linux/net/bridge/br_if.c

787 lines
18 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0-or-later
/*
* Userspace interface
* Linux ethernet bridge
*
* Authors:
* Lennert Buytenhek <buytenh@gnu.org>
*/
#include <linux/kernel.h>
#include <linux/netdevice.h>
#include <linux/etherdevice.h>
#include <linux/netpoll.h>
#include <linux/ethtool.h>
#include <linux/if_arp.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/rtnetlink.h>
#include <linux/if_ether.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 08:04:11 +00:00
#include <linux/slab.h>
#include <net/dsa.h>
#include <net/sock.h>
#include <linux/if_vlan.h>
#include <net/switchdev.h>
#include <net/net_namespace.h>
#include "br_private.h"
/*
* Determine initial path cost based on speed.
* using recommendations from 802.1d standard
*
* Since driver might sleep need to not be holding any locks.
*/
static int port_cost(struct net_device *dev)
{
struct ethtool_link_ksettings ecmd;
if (!__ethtool_get_link_ksettings(dev, &ecmd)) {
switch (ecmd.base.speed) {
case SPEED_10000:
return 2;
case SPEED_1000:
return 4;
case SPEED_100:
return 19;
case SPEED_10:
return 100;
}
}
/* Old silly heuristics based on name */
if (!strncmp(dev->name, "lec", 3))
return 7;
if (!strncmp(dev->name, "plip", 4))
return 2500;
return 100; /* assume old 10Mbps */
}
/* Check for port carrier transitions. */
void br_port_carrier_check(struct net_bridge_port *p, bool *notified)
{
struct net_device *dev = p->dev;
struct net_bridge *br = p->br;
if (!(p->flags & BR_ADMIN_COST) &&
netif_running(dev) && netif_oper_up(dev))
p->path_cost = port_cost(dev);
*notified = false;
if (!netif_running(br->dev))
return;
spin_lock_bh(&br->lock);
if (netif_running(dev) && netif_oper_up(dev)) {
if (p->state == BR_STATE_DISABLED) {
br_stp_enable_port(p);
*notified = true;
}
} else {
if (p->state != BR_STATE_DISABLED) {
br_stp_disable_port(p);
*notified = true;
}
}
spin_unlock_bh(&br->lock);
}
bridge: Automatically manage port promiscuous mode. There exist configurations where the administrator or another management entity has the foreknowledge of all the mac addresses of end systems that are being bridged together. In these environments, the administrator can statically configure known addresses in the bridge FDB and disable flooding and learning on ports. This makes it possible to turn off promiscuous mode on the interfaces connected to the bridge. Here is why disabling flooding and learning allows us to control promiscuity: Consider port X. All traffic coming into this port from outside the bridge (ingress) will be either forwarded through other ports of the bridge (egress) or dropped. Forwarding (egress) is defined by FDB entries and by flooding in the event that no FDB entry exists. In the event that flooding is disabled, only FDB entries define the egress. Once learning is disabled, only static FDB entries provided by a management entity define the egress. If we provide information from these static FDBs to the ingress port X, then we'll be able to accept all traffic that can be successfully forwarded and drop all the other traffic sooner without spending CPU cycles to process it. Another way to define the above is as following equations: ingress = egress + drop expanding egress ingress = static FDB + learned FDB + flooding + drop disabling flooding and learning we a left with ingress = static FDB + drop By adding addresses from the static FDB entries to the MAC address filter of an ingress port X, we fully define what the bridge can process without dropping and can thus turn off promiscuous mode, thus dropping packets sooner. There have been suggestions that we may want to allow learning and update the filters with learned addresses as well. This would require mac-level authentication similar to 802.1x to prevent attacks against the hw filters as they are limited resource. Additionally, if the user places the bridge device in promiscuous mode, all ports are placed in promiscuous mode regardless of the changes to flooding and learning. Since the above functionality depends on full static configuration, we have also require that vlan filtering be enabled to take advantage of this. The reason is that the bridge has to be able to receive and process VLAN-tagged frames and the there are only 2 ways to accomplish this right now: promiscuous mode or vlan filtering. Suggested-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-16 13:59:20 +00:00
static void br_port_set_promisc(struct net_bridge_port *p)
{
int err = 0;
if (br_promisc_port(p))
return;
err = dev_set_promiscuity(p->dev, 1);
if (err)
return;
br_fdb_unsync_static(p->br, p);
p->flags |= BR_PROMISC;
}
static void br_port_clear_promisc(struct net_bridge_port *p)
{
int err;
/* Check if the port is already non-promisc or if it doesn't
* support UNICAST filtering. Without unicast filtering support
* we'll end up re-enabling promisc mode anyway, so just check for
* it here.
*/
if (!br_promisc_port(p) || !(p->dev->priv_flags & IFF_UNICAST_FLT))
return;
/* Since we'll be clearing the promisc mode, program the port
* first so that we don't have interruption in traffic.
*/
err = br_fdb_sync_static(p->br, p);
if (err)
return;
dev_set_promiscuity(p->dev, -1);
p->flags &= ~BR_PROMISC;
}
/* When a port is added or removed or when certain port flags
* change, this function is called to automatically manage
* promiscuity setting of all the bridge ports. We are always called
* under RTNL so can skip using rcu primitives.
*/
void br_manage_promisc(struct net_bridge *br)
{
struct net_bridge_port *p;
bool set_all = false;
/* If vlan filtering is disabled or bridge interface is placed
* into promiscuous mode, place all ports in promiscuous mode.
*/
if ((br->dev->flags & IFF_PROMISC) || !br_vlan_enabled(br->dev))
bridge: Automatically manage port promiscuous mode. There exist configurations where the administrator or another management entity has the foreknowledge of all the mac addresses of end systems that are being bridged together. In these environments, the administrator can statically configure known addresses in the bridge FDB and disable flooding and learning on ports. This makes it possible to turn off promiscuous mode on the interfaces connected to the bridge. Here is why disabling flooding and learning allows us to control promiscuity: Consider port X. All traffic coming into this port from outside the bridge (ingress) will be either forwarded through other ports of the bridge (egress) or dropped. Forwarding (egress) is defined by FDB entries and by flooding in the event that no FDB entry exists. In the event that flooding is disabled, only FDB entries define the egress. Once learning is disabled, only static FDB entries provided by a management entity define the egress. If we provide information from these static FDBs to the ingress port X, then we'll be able to accept all traffic that can be successfully forwarded and drop all the other traffic sooner without spending CPU cycles to process it. Another way to define the above is as following equations: ingress = egress + drop expanding egress ingress = static FDB + learned FDB + flooding + drop disabling flooding and learning we a left with ingress = static FDB + drop By adding addresses from the static FDB entries to the MAC address filter of an ingress port X, we fully define what the bridge can process without dropping and can thus turn off promiscuous mode, thus dropping packets sooner. There have been suggestions that we may want to allow learning and update the filters with learned addresses as well. This would require mac-level authentication similar to 802.1x to prevent attacks against the hw filters as they are limited resource. Additionally, if the user places the bridge device in promiscuous mode, all ports are placed in promiscuous mode regardless of the changes to flooding and learning. Since the above functionality depends on full static configuration, we have also require that vlan filtering be enabled to take advantage of this. The reason is that the bridge has to be able to receive and process VLAN-tagged frames and the there are only 2 ways to accomplish this right now: promiscuous mode or vlan filtering. Suggested-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-16 13:59:20 +00:00
set_all = true;
list_for_each_entry(p, &br->port_list, list) {
if (set_all) {
br_port_set_promisc(p);
} else {
/* If the number of auto-ports is <= 1, then all other
* ports will have their output configuration
* statically specified through fdbs. Since ingress
* on the auto-port becomes forwarding/egress to other
* ports and egress configuration is statically known,
* we can say that ingress configuration of the
* auto-port is also statically known.
* This lets us disable promiscuous mode and write
* this config to hw.
*/
if (br->auto_cnt == 0 ||
(br->auto_cnt == 1 && br_auto_port(p)))
bridge: Automatically manage port promiscuous mode. There exist configurations where the administrator or another management entity has the foreknowledge of all the mac addresses of end systems that are being bridged together. In these environments, the administrator can statically configure known addresses in the bridge FDB and disable flooding and learning on ports. This makes it possible to turn off promiscuous mode on the interfaces connected to the bridge. Here is why disabling flooding and learning allows us to control promiscuity: Consider port X. All traffic coming into this port from outside the bridge (ingress) will be either forwarded through other ports of the bridge (egress) or dropped. Forwarding (egress) is defined by FDB entries and by flooding in the event that no FDB entry exists. In the event that flooding is disabled, only FDB entries define the egress. Once learning is disabled, only static FDB entries provided by a management entity define the egress. If we provide information from these static FDBs to the ingress port X, then we'll be able to accept all traffic that can be successfully forwarded and drop all the other traffic sooner without spending CPU cycles to process it. Another way to define the above is as following equations: ingress = egress + drop expanding egress ingress = static FDB + learned FDB + flooding + drop disabling flooding and learning we a left with ingress = static FDB + drop By adding addresses from the static FDB entries to the MAC address filter of an ingress port X, we fully define what the bridge can process without dropping and can thus turn off promiscuous mode, thus dropping packets sooner. There have been suggestions that we may want to allow learning and update the filters with learned addresses as well. This would require mac-level authentication similar to 802.1x to prevent attacks against the hw filters as they are limited resource. Additionally, if the user places the bridge device in promiscuous mode, all ports are placed in promiscuous mode regardless of the changes to flooding and learning. Since the above functionality depends on full static configuration, we have also require that vlan filtering be enabled to take advantage of this. The reason is that the bridge has to be able to receive and process VLAN-tagged frames and the there are only 2 ways to accomplish this right now: promiscuous mode or vlan filtering. Suggested-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-16 13:59:20 +00:00
br_port_clear_promisc(p);
else
br_port_set_promisc(p);
}
}
}
net: bridge: add support for backup port This patch adds a new port attribute - IFLA_BRPORT_BACKUP_PORT, which allows to set a backup port to be used for known unicast traffic if the port has gone carrier down. The backup pointer is rcu protected and set only under RTNL, a counter is maintained so when deleting a port we know how many other ports reference it as a backup and we remove it from all. Also the pointer is in the first cache line which is hot at the time of the check and thus in the common case we only add one more test. The backup port will be used only for the non-flooding case since it's a part of the bridge and the flooded packets will be forwarded to it anyway. To remove the forwarding just send a 0/non-existing backup port. This is used to avoid numerous scalability problems when using MLAG most notably if we have thousands of fdbs one would need to change all of them on port carrier going down which takes too long and causes a storm of fdb notifications (and again when the port comes back up). In a Multi-chassis Link Aggregation setup usually hosts are connected to two different switches which act as a single logical switch. Those switches usually have a control and backup link between them called peerlink which might be used for communication in case a host loses connectivity to one of them. We need a fast way to failover in case a host port goes down and currently none of the solutions (like bond) cannot fulfill the requirements because the participating ports are actually the "master" devices and must have the same peerlink as their backup interface and at the same time all of them must participate in the bridge device. As Roopa noted it's normal practice in routing called fast re-route where a precalculated backup path is used when the main one is down. Another use case of this is with EVPN, having a single vxlan device which is backup of every port. Due to the nature of master devices it's not currently possible to use one device as a backup for many and still have all of them participate in the bridge (which is master itself). More detailed information about MLAG is available at the link below. https://docs.cumulusnetworks.com/display/DOCS/Multi-Chassis+Link+Aggregation+-+MLAG Further explanation and a diagram by Roopa: Two switches acting in a MLAG pair are connected by the peerlink interface which is a bridge port. the config on one of the switches looks like the below. The other switch also has a similar config. eth0 is connected to one port on the server. And the server is connected to both switches. br0 -- team0---eth0 | -- switch-peerlink Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-23 08:16:59 +00:00
int nbp_backup_change(struct net_bridge_port *p,
struct net_device *backup_dev)
{
struct net_bridge_port *old_backup = rtnl_dereference(p->backup_port);
struct net_bridge_port *backup_p = NULL;
ASSERT_RTNL();
if (backup_dev) {
if (!netif_is_bridge_port(backup_dev))
net: bridge: add support for backup port This patch adds a new port attribute - IFLA_BRPORT_BACKUP_PORT, which allows to set a backup port to be used for known unicast traffic if the port has gone carrier down. The backup pointer is rcu protected and set only under RTNL, a counter is maintained so when deleting a port we know how many other ports reference it as a backup and we remove it from all. Also the pointer is in the first cache line which is hot at the time of the check and thus in the common case we only add one more test. The backup port will be used only for the non-flooding case since it's a part of the bridge and the flooded packets will be forwarded to it anyway. To remove the forwarding just send a 0/non-existing backup port. This is used to avoid numerous scalability problems when using MLAG most notably if we have thousands of fdbs one would need to change all of them on port carrier going down which takes too long and causes a storm of fdb notifications (and again when the port comes back up). In a Multi-chassis Link Aggregation setup usually hosts are connected to two different switches which act as a single logical switch. Those switches usually have a control and backup link between them called peerlink which might be used for communication in case a host loses connectivity to one of them. We need a fast way to failover in case a host port goes down and currently none of the solutions (like bond) cannot fulfill the requirements because the participating ports are actually the "master" devices and must have the same peerlink as their backup interface and at the same time all of them must participate in the bridge device. As Roopa noted it's normal practice in routing called fast re-route where a precalculated backup path is used when the main one is down. Another use case of this is with EVPN, having a single vxlan device which is backup of every port. Due to the nature of master devices it's not currently possible to use one device as a backup for many and still have all of them participate in the bridge (which is master itself). More detailed information about MLAG is available at the link below. https://docs.cumulusnetworks.com/display/DOCS/Multi-Chassis+Link+Aggregation+-+MLAG Further explanation and a diagram by Roopa: Two switches acting in a MLAG pair are connected by the peerlink interface which is a bridge port. the config on one of the switches looks like the below. The other switch also has a similar config. eth0 is connected to one port on the server. And the server is connected to both switches. br0 -- team0---eth0 | -- switch-peerlink Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-23 08:16:59 +00:00
return -ENOENT;
backup_p = br_port_get_rtnl(backup_dev);
if (backup_p->br != p->br)
return -EINVAL;
}
if (p == backup_p)
return -EINVAL;
if (old_backup == backup_p)
return 0;
/* if the backup link is already set, clear it */
if (old_backup)
old_backup->backup_redirected_cnt--;
if (backup_p)
backup_p->backup_redirected_cnt++;
rcu_assign_pointer(p->backup_port, backup_p);
return 0;
}
static void nbp_backup_clear(struct net_bridge_port *p)
{
nbp_backup_change(p, NULL);
if (p->backup_redirected_cnt) {
struct net_bridge_port *cur_p;
list_for_each_entry(cur_p, &p->br->port_list, list) {
struct net_bridge_port *backup_p;
backup_p = rtnl_dereference(cur_p->backup_port);
if (backup_p == p)
nbp_backup_change(cur_p, NULL);
}
}
WARN_ON(rcu_access_pointer(p->backup_port) || p->backup_redirected_cnt);
}
static void nbp_update_port_count(struct net_bridge *br)
{
struct net_bridge_port *p;
u32 cnt = 0;
list_for_each_entry(p, &br->port_list, list) {
if (br_auto_port(p))
cnt++;
}
bridge: Automatically manage port promiscuous mode. There exist configurations where the administrator or another management entity has the foreknowledge of all the mac addresses of end systems that are being bridged together. In these environments, the administrator can statically configure known addresses in the bridge FDB and disable flooding and learning on ports. This makes it possible to turn off promiscuous mode on the interfaces connected to the bridge. Here is why disabling flooding and learning allows us to control promiscuity: Consider port X. All traffic coming into this port from outside the bridge (ingress) will be either forwarded through other ports of the bridge (egress) or dropped. Forwarding (egress) is defined by FDB entries and by flooding in the event that no FDB entry exists. In the event that flooding is disabled, only FDB entries define the egress. Once learning is disabled, only static FDB entries provided by a management entity define the egress. If we provide information from these static FDBs to the ingress port X, then we'll be able to accept all traffic that can be successfully forwarded and drop all the other traffic sooner without spending CPU cycles to process it. Another way to define the above is as following equations: ingress = egress + drop expanding egress ingress = static FDB + learned FDB + flooding + drop disabling flooding and learning we a left with ingress = static FDB + drop By adding addresses from the static FDB entries to the MAC address filter of an ingress port X, we fully define what the bridge can process without dropping and can thus turn off promiscuous mode, thus dropping packets sooner. There have been suggestions that we may want to allow learning and update the filters with learned addresses as well. This would require mac-level authentication similar to 802.1x to prevent attacks against the hw filters as they are limited resource. Additionally, if the user places the bridge device in promiscuous mode, all ports are placed in promiscuous mode regardless of the changes to flooding and learning. Since the above functionality depends on full static configuration, we have also require that vlan filtering be enabled to take advantage of this. The reason is that the bridge has to be able to receive and process VLAN-tagged frames and the there are only 2 ways to accomplish this right now: promiscuous mode or vlan filtering. Suggested-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-16 13:59:20 +00:00
if (br->auto_cnt != cnt) {
br->auto_cnt = cnt;
br_manage_promisc(br);
}
}
static void nbp_delete_promisc(struct net_bridge_port *p)
{
/* If port is currently promiscuous, unset promiscuity.
bridge: Automatically manage port promiscuous mode. There exist configurations where the administrator or another management entity has the foreknowledge of all the mac addresses of end systems that are being bridged together. In these environments, the administrator can statically configure known addresses in the bridge FDB and disable flooding and learning on ports. This makes it possible to turn off promiscuous mode on the interfaces connected to the bridge. Here is why disabling flooding and learning allows us to control promiscuity: Consider port X. All traffic coming into this port from outside the bridge (ingress) will be either forwarded through other ports of the bridge (egress) or dropped. Forwarding (egress) is defined by FDB entries and by flooding in the event that no FDB entry exists. In the event that flooding is disabled, only FDB entries define the egress. Once learning is disabled, only static FDB entries provided by a management entity define the egress. If we provide information from these static FDBs to the ingress port X, then we'll be able to accept all traffic that can be successfully forwarded and drop all the other traffic sooner without spending CPU cycles to process it. Another way to define the above is as following equations: ingress = egress + drop expanding egress ingress = static FDB + learned FDB + flooding + drop disabling flooding and learning we a left with ingress = static FDB + drop By adding addresses from the static FDB entries to the MAC address filter of an ingress port X, we fully define what the bridge can process without dropping and can thus turn off promiscuous mode, thus dropping packets sooner. There have been suggestions that we may want to allow learning and update the filters with learned addresses as well. This would require mac-level authentication similar to 802.1x to prevent attacks against the hw filters as they are limited resource. Additionally, if the user places the bridge device in promiscuous mode, all ports are placed in promiscuous mode regardless of the changes to flooding and learning. Since the above functionality depends on full static configuration, we have also require that vlan filtering be enabled to take advantage of this. The reason is that the bridge has to be able to receive and process VLAN-tagged frames and the there are only 2 ways to accomplish this right now: promiscuous mode or vlan filtering. Suggested-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-16 13:59:20 +00:00
* Otherwise, it is a static port so remove all addresses
* from it.
*/
dev_set_allmulti(p->dev, -1);
if (br_promisc_port(p))
dev_set_promiscuity(p->dev, -1);
else
br_fdb_unsync_static(p->br, p);
}
static void release_nbp(struct kobject *kobj)
{
struct net_bridge_port *p
= container_of(kobj, struct net_bridge_port, kobj);
kfree(p);
}
static void brport_get_ownership(struct kobject *kobj, kuid_t *uid, kgid_t *gid)
{
struct net_bridge_port *p = kobj_to_brport(kobj);
net_ns_get_ownership(dev_net(p->dev), uid, gid);
}
static struct kobj_type brport_ktype = {
#ifdef CONFIG_SYSFS
.sysfs_ops = &brport_sysfs_ops,
#endif
.release = release_nbp,
.get_ownership = brport_get_ownership,
};
static void destroy_nbp(struct net_bridge_port *p)
{
struct net_device *dev = p->dev;
p->br = NULL;
p->dev = NULL;
dev_put_track(dev, &p->dev_tracker);
kobject_put(&p->kobj);
}
static void destroy_nbp_rcu(struct rcu_head *head)
{
struct net_bridge_port *p =
container_of(head, struct net_bridge_port, rcu);
destroy_nbp(p);
}
static unsigned get_max_headroom(struct net_bridge *br)
{
unsigned max_headroom = 0;
struct net_bridge_port *p;
list_for_each_entry(p, &br->port_list, list) {
unsigned dev_headroom = netdev_get_fwd_headroom(p->dev);
if (dev_headroom > max_headroom)
max_headroom = dev_headroom;
}
return max_headroom;
}
static void update_headroom(struct net_bridge *br, int new_hr)
{
struct net_bridge_port *p;
list_for_each_entry(p, &br->port_list, list)
netdev_set_rx_headroom(p->dev, new_hr);
br->dev->needed_headroom = new_hr;
}
/* Delete port(interface) from bridge is done in two steps.
* via RCU. First step, marks device as down. That deletes
* all the timers and stops new packets from flowing through.
*
* Final cleanup doesn't occur until after all CPU's finished
* processing packets.
*
* Protected from multiple admin operations by RTNL mutex
*/
static void del_nbp(struct net_bridge_port *p)
{
struct net_bridge *br = p->br;
struct net_device *dev = p->dev;
sysfs_remove_link(br->ifobj, p->dev->name);
bridge: Automatically manage port promiscuous mode. There exist configurations where the administrator or another management entity has the foreknowledge of all the mac addresses of end systems that are being bridged together. In these environments, the administrator can statically configure known addresses in the bridge FDB and disable flooding and learning on ports. This makes it possible to turn off promiscuous mode on the interfaces connected to the bridge. Here is why disabling flooding and learning allows us to control promiscuity: Consider port X. All traffic coming into this port from outside the bridge (ingress) will be either forwarded through other ports of the bridge (egress) or dropped. Forwarding (egress) is defined by FDB entries and by flooding in the event that no FDB entry exists. In the event that flooding is disabled, only FDB entries define the egress. Once learning is disabled, only static FDB entries provided by a management entity define the egress. If we provide information from these static FDBs to the ingress port X, then we'll be able to accept all traffic that can be successfully forwarded and drop all the other traffic sooner without spending CPU cycles to process it. Another way to define the above is as following equations: ingress = egress + drop expanding egress ingress = static FDB + learned FDB + flooding + drop disabling flooding and learning we a left with ingress = static FDB + drop By adding addresses from the static FDB entries to the MAC address filter of an ingress port X, we fully define what the bridge can process without dropping and can thus turn off promiscuous mode, thus dropping packets sooner. There have been suggestions that we may want to allow learning and update the filters with learned addresses as well. This would require mac-level authentication similar to 802.1x to prevent attacks against the hw filters as they are limited resource. Additionally, if the user places the bridge device in promiscuous mode, all ports are placed in promiscuous mode regardless of the changes to flooding and learning. Since the above functionality depends on full static configuration, we have also require that vlan filtering be enabled to take advantage of this. The reason is that the bridge has to be able to receive and process VLAN-tagged frames and the there are only 2 ways to accomplish this right now: promiscuous mode or vlan filtering. Suggested-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-16 13:59:20 +00:00
nbp_delete_promisc(p);
spin_lock_bh(&br->lock);
br_stp_disable_port(p);
spin_unlock_bh(&br->lock);
br_mrp_port_del(br, p);
bridge: cfm: Kernel space implementation of CFM. MEP create/delete. This is the first commit of the implementation of the CFM protocol according to 802.1Q section 12.14. It contains MEP instance create, delete and configuration. Connectivity Fault Management (CFM) comprises capabilities for detecting, verifying, and isolating connectivity failures in Virtual Bridged Networks. These capabilities can be used in networks operated by multiple independent organizations, each with restricted management access to each others equipment. CFM functions are partitioned as follows: - Path discovery - Fault detection - Fault verification and isolation - Fault notification - Fault recovery Interface consists of these functions: br_cfm_mep_create() br_cfm_mep_delete() br_cfm_mep_config_set() br_cfm_cc_config_set() br_cfm_cc_peer_mep_add() br_cfm_cc_peer_mep_remove() A MEP instance is created by br_cfm_mep_create() -It is the Maintenance association End Point described in 802.1Q section 19.2. -It is created on a specific level (1-7) and is assuring that no CFM frames are passing through this MEP on lower levels. -It initiates and validates CFM frames on its level. -It can only exist on a port that is related to a bridge. -Attributes given cannot be changed until the instance is deleted. A MEP instance can be deleted by br_cfm_mep_delete(). A created MEP instance has attributes that can be configured by br_cfm_mep_config_set(). A MEP Continuity Check feature can be configured by br_cfm_cc_config_set() The Continuity Check Receiver state machine can be enabled and disabled. According to 802.1Q section 19.2.8 A MEP can have Peer MEPs added and removed by br_cfm_cc_peer_mep_add() and br_cfm_cc_peer_mep_remove() The Continuity Check feature can maintain connectivity status on each added Peer MEP. Signed-off-by: Henrik Bjoernlund <henrik.bjoernlund@microchip.com> Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com> Acked-by: Nikolay Aleksandrov <nikolay@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-27 10:02:45 +00:00
br_cfm_port_del(br, p);
br_ifinfo_notify(RTM_DELLINK, NULL, p);
list_del_rcu(&p->list);
if (netdev_get_fwd_headroom(dev) == br->dev->needed_headroom)
update_headroom(br, get_max_headroom(br));
netdev_reset_rx_headroom(dev);
nbp_vlan_flush(p);
br_fdb_delete_by_port(br, p, 0, 1);
switchdev_deferred_process();
net: bridge: add support for backup port This patch adds a new port attribute - IFLA_BRPORT_BACKUP_PORT, which allows to set a backup port to be used for known unicast traffic if the port has gone carrier down. The backup pointer is rcu protected and set only under RTNL, a counter is maintained so when deleting a port we know how many other ports reference it as a backup and we remove it from all. Also the pointer is in the first cache line which is hot at the time of the check and thus in the common case we only add one more test. The backup port will be used only for the non-flooding case since it's a part of the bridge and the flooded packets will be forwarded to it anyway. To remove the forwarding just send a 0/non-existing backup port. This is used to avoid numerous scalability problems when using MLAG most notably if we have thousands of fdbs one would need to change all of them on port carrier going down which takes too long and causes a storm of fdb notifications (and again when the port comes back up). In a Multi-chassis Link Aggregation setup usually hosts are connected to two different switches which act as a single logical switch. Those switches usually have a control and backup link between them called peerlink which might be used for communication in case a host loses connectivity to one of them. We need a fast way to failover in case a host port goes down and currently none of the solutions (like bond) cannot fulfill the requirements because the participating ports are actually the "master" devices and must have the same peerlink as their backup interface and at the same time all of them must participate in the bridge device. As Roopa noted it's normal practice in routing called fast re-route where a precalculated backup path is used when the main one is down. Another use case of this is with EVPN, having a single vxlan device which is backup of every port. Due to the nature of master devices it's not currently possible to use one device as a backup for many and still have all of them participate in the bridge (which is master itself). More detailed information about MLAG is available at the link below. https://docs.cumulusnetworks.com/display/DOCS/Multi-Chassis+Link+Aggregation+-+MLAG Further explanation and a diagram by Roopa: Two switches acting in a MLAG pair are connected by the peerlink interface which is a bridge port. the config on one of the switches looks like the below. The other switch also has a similar config. eth0 is connected to one port on the server. And the server is connected to both switches. br0 -- team0---eth0 | -- switch-peerlink Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-23 08:16:59 +00:00
nbp_backup_clear(p);
nbp_update_port_count(br);
netdev_upper_dev_unlink(dev, br->dev);
dev->priv_flags &= ~IFF_BRIDGE_PORT;
netdev_rx_handler_unregister(dev);
br_multicast_del_port(p);
kobject_uevent(&p->kobj, KOBJ_REMOVE);
kobject_del(&p->kobj);
br_netpoll_disable(p);
call_rcu(&p->rcu, destroy_nbp_rcu);
}
/* Delete bridge device */
void br_dev_delete(struct net_device *dev, struct list_head *head)
{
struct net_bridge *br = netdev_priv(dev);
struct net_bridge_port *p, *n;
list_for_each_entry_safe(p, n, &br->port_list, list) {
del_nbp(p);
}
br_recalculate_neigh_suppress_enabled(br);
br_fdb_delete_by_port(br, NULL, 0, 1);
bridge: flush br's address entry in fdb when remove the bridge dev When the following commands are executed: brctl addbr br0 ifconfig br0 hw ether <addr> rmmod bridge The calltrace will occur: [ 563.312114] device eth1 left promiscuous mode [ 563.312188] br0: port 1(eth1) entered disabled state [ 563.468190] kmem_cache_destroy bridge_fdb_cache: Slab cache still has objects [ 563.468197] CPU: 6 PID: 6982 Comm: rmmod Tainted: G O 3.12.0-0.7-default+ #9 [ 563.468199] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2007 [ 563.468200] 0000000000000880 ffff88010f111e98 ffffffff814d1c92 ffff88010f111eb8 [ 563.468204] ffffffff81148efd ffff88010f111eb8 0000000000000000 ffff88010f111ec8 [ 563.468206] ffffffffa062a270 ffff88010f111ed8 ffffffffa063ac76 ffff88010f111f78 [ 563.468209] Call Trace: [ 563.468218] [<ffffffff814d1c92>] dump_stack+0x6a/0x78 [ 563.468234] [<ffffffff81148efd>] kmem_cache_destroy+0xfd/0x100 [ 563.468242] [<ffffffffa062a270>] br_fdb_fini+0x10/0x20 [bridge] [ 563.468247] [<ffffffffa063ac76>] br_deinit+0x4e/0x50 [bridge] [ 563.468254] [<ffffffff810c7dc9>] SyS_delete_module+0x199/0x2b0 [ 563.468259] [<ffffffff814e0922>] system_call_fastpath+0x16/0x1b [ 570.377958] Bridge firewalling registered --------------------------- cut here ------------------------------- The reason is that when the bridge dev's address is changed, the br_fdb_change_mac_address() will add new address in fdb, but when the bridge was removed, the address entry in the fdb did not free, the bridge_fdb_cache still has objects when destroy the cache, Fix this by flushing the bridge address entry when removing the bridge. v2: according to the Toshiaki Makita and Vlad's suggestion, I only delete the vlan0 entry, it still have a leak here if the vlan id is other number, so I need to call fdb_delete_by_port(br, NULL, 1) to flush all entries whose dst is NULL for the bridge. Suggested-by: Toshiaki Makita <toshiaki.makita1@gmail.com> Suggested-by: Vlad Yasevich <vyasevich@gmail.com> Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-07 14:12:05 +00:00
cancel_delayed_work_sync(&br->gc_work);
br_sysfs_delbr(br->dev);
unregister_netdevice_queue(br->dev, head);
}
/* find an available port number */
static int find_portno(struct net_bridge *br)
{
int index;
struct net_bridge_port *p;
unsigned long *inuse;
inuse = bitmap_zalloc(BR_MAX_PORTS, GFP_KERNEL);
if (!inuse)
return -ENOMEM;
__set_bit(0, inuse); /* zero is reserved */
list_for_each_entry(p, &br->port_list, list)
__set_bit(p->port_no, inuse);
index = find_first_zero_bit(inuse, BR_MAX_PORTS);
bitmap_free(inuse);
return (index >= BR_MAX_PORTS) ? -EXFULL : index;
}
/* called with RTNL but without bridge lock */
static struct net_bridge_port *new_nbp(struct net_bridge *br,
struct net_device *dev)
{
struct net_bridge_port *p;
int index, err;
index = find_portno(br);
if (index < 0)
return ERR_PTR(index);
p = kzalloc(sizeof(*p), GFP_KERNEL);
if (p == NULL)
return ERR_PTR(-ENOMEM);
p->br = br;
dev_hold_track(dev, &p->dev_tracker, GFP_KERNEL);
p->dev = dev;
p->path_cost = port_cost(dev);
p->priority = 0x8000 >> BR_PORT_BITS;
p->port_no = index;
p->flags = BR_LEARNING | BR_FLOOD | BR_MCAST_FLOOD | BR_BCAST_FLOOD;
br_init_port(p);
br_set_state(p, BR_STATE_DISABLED);
br_stp_port_timer_init(p);
err = br_multicast_add_port(p);
if (err) {
dev_put_track(dev, &p->dev_tracker);
kfree(p);
p = ERR_PTR(err);
}
return p;
}
int br_add_bridge(struct net *net, const char *name)
{
struct net_device *dev;
int res;
dev = alloc_netdev(sizeof(struct net_bridge), name, NET_NAME_UNKNOWN,
br_dev_setup);
if (!dev)
return -ENOMEM;
dev_net_set(dev, net);
dev->rtnl_link_ops = &br_link_ops;
res = register_netdevice(dev);
if (res)
free_netdev(dev);
return res;
}
int br_del_bridge(struct net *net, const char *name)
{
struct net_device *dev;
int ret = 0;
dev = __dev_get_by_name(net, name);
if (dev == NULL)
ret = -ENXIO; /* Could not find device */
else if (!netif_is_bridge_master(dev)) {
/* Attempt to delete non bridge device! */
ret = -EPERM;
}
else if (dev->flags & IFF_UP) {
/* Not shutdown yet. */
ret = -EBUSY;
}
else
br_dev_delete(dev, NULL);
return ret;
}
/* MTU of the bridge pseudo-device: ETH_DATA_LEN or the minimum of the ports */
static int br_mtu_min(const struct net_bridge *br)
{
const struct net_bridge_port *p;
int ret_mtu = 0;
list_for_each_entry(p, &br->port_list, list)
if (!ret_mtu || ret_mtu > p->dev->mtu)
ret_mtu = p->dev->mtu;
return ret_mtu ? ret_mtu : ETH_DATA_LEN;
}
void br_mtu_auto_adjust(struct net_bridge *br)
{
ASSERT_RTNL();
/* if the bridge MTU was manually configured don't mess with it */
if (br_opt_get(br, BROPT_MTU_SET_BY_USER))
return;
/* change to the minimum MTU and clear the flag which was set by
* the bridge ndo_change_mtu callback
*/
dev_set_mtu(br->dev, br_mtu_min(br));
br_opt_toggle(br, BROPT_MTU_SET_BY_USER, false);
}
static void br_set_gso_limits(struct net_bridge *br)
{
unsigned int gso_max_size = GSO_MAX_SIZE;
u16 gso_max_segs = GSO_MAX_SEGS;
const struct net_bridge_port *p;
list_for_each_entry(p, &br->port_list, list) {
gso_max_size = min(gso_max_size, p->dev->gso_max_size);
gso_max_segs = min(gso_max_segs, p->dev->gso_max_segs);
}
netif_set_gso_max_size(br->dev, gso_max_size);
netif_set_gso_max_segs(br->dev, gso_max_segs);
}
/*
* Recomputes features using slave's features
*/
netdev_features_t br_features_recompute(struct net_bridge *br,
netdev_features_t features)
{
struct net_bridge_port *p;
netdev_features_t mask;
if (list_empty(&br->port_list))
return features;
mask = features;
features &= ~NETIF_F_ONE_FOR_ALL;
list_for_each_entry(p, &br->port_list, list) {
features = netdev_increment_features(features,
p->dev->features, mask);
}
features = netdev_add_tso_features(features, mask);
return features;
}
/* called with RTNL */
int br_add_if(struct net_bridge *br, struct net_device *dev,
struct netlink_ext_ack *extack)
{
struct net_bridge_port *p;
int err = 0;
unsigned br_hr, dev_hr;
bool changed_addr, fdb_synced = false;
net: bridge: allow enslaving some DSA master network devices Commit 8db0a2ee2c63 ("net: bridge: reject DSA-enabled master netdevices as bridge members") added a special check in br_if.c in order to check for a DSA master network device with a tagging protocol configured. This was done because back then, such devices, once enslaved in a bridge would become inoperative and would not pass DSA tagged traffic anymore due to br_handle_frame returning RX_HANDLER_CONSUMED. But right now we have valid use cases which do require bridging of DSA masters. One such example is when the DSA master ports are DSA switch ports themselves (in a disjoint tree setup). This should be completely equivalent, functionally speaking, from having multiple DSA switches hanging off of the ports of a switchdev driver. So we should allow the enslaving of DSA tagged master network devices. Instead of the regular br_handle_frame(), install a new function br_handle_frame_dummy() on these DSA masters, which returns RX_HANDLER_PASS in order to call into the DSA specific tagging protocol handlers, and lift the restriction from br_add_if. Suggested-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Suggested-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Tested-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-05-10 16:37:40 +00:00
/* Don't allow bridging non-ethernet like devices. */
if ((dev->flags & IFF_LOOPBACK) ||
dev->type != ARPHRD_ETHER || dev->addr_len != ETH_ALEN ||
net: bridge: allow enslaving some DSA master network devices Commit 8db0a2ee2c63 ("net: bridge: reject DSA-enabled master netdevices as bridge members") added a special check in br_if.c in order to check for a DSA master network device with a tagging protocol configured. This was done because back then, such devices, once enslaved in a bridge would become inoperative and would not pass DSA tagged traffic anymore due to br_handle_frame returning RX_HANDLER_CONSUMED. But right now we have valid use cases which do require bridging of DSA masters. One such example is when the DSA master ports are DSA switch ports themselves (in a disjoint tree setup). This should be completely equivalent, functionally speaking, from having multiple DSA switches hanging off of the ports of a switchdev driver. So we should allow the enslaving of DSA tagged master network devices. Instead of the regular br_handle_frame(), install a new function br_handle_frame_dummy() on these DSA masters, which returns RX_HANDLER_PASS in order to call into the DSA specific tagging protocol handlers, and lift the restriction from br_add_if. Suggested-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Suggested-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Tested-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-05-10 16:37:40 +00:00
!is_valid_ether_addr(dev->dev_addr))
return -EINVAL;
net: bridge: allow enslaving some DSA master network devices Commit 8db0a2ee2c63 ("net: bridge: reject DSA-enabled master netdevices as bridge members") added a special check in br_if.c in order to check for a DSA master network device with a tagging protocol configured. This was done because back then, such devices, once enslaved in a bridge would become inoperative and would not pass DSA tagged traffic anymore due to br_handle_frame returning RX_HANDLER_CONSUMED. But right now we have valid use cases which do require bridging of DSA masters. One such example is when the DSA master ports are DSA switch ports themselves (in a disjoint tree setup). This should be completely equivalent, functionally speaking, from having multiple DSA switches hanging off of the ports of a switchdev driver. So we should allow the enslaving of DSA tagged master network devices. Instead of the regular br_handle_frame(), install a new function br_handle_frame_dummy() on these DSA masters, which returns RX_HANDLER_PASS in order to call into the DSA specific tagging protocol handlers, and lift the restriction from br_add_if. Suggested-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Suggested-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Tested-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-05-10 16:37:40 +00:00
/* Also don't allow bridging of net devices that are DSA masters, since
* the bridge layer rx_handler prevents the DSA fake ethertype handler
* to be invoked, so we don't get the chance to strip off and parse the
* DSA switch tag protocol header (the bridge layer just returns
* RX_HANDLER_CONSUMED, stopping RX processing for these frames).
* The only case where that would not be an issue is when bridging can
* already be offloaded, such as when the DSA master is itself a DSA
* or plain switchdev port, and is bridged only with other ports from
* the same hardware device.
*/
if (netdev_uses_dsa(dev)) {
list_for_each_entry(p, &br->port_list, list) {
if (!netdev_port_same_parent_id(dev, p->dev)) {
NL_SET_ERR_MSG(extack,
"Cannot do software bridging with a DSA master");
return -EINVAL;
}
}
}
/* No bridging of bridges */
if (dev->netdev_ops->ndo_start_xmit == br_dev_xmit) {
NL_SET_ERR_MSG(extack,
"Can not enslave a bridge to a bridge");
return -ELOOP;
}
/* Device has master upper dev */
if (netdev_master_upper_dev_get(dev))
return -EBUSY;
/* No bridging devices that dislike that (e.g. wireless) */
if (dev->priv_flags & IFF_DONT_BRIDGE) {
NL_SET_ERR_MSG(extack,
"Device does not allow enslaving to a bridge");
return -EOPNOTSUPP;
}
p = new_nbp(br, dev);
if (IS_ERR(p))
return PTR_ERR(p);
call_netdevice_notifiers(NETDEV_JOIN, dev);
bridge: Automatically manage port promiscuous mode. There exist configurations where the administrator or another management entity has the foreknowledge of all the mac addresses of end systems that are being bridged together. In these environments, the administrator can statically configure known addresses in the bridge FDB and disable flooding and learning on ports. This makes it possible to turn off promiscuous mode on the interfaces connected to the bridge. Here is why disabling flooding and learning allows us to control promiscuity: Consider port X. All traffic coming into this port from outside the bridge (ingress) will be either forwarded through other ports of the bridge (egress) or dropped. Forwarding (egress) is defined by FDB entries and by flooding in the event that no FDB entry exists. In the event that flooding is disabled, only FDB entries define the egress. Once learning is disabled, only static FDB entries provided by a management entity define the egress. If we provide information from these static FDBs to the ingress port X, then we'll be able to accept all traffic that can be successfully forwarded and drop all the other traffic sooner without spending CPU cycles to process it. Another way to define the above is as following equations: ingress = egress + drop expanding egress ingress = static FDB + learned FDB + flooding + drop disabling flooding and learning we a left with ingress = static FDB + drop By adding addresses from the static FDB entries to the MAC address filter of an ingress port X, we fully define what the bridge can process without dropping and can thus turn off promiscuous mode, thus dropping packets sooner. There have been suggestions that we may want to allow learning and update the filters with learned addresses as well. This would require mac-level authentication similar to 802.1x to prevent attacks against the hw filters as they are limited resource. Additionally, if the user places the bridge device in promiscuous mode, all ports are placed in promiscuous mode regardless of the changes to flooding and learning. Since the above functionality depends on full static configuration, we have also require that vlan filtering be enabled to take advantage of this. The reason is that the bridge has to be able to receive and process VLAN-tagged frames and the there are only 2 ways to accomplish this right now: promiscuous mode or vlan filtering. Suggested-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-16 13:59:20 +00:00
err = dev_set_allmulti(dev, 1);
if (err) {
net: bridge: fix memleak in br_add_if() I got a memleak report: BUG: memory leak unreferenced object 0x607ee521a658 (size 240): comm "syz-executor.0", pid 955, jiffies 4294780569 (age 16.449s) hex dump (first 32 bytes, cpu 1): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<00000000d830ea5a>] br_multicast_add_port+0x1c2/0x300 net/bridge/br_multicast.c:1693 [<00000000274d9a71>] new_nbp net/bridge/br_if.c:435 [inline] [<00000000274d9a71>] br_add_if+0x670/0x1740 net/bridge/br_if.c:611 [<0000000012ce888e>] do_set_master net/core/rtnetlink.c:2513 [inline] [<0000000012ce888e>] do_set_master+0x1aa/0x210 net/core/rtnetlink.c:2487 [<0000000099d1cafc>] __rtnl_newlink+0x1095/0x13e0 net/core/rtnetlink.c:3457 [<00000000a01facc0>] rtnl_newlink+0x64/0xa0 net/core/rtnetlink.c:3488 [<00000000acc9186c>] rtnetlink_rcv_msg+0x369/0xa10 net/core/rtnetlink.c:5550 [<00000000d4aabb9c>] netlink_rcv_skb+0x134/0x3d0 net/netlink/af_netlink.c:2504 [<00000000bc2e12a3>] netlink_unicast_kernel net/netlink/af_netlink.c:1314 [inline] [<00000000bc2e12a3>] netlink_unicast+0x4a0/0x6a0 net/netlink/af_netlink.c:1340 [<00000000e4dc2d0e>] netlink_sendmsg+0x789/0xc70 net/netlink/af_netlink.c:1929 [<000000000d22c8b3>] sock_sendmsg_nosec net/socket.c:654 [inline] [<000000000d22c8b3>] sock_sendmsg+0x139/0x170 net/socket.c:674 [<00000000e281417a>] ____sys_sendmsg+0x658/0x7d0 net/socket.c:2350 [<00000000237aa2ab>] ___sys_sendmsg+0xf8/0x170 net/socket.c:2404 [<000000004f2dc381>] __sys_sendmsg+0xd3/0x190 net/socket.c:2433 [<0000000005feca6c>] do_syscall_64+0x37/0x90 arch/x86/entry/common.c:47 [<000000007304477d>] entry_SYSCALL_64_after_hwframe+0x44/0xae On error path of br_add_if(), p->mcast_stats allocated in new_nbp() need be freed, or it will be leaked. Fixes: 1080ab95e3c7 ("net: bridge: add support for IGMP/MLD stats and export them via netlink") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Acked-by: Nikolay Aleksandrov <nikolay@nvidia.com> Link: https://lore.kernel.org/r/20210809132023.978546-1-yangyingliang@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-08-09 13:20:23 +00:00
br_multicast_del_port(p);
kfree(p); /* kobject not yet init'd, manually free */
goto err1;
}
err = kobject_init_and_add(&p->kobj, &brport_ktype, &(dev->dev.kobj),
SYSFS_BRIDGE_PORT_ATTR);
if (err)
goto err2;
err = br_sysfs_addif(p);
if (err)
goto err2;
netpoll: Remove gfp parameter from __netpoll_setup The gfp parameter was added in: commit 47be03a28cc6c80e3aa2b3e8ed6d960ff0c5c0af Author: Amerigo Wang <amwang@redhat.com> Date: Fri Aug 10 01:24:37 2012 +0000 netpoll: use GFP_ATOMIC in slave_enable_netpoll() and __netpoll_setup() slave_enable_netpoll() and __netpoll_setup() may be called with read_lock() held, so should use GFP_ATOMIC to allocate memory. Eric suggested to pass gfp flags to __netpoll_setup(). Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: "David S. Miller" <davem@davemloft.net> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Cong Wang <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> The reason for the gfp parameter was removed in: commit c4cdef9b7183159c23c7302aaf270d64c549f557 Author: dingtianhong <dingtianhong@huawei.com> Date: Tue Jul 23 15:25:27 2013 +0800 bonding: don't call slave_xxx_netpoll under spinlocks The slave_xxx_netpoll will call synchronize_rcu_bh(), so the function may schedule and sleep, it should't be called under spinlocks. bond_netpoll_setup() and bond_netpoll_cleanup() are always protected by rtnl lock, it is no need to take the read lock, as the slave list couldn't be changed outside rtnl lock. Signed-off-by: Ding Tianhong <dingtianhong@huawei.com> Cc: Jay Vosburgh <fubar@us.ibm.com> Cc: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: David S. Miller <davem@davemloft.net> Nothing else that calls __netpoll_setup or ndo_netpoll_setup requires a gfp paramter, so remove the gfp parameter from both of these functions making the code clearer. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-27 22:36:38 +00:00
err = br_netpoll_enable(p);
if (err)
goto err3;
net: bridge: allow enslaving some DSA master network devices Commit 8db0a2ee2c63 ("net: bridge: reject DSA-enabled master netdevices as bridge members") added a special check in br_if.c in order to check for a DSA master network device with a tagging protocol configured. This was done because back then, such devices, once enslaved in a bridge would become inoperative and would not pass DSA tagged traffic anymore due to br_handle_frame returning RX_HANDLER_CONSUMED. But right now we have valid use cases which do require bridging of DSA masters. One such example is when the DSA master ports are DSA switch ports themselves (in a disjoint tree setup). This should be completely equivalent, functionally speaking, from having multiple DSA switches hanging off of the ports of a switchdev driver. So we should allow the enslaving of DSA tagged master network devices. Instead of the regular br_handle_frame(), install a new function br_handle_frame_dummy() on these DSA masters, which returns RX_HANDLER_PASS in order to call into the DSA specific tagging protocol handlers, and lift the restriction from br_add_if. Suggested-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Suggested-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Tested-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-05-10 16:37:40 +00:00
err = netdev_rx_handler_register(dev, br_get_rx_handler(dev), p);
if (err)
goto err4;
dev->priv_flags |= IFF_BRIDGE_PORT;
err = netdev_master_upper_dev_link(dev, br->dev, NULL, NULL, extack);
if (err)
goto err5;
dev_disable_lro(dev);
list_add_rcu(&p->list, &br->port_list);
nbp_update_port_count(br);
if (!br_promisc_port(p) && (p->dev->priv_flags & IFF_UNICAST_FLT)) {
/* When updating the port count we also update all ports'
* promiscuous mode.
* A port leaving promiscuous mode normally gets the bridge's
* fdb synced to the unicast filter (if supported), however,
* `br_port_clear_promisc` does not distinguish between
* non-promiscuous ports and *new* ports, so we need to
* sync explicitly here.
*/
fdb_synced = br_fdb_sync_static(br, p) == 0;
if (!fdb_synced)
netdev_err(dev, "failed to sync bridge static fdb addresses to this port\n");
}
netdev_update_features(br->dev);
br_hr = br->dev->needed_headroom;
dev_hr = netdev_get_fwd_headroom(dev);
if (br_hr < dev_hr)
update_headroom(br, dev_hr);
else
netdev_set_rx_headroom(dev, br_hr);
if (br_fdb_add_local(br, p, dev->dev_addr, 0))
bridge: Change local fdb entries whenever mac address of bridge device changes Vlan code may need fdb change when changing mac address of bridge device even if it is caused by the mac address changing of a bridge port. Example configuration: ip link set eth0 address 12:34:56:78:90:ab ip link set eth1 address aa:bb:cc:dd:ee:ff brctl addif br0 eth0 brctl addif br0 eth1 # br0 will have mac address 12:34:56:78:90:ab bridge vlan add dev br0 vid 10 self bridge vlan add dev eth0 vid 10 We will have fdb entry such that f->dst == NULL, f->vlan_id == 10 and f->addr == 12:34:56:78:90:ab at this time. Next, change the mac address of eth0 to greater value. ip link set eth0 address ee:ff:12:34:56:78 Then, mac address of br0 will be recalculated and set to aa:bb:cc:dd:ee:ff. However, an entry aa:bb:cc:dd:ee:ff will not be created and we will be not able to communicate using br0 on vlan 10. Address this issue by deleting and adding local entries whenever changing the mac address of the bridge device. If there already exists an entry that has the same address, for example, in case that br_fdb_changeaddr() has already inserted it, br_fdb_change_mac_address() will simply fail to insert it and no duplicated entry will be made, as it was. This approach also needs br_add_if() to call br_fdb_insert() before br_stp_recalculate_bridge_id() so that we don't create an entry whose dst == NULL in this function to preserve previous behavior. Note that this is a slight change in behavior where the bridge device can receive the traffic to the new address before calling br_stp_recalculate_bridge_id() in br_add_if(). However, it is not a problem because we have already the address on the new port and such a way to insert new one before recalculating bridge id is taken in br_device_event() as well. Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp> Acked-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-07 07:48:21 +00:00
netdev_err(dev, "failed insert local address bridge forwarding table\n");
if (br->dev->addr_assign_type != NET_ADDR_SET) {
/* Ask for permission to use this MAC address now, even if we
* don't end up choosing it below.
*/
err = dev_pre_changeaddr_notify(br->dev, dev->dev_addr, extack);
if (err)
net: bridge: switchdev: let drivers inform which bridge ports are offloaded On reception of an skb, the bridge checks if it was marked as 'already forwarded in hardware' (checks if skb->offload_fwd_mark == 1), and if it is, it assigns the source hardware domain of that skb based on the hardware domain of the ingress port. Then during forwarding, it enforces that the egress port must have a different hardware domain than the ingress one (this is done in nbp_switchdev_allowed_egress). Non-switchdev drivers don't report any physical switch id (neither through devlink nor .ndo_get_port_parent_id), therefore the bridge assigns them a hardware domain of 0, and packets coming from them will always have skb->offload_fwd_mark = 0. So there aren't any restrictions. Problems appear due to the fact that DSA would like to perform software fallback for bonding and team interfaces that the physical switch cannot offload. +-- br0 ---+ / / | \ / / | \ / | | bond0 / | | / \ swp0 swp1 swp2 swp3 swp4 There, it is desirable that the presence of swp3 and swp4 under a non-offloaded LAG does not preclude us from doing hardware bridging beteen swp0, swp1 and swp2. The bandwidth of the CPU is often times high enough that software bridging between {swp0,swp1,swp2} and bond0 is not impractical. But this creates an impossible paradox given the current way in which port hardware domains are assigned. When the driver receives a packet from swp0 (say, due to flooding), it must set skb->offload_fwd_mark to something. - If we set it to 0, then the bridge will forward it towards swp1, swp2 and bond0. But the switch has already forwarded it towards swp1 and swp2 (not to bond0, remember, that isn't offloaded, so as far as the switch is concerned, ports swp3 and swp4 are not looking up the FDB, and the entire bond0 is a destination that is strictly behind the CPU). But we don't want duplicated traffic towards swp1 and swp2, so it's not ok to set skb->offload_fwd_mark = 0. - If we set it to 1, then the bridge will not forward the skb towards the ports with the same switchdev mark, i.e. not to swp1, swp2 and bond0. Towards swp1 and swp2 that's ok, but towards bond0? It should have forwarded the skb there. So the real issue is that bond0 will be assigned the same hardware domain as {swp0,swp1,swp2}, because the function that assigns hardware domains to bridge ports, nbp_switchdev_add(), recurses through bond0's lower interfaces until it finds something that implements devlink (calls dev_get_port_parent_id with bool recurse = true). This is a problem because the fact that bond0 can be offloaded by swp3 and swp4 in our example is merely an assumption. A solution is to give the bridge explicit hints as to what hardware domain it should use for each port. Currently, the bridging offload is very 'silent': a driver registers a netdevice notifier, which is put on the netns's notifier chain, and which sniffs around for NETDEV_CHANGEUPPER events where the upper is a bridge, and the lower is an interface it knows about (one registered by this driver, normally). Then, from within that notifier, it does a bunch of stuff behind the bridge's back, without the bridge necessarily knowing that there's somebody offloading that port. It looks like this: ip link set swp0 master br0 | v br_add_if() calls netdev_master_upper_dev_link() | v call_netdevice_notifiers | v dsa_slave_netdevice_event | v oh, hey! it's for me! | v .port_bridge_join What we do to solve the conundrum is to be less silent, and change the switchdev drivers to present themselves to the bridge. Something like this: ip link set swp0 master br0 | v br_add_if() calls netdev_master_upper_dev_link() | v bridge: Aye! I'll use this call_netdevice_notifiers ^ ppid as the | | hardware domain for v | this port, and zero dsa_slave_netdevice_event | if I got nothing. | | v | oh, hey! it's for me! | | | v | .port_bridge_join | | | +------------------------+ switchdev_bridge_port_offload(swp0, swp0) Then stacked interfaces (like bond0 on top of swp3/swp4) would be treated differently in DSA, depending on whether we can or cannot offload them. The offload case: ip link set bond0 master br0 | v br_add_if() calls netdev_master_upper_dev_link() | v bridge: Aye! I'll use this call_netdevice_notifiers ^ ppid as the | | switchdev mark for v | bond0. dsa_slave_netdevice_event | Coincidentally (or not), | | bond0 and swp0, swp1, swp2 v | all have the same switchdev hmm, it's not quite for me, | mark now, since the ASIC but my driver has already | is able to forward towards called .port_lag_join | all these ports in hw. for it, because I have | a port with dp->lag_dev == bond0. | | | v | .port_bridge_join | for swp3 and swp4 | | | +------------------------+ switchdev_bridge_port_offload(bond0, swp3) switchdev_bridge_port_offload(bond0, swp4) And the non-offload case: ip link set bond0 master br0 | v br_add_if() calls netdev_master_upper_dev_link() | v bridge waiting: call_netdevice_notifiers ^ huh, switchdev_bridge_port_offload | | wasn't called, okay, I'll use a v | hwdom of zero for this one. dsa_slave_netdevice_event : Then packets received on swp0 will | : not be software-forwarded towards v : swp1, but they will towards bond0. it's not for me, but bond0 is an upper of swp3 and swp4, but their dp->lag_dev is NULL because they couldn't offload it. Basically we can draw the conclusion that the lowers of a bridge port can come and go, so depending on the configuration of lowers for a bridge port, it can dynamically toggle between offloaded and unoffloaded. Therefore, we need an equivalent switchdev_bridge_port_unoffload too. This patch changes the way any switchdev driver interacts with the bridge. From now on, everybody needs to call switchdev_bridge_port_offload and switchdev_bridge_port_unoffload, otherwise the bridge will treat the port as non-offloaded and allow software flooding to other ports from the same ASIC. Note that these functions lay the ground for a more complex handshake between switchdev drivers and the bridge in the future. For drivers that will request a replay of the switchdev objects when they offload and unoffload a bridge port (DSA, dpaa2-switch, ocelot), we place the call to switchdev_bridge_port_unoffload() strategically inside the NETDEV_PRECHANGEUPPER notifier's code path, and not inside NETDEV_CHANGEUPPER. This is because the switchdev object replay helpers need the netdev adjacency lists to be valid, and that is only true in NETDEV_PRECHANGEUPPER. Cc: Vadym Kochan <vkochan@marvell.com> Cc: Taras Chornyi <tchornyi@marvell.com> Cc: Ioana Ciornei <ioana.ciornei@nxp.com> Cc: Lars Povlsen <lars.povlsen@microchip.com> Cc: Steen Hegelund <Steen.Hegelund@microchip.com> Cc: UNGLinuxDriver@microchip.com Cc: Claudiu Manoil <claudiu.manoil@nxp.com> Cc: Alexandre Belloni <alexandre.belloni@bootlin.com> Cc: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Tested-by: Ioana Ciornei <ioana.ciornei@nxp.com> # dpaa2-switch: regression Acked-by: Ioana Ciornei <ioana.ciornei@nxp.com> # dpaa2-switch Tested-by: Horatiu Vultur <horatiu.vultur@microchip.com> # ocelot-switch Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-21 16:24:01 +00:00
goto err6;
}
err = nbp_vlan_init(p, extack);
if (err) {
netdev_err(dev, "failed to initialize vlan filtering on this port\n");
net: bridge: switchdev: let drivers inform which bridge ports are offloaded On reception of an skb, the bridge checks if it was marked as 'already forwarded in hardware' (checks if skb->offload_fwd_mark == 1), and if it is, it assigns the source hardware domain of that skb based on the hardware domain of the ingress port. Then during forwarding, it enforces that the egress port must have a different hardware domain than the ingress one (this is done in nbp_switchdev_allowed_egress). Non-switchdev drivers don't report any physical switch id (neither through devlink nor .ndo_get_port_parent_id), therefore the bridge assigns them a hardware domain of 0, and packets coming from them will always have skb->offload_fwd_mark = 0. So there aren't any restrictions. Problems appear due to the fact that DSA would like to perform software fallback for bonding and team interfaces that the physical switch cannot offload. +-- br0 ---+ / / | \ / / | \ / | | bond0 / | | / \ swp0 swp1 swp2 swp3 swp4 There, it is desirable that the presence of swp3 and swp4 under a non-offloaded LAG does not preclude us from doing hardware bridging beteen swp0, swp1 and swp2. The bandwidth of the CPU is often times high enough that software bridging between {swp0,swp1,swp2} and bond0 is not impractical. But this creates an impossible paradox given the current way in which port hardware domains are assigned. When the driver receives a packet from swp0 (say, due to flooding), it must set skb->offload_fwd_mark to something. - If we set it to 0, then the bridge will forward it towards swp1, swp2 and bond0. But the switch has already forwarded it towards swp1 and swp2 (not to bond0, remember, that isn't offloaded, so as far as the switch is concerned, ports swp3 and swp4 are not looking up the FDB, and the entire bond0 is a destination that is strictly behind the CPU). But we don't want duplicated traffic towards swp1 and swp2, so it's not ok to set skb->offload_fwd_mark = 0. - If we set it to 1, then the bridge will not forward the skb towards the ports with the same switchdev mark, i.e. not to swp1, swp2 and bond0. Towards swp1 and swp2 that's ok, but towards bond0? It should have forwarded the skb there. So the real issue is that bond0 will be assigned the same hardware domain as {swp0,swp1,swp2}, because the function that assigns hardware domains to bridge ports, nbp_switchdev_add(), recurses through bond0's lower interfaces until it finds something that implements devlink (calls dev_get_port_parent_id with bool recurse = true). This is a problem because the fact that bond0 can be offloaded by swp3 and swp4 in our example is merely an assumption. A solution is to give the bridge explicit hints as to what hardware domain it should use for each port. Currently, the bridging offload is very 'silent': a driver registers a netdevice notifier, which is put on the netns's notifier chain, and which sniffs around for NETDEV_CHANGEUPPER events where the upper is a bridge, and the lower is an interface it knows about (one registered by this driver, normally). Then, from within that notifier, it does a bunch of stuff behind the bridge's back, without the bridge necessarily knowing that there's somebody offloading that port. It looks like this: ip link set swp0 master br0 | v br_add_if() calls netdev_master_upper_dev_link() | v call_netdevice_notifiers | v dsa_slave_netdevice_event | v oh, hey! it's for me! | v .port_bridge_join What we do to solve the conundrum is to be less silent, and change the switchdev drivers to present themselves to the bridge. Something like this: ip link set swp0 master br0 | v br_add_if() calls netdev_master_upper_dev_link() | v bridge: Aye! I'll use this call_netdevice_notifiers ^ ppid as the | | hardware domain for v | this port, and zero dsa_slave_netdevice_event | if I got nothing. | | v | oh, hey! it's for me! | | | v | .port_bridge_join | | | +------------------------+ switchdev_bridge_port_offload(swp0, swp0) Then stacked interfaces (like bond0 on top of swp3/swp4) would be treated differently in DSA, depending on whether we can or cannot offload them. The offload case: ip link set bond0 master br0 | v br_add_if() calls netdev_master_upper_dev_link() | v bridge: Aye! I'll use this call_netdevice_notifiers ^ ppid as the | | switchdev mark for v | bond0. dsa_slave_netdevice_event | Coincidentally (or not), | | bond0 and swp0, swp1, swp2 v | all have the same switchdev hmm, it's not quite for me, | mark now, since the ASIC but my driver has already | is able to forward towards called .port_lag_join | all these ports in hw. for it, because I have | a port with dp->lag_dev == bond0. | | | v | .port_bridge_join | for swp3 and swp4 | | | +------------------------+ switchdev_bridge_port_offload(bond0, swp3) switchdev_bridge_port_offload(bond0, swp4) And the non-offload case: ip link set bond0 master br0 | v br_add_if() calls netdev_master_upper_dev_link() | v bridge waiting: call_netdevice_notifiers ^ huh, switchdev_bridge_port_offload | | wasn't called, okay, I'll use a v | hwdom of zero for this one. dsa_slave_netdevice_event : Then packets received on swp0 will | : not be software-forwarded towards v : swp1, but they will towards bond0. it's not for me, but bond0 is an upper of swp3 and swp4, but their dp->lag_dev is NULL because they couldn't offload it. Basically we can draw the conclusion that the lowers of a bridge port can come and go, so depending on the configuration of lowers for a bridge port, it can dynamically toggle between offloaded and unoffloaded. Therefore, we need an equivalent switchdev_bridge_port_unoffload too. This patch changes the way any switchdev driver interacts with the bridge. From now on, everybody needs to call switchdev_bridge_port_offload and switchdev_bridge_port_unoffload, otherwise the bridge will treat the port as non-offloaded and allow software flooding to other ports from the same ASIC. Note that these functions lay the ground for a more complex handshake between switchdev drivers and the bridge in the future. For drivers that will request a replay of the switchdev objects when they offload and unoffload a bridge port (DSA, dpaa2-switch, ocelot), we place the call to switchdev_bridge_port_unoffload() strategically inside the NETDEV_PRECHANGEUPPER notifier's code path, and not inside NETDEV_CHANGEUPPER. This is because the switchdev object replay helpers need the netdev adjacency lists to be valid, and that is only true in NETDEV_PRECHANGEUPPER. Cc: Vadym Kochan <vkochan@marvell.com> Cc: Taras Chornyi <tchornyi@marvell.com> Cc: Ioana Ciornei <ioana.ciornei@nxp.com> Cc: Lars Povlsen <lars.povlsen@microchip.com> Cc: Steen Hegelund <Steen.Hegelund@microchip.com> Cc: UNGLinuxDriver@microchip.com Cc: Claudiu Manoil <claudiu.manoil@nxp.com> Cc: Alexandre Belloni <alexandre.belloni@bootlin.com> Cc: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Tested-by: Ioana Ciornei <ioana.ciornei@nxp.com> # dpaa2-switch: regression Acked-by: Ioana Ciornei <ioana.ciornei@nxp.com> # dpaa2-switch Tested-by: Horatiu Vultur <horatiu.vultur@microchip.com> # ocelot-switch Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-21 16:24:01 +00:00
goto err6;
}
spin_lock_bh(&br->lock);
changed_addr = br_stp_recalculate_bridge_id(br);
if (netif_running(dev) && netif_oper_up(dev) &&
(br->dev->flags & IFF_UP))
br_stp_enable_port(p);
spin_unlock_bh(&br->lock);
br_ifinfo_notify(RTM_NEWLINK, NULL, p);
if (changed_addr)
call_netdevice_notifiers(NETDEV_CHANGEADDR, br->dev);
br_mtu_auto_adjust(br);
br_set_gso_limits(br);
kobject_uevent(&p->kobj, KOBJ_ADD);
return 0;
net: bridge: switchdev: let drivers inform which bridge ports are offloaded On reception of an skb, the bridge checks if it was marked as 'already forwarded in hardware' (checks if skb->offload_fwd_mark == 1), and if it is, it assigns the source hardware domain of that skb based on the hardware domain of the ingress port. Then during forwarding, it enforces that the egress port must have a different hardware domain than the ingress one (this is done in nbp_switchdev_allowed_egress). Non-switchdev drivers don't report any physical switch id (neither through devlink nor .ndo_get_port_parent_id), therefore the bridge assigns them a hardware domain of 0, and packets coming from them will always have skb->offload_fwd_mark = 0. So there aren't any restrictions. Problems appear due to the fact that DSA would like to perform software fallback for bonding and team interfaces that the physical switch cannot offload. +-- br0 ---+ / / | \ / / | \ / | | bond0 / | | / \ swp0 swp1 swp2 swp3 swp4 There, it is desirable that the presence of swp3 and swp4 under a non-offloaded LAG does not preclude us from doing hardware bridging beteen swp0, swp1 and swp2. The bandwidth of the CPU is often times high enough that software bridging between {swp0,swp1,swp2} and bond0 is not impractical. But this creates an impossible paradox given the current way in which port hardware domains are assigned. When the driver receives a packet from swp0 (say, due to flooding), it must set skb->offload_fwd_mark to something. - If we set it to 0, then the bridge will forward it towards swp1, swp2 and bond0. But the switch has already forwarded it towards swp1 and swp2 (not to bond0, remember, that isn't offloaded, so as far as the switch is concerned, ports swp3 and swp4 are not looking up the FDB, and the entire bond0 is a destination that is strictly behind the CPU). But we don't want duplicated traffic towards swp1 and swp2, so it's not ok to set skb->offload_fwd_mark = 0. - If we set it to 1, then the bridge will not forward the skb towards the ports with the same switchdev mark, i.e. not to swp1, swp2 and bond0. Towards swp1 and swp2 that's ok, but towards bond0? It should have forwarded the skb there. So the real issue is that bond0 will be assigned the same hardware domain as {swp0,swp1,swp2}, because the function that assigns hardware domains to bridge ports, nbp_switchdev_add(), recurses through bond0's lower interfaces until it finds something that implements devlink (calls dev_get_port_parent_id with bool recurse = true). This is a problem because the fact that bond0 can be offloaded by swp3 and swp4 in our example is merely an assumption. A solution is to give the bridge explicit hints as to what hardware domain it should use for each port. Currently, the bridging offload is very 'silent': a driver registers a netdevice notifier, which is put on the netns's notifier chain, and which sniffs around for NETDEV_CHANGEUPPER events where the upper is a bridge, and the lower is an interface it knows about (one registered by this driver, normally). Then, from within that notifier, it does a bunch of stuff behind the bridge's back, without the bridge necessarily knowing that there's somebody offloading that port. It looks like this: ip link set swp0 master br0 | v br_add_if() calls netdev_master_upper_dev_link() | v call_netdevice_notifiers | v dsa_slave_netdevice_event | v oh, hey! it's for me! | v .port_bridge_join What we do to solve the conundrum is to be less silent, and change the switchdev drivers to present themselves to the bridge. Something like this: ip link set swp0 master br0 | v br_add_if() calls netdev_master_upper_dev_link() | v bridge: Aye! I'll use this call_netdevice_notifiers ^ ppid as the | | hardware domain for v | this port, and zero dsa_slave_netdevice_event | if I got nothing. | | v | oh, hey! it's for me! | | | v | .port_bridge_join | | | +------------------------+ switchdev_bridge_port_offload(swp0, swp0) Then stacked interfaces (like bond0 on top of swp3/swp4) would be treated differently in DSA, depending on whether we can or cannot offload them. The offload case: ip link set bond0 master br0 | v br_add_if() calls netdev_master_upper_dev_link() | v bridge: Aye! I'll use this call_netdevice_notifiers ^ ppid as the | | switchdev mark for v | bond0. dsa_slave_netdevice_event | Coincidentally (or not), | | bond0 and swp0, swp1, swp2 v | all have the same switchdev hmm, it's not quite for me, | mark now, since the ASIC but my driver has already | is able to forward towards called .port_lag_join | all these ports in hw. for it, because I have | a port with dp->lag_dev == bond0. | | | v | .port_bridge_join | for swp3 and swp4 | | | +------------------------+ switchdev_bridge_port_offload(bond0, swp3) switchdev_bridge_port_offload(bond0, swp4) And the non-offload case: ip link set bond0 master br0 | v br_add_if() calls netdev_master_upper_dev_link() | v bridge waiting: call_netdevice_notifiers ^ huh, switchdev_bridge_port_offload | | wasn't called, okay, I'll use a v | hwdom of zero for this one. dsa_slave_netdevice_event : Then packets received on swp0 will | : not be software-forwarded towards v : swp1, but they will towards bond0. it's not for me, but bond0 is an upper of swp3 and swp4, but their dp->lag_dev is NULL because they couldn't offload it. Basically we can draw the conclusion that the lowers of a bridge port can come and go, so depending on the configuration of lowers for a bridge port, it can dynamically toggle between offloaded and unoffloaded. Therefore, we need an equivalent switchdev_bridge_port_unoffload too. This patch changes the way any switchdev driver interacts with the bridge. From now on, everybody needs to call switchdev_bridge_port_offload and switchdev_bridge_port_unoffload, otherwise the bridge will treat the port as non-offloaded and allow software flooding to other ports from the same ASIC. Note that these functions lay the ground for a more complex handshake between switchdev drivers and the bridge in the future. For drivers that will request a replay of the switchdev objects when they offload and unoffload a bridge port (DSA, dpaa2-switch, ocelot), we place the call to switchdev_bridge_port_unoffload() strategically inside the NETDEV_PRECHANGEUPPER notifier's code path, and not inside NETDEV_CHANGEUPPER. This is because the switchdev object replay helpers need the netdev adjacency lists to be valid, and that is only true in NETDEV_PRECHANGEUPPER. Cc: Vadym Kochan <vkochan@marvell.com> Cc: Taras Chornyi <tchornyi@marvell.com> Cc: Ioana Ciornei <ioana.ciornei@nxp.com> Cc: Lars Povlsen <lars.povlsen@microchip.com> Cc: Steen Hegelund <Steen.Hegelund@microchip.com> Cc: UNGLinuxDriver@microchip.com Cc: Claudiu Manoil <claudiu.manoil@nxp.com> Cc: Alexandre Belloni <alexandre.belloni@bootlin.com> Cc: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Tested-by: Ioana Ciornei <ioana.ciornei@nxp.com> # dpaa2-switch: regression Acked-by: Ioana Ciornei <ioana.ciornei@nxp.com> # dpaa2-switch Tested-by: Horatiu Vultur <horatiu.vultur@microchip.com> # ocelot-switch Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-21 16:24:01 +00:00
err6:
if (fdb_synced)
br_fdb_unsync_static(br, p);
list_del_rcu(&p->list);
br_fdb_delete_by_port(br, p, 0, 1);
nbp_update_port_count(br);
netdev_upper_dev_unlink(dev, br->dev);
err5:
dev->priv_flags &= ~IFF_BRIDGE_PORT;
netdev_rx_handler_unregister(dev);
err4:
br_netpoll_disable(p);
err3:
sysfs_remove_link(br->ifobj, p->dev->name);
err2:
net: bridge: fix memleak in br_add_if() I got a memleak report: BUG: memory leak unreferenced object 0x607ee521a658 (size 240): comm "syz-executor.0", pid 955, jiffies 4294780569 (age 16.449s) hex dump (first 32 bytes, cpu 1): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<00000000d830ea5a>] br_multicast_add_port+0x1c2/0x300 net/bridge/br_multicast.c:1693 [<00000000274d9a71>] new_nbp net/bridge/br_if.c:435 [inline] [<00000000274d9a71>] br_add_if+0x670/0x1740 net/bridge/br_if.c:611 [<0000000012ce888e>] do_set_master net/core/rtnetlink.c:2513 [inline] [<0000000012ce888e>] do_set_master+0x1aa/0x210 net/core/rtnetlink.c:2487 [<0000000099d1cafc>] __rtnl_newlink+0x1095/0x13e0 net/core/rtnetlink.c:3457 [<00000000a01facc0>] rtnl_newlink+0x64/0xa0 net/core/rtnetlink.c:3488 [<00000000acc9186c>] rtnetlink_rcv_msg+0x369/0xa10 net/core/rtnetlink.c:5550 [<00000000d4aabb9c>] netlink_rcv_skb+0x134/0x3d0 net/netlink/af_netlink.c:2504 [<00000000bc2e12a3>] netlink_unicast_kernel net/netlink/af_netlink.c:1314 [inline] [<00000000bc2e12a3>] netlink_unicast+0x4a0/0x6a0 net/netlink/af_netlink.c:1340 [<00000000e4dc2d0e>] netlink_sendmsg+0x789/0xc70 net/netlink/af_netlink.c:1929 [<000000000d22c8b3>] sock_sendmsg_nosec net/socket.c:654 [inline] [<000000000d22c8b3>] sock_sendmsg+0x139/0x170 net/socket.c:674 [<00000000e281417a>] ____sys_sendmsg+0x658/0x7d0 net/socket.c:2350 [<00000000237aa2ab>] ___sys_sendmsg+0xf8/0x170 net/socket.c:2404 [<000000004f2dc381>] __sys_sendmsg+0xd3/0x190 net/socket.c:2433 [<0000000005feca6c>] do_syscall_64+0x37/0x90 arch/x86/entry/common.c:47 [<000000007304477d>] entry_SYSCALL_64_after_hwframe+0x44/0xae On error path of br_add_if(), p->mcast_stats allocated in new_nbp() need be freed, or it will be leaked. Fixes: 1080ab95e3c7 ("net: bridge: add support for IGMP/MLD stats and export them via netlink") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Acked-by: Nikolay Aleksandrov <nikolay@nvidia.com> Link: https://lore.kernel.org/r/20210809132023.978546-1-yangyingliang@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-08-09 13:20:23 +00:00
br_multicast_del_port(p);
kobject_put(&p->kobj);
dev_set_allmulti(dev, -1);
err1:
dev_put(dev);
return err;
}
/* called with RTNL */
int br_del_if(struct net_bridge *br, struct net_device *dev)
{
struct net_bridge_port *p;
bool changed_addr;
p = br_port_get_rtnl(dev);
if (!p || p->br != br)
return -EINVAL;
/* Since more than one interface can be attached to a bridge,
* there still maybe an alternate path for netconsole to use;
* therefore there is no reason for a NETDEV_RELEASE event.
*/
del_nbp(p);
br_mtu_auto_adjust(br);
br_set_gso_limits(br);
spin_lock_bh(&br->lock);
changed_addr = br_stp_recalculate_bridge_id(br);
spin_unlock_bh(&br->lock);
if (changed_addr)
call_netdevice_notifiers(NETDEV_CHANGEADDR, br->dev);
netdev_update_features(br->dev);
return 0;
}
void br_port_flags_change(struct net_bridge_port *p, unsigned long mask)
{
struct net_bridge *br = p->br;
if (mask & BR_AUTO_MASK)
nbp_update_port_count(br);
if (mask & BR_NEIGH_SUPPRESS)
br_recalculate_neigh_suppress_enabled(br);
}
bool br_port_flag_is_set(const struct net_device *dev, unsigned long flag)
{
struct net_bridge_port *p;
p = br_port_get_rtnl_rcu(dev);
if (!p)
return false;
return p->flags & flag;
}
EXPORT_SYMBOL_GPL(br_port_flag_is_set);