linux/fs/xfs/xfs_icache.c

2240 lines
56 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (c) 2000-2005 Silicon Graphics, Inc.
* All Rights Reserved.
*/
#include "xfs.h"
#include "xfs_fs.h"
#include "xfs_shared.h"
#include "xfs_format.h"
#include "xfs_log_format.h"
#include "xfs_trans_resv.h"
#include "xfs_mount.h"
#include "xfs_inode.h"
#include "xfs_trans.h"
#include "xfs_trans_priv.h"
#include "xfs_inode_item.h"
#include "xfs_quota.h"
xfs: event tracing support Convert the old xfs tracing support that could only be used with the out of tree kdb and xfsidbg patches to use the generic event tracer. To use it make sure CONFIG_EVENT_TRACING is enabled and then enable all xfs trace channels by: echo 1 > /sys/kernel/debug/tracing/events/xfs/enable or alternatively enable single events by just doing the same in one event subdirectory, e.g. echo 1 > /sys/kernel/debug/tracing/events/xfs/xfs_ihold/enable or set more complex filters, etc. In Documentation/trace/events.txt all this is desctribed in more detail. To reads the events do a cat /sys/kernel/debug/tracing/trace Compared to the last posting this patch converts the tracing mostly to the one tracepoint per callsite model that other users of the new tracing facility also employ. This allows a very fine-grained control of the tracing, a cleaner output of the traces and also enables the perf tool to use each tracepoint as a virtual performance counter, allowing us to e.g. count how often certain workloads git various spots in XFS. Take a look at http://lwn.net/Articles/346470/ for some examples. Also the btree tracing isn't included at all yet, as it will require additional core tracing features not in mainline yet, I plan to deliver it later. And the really nice thing about this patch is that it actually removes many lines of code while adding this nice functionality: fs/xfs/Makefile | 8 fs/xfs/linux-2.6/xfs_acl.c | 1 fs/xfs/linux-2.6/xfs_aops.c | 52 - fs/xfs/linux-2.6/xfs_aops.h | 2 fs/xfs/linux-2.6/xfs_buf.c | 117 +-- fs/xfs/linux-2.6/xfs_buf.h | 33 fs/xfs/linux-2.6/xfs_fs_subr.c | 3 fs/xfs/linux-2.6/xfs_ioctl.c | 1 fs/xfs/linux-2.6/xfs_ioctl32.c | 1 fs/xfs/linux-2.6/xfs_iops.c | 1 fs/xfs/linux-2.6/xfs_linux.h | 1 fs/xfs/linux-2.6/xfs_lrw.c | 87 -- fs/xfs/linux-2.6/xfs_lrw.h | 45 - fs/xfs/linux-2.6/xfs_super.c | 104 --- fs/xfs/linux-2.6/xfs_super.h | 7 fs/xfs/linux-2.6/xfs_sync.c | 1 fs/xfs/linux-2.6/xfs_trace.c | 75 ++ fs/xfs/linux-2.6/xfs_trace.h | 1369 +++++++++++++++++++++++++++++++++++++++++ fs/xfs/linux-2.6/xfs_vnode.h | 4 fs/xfs/quota/xfs_dquot.c | 110 --- fs/xfs/quota/xfs_dquot.h | 21 fs/xfs/quota/xfs_qm.c | 40 - fs/xfs/quota/xfs_qm_syscalls.c | 4 fs/xfs/support/ktrace.c | 323 --------- fs/xfs/support/ktrace.h | 85 -- fs/xfs/xfs.h | 16 fs/xfs/xfs_ag.h | 14 fs/xfs/xfs_alloc.c | 230 +----- fs/xfs/xfs_alloc.h | 27 fs/xfs/xfs_alloc_btree.c | 1 fs/xfs/xfs_attr.c | 107 --- fs/xfs/xfs_attr.h | 10 fs/xfs/xfs_attr_leaf.c | 14 fs/xfs/xfs_attr_sf.h | 40 - fs/xfs/xfs_bmap.c | 507 +++------------ fs/xfs/xfs_bmap.h | 49 - fs/xfs/xfs_bmap_btree.c | 6 fs/xfs/xfs_btree.c | 5 fs/xfs/xfs_btree_trace.h | 17 fs/xfs/xfs_buf_item.c | 87 -- fs/xfs/xfs_buf_item.h | 20 fs/xfs/xfs_da_btree.c | 3 fs/xfs/xfs_da_btree.h | 7 fs/xfs/xfs_dfrag.c | 2 fs/xfs/xfs_dir2.c | 8 fs/xfs/xfs_dir2_block.c | 20 fs/xfs/xfs_dir2_leaf.c | 21 fs/xfs/xfs_dir2_node.c | 27 fs/xfs/xfs_dir2_sf.c | 26 fs/xfs/xfs_dir2_trace.c | 216 ------ fs/xfs/xfs_dir2_trace.h | 72 -- fs/xfs/xfs_filestream.c | 8 fs/xfs/xfs_fsops.c | 2 fs/xfs/xfs_iget.c | 111 --- fs/xfs/xfs_inode.c | 67 -- fs/xfs/xfs_inode.h | 76 -- fs/xfs/xfs_inode_item.c | 5 fs/xfs/xfs_iomap.c | 85 -- fs/xfs/xfs_iomap.h | 8 fs/xfs/xfs_log.c | 181 +---- fs/xfs/xfs_log_priv.h | 20 fs/xfs/xfs_log_recover.c | 1 fs/xfs/xfs_mount.c | 2 fs/xfs/xfs_quota.h | 8 fs/xfs/xfs_rename.c | 1 fs/xfs/xfs_rtalloc.c | 1 fs/xfs/xfs_rw.c | 3 fs/xfs/xfs_trans.h | 47 + fs/xfs/xfs_trans_buf.c | 62 - fs/xfs/xfs_vnodeops.c | 8 70 files changed, 2151 insertions(+), 2592 deletions(-) Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Alex Elder <aelder@sgi.com>
2009-12-14 23:14:59 +00:00
#include "xfs_trace.h"
#include "xfs_icache.h"
#include "xfs_bmap_util.h"
xfs: run an eofblocks scan on ENOSPC/EDQUOT From: Brian Foster <bfoster@redhat.com> Speculative preallocation and and the associated throttling metrics assume we're working with large files on large filesystems. Users have reported inefficiencies in these mechanisms when we happen to be dealing with large files on smaller filesystems. This can occur because while prealloc throttling is aggressive under low free space conditions, it is not active until we reach 5% free space or less. For example, a 40GB filesystem has enough space for several files large enough to have multi-GB preallocations at any given time. If those files are slow growing, they might reserve preallocation for long periods of time as well as avoid the background scanner due to frequent modification. If a new file is written under these conditions, said file has no access to this already reserved space and premature ENOSPC is imminent. To handle this scenario, modify the buffered write ENOSPC handling and retry sequence to invoke an eofblocks scan. In the smaller filesystem scenario, the eofblocks scan resets the usage of preallocation such that when the 5% free space threshold is met, throttling effectively takes over to provide fair and efficient preallocation until legitimate ENOSPC. The eofblocks scan is selective based on the nature of the failure. For example, an EDQUOT failure in a particular quota will use a filtered scan for that quota. Because we don't know which quota might have caused an allocation failure at any given time, we include each applicable quota determined to be under low free space conditions in the scan. Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2014-07-24 09:49:28 +00:00
#include "xfs_dquot_item.h"
#include "xfs_dquot.h"
#include "xfs_reflink.h"
#include "xfs_ialloc.h"
#include "xfs_ag.h"
xfs: xfs_is_shutdown vs xlog_is_shutdown cage fight I've been chasing a recent resurgence in generic/388 recovery failure and/or corruption events. The events have largely been uninitialised inode chunks being tripped over in log recovery such as: XFS (pmem1): User initiated shutdown received. pmem1: writeback error on inode 12621949, offset 1019904, sector 12968096 XFS (pmem1): Log I/O Error (0x6) detected at xfs_fs_goingdown+0xa3/0xf0 (fs/xfs/xfs_fsops.c:500). Shutting down filesystem. XFS (pmem1): Please unmount the filesystem and rectify the problem(s) XFS (pmem1): Unmounting Filesystem XFS (pmem1): Mounting V5 Filesystem XFS (pmem1): Starting recovery (logdev: internal) XFS (pmem1): bad inode magic/vsn daddr 8723584 #0 (magic=1818) XFS (pmem1): Metadata corruption detected at xfs_inode_buf_verify+0x180/0x190, xfs_inode block 0x851c80 xfs_inode_buf_verify XFS (pmem1): Unmount and run xfs_repair XFS (pmem1): First 128 bytes of corrupted metadata buffer: 00000000: 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 ................ 00000010: 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 ................ 00000020: 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 ................ 00000030: 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 ................ 00000040: 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 ................ 00000050: 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 ................ 00000060: 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 ................ 00000070: 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 ................ XFS (pmem1): metadata I/O error in "xlog_recover_items_pass2+0x52/0xc0" at daddr 0x851c80 len 32 error 117 XFS (pmem1): log mount/recovery failed: error -117 XFS (pmem1): log mount failed There have been isolated random other issues, too - xfs_repair fails because it finds some corruption in symlink blocks, rmap inconsistencies, etc - but they are nowhere near as common as the uninitialised inode chunk failure. The problem has clearly happened at runtime before recovery has run; I can see the ICREATE log item in the log shortly before the actively recovered range of the log. This means the ICREATE was definitely created and written to the log, but for some reason the tail of the log has been moved past the ordered buffer log item that tracks INODE_ALLOC buffers and, supposedly, prevents the tail of the log moving past the ICREATE log item before the inode chunk buffer is written to disk. Tracing the fsstress processes that are running when the filesystem shut down immediately pin-pointed the problem: user shutdown marks xfs_mount as shutdown godown-213341 [008] 6398.022871: console: [ 6397.915392] XFS (pmem1): User initiated shutdown received. ..... aild tries to push ordered inode cluster buffer xfsaild/pmem1-213314 [001] 6398.022974: xfs_buf_trylock: dev 259:1 daddr 0x851c80 bbcount 0x20 hold 16 pincount 0 lock 0 flags DONE|INODES|PAGES caller xfs_inode_item_push+0x8e xfsaild/pmem1-213314 [001] 6398.022976: xfs_ilock_nowait: dev 259:1 ino 0x851c80 flags ILOCK_SHARED caller xfs_iflush_cluster+0xae xfs_iflush_cluster() checks xfs_is_shutdown(), returns true, calls xfs_iflush_abort() to kill writeback of the inode. Inode is removed from AIL, drops cluster buffer reference. xfsaild/pmem1-213314 [001] 6398.022977: xfs_ail_delete: dev 259:1 lip 0xffff88880247ed80 old lsn 7/20344 new lsn 7/21000 type XFS_LI_INODE flags IN_AIL xfsaild/pmem1-213314 [001] 6398.022978: xfs_buf_rele: dev 259:1 daddr 0x851c80 bbcount 0x20 hold 17 pincount 0 lock 0 flags DONE|INODES|PAGES caller xfs_iflush_abort+0xd7 ..... All inodes on cluster buffer are aborted, then the cluster buffer itself is aborted and removed from the AIL *without writeback*: xfsaild/pmem1-213314 [001] 6398.023011: xfs_buf_error_relse: dev 259:1 daddr 0x851c80 bbcount 0x20 hold 2 pincount 0 lock 0 flags ASYNC|DONE|STALE|INODES|PAGES caller xfs_buf_ioend_fail+0x33 xfsaild/pmem1-213314 [001] 6398.023012: xfs_ail_delete: dev 259:1 lip 0xffff8888053efde8 old lsn 7/20344 new lsn 7/20344 type XFS_LI_BUF flags IN_AIL The inode buffer was at 7/20344 when it was removed from the AIL. xfsaild/pmem1-213314 [001] 6398.023012: xfs_buf_item_relse: dev 259:1 daddr 0x851c80 bbcount 0x20 hold 2 pincount 0 lock 0 flags ASYNC|DONE|STALE|INODES|PAGES caller xfs_buf_item_done+0x31 xfsaild/pmem1-213314 [001] 6398.023012: xfs_buf_rele: dev 259:1 daddr 0x851c80 bbcount 0x20 hold 2 pincount 0 lock 0 flags ASYNC|DONE|STALE|INODES|PAGES caller xfs_buf_item_relse+0x39 ..... Userspace is still running, doing stuff. an fsstress process runs syncfs() or sync() and we end up in sync_fs_one_sb() which issues a log force. This pushes on the CIL: fsstress-213322 [001] 6398.024430: xfs_fs_sync_fs: dev 259:1 m_features 0x20000000019ff6e9 opstate (clean|shutdown|inodegc|blockgc) s_flags 0x70810000 caller sync_fs_one_sb+0x26 fsstress-213322 [001] 6398.024430: xfs_log_force: dev 259:1 lsn 0x0 caller xfs_fs_sync_fs+0x82 fsstress-213322 [001] 6398.024430: xfs_log_force: dev 259:1 lsn 0x5f caller xfs_log_force+0x7c <...>-194402 [001] 6398.024467: kmem_alloc: size 176 flags 0x14 caller xlog_cil_push_work+0x9f And the CIL fills up iclogs with pending changes. This picks up the current tail from the AIL: <...>-194402 [001] 6398.024497: xlog_iclog_get_space: dev 259:1 state XLOG_STATE_ACTIVE refcnt 1 offset 0 lsn 0x0 flags caller xlog_write+0x149 <...>-194402 [001] 6398.024498: xlog_iclog_switch: dev 259:1 state XLOG_STATE_ACTIVE refcnt 1 offset 0 lsn 0x700005408 flags caller xlog_state_get_iclog_space+0x37e <...>-194402 [001] 6398.024521: xlog_iclog_release: dev 259:1 state XLOG_STATE_WANT_SYNC refcnt 1 offset 32256 lsn 0x700005408 flags caller xlog_write+0x5f9 <...>-194402 [001] 6398.024522: xfs_log_assign_tail_lsn: dev 259:1 new tail lsn 7/21000, old lsn 7/20344, last sync 7/21448 And it moves the tail of the log to 7/21000 from 7/20344. This *moves the tail of the log beyond the ICREATE transaction* that was at 7/20344 and pinned by the inode cluster buffer that was cancelled above. .... godown-213341 [008] 6398.027005: xfs_force_shutdown: dev 259:1 tag logerror flags log_io|force_umount file fs/xfs/xfs_fsops.c line_num 500 godown-213341 [008] 6398.027022: console: [ 6397.915406] pmem1: writeback error on inode 12621949, offset 1019904, sector 12968096 godown-213341 [008] 6398.030551: console: [ 6397.919546] XFS (pmem1): Log I/O Error (0x6) detected at xfs_fs_goingdown+0xa3/0xf0 (fs/ And finally the log itself is now shutdown, stopping all further writes to the log. But this is too late to prevent the corruption that moving the tail of the log forwards after we start cancelling writeback causes. The fundamental problem here is that we are using the wrong shutdown checks for log items. We've long conflated mount shutdown with log shutdown state, and I started separating that recently with the atomic shutdown state changes in commit b36d4651e165 ("xfs: make forced shutdown processing atomic"). The changes in that commit series are directly responsible for being able to diagnose this issue because it clearly separated mount shutdown from log shutdown. Essentially, once we start cancelling writeback of log items and removing them from the AIL because the filesystem is shut down, we *cannot* update the journal because we may have cancelled the items that pin the tail of the log. That moves the tail of the log forwards without having written the metadata back, hence we have corrupt in memory state and writing to the journal propagates that to the on-disk state. What commit b36d4651e165 makes clear is that log item state needs to change relative to log shutdown, not mount shutdown. IOWs, anything that aborts metadata writeback needs to check log shutdown state because log items directly affect log consistency. Having them check mount shutdown state introduces the above race condition where we cancel metadata writeback before the log shuts down. To fix this, this patch works through all log items and converts shutdown checks to use xlog_is_shutdown() rather than xfs_is_shutdown(), so that we don't start aborting metadata writeback before we shut off journal writes. AFAICT, this race condition is a zero day IO error handling bug in XFS that dates back to the introduction of XLOG_IO_ERROR, XLOG_STATE_IOERROR and XFS_FORCED_SHUTDOWN back in January 1997. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org>
2022-03-17 16:09:13 +00:00
#include "xfs_log_priv.h"
#include <linux/iversion.h>
/* Radix tree tags for incore inode tree. */
/* inode is to be reclaimed */
#define XFS_ICI_RECLAIM_TAG 0
/* Inode has speculative preallocations (posteof or cow) to clean. */
#define XFS_ICI_BLOCKGC_TAG 1
/*
* The goal for walking incore inodes. These can correspond with incore inode
* radix tree tags when convenient. Avoid existing XFS_IWALK namespace.
*/
enum xfs_icwalk_goal {
/* Goals directly associated with tagged inodes. */
XFS_ICWALK_BLOCKGC = XFS_ICI_BLOCKGC_TAG,
XFS_ICWALK_RECLAIM = XFS_ICI_RECLAIM_TAG,
};
static int xfs_icwalk(struct xfs_mount *mp,
enum xfs_icwalk_goal goal, struct xfs_icwalk *icw);
static int xfs_icwalk_ag(struct xfs_perag *pag,
enum xfs_icwalk_goal goal, struct xfs_icwalk *icw);
/*
* Private inode cache walk flags for struct xfs_icwalk. Must not
* coincide with XFS_ICWALK_FLAGS_VALID.
*/
/* Stop scanning after icw_scan_limit inodes. */
#define XFS_ICWALK_FLAG_SCAN_LIMIT (1U << 28)
#define XFS_ICWALK_FLAG_RECLAIM_SICK (1U << 27)
#define XFS_ICWALK_FLAG_UNION (1U << 26) /* union filter algorithm */
#define XFS_ICWALK_PRIVATE_FLAGS (XFS_ICWALK_FLAG_SCAN_LIMIT | \
XFS_ICWALK_FLAG_RECLAIM_SICK | \
XFS_ICWALK_FLAG_UNION)
/*
* Allocate and initialise an xfs_inode.
*/
xfs: recovery of swap extents operations for CRC filesystems This is the recovery side of the btree block owner change operation performed by swapext on CRC enabled filesystems. We detect that an owner change is needed by the flag that has been placed on the inode log format flag field. Because the inode recovery is being replayed after the buffers that make up the BMBT in the given checkpoint, we can walk all the buffers and directly modify them when we see the flag set on an inode. Because the inode can be relogged and hence present in multiple chekpoints with the "change owner" flag set, we could do multiple passes across the inode to do this change. While this isn't optimal, we can't directly ignore the flag as there may be multiple independent swap extent operations being replayed on the same inode in different checkpoints so we can't ignore them. Further, because the owner change operation uses ordered buffers, we might have buffers that are newer on disk than the current checkpoint and so already have the owner changed in them. Hence we cannot just peek at a buffer in the tree and check that it has the correct owner and assume that the change was completed. So, for the moment just brute force the owner change every time we see an inode with the flag set. Note that we have to be careful here because the owner of the buffers may point to either the old owner or the new owner. Currently the verifier can't verify the owner directly, so there is no failure case here right now. If we verify the owner exactly in future, then we'll have to take this into account. This was tested in terms of normal operation via xfstests - all of the fsr tests now pass without failure. however, we really need to modify xfs/227 to stress v3 inodes correctly to ensure we fully cover this case for v5 filesystems. In terms of recovery testing, I used a hacked version of xfs_fsr that held the temp inode open for a few seconds before exiting so that the filesystem could be shut down with an open owner change recovery flags set on at least the temp inode. fsr leaves the temp inode unlinked and in btree format, so this was necessary for the owner change to be reliably replayed. logprint confirmed the tmp inode in the log had the correct flag set: INO: cnt:3 total:3 a:0x69e9e0 len:56 a:0x69ea20 len:176 a:0x69eae0 len:88 INODE: #regs:3 ino:0x44 flags:0x209 dsize:88 ^^^^^ 0x200 is set, indicating a data fork owner change needed to be replayed on inode 0x44. A printk in the revoery code confirmed that the inode change was recovered: XFS (vdc): Mounting Filesystem XFS (vdc): Starting recovery (logdev: internal) recovering owner change ino 0x44 XFS (vdc): Version 5 superblock detected. This kernel L support enabled! Use of these features in this kernel is at your own risk! XFS (vdc): Ending recovery (logdev: internal) The script used to test this was: $ cat ./recovery-fsr.sh #!/bin/bash dev=/dev/vdc mntpt=/mnt/scratch testfile=$mntpt/testfile umount $mntpt mkfs.xfs -f -m crc=1 $dev mount $dev $mntpt chmod 777 $mntpt for i in `seq 10000 -1 0`; do xfs_io -f -d -c "pwrite $(($i * 4096)) 4096" $testfile > /dev/null 2>&1 done xfs_bmap -vp $testfile |head -20 xfs_fsr -d -v $testfile & sleep 10 /home/dave/src/xfstests-dev/src/godown -f $mntpt wait umount $mntpt xfs_logprint -t $dev |tail -20 time mount $dev $mntpt xfs_bmap -vp $testfile umount $mntpt $ Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Mark Tinguely <tinguely@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2013-08-30 00:23:45 +00:00
struct xfs_inode *
xfs_inode_alloc(
struct xfs_mount *mp,
xfs_ino_t ino)
{
struct xfs_inode *ip;
/*
* XXX: If this didn't occur in transactions, we could drop GFP_NOFAIL
* and return NULL here on ENOMEM.
*/
ip = alloc_inode_sb(mp->m_super, xfs_inode_cache, GFP_KERNEL | __GFP_NOFAIL);
if (inode_init_always(mp->m_super, VFS_I(ip))) {
kmem_cache_free(xfs_inode_cache, ip);
return NULL;
}
/* VFS doesn't initialise i_mode or i_state! */
VFS_I(ip)->i_mode = 0;
VFS_I(ip)->i_state = 0;
mapping_set_large_folios(VFS_I(ip)->i_mapping);
XFS_STATS_INC(mp, vn_active);
ASSERT(atomic_read(&ip->i_pincount) == 0);
ASSERT(ip->i_ino == 0);
/* initialise the xfs inode */
ip->i_ino = ino;
ip->i_mount = mp;
memset(&ip->i_imap, 0, sizeof(struct xfs_imap));
ip->i_cowfp = NULL;
xfs: make inode attribute forks a permanent part of struct xfs_inode Syzkaller reported a UAF bug a while back: ================================================================== BUG: KASAN: use-after-free in xfs_ilock_attr_map_shared+0xe3/0xf6 fs/xfs/xfs_inode.c:127 Read of size 4 at addr ffff88802cec919c by task syz-executor262/2958 CPU: 2 PID: 2958 Comm: syz-executor262 Not tainted 5.15.0-0.30.3-20220406_1406 #3 Hardware name: Red Hat KVM, BIOS 1.13.0-2.module+el8.3.0+7860+a7792d29 04/01/2014 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x82/0xa9 lib/dump_stack.c:106 print_address_description.constprop.9+0x21/0x2d5 mm/kasan/report.c:256 __kasan_report mm/kasan/report.c:442 [inline] kasan_report.cold.14+0x7f/0x11b mm/kasan/report.c:459 xfs_ilock_attr_map_shared+0xe3/0xf6 fs/xfs/xfs_inode.c:127 xfs_attr_get+0x378/0x4c2 fs/xfs/libxfs/xfs_attr.c:159 xfs_xattr_get+0xe3/0x150 fs/xfs/xfs_xattr.c:36 __vfs_getxattr+0xdf/0x13d fs/xattr.c:399 cap_inode_need_killpriv+0x41/0x5d security/commoncap.c:300 security_inode_need_killpriv+0x4c/0x97 security/security.c:1408 dentry_needs_remove_privs.part.28+0x21/0x63 fs/inode.c:1912 dentry_needs_remove_privs+0x80/0x9e fs/inode.c:1908 do_truncate+0xc3/0x1e0 fs/open.c:56 handle_truncate fs/namei.c:3084 [inline] do_open fs/namei.c:3432 [inline] path_openat+0x30ab/0x396d fs/namei.c:3561 do_filp_open+0x1c4/0x290 fs/namei.c:3588 do_sys_openat2+0x60d/0x98c fs/open.c:1212 do_sys_open+0xcf/0x13c fs/open.c:1228 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3a/0x7e arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0x0 RIP: 0033:0x7f7ef4bb753d Code: 00 c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 1b 79 2c 00 f7 d8 64 89 01 48 RSP: 002b:00007f7ef52c2ed8 EFLAGS: 00000246 ORIG_RAX: 0000000000000055 RAX: ffffffffffffffda RBX: 0000000000404148 RCX: 00007f7ef4bb753d RDX: 00007f7ef4bb753d RSI: 0000000000000000 RDI: 0000000020004fc0 RBP: 0000000000404140 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0030656c69662f2e R13: 00007ffd794db37f R14: 00007ffd794db470 R15: 00007f7ef52c2fc0 </TASK> Allocated by task 2953: kasan_save_stack+0x19/0x38 mm/kasan/common.c:38 kasan_set_track mm/kasan/common.c:46 [inline] set_alloc_info mm/kasan/common.c:434 [inline] __kasan_slab_alloc+0x68/0x7c mm/kasan/common.c:467 kasan_slab_alloc include/linux/kasan.h:254 [inline] slab_post_alloc_hook mm/slab.h:519 [inline] slab_alloc_node mm/slub.c:3213 [inline] slab_alloc mm/slub.c:3221 [inline] kmem_cache_alloc+0x11b/0x3eb mm/slub.c:3226 kmem_cache_zalloc include/linux/slab.h:711 [inline] xfs_ifork_alloc+0x25/0xa2 fs/xfs/libxfs/xfs_inode_fork.c:287 xfs_bmap_add_attrfork+0x3f2/0x9b1 fs/xfs/libxfs/xfs_bmap.c:1098 xfs_attr_set+0xe38/0x12a7 fs/xfs/libxfs/xfs_attr.c:746 xfs_xattr_set+0xeb/0x1a9 fs/xfs/xfs_xattr.c:59 __vfs_setxattr+0x11b/0x177 fs/xattr.c:180 __vfs_setxattr_noperm+0x128/0x5e0 fs/xattr.c:214 __vfs_setxattr_locked+0x1d4/0x258 fs/xattr.c:275 vfs_setxattr+0x154/0x33d fs/xattr.c:301 setxattr+0x216/0x29f fs/xattr.c:575 __do_sys_fsetxattr fs/xattr.c:632 [inline] __se_sys_fsetxattr fs/xattr.c:621 [inline] __x64_sys_fsetxattr+0x243/0x2fe fs/xattr.c:621 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3a/0x7e arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0x0 Freed by task 2949: kasan_save_stack+0x19/0x38 mm/kasan/common.c:38 kasan_set_track+0x1c/0x21 mm/kasan/common.c:46 kasan_set_free_info+0x20/0x30 mm/kasan/generic.c:360 ____kasan_slab_free mm/kasan/common.c:366 [inline] ____kasan_slab_free mm/kasan/common.c:328 [inline] __kasan_slab_free+0xe2/0x10e mm/kasan/common.c:374 kasan_slab_free include/linux/kasan.h:230 [inline] slab_free_hook mm/slub.c:1700 [inline] slab_free_freelist_hook mm/slub.c:1726 [inline] slab_free mm/slub.c:3492 [inline] kmem_cache_free+0xdc/0x3ce mm/slub.c:3508 xfs_attr_fork_remove+0x8d/0x132 fs/xfs/libxfs/xfs_attr_leaf.c:773 xfs_attr_sf_removename+0x5dd/0x6cb fs/xfs/libxfs/xfs_attr_leaf.c:822 xfs_attr_remove_iter+0x68c/0x805 fs/xfs/libxfs/xfs_attr.c:1413 xfs_attr_remove_args+0xb1/0x10d fs/xfs/libxfs/xfs_attr.c:684 xfs_attr_set+0xf1e/0x12a7 fs/xfs/libxfs/xfs_attr.c:802 xfs_xattr_set+0xeb/0x1a9 fs/xfs/xfs_xattr.c:59 __vfs_removexattr+0x106/0x16a fs/xattr.c:468 cap_inode_killpriv+0x24/0x47 security/commoncap.c:324 security_inode_killpriv+0x54/0xa1 security/security.c:1414 setattr_prepare+0x1a6/0x897 fs/attr.c:146 xfs_vn_change_ok+0x111/0x15e fs/xfs/xfs_iops.c:682 xfs_vn_setattr_size+0x5f/0x15a fs/xfs/xfs_iops.c:1065 xfs_vn_setattr+0x125/0x2ad fs/xfs/xfs_iops.c:1093 notify_change+0xae5/0x10a1 fs/attr.c:410 do_truncate+0x134/0x1e0 fs/open.c:64 handle_truncate fs/namei.c:3084 [inline] do_open fs/namei.c:3432 [inline] path_openat+0x30ab/0x396d fs/namei.c:3561 do_filp_open+0x1c4/0x290 fs/namei.c:3588 do_sys_openat2+0x60d/0x98c fs/open.c:1212 do_sys_open+0xcf/0x13c fs/open.c:1228 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3a/0x7e arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0x0 The buggy address belongs to the object at ffff88802cec9188 which belongs to the cache xfs_ifork of size 40 The buggy address is located 20 bytes inside of 40-byte region [ffff88802cec9188, ffff88802cec91b0) The buggy address belongs to the page: page:00000000c3af36a1 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x2cec9 flags: 0xfffffc0000200(slab|node=0|zone=1|lastcpupid=0x1fffff) raw: 000fffffc0000200 ffffea00009d2580 0000000600000006 ffff88801a9ffc80 raw: 0000000000000000 0000000080490049 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff88802cec9080: fb fb fb fc fc fa fb fb fb fb fc fc fb fb fb fb ffff88802cec9100: fb fc fc fb fb fb fb fb fc fc fb fb fb fb fb fc >ffff88802cec9180: fc fa fb fb fb fb fc fc fa fb fb fb fb fc fc fb ^ ffff88802cec9200: fb fb fb fb fc fc fb fb fb fb fb fc fc fb fb fb ffff88802cec9280: fb fb fc fc fa fb fb fb fb fc fc fa fb fb fb fb ================================================================== The root cause of this bug is the unlocked access to xfs_inode.i_afp from the getxattr code paths while trying to determine which ILOCK mode to use to stabilize the xattr data. Unfortunately, the VFS does not acquire i_rwsem when vfs_getxattr (or listxattr) call into the filesystem, which means that getxattr can race with a removexattr that's tearing down the attr fork and crash: xfs_attr_set: xfs_attr_get: xfs_attr_fork_remove: xfs_ilock_attr_map_shared: xfs_idestroy_fork(ip->i_afp); kmem_cache_free(xfs_ifork_cache, ip->i_afp); if (ip->i_afp && ip->i_afp = NULL; xfs_need_iread_extents(ip->i_afp)) <KABOOM> ip->i_forkoff = 0; Regrettably, the VFS is much more lax about i_rwsem and getxattr than is immediately obvious -- not only does it not guarantee that we hold i_rwsem, it actually doesn't guarantee that we *don't* hold it either. The getxattr system call won't acquire the lock before calling XFS, but the file capabilities code calls getxattr with and without i_rwsem held to determine if the "security.capabilities" xattr is set on the file. Fixing the VFS locking requires a treewide investigation into every code path that could touch an xattr and what i_rwsem state it expects or sets up. That could take years or even prove impossible; fortunately, we can fix this UAF problem inside XFS. An earlier version of this patch used smp_wmb in xfs_attr_fork_remove to ensure that i_forkoff is always zeroed before i_afp is set to null and changed the read paths to use smp_rmb before accessing i_forkoff and i_afp, which avoided these UAF problems. However, the patch author was too busy dealing with other problems in the meantime, and by the time he came back to this issue, the situation had changed a bit. On a modern system with selinux, each inode will always have at least one xattr for the selinux label, so it doesn't make much sense to keep incurring the extra pointer dereference. Furthermore, Allison's upcoming parent pointer patchset will also cause nearly every inode in the filesystem to have extended attributes. Therefore, make the inode attribute fork structure part of struct xfs_inode, at a cost of 40 more bytes. This patch adds a clunky if_present field where necessary to maintain the existing logic of xattr fork null pointer testing in the existing codebase. The next patch switches the logic over to XFS_IFORK_Q and it all goes away. Signed-off-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Dave Chinner <dchinner@redhat.com>
2022-07-09 17:56:06 +00:00
memset(&ip->i_af, 0, sizeof(ip->i_af));
ip->i_af.if_format = XFS_DINODE_FMT_EXTENTS;
memset(&ip->i_df, 0, sizeof(ip->i_df));
ip->i_flags = 0;
ip->i_delayed_blks = 0;
ip->i_diflags2 = mp->m_ino_geo.new_diflags2;
ip->i_nblocks = 0;
ip->i_forkoff = 0;
ip->i_sick = 0;
ip->i_checked = 0;
xfs: implement per-inode writeback completion queues When scheduling writeback of dirty file data in the page cache, XFS uses IO completion workqueue items to ensure that filesystem metadata only updates after the write completes successfully. This is essential for converting unwritten extents to real extents at the right time and performing COW remappings. Unfortunately, XFS queues each IO completion work item to an unbounded workqueue, which means that the kernel can spawn dozens of threads to try to handle the items quickly. These threads need to take the ILOCK to update file metadata, which results in heavy ILOCK contention if a large number of the work items target a single file, which is inefficient. Worse yet, the writeback completion threads get stuck waiting for the ILOCK while holding transaction reservations, which can use up all available log reservation space. When that happens, metadata updates to other parts of the filesystem grind to a halt, even if the filesystem could otherwise have handled it. Even worse, if one of the things grinding to a halt happens to be a thread in the middle of a defer-ops finish holding the same ILOCK and trying to obtain more log reservation having exhausted the permanent reservation, we now have an ABBA deadlock - writeback completion has a transaction reserved and wants the ILOCK, and someone else has the ILOCK and wants a transaction reservation. Therefore, we create a per-inode writeback io completion queue + work item. When writeback finishes, it can add the ioend to the per-inode queue and let the single worker item process that queue. This dramatically cuts down on the number of kworkers and ILOCK contention in the system, and seems to have eliminated an occasional deadlock I was seeing while running generic/476. Testing with a program that simulates a heavy random-write workload to a single file demonstrates that the number of kworkers drops from approximately 120 threads per file to 1, without dramatically changing write bandwidth or pagecache access latency. Note that we leave the xfs-conv workqueue's max_active alone because we still want to be able to run ioend processing for as many inodes as the system can handle. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Brian Foster <bfoster@redhat.com>
2019-04-15 20:13:20 +00:00
INIT_WORK(&ip->i_ioend_work, xfs_end_io);
INIT_LIST_HEAD(&ip->i_ioend_list);
spin_lock_init(&ip->i_ioend_lock);
xfs: double link the unlinked inode list Now we have forwards traversal via the incore inode in place, we now need to add back pointers to the incore inode to entirely replace the back reference cache. We use the same lookup semantics and constraints as for the forwards pointer lookups during unlinks, and so we can look up any inode in the unlinked list directly and update the list pointers, forwards or backwards, at any time. The only wrinkle in converting the unlinked list manipulations to use in-core previous pointers is that log recovery doesn't have the incore inode state built up so it can't just read in an inode and release it to finish off the unlink. Hence we need to modify the traversal in recovery to read one inode ahead before we release the inode at the head of the list. This populates the next->prev relationship sufficient to be able to replay the unlinked list and hence greatly simplify the runtime code. This recovery algorithm also requires that we actually remove inodes from the unlinked list one at a time as background inode inactivation will result in unlinked list removal racing with the building of the in-memory unlinked list state. We could serialise this by holding the AGI buffer lock when constructing the in memory state, but all that does is lockstep background processing with list building. It is much simpler to flush the inodegc immediately after releasing the inode so that it is unlinked immediately and there is no races present at all. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de>
2022-07-14 01:46:43 +00:00
ip->i_next_unlinked = NULLAGINO;
ip->i_prev_unlinked = 0;
return ip;
}
STATIC void
xfs_inode_free_callback(
struct rcu_head *head)
{
struct inode *inode = container_of(head, struct inode, i_rcu);
struct xfs_inode *ip = XFS_I(inode);
switch (VFS_I(ip)->i_mode & S_IFMT) {
case S_IFREG:
case S_IFDIR:
case S_IFLNK:
xfs_idestroy_fork(&ip->i_df);
break;
}
xfs_ifork_zap_attr(ip);
if (ip->i_cowfp) {
xfs_idestroy_fork(ip->i_cowfp);
kmem_cache_free(xfs_ifork_cache, ip->i_cowfp);
}
if (ip->i_itemp) {
ASSERT(!test_bit(XFS_LI_IN_AIL,
&ip->i_itemp->ili_item.li_flags));
xfs_inode_item_destroy(ip);
ip->i_itemp = NULL;
}
kmem_cache_free(xfs_inode_cache, ip);
xfs: xfs_inode_free() isn't RCU safe The xfs_inode freed in xfs_inode_free() has multiple allocated structures attached to it. We free these in xfs_inode_free() before we mark the inode as invalid, and before we run call_rcu() to queue the structure for freeing. Unfortunately, this freeing can race with other accesses that are in the RCU current grace period that have found the inode in the radix tree with a valid state. This includes xfs_iflush_cluster(), which calls xfs_inode_clean(), and that accesses the inode log item on the xfs_inode. The log item structure is freed in xfs_inode_free(), so there is the possibility we can be accessing freed memory in xfs_iflush_cluster() after validating the xfs_inode structure as being valid for this RCU context. Hence we can get spuriously incorrect clean state returned from such checks. This can lead to use thinking the inode is dirty when it is, in fact, clean, and so incorrectly attaching it to the buffer for IO and completion processing. This then leads to use-after-free situations on the xfs_inode itself if the IO completes after the current RCU grace period expires. The buffer callbacks will access the xfs_inode and try to do all sorts of things it shouldn't with freed memory. IOWs, xfs_iflush_cluster() only works correctly when racing with inode reclaim if the inode log item is present and correctly stating the inode is clean. If the inode is being freed, then reclaim has already made sure the inode is clean, and hence xfs_iflush_cluster can skip it. However, we are accessing the inode inode under RCU read lock protection and so also must ensure that all dynamically allocated memory we reference in this context is not freed until the RCU grace period expires. To fix this, move all the potential memory freeing into xfs_inode_free_callback() so that we are guarantee RCU protected lookup code will always have the memory structures it needs available during the RCU grace period that lookup races can occur in. Discovered-by: Brain Foster <bfoster@redhat.com> Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Dave Chinner <david@fromorbit.com>
2016-05-18 04:01:53 +00:00
}
2016-05-18 04:09:12 +00:00
static void
__xfs_inode_free(
struct xfs_inode *ip)
{
/* asserts to verify all state is correct here */
ASSERT(atomic_read(&ip->i_pincount) == 0);
ASSERT(!ip->i_itemp || list_empty(&ip->i_itemp->ili_item.li_bio_list));
2016-05-18 04:09:12 +00:00
XFS_STATS_DEC(ip->i_mount, vn_active);
call_rcu(&VFS_I(ip)->i_rcu, xfs_inode_free_callback);
}
xfs: xfs_inode_free() isn't RCU safe The xfs_inode freed in xfs_inode_free() has multiple allocated structures attached to it. We free these in xfs_inode_free() before we mark the inode as invalid, and before we run call_rcu() to queue the structure for freeing. Unfortunately, this freeing can race with other accesses that are in the RCU current grace period that have found the inode in the radix tree with a valid state. This includes xfs_iflush_cluster(), which calls xfs_inode_clean(), and that accesses the inode log item on the xfs_inode. The log item structure is freed in xfs_inode_free(), so there is the possibility we can be accessing freed memory in xfs_iflush_cluster() after validating the xfs_inode structure as being valid for this RCU context. Hence we can get spuriously incorrect clean state returned from such checks. This can lead to use thinking the inode is dirty when it is, in fact, clean, and so incorrectly attaching it to the buffer for IO and completion processing. This then leads to use-after-free situations on the xfs_inode itself if the IO completes after the current RCU grace period expires. The buffer callbacks will access the xfs_inode and try to do all sorts of things it shouldn't with freed memory. IOWs, xfs_iflush_cluster() only works correctly when racing with inode reclaim if the inode log item is present and correctly stating the inode is clean. If the inode is being freed, then reclaim has already made sure the inode is clean, and hence xfs_iflush_cluster can skip it. However, we are accessing the inode inode under RCU read lock protection and so also must ensure that all dynamically allocated memory we reference in this context is not freed until the RCU grace period expires. To fix this, move all the potential memory freeing into xfs_inode_free_callback() so that we are guarantee RCU protected lookup code will always have the memory structures it needs available during the RCU grace period that lookup races can occur in. Discovered-by: Brain Foster <bfoster@redhat.com> Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Dave Chinner <david@fromorbit.com>
2016-05-18 04:01:53 +00:00
void
xfs_inode_free(
struct xfs_inode *ip)
{
ASSERT(!xfs_iflags_test(ip, XFS_IFLUSHING));
/*
* Because we use RCU freeing we need to ensure the inode always
* appears to be reclaimed with an invalid inode number when in the
* free state. The ip->i_flags_lock provides the barrier against lookup
* races.
*/
spin_lock(&ip->i_flags_lock);
ip->i_flags = XFS_IRECLAIM;
ip->i_ino = 0;
spin_unlock(&ip->i_flags_lock);
2016-05-18 04:09:12 +00:00
__xfs_inode_free(ip);
}
/*
* Queue background inode reclaim work if there are reclaimable inodes and there
* isn't reclaim work already scheduled or in progress.
*/
static void
xfs_reclaim_work_queue(
struct xfs_mount *mp)
{
rcu_read_lock();
if (radix_tree_tagged(&mp->m_perag_tree, XFS_ICI_RECLAIM_TAG)) {
queue_delayed_work(mp->m_reclaim_workqueue, &mp->m_reclaim_work,
msecs_to_jiffies(xfs_syncd_centisecs / 6 * 10));
}
rcu_read_unlock();
}
/*
* Background scanning to trim preallocated space. This is queued based on the
* 'speculative_prealloc_lifetime' tunable (5m by default).
*/
static inline void
xfs_blockgc_queue(
struct xfs_perag *pag)
{
struct xfs_mount *mp = pag->pag_mount;
if (!xfs_is_blockgc_enabled(mp))
return;
rcu_read_lock();
if (radix_tree_tagged(&pag->pag_ici_root, XFS_ICI_BLOCKGC_TAG))
xfs: per-cpu deferred inode inactivation queues Move inode inactivation to background work contexts so that it no longer runs in the context that releases the final reference to an inode. This will allow process work that ends up blocking on inactivation to continue doing work while the filesytem processes the inactivation in the background. A typical demonstration of this is unlinking an inode with lots of extents. The extents are removed during inactivation, so this blocks the process that unlinked the inode from the directory structure. By moving the inactivation to the background process, the userspace applicaiton can keep working (e.g. unlinking the next inode in the directory) while the inactivation work on the previous inode is done by a different CPU. The implementation of the queue is relatively simple. We use a per-cpu lockless linked list (llist) to queue inodes for inactivation without requiring serialisation mechanisms, and a work item to allow the queue to be processed by a CPU bound worker thread. We also keep a count of the queue depth so that we can trigger work after a number of deferred inactivations have been queued. The use of a bound workqueue with a single work depth allows the workqueue to run one work item per CPU. We queue the work item on the CPU we are currently running on, and so this essentially gives us affine per-cpu worker threads for the per-cpu queues. THis maintains the effective CPU affinity that occurs within XFS at the AG level due to all objects in a directory being local to an AG. Hence inactivation work tends to run on the same CPU that last accessed all the objects that inactivation accesses and this maintains hot CPU caches for unlink workloads. A depth of 32 inodes was chosen to match the number of inodes in an inode cluster buffer. This hopefully allows sequential allocation/unlink behaviours to defering inactivation of all the inodes in a single cluster buffer at a time, further helping maintain hot CPU and buffer cache accesses while running inactivations. A hard per-cpu queue throttle of 256 inode has been set to avoid runaway queuing when inodes that take a long to time inactivate are being processed. For example, when unlinking inodes with large numbers of extents that can take a lot of processing to free. Signed-off-by: Dave Chinner <dchinner@redhat.com> [djwong: tweak comments and tracepoints, convert opflags to state bits] Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org>
2021-08-06 18:05:39 +00:00
queue_delayed_work(pag->pag_mount->m_blockgc_wq,
&pag->pag_blockgc_work,
msecs_to_jiffies(xfs_blockgc_secs * 1000));
rcu_read_unlock();
}
/* Set a tag on both the AG incore inode tree and the AG radix tree. */
static void
xfs_perag_set_inode_tag(
struct xfs_perag *pag,
xfs_agino_t agino,
unsigned int tag)
{
struct xfs_mount *mp = pag->pag_mount;
bool was_tagged;
lockdep_assert_held(&pag->pag_ici_lock);
was_tagged = radix_tree_tagged(&pag->pag_ici_root, tag);
radix_tree_tag_set(&pag->pag_ici_root, agino, tag);
if (tag == XFS_ICI_RECLAIM_TAG)
pag->pag_ici_reclaimable++;
if (was_tagged)
return;
/* propagate the tag up into the perag radix tree */
spin_lock(&mp->m_perag_lock);
radix_tree_tag_set(&mp->m_perag_tree, pag->pag_agno, tag);
spin_unlock(&mp->m_perag_lock);
/* start background work */
switch (tag) {
case XFS_ICI_RECLAIM_TAG:
xfs_reclaim_work_queue(mp);
break;
case XFS_ICI_BLOCKGC_TAG:
xfs_blockgc_queue(pag);
break;
}
trace_xfs_perag_set_inode_tag(pag, _RET_IP_);
}
/* Clear a tag on both the AG incore inode tree and the AG radix tree. */
static void
xfs_perag_clear_inode_tag(
struct xfs_perag *pag,
xfs_agino_t agino,
unsigned int tag)
{
struct xfs_mount *mp = pag->pag_mount;
lockdep_assert_held(&pag->pag_ici_lock);
/*
* Reclaim can signal (with a null agino) that it cleared its own tag
* by removing the inode from the radix tree.
*/
if (agino != NULLAGINO)
radix_tree_tag_clear(&pag->pag_ici_root, agino, tag);
else
ASSERT(tag == XFS_ICI_RECLAIM_TAG);
if (tag == XFS_ICI_RECLAIM_TAG)
pag->pag_ici_reclaimable--;
if (radix_tree_tagged(&pag->pag_ici_root, tag))
return;
/* clear the tag from the perag radix tree */
spin_lock(&mp->m_perag_lock);
radix_tree_tag_clear(&mp->m_perag_tree, pag->pag_agno, tag);
spin_unlock(&mp->m_perag_lock);
trace_xfs_perag_clear_inode_tag(pag, _RET_IP_);
}
/*
* When we recycle a reclaimable inode, we need to re-initialise the VFS inode
* part of the structure. This is made more complex by the fact we store
* information about the on-disk values in the VFS inode and so we can't just
* overwrite the values unconditionally. Hence we save the parameters we
* need to retain across reinitialisation, and rewrite them into the VFS inode
* after reinitialisation even if it fails.
*/
static int
xfs_reinit_inode(
struct xfs_mount *mp,
struct inode *inode)
{
int error;
uint32_t nlink = inode->i_nlink;
uint32_t generation = inode->i_generation;
uint64_t version = inode_peek_iversion(inode);
umode_t mode = inode->i_mode;
dev_t dev = inode->i_rdev;
kuid_t uid = inode->i_uid;
kgid_t gid = inode->i_gid;
error = inode_init_always(mp->m_super, inode);
set_nlink(inode, nlink);
inode->i_generation = generation;
inode_set_iversion_queried(inode, version);
inode->i_mode = mode;
inode->i_rdev = dev;
inode->i_uid = uid;
inode->i_gid = gid;
mapping_set_large_folios(inode->i_mapping);
return error;
}
/*
* Carefully nudge an inode whose VFS state has been torn down back into a
* usable state. Drops the i_flags_lock and the rcu read lock.
*/
static int
xfs_iget_recycle(
struct xfs_perag *pag,
struct xfs_inode *ip) __releases(&ip->i_flags_lock)
{
struct xfs_mount *mp = ip->i_mount;
struct inode *inode = VFS_I(ip);
int error;
trace_xfs_iget_recycle(ip);
if (!xfs_ilock_nowait(ip, XFS_ILOCK_EXCL))
return -EAGAIN;
/*
* We need to make it look like the inode is being reclaimed to prevent
* the actual reclaim workers from stomping over us while we recycle
* the inode. We can't clear the radix tree tag yet as it requires
* pag_ici_lock to be held exclusive.
*/
ip->i_flags |= XFS_IRECLAIM;
spin_unlock(&ip->i_flags_lock);
rcu_read_unlock();
ASSERT(!rwsem_is_locked(&inode->i_rwsem));
error = xfs_reinit_inode(mp, inode);
xfs_iunlock(ip, XFS_ILOCK_EXCL);
if (error) {
/*
* Re-initializing the inode failed, and we are in deep
* trouble. Try to re-add it to the reclaim list.
*/
rcu_read_lock();
spin_lock(&ip->i_flags_lock);
ip->i_flags &= ~(XFS_INEW | XFS_IRECLAIM);
ASSERT(ip->i_flags & XFS_IRECLAIMABLE);
spin_unlock(&ip->i_flags_lock);
rcu_read_unlock();
trace_xfs_iget_recycle_fail(ip);
return error;
}
spin_lock(&pag->pag_ici_lock);
spin_lock(&ip->i_flags_lock);
/*
* Clear the per-lifetime state in the inode as we are now effectively
* a new inode and need to return to the initial state before reuse
* occurs.
*/
ip->i_flags &= ~XFS_IRECLAIM_RESET_FLAGS;
ip->i_flags |= XFS_INEW;
xfs_perag_clear_inode_tag(pag, XFS_INO_TO_AGINO(mp, ip->i_ino),
XFS_ICI_RECLAIM_TAG);
inode->i_state = I_NEW;
spin_unlock(&ip->i_flags_lock);
spin_unlock(&pag->pag_ici_lock);
return 0;
}
xfs: validate cached inodes are free when allocated A recent fuzzed filesystem image cached random dcache corruption when the reproducer was run. This often showed up as panics in lookup_slow() on a null inode->i_ops pointer when doing pathwalks. BUG: unable to handle kernel NULL pointer dereference at 0000000000000000 .... Call Trace: lookup_slow+0x44/0x60 walk_component+0x3dd/0x9f0 link_path_walk+0x4a7/0x830 path_lookupat+0xc1/0x470 filename_lookup+0x129/0x270 user_path_at_empty+0x36/0x40 path_listxattr+0x98/0x110 SyS_listxattr+0x13/0x20 do_syscall_64+0xf5/0x280 entry_SYSCALL_64_after_hwframe+0x42/0xb7 but had many different failure modes including deadlocks trying to lock the inode that was just allocated or KASAN reports of use-after-free violations. The cause of the problem was a corrupt INOBT on a v4 fs where the root inode was marked as free in the inobt record. Hence when we allocated an inode, it chose the root inode to allocate, found it in the cache and re-initialised it. We recently fixed a similar inode allocation issue caused by inobt record corruption problem in xfs_iget_cache_miss() in commit ee457001ed6c ("xfs: catch inode allocation state mismatch corruption"). This change adds similar checks to the cache-hit path to catch it, and turns the reproducer into a corruption shutdown situation. Reported-by: Wen Xu <wen.xu@gatech.edu> Signed-Off-By: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> [darrick: fix typos in comment] Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2018-04-18 00:17:34 +00:00
/*
* If we are allocating a new inode, then check what was returned is
* actually a free, empty inode. If we are not allocating an inode,
* then check we didn't find a free inode.
*
* Returns:
* 0 if the inode free state matches the lookup context
* -ENOENT if the inode is free and we are not allocating
* -EFSCORRUPTED if there is any state mismatch at all
*/
static int
xfs_iget_check_free_state(
struct xfs_inode *ip,
int flags)
{
if (flags & XFS_IGET_CREATE) {
/* should be a free inode */
if (VFS_I(ip)->i_mode != 0) {
xfs_warn(ip->i_mount,
"Corruption detected! Free inode 0x%llx not marked free! (mode 0x%x)",
ip->i_ino, VFS_I(ip)->i_mode);
return -EFSCORRUPTED;
}
if (ip->i_nblocks != 0) {
xfs: validate cached inodes are free when allocated A recent fuzzed filesystem image cached random dcache corruption when the reproducer was run. This often showed up as panics in lookup_slow() on a null inode->i_ops pointer when doing pathwalks. BUG: unable to handle kernel NULL pointer dereference at 0000000000000000 .... Call Trace: lookup_slow+0x44/0x60 walk_component+0x3dd/0x9f0 link_path_walk+0x4a7/0x830 path_lookupat+0xc1/0x470 filename_lookup+0x129/0x270 user_path_at_empty+0x36/0x40 path_listxattr+0x98/0x110 SyS_listxattr+0x13/0x20 do_syscall_64+0xf5/0x280 entry_SYSCALL_64_after_hwframe+0x42/0xb7 but had many different failure modes including deadlocks trying to lock the inode that was just allocated or KASAN reports of use-after-free violations. The cause of the problem was a corrupt INOBT on a v4 fs where the root inode was marked as free in the inobt record. Hence when we allocated an inode, it chose the root inode to allocate, found it in the cache and re-initialised it. We recently fixed a similar inode allocation issue caused by inobt record corruption problem in xfs_iget_cache_miss() in commit ee457001ed6c ("xfs: catch inode allocation state mismatch corruption"). This change adds similar checks to the cache-hit path to catch it, and turns the reproducer into a corruption shutdown situation. Reported-by: Wen Xu <wen.xu@gatech.edu> Signed-Off-By: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> [darrick: fix typos in comment] Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2018-04-18 00:17:34 +00:00
xfs_warn(ip->i_mount,
"Corruption detected! Free inode 0x%llx has blocks allocated!",
ip->i_ino);
return -EFSCORRUPTED;
}
return 0;
}
/* should be an allocated inode */
if (VFS_I(ip)->i_mode == 0)
return -ENOENT;
return 0;
}
xfs: per-cpu deferred inode inactivation queues Move inode inactivation to background work contexts so that it no longer runs in the context that releases the final reference to an inode. This will allow process work that ends up blocking on inactivation to continue doing work while the filesytem processes the inactivation in the background. A typical demonstration of this is unlinking an inode with lots of extents. The extents are removed during inactivation, so this blocks the process that unlinked the inode from the directory structure. By moving the inactivation to the background process, the userspace applicaiton can keep working (e.g. unlinking the next inode in the directory) while the inactivation work on the previous inode is done by a different CPU. The implementation of the queue is relatively simple. We use a per-cpu lockless linked list (llist) to queue inodes for inactivation without requiring serialisation mechanisms, and a work item to allow the queue to be processed by a CPU bound worker thread. We also keep a count of the queue depth so that we can trigger work after a number of deferred inactivations have been queued. The use of a bound workqueue with a single work depth allows the workqueue to run one work item per CPU. We queue the work item on the CPU we are currently running on, and so this essentially gives us affine per-cpu worker threads for the per-cpu queues. THis maintains the effective CPU affinity that occurs within XFS at the AG level due to all objects in a directory being local to an AG. Hence inactivation work tends to run on the same CPU that last accessed all the objects that inactivation accesses and this maintains hot CPU caches for unlink workloads. A depth of 32 inodes was chosen to match the number of inodes in an inode cluster buffer. This hopefully allows sequential allocation/unlink behaviours to defering inactivation of all the inodes in a single cluster buffer at a time, further helping maintain hot CPU and buffer cache accesses while running inactivations. A hard per-cpu queue throttle of 256 inode has been set to avoid runaway queuing when inodes that take a long to time inactivate are being processed. For example, when unlinking inodes with large numbers of extents that can take a lot of processing to free. Signed-off-by: Dave Chinner <dchinner@redhat.com> [djwong: tweak comments and tracepoints, convert opflags to state bits] Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org>
2021-08-06 18:05:39 +00:00
/* Make all pending inactivation work start immediately. */
xfs: fix xfs_inodegc_stop racing with mod_delayed_work syzbot reported this warning from the faux inodegc shrinker that tries to kick off inodegc work: ------------[ cut here ]------------ WARNING: CPU: 1 PID: 102 at kernel/workqueue.c:1445 __queue_work+0xd44/0x1120 kernel/workqueue.c:1444 RIP: 0010:__queue_work+0xd44/0x1120 kernel/workqueue.c:1444 Call Trace: __queue_delayed_work+0x1c8/0x270 kernel/workqueue.c:1672 mod_delayed_work_on+0xe1/0x220 kernel/workqueue.c:1746 xfs_inodegc_shrinker_scan fs/xfs/xfs_icache.c:2212 [inline] xfs_inodegc_shrinker_scan+0x250/0x4f0 fs/xfs/xfs_icache.c:2191 do_shrink_slab+0x428/0xaa0 mm/vmscan.c:853 shrink_slab+0x175/0x660 mm/vmscan.c:1013 shrink_one+0x502/0x810 mm/vmscan.c:5343 shrink_many mm/vmscan.c:5394 [inline] lru_gen_shrink_node mm/vmscan.c:5511 [inline] shrink_node+0x2064/0x35f0 mm/vmscan.c:6459 kswapd_shrink_node mm/vmscan.c:7262 [inline] balance_pgdat+0xa02/0x1ac0 mm/vmscan.c:7452 kswapd+0x677/0xd60 mm/vmscan.c:7712 kthread+0x2e8/0x3a0 kernel/kthread.c:376 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:308 This warning corresponds to this code in __queue_work: /* * For a draining wq, only works from the same workqueue are * allowed. The __WQ_DESTROYING helps to spot the issue that * queues a new work item to a wq after destroy_workqueue(wq). */ if (unlikely(wq->flags & (__WQ_DESTROYING | __WQ_DRAINING) && WARN_ON_ONCE(!is_chained_work(wq)))) return; For this to trip, we must have a thread draining the inodedgc workqueue and a second thread trying to queue inodegc work to that workqueue. This can happen if freezing or a ro remount race with reclaim poking our faux inodegc shrinker and another thread dropping an unlinked O_RDONLY file: Thread 0 Thread 1 Thread 2 xfs_inodegc_stop xfs_inodegc_shrinker_scan xfs_is_inodegc_enabled <yes, will continue> xfs_clear_inodegc_enabled xfs_inodegc_queue_all <list empty, do not queue inodegc worker> xfs_inodegc_queue <add to list> xfs_is_inodegc_enabled <no, returns> drain_workqueue <set WQ_DRAINING> llist_empty <no, will queue list> mod_delayed_work_on(..., 0) __queue_work <sees WQ_DRAINING, kaboom> In other words, everything between the access to inodegc_enabled state and the decision to poke the inodegc workqueue requires some kind of coordination to avoid the WQ_DRAINING state. We could perhaps introduce a lock here, but we could also try to eliminate WQ_DRAINING from the picture. We could replace the drain_workqueue call with a loop that flushes the workqueue and queues workers as long as there is at least one inode present in the per-cpu inodegc llists. We've disabled inodegc at this point, so we know that the number of queued inodes will eventually hit zero as long as xfs_inodegc_start cannot reactivate the workers. There are four callers of xfs_inodegc_start. Three of them come from the VFS with s_umount held: filesystem thawing, failed filesystem freezing, and the rw remount transition. The fourth caller is mounting rw (no remount or freezing possible). There are three callers ofs xfs_inodegc_stop. One is unmounting (no remount or thaw possible). Two of them come from the VFS with s_umount held: fs freezing and ro remount transition. Hence, it is correct to replace the drain_workqueue call with a loop that drains the inodegc llists. Fixes: 6191cf3ad59f ("xfs: flush inodegc workqueue tasks before cancel") Signed-off-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2023-05-01 23:16:14 +00:00
static bool
xfs: per-cpu deferred inode inactivation queues Move inode inactivation to background work contexts so that it no longer runs in the context that releases the final reference to an inode. This will allow process work that ends up blocking on inactivation to continue doing work while the filesytem processes the inactivation in the background. A typical demonstration of this is unlinking an inode with lots of extents. The extents are removed during inactivation, so this blocks the process that unlinked the inode from the directory structure. By moving the inactivation to the background process, the userspace applicaiton can keep working (e.g. unlinking the next inode in the directory) while the inactivation work on the previous inode is done by a different CPU. The implementation of the queue is relatively simple. We use a per-cpu lockless linked list (llist) to queue inodes for inactivation without requiring serialisation mechanisms, and a work item to allow the queue to be processed by a CPU bound worker thread. We also keep a count of the queue depth so that we can trigger work after a number of deferred inactivations have been queued. The use of a bound workqueue with a single work depth allows the workqueue to run one work item per CPU. We queue the work item on the CPU we are currently running on, and so this essentially gives us affine per-cpu worker threads for the per-cpu queues. THis maintains the effective CPU affinity that occurs within XFS at the AG level due to all objects in a directory being local to an AG. Hence inactivation work tends to run on the same CPU that last accessed all the objects that inactivation accesses and this maintains hot CPU caches for unlink workloads. A depth of 32 inodes was chosen to match the number of inodes in an inode cluster buffer. This hopefully allows sequential allocation/unlink behaviours to defering inactivation of all the inodes in a single cluster buffer at a time, further helping maintain hot CPU and buffer cache accesses while running inactivations. A hard per-cpu queue throttle of 256 inode has been set to avoid runaway queuing when inodes that take a long to time inactivate are being processed. For example, when unlinking inodes with large numbers of extents that can take a lot of processing to free. Signed-off-by: Dave Chinner <dchinner@redhat.com> [djwong: tweak comments and tracepoints, convert opflags to state bits] Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org>
2021-08-06 18:05:39 +00:00
xfs_inodegc_queue_all(
struct xfs_mount *mp)
{
struct xfs_inodegc *gc;
int cpu;
xfs: fix xfs_inodegc_stop racing with mod_delayed_work syzbot reported this warning from the faux inodegc shrinker that tries to kick off inodegc work: ------------[ cut here ]------------ WARNING: CPU: 1 PID: 102 at kernel/workqueue.c:1445 __queue_work+0xd44/0x1120 kernel/workqueue.c:1444 RIP: 0010:__queue_work+0xd44/0x1120 kernel/workqueue.c:1444 Call Trace: __queue_delayed_work+0x1c8/0x270 kernel/workqueue.c:1672 mod_delayed_work_on+0xe1/0x220 kernel/workqueue.c:1746 xfs_inodegc_shrinker_scan fs/xfs/xfs_icache.c:2212 [inline] xfs_inodegc_shrinker_scan+0x250/0x4f0 fs/xfs/xfs_icache.c:2191 do_shrink_slab+0x428/0xaa0 mm/vmscan.c:853 shrink_slab+0x175/0x660 mm/vmscan.c:1013 shrink_one+0x502/0x810 mm/vmscan.c:5343 shrink_many mm/vmscan.c:5394 [inline] lru_gen_shrink_node mm/vmscan.c:5511 [inline] shrink_node+0x2064/0x35f0 mm/vmscan.c:6459 kswapd_shrink_node mm/vmscan.c:7262 [inline] balance_pgdat+0xa02/0x1ac0 mm/vmscan.c:7452 kswapd+0x677/0xd60 mm/vmscan.c:7712 kthread+0x2e8/0x3a0 kernel/kthread.c:376 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:308 This warning corresponds to this code in __queue_work: /* * For a draining wq, only works from the same workqueue are * allowed. The __WQ_DESTROYING helps to spot the issue that * queues a new work item to a wq after destroy_workqueue(wq). */ if (unlikely(wq->flags & (__WQ_DESTROYING | __WQ_DRAINING) && WARN_ON_ONCE(!is_chained_work(wq)))) return; For this to trip, we must have a thread draining the inodedgc workqueue and a second thread trying to queue inodegc work to that workqueue. This can happen if freezing or a ro remount race with reclaim poking our faux inodegc shrinker and another thread dropping an unlinked O_RDONLY file: Thread 0 Thread 1 Thread 2 xfs_inodegc_stop xfs_inodegc_shrinker_scan xfs_is_inodegc_enabled <yes, will continue> xfs_clear_inodegc_enabled xfs_inodegc_queue_all <list empty, do not queue inodegc worker> xfs_inodegc_queue <add to list> xfs_is_inodegc_enabled <no, returns> drain_workqueue <set WQ_DRAINING> llist_empty <no, will queue list> mod_delayed_work_on(..., 0) __queue_work <sees WQ_DRAINING, kaboom> In other words, everything between the access to inodegc_enabled state and the decision to poke the inodegc workqueue requires some kind of coordination to avoid the WQ_DRAINING state. We could perhaps introduce a lock here, but we could also try to eliminate WQ_DRAINING from the picture. We could replace the drain_workqueue call with a loop that flushes the workqueue and queues workers as long as there is at least one inode present in the per-cpu inodegc llists. We've disabled inodegc at this point, so we know that the number of queued inodes will eventually hit zero as long as xfs_inodegc_start cannot reactivate the workers. There are four callers of xfs_inodegc_start. Three of them come from the VFS with s_umount held: filesystem thawing, failed filesystem freezing, and the rw remount transition. The fourth caller is mounting rw (no remount or freezing possible). There are three callers ofs xfs_inodegc_stop. One is unmounting (no remount or thaw possible). Two of them come from the VFS with s_umount held: fs freezing and ro remount transition. Hence, it is correct to replace the drain_workqueue call with a loop that drains the inodegc llists. Fixes: 6191cf3ad59f ("xfs: flush inodegc workqueue tasks before cancel") Signed-off-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2023-05-01 23:16:14 +00:00
bool ret = false;
xfs: per-cpu deferred inode inactivation queues Move inode inactivation to background work contexts so that it no longer runs in the context that releases the final reference to an inode. This will allow process work that ends up blocking on inactivation to continue doing work while the filesytem processes the inactivation in the background. A typical demonstration of this is unlinking an inode with lots of extents. The extents are removed during inactivation, so this blocks the process that unlinked the inode from the directory structure. By moving the inactivation to the background process, the userspace applicaiton can keep working (e.g. unlinking the next inode in the directory) while the inactivation work on the previous inode is done by a different CPU. The implementation of the queue is relatively simple. We use a per-cpu lockless linked list (llist) to queue inodes for inactivation without requiring serialisation mechanisms, and a work item to allow the queue to be processed by a CPU bound worker thread. We also keep a count of the queue depth so that we can trigger work after a number of deferred inactivations have been queued. The use of a bound workqueue with a single work depth allows the workqueue to run one work item per CPU. We queue the work item on the CPU we are currently running on, and so this essentially gives us affine per-cpu worker threads for the per-cpu queues. THis maintains the effective CPU affinity that occurs within XFS at the AG level due to all objects in a directory being local to an AG. Hence inactivation work tends to run on the same CPU that last accessed all the objects that inactivation accesses and this maintains hot CPU caches for unlink workloads. A depth of 32 inodes was chosen to match the number of inodes in an inode cluster buffer. This hopefully allows sequential allocation/unlink behaviours to defering inactivation of all the inodes in a single cluster buffer at a time, further helping maintain hot CPU and buffer cache accesses while running inactivations. A hard per-cpu queue throttle of 256 inode has been set to avoid runaway queuing when inodes that take a long to time inactivate are being processed. For example, when unlinking inodes with large numbers of extents that can take a lot of processing to free. Signed-off-by: Dave Chinner <dchinner@redhat.com> [djwong: tweak comments and tracepoints, convert opflags to state bits] Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org>
2021-08-06 18:05:39 +00:00
for_each_cpu(cpu, &mp->m_inodegc_cpumask) {
xfs: per-cpu deferred inode inactivation queues Move inode inactivation to background work contexts so that it no longer runs in the context that releases the final reference to an inode. This will allow process work that ends up blocking on inactivation to continue doing work while the filesytem processes the inactivation in the background. A typical demonstration of this is unlinking an inode with lots of extents. The extents are removed during inactivation, so this blocks the process that unlinked the inode from the directory structure. By moving the inactivation to the background process, the userspace applicaiton can keep working (e.g. unlinking the next inode in the directory) while the inactivation work on the previous inode is done by a different CPU. The implementation of the queue is relatively simple. We use a per-cpu lockless linked list (llist) to queue inodes for inactivation without requiring serialisation mechanisms, and a work item to allow the queue to be processed by a CPU bound worker thread. We also keep a count of the queue depth so that we can trigger work after a number of deferred inactivations have been queued. The use of a bound workqueue with a single work depth allows the workqueue to run one work item per CPU. We queue the work item on the CPU we are currently running on, and so this essentially gives us affine per-cpu worker threads for the per-cpu queues. THis maintains the effective CPU affinity that occurs within XFS at the AG level due to all objects in a directory being local to an AG. Hence inactivation work tends to run on the same CPU that last accessed all the objects that inactivation accesses and this maintains hot CPU caches for unlink workloads. A depth of 32 inodes was chosen to match the number of inodes in an inode cluster buffer. This hopefully allows sequential allocation/unlink behaviours to defering inactivation of all the inodes in a single cluster buffer at a time, further helping maintain hot CPU and buffer cache accesses while running inactivations. A hard per-cpu queue throttle of 256 inode has been set to avoid runaway queuing when inodes that take a long to time inactivate are being processed. For example, when unlinking inodes with large numbers of extents that can take a lot of processing to free. Signed-off-by: Dave Chinner <dchinner@redhat.com> [djwong: tweak comments and tracepoints, convert opflags to state bits] Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org>
2021-08-06 18:05:39 +00:00
gc = per_cpu_ptr(mp->m_inodegc, cpu);
xfs: fix xfs_inodegc_stop racing with mod_delayed_work syzbot reported this warning from the faux inodegc shrinker that tries to kick off inodegc work: ------------[ cut here ]------------ WARNING: CPU: 1 PID: 102 at kernel/workqueue.c:1445 __queue_work+0xd44/0x1120 kernel/workqueue.c:1444 RIP: 0010:__queue_work+0xd44/0x1120 kernel/workqueue.c:1444 Call Trace: __queue_delayed_work+0x1c8/0x270 kernel/workqueue.c:1672 mod_delayed_work_on+0xe1/0x220 kernel/workqueue.c:1746 xfs_inodegc_shrinker_scan fs/xfs/xfs_icache.c:2212 [inline] xfs_inodegc_shrinker_scan+0x250/0x4f0 fs/xfs/xfs_icache.c:2191 do_shrink_slab+0x428/0xaa0 mm/vmscan.c:853 shrink_slab+0x175/0x660 mm/vmscan.c:1013 shrink_one+0x502/0x810 mm/vmscan.c:5343 shrink_many mm/vmscan.c:5394 [inline] lru_gen_shrink_node mm/vmscan.c:5511 [inline] shrink_node+0x2064/0x35f0 mm/vmscan.c:6459 kswapd_shrink_node mm/vmscan.c:7262 [inline] balance_pgdat+0xa02/0x1ac0 mm/vmscan.c:7452 kswapd+0x677/0xd60 mm/vmscan.c:7712 kthread+0x2e8/0x3a0 kernel/kthread.c:376 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:308 This warning corresponds to this code in __queue_work: /* * For a draining wq, only works from the same workqueue are * allowed. The __WQ_DESTROYING helps to spot the issue that * queues a new work item to a wq after destroy_workqueue(wq). */ if (unlikely(wq->flags & (__WQ_DESTROYING | __WQ_DRAINING) && WARN_ON_ONCE(!is_chained_work(wq)))) return; For this to trip, we must have a thread draining the inodedgc workqueue and a second thread trying to queue inodegc work to that workqueue. This can happen if freezing or a ro remount race with reclaim poking our faux inodegc shrinker and another thread dropping an unlinked O_RDONLY file: Thread 0 Thread 1 Thread 2 xfs_inodegc_stop xfs_inodegc_shrinker_scan xfs_is_inodegc_enabled <yes, will continue> xfs_clear_inodegc_enabled xfs_inodegc_queue_all <list empty, do not queue inodegc worker> xfs_inodegc_queue <add to list> xfs_is_inodegc_enabled <no, returns> drain_workqueue <set WQ_DRAINING> llist_empty <no, will queue list> mod_delayed_work_on(..., 0) __queue_work <sees WQ_DRAINING, kaboom> In other words, everything between the access to inodegc_enabled state and the decision to poke the inodegc workqueue requires some kind of coordination to avoid the WQ_DRAINING state. We could perhaps introduce a lock here, but we could also try to eliminate WQ_DRAINING from the picture. We could replace the drain_workqueue call with a loop that flushes the workqueue and queues workers as long as there is at least one inode present in the per-cpu inodegc llists. We've disabled inodegc at this point, so we know that the number of queued inodes will eventually hit zero as long as xfs_inodegc_start cannot reactivate the workers. There are four callers of xfs_inodegc_start. Three of them come from the VFS with s_umount held: filesystem thawing, failed filesystem freezing, and the rw remount transition. The fourth caller is mounting rw (no remount or freezing possible). There are three callers ofs xfs_inodegc_stop. One is unmounting (no remount or thaw possible). Two of them come from the VFS with s_umount held: fs freezing and ro remount transition. Hence, it is correct to replace the drain_workqueue call with a loop that drains the inodegc llists. Fixes: 6191cf3ad59f ("xfs: flush inodegc workqueue tasks before cancel") Signed-off-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2023-05-01 23:16:14 +00:00
if (!llist_empty(&gc->list)) {
mod_delayed_work_on(cpu, mp->m_inodegc_wq, &gc->work, 0);
xfs: fix xfs_inodegc_stop racing with mod_delayed_work syzbot reported this warning from the faux inodegc shrinker that tries to kick off inodegc work: ------------[ cut here ]------------ WARNING: CPU: 1 PID: 102 at kernel/workqueue.c:1445 __queue_work+0xd44/0x1120 kernel/workqueue.c:1444 RIP: 0010:__queue_work+0xd44/0x1120 kernel/workqueue.c:1444 Call Trace: __queue_delayed_work+0x1c8/0x270 kernel/workqueue.c:1672 mod_delayed_work_on+0xe1/0x220 kernel/workqueue.c:1746 xfs_inodegc_shrinker_scan fs/xfs/xfs_icache.c:2212 [inline] xfs_inodegc_shrinker_scan+0x250/0x4f0 fs/xfs/xfs_icache.c:2191 do_shrink_slab+0x428/0xaa0 mm/vmscan.c:853 shrink_slab+0x175/0x660 mm/vmscan.c:1013 shrink_one+0x502/0x810 mm/vmscan.c:5343 shrink_many mm/vmscan.c:5394 [inline] lru_gen_shrink_node mm/vmscan.c:5511 [inline] shrink_node+0x2064/0x35f0 mm/vmscan.c:6459 kswapd_shrink_node mm/vmscan.c:7262 [inline] balance_pgdat+0xa02/0x1ac0 mm/vmscan.c:7452 kswapd+0x677/0xd60 mm/vmscan.c:7712 kthread+0x2e8/0x3a0 kernel/kthread.c:376 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:308 This warning corresponds to this code in __queue_work: /* * For a draining wq, only works from the same workqueue are * allowed. The __WQ_DESTROYING helps to spot the issue that * queues a new work item to a wq after destroy_workqueue(wq). */ if (unlikely(wq->flags & (__WQ_DESTROYING | __WQ_DRAINING) && WARN_ON_ONCE(!is_chained_work(wq)))) return; For this to trip, we must have a thread draining the inodedgc workqueue and a second thread trying to queue inodegc work to that workqueue. This can happen if freezing or a ro remount race with reclaim poking our faux inodegc shrinker and another thread dropping an unlinked O_RDONLY file: Thread 0 Thread 1 Thread 2 xfs_inodegc_stop xfs_inodegc_shrinker_scan xfs_is_inodegc_enabled <yes, will continue> xfs_clear_inodegc_enabled xfs_inodegc_queue_all <list empty, do not queue inodegc worker> xfs_inodegc_queue <add to list> xfs_is_inodegc_enabled <no, returns> drain_workqueue <set WQ_DRAINING> llist_empty <no, will queue list> mod_delayed_work_on(..., 0) __queue_work <sees WQ_DRAINING, kaboom> In other words, everything between the access to inodegc_enabled state and the decision to poke the inodegc workqueue requires some kind of coordination to avoid the WQ_DRAINING state. We could perhaps introduce a lock here, but we could also try to eliminate WQ_DRAINING from the picture. We could replace the drain_workqueue call with a loop that flushes the workqueue and queues workers as long as there is at least one inode present in the per-cpu inodegc llists. We've disabled inodegc at this point, so we know that the number of queued inodes will eventually hit zero as long as xfs_inodegc_start cannot reactivate the workers. There are four callers of xfs_inodegc_start. Three of them come from the VFS with s_umount held: filesystem thawing, failed filesystem freezing, and the rw remount transition. The fourth caller is mounting rw (no remount or freezing possible). There are three callers ofs xfs_inodegc_stop. One is unmounting (no remount or thaw possible). Two of them come from the VFS with s_umount held: fs freezing and ro remount transition. Hence, it is correct to replace the drain_workqueue call with a loop that drains the inodegc llists. Fixes: 6191cf3ad59f ("xfs: flush inodegc workqueue tasks before cancel") Signed-off-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2023-05-01 23:16:14 +00:00
ret = true;
}
xfs: per-cpu deferred inode inactivation queues Move inode inactivation to background work contexts so that it no longer runs in the context that releases the final reference to an inode. This will allow process work that ends up blocking on inactivation to continue doing work while the filesytem processes the inactivation in the background. A typical demonstration of this is unlinking an inode with lots of extents. The extents are removed during inactivation, so this blocks the process that unlinked the inode from the directory structure. By moving the inactivation to the background process, the userspace applicaiton can keep working (e.g. unlinking the next inode in the directory) while the inactivation work on the previous inode is done by a different CPU. The implementation of the queue is relatively simple. We use a per-cpu lockless linked list (llist) to queue inodes for inactivation without requiring serialisation mechanisms, and a work item to allow the queue to be processed by a CPU bound worker thread. We also keep a count of the queue depth so that we can trigger work after a number of deferred inactivations have been queued. The use of a bound workqueue with a single work depth allows the workqueue to run one work item per CPU. We queue the work item on the CPU we are currently running on, and so this essentially gives us affine per-cpu worker threads for the per-cpu queues. THis maintains the effective CPU affinity that occurs within XFS at the AG level due to all objects in a directory being local to an AG. Hence inactivation work tends to run on the same CPU that last accessed all the objects that inactivation accesses and this maintains hot CPU caches for unlink workloads. A depth of 32 inodes was chosen to match the number of inodes in an inode cluster buffer. This hopefully allows sequential allocation/unlink behaviours to defering inactivation of all the inodes in a single cluster buffer at a time, further helping maintain hot CPU and buffer cache accesses while running inactivations. A hard per-cpu queue throttle of 256 inode has been set to avoid runaway queuing when inodes that take a long to time inactivate are being processed. For example, when unlinking inodes with large numbers of extents that can take a lot of processing to free. Signed-off-by: Dave Chinner <dchinner@redhat.com> [djwong: tweak comments and tracepoints, convert opflags to state bits] Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org>
2021-08-06 18:05:39 +00:00
}
xfs: fix xfs_inodegc_stop racing with mod_delayed_work syzbot reported this warning from the faux inodegc shrinker that tries to kick off inodegc work: ------------[ cut here ]------------ WARNING: CPU: 1 PID: 102 at kernel/workqueue.c:1445 __queue_work+0xd44/0x1120 kernel/workqueue.c:1444 RIP: 0010:__queue_work+0xd44/0x1120 kernel/workqueue.c:1444 Call Trace: __queue_delayed_work+0x1c8/0x270 kernel/workqueue.c:1672 mod_delayed_work_on+0xe1/0x220 kernel/workqueue.c:1746 xfs_inodegc_shrinker_scan fs/xfs/xfs_icache.c:2212 [inline] xfs_inodegc_shrinker_scan+0x250/0x4f0 fs/xfs/xfs_icache.c:2191 do_shrink_slab+0x428/0xaa0 mm/vmscan.c:853 shrink_slab+0x175/0x660 mm/vmscan.c:1013 shrink_one+0x502/0x810 mm/vmscan.c:5343 shrink_many mm/vmscan.c:5394 [inline] lru_gen_shrink_node mm/vmscan.c:5511 [inline] shrink_node+0x2064/0x35f0 mm/vmscan.c:6459 kswapd_shrink_node mm/vmscan.c:7262 [inline] balance_pgdat+0xa02/0x1ac0 mm/vmscan.c:7452 kswapd+0x677/0xd60 mm/vmscan.c:7712 kthread+0x2e8/0x3a0 kernel/kthread.c:376 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:308 This warning corresponds to this code in __queue_work: /* * For a draining wq, only works from the same workqueue are * allowed. The __WQ_DESTROYING helps to spot the issue that * queues a new work item to a wq after destroy_workqueue(wq). */ if (unlikely(wq->flags & (__WQ_DESTROYING | __WQ_DRAINING) && WARN_ON_ONCE(!is_chained_work(wq)))) return; For this to trip, we must have a thread draining the inodedgc workqueue and a second thread trying to queue inodegc work to that workqueue. This can happen if freezing or a ro remount race with reclaim poking our faux inodegc shrinker and another thread dropping an unlinked O_RDONLY file: Thread 0 Thread 1 Thread 2 xfs_inodegc_stop xfs_inodegc_shrinker_scan xfs_is_inodegc_enabled <yes, will continue> xfs_clear_inodegc_enabled xfs_inodegc_queue_all <list empty, do not queue inodegc worker> xfs_inodegc_queue <add to list> xfs_is_inodegc_enabled <no, returns> drain_workqueue <set WQ_DRAINING> llist_empty <no, will queue list> mod_delayed_work_on(..., 0) __queue_work <sees WQ_DRAINING, kaboom> In other words, everything between the access to inodegc_enabled state and the decision to poke the inodegc workqueue requires some kind of coordination to avoid the WQ_DRAINING state. We could perhaps introduce a lock here, but we could also try to eliminate WQ_DRAINING from the picture. We could replace the drain_workqueue call with a loop that flushes the workqueue and queues workers as long as there is at least one inode present in the per-cpu inodegc llists. We've disabled inodegc at this point, so we know that the number of queued inodes will eventually hit zero as long as xfs_inodegc_start cannot reactivate the workers. There are four callers of xfs_inodegc_start. Three of them come from the VFS with s_umount held: filesystem thawing, failed filesystem freezing, and the rw remount transition. The fourth caller is mounting rw (no remount or freezing possible). There are three callers ofs xfs_inodegc_stop. One is unmounting (no remount or thaw possible). Two of them come from the VFS with s_umount held: fs freezing and ro remount transition. Hence, it is correct to replace the drain_workqueue call with a loop that drains the inodegc llists. Fixes: 6191cf3ad59f ("xfs: flush inodegc workqueue tasks before cancel") Signed-off-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2023-05-01 23:16:14 +00:00
return ret;
xfs: per-cpu deferred inode inactivation queues Move inode inactivation to background work contexts so that it no longer runs in the context that releases the final reference to an inode. This will allow process work that ends up blocking on inactivation to continue doing work while the filesytem processes the inactivation in the background. A typical demonstration of this is unlinking an inode with lots of extents. The extents are removed during inactivation, so this blocks the process that unlinked the inode from the directory structure. By moving the inactivation to the background process, the userspace applicaiton can keep working (e.g. unlinking the next inode in the directory) while the inactivation work on the previous inode is done by a different CPU. The implementation of the queue is relatively simple. We use a per-cpu lockless linked list (llist) to queue inodes for inactivation without requiring serialisation mechanisms, and a work item to allow the queue to be processed by a CPU bound worker thread. We also keep a count of the queue depth so that we can trigger work after a number of deferred inactivations have been queued. The use of a bound workqueue with a single work depth allows the workqueue to run one work item per CPU. We queue the work item on the CPU we are currently running on, and so this essentially gives us affine per-cpu worker threads for the per-cpu queues. THis maintains the effective CPU affinity that occurs within XFS at the AG level due to all objects in a directory being local to an AG. Hence inactivation work tends to run on the same CPU that last accessed all the objects that inactivation accesses and this maintains hot CPU caches for unlink workloads. A depth of 32 inodes was chosen to match the number of inodes in an inode cluster buffer. This hopefully allows sequential allocation/unlink behaviours to defering inactivation of all the inodes in a single cluster buffer at a time, further helping maintain hot CPU and buffer cache accesses while running inactivations. A hard per-cpu queue throttle of 256 inode has been set to avoid runaway queuing when inodes that take a long to time inactivate are being processed. For example, when unlinking inodes with large numbers of extents that can take a lot of processing to free. Signed-off-by: Dave Chinner <dchinner@redhat.com> [djwong: tweak comments and tracepoints, convert opflags to state bits] Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org>
2021-08-06 18:05:39 +00:00
}
xfs: collect errors from inodegc for unlinked inode recovery Unlinked list recovery requires errors removing the inode the from the unlinked list get fed back to the main recovery loop. Now that we offload the unlinking to the inodegc work, we don't get errors being fed back when we trip over a corruption that prevents the inode from being removed from the unlinked list. This means we never clear the corrupt unlinked list bucket, resulting in runtime operations eventually tripping over it and shutting down. Fix this by collecting inodegc worker errors and feed them back to the flush caller. This is largely best effort - the only context that really cares is log recovery, and it only flushes a single inode at a time so we don't need complex synchronised handling. Essentially the inodegc workers will capture the first error that occurs and the next flush will gather them and clear them. The flush itself will only report the first gathered error. In the cases where callers can return errors, propagate the collected inodegc flush error up the error handling chain. In the case of inode unlinked list recovery, there are several superfluous calls to flush queued unlinked inodes - xlog_recover_iunlink_bucket() guarantees that it has flushed the inodegc and collected errors before it returns. Hence nothing in the calling path needs to run a flush, even when an error is returned. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Dave Chinner <david@fromorbit.com>
2023-06-05 04:48:15 +00:00
/* Wait for all queued work and collect errors */
static int
xfs_inodegc_wait_all(
struct xfs_mount *mp)
{
int cpu;
int error = 0;
flush_workqueue(mp->m_inodegc_wq);
for_each_cpu(cpu, &mp->m_inodegc_cpumask) {
xfs: collect errors from inodegc for unlinked inode recovery Unlinked list recovery requires errors removing the inode the from the unlinked list get fed back to the main recovery loop. Now that we offload the unlinking to the inodegc work, we don't get errors being fed back when we trip over a corruption that prevents the inode from being removed from the unlinked list. This means we never clear the corrupt unlinked list bucket, resulting in runtime operations eventually tripping over it and shutting down. Fix this by collecting inodegc worker errors and feed them back to the flush caller. This is largely best effort - the only context that really cares is log recovery, and it only flushes a single inode at a time so we don't need complex synchronised handling. Essentially the inodegc workers will capture the first error that occurs and the next flush will gather them and clear them. The flush itself will only report the first gathered error. In the cases where callers can return errors, propagate the collected inodegc flush error up the error handling chain. In the case of inode unlinked list recovery, there are several superfluous calls to flush queued unlinked inodes - xlog_recover_iunlink_bucket() guarantees that it has flushed the inodegc and collected errors before it returns. Hence nothing in the calling path needs to run a flush, even when an error is returned. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Dave Chinner <david@fromorbit.com>
2023-06-05 04:48:15 +00:00
struct xfs_inodegc *gc;
gc = per_cpu_ptr(mp->m_inodegc, cpu);
if (gc->error && !error)
error = gc->error;
gc->error = 0;
}
return error;
}
/*
* Check the validity of the inode we just found it the cache
*/
static int
xfs_iget_cache_hit(
struct xfs_perag *pag,
struct xfs_inode *ip,
xfs_ino_t ino,
int flags,
int lock_flags) __releases(RCU)
{
struct inode *inode = VFS_I(ip);
struct xfs_mount *mp = ip->i_mount;
int error;
/*
* check for re-use of an inode within an RCU grace period due to the
* radix tree nodes not being updated yet. We monitor for this by
* setting the inode number to zero before freeing the inode structure.
* If the inode has been reallocated and set up, then the inode number
* will not match, so check for that, too.
*/
spin_lock(&ip->i_flags_lock);
if (ip->i_ino != ino)
goto out_skip;
/*
* If we are racing with another cache hit that is currently
* instantiating this inode or currently recycling it out of
* reclaimable state, wait for the initialisation to complete
* before continuing.
*
xfs: per-cpu deferred inode inactivation queues Move inode inactivation to background work contexts so that it no longer runs in the context that releases the final reference to an inode. This will allow process work that ends up blocking on inactivation to continue doing work while the filesytem processes the inactivation in the background. A typical demonstration of this is unlinking an inode with lots of extents. The extents are removed during inactivation, so this blocks the process that unlinked the inode from the directory structure. By moving the inactivation to the background process, the userspace applicaiton can keep working (e.g. unlinking the next inode in the directory) while the inactivation work on the previous inode is done by a different CPU. The implementation of the queue is relatively simple. We use a per-cpu lockless linked list (llist) to queue inodes for inactivation without requiring serialisation mechanisms, and a work item to allow the queue to be processed by a CPU bound worker thread. We also keep a count of the queue depth so that we can trigger work after a number of deferred inactivations have been queued. The use of a bound workqueue with a single work depth allows the workqueue to run one work item per CPU. We queue the work item on the CPU we are currently running on, and so this essentially gives us affine per-cpu worker threads for the per-cpu queues. THis maintains the effective CPU affinity that occurs within XFS at the AG level due to all objects in a directory being local to an AG. Hence inactivation work tends to run on the same CPU that last accessed all the objects that inactivation accesses and this maintains hot CPU caches for unlink workloads. A depth of 32 inodes was chosen to match the number of inodes in an inode cluster buffer. This hopefully allows sequential allocation/unlink behaviours to defering inactivation of all the inodes in a single cluster buffer at a time, further helping maintain hot CPU and buffer cache accesses while running inactivations. A hard per-cpu queue throttle of 256 inode has been set to avoid runaway queuing when inodes that take a long to time inactivate are being processed. For example, when unlinking inodes with large numbers of extents that can take a lot of processing to free. Signed-off-by: Dave Chinner <dchinner@redhat.com> [djwong: tweak comments and tracepoints, convert opflags to state bits] Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org>
2021-08-06 18:05:39 +00:00
* If we're racing with the inactivation worker we also want to wait.
* If we're creating a new file, it's possible that the worker
* previously marked the inode as free on disk but hasn't finished
* updating the incore state yet. The AGI buffer will be dirty and
* locked to the icreate transaction, so a synchronous push of the
* inodegc workers would result in deadlock. For a regular iget, the
* worker is running already, so we might as well wait.
*
* XXX(hch): eventually we should do something equivalent to
* wait_on_inode to wait for these flags to be cleared
* instead of polling for it.
*/
xfs: per-cpu deferred inode inactivation queues Move inode inactivation to background work contexts so that it no longer runs in the context that releases the final reference to an inode. This will allow process work that ends up blocking on inactivation to continue doing work while the filesytem processes the inactivation in the background. A typical demonstration of this is unlinking an inode with lots of extents. The extents are removed during inactivation, so this blocks the process that unlinked the inode from the directory structure. By moving the inactivation to the background process, the userspace applicaiton can keep working (e.g. unlinking the next inode in the directory) while the inactivation work on the previous inode is done by a different CPU. The implementation of the queue is relatively simple. We use a per-cpu lockless linked list (llist) to queue inodes for inactivation without requiring serialisation mechanisms, and a work item to allow the queue to be processed by a CPU bound worker thread. We also keep a count of the queue depth so that we can trigger work after a number of deferred inactivations have been queued. The use of a bound workqueue with a single work depth allows the workqueue to run one work item per CPU. We queue the work item on the CPU we are currently running on, and so this essentially gives us affine per-cpu worker threads for the per-cpu queues. THis maintains the effective CPU affinity that occurs within XFS at the AG level due to all objects in a directory being local to an AG. Hence inactivation work tends to run on the same CPU that last accessed all the objects that inactivation accesses and this maintains hot CPU caches for unlink workloads. A depth of 32 inodes was chosen to match the number of inodes in an inode cluster buffer. This hopefully allows sequential allocation/unlink behaviours to defering inactivation of all the inodes in a single cluster buffer at a time, further helping maintain hot CPU and buffer cache accesses while running inactivations. A hard per-cpu queue throttle of 256 inode has been set to avoid runaway queuing when inodes that take a long to time inactivate are being processed. For example, when unlinking inodes with large numbers of extents that can take a lot of processing to free. Signed-off-by: Dave Chinner <dchinner@redhat.com> [djwong: tweak comments and tracepoints, convert opflags to state bits] Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org>
2021-08-06 18:05:39 +00:00
if (ip->i_flags & (XFS_INEW | XFS_IRECLAIM | XFS_INACTIVATING))
goto out_skip;
xfs: per-cpu deferred inode inactivation queues Move inode inactivation to background work contexts so that it no longer runs in the context that releases the final reference to an inode. This will allow process work that ends up blocking on inactivation to continue doing work while the filesytem processes the inactivation in the background. A typical demonstration of this is unlinking an inode with lots of extents. The extents are removed during inactivation, so this blocks the process that unlinked the inode from the directory structure. By moving the inactivation to the background process, the userspace applicaiton can keep working (e.g. unlinking the next inode in the directory) while the inactivation work on the previous inode is done by a different CPU. The implementation of the queue is relatively simple. We use a per-cpu lockless linked list (llist) to queue inodes for inactivation without requiring serialisation mechanisms, and a work item to allow the queue to be processed by a CPU bound worker thread. We also keep a count of the queue depth so that we can trigger work after a number of deferred inactivations have been queued. The use of a bound workqueue with a single work depth allows the workqueue to run one work item per CPU. We queue the work item on the CPU we are currently running on, and so this essentially gives us affine per-cpu worker threads for the per-cpu queues. THis maintains the effective CPU affinity that occurs within XFS at the AG level due to all objects in a directory being local to an AG. Hence inactivation work tends to run on the same CPU that last accessed all the objects that inactivation accesses and this maintains hot CPU caches for unlink workloads. A depth of 32 inodes was chosen to match the number of inodes in an inode cluster buffer. This hopefully allows sequential allocation/unlink behaviours to defering inactivation of all the inodes in a single cluster buffer at a time, further helping maintain hot CPU and buffer cache accesses while running inactivations. A hard per-cpu queue throttle of 256 inode has been set to avoid runaway queuing when inodes that take a long to time inactivate are being processed. For example, when unlinking inodes with large numbers of extents that can take a lot of processing to free. Signed-off-by: Dave Chinner <dchinner@redhat.com> [djwong: tweak comments and tracepoints, convert opflags to state bits] Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org>
2021-08-06 18:05:39 +00:00
if (ip->i_flags & XFS_NEED_INACTIVE) {
/* Unlinked inodes cannot be re-grabbed. */
if (VFS_I(ip)->i_nlink == 0) {
error = -ENOENT;
goto out_error;
}
goto out_inodegc_flush;
}
/*
xfs: validate cached inodes are free when allocated A recent fuzzed filesystem image cached random dcache corruption when the reproducer was run. This often showed up as panics in lookup_slow() on a null inode->i_ops pointer when doing pathwalks. BUG: unable to handle kernel NULL pointer dereference at 0000000000000000 .... Call Trace: lookup_slow+0x44/0x60 walk_component+0x3dd/0x9f0 link_path_walk+0x4a7/0x830 path_lookupat+0xc1/0x470 filename_lookup+0x129/0x270 user_path_at_empty+0x36/0x40 path_listxattr+0x98/0x110 SyS_listxattr+0x13/0x20 do_syscall_64+0xf5/0x280 entry_SYSCALL_64_after_hwframe+0x42/0xb7 but had many different failure modes including deadlocks trying to lock the inode that was just allocated or KASAN reports of use-after-free violations. The cause of the problem was a corrupt INOBT on a v4 fs where the root inode was marked as free in the inobt record. Hence when we allocated an inode, it chose the root inode to allocate, found it in the cache and re-initialised it. We recently fixed a similar inode allocation issue caused by inobt record corruption problem in xfs_iget_cache_miss() in commit ee457001ed6c ("xfs: catch inode allocation state mismatch corruption"). This change adds similar checks to the cache-hit path to catch it, and turns the reproducer into a corruption shutdown situation. Reported-by: Wen Xu <wen.xu@gatech.edu> Signed-Off-By: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> [darrick: fix typos in comment] Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2018-04-18 00:17:34 +00:00
* Check the inode free state is valid. This also detects lookup
* racing with unlinks.
*/
xfs: validate cached inodes are free when allocated A recent fuzzed filesystem image cached random dcache corruption when the reproducer was run. This often showed up as panics in lookup_slow() on a null inode->i_ops pointer when doing pathwalks. BUG: unable to handle kernel NULL pointer dereference at 0000000000000000 .... Call Trace: lookup_slow+0x44/0x60 walk_component+0x3dd/0x9f0 link_path_walk+0x4a7/0x830 path_lookupat+0xc1/0x470 filename_lookup+0x129/0x270 user_path_at_empty+0x36/0x40 path_listxattr+0x98/0x110 SyS_listxattr+0x13/0x20 do_syscall_64+0xf5/0x280 entry_SYSCALL_64_after_hwframe+0x42/0xb7 but had many different failure modes including deadlocks trying to lock the inode that was just allocated or KASAN reports of use-after-free violations. The cause of the problem was a corrupt INOBT on a v4 fs where the root inode was marked as free in the inobt record. Hence when we allocated an inode, it chose the root inode to allocate, found it in the cache and re-initialised it. We recently fixed a similar inode allocation issue caused by inobt record corruption problem in xfs_iget_cache_miss() in commit ee457001ed6c ("xfs: catch inode allocation state mismatch corruption"). This change adds similar checks to the cache-hit path to catch it, and turns the reproducer into a corruption shutdown situation. Reported-by: Wen Xu <wen.xu@gatech.edu> Signed-Off-By: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> [darrick: fix typos in comment] Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2018-04-18 00:17:34 +00:00
error = xfs_iget_check_free_state(ip, flags);
if (error)
goto out_error;
/* Skip inodes that have no vfs state. */
if ((flags & XFS_IGET_INCORE) &&
(ip->i_flags & XFS_IRECLAIMABLE))
goto out_skip;
/* The inode fits the selection criteria; process it. */
if (ip->i_flags & XFS_IRECLAIMABLE) {
/* Drops i_flags_lock and RCU read lock. */
error = xfs_iget_recycle(pag, ip);
if (error == -EAGAIN)
goto out_skip;
if (error)
return error;
} else {
/* If the VFS inode is being torn down, pause and try again. */
if (!igrab(inode))
goto out_skip;
/* We've got a live one. */
spin_unlock(&ip->i_flags_lock);
rcu_read_unlock();
trace_xfs_iget_hit(ip);
}
if (lock_flags != 0)
xfs_ilock(ip, lock_flags);
if (!(flags & XFS_IGET_INCORE))
xfs_iflags_clear(ip, XFS_ISTALE);
XFS_STATS_INC(mp, xs_ig_found);
return 0;
out_skip:
trace_xfs_iget_skip(ip);
XFS_STATS_INC(mp, xs_ig_frecycle);
error = -EAGAIN;
out_error:
spin_unlock(&ip->i_flags_lock);
rcu_read_unlock();
return error;
xfs: per-cpu deferred inode inactivation queues Move inode inactivation to background work contexts so that it no longer runs in the context that releases the final reference to an inode. This will allow process work that ends up blocking on inactivation to continue doing work while the filesytem processes the inactivation in the background. A typical demonstration of this is unlinking an inode with lots of extents. The extents are removed during inactivation, so this blocks the process that unlinked the inode from the directory structure. By moving the inactivation to the background process, the userspace applicaiton can keep working (e.g. unlinking the next inode in the directory) while the inactivation work on the previous inode is done by a different CPU. The implementation of the queue is relatively simple. We use a per-cpu lockless linked list (llist) to queue inodes for inactivation without requiring serialisation mechanisms, and a work item to allow the queue to be processed by a CPU bound worker thread. We also keep a count of the queue depth so that we can trigger work after a number of deferred inactivations have been queued. The use of a bound workqueue with a single work depth allows the workqueue to run one work item per CPU. We queue the work item on the CPU we are currently running on, and so this essentially gives us affine per-cpu worker threads for the per-cpu queues. THis maintains the effective CPU affinity that occurs within XFS at the AG level due to all objects in a directory being local to an AG. Hence inactivation work tends to run on the same CPU that last accessed all the objects that inactivation accesses and this maintains hot CPU caches for unlink workloads. A depth of 32 inodes was chosen to match the number of inodes in an inode cluster buffer. This hopefully allows sequential allocation/unlink behaviours to defering inactivation of all the inodes in a single cluster buffer at a time, further helping maintain hot CPU and buffer cache accesses while running inactivations. A hard per-cpu queue throttle of 256 inode has been set to avoid runaway queuing when inodes that take a long to time inactivate are being processed. For example, when unlinking inodes with large numbers of extents that can take a lot of processing to free. Signed-off-by: Dave Chinner <dchinner@redhat.com> [djwong: tweak comments and tracepoints, convert opflags to state bits] Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org>
2021-08-06 18:05:39 +00:00
out_inodegc_flush:
spin_unlock(&ip->i_flags_lock);
rcu_read_unlock();
/*
* Do not wait for the workers, because the caller could hold an AGI
* buffer lock. We're just going to sleep in a loop anyway.
*/
if (xfs_is_inodegc_enabled(mp))
xfs_inodegc_queue_all(mp);
return -EAGAIN;
}
static int
xfs_iget_cache_miss(
struct xfs_mount *mp,
struct xfs_perag *pag,
xfs_trans_t *tp,
xfs_ino_t ino,
struct xfs_inode **ipp,
int flags,
int lock_flags)
{
struct xfs_inode *ip;
int error;
xfs_agino_t agino = XFS_INO_TO_AGINO(mp, ino);
int iflags;
ip = xfs_inode_alloc(mp, ino);
if (!ip)
return -ENOMEM;
error = xfs_imap(pag, tp, ip->i_ino, &ip->i_imap, flags);
if (error)
goto out_destroy;
/*
* For version 5 superblocks, if we are initialising a new inode and we
* are not utilising the XFS_FEAT_IKEEP inode cluster mode, we can
* simply build the new inode core with a random generation number.
*
* For version 4 (and older) superblocks, log recovery is dependent on
* the i_flushiter field being initialised from the current on-disk
* value and hence we must also read the inode off disk even when
* initializing new inodes.
*/
if (xfs_has_v3inodes(mp) &&
(flags & XFS_IGET_CREATE) && !xfs_has_ikeep(mp)) {
VFS_I(ip)->i_generation = get_random_u32();
} else {
struct xfs_buf *bp;
error = xfs_imap_to_bp(mp, tp, &ip->i_imap, &bp);
if (error)
goto out_destroy;
error = xfs_inode_from_disk(ip,
xfs_buf_offset(bp, ip->i_imap.im_boffset));
if (!error)
xfs_buf_set_ref(bp, XFS_INO_REF);
xfs_trans_brelse(tp, bp);
if (error)
goto out_destroy;
}
trace_xfs_iget_miss(ip);
xfs: catch inode allocation state mismatch corruption We recently came across a V4 filesystem causing memory corruption due to a newly allocated inode being setup twice and being added to the superblock inode list twice. From code inspection, the only way this could happen is if a newly allocated inode was not marked as free on disk (i.e. di_mode wasn't zero). Running the metadump on an upstream debug kernel fails during inode allocation like so: XFS: Assertion failed: ip->i_d.di_nblocks == 0, file: fs/xfs/xfs_inod= e.c, line: 838 ------------[ cut here ]------------ kernel BUG at fs/xfs/xfs_message.c:114! invalid opcode: 0000 [#1] PREEMPT SMP CPU: 11 PID: 3496 Comm: mkdir Not tainted 4.16.0-rc5-dgc #442 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1 04/0= 1/2014 RIP: 0010:assfail+0x28/0x30 RSP: 0018:ffffc9000236fc80 EFLAGS: 00010202 RAX: 00000000ffffffea RBX: 0000000000004000 RCX: 0000000000000000 RDX: 00000000ffffffc0 RSI: 000000000000000a RDI: ffffffff8227211b RBP: ffffc9000236fce8 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000bec R11: f000000000000000 R12: ffffc9000236fd30 R13: ffff8805c76bab80 R14: ffff8805c77ac800 R15: ffff88083fb12e10 FS: 00007fac8cbff040(0000) GS:ffff88083fd00000(0000) knlGS:0000000000000= 000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fffa6783ff8 CR3: 00000005c6e2b003 CR4: 00000000000606e0 Call Trace: xfs_ialloc+0x383/0x570 xfs_dir_ialloc+0x6a/0x2a0 xfs_create+0x412/0x670 xfs_generic_create+0x1f7/0x2c0 ? capable_wrt_inode_uidgid+0x3f/0x50 vfs_mkdir+0xfb/0x1b0 SyS_mkdir+0xcf/0xf0 do_syscall_64+0x73/0x1a0 entry_SYSCALL_64_after_hwframe+0x42/0xb7 Extracting the inode number we crashed on from an event trace and looking at it with xfs_db: xfs_db> inode 184452204 xfs_db> p core.magic = 0x494e core.mode = 0100644 core.version = 2 core.format = 2 (extents) core.nlinkv2 = 1 core.onlink = 0 ..... Confirms that it is not a free inode on disk. xfs_repair also trips over this inode: ..... zero length extent (off = 0, fsbno = 0) in ino 184452204 correcting nextents for inode 184452204 bad attribute fork in inode 184452204, would clear attr fork bad nblocks 1 for inode 184452204, would reset to 0 bad anextents 1 for inode 184452204, would reset to 0 imap claims in-use inode 184452204 is free, would correct imap would have cleared inode 184452204 ..... disconnected inode 184452204, would move to lost+found And so we have a situation where the directory structure and the inobt thinks the inode is free, but the inode on disk thinks it is still in use. Where this corruption came from is not possible to diagnose, but we can detect it and prevent the kernel from oopsing on lookup. The reproducer now results in: $ sudo mkdir /mnt/scratch/{0,1,2,3,4,5}{0,1,2,3,4,5} mkdir: cannot create directory =E2=80=98/mnt/scratch/00=E2=80=99: File ex= ists mkdir: cannot create directory =E2=80=98/mnt/scratch/01=E2=80=99: File ex= ists mkdir: cannot create directory =E2=80=98/mnt/scratch/03=E2=80=99: Structu= re needs cleaning mkdir: cannot create directory =E2=80=98/mnt/scratch/04=E2=80=99: Input/o= utput error mkdir: cannot create directory =E2=80=98/mnt/scratch/05=E2=80=99: Input/o= utput error .... And this corruption shutdown: [ 54.843517] XFS (loop0): Corruption detected! Free inode 0xafe846c not= marked free on disk [ 54.845885] XFS (loop0): Internal error xfs_trans_cancel at line 1023 = of file fs/xfs/xfs_trans.c. Caller xfs_create+0x425/0x670 [ 54.848994] CPU: 10 PID: 3541 Comm: mkdir Not tainted 4.16.0-rc5-dgc #= 443 [ 54.850753] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIO= S 1.10.2-1 04/01/2014 [ 54.852859] Call Trace: [ 54.853531] dump_stack+0x85/0xc5 [ 54.854385] xfs_trans_cancel+0x197/0x1c0 [ 54.855421] xfs_create+0x425/0x670 [ 54.856314] xfs_generic_create+0x1f7/0x2c0 [ 54.857390] ? capable_wrt_inode_uidgid+0x3f/0x50 [ 54.858586] vfs_mkdir+0xfb/0x1b0 [ 54.859458] SyS_mkdir+0xcf/0xf0 [ 54.860254] do_syscall_64+0x73/0x1a0 [ 54.861193] entry_SYSCALL_64_after_hwframe+0x42/0xb7 [ 54.862492] RIP: 0033:0x7fb73bddf547 [ 54.863358] RSP: 002b:00007ffdaa553338 EFLAGS: 00000246 ORIG_RAX: 0000= 000000000053 [ 54.865133] RAX: ffffffffffffffda RBX: 00007ffdaa55449a RCX: 00007fb73= bddf547 [ 54.866766] RDX: 0000000000000001 RSI: 00000000000001ff RDI: 00007ffda= a55449a [ 54.868432] RBP: 00007ffdaa55449a R08: 00000000000001ff R09: 00005623a= 8670dd0 [ 54.870110] R10: 00007fb73be72d5b R11: 0000000000000246 R12: 000000000= 00001ff [ 54.871752] R13: 00007ffdaa5534b0 R14: 0000000000000000 R15: 00007ffda= a553500 [ 54.873429] XFS (loop0): xfs_do_force_shutdown(0x8) called from line 1= 024 of file fs/xfs/xfs_trans.c. Return address = ffffffff814cd050 [ 54.882790] XFS (loop0): Corruption of in-memory data detected. Shutt= ing down filesystem [ 54.884597] XFS (loop0): Please umount the filesystem and rectify the = problem(s) Note that this crash is only possible on v4 filesystemsi or v5 filesystems mounted with the ikeep mount option. For all other V5 filesystems, this problem cannot occur because we don't read inodes we are allocating from disk - we simply overwrite them with the new inode information. Signed-Off-By: Dave Chinner <dchinner@redhat.com> Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com> Tested-by: Carlos Maiolino <cmaiolino@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2018-03-23 17:22:53 +00:00
/*
xfs: validate cached inodes are free when allocated A recent fuzzed filesystem image cached random dcache corruption when the reproducer was run. This often showed up as panics in lookup_slow() on a null inode->i_ops pointer when doing pathwalks. BUG: unable to handle kernel NULL pointer dereference at 0000000000000000 .... Call Trace: lookup_slow+0x44/0x60 walk_component+0x3dd/0x9f0 link_path_walk+0x4a7/0x830 path_lookupat+0xc1/0x470 filename_lookup+0x129/0x270 user_path_at_empty+0x36/0x40 path_listxattr+0x98/0x110 SyS_listxattr+0x13/0x20 do_syscall_64+0xf5/0x280 entry_SYSCALL_64_after_hwframe+0x42/0xb7 but had many different failure modes including deadlocks trying to lock the inode that was just allocated or KASAN reports of use-after-free violations. The cause of the problem was a corrupt INOBT on a v4 fs where the root inode was marked as free in the inobt record. Hence when we allocated an inode, it chose the root inode to allocate, found it in the cache and re-initialised it. We recently fixed a similar inode allocation issue caused by inobt record corruption problem in xfs_iget_cache_miss() in commit ee457001ed6c ("xfs: catch inode allocation state mismatch corruption"). This change adds similar checks to the cache-hit path to catch it, and turns the reproducer into a corruption shutdown situation. Reported-by: Wen Xu <wen.xu@gatech.edu> Signed-Off-By: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> [darrick: fix typos in comment] Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2018-04-18 00:17:34 +00:00
* Check the inode free state is valid. This also detects lookup
* racing with unlinks.
xfs: catch inode allocation state mismatch corruption We recently came across a V4 filesystem causing memory corruption due to a newly allocated inode being setup twice and being added to the superblock inode list twice. From code inspection, the only way this could happen is if a newly allocated inode was not marked as free on disk (i.e. di_mode wasn't zero). Running the metadump on an upstream debug kernel fails during inode allocation like so: XFS: Assertion failed: ip->i_d.di_nblocks == 0, file: fs/xfs/xfs_inod= e.c, line: 838 ------------[ cut here ]------------ kernel BUG at fs/xfs/xfs_message.c:114! invalid opcode: 0000 [#1] PREEMPT SMP CPU: 11 PID: 3496 Comm: mkdir Not tainted 4.16.0-rc5-dgc #442 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1 04/0= 1/2014 RIP: 0010:assfail+0x28/0x30 RSP: 0018:ffffc9000236fc80 EFLAGS: 00010202 RAX: 00000000ffffffea RBX: 0000000000004000 RCX: 0000000000000000 RDX: 00000000ffffffc0 RSI: 000000000000000a RDI: ffffffff8227211b RBP: ffffc9000236fce8 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000bec R11: f000000000000000 R12: ffffc9000236fd30 R13: ffff8805c76bab80 R14: ffff8805c77ac800 R15: ffff88083fb12e10 FS: 00007fac8cbff040(0000) GS:ffff88083fd00000(0000) knlGS:0000000000000= 000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fffa6783ff8 CR3: 00000005c6e2b003 CR4: 00000000000606e0 Call Trace: xfs_ialloc+0x383/0x570 xfs_dir_ialloc+0x6a/0x2a0 xfs_create+0x412/0x670 xfs_generic_create+0x1f7/0x2c0 ? capable_wrt_inode_uidgid+0x3f/0x50 vfs_mkdir+0xfb/0x1b0 SyS_mkdir+0xcf/0xf0 do_syscall_64+0x73/0x1a0 entry_SYSCALL_64_after_hwframe+0x42/0xb7 Extracting the inode number we crashed on from an event trace and looking at it with xfs_db: xfs_db> inode 184452204 xfs_db> p core.magic = 0x494e core.mode = 0100644 core.version = 2 core.format = 2 (extents) core.nlinkv2 = 1 core.onlink = 0 ..... Confirms that it is not a free inode on disk. xfs_repair also trips over this inode: ..... zero length extent (off = 0, fsbno = 0) in ino 184452204 correcting nextents for inode 184452204 bad attribute fork in inode 184452204, would clear attr fork bad nblocks 1 for inode 184452204, would reset to 0 bad anextents 1 for inode 184452204, would reset to 0 imap claims in-use inode 184452204 is free, would correct imap would have cleared inode 184452204 ..... disconnected inode 184452204, would move to lost+found And so we have a situation where the directory structure and the inobt thinks the inode is free, but the inode on disk thinks it is still in use. Where this corruption came from is not possible to diagnose, but we can detect it and prevent the kernel from oopsing on lookup. The reproducer now results in: $ sudo mkdir /mnt/scratch/{0,1,2,3,4,5}{0,1,2,3,4,5} mkdir: cannot create directory =E2=80=98/mnt/scratch/00=E2=80=99: File ex= ists mkdir: cannot create directory =E2=80=98/mnt/scratch/01=E2=80=99: File ex= ists mkdir: cannot create directory =E2=80=98/mnt/scratch/03=E2=80=99: Structu= re needs cleaning mkdir: cannot create directory =E2=80=98/mnt/scratch/04=E2=80=99: Input/o= utput error mkdir: cannot create directory =E2=80=98/mnt/scratch/05=E2=80=99: Input/o= utput error .... And this corruption shutdown: [ 54.843517] XFS (loop0): Corruption detected! Free inode 0xafe846c not= marked free on disk [ 54.845885] XFS (loop0): Internal error xfs_trans_cancel at line 1023 = of file fs/xfs/xfs_trans.c. Caller xfs_create+0x425/0x670 [ 54.848994] CPU: 10 PID: 3541 Comm: mkdir Not tainted 4.16.0-rc5-dgc #= 443 [ 54.850753] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIO= S 1.10.2-1 04/01/2014 [ 54.852859] Call Trace: [ 54.853531] dump_stack+0x85/0xc5 [ 54.854385] xfs_trans_cancel+0x197/0x1c0 [ 54.855421] xfs_create+0x425/0x670 [ 54.856314] xfs_generic_create+0x1f7/0x2c0 [ 54.857390] ? capable_wrt_inode_uidgid+0x3f/0x50 [ 54.858586] vfs_mkdir+0xfb/0x1b0 [ 54.859458] SyS_mkdir+0xcf/0xf0 [ 54.860254] do_syscall_64+0x73/0x1a0 [ 54.861193] entry_SYSCALL_64_after_hwframe+0x42/0xb7 [ 54.862492] RIP: 0033:0x7fb73bddf547 [ 54.863358] RSP: 002b:00007ffdaa553338 EFLAGS: 00000246 ORIG_RAX: 0000= 000000000053 [ 54.865133] RAX: ffffffffffffffda RBX: 00007ffdaa55449a RCX: 00007fb73= bddf547 [ 54.866766] RDX: 0000000000000001 RSI: 00000000000001ff RDI: 00007ffda= a55449a [ 54.868432] RBP: 00007ffdaa55449a R08: 00000000000001ff R09: 00005623a= 8670dd0 [ 54.870110] R10: 00007fb73be72d5b R11: 0000000000000246 R12: 000000000= 00001ff [ 54.871752] R13: 00007ffdaa5534b0 R14: 0000000000000000 R15: 00007ffda= a553500 [ 54.873429] XFS (loop0): xfs_do_force_shutdown(0x8) called from line 1= 024 of file fs/xfs/xfs_trans.c. Return address = ffffffff814cd050 [ 54.882790] XFS (loop0): Corruption of in-memory data detected. Shutt= ing down filesystem [ 54.884597] XFS (loop0): Please umount the filesystem and rectify the = problem(s) Note that this crash is only possible on v4 filesystemsi or v5 filesystems mounted with the ikeep mount option. For all other V5 filesystems, this problem cannot occur because we don't read inodes we are allocating from disk - we simply overwrite them with the new inode information. Signed-Off-By: Dave Chinner <dchinner@redhat.com> Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com> Tested-by: Carlos Maiolino <cmaiolino@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2018-03-23 17:22:53 +00:00
*/
xfs: validate cached inodes are free when allocated A recent fuzzed filesystem image cached random dcache corruption when the reproducer was run. This often showed up as panics in lookup_slow() on a null inode->i_ops pointer when doing pathwalks. BUG: unable to handle kernel NULL pointer dereference at 0000000000000000 .... Call Trace: lookup_slow+0x44/0x60 walk_component+0x3dd/0x9f0 link_path_walk+0x4a7/0x830 path_lookupat+0xc1/0x470 filename_lookup+0x129/0x270 user_path_at_empty+0x36/0x40 path_listxattr+0x98/0x110 SyS_listxattr+0x13/0x20 do_syscall_64+0xf5/0x280 entry_SYSCALL_64_after_hwframe+0x42/0xb7 but had many different failure modes including deadlocks trying to lock the inode that was just allocated or KASAN reports of use-after-free violations. The cause of the problem was a corrupt INOBT on a v4 fs where the root inode was marked as free in the inobt record. Hence when we allocated an inode, it chose the root inode to allocate, found it in the cache and re-initialised it. We recently fixed a similar inode allocation issue caused by inobt record corruption problem in xfs_iget_cache_miss() in commit ee457001ed6c ("xfs: catch inode allocation state mismatch corruption"). This change adds similar checks to the cache-hit path to catch it, and turns the reproducer into a corruption shutdown situation. Reported-by: Wen Xu <wen.xu@gatech.edu> Signed-Off-By: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> [darrick: fix typos in comment] Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2018-04-18 00:17:34 +00:00
error = xfs_iget_check_free_state(ip, flags);
if (error)
goto out_destroy;
/*
* Preload the radix tree so we can insert safely under the
* write spinlock. Note that we cannot sleep inside the preload
xfs: use __GFP_NOLOCKDEP instead of GFP_NOFS In the past we've had problems with lockdep false positives stemming from inode locking occurring in memory reclaim contexts (e.g. from superblock shrinkers). Lockdep doesn't know that inodes access from above memory reclaim cannot be accessed from below memory reclaim (and vice versa) but there has never been a good solution to solving this problem with lockdep annotations. This situation isn't unique to inode locks - buffers are also locked above and below memory reclaim, and we have to maintain lock ordering for them - and against inodes - appropriately. IOWs, the same code paths and locks are taken both above and below memory reclaim and so we always need to make sure the lock orders are consistent. We are spared the lockdep problems this might cause by the fact that semaphores and bit locks aren't covered by lockdep. In general, this sort of lockdep false positive detection is cause by code that runs GFP_KERNEL memory allocation with an actively referenced inode locked. When it is run from a transaction, memory allocation is automatically GFP_NOFS, so we don't have reclaim recursion issues. So in the places where we do memory allocation with inodes locked outside of a transaction, we have explicitly set them to use GFP_NOFS allocations to prevent lockdep false positives from being reported if the allocation dips into direct memory reclaim. More recently, __GFP_NOLOCKDEP was added to the memory allocation flags to tell lockdep not to track that particular allocation for the purposes of reclaim recursion detection. This is a much better way of preventing false positives - it allows us to use GFP_KERNEL context outside of transactions, and allows direct memory reclaim to proceed normally without throwing out false positive deadlock warnings. The obvious places that lock inodes and do memory allocation are the lookup paths and inode extent list initialisation. These occur in non-transactional GFP_KERNEL contexts, and so can run direct reclaim and lock inodes. This patch makes a first path through all the explicit GFP_NOFS allocations in XFS and converts the obvious ones to GFP_KERNEL | __GFP_NOLOCKDEP as a first step towards removing explicit GFP_NOFS allocations from the XFS code. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: "Darrick J. Wong" <djwong@kernel.org> Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
2024-01-15 22:59:45 +00:00
* region.
*/
xfs: use __GFP_NOLOCKDEP instead of GFP_NOFS In the past we've had problems with lockdep false positives stemming from inode locking occurring in memory reclaim contexts (e.g. from superblock shrinkers). Lockdep doesn't know that inodes access from above memory reclaim cannot be accessed from below memory reclaim (and vice versa) but there has never been a good solution to solving this problem with lockdep annotations. This situation isn't unique to inode locks - buffers are also locked above and below memory reclaim, and we have to maintain lock ordering for them - and against inodes - appropriately. IOWs, the same code paths and locks are taken both above and below memory reclaim and so we always need to make sure the lock orders are consistent. We are spared the lockdep problems this might cause by the fact that semaphores and bit locks aren't covered by lockdep. In general, this sort of lockdep false positive detection is cause by code that runs GFP_KERNEL memory allocation with an actively referenced inode locked. When it is run from a transaction, memory allocation is automatically GFP_NOFS, so we don't have reclaim recursion issues. So in the places where we do memory allocation with inodes locked outside of a transaction, we have explicitly set them to use GFP_NOFS allocations to prevent lockdep false positives from being reported if the allocation dips into direct memory reclaim. More recently, __GFP_NOLOCKDEP was added to the memory allocation flags to tell lockdep not to track that particular allocation for the purposes of reclaim recursion detection. This is a much better way of preventing false positives - it allows us to use GFP_KERNEL context outside of transactions, and allows direct memory reclaim to proceed normally without throwing out false positive deadlock warnings. The obvious places that lock inodes and do memory allocation are the lookup paths and inode extent list initialisation. These occur in non-transactional GFP_KERNEL contexts, and so can run direct reclaim and lock inodes. This patch makes a first path through all the explicit GFP_NOFS allocations in XFS and converts the obvious ones to GFP_KERNEL | __GFP_NOLOCKDEP as a first step towards removing explicit GFP_NOFS allocations from the XFS code. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: "Darrick J. Wong" <djwong@kernel.org> Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
2024-01-15 22:59:45 +00:00
if (radix_tree_preload(GFP_KERNEL | __GFP_NOLOCKDEP)) {
error = -EAGAIN;
goto out_destroy;
}
/*
* Because the inode hasn't been added to the radix-tree yet it can't
* be found by another thread, so we can do the non-sleeping lock here.
*/
if (lock_flags) {
if (!xfs_ilock_nowait(ip, lock_flags))
BUG();
}
/*
* These values must be set before inserting the inode into the radix
* tree as the moment it is inserted a concurrent lookup (allowed by the
* RCU locking mechanism) can find it and that lookup must see that this
* is an inode currently under construction (i.e. that XFS_INEW is set).
* The ip->i_flags_lock that protects the XFS_INEW flag forms the
* memory barrier that ensures this detection works correctly at lookup
* time.
*/
iflags = XFS_INEW;
if (flags & XFS_IGET_DONTCACHE)
d_mark_dontcache(VFS_I(ip));
ip->i_udquot = NULL;
ip->i_gdquot = NULL;
ip->i_pdquot = NULL;
xfs_iflags_set(ip, iflags);
/* insert the new inode */
spin_lock(&pag->pag_ici_lock);
error = radix_tree_insert(&pag->pag_ici_root, agino, ip);
if (unlikely(error)) {
WARN_ON(error != -EEXIST);
XFS_STATS_INC(mp, xs_ig_dup);
error = -EAGAIN;
goto out_preload_end;
}
spin_unlock(&pag->pag_ici_lock);
radix_tree_preload_end();
*ipp = ip;
return 0;
out_preload_end:
spin_unlock(&pag->pag_ici_lock);
radix_tree_preload_end();
if (lock_flags)
xfs_iunlock(ip, lock_flags);
out_destroy:
__destroy_inode(VFS_I(ip));
xfs_inode_free(ip);
return error;
}
/*
* Look up an inode by number in the given file system. The inode is looked up
* in the cache held in each AG. If the inode is found in the cache, initialise
* the vfs inode if necessary.
*
* If it is not in core, read it in from the file system's device, add it to the
* cache and initialise the vfs inode.
*
* The inode is locked according to the value of the lock_flags parameter.
* Inode lookup is only done during metadata operations and not as part of the
* data IO path. Hence we only allow locking of the XFS_ILOCK during lookup.
*/
int
xfs_iget(
struct xfs_mount *mp,
struct xfs_trans *tp,
xfs_ino_t ino,
uint flags,
uint lock_flags,
struct xfs_inode **ipp)
{
struct xfs_inode *ip;
struct xfs_perag *pag;
xfs_agino_t agino;
int error;
ASSERT((lock_flags & (XFS_IOLOCK_EXCL | XFS_IOLOCK_SHARED)) == 0);
/* reject inode numbers outside existing AGs */
if (!ino || XFS_INO_TO_AGNO(mp, ino) >= mp->m_sb.sb_agcount)
return -EINVAL;
XFS_STATS_INC(mp, xs_ig_attempts);
/* get the perag structure and ensure that it's inode capable */
pag = xfs_perag_get(mp, XFS_INO_TO_AGNO(mp, ino));
agino = XFS_INO_TO_AGINO(mp, ino);
again:
error = 0;
rcu_read_lock();
ip = radix_tree_lookup(&pag->pag_ici_root, agino);
if (ip) {
error = xfs_iget_cache_hit(pag, ip, ino, flags, lock_flags);
if (error)
goto out_error_or_again;
} else {
rcu_read_unlock();
if (flags & XFS_IGET_INCORE) {
error = -ENODATA;
goto out_error_or_again;
}
XFS_STATS_INC(mp, xs_ig_missed);
error = xfs_iget_cache_miss(mp, pag, tp, ino, &ip,
flags, lock_flags);
if (error)
goto out_error_or_again;
}
xfs_perag_put(pag);
*ipp = ip;
/*
xfs: inodes are new until the dentry cache is set up Al Viro noticed a generic set of issues to do with filehandle lookup racing with dentry cache setup. They involve a filehandle lookup occurring while an inode is being created and the filehandle lookup racing with the dentry creation for the real file. This can lead to multiple dentries for the one path being instantiated. There are a host of other issues around this same set of paths. The underlying cause is that file handle lookup only waits on inode cache instantiation rather than full dentry cache instantiation. XFS is mostly immune to the problems discovered due to it's own internal inode cache, but there are a couple of corner cases where races can happen. We currently clear the XFS_INEW flag when the inode is fully set up after insertion into the cache. Newly allocated inodes are inserted locked and so aren't usable until the allocation transaction commits. This, however, occurs before the dentry and security information is fully initialised and hence the inode is unlocked and available for lookups to find too early. To solve the problem, only clear the XFS_INEW flag for newly created inodes once the dentry is fully instantiated. This means lookups will retry until the XFS_INEW flag is removed from the inode and hence avoids the race conditions in questions. THis also means that xfs_create(), xfs_create_tmpfile() and xfs_symlink() need to finish the setup of the inode in their error paths if we had allocated the inode but failed later in the creation process. xfs_symlink(), in particular, needed a lot of help to make it's error handling match that of xfs_create(). Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2015-02-23 11:38:08 +00:00
* If we have a real type for an on-disk inode, we can setup the inode
* now. If it's a new inode being created, xfs_init_new_inode will
* handle it.
*/
if (xfs_iflags_test(ip, XFS_INEW) && VFS_I(ip)->i_mode != 0)
xfs: inodes are new until the dentry cache is set up Al Viro noticed a generic set of issues to do with filehandle lookup racing with dentry cache setup. They involve a filehandle lookup occurring while an inode is being created and the filehandle lookup racing with the dentry creation for the real file. This can lead to multiple dentries for the one path being instantiated. There are a host of other issues around this same set of paths. The underlying cause is that file handle lookup only waits on inode cache instantiation rather than full dentry cache instantiation. XFS is mostly immune to the problems discovered due to it's own internal inode cache, but there are a couple of corner cases where races can happen. We currently clear the XFS_INEW flag when the inode is fully set up after insertion into the cache. Newly allocated inodes are inserted locked and so aren't usable until the allocation transaction commits. This, however, occurs before the dentry and security information is fully initialised and hence the inode is unlocked and available for lookups to find too early. To solve the problem, only clear the XFS_INEW flag for newly created inodes once the dentry is fully instantiated. This means lookups will retry until the XFS_INEW flag is removed from the inode and hence avoids the race conditions in questions. THis also means that xfs_create(), xfs_create_tmpfile() and xfs_symlink() need to finish the setup of the inode in their error paths if we had allocated the inode but failed later in the creation process. xfs_symlink(), in particular, needed a lot of help to make it's error handling match that of xfs_create(). Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2015-02-23 11:38:08 +00:00
xfs_setup_existing_inode(ip);
return 0;
out_error_or_again:
if (!(flags & (XFS_IGET_INCORE | XFS_IGET_NORETRY)) &&
error == -EAGAIN) {
delay(1);
goto again;
}
xfs_perag_put(pag);
return error;
}
/*
* Grab the inode for reclaim exclusively.
*
* We have found this inode via a lookup under RCU, so the inode may have
* already been freed, or it may be in the process of being recycled by
* xfs_iget(). In both cases, the inode will have XFS_IRECLAIM set. If the inode
* has been fully recycled by the time we get the i_flags_lock, XFS_IRECLAIMABLE
* will not be set. Hence we need to check for both these flag conditions to
* avoid inodes that are no longer reclaim candidates.
*
* Note: checking for other state flags here, under the i_flags_lock or not, is
* racy and should be avoided. Those races should be resolved only after we have
* ensured that we are able to reclaim this inode and the world can see that we
* are going to reclaim it.
*
* Return true if we grabbed it, false otherwise.
*/
static bool
xfs_reclaim_igrab(
struct xfs_inode *ip,
struct xfs_icwalk *icw)
{
ASSERT(rcu_read_lock_held());
spin_lock(&ip->i_flags_lock);
if (!__xfs_iflags_test(ip, XFS_IRECLAIMABLE) ||
__xfs_iflags_test(ip, XFS_IRECLAIM)) {
/* not a reclaim candidate. */
spin_unlock(&ip->i_flags_lock);
return false;
}
/* Don't reclaim a sick inode unless the caller asked for it. */
if (ip->i_sick &&
(!icw || !(icw->icw_flags & XFS_ICWALK_FLAG_RECLAIM_SICK))) {
spin_unlock(&ip->i_flags_lock);
return false;
}
__xfs_iflags_set(ip, XFS_IRECLAIM);
spin_unlock(&ip->i_flags_lock);
return true;
}
/*
* Inode reclaim is non-blocking, so the default action if progress cannot be
* made is to "requeue" the inode for reclaim by unlocking it and clearing the
* XFS_IRECLAIM flag. If we are in a shutdown state, we don't care about
* blocking anymore and hence we can wait for the inode to be able to reclaim
* it.
*
* We do no IO here - if callers require inodes to be cleaned they must push the
* AIL first to trigger writeback of dirty inodes. This enables writeback to be
* done in the background in a non-blocking manner, and enables memory reclaim
* to make progress without blocking.
*/
static void
xfs_reclaim_inode(
struct xfs_inode *ip,
struct xfs_perag *pag)
{
2016-05-18 04:09:12 +00:00
xfs_ino_t ino = ip->i_ino; /* for radix_tree_delete */
if (!xfs_ilock_nowait(ip, XFS_ILOCK_EXCL))
goto out;
if (xfs_iflags_test_and_set(ip, XFS_IFLUSHING))
goto out_iunlock;
xfs: xfs_is_shutdown vs xlog_is_shutdown cage fight I've been chasing a recent resurgence in generic/388 recovery failure and/or corruption events. The events have largely been uninitialised inode chunks being tripped over in log recovery such as: XFS (pmem1): User initiated shutdown received. pmem1: writeback error on inode 12621949, offset 1019904, sector 12968096 XFS (pmem1): Log I/O Error (0x6) detected at xfs_fs_goingdown+0xa3/0xf0 (fs/xfs/xfs_fsops.c:500). Shutting down filesystem. XFS (pmem1): Please unmount the filesystem and rectify the problem(s) XFS (pmem1): Unmounting Filesystem XFS (pmem1): Mounting V5 Filesystem XFS (pmem1): Starting recovery (logdev: internal) XFS (pmem1): bad inode magic/vsn daddr 8723584 #0 (magic=1818) XFS (pmem1): Metadata corruption detected at xfs_inode_buf_verify+0x180/0x190, xfs_inode block 0x851c80 xfs_inode_buf_verify XFS (pmem1): Unmount and run xfs_repair XFS (pmem1): First 128 bytes of corrupted metadata buffer: 00000000: 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 ................ 00000010: 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 ................ 00000020: 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 ................ 00000030: 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 ................ 00000040: 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 ................ 00000050: 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 ................ 00000060: 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 ................ 00000070: 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 18 ................ XFS (pmem1): metadata I/O error in "xlog_recover_items_pass2+0x52/0xc0" at daddr 0x851c80 len 32 error 117 XFS (pmem1): log mount/recovery failed: error -117 XFS (pmem1): log mount failed There have been isolated random other issues, too - xfs_repair fails because it finds some corruption in symlink blocks, rmap inconsistencies, etc - but they are nowhere near as common as the uninitialised inode chunk failure. The problem has clearly happened at runtime before recovery has run; I can see the ICREATE log item in the log shortly before the actively recovered range of the log. This means the ICREATE was definitely created and written to the log, but for some reason the tail of the log has been moved past the ordered buffer log item that tracks INODE_ALLOC buffers and, supposedly, prevents the tail of the log moving past the ICREATE log item before the inode chunk buffer is written to disk. Tracing the fsstress processes that are running when the filesystem shut down immediately pin-pointed the problem: user shutdown marks xfs_mount as shutdown godown-213341 [008] 6398.022871: console: [ 6397.915392] XFS (pmem1): User initiated shutdown received. ..... aild tries to push ordered inode cluster buffer xfsaild/pmem1-213314 [001] 6398.022974: xfs_buf_trylock: dev 259:1 daddr 0x851c80 bbcount 0x20 hold 16 pincount 0 lock 0 flags DONE|INODES|PAGES caller xfs_inode_item_push+0x8e xfsaild/pmem1-213314 [001] 6398.022976: xfs_ilock_nowait: dev 259:1 ino 0x851c80 flags ILOCK_SHARED caller xfs_iflush_cluster+0xae xfs_iflush_cluster() checks xfs_is_shutdown(), returns true, calls xfs_iflush_abort() to kill writeback of the inode. Inode is removed from AIL, drops cluster buffer reference. xfsaild/pmem1-213314 [001] 6398.022977: xfs_ail_delete: dev 259:1 lip 0xffff88880247ed80 old lsn 7/20344 new lsn 7/21000 type XFS_LI_INODE flags IN_AIL xfsaild/pmem1-213314 [001] 6398.022978: xfs_buf_rele: dev 259:1 daddr 0x851c80 bbcount 0x20 hold 17 pincount 0 lock 0 flags DONE|INODES|PAGES caller xfs_iflush_abort+0xd7 ..... All inodes on cluster buffer are aborted, then the cluster buffer itself is aborted and removed from the AIL *without writeback*: xfsaild/pmem1-213314 [001] 6398.023011: xfs_buf_error_relse: dev 259:1 daddr 0x851c80 bbcount 0x20 hold 2 pincount 0 lock 0 flags ASYNC|DONE|STALE|INODES|PAGES caller xfs_buf_ioend_fail+0x33 xfsaild/pmem1-213314 [001] 6398.023012: xfs_ail_delete: dev 259:1 lip 0xffff8888053efde8 old lsn 7/20344 new lsn 7/20344 type XFS_LI_BUF flags IN_AIL The inode buffer was at 7/20344 when it was removed from the AIL. xfsaild/pmem1-213314 [001] 6398.023012: xfs_buf_item_relse: dev 259:1 daddr 0x851c80 bbcount 0x20 hold 2 pincount 0 lock 0 flags ASYNC|DONE|STALE|INODES|PAGES caller xfs_buf_item_done+0x31 xfsaild/pmem1-213314 [001] 6398.023012: xfs_buf_rele: dev 259:1 daddr 0x851c80 bbcount 0x20 hold 2 pincount 0 lock 0 flags ASYNC|DONE|STALE|INODES|PAGES caller xfs_buf_item_relse+0x39 ..... Userspace is still running, doing stuff. an fsstress process runs syncfs() or sync() and we end up in sync_fs_one_sb() which issues a log force. This pushes on the CIL: fsstress-213322 [001] 6398.024430: xfs_fs_sync_fs: dev 259:1 m_features 0x20000000019ff6e9 opstate (clean|shutdown|inodegc|blockgc) s_flags 0x70810000 caller sync_fs_one_sb+0x26 fsstress-213322 [001] 6398.024430: xfs_log_force: dev 259:1 lsn 0x0 caller xfs_fs_sync_fs+0x82 fsstress-213322 [001] 6398.024430: xfs_log_force: dev 259:1 lsn 0x5f caller xfs_log_force+0x7c <...>-194402 [001] 6398.024467: kmem_alloc: size 176 flags 0x14 caller xlog_cil_push_work+0x9f And the CIL fills up iclogs with pending changes. This picks up the current tail from the AIL: <...>-194402 [001] 6398.024497: xlog_iclog_get_space: dev 259:1 state XLOG_STATE_ACTIVE refcnt 1 offset 0 lsn 0x0 flags caller xlog_write+0x149 <...>-194402 [001] 6398.024498: xlog_iclog_switch: dev 259:1 state XLOG_STATE_ACTIVE refcnt 1 offset 0 lsn 0x700005408 flags caller xlog_state_get_iclog_space+0x37e <...>-194402 [001] 6398.024521: xlog_iclog_release: dev 259:1 state XLOG_STATE_WANT_SYNC refcnt 1 offset 32256 lsn 0x700005408 flags caller xlog_write+0x5f9 <...>-194402 [001] 6398.024522: xfs_log_assign_tail_lsn: dev 259:1 new tail lsn 7/21000, old lsn 7/20344, last sync 7/21448 And it moves the tail of the log to 7/21000 from 7/20344. This *moves the tail of the log beyond the ICREATE transaction* that was at 7/20344 and pinned by the inode cluster buffer that was cancelled above. .... godown-213341 [008] 6398.027005: xfs_force_shutdown: dev 259:1 tag logerror flags log_io|force_umount file fs/xfs/xfs_fsops.c line_num 500 godown-213341 [008] 6398.027022: console: [ 6397.915406] pmem1: writeback error on inode 12621949, offset 1019904, sector 12968096 godown-213341 [008] 6398.030551: console: [ 6397.919546] XFS (pmem1): Log I/O Error (0x6) detected at xfs_fs_goingdown+0xa3/0xf0 (fs/ And finally the log itself is now shutdown, stopping all further writes to the log. But this is too late to prevent the corruption that moving the tail of the log forwards after we start cancelling writeback causes. The fundamental problem here is that we are using the wrong shutdown checks for log items. We've long conflated mount shutdown with log shutdown state, and I started separating that recently with the atomic shutdown state changes in commit b36d4651e165 ("xfs: make forced shutdown processing atomic"). The changes in that commit series are directly responsible for being able to diagnose this issue because it clearly separated mount shutdown from log shutdown. Essentially, once we start cancelling writeback of log items and removing them from the AIL because the filesystem is shut down, we *cannot* update the journal because we may have cancelled the items that pin the tail of the log. That moves the tail of the log forwards without having written the metadata back, hence we have corrupt in memory state and writing to the journal propagates that to the on-disk state. What commit b36d4651e165 makes clear is that log item state needs to change relative to log shutdown, not mount shutdown. IOWs, anything that aborts metadata writeback needs to check log shutdown state because log items directly affect log consistency. Having them check mount shutdown state introduces the above race condition where we cancel metadata writeback before the log shuts down. To fix this, this patch works through all log items and converts shutdown checks to use xlog_is_shutdown() rather than xfs_is_shutdown(), so that we don't start aborting metadata writeback before we shut off journal writes. AFAICT, this race condition is a zero day IO error handling bug in XFS that dates back to the introduction of XLOG_IO_ERROR, XLOG_STATE_IOERROR and XFS_FORCED_SHUTDOWN back in January 1997. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org>
2022-03-17 16:09:13 +00:00
/*
* Check for log shutdown because aborting the inode can move the log
* tail and corrupt in memory state. This is fine if the log is shut
* down, but if the log is still active and only the mount is shut down
* then the in-memory log tail movement caused by the abort can be
* incorrectly propagated to disk.
*/
if (xlog_is_shutdown(ip->i_mount->m_log)) {
xfs_iunpin_wait(ip);
xfs_iflush_shutdown_abort(ip);
goto reclaim;
}
if (xfs_ipincount(ip))
goto out_clear_flush;
if (!xfs_inode_clean(ip))
goto out_clear_flush;
xfs_iflags_clear(ip, XFS_IFLUSHING);
reclaim:
xfs: per-cpu deferred inode inactivation queues Move inode inactivation to background work contexts so that it no longer runs in the context that releases the final reference to an inode. This will allow process work that ends up blocking on inactivation to continue doing work while the filesytem processes the inactivation in the background. A typical demonstration of this is unlinking an inode with lots of extents. The extents are removed during inactivation, so this blocks the process that unlinked the inode from the directory structure. By moving the inactivation to the background process, the userspace applicaiton can keep working (e.g. unlinking the next inode in the directory) while the inactivation work on the previous inode is done by a different CPU. The implementation of the queue is relatively simple. We use a per-cpu lockless linked list (llist) to queue inodes for inactivation without requiring serialisation mechanisms, and a work item to allow the queue to be processed by a CPU bound worker thread. We also keep a count of the queue depth so that we can trigger work after a number of deferred inactivations have been queued. The use of a bound workqueue with a single work depth allows the workqueue to run one work item per CPU. We queue the work item on the CPU we are currently running on, and so this essentially gives us affine per-cpu worker threads for the per-cpu queues. THis maintains the effective CPU affinity that occurs within XFS at the AG level due to all objects in a directory being local to an AG. Hence inactivation work tends to run on the same CPU that last accessed all the objects that inactivation accesses and this maintains hot CPU caches for unlink workloads. A depth of 32 inodes was chosen to match the number of inodes in an inode cluster buffer. This hopefully allows sequential allocation/unlink behaviours to defering inactivation of all the inodes in a single cluster buffer at a time, further helping maintain hot CPU and buffer cache accesses while running inactivations. A hard per-cpu queue throttle of 256 inode has been set to avoid runaway queuing when inodes that take a long to time inactivate are being processed. For example, when unlinking inodes with large numbers of extents that can take a lot of processing to free. Signed-off-by: Dave Chinner <dchinner@redhat.com> [djwong: tweak comments and tracepoints, convert opflags to state bits] Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org>
2021-08-06 18:05:39 +00:00
trace_xfs_inode_reclaiming(ip);
2016-05-18 04:09:12 +00:00
/*
* Because we use RCU freeing we need to ensure the inode always appears
* to be reclaimed with an invalid inode number when in the free state.
* We do this as early as possible under the ILOCK so that
* xfs_iflush_cluster() and xfs_ifree_cluster() can be guaranteed to
* detect races with us here. By doing this, we guarantee that once
* xfs_iflush_cluster() or xfs_ifree_cluster() has locked XFS_ILOCK that
* it will see either a valid inode that will serialise correctly, or it
* will see an invalid inode that it can skip.
2016-05-18 04:09:12 +00:00
*/
spin_lock(&ip->i_flags_lock);
ip->i_flags = XFS_IRECLAIM;
ip->i_ino = 0;
xfs: only reset incore inode health state flags when reclaiming an inode While running some fuzz tests on inode metadata, I noticed that the filesystem health report (as provided by xfs_spaceman) failed to report the file corruption even when spaceman was run immediately after running xfs_scrub to detect the corruption. That isn't the intended behavior; one ought to be able to run scrub to detect errors in the ondisk metadata and be able to access to those reports for some time after the scrub. After running the same sequence through an instrumented kernel, I discovered the reason why -- scrub igets the file, scans it, marks it sick, and ireleases the inode. When the VFS lets go of the incore inode, it moves to RECLAIMABLE state. If spaceman igets the incore inode before it moves to RECLAIM state, iget reinitializes the VFS state, clears the sick and checked masks, and hands back the inode. At this point, the caller has the exact same incore inode, but with all the health state erased. In other words, we're erasing the incore inode's health state flags when we've decided NOT to sever the link between the incore inode and the ondisk inode. This is wrong, so we need to remove the lines that zero the fields from xfs_iget_cache_hit. As a precaution, we add the same lines into xfs_reclaim_inode just after we sever the link between incore and ondisk inode. Strictly speaking this isn't necessary because once an inode has gone through reclaim it must go through xfs_inode_alloc (which also zeroes the state) and xfs_iget is careful to check for mismatches between the inode it pulls out of the radix tree and the one it wants. Fixes: 6772c1f11206 ("xfs: track metadata health status") Signed-off-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
2021-06-07 16:34:49 +00:00
ip->i_sick = 0;
ip->i_checked = 0;
2016-05-18 04:09:12 +00:00
spin_unlock(&ip->i_flags_lock);
xfs: add log item precommit operation For inodes that are dirty, we have an attached cluster buffer that we want to use to track the dirty inode through the AIL. Unfortunately, locking the cluster buffer and adding it to the transaction when the inode is first logged in a transaction leads to buffer lock ordering inversions. The specific problem is ordering against the AGI buffer. When modifying unlinked lists, the buffer lock order is AGI -> inode cluster buffer as the AGI buffer lock serialises all access to the unlinked lists. Unfortunately, functionality like xfs_droplink() logs the inode before calling xfs_iunlink(), as do various directory manipulation functions. The inode can be logged way down in the stack as far as the bmapi routines and hence, without a major rewrite of lots of APIs there's no way we can avoid the inode being logged by something until after the AGI has been logged. As we are going to be using ordered buffers for inode AIL tracking, there isn't a need to actually lock that buffer against modification as all the modifications are captured by logging the inode item itself. Hence we don't actually need to join the cluster buffer into the transaction until just before it is committed. This means we do not perturb any of the existing buffer lock orders in transactions, and the inode cluster buffer is always locked last in a transaction that doesn't otherwise touch inode cluster buffers. We do this by introducing a precommit log item method. This commit just introduces the mechanism; the inode item implementation is in followup commits. The precommit items need to be sorted into consistent order as we may be locking multiple items here. Hence if we have two dirty inodes in cluster buffers A and B, and some other transaction has two separate dirty inodes in the same cluster buffers, locking them in different orders opens us up to ABBA deadlocks. Hence we sort the items on the transaction based on the presence of a sort log item method. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de>
2022-07-14 01:47:26 +00:00
ASSERT(!ip->i_itemp || ip->i_itemp->ili_item.li_buf == NULL);
xfs_iunlock(ip, XFS_ILOCK_EXCL);
XFS_STATS_INC(ip->i_mount, xs_ig_reclaims);
/*
* Remove the inode from the per-AG radix tree.
*
* Because radix_tree_delete won't complain even if the item was never
* added to the tree assert that it's been there before to catch
* problems with the inode life time early on.
*/
spin_lock(&pag->pag_ici_lock);
if (!radix_tree_delete(&pag->pag_ici_root,
2016-05-18 04:09:12 +00:00
XFS_INO_TO_AGINO(ip->i_mount, ino)))
ASSERT(0);
xfs_perag_clear_inode_tag(pag, NULLAGINO, XFS_ICI_RECLAIM_TAG);
spin_unlock(&pag->pag_ici_lock);
/*
* Here we do an (almost) spurious inode lock in order to coordinate
* with inode cache radix tree lookups. This is because the lookup
* can reference the inodes in the cache without taking references.
*
* We make that OK here by ensuring that we wait until the inode is
* unlocked after the lookup before we go ahead and free it.
*/
xfs_ilock(ip, XFS_ILOCK_EXCL);
ASSERT(!ip->i_udquot && !ip->i_gdquot && !ip->i_pdquot);
xfs_iunlock(ip, XFS_ILOCK_EXCL);
xfs: Don't allow logging of XFS_ISTALE inodes In tracking down a problem in this patchset, I discovered we are reclaiming dirty stale inodes. This wasn't discovered until inodes were always attached to the cluster buffer and then the rcu callback that freed inodes was assert failing because the inode still had an active pointer to the cluster buffer after it had been reclaimed. Debugging the issue indicated that this was a pre-existing issue resulting from the way the inodes are handled in xfs_inactive_ifree. When we free a cluster buffer from xfs_ifree_cluster, all the inodes in cache are marked XFS_ISTALE. Those that are clean have nothing else done to them and so eventually get cleaned up by background reclaim. i.e. it is assumed we'll never dirty/relog an inode marked XFS_ISTALE. On journal commit dirty stale inodes as are handled by both buffer and inode log items to run though xfs_istale_done() and removed from the AIL (buffer log item commit) or the log item will simply unpin it because the buffer log item will clean it. What happens to any specific inode is entirely dependent on which log item wins the commit race, but the result is the same - stale inodes are clean, not attached to the cluster buffer, and not in the AIL. Hence inode reclaim can just free these inodes without further care. However, if the stale inode is relogged, it gets dirtied again and relogged into the CIL. Most of the time this isn't an issue, because relogging simply changes the inode's location in the current checkpoint. Problems arise, however, when the CIL checkpoints between two transactions in the xfs_inactive_ifree() deferops processing. This results in the XFS_ISTALE inode being redirtied and inserted into the CIL without any of the other stale cluster buffer infrastructure being in place. Hence on journal commit, it simply gets unpinned, so it remains dirty in memory. Everything in inode writeback avoids XFS_ISTALE inodes so it can't be written back, and it is not tracked in the AIL so there's not even a trigger to attempt to clean the inode. Hence the inode just sits dirty in memory until inode reclaim comes along, sees that it is XFS_ISTALE, and goes to reclaim it. This reclaiming of a dirty inode caused use after free, list corruptions and other nasty issues later in this patchset. Hence this patch addresses a violation of the "never log XFS_ISTALE inodes" caused by the deferops processing rolling a transaction and relogging a stale inode in xfs_inactive_free. It also adds a bunch of asserts to catch this problem in debug kernels so that we don't reintroduce this problem in future. Reproducer for this issue was generic/558 on a v4 filesystem. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2020-06-29 21:48:45 +00:00
ASSERT(xfs_inode_clean(ip));
2016-05-18 04:09:12 +00:00
__xfs_inode_free(ip);
return;
out_clear_flush:
xfs_iflags_clear(ip, XFS_IFLUSHING);
out_iunlock:
xfs_iunlock(ip, XFS_ILOCK_EXCL);
out:
xfs_iflags_clear(ip, XFS_IRECLAIM);
}
/* Reclaim sick inodes if we're unmounting or the fs went down. */
static inline bool
xfs_want_reclaim_sick(
struct xfs_mount *mp)
{
return xfs_is_unmounting(mp) || xfs_has_norecovery(mp) ||
xfs_is_shutdown(mp);
}
void
xfs_reclaim_inodes(
struct xfs_mount *mp)
{
struct xfs_icwalk icw = {
.icw_flags = 0,
};
if (xfs_want_reclaim_sick(mp))
icw.icw_flags |= XFS_ICWALK_FLAG_RECLAIM_SICK;
while (radix_tree_tagged(&mp->m_perag_tree, XFS_ICI_RECLAIM_TAG)) {
xfs_ail_push_all_sync(mp->m_ail);
xfs_icwalk(mp, XFS_ICWALK_RECLAIM, &icw);
}
}
/*
* The shrinker infrastructure determines how many inodes we should scan for
* reclaim. We want as many clean inodes ready to reclaim as possible, so we
* push the AIL here. We also want to proactively free up memory if we can to
* minimise the amount of work memory reclaim has to do so we kick the
* background reclaim if it isn't already scheduled.
*/
shrinker: convert superblock shrinkers to new API Convert superblock shrinker to use the new count/scan API, and propagate the API changes through to the filesystem callouts. The filesystem callouts already use a count/scan API, so it's just changing counters to longs to match the VM API. This requires the dentry and inode shrinker callouts to be converted to the count/scan API. This is mainly a mechanical change. [glommer@openvz.org: use mult_frac for fractional proportions, build fixes] Signed-off-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Glauber Costa <glommer@openvz.org> Acked-by: Mel Gorman <mgorman@suse.de> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Cc: Arve Hjønnevåg <arve@android.com> Cc: Carlos Maiolino <cmaiolino@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Chuck Lever <chuck.lever@oracle.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: David Rientjes <rientjes@google.com> Cc: Gleb Natapov <gleb@redhat.com> Cc: Greg Thelen <gthelen@google.com> Cc: J. Bruce Fields <bfields@redhat.com> Cc: Jan Kara <jack@suse.cz> Cc: Jerome Glisse <jglisse@redhat.com> Cc: John Stultz <john.stultz@linaro.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Kent Overstreet <koverstreet@google.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Thomas Hellstrom <thellstrom@vmware.com> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-08-28 00:17:57 +00:00
long
xfs_reclaim_inodes_nr(
struct xfs_mount *mp,
unsigned long nr_to_scan)
{
struct xfs_icwalk icw = {
.icw_flags = XFS_ICWALK_FLAG_SCAN_LIMIT,
.icw_scan_limit = min_t(unsigned long, LONG_MAX, nr_to_scan),
};
if (xfs_want_reclaim_sick(mp))
icw.icw_flags |= XFS_ICWALK_FLAG_RECLAIM_SICK;
/* kick background reclaimer and push the AIL */
xfs_reclaim_work_queue(mp);
xfs_ail_push_all(mp->m_ail);
xfs: introduce background inode reclaim work Background inode reclaim needs to run more frequently that the XFS syncd work is run as 30s is too long between optimal reclaim runs. Add a new periodic work item to the xfs syncd workqueue to run a fast, non-blocking inode reclaim scan. Background inode reclaim is kicked by the act of marking inodes for reclaim. When an AG is first marked as having reclaimable inodes, the background reclaim work is kicked. It will continue to run periodically untill it detects that there are no more reclaimable inodes. It will be kicked again when the first inode is queued for reclaim. To ensure shrinker based inode reclaim throttles to the inode cleaning and reclaim rate but still reclaim inodes efficiently, make it kick the background inode reclaim so that when we are low on memory we are trying to reclaim inodes as efficiently as possible. This kick shoul d not be necessary, but it will protect against failures to kick the background reclaim when inodes are first dirtied. To provide the rate throttling, make the shrinker pass do synchronous inode reclaim so that it blocks on inodes under IO. This means that the shrinker will reclaim inodes rather than just skipping over them, but it does not adversely affect the rate of reclaim because most dirty inodes are already under IO due to the background reclaim work the shrinker kicked. These two modifications solve one of the two OOM killer invocations Chris Mason reported recently when running a stress testing script. The particular workload trigger for the OOM killer invocation is where there are more threads than CPUs all unlinking files in an extremely memory constrained environment. Unlike other solutions, this one does not have a performance impact on performance when memory is not constrained or the number of concurrent threads operating is <= to the number of CPUs. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Alex Elder <aelder@sgi.com>
2011-04-08 02:45:07 +00:00
xfs_icwalk(mp, XFS_ICWALK_RECLAIM, &icw);
return 0;
}
/*
* Return the number of reclaimable inodes in the filesystem for
* the shrinker to determine how much to reclaim.
*/
long
xfs_reclaim_inodes_count(
struct xfs_mount *mp)
{
struct xfs_perag *pag;
xfs_agnumber_t ag = 0;
long reclaimable = 0;
while ((pag = xfs_perag_get_tag(mp, ag, XFS_ICI_RECLAIM_TAG))) {
ag = pag->pag_agno + 1;
reclaimable += pag->pag_ici_reclaimable;
xfs_perag_put(pag);
}
return reclaimable;
}
STATIC bool
xfs_icwalk_match_id(
struct xfs_inode *ip,
struct xfs_icwalk *icw)
{
if ((icw->icw_flags & XFS_ICWALK_FLAG_UID) &&
!uid_eq(VFS_I(ip)->i_uid, icw->icw_uid))
return false;
if ((icw->icw_flags & XFS_ICWALK_FLAG_GID) &&
!gid_eq(VFS_I(ip)->i_gid, icw->icw_gid))
return false;
if ((icw->icw_flags & XFS_ICWALK_FLAG_PRID) &&
ip->i_projid != icw->icw_prid)
return false;
return true;
}
/*
* A union-based inode filtering algorithm. Process the inode if any of the
* criteria match. This is for global/internal scans only.
*/
STATIC bool
xfs_icwalk_match_id_union(
struct xfs_inode *ip,
struct xfs_icwalk *icw)
{
if ((icw->icw_flags & XFS_ICWALK_FLAG_UID) &&
uid_eq(VFS_I(ip)->i_uid, icw->icw_uid))
return true;
if ((icw->icw_flags & XFS_ICWALK_FLAG_GID) &&
gid_eq(VFS_I(ip)->i_gid, icw->icw_gid))
return true;
if ((icw->icw_flags & XFS_ICWALK_FLAG_PRID) &&
ip->i_projid == icw->icw_prid)
return true;
return false;
}
/*
* Is this inode @ip eligible for eof/cow block reclamation, given some
* filtering parameters @icw? The inode is eligible if @icw is null or
* if the predicate functions match.
*/
static bool
xfs_icwalk_match(
struct xfs_inode *ip,
struct xfs_icwalk *icw)
{
bool match;
if (!icw)
return true;
if (icw->icw_flags & XFS_ICWALK_FLAG_UNION)
match = xfs_icwalk_match_id_union(ip, icw);
else
match = xfs_icwalk_match_id(ip, icw);
if (!match)
return false;
/* skip the inode if the file size is too small */
if ((icw->icw_flags & XFS_ICWALK_FLAG_MINFILESIZE) &&
XFS_ISIZE(ip) < icw->icw_min_file_size)
return false;
return true;
}
/*
* This is a fast pass over the inode cache to try to get reclaim moving on as
* many inodes as possible in a short period of time. It kicks itself every few
* seconds, as well as being kicked by the inode cache shrinker when memory
* goes low.
*/
void
xfs_reclaim_worker(
struct work_struct *work)
{
struct xfs_mount *mp = container_of(to_delayed_work(work),
struct xfs_mount, m_reclaim_work);
xfs_icwalk(mp, XFS_ICWALK_RECLAIM, NULL);
xfs_reclaim_work_queue(mp);
}
STATIC int
xfs_inode_free_eofblocks(
struct xfs_inode *ip,
struct xfs_icwalk *icw,
unsigned int *lockflags)
{
bool wait;
wait = icw && (icw->icw_flags & XFS_ICWALK_FLAG_SYNC);
if (!xfs_iflags_test(ip, XFS_IEOFBLOCKS))
return 0;
/*
* If the mapping is dirty the operation can block and wait for some
* time. Unless we are waiting, skip it.
*/
if (!wait && mapping_tagged(VFS_I(ip)->i_mapping, PAGECACHE_TAG_DIRTY))
return 0;
if (!xfs_icwalk_match(ip, icw))
return 0;
/*
* If the caller is waiting, return -EAGAIN to keep the background
* scanner moving and revisit the inode in a subsequent pass.
*/
xfs: sync eofblocks scans under iolock are livelock prone The xfs_eofblocks.eof_scan_owner field is an internal field to facilitate invoking eofb scans from the kernel while under the iolock. This is necessary because the eofb scan acquires the iolock of each inode. Synchronous scans are invoked on certain buffered write failures while under iolock. In such cases, the scan owner indicates that the context for the scan already owns the particular iolock and prevents a double lock deadlock. eofblocks scans while under iolock are still livelock prone in the event of multiple parallel scans, however. If multiple buffered writes to different inodes fail and invoke eofblocks scans at the same time, each scan avoids a deadlock with its own inode by virtue of the eof_scan_owner field, but will never be able to acquire the iolock of the inode from the parallel scan. Because the low free space scans are invoked with SYNC_WAIT, the scan will not return until it has processed every tagged inode and thus both scans will spin indefinitely on the iolock being held across the opposite scan. This problem can be reproduced reliably by generic/224 on systems with higher cpu counts (x16). To avoid this problem, simplify the semantics of eofblocks scans to never invoke a scan while under iolock. This means that the buffered write context must drop the iolock before the scan. It must reacquire the lock before the write retry and also repeat the initial write checks, as the original state might no longer be valid once the iolock was dropped. Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2017-01-28 07:22:56 +00:00
if (!xfs_ilock_nowait(ip, XFS_IOLOCK_EXCL)) {
if (wait)
return -EAGAIN;
return 0;
}
*lockflags |= XFS_IOLOCK_EXCL;
if (xfs_can_free_eofblocks(ip, false))
return xfs_free_eofblocks(ip);
/* inode could be preallocated or append-only */
trace_xfs_inode_free_eofblocks_invalid(ip);
xfs_inode_clear_eofblocks_tag(ip);
return 0;
}
static void
xfs_blockgc_set_iflag(
struct xfs_inode *ip,
unsigned long iflag)
{
struct xfs_mount *mp = ip->i_mount;
struct xfs_perag *pag;
ASSERT((iflag & ~(XFS_IEOFBLOCKS | XFS_ICOWBLOCKS)) == 0);
/*
* Don't bother locking the AG and looking up in the radix trees
* if we already know that we have the tag set.
*/
if (ip->i_flags & iflag)
return;
spin_lock(&ip->i_flags_lock);
ip->i_flags |= iflag;
spin_unlock(&ip->i_flags_lock);
pag = xfs_perag_get(mp, XFS_INO_TO_AGNO(mp, ip->i_ino));
spin_lock(&pag->pag_ici_lock);
xfs_perag_set_inode_tag(pag, XFS_INO_TO_AGINO(mp, ip->i_ino),
XFS_ICI_BLOCKGC_TAG);
spin_unlock(&pag->pag_ici_lock);
xfs_perag_put(pag);
}
void
xfs_inode_set_eofblocks_tag(
xfs_inode_t *ip)
{
trace_xfs_inode_set_eofblocks_tag(ip);
return xfs_blockgc_set_iflag(ip, XFS_IEOFBLOCKS);
}
static void
xfs_blockgc_clear_iflag(
struct xfs_inode *ip,
unsigned long iflag)
{
struct xfs_mount *mp = ip->i_mount;
struct xfs_perag *pag;
bool clear_tag;
ASSERT((iflag & ~(XFS_IEOFBLOCKS | XFS_ICOWBLOCKS)) == 0);
spin_lock(&ip->i_flags_lock);
ip->i_flags &= ~iflag;
clear_tag = (ip->i_flags & (XFS_IEOFBLOCKS | XFS_ICOWBLOCKS)) == 0;
spin_unlock(&ip->i_flags_lock);
if (!clear_tag)
return;
pag = xfs_perag_get(mp, XFS_INO_TO_AGNO(mp, ip->i_ino));
spin_lock(&pag->pag_ici_lock);
xfs_perag_clear_inode_tag(pag, XFS_INO_TO_AGINO(mp, ip->i_ino),
XFS_ICI_BLOCKGC_TAG);
spin_unlock(&pag->pag_ici_lock);
xfs_perag_put(pag);
}
void
xfs_inode_clear_eofblocks_tag(
xfs_inode_t *ip)
{
trace_xfs_inode_clear_eofblocks_tag(ip);
return xfs_blockgc_clear_iflag(ip, XFS_IEOFBLOCKS);
}
/*
* Set ourselves up to free CoW blocks from this file. If it's already clean
* then we can bail out quickly, but otherwise we must back off if the file
* is undergoing some kind of write.
*/
static bool
xfs_prep_free_cowblocks(
struct xfs_inode *ip)
{
xfs: don't skip cow forks w/ delalloc blocks in cowblocks scan The cowblocks background scanner currently clears the cowblocks tag for inodes without any real allocations in the cow fork. This excludes inodes with only delalloc blocks in the cow fork. While we might never expect to clear delalloc blocks from the cow fork in the background scanner, it is not necessarily correct to clear the cowblocks tag from such inodes. For example, if the background scanner happens to process an inode between a buffered write and writeback, the scanner catches the inode in a state after delalloc blocks have been allocated to the cow fork but before the delalloc blocks have been converted to real blocks by writeback. The background scanner then incorrectly clears the cowblocks tag, even if part of the aforementioned delalloc reservation will not be remapped to the data fork (i.e., extra blocks due to the cowextsize hint). This means that any such additional blocks in the cow fork might never be reclaimed by the background scanner and could persist until the inode itself is reclaimed. To address this problem, only skip and clear inodes without any cow fork allocations whatsoever from the background scanner. While we generally do not want to cancel delalloc reservations from the background scanner, the pagecache dirty check following the cowblocks check should prevent that situation. If we do end up with delalloc cow fork blocks without a dirty address space mapping, this is probably an indication that something has gone wrong and the blocks should be reclaimed, as they may never be converted to a real allocation. Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2016-11-08 01:53:33 +00:00
/*
* Just clear the tag if we have an empty cow fork or none at all. It's
* possible the inode was fully unshared since it was originally tagged.
*/
if (!xfs_inode_has_cow_data(ip)) {
trace_xfs_inode_free_cowblocks_invalid(ip);
xfs_inode_clear_cowblocks_tag(ip);
return false;
}
/*
* If the mapping is dirty or under writeback we cannot touch the
* CoW fork. Leave it alone if we're in the midst of a directio.
*/
if ((VFS_I(ip)->i_state & I_DIRTY_PAGES) ||
mapping_tagged(VFS_I(ip)->i_mapping, PAGECACHE_TAG_DIRTY) ||
mapping_tagged(VFS_I(ip)->i_mapping, PAGECACHE_TAG_WRITEBACK) ||
atomic_read(&VFS_I(ip)->i_dio_count))
return false;
return true;
}
/*
* Automatic CoW Reservation Freeing
*
* These functions automatically garbage collect leftover CoW reservations
* that were made on behalf of a cowextsize hint when we start to run out
* of quota or when the reservations sit around for too long. If the file
* has dirty pages or is undergoing writeback, its CoW reservations will
* be retained.
*
* The actual garbage collection piggybacks off the same code that runs
* the speculative EOF preallocation garbage collector.
*/
STATIC int
xfs_inode_free_cowblocks(
struct xfs_inode *ip,
struct xfs_icwalk *icw,
unsigned int *lockflags)
{
bool wait;
int ret = 0;
wait = icw && (icw->icw_flags & XFS_ICWALK_FLAG_SYNC);
if (!xfs_iflags_test(ip, XFS_ICOWBLOCKS))
return 0;
if (!xfs_prep_free_cowblocks(ip))
return 0;
if (!xfs_icwalk_match(ip, icw))
return 0;
/*
* If the caller is waiting, return -EAGAIN to keep the background
* scanner moving and revisit the inode in a subsequent pass.
*/
if (!(*lockflags & XFS_IOLOCK_EXCL) &&
!xfs_ilock_nowait(ip, XFS_IOLOCK_EXCL)) {
if (wait)
return -EAGAIN;
return 0;
}
*lockflags |= XFS_IOLOCK_EXCL;
if (!xfs_ilock_nowait(ip, XFS_MMAPLOCK_EXCL)) {
if (wait)
return -EAGAIN;
return 0;
}
*lockflags |= XFS_MMAPLOCK_EXCL;
/*
* Check again, nobody else should be able to dirty blocks or change
* the reflink iflag now that we have the first two locks held.
*/
if (xfs_prep_free_cowblocks(ip))
ret = xfs_reflink_cancel_cow_range(ip, 0, NULLFILEOFF, false);
return ret;
}
void
xfs_inode_set_cowblocks_tag(
xfs_inode_t *ip)
{
trace_xfs_inode_set_cowblocks_tag(ip);
return xfs_blockgc_set_iflag(ip, XFS_ICOWBLOCKS);
}
void
xfs_inode_clear_cowblocks_tag(
xfs_inode_t *ip)
{
trace_xfs_inode_clear_cowblocks_tag(ip);
return xfs_blockgc_clear_iflag(ip, XFS_ICOWBLOCKS);
}
/* Disable post-EOF and CoW block auto-reclamation. */
void
xfs_blockgc_stop(
struct xfs_mount *mp)
{
struct xfs_perag *pag;
xfs_agnumber_t agno;
if (!xfs_clear_blockgc_enabled(mp))
return;
for_each_perag(mp, agno, pag)
cancel_delayed_work_sync(&pag->pag_blockgc_work);
trace_xfs_blockgc_stop(mp, __return_address);
}
/* Enable post-EOF and CoW block auto-reclamation. */
void
xfs_blockgc_start(
struct xfs_mount *mp)
{
struct xfs_perag *pag;
xfs_agnumber_t agno;
if (xfs_set_blockgc_enabled(mp))
return;
trace_xfs_blockgc_start(mp, __return_address);
for_each_perag_tag(mp, agno, pag, XFS_ICI_BLOCKGC_TAG)
xfs_blockgc_queue(pag);
}
/* Don't try to run block gc on an inode that's in any of these states. */
#define XFS_BLOCKGC_NOGRAB_IFLAGS (XFS_INEW | \
xfs: per-cpu deferred inode inactivation queues Move inode inactivation to background work contexts so that it no longer runs in the context that releases the final reference to an inode. This will allow process work that ends up blocking on inactivation to continue doing work while the filesytem processes the inactivation in the background. A typical demonstration of this is unlinking an inode with lots of extents. The extents are removed during inactivation, so this blocks the process that unlinked the inode from the directory structure. By moving the inactivation to the background process, the userspace applicaiton can keep working (e.g. unlinking the next inode in the directory) while the inactivation work on the previous inode is done by a different CPU. The implementation of the queue is relatively simple. We use a per-cpu lockless linked list (llist) to queue inodes for inactivation without requiring serialisation mechanisms, and a work item to allow the queue to be processed by a CPU bound worker thread. We also keep a count of the queue depth so that we can trigger work after a number of deferred inactivations have been queued. The use of a bound workqueue with a single work depth allows the workqueue to run one work item per CPU. We queue the work item on the CPU we are currently running on, and so this essentially gives us affine per-cpu worker threads for the per-cpu queues. THis maintains the effective CPU affinity that occurs within XFS at the AG level due to all objects in a directory being local to an AG. Hence inactivation work tends to run on the same CPU that last accessed all the objects that inactivation accesses and this maintains hot CPU caches for unlink workloads. A depth of 32 inodes was chosen to match the number of inodes in an inode cluster buffer. This hopefully allows sequential allocation/unlink behaviours to defering inactivation of all the inodes in a single cluster buffer at a time, further helping maintain hot CPU and buffer cache accesses while running inactivations. A hard per-cpu queue throttle of 256 inode has been set to avoid runaway queuing when inodes that take a long to time inactivate are being processed. For example, when unlinking inodes with large numbers of extents that can take a lot of processing to free. Signed-off-by: Dave Chinner <dchinner@redhat.com> [djwong: tweak comments and tracepoints, convert opflags to state bits] Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org>
2021-08-06 18:05:39 +00:00
XFS_NEED_INACTIVE | \
XFS_INACTIVATING | \
XFS_IRECLAIMABLE | \
XFS_IRECLAIM)
/*
* Decide if the given @ip is eligible for garbage collection of speculative
* preallocations, and grab it if so. Returns true if it's ready to go or
* false if we should just ignore it.
*/
static bool
xfs_blockgc_igrab(
struct xfs_inode *ip)
{
struct inode *inode = VFS_I(ip);
ASSERT(rcu_read_lock_held());
/* Check for stale RCU freed inode */
spin_lock(&ip->i_flags_lock);
if (!ip->i_ino)
goto out_unlock_noent;
if (ip->i_flags & XFS_BLOCKGC_NOGRAB_IFLAGS)
goto out_unlock_noent;
spin_unlock(&ip->i_flags_lock);
/* nothing to sync during shutdown */
if (xfs_is_shutdown(ip->i_mount))
return false;
/* If we can't grab the inode, it must on it's way to reclaim. */
if (!igrab(inode))
return false;
/* inode is valid */
return true;
out_unlock_noent:
spin_unlock(&ip->i_flags_lock);
return false;
}
/* Scan one incore inode for block preallocations that we can remove. */
static int
xfs_blockgc_scan_inode(
struct xfs_inode *ip,
struct xfs_icwalk *icw)
{
unsigned int lockflags = 0;
int error;
error = xfs_inode_free_eofblocks(ip, icw, &lockflags);
if (error)
goto unlock;
error = xfs_inode_free_cowblocks(ip, icw, &lockflags);
unlock:
if (lockflags)
xfs_iunlock(ip, lockflags);
xfs_irele(ip);
return error;
}
/* Background worker that trims preallocated space. */
void
xfs_blockgc_worker(
struct work_struct *work)
{
struct xfs_perag *pag = container_of(to_delayed_work(work),
struct xfs_perag, pag_blockgc_work);
struct xfs_mount *mp = pag->pag_mount;
int error;
trace_xfs_blockgc_worker(mp, __return_address);
error = xfs_icwalk_ag(pag, XFS_ICWALK_BLOCKGC, NULL);
if (error)
xfs_info(mp, "AG %u preallocation gc worker failed, err=%d",
pag->pag_agno, error);
xfs_blockgc_queue(pag);
}
/*
* Try to free space in the filesystem by purging inactive inodes, eofblocks
* and cowblocks.
*/
int
xfs_blockgc_free_space(
struct xfs_mount *mp,
struct xfs_icwalk *icw)
{
int error;
trace_xfs_blockgc_free_space(mp, icw, _RET_IP_);
error = xfs_icwalk(mp, XFS_ICWALK_BLOCKGC, icw);
if (error)
return error;
xfs: collect errors from inodegc for unlinked inode recovery Unlinked list recovery requires errors removing the inode the from the unlinked list get fed back to the main recovery loop. Now that we offload the unlinking to the inodegc work, we don't get errors being fed back when we trip over a corruption that prevents the inode from being removed from the unlinked list. This means we never clear the corrupt unlinked list bucket, resulting in runtime operations eventually tripping over it and shutting down. Fix this by collecting inodegc worker errors and feed them back to the flush caller. This is largely best effort - the only context that really cares is log recovery, and it only flushes a single inode at a time so we don't need complex synchronised handling. Essentially the inodegc workers will capture the first error that occurs and the next flush will gather them and clear them. The flush itself will only report the first gathered error. In the cases where callers can return errors, propagate the collected inodegc flush error up the error handling chain. In the case of inode unlinked list recovery, there are several superfluous calls to flush queued unlinked inodes - xlog_recover_iunlink_bucket() guarantees that it has flushed the inodegc and collected errors before it returns. Hence nothing in the calling path needs to run a flush, even when an error is returned. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Dave Chinner <david@fromorbit.com>
2023-06-05 04:48:15 +00:00
return xfs_inodegc_flush(mp);
}
/*
* Reclaim all the free space that we can by scheduling the background blockgc
* and inodegc workers immediately and waiting for them all to clear.
*/
xfs: collect errors from inodegc for unlinked inode recovery Unlinked list recovery requires errors removing the inode the from the unlinked list get fed back to the main recovery loop. Now that we offload the unlinking to the inodegc work, we don't get errors being fed back when we trip over a corruption that prevents the inode from being removed from the unlinked list. This means we never clear the corrupt unlinked list bucket, resulting in runtime operations eventually tripping over it and shutting down. Fix this by collecting inodegc worker errors and feed them back to the flush caller. This is largely best effort - the only context that really cares is log recovery, and it only flushes a single inode at a time so we don't need complex synchronised handling. Essentially the inodegc workers will capture the first error that occurs and the next flush will gather them and clear them. The flush itself will only report the first gathered error. In the cases where callers can return errors, propagate the collected inodegc flush error up the error handling chain. In the case of inode unlinked list recovery, there are several superfluous calls to flush queued unlinked inodes - xlog_recover_iunlink_bucket() guarantees that it has flushed the inodegc and collected errors before it returns. Hence nothing in the calling path needs to run a flush, even when an error is returned. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Dave Chinner <david@fromorbit.com>
2023-06-05 04:48:15 +00:00
int
xfs_blockgc_flush_all(
struct xfs_mount *mp)
{
struct xfs_perag *pag;
xfs_agnumber_t agno;
trace_xfs_blockgc_flush_all(mp, __return_address);
/*
* For each blockgc worker, move its queue time up to now. If it
* wasn't queued, it will not be requeued. Then flush whatever's
* left.
*/
for_each_perag_tag(mp, agno, pag, XFS_ICI_BLOCKGC_TAG)
mod_delayed_work(pag->pag_mount->m_blockgc_wq,
&pag->pag_blockgc_work, 0);
for_each_perag_tag(mp, agno, pag, XFS_ICI_BLOCKGC_TAG)
flush_delayed_work(&pag->pag_blockgc_work);
xfs: collect errors from inodegc for unlinked inode recovery Unlinked list recovery requires errors removing the inode the from the unlinked list get fed back to the main recovery loop. Now that we offload the unlinking to the inodegc work, we don't get errors being fed back when we trip over a corruption that prevents the inode from being removed from the unlinked list. This means we never clear the corrupt unlinked list bucket, resulting in runtime operations eventually tripping over it and shutting down. Fix this by collecting inodegc worker errors and feed them back to the flush caller. This is largely best effort - the only context that really cares is log recovery, and it only flushes a single inode at a time so we don't need complex synchronised handling. Essentially the inodegc workers will capture the first error that occurs and the next flush will gather them and clear them. The flush itself will only report the first gathered error. In the cases where callers can return errors, propagate the collected inodegc flush error up the error handling chain. In the case of inode unlinked list recovery, there are several superfluous calls to flush queued unlinked inodes - xlog_recover_iunlink_bucket() guarantees that it has flushed the inodegc and collected errors before it returns. Hence nothing in the calling path needs to run a flush, even when an error is returned. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Dave Chinner <david@fromorbit.com>
2023-06-05 04:48:15 +00:00
return xfs_inodegc_flush(mp);
}
/*
* Run cow/eofblocks scans on the supplied dquots. We don't know exactly which
* quota caused an allocation failure, so we make a best effort by including
* each quota under low free space conditions (less than 1% free space) in the
* scan.
*
* Callers must not hold any inode's ILOCK. If requesting a synchronous scan
* (XFS_ICWALK_FLAG_SYNC), the caller also must not hold any inode's IOLOCK or
* MMAPLOCK.
*/
int
xfs_blockgc_free_dquots(
struct xfs_mount *mp,
struct xfs_dquot *udqp,
struct xfs_dquot *gdqp,
struct xfs_dquot *pdqp,
unsigned int iwalk_flags)
{
struct xfs_icwalk icw = {0};
bool do_work = false;
if (!udqp && !gdqp && !pdqp)
return 0;
/*
* Run a scan to free blocks using the union filter to cover all
* applicable quotas in a single scan.
*/
icw.icw_flags = XFS_ICWALK_FLAG_UNION | iwalk_flags;
if (XFS_IS_UQUOTA_ENFORCED(mp) && udqp && xfs_dquot_lowsp(udqp)) {
icw.icw_uid = make_kuid(mp->m_super->s_user_ns, udqp->q_id);
icw.icw_flags |= XFS_ICWALK_FLAG_UID;
do_work = true;
}
if (XFS_IS_UQUOTA_ENFORCED(mp) && gdqp && xfs_dquot_lowsp(gdqp)) {
icw.icw_gid = make_kgid(mp->m_super->s_user_ns, gdqp->q_id);
icw.icw_flags |= XFS_ICWALK_FLAG_GID;
do_work = true;
}
if (XFS_IS_PQUOTA_ENFORCED(mp) && pdqp && xfs_dquot_lowsp(pdqp)) {
icw.icw_prid = pdqp->q_id;
icw.icw_flags |= XFS_ICWALK_FLAG_PRID;
do_work = true;
}
if (!do_work)
return 0;
return xfs_blockgc_free_space(mp, &icw);
}
/* Run cow/eofblocks scans on the quotas attached to the inode. */
int
xfs_blockgc_free_quota(
struct xfs_inode *ip,
unsigned int iwalk_flags)
{
return xfs_blockgc_free_dquots(ip->i_mount,
xfs_inode_dquot(ip, XFS_DQTYPE_USER),
xfs_inode_dquot(ip, XFS_DQTYPE_GROUP),
xfs_inode_dquot(ip, XFS_DQTYPE_PROJ), iwalk_flags);
}
/* XFS Inode Cache Walking Code */
/*
* The inode lookup is done in batches to keep the amount of lock traffic and
* radix tree lookups to a minimum. The batch size is a trade off between
* lookup reduction and stack usage. This is in the reclaim path, so we can't
* be too greedy.
*/
#define XFS_LOOKUP_BATCH 32
/*
* Decide if we want to grab this inode in anticipation of doing work towards
* the goal.
*/
static inline bool
xfs_icwalk_igrab(
enum xfs_icwalk_goal goal,
struct xfs_inode *ip,
struct xfs_icwalk *icw)
{
switch (goal) {
case XFS_ICWALK_BLOCKGC:
return xfs_blockgc_igrab(ip);
case XFS_ICWALK_RECLAIM:
return xfs_reclaim_igrab(ip, icw);
default:
return false;
}
}
/*
* Process an inode. Each processing function must handle any state changes
* made by the icwalk igrab function. Return -EAGAIN to skip an inode.
*/
static inline int
xfs_icwalk_process_inode(
enum xfs_icwalk_goal goal,
struct xfs_inode *ip,
struct xfs_perag *pag,
struct xfs_icwalk *icw)
{
int error = 0;
switch (goal) {
case XFS_ICWALK_BLOCKGC:
error = xfs_blockgc_scan_inode(ip, icw);
break;
case XFS_ICWALK_RECLAIM:
xfs_reclaim_inode(ip, pag);
break;
}
return error;
}
/*
* For a given per-AG structure @pag and a goal, grab qualifying inodes and
* process them in some manner.
*/
static int
xfs_icwalk_ag(
struct xfs_perag *pag,
enum xfs_icwalk_goal goal,
struct xfs_icwalk *icw)
{
struct xfs_mount *mp = pag->pag_mount;
uint32_t first_index;
int last_error = 0;
int skipped;
bool done;
int nr_found;
restart:
done = false;
skipped = 0;
if (goal == XFS_ICWALK_RECLAIM)
first_index = READ_ONCE(pag->pag_ici_reclaim_cursor);
else
first_index = 0;
nr_found = 0;
do {
struct xfs_inode *batch[XFS_LOOKUP_BATCH];
int error = 0;
int i;
rcu_read_lock();
nr_found = radix_tree_gang_lookup_tag(&pag->pag_ici_root,
(void **) batch, first_index,
XFS_LOOKUP_BATCH, goal);
if (!nr_found) {
done = true;
rcu_read_unlock();
break;
}
/*
* Grab the inodes before we drop the lock. if we found
* nothing, nr == 0 and the loop will be skipped.
*/
for (i = 0; i < nr_found; i++) {
struct xfs_inode *ip = batch[i];
if (done || !xfs_icwalk_igrab(goal, ip, icw))
batch[i] = NULL;
/*
* Update the index for the next lookup. Catch
* overflows into the next AG range which can occur if
* we have inodes in the last block of the AG and we
* are currently pointing to the last inode.
*
* Because we may see inodes that are from the wrong AG
* due to RCU freeing and reallocation, only update the
* index if it lies in this AG. It was a race that lead
* us to see this inode, so another lookup from the
* same index will not find it again.
*/
if (XFS_INO_TO_AGNO(mp, ip->i_ino) != pag->pag_agno)
continue;
first_index = XFS_INO_TO_AGINO(mp, ip->i_ino + 1);
if (first_index < XFS_INO_TO_AGINO(mp, ip->i_ino))
done = true;
}
/* unlock now we've grabbed the inodes. */
rcu_read_unlock();
for (i = 0; i < nr_found; i++) {
if (!batch[i])
continue;
error = xfs_icwalk_process_inode(goal, batch[i], pag,
icw);
if (error == -EAGAIN) {
skipped++;
continue;
}
if (error && last_error != -EFSCORRUPTED)
last_error = error;
}
/* bail out if the filesystem is corrupted. */
if (error == -EFSCORRUPTED)
break;
cond_resched();
if (icw && (icw->icw_flags & XFS_ICWALK_FLAG_SCAN_LIMIT)) {
icw->icw_scan_limit -= XFS_LOOKUP_BATCH;
if (icw->icw_scan_limit <= 0)
break;
}
} while (nr_found && !done);
if (goal == XFS_ICWALK_RECLAIM) {
if (done)
first_index = 0;
WRITE_ONCE(pag->pag_ici_reclaim_cursor, first_index);
}
if (skipped) {
delay(1);
goto restart;
}
return last_error;
}
/* Walk all incore inodes to achieve a given goal. */
static int
xfs_icwalk(
struct xfs_mount *mp,
enum xfs_icwalk_goal goal,
struct xfs_icwalk *icw)
{
struct xfs_perag *pag;
int error = 0;
int last_error = 0;
xfs_agnumber_t agno;
for_each_perag_tag(mp, agno, pag, goal) {
error = xfs_icwalk_ag(pag, goal, icw);
if (error) {
last_error = error;
if (error == -EFSCORRUPTED) {
xfs: active perag reference counting We need to be able to dynamically remove instantiated AGs from memory safely, either for shrinking the filesystem or paging AG state in and out of memory (e.g. supporting millions of AGs). This means we need to be able to safely exclude operations from accessing perags while dynamic removal is in progress. To do this, introduce the concept of active and passive references. Active references are required for high level operations that make use of an AG for a given operation (e.g. allocation) and pin the perag in memory for the duration of the operation that is operating on the perag (e.g. transaction scope). This means we can fail to get an active reference to an AG, hence callers of the new active reference API must be able to handle lookup failure gracefully. Passive references are used in low level code, where we might need to access the perag structure for the purposes of completing high level operations. For example, buffers need to use passive references because: - we need to be able to do metadata IO during operations like grow and shrink transactions where high level active references to the AG have already been blocked - buffers need to pin the perag until they are reclaimed from memory, something that high level code has no direct control over. - unused cached buffers should not prevent a shrink from being started. Hence we have active references that will form exclusion barriers for operations to be performed on an AG, and passive references that will prevent reclaim of the perag until all objects with passive references have been reclaimed themselves. This patch introduce xfs_perag_grab()/xfs_perag_rele() as the API for active AG reference functionality. We also need to convert the for_each_perag*() iterators to use active references, which will start the process of converting high level code over to using active references. Conversion of non-iterator based code to active references will be done in followup patches. Note that the implementation using reference counting is really just a development vehicle for the API to ensure we don't have any leaks in the callers. Once we need to remove perag structures from memory dyanmically, we will need a much more robust per-ag state transition mechanism for preventing new references from being taken while we wait for existing references to drain before removal from memory can occur.... Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Allison Henderson <allison.henderson@oracle.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org>
2023-02-12 22:14:42 +00:00
xfs_perag_rele(pag);
break;
}
}
}
return last_error;
BUILD_BUG_ON(XFS_ICWALK_PRIVATE_FLAGS & XFS_ICWALK_FLAGS_VALID);
}
#ifdef DEBUG
static void
xfs_check_delalloc(
struct xfs_inode *ip,
int whichfork)
{
struct xfs_ifork *ifp = xfs_ifork_ptr(ip, whichfork);
struct xfs_bmbt_irec got;
struct xfs_iext_cursor icur;
if (!ifp || !xfs_iext_lookup_extent(ip, ifp, 0, &icur, &got))
return;
do {
if (isnullstartblock(got.br_startblock)) {
xfs_warn(ip->i_mount,
"ino %llx %s fork has delalloc extent at [0x%llx:0x%llx]",
ip->i_ino,
whichfork == XFS_DATA_FORK ? "data" : "cow",
got.br_startoff, got.br_blockcount);
}
} while (xfs_iext_next_extent(ifp, &icur, &got));
}
#else
#define xfs_check_delalloc(ip, whichfork) do { } while (0)
#endif
xfs: per-cpu deferred inode inactivation queues Move inode inactivation to background work contexts so that it no longer runs in the context that releases the final reference to an inode. This will allow process work that ends up blocking on inactivation to continue doing work while the filesytem processes the inactivation in the background. A typical demonstration of this is unlinking an inode with lots of extents. The extents are removed during inactivation, so this blocks the process that unlinked the inode from the directory structure. By moving the inactivation to the background process, the userspace applicaiton can keep working (e.g. unlinking the next inode in the directory) while the inactivation work on the previous inode is done by a different CPU. The implementation of the queue is relatively simple. We use a per-cpu lockless linked list (llist) to queue inodes for inactivation without requiring serialisation mechanisms, and a work item to allow the queue to be processed by a CPU bound worker thread. We also keep a count of the queue depth so that we can trigger work after a number of deferred inactivations have been queued. The use of a bound workqueue with a single work depth allows the workqueue to run one work item per CPU. We queue the work item on the CPU we are currently running on, and so this essentially gives us affine per-cpu worker threads for the per-cpu queues. THis maintains the effective CPU affinity that occurs within XFS at the AG level due to all objects in a directory being local to an AG. Hence inactivation work tends to run on the same CPU that last accessed all the objects that inactivation accesses and this maintains hot CPU caches for unlink workloads. A depth of 32 inodes was chosen to match the number of inodes in an inode cluster buffer. This hopefully allows sequential allocation/unlink behaviours to defering inactivation of all the inodes in a single cluster buffer at a time, further helping maintain hot CPU and buffer cache accesses while running inactivations. A hard per-cpu queue throttle of 256 inode has been set to avoid runaway queuing when inodes that take a long to time inactivate are being processed. For example, when unlinking inodes with large numbers of extents that can take a lot of processing to free. Signed-off-by: Dave Chinner <dchinner@redhat.com> [djwong: tweak comments and tracepoints, convert opflags to state bits] Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org>
2021-08-06 18:05:39 +00:00
/* Schedule the inode for reclaim. */
static void
xfs_inodegc_set_reclaimable(
struct xfs_inode *ip)
{
struct xfs_mount *mp = ip->i_mount;
struct xfs_perag *pag;
if (!xfs_is_shutdown(mp) && ip->i_delayed_blks) {
xfs_check_delalloc(ip, XFS_DATA_FORK);
xfs_check_delalloc(ip, XFS_COW_FORK);
ASSERT(0);
}
pag = xfs_perag_get(mp, XFS_INO_TO_AGNO(mp, ip->i_ino));
spin_lock(&pag->pag_ici_lock);
spin_lock(&ip->i_flags_lock);
xfs: per-cpu deferred inode inactivation queues Move inode inactivation to background work contexts so that it no longer runs in the context that releases the final reference to an inode. This will allow process work that ends up blocking on inactivation to continue doing work while the filesytem processes the inactivation in the background. A typical demonstration of this is unlinking an inode with lots of extents. The extents are removed during inactivation, so this blocks the process that unlinked the inode from the directory structure. By moving the inactivation to the background process, the userspace applicaiton can keep working (e.g. unlinking the next inode in the directory) while the inactivation work on the previous inode is done by a different CPU. The implementation of the queue is relatively simple. We use a per-cpu lockless linked list (llist) to queue inodes for inactivation without requiring serialisation mechanisms, and a work item to allow the queue to be processed by a CPU bound worker thread. We also keep a count of the queue depth so that we can trigger work after a number of deferred inactivations have been queued. The use of a bound workqueue with a single work depth allows the workqueue to run one work item per CPU. We queue the work item on the CPU we are currently running on, and so this essentially gives us affine per-cpu worker threads for the per-cpu queues. THis maintains the effective CPU affinity that occurs within XFS at the AG level due to all objects in a directory being local to an AG. Hence inactivation work tends to run on the same CPU that last accessed all the objects that inactivation accesses and this maintains hot CPU caches for unlink workloads. A depth of 32 inodes was chosen to match the number of inodes in an inode cluster buffer. This hopefully allows sequential allocation/unlink behaviours to defering inactivation of all the inodes in a single cluster buffer at a time, further helping maintain hot CPU and buffer cache accesses while running inactivations. A hard per-cpu queue throttle of 256 inode has been set to avoid runaway queuing when inodes that take a long to time inactivate are being processed. For example, when unlinking inodes with large numbers of extents that can take a lot of processing to free. Signed-off-by: Dave Chinner <dchinner@redhat.com> [djwong: tweak comments and tracepoints, convert opflags to state bits] Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org>
2021-08-06 18:05:39 +00:00
trace_xfs_inode_set_reclaimable(ip);
ip->i_flags &= ~(XFS_NEED_INACTIVE | XFS_INACTIVATING);
ip->i_flags |= XFS_IRECLAIMABLE;
xfs_perag_set_inode_tag(pag, XFS_INO_TO_AGINO(mp, ip->i_ino),
XFS_ICI_RECLAIM_TAG);
spin_unlock(&ip->i_flags_lock);
spin_unlock(&pag->pag_ici_lock);
xfs_perag_put(pag);
}
xfs: per-cpu deferred inode inactivation queues Move inode inactivation to background work contexts so that it no longer runs in the context that releases the final reference to an inode. This will allow process work that ends up blocking on inactivation to continue doing work while the filesytem processes the inactivation in the background. A typical demonstration of this is unlinking an inode with lots of extents. The extents are removed during inactivation, so this blocks the process that unlinked the inode from the directory structure. By moving the inactivation to the background process, the userspace applicaiton can keep working (e.g. unlinking the next inode in the directory) while the inactivation work on the previous inode is done by a different CPU. The implementation of the queue is relatively simple. We use a per-cpu lockless linked list (llist) to queue inodes for inactivation without requiring serialisation mechanisms, and a work item to allow the queue to be processed by a CPU bound worker thread. We also keep a count of the queue depth so that we can trigger work after a number of deferred inactivations have been queued. The use of a bound workqueue with a single work depth allows the workqueue to run one work item per CPU. We queue the work item on the CPU we are currently running on, and so this essentially gives us affine per-cpu worker threads for the per-cpu queues. THis maintains the effective CPU affinity that occurs within XFS at the AG level due to all objects in a directory being local to an AG. Hence inactivation work tends to run on the same CPU that last accessed all the objects that inactivation accesses and this maintains hot CPU caches for unlink workloads. A depth of 32 inodes was chosen to match the number of inodes in an inode cluster buffer. This hopefully allows sequential allocation/unlink behaviours to defering inactivation of all the inodes in a single cluster buffer at a time, further helping maintain hot CPU and buffer cache accesses while running inactivations. A hard per-cpu queue throttle of 256 inode has been set to avoid runaway queuing when inodes that take a long to time inactivate are being processed. For example, when unlinking inodes with large numbers of extents that can take a lot of processing to free. Signed-off-by: Dave Chinner <dchinner@redhat.com> [djwong: tweak comments and tracepoints, convert opflags to state bits] Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org>
2021-08-06 18:05:39 +00:00
/*
* Free all speculative preallocations and possibly even the inode itself.
* This is the last chance to make changes to an otherwise unreferenced file
* before incore reclamation happens.
*/
xfs: collect errors from inodegc for unlinked inode recovery Unlinked list recovery requires errors removing the inode the from the unlinked list get fed back to the main recovery loop. Now that we offload the unlinking to the inodegc work, we don't get errors being fed back when we trip over a corruption that prevents the inode from being removed from the unlinked list. This means we never clear the corrupt unlinked list bucket, resulting in runtime operations eventually tripping over it and shutting down. Fix this by collecting inodegc worker errors and feed them back to the flush caller. This is largely best effort - the only context that really cares is log recovery, and it only flushes a single inode at a time so we don't need complex synchronised handling. Essentially the inodegc workers will capture the first error that occurs and the next flush will gather them and clear them. The flush itself will only report the first gathered error. In the cases where callers can return errors, propagate the collected inodegc flush error up the error handling chain. In the case of inode unlinked list recovery, there are several superfluous calls to flush queued unlinked inodes - xlog_recover_iunlink_bucket() guarantees that it has flushed the inodegc and collected errors before it returns. Hence nothing in the calling path needs to run a flush, even when an error is returned. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Dave Chinner <david@fromorbit.com>
2023-06-05 04:48:15 +00:00
static int
xfs: per-cpu deferred inode inactivation queues Move inode inactivation to background work contexts so that it no longer runs in the context that releases the final reference to an inode. This will allow process work that ends up blocking on inactivation to continue doing work while the filesytem processes the inactivation in the background. A typical demonstration of this is unlinking an inode with lots of extents. The extents are removed during inactivation, so this blocks the process that unlinked the inode from the directory structure. By moving the inactivation to the background process, the userspace applicaiton can keep working (e.g. unlinking the next inode in the directory) while the inactivation work on the previous inode is done by a different CPU. The implementation of the queue is relatively simple. We use a per-cpu lockless linked list (llist) to queue inodes for inactivation without requiring serialisation mechanisms, and a work item to allow the queue to be processed by a CPU bound worker thread. We also keep a count of the queue depth so that we can trigger work after a number of deferred inactivations have been queued. The use of a bound workqueue with a single work depth allows the workqueue to run one work item per CPU. We queue the work item on the CPU we are currently running on, and so this essentially gives us affine per-cpu worker threads for the per-cpu queues. THis maintains the effective CPU affinity that occurs within XFS at the AG level due to all objects in a directory being local to an AG. Hence inactivation work tends to run on the same CPU that last accessed all the objects that inactivation accesses and this maintains hot CPU caches for unlink workloads. A depth of 32 inodes was chosen to match the number of inodes in an inode cluster buffer. This hopefully allows sequential allocation/unlink behaviours to defering inactivation of all the inodes in a single cluster buffer at a time, further helping maintain hot CPU and buffer cache accesses while running inactivations. A hard per-cpu queue throttle of 256 inode has been set to avoid runaway queuing when inodes that take a long to time inactivate are being processed. For example, when unlinking inodes with large numbers of extents that can take a lot of processing to free. Signed-off-by: Dave Chinner <dchinner@redhat.com> [djwong: tweak comments and tracepoints, convert opflags to state bits] Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org>
2021-08-06 18:05:39 +00:00
xfs_inodegc_inactivate(
struct xfs_inode *ip)
{
xfs: collect errors from inodegc for unlinked inode recovery Unlinked list recovery requires errors removing the inode the from the unlinked list get fed back to the main recovery loop. Now that we offload the unlinking to the inodegc work, we don't get errors being fed back when we trip over a corruption that prevents the inode from being removed from the unlinked list. This means we never clear the corrupt unlinked list bucket, resulting in runtime operations eventually tripping over it and shutting down. Fix this by collecting inodegc worker errors and feed them back to the flush caller. This is largely best effort - the only context that really cares is log recovery, and it only flushes a single inode at a time so we don't need complex synchronised handling. Essentially the inodegc workers will capture the first error that occurs and the next flush will gather them and clear them. The flush itself will only report the first gathered error. In the cases where callers can return errors, propagate the collected inodegc flush error up the error handling chain. In the case of inode unlinked list recovery, there are several superfluous calls to flush queued unlinked inodes - xlog_recover_iunlink_bucket() guarantees that it has flushed the inodegc and collected errors before it returns. Hence nothing in the calling path needs to run a flush, even when an error is returned. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Dave Chinner <david@fromorbit.com>
2023-06-05 04:48:15 +00:00
int error;
xfs: per-cpu deferred inode inactivation queues Move inode inactivation to background work contexts so that it no longer runs in the context that releases the final reference to an inode. This will allow process work that ends up blocking on inactivation to continue doing work while the filesytem processes the inactivation in the background. A typical demonstration of this is unlinking an inode with lots of extents. The extents are removed during inactivation, so this blocks the process that unlinked the inode from the directory structure. By moving the inactivation to the background process, the userspace applicaiton can keep working (e.g. unlinking the next inode in the directory) while the inactivation work on the previous inode is done by a different CPU. The implementation of the queue is relatively simple. We use a per-cpu lockless linked list (llist) to queue inodes for inactivation without requiring serialisation mechanisms, and a work item to allow the queue to be processed by a CPU bound worker thread. We also keep a count of the queue depth so that we can trigger work after a number of deferred inactivations have been queued. The use of a bound workqueue with a single work depth allows the workqueue to run one work item per CPU. We queue the work item on the CPU we are currently running on, and so this essentially gives us affine per-cpu worker threads for the per-cpu queues. THis maintains the effective CPU affinity that occurs within XFS at the AG level due to all objects in a directory being local to an AG. Hence inactivation work tends to run on the same CPU that last accessed all the objects that inactivation accesses and this maintains hot CPU caches for unlink workloads. A depth of 32 inodes was chosen to match the number of inodes in an inode cluster buffer. This hopefully allows sequential allocation/unlink behaviours to defering inactivation of all the inodes in a single cluster buffer at a time, further helping maintain hot CPU and buffer cache accesses while running inactivations. A hard per-cpu queue throttle of 256 inode has been set to avoid runaway queuing when inodes that take a long to time inactivate are being processed. For example, when unlinking inodes with large numbers of extents that can take a lot of processing to free. Signed-off-by: Dave Chinner <dchinner@redhat.com> [djwong: tweak comments and tracepoints, convert opflags to state bits] Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org>
2021-08-06 18:05:39 +00:00
trace_xfs_inode_inactivating(ip);
xfs: collect errors from inodegc for unlinked inode recovery Unlinked list recovery requires errors removing the inode the from the unlinked list get fed back to the main recovery loop. Now that we offload the unlinking to the inodegc work, we don't get errors being fed back when we trip over a corruption that prevents the inode from being removed from the unlinked list. This means we never clear the corrupt unlinked list bucket, resulting in runtime operations eventually tripping over it and shutting down. Fix this by collecting inodegc worker errors and feed them back to the flush caller. This is largely best effort - the only context that really cares is log recovery, and it only flushes a single inode at a time so we don't need complex synchronised handling. Essentially the inodegc workers will capture the first error that occurs and the next flush will gather them and clear them. The flush itself will only report the first gathered error. In the cases where callers can return errors, propagate the collected inodegc flush error up the error handling chain. In the case of inode unlinked list recovery, there are several superfluous calls to flush queued unlinked inodes - xlog_recover_iunlink_bucket() guarantees that it has flushed the inodegc and collected errors before it returns. Hence nothing in the calling path needs to run a flush, even when an error is returned. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Dave Chinner <david@fromorbit.com>
2023-06-05 04:48:15 +00:00
error = xfs_inactive(ip);
xfs: per-cpu deferred inode inactivation queues Move inode inactivation to background work contexts so that it no longer runs in the context that releases the final reference to an inode. This will allow process work that ends up blocking on inactivation to continue doing work while the filesytem processes the inactivation in the background. A typical demonstration of this is unlinking an inode with lots of extents. The extents are removed during inactivation, so this blocks the process that unlinked the inode from the directory structure. By moving the inactivation to the background process, the userspace applicaiton can keep working (e.g. unlinking the next inode in the directory) while the inactivation work on the previous inode is done by a different CPU. The implementation of the queue is relatively simple. We use a per-cpu lockless linked list (llist) to queue inodes for inactivation without requiring serialisation mechanisms, and a work item to allow the queue to be processed by a CPU bound worker thread. We also keep a count of the queue depth so that we can trigger work after a number of deferred inactivations have been queued. The use of a bound workqueue with a single work depth allows the workqueue to run one work item per CPU. We queue the work item on the CPU we are currently running on, and so this essentially gives us affine per-cpu worker threads for the per-cpu queues. THis maintains the effective CPU affinity that occurs within XFS at the AG level due to all objects in a directory being local to an AG. Hence inactivation work tends to run on the same CPU that last accessed all the objects that inactivation accesses and this maintains hot CPU caches for unlink workloads. A depth of 32 inodes was chosen to match the number of inodes in an inode cluster buffer. This hopefully allows sequential allocation/unlink behaviours to defering inactivation of all the inodes in a single cluster buffer at a time, further helping maintain hot CPU and buffer cache accesses while running inactivations. A hard per-cpu queue throttle of 256 inode has been set to avoid runaway queuing when inodes that take a long to time inactivate are being processed. For example, when unlinking inodes with large numbers of extents that can take a lot of processing to free. Signed-off-by: Dave Chinner <dchinner@redhat.com> [djwong: tweak comments and tracepoints, convert opflags to state bits] Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org>
2021-08-06 18:05:39 +00:00
xfs_inodegc_set_reclaimable(ip);
xfs: collect errors from inodegc for unlinked inode recovery Unlinked list recovery requires errors removing the inode the from the unlinked list get fed back to the main recovery loop. Now that we offload the unlinking to the inodegc work, we don't get errors being fed back when we trip over a corruption that prevents the inode from being removed from the unlinked list. This means we never clear the corrupt unlinked list bucket, resulting in runtime operations eventually tripping over it and shutting down. Fix this by collecting inodegc worker errors and feed them back to the flush caller. This is largely best effort - the only context that really cares is log recovery, and it only flushes a single inode at a time so we don't need complex synchronised handling. Essentially the inodegc workers will capture the first error that occurs and the next flush will gather them and clear them. The flush itself will only report the first gathered error. In the cases where callers can return errors, propagate the collected inodegc flush error up the error handling chain. In the case of inode unlinked list recovery, there are several superfluous calls to flush queued unlinked inodes - xlog_recover_iunlink_bucket() guarantees that it has flushed the inodegc and collected errors before it returns. Hence nothing in the calling path needs to run a flush, even when an error is returned. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Dave Chinner <david@fromorbit.com>
2023-06-05 04:48:15 +00:00
return error;
xfs: per-cpu deferred inode inactivation queues Move inode inactivation to background work contexts so that it no longer runs in the context that releases the final reference to an inode. This will allow process work that ends up blocking on inactivation to continue doing work while the filesytem processes the inactivation in the background. A typical demonstration of this is unlinking an inode with lots of extents. The extents are removed during inactivation, so this blocks the process that unlinked the inode from the directory structure. By moving the inactivation to the background process, the userspace applicaiton can keep working (e.g. unlinking the next inode in the directory) while the inactivation work on the previous inode is done by a different CPU. The implementation of the queue is relatively simple. We use a per-cpu lockless linked list (llist) to queue inodes for inactivation without requiring serialisation mechanisms, and a work item to allow the queue to be processed by a CPU bound worker thread. We also keep a count of the queue depth so that we can trigger work after a number of deferred inactivations have been queued. The use of a bound workqueue with a single work depth allows the workqueue to run one work item per CPU. We queue the work item on the CPU we are currently running on, and so this essentially gives us affine per-cpu worker threads for the per-cpu queues. THis maintains the effective CPU affinity that occurs within XFS at the AG level due to all objects in a directory being local to an AG. Hence inactivation work tends to run on the same CPU that last accessed all the objects that inactivation accesses and this maintains hot CPU caches for unlink workloads. A depth of 32 inodes was chosen to match the number of inodes in an inode cluster buffer. This hopefully allows sequential allocation/unlink behaviours to defering inactivation of all the inodes in a single cluster buffer at a time, further helping maintain hot CPU and buffer cache accesses while running inactivations. A hard per-cpu queue throttle of 256 inode has been set to avoid runaway queuing when inodes that take a long to time inactivate are being processed. For example, when unlinking inodes with large numbers of extents that can take a lot of processing to free. Signed-off-by: Dave Chinner <dchinner@redhat.com> [djwong: tweak comments and tracepoints, convert opflags to state bits] Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org>
2021-08-06 18:05:39 +00:00
}
void
xfs_inodegc_worker(
struct work_struct *work)
{
struct xfs_inodegc *gc = container_of(to_delayed_work(work),
struct xfs_inodegc, work);
xfs: per-cpu deferred inode inactivation queues Move inode inactivation to background work contexts so that it no longer runs in the context that releases the final reference to an inode. This will allow process work that ends up blocking on inactivation to continue doing work while the filesytem processes the inactivation in the background. A typical demonstration of this is unlinking an inode with lots of extents. The extents are removed during inactivation, so this blocks the process that unlinked the inode from the directory structure. By moving the inactivation to the background process, the userspace applicaiton can keep working (e.g. unlinking the next inode in the directory) while the inactivation work on the previous inode is done by a different CPU. The implementation of the queue is relatively simple. We use a per-cpu lockless linked list (llist) to queue inodes for inactivation without requiring serialisation mechanisms, and a work item to allow the queue to be processed by a CPU bound worker thread. We also keep a count of the queue depth so that we can trigger work after a number of deferred inactivations have been queued. The use of a bound workqueue with a single work depth allows the workqueue to run one work item per CPU. We queue the work item on the CPU we are currently running on, and so this essentially gives us affine per-cpu worker threads for the per-cpu queues. THis maintains the effective CPU affinity that occurs within XFS at the AG level due to all objects in a directory being local to an AG. Hence inactivation work tends to run on the same CPU that last accessed all the objects that inactivation accesses and this maintains hot CPU caches for unlink workloads. A depth of 32 inodes was chosen to match the number of inodes in an inode cluster buffer. This hopefully allows sequential allocation/unlink behaviours to defering inactivation of all the inodes in a single cluster buffer at a time, further helping maintain hot CPU and buffer cache accesses while running inactivations. A hard per-cpu queue throttle of 256 inode has been set to avoid runaway queuing when inodes that take a long to time inactivate are being processed. For example, when unlinking inodes with large numbers of extents that can take a lot of processing to free. Signed-off-by: Dave Chinner <dchinner@redhat.com> [djwong: tweak comments and tracepoints, convert opflags to state bits] Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org>
2021-08-06 18:05:39 +00:00
struct llist_node *node = llist_del_all(&gc->list);
struct xfs_inode *ip, *n;
struct xfs_mount *mp = gc->mp;
xfs: Fix deadlock on xfs_inodegc_worker We are doing a test about deleting a large number of files when memory is low. A deadlock problem was found. [ 1240.279183] -> #1 (fs_reclaim){+.+.}-{0:0}: [ 1240.280450] lock_acquire+0x197/0x460 [ 1240.281548] fs_reclaim_acquire.part.0+0x20/0x30 [ 1240.282625] kmem_cache_alloc+0x2b/0x940 [ 1240.283816] xfs_trans_alloc+0x8a/0x8b0 [ 1240.284757] xfs_inactive_ifree+0xe4/0x4e0 [ 1240.285935] xfs_inactive+0x4e9/0x8a0 [ 1240.286836] xfs_inodegc_worker+0x160/0x5e0 [ 1240.287969] process_one_work+0xa19/0x16b0 [ 1240.289030] worker_thread+0x9e/0x1050 [ 1240.290131] kthread+0x34f/0x460 [ 1240.290999] ret_from_fork+0x22/0x30 [ 1240.291905] [ 1240.291905] -> #0 ((work_completion)(&gc->work)){+.+.}-{0:0}: [ 1240.293569] check_prev_add+0x160/0x2490 [ 1240.294473] __lock_acquire+0x2c4d/0x5160 [ 1240.295544] lock_acquire+0x197/0x460 [ 1240.296403] __flush_work+0x6bc/0xa20 [ 1240.297522] xfs_inode_mark_reclaimable+0x6f0/0xdc0 [ 1240.298649] destroy_inode+0xc6/0x1b0 [ 1240.299677] dispose_list+0xe1/0x1d0 [ 1240.300567] prune_icache_sb+0xec/0x150 [ 1240.301794] super_cache_scan+0x2c9/0x480 [ 1240.302776] do_shrink_slab+0x3f0/0xaa0 [ 1240.303671] shrink_slab+0x170/0x660 [ 1240.304601] shrink_node+0x7f7/0x1df0 [ 1240.305515] balance_pgdat+0x766/0xf50 [ 1240.306657] kswapd+0x5bd/0xd20 [ 1240.307551] kthread+0x34f/0x460 [ 1240.308346] ret_from_fork+0x22/0x30 [ 1240.309247] [ 1240.309247] other info that might help us debug this: [ 1240.309247] [ 1240.310944] Possible unsafe locking scenario: [ 1240.310944] [ 1240.312379] CPU0 CPU1 [ 1240.313363] ---- ---- [ 1240.314433] lock(fs_reclaim); [ 1240.315107] lock((work_completion)(&gc->work)); [ 1240.316828] lock(fs_reclaim); [ 1240.318088] lock((work_completion)(&gc->work)); [ 1240.319203] [ 1240.319203] *** DEADLOCK *** ... [ 2438.431081] Workqueue: xfs-inodegc/sda xfs_inodegc_worker [ 2438.432089] Call Trace: [ 2438.432562] __schedule+0xa94/0x1d20 [ 2438.435787] schedule+0xbf/0x270 [ 2438.436397] schedule_timeout+0x6f8/0x8b0 [ 2438.445126] wait_for_completion+0x163/0x260 [ 2438.448610] __flush_work+0x4c4/0xa40 [ 2438.455011] xfs_inode_mark_reclaimable+0x6ef/0xda0 [ 2438.456695] destroy_inode+0xc6/0x1b0 [ 2438.457375] dispose_list+0xe1/0x1d0 [ 2438.458834] prune_icache_sb+0xe8/0x150 [ 2438.461181] super_cache_scan+0x2b3/0x470 [ 2438.461950] do_shrink_slab+0x3cf/0xa50 [ 2438.462687] shrink_slab+0x17d/0x660 [ 2438.466392] shrink_node+0x87e/0x1d40 [ 2438.467894] do_try_to_free_pages+0x364/0x1300 [ 2438.471188] try_to_free_pages+0x26c/0x5b0 [ 2438.473567] __alloc_pages_slowpath.constprop.136+0x7aa/0x2100 [ 2438.482577] __alloc_pages+0x5db/0x710 [ 2438.485231] alloc_pages+0x100/0x200 [ 2438.485923] allocate_slab+0x2c0/0x380 [ 2438.486623] ___slab_alloc+0x41f/0x690 [ 2438.490254] __slab_alloc+0x54/0x70 [ 2438.491692] kmem_cache_alloc+0x23e/0x270 [ 2438.492437] xfs_trans_alloc+0x88/0x880 [ 2438.493168] xfs_inactive_ifree+0xe2/0x4e0 [ 2438.496419] xfs_inactive+0x4eb/0x8b0 [ 2438.497123] xfs_inodegc_worker+0x16b/0x5e0 [ 2438.497918] process_one_work+0xbf7/0x1a20 [ 2438.500316] worker_thread+0x8c/0x1060 [ 2438.504938] ret_from_fork+0x22/0x30 When the memory is insufficient, xfs_inonodegc_worker will trigger memory reclamation when memory is allocated, then flush_work() may be called to wait for the work to complete. This causes a deadlock. So use memalloc_nofs_save() to avoid triggering memory reclamation in xfs_inodegc_worker. Signed-off-by: Wu Guanghao <wuguanghao3@huawei.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org>
2022-12-27 17:41:30 +00:00
unsigned int nofs_flag;
xfs: per-cpu deferred inode inactivation queues Move inode inactivation to background work contexts so that it no longer runs in the context that releases the final reference to an inode. This will allow process work that ends up blocking on inactivation to continue doing work while the filesytem processes the inactivation in the background. A typical demonstration of this is unlinking an inode with lots of extents. The extents are removed during inactivation, so this blocks the process that unlinked the inode from the directory structure. By moving the inactivation to the background process, the userspace applicaiton can keep working (e.g. unlinking the next inode in the directory) while the inactivation work on the previous inode is done by a different CPU. The implementation of the queue is relatively simple. We use a per-cpu lockless linked list (llist) to queue inodes for inactivation without requiring serialisation mechanisms, and a work item to allow the queue to be processed by a CPU bound worker thread. We also keep a count of the queue depth so that we can trigger work after a number of deferred inactivations have been queued. The use of a bound workqueue with a single work depth allows the workqueue to run one work item per CPU. We queue the work item on the CPU we are currently running on, and so this essentially gives us affine per-cpu worker threads for the per-cpu queues. THis maintains the effective CPU affinity that occurs within XFS at the AG level due to all objects in a directory being local to an AG. Hence inactivation work tends to run on the same CPU that last accessed all the objects that inactivation accesses and this maintains hot CPU caches for unlink workloads. A depth of 32 inodes was chosen to match the number of inodes in an inode cluster buffer. This hopefully allows sequential allocation/unlink behaviours to defering inactivation of all the inodes in a single cluster buffer at a time, further helping maintain hot CPU and buffer cache accesses while running inactivations. A hard per-cpu queue throttle of 256 inode has been set to avoid runaway queuing when inodes that take a long to time inactivate are being processed. For example, when unlinking inodes with large numbers of extents that can take a lot of processing to free. Signed-off-by: Dave Chinner <dchinner@redhat.com> [djwong: tweak comments and tracepoints, convert opflags to state bits] Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org>
2021-08-06 18:05:39 +00:00
/*
* Clear the cpu mask bit and ensure that we have seen the latest
* update of the gc structure associated with this CPU. This matches
* with the release semantics used when setting the cpumask bit in
* xfs_inodegc_queue.
*/
cpumask_clear_cpu(gc->cpu, &mp->m_inodegc_cpumask);
smp_mb__after_atomic();
xfs: per-cpu deferred inode inactivation queues Move inode inactivation to background work contexts so that it no longer runs in the context that releases the final reference to an inode. This will allow process work that ends up blocking on inactivation to continue doing work while the filesytem processes the inactivation in the background. A typical demonstration of this is unlinking an inode with lots of extents. The extents are removed during inactivation, so this blocks the process that unlinked the inode from the directory structure. By moving the inactivation to the background process, the userspace applicaiton can keep working (e.g. unlinking the next inode in the directory) while the inactivation work on the previous inode is done by a different CPU. The implementation of the queue is relatively simple. We use a per-cpu lockless linked list (llist) to queue inodes for inactivation without requiring serialisation mechanisms, and a work item to allow the queue to be processed by a CPU bound worker thread. We also keep a count of the queue depth so that we can trigger work after a number of deferred inactivations have been queued. The use of a bound workqueue with a single work depth allows the workqueue to run one work item per CPU. We queue the work item on the CPU we are currently running on, and so this essentially gives us affine per-cpu worker threads for the per-cpu queues. THis maintains the effective CPU affinity that occurs within XFS at the AG level due to all objects in a directory being local to an AG. Hence inactivation work tends to run on the same CPU that last accessed all the objects that inactivation accesses and this maintains hot CPU caches for unlink workloads. A depth of 32 inodes was chosen to match the number of inodes in an inode cluster buffer. This hopefully allows sequential allocation/unlink behaviours to defering inactivation of all the inodes in a single cluster buffer at a time, further helping maintain hot CPU and buffer cache accesses while running inactivations. A hard per-cpu queue throttle of 256 inode has been set to avoid runaway queuing when inodes that take a long to time inactivate are being processed. For example, when unlinking inodes with large numbers of extents that can take a lot of processing to free. Signed-off-by: Dave Chinner <dchinner@redhat.com> [djwong: tweak comments and tracepoints, convert opflags to state bits] Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org>
2021-08-06 18:05:39 +00:00
WRITE_ONCE(gc->items, 0);
if (!node)
return;
xfs: Fix deadlock on xfs_inodegc_worker We are doing a test about deleting a large number of files when memory is low. A deadlock problem was found. [ 1240.279183] -> #1 (fs_reclaim){+.+.}-{0:0}: [ 1240.280450] lock_acquire+0x197/0x460 [ 1240.281548] fs_reclaim_acquire.part.0+0x20/0x30 [ 1240.282625] kmem_cache_alloc+0x2b/0x940 [ 1240.283816] xfs_trans_alloc+0x8a/0x8b0 [ 1240.284757] xfs_inactive_ifree+0xe4/0x4e0 [ 1240.285935] xfs_inactive+0x4e9/0x8a0 [ 1240.286836] xfs_inodegc_worker+0x160/0x5e0 [ 1240.287969] process_one_work+0xa19/0x16b0 [ 1240.289030] worker_thread+0x9e/0x1050 [ 1240.290131] kthread+0x34f/0x460 [ 1240.290999] ret_from_fork+0x22/0x30 [ 1240.291905] [ 1240.291905] -> #0 ((work_completion)(&gc->work)){+.+.}-{0:0}: [ 1240.293569] check_prev_add+0x160/0x2490 [ 1240.294473] __lock_acquire+0x2c4d/0x5160 [ 1240.295544] lock_acquire+0x197/0x460 [ 1240.296403] __flush_work+0x6bc/0xa20 [ 1240.297522] xfs_inode_mark_reclaimable+0x6f0/0xdc0 [ 1240.298649] destroy_inode+0xc6/0x1b0 [ 1240.299677] dispose_list+0xe1/0x1d0 [ 1240.300567] prune_icache_sb+0xec/0x150 [ 1240.301794] super_cache_scan+0x2c9/0x480 [ 1240.302776] do_shrink_slab+0x3f0/0xaa0 [ 1240.303671] shrink_slab+0x170/0x660 [ 1240.304601] shrink_node+0x7f7/0x1df0 [ 1240.305515] balance_pgdat+0x766/0xf50 [ 1240.306657] kswapd+0x5bd/0xd20 [ 1240.307551] kthread+0x34f/0x460 [ 1240.308346] ret_from_fork+0x22/0x30 [ 1240.309247] [ 1240.309247] other info that might help us debug this: [ 1240.309247] [ 1240.310944] Possible unsafe locking scenario: [ 1240.310944] [ 1240.312379] CPU0 CPU1 [ 1240.313363] ---- ---- [ 1240.314433] lock(fs_reclaim); [ 1240.315107] lock((work_completion)(&gc->work)); [ 1240.316828] lock(fs_reclaim); [ 1240.318088] lock((work_completion)(&gc->work)); [ 1240.319203] [ 1240.319203] *** DEADLOCK *** ... [ 2438.431081] Workqueue: xfs-inodegc/sda xfs_inodegc_worker [ 2438.432089] Call Trace: [ 2438.432562] __schedule+0xa94/0x1d20 [ 2438.435787] schedule+0xbf/0x270 [ 2438.436397] schedule_timeout+0x6f8/0x8b0 [ 2438.445126] wait_for_completion+0x163/0x260 [ 2438.448610] __flush_work+0x4c4/0xa40 [ 2438.455011] xfs_inode_mark_reclaimable+0x6ef/0xda0 [ 2438.456695] destroy_inode+0xc6/0x1b0 [ 2438.457375] dispose_list+0xe1/0x1d0 [ 2438.458834] prune_icache_sb+0xe8/0x150 [ 2438.461181] super_cache_scan+0x2b3/0x470 [ 2438.461950] do_shrink_slab+0x3cf/0xa50 [ 2438.462687] shrink_slab+0x17d/0x660 [ 2438.466392] shrink_node+0x87e/0x1d40 [ 2438.467894] do_try_to_free_pages+0x364/0x1300 [ 2438.471188] try_to_free_pages+0x26c/0x5b0 [ 2438.473567] __alloc_pages_slowpath.constprop.136+0x7aa/0x2100 [ 2438.482577] __alloc_pages+0x5db/0x710 [ 2438.485231] alloc_pages+0x100/0x200 [ 2438.485923] allocate_slab+0x2c0/0x380 [ 2438.486623] ___slab_alloc+0x41f/0x690 [ 2438.490254] __slab_alloc+0x54/0x70 [ 2438.491692] kmem_cache_alloc+0x23e/0x270 [ 2438.492437] xfs_trans_alloc+0x88/0x880 [ 2438.493168] xfs_inactive_ifree+0xe2/0x4e0 [ 2438.496419] xfs_inactive+0x4eb/0x8b0 [ 2438.497123] xfs_inodegc_worker+0x16b/0x5e0 [ 2438.497918] process_one_work+0xbf7/0x1a20 [ 2438.500316] worker_thread+0x8c/0x1060 [ 2438.504938] ret_from_fork+0x22/0x30 When the memory is insufficient, xfs_inonodegc_worker will trigger memory reclamation when memory is allocated, then flush_work() may be called to wait for the work to complete. This causes a deadlock. So use memalloc_nofs_save() to avoid triggering memory reclamation in xfs_inodegc_worker. Signed-off-by: Wu Guanghao <wuguanghao3@huawei.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org>
2022-12-27 17:41:30 +00:00
/*
* We can allocate memory here while doing writeback on behalf of
* memory reclaim. To avoid memory allocation deadlocks set the
* task-wide nofs context for the following operations.
*/
nofs_flag = memalloc_nofs_save();
xfs: per-cpu deferred inode inactivation queues Move inode inactivation to background work contexts so that it no longer runs in the context that releases the final reference to an inode. This will allow process work that ends up blocking on inactivation to continue doing work while the filesytem processes the inactivation in the background. A typical demonstration of this is unlinking an inode with lots of extents. The extents are removed during inactivation, so this blocks the process that unlinked the inode from the directory structure. By moving the inactivation to the background process, the userspace applicaiton can keep working (e.g. unlinking the next inode in the directory) while the inactivation work on the previous inode is done by a different CPU. The implementation of the queue is relatively simple. We use a per-cpu lockless linked list (llist) to queue inodes for inactivation without requiring serialisation mechanisms, and a work item to allow the queue to be processed by a CPU bound worker thread. We also keep a count of the queue depth so that we can trigger work after a number of deferred inactivations have been queued. The use of a bound workqueue with a single work depth allows the workqueue to run one work item per CPU. We queue the work item on the CPU we are currently running on, and so this essentially gives us affine per-cpu worker threads for the per-cpu queues. THis maintains the effective CPU affinity that occurs within XFS at the AG level due to all objects in a directory being local to an AG. Hence inactivation work tends to run on the same CPU that last accessed all the objects that inactivation accesses and this maintains hot CPU caches for unlink workloads. A depth of 32 inodes was chosen to match the number of inodes in an inode cluster buffer. This hopefully allows sequential allocation/unlink behaviours to defering inactivation of all the inodes in a single cluster buffer at a time, further helping maintain hot CPU and buffer cache accesses while running inactivations. A hard per-cpu queue throttle of 256 inode has been set to avoid runaway queuing when inodes that take a long to time inactivate are being processed. For example, when unlinking inodes with large numbers of extents that can take a lot of processing to free. Signed-off-by: Dave Chinner <dchinner@redhat.com> [djwong: tweak comments and tracepoints, convert opflags to state bits] Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org>
2021-08-06 18:05:39 +00:00
ip = llist_entry(node, struct xfs_inode, i_gclist);
trace_xfs_inodegc_worker(mp, READ_ONCE(gc->shrinker_hits));
xfs: per-cpu deferred inode inactivation queues Move inode inactivation to background work contexts so that it no longer runs in the context that releases the final reference to an inode. This will allow process work that ends up blocking on inactivation to continue doing work while the filesytem processes the inactivation in the background. A typical demonstration of this is unlinking an inode with lots of extents. The extents are removed during inactivation, so this blocks the process that unlinked the inode from the directory structure. By moving the inactivation to the background process, the userspace applicaiton can keep working (e.g. unlinking the next inode in the directory) while the inactivation work on the previous inode is done by a different CPU. The implementation of the queue is relatively simple. We use a per-cpu lockless linked list (llist) to queue inodes for inactivation without requiring serialisation mechanisms, and a work item to allow the queue to be processed by a CPU bound worker thread. We also keep a count of the queue depth so that we can trigger work after a number of deferred inactivations have been queued. The use of a bound workqueue with a single work depth allows the workqueue to run one work item per CPU. We queue the work item on the CPU we are currently running on, and so this essentially gives us affine per-cpu worker threads for the per-cpu queues. THis maintains the effective CPU affinity that occurs within XFS at the AG level due to all objects in a directory being local to an AG. Hence inactivation work tends to run on the same CPU that last accessed all the objects that inactivation accesses and this maintains hot CPU caches for unlink workloads. A depth of 32 inodes was chosen to match the number of inodes in an inode cluster buffer. This hopefully allows sequential allocation/unlink behaviours to defering inactivation of all the inodes in a single cluster buffer at a time, further helping maintain hot CPU and buffer cache accesses while running inactivations. A hard per-cpu queue throttle of 256 inode has been set to avoid runaway queuing when inodes that take a long to time inactivate are being processed. For example, when unlinking inodes with large numbers of extents that can take a lot of processing to free. Signed-off-by: Dave Chinner <dchinner@redhat.com> [djwong: tweak comments and tracepoints, convert opflags to state bits] Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org>
2021-08-06 18:05:39 +00:00
WRITE_ONCE(gc->shrinker_hits, 0);
xfs: per-cpu deferred inode inactivation queues Move inode inactivation to background work contexts so that it no longer runs in the context that releases the final reference to an inode. This will allow process work that ends up blocking on inactivation to continue doing work while the filesytem processes the inactivation in the background. A typical demonstration of this is unlinking an inode with lots of extents. The extents are removed during inactivation, so this blocks the process that unlinked the inode from the directory structure. By moving the inactivation to the background process, the userspace applicaiton can keep working (e.g. unlinking the next inode in the directory) while the inactivation work on the previous inode is done by a different CPU. The implementation of the queue is relatively simple. We use a per-cpu lockless linked list (llist) to queue inodes for inactivation without requiring serialisation mechanisms, and a work item to allow the queue to be processed by a CPU bound worker thread. We also keep a count of the queue depth so that we can trigger work after a number of deferred inactivations have been queued. The use of a bound workqueue with a single work depth allows the workqueue to run one work item per CPU. We queue the work item on the CPU we are currently running on, and so this essentially gives us affine per-cpu worker threads for the per-cpu queues. THis maintains the effective CPU affinity that occurs within XFS at the AG level due to all objects in a directory being local to an AG. Hence inactivation work tends to run on the same CPU that last accessed all the objects that inactivation accesses and this maintains hot CPU caches for unlink workloads. A depth of 32 inodes was chosen to match the number of inodes in an inode cluster buffer. This hopefully allows sequential allocation/unlink behaviours to defering inactivation of all the inodes in a single cluster buffer at a time, further helping maintain hot CPU and buffer cache accesses while running inactivations. A hard per-cpu queue throttle of 256 inode has been set to avoid runaway queuing when inodes that take a long to time inactivate are being processed. For example, when unlinking inodes with large numbers of extents that can take a lot of processing to free. Signed-off-by: Dave Chinner <dchinner@redhat.com> [djwong: tweak comments and tracepoints, convert opflags to state bits] Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org>
2021-08-06 18:05:39 +00:00
llist_for_each_entry_safe(ip, n, node, i_gclist) {
xfs: collect errors from inodegc for unlinked inode recovery Unlinked list recovery requires errors removing the inode the from the unlinked list get fed back to the main recovery loop. Now that we offload the unlinking to the inodegc work, we don't get errors being fed back when we trip over a corruption that prevents the inode from being removed from the unlinked list. This means we never clear the corrupt unlinked list bucket, resulting in runtime operations eventually tripping over it and shutting down. Fix this by collecting inodegc worker errors and feed them back to the flush caller. This is largely best effort - the only context that really cares is log recovery, and it only flushes a single inode at a time so we don't need complex synchronised handling. Essentially the inodegc workers will capture the first error that occurs and the next flush will gather them and clear them. The flush itself will only report the first gathered error. In the cases where callers can return errors, propagate the collected inodegc flush error up the error handling chain. In the case of inode unlinked list recovery, there are several superfluous calls to flush queued unlinked inodes - xlog_recover_iunlink_bucket() guarantees that it has flushed the inodegc and collected errors before it returns. Hence nothing in the calling path needs to run a flush, even when an error is returned. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Dave Chinner <david@fromorbit.com>
2023-06-05 04:48:15 +00:00
int error;
xfs: per-cpu deferred inode inactivation queues Move inode inactivation to background work contexts so that it no longer runs in the context that releases the final reference to an inode. This will allow process work that ends up blocking on inactivation to continue doing work while the filesytem processes the inactivation in the background. A typical demonstration of this is unlinking an inode with lots of extents. The extents are removed during inactivation, so this blocks the process that unlinked the inode from the directory structure. By moving the inactivation to the background process, the userspace applicaiton can keep working (e.g. unlinking the next inode in the directory) while the inactivation work on the previous inode is done by a different CPU. The implementation of the queue is relatively simple. We use a per-cpu lockless linked list (llist) to queue inodes for inactivation without requiring serialisation mechanisms, and a work item to allow the queue to be processed by a CPU bound worker thread. We also keep a count of the queue depth so that we can trigger work after a number of deferred inactivations have been queued. The use of a bound workqueue with a single work depth allows the workqueue to run one work item per CPU. We queue the work item on the CPU we are currently running on, and so this essentially gives us affine per-cpu worker threads for the per-cpu queues. THis maintains the effective CPU affinity that occurs within XFS at the AG level due to all objects in a directory being local to an AG. Hence inactivation work tends to run on the same CPU that last accessed all the objects that inactivation accesses and this maintains hot CPU caches for unlink workloads. A depth of 32 inodes was chosen to match the number of inodes in an inode cluster buffer. This hopefully allows sequential allocation/unlink behaviours to defering inactivation of all the inodes in a single cluster buffer at a time, further helping maintain hot CPU and buffer cache accesses while running inactivations. A hard per-cpu queue throttle of 256 inode has been set to avoid runaway queuing when inodes that take a long to time inactivate are being processed. For example, when unlinking inodes with large numbers of extents that can take a lot of processing to free. Signed-off-by: Dave Chinner <dchinner@redhat.com> [djwong: tweak comments and tracepoints, convert opflags to state bits] Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org>
2021-08-06 18:05:39 +00:00
xfs_iflags_set(ip, XFS_INACTIVATING);
xfs: collect errors from inodegc for unlinked inode recovery Unlinked list recovery requires errors removing the inode the from the unlinked list get fed back to the main recovery loop. Now that we offload the unlinking to the inodegc work, we don't get errors being fed back when we trip over a corruption that prevents the inode from being removed from the unlinked list. This means we never clear the corrupt unlinked list bucket, resulting in runtime operations eventually tripping over it and shutting down. Fix this by collecting inodegc worker errors and feed them back to the flush caller. This is largely best effort - the only context that really cares is log recovery, and it only flushes a single inode at a time so we don't need complex synchronised handling. Essentially the inodegc workers will capture the first error that occurs and the next flush will gather them and clear them. The flush itself will only report the first gathered error. In the cases where callers can return errors, propagate the collected inodegc flush error up the error handling chain. In the case of inode unlinked list recovery, there are several superfluous calls to flush queued unlinked inodes - xlog_recover_iunlink_bucket() guarantees that it has flushed the inodegc and collected errors before it returns. Hence nothing in the calling path needs to run a flush, even when an error is returned. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Dave Chinner <david@fromorbit.com>
2023-06-05 04:48:15 +00:00
error = xfs_inodegc_inactivate(ip);
if (error && !gc->error)
gc->error = error;
xfs: per-cpu deferred inode inactivation queues Move inode inactivation to background work contexts so that it no longer runs in the context that releases the final reference to an inode. This will allow process work that ends up blocking on inactivation to continue doing work while the filesytem processes the inactivation in the background. A typical demonstration of this is unlinking an inode with lots of extents. The extents are removed during inactivation, so this blocks the process that unlinked the inode from the directory structure. By moving the inactivation to the background process, the userspace applicaiton can keep working (e.g. unlinking the next inode in the directory) while the inactivation work on the previous inode is done by a different CPU. The implementation of the queue is relatively simple. We use a per-cpu lockless linked list (llist) to queue inodes for inactivation without requiring serialisation mechanisms, and a work item to allow the queue to be processed by a CPU bound worker thread. We also keep a count of the queue depth so that we can trigger work after a number of deferred inactivations have been queued. The use of a bound workqueue with a single work depth allows the workqueue to run one work item per CPU. We queue the work item on the CPU we are currently running on, and so this essentially gives us affine per-cpu worker threads for the per-cpu queues. THis maintains the effective CPU affinity that occurs within XFS at the AG level due to all objects in a directory being local to an AG. Hence inactivation work tends to run on the same CPU that last accessed all the objects that inactivation accesses and this maintains hot CPU caches for unlink workloads. A depth of 32 inodes was chosen to match the number of inodes in an inode cluster buffer. This hopefully allows sequential allocation/unlink behaviours to defering inactivation of all the inodes in a single cluster buffer at a time, further helping maintain hot CPU and buffer cache accesses while running inactivations. A hard per-cpu queue throttle of 256 inode has been set to avoid runaway queuing when inodes that take a long to time inactivate are being processed. For example, when unlinking inodes with large numbers of extents that can take a lot of processing to free. Signed-off-by: Dave Chinner <dchinner@redhat.com> [djwong: tweak comments and tracepoints, convert opflags to state bits] Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org>
2021-08-06 18:05:39 +00:00
}
xfs: Fix deadlock on xfs_inodegc_worker We are doing a test about deleting a large number of files when memory is low. A deadlock problem was found. [ 1240.279183] -> #1 (fs_reclaim){+.+.}-{0:0}: [ 1240.280450] lock_acquire+0x197/0x460 [ 1240.281548] fs_reclaim_acquire.part.0+0x20/0x30 [ 1240.282625] kmem_cache_alloc+0x2b/0x940 [ 1240.283816] xfs_trans_alloc+0x8a/0x8b0 [ 1240.284757] xfs_inactive_ifree+0xe4/0x4e0 [ 1240.285935] xfs_inactive+0x4e9/0x8a0 [ 1240.286836] xfs_inodegc_worker+0x160/0x5e0 [ 1240.287969] process_one_work+0xa19/0x16b0 [ 1240.289030] worker_thread+0x9e/0x1050 [ 1240.290131] kthread+0x34f/0x460 [ 1240.290999] ret_from_fork+0x22/0x30 [ 1240.291905] [ 1240.291905] -> #0 ((work_completion)(&gc->work)){+.+.}-{0:0}: [ 1240.293569] check_prev_add+0x160/0x2490 [ 1240.294473] __lock_acquire+0x2c4d/0x5160 [ 1240.295544] lock_acquire+0x197/0x460 [ 1240.296403] __flush_work+0x6bc/0xa20 [ 1240.297522] xfs_inode_mark_reclaimable+0x6f0/0xdc0 [ 1240.298649] destroy_inode+0xc6/0x1b0 [ 1240.299677] dispose_list+0xe1/0x1d0 [ 1240.300567] prune_icache_sb+0xec/0x150 [ 1240.301794] super_cache_scan+0x2c9/0x480 [ 1240.302776] do_shrink_slab+0x3f0/0xaa0 [ 1240.303671] shrink_slab+0x170/0x660 [ 1240.304601] shrink_node+0x7f7/0x1df0 [ 1240.305515] balance_pgdat+0x766/0xf50 [ 1240.306657] kswapd+0x5bd/0xd20 [ 1240.307551] kthread+0x34f/0x460 [ 1240.308346] ret_from_fork+0x22/0x30 [ 1240.309247] [ 1240.309247] other info that might help us debug this: [ 1240.309247] [ 1240.310944] Possible unsafe locking scenario: [ 1240.310944] [ 1240.312379] CPU0 CPU1 [ 1240.313363] ---- ---- [ 1240.314433] lock(fs_reclaim); [ 1240.315107] lock((work_completion)(&gc->work)); [ 1240.316828] lock(fs_reclaim); [ 1240.318088] lock((work_completion)(&gc->work)); [ 1240.319203] [ 1240.319203] *** DEADLOCK *** ... [ 2438.431081] Workqueue: xfs-inodegc/sda xfs_inodegc_worker [ 2438.432089] Call Trace: [ 2438.432562] __schedule+0xa94/0x1d20 [ 2438.435787] schedule+0xbf/0x270 [ 2438.436397] schedule_timeout+0x6f8/0x8b0 [ 2438.445126] wait_for_completion+0x163/0x260 [ 2438.448610] __flush_work+0x4c4/0xa40 [ 2438.455011] xfs_inode_mark_reclaimable+0x6ef/0xda0 [ 2438.456695] destroy_inode+0xc6/0x1b0 [ 2438.457375] dispose_list+0xe1/0x1d0 [ 2438.458834] prune_icache_sb+0xe8/0x150 [ 2438.461181] super_cache_scan+0x2b3/0x470 [ 2438.461950] do_shrink_slab+0x3cf/0xa50 [ 2438.462687] shrink_slab+0x17d/0x660 [ 2438.466392] shrink_node+0x87e/0x1d40 [ 2438.467894] do_try_to_free_pages+0x364/0x1300 [ 2438.471188] try_to_free_pages+0x26c/0x5b0 [ 2438.473567] __alloc_pages_slowpath.constprop.136+0x7aa/0x2100 [ 2438.482577] __alloc_pages+0x5db/0x710 [ 2438.485231] alloc_pages+0x100/0x200 [ 2438.485923] allocate_slab+0x2c0/0x380 [ 2438.486623] ___slab_alloc+0x41f/0x690 [ 2438.490254] __slab_alloc+0x54/0x70 [ 2438.491692] kmem_cache_alloc+0x23e/0x270 [ 2438.492437] xfs_trans_alloc+0x88/0x880 [ 2438.493168] xfs_inactive_ifree+0xe2/0x4e0 [ 2438.496419] xfs_inactive+0x4eb/0x8b0 [ 2438.497123] xfs_inodegc_worker+0x16b/0x5e0 [ 2438.497918] process_one_work+0xbf7/0x1a20 [ 2438.500316] worker_thread+0x8c/0x1060 [ 2438.504938] ret_from_fork+0x22/0x30 When the memory is insufficient, xfs_inonodegc_worker will trigger memory reclamation when memory is allocated, then flush_work() may be called to wait for the work to complete. This causes a deadlock. So use memalloc_nofs_save() to avoid triggering memory reclamation in xfs_inodegc_worker. Signed-off-by: Wu Guanghao <wuguanghao3@huawei.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org>
2022-12-27 17:41:30 +00:00
memalloc_nofs_restore(nofs_flag);
xfs: per-cpu deferred inode inactivation queues Move inode inactivation to background work contexts so that it no longer runs in the context that releases the final reference to an inode. This will allow process work that ends up blocking on inactivation to continue doing work while the filesytem processes the inactivation in the background. A typical demonstration of this is unlinking an inode with lots of extents. The extents are removed during inactivation, so this blocks the process that unlinked the inode from the directory structure. By moving the inactivation to the background process, the userspace applicaiton can keep working (e.g. unlinking the next inode in the directory) while the inactivation work on the previous inode is done by a different CPU. The implementation of the queue is relatively simple. We use a per-cpu lockless linked list (llist) to queue inodes for inactivation without requiring serialisation mechanisms, and a work item to allow the queue to be processed by a CPU bound worker thread. We also keep a count of the queue depth so that we can trigger work after a number of deferred inactivations have been queued. The use of a bound workqueue with a single work depth allows the workqueue to run one work item per CPU. We queue the work item on the CPU we are currently running on, and so this essentially gives us affine per-cpu worker threads for the per-cpu queues. THis maintains the effective CPU affinity that occurs within XFS at the AG level due to all objects in a directory being local to an AG. Hence inactivation work tends to run on the same CPU that last accessed all the objects that inactivation accesses and this maintains hot CPU caches for unlink workloads. A depth of 32 inodes was chosen to match the number of inodes in an inode cluster buffer. This hopefully allows sequential allocation/unlink behaviours to defering inactivation of all the inodes in a single cluster buffer at a time, further helping maintain hot CPU and buffer cache accesses while running inactivations. A hard per-cpu queue throttle of 256 inode has been set to avoid runaway queuing when inodes that take a long to time inactivate are being processed. For example, when unlinking inodes with large numbers of extents that can take a lot of processing to free. Signed-off-by: Dave Chinner <dchinner@redhat.com> [djwong: tweak comments and tracepoints, convert opflags to state bits] Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org>
2021-08-06 18:05:39 +00:00
}
/*
* Expedite all pending inodegc work to run immediately. This does not wait for
* completion of the work.
xfs: per-cpu deferred inode inactivation queues Move inode inactivation to background work contexts so that it no longer runs in the context that releases the final reference to an inode. This will allow process work that ends up blocking on inactivation to continue doing work while the filesytem processes the inactivation in the background. A typical demonstration of this is unlinking an inode with lots of extents. The extents are removed during inactivation, so this blocks the process that unlinked the inode from the directory structure. By moving the inactivation to the background process, the userspace applicaiton can keep working (e.g. unlinking the next inode in the directory) while the inactivation work on the previous inode is done by a different CPU. The implementation of the queue is relatively simple. We use a per-cpu lockless linked list (llist) to queue inodes for inactivation without requiring serialisation mechanisms, and a work item to allow the queue to be processed by a CPU bound worker thread. We also keep a count of the queue depth so that we can trigger work after a number of deferred inactivations have been queued. The use of a bound workqueue with a single work depth allows the workqueue to run one work item per CPU. We queue the work item on the CPU we are currently running on, and so this essentially gives us affine per-cpu worker threads for the per-cpu queues. THis maintains the effective CPU affinity that occurs within XFS at the AG level due to all objects in a directory being local to an AG. Hence inactivation work tends to run on the same CPU that last accessed all the objects that inactivation accesses and this maintains hot CPU caches for unlink workloads. A depth of 32 inodes was chosen to match the number of inodes in an inode cluster buffer. This hopefully allows sequential allocation/unlink behaviours to defering inactivation of all the inodes in a single cluster buffer at a time, further helping maintain hot CPU and buffer cache accesses while running inactivations. A hard per-cpu queue throttle of 256 inode has been set to avoid runaway queuing when inodes that take a long to time inactivate are being processed. For example, when unlinking inodes with large numbers of extents that can take a lot of processing to free. Signed-off-by: Dave Chinner <dchinner@redhat.com> [djwong: tweak comments and tracepoints, convert opflags to state bits] Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org>
2021-08-06 18:05:39 +00:00
*/
void
xfs_inodegc_push(
xfs: per-cpu deferred inode inactivation queues Move inode inactivation to background work contexts so that it no longer runs in the context that releases the final reference to an inode. This will allow process work that ends up blocking on inactivation to continue doing work while the filesytem processes the inactivation in the background. A typical demonstration of this is unlinking an inode with lots of extents. The extents are removed during inactivation, so this blocks the process that unlinked the inode from the directory structure. By moving the inactivation to the background process, the userspace applicaiton can keep working (e.g. unlinking the next inode in the directory) while the inactivation work on the previous inode is done by a different CPU. The implementation of the queue is relatively simple. We use a per-cpu lockless linked list (llist) to queue inodes for inactivation without requiring serialisation mechanisms, and a work item to allow the queue to be processed by a CPU bound worker thread. We also keep a count of the queue depth so that we can trigger work after a number of deferred inactivations have been queued. The use of a bound workqueue with a single work depth allows the workqueue to run one work item per CPU. We queue the work item on the CPU we are currently running on, and so this essentially gives us affine per-cpu worker threads for the per-cpu queues. THis maintains the effective CPU affinity that occurs within XFS at the AG level due to all objects in a directory being local to an AG. Hence inactivation work tends to run on the same CPU that last accessed all the objects that inactivation accesses and this maintains hot CPU caches for unlink workloads. A depth of 32 inodes was chosen to match the number of inodes in an inode cluster buffer. This hopefully allows sequential allocation/unlink behaviours to defering inactivation of all the inodes in a single cluster buffer at a time, further helping maintain hot CPU and buffer cache accesses while running inactivations. A hard per-cpu queue throttle of 256 inode has been set to avoid runaway queuing when inodes that take a long to time inactivate are being processed. For example, when unlinking inodes with large numbers of extents that can take a lot of processing to free. Signed-off-by: Dave Chinner <dchinner@redhat.com> [djwong: tweak comments and tracepoints, convert opflags to state bits] Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org>
2021-08-06 18:05:39 +00:00
struct xfs_mount *mp)
{
if (!xfs_is_inodegc_enabled(mp))
return;
trace_xfs_inodegc_push(mp, __return_address);
xfs_inodegc_queue_all(mp);
}
xfs: per-cpu deferred inode inactivation queues Move inode inactivation to background work contexts so that it no longer runs in the context that releases the final reference to an inode. This will allow process work that ends up blocking on inactivation to continue doing work while the filesytem processes the inactivation in the background. A typical demonstration of this is unlinking an inode with lots of extents. The extents are removed during inactivation, so this blocks the process that unlinked the inode from the directory structure. By moving the inactivation to the background process, the userspace applicaiton can keep working (e.g. unlinking the next inode in the directory) while the inactivation work on the previous inode is done by a different CPU. The implementation of the queue is relatively simple. We use a per-cpu lockless linked list (llist) to queue inodes for inactivation without requiring serialisation mechanisms, and a work item to allow the queue to be processed by a CPU bound worker thread. We also keep a count of the queue depth so that we can trigger work after a number of deferred inactivations have been queued. The use of a bound workqueue with a single work depth allows the workqueue to run one work item per CPU. We queue the work item on the CPU we are currently running on, and so this essentially gives us affine per-cpu worker threads for the per-cpu queues. THis maintains the effective CPU affinity that occurs within XFS at the AG level due to all objects in a directory being local to an AG. Hence inactivation work tends to run on the same CPU that last accessed all the objects that inactivation accesses and this maintains hot CPU caches for unlink workloads. A depth of 32 inodes was chosen to match the number of inodes in an inode cluster buffer. This hopefully allows sequential allocation/unlink behaviours to defering inactivation of all the inodes in a single cluster buffer at a time, further helping maintain hot CPU and buffer cache accesses while running inactivations. A hard per-cpu queue throttle of 256 inode has been set to avoid runaway queuing when inodes that take a long to time inactivate are being processed. For example, when unlinking inodes with large numbers of extents that can take a lot of processing to free. Signed-off-by: Dave Chinner <dchinner@redhat.com> [djwong: tweak comments and tracepoints, convert opflags to state bits] Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org>
2021-08-06 18:05:39 +00:00
/*
* Force all currently queued inode inactivation work to run immediately and
* wait for the work to finish.
*/
xfs: collect errors from inodegc for unlinked inode recovery Unlinked list recovery requires errors removing the inode the from the unlinked list get fed back to the main recovery loop. Now that we offload the unlinking to the inodegc work, we don't get errors being fed back when we trip over a corruption that prevents the inode from being removed from the unlinked list. This means we never clear the corrupt unlinked list bucket, resulting in runtime operations eventually tripping over it and shutting down. Fix this by collecting inodegc worker errors and feed them back to the flush caller. This is largely best effort - the only context that really cares is log recovery, and it only flushes a single inode at a time so we don't need complex synchronised handling. Essentially the inodegc workers will capture the first error that occurs and the next flush will gather them and clear them. The flush itself will only report the first gathered error. In the cases where callers can return errors, propagate the collected inodegc flush error up the error handling chain. In the case of inode unlinked list recovery, there are several superfluous calls to flush queued unlinked inodes - xlog_recover_iunlink_bucket() guarantees that it has flushed the inodegc and collected errors before it returns. Hence nothing in the calling path needs to run a flush, even when an error is returned. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Dave Chinner <david@fromorbit.com>
2023-06-05 04:48:15 +00:00
int
xfs_inodegc_flush(
struct xfs_mount *mp)
{
xfs_inodegc_push(mp);
xfs: per-cpu deferred inode inactivation queues Move inode inactivation to background work contexts so that it no longer runs in the context that releases the final reference to an inode. This will allow process work that ends up blocking on inactivation to continue doing work while the filesytem processes the inactivation in the background. A typical demonstration of this is unlinking an inode with lots of extents. The extents are removed during inactivation, so this blocks the process that unlinked the inode from the directory structure. By moving the inactivation to the background process, the userspace applicaiton can keep working (e.g. unlinking the next inode in the directory) while the inactivation work on the previous inode is done by a different CPU. The implementation of the queue is relatively simple. We use a per-cpu lockless linked list (llist) to queue inodes for inactivation without requiring serialisation mechanisms, and a work item to allow the queue to be processed by a CPU bound worker thread. We also keep a count of the queue depth so that we can trigger work after a number of deferred inactivations have been queued. The use of a bound workqueue with a single work depth allows the workqueue to run one work item per CPU. We queue the work item on the CPU we are currently running on, and so this essentially gives us affine per-cpu worker threads for the per-cpu queues. THis maintains the effective CPU affinity that occurs within XFS at the AG level due to all objects in a directory being local to an AG. Hence inactivation work tends to run on the same CPU that last accessed all the objects that inactivation accesses and this maintains hot CPU caches for unlink workloads. A depth of 32 inodes was chosen to match the number of inodes in an inode cluster buffer. This hopefully allows sequential allocation/unlink behaviours to defering inactivation of all the inodes in a single cluster buffer at a time, further helping maintain hot CPU and buffer cache accesses while running inactivations. A hard per-cpu queue throttle of 256 inode has been set to avoid runaway queuing when inodes that take a long to time inactivate are being processed. For example, when unlinking inodes with large numbers of extents that can take a lot of processing to free. Signed-off-by: Dave Chinner <dchinner@redhat.com> [djwong: tweak comments and tracepoints, convert opflags to state bits] Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org>
2021-08-06 18:05:39 +00:00
trace_xfs_inodegc_flush(mp, __return_address);
xfs: collect errors from inodegc for unlinked inode recovery Unlinked list recovery requires errors removing the inode the from the unlinked list get fed back to the main recovery loop. Now that we offload the unlinking to the inodegc work, we don't get errors being fed back when we trip over a corruption that prevents the inode from being removed from the unlinked list. This means we never clear the corrupt unlinked list bucket, resulting in runtime operations eventually tripping over it and shutting down. Fix this by collecting inodegc worker errors and feed them back to the flush caller. This is largely best effort - the only context that really cares is log recovery, and it only flushes a single inode at a time so we don't need complex synchronised handling. Essentially the inodegc workers will capture the first error that occurs and the next flush will gather them and clear them. The flush itself will only report the first gathered error. In the cases where callers can return errors, propagate the collected inodegc flush error up the error handling chain. In the case of inode unlinked list recovery, there are several superfluous calls to flush queued unlinked inodes - xlog_recover_iunlink_bucket() guarantees that it has flushed the inodegc and collected errors before it returns. Hence nothing in the calling path needs to run a flush, even when an error is returned. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Dave Chinner <david@fromorbit.com>
2023-06-05 04:48:15 +00:00
return xfs_inodegc_wait_all(mp);
xfs: per-cpu deferred inode inactivation queues Move inode inactivation to background work contexts so that it no longer runs in the context that releases the final reference to an inode. This will allow process work that ends up blocking on inactivation to continue doing work while the filesytem processes the inactivation in the background. A typical demonstration of this is unlinking an inode with lots of extents. The extents are removed during inactivation, so this blocks the process that unlinked the inode from the directory structure. By moving the inactivation to the background process, the userspace applicaiton can keep working (e.g. unlinking the next inode in the directory) while the inactivation work on the previous inode is done by a different CPU. The implementation of the queue is relatively simple. We use a per-cpu lockless linked list (llist) to queue inodes for inactivation without requiring serialisation mechanisms, and a work item to allow the queue to be processed by a CPU bound worker thread. We also keep a count of the queue depth so that we can trigger work after a number of deferred inactivations have been queued. The use of a bound workqueue with a single work depth allows the workqueue to run one work item per CPU. We queue the work item on the CPU we are currently running on, and so this essentially gives us affine per-cpu worker threads for the per-cpu queues. THis maintains the effective CPU affinity that occurs within XFS at the AG level due to all objects in a directory being local to an AG. Hence inactivation work tends to run on the same CPU that last accessed all the objects that inactivation accesses and this maintains hot CPU caches for unlink workloads. A depth of 32 inodes was chosen to match the number of inodes in an inode cluster buffer. This hopefully allows sequential allocation/unlink behaviours to defering inactivation of all the inodes in a single cluster buffer at a time, further helping maintain hot CPU and buffer cache accesses while running inactivations. A hard per-cpu queue throttle of 256 inode has been set to avoid runaway queuing when inodes that take a long to time inactivate are being processed. For example, when unlinking inodes with large numbers of extents that can take a lot of processing to free. Signed-off-by: Dave Chinner <dchinner@redhat.com> [djwong: tweak comments and tracepoints, convert opflags to state bits] Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org>
2021-08-06 18:05:39 +00:00
}
/*
* Flush all the pending work and then disable the inode inactivation background
xfs: fix xfs_inodegc_stop racing with mod_delayed_work syzbot reported this warning from the faux inodegc shrinker that tries to kick off inodegc work: ------------[ cut here ]------------ WARNING: CPU: 1 PID: 102 at kernel/workqueue.c:1445 __queue_work+0xd44/0x1120 kernel/workqueue.c:1444 RIP: 0010:__queue_work+0xd44/0x1120 kernel/workqueue.c:1444 Call Trace: __queue_delayed_work+0x1c8/0x270 kernel/workqueue.c:1672 mod_delayed_work_on+0xe1/0x220 kernel/workqueue.c:1746 xfs_inodegc_shrinker_scan fs/xfs/xfs_icache.c:2212 [inline] xfs_inodegc_shrinker_scan+0x250/0x4f0 fs/xfs/xfs_icache.c:2191 do_shrink_slab+0x428/0xaa0 mm/vmscan.c:853 shrink_slab+0x175/0x660 mm/vmscan.c:1013 shrink_one+0x502/0x810 mm/vmscan.c:5343 shrink_many mm/vmscan.c:5394 [inline] lru_gen_shrink_node mm/vmscan.c:5511 [inline] shrink_node+0x2064/0x35f0 mm/vmscan.c:6459 kswapd_shrink_node mm/vmscan.c:7262 [inline] balance_pgdat+0xa02/0x1ac0 mm/vmscan.c:7452 kswapd+0x677/0xd60 mm/vmscan.c:7712 kthread+0x2e8/0x3a0 kernel/kthread.c:376 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:308 This warning corresponds to this code in __queue_work: /* * For a draining wq, only works from the same workqueue are * allowed. The __WQ_DESTROYING helps to spot the issue that * queues a new work item to a wq after destroy_workqueue(wq). */ if (unlikely(wq->flags & (__WQ_DESTROYING | __WQ_DRAINING) && WARN_ON_ONCE(!is_chained_work(wq)))) return; For this to trip, we must have a thread draining the inodedgc workqueue and a second thread trying to queue inodegc work to that workqueue. This can happen if freezing or a ro remount race with reclaim poking our faux inodegc shrinker and another thread dropping an unlinked O_RDONLY file: Thread 0 Thread 1 Thread 2 xfs_inodegc_stop xfs_inodegc_shrinker_scan xfs_is_inodegc_enabled <yes, will continue> xfs_clear_inodegc_enabled xfs_inodegc_queue_all <list empty, do not queue inodegc worker> xfs_inodegc_queue <add to list> xfs_is_inodegc_enabled <no, returns> drain_workqueue <set WQ_DRAINING> llist_empty <no, will queue list> mod_delayed_work_on(..., 0) __queue_work <sees WQ_DRAINING, kaboom> In other words, everything between the access to inodegc_enabled state and the decision to poke the inodegc workqueue requires some kind of coordination to avoid the WQ_DRAINING state. We could perhaps introduce a lock here, but we could also try to eliminate WQ_DRAINING from the picture. We could replace the drain_workqueue call with a loop that flushes the workqueue and queues workers as long as there is at least one inode present in the per-cpu inodegc llists. We've disabled inodegc at this point, so we know that the number of queued inodes will eventually hit zero as long as xfs_inodegc_start cannot reactivate the workers. There are four callers of xfs_inodegc_start. Three of them come from the VFS with s_umount held: filesystem thawing, failed filesystem freezing, and the rw remount transition. The fourth caller is mounting rw (no remount or freezing possible). There are three callers ofs xfs_inodegc_stop. One is unmounting (no remount or thaw possible). Two of them come from the VFS with s_umount held: fs freezing and ro remount transition. Hence, it is correct to replace the drain_workqueue call with a loop that drains the inodegc llists. Fixes: 6191cf3ad59f ("xfs: flush inodegc workqueue tasks before cancel") Signed-off-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2023-05-01 23:16:14 +00:00
* workers and wait for them to stop. Caller must hold sb->s_umount to
* coordinate changes in the inodegc_enabled state.
xfs: per-cpu deferred inode inactivation queues Move inode inactivation to background work contexts so that it no longer runs in the context that releases the final reference to an inode. This will allow process work that ends up blocking on inactivation to continue doing work while the filesytem processes the inactivation in the background. A typical demonstration of this is unlinking an inode with lots of extents. The extents are removed during inactivation, so this blocks the process that unlinked the inode from the directory structure. By moving the inactivation to the background process, the userspace applicaiton can keep working (e.g. unlinking the next inode in the directory) while the inactivation work on the previous inode is done by a different CPU. The implementation of the queue is relatively simple. We use a per-cpu lockless linked list (llist) to queue inodes for inactivation without requiring serialisation mechanisms, and a work item to allow the queue to be processed by a CPU bound worker thread. We also keep a count of the queue depth so that we can trigger work after a number of deferred inactivations have been queued. The use of a bound workqueue with a single work depth allows the workqueue to run one work item per CPU. We queue the work item on the CPU we are currently running on, and so this essentially gives us affine per-cpu worker threads for the per-cpu queues. THis maintains the effective CPU affinity that occurs within XFS at the AG level due to all objects in a directory being local to an AG. Hence inactivation work tends to run on the same CPU that last accessed all the objects that inactivation accesses and this maintains hot CPU caches for unlink workloads. A depth of 32 inodes was chosen to match the number of inodes in an inode cluster buffer. This hopefully allows sequential allocation/unlink behaviours to defering inactivation of all the inodes in a single cluster buffer at a time, further helping maintain hot CPU and buffer cache accesses while running inactivations. A hard per-cpu queue throttle of 256 inode has been set to avoid runaway queuing when inodes that take a long to time inactivate are being processed. For example, when unlinking inodes with large numbers of extents that can take a lot of processing to free. Signed-off-by: Dave Chinner <dchinner@redhat.com> [djwong: tweak comments and tracepoints, convert opflags to state bits] Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org>
2021-08-06 18:05:39 +00:00
*/
void
xfs_inodegc_stop(
struct xfs_mount *mp)
{
xfs: fix xfs_inodegc_stop racing with mod_delayed_work syzbot reported this warning from the faux inodegc shrinker that tries to kick off inodegc work: ------------[ cut here ]------------ WARNING: CPU: 1 PID: 102 at kernel/workqueue.c:1445 __queue_work+0xd44/0x1120 kernel/workqueue.c:1444 RIP: 0010:__queue_work+0xd44/0x1120 kernel/workqueue.c:1444 Call Trace: __queue_delayed_work+0x1c8/0x270 kernel/workqueue.c:1672 mod_delayed_work_on+0xe1/0x220 kernel/workqueue.c:1746 xfs_inodegc_shrinker_scan fs/xfs/xfs_icache.c:2212 [inline] xfs_inodegc_shrinker_scan+0x250/0x4f0 fs/xfs/xfs_icache.c:2191 do_shrink_slab+0x428/0xaa0 mm/vmscan.c:853 shrink_slab+0x175/0x660 mm/vmscan.c:1013 shrink_one+0x502/0x810 mm/vmscan.c:5343 shrink_many mm/vmscan.c:5394 [inline] lru_gen_shrink_node mm/vmscan.c:5511 [inline] shrink_node+0x2064/0x35f0 mm/vmscan.c:6459 kswapd_shrink_node mm/vmscan.c:7262 [inline] balance_pgdat+0xa02/0x1ac0 mm/vmscan.c:7452 kswapd+0x677/0xd60 mm/vmscan.c:7712 kthread+0x2e8/0x3a0 kernel/kthread.c:376 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:308 This warning corresponds to this code in __queue_work: /* * For a draining wq, only works from the same workqueue are * allowed. The __WQ_DESTROYING helps to spot the issue that * queues a new work item to a wq after destroy_workqueue(wq). */ if (unlikely(wq->flags & (__WQ_DESTROYING | __WQ_DRAINING) && WARN_ON_ONCE(!is_chained_work(wq)))) return; For this to trip, we must have a thread draining the inodedgc workqueue and a second thread trying to queue inodegc work to that workqueue. This can happen if freezing or a ro remount race with reclaim poking our faux inodegc shrinker and another thread dropping an unlinked O_RDONLY file: Thread 0 Thread 1 Thread 2 xfs_inodegc_stop xfs_inodegc_shrinker_scan xfs_is_inodegc_enabled <yes, will continue> xfs_clear_inodegc_enabled xfs_inodegc_queue_all <list empty, do not queue inodegc worker> xfs_inodegc_queue <add to list> xfs_is_inodegc_enabled <no, returns> drain_workqueue <set WQ_DRAINING> llist_empty <no, will queue list> mod_delayed_work_on(..., 0) __queue_work <sees WQ_DRAINING, kaboom> In other words, everything between the access to inodegc_enabled state and the decision to poke the inodegc workqueue requires some kind of coordination to avoid the WQ_DRAINING state. We could perhaps introduce a lock here, but we could also try to eliminate WQ_DRAINING from the picture. We could replace the drain_workqueue call with a loop that flushes the workqueue and queues workers as long as there is at least one inode present in the per-cpu inodegc llists. We've disabled inodegc at this point, so we know that the number of queued inodes will eventually hit zero as long as xfs_inodegc_start cannot reactivate the workers. There are four callers of xfs_inodegc_start. Three of them come from the VFS with s_umount held: filesystem thawing, failed filesystem freezing, and the rw remount transition. The fourth caller is mounting rw (no remount or freezing possible). There are three callers ofs xfs_inodegc_stop. One is unmounting (no remount or thaw possible). Two of them come from the VFS with s_umount held: fs freezing and ro remount transition. Hence, it is correct to replace the drain_workqueue call with a loop that drains the inodegc llists. Fixes: 6191cf3ad59f ("xfs: flush inodegc workqueue tasks before cancel") Signed-off-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2023-05-01 23:16:14 +00:00
bool rerun;
xfs: per-cpu deferred inode inactivation queues Move inode inactivation to background work contexts so that it no longer runs in the context that releases the final reference to an inode. This will allow process work that ends up blocking on inactivation to continue doing work while the filesytem processes the inactivation in the background. A typical demonstration of this is unlinking an inode with lots of extents. The extents are removed during inactivation, so this blocks the process that unlinked the inode from the directory structure. By moving the inactivation to the background process, the userspace applicaiton can keep working (e.g. unlinking the next inode in the directory) while the inactivation work on the previous inode is done by a different CPU. The implementation of the queue is relatively simple. We use a per-cpu lockless linked list (llist) to queue inodes for inactivation without requiring serialisation mechanisms, and a work item to allow the queue to be processed by a CPU bound worker thread. We also keep a count of the queue depth so that we can trigger work after a number of deferred inactivations have been queued. The use of a bound workqueue with a single work depth allows the workqueue to run one work item per CPU. We queue the work item on the CPU we are currently running on, and so this essentially gives us affine per-cpu worker threads for the per-cpu queues. THis maintains the effective CPU affinity that occurs within XFS at the AG level due to all objects in a directory being local to an AG. Hence inactivation work tends to run on the same CPU that last accessed all the objects that inactivation accesses and this maintains hot CPU caches for unlink workloads. A depth of 32 inodes was chosen to match the number of inodes in an inode cluster buffer. This hopefully allows sequential allocation/unlink behaviours to defering inactivation of all the inodes in a single cluster buffer at a time, further helping maintain hot CPU and buffer cache accesses while running inactivations. A hard per-cpu queue throttle of 256 inode has been set to avoid runaway queuing when inodes that take a long to time inactivate are being processed. For example, when unlinking inodes with large numbers of extents that can take a lot of processing to free. Signed-off-by: Dave Chinner <dchinner@redhat.com> [djwong: tweak comments and tracepoints, convert opflags to state bits] Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org>
2021-08-06 18:05:39 +00:00
if (!xfs_clear_inodegc_enabled(mp))
return;
xfs: fix xfs_inodegc_stop racing with mod_delayed_work syzbot reported this warning from the faux inodegc shrinker that tries to kick off inodegc work: ------------[ cut here ]------------ WARNING: CPU: 1 PID: 102 at kernel/workqueue.c:1445 __queue_work+0xd44/0x1120 kernel/workqueue.c:1444 RIP: 0010:__queue_work+0xd44/0x1120 kernel/workqueue.c:1444 Call Trace: __queue_delayed_work+0x1c8/0x270 kernel/workqueue.c:1672 mod_delayed_work_on+0xe1/0x220 kernel/workqueue.c:1746 xfs_inodegc_shrinker_scan fs/xfs/xfs_icache.c:2212 [inline] xfs_inodegc_shrinker_scan+0x250/0x4f0 fs/xfs/xfs_icache.c:2191 do_shrink_slab+0x428/0xaa0 mm/vmscan.c:853 shrink_slab+0x175/0x660 mm/vmscan.c:1013 shrink_one+0x502/0x810 mm/vmscan.c:5343 shrink_many mm/vmscan.c:5394 [inline] lru_gen_shrink_node mm/vmscan.c:5511 [inline] shrink_node+0x2064/0x35f0 mm/vmscan.c:6459 kswapd_shrink_node mm/vmscan.c:7262 [inline] balance_pgdat+0xa02/0x1ac0 mm/vmscan.c:7452 kswapd+0x677/0xd60 mm/vmscan.c:7712 kthread+0x2e8/0x3a0 kernel/kthread.c:376 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:308 This warning corresponds to this code in __queue_work: /* * For a draining wq, only works from the same workqueue are * allowed. The __WQ_DESTROYING helps to spot the issue that * queues a new work item to a wq after destroy_workqueue(wq). */ if (unlikely(wq->flags & (__WQ_DESTROYING | __WQ_DRAINING) && WARN_ON_ONCE(!is_chained_work(wq)))) return; For this to trip, we must have a thread draining the inodedgc workqueue and a second thread trying to queue inodegc work to that workqueue. This can happen if freezing or a ro remount race with reclaim poking our faux inodegc shrinker and another thread dropping an unlinked O_RDONLY file: Thread 0 Thread 1 Thread 2 xfs_inodegc_stop xfs_inodegc_shrinker_scan xfs_is_inodegc_enabled <yes, will continue> xfs_clear_inodegc_enabled xfs_inodegc_queue_all <list empty, do not queue inodegc worker> xfs_inodegc_queue <add to list> xfs_is_inodegc_enabled <no, returns> drain_workqueue <set WQ_DRAINING> llist_empty <no, will queue list> mod_delayed_work_on(..., 0) __queue_work <sees WQ_DRAINING, kaboom> In other words, everything between the access to inodegc_enabled state and the decision to poke the inodegc workqueue requires some kind of coordination to avoid the WQ_DRAINING state. We could perhaps introduce a lock here, but we could also try to eliminate WQ_DRAINING from the picture. We could replace the drain_workqueue call with a loop that flushes the workqueue and queues workers as long as there is at least one inode present in the per-cpu inodegc llists. We've disabled inodegc at this point, so we know that the number of queued inodes will eventually hit zero as long as xfs_inodegc_start cannot reactivate the workers. There are four callers of xfs_inodegc_start. Three of them come from the VFS with s_umount held: filesystem thawing, failed filesystem freezing, and the rw remount transition. The fourth caller is mounting rw (no remount or freezing possible). There are three callers ofs xfs_inodegc_stop. One is unmounting (no remount or thaw possible). Two of them come from the VFS with s_umount held: fs freezing and ro remount transition. Hence, it is correct to replace the drain_workqueue call with a loop that drains the inodegc llists. Fixes: 6191cf3ad59f ("xfs: flush inodegc workqueue tasks before cancel") Signed-off-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2023-05-01 23:16:14 +00:00
/*
* Drain all pending inodegc work, including inodes that could be
* queued by racing xfs_inodegc_queue or xfs_inodegc_shrinker_scan
* threads that sample the inodegc state just prior to us clearing it.
* The inodegc flag state prevents new threads from queuing more
* inodes, so we queue pending work items and flush the workqueue until
* all inodegc lists are empty. IOWs, we cannot use drain_workqueue
* here because it does not allow other unserialized mechanisms to
* reschedule inodegc work while this draining is in progress.
*/
xfs: per-cpu deferred inode inactivation queues Move inode inactivation to background work contexts so that it no longer runs in the context that releases the final reference to an inode. This will allow process work that ends up blocking on inactivation to continue doing work while the filesytem processes the inactivation in the background. A typical demonstration of this is unlinking an inode with lots of extents. The extents are removed during inactivation, so this blocks the process that unlinked the inode from the directory structure. By moving the inactivation to the background process, the userspace applicaiton can keep working (e.g. unlinking the next inode in the directory) while the inactivation work on the previous inode is done by a different CPU. The implementation of the queue is relatively simple. We use a per-cpu lockless linked list (llist) to queue inodes for inactivation without requiring serialisation mechanisms, and a work item to allow the queue to be processed by a CPU bound worker thread. We also keep a count of the queue depth so that we can trigger work after a number of deferred inactivations have been queued. The use of a bound workqueue with a single work depth allows the workqueue to run one work item per CPU. We queue the work item on the CPU we are currently running on, and so this essentially gives us affine per-cpu worker threads for the per-cpu queues. THis maintains the effective CPU affinity that occurs within XFS at the AG level due to all objects in a directory being local to an AG. Hence inactivation work tends to run on the same CPU that last accessed all the objects that inactivation accesses and this maintains hot CPU caches for unlink workloads. A depth of 32 inodes was chosen to match the number of inodes in an inode cluster buffer. This hopefully allows sequential allocation/unlink behaviours to defering inactivation of all the inodes in a single cluster buffer at a time, further helping maintain hot CPU and buffer cache accesses while running inactivations. A hard per-cpu queue throttle of 256 inode has been set to avoid runaway queuing when inodes that take a long to time inactivate are being processed. For example, when unlinking inodes with large numbers of extents that can take a lot of processing to free. Signed-off-by: Dave Chinner <dchinner@redhat.com> [djwong: tweak comments and tracepoints, convert opflags to state bits] Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org>
2021-08-06 18:05:39 +00:00
xfs_inodegc_queue_all(mp);
xfs: fix xfs_inodegc_stop racing with mod_delayed_work syzbot reported this warning from the faux inodegc shrinker that tries to kick off inodegc work: ------------[ cut here ]------------ WARNING: CPU: 1 PID: 102 at kernel/workqueue.c:1445 __queue_work+0xd44/0x1120 kernel/workqueue.c:1444 RIP: 0010:__queue_work+0xd44/0x1120 kernel/workqueue.c:1444 Call Trace: __queue_delayed_work+0x1c8/0x270 kernel/workqueue.c:1672 mod_delayed_work_on+0xe1/0x220 kernel/workqueue.c:1746 xfs_inodegc_shrinker_scan fs/xfs/xfs_icache.c:2212 [inline] xfs_inodegc_shrinker_scan+0x250/0x4f0 fs/xfs/xfs_icache.c:2191 do_shrink_slab+0x428/0xaa0 mm/vmscan.c:853 shrink_slab+0x175/0x660 mm/vmscan.c:1013 shrink_one+0x502/0x810 mm/vmscan.c:5343 shrink_many mm/vmscan.c:5394 [inline] lru_gen_shrink_node mm/vmscan.c:5511 [inline] shrink_node+0x2064/0x35f0 mm/vmscan.c:6459 kswapd_shrink_node mm/vmscan.c:7262 [inline] balance_pgdat+0xa02/0x1ac0 mm/vmscan.c:7452 kswapd+0x677/0xd60 mm/vmscan.c:7712 kthread+0x2e8/0x3a0 kernel/kthread.c:376 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:308 This warning corresponds to this code in __queue_work: /* * For a draining wq, only works from the same workqueue are * allowed. The __WQ_DESTROYING helps to spot the issue that * queues a new work item to a wq after destroy_workqueue(wq). */ if (unlikely(wq->flags & (__WQ_DESTROYING | __WQ_DRAINING) && WARN_ON_ONCE(!is_chained_work(wq)))) return; For this to trip, we must have a thread draining the inodedgc workqueue and a second thread trying to queue inodegc work to that workqueue. This can happen if freezing or a ro remount race with reclaim poking our faux inodegc shrinker and another thread dropping an unlinked O_RDONLY file: Thread 0 Thread 1 Thread 2 xfs_inodegc_stop xfs_inodegc_shrinker_scan xfs_is_inodegc_enabled <yes, will continue> xfs_clear_inodegc_enabled xfs_inodegc_queue_all <list empty, do not queue inodegc worker> xfs_inodegc_queue <add to list> xfs_is_inodegc_enabled <no, returns> drain_workqueue <set WQ_DRAINING> llist_empty <no, will queue list> mod_delayed_work_on(..., 0) __queue_work <sees WQ_DRAINING, kaboom> In other words, everything between the access to inodegc_enabled state and the decision to poke the inodegc workqueue requires some kind of coordination to avoid the WQ_DRAINING state. We could perhaps introduce a lock here, but we could also try to eliminate WQ_DRAINING from the picture. We could replace the drain_workqueue call with a loop that flushes the workqueue and queues workers as long as there is at least one inode present in the per-cpu inodegc llists. We've disabled inodegc at this point, so we know that the number of queued inodes will eventually hit zero as long as xfs_inodegc_start cannot reactivate the workers. There are four callers of xfs_inodegc_start. Three of them come from the VFS with s_umount held: filesystem thawing, failed filesystem freezing, and the rw remount transition. The fourth caller is mounting rw (no remount or freezing possible). There are three callers ofs xfs_inodegc_stop. One is unmounting (no remount or thaw possible). Two of them come from the VFS with s_umount held: fs freezing and ro remount transition. Hence, it is correct to replace the drain_workqueue call with a loop that drains the inodegc llists. Fixes: 6191cf3ad59f ("xfs: flush inodegc workqueue tasks before cancel") Signed-off-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2023-05-01 23:16:14 +00:00
do {
flush_workqueue(mp->m_inodegc_wq);
rerun = xfs_inodegc_queue_all(mp);
} while (rerun);
xfs: per-cpu deferred inode inactivation queues Move inode inactivation to background work contexts so that it no longer runs in the context that releases the final reference to an inode. This will allow process work that ends up blocking on inactivation to continue doing work while the filesytem processes the inactivation in the background. A typical demonstration of this is unlinking an inode with lots of extents. The extents are removed during inactivation, so this blocks the process that unlinked the inode from the directory structure. By moving the inactivation to the background process, the userspace applicaiton can keep working (e.g. unlinking the next inode in the directory) while the inactivation work on the previous inode is done by a different CPU. The implementation of the queue is relatively simple. We use a per-cpu lockless linked list (llist) to queue inodes for inactivation without requiring serialisation mechanisms, and a work item to allow the queue to be processed by a CPU bound worker thread. We also keep a count of the queue depth so that we can trigger work after a number of deferred inactivations have been queued. The use of a bound workqueue with a single work depth allows the workqueue to run one work item per CPU. We queue the work item on the CPU we are currently running on, and so this essentially gives us affine per-cpu worker threads for the per-cpu queues. THis maintains the effective CPU affinity that occurs within XFS at the AG level due to all objects in a directory being local to an AG. Hence inactivation work tends to run on the same CPU that last accessed all the objects that inactivation accesses and this maintains hot CPU caches for unlink workloads. A depth of 32 inodes was chosen to match the number of inodes in an inode cluster buffer. This hopefully allows sequential allocation/unlink behaviours to defering inactivation of all the inodes in a single cluster buffer at a time, further helping maintain hot CPU and buffer cache accesses while running inactivations. A hard per-cpu queue throttle of 256 inode has been set to avoid runaway queuing when inodes that take a long to time inactivate are being processed. For example, when unlinking inodes with large numbers of extents that can take a lot of processing to free. Signed-off-by: Dave Chinner <dchinner@redhat.com> [djwong: tweak comments and tracepoints, convert opflags to state bits] Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org>
2021-08-06 18:05:39 +00:00
trace_xfs_inodegc_stop(mp, __return_address);
}
/*
* Enable the inode inactivation background workers and schedule deferred inode
xfs: fix xfs_inodegc_stop racing with mod_delayed_work syzbot reported this warning from the faux inodegc shrinker that tries to kick off inodegc work: ------------[ cut here ]------------ WARNING: CPU: 1 PID: 102 at kernel/workqueue.c:1445 __queue_work+0xd44/0x1120 kernel/workqueue.c:1444 RIP: 0010:__queue_work+0xd44/0x1120 kernel/workqueue.c:1444 Call Trace: __queue_delayed_work+0x1c8/0x270 kernel/workqueue.c:1672 mod_delayed_work_on+0xe1/0x220 kernel/workqueue.c:1746 xfs_inodegc_shrinker_scan fs/xfs/xfs_icache.c:2212 [inline] xfs_inodegc_shrinker_scan+0x250/0x4f0 fs/xfs/xfs_icache.c:2191 do_shrink_slab+0x428/0xaa0 mm/vmscan.c:853 shrink_slab+0x175/0x660 mm/vmscan.c:1013 shrink_one+0x502/0x810 mm/vmscan.c:5343 shrink_many mm/vmscan.c:5394 [inline] lru_gen_shrink_node mm/vmscan.c:5511 [inline] shrink_node+0x2064/0x35f0 mm/vmscan.c:6459 kswapd_shrink_node mm/vmscan.c:7262 [inline] balance_pgdat+0xa02/0x1ac0 mm/vmscan.c:7452 kswapd+0x677/0xd60 mm/vmscan.c:7712 kthread+0x2e8/0x3a0 kernel/kthread.c:376 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:308 This warning corresponds to this code in __queue_work: /* * For a draining wq, only works from the same workqueue are * allowed. The __WQ_DESTROYING helps to spot the issue that * queues a new work item to a wq after destroy_workqueue(wq). */ if (unlikely(wq->flags & (__WQ_DESTROYING | __WQ_DRAINING) && WARN_ON_ONCE(!is_chained_work(wq)))) return; For this to trip, we must have a thread draining the inodedgc workqueue and a second thread trying to queue inodegc work to that workqueue. This can happen if freezing or a ro remount race with reclaim poking our faux inodegc shrinker and another thread dropping an unlinked O_RDONLY file: Thread 0 Thread 1 Thread 2 xfs_inodegc_stop xfs_inodegc_shrinker_scan xfs_is_inodegc_enabled <yes, will continue> xfs_clear_inodegc_enabled xfs_inodegc_queue_all <list empty, do not queue inodegc worker> xfs_inodegc_queue <add to list> xfs_is_inodegc_enabled <no, returns> drain_workqueue <set WQ_DRAINING> llist_empty <no, will queue list> mod_delayed_work_on(..., 0) __queue_work <sees WQ_DRAINING, kaboom> In other words, everything between the access to inodegc_enabled state and the decision to poke the inodegc workqueue requires some kind of coordination to avoid the WQ_DRAINING state. We could perhaps introduce a lock here, but we could also try to eliminate WQ_DRAINING from the picture. We could replace the drain_workqueue call with a loop that flushes the workqueue and queues workers as long as there is at least one inode present in the per-cpu inodegc llists. We've disabled inodegc at this point, so we know that the number of queued inodes will eventually hit zero as long as xfs_inodegc_start cannot reactivate the workers. There are four callers of xfs_inodegc_start. Three of them come from the VFS with s_umount held: filesystem thawing, failed filesystem freezing, and the rw remount transition. The fourth caller is mounting rw (no remount or freezing possible). There are three callers ofs xfs_inodegc_stop. One is unmounting (no remount or thaw possible). Two of them come from the VFS with s_umount held: fs freezing and ro remount transition. Hence, it is correct to replace the drain_workqueue call with a loop that drains the inodegc llists. Fixes: 6191cf3ad59f ("xfs: flush inodegc workqueue tasks before cancel") Signed-off-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2023-05-01 23:16:14 +00:00
* inactivation work if there is any. Caller must hold sb->s_umount to
* coordinate changes in the inodegc_enabled state.
xfs: per-cpu deferred inode inactivation queues Move inode inactivation to background work contexts so that it no longer runs in the context that releases the final reference to an inode. This will allow process work that ends up blocking on inactivation to continue doing work while the filesytem processes the inactivation in the background. A typical demonstration of this is unlinking an inode with lots of extents. The extents are removed during inactivation, so this blocks the process that unlinked the inode from the directory structure. By moving the inactivation to the background process, the userspace applicaiton can keep working (e.g. unlinking the next inode in the directory) while the inactivation work on the previous inode is done by a different CPU. The implementation of the queue is relatively simple. We use a per-cpu lockless linked list (llist) to queue inodes for inactivation without requiring serialisation mechanisms, and a work item to allow the queue to be processed by a CPU bound worker thread. We also keep a count of the queue depth so that we can trigger work after a number of deferred inactivations have been queued. The use of a bound workqueue with a single work depth allows the workqueue to run one work item per CPU. We queue the work item on the CPU we are currently running on, and so this essentially gives us affine per-cpu worker threads for the per-cpu queues. THis maintains the effective CPU affinity that occurs within XFS at the AG level due to all objects in a directory being local to an AG. Hence inactivation work tends to run on the same CPU that last accessed all the objects that inactivation accesses and this maintains hot CPU caches for unlink workloads. A depth of 32 inodes was chosen to match the number of inodes in an inode cluster buffer. This hopefully allows sequential allocation/unlink behaviours to defering inactivation of all the inodes in a single cluster buffer at a time, further helping maintain hot CPU and buffer cache accesses while running inactivations. A hard per-cpu queue throttle of 256 inode has been set to avoid runaway queuing when inodes that take a long to time inactivate are being processed. For example, when unlinking inodes with large numbers of extents that can take a lot of processing to free. Signed-off-by: Dave Chinner <dchinner@redhat.com> [djwong: tweak comments and tracepoints, convert opflags to state bits] Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org>
2021-08-06 18:05:39 +00:00
*/
void
xfs_inodegc_start(
struct xfs_mount *mp)
{
if (xfs_set_inodegc_enabled(mp))
return;
trace_xfs_inodegc_start(mp, __return_address);
xfs_inodegc_queue_all(mp);
}
#ifdef CONFIG_XFS_RT
static inline bool
xfs_inodegc_want_queue_rt_file(
struct xfs_inode *ip)
{
struct xfs_mount *mp = ip->i_mount;
if (!XFS_IS_REALTIME_INODE(ip))
return false;
if (__percpu_counter_compare(&mp->m_frextents,
mp->m_low_rtexts[XFS_LOWSP_5_PCNT],
XFS_FDBLOCKS_BATCH) < 0)
return true;
return false;
}
#else
# define xfs_inodegc_want_queue_rt_file(ip) (false)
#endif /* CONFIG_XFS_RT */
xfs: per-cpu deferred inode inactivation queues Move inode inactivation to background work contexts so that it no longer runs in the context that releases the final reference to an inode. This will allow process work that ends up blocking on inactivation to continue doing work while the filesytem processes the inactivation in the background. A typical demonstration of this is unlinking an inode with lots of extents. The extents are removed during inactivation, so this blocks the process that unlinked the inode from the directory structure. By moving the inactivation to the background process, the userspace applicaiton can keep working (e.g. unlinking the next inode in the directory) while the inactivation work on the previous inode is done by a different CPU. The implementation of the queue is relatively simple. We use a per-cpu lockless linked list (llist) to queue inodes for inactivation without requiring serialisation mechanisms, and a work item to allow the queue to be processed by a CPU bound worker thread. We also keep a count of the queue depth so that we can trigger work after a number of deferred inactivations have been queued. The use of a bound workqueue with a single work depth allows the workqueue to run one work item per CPU. We queue the work item on the CPU we are currently running on, and so this essentially gives us affine per-cpu worker threads for the per-cpu queues. THis maintains the effective CPU affinity that occurs within XFS at the AG level due to all objects in a directory being local to an AG. Hence inactivation work tends to run on the same CPU that last accessed all the objects that inactivation accesses and this maintains hot CPU caches for unlink workloads. A depth of 32 inodes was chosen to match the number of inodes in an inode cluster buffer. This hopefully allows sequential allocation/unlink behaviours to defering inactivation of all the inodes in a single cluster buffer at a time, further helping maintain hot CPU and buffer cache accesses while running inactivations. A hard per-cpu queue throttle of 256 inode has been set to avoid runaway queuing when inodes that take a long to time inactivate are being processed. For example, when unlinking inodes with large numbers of extents that can take a lot of processing to free. Signed-off-by: Dave Chinner <dchinner@redhat.com> [djwong: tweak comments and tracepoints, convert opflags to state bits] Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org>
2021-08-06 18:05:39 +00:00
/*
* Schedule the inactivation worker when:
*
* - We've accumulated more than one inode cluster buffer's worth of inodes.
* - There is less than 5% free space left.
* - Any of the quotas for this inode are near an enforcement limit.
xfs: per-cpu deferred inode inactivation queues Move inode inactivation to background work contexts so that it no longer runs in the context that releases the final reference to an inode. This will allow process work that ends up blocking on inactivation to continue doing work while the filesytem processes the inactivation in the background. A typical demonstration of this is unlinking an inode with lots of extents. The extents are removed during inactivation, so this blocks the process that unlinked the inode from the directory structure. By moving the inactivation to the background process, the userspace applicaiton can keep working (e.g. unlinking the next inode in the directory) while the inactivation work on the previous inode is done by a different CPU. The implementation of the queue is relatively simple. We use a per-cpu lockless linked list (llist) to queue inodes for inactivation without requiring serialisation mechanisms, and a work item to allow the queue to be processed by a CPU bound worker thread. We also keep a count of the queue depth so that we can trigger work after a number of deferred inactivations have been queued. The use of a bound workqueue with a single work depth allows the workqueue to run one work item per CPU. We queue the work item on the CPU we are currently running on, and so this essentially gives us affine per-cpu worker threads for the per-cpu queues. THis maintains the effective CPU affinity that occurs within XFS at the AG level due to all objects in a directory being local to an AG. Hence inactivation work tends to run on the same CPU that last accessed all the objects that inactivation accesses and this maintains hot CPU caches for unlink workloads. A depth of 32 inodes was chosen to match the number of inodes in an inode cluster buffer. This hopefully allows sequential allocation/unlink behaviours to defering inactivation of all the inodes in a single cluster buffer at a time, further helping maintain hot CPU and buffer cache accesses while running inactivations. A hard per-cpu queue throttle of 256 inode has been set to avoid runaway queuing when inodes that take a long to time inactivate are being processed. For example, when unlinking inodes with large numbers of extents that can take a lot of processing to free. Signed-off-by: Dave Chinner <dchinner@redhat.com> [djwong: tweak comments and tracepoints, convert opflags to state bits] Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org>
2021-08-06 18:05:39 +00:00
*/
static inline bool
xfs_inodegc_want_queue_work(
struct xfs_inode *ip,
unsigned int items)
{
struct xfs_mount *mp = ip->i_mount;
if (items > mp->m_ino_geo.inodes_per_cluster)
return true;
if (__percpu_counter_compare(&mp->m_fdblocks,
mp->m_low_space[XFS_LOWSP_5_PCNT],
XFS_FDBLOCKS_BATCH) < 0)
return true;
if (xfs_inodegc_want_queue_rt_file(ip))
return true;
if (xfs_inode_near_dquot_enforcement(ip, XFS_DQTYPE_USER))
return true;
if (xfs_inode_near_dquot_enforcement(ip, XFS_DQTYPE_GROUP))
return true;
if (xfs_inode_near_dquot_enforcement(ip, XFS_DQTYPE_PROJ))
return true;
xfs: per-cpu deferred inode inactivation queues Move inode inactivation to background work contexts so that it no longer runs in the context that releases the final reference to an inode. This will allow process work that ends up blocking on inactivation to continue doing work while the filesytem processes the inactivation in the background. A typical demonstration of this is unlinking an inode with lots of extents. The extents are removed during inactivation, so this blocks the process that unlinked the inode from the directory structure. By moving the inactivation to the background process, the userspace applicaiton can keep working (e.g. unlinking the next inode in the directory) while the inactivation work on the previous inode is done by a different CPU. The implementation of the queue is relatively simple. We use a per-cpu lockless linked list (llist) to queue inodes for inactivation without requiring serialisation mechanisms, and a work item to allow the queue to be processed by a CPU bound worker thread. We also keep a count of the queue depth so that we can trigger work after a number of deferred inactivations have been queued. The use of a bound workqueue with a single work depth allows the workqueue to run one work item per CPU. We queue the work item on the CPU we are currently running on, and so this essentially gives us affine per-cpu worker threads for the per-cpu queues. THis maintains the effective CPU affinity that occurs within XFS at the AG level due to all objects in a directory being local to an AG. Hence inactivation work tends to run on the same CPU that last accessed all the objects that inactivation accesses and this maintains hot CPU caches for unlink workloads. A depth of 32 inodes was chosen to match the number of inodes in an inode cluster buffer. This hopefully allows sequential allocation/unlink behaviours to defering inactivation of all the inodes in a single cluster buffer at a time, further helping maintain hot CPU and buffer cache accesses while running inactivations. A hard per-cpu queue throttle of 256 inode has been set to avoid runaway queuing when inodes that take a long to time inactivate are being processed. For example, when unlinking inodes with large numbers of extents that can take a lot of processing to free. Signed-off-by: Dave Chinner <dchinner@redhat.com> [djwong: tweak comments and tracepoints, convert opflags to state bits] Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org>
2021-08-06 18:05:39 +00:00
return false;
}
/*
* Upper bound on the number of inodes in each AG that can be queued for
* inactivation at any given time, to avoid monopolizing the workqueue.
*/
#define XFS_INODEGC_MAX_BACKLOG (4 * XFS_INODES_PER_CHUNK)
/*
* Make the frontend wait for inactivations when:
*
* - Memory shrinkers queued the inactivation worker and it hasn't finished.
xfs: per-cpu deferred inode inactivation queues Move inode inactivation to background work contexts so that it no longer runs in the context that releases the final reference to an inode. This will allow process work that ends up blocking on inactivation to continue doing work while the filesytem processes the inactivation in the background. A typical demonstration of this is unlinking an inode with lots of extents. The extents are removed during inactivation, so this blocks the process that unlinked the inode from the directory structure. By moving the inactivation to the background process, the userspace applicaiton can keep working (e.g. unlinking the next inode in the directory) while the inactivation work on the previous inode is done by a different CPU. The implementation of the queue is relatively simple. We use a per-cpu lockless linked list (llist) to queue inodes for inactivation without requiring serialisation mechanisms, and a work item to allow the queue to be processed by a CPU bound worker thread. We also keep a count of the queue depth so that we can trigger work after a number of deferred inactivations have been queued. The use of a bound workqueue with a single work depth allows the workqueue to run one work item per CPU. We queue the work item on the CPU we are currently running on, and so this essentially gives us affine per-cpu worker threads for the per-cpu queues. THis maintains the effective CPU affinity that occurs within XFS at the AG level due to all objects in a directory being local to an AG. Hence inactivation work tends to run on the same CPU that last accessed all the objects that inactivation accesses and this maintains hot CPU caches for unlink workloads. A depth of 32 inodes was chosen to match the number of inodes in an inode cluster buffer. This hopefully allows sequential allocation/unlink behaviours to defering inactivation of all the inodes in a single cluster buffer at a time, further helping maintain hot CPU and buffer cache accesses while running inactivations. A hard per-cpu queue throttle of 256 inode has been set to avoid runaway queuing when inodes that take a long to time inactivate are being processed. For example, when unlinking inodes with large numbers of extents that can take a lot of processing to free. Signed-off-by: Dave Chinner <dchinner@redhat.com> [djwong: tweak comments and tracepoints, convert opflags to state bits] Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org>
2021-08-06 18:05:39 +00:00
* - The queue depth exceeds the maximum allowable percpu backlog.
*
* Note: If the current thread is running a transaction, we don't ever want to
* wait for other transactions because that could introduce a deadlock.
*/
static inline bool
xfs_inodegc_want_flush_work(
struct xfs_inode *ip,
unsigned int items,
unsigned int shrinker_hits)
xfs: per-cpu deferred inode inactivation queues Move inode inactivation to background work contexts so that it no longer runs in the context that releases the final reference to an inode. This will allow process work that ends up blocking on inactivation to continue doing work while the filesytem processes the inactivation in the background. A typical demonstration of this is unlinking an inode with lots of extents. The extents are removed during inactivation, so this blocks the process that unlinked the inode from the directory structure. By moving the inactivation to the background process, the userspace applicaiton can keep working (e.g. unlinking the next inode in the directory) while the inactivation work on the previous inode is done by a different CPU. The implementation of the queue is relatively simple. We use a per-cpu lockless linked list (llist) to queue inodes for inactivation without requiring serialisation mechanisms, and a work item to allow the queue to be processed by a CPU bound worker thread. We also keep a count of the queue depth so that we can trigger work after a number of deferred inactivations have been queued. The use of a bound workqueue with a single work depth allows the workqueue to run one work item per CPU. We queue the work item on the CPU we are currently running on, and so this essentially gives us affine per-cpu worker threads for the per-cpu queues. THis maintains the effective CPU affinity that occurs within XFS at the AG level due to all objects in a directory being local to an AG. Hence inactivation work tends to run on the same CPU that last accessed all the objects that inactivation accesses and this maintains hot CPU caches for unlink workloads. A depth of 32 inodes was chosen to match the number of inodes in an inode cluster buffer. This hopefully allows sequential allocation/unlink behaviours to defering inactivation of all the inodes in a single cluster buffer at a time, further helping maintain hot CPU and buffer cache accesses while running inactivations. A hard per-cpu queue throttle of 256 inode has been set to avoid runaway queuing when inodes that take a long to time inactivate are being processed. For example, when unlinking inodes with large numbers of extents that can take a lot of processing to free. Signed-off-by: Dave Chinner <dchinner@redhat.com> [djwong: tweak comments and tracepoints, convert opflags to state bits] Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org>
2021-08-06 18:05:39 +00:00
{
if (current->journal_info)
return false;
if (shrinker_hits > 0)
return true;
xfs: per-cpu deferred inode inactivation queues Move inode inactivation to background work contexts so that it no longer runs in the context that releases the final reference to an inode. This will allow process work that ends up blocking on inactivation to continue doing work while the filesytem processes the inactivation in the background. A typical demonstration of this is unlinking an inode with lots of extents. The extents are removed during inactivation, so this blocks the process that unlinked the inode from the directory structure. By moving the inactivation to the background process, the userspace applicaiton can keep working (e.g. unlinking the next inode in the directory) while the inactivation work on the previous inode is done by a different CPU. The implementation of the queue is relatively simple. We use a per-cpu lockless linked list (llist) to queue inodes for inactivation without requiring serialisation mechanisms, and a work item to allow the queue to be processed by a CPU bound worker thread. We also keep a count of the queue depth so that we can trigger work after a number of deferred inactivations have been queued. The use of a bound workqueue with a single work depth allows the workqueue to run one work item per CPU. We queue the work item on the CPU we are currently running on, and so this essentially gives us affine per-cpu worker threads for the per-cpu queues. THis maintains the effective CPU affinity that occurs within XFS at the AG level due to all objects in a directory being local to an AG. Hence inactivation work tends to run on the same CPU that last accessed all the objects that inactivation accesses and this maintains hot CPU caches for unlink workloads. A depth of 32 inodes was chosen to match the number of inodes in an inode cluster buffer. This hopefully allows sequential allocation/unlink behaviours to defering inactivation of all the inodes in a single cluster buffer at a time, further helping maintain hot CPU and buffer cache accesses while running inactivations. A hard per-cpu queue throttle of 256 inode has been set to avoid runaway queuing when inodes that take a long to time inactivate are being processed. For example, when unlinking inodes with large numbers of extents that can take a lot of processing to free. Signed-off-by: Dave Chinner <dchinner@redhat.com> [djwong: tweak comments and tracepoints, convert opflags to state bits] Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org>
2021-08-06 18:05:39 +00:00
if (items > XFS_INODEGC_MAX_BACKLOG)
return true;
return false;
}
/*
* Queue a background inactivation worker if there are inodes that need to be
* inactivated and higher level xfs code hasn't disabled the background
* workers.
*/
static void
xfs_inodegc_queue(
struct xfs_inode *ip)
{
struct xfs_mount *mp = ip->i_mount;
struct xfs_inodegc *gc;
int items;
unsigned int shrinker_hits;
unsigned int cpu_nr;
unsigned long queue_delay = 1;
xfs: per-cpu deferred inode inactivation queues Move inode inactivation to background work contexts so that it no longer runs in the context that releases the final reference to an inode. This will allow process work that ends up blocking on inactivation to continue doing work while the filesytem processes the inactivation in the background. A typical demonstration of this is unlinking an inode with lots of extents. The extents are removed during inactivation, so this blocks the process that unlinked the inode from the directory structure. By moving the inactivation to the background process, the userspace applicaiton can keep working (e.g. unlinking the next inode in the directory) while the inactivation work on the previous inode is done by a different CPU. The implementation of the queue is relatively simple. We use a per-cpu lockless linked list (llist) to queue inodes for inactivation without requiring serialisation mechanisms, and a work item to allow the queue to be processed by a CPU bound worker thread. We also keep a count of the queue depth so that we can trigger work after a number of deferred inactivations have been queued. The use of a bound workqueue with a single work depth allows the workqueue to run one work item per CPU. We queue the work item on the CPU we are currently running on, and so this essentially gives us affine per-cpu worker threads for the per-cpu queues. THis maintains the effective CPU affinity that occurs within XFS at the AG level due to all objects in a directory being local to an AG. Hence inactivation work tends to run on the same CPU that last accessed all the objects that inactivation accesses and this maintains hot CPU caches for unlink workloads. A depth of 32 inodes was chosen to match the number of inodes in an inode cluster buffer. This hopefully allows sequential allocation/unlink behaviours to defering inactivation of all the inodes in a single cluster buffer at a time, further helping maintain hot CPU and buffer cache accesses while running inactivations. A hard per-cpu queue throttle of 256 inode has been set to avoid runaway queuing when inodes that take a long to time inactivate are being processed. For example, when unlinking inodes with large numbers of extents that can take a lot of processing to free. Signed-off-by: Dave Chinner <dchinner@redhat.com> [djwong: tweak comments and tracepoints, convert opflags to state bits] Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org>
2021-08-06 18:05:39 +00:00
trace_xfs_inode_set_need_inactive(ip);
spin_lock(&ip->i_flags_lock);
ip->i_flags |= XFS_NEED_INACTIVE;
spin_unlock(&ip->i_flags_lock);
cpu_nr = get_cpu();
gc = this_cpu_ptr(mp->m_inodegc);
xfs: per-cpu deferred inode inactivation queues Move inode inactivation to background work contexts so that it no longer runs in the context that releases the final reference to an inode. This will allow process work that ends up blocking on inactivation to continue doing work while the filesytem processes the inactivation in the background. A typical demonstration of this is unlinking an inode with lots of extents. The extents are removed during inactivation, so this blocks the process that unlinked the inode from the directory structure. By moving the inactivation to the background process, the userspace applicaiton can keep working (e.g. unlinking the next inode in the directory) while the inactivation work on the previous inode is done by a different CPU. The implementation of the queue is relatively simple. We use a per-cpu lockless linked list (llist) to queue inodes for inactivation without requiring serialisation mechanisms, and a work item to allow the queue to be processed by a CPU bound worker thread. We also keep a count of the queue depth so that we can trigger work after a number of deferred inactivations have been queued. The use of a bound workqueue with a single work depth allows the workqueue to run one work item per CPU. We queue the work item on the CPU we are currently running on, and so this essentially gives us affine per-cpu worker threads for the per-cpu queues. THis maintains the effective CPU affinity that occurs within XFS at the AG level due to all objects in a directory being local to an AG. Hence inactivation work tends to run on the same CPU that last accessed all the objects that inactivation accesses and this maintains hot CPU caches for unlink workloads. A depth of 32 inodes was chosen to match the number of inodes in an inode cluster buffer. This hopefully allows sequential allocation/unlink behaviours to defering inactivation of all the inodes in a single cluster buffer at a time, further helping maintain hot CPU and buffer cache accesses while running inactivations. A hard per-cpu queue throttle of 256 inode has been set to avoid runaway queuing when inodes that take a long to time inactivate are being processed. For example, when unlinking inodes with large numbers of extents that can take a lot of processing to free. Signed-off-by: Dave Chinner <dchinner@redhat.com> [djwong: tweak comments and tracepoints, convert opflags to state bits] Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org>
2021-08-06 18:05:39 +00:00
llist_add(&ip->i_gclist, &gc->list);
items = READ_ONCE(gc->items);
WRITE_ONCE(gc->items, items + 1);
shrinker_hits = READ_ONCE(gc->shrinker_hits);
xfs: per-cpu deferred inode inactivation queues Move inode inactivation to background work contexts so that it no longer runs in the context that releases the final reference to an inode. This will allow process work that ends up blocking on inactivation to continue doing work while the filesytem processes the inactivation in the background. A typical demonstration of this is unlinking an inode with lots of extents. The extents are removed during inactivation, so this blocks the process that unlinked the inode from the directory structure. By moving the inactivation to the background process, the userspace applicaiton can keep working (e.g. unlinking the next inode in the directory) while the inactivation work on the previous inode is done by a different CPU. The implementation of the queue is relatively simple. We use a per-cpu lockless linked list (llist) to queue inodes for inactivation without requiring serialisation mechanisms, and a work item to allow the queue to be processed by a CPU bound worker thread. We also keep a count of the queue depth so that we can trigger work after a number of deferred inactivations have been queued. The use of a bound workqueue with a single work depth allows the workqueue to run one work item per CPU. We queue the work item on the CPU we are currently running on, and so this essentially gives us affine per-cpu worker threads for the per-cpu queues. THis maintains the effective CPU affinity that occurs within XFS at the AG level due to all objects in a directory being local to an AG. Hence inactivation work tends to run on the same CPU that last accessed all the objects that inactivation accesses and this maintains hot CPU caches for unlink workloads. A depth of 32 inodes was chosen to match the number of inodes in an inode cluster buffer. This hopefully allows sequential allocation/unlink behaviours to defering inactivation of all the inodes in a single cluster buffer at a time, further helping maintain hot CPU and buffer cache accesses while running inactivations. A hard per-cpu queue throttle of 256 inode has been set to avoid runaway queuing when inodes that take a long to time inactivate are being processed. For example, when unlinking inodes with large numbers of extents that can take a lot of processing to free. Signed-off-by: Dave Chinner <dchinner@redhat.com> [djwong: tweak comments and tracepoints, convert opflags to state bits] Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org>
2021-08-06 18:05:39 +00:00
/*
* Ensure the list add is always seen by anyone who finds the cpumask
* bit set. This effectively gives the cpumask bit set operation
* release ordering semantics.
*/
smp_mb__before_atomic();
if (!cpumask_test_cpu(cpu_nr, &mp->m_inodegc_cpumask))
cpumask_test_and_set_cpu(cpu_nr, &mp->m_inodegc_cpumask);
/*
* We queue the work while holding the current CPU so that the work
* is scheduled to run on this CPU.
*/
if (!xfs_is_inodegc_enabled(mp)) {
put_cpu();
xfs: per-cpu deferred inode inactivation queues Move inode inactivation to background work contexts so that it no longer runs in the context that releases the final reference to an inode. This will allow process work that ends up blocking on inactivation to continue doing work while the filesytem processes the inactivation in the background. A typical demonstration of this is unlinking an inode with lots of extents. The extents are removed during inactivation, so this blocks the process that unlinked the inode from the directory structure. By moving the inactivation to the background process, the userspace applicaiton can keep working (e.g. unlinking the next inode in the directory) while the inactivation work on the previous inode is done by a different CPU. The implementation of the queue is relatively simple. We use a per-cpu lockless linked list (llist) to queue inodes for inactivation without requiring serialisation mechanisms, and a work item to allow the queue to be processed by a CPU bound worker thread. We also keep a count of the queue depth so that we can trigger work after a number of deferred inactivations have been queued. The use of a bound workqueue with a single work depth allows the workqueue to run one work item per CPU. We queue the work item on the CPU we are currently running on, and so this essentially gives us affine per-cpu worker threads for the per-cpu queues. THis maintains the effective CPU affinity that occurs within XFS at the AG level due to all objects in a directory being local to an AG. Hence inactivation work tends to run on the same CPU that last accessed all the objects that inactivation accesses and this maintains hot CPU caches for unlink workloads. A depth of 32 inodes was chosen to match the number of inodes in an inode cluster buffer. This hopefully allows sequential allocation/unlink behaviours to defering inactivation of all the inodes in a single cluster buffer at a time, further helping maintain hot CPU and buffer cache accesses while running inactivations. A hard per-cpu queue throttle of 256 inode has been set to avoid runaway queuing when inodes that take a long to time inactivate are being processed. For example, when unlinking inodes with large numbers of extents that can take a lot of processing to free. Signed-off-by: Dave Chinner <dchinner@redhat.com> [djwong: tweak comments and tracepoints, convert opflags to state bits] Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org>
2021-08-06 18:05:39 +00:00
return;
}
if (xfs_inodegc_want_queue_work(ip, items))
queue_delay = 0;
trace_xfs_inodegc_queue(mp, __return_address);
xfs: explicitly specify cpu when forcing inodegc delayed work to run immediately I've been noticing odd racing behavior in the inodegc code that could only be explained by one cpu adding an inode to its inactivation llist at the same time that another cpu is processing that cpu's llist. Preemption is disabled between get/put_cpu_ptr, so the only explanation is scheduler mayhem. I inserted the following debug code into xfs_inodegc_worker (see the next patch): ASSERT(gc->cpu == smp_processor_id()); This assertion tripped during overnight tests on the arm64 machines, but curiously not on x86_64. I think we haven't observed any resource leaks here because the lockfree list code can handle simultaneous llist_add and llist_del_all functions operating on the same list. However, the whole point of having percpu inodegc lists is to take advantage of warm memory caches by inactivating inodes on the last processor to touch the inode. The incorrect scheduling seems to occur after an inodegc worker is subjected to mod_delayed_work(). This wraps mod_delayed_work_on with WORK_CPU_UNBOUND specified as the cpu number. Unbound allows for scheduling on any cpu, not necessarily the same one that scheduled the work. Because preemption is disabled for as long as we have the gc pointer, I think it's safe to use current_cpu() (aka smp_processor_id) to queue the delayed work item on the correct cpu. Fixes: 7cf2b0f9611b ("xfs: bound maximum wait time for inodegc work") Signed-off-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2023-05-01 23:16:05 +00:00
mod_delayed_work_on(current_cpu(), mp->m_inodegc_wq, &gc->work,
queue_delay);
put_cpu();
if (xfs_inodegc_want_flush_work(ip, items, shrinker_hits)) {
xfs: per-cpu deferred inode inactivation queues Move inode inactivation to background work contexts so that it no longer runs in the context that releases the final reference to an inode. This will allow process work that ends up blocking on inactivation to continue doing work while the filesytem processes the inactivation in the background. A typical demonstration of this is unlinking an inode with lots of extents. The extents are removed during inactivation, so this blocks the process that unlinked the inode from the directory structure. By moving the inactivation to the background process, the userspace applicaiton can keep working (e.g. unlinking the next inode in the directory) while the inactivation work on the previous inode is done by a different CPU. The implementation of the queue is relatively simple. We use a per-cpu lockless linked list (llist) to queue inodes for inactivation without requiring serialisation mechanisms, and a work item to allow the queue to be processed by a CPU bound worker thread. We also keep a count of the queue depth so that we can trigger work after a number of deferred inactivations have been queued. The use of a bound workqueue with a single work depth allows the workqueue to run one work item per CPU. We queue the work item on the CPU we are currently running on, and so this essentially gives us affine per-cpu worker threads for the per-cpu queues. THis maintains the effective CPU affinity that occurs within XFS at the AG level due to all objects in a directory being local to an AG. Hence inactivation work tends to run on the same CPU that last accessed all the objects that inactivation accesses and this maintains hot CPU caches for unlink workloads. A depth of 32 inodes was chosen to match the number of inodes in an inode cluster buffer. This hopefully allows sequential allocation/unlink behaviours to defering inactivation of all the inodes in a single cluster buffer at a time, further helping maintain hot CPU and buffer cache accesses while running inactivations. A hard per-cpu queue throttle of 256 inode has been set to avoid runaway queuing when inodes that take a long to time inactivate are being processed. For example, when unlinking inodes with large numbers of extents that can take a lot of processing to free. Signed-off-by: Dave Chinner <dchinner@redhat.com> [djwong: tweak comments and tracepoints, convert opflags to state bits] Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org>
2021-08-06 18:05:39 +00:00
trace_xfs_inodegc_throttle(mp, __return_address);
flush_delayed_work(&gc->work);
xfs: per-cpu deferred inode inactivation queues Move inode inactivation to background work contexts so that it no longer runs in the context that releases the final reference to an inode. This will allow process work that ends up blocking on inactivation to continue doing work while the filesytem processes the inactivation in the background. A typical demonstration of this is unlinking an inode with lots of extents. The extents are removed during inactivation, so this blocks the process that unlinked the inode from the directory structure. By moving the inactivation to the background process, the userspace applicaiton can keep working (e.g. unlinking the next inode in the directory) while the inactivation work on the previous inode is done by a different CPU. The implementation of the queue is relatively simple. We use a per-cpu lockless linked list (llist) to queue inodes for inactivation without requiring serialisation mechanisms, and a work item to allow the queue to be processed by a CPU bound worker thread. We also keep a count of the queue depth so that we can trigger work after a number of deferred inactivations have been queued. The use of a bound workqueue with a single work depth allows the workqueue to run one work item per CPU. We queue the work item on the CPU we are currently running on, and so this essentially gives us affine per-cpu worker threads for the per-cpu queues. THis maintains the effective CPU affinity that occurs within XFS at the AG level due to all objects in a directory being local to an AG. Hence inactivation work tends to run on the same CPU that last accessed all the objects that inactivation accesses and this maintains hot CPU caches for unlink workloads. A depth of 32 inodes was chosen to match the number of inodes in an inode cluster buffer. This hopefully allows sequential allocation/unlink behaviours to defering inactivation of all the inodes in a single cluster buffer at a time, further helping maintain hot CPU and buffer cache accesses while running inactivations. A hard per-cpu queue throttle of 256 inode has been set to avoid runaway queuing when inodes that take a long to time inactivate are being processed. For example, when unlinking inodes with large numbers of extents that can take a lot of processing to free. Signed-off-by: Dave Chinner <dchinner@redhat.com> [djwong: tweak comments and tracepoints, convert opflags to state bits] Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org>
2021-08-06 18:05:39 +00:00
}
}
/*
* We set the inode flag atomically with the radix tree tag. Once we get tag
* lookups on the radix tree, this inode flag can go away.
*
* We always use background reclaim here because even if the inode is clean, it
* still may be under IO and hence we have wait for IO completion to occur
* before we can reclaim the inode. The background reclaim path handles this
* more efficiently than we can here, so simply let background reclaim tear down
* all inodes.
*/
void
xfs_inode_mark_reclaimable(
struct xfs_inode *ip)
{
struct xfs_mount *mp = ip->i_mount;
bool need_inactive;
XFS_STATS_INC(mp, vn_reclaim);
/*
* We should never get here with any of the reclaim flags already set.
*/
ASSERT_ALWAYS(!xfs_iflags_test(ip, XFS_ALL_IRECLAIM_FLAGS));
need_inactive = xfs_inode_needs_inactive(ip);
if (need_inactive) {
xfs_inodegc_queue(ip);
return;
}
/* Going straight to reclaim, so drop the dquots. */
xfs_qm_dqdetach(ip);
xfs_inodegc_set_reclaimable(ip);
}
/*
* Register a phony shrinker so that we can run background inodegc sooner when
* there's memory pressure. Inactivation does not itself free any memory but
* it does make inodes reclaimable, which eventually frees memory.
*
* The count function, seek value, and batch value are crafted to trigger the
* scan function during the second round of scanning. Hopefully this means
* that we reclaimed enough memory that initiating metadata transactions won't
* make things worse.
*/
#define XFS_INODEGC_SHRINKER_COUNT (1UL << DEF_PRIORITY)
#define XFS_INODEGC_SHRINKER_BATCH ((XFS_INODEGC_SHRINKER_COUNT / 2) + 1)
static unsigned long
xfs_inodegc_shrinker_count(
struct shrinker *shrink,
struct shrink_control *sc)
{
xfs: dynamically allocate the xfs-inodegc shrinker In preparation for implementing lockless slab shrink, use new APIs to dynamically allocate the xfs-inodegc shrinker, so that it can be freed asynchronously via RCU. Then it doesn't need to wait for RCU read-side critical section when releasing the struct xfs_mount. Link: https://lkml.kernel.org/r/20230911094444.68966-36-zhengqi.arch@bytedance.com Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com> Reviewed-by: Muchun Song <songmuchun@bytedance.com> Cc: Chandan Babu R <chandan.babu@oracle.com> Cc: "Darrick J. Wong" <djwong@kernel.org> Cc: Abhinav Kumar <quic_abhinavk@quicinc.com> Cc: Alasdair Kergon <agk@redhat.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com> Cc: Andreas Dilger <adilger.kernel@dilger.ca> Cc: Andreas Gruenbacher <agruenba@redhat.com> Cc: Anna Schumaker <anna@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Bob Peterson <rpeterso@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Carlos Llamas <cmllamas@google.com> Cc: Chao Yu <chao@kernel.org> Cc: Chris Mason <clm@fb.com> Cc: Christian Brauner <brauner@kernel.org> Cc: Christian Koenig <christian.koenig@amd.com> Cc: Chuck Lever <cel@kernel.org> Cc: Coly Li <colyli@suse.de> Cc: Dai Ngo <Dai.Ngo@oracle.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Dave Chinner <david@fromorbit.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David Airlie <airlied@gmail.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Sterba <dsterba@suse.com> Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Cc: Gao Xiang <hsiangkao@linux.alibaba.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Huang Rui <ray.huang@amd.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jaegeuk Kim <jaegeuk@kernel.org> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Jan Kara <jack@suse.cz> Cc: Jason Wang <jasowang@redhat.com> Cc: Jeff Layton <jlayton@kernel.org> Cc: Jeffle Xu <jefflexu@linux.alibaba.com> Cc: Joel Fernandes (Google) <joel@joelfernandes.org> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Josef Bacik <josef@toxicpanda.com> Cc: Juergen Gross <jgross@suse.com> Cc: Kent Overstreet <kent.overstreet@gmail.com> Cc: Kirill Tkhai <tkhai@ya.ru> Cc: Marijn Suijten <marijn.suijten@somainline.org> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Mike Snitzer <snitzer@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Muchun Song <muchun.song@linux.dev> Cc: Nadav Amit <namit@vmware.com> Cc: Neil Brown <neilb@suse.de> Cc: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com> Cc: Olga Kornievskaia <kolga@netapp.com> Cc: Paul E. McKenney <paulmck@kernel.org> Cc: Richard Weinberger <richard@nod.at> Cc: Rob Clark <robdclark@gmail.com> Cc: Rob Herring <robh@kernel.org> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: Sean Paul <sean@poorly.run> Cc: Sergey Senozhatsky <senozhatsky@chromium.org> Cc: Song Liu <song@kernel.org> Cc: Stefano Stabellini <sstabellini@kernel.org> Cc: Steven Price <steven.price@arm.com> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com> Cc: Tom Talpey <tom@talpey.com> Cc: Trond Myklebust <trond.myklebust@hammerspace.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Cc: Yue Hu <huyue2@coolpad.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-09-11 09:44:34 +00:00
struct xfs_mount *mp = shrink->private_data;
struct xfs_inodegc *gc;
int cpu;
if (!xfs_is_inodegc_enabled(mp))
return 0;
for_each_cpu(cpu, &mp->m_inodegc_cpumask) {
gc = per_cpu_ptr(mp->m_inodegc, cpu);
if (!llist_empty(&gc->list))
return XFS_INODEGC_SHRINKER_COUNT;
}
return 0;
}
static unsigned long
xfs_inodegc_shrinker_scan(
struct shrinker *shrink,
struct shrink_control *sc)
{
xfs: dynamically allocate the xfs-inodegc shrinker In preparation for implementing lockless slab shrink, use new APIs to dynamically allocate the xfs-inodegc shrinker, so that it can be freed asynchronously via RCU. Then it doesn't need to wait for RCU read-side critical section when releasing the struct xfs_mount. Link: https://lkml.kernel.org/r/20230911094444.68966-36-zhengqi.arch@bytedance.com Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com> Reviewed-by: Muchun Song <songmuchun@bytedance.com> Cc: Chandan Babu R <chandan.babu@oracle.com> Cc: "Darrick J. Wong" <djwong@kernel.org> Cc: Abhinav Kumar <quic_abhinavk@quicinc.com> Cc: Alasdair Kergon <agk@redhat.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com> Cc: Andreas Dilger <adilger.kernel@dilger.ca> Cc: Andreas Gruenbacher <agruenba@redhat.com> Cc: Anna Schumaker <anna@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Bob Peterson <rpeterso@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Carlos Llamas <cmllamas@google.com> Cc: Chao Yu <chao@kernel.org> Cc: Chris Mason <clm@fb.com> Cc: Christian Brauner <brauner@kernel.org> Cc: Christian Koenig <christian.koenig@amd.com> Cc: Chuck Lever <cel@kernel.org> Cc: Coly Li <colyli@suse.de> Cc: Dai Ngo <Dai.Ngo@oracle.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Dave Chinner <david@fromorbit.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David Airlie <airlied@gmail.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Sterba <dsterba@suse.com> Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Cc: Gao Xiang <hsiangkao@linux.alibaba.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Huang Rui <ray.huang@amd.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jaegeuk Kim <jaegeuk@kernel.org> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Jan Kara <jack@suse.cz> Cc: Jason Wang <jasowang@redhat.com> Cc: Jeff Layton <jlayton@kernel.org> Cc: Jeffle Xu <jefflexu@linux.alibaba.com> Cc: Joel Fernandes (Google) <joel@joelfernandes.org> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Josef Bacik <josef@toxicpanda.com> Cc: Juergen Gross <jgross@suse.com> Cc: Kent Overstreet <kent.overstreet@gmail.com> Cc: Kirill Tkhai <tkhai@ya.ru> Cc: Marijn Suijten <marijn.suijten@somainline.org> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Mike Snitzer <snitzer@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Muchun Song <muchun.song@linux.dev> Cc: Nadav Amit <namit@vmware.com> Cc: Neil Brown <neilb@suse.de> Cc: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com> Cc: Olga Kornievskaia <kolga@netapp.com> Cc: Paul E. McKenney <paulmck@kernel.org> Cc: Richard Weinberger <richard@nod.at> Cc: Rob Clark <robdclark@gmail.com> Cc: Rob Herring <robh@kernel.org> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: Sean Paul <sean@poorly.run> Cc: Sergey Senozhatsky <senozhatsky@chromium.org> Cc: Song Liu <song@kernel.org> Cc: Stefano Stabellini <sstabellini@kernel.org> Cc: Steven Price <steven.price@arm.com> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com> Cc: Tom Talpey <tom@talpey.com> Cc: Trond Myklebust <trond.myklebust@hammerspace.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Cc: Yue Hu <huyue2@coolpad.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-09-11 09:44:34 +00:00
struct xfs_mount *mp = shrink->private_data;
struct xfs_inodegc *gc;
int cpu;
bool no_items = true;
if (!xfs_is_inodegc_enabled(mp))
return SHRINK_STOP;
trace_xfs_inodegc_shrinker_scan(mp, sc, __return_address);
for_each_cpu(cpu, &mp->m_inodegc_cpumask) {
gc = per_cpu_ptr(mp->m_inodegc, cpu);
if (!llist_empty(&gc->list)) {
unsigned int h = READ_ONCE(gc->shrinker_hits);
WRITE_ONCE(gc->shrinker_hits, h + 1);
mod_delayed_work_on(cpu, mp->m_inodegc_wq, &gc->work, 0);
no_items = false;
}
}
/*
* If there are no inodes to inactivate, we don't want the shrinker
* to think there's deferred work to call us back about.
*/
if (no_items)
return LONG_MAX;
return SHRINK_STOP;
}
/* Register a shrinker so we can accelerate inodegc and throttle queuing. */
int
xfs_inodegc_register_shrinker(
struct xfs_mount *mp)
{
xfs: dynamically allocate the xfs-inodegc shrinker In preparation for implementing lockless slab shrink, use new APIs to dynamically allocate the xfs-inodegc shrinker, so that it can be freed asynchronously via RCU. Then it doesn't need to wait for RCU read-side critical section when releasing the struct xfs_mount. Link: https://lkml.kernel.org/r/20230911094444.68966-36-zhengqi.arch@bytedance.com Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com> Reviewed-by: Muchun Song <songmuchun@bytedance.com> Cc: Chandan Babu R <chandan.babu@oracle.com> Cc: "Darrick J. Wong" <djwong@kernel.org> Cc: Abhinav Kumar <quic_abhinavk@quicinc.com> Cc: Alasdair Kergon <agk@redhat.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com> Cc: Andreas Dilger <adilger.kernel@dilger.ca> Cc: Andreas Gruenbacher <agruenba@redhat.com> Cc: Anna Schumaker <anna@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Bob Peterson <rpeterso@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Carlos Llamas <cmllamas@google.com> Cc: Chao Yu <chao@kernel.org> Cc: Chris Mason <clm@fb.com> Cc: Christian Brauner <brauner@kernel.org> Cc: Christian Koenig <christian.koenig@amd.com> Cc: Chuck Lever <cel@kernel.org> Cc: Coly Li <colyli@suse.de> Cc: Dai Ngo <Dai.Ngo@oracle.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Dave Chinner <david@fromorbit.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David Airlie <airlied@gmail.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Sterba <dsterba@suse.com> Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Cc: Gao Xiang <hsiangkao@linux.alibaba.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Huang Rui <ray.huang@amd.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jaegeuk Kim <jaegeuk@kernel.org> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Jan Kara <jack@suse.cz> Cc: Jason Wang <jasowang@redhat.com> Cc: Jeff Layton <jlayton@kernel.org> Cc: Jeffle Xu <jefflexu@linux.alibaba.com> Cc: Joel Fernandes (Google) <joel@joelfernandes.org> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Josef Bacik <josef@toxicpanda.com> Cc: Juergen Gross <jgross@suse.com> Cc: Kent Overstreet <kent.overstreet@gmail.com> Cc: Kirill Tkhai <tkhai@ya.ru> Cc: Marijn Suijten <marijn.suijten@somainline.org> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Mike Snitzer <snitzer@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Muchun Song <muchun.song@linux.dev> Cc: Nadav Amit <namit@vmware.com> Cc: Neil Brown <neilb@suse.de> Cc: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com> Cc: Olga Kornievskaia <kolga@netapp.com> Cc: Paul E. McKenney <paulmck@kernel.org> Cc: Richard Weinberger <richard@nod.at> Cc: Rob Clark <robdclark@gmail.com> Cc: Rob Herring <robh@kernel.org> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: Sean Paul <sean@poorly.run> Cc: Sergey Senozhatsky <senozhatsky@chromium.org> Cc: Song Liu <song@kernel.org> Cc: Stefano Stabellini <sstabellini@kernel.org> Cc: Steven Price <steven.price@arm.com> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com> Cc: Tom Talpey <tom@talpey.com> Cc: Trond Myklebust <trond.myklebust@hammerspace.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Cc: Yue Hu <huyue2@coolpad.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-09-11 09:44:34 +00:00
mp->m_inodegc_shrinker = shrinker_alloc(SHRINKER_NONSLAB,
"xfs-inodegc:%s",
mp->m_super->s_id);
if (!mp->m_inodegc_shrinker)
return -ENOMEM;
mp->m_inodegc_shrinker->count_objects = xfs_inodegc_shrinker_count;
mp->m_inodegc_shrinker->scan_objects = xfs_inodegc_shrinker_scan;
mp->m_inodegc_shrinker->seeks = 0;
mp->m_inodegc_shrinker->batch = XFS_INODEGC_SHRINKER_BATCH;
mp->m_inodegc_shrinker->private_data = mp;
xfs: dynamically allocate the xfs-inodegc shrinker In preparation for implementing lockless slab shrink, use new APIs to dynamically allocate the xfs-inodegc shrinker, so that it can be freed asynchronously via RCU. Then it doesn't need to wait for RCU read-side critical section when releasing the struct xfs_mount. Link: https://lkml.kernel.org/r/20230911094444.68966-36-zhengqi.arch@bytedance.com Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com> Reviewed-by: Muchun Song <songmuchun@bytedance.com> Cc: Chandan Babu R <chandan.babu@oracle.com> Cc: "Darrick J. Wong" <djwong@kernel.org> Cc: Abhinav Kumar <quic_abhinavk@quicinc.com> Cc: Alasdair Kergon <agk@redhat.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com> Cc: Andreas Dilger <adilger.kernel@dilger.ca> Cc: Andreas Gruenbacher <agruenba@redhat.com> Cc: Anna Schumaker <anna@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Bob Peterson <rpeterso@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Carlos Llamas <cmllamas@google.com> Cc: Chao Yu <chao@kernel.org> Cc: Chris Mason <clm@fb.com> Cc: Christian Brauner <brauner@kernel.org> Cc: Christian Koenig <christian.koenig@amd.com> Cc: Chuck Lever <cel@kernel.org> Cc: Coly Li <colyli@suse.de> Cc: Dai Ngo <Dai.Ngo@oracle.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Dave Chinner <david@fromorbit.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David Airlie <airlied@gmail.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Sterba <dsterba@suse.com> Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Cc: Gao Xiang <hsiangkao@linux.alibaba.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Huang Rui <ray.huang@amd.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jaegeuk Kim <jaegeuk@kernel.org> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Jan Kara <jack@suse.cz> Cc: Jason Wang <jasowang@redhat.com> Cc: Jeff Layton <jlayton@kernel.org> Cc: Jeffle Xu <jefflexu@linux.alibaba.com> Cc: Joel Fernandes (Google) <joel@joelfernandes.org> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Josef Bacik <josef@toxicpanda.com> Cc: Juergen Gross <jgross@suse.com> Cc: Kent Overstreet <kent.overstreet@gmail.com> Cc: Kirill Tkhai <tkhai@ya.ru> Cc: Marijn Suijten <marijn.suijten@somainline.org> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Mike Snitzer <snitzer@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Muchun Song <muchun.song@linux.dev> Cc: Nadav Amit <namit@vmware.com> Cc: Neil Brown <neilb@suse.de> Cc: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com> Cc: Olga Kornievskaia <kolga@netapp.com> Cc: Paul E. McKenney <paulmck@kernel.org> Cc: Richard Weinberger <richard@nod.at> Cc: Rob Clark <robdclark@gmail.com> Cc: Rob Herring <robh@kernel.org> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: Sean Paul <sean@poorly.run> Cc: Sergey Senozhatsky <senozhatsky@chromium.org> Cc: Song Liu <song@kernel.org> Cc: Stefano Stabellini <sstabellini@kernel.org> Cc: Steven Price <steven.price@arm.com> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com> Cc: Tom Talpey <tom@talpey.com> Cc: Trond Myklebust <trond.myklebust@hammerspace.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Cc: Yue Hu <huyue2@coolpad.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-09-11 09:44:34 +00:00
shrinker_register(mp->m_inodegc_shrinker);
xfs: dynamically allocate the xfs-inodegc shrinker In preparation for implementing lockless slab shrink, use new APIs to dynamically allocate the xfs-inodegc shrinker, so that it can be freed asynchronously via RCU. Then it doesn't need to wait for RCU read-side critical section when releasing the struct xfs_mount. Link: https://lkml.kernel.org/r/20230911094444.68966-36-zhengqi.arch@bytedance.com Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com> Reviewed-by: Muchun Song <songmuchun@bytedance.com> Cc: Chandan Babu R <chandan.babu@oracle.com> Cc: "Darrick J. Wong" <djwong@kernel.org> Cc: Abhinav Kumar <quic_abhinavk@quicinc.com> Cc: Alasdair Kergon <agk@redhat.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com> Cc: Andreas Dilger <adilger.kernel@dilger.ca> Cc: Andreas Gruenbacher <agruenba@redhat.com> Cc: Anna Schumaker <anna@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Bob Peterson <rpeterso@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Carlos Llamas <cmllamas@google.com> Cc: Chao Yu <chao@kernel.org> Cc: Chris Mason <clm@fb.com> Cc: Christian Brauner <brauner@kernel.org> Cc: Christian Koenig <christian.koenig@amd.com> Cc: Chuck Lever <cel@kernel.org> Cc: Coly Li <colyli@suse.de> Cc: Dai Ngo <Dai.Ngo@oracle.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Dave Chinner <david@fromorbit.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David Airlie <airlied@gmail.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Sterba <dsterba@suse.com> Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Cc: Gao Xiang <hsiangkao@linux.alibaba.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Huang Rui <ray.huang@amd.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jaegeuk Kim <jaegeuk@kernel.org> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Jan Kara <jack@suse.cz> Cc: Jason Wang <jasowang@redhat.com> Cc: Jeff Layton <jlayton@kernel.org> Cc: Jeffle Xu <jefflexu@linux.alibaba.com> Cc: Joel Fernandes (Google) <joel@joelfernandes.org> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Josef Bacik <josef@toxicpanda.com> Cc: Juergen Gross <jgross@suse.com> Cc: Kent Overstreet <kent.overstreet@gmail.com> Cc: Kirill Tkhai <tkhai@ya.ru> Cc: Marijn Suijten <marijn.suijten@somainline.org> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Mike Snitzer <snitzer@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Muchun Song <muchun.song@linux.dev> Cc: Nadav Amit <namit@vmware.com> Cc: Neil Brown <neilb@suse.de> Cc: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com> Cc: Olga Kornievskaia <kolga@netapp.com> Cc: Paul E. McKenney <paulmck@kernel.org> Cc: Richard Weinberger <richard@nod.at> Cc: Rob Clark <robdclark@gmail.com> Cc: Rob Herring <robh@kernel.org> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: Sean Paul <sean@poorly.run> Cc: Sergey Senozhatsky <senozhatsky@chromium.org> Cc: Song Liu <song@kernel.org> Cc: Stefano Stabellini <sstabellini@kernel.org> Cc: Steven Price <steven.price@arm.com> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com> Cc: Tom Talpey <tom@talpey.com> Cc: Trond Myklebust <trond.myklebust@hammerspace.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Cc: Yue Hu <huyue2@coolpad.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-09-11 09:44:34 +00:00
return 0;
}