linux/drivers/scsi/aic94xx/aic94xx_sds.c

1463 lines
36 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0-only
[SCSI] aic94xx: new driver This is the end point of the separate aic94xx driver based on the original driver and transport class from Luben Tuikov <ltuikov@yahoo.com> The log of the separate development is: Alexis Bruemmer: o aic94xx: fix hotplug/unplug for expanderless systems o aic94xx: disable split completion timer/setting by default o aic94xx: wide port off expander support o aic94xx: remove various inline functions o aic94xx: use bitops o aic94xx: remove queue comment o aic94xx: remove sas_common.c o aic94xx: sas remove depot's o aic94xx: use available list_for_each_entry_safe_reverse() o aic94xx: sas header file merge James Bottomley: o aic94xx: fix TF_TMF_NO_CTX processing o aic94xx: convert to request_firmware interface o aic94xx: fix hotplug/unplug o aic94xx: add link error counts to the expander phys o aic94xx: add transport class phy reset capability o aic94xx: remove local_attached flag o Remove README o Fixup Makefile variable for libsas rename o Rename sas->libsas o aic94xx: correct return code for sas_discover_event o aic94xx: use parent backlink port o aic94xx: remove channel abstraction o aic94xx: fix routing algorithms o aic94xx: add backlink port o aic94xx: fix cascaded expander properties o aic94xx: fix sleep under lock o aic94xx: fix panic on module removal in complex topology o aic94xx: make use of the new sas_port o rename sas_port to asd_sas_port o Fix for eh_strategy_handler move o aic94xx: move entirely over to correct transport class formulation o remove last vestages of sas_rphy_alloc() o update for eh_timed_out move o Preliminary expander support for aic94xx o sas: remove event thread o minor warning cleanups o remove last vestiges of id mapping arrays o Further updates o Convert aic94xx over entirely to the transport class end device and o update aic94xx/sas to use the new sas transport class end device o [PATCH] aic94xx: attaching to the sas transport class o Add missing completion removal from prior patch o [PATCH] aic94xx: attaching to the sas transport class o Build fixes from akpm Jeff Garzik: o [scsi aic94xx] Remove ->owner from PCI info table Luben Tuikov: o initial aic94xx driver Mike Anderson: o aic94xx: fix panic on module insertion o aic94xx: stub out SATA_DEV case o aic94xx: compile warning cleanups o aic94xx: sas_alloc_task o aic94xx: ref count update o aic94xx nexus loss time value o [PATCH] aic94xx: driver assertion in non-x86 BIOS env Randy Dunlap: o libsas: externs not needed Robert Tarte: o aic94xx: sequence patch - fixes SATA support Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-08-29 14:22:51 +00:00
/*
* Aic94xx SAS/SATA driver access to shared data structures and memory
* maps.
*
* Copyright (C) 2005 Adaptec, Inc. All rights reserved.
* Copyright (C) 2005 Luben Tuikov <luben_tuikov@adaptec.com>
*/
#include <linux/pci.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 08:04:11 +00:00
#include <linux/slab.h>
[SCSI] aic94xx: new driver This is the end point of the separate aic94xx driver based on the original driver and transport class from Luben Tuikov <ltuikov@yahoo.com> The log of the separate development is: Alexis Bruemmer: o aic94xx: fix hotplug/unplug for expanderless systems o aic94xx: disable split completion timer/setting by default o aic94xx: wide port off expander support o aic94xx: remove various inline functions o aic94xx: use bitops o aic94xx: remove queue comment o aic94xx: remove sas_common.c o aic94xx: sas remove depot's o aic94xx: use available list_for_each_entry_safe_reverse() o aic94xx: sas header file merge James Bottomley: o aic94xx: fix TF_TMF_NO_CTX processing o aic94xx: convert to request_firmware interface o aic94xx: fix hotplug/unplug o aic94xx: add link error counts to the expander phys o aic94xx: add transport class phy reset capability o aic94xx: remove local_attached flag o Remove README o Fixup Makefile variable for libsas rename o Rename sas->libsas o aic94xx: correct return code for sas_discover_event o aic94xx: use parent backlink port o aic94xx: remove channel abstraction o aic94xx: fix routing algorithms o aic94xx: add backlink port o aic94xx: fix cascaded expander properties o aic94xx: fix sleep under lock o aic94xx: fix panic on module removal in complex topology o aic94xx: make use of the new sas_port o rename sas_port to asd_sas_port o Fix for eh_strategy_handler move o aic94xx: move entirely over to correct transport class formulation o remove last vestages of sas_rphy_alloc() o update for eh_timed_out move o Preliminary expander support for aic94xx o sas: remove event thread o minor warning cleanups o remove last vestiges of id mapping arrays o Further updates o Convert aic94xx over entirely to the transport class end device and o update aic94xx/sas to use the new sas transport class end device o [PATCH] aic94xx: attaching to the sas transport class o Add missing completion removal from prior patch o [PATCH] aic94xx: attaching to the sas transport class o Build fixes from akpm Jeff Garzik: o [scsi aic94xx] Remove ->owner from PCI info table Luben Tuikov: o initial aic94xx driver Mike Anderson: o aic94xx: fix panic on module insertion o aic94xx: stub out SATA_DEV case o aic94xx: compile warning cleanups o aic94xx: sas_alloc_task o aic94xx: ref count update o aic94xx nexus loss time value o [PATCH] aic94xx: driver assertion in non-x86 BIOS env Randy Dunlap: o libsas: externs not needed Robert Tarte: o aic94xx: sequence patch - fixes SATA support Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-08-29 14:22:51 +00:00
#include <linux/delay.h>
#include "aic94xx.h"
#include "aic94xx_reg.h"
#include "aic94xx_sds.h"
[SCSI] aic94xx: new driver This is the end point of the separate aic94xx driver based on the original driver and transport class from Luben Tuikov <ltuikov@yahoo.com> The log of the separate development is: Alexis Bruemmer: o aic94xx: fix hotplug/unplug for expanderless systems o aic94xx: disable split completion timer/setting by default o aic94xx: wide port off expander support o aic94xx: remove various inline functions o aic94xx: use bitops o aic94xx: remove queue comment o aic94xx: remove sas_common.c o aic94xx: sas remove depot's o aic94xx: use available list_for_each_entry_safe_reverse() o aic94xx: sas header file merge James Bottomley: o aic94xx: fix TF_TMF_NO_CTX processing o aic94xx: convert to request_firmware interface o aic94xx: fix hotplug/unplug o aic94xx: add link error counts to the expander phys o aic94xx: add transport class phy reset capability o aic94xx: remove local_attached flag o Remove README o Fixup Makefile variable for libsas rename o Rename sas->libsas o aic94xx: correct return code for sas_discover_event o aic94xx: use parent backlink port o aic94xx: remove channel abstraction o aic94xx: fix routing algorithms o aic94xx: add backlink port o aic94xx: fix cascaded expander properties o aic94xx: fix sleep under lock o aic94xx: fix panic on module removal in complex topology o aic94xx: make use of the new sas_port o rename sas_port to asd_sas_port o Fix for eh_strategy_handler move o aic94xx: move entirely over to correct transport class formulation o remove last vestages of sas_rphy_alloc() o update for eh_timed_out move o Preliminary expander support for aic94xx o sas: remove event thread o minor warning cleanups o remove last vestiges of id mapping arrays o Further updates o Convert aic94xx over entirely to the transport class end device and o update aic94xx/sas to use the new sas transport class end device o [PATCH] aic94xx: attaching to the sas transport class o Add missing completion removal from prior patch o [PATCH] aic94xx: attaching to the sas transport class o Build fixes from akpm Jeff Garzik: o [scsi aic94xx] Remove ->owner from PCI info table Luben Tuikov: o initial aic94xx driver Mike Anderson: o aic94xx: fix panic on module insertion o aic94xx: stub out SATA_DEV case o aic94xx: compile warning cleanups o aic94xx: sas_alloc_task o aic94xx: ref count update o aic94xx nexus loss time value o [PATCH] aic94xx: driver assertion in non-x86 BIOS env Randy Dunlap: o libsas: externs not needed Robert Tarte: o aic94xx: sequence patch - fixes SATA support Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-08-29 14:22:51 +00:00
/* ---------- OCM stuff ---------- */
struct asd_ocm_dir_ent {
u8 type;
u8 offs[3];
u8 _r1;
u8 size[3];
} __attribute__ ((packed));
struct asd_ocm_dir {
char sig[2];
u8 _r1[2];
u8 major; /* 0 */
u8 minor; /* 0 */
u8 _r2;
u8 num_de;
struct asd_ocm_dir_ent entry[15];
} __attribute__ ((packed));
#define OCM_DE_OCM_DIR 0x00
#define OCM_DE_WIN_DRVR 0x01
#define OCM_DE_BIOS_CHIM 0x02
#define OCM_DE_RAID_ENGN 0x03
#define OCM_DE_BIOS_INTL 0x04
#define OCM_DE_BIOS_CHIM_OSM 0x05
#define OCM_DE_BIOS_CHIM_DYNAMIC 0x06
#define OCM_DE_ADDC2C_RES0 0x07
#define OCM_DE_ADDC2C_RES1 0x08
#define OCM_DE_ADDC2C_RES2 0x09
#define OCM_DE_ADDC2C_RES3 0x0A
#define OCM_INIT_DIR_ENTRIES 5
/***************************************************************************
* OCM directory default
[SCSI] aic94xx: new driver This is the end point of the separate aic94xx driver based on the original driver and transport class from Luben Tuikov <ltuikov@yahoo.com> The log of the separate development is: Alexis Bruemmer: o aic94xx: fix hotplug/unplug for expanderless systems o aic94xx: disable split completion timer/setting by default o aic94xx: wide port off expander support o aic94xx: remove various inline functions o aic94xx: use bitops o aic94xx: remove queue comment o aic94xx: remove sas_common.c o aic94xx: sas remove depot's o aic94xx: use available list_for_each_entry_safe_reverse() o aic94xx: sas header file merge James Bottomley: o aic94xx: fix TF_TMF_NO_CTX processing o aic94xx: convert to request_firmware interface o aic94xx: fix hotplug/unplug o aic94xx: add link error counts to the expander phys o aic94xx: add transport class phy reset capability o aic94xx: remove local_attached flag o Remove README o Fixup Makefile variable for libsas rename o Rename sas->libsas o aic94xx: correct return code for sas_discover_event o aic94xx: use parent backlink port o aic94xx: remove channel abstraction o aic94xx: fix routing algorithms o aic94xx: add backlink port o aic94xx: fix cascaded expander properties o aic94xx: fix sleep under lock o aic94xx: fix panic on module removal in complex topology o aic94xx: make use of the new sas_port o rename sas_port to asd_sas_port o Fix for eh_strategy_handler move o aic94xx: move entirely over to correct transport class formulation o remove last vestages of sas_rphy_alloc() o update for eh_timed_out move o Preliminary expander support for aic94xx o sas: remove event thread o minor warning cleanups o remove last vestiges of id mapping arrays o Further updates o Convert aic94xx over entirely to the transport class end device and o update aic94xx/sas to use the new sas transport class end device o [PATCH] aic94xx: attaching to the sas transport class o Add missing completion removal from prior patch o [PATCH] aic94xx: attaching to the sas transport class o Build fixes from akpm Jeff Garzik: o [scsi aic94xx] Remove ->owner from PCI info table Luben Tuikov: o initial aic94xx driver Mike Anderson: o aic94xx: fix panic on module insertion o aic94xx: stub out SATA_DEV case o aic94xx: compile warning cleanups o aic94xx: sas_alloc_task o aic94xx: ref count update o aic94xx nexus loss time value o [PATCH] aic94xx: driver assertion in non-x86 BIOS env Randy Dunlap: o libsas: externs not needed Robert Tarte: o aic94xx: sequence patch - fixes SATA support Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-08-29 14:22:51 +00:00
***************************************************************************/
static struct asd_ocm_dir OCMDirInit =
{
.sig = {0x4D, 0x4F}, /* signature */
.num_de = OCM_INIT_DIR_ENTRIES, /* no. of directory entries */
};
/***************************************************************************
* OCM directory Entries default
[SCSI] aic94xx: new driver This is the end point of the separate aic94xx driver based on the original driver and transport class from Luben Tuikov <ltuikov@yahoo.com> The log of the separate development is: Alexis Bruemmer: o aic94xx: fix hotplug/unplug for expanderless systems o aic94xx: disable split completion timer/setting by default o aic94xx: wide port off expander support o aic94xx: remove various inline functions o aic94xx: use bitops o aic94xx: remove queue comment o aic94xx: remove sas_common.c o aic94xx: sas remove depot's o aic94xx: use available list_for_each_entry_safe_reverse() o aic94xx: sas header file merge James Bottomley: o aic94xx: fix TF_TMF_NO_CTX processing o aic94xx: convert to request_firmware interface o aic94xx: fix hotplug/unplug o aic94xx: add link error counts to the expander phys o aic94xx: add transport class phy reset capability o aic94xx: remove local_attached flag o Remove README o Fixup Makefile variable for libsas rename o Rename sas->libsas o aic94xx: correct return code for sas_discover_event o aic94xx: use parent backlink port o aic94xx: remove channel abstraction o aic94xx: fix routing algorithms o aic94xx: add backlink port o aic94xx: fix cascaded expander properties o aic94xx: fix sleep under lock o aic94xx: fix panic on module removal in complex topology o aic94xx: make use of the new sas_port o rename sas_port to asd_sas_port o Fix for eh_strategy_handler move o aic94xx: move entirely over to correct transport class formulation o remove last vestages of sas_rphy_alloc() o update for eh_timed_out move o Preliminary expander support for aic94xx o sas: remove event thread o minor warning cleanups o remove last vestiges of id mapping arrays o Further updates o Convert aic94xx over entirely to the transport class end device and o update aic94xx/sas to use the new sas transport class end device o [PATCH] aic94xx: attaching to the sas transport class o Add missing completion removal from prior patch o [PATCH] aic94xx: attaching to the sas transport class o Build fixes from akpm Jeff Garzik: o [scsi aic94xx] Remove ->owner from PCI info table Luben Tuikov: o initial aic94xx driver Mike Anderson: o aic94xx: fix panic on module insertion o aic94xx: stub out SATA_DEV case o aic94xx: compile warning cleanups o aic94xx: sas_alloc_task o aic94xx: ref count update o aic94xx nexus loss time value o [PATCH] aic94xx: driver assertion in non-x86 BIOS env Randy Dunlap: o libsas: externs not needed Robert Tarte: o aic94xx: sequence patch - fixes SATA support Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-08-29 14:22:51 +00:00
***************************************************************************/
static struct asd_ocm_dir_ent OCMDirEntriesInit[OCM_INIT_DIR_ENTRIES] =
{
{
.type = (OCM_DE_ADDC2C_RES0), /* Entry type */
.offs = {128}, /* Offset */
.size = {0, 4}, /* size */
},
{
.type = (OCM_DE_ADDC2C_RES1), /* Entry type */
.offs = {128, 4}, /* Offset */
.size = {0, 4}, /* size */
},
{
.type = (OCM_DE_ADDC2C_RES2), /* Entry type */
.offs = {128, 8}, /* Offset */
.size = {0, 4}, /* size */
},
{
.type = (OCM_DE_ADDC2C_RES3), /* Entry type */
.offs = {128, 12}, /* Offset */
.size = {0, 4}, /* size */
},
{
.type = (OCM_DE_WIN_DRVR), /* Entry type */
.offs = {128, 16}, /* Offset */
.size = {128, 235, 1}, /* size */
},
};
struct asd_bios_chim_struct {
char sig[4];
u8 major; /* 1 */
u8 minor; /* 0 */
u8 bios_major;
u8 bios_minor;
__le32 bios_build;
u8 flags;
u8 pci_slot;
__le16 ue_num;
__le16 ue_size;
u8 _r[14];
/* The unit element array is right here.
*/
} __attribute__ ((packed));
/**
* asd_read_ocm_seg - read an on chip memory (OCM) segment
* @asd_ha: pointer to the host adapter structure
* @buffer: where to write the read data
* @offs: offset into OCM where to read from
* @size: how many bytes to read
*
* Return the number of bytes not read. Return 0 on success.
*/
static int asd_read_ocm_seg(struct asd_ha_struct *asd_ha, void *buffer,
u32 offs, int size)
{
u8 *p = buffer;
if (unlikely(asd_ha->iospace))
asd_read_reg_string(asd_ha, buffer, offs+OCM_BASE_ADDR, size);
else {
for ( ; size > 0; size--, offs++, p++)
*p = asd_read_ocm_byte(asd_ha, offs);
}
return size;
}
static int asd_read_ocm_dir(struct asd_ha_struct *asd_ha,
struct asd_ocm_dir *dir, u32 offs)
{
int err = asd_read_ocm_seg(asd_ha, dir, offs, sizeof(*dir));
if (err) {
ASD_DPRINTK("couldn't read ocm segment\n");
return err;
}
if (dir->sig[0] != 'M' || dir->sig[1] != 'O') {
ASD_DPRINTK("no valid dir signature(%c%c) at start of OCM\n",
dir->sig[0], dir->sig[1]);
return -ENOENT;
}
if (dir->major != 0) {
asd_printk("unsupported major version of ocm dir:0x%x\n",
dir->major);
return -ENOENT;
}
dir->num_de &= 0xf;
return 0;
}
/**
* asd_write_ocm_seg - write an on chip memory (OCM) segment
* @asd_ha: pointer to the host adapter structure
* @buffer: where to read the write data
* @offs: offset into OCM to write to
* @size: how many bytes to write
*
* Return the number of bytes not written. Return 0 on success.
*/
static void asd_write_ocm_seg(struct asd_ha_struct *asd_ha, void *buffer,
u32 offs, int size)
{
u8 *p = buffer;
if (unlikely(asd_ha->iospace))
asd_write_reg_string(asd_ha, buffer, offs+OCM_BASE_ADDR, size);
else {
for ( ; size > 0; size--, offs++, p++)
asd_write_ocm_byte(asd_ha, offs, *p);
}
return;
}
#define THREE_TO_NUM(X) ((X)[0] | ((X)[1] << 8) | ((X)[2] << 16))
static int asd_find_dir_entry(struct asd_ocm_dir *dir, u8 type,
u32 *offs, u32 *size)
{
int i;
struct asd_ocm_dir_ent *ent;
for (i = 0; i < dir->num_de; i++) {
if (dir->entry[i].type == type)
break;
}
if (i >= dir->num_de)
return -ENOENT;
ent = &dir->entry[i];
*offs = (u32) THREE_TO_NUM(ent->offs);
*size = (u32) THREE_TO_NUM(ent->size);
return 0;
}
#define OCM_BIOS_CHIM_DE 2
#define BC_BIOS_PRESENT 1
static int asd_get_bios_chim(struct asd_ha_struct *asd_ha,
struct asd_ocm_dir *dir)
{
int err;
struct asd_bios_chim_struct *bc_struct;
u32 offs, size;
err = asd_find_dir_entry(dir, OCM_BIOS_CHIM_DE, &offs, &size);
if (err) {
ASD_DPRINTK("couldn't find BIOS_CHIM dir ent\n");
goto out;
}
err = -ENOMEM;
bc_struct = kmalloc(sizeof(*bc_struct), GFP_KERNEL);
if (!bc_struct) {
asd_printk("no memory for bios_chim struct\n");
goto out;
}
err = asd_read_ocm_seg(asd_ha, (void *)bc_struct, offs,
sizeof(*bc_struct));
if (err) {
ASD_DPRINTK("couldn't read ocm segment\n");
goto out2;
}
if (strncmp(bc_struct->sig, "SOIB", 4)
&& strncmp(bc_struct->sig, "IPSA", 4)) {
ASD_DPRINTK("BIOS_CHIM entry has no valid sig(%c%c%c%c)\n",
bc_struct->sig[0], bc_struct->sig[1],
bc_struct->sig[2], bc_struct->sig[3]);
err = -ENOENT;
goto out2;
}
if (bc_struct->major != 1) {
asd_printk("BIOS_CHIM unsupported major version:0x%x\n",
bc_struct->major);
err = -ENOENT;
goto out2;
}
if (bc_struct->flags & BC_BIOS_PRESENT) {
asd_ha->hw_prof.bios.present = 1;
asd_ha->hw_prof.bios.maj = bc_struct->bios_major;
asd_ha->hw_prof.bios.min = bc_struct->bios_minor;
asd_ha->hw_prof.bios.bld = le32_to_cpu(bc_struct->bios_build);
ASD_DPRINTK("BIOS present (%d,%d), %d\n",
asd_ha->hw_prof.bios.maj,
asd_ha->hw_prof.bios.min,
asd_ha->hw_prof.bios.bld);
}
asd_ha->hw_prof.ue.num = le16_to_cpu(bc_struct->ue_num);
asd_ha->hw_prof.ue.size= le16_to_cpu(bc_struct->ue_size);
ASD_DPRINTK("ue num:%d, ue size:%d\n", asd_ha->hw_prof.ue.num,
asd_ha->hw_prof.ue.size);
size = asd_ha->hw_prof.ue.num * asd_ha->hw_prof.ue.size;
if (size > 0) {
err = -ENOMEM;
asd_ha->hw_prof.ue.area = kmalloc(size, GFP_KERNEL);
if (!asd_ha->hw_prof.ue.area)
goto out2;
err = asd_read_ocm_seg(asd_ha, (void *)asd_ha->hw_prof.ue.area,
offs + sizeof(*bc_struct), size);
if (err) {
kfree(asd_ha->hw_prof.ue.area);
asd_ha->hw_prof.ue.area = NULL;
asd_ha->hw_prof.ue.num = 0;
asd_ha->hw_prof.ue.size = 0;
ASD_DPRINTK("couldn't read ue entries(%d)\n", err);
}
}
out2:
kfree(bc_struct);
out:
return err;
}
static void
asd_hwi_initialize_ocm_dir (struct asd_ha_struct *asd_ha)
{
int i;
/* Zero OCM */
for (i = 0; i < OCM_MAX_SIZE; i += 4)
asd_write_ocm_dword(asd_ha, i, 0);
/* Write Dir */
asd_write_ocm_seg(asd_ha, &OCMDirInit, 0,
sizeof(struct asd_ocm_dir));
/* Write Dir Entries */
for (i = 0; i < OCM_INIT_DIR_ENTRIES; i++)
asd_write_ocm_seg(asd_ha, &OCMDirEntriesInit[i],
sizeof(struct asd_ocm_dir) +
(i * sizeof(struct asd_ocm_dir_ent))
, sizeof(struct asd_ocm_dir_ent));
}
static int
asd_hwi_check_ocm_access (struct asd_ha_struct *asd_ha)
{
struct pci_dev *pcidev = asd_ha->pcidev;
u32 reg;
int err = 0;
u32 v;
/* check if OCM has been initialized by BIOS */
reg = asd_read_reg_dword(asd_ha, EXSICNFGR);
if (!(reg & OCMINITIALIZED)) {
err = pci_read_config_dword(pcidev, PCIC_INTRPT_STAT, &v);
if (err) {
asd_printk("couldn't access PCIC_INTRPT_STAT of %s\n",
pci_name(pcidev));
goto out;
}
printk(KERN_INFO "OCM is not initialized by BIOS,"
"reinitialize it and ignore it, current IntrptStatus"
"is 0x%x\n", v);
if (v)
err = pci_write_config_dword(pcidev,
PCIC_INTRPT_STAT, v);
if (err) {
asd_printk("couldn't write PCIC_INTRPT_STAT of %s\n",
pci_name(pcidev));
goto out;
}
asd_hwi_initialize_ocm_dir(asd_ha);
}
out:
return err;
}
/**
* asd_read_ocm - read on chip memory (OCM)
* @asd_ha: pointer to the host adapter structure
*/
int asd_read_ocm(struct asd_ha_struct *asd_ha)
{
int err;
struct asd_ocm_dir *dir;
if (asd_hwi_check_ocm_access(asd_ha))
return -1;
dir = kmalloc(sizeof(*dir), GFP_KERNEL);
if (!dir) {
asd_printk("no memory for ocm dir\n");
return -ENOMEM;
}
err = asd_read_ocm_dir(asd_ha, dir, 0);
if (err)
goto out;
err = asd_get_bios_chim(asd_ha, dir);
out:
kfree(dir);
return err;
}
/* ---------- FLASH stuff ---------- */
#define FLASH_RESET 0xF0
#define ASD_FLASH_SIZE 0x200000
[SCSI] aic94xx: new driver This is the end point of the separate aic94xx driver based on the original driver and transport class from Luben Tuikov <ltuikov@yahoo.com> The log of the separate development is: Alexis Bruemmer: o aic94xx: fix hotplug/unplug for expanderless systems o aic94xx: disable split completion timer/setting by default o aic94xx: wide port off expander support o aic94xx: remove various inline functions o aic94xx: use bitops o aic94xx: remove queue comment o aic94xx: remove sas_common.c o aic94xx: sas remove depot's o aic94xx: use available list_for_each_entry_safe_reverse() o aic94xx: sas header file merge James Bottomley: o aic94xx: fix TF_TMF_NO_CTX processing o aic94xx: convert to request_firmware interface o aic94xx: fix hotplug/unplug o aic94xx: add link error counts to the expander phys o aic94xx: add transport class phy reset capability o aic94xx: remove local_attached flag o Remove README o Fixup Makefile variable for libsas rename o Rename sas->libsas o aic94xx: correct return code for sas_discover_event o aic94xx: use parent backlink port o aic94xx: remove channel abstraction o aic94xx: fix routing algorithms o aic94xx: add backlink port o aic94xx: fix cascaded expander properties o aic94xx: fix sleep under lock o aic94xx: fix panic on module removal in complex topology o aic94xx: make use of the new sas_port o rename sas_port to asd_sas_port o Fix for eh_strategy_handler move o aic94xx: move entirely over to correct transport class formulation o remove last vestages of sas_rphy_alloc() o update for eh_timed_out move o Preliminary expander support for aic94xx o sas: remove event thread o minor warning cleanups o remove last vestiges of id mapping arrays o Further updates o Convert aic94xx over entirely to the transport class end device and o update aic94xx/sas to use the new sas transport class end device o [PATCH] aic94xx: attaching to the sas transport class o Add missing completion removal from prior patch o [PATCH] aic94xx: attaching to the sas transport class o Build fixes from akpm Jeff Garzik: o [scsi aic94xx] Remove ->owner from PCI info table Luben Tuikov: o initial aic94xx driver Mike Anderson: o aic94xx: fix panic on module insertion o aic94xx: stub out SATA_DEV case o aic94xx: compile warning cleanups o aic94xx: sas_alloc_task o aic94xx: ref count update o aic94xx nexus loss time value o [PATCH] aic94xx: driver assertion in non-x86 BIOS env Randy Dunlap: o libsas: externs not needed Robert Tarte: o aic94xx: sequence patch - fixes SATA support Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-08-29 14:22:51 +00:00
#define FLASH_DIR_COOKIE "*** ADAPTEC FLASH DIRECTORY *** "
#define FLASH_NEXT_ENTRY_OFFS 0x2000
#define FLASH_MAX_DIR_ENTRIES 32
#define FLASH_DE_TYPE_MASK 0x3FFFFFFF
#define FLASH_DE_MS 0x120
#define FLASH_DE_CTRL_A_USER 0xE0
struct asd_flash_de {
__le32 type;
__le32 offs;
__le32 pad_size;
__le32 image_size;
__le32 chksum;
u8 _r[12];
u8 version[32];
} __attribute__ ((packed));
struct asd_flash_dir {
u8 cookie[32];
__le32 rev; /* 2 */
__le32 chksum;
__le32 chksum_antidote;
__le32 bld;
u8 bld_id[32]; /* build id data */
u8 ver_data[32]; /* date and time of build */
__le32 ae_mask;
__le32 v_mask;
__le32 oc_mask;
u8 _r[20];
struct asd_flash_de dir_entry[FLASH_MAX_DIR_ENTRIES];
} __attribute__ ((packed));
struct asd_manuf_sec {
char sig[2]; /* 'S', 'M' */
u16 offs_next;
u8 maj; /* 0 */
u8 min; /* 0 */
u16 chksum;
u16 size;
u8 _r[6];
u8 sas_addr[SAS_ADDR_SIZE];
u8 pcba_sn[ASD_PCBA_SN_SIZE];
/* Here start the other segments */
scsi: libsas: Replace zero-length array with flexible-array The current codebase makes use of the zero-length array language extension to the C90 standard, but the preferred mechanism to declare variable-length types such as these ones is a flexible array member[1][2], introduced in C99: struct foo { int stuff; struct boo array[]; }; By making use of the mechanism above, we will get a compiler warning in case the flexible array does not occur last in the structure, which will help us prevent some kind of undefined behavior bugs from being inadvertently introduced[3] to the codebase from now on. Also, notice that, dynamic memory allocations won't be affected by this change: "Flexible array members have incomplete type, and so the sizeof operator may not be applied. As a quirk of the original implementation of zero-length arrays, sizeof evaluates to zero."[1] sizeof(flexible-array-member) triggers a warning because flexible array members have incomplete type[1]. There are some instances of code in which the sizeof operator is being incorrectly/erroneously applied to zero-length arrays and the result is zero. Such instances may be hiding some bugs. So, this work (flexible-array member conversions) will also help to get completely rid of those sorts of issues. This issue was found with the help of Coccinelle. [1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html [2] https://github.com/KSPP/linux/issues/21 [3] commit 76497732932f ("cxgb3/l2t: Fix undefined behaviour") Link: https://lore.kernel.org/r/20200507192147.GA16206@embeddedor Reviewed-by: John Garry <john.garry@huawei.com> Reviewed-by: Jason Yan <yanaijie@huawei.com> Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-05-07 19:21:47 +00:00
u8 linked_list[];
[SCSI] aic94xx: new driver This is the end point of the separate aic94xx driver based on the original driver and transport class from Luben Tuikov <ltuikov@yahoo.com> The log of the separate development is: Alexis Bruemmer: o aic94xx: fix hotplug/unplug for expanderless systems o aic94xx: disable split completion timer/setting by default o aic94xx: wide port off expander support o aic94xx: remove various inline functions o aic94xx: use bitops o aic94xx: remove queue comment o aic94xx: remove sas_common.c o aic94xx: sas remove depot's o aic94xx: use available list_for_each_entry_safe_reverse() o aic94xx: sas header file merge James Bottomley: o aic94xx: fix TF_TMF_NO_CTX processing o aic94xx: convert to request_firmware interface o aic94xx: fix hotplug/unplug o aic94xx: add link error counts to the expander phys o aic94xx: add transport class phy reset capability o aic94xx: remove local_attached flag o Remove README o Fixup Makefile variable for libsas rename o Rename sas->libsas o aic94xx: correct return code for sas_discover_event o aic94xx: use parent backlink port o aic94xx: remove channel abstraction o aic94xx: fix routing algorithms o aic94xx: add backlink port o aic94xx: fix cascaded expander properties o aic94xx: fix sleep under lock o aic94xx: fix panic on module removal in complex topology o aic94xx: make use of the new sas_port o rename sas_port to asd_sas_port o Fix for eh_strategy_handler move o aic94xx: move entirely over to correct transport class formulation o remove last vestages of sas_rphy_alloc() o update for eh_timed_out move o Preliminary expander support for aic94xx o sas: remove event thread o minor warning cleanups o remove last vestiges of id mapping arrays o Further updates o Convert aic94xx over entirely to the transport class end device and o update aic94xx/sas to use the new sas transport class end device o [PATCH] aic94xx: attaching to the sas transport class o Add missing completion removal from prior patch o [PATCH] aic94xx: attaching to the sas transport class o Build fixes from akpm Jeff Garzik: o [scsi aic94xx] Remove ->owner from PCI info table Luben Tuikov: o initial aic94xx driver Mike Anderson: o aic94xx: fix panic on module insertion o aic94xx: stub out SATA_DEV case o aic94xx: compile warning cleanups o aic94xx: sas_alloc_task o aic94xx: ref count update o aic94xx nexus loss time value o [PATCH] aic94xx: driver assertion in non-x86 BIOS env Randy Dunlap: o libsas: externs not needed Robert Tarte: o aic94xx: sequence patch - fixes SATA support Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-08-29 14:22:51 +00:00
} __attribute__ ((packed));
struct asd_manuf_phy_desc {
u8 state; /* low 4 bits */
#define MS_PHY_STATE_ENABLED 0
[SCSI] aic94xx: new driver This is the end point of the separate aic94xx driver based on the original driver and transport class from Luben Tuikov <ltuikov@yahoo.com> The log of the separate development is: Alexis Bruemmer: o aic94xx: fix hotplug/unplug for expanderless systems o aic94xx: disable split completion timer/setting by default o aic94xx: wide port off expander support o aic94xx: remove various inline functions o aic94xx: use bitops o aic94xx: remove queue comment o aic94xx: remove sas_common.c o aic94xx: sas remove depot's o aic94xx: use available list_for_each_entry_safe_reverse() o aic94xx: sas header file merge James Bottomley: o aic94xx: fix TF_TMF_NO_CTX processing o aic94xx: convert to request_firmware interface o aic94xx: fix hotplug/unplug o aic94xx: add link error counts to the expander phys o aic94xx: add transport class phy reset capability o aic94xx: remove local_attached flag o Remove README o Fixup Makefile variable for libsas rename o Rename sas->libsas o aic94xx: correct return code for sas_discover_event o aic94xx: use parent backlink port o aic94xx: remove channel abstraction o aic94xx: fix routing algorithms o aic94xx: add backlink port o aic94xx: fix cascaded expander properties o aic94xx: fix sleep under lock o aic94xx: fix panic on module removal in complex topology o aic94xx: make use of the new sas_port o rename sas_port to asd_sas_port o Fix for eh_strategy_handler move o aic94xx: move entirely over to correct transport class formulation o remove last vestages of sas_rphy_alloc() o update for eh_timed_out move o Preliminary expander support for aic94xx o sas: remove event thread o minor warning cleanups o remove last vestiges of id mapping arrays o Further updates o Convert aic94xx over entirely to the transport class end device and o update aic94xx/sas to use the new sas transport class end device o [PATCH] aic94xx: attaching to the sas transport class o Add missing completion removal from prior patch o [PATCH] aic94xx: attaching to the sas transport class o Build fixes from akpm Jeff Garzik: o [scsi aic94xx] Remove ->owner from PCI info table Luben Tuikov: o initial aic94xx driver Mike Anderson: o aic94xx: fix panic on module insertion o aic94xx: stub out SATA_DEV case o aic94xx: compile warning cleanups o aic94xx: sas_alloc_task o aic94xx: ref count update o aic94xx nexus loss time value o [PATCH] aic94xx: driver assertion in non-x86 BIOS env Randy Dunlap: o libsas: externs not needed Robert Tarte: o aic94xx: sequence patch - fixes SATA support Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-08-29 14:22:51 +00:00
#define MS_PHY_STATE_REPORTED 1
#define MS_PHY_STATE_HIDDEN 2
u8 phy_id;
u16 _r;
u8 phy_control_0; /* mode 5 reg 0x160 */
u8 phy_control_1; /* mode 5 reg 0x161 */
u8 phy_control_2; /* mode 5 reg 0x162 */
u8 phy_control_3; /* mode 5 reg 0x163 */
} __attribute__ ((packed));
struct asd_manuf_phy_param {
char sig[2]; /* 'P', 'M' */
u16 next;
u8 maj; /* 0 */
u8 min; /* 2 */
u8 num_phy_desc; /* 8 */
u8 phy_desc_size; /* 8 */
u8 _r[3];
u8 usage_model_id;
u32 _r2;
struct asd_manuf_phy_desc phy_desc[ASD_MAX_PHYS];
} __attribute__ ((packed));
#if 0
static const char *asd_sb_type[] = {
"unknown",
"SGPIO",
[2 ... 0x7F] = "unknown",
[0x80] = "ADPT_I2C",
[0x81 ... 0xFF] = "VENDOR_UNIQUExx"
};
#endif
struct asd_ms_sb_desc {
u8 type;
u8 node_desc_index;
u8 conn_desc_index;
scsi: libsas: Replace zero-length array with flexible-array The current codebase makes use of the zero-length array language extension to the C90 standard, but the preferred mechanism to declare variable-length types such as these ones is a flexible array member[1][2], introduced in C99: struct foo { int stuff; struct boo array[]; }; By making use of the mechanism above, we will get a compiler warning in case the flexible array does not occur last in the structure, which will help us prevent some kind of undefined behavior bugs from being inadvertently introduced[3] to the codebase from now on. Also, notice that, dynamic memory allocations won't be affected by this change: "Flexible array members have incomplete type, and so the sizeof operator may not be applied. As a quirk of the original implementation of zero-length arrays, sizeof evaluates to zero."[1] sizeof(flexible-array-member) triggers a warning because flexible array members have incomplete type[1]. There are some instances of code in which the sizeof operator is being incorrectly/erroneously applied to zero-length arrays and the result is zero. Such instances may be hiding some bugs. So, this work (flexible-array member conversions) will also help to get completely rid of those sorts of issues. This issue was found with the help of Coccinelle. [1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html [2] https://github.com/KSPP/linux/issues/21 [3] commit 76497732932f ("cxgb3/l2t: Fix undefined behaviour") Link: https://lore.kernel.org/r/20200507192147.GA16206@embeddedor Reviewed-by: John Garry <john.garry@huawei.com> Reviewed-by: Jason Yan <yanaijie@huawei.com> Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-05-07 19:21:47 +00:00
u8 _recvd[];
[SCSI] aic94xx: new driver This is the end point of the separate aic94xx driver based on the original driver and transport class from Luben Tuikov <ltuikov@yahoo.com> The log of the separate development is: Alexis Bruemmer: o aic94xx: fix hotplug/unplug for expanderless systems o aic94xx: disable split completion timer/setting by default o aic94xx: wide port off expander support o aic94xx: remove various inline functions o aic94xx: use bitops o aic94xx: remove queue comment o aic94xx: remove sas_common.c o aic94xx: sas remove depot's o aic94xx: use available list_for_each_entry_safe_reverse() o aic94xx: sas header file merge James Bottomley: o aic94xx: fix TF_TMF_NO_CTX processing o aic94xx: convert to request_firmware interface o aic94xx: fix hotplug/unplug o aic94xx: add link error counts to the expander phys o aic94xx: add transport class phy reset capability o aic94xx: remove local_attached flag o Remove README o Fixup Makefile variable for libsas rename o Rename sas->libsas o aic94xx: correct return code for sas_discover_event o aic94xx: use parent backlink port o aic94xx: remove channel abstraction o aic94xx: fix routing algorithms o aic94xx: add backlink port o aic94xx: fix cascaded expander properties o aic94xx: fix sleep under lock o aic94xx: fix panic on module removal in complex topology o aic94xx: make use of the new sas_port o rename sas_port to asd_sas_port o Fix for eh_strategy_handler move o aic94xx: move entirely over to correct transport class formulation o remove last vestages of sas_rphy_alloc() o update for eh_timed_out move o Preliminary expander support for aic94xx o sas: remove event thread o minor warning cleanups o remove last vestiges of id mapping arrays o Further updates o Convert aic94xx over entirely to the transport class end device and o update aic94xx/sas to use the new sas transport class end device o [PATCH] aic94xx: attaching to the sas transport class o Add missing completion removal from prior patch o [PATCH] aic94xx: attaching to the sas transport class o Build fixes from akpm Jeff Garzik: o [scsi aic94xx] Remove ->owner from PCI info table Luben Tuikov: o initial aic94xx driver Mike Anderson: o aic94xx: fix panic on module insertion o aic94xx: stub out SATA_DEV case o aic94xx: compile warning cleanups o aic94xx: sas_alloc_task o aic94xx: ref count update o aic94xx nexus loss time value o [PATCH] aic94xx: driver assertion in non-x86 BIOS env Randy Dunlap: o libsas: externs not needed Robert Tarte: o aic94xx: sequence patch - fixes SATA support Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-08-29 14:22:51 +00:00
} __attribute__ ((packed));
#if 0
static const char *asd_conn_type[] = {
[0 ... 7] = "unknown",
"SFF8470",
"SFF8482",
"SFF8484",
[0x80] = "PCIX_DAUGHTER0",
[0x81] = "SAS_DAUGHTER0",
[0x82 ... 0xFF] = "VENDOR_UNIQUExx"
};
static const char *asd_conn_location[] = {
"unknown",
"internal",
"external",
"board_to_board",
};
#endif
struct asd_ms_conn_desc {
u8 type;
u8 location;
u8 num_sideband_desc;
u8 size_sideband_desc;
u32 _resvd;
u8 name[16];
scsi: libsas: Replace zero-length array with flexible-array The current codebase makes use of the zero-length array language extension to the C90 standard, but the preferred mechanism to declare variable-length types such as these ones is a flexible array member[1][2], introduced in C99: struct foo { int stuff; struct boo array[]; }; By making use of the mechanism above, we will get a compiler warning in case the flexible array does not occur last in the structure, which will help us prevent some kind of undefined behavior bugs from being inadvertently introduced[3] to the codebase from now on. Also, notice that, dynamic memory allocations won't be affected by this change: "Flexible array members have incomplete type, and so the sizeof operator may not be applied. As a quirk of the original implementation of zero-length arrays, sizeof evaluates to zero."[1] sizeof(flexible-array-member) triggers a warning because flexible array members have incomplete type[1]. There are some instances of code in which the sizeof operator is being incorrectly/erroneously applied to zero-length arrays and the result is zero. Such instances may be hiding some bugs. So, this work (flexible-array member conversions) will also help to get completely rid of those sorts of issues. This issue was found with the help of Coccinelle. [1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html [2] https://github.com/KSPP/linux/issues/21 [3] commit 76497732932f ("cxgb3/l2t: Fix undefined behaviour") Link: https://lore.kernel.org/r/20200507192147.GA16206@embeddedor Reviewed-by: John Garry <john.garry@huawei.com> Reviewed-by: Jason Yan <yanaijie@huawei.com> Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-05-07 19:21:47 +00:00
struct asd_ms_sb_desc sb_desc[];
[SCSI] aic94xx: new driver This is the end point of the separate aic94xx driver based on the original driver and transport class from Luben Tuikov <ltuikov@yahoo.com> The log of the separate development is: Alexis Bruemmer: o aic94xx: fix hotplug/unplug for expanderless systems o aic94xx: disable split completion timer/setting by default o aic94xx: wide port off expander support o aic94xx: remove various inline functions o aic94xx: use bitops o aic94xx: remove queue comment o aic94xx: remove sas_common.c o aic94xx: sas remove depot's o aic94xx: use available list_for_each_entry_safe_reverse() o aic94xx: sas header file merge James Bottomley: o aic94xx: fix TF_TMF_NO_CTX processing o aic94xx: convert to request_firmware interface o aic94xx: fix hotplug/unplug o aic94xx: add link error counts to the expander phys o aic94xx: add transport class phy reset capability o aic94xx: remove local_attached flag o Remove README o Fixup Makefile variable for libsas rename o Rename sas->libsas o aic94xx: correct return code for sas_discover_event o aic94xx: use parent backlink port o aic94xx: remove channel abstraction o aic94xx: fix routing algorithms o aic94xx: add backlink port o aic94xx: fix cascaded expander properties o aic94xx: fix sleep under lock o aic94xx: fix panic on module removal in complex topology o aic94xx: make use of the new sas_port o rename sas_port to asd_sas_port o Fix for eh_strategy_handler move o aic94xx: move entirely over to correct transport class formulation o remove last vestages of sas_rphy_alloc() o update for eh_timed_out move o Preliminary expander support for aic94xx o sas: remove event thread o minor warning cleanups o remove last vestiges of id mapping arrays o Further updates o Convert aic94xx over entirely to the transport class end device and o update aic94xx/sas to use the new sas transport class end device o [PATCH] aic94xx: attaching to the sas transport class o Add missing completion removal from prior patch o [PATCH] aic94xx: attaching to the sas transport class o Build fixes from akpm Jeff Garzik: o [scsi aic94xx] Remove ->owner from PCI info table Luben Tuikov: o initial aic94xx driver Mike Anderson: o aic94xx: fix panic on module insertion o aic94xx: stub out SATA_DEV case o aic94xx: compile warning cleanups o aic94xx: sas_alloc_task o aic94xx: ref count update o aic94xx nexus loss time value o [PATCH] aic94xx: driver assertion in non-x86 BIOS env Randy Dunlap: o libsas: externs not needed Robert Tarte: o aic94xx: sequence patch - fixes SATA support Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-08-29 14:22:51 +00:00
} __attribute__ ((packed));
struct asd_nd_phy_desc {
u8 vp_attch_type;
scsi: libsas: Replace zero-length array with flexible-array The current codebase makes use of the zero-length array language extension to the C90 standard, but the preferred mechanism to declare variable-length types such as these ones is a flexible array member[1][2], introduced in C99: struct foo { int stuff; struct boo array[]; }; By making use of the mechanism above, we will get a compiler warning in case the flexible array does not occur last in the structure, which will help us prevent some kind of undefined behavior bugs from being inadvertently introduced[3] to the codebase from now on. Also, notice that, dynamic memory allocations won't be affected by this change: "Flexible array members have incomplete type, and so the sizeof operator may not be applied. As a quirk of the original implementation of zero-length arrays, sizeof evaluates to zero."[1] sizeof(flexible-array-member) triggers a warning because flexible array members have incomplete type[1]. There are some instances of code in which the sizeof operator is being incorrectly/erroneously applied to zero-length arrays and the result is zero. Such instances may be hiding some bugs. So, this work (flexible-array member conversions) will also help to get completely rid of those sorts of issues. This issue was found with the help of Coccinelle. [1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html [2] https://github.com/KSPP/linux/issues/21 [3] commit 76497732932f ("cxgb3/l2t: Fix undefined behaviour") Link: https://lore.kernel.org/r/20200507192147.GA16206@embeddedor Reviewed-by: John Garry <john.garry@huawei.com> Reviewed-by: Jason Yan <yanaijie@huawei.com> Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-05-07 19:21:47 +00:00
u8 attch_specific[];
[SCSI] aic94xx: new driver This is the end point of the separate aic94xx driver based on the original driver and transport class from Luben Tuikov <ltuikov@yahoo.com> The log of the separate development is: Alexis Bruemmer: o aic94xx: fix hotplug/unplug for expanderless systems o aic94xx: disable split completion timer/setting by default o aic94xx: wide port off expander support o aic94xx: remove various inline functions o aic94xx: use bitops o aic94xx: remove queue comment o aic94xx: remove sas_common.c o aic94xx: sas remove depot's o aic94xx: use available list_for_each_entry_safe_reverse() o aic94xx: sas header file merge James Bottomley: o aic94xx: fix TF_TMF_NO_CTX processing o aic94xx: convert to request_firmware interface o aic94xx: fix hotplug/unplug o aic94xx: add link error counts to the expander phys o aic94xx: add transport class phy reset capability o aic94xx: remove local_attached flag o Remove README o Fixup Makefile variable for libsas rename o Rename sas->libsas o aic94xx: correct return code for sas_discover_event o aic94xx: use parent backlink port o aic94xx: remove channel abstraction o aic94xx: fix routing algorithms o aic94xx: add backlink port o aic94xx: fix cascaded expander properties o aic94xx: fix sleep under lock o aic94xx: fix panic on module removal in complex topology o aic94xx: make use of the new sas_port o rename sas_port to asd_sas_port o Fix for eh_strategy_handler move o aic94xx: move entirely over to correct transport class formulation o remove last vestages of sas_rphy_alloc() o update for eh_timed_out move o Preliminary expander support for aic94xx o sas: remove event thread o minor warning cleanups o remove last vestiges of id mapping arrays o Further updates o Convert aic94xx over entirely to the transport class end device and o update aic94xx/sas to use the new sas transport class end device o [PATCH] aic94xx: attaching to the sas transport class o Add missing completion removal from prior patch o [PATCH] aic94xx: attaching to the sas transport class o Build fixes from akpm Jeff Garzik: o [scsi aic94xx] Remove ->owner from PCI info table Luben Tuikov: o initial aic94xx driver Mike Anderson: o aic94xx: fix panic on module insertion o aic94xx: stub out SATA_DEV case o aic94xx: compile warning cleanups o aic94xx: sas_alloc_task o aic94xx: ref count update o aic94xx nexus loss time value o [PATCH] aic94xx: driver assertion in non-x86 BIOS env Randy Dunlap: o libsas: externs not needed Robert Tarte: o aic94xx: sequence patch - fixes SATA support Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-08-29 14:22:51 +00:00
} __attribute__ ((packed));
#if 0
static const char *asd_node_type[] = {
"IOP",
"IO_CONTROLLER",
"EXPANDER",
"PORT_MULTIPLIER",
"PORT_MULTIPLEXER",
"MULTI_DROP_I2C_BUS",
};
#endif
struct asd_ms_node_desc {
u8 type;
u8 num_phy_desc;
u8 size_phy_desc;
u8 _resvd;
u8 name[16];
scsi: libsas: Replace zero-length array with flexible-array The current codebase makes use of the zero-length array language extension to the C90 standard, but the preferred mechanism to declare variable-length types such as these ones is a flexible array member[1][2], introduced in C99: struct foo { int stuff; struct boo array[]; }; By making use of the mechanism above, we will get a compiler warning in case the flexible array does not occur last in the structure, which will help us prevent some kind of undefined behavior bugs from being inadvertently introduced[3] to the codebase from now on. Also, notice that, dynamic memory allocations won't be affected by this change: "Flexible array members have incomplete type, and so the sizeof operator may not be applied. As a quirk of the original implementation of zero-length arrays, sizeof evaluates to zero."[1] sizeof(flexible-array-member) triggers a warning because flexible array members have incomplete type[1]. There are some instances of code in which the sizeof operator is being incorrectly/erroneously applied to zero-length arrays and the result is zero. Such instances may be hiding some bugs. So, this work (flexible-array member conversions) will also help to get completely rid of those sorts of issues. This issue was found with the help of Coccinelle. [1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html [2] https://github.com/KSPP/linux/issues/21 [3] commit 76497732932f ("cxgb3/l2t: Fix undefined behaviour") Link: https://lore.kernel.org/r/20200507192147.GA16206@embeddedor Reviewed-by: John Garry <john.garry@huawei.com> Reviewed-by: Jason Yan <yanaijie@huawei.com> Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-05-07 19:21:47 +00:00
struct asd_nd_phy_desc phy_desc[];
[SCSI] aic94xx: new driver This is the end point of the separate aic94xx driver based on the original driver and transport class from Luben Tuikov <ltuikov@yahoo.com> The log of the separate development is: Alexis Bruemmer: o aic94xx: fix hotplug/unplug for expanderless systems o aic94xx: disable split completion timer/setting by default o aic94xx: wide port off expander support o aic94xx: remove various inline functions o aic94xx: use bitops o aic94xx: remove queue comment o aic94xx: remove sas_common.c o aic94xx: sas remove depot's o aic94xx: use available list_for_each_entry_safe_reverse() o aic94xx: sas header file merge James Bottomley: o aic94xx: fix TF_TMF_NO_CTX processing o aic94xx: convert to request_firmware interface o aic94xx: fix hotplug/unplug o aic94xx: add link error counts to the expander phys o aic94xx: add transport class phy reset capability o aic94xx: remove local_attached flag o Remove README o Fixup Makefile variable for libsas rename o Rename sas->libsas o aic94xx: correct return code for sas_discover_event o aic94xx: use parent backlink port o aic94xx: remove channel abstraction o aic94xx: fix routing algorithms o aic94xx: add backlink port o aic94xx: fix cascaded expander properties o aic94xx: fix sleep under lock o aic94xx: fix panic on module removal in complex topology o aic94xx: make use of the new sas_port o rename sas_port to asd_sas_port o Fix for eh_strategy_handler move o aic94xx: move entirely over to correct transport class formulation o remove last vestages of sas_rphy_alloc() o update for eh_timed_out move o Preliminary expander support for aic94xx o sas: remove event thread o minor warning cleanups o remove last vestiges of id mapping arrays o Further updates o Convert aic94xx over entirely to the transport class end device and o update aic94xx/sas to use the new sas transport class end device o [PATCH] aic94xx: attaching to the sas transport class o Add missing completion removal from prior patch o [PATCH] aic94xx: attaching to the sas transport class o Build fixes from akpm Jeff Garzik: o [scsi aic94xx] Remove ->owner from PCI info table Luben Tuikov: o initial aic94xx driver Mike Anderson: o aic94xx: fix panic on module insertion o aic94xx: stub out SATA_DEV case o aic94xx: compile warning cleanups o aic94xx: sas_alloc_task o aic94xx: ref count update o aic94xx nexus loss time value o [PATCH] aic94xx: driver assertion in non-x86 BIOS env Randy Dunlap: o libsas: externs not needed Robert Tarte: o aic94xx: sequence patch - fixes SATA support Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-08-29 14:22:51 +00:00
} __attribute__ ((packed));
struct asd_ms_conn_map {
char sig[2]; /* 'M', 'C' */
__le16 next;
u8 maj; /* 0 */
u8 min; /* 0 */
__le16 cm_size; /* size of this struct */
u8 num_conn;
u8 conn_size;
u8 num_nodes;
u8 usage_model_id;
u32 _resvd;
treewide: Replace open-coded flex arrays in unions In support of enabling -Warray-bounds and -Wzero-length-bounds and correctly handling run-time memcpy() bounds checking, replace all open-coded flexible arrays (i.e. 0-element arrays) in unions with the DECLARE_FLEX_ARRAY() helper macro. This fixes warnings such as: fs/hpfs/anode.c: In function 'hpfs_add_sector_to_btree': fs/hpfs/anode.c:209:27: warning: array subscript 0 is outside the bounds of an interior zero-length array 'struct bplus_internal_node[0]' [-Wzero-length-bounds] 209 | anode->btree.u.internal[0].down = cpu_to_le32(a); | ~~~~~~~~~~~~~~~~~~~~~~~^~~ In file included from fs/hpfs/hpfs_fn.h:26, from fs/hpfs/anode.c:10: fs/hpfs/hpfs.h:412:32: note: while referencing 'internal' 412 | struct bplus_internal_node internal[0]; /* (internal) 2-word entries giving | ^~~~~~~~ drivers/net/can/usb/etas_es58x/es58x_fd.c: In function 'es58x_fd_tx_can_msg': drivers/net/can/usb/etas_es58x/es58x_fd.c:360:35: warning: array subscript 65535 is outside the bounds of an interior zero-length array 'u8[0]' {aka 'unsigned char[]'} [-Wzero-length-bounds] 360 | tx_can_msg = (typeof(tx_can_msg))&es58x_fd_urb_cmd->raw_msg[msg_len]; | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ In file included from drivers/net/can/usb/etas_es58x/es58x_core.h:22, from drivers/net/can/usb/etas_es58x/es58x_fd.c:17: drivers/net/can/usb/etas_es58x/es58x_fd.h:231:6: note: while referencing 'raw_msg' 231 | u8 raw_msg[0]; | ^~~~~~~ Cc: "Gustavo A. R. Silva" <gustavoars@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Ayush Sawal <ayush.sawal@chelsio.com> Cc: Vinay Kumar Yadav <vinay.yadav@chelsio.com> Cc: Rohit Maheshwari <rohitm@chelsio.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: "David S. Miller" <davem@davemloft.net> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Stanislaw Gruszka <stf_xl@wp.pl> Cc: Luca Coelho <luciano.coelho@intel.com> Cc: "James E.J. Bottomley" <jejb@linux.ibm.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Andrii Nakryiko <andrii@kernel.org> Cc: Martin KaFai Lau <kafai@fb.com> Cc: Song Liu <songliubraving@fb.com> Cc: Yonghong Song <yhs@fb.com> Cc: John Fastabend <john.fastabend@gmail.com> Cc: KP Singh <kpsingh@kernel.org> Cc: Johannes Berg <johannes.berg@intel.com> Cc: Mordechay Goodstein <mordechay.goodstein@intel.com> Cc: Lee Jones <lee.jones@linaro.org> Cc: Wolfgang Grandegger <wg@grandegger.com> Cc: Marc Kleine-Budde <mkl@pengutronix.de> Cc: Arunachalam Santhanam <arunachalam.santhanam@in.bosch.com> Cc: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Cc: Mikulas Patocka <mikulas@artax.karlin.mff.cuni.cz> Cc: linux-crypto@vger.kernel.org Cc: ath10k@lists.infradead.org Cc: linux-wireless@vger.kernel.org Cc: netdev@vger.kernel.org Cc: linux-scsi@vger.kernel.org Cc: linux-can@vger.kernel.org Cc: bpf@vger.kernel.org Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> # drivers/net/can/usb/etas_es58x/* Signed-off-by: Kees Cook <keescook@chromium.org>
2021-08-09 18:29:33 +00:00
union {
DECLARE_FLEX_ARRAY(struct asd_ms_conn_desc, conn_desc);
DECLARE_FLEX_ARRAY(struct asd_ms_node_desc, node_desc);
};
[SCSI] aic94xx: new driver This is the end point of the separate aic94xx driver based on the original driver and transport class from Luben Tuikov <ltuikov@yahoo.com> The log of the separate development is: Alexis Bruemmer: o aic94xx: fix hotplug/unplug for expanderless systems o aic94xx: disable split completion timer/setting by default o aic94xx: wide port off expander support o aic94xx: remove various inline functions o aic94xx: use bitops o aic94xx: remove queue comment o aic94xx: remove sas_common.c o aic94xx: sas remove depot's o aic94xx: use available list_for_each_entry_safe_reverse() o aic94xx: sas header file merge James Bottomley: o aic94xx: fix TF_TMF_NO_CTX processing o aic94xx: convert to request_firmware interface o aic94xx: fix hotplug/unplug o aic94xx: add link error counts to the expander phys o aic94xx: add transport class phy reset capability o aic94xx: remove local_attached flag o Remove README o Fixup Makefile variable for libsas rename o Rename sas->libsas o aic94xx: correct return code for sas_discover_event o aic94xx: use parent backlink port o aic94xx: remove channel abstraction o aic94xx: fix routing algorithms o aic94xx: add backlink port o aic94xx: fix cascaded expander properties o aic94xx: fix sleep under lock o aic94xx: fix panic on module removal in complex topology o aic94xx: make use of the new sas_port o rename sas_port to asd_sas_port o Fix for eh_strategy_handler move o aic94xx: move entirely over to correct transport class formulation o remove last vestages of sas_rphy_alloc() o update for eh_timed_out move o Preliminary expander support for aic94xx o sas: remove event thread o minor warning cleanups o remove last vestiges of id mapping arrays o Further updates o Convert aic94xx over entirely to the transport class end device and o update aic94xx/sas to use the new sas transport class end device o [PATCH] aic94xx: attaching to the sas transport class o Add missing completion removal from prior patch o [PATCH] aic94xx: attaching to the sas transport class o Build fixes from akpm Jeff Garzik: o [scsi aic94xx] Remove ->owner from PCI info table Luben Tuikov: o initial aic94xx driver Mike Anderson: o aic94xx: fix panic on module insertion o aic94xx: stub out SATA_DEV case o aic94xx: compile warning cleanups o aic94xx: sas_alloc_task o aic94xx: ref count update o aic94xx nexus loss time value o [PATCH] aic94xx: driver assertion in non-x86 BIOS env Randy Dunlap: o libsas: externs not needed Robert Tarte: o aic94xx: sequence patch - fixes SATA support Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-08-29 14:22:51 +00:00
} __attribute__ ((packed));
struct asd_ctrla_phy_entry {
u8 sas_addr[SAS_ADDR_SIZE];
u8 sas_link_rates; /* max in hi bits, min in low bits */
u8 flags;
u8 sata_link_rates;
u8 _r[5];
} __attribute__ ((packed));
struct asd_ctrla_phy_settings {
u8 id0; /* P'h'y */
u8 _r;
u16 next;
u8 num_phys; /* number of PHYs in the PCI function */
u8 _r2[3];
struct asd_ctrla_phy_entry phy_ent[ASD_MAX_PHYS];
} __attribute__ ((packed));
struct asd_ll_el {
u8 id0;
u8 id1;
__le16 next;
scsi: libsas: Replace zero-length array with flexible-array The current codebase makes use of the zero-length array language extension to the C90 standard, but the preferred mechanism to declare variable-length types such as these ones is a flexible array member[1][2], introduced in C99: struct foo { int stuff; struct boo array[]; }; By making use of the mechanism above, we will get a compiler warning in case the flexible array does not occur last in the structure, which will help us prevent some kind of undefined behavior bugs from being inadvertently introduced[3] to the codebase from now on. Also, notice that, dynamic memory allocations won't be affected by this change: "Flexible array members have incomplete type, and so the sizeof operator may not be applied. As a quirk of the original implementation of zero-length arrays, sizeof evaluates to zero."[1] sizeof(flexible-array-member) triggers a warning because flexible array members have incomplete type[1]. There are some instances of code in which the sizeof operator is being incorrectly/erroneously applied to zero-length arrays and the result is zero. Such instances may be hiding some bugs. So, this work (flexible-array member conversions) will also help to get completely rid of those sorts of issues. This issue was found with the help of Coccinelle. [1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html [2] https://github.com/KSPP/linux/issues/21 [3] commit 76497732932f ("cxgb3/l2t: Fix undefined behaviour") Link: https://lore.kernel.org/r/20200507192147.GA16206@embeddedor Reviewed-by: John Garry <john.garry@huawei.com> Reviewed-by: Jason Yan <yanaijie@huawei.com> Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2020-05-07 19:21:47 +00:00
u8 something_here[];
[SCSI] aic94xx: new driver This is the end point of the separate aic94xx driver based on the original driver and transport class from Luben Tuikov <ltuikov@yahoo.com> The log of the separate development is: Alexis Bruemmer: o aic94xx: fix hotplug/unplug for expanderless systems o aic94xx: disable split completion timer/setting by default o aic94xx: wide port off expander support o aic94xx: remove various inline functions o aic94xx: use bitops o aic94xx: remove queue comment o aic94xx: remove sas_common.c o aic94xx: sas remove depot's o aic94xx: use available list_for_each_entry_safe_reverse() o aic94xx: sas header file merge James Bottomley: o aic94xx: fix TF_TMF_NO_CTX processing o aic94xx: convert to request_firmware interface o aic94xx: fix hotplug/unplug o aic94xx: add link error counts to the expander phys o aic94xx: add transport class phy reset capability o aic94xx: remove local_attached flag o Remove README o Fixup Makefile variable for libsas rename o Rename sas->libsas o aic94xx: correct return code for sas_discover_event o aic94xx: use parent backlink port o aic94xx: remove channel abstraction o aic94xx: fix routing algorithms o aic94xx: add backlink port o aic94xx: fix cascaded expander properties o aic94xx: fix sleep under lock o aic94xx: fix panic on module removal in complex topology o aic94xx: make use of the new sas_port o rename sas_port to asd_sas_port o Fix for eh_strategy_handler move o aic94xx: move entirely over to correct transport class formulation o remove last vestages of sas_rphy_alloc() o update for eh_timed_out move o Preliminary expander support for aic94xx o sas: remove event thread o minor warning cleanups o remove last vestiges of id mapping arrays o Further updates o Convert aic94xx over entirely to the transport class end device and o update aic94xx/sas to use the new sas transport class end device o [PATCH] aic94xx: attaching to the sas transport class o Add missing completion removal from prior patch o [PATCH] aic94xx: attaching to the sas transport class o Build fixes from akpm Jeff Garzik: o [scsi aic94xx] Remove ->owner from PCI info table Luben Tuikov: o initial aic94xx driver Mike Anderson: o aic94xx: fix panic on module insertion o aic94xx: stub out SATA_DEV case o aic94xx: compile warning cleanups o aic94xx: sas_alloc_task o aic94xx: ref count update o aic94xx nexus loss time value o [PATCH] aic94xx: driver assertion in non-x86 BIOS env Randy Dunlap: o libsas: externs not needed Robert Tarte: o aic94xx: sequence patch - fixes SATA support Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-08-29 14:22:51 +00:00
} __attribute__ ((packed));
static int asd_poll_flash(struct asd_ha_struct *asd_ha)
{
int c;
u8 d;
for (c = 5000; c > 0; c--) {
d = asd_read_reg_byte(asd_ha, asd_ha->hw_prof.flash.bar);
d ^= asd_read_reg_byte(asd_ha, asd_ha->hw_prof.flash.bar);
if (!d)
return 0;
udelay(5);
}
return -ENOENT;
}
static int asd_reset_flash(struct asd_ha_struct *asd_ha)
{
int err;
err = asd_poll_flash(asd_ha);
if (err)
return err;
asd_write_reg_byte(asd_ha, asd_ha->hw_prof.flash.bar, FLASH_RESET);
err = asd_poll_flash(asd_ha);
return err;
}
static int asd_read_flash_seg(struct asd_ha_struct *asd_ha,
void *buffer, u32 offs, int size)
[SCSI] aic94xx: new driver This is the end point of the separate aic94xx driver based on the original driver and transport class from Luben Tuikov <ltuikov@yahoo.com> The log of the separate development is: Alexis Bruemmer: o aic94xx: fix hotplug/unplug for expanderless systems o aic94xx: disable split completion timer/setting by default o aic94xx: wide port off expander support o aic94xx: remove various inline functions o aic94xx: use bitops o aic94xx: remove queue comment o aic94xx: remove sas_common.c o aic94xx: sas remove depot's o aic94xx: use available list_for_each_entry_safe_reverse() o aic94xx: sas header file merge James Bottomley: o aic94xx: fix TF_TMF_NO_CTX processing o aic94xx: convert to request_firmware interface o aic94xx: fix hotplug/unplug o aic94xx: add link error counts to the expander phys o aic94xx: add transport class phy reset capability o aic94xx: remove local_attached flag o Remove README o Fixup Makefile variable for libsas rename o Rename sas->libsas o aic94xx: correct return code for sas_discover_event o aic94xx: use parent backlink port o aic94xx: remove channel abstraction o aic94xx: fix routing algorithms o aic94xx: add backlink port o aic94xx: fix cascaded expander properties o aic94xx: fix sleep under lock o aic94xx: fix panic on module removal in complex topology o aic94xx: make use of the new sas_port o rename sas_port to asd_sas_port o Fix for eh_strategy_handler move o aic94xx: move entirely over to correct transport class formulation o remove last vestages of sas_rphy_alloc() o update for eh_timed_out move o Preliminary expander support for aic94xx o sas: remove event thread o minor warning cleanups o remove last vestiges of id mapping arrays o Further updates o Convert aic94xx over entirely to the transport class end device and o update aic94xx/sas to use the new sas transport class end device o [PATCH] aic94xx: attaching to the sas transport class o Add missing completion removal from prior patch o [PATCH] aic94xx: attaching to the sas transport class o Build fixes from akpm Jeff Garzik: o [scsi aic94xx] Remove ->owner from PCI info table Luben Tuikov: o initial aic94xx driver Mike Anderson: o aic94xx: fix panic on module insertion o aic94xx: stub out SATA_DEV case o aic94xx: compile warning cleanups o aic94xx: sas_alloc_task o aic94xx: ref count update o aic94xx nexus loss time value o [PATCH] aic94xx: driver assertion in non-x86 BIOS env Randy Dunlap: o libsas: externs not needed Robert Tarte: o aic94xx: sequence patch - fixes SATA support Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-08-29 14:22:51 +00:00
{
asd_read_reg_string(asd_ha, buffer, asd_ha->hw_prof.flash.bar+offs,
size);
return 0;
}
/**
* asd_find_flash_dir - finds and reads the flash directory
* @asd_ha: pointer to the host adapter structure
* @flash_dir: pointer to flash directory structure
*
* If found, the flash directory segment will be copied to
* @flash_dir. Return 1 if found, 0 if not.
*/
static int asd_find_flash_dir(struct asd_ha_struct *asd_ha,
struct asd_flash_dir *flash_dir)
{
u32 v;
for (v = 0; v < ASD_FLASH_SIZE; v += FLASH_NEXT_ENTRY_OFFS) {
[SCSI] aic94xx: new driver This is the end point of the separate aic94xx driver based on the original driver and transport class from Luben Tuikov <ltuikov@yahoo.com> The log of the separate development is: Alexis Bruemmer: o aic94xx: fix hotplug/unplug for expanderless systems o aic94xx: disable split completion timer/setting by default o aic94xx: wide port off expander support o aic94xx: remove various inline functions o aic94xx: use bitops o aic94xx: remove queue comment o aic94xx: remove sas_common.c o aic94xx: sas remove depot's o aic94xx: use available list_for_each_entry_safe_reverse() o aic94xx: sas header file merge James Bottomley: o aic94xx: fix TF_TMF_NO_CTX processing o aic94xx: convert to request_firmware interface o aic94xx: fix hotplug/unplug o aic94xx: add link error counts to the expander phys o aic94xx: add transport class phy reset capability o aic94xx: remove local_attached flag o Remove README o Fixup Makefile variable for libsas rename o Rename sas->libsas o aic94xx: correct return code for sas_discover_event o aic94xx: use parent backlink port o aic94xx: remove channel abstraction o aic94xx: fix routing algorithms o aic94xx: add backlink port o aic94xx: fix cascaded expander properties o aic94xx: fix sleep under lock o aic94xx: fix panic on module removal in complex topology o aic94xx: make use of the new sas_port o rename sas_port to asd_sas_port o Fix for eh_strategy_handler move o aic94xx: move entirely over to correct transport class formulation o remove last vestages of sas_rphy_alloc() o update for eh_timed_out move o Preliminary expander support for aic94xx o sas: remove event thread o minor warning cleanups o remove last vestiges of id mapping arrays o Further updates o Convert aic94xx over entirely to the transport class end device and o update aic94xx/sas to use the new sas transport class end device o [PATCH] aic94xx: attaching to the sas transport class o Add missing completion removal from prior patch o [PATCH] aic94xx: attaching to the sas transport class o Build fixes from akpm Jeff Garzik: o [scsi aic94xx] Remove ->owner from PCI info table Luben Tuikov: o initial aic94xx driver Mike Anderson: o aic94xx: fix panic on module insertion o aic94xx: stub out SATA_DEV case o aic94xx: compile warning cleanups o aic94xx: sas_alloc_task o aic94xx: ref count update o aic94xx nexus loss time value o [PATCH] aic94xx: driver assertion in non-x86 BIOS env Randy Dunlap: o libsas: externs not needed Robert Tarte: o aic94xx: sequence patch - fixes SATA support Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-08-29 14:22:51 +00:00
asd_read_flash_seg(asd_ha, flash_dir, v,
sizeof(FLASH_DIR_COOKIE)-1);
if (memcmp(flash_dir->cookie, FLASH_DIR_COOKIE,
sizeof(FLASH_DIR_COOKIE)-1) == 0) {
asd_ha->hw_prof.flash.dir_offs = v;
asd_read_flash_seg(asd_ha, flash_dir, v,
sizeof(*flash_dir));
return 1;
}
}
return 0;
}
static int asd_flash_getid(struct asd_ha_struct *asd_ha)
{
int err = 0;
u32 reg;
[SCSI] aic94xx: new driver This is the end point of the separate aic94xx driver based on the original driver and transport class from Luben Tuikov <ltuikov@yahoo.com> The log of the separate development is: Alexis Bruemmer: o aic94xx: fix hotplug/unplug for expanderless systems o aic94xx: disable split completion timer/setting by default o aic94xx: wide port off expander support o aic94xx: remove various inline functions o aic94xx: use bitops o aic94xx: remove queue comment o aic94xx: remove sas_common.c o aic94xx: sas remove depot's o aic94xx: use available list_for_each_entry_safe_reverse() o aic94xx: sas header file merge James Bottomley: o aic94xx: fix TF_TMF_NO_CTX processing o aic94xx: convert to request_firmware interface o aic94xx: fix hotplug/unplug o aic94xx: add link error counts to the expander phys o aic94xx: add transport class phy reset capability o aic94xx: remove local_attached flag o Remove README o Fixup Makefile variable for libsas rename o Rename sas->libsas o aic94xx: correct return code for sas_discover_event o aic94xx: use parent backlink port o aic94xx: remove channel abstraction o aic94xx: fix routing algorithms o aic94xx: add backlink port o aic94xx: fix cascaded expander properties o aic94xx: fix sleep under lock o aic94xx: fix panic on module removal in complex topology o aic94xx: make use of the new sas_port o rename sas_port to asd_sas_port o Fix for eh_strategy_handler move o aic94xx: move entirely over to correct transport class formulation o remove last vestages of sas_rphy_alloc() o update for eh_timed_out move o Preliminary expander support for aic94xx o sas: remove event thread o minor warning cleanups o remove last vestiges of id mapping arrays o Further updates o Convert aic94xx over entirely to the transport class end device and o update aic94xx/sas to use the new sas transport class end device o [PATCH] aic94xx: attaching to the sas transport class o Add missing completion removal from prior patch o [PATCH] aic94xx: attaching to the sas transport class o Build fixes from akpm Jeff Garzik: o [scsi aic94xx] Remove ->owner from PCI info table Luben Tuikov: o initial aic94xx driver Mike Anderson: o aic94xx: fix panic on module insertion o aic94xx: stub out SATA_DEV case o aic94xx: compile warning cleanups o aic94xx: sas_alloc_task o aic94xx: ref count update o aic94xx nexus loss time value o [PATCH] aic94xx: driver assertion in non-x86 BIOS env Randy Dunlap: o libsas: externs not needed Robert Tarte: o aic94xx: sequence patch - fixes SATA support Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-08-29 14:22:51 +00:00
reg = asd_read_reg_dword(asd_ha, EXSICNFGR);
if (pci_read_config_dword(asd_ha->pcidev, PCI_CONF_FLSH_BAR,
&asd_ha->hw_prof.flash.bar)) {
asd_printk("couldn't read PCI_CONF_FLSH_BAR of %s\n",
pci_name(asd_ha->pcidev));
return -ENOENT;
}
asd_ha->hw_prof.flash.present = 1;
asd_ha->hw_prof.flash.wide = reg & FLASHW ? 1 : 0;
err = asd_reset_flash(asd_ha);
if (err) {
ASD_DPRINTK("couldn't reset flash(%d)\n", err);
return err;
}
return 0;
[SCSI] aic94xx: new driver This is the end point of the separate aic94xx driver based on the original driver and transport class from Luben Tuikov <ltuikov@yahoo.com> The log of the separate development is: Alexis Bruemmer: o aic94xx: fix hotplug/unplug for expanderless systems o aic94xx: disable split completion timer/setting by default o aic94xx: wide port off expander support o aic94xx: remove various inline functions o aic94xx: use bitops o aic94xx: remove queue comment o aic94xx: remove sas_common.c o aic94xx: sas remove depot's o aic94xx: use available list_for_each_entry_safe_reverse() o aic94xx: sas header file merge James Bottomley: o aic94xx: fix TF_TMF_NO_CTX processing o aic94xx: convert to request_firmware interface o aic94xx: fix hotplug/unplug o aic94xx: add link error counts to the expander phys o aic94xx: add transport class phy reset capability o aic94xx: remove local_attached flag o Remove README o Fixup Makefile variable for libsas rename o Rename sas->libsas o aic94xx: correct return code for sas_discover_event o aic94xx: use parent backlink port o aic94xx: remove channel abstraction o aic94xx: fix routing algorithms o aic94xx: add backlink port o aic94xx: fix cascaded expander properties o aic94xx: fix sleep under lock o aic94xx: fix panic on module removal in complex topology o aic94xx: make use of the new sas_port o rename sas_port to asd_sas_port o Fix for eh_strategy_handler move o aic94xx: move entirely over to correct transport class formulation o remove last vestages of sas_rphy_alloc() o update for eh_timed_out move o Preliminary expander support for aic94xx o sas: remove event thread o minor warning cleanups o remove last vestiges of id mapping arrays o Further updates o Convert aic94xx over entirely to the transport class end device and o update aic94xx/sas to use the new sas transport class end device o [PATCH] aic94xx: attaching to the sas transport class o Add missing completion removal from prior patch o [PATCH] aic94xx: attaching to the sas transport class o Build fixes from akpm Jeff Garzik: o [scsi aic94xx] Remove ->owner from PCI info table Luben Tuikov: o initial aic94xx driver Mike Anderson: o aic94xx: fix panic on module insertion o aic94xx: stub out SATA_DEV case o aic94xx: compile warning cleanups o aic94xx: sas_alloc_task o aic94xx: ref count update o aic94xx nexus loss time value o [PATCH] aic94xx: driver assertion in non-x86 BIOS env Randy Dunlap: o libsas: externs not needed Robert Tarte: o aic94xx: sequence patch - fixes SATA support Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-08-29 14:22:51 +00:00
}
static u16 asd_calc_flash_chksum(u16 *p, int size)
{
u16 chksum = 0;
while (size-- > 0)
chksum += *p++;
return chksum;
}
static int asd_find_flash_de(struct asd_flash_dir *flash_dir, u32 entry_type,
u32 *offs, u32 *size)
{
int i;
struct asd_flash_de *de;
for (i = 0; i < FLASH_MAX_DIR_ENTRIES; i++) {
u32 type = le32_to_cpu(flash_dir->dir_entry[i].type);
type &= FLASH_DE_TYPE_MASK;
if (type == entry_type)
break;
}
if (i >= FLASH_MAX_DIR_ENTRIES)
return -ENOENT;
de = &flash_dir->dir_entry[i];
*offs = le32_to_cpu(de->offs);
*size = le32_to_cpu(de->pad_size);
return 0;
}
static int asd_validate_ms(struct asd_manuf_sec *ms)
{
if (ms->sig[0] != 'S' || ms->sig[1] != 'M') {
ASD_DPRINTK("manuf sec: no valid sig(%c%c)\n",
ms->sig[0], ms->sig[1]);
return -ENOENT;
}
if (ms->maj != 0) {
asd_printk("unsupported manuf. sector. major version:%x\n",
ms->maj);
return -ENOENT;
}
ms->offs_next = le16_to_cpu((__force __le16) ms->offs_next);
ms->chksum = le16_to_cpu((__force __le16) ms->chksum);
ms->size = le16_to_cpu((__force __le16) ms->size);
if (asd_calc_flash_chksum((u16 *)ms, ms->size/2)) {
asd_printk("failed manuf sector checksum\n");
}
return 0;
}
static int asd_ms_get_sas_addr(struct asd_ha_struct *asd_ha,
struct asd_manuf_sec *ms)
{
memcpy(asd_ha->hw_prof.sas_addr, ms->sas_addr, SAS_ADDR_SIZE);
return 0;
}
static int asd_ms_get_pcba_sn(struct asd_ha_struct *asd_ha,
struct asd_manuf_sec *ms)
{
memcpy(asd_ha->hw_prof.pcba_sn, ms->pcba_sn, ASD_PCBA_SN_SIZE);
asd_ha->hw_prof.pcba_sn[ASD_PCBA_SN_SIZE] = '\0';
return 0;
}
/**
* asd_find_ll_by_id - find a linked list entry by its id
* @start: void pointer to the first element in the linked list
* @id0: the first byte of the id (offs 0)
* @id1: the second byte of the id (offs 1)
*
* @start has to be the _base_ element start, since the
* linked list entries's offset is from this pointer.
* Some linked list entries use only the first id, in which case
* you can pass 0xFF for the second.
*/
static void *asd_find_ll_by_id(void * const start, const u8 id0, const u8 id1)
{
struct asd_ll_el *el = start;
do {
switch (id1) {
default:
if (el->id1 == id1) {
fallthrough;
[SCSI] aic94xx: new driver This is the end point of the separate aic94xx driver based on the original driver and transport class from Luben Tuikov <ltuikov@yahoo.com> The log of the separate development is: Alexis Bruemmer: o aic94xx: fix hotplug/unplug for expanderless systems o aic94xx: disable split completion timer/setting by default o aic94xx: wide port off expander support o aic94xx: remove various inline functions o aic94xx: use bitops o aic94xx: remove queue comment o aic94xx: remove sas_common.c o aic94xx: sas remove depot's o aic94xx: use available list_for_each_entry_safe_reverse() o aic94xx: sas header file merge James Bottomley: o aic94xx: fix TF_TMF_NO_CTX processing o aic94xx: convert to request_firmware interface o aic94xx: fix hotplug/unplug o aic94xx: add link error counts to the expander phys o aic94xx: add transport class phy reset capability o aic94xx: remove local_attached flag o Remove README o Fixup Makefile variable for libsas rename o Rename sas->libsas o aic94xx: correct return code for sas_discover_event o aic94xx: use parent backlink port o aic94xx: remove channel abstraction o aic94xx: fix routing algorithms o aic94xx: add backlink port o aic94xx: fix cascaded expander properties o aic94xx: fix sleep under lock o aic94xx: fix panic on module removal in complex topology o aic94xx: make use of the new sas_port o rename sas_port to asd_sas_port o Fix for eh_strategy_handler move o aic94xx: move entirely over to correct transport class formulation o remove last vestages of sas_rphy_alloc() o update for eh_timed_out move o Preliminary expander support for aic94xx o sas: remove event thread o minor warning cleanups o remove last vestiges of id mapping arrays o Further updates o Convert aic94xx over entirely to the transport class end device and o update aic94xx/sas to use the new sas transport class end device o [PATCH] aic94xx: attaching to the sas transport class o Add missing completion removal from prior patch o [PATCH] aic94xx: attaching to the sas transport class o Build fixes from akpm Jeff Garzik: o [scsi aic94xx] Remove ->owner from PCI info table Luben Tuikov: o initial aic94xx driver Mike Anderson: o aic94xx: fix panic on module insertion o aic94xx: stub out SATA_DEV case o aic94xx: compile warning cleanups o aic94xx: sas_alloc_task o aic94xx: ref count update o aic94xx nexus loss time value o [PATCH] aic94xx: driver assertion in non-x86 BIOS env Randy Dunlap: o libsas: externs not needed Robert Tarte: o aic94xx: sequence patch - fixes SATA support Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-08-29 14:22:51 +00:00
case 0xFF:
if (el->id0 == id0)
return el;
}
[SCSI] aic94xx: new driver This is the end point of the separate aic94xx driver based on the original driver and transport class from Luben Tuikov <ltuikov@yahoo.com> The log of the separate development is: Alexis Bruemmer: o aic94xx: fix hotplug/unplug for expanderless systems o aic94xx: disable split completion timer/setting by default o aic94xx: wide port off expander support o aic94xx: remove various inline functions o aic94xx: use bitops o aic94xx: remove queue comment o aic94xx: remove sas_common.c o aic94xx: sas remove depot's o aic94xx: use available list_for_each_entry_safe_reverse() o aic94xx: sas header file merge James Bottomley: o aic94xx: fix TF_TMF_NO_CTX processing o aic94xx: convert to request_firmware interface o aic94xx: fix hotplug/unplug o aic94xx: add link error counts to the expander phys o aic94xx: add transport class phy reset capability o aic94xx: remove local_attached flag o Remove README o Fixup Makefile variable for libsas rename o Rename sas->libsas o aic94xx: correct return code for sas_discover_event o aic94xx: use parent backlink port o aic94xx: remove channel abstraction o aic94xx: fix routing algorithms o aic94xx: add backlink port o aic94xx: fix cascaded expander properties o aic94xx: fix sleep under lock o aic94xx: fix panic on module removal in complex topology o aic94xx: make use of the new sas_port o rename sas_port to asd_sas_port o Fix for eh_strategy_handler move o aic94xx: move entirely over to correct transport class formulation o remove last vestages of sas_rphy_alloc() o update for eh_timed_out move o Preliminary expander support for aic94xx o sas: remove event thread o minor warning cleanups o remove last vestiges of id mapping arrays o Further updates o Convert aic94xx over entirely to the transport class end device and o update aic94xx/sas to use the new sas transport class end device o [PATCH] aic94xx: attaching to the sas transport class o Add missing completion removal from prior patch o [PATCH] aic94xx: attaching to the sas transport class o Build fixes from akpm Jeff Garzik: o [scsi aic94xx] Remove ->owner from PCI info table Luben Tuikov: o initial aic94xx driver Mike Anderson: o aic94xx: fix panic on module insertion o aic94xx: stub out SATA_DEV case o aic94xx: compile warning cleanups o aic94xx: sas_alloc_task o aic94xx: ref count update o aic94xx nexus loss time value o [PATCH] aic94xx: driver assertion in non-x86 BIOS env Randy Dunlap: o libsas: externs not needed Robert Tarte: o aic94xx: sequence patch - fixes SATA support Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-08-29 14:22:51 +00:00
}
el = start + le16_to_cpu(el->next);
} while (el != start);
return NULL;
}
/**
* asd_ms_get_phy_params - get phy parameters from the manufacturing sector
* @asd_ha: pointer to the host adapter structure
* @manuf_sec: pointer to the manufacturing sector
*
* The manufacturing sector contans also the linked list of sub-segments,
* since when it was read, its size was taken from the flash directory,
* not from the structure size.
*
* HIDDEN phys do not count in the total count. REPORTED phys cannot
* be enabled but are reported and counted towards the total.
* ENABLED phys are enabled by default and count towards the total.
[SCSI] aic94xx: new driver This is the end point of the separate aic94xx driver based on the original driver and transport class from Luben Tuikov <ltuikov@yahoo.com> The log of the separate development is: Alexis Bruemmer: o aic94xx: fix hotplug/unplug for expanderless systems o aic94xx: disable split completion timer/setting by default o aic94xx: wide port off expander support o aic94xx: remove various inline functions o aic94xx: use bitops o aic94xx: remove queue comment o aic94xx: remove sas_common.c o aic94xx: sas remove depot's o aic94xx: use available list_for_each_entry_safe_reverse() o aic94xx: sas header file merge James Bottomley: o aic94xx: fix TF_TMF_NO_CTX processing o aic94xx: convert to request_firmware interface o aic94xx: fix hotplug/unplug o aic94xx: add link error counts to the expander phys o aic94xx: add transport class phy reset capability o aic94xx: remove local_attached flag o Remove README o Fixup Makefile variable for libsas rename o Rename sas->libsas o aic94xx: correct return code for sas_discover_event o aic94xx: use parent backlink port o aic94xx: remove channel abstraction o aic94xx: fix routing algorithms o aic94xx: add backlink port o aic94xx: fix cascaded expander properties o aic94xx: fix sleep under lock o aic94xx: fix panic on module removal in complex topology o aic94xx: make use of the new sas_port o rename sas_port to asd_sas_port o Fix for eh_strategy_handler move o aic94xx: move entirely over to correct transport class formulation o remove last vestages of sas_rphy_alloc() o update for eh_timed_out move o Preliminary expander support for aic94xx o sas: remove event thread o minor warning cleanups o remove last vestiges of id mapping arrays o Further updates o Convert aic94xx over entirely to the transport class end device and o update aic94xx/sas to use the new sas transport class end device o [PATCH] aic94xx: attaching to the sas transport class o Add missing completion removal from prior patch o [PATCH] aic94xx: attaching to the sas transport class o Build fixes from akpm Jeff Garzik: o [scsi aic94xx] Remove ->owner from PCI info table Luben Tuikov: o initial aic94xx driver Mike Anderson: o aic94xx: fix panic on module insertion o aic94xx: stub out SATA_DEV case o aic94xx: compile warning cleanups o aic94xx: sas_alloc_task o aic94xx: ref count update o aic94xx nexus loss time value o [PATCH] aic94xx: driver assertion in non-x86 BIOS env Randy Dunlap: o libsas: externs not needed Robert Tarte: o aic94xx: sequence patch - fixes SATA support Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-08-29 14:22:51 +00:00
* The absolute total phy number is ASD_MAX_PHYS. hw_prof->num_phys
* merely specifies the number of phys the host adapter decided to
* report. E.g., it is possible for phys 0, 1 and 2 to be HIDDEN,
* phys 3, 4 and 5 to be REPORTED and phys 6 and 7 to be ENABLED.
[SCSI] aic94xx: new driver This is the end point of the separate aic94xx driver based on the original driver and transport class from Luben Tuikov <ltuikov@yahoo.com> The log of the separate development is: Alexis Bruemmer: o aic94xx: fix hotplug/unplug for expanderless systems o aic94xx: disable split completion timer/setting by default o aic94xx: wide port off expander support o aic94xx: remove various inline functions o aic94xx: use bitops o aic94xx: remove queue comment o aic94xx: remove sas_common.c o aic94xx: sas remove depot's o aic94xx: use available list_for_each_entry_safe_reverse() o aic94xx: sas header file merge James Bottomley: o aic94xx: fix TF_TMF_NO_CTX processing o aic94xx: convert to request_firmware interface o aic94xx: fix hotplug/unplug o aic94xx: add link error counts to the expander phys o aic94xx: add transport class phy reset capability o aic94xx: remove local_attached flag o Remove README o Fixup Makefile variable for libsas rename o Rename sas->libsas o aic94xx: correct return code for sas_discover_event o aic94xx: use parent backlink port o aic94xx: remove channel abstraction o aic94xx: fix routing algorithms o aic94xx: add backlink port o aic94xx: fix cascaded expander properties o aic94xx: fix sleep under lock o aic94xx: fix panic on module removal in complex topology o aic94xx: make use of the new sas_port o rename sas_port to asd_sas_port o Fix for eh_strategy_handler move o aic94xx: move entirely over to correct transport class formulation o remove last vestages of sas_rphy_alloc() o update for eh_timed_out move o Preliminary expander support for aic94xx o sas: remove event thread o minor warning cleanups o remove last vestiges of id mapping arrays o Further updates o Convert aic94xx over entirely to the transport class end device and o update aic94xx/sas to use the new sas transport class end device o [PATCH] aic94xx: attaching to the sas transport class o Add missing completion removal from prior patch o [PATCH] aic94xx: attaching to the sas transport class o Build fixes from akpm Jeff Garzik: o [scsi aic94xx] Remove ->owner from PCI info table Luben Tuikov: o initial aic94xx driver Mike Anderson: o aic94xx: fix panic on module insertion o aic94xx: stub out SATA_DEV case o aic94xx: compile warning cleanups o aic94xx: sas_alloc_task o aic94xx: ref count update o aic94xx nexus loss time value o [PATCH] aic94xx: driver assertion in non-x86 BIOS env Randy Dunlap: o libsas: externs not needed Robert Tarte: o aic94xx: sequence patch - fixes SATA support Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-08-29 14:22:51 +00:00
* In this case ASD_MAX_PHYS is 8, hw_prof->num_phys is 5, and only 2
* are actually enabled (enabled by default, max number of phys
* enableable in this case).
*/
static int asd_ms_get_phy_params(struct asd_ha_struct *asd_ha,
struct asd_manuf_sec *manuf_sec)
{
int i;
int en_phys = 0;
int rep_phys = 0;
struct asd_manuf_phy_param *phy_param;
struct asd_manuf_phy_param dflt_phy_param;
phy_param = asd_find_ll_by_id(manuf_sec, 'P', 'M');
if (!phy_param) {
ASD_DPRINTK("ms: no phy parameters found\n");
ASD_DPRINTK("ms: Creating default phy parameters\n");
dflt_phy_param.sig[0] = 'P';
dflt_phy_param.sig[1] = 'M';
dflt_phy_param.maj = 0;
dflt_phy_param.min = 2;
dflt_phy_param.num_phy_desc = 8;
dflt_phy_param.phy_desc_size = sizeof(struct asd_manuf_phy_desc);
for (i =0; i < ASD_MAX_PHYS; i++) {
dflt_phy_param.phy_desc[i].state = 0;
dflt_phy_param.phy_desc[i].phy_id = i;
dflt_phy_param.phy_desc[i].phy_control_0 = 0xf6;
dflt_phy_param.phy_desc[i].phy_control_1 = 0x10;
dflt_phy_param.phy_desc[i].phy_control_2 = 0x43;
dflt_phy_param.phy_desc[i].phy_control_3 = 0xeb;
}
phy_param = &dflt_phy_param;
}
if (phy_param->maj != 0) {
asd_printk("unsupported manuf. phy param major version:0x%x\n",
phy_param->maj);
return -ENOENT;
}
ASD_DPRINTK("ms: num_phy_desc: %d\n", phy_param->num_phy_desc);
asd_ha->hw_prof.enabled_phys = 0;
for (i = 0; i < phy_param->num_phy_desc; i++) {
struct asd_manuf_phy_desc *pd = &phy_param->phy_desc[i];
switch (pd->state & 0xF) {
case MS_PHY_STATE_HIDDEN:
ASD_DPRINTK("ms: phy%d: HIDDEN\n", i);
continue;
case MS_PHY_STATE_REPORTED:
ASD_DPRINTK("ms: phy%d: REPORTED\n", i);
asd_ha->hw_prof.enabled_phys &= ~(1 << i);
rep_phys++;
continue;
case MS_PHY_STATE_ENABLED:
ASD_DPRINTK("ms: phy%d: ENABLED\n", i);
[SCSI] aic94xx: new driver This is the end point of the separate aic94xx driver based on the original driver and transport class from Luben Tuikov <ltuikov@yahoo.com> The log of the separate development is: Alexis Bruemmer: o aic94xx: fix hotplug/unplug for expanderless systems o aic94xx: disable split completion timer/setting by default o aic94xx: wide port off expander support o aic94xx: remove various inline functions o aic94xx: use bitops o aic94xx: remove queue comment o aic94xx: remove sas_common.c o aic94xx: sas remove depot's o aic94xx: use available list_for_each_entry_safe_reverse() o aic94xx: sas header file merge James Bottomley: o aic94xx: fix TF_TMF_NO_CTX processing o aic94xx: convert to request_firmware interface o aic94xx: fix hotplug/unplug o aic94xx: add link error counts to the expander phys o aic94xx: add transport class phy reset capability o aic94xx: remove local_attached flag o Remove README o Fixup Makefile variable for libsas rename o Rename sas->libsas o aic94xx: correct return code for sas_discover_event o aic94xx: use parent backlink port o aic94xx: remove channel abstraction o aic94xx: fix routing algorithms o aic94xx: add backlink port o aic94xx: fix cascaded expander properties o aic94xx: fix sleep under lock o aic94xx: fix panic on module removal in complex topology o aic94xx: make use of the new sas_port o rename sas_port to asd_sas_port o Fix for eh_strategy_handler move o aic94xx: move entirely over to correct transport class formulation o remove last vestages of sas_rphy_alloc() o update for eh_timed_out move o Preliminary expander support for aic94xx o sas: remove event thread o minor warning cleanups o remove last vestiges of id mapping arrays o Further updates o Convert aic94xx over entirely to the transport class end device and o update aic94xx/sas to use the new sas transport class end device o [PATCH] aic94xx: attaching to the sas transport class o Add missing completion removal from prior patch o [PATCH] aic94xx: attaching to the sas transport class o Build fixes from akpm Jeff Garzik: o [scsi aic94xx] Remove ->owner from PCI info table Luben Tuikov: o initial aic94xx driver Mike Anderson: o aic94xx: fix panic on module insertion o aic94xx: stub out SATA_DEV case o aic94xx: compile warning cleanups o aic94xx: sas_alloc_task o aic94xx: ref count update o aic94xx nexus loss time value o [PATCH] aic94xx: driver assertion in non-x86 BIOS env Randy Dunlap: o libsas: externs not needed Robert Tarte: o aic94xx: sequence patch - fixes SATA support Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-08-29 14:22:51 +00:00
asd_ha->hw_prof.enabled_phys |= (1 << i);
en_phys++;
break;
}
asd_ha->hw_prof.phy_desc[i].phy_control_0 = pd->phy_control_0;
asd_ha->hw_prof.phy_desc[i].phy_control_1 = pd->phy_control_1;
asd_ha->hw_prof.phy_desc[i].phy_control_2 = pd->phy_control_2;
asd_ha->hw_prof.phy_desc[i].phy_control_3 = pd->phy_control_3;
}
asd_ha->hw_prof.max_phys = rep_phys + en_phys;
asd_ha->hw_prof.num_phys = en_phys;
ASD_DPRINTK("ms: max_phys:0x%x, num_phys:0x%x\n",
asd_ha->hw_prof.max_phys, asd_ha->hw_prof.num_phys);
ASD_DPRINTK("ms: enabled_phys:0x%x\n", asd_ha->hw_prof.enabled_phys);
return 0;
}
static int asd_ms_get_connector_map(struct asd_ha_struct *asd_ha,
struct asd_manuf_sec *manuf_sec)
{
struct asd_ms_conn_map *cm;
cm = asd_find_ll_by_id(manuf_sec, 'M', 'C');
if (!cm) {
ASD_DPRINTK("ms: no connector map found\n");
return 0;
}
if (cm->maj != 0) {
ASD_DPRINTK("ms: unsupported: connector map major version 0x%x"
"\n", cm->maj);
return -ENOENT;
}
/* XXX */
return 0;
}
/**
* asd_process_ms - find and extract information from the manufacturing sector
* @asd_ha: pointer to the host adapter structure
* @flash_dir: pointer to the flash directory
*/
static int asd_process_ms(struct asd_ha_struct *asd_ha,
struct asd_flash_dir *flash_dir)
{
int err;
struct asd_manuf_sec *manuf_sec;
u32 offs, size;
err = asd_find_flash_de(flash_dir, FLASH_DE_MS, &offs, &size);
if (err) {
ASD_DPRINTK("Couldn't find the manuf. sector\n");
goto out;
}
if (size == 0)
goto out;
err = -ENOMEM;
manuf_sec = kmalloc(size, GFP_KERNEL);
if (!manuf_sec) {
ASD_DPRINTK("no mem for manuf sector\n");
goto out;
}
err = asd_read_flash_seg(asd_ha, (void *)manuf_sec, offs, size);
if (err) {
ASD_DPRINTK("couldn't read manuf sector at 0x%x, size 0x%x\n",
offs, size);
goto out2;
}
err = asd_validate_ms(manuf_sec);
if (err) {
ASD_DPRINTK("couldn't validate manuf sector\n");
goto out2;
}
err = asd_ms_get_sas_addr(asd_ha, manuf_sec);
if (err) {
ASD_DPRINTK("couldn't read the SAS_ADDR\n");
goto out2;
}
ASD_DPRINTK("manuf sect SAS_ADDR %llx\n",
SAS_ADDR(asd_ha->hw_prof.sas_addr));
err = asd_ms_get_pcba_sn(asd_ha, manuf_sec);
if (err) {
ASD_DPRINTK("couldn't read the PCBA SN\n");
goto out2;
}
ASD_DPRINTK("manuf sect PCBA SN %s\n", asd_ha->hw_prof.pcba_sn);
err = asd_ms_get_phy_params(asd_ha, manuf_sec);
if (err) {
ASD_DPRINTK("ms: couldn't get phy parameters\n");
goto out2;
}
err = asd_ms_get_connector_map(asd_ha, manuf_sec);
if (err) {
ASD_DPRINTK("ms: couldn't get connector map\n");
goto out2;
}
out2:
kfree(manuf_sec);
out:
return err;
}
static int asd_process_ctrla_phy_settings(struct asd_ha_struct *asd_ha,
struct asd_ctrla_phy_settings *ps)
{
int i;
for (i = 0; i < ps->num_phys; i++) {
struct asd_ctrla_phy_entry *pe = &ps->phy_ent[i];
if (!PHY_ENABLED(asd_ha, i))
continue;
if (*(u64 *)pe->sas_addr == 0) {
asd_ha->hw_prof.enabled_phys &= ~(1 << i);
continue;
}
/* This is the SAS address which should be sent in IDENTIFY. */
memcpy(asd_ha->hw_prof.phy_desc[i].sas_addr, pe->sas_addr,
SAS_ADDR_SIZE);
asd_ha->hw_prof.phy_desc[i].max_sas_lrate =
(pe->sas_link_rates & 0xF0) >> 4;
asd_ha->hw_prof.phy_desc[i].min_sas_lrate =
(pe->sas_link_rates & 0x0F);
asd_ha->hw_prof.phy_desc[i].max_sata_lrate =
(pe->sata_link_rates & 0xF0) >> 4;
asd_ha->hw_prof.phy_desc[i].min_sata_lrate =
(pe->sata_link_rates & 0x0F);
asd_ha->hw_prof.phy_desc[i].flags = pe->flags;
ASD_DPRINTK("ctrla: phy%d: sas_addr: %llx, sas rate:0x%x-0x%x,"
" sata rate:0x%x-0x%x, flags:0x%x\n",
i,
SAS_ADDR(asd_ha->hw_prof.phy_desc[i].sas_addr),
asd_ha->hw_prof.phy_desc[i].max_sas_lrate,
asd_ha->hw_prof.phy_desc[i].min_sas_lrate,
asd_ha->hw_prof.phy_desc[i].max_sata_lrate,
asd_ha->hw_prof.phy_desc[i].min_sata_lrate,
asd_ha->hw_prof.phy_desc[i].flags);
}
return 0;
}
/**
* asd_process_ctrl_a_user - process CTRL-A user settings
* @asd_ha: pointer to the host adapter structure
* @flash_dir: pointer to the flash directory
*/
static int asd_process_ctrl_a_user(struct asd_ha_struct *asd_ha,
struct asd_flash_dir *flash_dir)
{
int err, i;
u32 offs, size;
struct asd_ll_el *el = NULL;
[SCSI] aic94xx: new driver This is the end point of the separate aic94xx driver based on the original driver and transport class from Luben Tuikov <ltuikov@yahoo.com> The log of the separate development is: Alexis Bruemmer: o aic94xx: fix hotplug/unplug for expanderless systems o aic94xx: disable split completion timer/setting by default o aic94xx: wide port off expander support o aic94xx: remove various inline functions o aic94xx: use bitops o aic94xx: remove queue comment o aic94xx: remove sas_common.c o aic94xx: sas remove depot's o aic94xx: use available list_for_each_entry_safe_reverse() o aic94xx: sas header file merge James Bottomley: o aic94xx: fix TF_TMF_NO_CTX processing o aic94xx: convert to request_firmware interface o aic94xx: fix hotplug/unplug o aic94xx: add link error counts to the expander phys o aic94xx: add transport class phy reset capability o aic94xx: remove local_attached flag o Remove README o Fixup Makefile variable for libsas rename o Rename sas->libsas o aic94xx: correct return code for sas_discover_event o aic94xx: use parent backlink port o aic94xx: remove channel abstraction o aic94xx: fix routing algorithms o aic94xx: add backlink port o aic94xx: fix cascaded expander properties o aic94xx: fix sleep under lock o aic94xx: fix panic on module removal in complex topology o aic94xx: make use of the new sas_port o rename sas_port to asd_sas_port o Fix for eh_strategy_handler move o aic94xx: move entirely over to correct transport class formulation o remove last vestages of sas_rphy_alloc() o update for eh_timed_out move o Preliminary expander support for aic94xx o sas: remove event thread o minor warning cleanups o remove last vestiges of id mapping arrays o Further updates o Convert aic94xx over entirely to the transport class end device and o update aic94xx/sas to use the new sas transport class end device o [PATCH] aic94xx: attaching to the sas transport class o Add missing completion removal from prior patch o [PATCH] aic94xx: attaching to the sas transport class o Build fixes from akpm Jeff Garzik: o [scsi aic94xx] Remove ->owner from PCI info table Luben Tuikov: o initial aic94xx driver Mike Anderson: o aic94xx: fix panic on module insertion o aic94xx: stub out SATA_DEV case o aic94xx: compile warning cleanups o aic94xx: sas_alloc_task o aic94xx: ref count update o aic94xx nexus loss time value o [PATCH] aic94xx: driver assertion in non-x86 BIOS env Randy Dunlap: o libsas: externs not needed Robert Tarte: o aic94xx: sequence patch - fixes SATA support Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-08-29 14:22:51 +00:00
struct asd_ctrla_phy_settings *ps;
struct asd_ctrla_phy_settings dflt_ps;
err = asd_find_flash_de(flash_dir, FLASH_DE_CTRL_A_USER, &offs, &size);
if (err) {
ASD_DPRINTK("couldn't find CTRL-A user settings section\n");
ASD_DPRINTK("Creating default CTRL-A user settings section\n");
dflt_ps.id0 = 'h';
dflt_ps.num_phys = 8;
for (i =0; i < ASD_MAX_PHYS; i++) {
memcpy(dflt_ps.phy_ent[i].sas_addr,
asd_ha->hw_prof.sas_addr, SAS_ADDR_SIZE);
dflt_ps.phy_ent[i].sas_link_rates = 0x98;
dflt_ps.phy_ent[i].flags = 0x0;
dflt_ps.phy_ent[i].sata_link_rates = 0x0;
}
size = sizeof(struct asd_ctrla_phy_settings);
ps = &dflt_ps;
goto out_process;
[SCSI] aic94xx: new driver This is the end point of the separate aic94xx driver based on the original driver and transport class from Luben Tuikov <ltuikov@yahoo.com> The log of the separate development is: Alexis Bruemmer: o aic94xx: fix hotplug/unplug for expanderless systems o aic94xx: disable split completion timer/setting by default o aic94xx: wide port off expander support o aic94xx: remove various inline functions o aic94xx: use bitops o aic94xx: remove queue comment o aic94xx: remove sas_common.c o aic94xx: sas remove depot's o aic94xx: use available list_for_each_entry_safe_reverse() o aic94xx: sas header file merge James Bottomley: o aic94xx: fix TF_TMF_NO_CTX processing o aic94xx: convert to request_firmware interface o aic94xx: fix hotplug/unplug o aic94xx: add link error counts to the expander phys o aic94xx: add transport class phy reset capability o aic94xx: remove local_attached flag o Remove README o Fixup Makefile variable for libsas rename o Rename sas->libsas o aic94xx: correct return code for sas_discover_event o aic94xx: use parent backlink port o aic94xx: remove channel abstraction o aic94xx: fix routing algorithms o aic94xx: add backlink port o aic94xx: fix cascaded expander properties o aic94xx: fix sleep under lock o aic94xx: fix panic on module removal in complex topology o aic94xx: make use of the new sas_port o rename sas_port to asd_sas_port o Fix for eh_strategy_handler move o aic94xx: move entirely over to correct transport class formulation o remove last vestages of sas_rphy_alloc() o update for eh_timed_out move o Preliminary expander support for aic94xx o sas: remove event thread o minor warning cleanups o remove last vestiges of id mapping arrays o Further updates o Convert aic94xx over entirely to the transport class end device and o update aic94xx/sas to use the new sas transport class end device o [PATCH] aic94xx: attaching to the sas transport class o Add missing completion removal from prior patch o [PATCH] aic94xx: attaching to the sas transport class o Build fixes from akpm Jeff Garzik: o [scsi aic94xx] Remove ->owner from PCI info table Luben Tuikov: o initial aic94xx driver Mike Anderson: o aic94xx: fix panic on module insertion o aic94xx: stub out SATA_DEV case o aic94xx: compile warning cleanups o aic94xx: sas_alloc_task o aic94xx: ref count update o aic94xx nexus loss time value o [PATCH] aic94xx: driver assertion in non-x86 BIOS env Randy Dunlap: o libsas: externs not needed Robert Tarte: o aic94xx: sequence patch - fixes SATA support Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-08-29 14:22:51 +00:00
}
if (size == 0)
goto out;
err = -ENOMEM;
el = kmalloc(size, GFP_KERNEL);
if (!el) {
ASD_DPRINTK("no mem for ctrla user settings section\n");
goto out;
}
err = asd_read_flash_seg(asd_ha, (void *)el, offs, size);
if (err) {
ASD_DPRINTK("couldn't read ctrla phy settings section\n");
goto out2;
}
err = -ENOENT;
ps = asd_find_ll_by_id(el, 'h', 0xFF);
if (!ps) {
ASD_DPRINTK("couldn't find ctrla phy settings struct\n");
goto out2;
}
out_process:
[SCSI] aic94xx: new driver This is the end point of the separate aic94xx driver based on the original driver and transport class from Luben Tuikov <ltuikov@yahoo.com> The log of the separate development is: Alexis Bruemmer: o aic94xx: fix hotplug/unplug for expanderless systems o aic94xx: disable split completion timer/setting by default o aic94xx: wide port off expander support o aic94xx: remove various inline functions o aic94xx: use bitops o aic94xx: remove queue comment o aic94xx: remove sas_common.c o aic94xx: sas remove depot's o aic94xx: use available list_for_each_entry_safe_reverse() o aic94xx: sas header file merge James Bottomley: o aic94xx: fix TF_TMF_NO_CTX processing o aic94xx: convert to request_firmware interface o aic94xx: fix hotplug/unplug o aic94xx: add link error counts to the expander phys o aic94xx: add transport class phy reset capability o aic94xx: remove local_attached flag o Remove README o Fixup Makefile variable for libsas rename o Rename sas->libsas o aic94xx: correct return code for sas_discover_event o aic94xx: use parent backlink port o aic94xx: remove channel abstraction o aic94xx: fix routing algorithms o aic94xx: add backlink port o aic94xx: fix cascaded expander properties o aic94xx: fix sleep under lock o aic94xx: fix panic on module removal in complex topology o aic94xx: make use of the new sas_port o rename sas_port to asd_sas_port o Fix for eh_strategy_handler move o aic94xx: move entirely over to correct transport class formulation o remove last vestages of sas_rphy_alloc() o update for eh_timed_out move o Preliminary expander support for aic94xx o sas: remove event thread o minor warning cleanups o remove last vestiges of id mapping arrays o Further updates o Convert aic94xx over entirely to the transport class end device and o update aic94xx/sas to use the new sas transport class end device o [PATCH] aic94xx: attaching to the sas transport class o Add missing completion removal from prior patch o [PATCH] aic94xx: attaching to the sas transport class o Build fixes from akpm Jeff Garzik: o [scsi aic94xx] Remove ->owner from PCI info table Luben Tuikov: o initial aic94xx driver Mike Anderson: o aic94xx: fix panic on module insertion o aic94xx: stub out SATA_DEV case o aic94xx: compile warning cleanups o aic94xx: sas_alloc_task o aic94xx: ref count update o aic94xx nexus loss time value o [PATCH] aic94xx: driver assertion in non-x86 BIOS env Randy Dunlap: o libsas: externs not needed Robert Tarte: o aic94xx: sequence patch - fixes SATA support Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-08-29 14:22:51 +00:00
err = asd_process_ctrla_phy_settings(asd_ha, ps);
if (err) {
ASD_DPRINTK("couldn't process ctrla phy settings\n");
goto out2;
}
out2:
kfree(el);
out:
return err;
}
/**
* asd_read_flash - read flash memory
* @asd_ha: pointer to the host adapter structure
*/
int asd_read_flash(struct asd_ha_struct *asd_ha)
{
int err;
struct asd_flash_dir *flash_dir;
err = asd_flash_getid(asd_ha);
if (err)
return err;
flash_dir = kmalloc(sizeof(*flash_dir), GFP_KERNEL);
if (!flash_dir)
return -ENOMEM;
err = -ENOENT;
if (!asd_find_flash_dir(asd_ha, flash_dir)) {
ASD_DPRINTK("couldn't find flash directory\n");
goto out;
}
if (le32_to_cpu(flash_dir->rev) != 2) {
asd_printk("unsupported flash dir version:0x%x\n",
le32_to_cpu(flash_dir->rev));
goto out;
}
err = asd_process_ms(asd_ha, flash_dir);
if (err) {
ASD_DPRINTK("couldn't process manuf sector settings\n");
goto out;
}
err = asd_process_ctrl_a_user(asd_ha, flash_dir);
if (err) {
ASD_DPRINTK("couldn't process CTRL-A user settings\n");
goto out;
}
out:
kfree(flash_dir);
return err;
}
/**
* asd_verify_flash_seg - verify data with flash memory
* @asd_ha: pointer to the host adapter structure
* @src: pointer to the source data to be verified
* @dest_offset: offset from flash memory
* @bytes_to_verify: total bytes to verify
*/
int asd_verify_flash_seg(struct asd_ha_struct *asd_ha,
const void *src, u32 dest_offset, u32 bytes_to_verify)
{
const u8 *src_buf;
u8 flash_char;
int err;
u32 nv_offset, reg, i;
reg = asd_ha->hw_prof.flash.bar;
src_buf = NULL;
err = FLASH_OK;
nv_offset = dest_offset;
src_buf = (const u8 *)src;
for (i = 0; i < bytes_to_verify; i++) {
flash_char = asd_read_reg_byte(asd_ha, reg + nv_offset + i);
if (flash_char != src_buf[i]) {
err = FAIL_VERIFY;
break;
}
}
return err;
}
/**
* asd_write_flash_seg - write data into flash memory
* @asd_ha: pointer to the host adapter structure
* @src: pointer to the source data to be written
* @dest_offset: offset from flash memory
* @bytes_to_write: total bytes to write
*/
int asd_write_flash_seg(struct asd_ha_struct *asd_ha,
const void *src, u32 dest_offset, u32 bytes_to_write)
{
const u8 *src_buf;
u32 nv_offset, reg, i;
int err;
reg = asd_ha->hw_prof.flash.bar;
src_buf = NULL;
err = asd_check_flash_type(asd_ha);
if (err) {
ASD_DPRINTK("couldn't find the type of flash. err=%d\n", err);
return err;
}
nv_offset = dest_offset;
err = asd_erase_nv_sector(asd_ha, nv_offset, bytes_to_write);
if (err) {
ASD_DPRINTK("Erase failed at offset:0x%x\n",
nv_offset);
return err;
}
err = asd_reset_flash(asd_ha);
if (err) {
ASD_DPRINTK("couldn't reset flash. err=%d\n", err);
return err;
}
src_buf = (const u8 *)src;
for (i = 0; i < bytes_to_write; i++) {
/* Setup program command sequence */
switch (asd_ha->hw_prof.flash.method) {
case FLASH_METHOD_A:
{
asd_write_reg_byte(asd_ha,
(reg + 0xAAA), 0xAA);
asd_write_reg_byte(asd_ha,
(reg + 0x555), 0x55);
asd_write_reg_byte(asd_ha,
(reg + 0xAAA), 0xA0);
asd_write_reg_byte(asd_ha,
(reg + nv_offset + i),
(*(src_buf + i)));
break;
}
case FLASH_METHOD_B:
{
asd_write_reg_byte(asd_ha,
(reg + 0x555), 0xAA);
asd_write_reg_byte(asd_ha,
(reg + 0x2AA), 0x55);
asd_write_reg_byte(asd_ha,
(reg + 0x555), 0xA0);
asd_write_reg_byte(asd_ha,
(reg + nv_offset + i),
(*(src_buf + i)));
break;
}
default:
break;
}
if (asd_chk_write_status(asd_ha,
(nv_offset + i), 0) != 0) {
ASD_DPRINTK("aicx: Write failed at offset:0x%x\n",
reg + nv_offset + i);
return FAIL_WRITE_FLASH;
}
}
err = asd_reset_flash(asd_ha);
if (err) {
ASD_DPRINTK("couldn't reset flash. err=%d\n", err);
return err;
}
return 0;
}
int asd_chk_write_status(struct asd_ha_struct *asd_ha,
u32 sector_addr, u8 erase_flag)
{
u32 reg;
u32 loop_cnt;
u8 nv_data1, nv_data2;
u8 toggle_bit1;
/*
* Read from DQ2 requires sector address
* while it's dont care for DQ6
*/
reg = asd_ha->hw_prof.flash.bar;
for (loop_cnt = 0; loop_cnt < 50000; loop_cnt++) {
nv_data1 = asd_read_reg_byte(asd_ha, reg);
nv_data2 = asd_read_reg_byte(asd_ha, reg);
toggle_bit1 = ((nv_data1 & FLASH_STATUS_BIT_MASK_DQ6)
^ (nv_data2 & FLASH_STATUS_BIT_MASK_DQ6));
if (toggle_bit1 == 0) {
return 0;
} else {
if (nv_data2 & FLASH_STATUS_BIT_MASK_DQ5) {
nv_data1 = asd_read_reg_byte(asd_ha,
reg);
nv_data2 = asd_read_reg_byte(asd_ha,
reg);
toggle_bit1 =
((nv_data1 & FLASH_STATUS_BIT_MASK_DQ6)
^ (nv_data2 & FLASH_STATUS_BIT_MASK_DQ6));
if (toggle_bit1 == 0)
return 0;
}
}
/*
* ERASE is a sector-by-sector operation and requires
* more time to finish while WRITE is byte-byte-byte
* operation and takes lesser time to finish.
*
* For some strange reason a reduced ERASE delay gives different
* behaviour across different spirit boards. Hence we set
* a optimum balance of 50mus for ERASE which works well
* across all boards.
*/
if (erase_flag) {
udelay(FLASH_STATUS_ERASE_DELAY_COUNT);
} else {
udelay(FLASH_STATUS_WRITE_DELAY_COUNT);
}
}
return -1;
}
/**
* asd_erase_nv_sector - Erase the flash memory sectors.
* @asd_ha: pointer to the host adapter structure
* @flash_addr: pointer to offset from flash memory
* @size: total bytes to erase.
*/
int asd_erase_nv_sector(struct asd_ha_struct *asd_ha, u32 flash_addr, u32 size)
{
u32 reg;
u32 sector_addr;
reg = asd_ha->hw_prof.flash.bar;
/* sector staring address */
sector_addr = flash_addr & FLASH_SECTOR_SIZE_MASK;
/*
* Erasing an flash sector needs to be done in six consecutive
* write cyles.
*/
while (sector_addr < flash_addr+size) {
switch (asd_ha->hw_prof.flash.method) {
case FLASH_METHOD_A:
asd_write_reg_byte(asd_ha, (reg + 0xAAA), 0xAA);
asd_write_reg_byte(asd_ha, (reg + 0x555), 0x55);
asd_write_reg_byte(asd_ha, (reg + 0xAAA), 0x80);
asd_write_reg_byte(asd_ha, (reg + 0xAAA), 0xAA);
asd_write_reg_byte(asd_ha, (reg + 0x555), 0x55);
asd_write_reg_byte(asd_ha, (reg + sector_addr), 0x30);
break;
case FLASH_METHOD_B:
asd_write_reg_byte(asd_ha, (reg + 0x555), 0xAA);
asd_write_reg_byte(asd_ha, (reg + 0x2AA), 0x55);
asd_write_reg_byte(asd_ha, (reg + 0x555), 0x80);
asd_write_reg_byte(asd_ha, (reg + 0x555), 0xAA);
asd_write_reg_byte(asd_ha, (reg + 0x2AA), 0x55);
asd_write_reg_byte(asd_ha, (reg + sector_addr), 0x30);
break;
default:
break;
}
if (asd_chk_write_status(asd_ha, sector_addr, 1) != 0)
return FAIL_ERASE_FLASH;
sector_addr += FLASH_SECTOR_SIZE;
}
return 0;
}
int asd_check_flash_type(struct asd_ha_struct *asd_ha)
{
u8 manuf_id;
u8 dev_id;
u8 sec_prot;
u32 inc;
u32 reg;
int err;
/* get Flash memory base address */
reg = asd_ha->hw_prof.flash.bar;
/* Determine flash info */
err = asd_reset_flash(asd_ha);
if (err) {
ASD_DPRINTK("couldn't reset flash. err=%d\n", err);
return err;
}
asd_ha->hw_prof.flash.method = FLASH_METHOD_UNKNOWN;
asd_ha->hw_prof.flash.manuf = FLASH_MANUF_ID_UNKNOWN;
asd_ha->hw_prof.flash.dev_id = FLASH_DEV_ID_UNKNOWN;
/* Get flash info. This would most likely be AMD Am29LV family flash.
* First try the sequence for word mode. It is the same as for
* 008B (byte mode only), 160B (word mode) and 800D (word mode).
*/
inc = asd_ha->hw_prof.flash.wide ? 2 : 1;
asd_write_reg_byte(asd_ha, reg + 0xAAA, 0xAA);
asd_write_reg_byte(asd_ha, reg + 0x555, 0x55);
asd_write_reg_byte(asd_ha, reg + 0xAAA, 0x90);
manuf_id = asd_read_reg_byte(asd_ha, reg);
dev_id = asd_read_reg_byte(asd_ha, reg + inc);
sec_prot = asd_read_reg_byte(asd_ha, reg + inc + inc);
/* Get out of autoselect mode. */
err = asd_reset_flash(asd_ha);
if (err) {
ASD_DPRINTK("couldn't reset flash. err=%d\n", err);
return err;
}
ASD_DPRINTK("Flash MethodA manuf_id(0x%x) dev_id(0x%x) "
"sec_prot(0x%x)\n", manuf_id, dev_id, sec_prot);
err = asd_reset_flash(asd_ha);
if (err != 0)
return err;
switch (manuf_id) {
case FLASH_MANUF_ID_AMD:
switch (sec_prot) {
case FLASH_DEV_ID_AM29LV800DT:
case FLASH_DEV_ID_AM29LV640MT:
case FLASH_DEV_ID_AM29F800B:
asd_ha->hw_prof.flash.method = FLASH_METHOD_A;
break;
default:
break;
}
break;
case FLASH_MANUF_ID_ST:
switch (sec_prot) {
case FLASH_DEV_ID_STM29W800DT:
case FLASH_DEV_ID_STM29LV640:
asd_ha->hw_prof.flash.method = FLASH_METHOD_A;
break;
default:
break;
}
break;
case FLASH_MANUF_ID_FUJITSU:
switch (sec_prot) {
case FLASH_DEV_ID_MBM29LV800TE:
case FLASH_DEV_ID_MBM29DL800TA:
asd_ha->hw_prof.flash.method = FLASH_METHOD_A;
break;
}
break;
case FLASH_MANUF_ID_MACRONIX:
switch (sec_prot) {
case FLASH_DEV_ID_MX29LV800BT:
asd_ha->hw_prof.flash.method = FLASH_METHOD_A;
break;
}
break;
}
if (asd_ha->hw_prof.flash.method == FLASH_METHOD_UNKNOWN) {
err = asd_reset_flash(asd_ha);
if (err) {
ASD_DPRINTK("couldn't reset flash. err=%d\n", err);
return err;
}
/* Issue Unlock sequence for AM29LV008BT */
asd_write_reg_byte(asd_ha, (reg + 0x555), 0xAA);
asd_write_reg_byte(asd_ha, (reg + 0x2AA), 0x55);
asd_write_reg_byte(asd_ha, (reg + 0x555), 0x90);
manuf_id = asd_read_reg_byte(asd_ha, reg);
dev_id = asd_read_reg_byte(asd_ha, reg + inc);
sec_prot = asd_read_reg_byte(asd_ha, reg + inc + inc);
ASD_DPRINTK("Flash MethodB manuf_id(0x%x) dev_id(0x%x) sec_prot"
"(0x%x)\n", manuf_id, dev_id, sec_prot);
err = asd_reset_flash(asd_ha);
if (err != 0) {
ASD_DPRINTK("couldn't reset flash. err=%d\n", err);
return err;
}
switch (manuf_id) {
case FLASH_MANUF_ID_AMD:
switch (dev_id) {
case FLASH_DEV_ID_AM29LV008BT:
asd_ha->hw_prof.flash.method = FLASH_METHOD_B;
break;
default:
break;
}
break;
case FLASH_MANUF_ID_ST:
switch (dev_id) {
case FLASH_DEV_ID_STM29008:
asd_ha->hw_prof.flash.method = FLASH_METHOD_B;
break;
default:
break;
}
break;
case FLASH_MANUF_ID_FUJITSU:
switch (dev_id) {
case FLASH_DEV_ID_MBM29LV008TA:
asd_ha->hw_prof.flash.method = FLASH_METHOD_B;
break;
}
break;
case FLASH_MANUF_ID_INTEL:
switch (dev_id) {
case FLASH_DEV_ID_I28LV00TAT:
asd_ha->hw_prof.flash.method = FLASH_METHOD_B;
break;
}
break;
case FLASH_MANUF_ID_MACRONIX:
switch (dev_id) {
case FLASH_DEV_ID_I28LV00TAT:
asd_ha->hw_prof.flash.method = FLASH_METHOD_B;
break;
}
break;
default:
return FAIL_FIND_FLASH_ID;
}
}
if (asd_ha->hw_prof.flash.method == FLASH_METHOD_UNKNOWN)
return FAIL_FIND_FLASH_ID;
asd_ha->hw_prof.flash.manuf = manuf_id;
asd_ha->hw_prof.flash.dev_id = dev_id;
asd_ha->hw_prof.flash.sec_prot = sec_prot;
return 0;
}