License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 14:07:57 +00:00
|
|
|
/* SPDX-License-Identifier: GPL-2.0 */
|
blk-mq: new multi-queue block IO queueing mechanism
Linux currently has two models for block devices:
- The classic request_fn based approach, where drivers use struct
request units for IO. The block layer provides various helper
functionalities to let drivers share code, things like tag
management, timeout handling, queueing, etc.
- The "stacked" approach, where a driver squeezes in between the
block layer and IO submitter. Since this bypasses the IO stack,
driver generally have to manage everything themselves.
With drivers being written for new high IOPS devices, the classic
request_fn based driver doesn't work well enough. The design dates
back to when both SMP and high IOPS was rare. It has problems with
scaling to bigger machines, and runs into scaling issues even on
smaller machines when you have IOPS in the hundreds of thousands
per device.
The stacked approach is then most often selected as the model
for the driver. But this means that everybody has to re-invent
everything, and along with that we get all the problems again
that the shared approach solved.
This commit introduces blk-mq, block multi queue support. The
design is centered around per-cpu queues for queueing IO, which
then funnel down into x number of hardware submission queues.
We might have a 1:1 mapping between the two, or it might be
an N:M mapping. That all depends on what the hardware supports.
blk-mq provides various helper functions, which include:
- Scalable support for request tagging. Most devices need to
be able to uniquely identify a request both in the driver and
to the hardware. The tagging uses per-cpu caches for freed
tags, to enable cache hot reuse.
- Timeout handling without tracking request on a per-device
basis. Basically the driver should be able to get a notification,
if a request happens to fail.
- Optional support for non 1:1 mappings between issue and
submission queues. blk-mq can redirect IO completions to the
desired location.
- Support for per-request payloads. Drivers almost always need
to associate a request structure with some driver private
command structure. Drivers can tell blk-mq this at init time,
and then any request handed to the driver will have the
required size of memory associated with it.
- Support for merging of IO, and plugging. The stacked model
gets neither of these. Even for high IOPS devices, merging
sequential IO reduces per-command overhead and thus
increases bandwidth.
For now, this is provided as a potential 3rd queueing model, with
the hope being that, as it matures, it can replace both the classic
and stacked model. That would get us back to having just 1 real
model for block devices, leaving the stacked approach to dm/md
devices (as it was originally intended).
Contributions in this patch from the following people:
Shaohua Li <shli@fusionio.com>
Alexander Gordeev <agordeev@redhat.com>
Christoph Hellwig <hch@infradead.org>
Mike Christie <michaelc@cs.wisc.edu>
Matias Bjorling <m@bjorling.me>
Jeff Moyer <jmoyer@redhat.com>
Acked-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-10-24 08:20:05 +00:00
|
|
|
#ifndef INT_BLK_MQ_TAG_H
|
|
|
|
|
#define INT_BLK_MQ_TAG_H
|
|
|
|
|
|
2021-09-20 12:33:23 +00:00
|
|
|
struct blk_mq_alloc_data;
|
|
|
|
|
|
2014-04-15 20:14:00 +00:00
|
|
|
/*
|
|
|
|
|
* Tag address space map.
|
|
|
|
|
*/
|
|
|
|
|
struct blk_mq_tags {
|
|
|
|
|
unsigned int nr_tags;
|
|
|
|
|
unsigned int nr_reserved_tags;
|
|
|
|
|
|
2014-05-13 21:10:52 +00:00
|
|
|
atomic_t active_queues;
|
|
|
|
|
|
2021-10-05 10:23:38 +00:00
|
|
|
struct sbitmap_queue bitmap_tags;
|
|
|
|
|
struct sbitmap_queue breserved_tags;
|
2014-04-15 20:14:00 +00:00
|
|
|
|
|
|
|
|
struct request **rqs;
|
2017-01-13 21:39:30 +00:00
|
|
|
struct request **static_rqs;
|
2014-04-15 20:14:00 +00:00
|
|
|
struct list_head page_list;
|
2021-05-11 15:22:35 +00:00
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* used to clear request reference in rqs[] before freeing one
|
|
|
|
|
* request pool
|
|
|
|
|
*/
|
|
|
|
|
spinlock_t lock;
|
2014-04-15 20:14:00 +00:00
|
|
|
};
|
|
|
|
|
|
2020-08-19 15:20:22 +00:00
|
|
|
extern struct blk_mq_tags *blk_mq_init_tags(unsigned int nr_tags,
|
|
|
|
|
unsigned int reserved_tags,
|
2021-10-05 10:23:37 +00:00
|
|
|
int node, int alloc_policy);
|
|
|
|
|
extern void blk_mq_free_tags(struct blk_mq_tags *tags);
|
2021-05-13 12:00:57 +00:00
|
|
|
extern int blk_mq_init_bitmaps(struct sbitmap_queue *bitmap_tags,
|
|
|
|
|
struct sbitmap_queue *breserved_tags,
|
|
|
|
|
unsigned int queue_depth,
|
|
|
|
|
unsigned int reserved,
|
|
|
|
|
int node, int alloc_policy);
|
blk-mq: new multi-queue block IO queueing mechanism
Linux currently has two models for block devices:
- The classic request_fn based approach, where drivers use struct
request units for IO. The block layer provides various helper
functionalities to let drivers share code, things like tag
management, timeout handling, queueing, etc.
- The "stacked" approach, where a driver squeezes in between the
block layer and IO submitter. Since this bypasses the IO stack,
driver generally have to manage everything themselves.
With drivers being written for new high IOPS devices, the classic
request_fn based driver doesn't work well enough. The design dates
back to when both SMP and high IOPS was rare. It has problems with
scaling to bigger machines, and runs into scaling issues even on
smaller machines when you have IOPS in the hundreds of thousands
per device.
The stacked approach is then most often selected as the model
for the driver. But this means that everybody has to re-invent
everything, and along with that we get all the problems again
that the shared approach solved.
This commit introduces blk-mq, block multi queue support. The
design is centered around per-cpu queues for queueing IO, which
then funnel down into x number of hardware submission queues.
We might have a 1:1 mapping between the two, or it might be
an N:M mapping. That all depends on what the hardware supports.
blk-mq provides various helper functions, which include:
- Scalable support for request tagging. Most devices need to
be able to uniquely identify a request both in the driver and
to the hardware. The tagging uses per-cpu caches for freed
tags, to enable cache hot reuse.
- Timeout handling without tracking request on a per-device
basis. Basically the driver should be able to get a notification,
if a request happens to fail.
- Optional support for non 1:1 mappings between issue and
submission queues. blk-mq can redirect IO completions to the
desired location.
- Support for per-request payloads. Drivers almost always need
to associate a request structure with some driver private
command structure. Drivers can tell blk-mq this at init time,
and then any request handed to the driver will have the
required size of memory associated with it.
- Support for merging of IO, and plugging. The stacked model
gets neither of these. Even for high IOPS devices, merging
sequential IO reduces per-command overhead and thus
increases bandwidth.
For now, this is provided as a potential 3rd queueing model, with
the hope being that, as it matures, it can replace both the classic
and stacked model. That would get us back to having just 1 real
model for block devices, leaving the stacked approach to dm/md
devices (as it was originally intended).
Contributions in this patch from the following people:
Shaohua Li <shli@fusionio.com>
Alexander Gordeev <agordeev@redhat.com>
Christoph Hellwig <hch@infradead.org>
Mike Christie <michaelc@cs.wisc.edu>
Matias Bjorling <m@bjorling.me>
Jeff Moyer <jmoyer@redhat.com>
Acked-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-10-24 08:20:05 +00:00
|
|
|
|
2014-05-31 16:43:37 +00:00
|
|
|
extern unsigned int blk_mq_get_tag(struct blk_mq_alloc_data *data);
|
2020-02-26 12:10:15 +00:00
|
|
|
extern void blk_mq_put_tag(struct blk_mq_tags *tags, struct blk_mq_ctx *ctx,
|
|
|
|
|
unsigned int tag);
|
2017-01-19 17:59:07 +00:00
|
|
|
extern int blk_mq_tag_update_depth(struct blk_mq_hw_ctx *hctx,
|
|
|
|
|
struct blk_mq_tags **tags,
|
|
|
|
|
unsigned int depth, bool can_grow);
|
blk-mq: Facilitate a shared sbitmap per tagset
Some SCSI HBAs (such as HPSA, megaraid, mpt3sas, hisi_sas_v3 ..) support
multiple reply queues with single hostwide tags.
In addition, these drivers want to use interrupt assignment in
pci_alloc_irq_vectors(PCI_IRQ_AFFINITY). However, as discussed in [0],
CPU hotplug may cause in-flight IO completion to not be serviced when an
interrupt is shutdown. That problem is solved in commit bf0beec0607d
("blk-mq: drain I/O when all CPUs in a hctx are offline").
However, to take advantage of that blk-mq feature, the HBA HW queuess are
required to be mapped to that of the blk-mq hctx's; to do that, the HBA HW
queues need to be exposed to the upper layer.
In making that transition, the per-SCSI command request tags are no
longer unique per Scsi host - they are just unique per hctx. As such, the
HBA LLDD would have to generate this tag internally, which has a certain
performance overhead.
However another problem is that blk-mq assumes the host may accept
(Scsi_host.can_queue * #hw queue) commands. In commit 6eb045e092ef ("scsi:
core: avoid host-wide host_busy counter for scsi_mq"), the Scsi host busy
counter was removed, which would stop the LLDD being sent more than
.can_queue commands; however, it should still be ensured that the block
layer does not issue more than .can_queue commands to the Scsi host.
To solve this problem, introduce a shared sbitmap per blk_mq_tag_set,
which may be requested at init time.
New flag BLK_MQ_F_TAG_HCTX_SHARED should be set when requesting the
tagset to indicate whether the shared sbitmap should be used.
Even when BLK_MQ_F_TAG_HCTX_SHARED is set, a full set of tags and requests
are still allocated per hctx; the reason for this is that if tags and
requests were only allocated for a single hctx - like hctx0 - it may break
block drivers which expect a request be associated with a specific hctx,
i.e. not always hctx0. This will introduce extra memory usage.
This change is based on work originally from Ming Lei in [1] and from
Bart's suggestion in [2].
[0] https://lore.kernel.org/linux-block/alpine.DEB.2.21.1904051331270.1802@nanos.tec.linutronix.de/
[1] https://lore.kernel.org/linux-block/20190531022801.10003-1-ming.lei@redhat.com/
[2] https://lore.kernel.org/linux-block/ff77beff-5fd9-9f05-12b6-826922bace1f@huawei.com/T/#m3db0a602f095cbcbff27e9c884d6b4ae826144be
Signed-off-by: John Garry <john.garry@huawei.com>
Tested-by: Don Brace<don.brace@microsemi.com> #SCSI resv cmds patches used
Tested-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-08-19 15:20:24 +00:00
|
|
|
extern void blk_mq_tag_resize_shared_sbitmap(struct blk_mq_tag_set *set,
|
|
|
|
|
unsigned int size);
|
2021-10-05 10:23:34 +00:00
|
|
|
extern void blk_mq_tag_update_sched_shared_sbitmap(struct request_queue *q);
|
blk-mq: Facilitate a shared sbitmap per tagset
Some SCSI HBAs (such as HPSA, megaraid, mpt3sas, hisi_sas_v3 ..) support
multiple reply queues with single hostwide tags.
In addition, these drivers want to use interrupt assignment in
pci_alloc_irq_vectors(PCI_IRQ_AFFINITY). However, as discussed in [0],
CPU hotplug may cause in-flight IO completion to not be serviced when an
interrupt is shutdown. That problem is solved in commit bf0beec0607d
("blk-mq: drain I/O when all CPUs in a hctx are offline").
However, to take advantage of that blk-mq feature, the HBA HW queuess are
required to be mapped to that of the blk-mq hctx's; to do that, the HBA HW
queues need to be exposed to the upper layer.
In making that transition, the per-SCSI command request tags are no
longer unique per Scsi host - they are just unique per hctx. As such, the
HBA LLDD would have to generate this tag internally, which has a certain
performance overhead.
However another problem is that blk-mq assumes the host may accept
(Scsi_host.can_queue * #hw queue) commands. In commit 6eb045e092ef ("scsi:
core: avoid host-wide host_busy counter for scsi_mq"), the Scsi host busy
counter was removed, which would stop the LLDD being sent more than
.can_queue commands; however, it should still be ensured that the block
layer does not issue more than .can_queue commands to the Scsi host.
To solve this problem, introduce a shared sbitmap per blk_mq_tag_set,
which may be requested at init time.
New flag BLK_MQ_F_TAG_HCTX_SHARED should be set when requesting the
tagset to indicate whether the shared sbitmap should be used.
Even when BLK_MQ_F_TAG_HCTX_SHARED is set, a full set of tags and requests
are still allocated per hctx; the reason for this is that if tags and
requests were only allocated for a single hctx - like hctx0 - it may break
block drivers which expect a request be associated with a specific hctx,
i.e. not always hctx0. This will introduce extra memory usage.
This change is based on work originally from Ming Lei in [1] and from
Bart's suggestion in [2].
[0] https://lore.kernel.org/linux-block/alpine.DEB.2.21.1904051331270.1802@nanos.tec.linutronix.de/
[1] https://lore.kernel.org/linux-block/20190531022801.10003-1-ming.lei@redhat.com/
[2] https://lore.kernel.org/linux-block/ff77beff-5fd9-9f05-12b6-826922bace1f@huawei.com/T/#m3db0a602f095cbcbff27e9c884d6b4ae826144be
Signed-off-by: John Garry <john.garry@huawei.com>
Tested-by: Don Brace<don.brace@microsemi.com> #SCSI resv cmds patches used
Tested-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-08-19 15:20:24 +00:00
|
|
|
|
2014-12-22 21:04:42 +00:00
|
|
|
extern void blk_mq_tag_wakeup_all(struct blk_mq_tags *tags, bool);
|
2015-09-27 19:01:51 +00:00
|
|
|
void blk_mq_queue_tag_busy_iter(struct request_queue *q, busy_iter_fn *fn,
|
|
|
|
|
void *priv);
|
2020-05-29 13:53:14 +00:00
|
|
|
void blk_mq_all_tag_iter(struct blk_mq_tags *tags, busy_tag_iter_fn *fn,
|
|
|
|
|
void *priv);
|
blk-mq: new multi-queue block IO queueing mechanism
Linux currently has two models for block devices:
- The classic request_fn based approach, where drivers use struct
request units for IO. The block layer provides various helper
functionalities to let drivers share code, things like tag
management, timeout handling, queueing, etc.
- The "stacked" approach, where a driver squeezes in between the
block layer and IO submitter. Since this bypasses the IO stack,
driver generally have to manage everything themselves.
With drivers being written for new high IOPS devices, the classic
request_fn based driver doesn't work well enough. The design dates
back to when both SMP and high IOPS was rare. It has problems with
scaling to bigger machines, and runs into scaling issues even on
smaller machines when you have IOPS in the hundreds of thousands
per device.
The stacked approach is then most often selected as the model
for the driver. But this means that everybody has to re-invent
everything, and along with that we get all the problems again
that the shared approach solved.
This commit introduces blk-mq, block multi queue support. The
design is centered around per-cpu queues for queueing IO, which
then funnel down into x number of hardware submission queues.
We might have a 1:1 mapping between the two, or it might be
an N:M mapping. That all depends on what the hardware supports.
blk-mq provides various helper functions, which include:
- Scalable support for request tagging. Most devices need to
be able to uniquely identify a request both in the driver and
to the hardware. The tagging uses per-cpu caches for freed
tags, to enable cache hot reuse.
- Timeout handling without tracking request on a per-device
basis. Basically the driver should be able to get a notification,
if a request happens to fail.
- Optional support for non 1:1 mappings between issue and
submission queues. blk-mq can redirect IO completions to the
desired location.
- Support for per-request payloads. Drivers almost always need
to associate a request structure with some driver private
command structure. Drivers can tell blk-mq this at init time,
and then any request handed to the driver will have the
required size of memory associated with it.
- Support for merging of IO, and plugging. The stacked model
gets neither of these. Even for high IOPS devices, merging
sequential IO reduces per-command overhead and thus
increases bandwidth.
For now, this is provided as a potential 3rd queueing model, with
the hope being that, as it matures, it can replace both the classic
and stacked model. That would get us back to having just 1 real
model for block devices, leaving the stacked approach to dm/md
devices (as it was originally intended).
Contributions in this patch from the following people:
Shaohua Li <shli@fusionio.com>
Alexander Gordeev <agordeev@redhat.com>
Christoph Hellwig <hch@infradead.org>
Mike Christie <michaelc@cs.wisc.edu>
Matias Bjorling <m@bjorling.me>
Jeff Moyer <jmoyer@redhat.com>
Acked-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-10-24 08:20:05 +00:00
|
|
|
|
2016-09-17 14:38:44 +00:00
|
|
|
static inline struct sbq_wait_state *bt_wait_ptr(struct sbitmap_queue *bt,
|
|
|
|
|
struct blk_mq_hw_ctx *hctx)
|
|
|
|
|
{
|
|
|
|
|
if (!hctx)
|
|
|
|
|
return &bt->ws[0];
|
|
|
|
|
return sbq_wait_ptr(bt, &hctx->wait_index);
|
|
|
|
|
}
|
|
|
|
|
|
blk-mq: new multi-queue block IO queueing mechanism
Linux currently has two models for block devices:
- The classic request_fn based approach, where drivers use struct
request units for IO. The block layer provides various helper
functionalities to let drivers share code, things like tag
management, timeout handling, queueing, etc.
- The "stacked" approach, where a driver squeezes in between the
block layer and IO submitter. Since this bypasses the IO stack,
driver generally have to manage everything themselves.
With drivers being written for new high IOPS devices, the classic
request_fn based driver doesn't work well enough. The design dates
back to when both SMP and high IOPS was rare. It has problems with
scaling to bigger machines, and runs into scaling issues even on
smaller machines when you have IOPS in the hundreds of thousands
per device.
The stacked approach is then most often selected as the model
for the driver. But this means that everybody has to re-invent
everything, and along with that we get all the problems again
that the shared approach solved.
This commit introduces blk-mq, block multi queue support. The
design is centered around per-cpu queues for queueing IO, which
then funnel down into x number of hardware submission queues.
We might have a 1:1 mapping between the two, or it might be
an N:M mapping. That all depends on what the hardware supports.
blk-mq provides various helper functions, which include:
- Scalable support for request tagging. Most devices need to
be able to uniquely identify a request both in the driver and
to the hardware. The tagging uses per-cpu caches for freed
tags, to enable cache hot reuse.
- Timeout handling without tracking request on a per-device
basis. Basically the driver should be able to get a notification,
if a request happens to fail.
- Optional support for non 1:1 mappings between issue and
submission queues. blk-mq can redirect IO completions to the
desired location.
- Support for per-request payloads. Drivers almost always need
to associate a request structure with some driver private
command structure. Drivers can tell blk-mq this at init time,
and then any request handed to the driver will have the
required size of memory associated with it.
- Support for merging of IO, and plugging. The stacked model
gets neither of these. Even for high IOPS devices, merging
sequential IO reduces per-command overhead and thus
increases bandwidth.
For now, this is provided as a potential 3rd queueing model, with
the hope being that, as it matures, it can replace both the classic
and stacked model. That would get us back to having just 1 real
model for block devices, leaving the stacked approach to dm/md
devices (as it was originally intended).
Contributions in this patch from the following people:
Shaohua Li <shli@fusionio.com>
Alexander Gordeev <agordeev@redhat.com>
Christoph Hellwig <hch@infradead.org>
Mike Christie <michaelc@cs.wisc.edu>
Matias Bjorling <m@bjorling.me>
Jeff Moyer <jmoyer@redhat.com>
Acked-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-10-24 08:20:05 +00:00
|
|
|
enum {
|
2020-05-29 13:53:11 +00:00
|
|
|
BLK_MQ_NO_TAG = -1U,
|
2017-10-01 07:26:21 +00:00
|
|
|
BLK_MQ_TAG_MIN = 1,
|
2020-05-29 13:53:11 +00:00
|
|
|
BLK_MQ_TAG_MAX = BLK_MQ_NO_TAG - 1,
|
blk-mq: new multi-queue block IO queueing mechanism
Linux currently has two models for block devices:
- The classic request_fn based approach, where drivers use struct
request units for IO. The block layer provides various helper
functionalities to let drivers share code, things like tag
management, timeout handling, queueing, etc.
- The "stacked" approach, where a driver squeezes in between the
block layer and IO submitter. Since this bypasses the IO stack,
driver generally have to manage everything themselves.
With drivers being written for new high IOPS devices, the classic
request_fn based driver doesn't work well enough. The design dates
back to when both SMP and high IOPS was rare. It has problems with
scaling to bigger machines, and runs into scaling issues even on
smaller machines when you have IOPS in the hundreds of thousands
per device.
The stacked approach is then most often selected as the model
for the driver. But this means that everybody has to re-invent
everything, and along with that we get all the problems again
that the shared approach solved.
This commit introduces blk-mq, block multi queue support. The
design is centered around per-cpu queues for queueing IO, which
then funnel down into x number of hardware submission queues.
We might have a 1:1 mapping between the two, or it might be
an N:M mapping. That all depends on what the hardware supports.
blk-mq provides various helper functions, which include:
- Scalable support for request tagging. Most devices need to
be able to uniquely identify a request both in the driver and
to the hardware. The tagging uses per-cpu caches for freed
tags, to enable cache hot reuse.
- Timeout handling without tracking request on a per-device
basis. Basically the driver should be able to get a notification,
if a request happens to fail.
- Optional support for non 1:1 mappings between issue and
submission queues. blk-mq can redirect IO completions to the
desired location.
- Support for per-request payloads. Drivers almost always need
to associate a request structure with some driver private
command structure. Drivers can tell blk-mq this at init time,
and then any request handed to the driver will have the
required size of memory associated with it.
- Support for merging of IO, and plugging. The stacked model
gets neither of these. Even for high IOPS devices, merging
sequential IO reduces per-command overhead and thus
increases bandwidth.
For now, this is provided as a potential 3rd queueing model, with
the hope being that, as it matures, it can replace both the classic
and stacked model. That would get us back to having just 1 real
model for block devices, leaving the stacked approach to dm/md
devices (as it was originally intended).
Contributions in this patch from the following people:
Shaohua Li <shli@fusionio.com>
Alexander Gordeev <agordeev@redhat.com>
Christoph Hellwig <hch@infradead.org>
Mike Christie <michaelc@cs.wisc.edu>
Matias Bjorling <m@bjorling.me>
Jeff Moyer <jmoyer@redhat.com>
Acked-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-10-24 08:20:05 +00:00
|
|
|
};
|
|
|
|
|
|
2014-05-13 21:10:52 +00:00
|
|
|
extern bool __blk_mq_tag_busy(struct blk_mq_hw_ctx *);
|
|
|
|
|
extern void __blk_mq_tag_idle(struct blk_mq_hw_ctx *);
|
|
|
|
|
|
|
|
|
|
static inline bool blk_mq_tag_busy(struct blk_mq_hw_ctx *hctx)
|
|
|
|
|
{
|
2020-08-19 15:20:19 +00:00
|
|
|
if (!(hctx->flags & BLK_MQ_F_TAG_QUEUE_SHARED))
|
2014-05-13 21:10:52 +00:00
|
|
|
return false;
|
|
|
|
|
|
|
|
|
|
return __blk_mq_tag_busy(hctx);
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static inline void blk_mq_tag_idle(struct blk_mq_hw_ctx *hctx)
|
|
|
|
|
{
|
2020-08-19 15:20:19 +00:00
|
|
|
if (!(hctx->flags & BLK_MQ_F_TAG_QUEUE_SHARED))
|
2014-05-13 21:10:52 +00:00
|
|
|
return;
|
|
|
|
|
|
|
|
|
|
__blk_mq_tag_idle(hctx);
|
|
|
|
|
}
|
|
|
|
|
|
2017-02-27 17:04:39 +00:00
|
|
|
static inline bool blk_mq_tag_is_reserved(struct blk_mq_tags *tags,
|
|
|
|
|
unsigned int tag)
|
|
|
|
|
{
|
|
|
|
|
return tag < tags->nr_reserved_tags;
|
|
|
|
|
}
|
|
|
|
|
|
blk-mq: new multi-queue block IO queueing mechanism
Linux currently has two models for block devices:
- The classic request_fn based approach, where drivers use struct
request units for IO. The block layer provides various helper
functionalities to let drivers share code, things like tag
management, timeout handling, queueing, etc.
- The "stacked" approach, where a driver squeezes in between the
block layer and IO submitter. Since this bypasses the IO stack,
driver generally have to manage everything themselves.
With drivers being written for new high IOPS devices, the classic
request_fn based driver doesn't work well enough. The design dates
back to when both SMP and high IOPS was rare. It has problems with
scaling to bigger machines, and runs into scaling issues even on
smaller machines when you have IOPS in the hundreds of thousands
per device.
The stacked approach is then most often selected as the model
for the driver. But this means that everybody has to re-invent
everything, and along with that we get all the problems again
that the shared approach solved.
This commit introduces blk-mq, block multi queue support. The
design is centered around per-cpu queues for queueing IO, which
then funnel down into x number of hardware submission queues.
We might have a 1:1 mapping between the two, or it might be
an N:M mapping. That all depends on what the hardware supports.
blk-mq provides various helper functions, which include:
- Scalable support for request tagging. Most devices need to
be able to uniquely identify a request both in the driver and
to the hardware. The tagging uses per-cpu caches for freed
tags, to enable cache hot reuse.
- Timeout handling without tracking request on a per-device
basis. Basically the driver should be able to get a notification,
if a request happens to fail.
- Optional support for non 1:1 mappings between issue and
submission queues. blk-mq can redirect IO completions to the
desired location.
- Support for per-request payloads. Drivers almost always need
to associate a request structure with some driver private
command structure. Drivers can tell blk-mq this at init time,
and then any request handed to the driver will have the
required size of memory associated with it.
- Support for merging of IO, and plugging. The stacked model
gets neither of these. Even for high IOPS devices, merging
sequential IO reduces per-command overhead and thus
increases bandwidth.
For now, this is provided as a potential 3rd queueing model, with
the hope being that, as it matures, it can replace both the classic
and stacked model. That would get us back to having just 1 real
model for block devices, leaving the stacked approach to dm/md
devices (as it was originally intended).
Contributions in this patch from the following people:
Shaohua Li <shli@fusionio.com>
Alexander Gordeev <agordeev@redhat.com>
Christoph Hellwig <hch@infradead.org>
Mike Christie <michaelc@cs.wisc.edu>
Matias Bjorling <m@bjorling.me>
Jeff Moyer <jmoyer@redhat.com>
Acked-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-10-24 08:20:05 +00:00
|
|
|
#endif
|
