2006-01-15 11:05:47 +00:00
|
|
|
/*
|
|
|
|
* Common pmac/prep/chrp pci routines. -- Cort
|
|
|
|
*/
|
|
|
|
|
|
|
|
#include <linux/kernel.h>
|
|
|
|
#include <linux/pci.h>
|
|
|
|
#include <linux/delay.h>
|
|
|
|
#include <linux/string.h>
|
|
|
|
#include <linux/init.h>
|
|
|
|
#include <linux/capability.h>
|
|
|
|
#include <linux/sched.h>
|
|
|
|
#include <linux/errno.h>
|
|
|
|
#include <linux/bootmem.h>
|
[PATCH] powerpc: fix trigger handling in the new irq code
This patch slightly reworks the new irq code to fix a small design error. I
removed the passing of the trigger to the map() calls entirely, it was not a
good idea to have one call do two different things. It also fixes a couple of
corner cases.
Mapping a linux virtual irq to a physical irq now does only that. Setting the
trigger is a different action which has a different call.
The main changes are:
- I no longer call host->ops->map() for an already mapped irq, I just return
the virtual number that was already mapped. It was called before to give an
opportunity to change the trigger, but that was causing issues as that could
happen while the interrupt was in use by a device, and because of the
trigger change, map would potentially muck around with things in a racy way.
That was causing much burden on a given's controller implementation of
map() to get it right. This is much simpler now. map() is only called on
the initial mapping of an irq, meaning that you know that this irq is _not_
being used. You can initialize the hardware if you want (though you don't
have to).
- Controllers that can handle different type of triggers (level/edge/etc...)
now implement the standard irq_chip->set_type() call as defined by the
generic code. That means that you can use the standard set_irq_type() to
configure an irq line manually if you wish or (though I don't like that
interface), pass explicit trigger flags to request_irq() as defined by the
generic kernel interfaces. Also, using those interfaces guarantees that
your controller set_type callback is called with the descriptor lock held,
thus providing locking against activity on the same interrupt (including
mask/unmask/etc...) automatically. A result is that, for example, MPIC's
own map() implementation calls irq_set_type(NONE) to configure the hardware
to the default triggers.
- To allow the above, the irq_map array entry for the new mapped interrupt
is now set before map() callback is called for the controller.
- The irq_create_of_mapping() (also used by irq_of_parse_and_map()) function
for mapping interrupts from the device-tree now also call the separate
set_irq_type(), and only does so if there is a change in the trigger type.
- While I was at it, I changed pci_read_irq_line() (which is the helper I
would expect most archs to use in their pcibios_fixup() to get the PCI
interrupt routing from the device tree) to also handle a fallback when the
DT mapping fails consisting of reading the PCI_INTERRUPT_PIN to know wether
the device has an interrupt at all, and the the PCI_INTERRUPT_LINE to get an
interrupt number from the device. That number is then mapped using the
default controller, and the trigger is set to level low. That default
behaviour works for several platforms that don't have a proper interrupt
tree like Pegasos. If it doesn't work for your platform, then either
provide a proper interrupt tree from the firmware so that fallback isn't
needed, or don't call pci_read_irq_line()
- Add back a bit that got dropped by my main rework patch for properly
clearing pending IPIs on pSeries when using a kexec
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-10 11:44:42 +00:00
|
|
|
#include <linux/irq.h>
|
2006-11-11 06:24:51 +00:00
|
|
|
#include <linux/list.h>
|
2006-01-15 11:05:47 +00:00
|
|
|
|
|
|
|
#include <asm/processor.h>
|
|
|
|
#include <asm/io.h>
|
|
|
|
#include <asm/prom.h>
|
|
|
|
#include <asm/sections.h>
|
|
|
|
#include <asm/pci-bridge.h>
|
|
|
|
#include <asm/byteorder.h>
|
|
|
|
#include <asm/uaccess.h>
|
|
|
|
#include <asm/machdep.h>
|
|
|
|
|
|
|
|
#undef DEBUG
|
|
|
|
|
|
|
|
#ifdef DEBUG
|
|
|
|
#define DBG(x...) printk(x)
|
|
|
|
#else
|
|
|
|
#define DBG(x...)
|
|
|
|
#endif
|
|
|
|
|
|
|
|
unsigned long isa_io_base = 0;
|
|
|
|
unsigned long isa_mem_base = 0;
|
|
|
|
unsigned long pci_dram_offset = 0;
|
|
|
|
int pcibios_assign_bus_offset = 1;
|
|
|
|
|
|
|
|
void pcibios_make_OF_bus_map(void);
|
|
|
|
|
|
|
|
static int pci_relocate_bridge_resource(struct pci_bus *bus, int i);
|
|
|
|
static int probe_resource(struct pci_bus *parent, struct resource *pr,
|
|
|
|
struct resource *res, struct resource **conflict);
|
|
|
|
static void update_bridge_base(struct pci_bus *bus, int i);
|
|
|
|
static void pcibios_fixup_resources(struct pci_dev* dev);
|
|
|
|
static void fixup_broken_pcnet32(struct pci_dev* dev);
|
|
|
|
static int reparent_resources(struct resource *parent, struct resource *res);
|
|
|
|
static void fixup_cpc710_pci64(struct pci_dev* dev);
|
|
|
|
#ifdef CONFIG_PPC_OF
|
|
|
|
static u8* pci_to_OF_bus_map;
|
|
|
|
#endif
|
|
|
|
|
|
|
|
/* By default, we don't re-assign bus numbers. We do this only on
|
|
|
|
* some pmacs
|
|
|
|
*/
|
|
|
|
int pci_assign_all_buses;
|
|
|
|
|
|
|
|
struct pci_controller* hose_head;
|
|
|
|
struct pci_controller** hose_tail = &hose_head;
|
|
|
|
|
|
|
|
static int pci_bus_count;
|
|
|
|
|
|
|
|
static void
|
|
|
|
fixup_broken_pcnet32(struct pci_dev* dev)
|
|
|
|
{
|
|
|
|
if ((dev->class>>8 == PCI_CLASS_NETWORK_ETHERNET)) {
|
|
|
|
dev->vendor = PCI_VENDOR_ID_AMD;
|
|
|
|
pci_write_config_word(dev, PCI_VENDOR_ID, PCI_VENDOR_ID_AMD);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_TRIDENT, PCI_ANY_ID, fixup_broken_pcnet32);
|
|
|
|
|
|
|
|
static void
|
|
|
|
fixup_cpc710_pci64(struct pci_dev* dev)
|
|
|
|
{
|
|
|
|
/* Hide the PCI64 BARs from the kernel as their content doesn't
|
|
|
|
* fit well in the resource management
|
|
|
|
*/
|
|
|
|
dev->resource[0].start = dev->resource[0].end = 0;
|
|
|
|
dev->resource[0].flags = 0;
|
|
|
|
dev->resource[1].start = dev->resource[1].end = 0;
|
|
|
|
dev->resource[1].flags = 0;
|
|
|
|
}
|
|
|
|
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_CPC710_PCI64, fixup_cpc710_pci64);
|
|
|
|
|
|
|
|
static void
|
|
|
|
pcibios_fixup_resources(struct pci_dev *dev)
|
|
|
|
{
|
|
|
|
struct pci_controller* hose = (struct pci_controller *)dev->sysdata;
|
|
|
|
int i;
|
|
|
|
unsigned long offset;
|
|
|
|
|
|
|
|
if (!hose) {
|
|
|
|
printk(KERN_ERR "No hose for PCI dev %s!\n", pci_name(dev));
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) {
|
|
|
|
struct resource *res = dev->resource + i;
|
|
|
|
if (!res->flags)
|
|
|
|
continue;
|
|
|
|
if (res->end == 0xffffffff) {
|
2006-06-12 22:18:31 +00:00
|
|
|
DBG("PCI:%s Resource %d [%016llx-%016llx] is unassigned\n",
|
2006-12-03 17:52:27 +00:00
|
|
|
pci_name(dev), i, (u64)res->start, (u64)res->end);
|
2006-01-15 11:05:47 +00:00
|
|
|
res->end -= res->start;
|
|
|
|
res->start = 0;
|
|
|
|
res->flags |= IORESOURCE_UNSET;
|
|
|
|
continue;
|
|
|
|
}
|
|
|
|
offset = 0;
|
|
|
|
if (res->flags & IORESOURCE_MEM) {
|
|
|
|
offset = hose->pci_mem_offset;
|
|
|
|
} else if (res->flags & IORESOURCE_IO) {
|
|
|
|
offset = (unsigned long) hose->io_base_virt
|
|
|
|
- isa_io_base;
|
|
|
|
}
|
|
|
|
if (offset != 0) {
|
|
|
|
res->start += offset;
|
|
|
|
res->end += offset;
|
2006-12-03 17:52:27 +00:00
|
|
|
DBG("Fixup res %d (%lx) of dev %s: %llx -> %llx\n",
|
|
|
|
i, res->flags, pci_name(dev),
|
|
|
|
(u64)res->start - offset, (u64)res->start);
|
2006-01-15 11:05:47 +00:00
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Call machine specific resource fixup */
|
|
|
|
if (ppc_md.pcibios_fixup_resources)
|
|
|
|
ppc_md.pcibios_fixup_resources(dev);
|
|
|
|
}
|
|
|
|
DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, pcibios_fixup_resources);
|
|
|
|
|
|
|
|
void pcibios_resource_to_bus(struct pci_dev *dev, struct pci_bus_region *region,
|
|
|
|
struct resource *res)
|
|
|
|
{
|
|
|
|
unsigned long offset = 0;
|
|
|
|
struct pci_controller *hose = dev->sysdata;
|
|
|
|
|
|
|
|
if (hose && res->flags & IORESOURCE_IO)
|
|
|
|
offset = (unsigned long)hose->io_base_virt - isa_io_base;
|
|
|
|
else if (hose && res->flags & IORESOURCE_MEM)
|
|
|
|
offset = hose->pci_mem_offset;
|
|
|
|
region->start = res->start - offset;
|
|
|
|
region->end = res->end - offset;
|
|
|
|
}
|
|
|
|
EXPORT_SYMBOL(pcibios_resource_to_bus);
|
|
|
|
|
|
|
|
void pcibios_bus_to_resource(struct pci_dev *dev, struct resource *res,
|
|
|
|
struct pci_bus_region *region)
|
|
|
|
{
|
|
|
|
unsigned long offset = 0;
|
|
|
|
struct pci_controller *hose = dev->sysdata;
|
|
|
|
|
|
|
|
if (hose && res->flags & IORESOURCE_IO)
|
|
|
|
offset = (unsigned long)hose->io_base_virt - isa_io_base;
|
|
|
|
else if (hose && res->flags & IORESOURCE_MEM)
|
|
|
|
offset = hose->pci_mem_offset;
|
|
|
|
res->start = region->start + offset;
|
|
|
|
res->end = region->end + offset;
|
|
|
|
}
|
|
|
|
EXPORT_SYMBOL(pcibios_bus_to_resource);
|
|
|
|
|
|
|
|
/*
|
|
|
|
* We need to avoid collisions with `mirrored' VGA ports
|
|
|
|
* and other strange ISA hardware, so we always want the
|
|
|
|
* addresses to be allocated in the 0x000-0x0ff region
|
|
|
|
* modulo 0x400.
|
|
|
|
*
|
|
|
|
* Why? Because some silly external IO cards only decode
|
|
|
|
* the low 10 bits of the IO address. The 0x00-0xff region
|
|
|
|
* is reserved for motherboard devices that decode all 16
|
|
|
|
* bits, so it's ok to allocate at, say, 0x2800-0x28ff,
|
|
|
|
* but we want to try to avoid allocating at 0x2900-0x2bff
|
|
|
|
* which might have be mirrored at 0x0100-0x03ff..
|
|
|
|
*/
|
2006-06-13 00:06:02 +00:00
|
|
|
void pcibios_align_resource(void *data, struct resource *res,
|
|
|
|
resource_size_t size, resource_size_t align)
|
2006-01-15 11:05:47 +00:00
|
|
|
{
|
|
|
|
struct pci_dev *dev = data;
|
|
|
|
|
|
|
|
if (res->flags & IORESOURCE_IO) {
|
2006-06-13 00:06:02 +00:00
|
|
|
resource_size_t start = res->start;
|
2006-01-15 11:05:47 +00:00
|
|
|
|
|
|
|
if (size > 0x100) {
|
|
|
|
printk(KERN_ERR "PCI: I/O Region %s/%d too large"
|
2006-06-12 22:18:31 +00:00
|
|
|
" (%lld bytes)\n", pci_name(dev),
|
2006-06-13 00:06:02 +00:00
|
|
|
dev->resource - res, (unsigned long long)size);
|
2006-01-15 11:05:47 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
if (start & 0x300) {
|
|
|
|
start = (start + 0x3ff) & ~0x3ff;
|
|
|
|
res->start = start;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
}
|
|
|
|
EXPORT_SYMBOL(pcibios_align_resource);
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Handle resources of PCI devices. If the world were perfect, we could
|
|
|
|
* just allocate all the resource regions and do nothing more. It isn't.
|
|
|
|
* On the other hand, we cannot just re-allocate all devices, as it would
|
|
|
|
* require us to know lots of host bridge internals. So we attempt to
|
|
|
|
* keep as much of the original configuration as possible, but tweak it
|
|
|
|
* when it's found to be wrong.
|
|
|
|
*
|
|
|
|
* Known BIOS problems we have to work around:
|
|
|
|
* - I/O or memory regions not configured
|
|
|
|
* - regions configured, but not enabled in the command register
|
|
|
|
* - bogus I/O addresses above 64K used
|
|
|
|
* - expansion ROMs left enabled (this may sound harmless, but given
|
|
|
|
* the fact the PCI specs explicitly allow address decoders to be
|
|
|
|
* shared between expansion ROMs and other resource regions, it's
|
|
|
|
* at least dangerous)
|
|
|
|
*
|
|
|
|
* Our solution:
|
|
|
|
* (1) Allocate resources for all buses behind PCI-to-PCI bridges.
|
|
|
|
* This gives us fixed barriers on where we can allocate.
|
|
|
|
* (2) Allocate resources for all enabled devices. If there is
|
|
|
|
* a collision, just mark the resource as unallocated. Also
|
|
|
|
* disable expansion ROMs during this step.
|
|
|
|
* (3) Try to allocate resources for disabled devices. If the
|
|
|
|
* resources were assigned correctly, everything goes well,
|
|
|
|
* if they weren't, they won't disturb allocation of other
|
|
|
|
* resources.
|
|
|
|
* (4) Assign new addresses to resources which were either
|
|
|
|
* not configured at all or misconfigured. If explicitly
|
|
|
|
* requested by the user, configure expansion ROM address
|
|
|
|
* as well.
|
|
|
|
*/
|
|
|
|
|
|
|
|
static void __init
|
|
|
|
pcibios_allocate_bus_resources(struct list_head *bus_list)
|
|
|
|
{
|
|
|
|
struct pci_bus *bus;
|
|
|
|
int i;
|
|
|
|
struct resource *res, *pr;
|
|
|
|
|
|
|
|
/* Depth-First Search on bus tree */
|
|
|
|
list_for_each_entry(bus, bus_list, node) {
|
|
|
|
for (i = 0; i < 4; ++i) {
|
|
|
|
if ((res = bus->resource[i]) == NULL || !res->flags
|
|
|
|
|| res->start > res->end)
|
|
|
|
continue;
|
|
|
|
if (bus->parent == NULL)
|
|
|
|
pr = (res->flags & IORESOURCE_IO)?
|
|
|
|
&ioport_resource: &iomem_resource;
|
|
|
|
else {
|
|
|
|
pr = pci_find_parent_resource(bus->self, res);
|
|
|
|
if (pr == res) {
|
|
|
|
/* this happens when the generic PCI
|
|
|
|
* code (wrongly) decides that this
|
|
|
|
* bridge is transparent -- paulus
|
|
|
|
*/
|
|
|
|
continue;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2006-06-12 22:18:31 +00:00
|
|
|
DBG("PCI: bridge rsrc %llx..%llx (%lx), parent %p\n",
|
2006-12-03 17:52:27 +00:00
|
|
|
(u64)res->start, (u64)res->end, res->flags, pr);
|
2006-01-15 11:05:47 +00:00
|
|
|
if (pr) {
|
|
|
|
if (request_resource(pr, res) == 0)
|
|
|
|
continue;
|
|
|
|
/*
|
|
|
|
* Must be a conflict with an existing entry.
|
|
|
|
* Move that entry (or entries) under the
|
|
|
|
* bridge resource and try again.
|
|
|
|
*/
|
|
|
|
if (reparent_resources(pr, res) == 0)
|
|
|
|
continue;
|
|
|
|
}
|
|
|
|
printk(KERN_ERR "PCI: Cannot allocate resource region "
|
|
|
|
"%d of PCI bridge %d\n", i, bus->number);
|
|
|
|
if (pci_relocate_bridge_resource(bus, i))
|
|
|
|
bus->resource[i] = NULL;
|
|
|
|
}
|
|
|
|
pcibios_allocate_bus_resources(&bus->children);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Reparent resource children of pr that conflict with res
|
|
|
|
* under res, and make res replace those children.
|
|
|
|
*/
|
|
|
|
static int __init
|
|
|
|
reparent_resources(struct resource *parent, struct resource *res)
|
|
|
|
{
|
|
|
|
struct resource *p, **pp;
|
|
|
|
struct resource **firstpp = NULL;
|
|
|
|
|
|
|
|
for (pp = &parent->child; (p = *pp) != NULL; pp = &p->sibling) {
|
|
|
|
if (p->end < res->start)
|
|
|
|
continue;
|
|
|
|
if (res->end < p->start)
|
|
|
|
break;
|
|
|
|
if (p->start < res->start || p->end > res->end)
|
|
|
|
return -1; /* not completely contained */
|
|
|
|
if (firstpp == NULL)
|
|
|
|
firstpp = pp;
|
|
|
|
}
|
|
|
|
if (firstpp == NULL)
|
|
|
|
return -1; /* didn't find any conflicting entries? */
|
|
|
|
res->parent = parent;
|
|
|
|
res->child = *firstpp;
|
|
|
|
res->sibling = *pp;
|
|
|
|
*firstpp = res;
|
|
|
|
*pp = NULL;
|
|
|
|
for (p = res->child; p != NULL; p = p->sibling) {
|
|
|
|
p->parent = res;
|
2006-06-12 22:18:31 +00:00
|
|
|
DBG(KERN_INFO "PCI: reparented %s [%llx..%llx] under %s\n",
|
2006-12-03 17:52:27 +00:00
|
|
|
p->name, (u64)p->start, (u64)p->end, res->name);
|
2006-01-15 11:05:47 +00:00
|
|
|
}
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* A bridge has been allocated a range which is outside the range
|
|
|
|
* of its parent bridge, so it needs to be moved.
|
|
|
|
*/
|
|
|
|
static int __init
|
|
|
|
pci_relocate_bridge_resource(struct pci_bus *bus, int i)
|
|
|
|
{
|
|
|
|
struct resource *res, *pr, *conflict;
|
|
|
|
unsigned long try, size;
|
|
|
|
int j;
|
|
|
|
struct pci_bus *parent = bus->parent;
|
|
|
|
|
|
|
|
if (parent == NULL) {
|
|
|
|
/* shouldn't ever happen */
|
|
|
|
printk(KERN_ERR "PCI: can't move host bridge resource\n");
|
|
|
|
return -1;
|
|
|
|
}
|
|
|
|
res = bus->resource[i];
|
|
|
|
if (res == NULL)
|
|
|
|
return -1;
|
|
|
|
pr = NULL;
|
|
|
|
for (j = 0; j < 4; j++) {
|
|
|
|
struct resource *r = parent->resource[j];
|
|
|
|
if (!r)
|
|
|
|
continue;
|
|
|
|
if ((res->flags ^ r->flags) & (IORESOURCE_IO | IORESOURCE_MEM))
|
|
|
|
continue;
|
|
|
|
if (!((res->flags ^ r->flags) & IORESOURCE_PREFETCH)) {
|
|
|
|
pr = r;
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
if (res->flags & IORESOURCE_PREFETCH)
|
|
|
|
pr = r;
|
|
|
|
}
|
|
|
|
if (pr == NULL)
|
|
|
|
return -1;
|
|
|
|
size = res->end - res->start;
|
|
|
|
if (pr->start > pr->end || size > pr->end - pr->start)
|
|
|
|
return -1;
|
|
|
|
try = pr->end;
|
|
|
|
for (;;) {
|
|
|
|
res->start = try - size;
|
|
|
|
res->end = try;
|
|
|
|
if (probe_resource(bus->parent, pr, res, &conflict) == 0)
|
|
|
|
break;
|
|
|
|
if (conflict->start <= pr->start + size)
|
|
|
|
return -1;
|
|
|
|
try = conflict->start - 1;
|
|
|
|
}
|
|
|
|
if (request_resource(pr, res)) {
|
2006-06-12 22:18:31 +00:00
|
|
|
DBG(KERN_ERR "PCI: huh? couldn't move to %llx..%llx\n",
|
2006-12-03 17:52:27 +00:00
|
|
|
(u64)res->start, (u64)res->end);
|
2006-01-15 11:05:47 +00:00
|
|
|
return -1; /* "can't happen" */
|
|
|
|
}
|
|
|
|
update_bridge_base(bus, i);
|
2006-06-12 22:18:31 +00:00
|
|
|
printk(KERN_INFO "PCI: bridge %d resource %d moved to %llx..%llx\n",
|
|
|
|
bus->number, i, (unsigned long long)res->start,
|
|
|
|
(unsigned long long)res->end);
|
2006-01-15 11:05:47 +00:00
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int __init
|
|
|
|
probe_resource(struct pci_bus *parent, struct resource *pr,
|
|
|
|
struct resource *res, struct resource **conflict)
|
|
|
|
{
|
|
|
|
struct pci_bus *bus;
|
|
|
|
struct pci_dev *dev;
|
|
|
|
struct resource *r;
|
|
|
|
int i;
|
|
|
|
|
|
|
|
for (r = pr->child; r != NULL; r = r->sibling) {
|
|
|
|
if (r->end >= res->start && res->end >= r->start) {
|
|
|
|
*conflict = r;
|
|
|
|
return 1;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
list_for_each_entry(bus, &parent->children, node) {
|
|
|
|
for (i = 0; i < 4; ++i) {
|
|
|
|
if ((r = bus->resource[i]) == NULL)
|
|
|
|
continue;
|
|
|
|
if (!r->flags || r->start > r->end || r == res)
|
|
|
|
continue;
|
|
|
|
if (pci_find_parent_resource(bus->self, r) != pr)
|
|
|
|
continue;
|
|
|
|
if (r->end >= res->start && res->end >= r->start) {
|
|
|
|
*conflict = r;
|
|
|
|
return 1;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
}
|
|
|
|
list_for_each_entry(dev, &parent->devices, bus_list) {
|
|
|
|
for (i = 0; i < 6; ++i) {
|
|
|
|
r = &dev->resource[i];
|
|
|
|
if (!r->flags || (r->flags & IORESOURCE_UNSET))
|
|
|
|
continue;
|
|
|
|
if (pci_find_parent_resource(dev, r) != pr)
|
|
|
|
continue;
|
|
|
|
if (r->end >= res->start && res->end >= r->start) {
|
|
|
|
*conflict = r;
|
|
|
|
return 1;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
}
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void __init
|
|
|
|
update_bridge_base(struct pci_bus *bus, int i)
|
|
|
|
{
|
|
|
|
struct resource *res = bus->resource[i];
|
|
|
|
u8 io_base_lo, io_limit_lo;
|
|
|
|
u16 mem_base, mem_limit;
|
|
|
|
u16 cmd;
|
|
|
|
unsigned long start, end, off;
|
|
|
|
struct pci_dev *dev = bus->self;
|
|
|
|
struct pci_controller *hose = dev->sysdata;
|
|
|
|
|
|
|
|
if (!hose) {
|
|
|
|
printk("update_bridge_base: no hose?\n");
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
pci_read_config_word(dev, PCI_COMMAND, &cmd);
|
|
|
|
pci_write_config_word(dev, PCI_COMMAND,
|
|
|
|
cmd & ~(PCI_COMMAND_IO | PCI_COMMAND_MEMORY));
|
|
|
|
if (res->flags & IORESOURCE_IO) {
|
|
|
|
off = (unsigned long) hose->io_base_virt - isa_io_base;
|
|
|
|
start = res->start - off;
|
|
|
|
end = res->end - off;
|
|
|
|
io_base_lo = (start >> 8) & PCI_IO_RANGE_MASK;
|
|
|
|
io_limit_lo = (end >> 8) & PCI_IO_RANGE_MASK;
|
2006-10-12 20:36:23 +00:00
|
|
|
if (end > 0xffff)
|
2006-01-15 11:05:47 +00:00
|
|
|
io_base_lo |= PCI_IO_RANGE_TYPE_32;
|
2006-10-12 20:36:23 +00:00
|
|
|
else
|
2006-01-15 11:05:47 +00:00
|
|
|
io_base_lo |= PCI_IO_RANGE_TYPE_16;
|
2006-10-12 20:36:23 +00:00
|
|
|
pci_write_config_word(dev, PCI_IO_BASE_UPPER16,
|
|
|
|
start >> 16);
|
|
|
|
pci_write_config_word(dev, PCI_IO_LIMIT_UPPER16,
|
|
|
|
end >> 16);
|
2006-01-15 11:05:47 +00:00
|
|
|
pci_write_config_byte(dev, PCI_IO_BASE, io_base_lo);
|
|
|
|
pci_write_config_byte(dev, PCI_IO_LIMIT, io_limit_lo);
|
|
|
|
|
|
|
|
} else if ((res->flags & (IORESOURCE_MEM | IORESOURCE_PREFETCH))
|
|
|
|
== IORESOURCE_MEM) {
|
|
|
|
off = hose->pci_mem_offset;
|
|
|
|
mem_base = ((res->start - off) >> 16) & PCI_MEMORY_RANGE_MASK;
|
|
|
|
mem_limit = ((res->end - off) >> 16) & PCI_MEMORY_RANGE_MASK;
|
|
|
|
pci_write_config_word(dev, PCI_MEMORY_BASE, mem_base);
|
|
|
|
pci_write_config_word(dev, PCI_MEMORY_LIMIT, mem_limit);
|
|
|
|
|
|
|
|
} else if ((res->flags & (IORESOURCE_MEM | IORESOURCE_PREFETCH))
|
|
|
|
== (IORESOURCE_MEM | IORESOURCE_PREFETCH)) {
|
|
|
|
off = hose->pci_mem_offset;
|
|
|
|
mem_base = ((res->start - off) >> 16) & PCI_PREF_RANGE_MASK;
|
|
|
|
mem_limit = ((res->end - off) >> 16) & PCI_PREF_RANGE_MASK;
|
|
|
|
pci_write_config_word(dev, PCI_PREF_MEMORY_BASE, mem_base);
|
|
|
|
pci_write_config_word(dev, PCI_PREF_MEMORY_LIMIT, mem_limit);
|
|
|
|
|
|
|
|
} else {
|
|
|
|
DBG(KERN_ERR "PCI: ugh, bridge %s res %d has flags=%lx\n",
|
|
|
|
pci_name(dev), i, res->flags);
|
|
|
|
}
|
|
|
|
pci_write_config_word(dev, PCI_COMMAND, cmd);
|
|
|
|
}
|
|
|
|
|
|
|
|
static inline void alloc_resource(struct pci_dev *dev, int idx)
|
|
|
|
{
|
|
|
|
struct resource *pr, *r = &dev->resource[idx];
|
|
|
|
|
2006-06-12 22:18:31 +00:00
|
|
|
DBG("PCI:%s: Resource %d: %016llx-%016llx (f=%lx)\n",
|
2006-12-03 17:52:27 +00:00
|
|
|
pci_name(dev), idx, (u64)r->start, (u64)r->end, r->flags);
|
2006-01-15 11:05:47 +00:00
|
|
|
pr = pci_find_parent_resource(dev, r);
|
|
|
|
if (!pr || request_resource(pr, r) < 0) {
|
|
|
|
printk(KERN_ERR "PCI: Cannot allocate resource region %d"
|
|
|
|
" of device %s\n", idx, pci_name(dev));
|
|
|
|
if (pr)
|
2006-06-12 22:18:31 +00:00
|
|
|
DBG("PCI: parent is %p: %016llx-%016llx (f=%lx)\n",
|
2006-12-03 17:52:27 +00:00
|
|
|
pr, (u64)pr->start, (u64)pr->end, pr->flags);
|
2006-01-15 11:05:47 +00:00
|
|
|
/* We'll assign a new address later */
|
|
|
|
r->flags |= IORESOURCE_UNSET;
|
|
|
|
r->end -= r->start;
|
|
|
|
r->start = 0;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
static void __init
|
|
|
|
pcibios_allocate_resources(int pass)
|
|
|
|
{
|
|
|
|
struct pci_dev *dev = NULL;
|
|
|
|
int idx, disabled;
|
|
|
|
u16 command;
|
|
|
|
struct resource *r;
|
|
|
|
|
|
|
|
for_each_pci_dev(dev) {
|
|
|
|
pci_read_config_word(dev, PCI_COMMAND, &command);
|
|
|
|
for (idx = 0; idx < 6; idx++) {
|
|
|
|
r = &dev->resource[idx];
|
|
|
|
if (r->parent) /* Already allocated */
|
|
|
|
continue;
|
|
|
|
if (!r->flags || (r->flags & IORESOURCE_UNSET))
|
|
|
|
continue; /* Not assigned at all */
|
|
|
|
if (r->flags & IORESOURCE_IO)
|
|
|
|
disabled = !(command & PCI_COMMAND_IO);
|
|
|
|
else
|
|
|
|
disabled = !(command & PCI_COMMAND_MEMORY);
|
|
|
|
if (pass == disabled)
|
|
|
|
alloc_resource(dev, idx);
|
|
|
|
}
|
|
|
|
if (pass)
|
|
|
|
continue;
|
|
|
|
r = &dev->resource[PCI_ROM_RESOURCE];
|
|
|
|
if (r->flags & IORESOURCE_ROM_ENABLE) {
|
|
|
|
/* Turn the ROM off, leave the resource region, but keep it unregistered. */
|
|
|
|
u32 reg;
|
|
|
|
DBG("PCI: Switching off ROM of %s\n", pci_name(dev));
|
|
|
|
r->flags &= ~IORESOURCE_ROM_ENABLE;
|
|
|
|
pci_read_config_dword(dev, dev->rom_base_reg, ®);
|
|
|
|
pci_write_config_dword(dev, dev->rom_base_reg,
|
|
|
|
reg & ~PCI_ROM_ADDRESS_ENABLE);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
static void __init
|
|
|
|
pcibios_assign_resources(void)
|
|
|
|
{
|
|
|
|
struct pci_dev *dev = NULL;
|
|
|
|
int idx;
|
|
|
|
struct resource *r;
|
|
|
|
|
|
|
|
for_each_pci_dev(dev) {
|
|
|
|
int class = dev->class >> 8;
|
|
|
|
|
|
|
|
/* Don't touch classless devices and host bridges */
|
|
|
|
if (!class || class == PCI_CLASS_BRIDGE_HOST)
|
|
|
|
continue;
|
|
|
|
|
|
|
|
for (idx = 0; idx < 6; idx++) {
|
|
|
|
r = &dev->resource[idx];
|
|
|
|
|
|
|
|
/*
|
|
|
|
* We shall assign a new address to this resource,
|
|
|
|
* either because the BIOS (sic) forgot to do so
|
|
|
|
* or because we have decided the old address was
|
|
|
|
* unusable for some reason.
|
|
|
|
*/
|
|
|
|
if ((r->flags & IORESOURCE_UNSET) && r->end &&
|
|
|
|
(!ppc_md.pcibios_enable_device_hook ||
|
|
|
|
!ppc_md.pcibios_enable_device_hook(dev, 1))) {
|
|
|
|
r->flags &= ~IORESOURCE_UNSET;
|
|
|
|
pci_assign_resource(dev, idx);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
#if 0 /* don't assign ROMs */
|
|
|
|
r = &dev->resource[PCI_ROM_RESOURCE];
|
|
|
|
r->end -= r->start;
|
|
|
|
r->start = 0;
|
|
|
|
if (r->end)
|
|
|
|
pci_assign_resource(dev, PCI_ROM_RESOURCE);
|
|
|
|
#endif
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
int
|
|
|
|
pcibios_enable_resources(struct pci_dev *dev, int mask)
|
|
|
|
{
|
|
|
|
u16 cmd, old_cmd;
|
|
|
|
int idx;
|
|
|
|
struct resource *r;
|
|
|
|
|
|
|
|
pci_read_config_word(dev, PCI_COMMAND, &cmd);
|
|
|
|
old_cmd = cmd;
|
|
|
|
for (idx=0; idx<6; idx++) {
|
|
|
|
/* Only set up the requested stuff */
|
|
|
|
if (!(mask & (1<<idx)))
|
|
|
|
continue;
|
|
|
|
|
|
|
|
r = &dev->resource[idx];
|
|
|
|
if (r->flags & IORESOURCE_UNSET) {
|
|
|
|
printk(KERN_ERR "PCI: Device %s not available because of resource collisions\n", pci_name(dev));
|
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
if (r->flags & IORESOURCE_IO)
|
|
|
|
cmd |= PCI_COMMAND_IO;
|
|
|
|
if (r->flags & IORESOURCE_MEM)
|
|
|
|
cmd |= PCI_COMMAND_MEMORY;
|
|
|
|
}
|
|
|
|
if (dev->resource[PCI_ROM_RESOURCE].start)
|
|
|
|
cmd |= PCI_COMMAND_MEMORY;
|
|
|
|
if (cmd != old_cmd) {
|
|
|
|
printk("PCI: Enabling device %s (%04x -> %04x)\n", pci_name(dev), old_cmd, cmd);
|
|
|
|
pci_write_config_word(dev, PCI_COMMAND, cmd);
|
|
|
|
}
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int next_controller_index;
|
|
|
|
|
|
|
|
struct pci_controller * __init
|
|
|
|
pcibios_alloc_controller(void)
|
|
|
|
{
|
|
|
|
struct pci_controller *hose;
|
|
|
|
|
|
|
|
hose = (struct pci_controller *)alloc_bootmem(sizeof(*hose));
|
|
|
|
memset(hose, 0, sizeof(struct pci_controller));
|
|
|
|
|
|
|
|
*hose_tail = hose;
|
|
|
|
hose_tail = &hose->next;
|
|
|
|
|
|
|
|
hose->index = next_controller_index++;
|
|
|
|
|
|
|
|
return hose;
|
|
|
|
}
|
|
|
|
|
|
|
|
#ifdef CONFIG_PPC_OF
|
|
|
|
/*
|
|
|
|
* Functions below are used on OpenFirmware machines.
|
|
|
|
*/
|
|
|
|
static void
|
|
|
|
make_one_node_map(struct device_node* node, u8 pci_bus)
|
|
|
|
{
|
2006-07-12 05:35:54 +00:00
|
|
|
const int *bus_range;
|
2006-01-15 11:05:47 +00:00
|
|
|
int len;
|
|
|
|
|
|
|
|
if (pci_bus >= pci_bus_count)
|
|
|
|
return;
|
2007-04-03 12:26:41 +00:00
|
|
|
bus_range = of_get_property(node, "bus-range", &len);
|
2006-01-15 11:05:47 +00:00
|
|
|
if (bus_range == NULL || len < 2 * sizeof(int)) {
|
|
|
|
printk(KERN_WARNING "Can't get bus-range for %s, "
|
|
|
|
"assuming it starts at 0\n", node->full_name);
|
|
|
|
pci_to_OF_bus_map[pci_bus] = 0;
|
|
|
|
} else
|
|
|
|
pci_to_OF_bus_map[pci_bus] = bus_range[0];
|
|
|
|
|
|
|
|
for (node=node->child; node != 0;node = node->sibling) {
|
|
|
|
struct pci_dev* dev;
|
2006-07-12 05:35:54 +00:00
|
|
|
const unsigned int *class_code, *reg;
|
2006-01-15 11:05:47 +00:00
|
|
|
|
2007-04-03 12:26:41 +00:00
|
|
|
class_code = of_get_property(node, "class-code", NULL);
|
2006-01-15 11:05:47 +00:00
|
|
|
if (!class_code || ((*class_code >> 8) != PCI_CLASS_BRIDGE_PCI &&
|
|
|
|
(*class_code >> 8) != PCI_CLASS_BRIDGE_CARDBUS))
|
|
|
|
continue;
|
2007-04-03 12:26:41 +00:00
|
|
|
reg = of_get_property(node, "reg", NULL);
|
2006-01-15 11:05:47 +00:00
|
|
|
if (!reg)
|
|
|
|
continue;
|
2007-04-23 13:47:59 +00:00
|
|
|
dev = pci_get_bus_and_slot(pci_bus, ((reg[0] >> 8) & 0xff));
|
|
|
|
if (!dev || !dev->subordinate) {
|
|
|
|
pci_dev_put(dev);
|
2006-01-15 11:05:47 +00:00
|
|
|
continue;
|
2007-04-23 13:47:59 +00:00
|
|
|
}
|
2006-01-15 11:05:47 +00:00
|
|
|
make_one_node_map(node, dev->subordinate->number);
|
2007-04-23 13:47:59 +00:00
|
|
|
pci_dev_put(dev);
|
2006-01-15 11:05:47 +00:00
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
void
|
|
|
|
pcibios_make_OF_bus_map(void)
|
|
|
|
{
|
|
|
|
int i;
|
|
|
|
struct pci_controller* hose;
|
2006-07-12 05:35:54 +00:00
|
|
|
struct property *map_prop;
|
2007-04-24 03:50:55 +00:00
|
|
|
struct device_node *dn;
|
2006-01-15 11:05:47 +00:00
|
|
|
|
2006-12-13 08:35:56 +00:00
|
|
|
pci_to_OF_bus_map = kmalloc(pci_bus_count, GFP_KERNEL);
|
2006-01-15 11:05:47 +00:00
|
|
|
if (!pci_to_OF_bus_map) {
|
|
|
|
printk(KERN_ERR "Can't allocate OF bus map !\n");
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* We fill the bus map with invalid values, that helps
|
|
|
|
* debugging.
|
|
|
|
*/
|
|
|
|
for (i=0; i<pci_bus_count; i++)
|
|
|
|
pci_to_OF_bus_map[i] = 0xff;
|
|
|
|
|
|
|
|
/* For each hose, we begin searching bridges */
|
|
|
|
for(hose=hose_head; hose; hose=hose->next) {
|
|
|
|
struct device_node* node;
|
|
|
|
node = (struct device_node *)hose->arch_data;
|
|
|
|
if (!node)
|
|
|
|
continue;
|
|
|
|
make_one_node_map(node, hose->first_busno);
|
|
|
|
}
|
2007-04-24 03:50:55 +00:00
|
|
|
dn = of_find_node_by_path("/");
|
|
|
|
map_prop = of_find_property(dn, "pci-OF-bus-map", NULL);
|
2006-07-12 05:35:54 +00:00
|
|
|
if (map_prop) {
|
|
|
|
BUG_ON(pci_bus_count > map_prop->length);
|
|
|
|
memcpy(map_prop->value, pci_to_OF_bus_map, pci_bus_count);
|
|
|
|
}
|
2007-04-24 03:50:55 +00:00
|
|
|
of_node_put(dn);
|
2006-01-15 11:05:47 +00:00
|
|
|
#ifdef DEBUG
|
|
|
|
printk("PCI->OF bus map:\n");
|
|
|
|
for (i=0; i<pci_bus_count; i++) {
|
|
|
|
if (pci_to_OF_bus_map[i] == 0xff)
|
|
|
|
continue;
|
|
|
|
printk("%d -> %d\n", i, pci_to_OF_bus_map[i]);
|
|
|
|
}
|
|
|
|
#endif
|
|
|
|
}
|
|
|
|
|
|
|
|
typedef int (*pci_OF_scan_iterator)(struct device_node* node, void* data);
|
|
|
|
|
|
|
|
static struct device_node*
|
|
|
|
scan_OF_pci_childs(struct device_node* node, pci_OF_scan_iterator filter, void* data)
|
|
|
|
{
|
|
|
|
struct device_node* sub_node;
|
|
|
|
|
|
|
|
for (; node != 0;node = node->sibling) {
|
2006-07-12 05:35:54 +00:00
|
|
|
const unsigned int *class_code;
|
2006-01-15 11:05:47 +00:00
|
|
|
|
|
|
|
if (filter(node, data))
|
|
|
|
return node;
|
|
|
|
|
|
|
|
/* For PCI<->PCI bridges or CardBus bridges, we go down
|
|
|
|
* Note: some OFs create a parent node "multifunc-device" as
|
|
|
|
* a fake root for all functions of a multi-function device,
|
|
|
|
* we go down them as well.
|
|
|
|
*/
|
2007-04-03 12:26:41 +00:00
|
|
|
class_code = of_get_property(node, "class-code", NULL);
|
2006-01-15 11:05:47 +00:00
|
|
|
if ((!class_code || ((*class_code >> 8) != PCI_CLASS_BRIDGE_PCI &&
|
|
|
|
(*class_code >> 8) != PCI_CLASS_BRIDGE_CARDBUS)) &&
|
|
|
|
strcmp(node->name, "multifunc-device"))
|
|
|
|
continue;
|
|
|
|
sub_node = scan_OF_pci_childs(node->child, filter, data);
|
|
|
|
if (sub_node)
|
|
|
|
return sub_node;
|
|
|
|
}
|
|
|
|
return NULL;
|
|
|
|
}
|
|
|
|
|
2006-12-11 03:09:07 +00:00
|
|
|
static struct device_node *scan_OF_for_pci_dev(struct device_node *parent,
|
|
|
|
unsigned int devfn)
|
2006-01-15 11:05:47 +00:00
|
|
|
{
|
2006-12-11 03:09:07 +00:00
|
|
|
struct device_node *np = NULL;
|
|
|
|
const u32 *reg;
|
|
|
|
unsigned int psize;
|
|
|
|
|
|
|
|
while ((np = of_get_next_child(parent, np)) != NULL) {
|
2007-04-03 12:26:41 +00:00
|
|
|
reg = of_get_property(np, "reg", &psize);
|
2006-12-11 03:09:07 +00:00
|
|
|
if (reg == NULL || psize < 4)
|
|
|
|
continue;
|
|
|
|
if (((reg[0] >> 8) & 0xff) == devfn)
|
|
|
|
return np;
|
|
|
|
}
|
|
|
|
return NULL;
|
2006-01-15 11:05:47 +00:00
|
|
|
}
|
|
|
|
|
2006-12-11 03:09:07 +00:00
|
|
|
|
|
|
|
static struct device_node *scan_OF_for_pci_bus(struct pci_bus *bus)
|
2006-01-15 11:05:47 +00:00
|
|
|
{
|
2006-12-11 03:09:07 +00:00
|
|
|
struct device_node *parent, *np;
|
|
|
|
|
|
|
|
/* Are we a root bus ? */
|
|
|
|
if (bus->self == NULL || bus->parent == NULL) {
|
|
|
|
struct pci_controller *hose = pci_bus_to_hose(bus->number);
|
|
|
|
if (hose == NULL)
|
|
|
|
return NULL;
|
|
|
|
return of_node_get(hose->arch_data);
|
|
|
|
}
|
|
|
|
|
|
|
|
/* not a root bus, we need to get our parent */
|
|
|
|
parent = scan_OF_for_pci_bus(bus->parent);
|
|
|
|
if (parent == NULL)
|
|
|
|
return NULL;
|
|
|
|
|
|
|
|
/* now iterate for children for a match */
|
|
|
|
np = scan_OF_for_pci_dev(parent, bus->self->devfn);
|
|
|
|
of_node_put(parent);
|
|
|
|
|
|
|
|
return np;
|
2006-01-15 11:05:47 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Scans the OF tree for a device node matching a PCI device
|
|
|
|
*/
|
|
|
|
struct device_node *
|
|
|
|
pci_busdev_to_OF_node(struct pci_bus *bus, int devfn)
|
|
|
|
{
|
2006-12-11 03:09:07 +00:00
|
|
|
struct device_node *parent, *np;
|
2006-01-15 11:05:47 +00:00
|
|
|
|
|
|
|
if (!have_of)
|
|
|
|
return NULL;
|
|
|
|
|
2006-12-11 03:09:07 +00:00
|
|
|
DBG("pci_busdev_to_OF_node(%d,0x%x)\n", bus->number, devfn);
|
|
|
|
parent = scan_OF_for_pci_bus(bus);
|
|
|
|
if (parent == NULL)
|
2006-01-15 11:05:47 +00:00
|
|
|
return NULL;
|
2006-12-11 03:09:07 +00:00
|
|
|
DBG(" parent is %s\n", parent ? parent->full_name : "<NULL>");
|
|
|
|
np = scan_OF_for_pci_dev(parent, devfn);
|
|
|
|
of_node_put(parent);
|
|
|
|
DBG(" result is %s\n", np ? np->full_name : "<NULL>");
|
|
|
|
|
|
|
|
/* XXX most callers don't release the returned node
|
|
|
|
* mostly because ppc64 doesn't increase the refcount,
|
|
|
|
* we need to fix that.
|
2006-01-15 11:05:47 +00:00
|
|
|
*/
|
2006-12-11 03:09:07 +00:00
|
|
|
return np;
|
2006-01-15 11:05:47 +00:00
|
|
|
}
|
|
|
|
EXPORT_SYMBOL(pci_busdev_to_OF_node);
|
|
|
|
|
|
|
|
struct device_node*
|
|
|
|
pci_device_to_OF_node(struct pci_dev *dev)
|
|
|
|
{
|
|
|
|
return pci_busdev_to_OF_node(dev->bus, dev->devfn);
|
|
|
|
}
|
|
|
|
EXPORT_SYMBOL(pci_device_to_OF_node);
|
|
|
|
|
|
|
|
/* This routine is meant to be used early during boot, when the
|
|
|
|
* PCI bus numbers have not yet been assigned, and you need to
|
|
|
|
* issue PCI config cycles to an OF device.
|
|
|
|
* It could also be used to "fix" RTAS config cycles if you want
|
|
|
|
* to set pci_assign_all_buses to 1 and still use RTAS for PCI
|
|
|
|
* config cycles.
|
|
|
|
*/
|
|
|
|
struct pci_controller* pci_find_hose_for_OF_device(struct device_node* node)
|
|
|
|
{
|
|
|
|
if (!have_of)
|
|
|
|
return NULL;
|
|
|
|
while(node) {
|
|
|
|
struct pci_controller* hose;
|
|
|
|
for (hose=hose_head;hose;hose=hose->next)
|
|
|
|
if (hose->arch_data == node)
|
|
|
|
return hose;
|
|
|
|
node=node->parent;
|
|
|
|
}
|
|
|
|
return NULL;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int
|
|
|
|
find_OF_pci_device_filter(struct device_node* node, void* data)
|
|
|
|
{
|
|
|
|
return ((void *)node == data);
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Returns the PCI device matching a given OF node
|
|
|
|
*/
|
|
|
|
int
|
|
|
|
pci_device_from_OF_node(struct device_node* node, u8* bus, u8* devfn)
|
|
|
|
{
|
2006-07-12 05:35:54 +00:00
|
|
|
const unsigned int *reg;
|
2006-01-15 11:05:47 +00:00
|
|
|
struct pci_controller* hose;
|
|
|
|
struct pci_dev* dev = NULL;
|
|
|
|
|
|
|
|
if (!have_of)
|
|
|
|
return -ENODEV;
|
|
|
|
/* Make sure it's really a PCI device */
|
|
|
|
hose = pci_find_hose_for_OF_device(node);
|
|
|
|
if (!hose || !hose->arch_data)
|
|
|
|
return -ENODEV;
|
|
|
|
if (!scan_OF_pci_childs(((struct device_node*)hose->arch_data)->child,
|
|
|
|
find_OF_pci_device_filter, (void *)node))
|
|
|
|
return -ENODEV;
|
2007-04-03 12:26:41 +00:00
|
|
|
reg = of_get_property(node, "reg", NULL);
|
2006-01-15 11:05:47 +00:00
|
|
|
if (!reg)
|
|
|
|
return -ENODEV;
|
|
|
|
*bus = (reg[0] >> 16) & 0xff;
|
|
|
|
*devfn = ((reg[0] >> 8) & 0xff);
|
|
|
|
|
|
|
|
/* Ok, here we need some tweak. If we have already renumbered
|
|
|
|
* all busses, we can't rely on the OF bus number any more.
|
|
|
|
* the pci_to_OF_bus_map is not enough as several PCI busses
|
|
|
|
* may match the same OF bus number.
|
|
|
|
*/
|
|
|
|
if (!pci_to_OF_bus_map)
|
|
|
|
return 0;
|
|
|
|
|
|
|
|
for_each_pci_dev(dev)
|
|
|
|
if (pci_to_OF_bus_map[dev->bus->number] == *bus &&
|
|
|
|
dev->devfn == *devfn) {
|
|
|
|
*bus = dev->bus->number;
|
|
|
|
pci_dev_put(dev);
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
return -ENODEV;
|
|
|
|
}
|
|
|
|
EXPORT_SYMBOL(pci_device_from_OF_node);
|
|
|
|
|
|
|
|
void __init
|
|
|
|
pci_process_bridge_OF_ranges(struct pci_controller *hose,
|
|
|
|
struct device_node *dev, int primary)
|
|
|
|
{
|
|
|
|
static unsigned int static_lc_ranges[256] __initdata;
|
2006-07-12 05:35:54 +00:00
|
|
|
const unsigned int *dt_ranges;
|
|
|
|
unsigned int *lc_ranges, *ranges, *prev, size;
|
2006-01-15 11:05:47 +00:00
|
|
|
int rlen = 0, orig_rlen;
|
|
|
|
int memno = 0;
|
|
|
|
struct resource *res;
|
2007-04-03 00:56:50 +00:00
|
|
|
int np, na = of_n_addr_cells(dev);
|
2006-01-15 11:05:47 +00:00
|
|
|
np = na + 5;
|
|
|
|
|
|
|
|
/* First we try to merge ranges to fix a problem with some pmacs
|
|
|
|
* that can have more than 3 ranges, fortunately using contiguous
|
|
|
|
* addresses -- BenH
|
|
|
|
*/
|
2007-04-03 12:26:41 +00:00
|
|
|
dt_ranges = of_get_property(dev, "ranges", &rlen);
|
2006-01-15 11:05:47 +00:00
|
|
|
if (!dt_ranges)
|
|
|
|
return;
|
|
|
|
/* Sanity check, though hopefully that never happens */
|
|
|
|
if (rlen > sizeof(static_lc_ranges)) {
|
|
|
|
printk(KERN_WARNING "OF ranges property too large !\n");
|
|
|
|
rlen = sizeof(static_lc_ranges);
|
|
|
|
}
|
|
|
|
lc_ranges = static_lc_ranges;
|
|
|
|
memcpy(lc_ranges, dt_ranges, rlen);
|
|
|
|
orig_rlen = rlen;
|
|
|
|
|
|
|
|
/* Let's work on a copy of the "ranges" property instead of damaging
|
|
|
|
* the device-tree image in memory
|
|
|
|
*/
|
|
|
|
ranges = lc_ranges;
|
|
|
|
prev = NULL;
|
|
|
|
while ((rlen -= np * sizeof(unsigned int)) >= 0) {
|
|
|
|
if (prev) {
|
|
|
|
if (prev[0] == ranges[0] && prev[1] == ranges[1] &&
|
|
|
|
(prev[2] + prev[na+4]) == ranges[2] &&
|
|
|
|
(prev[na+2] + prev[na+4]) == ranges[na+2]) {
|
|
|
|
prev[na+4] += ranges[na+4];
|
|
|
|
ranges[0] = 0;
|
|
|
|
ranges += np;
|
|
|
|
continue;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
prev = ranges;
|
|
|
|
ranges += np;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* The ranges property is laid out as an array of elements,
|
|
|
|
* each of which comprises:
|
|
|
|
* cells 0 - 2: a PCI address
|
|
|
|
* cells 3 or 3+4: a CPU physical address
|
|
|
|
* (size depending on dev->n_addr_cells)
|
|
|
|
* cells 4+5 or 5+6: the size of the range
|
|
|
|
*/
|
|
|
|
ranges = lc_ranges;
|
|
|
|
rlen = orig_rlen;
|
|
|
|
while (ranges && (rlen -= np * sizeof(unsigned int)) >= 0) {
|
|
|
|
res = NULL;
|
|
|
|
size = ranges[na+4];
|
|
|
|
switch ((ranges[0] >> 24) & 0x3) {
|
|
|
|
case 1: /* I/O space */
|
|
|
|
if (ranges[2] != 0)
|
|
|
|
break;
|
|
|
|
hose->io_base_phys = ranges[na+2];
|
|
|
|
/* limit I/O space to 16MB */
|
|
|
|
if (size > 0x01000000)
|
|
|
|
size = 0x01000000;
|
|
|
|
hose->io_base_virt = ioremap(ranges[na+2], size);
|
|
|
|
if (primary)
|
|
|
|
isa_io_base = (unsigned long) hose->io_base_virt;
|
|
|
|
res = &hose->io_resource;
|
|
|
|
res->flags = IORESOURCE_IO;
|
|
|
|
res->start = ranges[2];
|
2006-06-12 22:18:31 +00:00
|
|
|
DBG("PCI: IO 0x%llx -> 0x%llx\n",
|
2006-12-03 17:52:27 +00:00
|
|
|
(u64)res->start, (u64)res->start + size - 1);
|
2006-01-15 11:05:47 +00:00
|
|
|
break;
|
|
|
|
case 2: /* memory space */
|
|
|
|
memno = 0;
|
|
|
|
if (ranges[1] == 0 && ranges[2] == 0
|
|
|
|
&& ranges[na+4] <= (16 << 20)) {
|
|
|
|
/* 1st 16MB, i.e. ISA memory area */
|
|
|
|
if (primary)
|
|
|
|
isa_mem_base = ranges[na+2];
|
|
|
|
memno = 1;
|
|
|
|
}
|
|
|
|
while (memno < 3 && hose->mem_resources[memno].flags)
|
|
|
|
++memno;
|
|
|
|
if (memno == 0)
|
|
|
|
hose->pci_mem_offset = ranges[na+2] - ranges[2];
|
|
|
|
if (memno < 3) {
|
|
|
|
res = &hose->mem_resources[memno];
|
|
|
|
res->flags = IORESOURCE_MEM;
|
|
|
|
if(ranges[0] & 0x40000000)
|
|
|
|
res->flags |= IORESOURCE_PREFETCH;
|
|
|
|
res->start = ranges[na+2];
|
2006-06-12 22:18:31 +00:00
|
|
|
DBG("PCI: MEM[%d] 0x%llx -> 0x%llx\n", memno,
|
2006-12-03 17:52:27 +00:00
|
|
|
(u64)res->start, (u64)res->start + size - 1);
|
2006-01-15 11:05:47 +00:00
|
|
|
}
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
if (res != NULL) {
|
|
|
|
res->name = dev->full_name;
|
|
|
|
res->end = res->start + size - 1;
|
|
|
|
res->parent = NULL;
|
|
|
|
res->sibling = NULL;
|
|
|
|
res->child = NULL;
|
|
|
|
}
|
|
|
|
ranges += np;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
/* We create the "pci-OF-bus-map" property now so it appears in the
|
|
|
|
* /proc device tree
|
|
|
|
*/
|
|
|
|
void __init
|
|
|
|
pci_create_OF_bus_map(void)
|
|
|
|
{
|
|
|
|
struct property* of_prop;
|
2007-04-24 03:50:55 +00:00
|
|
|
struct device_node *dn;
|
|
|
|
|
2006-01-15 11:05:47 +00:00
|
|
|
of_prop = (struct property*) alloc_bootmem(sizeof(struct property) + 256);
|
2007-04-24 03:50:55 +00:00
|
|
|
if (!of_prop)
|
|
|
|
return;
|
|
|
|
dn = of_find_node_by_path("/");
|
|
|
|
if (dn) {
|
2006-01-15 11:05:47 +00:00
|
|
|
memset(of_prop, -1, sizeof(struct property) + 256);
|
|
|
|
of_prop->name = "pci-OF-bus-map";
|
|
|
|
of_prop->length = 256;
|
2007-04-03 00:58:52 +00:00
|
|
|
of_prop->value = &of_prop[1];
|
2007-04-24 03:50:55 +00:00
|
|
|
prom_add_property(dn, of_prop);
|
|
|
|
of_node_put(dn);
|
2006-01-15 11:05:47 +00:00
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
static ssize_t pci_show_devspec(struct device *dev, struct device_attribute *attr, char *buf)
|
|
|
|
{
|
|
|
|
struct pci_dev *pdev;
|
|
|
|
struct device_node *np;
|
|
|
|
|
|
|
|
pdev = to_pci_dev (dev);
|
|
|
|
np = pci_device_to_OF_node(pdev);
|
|
|
|
if (np == NULL || np->full_name == NULL)
|
|
|
|
return 0;
|
|
|
|
return sprintf(buf, "%s", np->full_name);
|
|
|
|
}
|
|
|
|
static DEVICE_ATTR(devspec, S_IRUGO, pci_show_devspec, NULL);
|
|
|
|
|
|
|
|
#else /* CONFIG_PPC_OF */
|
|
|
|
void pcibios_make_OF_bus_map(void)
|
|
|
|
{
|
|
|
|
}
|
|
|
|
#endif /* CONFIG_PPC_OF */
|
|
|
|
|
|
|
|
/* Add sysfs properties */
|
|
|
|
void pcibios_add_platform_entries(struct pci_dev *pdev)
|
|
|
|
{
|
|
|
|
#ifdef CONFIG_PPC_OF
|
|
|
|
device_create_file(&pdev->dev, &dev_attr_devspec);
|
|
|
|
#endif /* CONFIG_PPC_OF */
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
#ifdef CONFIG_PPC_PMAC
|
|
|
|
/*
|
|
|
|
* This set of routines checks for PCI<->PCI bridges that have closed
|
|
|
|
* IO resources and have child devices. It tries to re-open an IO
|
|
|
|
* window on them.
|
|
|
|
*
|
|
|
|
* This is a _temporary_ fix to workaround a problem with Apple's OF
|
|
|
|
* closing IO windows on P2P bridges when the OF drivers of cards
|
|
|
|
* below this bridge don't claim any IO range (typically ATI or
|
|
|
|
* Adaptec).
|
|
|
|
*
|
|
|
|
* A more complete fix would be to use drivers/pci/setup-bus.c, which
|
|
|
|
* involves a working pcibios_fixup_pbus_ranges(), some more care about
|
|
|
|
* ordering when creating the host bus resources, and maybe a few more
|
|
|
|
* minor tweaks
|
|
|
|
*/
|
|
|
|
|
|
|
|
/* Initialize bridges with base/limit values we have collected */
|
|
|
|
static void __init
|
|
|
|
do_update_p2p_io_resource(struct pci_bus *bus, int enable_vga)
|
|
|
|
{
|
|
|
|
struct pci_dev *bridge = bus->self;
|
|
|
|
struct pci_controller* hose = (struct pci_controller *)bridge->sysdata;
|
|
|
|
u32 l;
|
|
|
|
u16 w;
|
|
|
|
struct resource res;
|
|
|
|
|
|
|
|
if (bus->resource[0] == NULL)
|
|
|
|
return;
|
|
|
|
res = *(bus->resource[0]);
|
|
|
|
|
|
|
|
DBG("Remapping Bus %d, bridge: %s\n", bus->number, pci_name(bridge));
|
|
|
|
res.start -= ((unsigned long) hose->io_base_virt - isa_io_base);
|
|
|
|
res.end -= ((unsigned long) hose->io_base_virt - isa_io_base);
|
2006-06-12 22:18:31 +00:00
|
|
|
DBG(" IO window: %016llx-%016llx\n", res.start, res.end);
|
2006-01-15 11:05:47 +00:00
|
|
|
|
|
|
|
/* Set up the top and bottom of the PCI I/O segment for this bus. */
|
|
|
|
pci_read_config_dword(bridge, PCI_IO_BASE, &l);
|
|
|
|
l &= 0xffff000f;
|
|
|
|
l |= (res.start >> 8) & 0x00f0;
|
|
|
|
l |= res.end & 0xf000;
|
|
|
|
pci_write_config_dword(bridge, PCI_IO_BASE, l);
|
|
|
|
|
|
|
|
if ((l & PCI_IO_RANGE_TYPE_MASK) == PCI_IO_RANGE_TYPE_32) {
|
|
|
|
l = (res.start >> 16) | (res.end & 0xffff0000);
|
|
|
|
pci_write_config_dword(bridge, PCI_IO_BASE_UPPER16, l);
|
|
|
|
}
|
|
|
|
|
|
|
|
pci_read_config_word(bridge, PCI_COMMAND, &w);
|
|
|
|
w |= PCI_COMMAND_IO;
|
|
|
|
pci_write_config_word(bridge, PCI_COMMAND, w);
|
|
|
|
|
|
|
|
#if 0 /* Enabling this causes XFree 4.2.0 to hang during PCI probe */
|
|
|
|
if (enable_vga) {
|
|
|
|
pci_read_config_word(bridge, PCI_BRIDGE_CONTROL, &w);
|
|
|
|
w |= PCI_BRIDGE_CTL_VGA;
|
|
|
|
pci_write_config_word(bridge, PCI_BRIDGE_CONTROL, w);
|
|
|
|
}
|
|
|
|
#endif
|
|
|
|
}
|
|
|
|
|
|
|
|
/* This function is pretty basic and actually quite broken for the
|
|
|
|
* general case, it's enough for us right now though. It's supposed
|
|
|
|
* to tell us if we need to open an IO range at all or not and what
|
|
|
|
* size.
|
|
|
|
*/
|
|
|
|
static int __init
|
|
|
|
check_for_io_childs(struct pci_bus *bus, struct resource* res, int *found_vga)
|
|
|
|
{
|
|
|
|
struct pci_dev *dev;
|
|
|
|
int i;
|
|
|
|
int rc = 0;
|
|
|
|
|
2006-06-15 08:03:32 +00:00
|
|
|
#define push_end(res, mask) do { \
|
|
|
|
BUG_ON((mask+1) & mask); \
|
|
|
|
res->end = (res->end + mask) | mask; \
|
|
|
|
} while (0)
|
2006-01-15 11:05:47 +00:00
|
|
|
|
|
|
|
list_for_each_entry(dev, &bus->devices, bus_list) {
|
|
|
|
u16 class = dev->class >> 8;
|
|
|
|
|
|
|
|
if (class == PCI_CLASS_DISPLAY_VGA ||
|
|
|
|
class == PCI_CLASS_NOT_DEFINED_VGA)
|
|
|
|
*found_vga = 1;
|
|
|
|
if (class >> 8 == PCI_BASE_CLASS_BRIDGE && dev->subordinate)
|
|
|
|
rc |= check_for_io_childs(dev->subordinate, res, found_vga);
|
|
|
|
if (class == PCI_CLASS_BRIDGE_CARDBUS)
|
|
|
|
push_end(res, 0xfff);
|
|
|
|
|
|
|
|
for (i=0; i<PCI_NUM_RESOURCES; i++) {
|
|
|
|
struct resource *r;
|
|
|
|
unsigned long r_size;
|
|
|
|
|
|
|
|
if (dev->class >> 8 == PCI_CLASS_BRIDGE_PCI
|
|
|
|
&& i >= PCI_BRIDGE_RESOURCES)
|
|
|
|
continue;
|
|
|
|
r = &dev->resource[i];
|
|
|
|
r_size = r->end - r->start;
|
|
|
|
if (r_size < 0xfff)
|
|
|
|
r_size = 0xfff;
|
|
|
|
if (r->flags & IORESOURCE_IO && (r_size) != 0) {
|
|
|
|
rc = 1;
|
|
|
|
push_end(res, r_size);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
return rc;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Here we scan all P2P bridges of a given level that have a closed
|
|
|
|
* IO window. Note that the test for the presence of a VGA card should
|
|
|
|
* be improved to take into account already configured P2P bridges,
|
|
|
|
* currently, we don't see them and might end up configuring 2 bridges
|
|
|
|
* with VGA pass through enabled
|
|
|
|
*/
|
|
|
|
static void __init
|
|
|
|
do_fixup_p2p_level(struct pci_bus *bus)
|
|
|
|
{
|
|
|
|
struct pci_bus *b;
|
|
|
|
int i, parent_io;
|
|
|
|
int has_vga = 0;
|
|
|
|
|
|
|
|
for (parent_io=0; parent_io<4; parent_io++)
|
|
|
|
if (bus->resource[parent_io]
|
|
|
|
&& bus->resource[parent_io]->flags & IORESOURCE_IO)
|
|
|
|
break;
|
|
|
|
if (parent_io >= 4)
|
|
|
|
return;
|
|
|
|
|
|
|
|
list_for_each_entry(b, &bus->children, node) {
|
|
|
|
struct pci_dev *d = b->self;
|
|
|
|
struct pci_controller* hose = (struct pci_controller *)d->sysdata;
|
|
|
|
struct resource *res = b->resource[0];
|
|
|
|
struct resource tmp_res;
|
|
|
|
unsigned long max;
|
|
|
|
int found_vga = 0;
|
|
|
|
|
|
|
|
memset(&tmp_res, 0, sizeof(tmp_res));
|
|
|
|
tmp_res.start = bus->resource[parent_io]->start;
|
|
|
|
|
|
|
|
/* We don't let low addresses go through that closed P2P bridge, well,
|
|
|
|
* that may not be necessary but I feel safer that way
|
|
|
|
*/
|
|
|
|
if (tmp_res.start == 0)
|
|
|
|
tmp_res.start = 0x1000;
|
|
|
|
|
|
|
|
if (!list_empty(&b->devices) && res && res->flags == 0 &&
|
|
|
|
res != bus->resource[parent_io] &&
|
|
|
|
(d->class >> 8) == PCI_CLASS_BRIDGE_PCI &&
|
|
|
|
check_for_io_childs(b, &tmp_res, &found_vga)) {
|
|
|
|
u8 io_base_lo;
|
|
|
|
|
|
|
|
printk(KERN_INFO "Fixing up IO bus %s\n", b->name);
|
|
|
|
|
|
|
|
if (found_vga) {
|
|
|
|
if (has_vga) {
|
|
|
|
printk(KERN_WARNING "Skipping VGA, already active"
|
|
|
|
" on bus segment\n");
|
|
|
|
found_vga = 0;
|
|
|
|
} else
|
|
|
|
has_vga = 1;
|
|
|
|
}
|
|
|
|
pci_read_config_byte(d, PCI_IO_BASE, &io_base_lo);
|
|
|
|
|
|
|
|
if ((io_base_lo & PCI_IO_RANGE_TYPE_MASK) == PCI_IO_RANGE_TYPE_32)
|
|
|
|
max = ((unsigned long) hose->io_base_virt
|
|
|
|
- isa_io_base) + 0xffffffff;
|
|
|
|
else
|
|
|
|
max = ((unsigned long) hose->io_base_virt
|
|
|
|
- isa_io_base) + 0xffff;
|
|
|
|
|
|
|
|
*res = tmp_res;
|
|
|
|
res->flags = IORESOURCE_IO;
|
|
|
|
res->name = b->name;
|
|
|
|
|
|
|
|
/* Find a resource in the parent where we can allocate */
|
|
|
|
for (i = 0 ; i < 4; i++) {
|
|
|
|
struct resource *r = bus->resource[i];
|
|
|
|
if (!r)
|
|
|
|
continue;
|
|
|
|
if ((r->flags & IORESOURCE_IO) == 0)
|
|
|
|
continue;
|
2006-06-12 22:18:31 +00:00
|
|
|
DBG("Trying to allocate from %016llx, size %016llx from parent"
|
|
|
|
" res %d: %016llx -> %016llx\n",
|
2006-01-15 11:05:47 +00:00
|
|
|
res->start, res->end, i, r->start, r->end);
|
|
|
|
|
|
|
|
if (allocate_resource(r, res, res->end + 1, res->start, max,
|
|
|
|
res->end + 1, NULL, NULL) < 0) {
|
|
|
|
DBG("Failed !\n");
|
|
|
|
continue;
|
|
|
|
}
|
|
|
|
do_update_p2p_io_resource(b, found_vga);
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
do_fixup_p2p_level(b);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
static void
|
|
|
|
pcibios_fixup_p2p_bridges(void)
|
|
|
|
{
|
|
|
|
struct pci_bus *b;
|
|
|
|
|
|
|
|
list_for_each_entry(b, &pci_root_buses, node)
|
|
|
|
do_fixup_p2p_level(b);
|
|
|
|
}
|
|
|
|
|
|
|
|
#endif /* CONFIG_PPC_PMAC */
|
|
|
|
|
|
|
|
static int __init
|
|
|
|
pcibios_init(void)
|
|
|
|
{
|
|
|
|
struct pci_controller *hose;
|
|
|
|
struct pci_bus *bus;
|
|
|
|
int next_busno;
|
|
|
|
|
|
|
|
printk(KERN_INFO "PCI: Probing PCI hardware\n");
|
|
|
|
|
|
|
|
/* Scan all of the recorded PCI controllers. */
|
|
|
|
for (next_busno = 0, hose = hose_head; hose; hose = hose->next) {
|
|
|
|
if (pci_assign_all_buses)
|
|
|
|
hose->first_busno = next_busno;
|
|
|
|
hose->last_busno = 0xff;
|
2006-11-11 06:25:07 +00:00
|
|
|
bus = pci_scan_bus_parented(hose->parent, hose->first_busno,
|
|
|
|
hose->ops, hose);
|
|
|
|
if (bus)
|
|
|
|
pci_bus_add_devices(bus);
|
2006-01-15 11:05:47 +00:00
|
|
|
hose->last_busno = bus->subordinate;
|
|
|
|
if (pci_assign_all_buses || next_busno <= hose->last_busno)
|
|
|
|
next_busno = hose->last_busno + pcibios_assign_bus_offset;
|
|
|
|
}
|
|
|
|
pci_bus_count = next_busno;
|
|
|
|
|
|
|
|
/* OpenFirmware based machines need a map of OF bus
|
|
|
|
* numbers vs. kernel bus numbers since we may have to
|
|
|
|
* remap them.
|
|
|
|
*/
|
|
|
|
if (pci_assign_all_buses && have_of)
|
|
|
|
pcibios_make_OF_bus_map();
|
|
|
|
|
|
|
|
/* Call machine dependent fixup */
|
|
|
|
if (ppc_md.pcibios_fixup)
|
|
|
|
ppc_md.pcibios_fixup();
|
|
|
|
|
|
|
|
/* Allocate and assign resources */
|
|
|
|
pcibios_allocate_bus_resources(&pci_root_buses);
|
|
|
|
pcibios_allocate_resources(0);
|
|
|
|
pcibios_allocate_resources(1);
|
|
|
|
#ifdef CONFIG_PPC_PMAC
|
|
|
|
pcibios_fixup_p2p_bridges();
|
|
|
|
#endif /* CONFIG_PPC_PMAC */
|
|
|
|
pcibios_assign_resources();
|
|
|
|
|
|
|
|
/* Call machine dependent post-init code */
|
|
|
|
if (ppc_md.pcibios_after_init)
|
|
|
|
ppc_md.pcibios_after_init();
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
subsys_initcall(pcibios_init);
|
|
|
|
|
|
|
|
unsigned long resource_fixup(struct pci_dev * dev, struct resource * res,
|
|
|
|
unsigned long start, unsigned long size)
|
|
|
|
{
|
|
|
|
return start;
|
|
|
|
}
|
|
|
|
|
|
|
|
void __init pcibios_fixup_bus(struct pci_bus *bus)
|
|
|
|
{
|
|
|
|
struct pci_controller *hose = (struct pci_controller *) bus->sysdata;
|
|
|
|
unsigned long io_offset;
|
|
|
|
struct resource *res;
|
2006-11-11 06:24:51 +00:00
|
|
|
struct pci_dev *dev;
|
2006-01-15 11:05:47 +00:00
|
|
|
int i;
|
|
|
|
|
|
|
|
io_offset = (unsigned long)hose->io_base_virt - isa_io_base;
|
|
|
|
if (bus->parent == NULL) {
|
|
|
|
/* This is a host bridge - fill in its resources */
|
|
|
|
hose->bus = bus;
|
|
|
|
|
|
|
|
bus->resource[0] = res = &hose->io_resource;
|
|
|
|
if (!res->flags) {
|
|
|
|
if (io_offset)
|
|
|
|
printk(KERN_ERR "I/O resource not set for host"
|
|
|
|
" bridge %d\n", hose->index);
|
|
|
|
res->start = 0;
|
|
|
|
res->end = IO_SPACE_LIMIT;
|
|
|
|
res->flags = IORESOURCE_IO;
|
|
|
|
}
|
|
|
|
res->start += io_offset;
|
|
|
|
res->end += io_offset;
|
|
|
|
|
|
|
|
for (i = 0; i < 3; ++i) {
|
|
|
|
res = &hose->mem_resources[i];
|
|
|
|
if (!res->flags) {
|
|
|
|
if (i > 0)
|
|
|
|
continue;
|
|
|
|
printk(KERN_ERR "Memory resource not set for "
|
|
|
|
"host bridge %d\n", hose->index);
|
|
|
|
res->start = hose->pci_mem_offset;
|
|
|
|
res->end = ~0U;
|
|
|
|
res->flags = IORESOURCE_MEM;
|
|
|
|
}
|
|
|
|
bus->resource[i+1] = res;
|
|
|
|
}
|
|
|
|
} else {
|
|
|
|
/* This is a subordinate bridge */
|
|
|
|
pci_read_bridge_bases(bus);
|
|
|
|
|
|
|
|
for (i = 0; i < 4; ++i) {
|
|
|
|
if ((res = bus->resource[i]) == NULL)
|
|
|
|
continue;
|
|
|
|
if (!res->flags)
|
|
|
|
continue;
|
|
|
|
if (io_offset && (res->flags & IORESOURCE_IO)) {
|
|
|
|
res->start += io_offset;
|
|
|
|
res->end += io_offset;
|
|
|
|
} else if (hose->pci_mem_offset
|
|
|
|
&& (res->flags & IORESOURCE_MEM)) {
|
|
|
|
res->start += hose->pci_mem_offset;
|
|
|
|
res->end += hose->pci_mem_offset;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2006-11-11 06:24:51 +00:00
|
|
|
/* Platform specific bus fixups */
|
2006-01-15 11:05:47 +00:00
|
|
|
if (ppc_md.pcibios_fixup_bus)
|
|
|
|
ppc_md.pcibios_fixup_bus(bus);
|
2006-11-11 06:24:51 +00:00
|
|
|
|
|
|
|
/* Read default IRQs and fixup if necessary */
|
|
|
|
list_for_each_entry(dev, &bus->devices, bus_list) {
|
|
|
|
pci_read_irq_line(dev);
|
|
|
|
if (ppc_md.pci_irq_fixup)
|
|
|
|
ppc_md.pci_irq_fixup(dev);
|
|
|
|
}
|
2006-01-15 11:05:47 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
char __init *pcibios_setup(char *str)
|
|
|
|
{
|
|
|
|
return str;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* the next one is stolen from the alpha port... */
|
|
|
|
void __init
|
|
|
|
pcibios_update_irq(struct pci_dev *dev, int irq)
|
|
|
|
{
|
|
|
|
pci_write_config_byte(dev, PCI_INTERRUPT_LINE, irq);
|
|
|
|
/* XXX FIXME - update OF device tree node interrupt property */
|
|
|
|
}
|
|
|
|
|
2006-07-03 11:36:01 +00:00
|
|
|
#ifdef CONFIG_PPC_MERGE
|
|
|
|
/* XXX This is a copy of the ppc64 version. This is temporary until we start
|
|
|
|
* merging the 2 PCI layers
|
|
|
|
*/
|
|
|
|
/*
|
|
|
|
* Reads the interrupt pin to determine if interrupt is use by card.
|
|
|
|
* If the interrupt is used, then gets the interrupt line from the
|
|
|
|
* openfirmware and sets it in the pci_dev and pci_config line.
|
|
|
|
*/
|
|
|
|
int pci_read_irq_line(struct pci_dev *pci_dev)
|
|
|
|
{
|
|
|
|
struct of_irq oirq;
|
|
|
|
unsigned int virq;
|
|
|
|
|
|
|
|
DBG("Try to map irq for %s...\n", pci_name(pci_dev));
|
|
|
|
|
[PATCH] powerpc: fix trigger handling in the new irq code
This patch slightly reworks the new irq code to fix a small design error. I
removed the passing of the trigger to the map() calls entirely, it was not a
good idea to have one call do two different things. It also fixes a couple of
corner cases.
Mapping a linux virtual irq to a physical irq now does only that. Setting the
trigger is a different action which has a different call.
The main changes are:
- I no longer call host->ops->map() for an already mapped irq, I just return
the virtual number that was already mapped. It was called before to give an
opportunity to change the trigger, but that was causing issues as that could
happen while the interrupt was in use by a device, and because of the
trigger change, map would potentially muck around with things in a racy way.
That was causing much burden on a given's controller implementation of
map() to get it right. This is much simpler now. map() is only called on
the initial mapping of an irq, meaning that you know that this irq is _not_
being used. You can initialize the hardware if you want (though you don't
have to).
- Controllers that can handle different type of triggers (level/edge/etc...)
now implement the standard irq_chip->set_type() call as defined by the
generic code. That means that you can use the standard set_irq_type() to
configure an irq line manually if you wish or (though I don't like that
interface), pass explicit trigger flags to request_irq() as defined by the
generic kernel interfaces. Also, using those interfaces guarantees that
your controller set_type callback is called with the descriptor lock held,
thus providing locking against activity on the same interrupt (including
mask/unmask/etc...) automatically. A result is that, for example, MPIC's
own map() implementation calls irq_set_type(NONE) to configure the hardware
to the default triggers.
- To allow the above, the irq_map array entry for the new mapped interrupt
is now set before map() callback is called for the controller.
- The irq_create_of_mapping() (also used by irq_of_parse_and_map()) function
for mapping interrupts from the device-tree now also call the separate
set_irq_type(), and only does so if there is a change in the trigger type.
- While I was at it, I changed pci_read_irq_line() (which is the helper I
would expect most archs to use in their pcibios_fixup() to get the PCI
interrupt routing from the device tree) to also handle a fallback when the
DT mapping fails consisting of reading the PCI_INTERRUPT_PIN to know wether
the device has an interrupt at all, and the the PCI_INTERRUPT_LINE to get an
interrupt number from the device. That number is then mapped using the
default controller, and the trigger is set to level low. That default
behaviour works for several platforms that don't have a proper interrupt
tree like Pegasos. If it doesn't work for your platform, then either
provide a proper interrupt tree from the firmware so that fallback isn't
needed, or don't call pci_read_irq_line()
- Add back a bit that got dropped by my main rework patch for properly
clearing pending IPIs on pSeries when using a kexec
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-10 11:44:42 +00:00
|
|
|
/* Try to get a mapping from the device-tree */
|
2006-07-03 11:36:01 +00:00
|
|
|
if (of_irq_map_pci(pci_dev, &oirq)) {
|
[PATCH] powerpc: fix trigger handling in the new irq code
This patch slightly reworks the new irq code to fix a small design error. I
removed the passing of the trigger to the map() calls entirely, it was not a
good idea to have one call do two different things. It also fixes a couple of
corner cases.
Mapping a linux virtual irq to a physical irq now does only that. Setting the
trigger is a different action which has a different call.
The main changes are:
- I no longer call host->ops->map() for an already mapped irq, I just return
the virtual number that was already mapped. It was called before to give an
opportunity to change the trigger, but that was causing issues as that could
happen while the interrupt was in use by a device, and because of the
trigger change, map would potentially muck around with things in a racy way.
That was causing much burden on a given's controller implementation of
map() to get it right. This is much simpler now. map() is only called on
the initial mapping of an irq, meaning that you know that this irq is _not_
being used. You can initialize the hardware if you want (though you don't
have to).
- Controllers that can handle different type of triggers (level/edge/etc...)
now implement the standard irq_chip->set_type() call as defined by the
generic code. That means that you can use the standard set_irq_type() to
configure an irq line manually if you wish or (though I don't like that
interface), pass explicit trigger flags to request_irq() as defined by the
generic kernel interfaces. Also, using those interfaces guarantees that
your controller set_type callback is called with the descriptor lock held,
thus providing locking against activity on the same interrupt (including
mask/unmask/etc...) automatically. A result is that, for example, MPIC's
own map() implementation calls irq_set_type(NONE) to configure the hardware
to the default triggers.
- To allow the above, the irq_map array entry for the new mapped interrupt
is now set before map() callback is called for the controller.
- The irq_create_of_mapping() (also used by irq_of_parse_and_map()) function
for mapping interrupts from the device-tree now also call the separate
set_irq_type(), and only does so if there is a change in the trigger type.
- While I was at it, I changed pci_read_irq_line() (which is the helper I
would expect most archs to use in their pcibios_fixup() to get the PCI
interrupt routing from the device tree) to also handle a fallback when the
DT mapping fails consisting of reading the PCI_INTERRUPT_PIN to know wether
the device has an interrupt at all, and the the PCI_INTERRUPT_LINE to get an
interrupt number from the device. That number is then mapped using the
default controller, and the trigger is set to level low. That default
behaviour works for several platforms that don't have a proper interrupt
tree like Pegasos. If it doesn't work for your platform, then either
provide a proper interrupt tree from the firmware so that fallback isn't
needed, or don't call pci_read_irq_line()
- Add back a bit that got dropped by my main rework patch for properly
clearing pending IPIs on pSeries when using a kexec
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-10 11:44:42 +00:00
|
|
|
u8 line, pin;
|
|
|
|
|
|
|
|
/* If that fails, lets fallback to what is in the config
|
|
|
|
* space and map that through the default controller. We
|
|
|
|
* also set the type to level low since that's what PCI
|
|
|
|
* interrupts are. If your platform does differently, then
|
|
|
|
* either provide a proper interrupt tree or don't use this
|
|
|
|
* function.
|
|
|
|
*/
|
|
|
|
if (pci_read_config_byte(pci_dev, PCI_INTERRUPT_PIN, &pin))
|
|
|
|
return -1;
|
|
|
|
if (pin == 0)
|
|
|
|
return -1;
|
|
|
|
if (pci_read_config_byte(pci_dev, PCI_INTERRUPT_LINE, &line) ||
|
|
|
|
line == 0xff) {
|
|
|
|
return -1;
|
|
|
|
}
|
|
|
|
DBG(" -> no map ! Using irq line %d from PCI config\n", line);
|
2006-07-03 11:36:01 +00:00
|
|
|
|
[PATCH] powerpc: fix trigger handling in the new irq code
This patch slightly reworks the new irq code to fix a small design error. I
removed the passing of the trigger to the map() calls entirely, it was not a
good idea to have one call do two different things. It also fixes a couple of
corner cases.
Mapping a linux virtual irq to a physical irq now does only that. Setting the
trigger is a different action which has a different call.
The main changes are:
- I no longer call host->ops->map() for an already mapped irq, I just return
the virtual number that was already mapped. It was called before to give an
opportunity to change the trigger, but that was causing issues as that could
happen while the interrupt was in use by a device, and because of the
trigger change, map would potentially muck around with things in a racy way.
That was causing much burden on a given's controller implementation of
map() to get it right. This is much simpler now. map() is only called on
the initial mapping of an irq, meaning that you know that this irq is _not_
being used. You can initialize the hardware if you want (though you don't
have to).
- Controllers that can handle different type of triggers (level/edge/etc...)
now implement the standard irq_chip->set_type() call as defined by the
generic code. That means that you can use the standard set_irq_type() to
configure an irq line manually if you wish or (though I don't like that
interface), pass explicit trigger flags to request_irq() as defined by the
generic kernel interfaces. Also, using those interfaces guarantees that
your controller set_type callback is called with the descriptor lock held,
thus providing locking against activity on the same interrupt (including
mask/unmask/etc...) automatically. A result is that, for example, MPIC's
own map() implementation calls irq_set_type(NONE) to configure the hardware
to the default triggers.
- To allow the above, the irq_map array entry for the new mapped interrupt
is now set before map() callback is called for the controller.
- The irq_create_of_mapping() (also used by irq_of_parse_and_map()) function
for mapping interrupts from the device-tree now also call the separate
set_irq_type(), and only does so if there is a change in the trigger type.
- While I was at it, I changed pci_read_irq_line() (which is the helper I
would expect most archs to use in their pcibios_fixup() to get the PCI
interrupt routing from the device tree) to also handle a fallback when the
DT mapping fails consisting of reading the PCI_INTERRUPT_PIN to know wether
the device has an interrupt at all, and the the PCI_INTERRUPT_LINE to get an
interrupt number from the device. That number is then mapped using the
default controller, and the trigger is set to level low. That default
behaviour works for several platforms that don't have a proper interrupt
tree like Pegasos. If it doesn't work for your platform, then either
provide a proper interrupt tree from the firmware so that fallback isn't
needed, or don't call pci_read_irq_line()
- Add back a bit that got dropped by my main rework patch for properly
clearing pending IPIs on pSeries when using a kexec
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-10 11:44:42 +00:00
|
|
|
virq = irq_create_mapping(NULL, line);
|
|
|
|
if (virq != NO_IRQ)
|
|
|
|
set_irq_type(virq, IRQ_TYPE_LEVEL_LOW);
|
|
|
|
} else {
|
|
|
|
DBG(" -> got one, spec %d cells (0x%08x...) on %s\n",
|
|
|
|
oirq.size, oirq.specifier[0], oirq.controller->full_name);
|
2006-07-03 11:36:01 +00:00
|
|
|
|
[PATCH] powerpc: fix trigger handling in the new irq code
This patch slightly reworks the new irq code to fix a small design error. I
removed the passing of the trigger to the map() calls entirely, it was not a
good idea to have one call do two different things. It also fixes a couple of
corner cases.
Mapping a linux virtual irq to a physical irq now does only that. Setting the
trigger is a different action which has a different call.
The main changes are:
- I no longer call host->ops->map() for an already mapped irq, I just return
the virtual number that was already mapped. It was called before to give an
opportunity to change the trigger, but that was causing issues as that could
happen while the interrupt was in use by a device, and because of the
trigger change, map would potentially muck around with things in a racy way.
That was causing much burden on a given's controller implementation of
map() to get it right. This is much simpler now. map() is only called on
the initial mapping of an irq, meaning that you know that this irq is _not_
being used. You can initialize the hardware if you want (though you don't
have to).
- Controllers that can handle different type of triggers (level/edge/etc...)
now implement the standard irq_chip->set_type() call as defined by the
generic code. That means that you can use the standard set_irq_type() to
configure an irq line manually if you wish or (though I don't like that
interface), pass explicit trigger flags to request_irq() as defined by the
generic kernel interfaces. Also, using those interfaces guarantees that
your controller set_type callback is called with the descriptor lock held,
thus providing locking against activity on the same interrupt (including
mask/unmask/etc...) automatically. A result is that, for example, MPIC's
own map() implementation calls irq_set_type(NONE) to configure the hardware
to the default triggers.
- To allow the above, the irq_map array entry for the new mapped interrupt
is now set before map() callback is called for the controller.
- The irq_create_of_mapping() (also used by irq_of_parse_and_map()) function
for mapping interrupts from the device-tree now also call the separate
set_irq_type(), and only does so if there is a change in the trigger type.
- While I was at it, I changed pci_read_irq_line() (which is the helper I
would expect most archs to use in their pcibios_fixup() to get the PCI
interrupt routing from the device tree) to also handle a fallback when the
DT mapping fails consisting of reading the PCI_INTERRUPT_PIN to know wether
the device has an interrupt at all, and the the PCI_INTERRUPT_LINE to get an
interrupt number from the device. That number is then mapped using the
default controller, and the trigger is set to level low. That default
behaviour works for several platforms that don't have a proper interrupt
tree like Pegasos. If it doesn't work for your platform, then either
provide a proper interrupt tree from the firmware so that fallback isn't
needed, or don't call pci_read_irq_line()
- Add back a bit that got dropped by my main rework patch for properly
clearing pending IPIs on pSeries when using a kexec
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-10 11:44:42 +00:00
|
|
|
virq = irq_create_of_mapping(oirq.controller, oirq.specifier,
|
|
|
|
oirq.size);
|
|
|
|
}
|
2006-07-03 11:36:01 +00:00
|
|
|
if(virq == NO_IRQ) {
|
|
|
|
DBG(" -> failed to map !\n");
|
|
|
|
return -1;
|
|
|
|
}
|
|
|
|
pci_dev->irq = virq;
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
EXPORT_SYMBOL(pci_read_irq_line);
|
|
|
|
#endif /* CONFIG_PPC_MERGE */
|
|
|
|
|
2006-01-15 11:05:47 +00:00
|
|
|
int pcibios_enable_device(struct pci_dev *dev, int mask)
|
|
|
|
{
|
|
|
|
u16 cmd, old_cmd;
|
|
|
|
int idx;
|
|
|
|
struct resource *r;
|
|
|
|
|
|
|
|
if (ppc_md.pcibios_enable_device_hook)
|
|
|
|
if (ppc_md.pcibios_enable_device_hook(dev, 0))
|
|
|
|
return -EINVAL;
|
|
|
|
|
|
|
|
pci_read_config_word(dev, PCI_COMMAND, &cmd);
|
|
|
|
old_cmd = cmd;
|
|
|
|
for (idx=0; idx<6; idx++) {
|
|
|
|
r = &dev->resource[idx];
|
|
|
|
if (r->flags & IORESOURCE_UNSET) {
|
|
|
|
printk(KERN_ERR "PCI: Device %s not available because of resource collisions\n", pci_name(dev));
|
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
if (r->flags & IORESOURCE_IO)
|
|
|
|
cmd |= PCI_COMMAND_IO;
|
|
|
|
if (r->flags & IORESOURCE_MEM)
|
|
|
|
cmd |= PCI_COMMAND_MEMORY;
|
|
|
|
}
|
|
|
|
if (cmd != old_cmd) {
|
|
|
|
printk("PCI: Enabling device %s (%04x -> %04x)\n",
|
|
|
|
pci_name(dev), old_cmd, cmd);
|
|
|
|
pci_write_config_word(dev, PCI_COMMAND, cmd);
|
|
|
|
}
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
struct pci_controller*
|
|
|
|
pci_bus_to_hose(int bus)
|
|
|
|
{
|
|
|
|
struct pci_controller* hose = hose_head;
|
|
|
|
|
|
|
|
for (; hose; hose = hose->next)
|
|
|
|
if (bus >= hose->first_busno && bus <= hose->last_busno)
|
|
|
|
return hose;
|
|
|
|
return NULL;
|
|
|
|
}
|
|
|
|
|
|
|
|
void __iomem *
|
|
|
|
pci_bus_io_base(unsigned int bus)
|
|
|
|
{
|
|
|
|
struct pci_controller *hose;
|
|
|
|
|
|
|
|
hose = pci_bus_to_hose(bus);
|
|
|
|
if (!hose)
|
|
|
|
return NULL;
|
|
|
|
return hose->io_base_virt;
|
|
|
|
}
|
|
|
|
|
|
|
|
unsigned long
|
|
|
|
pci_bus_io_base_phys(unsigned int bus)
|
|
|
|
{
|
|
|
|
struct pci_controller *hose;
|
|
|
|
|
|
|
|
hose = pci_bus_to_hose(bus);
|
|
|
|
if (!hose)
|
|
|
|
return 0;
|
|
|
|
return hose->io_base_phys;
|
|
|
|
}
|
|
|
|
|
|
|
|
unsigned long
|
|
|
|
pci_bus_mem_base_phys(unsigned int bus)
|
|
|
|
{
|
|
|
|
struct pci_controller *hose;
|
|
|
|
|
|
|
|
hose = pci_bus_to_hose(bus);
|
|
|
|
if (!hose)
|
|
|
|
return 0;
|
|
|
|
return hose->pci_mem_offset;
|
|
|
|
}
|
|
|
|
|
|
|
|
unsigned long
|
|
|
|
pci_resource_to_bus(struct pci_dev *pdev, struct resource *res)
|
|
|
|
{
|
|
|
|
/* Hack alert again ! See comments in chrp_pci.c
|
|
|
|
*/
|
|
|
|
struct pci_controller* hose =
|
|
|
|
(struct pci_controller *)pdev->sysdata;
|
|
|
|
if (hose && res->flags & IORESOURCE_MEM)
|
|
|
|
return res->start - hose->pci_mem_offset;
|
|
|
|
/* We may want to do something with IOs here... */
|
|
|
|
return res->start;
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
static struct resource *__pci_mmap_make_offset(struct pci_dev *dev,
|
2006-12-08 06:14:33 +00:00
|
|
|
resource_size_t *offset,
|
2006-01-15 11:05:47 +00:00
|
|
|
enum pci_mmap_state mmap_state)
|
|
|
|
{
|
|
|
|
struct pci_controller *hose = pci_bus_to_hose(dev->bus->number);
|
|
|
|
unsigned long io_offset = 0;
|
|
|
|
int i, res_bit;
|
|
|
|
|
|
|
|
if (hose == 0)
|
|
|
|
return NULL; /* should never happen */
|
|
|
|
|
|
|
|
/* If memory, add on the PCI bridge address offset */
|
|
|
|
if (mmap_state == pci_mmap_mem) {
|
2006-12-08 06:14:33 +00:00
|
|
|
#if 0 /* See comment in pci_resource_to_user() for why this is disabled */
|
2006-01-15 11:05:47 +00:00
|
|
|
*offset += hose->pci_mem_offset;
|
2006-12-08 06:14:33 +00:00
|
|
|
#endif
|
2006-01-15 11:05:47 +00:00
|
|
|
res_bit = IORESOURCE_MEM;
|
|
|
|
} else {
|
2006-11-12 22:27:39 +00:00
|
|
|
io_offset = hose->io_base_virt - (void __iomem *)_IO_BASE;
|
2006-01-15 11:05:47 +00:00
|
|
|
*offset += io_offset;
|
|
|
|
res_bit = IORESOURCE_IO;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Check that the offset requested corresponds to one of the
|
|
|
|
* resources of the device.
|
|
|
|
*/
|
|
|
|
for (i = 0; i <= PCI_ROM_RESOURCE; i++) {
|
|
|
|
struct resource *rp = &dev->resource[i];
|
|
|
|
int flags = rp->flags;
|
|
|
|
|
|
|
|
/* treat ROM as memory (should be already) */
|
|
|
|
if (i == PCI_ROM_RESOURCE)
|
|
|
|
flags |= IORESOURCE_MEM;
|
|
|
|
|
|
|
|
/* Active and same type? */
|
|
|
|
if ((flags & res_bit) == 0)
|
|
|
|
continue;
|
|
|
|
|
|
|
|
/* In the range of this resource? */
|
|
|
|
if (*offset < (rp->start & PAGE_MASK) || *offset > rp->end)
|
|
|
|
continue;
|
|
|
|
|
|
|
|
/* found it! construct the final physical address */
|
|
|
|
if (mmap_state == pci_mmap_io)
|
|
|
|
*offset += hose->io_base_phys - io_offset;
|
|
|
|
return rp;
|
|
|
|
}
|
|
|
|
|
|
|
|
return NULL;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Set vm_page_prot of VMA, as appropriate for this architecture, for a pci
|
|
|
|
* device mapping.
|
|
|
|
*/
|
|
|
|
static pgprot_t __pci_mmap_set_pgprot(struct pci_dev *dev, struct resource *rp,
|
|
|
|
pgprot_t protection,
|
|
|
|
enum pci_mmap_state mmap_state,
|
|
|
|
int write_combine)
|
|
|
|
{
|
|
|
|
unsigned long prot = pgprot_val(protection);
|
|
|
|
|
|
|
|
/* Write combine is always 0 on non-memory space mappings. On
|
|
|
|
* memory space, if the user didn't pass 1, we check for a
|
|
|
|
* "prefetchable" resource. This is a bit hackish, but we use
|
|
|
|
* this to workaround the inability of /sysfs to provide a write
|
|
|
|
* combine bit
|
|
|
|
*/
|
|
|
|
if (mmap_state != pci_mmap_mem)
|
|
|
|
write_combine = 0;
|
|
|
|
else if (write_combine == 0) {
|
|
|
|
if (rp->flags & IORESOURCE_PREFETCH)
|
|
|
|
write_combine = 1;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* XXX would be nice to have a way to ask for write-through */
|
|
|
|
prot |= _PAGE_NO_CACHE;
|
|
|
|
if (write_combine)
|
|
|
|
prot &= ~_PAGE_GUARDED;
|
|
|
|
else
|
|
|
|
prot |= _PAGE_GUARDED;
|
|
|
|
|
|
|
|
return __pgprot(prot);
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* This one is used by /dev/mem and fbdev who have no clue about the
|
|
|
|
* PCI device, it tries to find the PCI device first and calls the
|
|
|
|
* above routine
|
|
|
|
*/
|
|
|
|
pgprot_t pci_phys_mem_access_prot(struct file *file,
|
|
|
|
unsigned long pfn,
|
|
|
|
unsigned long size,
|
|
|
|
pgprot_t protection)
|
|
|
|
{
|
|
|
|
struct pci_dev *pdev = NULL;
|
|
|
|
struct resource *found = NULL;
|
|
|
|
unsigned long prot = pgprot_val(protection);
|
|
|
|
unsigned long offset = pfn << PAGE_SHIFT;
|
|
|
|
int i;
|
|
|
|
|
|
|
|
if (page_is_ram(pfn))
|
|
|
|
return prot;
|
|
|
|
|
|
|
|
prot |= _PAGE_NO_CACHE | _PAGE_GUARDED;
|
|
|
|
|
|
|
|
for_each_pci_dev(pdev) {
|
|
|
|
for (i = 0; i <= PCI_ROM_RESOURCE; i++) {
|
|
|
|
struct resource *rp = &pdev->resource[i];
|
|
|
|
int flags = rp->flags;
|
|
|
|
|
|
|
|
/* Active and same type? */
|
|
|
|
if ((flags & IORESOURCE_MEM) == 0)
|
|
|
|
continue;
|
|
|
|
/* In the range of this resource? */
|
|
|
|
if (offset < (rp->start & PAGE_MASK) ||
|
|
|
|
offset > rp->end)
|
|
|
|
continue;
|
|
|
|
found = rp;
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
if (found)
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
if (found) {
|
|
|
|
if (found->flags & IORESOURCE_PREFETCH)
|
|
|
|
prot &= ~_PAGE_GUARDED;
|
|
|
|
pci_dev_put(pdev);
|
|
|
|
}
|
|
|
|
|
|
|
|
DBG("non-PCI map for %lx, prot: %lx\n", offset, prot);
|
|
|
|
|
|
|
|
return __pgprot(prot);
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Perform the actual remap of the pages for a PCI device mapping, as
|
|
|
|
* appropriate for this architecture. The region in the process to map
|
|
|
|
* is described by vm_start and vm_end members of VMA, the base physical
|
|
|
|
* address is found in vm_pgoff.
|
|
|
|
* The pci device structure is provided so that architectures may make mapping
|
|
|
|
* decisions on a per-device or per-bus basis.
|
|
|
|
*
|
|
|
|
* Returns a negative error code on failure, zero on success.
|
|
|
|
*/
|
|
|
|
int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma,
|
|
|
|
enum pci_mmap_state mmap_state,
|
|
|
|
int write_combine)
|
|
|
|
{
|
2006-12-08 06:14:33 +00:00
|
|
|
resource_size_t offset = vma->vm_pgoff << PAGE_SHIFT;
|
2006-01-15 11:05:47 +00:00
|
|
|
struct resource *rp;
|
|
|
|
int ret;
|
|
|
|
|
|
|
|
rp = __pci_mmap_make_offset(dev, &offset, mmap_state);
|
|
|
|
if (rp == NULL)
|
|
|
|
return -EINVAL;
|
|
|
|
|
|
|
|
vma->vm_pgoff = offset >> PAGE_SHIFT;
|
|
|
|
vma->vm_page_prot = __pci_mmap_set_pgprot(dev, rp,
|
|
|
|
vma->vm_page_prot,
|
|
|
|
mmap_state, write_combine);
|
|
|
|
|
|
|
|
ret = remap_pfn_range(vma, vma->vm_start, vma->vm_pgoff,
|
|
|
|
vma->vm_end - vma->vm_start, vma->vm_page_prot);
|
|
|
|
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Obsolete functions. Should be removed once the symbios driver
|
|
|
|
* is fixed
|
|
|
|
*/
|
|
|
|
unsigned long
|
|
|
|
phys_to_bus(unsigned long pa)
|
|
|
|
{
|
|
|
|
struct pci_controller *hose;
|
|
|
|
int i;
|
|
|
|
|
|
|
|
for (hose = hose_head; hose; hose = hose->next) {
|
|
|
|
for (i = 0; i < 3; ++i) {
|
|
|
|
if (pa >= hose->mem_resources[i].start
|
|
|
|
&& pa <= hose->mem_resources[i].end) {
|
|
|
|
/*
|
|
|
|
* XXX the hose->pci_mem_offset really
|
|
|
|
* only applies to mem_resources[0].
|
|
|
|
* We need a way to store an offset for
|
|
|
|
* the others. -- paulus
|
|
|
|
*/
|
|
|
|
if (i == 0)
|
|
|
|
pa -= hose->pci_mem_offset;
|
|
|
|
return pa;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
}
|
|
|
|
/* hmmm, didn't find it */
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
unsigned long
|
|
|
|
pci_phys_to_bus(unsigned long pa, int busnr)
|
|
|
|
{
|
|
|
|
struct pci_controller* hose = pci_bus_to_hose(busnr);
|
|
|
|
if (!hose)
|
|
|
|
return pa;
|
|
|
|
return pa - hose->pci_mem_offset;
|
|
|
|
}
|
|
|
|
|
|
|
|
unsigned long
|
|
|
|
pci_bus_to_phys(unsigned int ba, int busnr)
|
|
|
|
{
|
|
|
|
struct pci_controller* hose = pci_bus_to_hose(busnr);
|
|
|
|
if (!hose)
|
|
|
|
return ba;
|
|
|
|
return ba + hose->pci_mem_offset;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Provide information on locations of various I/O regions in physical
|
|
|
|
* memory. Do this on a per-card basis so that we choose the right
|
|
|
|
* root bridge.
|
|
|
|
* Note that the returned IO or memory base is a physical address
|
|
|
|
*/
|
|
|
|
|
|
|
|
long sys_pciconfig_iobase(long which, unsigned long bus, unsigned long devfn)
|
|
|
|
{
|
|
|
|
struct pci_controller* hose;
|
|
|
|
long result = -EOPNOTSUPP;
|
|
|
|
|
|
|
|
/* Argh ! Please forgive me for that hack, but that's the
|
|
|
|
* simplest way to get existing XFree to not lockup on some
|
|
|
|
* G5 machines... So when something asks for bus 0 io base
|
|
|
|
* (bus 0 is HT root), we return the AGP one instead.
|
|
|
|
*/
|
|
|
|
#ifdef CONFIG_PPC_PMAC
|
2006-03-28 12:15:54 +00:00
|
|
|
if (machine_is(powermac) && machine_is_compatible("MacRISC4"))
|
2006-01-15 11:05:47 +00:00
|
|
|
if (bus == 0)
|
|
|
|
bus = 0xf0;
|
|
|
|
#endif /* CONFIG_PPC_PMAC */
|
|
|
|
|
|
|
|
hose = pci_bus_to_hose(bus);
|
|
|
|
if (!hose)
|
|
|
|
return -ENODEV;
|
|
|
|
|
|
|
|
switch (which) {
|
|
|
|
case IOBASE_BRIDGE_NUMBER:
|
|
|
|
return (long)hose->first_busno;
|
|
|
|
case IOBASE_MEMORY:
|
|
|
|
return (long)hose->pci_mem_offset;
|
|
|
|
case IOBASE_IO:
|
|
|
|
return (long)hose->io_base_phys;
|
|
|
|
case IOBASE_ISA_IO:
|
|
|
|
return (long)isa_io_base;
|
|
|
|
case IOBASE_ISA_MEM:
|
|
|
|
return (long)isa_mem_base;
|
|
|
|
}
|
|
|
|
|
|
|
|
return result;
|
|
|
|
}
|
|
|
|
|
|
|
|
void pci_resource_to_user(const struct pci_dev *dev, int bar,
|
|
|
|
const struct resource *rsrc,
|
2006-06-13 00:06:02 +00:00
|
|
|
resource_size_t *start, resource_size_t *end)
|
2006-01-15 11:05:47 +00:00
|
|
|
{
|
|
|
|
struct pci_controller *hose = pci_bus_to_hose(dev->bus->number);
|
2006-12-08 06:14:33 +00:00
|
|
|
resource_size_t offset = 0;
|
2006-01-15 11:05:47 +00:00
|
|
|
|
|
|
|
if (hose == NULL)
|
|
|
|
return;
|
|
|
|
|
|
|
|
if (rsrc->flags & IORESOURCE_IO)
|
2006-12-08 06:14:33 +00:00
|
|
|
offset = (unsigned long)hose->io_base_virt - _IO_BASE;
|
|
|
|
|
|
|
|
/* We pass a fully fixed up address to userland for MMIO instead of
|
|
|
|
* a BAR value because X is lame and expects to be able to use that
|
|
|
|
* to pass to /dev/mem !
|
|
|
|
*
|
|
|
|
* That means that we'll have potentially 64 bits values where some
|
|
|
|
* userland apps only expect 32 (like X itself since it thinks only
|
|
|
|
* Sparc has 64 bits MMIO) but if we don't do that, we break it on
|
|
|
|
* 32 bits CHRPs :-(
|
|
|
|
*
|
|
|
|
* Hopefully, the sysfs insterface is immune to that gunk. Once X
|
|
|
|
* has been fixed (and the fix spread enough), we can re-enable the
|
|
|
|
* 2 lines below and pass down a BAR value to userland. In that case
|
|
|
|
* we'll also have to re-enable the matching code in
|
|
|
|
* __pci_mmap_make_offset().
|
|
|
|
*
|
|
|
|
* BenH.
|
|
|
|
*/
|
|
|
|
#if 0
|
|
|
|
else if (rsrc->flags & IORESOURCE_MEM)
|
|
|
|
offset = hose->pci_mem_offset;
|
|
|
|
#endif
|
2006-01-15 11:05:47 +00:00
|
|
|
|
2006-12-08 06:14:33 +00:00
|
|
|
*start = rsrc->start - offset;
|
|
|
|
*end = rsrc->end - offset;
|
2006-01-15 11:05:47 +00:00
|
|
|
}
|
|
|
|
|
2006-12-08 06:14:33 +00:00
|
|
|
void __init pci_init_resource(struct resource *res, resource_size_t start,
|
|
|
|
resource_size_t end, int flags, char *name)
|
2006-01-15 11:05:47 +00:00
|
|
|
{
|
|
|
|
res->start = start;
|
|
|
|
res->end = end;
|
|
|
|
res->flags = flags;
|
|
|
|
res->name = name;
|
|
|
|
res->parent = NULL;
|
|
|
|
res->sibling = NULL;
|
|
|
|
res->child = NULL;
|
|
|
|
}
|
|
|
|
|
|
|
|
unsigned long pci_address_to_pio(phys_addr_t address)
|
|
|
|
{
|
|
|
|
struct pci_controller* hose = hose_head;
|
|
|
|
|
|
|
|
for (; hose; hose = hose->next) {
|
|
|
|
unsigned int size = hose->io_resource.end -
|
|
|
|
hose->io_resource.start + 1;
|
|
|
|
if (address >= hose->io_base_phys &&
|
|
|
|
address < (hose->io_base_phys + size)) {
|
|
|
|
unsigned long base =
|
|
|
|
(unsigned long)hose->io_base_virt - _IO_BASE;
|
|
|
|
return base + (address - hose->io_base_phys);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
return (unsigned int)-1;
|
|
|
|
}
|
|
|
|
EXPORT_SYMBOL(pci_address_to_pio);
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Null PCI config access functions, for the case when we can't
|
|
|
|
* find a hose.
|
|
|
|
*/
|
|
|
|
#define NULL_PCI_OP(rw, size, type) \
|
|
|
|
static int \
|
|
|
|
null_##rw##_config_##size(struct pci_dev *dev, int offset, type val) \
|
|
|
|
{ \
|
|
|
|
return PCIBIOS_DEVICE_NOT_FOUND; \
|
|
|
|
}
|
|
|
|
|
|
|
|
static int
|
|
|
|
null_read_config(struct pci_bus *bus, unsigned int devfn, int offset,
|
|
|
|
int len, u32 *val)
|
|
|
|
{
|
|
|
|
return PCIBIOS_DEVICE_NOT_FOUND;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int
|
|
|
|
null_write_config(struct pci_bus *bus, unsigned int devfn, int offset,
|
|
|
|
int len, u32 val)
|
|
|
|
{
|
|
|
|
return PCIBIOS_DEVICE_NOT_FOUND;
|
|
|
|
}
|
|
|
|
|
|
|
|
static struct pci_ops null_pci_ops =
|
|
|
|
{
|
|
|
|
null_read_config,
|
|
|
|
null_write_config
|
|
|
|
};
|
|
|
|
|
|
|
|
/*
|
|
|
|
* These functions are used early on before PCI scanning is done
|
|
|
|
* and all of the pci_dev and pci_bus structures have been created.
|
|
|
|
*/
|
|
|
|
static struct pci_bus *
|
|
|
|
fake_pci_bus(struct pci_controller *hose, int busnr)
|
|
|
|
{
|
|
|
|
static struct pci_bus bus;
|
|
|
|
|
|
|
|
if (hose == 0) {
|
|
|
|
hose = pci_bus_to_hose(busnr);
|
|
|
|
if (hose == 0)
|
|
|
|
printk(KERN_ERR "Can't find hose for PCI bus %d!\n", busnr);
|
|
|
|
}
|
|
|
|
bus.number = busnr;
|
|
|
|
bus.sysdata = hose;
|
|
|
|
bus.ops = hose? hose->ops: &null_pci_ops;
|
|
|
|
return &bus;
|
|
|
|
}
|
|
|
|
|
|
|
|
#define EARLY_PCI_OP(rw, size, type) \
|
|
|
|
int early_##rw##_config_##size(struct pci_controller *hose, int bus, \
|
|
|
|
int devfn, int offset, type value) \
|
|
|
|
{ \
|
|
|
|
return pci_bus_##rw##_config_##size(fake_pci_bus(hose, bus), \
|
|
|
|
devfn, offset, value); \
|
|
|
|
}
|
|
|
|
|
|
|
|
EARLY_PCI_OP(read, byte, u8 *)
|
|
|
|
EARLY_PCI_OP(read, word, u16 *)
|
|
|
|
EARLY_PCI_OP(read, dword, u32 *)
|
|
|
|
EARLY_PCI_OP(write, byte, u8)
|
|
|
|
EARLY_PCI_OP(write, word, u16)
|
|
|
|
EARLY_PCI_OP(write, dword, u32)
|