Minki/linux
1
0
Fork 1
mirror of https://github.com/torvalds/linux.git synced 2024-12-12 14:12:51 +00:00
Code Issues Packages Projects Releases Wiki Activity
b15bd3e621
linux/drivers/scsi/sd.h

319 lines
8.2 KiB
C
Raw Normal View History

License cleanup: add SPDX GPL-2.0 license identifier to files with no license Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 14:07:57 +00:00
/* SPDX-License-Identifier: GPL-2.0 */
[SCSI] sd: make printing use a common prefix Make SCSI disk printing more consistent: - Define sd_printk(), sd_print_sense_hdr() and sd_print_result() - Move relevant header bits into sd.h - Remove all the legacy disk_name passing and use scsi_disk pointers where possible - Switch printk() lines to the new sd_ functions so that output is consistent Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-02-28 03:40:55 +00:00
#ifndef _SCSI_DISK_H
#define _SCSI_DISK_H
/*
* More than enough for everybody ;) The huge number of majors
* is a leftover from 16bit dev_t days, we don't really need that
* much numberspace.
*/
#define SD_MAJORS 16
/*
* Time out in seconds for disks and Magneto-opticals (which are slower).
*/
#define SD_TIMEOUT (30 * HZ)
#define SD_MOD_TIMEOUT (75 * HZ)
[SCSI] Derive the FLUSH_TIMEOUT from the basic I/O timeout Rather than having a separate constant for specifying the timeout on FLUSH operations, use the basic I/O timeout value that is already configurable on a per target basis to derive the FLUSH timeout. Looking at the current definitions of these timeout values, the FLUSH operation is supposed to have a value that is twice the normal timeout value. This patch preserves this relationship while leveraging the flexibility of specifying the I/O timeout. Based on a prior patch by KY Srinivasan <kys@microsoft.com> Reviewed-by: KY Srinivasan <kys@microsoft.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-10-04 21:42:24 +00:00
/*
* Flush timeout is a multiplier over the standard device timeout which is
* user modifiable via sysfs but initially set to SD_TIMEOUT
*/
#define SD_FLUSH_TIMEOUT_MULTIPLIER 2
[SCSI] sd: Implement support for WRITE SAME Implement support for WRITE SAME(10) and WRITE SAME(16) in the SCSI disk driver. - We set the default maximum to 0xFFFF because there are several devices out there that only support two-byte block counts even with WRITE SAME(16). We only enable transfers bigger than 0xFFFF if the device explicitly reports MAXIMUM WRITE SAME LENGTH in the BLOCK LIMITS VPD. - max_write_same_blocks can be overriden per-device basis in sysfs. - The UNMAP discovery heuristics remain unchanged but the discard limits are tweaked to match the "real" WRITE SAME commands. - In the error handling logic we now distinguish between WRITE SAME with and without UNMAP set. The discovery process heuristics are: - If the device reports a SCSI level of SPC-3 or greater we'll issue READ SUPPORTED OPERATION CODES to find out whether WRITE SAME(16) is supported. If that's the case we will use it. - If the device supports the block limits VPD and reports a MAXIMUM WRITE SAME LENGTH bigger than 0xFFFF we will use WRITE SAME(16). - Otherwise we will use WRITE SAME(10) unless the target LBA is beyond 0xFFFFFFFF or the block count exceeds 0xFFFF. - no_write_same is set for ATA, FireWire and USB. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Mike Snitzer <snitzer@redhat.com> Reviewed-by: Jeff Garzik <jgarzik@redhat.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-09-18 16:19:32 +00:00
#define SD_WRITE_SAME_TIMEOUT (120 * HZ)
[SCSI] sd: make printing use a common prefix Make SCSI disk printing more consistent: - Define sd_printk(), sd_print_sense_hdr() and sd_print_result() - Move relevant header bits into sd.h - Remove all the legacy disk_name passing and use scsi_disk pointers where possible - Switch printk() lines to the new sd_ functions so that output is consistent Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-02-28 03:40:55 +00:00
/*
* Number of allowed retries
*/
#define SD_MAX_RETRIES 5
#define SD_PASSTHROUGH_RETRIES 1
[SCSI] Handle disk devices which can not process medium access commands We have experienced several devices which fail in a fashion we do not currently handle gracefully in SCSI. After a failure these devices will respond to the SCSI primary command set (INQUIRY, TEST UNIT READY, etc.) but any command accessing the storage medium will time out. The following patch adds an callback that can be used by upper level drivers to inspect the results of an error handling command. This in turn has been used to implement additional checking in the SCSI disk driver. If a medium access command fails twice but TEST UNIT READY succeeds both times in the subsequent error handling we will offline the device. The maximum number of failed commands required to take a device offline can be tweaked in sysfs. Also add a new error flag to scsi_debug which allows this scenario to be easily reproduced. [jejb: fix up integer parsing to use kstrtouint] Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-02-09 18:48:53 +00:00
#define SD_MAX_MEDIUM_TIMEOUTS 2
[SCSI] sd: make printing use a common prefix Make SCSI disk printing more consistent: - Define sd_printk(), sd_print_sense_hdr() and sd_print_result() - Move relevant header bits into sd.h - Remove all the legacy disk_name passing and use scsi_disk pointers where possible - Switch printk() lines to the new sd_ functions so that output is consistent Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-02-28 03:40:55 +00:00
/*
* Size of the initial data buffer for mode and read capacity data
*/
#define SD_BUF_SIZE 512
Re-introduce "[SCSI] extend the last_sector_bug flag to cover more sectors" This re-introduces commit 2b142900784c6e38c8d39fa57d5f95ef08e735d8, which was reverted due to the regression it caused by commit fca082c9f1e11ec07efa8d2f9f13688521253f36. That regression was not root-caused by the original commit, it was just uncovered by it, and the real fix was done by Alan Stern in commit 580da34847488b404218d1d7f53b156f245f5555 ("Fix USB storage hang on command abort"). We can thus re-introduce the change that was confirmed by Alan Jenkins to be still required by his odd card reader. Cc: Alan Jenkins <alan-jenkins@tuffmail.co.uk> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-08-06 04:42:21 +00:00
/*
* Number of sectors at the end of the device to avoid multi-sector
* accesses to in the case of last_sector_bug
*/
#define SD_LAST_BUGGY_SECTORS 8
[SCSI] sd: Support disks formatted with DIF Type 2 Disks formatted with DIF Type 2 reject READ/WRITE 6/10/12/16 commands when protection is enabled. Only the 32-byte variants are supported. Implement support for issusing 32-byte READ/WRITE and enable Type 2 drives in the protection type detection logic. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-09-20 20:49:38 +00:00
enum {
SD_EXT_CDB_SIZE = 32, /* Extended CDB size */
SD_MEMPOOL_SIZE = 2, /* CDB pool size */
};
[SCSI] sd: Implement support for WRITE SAME Implement support for WRITE SAME(10) and WRITE SAME(16) in the SCSI disk driver. - We set the default maximum to 0xFFFF because there are several devices out there that only support two-byte block counts even with WRITE SAME(16). We only enable transfers bigger than 0xFFFF if the device explicitly reports MAXIMUM WRITE SAME LENGTH in the BLOCK LIMITS VPD. - max_write_same_blocks can be overriden per-device basis in sysfs. - The UNMAP discovery heuristics remain unchanged but the discard limits are tweaked to match the "real" WRITE SAME commands. - In the error handling logic we now distinguish between WRITE SAME with and without UNMAP set. The discovery process heuristics are: - If the device reports a SCSI level of SPC-3 or greater we'll issue READ SUPPORTED OPERATION CODES to find out whether WRITE SAME(16) is supported. If that's the case we will use it. - If the device supports the block limits VPD and reports a MAXIMUM WRITE SAME LENGTH bigger than 0xFFFF we will use WRITE SAME(16). - Otherwise we will use WRITE SAME(10) unless the target LBA is beyond 0xFFFFFFFF or the block count exceeds 0xFFFF. - no_write_same is set for ATA, FireWire and USB. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Mike Snitzer <snitzer@redhat.com> Reviewed-by: Jeff Garzik <jgarzik@redhat.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-09-18 16:19:32 +00:00
enum {
sd: Limit transfer length Until now the per-command transfer length has exclusively been gated by the max_sectors parameter in the scsi_host template. Given that the size of this parameter has been bumped to an unsigned int we have to be careful not to exceed the target device's capabilities. If the if the device specifies a Maximum Transfer Length in the Block Limits VPD we'll use that value. Otherwise we'll use 0xffffffff for devices that have use_16_for_rw set and 0xffff for the rest. We then combine the chosen disk limit with max_sectors in the host template. The smaller of the two will be used to set the max_hw_sectors queue limit. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Ewan D. Milne <emilne@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-06-03 22:45:51 +00:00
SD_DEF_XFER_BLOCKS = 0xffff,
SD_MAX_XFER_BLOCKS = 0xffffffff,
[SCSI] sd: Implement support for WRITE SAME Implement support for WRITE SAME(10) and WRITE SAME(16) in the SCSI disk driver. - We set the default maximum to 0xFFFF because there are several devices out there that only support two-byte block counts even with WRITE SAME(16). We only enable transfers bigger than 0xFFFF if the device explicitly reports MAXIMUM WRITE SAME LENGTH in the BLOCK LIMITS VPD. - max_write_same_blocks can be overriden per-device basis in sysfs. - The UNMAP discovery heuristics remain unchanged but the discard limits are tweaked to match the "real" WRITE SAME commands. - In the error handling logic we now distinguish between WRITE SAME with and without UNMAP set. The discovery process heuristics are: - If the device reports a SCSI level of SPC-3 or greater we'll issue READ SUPPORTED OPERATION CODES to find out whether WRITE SAME(16) is supported. If that's the case we will use it. - If the device supports the block limits VPD and reports a MAXIMUM WRITE SAME LENGTH bigger than 0xFFFF we will use WRITE SAME(16). - Otherwise we will use WRITE SAME(10) unless the target LBA is beyond 0xFFFFFFFF or the block count exceeds 0xFFFF. - no_write_same is set for ATA, FireWire and USB. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Mike Snitzer <snitzer@redhat.com> Reviewed-by: Jeff Garzik <jgarzik@redhat.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-09-18 16:19:32 +00:00
SD_MAX_WS10_BLOCKS = 0xffff,
SD_MAX_WS16_BLOCKS = 0x7fffff,
};
[SCSI] sd: Logical Block Provisioning update SBC3r26 contains many changes to the Logical Block Provisioning interfaces (formerly known as Thin Provisioning ditto). This patch implements support for both the old and new schemes using the same heuristic as before (whether the LBP VPD page is present). The new code also allows the provisioning mode (i.e. choice of command) to be overridden on a per-device basis via sysfs. Two additional modes are supported in this version: - WRITE SAME(10) with the UNMAP bit set - WRITE SAME(10) without the UNMAP bit set. This allows us to support devices that predate the TP/LBP enhancements in SBC3 and which work by way zero-detection Switching between modes has been consolidated in a helper function that also updates the block layer topology according to the limitations of the chosen command. I experimented with trying WRITE SAME(16) if UNMAP fails, WRITE SAME(10) if WRITE SAME(16) fails, etc. but found several devices that got cranky. So for now we'll disable discard if one of the commands fail. The user still has the option of selecting a different mode in sysfs. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-03-08 07:07:15 +00:00
enum {
SD_LBP_FULL = 0, /* Full logical block provisioning */
SD_LBP_UNMAP, /* Use UNMAP command */
SD_LBP_WS16, /* Use WRITE SAME(16) with UNMAP bit */
SD_LBP_WS10, /* Use WRITE SAME(10) with UNMAP bit */
SD_LBP_ZERO, /* Use WRITE SAME(10) with zero payload */
SD_LBP_DISABLE, /* Discard disabled due to failed cmd */
};
scsi: sd: Separate zeroout and discard command choices Now that zeroout and discards are distinct operations we need to separate the policy of choosing the appropriate command. Create a zeroing_mode which can be one of: write: Zeroout assist not present, use regular WRITE writesame: Allow WRITE SAME(10/16) with a zeroed payload writesame_16_unmap: Allow WRITE SAME(16) with UNMAP writesame_10_unmap: Allow WRITE SAME(10) with UNMAP The last two are conditional on the device being thin provisioned with LBPRZ=1 and LBPWS=1 or LBPWS10=1 respectively. Whether to set the UNMAP bit or not depends on the REQ_NOUNMAP flag. And if none of the _unmap variants are supported, regular WRITE SAME will be used if the device supports it. The zeroout_mode is exported in sysfs and the detected mode for a given device can be overridden using the string constants above. With this change in place we can now issue WRITE SAME(16) with UNMAP set for block zeroing applications that require hard guarantees and logical_block_size granularity. And at the same time use the UNMAP command with the device's preferred granulary and alignment for discard operations. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-05 17:21:24 +00:00
enum {
SD_ZERO_WRITE = 0, /* Use WRITE(10/16) command */
SD_ZERO_WS, /* Use WRITE SAME(10/16) command */
SD_ZERO_WS16_UNMAP, /* Use WRITE SAME(16) with UNMAP */
SD_ZERO_WS10_UNMAP, /* Use WRITE SAME(10) with UNMAP */
};
[SCSI] sd: make printing use a common prefix Make SCSI disk printing more consistent: - Define sd_printk(), sd_print_sense_hdr() and sd_print_result() - Move relevant header bits into sd.h - Remove all the legacy disk_name passing and use scsi_disk pointers where possible - Switch printk() lines to the new sd_ functions so that output is consistent Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-02-28 03:40:55 +00:00
struct scsi_disk {
struct scsi_driver *driver; /* always &sd_template */
struct scsi_device *device;
SCSI: convert struct class_device to struct device It's big, but there doesn't seem to be a way to split it up smaller... Signed-off-by: Tony Jones <tonyj@suse.de> Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Cc: Roland Dreier <rolandd@cisco.com> Cc: Sean Hefty <sean.hefty@intel.com> Cc: Hal Rosenstock <hal.rosenstock@gmail.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-21 23:13:36 +00:00
struct device dev;
[SCSI] sd: make printing use a common prefix Make SCSI disk printing more consistent: - Define sd_printk(), sd_print_sense_hdr() and sd_print_result() - Move relevant header bits into sd.h - Remove all the legacy disk_name passing and use scsi_disk pointers where possible - Switch printk() lines to the new sd_ functions so that output is consistent Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-02-28 03:40:55 +00:00
struct gendisk *disk;
sd: add support for TCG OPAL self encrypting disks Just wire up the generic TCG OPAL infrastructure to the SCSI disk driver and the Security In/Out commands. Note that I don't know of any actual SCSI disks that do support TCG OPAL, but this is required to support ATA disks through libata. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2017-06-19 12:26:46 +00:00
struct opal_dev *opal_dev;
sd: Implement support for ZBC devices Implement ZBC support functions to setup zoned disks, both host-managed and host-aware models. Only zoned disks that satisfy the following conditions are supported: 1) All zones are the same size, with the exception of an eventual last smaller runt zone. 2) For host-managed disks, reads are unrestricted (reads are not failed due to zone or write pointer alignement constraints). Zoned disks that do not satisfy these 2 conditions are setup with a capacity of 0 to prevent their use. The function sd_zbc_read_zones, called from sd_revalidate_disk, checks that the device satisfies the above two constraints. This function may also change the disk capacity previously set by sd_read_capacity for devices reporting only the capacity of conventional zones at the beginning of the LBA range (i.e. devices reporting rc_basis set to 0). The capacity message output was moved out of sd_read_capacity into a new function sd_print_capacity to include this eventual capacity change by sd_zbc_read_zones. This new function also includes a call to sd_zbc_print_zones to display the number of zones and zone size of the device. Signed-off-by: Hannes Reinecke <hare@suse.de> [Damien: * Removed zone cache support * Removed mapping of discard to reset write pointer command * Modified sd_zbc_read_zones to include checks that the device satisfies the kernel constraints * Implemeted REPORT ZONES setup and post-processing based on code from Shaun Tancheff <shaun.tancheff@seagate.com> * Removed confusing use of 512B sector units in functions interface] Signed-off-by: Damien Le Moal <damien.lemoal@hgst.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Shaun Tancheff <shaun.tancheff@seagate.com> Tested-by: Shaun Tancheff <shaun.tancheff@seagate.com> Acked-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-10-18 06:40:34 +00:00
#ifdef CONFIG_BLK_DEV_ZONED
unsigned int nr_zones;
unsigned int zone_blocks;
unsigned int zone_shift;
unsigned int zones_optimal_open;
unsigned int zones_optimal_nonseq;
unsigned int zones_max_open;
#endif
scsi/sd: remove big kernel lock Every user of the BKL in the sd driver is the result of the pushdown from the block layer into the open/close/ioctl functions. The only place that used to rely on the BKL is the sdkp->openers variable, which gets converted into an atomic_t. Nothing else seems to rely on the BKL, since the functions do not touch global data without holding another lock, and the open/close functions are still protected from concurrent execution using the bdev->bd_mutex. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: linux-scsi@vger.kernel.org Cc: "James E.J. Bottomley" <James.Bottomley@suse.de> Acked-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2010-07-07 14:51:29 +00:00
atomic_t openers;
sd: Fix excessive capacity printing on devices with blocks bigger than 512 bytes During revalidate we check whether device capacity has changed before we decide whether to output disk information or not. The check for old capacity failed to take into account that we scaled sdkp->capacity based on the reported logical block size. And therefore the capacity test would always fail for devices with sectors bigger than 512 bytes and we would print several copies of the same discovery information. Avoid scaling sdkp->capacity and instead adjust the value on the fly when setting the block device capacity and generating fake C/H/S geometry. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Cc: <stable@vger.kernel.org> Reported-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Hannes Reinicke <hare@suse.de> Reviewed-by: Ewan Milne <emilne@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-03-29 01:18:56 +00:00
sector_t capacity; /* size in logical blocks */
sd: Limit transfer length Until now the per-command transfer length has exclusively been gated by the max_sectors parameter in the scsi_host template. Given that the size of this parameter has been bumped to an unsigned int we have to be careful not to exceed the target device's capabilities. If the if the device specifies a Maximum Transfer Length in the Block Limits VPD we'll use that value. Otherwise we'll use 0xffffffff for devices that have use_16_for_rw set and 0xffff for the rest. We then combine the chosen disk limit with max_sectors in the host template. The smaller of the two will be used to set the max_hw_sectors queue limit. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Ewan D. Milne <emilne@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-06-03 22:45:51 +00:00
u32 max_xfer_blocks;
block/sd: Fix device-imposed transfer length limits Commit 4f258a46346c ("sd: Fix maximum I/O size for BLOCK_PC requests") had the unfortunate side-effect of removing an implicit clamp to BLK_DEF_MAX_SECTORS for REQ_TYPE_FS requests in the block layer code. This caused problems for some SMR drives. Debugging this issue revealed a few problems with the existing infrastructure since the block layer didn't know how to deal with device-imposed limits, only limits set by the I/O controller. - Introduce a new queue limit, max_dev_sectors, which is used by the ULD to signal the maximum sectors for a REQ_TYPE_FS request. - Ensure that max_dev_sectors is correctly stacked and taken into account when overriding max_sectors through sysfs. - Rework sd_read_block_limits() so it saves the max_xfer and opt_xfer values for later processing. - In sd_revalidate() set the queue's max_dev_sectors based on the MAXIMUM TRANSFER LENGTH value in the Block Limits VPD. If this value is not reported, fall back to a cap based on the CDB TRANSFER LENGTH field size. - In sd_revalidate(), use OPTIMAL TRANSFER LENGTH from the Block Limits VPD--if reported and sane--to signal the preferred device transfer size for FS requests. Otherwise use BLK_DEF_MAX_SECTORS. - blk_limits_max_hw_sectors() is no longer used and can be removed. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=93581 Reviewed-by: Christoph Hellwig <hch@lst.de> Tested-by: sweeneygj@gmx.com Tested-by: Arzeets <anatol.pomozov@gmail.com> Tested-by: David Eisner <david.eisner@oriel.oxon.org> Tested-by: Mario Kicherer <dev@kicherer.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2015-11-13 21:46:48 +00:00
u32 opt_xfer_blocks;
[SCSI] sd: Logical Block Provisioning update SBC3r26 contains many changes to the Logical Block Provisioning interfaces (formerly known as Thin Provisioning ditto). This patch implements support for both the old and new schemes using the same heuristic as before (whether the LBP VPD page is present). The new code also allows the provisioning mode (i.e. choice of command) to be overridden on a per-device basis via sysfs. Two additional modes are supported in this version: - WRITE SAME(10) with the UNMAP bit set - WRITE SAME(10) without the UNMAP bit set. This allows us to support devices that predate the TP/LBP enhancements in SBC3 and which work by way zero-detection Switching between modes has been consolidated in a helper function that also updates the block layer topology according to the limitations of the chosen command. I experimented with trying WRITE SAME(16) if UNMAP fails, WRITE SAME(10) if WRITE SAME(16) fails, etc. but found several devices that got cranky. So for now we'll disable discard if one of the commands fail. The user still has the option of selecting a different mode in sysfs. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-03-08 07:07:15 +00:00
u32 max_ws_blocks;
u32 max_unmap_blocks;
u32 unmap_granularity;
u32 unmap_alignment;
[SCSI] sd: make printing use a common prefix Make SCSI disk printing more consistent: - Define sd_printk(), sd_print_sense_hdr() and sd_print_result() - Move relevant header bits into sd.h - Remove all the legacy disk_name passing and use scsi_disk pointers where possible - Switch printk() lines to the new sd_ functions so that output is consistent Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-02-28 03:40:55 +00:00
u32 index;
[SCSI] sd: Fix overflow with big physical blocks The hw_sector_size variable could overflow if a device reported huge physical blocks. Switch to the more accurate physical_block_size terminology and make sure we use an unsigned int to match the range permitted by READ CAPACITY(16). Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2010-09-28 18:48:47 +00:00
unsigned int physical_block_size;
[SCSI] Handle disk devices which can not process medium access commands We have experienced several devices which fail in a fashion we do not currently handle gracefully in SCSI. After a failure these devices will respond to the SCSI primary command set (INQUIRY, TEST UNIT READY, etc.) but any command accessing the storage medium will time out. The following patch adds an callback that can be used by upper level drivers to inspect the results of an error handling command. This in turn has been used to implement additional checking in the SCSI disk driver. If a medium access command fails twice but TEST UNIT READY succeeds both times in the subsequent error handling we will offline the device. The maximum number of failed commands required to take a device offline can be tweaked in sysfs. Also add a new error flag to scsi_debug which allows this scenario to be easily reproduced. [jejb: fix up integer parsing to use kstrtouint] Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-02-09 18:48:53 +00:00
unsigned int max_medium_access_timeouts;
unsigned int medium_access_timed_out;
[SCSI] sd: make printing use a common prefix Make SCSI disk printing more consistent: - Define sd_printk(), sd_print_sense_hdr() and sd_print_result() - Move relevant header bits into sd.h - Remove all the legacy disk_name passing and use scsi_disk pointers where possible - Switch printk() lines to the new sd_ functions so that output is consistent Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-02-28 03:40:55 +00:00
u8 media_present;
u8 write_prot;
[SCSI] sd: Identify DIF protection type and application tag ownership If a disk is formatted with protection information (Inquiry bit PROTECT=1) it is required to support Read Capacity(16). Force use of the 16-bit command in this case and extract the P_TYPE field which indicates whether the disk is formatted using DIF Type 1, 2 or 3. The ATO (App Tag Own) bit in the Control Mode Page indicates whether the storage device or the initiator own the contents of the DIF application tag. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-07-17 08:28:34 +00:00
u8 protection_type;/* Data Integrity Field */
[SCSI] sd: Logical Block Provisioning update SBC3r26 contains many changes to the Logical Block Provisioning interfaces (formerly known as Thin Provisioning ditto). This patch implements support for both the old and new schemes using the same heuristic as before (whether the LBP VPD page is present). The new code also allows the provisioning mode (i.e. choice of command) to be overridden on a per-device basis via sysfs. Two additional modes are supported in this version: - WRITE SAME(10) with the UNMAP bit set - WRITE SAME(10) without the UNMAP bit set. This allows us to support devices that predate the TP/LBP enhancements in SBC3 and which work by way zero-detection Switching between modes has been consolidated in a helper function that also updates the block layer topology according to the limitations of the chosen command. I experimented with trying WRITE SAME(16) if UNMAP fails, WRITE SAME(10) if WRITE SAME(16) fails, etc. but found several devices that got cranky. So for now we'll disable discard if one of the commands fail. The user still has the option of selecting a different mode in sysfs. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-03-08 07:07:15 +00:00
u8 provisioning_mode;
scsi: sd: Separate zeroout and discard command choices Now that zeroout and discards are distinct operations we need to separate the policy of choosing the appropriate command. Create a zeroing_mode which can be one of: write: Zeroout assist not present, use regular WRITE writesame: Allow WRITE SAME(10/16) with a zeroed payload writesame_16_unmap: Allow WRITE SAME(16) with UNMAP writesame_10_unmap: Allow WRITE SAME(10) with UNMAP The last two are conditional on the device being thin provisioned with LBPRZ=1 and LBPWS=1 or LBPWS10=1 respectively. Whether to set the UNMAP bit or not depends on the REQ_NOUNMAP flag. And if none of the _unmap variants are supported, regular WRITE SAME will be used if the device supports it. The zeroout_mode is exported in sysfs and the detected mode for a given device can be overridden using the string constants above. With this change in place we can now issue WRITE SAME(16) with UNMAP set for block zeroing applications that require hard guarantees and logical_block_size granularity. And at the same time use the UNMAP command with the device's preferred granulary and alignment for discard operations. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-05 17:21:24 +00:00
u8 zeroing_mode;
[SCSI] sd: Identify DIF protection type and application tag ownership If a disk is formatted with protection information (Inquiry bit PROTECT=1) it is required to support Read Capacity(16). Force use of the 16-bit command in this case and extract the P_TYPE field which indicates whether the disk is formatted using DIF Type 1, 2 or 3. The ATO (App Tag Own) bit in the Control Mode Page indicates whether the storage device or the initiator own the contents of the DIF application tag. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-07-17 08:28:34 +00:00
unsigned ATO : 1; /* state of disk ATO bit */
[SCSI] sd: fix array cache flushing bug causing performance problems Some arrays synchronize their full non volatile cache when the sd driver sends a SYNCHRONIZE CACHE command. Unfortunately, they can have Terrabytes of this and we send a SYNCHRONIZE CACHE for every barrier if an array reports it has a writeback cache. This leads to massive slowdowns on journalled filesystems. The fix is to allow userspace to turn off the writeback cache setting as a temporary measure (i.e. without doing the MODE SELECT to write it back to the device), so even though the device reported it has a writeback cache, the user, knowing that the cache is non volatile and all they care about is filesystem correctness, can turn that bit off in the kernel and avoid the performance ruinous (and safety irrelevant) SYNCHRONIZE CACHE commands. The way you do this is add a 'temporary' prefix when performing the usual cache setting operations, so echo temporary write through > /sys/class/scsi_disk/<disk>/cache_type Reported-by: Ric Wheeler <rwheeler@redhat.com> Cc: <stable@vger.kernel.org> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-04-24 21:02:53 +00:00
unsigned cache_override : 1; /* temp override of WCE,RCD */
[SCSI] sd: make printing use a common prefix Make SCSI disk printing more consistent: - Define sd_printk(), sd_print_sense_hdr() and sd_print_result() - Move relevant header bits into sd.h - Remove all the legacy disk_name passing and use scsi_disk pointers where possible - Switch printk() lines to the new sd_ functions so that output is consistent Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-02-28 03:40:55 +00:00
unsigned WCE : 1; /* state of disk WCE bit */
unsigned RCD : 1; /* state of disk RCD bit, unused */
unsigned DPOFUA : 1; /* state of disk DPOFUA bit */
[SCSI] sd: Make revalidate less chatty sd_revalidate ends up being called several times during device setup. With this patch we print everything during the first scan. Subsequent invocations will only print a message if the parameter in question has actually changed (LUN capacity has increased, etc.). Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-03-09 15:33:31 +00:00
unsigned first_scan : 1;
[SCSI] sd: Logical Block Provisioning update SBC3r26 contains many changes to the Logical Block Provisioning interfaces (formerly known as Thin Provisioning ditto). This patch implements support for both the old and new schemes using the same heuristic as before (whether the LBP VPD page is present). The new code also allows the provisioning mode (i.e. choice of command) to be overridden on a per-device basis via sysfs. Two additional modes are supported in this version: - WRITE SAME(10) with the UNMAP bit set - WRITE SAME(10) without the UNMAP bit set. This allows us to support devices that predate the TP/LBP enhancements in SBC3 and which work by way zero-detection Switching between modes has been consolidated in a helper function that also updates the block layer topology according to the limitations of the chosen command. I experimented with trying WRITE SAME(16) if UNMAP fails, WRITE SAME(10) if WRITE SAME(16) fails, etc. but found several devices that got cranky. So for now we'll disable discard if one of the commands fail. The user still has the option of selecting a different mode in sysfs. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-03-08 07:07:15 +00:00
unsigned lbpme : 1;
unsigned lbprz : 1;
unsigned lbpu : 1;
unsigned lbpws : 1;
unsigned lbpws10 : 1;
unsigned lbpvpd : 1;
[SCSI] sd: Update WRITE SAME heuristics SATA drives located behind a SAS controller would incorrectly receive WRITE SAME commands. Tweak the heuristics so that: - If REPORT SUPPORTED OPERATION CODES is provided we will use that to choose between WRITE SAME(16), WRITE SAME(10) and disabled. This also fixes an issue with the old code which would issue WRITE SAME(10) despite the command not being whitelisted in REPORT SUPPORTED OPERATION CODES. - If REPORT SUPPORTED OPERATION CODES is not provided we will fall back to WRITE SAME(10) unless the device has an ATA Information VPD page. The assumption is that a SATL which is smart enough to implement WRITE SAME would also provide REPORT SUPPORTED OPERATION CODES. To facilitate the new heuristics scsi_report_opcode() has been modified to so we can distinguish between "operation not supported" and "RSOC not supported". Reported-by: H. Peter Anvin <hpa@zytor.com> Tested-by: Bernd Schubert <bernd.schubert@itwm.fraunhofer.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Cc: <stable@vger.kernel.org> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-06-07 02:15:55 +00:00
unsigned ws10 : 1;
[SCSI] sd: Implement support for WRITE SAME Implement support for WRITE SAME(10) and WRITE SAME(16) in the SCSI disk driver. - We set the default maximum to 0xFFFF because there are several devices out there that only support two-byte block counts even with WRITE SAME(16). We only enable transfers bigger than 0xFFFF if the device explicitly reports MAXIMUM WRITE SAME LENGTH in the BLOCK LIMITS VPD. - max_write_same_blocks can be overriden per-device basis in sysfs. - The UNMAP discovery heuristics remain unchanged but the discard limits are tweaked to match the "real" WRITE SAME commands. - In the error handling logic we now distinguish between WRITE SAME with and without UNMAP set. The discovery process heuristics are: - If the device reports a SCSI level of SPC-3 or greater we'll issue READ SUPPORTED OPERATION CODES to find out whether WRITE SAME(16) is supported. If that's the case we will use it. - If the device supports the block limits VPD and reports a MAXIMUM WRITE SAME LENGTH bigger than 0xFFFF we will use WRITE SAME(16). - Otherwise we will use WRITE SAME(10) unless the target LBA is beyond 0xFFFFFFFF or the block count exceeds 0xFFFF. - no_write_same is set for ATA, FireWire and USB. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Mike Snitzer <snitzer@redhat.com> Reviewed-by: Jeff Garzik <jgarzik@redhat.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-09-18 16:19:32 +00:00
unsigned ws16 : 1;
sd: Implement support for ZBC devices Implement ZBC support functions to setup zoned disks, both host-managed and host-aware models. Only zoned disks that satisfy the following conditions are supported: 1) All zones are the same size, with the exception of an eventual last smaller runt zone. 2) For host-managed disks, reads are unrestricted (reads are not failed due to zone or write pointer alignement constraints). Zoned disks that do not satisfy these 2 conditions are setup with a capacity of 0 to prevent their use. The function sd_zbc_read_zones, called from sd_revalidate_disk, checks that the device satisfies the above two constraints. This function may also change the disk capacity previously set by sd_read_capacity for devices reporting only the capacity of conventional zones at the beginning of the LBA range (i.e. devices reporting rc_basis set to 0). The capacity message output was moved out of sd_read_capacity into a new function sd_print_capacity to include this eventual capacity change by sd_zbc_read_zones. This new function also includes a call to sd_zbc_print_zones to display the number of zones and zone size of the device. Signed-off-by: Hannes Reinecke <hare@suse.de> [Damien: * Removed zone cache support * Removed mapping of discard to reset write pointer command * Modified sd_zbc_read_zones to include checks that the device satisfies the kernel constraints * Implemeted REPORT ZONES setup and post-processing based on code from Shaun Tancheff <shaun.tancheff@seagate.com> * Removed confusing use of 512B sector units in functions interface] Signed-off-by: Damien Le Moal <damien.lemoal@hgst.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Shaun Tancheff <shaun.tancheff@seagate.com> Tested-by: Shaun Tancheff <shaun.tancheff@seagate.com> Acked-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-10-18 06:40:34 +00:00
unsigned rc_basis: 2;
unsigned zoned: 2;
unsigned urswrz : 1;
sd: add support for TCG OPAL self encrypting disks Just wire up the generic TCG OPAL infrastructure to the SCSI disk driver and the Security In/Out commands. Note that I don't know of any actual SCSI disks that do support TCG OPAL, but this is required to support ATA disks through libata. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2017-06-19 12:26:46 +00:00
unsigned security : 1;
scsi: scsi_error: count medium access timeout only once per EH run The current medium access timeout counter will be increased for each command, so if there are enough failed commands we'll hit the medium access timeout for even a single device failure and the following kernel message is displayed: sd H:C:T:L: [sdXY] Medium access timeout failure. Offlining disk! Fix this by making the timeout per EH run, ie the counter will only be increased once per device and EH run. Fixes: 18a4d0a ("[SCSI] Handle disk devices which can not process medium access commands") Cc: Ewan Milne <emilne@redhat.com> Cc: Lawrence Obermann <loberman@redhat.com> Cc: Benjamin Block <bblock@linux.vnet.ibm.com> Cc: Steffen Maier <maier@linux.vnet.ibm.com> Signed-off-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-04-06 13:36:29 +00:00
unsigned ignore_medium_access_errors : 1;
[SCSI] sd: make printing use a common prefix Make SCSI disk printing more consistent: - Define sd_printk(), sd_print_sense_hdr() and sd_print_result() - Move relevant header bits into sd.h - Remove all the legacy disk_name passing and use scsi_disk pointers where possible - Switch printk() lines to the new sd_ functions so that output is consistent Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-02-28 03:40:55 +00:00
};
SCSI: convert struct class_device to struct device It's big, but there doesn't seem to be a way to split it up smaller... Signed-off-by: Tony Jones <tonyj@suse.de> Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Cc: Roland Dreier <rolandd@cisco.com> Cc: Sean Hefty <sean.hefty@intel.com> Cc: Hal Rosenstock <hal.rosenstock@gmail.com> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-21 23:13:36 +00:00
#define to_scsi_disk(obj) container_of(obj,struct scsi_disk,dev)
[SCSI] sd: make printing use a common prefix Make SCSI disk printing more consistent: - Define sd_printk(), sd_print_sense_hdr() and sd_print_result() - Move relevant header bits into sd.h - Remove all the legacy disk_name passing and use scsi_disk pointers where possible - Switch printk() lines to the new sd_ functions so that output is consistent Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-02-28 03:40:55 +00:00
[SCSI] sd: Move scsi_disk() accessor function to sd.h Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-06-25 15:22:41 +00:00
static inline struct scsi_disk *scsi_disk(struct gendisk *disk)
{
return container_of(disk->private_data, struct scsi_disk, driver);
}
[SCSI] sd: make printing use a common prefix Make SCSI disk printing more consistent: - Define sd_printk(), sd_print_sense_hdr() and sd_print_result() - Move relevant header bits into sd.h - Remove all the legacy disk_name passing and use scsi_disk pointers where possible - Switch printk() lines to the new sd_ functions so that output is consistent Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-02-28 03:40:55 +00:00
#define sd_printk(prefix, sdsk, fmt, a...) \
(sdsk)->disk ? \
scsi: introduce sdev_prefix_printk() Like scmd_printk(), but the device name is passed in as a string. Can be used by eg ULDs which do not have access to the scsi_cmnd structure. Signed-off-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Robert Elliott <elliott@hp.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-10-24 12:26:44 +00:00
sdev_prefix_printk(prefix, (sdsk)->device, \
(sdsk)->disk->disk_name, fmt, ##a) : \
sdev_printk(prefix, (sdsk)->device, fmt, ##a)
[SCSI] sd: make printing use a common prefix Make SCSI disk printing more consistent: - Define sd_printk(), sd_print_sense_hdr() and sd_print_result() - Move relevant header bits into sd.h - Remove all the legacy disk_name passing and use scsi_disk pointers where possible - Switch printk() lines to the new sd_ functions so that output is consistent Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-02-28 03:40:55 +00:00
[SCSI] sd: Quiesce mode sense error messages Messages about discovered disk properties are only printed once unless they are found to have changed. Errors encountered during mode sense, however, are printed every time we revalidate. Quiesce mode sense errors so they are only printed during the first scan. [jejb: checkpatch fixes] Bugzilla: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=733565 Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2014-01-03 23:19:26 +00:00
#define sd_first_printk(prefix, sdsk, fmt, a...) \
do { \
if ((sdkp)->first_scan) \
sd_printk(prefix, sdsk, fmt, ##a); \
} while (0)
[SCSI] Handle disk devices which can not process medium access commands We have experienced several devices which fail in a fashion we do not currently handle gracefully in SCSI. After a failure these devices will respond to the SCSI primary command set (INQUIRY, TEST UNIT READY, etc.) but any command accessing the storage medium will time out. The following patch adds an callback that can be used by upper level drivers to inspect the results of an error handling command. This in turn has been used to implement additional checking in the SCSI disk driver. If a medium access command fails twice but TEST UNIT READY succeeds both times in the subsequent error handling we will offline the device. The maximum number of failed commands required to take a device offline can be tweaked in sysfs. Also add a new error flag to scsi_debug which allows this scenario to be easily reproduced. [jejb: fix up integer parsing to use kstrtouint] Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-02-09 18:48:53 +00:00
static inline int scsi_medium_access_command(struct scsi_cmnd *scmd)
{
switch (scmd->cmnd[0]) {
case READ_6:
case READ_10:
case READ_12:
case READ_16:
case SYNCHRONIZE_CACHE:
case VERIFY:
case VERIFY_12:
case VERIFY_16:
case WRITE_6:
case WRITE_10:
case WRITE_12:
case WRITE_16:
case WRITE_SAME:
case WRITE_SAME_16:
case UNMAP:
return 1;
case VARIABLE_LENGTH_CMD:
switch (scmd->cmnd[9]) {
case READ_32:
case VERIFY_32:
case WRITE_32:
case WRITE_SAME_32:
return 1;
}
}
return 0;
}
sd: Fix excessive capacity printing on devices with blocks bigger than 512 bytes During revalidate we check whether device capacity has changed before we decide whether to output disk information or not. The check for old capacity failed to take into account that we scaled sdkp->capacity based on the reported logical block size. And therefore the capacity test would always fail for devices with sectors bigger than 512 bytes and we would print several copies of the same discovery information. Avoid scaling sdkp->capacity and instead adjust the value on the fly when setting the block device capacity and generating fake C/H/S geometry. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Cc: <stable@vger.kernel.org> Reported-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Hannes Reinicke <hare@suse.de> Reviewed-by: Ewan Milne <emilne@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-03-29 01:18:56 +00:00
static inline sector_t logical_to_sectors(struct scsi_device *sdev, sector_t blocks)
{
return blocks << (ilog2(sdev->sector_size) - 9);
}
sd: Fix rw_max for devices that report an optimal xfer size For historic reasons, io_opt is in bytes and max_sectors in block layer sectors. This interface inconsistency is error prone and should be fixed. But for 4.4--4.7 let's make the unit difference explicit via a wrapper function. Fixes: d0eb20a863ba ("sd: Optimal I/O size is in bytes, not sectors") Cc: stable@vger.kernel.org # 4.4+ Reported-by: Fam Zheng <famz@redhat.com> Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Tested-by: Andrew Patterson <andrew.patterson@hpe.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-05-13 02:17:34 +00:00
static inline unsigned int logical_to_bytes(struct scsi_device *sdev, sector_t blocks)
{
return blocks * sdev->sector_size;
}
scsi: sd: Improve sd_completed_bytes Re-shuffle the code to be more efficient by not initializing variables upfront (i.e. do it only when necessary). Also replace the do_div calls with calls to sectors_to_logical(). No functional change is introduced by this patch. [mkp: bytes_to_logical()] Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-04-24 07:51:10 +00:00
static inline sector_t bytes_to_logical(struct scsi_device *sdev, unsigned int bytes)
{
return bytes >> ilog2(sdev->sector_size);
}
sd: Implement support for ZBC devices Implement ZBC support functions to setup zoned disks, both host-managed and host-aware models. Only zoned disks that satisfy the following conditions are supported: 1) All zones are the same size, with the exception of an eventual last smaller runt zone. 2) For host-managed disks, reads are unrestricted (reads are not failed due to zone or write pointer alignement constraints). Zoned disks that do not satisfy these 2 conditions are setup with a capacity of 0 to prevent their use. The function sd_zbc_read_zones, called from sd_revalidate_disk, checks that the device satisfies the above two constraints. This function may also change the disk capacity previously set by sd_read_capacity for devices reporting only the capacity of conventional zones at the beginning of the LBA range (i.e. devices reporting rc_basis set to 0). The capacity message output was moved out of sd_read_capacity into a new function sd_print_capacity to include this eventual capacity change by sd_zbc_read_zones. This new function also includes a call to sd_zbc_print_zones to display the number of zones and zone size of the device. Signed-off-by: Hannes Reinecke <hare@suse.de> [Damien: * Removed zone cache support * Removed mapping of discard to reset write pointer command * Modified sd_zbc_read_zones to include checks that the device satisfies the kernel constraints * Implemeted REPORT ZONES setup and post-processing based on code from Shaun Tancheff <shaun.tancheff@seagate.com> * Removed confusing use of 512B sector units in functions interface] Signed-off-by: Damien Le Moal <damien.lemoal@hgst.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Shaun Tancheff <shaun.tancheff@seagate.com> Tested-by: Shaun Tancheff <shaun.tancheff@seagate.com> Acked-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-10-18 06:40:34 +00:00
static inline sector_t sectors_to_logical(struct scsi_device *sdev, sector_t sector)
{
return sector >> (ilog2(sdev->sector_size) - 9);
}
sd: Honor block layer integrity handling flags A set of flags introduced in the block layer enable better control over how protection information is handled. These flags are useful for both error injection and data recovery purposes. Checking can be enabled and disabled for controller and disk, and the guard tag format is now a per-I/O property. Update sd_protect_op to communicate the relevant information to the low-level device driver via a set of flags in scsi_cmnd. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Sagi Grimberg <sagig@mellanox.com> Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2014-09-26 23:20:08 +00:00
/*
* Look up the DIX operation based on whether the command is read or
* write and whether dix and dif are enabled.
*/
static inline unsigned int sd_prot_op(bool write, bool dix, bool dif)
{
/* Lookup table: bit 2 (write), bit 1 (dix), bit 0 (dif) */
const unsigned int ops[] = { /* wrt dix dif */
SCSI_PROT_NORMAL, /* 0 0 0 */
SCSI_PROT_READ_STRIP, /* 0 0 1 */
SCSI_PROT_READ_INSERT, /* 0 1 0 */
SCSI_PROT_READ_PASS, /* 0 1 1 */
SCSI_PROT_NORMAL, /* 1 0 0 */
SCSI_PROT_WRITE_INSERT, /* 1 0 1 */
SCSI_PROT_WRITE_STRIP, /* 1 1 0 */
SCSI_PROT_WRITE_PASS, /* 1 1 1 */
};
return ops[write << 2 | dix << 1 | dif];
}
/*
* Returns a mask of the protection flags that are valid for a given DIX
* operation.
*/
static inline unsigned int sd_prot_flag_mask(unsigned int prot_op)
{
const unsigned int flag_mask[] = {
[SCSI_PROT_NORMAL] = 0,
[SCSI_PROT_READ_STRIP] = SCSI_PROT_TRANSFER_PI |
SCSI_PROT_GUARD_CHECK |
SCSI_PROT_REF_CHECK |
SCSI_PROT_REF_INCREMENT,
[SCSI_PROT_READ_INSERT] = SCSI_PROT_REF_INCREMENT |
SCSI_PROT_IP_CHECKSUM,
[SCSI_PROT_READ_PASS] = SCSI_PROT_TRANSFER_PI |
SCSI_PROT_GUARD_CHECK |
SCSI_PROT_REF_CHECK |
SCSI_PROT_REF_INCREMENT |
SCSI_PROT_IP_CHECKSUM,
[SCSI_PROT_WRITE_INSERT] = SCSI_PROT_TRANSFER_PI |
SCSI_PROT_REF_INCREMENT,
[SCSI_PROT_WRITE_STRIP] = SCSI_PROT_GUARD_CHECK |
SCSI_PROT_REF_CHECK |
SCSI_PROT_REF_INCREMENT |
SCSI_PROT_IP_CHECKSUM,
[SCSI_PROT_WRITE_PASS] = SCSI_PROT_TRANSFER_PI |
SCSI_PROT_GUARD_CHECK |
SCSI_PROT_REF_CHECK |
SCSI_PROT_REF_INCREMENT |
SCSI_PROT_IP_CHECKSUM,
};
return flag_mask[prot_op];
}
[SCSI] sd: fix compile failure with CONFIG_BLK_DEV_INTEGRITY=n Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-10-13 19:20:06 +00:00
#ifdef CONFIG_BLK_DEV_INTEGRITY
[SCSI] sd: Support for SCSI disk (SBC) Data Integrity Field Support for controllers and disks that implement DIF protection information: - During command preparation the RDPROTECT/WRPROTECT must be set correctly if the target has DIF enabled. - READ(6) and WRITE(6) are not supported when DIF is on. - The controller must be told how to handle the I/O via the protection operation field in scsi_cmnd. - Refactor the I/O completion code that extracts failed LBA from the returned sense data and handle DIF failures correctly. - sd_dif.c implements the functions required to prepare and complete requests with protection information attached. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-07-17 08:28:35 +00:00
extern void sd_dif_config_host(struct scsi_disk *);
sd: Honor block layer integrity handling flags A set of flags introduced in the block layer enable better control over how protection information is handled. These flags are useful for both error injection and data recovery purposes. Checking can be enabled and disabled for controller and disk, and the guard tag format is now a per-I/O property. Update sd_protect_op to communicate the relevant information to the low-level device driver via a set of flags in scsi_cmnd. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Sagi Grimberg <sagig@mellanox.com> Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2014-09-26 23:20:08 +00:00
extern void sd_dif_prepare(struct scsi_cmnd *scmd);
[SCSI] sd: Support for SCSI disk (SBC) Data Integrity Field Support for controllers and disks that implement DIF protection information: - During command preparation the RDPROTECT/WRPROTECT must be set correctly if the target has DIF enabled. - READ(6) and WRITE(6) are not supported when DIF is on. - The controller must be told how to handle the I/O via the protection operation field in scsi_cmnd. - Refactor the I/O completion code that extracts failed LBA from the returned sense data and handle DIF failures correctly. - sd_dif.c implements the functions required to prepare and complete requests with protection information attached. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-07-17 08:28:35 +00:00
extern void sd_dif_complete(struct scsi_cmnd *, unsigned int);
#else /* CONFIG_BLK_DEV_INTEGRITY */
[SCSI] sd: fix compile failure with CONFIG_BLK_DEV_INTEGRITY=n Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-10-13 19:20:06 +00:00
static inline void sd_dif_config_host(struct scsi_disk *disk)
{
}
sd: Honor block layer integrity handling flags A set of flags introduced in the block layer enable better control over how protection information is handled. These flags are useful for both error injection and data recovery purposes. Checking can be enabled and disabled for controller and disk, and the guard tag format is now a per-I/O property. Update sd_protect_op to communicate the relevant information to the low-level device driver via a set of flags in scsi_cmnd. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Sagi Grimberg <sagig@mellanox.com> Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2014-09-26 23:20:08 +00:00
static inline int sd_dif_prepare(struct scsi_cmnd *scmd)
[SCSI] sd: fix compile failure with CONFIG_BLK_DEV_INTEGRITY=n Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-10-13 19:20:06 +00:00
{
return 0;
}
static inline void sd_dif_complete(struct scsi_cmnd *cmd, unsigned int a)
{
}
[SCSI] sd: Support for SCSI disk (SBC) Data Integrity Field Support for controllers and disks that implement DIF protection information: - During command preparation the RDPROTECT/WRPROTECT must be set correctly if the target has DIF enabled. - READ(6) and WRITE(6) are not supported when DIF is on. - The controller must be told how to handle the I/O via the protection operation field in scsi_cmnd. - Refactor the I/O completion code that extracts failed LBA from the returned sense data and handle DIF failures correctly. - sd_dif.c implements the functions required to prepare and complete requests with protection information attached. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-07-17 08:28:35 +00:00
#endif /* CONFIG_BLK_DEV_INTEGRITY */
sd: Implement support for ZBC devices Implement ZBC support functions to setup zoned disks, both host-managed and host-aware models. Only zoned disks that satisfy the following conditions are supported: 1) All zones are the same size, with the exception of an eventual last smaller runt zone. 2) For host-managed disks, reads are unrestricted (reads are not failed due to zone or write pointer alignement constraints). Zoned disks that do not satisfy these 2 conditions are setup with a capacity of 0 to prevent their use. The function sd_zbc_read_zones, called from sd_revalidate_disk, checks that the device satisfies the above two constraints. This function may also change the disk capacity previously set by sd_read_capacity for devices reporting only the capacity of conventional zones at the beginning of the LBA range (i.e. devices reporting rc_basis set to 0). The capacity message output was moved out of sd_read_capacity into a new function sd_print_capacity to include this eventual capacity change by sd_zbc_read_zones. This new function also includes a call to sd_zbc_print_zones to display the number of zones and zone size of the device. Signed-off-by: Hannes Reinecke <hare@suse.de> [Damien: * Removed zone cache support * Removed mapping of discard to reset write pointer command * Modified sd_zbc_read_zones to include checks that the device satisfies the kernel constraints * Implemeted REPORT ZONES setup and post-processing based on code from Shaun Tancheff <shaun.tancheff@seagate.com> * Removed confusing use of 512B sector units in functions interface] Signed-off-by: Damien Le Moal <damien.lemoal@hgst.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Shaun Tancheff <shaun.tancheff@seagate.com> Tested-by: Shaun Tancheff <shaun.tancheff@seagate.com> Acked-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-10-18 06:40:34 +00:00
static inline int sd_is_zoned(struct scsi_disk *sdkp)
{
return sdkp->zoned == 1 || sdkp->device->type == TYPE_ZBC;
}
#ifdef CONFIG_BLK_DEV_ZONED
extern int sd_zbc_read_zones(struct scsi_disk *sdkp, unsigned char *buffer);
extern void sd_zbc_remove(struct scsi_disk *sdkp);
extern void sd_zbc_print_zones(struct scsi_disk *sdkp);
extern int sd_zbc_setup_report_cmnd(struct scsi_cmnd *cmd);
extern int sd_zbc_setup_reset_cmnd(struct scsi_cmnd *cmd);
extern void sd_zbc_complete(struct scsi_cmnd *cmd, unsigned int good_bytes,
struct scsi_sense_hdr *sshdr);
#else /* CONFIG_BLK_DEV_ZONED */
static inline int sd_zbc_read_zones(struct scsi_disk *sdkp,
unsigned char *buf)
{
return 0;
}
static inline void sd_zbc_remove(struct scsi_disk *sdkp) {}
static inline void sd_zbc_print_zones(struct scsi_disk *sdkp) {}
static inline int sd_zbc_setup_report_cmnd(struct scsi_cmnd *cmd)
{
return BLKPREP_INVALID;
}
static inline int sd_zbc_setup_reset_cmnd(struct scsi_cmnd *cmd)
{
return BLKPREP_INVALID;
}
static inline void sd_zbc_complete(struct scsi_cmnd *cmd,
unsigned int good_bytes,
struct scsi_sense_hdr *sshdr) {}
#endif /* CONFIG_BLK_DEV_ZONED */
[SCSI] sd: make printing use a common prefix Make SCSI disk printing more consistent: - Define sd_printk(), sd_print_sense_hdr() and sd_print_result() - Move relevant header bits into sd.h - Remove all the legacy disk_name passing and use scsi_disk pointers where possible - Switch printk() lines to the new sd_ functions so that output is consistent Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-02-28 03:40:55 +00:00
#endif /* _SCSI_DISK_H */
Reference in New Issue Copy Permalink