2020-06-12 14:47:13 +00:00
|
|
|
// SPDX-License-Identifier: GPL-2.0+
|
|
|
|
|
/*
|
|
|
|
|
* IMI RDACM20 GMSL Camera Driver
|
|
|
|
|
*
|
|
|
|
|
* Copyright (C) 2017-2020 Jacopo Mondi
|
|
|
|
|
* Copyright (C) 2017-2020 Kieran Bingham
|
|
|
|
|
* Copyright (C) 2017-2019 Laurent Pinchart
|
|
|
|
|
* Copyright (C) 2017-2019 Niklas Söderlund
|
|
|
|
|
* Copyright (C) 2016 Renesas Electronics Corporation
|
|
|
|
|
* Copyright (C) 2015 Cogent Embedded, Inc.
|
|
|
|
|
*/
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* The camera is made of an Omnivision OV10635 sensor connected to a Maxim
|
|
|
|
|
* MAX9271 GMSL serializer.
|
|
|
|
|
*/
|
|
|
|
|
|
|
|
|
|
#include <linux/delay.h>
|
|
|
|
|
#include <linux/fwnode.h>
|
|
|
|
|
#include <linux/init.h>
|
|
|
|
|
#include <linux/i2c.h>
|
|
|
|
|
#include <linux/module.h>
|
|
|
|
|
#include <linux/slab.h>
|
|
|
|
|
#include <linux/videodev2.h>
|
|
|
|
|
|
|
|
|
|
#include <media/v4l2-async.h>
|
|
|
|
|
#include <media/v4l2-ctrls.h>
|
|
|
|
|
#include <media/v4l2-subdev.h>
|
|
|
|
|
|
|
|
|
|
#include "max9271.h"
|
|
|
|
|
|
|
|
|
|
#define OV10635_I2C_ADDRESS 0x30
|
|
|
|
|
|
|
|
|
|
#define OV10635_SOFTWARE_RESET 0x0103
|
|
|
|
|
#define OV10635_PID 0x300a
|
|
|
|
|
#define OV10635_VER 0x300b
|
|
|
|
|
#define OV10635_SC_CMMN_SCCB_ID 0x300c
|
|
|
|
|
#define OV10635_SC_CMMN_SCCB_ID_SELECT BIT(0)
|
|
|
|
|
#define OV10635_VERSION 0xa635
|
|
|
|
|
|
|
|
|
|
#define OV10635_WIDTH 1280
|
|
|
|
|
#define OV10635_HEIGHT 800
|
|
|
|
|
|
|
|
|
|
/* VTS = PCLK / FPS / HTS / 2 (= 88MHz / 1572 / 30 / 2) */
|
|
|
|
|
#define OV10635_HTS 1572
|
|
|
|
|
/* FPS = 29,9998 */
|
|
|
|
|
#define OV10635_VTS 933
|
|
|
|
|
|
|
|
|
|
/*
|
2022-03-16 21:09:16 +00:00
|
|
|
* As the drivers supports a single MEDIA_BUS_FMT_UYVY8_1X16 format we
|
2020-06-12 14:47:13 +00:00
|
|
|
* can harcode the pixel rate.
|
|
|
|
|
*
|
|
|
|
|
* PCLK is fed through the system clock, programmed @88MHz.
|
2022-03-16 21:09:16 +00:00
|
|
|
* MEDIA_BUS_FMT_UYVY8_1X16 format = 2 samples per pixel.
|
2020-06-12 14:47:13 +00:00
|
|
|
*
|
|
|
|
|
* Pixelrate = PCLK / 2
|
|
|
|
|
* FPS = (OV10635_VTS * OV10635_HTS) / PixelRate
|
|
|
|
|
* = 29,9998
|
|
|
|
|
*/
|
|
|
|
|
#define OV10635_PIXEL_RATE (44000000)
|
|
|
|
|
|
|
|
|
|
static const struct ov10635_reg {
|
|
|
|
|
u16 reg;
|
|
|
|
|
u8 val;
|
|
|
|
|
} ov10635_regs_wizard[] = {
|
|
|
|
|
{ 0x301b, 0xff }, { 0x301c, 0xff }, { 0x301a, 0xff }, { 0x3011, 0x42 },
|
|
|
|
|
{ 0x6900, 0x0c }, { 0x6901, 0x19 }, { 0x3503, 0x10 }, { 0x3025, 0x03 },
|
|
|
|
|
{ 0x3003, 0x16 }, { 0x3004, 0x30 }, { 0x3005, 0x40 }, { 0x3006, 0x91 },
|
|
|
|
|
{ 0x3600, 0x74 }, { 0x3601, 0x2b }, { 0x3612, 0x00 }, { 0x3611, 0x67 },
|
|
|
|
|
{ 0x3633, 0xca }, { 0x3602, 0xaf }, { 0x3603, 0x04 }, { 0x3630, 0x28 },
|
|
|
|
|
{ 0x3631, 0x16 }, { 0x3714, 0x10 }, { 0x371d, 0x01 }, { 0x4300, 0x3a },
|
|
|
|
|
{ 0x3007, 0x01 }, { 0x3024, 0x03 }, { 0x3020, 0x0a }, { 0x3702, 0x0d },
|
|
|
|
|
{ 0x3703, 0x20 }, { 0x3704, 0x15 }, { 0x3709, 0xa8 }, { 0x370c, 0xc7 },
|
|
|
|
|
{ 0x370d, 0x80 }, { 0x3712, 0x00 }, { 0x3713, 0x20 }, { 0x3715, 0x04 },
|
|
|
|
|
{ 0x381d, 0x40 }, { 0x381c, 0x00 }, { 0x3822, 0x50 }, { 0x3824, 0x10 },
|
|
|
|
|
{ 0x3815, 0x8c }, { 0x3804, 0x05 }, { 0x3805, 0x1f }, { 0x3800, 0x00 },
|
|
|
|
|
{ 0x3801, 0x00 }, { 0x3806, 0x03 }, { 0x3807, 0x28 }, { 0x3802, 0x00 },
|
|
|
|
|
{ 0x3803, 0x07 }, { 0x3808, 0x05 }, { 0x3809, 0x00 }, { 0x380a, 0x03 },
|
|
|
|
|
{ 0x380b, 0x20 }, { 0x380c, OV10635_HTS >> 8 },
|
|
|
|
|
{ 0x380d, OV10635_HTS & 0xff }, { 0x380e, OV10635_VTS >> 8 },
|
|
|
|
|
{ 0x380f, OV10635_VTS & 0xff }, { 0x3813, 0x02 }, { 0x3811, 0x08 },
|
|
|
|
|
{ 0x381f, 0x0c }, { 0x3819, 0x04 }, { 0x3804, 0x01 }, { 0x3805, 0x00 },
|
|
|
|
|
{ 0x3828, 0x03 }, { 0x3829, 0x10 }, { 0x382a, 0x10 }, { 0x3621, 0x63 },
|
|
|
|
|
{ 0x5005, 0x08 }, { 0x56d5, 0x00 }, { 0x56d6, 0x80 }, { 0x56d7, 0x00 },
|
|
|
|
|
{ 0x56d8, 0x00 }, { 0x56d9, 0x00 }, { 0x56da, 0x80 }, { 0x56db, 0x00 },
|
|
|
|
|
{ 0x56dc, 0x00 }, { 0x56e8, 0x00 }, { 0x56e9, 0x7f }, { 0x56ea, 0x00 },
|
|
|
|
|
{ 0x56eb, 0x7f }, { 0x5100, 0x00 }, { 0x5101, 0x80 }, { 0x5102, 0x00 },
|
|
|
|
|
{ 0x5103, 0x80 }, { 0x5104, 0x00 }, { 0x5105, 0x80 }, { 0x5106, 0x00 },
|
|
|
|
|
{ 0x5107, 0x80 }, { 0x5108, 0x00 }, { 0x5109, 0x00 }, { 0x510a, 0x00 },
|
|
|
|
|
{ 0x510b, 0x00 }, { 0x510c, 0x00 }, { 0x510d, 0x00 }, { 0x510e, 0x00 },
|
|
|
|
|
{ 0x510f, 0x00 }, { 0x5110, 0x00 }, { 0x5111, 0x80 }, { 0x5112, 0x00 },
|
|
|
|
|
{ 0x5113, 0x80 }, { 0x5114, 0x00 }, { 0x5115, 0x80 }, { 0x5116, 0x00 },
|
|
|
|
|
{ 0x5117, 0x80 }, { 0x5118, 0x00 }, { 0x5119, 0x00 }, { 0x511a, 0x00 },
|
|
|
|
|
{ 0x511b, 0x00 }, { 0x511c, 0x00 }, { 0x511d, 0x00 }, { 0x511e, 0x00 },
|
|
|
|
|
{ 0x511f, 0x00 }, { 0x56d0, 0x00 }, { 0x5006, 0x04 }, { 0x5608, 0x05 },
|
|
|
|
|
{ 0x52d7, 0x06 }, { 0x528d, 0x08 }, { 0x5293, 0x12 }, { 0x52d3, 0x12 },
|
|
|
|
|
{ 0x5288, 0x06 }, { 0x5289, 0x20 }, { 0x52c8, 0x06 }, { 0x52c9, 0x20 },
|
|
|
|
|
{ 0x52cd, 0x04 }, { 0x5381, 0x00 }, { 0x5382, 0xff }, { 0x5589, 0x76 },
|
|
|
|
|
{ 0x558a, 0x47 }, { 0x558b, 0xef }, { 0x558c, 0xc9 }, { 0x558d, 0x49 },
|
|
|
|
|
{ 0x558e, 0x30 }, { 0x558f, 0x67 }, { 0x5590, 0x3f }, { 0x5591, 0xf0 },
|
|
|
|
|
{ 0x5592, 0x10 }, { 0x55a2, 0x6d }, { 0x55a3, 0x55 }, { 0x55a4, 0xc3 },
|
|
|
|
|
{ 0x55a5, 0xb5 }, { 0x55a6, 0x43 }, { 0x55a7, 0x38 }, { 0x55a8, 0x5f },
|
|
|
|
|
{ 0x55a9, 0x4b }, { 0x55aa, 0xf0 }, { 0x55ab, 0x10 }, { 0x5581, 0x52 },
|
|
|
|
|
{ 0x5300, 0x01 }, { 0x5301, 0x00 }, { 0x5302, 0x00 }, { 0x5303, 0x0e },
|
|
|
|
|
{ 0x5304, 0x00 }, { 0x5305, 0x0e }, { 0x5306, 0x00 }, { 0x5307, 0x36 },
|
|
|
|
|
{ 0x5308, 0x00 }, { 0x5309, 0xd9 }, { 0x530a, 0x00 }, { 0x530b, 0x0f },
|
|
|
|
|
{ 0x530c, 0x00 }, { 0x530d, 0x2c }, { 0x530e, 0x00 }, { 0x530f, 0x59 },
|
|
|
|
|
{ 0x5310, 0x00 }, { 0x5311, 0x7b }, { 0x5312, 0x00 }, { 0x5313, 0x22 },
|
|
|
|
|
{ 0x5314, 0x00 }, { 0x5315, 0xd5 }, { 0x5316, 0x00 }, { 0x5317, 0x13 },
|
|
|
|
|
{ 0x5318, 0x00 }, { 0x5319, 0x18 }, { 0x531a, 0x00 }, { 0x531b, 0x26 },
|
|
|
|
|
{ 0x531c, 0x00 }, { 0x531d, 0xdc }, { 0x531e, 0x00 }, { 0x531f, 0x02 },
|
|
|
|
|
{ 0x5320, 0x00 }, { 0x5321, 0x24 }, { 0x5322, 0x00 }, { 0x5323, 0x56 },
|
|
|
|
|
{ 0x5324, 0x00 }, { 0x5325, 0x85 }, { 0x5326, 0x00 }, { 0x5327, 0x20 },
|
|
|
|
|
{ 0x5609, 0x01 }, { 0x560a, 0x40 }, { 0x560b, 0x01 }, { 0x560c, 0x40 },
|
|
|
|
|
{ 0x560d, 0x00 }, { 0x560e, 0xfa }, { 0x560f, 0x00 }, { 0x5610, 0xfa },
|
|
|
|
|
{ 0x5611, 0x02 }, { 0x5612, 0x80 }, { 0x5613, 0x02 }, { 0x5614, 0x80 },
|
|
|
|
|
{ 0x5615, 0x01 }, { 0x5616, 0x2c }, { 0x5617, 0x01 }, { 0x5618, 0x2c },
|
|
|
|
|
{ 0x563b, 0x01 }, { 0x563c, 0x01 }, { 0x563d, 0x01 }, { 0x563e, 0x01 },
|
|
|
|
|
{ 0x563f, 0x03 }, { 0x5640, 0x03 }, { 0x5641, 0x03 }, { 0x5642, 0x05 },
|
|
|
|
|
{ 0x5643, 0x09 }, { 0x5644, 0x05 }, { 0x5645, 0x05 }, { 0x5646, 0x05 },
|
|
|
|
|
{ 0x5647, 0x05 }, { 0x5651, 0x00 }, { 0x5652, 0x80 }, { 0x521a, 0x01 },
|
|
|
|
|
{ 0x521b, 0x03 }, { 0x521c, 0x06 }, { 0x521d, 0x0a }, { 0x521e, 0x0e },
|
|
|
|
|
{ 0x521f, 0x12 }, { 0x5220, 0x16 }, { 0x5223, 0x02 }, { 0x5225, 0x04 },
|
|
|
|
|
{ 0x5227, 0x08 }, { 0x5229, 0x0c }, { 0x522b, 0x12 }, { 0x522d, 0x18 },
|
|
|
|
|
{ 0x522f, 0x1e }, { 0x5241, 0x04 }, { 0x5242, 0x01 }, { 0x5243, 0x03 },
|
|
|
|
|
{ 0x5244, 0x06 }, { 0x5245, 0x0a }, { 0x5246, 0x0e }, { 0x5247, 0x12 },
|
|
|
|
|
{ 0x5248, 0x16 }, { 0x524a, 0x03 }, { 0x524c, 0x04 }, { 0x524e, 0x08 },
|
|
|
|
|
{ 0x5250, 0x0c }, { 0x5252, 0x12 }, { 0x5254, 0x18 }, { 0x5256, 0x1e },
|
|
|
|
|
/* fifo_line_length = 2*hts */
|
|
|
|
|
{ 0x4606, (2 * OV10635_HTS) >> 8 }, { 0x4607, (2 * OV10635_HTS) & 0xff },
|
|
|
|
|
/* fifo_hsync_start = 2*(hts - xres) */
|
|
|
|
|
{ 0x460a, (2 * (OV10635_HTS - OV10635_WIDTH)) >> 8 },
|
|
|
|
|
{ 0x460b, (2 * (OV10635_HTS - OV10635_WIDTH)) & 0xff },
|
|
|
|
|
{ 0x460c, 0x00 }, { 0x4620, 0x0e },
|
|
|
|
|
/* BT601: 0x08 is also acceptable as HS/VS mode */
|
|
|
|
|
{ 0x4700, 0x04 }, { 0x4701, 0x00 }, { 0x4702, 0x01 }, { 0x4004, 0x04 },
|
|
|
|
|
{ 0x4005, 0x18 }, { 0x4001, 0x06 }, { 0x4050, 0x22 }, { 0x4051, 0x24 },
|
|
|
|
|
{ 0x4052, 0x02 }, { 0x4057, 0x9c }, { 0x405a, 0x00 }, { 0x4202, 0x02 },
|
|
|
|
|
{ 0x3023, 0x10 }, { 0x0100, 0x01 }, { 0x0100, 0x01 }, { 0x6f10, 0x07 },
|
|
|
|
|
{ 0x6f11, 0x82 }, { 0x6f12, 0x04 }, { 0x6f13, 0x00 }, { 0xd000, 0x19 },
|
|
|
|
|
{ 0xd001, 0xa0 }, { 0xd002, 0x00 }, { 0xd003, 0x01 }, { 0xd004, 0xa9 },
|
|
|
|
|
{ 0xd005, 0xad }, { 0xd006, 0x10 }, { 0xd007, 0x40 }, { 0xd008, 0x44 },
|
|
|
|
|
{ 0xd009, 0x00 }, { 0xd00a, 0x68 }, { 0xd00b, 0x00 }, { 0xd00c, 0x15 },
|
|
|
|
|
{ 0xd00d, 0x00 }, { 0xd00e, 0x00 }, { 0xd00f, 0x00 }, { 0xd040, 0x9c },
|
|
|
|
|
{ 0xd041, 0x21 }, { 0xd042, 0xff }, { 0xd043, 0xf8 }, { 0xd044, 0xd4 },
|
|
|
|
|
{ 0xd045, 0x01 }, { 0xd046, 0x48 }, { 0xd047, 0x00 }, { 0xd048, 0xd4 },
|
|
|
|
|
{ 0xd049, 0x01 }, { 0xd04a, 0x50 }, { 0xd04b, 0x04 }, { 0xd04c, 0x18 },
|
|
|
|
|
{ 0xd04d, 0x60 }, { 0xd04e, 0x00 }, { 0xd04f, 0x01 }, { 0xd050, 0xa8 },
|
|
|
|
|
{ 0xd051, 0x63 }, { 0xd052, 0x02 }, { 0xd053, 0xa4 }, { 0xd054, 0x85 },
|
|
|
|
|
{ 0xd055, 0x43 }, { 0xd056, 0x00 }, { 0xd057, 0x00 }, { 0xd058, 0x18 },
|
|
|
|
|
{ 0xd059, 0x60 }, { 0xd05a, 0x00 }, { 0xd05b, 0x01 }, { 0xd05c, 0xa8 },
|
|
|
|
|
{ 0xd05d, 0x63 }, { 0xd05e, 0x03 }, { 0xd05f, 0xf0 }, { 0xd060, 0x98 },
|
|
|
|
|
{ 0xd061, 0xa3 }, { 0xd062, 0x00 }, { 0xd063, 0x00 }, { 0xd064, 0x8c },
|
|
|
|
|
{ 0xd065, 0x6a }, { 0xd066, 0x00 }, { 0xd067, 0x6e }, { 0xd068, 0xe5 },
|
|
|
|
|
{ 0xd069, 0x85 }, { 0xd06a, 0x18 }, { 0xd06b, 0x00 }, { 0xd06c, 0x10 },
|
|
|
|
|
{ 0xd06d, 0x00 }, { 0xd06e, 0x00 }, { 0xd06f, 0x10 }, { 0xd070, 0x9c },
|
|
|
|
|
{ 0xd071, 0x80 }, { 0xd072, 0x00 }, { 0xd073, 0x03 }, { 0xd074, 0x18 },
|
|
|
|
|
{ 0xd075, 0x60 }, { 0xd076, 0x00 }, { 0xd077, 0x01 }, { 0xd078, 0xa8 },
|
|
|
|
|
{ 0xd079, 0x63 }, { 0xd07a, 0x07 }, { 0xd07b, 0x80 }, { 0xd07c, 0x07 },
|
|
|
|
|
{ 0xd07d, 0xff }, { 0xd07e, 0xf9 }, { 0xd07f, 0x03 }, { 0xd080, 0x8c },
|
|
|
|
|
{ 0xd081, 0x63 }, { 0xd082, 0x00 }, { 0xd083, 0x00 }, { 0xd084, 0xa5 },
|
|
|
|
|
{ 0xd085, 0x6b }, { 0xd086, 0x00 }, { 0xd087, 0xff }, { 0xd088, 0x18 },
|
|
|
|
|
{ 0xd089, 0x80 }, { 0xd08a, 0x00 }, { 0xd08b, 0x01 }, { 0xd08c, 0xa8 },
|
|
|
|
|
{ 0xd08d, 0x84 }, { 0xd08e, 0x01 }, { 0xd08f, 0x04 }, { 0xd090, 0xe1 },
|
|
|
|
|
{ 0xd091, 0x6b }, { 0xd092, 0x58 }, { 0xd093, 0x00 }, { 0xd094, 0x94 },
|
|
|
|
|
{ 0xd095, 0x6a }, { 0xd096, 0x00 }, { 0xd097, 0x70 }, { 0xd098, 0xe1 },
|
|
|
|
|
{ 0xd099, 0x6b }, { 0xd09a, 0x20 }, { 0xd09b, 0x00 }, { 0xd09c, 0x95 },
|
|
|
|
|
{ 0xd09d, 0x6b }, { 0xd09e, 0x00 }, { 0xd09f, 0x00 }, { 0xd0a0, 0xe4 },
|
|
|
|
|
{ 0xd0a1, 0x8b }, { 0xd0a2, 0x18 }, { 0xd0a3, 0x00 }, { 0xd0a4, 0x0c },
|
|
|
|
|
{ 0xd0a5, 0x00 }, { 0xd0a6, 0x00 }, { 0xd0a7, 0x23 }, { 0xd0a8, 0x15 },
|
|
|
|
|
{ 0xd0a9, 0x00 }, { 0xd0aa, 0x00 }, { 0xd0ab, 0x00 }, { 0xd0ac, 0x18 },
|
|
|
|
|
{ 0xd0ad, 0x60 }, { 0xd0ae, 0x80 }, { 0xd0af, 0x06 }, { 0xd0b0, 0xa8 },
|
|
|
|
|
{ 0xd0b1, 0x83 }, { 0xd0b2, 0x40 }, { 0xd0b3, 0x08 }, { 0xd0b4, 0xa8 },
|
|
|
|
|
{ 0xd0b5, 0xe3 }, { 0xd0b6, 0x38 }, { 0xd0b7, 0x2a }, { 0xd0b8, 0xa8 },
|
|
|
|
|
{ 0xd0b9, 0xc3 }, { 0xd0ba, 0x40 }, { 0xd0bb, 0x09 }, { 0xd0bc, 0xa8 },
|
|
|
|
|
{ 0xd0bd, 0xa3 }, { 0xd0be, 0x38 }, { 0xd0bf, 0x29 }, { 0xd0c0, 0x8c },
|
|
|
|
|
{ 0xd0c1, 0x65 }, { 0xd0c2, 0x00 }, { 0xd0c3, 0x00 }, { 0xd0c4, 0xd8 },
|
|
|
|
|
{ 0xd0c5, 0x04 }, { 0xd0c6, 0x18 }, { 0xd0c7, 0x00 }, { 0xd0c8, 0x8c },
|
|
|
|
|
{ 0xd0c9, 0x67 }, { 0xd0ca, 0x00 }, { 0xd0cb, 0x00 }, { 0xd0cc, 0xd8 },
|
|
|
|
|
{ 0xd0cd, 0x06 }, { 0xd0ce, 0x18 }, { 0xd0cf, 0x00 }, { 0xd0d0, 0x18 },
|
|
|
|
|
{ 0xd0d1, 0x60 }, { 0xd0d2, 0x80 }, { 0xd0d3, 0x06 }, { 0xd0d4, 0xa8 },
|
|
|
|
|
{ 0xd0d5, 0xe3 }, { 0xd0d6, 0x67 }, { 0xd0d7, 0x02 }, { 0xd0d8, 0xa9 },
|
|
|
|
|
{ 0xd0d9, 0x03 }, { 0xd0da, 0x67 }, { 0xd0db, 0x03 }, { 0xd0dc, 0xa8 },
|
|
|
|
|
{ 0xd0dd, 0xc3 }, { 0xd0de, 0x3d }, { 0xd0df, 0x05 }, { 0xd0e0, 0x8c },
|
|
|
|
|
{ 0xd0e1, 0x66 }, { 0xd0e2, 0x00 }, { 0xd0e3, 0x00 }, { 0xd0e4, 0xb8 },
|
|
|
|
|
{ 0xd0e5, 0x63 }, { 0xd0e6, 0x00 }, { 0xd0e7, 0x18 }, { 0xd0e8, 0xb8 },
|
|
|
|
|
{ 0xd0e9, 0x63 }, { 0xd0ea, 0x00 }, { 0xd0eb, 0x98 }, { 0xd0ec, 0xbc },
|
|
|
|
|
{ 0xd0ed, 0x03 }, { 0xd0ee, 0x00 }, { 0xd0ef, 0x00 }, { 0xd0f0, 0x10 },
|
|
|
|
|
{ 0xd0f1, 0x00 }, { 0xd0f2, 0x00 }, { 0xd0f3, 0x16 }, { 0xd0f4, 0xb8 },
|
|
|
|
|
{ 0xd0f5, 0x83 }, { 0xd0f6, 0x00 }, { 0xd0f7, 0x19 }, { 0xd0f8, 0x8c },
|
|
|
|
|
{ 0xd0f9, 0x67 }, { 0xd0fa, 0x00 }, { 0xd0fb, 0x00 }, { 0xd0fc, 0xb8 },
|
|
|
|
|
{ 0xd0fd, 0xa4 }, { 0xd0fe, 0x00 }, { 0xd0ff, 0x98 }, { 0xd100, 0xb8 },
|
|
|
|
|
{ 0xd101, 0x83 }, { 0xd102, 0x00 }, { 0xd103, 0x08 }, { 0xd104, 0x8c },
|
|
|
|
|
{ 0xd105, 0x68 }, { 0xd106, 0x00 }, { 0xd107, 0x00 }, { 0xd108, 0xe0 },
|
|
|
|
|
{ 0xd109, 0x63 }, { 0xd10a, 0x20 }, { 0xd10b, 0x04 }, { 0xd10c, 0xe0 },
|
|
|
|
|
{ 0xd10d, 0x65 }, { 0xd10e, 0x18 }, { 0xd10f, 0x00 }, { 0xd110, 0xa4 },
|
|
|
|
|
{ 0xd111, 0x83 }, { 0xd112, 0xff }, { 0xd113, 0xff }, { 0xd114, 0xb8 },
|
|
|
|
|
{ 0xd115, 0x64 }, { 0xd116, 0x00 }, { 0xd117, 0x48 }, { 0xd118, 0xd8 },
|
|
|
|
|
{ 0xd119, 0x07 }, { 0xd11a, 0x18 }, { 0xd11b, 0x00 }, { 0xd11c, 0xd8 },
|
|
|
|
|
{ 0xd11d, 0x08 }, { 0xd11e, 0x20 }, { 0xd11f, 0x00 }, { 0xd120, 0x9c },
|
|
|
|
|
{ 0xd121, 0x60 }, { 0xd122, 0x00 }, { 0xd123, 0x00 }, { 0xd124, 0xd8 },
|
|
|
|
|
{ 0xd125, 0x06 }, { 0xd126, 0x18 }, { 0xd127, 0x00 }, { 0xd128, 0x00 },
|
|
|
|
|
{ 0xd129, 0x00 }, { 0xd12a, 0x00 }, { 0xd12b, 0x08 }, { 0xd12c, 0x15 },
|
|
|
|
|
{ 0xd12d, 0x00 }, { 0xd12e, 0x00 }, { 0xd12f, 0x00 }, { 0xd130, 0x8c },
|
|
|
|
|
{ 0xd131, 0x6a }, { 0xd132, 0x00 }, { 0xd133, 0x76 }, { 0xd134, 0xbc },
|
|
|
|
|
{ 0xd135, 0x23 }, { 0xd136, 0x00 }, { 0xd137, 0x00 }, { 0xd138, 0x13 },
|
|
|
|
|
{ 0xd139, 0xff }, { 0xd13a, 0xff }, { 0xd13b, 0xe6 }, { 0xd13c, 0x18 },
|
|
|
|
|
{ 0xd13d, 0x60 }, { 0xd13e, 0x80 }, { 0xd13f, 0x06 }, { 0xd140, 0x03 },
|
|
|
|
|
{ 0xd141, 0xff }, { 0xd142, 0xff }, { 0xd143, 0xdd }, { 0xd144, 0xa8 },
|
|
|
|
|
{ 0xd145, 0x83 }, { 0xd146, 0x40 }, { 0xd147, 0x08 }, { 0xd148, 0x85 },
|
|
|
|
|
{ 0xd149, 0x21 }, { 0xd14a, 0x00 }, { 0xd14b, 0x00 }, { 0xd14c, 0x85 },
|
|
|
|
|
{ 0xd14d, 0x41 }, { 0xd14e, 0x00 }, { 0xd14f, 0x04 }, { 0xd150, 0x44 },
|
|
|
|
|
{ 0xd151, 0x00 }, { 0xd152, 0x48 }, { 0xd153, 0x00 }, { 0xd154, 0x9c },
|
|
|
|
|
{ 0xd155, 0x21 }, { 0xd156, 0x00 }, { 0xd157, 0x08 }, { 0x6f0e, 0x03 },
|
|
|
|
|
{ 0x6f0f, 0x00 }, { 0x460e, 0x08 }, { 0x460f, 0x01 }, { 0x4610, 0x00 },
|
|
|
|
|
{ 0x4611, 0x01 }, { 0x4612, 0x00 }, { 0x4613, 0x01 },
|
|
|
|
|
/* 8 bits */
|
|
|
|
|
{ 0x4605, 0x08 },
|
|
|
|
|
/* Swap data bits order [9:0] -> [0:9] */
|
|
|
|
|
{ 0x4709, 0x10 }, { 0x4608, 0x00 }, { 0x4609, 0x08 }, { 0x6804, 0x00 },
|
|
|
|
|
{ 0x6805, 0x06 }, { 0x6806, 0x00 }, { 0x5120, 0x00 }, { 0x3510, 0x00 },
|
|
|
|
|
{ 0x3504, 0x00 }, { 0x6800, 0x00 }, { 0x6f0d, 0x01 },
|
|
|
|
|
/* PCLK falling edge */
|
|
|
|
|
{ 0x4708, 0x01 }, { 0x5000, 0xff }, { 0x5001, 0xbf }, { 0x5002, 0x7e },
|
|
|
|
|
{ 0x503d, 0x00 }, { 0xc450, 0x01 }, { 0xc452, 0x04 }, { 0xc453, 0x00 },
|
|
|
|
|
{ 0xc454, 0x00 }, { 0xc455, 0x01 }, { 0xc456, 0x01 }, { 0xc457, 0x00 },
|
|
|
|
|
{ 0xc458, 0x00 }, { 0xc459, 0x00 }, { 0xc45b, 0x00 }, { 0xc45c, 0x01 },
|
|
|
|
|
{ 0xc45d, 0x00 }, { 0xc45e, 0x00 }, { 0xc45f, 0x00 }, { 0xc460, 0x00 },
|
|
|
|
|
{ 0xc461, 0x01 }, { 0xc462, 0x01 }, { 0xc464, 0x03 }, { 0xc465, 0x00 },
|
|
|
|
|
{ 0xc466, 0x8a }, { 0xc467, 0x00 }, { 0xc468, 0x86 }, { 0xc469, 0x00 },
|
|
|
|
|
{ 0xc46a, 0x40 }, { 0xc46b, 0x50 }, { 0xc46c, 0x30 }, { 0xc46d, 0x28 },
|
|
|
|
|
{ 0xc46e, 0x60 }, { 0xc46f, 0x40 }, { 0xc47c, 0x01 }, { 0xc47d, 0x38 },
|
|
|
|
|
{ 0xc47e, 0x00 }, { 0xc47f, 0x00 }, { 0xc480, 0x00 }, { 0xc481, 0xff },
|
|
|
|
|
{ 0xc482, 0x00 }, { 0xc483, 0x40 }, { 0xc484, 0x00 }, { 0xc485, 0x18 },
|
|
|
|
|
{ 0xc486, 0x00 }, { 0xc487, 0x18 },
|
|
|
|
|
{ 0xc488, (OV10635_VTS - 8) * 16 >> 8},
|
|
|
|
|
{ 0xc489, (OV10635_VTS - 8) * 16 & 0xff},
|
|
|
|
|
{ 0xc48a, (OV10635_VTS - 8) * 16 >> 8},
|
|
|
|
|
{ 0xc48b, (OV10635_VTS - 8) * 16 & 0xff}, { 0xc48c, 0x00 },
|
|
|
|
|
{ 0xc48d, 0x04 }, { 0xc48e, 0x00 }, { 0xc48f, 0x04 }, { 0xc490, 0x03 },
|
|
|
|
|
{ 0xc492, 0x20 }, { 0xc493, 0x08 }, { 0xc498, 0x02 }, { 0xc499, 0x00 },
|
|
|
|
|
{ 0xc49a, 0x02 }, { 0xc49b, 0x00 }, { 0xc49c, 0x02 }, { 0xc49d, 0x00 },
|
|
|
|
|
{ 0xc49e, 0x02 }, { 0xc49f, 0x60 }, { 0xc4a0, 0x03 }, { 0xc4a1, 0x00 },
|
|
|
|
|
{ 0xc4a2, 0x04 }, { 0xc4a3, 0x00 }, { 0xc4a4, 0x00 }, { 0xc4a5, 0x10 },
|
|
|
|
|
{ 0xc4a6, 0x00 }, { 0xc4a7, 0x40 }, { 0xc4a8, 0x00 }, { 0xc4a9, 0x80 },
|
|
|
|
|
{ 0xc4aa, 0x0d }, { 0xc4ab, 0x00 }, { 0xc4ac, 0x0f }, { 0xc4ad, 0xc0 },
|
|
|
|
|
{ 0xc4b4, 0x01 }, { 0xc4b5, 0x01 }, { 0xc4b6, 0x00 }, { 0xc4b7, 0x01 },
|
|
|
|
|
{ 0xc4b8, 0x00 }, { 0xc4b9, 0x01 }, { 0xc4ba, 0x01 }, { 0xc4bb, 0x00 },
|
|
|
|
|
{ 0xc4bc, 0x01 }, { 0xc4bd, 0x60 }, { 0xc4be, 0x02 }, { 0xc4bf, 0x33 },
|
|
|
|
|
{ 0xc4c8, 0x03 }, { 0xc4c9, 0xd0 }, { 0xc4ca, 0x0e }, { 0xc4cb, 0x00 },
|
|
|
|
|
{ 0xc4cc, 0x0e }, { 0xc4cd, 0x51 }, { 0xc4ce, 0x0e }, { 0xc4cf, 0x51 },
|
|
|
|
|
{ 0xc4d0, 0x04 }, { 0xc4d1, 0x80 }, { 0xc4e0, 0x04 }, { 0xc4e1, 0x02 },
|
|
|
|
|
{ 0xc4e2, 0x01 }, { 0xc4e4, 0x10 }, { 0xc4e5, 0x20 }, { 0xc4e6, 0x30 },
|
|
|
|
|
{ 0xc4e7, 0x40 }, { 0xc4e8, 0x50 }, { 0xc4e9, 0x60 }, { 0xc4ea, 0x70 },
|
|
|
|
|
{ 0xc4eb, 0x80 }, { 0xc4ec, 0x90 }, { 0xc4ed, 0xa0 }, { 0xc4ee, 0xb0 },
|
|
|
|
|
{ 0xc4ef, 0xc0 }, { 0xc4f0, 0xd0 }, { 0xc4f1, 0xe0 }, { 0xc4f2, 0xf0 },
|
|
|
|
|
{ 0xc4f3, 0x80 }, { 0xc4f4, 0x00 }, { 0xc4f5, 0x20 }, { 0xc4f6, 0x02 },
|
|
|
|
|
{ 0xc4f7, 0x00 }, { 0xc4f8, 0x00 }, { 0xc4f9, 0x00 }, { 0xc4fa, 0x00 },
|
|
|
|
|
{ 0xc4fb, 0x01 }, { 0xc4fc, 0x01 }, { 0xc4fd, 0x00 }, { 0xc4fe, 0x04 },
|
|
|
|
|
{ 0xc4ff, 0x02 }, { 0xc500, 0x48 }, { 0xc501, 0x74 }, { 0xc502, 0x58 },
|
|
|
|
|
{ 0xc503, 0x80 }, { 0xc504, 0x05 }, { 0xc505, 0x80 }, { 0xc506, 0x03 },
|
|
|
|
|
{ 0xc507, 0x80 }, { 0xc508, 0x01 }, { 0xc509, 0xc0 }, { 0xc50a, 0x01 },
|
|
|
|
|
{ 0xc50b, 0xa0 }, { 0xc50c, 0x01 }, { 0xc50d, 0x2c }, { 0xc50e, 0x01 },
|
|
|
|
|
{ 0xc50f, 0x0a }, { 0xc510, 0x00 }, { 0xc511, 0x00 }, { 0xc512, 0xe5 },
|
|
|
|
|
{ 0xc513, 0x14 }, { 0xc514, 0x04 }, { 0xc515, 0x00 }, { 0xc518, OV10635_VTS >> 8},
|
|
|
|
|
{ 0xc519, OV10635_VTS & 0xff}, { 0xc51a, OV10635_HTS >> 8},
|
|
|
|
|
{ 0xc51b, OV10635_HTS & 0xff}, { 0xc2e0, 0x00 }, { 0xc2e1, 0x51 },
|
|
|
|
|
{ 0xc2e2, 0x00 }, { 0xc2e3, 0xd6 }, { 0xc2e4, 0x01 }, { 0xc2e5, 0x5e },
|
|
|
|
|
{ 0xc2e9, 0x01 }, { 0xc2ea, 0x7a }, { 0xc2eb, 0x90 }, { 0xc2ed, 0x00 },
|
|
|
|
|
{ 0xc2ee, 0x7a }, { 0xc2ef, 0x64 }, { 0xc308, 0x00 }, { 0xc309, 0x00 },
|
|
|
|
|
{ 0xc30a, 0x00 }, { 0xc30c, 0x00 }, { 0xc30d, 0x01 }, { 0xc30e, 0x00 },
|
|
|
|
|
{ 0xc30f, 0x00 }, { 0xc310, 0x01 }, { 0xc311, 0x60 }, { 0xc312, 0xff },
|
|
|
|
|
{ 0xc313, 0x08 }, { 0xc314, 0x01 }, { 0xc315, 0x00 }, { 0xc316, 0xff },
|
|
|
|
|
{ 0xc317, 0x0b }, { 0xc318, 0x00 }, { 0xc319, 0x0c }, { 0xc31a, 0x00 },
|
|
|
|
|
{ 0xc31b, 0xe0 }, { 0xc31c, 0x00 }, { 0xc31d, 0x14 }, { 0xc31e, 0x00 },
|
|
|
|
|
{ 0xc31f, 0xc5 }, { 0xc320, 0xff }, { 0xc321, 0x4b }, { 0xc322, 0xff },
|
|
|
|
|
{ 0xc323, 0xf0 }, { 0xc324, 0xff }, { 0xc325, 0xe8 }, { 0xc326, 0x00 },
|
|
|
|
|
{ 0xc327, 0x46 }, { 0xc328, 0xff }, { 0xc329, 0xd2 }, { 0xc32a, 0xff },
|
|
|
|
|
{ 0xc32b, 0xe4 }, { 0xc32c, 0xff }, { 0xc32d, 0xbb }, { 0xc32e, 0x00 },
|
|
|
|
|
{ 0xc32f, 0x61 }, { 0xc330, 0xff }, { 0xc331, 0xf9 }, { 0xc332, 0x00 },
|
|
|
|
|
{ 0xc333, 0xd9 }, { 0xc334, 0x00 }, { 0xc335, 0x2e }, { 0xc336, 0x00 },
|
|
|
|
|
{ 0xc337, 0xb1 }, { 0xc338, 0xff }, { 0xc339, 0x64 }, { 0xc33a, 0xff },
|
|
|
|
|
{ 0xc33b, 0xeb }, { 0xc33c, 0xff }, { 0xc33d, 0xe8 }, { 0xc33e, 0x00 },
|
|
|
|
|
{ 0xc33f, 0x48 }, { 0xc340, 0xff }, { 0xc341, 0xd0 }, { 0xc342, 0xff },
|
|
|
|
|
{ 0xc343, 0xed }, { 0xc344, 0xff }, { 0xc345, 0xad }, { 0xc346, 0x00 },
|
|
|
|
|
{ 0xc347, 0x66 }, { 0xc348, 0x01 }, { 0xc349, 0x00 }, { 0x6700, 0x04 },
|
|
|
|
|
{ 0x6701, 0x7b }, { 0x6702, 0xfd }, { 0x6703, 0xf9 }, { 0x6704, 0x3d },
|
|
|
|
|
{ 0x6705, 0x71 }, { 0x6706, 0x78 }, { 0x6708, 0x05 }, { 0x6f06, 0x6f },
|
|
|
|
|
{ 0x6f07, 0x00 }, { 0x6f0a, 0x6f }, { 0x6f0b, 0x00 }, { 0x6f00, 0x03 },
|
|
|
|
|
{ 0xc34c, 0x01 }, { 0xc34d, 0x00 }, { 0xc34e, 0x46 }, { 0xc34f, 0x55 },
|
|
|
|
|
{ 0xc350, 0x00 }, { 0xc351, 0x40 }, { 0xc352, 0x00 }, { 0xc353, 0xff },
|
|
|
|
|
{ 0xc354, 0x04 }, { 0xc355, 0x08 }, { 0xc356, 0x01 }, { 0xc357, 0xef },
|
|
|
|
|
{ 0xc358, 0x30 }, { 0xc359, 0x01 }, { 0xc35a, 0x64 }, { 0xc35b, 0x46 },
|
|
|
|
|
{ 0xc35c, 0x00 }, { 0x3042, 0xf0 }, { 0x3042, 0xf0 }, { 0x3042, 0xf0 },
|
|
|
|
|
{ 0x3042, 0xf0 }, { 0x3042, 0xf0 }, { 0x3042, 0xf0 }, { 0x3042, 0xf0 },
|
|
|
|
|
{ 0x3042, 0xf0 }, { 0x3042, 0xf0 }, { 0x3042, 0xf0 }, { 0x3042, 0xf0 },
|
|
|
|
|
{ 0x3042, 0xf0 }, { 0x3042, 0xf0 }, { 0x3042, 0xf0 }, { 0x3042, 0xf0 },
|
|
|
|
|
{ 0x3042, 0xf0 }, { 0x3042, 0xf0 }, { 0x3042, 0xf0 }, { 0x3042, 0xf0 },
|
|
|
|
|
{ 0x3042, 0xf0 }, { 0x3042, 0xf0 }, { 0x3042, 0xf0 }, { 0x3042, 0xf0 },
|
|
|
|
|
{ 0x3042, 0xf0 }, { 0x3042, 0xf0 }, { 0x3042, 0xf0 }, { 0xc261, 0x01 },
|
|
|
|
|
{ 0x301b, 0xf0 }, { 0x301c, 0xf0 }, { 0x301a, 0xf0 }, { 0x6f00, 0xc3 },
|
|
|
|
|
{ 0xc46a, 0x30 }, { 0xc46d, 0x20 }, { 0xc464, 0x84 }, { 0xc465, 0x00 },
|
|
|
|
|
{ 0x6f00, 0x03 }, { 0x6f00, 0x43 }, { 0x381c, 0x00 }, { 0x381d, 0x40 },
|
|
|
|
|
{ 0xc454, 0x01 }, { 0x6f00, 0xc3 }, { 0xc454, 0x00 }, { 0xc4b1, 0x02 },
|
|
|
|
|
{ 0xc4b2, 0x01 }, { 0xc4b3, 0x03 }, { 0x6f00, 0x03 }, { 0x6f00, 0x43 },
|
|
|
|
|
/* enable FSIN (FRAMESYNC input) functionality */
|
|
|
|
|
{ 0x3832, (0x0d + 2 * 0x20 + 0x15 + 38) >> 8 },
|
|
|
|
|
{ 0x3833, (0x0d + 2 * 0x20 + 0x15 + 38) & 0xff },
|
|
|
|
|
{ 0x3834, OV10635_VTS >> 8 }, { 0x3835, OV10635_VTS & 0xff },
|
|
|
|
|
{ 0x302e, 0x01 },
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
struct rdacm20_device {
|
|
|
|
|
struct device *dev;
|
2021-06-16 12:46:13 +00:00
|
|
|
struct max9271_device serializer;
|
2020-06-12 14:47:13 +00:00
|
|
|
struct i2c_client *sensor;
|
|
|
|
|
struct v4l2_subdev sd;
|
|
|
|
|
struct media_pad pad;
|
|
|
|
|
struct v4l2_ctrl_handler ctrls;
|
|
|
|
|
u32 addrs[2];
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
static inline struct rdacm20_device *sd_to_rdacm20(struct v4l2_subdev *sd)
|
|
|
|
|
{
|
|
|
|
|
return container_of(sd, struct rdacm20_device, sd);
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static inline struct rdacm20_device *i2c_to_rdacm20(struct i2c_client *client)
|
|
|
|
|
{
|
|
|
|
|
return sd_to_rdacm20(i2c_get_clientdata(client));
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static int ov10635_read16(struct rdacm20_device *dev, u16 reg)
|
|
|
|
|
{
|
|
|
|
|
u8 buf[2] = { reg >> 8, reg & 0xff };
|
|
|
|
|
int ret;
|
|
|
|
|
|
|
|
|
|
ret = i2c_master_send(dev->sensor, buf, 2);
|
|
|
|
|
if (ret != 2) {
|
|
|
|
|
dev_dbg(dev->dev, "%s: register 0x%04x write failed (%d)\n",
|
|
|
|
|
__func__, reg, ret);
|
|
|
|
|
return ret;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
ret = i2c_master_recv(dev->sensor, buf, 2);
|
|
|
|
|
if (ret < 0) {
|
|
|
|
|
dev_dbg(dev->dev, "%s: register 0x%04x read failed (%d)\n",
|
|
|
|
|
__func__, reg, ret);
|
|
|
|
|
return ret;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
return (buf[0] << 8) | buf[1];
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static int __ov10635_write(struct rdacm20_device *dev, u16 reg, u8 val)
|
|
|
|
|
{
|
|
|
|
|
u8 buf[3] = { reg >> 8, reg & 0xff, val };
|
|
|
|
|
int ret;
|
|
|
|
|
|
|
|
|
|
dev_dbg(dev->dev, "%s(0x%04x, 0x%02x)\n", __func__, reg, val);
|
|
|
|
|
|
|
|
|
|
ret = i2c_master_send(dev->sensor, buf, 3);
|
|
|
|
|
return ret < 0 ? ret : 0;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static int ov10635_write(struct rdacm20_device *dev, u16 reg, u8 val)
|
|
|
|
|
{
|
|
|
|
|
int ret;
|
|
|
|
|
|
|
|
|
|
ret = __ov10635_write(dev, reg, val);
|
|
|
|
|
if (ret < 0)
|
|
|
|
|
dev_err(dev->dev, "%s: register 0x%04x write failed (%d)\n",
|
|
|
|
|
__func__, reg, ret);
|
|
|
|
|
|
|
|
|
|
return ret;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static int ov10635_set_regs(struct rdacm20_device *dev,
|
|
|
|
|
const struct ov10635_reg *regs,
|
|
|
|
|
unsigned int nr_regs)
|
|
|
|
|
{
|
|
|
|
|
unsigned int i;
|
|
|
|
|
int ret;
|
|
|
|
|
|
|
|
|
|
for (i = 0; i < nr_regs; i++) {
|
|
|
|
|
ret = __ov10635_write(dev, regs[i].reg, regs[i].val);
|
|
|
|
|
if (ret) {
|
|
|
|
|
dev_err(dev->dev,
|
|
|
|
|
"%s: register %u (0x%04x) write failed (%d)\n",
|
|
|
|
|
__func__, i, regs[i].reg, ret);
|
|
|
|
|
return ret;
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static int rdacm20_s_stream(struct v4l2_subdev *sd, int enable)
|
|
|
|
|
{
|
|
|
|
|
struct rdacm20_device *dev = sd_to_rdacm20(sd);
|
|
|
|
|
|
2021-06-16 12:46:13 +00:00
|
|
|
return max9271_set_serial_link(&dev->serializer, enable);
|
2020-06-12 14:47:13 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static int rdacm20_enum_mbus_code(struct v4l2_subdev *sd,
|
media: v4l2-subdev: add subdev-wide state struct
We have 'struct v4l2_subdev_pad_config' which contains configuration for
a single pad used for the TRY functionality, and an array of those
structs is passed to various v4l2_subdev_pad_ops.
I was working on subdev internal routing between pads, and realized that
there's no way to add TRY functionality for routes, which is not pad
specific configuration. Adding a separate struct for try-route config
wouldn't work either, as e.g. set-fmt needs to know the try-route
configuration to propagate the settings.
This patch adds a new struct, 'struct v4l2_subdev_state' (which at the
moment only contains the v4l2_subdev_pad_config array) and the new
struct is used in most of the places where v4l2_subdev_pad_config was
used. All v4l2_subdev_pad_ops functions taking v4l2_subdev_pad_config
are changed to instead take v4l2_subdev_state.
The changes to drivers/media/v4l2-core/v4l2-subdev.c and
include/media/v4l2-subdev.h were written by hand, and all the driver
changes were done with the semantic patch below. The spatch needs to be
applied to a select list of directories. I used the following shell
commands to apply the spatch:
dirs="drivers/media/i2c drivers/media/platform drivers/media/usb drivers/media/test-drivers/vimc drivers/media/pci drivers/staging/media"
for dir in $dirs; do spatch -j8 --dir --include-headers --no-show-diff --in-place --sp-file v4l2-subdev-state.cocci $dir; done
Note that Coccinelle chokes on a few drivers (gcc extensions?). With
minor changes we can make Coccinelle run fine, and these changes can be
reverted after spatch. The diff for these changes is:
For drivers/media/i2c/s5k5baf.c:
@@ -1481,7 +1481,7 @@ static int s5k5baf_set_selection(struct v4l2_subdev *sd,
&s5k5baf_cis_rect,
v4l2_subdev_get_try_crop(sd, cfg, PAD_CIS),
v4l2_subdev_get_try_compose(sd, cfg, PAD_CIS),
- v4l2_subdev_get_try_crop(sd, cfg, PAD_OUT)
+ v4l2_subdev_get_try_crop(sd, cfg, PAD_OUT),
};
s5k5baf_set_rect_and_adjust(rects, rtype, &sel->r);
return 0;
For drivers/media/platform/s3c-camif/camif-capture.c:
@@ -1230,7 +1230,7 @@ static int s3c_camif_subdev_get_fmt(struct v4l2_subdev *sd,
*mf = camif->mbus_fmt;
break;
- case CAMIF_SD_PAD_SOURCE_C...CAMIF_SD_PAD_SOURCE_P:
+ case CAMIF_SD_PAD_SOURCE_C:
/* crop rectangle at camera interface input */
mf->width = camif->camif_crop.width;
mf->height = camif->camif_crop.height;
@@ -1332,7 +1332,7 @@ static int s3c_camif_subdev_set_fmt(struct v4l2_subdev *sd,
}
break;
- case CAMIF_SD_PAD_SOURCE_C...CAMIF_SD_PAD_SOURCE_P:
+ case CAMIF_SD_PAD_SOURCE_C:
/* Pixel format can be only changed on the sink pad. */
mf->code = camif->mbus_fmt.code;
mf->width = crop->width;
The semantic patch is:
// <smpl>
// Change function parameter
@@
identifier func;
identifier cfg;
@@
func(...,
- struct v4l2_subdev_pad_config *cfg
+ struct v4l2_subdev_state *sd_state
, ...)
{
<...
- cfg
+ sd_state
...>
}
// Change function declaration parameter
@@
identifier func;
identifier cfg;
type T;
@@
T func(...,
- struct v4l2_subdev_pad_config *cfg
+ struct v4l2_subdev_state *sd_state
, ...);
// Change function return value
@@
identifier func;
@@
- struct v4l2_subdev_pad_config
+ struct v4l2_subdev_state
*func(...)
{
...
}
// Change function declaration return value
@@
identifier func;
@@
- struct v4l2_subdev_pad_config
+ struct v4l2_subdev_state
*func(...);
// Some drivers pass a local pad_cfg for a single pad to a called function. Wrap it
// inside a pad_state.
@@
identifier func;
identifier pad_cfg;
@@
func(...)
{
...
struct v4l2_subdev_pad_config pad_cfg;
+ struct v4l2_subdev_state pad_state = { .pads = &pad_cfg };
<+...
(
v4l2_subdev_call
|
sensor_call
|
isi_try_fse
|
isc_try_fse
|
saa_call_all
)
(...,
- &pad_cfg
+ &pad_state
,...)
...+>
}
// If the function uses fields from pad_config, access via state->pads
@@
identifier func;
identifier state;
@@
func(...,
struct v4l2_subdev_state *state
, ...)
{
<...
(
- state->try_fmt
+ state->pads->try_fmt
|
- state->try_crop
+ state->pads->try_crop
|
- state->try_compose
+ state->pads->try_compose
)
...>
}
// If the function accesses the filehandle, use fh->state instead
@@
struct v4l2_subdev_fh *fh;
@@
- fh->pad
+ fh->state
@@
struct v4l2_subdev_fh fh;
@@
- fh.pad
+ fh.state
// Start of vsp1 specific
@@
@@
struct vsp1_entity {
...
- struct v4l2_subdev_pad_config *config;
+ struct v4l2_subdev_state *config;
...
};
@@
symbol entity;
@@
vsp1_entity_init(...)
{
...
entity->config =
- v4l2_subdev_alloc_pad_config
+ v4l2_subdev_alloc_state
(&entity->subdev);
...
}
@@
symbol entity;
@@
vsp1_entity_destroy(...)
{
...
- v4l2_subdev_free_pad_config
+ v4l2_subdev_free_state
(entity->config);
...
}
@exists@
identifier func =~ "(^vsp1.*)|(hsit_set_format)|(sru_enum_frame_size)|(sru_set_format)|(uif_get_selection)|(uif_set_selection)|(uds_enum_frame_size)|(uds_set_format)|(brx_set_format)|(brx_get_selection)|(histo_get_selection)|(histo_set_selection)|(brx_set_selection)";
symbol config;
@@
func(...) {
...
- struct v4l2_subdev_pad_config *config;
+ struct v4l2_subdev_state *config;
...
}
// End of vsp1 specific
// Start of rcar specific
@@
identifier sd;
identifier pad_cfg;
@@
rvin_try_format(...)
{
...
- struct v4l2_subdev_pad_config *pad_cfg;
+ struct v4l2_subdev_state *sd_state;
...
- pad_cfg = v4l2_subdev_alloc_pad_config(sd);
+ sd_state = v4l2_subdev_alloc_state(sd);
<...
- pad_cfg
+ sd_state
...>
- v4l2_subdev_free_pad_config(pad_cfg);
+ v4l2_subdev_free_state(sd_state);
...
}
// End of rcar specific
// Start of rockchip specific
@@
identifier func =~ "(rkisp1_rsz_get_pad_fmt)|(rkisp1_rsz_get_pad_crop)|(rkisp1_rsz_register)";
symbol rsz;
symbol pad_cfg;
@@
func(...)
{
+ struct v4l2_subdev_state state = { .pads = rsz->pad_cfg };
...
- rsz->pad_cfg
+ &state
...
}
@@
identifier func =~ "(rkisp1_isp_get_pad_fmt)|(rkisp1_isp_get_pad_crop)";
symbol isp;
symbol pad_cfg;
@@
func(...)
{
+ struct v4l2_subdev_state state = { .pads = isp->pad_cfg };
...
- isp->pad_cfg
+ &state
...
}
@@
symbol rkisp1;
symbol isp;
symbol pad_cfg;
@@
rkisp1_isp_register(...)
{
+ struct v4l2_subdev_state state = { .pads = rkisp1->isp.pad_cfg };
...
- rkisp1->isp.pad_cfg
+ &state
...
}
// End of rockchip specific
// Start of tegra-video specific
@@
identifier sd;
identifier pad_cfg;
@@
__tegra_channel_try_format(...)
{
...
- struct v4l2_subdev_pad_config *pad_cfg;
+ struct v4l2_subdev_state *sd_state;
...
- pad_cfg = v4l2_subdev_alloc_pad_config(sd);
+ sd_state = v4l2_subdev_alloc_state(sd);
<...
- pad_cfg
+ sd_state
...>
- v4l2_subdev_free_pad_config(pad_cfg);
+ v4l2_subdev_free_state(sd_state);
...
}
@@
identifier sd_state;
@@
__tegra_channel_try_format(...)
{
...
struct v4l2_subdev_state *sd_state;
<...
- sd_state->try_crop
+ sd_state->pads->try_crop
...>
}
// End of tegra-video specific
// </smpl>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-06-10 14:55:58 +00:00
|
|
|
struct v4l2_subdev_state *sd_state,
|
2020-06-12 14:47:13 +00:00
|
|
|
struct v4l2_subdev_mbus_code_enum *code)
|
|
|
|
|
{
|
|
|
|
|
if (code->pad || code->index > 0)
|
|
|
|
|
return -EINVAL;
|
|
|
|
|
|
2022-03-16 21:09:16 +00:00
|
|
|
code->code = MEDIA_BUS_FMT_UYVY8_1X16;
|
2020-06-12 14:47:13 +00:00
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static int rdacm20_get_fmt(struct v4l2_subdev *sd,
|
media: v4l2-subdev: add subdev-wide state struct
We have 'struct v4l2_subdev_pad_config' which contains configuration for
a single pad used for the TRY functionality, and an array of those
structs is passed to various v4l2_subdev_pad_ops.
I was working on subdev internal routing between pads, and realized that
there's no way to add TRY functionality for routes, which is not pad
specific configuration. Adding a separate struct for try-route config
wouldn't work either, as e.g. set-fmt needs to know the try-route
configuration to propagate the settings.
This patch adds a new struct, 'struct v4l2_subdev_state' (which at the
moment only contains the v4l2_subdev_pad_config array) and the new
struct is used in most of the places where v4l2_subdev_pad_config was
used. All v4l2_subdev_pad_ops functions taking v4l2_subdev_pad_config
are changed to instead take v4l2_subdev_state.
The changes to drivers/media/v4l2-core/v4l2-subdev.c and
include/media/v4l2-subdev.h were written by hand, and all the driver
changes were done with the semantic patch below. The spatch needs to be
applied to a select list of directories. I used the following shell
commands to apply the spatch:
dirs="drivers/media/i2c drivers/media/platform drivers/media/usb drivers/media/test-drivers/vimc drivers/media/pci drivers/staging/media"
for dir in $dirs; do spatch -j8 --dir --include-headers --no-show-diff --in-place --sp-file v4l2-subdev-state.cocci $dir; done
Note that Coccinelle chokes on a few drivers (gcc extensions?). With
minor changes we can make Coccinelle run fine, and these changes can be
reverted after spatch. The diff for these changes is:
For drivers/media/i2c/s5k5baf.c:
@@ -1481,7 +1481,7 @@ static int s5k5baf_set_selection(struct v4l2_subdev *sd,
&s5k5baf_cis_rect,
v4l2_subdev_get_try_crop(sd, cfg, PAD_CIS),
v4l2_subdev_get_try_compose(sd, cfg, PAD_CIS),
- v4l2_subdev_get_try_crop(sd, cfg, PAD_OUT)
+ v4l2_subdev_get_try_crop(sd, cfg, PAD_OUT),
};
s5k5baf_set_rect_and_adjust(rects, rtype, &sel->r);
return 0;
For drivers/media/platform/s3c-camif/camif-capture.c:
@@ -1230,7 +1230,7 @@ static int s3c_camif_subdev_get_fmt(struct v4l2_subdev *sd,
*mf = camif->mbus_fmt;
break;
- case CAMIF_SD_PAD_SOURCE_C...CAMIF_SD_PAD_SOURCE_P:
+ case CAMIF_SD_PAD_SOURCE_C:
/* crop rectangle at camera interface input */
mf->width = camif->camif_crop.width;
mf->height = camif->camif_crop.height;
@@ -1332,7 +1332,7 @@ static int s3c_camif_subdev_set_fmt(struct v4l2_subdev *sd,
}
break;
- case CAMIF_SD_PAD_SOURCE_C...CAMIF_SD_PAD_SOURCE_P:
+ case CAMIF_SD_PAD_SOURCE_C:
/* Pixel format can be only changed on the sink pad. */
mf->code = camif->mbus_fmt.code;
mf->width = crop->width;
The semantic patch is:
// <smpl>
// Change function parameter
@@
identifier func;
identifier cfg;
@@
func(...,
- struct v4l2_subdev_pad_config *cfg
+ struct v4l2_subdev_state *sd_state
, ...)
{
<...
- cfg
+ sd_state
...>
}
// Change function declaration parameter
@@
identifier func;
identifier cfg;
type T;
@@
T func(...,
- struct v4l2_subdev_pad_config *cfg
+ struct v4l2_subdev_state *sd_state
, ...);
// Change function return value
@@
identifier func;
@@
- struct v4l2_subdev_pad_config
+ struct v4l2_subdev_state
*func(...)
{
...
}
// Change function declaration return value
@@
identifier func;
@@
- struct v4l2_subdev_pad_config
+ struct v4l2_subdev_state
*func(...);
// Some drivers pass a local pad_cfg for a single pad to a called function. Wrap it
// inside a pad_state.
@@
identifier func;
identifier pad_cfg;
@@
func(...)
{
...
struct v4l2_subdev_pad_config pad_cfg;
+ struct v4l2_subdev_state pad_state = { .pads = &pad_cfg };
<+...
(
v4l2_subdev_call
|
sensor_call
|
isi_try_fse
|
isc_try_fse
|
saa_call_all
)
(...,
- &pad_cfg
+ &pad_state
,...)
...+>
}
// If the function uses fields from pad_config, access via state->pads
@@
identifier func;
identifier state;
@@
func(...,
struct v4l2_subdev_state *state
, ...)
{
<...
(
- state->try_fmt
+ state->pads->try_fmt
|
- state->try_crop
+ state->pads->try_crop
|
- state->try_compose
+ state->pads->try_compose
)
...>
}
// If the function accesses the filehandle, use fh->state instead
@@
struct v4l2_subdev_fh *fh;
@@
- fh->pad
+ fh->state
@@
struct v4l2_subdev_fh fh;
@@
- fh.pad
+ fh.state
// Start of vsp1 specific
@@
@@
struct vsp1_entity {
...
- struct v4l2_subdev_pad_config *config;
+ struct v4l2_subdev_state *config;
...
};
@@
symbol entity;
@@
vsp1_entity_init(...)
{
...
entity->config =
- v4l2_subdev_alloc_pad_config
+ v4l2_subdev_alloc_state
(&entity->subdev);
...
}
@@
symbol entity;
@@
vsp1_entity_destroy(...)
{
...
- v4l2_subdev_free_pad_config
+ v4l2_subdev_free_state
(entity->config);
...
}
@exists@
identifier func =~ "(^vsp1.*)|(hsit_set_format)|(sru_enum_frame_size)|(sru_set_format)|(uif_get_selection)|(uif_set_selection)|(uds_enum_frame_size)|(uds_set_format)|(brx_set_format)|(brx_get_selection)|(histo_get_selection)|(histo_set_selection)|(brx_set_selection)";
symbol config;
@@
func(...) {
...
- struct v4l2_subdev_pad_config *config;
+ struct v4l2_subdev_state *config;
...
}
// End of vsp1 specific
// Start of rcar specific
@@
identifier sd;
identifier pad_cfg;
@@
rvin_try_format(...)
{
...
- struct v4l2_subdev_pad_config *pad_cfg;
+ struct v4l2_subdev_state *sd_state;
...
- pad_cfg = v4l2_subdev_alloc_pad_config(sd);
+ sd_state = v4l2_subdev_alloc_state(sd);
<...
- pad_cfg
+ sd_state
...>
- v4l2_subdev_free_pad_config(pad_cfg);
+ v4l2_subdev_free_state(sd_state);
...
}
// End of rcar specific
// Start of rockchip specific
@@
identifier func =~ "(rkisp1_rsz_get_pad_fmt)|(rkisp1_rsz_get_pad_crop)|(rkisp1_rsz_register)";
symbol rsz;
symbol pad_cfg;
@@
func(...)
{
+ struct v4l2_subdev_state state = { .pads = rsz->pad_cfg };
...
- rsz->pad_cfg
+ &state
...
}
@@
identifier func =~ "(rkisp1_isp_get_pad_fmt)|(rkisp1_isp_get_pad_crop)";
symbol isp;
symbol pad_cfg;
@@
func(...)
{
+ struct v4l2_subdev_state state = { .pads = isp->pad_cfg };
...
- isp->pad_cfg
+ &state
...
}
@@
symbol rkisp1;
symbol isp;
symbol pad_cfg;
@@
rkisp1_isp_register(...)
{
+ struct v4l2_subdev_state state = { .pads = rkisp1->isp.pad_cfg };
...
- rkisp1->isp.pad_cfg
+ &state
...
}
// End of rockchip specific
// Start of tegra-video specific
@@
identifier sd;
identifier pad_cfg;
@@
__tegra_channel_try_format(...)
{
...
- struct v4l2_subdev_pad_config *pad_cfg;
+ struct v4l2_subdev_state *sd_state;
...
- pad_cfg = v4l2_subdev_alloc_pad_config(sd);
+ sd_state = v4l2_subdev_alloc_state(sd);
<...
- pad_cfg
+ sd_state
...>
- v4l2_subdev_free_pad_config(pad_cfg);
+ v4l2_subdev_free_state(sd_state);
...
}
@@
identifier sd_state;
@@
__tegra_channel_try_format(...)
{
...
struct v4l2_subdev_state *sd_state;
<...
- sd_state->try_crop
+ sd_state->pads->try_crop
...>
}
// End of tegra-video specific
// </smpl>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-06-10 14:55:58 +00:00
|
|
|
struct v4l2_subdev_state *sd_state,
|
2020-06-12 14:47:13 +00:00
|
|
|
struct v4l2_subdev_format *format)
|
|
|
|
|
{
|
|
|
|
|
struct v4l2_mbus_framefmt *mf = &format->format;
|
|
|
|
|
|
|
|
|
|
if (format->pad)
|
|
|
|
|
return -EINVAL;
|
|
|
|
|
|
|
|
|
|
mf->width = OV10635_WIDTH;
|
|
|
|
|
mf->height = OV10635_HEIGHT;
|
2022-03-16 21:09:16 +00:00
|
|
|
mf->code = MEDIA_BUS_FMT_UYVY8_1X16;
|
2020-06-12 14:47:13 +00:00
|
|
|
mf->colorspace = V4L2_COLORSPACE_RAW;
|
|
|
|
|
mf->field = V4L2_FIELD_NONE;
|
|
|
|
|
mf->ycbcr_enc = V4L2_YCBCR_ENC_601;
|
|
|
|
|
mf->quantization = V4L2_QUANTIZATION_FULL_RANGE;
|
|
|
|
|
mf->xfer_func = V4L2_XFER_FUNC_NONE;
|
|
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
|
}
|
|
|
|
|
|
2020-11-19 22:22:48 +00:00
|
|
|
static const struct v4l2_subdev_video_ops rdacm20_video_ops = {
|
2020-06-12 14:47:13 +00:00
|
|
|
.s_stream = rdacm20_s_stream,
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
static const struct v4l2_subdev_pad_ops rdacm20_subdev_pad_ops = {
|
|
|
|
|
.enum_mbus_code = rdacm20_enum_mbus_code,
|
|
|
|
|
.get_fmt = rdacm20_get_fmt,
|
|
|
|
|
.set_fmt = rdacm20_get_fmt,
|
|
|
|
|
};
|
|
|
|
|
|
2020-11-19 22:22:48 +00:00
|
|
|
static const struct v4l2_subdev_ops rdacm20_subdev_ops = {
|
2020-06-12 14:47:13 +00:00
|
|
|
.video = &rdacm20_video_ops,
|
|
|
|
|
.pad = &rdacm20_subdev_pad_ops,
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
static int rdacm20_initialize(struct rdacm20_device *dev)
|
|
|
|
|
{
|
|
|
|
|
unsigned int retry = 3;
|
|
|
|
|
int ret;
|
|
|
|
|
|
2021-06-16 12:46:13 +00:00
|
|
|
max9271_wake_up(&dev->serializer);
|
2020-06-12 14:47:13 +00:00
|
|
|
|
|
|
|
|
/* Serial link disabled during config as it needs a valid pixel clock. */
|
2021-06-16 12:46:13 +00:00
|
|
|
ret = max9271_set_serial_link(&dev->serializer, false);
|
2020-06-12 14:47:13 +00:00
|
|
|
if (ret)
|
|
|
|
|
return ret;
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* Ensure that we have a good link configuration before attempting to
|
|
|
|
|
* identify the device.
|
|
|
|
|
*/
|
2021-06-16 12:46:15 +00:00
|
|
|
ret = max9271_configure_i2c(&dev->serializer,
|
|
|
|
|
MAX9271_I2CSLVSH_469NS_234NS |
|
|
|
|
|
MAX9271_I2CSLVTO_1024US |
|
|
|
|
|
MAX9271_I2CMSTBT_105KBPS);
|
|
|
|
|
if (ret)
|
|
|
|
|
return ret;
|
2020-06-12 14:47:13 +00:00
|
|
|
|
2021-06-16 12:46:16 +00:00
|
|
|
/*
|
|
|
|
|
* Hold OV10635 in reset during max9271 configuration. The reset signal
|
|
|
|
|
* has to be asserted for at least 200 microseconds.
|
|
|
|
|
*/
|
|
|
|
|
ret = max9271_enable_gpios(&dev->serializer, MAX9271_GPIO1OUT);
|
|
|
|
|
if (ret)
|
|
|
|
|
return ret;
|
|
|
|
|
|
|
|
|
|
ret = max9271_clear_gpios(&dev->serializer, MAX9271_GPIO1OUT);
|
|
|
|
|
if (ret)
|
|
|
|
|
return ret;
|
|
|
|
|
usleep_range(200, 500);
|
|
|
|
|
|
2021-06-16 12:46:15 +00:00
|
|
|
ret = max9271_configure_gmsl_link(&dev->serializer);
|
|
|
|
|
if (ret)
|
|
|
|
|
return ret;
|
2020-06-12 14:47:13 +00:00
|
|
|
|
2021-06-16 12:46:13 +00:00
|
|
|
ret = max9271_verify_id(&dev->serializer);
|
2020-06-12 14:47:13 +00:00
|
|
|
if (ret < 0)
|
|
|
|
|
return ret;
|
|
|
|
|
|
2021-06-16 12:46:13 +00:00
|
|
|
ret = max9271_set_address(&dev->serializer, dev->addrs[0]);
|
2020-06-12 14:47:13 +00:00
|
|
|
if (ret < 0)
|
|
|
|
|
return ret;
|
2021-06-16 12:46:13 +00:00
|
|
|
dev->serializer.client->addr = dev->addrs[0];
|
2020-06-12 14:47:13 +00:00
|
|
|
|
|
|
|
|
/*
|
2021-06-16 12:46:16 +00:00
|
|
|
* Release ov10635 from reset and initialize it. The image sensor
|
|
|
|
|
* requires at least 2048 XVCLK cycles (85 micro-seconds at 24MHz)
|
|
|
|
|
* before being available. Stay safe and wait up to 500 micro-seconds.
|
2020-06-12 14:47:13 +00:00
|
|
|
*/
|
2021-06-16 12:46:13 +00:00
|
|
|
ret = max9271_set_gpios(&dev->serializer, MAX9271_GPIO1OUT);
|
2020-11-20 16:15:29 +00:00
|
|
|
if (ret)
|
|
|
|
|
return ret;
|
2021-06-16 12:46:16 +00:00
|
|
|
usleep_range(100, 500);
|
2020-06-12 14:47:13 +00:00
|
|
|
|
|
|
|
|
again:
|
|
|
|
|
ret = ov10635_read16(dev, OV10635_PID);
|
|
|
|
|
if (ret < 0) {
|
|
|
|
|
if (retry--)
|
|
|
|
|
goto again;
|
|
|
|
|
|
|
|
|
|
dev_err(dev->dev, "OV10635 ID read failed (%d)\n",
|
|
|
|
|
ret);
|
|
|
|
|
return -ENXIO;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
if (ret != OV10635_VERSION) {
|
|
|
|
|
if (retry--)
|
|
|
|
|
goto again;
|
|
|
|
|
|
|
|
|
|
dev_err(dev->dev, "OV10635 ID mismatch (0x%04x)\n",
|
|
|
|
|
ret);
|
|
|
|
|
return -ENXIO;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
/* Change the sensor I2C address. */
|
|
|
|
|
ret = ov10635_write(dev, OV10635_SC_CMMN_SCCB_ID,
|
|
|
|
|
(dev->addrs[1] << 1) |
|
|
|
|
|
OV10635_SC_CMMN_SCCB_ID_SELECT);
|
|
|
|
|
if (ret < 0) {
|
|
|
|
|
dev_err(dev->dev,
|
|
|
|
|
"OV10635 I2C address change failed (%d)\n", ret);
|
|
|
|
|
return ret;
|
|
|
|
|
}
|
|
|
|
|
dev->sensor->addr = dev->addrs[1];
|
|
|
|
|
usleep_range(3500, 5000);
|
|
|
|
|
|
|
|
|
|
/* Program the 0V10635 initial configuration. */
|
|
|
|
|
ret = ov10635_set_regs(dev, ov10635_regs_wizard,
|
|
|
|
|
ARRAY_SIZE(ov10635_regs_wizard));
|
|
|
|
|
if (ret)
|
|
|
|
|
return ret;
|
|
|
|
|
|
2021-06-16 12:46:14 +00:00
|
|
|
dev_info(dev->dev, "Identified RDACM20 camera module\n");
|
2020-06-12 14:47:13 +00:00
|
|
|
|
2021-06-16 12:46:12 +00:00
|
|
|
/*
|
|
|
|
|
* Set reverse channel high threshold to increase noise immunity.
|
|
|
|
|
*
|
|
|
|
|
* This should be compensated by increasing the reverse channel
|
|
|
|
|
* amplitude on the remote deserializer side.
|
|
|
|
|
*
|
|
|
|
|
* TODO Inspect the embedded MCU programming sequence to make sure
|
|
|
|
|
* there are no conflicts with the configuration applied here.
|
|
|
|
|
*
|
|
|
|
|
* TODO Clarify the embedded MCU startup delay to avoid write
|
|
|
|
|
* collisions on the I2C bus.
|
|
|
|
|
*/
|
|
|
|
|
return max9271_set_high_threshold(&dev->serializer, true);
|
2020-06-12 14:47:13 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static int rdacm20_probe(struct i2c_client *client)
|
|
|
|
|
{
|
|
|
|
|
struct rdacm20_device *dev;
|
|
|
|
|
int ret;
|
|
|
|
|
|
|
|
|
|
dev = devm_kzalloc(&client->dev, sizeof(*dev), GFP_KERNEL);
|
|
|
|
|
if (!dev)
|
|
|
|
|
return -ENOMEM;
|
|
|
|
|
dev->dev = &client->dev;
|
2021-06-16 12:46:13 +00:00
|
|
|
dev->serializer.client = client;
|
2020-06-12 14:47:13 +00:00
|
|
|
|
|
|
|
|
ret = of_property_read_u32_array(client->dev.of_node, "reg",
|
|
|
|
|
dev->addrs, 2);
|
|
|
|
|
if (ret < 0) {
|
|
|
|
|
dev_err(dev->dev, "Invalid DT reg property: %d\n", ret);
|
|
|
|
|
return -EINVAL;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
/* Create the dummy I2C client for the sensor. */
|
|
|
|
|
dev->sensor = i2c_new_dummy_device(client->adapter,
|
|
|
|
|
OV10635_I2C_ADDRESS);
|
|
|
|
|
if (IS_ERR(dev->sensor)) {
|
|
|
|
|
ret = PTR_ERR(dev->sensor);
|
|
|
|
|
goto error;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
/* Initialize the hardware. */
|
|
|
|
|
ret = rdacm20_initialize(dev);
|
|
|
|
|
if (ret < 0)
|
|
|
|
|
goto error;
|
|
|
|
|
|
|
|
|
|
/* Initialize and register the subdevice. */
|
|
|
|
|
v4l2_i2c_subdev_init(&dev->sd, client, &rdacm20_subdev_ops);
|
|
|
|
|
dev->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
|
|
|
|
|
|
|
|
|
|
v4l2_ctrl_handler_init(&dev->ctrls, 1);
|
|
|
|
|
v4l2_ctrl_new_std(&dev->ctrls, NULL, V4L2_CID_PIXEL_RATE,
|
|
|
|
|
OV10635_PIXEL_RATE, OV10635_PIXEL_RATE, 1,
|
|
|
|
|
OV10635_PIXEL_RATE);
|
|
|
|
|
dev->sd.ctrl_handler = &dev->ctrls;
|
|
|
|
|
|
|
|
|
|
ret = dev->ctrls.error;
|
|
|
|
|
if (ret)
|
|
|
|
|
goto error_free_ctrls;
|
|
|
|
|
|
|
|
|
|
dev->pad.flags = MEDIA_PAD_FL_SOURCE;
|
2022-03-09 11:55:06 +00:00
|
|
|
dev->sd.entity.function = MEDIA_ENT_F_CAM_SENSOR;
|
2020-06-12 14:47:13 +00:00
|
|
|
ret = media_entity_pads_init(&dev->sd.entity, 1, &dev->pad);
|
|
|
|
|
if (ret < 0)
|
|
|
|
|
goto error_free_ctrls;
|
|
|
|
|
|
|
|
|
|
ret = v4l2_async_register_subdev(&dev->sd);
|
|
|
|
|
if (ret)
|
2023-02-18 23:21:02 +00:00
|
|
|
goto error_free_ctrls;
|
2020-06-12 14:47:13 +00:00
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
|
|
|
|
|
|
error_free_ctrls:
|
|
|
|
|
v4l2_ctrl_handler_free(&dev->ctrls);
|
|
|
|
|
error:
|
|
|
|
|
media_entity_cleanup(&dev->sd.entity);
|
|
|
|
|
if (dev->sensor)
|
|
|
|
|
i2c_unregister_device(dev->sensor);
|
|
|
|
|
|
|
|
|
|
dev_err(&client->dev, "probe failed\n");
|
|
|
|
|
|
|
|
|
|
return ret;
|
|
|
|
|
}
|
|
|
|
|
|
2022-08-15 08:02:30 +00:00
|
|
|
static void rdacm20_remove(struct i2c_client *client)
|
2020-06-12 14:47:13 +00:00
|
|
|
{
|
|
|
|
|
struct rdacm20_device *dev = i2c_to_rdacm20(client);
|
|
|
|
|
|
|
|
|
|
v4l2_async_unregister_subdev(&dev->sd);
|
|
|
|
|
v4l2_ctrl_handler_free(&dev->ctrls);
|
|
|
|
|
media_entity_cleanup(&dev->sd.entity);
|
|
|
|
|
i2c_unregister_device(dev->sensor);
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static void rdacm20_shutdown(struct i2c_client *client)
|
|
|
|
|
{
|
|
|
|
|
struct rdacm20_device *dev = i2c_to_rdacm20(client);
|
|
|
|
|
|
|
|
|
|
/* make sure stream off during shutdown (reset/reboot) */
|
|
|
|
|
rdacm20_s_stream(&dev->sd, 0);
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static const struct of_device_id rdacm20_of_ids[] = {
|
|
|
|
|
{ .compatible = "imi,rdacm20", },
|
|
|
|
|
{ }
|
|
|
|
|
};
|
|
|
|
|
MODULE_DEVICE_TABLE(of, rdacm20_of_ids);
|
|
|
|
|
|
|
|
|
|
static struct i2c_driver rdacm20_i2c_driver = {
|
|
|
|
|
.driver = {
|
|
|
|
|
.name = "rdacm20",
|
|
|
|
|
.of_match_table = rdacm20_of_ids,
|
|
|
|
|
},
|
2023-05-14 12:04:07 +00:00
|
|
|
.probe = rdacm20_probe,
|
2020-06-12 14:47:13 +00:00
|
|
|
.remove = rdacm20_remove,
|
|
|
|
|
.shutdown = rdacm20_shutdown,
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
module_i2c_driver(rdacm20_i2c_driver);
|
|
|
|
|
|
|
|
|
|
MODULE_DESCRIPTION("GMSL Camera driver for RDACM20");
|
|
|
|
|
MODULE_AUTHOR("Vladimir Barinov");
|
|
|
|
|
MODULE_LICENSE("GPL");
|
