linux/drivers/infiniband/hw/bnxt_re/main.c

1648 lines
43 KiB
C
Raw Normal View History

/*
* Broadcom NetXtreme-E RoCE driver.
*
* Copyright (c) 2016 - 2017, Broadcom. All rights reserved. The term
* Broadcom refers to Broadcom Limited and/or its subsidiaries.
*
* This software is available to you under a choice of one of two
* licenses. You may choose to be licensed under the terms of the GNU
* General Public License (GPL) Version 2, available from the file
* COPYING in the main directory of this source tree, or the
* BSD license below:
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS''
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
* THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
* BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
* WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
* OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
* IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* Description: Main component of the bnxt_re driver
*/
#include <linux/module.h>
#include <linux/netdevice.h>
#include <linux/ethtool.h>
#include <linux/mutex.h>
#include <linux/list.h>
#include <linux/rculist.h>
#include <linux/spinlock.h>
#include <linux/pci.h>
#include <net/dcbnl.h>
#include <net/ipv6.h>
#include <net/addrconf.h>
#include <linux/if_ether.h>
#include <rdma/ib_verbs.h>
#include <rdma/ib_user_verbs.h>
#include <rdma/ib_umem.h>
#include <rdma/ib_addr.h>
#include "bnxt_ulp.h"
#include "roce_hsi.h"
#include "qplib_res.h"
#include "qplib_sp.h"
#include "qplib_fp.h"
#include "qplib_rcfw.h"
#include "bnxt_re.h"
#include "ib_verbs.h"
#include <rdma/bnxt_re-abi.h>
#include "bnxt.h"
#include "hw_counters.h"
static char version[] =
BNXT_RE_DESC "\n";
MODULE_AUTHOR("Eddie Wai <eddie.wai@broadcom.com>");
MODULE_DESCRIPTION(BNXT_RE_DESC " Driver");
MODULE_LICENSE("Dual BSD/GPL");
/* globals */
static struct list_head bnxt_re_dev_list = LIST_HEAD_INIT(bnxt_re_dev_list);
/* Mutex to protect the list of bnxt_re devices added */
static DEFINE_MUTEX(bnxt_re_dev_lock);
static struct workqueue_struct *bnxt_re_wq;
RDMA/bnxt_re: Fix system crash during RDMA resource initialization bnxt_re_ib_reg acquires and releases the rtnl lock whenever it accesses the L2 driver. The following sequence can trigger a crash Acquires the rtnl_lock -> Registers roce driver callback with L2 driver -> release the rtnl lock bnxt_re acquires the rtnl_lock -> Request for MSIx vectors -> release the rtnl_lock Issue happens when bnxt_re proceeds with remaining part of initialization and L2 driver invokes bnxt_ulp_irq_stop as a part of bnxt_open_nic. The crash is in bnxt_qplib_nq_stop_irq as the NQ structures are not initialized yet, <snip> [ 3551.726647] BUG: unable to handle kernel NULL pointer dereference at (null) [ 3551.726656] IP: [<ffffffffc0840ee9>] bnxt_qplib_nq_stop_irq+0x59/0xb0 [bnxt_re] [ 3551.726674] PGD 0 [ 3551.726679] Oops: 0002 1 SMP ... [ 3551.726822] Hardware name: Dell Inc. PowerEdge R720/08RW36, BIOS 2.4.3 07/09/2014 [ 3551.726826] task: ffff97e30eec5ee0 ti: ffff97e3173bc000 task.ti: ffff97e3173bc000 [ 3551.726829] RIP: 0010:[<ffffffffc0840ee9>] [<ffffffffc0840ee9>] bnxt_qplib_nq_stop_irq+0x59/0xb0 [bnxt_re] ... [ 3551.726872] Call Trace: [ 3551.726886] [<ffffffffc082cb9e>] bnxt_re_stop_irq+0x4e/0x70 [bnxt_re] [ 3551.726899] [<ffffffffc07d6a53>] bnxt_ulp_irq_stop+0x43/0x70 [bnxt_en] [ 3551.726908] [<ffffffffc07c82f4>] bnxt_reserve_rings+0x174/0x1e0 [bnxt_en] [ 3551.726917] [<ffffffffc07cafd8>] __bnxt_open_nic+0x368/0x9a0 [bnxt_en] [ 3551.726925] [<ffffffffc07cb62b>] bnxt_open_nic+0x1b/0x50 [bnxt_en] [ 3551.726934] [<ffffffffc07cc62f>] bnxt_setup_mq_tc+0x11f/0x260 [bnxt_en] [ 3551.726943] [<ffffffffc07d5f58>] bnxt_dcbnl_ieee_setets+0xb8/0x1f0 [bnxt_en] [ 3551.726954] [<ffffffff890f983a>] dcbnl_ieee_set+0x9a/0x250 [ 3551.726966] [<ffffffff88fd6d21>] ? __alloc_skb+0xa1/0x2d0 [ 3551.726972] [<ffffffff890f72fa>] dcb_doit+0x13a/0x210 [ 3551.726981] [<ffffffff89003ff7>] rtnetlink_rcv_msg+0xa7/0x260 [ 3551.726989] [<ffffffff88ffdb00>] ? rtnl_unicast+0x20/0x30 [ 3551.726996] [<ffffffff88bf9dc8>] ? __kmalloc_node_track_caller+0x58/0x290 [ 3551.727002] [<ffffffff890f7326>] ? dcb_doit+0x166/0x210 [ 3551.727007] [<ffffffff88fd6d0d>] ? __alloc_skb+0x8d/0x2d0 [ 3551.727012] [<ffffffff89003f50>] ? rtnl_newlink+0x880/0x880 ... [ 3551.727104] [<ffffffff8911f7d5>] system_call_fastpath+0x1c/0x21 ... [ 3551.727164] RIP [<ffffffffc0840ee9>] bnxt_qplib_nq_stop_irq+0x59/0xb0 [bnxt_re] [ 3551.727175] RSP <ffff97e3173bf788> [ 3551.727177] CR2: 0000000000000000 Avoid this inconsistent state and system crash by acquiring the rtnl lock for the entire duration of device initialization. Re-factor the code to remove the rtnl lock from the individual function and acquire and release it from the caller. Fixes: 1ac5a4047975 ("RDMA/bnxt_re: Add bnxt_re RoCE driver") Fixes: 6e04b1035689 ("RDMA/bnxt_re: Fix broken RoCE driver due to recent L2 driver changes") Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-09-21 05:33:00 +00:00
static void bnxt_re_ib_unreg(struct bnxt_re_dev *rdev);
/* SR-IOV helper functions */
static void bnxt_re_get_sriov_func_type(struct bnxt_re_dev *rdev)
{
struct bnxt *bp;
bp = netdev_priv(rdev->en_dev->net);
if (BNXT_VF(bp))
rdev->is_virtfn = 1;
}
/* Set the maximum number of each resource that the driver actually wants
* to allocate. This may be up to the maximum number the firmware has
* reserved for the function. The driver may choose to allocate fewer
* resources than the firmware maximum.
*/
static void bnxt_re_set_resource_limits(struct bnxt_re_dev *rdev)
{
u32 vf_qps = 0, vf_srqs = 0, vf_cqs = 0, vf_mrws = 0, vf_gids = 0;
u32 i;
u32 vf_pct;
u32 num_vfs;
struct bnxt_qplib_dev_attr *dev_attr = &rdev->dev_attr;
rdev->qplib_ctx.qpc_count = min_t(u32, BNXT_RE_MAX_QPC_COUNT,
dev_attr->max_qp);
rdev->qplib_ctx.mrw_count = BNXT_RE_MAX_MRW_COUNT_256K;
/* Use max_mr from fw since max_mrw does not get set */
rdev->qplib_ctx.mrw_count = min_t(u32, rdev->qplib_ctx.mrw_count,
dev_attr->max_mr);
rdev->qplib_ctx.srqc_count = min_t(u32, BNXT_RE_MAX_SRQC_COUNT,
dev_attr->max_srq);
rdev->qplib_ctx.cq_count = min_t(u32, BNXT_RE_MAX_CQ_COUNT,
dev_attr->max_cq);
for (i = 0; i < MAX_TQM_ALLOC_REQ; i++)
rdev->qplib_ctx.tqm_count[i] =
rdev->dev_attr.tqm_alloc_reqs[i];
if (rdev->num_vfs) {
/*
* Reserve a set of resources for the PF. Divide the remaining
* resources among the VFs
*/
vf_pct = 100 - BNXT_RE_PCT_RSVD_FOR_PF;
num_vfs = 100 * rdev->num_vfs;
vf_qps = (rdev->qplib_ctx.qpc_count * vf_pct) / num_vfs;
vf_srqs = (rdev->qplib_ctx.srqc_count * vf_pct) / num_vfs;
vf_cqs = (rdev->qplib_ctx.cq_count * vf_pct) / num_vfs;
/*
* The driver allows many more MRs than other resources. If the
* firmware does also, then reserve a fixed amount for the PF
* and divide the rest among VFs. VFs may use many MRs for NFS
* mounts, ISER, NVME applications, etc. If the firmware
* severely restricts the number of MRs, then let PF have
* half and divide the rest among VFs, as for the other
* resource types.
*/
if (rdev->qplib_ctx.mrw_count < BNXT_RE_MAX_MRW_COUNT_64K)
vf_mrws = rdev->qplib_ctx.mrw_count * vf_pct / num_vfs;
else
vf_mrws = (rdev->qplib_ctx.mrw_count -
BNXT_RE_RESVD_MR_FOR_PF) / rdev->num_vfs;
vf_gids = BNXT_RE_MAX_GID_PER_VF;
}
rdev->qplib_ctx.vf_res.max_mrw_per_vf = vf_mrws;
rdev->qplib_ctx.vf_res.max_gid_per_vf = vf_gids;
rdev->qplib_ctx.vf_res.max_qp_per_vf = vf_qps;
rdev->qplib_ctx.vf_res.max_srq_per_vf = vf_srqs;
rdev->qplib_ctx.vf_res.max_cq_per_vf = vf_cqs;
}
/* for handling bnxt_en callbacks later */
static void bnxt_re_stop(void *p)
{
}
static void bnxt_re_start(void *p)
{
}
static void bnxt_re_sriov_config(void *p, int num_vfs)
{
struct bnxt_re_dev *rdev = p;
if (!rdev)
return;
rdev->num_vfs = num_vfs;
bnxt_re_set_resource_limits(rdev);
bnxt_qplib_set_func_resources(&rdev->qplib_res, &rdev->rcfw,
&rdev->qplib_ctx);
}
static void bnxt_re_shutdown(void *p)
{
struct bnxt_re_dev *rdev = p;
if (!rdev)
return;
RDMA/bnxt_re: Fix system crash during RDMA resource initialization bnxt_re_ib_reg acquires and releases the rtnl lock whenever it accesses the L2 driver. The following sequence can trigger a crash Acquires the rtnl_lock -> Registers roce driver callback with L2 driver -> release the rtnl lock bnxt_re acquires the rtnl_lock -> Request for MSIx vectors -> release the rtnl_lock Issue happens when bnxt_re proceeds with remaining part of initialization and L2 driver invokes bnxt_ulp_irq_stop as a part of bnxt_open_nic. The crash is in bnxt_qplib_nq_stop_irq as the NQ structures are not initialized yet, <snip> [ 3551.726647] BUG: unable to handle kernel NULL pointer dereference at (null) [ 3551.726656] IP: [<ffffffffc0840ee9>] bnxt_qplib_nq_stop_irq+0x59/0xb0 [bnxt_re] [ 3551.726674] PGD 0 [ 3551.726679] Oops: 0002 1 SMP ... [ 3551.726822] Hardware name: Dell Inc. PowerEdge R720/08RW36, BIOS 2.4.3 07/09/2014 [ 3551.726826] task: ffff97e30eec5ee0 ti: ffff97e3173bc000 task.ti: ffff97e3173bc000 [ 3551.726829] RIP: 0010:[<ffffffffc0840ee9>] [<ffffffffc0840ee9>] bnxt_qplib_nq_stop_irq+0x59/0xb0 [bnxt_re] ... [ 3551.726872] Call Trace: [ 3551.726886] [<ffffffffc082cb9e>] bnxt_re_stop_irq+0x4e/0x70 [bnxt_re] [ 3551.726899] [<ffffffffc07d6a53>] bnxt_ulp_irq_stop+0x43/0x70 [bnxt_en] [ 3551.726908] [<ffffffffc07c82f4>] bnxt_reserve_rings+0x174/0x1e0 [bnxt_en] [ 3551.726917] [<ffffffffc07cafd8>] __bnxt_open_nic+0x368/0x9a0 [bnxt_en] [ 3551.726925] [<ffffffffc07cb62b>] bnxt_open_nic+0x1b/0x50 [bnxt_en] [ 3551.726934] [<ffffffffc07cc62f>] bnxt_setup_mq_tc+0x11f/0x260 [bnxt_en] [ 3551.726943] [<ffffffffc07d5f58>] bnxt_dcbnl_ieee_setets+0xb8/0x1f0 [bnxt_en] [ 3551.726954] [<ffffffff890f983a>] dcbnl_ieee_set+0x9a/0x250 [ 3551.726966] [<ffffffff88fd6d21>] ? __alloc_skb+0xa1/0x2d0 [ 3551.726972] [<ffffffff890f72fa>] dcb_doit+0x13a/0x210 [ 3551.726981] [<ffffffff89003ff7>] rtnetlink_rcv_msg+0xa7/0x260 [ 3551.726989] [<ffffffff88ffdb00>] ? rtnl_unicast+0x20/0x30 [ 3551.726996] [<ffffffff88bf9dc8>] ? __kmalloc_node_track_caller+0x58/0x290 [ 3551.727002] [<ffffffff890f7326>] ? dcb_doit+0x166/0x210 [ 3551.727007] [<ffffffff88fd6d0d>] ? __alloc_skb+0x8d/0x2d0 [ 3551.727012] [<ffffffff89003f50>] ? rtnl_newlink+0x880/0x880 ... [ 3551.727104] [<ffffffff8911f7d5>] system_call_fastpath+0x1c/0x21 ... [ 3551.727164] RIP [<ffffffffc0840ee9>] bnxt_qplib_nq_stop_irq+0x59/0xb0 [bnxt_re] [ 3551.727175] RSP <ffff97e3173bf788> [ 3551.727177] CR2: 0000000000000000 Avoid this inconsistent state and system crash by acquiring the rtnl lock for the entire duration of device initialization. Re-factor the code to remove the rtnl lock from the individual function and acquire and release it from the caller. Fixes: 1ac5a4047975 ("RDMA/bnxt_re: Add bnxt_re RoCE driver") Fixes: 6e04b1035689 ("RDMA/bnxt_re: Fix broken RoCE driver due to recent L2 driver changes") Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-09-21 05:33:00 +00:00
bnxt_re_ib_unreg(rdev);
}
static void bnxt_re_stop_irq(void *handle)
{
struct bnxt_re_dev *rdev = (struct bnxt_re_dev *)handle;
struct bnxt_qplib_rcfw *rcfw = &rdev->rcfw;
struct bnxt_qplib_nq *nq;
int indx;
for (indx = BNXT_RE_NQ_IDX; indx < rdev->num_msix; indx++) {
nq = &rdev->nq[indx - 1];
bnxt_qplib_nq_stop_irq(nq, false);
}
bnxt_qplib_rcfw_stop_irq(rcfw, false);
}
static void bnxt_re_start_irq(void *handle, struct bnxt_msix_entry *ent)
{
struct bnxt_re_dev *rdev = (struct bnxt_re_dev *)handle;
struct bnxt_msix_entry *msix_ent = rdev->msix_entries;
struct bnxt_qplib_rcfw *rcfw = &rdev->rcfw;
struct bnxt_qplib_nq *nq;
int indx, rc;
if (!ent) {
/* Not setting the f/w timeout bit in rcfw.
* During the driver unload the first command
* to f/w will timeout and that will set the
* timeout bit.
*/
dev_err(rdev_to_dev(rdev), "Failed to re-start IRQs\n");
return;
}
/* Vectors may change after restart, so update with new vectors
* in device sctructure.
*/
for (indx = 0; indx < rdev->num_msix; indx++)
rdev->msix_entries[indx].vector = ent[indx].vector;
bnxt_qplib_rcfw_start_irq(rcfw, msix_ent[BNXT_RE_AEQ_IDX].vector,
false);
for (indx = BNXT_RE_NQ_IDX ; indx < rdev->num_msix; indx++) {
nq = &rdev->nq[indx - 1];
rc = bnxt_qplib_nq_start_irq(nq, indx - 1,
msix_ent[indx].vector, false);
if (rc)
dev_warn(rdev_to_dev(rdev),
"Failed to reinit NQ index %d\n", indx - 1);
}
}
static struct bnxt_ulp_ops bnxt_re_ulp_ops = {
.ulp_async_notifier = NULL,
.ulp_stop = bnxt_re_stop,
.ulp_start = bnxt_re_start,
.ulp_sriov_config = bnxt_re_sriov_config,
.ulp_shutdown = bnxt_re_shutdown,
.ulp_irq_stop = bnxt_re_stop_irq,
.ulp_irq_restart = bnxt_re_start_irq
};
/* RoCE -> Net driver */
/* Driver registration routines used to let the networking driver (bnxt_en)
* to know that the RoCE driver is now installed
*/
RDMA/bnxt_re: Fix system crash during RDMA resource initialization bnxt_re_ib_reg acquires and releases the rtnl lock whenever it accesses the L2 driver. The following sequence can trigger a crash Acquires the rtnl_lock -> Registers roce driver callback with L2 driver -> release the rtnl lock bnxt_re acquires the rtnl_lock -> Request for MSIx vectors -> release the rtnl_lock Issue happens when bnxt_re proceeds with remaining part of initialization and L2 driver invokes bnxt_ulp_irq_stop as a part of bnxt_open_nic. The crash is in bnxt_qplib_nq_stop_irq as the NQ structures are not initialized yet, <snip> [ 3551.726647] BUG: unable to handle kernel NULL pointer dereference at (null) [ 3551.726656] IP: [<ffffffffc0840ee9>] bnxt_qplib_nq_stop_irq+0x59/0xb0 [bnxt_re] [ 3551.726674] PGD 0 [ 3551.726679] Oops: 0002 1 SMP ... [ 3551.726822] Hardware name: Dell Inc. PowerEdge R720/08RW36, BIOS 2.4.3 07/09/2014 [ 3551.726826] task: ffff97e30eec5ee0 ti: ffff97e3173bc000 task.ti: ffff97e3173bc000 [ 3551.726829] RIP: 0010:[<ffffffffc0840ee9>] [<ffffffffc0840ee9>] bnxt_qplib_nq_stop_irq+0x59/0xb0 [bnxt_re] ... [ 3551.726872] Call Trace: [ 3551.726886] [<ffffffffc082cb9e>] bnxt_re_stop_irq+0x4e/0x70 [bnxt_re] [ 3551.726899] [<ffffffffc07d6a53>] bnxt_ulp_irq_stop+0x43/0x70 [bnxt_en] [ 3551.726908] [<ffffffffc07c82f4>] bnxt_reserve_rings+0x174/0x1e0 [bnxt_en] [ 3551.726917] [<ffffffffc07cafd8>] __bnxt_open_nic+0x368/0x9a0 [bnxt_en] [ 3551.726925] [<ffffffffc07cb62b>] bnxt_open_nic+0x1b/0x50 [bnxt_en] [ 3551.726934] [<ffffffffc07cc62f>] bnxt_setup_mq_tc+0x11f/0x260 [bnxt_en] [ 3551.726943] [<ffffffffc07d5f58>] bnxt_dcbnl_ieee_setets+0xb8/0x1f0 [bnxt_en] [ 3551.726954] [<ffffffff890f983a>] dcbnl_ieee_set+0x9a/0x250 [ 3551.726966] [<ffffffff88fd6d21>] ? __alloc_skb+0xa1/0x2d0 [ 3551.726972] [<ffffffff890f72fa>] dcb_doit+0x13a/0x210 [ 3551.726981] [<ffffffff89003ff7>] rtnetlink_rcv_msg+0xa7/0x260 [ 3551.726989] [<ffffffff88ffdb00>] ? rtnl_unicast+0x20/0x30 [ 3551.726996] [<ffffffff88bf9dc8>] ? __kmalloc_node_track_caller+0x58/0x290 [ 3551.727002] [<ffffffff890f7326>] ? dcb_doit+0x166/0x210 [ 3551.727007] [<ffffffff88fd6d0d>] ? __alloc_skb+0x8d/0x2d0 [ 3551.727012] [<ffffffff89003f50>] ? rtnl_newlink+0x880/0x880 ... [ 3551.727104] [<ffffffff8911f7d5>] system_call_fastpath+0x1c/0x21 ... [ 3551.727164] RIP [<ffffffffc0840ee9>] bnxt_qplib_nq_stop_irq+0x59/0xb0 [bnxt_re] [ 3551.727175] RSP <ffff97e3173bf788> [ 3551.727177] CR2: 0000000000000000 Avoid this inconsistent state and system crash by acquiring the rtnl lock for the entire duration of device initialization. Re-factor the code to remove the rtnl lock from the individual function and acquire and release it from the caller. Fixes: 1ac5a4047975 ("RDMA/bnxt_re: Add bnxt_re RoCE driver") Fixes: 6e04b1035689 ("RDMA/bnxt_re: Fix broken RoCE driver due to recent L2 driver changes") Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-09-21 05:33:00 +00:00
static int bnxt_re_unregister_netdev(struct bnxt_re_dev *rdev)
{
struct bnxt_en_dev *en_dev;
int rc;
if (!rdev)
return -EINVAL;
en_dev = rdev->en_dev;
rc = en_dev->en_ops->bnxt_unregister_device(rdev->en_dev,
BNXT_ROCE_ULP);
return rc;
}
static int bnxt_re_register_netdev(struct bnxt_re_dev *rdev)
{
struct bnxt_en_dev *en_dev;
int rc = 0;
if (!rdev)
return -EINVAL;
en_dev = rdev->en_dev;
rc = en_dev->en_ops->bnxt_register_device(en_dev, BNXT_ROCE_ULP,
&bnxt_re_ulp_ops, rdev);
return rc;
}
RDMA/bnxt_re: Fix system crash during RDMA resource initialization bnxt_re_ib_reg acquires and releases the rtnl lock whenever it accesses the L2 driver. The following sequence can trigger a crash Acquires the rtnl_lock -> Registers roce driver callback with L2 driver -> release the rtnl lock bnxt_re acquires the rtnl_lock -> Request for MSIx vectors -> release the rtnl_lock Issue happens when bnxt_re proceeds with remaining part of initialization and L2 driver invokes bnxt_ulp_irq_stop as a part of bnxt_open_nic. The crash is in bnxt_qplib_nq_stop_irq as the NQ structures are not initialized yet, <snip> [ 3551.726647] BUG: unable to handle kernel NULL pointer dereference at (null) [ 3551.726656] IP: [<ffffffffc0840ee9>] bnxt_qplib_nq_stop_irq+0x59/0xb0 [bnxt_re] [ 3551.726674] PGD 0 [ 3551.726679] Oops: 0002 1 SMP ... [ 3551.726822] Hardware name: Dell Inc. PowerEdge R720/08RW36, BIOS 2.4.3 07/09/2014 [ 3551.726826] task: ffff97e30eec5ee0 ti: ffff97e3173bc000 task.ti: ffff97e3173bc000 [ 3551.726829] RIP: 0010:[<ffffffffc0840ee9>] [<ffffffffc0840ee9>] bnxt_qplib_nq_stop_irq+0x59/0xb0 [bnxt_re] ... [ 3551.726872] Call Trace: [ 3551.726886] [<ffffffffc082cb9e>] bnxt_re_stop_irq+0x4e/0x70 [bnxt_re] [ 3551.726899] [<ffffffffc07d6a53>] bnxt_ulp_irq_stop+0x43/0x70 [bnxt_en] [ 3551.726908] [<ffffffffc07c82f4>] bnxt_reserve_rings+0x174/0x1e0 [bnxt_en] [ 3551.726917] [<ffffffffc07cafd8>] __bnxt_open_nic+0x368/0x9a0 [bnxt_en] [ 3551.726925] [<ffffffffc07cb62b>] bnxt_open_nic+0x1b/0x50 [bnxt_en] [ 3551.726934] [<ffffffffc07cc62f>] bnxt_setup_mq_tc+0x11f/0x260 [bnxt_en] [ 3551.726943] [<ffffffffc07d5f58>] bnxt_dcbnl_ieee_setets+0xb8/0x1f0 [bnxt_en] [ 3551.726954] [<ffffffff890f983a>] dcbnl_ieee_set+0x9a/0x250 [ 3551.726966] [<ffffffff88fd6d21>] ? __alloc_skb+0xa1/0x2d0 [ 3551.726972] [<ffffffff890f72fa>] dcb_doit+0x13a/0x210 [ 3551.726981] [<ffffffff89003ff7>] rtnetlink_rcv_msg+0xa7/0x260 [ 3551.726989] [<ffffffff88ffdb00>] ? rtnl_unicast+0x20/0x30 [ 3551.726996] [<ffffffff88bf9dc8>] ? __kmalloc_node_track_caller+0x58/0x290 [ 3551.727002] [<ffffffff890f7326>] ? dcb_doit+0x166/0x210 [ 3551.727007] [<ffffffff88fd6d0d>] ? __alloc_skb+0x8d/0x2d0 [ 3551.727012] [<ffffffff89003f50>] ? rtnl_newlink+0x880/0x880 ... [ 3551.727104] [<ffffffff8911f7d5>] system_call_fastpath+0x1c/0x21 ... [ 3551.727164] RIP [<ffffffffc0840ee9>] bnxt_qplib_nq_stop_irq+0x59/0xb0 [bnxt_re] [ 3551.727175] RSP <ffff97e3173bf788> [ 3551.727177] CR2: 0000000000000000 Avoid this inconsistent state and system crash by acquiring the rtnl lock for the entire duration of device initialization. Re-factor the code to remove the rtnl lock from the individual function and acquire and release it from the caller. Fixes: 1ac5a4047975 ("RDMA/bnxt_re: Add bnxt_re RoCE driver") Fixes: 6e04b1035689 ("RDMA/bnxt_re: Fix broken RoCE driver due to recent L2 driver changes") Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-09-21 05:33:00 +00:00
static int bnxt_re_free_msix(struct bnxt_re_dev *rdev)
{
struct bnxt_en_dev *en_dev;
int rc;
if (!rdev)
return -EINVAL;
en_dev = rdev->en_dev;
rc = en_dev->en_ops->bnxt_free_msix(rdev->en_dev, BNXT_ROCE_ULP);
return rc;
}
static int bnxt_re_request_msix(struct bnxt_re_dev *rdev)
{
int rc = 0, num_msix_want = BNXT_RE_MAX_MSIX, num_msix_got;
struct bnxt_en_dev *en_dev;
if (!rdev)
return -EINVAL;
en_dev = rdev->en_dev;
num_msix_want = min_t(u32, BNXT_RE_MAX_MSIX, num_online_cpus());
num_msix_got = en_dev->en_ops->bnxt_request_msix(en_dev, BNXT_ROCE_ULP,
rdev->msix_entries,
num_msix_want);
if (num_msix_got < BNXT_RE_MIN_MSIX) {
rc = -EINVAL;
goto done;
}
if (num_msix_got != num_msix_want) {
dev_warn(rdev_to_dev(rdev),
"Requested %d MSI-X vectors, got %d\n",
num_msix_want, num_msix_got);
}
rdev->num_msix = num_msix_got;
done:
return rc;
}
static void bnxt_re_init_hwrm_hdr(struct bnxt_re_dev *rdev, struct input *hdr,
u16 opcd, u16 crid, u16 trid)
{
hdr->req_type = cpu_to_le16(opcd);
hdr->cmpl_ring = cpu_to_le16(crid);
hdr->target_id = cpu_to_le16(trid);
}
static void bnxt_re_fill_fw_msg(struct bnxt_fw_msg *fw_msg, void *msg,
int msg_len, void *resp, int resp_max_len,
int timeout)
{
fw_msg->msg = msg;
fw_msg->msg_len = msg_len;
fw_msg->resp = resp;
fw_msg->resp_max_len = resp_max_len;
fw_msg->timeout = timeout;
}
RDMA/bnxt_re: Fix system crash during RDMA resource initialization bnxt_re_ib_reg acquires and releases the rtnl lock whenever it accesses the L2 driver. The following sequence can trigger a crash Acquires the rtnl_lock -> Registers roce driver callback with L2 driver -> release the rtnl lock bnxt_re acquires the rtnl_lock -> Request for MSIx vectors -> release the rtnl_lock Issue happens when bnxt_re proceeds with remaining part of initialization and L2 driver invokes bnxt_ulp_irq_stop as a part of bnxt_open_nic. The crash is in bnxt_qplib_nq_stop_irq as the NQ structures are not initialized yet, <snip> [ 3551.726647] BUG: unable to handle kernel NULL pointer dereference at (null) [ 3551.726656] IP: [<ffffffffc0840ee9>] bnxt_qplib_nq_stop_irq+0x59/0xb0 [bnxt_re] [ 3551.726674] PGD 0 [ 3551.726679] Oops: 0002 1 SMP ... [ 3551.726822] Hardware name: Dell Inc. PowerEdge R720/08RW36, BIOS 2.4.3 07/09/2014 [ 3551.726826] task: ffff97e30eec5ee0 ti: ffff97e3173bc000 task.ti: ffff97e3173bc000 [ 3551.726829] RIP: 0010:[<ffffffffc0840ee9>] [<ffffffffc0840ee9>] bnxt_qplib_nq_stop_irq+0x59/0xb0 [bnxt_re] ... [ 3551.726872] Call Trace: [ 3551.726886] [<ffffffffc082cb9e>] bnxt_re_stop_irq+0x4e/0x70 [bnxt_re] [ 3551.726899] [<ffffffffc07d6a53>] bnxt_ulp_irq_stop+0x43/0x70 [bnxt_en] [ 3551.726908] [<ffffffffc07c82f4>] bnxt_reserve_rings+0x174/0x1e0 [bnxt_en] [ 3551.726917] [<ffffffffc07cafd8>] __bnxt_open_nic+0x368/0x9a0 [bnxt_en] [ 3551.726925] [<ffffffffc07cb62b>] bnxt_open_nic+0x1b/0x50 [bnxt_en] [ 3551.726934] [<ffffffffc07cc62f>] bnxt_setup_mq_tc+0x11f/0x260 [bnxt_en] [ 3551.726943] [<ffffffffc07d5f58>] bnxt_dcbnl_ieee_setets+0xb8/0x1f0 [bnxt_en] [ 3551.726954] [<ffffffff890f983a>] dcbnl_ieee_set+0x9a/0x250 [ 3551.726966] [<ffffffff88fd6d21>] ? __alloc_skb+0xa1/0x2d0 [ 3551.726972] [<ffffffff890f72fa>] dcb_doit+0x13a/0x210 [ 3551.726981] [<ffffffff89003ff7>] rtnetlink_rcv_msg+0xa7/0x260 [ 3551.726989] [<ffffffff88ffdb00>] ? rtnl_unicast+0x20/0x30 [ 3551.726996] [<ffffffff88bf9dc8>] ? __kmalloc_node_track_caller+0x58/0x290 [ 3551.727002] [<ffffffff890f7326>] ? dcb_doit+0x166/0x210 [ 3551.727007] [<ffffffff88fd6d0d>] ? __alloc_skb+0x8d/0x2d0 [ 3551.727012] [<ffffffff89003f50>] ? rtnl_newlink+0x880/0x880 ... [ 3551.727104] [<ffffffff8911f7d5>] system_call_fastpath+0x1c/0x21 ... [ 3551.727164] RIP [<ffffffffc0840ee9>] bnxt_qplib_nq_stop_irq+0x59/0xb0 [bnxt_re] [ 3551.727175] RSP <ffff97e3173bf788> [ 3551.727177] CR2: 0000000000000000 Avoid this inconsistent state and system crash by acquiring the rtnl lock for the entire duration of device initialization. Re-factor the code to remove the rtnl lock from the individual function and acquire and release it from the caller. Fixes: 1ac5a4047975 ("RDMA/bnxt_re: Add bnxt_re RoCE driver") Fixes: 6e04b1035689 ("RDMA/bnxt_re: Fix broken RoCE driver due to recent L2 driver changes") Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-09-21 05:33:00 +00:00
static int bnxt_re_net_ring_free(struct bnxt_re_dev *rdev, u16 fw_ring_id)
{
struct bnxt_en_dev *en_dev = rdev->en_dev;
struct hwrm_ring_free_input req = {0};
struct hwrm_ring_free_output resp;
struct bnxt_fw_msg fw_msg;
int rc = -EINVAL;
if (!en_dev)
return rc;
memset(&fw_msg, 0, sizeof(fw_msg));
bnxt_re_init_hwrm_hdr(rdev, (void *)&req, HWRM_RING_FREE, -1, -1);
req.ring_type = RING_ALLOC_REQ_RING_TYPE_L2_CMPL;
req.ring_id = cpu_to_le16(fw_ring_id);
bnxt_re_fill_fw_msg(&fw_msg, (void *)&req, sizeof(req), (void *)&resp,
sizeof(resp), DFLT_HWRM_CMD_TIMEOUT);
rc = en_dev->en_ops->bnxt_send_fw_msg(en_dev, BNXT_ROCE_ULP, &fw_msg);
if (rc)
dev_err(rdev_to_dev(rdev),
"Failed to free HW ring:%d :%#x", req.ring_id, rc);
return rc;
}
static int bnxt_re_net_ring_alloc(struct bnxt_re_dev *rdev, dma_addr_t *dma_arr,
int pages, int type, u32 ring_mask,
u32 map_index, u16 *fw_ring_id)
{
struct bnxt_en_dev *en_dev = rdev->en_dev;
struct hwrm_ring_alloc_input req = {0};
struct hwrm_ring_alloc_output resp;
struct bnxt_fw_msg fw_msg;
int rc = -EINVAL;
if (!en_dev)
return rc;
memset(&fw_msg, 0, sizeof(fw_msg));
bnxt_re_init_hwrm_hdr(rdev, (void *)&req, HWRM_RING_ALLOC, -1, -1);
req.enables = 0;
req.page_tbl_addr = cpu_to_le64(dma_arr[0]);
if (pages > 1) {
/* Page size is in log2 units */
req.page_size = BNXT_PAGE_SHIFT;
req.page_tbl_depth = 1;
}
req.fbo = 0;
/* Association of ring index with doorbell index and MSIX number */
req.logical_id = cpu_to_le16(map_index);
req.length = cpu_to_le32(ring_mask + 1);
req.ring_type = RING_ALLOC_REQ_RING_TYPE_L2_CMPL;
req.int_mode = RING_ALLOC_REQ_INT_MODE_MSIX;
bnxt_re_fill_fw_msg(&fw_msg, (void *)&req, sizeof(req), (void *)&resp,
sizeof(resp), DFLT_HWRM_CMD_TIMEOUT);
rc = en_dev->en_ops->bnxt_send_fw_msg(en_dev, BNXT_ROCE_ULP, &fw_msg);
if (!rc)
*fw_ring_id = le16_to_cpu(resp.ring_id);
return rc;
}
static int bnxt_re_net_stats_ctx_free(struct bnxt_re_dev *rdev,
RDMA/bnxt_re: Fix system crash during RDMA resource initialization bnxt_re_ib_reg acquires and releases the rtnl lock whenever it accesses the L2 driver. The following sequence can trigger a crash Acquires the rtnl_lock -> Registers roce driver callback with L2 driver -> release the rtnl lock bnxt_re acquires the rtnl_lock -> Request for MSIx vectors -> release the rtnl_lock Issue happens when bnxt_re proceeds with remaining part of initialization and L2 driver invokes bnxt_ulp_irq_stop as a part of bnxt_open_nic. The crash is in bnxt_qplib_nq_stop_irq as the NQ structures are not initialized yet, <snip> [ 3551.726647] BUG: unable to handle kernel NULL pointer dereference at (null) [ 3551.726656] IP: [<ffffffffc0840ee9>] bnxt_qplib_nq_stop_irq+0x59/0xb0 [bnxt_re] [ 3551.726674] PGD 0 [ 3551.726679] Oops: 0002 1 SMP ... [ 3551.726822] Hardware name: Dell Inc. PowerEdge R720/08RW36, BIOS 2.4.3 07/09/2014 [ 3551.726826] task: ffff97e30eec5ee0 ti: ffff97e3173bc000 task.ti: ffff97e3173bc000 [ 3551.726829] RIP: 0010:[<ffffffffc0840ee9>] [<ffffffffc0840ee9>] bnxt_qplib_nq_stop_irq+0x59/0xb0 [bnxt_re] ... [ 3551.726872] Call Trace: [ 3551.726886] [<ffffffffc082cb9e>] bnxt_re_stop_irq+0x4e/0x70 [bnxt_re] [ 3551.726899] [<ffffffffc07d6a53>] bnxt_ulp_irq_stop+0x43/0x70 [bnxt_en] [ 3551.726908] [<ffffffffc07c82f4>] bnxt_reserve_rings+0x174/0x1e0 [bnxt_en] [ 3551.726917] [<ffffffffc07cafd8>] __bnxt_open_nic+0x368/0x9a0 [bnxt_en] [ 3551.726925] [<ffffffffc07cb62b>] bnxt_open_nic+0x1b/0x50 [bnxt_en] [ 3551.726934] [<ffffffffc07cc62f>] bnxt_setup_mq_tc+0x11f/0x260 [bnxt_en] [ 3551.726943] [<ffffffffc07d5f58>] bnxt_dcbnl_ieee_setets+0xb8/0x1f0 [bnxt_en] [ 3551.726954] [<ffffffff890f983a>] dcbnl_ieee_set+0x9a/0x250 [ 3551.726966] [<ffffffff88fd6d21>] ? __alloc_skb+0xa1/0x2d0 [ 3551.726972] [<ffffffff890f72fa>] dcb_doit+0x13a/0x210 [ 3551.726981] [<ffffffff89003ff7>] rtnetlink_rcv_msg+0xa7/0x260 [ 3551.726989] [<ffffffff88ffdb00>] ? rtnl_unicast+0x20/0x30 [ 3551.726996] [<ffffffff88bf9dc8>] ? __kmalloc_node_track_caller+0x58/0x290 [ 3551.727002] [<ffffffff890f7326>] ? dcb_doit+0x166/0x210 [ 3551.727007] [<ffffffff88fd6d0d>] ? __alloc_skb+0x8d/0x2d0 [ 3551.727012] [<ffffffff89003f50>] ? rtnl_newlink+0x880/0x880 ... [ 3551.727104] [<ffffffff8911f7d5>] system_call_fastpath+0x1c/0x21 ... [ 3551.727164] RIP [<ffffffffc0840ee9>] bnxt_qplib_nq_stop_irq+0x59/0xb0 [bnxt_re] [ 3551.727175] RSP <ffff97e3173bf788> [ 3551.727177] CR2: 0000000000000000 Avoid this inconsistent state and system crash by acquiring the rtnl lock for the entire duration of device initialization. Re-factor the code to remove the rtnl lock from the individual function and acquire and release it from the caller. Fixes: 1ac5a4047975 ("RDMA/bnxt_re: Add bnxt_re RoCE driver") Fixes: 6e04b1035689 ("RDMA/bnxt_re: Fix broken RoCE driver due to recent L2 driver changes") Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-09-21 05:33:00 +00:00
u32 fw_stats_ctx_id)
{
struct bnxt_en_dev *en_dev = rdev->en_dev;
struct hwrm_stat_ctx_free_input req = {0};
struct bnxt_fw_msg fw_msg;
int rc = -EINVAL;
if (!en_dev)
return rc;
memset(&fw_msg, 0, sizeof(fw_msg));
bnxt_re_init_hwrm_hdr(rdev, (void *)&req, HWRM_STAT_CTX_FREE, -1, -1);
req.stat_ctx_id = cpu_to_le32(fw_stats_ctx_id);
bnxt_re_fill_fw_msg(&fw_msg, (void *)&req, sizeof(req), (void *)&req,
sizeof(req), DFLT_HWRM_CMD_TIMEOUT);
rc = en_dev->en_ops->bnxt_send_fw_msg(en_dev, BNXT_ROCE_ULP, &fw_msg);
if (rc)
dev_err(rdev_to_dev(rdev),
"Failed to free HW stats context %#x", rc);
return rc;
}
static int bnxt_re_net_stats_ctx_alloc(struct bnxt_re_dev *rdev,
dma_addr_t dma_map,
u32 *fw_stats_ctx_id)
{
struct hwrm_stat_ctx_alloc_output resp = {0};
struct hwrm_stat_ctx_alloc_input req = {0};
struct bnxt_en_dev *en_dev = rdev->en_dev;
struct bnxt_fw_msg fw_msg;
int rc = -EINVAL;
*fw_stats_ctx_id = INVALID_STATS_CTX_ID;
if (!en_dev)
return rc;
memset(&fw_msg, 0, sizeof(fw_msg));
bnxt_re_init_hwrm_hdr(rdev, (void *)&req, HWRM_STAT_CTX_ALLOC, -1, -1);
req.update_period_ms = cpu_to_le32(1000);
req.stats_dma_addr = cpu_to_le64(dma_map);
req.stat_ctx_flags = STAT_CTX_ALLOC_REQ_STAT_CTX_FLAGS_ROCE;
bnxt_re_fill_fw_msg(&fw_msg, (void *)&req, sizeof(req), (void *)&resp,
sizeof(resp), DFLT_HWRM_CMD_TIMEOUT);
rc = en_dev->en_ops->bnxt_send_fw_msg(en_dev, BNXT_ROCE_ULP, &fw_msg);
if (!rc)
*fw_stats_ctx_id = le32_to_cpu(resp.stat_ctx_id);
return rc;
}
/* Device */
static bool is_bnxt_re_dev(struct net_device *netdev)
{
struct ethtool_drvinfo drvinfo;
if (netdev->ethtool_ops && netdev->ethtool_ops->get_drvinfo) {
memset(&drvinfo, 0, sizeof(drvinfo));
netdev->ethtool_ops->get_drvinfo(netdev, &drvinfo);
if (strcmp(drvinfo.driver, "bnxt_en"))
return false;
return true;
}
return false;
}
static struct bnxt_re_dev *bnxt_re_from_netdev(struct net_device *netdev)
{
struct bnxt_re_dev *rdev;
rcu_read_lock();
list_for_each_entry_rcu(rdev, &bnxt_re_dev_list, list) {
if (rdev->netdev == netdev) {
rcu_read_unlock();
return rdev;
}
}
rcu_read_unlock();
return NULL;
}
static void bnxt_re_dev_unprobe(struct net_device *netdev,
struct bnxt_en_dev *en_dev)
{
dev_put(netdev);
module_put(en_dev->pdev->driver->driver.owner);
}
static struct bnxt_en_dev *bnxt_re_dev_probe(struct net_device *netdev)
{
struct bnxt *bp = netdev_priv(netdev);
struct bnxt_en_dev *en_dev;
struct pci_dev *pdev;
/* Call bnxt_en's RoCE probe via indirect API */
if (!bp->ulp_probe)
return ERR_PTR(-EINVAL);
en_dev = bp->ulp_probe(netdev);
if (IS_ERR(en_dev))
return en_dev;
pdev = en_dev->pdev;
if (!pdev)
return ERR_PTR(-EINVAL);
if (!(en_dev->flags & BNXT_EN_FLAG_ROCE_CAP)) {
dev_info(&pdev->dev,
"%s: probe error: RoCE is not supported on this device",
ROCE_DRV_MODULE_NAME);
return ERR_PTR(-ENODEV);
}
/* Bump net device reference count */
if (!try_module_get(pdev->driver->driver.owner))
return ERR_PTR(-ENODEV);
dev_hold(netdev);
return en_dev;
}
static ssize_t hw_rev_show(struct device *device, struct device_attribute *attr,
char *buf)
{
struct bnxt_re_dev *rdev = to_bnxt_re_dev(device, ibdev.dev);
return scnprintf(buf, PAGE_SIZE, "0x%x\n", rdev->en_dev->pdev->vendor);
}
static DEVICE_ATTR_RO(hw_rev);
static ssize_t hca_type_show(struct device *device,
struct device_attribute *attr, char *buf)
{
struct bnxt_re_dev *rdev = to_bnxt_re_dev(device, ibdev.dev);
return scnprintf(buf, PAGE_SIZE, "%s\n", rdev->ibdev.node_desc);
}
static DEVICE_ATTR_RO(hca_type);
static struct attribute *bnxt_re_attributes[] = {
&dev_attr_hw_rev.attr,
&dev_attr_hca_type.attr,
NULL
};
static const struct attribute_group bnxt_re_dev_attr_group = {
.attrs = bnxt_re_attributes,
};
static void bnxt_re_unregister_ib(struct bnxt_re_dev *rdev)
{
ib_unregister_device(&rdev->ibdev);
}
static int bnxt_re_register_ib(struct bnxt_re_dev *rdev)
{
struct ib_device *ibdev = &rdev->ibdev;
/* ib device init */
ibdev->owner = THIS_MODULE;
ibdev->node_type = RDMA_NODE_IB_CA;
strlcpy(ibdev->node_desc, BNXT_RE_DESC " HCA",
strlen(BNXT_RE_DESC) + 5);
ibdev->phys_port_cnt = 1;
bnxt_qplib_get_guid(rdev->netdev->dev_addr, (u8 *)&ibdev->node_guid);
ibdev->num_comp_vectors = 1;
This is a tree wide change and has been kept separate for that reason. Bart Van Assche noted that the ib DMA mapping code was significantly similar enough to the core DMA mapping code that with a few changes it was possible to remove the IB DMA mapping code entirely and switch the RDMA stack to use the core DMA mapping code. This resulted in a nice set of cleanups, but touched the entire tree. This branch will be submitted separately to Linus at the end of the merge window as per normal practice for tree wide changes like this. -----BEGIN PGP SIGNATURE----- iQIcBAABAgAGBQJYo06oAAoJELgmozMOVy/d9Z8QALedWHdu98St1L0u2c8sxnR9 2zo/4sF5Vb9u7FpmdIX32L4SQ9s9KhPE8Qp8NtZLf9v10zlDebIRJDpXknXtKooV CAXxX4sxBXV27/UrhbZEfXiPrmm6ccJFyIfRnMU6NlMqh2AtAsRa5AC2/RMp8oUD Med97PFiF0o6TD22/UH1VFbRpX1zjaKyqm7a3as5sJfzNA+UGIZAQ7Euz8000DKZ xCgVLTEwS0FmOujtBkCst7xa9TjuqR1HLOB4DdGvAhP6BHdz2yamM7Qmh9NN+NEX 0BtjsuXomtn6j6AszGC+bpipCZh3NUigcwoFAARXCYFHibBvo4DPdFeGsraFgXdy 1+KyR8CCeQG3Aly5Vwr264RFPGkGpwMj8PsBlXgQVtrlg4rriaCzOJNmIIbfdADw ftqhxBOzReZw77aH2s+9p2ILRfcAmPqhynLvFGFo9LBvsik8LVso7YgZN0xGxwcI IjI/XGC8UskPVsIZBIYA6sl2bYzgOjtBIHiXjRrPlW3uhduIXLrvKFfLPP/5XLAG ehLXK+J0bfsyY9ClmlNS8oH/WdLhXAyy/KNmnj5bRRm9qg6BRJR3bsOBhZJODuoC XgEXFfF6/7roNESWxowff7pK0rTkRg/m/Pa4VQpeO+6NWHE7kgZhL6kyIp5nKcwS 3e7mgpcwC+3XfA/6vU3F =e0Si -----END PGP SIGNATURE----- Merge tag 'for-next-dma_ops' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma Pull rdma DMA mapping updates from Doug Ledford: "Drop IB DMA mapping code and use core DMA code instead. Bart Van Assche noted that the ib DMA mapping code was significantly similar enough to the core DMA mapping code that with a few changes it was possible to remove the IB DMA mapping code entirely and switch the RDMA stack to use the core DMA mapping code. This resulted in a nice set of cleanups, but touched the entire tree and has been kept separate for that reason." * tag 'for-next-dma_ops' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: (37 commits) IB/rxe, IB/rdmavt: Use dma_virt_ops instead of duplicating it IB/core: Remove ib_device.dma_device nvme-rdma: Switch from dma_device to dev.parent RDS: net: Switch from dma_device to dev.parent IB/srpt: Modify a debug statement IB/srp: Switch from dma_device to dev.parent IB/iser: Switch from dma_device to dev.parent IB/IPoIB: Switch from dma_device to dev.parent IB/rxe: Switch from dma_device to dev.parent IB/vmw_pvrdma: Switch from dma_device to dev.parent IB/usnic: Switch from dma_device to dev.parent IB/qib: Switch from dma_device to dev.parent IB/qedr: Switch from dma_device to dev.parent IB/ocrdma: Switch from dma_device to dev.parent IB/nes: Remove a superfluous assignment statement IB/mthca: Switch from dma_device to dev.parent IB/mlx5: Switch from dma_device to dev.parent IB/mlx4: Switch from dma_device to dev.parent IB/i40iw: Remove a superfluous assignment statement IB/hns: Switch from dma_device to dev.parent ...
2017-02-25 21:45:43 +00:00
ibdev->dev.parent = &rdev->en_dev->pdev->dev;
ibdev->local_dma_lkey = BNXT_QPLIB_RSVD_LKEY;
/* User space */
ibdev->uverbs_abi_ver = BNXT_RE_ABI_VERSION;
ibdev->uverbs_cmd_mask =
(1ull << IB_USER_VERBS_CMD_GET_CONTEXT) |
(1ull << IB_USER_VERBS_CMD_QUERY_DEVICE) |
(1ull << IB_USER_VERBS_CMD_QUERY_PORT) |
(1ull << IB_USER_VERBS_CMD_ALLOC_PD) |
(1ull << IB_USER_VERBS_CMD_DEALLOC_PD) |
(1ull << IB_USER_VERBS_CMD_REG_MR) |
(1ull << IB_USER_VERBS_CMD_REREG_MR) |
(1ull << IB_USER_VERBS_CMD_DEREG_MR) |
(1ull << IB_USER_VERBS_CMD_CREATE_COMP_CHANNEL) |
(1ull << IB_USER_VERBS_CMD_CREATE_CQ) |
(1ull << IB_USER_VERBS_CMD_RESIZE_CQ) |
(1ull << IB_USER_VERBS_CMD_DESTROY_CQ) |
(1ull << IB_USER_VERBS_CMD_CREATE_QP) |
(1ull << IB_USER_VERBS_CMD_MODIFY_QP) |
(1ull << IB_USER_VERBS_CMD_QUERY_QP) |
(1ull << IB_USER_VERBS_CMD_DESTROY_QP) |
(1ull << IB_USER_VERBS_CMD_CREATE_SRQ) |
(1ull << IB_USER_VERBS_CMD_MODIFY_SRQ) |
(1ull << IB_USER_VERBS_CMD_QUERY_SRQ) |
(1ull << IB_USER_VERBS_CMD_DESTROY_SRQ) |
(1ull << IB_USER_VERBS_CMD_CREATE_AH) |
(1ull << IB_USER_VERBS_CMD_MODIFY_AH) |
(1ull << IB_USER_VERBS_CMD_QUERY_AH) |
(1ull << IB_USER_VERBS_CMD_DESTROY_AH);
/* POLL_CQ and REQ_NOTIFY_CQ is directly handled in libbnxt_re */
/* Kernel verbs */
ibdev->query_device = bnxt_re_query_device;
ibdev->modify_device = bnxt_re_modify_device;
ibdev->query_port = bnxt_re_query_port;
ibdev->get_port_immutable = bnxt_re_get_port_immutable;
ibdev->get_dev_fw_str = bnxt_re_query_fw_str;
ibdev->query_pkey = bnxt_re_query_pkey;
ibdev->get_netdev = bnxt_re_get_netdev;
ibdev->add_gid = bnxt_re_add_gid;
ibdev->del_gid = bnxt_re_del_gid;
ibdev->get_link_layer = bnxt_re_get_link_layer;
ibdev->alloc_pd = bnxt_re_alloc_pd;
ibdev->dealloc_pd = bnxt_re_dealloc_pd;
ibdev->create_ah = bnxt_re_create_ah;
ibdev->modify_ah = bnxt_re_modify_ah;
ibdev->query_ah = bnxt_re_query_ah;
ibdev->destroy_ah = bnxt_re_destroy_ah;
ibdev->create_srq = bnxt_re_create_srq;
ibdev->modify_srq = bnxt_re_modify_srq;
ibdev->query_srq = bnxt_re_query_srq;
ibdev->destroy_srq = bnxt_re_destroy_srq;
ibdev->post_srq_recv = bnxt_re_post_srq_recv;
ibdev->create_qp = bnxt_re_create_qp;
ibdev->modify_qp = bnxt_re_modify_qp;
ibdev->query_qp = bnxt_re_query_qp;
ibdev->destroy_qp = bnxt_re_destroy_qp;
ibdev->post_send = bnxt_re_post_send;
ibdev->post_recv = bnxt_re_post_recv;
ibdev->create_cq = bnxt_re_create_cq;
ibdev->destroy_cq = bnxt_re_destroy_cq;
ibdev->poll_cq = bnxt_re_poll_cq;
ibdev->req_notify_cq = bnxt_re_req_notify_cq;
ibdev->get_dma_mr = bnxt_re_get_dma_mr;
ibdev->dereg_mr = bnxt_re_dereg_mr;
ibdev->alloc_mr = bnxt_re_alloc_mr;
ibdev->map_mr_sg = bnxt_re_map_mr_sg;
ibdev->reg_user_mr = bnxt_re_reg_user_mr;
ibdev->alloc_ucontext = bnxt_re_alloc_ucontext;
ibdev->dealloc_ucontext = bnxt_re_dealloc_ucontext;
ibdev->mmap = bnxt_re_mmap;
ibdev->get_hw_stats = bnxt_re_ib_get_hw_stats;
ibdev->alloc_hw_stats = bnxt_re_ib_alloc_hw_stats;
rdma_set_device_sysfs_group(ibdev, &bnxt_re_dev_attr_group);
ibdev->driver_id = RDMA_DRIVER_BNXT_RE;
return ib_register_device(ibdev, "bnxt_re%d", NULL);
}
static void bnxt_re_dev_remove(struct bnxt_re_dev *rdev)
{
dev_put(rdev->netdev);
rdev->netdev = NULL;
mutex_lock(&bnxt_re_dev_lock);
list_del_rcu(&rdev->list);
mutex_unlock(&bnxt_re_dev_lock);
synchronize_rcu();
ib_dealloc_device(&rdev->ibdev);
/* rdev is gone */
}
static struct bnxt_re_dev *bnxt_re_dev_add(struct net_device *netdev,
struct bnxt_en_dev *en_dev)
{
struct bnxt_re_dev *rdev;
/* Allocate bnxt_re_dev instance here */
rdev = (struct bnxt_re_dev *)ib_alloc_device(sizeof(*rdev));
if (!rdev) {
dev_err(NULL, "%s: bnxt_re_dev allocation failure!",
ROCE_DRV_MODULE_NAME);
return NULL;
}
/* Default values */
rdev->netdev = netdev;
dev_hold(rdev->netdev);
rdev->en_dev = en_dev;
rdev->id = rdev->en_dev->pdev->devfn;
INIT_LIST_HEAD(&rdev->qp_list);
mutex_init(&rdev->qp_lock);
atomic_set(&rdev->qp_count, 0);
atomic_set(&rdev->cq_count, 0);
atomic_set(&rdev->srq_count, 0);
atomic_set(&rdev->mr_count, 0);
atomic_set(&rdev->mw_count, 0);
rdev->cosq[0] = 0xFFFF;
rdev->cosq[1] = 0xFFFF;
mutex_lock(&bnxt_re_dev_lock);
list_add_tail_rcu(&rdev->list, &bnxt_re_dev_list);
mutex_unlock(&bnxt_re_dev_lock);
return rdev;
}
static int bnxt_re_handle_unaffi_async_event(struct creq_func_event
*unaffi_async)
{
switch (unaffi_async->event) {
case CREQ_FUNC_EVENT_EVENT_TX_WQE_ERROR:
break;
case CREQ_FUNC_EVENT_EVENT_TX_DATA_ERROR:
break;
case CREQ_FUNC_EVENT_EVENT_RX_WQE_ERROR:
break;
case CREQ_FUNC_EVENT_EVENT_RX_DATA_ERROR:
break;
case CREQ_FUNC_EVENT_EVENT_CQ_ERROR:
break;
case CREQ_FUNC_EVENT_EVENT_TQM_ERROR:
break;
case CREQ_FUNC_EVENT_EVENT_CFCQ_ERROR:
break;
case CREQ_FUNC_EVENT_EVENT_CFCS_ERROR:
break;
case CREQ_FUNC_EVENT_EVENT_CFCC_ERROR:
break;
case CREQ_FUNC_EVENT_EVENT_CFCM_ERROR:
break;
case CREQ_FUNC_EVENT_EVENT_TIM_ERROR:
break;
default:
return -EINVAL;
}
return 0;
}
static int bnxt_re_handle_qp_async_event(struct creq_qp_event *qp_event,
struct bnxt_re_qp *qp)
{
struct ib_event event;
RDMA/bnxt_re: Avoid Hard lockup during error CQE processing Hitting the following hardlockup due to a race condition in error CQE processing. [26146.879798] bnxt_en 0000:04:00.0: QPLIB: FP: CQ Processed Req [26146.886346] bnxt_en 0000:04:00.0: QPLIB: wr_id[1251] = 0x0 with status 0xa [26156.350935] NMI watchdog: Watchdog detected hard LOCKUP on cpu 4 [26156.357470] Modules linked in: nfsd auth_rpcgss nfs_acl lockd grace [26156.447957] CPU: 4 PID: 3413 Comm: kworker/4:1H Kdump: loaded [26156.457994] Hardware name: Dell Inc. PowerEdge R430/0CN7X8, [26156.466390] Workqueue: ib-comp-wq ib_cq_poll_work [ib_core] [26156.472639] Call Trace: [26156.475379] <NMI> [<ffffffff98d0d722>] dump_stack+0x19/0x1b [26156.481833] [<ffffffff9873f775>] watchdog_overflow_callback+0x135/0x140 [26156.489341] [<ffffffff9877f237>] __perf_event_overflow+0x57/0x100 [26156.496256] [<ffffffff98787c24>] perf_event_overflow+0x14/0x20 [26156.502887] [<ffffffff9860a580>] intel_pmu_handle_irq+0x220/0x510 [26156.509813] [<ffffffff98d16031>] perf_event_nmi_handler+0x31/0x50 [26156.516738] [<ffffffff98d1790c>] nmi_handle.isra.0+0x8c/0x150 [26156.523273] [<ffffffff98d17be8>] do_nmi+0x218/0x460 [26156.528834] [<ffffffff98d16d79>] end_repeat_nmi+0x1e/0x7e [26156.534980] [<ffffffff987089c0>] ? native_queued_spin_lock_slowpath+0x1d0/0x200 [26156.543268] [<ffffffff987089c0>] ? native_queued_spin_lock_slowpath+0x1d0/0x200 [26156.551556] [<ffffffff987089c0>] ? native_queued_spin_lock_slowpath+0x1d0/0x200 [26156.559842] <EOE> [<ffffffff98d083e4>] queued_spin_lock_slowpath+0xb/0xf [26156.567555] [<ffffffff98d15690>] _raw_spin_lock+0x20/0x30 [26156.573696] [<ffffffffc08381a1>] bnxt_qplib_lock_buddy_cq+0x31/0x40 [bnxt_re] [26156.581789] [<ffffffffc083bbaa>] bnxt_qplib_poll_cq+0x43a/0xf10 [bnxt_re] [26156.589493] [<ffffffffc083239b>] bnxt_re_poll_cq+0x9b/0x760 [bnxt_re] The issue happens if RQ poll_cq or SQ poll_cq or Async error event tries to put the error QP in flush list. Since SQ and RQ of each error qp are added to two different flush list, we need to protect it using locks of corresponding CQs. Difference in order of acquiring the lock in SQ poll_cq and RQ poll_cq can cause a hard lockup. Revisits the locking strategy and removes the usage of qplib_cq.hwq.lock. Instead of this lock, introduces qplib_cq.flush_lock to handle addition/deletion of QPs in flush list. Also, always invoke the flush_lock in order (SQ CQ lock first and then RQ CQ lock) to avoid any potential deadlock. Other than the poll_cq context, the movement of QP to/from flush list can be done in modify_qp context or from an async error event from HW. Synchronize these operations using the bnxt_re verbs layer CQ locks. To achieve this, adds a call back to the HW abstraction layer(qplib) to bnxt_re ib_verbs layer in case of async error event. Also, removes the buddy cq functions as it is no longer required. Signed-off-by: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com> Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com> Signed-off-by: Devesh Sharma <devesh.sharma@broadcom.com> Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-03-06 05:49:28 +00:00
unsigned int flags;
if (qp->qplib_qp.state == CMDQ_MODIFY_QP_NEW_STATE_ERR) {
flags = bnxt_re_lock_cqs(qp);
bnxt_qplib_add_flush_qp(&qp->qplib_qp);
bnxt_re_unlock_cqs(qp, flags);
}
memset(&event, 0, sizeof(event));
if (qp->qplib_qp.srq) {
event.device = &qp->rdev->ibdev;
event.element.qp = &qp->ib_qp;
event.event = IB_EVENT_QP_LAST_WQE_REACHED;
}
if (event.device && qp->ib_qp.event_handler)
qp->ib_qp.event_handler(&event, qp->ib_qp.qp_context);
return 0;
}
static int bnxt_re_handle_affi_async_event(struct creq_qp_event *affi_async,
void *obj)
{
int rc = 0;
u8 event;
if (!obj)
return rc; /* QP was already dead, still return success */
event = affi_async->event;
if (event == CREQ_QP_EVENT_EVENT_QP_ERROR_NOTIFICATION) {
struct bnxt_qplib_qp *lib_qp = obj;
struct bnxt_re_qp *qp = container_of(lib_qp, struct bnxt_re_qp,
qplib_qp);
rc = bnxt_re_handle_qp_async_event(affi_async, qp);
}
return rc;
}
static int bnxt_re_aeq_handler(struct bnxt_qplib_rcfw *rcfw,
void *aeqe, void *obj)
{
struct creq_qp_event *affi_async;
struct creq_func_event *unaffi_async;
u8 type;
int rc;
type = ((struct creq_base *)aeqe)->type;
if (type == CREQ_BASE_TYPE_FUNC_EVENT) {
unaffi_async = aeqe;
rc = bnxt_re_handle_unaffi_async_event(unaffi_async);
} else {
affi_async = aeqe;
rc = bnxt_re_handle_affi_async_event(affi_async, obj);
}
return rc;
}
static int bnxt_re_srqn_handler(struct bnxt_qplib_nq *nq,
struct bnxt_qplib_srq *handle, u8 event)
{
struct bnxt_re_srq *srq = container_of(handle, struct bnxt_re_srq,
qplib_srq);
struct ib_event ib_event;
int rc = 0;
if (!srq) {
dev_err(NULL, "%s: SRQ is NULL, SRQN not handled",
ROCE_DRV_MODULE_NAME);
rc = -EINVAL;
goto done;
}
ib_event.device = &srq->rdev->ibdev;
ib_event.element.srq = &srq->ib_srq;
if (event == NQ_SRQ_EVENT_EVENT_SRQ_THRESHOLD_EVENT)
ib_event.event = IB_EVENT_SRQ_LIMIT_REACHED;
else
ib_event.event = IB_EVENT_SRQ_ERR;
if (srq->ib_srq.event_handler) {
/* Lock event_handler? */
(*srq->ib_srq.event_handler)(&ib_event,
srq->ib_srq.srq_context);
}
done:
return rc;
}
static int bnxt_re_cqn_handler(struct bnxt_qplib_nq *nq,
struct bnxt_qplib_cq *handle)
{
struct bnxt_re_cq *cq = container_of(handle, struct bnxt_re_cq,
qplib_cq);
if (!cq) {
dev_err(NULL, "%s: CQ is NULL, CQN not handled",
ROCE_DRV_MODULE_NAME);
return -EINVAL;
}
if (cq->ib_cq.comp_handler) {
/* Lock comp_handler? */
(*cq->ib_cq.comp_handler)(&cq->ib_cq, cq->ib_cq.cq_context);
}
return 0;
}
static void bnxt_re_cleanup_res(struct bnxt_re_dev *rdev)
{
int i;
for (i = 1; i < rdev->num_msix; i++)
bnxt_qplib_disable_nq(&rdev->nq[i - 1]);
if (rdev->qplib_res.rcfw)
bnxt_qplib_cleanup_res(&rdev->qplib_res);
}
static int bnxt_re_init_res(struct bnxt_re_dev *rdev)
{
int rc = 0, i;
int num_vec_enabled = 0;
bnxt_qplib_init_res(&rdev->qplib_res);
for (i = 1; i < rdev->num_msix ; i++) {
rc = bnxt_qplib_enable_nq(rdev->en_dev->pdev, &rdev->nq[i - 1],
i - 1, rdev->msix_entries[i].vector,
rdev->msix_entries[i].db_offset,
&bnxt_re_cqn_handler,
&bnxt_re_srqn_handler);
if (rc) {
dev_err(rdev_to_dev(rdev),
"Failed to enable NQ with rc = 0x%x", rc);
goto fail;
}
num_vec_enabled++;
}
return 0;
fail:
for (i = num_vec_enabled; i >= 0; i--)
bnxt_qplib_disable_nq(&rdev->nq[i]);
return rc;
}
RDMA/bnxt_re: Fix system crash during RDMA resource initialization bnxt_re_ib_reg acquires and releases the rtnl lock whenever it accesses the L2 driver. The following sequence can trigger a crash Acquires the rtnl_lock -> Registers roce driver callback with L2 driver -> release the rtnl lock bnxt_re acquires the rtnl_lock -> Request for MSIx vectors -> release the rtnl_lock Issue happens when bnxt_re proceeds with remaining part of initialization and L2 driver invokes bnxt_ulp_irq_stop as a part of bnxt_open_nic. The crash is in bnxt_qplib_nq_stop_irq as the NQ structures are not initialized yet, <snip> [ 3551.726647] BUG: unable to handle kernel NULL pointer dereference at (null) [ 3551.726656] IP: [<ffffffffc0840ee9>] bnxt_qplib_nq_stop_irq+0x59/0xb0 [bnxt_re] [ 3551.726674] PGD 0 [ 3551.726679] Oops: 0002 1 SMP ... [ 3551.726822] Hardware name: Dell Inc. PowerEdge R720/08RW36, BIOS 2.4.3 07/09/2014 [ 3551.726826] task: ffff97e30eec5ee0 ti: ffff97e3173bc000 task.ti: ffff97e3173bc000 [ 3551.726829] RIP: 0010:[<ffffffffc0840ee9>] [<ffffffffc0840ee9>] bnxt_qplib_nq_stop_irq+0x59/0xb0 [bnxt_re] ... [ 3551.726872] Call Trace: [ 3551.726886] [<ffffffffc082cb9e>] bnxt_re_stop_irq+0x4e/0x70 [bnxt_re] [ 3551.726899] [<ffffffffc07d6a53>] bnxt_ulp_irq_stop+0x43/0x70 [bnxt_en] [ 3551.726908] [<ffffffffc07c82f4>] bnxt_reserve_rings+0x174/0x1e0 [bnxt_en] [ 3551.726917] [<ffffffffc07cafd8>] __bnxt_open_nic+0x368/0x9a0 [bnxt_en] [ 3551.726925] [<ffffffffc07cb62b>] bnxt_open_nic+0x1b/0x50 [bnxt_en] [ 3551.726934] [<ffffffffc07cc62f>] bnxt_setup_mq_tc+0x11f/0x260 [bnxt_en] [ 3551.726943] [<ffffffffc07d5f58>] bnxt_dcbnl_ieee_setets+0xb8/0x1f0 [bnxt_en] [ 3551.726954] [<ffffffff890f983a>] dcbnl_ieee_set+0x9a/0x250 [ 3551.726966] [<ffffffff88fd6d21>] ? __alloc_skb+0xa1/0x2d0 [ 3551.726972] [<ffffffff890f72fa>] dcb_doit+0x13a/0x210 [ 3551.726981] [<ffffffff89003ff7>] rtnetlink_rcv_msg+0xa7/0x260 [ 3551.726989] [<ffffffff88ffdb00>] ? rtnl_unicast+0x20/0x30 [ 3551.726996] [<ffffffff88bf9dc8>] ? __kmalloc_node_track_caller+0x58/0x290 [ 3551.727002] [<ffffffff890f7326>] ? dcb_doit+0x166/0x210 [ 3551.727007] [<ffffffff88fd6d0d>] ? __alloc_skb+0x8d/0x2d0 [ 3551.727012] [<ffffffff89003f50>] ? rtnl_newlink+0x880/0x880 ... [ 3551.727104] [<ffffffff8911f7d5>] system_call_fastpath+0x1c/0x21 ... [ 3551.727164] RIP [<ffffffffc0840ee9>] bnxt_qplib_nq_stop_irq+0x59/0xb0 [bnxt_re] [ 3551.727175] RSP <ffff97e3173bf788> [ 3551.727177] CR2: 0000000000000000 Avoid this inconsistent state and system crash by acquiring the rtnl lock for the entire duration of device initialization. Re-factor the code to remove the rtnl lock from the individual function and acquire and release it from the caller. Fixes: 1ac5a4047975 ("RDMA/bnxt_re: Add bnxt_re RoCE driver") Fixes: 6e04b1035689 ("RDMA/bnxt_re: Fix broken RoCE driver due to recent L2 driver changes") Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-09-21 05:33:00 +00:00
static void bnxt_re_free_nq_res(struct bnxt_re_dev *rdev)
{
int i;
for (i = 0; i < rdev->num_msix - 1; i++) {
RDMA/bnxt_re: Fix system crash during RDMA resource initialization bnxt_re_ib_reg acquires and releases the rtnl lock whenever it accesses the L2 driver. The following sequence can trigger a crash Acquires the rtnl_lock -> Registers roce driver callback with L2 driver -> release the rtnl lock bnxt_re acquires the rtnl_lock -> Request for MSIx vectors -> release the rtnl_lock Issue happens when bnxt_re proceeds with remaining part of initialization and L2 driver invokes bnxt_ulp_irq_stop as a part of bnxt_open_nic. The crash is in bnxt_qplib_nq_stop_irq as the NQ structures are not initialized yet, <snip> [ 3551.726647] BUG: unable to handle kernel NULL pointer dereference at (null) [ 3551.726656] IP: [<ffffffffc0840ee9>] bnxt_qplib_nq_stop_irq+0x59/0xb0 [bnxt_re] [ 3551.726674] PGD 0 [ 3551.726679] Oops: 0002 1 SMP ... [ 3551.726822] Hardware name: Dell Inc. PowerEdge R720/08RW36, BIOS 2.4.3 07/09/2014 [ 3551.726826] task: ffff97e30eec5ee0 ti: ffff97e3173bc000 task.ti: ffff97e3173bc000 [ 3551.726829] RIP: 0010:[<ffffffffc0840ee9>] [<ffffffffc0840ee9>] bnxt_qplib_nq_stop_irq+0x59/0xb0 [bnxt_re] ... [ 3551.726872] Call Trace: [ 3551.726886] [<ffffffffc082cb9e>] bnxt_re_stop_irq+0x4e/0x70 [bnxt_re] [ 3551.726899] [<ffffffffc07d6a53>] bnxt_ulp_irq_stop+0x43/0x70 [bnxt_en] [ 3551.726908] [<ffffffffc07c82f4>] bnxt_reserve_rings+0x174/0x1e0 [bnxt_en] [ 3551.726917] [<ffffffffc07cafd8>] __bnxt_open_nic+0x368/0x9a0 [bnxt_en] [ 3551.726925] [<ffffffffc07cb62b>] bnxt_open_nic+0x1b/0x50 [bnxt_en] [ 3551.726934] [<ffffffffc07cc62f>] bnxt_setup_mq_tc+0x11f/0x260 [bnxt_en] [ 3551.726943] [<ffffffffc07d5f58>] bnxt_dcbnl_ieee_setets+0xb8/0x1f0 [bnxt_en] [ 3551.726954] [<ffffffff890f983a>] dcbnl_ieee_set+0x9a/0x250 [ 3551.726966] [<ffffffff88fd6d21>] ? __alloc_skb+0xa1/0x2d0 [ 3551.726972] [<ffffffff890f72fa>] dcb_doit+0x13a/0x210 [ 3551.726981] [<ffffffff89003ff7>] rtnetlink_rcv_msg+0xa7/0x260 [ 3551.726989] [<ffffffff88ffdb00>] ? rtnl_unicast+0x20/0x30 [ 3551.726996] [<ffffffff88bf9dc8>] ? __kmalloc_node_track_caller+0x58/0x290 [ 3551.727002] [<ffffffff890f7326>] ? dcb_doit+0x166/0x210 [ 3551.727007] [<ffffffff88fd6d0d>] ? __alloc_skb+0x8d/0x2d0 [ 3551.727012] [<ffffffff89003f50>] ? rtnl_newlink+0x880/0x880 ... [ 3551.727104] [<ffffffff8911f7d5>] system_call_fastpath+0x1c/0x21 ... [ 3551.727164] RIP [<ffffffffc0840ee9>] bnxt_qplib_nq_stop_irq+0x59/0xb0 [bnxt_re] [ 3551.727175] RSP <ffff97e3173bf788> [ 3551.727177] CR2: 0000000000000000 Avoid this inconsistent state and system crash by acquiring the rtnl lock for the entire duration of device initialization. Re-factor the code to remove the rtnl lock from the individual function and acquire and release it from the caller. Fixes: 1ac5a4047975 ("RDMA/bnxt_re: Add bnxt_re RoCE driver") Fixes: 6e04b1035689 ("RDMA/bnxt_re: Fix broken RoCE driver due to recent L2 driver changes") Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-09-21 05:33:00 +00:00
bnxt_re_net_ring_free(rdev, rdev->nq[i].ring_id);
bnxt_qplib_free_nq(&rdev->nq[i]);
}
}
RDMA/bnxt_re: Fix system crash during RDMA resource initialization bnxt_re_ib_reg acquires and releases the rtnl lock whenever it accesses the L2 driver. The following sequence can trigger a crash Acquires the rtnl_lock -> Registers roce driver callback with L2 driver -> release the rtnl lock bnxt_re acquires the rtnl_lock -> Request for MSIx vectors -> release the rtnl_lock Issue happens when bnxt_re proceeds with remaining part of initialization and L2 driver invokes bnxt_ulp_irq_stop as a part of bnxt_open_nic. The crash is in bnxt_qplib_nq_stop_irq as the NQ structures are not initialized yet, <snip> [ 3551.726647] BUG: unable to handle kernel NULL pointer dereference at (null) [ 3551.726656] IP: [<ffffffffc0840ee9>] bnxt_qplib_nq_stop_irq+0x59/0xb0 [bnxt_re] [ 3551.726674] PGD 0 [ 3551.726679] Oops: 0002 1 SMP ... [ 3551.726822] Hardware name: Dell Inc. PowerEdge R720/08RW36, BIOS 2.4.3 07/09/2014 [ 3551.726826] task: ffff97e30eec5ee0 ti: ffff97e3173bc000 task.ti: ffff97e3173bc000 [ 3551.726829] RIP: 0010:[<ffffffffc0840ee9>] [<ffffffffc0840ee9>] bnxt_qplib_nq_stop_irq+0x59/0xb0 [bnxt_re] ... [ 3551.726872] Call Trace: [ 3551.726886] [<ffffffffc082cb9e>] bnxt_re_stop_irq+0x4e/0x70 [bnxt_re] [ 3551.726899] [<ffffffffc07d6a53>] bnxt_ulp_irq_stop+0x43/0x70 [bnxt_en] [ 3551.726908] [<ffffffffc07c82f4>] bnxt_reserve_rings+0x174/0x1e0 [bnxt_en] [ 3551.726917] [<ffffffffc07cafd8>] __bnxt_open_nic+0x368/0x9a0 [bnxt_en] [ 3551.726925] [<ffffffffc07cb62b>] bnxt_open_nic+0x1b/0x50 [bnxt_en] [ 3551.726934] [<ffffffffc07cc62f>] bnxt_setup_mq_tc+0x11f/0x260 [bnxt_en] [ 3551.726943] [<ffffffffc07d5f58>] bnxt_dcbnl_ieee_setets+0xb8/0x1f0 [bnxt_en] [ 3551.726954] [<ffffffff890f983a>] dcbnl_ieee_set+0x9a/0x250 [ 3551.726966] [<ffffffff88fd6d21>] ? __alloc_skb+0xa1/0x2d0 [ 3551.726972] [<ffffffff890f72fa>] dcb_doit+0x13a/0x210 [ 3551.726981] [<ffffffff89003ff7>] rtnetlink_rcv_msg+0xa7/0x260 [ 3551.726989] [<ffffffff88ffdb00>] ? rtnl_unicast+0x20/0x30 [ 3551.726996] [<ffffffff88bf9dc8>] ? __kmalloc_node_track_caller+0x58/0x290 [ 3551.727002] [<ffffffff890f7326>] ? dcb_doit+0x166/0x210 [ 3551.727007] [<ffffffff88fd6d0d>] ? __alloc_skb+0x8d/0x2d0 [ 3551.727012] [<ffffffff89003f50>] ? rtnl_newlink+0x880/0x880 ... [ 3551.727104] [<ffffffff8911f7d5>] system_call_fastpath+0x1c/0x21 ... [ 3551.727164] RIP [<ffffffffc0840ee9>] bnxt_qplib_nq_stop_irq+0x59/0xb0 [bnxt_re] [ 3551.727175] RSP <ffff97e3173bf788> [ 3551.727177] CR2: 0000000000000000 Avoid this inconsistent state and system crash by acquiring the rtnl lock for the entire duration of device initialization. Re-factor the code to remove the rtnl lock from the individual function and acquire and release it from the caller. Fixes: 1ac5a4047975 ("RDMA/bnxt_re: Add bnxt_re RoCE driver") Fixes: 6e04b1035689 ("RDMA/bnxt_re: Fix broken RoCE driver due to recent L2 driver changes") Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-09-21 05:33:00 +00:00
static void bnxt_re_free_res(struct bnxt_re_dev *rdev)
{
RDMA/bnxt_re: Fix system crash during RDMA resource initialization bnxt_re_ib_reg acquires and releases the rtnl lock whenever it accesses the L2 driver. The following sequence can trigger a crash Acquires the rtnl_lock -> Registers roce driver callback with L2 driver -> release the rtnl lock bnxt_re acquires the rtnl_lock -> Request for MSIx vectors -> release the rtnl_lock Issue happens when bnxt_re proceeds with remaining part of initialization and L2 driver invokes bnxt_ulp_irq_stop as a part of bnxt_open_nic. The crash is in bnxt_qplib_nq_stop_irq as the NQ structures are not initialized yet, <snip> [ 3551.726647] BUG: unable to handle kernel NULL pointer dereference at (null) [ 3551.726656] IP: [<ffffffffc0840ee9>] bnxt_qplib_nq_stop_irq+0x59/0xb0 [bnxt_re] [ 3551.726674] PGD 0 [ 3551.726679] Oops: 0002 1 SMP ... [ 3551.726822] Hardware name: Dell Inc. PowerEdge R720/08RW36, BIOS 2.4.3 07/09/2014 [ 3551.726826] task: ffff97e30eec5ee0 ti: ffff97e3173bc000 task.ti: ffff97e3173bc000 [ 3551.726829] RIP: 0010:[<ffffffffc0840ee9>] [<ffffffffc0840ee9>] bnxt_qplib_nq_stop_irq+0x59/0xb0 [bnxt_re] ... [ 3551.726872] Call Trace: [ 3551.726886] [<ffffffffc082cb9e>] bnxt_re_stop_irq+0x4e/0x70 [bnxt_re] [ 3551.726899] [<ffffffffc07d6a53>] bnxt_ulp_irq_stop+0x43/0x70 [bnxt_en] [ 3551.726908] [<ffffffffc07c82f4>] bnxt_reserve_rings+0x174/0x1e0 [bnxt_en] [ 3551.726917] [<ffffffffc07cafd8>] __bnxt_open_nic+0x368/0x9a0 [bnxt_en] [ 3551.726925] [<ffffffffc07cb62b>] bnxt_open_nic+0x1b/0x50 [bnxt_en] [ 3551.726934] [<ffffffffc07cc62f>] bnxt_setup_mq_tc+0x11f/0x260 [bnxt_en] [ 3551.726943] [<ffffffffc07d5f58>] bnxt_dcbnl_ieee_setets+0xb8/0x1f0 [bnxt_en] [ 3551.726954] [<ffffffff890f983a>] dcbnl_ieee_set+0x9a/0x250 [ 3551.726966] [<ffffffff88fd6d21>] ? __alloc_skb+0xa1/0x2d0 [ 3551.726972] [<ffffffff890f72fa>] dcb_doit+0x13a/0x210 [ 3551.726981] [<ffffffff89003ff7>] rtnetlink_rcv_msg+0xa7/0x260 [ 3551.726989] [<ffffffff88ffdb00>] ? rtnl_unicast+0x20/0x30 [ 3551.726996] [<ffffffff88bf9dc8>] ? __kmalloc_node_track_caller+0x58/0x290 [ 3551.727002] [<ffffffff890f7326>] ? dcb_doit+0x166/0x210 [ 3551.727007] [<ffffffff88fd6d0d>] ? __alloc_skb+0x8d/0x2d0 [ 3551.727012] [<ffffffff89003f50>] ? rtnl_newlink+0x880/0x880 ... [ 3551.727104] [<ffffffff8911f7d5>] system_call_fastpath+0x1c/0x21 ... [ 3551.727164] RIP [<ffffffffc0840ee9>] bnxt_qplib_nq_stop_irq+0x59/0xb0 [bnxt_re] [ 3551.727175] RSP <ffff97e3173bf788> [ 3551.727177] CR2: 0000000000000000 Avoid this inconsistent state and system crash by acquiring the rtnl lock for the entire duration of device initialization. Re-factor the code to remove the rtnl lock from the individual function and acquire and release it from the caller. Fixes: 1ac5a4047975 ("RDMA/bnxt_re: Add bnxt_re RoCE driver") Fixes: 6e04b1035689 ("RDMA/bnxt_re: Fix broken RoCE driver due to recent L2 driver changes") Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-09-21 05:33:00 +00:00
bnxt_re_free_nq_res(rdev);
if (rdev->qplib_res.dpi_tbl.max) {
bnxt_qplib_dealloc_dpi(&rdev->qplib_res,
&rdev->qplib_res.dpi_tbl,
&rdev->dpi_privileged);
}
if (rdev->qplib_res.rcfw) {
bnxt_qplib_free_res(&rdev->qplib_res);
rdev->qplib_res.rcfw = NULL;
}
}
static int bnxt_re_alloc_res(struct bnxt_re_dev *rdev)
{
int rc = 0, i;
int num_vec_created = 0;
/* Configure and allocate resources for qplib */
rdev->qplib_res.rcfw = &rdev->rcfw;
rc = bnxt_qplib_get_dev_attr(&rdev->rcfw, &rdev->dev_attr,
rdev->is_virtfn);
if (rc)
goto fail;
rc = bnxt_qplib_alloc_res(&rdev->qplib_res, rdev->en_dev->pdev,
rdev->netdev, &rdev->dev_attr);
if (rc)
goto fail;
rc = bnxt_qplib_alloc_dpi(&rdev->qplib_res.dpi_tbl,
&rdev->dpi_privileged,
rdev);
if (rc)
goto dealloc_res;
for (i = 0; i < rdev->num_msix - 1; i++) {
rdev->nq[i].hwq.max_elements = BNXT_RE_MAX_CQ_COUNT +
BNXT_RE_MAX_SRQC_COUNT + 2;
rc = bnxt_qplib_alloc_nq(rdev->en_dev->pdev, &rdev->nq[i]);
if (rc) {
dev_err(rdev_to_dev(rdev), "Alloc Failed NQ%d rc:%#x",
i, rc);
goto free_nq;
}
rc = bnxt_re_net_ring_alloc
(rdev, rdev->nq[i].hwq.pbl[PBL_LVL_0].pg_map_arr,
rdev->nq[i].hwq.pbl[rdev->nq[i].hwq.level].pg_count,
HWRM_RING_ALLOC_CMPL,
BNXT_QPLIB_NQE_MAX_CNT - 1,
rdev->msix_entries[i + 1].ring_idx,
&rdev->nq[i].ring_id);
if (rc) {
dev_err(rdev_to_dev(rdev),
"Failed to allocate NQ fw id with rc = 0x%x",
rc);
bnxt_qplib_free_nq(&rdev->nq[i]);
goto free_nq;
}
num_vec_created++;
}
return 0;
free_nq:
for (i = num_vec_created; i >= 0; i--) {
bnxt_re_net_ring_free(rdev, rdev->nq[i].ring_id);
bnxt_qplib_free_nq(&rdev->nq[i]);
}
bnxt_qplib_dealloc_dpi(&rdev->qplib_res,
&rdev->qplib_res.dpi_tbl,
&rdev->dpi_privileged);
dealloc_res:
bnxt_qplib_free_res(&rdev->qplib_res);
fail:
rdev->qplib_res.rcfw = NULL;
return rc;
}
static void bnxt_re_dispatch_event(struct ib_device *ibdev, struct ib_qp *qp,
u8 port_num, enum ib_event_type event)
{
struct ib_event ib_event;
ib_event.device = ibdev;
if (qp) {
ib_event.element.qp = qp;
ib_event.event = event;
if (qp->event_handler)
qp->event_handler(&ib_event, qp->qp_context);
} else {
ib_event.element.port_num = port_num;
ib_event.event = event;
ib_dispatch_event(&ib_event);
}
}
#define HWRM_QUEUE_PRI2COS_QCFG_INPUT_FLAGS_IVLAN 0x02
static int bnxt_re_query_hwrm_pri2cos(struct bnxt_re_dev *rdev, u8 dir,
u64 *cid_map)
{
struct hwrm_queue_pri2cos_qcfg_input req = {0};
struct bnxt *bp = netdev_priv(rdev->netdev);
struct hwrm_queue_pri2cos_qcfg_output resp;
struct bnxt_en_dev *en_dev = rdev->en_dev;
struct bnxt_fw_msg fw_msg;
u32 flags = 0;
u8 *qcfgmap, *tmp_map;
int rc = 0, i;
if (!cid_map)
return -EINVAL;
memset(&fw_msg, 0, sizeof(fw_msg));
bnxt_re_init_hwrm_hdr(rdev, (void *)&req,
HWRM_QUEUE_PRI2COS_QCFG, -1, -1);
flags |= (dir & 0x01);
flags |= HWRM_QUEUE_PRI2COS_QCFG_INPUT_FLAGS_IVLAN;
req.flags = cpu_to_le32(flags);
req.port_id = bp->pf.port_id;
bnxt_re_fill_fw_msg(&fw_msg, (void *)&req, sizeof(req), (void *)&resp,
sizeof(resp), DFLT_HWRM_CMD_TIMEOUT);
rc = en_dev->en_ops->bnxt_send_fw_msg(en_dev, BNXT_ROCE_ULP, &fw_msg);
if (rc)
return rc;
if (resp.queue_cfg_info) {
dev_warn(rdev_to_dev(rdev),
"Asymmetric cos queue configuration detected");
dev_warn(rdev_to_dev(rdev),
" on device, QoS may not be fully functional\n");
}
qcfgmap = &resp.pri0_cos_queue_id;
tmp_map = (u8 *)cid_map;
for (i = 0; i < IEEE_8021QAZ_MAX_TCS; i++)
tmp_map[i] = qcfgmap[i];
return rc;
}
static bool bnxt_re_is_qp1_or_shadow_qp(struct bnxt_re_dev *rdev,
struct bnxt_re_qp *qp)
{
return (qp->ib_qp.qp_type == IB_QPT_GSI) || (qp == rdev->qp1_sqp);
}
static void bnxt_re_dev_stop(struct bnxt_re_dev *rdev)
{
int mask = IB_QP_STATE;
struct ib_qp_attr qp_attr;
struct bnxt_re_qp *qp;
qp_attr.qp_state = IB_QPS_ERR;
mutex_lock(&rdev->qp_lock);
list_for_each_entry(qp, &rdev->qp_list, list) {
/* Modify the state of all QPs except QP1/Shadow QP */
if (!bnxt_re_is_qp1_or_shadow_qp(rdev, qp)) {
if (qp->qplib_qp.state !=
CMDQ_MODIFY_QP_NEW_STATE_RESET &&
qp->qplib_qp.state !=
CMDQ_MODIFY_QP_NEW_STATE_ERR) {
bnxt_re_dispatch_event(&rdev->ibdev, &qp->ib_qp,
1, IB_EVENT_QP_FATAL);
bnxt_re_modify_qp(&qp->ib_qp, &qp_attr, mask,
NULL);
}
}
}
mutex_unlock(&rdev->qp_lock);
}
static int bnxt_re_update_gid(struct bnxt_re_dev *rdev)
{
struct bnxt_qplib_sgid_tbl *sgid_tbl = &rdev->qplib_res.sgid_tbl;
struct bnxt_qplib_gid gid;
u16 gid_idx, index;
int rc = 0;
if (!test_bit(BNXT_RE_FLAG_IBDEV_REGISTERED, &rdev->flags))
return 0;
if (!sgid_tbl) {
dev_err(rdev_to_dev(rdev), "QPLIB: SGID table not allocated");
return -EINVAL;
}
for (index = 0; index < sgid_tbl->active; index++) {
gid_idx = sgid_tbl->hw_id[index];
if (!memcmp(&sgid_tbl->tbl[index], &bnxt_qplib_gid_zero,
sizeof(bnxt_qplib_gid_zero)))
continue;
/* need to modify the VLAN enable setting of non VLAN GID only
* as setting is done for VLAN GID while adding GID
*/
if (sgid_tbl->vlan[index])
continue;
memcpy(&gid, &sgid_tbl->tbl[index], sizeof(gid));
rc = bnxt_qplib_update_sgid(sgid_tbl, &gid, gid_idx,
rdev->qplib_res.netdev->dev_addr);
}
return rc;
}
static u32 bnxt_re_get_priority_mask(struct bnxt_re_dev *rdev)
{
u32 prio_map = 0, tmp_map = 0;
struct net_device *netdev;
struct dcb_app app;
netdev = rdev->netdev;
memset(&app, 0, sizeof(app));
app.selector = IEEE_8021QAZ_APP_SEL_ETHERTYPE;
app.protocol = ETH_P_IBOE;
tmp_map = dcb_ieee_getapp_mask(netdev, &app);
prio_map = tmp_map;
app.selector = IEEE_8021QAZ_APP_SEL_DGRAM;
app.protocol = ROCE_V2_UDP_DPORT;
tmp_map = dcb_ieee_getapp_mask(netdev, &app);
prio_map |= tmp_map;
return prio_map;
}
static void bnxt_re_parse_cid_map(u8 prio_map, u8 *cid_map, u16 *cosq)
{
u16 prio;
u8 id;
for (prio = 0, id = 0; prio < 8; prio++) {
if (prio_map & (1 << prio)) {
cosq[id] = cid_map[prio];
id++;
if (id == 2) /* Max 2 tcs supported */
break;
}
}
}
static int bnxt_re_setup_qos(struct bnxt_re_dev *rdev)
{
u8 prio_map = 0;
u64 cid_map;
int rc;
/* Get priority for roce */
prio_map = bnxt_re_get_priority_mask(rdev);
if (prio_map == rdev->cur_prio_map)
return 0;
rdev->cur_prio_map = prio_map;
/* Get cosq id for this priority */
rc = bnxt_re_query_hwrm_pri2cos(rdev, 0, &cid_map);
if (rc) {
dev_warn(rdev_to_dev(rdev), "no cos for p_mask %x\n", prio_map);
return rc;
}
/* Parse CoS IDs for app priority */
bnxt_re_parse_cid_map(prio_map, (u8 *)&cid_map, rdev->cosq);
/* Config BONO. */
rc = bnxt_qplib_map_tc2cos(&rdev->qplib_res, rdev->cosq);
if (rc) {
dev_warn(rdev_to_dev(rdev), "no tc for cos{%x, %x}\n",
rdev->cosq[0], rdev->cosq[1]);
return rc;
}
/* Actual priorities are not programmed as they are already
* done by L2 driver; just enable or disable priority vlan tagging
*/
if ((prio_map == 0 && rdev->qplib_res.prio) ||
(prio_map != 0 && !rdev->qplib_res.prio)) {
rdev->qplib_res.prio = prio_map ? true : false;
bnxt_re_update_gid(rdev);
}
return 0;
}
RDMA/bnxt_re: Fix system crash during RDMA resource initialization bnxt_re_ib_reg acquires and releases the rtnl lock whenever it accesses the L2 driver. The following sequence can trigger a crash Acquires the rtnl_lock -> Registers roce driver callback with L2 driver -> release the rtnl lock bnxt_re acquires the rtnl_lock -> Request for MSIx vectors -> release the rtnl_lock Issue happens when bnxt_re proceeds with remaining part of initialization and L2 driver invokes bnxt_ulp_irq_stop as a part of bnxt_open_nic. The crash is in bnxt_qplib_nq_stop_irq as the NQ structures are not initialized yet, <snip> [ 3551.726647] BUG: unable to handle kernel NULL pointer dereference at (null) [ 3551.726656] IP: [<ffffffffc0840ee9>] bnxt_qplib_nq_stop_irq+0x59/0xb0 [bnxt_re] [ 3551.726674] PGD 0 [ 3551.726679] Oops: 0002 1 SMP ... [ 3551.726822] Hardware name: Dell Inc. PowerEdge R720/08RW36, BIOS 2.4.3 07/09/2014 [ 3551.726826] task: ffff97e30eec5ee0 ti: ffff97e3173bc000 task.ti: ffff97e3173bc000 [ 3551.726829] RIP: 0010:[<ffffffffc0840ee9>] [<ffffffffc0840ee9>] bnxt_qplib_nq_stop_irq+0x59/0xb0 [bnxt_re] ... [ 3551.726872] Call Trace: [ 3551.726886] [<ffffffffc082cb9e>] bnxt_re_stop_irq+0x4e/0x70 [bnxt_re] [ 3551.726899] [<ffffffffc07d6a53>] bnxt_ulp_irq_stop+0x43/0x70 [bnxt_en] [ 3551.726908] [<ffffffffc07c82f4>] bnxt_reserve_rings+0x174/0x1e0 [bnxt_en] [ 3551.726917] [<ffffffffc07cafd8>] __bnxt_open_nic+0x368/0x9a0 [bnxt_en] [ 3551.726925] [<ffffffffc07cb62b>] bnxt_open_nic+0x1b/0x50 [bnxt_en] [ 3551.726934] [<ffffffffc07cc62f>] bnxt_setup_mq_tc+0x11f/0x260 [bnxt_en] [ 3551.726943] [<ffffffffc07d5f58>] bnxt_dcbnl_ieee_setets+0xb8/0x1f0 [bnxt_en] [ 3551.726954] [<ffffffff890f983a>] dcbnl_ieee_set+0x9a/0x250 [ 3551.726966] [<ffffffff88fd6d21>] ? __alloc_skb+0xa1/0x2d0 [ 3551.726972] [<ffffffff890f72fa>] dcb_doit+0x13a/0x210 [ 3551.726981] [<ffffffff89003ff7>] rtnetlink_rcv_msg+0xa7/0x260 [ 3551.726989] [<ffffffff88ffdb00>] ? rtnl_unicast+0x20/0x30 [ 3551.726996] [<ffffffff88bf9dc8>] ? __kmalloc_node_track_caller+0x58/0x290 [ 3551.727002] [<ffffffff890f7326>] ? dcb_doit+0x166/0x210 [ 3551.727007] [<ffffffff88fd6d0d>] ? __alloc_skb+0x8d/0x2d0 [ 3551.727012] [<ffffffff89003f50>] ? rtnl_newlink+0x880/0x880 ... [ 3551.727104] [<ffffffff8911f7d5>] system_call_fastpath+0x1c/0x21 ... [ 3551.727164] RIP [<ffffffffc0840ee9>] bnxt_qplib_nq_stop_irq+0x59/0xb0 [bnxt_re] [ 3551.727175] RSP <ffff97e3173bf788> [ 3551.727177] CR2: 0000000000000000 Avoid this inconsistent state and system crash by acquiring the rtnl lock for the entire duration of device initialization. Re-factor the code to remove the rtnl lock from the individual function and acquire and release it from the caller. Fixes: 1ac5a4047975 ("RDMA/bnxt_re: Add bnxt_re RoCE driver") Fixes: 6e04b1035689 ("RDMA/bnxt_re: Fix broken RoCE driver due to recent L2 driver changes") Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-09-21 05:33:00 +00:00
static void bnxt_re_ib_unreg(struct bnxt_re_dev *rdev)
{
int rc;
if (test_and_clear_bit(BNXT_RE_FLAG_IBDEV_REGISTERED, &rdev->flags)) {
/* Cleanup ib dev */
bnxt_re_unregister_ib(rdev);
}
if (test_and_clear_bit(BNXT_RE_FLAG_QOS_WORK_REG, &rdev->flags))
cancel_delayed_work_sync(&rdev->worker);
if (test_and_clear_bit(BNXT_RE_FLAG_RESOURCES_INITIALIZED,
&rdev->flags))
bnxt_re_cleanup_res(rdev);
if (test_and_clear_bit(BNXT_RE_FLAG_RESOURCES_ALLOCATED, &rdev->flags))
bnxt_re_free_res(rdev);
if (test_and_clear_bit(BNXT_RE_FLAG_RCFW_CHANNEL_EN, &rdev->flags)) {
rc = bnxt_qplib_deinit_rcfw(&rdev->rcfw);
if (rc)
dev_warn(rdev_to_dev(rdev),
"Failed to deinitialize RCFW: %#x", rc);
RDMA/bnxt_re: Fix system crash during RDMA resource initialization bnxt_re_ib_reg acquires and releases the rtnl lock whenever it accesses the L2 driver. The following sequence can trigger a crash Acquires the rtnl_lock -> Registers roce driver callback with L2 driver -> release the rtnl lock bnxt_re acquires the rtnl_lock -> Request for MSIx vectors -> release the rtnl_lock Issue happens when bnxt_re proceeds with remaining part of initialization and L2 driver invokes bnxt_ulp_irq_stop as a part of bnxt_open_nic. The crash is in bnxt_qplib_nq_stop_irq as the NQ structures are not initialized yet, <snip> [ 3551.726647] BUG: unable to handle kernel NULL pointer dereference at (null) [ 3551.726656] IP: [<ffffffffc0840ee9>] bnxt_qplib_nq_stop_irq+0x59/0xb0 [bnxt_re] [ 3551.726674] PGD 0 [ 3551.726679] Oops: 0002 1 SMP ... [ 3551.726822] Hardware name: Dell Inc. PowerEdge R720/08RW36, BIOS 2.4.3 07/09/2014 [ 3551.726826] task: ffff97e30eec5ee0 ti: ffff97e3173bc000 task.ti: ffff97e3173bc000 [ 3551.726829] RIP: 0010:[<ffffffffc0840ee9>] [<ffffffffc0840ee9>] bnxt_qplib_nq_stop_irq+0x59/0xb0 [bnxt_re] ... [ 3551.726872] Call Trace: [ 3551.726886] [<ffffffffc082cb9e>] bnxt_re_stop_irq+0x4e/0x70 [bnxt_re] [ 3551.726899] [<ffffffffc07d6a53>] bnxt_ulp_irq_stop+0x43/0x70 [bnxt_en] [ 3551.726908] [<ffffffffc07c82f4>] bnxt_reserve_rings+0x174/0x1e0 [bnxt_en] [ 3551.726917] [<ffffffffc07cafd8>] __bnxt_open_nic+0x368/0x9a0 [bnxt_en] [ 3551.726925] [<ffffffffc07cb62b>] bnxt_open_nic+0x1b/0x50 [bnxt_en] [ 3551.726934] [<ffffffffc07cc62f>] bnxt_setup_mq_tc+0x11f/0x260 [bnxt_en] [ 3551.726943] [<ffffffffc07d5f58>] bnxt_dcbnl_ieee_setets+0xb8/0x1f0 [bnxt_en] [ 3551.726954] [<ffffffff890f983a>] dcbnl_ieee_set+0x9a/0x250 [ 3551.726966] [<ffffffff88fd6d21>] ? __alloc_skb+0xa1/0x2d0 [ 3551.726972] [<ffffffff890f72fa>] dcb_doit+0x13a/0x210 [ 3551.726981] [<ffffffff89003ff7>] rtnetlink_rcv_msg+0xa7/0x260 [ 3551.726989] [<ffffffff88ffdb00>] ? rtnl_unicast+0x20/0x30 [ 3551.726996] [<ffffffff88bf9dc8>] ? __kmalloc_node_track_caller+0x58/0x290 [ 3551.727002] [<ffffffff890f7326>] ? dcb_doit+0x166/0x210 [ 3551.727007] [<ffffffff88fd6d0d>] ? __alloc_skb+0x8d/0x2d0 [ 3551.727012] [<ffffffff89003f50>] ? rtnl_newlink+0x880/0x880 ... [ 3551.727104] [<ffffffff8911f7d5>] system_call_fastpath+0x1c/0x21 ... [ 3551.727164] RIP [<ffffffffc0840ee9>] bnxt_qplib_nq_stop_irq+0x59/0xb0 [bnxt_re] [ 3551.727175] RSP <ffff97e3173bf788> [ 3551.727177] CR2: 0000000000000000 Avoid this inconsistent state and system crash by acquiring the rtnl lock for the entire duration of device initialization. Re-factor the code to remove the rtnl lock from the individual function and acquire and release it from the caller. Fixes: 1ac5a4047975 ("RDMA/bnxt_re: Add bnxt_re RoCE driver") Fixes: 6e04b1035689 ("RDMA/bnxt_re: Fix broken RoCE driver due to recent L2 driver changes") Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-09-21 05:33:00 +00:00
bnxt_re_net_stats_ctx_free(rdev, rdev->qplib_ctx.stats.fw_id);
bnxt_qplib_free_ctx(rdev->en_dev->pdev, &rdev->qplib_ctx);
bnxt_qplib_disable_rcfw_channel(&rdev->rcfw);
RDMA/bnxt_re: Fix system crash during RDMA resource initialization bnxt_re_ib_reg acquires and releases the rtnl lock whenever it accesses the L2 driver. The following sequence can trigger a crash Acquires the rtnl_lock -> Registers roce driver callback with L2 driver -> release the rtnl lock bnxt_re acquires the rtnl_lock -> Request for MSIx vectors -> release the rtnl_lock Issue happens when bnxt_re proceeds with remaining part of initialization and L2 driver invokes bnxt_ulp_irq_stop as a part of bnxt_open_nic. The crash is in bnxt_qplib_nq_stop_irq as the NQ structures are not initialized yet, <snip> [ 3551.726647] BUG: unable to handle kernel NULL pointer dereference at (null) [ 3551.726656] IP: [<ffffffffc0840ee9>] bnxt_qplib_nq_stop_irq+0x59/0xb0 [bnxt_re] [ 3551.726674] PGD 0 [ 3551.726679] Oops: 0002 1 SMP ... [ 3551.726822] Hardware name: Dell Inc. PowerEdge R720/08RW36, BIOS 2.4.3 07/09/2014 [ 3551.726826] task: ffff97e30eec5ee0 ti: ffff97e3173bc000 task.ti: ffff97e3173bc000 [ 3551.726829] RIP: 0010:[<ffffffffc0840ee9>] [<ffffffffc0840ee9>] bnxt_qplib_nq_stop_irq+0x59/0xb0 [bnxt_re] ... [ 3551.726872] Call Trace: [ 3551.726886] [<ffffffffc082cb9e>] bnxt_re_stop_irq+0x4e/0x70 [bnxt_re] [ 3551.726899] [<ffffffffc07d6a53>] bnxt_ulp_irq_stop+0x43/0x70 [bnxt_en] [ 3551.726908] [<ffffffffc07c82f4>] bnxt_reserve_rings+0x174/0x1e0 [bnxt_en] [ 3551.726917] [<ffffffffc07cafd8>] __bnxt_open_nic+0x368/0x9a0 [bnxt_en] [ 3551.726925] [<ffffffffc07cb62b>] bnxt_open_nic+0x1b/0x50 [bnxt_en] [ 3551.726934] [<ffffffffc07cc62f>] bnxt_setup_mq_tc+0x11f/0x260 [bnxt_en] [ 3551.726943] [<ffffffffc07d5f58>] bnxt_dcbnl_ieee_setets+0xb8/0x1f0 [bnxt_en] [ 3551.726954] [<ffffffff890f983a>] dcbnl_ieee_set+0x9a/0x250 [ 3551.726966] [<ffffffff88fd6d21>] ? __alloc_skb+0xa1/0x2d0 [ 3551.726972] [<ffffffff890f72fa>] dcb_doit+0x13a/0x210 [ 3551.726981] [<ffffffff89003ff7>] rtnetlink_rcv_msg+0xa7/0x260 [ 3551.726989] [<ffffffff88ffdb00>] ? rtnl_unicast+0x20/0x30 [ 3551.726996] [<ffffffff88bf9dc8>] ? __kmalloc_node_track_caller+0x58/0x290 [ 3551.727002] [<ffffffff890f7326>] ? dcb_doit+0x166/0x210 [ 3551.727007] [<ffffffff88fd6d0d>] ? __alloc_skb+0x8d/0x2d0 [ 3551.727012] [<ffffffff89003f50>] ? rtnl_newlink+0x880/0x880 ... [ 3551.727104] [<ffffffff8911f7d5>] system_call_fastpath+0x1c/0x21 ... [ 3551.727164] RIP [<ffffffffc0840ee9>] bnxt_qplib_nq_stop_irq+0x59/0xb0 [bnxt_re] [ 3551.727175] RSP <ffff97e3173bf788> [ 3551.727177] CR2: 0000000000000000 Avoid this inconsistent state and system crash by acquiring the rtnl lock for the entire duration of device initialization. Re-factor the code to remove the rtnl lock from the individual function and acquire and release it from the caller. Fixes: 1ac5a4047975 ("RDMA/bnxt_re: Add bnxt_re RoCE driver") Fixes: 6e04b1035689 ("RDMA/bnxt_re: Fix broken RoCE driver due to recent L2 driver changes") Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-09-21 05:33:00 +00:00
bnxt_re_net_ring_free(rdev, rdev->rcfw.creq_ring_id);
bnxt_qplib_free_rcfw_channel(&rdev->rcfw);
}
if (test_and_clear_bit(BNXT_RE_FLAG_GOT_MSIX, &rdev->flags)) {
RDMA/bnxt_re: Fix system crash during RDMA resource initialization bnxt_re_ib_reg acquires and releases the rtnl lock whenever it accesses the L2 driver. The following sequence can trigger a crash Acquires the rtnl_lock -> Registers roce driver callback with L2 driver -> release the rtnl lock bnxt_re acquires the rtnl_lock -> Request for MSIx vectors -> release the rtnl_lock Issue happens when bnxt_re proceeds with remaining part of initialization and L2 driver invokes bnxt_ulp_irq_stop as a part of bnxt_open_nic. The crash is in bnxt_qplib_nq_stop_irq as the NQ structures are not initialized yet, <snip> [ 3551.726647] BUG: unable to handle kernel NULL pointer dereference at (null) [ 3551.726656] IP: [<ffffffffc0840ee9>] bnxt_qplib_nq_stop_irq+0x59/0xb0 [bnxt_re] [ 3551.726674] PGD 0 [ 3551.726679] Oops: 0002 1 SMP ... [ 3551.726822] Hardware name: Dell Inc. PowerEdge R720/08RW36, BIOS 2.4.3 07/09/2014 [ 3551.726826] task: ffff97e30eec5ee0 ti: ffff97e3173bc000 task.ti: ffff97e3173bc000 [ 3551.726829] RIP: 0010:[<ffffffffc0840ee9>] [<ffffffffc0840ee9>] bnxt_qplib_nq_stop_irq+0x59/0xb0 [bnxt_re] ... [ 3551.726872] Call Trace: [ 3551.726886] [<ffffffffc082cb9e>] bnxt_re_stop_irq+0x4e/0x70 [bnxt_re] [ 3551.726899] [<ffffffffc07d6a53>] bnxt_ulp_irq_stop+0x43/0x70 [bnxt_en] [ 3551.726908] [<ffffffffc07c82f4>] bnxt_reserve_rings+0x174/0x1e0 [bnxt_en] [ 3551.726917] [<ffffffffc07cafd8>] __bnxt_open_nic+0x368/0x9a0 [bnxt_en] [ 3551.726925] [<ffffffffc07cb62b>] bnxt_open_nic+0x1b/0x50 [bnxt_en] [ 3551.726934] [<ffffffffc07cc62f>] bnxt_setup_mq_tc+0x11f/0x260 [bnxt_en] [ 3551.726943] [<ffffffffc07d5f58>] bnxt_dcbnl_ieee_setets+0xb8/0x1f0 [bnxt_en] [ 3551.726954] [<ffffffff890f983a>] dcbnl_ieee_set+0x9a/0x250 [ 3551.726966] [<ffffffff88fd6d21>] ? __alloc_skb+0xa1/0x2d0 [ 3551.726972] [<ffffffff890f72fa>] dcb_doit+0x13a/0x210 [ 3551.726981] [<ffffffff89003ff7>] rtnetlink_rcv_msg+0xa7/0x260 [ 3551.726989] [<ffffffff88ffdb00>] ? rtnl_unicast+0x20/0x30 [ 3551.726996] [<ffffffff88bf9dc8>] ? __kmalloc_node_track_caller+0x58/0x290 [ 3551.727002] [<ffffffff890f7326>] ? dcb_doit+0x166/0x210 [ 3551.727007] [<ffffffff88fd6d0d>] ? __alloc_skb+0x8d/0x2d0 [ 3551.727012] [<ffffffff89003f50>] ? rtnl_newlink+0x880/0x880 ... [ 3551.727104] [<ffffffff8911f7d5>] system_call_fastpath+0x1c/0x21 ... [ 3551.727164] RIP [<ffffffffc0840ee9>] bnxt_qplib_nq_stop_irq+0x59/0xb0 [bnxt_re] [ 3551.727175] RSP <ffff97e3173bf788> [ 3551.727177] CR2: 0000000000000000 Avoid this inconsistent state and system crash by acquiring the rtnl lock for the entire duration of device initialization. Re-factor the code to remove the rtnl lock from the individual function and acquire and release it from the caller. Fixes: 1ac5a4047975 ("RDMA/bnxt_re: Add bnxt_re RoCE driver") Fixes: 6e04b1035689 ("RDMA/bnxt_re: Fix broken RoCE driver due to recent L2 driver changes") Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-09-21 05:33:00 +00:00
rc = bnxt_re_free_msix(rdev);
if (rc)
dev_warn(rdev_to_dev(rdev),
"Failed to free MSI-X vectors: %#x", rc);
}
if (test_and_clear_bit(BNXT_RE_FLAG_NETDEV_REGISTERED, &rdev->flags)) {
RDMA/bnxt_re: Fix system crash during RDMA resource initialization bnxt_re_ib_reg acquires and releases the rtnl lock whenever it accesses the L2 driver. The following sequence can trigger a crash Acquires the rtnl_lock -> Registers roce driver callback with L2 driver -> release the rtnl lock bnxt_re acquires the rtnl_lock -> Request for MSIx vectors -> release the rtnl_lock Issue happens when bnxt_re proceeds with remaining part of initialization and L2 driver invokes bnxt_ulp_irq_stop as a part of bnxt_open_nic. The crash is in bnxt_qplib_nq_stop_irq as the NQ structures are not initialized yet, <snip> [ 3551.726647] BUG: unable to handle kernel NULL pointer dereference at (null) [ 3551.726656] IP: [<ffffffffc0840ee9>] bnxt_qplib_nq_stop_irq+0x59/0xb0 [bnxt_re] [ 3551.726674] PGD 0 [ 3551.726679] Oops: 0002 1 SMP ... [ 3551.726822] Hardware name: Dell Inc. PowerEdge R720/08RW36, BIOS 2.4.3 07/09/2014 [ 3551.726826] task: ffff97e30eec5ee0 ti: ffff97e3173bc000 task.ti: ffff97e3173bc000 [ 3551.726829] RIP: 0010:[<ffffffffc0840ee9>] [<ffffffffc0840ee9>] bnxt_qplib_nq_stop_irq+0x59/0xb0 [bnxt_re] ... [ 3551.726872] Call Trace: [ 3551.726886] [<ffffffffc082cb9e>] bnxt_re_stop_irq+0x4e/0x70 [bnxt_re] [ 3551.726899] [<ffffffffc07d6a53>] bnxt_ulp_irq_stop+0x43/0x70 [bnxt_en] [ 3551.726908] [<ffffffffc07c82f4>] bnxt_reserve_rings+0x174/0x1e0 [bnxt_en] [ 3551.726917] [<ffffffffc07cafd8>] __bnxt_open_nic+0x368/0x9a0 [bnxt_en] [ 3551.726925] [<ffffffffc07cb62b>] bnxt_open_nic+0x1b/0x50 [bnxt_en] [ 3551.726934] [<ffffffffc07cc62f>] bnxt_setup_mq_tc+0x11f/0x260 [bnxt_en] [ 3551.726943] [<ffffffffc07d5f58>] bnxt_dcbnl_ieee_setets+0xb8/0x1f0 [bnxt_en] [ 3551.726954] [<ffffffff890f983a>] dcbnl_ieee_set+0x9a/0x250 [ 3551.726966] [<ffffffff88fd6d21>] ? __alloc_skb+0xa1/0x2d0 [ 3551.726972] [<ffffffff890f72fa>] dcb_doit+0x13a/0x210 [ 3551.726981] [<ffffffff89003ff7>] rtnetlink_rcv_msg+0xa7/0x260 [ 3551.726989] [<ffffffff88ffdb00>] ? rtnl_unicast+0x20/0x30 [ 3551.726996] [<ffffffff88bf9dc8>] ? __kmalloc_node_track_caller+0x58/0x290 [ 3551.727002] [<ffffffff890f7326>] ? dcb_doit+0x166/0x210 [ 3551.727007] [<ffffffff88fd6d0d>] ? __alloc_skb+0x8d/0x2d0 [ 3551.727012] [<ffffffff89003f50>] ? rtnl_newlink+0x880/0x880 ... [ 3551.727104] [<ffffffff8911f7d5>] system_call_fastpath+0x1c/0x21 ... [ 3551.727164] RIP [<ffffffffc0840ee9>] bnxt_qplib_nq_stop_irq+0x59/0xb0 [bnxt_re] [ 3551.727175] RSP <ffff97e3173bf788> [ 3551.727177] CR2: 0000000000000000 Avoid this inconsistent state and system crash by acquiring the rtnl lock for the entire duration of device initialization. Re-factor the code to remove the rtnl lock from the individual function and acquire and release it from the caller. Fixes: 1ac5a4047975 ("RDMA/bnxt_re: Add bnxt_re RoCE driver") Fixes: 6e04b1035689 ("RDMA/bnxt_re: Fix broken RoCE driver due to recent L2 driver changes") Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-09-21 05:33:00 +00:00
rc = bnxt_re_unregister_netdev(rdev);
if (rc)
dev_warn(rdev_to_dev(rdev),
"Failed to unregister with netdev: %#x", rc);
}
}
/* worker thread for polling periodic events. Now used for QoS programming*/
static void bnxt_re_worker(struct work_struct *work)
{
struct bnxt_re_dev *rdev = container_of(work, struct bnxt_re_dev,
worker.work);
bnxt_re_setup_qos(rdev);
schedule_delayed_work(&rdev->worker, msecs_to_jiffies(30000));
}
static int bnxt_re_ib_reg(struct bnxt_re_dev *rdev)
{
int rc;
RDMA/bnxt_re: Fix system crash during RDMA resource initialization bnxt_re_ib_reg acquires and releases the rtnl lock whenever it accesses the L2 driver. The following sequence can trigger a crash Acquires the rtnl_lock -> Registers roce driver callback with L2 driver -> release the rtnl lock bnxt_re acquires the rtnl_lock -> Request for MSIx vectors -> release the rtnl_lock Issue happens when bnxt_re proceeds with remaining part of initialization and L2 driver invokes bnxt_ulp_irq_stop as a part of bnxt_open_nic. The crash is in bnxt_qplib_nq_stop_irq as the NQ structures are not initialized yet, <snip> [ 3551.726647] BUG: unable to handle kernel NULL pointer dereference at (null) [ 3551.726656] IP: [<ffffffffc0840ee9>] bnxt_qplib_nq_stop_irq+0x59/0xb0 [bnxt_re] [ 3551.726674] PGD 0 [ 3551.726679] Oops: 0002 1 SMP ... [ 3551.726822] Hardware name: Dell Inc. PowerEdge R720/08RW36, BIOS 2.4.3 07/09/2014 [ 3551.726826] task: ffff97e30eec5ee0 ti: ffff97e3173bc000 task.ti: ffff97e3173bc000 [ 3551.726829] RIP: 0010:[<ffffffffc0840ee9>] [<ffffffffc0840ee9>] bnxt_qplib_nq_stop_irq+0x59/0xb0 [bnxt_re] ... [ 3551.726872] Call Trace: [ 3551.726886] [<ffffffffc082cb9e>] bnxt_re_stop_irq+0x4e/0x70 [bnxt_re] [ 3551.726899] [<ffffffffc07d6a53>] bnxt_ulp_irq_stop+0x43/0x70 [bnxt_en] [ 3551.726908] [<ffffffffc07c82f4>] bnxt_reserve_rings+0x174/0x1e0 [bnxt_en] [ 3551.726917] [<ffffffffc07cafd8>] __bnxt_open_nic+0x368/0x9a0 [bnxt_en] [ 3551.726925] [<ffffffffc07cb62b>] bnxt_open_nic+0x1b/0x50 [bnxt_en] [ 3551.726934] [<ffffffffc07cc62f>] bnxt_setup_mq_tc+0x11f/0x260 [bnxt_en] [ 3551.726943] [<ffffffffc07d5f58>] bnxt_dcbnl_ieee_setets+0xb8/0x1f0 [bnxt_en] [ 3551.726954] [<ffffffff890f983a>] dcbnl_ieee_set+0x9a/0x250 [ 3551.726966] [<ffffffff88fd6d21>] ? __alloc_skb+0xa1/0x2d0 [ 3551.726972] [<ffffffff890f72fa>] dcb_doit+0x13a/0x210 [ 3551.726981] [<ffffffff89003ff7>] rtnetlink_rcv_msg+0xa7/0x260 [ 3551.726989] [<ffffffff88ffdb00>] ? rtnl_unicast+0x20/0x30 [ 3551.726996] [<ffffffff88bf9dc8>] ? __kmalloc_node_track_caller+0x58/0x290 [ 3551.727002] [<ffffffff890f7326>] ? dcb_doit+0x166/0x210 [ 3551.727007] [<ffffffff88fd6d0d>] ? __alloc_skb+0x8d/0x2d0 [ 3551.727012] [<ffffffff89003f50>] ? rtnl_newlink+0x880/0x880 ... [ 3551.727104] [<ffffffff8911f7d5>] system_call_fastpath+0x1c/0x21 ... [ 3551.727164] RIP [<ffffffffc0840ee9>] bnxt_qplib_nq_stop_irq+0x59/0xb0 [bnxt_re] [ 3551.727175] RSP <ffff97e3173bf788> [ 3551.727177] CR2: 0000000000000000 Avoid this inconsistent state and system crash by acquiring the rtnl lock for the entire duration of device initialization. Re-factor the code to remove the rtnl lock from the individual function and acquire and release it from the caller. Fixes: 1ac5a4047975 ("RDMA/bnxt_re: Add bnxt_re RoCE driver") Fixes: 6e04b1035689 ("RDMA/bnxt_re: Fix broken RoCE driver due to recent L2 driver changes") Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-09-21 05:33:00 +00:00
bool locked;
/* Acquire rtnl lock through out this function */
rtnl_lock();
locked = true;
/* Registered a new RoCE device instance to netdev */
rc = bnxt_re_register_netdev(rdev);
if (rc) {
pr_err("Failed to register with netedev: %#x\n", rc);
return -EINVAL;
}
set_bit(BNXT_RE_FLAG_NETDEV_REGISTERED, &rdev->flags);
/* Check whether VF or PF */
bnxt_re_get_sriov_func_type(rdev);
rc = bnxt_re_request_msix(rdev);
if (rc) {
pr_err("Failed to get MSI-X vectors: %#x\n", rc);
rc = -EINVAL;
goto fail;
}
set_bit(BNXT_RE_FLAG_GOT_MSIX, &rdev->flags);
/* Establish RCFW Communication Channel to initialize the context
* memory for the function and all child VFs
*/
rc = bnxt_qplib_alloc_rcfw_channel(rdev->en_dev->pdev, &rdev->rcfw,
BNXT_RE_MAX_QPC_COUNT);
if (rc) {
pr_err("Failed to allocate RCFW Channel: %#x\n", rc);
goto fail;
}
rc = bnxt_re_net_ring_alloc
(rdev, rdev->rcfw.creq.pbl[PBL_LVL_0].pg_map_arr,
rdev->rcfw.creq.pbl[rdev->rcfw.creq.level].pg_count,
HWRM_RING_ALLOC_CMPL, BNXT_QPLIB_CREQE_MAX_CNT - 1,
rdev->msix_entries[BNXT_RE_AEQ_IDX].ring_idx,
&rdev->rcfw.creq_ring_id);
if (rc) {
pr_err("Failed to allocate CREQ: %#x\n", rc);
goto free_rcfw;
}
rc = bnxt_qplib_enable_rcfw_channel
(rdev->en_dev->pdev, &rdev->rcfw,
rdev->msix_entries[BNXT_RE_AEQ_IDX].vector,
rdev->msix_entries[BNXT_RE_AEQ_IDX].db_offset,
rdev->is_virtfn, &bnxt_re_aeq_handler);
if (rc) {
pr_err("Failed to enable RCFW channel: %#x\n", rc);
goto free_ring;
}
rc = bnxt_qplib_get_dev_attr(&rdev->rcfw, &rdev->dev_attr,
rdev->is_virtfn);
if (rc)
goto disable_rcfw;
if (!rdev->is_virtfn)
bnxt_re_set_resource_limits(rdev);
rc = bnxt_qplib_alloc_ctx(rdev->en_dev->pdev, &rdev->qplib_ctx, 0);
if (rc) {
pr_err("Failed to allocate QPLIB context: %#x\n", rc);
goto disable_rcfw;
}
rc = bnxt_re_net_stats_ctx_alloc(rdev,
rdev->qplib_ctx.stats.dma_map,
&rdev->qplib_ctx.stats.fw_id);
if (rc) {
pr_err("Failed to allocate stats context: %#x\n", rc);
goto free_ctx;
}
rc = bnxt_qplib_init_rcfw(&rdev->rcfw, &rdev->qplib_ctx,
rdev->is_virtfn);
if (rc) {
pr_err("Failed to initialize RCFW: %#x\n", rc);
goto free_sctx;
}
set_bit(BNXT_RE_FLAG_RCFW_CHANNEL_EN, &rdev->flags);
/* Resources based on the 'new' device caps */
rc = bnxt_re_alloc_res(rdev);
if (rc) {
pr_err("Failed to allocate resources: %#x\n", rc);
goto fail;
}
set_bit(BNXT_RE_FLAG_RESOURCES_ALLOCATED, &rdev->flags);
rc = bnxt_re_init_res(rdev);
if (rc) {
pr_err("Failed to initialize resources: %#x\n", rc);
goto fail;
}
set_bit(BNXT_RE_FLAG_RESOURCES_INITIALIZED, &rdev->flags);
if (!rdev->is_virtfn) {
rc = bnxt_re_setup_qos(rdev);
if (rc)
pr_info("RoCE priority not yet configured\n");
INIT_DELAYED_WORK(&rdev->worker, bnxt_re_worker);
set_bit(BNXT_RE_FLAG_QOS_WORK_REG, &rdev->flags);
schedule_delayed_work(&rdev->worker, msecs_to_jiffies(30000));
}
RDMA/bnxt_re: Fix system crash during RDMA resource initialization bnxt_re_ib_reg acquires and releases the rtnl lock whenever it accesses the L2 driver. The following sequence can trigger a crash Acquires the rtnl_lock -> Registers roce driver callback with L2 driver -> release the rtnl lock bnxt_re acquires the rtnl_lock -> Request for MSIx vectors -> release the rtnl_lock Issue happens when bnxt_re proceeds with remaining part of initialization and L2 driver invokes bnxt_ulp_irq_stop as a part of bnxt_open_nic. The crash is in bnxt_qplib_nq_stop_irq as the NQ structures are not initialized yet, <snip> [ 3551.726647] BUG: unable to handle kernel NULL pointer dereference at (null) [ 3551.726656] IP: [<ffffffffc0840ee9>] bnxt_qplib_nq_stop_irq+0x59/0xb0 [bnxt_re] [ 3551.726674] PGD 0 [ 3551.726679] Oops: 0002 1 SMP ... [ 3551.726822] Hardware name: Dell Inc. PowerEdge R720/08RW36, BIOS 2.4.3 07/09/2014 [ 3551.726826] task: ffff97e30eec5ee0 ti: ffff97e3173bc000 task.ti: ffff97e3173bc000 [ 3551.726829] RIP: 0010:[<ffffffffc0840ee9>] [<ffffffffc0840ee9>] bnxt_qplib_nq_stop_irq+0x59/0xb0 [bnxt_re] ... [ 3551.726872] Call Trace: [ 3551.726886] [<ffffffffc082cb9e>] bnxt_re_stop_irq+0x4e/0x70 [bnxt_re] [ 3551.726899] [<ffffffffc07d6a53>] bnxt_ulp_irq_stop+0x43/0x70 [bnxt_en] [ 3551.726908] [<ffffffffc07c82f4>] bnxt_reserve_rings+0x174/0x1e0 [bnxt_en] [ 3551.726917] [<ffffffffc07cafd8>] __bnxt_open_nic+0x368/0x9a0 [bnxt_en] [ 3551.726925] [<ffffffffc07cb62b>] bnxt_open_nic+0x1b/0x50 [bnxt_en] [ 3551.726934] [<ffffffffc07cc62f>] bnxt_setup_mq_tc+0x11f/0x260 [bnxt_en] [ 3551.726943] [<ffffffffc07d5f58>] bnxt_dcbnl_ieee_setets+0xb8/0x1f0 [bnxt_en] [ 3551.726954] [<ffffffff890f983a>] dcbnl_ieee_set+0x9a/0x250 [ 3551.726966] [<ffffffff88fd6d21>] ? __alloc_skb+0xa1/0x2d0 [ 3551.726972] [<ffffffff890f72fa>] dcb_doit+0x13a/0x210 [ 3551.726981] [<ffffffff89003ff7>] rtnetlink_rcv_msg+0xa7/0x260 [ 3551.726989] [<ffffffff88ffdb00>] ? rtnl_unicast+0x20/0x30 [ 3551.726996] [<ffffffff88bf9dc8>] ? __kmalloc_node_track_caller+0x58/0x290 [ 3551.727002] [<ffffffff890f7326>] ? dcb_doit+0x166/0x210 [ 3551.727007] [<ffffffff88fd6d0d>] ? __alloc_skb+0x8d/0x2d0 [ 3551.727012] [<ffffffff89003f50>] ? rtnl_newlink+0x880/0x880 ... [ 3551.727104] [<ffffffff8911f7d5>] system_call_fastpath+0x1c/0x21 ... [ 3551.727164] RIP [<ffffffffc0840ee9>] bnxt_qplib_nq_stop_irq+0x59/0xb0 [bnxt_re] [ 3551.727175] RSP <ffff97e3173bf788> [ 3551.727177] CR2: 0000000000000000 Avoid this inconsistent state and system crash by acquiring the rtnl lock for the entire duration of device initialization. Re-factor the code to remove the rtnl lock from the individual function and acquire and release it from the caller. Fixes: 1ac5a4047975 ("RDMA/bnxt_re: Add bnxt_re RoCE driver") Fixes: 6e04b1035689 ("RDMA/bnxt_re: Fix broken RoCE driver due to recent L2 driver changes") Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-09-21 05:33:00 +00:00
rtnl_unlock();
locked = false;
/* Register ib dev */
rc = bnxt_re_register_ib(rdev);
if (rc) {
pr_err("Failed to register with IB: %#x\n", rc);
goto fail;
}
RDMA/bnxt_re: Fix system crash during RDMA resource initialization bnxt_re_ib_reg acquires and releases the rtnl lock whenever it accesses the L2 driver. The following sequence can trigger a crash Acquires the rtnl_lock -> Registers roce driver callback with L2 driver -> release the rtnl lock bnxt_re acquires the rtnl_lock -> Request for MSIx vectors -> release the rtnl_lock Issue happens when bnxt_re proceeds with remaining part of initialization and L2 driver invokes bnxt_ulp_irq_stop as a part of bnxt_open_nic. The crash is in bnxt_qplib_nq_stop_irq as the NQ structures are not initialized yet, <snip> [ 3551.726647] BUG: unable to handle kernel NULL pointer dereference at (null) [ 3551.726656] IP: [<ffffffffc0840ee9>] bnxt_qplib_nq_stop_irq+0x59/0xb0 [bnxt_re] [ 3551.726674] PGD 0 [ 3551.726679] Oops: 0002 1 SMP ... [ 3551.726822] Hardware name: Dell Inc. PowerEdge R720/08RW36, BIOS 2.4.3 07/09/2014 [ 3551.726826] task: ffff97e30eec5ee0 ti: ffff97e3173bc000 task.ti: ffff97e3173bc000 [ 3551.726829] RIP: 0010:[<ffffffffc0840ee9>] [<ffffffffc0840ee9>] bnxt_qplib_nq_stop_irq+0x59/0xb0 [bnxt_re] ... [ 3551.726872] Call Trace: [ 3551.726886] [<ffffffffc082cb9e>] bnxt_re_stop_irq+0x4e/0x70 [bnxt_re] [ 3551.726899] [<ffffffffc07d6a53>] bnxt_ulp_irq_stop+0x43/0x70 [bnxt_en] [ 3551.726908] [<ffffffffc07c82f4>] bnxt_reserve_rings+0x174/0x1e0 [bnxt_en] [ 3551.726917] [<ffffffffc07cafd8>] __bnxt_open_nic+0x368/0x9a0 [bnxt_en] [ 3551.726925] [<ffffffffc07cb62b>] bnxt_open_nic+0x1b/0x50 [bnxt_en] [ 3551.726934] [<ffffffffc07cc62f>] bnxt_setup_mq_tc+0x11f/0x260 [bnxt_en] [ 3551.726943] [<ffffffffc07d5f58>] bnxt_dcbnl_ieee_setets+0xb8/0x1f0 [bnxt_en] [ 3551.726954] [<ffffffff890f983a>] dcbnl_ieee_set+0x9a/0x250 [ 3551.726966] [<ffffffff88fd6d21>] ? __alloc_skb+0xa1/0x2d0 [ 3551.726972] [<ffffffff890f72fa>] dcb_doit+0x13a/0x210 [ 3551.726981] [<ffffffff89003ff7>] rtnetlink_rcv_msg+0xa7/0x260 [ 3551.726989] [<ffffffff88ffdb00>] ? rtnl_unicast+0x20/0x30 [ 3551.726996] [<ffffffff88bf9dc8>] ? __kmalloc_node_track_caller+0x58/0x290 [ 3551.727002] [<ffffffff890f7326>] ? dcb_doit+0x166/0x210 [ 3551.727007] [<ffffffff88fd6d0d>] ? __alloc_skb+0x8d/0x2d0 [ 3551.727012] [<ffffffff89003f50>] ? rtnl_newlink+0x880/0x880 ... [ 3551.727104] [<ffffffff8911f7d5>] system_call_fastpath+0x1c/0x21 ... [ 3551.727164] RIP [<ffffffffc0840ee9>] bnxt_qplib_nq_stop_irq+0x59/0xb0 [bnxt_re] [ 3551.727175] RSP <ffff97e3173bf788> [ 3551.727177] CR2: 0000000000000000 Avoid this inconsistent state and system crash by acquiring the rtnl lock for the entire duration of device initialization. Re-factor the code to remove the rtnl lock from the individual function and acquire and release it from the caller. Fixes: 1ac5a4047975 ("RDMA/bnxt_re: Add bnxt_re RoCE driver") Fixes: 6e04b1035689 ("RDMA/bnxt_re: Fix broken RoCE driver due to recent L2 driver changes") Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-09-21 05:33:00 +00:00
set_bit(BNXT_RE_FLAG_IBDEV_REGISTERED, &rdev->flags);
dev_info(rdev_to_dev(rdev), "Device registered successfully");
ib_get_eth_speed(&rdev->ibdev, 1, &rdev->active_speed,
&rdev->active_width);
set_bit(BNXT_RE_FLAG_ISSUE_ROCE_STATS, &rdev->flags);
bnxt_re_dispatch_event(&rdev->ibdev, NULL, 1, IB_EVENT_PORT_ACTIVE);
bnxt_re_dispatch_event(&rdev->ibdev, NULL, 1, IB_EVENT_GID_CHANGE);
return 0;
free_sctx:
RDMA/bnxt_re: Fix system crash during RDMA resource initialization bnxt_re_ib_reg acquires and releases the rtnl lock whenever it accesses the L2 driver. The following sequence can trigger a crash Acquires the rtnl_lock -> Registers roce driver callback with L2 driver -> release the rtnl lock bnxt_re acquires the rtnl_lock -> Request for MSIx vectors -> release the rtnl_lock Issue happens when bnxt_re proceeds with remaining part of initialization and L2 driver invokes bnxt_ulp_irq_stop as a part of bnxt_open_nic. The crash is in bnxt_qplib_nq_stop_irq as the NQ structures are not initialized yet, <snip> [ 3551.726647] BUG: unable to handle kernel NULL pointer dereference at (null) [ 3551.726656] IP: [<ffffffffc0840ee9>] bnxt_qplib_nq_stop_irq+0x59/0xb0 [bnxt_re] [ 3551.726674] PGD 0 [ 3551.726679] Oops: 0002 1 SMP ... [ 3551.726822] Hardware name: Dell Inc. PowerEdge R720/08RW36, BIOS 2.4.3 07/09/2014 [ 3551.726826] task: ffff97e30eec5ee0 ti: ffff97e3173bc000 task.ti: ffff97e3173bc000 [ 3551.726829] RIP: 0010:[<ffffffffc0840ee9>] [<ffffffffc0840ee9>] bnxt_qplib_nq_stop_irq+0x59/0xb0 [bnxt_re] ... [ 3551.726872] Call Trace: [ 3551.726886] [<ffffffffc082cb9e>] bnxt_re_stop_irq+0x4e/0x70 [bnxt_re] [ 3551.726899] [<ffffffffc07d6a53>] bnxt_ulp_irq_stop+0x43/0x70 [bnxt_en] [ 3551.726908] [<ffffffffc07c82f4>] bnxt_reserve_rings+0x174/0x1e0 [bnxt_en] [ 3551.726917] [<ffffffffc07cafd8>] __bnxt_open_nic+0x368/0x9a0 [bnxt_en] [ 3551.726925] [<ffffffffc07cb62b>] bnxt_open_nic+0x1b/0x50 [bnxt_en] [ 3551.726934] [<ffffffffc07cc62f>] bnxt_setup_mq_tc+0x11f/0x260 [bnxt_en] [ 3551.726943] [<ffffffffc07d5f58>] bnxt_dcbnl_ieee_setets+0xb8/0x1f0 [bnxt_en] [ 3551.726954] [<ffffffff890f983a>] dcbnl_ieee_set+0x9a/0x250 [ 3551.726966] [<ffffffff88fd6d21>] ? __alloc_skb+0xa1/0x2d0 [ 3551.726972] [<ffffffff890f72fa>] dcb_doit+0x13a/0x210 [ 3551.726981] [<ffffffff89003ff7>] rtnetlink_rcv_msg+0xa7/0x260 [ 3551.726989] [<ffffffff88ffdb00>] ? rtnl_unicast+0x20/0x30 [ 3551.726996] [<ffffffff88bf9dc8>] ? __kmalloc_node_track_caller+0x58/0x290 [ 3551.727002] [<ffffffff890f7326>] ? dcb_doit+0x166/0x210 [ 3551.727007] [<ffffffff88fd6d0d>] ? __alloc_skb+0x8d/0x2d0 [ 3551.727012] [<ffffffff89003f50>] ? rtnl_newlink+0x880/0x880 ... [ 3551.727104] [<ffffffff8911f7d5>] system_call_fastpath+0x1c/0x21 ... [ 3551.727164] RIP [<ffffffffc0840ee9>] bnxt_qplib_nq_stop_irq+0x59/0xb0 [bnxt_re] [ 3551.727175] RSP <ffff97e3173bf788> [ 3551.727177] CR2: 0000000000000000 Avoid this inconsistent state and system crash by acquiring the rtnl lock for the entire duration of device initialization. Re-factor the code to remove the rtnl lock from the individual function and acquire and release it from the caller. Fixes: 1ac5a4047975 ("RDMA/bnxt_re: Add bnxt_re RoCE driver") Fixes: 6e04b1035689 ("RDMA/bnxt_re: Fix broken RoCE driver due to recent L2 driver changes") Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-09-21 05:33:00 +00:00
bnxt_re_net_stats_ctx_free(rdev, rdev->qplib_ctx.stats.fw_id);
free_ctx:
bnxt_qplib_free_ctx(rdev->en_dev->pdev, &rdev->qplib_ctx);
disable_rcfw:
bnxt_qplib_disable_rcfw_channel(&rdev->rcfw);
free_ring:
RDMA/bnxt_re: Fix system crash during RDMA resource initialization bnxt_re_ib_reg acquires and releases the rtnl lock whenever it accesses the L2 driver. The following sequence can trigger a crash Acquires the rtnl_lock -> Registers roce driver callback with L2 driver -> release the rtnl lock bnxt_re acquires the rtnl_lock -> Request for MSIx vectors -> release the rtnl_lock Issue happens when bnxt_re proceeds with remaining part of initialization and L2 driver invokes bnxt_ulp_irq_stop as a part of bnxt_open_nic. The crash is in bnxt_qplib_nq_stop_irq as the NQ structures are not initialized yet, <snip> [ 3551.726647] BUG: unable to handle kernel NULL pointer dereference at (null) [ 3551.726656] IP: [<ffffffffc0840ee9>] bnxt_qplib_nq_stop_irq+0x59/0xb0 [bnxt_re] [ 3551.726674] PGD 0 [ 3551.726679] Oops: 0002 1 SMP ... [ 3551.726822] Hardware name: Dell Inc. PowerEdge R720/08RW36, BIOS 2.4.3 07/09/2014 [ 3551.726826] task: ffff97e30eec5ee0 ti: ffff97e3173bc000 task.ti: ffff97e3173bc000 [ 3551.726829] RIP: 0010:[<ffffffffc0840ee9>] [<ffffffffc0840ee9>] bnxt_qplib_nq_stop_irq+0x59/0xb0 [bnxt_re] ... [ 3551.726872] Call Trace: [ 3551.726886] [<ffffffffc082cb9e>] bnxt_re_stop_irq+0x4e/0x70 [bnxt_re] [ 3551.726899] [<ffffffffc07d6a53>] bnxt_ulp_irq_stop+0x43/0x70 [bnxt_en] [ 3551.726908] [<ffffffffc07c82f4>] bnxt_reserve_rings+0x174/0x1e0 [bnxt_en] [ 3551.726917] [<ffffffffc07cafd8>] __bnxt_open_nic+0x368/0x9a0 [bnxt_en] [ 3551.726925] [<ffffffffc07cb62b>] bnxt_open_nic+0x1b/0x50 [bnxt_en] [ 3551.726934] [<ffffffffc07cc62f>] bnxt_setup_mq_tc+0x11f/0x260 [bnxt_en] [ 3551.726943] [<ffffffffc07d5f58>] bnxt_dcbnl_ieee_setets+0xb8/0x1f0 [bnxt_en] [ 3551.726954] [<ffffffff890f983a>] dcbnl_ieee_set+0x9a/0x250 [ 3551.726966] [<ffffffff88fd6d21>] ? __alloc_skb+0xa1/0x2d0 [ 3551.726972] [<ffffffff890f72fa>] dcb_doit+0x13a/0x210 [ 3551.726981] [<ffffffff89003ff7>] rtnetlink_rcv_msg+0xa7/0x260 [ 3551.726989] [<ffffffff88ffdb00>] ? rtnl_unicast+0x20/0x30 [ 3551.726996] [<ffffffff88bf9dc8>] ? __kmalloc_node_track_caller+0x58/0x290 [ 3551.727002] [<ffffffff890f7326>] ? dcb_doit+0x166/0x210 [ 3551.727007] [<ffffffff88fd6d0d>] ? __alloc_skb+0x8d/0x2d0 [ 3551.727012] [<ffffffff89003f50>] ? rtnl_newlink+0x880/0x880 ... [ 3551.727104] [<ffffffff8911f7d5>] system_call_fastpath+0x1c/0x21 ... [ 3551.727164] RIP [<ffffffffc0840ee9>] bnxt_qplib_nq_stop_irq+0x59/0xb0 [bnxt_re] [ 3551.727175] RSP <ffff97e3173bf788> [ 3551.727177] CR2: 0000000000000000 Avoid this inconsistent state and system crash by acquiring the rtnl lock for the entire duration of device initialization. Re-factor the code to remove the rtnl lock from the individual function and acquire and release it from the caller. Fixes: 1ac5a4047975 ("RDMA/bnxt_re: Add bnxt_re RoCE driver") Fixes: 6e04b1035689 ("RDMA/bnxt_re: Fix broken RoCE driver due to recent L2 driver changes") Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-09-21 05:33:00 +00:00
bnxt_re_net_ring_free(rdev, rdev->rcfw.creq_ring_id);
free_rcfw:
bnxt_qplib_free_rcfw_channel(&rdev->rcfw);
fail:
RDMA/bnxt_re: Fix system crash during RDMA resource initialization bnxt_re_ib_reg acquires and releases the rtnl lock whenever it accesses the L2 driver. The following sequence can trigger a crash Acquires the rtnl_lock -> Registers roce driver callback with L2 driver -> release the rtnl lock bnxt_re acquires the rtnl_lock -> Request for MSIx vectors -> release the rtnl_lock Issue happens when bnxt_re proceeds with remaining part of initialization and L2 driver invokes bnxt_ulp_irq_stop as a part of bnxt_open_nic. The crash is in bnxt_qplib_nq_stop_irq as the NQ structures are not initialized yet, <snip> [ 3551.726647] BUG: unable to handle kernel NULL pointer dereference at (null) [ 3551.726656] IP: [<ffffffffc0840ee9>] bnxt_qplib_nq_stop_irq+0x59/0xb0 [bnxt_re] [ 3551.726674] PGD 0 [ 3551.726679] Oops: 0002 1 SMP ... [ 3551.726822] Hardware name: Dell Inc. PowerEdge R720/08RW36, BIOS 2.4.3 07/09/2014 [ 3551.726826] task: ffff97e30eec5ee0 ti: ffff97e3173bc000 task.ti: ffff97e3173bc000 [ 3551.726829] RIP: 0010:[<ffffffffc0840ee9>] [<ffffffffc0840ee9>] bnxt_qplib_nq_stop_irq+0x59/0xb0 [bnxt_re] ... [ 3551.726872] Call Trace: [ 3551.726886] [<ffffffffc082cb9e>] bnxt_re_stop_irq+0x4e/0x70 [bnxt_re] [ 3551.726899] [<ffffffffc07d6a53>] bnxt_ulp_irq_stop+0x43/0x70 [bnxt_en] [ 3551.726908] [<ffffffffc07c82f4>] bnxt_reserve_rings+0x174/0x1e0 [bnxt_en] [ 3551.726917] [<ffffffffc07cafd8>] __bnxt_open_nic+0x368/0x9a0 [bnxt_en] [ 3551.726925] [<ffffffffc07cb62b>] bnxt_open_nic+0x1b/0x50 [bnxt_en] [ 3551.726934] [<ffffffffc07cc62f>] bnxt_setup_mq_tc+0x11f/0x260 [bnxt_en] [ 3551.726943] [<ffffffffc07d5f58>] bnxt_dcbnl_ieee_setets+0xb8/0x1f0 [bnxt_en] [ 3551.726954] [<ffffffff890f983a>] dcbnl_ieee_set+0x9a/0x250 [ 3551.726966] [<ffffffff88fd6d21>] ? __alloc_skb+0xa1/0x2d0 [ 3551.726972] [<ffffffff890f72fa>] dcb_doit+0x13a/0x210 [ 3551.726981] [<ffffffff89003ff7>] rtnetlink_rcv_msg+0xa7/0x260 [ 3551.726989] [<ffffffff88ffdb00>] ? rtnl_unicast+0x20/0x30 [ 3551.726996] [<ffffffff88bf9dc8>] ? __kmalloc_node_track_caller+0x58/0x290 [ 3551.727002] [<ffffffff890f7326>] ? dcb_doit+0x166/0x210 [ 3551.727007] [<ffffffff88fd6d0d>] ? __alloc_skb+0x8d/0x2d0 [ 3551.727012] [<ffffffff89003f50>] ? rtnl_newlink+0x880/0x880 ... [ 3551.727104] [<ffffffff8911f7d5>] system_call_fastpath+0x1c/0x21 ... [ 3551.727164] RIP [<ffffffffc0840ee9>] bnxt_qplib_nq_stop_irq+0x59/0xb0 [bnxt_re] [ 3551.727175] RSP <ffff97e3173bf788> [ 3551.727177] CR2: 0000000000000000 Avoid this inconsistent state and system crash by acquiring the rtnl lock for the entire duration of device initialization. Re-factor the code to remove the rtnl lock from the individual function and acquire and release it from the caller. Fixes: 1ac5a4047975 ("RDMA/bnxt_re: Add bnxt_re RoCE driver") Fixes: 6e04b1035689 ("RDMA/bnxt_re: Fix broken RoCE driver due to recent L2 driver changes") Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-09-21 05:33:00 +00:00
if (!locked)
rtnl_lock();
bnxt_re_ib_unreg(rdev);
rtnl_unlock();
return rc;
}
static void bnxt_re_dev_unreg(struct bnxt_re_dev *rdev)
{
struct bnxt_en_dev *en_dev = rdev->en_dev;
struct net_device *netdev = rdev->netdev;
bnxt_re_dev_remove(rdev);
if (netdev)
bnxt_re_dev_unprobe(netdev, en_dev);
}
static int bnxt_re_dev_reg(struct bnxt_re_dev **rdev, struct net_device *netdev)
{
struct bnxt_en_dev *en_dev;
int rc = 0;
if (!is_bnxt_re_dev(netdev))
return -ENODEV;
en_dev = bnxt_re_dev_probe(netdev);
if (IS_ERR(en_dev)) {
if (en_dev != ERR_PTR(-ENODEV))
pr_err("%s: Failed to probe\n", ROCE_DRV_MODULE_NAME);
rc = PTR_ERR(en_dev);
goto exit;
}
*rdev = bnxt_re_dev_add(netdev, en_dev);
if (!*rdev) {
rc = -ENOMEM;
bnxt_re_dev_unprobe(netdev, en_dev);
goto exit;
}
exit:
return rc;
}
static void bnxt_re_remove_one(struct bnxt_re_dev *rdev)
{
pci_dev_put(rdev->en_dev->pdev);
}
/* Handle all deferred netevents tasks */
static void bnxt_re_task(struct work_struct *work)
{
struct bnxt_re_work *re_work;
struct bnxt_re_dev *rdev;
int rc = 0;
re_work = container_of(work, struct bnxt_re_work, work);
rdev = re_work->rdev;
if (re_work->event != NETDEV_REGISTER &&
!test_bit(BNXT_RE_FLAG_IBDEV_REGISTERED, &rdev->flags))
return;
switch (re_work->event) {
case NETDEV_REGISTER:
rc = bnxt_re_ib_reg(rdev);
if (rc) {
dev_err(rdev_to_dev(rdev),
"Failed to register with IB: %#x", rc);
bnxt_re_remove_one(rdev);
bnxt_re_dev_unreg(rdev);
}
break;
case NETDEV_UP:
bnxt_re_dispatch_event(&rdev->ibdev, NULL, 1,
IB_EVENT_PORT_ACTIVE);
break;
case NETDEV_DOWN:
bnxt_re_dev_stop(rdev);
break;
case NETDEV_CHANGE:
if (!netif_carrier_ok(rdev->netdev))
bnxt_re_dev_stop(rdev);
else if (netif_carrier_ok(rdev->netdev))
bnxt_re_dispatch_event(&rdev->ibdev, NULL, 1,
IB_EVENT_PORT_ACTIVE);
ib_get_eth_speed(&rdev->ibdev, 1, &rdev->active_speed,
&rdev->active_width);
break;
default:
break;
}
smp_mb__before_atomic();
atomic_dec(&rdev->sched_count);
kfree(re_work);
}
static void bnxt_re_init_one(struct bnxt_re_dev *rdev)
{
pci_dev_get(rdev->en_dev->pdev);
}
/*
* "Notifier chain callback can be invoked for the same chain from
* different CPUs at the same time".
*
* For cases when the netdev is already present, our call to the
* register_netdevice_notifier() will actually get the rtnl_lock()
* before sending NETDEV_REGISTER and (if up) NETDEV_UP
* events.
*
* But for cases when the netdev is not already present, the notifier
* chain is subjected to be invoked from different CPUs simultaneously.
*
* This is protected by the netdev_mutex.
*/
static int bnxt_re_netdev_event(struct notifier_block *notifier,
unsigned long event, void *ptr)
{
struct net_device *real_dev, *netdev = netdev_notifier_info_to_dev(ptr);
struct bnxt_re_work *re_work;
struct bnxt_re_dev *rdev;
int rc = 0;
bool sch_work = false;
real_dev = rdma_vlan_dev_real_dev(netdev);
if (!real_dev)
real_dev = netdev;
rdev = bnxt_re_from_netdev(real_dev);
if (!rdev && event != NETDEV_REGISTER)
goto exit;
if (real_dev != netdev)
goto exit;
switch (event) {
case NETDEV_REGISTER:
if (rdev)
break;
rc = bnxt_re_dev_reg(&rdev, real_dev);
if (rc == -ENODEV)
break;
if (rc) {
pr_err("Failed to register with the device %s: %#x\n",
real_dev->name, rc);
break;
}
bnxt_re_init_one(rdev);
sch_work = true;
break;
case NETDEV_UNREGISTER:
/* netdev notifier will call NETDEV_UNREGISTER again later since
* we are still holding the reference to the netdev
*/
if (atomic_read(&rdev->sched_count) > 0)
goto exit;
RDMA/bnxt_re: Fix system crash during RDMA resource initialization bnxt_re_ib_reg acquires and releases the rtnl lock whenever it accesses the L2 driver. The following sequence can trigger a crash Acquires the rtnl_lock -> Registers roce driver callback with L2 driver -> release the rtnl lock bnxt_re acquires the rtnl_lock -> Request for MSIx vectors -> release the rtnl_lock Issue happens when bnxt_re proceeds with remaining part of initialization and L2 driver invokes bnxt_ulp_irq_stop as a part of bnxt_open_nic. The crash is in bnxt_qplib_nq_stop_irq as the NQ structures are not initialized yet, <snip> [ 3551.726647] BUG: unable to handle kernel NULL pointer dereference at (null) [ 3551.726656] IP: [<ffffffffc0840ee9>] bnxt_qplib_nq_stop_irq+0x59/0xb0 [bnxt_re] [ 3551.726674] PGD 0 [ 3551.726679] Oops: 0002 1 SMP ... [ 3551.726822] Hardware name: Dell Inc. PowerEdge R720/08RW36, BIOS 2.4.3 07/09/2014 [ 3551.726826] task: ffff97e30eec5ee0 ti: ffff97e3173bc000 task.ti: ffff97e3173bc000 [ 3551.726829] RIP: 0010:[<ffffffffc0840ee9>] [<ffffffffc0840ee9>] bnxt_qplib_nq_stop_irq+0x59/0xb0 [bnxt_re] ... [ 3551.726872] Call Trace: [ 3551.726886] [<ffffffffc082cb9e>] bnxt_re_stop_irq+0x4e/0x70 [bnxt_re] [ 3551.726899] [<ffffffffc07d6a53>] bnxt_ulp_irq_stop+0x43/0x70 [bnxt_en] [ 3551.726908] [<ffffffffc07c82f4>] bnxt_reserve_rings+0x174/0x1e0 [bnxt_en] [ 3551.726917] [<ffffffffc07cafd8>] __bnxt_open_nic+0x368/0x9a0 [bnxt_en] [ 3551.726925] [<ffffffffc07cb62b>] bnxt_open_nic+0x1b/0x50 [bnxt_en] [ 3551.726934] [<ffffffffc07cc62f>] bnxt_setup_mq_tc+0x11f/0x260 [bnxt_en] [ 3551.726943] [<ffffffffc07d5f58>] bnxt_dcbnl_ieee_setets+0xb8/0x1f0 [bnxt_en] [ 3551.726954] [<ffffffff890f983a>] dcbnl_ieee_set+0x9a/0x250 [ 3551.726966] [<ffffffff88fd6d21>] ? __alloc_skb+0xa1/0x2d0 [ 3551.726972] [<ffffffff890f72fa>] dcb_doit+0x13a/0x210 [ 3551.726981] [<ffffffff89003ff7>] rtnetlink_rcv_msg+0xa7/0x260 [ 3551.726989] [<ffffffff88ffdb00>] ? rtnl_unicast+0x20/0x30 [ 3551.726996] [<ffffffff88bf9dc8>] ? __kmalloc_node_track_caller+0x58/0x290 [ 3551.727002] [<ffffffff890f7326>] ? dcb_doit+0x166/0x210 [ 3551.727007] [<ffffffff88fd6d0d>] ? __alloc_skb+0x8d/0x2d0 [ 3551.727012] [<ffffffff89003f50>] ? rtnl_newlink+0x880/0x880 ... [ 3551.727104] [<ffffffff8911f7d5>] system_call_fastpath+0x1c/0x21 ... [ 3551.727164] RIP [<ffffffffc0840ee9>] bnxt_qplib_nq_stop_irq+0x59/0xb0 [bnxt_re] [ 3551.727175] RSP <ffff97e3173bf788> [ 3551.727177] CR2: 0000000000000000 Avoid this inconsistent state and system crash by acquiring the rtnl lock for the entire duration of device initialization. Re-factor the code to remove the rtnl lock from the individual function and acquire and release it from the caller. Fixes: 1ac5a4047975 ("RDMA/bnxt_re: Add bnxt_re RoCE driver") Fixes: 6e04b1035689 ("RDMA/bnxt_re: Fix broken RoCE driver due to recent L2 driver changes") Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-09-21 05:33:00 +00:00
bnxt_re_ib_unreg(rdev);
bnxt_re_remove_one(rdev);
bnxt_re_dev_unreg(rdev);
break;
default:
sch_work = true;
break;
}
if (sch_work) {
/* Allocate for the deferred task */
re_work = kzalloc(sizeof(*re_work), GFP_ATOMIC);
if (re_work) {
re_work->rdev = rdev;
re_work->event = event;
re_work->vlan_dev = (real_dev == netdev ?
NULL : netdev);
INIT_WORK(&re_work->work, bnxt_re_task);
atomic_inc(&rdev->sched_count);
queue_work(bnxt_re_wq, &re_work->work);
}
}
exit:
return NOTIFY_DONE;
}
static struct notifier_block bnxt_re_netdev_notifier = {
.notifier_call = bnxt_re_netdev_event
};
static int __init bnxt_re_mod_init(void)
{
int rc = 0;
pr_info("%s: %s", ROCE_DRV_MODULE_NAME, version);
bnxt_re_wq = create_singlethread_workqueue("bnxt_re");
if (!bnxt_re_wq)
return -ENOMEM;
INIT_LIST_HEAD(&bnxt_re_dev_list);
rc = register_netdevice_notifier(&bnxt_re_netdev_notifier);
if (rc) {
pr_err("%s: Cannot register to netdevice_notifier",
ROCE_DRV_MODULE_NAME);
goto err_netdev;
}
return 0;
err_netdev:
destroy_workqueue(bnxt_re_wq);
return rc;
}
static void __exit bnxt_re_mod_exit(void)
{
struct bnxt_re_dev *rdev, *next;
LIST_HEAD(to_be_deleted);
mutex_lock(&bnxt_re_dev_lock);
/* Free all adapter allocated resources */
if (!list_empty(&bnxt_re_dev_list))
list_splice_init(&bnxt_re_dev_list, &to_be_deleted);
mutex_unlock(&bnxt_re_dev_lock);
/*
* Cleanup the devices in reverse order so that the VF device
* cleanup is done before PF cleanup
*/
list_for_each_entry_safe_reverse(rdev, next, &to_be_deleted, list) {
dev_info(rdev_to_dev(rdev), "Unregistering Device");
/*
* Flush out any scheduled tasks before destroying the
* resources
*/
flush_workqueue(bnxt_re_wq);
bnxt_re_dev_stop(rdev);
RDMA/bnxt_re: Fix system crash during RDMA resource initialization bnxt_re_ib_reg acquires and releases the rtnl lock whenever it accesses the L2 driver. The following sequence can trigger a crash Acquires the rtnl_lock -> Registers roce driver callback with L2 driver -> release the rtnl lock bnxt_re acquires the rtnl_lock -> Request for MSIx vectors -> release the rtnl_lock Issue happens when bnxt_re proceeds with remaining part of initialization and L2 driver invokes bnxt_ulp_irq_stop as a part of bnxt_open_nic. The crash is in bnxt_qplib_nq_stop_irq as the NQ structures are not initialized yet, <snip> [ 3551.726647] BUG: unable to handle kernel NULL pointer dereference at (null) [ 3551.726656] IP: [<ffffffffc0840ee9>] bnxt_qplib_nq_stop_irq+0x59/0xb0 [bnxt_re] [ 3551.726674] PGD 0 [ 3551.726679] Oops: 0002 1 SMP ... [ 3551.726822] Hardware name: Dell Inc. PowerEdge R720/08RW36, BIOS 2.4.3 07/09/2014 [ 3551.726826] task: ffff97e30eec5ee0 ti: ffff97e3173bc000 task.ti: ffff97e3173bc000 [ 3551.726829] RIP: 0010:[<ffffffffc0840ee9>] [<ffffffffc0840ee9>] bnxt_qplib_nq_stop_irq+0x59/0xb0 [bnxt_re] ... [ 3551.726872] Call Trace: [ 3551.726886] [<ffffffffc082cb9e>] bnxt_re_stop_irq+0x4e/0x70 [bnxt_re] [ 3551.726899] [<ffffffffc07d6a53>] bnxt_ulp_irq_stop+0x43/0x70 [bnxt_en] [ 3551.726908] [<ffffffffc07c82f4>] bnxt_reserve_rings+0x174/0x1e0 [bnxt_en] [ 3551.726917] [<ffffffffc07cafd8>] __bnxt_open_nic+0x368/0x9a0 [bnxt_en] [ 3551.726925] [<ffffffffc07cb62b>] bnxt_open_nic+0x1b/0x50 [bnxt_en] [ 3551.726934] [<ffffffffc07cc62f>] bnxt_setup_mq_tc+0x11f/0x260 [bnxt_en] [ 3551.726943] [<ffffffffc07d5f58>] bnxt_dcbnl_ieee_setets+0xb8/0x1f0 [bnxt_en] [ 3551.726954] [<ffffffff890f983a>] dcbnl_ieee_set+0x9a/0x250 [ 3551.726966] [<ffffffff88fd6d21>] ? __alloc_skb+0xa1/0x2d0 [ 3551.726972] [<ffffffff890f72fa>] dcb_doit+0x13a/0x210 [ 3551.726981] [<ffffffff89003ff7>] rtnetlink_rcv_msg+0xa7/0x260 [ 3551.726989] [<ffffffff88ffdb00>] ? rtnl_unicast+0x20/0x30 [ 3551.726996] [<ffffffff88bf9dc8>] ? __kmalloc_node_track_caller+0x58/0x290 [ 3551.727002] [<ffffffff890f7326>] ? dcb_doit+0x166/0x210 [ 3551.727007] [<ffffffff88fd6d0d>] ? __alloc_skb+0x8d/0x2d0 [ 3551.727012] [<ffffffff89003f50>] ? rtnl_newlink+0x880/0x880 ... [ 3551.727104] [<ffffffff8911f7d5>] system_call_fastpath+0x1c/0x21 ... [ 3551.727164] RIP [<ffffffffc0840ee9>] bnxt_qplib_nq_stop_irq+0x59/0xb0 [bnxt_re] [ 3551.727175] RSP <ffff97e3173bf788> [ 3551.727177] CR2: 0000000000000000 Avoid this inconsistent state and system crash by acquiring the rtnl lock for the entire duration of device initialization. Re-factor the code to remove the rtnl lock from the individual function and acquire and release it from the caller. Fixes: 1ac5a4047975 ("RDMA/bnxt_re: Add bnxt_re RoCE driver") Fixes: 6e04b1035689 ("RDMA/bnxt_re: Fix broken RoCE driver due to recent L2 driver changes") Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-09-21 05:33:00 +00:00
/* Acquire the rtnl_lock as the L2 resources are freed here */
rtnl_lock();
bnxt_re_ib_unreg(rdev);
rtnl_unlock();
bnxt_re_remove_one(rdev);
bnxt_re_dev_unreg(rdev);
}
unregister_netdevice_notifier(&bnxt_re_netdev_notifier);
if (bnxt_re_wq)
destroy_workqueue(bnxt_re_wq);
}
module_init(bnxt_re_mod_init);
module_exit(bnxt_re_mod_exit);