ioctl+0x30d/0x580 [ 135.557009] [<ffffffff8114c7ba>] ? __audit_syscall_entry+0xaa/0xf0 [ 135.557855] [<ffffffff810011d1>] ? do_audit_syscall_entry+0x61/0x70 [ 135.558669] [<ffffffff8120d1c1>] ? __fget_light+0x61/0x90 [ 135.559374] [<ffffffff81202124>] SyS_ioctl+0x74/0x80 [ 135.559987] [<ffffffff81809857>] entry_SYSCALL_64_fastpath+0x12/0x6f [ 135.560842] ---[ end trace 2a5c1fc3205abbdd ]--- Reason: When big data writen to fs, the whole free space will be allocated for data chunk. And operation as scrub need to set_block_ro(), and when there is only one metadata chunk in system(or other metadata chunks are all full), the function will try to allocate a new chunk, and failed because no space in device. Fix: When set_block_ro failed for metadata chunk, it is not a problem because scrub_lock paused commit_trancaction in same time, and metadata are always cowed, so the on-the-fly writepages will not write data into same place with scrub/replace. Let replace continue in this case is no problem. Tested by above script, and xfstests/011, plus 100 times xfstests/070. Changelog v1->v2: 1: Add detail comments in source and commit-message. 2: Add dmesg detail into commit-message. 3: Limit return value of -ENOSPC to be passed. All suggested by: Filipe Manana <fdmanana@gmail.com> Suggested-by: Filipe Manana <fdmanana@gmail.com> Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com> Signed-off-by: Chris Mason <clm@fb.com>
2015-11-17 10:46:17 +00:00
} else {
btrfs_warn(fs_info,
"failed setting block group ro: %d", ret);
btrfs_unfreeze_block_group(cache);
btrfs_put_block_group(cache);
btrfs: scrub: Require mandatory block group RO for dev-replace [BUG] For dev-replace test cases with fsstress, like btrfs/06[45] btrfs/071, looped runs can lead to random failure, where scrub finds csum error. The possibility is not high, around 1/20 to 1/100, but it's causing data corruption. The bug is observable after commit b12de52896c0 ("btrfs: scrub: Don't check free space before marking a block group RO") [CAUSE] Dev-replace has two source of writes: - Write duplication All writes to source device will also be duplicated to target device. Content: Not yet persisted data/meta - Scrub copy Dev-replace reused scrub code to iterate through existing extents, and copy the verified data to target device. Content: Previously persisted data and metadata The difference in contents makes the following race possible: Regular Writer | Dev-replace ----------------------------------------------------------------- ^ | | Preallocate one data extent | | at bytenr X, len 1M | v | ^ Commit transaction | | Now extent [X, X+1M) is in | v commit root | ================== Dev replace starts ========================= | ^ | | Scrub extent [X, X+1M) | | Read [X, X+1M) | | (The content are mostly garbage | | since it's preallocated) ^ | v | Write back happens for | | extent [X, X+512K) | | New data writes to both | | source and target dev. | v | | ^ | | Scrub writes back extent [X, X+1M) | | to target device. | | This will over write the new data in | | [X, X+512K) | v This race can only happen for nocow writes. Thus metadata and data cow writes are safe, as COW will never overwrite extents of previous transaction (in commit root). This behavior can be confirmed by disabling all fallocate related calls in fsstress (*), then all related tests can pass a 2000 run loop. *: FSSTRESS_AVOID="-f fallocate=0 -f allocsp=0 -f zero=0 -f insert=0 \ -f collapse=0 -f punch=0 -f resvsp=0" I didn't expect resvsp ioctl will fallback to fallocate in VFS... [FIX] Make dev-replace to require mandatory block group RO, and wait for current nocow writes before calling scrub_chunk(). This patch will mostly revert commit 76a8efa171bf ("btrfs: Continue replace when set_block_ro failed") for dev-replace path. The side effect is, dev-replace can be more strict on avaialble space, but definitely worth to avoid data corruption. Reported-by: Filipe Manana <fdmanana@suse.com> Fixes: 76a8efa171bf ("btrfs: Continue replace when set_block_ro failed") Fixes: b12de52896c0 ("btrfs: scrub: Don't check free space before marking a block group RO") Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Qu Wenruo <wqu@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2020-01-23 23:58:20 +00:00
scrub_pause_off(fs_info);
break;
}
btrfs: scrub: Require mandatory block group RO for dev-replace [BUG] For dev-replace test cases with fsstress, like btrfs/06[45] btrfs/071, looped runs can lead to random failure, where scrub finds csum error. The possibility is not high, around 1/20 to 1/100, but it's causing data corruption. The bug is observable after commit b12de52896c0 ("btrfs: scrub: Don't check free space before marking a block group RO") [CAUSE] Dev-replace has two source of writes: - Write duplication All writes to source device will also be duplicated to target device. Content: Not yet persisted data/meta - Scrub copy Dev-replace reused scrub code to iterate through existing extents, and copy the verified data to target device. Content: Previously persisted data and metadata The difference in contents makes the following race possible: Regular Writer | Dev-replace ----------------------------------------------------------------- ^ | | Preallocate one data extent | | at bytenr X, len 1M | v | ^ Commit transaction | | Now extent [X, X+1M) is in | v commit root | ================== Dev replace starts ========================= | ^ | | Scrub extent [X, X+1M) | | Read [X, X+1M) | | (The content are mostly garbage | | since it's preallocated) ^ | v | Write back happens for | | extent [X, X+512K) | | New data writes to both | | source and target dev. | v | | ^ | | Scrub writes back extent [X, X+1M) | | to target device. | | This will over write the new data in | | [X, X+512K) | v This race can only happen for nocow writes. Thus metadata and data cow writes are safe, as COW will never overwrite extents of previous transaction (in commit root). This behavior can be confirmed by disabling all fallocate related calls in fsstress (*), then all related tests can pass a 2000 run loop. *: FSSTRESS_AVOID="-f fallocate=0 -f allocsp=0 -f zero=0 -f insert=0 \ -f collapse=0 -f punch=0 -f resvsp=0" I didn't expect resvsp ioctl will fallback to fallocate in VFS... [FIX] Make dev-replace to require mandatory block group RO, and wait for current nocow writes before calling scrub_chunk(). This patch will mostly revert commit 76a8efa171bf ("btrfs: Continue replace when set_block_ro failed") for dev-replace path. The side effect is, dev-replace can be more strict on avaialble space, but definitely worth to avoid data corruption. Reported-by: Filipe Manana <fdmanana@suse.com> Fixes: 76a8efa171bf ("btrfs: Continue replace when set_block_ro failed") Fixes: b12de52896c0 ("btrfs: scrub: Don't check free space before marking a block group RO") Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Qu Wenruo <wqu@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2020-01-23 23:58:20 +00:00
/*
* Now the target block is marked RO, wait for nocow writes to
* finish before dev-replace.
* COW is fine, as COW never overwrites extents in commit tree.
*/
if (sctx->is_dev_replace) {
btrfs_wait_nocow_writers(cache);
btrfs_wait_ordered_roots(fs_info, U64_MAX, cache->start,
cache->length);
}
scrub_pause_off(fs_info);
down_write(&dev_replace->rwsem);
dev_replace->cursor_right = found_key.offset + dev_extent_len;
dev_replace->cursor_left = found_key.offset;
dev_replace->item_needs_writeback = 1;
up_write(&dev_replace->rwsem);
ret = scrub_chunk(sctx, cache, scrub_dev, found_key.offset,
dev_extent_len);
btrfs: zoned: mark block groups to copy for device-replace This is the 1/4 patch to support device-replace on zoned filesystems. We have two types of IOs during the device replace process. One is an IO to "copy" (by the scrub functions) all the device extents from the source device to the destination device. The other one is an IO to "clone" (by handle_ops_on_dev_replace()) new incoming write IOs from users to the source device into the target device. Cloning incoming IOs can break the sequential write rule in on target device. When a write is mapped in the middle of a block group, the IO is directed to the middle of a target device zone, which breaks the sequential write requirement. However, the cloning function cannot be disabled since incoming IOs targeting already copied device extents must be cloned so that the IO is executed on the target device. We cannot use dev_replace->cursor_{left,right} to determine whether a bio is going to a not yet copied region. Since we have a time gap between finishing btrfs_scrub_dev() and rewriting the mapping tree in btrfs_dev_replace_finishing(), we can have a newly allocated device extent which is never cloned nor copied. So the point is to copy only already existing device extents. This patch introduces mark_block_group_to_copy() to mark existing block groups as a target of copying. Then, handle_ops_on_dev_replace() and dev-replace can check the flag to do their job. Also, btrfs_finish_block_group_to_copy() will check if the copied stripe is the last stripe in the block group. With the last stripe copied, the to_copy flag is finally disabled. Afterwards we can safely clone incoming IOs on this block group. Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com> Signed-off-by: David Sterba <dsterba@suse.com>
2021-02-04 10:22:11 +00:00
if (sctx->is_dev_replace &&
!btrfs_finish_block_group_to_copy(dev_replace->srcdev,
cache, found_key.offset))
ro_set = 0;
down_write(&dev_replace->rwsem);
dev_replace->cursor_left = dev_replace->cursor_right;
dev_replace->item_needs_writeback = 1;
up_write(&dev_replace->rwsem);
btrfs: Continue replace when set_block_ro failed xfstests/011 failed in node with small_size filesystem. Can be reproduced by following script: DEV_LIST="/dev/vdd /dev/vde" DEV_REPLACE="/dev/vdf" do_test() { local mkfs_opt="$1" local size="$2" dmesg -c >/dev/null umount $SCRATCH_MNT &>/dev/null echo mkfs.btrfs -f $mkfs_opt "${DEV_LIST[*]}" mkfs.btrfs -f $mkfs_opt "${DEV_LIST[@]}" || return 1 mount "${DEV_LIST[0]}" $SCRATCH_MNT echo -n "Writing big files" dd if=/dev/urandom of=$SCRATCH_MNT/t0 bs=1M count=1 >/dev/null 2>&1 for ((i = 1; i <= size; i++)); do echo -n . /bin/cp $SCRATCH_MNT/t0 $SCRATCH_MNT/t$i || return 1 done echo echo Start replace btrfs replace start -Bf "${DEV_LIST[0]}" "$DEV_REPLACE" $SCRATCH_MNT || { dmesg return 1 } return 0 } # Set size to value near fs size # for example, 1897 can trigger this bug in 2.6G device. # ./do_test "-d raid1 -m raid1" 1897 System will report replace fail with following warning in dmesg: [ 134.710853] BTRFS: dev_replace from /dev/vdd (devid 1) to /dev/vdf started [ 135.542390] BTRFS: btrfs_scrub_dev(/dev/vdd, 1, /dev/vdf) failed -28 [ 135.543505] ------------[ cut here ]------------ [ 135.544127] WARNING: CPU: 0 PID: 4080 at fs/btrfs/dev-replace.c:428 btrfs_dev_replace_start+0x398/0x440() [ 135.545276] Modules linked in: [ 135.545681] CPU: 0 PID: 4080 Comm: btrfs Not tainted 4.3.0 #256 [ 135.546439] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.8.2-0-g33fbe13 by qemu-project.org 04/01/2014 [ 135.547798] ffffffff81c5bfcf ffff88003cbb3d28 ffffffff817fe7b5 0000000000000000 [ 135.548774] ffff88003cbb3d60 ffffffff810a88f1 ffff88002b030000 00000000ffffffe4 [ 135.549774] ffff88003c080000 ffff88003c082588 ffff88003c28ab60 ffff88003cbb3d70 [ 135.550758] Call Trace: [ 135.551086] [<ffffffff817fe7b5>] dump_stack+0x44/0x55 [ 135.551737] [<ffffffff810a88f1>] warn_slowpath_common+0x81/0xc0 [ 135.552487] [<ffffffff810a89e5>] warn_slowpath_null+0x15/0x20 [ 135.553211] [<ffffffff81448c88>] btrfs_dev_replace_start+0x398/0x440 [ 135.554051] [<ffffffff81412c3e>] btrfs_ioctl+0x1d2e/0x25c0 [ 135.554722] [<ffffffff8114c7ba>] ? __audit_syscall_entry+0xaa/0xf0 [ 135.555506] [<ffffffff8111ab36>] ? current_kernel_time64+0x56/0xa0 [ 135.556304] [<ffffffff81201e3d>] do_vfs_ioctl+0x30d/0x580 [ 135.557009] [<ffffffff8114c7ba>] ? __audit_syscall_entry+0xaa/0xf0 [ 135.557855] [<ffffffff810011d1>] ? do_audit_syscall_entry+0x61/0x70 [ 135.558669] [<ffffffff8120d1c1>] ? __fget_light+0x61/0x90 [ 135.559374] [<ffffffff81202124>] SyS_ioctl+0x74/0x80 [ 135.559987] [<ffffffff81809857>] entry_SYSCALL_64_fastpath+0x12/0x6f [ 135.560842] ---[ end trace 2a5c1fc3205abbdd ]--- Reason: When big data writen to fs, the whole free space will be allocated for data chunk. And operation as scrub need to set_block_ro(), and when there is only one metadata chunk in system(or other metadata chunks are all full), the function will try to allocate a new chunk, and failed because no space in device. Fix: When set_block_ro failed for metadata chunk, it is not a problem because scrub_lock paused commit_trancaction in same time, and metadata are always cowed, so the on-the-fly writepages will not write data into same place with scrub/replace. Let replace continue in this case is no problem. Tested by above script, and xfstests/011, plus 100 times xfstests/070. Changelog v1->v2: 1: Add detail comments in source and commit-message. 2: Add dmesg detail into commit-message. 3: Limit return value of -ENOSPC to be passed. All suggested by: Filipe Manana <fdmanana@gmail.com> Suggested-by: Filipe Manana <fdmanana@gmail.com> Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com> Signed-off-by: Chris Mason <clm@fb.com>
2015-11-17 10:46:17 +00:00
if (ro_set)
btrfs_dec_block_group_ro(cache);
/*
* We might have prevented the cleaner kthread from deleting
* this block group if it was already unused because we raced
* and set it to RO mode first. So add it back to the unused
* list, otherwise it might not ever be deleted unless a manual
* balance is triggered or it becomes used and unused again.
*/
spin_lock(&cache->lock);
if (!test_bit(BLOCK_GROUP_FLAG_REMOVED, &cache->runtime_flags) &&
!cache->ro && cache->reserved == 0 && cache->used == 0) {
spin_unlock(&cache->lock);
btrfs: handle empty block_group removal for async discard block_group removal is a little tricky. It can race with the extent allocator, the cleaner thread, and balancing. The current path is for a block_group to be added to the unused_bgs list. Then, when the cleaner thread comes around, it starts a transaction and then proceeds with removing the block_group. Extents that are pinned are subsequently removed from the pinned trees and then eventually a discard is issued for the entire block_group. Async discard introduces another player into the game, the discard workqueue. While it has none of the racing issues, the new problem is ensuring we don't leave free space untrimmed prior to forgetting the block_group. This is handled by placing fully free block_groups on a separate discard queue. This is necessary to maintain discarding order as in the future we will slowly trim even fully free block_groups. The ordering helps us make progress on the same block_group rather than say the last fully freed block_group or needing to search through the fully freed block groups at the beginning of a list and insert after. The new order of events is a fully freed block group gets placed on the unused discard queue first. Once it's processed, it will be placed on the unusued_bgs list and then the original sequence of events will happen, just without the final whole block_group discard. The mount flags can change when processing unused_bgs, so when flipping from DISCARD to DISCARD_ASYNC, the unused_bgs must be punted to the discard_list to be trimmed. If we flip off DISCARD_ASYNC, we punt free block groups on the discard_list to the unused_bg queue which will do the final discard for us. Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Dennis Zhou <dennis@kernel.org> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2019-12-14 00:22:15 +00:00
if (btrfs_test_opt(fs_info, DISCARD_ASYNC))
btrfs_discard_queue_work(&fs_info->discard_ctl,
cache);
else
btrfs_mark_bg_unused(cache);
} else {
spin_unlock(&cache->lock);
}
btrfs: fix race between writes to swap files and scrub When we active a swap file, at btrfs_swap_activate(), we acquire the exclusive operation lock to prevent the physical location of the swap file extents to be changed by operations such as balance and device replace/resize/remove. We also call there can_nocow_extent() which, among other things, checks if the block group of a swap file extent is currently RO, and if it is we can not use the extent, since a write into it would result in COWing the extent. However we have no protection against a scrub operation running after we activate the swap file, which can result in the swap file extents to be COWed while the scrub is running and operating on the respective block group, because scrub turns a block group into RO before it processes it and then back again to RW mode after processing it. That means an attempt to write into a swap file extent while scrub is processing the respective block group, will result in COWing the extent, changing its physical location on disk. Fix this by making sure that block groups that have extents that are used by active swap files can not be turned into RO mode, therefore making it not possible for a scrub to turn them into RO mode. When a scrub finds a block group that can not be turned to RO due to the existence of extents used by swap files, it proceeds to the next block group and logs a warning message that mentions the block group was skipped due to active swap files - this is the same approach we currently use for balance. Fixes: ed46ff3d42378 ("Btrfs: support swap files") CC: stable@vger.kernel.org # 5.4+ Reviewed-by: Anand Jain <anand.jain@oracle.com> Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2021-02-05 12:55:37 +00:00
skip_unfreeze:
btrfs_unfreeze_block_group(cache);
btrfs_put_block_group(cache);
if (ret)
break;
if (sctx->is_dev_replace &&
atomic64_read(&dev_replace->num_write_errors) > 0) {
ret = -EIO;
break;
}
if (sctx->stat.malloc_errors > 0) {
ret = -ENOMEM;
break;
}
skip:
key.offset = found_key.offset + dev_extent_len;
btrfs_release_path(path);
}
btrfs_free_path(path);
return ret;
}
static int scrub_one_super(struct scrub_ctx *sctx, struct btrfs_device *dev,
struct page *page, u64 physical, u64 generation)
{
struct btrfs_fs_info *fs_info = sctx->fs_info;
struct bio_vec bvec;
struct bio bio;
struct btrfs_super_block *sb = page_address(page);
int ret;
bio_init(&bio, dev->bdev, &bvec, 1, REQ_OP_READ);
bio.bi_iter.bi_sector = physical >> SECTOR_SHIFT;
__bio_add_page(&bio, page, BTRFS_SUPER_INFO_SIZE, 0);
ret = submit_bio_wait(&bio);
bio_uninit(&bio);
if (ret < 0)
return ret;
ret = btrfs_check_super_csum(fs_info, sb);
if (ret != 0) {
btrfs_err_rl(fs_info,
"super block at physical %llu devid %llu has bad csum",
physical, dev->devid);
return -EIO;
}
if (btrfs_super_generation(sb) != generation) {
btrfs_err_rl(fs_info,
"super block at physical %llu devid %llu has bad generation %llu expect %llu",
physical, dev->devid,
btrfs_super_generation(sb), generation);
return -EUCLEAN;
}
return btrfs_validate_super(fs_info, sb, -1);
}
static noinline_for_stack int scrub_supers(struct scrub_ctx *sctx,
struct btrfs_device *scrub_dev)
{
int i;
u64 bytenr;
u64 gen;
int ret = 0;
struct page *page;
struct btrfs_fs_info *fs_info = sctx->fs_info;
if (BTRFS_FS_ERROR(fs_info))
btrfs: return EROFS for BTRFS_FS_STATE_ERROR cases Eric reported seeing this message while running generic/475 BTRFS: error (device dm-3) in btrfs_sync_log:3084: errno=-117 Filesystem corrupted Full stack trace: BTRFS: error (device dm-0) in btrfs_commit_transaction:2323: errno=-5 IO failure (Error while writing out transaction) BTRFS info (device dm-0): forced readonly BTRFS warning (device dm-0): Skipping commit of aborted transaction. ------------[ cut here ]------------ BTRFS: error (device dm-0) in cleanup_transaction:1894: errno=-5 IO failure BTRFS: Transaction aborted (error -117) BTRFS warning (device dm-0): direct IO failed ino 3555 rw 0,0 sector 0x1c6480 len 4096 err no 10 BTRFS warning (device dm-0): direct IO failed ino 3555 rw 0,0 sector 0x1c6488 len 4096 err no 10 BTRFS warning (device dm-0): direct IO failed ino 3555 rw 0,0 sector 0x1c6490 len 4096 err no 10 BTRFS warning (device dm-0): direct IO failed ino 3555 rw 0,0 sector 0x1c6498 len 4096 err no 10 BTRFS warning (device dm-0): direct IO failed ino 3555 rw 0,0 sector 0x1c64a0 len 4096 err no 10 BTRFS warning (device dm-0): direct IO failed ino 3555 rw 0,0 sector 0x1c64a8 len 4096 err no 10 BTRFS warning (device dm-0): direct IO failed ino 3555 rw 0,0 sector 0x1c64b0 len 4096 err no 10 BTRFS warning (device dm-0): direct IO failed ino 3555 rw 0,0 sector 0x1c64b8 len 4096 err no 10 BTRFS warning (device dm-0): direct IO failed ino 3555 rw 0,0 sector 0x1c64c0 len 4096 err no 10 BTRFS warning (device dm-0): direct IO failed ino 3572 rw 0,0 sector 0x1b85e8 len 4096 err no 10 BTRFS warning (device dm-0): direct IO failed ino 3572 rw 0,0 sector 0x1b85f0 len 4096 err no 10 WARNING: CPU: 3 PID: 23985 at fs/btrfs/tree-log.c:3084 btrfs_sync_log+0xbc8/0xd60 [btrfs] BTRFS warning (device dm-0): direct IO failed ino 3548 rw 0,0 sector 0x1d4288 len 4096 err no 10 BTRFS warning (device dm-0): direct IO failed ino 3548 rw 0,0 sector 0x1d4290 len 4096 err no 10 BTRFS warning (device dm-0): direct IO failed ino 3548 rw 0,0 sector 0x1d4298 len 4096 err no 10 BTRFS warning (device dm-0): direct IO failed ino 3548 rw 0,0 sector 0x1d42a0 len 4096 err no 10 BTRFS warning (device dm-0): direct IO failed ino 3548 rw 0,0 sector 0x1d42a8 len 4096 err no 10 BTRFS warning (device dm-0): direct IO failed ino 3548 rw 0,0 sector 0x1d42b0 len 4096 err no 10 BTRFS warning (device dm-0): direct IO failed ino 3548 rw 0,0 sector 0x1d42b8 len 4096 err no 10 BTRFS warning (device dm-0): direct IO failed ino 3548 rw 0,0 sector 0x1d42c0 len 4096 err no 10 BTRFS warning (device dm-0): direct IO failed ino 3548 rw 0,0 sector 0x1d42c8 len 4096 err no 10 BTRFS warning (device dm-0): direct IO failed ino 3548 rw 0,0 sector 0x1d42d0 len 4096 err no 10 CPU: 3 PID: 23985 Comm: fsstress Tainted: G W L 5.8.0-rc4-default+ #1181 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-59-gc9ba527-rebuilt.opensuse.org 04/01/2014 RIP: 0010:btrfs_sync_log+0xbc8/0xd60 [btrfs] RSP: 0018:ffff909a44d17bd0 EFLAGS: 00010286 RAX: 0000000000000000 RBX: 0000000000000001 RCX: 0000000000000001 RDX: ffff8f3be41cb940 RSI: ffffffffb0108d2b RDI: ffffffffb0108ff7 RBP: ffff909a44d17e70 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000037988 R12: ffff8f3bd20e4000 R13: ffff8f3bd20e4428 R14: 00000000ffffff8b R15: ffff909a44d17c70 FS: 00007f6a6ed3fb80(0000) GS:ffff8f3c3dc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f6a6ed3e000 CR3: 00000000525c0003 CR4: 0000000000160ee0 Call Trace: ? finish_wait+0x90/0x90 ? __mutex_unlock_slowpath+0x45/0x2a0 ? lock_acquire+0xa3/0x440 ? lockref_put_or_lock+0x9/0x30 ? dput+0x20/0x4a0 ? dput+0x20/0x4a0 ? do_raw_spin_unlock+0x4b/0xc0 ? _raw_spin_unlock+0x1f/0x30 btrfs_sync_file+0x335/0x490 [btrfs] do_fsync+0x38/0x70 __x64_sys_fsync+0x10/0x20 do_syscall_64+0x50/0xe0 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x7f6a6ef1b6e3 Code: Bad RIP value. RSP: 002b:00007ffd01e20038 EFLAGS: 00000246 ORIG_RAX: 000000000000004a RAX: ffffffffffffffda RBX: 000000000007a120 RCX: 00007f6a6ef1b6e3 RDX: 00007ffd01e1ffa0 RSI: 00007ffd01e1ffa0 RDI: 0000000000000003 RBP: 0000000000000003 R08: 0000000000000001 R09: 00007ffd01e2004c R10: 0000000000000000 R11: 0000000000000246 R12: 000000000000009f R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 irq event stamp: 0 hardirqs last enabled at (0): [<0000000000000000>] 0x0 hardirqs last disabled at (0): [<ffffffffb007fe0b>] copy_process+0x67b/0x1b00 softirqs last enabled at (0): [<ffffffffb007fe0b>] copy_process+0x67b/0x1b00 softirqs last disabled at (0): [<0000000000000000>] 0x0 ---[ end trace af146e0e38433456 ]--- BTRFS: error (device dm-0) in btrfs_sync_log:3084: errno=-117 Filesystem corrupted This ret came from btrfs_write_marked_extents(). If we get an aborted transaction via EIO before, we'll see it in btree_write_cache_pages() and return EUCLEAN, which gets printed as "Filesystem corrupted". Except we shouldn't be returning EUCLEAN here, we need to be returning EROFS because EUCLEAN is reserved for actual corruption, not IO errors. We are inconsistent about our handling of BTRFS_FS_STATE_ERROR elsewhere, but we want to use EROFS for this particular case. The original transaction abort has the real error code for why we ended up with an aborted transaction, all subsequent actions just need to return EROFS because they may not have a trans handle and have no idea about the original cause of the abort. After patch "btrfs: don't WARN if we abort a transaction with EROFS" the stacktrace will not be dumped either. Reported-by: Eric Sandeen <esandeen@redhat.com> CC: stable@vger.kernel.org # 5.4+ Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> [ add full test stacktrace ] Signed-off-by: David Sterba <dsterba@suse.com>
2020-07-21 14:38:37 +00:00
return -EROFS;
page = alloc_page(GFP_KERNEL);
if (!page) {
spin_lock(&sctx->stat_lock);
sctx->stat.malloc_errors++;
spin_unlock(&sctx->stat_lock);
return -ENOMEM;
}
/* Seed devices of a new filesystem has their own generation. */
if (scrub_dev->fs_devices != fs_info->fs_devices)
gen = scrub_dev->generation;
else
gen = btrfs_get_last_trans_committed(fs_info);
for (i = 0; i < BTRFS_SUPER_MIRROR_MAX; i++) {
bytenr = btrfs_sb_offset(i);
if (bytenr + BTRFS_SUPER_INFO_SIZE >
scrub_dev->commit_total_bytes)
break;
btrfs: implement log-structured superblock for ZONED mode Superblock (and its copies) is the only data structure in btrfs which has a fixed location on a device. Since we cannot overwrite in a sequential write required zone, we cannot place superblock in the zone. One easy solution is limiting superblock and copies to be placed only in conventional zones. However, this method has two downsides: one is reduced number of superblock copies. The location of the second copy of superblock is 256GB, which is in a sequential write required zone on typical devices in the market today. So, the number of superblock and copies is limited to be two. Second downside is that we cannot support devices which have no conventional zones at all. To solve these two problems, we employ superblock log writing. It uses two adjacent zones as a circular buffer to write updated superblocks. Once the first zone is filled up, start writing into the second one. Then, when both zones are filled up and before starting to write to the first zone again, it reset the first zone. We can determine the position of the latest superblock by reading write pointer information from a device. One corner case is when both zones are full. For this situation, we read out the last superblock of each zone, and compare them to determine which zone is older. The following zones are reserved as the circular buffer on ZONED btrfs. - The primary superblock: zones 0 and 1 - The first copy: zones 16 and 17 - The second copy: zones 1024 or zone at 256GB which is minimum, and next to it If these reserved zones are conventional, superblock is written fixed at the start of the zone without logging. Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2020-11-10 11:26:14 +00:00
if (!btrfs_check_super_location(scrub_dev, bytenr))
continue;
ret = scrub_one_super(sctx, scrub_dev, page, bytenr, gen);
if (ret) {
spin_lock(&sctx->stat_lock);
sctx->stat.super_errors++;
spin_unlock(&sctx->stat_lock);
}
}
__free_page(page);
return 0;
}
btrfs: allocate scrub workqueues outside of locks I got the following lockdep splat while testing: ====================================================== WARNING: possible circular locking dependency detected 5.8.0-rc7-00172-g021118712e59 #932 Not tainted ------------------------------------------------------ btrfs/229626 is trying to acquire lock: ffffffff828513f0 (cpu_hotplug_lock){++++}-{0:0}, at: alloc_workqueue+0x378/0x450 but task is already holding lock: ffff889dd3889518 (&fs_info->scrub_lock){+.+.}-{3:3}, at: btrfs_scrub_dev+0x11c/0x630 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #7 (&fs_info->scrub_lock){+.+.}-{3:3}: __mutex_lock+0x9f/0x930 btrfs_scrub_dev+0x11c/0x630 btrfs_dev_replace_by_ioctl.cold.21+0x10a/0x1d4 btrfs_ioctl+0x2799/0x30a0 ksys_ioctl+0x83/0xc0 __x64_sys_ioctl+0x16/0x20 do_syscall_64+0x50/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xa9 -> #6 (&fs_devs->device_list_mutex){+.+.}-{3:3}: __mutex_lock+0x9f/0x930 btrfs_run_dev_stats+0x49/0x480 commit_cowonly_roots+0xb5/0x2a0 btrfs_commit_transaction+0x516/0xa60 sync_filesystem+0x6b/0x90 generic_shutdown_super+0x22/0x100 kill_anon_super+0xe/0x30 btrfs_kill_super+0x12/0x20 deactivate_locked_super+0x29/0x60 cleanup_mnt+0xb8/0x140 task_work_run+0x6d/0xb0 __prepare_exit_to_usermode+0x1cc/0x1e0 do_syscall_64+0x5c/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xa9 -> #5 (&fs_info->tree_log_mutex){+.+.}-{3:3}: __mutex_lock+0x9f/0x930 btrfs_commit_transaction+0x4bb/0xa60 sync_filesystem+0x6b/0x90 generic_shutdown_super+0x22/0x100 kill_anon_super+0xe/0x30 btrfs_kill_super+0x12/0x20 deactivate_locked_super+0x29/0x60 cleanup_mnt+0xb8/0x140 task_work_run+0x6d/0xb0 __prepare_exit_to_usermode+0x1cc/0x1e0 do_syscall_64+0x5c/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xa9 -> #4 (&fs_info->reloc_mutex){+.+.}-{3:3}: __mutex_lock+0x9f/0x930 btrfs_record_root_in_trans+0x43/0x70 start_transaction+0xd1/0x5d0 btrfs_dirty_inode+0x42/0xd0 touch_atime+0xa1/0xd0 btrfs_file_mmap+0x3f/0x60 mmap_region+0x3a4/0x640 do_mmap+0x376/0x580 vm_mmap_pgoff+0xd5/0x120 ksys_mmap_pgoff+0x193/0x230 do_syscall_64+0x50/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xa9 -> #3 (&mm->mmap_lock#2){++++}-{3:3}: __might_fault+0x68/0x90 _copy_to_user+0x1e/0x80 perf_read+0x141/0x2c0 vfs_read+0xad/0x1b0 ksys_read+0x5f/0xe0 do_syscall_64+0x50/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xa9 -> #2 (&cpuctx_mutex){+.+.}-{3:3}: __mutex_lock+0x9f/0x930 perf_event_init_cpu+0x88/0x150 perf_event_init+0x1db/0x20b start_kernel+0x3ae/0x53c secondary_startup_64+0xa4/0xb0 -> #1 (pmus_lock){+.+.}-{3:3}: __mutex_lock+0x9f/0x930 perf_event_init_cpu+0x4f/0x150 cpuhp_invoke_callback+0xb1/0x900 _cpu_up.constprop.26+0x9f/0x130 cpu_up+0x7b/0xc0 bringup_nonboot_cpus+0x4f/0x60 smp_init+0x26/0x71 kernel_init_freeable+0x110/0x258 kernel_init+0xa/0x103 ret_from_fork+0x1f/0x30 -> #0 (cpu_hotplug_lock){++++}-{0:0}: __lock_acquire+0x1272/0x2310 lock_acquire+0x9e/0x360 cpus_read_lock+0x39/0xb0 alloc_workqueue+0x378/0x450 __btrfs_alloc_workqueue+0x15d/0x200 btrfs_alloc_workqueue+0x51/0x160 scrub_workers_get+0x5a/0x170 btrfs_scrub_dev+0x18c/0x630 btrfs_dev_replace_by_ioctl.cold.21+0x10a/0x1d4 btrfs_ioctl+0x2799/0x30a0 ksys_ioctl+0x83/0xc0 __x64_sys_ioctl+0x16/0x20 do_syscall_64+0x50/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xa9 other info that might help us debug this: Chain exists of: cpu_hotplug_lock --> &fs_devs->device_list_mutex --> &fs_info->scrub_lock Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&fs_info->scrub_lock); lock(&fs_devs->device_list_mutex); lock(&fs_info->scrub_lock); lock(cpu_hotplug_lock); *** DEADLOCK *** 2 locks held by btrfs/229626: #0: ffff88bfe8bb86e0 (&fs_devs->device_list_mutex){+.+.}-{3:3}, at: btrfs_scrub_dev+0xbd/0x630 #1: ffff889dd3889518 (&fs_info->scrub_lock){+.+.}-{3:3}, at: btrfs_scrub_dev+0x11c/0x630 stack backtrace: CPU: 15 PID: 229626 Comm: btrfs Kdump: loaded Not tainted 5.8.0-rc7-00172-g021118712e59 #932 Hardware name: Quanta Tioga Pass Single Side 01-0030993006/Tioga Pass Single Side, BIOS F08_3A18 12/20/2018 Call Trace: dump_stack+0x78/0xa0 check_noncircular+0x165/0x180 __lock_acquire+0x1272/0x2310 lock_acquire+0x9e/0x360 ? alloc_workqueue+0x378/0x450 cpus_read_lock+0x39/0xb0 ? alloc_workqueue+0x378/0x450 alloc_workqueue+0x378/0x450 ? rcu_read_lock_sched_held+0x52/0x80 __btrfs_alloc_workqueue+0x15d/0x200 btrfs_alloc_workqueue+0x51/0x160 scrub_workers_get+0x5a/0x170 btrfs_scrub_dev+0x18c/0x630 ? start_transaction+0xd1/0x5d0 btrfs_dev_replace_by_ioctl.cold.21+0x10a/0x1d4 btrfs_ioctl+0x2799/0x30a0 ? do_sigaction+0x102/0x250 ? lockdep_hardirqs_on_prepare+0xca/0x160 ? _raw_spin_unlock_irq+0x24/0x30 ? trace_hardirqs_on+0x1c/0xe0 ? _raw_spin_unlock_irq+0x24/0x30 ? do_sigaction+0x102/0x250 ? ksys_ioctl+0x83/0xc0 ksys_ioctl+0x83/0xc0 __x64_sys_ioctl+0x16/0x20 do_syscall_64+0x50/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xa9 This happens because we're allocating the scrub workqueues under the scrub and device list mutex, which brings in a whole host of other dependencies. Because the work queue allocation is done with GFP_KERNEL, it can trigger reclaim, which can lead to a transaction commit, which in turns needs the device_list_mutex, it can lead to a deadlock. A different problem for which this fix is a solution. Fix this by moving the actual allocation outside of the scrub lock, and then only take the lock once we're ready to actually assign them to the fs_info. We'll now have to cleanup the workqueues in a few more places, so I've added a helper to do the refcount dance to safely free the workqueues. CC: stable@vger.kernel.org # 5.4+ Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2020-08-10 15:42:29 +00:00
static void scrub_workers_put(struct btrfs_fs_info *fs_info)
{
if (refcount_dec_and_mutex_lock(&fs_info->scrub_workers_refcnt,
&fs_info->scrub_lock)) {
struct workqueue_struct *scrub_workers = fs_info->scrub_workers;
btrfs: allocate scrub workqueues outside of locks I got the following lockdep splat while testing: ====================================================== WARNING: possible circular locking dependency detected 5.8.0-rc7-00172-g021118712e59 #932 Not tainted ------------------------------------------------------ btrfs/229626 is trying to acquire lock: ffffffff828513f0 (cpu_hotplug_lock){++++}-{0:0}, at: alloc_workqueue+0x378/0x450 but task is already holding lock: ffff889dd3889518 (&fs_info->scrub_lock){+.+.}-{3:3}, at: btrfs_scrub_dev+0x11c/0x630 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #7 (&fs_info->scrub_lock){+.+.}-{3:3}: __mutex_lock+0x9f/0x930 btrfs_scrub_dev+0x11c/0x630 btrfs_dev_replace_by_ioctl.cold.21+0x10a/0x1d4 btrfs_ioctl+0x2799/0x30a0 ksys_ioctl+0x83/0xc0 __x64_sys_ioctl+0x16/0x20 do_syscall_64+0x50/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xa9 -> #6 (&fs_devs->device_list_mutex){+.+.}-{3:3}: __mutex_lock+0x9f/0x930 btrfs_run_dev_stats+0x49/0x480 commit_cowonly_roots+0xb5/0x2a0 btrfs_commit_transaction+0x516/0xa60 sync_filesystem+0x6b/0x90 generic_shutdown_super+0x22/0x100 kill_anon_super+0xe/0x30 btrfs_kill_super+0x12/0x20 deactivate_locked_super+0x29/0x60 cleanup_mnt+0xb8/0x140 task_work_run+0x6d/0xb0 __prepare_exit_to_usermode+0x1cc/0x1e0 do_syscall_64+0x5c/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xa9 -> #5 (&fs_info->tree_log_mutex){+.+.}-{3:3}: __mutex_lock+0x9f/0x930 btrfs_commit_transaction+0x4bb/0xa60 sync_filesystem+0x6b/0x90 generic_shutdown_super+0x22/0x100 kill_anon_super+0xe/0x30 btrfs_kill_super+0x12/0x20 deactivate_locked_super+0x29/0x60 cleanup_mnt+0xb8/0x140 task_work_run+0x6d/0xb0 __prepare_exit_to_usermode+0x1cc/0x1e0 do_syscall_64+0x5c/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xa9 -> #4 (&fs_info->reloc_mutex){+.+.}-{3:3}: __mutex_lock+0x9f/0x930 btrfs_record_root_in_trans+0x43/0x70 start_transaction+0xd1/0x5d0 btrfs_dirty_inode+0x42/0xd0 touch_atime+0xa1/0xd0 btrfs_file_mmap+0x3f/0x60 mmap_region+0x3a4/0x640 do_mmap+0x376/0x580 vm_mmap_pgoff+0xd5/0x120 ksys_mmap_pgoff+0x193/0x230 do_syscall_64+0x50/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xa9 -> #3 (&mm->mmap_lock#2){++++}-{3:3}: __might_fault+0x68/0x90 _copy_to_user+0x1e/0x80 perf_read+0x141/0x2c0 vfs_read+0xad/0x1b0 ksys_read+0x5f/0xe0 do_syscall_64+0x50/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xa9 -> #2 (&cpuctx_mutex){+.+.}-{3:3}: __mutex_lock+0x9f/0x930 perf_event_init_cpu+0x88/0x150 perf_event_init+0x1db/0x20b start_kernel+0x3ae/0x53c secondary_startup_64+0xa4/0xb0 -> #1 (pmus_lock){+.+.}-{3:3}: __mutex_lock+0x9f/0x930 perf_event_init_cpu+0x4f/0x150 cpuhp_invoke_callback+0xb1/0x900 _cpu_up.constprop.26+0x9f/0x130 cpu_up+0x7b/0xc0 bringup_nonboot_cpus+0x4f/0x60 smp_init+0x26/0x71 kernel_init_freeable+0x110/0x258 kernel_init+0xa/0x103 ret_from_fork+0x1f/0x30 -> #0 (cpu_hotplug_lock){++++}-{0:0}: __lock_acquire+0x1272/0x2310 lock_acquire+0x9e/0x360 cpus_read_lock+0x39/0xb0 alloc_workqueue+0x378/0x450 __btrfs_alloc_workqueue+0x15d/0x200 btrfs_alloc_workqueue+0x51/0x160 scrub_workers_get+0x5a/0x170 btrfs_scrub_dev+0x18c/0x630 btrfs_dev_replace_by_ioctl.cold.21+0x10a/0x1d4 btrfs_ioctl+0x2799/0x30a0 ksys_ioctl+0x83/0xc0 __x64_sys_ioctl+0x16/0x20 do_syscall_64+0x50/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xa9 other info that might help us debug this: Chain exists of: cpu_hotplug_lock --> &fs_devs->device_list_mutex --> &fs_info->scrub_lock Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&fs_info->scrub_lock); lock(&fs_devs->device_list_mutex); lock(&fs_info->scrub_lock); lock(cpu_hotplug_lock); *** DEADLOCK *** 2 locks held by btrfs/229626: #0: ffff88bfe8bb86e0 (&fs_devs->device_list_mutex){+.+.}-{3:3}, at: btrfs_scrub_dev+0xbd/0x630 #1: ffff889dd3889518 (&fs_info->scrub_lock){+.+.}-{3:3}, at: btrfs_scrub_dev+0x11c/0x630 stack backtrace: CPU: 15 PID: 229626 Comm: btrfs Kdump: loaded Not tainted 5.8.0-rc7-00172-g021118712e59 #932 Hardware name: Quanta Tioga Pass Single Side 01-0030993006/Tioga Pass Single Side, BIOS F08_3A18 12/20/2018 Call Trace: dump_stack+0x78/0xa0 check_noncircular+0x165/0x180 __lock_acquire+0x1272/0x2310 lock_acquire+0x9e/0x360 ? alloc_workqueue+0x378/0x450 cpus_read_lock+0x39/0xb0 ? alloc_workqueue+0x378/0x450 alloc_workqueue+0x378/0x450 ? rcu_read_lock_sched_held+0x52/0x80 __btrfs_alloc_workqueue+0x15d/0x200 btrfs_alloc_workqueue+0x51/0x160 scrub_workers_get+0x5a/0x170 btrfs_scrub_dev+0x18c/0x630 ? start_transaction+0xd1/0x5d0 btrfs_dev_replace_by_ioctl.cold.21+0x10a/0x1d4 btrfs_ioctl+0x2799/0x30a0 ? do_sigaction+0x102/0x250 ? lockdep_hardirqs_on_prepare+0xca/0x160 ? _raw_spin_unlock_irq+0x24/0x30 ? trace_hardirqs_on+0x1c/0xe0 ? _raw_spin_unlock_irq+0x24/0x30 ? do_sigaction+0x102/0x250 ? ksys_ioctl+0x83/0xc0 ksys_ioctl+0x83/0xc0 __x64_sys_ioctl+0x16/0x20 do_syscall_64+0x50/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xa9 This happens because we're allocating the scrub workqueues under the scrub and device list mutex, which brings in a whole host of other dependencies. Because the work queue allocation is done with GFP_KERNEL, it can trigger reclaim, which can lead to a transaction commit, which in turns needs the device_list_mutex, it can lead to a deadlock. A different problem for which this fix is a solution. Fix this by moving the actual allocation outside of the scrub lock, and then only take the lock once we're ready to actually assign them to the fs_info. We'll now have to cleanup the workqueues in a few more places, so I've added a helper to do the refcount dance to safely free the workqueues. CC: stable@vger.kernel.org # 5.4+ Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2020-08-10 15:42:29 +00:00
fs_info->scrub_workers = NULL;
mutex_unlock(&fs_info->scrub_lock);
if (scrub_workers)
destroy_workqueue(scrub_workers);
btrfs: allocate scrub workqueues outside of locks I got the following lockdep splat while testing: ====================================================== WARNING: possible circular locking dependency detected 5.8.0-rc7-00172-g021118712e59 #932 Not tainted ------------------------------------------------------ btrfs/229626 is trying to acquire lock: ffffffff828513f0 (cpu_hotplug_lock){++++}-{0:0}, at: alloc_workqueue+0x378/0x450 but task is already holding lock: ffff889dd3889518 (&fs_info->scrub_lock){+.+.}-{3:3}, at: btrfs_scrub_dev+0x11c/0x630 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #7 (&fs_info->scrub_lock){+.+.}-{3:3}: __mutex_lock+0x9f/0x930 btrfs_scrub_dev+0x11c/0x630 btrfs_dev_replace_by_ioctl.cold.21+0x10a/0x1d4 btrfs_ioctl+0x2799/0x30a0 ksys_ioctl+0x83/0xc0 __x64_sys_ioctl+0x16/0x20 do_syscall_64+0x50/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xa9 -> #6 (&fs_devs->device_list_mutex){+.+.}-{3:3}: __mutex_lock+0x9f/0x930 btrfs_run_dev_stats+0x49/0x480 commit_cowonly_roots+0xb5/0x2a0 btrfs_commit_transaction+0x516/0xa60 sync_filesystem+0x6b/0x90 generic_shutdown_super+0x22/0x100 kill_anon_super+0xe/0x30 btrfs_kill_super+0x12/0x20 deactivate_locked_super+0x29/0x60 cleanup_mnt+0xb8/0x140 task_work_run+0x6d/0xb0 __prepare_exit_to_usermode+0x1cc/0x1e0 do_syscall_64+0x5c/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xa9 -> #5 (&fs_info->tree_log_mutex){+.+.}-{3:3}: __mutex_lock+0x9f/0x930 btrfs_commit_transaction+0x4bb/0xa60 sync_filesystem+0x6b/0x90 generic_shutdown_super+0x22/0x100 kill_anon_super+0xe/0x30 btrfs_kill_super+0x12/0x20 deactivate_locked_super+0x29/0x60 cleanup_mnt+0xb8/0x140 task_work_run+0x6d/0xb0 __prepare_exit_to_usermode+0x1cc/0x1e0 do_syscall_64+0x5c/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xa9 -> #4 (&fs_info->reloc_mutex){+.+.}-{3:3}: __mutex_lock+0x9f/0x930 btrfs_record_root_in_trans+0x43/0x70 start_transaction+0xd1/0x5d0 btrfs_dirty_inode+0x42/0xd0 touch_atime+0xa1/0xd0 btrfs_file_mmap+0x3f/0x60 mmap_region+0x3a4/0x640 do_mmap+0x376/0x580 vm_mmap_pgoff+0xd5/0x120 ksys_mmap_pgoff+0x193/0x230 do_syscall_64+0x50/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xa9 -> #3 (&mm->mmap_lock#2){++++}-{3:3}: __might_fault+0x68/0x90 _copy_to_user+0x1e/0x80 perf_read+0x141/0x2c0 vfs_read+0xad/0x1b0 ksys_read+0x5f/0xe0 do_syscall_64+0x50/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xa9 -> #2 (&cpuctx_mutex){+.+.}-{3:3}: __mutex_lock+0x9f/0x930 perf_event_init_cpu+0x88/0x150 perf_event_init+0x1db/0x20b start_kernel+0x3ae/0x53c secondary_startup_64+0xa4/0xb0 -> #1 (pmus_lock){+.+.}-{3:3}: __mutex_lock+0x9f/0x930 perf_event_init_cpu+0x4f/0x150 cpuhp_invoke_callback+0xb1/0x900 _cpu_up.constprop.26+0x9f/0x130 cpu_up+0x7b/0xc0 bringup_nonboot_cpus+0x4f/0x60 smp_init+0x26/0x71 kernel_init_freeable+0x110/0x258 kernel_init+0xa/0x103 ret_from_fork+0x1f/0x30 -> #0 (cpu_hotplug_lock){++++}-{0:0}: __lock_acquire+0x1272/0x2310 lock_acquire+0x9e/0x360 cpus_read_lock+0x39/0xb0 alloc_workqueue+0x378/0x450 __btrfs_alloc_workqueue+0x15d/0x200 btrfs_alloc_workqueue+0x51/0x160 scrub_workers_get+0x5a/0x170 btrfs_scrub_dev+0x18c/0x630 btrfs_dev_replace_by_ioctl.cold.21+0x10a/0x1d4 btrfs_ioctl+0x2799/0x30a0 ksys_ioctl+0x83/0xc0 __x64_sys_ioctl+0x16/0x20 do_syscall_64+0x50/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xa9 other info that might help us debug this: Chain exists of: cpu_hotplug_lock --> &fs_devs->device_list_mutex --> &fs_info->scrub_lock Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&fs_info->scrub_lock); lock(&fs_devs->device_list_mutex); lock(&fs_info->scrub_lock); lock(cpu_hotplug_lock); *** DEADLOCK *** 2 locks held by btrfs/229626: #0: ffff88bfe8bb86e0 (&fs_devs->device_list_mutex){+.+.}-{3:3}, at: btrfs_scrub_dev+0xbd/0x630 #1: ffff889dd3889518 (&fs_info->scrub_lock){+.+.}-{3:3}, at: btrfs_scrub_dev+0x11c/0x630 stack backtrace: CPU: 15 PID: 229626 Comm: btrfs Kdump: loaded Not tainted 5.8.0-rc7-00172-g021118712e59 #932 Hardware name: Quanta Tioga Pass Single Side 01-0030993006/Tioga Pass Single Side, BIOS F08_3A18 12/20/2018 Call Trace: dump_stack+0x78/0xa0 check_noncircular+0x165/0x180 __lock_acquire+0x1272/0x2310 lock_acquire+0x9e/0x360 ? alloc_workqueue+0x378/0x450 cpus_read_lock+0x39/0xb0 ? alloc_workqueue+0x378/0x450 alloc_workqueue+0x378/0x450 ? rcu_read_lock_sched_held+0x52/0x80 __btrfs_alloc_workqueue+0x15d/0x200 btrfs_alloc_workqueue+0x51/0x160 scrub_workers_get+0x5a/0x170 btrfs_scrub_dev+0x18c/0x630 ? start_transaction+0xd1/0x5d0 btrfs_dev_replace_by_ioctl.cold.21+0x10a/0x1d4 btrfs_ioctl+0x2799/0x30a0 ? do_sigaction+0x102/0x250 ? lockdep_hardirqs_on_prepare+0xca/0x160 ? _raw_spin_unlock_irq+0x24/0x30 ? trace_hardirqs_on+0x1c/0xe0 ? _raw_spin_unlock_irq+0x24/0x30 ? do_sigaction+0x102/0x250 ? ksys_ioctl+0x83/0xc0 ksys_ioctl+0x83/0xc0 __x64_sys_ioctl+0x16/0x20 do_syscall_64+0x50/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xa9 This happens because we're allocating the scrub workqueues under the scrub and device list mutex, which brings in a whole host of other dependencies. Because the work queue allocation is done with GFP_KERNEL, it can trigger reclaim, which can lead to a transaction commit, which in turns needs the device_list_mutex, it can lead to a deadlock. A different problem for which this fix is a solution. Fix this by moving the actual allocation outside of the scrub lock, and then only take the lock once we're ready to actually assign them to the fs_info. We'll now have to cleanup the workqueues in a few more places, so I've added a helper to do the refcount dance to safely free the workqueues. CC: stable@vger.kernel.org # 5.4+ Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2020-08-10 15:42:29 +00:00
}
}
/*
* get a reference count on fs_info->scrub_workers. start worker if necessary
*/
static noinline_for_stack int scrub_workers_get(struct btrfs_fs_info *fs_info)
{
struct workqueue_struct *scrub_workers = NULL;
unsigned int flags = WQ_FREEZABLE | WQ_UNBOUND;
int max_active = fs_info->thread_pool_size;
btrfs: allocate scrub workqueues outside of locks I got the following lockdep splat while testing: ====================================================== WARNING: possible circular locking dependency detected 5.8.0-rc7-00172-g021118712e59 #932 Not tainted ------------------------------------------------------ btrfs/229626 is trying to acquire lock: ffffffff828513f0 (cpu_hotplug_lock){++++}-{0:0}, at: alloc_workqueue+0x378/0x450 but task is already holding lock: ffff889dd3889518 (&fs_info->scrub_lock){+.+.}-{3:3}, at: btrfs_scrub_dev+0x11c/0x630 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #7 (&fs_info->scrub_lock){+.+.}-{3:3}: __mutex_lock+0x9f/0x930 btrfs_scrub_dev+0x11c/0x630 btrfs_dev_replace_by_ioctl.cold.21+0x10a/0x1d4 btrfs_ioctl+0x2799/0x30a0 ksys_ioctl+0x83/0xc0 __x64_sys_ioctl+0x16/0x20 do_syscall_64+0x50/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xa9 -> #6 (&fs_devs->device_list_mutex){+.+.}-{3:3}: __mutex_lock+0x9f/0x930 btrfs_run_dev_stats+0x49/0x480 commit_cowonly_roots+0xb5/0x2a0 btrfs_commit_transaction+0x516/0xa60 sync_filesystem+0x6b/0x90 generic_shutdown_super+0x22/0x100 kill_anon_super+0xe/0x30 btrfs_kill_super+0x12/0x20 deactivate_locked_super+0x29/0x60 cleanup_mnt+0xb8/0x140 task_work_run+0x6d/0xb0 __prepare_exit_to_usermode+0x1cc/0x1e0 do_syscall_64+0x5c/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xa9 -> #5 (&fs_info->tree_log_mutex){+.+.}-{3:3}: __mutex_lock+0x9f/0x930 btrfs_commit_transaction+0x4bb/0xa60 sync_filesystem+0x6b/0x90 generic_shutdown_super+0x22/0x100 kill_anon_super+0xe/0x30 btrfs_kill_super+0x12/0x20 deactivate_locked_super+0x29/0x60 cleanup_mnt+0xb8/0x140 task_work_run+0x6d/0xb0 __prepare_exit_to_usermode+0x1cc/0x1e0 do_syscall_64+0x5c/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xa9 -> #4 (&fs_info->reloc_mutex){+.+.}-{3:3}: __mutex_lock+0x9f/0x930 btrfs_record_root_in_trans+0x43/0x70 start_transaction+0xd1/0x5d0 btrfs_dirty_inode+0x42/0xd0 touch_atime+0xa1/0xd0 btrfs_file_mmap+0x3f/0x60 mmap_region+0x3a4/0x640 do_mmap+0x376/0x580 vm_mmap_pgoff+0xd5/0x120 ksys_mmap_pgoff+0x193/0x230 do_syscall_64+0x50/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xa9 -> #3 (&mm->mmap_lock#2){++++}-{3:3}: __might_fault+0x68/0x90 _copy_to_user+0x1e/0x80 perf_read+0x141/0x2c0 vfs_read+0xad/0x1b0 ksys_read+0x5f/0xe0 do_syscall_64+0x50/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xa9 -> #2 (&cpuctx_mutex){+.+.}-{3:3}: __mutex_lock+0x9f/0x930 perf_event_init_cpu+0x88/0x150 perf_event_init+0x1db/0x20b start_kernel+0x3ae/0x53c secondary_startup_64+0xa4/0xb0 -> #1 (pmus_lock){+.+.}-{3:3}: __mutex_lock+0x9f/0x930 perf_event_init_cpu+0x4f/0x150 cpuhp_invoke_callback+0xb1/0x900 _cpu_up.constprop.26+0x9f/0x130 cpu_up+0x7b/0xc0 bringup_nonboot_cpus+0x4f/0x60 smp_init+0x26/0x71 kernel_init_freeable+0x110/0x258 kernel_init+0xa/0x103 ret_from_fork+0x1f/0x30 -> #0 (cpu_hotplug_lock){++++}-{0:0}: __lock_acquire+0x1272/0x2310 lock_acquire+0x9e/0x360 cpus_read_lock+0x39/0xb0 alloc_workqueue+0x378/0x450 __btrfs_alloc_workqueue+0x15d/0x200 btrfs_alloc_workqueue+0x51/0x160 scrub_workers_get+0x5a/0x170 btrfs_scrub_dev+0x18c/0x630 btrfs_dev_replace_by_ioctl.cold.21+0x10a/0x1d4 btrfs_ioctl+0x2799/0x30a0 ksys_ioctl+0x83/0xc0 __x64_sys_ioctl+0x16/0x20 do_syscall_64+0x50/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xa9 other info that might help us debug this: Chain exists of: cpu_hotplug_lock --> &fs_devs->device_list_mutex --> &fs_info->scrub_lock Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&fs_info->scrub_lock); lock(&fs_devs->device_list_mutex); lock(&fs_info->scrub_lock); lock(cpu_hotplug_lock); *** DEADLOCK *** 2 locks held by btrfs/229626: #0: ffff88bfe8bb86e0 (&fs_devs->device_list_mutex){+.+.}-{3:3}, at: btrfs_scrub_dev+0xbd/0x630 #1: ffff889dd3889518 (&fs_info->scrub_lock){+.+.}-{3:3}, at: btrfs_scrub_dev+0x11c/0x630 stack backtrace: CPU: 15 PID: 229626 Comm: btrfs Kdump: loaded Not tainted 5.8.0-rc7-00172-g021118712e59 #932 Hardware name: Quanta Tioga Pass Single Side 01-0030993006/Tioga Pass Single Side, BIOS F08_3A18 12/20/2018 Call Trace: dump_stack+0x78/0xa0 check_noncircular+0x165/0x180 __lock_acquire+0x1272/0x2310 lock_acquire+0x9e/0x360 ? alloc_workqueue+0x378/0x450 cpus_read_lock+0x39/0xb0 ? alloc_workqueue+0x378/0x450 alloc_workqueue+0x378/0x450 ? rcu_read_lock_sched_held+0x52/0x80 __btrfs_alloc_workqueue+0x15d/0x200 btrfs_alloc_workqueue+0x51/0x160 scrub_workers_get+0x5a/0x170 btrfs_scrub_dev+0x18c/0x630 ? start_transaction+0xd1/0x5d0 btrfs_dev_replace_by_ioctl.cold.21+0x10a/0x1d4 btrfs_ioctl+0x2799/0x30a0 ? do_sigaction+0x102/0x250 ? lockdep_hardirqs_on_prepare+0xca/0x160 ? _raw_spin_unlock_irq+0x24/0x30 ? trace_hardirqs_on+0x1c/0xe0 ? _raw_spin_unlock_irq+0x24/0x30 ? do_sigaction+0x102/0x250 ? ksys_ioctl+0x83/0xc0 ksys_ioctl+0x83/0xc0 __x64_sys_ioctl+0x16/0x20 do_syscall_64+0x50/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xa9 This happens because we're allocating the scrub workqueues under the scrub and device list mutex, which brings in a whole host of other dependencies. Because the work queue allocation is done with GFP_KERNEL, it can trigger reclaim, which can lead to a transaction commit, which in turns needs the device_list_mutex, it can lead to a deadlock. A different problem for which this fix is a solution. Fix this by moving the actual allocation outside of the scrub lock, and then only take the lock once we're ready to actually assign them to the fs_info. We'll now have to cleanup the workqueues in a few more places, so I've added a helper to do the refcount dance to safely free the workqueues. CC: stable@vger.kernel.org # 5.4+ Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2020-08-10 15:42:29 +00:00
int ret = -ENOMEM;
btrfs: allocate scrub workqueues outside of locks I got the following lockdep splat while testing: ====================================================== WARNING: possible circular locking dependency detected 5.8.0-rc7-00172-g021118712e59 #932 Not tainted ------------------------------------------------------ btrfs/229626 is trying to acquire lock: ffffffff828513f0 (cpu_hotplug_lock){++++}-{0:0}, at: alloc_workqueue+0x378/0x450 but task is already holding lock: ffff889dd3889518 (&fs_info->scrub_lock){+.+.}-{3:3}, at: btrfs_scrub_dev+0x11c/0x630 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #7 (&fs_info->scrub_lock){+.+.}-{3:3}: __mutex_lock+0x9f/0x930 btrfs_scrub_dev+0x11c/0x630 btrfs_dev_replace_by_ioctl.cold.21+0x10a/0x1d4 btrfs_ioctl+0x2799/0x30a0 ksys_ioctl+0x83/0xc0 __x64_sys_ioctl+0x16/0x20 do_syscall_64+0x50/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xa9 -> #6 (&fs_devs->device_list_mutex){+.+.}-{3:3}: __mutex_lock+0x9f/0x930 btrfs_run_dev_stats+0x49/0x480 commit_cowonly_roots+0xb5/0x2a0 btrfs_commit_transaction+0x516/0xa60 sync_filesystem+0x6b/0x90 generic_shutdown_super+0x22/0x100 kill_anon_super+0xe/0x30 btrfs_kill_super+0x12/0x20 deactivate_locked_super+0x29/0x60 cleanup_mnt+0xb8/0x140 task_work_run+0x6d/0xb0 __prepare_exit_to_usermode+0x1cc/0x1e0 do_syscall_64+0x5c/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xa9 -> #5 (&fs_info->tree_log_mutex){+.+.}-{3:3}: __mutex_lock+0x9f/0x930 btrfs_commit_transaction+0x4bb/0xa60 sync_filesystem+0x6b/0x90 generic_shutdown_super+0x22/0x100 kill_anon_super+0xe/0x30 btrfs_kill_super+0x12/0x20 deactivate_locked_super+0x29/0x60 cleanup_mnt+0xb8/0x140 task_work_run+0x6d/0xb0 __prepare_exit_to_usermode+0x1cc/0x1e0 do_syscall_64+0x5c/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xa9 -> #4 (&fs_info->reloc_mutex){+.+.}-{3:3}: __mutex_lock+0x9f/0x930 btrfs_record_root_in_trans+0x43/0x70 start_transaction+0xd1/0x5d0 btrfs_dirty_inode+0x42/0xd0 touch_atime+0xa1/0xd0 btrfs_file_mmap+0x3f/0x60 mmap_region+0x3a4/0x640 do_mmap+0x376/0x580 vm_mmap_pgoff+0xd5/0x120 ksys_mmap_pgoff+0x193/0x230 do_syscall_64+0x50/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xa9 -> #3 (&mm->mmap_lock#2){++++}-{3:3}: __might_fault+0x68/0x90 _copy_to_user+0x1e/0x80 perf_read+0x141/0x2c0 vfs_read+0xad/0x1b0 ksys_read+0x5f/0xe0 do_syscall_64+0x50/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xa9 -> #2 (&cpuctx_mutex){+.+.}-{3:3}: __mutex_lock+0x9f/0x930 perf_event_init_cpu+0x88/0x150 perf_event_init+0x1db/0x20b start_kernel+0x3ae/0x53c secondary_startup_64+0xa4/0xb0 -> #1 (pmus_lock){+.+.}-{3:3}: __mutex_lock+0x9f/0x930 perf_event_init_cpu+0x4f/0x150 cpuhp_invoke_callback+0xb1/0x900 _cpu_up.constprop.26+0x9f/0x130 cpu_up+0x7b/0xc0 bringup_nonboot_cpus+0x4f/0x60 smp_init+0x26/0x71 kernel_init_freeable+0x110/0x258 kernel_init+0xa/0x103 ret_from_fork+0x1f/0x30 -> #0 (cpu_hotplug_lock){++++}-{0:0}: __lock_acquire+0x1272/0x2310 lock_acquire+0x9e/0x360 cpus_read_lock+0x39/0xb0 alloc_workqueue+0x378/0x450 __btrfs_alloc_workqueue+0x15d/0x200 btrfs_alloc_workqueue+0x51/0x160 scrub_workers_get+0x5a/0x170 btrfs_scrub_dev+0x18c/0x630 btrfs_dev_replace_by_ioctl.cold.21+0x10a/0x1d4 btrfs_ioctl+0x2799/0x30a0 ksys_ioctl+0x83/0xc0 __x64_sys_ioctl+0x16/0x20 do_syscall_64+0x50/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xa9 other info that might help us debug this: Chain exists of: cpu_hotplug_lock --> &fs_devs->device_list_mutex --> &fs_info->scrub_lock Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&fs_info->scrub_lock); lock(&fs_devs->device_list_mutex); lock(&fs_info->scrub_lock); lock(cpu_hotplug_lock); *** DEADLOCK *** 2 locks held by btrfs/229626: #0: ffff88bfe8bb86e0 (&fs_devs->device_list_mutex){+.+.}-{3:3}, at: btrfs_scrub_dev+0xbd/0x630 #1: ffff889dd3889518 (&fs_info->scrub_lock){+.+.}-{3:3}, at: btrfs_scrub_dev+0x11c/0x630 stack backtrace: CPU: 15 PID: 229626 Comm: btrfs Kdump: loaded Not tainted 5.8.0-rc7-00172-g021118712e59 #932 Hardware name: Quanta Tioga Pass Single Side 01-0030993006/Tioga Pass Single Side, BIOS F08_3A18 12/20/2018 Call Trace: dump_stack+0x78/0xa0 check_noncircular+0x165/0x180 __lock_acquire+0x1272/0x2310 lock_acquire+0x9e/0x360 ? alloc_workqueue+0x378/0x450 cpus_read_lock+0x39/0xb0 ? alloc_workqueue+0x378/0x450 alloc_workqueue+0x378/0x450 ? rcu_read_lock_sched_held+0x52/0x80 __btrfs_alloc_workqueue+0x15d/0x200 btrfs_alloc_workqueue+0x51/0x160 scrub_workers_get+0x5a/0x170 btrfs_scrub_dev+0x18c/0x630 ? start_transaction+0xd1/0x5d0 btrfs_dev_replace_by_ioctl.cold.21+0x10a/0x1d4 btrfs_ioctl+0x2799/0x30a0 ? do_sigaction+0x102/0x250 ? lockdep_hardirqs_on_prepare+0xca/0x160 ? _raw_spin_unlock_irq+0x24/0x30 ? trace_hardirqs_on+0x1c/0xe0 ? _raw_spin_unlock_irq+0x24/0x30 ? do_sigaction+0x102/0x250 ? ksys_ioctl+0x83/0xc0 ksys_ioctl+0x83/0xc0 __x64_sys_ioctl+0x16/0x20 do_syscall_64+0x50/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xa9 This happens because we're allocating the scrub workqueues under the scrub and device list mutex, which brings in a whole host of other dependencies. Because the work queue allocation is done with GFP_KERNEL, it can trigger reclaim, which can lead to a transaction commit, which in turns needs the device_list_mutex, it can lead to a deadlock. A different problem for which this fix is a solution. Fix this by moving the actual allocation outside of the scrub lock, and then only take the lock once we're ready to actually assign them to the fs_info. We'll now have to cleanup the workqueues in a few more places, so I've added a helper to do the refcount dance to safely free the workqueues. CC: stable@vger.kernel.org # 5.4+ Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2020-08-10 15:42:29 +00:00
if (refcount_inc_not_zero(&fs_info->scrub_workers_refcnt))
return 0;
scrub_workers = alloc_workqueue("btrfs-scrub", flags, max_active);
btrfs: allocate scrub workqueues outside of locks I got the following lockdep splat while testing: ====================================================== WARNING: possible circular locking dependency detected 5.8.0-rc7-00172-g021118712e59 #932 Not tainted ------------------------------------------------------ btrfs/229626 is trying to acquire lock: ffffffff828513f0 (cpu_hotplug_lock){++++}-{0:0}, at: alloc_workqueue+0x378/0x450 but task is already holding lock: ffff889dd3889518 (&fs_info->scrub_lock){+.+.}-{3:3}, at: btrfs_scrub_dev+0x11c/0x630 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #7 (&fs_info->scrub_lock){+.+.}-{3:3}: __mutex_lock+0x9f/0x930 btrfs_scrub_dev+0x11c/0x630 btrfs_dev_replace_by_ioctl.cold.21+0x10a/0x1d4 btrfs_ioctl+0x2799/0x30a0 ksys_ioctl+0x83/0xc0 __x64_sys_ioctl+0x16/0x20 do_syscall_64+0x50/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xa9 -> #6 (&fs_devs->device_list_mutex){+.+.}-{3:3}: __mutex_lock+0x9f/0x930 btrfs_run_dev_stats+0x49/0x480 commit_cowonly_roots+0xb5/0x2a0 btrfs_commit_transaction+0x516/0xa60 sync_filesystem+0x6b/0x90 generic_shutdown_super+0x22/0x100 kill_anon_super+0xe/0x30 btrfs_kill_super+0x12/0x20 deactivate_locked_super+0x29/0x60 cleanup_mnt+0xb8/0x140 task_work_run+0x6d/0xb0 __prepare_exit_to_usermode+0x1cc/0x1e0 do_syscall_64+0x5c/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xa9 -> #5 (&fs_info->tree_log_mutex){+.+.}-{3:3}: __mutex_lock+0x9f/0x930 btrfs_commit_transaction+0x4bb/0xa60 sync_filesystem+0x6b/0x90 generic_shutdown_super+0x22/0x100 kill_anon_super+0xe/0x30 btrfs_kill_super+0x12/0x20 deactivate_locked_super+0x29/0x60 cleanup_mnt+0xb8/0x140 task_work_run+0x6d/0xb0 __prepare_exit_to_usermode+0x1cc/0x1e0 do_syscall_64+0x5c/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xa9 -> #4 (&fs_info->reloc_mutex){+.+.}-{3:3}: __mutex_lock+0x9f/0x930 btrfs_record_root_in_trans+0x43/0x70 start_transaction+0xd1/0x5d0 btrfs_dirty_inode+0x42/0xd0 touch_atime+0xa1/0xd0 btrfs_file_mmap+0x3f/0x60 mmap_region+0x3a4/0x640 do_mmap+0x376/0x580 vm_mmap_pgoff+0xd5/0x120 ksys_mmap_pgoff+0x193/0x230 do_syscall_64+0x50/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xa9 -> #3 (&mm->mmap_lock#2){++++}-{3:3}: __might_fault+0x68/0x90 _copy_to_user+0x1e/0x80 perf_read+0x141/0x2c0 vfs_read+0xad/0x1b0 ksys_read+0x5f/0xe0 do_syscall_64+0x50/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xa9 -> #2 (&cpuctx_mutex){+.+.}-{3:3}: __mutex_lock+0x9f/0x930 perf_event_init_cpu+0x88/0x150 perf_event_init+0x1db/0x20b start_kernel+0x3ae/0x53c secondary_startup_64+0xa4/0xb0 -> #1 (pmus_lock){+.+.}-{3:3}: __mutex_lock+0x9f/0x930 perf_event_init_cpu+0x4f/0x150 cpuhp_invoke_callback+0xb1/0x900 _cpu_up.constprop.26+0x9f/0x130 cpu_up+0x7b/0xc0 bringup_nonboot_cpus+0x4f/0x60 smp_init+0x26/0x71 kernel_init_freeable+0x110/0x258 kernel_init+0xa/0x103 ret_from_fork+0x1f/0x30 -> #0 (cpu_hotplug_lock){++++}-{0:0}: __lock_acquire+0x1272/0x2310 lock_acquire+0x9e/0x360 cpus_read_lock+0x39/0xb0 alloc_workqueue+0x378/0x450 __btrfs_alloc_workqueue+0x15d/0x200 btrfs_alloc_workqueue+0x51/0x160 scrub_workers_get+0x5a/0x170 btrfs_scrub_dev+0x18c/0x630 btrfs_dev_replace_by_ioctl.cold.21+0x10a/0x1d4 btrfs_ioctl+0x2799/0x30a0 ksys_ioctl+0x83/0xc0 __x64_sys_ioctl+0x16/0x20 do_syscall_64+0x50/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xa9 other info that might help us debug this: Chain exists of: cpu_hotplug_lock --> &fs_devs->device_list_mutex --> &fs_info->scrub_lock Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&fs_info->scrub_lock); lock(&fs_devs->device_list_mutex); lock(&fs_info->scrub_lock); lock(cpu_hotplug_lock); *** DEADLOCK *** 2 locks held by btrfs/229626: #0: ffff88bfe8bb86e0 (&fs_devs->device_list_mutex){+.+.}-{3:3}, at: btrfs_scrub_dev+0xbd/0x630 #1: ffff889dd3889518 (&fs_info->scrub_lock){+.+.}-{3:3}, at: btrfs_scrub_dev+0x11c/0x630 stack backtrace: CPU: 15 PID: 229626 Comm: btrfs Kdump: loaded Not tainted 5.8.0-rc7-00172-g021118712e59 #932 Hardware name: Quanta Tioga Pass Single Side 01-0030993006/Tioga Pass Single Side, BIOS F08_3A18 12/20/2018 Call Trace: dump_stack+0x78/0xa0 check_noncircular+0x165/0x180 __lock_acquire+0x1272/0x2310 lock_acquire+0x9e/0x360 ? alloc_workqueue+0x378/0x450 cpus_read_lock+0x39/0xb0 ? alloc_workqueue+0x378/0x450 alloc_workqueue+0x378/0x450 ? rcu_read_lock_sched_held+0x52/0x80 __btrfs_alloc_workqueue+0x15d/0x200 btrfs_alloc_workqueue+0x51/0x160 scrub_workers_get+0x5a/0x170 btrfs_scrub_dev+0x18c/0x630 ? start_transaction+0xd1/0x5d0 btrfs_dev_replace_by_ioctl.cold.21+0x10a/0x1d4 btrfs_ioctl+0x2799/0x30a0 ? do_sigaction+0x102/0x250 ? lockdep_hardirqs_on_prepare+0xca/0x160 ? _raw_spin_unlock_irq+0x24/0x30 ? trace_hardirqs_on+0x1c/0xe0 ? _raw_spin_unlock_irq+0x24/0x30 ? do_sigaction+0x102/0x250 ? ksys_ioctl+0x83/0xc0 ksys_ioctl+0x83/0xc0 __x64_sys_ioctl+0x16/0x20 do_syscall_64+0x50/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xa9 This happens because we're allocating the scrub workqueues under the scrub and device list mutex, which brings in a whole host of other dependencies. Because the work queue allocation is done with GFP_KERNEL, it can trigger reclaim, which can lead to a transaction commit, which in turns needs the device_list_mutex, it can lead to a deadlock. A different problem for which this fix is a solution. Fix this by moving the actual allocation outside of the scrub lock, and then only take the lock once we're ready to actually assign them to the fs_info. We'll now have to cleanup the workqueues in a few more places, so I've added a helper to do the refcount dance to safely free the workqueues. CC: stable@vger.kernel.org # 5.4+ Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2020-08-10 15:42:29 +00:00
if (!scrub_workers)
return -ENOMEM;
btrfs: allocate scrub workqueues outside of locks I got the following lockdep splat while testing: ====================================================== WARNING: possible circular locking dependency detected 5.8.0-rc7-00172-g021118712e59 #932 Not tainted ------------------------------------------------------ btrfs/229626 is trying to acquire lock: ffffffff828513f0 (cpu_hotplug_lock){++++}-{0:0}, at: alloc_workqueue+0x378/0x450 but task is already holding lock: ffff889dd3889518 (&fs_info->scrub_lock){+.+.}-{3:3}, at: btrfs_scrub_dev+0x11c/0x630 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #7 (&fs_info->scrub_lock){+.+.}-{3:3}: __mutex_lock+0x9f/0x930 btrfs_scrub_dev+0x11c/0x630 btrfs_dev_replace_by_ioctl.cold.21+0x10a/0x1d4 btrfs_ioctl+0x2799/0x30a0 ksys_ioctl+0x83/0xc0 __x64_sys_ioctl+0x16/0x20 do_syscall_64+0x50/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xa9 -> #6 (&fs_devs->device_list_mutex){+.+.}-{3:3}: __mutex_lock+0x9f/0x930 btrfs_run_dev_stats+0x49/0x480 commit_cowonly_roots+0xb5/0x2a0 btrfs_commit_transaction+0x516/0xa60 sync_filesystem+0x6b/0x90 generic_shutdown_super+0x22/0x100 kill_anon_super+0xe/0x30 btrfs_kill_super+0x12/0x20 deactivate_locked_super+0x29/0x60 cleanup_mnt+0xb8/0x140 task_work_run+0x6d/0xb0 __prepare_exit_to_usermode+0x1cc/0x1e0 do_syscall_64+0x5c/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xa9 -> #5 (&fs_info->tree_log_mutex){+.+.}-{3:3}: __mutex_lock+0x9f/0x930 btrfs_commit_transaction+0x4bb/0xa60 sync_filesystem+0x6b/0x90 generic_shutdown_super+0x22/0x100 kill_anon_super+0xe/0x30 btrfs_kill_super+0x12/0x20 deactivate_locked_super+0x29/0x60 cleanup_mnt+0xb8/0x140 task_work_run+0x6d/0xb0 __prepare_exit_to_usermode+0x1cc/0x1e0 do_syscall_64+0x5c/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xa9 -> #4 (&fs_info->reloc_mutex){+.+.}-{3:3}: __mutex_lock+0x9f/0x930 btrfs_record_root_in_trans+0x43/0x70 start_transaction+0xd1/0x5d0 btrfs_dirty_inode+0x42/0xd0 touch_atime+0xa1/0xd0 btrfs_file_mmap+0x3f/0x60 mmap_region+0x3a4/0x640 do_mmap+0x376/0x580 vm_mmap_pgoff+0xd5/0x120 ksys_mmap_pgoff+0x193/0x230 do_syscall_64+0x50/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xa9 -> #3 (&mm->mmap_lock#2){++++}-{3:3}: __might_fault+0x68/0x90 _copy_to_user+0x1e/0x80 perf_read+0x141/0x2c0 vfs_read+0xad/0x1b0 ksys_read+0x5f/0xe0 do_syscall_64+0x50/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xa9 -> #2 (&cpuctx_mutex){+.+.}-{3:3}: __mutex_lock+0x9f/0x930 perf_event_init_cpu+0x88/0x150 perf_event_init+0x1db/0x20b start_kernel+0x3ae/0x53c secondary_startup_64+0xa4/0xb0 -> #1 (pmus_lock){+.+.}-{3:3}: __mutex_lock+0x9f/0x930 perf_event_init_cpu+0x4f/0x150 cpuhp_invoke_callback+0xb1/0x900 _cpu_up.constprop.26+0x9f/0x130 cpu_up+0x7b/0xc0 bringup_nonboot_cpus+0x4f/0x60 smp_init+0x26/0x71 kernel_init_freeable+0x110/0x258 kernel_init+0xa/0x103 ret_from_fork+0x1f/0x30 -> #0 (cpu_hotplug_lock){++++}-{0:0}: __lock_acquire+0x1272/0x2310 lock_acquire+0x9e/0x360 cpus_read_lock+0x39/0xb0 alloc_workqueue+0x378/0x450 __btrfs_alloc_workqueue+0x15d/0x200 btrfs_alloc_workqueue+0x51/0x160 scrub_workers_get+0x5a/0x170 btrfs_scrub_dev+0x18c/0x630 btrfs_dev_replace_by_ioctl.cold.21+0x10a/0x1d4 btrfs_ioctl+0x2799/0x30a0 ksys_ioctl+0x83/0xc0 __x64_sys_ioctl+0x16/0x20 do_syscall_64+0x50/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xa9 other info that might help us debug this: Chain exists of: cpu_hotplug_lock --> &fs_devs->device_list_mutex --> &fs_info->scrub_lock Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&fs_info->scrub_lock); lock(&fs_devs->device_list_mutex); lock(&fs_info->scrub_lock); lock(cpu_hotplug_lock); *** DEADLOCK *** 2 locks held by btrfs/229626: #0: ffff88bfe8bb86e0 (&fs_devs->device_list_mutex){+.+.}-{3:3}, at: btrfs_scrub_dev+0xbd/0x630 #1: ffff889dd3889518 (&fs_info->scrub_lock){+.+.}-{3:3}, at: btrfs_scrub_dev+0x11c/0x630 stack backtrace: CPU: 15 PID: 229626 Comm: btrfs Kdump: loaded Not tainted 5.8.0-rc7-00172-g021118712e59 #932 Hardware name: Quanta Tioga Pass Single Side 01-0030993006/Tioga Pass Single Side, BIOS F08_3A18 12/20/2018 Call Trace: dump_stack+0x78/0xa0 check_noncircular+0x165/0x180 __lock_acquire+0x1272/0x2310 lock_acquire+0x9e/0x360 ? alloc_workqueue+0x378/0x450 cpus_read_lock+0x39/0xb0 ? alloc_workqueue+0x378/0x450 alloc_workqueue+0x378/0x450 ? rcu_read_lock_sched_held+0x52/0x80 __btrfs_alloc_workqueue+0x15d/0x200 btrfs_alloc_workqueue+0x51/0x160 scrub_workers_get+0x5a/0x170 btrfs_scrub_dev+0x18c/0x630 ? start_transaction+0xd1/0x5d0 btrfs_dev_replace_by_ioctl.cold.21+0x10a/0x1d4 btrfs_ioctl+0x2799/0x30a0 ? do_sigaction+0x102/0x250 ? lockdep_hardirqs_on_prepare+0xca/0x160 ? _raw_spin_unlock_irq+0x24/0x30 ? trace_hardirqs_on+0x1c/0xe0 ? _raw_spin_unlock_irq+0x24/0x30 ? do_sigaction+0x102/0x250 ? ksys_ioctl+0x83/0xc0 ksys_ioctl+0x83/0xc0 __x64_sys_ioctl+0x16/0x20 do_syscall_64+0x50/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xa9 This happens because we're allocating the scrub workqueues under the scrub and device list mutex, which brings in a whole host of other dependencies. Because the work queue allocation is done with GFP_KERNEL, it can trigger reclaim, which can lead to a transaction commit, which in turns needs the device_list_mutex, it can lead to a deadlock. A different problem for which this fix is a solution. Fix this by moving the actual allocation outside of the scrub lock, and then only take the lock once we're ready to actually assign them to the fs_info. We'll now have to cleanup the workqueues in a few more places, so I've added a helper to do the refcount dance to safely free the workqueues. CC: stable@vger.kernel.org # 5.4+ Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2020-08-10 15:42:29 +00:00
mutex_lock(&fs_info->scrub_lock);
if (refcount_read(&fs_info->scrub_workers_refcnt) == 0) {
ASSERT(fs_info->scrub_workers == NULL);
btrfs: allocate scrub workqueues outside of locks I got the following lockdep splat while testing: ====================================================== WARNING: possible circular locking dependency detected 5.8.0-rc7-00172-g021118712e59 #932 Not tainted ------------------------------------------------------ btrfs/229626 is trying to acquire lock: ffffffff828513f0 (cpu_hotplug_lock){++++}-{0:0}, at: alloc_workqueue+0x378/0x450 but task is already holding lock: ffff889dd3889518 (&fs_info->scrub_lock){+.+.}-{3:3}, at: btrfs_scrub_dev+0x11c/0x630 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #7 (&fs_info->scrub_lock){+.+.}-{3:3}: __mutex_lock+0x9f/0x930 btrfs_scrub_dev+0x11c/0x630 btrfs_dev_replace_by_ioctl.cold.21+0x10a/0x1d4 btrfs_ioctl+0x2799/0x30a0 ksys_ioctl+0x83/0xc0 __x64_sys_ioctl+0x16/0x20 do_syscall_64+0x50/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xa9 -> #6 (&fs_devs->device_list_mutex){+.+.}-{3:3}: __mutex_lock+0x9f/0x930 btrfs_run_dev_stats+0x49/0x480 commit_cowonly_roots+0xb5/0x2a0 btrfs_commit_transaction+0x516/0xa60 sync_filesystem+0x6b/0x90 generic_shutdown_super+0x22/0x100 kill_anon_super+0xe/0x30 btrfs_kill_super+0x12/0x20 deactivate_locked_super+0x29/0x60 cleanup_mnt+0xb8/0x140 task_work_run+0x6d/0xb0 __prepare_exit_to_usermode+0x1cc/0x1e0 do_syscall_64+0x5c/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xa9 -> #5 (&fs_info->tree_log_mutex){+.+.}-{3:3}: __mutex_lock+0x9f/0x930 btrfs_commit_transaction+0x4bb/0xa60 sync_filesystem+0x6b/0x90 generic_shutdown_super+0x22/0x100 kill_anon_super+0xe/0x30 btrfs_kill_super+0x12/0x20 deactivate_locked_super+0x29/0x60 cleanup_mnt+0xb8/0x140 task_work_run+0x6d/0xb0 __prepare_exit_to_usermode+0x1cc/0x1e0 do_syscall_64+0x5c/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xa9 -> #4 (&fs_info->reloc_mutex){+.+.}-{3:3}: __mutex_lock+0x9f/0x930 btrfs_record_root_in_trans+0x43/0x70 start_transaction+0xd1/0x5d0 btrfs_dirty_inode+0x42/0xd0 touch_atime+0xa1/0xd0 btrfs_file_mmap+0x3f/0x60 mmap_region+0x3a4/0x640 do_mmap+0x376/0x580 vm_mmap_pgoff+0xd5/0x120 ksys_mmap_pgoff+0x193/0x230 do_syscall_64+0x50/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xa9 -> #3 (&mm->mmap_lock#2){++++}-{3:3}: __might_fault+0x68/0x90 _copy_to_user+0x1e/0x80 perf_read+0x141/0x2c0 vfs_read+0xad/0x1b0 ksys_read+0x5f/0xe0 do_syscall_64+0x50/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xa9 -> #2 (&cpuctx_mutex){+.+.}-{3:3}: __mutex_lock+0x9f/0x930 perf_event_init_cpu+0x88/0x150 perf_event_init+0x1db/0x20b start_kernel+0x3ae/0x53c secondary_startup_64+0xa4/0xb0 -> #1 (pmus_lock){+.+.}-{3:3}: __mutex_lock+0x9f/0x930 perf_event_init_cpu+0x4f/0x150 cpuhp_invoke_callback+0xb1/0x900 _cpu_up.constprop.26+0x9f/0x130 cpu_up+0x7b/0xc0 bringup_nonboot_cpus+0x4f/0x60 smp_init+0x26/0x71 kernel_init_freeable+0x110/0x258 kernel_init+0xa/0x103 ret_from_fork+0x1f/0x30 -> #0 (cpu_hotplug_lock){++++}-{0:0}: __lock_acquire+0x1272/0x2310 lock_acquire+0x9e/0x360 cpus_read_lock+0x39/0xb0 alloc_workqueue+0x378/0x450 __btrfs_alloc_workqueue+0x15d/0x200 btrfs_alloc_workqueue+0x51/0x160 scrub_workers_get+0x5a/0x170 btrfs_scrub_dev+0x18c/0x630 btrfs_dev_replace_by_ioctl.cold.21+0x10a/0x1d4 btrfs_ioctl+0x2799/0x30a0 ksys_ioctl+0x83/0xc0 __x64_sys_ioctl+0x16/0x20 do_syscall_64+0x50/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xa9 other info that might help us debug this: Chain exists of: cpu_hotplug_lock --> &fs_devs->device_list_mutex --> &fs_info->scrub_lock Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&fs_info->scrub_lock); lock(&fs_devs->device_list_mutex); lock(&fs_info->scrub_lock); lock(cpu_hotplug_lock); *** DEADLOCK *** 2 locks held by btrfs/229626: #0: ffff88bfe8bb86e0 (&fs_devs->device_list_mutex){+.+.}-{3:3}, at: btrfs_scrub_dev+0xbd/0x630 #1: ffff889dd3889518 (&fs_info->scrub_lock){+.+.}-{3:3}, at: btrfs_scrub_dev+0x11c/0x630 stack backtrace: CPU: 15 PID: 229626 Comm: btrfs Kdump: loaded Not tainted 5.8.0-rc7-00172-g021118712e59 #932 Hardware name: Quanta Tioga Pass Single Side 01-0030993006/Tioga Pass Single Side, BIOS F08_3A18 12/20/2018 Call Trace: dump_stack+0x78/0xa0 check_noncircular+0x165/0x180 __lock_acquire+0x1272/0x2310 lock_acquire+0x9e/0x360 ? alloc_workqueue+0x378/0x450 cpus_read_lock+0x39/0xb0 ? alloc_workqueue+0x378/0x450 alloc_workqueue+0x378/0x450 ? rcu_read_lock_sched_held+0x52/0x80 __btrfs_alloc_workqueue+0x15d/0x200 btrfs_alloc_workqueue+0x51/0x160 scrub_workers_get+0x5a/0x170 btrfs_scrub_dev+0x18c/0x630 ? start_transaction+0xd1/0x5d0 btrfs_dev_replace_by_ioctl.cold.21+0x10a/0x1d4 btrfs_ioctl+0x2799/0x30a0 ? do_sigaction+0x102/0x250 ? lockdep_hardirqs_on_prepare+0xca/0x160 ? _raw_spin_unlock_irq+0x24/0x30 ? trace_hardirqs_on+0x1c/0xe0 ? _raw_spin_unlock_irq+0x24/0x30 ? do_sigaction+0x102/0x250 ? ksys_ioctl+0x83/0xc0 ksys_ioctl+0x83/0xc0 __x64_sys_ioctl+0x16/0x20 do_syscall_64+0x50/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xa9 This happens because we're allocating the scrub workqueues under the scrub and device list mutex, which brings in a whole host of other dependencies. Because the work queue allocation is done with GFP_KERNEL, it can trigger reclaim, which can lead to a transaction commit, which in turns needs the device_list_mutex, it can lead to a deadlock. A different problem for which this fix is a solution. Fix this by moving the actual allocation outside of the scrub lock, and then only take the lock once we're ready to actually assign them to the fs_info. We'll now have to cleanup the workqueues in a few more places, so I've added a helper to do the refcount dance to safely free the workqueues. CC: stable@vger.kernel.org # 5.4+ Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2020-08-10 15:42:29 +00:00
fs_info->scrub_workers = scrub_workers;
refcount_set(&fs_info->scrub_workers_refcnt, 1);
btrfs: allocate scrub workqueues outside of locks I got the following lockdep splat while testing: ====================================================== WARNING: possible circular locking dependency detected 5.8.0-rc7-00172-g021118712e59 #932 Not tainted ------------------------------------------------------ btrfs/229626 is trying to acquire lock: ffffffff828513f0 (cpu_hotplug_lock){++++}-{0:0}, at: alloc_workqueue+0x378/0x450 but task is already holding lock: ffff889dd3889518 (&fs_info->scrub_lock){+.+.}-{3:3}, at: btrfs_scrub_dev+0x11c/0x630 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #7 (&fs_info->scrub_lock){+.+.}-{3:3}: __mutex_lock+0x9f/0x930 btrfs_scrub_dev+0x11c/0x630 btrfs_dev_replace_by_ioctl.cold.21+0x10a/0x1d4 btrfs_ioctl+0x2799/0x30a0 ksys_ioctl+0x83/0xc0 __x64_sys_ioctl+0x16/0x20 do_syscall_64+0x50/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xa9 -> #6 (&fs_devs->device_list_mutex){+.+.}-{3:3}: __mutex_lock+0x9f/0x930 btrfs_run_dev_stats+0x49/0x480 commit_cowonly_roots+0xb5/0x2a0 btrfs_commit_transaction+0x516/0xa60 sync_filesystem+0x6b/0x90 generic_shutdown_super+0x22/0x100 kill_anon_super+0xe/0x30 btrfs_kill_super+0x12/0x20 deactivate_locked_super+0x29/0x60 cleanup_mnt+0xb8/0x140 task_work_run+0x6d/0xb0 __prepare_exit_to_usermode+0x1cc/0x1e0 do_syscall_64+0x5c/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xa9 -> #5 (&fs_info->tree_log_mutex){+.+.}-{3:3}: __mutex_lock+0x9f/0x930 btrfs_commit_transaction+0x4bb/0xa60 sync_filesystem+0x6b/0x90 generic_shutdown_super+0x22/0x100 kill_anon_super+0xe/0x30 btrfs_kill_super+0x12/0x20 deactivate_locked_super+0x29/0x60 cleanup_mnt+0xb8/0x140 task_work_run+0x6d/0xb0 __prepare_exit_to_usermode+0x1cc/0x1e0 do_syscall_64+0x5c/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xa9 -> #4 (&fs_info->reloc_mutex){+.+.}-{3:3}: __mutex_lock+0x9f/0x930 btrfs_record_root_in_trans+0x43/0x70 start_transaction+0xd1/0x5d0 btrfs_dirty_inode+0x42/0xd0 touch_atime+0xa1/0xd0 btrfs_file_mmap+0x3f/0x60 mmap_region+0x3a4/0x640 do_mmap+0x376/0x580 vm_mmap_pgoff+0xd5/0x120 ksys_mmap_pgoff+0x193/0x230 do_syscall_64+0x50/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xa9 -> #3 (&mm->mmap_lock#2){++++}-{3:3}: __might_fault+0x68/0x90 _copy_to_user+0x1e/0x80 perf_read+0x141/0x2c0 vfs_read+0xad/0x1b0 ksys_read+0x5f/0xe0 do_syscall_64+0x50/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xa9 -> #2 (&cpuctx_mutex){+.+.}-{3:3}: __mutex_lock+0x9f/0x930 perf_event_init_cpu+0x88/0x150 perf_event_init+0x1db/0x20b start_kernel+0x3ae/0x53c secondary_startup_64+0xa4/0xb0 -> #1 (pmus_lock){+.+.}-{3:3}: __mutex_lock+0x9f/0x930 perf_event_init_cpu+0x4f/0x150 cpuhp_invoke_callback+0xb1/0x900 _cpu_up.constprop.26+0x9f/0x130 cpu_up+0x7b/0xc0 bringup_nonboot_cpus+0x4f/0x60 smp_init+0x26/0x71 kernel_init_freeable+0x110/0x258 kernel_init+0xa/0x103 ret_from_fork+0x1f/0x30 -> #0 (cpu_hotplug_lock){++++}-{0:0}: __lock_acquire+0x1272/0x2310 lock_acquire+0x9e/0x360 cpus_read_lock+0x39/0xb0 alloc_workqueue+0x378/0x450 __btrfs_alloc_workqueue+0x15d/0x200 btrfs_alloc_workqueue+0x51/0x160 scrub_workers_get+0x5a/0x170 btrfs_scrub_dev+0x18c/0x630 btrfs_dev_replace_by_ioctl.cold.21+0x10a/0x1d4 btrfs_ioctl+0x2799/0x30a0 ksys_ioctl+0x83/0xc0 __x64_sys_ioctl+0x16/0x20 do_syscall_64+0x50/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xa9 other info that might help us debug this: Chain exists of: cpu_hotplug_lock --> &fs_devs->device_list_mutex --> &fs_info->scrub_lock Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&fs_info->scrub_lock); lock(&fs_devs->device_list_mutex); lock(&fs_info->scrub_lock); lock(cpu_hotplug_lock); *** DEADLOCK *** 2 locks held by btrfs/229626: #0: ffff88bfe8bb86e0 (&fs_devs->device_list_mutex){+.+.}-{3:3}, at: btrfs_scrub_dev+0xbd/0x630 #1: ffff889dd3889518 (&fs_info->scrub_lock){+.+.}-{3:3}, at: btrfs_scrub_dev+0x11c/0x630 stack backtrace: CPU: 15 PID: 229626 Comm: btrfs Kdump: loaded Not tainted 5.8.0-rc7-00172-g021118712e59 #932 Hardware name: Quanta Tioga Pass Single Side 01-0030993006/Tioga Pass Single Side, BIOS F08_3A18 12/20/2018 Call Trace: dump_stack+0x78/0xa0 check_noncircular+0x165/0x180 __lock_acquire+0x1272/0x2310 lock_acquire+0x9e/0x360 ? alloc_workqueue+0x378/0x450 cpus_read_lock+0x39/0xb0 ? alloc_workqueue+0x378/0x450 alloc_workqueue+0x378/0x450 ? rcu_read_lock_sched_held+0x52/0x80 __btrfs_alloc_workqueue+0x15d/0x200 btrfs_alloc_workqueue+0x51/0x160 scrub_workers_get+0x5a/0x170 btrfs_scrub_dev+0x18c/0x630 ? start_transaction+0xd1/0x5d0 btrfs_dev_replace_by_ioctl.cold.21+0x10a/0x1d4 btrfs_ioctl+0x2799/0x30a0 ? do_sigaction+0x102/0x250 ? lockdep_hardirqs_on_prepare+0xca/0x160 ? _raw_spin_unlock_irq+0x24/0x30 ? trace_hardirqs_on+0x1c/0xe0 ? _raw_spin_unlock_irq+0x24/0x30 ? do_sigaction+0x102/0x250 ? ksys_ioctl+0x83/0xc0 ksys_ioctl+0x83/0xc0 __x64_sys_ioctl+0x16/0x20 do_syscall_64+0x50/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xa9 This happens because we're allocating the scrub workqueues under the scrub and device list mutex, which brings in a whole host of other dependencies. Because the work queue allocation is done with GFP_KERNEL, it can trigger reclaim, which can lead to a transaction commit, which in turns needs the device_list_mutex, it can lead to a deadlock. A different problem for which this fix is a solution. Fix this by moving the actual allocation outside of the scrub lock, and then only take the lock once we're ready to actually assign them to the fs_info. We'll now have to cleanup the workqueues in a few more places, so I've added a helper to do the refcount dance to safely free the workqueues. CC: stable@vger.kernel.org # 5.4+ Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2020-08-10 15:42:29 +00:00
mutex_unlock(&fs_info->scrub_lock);
return 0;
}
btrfs: allocate scrub workqueues outside of locks I got the following lockdep splat while testing: ====================================================== WARNING: possible circular locking dependency detected 5.8.0-rc7-00172-g021118712e59 #932 Not tainted ------------------------------------------------------ btrfs/229626 is trying to acquire lock: ffffffff828513f0 (cpu_hotplug_lock){++++}-{0:0}, at: alloc_workqueue+0x378/0x450 but task is already holding lock: ffff889dd3889518 (&fs_info->scrub_lock){+.+.}-{3:3}, at: btrfs_scrub_dev+0x11c/0x630 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #7 (&fs_info->scrub_lock){+.+.}-{3:3}: __mutex_lock+0x9f/0x930 btrfs_scrub_dev+0x11c/0x630 btrfs_dev_replace_by_ioctl.cold.21+0x10a/0x1d4 btrfs_ioctl+0x2799/0x30a0 ksys_ioctl+0x83/0xc0 __x64_sys_ioctl+0x16/0x20 do_syscall_64+0x50/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xa9 -> #6 (&fs_devs->device_list_mutex){+.+.}-{3:3}: __mutex_lock+0x9f/0x930 btrfs_run_dev_stats+0x49/0x480 commit_cowonly_roots+0xb5/0x2a0 btrfs_commit_transaction+0x516/0xa60 sync_filesystem+0x6b/0x90 generic_shutdown_super+0x22/0x100 kill_anon_super+0xe/0x30 btrfs_kill_super+0x12/0x20 deactivate_locked_super+0x29/0x60 cleanup_mnt+0xb8/0x140 task_work_run+0x6d/0xb0 __prepare_exit_to_usermode+0x1cc/0x1e0 do_syscall_64+0x5c/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xa9 -> #5 (&fs_info->tree_log_mutex){+.+.}-{3:3}: __mutex_lock+0x9f/0x930 btrfs_commit_transaction+0x4bb/0xa60 sync_filesystem+0x6b/0x90 generic_shutdown_super+0x22/0x100 kill_anon_super+0xe/0x30 btrfs_kill_super+0x12/0x20 deactivate_locked_super+0x29/0x60 cleanup_mnt+0xb8/0x140 task_work_run+0x6d/0xb0 __prepare_exit_to_usermode+0x1cc/0x1e0 do_syscall_64+0x5c/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xa9 -> #4 (&fs_info->reloc_mutex){+.+.}-{3:3}: __mutex_lock+0x9f/0x930 btrfs_record_root_in_trans+0x43/0x70 start_transaction+0xd1/0x5d0 btrfs_dirty_inode+0x42/0xd0 touch_atime+0xa1/0xd0 btrfs_file_mmap+0x3f/0x60 mmap_region+0x3a4/0x640 do_mmap+0x376/0x580 vm_mmap_pgoff+0xd5/0x120 ksys_mmap_pgoff+0x193/0x230 do_syscall_64+0x50/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xa9 -> #3 (&mm->mmap_lock#2){++++}-{3:3}: __might_fault+0x68/0x90 _copy_to_user+0x1e/0x80 perf_read+0x141/0x2c0 vfs_read+0xad/0x1b0 ksys_read+0x5f/0xe0 do_syscall_64+0x50/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xa9 -> #2 (&cpuctx_mutex){+.+.}-{3:3}: __mutex_lock+0x9f/0x930 perf_event_init_cpu+0x88/0x150 perf_event_init+0x1db/0x20b start_kernel+0x3ae/0x53c secondary_startup_64+0xa4/0xb0 -> #1 (pmus_lock){+.+.}-{3:3}: __mutex_lock+0x9f/0x930 perf_event_init_cpu+0x4f/0x150 cpuhp_invoke_callback+0xb1/0x900 _cpu_up.constprop.26+0x9f/0x130 cpu_up+0x7b/0xc0 bringup_nonboot_cpus+0x4f/0x60 smp_init+0x26/0x71 kernel_init_freeable+0x110/0x258 kernel_init+0xa/0x103 ret_from_fork+0x1f/0x30 -> #0 (cpu_hotplug_lock){++++}-{0:0}: __lock_acquire+0x1272/0x2310 lock_acquire+0x9e/0x360 cpus_read_lock+0x39/0xb0 alloc_workqueue+0x378/0x450 __btrfs_alloc_workqueue+0x15d/0x200 btrfs_alloc_workqueue+0x51/0x160 scrub_workers_get+0x5a/0x170 btrfs_scrub_dev+0x18c/0x630 btrfs_dev_replace_by_ioctl.cold.21+0x10a/0x1d4 btrfs_ioctl+0x2799/0x30a0 ksys_ioctl+0x83/0xc0 __x64_sys_ioctl+0x16/0x20 do_syscall_64+0x50/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xa9 other info that might help us debug this: Chain exists of: cpu_hotplug_lock --> &fs_devs->device_list_mutex --> &fs_info->scrub_lock Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&fs_info->scrub_lock); lock(&fs_devs->device_list_mutex); lock(&fs_info->scrub_lock); lock(cpu_hotplug_lock); *** DEADLOCK *** 2 locks held by btrfs/229626: #0: ffff88bfe8bb86e0 (&fs_devs->device_list_mutex){+.+.}-{3:3}, at: btrfs_scrub_dev+0xbd/0x630 #1: ffff889dd3889518 (&fs_info->scrub_lock){+.+.}-{3:3}, at: btrfs_scrub_dev+0x11c/0x630 stack backtrace: CPU: 15 PID: 229626 Comm: btrfs Kdump: loaded Not tainted 5.8.0-rc7-00172-g021118712e59 #932 Hardware name: Quanta Tioga Pass Single Side 01-0030993006/Tioga Pass Single Side, BIOS F08_3A18 12/20/2018 Call Trace: dump_stack+0x78/0xa0 check_noncircular+0x165/0x180 __lock_acquire+0x1272/0x2310 lock_acquire+0x9e/0x360 ? alloc_workqueue+0x378/0x450 cpus_read_lock+0x39/0xb0 ? alloc_workqueue+0x378/0x450 alloc_workqueue+0x378/0x450 ? rcu_read_lock_sched_held+0x52/0x80 __btrfs_alloc_workqueue+0x15d/0x200 btrfs_alloc_workqueue+0x51/0x160 scrub_workers_get+0x5a/0x170 btrfs_scrub_dev+0x18c/0x630 ? start_transaction+0xd1/0x5d0 btrfs_dev_replace_by_ioctl.cold.21+0x10a/0x1d4 btrfs_ioctl+0x2799/0x30a0 ? do_sigaction+0x102/0x250 ? lockdep_hardirqs_on_prepare+0xca/0x160 ? _raw_spin_unlock_irq+0x24/0x30 ? trace_hardirqs_on+0x1c/0xe0 ? _raw_spin_unlock_irq+0x24/0x30 ? do_sigaction+0x102/0x250 ? ksys_ioctl+0x83/0xc0 ksys_ioctl+0x83/0xc0 __x64_sys_ioctl+0x16/0x20 do_syscall_64+0x50/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xa9 This happens because we're allocating the scrub workqueues under the scrub and device list mutex, which brings in a whole host of other dependencies. Because the work queue allocation is done with GFP_KERNEL, it can trigger reclaim, which can lead to a transaction commit, which in turns needs the device_list_mutex, it can lead to a deadlock. A different problem for which this fix is a solution. Fix this by moving the actual allocation outside of the scrub lock, and then only take the lock once we're ready to actually assign them to the fs_info. We'll now have to cleanup the workqueues in a few more places, so I've added a helper to do the refcount dance to safely free the workqueues. CC: stable@vger.kernel.org # 5.4+ Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2020-08-10 15:42:29 +00:00
/* Other thread raced in and created the workers for us */
refcount_inc(&fs_info->scrub_workers_refcnt);
mutex_unlock(&fs_info->scrub_lock);
btrfs: allocate scrub workqueues outside of locks I got the following lockdep splat while testing: ====================================================== WARNING: possible circular locking dependency detected 5.8.0-rc7-00172-g021118712e59 #932 Not tainted ------------------------------------------------------ btrfs/229626 is trying to acquire lock: ffffffff828513f0 (cpu_hotplug_lock){++++}-{0:0}, at: alloc_workqueue+0x378/0x450 but task is already holding lock: ffff889dd3889518 (&fs_info->scrub_lock){+.+.}-{3:3}, at: btrfs_scrub_dev+0x11c/0x630 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #7 (&fs_info->scrub_lock){+.+.}-{3:3}: __mutex_lock+0x9f/0x930 btrfs_scrub_dev+0x11c/0x630 btrfs_dev_replace_by_ioctl.cold.21+0x10a/0x1d4 btrfs_ioctl+0x2799/0x30a0 ksys_ioctl+0x83/0xc0 __x64_sys_ioctl+0x16/0x20 do_syscall_64+0x50/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xa9 -> #6 (&fs_devs->device_list_mutex){+.+.}-{3:3}: __mutex_lock+0x9f/0x930 btrfs_run_dev_stats+0x49/0x480 commit_cowonly_roots+0xb5/0x2a0 btrfs_commit_transaction+0x516/0xa60 sync_filesystem+0x6b/0x90 generic_shutdown_super+0x22/0x100 kill_anon_super+0xe/0x30 btrfs_kill_super+0x12/0x20 deactivate_locked_super+0x29/0x60 cleanup_mnt+0xb8/0x140 task_work_run+0x6d/0xb0 __prepare_exit_to_usermode+0x1cc/0x1e0 do_syscall_64+0x5c/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xa9 -> #5 (&fs_info->tree_log_mutex){+.+.}-{3:3}: __mutex_lock+0x9f/0x930 btrfs_commit_transaction+0x4bb/0xa60 sync_filesystem+0x6b/0x90 generic_shutdown_super+0x22/0x100 kill_anon_super+0xe/0x30 btrfs_kill_super+0x12/0x20 deactivate_locked_super+0x29/0x60 cleanup_mnt+0xb8/0x140 task_work_run+0x6d/0xb0 __prepare_exit_to_usermode+0x1cc/0x1e0 do_syscall_64+0x5c/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xa9 -> #4 (&fs_info->reloc_mutex){+.+.}-{3:3}: __mutex_lock+0x9f/0x930 btrfs_record_root_in_trans+0x43/0x70 start_transaction+0xd1/0x5d0 btrfs_dirty_inode+0x42/0xd0 touch_atime+0xa1/0xd0 btrfs_file_mmap+0x3f/0x60 mmap_region+0x3a4/0x640 do_mmap+0x376/0x580 vm_mmap_pgoff+0xd5/0x120 ksys_mmap_pgoff+0x193/0x230 do_syscall_64+0x50/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xa9 -> #3 (&mm->mmap_lock#2){++++}-{3:3}: __might_fault+0x68/0x90 _copy_to_user+0x1e/0x80 perf_read+0x141/0x2c0 vfs_read+0xad/0x1b0 ksys_read+0x5f/0xe0 do_syscall_64+0x50/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xa9 -> #2 (&cpuctx_mutex){+.+.}-{3:3}: __mutex_lock+0x9f/0x930 perf_event_init_cpu+0x88/0x150 perf_event_init+0x1db/0x20b start_kernel+0x3ae/0x53c secondary_startup_64+0xa4/0xb0 -> #1 (pmus_lock){+.+.}-{3:3}: __mutex_lock+0x9f/0x930 perf_event_init_cpu+0x4f/0x150 cpuhp_invoke_callback+0xb1/0x900 _cpu_up.constprop.26+0x9f/0x130 cpu_up+0x7b/0xc0 bringup_nonboot_cpus+0x4f/0x60 smp_init+0x26/0x71 kernel_init_freeable+0x110/0x258 kernel_init+0xa/0x103 ret_from_fork+0x1f/0x30 -> #0 (cpu_hotplug_lock){++++}-{0:0}: __lock_acquire+0x1272/0x2310 lock_acquire+0x9e/0x360 cpus_read_lock+0x39/0xb0 alloc_workqueue+0x378/0x450 __btrfs_alloc_workqueue+0x15d/0x200 btrfs_alloc_workqueue+0x51/0x160 scrub_workers_get+0x5a/0x170 btrfs_scrub_dev+0x18c/0x630 btrfs_dev_replace_by_ioctl.cold.21+0x10a/0x1d4 btrfs_ioctl+0x2799/0x30a0 ksys_ioctl+0x83/0xc0 __x64_sys_ioctl+0x16/0x20 do_syscall_64+0x50/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xa9 other info that might help us debug this: Chain exists of: cpu_hotplug_lock --> &fs_devs->device_list_mutex --> &fs_info->scrub_lock Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&fs_info->scrub_lock); lock(&fs_devs->device_list_mutex); lock(&fs_info->scrub_lock); lock(cpu_hotplug_lock); *** DEADLOCK *** 2 locks held by btrfs/229626: #0: ffff88bfe8bb86e0 (&fs_devs->device_list_mutex){+.+.}-{3:3}, at: btrfs_scrub_dev+0xbd/0x630 #1: ffff889dd3889518 (&fs_info->scrub_lock){+.+.}-{3:3}, at: btrfs_scrub_dev+0x11c/0x630 stack backtrace: CPU: 15 PID: 229626 Comm: btrfs Kdump: loaded Not tainted 5.8.0-rc7-00172-g021118712e59 #932 Hardware name: Quanta Tioga Pass Single Side 01-0030993006/Tioga Pass Single Side, BIOS F08_3A18 12/20/2018 Call Trace: dump_stack+0x78/0xa0 check_noncircular+0x165/0x180 __lock_acquire+0x1272/0x2310 lock_acquire+0x9e/0x360 ? alloc_workqueue+0x378/0x450 cpus_read_lock+0x39/0xb0 ? alloc_workqueue+0x378/0x450 alloc_workqueue+0x378/0x450 ? rcu_read_lock_sched_held+0x52/0x80 __btrfs_alloc_workqueue+0x15d/0x200 btrfs_alloc_workqueue+0x51/0x160 scrub_workers_get+0x5a/0x170 btrfs_scrub_dev+0x18c/0x630 ? start_transaction+0xd1/0x5d0 btrfs_dev_replace_by_ioctl.cold.21+0x10a/0x1d4 btrfs_ioctl+0x2799/0x30a0 ? do_sigaction+0x102/0x250 ? lockdep_hardirqs_on_prepare+0xca/0x160 ? _raw_spin_unlock_irq+0x24/0x30 ? trace_hardirqs_on+0x1c/0xe0 ? _raw_spin_unlock_irq+0x24/0x30 ? do_sigaction+0x102/0x250 ? ksys_ioctl+0x83/0xc0 ksys_ioctl+0x83/0xc0 __x64_sys_ioctl+0x16/0x20 do_syscall_64+0x50/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xa9 This happens because we're allocating the scrub workqueues under the scrub and device list mutex, which brings in a whole host of other dependencies. Because the work queue allocation is done with GFP_KERNEL, it can trigger reclaim, which can lead to a transaction commit, which in turns needs the device_list_mutex, it can lead to a deadlock. A different problem for which this fix is a solution. Fix this by moving the actual allocation outside of the scrub lock, and then only take the lock once we're ready to actually assign them to the fs_info. We'll now have to cleanup the workqueues in a few more places, so I've added a helper to do the refcount dance to safely free the workqueues. CC: stable@vger.kernel.org # 5.4+ Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2020-08-10 15:42:29 +00:00
ret = 0;
btrfs: scrub: remove scrub_parity structure The structure scrub_parity is used to indicate that some extents are scrubbed for the purpose of RAID56 P/Q scrubbing. Since the whole RAID56 P/Q scrubbing path has been replaced with new scrub_stripe infrastructure, and we no longer need to use scrub_parity to modify the behavior of data stripes, we can remove it completely. This removal involves: - scrub_parity_workers Now only one worker would be utilized, scrub_workers, to do the read and repair. All writeback would happen at the main scrub thread. - scrub_block::sparity member - scrub_parity structure - function scrub_parity_get() - function scrub_parity_put() - function scrub_free_parity() - function __scrub_mark_bitmap() - function scrub_parity_mark_sectors_error() - function scrub_parity_mark_sectors_data() These helpers are no longer needed, scrub_stripe has its bitmaps and we can use bitmap helpers to get the error/data status. - scrub_parity_bio_endio() - scrub_parity_check_and_repair() - function scrub_sectors_for_parity() - function scrub_extent_for_parity() - function scrub_raid56_data_stripe_for_parity() - function scrub_raid56_parity() The new code would reuse the scrub read-repair and writeback path. Just skip the dev-replace phase. And scrub_stripe infrastructure allows us to submit and wait for those data stripes before scrubbing P/Q, without extra infrastructure. The following two functions are temporarily exported for later cleanup: - scrub_find_csum() - scrub_add_sector_to_rd_bio() Signed-off-by: Qu Wenruo <wqu@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2023-03-29 05:55:20 +00:00
destroy_workqueue(scrub_workers);
btrfs: allocate scrub workqueues outside of locks I got the following lockdep splat while testing: ====================================================== WARNING: possible circular locking dependency detected 5.8.0-rc7-00172-g021118712e59 #932 Not tainted ------------------------------------------------------ btrfs/229626 is trying to acquire lock: ffffffff828513f0 (cpu_hotplug_lock){++++}-{0:0}, at: alloc_workqueue+0x378/0x450 but task is already holding lock: ffff889dd3889518 (&fs_info->scrub_lock){+.+.}-{3:3}, at: btrfs_scrub_dev+0x11c/0x630 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #7 (&fs_info->scrub_lock){+.+.}-{3:3}: __mutex_lock+0x9f/0x930 btrfs_scrub_dev+0x11c/0x630 btrfs_dev_replace_by_ioctl.cold.21+0x10a/0x1d4 btrfs_ioctl+0x2799/0x30a0 ksys_ioctl+0x83/0xc0 __x64_sys_ioctl+0x16/0x20 do_syscall_64+0x50/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xa9 -> #6 (&fs_devs->device_list_mutex){+.+.}-{3:3}: __mutex_lock+0x9f/0x930 btrfs_run_dev_stats+0x49/0x480 commit_cowonly_roots+0xb5/0x2a0 btrfs_commit_transaction+0x516/0xa60 sync_filesystem+0x6b/0x90 generic_shutdown_super+0x22/0x100 kill_anon_super+0xe/0x30 btrfs_kill_super+0x12/0x20 deactivate_locked_super+0x29/0x60 cleanup_mnt+0xb8/0x140 task_work_run+0x6d/0xb0 __prepare_exit_to_usermode+0x1cc/0x1e0 do_syscall_64+0x5c/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xa9 -> #5 (&fs_info->tree_log_mutex){+.+.}-{3:3}: __mutex_lock+0x9f/0x930 btrfs_commit_transaction+0x4bb/0xa60 sync_filesystem+0x6b/0x90 generic_shutdown_super+0x22/0x100 kill_anon_super+0xe/0x30 btrfs_kill_super+0x12/0x20 deactivate_locked_super+0x29/0x60 cleanup_mnt+0xb8/0x140 task_work_run+0x6d/0xb0 __prepare_exit_to_usermode+0x1cc/0x1e0 do_syscall_64+0x5c/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xa9 -> #4 (&fs_info->reloc_mutex){+.+.}-{3:3}: __mutex_lock+0x9f/0x930 btrfs_record_root_in_trans+0x43/0x70 start_transaction+0xd1/0x5d0 btrfs_dirty_inode+0x42/0xd0 touch_atime+0xa1/0xd0 btrfs_file_mmap+0x3f/0x60 mmap_region+0x3a4/0x640 do_mmap+0x376/0x580 vm_mmap_pgoff+0xd5/0x120 ksys_mmap_pgoff+0x193/0x230 do_syscall_64+0x50/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xa9 -> #3 (&mm->mmap_lock#2){++++}-{3:3}: __might_fault+0x68/0x90 _copy_to_user+0x1e/0x80 perf_read+0x141/0x2c0 vfs_read+0xad/0x1b0 ksys_read+0x5f/0xe0 do_syscall_64+0x50/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xa9 -> #2 (&cpuctx_mutex){+.+.}-{3:3}: __mutex_lock+0x9f/0x930 perf_event_init_cpu+0x88/0x150 perf_event_init+0x1db/0x20b start_kernel+0x3ae/0x53c secondary_startup_64+0xa4/0xb0 -> #1 (pmus_lock){+.+.}-{3:3}: __mutex_lock+0x9f/0x930 perf_event_init_cpu+0x4f/0x150 cpuhp_invoke_callback+0xb1/0x900 _cpu_up.constprop.26+0x9f/0x130 cpu_up+0x7b/0xc0 bringup_nonboot_cpus+0x4f/0x60 smp_init+0x26/0x71 kernel_init_freeable+0x110/0x258 kernel_init+0xa/0x103 ret_from_fork+0x1f/0x30 -> #0 (cpu_hotplug_lock){++++}-{0:0}: __lock_acquire+0x1272/0x2310 lock_acquire+0x9e/0x360 cpus_read_lock+0x39/0xb0 alloc_workqueue+0x378/0x450 __btrfs_alloc_workqueue+0x15d/0x200 btrfs_alloc_workqueue+0x51/0x160 scrub_workers_get+0x5a/0x170 btrfs_scrub_dev+0x18c/0x630 btrfs_dev_replace_by_ioctl.cold.21+0x10a/0x1d4 btrfs_ioctl+0x2799/0x30a0 ksys_ioctl+0x83/0xc0 __x64_sys_ioctl+0x16/0x20 do_syscall_64+0x50/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xa9 other info that might help us debug this: Chain exists of: cpu_hotplug_lock --> &fs_devs->device_list_mutex --> &fs_info->scrub_lock Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&fs_info->scrub_lock); lock(&fs_devs->device_list_mutex); lock(&fs_info->scrub_lock); lock(cpu_hotplug_lock); *** DEADLOCK *** 2 locks held by btrfs/229626: #0: ffff88bfe8bb86e0 (&fs_devs->device_list_mutex){+.+.}-{3:3}, at: btrfs_scrub_dev+0xbd/0x630 #1: ffff889dd3889518 (&fs_info->scrub_lock){+.+.}-{3:3}, at: btrfs_scrub_dev+0x11c/0x630 stack backtrace: CPU: 15 PID: 229626 Comm: btrfs Kdump: loaded Not tainted 5.8.0-rc7-00172-g021118712e59 #932 Hardware name: Quanta Tioga Pass Single Side 01-0030993006/Tioga Pass Single Side, BIOS F08_3A18 12/20/2018 Call Trace: dump_stack+0x78/0xa0 check_noncircular+0x165/0x180 __lock_acquire+0x1272/0x2310 lock_acquire+0x9e/0x360 ? alloc_workqueue+0x378/0x450 cpus_read_lock+0x39/0xb0 ? alloc_workqueue+0x378/0x450 alloc_workqueue+0x378/0x450 ? rcu_read_lock_sched_held+0x52/0x80 __btrfs_alloc_workqueue+0x15d/0x200 btrfs_alloc_workqueue+0x51/0x160 scrub_workers_get+0x5a/0x170 btrfs_scrub_dev+0x18c/0x630 ? start_transaction+0xd1/0x5d0 btrfs_dev_replace_by_ioctl.cold.21+0x10a/0x1d4 btrfs_ioctl+0x2799/0x30a0 ? do_sigaction+0x102/0x250 ? lockdep_hardirqs_on_prepare+0xca/0x160 ? _raw_spin_unlock_irq+0x24/0x30 ? trace_hardirqs_on+0x1c/0xe0 ? _raw_spin_unlock_irq+0x24/0x30 ? do_sigaction+0x102/0x250 ? ksys_ioctl+0x83/0xc0 ksys_ioctl+0x83/0xc0 __x64_sys_ioctl+0x16/0x20 do_syscall_64+0x50/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xa9 This happens because we're allocating the scrub workqueues under the scrub and device list mutex, which brings in a whole host of other dependencies. Because the work queue allocation is done with GFP_KERNEL, it can trigger reclaim, which can lead to a transaction commit, which in turns needs the device_list_mutex, it can lead to a deadlock. A different problem for which this fix is a solution. Fix this by moving the actual allocation outside of the scrub lock, and then only take the lock once we're ready to actually assign them to the fs_info. We'll now have to cleanup the workqueues in a few more places, so I've added a helper to do the refcount dance to safely free the workqueues. CC: stable@vger.kernel.org # 5.4+ Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2020-08-10 15:42:29 +00:00
return ret;
}
int btrfs_scrub_dev(struct btrfs_fs_info *fs_info, u64 devid, u64 start,
u64 end, struct btrfs_scrub_progress *progress,
int readonly, int is_dev_replace)
{
struct btrfs_dev_lookup_args args = { .devid = devid };
Btrfs: rename the scrub context structure The device replace procedure makes use of the scrub code. The scrub code is the most efficient code to read the allocated data of a disk, i.e. it reads sequentially in order to avoid disk head movements, it skips unallocated blocks, it uses read ahead mechanisms, and it contains all the code to detect and repair defects. This commit is a first preparation step to adapt the scrub code to be shareable for the device replace procedure. The block device will be removed from the scrub context state structure in a later step. It used to be the source block device. The scrub code as it is used for the device replace procedure reads the source data from whereever it is optimal. The source device might even be gone (disconnected, for instance due to a hardware failure). Or the drive can be so faulty so that the device replace procedure tries to avoid access to the faulty source drive as much as possible, and only if all other mirrors are damaged, as a last resort, the source disk is accessed. The modified scrub code operates as if it would handle the source drive and thereby generates an exact copy of the source disk on the target disk, even if the source disk is not present at all. Therefore the block device pointer to the source disk is removed in a later patch, and therefore the context structure is renamed (this is the goal of the current patch) to reflect that no source block device scope is there anymore. Summary: This first preparation step consists of a textual substitution of the term "dev" to the term "ctx" whereever the scrub context is used. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-02 08:58:09 +00:00
struct scrub_ctx *sctx;
int ret;
struct btrfs_device *dev;
unsigned int nofs_flag;
btrfs: scrub: try to fix super block errors [BUG] The following script shows that, although scrub can detect super block errors, it never tries to fix it: mkfs.btrfs -f -d raid1 -m raid1 $dev1 $dev2 xfs_io -c "pwrite 67108864 4k" $dev2 mount $dev1 $mnt btrfs scrub start -B $dev2 btrfs scrub start -Br $dev2 umount $mnt The first scrub reports the super error correctly: scrub done for f3289218-abd3-41ac-a630-202f766c0859 Scrub started: Tue Aug 2 14:44:11 2022 Status: finished Duration: 0:00:00 Total to scrub: 1.26GiB Rate: 0.00B/s Error summary: super=1 Corrected: 0 Uncorrectable: 0 Unverified: 0 But the second read-only scrub still reports the same super error: Scrub started: Tue Aug 2 14:44:11 2022 Status: finished Duration: 0:00:00 Total to scrub: 1.26GiB Rate: 0.00B/s Error summary: super=1 Corrected: 0 Uncorrectable: 0 Unverified: 0 [CAUSE] The comments already shows that super block can be easily fixed by committing a transaction: /* * If we find an error in a super block, we just report it. * They will get written with the next transaction commit * anyway */ But the truth is, such assumption is not always true, and since scrub should try to repair every error it found (except for read-only scrub), we should really actively commit a transaction to fix this. [FIX] Just commit a transaction if we found any super block errors, after everything else is done. We cannot do this just after scrub_supers(), as btrfs_commit_transaction() will try to pause and wait for the running scrub, thus we can not call it with scrub_lock hold. Signed-off-by: Qu Wenruo <wqu@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2022-08-02 06:53:03 +00:00
bool need_commit = false;
if (btrfs_fs_closing(fs_info))
return -EAGAIN;
/* At mount time we have ensured nodesize is in the range of [4K, 64K]. */
ASSERT(fs_info->nodesize <= BTRFS_STRIPE_LEN);
/*
* SCRUB_MAX_SECTORS_PER_BLOCK is calculated using the largest possible
* value (max nodesize / min sectorsize), thus nodesize should always
* be fine.
*/
ASSERT(fs_info->nodesize <=
SCRUB_MAX_SECTORS_PER_BLOCK << fs_info->sectorsize_bits);
/* Allocate outside of device_list_mutex */
sctx = scrub_setup_ctx(fs_info, is_dev_replace);
if (IS_ERR(sctx))
return PTR_ERR(sctx);
ret = scrub_workers_get(fs_info);
btrfs: allocate scrub workqueues outside of locks I got the following lockdep splat while testing: ====================================================== WARNING: possible circular locking dependency detected 5.8.0-rc7-00172-g021118712e59 #932 Not tainted ------------------------------------------------------ btrfs/229626 is trying to acquire lock: ffffffff828513f0 (cpu_hotplug_lock){++++}-{0:0}, at: alloc_workqueue+0x378/0x450 but task is already holding lock: ffff889dd3889518 (&fs_info->scrub_lock){+.+.}-{3:3}, at: btrfs_scrub_dev+0x11c/0x630 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #7 (&fs_info->scrub_lock){+.+.}-{3:3}: __mutex_lock+0x9f/0x930 btrfs_scrub_dev+0x11c/0x630 btrfs_dev_replace_by_ioctl.cold.21+0x10a/0x1d4 btrfs_ioctl+0x2799/0x30a0 ksys_ioctl+0x83/0xc0 __x64_sys_ioctl+0x16/0x20 do_syscall_64+0x50/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xa9 -> #6 (&fs_devs->device_list_mutex){+.+.}-{3:3}: __mutex_lock+0x9f/0x930 btrfs_run_dev_stats+0x49/0x480 commit_cowonly_roots+0xb5/0x2a0 btrfs_commit_transaction+0x516/0xa60 sync_filesystem+0x6b/0x90 generic_shutdown_super+0x22/0x100 kill_anon_super+0xe/0x30 btrfs_kill_super+0x12/0x20 deactivate_locked_super+0x29/0x60 cleanup_mnt+0xb8/0x140 task_work_run+0x6d/0xb0 __prepare_exit_to_usermode+0x1cc/0x1e0 do_syscall_64+0x5c/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xa9 -> #5 (&fs_info->tree_log_mutex){+.+.}-{3:3}: __mutex_lock+0x9f/0x930 btrfs_commit_transaction+0x4bb/0xa60 sync_filesystem+0x6b/0x90 generic_shutdown_super+0x22/0x100 kill_anon_super+0xe/0x30 btrfs_kill_super+0x12/0x20 deactivate_locked_super+0x29/0x60 cleanup_mnt+0xb8/0x140 task_work_run+0x6d/0xb0 __prepare_exit_to_usermode+0x1cc/0x1e0 do_syscall_64+0x5c/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xa9 -> #4 (&fs_info->reloc_mutex){+.+.}-{3:3}: __mutex_lock+0x9f/0x930 btrfs_record_root_in_trans+0x43/0x70 start_transaction+0xd1/0x5d0 btrfs_dirty_inode+0x42/0xd0 touch_atime+0xa1/0xd0 btrfs_file_mmap+0x3f/0x60 mmap_region+0x3a4/0x640 do_mmap+0x376/0x580 vm_mmap_pgoff+0xd5/0x120 ksys_mmap_pgoff+0x193/0x230 do_syscall_64+0x50/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xa9 -> #3 (&mm->mmap_lock#2){++++}-{3:3}: __might_fault+0x68/0x90 _copy_to_user+0x1e/0x80 perf_read+0x141/0x2c0 vfs_read+0xad/0x1b0 ksys_read+0x5f/0xe0 do_syscall_64+0x50/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xa9 -> #2 (&cpuctx_mutex){+.+.}-{3:3}: __mutex_lock+0x9f/0x930 perf_event_init_cpu+0x88/0x150 perf_event_init+0x1db/0x20b start_kernel+0x3ae/0x53c secondary_startup_64+0xa4/0xb0 -> #1 (pmus_lock){+.+.}-{3:3}: __mutex_lock+0x9f/0x930 perf_event_init_cpu+0x4f/0x150 cpuhp_invoke_callback+0xb1/0x900 _cpu_up.constprop.26+0x9f/0x130 cpu_up+0x7b/0xc0 bringup_nonboot_cpus+0x4f/0x60 smp_init+0x26/0x71 kernel_init_freeable+0x110/0x258 kernel_init+0xa/0x103 ret_from_fork+0x1f/0x30 -> #0 (cpu_hotplug_lock){++++}-{0:0}: __lock_acquire+0x1272/0x2310 lock_acquire+0x9e/0x360 cpus_read_lock+0x39/0xb0 alloc_workqueue+0x378/0x450 __btrfs_alloc_workqueue+0x15d/0x200 btrfs_alloc_workqueue+0x51/0x160 scrub_workers_get+0x5a/0x170 btrfs_scrub_dev+0x18c/0x630 btrfs_dev_replace_by_ioctl.cold.21+0x10a/0x1d4 btrfs_ioctl+0x2799/0x30a0 ksys_ioctl+0x83/0xc0 __x64_sys_ioctl+0x16/0x20 do_syscall_64+0x50/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xa9 other info that might help us debug this: Chain exists of: cpu_hotplug_lock --> &fs_devs->device_list_mutex --> &fs_info->scrub_lock Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&fs_info->scrub_lock); lock(&fs_devs->device_list_mutex); lock(&fs_info->scrub_lock); lock(cpu_hotplug_lock); *** DEADLOCK *** 2 locks held by btrfs/229626: #0: ffff88bfe8bb86e0 (&fs_devs->device_list_mutex){+.+.}-{3:3}, at: btrfs_scrub_dev+0xbd/0x630 #1: ffff889dd3889518 (&fs_info->scrub_lock){+.+.}-{3:3}, at: btrfs_scrub_dev+0x11c/0x630 stack backtrace: CPU: 15 PID: 229626 Comm: btrfs Kdump: loaded Not tainted 5.8.0-rc7-00172-g021118712e59 #932 Hardware name: Quanta Tioga Pass Single Side 01-0030993006/Tioga Pass Single Side, BIOS F08_3A18 12/20/2018 Call Trace: dump_stack+0x78/0xa0 check_noncircular+0x165/0x180 __lock_acquire+0x1272/0x2310 lock_acquire+0x9e/0x360 ? alloc_workqueue+0x378/0x450 cpus_read_lock+0x39/0xb0 ? alloc_workqueue+0x378/0x450 alloc_workqueue+0x378/0x450 ? rcu_read_lock_sched_held+0x52/0x80 __btrfs_alloc_workqueue+0x15d/0x200 btrfs_alloc_workqueue+0x51/0x160 scrub_workers_get+0x5a/0x170 btrfs_scrub_dev+0x18c/0x630 ? start_transaction+0xd1/0x5d0 btrfs_dev_replace_by_ioctl.cold.21+0x10a/0x1d4 btrfs_ioctl+0x2799/0x30a0 ? do_sigaction+0x102/0x250 ? lockdep_hardirqs_on_prepare+0xca/0x160 ? _raw_spin_unlock_irq+0x24/0x30 ? trace_hardirqs_on+0x1c/0xe0 ? _raw_spin_unlock_irq+0x24/0x30 ? do_sigaction+0x102/0x250 ? ksys_ioctl+0x83/0xc0 ksys_ioctl+0x83/0xc0 __x64_sys_ioctl+0x16/0x20 do_syscall_64+0x50/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xa9 This happens because we're allocating the scrub workqueues under the scrub and device list mutex, which brings in a whole host of other dependencies. Because the work queue allocation is done with GFP_KERNEL, it can trigger reclaim, which can lead to a transaction commit, which in turns needs the device_list_mutex, it can lead to a deadlock. A different problem for which this fix is a solution. Fix this by moving the actual allocation outside of the scrub lock, and then only take the lock once we're ready to actually assign them to the fs_info. We'll now have to cleanup the workqueues in a few more places, so I've added a helper to do the refcount dance to safely free the workqueues. CC: stable@vger.kernel.org # 5.4+ Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2020-08-10 15:42:29 +00:00
if (ret)
goto out_free_ctx;
mutex_lock(&fs_info->fs_devices->device_list_mutex);
dev = btrfs_find_device(fs_info->fs_devices, &args);
if (!dev || (test_bit(BTRFS_DEV_STATE_MISSING, &dev->dev_state) &&
!is_dev_replace)) {
mutex_unlock(&fs_info->fs_devices->device_list_mutex);
ret = -ENODEV;
btrfs: allocate scrub workqueues outside of locks I got the following lockdep splat while testing: ====================================================== WARNING: possible circular locking dependency detected 5.8.0-rc7-00172-g021118712e59 #932 Not tainted ------------------------------------------------------ btrfs/229626 is trying to acquire lock: ffffffff828513f0 (cpu_hotplug_lock){++++}-{0:0}, at: alloc_workqueue+0x378/0x450 but task is already holding lock: ffff889dd3889518 (&fs_info->scrub_lock){+.+.}-{3:3}, at: btrfs_scrub_dev+0x11c/0x630 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #7 (&fs_info->scrub_lock){+.+.}-{3:3}: __mutex_lock+0x9f/0x930 btrfs_scrub_dev+0x11c/0x630 btrfs_dev_replace_by_ioctl.cold.21+0x10a/0x1d4 btrfs_ioctl+0x2799/0x30a0 ksys_ioctl+0x83/0xc0 __x64_sys_ioctl+0x16/0x20 do_syscall_64+0x50/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xa9 -> #6 (&fs_devs->device_list_mutex){+.+.}-{3:3}: __mutex_lock+0x9f/0x930 btrfs_run_dev_stats+0x49/0x480 commit_cowonly_roots+0xb5/0x2a0 btrfs_commit_transaction+0x516/0xa60 sync_filesystem+0x6b/0x90 generic_shutdown_super+0x22/0x100 kill_anon_super+0xe/0x30 btrfs_kill_super+0x12/0x20 deactivate_locked_super+0x29/0x60 cleanup_mnt+0xb8/0x140 task_work_run+0x6d/0xb0 __prepare_exit_to_usermode+0x1cc/0x1e0 do_syscall_64+0x5c/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xa9 -> #5 (&fs_info->tree_log_mutex){+.+.}-{3:3}: __mutex_lock+0x9f/0x930 btrfs_commit_transaction+0x4bb/0xa60 sync_filesystem+0x6b/0x90 generic_shutdown_super+0x22/0x100 kill_anon_super+0xe/0x30 btrfs_kill_super+0x12/0x20 deactivate_locked_super+0x29/0x60 cleanup_mnt+0xb8/0x140 task_work_run+0x6d/0xb0 __prepare_exit_to_usermode+0x1cc/0x1e0 do_syscall_64+0x5c/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xa9 -> #4 (&fs_info->reloc_mutex){+.+.}-{3:3}: __mutex_lock+0x9f/0x930 btrfs_record_root_in_trans+0x43/0x70 start_transaction+0xd1/0x5d0 btrfs_dirty_inode+0x42/0xd0 touch_atime+0xa1/0xd0 btrfs_file_mmap+0x3f/0x60 mmap_region+0x3a4/0x640 do_mmap+0x376/0x580 vm_mmap_pgoff+0xd5/0x120 ksys_mmap_pgoff+0x193/0x230 do_syscall_64+0x50/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xa9 -> #3 (&mm->mmap_lock#2){++++}-{3:3}: __might_fault+0x68/0x90 _copy_to_user+0x1e/0x80 perf_read+0x141/0x2c0 vfs_read+0xad/0x1b0 ksys_read+0x5f/0xe0 do_syscall_64+0x50/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xa9 -> #2 (&cpuctx_mutex){+.+.}-{3:3}: __mutex_lock+0x9f/0x930 perf_event_init_cpu+0x88/0x150 perf_event_init+0x1db/0x20b start_kernel+0x3ae/0x53c secondary_startup_64+0xa4/0xb0 -> #1 (pmus_lock){+.+.}-{3:3}: __mutex_lock+0x9f/0x930 perf_event_init_cpu+0x4f/0x150 cpuhp_invoke_callback+0xb1/0x900 _cpu_up.constprop.26+0x9f/0x130 cpu_up+0x7b/0xc0 bringup_nonboot_cpus+0x4f/0x60 smp_init+0x26/0x71 kernel_init_freeable+0x110/0x258 kernel_init+0xa/0x103 ret_from_fork+0x1f/0x30 -> #0 (cpu_hotplug_lock){++++}-{0:0}: __lock_acquire+0x1272/0x2310 lock_acquire+0x9e/0x360 cpus_read_lock+0x39/0xb0 alloc_workqueue+0x378/0x450 __btrfs_alloc_workqueue+0x15d/0x200 btrfs_alloc_workqueue+0x51/0x160 scrub_workers_get+0x5a/0x170 btrfs_scrub_dev+0x18c/0x630 btrfs_dev_replace_by_ioctl.cold.21+0x10a/0x1d4 btrfs_ioctl+0x2799/0x30a0 ksys_ioctl+0x83/0xc0 __x64_sys_ioctl+0x16/0x20 do_syscall_64+0x50/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xa9 other info that might help us debug this: Chain exists of: cpu_hotplug_lock --> &fs_devs->device_list_mutex --> &fs_info->scrub_lock Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&fs_info->scrub_lock); lock(&fs_devs->device_list_mutex); lock(&fs_info->scrub_lock); lock(cpu_hotplug_lock); *** DEADLOCK *** 2 locks held by btrfs/229626: #0: ffff88bfe8bb86e0 (&fs_devs->device_list_mutex){+.+.}-{3:3}, at: btrfs_scrub_dev+0xbd/0x630 #1: ffff889dd3889518 (&fs_info->scrub_lock){+.+.}-{3:3}, at: btrfs_scrub_dev+0x11c/0x630 stack backtrace: CPU: 15 PID: 229626 Comm: btrfs Kdump: loaded Not tainted 5.8.0-rc7-00172-g021118712e59 #932 Hardware name: Quanta Tioga Pass Single Side 01-0030993006/Tioga Pass Single Side, BIOS F08_3A18 12/20/2018 Call Trace: dump_stack+0x78/0xa0 check_noncircular+0x165/0x180 __lock_acquire+0x1272/0x2310 lock_acquire+0x9e/0x360 ? alloc_workqueue+0x378/0x450 cpus_read_lock+0x39/0xb0 ? alloc_workqueue+0x378/0x450 alloc_workqueue+0x378/0x450 ? rcu_read_lock_sched_held+0x52/0x80 __btrfs_alloc_workqueue+0x15d/0x200 btrfs_alloc_workqueue+0x51/0x160 scrub_workers_get+0x5a/0x170 btrfs_scrub_dev+0x18c/0x630 ? start_transaction+0xd1/0x5d0 btrfs_dev_replace_by_ioctl.cold.21+0x10a/0x1d4 btrfs_ioctl+0x2799/0x30a0 ? do_sigaction+0x102/0x250 ? lockdep_hardirqs_on_prepare+0xca/0x160 ? _raw_spin_unlock_irq+0x24/0x30 ? trace_hardirqs_on+0x1c/0xe0 ? _raw_spin_unlock_irq+0x24/0x30 ? do_sigaction+0x102/0x250 ? ksys_ioctl+0x83/0xc0 ksys_ioctl+0x83/0xc0 __x64_sys_ioctl+0x16/0x20 do_syscall_64+0x50/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xa9 This happens because we're allocating the scrub workqueues under the scrub and device list mutex, which brings in a whole host of other dependencies. Because the work queue allocation is done with GFP_KERNEL, it can trigger reclaim, which can lead to a transaction commit, which in turns needs the device_list_mutex, it can lead to a deadlock. A different problem for which this fix is a solution. Fix this by moving the actual allocation outside of the scrub lock, and then only take the lock once we're ready to actually assign them to the fs_info. We'll now have to cleanup the workqueues in a few more places, so I've added a helper to do the refcount dance to safely free the workqueues. CC: stable@vger.kernel.org # 5.4+ Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2020-08-10 15:42:29 +00:00
goto out;
}
if (!is_dev_replace && !readonly &&
!test_bit(BTRFS_DEV_STATE_WRITEABLE, &dev->dev_state)) {
mutex_unlock(&fs_info->fs_devices->device_list_mutex);
btrfs_err_in_rcu(fs_info,
"scrub on devid %llu: filesystem on %s is not writable",
devid, btrfs_dev_name(dev));
ret = -EROFS;
btrfs: allocate scrub workqueues outside of locks I got the following lockdep splat while testing: ====================================================== WARNING: possible circular locking dependency detected 5.8.0-rc7-00172-g021118712e59 #932 Not tainted ------------------------------------------------------ btrfs/229626 is trying to acquire lock: ffffffff828513f0 (cpu_hotplug_lock){++++}-{0:0}, at: alloc_workqueue+0x378/0x450 but task is already holding lock: ffff889dd3889518 (&fs_info->scrub_lock){+.+.}-{3:3}, at: btrfs_scrub_dev+0x11c/0x630 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #7 (&fs_info->scrub_lock){+.+.}-{3:3}: __mutex_lock+0x9f/0x930 btrfs_scrub_dev+0x11c/0x630 btrfs_dev_replace_by_ioctl.cold.21+0x10a/0x1d4 btrfs_ioctl+0x2799/0x30a0 ksys_ioctl+0x83/0xc0 __x64_sys_ioctl+0x16/0x20 do_syscall_64+0x50/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xa9 -> #6 (&fs_devs->device_list_mutex){+.+.}-{3:3}: __mutex_lock+0x9f/0x930 btrfs_run_dev_stats+0x49/0x480 commit_cowonly_roots+0xb5/0x2a0 btrfs_commit_transaction+0x516/0xa60 sync_filesystem+0x6b/0x90 generic_shutdown_super+0x22/0x100 kill_anon_super+0xe/0x30 btrfs_kill_super+0x12/0x20 deactivate_locked_super+0x29/0x60 cleanup_mnt+0xb8/0x140 task_work_run+0x6d/0xb0 __prepare_exit_to_usermode+0x1cc/0x1e0 do_syscall_64+0x5c/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xa9 -> #5 (&fs_info->tree_log_mutex){+.+.}-{3:3}: __mutex_lock+0x9f/0x930 btrfs_commit_transaction+0x4bb/0xa60 sync_filesystem+0x6b/0x90 generic_shutdown_super+0x22/0x100 kill_anon_super+0xe/0x30 btrfs_kill_super+0x12/0x20 deactivate_locked_super+0x29/0x60 cleanup_mnt+0xb8/0x140 task_work_run+0x6d/0xb0 __prepare_exit_to_usermode+0x1cc/0x1e0 do_syscall_64+0x5c/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xa9 -> #4 (&fs_info->reloc_mutex){+.+.}-{3:3}: __mutex_lock+0x9f/0x930 btrfs_record_root_in_trans+0x43/0x70 start_transaction+0xd1/0x5d0 btrfs_dirty_inode+0x42/0xd0 touch_atime+0xa1/0xd0 btrfs_file_mmap+0x3f/0x60 mmap_region+0x3a4/0x640 do_mmap+0x376/0x580 vm_mmap_pgoff+0xd5/0x120 ksys_mmap_pgoff+0x193/0x230 do_syscall_64+0x50/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xa9 -> #3 (&mm->mmap_lock#2){++++}-{3:3}: __might_fault+0x68/0x90 _copy_to_user+0x1e/0x80 perf_read+0x141/0x2c0 vfs_read+0xad/0x1b0 ksys_read+0x5f/0xe0 do_syscall_64+0x50/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xa9 -> #2 (&cpuctx_mutex){+.+.}-{3:3}: __mutex_lock+0x9f/0x930 perf_event_init_cpu+0x88/0x150 perf_event_init+0x1db/0x20b start_kernel+0x3ae/0x53c secondary_startup_64+0xa4/0xb0 -> #1 (pmus_lock){+.+.}-{3:3}: __mutex_lock+0x9f/0x930 perf_event_init_cpu+0x4f/0x150 cpuhp_invoke_callback+0xb1/0x900 _cpu_up.constprop.26+0x9f/0x130 cpu_up+0x7b/0xc0 bringup_nonboot_cpus+0x4f/0x60 smp_init+0x26/0x71 kernel_init_freeable+0x110/0x258 kernel_init+0xa/0x103 ret_from_fork+0x1f/0x30 -> #0 (cpu_hotplug_lock){++++}-{0:0}: __lock_acquire+0x1272/0x2310 lock_acquire+0x9e/0x360 cpus_read_lock+0x39/0xb0 alloc_workqueue+0x378/0x450 __btrfs_alloc_workqueue+0x15d/0x200 btrfs_alloc_workqueue+0x51/0x160 scrub_workers_get+0x5a/0x170 btrfs_scrub_dev+0x18c/0x630 btrfs_dev_replace_by_ioctl.cold.21+0x10a/0x1d4 btrfs_ioctl+0x2799/0x30a0 ksys_ioctl+0x83/0xc0 __x64_sys_ioctl+0x16/0x20 do_syscall_64+0x50/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xa9 other info that might help us debug this: Chain exists of: cpu_hotplug_lock --> &fs_devs->device_list_mutex --> &fs_info->scrub_lock Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&fs_info->scrub_lock); lock(&fs_devs->device_list_mutex); lock(&fs_info->scrub_lock); lock(cpu_hotplug_lock); *** DEADLOCK *** 2 locks held by btrfs/229626: #0: ffff88bfe8bb86e0 (&fs_devs->device_list_mutex){+.+.}-{3:3}, at: btrfs_scrub_dev+0xbd/0x630 #1: ffff889dd3889518 (&fs_info->scrub_lock){+.+.}-{3:3}, at: btrfs_scrub_dev+0x11c/0x630 stack backtrace: CPU: 15 PID: 229626 Comm: btrfs Kdump: loaded Not tainted 5.8.0-rc7-00172-g021118712e59 #932 Hardware name: Quanta Tioga Pass Single Side 01-0030993006/Tioga Pass Single Side, BIOS F08_3A18 12/20/2018 Call Trace: dump_stack+0x78/0xa0 check_noncircular+0x165/0x180 __lock_acquire+0x1272/0x2310 lock_acquire+0x9e/0x360 ? alloc_workqueue+0x378/0x450 cpus_read_lock+0x39/0xb0 ? alloc_workqueue+0x378/0x450 alloc_workqueue+0x378/0x450 ? rcu_read_lock_sched_held+0x52/0x80 __btrfs_alloc_workqueue+0x15d/0x200 btrfs_alloc_workqueue+0x51/0x160 scrub_workers_get+0x5a/0x170 btrfs_scrub_dev+0x18c/0x630 ? start_transaction+0xd1/0x5d0 btrfs_dev_replace_by_ioctl.cold.21+0x10a/0x1d4 btrfs_ioctl+0x2799/0x30a0 ? do_sigaction+0x102/0x250 ? lockdep_hardirqs_on_prepare+0xca/0x160 ? _raw_spin_unlock_irq+0x24/0x30 ? trace_hardirqs_on+0x1c/0xe0 ? _raw_spin_unlock_irq+0x24/0x30 ? do_sigaction+0x102/0x250 ? ksys_ioctl+0x83/0xc0 ksys_ioctl+0x83/0xc0 __x64_sys_ioctl+0x16/0x20 do_syscall_64+0x50/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xa9 This happens because we're allocating the scrub workqueues under the scrub and device list mutex, which brings in a whole host of other dependencies. Because the work queue allocation is done with GFP_KERNEL, it can trigger reclaim, which can lead to a transaction commit, which in turns needs the device_list_mutex, it can lead to a deadlock. A different problem for which this fix is a solution. Fix this by moving the actual allocation outside of the scrub lock, and then only take the lock once we're ready to actually assign them to the fs_info. We'll now have to cleanup the workqueues in a few more places, so I've added a helper to do the refcount dance to safely free the workqueues. CC: stable@vger.kernel.org # 5.4+ Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2020-08-10 15:42:29 +00:00
goto out;
}
mutex_lock(&fs_info->scrub_lock);
if (!test_bit(BTRFS_DEV_STATE_IN_FS_METADATA, &dev->dev_state) ||
test_bit(BTRFS_DEV_STATE_REPLACE_TGT, &dev->dev_state)) {
mutex_unlock(&fs_info->scrub_lock);
mutex_unlock(&fs_info->fs_devices->device_list_mutex);
ret = -EIO;
btrfs: allocate scrub workqueues outside of locks I got the following lockdep splat while testing: ====================================================== WARNING: possible circular locking dependency detected 5.8.0-rc7-00172-g021118712e59 #932 Not tainted ------------------------------------------------------ btrfs/229626 is trying to acquire lock: ffffffff828513f0 (cpu_hotplug_lock){++++}-{0:0}, at: alloc_workqueue+0x378/0x450 but task is already holding lock: ffff889dd3889518 (&fs_info->scrub_lock){+.+.}-{3:3}, at: btrfs_scrub_dev+0x11c/0x630 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #7 (&fs_info->scrub_lock){+.+.}-{3:3}: __mutex_lock+0x9f/0x930 btrfs_scrub_dev+0x11c/0x630 btrfs_dev_replace_by_ioctl.cold.21+0x10a/0x1d4 btrfs_ioctl+0x2799/0x30a0 ksys_ioctl+0x83/0xc0 __x64_sys_ioctl+0x16/0x20 do_syscall_64+0x50/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xa9 -> #6 (&fs_devs->device_list_mutex){+.+.}-{3:3}: __mutex_lock+0x9f/0x930 btrfs_run_dev_stats+0x49/0x480 commit_cowonly_roots+0xb5/0x2a0 btrfs_commit_transaction+0x516/0xa60 sync_filesystem+0x6b/0x90 generic_shutdown_super+0x22/0x100 kill_anon_super+0xe/0x30 btrfs_kill_super+0x12/0x20 deactivate_locked_super+0x29/0x60 cleanup_mnt+0xb8/0x140 task_work_run+0x6d/0xb0 __prepare_exit_to_usermode+0x1cc/0x1e0 do_syscall_64+0x5c/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xa9 -> #5 (&fs_info->tree_log_mutex){+.+.}-{3:3}: __mutex_lock+0x9f/0x930 btrfs_commit_transaction+0x4bb/0xa60 sync_filesystem+0x6b/0x90 generic_shutdown_super+0x22/0x100 kill_anon_super+0xe/0x30 btrfs_kill_super+0x12/0x20 deactivate_locked_super+0x29/0x60 cleanup_mnt+0xb8/0x140 task_work_run+0x6d/0xb0 __prepare_exit_to_usermode+0x1cc/0x1e0 do_syscall_64+0x5c/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xa9 -> #4 (&fs_info->reloc_mutex){+.+.}-{3:3}: __mutex_lock+0x9f/0x930 btrfs_record_root_in_trans+0x43/0x70 start_transaction+0xd1/0x5d0 btrfs_dirty_inode+0x42/0xd0 touch_atime+0xa1/0xd0 btrfs_file_mmap+0x3f/0x60 mmap_region+0x3a4/0x640 do_mmap+0x376/0x580 vm_mmap_pgoff+0xd5/0x120 ksys_mmap_pgoff+0x193/0x230 do_syscall_64+0x50/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xa9 -> #3 (&mm->mmap_lock#2){++++}-{3:3}: __might_fault+0x68/0x90 _copy_to_user+0x1e/0x80 perf_read+0x141/0x2c0 vfs_read+0xad/0x1b0 ksys_read+0x5f/0xe0 do_syscall_64+0x50/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xa9 -> #2 (&cpuctx_mutex){+.+.}-{3:3}: __mutex_lock+0x9f/0x930 perf_event_init_cpu+0x88/0x150 perf_event_init+0x1db/0x20b start_kernel+0x3ae/0x53c secondary_startup_64+0xa4/0xb0 -> #1 (pmus_lock){+.+.}-{3:3}: __mutex_lock+0x9f/0x930 perf_event_init_cpu+0x4f/0x150 cpuhp_invoke_callback+0xb1/0x900 _cpu_up.constprop.26+0x9f/0x130 cpu_up+0x7b/0xc0 bringup_nonboot_cpus+0x4f/0x60 smp_init+0x26/0x71 kernel_init_freeable+0x110/0x258 kernel_init+0xa/0x103 ret_from_fork+0x1f/0x30 -> #0 (cpu_hotplug_lock){++++}-{0:0}: __lock_acquire+0x1272/0x2310 lock_acquire+0x9e/0x360 cpus_read_lock+0x39/0xb0 alloc_workqueue+0x378/0x450 __btrfs_alloc_workqueue+0x15d/0x200 btrfs_alloc_workqueue+0x51/0x160 scrub_workers_get+0x5a/0x170 btrfs_scrub_dev+0x18c/0x630 btrfs_dev_replace_by_ioctl.cold.21+0x10a/0x1d4 btrfs_ioctl+0x2799/0x30a0 ksys_ioctl+0x83/0xc0 __x64_sys_ioctl+0x16/0x20 do_syscall_64+0x50/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xa9 other info that might help us debug this: Chain exists of: cpu_hotplug_lock --> &fs_devs->device_list_mutex --> &fs_info->scrub_lock Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&fs_info->scrub_lock); lock(&fs_devs->device_list_mutex); lock(&fs_info->scrub_lock); lock(cpu_hotplug_lock); *** DEADLOCK *** 2 locks held by btrfs/229626: #0: ffff88bfe8bb86e0 (&fs_devs->device_list_mutex){+.+.}-{3:3}, at: btrfs_scrub_dev+0xbd/0x630 #1: ffff889dd3889518 (&fs_info->scrub_lock){+.+.}-{3:3}, at: btrfs_scrub_dev+0x11c/0x630 stack backtrace: CPU: 15 PID: 229626 Comm: btrfs Kdump: loaded Not tainted 5.8.0-rc7-00172-g021118712e59 #932 Hardware name: Quanta Tioga Pass Single Side 01-0030993006/Tioga Pass Single Side, BIOS F08_3A18 12/20/2018 Call Trace: dump_stack+0x78/0xa0 check_noncircular+0x165/0x180 __lock_acquire+0x1272/0x2310 lock_acquire+0x9e/0x360 ? alloc_workqueue+0x378/0x450 cpus_read_lock+0x39/0xb0 ? alloc_workqueue+0x378/0x450 alloc_workqueue+0x378/0x450 ? rcu_read_lock_sched_held+0x52/0x80 __btrfs_alloc_workqueue+0x15d/0x200 btrfs_alloc_workqueue+0x51/0x160 scrub_workers_get+0x5a/0x170 btrfs_scrub_dev+0x18c/0x630 ? start_transaction+0xd1/0x5d0 btrfs_dev_replace_by_ioctl.cold.21+0x10a/0x1d4 btrfs_ioctl+0x2799/0x30a0 ? do_sigaction+0x102/0x250 ? lockdep_hardirqs_on_prepare+0xca/0x160 ? _raw_spin_unlock_irq+0x24/0x30 ? trace_hardirqs_on+0x1c/0xe0 ? _raw_spin_unlock_irq+0x24/0x30 ? do_sigaction+0x102/0x250 ? ksys_ioctl+0x83/0xc0 ksys_ioctl+0x83/0xc0 __x64_sys_ioctl+0x16/0x20 do_syscall_64+0x50/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xa9 This happens because we're allocating the scrub workqueues under the scrub and device list mutex, which brings in a whole host of other dependencies. Because the work queue allocation is done with GFP_KERNEL, it can trigger reclaim, which can lead to a transaction commit, which in turns needs the device_list_mutex, it can lead to a deadlock. A different problem for which this fix is a solution. Fix this by moving the actual allocation outside of the scrub lock, and then only take the lock once we're ready to actually assign them to the fs_info. We'll now have to cleanup the workqueues in a few more places, so I've added a helper to do the refcount dance to safely free the workqueues. CC: stable@vger.kernel.org # 5.4+ Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2020-08-10 15:42:29 +00:00
goto out;
}
down_read(&fs_info->dev_replace.rwsem);
if (dev->scrub_ctx ||
(!is_dev_replace &&
btrfs_dev_replace_is_ongoing(&fs_info->dev_replace))) {
up_read(&fs_info->dev_replace.rwsem);
mutex_unlock(&fs_info->scrub_lock);
mutex_unlock(&fs_info->fs_devices->device_list_mutex);
ret = -EINPROGRESS;
btrfs: allocate scrub workqueues outside of locks I got the following lockdep splat while testing: ====================================================== WARNING: possible circular locking dependency detected 5.8.0-rc7-00172-g021118712e59 #932 Not tainted ------------------------------------------------------ btrfs/229626 is trying to acquire lock: ffffffff828513f0 (cpu_hotplug_lock){++++}-{0:0}, at: alloc_workqueue+0x378/0x450 but task is already holding lock: ffff889dd3889518 (&fs_info->scrub_lock){+.+.}-{3:3}, at: btrfs_scrub_dev+0x11c/0x630 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #7 (&fs_info->scrub_lock){+.+.}-{3:3}: __mutex_lock+0x9f/0x930 btrfs_scrub_dev+0x11c/0x630 btrfs_dev_replace_by_ioctl.cold.21+0x10a/0x1d4 btrfs_ioctl+0x2799/0x30a0 ksys_ioctl+0x83/0xc0 __x64_sys_ioctl+0x16/0x20 do_syscall_64+0x50/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xa9 -> #6 (&fs_devs->device_list_mutex){+.+.}-{3:3}: __mutex_lock+0x9f/0x930 btrfs_run_dev_stats+0x49/0x480 commit_cowonly_roots+0xb5/0x2a0 btrfs_commit_transaction+0x516/0xa60 sync_filesystem+0x6b/0x90 generic_shutdown_super+0x22/0x100 kill_anon_super+0xe/0x30 btrfs_kill_super+0x12/0x20 deactivate_locked_super+0x29/0x60 cleanup_mnt+0xb8/0x140 task_work_run+0x6d/0xb0 __prepare_exit_to_usermode+0x1cc/0x1e0 do_syscall_64+0x5c/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xa9 -> #5 (&fs_info->tree_log_mutex){+.+.}-{3:3}: __mutex_lock+0x9f/0x930 btrfs_commit_transaction+0x4bb/0xa60 sync_filesystem+0x6b/0x90 generic_shutdown_super+0x22/0x100 kill_anon_super+0xe/0x30 btrfs_kill_super+0x12/0x20 deactivate_locked_super+0x29/0x60 cleanup_mnt+0xb8/0x140 task_work_run+0x6d/0xb0 __prepare_exit_to_usermode+0x1cc/0x1e0 do_syscall_64+0x5c/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xa9 -> #4 (&fs_info->reloc_mutex){+.+.}-{3:3}: __mutex_lock+0x9f/0x930 btrfs_record_root_in_trans+0x43/0x70 start_transaction+0xd1/0x5d0 btrfs_dirty_inode+0x42/0xd0 touch_atime+0xa1/0xd0 btrfs_file_mmap+0x3f/0x60 mmap_region+0x3a4/0x640 do_mmap+0x376/0x580 vm_mmap_pgoff+0xd5/0x120 ksys_mmap_pgoff+0x193/0x230 do_syscall_64+0x50/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xa9 -> #3 (&mm->mmap_lock#2){++++}-{3:3}: __might_fault+0x68/0x90 _copy_to_user+0x1e/0x80 perf_read+0x141/0x2c0 vfs_read+0xad/0x1b0 ksys_read+0x5f/0xe0 do_syscall_64+0x50/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xa9 -> #2 (&cpuctx_mutex){+.+.}-{3:3}: __mutex_lock+0x9f/0x930 perf_event_init_cpu+0x88/0x150 perf_event_init+0x1db/0x20b start_kernel+0x3ae/0x53c secondary_startup_64+0xa4/0xb0 -> #1 (pmus_lock){+.+.}-{3:3}: __mutex_lock+0x9f/0x930 perf_event_init_cpu+0x4f/0x150 cpuhp_invoke_callback+0xb1/0x900 _cpu_up.constprop.26+0x9f/0x130 cpu_up+0x7b/0xc0 bringup_nonboot_cpus+0x4f/0x60 smp_init+0x26/0x71 kernel_init_freeable+0x110/0x258 kernel_init+0xa/0x103 ret_from_fork+0x1f/0x30 -> #0 (cpu_hotplug_lock){++++}-{0:0}: __lock_acquire+0x1272/0x2310 lock_acquire+0x9e/0x360 cpus_read_lock+0x39/0xb0 alloc_workqueue+0x378/0x450 __btrfs_alloc_workqueue+0x15d/0x200 btrfs_alloc_workqueue+0x51/0x160 scrub_workers_get+0x5a/0x170 btrfs_scrub_dev+0x18c/0x630 btrfs_dev_replace_by_ioctl.cold.21+0x10a/0x1d4 btrfs_ioctl+0x2799/0x30a0 ksys_ioctl+0x83/0xc0 __x64_sys_ioctl+0x16/0x20 do_syscall_64+0x50/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xa9 other info that might help us debug this: Chain exists of: cpu_hotplug_lock --> &fs_devs->device_list_mutex --> &fs_info->scrub_lock Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&fs_info->scrub_lock); lock(&fs_devs->device_list_mutex); lock(&fs_info->scrub_lock); lock(cpu_hotplug_lock); *** DEADLOCK *** 2 locks held by btrfs/229626: #0: ffff88bfe8bb86e0 (&fs_devs->device_list_mutex){+.+.}-{3:3}, at: btrfs_scrub_dev+0xbd/0x630 #1: ffff889dd3889518 (&fs_info->scrub_lock){+.+.}-{3:3}, at: btrfs_scrub_dev+0x11c/0x630 stack backtrace: CPU: 15 PID: 229626 Comm: btrfs Kdump: loaded Not tainted 5.8.0-rc7-00172-g021118712e59 #932 Hardware name: Quanta Tioga Pass Single Side 01-0030993006/Tioga Pass Single Side, BIOS F08_3A18 12/20/2018 Call Trace: dump_stack+0x78/0xa0 check_noncircular+0x165/0x180 __lock_acquire+0x1272/0x2310 lock_acquire+0x9e/0x360 ? alloc_workqueue+0x378/0x450 cpus_read_lock+0x39/0xb0 ? alloc_workqueue+0x378/0x450 alloc_workqueue+0x378/0x450 ? rcu_read_lock_sched_held+0x52/0x80 __btrfs_alloc_workqueue+0x15d/0x200 btrfs_alloc_workqueue+0x51/0x160 scrub_workers_get+0x5a/0x170 btrfs_scrub_dev+0x18c/0x630 ? start_transaction+0xd1/0x5d0 btrfs_dev_replace_by_ioctl.cold.21+0x10a/0x1d4 btrfs_ioctl+0x2799/0x30a0 ? do_sigaction+0x102/0x250 ? lockdep_hardirqs_on_prepare+0xca/0x160 ? _raw_spin_unlock_irq+0x24/0x30 ? trace_hardirqs_on+0x1c/0xe0 ? _raw_spin_unlock_irq+0x24/0x30 ? do_sigaction+0x102/0x250 ? ksys_ioctl+0x83/0xc0 ksys_ioctl+0x83/0xc0 __x64_sys_ioctl+0x16/0x20 do_syscall_64+0x50/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xa9 This happens because we're allocating the scrub workqueues under the scrub and device list mutex, which brings in a whole host of other dependencies. Because the work queue allocation is done with GFP_KERNEL, it can trigger reclaim, which can lead to a transaction commit, which in turns needs the device_list_mutex, it can lead to a deadlock. A different problem for which this fix is a solution. Fix this by moving the actual allocation outside of the scrub lock, and then only take the lock once we're ready to actually assign them to the fs_info. We'll now have to cleanup the workqueues in a few more places, so I've added a helper to do the refcount dance to safely free the workqueues. CC: stable@vger.kernel.org # 5.4+ Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2020-08-10 15:42:29 +00:00
goto out;
}
up_read(&fs_info->dev_replace.rwsem);
Btrfs: rename the scrub context structure The device replace procedure makes use of the scrub code. The scrub code is the most efficient code to read the allocated data of a disk, i.e. it reads sequentially in order to avoid disk head movements, it skips unallocated blocks, it uses read ahead mechanisms, and it contains all the code to detect and repair defects. This commit is a first preparation step to adapt the scrub code to be shareable for the device replace procedure. The block device will be removed from the scrub context state structure in a later step. It used to be the source block device. The scrub code as it is used for the device replace procedure reads the source data from whereever it is optimal. The source device might even be gone (disconnected, for instance due to a hardware failure). Or the drive can be so faulty so that the device replace procedure tries to avoid access to the faulty source drive as much as possible, and only if all other mirrors are damaged, as a last resort, the source disk is accessed. The modified scrub code operates as if it would handle the source drive and thereby generates an exact copy of the source disk on the target disk, even if the source disk is not present at all. Therefore the block device pointer to the source disk is removed in a later patch, and therefore the context structure is renamed (this is the goal of the current patch) to reflect that no source block device scope is there anymore. Summary: This first preparation step consists of a textual substitution of the term "dev" to the term "ctx" whereever the scrub context is used. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-02 08:58:09 +00:00
sctx->readonly = readonly;
dev->scrub_ctx = sctx;
mutex_unlock(&fs_info->fs_devices->device_list_mutex);
/*
* checking @scrub_pause_req here, we can avoid
* race between committing transaction and scrubbing.
*/
__scrub_blocked_if_needed(fs_info);
atomic_inc(&fs_info->scrubs_running);
mutex_unlock(&fs_info->scrub_lock);
/*
* In order to avoid deadlock with reclaim when there is a transaction
* trying to pause scrub, make sure we use GFP_NOFS for all the
* allocations done at btrfs_scrub_sectors() and scrub_sectors_for_parity()
* invoked by our callees. The pausing request is done when the
* transaction commit starts, and it blocks the transaction until scrub
* is paused (done at specific points at scrub_stripe() or right above
* before incrementing fs_info->scrubs_running).
*/
nofs_flag = memalloc_nofs_save();
if (!is_dev_replace) {
btrfs: scrub: try to fix super block errors [BUG] The following script shows that, although scrub can detect super block errors, it never tries to fix it: mkfs.btrfs -f -d raid1 -m raid1 $dev1 $dev2 xfs_io -c "pwrite 67108864 4k" $dev2 mount $dev1 $mnt btrfs scrub start -B $dev2 btrfs scrub start -Br $dev2 umount $mnt The first scrub reports the super error correctly: scrub done for f3289218-abd3-41ac-a630-202f766c0859 Scrub started: Tue Aug 2 14:44:11 2022 Status: finished Duration: 0:00:00 Total to scrub: 1.26GiB Rate: 0.00B/s Error summary: super=1 Corrected: 0 Uncorrectable: 0 Unverified: 0 But the second read-only scrub still reports the same super error: Scrub started: Tue Aug 2 14:44:11 2022 Status: finished Duration: 0:00:00 Total to scrub: 1.26GiB Rate: 0.00B/s Error summary: super=1 Corrected: 0 Uncorrectable: 0 Unverified: 0 [CAUSE] The comments already shows that super block can be easily fixed by committing a transaction: /* * If we find an error in a super block, we just report it. * They will get written with the next transaction commit * anyway */ But the truth is, such assumption is not always true, and since scrub should try to repair every error it found (except for read-only scrub), we should really actively commit a transaction to fix this. [FIX] Just commit a transaction if we found any super block errors, after everything else is done. We cannot do this just after scrub_supers(), as btrfs_commit_transaction() will try to pause and wait for the running scrub, thus we can not call it with scrub_lock hold. Signed-off-by: Qu Wenruo <wqu@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2022-08-02 06:53:03 +00:00
u64 old_super_errors;
spin_lock(&sctx->stat_lock);
old_super_errors = sctx->stat.super_errors;
spin_unlock(&sctx->stat_lock);
btrfs_info(fs_info, "scrub: started on devid %llu", devid);
/*
* by holding device list mutex, we can
* kick off writing super in log tree sync.
*/
mutex_lock(&fs_info->fs_devices->device_list_mutex);
ret = scrub_supers(sctx, dev);
mutex_unlock(&fs_info->fs_devices->device_list_mutex);
btrfs: scrub: try to fix super block errors [BUG] The following script shows that, although scrub can detect super block errors, it never tries to fix it: mkfs.btrfs -f -d raid1 -m raid1 $dev1 $dev2 xfs_io -c "pwrite 67108864 4k" $dev2 mount $dev1 $mnt btrfs scrub start -B $dev2 btrfs scrub start -Br $dev2 umount $mnt The first scrub reports the super error correctly: scrub done for f3289218-abd3-41ac-a630-202f766c0859 Scrub started: Tue Aug 2 14:44:11 2022 Status: finished Duration: 0:00:00 Total to scrub: 1.26GiB Rate: 0.00B/s Error summary: super=1 Corrected: 0 Uncorrectable: 0 Unverified: 0 But the second read-only scrub still reports the same super error: Scrub started: Tue Aug 2 14:44:11 2022 Status: finished Duration: 0:00:00 Total to scrub: 1.26GiB Rate: 0.00B/s Error summary: super=1 Corrected: 0 Uncorrectable: 0 Unverified: 0 [CAUSE] The comments already shows that super block can be easily fixed by committing a transaction: /* * If we find an error in a super block, we just report it. * They will get written with the next transaction commit * anyway */ But the truth is, such assumption is not always true, and since scrub should try to repair every error it found (except for read-only scrub), we should really actively commit a transaction to fix this. [FIX] Just commit a transaction if we found any super block errors, after everything else is done. We cannot do this just after scrub_supers(), as btrfs_commit_transaction() will try to pause and wait for the running scrub, thus we can not call it with scrub_lock hold. Signed-off-by: Qu Wenruo <wqu@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2022-08-02 06:53:03 +00:00
spin_lock(&sctx->stat_lock);
/*
* Super block errors found, but we can not commit transaction
* at current context, since btrfs_commit_transaction() needs
* to pause the current running scrub (hold by ourselves).
*/
if (sctx->stat.super_errors > old_super_errors && !sctx->readonly)
need_commit = true;
spin_unlock(&sctx->stat_lock);
}
if (!ret)
ret = scrub_enumerate_chunks(sctx, dev, start, end);
memalloc_nofs_restore(nofs_flag);
atomic_dec(&fs_info->scrubs_running);
wake_up(&fs_info->scrub_pause_wait);
if (progress)
Btrfs: rename the scrub context structure The device replace procedure makes use of the scrub code. The scrub code is the most efficient code to read the allocated data of a disk, i.e. it reads sequentially in order to avoid disk head movements, it skips unallocated blocks, it uses read ahead mechanisms, and it contains all the code to detect and repair defects. This commit is a first preparation step to adapt the scrub code to be shareable for the device replace procedure. The block device will be removed from the scrub context state structure in a later step. It used to be the source block device. The scrub code as it is used for the device replace procedure reads the source data from whereever it is optimal. The source device might even be gone (disconnected, for instance due to a hardware failure). Or the drive can be so faulty so that the device replace procedure tries to avoid access to the faulty source drive as much as possible, and only if all other mirrors are damaged, as a last resort, the source disk is accessed. The modified scrub code operates as if it would handle the source drive and thereby generates an exact copy of the source disk on the target disk, even if the source disk is not present at all. Therefore the block device pointer to the source disk is removed in a later patch, and therefore the context structure is renamed (this is the goal of the current patch) to reflect that no source block device scope is there anymore. Summary: This first preparation step consists of a textual substitution of the term "dev" to the term "ctx" whereever the scrub context is used. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-02 08:58:09 +00:00
memcpy(progress, &sctx->stat, sizeof(*progress));
if (!is_dev_replace)
btrfs_info(fs_info, "scrub: %s on devid %llu with status: %d",
ret ? "not finished" : "finished", devid, ret);
mutex_lock(&fs_info->scrub_lock);
dev->scrub_ctx = NULL;
mutex_unlock(&fs_info->scrub_lock);
btrfs: allocate scrub workqueues outside of locks I got the following lockdep splat while testing: ====================================================== WARNING: possible circular locking dependency detected 5.8.0-rc7-00172-g021118712e59 #932 Not tainted ------------------------------------------------------ btrfs/229626 is trying to acquire lock: ffffffff828513f0 (cpu_hotplug_lock){++++}-{0:0}, at: alloc_workqueue+0x378/0x450 but task is already holding lock: ffff889dd3889518 (&fs_info->scrub_lock){+.+.}-{3:3}, at: btrfs_scrub_dev+0x11c/0x630 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #7 (&fs_info->scrub_lock){+.+.}-{3:3}: __mutex_lock+0x9f/0x930 btrfs_scrub_dev+0x11c/0x630 btrfs_dev_replace_by_ioctl.cold.21+0x10a/0x1d4 btrfs_ioctl+0x2799/0x30a0 ksys_ioctl+0x83/0xc0 __x64_sys_ioctl+0x16/0x20 do_syscall_64+0x50/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xa9 -> #6 (&fs_devs->device_list_mutex){+.+.}-{3:3}: __mutex_lock+0x9f/0x930 btrfs_run_dev_stats+0x49/0x480 commit_cowonly_roots+0xb5/0x2a0 btrfs_commit_transaction+0x516/0xa60 sync_filesystem+0x6b/0x90 generic_shutdown_super+0x22/0x100 kill_anon_super+0xe/0x30 btrfs_kill_super+0x12/0x20 deactivate_locked_super+0x29/0x60 cleanup_mnt+0xb8/0x140 task_work_run+0x6d/0xb0 __prepare_exit_to_usermode+0x1cc/0x1e0 do_syscall_64+0x5c/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xa9 -> #5 (&fs_info->tree_log_mutex){+.+.}-{3:3}: __mutex_lock+0x9f/0x930 btrfs_commit_transaction+0x4bb/0xa60 sync_filesystem+0x6b/0x90 generic_shutdown_super+0x22/0x100 kill_anon_super+0xe/0x30 btrfs_kill_super+0x12/0x20 deactivate_locked_super+0x29/0x60 cleanup_mnt+0xb8/0x140 task_work_run+0x6d/0xb0 __prepare_exit_to_usermode+0x1cc/0x1e0 do_syscall_64+0x5c/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xa9 -> #4 (&fs_info->reloc_mutex){+.+.}-{3:3}: __mutex_lock+0x9f/0x930 btrfs_record_root_in_trans+0x43/0x70 start_transaction+0xd1/0x5d0 btrfs_dirty_inode+0x42/0xd0 touch_atime+0xa1/0xd0 btrfs_file_mmap+0x3f/0x60 mmap_region+0x3a4/0x640 do_mmap+0x376/0x580 vm_mmap_pgoff+0xd5/0x120 ksys_mmap_pgoff+0x193/0x230 do_syscall_64+0x50/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xa9 -> #3 (&mm->mmap_lock#2){++++}-{3:3}: __might_fault+0x68/0x90 _copy_to_user+0x1e/0x80 perf_read+0x141/0x2c0 vfs_read+0xad/0x1b0 ksys_read+0x5f/0xe0 do_syscall_64+0x50/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xa9 -> #2 (&cpuctx_mutex){+.+.}-{3:3}: __mutex_lock+0x9f/0x930 perf_event_init_cpu+0x88/0x150 perf_event_init+0x1db/0x20b start_kernel+0x3ae/0x53c secondary_startup_64+0xa4/0xb0 -> #1 (pmus_lock){+.+.}-{3:3}: __mutex_lock+0x9f/0x930 perf_event_init_cpu+0x4f/0x150 cpuhp_invoke_callback+0xb1/0x900 _cpu_up.constprop.26+0x9f/0x130 cpu_up+0x7b/0xc0 bringup_nonboot_cpus+0x4f/0x60 smp_init+0x26/0x71 kernel_init_freeable+0x110/0x258 kernel_init+0xa/0x103 ret_from_fork+0x1f/0x30 -> #0 (cpu_hotplug_lock){++++}-{0:0}: __lock_acquire+0x1272/0x2310 lock_acquire+0x9e/0x360 cpus_read_lock+0x39/0xb0 alloc_workqueue+0x378/0x450 __btrfs_alloc_workqueue+0x15d/0x200 btrfs_alloc_workqueue+0x51/0x160 scrub_workers_get+0x5a/0x170 btrfs_scrub_dev+0x18c/0x630 btrfs_dev_replace_by_ioctl.cold.21+0x10a/0x1d4 btrfs_ioctl+0x2799/0x30a0 ksys_ioctl+0x83/0xc0 __x64_sys_ioctl+0x16/0x20 do_syscall_64+0x50/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xa9 other info that might help us debug this: Chain exists of: cpu_hotplug_lock --> &fs_devs->device_list_mutex --> &fs_info->scrub_lock Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&fs_info->scrub_lock); lock(&fs_devs->device_list_mutex); lock(&fs_info->scrub_lock); lock(cpu_hotplug_lock); *** DEADLOCK *** 2 locks held by btrfs/229626: #0: ffff88bfe8bb86e0 (&fs_devs->device_list_mutex){+.+.}-{3:3}, at: btrfs_scrub_dev+0xbd/0x630 #1: ffff889dd3889518 (&fs_info->scrub_lock){+.+.}-{3:3}, at: btrfs_scrub_dev+0x11c/0x630 stack backtrace: CPU: 15 PID: 229626 Comm: btrfs Kdump: loaded Not tainted 5.8.0-rc7-00172-g021118712e59 #932 Hardware name: Quanta Tioga Pass Single Side 01-0030993006/Tioga Pass Single Side, BIOS F08_3A18 12/20/2018 Call Trace: dump_stack+0x78/0xa0 check_noncircular+0x165/0x180 __lock_acquire+0x1272/0x2310 lock_acquire+0x9e/0x360 ? alloc_workqueue+0x378/0x450 cpus_read_lock+0x39/0xb0 ? alloc_workqueue+0x378/0x450 alloc_workqueue+0x378/0x450 ? rcu_read_lock_sched_held+0x52/0x80 __btrfs_alloc_workqueue+0x15d/0x200 btrfs_alloc_workqueue+0x51/0x160 scrub_workers_get+0x5a/0x170 btrfs_scrub_dev+0x18c/0x630 ? start_transaction+0xd1/0x5d0 btrfs_dev_replace_by_ioctl.cold.21+0x10a/0x1d4 btrfs_ioctl+0x2799/0x30a0 ? do_sigaction+0x102/0x250 ? lockdep_hardirqs_on_prepare+0xca/0x160 ? _raw_spin_unlock_irq+0x24/0x30 ? trace_hardirqs_on+0x1c/0xe0 ? _raw_spin_unlock_irq+0x24/0x30 ? do_sigaction+0x102/0x250 ? ksys_ioctl+0x83/0xc0 ksys_ioctl+0x83/0xc0 __x64_sys_ioctl+0x16/0x20 do_syscall_64+0x50/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xa9 This happens because we're allocating the scrub workqueues under the scrub and device list mutex, which brings in a whole host of other dependencies. Because the work queue allocation is done with GFP_KERNEL, it can trigger reclaim, which can lead to a transaction commit, which in turns needs the device_list_mutex, it can lead to a deadlock. A different problem for which this fix is a solution. Fix this by moving the actual allocation outside of the scrub lock, and then only take the lock once we're ready to actually assign them to the fs_info. We'll now have to cleanup the workqueues in a few more places, so I've added a helper to do the refcount dance to safely free the workqueues. CC: stable@vger.kernel.org # 5.4+ Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2020-08-10 15:42:29 +00:00
scrub_workers_put(fs_info);
Btrfs: scrub, fix sleep in atomic context My previous patch "Btrfs: fix scrub race leading to use-after-free" introduced the possibility to sleep in an atomic context, which happens when the scrub_lock mutex is held at the time scrub_pending_bio_dec() is called - this function can be called under an atomic context. Chris ran into this in a debug kernel which gave the following trace: [ 1928.950319] BUG: sleeping function called from invalid context at kernel/locking/mutex.c:621 [ 1928.967334] in_atomic(): 1, irqs_disabled(): 0, pid: 149670, name: fsstress [ 1928.981324] INFO: lockdep is turned off. [ 1928.989244] CPU: 24 PID: 149670 Comm: fsstress Tainted: G W 3.19.0-rc7-mason+ #41 [ 1929.006418] Hardware name: ZTSYSTEMS Echo Ridge T4 /A9DRPF-10D, BIOS 1.07 05/10/2012 [ 1929.022207] ffffffff81a22cf8 ffff881076e03b78 ffffffff816b8dd9 ffff881076e03b78 [ 1929.037267] ffff880d8e828710 ffff881076e03ba8 ffffffff810856c4 ffff881076e03bc8 [ 1929.052315] 0000000000000000 000000000000026d ffffffff81a22cf8 ffff881076e03bd8 [ 1929.067381] Call Trace: [ 1929.072344] <IRQ> [<ffffffff816b8dd9>] dump_stack+0x4f/0x6e [ 1929.083968] [<ffffffff810856c4>] ___might_sleep+0x174/0x230 [ 1929.095352] [<ffffffff810857d2>] __might_sleep+0x52/0x90 [ 1929.106223] [<ffffffff816bb68f>] mutex_lock_nested+0x2f/0x3b0 [ 1929.117951] [<ffffffff810ab37d>] ? trace_hardirqs_on+0xd/0x10 [ 1929.129708] [<ffffffffa05dc838>] scrub_pending_bio_dec+0x38/0x70 [btrfs] [ 1929.143370] [<ffffffffa05dd0e0>] scrub_parity_bio_endio+0x50/0x70 [btrfs] [ 1929.157191] [<ffffffff812fa603>] bio_endio+0x53/0xa0 [ 1929.167382] [<ffffffffa05f96bc>] rbio_orig_end_io+0x7c/0xa0 [btrfs] [ 1929.180161] [<ffffffffa05f97ba>] raid_write_parity_end_io+0x5a/0x80 [btrfs] [ 1929.194318] [<ffffffff812fa603>] bio_endio+0x53/0xa0 [ 1929.204496] [<ffffffff8130401b>] blk_update_request+0x1eb/0x450 [ 1929.216569] [<ffffffff81096e58>] ? trigger_load_balance+0x78/0x500 [ 1929.229176] [<ffffffff8144c74d>] scsi_end_request+0x3d/0x1f0 [ 1929.240740] [<ffffffff8144ccac>] scsi_io_completion+0xac/0x5b0 [ 1929.252654] [<ffffffff81441c50>] scsi_finish_command+0xf0/0x150 [ 1929.264725] [<ffffffff8144d317>] scsi_softirq_done+0x147/0x170 [ 1929.276635] [<ffffffff8130ace6>] blk_done_softirq+0x86/0xa0 [ 1929.288014] [<ffffffff8105d92e>] __do_softirq+0xde/0x600 [ 1929.298885] [<ffffffff8105df6d>] irq_exit+0xbd/0xd0 (...) Fix this by using a reference count on the scrub context structure instead of locking the scrub_lock mutex. Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Chris Mason <clm@fb.com>
2015-02-09 21:14:24 +00:00
scrub_put_ctx(sctx);
btrfs: scrub: try to fix super block errors [BUG] The following script shows that, although scrub can detect super block errors, it never tries to fix it: mkfs.btrfs -f -d raid1 -m raid1 $dev1 $dev2 xfs_io -c "pwrite 67108864 4k" $dev2 mount $dev1 $mnt btrfs scrub start -B $dev2 btrfs scrub start -Br $dev2 umount $mnt The first scrub reports the super error correctly: scrub done for f3289218-abd3-41ac-a630-202f766c0859 Scrub started: Tue Aug 2 14:44:11 2022 Status: finished Duration: 0:00:00 Total to scrub: 1.26GiB Rate: 0.00B/s Error summary: super=1 Corrected: 0 Uncorrectable: 0 Unverified: 0 But the second read-only scrub still reports the same super error: Scrub started: Tue Aug 2 14:44:11 2022 Status: finished Duration: 0:00:00 Total to scrub: 1.26GiB Rate: 0.00B/s Error summary: super=1 Corrected: 0 Uncorrectable: 0 Unverified: 0 [CAUSE] The comments already shows that super block can be easily fixed by committing a transaction: /* * If we find an error in a super block, we just report it. * They will get written with the next transaction commit * anyway */ But the truth is, such assumption is not always true, and since scrub should try to repair every error it found (except for read-only scrub), we should really actively commit a transaction to fix this. [FIX] Just commit a transaction if we found any super block errors, after everything else is done. We cannot do this just after scrub_supers(), as btrfs_commit_transaction() will try to pause and wait for the running scrub, thus we can not call it with scrub_lock hold. Signed-off-by: Qu Wenruo <wqu@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2022-08-02 06:53:03 +00:00
/*
* We found some super block errors before, now try to force a
* transaction commit, as scrub has finished.
*/
if (need_commit) {
struct btrfs_trans_handle *trans;
trans = btrfs_start_transaction(fs_info->tree_root, 0);
if (IS_ERR(trans)) {
ret = PTR_ERR(trans);
btrfs_err(fs_info,
"scrub: failed to start transaction to fix super block errors: %d", ret);
return ret;
}
ret = btrfs_commit_transaction(trans);
if (ret < 0)
btrfs_err(fs_info,
"scrub: failed to commit transaction to fix super block errors: %d", ret);
}
return ret;
btrfs: allocate scrub workqueues outside of locks I got the following lockdep splat while testing: ====================================================== WARNING: possible circular locking dependency detected 5.8.0-rc7-00172-g021118712e59 #932 Not tainted ------------------------------------------------------ btrfs/229626 is trying to acquire lock: ffffffff828513f0 (cpu_hotplug_lock){++++}-{0:0}, at: alloc_workqueue+0x378/0x450 but task is already holding lock: ffff889dd3889518 (&fs_info->scrub_lock){+.+.}-{3:3}, at: btrfs_scrub_dev+0x11c/0x630 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #7 (&fs_info->scrub_lock){+.+.}-{3:3}: __mutex_lock+0x9f/0x930 btrfs_scrub_dev+0x11c/0x630 btrfs_dev_replace_by_ioctl.cold.21+0x10a/0x1d4 btrfs_ioctl+0x2799/0x30a0 ksys_ioctl+0x83/0xc0 __x64_sys_ioctl+0x16/0x20 do_syscall_64+0x50/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xa9 -> #6 (&fs_devs->device_list_mutex){+.+.}-{3:3}: __mutex_lock+0x9f/0x930 btrfs_run_dev_stats+0x49/0x480 commit_cowonly_roots+0xb5/0x2a0 btrfs_commit_transaction+0x516/0xa60 sync_filesystem+0x6b/0x90 generic_shutdown_super+0x22/0x100 kill_anon_super+0xe/0x30 btrfs_kill_super+0x12/0x20 deactivate_locked_super+0x29/0x60 cleanup_mnt+0xb8/0x140 task_work_run+0x6d/0xb0 __prepare_exit_to_usermode+0x1cc/0x1e0 do_syscall_64+0x5c/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xa9 -> #5 (&fs_info->tree_log_mutex){+.+.}-{3:3}: __mutex_lock+0x9f/0x930 btrfs_commit_transaction+0x4bb/0xa60 sync_filesystem+0x6b/0x90 generic_shutdown_super+0x22/0x100 kill_anon_super+0xe/0x30 btrfs_kill_super+0x12/0x20 deactivate_locked_super+0x29/0x60 cleanup_mnt+0xb8/0x140 task_work_run+0x6d/0xb0 __prepare_exit_to_usermode+0x1cc/0x1e0 do_syscall_64+0x5c/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xa9 -> #4 (&fs_info->reloc_mutex){+.+.}-{3:3}: __mutex_lock+0x9f/0x930 btrfs_record_root_in_trans+0x43/0x70 start_transaction+0xd1/0x5d0 btrfs_dirty_inode+0x42/0xd0 touch_atime+0xa1/0xd0 btrfs_file_mmap+0x3f/0x60 mmap_region+0x3a4/0x640 do_mmap+0x376/0x580 vm_mmap_pgoff+0xd5/0x120 ksys_mmap_pgoff+0x193/0x230 do_syscall_64+0x50/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xa9 -> #3 (&mm->mmap_lock#2){++++}-{3:3}: __might_fault+0x68/0x90 _copy_to_user+0x1e/0x80 perf_read+0x141/0x2c0 vfs_read+0xad/0x1b0 ksys_read+0x5f/0xe0 do_syscall_64+0x50/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xa9 -> #2 (&cpuctx_mutex){+.+.}-{3:3}: __mutex_lock+0x9f/0x930 perf_event_init_cpu+0x88/0x150 perf_event_init+0x1db/0x20b start_kernel+0x3ae/0x53c secondary_startup_64+0xa4/0xb0 -> #1 (pmus_lock){+.+.}-{3:3}: __mutex_lock+0x9f/0x930 perf_event_init_cpu+0x4f/0x150 cpuhp_invoke_callback+0xb1/0x900 _cpu_up.constprop.26+0x9f/0x130 cpu_up+0x7b/0xc0 bringup_nonboot_cpus+0x4f/0x60 smp_init+0x26/0x71 kernel_init_freeable+0x110/0x258 kernel_init+0xa/0x103 ret_from_fork+0x1f/0x30 -> #0 (cpu_hotplug_lock){++++}-{0:0}: __lock_acquire+0x1272/0x2310 lock_acquire+0x9e/0x360 cpus_read_lock+0x39/0xb0 alloc_workqueue+0x378/0x450 __btrfs_alloc_workqueue+0x15d/0x200 btrfs_alloc_workqueue+0x51/0x160 scrub_workers_get+0x5a/0x170 btrfs_scrub_dev+0x18c/0x630 btrfs_dev_replace_by_ioctl.cold.21+0x10a/0x1d4 btrfs_ioctl+0x2799/0x30a0 ksys_ioctl+0x83/0xc0 __x64_sys_ioctl+0x16/0x20 do_syscall_64+0x50/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xa9 other info that might help us debug this: Chain exists of: cpu_hotplug_lock --> &fs_devs->device_list_mutex --> &fs_info->scrub_lock Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&fs_info->scrub_lock); lock(&fs_devs->device_list_mutex); lock(&fs_info->scrub_lock); lock(cpu_hotplug_lock); *** DEADLOCK *** 2 locks held by btrfs/229626: #0: ffff88bfe8bb86e0 (&fs_devs->device_list_mutex){+.+.}-{3:3}, at: btrfs_scrub_dev+0xbd/0x630 #1: ffff889dd3889518 (&fs_info->scrub_lock){+.+.}-{3:3}, at: btrfs_scrub_dev+0x11c/0x630 stack backtrace: CPU: 15 PID: 229626 Comm: btrfs Kdump: loaded Not tainted 5.8.0-rc7-00172-g021118712e59 #932 Hardware name: Quanta Tioga Pass Single Side 01-0030993006/Tioga Pass Single Side, BIOS F08_3A18 12/20/2018 Call Trace: dump_stack+0x78/0xa0 check_noncircular+0x165/0x180 __lock_acquire+0x1272/0x2310 lock_acquire+0x9e/0x360 ? alloc_workqueue+0x378/0x450 cpus_read_lock+0x39/0xb0 ? alloc_workqueue+0x378/0x450 alloc_workqueue+0x378/0x450 ? rcu_read_lock_sched_held+0x52/0x80 __btrfs_alloc_workqueue+0x15d/0x200 btrfs_alloc_workqueue+0x51/0x160 scrub_workers_get+0x5a/0x170 btrfs_scrub_dev+0x18c/0x630 ? start_transaction+0xd1/0x5d0 btrfs_dev_replace_by_ioctl.cold.21+0x10a/0x1d4 btrfs_ioctl+0x2799/0x30a0 ? do_sigaction+0x102/0x250 ? lockdep_hardirqs_on_prepare+0xca/0x160 ? _raw_spin_unlock_irq+0x24/0x30 ? trace_hardirqs_on+0x1c/0xe0 ? _raw_spin_unlock_irq+0x24/0x30 ? do_sigaction+0x102/0x250 ? ksys_ioctl+0x83/0xc0 ksys_ioctl+0x83/0xc0 __x64_sys_ioctl+0x16/0x20 do_syscall_64+0x50/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xa9 This happens because we're allocating the scrub workqueues under the scrub and device list mutex, which brings in a whole host of other dependencies. Because the work queue allocation is done with GFP_KERNEL, it can trigger reclaim, which can lead to a transaction commit, which in turns needs the device_list_mutex, it can lead to a deadlock. A different problem for which this fix is a solution. Fix this by moving the actual allocation outside of the scrub lock, and then only take the lock once we're ready to actually assign them to the fs_info. We'll now have to cleanup the workqueues in a few more places, so I've added a helper to do the refcount dance to safely free the workqueues. CC: stable@vger.kernel.org # 5.4+ Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2020-08-10 15:42:29 +00:00
out:
scrub_workers_put(fs_info);
out_free_ctx:
scrub_free_ctx(sctx);
return ret;
}
void btrfs_scrub_pause(struct btrfs_fs_info *fs_info)
{
mutex_lock(&fs_info->scrub_lock);
atomic_inc(&fs_info->scrub_pause_req);
while (atomic_read(&fs_info->scrubs_paused) !=
atomic_read(&fs_info->scrubs_running)) {
mutex_unlock(&fs_info->scrub_lock);
wait_event(fs_info->scrub_pause_wait,
atomic_read(&fs_info->scrubs_paused) ==
atomic_read(&fs_info->scrubs_running));
mutex_lock(&fs_info->scrub_lock);
}
mutex_unlock(&fs_info->scrub_lock);
}
void btrfs_scrub_continue(struct btrfs_fs_info *fs_info)
{
atomic_dec(&fs_info->scrub_pause_req);
wake_up(&fs_info->scrub_pause_wait);
}
int btrfs_scrub_cancel(struct btrfs_fs_info *fs_info)
{
mutex_lock(&fs_info->scrub_lock);
if (!atomic_read(&fs_info->scrubs_running)) {
mutex_unlock(&fs_info->scrub_lock);
return -ENOTCONN;
}
atomic_inc(&fs_info->scrub_cancel_req);
while (atomic_read(&fs_info->scrubs_running)) {
mutex_unlock(&fs_info->scrub_lock);
wait_event(fs_info->scrub_pause_wait,
atomic_read(&fs_info->scrubs_running) == 0);
mutex_lock(&fs_info->scrub_lock);
}
atomic_dec(&fs_info->scrub_cancel_req);
mutex_unlock(&fs_info->scrub_lock);
return 0;
}
int btrfs_scrub_cancel_dev(struct btrfs_device *dev)
{
struct btrfs_fs_info *fs_info = dev->fs_info;
Btrfs: rename the scrub context structure The device replace procedure makes use of the scrub code. The scrub code is the most efficient code to read the allocated data of a disk, i.e. it reads sequentially in order to avoid disk head movements, it skips unallocated blocks, it uses read ahead mechanisms, and it contains all the code to detect and repair defects. This commit is a first preparation step to adapt the scrub code to be shareable for the device replace procedure. The block device will be removed from the scrub context state structure in a later step. It used to be the source block device. The scrub code as it is used for the device replace procedure reads the source data from whereever it is optimal. The source device might even be gone (disconnected, for instance due to a hardware failure). Or the drive can be so faulty so that the device replace procedure tries to avoid access to the faulty source drive as much as possible, and only if all other mirrors are damaged, as a last resort, the source disk is accessed. The modified scrub code operates as if it would handle the source drive and thereby generates an exact copy of the source disk on the target disk, even if the source disk is not present at all. Therefore the block device pointer to the source disk is removed in a later patch, and therefore the context structure is renamed (this is the goal of the current patch) to reflect that no source block device scope is there anymore. Summary: This first preparation step consists of a textual substitution of the term "dev" to the term "ctx" whereever the scrub context is used. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-02 08:58:09 +00:00
struct scrub_ctx *sctx;
mutex_lock(&fs_info->scrub_lock);
sctx = dev->scrub_ctx;
Btrfs: rename the scrub context structure The device replace procedure makes use of the scrub code. The scrub code is the most efficient code to read the allocated data of a disk, i.e. it reads sequentially in order to avoid disk head movements, it skips unallocated blocks, it uses read ahead mechanisms, and it contains all the code to detect and repair defects. This commit is a first preparation step to adapt the scrub code to be shareable for the device replace procedure. The block device will be removed from the scrub context state structure in a later step. It used to be the source block device. The scrub code as it is used for the device replace procedure reads the source data from whereever it is optimal. The source device might even be gone (disconnected, for instance due to a hardware failure). Or the drive can be so faulty so that the device replace procedure tries to avoid access to the faulty source drive as much as possible, and only if all other mirrors are damaged, as a last resort, the source disk is accessed. The modified scrub code operates as if it would handle the source drive and thereby generates an exact copy of the source disk on the target disk, even if the source disk is not present at all. Therefore the block device pointer to the source disk is removed in a later patch, and therefore the context structure is renamed (this is the goal of the current patch) to reflect that no source block device scope is there anymore. Summary: This first preparation step consists of a textual substitution of the term "dev" to the term "ctx" whereever the scrub context is used. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-02 08:58:09 +00:00
if (!sctx) {
mutex_unlock(&fs_info->scrub_lock);
return -ENOTCONN;
}
Btrfs: rename the scrub context structure The device replace procedure makes use of the scrub code. The scrub code is the most efficient code to read the allocated data of a disk, i.e. it reads sequentially in order to avoid disk head movements, it skips unallocated blocks, it uses read ahead mechanisms, and it contains all the code to detect and repair defects. This commit is a first preparation step to adapt the scrub code to be shareable for the device replace procedure. The block device will be removed from the scrub context state structure in a later step. It used to be the source block device. The scrub code as it is used for the device replace procedure reads the source data from whereever it is optimal. The source device might even be gone (disconnected, for instance due to a hardware failure). Or the drive can be so faulty so that the device replace procedure tries to avoid access to the faulty source drive as much as possible, and only if all other mirrors are damaged, as a last resort, the source disk is accessed. The modified scrub code operates as if it would handle the source drive and thereby generates an exact copy of the source disk on the target disk, even if the source disk is not present at all. Therefore the block device pointer to the source disk is removed in a later patch, and therefore the context structure is renamed (this is the goal of the current patch) to reflect that no source block device scope is there anymore. Summary: This first preparation step consists of a textual substitution of the term "dev" to the term "ctx" whereever the scrub context is used. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-02 08:58:09 +00:00
atomic_inc(&sctx->cancel_req);
while (dev->scrub_ctx) {
mutex_unlock(&fs_info->scrub_lock);
wait_event(fs_info->scrub_pause_wait,
dev->scrub_ctx == NULL);
mutex_lock(&fs_info->scrub_lock);
}
mutex_unlock(&fs_info->scrub_lock);
return 0;
}
int btrfs_scrub_progress(struct btrfs_fs_info *fs_info, u64 devid,
struct btrfs_scrub_progress *progress)
{
struct btrfs_dev_lookup_args args = { .devid = devid };
struct btrfs_device *dev;
Btrfs: rename the scrub context structure The device replace procedure makes use of the scrub code. The scrub code is the most efficient code to read the allocated data of a disk, i.e. it reads sequentially in order to avoid disk head movements, it skips unallocated blocks, it uses read ahead mechanisms, and it contains all the code to detect and repair defects. This commit is a first preparation step to adapt the scrub code to be shareable for the device replace procedure. The block device will be removed from the scrub context state structure in a later step. It used to be the source block device. The scrub code as it is used for the device replace procedure reads the source data from whereever it is optimal. The source device might even be gone (disconnected, for instance due to a hardware failure). Or the drive can be so faulty so that the device replace procedure tries to avoid access to the faulty source drive as much as possible, and only if all other mirrors are damaged, as a last resort, the source disk is accessed. The modified scrub code operates as if it would handle the source drive and thereby generates an exact copy of the source disk on the target disk, even if the source disk is not present at all. Therefore the block device pointer to the source disk is removed in a later patch, and therefore the context structure is renamed (this is the goal of the current patch) to reflect that no source block device scope is there anymore. Summary: This first preparation step consists of a textual substitution of the term "dev" to the term "ctx" whereever the scrub context is used. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-02 08:58:09 +00:00
struct scrub_ctx *sctx = NULL;
mutex_lock(&fs_info->fs_devices->device_list_mutex);
dev = btrfs_find_device(fs_info->fs_devices, &args);
if (dev)
sctx = dev->scrub_ctx;
Btrfs: rename the scrub context structure The device replace procedure makes use of the scrub code. The scrub code is the most efficient code to read the allocated data of a disk, i.e. it reads sequentially in order to avoid disk head movements, it skips unallocated blocks, it uses read ahead mechanisms, and it contains all the code to detect and repair defects. This commit is a first preparation step to adapt the scrub code to be shareable for the device replace procedure. The block device will be removed from the scrub context state structure in a later step. It used to be the source block device. The scrub code as it is used for the device replace procedure reads the source data from whereever it is optimal. The source device might even be gone (disconnected, for instance due to a hardware failure). Or the drive can be so faulty so that the device replace procedure tries to avoid access to the faulty source drive as much as possible, and only if all other mirrors are damaged, as a last resort, the source disk is accessed. The modified scrub code operates as if it would handle the source drive and thereby generates an exact copy of the source disk on the target disk, even if the source disk is not present at all. Therefore the block device pointer to the source disk is removed in a later patch, and therefore the context structure is renamed (this is the goal of the current patch) to reflect that no source block device scope is there anymore. Summary: This first preparation step consists of a textual substitution of the term "dev" to the term "ctx" whereever the scrub context is used. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-02 08:58:09 +00:00
if (sctx)
memcpy(progress, &sctx->stat, sizeof(*progress));
mutex_unlock(&fs_info->fs_devices->device_list_mutex);
Btrfs: rename the scrub context structure The device replace procedure makes use of the scrub code. The scrub code is the most efficient code to read the allocated data of a disk, i.e. it reads sequentially in order to avoid disk head movements, it skips unallocated blocks, it uses read ahead mechanisms, and it contains all the code to detect and repair defects. This commit is a first preparation step to adapt the scrub code to be shareable for the device replace procedure. The block device will be removed from the scrub context state structure in a later step. It used to be the source block device. The scrub code as it is used for the device replace procedure reads the source data from whereever it is optimal. The source device might even be gone (disconnected, for instance due to a hardware failure). Or the drive can be so faulty so that the device replace procedure tries to avoid access to the faulty source drive as much as possible, and only if all other mirrors are damaged, as a last resort, the source disk is accessed. The modified scrub code operates as if it would handle the source drive and thereby generates an exact copy of the source disk on the target disk, even if the source disk is not present at all. Therefore the block device pointer to the source disk is removed in a later patch, and therefore the context structure is renamed (this is the goal of the current patch) to reflect that no source block device scope is there anymore. Summary: This first preparation step consists of a textual substitution of the term "dev" to the term "ctx" whereever the scrub context is used. Signed-off-by: Stefan Behrens <sbehrens@giantdisaster.de> Signed-off-by: Chris Mason <chris.mason@fusionio.com>
2012-11-02 08:58:09 +00:00
return dev ? (sctx ? 0 : -ENOTCONN) : -ENODEV;
}