linux/fs/namespace.c

5825 lines
143 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0-only
/*
* linux/fs/namespace.c
*
* (C) Copyright Al Viro 2000, 2001
*
* Based on code from fs/super.c, copyright Linus Torvalds and others.
* Heavily rewritten.
*/
#include <linux/syscalls.h>
#include <linux/export.h>
#include <linux/capability.h>
#include <linux/mnt_namespace.h>
#include <linux/user_namespace.h>
#include <linux/namei.h>
#include <linux/security.h>
#include <linux/cred.h>
#include <linux/idr.h>
#include <linux/init.h> /* init_rootfs */
#include <linux/fs_struct.h> /* get_fs_root et.al. */
#include <linux/fsnotify.h> /* fsnotify_vfsmount_delete */
#include <linux/file.h>
#include <linux/uaccess.h>
#include <linux/proc_ns.h>
#include <linux/magic.h>
mm: remove include/linux/bootmem.h Move remaining definitions and declarations from include/linux/bootmem.h into include/linux/memblock.h and remove the redundant header. The includes were replaced with the semantic patch below and then semi-automated removal of duplicated '#include <linux/memblock.h> @@ @@ - #include <linux/bootmem.h> + #include <linux/memblock.h> [sfr@canb.auug.org.au: dma-direct: fix up for the removal of linux/bootmem.h] Link: http://lkml.kernel.org/r/20181002185342.133d1680@canb.auug.org.au [sfr@canb.auug.org.au: powerpc: fix up for removal of linux/bootmem.h] Link: http://lkml.kernel.org/r/20181005161406.73ef8727@canb.auug.org.au [sfr@canb.auug.org.au: x86/kaslr, ACPI/NUMA: fix for linux/bootmem.h removal] Link: http://lkml.kernel.org/r/20181008190341.5e396491@canb.auug.org.au Link: http://lkml.kernel.org/r/1536927045-23536-30-git-send-email-rppt@linux.vnet.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Zankel <chris@zankel.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Ingo Molnar <mingo@redhat.com> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: Jonas Bonn <jonas@southpole.se> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Ley Foon Tan <lftan@altera.com> Cc: Mark Salter <msalter@redhat.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Paul Burton <paul.burton@mips.com> Cc: Richard Kuo <rkuo@codeaurora.org> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Serge Semin <fancer.lancer@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-10-30 22:09:49 +00:00
#include <linux/memblock.h>
fs: introduce MOUNT_ATTR_IDMAP Introduce a new mount bind mount property to allow idmapping mounts. The MOUNT_ATTR_IDMAP flag can be set via the new mount_setattr() syscall together with a file descriptor referring to a user namespace. The user namespace referenced by the namespace file descriptor will be attached to the bind mount. All interactions with the filesystem going through that mount will be mapped according to the mapping specified in the user namespace attached to it. Using user namespaces to mark mounts means we can reuse all the existing infrastructure in the kernel that already exists to handle idmappings and can also use this for permission checking to allow unprivileged user to create idmapped mounts in the future. Idmapping a mount is decoupled from the caller's user and mount namespace. This means idmapped mounts can be created in the initial user namespace which is an important use-case for systemd-homed, portable usb-sticks between systems, sharing data between the initial user namespace and unprivileged containers, and other use-cases that have been brought up. For example, assume a home directory where all files are owned by uid and gid 1000 and the home directory is brought to a new laptop where the user has id 12345. The system administrator can simply create a mount of this home directory with a mapping of 1000:12345:1 and other mappings to indicate the ids should be kept. (With this it is e.g. also possible to create idmapped mounts on the host with an identity mapping 1:1:100000 where the root user is not mapped. A user with root access that e.g. has been pivot rooted into such a mount on the host will be not be able to execute, read, write, or create files as root.) Given that mapping a mount is decoupled from the caller's user namespace a sufficiently privileged process such as a container manager can set up an idmapped mount for the container and the container can simply pivot root to it. There's no need for the container to do anything. The mount will appear correctly mapped independent of the user namespace the container uses. This means we don't need to mark a mount as idmappable. In order to create an idmapped mount the caller must currently be privileged in the user namespace of the superblock the mount belongs to. Once a mount has been idmapped we don't allow it to change its mapping. This keeps permission checking and life-cycle management simple. Users wanting to change the idmapped can always create a new detached mount with a different idmapping. Link: https://lore.kernel.org/r/20210121131959.646623-36-christian.brauner@ubuntu.com Cc: Christoph Hellwig <hch@lst.de> Cc: David Howells <dhowells@redhat.com> Cc: Mauricio Vásquez Bernal <mauricio@kinvolk.io> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: linux-fsdevel@vger.kernel.org Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
2021-01-21 13:19:54 +00:00
#include <linux/proc_fs.h>
#include <linux/task_work.h>
#include <linux/sched/task.h>
#include <uapi/linux/mount.h>
#include <linux/fs_context.h>
#include <linux/shmem_fs.h>
fs: support mapped mounts of mapped filesystems In previous patches we added new and modified existing helpers to handle idmapped mounts of filesystems mounted with an idmapping. In this final patch we convert all relevant places in the vfs to actually pass the filesystem's idmapping into these helpers. With this the vfs is in shape to handle idmapped mounts of filesystems mounted with an idmapping. Note that this is just the generic infrastructure. Actually adding support for idmapped mounts to a filesystem mountable with an idmapping is follow-up work. In this patch we extend the definition of an idmapped mount from a mount that that has the initial idmapping attached to it to a mount that has an idmapping attached to it which is not the same as the idmapping the filesystem was mounted with. As before we do not allow the initial idmapping to be attached to a mount. In addition this patch prevents that the idmapping the filesystem was mounted with can be attached to a mount created based on this filesystem. This has multiple reasons and advantages. First, attaching the initial idmapping or the filesystem's idmapping doesn't make much sense as in both cases the values of the i_{g,u}id and other places where k{g,u}ids are used do not change. Second, a user that really wants to do this for whatever reason can just create a separate dedicated identical idmapping to attach to the mount. Third, we can continue to use the initial idmapping as an indicator that a mount is not idmapped allowing us to continue to keep passing the initial idmapping into the mapping helpers to tell them that something isn't an idmapped mount even if the filesystem is mounted with an idmapping. Link: https://lore.kernel.org/r/20211123114227.3124056-11-brauner@kernel.org (v1) Link: https://lore.kernel.org/r/20211130121032.3753852-11-brauner@kernel.org (v2) Link: https://lore.kernel.org/r/20211203111707.3901969-11-brauner@kernel.org Cc: Seth Forshee <sforshee@digitalocean.com> Cc: Amir Goldstein <amir73il@gmail.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Al Viro <viro@zeniv.linux.org.uk> CC: linux-fsdevel@vger.kernel.org Reviewed-by: Seth Forshee <sforshee@digitalocean.com> Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
2021-12-03 11:17:07 +00:00
#include <linux/mnt_idmapping.h>
add listmount(2) syscall Add way to query the children of a particular mount. This is a more flexible way to iterate the mount tree than having to parse /proc/self/mountinfo. Lookup the mount by the new 64bit mount ID. If a mount needs to be queried based on path, then statx(2) can be used to first query the mount ID belonging to the path. Return an array of new (64bit) mount ID's. Without privileges only mounts are listed which are reachable from the task's root. Folded into this patch are several later improvements. Keeping them separate would make the history pointlessly confusing: * Recursive listing of mounts is the default now (cf. [1]). * Remove explicit LISTMOUNT_UNREACHABLE flag (cf. [1]) and fail if mount is unreachable from current root. This also makes permission checking consistent with statmount() (cf. [3]). * Start listing mounts in unique mount ID order (cf. [2]) to allow continuing listmount() from a midpoint. * Allow to continue listmount(). The @request_mask parameter is renamed and to @param to be usable by both statmount() and listmount(). If @param is set to a mount id then listmount() will continue listing mounts from that id on. This allows listing mounts in multiple listmount invocations without having to resize the buffer. If @param is zero then the listing starts from the beginning (cf. [4]). * Don't return EOVERFLOW, instead return the buffer size which allows to detect a full buffer as well (cf. [4]). Signed-off-by: Miklos Szeredi <mszeredi@redhat.com> Link: https://lore.kernel.org/r/20231025140205.3586473-6-mszeredi@redhat.com Reviewed-by: Ian Kent <raven@themaw.net> Link: https://lore.kernel.org/r/20231128160337.29094-2-mszeredi@redhat.com [1] (folded) Link: https://lore.kernel.org/r/20231128160337.29094-3-mszeredi@redhat.com [2] (folded) Link: https://lore.kernel.org/r/20231128160337.29094-4-mszeredi@redhat.com [3] (folded) Link: https://lore.kernel.org/r/20231128160337.29094-5-mszeredi@redhat.com [4] (folded) [Christian Brauner <brauner@kernel.org>: various smaller fixes] Signed-off-by: Christian Brauner <brauner@kernel.org>
2023-10-25 14:02:03 +00:00
#include <linux/nospec.h>
#include "pnode.h"
#include "internal.h"
mnt: Add a per mount namespace limit on the number of mounts CAI Qian <caiqian@redhat.com> pointed out that the semantics of shared subtrees make it possible to create an exponentially increasing number of mounts in a mount namespace. mkdir /tmp/1 /tmp/2 mount --make-rshared / for i in $(seq 1 20) ; do mount --bind /tmp/1 /tmp/2 ; done Will create create 2^20 or 1048576 mounts, which is a practical problem as some people have managed to hit this by accident. As such CVE-2016-6213 was assigned. Ian Kent <raven@themaw.net> described the situation for autofs users as follows: > The number of mounts for direct mount maps is usually not very large because of > the way they are implemented, large direct mount maps can have performance > problems. There can be anywhere from a few (likely case a few hundred) to less > than 10000, plus mounts that have been triggered and not yet expired. > > Indirect mounts have one autofs mount at the root plus the number of mounts that > have been triggered and not yet expired. > > The number of autofs indirect map entries can range from a few to the common > case of several thousand and in rare cases up to between 30000 and 50000. I've > not heard of people with maps larger than 50000 entries. > > The larger the number of map entries the greater the possibility for a large > number of active mounts so it's not hard to expect cases of a 1000 or somewhat > more active mounts. So I am setting the default number of mounts allowed per mount namespace at 100,000. This is more than enough for any use case I know of, but small enough to quickly stop an exponential increase in mounts. Which should be perfect to catch misconfigurations and malfunctioning programs. For anyone who needs a higher limit this can be changed by writing to the new /proc/sys/fs/mount-max sysctl. Tested-by: CAI Qian <caiqian@redhat.com> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2016-09-28 05:27:17 +00:00
/* Maximum number of mounts in a mount namespace */
fs: move namespace sysctls and declare fs base directory This moves the namespace sysctls to its own file as part of the kernel/sysctl.c spring cleaning Since we have now removed all sysctls for "fs", we now have to declare it on the filesystem code, we do that using the new helper, which reduces boiler plate code. We rename init_fs_shared_sysctls() to init_fs_sysctls() to reflect that now fs/sysctls.c is taking on the burden of being the first to register the base directory as well. Lastly, since init code will load in the order in which we link it we have to move the sysctl code to be linked in early, so that its early init routine runs prior to other fs code. This way, other filesystem code can register their own sysctls using the helpers after this: * register_sysctl_init() * register_sysctl() Link: https://lkml.kernel.org/r/20211129211943.640266-3-mcgrof@kernel.org Signed-off-by: Luis Chamberlain <mcgrof@kernel.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: Antti Palosaari <crope@iki.fi> Cc: Christian Brauner <christian.brauner@ubuntu.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Eric Biederman <ebiederm@xmission.com> Cc: Eric Biggers <ebiggers@google.com> Cc: Iurii Zaikin <yzaikin@google.com> Cc: Kees Cook <keescook@chromium.org> Cc: Lukas Middendorf <kernel@tuxforce.de> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: "Naveen N. Rao" <naveen.n.rao@linux.ibm.com> Cc: Stephen Kitt <steve@sk2.org> Cc: Xiaoming Ni <nixiaoming@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-01-22 06:13:27 +00:00
static unsigned int sysctl_mount_max __read_mostly = 100000;
mnt: Add a per mount namespace limit on the number of mounts CAI Qian <caiqian@redhat.com> pointed out that the semantics of shared subtrees make it possible to create an exponentially increasing number of mounts in a mount namespace. mkdir /tmp/1 /tmp/2 mount --make-rshared / for i in $(seq 1 20) ; do mount --bind /tmp/1 /tmp/2 ; done Will create create 2^20 or 1048576 mounts, which is a practical problem as some people have managed to hit this by accident. As such CVE-2016-6213 was assigned. Ian Kent <raven@themaw.net> described the situation for autofs users as follows: > The number of mounts for direct mount maps is usually not very large because of > the way they are implemented, large direct mount maps can have performance > problems. There can be anywhere from a few (likely case a few hundred) to less > than 10000, plus mounts that have been triggered and not yet expired. > > Indirect mounts have one autofs mount at the root plus the number of mounts that > have been triggered and not yet expired. > > The number of autofs indirect map entries can range from a few to the common > case of several thousand and in rare cases up to between 30000 and 50000. I've > not heard of people with maps larger than 50000 entries. > > The larger the number of map entries the greater the possibility for a large > number of active mounts so it's not hard to expect cases of a 1000 or somewhat > more active mounts. So I am setting the default number of mounts allowed per mount namespace at 100,000. This is more than enough for any use case I know of, but small enough to quickly stop an exponential increase in mounts. Which should be perfect to catch misconfigurations and malfunctioning programs. For anyone who needs a higher limit this can be changed by writing to the new /proc/sys/fs/mount-max sysctl. Tested-by: CAI Qian <caiqian@redhat.com> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2016-09-28 05:27:17 +00:00
static unsigned int m_hash_mask __ro_after_init;
static unsigned int m_hash_shift __ro_after_init;
static unsigned int mp_hash_mask __ro_after_init;
static unsigned int mp_hash_shift __ro_after_init;
static __initdata unsigned long mhash_entries;
static int __init set_mhash_entries(char *str)
{
if (!str)
return 0;
mhash_entries = simple_strtoul(str, &str, 0);
return 1;
}
__setup("mhash_entries=", set_mhash_entries);
static __initdata unsigned long mphash_entries;
static int __init set_mphash_entries(char *str)
{
if (!str)
return 0;
mphash_entries = simple_strtoul(str, &str, 0);
return 1;
}
__setup("mphash_entries=", set_mphash_entries);
static u64 event;
static DEFINE_IDA(mnt_id_ida);
static DEFINE_IDA(mnt_group_ida);
/* Don't allow confusion with old 32bit mount ID */
#define MNT_UNIQUE_ID_OFFSET (1ULL << 31)
static atomic64_t mnt_id_ctr = ATOMIC64_INIT(MNT_UNIQUE_ID_OFFSET);
static struct hlist_head *mount_hashtable __ro_after_init;
static struct hlist_head *mountpoint_hashtable __ro_after_init;
static struct kmem_cache *mnt_cache __ro_after_init;
static DECLARE_RWSEM(namespace_sem);
static HLIST_HEAD(unmounted); /* protected by namespace_sem */
static LIST_HEAD(ex_mountpoints); /* protected by namespace_sem */
static DEFINE_RWLOCK(mnt_ns_tree_lock);
static struct rb_root mnt_ns_tree = RB_ROOT; /* protected by mnt_ns_tree_lock */
fs: add mount_setattr() This implements the missing mount_setattr() syscall. While the new mount api allows to change the properties of a superblock there is currently no way to change the properties of a mount or a mount tree using file descriptors which the new mount api is based on. In addition the old mount api has the restriction that mount options cannot be applied recursively. This hasn't changed since changing mount options on a per-mount basis was implemented in [1] and has been a frequent request not just for convenience but also for security reasons. The legacy mount syscall is unable to accommodate this behavior without introducing a whole new set of flags because MS_REC | MS_REMOUNT | MS_BIND | MS_RDONLY | MS_NOEXEC | [...] only apply the mount option to the topmost mount. Changing MS_REC to apply to the whole mount tree would mean introducing a significant uapi change and would likely cause significant regressions. The new mount_setattr() syscall allows to recursively clear and set mount options in one shot. Multiple calls to change mount options requesting the same changes are idempotent: int mount_setattr(int dfd, const char *path, unsigned flags, struct mount_attr *uattr, size_t usize); Flags to modify path resolution behavior are specified in the @flags argument. Currently, AT_EMPTY_PATH, AT_RECURSIVE, AT_SYMLINK_NOFOLLOW, and AT_NO_AUTOMOUNT are supported. If useful, additional lookup flags to restrict path resolution as introduced with openat2() might be supported in the future. The mount_setattr() syscall can be expected to grow over time and is designed with extensibility in mind. It follows the extensible syscall pattern we have used with other syscalls such as openat2(), clone3(), sched_{set,get}attr(), and others. The set of mount options is passed in the uapi struct mount_attr which currently has the following layout: struct mount_attr { __u64 attr_set; __u64 attr_clr; __u64 propagation; __u64 userns_fd; }; The @attr_set and @attr_clr members are used to clear and set mount options. This way a user can e.g. request that a set of flags is to be raised such as turning mounts readonly by raising MOUNT_ATTR_RDONLY in @attr_set while at the same time requesting that another set of flags is to be lowered such as removing noexec from a mount tree by specifying MOUNT_ATTR_NOEXEC in @attr_clr. Note, since the MOUNT_ATTR_<atime> values are an enum starting from 0, not a bitmap, users wanting to transition to a different atime setting cannot simply specify the atime setting in @attr_set, but must also specify MOUNT_ATTR__ATIME in the @attr_clr field. So we ensure that MOUNT_ATTR__ATIME can't be partially set in @attr_clr and that @attr_set can't have any atime bits set if MOUNT_ATTR__ATIME isn't set in @attr_clr. The @propagation field lets callers specify the propagation type of a mount tree. Propagation is a single property that has four different settings and as such is not really a flag argument but an enum. Specifically, it would be unclear what setting and clearing propagation settings in combination would amount to. The legacy mount() syscall thus forbids the combination of multiple propagation settings too. The goal is to keep the semantics of mount propagation somewhat simple as they are overly complex as it is. The @userns_fd field lets user specify a user namespace whose idmapping becomes the idmapping of the mount. This is implemented and explained in detail in the next patch. [1]: commit 2e4b7fcd9260 ("[PATCH] r/o bind mounts: honor mount writer counts at remount") Link: https://lore.kernel.org/r/20210121131959.646623-35-christian.brauner@ubuntu.com Cc: David Howells <dhowells@redhat.com> Cc: Aleksa Sarai <cyphar@cyphar.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: linux-fsdevel@vger.kernel.org Cc: linux-api@vger.kernel.org Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
2021-01-21 13:19:53 +00:00
struct mount_kattr {
unsigned int attr_set;
unsigned int attr_clr;
unsigned int propagation;
unsigned int lookup_flags;
bool recurse;
fs: introduce MOUNT_ATTR_IDMAP Introduce a new mount bind mount property to allow idmapping mounts. The MOUNT_ATTR_IDMAP flag can be set via the new mount_setattr() syscall together with a file descriptor referring to a user namespace. The user namespace referenced by the namespace file descriptor will be attached to the bind mount. All interactions with the filesystem going through that mount will be mapped according to the mapping specified in the user namespace attached to it. Using user namespaces to mark mounts means we can reuse all the existing infrastructure in the kernel that already exists to handle idmappings and can also use this for permission checking to allow unprivileged user to create idmapped mounts in the future. Idmapping a mount is decoupled from the caller's user and mount namespace. This means idmapped mounts can be created in the initial user namespace which is an important use-case for systemd-homed, portable usb-sticks between systems, sharing data between the initial user namespace and unprivileged containers, and other use-cases that have been brought up. For example, assume a home directory where all files are owned by uid and gid 1000 and the home directory is brought to a new laptop where the user has id 12345. The system administrator can simply create a mount of this home directory with a mapping of 1000:12345:1 and other mappings to indicate the ids should be kept. (With this it is e.g. also possible to create idmapped mounts on the host with an identity mapping 1:1:100000 where the root user is not mapped. A user with root access that e.g. has been pivot rooted into such a mount on the host will be not be able to execute, read, write, or create files as root.) Given that mapping a mount is decoupled from the caller's user namespace a sufficiently privileged process such as a container manager can set up an idmapped mount for the container and the container can simply pivot root to it. There's no need for the container to do anything. The mount will appear correctly mapped independent of the user namespace the container uses. This means we don't need to mark a mount as idmappable. In order to create an idmapped mount the caller must currently be privileged in the user namespace of the superblock the mount belongs to. Once a mount has been idmapped we don't allow it to change its mapping. This keeps permission checking and life-cycle management simple. Users wanting to change the idmapped can always create a new detached mount with a different idmapping. Link: https://lore.kernel.org/r/20210121131959.646623-36-christian.brauner@ubuntu.com Cc: Christoph Hellwig <hch@lst.de> Cc: David Howells <dhowells@redhat.com> Cc: Mauricio Vásquez Bernal <mauricio@kinvolk.io> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: linux-fsdevel@vger.kernel.org Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
2021-01-21 13:19:54 +00:00
struct user_namespace *mnt_userns;
fs: introduce dedicated idmap type for mounts Last cycle we've already made the interaction with idmapped mounts more robust and type safe by introducing the vfs{g,u}id_t type. This cycle we concluded the conversion and removed the legacy helpers. Currently we still pass around the plain namespace that was attached to a mount. This is in general pretty convenient but it makes it easy to conflate filesystem and mount namespaces and what different roles they have to play. Especially for filesystem developers without much experience in this area this is an easy source for bugs. Instead of passing the plain namespace we introduce a dedicated type struct mnt_idmap and replace the pointer with a pointer to a struct mnt_idmap. There are no semantic or size changes for the mount struct caused by this. We then start converting all places aware of idmapped mounts to rely on struct mnt_idmap. Once the conversion is done all helpers down to the really low-level make_vfs{g,u}id() and from_vfs{g,u}id() will take a struct mnt_idmap argument instead of two namespace arguments. This way it becomes impossible to conflate the two, removing and thus eliminating the possibility of any bugs. Fwiw, I fixed some issues in that area a while ago in ntfs3 and ksmbd in the past. Afterwards, only low-level code can ultimately use the associated namespace for any permission checks. Even most of the vfs can be ultimately completely oblivious about this and filesystems will never interact with it directly in any form in the future. A struct mnt_idmap currently encompasses a simple refcount and a pointer to the relevant namespace the mount is idmapped to. If a mount isn't idmapped then it will point to a static nop_mnt_idmap. If it is an idmapped mount it will point to a new struct mnt_idmap. As usual there are no allocations or anything happening for non-idmapped mounts. Everthing is carefully written to be a nop for non-idmapped mounts as has always been the case. If an idmapped mount or mount tree is created a new struct mnt_idmap is allocated and a reference taken on the relevant namespace. For each mount in a mount tree that gets idmapped or a mount that inherits the idmap when it is cloned the reference count on the associated struct mnt_idmap is bumped. Just a reminder that we only allow a mount to change it's idmapping a single time and only if it hasn't already been attached to the filesystems and has no active writers. The actual changes are fairly straightforward. This will have huge benefits for maintenance and security in the long run even if it causes some churn. I'm aware that there's some cost for all of you. And I'll commit to doing this work and make this as painless as I can. Note that this also makes it possible to extend struct mount_idmap in the future. For example, it would be possible to place the namespace pointer in an anonymous union together with an idmapping struct. This would allow us to expose an api to userspace that would let it specify idmappings directly instead of having to go through the detour of setting up namespaces at all. This just adds the infrastructure and doesn't do any conversions. Reviewed-by: Seth Forshee (DigitalOcean) <sforshee@kernel.org> Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
2022-10-26 10:51:27 +00:00
struct mnt_idmap *mnt_idmap;
fs: add mount_setattr() This implements the missing mount_setattr() syscall. While the new mount api allows to change the properties of a superblock there is currently no way to change the properties of a mount or a mount tree using file descriptors which the new mount api is based on. In addition the old mount api has the restriction that mount options cannot be applied recursively. This hasn't changed since changing mount options on a per-mount basis was implemented in [1] and has been a frequent request not just for convenience but also for security reasons. The legacy mount syscall is unable to accommodate this behavior without introducing a whole new set of flags because MS_REC | MS_REMOUNT | MS_BIND | MS_RDONLY | MS_NOEXEC | [...] only apply the mount option to the topmost mount. Changing MS_REC to apply to the whole mount tree would mean introducing a significant uapi change and would likely cause significant regressions. The new mount_setattr() syscall allows to recursively clear and set mount options in one shot. Multiple calls to change mount options requesting the same changes are idempotent: int mount_setattr(int dfd, const char *path, unsigned flags, struct mount_attr *uattr, size_t usize); Flags to modify path resolution behavior are specified in the @flags argument. Currently, AT_EMPTY_PATH, AT_RECURSIVE, AT_SYMLINK_NOFOLLOW, and AT_NO_AUTOMOUNT are supported. If useful, additional lookup flags to restrict path resolution as introduced with openat2() might be supported in the future. The mount_setattr() syscall can be expected to grow over time and is designed with extensibility in mind. It follows the extensible syscall pattern we have used with other syscalls such as openat2(), clone3(), sched_{set,get}attr(), and others. The set of mount options is passed in the uapi struct mount_attr which currently has the following layout: struct mount_attr { __u64 attr_set; __u64 attr_clr; __u64 propagation; __u64 userns_fd; }; The @attr_set and @attr_clr members are used to clear and set mount options. This way a user can e.g. request that a set of flags is to be raised such as turning mounts readonly by raising MOUNT_ATTR_RDONLY in @attr_set while at the same time requesting that another set of flags is to be lowered such as removing noexec from a mount tree by specifying MOUNT_ATTR_NOEXEC in @attr_clr. Note, since the MOUNT_ATTR_<atime> values are an enum starting from 0, not a bitmap, users wanting to transition to a different atime setting cannot simply specify the atime setting in @attr_set, but must also specify MOUNT_ATTR__ATIME in the @attr_clr field. So we ensure that MOUNT_ATTR__ATIME can't be partially set in @attr_clr and that @attr_set can't have any atime bits set if MOUNT_ATTR__ATIME isn't set in @attr_clr. The @propagation field lets callers specify the propagation type of a mount tree. Propagation is a single property that has four different settings and as such is not really a flag argument but an enum. Specifically, it would be unclear what setting and clearing propagation settings in combination would amount to. The legacy mount() syscall thus forbids the combination of multiple propagation settings too. The goal is to keep the semantics of mount propagation somewhat simple as they are overly complex as it is. The @userns_fd field lets user specify a user namespace whose idmapping becomes the idmapping of the mount. This is implemented and explained in detail in the next patch. [1]: commit 2e4b7fcd9260 ("[PATCH] r/o bind mounts: honor mount writer counts at remount") Link: https://lore.kernel.org/r/20210121131959.646623-35-christian.brauner@ubuntu.com Cc: David Howells <dhowells@redhat.com> Cc: Aleksa Sarai <cyphar@cyphar.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: linux-fsdevel@vger.kernel.org Cc: linux-api@vger.kernel.org Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
2021-01-21 13:19:53 +00:00
};
/* /sys/fs */
struct kobject *fs_kobj __ro_after_init;
EXPORT_SYMBOL_GPL(fs_kobj);
/*
* vfsmount lock may be taken for read to prevent changes to the
* vfsmount hash, ie. during mountpoint lookups or walking back
* up the tree.
*
* It should be taken for write in all cases where the vfsmount
* tree or hash is modified or when a vfsmount structure is modified.
*/
RCU'd vfsmounts * RCU-delayed freeing of vfsmounts * vfsmount_lock replaced with a seqlock (mount_lock) * sequence number from mount_lock is stored in nameidata->m_seq and used when we exit RCU mode * new vfsmount flag - MNT_SYNC_UMOUNT. Set by umount_tree() when its caller knows that vfsmount will have no surviving references. * synchronize_rcu() done between unlocking namespace_sem in namespace_unlock() and doing pending mntput(). * new helper: legitimize_mnt(mnt, seq). Checks the mount_lock sequence number against seq, then grabs reference to mnt. Then it rechecks mount_lock again to close the race and either returns success or drops the reference it has acquired. The subtle point is that in case of MNT_SYNC_UMOUNT we can simply decrement the refcount and sod off - aforementioned synchronize_rcu() makes sure that final mntput() won't come until we leave RCU mode. We need that, since we don't want to end up with some lazy pathwalk racing with umount() and stealing the final mntput() from it - caller of umount() may expect it to return only once the fs is shut down and we don't want to break that. In other cases (i.e. with MNT_SYNC_UMOUNT absent) we have to do full-blown mntput() in case of mount_lock sequence number mismatch happening just as we'd grabbed the reference, but in those cases we won't be stealing the final mntput() from anything that would care. * mntput_no_expire() doesn't lock anything on the fast path now. Incidentally, SMP and UP cases are handled the same way - no ifdefs there. * normal pathname resolution does *not* do any writes to mount_lock. It does, of course, bump the refcounts of vfsmount and dentry in the very end, but that's it. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-09-30 02:06:07 +00:00
__cacheline_aligned_in_smp DEFINE_SEQLOCK(mount_lock);
static int mnt_ns_cmp(u64 seq, const struct mnt_namespace *ns)
{
u64 seq_b = ns->seq;
if (seq < seq_b)
return -1;
if (seq > seq_b)
return 1;
return 0;
}
static inline struct mnt_namespace *node_to_mnt_ns(const struct rb_node *node)
{
if (!node)
return NULL;
return rb_entry(node, struct mnt_namespace, mnt_ns_tree_node);
}
static bool mnt_ns_less(struct rb_node *a, const struct rb_node *b)
{
struct mnt_namespace *ns_a = node_to_mnt_ns(a);
struct mnt_namespace *ns_b = node_to_mnt_ns(b);
u64 seq_a = ns_a->seq;
return mnt_ns_cmp(seq_a, ns_b) < 0;
}
static void mnt_ns_tree_add(struct mnt_namespace *ns)
{
guard(write_lock)(&mnt_ns_tree_lock);
rb_add(&ns->mnt_ns_tree_node, &mnt_ns_tree, mnt_ns_less);
}
static void mnt_ns_release(struct mnt_namespace *ns)
{
lockdep_assert_not_held(&mnt_ns_tree_lock);
/* keep alive for {list,stat}mount() */
if (refcount_dec_and_test(&ns->passive)) {
put_user_ns(ns->user_ns);
kfree(ns);
}
}
DEFINE_FREE(mnt_ns_release, struct mnt_namespace *, if (_T) mnt_ns_release(_T))
static void mnt_ns_tree_remove(struct mnt_namespace *ns)
{
/* remove from global mount namespace list */
if (!is_anon_ns(ns)) {
guard(write_lock)(&mnt_ns_tree_lock);
rb_erase(&ns->mnt_ns_tree_node, &mnt_ns_tree);
}
mnt_ns_release(ns);
}
/*
* Returns the mount namespace which either has the specified id, or has the
* next smallest id afer the specified one.
*/
static struct mnt_namespace *mnt_ns_find_id_at(u64 mnt_ns_id)
{
struct rb_node *node = mnt_ns_tree.rb_node;
struct mnt_namespace *ret = NULL;
lockdep_assert_held(&mnt_ns_tree_lock);
while (node) {
struct mnt_namespace *n = node_to_mnt_ns(node);
if (mnt_ns_id <= n->seq) {
ret = node_to_mnt_ns(node);
if (mnt_ns_id == n->seq)
break;
node = node->rb_left;
} else {
node = node->rb_right;
}
}
return ret;
}
/*
* Lookup a mount namespace by id and take a passive reference count. Taking a
* passive reference means the mount namespace can be emptied if e.g., the last
* task holding an active reference exits. To access the mounts of the
* namespace the @namespace_sem must first be acquired. If the namespace has
* already shut down before acquiring @namespace_sem, {list,stat}mount() will
* see that the mount rbtree of the namespace is empty.
*/
static struct mnt_namespace *lookup_mnt_ns(u64 mnt_ns_id)
{
struct mnt_namespace *ns;
guard(read_lock)(&mnt_ns_tree_lock);
ns = mnt_ns_find_id_at(mnt_ns_id);
if (!ns || ns->seq != mnt_ns_id)
return NULL;
refcount_inc(&ns->passive);
return ns;
}
static inline void lock_mount_hash(void)
{
write_seqlock(&mount_lock);
}
static inline void unlock_mount_hash(void)
{
write_sequnlock(&mount_lock);
}
static inline struct hlist_head *m_hash(struct vfsmount *mnt, struct dentry *dentry)
{
unsigned long tmp = ((unsigned long)mnt / L1_CACHE_BYTES);
tmp += ((unsigned long)dentry / L1_CACHE_BYTES);
tmp = tmp + (tmp >> m_hash_shift);
return &mount_hashtable[tmp & m_hash_mask];
}
static inline struct hlist_head *mp_hash(struct dentry *dentry)
{
unsigned long tmp = ((unsigned long)dentry / L1_CACHE_BYTES);
tmp = tmp + (tmp >> mp_hash_shift);
return &mountpoint_hashtable[tmp & mp_hash_mask];
}
static int mnt_alloc_id(struct mount *mnt)
{
int res = ida_alloc(&mnt_id_ida, GFP_KERNEL);
if (res < 0)
return res;
mnt->mnt_id = res;
mnt->mnt_id_unique = atomic64_inc_return(&mnt_id_ctr);
return 0;
}
static void mnt_free_id(struct mount *mnt)
{
ida_free(&mnt_id_ida, mnt->mnt_id);
}
/*
* Allocate a new peer group ID
*/
static int mnt_alloc_group_id(struct mount *mnt)
{
int res = ida_alloc_min(&mnt_group_ida, 1, GFP_KERNEL);
if (res < 0)
return res;
mnt->mnt_group_id = res;
return 0;
}
/*
* Release a peer group ID
*/
void mnt_release_group_id(struct mount *mnt)
{
ida_free(&mnt_group_ida, mnt->mnt_group_id);
mnt->mnt_group_id = 0;
}
fs: scale mntget/mntput The problem that this patch aims to fix is vfsmount refcounting scalability. We need to take a reference on the vfsmount for every successful path lookup, which often go to the same mount point. The fundamental difficulty is that a "simple" reference count can never be made scalable, because any time a reference is dropped, we must check whether that was the last reference. To do that requires communication with all other CPUs that may have taken a reference count. We can make refcounts more scalable in a couple of ways, involving keeping distributed counters, and checking for the global-zero condition less frequently. - check the global sum once every interval (this will delay zero detection for some interval, so it's probably a showstopper for vfsmounts). - keep a local count and only taking the global sum when local reaches 0 (this is difficult for vfsmounts, because we can't hold preempt off for the life of a reference, so a counter would need to be per-thread or tied strongly to a particular CPU which requires more locking). - keep a local difference of increments and decrements, which allows us to sum the total difference and hence find the refcount when summing all CPUs. Then, keep a single integer "long" refcount for slow and long lasting references, and only take the global sum of local counters when the long refcount is 0. This last scheme is what I implemented here. Attached mounts and process root and working directory references are "long" references, and everything else is a short reference. This allows scalable vfsmount references during path walking over mounted subtrees and unattached (lazy umounted) mounts with processes still running in them. This results in one fewer atomic op in the fastpath: mntget is now just a per-CPU inc, rather than an atomic inc; and mntput just requires a spinlock and non-atomic decrement in the common case. However code is otherwise bigger and heavier, so single threaded performance is basically a wash. Signed-off-by: Nick Piggin <npiggin@kernel.dk>
2011-01-07 06:50:11 +00:00
/*
* vfsmount lock must be held for read
*/
static inline void mnt_add_count(struct mount *mnt, int n)
fs: scale mntget/mntput The problem that this patch aims to fix is vfsmount refcounting scalability. We need to take a reference on the vfsmount for every successful path lookup, which often go to the same mount point. The fundamental difficulty is that a "simple" reference count can never be made scalable, because any time a reference is dropped, we must check whether that was the last reference. To do that requires communication with all other CPUs that may have taken a reference count. We can make refcounts more scalable in a couple of ways, involving keeping distributed counters, and checking for the global-zero condition less frequently. - check the global sum once every interval (this will delay zero detection for some interval, so it's probably a showstopper for vfsmounts). - keep a local count and only taking the global sum when local reaches 0 (this is difficult for vfsmounts, because we can't hold preempt off for the life of a reference, so a counter would need to be per-thread or tied strongly to a particular CPU which requires more locking). - keep a local difference of increments and decrements, which allows us to sum the total difference and hence find the refcount when summing all CPUs. Then, keep a single integer "long" refcount for slow and long lasting references, and only take the global sum of local counters when the long refcount is 0. This last scheme is what I implemented here. Attached mounts and process root and working directory references are "long" references, and everything else is a short reference. This allows scalable vfsmount references during path walking over mounted subtrees and unattached (lazy umounted) mounts with processes still running in them. This results in one fewer atomic op in the fastpath: mntget is now just a per-CPU inc, rather than an atomic inc; and mntput just requires a spinlock and non-atomic decrement in the common case. However code is otherwise bigger and heavier, so single threaded performance is basically a wash. Signed-off-by: Nick Piggin <npiggin@kernel.dk>
2011-01-07 06:50:11 +00:00
{
#ifdef CONFIG_SMP
this_cpu_add(mnt->mnt_pcp->mnt_count, n);
fs: scale mntget/mntput The problem that this patch aims to fix is vfsmount refcounting scalability. We need to take a reference on the vfsmount for every successful path lookup, which often go to the same mount point. The fundamental difficulty is that a "simple" reference count can never be made scalable, because any time a reference is dropped, we must check whether that was the last reference. To do that requires communication with all other CPUs that may have taken a reference count. We can make refcounts more scalable in a couple of ways, involving keeping distributed counters, and checking for the global-zero condition less frequently. - check the global sum once every interval (this will delay zero detection for some interval, so it's probably a showstopper for vfsmounts). - keep a local count and only taking the global sum when local reaches 0 (this is difficult for vfsmounts, because we can't hold preempt off for the life of a reference, so a counter would need to be per-thread or tied strongly to a particular CPU which requires more locking). - keep a local difference of increments and decrements, which allows us to sum the total difference and hence find the refcount when summing all CPUs. Then, keep a single integer "long" refcount for slow and long lasting references, and only take the global sum of local counters when the long refcount is 0. This last scheme is what I implemented here. Attached mounts and process root and working directory references are "long" references, and everything else is a short reference. This allows scalable vfsmount references during path walking over mounted subtrees and unattached (lazy umounted) mounts with processes still running in them. This results in one fewer atomic op in the fastpath: mntget is now just a per-CPU inc, rather than an atomic inc; and mntput just requires a spinlock and non-atomic decrement in the common case. However code is otherwise bigger and heavier, so single threaded performance is basically a wash. Signed-off-by: Nick Piggin <npiggin@kernel.dk>
2011-01-07 06:50:11 +00:00
#else
preempt_disable();
mnt->mnt_count += n;
fs: scale mntget/mntput The problem that this patch aims to fix is vfsmount refcounting scalability. We need to take a reference on the vfsmount for every successful path lookup, which often go to the same mount point. The fundamental difficulty is that a "simple" reference count can never be made scalable, because any time a reference is dropped, we must check whether that was the last reference. To do that requires communication with all other CPUs that may have taken a reference count. We can make refcounts more scalable in a couple of ways, involving keeping distributed counters, and checking for the global-zero condition less frequently. - check the global sum once every interval (this will delay zero detection for some interval, so it's probably a showstopper for vfsmounts). - keep a local count and only taking the global sum when local reaches 0 (this is difficult for vfsmounts, because we can't hold preempt off for the life of a reference, so a counter would need to be per-thread or tied strongly to a particular CPU which requires more locking). - keep a local difference of increments and decrements, which allows us to sum the total difference and hence find the refcount when summing all CPUs. Then, keep a single integer "long" refcount for slow and long lasting references, and only take the global sum of local counters when the long refcount is 0. This last scheme is what I implemented here. Attached mounts and process root and working directory references are "long" references, and everything else is a short reference. This allows scalable vfsmount references during path walking over mounted subtrees and unattached (lazy umounted) mounts with processes still running in them. This results in one fewer atomic op in the fastpath: mntget is now just a per-CPU inc, rather than an atomic inc; and mntput just requires a spinlock and non-atomic decrement in the common case. However code is otherwise bigger and heavier, so single threaded performance is basically a wash. Signed-off-by: Nick Piggin <npiggin@kernel.dk>
2011-01-07 06:50:11 +00:00
preempt_enable();
#endif
}
/*
* vfsmount lock must be held for write
*/
int mnt_get_count(struct mount *mnt)
fs: scale mntget/mntput The problem that this patch aims to fix is vfsmount refcounting scalability. We need to take a reference on the vfsmount for every successful path lookup, which often go to the same mount point. The fundamental difficulty is that a "simple" reference count can never be made scalable, because any time a reference is dropped, we must check whether that was the last reference. To do that requires communication with all other CPUs that may have taken a reference count. We can make refcounts more scalable in a couple of ways, involving keeping distributed counters, and checking for the global-zero condition less frequently. - check the global sum once every interval (this will delay zero detection for some interval, so it's probably a showstopper for vfsmounts). - keep a local count and only taking the global sum when local reaches 0 (this is difficult for vfsmounts, because we can't hold preempt off for the life of a reference, so a counter would need to be per-thread or tied strongly to a particular CPU which requires more locking). - keep a local difference of increments and decrements, which allows us to sum the total difference and hence find the refcount when summing all CPUs. Then, keep a single integer "long" refcount for slow and long lasting references, and only take the global sum of local counters when the long refcount is 0. This last scheme is what I implemented here. Attached mounts and process root and working directory references are "long" references, and everything else is a short reference. This allows scalable vfsmount references during path walking over mounted subtrees and unattached (lazy umounted) mounts with processes still running in them. This results in one fewer atomic op in the fastpath: mntget is now just a per-CPU inc, rather than an atomic inc; and mntput just requires a spinlock and non-atomic decrement in the common case. However code is otherwise bigger and heavier, so single threaded performance is basically a wash. Signed-off-by: Nick Piggin <npiggin@kernel.dk>
2011-01-07 06:50:11 +00:00
{
#ifdef CONFIG_SMP
int count = 0;
fs: scale mntget/mntput The problem that this patch aims to fix is vfsmount refcounting scalability. We need to take a reference on the vfsmount for every successful path lookup, which often go to the same mount point. The fundamental difficulty is that a "simple" reference count can never be made scalable, because any time a reference is dropped, we must check whether that was the last reference. To do that requires communication with all other CPUs that may have taken a reference count. We can make refcounts more scalable in a couple of ways, involving keeping distributed counters, and checking for the global-zero condition less frequently. - check the global sum once every interval (this will delay zero detection for some interval, so it's probably a showstopper for vfsmounts). - keep a local count and only taking the global sum when local reaches 0 (this is difficult for vfsmounts, because we can't hold preempt off for the life of a reference, so a counter would need to be per-thread or tied strongly to a particular CPU which requires more locking). - keep a local difference of increments and decrements, which allows us to sum the total difference and hence find the refcount when summing all CPUs. Then, keep a single integer "long" refcount for slow and long lasting references, and only take the global sum of local counters when the long refcount is 0. This last scheme is what I implemented here. Attached mounts and process root and working directory references are "long" references, and everything else is a short reference. This allows scalable vfsmount references during path walking over mounted subtrees and unattached (lazy umounted) mounts with processes still running in them. This results in one fewer atomic op in the fastpath: mntget is now just a per-CPU inc, rather than an atomic inc; and mntput just requires a spinlock and non-atomic decrement in the common case. However code is otherwise bigger and heavier, so single threaded performance is basically a wash. Signed-off-by: Nick Piggin <npiggin@kernel.dk>
2011-01-07 06:50:11 +00:00
int cpu;
for_each_possible_cpu(cpu) {
count += per_cpu_ptr(mnt->mnt_pcp, cpu)->mnt_count;
fs: scale mntget/mntput The problem that this patch aims to fix is vfsmount refcounting scalability. We need to take a reference on the vfsmount for every successful path lookup, which often go to the same mount point. The fundamental difficulty is that a "simple" reference count can never be made scalable, because any time a reference is dropped, we must check whether that was the last reference. To do that requires communication with all other CPUs that may have taken a reference count. We can make refcounts more scalable in a couple of ways, involving keeping distributed counters, and checking for the global-zero condition less frequently. - check the global sum once every interval (this will delay zero detection for some interval, so it's probably a showstopper for vfsmounts). - keep a local count and only taking the global sum when local reaches 0 (this is difficult for vfsmounts, because we can't hold preempt off for the life of a reference, so a counter would need to be per-thread or tied strongly to a particular CPU which requires more locking). - keep a local difference of increments and decrements, which allows us to sum the total difference and hence find the refcount when summing all CPUs. Then, keep a single integer "long" refcount for slow and long lasting references, and only take the global sum of local counters when the long refcount is 0. This last scheme is what I implemented here. Attached mounts and process root and working directory references are "long" references, and everything else is a short reference. This allows scalable vfsmount references during path walking over mounted subtrees and unattached (lazy umounted) mounts with processes still running in them. This results in one fewer atomic op in the fastpath: mntget is now just a per-CPU inc, rather than an atomic inc; and mntput just requires a spinlock and non-atomic decrement in the common case. However code is otherwise bigger and heavier, so single threaded performance is basically a wash. Signed-off-by: Nick Piggin <npiggin@kernel.dk>
2011-01-07 06:50:11 +00:00
}
return count;
#else
return mnt->mnt_count;
fs: scale mntget/mntput The problem that this patch aims to fix is vfsmount refcounting scalability. We need to take a reference on the vfsmount for every successful path lookup, which often go to the same mount point. The fundamental difficulty is that a "simple" reference count can never be made scalable, because any time a reference is dropped, we must check whether that was the last reference. To do that requires communication with all other CPUs that may have taken a reference count. We can make refcounts more scalable in a couple of ways, involving keeping distributed counters, and checking for the global-zero condition less frequently. - check the global sum once every interval (this will delay zero detection for some interval, so it's probably a showstopper for vfsmounts). - keep a local count and only taking the global sum when local reaches 0 (this is difficult for vfsmounts, because we can't hold preempt off for the life of a reference, so a counter would need to be per-thread or tied strongly to a particular CPU which requires more locking). - keep a local difference of increments and decrements, which allows us to sum the total difference and hence find the refcount when summing all CPUs. Then, keep a single integer "long" refcount for slow and long lasting references, and only take the global sum of local counters when the long refcount is 0. This last scheme is what I implemented here. Attached mounts and process root and working directory references are "long" references, and everything else is a short reference. This allows scalable vfsmount references during path walking over mounted subtrees and unattached (lazy umounted) mounts with processes still running in them. This results in one fewer atomic op in the fastpath: mntget is now just a per-CPU inc, rather than an atomic inc; and mntput just requires a spinlock and non-atomic decrement in the common case. However code is otherwise bigger and heavier, so single threaded performance is basically a wash. Signed-off-by: Nick Piggin <npiggin@kernel.dk>
2011-01-07 06:50:11 +00:00
#endif
}
static struct mount *alloc_vfsmnt(const char *name)
{
struct mount *mnt = kmem_cache_zalloc(mnt_cache, GFP_KERNEL);
if (mnt) {
int err;
err = mnt_alloc_id(mnt);
if (err)
goto out_free_cache;
if (name) {
memcg: enable accounting for mnt_cache entries Patch series "memcg accounting from OpenVZ", v7. OpenVZ uses memory accounting 20+ years since v2.2.x linux kernels. Initially we used our own accounting subsystem, then partially committed it to upstream, and a few years ago switched to cgroups v1. Now we're rebasing again, revising our old patches and trying to push them upstream. We try to protect the host system from any misuse of kernel memory allocation triggered by untrusted users inside the containers. Patch-set is addressed mostly to cgroups maintainers and cgroups@ mailing list, though I would be very grateful for any comments from maintainersi of affected subsystems or other people added in cc: Compared to the upstream, we additionally account the following kernel objects: - network devices and its Tx/Rx queues - ipv4/v6 addresses and routing-related objects - inet_bind_bucket cache objects - VLAN group arrays - ipv6/sit: ip_tunnel_prl - scm_fp_list objects used by SCM_RIGHTS messages of Unix sockets - nsproxy and namespace objects itself - IPC objects: semaphores, message queues and share memory segments - mounts - pollfd and select bits arrays - signals and posix timers - file lock - fasync_struct used by the file lease code and driver's fasync queues - tty objects - per-mm LDT We have an incorrect/incomplete/obsoleted accounting for few other kernel objects: sk_filter, af_packets, netlink and xt_counters for iptables. They require rework and probably will be dropped at all. Also we're going to add an accounting for nft, however it is not ready yet. We have not tested performance on upstream, however, our performance team compares our current RHEL7-based production kernel and reports that they are at least not worse as the according original RHEL7 kernel. This patch (of 10): The kernel allocates ~400 bytes of 'struct mount' for any new mount. Creating a new mount namespace clones most of the parent mounts, and this can be repeated many times. Additionally, each mount allocates up to PATH_MAX=4096 bytes for mnt->mnt_devname. It makes sense to account for these allocations to restrict the host's memory consumption from inside the memcg-limited container. Link: https://lkml.kernel.org/r/045db11f-4a45-7c9b-2664-5b32c2b44943@virtuozzo.com Signed-off-by: Vasily Averin <vvs@virtuozzo.com> Reviewed-by: Shakeel Butt <shakeelb@google.com> Acked-by: Christian Brauner <christian.brauner@ubuntu.com> Cc: Tejun Heo <tj@kernel.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Roman Gushchin <guro@fb.com> Cc: Yutian Yang <nglaive@gmail.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Andrei Vagin <avagin@gmail.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Dmitry Safonov <0x7f454c46@gmail.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: "J. Bruce Fields" <bfields@fieldses.org> Cc: Jeff Layton <jlayton@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jiri Slaby <jirislaby@kernel.org> Cc: Kirill Tkhai <ktkhai@virtuozzo.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Serge Hallyn <serge@hallyn.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Zefan Li <lizefan.x@bytedance.com> Cc: Borislav Petkov <bp@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-02 21:55:10 +00:00
mnt->mnt_devname = kstrdup_const(name,
GFP_KERNEL_ACCOUNT);
if (!mnt->mnt_devname)
goto out_free_id;
}
fs: scale mntget/mntput The problem that this patch aims to fix is vfsmount refcounting scalability. We need to take a reference on the vfsmount for every successful path lookup, which often go to the same mount point. The fundamental difficulty is that a "simple" reference count can never be made scalable, because any time a reference is dropped, we must check whether that was the last reference. To do that requires communication with all other CPUs that may have taken a reference count. We can make refcounts more scalable in a couple of ways, involving keeping distributed counters, and checking for the global-zero condition less frequently. - check the global sum once every interval (this will delay zero detection for some interval, so it's probably a showstopper for vfsmounts). - keep a local count and only taking the global sum when local reaches 0 (this is difficult for vfsmounts, because we can't hold preempt off for the life of a reference, so a counter would need to be per-thread or tied strongly to a particular CPU which requires more locking). - keep a local difference of increments and decrements, which allows us to sum the total difference and hence find the refcount when summing all CPUs. Then, keep a single integer "long" refcount for slow and long lasting references, and only take the global sum of local counters when the long refcount is 0. This last scheme is what I implemented here. Attached mounts and process root and working directory references are "long" references, and everything else is a short reference. This allows scalable vfsmount references during path walking over mounted subtrees and unattached (lazy umounted) mounts with processes still running in them. This results in one fewer atomic op in the fastpath: mntget is now just a per-CPU inc, rather than an atomic inc; and mntput just requires a spinlock and non-atomic decrement in the common case. However code is otherwise bigger and heavier, so single threaded performance is basically a wash. Signed-off-by: Nick Piggin <npiggin@kernel.dk>
2011-01-07 06:50:11 +00:00
#ifdef CONFIG_SMP
mnt->mnt_pcp = alloc_percpu(struct mnt_pcp);
if (!mnt->mnt_pcp)
fs: scale mntget/mntput The problem that this patch aims to fix is vfsmount refcounting scalability. We need to take a reference on the vfsmount for every successful path lookup, which often go to the same mount point. The fundamental difficulty is that a "simple" reference count can never be made scalable, because any time a reference is dropped, we must check whether that was the last reference. To do that requires communication with all other CPUs that may have taken a reference count. We can make refcounts more scalable in a couple of ways, involving keeping distributed counters, and checking for the global-zero condition less frequently. - check the global sum once every interval (this will delay zero detection for some interval, so it's probably a showstopper for vfsmounts). - keep a local count and only taking the global sum when local reaches 0 (this is difficult for vfsmounts, because we can't hold preempt off for the life of a reference, so a counter would need to be per-thread or tied strongly to a particular CPU which requires more locking). - keep a local difference of increments and decrements, which allows us to sum the total difference and hence find the refcount when summing all CPUs. Then, keep a single integer "long" refcount for slow and long lasting references, and only take the global sum of local counters when the long refcount is 0. This last scheme is what I implemented here. Attached mounts and process root and working directory references are "long" references, and everything else is a short reference. This allows scalable vfsmount references during path walking over mounted subtrees and unattached (lazy umounted) mounts with processes still running in them. This results in one fewer atomic op in the fastpath: mntget is now just a per-CPU inc, rather than an atomic inc; and mntput just requires a spinlock and non-atomic decrement in the common case. However code is otherwise bigger and heavier, so single threaded performance is basically a wash. Signed-off-by: Nick Piggin <npiggin@kernel.dk>
2011-01-07 06:50:11 +00:00
goto out_free_devname;
this_cpu_add(mnt->mnt_pcp->mnt_count, 1);
fs: scale mntget/mntput The problem that this patch aims to fix is vfsmount refcounting scalability. We need to take a reference on the vfsmount for every successful path lookup, which often go to the same mount point. The fundamental difficulty is that a "simple" reference count can never be made scalable, because any time a reference is dropped, we must check whether that was the last reference. To do that requires communication with all other CPUs that may have taken a reference count. We can make refcounts more scalable in a couple of ways, involving keeping distributed counters, and checking for the global-zero condition less frequently. - check the global sum once every interval (this will delay zero detection for some interval, so it's probably a showstopper for vfsmounts). - keep a local count and only taking the global sum when local reaches 0 (this is difficult for vfsmounts, because we can't hold preempt off for the life of a reference, so a counter would need to be per-thread or tied strongly to a particular CPU which requires more locking). - keep a local difference of increments and decrements, which allows us to sum the total difference and hence find the refcount when summing all CPUs. Then, keep a single integer "long" refcount for slow and long lasting references, and only take the global sum of local counters when the long refcount is 0. This last scheme is what I implemented here. Attached mounts and process root and working directory references are "long" references, and everything else is a short reference. This allows scalable vfsmount references during path walking over mounted subtrees and unattached (lazy umounted) mounts with processes still running in them. This results in one fewer atomic op in the fastpath: mntget is now just a per-CPU inc, rather than an atomic inc; and mntput just requires a spinlock and non-atomic decrement in the common case. However code is otherwise bigger and heavier, so single threaded performance is basically a wash. Signed-off-by: Nick Piggin <npiggin@kernel.dk>
2011-01-07 06:50:11 +00:00
#else
mnt->mnt_count = 1;
mnt->mnt_writers = 0;
fs: scale mntget/mntput The problem that this patch aims to fix is vfsmount refcounting scalability. We need to take a reference on the vfsmount for every successful path lookup, which often go to the same mount point. The fundamental difficulty is that a "simple" reference count can never be made scalable, because any time a reference is dropped, we must check whether that was the last reference. To do that requires communication with all other CPUs that may have taken a reference count. We can make refcounts more scalable in a couple of ways, involving keeping distributed counters, and checking for the global-zero condition less frequently. - check the global sum once every interval (this will delay zero detection for some interval, so it's probably a showstopper for vfsmounts). - keep a local count and only taking the global sum when local reaches 0 (this is difficult for vfsmounts, because we can't hold preempt off for the life of a reference, so a counter would need to be per-thread or tied strongly to a particular CPU which requires more locking). - keep a local difference of increments and decrements, which allows us to sum the total difference and hence find the refcount when summing all CPUs. Then, keep a single integer "long" refcount for slow and long lasting references, and only take the global sum of local counters when the long refcount is 0. This last scheme is what I implemented here. Attached mounts and process root and working directory references are "long" references, and everything else is a short reference. This allows scalable vfsmount references during path walking over mounted subtrees and unattached (lazy umounted) mounts with processes still running in them. This results in one fewer atomic op in the fastpath: mntget is now just a per-CPU inc, rather than an atomic inc; and mntput just requires a spinlock and non-atomic decrement in the common case. However code is otherwise bigger and heavier, so single threaded performance is basically a wash. Signed-off-by: Nick Piggin <npiggin@kernel.dk>
2011-01-07 06:50:11 +00:00
#endif
INIT_HLIST_NODE(&mnt->mnt_hash);
INIT_LIST_HEAD(&mnt->mnt_child);
INIT_LIST_HEAD(&mnt->mnt_mounts);
INIT_LIST_HEAD(&mnt->mnt_list);
INIT_LIST_HEAD(&mnt->mnt_expire);
INIT_LIST_HEAD(&mnt->mnt_share);
INIT_LIST_HEAD(&mnt->mnt_slave_list);
INIT_LIST_HEAD(&mnt->mnt_slave);
INIT_HLIST_NODE(&mnt->mnt_mp_list);
mnt: In propgate_umount handle visiting mounts in any order While investigating some poor umount performance I realized that in the case of overlapping mount trees where some of the mounts are locked the code has been failing to unmount all of the mounts it should have been unmounting. This failure to unmount all of the necessary mounts can be reproduced with: $ cat locked_mounts_test.sh mount -t tmpfs test-base /mnt mount --make-shared /mnt mkdir -p /mnt/b mount -t tmpfs test1 /mnt/b mount --make-shared /mnt/b mkdir -p /mnt/b/10 mount -t tmpfs test2 /mnt/b/10 mount --make-shared /mnt/b/10 mkdir -p /mnt/b/10/20 mount --rbind /mnt/b /mnt/b/10/20 unshare -Urm --propagation unchaged /bin/sh -c 'sleep 5; if [ $(grep test /proc/self/mountinfo | wc -l) -eq 1 ] ; then echo SUCCESS ; else echo FAILURE ; fi' sleep 1 umount -l /mnt/b wait %% $ unshare -Urm ./locked_mounts_test.sh This failure is corrected by removing the prepass that marks mounts that may be umounted. A first pass is added that umounts mounts if possible and if not sets mount mark if they could be unmounted if they weren't locked and adds them to a list to umount possibilities. This first pass reconsiders the mounts parent if it is on the list of umount possibilities, ensuring that information of umoutability will pass from child to mount parent. A second pass then walks through all mounts that are umounted and processes their children unmounting them or marking them for reparenting. A last pass cleans up the state on the mounts that could not be umounted and if applicable reparents them to their first parent that remained mounted. While a bit longer than the old code this code is much more robust as it allows information to flow up from the leaves and down from the trunk making the order in which mounts are encountered in the umount propgation tree irrelevant. Cc: stable@vger.kernel.org Fixes: 0c56fe31420c ("mnt: Don't propagate unmounts to locked mounts") Reviewed-by: Andrei Vagin <avagin@virtuozzo.com> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2016-10-24 21:16:13 +00:00
INIT_LIST_HEAD(&mnt->mnt_umounting);
INIT_HLIST_HEAD(&mnt->mnt_stuck_children);
fs: introduce dedicated idmap type for mounts Last cycle we've already made the interaction with idmapped mounts more robust and type safe by introducing the vfs{g,u}id_t type. This cycle we concluded the conversion and removed the legacy helpers. Currently we still pass around the plain namespace that was attached to a mount. This is in general pretty convenient but it makes it easy to conflate filesystem and mount namespaces and what different roles they have to play. Especially for filesystem developers without much experience in this area this is an easy source for bugs. Instead of passing the plain namespace we introduce a dedicated type struct mnt_idmap and replace the pointer with a pointer to a struct mnt_idmap. There are no semantic or size changes for the mount struct caused by this. We then start converting all places aware of idmapped mounts to rely on struct mnt_idmap. Once the conversion is done all helpers down to the really low-level make_vfs{g,u}id() and from_vfs{g,u}id() will take a struct mnt_idmap argument instead of two namespace arguments. This way it becomes impossible to conflate the two, removing and thus eliminating the possibility of any bugs. Fwiw, I fixed some issues in that area a while ago in ntfs3 and ksmbd in the past. Afterwards, only low-level code can ultimately use the associated namespace for any permission checks. Even most of the vfs can be ultimately completely oblivious about this and filesystems will never interact with it directly in any form in the future. A struct mnt_idmap currently encompasses a simple refcount and a pointer to the relevant namespace the mount is idmapped to. If a mount isn't idmapped then it will point to a static nop_mnt_idmap. If it is an idmapped mount it will point to a new struct mnt_idmap. As usual there are no allocations or anything happening for non-idmapped mounts. Everthing is carefully written to be a nop for non-idmapped mounts as has always been the case. If an idmapped mount or mount tree is created a new struct mnt_idmap is allocated and a reference taken on the relevant namespace. For each mount in a mount tree that gets idmapped or a mount that inherits the idmap when it is cloned the reference count on the associated struct mnt_idmap is bumped. Just a reminder that we only allow a mount to change it's idmapping a single time and only if it hasn't already been attached to the filesystems and has no active writers. The actual changes are fairly straightforward. This will have huge benefits for maintenance and security in the long run even if it causes some churn. I'm aware that there's some cost for all of you. And I'll commit to doing this work and make this as painless as I can. Note that this also makes it possible to extend struct mount_idmap in the future. For example, it would be possible to place the namespace pointer in an anonymous union together with an idmapping struct. This would allow us to expose an api to userspace that would let it specify idmappings directly instead of having to go through the detour of setting up namespaces at all. This just adds the infrastructure and doesn't do any conversions. Reviewed-by: Seth Forshee (DigitalOcean) <sforshee@kernel.org> Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
2022-10-26 10:51:27 +00:00
mnt->mnt.mnt_idmap = &nop_mnt_idmap;
}
return mnt;
#ifdef CONFIG_SMP
out_free_devname:
kfree_const(mnt->mnt_devname);
#endif
out_free_id:
mnt_free_id(mnt);
out_free_cache:
kmem_cache_free(mnt_cache, mnt);
return NULL;
}
[PATCH] r/o bind mounts: track numbers of writers to mounts This is the real meat of the entire series. It actually implements the tracking of the number of writers to a mount. However, it causes scalability problems because there can be hundreds of cpus doing open()/close() on files on the same mnt at the same time. Even an atomic_t in the mnt has massive scalaing problems because the cacheline gets so terribly contended. This uses a statically-allocated percpu variable. All want/drop operations are local to a cpu as long that cpu operates on the same mount, and there are no writer count imbalances. Writer count imbalances happen when a write is taken on one cpu, and released on another, like when an open/close pair is performed on two Upon a remount,ro request, all of the data from the percpu variables is collected (expensive, but very rare) and we determine if there are any outstanding writers to the mount. I've written a little benchmark to sit in a loop for a couple of seconds in several cpus in parallel doing open/write/close loops. http://sr71.net/~dave/linux/openbench.c The code in here is a a worst-possible case for this patch. It does opens on a _pair_ of files in two different mounts in parallel. This should cause my code to lose its "operate on the same mount" optimization completely. This worst-case scenario causes a 3% degredation in the benchmark. I could probably get rid of even this 3%, but it would be more complex than what I have here, and I think this is getting into acceptable territory. In practice, I expect writing more than 3 bytes to a file, as well as disk I/O to mask any effects that this has. (To get rid of that 3%, we could have an #defined number of mounts in the percpu variable. So, instead of a CPU getting operate only on percpu data when it accesses only one mount, it could stay on percpu data when it only accesses N or fewer mounts.) [AV] merged fix for __clear_mnt_mount() stepping on freed vfsmount Acked-by: Al Viro <viro@ZenIV.linux.org.uk> Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Dave Hansen <haveblue@us.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-02-15 22:37:59 +00:00
/*
* Most r/o checks on a fs are for operations that take
* discrete amounts of time, like a write() or unlink().
* We must keep track of when those operations start
* (for permission checks) and when they end, so that
* we can determine when writes are able to occur to
* a filesystem.
*/
/*
* __mnt_is_readonly: check whether a mount is read-only
* @mnt: the mount to check for its write status
*
* This shouldn't be used directly ouside of the VFS.
* It does not guarantee that the filesystem will stay
* r/w, just that it is right *now*. This can not and
* should not be used in place of IS_RDONLY(inode).
* mnt_want/drop_write() will _keep_ the filesystem
* r/w.
*/
bool __mnt_is_readonly(struct vfsmount *mnt)
[PATCH] r/o bind mounts: track numbers of writers to mounts This is the real meat of the entire series. It actually implements the tracking of the number of writers to a mount. However, it causes scalability problems because there can be hundreds of cpus doing open()/close() on files on the same mnt at the same time. Even an atomic_t in the mnt has massive scalaing problems because the cacheline gets so terribly contended. This uses a statically-allocated percpu variable. All want/drop operations are local to a cpu as long that cpu operates on the same mount, and there are no writer count imbalances. Writer count imbalances happen when a write is taken on one cpu, and released on another, like when an open/close pair is performed on two Upon a remount,ro request, all of the data from the percpu variables is collected (expensive, but very rare) and we determine if there are any outstanding writers to the mount. I've written a little benchmark to sit in a loop for a couple of seconds in several cpus in parallel doing open/write/close loops. http://sr71.net/~dave/linux/openbench.c The code in here is a a worst-possible case for this patch. It does opens on a _pair_ of files in two different mounts in parallel. This should cause my code to lose its "operate on the same mount" optimization completely. This worst-case scenario causes a 3% degredation in the benchmark. I could probably get rid of even this 3%, but it would be more complex than what I have here, and I think this is getting into acceptable territory. In practice, I expect writing more than 3 bytes to a file, as well as disk I/O to mask any effects that this has. (To get rid of that 3%, we could have an #defined number of mounts in the percpu variable. So, instead of a CPU getting operate only on percpu data when it accesses only one mount, it could stay on percpu data when it only accesses N or fewer mounts.) [AV] merged fix for __clear_mnt_mount() stepping on freed vfsmount Acked-by: Al Viro <viro@ZenIV.linux.org.uk> Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Dave Hansen <haveblue@us.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-02-15 22:37:59 +00:00
{
return (mnt->mnt_flags & MNT_READONLY) || sb_rdonly(mnt->mnt_sb);
[PATCH] r/o bind mounts: track numbers of writers to mounts This is the real meat of the entire series. It actually implements the tracking of the number of writers to a mount. However, it causes scalability problems because there can be hundreds of cpus doing open()/close() on files on the same mnt at the same time. Even an atomic_t in the mnt has massive scalaing problems because the cacheline gets so terribly contended. This uses a statically-allocated percpu variable. All want/drop operations are local to a cpu as long that cpu operates on the same mount, and there are no writer count imbalances. Writer count imbalances happen when a write is taken on one cpu, and released on another, like when an open/close pair is performed on two Upon a remount,ro request, all of the data from the percpu variables is collected (expensive, but very rare) and we determine if there are any outstanding writers to the mount. I've written a little benchmark to sit in a loop for a couple of seconds in several cpus in parallel doing open/write/close loops. http://sr71.net/~dave/linux/openbench.c The code in here is a a worst-possible case for this patch. It does opens on a _pair_ of files in two different mounts in parallel. This should cause my code to lose its "operate on the same mount" optimization completely. This worst-case scenario causes a 3% degredation in the benchmark. I could probably get rid of even this 3%, but it would be more complex than what I have here, and I think this is getting into acceptable territory. In practice, I expect writing more than 3 bytes to a file, as well as disk I/O to mask any effects that this has. (To get rid of that 3%, we could have an #defined number of mounts in the percpu variable. So, instead of a CPU getting operate only on percpu data when it accesses only one mount, it could stay on percpu data when it only accesses N or fewer mounts.) [AV] merged fix for __clear_mnt_mount() stepping on freed vfsmount Acked-by: Al Viro <viro@ZenIV.linux.org.uk> Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Dave Hansen <haveblue@us.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-02-15 22:37:59 +00:00
}
EXPORT_SYMBOL_GPL(__mnt_is_readonly);
static inline void mnt_inc_writers(struct mount *mnt)
{
#ifdef CONFIG_SMP
this_cpu_inc(mnt->mnt_pcp->mnt_writers);
#else
mnt->mnt_writers++;
#endif
}
[PATCH] r/o bind mounts: track numbers of writers to mounts This is the real meat of the entire series. It actually implements the tracking of the number of writers to a mount. However, it causes scalability problems because there can be hundreds of cpus doing open()/close() on files on the same mnt at the same time. Even an atomic_t in the mnt has massive scalaing problems because the cacheline gets so terribly contended. This uses a statically-allocated percpu variable. All want/drop operations are local to a cpu as long that cpu operates on the same mount, and there are no writer count imbalances. Writer count imbalances happen when a write is taken on one cpu, and released on another, like when an open/close pair is performed on two Upon a remount,ro request, all of the data from the percpu variables is collected (expensive, but very rare) and we determine if there are any outstanding writers to the mount. I've written a little benchmark to sit in a loop for a couple of seconds in several cpus in parallel doing open/write/close loops. http://sr71.net/~dave/linux/openbench.c The code in here is a a worst-possible case for this patch. It does opens on a _pair_ of files in two different mounts in parallel. This should cause my code to lose its "operate on the same mount" optimization completely. This worst-case scenario causes a 3% degredation in the benchmark. I could probably get rid of even this 3%, but it would be more complex than what I have here, and I think this is getting into acceptable territory. In practice, I expect writing more than 3 bytes to a file, as well as disk I/O to mask any effects that this has. (To get rid of that 3%, we could have an #defined number of mounts in the percpu variable. So, instead of a CPU getting operate only on percpu data when it accesses only one mount, it could stay on percpu data when it only accesses N or fewer mounts.) [AV] merged fix for __clear_mnt_mount() stepping on freed vfsmount Acked-by: Al Viro <viro@ZenIV.linux.org.uk> Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Dave Hansen <haveblue@us.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-02-15 22:37:59 +00:00
static inline void mnt_dec_writers(struct mount *mnt)
[PATCH] r/o bind mounts: track numbers of writers to mounts This is the real meat of the entire series. It actually implements the tracking of the number of writers to a mount. However, it causes scalability problems because there can be hundreds of cpus doing open()/close() on files on the same mnt at the same time. Even an atomic_t in the mnt has massive scalaing problems because the cacheline gets so terribly contended. This uses a statically-allocated percpu variable. All want/drop operations are local to a cpu as long that cpu operates on the same mount, and there are no writer count imbalances. Writer count imbalances happen when a write is taken on one cpu, and released on another, like when an open/close pair is performed on two Upon a remount,ro request, all of the data from the percpu variables is collected (expensive, but very rare) and we determine if there are any outstanding writers to the mount. I've written a little benchmark to sit in a loop for a couple of seconds in several cpus in parallel doing open/write/close loops. http://sr71.net/~dave/linux/openbench.c The code in here is a a worst-possible case for this patch. It does opens on a _pair_ of files in two different mounts in parallel. This should cause my code to lose its "operate on the same mount" optimization completely. This worst-case scenario causes a 3% degredation in the benchmark. I could probably get rid of even this 3%, but it would be more complex than what I have here, and I think this is getting into acceptable territory. In practice, I expect writing more than 3 bytes to a file, as well as disk I/O to mask any effects that this has. (To get rid of that 3%, we could have an #defined number of mounts in the percpu variable. So, instead of a CPU getting operate only on percpu data when it accesses only one mount, it could stay on percpu data when it only accesses N or fewer mounts.) [AV] merged fix for __clear_mnt_mount() stepping on freed vfsmount Acked-by: Al Viro <viro@ZenIV.linux.org.uk> Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Dave Hansen <haveblue@us.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-02-15 22:37:59 +00:00
{
#ifdef CONFIG_SMP
this_cpu_dec(mnt->mnt_pcp->mnt_writers);
#else
mnt->mnt_writers--;
#endif
[PATCH] r/o bind mounts: track numbers of writers to mounts This is the real meat of the entire series. It actually implements the tracking of the number of writers to a mount. However, it causes scalability problems because there can be hundreds of cpus doing open()/close() on files on the same mnt at the same time. Even an atomic_t in the mnt has massive scalaing problems because the cacheline gets so terribly contended. This uses a statically-allocated percpu variable. All want/drop operations are local to a cpu as long that cpu operates on the same mount, and there are no writer count imbalances. Writer count imbalances happen when a write is taken on one cpu, and released on another, like when an open/close pair is performed on two Upon a remount,ro request, all of the data from the percpu variables is collected (expensive, but very rare) and we determine if there are any outstanding writers to the mount. I've written a little benchmark to sit in a loop for a couple of seconds in several cpus in parallel doing open/write/close loops. http://sr71.net/~dave/linux/openbench.c The code in here is a a worst-possible case for this patch. It does opens on a _pair_ of files in two different mounts in parallel. This should cause my code to lose its "operate on the same mount" optimization completely. This worst-case scenario causes a 3% degredation in the benchmark. I could probably get rid of even this 3%, but it would be more complex than what I have here, and I think this is getting into acceptable territory. In practice, I expect writing more than 3 bytes to a file, as well as disk I/O to mask any effects that this has. (To get rid of that 3%, we could have an #defined number of mounts in the percpu variable. So, instead of a CPU getting operate only on percpu data when it accesses only one mount, it could stay on percpu data when it only accesses N or fewer mounts.) [AV] merged fix for __clear_mnt_mount() stepping on freed vfsmount Acked-by: Al Viro <viro@ZenIV.linux.org.uk> Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Dave Hansen <haveblue@us.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-02-15 22:37:59 +00:00
}
static unsigned int mnt_get_writers(struct mount *mnt)
[PATCH] r/o bind mounts: track numbers of writers to mounts This is the real meat of the entire series. It actually implements the tracking of the number of writers to a mount. However, it causes scalability problems because there can be hundreds of cpus doing open()/close() on files on the same mnt at the same time. Even an atomic_t in the mnt has massive scalaing problems because the cacheline gets so terribly contended. This uses a statically-allocated percpu variable. All want/drop operations are local to a cpu as long that cpu operates on the same mount, and there are no writer count imbalances. Writer count imbalances happen when a write is taken on one cpu, and released on another, like when an open/close pair is performed on two Upon a remount,ro request, all of the data from the percpu variables is collected (expensive, but very rare) and we determine if there are any outstanding writers to the mount. I've written a little benchmark to sit in a loop for a couple of seconds in several cpus in parallel doing open/write/close loops. http://sr71.net/~dave/linux/openbench.c The code in here is a a worst-possible case for this patch. It does opens on a _pair_ of files in two different mounts in parallel. This should cause my code to lose its "operate on the same mount" optimization completely. This worst-case scenario causes a 3% degredation in the benchmark. I could probably get rid of even this 3%, but it would be more complex than what I have here, and I think this is getting into acceptable territory. In practice, I expect writing more than 3 bytes to a file, as well as disk I/O to mask any effects that this has. (To get rid of that 3%, we could have an #defined number of mounts in the percpu variable. So, instead of a CPU getting operate only on percpu data when it accesses only one mount, it could stay on percpu data when it only accesses N or fewer mounts.) [AV] merged fix for __clear_mnt_mount() stepping on freed vfsmount Acked-by: Al Viro <viro@ZenIV.linux.org.uk> Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Dave Hansen <haveblue@us.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-02-15 22:37:59 +00:00
{
#ifdef CONFIG_SMP
unsigned int count = 0;
[PATCH] r/o bind mounts: track numbers of writers to mounts This is the real meat of the entire series. It actually implements the tracking of the number of writers to a mount. However, it causes scalability problems because there can be hundreds of cpus doing open()/close() on files on the same mnt at the same time. Even an atomic_t in the mnt has massive scalaing problems because the cacheline gets so terribly contended. This uses a statically-allocated percpu variable. All want/drop operations are local to a cpu as long that cpu operates on the same mount, and there are no writer count imbalances. Writer count imbalances happen when a write is taken on one cpu, and released on another, like when an open/close pair is performed on two Upon a remount,ro request, all of the data from the percpu variables is collected (expensive, but very rare) and we determine if there are any outstanding writers to the mount. I've written a little benchmark to sit in a loop for a couple of seconds in several cpus in parallel doing open/write/close loops. http://sr71.net/~dave/linux/openbench.c The code in here is a a worst-possible case for this patch. It does opens on a _pair_ of files in two different mounts in parallel. This should cause my code to lose its "operate on the same mount" optimization completely. This worst-case scenario causes a 3% degredation in the benchmark. I could probably get rid of even this 3%, but it would be more complex than what I have here, and I think this is getting into acceptable territory. In practice, I expect writing more than 3 bytes to a file, as well as disk I/O to mask any effects that this has. (To get rid of that 3%, we could have an #defined number of mounts in the percpu variable. So, instead of a CPU getting operate only on percpu data when it accesses only one mount, it could stay on percpu data when it only accesses N or fewer mounts.) [AV] merged fix for __clear_mnt_mount() stepping on freed vfsmount Acked-by: Al Viro <viro@ZenIV.linux.org.uk> Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Dave Hansen <haveblue@us.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-02-15 22:37:59 +00:00
int cpu;
for_each_possible_cpu(cpu) {
count += per_cpu_ptr(mnt->mnt_pcp, cpu)->mnt_writers;
[PATCH] r/o bind mounts: track numbers of writers to mounts This is the real meat of the entire series. It actually implements the tracking of the number of writers to a mount. However, it causes scalability problems because there can be hundreds of cpus doing open()/close() on files on the same mnt at the same time. Even an atomic_t in the mnt has massive scalaing problems because the cacheline gets so terribly contended. This uses a statically-allocated percpu variable. All want/drop operations are local to a cpu as long that cpu operates on the same mount, and there are no writer count imbalances. Writer count imbalances happen when a write is taken on one cpu, and released on another, like when an open/close pair is performed on two Upon a remount,ro request, all of the data from the percpu variables is collected (expensive, but very rare) and we determine if there are any outstanding writers to the mount. I've written a little benchmark to sit in a loop for a couple of seconds in several cpus in parallel doing open/write/close loops. http://sr71.net/~dave/linux/openbench.c The code in here is a a worst-possible case for this patch. It does opens on a _pair_ of files in two different mounts in parallel. This should cause my code to lose its "operate on the same mount" optimization completely. This worst-case scenario causes a 3% degredation in the benchmark. I could probably get rid of even this 3%, but it would be more complex than what I have here, and I think this is getting into acceptable territory. In practice, I expect writing more than 3 bytes to a file, as well as disk I/O to mask any effects that this has. (To get rid of that 3%, we could have an #defined number of mounts in the percpu variable. So, instead of a CPU getting operate only on percpu data when it accesses only one mount, it could stay on percpu data when it only accesses N or fewer mounts.) [AV] merged fix for __clear_mnt_mount() stepping on freed vfsmount Acked-by: Al Viro <viro@ZenIV.linux.org.uk> Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Dave Hansen <haveblue@us.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-02-15 22:37:59 +00:00
}
return count;
#else
return mnt->mnt_writers;
#endif
[PATCH] r/o bind mounts: track numbers of writers to mounts This is the real meat of the entire series. It actually implements the tracking of the number of writers to a mount. However, it causes scalability problems because there can be hundreds of cpus doing open()/close() on files on the same mnt at the same time. Even an atomic_t in the mnt has massive scalaing problems because the cacheline gets so terribly contended. This uses a statically-allocated percpu variable. All want/drop operations are local to a cpu as long that cpu operates on the same mount, and there are no writer count imbalances. Writer count imbalances happen when a write is taken on one cpu, and released on another, like when an open/close pair is performed on two Upon a remount,ro request, all of the data from the percpu variables is collected (expensive, but very rare) and we determine if there are any outstanding writers to the mount. I've written a little benchmark to sit in a loop for a couple of seconds in several cpus in parallel doing open/write/close loops. http://sr71.net/~dave/linux/openbench.c The code in here is a a worst-possible case for this patch. It does opens on a _pair_ of files in two different mounts in parallel. This should cause my code to lose its "operate on the same mount" optimization completely. This worst-case scenario causes a 3% degredation in the benchmark. I could probably get rid of even this 3%, but it would be more complex than what I have here, and I think this is getting into acceptable territory. In practice, I expect writing more than 3 bytes to a file, as well as disk I/O to mask any effects that this has. (To get rid of that 3%, we could have an #defined number of mounts in the percpu variable. So, instead of a CPU getting operate only on percpu data when it accesses only one mount, it could stay on percpu data when it only accesses N or fewer mounts.) [AV] merged fix for __clear_mnt_mount() stepping on freed vfsmount Acked-by: Al Viro <viro@ZenIV.linux.org.uk> Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Dave Hansen <haveblue@us.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-02-15 22:37:59 +00:00
}
static int mnt_is_readonly(struct vfsmount *mnt)
{
if (READ_ONCE(mnt->mnt_sb->s_readonly_remount))
return 1;
/*
* The barrier pairs with the barrier in sb_start_ro_state_change()
* making sure if we don't see s_readonly_remount set yet, we also will
* not see any superblock / mount flag changes done by remount.
* It also pairs with the barrier in sb_end_ro_state_change()
* assuring that if we see s_readonly_remount already cleared, we will
* see the values of superblock / mount flags updated by remount.
*/
smp_rmb();
return __mnt_is_readonly(mnt);
}
/*
* Most r/o & frozen checks on a fs are for operations that take discrete
* amounts of time, like a write() or unlink(). We must keep track of when
* those operations start (for permission checks) and when they end, so that we
* can determine when writes are able to occur to a filesystem.
*/
/**
* mnt_get_write_access - get write access to a mount without freeze protection
* @m: the mount on which to take a write
*
* This tells the low-level filesystem that a write is about to be performed to
* it, and makes sure that writes are allowed (mnt it read-write) before
* returning success. This operation does not protect against filesystem being
* frozen. When the write operation is finished, mnt_put_write_access() must be
* called. This is effectively a refcount.
*/
int mnt_get_write_access(struct vfsmount *m)
{
struct mount *mnt = real_mount(m);
[PATCH] r/o bind mounts: track numbers of writers to mounts This is the real meat of the entire series. It actually implements the tracking of the number of writers to a mount. However, it causes scalability problems because there can be hundreds of cpus doing open()/close() on files on the same mnt at the same time. Even an atomic_t in the mnt has massive scalaing problems because the cacheline gets so terribly contended. This uses a statically-allocated percpu variable. All want/drop operations are local to a cpu as long that cpu operates on the same mount, and there are no writer count imbalances. Writer count imbalances happen when a write is taken on one cpu, and released on another, like when an open/close pair is performed on two Upon a remount,ro request, all of the data from the percpu variables is collected (expensive, but very rare) and we determine if there are any outstanding writers to the mount. I've written a little benchmark to sit in a loop for a couple of seconds in several cpus in parallel doing open/write/close loops. http://sr71.net/~dave/linux/openbench.c The code in here is a a worst-possible case for this patch. It does opens on a _pair_ of files in two different mounts in parallel. This should cause my code to lose its "operate on the same mount" optimization completely. This worst-case scenario causes a 3% degredation in the benchmark. I could probably get rid of even this 3%, but it would be more complex than what I have here, and I think this is getting into acceptable territory. In practice, I expect writing more than 3 bytes to a file, as well as disk I/O to mask any effects that this has. (To get rid of that 3%, we could have an #defined number of mounts in the percpu variable. So, instead of a CPU getting operate only on percpu data when it accesses only one mount, it could stay on percpu data when it only accesses N or fewer mounts.) [AV] merged fix for __clear_mnt_mount() stepping on freed vfsmount Acked-by: Al Viro <viro@ZenIV.linux.org.uk> Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Dave Hansen <haveblue@us.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-02-15 22:37:59 +00:00
int ret = 0;
preempt_disable();
mnt_inc_writers(mnt);
/*
* The store to mnt_inc_writers must be visible before we pass
* MNT_WRITE_HOLD loop below, so that the slowpath can see our
* incremented count after it has set MNT_WRITE_HOLD.
*/
smp_mb();
might_lock(&mount_lock.lock);
while (READ_ONCE(mnt->mnt.mnt_flags) & MNT_WRITE_HOLD) {
if (!IS_ENABLED(CONFIG_PREEMPT_RT)) {
cpu_relax();
} else {
/*
* This prevents priority inversion, if the task
* setting MNT_WRITE_HOLD got preempted on a remote
* CPU, and it prevents life lock if the task setting
* MNT_WRITE_HOLD has a lower priority and is bound to
* the same CPU as the task that is spinning here.
*/
preempt_enable();
lock_mount_hash();
unlock_mount_hash();
preempt_disable();
}
}
/*
* The barrier pairs with the barrier sb_start_ro_state_change() making
* sure that if we see MNT_WRITE_HOLD cleared, we will also see
* s_readonly_remount set (or even SB_RDONLY / MNT_READONLY flags) in
* mnt_is_readonly() and bail in case we are racing with remount
* read-only.
*/
smp_rmb();
if (mnt_is_readonly(m)) {
mnt_dec_writers(mnt);
[PATCH] r/o bind mounts: track numbers of writers to mounts This is the real meat of the entire series. It actually implements the tracking of the number of writers to a mount. However, it causes scalability problems because there can be hundreds of cpus doing open()/close() on files on the same mnt at the same time. Even an atomic_t in the mnt has massive scalaing problems because the cacheline gets so terribly contended. This uses a statically-allocated percpu variable. All want/drop operations are local to a cpu as long that cpu operates on the same mount, and there are no writer count imbalances. Writer count imbalances happen when a write is taken on one cpu, and released on another, like when an open/close pair is performed on two Upon a remount,ro request, all of the data from the percpu variables is collected (expensive, but very rare) and we determine if there are any outstanding writers to the mount. I've written a little benchmark to sit in a loop for a couple of seconds in several cpus in parallel doing open/write/close loops. http://sr71.net/~dave/linux/openbench.c The code in here is a a worst-possible case for this patch. It does opens on a _pair_ of files in two different mounts in parallel. This should cause my code to lose its "operate on the same mount" optimization completely. This worst-case scenario causes a 3% degredation in the benchmark. I could probably get rid of even this 3%, but it would be more complex than what I have here, and I think this is getting into acceptable territory. In practice, I expect writing more than 3 bytes to a file, as well as disk I/O to mask any effects that this has. (To get rid of that 3%, we could have an #defined number of mounts in the percpu variable. So, instead of a CPU getting operate only on percpu data when it accesses only one mount, it could stay on percpu data when it only accesses N or fewer mounts.) [AV] merged fix for __clear_mnt_mount() stepping on freed vfsmount Acked-by: Al Viro <viro@ZenIV.linux.org.uk> Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Dave Hansen <haveblue@us.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-02-15 22:37:59 +00:00
ret = -EROFS;
}
preempt_enable();
return ret;
}
EXPORT_SYMBOL_GPL(mnt_get_write_access);
/**
* mnt_want_write - get write access to a mount
* @m: the mount on which to take a write
*
* This tells the low-level filesystem that a write is about to be performed to
* it, and makes sure that writes are allowed (mount is read-write, filesystem
* is not frozen) before returning success. When the write operation is
* finished, mnt_drop_write() must be called. This is effectively a refcount.
*/
int mnt_want_write(struct vfsmount *m)
{
int ret;
sb_start_write(m->mnt_sb);
ret = mnt_get_write_access(m);
if (ret)
sb_end_write(m->mnt_sb);
[PATCH] r/o bind mounts: track numbers of writers to mounts This is the real meat of the entire series. It actually implements the tracking of the number of writers to a mount. However, it causes scalability problems because there can be hundreds of cpus doing open()/close() on files on the same mnt at the same time. Even an atomic_t in the mnt has massive scalaing problems because the cacheline gets so terribly contended. This uses a statically-allocated percpu variable. All want/drop operations are local to a cpu as long that cpu operates on the same mount, and there are no writer count imbalances. Writer count imbalances happen when a write is taken on one cpu, and released on another, like when an open/close pair is performed on two Upon a remount,ro request, all of the data from the percpu variables is collected (expensive, but very rare) and we determine if there are any outstanding writers to the mount. I've written a little benchmark to sit in a loop for a couple of seconds in several cpus in parallel doing open/write/close loops. http://sr71.net/~dave/linux/openbench.c The code in here is a a worst-possible case for this patch. It does opens on a _pair_ of files in two different mounts in parallel. This should cause my code to lose its "operate on the same mount" optimization completely. This worst-case scenario causes a 3% degredation in the benchmark. I could probably get rid of even this 3%, but it would be more complex than what I have here, and I think this is getting into acceptable territory. In practice, I expect writing more than 3 bytes to a file, as well as disk I/O to mask any effects that this has. (To get rid of that 3%, we could have an #defined number of mounts in the percpu variable. So, instead of a CPU getting operate only on percpu data when it accesses only one mount, it could stay on percpu data when it only accesses N or fewer mounts.) [AV] merged fix for __clear_mnt_mount() stepping on freed vfsmount Acked-by: Al Viro <viro@ZenIV.linux.org.uk> Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Dave Hansen <haveblue@us.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-02-15 22:37:59 +00:00
return ret;
}
EXPORT_SYMBOL_GPL(mnt_want_write);
/**
* mnt_get_write_access_file - get write access to a file's mount
* @file: the file who's mount on which to take a write
*
* This is like mnt_get_write_access, but if @file is already open for write it
* skips incrementing mnt_writers (since the open file already has a reference)
* and instead only does the check for emergency r/o remounts. This must be
* paired with mnt_put_write_access_file.
*/
int mnt_get_write_access_file(struct file *file)
{
if (file->f_mode & FMODE_WRITER) {
/*
* Superblock may have become readonly while there are still
* writable fd's, e.g. due to a fs error with errors=remount-ro
*/
if (__mnt_is_readonly(file->f_path.mnt))
return -EROFS;
return 0;
}
return mnt_get_write_access(file->f_path.mnt);
}
/**
* mnt_want_write_file - get write access to a file's mount
* @file: the file who's mount on which to take a write
*
* This is like mnt_want_write, but if the file is already open for writing it
* skips incrementing mnt_writers (since the open file already has a reference)
* and instead only does the freeze protection and the check for emergency r/o
* remounts. This must be paired with mnt_drop_write_file.
*/
int mnt_want_write_file(struct file *file)
{
int ret;
sb_start_write(file_inode(file)->i_sb);
ret = mnt_get_write_access_file(file);
if (ret)
sb_end_write(file_inode(file)->i_sb);
return ret;
}
EXPORT_SYMBOL_GPL(mnt_want_write_file);
/**
* mnt_put_write_access - give up write access to a mount
* @mnt: the mount on which to give up write access
*
* Tells the low-level filesystem that we are done
* performing writes to it. Must be matched with
* mnt_get_write_access() call above.
*/
void mnt_put_write_access(struct vfsmount *mnt)
{
preempt_disable();
mnt_dec_writers(real_mount(mnt));
preempt_enable();
}
EXPORT_SYMBOL_GPL(mnt_put_write_access);
/**
* mnt_drop_write - give up write access to a mount
* @mnt: the mount on which to give up write access
*
* Tells the low-level filesystem that we are done performing writes to it and
* also allows filesystem to be frozen again. Must be matched with
* mnt_want_write() call above.
*/
void mnt_drop_write(struct vfsmount *mnt)
{
mnt_put_write_access(mnt);
sb_end_write(mnt->mnt_sb);
}
EXPORT_SYMBOL_GPL(mnt_drop_write);
void mnt_put_write_access_file(struct file *file)
{
if (!(file->f_mode & FMODE_WRITER))
mnt_put_write_access(file->f_path.mnt);
}
void mnt_drop_write_file(struct file *file)
{
mnt_put_write_access_file(file);
sb_end_write(file_inode(file)->i_sb);
}
EXPORT_SYMBOL(mnt_drop_write_file);
/**
* mnt_hold_writers - prevent write access to the given mount
* @mnt: mnt to prevent write access to
*
* Prevents write access to @mnt if there are no active writers for @mnt.
* This function needs to be called and return successfully before changing
* properties of @mnt that need to remain stable for callers with write access
* to @mnt.
*
* After this functions has been called successfully callers must pair it with
* a call to mnt_unhold_writers() in order to stop preventing write access to
* @mnt.
*
* Context: This function expects lock_mount_hash() to be held serializing
* setting MNT_WRITE_HOLD.
* Return: On success 0 is returned.
* On error, -EBUSY is returned.
*/
static inline int mnt_hold_writers(struct mount *mnt)
{
mnt->mnt.mnt_flags |= MNT_WRITE_HOLD;
[PATCH] r/o bind mounts: track numbers of writers to mounts This is the real meat of the entire series. It actually implements the tracking of the number of writers to a mount. However, it causes scalability problems because there can be hundreds of cpus doing open()/close() on files on the same mnt at the same time. Even an atomic_t in the mnt has massive scalaing problems because the cacheline gets so terribly contended. This uses a statically-allocated percpu variable. All want/drop operations are local to a cpu as long that cpu operates on the same mount, and there are no writer count imbalances. Writer count imbalances happen when a write is taken on one cpu, and released on another, like when an open/close pair is performed on two Upon a remount,ro request, all of the data from the percpu variables is collected (expensive, but very rare) and we determine if there are any outstanding writers to the mount. I've written a little benchmark to sit in a loop for a couple of seconds in several cpus in parallel doing open/write/close loops. http://sr71.net/~dave/linux/openbench.c The code in here is a a worst-possible case for this patch. It does opens on a _pair_ of files in two different mounts in parallel. This should cause my code to lose its "operate on the same mount" optimization completely. This worst-case scenario causes a 3% degredation in the benchmark. I could probably get rid of even this 3%, but it would be more complex than what I have here, and I think this is getting into acceptable territory. In practice, I expect writing more than 3 bytes to a file, as well as disk I/O to mask any effects that this has. (To get rid of that 3%, we could have an #defined number of mounts in the percpu variable. So, instead of a CPU getting operate only on percpu data when it accesses only one mount, it could stay on percpu data when it only accesses N or fewer mounts.) [AV] merged fix for __clear_mnt_mount() stepping on freed vfsmount Acked-by: Al Viro <viro@ZenIV.linux.org.uk> Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Dave Hansen <haveblue@us.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-02-15 22:37:59 +00:00
/*
* After storing MNT_WRITE_HOLD, we'll read the counters. This store
* should be visible before we do.
[PATCH] r/o bind mounts: track numbers of writers to mounts This is the real meat of the entire series. It actually implements the tracking of the number of writers to a mount. However, it causes scalability problems because there can be hundreds of cpus doing open()/close() on files on the same mnt at the same time. Even an atomic_t in the mnt has massive scalaing problems because the cacheline gets so terribly contended. This uses a statically-allocated percpu variable. All want/drop operations are local to a cpu as long that cpu operates on the same mount, and there are no writer count imbalances. Writer count imbalances happen when a write is taken on one cpu, and released on another, like when an open/close pair is performed on two Upon a remount,ro request, all of the data from the percpu variables is collected (expensive, but very rare) and we determine if there are any outstanding writers to the mount. I've written a little benchmark to sit in a loop for a couple of seconds in several cpus in parallel doing open/write/close loops. http://sr71.net/~dave/linux/openbench.c The code in here is a a worst-possible case for this patch. It does opens on a _pair_ of files in two different mounts in parallel. This should cause my code to lose its "operate on the same mount" optimization completely. This worst-case scenario causes a 3% degredation in the benchmark. I could probably get rid of even this 3%, but it would be more complex than what I have here, and I think this is getting into acceptable territory. In practice, I expect writing more than 3 bytes to a file, as well as disk I/O to mask any effects that this has. (To get rid of that 3%, we could have an #defined number of mounts in the percpu variable. So, instead of a CPU getting operate only on percpu data when it accesses only one mount, it could stay on percpu data when it only accesses N or fewer mounts.) [AV] merged fix for __clear_mnt_mount() stepping on freed vfsmount Acked-by: Al Viro <viro@ZenIV.linux.org.uk> Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Dave Hansen <haveblue@us.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-02-15 22:37:59 +00:00
*/
smp_mb();
[PATCH] r/o bind mounts: track numbers of writers to mounts This is the real meat of the entire series. It actually implements the tracking of the number of writers to a mount. However, it causes scalability problems because there can be hundreds of cpus doing open()/close() on files on the same mnt at the same time. Even an atomic_t in the mnt has massive scalaing problems because the cacheline gets so terribly contended. This uses a statically-allocated percpu variable. All want/drop operations are local to a cpu as long that cpu operates on the same mount, and there are no writer count imbalances. Writer count imbalances happen when a write is taken on one cpu, and released on another, like when an open/close pair is performed on two Upon a remount,ro request, all of the data from the percpu variables is collected (expensive, but very rare) and we determine if there are any outstanding writers to the mount. I've written a little benchmark to sit in a loop for a couple of seconds in several cpus in parallel doing open/write/close loops. http://sr71.net/~dave/linux/openbench.c The code in here is a a worst-possible case for this patch. It does opens on a _pair_ of files in two different mounts in parallel. This should cause my code to lose its "operate on the same mount" optimization completely. This worst-case scenario causes a 3% degredation in the benchmark. I could probably get rid of even this 3%, but it would be more complex than what I have here, and I think this is getting into acceptable territory. In practice, I expect writing more than 3 bytes to a file, as well as disk I/O to mask any effects that this has. (To get rid of that 3%, we could have an #defined number of mounts in the percpu variable. So, instead of a CPU getting operate only on percpu data when it accesses only one mount, it could stay on percpu data when it only accesses N or fewer mounts.) [AV] merged fix for __clear_mnt_mount() stepping on freed vfsmount Acked-by: Al Viro <viro@ZenIV.linux.org.uk> Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Dave Hansen <haveblue@us.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-02-15 22:37:59 +00:00
/*
* With writers on hold, if this value is zero, then there are
* definitely no active writers (although held writers may subsequently
* increment the count, they'll have to wait, and decrement it after
* seeing MNT_READONLY).
*
* It is OK to have counter incremented on one CPU and decremented on
* another: the sum will add up correctly. The danger would be when we
* sum up each counter, if we read a counter before it is incremented,
* but then read another CPU's count which it has been subsequently
* decremented from -- we would see more decrements than we should.
* MNT_WRITE_HOLD protects against this scenario, because
* mnt_want_write first increments count, then smp_mb, then spins on
* MNT_WRITE_HOLD, so it can't be decremented by another CPU while
* we're counting up here.
[PATCH] r/o bind mounts: track numbers of writers to mounts This is the real meat of the entire series. It actually implements the tracking of the number of writers to a mount. However, it causes scalability problems because there can be hundreds of cpus doing open()/close() on files on the same mnt at the same time. Even an atomic_t in the mnt has massive scalaing problems because the cacheline gets so terribly contended. This uses a statically-allocated percpu variable. All want/drop operations are local to a cpu as long that cpu operates on the same mount, and there are no writer count imbalances. Writer count imbalances happen when a write is taken on one cpu, and released on another, like when an open/close pair is performed on two Upon a remount,ro request, all of the data from the percpu variables is collected (expensive, but very rare) and we determine if there are any outstanding writers to the mount. I've written a little benchmark to sit in a loop for a couple of seconds in several cpus in parallel doing open/write/close loops. http://sr71.net/~dave/linux/openbench.c The code in here is a a worst-possible case for this patch. It does opens on a _pair_ of files in two different mounts in parallel. This should cause my code to lose its "operate on the same mount" optimization completely. This worst-case scenario causes a 3% degredation in the benchmark. I could probably get rid of even this 3%, but it would be more complex than what I have here, and I think this is getting into acceptable territory. In practice, I expect writing more than 3 bytes to a file, as well as disk I/O to mask any effects that this has. (To get rid of that 3%, we could have an #defined number of mounts in the percpu variable. So, instead of a CPU getting operate only on percpu data when it accesses only one mount, it could stay on percpu data when it only accesses N or fewer mounts.) [AV] merged fix for __clear_mnt_mount() stepping on freed vfsmount Acked-by: Al Viro <viro@ZenIV.linux.org.uk> Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Dave Hansen <haveblue@us.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-02-15 22:37:59 +00:00
*/
if (mnt_get_writers(mnt) > 0)
return -EBUSY;
return 0;
}
/**
* mnt_unhold_writers - stop preventing write access to the given mount
* @mnt: mnt to stop preventing write access to
*
* Stop preventing write access to @mnt allowing callers to gain write access
* to @mnt again.
*
* This function can only be called after a successful call to
* mnt_hold_writers().
*
* Context: This function expects lock_mount_hash() to be held.
*/
static inline void mnt_unhold_writers(struct mount *mnt)
{
/*
* MNT_READONLY must become visible before ~MNT_WRITE_HOLD, so writers
* that become unheld will see MNT_READONLY.
*/
smp_wmb();
mnt->mnt.mnt_flags &= ~MNT_WRITE_HOLD;
}
static int mnt_make_readonly(struct mount *mnt)
{
int ret;
ret = mnt_hold_writers(mnt);
if (!ret)
mnt->mnt.mnt_flags |= MNT_READONLY;
mnt_unhold_writers(mnt);
[PATCH] r/o bind mounts: track numbers of writers to mounts This is the real meat of the entire series. It actually implements the tracking of the number of writers to a mount. However, it causes scalability problems because there can be hundreds of cpus doing open()/close() on files on the same mnt at the same time. Even an atomic_t in the mnt has massive scalaing problems because the cacheline gets so terribly contended. This uses a statically-allocated percpu variable. All want/drop operations are local to a cpu as long that cpu operates on the same mount, and there are no writer count imbalances. Writer count imbalances happen when a write is taken on one cpu, and released on another, like when an open/close pair is performed on two Upon a remount,ro request, all of the data from the percpu variables is collected (expensive, but very rare) and we determine if there are any outstanding writers to the mount. I've written a little benchmark to sit in a loop for a couple of seconds in several cpus in parallel doing open/write/close loops. http://sr71.net/~dave/linux/openbench.c The code in here is a a worst-possible case for this patch. It does opens on a _pair_ of files in two different mounts in parallel. This should cause my code to lose its "operate on the same mount" optimization completely. This worst-case scenario causes a 3% degredation in the benchmark. I could probably get rid of even this 3%, but it would be more complex than what I have here, and I think this is getting into acceptable territory. In practice, I expect writing more than 3 bytes to a file, as well as disk I/O to mask any effects that this has. (To get rid of that 3%, we could have an #defined number of mounts in the percpu variable. So, instead of a CPU getting operate only on percpu data when it accesses only one mount, it could stay on percpu data when it only accesses N or fewer mounts.) [AV] merged fix for __clear_mnt_mount() stepping on freed vfsmount Acked-by: Al Viro <viro@ZenIV.linux.org.uk> Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Dave Hansen <haveblue@us.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-02-15 22:37:59 +00:00
return ret;
}
int sb_prepare_remount_readonly(struct super_block *sb)
{
struct mount *mnt;
int err = 0;
/* Racy optimization. Recheck the counter under MNT_WRITE_HOLD */
if (atomic_long_read(&sb->s_remove_count))
return -EBUSY;
lock_mount_hash();
list_for_each_entry(mnt, &sb->s_mounts, mnt_instance) {
if (!(mnt->mnt.mnt_flags & MNT_READONLY)) {
err = mnt_hold_writers(mnt);
if (err)
break;
}
}
if (!err && atomic_long_read(&sb->s_remove_count))
err = -EBUSY;
if (!err)
sb_start_ro_state_change(sb);
list_for_each_entry(mnt, &sb->s_mounts, mnt_instance) {
if (mnt->mnt.mnt_flags & MNT_WRITE_HOLD)
mnt->mnt.mnt_flags &= ~MNT_WRITE_HOLD;
}
unlock_mount_hash();
return err;
}
static void free_vfsmnt(struct mount *mnt)
{
fs: introduce dedicated idmap type for mounts Last cycle we've already made the interaction with idmapped mounts more robust and type safe by introducing the vfs{g,u}id_t type. This cycle we concluded the conversion and removed the legacy helpers. Currently we still pass around the plain namespace that was attached to a mount. This is in general pretty convenient but it makes it easy to conflate filesystem and mount namespaces and what different roles they have to play. Especially for filesystem developers without much experience in this area this is an easy source for bugs. Instead of passing the plain namespace we introduce a dedicated type struct mnt_idmap and replace the pointer with a pointer to a struct mnt_idmap. There are no semantic or size changes for the mount struct caused by this. We then start converting all places aware of idmapped mounts to rely on struct mnt_idmap. Once the conversion is done all helpers down to the really low-level make_vfs{g,u}id() and from_vfs{g,u}id() will take a struct mnt_idmap argument instead of two namespace arguments. This way it becomes impossible to conflate the two, removing and thus eliminating the possibility of any bugs. Fwiw, I fixed some issues in that area a while ago in ntfs3 and ksmbd in the past. Afterwards, only low-level code can ultimately use the associated namespace for any permission checks. Even most of the vfs can be ultimately completely oblivious about this and filesystems will never interact with it directly in any form in the future. A struct mnt_idmap currently encompasses a simple refcount and a pointer to the relevant namespace the mount is idmapped to. If a mount isn't idmapped then it will point to a static nop_mnt_idmap. If it is an idmapped mount it will point to a new struct mnt_idmap. As usual there are no allocations or anything happening for non-idmapped mounts. Everthing is carefully written to be a nop for non-idmapped mounts as has always been the case. If an idmapped mount or mount tree is created a new struct mnt_idmap is allocated and a reference taken on the relevant namespace. For each mount in a mount tree that gets idmapped or a mount that inherits the idmap when it is cloned the reference count on the associated struct mnt_idmap is bumped. Just a reminder that we only allow a mount to change it's idmapping a single time and only if it hasn't already been attached to the filesystems and has no active writers. The actual changes are fairly straightforward. This will have huge benefits for maintenance and security in the long run even if it causes some churn. I'm aware that there's some cost for all of you. And I'll commit to doing this work and make this as painless as I can. Note that this also makes it possible to extend struct mount_idmap in the future. For example, it would be possible to place the namespace pointer in an anonymous union together with an idmapping struct. This would allow us to expose an api to userspace that would let it specify idmappings directly instead of having to go through the detour of setting up namespaces at all. This just adds the infrastructure and doesn't do any conversions. Reviewed-by: Seth Forshee (DigitalOcean) <sforshee@kernel.org> Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
2022-10-26 10:51:27 +00:00
mnt_idmap_put(mnt_idmap(&mnt->mnt));
kfree_const(mnt->mnt_devname);
#ifdef CONFIG_SMP
free_percpu(mnt->mnt_pcp);
#endif
kmem_cache_free(mnt_cache, mnt);
}
static void delayed_free_vfsmnt(struct rcu_head *head)
{
free_vfsmnt(container_of(head, struct mount, mnt_rcu));
}
RCU'd vfsmounts * RCU-delayed freeing of vfsmounts * vfsmount_lock replaced with a seqlock (mount_lock) * sequence number from mount_lock is stored in nameidata->m_seq and used when we exit RCU mode * new vfsmount flag - MNT_SYNC_UMOUNT. Set by umount_tree() when its caller knows that vfsmount will have no surviving references. * synchronize_rcu() done between unlocking namespace_sem in namespace_unlock() and doing pending mntput(). * new helper: legitimize_mnt(mnt, seq). Checks the mount_lock sequence number against seq, then grabs reference to mnt. Then it rechecks mount_lock again to close the race and either returns success or drops the reference it has acquired. The subtle point is that in case of MNT_SYNC_UMOUNT we can simply decrement the refcount and sod off - aforementioned synchronize_rcu() makes sure that final mntput() won't come until we leave RCU mode. We need that, since we don't want to end up with some lazy pathwalk racing with umount() and stealing the final mntput() from it - caller of umount() may expect it to return only once the fs is shut down and we don't want to break that. In other cases (i.e. with MNT_SYNC_UMOUNT absent) we have to do full-blown mntput() in case of mount_lock sequence number mismatch happening just as we'd grabbed the reference, but in those cases we won't be stealing the final mntput() from anything that would care. * mntput_no_expire() doesn't lock anything on the fast path now. Incidentally, SMP and UP cases are handled the same way - no ifdefs there. * normal pathname resolution does *not* do any writes to mount_lock. It does, of course, bump the refcounts of vfsmount and dentry in the very end, but that's it. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-09-30 02:06:07 +00:00
/* call under rcu_read_lock */
int __legitimize_mnt(struct vfsmount *bastard, unsigned seq)
RCU'd vfsmounts * RCU-delayed freeing of vfsmounts * vfsmount_lock replaced with a seqlock (mount_lock) * sequence number from mount_lock is stored in nameidata->m_seq and used when we exit RCU mode * new vfsmount flag - MNT_SYNC_UMOUNT. Set by umount_tree() when its caller knows that vfsmount will have no surviving references. * synchronize_rcu() done between unlocking namespace_sem in namespace_unlock() and doing pending mntput(). * new helper: legitimize_mnt(mnt, seq). Checks the mount_lock sequence number against seq, then grabs reference to mnt. Then it rechecks mount_lock again to close the race and either returns success or drops the reference it has acquired. The subtle point is that in case of MNT_SYNC_UMOUNT we can simply decrement the refcount and sod off - aforementioned synchronize_rcu() makes sure that final mntput() won't come until we leave RCU mode. We need that, since we don't want to end up with some lazy pathwalk racing with umount() and stealing the final mntput() from it - caller of umount() may expect it to return only once the fs is shut down and we don't want to break that. In other cases (i.e. with MNT_SYNC_UMOUNT absent) we have to do full-blown mntput() in case of mount_lock sequence number mismatch happening just as we'd grabbed the reference, but in those cases we won't be stealing the final mntput() from anything that would care. * mntput_no_expire() doesn't lock anything on the fast path now. Incidentally, SMP and UP cases are handled the same way - no ifdefs there. * normal pathname resolution does *not* do any writes to mount_lock. It does, of course, bump the refcounts of vfsmount and dentry in the very end, but that's it. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-09-30 02:06:07 +00:00
{
struct mount *mnt;
if (read_seqretry(&mount_lock, seq))
return 1;
RCU'd vfsmounts * RCU-delayed freeing of vfsmounts * vfsmount_lock replaced with a seqlock (mount_lock) * sequence number from mount_lock is stored in nameidata->m_seq and used when we exit RCU mode * new vfsmount flag - MNT_SYNC_UMOUNT. Set by umount_tree() when its caller knows that vfsmount will have no surviving references. * synchronize_rcu() done between unlocking namespace_sem in namespace_unlock() and doing pending mntput(). * new helper: legitimize_mnt(mnt, seq). Checks the mount_lock sequence number against seq, then grabs reference to mnt. Then it rechecks mount_lock again to close the race and either returns success or drops the reference it has acquired. The subtle point is that in case of MNT_SYNC_UMOUNT we can simply decrement the refcount and sod off - aforementioned synchronize_rcu() makes sure that final mntput() won't come until we leave RCU mode. We need that, since we don't want to end up with some lazy pathwalk racing with umount() and stealing the final mntput() from it - caller of umount() may expect it to return only once the fs is shut down and we don't want to break that. In other cases (i.e. with MNT_SYNC_UMOUNT absent) we have to do full-blown mntput() in case of mount_lock sequence number mismatch happening just as we'd grabbed the reference, but in those cases we won't be stealing the final mntput() from anything that would care. * mntput_no_expire() doesn't lock anything on the fast path now. Incidentally, SMP and UP cases are handled the same way - no ifdefs there. * normal pathname resolution does *not* do any writes to mount_lock. It does, of course, bump the refcounts of vfsmount and dentry in the very end, but that's it. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-09-30 02:06:07 +00:00
if (bastard == NULL)
return 0;
RCU'd vfsmounts * RCU-delayed freeing of vfsmounts * vfsmount_lock replaced with a seqlock (mount_lock) * sequence number from mount_lock is stored in nameidata->m_seq and used when we exit RCU mode * new vfsmount flag - MNT_SYNC_UMOUNT. Set by umount_tree() when its caller knows that vfsmount will have no surviving references. * synchronize_rcu() done between unlocking namespace_sem in namespace_unlock() and doing pending mntput(). * new helper: legitimize_mnt(mnt, seq). Checks the mount_lock sequence number against seq, then grabs reference to mnt. Then it rechecks mount_lock again to close the race and either returns success or drops the reference it has acquired. The subtle point is that in case of MNT_SYNC_UMOUNT we can simply decrement the refcount and sod off - aforementioned synchronize_rcu() makes sure that final mntput() won't come until we leave RCU mode. We need that, since we don't want to end up with some lazy pathwalk racing with umount() and stealing the final mntput() from it - caller of umount() may expect it to return only once the fs is shut down and we don't want to break that. In other cases (i.e. with MNT_SYNC_UMOUNT absent) we have to do full-blown mntput() in case of mount_lock sequence number mismatch happening just as we'd grabbed the reference, but in those cases we won't be stealing the final mntput() from anything that would care. * mntput_no_expire() doesn't lock anything on the fast path now. Incidentally, SMP and UP cases are handled the same way - no ifdefs there. * normal pathname resolution does *not* do any writes to mount_lock. It does, of course, bump the refcounts of vfsmount and dentry in the very end, but that's it. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-09-30 02:06:07 +00:00
mnt = real_mount(bastard);
mnt_add_count(mnt, 1);
fix __legitimize_mnt()/mntput() race __legitimize_mnt() has two problems - one is that in case of success the check of mount_lock is not ordered wrt preceding increment of refcount, making it possible to have successful __legitimize_mnt() on one CPU just before the otherwise final mntpu() on another, with __legitimize_mnt() not seeing mntput() taking the lock and mntput() not seeing the increment done by __legitimize_mnt(). Solved by a pair of barriers. Another is that failure of __legitimize_mnt() on the second read_seqretry() leaves us with reference that'll need to be dropped by caller; however, if that races with final mntput() we can end up with caller dropping rcu_read_lock() and doing mntput() to release that reference - with the first mntput() having freed the damn thing just as rcu_read_lock() had been dropped. Solution: in "do mntput() yourself" failure case grab mount_lock, check if MNT_DOOMED has been set by racing final mntput() that has missed our increment and if it has - undo the increment and treat that as "failure, caller doesn't need to drop anything" case. It's not easy to hit - the final mntput() has to come right after the first read_seqretry() in __legitimize_mnt() *and* manage to miss the increment done by __legitimize_mnt() before the second read_seqretry() in there. The things that are almost impossible to hit on bare hardware are not impossible on SMP KVM, though... Reported-by: Oleg Nesterov <oleg@redhat.com> Fixes: 48a066e72d97 ("RCU'd vsfmounts") Cc: stable@vger.kernel.org Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2018-08-09 21:51:32 +00:00
smp_mb(); // see mntput_no_expire()
RCU'd vfsmounts * RCU-delayed freeing of vfsmounts * vfsmount_lock replaced with a seqlock (mount_lock) * sequence number from mount_lock is stored in nameidata->m_seq and used when we exit RCU mode * new vfsmount flag - MNT_SYNC_UMOUNT. Set by umount_tree() when its caller knows that vfsmount will have no surviving references. * synchronize_rcu() done between unlocking namespace_sem in namespace_unlock() and doing pending mntput(). * new helper: legitimize_mnt(mnt, seq). Checks the mount_lock sequence number against seq, then grabs reference to mnt. Then it rechecks mount_lock again to close the race and either returns success or drops the reference it has acquired. The subtle point is that in case of MNT_SYNC_UMOUNT we can simply decrement the refcount and sod off - aforementioned synchronize_rcu() makes sure that final mntput() won't come until we leave RCU mode. We need that, since we don't want to end up with some lazy pathwalk racing with umount() and stealing the final mntput() from it - caller of umount() may expect it to return only once the fs is shut down and we don't want to break that. In other cases (i.e. with MNT_SYNC_UMOUNT absent) we have to do full-blown mntput() in case of mount_lock sequence number mismatch happening just as we'd grabbed the reference, but in those cases we won't be stealing the final mntput() from anything that would care. * mntput_no_expire() doesn't lock anything on the fast path now. Incidentally, SMP and UP cases are handled the same way - no ifdefs there. * normal pathname resolution does *not* do any writes to mount_lock. It does, of course, bump the refcounts of vfsmount and dentry in the very end, but that's it. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-09-30 02:06:07 +00:00
if (likely(!read_seqretry(&mount_lock, seq)))
return 0;
RCU'd vfsmounts * RCU-delayed freeing of vfsmounts * vfsmount_lock replaced with a seqlock (mount_lock) * sequence number from mount_lock is stored in nameidata->m_seq and used when we exit RCU mode * new vfsmount flag - MNT_SYNC_UMOUNT. Set by umount_tree() when its caller knows that vfsmount will have no surviving references. * synchronize_rcu() done between unlocking namespace_sem in namespace_unlock() and doing pending mntput(). * new helper: legitimize_mnt(mnt, seq). Checks the mount_lock sequence number against seq, then grabs reference to mnt. Then it rechecks mount_lock again to close the race and either returns success or drops the reference it has acquired. The subtle point is that in case of MNT_SYNC_UMOUNT we can simply decrement the refcount and sod off - aforementioned synchronize_rcu() makes sure that final mntput() won't come until we leave RCU mode. We need that, since we don't want to end up with some lazy pathwalk racing with umount() and stealing the final mntput() from it - caller of umount() may expect it to return only once the fs is shut down and we don't want to break that. In other cases (i.e. with MNT_SYNC_UMOUNT absent) we have to do full-blown mntput() in case of mount_lock sequence number mismatch happening just as we'd grabbed the reference, but in those cases we won't be stealing the final mntput() from anything that would care. * mntput_no_expire() doesn't lock anything on the fast path now. Incidentally, SMP and UP cases are handled the same way - no ifdefs there. * normal pathname resolution does *not* do any writes to mount_lock. It does, of course, bump the refcounts of vfsmount and dentry in the very end, but that's it. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-09-30 02:06:07 +00:00
if (bastard->mnt_flags & MNT_SYNC_UMOUNT) {
mnt_add_count(mnt, -1);
return 1;
}
fix __legitimize_mnt()/mntput() race __legitimize_mnt() has two problems - one is that in case of success the check of mount_lock is not ordered wrt preceding increment of refcount, making it possible to have successful __legitimize_mnt() on one CPU just before the otherwise final mntpu() on another, with __legitimize_mnt() not seeing mntput() taking the lock and mntput() not seeing the increment done by __legitimize_mnt(). Solved by a pair of barriers. Another is that failure of __legitimize_mnt() on the second read_seqretry() leaves us with reference that'll need to be dropped by caller; however, if that races with final mntput() we can end up with caller dropping rcu_read_lock() and doing mntput() to release that reference - with the first mntput() having freed the damn thing just as rcu_read_lock() had been dropped. Solution: in "do mntput() yourself" failure case grab mount_lock, check if MNT_DOOMED has been set by racing final mntput() that has missed our increment and if it has - undo the increment and treat that as "failure, caller doesn't need to drop anything" case. It's not easy to hit - the final mntput() has to come right after the first read_seqretry() in __legitimize_mnt() *and* manage to miss the increment done by __legitimize_mnt() before the second read_seqretry() in there. The things that are almost impossible to hit on bare hardware are not impossible on SMP KVM, though... Reported-by: Oleg Nesterov <oleg@redhat.com> Fixes: 48a066e72d97 ("RCU'd vsfmounts") Cc: stable@vger.kernel.org Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2018-08-09 21:51:32 +00:00
lock_mount_hash();
if (unlikely(bastard->mnt_flags & MNT_DOOMED)) {
mnt_add_count(mnt, -1);
unlock_mount_hash();
return 1;
}
unlock_mount_hash();
/* caller will mntput() */
return -1;
}
/* call under rcu_read_lock */
static bool legitimize_mnt(struct vfsmount *bastard, unsigned seq)
{
int res = __legitimize_mnt(bastard, seq);
if (likely(!res))
return true;
if (unlikely(res < 0)) {
rcu_read_unlock();
mntput(bastard);
rcu_read_lock();
RCU'd vfsmounts * RCU-delayed freeing of vfsmounts * vfsmount_lock replaced with a seqlock (mount_lock) * sequence number from mount_lock is stored in nameidata->m_seq and used when we exit RCU mode * new vfsmount flag - MNT_SYNC_UMOUNT. Set by umount_tree() when its caller knows that vfsmount will have no surviving references. * synchronize_rcu() done between unlocking namespace_sem in namespace_unlock() and doing pending mntput(). * new helper: legitimize_mnt(mnt, seq). Checks the mount_lock sequence number against seq, then grabs reference to mnt. Then it rechecks mount_lock again to close the race and either returns success or drops the reference it has acquired. The subtle point is that in case of MNT_SYNC_UMOUNT we can simply decrement the refcount and sod off - aforementioned synchronize_rcu() makes sure that final mntput() won't come until we leave RCU mode. We need that, since we don't want to end up with some lazy pathwalk racing with umount() and stealing the final mntput() from it - caller of umount() may expect it to return only once the fs is shut down and we don't want to break that. In other cases (i.e. with MNT_SYNC_UMOUNT absent) we have to do full-blown mntput() in case of mount_lock sequence number mismatch happening just as we'd grabbed the reference, but in those cases we won't be stealing the final mntput() from anything that would care. * mntput_no_expire() doesn't lock anything on the fast path now. Incidentally, SMP and UP cases are handled the same way - no ifdefs there. * normal pathname resolution does *not* do any writes to mount_lock. It does, of course, bump the refcounts of vfsmount and dentry in the very end, but that's it. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-09-30 02:06:07 +00:00
}
return false;
}
fs: properly document __lookup_mnt() The comment on top of __lookup_mnt() states that it finds the first mount implying that there could be multiple mounts mounted at the same dentry with the same parent. On older kernels "shadow mounts" could be created during mount propagation. So if a mount @m in the destination propagation tree already had a child mount @p mounted at @mp then any mount @n we propagated to @m at the same @mp would be appended after the preexisting mount @p in @mount_hashtable. This was a completely direct way of creating shadow mounts. That direct way is gone but there are still subtle ways to create shadow mounts. For example, when attaching a source mnt @mnt to a shared mount. The root of the source mnt @mnt might be overmounted by a mount @o after we finished path lookup but before we acquired the namespace semaphore to copy the source mount tree @mnt. After we acquired the namespace lock @mnt is copied including @o covering it. After we attach @mnt to a shared mount @dest_mnt we end up propagation it to all it's peer and slaves @d. If @d already has a mount @n mounted on top of it we tuck @mnt beneath @n. This means, we mount @mnt at @d and mount @n on @mnt. Now we have both @o and @n mounted on the same mountpoint at @mnt. Explain this in the documentation as this is pretty subtle. Reviewed-by: Seth Forshee (DigitalOcean) <sforshee@kernel.org> Message-Id: <20230202-fs-move-mount-replace-v4-2-98f3d80d7eaa@kernel.org> Signed-off-by: Christian Brauner <brauner@kernel.org>
2023-05-03 11:18:40 +00:00
/**
* __lookup_mnt - find first child mount
* @mnt: parent mount
* @dentry: mountpoint
*
* If @mnt has a child mount @c mounted @dentry find and return it.
*
* Note that the child mount @c need not be unique. There are cases
* where shadow mounts are created. For example, during mount
* propagation when a source mount @mnt whose root got overmounted by a
* mount @o after path lookup but before @namespace_sem could be
* acquired gets copied and propagated. So @mnt gets copied including
* @o. When @mnt is propagated to a destination mount @d that already
* has another mount @n mounted at the same mountpoint then the source
* mount @mnt will be tucked beneath @n, i.e., @n will be mounted on
* @mnt and @mnt mounted on @d. Now both @n and @o are mounted at @mnt
* on @dentry.
*
* Return: The first child of @mnt mounted @dentry or NULL.
*/
struct mount *__lookup_mnt(struct vfsmount *mnt, struct dentry *dentry)
{
struct hlist_head *head = m_hash(mnt, dentry);
struct mount *p;
hlist_for_each_entry_rcu(p, head, mnt_hash)
if (&p->mnt_parent->mnt == mnt && p->mnt_mountpoint == dentry)
return p;
return NULL;
}
/*
* lookup_mnt - Return the first child mount mounted at path
*
* "First" means first mounted chronologically. If you create the
* following mounts:
*
* mount /dev/sda1 /mnt
* mount /dev/sda2 /mnt
* mount /dev/sda3 /mnt
*
* Then lookup_mnt() on the base /mnt dentry in the root mount will
* return successively the root dentry and vfsmount of /dev/sda1, then
* /dev/sda2, then /dev/sda3, then NULL.
*
* lookup_mnt takes a reference to the found vfsmount.
*/
struct vfsmount *lookup_mnt(const struct path *path)
{
struct mount *child_mnt;
RCU'd vfsmounts * RCU-delayed freeing of vfsmounts * vfsmount_lock replaced with a seqlock (mount_lock) * sequence number from mount_lock is stored in nameidata->m_seq and used when we exit RCU mode * new vfsmount flag - MNT_SYNC_UMOUNT. Set by umount_tree() when its caller knows that vfsmount will have no surviving references. * synchronize_rcu() done between unlocking namespace_sem in namespace_unlock() and doing pending mntput(). * new helper: legitimize_mnt(mnt, seq). Checks the mount_lock sequence number against seq, then grabs reference to mnt. Then it rechecks mount_lock again to close the race and either returns success or drops the reference it has acquired. The subtle point is that in case of MNT_SYNC_UMOUNT we can simply decrement the refcount and sod off - aforementioned synchronize_rcu() makes sure that final mntput() won't come until we leave RCU mode. We need that, since we don't want to end up with some lazy pathwalk racing with umount() and stealing the final mntput() from it - caller of umount() may expect it to return only once the fs is shut down and we don't want to break that. In other cases (i.e. with MNT_SYNC_UMOUNT absent) we have to do full-blown mntput() in case of mount_lock sequence number mismatch happening just as we'd grabbed the reference, but in those cases we won't be stealing the final mntput() from anything that would care. * mntput_no_expire() doesn't lock anything on the fast path now. Incidentally, SMP and UP cases are handled the same way - no ifdefs there. * normal pathname resolution does *not* do any writes to mount_lock. It does, of course, bump the refcounts of vfsmount and dentry in the very end, but that's it. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-09-30 02:06:07 +00:00
struct vfsmount *m;
unsigned seq;
RCU'd vfsmounts * RCU-delayed freeing of vfsmounts * vfsmount_lock replaced with a seqlock (mount_lock) * sequence number from mount_lock is stored in nameidata->m_seq and used when we exit RCU mode * new vfsmount flag - MNT_SYNC_UMOUNT. Set by umount_tree() when its caller knows that vfsmount will have no surviving references. * synchronize_rcu() done between unlocking namespace_sem in namespace_unlock() and doing pending mntput(). * new helper: legitimize_mnt(mnt, seq). Checks the mount_lock sequence number against seq, then grabs reference to mnt. Then it rechecks mount_lock again to close the race and either returns success or drops the reference it has acquired. The subtle point is that in case of MNT_SYNC_UMOUNT we can simply decrement the refcount and sod off - aforementioned synchronize_rcu() makes sure that final mntput() won't come until we leave RCU mode. We need that, since we don't want to end up with some lazy pathwalk racing with umount() and stealing the final mntput() from it - caller of umount() may expect it to return only once the fs is shut down and we don't want to break that. In other cases (i.e. with MNT_SYNC_UMOUNT absent) we have to do full-blown mntput() in case of mount_lock sequence number mismatch happening just as we'd grabbed the reference, but in those cases we won't be stealing the final mntput() from anything that would care. * mntput_no_expire() doesn't lock anything on the fast path now. Incidentally, SMP and UP cases are handled the same way - no ifdefs there. * normal pathname resolution does *not* do any writes to mount_lock. It does, of course, bump the refcounts of vfsmount and dentry in the very end, but that's it. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-09-30 02:06:07 +00:00
rcu_read_lock();
do {
seq = read_seqbegin(&mount_lock);
child_mnt = __lookup_mnt(path->mnt, path->dentry);
m = child_mnt ? &child_mnt->mnt : NULL;
} while (!legitimize_mnt(m, seq));
rcu_read_unlock();
return m;
}
2013-10-05 02:15:13 +00:00
/*
* __is_local_mountpoint - Test to see if dentry is a mountpoint in the
* current mount namespace.
*
* The common case is dentries are not mountpoints at all and that
* test is handled inline. For the slow case when we are actually
* dealing with a mountpoint of some kind, walk through all of the
* mounts in the current mount namespace and test to see if the dentry
* is a mountpoint.
*
* The mount_hashtable is not usable in the context because we
* need to identify all mounts that may be in the current mount
* namespace not just a mount that happens to have some specified
* parent mount.
*/
bool __is_local_mountpoint(struct dentry *dentry)
{
struct mnt_namespace *ns = current->nsproxy->mnt_ns;
struct mount *mnt, *n;
2013-10-05 02:15:13 +00:00
bool is_covered = false;
down_read(&namespace_sem);
rbtree_postorder_for_each_entry_safe(mnt, n, &ns->mounts, mnt_node) {
2013-10-05 02:15:13 +00:00
is_covered = (mnt->mnt_mountpoint == dentry);
if (is_covered)
break;
}
up_read(&namespace_sem);
2013-10-05 02:15:13 +00:00
return is_covered;
}
static struct mountpoint *lookup_mountpoint(struct dentry *dentry)
{
struct hlist_head *chain = mp_hash(dentry);
struct mountpoint *mp;
hlist_for_each_entry(mp, chain, m_hash) {
if (mp->m_dentry == dentry) {
mp->m_count++;
return mp;
}
}
return NULL;
}
mnt: Protect the mountpoint hashtable with mount_lock Protecting the mountpoint hashtable with namespace_sem was sufficient until a call to umount_mnt was added to mntput_no_expire. At which point it became possible for multiple calls of put_mountpoint on the same hash chain to happen on the same time. Kristen Johansen <kjlx@templeofstupid.com> reported: > This can cause a panic when simultaneous callers of put_mountpoint > attempt to free the same mountpoint. This occurs because some callers > hold the mount_hash_lock, while others hold the namespace lock. Some > even hold both. > > In this submitter's case, the panic manifested itself as a GP fault in > put_mountpoint() when it called hlist_del() and attempted to dereference > a m_hash.pprev that had been poisioned by another thread. Al Viro observed that the simple fix is to switch from using the namespace_sem to the mount_lock to protect the mountpoint hash table. I have taken Al's suggested patch moved put_mountpoint in pivot_root (instead of taking mount_lock an additional time), and have replaced new_mountpoint with get_mountpoint a function that does the hash table lookup and addition under the mount_lock. The introduction of get_mounptoint ensures that only the mount_lock is needed to manipulate the mountpoint hashtable. d_set_mounted is modified to only set DCACHE_MOUNTED if it is not already set. This allows get_mountpoint to use the setting of DCACHE_MOUNTED to ensure adding a struct mountpoint for a dentry happens exactly once. Cc: stable@vger.kernel.org Fixes: ce07d891a089 ("mnt: Honor MNT_LOCKED when detaching mounts") Reported-by: Krister Johansen <kjlx@templeofstupid.com> Suggested-by: Al Viro <viro@ZenIV.linux.org.uk> Acked-by: Al Viro <viro@ZenIV.linux.org.uk> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2017-01-03 01:18:43 +00:00
static struct mountpoint *get_mountpoint(struct dentry *dentry)
{
mnt: Protect the mountpoint hashtable with mount_lock Protecting the mountpoint hashtable with namespace_sem was sufficient until a call to umount_mnt was added to mntput_no_expire. At which point it became possible for multiple calls of put_mountpoint on the same hash chain to happen on the same time. Kristen Johansen <kjlx@templeofstupid.com> reported: > This can cause a panic when simultaneous callers of put_mountpoint > attempt to free the same mountpoint. This occurs because some callers > hold the mount_hash_lock, while others hold the namespace lock. Some > even hold both. > > In this submitter's case, the panic manifested itself as a GP fault in > put_mountpoint() when it called hlist_del() and attempted to dereference > a m_hash.pprev that had been poisioned by another thread. Al Viro observed that the simple fix is to switch from using the namespace_sem to the mount_lock to protect the mountpoint hash table. I have taken Al's suggested patch moved put_mountpoint in pivot_root (instead of taking mount_lock an additional time), and have replaced new_mountpoint with get_mountpoint a function that does the hash table lookup and addition under the mount_lock. The introduction of get_mounptoint ensures that only the mount_lock is needed to manipulate the mountpoint hashtable. d_set_mounted is modified to only set DCACHE_MOUNTED if it is not already set. This allows get_mountpoint to use the setting of DCACHE_MOUNTED to ensure adding a struct mountpoint for a dentry happens exactly once. Cc: stable@vger.kernel.org Fixes: ce07d891a089 ("mnt: Honor MNT_LOCKED when detaching mounts") Reported-by: Krister Johansen <kjlx@templeofstupid.com> Suggested-by: Al Viro <viro@ZenIV.linux.org.uk> Acked-by: Al Viro <viro@ZenIV.linux.org.uk> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2017-01-03 01:18:43 +00:00
struct mountpoint *mp, *new = NULL;
int ret;
mnt: Protect the mountpoint hashtable with mount_lock Protecting the mountpoint hashtable with namespace_sem was sufficient until a call to umount_mnt was added to mntput_no_expire. At which point it became possible for multiple calls of put_mountpoint on the same hash chain to happen on the same time. Kristen Johansen <kjlx@templeofstupid.com> reported: > This can cause a panic when simultaneous callers of put_mountpoint > attempt to free the same mountpoint. This occurs because some callers > hold the mount_hash_lock, while others hold the namespace lock. Some > even hold both. > > In this submitter's case, the panic manifested itself as a GP fault in > put_mountpoint() when it called hlist_del() and attempted to dereference > a m_hash.pprev that had been poisioned by another thread. Al Viro observed that the simple fix is to switch from using the namespace_sem to the mount_lock to protect the mountpoint hash table. I have taken Al's suggested patch moved put_mountpoint in pivot_root (instead of taking mount_lock an additional time), and have replaced new_mountpoint with get_mountpoint a function that does the hash table lookup and addition under the mount_lock. The introduction of get_mounptoint ensures that only the mount_lock is needed to manipulate the mountpoint hashtable. d_set_mounted is modified to only set DCACHE_MOUNTED if it is not already set. This allows get_mountpoint to use the setting of DCACHE_MOUNTED to ensure adding a struct mountpoint for a dentry happens exactly once. Cc: stable@vger.kernel.org Fixes: ce07d891a089 ("mnt: Honor MNT_LOCKED when detaching mounts") Reported-by: Krister Johansen <kjlx@templeofstupid.com> Suggested-by: Al Viro <viro@ZenIV.linux.org.uk> Acked-by: Al Viro <viro@ZenIV.linux.org.uk> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2017-01-03 01:18:43 +00:00
if (d_mountpoint(dentry)) {
/* might be worth a WARN_ON() */
if (d_unlinked(dentry))
return ERR_PTR(-ENOENT);
mnt: Protect the mountpoint hashtable with mount_lock Protecting the mountpoint hashtable with namespace_sem was sufficient until a call to umount_mnt was added to mntput_no_expire. At which point it became possible for multiple calls of put_mountpoint on the same hash chain to happen on the same time. Kristen Johansen <kjlx@templeofstupid.com> reported: > This can cause a panic when simultaneous callers of put_mountpoint > attempt to free the same mountpoint. This occurs because some callers > hold the mount_hash_lock, while others hold the namespace lock. Some > even hold both. > > In this submitter's case, the panic manifested itself as a GP fault in > put_mountpoint() when it called hlist_del() and attempted to dereference > a m_hash.pprev that had been poisioned by another thread. Al Viro observed that the simple fix is to switch from using the namespace_sem to the mount_lock to protect the mountpoint hash table. I have taken Al's suggested patch moved put_mountpoint in pivot_root (instead of taking mount_lock an additional time), and have replaced new_mountpoint with get_mountpoint a function that does the hash table lookup and addition under the mount_lock. The introduction of get_mounptoint ensures that only the mount_lock is needed to manipulate the mountpoint hashtable. d_set_mounted is modified to only set DCACHE_MOUNTED if it is not already set. This allows get_mountpoint to use the setting of DCACHE_MOUNTED to ensure adding a struct mountpoint for a dentry happens exactly once. Cc: stable@vger.kernel.org Fixes: ce07d891a089 ("mnt: Honor MNT_LOCKED when detaching mounts") Reported-by: Krister Johansen <kjlx@templeofstupid.com> Suggested-by: Al Viro <viro@ZenIV.linux.org.uk> Acked-by: Al Viro <viro@ZenIV.linux.org.uk> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2017-01-03 01:18:43 +00:00
mountpoint:
read_seqlock_excl(&mount_lock);
mp = lookup_mountpoint(dentry);
read_sequnlock_excl(&mount_lock);
if (mp)
goto done;
}
if (!new)
new = kmalloc(sizeof(struct mountpoint), GFP_KERNEL);
if (!new)
return ERR_PTR(-ENOMEM);
mnt: Protect the mountpoint hashtable with mount_lock Protecting the mountpoint hashtable with namespace_sem was sufficient until a call to umount_mnt was added to mntput_no_expire. At which point it became possible for multiple calls of put_mountpoint on the same hash chain to happen on the same time. Kristen Johansen <kjlx@templeofstupid.com> reported: > This can cause a panic when simultaneous callers of put_mountpoint > attempt to free the same mountpoint. This occurs because some callers > hold the mount_hash_lock, while others hold the namespace lock. Some > even hold both. > > In this submitter's case, the panic manifested itself as a GP fault in > put_mountpoint() when it called hlist_del() and attempted to dereference > a m_hash.pprev that had been poisioned by another thread. Al Viro observed that the simple fix is to switch from using the namespace_sem to the mount_lock to protect the mountpoint hash table. I have taken Al's suggested patch moved put_mountpoint in pivot_root (instead of taking mount_lock an additional time), and have replaced new_mountpoint with get_mountpoint a function that does the hash table lookup and addition under the mount_lock. The introduction of get_mounptoint ensures that only the mount_lock is needed to manipulate the mountpoint hashtable. d_set_mounted is modified to only set DCACHE_MOUNTED if it is not already set. This allows get_mountpoint to use the setting of DCACHE_MOUNTED to ensure adding a struct mountpoint for a dentry happens exactly once. Cc: stable@vger.kernel.org Fixes: ce07d891a089 ("mnt: Honor MNT_LOCKED when detaching mounts") Reported-by: Krister Johansen <kjlx@templeofstupid.com> Suggested-by: Al Viro <viro@ZenIV.linux.org.uk> Acked-by: Al Viro <viro@ZenIV.linux.org.uk> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2017-01-03 01:18:43 +00:00
/* Exactly one processes may set d_mounted */
ret = d_set_mounted(dentry);
mnt: Protect the mountpoint hashtable with mount_lock Protecting the mountpoint hashtable with namespace_sem was sufficient until a call to umount_mnt was added to mntput_no_expire. At which point it became possible for multiple calls of put_mountpoint on the same hash chain to happen on the same time. Kristen Johansen <kjlx@templeofstupid.com> reported: > This can cause a panic when simultaneous callers of put_mountpoint > attempt to free the same mountpoint. This occurs because some callers > hold the mount_hash_lock, while others hold the namespace lock. Some > even hold both. > > In this submitter's case, the panic manifested itself as a GP fault in > put_mountpoint() when it called hlist_del() and attempted to dereference > a m_hash.pprev that had been poisioned by another thread. Al Viro observed that the simple fix is to switch from using the namespace_sem to the mount_lock to protect the mountpoint hash table. I have taken Al's suggested patch moved put_mountpoint in pivot_root (instead of taking mount_lock an additional time), and have replaced new_mountpoint with get_mountpoint a function that does the hash table lookup and addition under the mount_lock. The introduction of get_mounptoint ensures that only the mount_lock is needed to manipulate the mountpoint hashtable. d_set_mounted is modified to only set DCACHE_MOUNTED if it is not already set. This allows get_mountpoint to use the setting of DCACHE_MOUNTED to ensure adding a struct mountpoint for a dentry happens exactly once. Cc: stable@vger.kernel.org Fixes: ce07d891a089 ("mnt: Honor MNT_LOCKED when detaching mounts") Reported-by: Krister Johansen <kjlx@templeofstupid.com> Suggested-by: Al Viro <viro@ZenIV.linux.org.uk> Acked-by: Al Viro <viro@ZenIV.linux.org.uk> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2017-01-03 01:18:43 +00:00
/* Someone else set d_mounted? */
if (ret == -EBUSY)
goto mountpoint;
/* The dentry is not available as a mountpoint? */
mp = ERR_PTR(ret);
if (ret)
goto done;
/* Add the new mountpoint to the hash table */
read_seqlock_excl(&mount_lock);
new->m_dentry = dget(dentry);
mnt: Protect the mountpoint hashtable with mount_lock Protecting the mountpoint hashtable with namespace_sem was sufficient until a call to umount_mnt was added to mntput_no_expire. At which point it became possible for multiple calls of put_mountpoint on the same hash chain to happen on the same time. Kristen Johansen <kjlx@templeofstupid.com> reported: > This can cause a panic when simultaneous callers of put_mountpoint > attempt to free the same mountpoint. This occurs because some callers > hold the mount_hash_lock, while others hold the namespace lock. Some > even hold both. > > In this submitter's case, the panic manifested itself as a GP fault in > put_mountpoint() when it called hlist_del() and attempted to dereference > a m_hash.pprev that had been poisioned by another thread. Al Viro observed that the simple fix is to switch from using the namespace_sem to the mount_lock to protect the mountpoint hash table. I have taken Al's suggested patch moved put_mountpoint in pivot_root (instead of taking mount_lock an additional time), and have replaced new_mountpoint with get_mountpoint a function that does the hash table lookup and addition under the mount_lock. The introduction of get_mounptoint ensures that only the mount_lock is needed to manipulate the mountpoint hashtable. d_set_mounted is modified to only set DCACHE_MOUNTED if it is not already set. This allows get_mountpoint to use the setting of DCACHE_MOUNTED to ensure adding a struct mountpoint for a dentry happens exactly once. Cc: stable@vger.kernel.org Fixes: ce07d891a089 ("mnt: Honor MNT_LOCKED when detaching mounts") Reported-by: Krister Johansen <kjlx@templeofstupid.com> Suggested-by: Al Viro <viro@ZenIV.linux.org.uk> Acked-by: Al Viro <viro@ZenIV.linux.org.uk> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2017-01-03 01:18:43 +00:00
new->m_count = 1;
hlist_add_head(&new->m_hash, mp_hash(dentry));
INIT_HLIST_HEAD(&new->m_list);
read_sequnlock_excl(&mount_lock);
mp = new;
new = NULL;
done:
kfree(new);
return mp;
}
/*
* vfsmount lock must be held. Additionally, the caller is responsible
* for serializing calls for given disposal list.
*/
static void __put_mountpoint(struct mountpoint *mp, struct list_head *list)
{
if (!--mp->m_count) {
struct dentry *dentry = mp->m_dentry;
BUG_ON(!hlist_empty(&mp->m_list));
spin_lock(&dentry->d_lock);
dentry->d_flags &= ~DCACHE_MOUNTED;
spin_unlock(&dentry->d_lock);
dput_to_list(dentry, list);
hlist_del(&mp->m_hash);
kfree(mp);
}
}
/* called with namespace_lock and vfsmount lock */
static void put_mountpoint(struct mountpoint *mp)
{
__put_mountpoint(mp, &ex_mountpoints);
}
static inline int check_mnt(struct mount *mnt)
{
return mnt->mnt_ns == current->nsproxy->mnt_ns;
}
/*
* vfsmount lock must be held for write
*/
static void touch_mnt_namespace(struct mnt_namespace *ns)
{
if (ns) {
ns->event = ++event;
wake_up_interruptible(&ns->poll);
}
}
/*
* vfsmount lock must be held for write
*/
static void __touch_mnt_namespace(struct mnt_namespace *ns)
{
if (ns && ns->event != event) {
ns->event = event;
wake_up_interruptible(&ns->poll);
}
}
/*
* vfsmount lock must be held for write
*/
static struct mountpoint *unhash_mnt(struct mount *mnt)
{
struct mountpoint *mp;
mnt->mnt_parent = mnt;
mnt->mnt_mountpoint = mnt->mnt.mnt_root;
list_del_init(&mnt->mnt_child);
hlist_del_init_rcu(&mnt->mnt_hash);
hlist_del_init(&mnt->mnt_mp_list);
mp = mnt->mnt_mp;
mnt->mnt_mp = NULL;
return mp;
}
/*
* vfsmount lock must be held for write
*/
static void umount_mnt(struct mount *mnt)
{
put_mountpoint(unhash_mnt(mnt));
}
/*
* vfsmount lock must be held for write
*/
void mnt_set_mountpoint(struct mount *mnt,
struct mountpoint *mp,
struct mount *child_mnt)
{
mp->m_count++;
mnt_add_count(mnt, 1); /* essentially, that's mntget */
child_mnt->mnt_mountpoint = mp->m_dentry;
child_mnt->mnt_parent = mnt;
child_mnt->mnt_mp = mp;
hlist_add_head(&child_mnt->mnt_mp_list, &mp->m_list);
}
fs: allow to mount beneath top mount Various distributions are adding or are in the process of adding support for system extensions and in the future configuration extensions through various tools. A more detailed explanation on system and configuration extensions can be found on the manpage which is listed below at [1]. System extension images may – dynamically at runtime — extend the /usr/ and /opt/ directory hierarchies with additional files. This is particularly useful on immutable system images where a /usr/ and/or /opt/ hierarchy residing on a read-only file system shall be extended temporarily at runtime without making any persistent modifications. When one or more system extension images are activated, their /usr/ and /opt/ hierarchies are combined via overlayfs with the same hierarchies of the host OS, and the host /usr/ and /opt/ overmounted with it ("merging"). When they are deactivated, the mount point is disassembled — again revealing the unmodified original host version of the hierarchy ("unmerging"). Merging thus makes the extension's resources suddenly appear below the /usr/ and /opt/ hierarchies as if they were included in the base OS image itself. Unmerging makes them disappear again, leaving in place only the files that were shipped with the base OS image itself. System configuration images are similar but operate on directories containing system or service configuration. On nearly all modern distributions mount propagation plays a crucial role and the rootfs of the OS is a shared mount in a peer group (usually with peer group id 1): TARGET SOURCE FSTYPE PROPAGATION MNT_ID PARENT_ID / / ext4 shared:1 29 1 On such systems all services and containers run in a separate mount namespace and are pivot_root()ed into their rootfs. A separate mount namespace is almost always used as it is the minimal isolation mechanism services have. But usually they are even much more isolated up to the point where they almost become indistinguishable from containers. Mount propagation again plays a crucial role here. The rootfs of all these services is a slave mount to the peer group of the host rootfs. This is done so the service will receive mount propagation events from the host when certain files or directories are updated. In addition, the rootfs of each service, container, and sandbox is also a shared mount in its separate peer group: TARGET SOURCE FSTYPE PROPAGATION MNT_ID PARENT_ID / / ext4 shared:24 master:1 71 47 For people not too familiar with mount propagation, the master:1 means that this is a slave mount to peer group 1. Which as one can see is the host rootfs as indicated by shared:1 above. The shared:24 indicates that the service rootfs is a shared mount in a separate peer group with peer group id 24. A service may run other services. Such nested services will also have a rootfs mount that is a slave to the peer group of the outer service rootfs mount. For containers things are just slighly different. A container's rootfs isn't a slave to the service's or host rootfs' peer group. The rootfs mount of a container is simply a shared mount in its own peer group: TARGET SOURCE FSTYPE PROPAGATION MNT_ID PARENT_ID /home/ubuntu/debian-tree / ext4 shared:99 61 60 So whereas services are isolated OS components a container is treated like a separate world and mount propagation into it is restricted to a single well known mount that is a slave to the peer group of the shared mount /run on the host: TARGET SOURCE FSTYPE PROPAGATION MNT_ID PARENT_ID /propagate/debian-tree /run/host/incoming tmpfs master:5 71 68 Here, the master:5 indicates that this mount is a slave to the peer group with peer group id 5. This allows to propagate mounts into the container and served as a workaround for not being able to insert mounts into mount namespaces directly. But the new mount api does support inserting mounts directly. For the interested reader the blogpost in [2] might be worth reading where I explain the old and the new approach to inserting mounts into mount namespaces. Containers of course, can themselves be run as services. They often run full systems themselves which means they again run services and containers with the exact same propagation settings explained above. The whole system is designed so that it can be easily updated, including all services in various fine-grained ways without having to enter every single service's mount namespace which would be prohibitively expensive. The mount propagation layout has been carefully chosen so it is possible to propagate updates for system extensions and configurations from the host into all services. The simplest model to update the whole system is to mount on top of /usr, /opt, or /etc on the host. The new mount on /usr, /opt, or /etc will then propagate into every service. This works cleanly the first time. However, when the system is updated multiple times it becomes necessary to unmount the first update on /opt, /usr, /etc and then propagate the new update. But this means, there's an interval where the old base system is accessible. This has to be avoided to protect against downgrade attacks. The vfs already exposes a mechanism to userspace whereby mounts can be mounted beneath an existing mount. Such mounts are internally referred to as "tucked". The patch series exposes the ability to mount beneath a top mount through the new MOVE_MOUNT_BENEATH flag for the move_mount() system call. This allows userspace to seamlessly upgrade mounts. After this series the only thing that will have changed is that mounting beneath an existing mount can be done explicitly instead of just implicitly. Today, there are two scenarios where a mount can be mounted beneath an existing mount instead of on top of it: (1) When a service or container is started in a new mount namespace and pivot_root()s into its new rootfs. The way this is done is by mounting the new rootfs beneath the old rootfs: fd_newroot = open("/var/lib/machines/fedora", ...); fd_oldroot = open("/", ...); fchdir(fd_newroot); pivot_root(".", "."); After the pivot_root(".", ".") call the new rootfs is mounted beneath the old rootfs which can then be unmounted to reveal the underlying mount: fchdir(fd_oldroot); umount2(".", MNT_DETACH); Since pivot_root() moves the caller into a new rootfs no mounts must be propagated out of the new rootfs as a consequence of the pivot_root() call. Thus, the mounts cannot be shared. (2) When a mount is propagated to a mount that already has another mount mounted on the same dentry. The easiest example for this is to create a new mount namespace. The following commands will create a mount namespace where the rootfs mount / will be a slave to the peer group of the host rootfs / mount's peer group. IOW, it will receive propagation from the host: mount --make-shared / unshare --mount --propagation=slave Now a new mount on the /mnt dentry in that mount namespace is created. (As it can be confusing it should be spelled out that the tmpfs mount on the /mnt dentry that was just created doesn't propagate back to the host because the rootfs mount / of the mount namespace isn't a peer of the host rootfs.): mount -t tmpfs tmpfs /mnt TARGET SOURCE FSTYPE PROPAGATION └─/mnt tmpfs tmpfs Now another terminal in the host mount namespace can observe that the mount indeed hasn't propagated back to into the host mount namespace. A new mount can now be created on top of the /mnt dentry with the rootfs mount / as its parent: mount --bind /opt /mnt TARGET SOURCE FSTYPE PROPAGATION └─/mnt /dev/sda2[/opt] ext4 shared:1 The mount namespace that was created earlier can now observe that the bind mount created on the host has propagated into it: TARGET SOURCE FSTYPE PROPAGATION └─/mnt /dev/sda2[/opt] ext4 master:1 └─/mnt tmpfs tmpfs But instead of having been mounted on top of the tmpfs mount at the /mnt dentry the /opt mount has been mounted on top of the rootfs mount at the /mnt dentry. And the tmpfs mount has been remounted on top of the propagated /opt mount at the /opt dentry. So in other words, the propagated mount has been mounted beneath the preexisting mount in that mount namespace. Mount namespaces make this easy to illustrate but it's also easy to mount beneath an existing mount in the same mount namespace (The following example assumes a shared rootfs mount / with peer group id 1): mount --bind /opt /opt TARGET SOURCE FSTYPE MNT_ID PARENT_ID PROPAGATION └─/opt /dev/sda2[/opt] ext4 188 29 shared:1 If another mount is mounted on top of the /opt mount at the /opt dentry: mount --bind /tmp /opt The following clunky mount tree will result: TARGET SOURCE FSTYPE MNT_ID PARENT_ID PROPAGATION └─/opt /dev/sda2[/tmp] ext4 405 29 shared:1 └─/opt /dev/sda2[/opt] ext4 188 405 shared:1 └─/opt /dev/sda2[/tmp] ext4 404 188 shared:1 The /tmp mount is mounted beneath the /opt mount and another copy is mounted on top of the /opt mount. This happens because the rootfs / and the /opt mount are shared mounts in the same peer group. When the new /tmp mount is supposed to be mounted at the /opt dentry then the /tmp mount first propagates to the root mount at the /opt dentry. But there already is the /opt mount mounted at the /opt dentry. So the old /opt mount at the /opt dentry will be mounted on top of the new /tmp mount at the /tmp dentry, i.e. @opt->mnt_parent is @tmp and @opt->mnt_mountpoint is /tmp (Note that @opt->mnt_root is /opt which is what shows up as /opt under SOURCE). So again, a mount will be mounted beneath a preexisting mount. (Fwiw, a few iterations of mount --bind /opt /opt in a loop on a shared rootfs is a good example of what could be referred to as mount explosion.) The main point is that such mounts allows userspace to umount a top mount and reveal an underlying mount. So for example, umounting the tmpfs mount on /mnt that was created in example (1) using mount namespaces reveals the /opt mount which was mounted beneath it. In (2) where a mount was mounted beneath the top mount in the same mount namespace unmounting the top mount would unmount both the top mount and the mount beneath. In the process the original mount would be remounted on top of the rootfs mount / at the /opt dentry again. This again, is a result of mount propagation only this time it's umount propagation. However, this can be avoided by simply making the parent mount / of the @opt mount a private or slave mount. Then the top mount and the original mount can be unmounted to reveal the mount beneath. These two examples are fairly arcane and are merely added to make it clear how mount propagation has effects on current and future features. More common use-cases will just be things like: mount -t btrfs /dev/sdA /mnt mount -t xfs /dev/sdB --beneath /mnt umount /mnt after which we'll have updated from a btrfs filesystem to a xfs filesystem without ever revealing the underlying mountpoint. The crux is that the proposed mechanism already exists and that it is so powerful as to cover cases where mounts are supposed to be updated with new versions. Crucially, it offers an important flexibility. Namely that updates to a system may either be forced or can be delayed and the umount of the top mount be left to a service if it is a cooperative one. This adds a new flag to move_mount() that allows to explicitly move a beneath the top mount adhering to the following semantics: * Mounts cannot be mounted beneath the rootfs. This restriction encompasses the rootfs but also chroots via chroot() and pivot_root(). To mount a mount beneath the rootfs or a chroot, pivot_root() can be used as illustrated above. * The source mount must be a private mount to force the kernel to allocate a new, unused peer group id. This isn't a required restriction but a voluntary one. It avoids repeating a semantical quirk that already exists today. If bind mounts which already have a peer group id are inserted into mount trees that have the same peer group id this can cause a lot of mount propagation events to be generated (For example, consider running mount --bind /opt /opt in a loop where the parent mount is a shared mount.). * Avoid getting rid of the top mount in the kernel. Cooperative services need to be able to unmount the top mount themselves. This also avoids a good deal of additional complexity. The umount would have to be propagated which would be another rather expensive operation. So namespace_lock() and lock_mount_hash() would potentially have to be held for a long time for both a mount and umount propagation. That should be avoided. * The path to mount beneath must be mounted and attached. * The top mount and its parent must be in the caller's mount namespace and the caller must be able to mount in that mount namespace. * The caller must be able to unmount the top mount to prove that they could reveal the underlying mount. * The propagation tree is calculated based on the destination mount's parent mount and the destination mount's mountpoint on the parent mount. Of course, if the parent of the destination mount and the destination mount are shared mounts in the same peer group and the mountpoint of the new mount to be mounted is a subdir of their ->mnt_root then both will receive a mount of /opt. That's probably easier to understand with an example. Assuming a standard shared rootfs /: mount --bind /opt /opt mount --bind /tmp /opt will cause the same mount tree as: mount --bind /opt /opt mount --beneath /tmp /opt because both / and /opt are shared mounts/peers in the same peer group and the /opt dentry is a subdirectory of both the parent's and the child's ->mnt_root. If a mount tree like that is created it almost always is an accident or abuse of mount propagation. Realistically what most people probably mean in this scenarios is: mount --bind /opt /opt mount --make-private /opt mount --make-shared /opt This forces the allocation of a new separate peer group for the /opt mount. Aferwards a mount --bind or mount --beneath actually makes sense as the / and /opt mount belong to different peer groups. Before that it's likely just confusion about what the user wanted to achieve. * Refuse MOVE_MOUNT_BENEATH if: (1) the @mnt_from has been overmounted in between path resolution and acquiring @namespace_sem when locking @mnt_to. This avoids the proliferation of shadow mounts. (2) if @to_mnt is moved to a different mountpoint while acquiring @namespace_sem to lock @to_mnt. (3) if @to_mnt is unmounted while acquiring @namespace_sem to lock @to_mnt. (4) if the parent of the target mount propagates to the target mount at the same mountpoint. This would mean mounting @mnt_from on @mnt_to->mnt_parent and then propagating a copy @c of @mnt_from onto @mnt_to. This defeats the whole purpose of mounting @mnt_from beneath @mnt_to. (5) if the parent mount @mnt_to->mnt_parent propagates to @mnt_from at the same mountpoint. If @mnt_to->mnt_parent propagates to @mnt_from this would mean propagating a copy @c of @mnt_from on top of @mnt_from. Afterwards @mnt_from would be mounted on top of @mnt_to->mnt_parent and @mnt_to would be unmounted from @mnt->mnt_parent and remounted on @mnt_from. But since @c is already mounted on @mnt_from, @mnt_to would ultimately be remounted on top of @c. Afterwards, @mnt_from would be covered by a copy @c of @mnt_from and @c would be covered by @mnt_from itself. This defeats the whole purpose of mounting @mnt_from beneath @mnt_to. Cases (1) to (3) are required as they deal with races that would cause bugs or unexpected behavior for users. Cases (4) and (5) refuse semantical quirks that would not be a bug but would cause weird mount trees to be created. While they can already be created via other means (mount --bind /opt /opt x n) there's no reason to repeat past mistakes in new features. Link: https://man7.org/linux/man-pages/man8/systemd-sysext.8.html [1] Link: https://brauner.io/2023/02/28/mounting-into-mount-namespaces.html [2] Link: https://github.com/flatcar/sysext-bakery Link: https://fedoraproject.org/wiki/Changes/Unified_Kernel_Support_Phase_1 Link: https://fedoraproject.org/wiki/Changes/Unified_Kernel_Support_Phase_2 Link: https://github.com/systemd/systemd/pull/26013 Reviewed-by: Seth Forshee (DigitalOcean) <sforshee@kernel.org> Message-Id: <20230202-fs-move-mount-replace-v4-4-98f3d80d7eaa@kernel.org> Signed-off-by: Christian Brauner <brauner@kernel.org>
2023-05-03 11:18:42 +00:00
/**
* mnt_set_mountpoint_beneath - mount a mount beneath another one
*
* @new_parent: the source mount
* @top_mnt: the mount beneath which @new_parent is mounted
* @new_mp: the new mountpoint of @top_mnt on @new_parent
*
* Remove @top_mnt from its current mountpoint @top_mnt->mnt_mp and
* parent @top_mnt->mnt_parent and mount it on top of @new_parent at
* @new_mp. And mount @new_parent on the old parent and old
* mountpoint of @top_mnt.
*
* Context: This function expects namespace_lock() and lock_mount_hash()
* to have been acquired in that order.
*/
static void mnt_set_mountpoint_beneath(struct mount *new_parent,
struct mount *top_mnt,
struct mountpoint *new_mp)
{
struct mount *old_top_parent = top_mnt->mnt_parent;
struct mountpoint *old_top_mp = top_mnt->mnt_mp;
mnt_set_mountpoint(old_top_parent, old_top_mp, new_parent);
mnt_change_mountpoint(new_parent, new_mp, top_mnt);
}
mnt: Tuck mounts under others instead of creating shadow/side mounts. Ever since mount propagation was introduced in cases where a mount in propagated to parent mount mountpoint pair that is already in use the code has placed the new mount behind the old mount in the mount hash table. This implementation detail is problematic as it allows creating arbitrary length mount hash chains. Furthermore it invalidates the constraint maintained elsewhere in the mount code that a parent mount and a mountpoint pair will have exactly one mount upon them. Making it hard to deal with and to talk about this special case in the mount code. Modify mount propagation to notice when there is already a mount at the parent mount and mountpoint where a new mount is propagating to and place that preexisting mount on top of the new mount. Modify unmount propagation to notice when a mount that is being unmounted has another mount on top of it (and no other children), and to replace the unmounted mount with the mount on top of it. Move the MNT_UMUONT test from __lookup_mnt_last into __propagate_umount as that is the only call of __lookup_mnt_last where MNT_UMOUNT may be set on any mount visible in the mount hash table. These modifications allow: - __lookup_mnt_last to be removed. - attach_shadows to be renamed __attach_mnt and its shadow handling to be removed. - commit_tree to be simplified - copy_tree to be simplified The result is an easier to understand tree of mounts that does not allow creation of arbitrary length hash chains in the mount hash table. The result is also a very slight userspace visible difference in semantics. The following two cases now behave identically, where before order mattered: case 1: (explicit user action) B is a slave of A mount something on A/a , it will propagate to B/a and than mount something on B/a case 2: (tucked mount) B is a slave of A mount something on B/a and than mount something on A/a Histroically umount A/a would fail in case 1 and succeed in case 2. Now umount A/a succeeds in both configurations. This very small change in semantics appears if anything to be a bug fix to me and my survey of userspace leads me to believe that no programs will notice or care of this subtle semantic change. v2: Updated to mnt_change_mountpoint to not call dput or mntput and instead to decrement the counts directly. It is guaranteed that there will be other references when mnt_change_mountpoint is called so this is safe. v3: Moved put_mountpoint under mount_lock in attach_recursive_mnt As the locking in fs/namespace.c changed between v2 and v3. v4: Reworked the logic in propagate_mount_busy and __propagate_umount that detects when a mount completely covers another mount. v5: Removed unnecessary tests whose result is alwasy true in find_topper and attach_recursive_mnt. v6: Document the user space visible semantic difference. Cc: stable@vger.kernel.org Fixes: b90fa9ae8f51 ("[PATCH] shared mount handling: bind and rbind") Tested-by: Andrei Vagin <avagin@virtuozzo.com> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2017-01-20 05:28:35 +00:00
static void __attach_mnt(struct mount *mnt, struct mount *parent)
{
hlist_add_head_rcu(&mnt->mnt_hash,
m_hash(&parent->mnt, mnt->mnt_mountpoint));
list_add_tail(&mnt->mnt_child, &parent->mnt_mounts);
}
fs: allow to mount beneath top mount Various distributions are adding or are in the process of adding support for system extensions and in the future configuration extensions through various tools. A more detailed explanation on system and configuration extensions can be found on the manpage which is listed below at [1]. System extension images may – dynamically at runtime — extend the /usr/ and /opt/ directory hierarchies with additional files. This is particularly useful on immutable system images where a /usr/ and/or /opt/ hierarchy residing on a read-only file system shall be extended temporarily at runtime without making any persistent modifications. When one or more system extension images are activated, their /usr/ and /opt/ hierarchies are combined via overlayfs with the same hierarchies of the host OS, and the host /usr/ and /opt/ overmounted with it ("merging"). When they are deactivated, the mount point is disassembled — again revealing the unmodified original host version of the hierarchy ("unmerging"). Merging thus makes the extension's resources suddenly appear below the /usr/ and /opt/ hierarchies as if they were included in the base OS image itself. Unmerging makes them disappear again, leaving in place only the files that were shipped with the base OS image itself. System configuration images are similar but operate on directories containing system or service configuration. On nearly all modern distributions mount propagation plays a crucial role and the rootfs of the OS is a shared mount in a peer group (usually with peer group id 1): TARGET SOURCE FSTYPE PROPAGATION MNT_ID PARENT_ID / / ext4 shared:1 29 1 On such systems all services and containers run in a separate mount namespace and are pivot_root()ed into their rootfs. A separate mount namespace is almost always used as it is the minimal isolation mechanism services have. But usually they are even much more isolated up to the point where they almost become indistinguishable from containers. Mount propagation again plays a crucial role here. The rootfs of all these services is a slave mount to the peer group of the host rootfs. This is done so the service will receive mount propagation events from the host when certain files or directories are updated. In addition, the rootfs of each service, container, and sandbox is also a shared mount in its separate peer group: TARGET SOURCE FSTYPE PROPAGATION MNT_ID PARENT_ID / / ext4 shared:24 master:1 71 47 For people not too familiar with mount propagation, the master:1 means that this is a slave mount to peer group 1. Which as one can see is the host rootfs as indicated by shared:1 above. The shared:24 indicates that the service rootfs is a shared mount in a separate peer group with peer group id 24. A service may run other services. Such nested services will also have a rootfs mount that is a slave to the peer group of the outer service rootfs mount. For containers things are just slighly different. A container's rootfs isn't a slave to the service's or host rootfs' peer group. The rootfs mount of a container is simply a shared mount in its own peer group: TARGET SOURCE FSTYPE PROPAGATION MNT_ID PARENT_ID /home/ubuntu/debian-tree / ext4 shared:99 61 60 So whereas services are isolated OS components a container is treated like a separate world and mount propagation into it is restricted to a single well known mount that is a slave to the peer group of the shared mount /run on the host: TARGET SOURCE FSTYPE PROPAGATION MNT_ID PARENT_ID /propagate/debian-tree /run/host/incoming tmpfs master:5 71 68 Here, the master:5 indicates that this mount is a slave to the peer group with peer group id 5. This allows to propagate mounts into the container and served as a workaround for not being able to insert mounts into mount namespaces directly. But the new mount api does support inserting mounts directly. For the interested reader the blogpost in [2] might be worth reading where I explain the old and the new approach to inserting mounts into mount namespaces. Containers of course, can themselves be run as services. They often run full systems themselves which means they again run services and containers with the exact same propagation settings explained above. The whole system is designed so that it can be easily updated, including all services in various fine-grained ways without having to enter every single service's mount namespace which would be prohibitively expensive. The mount propagation layout has been carefully chosen so it is possible to propagate updates for system extensions and configurations from the host into all services. The simplest model to update the whole system is to mount on top of /usr, /opt, or /etc on the host. The new mount on /usr, /opt, or /etc will then propagate into every service. This works cleanly the first time. However, when the system is updated multiple times it becomes necessary to unmount the first update on /opt, /usr, /etc and then propagate the new update. But this means, there's an interval where the old base system is accessible. This has to be avoided to protect against downgrade attacks. The vfs already exposes a mechanism to userspace whereby mounts can be mounted beneath an existing mount. Such mounts are internally referred to as "tucked". The patch series exposes the ability to mount beneath a top mount through the new MOVE_MOUNT_BENEATH flag for the move_mount() system call. This allows userspace to seamlessly upgrade mounts. After this series the only thing that will have changed is that mounting beneath an existing mount can be done explicitly instead of just implicitly. Today, there are two scenarios where a mount can be mounted beneath an existing mount instead of on top of it: (1) When a service or container is started in a new mount namespace and pivot_root()s into its new rootfs. The way this is done is by mounting the new rootfs beneath the old rootfs: fd_newroot = open("/var/lib/machines/fedora", ...); fd_oldroot = open("/", ...); fchdir(fd_newroot); pivot_root(".", "."); After the pivot_root(".", ".") call the new rootfs is mounted beneath the old rootfs which can then be unmounted to reveal the underlying mount: fchdir(fd_oldroot); umount2(".", MNT_DETACH); Since pivot_root() moves the caller into a new rootfs no mounts must be propagated out of the new rootfs as a consequence of the pivot_root() call. Thus, the mounts cannot be shared. (2) When a mount is propagated to a mount that already has another mount mounted on the same dentry. The easiest example for this is to create a new mount namespace. The following commands will create a mount namespace where the rootfs mount / will be a slave to the peer group of the host rootfs / mount's peer group. IOW, it will receive propagation from the host: mount --make-shared / unshare --mount --propagation=slave Now a new mount on the /mnt dentry in that mount namespace is created. (As it can be confusing it should be spelled out that the tmpfs mount on the /mnt dentry that was just created doesn't propagate back to the host because the rootfs mount / of the mount namespace isn't a peer of the host rootfs.): mount -t tmpfs tmpfs /mnt TARGET SOURCE FSTYPE PROPAGATION └─/mnt tmpfs tmpfs Now another terminal in the host mount namespace can observe that the mount indeed hasn't propagated back to into the host mount namespace. A new mount can now be created on top of the /mnt dentry with the rootfs mount / as its parent: mount --bind /opt /mnt TARGET SOURCE FSTYPE PROPAGATION └─/mnt /dev/sda2[/opt] ext4 shared:1 The mount namespace that was created earlier can now observe that the bind mount created on the host has propagated into it: TARGET SOURCE FSTYPE PROPAGATION └─/mnt /dev/sda2[/opt] ext4 master:1 └─/mnt tmpfs tmpfs But instead of having been mounted on top of the tmpfs mount at the /mnt dentry the /opt mount has been mounted on top of the rootfs mount at the /mnt dentry. And the tmpfs mount has been remounted on top of the propagated /opt mount at the /opt dentry. So in other words, the propagated mount has been mounted beneath the preexisting mount in that mount namespace. Mount namespaces make this easy to illustrate but it's also easy to mount beneath an existing mount in the same mount namespace (The following example assumes a shared rootfs mount / with peer group id 1): mount --bind /opt /opt TARGET SOURCE FSTYPE MNT_ID PARENT_ID PROPAGATION └─/opt /dev/sda2[/opt] ext4 188 29 shared:1 If another mount is mounted on top of the /opt mount at the /opt dentry: mount --bind /tmp /opt The following clunky mount tree will result: TARGET SOURCE FSTYPE MNT_ID PARENT_ID PROPAGATION └─/opt /dev/sda2[/tmp] ext4 405 29 shared:1 └─/opt /dev/sda2[/opt] ext4 188 405 shared:1 └─/opt /dev/sda2[/tmp] ext4 404 188 shared:1 The /tmp mount is mounted beneath the /opt mount and another copy is mounted on top of the /opt mount. This happens because the rootfs / and the /opt mount are shared mounts in the same peer group. When the new /tmp mount is supposed to be mounted at the /opt dentry then the /tmp mount first propagates to the root mount at the /opt dentry. But there already is the /opt mount mounted at the /opt dentry. So the old /opt mount at the /opt dentry will be mounted on top of the new /tmp mount at the /tmp dentry, i.e. @opt->mnt_parent is @tmp and @opt->mnt_mountpoint is /tmp (Note that @opt->mnt_root is /opt which is what shows up as /opt under SOURCE). So again, a mount will be mounted beneath a preexisting mount. (Fwiw, a few iterations of mount --bind /opt /opt in a loop on a shared rootfs is a good example of what could be referred to as mount explosion.) The main point is that such mounts allows userspace to umount a top mount and reveal an underlying mount. So for example, umounting the tmpfs mount on /mnt that was created in example (1) using mount namespaces reveals the /opt mount which was mounted beneath it. In (2) where a mount was mounted beneath the top mount in the same mount namespace unmounting the top mount would unmount both the top mount and the mount beneath. In the process the original mount would be remounted on top of the rootfs mount / at the /opt dentry again. This again, is a result of mount propagation only this time it's umount propagation. However, this can be avoided by simply making the parent mount / of the @opt mount a private or slave mount. Then the top mount and the original mount can be unmounted to reveal the mount beneath. These two examples are fairly arcane and are merely added to make it clear how mount propagation has effects on current and future features. More common use-cases will just be things like: mount -t btrfs /dev/sdA /mnt mount -t xfs /dev/sdB --beneath /mnt umount /mnt after which we'll have updated from a btrfs filesystem to a xfs filesystem without ever revealing the underlying mountpoint. The crux is that the proposed mechanism already exists and that it is so powerful as to cover cases where mounts are supposed to be updated with new versions. Crucially, it offers an important flexibility. Namely that updates to a system may either be forced or can be delayed and the umount of the top mount be left to a service if it is a cooperative one. This adds a new flag to move_mount() that allows to explicitly move a beneath the top mount adhering to the following semantics: * Mounts cannot be mounted beneath the rootfs. This restriction encompasses the rootfs but also chroots via chroot() and pivot_root(). To mount a mount beneath the rootfs or a chroot, pivot_root() can be used as illustrated above. * The source mount must be a private mount to force the kernel to allocate a new, unused peer group id. This isn't a required restriction but a voluntary one. It avoids repeating a semantical quirk that already exists today. If bind mounts which already have a peer group id are inserted into mount trees that have the same peer group id this can cause a lot of mount propagation events to be generated (For example, consider running mount --bind /opt /opt in a loop where the parent mount is a shared mount.). * Avoid getting rid of the top mount in the kernel. Cooperative services need to be able to unmount the top mount themselves. This also avoids a good deal of additional complexity. The umount would have to be propagated which would be another rather expensive operation. So namespace_lock() and lock_mount_hash() would potentially have to be held for a long time for both a mount and umount propagation. That should be avoided. * The path to mount beneath must be mounted and attached. * The top mount and its parent must be in the caller's mount namespace and the caller must be able to mount in that mount namespace. * The caller must be able to unmount the top mount to prove that they could reveal the underlying mount. * The propagation tree is calculated based on the destination mount's parent mount and the destination mount's mountpoint on the parent mount. Of course, if the parent of the destination mount and the destination mount are shared mounts in the same peer group and the mountpoint of the new mount to be mounted is a subdir of their ->mnt_root then both will receive a mount of /opt. That's probably easier to understand with an example. Assuming a standard shared rootfs /: mount --bind /opt /opt mount --bind /tmp /opt will cause the same mount tree as: mount --bind /opt /opt mount --beneath /tmp /opt because both / and /opt are shared mounts/peers in the same peer group and the /opt dentry is a subdirectory of both the parent's and the child's ->mnt_root. If a mount tree like that is created it almost always is an accident or abuse of mount propagation. Realistically what most people probably mean in this scenarios is: mount --bind /opt /opt mount --make-private /opt mount --make-shared /opt This forces the allocation of a new separate peer group for the /opt mount. Aferwards a mount --bind or mount --beneath actually makes sense as the / and /opt mount belong to different peer groups. Before that it's likely just confusion about what the user wanted to achieve. * Refuse MOVE_MOUNT_BENEATH if: (1) the @mnt_from has been overmounted in between path resolution and acquiring @namespace_sem when locking @mnt_to. This avoids the proliferation of shadow mounts. (2) if @to_mnt is moved to a different mountpoint while acquiring @namespace_sem to lock @to_mnt. (3) if @to_mnt is unmounted while acquiring @namespace_sem to lock @to_mnt. (4) if the parent of the target mount propagates to the target mount at the same mountpoint. This would mean mounting @mnt_from on @mnt_to->mnt_parent and then propagating a copy @c of @mnt_from onto @mnt_to. This defeats the whole purpose of mounting @mnt_from beneath @mnt_to. (5) if the parent mount @mnt_to->mnt_parent propagates to @mnt_from at the same mountpoint. If @mnt_to->mnt_parent propagates to @mnt_from this would mean propagating a copy @c of @mnt_from on top of @mnt_from. Afterwards @mnt_from would be mounted on top of @mnt_to->mnt_parent and @mnt_to would be unmounted from @mnt->mnt_parent and remounted on @mnt_from. But since @c is already mounted on @mnt_from, @mnt_to would ultimately be remounted on top of @c. Afterwards, @mnt_from would be covered by a copy @c of @mnt_from and @c would be covered by @mnt_from itself. This defeats the whole purpose of mounting @mnt_from beneath @mnt_to. Cases (1) to (3) are required as they deal with races that would cause bugs or unexpected behavior for users. Cases (4) and (5) refuse semantical quirks that would not be a bug but would cause weird mount trees to be created. While they can already be created via other means (mount --bind /opt /opt x n) there's no reason to repeat past mistakes in new features. Link: https://man7.org/linux/man-pages/man8/systemd-sysext.8.html [1] Link: https://brauner.io/2023/02/28/mounting-into-mount-namespaces.html [2] Link: https://github.com/flatcar/sysext-bakery Link: https://fedoraproject.org/wiki/Changes/Unified_Kernel_Support_Phase_1 Link: https://fedoraproject.org/wiki/Changes/Unified_Kernel_Support_Phase_2 Link: https://github.com/systemd/systemd/pull/26013 Reviewed-by: Seth Forshee (DigitalOcean) <sforshee@kernel.org> Message-Id: <20230202-fs-move-mount-replace-v4-4-98f3d80d7eaa@kernel.org> Signed-off-by: Christian Brauner <brauner@kernel.org>
2023-05-03 11:18:42 +00:00
/**
* attach_mnt - mount a mount, attach to @mount_hashtable and parent's
* list of child mounts
* @parent: the parent
* @mnt: the new mount
* @mp: the new mountpoint
* @beneath: whether to mount @mnt beneath or on top of @parent
*
* If @beneath is false, mount @mnt at @mp on @parent. Then attach @mnt
* to @parent's child mount list and to @mount_hashtable.
*
* If @beneath is true, remove @mnt from its current parent and
* mountpoint and mount it on @mp on @parent, and mount @parent on the
* old parent and old mountpoint of @mnt. Finally, attach @parent to
* @mnt_hashtable and @parent->mnt_parent->mnt_mounts.
*
* Note, when __attach_mnt() is called @mnt->mnt_parent already points
* to the correct parent.
*
* Context: This function expects namespace_lock() and lock_mount_hash()
* to have been acquired in that order.
*/
fs: allow to mount beneath top mount Various distributions are adding or are in the process of adding support for system extensions and in the future configuration extensions through various tools. A more detailed explanation on system and configuration extensions can be found on the manpage which is listed below at [1]. System extension images may – dynamically at runtime — extend the /usr/ and /opt/ directory hierarchies with additional files. This is particularly useful on immutable system images where a /usr/ and/or /opt/ hierarchy residing on a read-only file system shall be extended temporarily at runtime without making any persistent modifications. When one or more system extension images are activated, their /usr/ and /opt/ hierarchies are combined via overlayfs with the same hierarchies of the host OS, and the host /usr/ and /opt/ overmounted with it ("merging"). When they are deactivated, the mount point is disassembled — again revealing the unmodified original host version of the hierarchy ("unmerging"). Merging thus makes the extension's resources suddenly appear below the /usr/ and /opt/ hierarchies as if they were included in the base OS image itself. Unmerging makes them disappear again, leaving in place only the files that were shipped with the base OS image itself. System configuration images are similar but operate on directories containing system or service configuration. On nearly all modern distributions mount propagation plays a crucial role and the rootfs of the OS is a shared mount in a peer group (usually with peer group id 1): TARGET SOURCE FSTYPE PROPAGATION MNT_ID PARENT_ID / / ext4 shared:1 29 1 On such systems all services and containers run in a separate mount namespace and are pivot_root()ed into their rootfs. A separate mount namespace is almost always used as it is the minimal isolation mechanism services have. But usually they are even much more isolated up to the point where they almost become indistinguishable from containers. Mount propagation again plays a crucial role here. The rootfs of all these services is a slave mount to the peer group of the host rootfs. This is done so the service will receive mount propagation events from the host when certain files or directories are updated. In addition, the rootfs of each service, container, and sandbox is also a shared mount in its separate peer group: TARGET SOURCE FSTYPE PROPAGATION MNT_ID PARENT_ID / / ext4 shared:24 master:1 71 47 For people not too familiar with mount propagation, the master:1 means that this is a slave mount to peer group 1. Which as one can see is the host rootfs as indicated by shared:1 above. The shared:24 indicates that the service rootfs is a shared mount in a separate peer group with peer group id 24. A service may run other services. Such nested services will also have a rootfs mount that is a slave to the peer group of the outer service rootfs mount. For containers things are just slighly different. A container's rootfs isn't a slave to the service's or host rootfs' peer group. The rootfs mount of a container is simply a shared mount in its own peer group: TARGET SOURCE FSTYPE PROPAGATION MNT_ID PARENT_ID /home/ubuntu/debian-tree / ext4 shared:99 61 60 So whereas services are isolated OS components a container is treated like a separate world and mount propagation into it is restricted to a single well known mount that is a slave to the peer group of the shared mount /run on the host: TARGET SOURCE FSTYPE PROPAGATION MNT_ID PARENT_ID /propagate/debian-tree /run/host/incoming tmpfs master:5 71 68 Here, the master:5 indicates that this mount is a slave to the peer group with peer group id 5. This allows to propagate mounts into the container and served as a workaround for not being able to insert mounts into mount namespaces directly. But the new mount api does support inserting mounts directly. For the interested reader the blogpost in [2] might be worth reading where I explain the old and the new approach to inserting mounts into mount namespaces. Containers of course, can themselves be run as services. They often run full systems themselves which means they again run services and containers with the exact same propagation settings explained above. The whole system is designed so that it can be easily updated, including all services in various fine-grained ways without having to enter every single service's mount namespace which would be prohibitively expensive. The mount propagation layout has been carefully chosen so it is possible to propagate updates for system extensions and configurations from the host into all services. The simplest model to update the whole system is to mount on top of /usr, /opt, or /etc on the host. The new mount on /usr, /opt, or /etc will then propagate into every service. This works cleanly the first time. However, when the system is updated multiple times it becomes necessary to unmount the first update on /opt, /usr, /etc and then propagate the new update. But this means, there's an interval where the old base system is accessible. This has to be avoided to protect against downgrade attacks. The vfs already exposes a mechanism to userspace whereby mounts can be mounted beneath an existing mount. Such mounts are internally referred to as "tucked". The patch series exposes the ability to mount beneath a top mount through the new MOVE_MOUNT_BENEATH flag for the move_mount() system call. This allows userspace to seamlessly upgrade mounts. After this series the only thing that will have changed is that mounting beneath an existing mount can be done explicitly instead of just implicitly. Today, there are two scenarios where a mount can be mounted beneath an existing mount instead of on top of it: (1) When a service or container is started in a new mount namespace and pivot_root()s into its new rootfs. The way this is done is by mounting the new rootfs beneath the old rootfs: fd_newroot = open("/var/lib/machines/fedora", ...); fd_oldroot = open("/", ...); fchdir(fd_newroot); pivot_root(".", "."); After the pivot_root(".", ".") call the new rootfs is mounted beneath the old rootfs which can then be unmounted to reveal the underlying mount: fchdir(fd_oldroot); umount2(".", MNT_DETACH); Since pivot_root() moves the caller into a new rootfs no mounts must be propagated out of the new rootfs as a consequence of the pivot_root() call. Thus, the mounts cannot be shared. (2) When a mount is propagated to a mount that already has another mount mounted on the same dentry. The easiest example for this is to create a new mount namespace. The following commands will create a mount namespace where the rootfs mount / will be a slave to the peer group of the host rootfs / mount's peer group. IOW, it will receive propagation from the host: mount --make-shared / unshare --mount --propagation=slave Now a new mount on the /mnt dentry in that mount namespace is created. (As it can be confusing it should be spelled out that the tmpfs mount on the /mnt dentry that was just created doesn't propagate back to the host because the rootfs mount / of the mount namespace isn't a peer of the host rootfs.): mount -t tmpfs tmpfs /mnt TARGET SOURCE FSTYPE PROPAGATION └─/mnt tmpfs tmpfs Now another terminal in the host mount namespace can observe that the mount indeed hasn't propagated back to into the host mount namespace. A new mount can now be created on top of the /mnt dentry with the rootfs mount / as its parent: mount --bind /opt /mnt TARGET SOURCE FSTYPE PROPAGATION └─/mnt /dev/sda2[/opt] ext4 shared:1 The mount namespace that was created earlier can now observe that the bind mount created on the host has propagated into it: TARGET SOURCE FSTYPE PROPAGATION └─/mnt /dev/sda2[/opt] ext4 master:1 └─/mnt tmpfs tmpfs But instead of having been mounted on top of the tmpfs mount at the /mnt dentry the /opt mount has been mounted on top of the rootfs mount at the /mnt dentry. And the tmpfs mount has been remounted on top of the propagated /opt mount at the /opt dentry. So in other words, the propagated mount has been mounted beneath the preexisting mount in that mount namespace. Mount namespaces make this easy to illustrate but it's also easy to mount beneath an existing mount in the same mount namespace (The following example assumes a shared rootfs mount / with peer group id 1): mount --bind /opt /opt TARGET SOURCE FSTYPE MNT_ID PARENT_ID PROPAGATION └─/opt /dev/sda2[/opt] ext4 188 29 shared:1 If another mount is mounted on top of the /opt mount at the /opt dentry: mount --bind /tmp /opt The following clunky mount tree will result: TARGET SOURCE FSTYPE MNT_ID PARENT_ID PROPAGATION └─/opt /dev/sda2[/tmp] ext4 405 29 shared:1 └─/opt /dev/sda2[/opt] ext4 188 405 shared:1 └─/opt /dev/sda2[/tmp] ext4 404 188 shared:1 The /tmp mount is mounted beneath the /opt mount and another copy is mounted on top of the /opt mount. This happens because the rootfs / and the /opt mount are shared mounts in the same peer group. When the new /tmp mount is supposed to be mounted at the /opt dentry then the /tmp mount first propagates to the root mount at the /opt dentry. But there already is the /opt mount mounted at the /opt dentry. So the old /opt mount at the /opt dentry will be mounted on top of the new /tmp mount at the /tmp dentry, i.e. @opt->mnt_parent is @tmp and @opt->mnt_mountpoint is /tmp (Note that @opt->mnt_root is /opt which is what shows up as /opt under SOURCE). So again, a mount will be mounted beneath a preexisting mount. (Fwiw, a few iterations of mount --bind /opt /opt in a loop on a shared rootfs is a good example of what could be referred to as mount explosion.) The main point is that such mounts allows userspace to umount a top mount and reveal an underlying mount. So for example, umounting the tmpfs mount on /mnt that was created in example (1) using mount namespaces reveals the /opt mount which was mounted beneath it. In (2) where a mount was mounted beneath the top mount in the same mount namespace unmounting the top mount would unmount both the top mount and the mount beneath. In the process the original mount would be remounted on top of the rootfs mount / at the /opt dentry again. This again, is a result of mount propagation only this time it's umount propagation. However, this can be avoided by simply making the parent mount / of the @opt mount a private or slave mount. Then the top mount and the original mount can be unmounted to reveal the mount beneath. These two examples are fairly arcane and are merely added to make it clear how mount propagation has effects on current and future features. More common use-cases will just be things like: mount -t btrfs /dev/sdA /mnt mount -t xfs /dev/sdB --beneath /mnt umount /mnt after which we'll have updated from a btrfs filesystem to a xfs filesystem without ever revealing the underlying mountpoint. The crux is that the proposed mechanism already exists and that it is so powerful as to cover cases where mounts are supposed to be updated with new versions. Crucially, it offers an important flexibility. Namely that updates to a system may either be forced or can be delayed and the umount of the top mount be left to a service if it is a cooperative one. This adds a new flag to move_mount() that allows to explicitly move a beneath the top mount adhering to the following semantics: * Mounts cannot be mounted beneath the rootfs. This restriction encompasses the rootfs but also chroots via chroot() and pivot_root(). To mount a mount beneath the rootfs or a chroot, pivot_root() can be used as illustrated above. * The source mount must be a private mount to force the kernel to allocate a new, unused peer group id. This isn't a required restriction but a voluntary one. It avoids repeating a semantical quirk that already exists today. If bind mounts which already have a peer group id are inserted into mount trees that have the same peer group id this can cause a lot of mount propagation events to be generated (For example, consider running mount --bind /opt /opt in a loop where the parent mount is a shared mount.). * Avoid getting rid of the top mount in the kernel. Cooperative services need to be able to unmount the top mount themselves. This also avoids a good deal of additional complexity. The umount would have to be propagated which would be another rather expensive operation. So namespace_lock() and lock_mount_hash() would potentially have to be held for a long time for both a mount and umount propagation. That should be avoided. * The path to mount beneath must be mounted and attached. * The top mount and its parent must be in the caller's mount namespace and the caller must be able to mount in that mount namespace. * The caller must be able to unmount the top mount to prove that they could reveal the underlying mount. * The propagation tree is calculated based on the destination mount's parent mount and the destination mount's mountpoint on the parent mount. Of course, if the parent of the destination mount and the destination mount are shared mounts in the same peer group and the mountpoint of the new mount to be mounted is a subdir of their ->mnt_root then both will receive a mount of /opt. That's probably easier to understand with an example. Assuming a standard shared rootfs /: mount --bind /opt /opt mount --bind /tmp /opt will cause the same mount tree as: mount --bind /opt /opt mount --beneath /tmp /opt because both / and /opt are shared mounts/peers in the same peer group and the /opt dentry is a subdirectory of both the parent's and the child's ->mnt_root. If a mount tree like that is created it almost always is an accident or abuse of mount propagation. Realistically what most people probably mean in this scenarios is: mount --bind /opt /opt mount --make-private /opt mount --make-shared /opt This forces the allocation of a new separate peer group for the /opt mount. Aferwards a mount --bind or mount --beneath actually makes sense as the / and /opt mount belong to different peer groups. Before that it's likely just confusion about what the user wanted to achieve. * Refuse MOVE_MOUNT_BENEATH if: (1) the @mnt_from has been overmounted in between path resolution and acquiring @namespace_sem when locking @mnt_to. This avoids the proliferation of shadow mounts. (2) if @to_mnt is moved to a different mountpoint while acquiring @namespace_sem to lock @to_mnt. (3) if @to_mnt is unmounted while acquiring @namespace_sem to lock @to_mnt. (4) if the parent of the target mount propagates to the target mount at the same mountpoint. This would mean mounting @mnt_from on @mnt_to->mnt_parent and then propagating a copy @c of @mnt_from onto @mnt_to. This defeats the whole purpose of mounting @mnt_from beneath @mnt_to. (5) if the parent mount @mnt_to->mnt_parent propagates to @mnt_from at the same mountpoint. If @mnt_to->mnt_parent propagates to @mnt_from this would mean propagating a copy @c of @mnt_from on top of @mnt_from. Afterwards @mnt_from would be mounted on top of @mnt_to->mnt_parent and @mnt_to would be unmounted from @mnt->mnt_parent and remounted on @mnt_from. But since @c is already mounted on @mnt_from, @mnt_to would ultimately be remounted on top of @c. Afterwards, @mnt_from would be covered by a copy @c of @mnt_from and @c would be covered by @mnt_from itself. This defeats the whole purpose of mounting @mnt_from beneath @mnt_to. Cases (1) to (3) are required as they deal with races that would cause bugs or unexpected behavior for users. Cases (4) and (5) refuse semantical quirks that would not be a bug but would cause weird mount trees to be created. While they can already be created via other means (mount --bind /opt /opt x n) there's no reason to repeat past mistakes in new features. Link: https://man7.org/linux/man-pages/man8/systemd-sysext.8.html [1] Link: https://brauner.io/2023/02/28/mounting-into-mount-namespaces.html [2] Link: https://github.com/flatcar/sysext-bakery Link: https://fedoraproject.org/wiki/Changes/Unified_Kernel_Support_Phase_1 Link: https://fedoraproject.org/wiki/Changes/Unified_Kernel_Support_Phase_2 Link: https://github.com/systemd/systemd/pull/26013 Reviewed-by: Seth Forshee (DigitalOcean) <sforshee@kernel.org> Message-Id: <20230202-fs-move-mount-replace-v4-4-98f3d80d7eaa@kernel.org> Signed-off-by: Christian Brauner <brauner@kernel.org>
2023-05-03 11:18:42 +00:00
static void attach_mnt(struct mount *mnt, struct mount *parent,
struct mountpoint *mp, bool beneath)
{
fs: allow to mount beneath top mount Various distributions are adding or are in the process of adding support for system extensions and in the future configuration extensions through various tools. A more detailed explanation on system and configuration extensions can be found on the manpage which is listed below at [1]. System extension images may – dynamically at runtime — extend the /usr/ and /opt/ directory hierarchies with additional files. This is particularly useful on immutable system images where a /usr/ and/or /opt/ hierarchy residing on a read-only file system shall be extended temporarily at runtime without making any persistent modifications. When one or more system extension images are activated, their /usr/ and /opt/ hierarchies are combined via overlayfs with the same hierarchies of the host OS, and the host /usr/ and /opt/ overmounted with it ("merging"). When they are deactivated, the mount point is disassembled — again revealing the unmodified original host version of the hierarchy ("unmerging"). Merging thus makes the extension's resources suddenly appear below the /usr/ and /opt/ hierarchies as if they were included in the base OS image itself. Unmerging makes them disappear again, leaving in place only the files that were shipped with the base OS image itself. System configuration images are similar but operate on directories containing system or service configuration. On nearly all modern distributions mount propagation plays a crucial role and the rootfs of the OS is a shared mount in a peer group (usually with peer group id 1): TARGET SOURCE FSTYPE PROPAGATION MNT_ID PARENT_ID / / ext4 shared:1 29 1 On such systems all services and containers run in a separate mount namespace and are pivot_root()ed into their rootfs. A separate mount namespace is almost always used as it is the minimal isolation mechanism services have. But usually they are even much more isolated up to the point where they almost become indistinguishable from containers. Mount propagation again plays a crucial role here. The rootfs of all these services is a slave mount to the peer group of the host rootfs. This is done so the service will receive mount propagation events from the host when certain files or directories are updated. In addition, the rootfs of each service, container, and sandbox is also a shared mount in its separate peer group: TARGET SOURCE FSTYPE PROPAGATION MNT_ID PARENT_ID / / ext4 shared:24 master:1 71 47 For people not too familiar with mount propagation, the master:1 means that this is a slave mount to peer group 1. Which as one can see is the host rootfs as indicated by shared:1 above. The shared:24 indicates that the service rootfs is a shared mount in a separate peer group with peer group id 24. A service may run other services. Such nested services will also have a rootfs mount that is a slave to the peer group of the outer service rootfs mount. For containers things are just slighly different. A container's rootfs isn't a slave to the service's or host rootfs' peer group. The rootfs mount of a container is simply a shared mount in its own peer group: TARGET SOURCE FSTYPE PROPAGATION MNT_ID PARENT_ID /home/ubuntu/debian-tree / ext4 shared:99 61 60 So whereas services are isolated OS components a container is treated like a separate world and mount propagation into it is restricted to a single well known mount that is a slave to the peer group of the shared mount /run on the host: TARGET SOURCE FSTYPE PROPAGATION MNT_ID PARENT_ID /propagate/debian-tree /run/host/incoming tmpfs master:5 71 68 Here, the master:5 indicates that this mount is a slave to the peer group with peer group id 5. This allows to propagate mounts into the container and served as a workaround for not being able to insert mounts into mount namespaces directly. But the new mount api does support inserting mounts directly. For the interested reader the blogpost in [2] might be worth reading where I explain the old and the new approach to inserting mounts into mount namespaces. Containers of course, can themselves be run as services. They often run full systems themselves which means they again run services and containers with the exact same propagation settings explained above. The whole system is designed so that it can be easily updated, including all services in various fine-grained ways without having to enter every single service's mount namespace which would be prohibitively expensive. The mount propagation layout has been carefully chosen so it is possible to propagate updates for system extensions and configurations from the host into all services. The simplest model to update the whole system is to mount on top of /usr, /opt, or /etc on the host. The new mount on /usr, /opt, or /etc will then propagate into every service. This works cleanly the first time. However, when the system is updated multiple times it becomes necessary to unmount the first update on /opt, /usr, /etc and then propagate the new update. But this means, there's an interval where the old base system is accessible. This has to be avoided to protect against downgrade attacks. The vfs already exposes a mechanism to userspace whereby mounts can be mounted beneath an existing mount. Such mounts are internally referred to as "tucked". The patch series exposes the ability to mount beneath a top mount through the new MOVE_MOUNT_BENEATH flag for the move_mount() system call. This allows userspace to seamlessly upgrade mounts. After this series the only thing that will have changed is that mounting beneath an existing mount can be done explicitly instead of just implicitly. Today, there are two scenarios where a mount can be mounted beneath an existing mount instead of on top of it: (1) When a service or container is started in a new mount namespace and pivot_root()s into its new rootfs. The way this is done is by mounting the new rootfs beneath the old rootfs: fd_newroot = open("/var/lib/machines/fedora", ...); fd_oldroot = open("/", ...); fchdir(fd_newroot); pivot_root(".", "."); After the pivot_root(".", ".") call the new rootfs is mounted beneath the old rootfs which can then be unmounted to reveal the underlying mount: fchdir(fd_oldroot); umount2(".", MNT_DETACH); Since pivot_root() moves the caller into a new rootfs no mounts must be propagated out of the new rootfs as a consequence of the pivot_root() call. Thus, the mounts cannot be shared. (2) When a mount is propagated to a mount that already has another mount mounted on the same dentry. The easiest example for this is to create a new mount namespace. The following commands will create a mount namespace where the rootfs mount / will be a slave to the peer group of the host rootfs / mount's peer group. IOW, it will receive propagation from the host: mount --make-shared / unshare --mount --propagation=slave Now a new mount on the /mnt dentry in that mount namespace is created. (As it can be confusing it should be spelled out that the tmpfs mount on the /mnt dentry that was just created doesn't propagate back to the host because the rootfs mount / of the mount namespace isn't a peer of the host rootfs.): mount -t tmpfs tmpfs /mnt TARGET SOURCE FSTYPE PROPAGATION └─/mnt tmpfs tmpfs Now another terminal in the host mount namespace can observe that the mount indeed hasn't propagated back to into the host mount namespace. A new mount can now be created on top of the /mnt dentry with the rootfs mount / as its parent: mount --bind /opt /mnt TARGET SOURCE FSTYPE PROPAGATION └─/mnt /dev/sda2[/opt] ext4 shared:1 The mount namespace that was created earlier can now observe that the bind mount created on the host has propagated into it: TARGET SOURCE FSTYPE PROPAGATION └─/mnt /dev/sda2[/opt] ext4 master:1 └─/mnt tmpfs tmpfs But instead of having been mounted on top of the tmpfs mount at the /mnt dentry the /opt mount has been mounted on top of the rootfs mount at the /mnt dentry. And the tmpfs mount has been remounted on top of the propagated /opt mount at the /opt dentry. So in other words, the propagated mount has been mounted beneath the preexisting mount in that mount namespace. Mount namespaces make this easy to illustrate but it's also easy to mount beneath an existing mount in the same mount namespace (The following example assumes a shared rootfs mount / with peer group id 1): mount --bind /opt /opt TARGET SOURCE FSTYPE MNT_ID PARENT_ID PROPAGATION └─/opt /dev/sda2[/opt] ext4 188 29 shared:1 If another mount is mounted on top of the /opt mount at the /opt dentry: mount --bind /tmp /opt The following clunky mount tree will result: TARGET SOURCE FSTYPE MNT_ID PARENT_ID PROPAGATION └─/opt /dev/sda2[/tmp] ext4 405 29 shared:1 └─/opt /dev/sda2[/opt] ext4 188 405 shared:1 └─/opt /dev/sda2[/tmp] ext4 404 188 shared:1 The /tmp mount is mounted beneath the /opt mount and another copy is mounted on top of the /opt mount. This happens because the rootfs / and the /opt mount are shared mounts in the same peer group. When the new /tmp mount is supposed to be mounted at the /opt dentry then the /tmp mount first propagates to the root mount at the /opt dentry. But there already is the /opt mount mounted at the /opt dentry. So the old /opt mount at the /opt dentry will be mounted on top of the new /tmp mount at the /tmp dentry, i.e. @opt->mnt_parent is @tmp and @opt->mnt_mountpoint is /tmp (Note that @opt->mnt_root is /opt which is what shows up as /opt under SOURCE). So again, a mount will be mounted beneath a preexisting mount. (Fwiw, a few iterations of mount --bind /opt /opt in a loop on a shared rootfs is a good example of what could be referred to as mount explosion.) The main point is that such mounts allows userspace to umount a top mount and reveal an underlying mount. So for example, umounting the tmpfs mount on /mnt that was created in example (1) using mount namespaces reveals the /opt mount which was mounted beneath it. In (2) where a mount was mounted beneath the top mount in the same mount namespace unmounting the top mount would unmount both the top mount and the mount beneath. In the process the original mount would be remounted on top of the rootfs mount / at the /opt dentry again. This again, is a result of mount propagation only this time it's umount propagation. However, this can be avoided by simply making the parent mount / of the @opt mount a private or slave mount. Then the top mount and the original mount can be unmounted to reveal the mount beneath. These two examples are fairly arcane and are merely added to make it clear how mount propagation has effects on current and future features. More common use-cases will just be things like: mount -t btrfs /dev/sdA /mnt mount -t xfs /dev/sdB --beneath /mnt umount /mnt after which we'll have updated from a btrfs filesystem to a xfs filesystem without ever revealing the underlying mountpoint. The crux is that the proposed mechanism already exists and that it is so powerful as to cover cases where mounts are supposed to be updated with new versions. Crucially, it offers an important flexibility. Namely that updates to a system may either be forced or can be delayed and the umount of the top mount be left to a service if it is a cooperative one. This adds a new flag to move_mount() that allows to explicitly move a beneath the top mount adhering to the following semantics: * Mounts cannot be mounted beneath the rootfs. This restriction encompasses the rootfs but also chroots via chroot() and pivot_root(). To mount a mount beneath the rootfs or a chroot, pivot_root() can be used as illustrated above. * The source mount must be a private mount to force the kernel to allocate a new, unused peer group id. This isn't a required restriction but a voluntary one. It avoids repeating a semantical quirk that already exists today. If bind mounts which already have a peer group id are inserted into mount trees that have the same peer group id this can cause a lot of mount propagation events to be generated (For example, consider running mount --bind /opt /opt in a loop where the parent mount is a shared mount.). * Avoid getting rid of the top mount in the kernel. Cooperative services need to be able to unmount the top mount themselves. This also avoids a good deal of additional complexity. The umount would have to be propagated which would be another rather expensive operation. So namespace_lock() and lock_mount_hash() would potentially have to be held for a long time for both a mount and umount propagation. That should be avoided. * The path to mount beneath must be mounted and attached. * The top mount and its parent must be in the caller's mount namespace and the caller must be able to mount in that mount namespace. * The caller must be able to unmount the top mount to prove that they could reveal the underlying mount. * The propagation tree is calculated based on the destination mount's parent mount and the destination mount's mountpoint on the parent mount. Of course, if the parent of the destination mount and the destination mount are shared mounts in the same peer group and the mountpoint of the new mount to be mounted is a subdir of their ->mnt_root then both will receive a mount of /opt. That's probably easier to understand with an example. Assuming a standard shared rootfs /: mount --bind /opt /opt mount --bind /tmp /opt will cause the same mount tree as: mount --bind /opt /opt mount --beneath /tmp /opt because both / and /opt are shared mounts/peers in the same peer group and the /opt dentry is a subdirectory of both the parent's and the child's ->mnt_root. If a mount tree like that is created it almost always is an accident or abuse of mount propagation. Realistically what most people probably mean in this scenarios is: mount --bind /opt /opt mount --make-private /opt mount --make-shared /opt This forces the allocation of a new separate peer group for the /opt mount. Aferwards a mount --bind or mount --beneath actually makes sense as the / and /opt mount belong to different peer groups. Before that it's likely just confusion about what the user wanted to achieve. * Refuse MOVE_MOUNT_BENEATH if: (1) the @mnt_from has been overmounted in between path resolution and acquiring @namespace_sem when locking @mnt_to. This avoids the proliferation of shadow mounts. (2) if @to_mnt is moved to a different mountpoint while acquiring @namespace_sem to lock @to_mnt. (3) if @to_mnt is unmounted while acquiring @namespace_sem to lock @to_mnt. (4) if the parent of the target mount propagates to the target mount at the same mountpoint. This would mean mounting @mnt_from on @mnt_to->mnt_parent and then propagating a copy @c of @mnt_from onto @mnt_to. This defeats the whole purpose of mounting @mnt_from beneath @mnt_to. (5) if the parent mount @mnt_to->mnt_parent propagates to @mnt_from at the same mountpoint. If @mnt_to->mnt_parent propagates to @mnt_from this would mean propagating a copy @c of @mnt_from on top of @mnt_from. Afterwards @mnt_from would be mounted on top of @mnt_to->mnt_parent and @mnt_to would be unmounted from @mnt->mnt_parent and remounted on @mnt_from. But since @c is already mounted on @mnt_from, @mnt_to would ultimately be remounted on top of @c. Afterwards, @mnt_from would be covered by a copy @c of @mnt_from and @c would be covered by @mnt_from itself. This defeats the whole purpose of mounting @mnt_from beneath @mnt_to. Cases (1) to (3) are required as they deal with races that would cause bugs or unexpected behavior for users. Cases (4) and (5) refuse semantical quirks that would not be a bug but would cause weird mount trees to be created. While they can already be created via other means (mount --bind /opt /opt x n) there's no reason to repeat past mistakes in new features. Link: https://man7.org/linux/man-pages/man8/systemd-sysext.8.html [1] Link: https://brauner.io/2023/02/28/mounting-into-mount-namespaces.html [2] Link: https://github.com/flatcar/sysext-bakery Link: https://fedoraproject.org/wiki/Changes/Unified_Kernel_Support_Phase_1 Link: https://fedoraproject.org/wiki/Changes/Unified_Kernel_Support_Phase_2 Link: https://github.com/systemd/systemd/pull/26013 Reviewed-by: Seth Forshee (DigitalOcean) <sforshee@kernel.org> Message-Id: <20230202-fs-move-mount-replace-v4-4-98f3d80d7eaa@kernel.org> Signed-off-by: Christian Brauner <brauner@kernel.org>
2023-05-03 11:18:42 +00:00
if (beneath)
mnt_set_mountpoint_beneath(mnt, parent, mp);
else
mnt_set_mountpoint(parent, mp, mnt);
/*
* Note, @mnt->mnt_parent has to be used. If @mnt was mounted
* beneath @parent then @mnt will need to be attached to
* @parent's old parent, not @parent. IOW, @mnt->mnt_parent
* isn't the same mount as @parent.
*/
__attach_mnt(mnt, mnt->mnt_parent);
}
mnt: Tuck mounts under others instead of creating shadow/side mounts. Ever since mount propagation was introduced in cases where a mount in propagated to parent mount mountpoint pair that is already in use the code has placed the new mount behind the old mount in the mount hash table. This implementation detail is problematic as it allows creating arbitrary length mount hash chains. Furthermore it invalidates the constraint maintained elsewhere in the mount code that a parent mount and a mountpoint pair will have exactly one mount upon them. Making it hard to deal with and to talk about this special case in the mount code. Modify mount propagation to notice when there is already a mount at the parent mount and mountpoint where a new mount is propagating to and place that preexisting mount on top of the new mount. Modify unmount propagation to notice when a mount that is being unmounted has another mount on top of it (and no other children), and to replace the unmounted mount with the mount on top of it. Move the MNT_UMUONT test from __lookup_mnt_last into __propagate_umount as that is the only call of __lookup_mnt_last where MNT_UMOUNT may be set on any mount visible in the mount hash table. These modifications allow: - __lookup_mnt_last to be removed. - attach_shadows to be renamed __attach_mnt and its shadow handling to be removed. - commit_tree to be simplified - copy_tree to be simplified The result is an easier to understand tree of mounts that does not allow creation of arbitrary length hash chains in the mount hash table. The result is also a very slight userspace visible difference in semantics. The following two cases now behave identically, where before order mattered: case 1: (explicit user action) B is a slave of A mount something on A/a , it will propagate to B/a and than mount something on B/a case 2: (tucked mount) B is a slave of A mount something on B/a and than mount something on A/a Histroically umount A/a would fail in case 1 and succeed in case 2. Now umount A/a succeeds in both configurations. This very small change in semantics appears if anything to be a bug fix to me and my survey of userspace leads me to believe that no programs will notice or care of this subtle semantic change. v2: Updated to mnt_change_mountpoint to not call dput or mntput and instead to decrement the counts directly. It is guaranteed that there will be other references when mnt_change_mountpoint is called so this is safe. v3: Moved put_mountpoint under mount_lock in attach_recursive_mnt As the locking in fs/namespace.c changed between v2 and v3. v4: Reworked the logic in propagate_mount_busy and __propagate_umount that detects when a mount completely covers another mount. v5: Removed unnecessary tests whose result is alwasy true in find_topper and attach_recursive_mnt. v6: Document the user space visible semantic difference. Cc: stable@vger.kernel.org Fixes: b90fa9ae8f51 ("[PATCH] shared mount handling: bind and rbind") Tested-by: Andrei Vagin <avagin@virtuozzo.com> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2017-01-20 05:28:35 +00:00
void mnt_change_mountpoint(struct mount *parent, struct mountpoint *mp, struct mount *mnt)
{
mnt: Tuck mounts under others instead of creating shadow/side mounts. Ever since mount propagation was introduced in cases where a mount in propagated to parent mount mountpoint pair that is already in use the code has placed the new mount behind the old mount in the mount hash table. This implementation detail is problematic as it allows creating arbitrary length mount hash chains. Furthermore it invalidates the constraint maintained elsewhere in the mount code that a parent mount and a mountpoint pair will have exactly one mount upon them. Making it hard to deal with and to talk about this special case in the mount code. Modify mount propagation to notice when there is already a mount at the parent mount and mountpoint where a new mount is propagating to and place that preexisting mount on top of the new mount. Modify unmount propagation to notice when a mount that is being unmounted has another mount on top of it (and no other children), and to replace the unmounted mount with the mount on top of it. Move the MNT_UMUONT test from __lookup_mnt_last into __propagate_umount as that is the only call of __lookup_mnt_last where MNT_UMOUNT may be set on any mount visible in the mount hash table. These modifications allow: - __lookup_mnt_last to be removed. - attach_shadows to be renamed __attach_mnt and its shadow handling to be removed. - commit_tree to be simplified - copy_tree to be simplified The result is an easier to understand tree of mounts that does not allow creation of arbitrary length hash chains in the mount hash table. The result is also a very slight userspace visible difference in semantics. The following two cases now behave identically, where before order mattered: case 1: (explicit user action) B is a slave of A mount something on A/a , it will propagate to B/a and than mount something on B/a case 2: (tucked mount) B is a slave of A mount something on B/a and than mount something on A/a Histroically umount A/a would fail in case 1 and succeed in case 2. Now umount A/a succeeds in both configurations. This very small change in semantics appears if anything to be a bug fix to me and my survey of userspace leads me to believe that no programs will notice or care of this subtle semantic change. v2: Updated to mnt_change_mountpoint to not call dput or mntput and instead to decrement the counts directly. It is guaranteed that there will be other references when mnt_change_mountpoint is called so this is safe. v3: Moved put_mountpoint under mount_lock in attach_recursive_mnt As the locking in fs/namespace.c changed between v2 and v3. v4: Reworked the logic in propagate_mount_busy and __propagate_umount that detects when a mount completely covers another mount. v5: Removed unnecessary tests whose result is alwasy true in find_topper and attach_recursive_mnt. v6: Document the user space visible semantic difference. Cc: stable@vger.kernel.org Fixes: b90fa9ae8f51 ("[PATCH] shared mount handling: bind and rbind") Tested-by: Andrei Vagin <avagin@virtuozzo.com> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2017-01-20 05:28:35 +00:00
struct mountpoint *old_mp = mnt->mnt_mp;
struct mount *old_parent = mnt->mnt_parent;
list_del_init(&mnt->mnt_child);
hlist_del_init(&mnt->mnt_mp_list);
hlist_del_init_rcu(&mnt->mnt_hash);
fs: allow to mount beneath top mount Various distributions are adding or are in the process of adding support for system extensions and in the future configuration extensions through various tools. A more detailed explanation on system and configuration extensions can be found on the manpage which is listed below at [1]. System extension images may – dynamically at runtime — extend the /usr/ and /opt/ directory hierarchies with additional files. This is particularly useful on immutable system images where a /usr/ and/or /opt/ hierarchy residing on a read-only file system shall be extended temporarily at runtime without making any persistent modifications. When one or more system extension images are activated, their /usr/ and /opt/ hierarchies are combined via overlayfs with the same hierarchies of the host OS, and the host /usr/ and /opt/ overmounted with it ("merging"). When they are deactivated, the mount point is disassembled — again revealing the unmodified original host version of the hierarchy ("unmerging"). Merging thus makes the extension's resources suddenly appear below the /usr/ and /opt/ hierarchies as if they were included in the base OS image itself. Unmerging makes them disappear again, leaving in place only the files that were shipped with the base OS image itself. System configuration images are similar but operate on directories containing system or service configuration. On nearly all modern distributions mount propagation plays a crucial role and the rootfs of the OS is a shared mount in a peer group (usually with peer group id 1): TARGET SOURCE FSTYPE PROPAGATION MNT_ID PARENT_ID / / ext4 shared:1 29 1 On such systems all services and containers run in a separate mount namespace and are pivot_root()ed into their rootfs. A separate mount namespace is almost always used as it is the minimal isolation mechanism services have. But usually they are even much more isolated up to the point where they almost become indistinguishable from containers. Mount propagation again plays a crucial role here. The rootfs of all these services is a slave mount to the peer group of the host rootfs. This is done so the service will receive mount propagation events from the host when certain files or directories are updated. In addition, the rootfs of each service, container, and sandbox is also a shared mount in its separate peer group: TARGET SOURCE FSTYPE PROPAGATION MNT_ID PARENT_ID / / ext4 shared:24 master:1 71 47 For people not too familiar with mount propagation, the master:1 means that this is a slave mount to peer group 1. Which as one can see is the host rootfs as indicated by shared:1 above. The shared:24 indicates that the service rootfs is a shared mount in a separate peer group with peer group id 24. A service may run other services. Such nested services will also have a rootfs mount that is a slave to the peer group of the outer service rootfs mount. For containers things are just slighly different. A container's rootfs isn't a slave to the service's or host rootfs' peer group. The rootfs mount of a container is simply a shared mount in its own peer group: TARGET SOURCE FSTYPE PROPAGATION MNT_ID PARENT_ID /home/ubuntu/debian-tree / ext4 shared:99 61 60 So whereas services are isolated OS components a container is treated like a separate world and mount propagation into it is restricted to a single well known mount that is a slave to the peer group of the shared mount /run on the host: TARGET SOURCE FSTYPE PROPAGATION MNT_ID PARENT_ID /propagate/debian-tree /run/host/incoming tmpfs master:5 71 68 Here, the master:5 indicates that this mount is a slave to the peer group with peer group id 5. This allows to propagate mounts into the container and served as a workaround for not being able to insert mounts into mount namespaces directly. But the new mount api does support inserting mounts directly. For the interested reader the blogpost in [2] might be worth reading where I explain the old and the new approach to inserting mounts into mount namespaces. Containers of course, can themselves be run as services. They often run full systems themselves which means they again run services and containers with the exact same propagation settings explained above. The whole system is designed so that it can be easily updated, including all services in various fine-grained ways without having to enter every single service's mount namespace which would be prohibitively expensive. The mount propagation layout has been carefully chosen so it is possible to propagate updates for system extensions and configurations from the host into all services. The simplest model to update the whole system is to mount on top of /usr, /opt, or /etc on the host. The new mount on /usr, /opt, or /etc will then propagate into every service. This works cleanly the first time. However, when the system is updated multiple times it becomes necessary to unmount the first update on /opt, /usr, /etc and then propagate the new update. But this means, there's an interval where the old base system is accessible. This has to be avoided to protect against downgrade attacks. The vfs already exposes a mechanism to userspace whereby mounts can be mounted beneath an existing mount. Such mounts are internally referred to as "tucked". The patch series exposes the ability to mount beneath a top mount through the new MOVE_MOUNT_BENEATH flag for the move_mount() system call. This allows userspace to seamlessly upgrade mounts. After this series the only thing that will have changed is that mounting beneath an existing mount can be done explicitly instead of just implicitly. Today, there are two scenarios where a mount can be mounted beneath an existing mount instead of on top of it: (1) When a service or container is started in a new mount namespace and pivot_root()s into its new rootfs. The way this is done is by mounting the new rootfs beneath the old rootfs: fd_newroot = open("/var/lib/machines/fedora", ...); fd_oldroot = open("/", ...); fchdir(fd_newroot); pivot_root(".", "."); After the pivot_root(".", ".") call the new rootfs is mounted beneath the old rootfs which can then be unmounted to reveal the underlying mount: fchdir(fd_oldroot); umount2(".", MNT_DETACH); Since pivot_root() moves the caller into a new rootfs no mounts must be propagated out of the new rootfs as a consequence of the pivot_root() call. Thus, the mounts cannot be shared. (2) When a mount is propagated to a mount that already has another mount mounted on the same dentry. The easiest example for this is to create a new mount namespace. The following commands will create a mount namespace where the rootfs mount / will be a slave to the peer group of the host rootfs / mount's peer group. IOW, it will receive propagation from the host: mount --make-shared / unshare --mount --propagation=slave Now a new mount on the /mnt dentry in that mount namespace is created. (As it can be confusing it should be spelled out that the tmpfs mount on the /mnt dentry that was just created doesn't propagate back to the host because the rootfs mount / of the mount namespace isn't a peer of the host rootfs.): mount -t tmpfs tmpfs /mnt TARGET SOURCE FSTYPE PROPAGATION └─/mnt tmpfs tmpfs Now another terminal in the host mount namespace can observe that the mount indeed hasn't propagated back to into the host mount namespace. A new mount can now be created on top of the /mnt dentry with the rootfs mount / as its parent: mount --bind /opt /mnt TARGET SOURCE FSTYPE PROPAGATION └─/mnt /dev/sda2[/opt] ext4 shared:1 The mount namespace that was created earlier can now observe that the bind mount created on the host has propagated into it: TARGET SOURCE FSTYPE PROPAGATION └─/mnt /dev/sda2[/opt] ext4 master:1 └─/mnt tmpfs tmpfs But instead of having been mounted on top of the tmpfs mount at the /mnt dentry the /opt mount has been mounted on top of the rootfs mount at the /mnt dentry. And the tmpfs mount has been remounted on top of the propagated /opt mount at the /opt dentry. So in other words, the propagated mount has been mounted beneath the preexisting mount in that mount namespace. Mount namespaces make this easy to illustrate but it's also easy to mount beneath an existing mount in the same mount namespace (The following example assumes a shared rootfs mount / with peer group id 1): mount --bind /opt /opt TARGET SOURCE FSTYPE MNT_ID PARENT_ID PROPAGATION └─/opt /dev/sda2[/opt] ext4 188 29 shared:1 If another mount is mounted on top of the /opt mount at the /opt dentry: mount --bind /tmp /opt The following clunky mount tree will result: TARGET SOURCE FSTYPE MNT_ID PARENT_ID PROPAGATION └─/opt /dev/sda2[/tmp] ext4 405 29 shared:1 └─/opt /dev/sda2[/opt] ext4 188 405 shared:1 └─/opt /dev/sda2[/tmp] ext4 404 188 shared:1 The /tmp mount is mounted beneath the /opt mount and another copy is mounted on top of the /opt mount. This happens because the rootfs / and the /opt mount are shared mounts in the same peer group. When the new /tmp mount is supposed to be mounted at the /opt dentry then the /tmp mount first propagates to the root mount at the /opt dentry. But there already is the /opt mount mounted at the /opt dentry. So the old /opt mount at the /opt dentry will be mounted on top of the new /tmp mount at the /tmp dentry, i.e. @opt->mnt_parent is @tmp and @opt->mnt_mountpoint is /tmp (Note that @opt->mnt_root is /opt which is what shows up as /opt under SOURCE). So again, a mount will be mounted beneath a preexisting mount. (Fwiw, a few iterations of mount --bind /opt /opt in a loop on a shared rootfs is a good example of what could be referred to as mount explosion.) The main point is that such mounts allows userspace to umount a top mount and reveal an underlying mount. So for example, umounting the tmpfs mount on /mnt that was created in example (1) using mount namespaces reveals the /opt mount which was mounted beneath it. In (2) where a mount was mounted beneath the top mount in the same mount namespace unmounting the top mount would unmount both the top mount and the mount beneath. In the process the original mount would be remounted on top of the rootfs mount / at the /opt dentry again. This again, is a result of mount propagation only this time it's umount propagation. However, this can be avoided by simply making the parent mount / of the @opt mount a private or slave mount. Then the top mount and the original mount can be unmounted to reveal the mount beneath. These two examples are fairly arcane and are merely added to make it clear how mount propagation has effects on current and future features. More common use-cases will just be things like: mount -t btrfs /dev/sdA /mnt mount -t xfs /dev/sdB --beneath /mnt umount /mnt after which we'll have updated from a btrfs filesystem to a xfs filesystem without ever revealing the underlying mountpoint. The crux is that the proposed mechanism already exists and that it is so powerful as to cover cases where mounts are supposed to be updated with new versions. Crucially, it offers an important flexibility. Namely that updates to a system may either be forced or can be delayed and the umount of the top mount be left to a service if it is a cooperative one. This adds a new flag to move_mount() that allows to explicitly move a beneath the top mount adhering to the following semantics: * Mounts cannot be mounted beneath the rootfs. This restriction encompasses the rootfs but also chroots via chroot() and pivot_root(). To mount a mount beneath the rootfs or a chroot, pivot_root() can be used as illustrated above. * The source mount must be a private mount to force the kernel to allocate a new, unused peer group id. This isn't a required restriction but a voluntary one. It avoids repeating a semantical quirk that already exists today. If bind mounts which already have a peer group id are inserted into mount trees that have the same peer group id this can cause a lot of mount propagation events to be generated (For example, consider running mount --bind /opt /opt in a loop where the parent mount is a shared mount.). * Avoid getting rid of the top mount in the kernel. Cooperative services need to be able to unmount the top mount themselves. This also avoids a good deal of additional complexity. The umount would have to be propagated which would be another rather expensive operation. So namespace_lock() and lock_mount_hash() would potentially have to be held for a long time for both a mount and umount propagation. That should be avoided. * The path to mount beneath must be mounted and attached. * The top mount and its parent must be in the caller's mount namespace and the caller must be able to mount in that mount namespace. * The caller must be able to unmount the top mount to prove that they could reveal the underlying mount. * The propagation tree is calculated based on the destination mount's parent mount and the destination mount's mountpoint on the parent mount. Of course, if the parent of the destination mount and the destination mount are shared mounts in the same peer group and the mountpoint of the new mount to be mounted is a subdir of their ->mnt_root then both will receive a mount of /opt. That's probably easier to understand with an example. Assuming a standard shared rootfs /: mount --bind /opt /opt mount --bind /tmp /opt will cause the same mount tree as: mount --bind /opt /opt mount --beneath /tmp /opt because both / and /opt are shared mounts/peers in the same peer group and the /opt dentry is a subdirectory of both the parent's and the child's ->mnt_root. If a mount tree like that is created it almost always is an accident or abuse of mount propagation. Realistically what most people probably mean in this scenarios is: mount --bind /opt /opt mount --make-private /opt mount --make-shared /opt This forces the allocation of a new separate peer group for the /opt mount. Aferwards a mount --bind or mount --beneath actually makes sense as the / and /opt mount belong to different peer groups. Before that it's likely just confusion about what the user wanted to achieve. * Refuse MOVE_MOUNT_BENEATH if: (1) the @mnt_from has been overmounted in between path resolution and acquiring @namespace_sem when locking @mnt_to. This avoids the proliferation of shadow mounts. (2) if @to_mnt is moved to a different mountpoint while acquiring @namespace_sem to lock @to_mnt. (3) if @to_mnt is unmounted while acquiring @namespace_sem to lock @to_mnt. (4) if the parent of the target mount propagates to the target mount at the same mountpoint. This would mean mounting @mnt_from on @mnt_to->mnt_parent and then propagating a copy @c of @mnt_from onto @mnt_to. This defeats the whole purpose of mounting @mnt_from beneath @mnt_to. (5) if the parent mount @mnt_to->mnt_parent propagates to @mnt_from at the same mountpoint. If @mnt_to->mnt_parent propagates to @mnt_from this would mean propagating a copy @c of @mnt_from on top of @mnt_from. Afterwards @mnt_from would be mounted on top of @mnt_to->mnt_parent and @mnt_to would be unmounted from @mnt->mnt_parent and remounted on @mnt_from. But since @c is already mounted on @mnt_from, @mnt_to would ultimately be remounted on top of @c. Afterwards, @mnt_from would be covered by a copy @c of @mnt_from and @c would be covered by @mnt_from itself. This defeats the whole purpose of mounting @mnt_from beneath @mnt_to. Cases (1) to (3) are required as they deal with races that would cause bugs or unexpected behavior for users. Cases (4) and (5) refuse semantical quirks that would not be a bug but would cause weird mount trees to be created. While they can already be created via other means (mount --bind /opt /opt x n) there's no reason to repeat past mistakes in new features. Link: https://man7.org/linux/man-pages/man8/systemd-sysext.8.html [1] Link: https://brauner.io/2023/02/28/mounting-into-mount-namespaces.html [2] Link: https://github.com/flatcar/sysext-bakery Link: https://fedoraproject.org/wiki/Changes/Unified_Kernel_Support_Phase_1 Link: https://fedoraproject.org/wiki/Changes/Unified_Kernel_Support_Phase_2 Link: https://github.com/systemd/systemd/pull/26013 Reviewed-by: Seth Forshee (DigitalOcean) <sforshee@kernel.org> Message-Id: <20230202-fs-move-mount-replace-v4-4-98f3d80d7eaa@kernel.org> Signed-off-by: Christian Brauner <brauner@kernel.org>
2023-05-03 11:18:42 +00:00
attach_mnt(mnt, parent, mp, false);
mnt: Tuck mounts under others instead of creating shadow/side mounts. Ever since mount propagation was introduced in cases where a mount in propagated to parent mount mountpoint pair that is already in use the code has placed the new mount behind the old mount in the mount hash table. This implementation detail is problematic as it allows creating arbitrary length mount hash chains. Furthermore it invalidates the constraint maintained elsewhere in the mount code that a parent mount and a mountpoint pair will have exactly one mount upon them. Making it hard to deal with and to talk about this special case in the mount code. Modify mount propagation to notice when there is already a mount at the parent mount and mountpoint where a new mount is propagating to and place that preexisting mount on top of the new mount. Modify unmount propagation to notice when a mount that is being unmounted has another mount on top of it (and no other children), and to replace the unmounted mount with the mount on top of it. Move the MNT_UMUONT test from __lookup_mnt_last into __propagate_umount as that is the only call of __lookup_mnt_last where MNT_UMOUNT may be set on any mount visible in the mount hash table. These modifications allow: - __lookup_mnt_last to be removed. - attach_shadows to be renamed __attach_mnt and its shadow handling to be removed. - commit_tree to be simplified - copy_tree to be simplified The result is an easier to understand tree of mounts that does not allow creation of arbitrary length hash chains in the mount hash table. The result is also a very slight userspace visible difference in semantics. The following two cases now behave identically, where before order mattered: case 1: (explicit user action) B is a slave of A mount something on A/a , it will propagate to B/a and than mount something on B/a case 2: (tucked mount) B is a slave of A mount something on B/a and than mount something on A/a Histroically umount A/a would fail in case 1 and succeed in case 2. Now umount A/a succeeds in both configurations. This very small change in semantics appears if anything to be a bug fix to me and my survey of userspace leads me to believe that no programs will notice or care of this subtle semantic change. v2: Updated to mnt_change_mountpoint to not call dput or mntput and instead to decrement the counts directly. It is guaranteed that there will be other references when mnt_change_mountpoint is called so this is safe. v3: Moved put_mountpoint under mount_lock in attach_recursive_mnt As the locking in fs/namespace.c changed between v2 and v3. v4: Reworked the logic in propagate_mount_busy and __propagate_umount that detects when a mount completely covers another mount. v5: Removed unnecessary tests whose result is alwasy true in find_topper and attach_recursive_mnt. v6: Document the user space visible semantic difference. Cc: stable@vger.kernel.org Fixes: b90fa9ae8f51 ("[PATCH] shared mount handling: bind and rbind") Tested-by: Andrei Vagin <avagin@virtuozzo.com> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2017-01-20 05:28:35 +00:00
put_mountpoint(old_mp);
mnt_add_count(old_parent, -1);
}
static inline struct mount *node_to_mount(struct rb_node *node)
{
add listmount(2) syscall Add way to query the children of a particular mount. This is a more flexible way to iterate the mount tree than having to parse /proc/self/mountinfo. Lookup the mount by the new 64bit mount ID. If a mount needs to be queried based on path, then statx(2) can be used to first query the mount ID belonging to the path. Return an array of new (64bit) mount ID's. Without privileges only mounts are listed which are reachable from the task's root. Folded into this patch are several later improvements. Keeping them separate would make the history pointlessly confusing: * Recursive listing of mounts is the default now (cf. [1]). * Remove explicit LISTMOUNT_UNREACHABLE flag (cf. [1]) and fail if mount is unreachable from current root. This also makes permission checking consistent with statmount() (cf. [3]). * Start listing mounts in unique mount ID order (cf. [2]) to allow continuing listmount() from a midpoint. * Allow to continue listmount(). The @request_mask parameter is renamed and to @param to be usable by both statmount() and listmount(). If @param is set to a mount id then listmount() will continue listing mounts from that id on. This allows listing mounts in multiple listmount invocations without having to resize the buffer. If @param is zero then the listing starts from the beginning (cf. [4]). * Don't return EOVERFLOW, instead return the buffer size which allows to detect a full buffer as well (cf. [4]). Signed-off-by: Miklos Szeredi <mszeredi@redhat.com> Link: https://lore.kernel.org/r/20231025140205.3586473-6-mszeredi@redhat.com Reviewed-by: Ian Kent <raven@themaw.net> Link: https://lore.kernel.org/r/20231128160337.29094-2-mszeredi@redhat.com [1] (folded) Link: https://lore.kernel.org/r/20231128160337.29094-3-mszeredi@redhat.com [2] (folded) Link: https://lore.kernel.org/r/20231128160337.29094-4-mszeredi@redhat.com [3] (folded) Link: https://lore.kernel.org/r/20231128160337.29094-5-mszeredi@redhat.com [4] (folded) [Christian Brauner <brauner@kernel.org>: various smaller fixes] Signed-off-by: Christian Brauner <brauner@kernel.org>
2023-10-25 14:02:03 +00:00
return node ? rb_entry(node, struct mount, mnt_node) : NULL;
}
static void mnt_add_to_ns(struct mnt_namespace *ns, struct mount *mnt)
{
struct rb_node **link = &ns->mounts.rb_node;
struct rb_node *parent = NULL;
WARN_ON(mnt->mnt.mnt_flags & MNT_ONRB);
mnt->mnt_ns = ns;
while (*link) {
parent = *link;
if (mnt->mnt_id_unique < node_to_mount(parent)->mnt_id_unique)
link = &parent->rb_left;
else
link = &parent->rb_right;
}
rb_link_node(&mnt->mnt_node, parent, link);
rb_insert_color(&mnt->mnt_node, &ns->mounts);
mnt->mnt.mnt_flags |= MNT_ONRB;
}
/*
* vfsmount lock must be held for write
*/
mnt: Tuck mounts under others instead of creating shadow/side mounts. Ever since mount propagation was introduced in cases where a mount in propagated to parent mount mountpoint pair that is already in use the code has placed the new mount behind the old mount in the mount hash table. This implementation detail is problematic as it allows creating arbitrary length mount hash chains. Furthermore it invalidates the constraint maintained elsewhere in the mount code that a parent mount and a mountpoint pair will have exactly one mount upon them. Making it hard to deal with and to talk about this special case in the mount code. Modify mount propagation to notice when there is already a mount at the parent mount and mountpoint where a new mount is propagating to and place that preexisting mount on top of the new mount. Modify unmount propagation to notice when a mount that is being unmounted has another mount on top of it (and no other children), and to replace the unmounted mount with the mount on top of it. Move the MNT_UMUONT test from __lookup_mnt_last into __propagate_umount as that is the only call of __lookup_mnt_last where MNT_UMOUNT may be set on any mount visible in the mount hash table. These modifications allow: - __lookup_mnt_last to be removed. - attach_shadows to be renamed __attach_mnt and its shadow handling to be removed. - commit_tree to be simplified - copy_tree to be simplified The result is an easier to understand tree of mounts that does not allow creation of arbitrary length hash chains in the mount hash table. The result is also a very slight userspace visible difference in semantics. The following two cases now behave identically, where before order mattered: case 1: (explicit user action) B is a slave of A mount something on A/a , it will propagate to B/a and than mount something on B/a case 2: (tucked mount) B is a slave of A mount something on B/a and than mount something on A/a Histroically umount A/a would fail in case 1 and succeed in case 2. Now umount A/a succeeds in both configurations. This very small change in semantics appears if anything to be a bug fix to me and my survey of userspace leads me to believe that no programs will notice or care of this subtle semantic change. v2: Updated to mnt_change_mountpoint to not call dput or mntput and instead to decrement the counts directly. It is guaranteed that there will be other references when mnt_change_mountpoint is called so this is safe. v3: Moved put_mountpoint under mount_lock in attach_recursive_mnt As the locking in fs/namespace.c changed between v2 and v3. v4: Reworked the logic in propagate_mount_busy and __propagate_umount that detects when a mount completely covers another mount. v5: Removed unnecessary tests whose result is alwasy true in find_topper and attach_recursive_mnt. v6: Document the user space visible semantic difference. Cc: stable@vger.kernel.org Fixes: b90fa9ae8f51 ("[PATCH] shared mount handling: bind and rbind") Tested-by: Andrei Vagin <avagin@virtuozzo.com> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2017-01-20 05:28:35 +00:00
static void commit_tree(struct mount *mnt)
{
struct mount *parent = mnt->mnt_parent;
struct mount *m;
LIST_HEAD(head);
struct mnt_namespace *n = parent->mnt_ns;
BUG_ON(parent == mnt);
list_add_tail(&head, &mnt->mnt_list);
while (!list_empty(&head)) {
m = list_first_entry(&head, typeof(*m), mnt_list);
list_del(&m->mnt_list);
mnt_add_to_ns(n, m);
}
n->nr_mounts += n->pending_mounts;
mnt: Add a per mount namespace limit on the number of mounts CAI Qian <caiqian@redhat.com> pointed out that the semantics of shared subtrees make it possible to create an exponentially increasing number of mounts in a mount namespace. mkdir /tmp/1 /tmp/2 mount --make-rshared / for i in $(seq 1 20) ; do mount --bind /tmp/1 /tmp/2 ; done Will create create 2^20 or 1048576 mounts, which is a practical problem as some people have managed to hit this by accident. As such CVE-2016-6213 was assigned. Ian Kent <raven@themaw.net> described the situation for autofs users as follows: > The number of mounts for direct mount maps is usually not very large because of > the way they are implemented, large direct mount maps can have performance > problems. There can be anywhere from a few (likely case a few hundred) to less > than 10000, plus mounts that have been triggered and not yet expired. > > Indirect mounts have one autofs mount at the root plus the number of mounts that > have been triggered and not yet expired. > > The number of autofs indirect map entries can range from a few to the common > case of several thousand and in rare cases up to between 30000 and 50000. I've > not heard of people with maps larger than 50000 entries. > > The larger the number of map entries the greater the possibility for a large > number of active mounts so it's not hard to expect cases of a 1000 or somewhat > more active mounts. So I am setting the default number of mounts allowed per mount namespace at 100,000. This is more than enough for any use case I know of, but small enough to quickly stop an exponential increase in mounts. Which should be perfect to catch misconfigurations and malfunctioning programs. For anyone who needs a higher limit this can be changed by writing to the new /proc/sys/fs/mount-max sysctl. Tested-by: CAI Qian <caiqian@redhat.com> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2016-09-28 05:27:17 +00:00
n->pending_mounts = 0;
mnt: Tuck mounts under others instead of creating shadow/side mounts. Ever since mount propagation was introduced in cases where a mount in propagated to parent mount mountpoint pair that is already in use the code has placed the new mount behind the old mount in the mount hash table. This implementation detail is problematic as it allows creating arbitrary length mount hash chains. Furthermore it invalidates the constraint maintained elsewhere in the mount code that a parent mount and a mountpoint pair will have exactly one mount upon them. Making it hard to deal with and to talk about this special case in the mount code. Modify mount propagation to notice when there is already a mount at the parent mount and mountpoint where a new mount is propagating to and place that preexisting mount on top of the new mount. Modify unmount propagation to notice when a mount that is being unmounted has another mount on top of it (and no other children), and to replace the unmounted mount with the mount on top of it. Move the MNT_UMUONT test from __lookup_mnt_last into __propagate_umount as that is the only call of __lookup_mnt_last where MNT_UMOUNT may be set on any mount visible in the mount hash table. These modifications allow: - __lookup_mnt_last to be removed. - attach_shadows to be renamed __attach_mnt and its shadow handling to be removed. - commit_tree to be simplified - copy_tree to be simplified The result is an easier to understand tree of mounts that does not allow creation of arbitrary length hash chains in the mount hash table. The result is also a very slight userspace visible difference in semantics. The following two cases now behave identically, where before order mattered: case 1: (explicit user action) B is a slave of A mount something on A/a , it will propagate to B/a and than mount something on B/a case 2: (tucked mount) B is a slave of A mount something on B/a and than mount something on A/a Histroically umount A/a would fail in case 1 and succeed in case 2. Now umount A/a succeeds in both configurations. This very small change in semantics appears if anything to be a bug fix to me and my survey of userspace leads me to believe that no programs will notice or care of this subtle semantic change. v2: Updated to mnt_change_mountpoint to not call dput or mntput and instead to decrement the counts directly. It is guaranteed that there will be other references when mnt_change_mountpoint is called so this is safe. v3: Moved put_mountpoint under mount_lock in attach_recursive_mnt As the locking in fs/namespace.c changed between v2 and v3. v4: Reworked the logic in propagate_mount_busy and __propagate_umount that detects when a mount completely covers another mount. v5: Removed unnecessary tests whose result is alwasy true in find_topper and attach_recursive_mnt. v6: Document the user space visible semantic difference. Cc: stable@vger.kernel.org Fixes: b90fa9ae8f51 ("[PATCH] shared mount handling: bind and rbind") Tested-by: Andrei Vagin <avagin@virtuozzo.com> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2017-01-20 05:28:35 +00:00
__attach_mnt(mnt, parent);
touch_mnt_namespace(n);
}
static struct mount *next_mnt(struct mount *p, struct mount *root)
{
struct list_head *next = p->mnt_mounts.next;
if (next == &p->mnt_mounts) {
while (1) {
if (p == root)
return NULL;
next = p->mnt_child.next;
if (next != &p->mnt_parent->mnt_mounts)
break;
p = p->mnt_parent;
}
}
return list_entry(next, struct mount, mnt_child);
}
static struct mount *skip_mnt_tree(struct mount *p)
{
struct list_head *prev = p->mnt_mounts.prev;
while (prev != &p->mnt_mounts) {
p = list_entry(prev, struct mount, mnt_child);
prev = p->mnt_mounts.prev;
}
return p;
}
/**
* vfs_create_mount - Create a mount for a configured superblock
* @fc: The configuration context with the superblock attached
*
* Create a mount to an already configured superblock. If necessary, the
* caller should invoke vfs_get_tree() before calling this.
*
* Note that this does not attach the mount to anything.
*/
struct vfsmount *vfs_create_mount(struct fs_context *fc)
{
struct mount *mnt;
if (!fc->root)
return ERR_PTR(-EINVAL);
mnt = alloc_vfsmnt(fc->source ?: "none");
if (!mnt)
return ERR_PTR(-ENOMEM);
if (fc->sb_flags & SB_KERNMOUNT)
mnt->mnt.mnt_flags = MNT_INTERNAL;
atomic_inc(&fc->root->d_sb->s_active);
mnt->mnt.mnt_sb = fc->root->d_sb;
mnt->mnt.mnt_root = dget(fc->root);
mnt->mnt_mountpoint = mnt->mnt.mnt_root;
mnt->mnt_parent = mnt;
lock_mount_hash();
list_add_tail(&mnt->mnt_instance, &mnt->mnt.mnt_sb->s_mounts);
unlock_mount_hash();
return &mnt->mnt;
}
EXPORT_SYMBOL(vfs_create_mount);
struct vfsmount *fc_mount(struct fs_context *fc)
{
int err = vfs_get_tree(fc);
if (!err) {
up_write(&fc->root->d_sb->s_umount);
return vfs_create_mount(fc);
}
return ERR_PTR(err);
}
EXPORT_SYMBOL(fc_mount);
struct vfsmount *vfs_kern_mount(struct file_system_type *type,
int flags, const char *name,
void *data)
{
struct fs_context *fc;
struct vfsmount *mnt;
int ret = 0;
if (!type)
vfs: Implement a filesystem superblock creation/configuration context [AV - unfuck kern_mount_data(); we want non-NULL ->mnt_ns on long-living mounts] [AV - reordering fs/namespace.c is badly overdue, but let's keep it separate from that series] [AV - drop simple_pin_fs() change] [AV - clean vfs_kern_mount() failure exits up] Implement a filesystem context concept to be used during superblock creation for mount and superblock reconfiguration for remount. The mounting procedure then becomes: (1) Allocate new fs_context context. (2) Configure the context. (3) Create superblock. (4) Query the superblock. (5) Create a mount for the superblock. (6) Destroy the context. Rather than calling fs_type->mount(), an fs_context struct is created and fs_type->init_fs_context() is called to set it up. Pointers exist for the filesystem and LSM to hang their private data off. A set of operations has to be set by ->init_fs_context() to provide freeing, duplication, option parsing, binary data parsing, validation, mounting and superblock filling. Legacy filesystems are supported by the provision of a set of legacy fs_context operations that build up a list of mount options and then invoke fs_type->mount() from within the fs_context ->get_tree() operation. This allows all filesystems to be accessed using fs_context. It should be noted that, whilst this patch adds a lot of lines of code, there is quite a bit of duplication with existing code that can be eliminated should all filesystems be converted over. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2018-11-01 23:07:25 +00:00
return ERR_PTR(-EINVAL);
fc = fs_context_for_mount(type, flags);
if (IS_ERR(fc))
return ERR_CAST(fc);
vfs: Implement a filesystem superblock creation/configuration context [AV - unfuck kern_mount_data(); we want non-NULL ->mnt_ns on long-living mounts] [AV - reordering fs/namespace.c is badly overdue, but let's keep it separate from that series] [AV - drop simple_pin_fs() change] [AV - clean vfs_kern_mount() failure exits up] Implement a filesystem context concept to be used during superblock creation for mount and superblock reconfiguration for remount. The mounting procedure then becomes: (1) Allocate new fs_context context. (2) Configure the context. (3) Create superblock. (4) Query the superblock. (5) Create a mount for the superblock. (6) Destroy the context. Rather than calling fs_type->mount(), an fs_context struct is created and fs_type->init_fs_context() is called to set it up. Pointers exist for the filesystem and LSM to hang their private data off. A set of operations has to be set by ->init_fs_context() to provide freeing, duplication, option parsing, binary data parsing, validation, mounting and superblock filling. Legacy filesystems are supported by the provision of a set of legacy fs_context operations that build up a list of mount options and then invoke fs_type->mount() from within the fs_context ->get_tree() operation. This allows all filesystems to be accessed using fs_context. It should be noted that, whilst this patch adds a lot of lines of code, there is quite a bit of duplication with existing code that can be eliminated should all filesystems be converted over. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2018-11-01 23:07:25 +00:00
if (name)
ret = vfs_parse_fs_string(fc, "source",
name, strlen(name));
if (!ret)
ret = parse_monolithic_mount_data(fc, data);
if (!ret)
mnt = fc_mount(fc);
else
mnt = ERR_PTR(ret);
put_fs_context(fc);
return mnt;
}
EXPORT_SYMBOL_GPL(vfs_kern_mount);
fs: Better permission checking for submounts To support unprivileged users mounting filesystems two permission checks have to be performed: a test to see if the user allowed to create a mount in the mount namespace, and a test to see if the user is allowed to access the specified filesystem. The automount case is special in that mounting the original filesystem grants permission to mount the sub-filesystems, to any user who happens to stumble across the their mountpoint and satisfies the ordinary filesystem permission checks. Attempting to handle the automount case by using override_creds almost works. It preserves the idea that permission to mount the original filesystem is permission to mount the sub-filesystem. Unfortunately using override_creds messes up the filesystems ordinary permission checks. Solve this by being explicit that a mount is a submount by introducing vfs_submount, and using it where appropriate. vfs_submount uses a new mount internal mount flags MS_SUBMOUNT, to let sget and friends know that a mount is a submount so they can take appropriate action. sget and sget_userns are modified to not perform any permission checks on submounts. follow_automount is modified to stop using override_creds as that has proven problemantic. do_mount is modified to always remove the new MS_SUBMOUNT flag so that we know userspace will never by able to specify it. autofs4 is modified to stop using current_real_cred that was put in there to handle the previous version of submount permission checking. cifs is modified to pass the mountpoint all of the way down to vfs_submount. debugfs is modified to pass the mountpoint all of the way down to trace_automount by adding a new parameter. To make this change easier a new typedef debugfs_automount_t is introduced to capture the type of the debugfs automount function. Cc: stable@vger.kernel.org Fixes: 069d5ac9ae0d ("autofs: Fix automounts by using current_real_cred()->uid") Fixes: aeaa4a79ff6a ("fs: Call d_automount with the filesystems creds") Reviewed-by: Trond Myklebust <trond.myklebust@primarydata.com> Reviewed-by: Seth Forshee <seth.forshee@canonical.com> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2017-01-31 17:06:16 +00:00
struct vfsmount *
vfs_submount(const struct dentry *mountpoint, struct file_system_type *type,
const char *name, void *data)
{
/* Until it is worked out how to pass the user namespace
* through from the parent mount to the submount don't support
* unprivileged mounts with submounts.
*/
if (mountpoint->d_sb->s_user_ns != &init_user_ns)
return ERR_PTR(-EPERM);
return vfs_kern_mount(type, SB_SUBMOUNT, name, data);
fs: Better permission checking for submounts To support unprivileged users mounting filesystems two permission checks have to be performed: a test to see if the user allowed to create a mount in the mount namespace, and a test to see if the user is allowed to access the specified filesystem. The automount case is special in that mounting the original filesystem grants permission to mount the sub-filesystems, to any user who happens to stumble across the their mountpoint and satisfies the ordinary filesystem permission checks. Attempting to handle the automount case by using override_creds almost works. It preserves the idea that permission to mount the original filesystem is permission to mount the sub-filesystem. Unfortunately using override_creds messes up the filesystems ordinary permission checks. Solve this by being explicit that a mount is a submount by introducing vfs_submount, and using it where appropriate. vfs_submount uses a new mount internal mount flags MS_SUBMOUNT, to let sget and friends know that a mount is a submount so they can take appropriate action. sget and sget_userns are modified to not perform any permission checks on submounts. follow_automount is modified to stop using override_creds as that has proven problemantic. do_mount is modified to always remove the new MS_SUBMOUNT flag so that we know userspace will never by able to specify it. autofs4 is modified to stop using current_real_cred that was put in there to handle the previous version of submount permission checking. cifs is modified to pass the mountpoint all of the way down to vfs_submount. debugfs is modified to pass the mountpoint all of the way down to trace_automount by adding a new parameter. To make this change easier a new typedef debugfs_automount_t is introduced to capture the type of the debugfs automount function. Cc: stable@vger.kernel.org Fixes: 069d5ac9ae0d ("autofs: Fix automounts by using current_real_cred()->uid") Fixes: aeaa4a79ff6a ("fs: Call d_automount with the filesystems creds") Reviewed-by: Trond Myklebust <trond.myklebust@primarydata.com> Reviewed-by: Seth Forshee <seth.forshee@canonical.com> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2017-01-31 17:06:16 +00:00
}
EXPORT_SYMBOL_GPL(vfs_submount);
static struct mount *clone_mnt(struct mount *old, struct dentry *root,
int flag)
{
struct super_block *sb = old->mnt.mnt_sb;
struct mount *mnt;
int err;
mnt = alloc_vfsmnt(old->mnt_devname);
if (!mnt)
return ERR_PTR(-ENOMEM);
if (flag & (CL_SLAVE | CL_PRIVATE | CL_SHARED_TO_SLAVE))
mnt->mnt_group_id = 0; /* not a peer of original */
else
mnt->mnt_group_id = old->mnt_group_id;
if ((flag & CL_MAKE_SHARED) && !mnt->mnt_group_id) {
err = mnt_alloc_group_id(mnt);
if (err)
goto out_free;
}
mnt->mnt.mnt_flags = old->mnt.mnt_flags;
mnt->mnt.mnt_flags &= ~(MNT_WRITE_HOLD|MNT_MARKED|MNT_INTERNAL|MNT_ONRB);
atomic_inc(&sb->s_active);
fs: introduce dedicated idmap type for mounts Last cycle we've already made the interaction with idmapped mounts more robust and type safe by introducing the vfs{g,u}id_t type. This cycle we concluded the conversion and removed the legacy helpers. Currently we still pass around the plain namespace that was attached to a mount. This is in general pretty convenient but it makes it easy to conflate filesystem and mount namespaces and what different roles they have to play. Especially for filesystem developers without much experience in this area this is an easy source for bugs. Instead of passing the plain namespace we introduce a dedicated type struct mnt_idmap and replace the pointer with a pointer to a struct mnt_idmap. There are no semantic or size changes for the mount struct caused by this. We then start converting all places aware of idmapped mounts to rely on struct mnt_idmap. Once the conversion is done all helpers down to the really low-level make_vfs{g,u}id() and from_vfs{g,u}id() will take a struct mnt_idmap argument instead of two namespace arguments. This way it becomes impossible to conflate the two, removing and thus eliminating the possibility of any bugs. Fwiw, I fixed some issues in that area a while ago in ntfs3 and ksmbd in the past. Afterwards, only low-level code can ultimately use the associated namespace for any permission checks. Even most of the vfs can be ultimately completely oblivious about this and filesystems will never interact with it directly in any form in the future. A struct mnt_idmap currently encompasses a simple refcount and a pointer to the relevant namespace the mount is idmapped to. If a mount isn't idmapped then it will point to a static nop_mnt_idmap. If it is an idmapped mount it will point to a new struct mnt_idmap. As usual there are no allocations or anything happening for non-idmapped mounts. Everthing is carefully written to be a nop for non-idmapped mounts as has always been the case. If an idmapped mount or mount tree is created a new struct mnt_idmap is allocated and a reference taken on the relevant namespace. For each mount in a mount tree that gets idmapped or a mount that inherits the idmap when it is cloned the reference count on the associated struct mnt_idmap is bumped. Just a reminder that we only allow a mount to change it's idmapping a single time and only if it hasn't already been attached to the filesystems and has no active writers. The actual changes are fairly straightforward. This will have huge benefits for maintenance and security in the long run even if it causes some churn. I'm aware that there's some cost for all of you. And I'll commit to doing this work and make this as painless as I can. Note that this also makes it possible to extend struct mount_idmap in the future. For example, it would be possible to place the namespace pointer in an anonymous union together with an idmapping struct. This would allow us to expose an api to userspace that would let it specify idmappings directly instead of having to go through the detour of setting up namespaces at all. This just adds the infrastructure and doesn't do any conversions. Reviewed-by: Seth Forshee (DigitalOcean) <sforshee@kernel.org> Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
2022-10-26 10:51:27 +00:00
mnt->mnt.mnt_idmap = mnt_idmap_get(mnt_idmap(&old->mnt));
mnt->mnt.mnt_sb = sb;
mnt->mnt.mnt_root = dget(root);
mnt->mnt_mountpoint = mnt->mnt.mnt_root;
mnt->mnt_parent = mnt;
lock_mount_hash();
list_add_tail(&mnt->mnt_instance, &sb->s_mounts);
unlock_mount_hash();
if ((flag & CL_SLAVE) ||
((flag & CL_SHARED_TO_SLAVE) && IS_MNT_SHARED(old))) {
list_add(&mnt->mnt_slave, &old->mnt_slave_list);
mnt->mnt_master = old;
CLEAR_MNT_SHARED(mnt);
} else if (!(flag & CL_PRIVATE)) {
if ((flag & CL_MAKE_SHARED) || IS_MNT_SHARED(old))
list_add(&mnt->mnt_share, &old->mnt_share);
if (IS_MNT_SLAVE(old))
list_add(&mnt->mnt_slave, &old->mnt_slave);
mnt->mnt_master = old->mnt_master;
} else {
CLEAR_MNT_SHARED(mnt);
}
if (flag & CL_MAKE_SHARED)
set_mnt_shared(mnt);
/* stick the duplicate mount on the same expiry list
* as the original if that was on one */
if (flag & CL_EXPIRE) {
if (!list_empty(&old->mnt_expire))
list_add(&mnt->mnt_expire, &old->mnt_expire);
}
return mnt;
out_free:
mnt_free_id(mnt);
free_vfsmnt(mnt);
return ERR_PTR(err);
}
static void cleanup_mnt(struct mount *mnt)
{
struct hlist_node *p;
struct mount *m;
/*
* The warning here probably indicates that somebody messed
* up a mnt_want/drop_write() pair. If this happens, the
* filesystem was probably unable to make r/w->r/o transitions.
* The locking used to deal with mnt_count decrement provides barriers,
* so mnt_get_writers() below is safe.
*/
WARN_ON(mnt_get_writers(mnt));
if (unlikely(mnt->mnt_pins.first))
mnt_pin_kill(mnt);
hlist_for_each_entry_safe(m, p, &mnt->mnt_stuck_children, mnt_umount) {
hlist_del(&m->mnt_umount);
mntput(&m->mnt);
}
fsnotify_vfsmount_delete(&mnt->mnt);
dput(mnt->mnt.mnt_root);
deactivate_super(mnt->mnt.mnt_sb);
mnt_free_id(mnt);
call_rcu(&mnt->mnt_rcu, delayed_free_vfsmnt);
}
static void __cleanup_mnt(struct rcu_head *head)
{
cleanup_mnt(container_of(head, struct mount, mnt_rcu));
}
static LLIST_HEAD(delayed_mntput_list);
static void delayed_mntput(struct work_struct *unused)
{
struct llist_node *node = llist_del_all(&delayed_mntput_list);
struct mount *m, *t;
llist_for_each_entry_safe(m, t, node, mnt_llist)
cleanup_mnt(m);
}
static DECLARE_DELAYED_WORK(delayed_mntput_work, delayed_mntput);
static void mntput_no_expire(struct mount *mnt)
fs: scale mntget/mntput The problem that this patch aims to fix is vfsmount refcounting scalability. We need to take a reference on the vfsmount for every successful path lookup, which often go to the same mount point. The fundamental difficulty is that a "simple" reference count can never be made scalable, because any time a reference is dropped, we must check whether that was the last reference. To do that requires communication with all other CPUs that may have taken a reference count. We can make refcounts more scalable in a couple of ways, involving keeping distributed counters, and checking for the global-zero condition less frequently. - check the global sum once every interval (this will delay zero detection for some interval, so it's probably a showstopper for vfsmounts). - keep a local count and only taking the global sum when local reaches 0 (this is difficult for vfsmounts, because we can't hold preempt off for the life of a reference, so a counter would need to be per-thread or tied strongly to a particular CPU which requires more locking). - keep a local difference of increments and decrements, which allows us to sum the total difference and hence find the refcount when summing all CPUs. Then, keep a single integer "long" refcount for slow and long lasting references, and only take the global sum of local counters when the long refcount is 0. This last scheme is what I implemented here. Attached mounts and process root and working directory references are "long" references, and everything else is a short reference. This allows scalable vfsmount references during path walking over mounted subtrees and unattached (lazy umounted) mounts with processes still running in them. This results in one fewer atomic op in the fastpath: mntget is now just a per-CPU inc, rather than an atomic inc; and mntput just requires a spinlock and non-atomic decrement in the common case. However code is otherwise bigger and heavier, so single threaded performance is basically a wash. Signed-off-by: Nick Piggin <npiggin@kernel.dk>
2011-01-07 06:50:11 +00:00
{
LIST_HEAD(list);
int count;
RCU'd vfsmounts * RCU-delayed freeing of vfsmounts * vfsmount_lock replaced with a seqlock (mount_lock) * sequence number from mount_lock is stored in nameidata->m_seq and used when we exit RCU mode * new vfsmount flag - MNT_SYNC_UMOUNT. Set by umount_tree() when its caller knows that vfsmount will have no surviving references. * synchronize_rcu() done between unlocking namespace_sem in namespace_unlock() and doing pending mntput(). * new helper: legitimize_mnt(mnt, seq). Checks the mount_lock sequence number against seq, then grabs reference to mnt. Then it rechecks mount_lock again to close the race and either returns success or drops the reference it has acquired. The subtle point is that in case of MNT_SYNC_UMOUNT we can simply decrement the refcount and sod off - aforementioned synchronize_rcu() makes sure that final mntput() won't come until we leave RCU mode. We need that, since we don't want to end up with some lazy pathwalk racing with umount() and stealing the final mntput() from it - caller of umount() may expect it to return only once the fs is shut down and we don't want to break that. In other cases (i.e. with MNT_SYNC_UMOUNT absent) we have to do full-blown mntput() in case of mount_lock sequence number mismatch happening just as we'd grabbed the reference, but in those cases we won't be stealing the final mntput() from anything that would care. * mntput_no_expire() doesn't lock anything on the fast path now. Incidentally, SMP and UP cases are handled the same way - no ifdefs there. * normal pathname resolution does *not* do any writes to mount_lock. It does, of course, bump the refcounts of vfsmount and dentry in the very end, but that's it. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-09-30 02:06:07 +00:00
rcu_read_lock();
fix mntput/mntput race mntput_no_expire() does the calculation of total refcount under mount_lock; unfortunately, the decrement (as well as all increments) are done outside of it, leading to false positives in the "are we dropping the last reference" test. Consider the following situation: * mnt is a lazy-umounted mount, kept alive by two opened files. One of those files gets closed. Total refcount of mnt is 2. On CPU 42 mntput(mnt) (called from __fput()) drops one reference, decrementing component * After it has looked at component #0, the process on CPU 0 does mntget(), incrementing component #0, gets preempted and gets to run again - on CPU 69. There it does mntput(), which drops the reference (component #69) and proceeds to spin on mount_lock. * On CPU 42 our first mntput() finishes counting. It observes the decrement of component #69, but not the increment of component #0. As the result, the total it gets is not 1 as it should've been - it's 0. At which point we decide that vfsmount needs to be killed and proceed to free it and shut the filesystem down. However, there's still another opened file on that filesystem, with reference to (now freed) vfsmount, etc. and we are screwed. It's not a wide race, but it can be reproduced with artificial slowdown of the mnt_get_count() loop, and it should be easier to hit on SMP KVM setups. Fix consists of moving the refcount decrement under mount_lock; the tricky part is that we want (and can) keep the fast case (i.e. mount that still has non-NULL ->mnt_ns) entirely out of mount_lock. All places that zero mnt->mnt_ns are dropping some reference to mnt and they call synchronize_rcu() before that mntput(). IOW, if mntput() observes (under rcu_read_lock()) a non-NULL ->mnt_ns, it is guaranteed that there is another reference yet to be dropped. Reported-by: Jann Horn <jannh@google.com> Tested-by: Jann Horn <jannh@google.com> Fixes: 48a066e72d97 ("RCU'd vsfmounts") Cc: stable@vger.kernel.org Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2018-08-09 21:21:17 +00:00
if (likely(READ_ONCE(mnt->mnt_ns))) {
/*
* Since we don't do lock_mount_hash() here,
* ->mnt_ns can change under us. However, if it's
* non-NULL, then there's a reference that won't
* be dropped until after an RCU delay done after
* turning ->mnt_ns NULL. So if we observe it
* non-NULL under rcu_read_lock(), the reference
* we are dropping is not the final one.
*/
mnt_add_count(mnt, -1);
RCU'd vfsmounts * RCU-delayed freeing of vfsmounts * vfsmount_lock replaced with a seqlock (mount_lock) * sequence number from mount_lock is stored in nameidata->m_seq and used when we exit RCU mode * new vfsmount flag - MNT_SYNC_UMOUNT. Set by umount_tree() when its caller knows that vfsmount will have no surviving references. * synchronize_rcu() done between unlocking namespace_sem in namespace_unlock() and doing pending mntput(). * new helper: legitimize_mnt(mnt, seq). Checks the mount_lock sequence number against seq, then grabs reference to mnt. Then it rechecks mount_lock again to close the race and either returns success or drops the reference it has acquired. The subtle point is that in case of MNT_SYNC_UMOUNT we can simply decrement the refcount and sod off - aforementioned synchronize_rcu() makes sure that final mntput() won't come until we leave RCU mode. We need that, since we don't want to end up with some lazy pathwalk racing with umount() and stealing the final mntput() from it - caller of umount() may expect it to return only once the fs is shut down and we don't want to break that. In other cases (i.e. with MNT_SYNC_UMOUNT absent) we have to do full-blown mntput() in case of mount_lock sequence number mismatch happening just as we'd grabbed the reference, but in those cases we won't be stealing the final mntput() from anything that would care. * mntput_no_expire() doesn't lock anything on the fast path now. Incidentally, SMP and UP cases are handled the same way - no ifdefs there. * normal pathname resolution does *not* do any writes to mount_lock. It does, of course, bump the refcounts of vfsmount and dentry in the very end, but that's it. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-09-30 02:06:07 +00:00
rcu_read_unlock();
return;
fs: scale mntget/mntput The problem that this patch aims to fix is vfsmount refcounting scalability. We need to take a reference on the vfsmount for every successful path lookup, which often go to the same mount point. The fundamental difficulty is that a "simple" reference count can never be made scalable, because any time a reference is dropped, we must check whether that was the last reference. To do that requires communication with all other CPUs that may have taken a reference count. We can make refcounts more scalable in a couple of ways, involving keeping distributed counters, and checking for the global-zero condition less frequently. - check the global sum once every interval (this will delay zero detection for some interval, so it's probably a showstopper for vfsmounts). - keep a local count and only taking the global sum when local reaches 0 (this is difficult for vfsmounts, because we can't hold preempt off for the life of a reference, so a counter would need to be per-thread or tied strongly to a particular CPU which requires more locking). - keep a local difference of increments and decrements, which allows us to sum the total difference and hence find the refcount when summing all CPUs. Then, keep a single integer "long" refcount for slow and long lasting references, and only take the global sum of local counters when the long refcount is 0. This last scheme is what I implemented here. Attached mounts and process root and working directory references are "long" references, and everything else is a short reference. This allows scalable vfsmount references during path walking over mounted subtrees and unattached (lazy umounted) mounts with processes still running in them. This results in one fewer atomic op in the fastpath: mntget is now just a per-CPU inc, rather than an atomic inc; and mntput just requires a spinlock and non-atomic decrement in the common case. However code is otherwise bigger and heavier, so single threaded performance is basically a wash. Signed-off-by: Nick Piggin <npiggin@kernel.dk>
2011-01-07 06:50:11 +00:00
}
lock_mount_hash();
fix __legitimize_mnt()/mntput() race __legitimize_mnt() has two problems - one is that in case of success the check of mount_lock is not ordered wrt preceding increment of refcount, making it possible to have successful __legitimize_mnt() on one CPU just before the otherwise final mntpu() on another, with __legitimize_mnt() not seeing mntput() taking the lock and mntput() not seeing the increment done by __legitimize_mnt(). Solved by a pair of barriers. Another is that failure of __legitimize_mnt() on the second read_seqretry() leaves us with reference that'll need to be dropped by caller; however, if that races with final mntput() we can end up with caller dropping rcu_read_lock() and doing mntput() to release that reference - with the first mntput() having freed the damn thing just as rcu_read_lock() had been dropped. Solution: in "do mntput() yourself" failure case grab mount_lock, check if MNT_DOOMED has been set by racing final mntput() that has missed our increment and if it has - undo the increment and treat that as "failure, caller doesn't need to drop anything" case. It's not easy to hit - the final mntput() has to come right after the first read_seqretry() in __legitimize_mnt() *and* manage to miss the increment done by __legitimize_mnt() before the second read_seqretry() in there. The things that are almost impossible to hit on bare hardware are not impossible on SMP KVM, though... Reported-by: Oleg Nesterov <oleg@redhat.com> Fixes: 48a066e72d97 ("RCU'd vsfmounts") Cc: stable@vger.kernel.org Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2018-08-09 21:51:32 +00:00
/*
* make sure that if __legitimize_mnt() has not seen us grab
* mount_lock, we'll see their refcount increment here.
*/
smp_mb();
fix mntput/mntput race mntput_no_expire() does the calculation of total refcount under mount_lock; unfortunately, the decrement (as well as all increments) are done outside of it, leading to false positives in the "are we dropping the last reference" test. Consider the following situation: * mnt is a lazy-umounted mount, kept alive by two opened files. One of those files gets closed. Total refcount of mnt is 2. On CPU 42 mntput(mnt) (called from __fput()) drops one reference, decrementing component * After it has looked at component #0, the process on CPU 0 does mntget(), incrementing component #0, gets preempted and gets to run again - on CPU 69. There it does mntput(), which drops the reference (component #69) and proceeds to spin on mount_lock. * On CPU 42 our first mntput() finishes counting. It observes the decrement of component #69, but not the increment of component #0. As the result, the total it gets is not 1 as it should've been - it's 0. At which point we decide that vfsmount needs to be killed and proceed to free it and shut the filesystem down. However, there's still another opened file on that filesystem, with reference to (now freed) vfsmount, etc. and we are screwed. It's not a wide race, but it can be reproduced with artificial slowdown of the mnt_get_count() loop, and it should be easier to hit on SMP KVM setups. Fix consists of moving the refcount decrement under mount_lock; the tricky part is that we want (and can) keep the fast case (i.e. mount that still has non-NULL ->mnt_ns) entirely out of mount_lock. All places that zero mnt->mnt_ns are dropping some reference to mnt and they call synchronize_rcu() before that mntput(). IOW, if mntput() observes (under rcu_read_lock()) a non-NULL ->mnt_ns, it is guaranteed that there is another reference yet to be dropped. Reported-by: Jann Horn <jannh@google.com> Tested-by: Jann Horn <jannh@google.com> Fixes: 48a066e72d97 ("RCU'd vsfmounts") Cc: stable@vger.kernel.org Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2018-08-09 21:21:17 +00:00
mnt_add_count(mnt, -1);
count = mnt_get_count(mnt);
if (count != 0) {
WARN_ON(count < 0);
RCU'd vfsmounts * RCU-delayed freeing of vfsmounts * vfsmount_lock replaced with a seqlock (mount_lock) * sequence number from mount_lock is stored in nameidata->m_seq and used when we exit RCU mode * new vfsmount flag - MNT_SYNC_UMOUNT. Set by umount_tree() when its caller knows that vfsmount will have no surviving references. * synchronize_rcu() done between unlocking namespace_sem in namespace_unlock() and doing pending mntput(). * new helper: legitimize_mnt(mnt, seq). Checks the mount_lock sequence number against seq, then grabs reference to mnt. Then it rechecks mount_lock again to close the race and either returns success or drops the reference it has acquired. The subtle point is that in case of MNT_SYNC_UMOUNT we can simply decrement the refcount and sod off - aforementioned synchronize_rcu() makes sure that final mntput() won't come until we leave RCU mode. We need that, since we don't want to end up with some lazy pathwalk racing with umount() and stealing the final mntput() from it - caller of umount() may expect it to return only once the fs is shut down and we don't want to break that. In other cases (i.e. with MNT_SYNC_UMOUNT absent) we have to do full-blown mntput() in case of mount_lock sequence number mismatch happening just as we'd grabbed the reference, but in those cases we won't be stealing the final mntput() from anything that would care. * mntput_no_expire() doesn't lock anything on the fast path now. Incidentally, SMP and UP cases are handled the same way - no ifdefs there. * normal pathname resolution does *not* do any writes to mount_lock. It does, of course, bump the refcounts of vfsmount and dentry in the very end, but that's it. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-09-30 02:06:07 +00:00
rcu_read_unlock();
unlock_mount_hash();
return;
}
RCU'd vfsmounts * RCU-delayed freeing of vfsmounts * vfsmount_lock replaced with a seqlock (mount_lock) * sequence number from mount_lock is stored in nameidata->m_seq and used when we exit RCU mode * new vfsmount flag - MNT_SYNC_UMOUNT. Set by umount_tree() when its caller knows that vfsmount will have no surviving references. * synchronize_rcu() done between unlocking namespace_sem in namespace_unlock() and doing pending mntput(). * new helper: legitimize_mnt(mnt, seq). Checks the mount_lock sequence number against seq, then grabs reference to mnt. Then it rechecks mount_lock again to close the race and either returns success or drops the reference it has acquired. The subtle point is that in case of MNT_SYNC_UMOUNT we can simply decrement the refcount and sod off - aforementioned synchronize_rcu() makes sure that final mntput() won't come until we leave RCU mode. We need that, since we don't want to end up with some lazy pathwalk racing with umount() and stealing the final mntput() from it - caller of umount() may expect it to return only once the fs is shut down and we don't want to break that. In other cases (i.e. with MNT_SYNC_UMOUNT absent) we have to do full-blown mntput() in case of mount_lock sequence number mismatch happening just as we'd grabbed the reference, but in those cases we won't be stealing the final mntput() from anything that would care. * mntput_no_expire() doesn't lock anything on the fast path now. Incidentally, SMP and UP cases are handled the same way - no ifdefs there. * normal pathname resolution does *not* do any writes to mount_lock. It does, of course, bump the refcounts of vfsmount and dentry in the very end, but that's it. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-09-30 02:06:07 +00:00
if (unlikely(mnt->mnt.mnt_flags & MNT_DOOMED)) {
rcu_read_unlock();
unlock_mount_hash();
return;
}
mnt->mnt.mnt_flags |= MNT_DOOMED;
rcu_read_unlock();
list_del(&mnt->mnt_instance);
if (unlikely(!list_empty(&mnt->mnt_mounts))) {
struct mount *p, *tmp;
list_for_each_entry_safe(p, tmp, &mnt->mnt_mounts, mnt_child) {
__put_mountpoint(unhash_mnt(p), &list);
hlist_add_head(&p->mnt_umount, &mnt->mnt_stuck_children);
}
}
unlock_mount_hash();
shrink_dentry_list(&list);
if (likely(!(mnt->mnt.mnt_flags & MNT_INTERNAL))) {
struct task_struct *task = current;
if (likely(!(task->flags & PF_KTHREAD))) {
init_task_work(&mnt->mnt_rcu, __cleanup_mnt);
if (!task_work_add(task, &mnt->mnt_rcu, TWA_RESUME))
return;
}
if (llist_add(&mnt->mnt_llist, &delayed_mntput_list))
schedule_delayed_work(&delayed_mntput_work, 1);
return;
}
cleanup_mnt(mnt);
fs: scale mntget/mntput The problem that this patch aims to fix is vfsmount refcounting scalability. We need to take a reference on the vfsmount for every successful path lookup, which often go to the same mount point. The fundamental difficulty is that a "simple" reference count can never be made scalable, because any time a reference is dropped, we must check whether that was the last reference. To do that requires communication with all other CPUs that may have taken a reference count. We can make refcounts more scalable in a couple of ways, involving keeping distributed counters, and checking for the global-zero condition less frequently. - check the global sum once every interval (this will delay zero detection for some interval, so it's probably a showstopper for vfsmounts). - keep a local count and only taking the global sum when local reaches 0 (this is difficult for vfsmounts, because we can't hold preempt off for the life of a reference, so a counter would need to be per-thread or tied strongly to a particular CPU which requires more locking). - keep a local difference of increments and decrements, which allows us to sum the total difference and hence find the refcount when summing all CPUs. Then, keep a single integer "long" refcount for slow and long lasting references, and only take the global sum of local counters when the long refcount is 0. This last scheme is what I implemented here. Attached mounts and process root and working directory references are "long" references, and everything else is a short reference. This allows scalable vfsmount references during path walking over mounted subtrees and unattached (lazy umounted) mounts with processes still running in them. This results in one fewer atomic op in the fastpath: mntget is now just a per-CPU inc, rather than an atomic inc; and mntput just requires a spinlock and non-atomic decrement in the common case. However code is otherwise bigger and heavier, so single threaded performance is basically a wash. Signed-off-by: Nick Piggin <npiggin@kernel.dk>
2011-01-07 06:50:11 +00:00
}
void mntput(struct vfsmount *mnt)
{
if (mnt) {
struct mount *m = real_mount(mnt);
/* avoid cacheline pingpong */
if (unlikely(m->mnt_expiry_mark))
WRITE_ONCE(m->mnt_expiry_mark, 0);
mntput_no_expire(m);
fs: scale mntget/mntput The problem that this patch aims to fix is vfsmount refcounting scalability. We need to take a reference on the vfsmount for every successful path lookup, which often go to the same mount point. The fundamental difficulty is that a "simple" reference count can never be made scalable, because any time a reference is dropped, we must check whether that was the last reference. To do that requires communication with all other CPUs that may have taken a reference count. We can make refcounts more scalable in a couple of ways, involving keeping distributed counters, and checking for the global-zero condition less frequently. - check the global sum once every interval (this will delay zero detection for some interval, so it's probably a showstopper for vfsmounts). - keep a local count and only taking the global sum when local reaches 0 (this is difficult for vfsmounts, because we can't hold preempt off for the life of a reference, so a counter would need to be per-thread or tied strongly to a particular CPU which requires more locking). - keep a local difference of increments and decrements, which allows us to sum the total difference and hence find the refcount when summing all CPUs. Then, keep a single integer "long" refcount for slow and long lasting references, and only take the global sum of local counters when the long refcount is 0. This last scheme is what I implemented here. Attached mounts and process root and working directory references are "long" references, and everything else is a short reference. This allows scalable vfsmount references during path walking over mounted subtrees and unattached (lazy umounted) mounts with processes still running in them. This results in one fewer atomic op in the fastpath: mntget is now just a per-CPU inc, rather than an atomic inc; and mntput just requires a spinlock and non-atomic decrement in the common case. However code is otherwise bigger and heavier, so single threaded performance is basically a wash. Signed-off-by: Nick Piggin <npiggin@kernel.dk>
2011-01-07 06:50:11 +00:00
}
}
EXPORT_SYMBOL(mntput);
struct vfsmount *mntget(struct vfsmount *mnt)
{
if (mnt)
mnt_add_count(real_mount(mnt), 1);
fs: scale mntget/mntput The problem that this patch aims to fix is vfsmount refcounting scalability. We need to take a reference on the vfsmount for every successful path lookup, which often go to the same mount point. The fundamental difficulty is that a "simple" reference count can never be made scalable, because any time a reference is dropped, we must check whether that was the last reference. To do that requires communication with all other CPUs that may have taken a reference count. We can make refcounts more scalable in a couple of ways, involving keeping distributed counters, and checking for the global-zero condition less frequently. - check the global sum once every interval (this will delay zero detection for some interval, so it's probably a showstopper for vfsmounts). - keep a local count and only taking the global sum when local reaches 0 (this is difficult for vfsmounts, because we can't hold preempt off for the life of a reference, so a counter would need to be per-thread or tied strongly to a particular CPU which requires more locking). - keep a local difference of increments and decrements, which allows us to sum the total difference and hence find the refcount when summing all CPUs. Then, keep a single integer "long" refcount for slow and long lasting references, and only take the global sum of local counters when the long refcount is 0. This last scheme is what I implemented here. Attached mounts and process root and working directory references are "long" references, and everything else is a short reference. This allows scalable vfsmount references during path walking over mounted subtrees and unattached (lazy umounted) mounts with processes still running in them. This results in one fewer atomic op in the fastpath: mntget is now just a per-CPU inc, rather than an atomic inc; and mntput just requires a spinlock and non-atomic decrement in the common case. However code is otherwise bigger and heavier, so single threaded performance is basically a wash. Signed-off-by: Nick Piggin <npiggin@kernel.dk>
2011-01-07 06:50:11 +00:00
return mnt;
}
EXPORT_SYMBOL(mntget);
/*
* Make a mount point inaccessible to new lookups.
* Because there may still be current users, the caller MUST WAIT
* for an RCU grace period before destroying the mount point.
*/
void mnt_make_shortterm(struct vfsmount *mnt)
{
if (mnt)
real_mount(mnt)->mnt_ns = NULL;
}
/**
* path_is_mountpoint() - Check if path is a mount in the current namespace.
* @path: path to check
*
* d_mountpoint() can only be used reliably to establish if a dentry is
* not mounted in any namespace and that common case is handled inline.
* d_mountpoint() isn't aware of the possibility there may be multiple
* mounts using a given dentry in a different namespace. This function
* checks if the passed in path is a mountpoint rather than the dentry
* alone.
*/
bool path_is_mountpoint(const struct path *path)
{
unsigned seq;
bool res;
if (!d_mountpoint(path->dentry))
return false;
rcu_read_lock();
do {
seq = read_seqbegin(&mount_lock);
res = __path_is_mountpoint(path);
} while (read_seqretry(&mount_lock, seq));
rcu_read_unlock();
return res;
}
EXPORT_SYMBOL(path_is_mountpoint);
struct vfsmount *mnt_clone_internal(const struct path *path)
[PATCH] saner handling of auto_acct_off() and DQUOT_OFF() in umount The way we currently deal with quota and process accounting that might keep vfsmount busy at umount time is inherently broken; we try to turn them off just in case (not quite correctly, at that) and a) pray umount doesn't fail (otherwise they'll stay turned off) b) pray nobody doesn anything funny just as we turn quota off Moreover, LSM provides hooks for doing the same sort of broken logics. The proper way to deal with that is to introduce the second kind of reference to vfsmount. Semantics: - when the last normal reference is dropped, all special ones are converted to normal ones and if there had been any, cleanup is done. - normal reference can be cloned into a special one - special reference can be converted to normal one; that's a no-op if we'd already passed the point of no return (i.e. mntput() had converted special references to normal and started cleanup). The way it works: e.g. starting process accounting converts the vfsmount reference pinned by the opened file into special one and turns it back to normal when it gets shut down; acct_auto_close() is done when no normal references are left. That way it does *not* obstruct umount(2) and it silently gets turned off when the last normal reference to vfsmount is gone. Which is exactly what we want... The same should be done by LSM module that holds some internal references to vfsmount and wants to shut them down on umount - it should make them special and security_sb_umount_close() will be called exactly when the last normal reference to vfsmount is gone. quota handling is even simpler - we don't use normal file IO anymore, so there's no need to hold vfsmounts at all. DQUOT_OFF() is done from deactivate_super(), where it really belongs. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07 22:13:39 +00:00
{
struct mount *p;
p = clone_mnt(real_mount(path->mnt), path->dentry, CL_PRIVATE);
if (IS_ERR(p))
return ERR_CAST(p);
p->mnt.mnt_flags |= MNT_INTERNAL;
return &p->mnt;
[PATCH] saner handling of auto_acct_off() and DQUOT_OFF() in umount The way we currently deal with quota and process accounting that might keep vfsmount busy at umount time is inherently broken; we try to turn them off just in case (not quite correctly, at that) and a) pray umount doesn't fail (otherwise they'll stay turned off) b) pray nobody doesn anything funny just as we turn quota off Moreover, LSM provides hooks for doing the same sort of broken logics. The proper way to deal with that is to introduce the second kind of reference to vfsmount. Semantics: - when the last normal reference is dropped, all special ones are converted to normal ones and if there had been any, cleanup is done. - normal reference can be cloned into a special one - special reference can be converted to normal one; that's a no-op if we'd already passed the point of no return (i.e. mntput() had converted special references to normal and started cleanup). The way it works: e.g. starting process accounting converts the vfsmount reference pinned by the opened file into special one and turns it back to normal when it gets shut down; acct_auto_close() is done when no normal references are left. That way it does *not* obstruct umount(2) and it silently gets turned off when the last normal reference to vfsmount is gone. Which is exactly what we want... The same should be done by LSM module that holds some internal references to vfsmount and wants to shut them down on umount - it should make them special and security_sb_umount_close() will be called exactly when the last normal reference to vfsmount is gone. quota handling is even simpler - we don't use normal file IO anymore, so there's no need to hold vfsmounts at all. DQUOT_OFF() is done from deactivate_super(), where it really belongs. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07 22:13:39 +00:00
}
/*
* Returns the mount which either has the specified mnt_id, or has the next
* smallest id afer the specified one.
*/
static struct mount *mnt_find_id_at(struct mnt_namespace *ns, u64 mnt_id)
{
struct rb_node *node = ns->mounts.rb_node;
struct mount *ret = NULL;
while (node) {
struct mount *m = node_to_mount(node);
if (mnt_id <= m->mnt_id_unique) {
ret = node_to_mount(node);
if (mnt_id == m->mnt_id_unique)
break;
node = node->rb_left;
} else {
node = node->rb_right;
}
}
return ret;
}
/*
* Returns the mount which either has the specified mnt_id, or has the next
* greater id before the specified one.
*/
static struct mount *mnt_find_id_at_reverse(struct mnt_namespace *ns, u64 mnt_id)
{
struct rb_node *node = ns->mounts.rb_node;
struct mount *ret = NULL;
while (node) {
struct mount *m = node_to_mount(node);
if (mnt_id >= m->mnt_id_unique) {
ret = node_to_mount(node);
if (mnt_id == m->mnt_id_unique)
break;
node = node->rb_right;
} else {
node = node->rb_left;
}
}
return ret;
}
#ifdef CONFIG_PROC_FS
/* iterator; we want it to have access to namespace_sem, thus here... */
static void *m_start(struct seq_file *m, loff_t *pos)
{
fs: use seq_open_private() for proc_mounts A patchset to remove support for passing pre-allocated struct seq_file to seq_open(). Such feature is undocumented and prone to error. In particular, if seq_release() is used in release handler, it will kfree() a pointer which was not allocated by seq_open(). So this patchset drops support for pre-allocated struct seq_file: it's only of use in proc_namespace.c and can be easily replaced by using seq_open_private()/seq_release_private(). Additionally, it documents the use of file->private_data to hold pointer to struct seq_file by seq_open(). This patch (of 3): Since patch described below, from v2.6.15-rc1, seq_open() could use a struct seq_file already allocated by the caller if the pointer to the structure is stored in file->private_data before calling the function. Commit 1abe77b0fc4b485927f1f798ae81a752677e1d05 Author: Al Viro <viro@zeniv.linux.org.uk> Date: Mon Nov 7 17:15:34 2005 -0500 [PATCH] allow callers of seq_open do allocation themselves Allow caller of seq_open() to kmalloc() seq_file + whatever else they want and set ->private_data to it. seq_open() will then abstain from doing allocation itself. Such behavior is only used by mounts_open_common(). In order to drop support for such uncommon feature, proc_mounts is converted to use seq_open_private(), which take care of allocating the proc_mounts structure, making it available through ->private in struct seq_file. Conversely, proc_mounts is converted to use seq_release_private(), in order to release the private structure allocated by seq_open_private(). Then, ->private is used directly instead of proc_mounts() macro to access to the proc_mounts structure. Link: http://lkml.kernel.org/r/cover.1433193673.git.ydroneaud@opteya.com Signed-off-by: Yann Droneaud <ydroneaud@opteya.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-06-30 21:57:30 +00:00
struct proc_mounts *p = m->private;
down_read(&namespace_sem);
return mnt_find_id_at(p->ns, *pos);
}
static void *m_next(struct seq_file *m, void *v, loff_t *pos)
{
struct mount *next = NULL, *mnt = v;
struct rb_node *node = rb_next(&mnt->mnt_node);
++*pos;
if (node) {
next = node_to_mount(node);
*pos = next->mnt_id_unique;
}
return next;
}
static void m_stop(struct seq_file *m, void *v)
{
up_read(&namespace_sem);
}
static int m_show(struct seq_file *m, void *v)
{
fs: use seq_open_private() for proc_mounts A patchset to remove support for passing pre-allocated struct seq_file to seq_open(). Such feature is undocumented and prone to error. In particular, if seq_release() is used in release handler, it will kfree() a pointer which was not allocated by seq_open(). So this patchset drops support for pre-allocated struct seq_file: it's only of use in proc_namespace.c and can be easily replaced by using seq_open_private()/seq_release_private(). Additionally, it documents the use of file->private_data to hold pointer to struct seq_file by seq_open(). This patch (of 3): Since patch described below, from v2.6.15-rc1, seq_open() could use a struct seq_file already allocated by the caller if the pointer to the structure is stored in file->private_data before calling the function. Commit 1abe77b0fc4b485927f1f798ae81a752677e1d05 Author: Al Viro <viro@zeniv.linux.org.uk> Date: Mon Nov 7 17:15:34 2005 -0500 [PATCH] allow callers of seq_open do allocation themselves Allow caller of seq_open() to kmalloc() seq_file + whatever else they want and set ->private_data to it. seq_open() will then abstain from doing allocation itself. Such behavior is only used by mounts_open_common(). In order to drop support for such uncommon feature, proc_mounts is converted to use seq_open_private(), which take care of allocating the proc_mounts structure, making it available through ->private in struct seq_file. Conversely, proc_mounts is converted to use seq_release_private(), in order to release the private structure allocated by seq_open_private(). Then, ->private is used directly instead of proc_mounts() macro to access to the proc_mounts structure. Link: http://lkml.kernel.org/r/cover.1433193673.git.ydroneaud@opteya.com Signed-off-by: Yann Droneaud <ydroneaud@opteya.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-06-30 21:57:30 +00:00
struct proc_mounts *p = m->private;
struct mount *r = v;
return p->show(m, &r->mnt);
}
const struct seq_operations mounts_op = {
.start = m_start,
.next = m_next,
.stop = m_stop,
.show = m_show,
};
#endif /* CONFIG_PROC_FS */
/**
* may_umount_tree - check if a mount tree is busy
* @m: root of mount tree
*
* This is called to check if a tree of mounts has any
* open files, pwds, chroots or sub mounts that are
* busy.
*/
int may_umount_tree(struct vfsmount *m)
{
struct mount *mnt = real_mount(m);
int actual_refs = 0;
int minimum_refs = 0;
struct mount *p;
BUG_ON(!m);
fs: scale mntget/mntput The problem that this patch aims to fix is vfsmount refcounting scalability. We need to take a reference on the vfsmount for every successful path lookup, which often go to the same mount point. The fundamental difficulty is that a "simple" reference count can never be made scalable, because any time a reference is dropped, we must check whether that was the last reference. To do that requires communication with all other CPUs that may have taken a reference count. We can make refcounts more scalable in a couple of ways, involving keeping distributed counters, and checking for the global-zero condition less frequently. - check the global sum once every interval (this will delay zero detection for some interval, so it's probably a showstopper for vfsmounts). - keep a local count and only taking the global sum when local reaches 0 (this is difficult for vfsmounts, because we can't hold preempt off for the life of a reference, so a counter would need to be per-thread or tied strongly to a particular CPU which requires more locking). - keep a local difference of increments and decrements, which allows us to sum the total difference and hence find the refcount when summing all CPUs. Then, keep a single integer "long" refcount for slow and long lasting references, and only take the global sum of local counters when the long refcount is 0. This last scheme is what I implemented here. Attached mounts and process root and working directory references are "long" references, and everything else is a short reference. This allows scalable vfsmount references during path walking over mounted subtrees and unattached (lazy umounted) mounts with processes still running in them. This results in one fewer atomic op in the fastpath: mntget is now just a per-CPU inc, rather than an atomic inc; and mntput just requires a spinlock and non-atomic decrement in the common case. However code is otherwise bigger and heavier, so single threaded performance is basically a wash. Signed-off-by: Nick Piggin <npiggin@kernel.dk>
2011-01-07 06:50:11 +00:00
/* write lock needed for mnt_get_count */
lock_mount_hash();
for (p = mnt; p; p = next_mnt(p, mnt)) {
actual_refs += mnt_get_count(p);
minimum_refs += 2;
}
unlock_mount_hash();
if (actual_refs > minimum_refs)
return 0;
return 1;
}
EXPORT_SYMBOL(may_umount_tree);
/**
* may_umount - check if a mount point is busy
* @mnt: root of mount
*
* This is called to check if a mount point has any
* open files, pwds, chroots or sub mounts. If the
* mount has sub mounts this will return busy
* regardless of whether the sub mounts are busy.
*
* Doesn't take quota and stuff into account. IOW, in some cases it will
* give false negatives. The main reason why it's here is that we need
* a non-destructive way to look for easily umountable filesystems.
*/
int may_umount(struct vfsmount *mnt)
{
int ret = 1;
down_read(&namespace_sem);
lock_mount_hash();
if (propagate_mount_busy(real_mount(mnt), 2))
ret = 0;
unlock_mount_hash();
up_read(&namespace_sem);
return ret;
}
EXPORT_SYMBOL(may_umount);
static void namespace_unlock(void)
{
struct hlist_head head;
struct hlist_node *p;
struct mount *m;
LIST_HEAD(list);
hlist_move_list(&unmounted, &head);
list_splice_init(&ex_mountpoints, &list);
up_write(&namespace_sem);
shrink_dentry_list(&list);
if (likely(hlist_empty(&head)))
return;
synchronize_rcu_expedited();
RCU'd vfsmounts * RCU-delayed freeing of vfsmounts * vfsmount_lock replaced with a seqlock (mount_lock) * sequence number from mount_lock is stored in nameidata->m_seq and used when we exit RCU mode * new vfsmount flag - MNT_SYNC_UMOUNT. Set by umount_tree() when its caller knows that vfsmount will have no surviving references. * synchronize_rcu() done between unlocking namespace_sem in namespace_unlock() and doing pending mntput(). * new helper: legitimize_mnt(mnt, seq). Checks the mount_lock sequence number against seq, then grabs reference to mnt. Then it rechecks mount_lock again to close the race and either returns success or drops the reference it has acquired. The subtle point is that in case of MNT_SYNC_UMOUNT we can simply decrement the refcount and sod off - aforementioned synchronize_rcu() makes sure that final mntput() won't come until we leave RCU mode. We need that, since we don't want to end up with some lazy pathwalk racing with umount() and stealing the final mntput() from it - caller of umount() may expect it to return only once the fs is shut down and we don't want to break that. In other cases (i.e. with MNT_SYNC_UMOUNT absent) we have to do full-blown mntput() in case of mount_lock sequence number mismatch happening just as we'd grabbed the reference, but in those cases we won't be stealing the final mntput() from anything that would care. * mntput_no_expire() doesn't lock anything on the fast path now. Incidentally, SMP and UP cases are handled the same way - no ifdefs there. * normal pathname resolution does *not* do any writes to mount_lock. It does, of course, bump the refcounts of vfsmount and dentry in the very end, but that's it. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-09-30 02:06:07 +00:00
hlist_for_each_entry_safe(m, p, &head, mnt_umount) {
hlist_del(&m->mnt_umount);
mntput(&m->mnt);
}
}
static inline void namespace_lock(void)
{
down_write(&namespace_sem);
}
enum umount_tree_flags {
UMOUNT_SYNC = 1,
UMOUNT_PROPAGATE = 2,
UMOUNT_CONNECTED = 4,
};
static bool disconnect_mount(struct mount *mnt, enum umount_tree_flags how)
{
/* Leaving mounts connected is only valid for lazy umounts */
if (how & UMOUNT_SYNC)
return true;
/* A mount without a parent has nothing to be connected to */
if (!mnt_has_parent(mnt))
return true;
/* Because the reference counting rules change when mounts are
* unmounted and connected, umounted mounts may not be
* connected to mounted mounts.
*/
if (!(mnt->mnt_parent->mnt.mnt_flags & MNT_UMOUNT))
return true;
/* Has it been requested that the mount remain connected? */
if (how & UMOUNT_CONNECTED)
return false;
/* Is the mount locked such that it needs to remain connected? */
if (IS_MNT_LOCKED(mnt))
return false;
/* By default disconnect the mount */
return true;
}
/*
RCU'd vfsmounts * RCU-delayed freeing of vfsmounts * vfsmount_lock replaced with a seqlock (mount_lock) * sequence number from mount_lock is stored in nameidata->m_seq and used when we exit RCU mode * new vfsmount flag - MNT_SYNC_UMOUNT. Set by umount_tree() when its caller knows that vfsmount will have no surviving references. * synchronize_rcu() done between unlocking namespace_sem in namespace_unlock() and doing pending mntput(). * new helper: legitimize_mnt(mnt, seq). Checks the mount_lock sequence number against seq, then grabs reference to mnt. Then it rechecks mount_lock again to close the race and either returns success or drops the reference it has acquired. The subtle point is that in case of MNT_SYNC_UMOUNT we can simply decrement the refcount and sod off - aforementioned synchronize_rcu() makes sure that final mntput() won't come until we leave RCU mode. We need that, since we don't want to end up with some lazy pathwalk racing with umount() and stealing the final mntput() from it - caller of umount() may expect it to return only once the fs is shut down and we don't want to break that. In other cases (i.e. with MNT_SYNC_UMOUNT absent) we have to do full-blown mntput() in case of mount_lock sequence number mismatch happening just as we'd grabbed the reference, but in those cases we won't be stealing the final mntput() from anything that would care. * mntput_no_expire() doesn't lock anything on the fast path now. Incidentally, SMP and UP cases are handled the same way - no ifdefs there. * normal pathname resolution does *not* do any writes to mount_lock. It does, of course, bump the refcounts of vfsmount and dentry in the very end, but that's it. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-09-30 02:06:07 +00:00
* mount_lock must be held
* namespace_sem must be held for write
*/
static void umount_tree(struct mount *mnt, enum umount_tree_flags how)
{
LIST_HEAD(tmp_list);
struct mount *p;
if (how & UMOUNT_PROPAGATE)
propagate_mount_unlock(mnt);
/* Gather the mounts to umount */
for (p = mnt; p; p = next_mnt(p, mnt)) {
p->mnt.mnt_flags |= MNT_UMOUNT;
if (p->mnt.mnt_flags & MNT_ONRB)
move_from_ns(p, &tmp_list);
else
list_move(&p->mnt_list, &tmp_list);
}
/* Hide the mounts from mnt_mounts */
list_for_each_entry(p, &tmp_list, mnt_list) {
list_del_init(&p->mnt_child);
}
/* Add propagated mounts to the tmp_list */
if (how & UMOUNT_PROPAGATE)
propagate_umount(&tmp_list);
while (!list_empty(&tmp_list)) {
mnt: Add a per mount namespace limit on the number of mounts CAI Qian <caiqian@redhat.com> pointed out that the semantics of shared subtrees make it possible to create an exponentially increasing number of mounts in a mount namespace. mkdir /tmp/1 /tmp/2 mount --make-rshared / for i in $(seq 1 20) ; do mount --bind /tmp/1 /tmp/2 ; done Will create create 2^20 or 1048576 mounts, which is a practical problem as some people have managed to hit this by accident. As such CVE-2016-6213 was assigned. Ian Kent <raven@themaw.net> described the situation for autofs users as follows: > The number of mounts for direct mount maps is usually not very large because of > the way they are implemented, large direct mount maps can have performance > problems. There can be anywhere from a few (likely case a few hundred) to less > than 10000, plus mounts that have been triggered and not yet expired. > > Indirect mounts have one autofs mount at the root plus the number of mounts that > have been triggered and not yet expired. > > The number of autofs indirect map entries can range from a few to the common > case of several thousand and in rare cases up to between 30000 and 50000. I've > not heard of people with maps larger than 50000 entries. > > The larger the number of map entries the greater the possibility for a large > number of active mounts so it's not hard to expect cases of a 1000 or somewhat > more active mounts. So I am setting the default number of mounts allowed per mount namespace at 100,000. This is more than enough for any use case I know of, but small enough to quickly stop an exponential increase in mounts. Which should be perfect to catch misconfigurations and malfunctioning programs. For anyone who needs a higher limit this can be changed by writing to the new /proc/sys/fs/mount-max sysctl. Tested-by: CAI Qian <caiqian@redhat.com> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2016-09-28 05:27:17 +00:00
struct mnt_namespace *ns;
bool disconnect;
p = list_first_entry(&tmp_list, struct mount, mnt_list);
list_del_init(&p->mnt_expire);
list_del_init(&p->mnt_list);
mnt: Add a per mount namespace limit on the number of mounts CAI Qian <caiqian@redhat.com> pointed out that the semantics of shared subtrees make it possible to create an exponentially increasing number of mounts in a mount namespace. mkdir /tmp/1 /tmp/2 mount --make-rshared / for i in $(seq 1 20) ; do mount --bind /tmp/1 /tmp/2 ; done Will create create 2^20 or 1048576 mounts, which is a practical problem as some people have managed to hit this by accident. As such CVE-2016-6213 was assigned. Ian Kent <raven@themaw.net> described the situation for autofs users as follows: > The number of mounts for direct mount maps is usually not very large because of > the way they are implemented, large direct mount maps can have performance > problems. There can be anywhere from a few (likely case a few hundred) to less > than 10000, plus mounts that have been triggered and not yet expired. > > Indirect mounts have one autofs mount at the root plus the number of mounts that > have been triggered and not yet expired. > > The number of autofs indirect map entries can range from a few to the common > case of several thousand and in rare cases up to between 30000 and 50000. I've > not heard of people with maps larger than 50000 entries. > > The larger the number of map entries the greater the possibility for a large > number of active mounts so it's not hard to expect cases of a 1000 or somewhat > more active mounts. So I am setting the default number of mounts allowed per mount namespace at 100,000. This is more than enough for any use case I know of, but small enough to quickly stop an exponential increase in mounts. Which should be perfect to catch misconfigurations and malfunctioning programs. For anyone who needs a higher limit this can be changed by writing to the new /proc/sys/fs/mount-max sysctl. Tested-by: CAI Qian <caiqian@redhat.com> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2016-09-28 05:27:17 +00:00
ns = p->mnt_ns;
if (ns) {
ns->nr_mounts--;
mnt: Add a per mount namespace limit on the number of mounts CAI Qian <caiqian@redhat.com> pointed out that the semantics of shared subtrees make it possible to create an exponentially increasing number of mounts in a mount namespace. mkdir /tmp/1 /tmp/2 mount --make-rshared / for i in $(seq 1 20) ; do mount --bind /tmp/1 /tmp/2 ; done Will create create 2^20 or 1048576 mounts, which is a practical problem as some people have managed to hit this by accident. As such CVE-2016-6213 was assigned. Ian Kent <raven@themaw.net> described the situation for autofs users as follows: > The number of mounts for direct mount maps is usually not very large because of > the way they are implemented, large direct mount maps can have performance > problems. There can be anywhere from a few (likely case a few hundred) to less > than 10000, plus mounts that have been triggered and not yet expired. > > Indirect mounts have one autofs mount at the root plus the number of mounts that > have been triggered and not yet expired. > > The number of autofs indirect map entries can range from a few to the common > case of several thousand and in rare cases up to between 30000 and 50000. I've > not heard of people with maps larger than 50000 entries. > > The larger the number of map entries the greater the possibility for a large > number of active mounts so it's not hard to expect cases of a 1000 or somewhat > more active mounts. So I am setting the default number of mounts allowed per mount namespace at 100,000. This is more than enough for any use case I know of, but small enough to quickly stop an exponential increase in mounts. Which should be perfect to catch misconfigurations and malfunctioning programs. For anyone who needs a higher limit this can be changed by writing to the new /proc/sys/fs/mount-max sysctl. Tested-by: CAI Qian <caiqian@redhat.com> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2016-09-28 05:27:17 +00:00
__touch_mnt_namespace(ns);
}
p->mnt_ns = NULL;
if (how & UMOUNT_SYNC)
RCU'd vfsmounts * RCU-delayed freeing of vfsmounts * vfsmount_lock replaced with a seqlock (mount_lock) * sequence number from mount_lock is stored in nameidata->m_seq and used when we exit RCU mode * new vfsmount flag - MNT_SYNC_UMOUNT. Set by umount_tree() when its caller knows that vfsmount will have no surviving references. * synchronize_rcu() done between unlocking namespace_sem in namespace_unlock() and doing pending mntput(). * new helper: legitimize_mnt(mnt, seq). Checks the mount_lock sequence number against seq, then grabs reference to mnt. Then it rechecks mount_lock again to close the race and either returns success or drops the reference it has acquired. The subtle point is that in case of MNT_SYNC_UMOUNT we can simply decrement the refcount and sod off - aforementioned synchronize_rcu() makes sure that final mntput() won't come until we leave RCU mode. We need that, since we don't want to end up with some lazy pathwalk racing with umount() and stealing the final mntput() from it - caller of umount() may expect it to return only once the fs is shut down and we don't want to break that. In other cases (i.e. with MNT_SYNC_UMOUNT absent) we have to do full-blown mntput() in case of mount_lock sequence number mismatch happening just as we'd grabbed the reference, but in those cases we won't be stealing the final mntput() from anything that would care. * mntput_no_expire() doesn't lock anything on the fast path now. Incidentally, SMP and UP cases are handled the same way - no ifdefs there. * normal pathname resolution does *not* do any writes to mount_lock. It does, of course, bump the refcounts of vfsmount and dentry in the very end, but that's it. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-09-30 02:06:07 +00:00
p->mnt.mnt_flags |= MNT_SYNC_UMOUNT;
disconnect = disconnect_mount(p, how);
if (mnt_has_parent(p)) {
mnt_add_count(p->mnt_parent, -1);
if (!disconnect) {
/* Don't forget about p */
list_add_tail(&p->mnt_child, &p->mnt_parent->mnt_mounts);
} else {
umount_mnt(p);
}
}
change_mnt_propagation(p, MS_PRIVATE);
if (disconnect)
hlist_add_head(&p->mnt_umount, &unmounted);
}
}
static void shrink_submounts(struct mount *mnt);
static int do_umount_root(struct super_block *sb)
{
int ret = 0;
down_write(&sb->s_umount);
if (!sb_rdonly(sb)) {
struct fs_context *fc;
fc = fs_context_for_reconfigure(sb->s_root, SB_RDONLY,
SB_RDONLY);
if (IS_ERR(fc)) {
ret = PTR_ERR(fc);
} else {
ret = parse_monolithic_mount_data(fc, NULL);
if (!ret)
ret = reconfigure_super(fc);
put_fs_context(fc);
}
}
up_write(&sb->s_umount);
return ret;
}
static int do_umount(struct mount *mnt, int flags)
{
struct super_block *sb = mnt->mnt.mnt_sb;
int retval;
retval = security_sb_umount(&mnt->mnt, flags);
if (retval)
return retval;
/*
* Allow userspace to request a mountpoint be expired rather than
* unmounting unconditionally. Unmount only happens if:
* (1) the mark is already set (the mark is cleared by mntput())
* (2) the usage count == 1 [parent vfsmount] + 1 [sys_umount]
*/
if (flags & MNT_EXPIRE) {
if (&mnt->mnt == current->fs->root.mnt ||
flags & (MNT_FORCE | MNT_DETACH))
return -EINVAL;
fs: scale mntget/mntput The problem that this patch aims to fix is vfsmount refcounting scalability. We need to take a reference on the vfsmount for every successful path lookup, which often go to the same mount point. The fundamental difficulty is that a "simple" reference count can never be made scalable, because any time a reference is dropped, we must check whether that was the last reference. To do that requires communication with all other CPUs that may have taken a reference count. We can make refcounts more scalable in a couple of ways, involving keeping distributed counters, and checking for the global-zero condition less frequently. - check the global sum once every interval (this will delay zero detection for some interval, so it's probably a showstopper for vfsmounts). - keep a local count and only taking the global sum when local reaches 0 (this is difficult for vfsmounts, because we can't hold preempt off for the life of a reference, so a counter would need to be per-thread or tied strongly to a particular CPU which requires more locking). - keep a local difference of increments and decrements, which allows us to sum the total difference and hence find the refcount when summing all CPUs. Then, keep a single integer "long" refcount for slow and long lasting references, and only take the global sum of local counters when the long refcount is 0. This last scheme is what I implemented here. Attached mounts and process root and working directory references are "long" references, and everything else is a short reference. This allows scalable vfsmount references during path walking over mounted subtrees and unattached (lazy umounted) mounts with processes still running in them. This results in one fewer atomic op in the fastpath: mntget is now just a per-CPU inc, rather than an atomic inc; and mntput just requires a spinlock and non-atomic decrement in the common case. However code is otherwise bigger and heavier, so single threaded performance is basically a wash. Signed-off-by: Nick Piggin <npiggin@kernel.dk>
2011-01-07 06:50:11 +00:00
/*
* probably don't strictly need the lock here if we examined
* all race cases, but it's a slowpath.
*/
lock_mount_hash();
if (mnt_get_count(mnt) != 2) {
unlock_mount_hash();
return -EBUSY;
fs: scale mntget/mntput The problem that this patch aims to fix is vfsmount refcounting scalability. We need to take a reference on the vfsmount for every successful path lookup, which often go to the same mount point. The fundamental difficulty is that a "simple" reference count can never be made scalable, because any time a reference is dropped, we must check whether that was the last reference. To do that requires communication with all other CPUs that may have taken a reference count. We can make refcounts more scalable in a couple of ways, involving keeping distributed counters, and checking for the global-zero condition less frequently. - check the global sum once every interval (this will delay zero detection for some interval, so it's probably a showstopper for vfsmounts). - keep a local count and only taking the global sum when local reaches 0 (this is difficult for vfsmounts, because we can't hold preempt off for the life of a reference, so a counter would need to be per-thread or tied strongly to a particular CPU which requires more locking). - keep a local difference of increments and decrements, which allows us to sum the total difference and hence find the refcount when summing all CPUs. Then, keep a single integer "long" refcount for slow and long lasting references, and only take the global sum of local counters when the long refcount is 0. This last scheme is what I implemented here. Attached mounts and process root and working directory references are "long" references, and everything else is a short reference. This allows scalable vfsmount references during path walking over mounted subtrees and unattached (lazy umounted) mounts with processes still running in them. This results in one fewer atomic op in the fastpath: mntget is now just a per-CPU inc, rather than an atomic inc; and mntput just requires a spinlock and non-atomic decrement in the common case. However code is otherwise bigger and heavier, so single threaded performance is basically a wash. Signed-off-by: Nick Piggin <npiggin@kernel.dk>
2011-01-07 06:50:11 +00:00
}
unlock_mount_hash();
if (!xchg(&mnt->mnt_expiry_mark, 1))
return -EAGAIN;
}
/*
* If we may have to abort operations to get out of this
* mount, and they will themselves hold resources we must
* allow the fs to do things. In the Unix tradition of
* 'Gee thats tricky lets do it in userspace' the umount_begin
* might fail to complete on the first run through as other tasks
* must return, and the like. Thats for the mount program to worry
* about for the moment.
*/
if (flags & MNT_FORCE && sb->s_op->umount_begin) {
sb->s_op->umount_begin(sb);
}
/*
* No sense to grab the lock for this test, but test itself looks
* somewhat bogus. Suggestions for better replacement?
* Ho-hum... In principle, we might treat that as umount + switch
* to rootfs. GC would eventually take care of the old vfsmount.
* Actually it makes sense, especially if rootfs would contain a
* /reboot - static binary that would close all descriptors and
* call reboot(9). Then init(8) could umount root and exec /reboot.
*/
if (&mnt->mnt == current->fs->root.mnt && !(flags & MNT_DETACH)) {
/*
* Special case for "unmounting" root ...
* we just try to remount it readonly.
*/
if (!ns_capable(sb->s_user_ns, CAP_SYS_ADMIN))
return -EPERM;
return do_umount_root(sb);
}
namespace_lock();
lock_mount_hash();
/* Recheck MNT_LOCKED with the locks held */
retval = -EINVAL;
if (mnt->mnt.mnt_flags & MNT_LOCKED)
goto out;
event++;
RCU'd vfsmounts * RCU-delayed freeing of vfsmounts * vfsmount_lock replaced with a seqlock (mount_lock) * sequence number from mount_lock is stored in nameidata->m_seq and used when we exit RCU mode * new vfsmount flag - MNT_SYNC_UMOUNT. Set by umount_tree() when its caller knows that vfsmount will have no surviving references. * synchronize_rcu() done between unlocking namespace_sem in namespace_unlock() and doing pending mntput(). * new helper: legitimize_mnt(mnt, seq). Checks the mount_lock sequence number against seq, then grabs reference to mnt. Then it rechecks mount_lock again to close the race and either returns success or drops the reference it has acquired. The subtle point is that in case of MNT_SYNC_UMOUNT we can simply decrement the refcount and sod off - aforementioned synchronize_rcu() makes sure that final mntput() won't come until we leave RCU mode. We need that, since we don't want to end up with some lazy pathwalk racing with umount() and stealing the final mntput() from it - caller of umount() may expect it to return only once the fs is shut down and we don't want to break that. In other cases (i.e. with MNT_SYNC_UMOUNT absent) we have to do full-blown mntput() in case of mount_lock sequence number mismatch happening just as we'd grabbed the reference, but in those cases we won't be stealing the final mntput() from anything that would care. * mntput_no_expire() doesn't lock anything on the fast path now. Incidentally, SMP and UP cases are handled the same way - no ifdefs there. * normal pathname resolution does *not* do any writes to mount_lock. It does, of course, bump the refcounts of vfsmount and dentry in the very end, but that's it. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-09-30 02:06:07 +00:00
if (flags & MNT_DETACH) {
if (mnt->mnt.mnt_flags & MNT_ONRB ||
!list_empty(&mnt->mnt_list))
umount_tree(mnt, UMOUNT_PROPAGATE);
retval = 0;
RCU'd vfsmounts * RCU-delayed freeing of vfsmounts * vfsmount_lock replaced with a seqlock (mount_lock) * sequence number from mount_lock is stored in nameidata->m_seq and used when we exit RCU mode * new vfsmount flag - MNT_SYNC_UMOUNT. Set by umount_tree() when its caller knows that vfsmount will have no surviving references. * synchronize_rcu() done between unlocking namespace_sem in namespace_unlock() and doing pending mntput(). * new helper: legitimize_mnt(mnt, seq). Checks the mount_lock sequence number against seq, then grabs reference to mnt. Then it rechecks mount_lock again to close the race and either returns success or drops the reference it has acquired. The subtle point is that in case of MNT_SYNC_UMOUNT we can simply decrement the refcount and sod off - aforementioned synchronize_rcu() makes sure that final mntput() won't come until we leave RCU mode. We need that, since we don't want to end up with some lazy pathwalk racing with umount() and stealing the final mntput() from it - caller of umount() may expect it to return only once the fs is shut down and we don't want to break that. In other cases (i.e. with MNT_SYNC_UMOUNT absent) we have to do full-blown mntput() in case of mount_lock sequence number mismatch happening just as we'd grabbed the reference, but in those cases we won't be stealing the final mntput() from anything that would care. * mntput_no_expire() doesn't lock anything on the fast path now. Incidentally, SMP and UP cases are handled the same way - no ifdefs there. * normal pathname resolution does *not* do any writes to mount_lock. It does, of course, bump the refcounts of vfsmount and dentry in the very end, but that's it. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-09-30 02:06:07 +00:00
} else {
shrink_submounts(mnt);
retval = -EBUSY;
if (!propagate_mount_busy(mnt, 2)) {
if (mnt->mnt.mnt_flags & MNT_ONRB ||
!list_empty(&mnt->mnt_list))
umount_tree(mnt, UMOUNT_PROPAGATE|UMOUNT_SYNC);
RCU'd vfsmounts * RCU-delayed freeing of vfsmounts * vfsmount_lock replaced with a seqlock (mount_lock) * sequence number from mount_lock is stored in nameidata->m_seq and used when we exit RCU mode * new vfsmount flag - MNT_SYNC_UMOUNT. Set by umount_tree() when its caller knows that vfsmount will have no surviving references. * synchronize_rcu() done between unlocking namespace_sem in namespace_unlock() and doing pending mntput(). * new helper: legitimize_mnt(mnt, seq). Checks the mount_lock sequence number against seq, then grabs reference to mnt. Then it rechecks mount_lock again to close the race and either returns success or drops the reference it has acquired. The subtle point is that in case of MNT_SYNC_UMOUNT we can simply decrement the refcount and sod off - aforementioned synchronize_rcu() makes sure that final mntput() won't come until we leave RCU mode. We need that, since we don't want to end up with some lazy pathwalk racing with umount() and stealing the final mntput() from it - caller of umount() may expect it to return only once the fs is shut down and we don't want to break that. In other cases (i.e. with MNT_SYNC_UMOUNT absent) we have to do full-blown mntput() in case of mount_lock sequence number mismatch happening just as we'd grabbed the reference, but in those cases we won't be stealing the final mntput() from anything that would care. * mntput_no_expire() doesn't lock anything on the fast path now. Incidentally, SMP and UP cases are handled the same way - no ifdefs there. * normal pathname resolution does *not* do any writes to mount_lock. It does, of course, bump the refcounts of vfsmount and dentry in the very end, but that's it. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-09-30 02:06:07 +00:00
retval = 0;
}
}
out:
unlock_mount_hash();
namespace_unlock();
return retval;
}
/*
* __detach_mounts - lazily unmount all mounts on the specified dentry
*
* During unlink, rmdir, and d_drop it is possible to loose the path
* to an existing mountpoint, and wind up leaking the mount.
* detach_mounts allows lazily unmounting those mounts instead of
* leaking them.
*
* The caller may hold dentry->d_inode->i_mutex.
*/
void __detach_mounts(struct dentry *dentry)
{
struct mountpoint *mp;
struct mount *mnt;
namespace_lock();
mnt: Protect the mountpoint hashtable with mount_lock Protecting the mountpoint hashtable with namespace_sem was sufficient until a call to umount_mnt was added to mntput_no_expire. At which point it became possible for multiple calls of put_mountpoint on the same hash chain to happen on the same time. Kristen Johansen <kjlx@templeofstupid.com> reported: > This can cause a panic when simultaneous callers of put_mountpoint > attempt to free the same mountpoint. This occurs because some callers > hold the mount_hash_lock, while others hold the namespace lock. Some > even hold both. > > In this submitter's case, the panic manifested itself as a GP fault in > put_mountpoint() when it called hlist_del() and attempted to dereference > a m_hash.pprev that had been poisioned by another thread. Al Viro observed that the simple fix is to switch from using the namespace_sem to the mount_lock to protect the mountpoint hash table. I have taken Al's suggested patch moved put_mountpoint in pivot_root (instead of taking mount_lock an additional time), and have replaced new_mountpoint with get_mountpoint a function that does the hash table lookup and addition under the mount_lock. The introduction of get_mounptoint ensures that only the mount_lock is needed to manipulate the mountpoint hashtable. d_set_mounted is modified to only set DCACHE_MOUNTED if it is not already set. This allows get_mountpoint to use the setting of DCACHE_MOUNTED to ensure adding a struct mountpoint for a dentry happens exactly once. Cc: stable@vger.kernel.org Fixes: ce07d891a089 ("mnt: Honor MNT_LOCKED when detaching mounts") Reported-by: Krister Johansen <kjlx@templeofstupid.com> Suggested-by: Al Viro <viro@ZenIV.linux.org.uk> Acked-by: Al Viro <viro@ZenIV.linux.org.uk> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2017-01-03 01:18:43 +00:00
lock_mount_hash();
mp = lookup_mountpoint(dentry);
if (!mp)
goto out_unlock;
event++;
while (!hlist_empty(&mp->m_list)) {
mnt = hlist_entry(mp->m_list.first, struct mount, mnt_mp_list);
if (mnt->mnt.mnt_flags & MNT_UMOUNT) {
umount_mnt(mnt);
hlist_add_head(&mnt->mnt_umount, &unmounted);
}
else umount_tree(mnt, UMOUNT_CONNECTED);
}
put_mountpoint(mp);
out_unlock:
mnt: Protect the mountpoint hashtable with mount_lock Protecting the mountpoint hashtable with namespace_sem was sufficient until a call to umount_mnt was added to mntput_no_expire. At which point it became possible for multiple calls of put_mountpoint on the same hash chain to happen on the same time. Kristen Johansen <kjlx@templeofstupid.com> reported: > This can cause a panic when simultaneous callers of put_mountpoint > attempt to free the same mountpoint. This occurs because some callers > hold the mount_hash_lock, while others hold the namespace lock. Some > even hold both. > > In this submitter's case, the panic manifested itself as a GP fault in > put_mountpoint() when it called hlist_del() and attempted to dereference > a m_hash.pprev that had been poisioned by another thread. Al Viro observed that the simple fix is to switch from using the namespace_sem to the mount_lock to protect the mountpoint hash table. I have taken Al's suggested patch moved put_mountpoint in pivot_root (instead of taking mount_lock an additional time), and have replaced new_mountpoint with get_mountpoint a function that does the hash table lookup and addition under the mount_lock. The introduction of get_mounptoint ensures that only the mount_lock is needed to manipulate the mountpoint hashtable. d_set_mounted is modified to only set DCACHE_MOUNTED if it is not already set. This allows get_mountpoint to use the setting of DCACHE_MOUNTED to ensure adding a struct mountpoint for a dentry happens exactly once. Cc: stable@vger.kernel.org Fixes: ce07d891a089 ("mnt: Honor MNT_LOCKED when detaching mounts") Reported-by: Krister Johansen <kjlx@templeofstupid.com> Suggested-by: Al Viro <viro@ZenIV.linux.org.uk> Acked-by: Al Viro <viro@ZenIV.linux.org.uk> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2017-01-03 01:18:43 +00:00
unlock_mount_hash();
namespace_unlock();
}
/*
* Is the caller allowed to modify his namespace?
*/
bool may_mount(void)
{
return ns_capable(current->nsproxy->mnt_ns->user_ns, CAP_SYS_ADMIN);
}
static void warn_mandlock(void)
{
pr_warn_once("=======================================================\n"
"WARNING: The mand mount option has been deprecated and\n"
" and is ignored by this kernel. Remove the mand\n"
" option from the mount to silence this warning.\n"
"=======================================================\n");
}
static int can_umount(const struct path *path, int flags)
{
struct mount *mnt = real_mount(path->mnt);
if (!may_mount())
return -EPERM;
if (!path_mounted(path))
return -EINVAL;
if (!check_mnt(mnt))
return -EINVAL;
if (mnt->mnt.mnt_flags & MNT_LOCKED) /* Check optimistically */
return -EINVAL;
if (flags & MNT_FORCE && !capable(CAP_SYS_ADMIN))
return -EPERM;
return 0;
}
// caller is responsible for flags being sane
int path_umount(struct path *path, int flags)
{
struct mount *mnt = real_mount(path->mnt);
int ret;
ret = can_umount(path, flags);
if (!ret)
ret = do_umount(mnt, flags);
/* we mustn't call path_put() as that would clear mnt_expiry_mark */
dput(path->dentry);
mntput_no_expire(mnt);
return ret;
}
static int ksys_umount(char __user *name, int flags)
{
int lookup_flags = LOOKUP_MOUNTPOINT;
struct path path;
int ret;
// basic validity checks done first
if (flags & ~(MNT_FORCE | MNT_DETACH | MNT_EXPIRE | UMOUNT_NOFOLLOW))
return -EINVAL;
if (!(flags & UMOUNT_NOFOLLOW))
lookup_flags |= LOOKUP_FOLLOW;
ret = user_path_at(AT_FDCWD, name, lookup_flags, &path);
if (ret)
return ret;
return path_umount(&path, flags);
}
SYSCALL_DEFINE2(umount, char __user *, name, int, flags)
{
return ksys_umount(name, flags);
}
#ifdef __ARCH_WANT_SYS_OLDUMOUNT
/*
* The 2.0 compatible umount. No flags.
*/
SYSCALL_DEFINE1(oldumount, char __user *, name)
{
return ksys_umount(name, 0);
}
#endif
static bool is_mnt_ns_file(struct dentry *dentry)
{
/* Is this a proxy for a mount namespace? */
return dentry->d_op == &ns_dentry_operations &&
dentry->d_fsdata == &mntns_operations;
}
nsfs: iterate through mount namespaces It is already possible to list mounts in other mount namespaces and to retrieve namespace file descriptors without having to go through procfs by deriving them from pidfds. Augment these abilities by adding the ability to retrieve information about a mount namespace via NS_MNT_GET_INFO. This will return the mount namespace id and the number of mounts currently in the mount namespace. The number of mounts can be used to size the buffer that needs to be used for listmount() and is in general useful without having to actually iterate through all the mounts. The structure is extensible. And add the ability to iterate through all mount namespaces over which the caller holds privilege returning the file descriptor for the next or previous mount namespace. To retrieve a mount namespace the caller must be privileged wrt to it's owning user namespace. This means that PID 1 on the host can list all mounts in all mount namespaces or that a container can list all mounts of its nested containers. Optionally pass a structure for NS_MNT_GET_INFO with NS_MNT_GET_{PREV,NEXT} to retrieve information about the mount namespace in one go. Both ioctls can be implemented for other namespace types easily. Together with recent api additions this means one can iterate through all mounts in all mount namespaces without ever touching procfs. Link: https://lore.kernel.org/r/20240719-work-mount-namespace-v1-5-834113cab0d2@kernel.org Reviewed-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Christian Brauner <brauner@kernel.org>
2024-07-19 11:41:52 +00:00
struct ns_common *from_mnt_ns(struct mnt_namespace *mnt)
{
nsfs: iterate through mount namespaces It is already possible to list mounts in other mount namespaces and to retrieve namespace file descriptors without having to go through procfs by deriving them from pidfds. Augment these abilities by adding the ability to retrieve information about a mount namespace via NS_MNT_GET_INFO. This will return the mount namespace id and the number of mounts currently in the mount namespace. The number of mounts can be used to size the buffer that needs to be used for listmount() and is in general useful without having to actually iterate through all the mounts. The structure is extensible. And add the ability to iterate through all mount namespaces over which the caller holds privilege returning the file descriptor for the next or previous mount namespace. To retrieve a mount namespace the caller must be privileged wrt to it's owning user namespace. This means that PID 1 on the host can list all mounts in all mount namespaces or that a container can list all mounts of its nested containers. Optionally pass a structure for NS_MNT_GET_INFO with NS_MNT_GET_{PREV,NEXT} to retrieve information about the mount namespace in one go. Both ioctls can be implemented for other namespace types easily. Together with recent api additions this means one can iterate through all mounts in all mount namespaces without ever touching procfs. Link: https://lore.kernel.org/r/20240719-work-mount-namespace-v1-5-834113cab0d2@kernel.org Reviewed-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Christian Brauner <brauner@kernel.org>
2024-07-19 11:41:52 +00:00
return &mnt->ns;
}
nsfs: iterate through mount namespaces It is already possible to list mounts in other mount namespaces and to retrieve namespace file descriptors without having to go through procfs by deriving them from pidfds. Augment these abilities by adding the ability to retrieve information about a mount namespace via NS_MNT_GET_INFO. This will return the mount namespace id and the number of mounts currently in the mount namespace. The number of mounts can be used to size the buffer that needs to be used for listmount() and is in general useful without having to actually iterate through all the mounts. The structure is extensible. And add the ability to iterate through all mount namespaces over which the caller holds privilege returning the file descriptor for the next or previous mount namespace. To retrieve a mount namespace the caller must be privileged wrt to it's owning user namespace. This means that PID 1 on the host can list all mounts in all mount namespaces or that a container can list all mounts of its nested containers. Optionally pass a structure for NS_MNT_GET_INFO with NS_MNT_GET_{PREV,NEXT} to retrieve information about the mount namespace in one go. Both ioctls can be implemented for other namespace types easily. Together with recent api additions this means one can iterate through all mounts in all mount namespaces without ever touching procfs. Link: https://lore.kernel.org/r/20240719-work-mount-namespace-v1-5-834113cab0d2@kernel.org Reviewed-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Christian Brauner <brauner@kernel.org>
2024-07-19 11:41:52 +00:00
struct mnt_namespace *__lookup_next_mnt_ns(struct mnt_namespace *mntns, bool previous)
nsproxy: attach to namespaces via pidfds For quite a while we have been thinking about using pidfds to attach to namespaces. This patchset has existed for about a year already but we've wanted to wait to see how the general api would be received and adopted. Now that more and more programs in userspace have started using pidfds for process management it's time to send this one out. This patch makes it possible to use pidfds to attach to the namespaces of another process, i.e. they can be passed as the first argument to the setns() syscall. When only a single namespace type is specified the semantics are equivalent to passing an nsfd. That means setns(nsfd, CLONE_NEWNET) equals setns(pidfd, CLONE_NEWNET). However, when a pidfd is passed, multiple namespace flags can be specified in the second setns() argument and setns() will attach the caller to all the specified namespaces all at once or to none of them. Specifying 0 is not valid together with a pidfd. Here are just two obvious examples: setns(pidfd, CLONE_NEWPID | CLONE_NEWNS | CLONE_NEWNET); setns(pidfd, CLONE_NEWUSER); Allowing to also attach subsets of namespaces supports various use-cases where callers setns to a subset of namespaces to retain privilege, perform an action and then re-attach another subset of namespaces. If the need arises, as Eric suggested, we can extend this patchset to assume even more context than just attaching all namespaces. His suggestion specifically was about assuming the process' root directory when setns(pidfd, 0) or setns(pidfd, SETNS_PIDFD) is specified. For now, just keep it flexible in terms of supporting subsets of namespaces but let's wait until we have users asking for even more context to be assumed. At that point we can add an extension. The obvious example where this is useful is a standard container manager interacting with a running container: pushing and pulling files or directories, injecting mounts, attaching/execing any kind of process, managing network devices all these operations require attaching to all or at least multiple namespaces at the same time. Given that nowadays most containers are spawned with all namespaces enabled we're currently looking at at least 14 syscalls, 7 to open the /proc/<pid>/ns/<ns> nsfds, another 7 to actually perform the namespace switch. With time namespaces we're looking at about 16 syscalls. (We could amortize the first 7 or 8 syscalls for opening the nsfds by stashing them in each container's monitor process but that would mean we need to send around those file descriptors through unix sockets everytime we want to interact with the container or keep on-disk state. Even in scenarios where a caller wants to join a particular namespace in a particular order callers still profit from batching other namespaces. That mostly applies to the user namespace but all container runtimes I found join the user namespace first no matter if it privileges or deprivileges the container similar to how unshare behaves.) With pidfds this becomes a single syscall no matter how many namespaces are supposed to be attached to. A decently designed, large-scale container manager usually isn't the parent of any of the containers it spawns so the containers don't die when it crashes or needs to update or reinitialize. This means that for the manager to interact with containers through pids is inherently racy especially on systems where the maximum pid number is not significicantly bumped. This is even more problematic since we often spawn and manage thousands or ten-thousands of containers. Interacting with a container through a pid thus can become risky quite quickly. Especially since we allow for an administrator to enable advanced features such as syscall interception where we're performing syscalls in lieu of the container. In all of those cases we use pidfds if they are available and we pass them around as stable references. Using them to setns() to the target process' namespaces is as reliable as using nsfds. Either the target process is already dead and we get ESRCH or we manage to attach to its namespaces but we can't accidently attach to another process' namespaces. So pidfds lend themselves to be used with this api. The other main advantage is that with this change the pidfd becomes the only relevant token for most container interactions and it's the only token we need to create and send around. Apart from significiantly reducing the number of syscalls from double digit to single digit which is a decent reason post-spectre/meltdown this also allows to switch to a set of namespaces atomically, i.e. either attaching to all the specified namespaces succeeds or we fail. If we fail we haven't changed a single namespace. There are currently three namespaces that can fail (other than for ENOMEM which really is not very interesting since we then have other problems anyway) for non-trivial reasons, user, mount, and pid namespaces. We can fail to attach to a pid namespace if it is not our current active pid namespace or a descendant of it. We can fail to attach to a user namespace because we are multi-threaded or because our current mount namespace shares filesystem state with other tasks, or because we're trying to setns() to the same user namespace, i.e. the target task has the same user namespace as we do. We can fail to attach to a mount namespace because it shares filesystem state with other tasks or because we fail to lookup the new root for the new mount namespace. In most non-pathological scenarios these issues can be somewhat mitigated. But there are cases where we're half-attached to some namespace and failing to attach to another one. I've talked about some of these problem during the hallway track (something only the pre-COVID-19 generation will remember) of Plumbers in Los Angeles in 2018(?). Even if all these issues could be avoided with super careful userspace coding it would be nicer to have this done in-kernel. Pidfds seem to lend themselves nicely for this. The other neat thing about this is that setns() becomes an actual counterpart to the namespace bits of unshare(). Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com> Reviewed-by: Serge Hallyn <serge@hallyn.com> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Serge Hallyn <serge@hallyn.com> Cc: Jann Horn <jannh@google.com> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Cc: Aleksa Sarai <cyphar@cyphar.com> Link: https://lore.kernel.org/r/20200505140432.181565-3-christian.brauner@ubuntu.com
2020-05-05 14:04:31 +00:00
{
nsfs: iterate through mount namespaces It is already possible to list mounts in other mount namespaces and to retrieve namespace file descriptors without having to go through procfs by deriving them from pidfds. Augment these abilities by adding the ability to retrieve information about a mount namespace via NS_MNT_GET_INFO. This will return the mount namespace id and the number of mounts currently in the mount namespace. The number of mounts can be used to size the buffer that needs to be used for listmount() and is in general useful without having to actually iterate through all the mounts. The structure is extensible. And add the ability to iterate through all mount namespaces over which the caller holds privilege returning the file descriptor for the next or previous mount namespace. To retrieve a mount namespace the caller must be privileged wrt to it's owning user namespace. This means that PID 1 on the host can list all mounts in all mount namespaces or that a container can list all mounts of its nested containers. Optionally pass a structure for NS_MNT_GET_INFO with NS_MNT_GET_{PREV,NEXT} to retrieve information about the mount namespace in one go. Both ioctls can be implemented for other namespace types easily. Together with recent api additions this means one can iterate through all mounts in all mount namespaces without ever touching procfs. Link: https://lore.kernel.org/r/20240719-work-mount-namespace-v1-5-834113cab0d2@kernel.org Reviewed-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Christian Brauner <brauner@kernel.org>
2024-07-19 11:41:52 +00:00
guard(read_lock)(&mnt_ns_tree_lock);
for (;;) {
struct rb_node *node;
if (previous)
node = rb_prev(&mntns->mnt_ns_tree_node);
else
node = rb_next(&mntns->mnt_ns_tree_node);
if (!node)
return ERR_PTR(-ENOENT);
mntns = node_to_mnt_ns(node);
node = &mntns->mnt_ns_tree_node;
if (!ns_capable_noaudit(mntns->user_ns, CAP_SYS_ADMIN))
continue;
/*
* Holding mnt_ns_tree_lock prevents the mount namespace from
* being freed but it may well be on it's deathbed. We want an
* active reference, not just a passive one here as we're
* persisting the mount namespace.
*/
if (!refcount_inc_not_zero(&mntns->ns.count))
continue;
return mntns;
}
nsproxy: attach to namespaces via pidfds For quite a while we have been thinking about using pidfds to attach to namespaces. This patchset has existed for about a year already but we've wanted to wait to see how the general api would be received and adopted. Now that more and more programs in userspace have started using pidfds for process management it's time to send this one out. This patch makes it possible to use pidfds to attach to the namespaces of another process, i.e. they can be passed as the first argument to the setns() syscall. When only a single namespace type is specified the semantics are equivalent to passing an nsfd. That means setns(nsfd, CLONE_NEWNET) equals setns(pidfd, CLONE_NEWNET). However, when a pidfd is passed, multiple namespace flags can be specified in the second setns() argument and setns() will attach the caller to all the specified namespaces all at once or to none of them. Specifying 0 is not valid together with a pidfd. Here are just two obvious examples: setns(pidfd, CLONE_NEWPID | CLONE_NEWNS | CLONE_NEWNET); setns(pidfd, CLONE_NEWUSER); Allowing to also attach subsets of namespaces supports various use-cases where callers setns to a subset of namespaces to retain privilege, perform an action and then re-attach another subset of namespaces. If the need arises, as Eric suggested, we can extend this patchset to assume even more context than just attaching all namespaces. His suggestion specifically was about assuming the process' root directory when setns(pidfd, 0) or setns(pidfd, SETNS_PIDFD) is specified. For now, just keep it flexible in terms of supporting subsets of namespaces but let's wait until we have users asking for even more context to be assumed. At that point we can add an extension. The obvious example where this is useful is a standard container manager interacting with a running container: pushing and pulling files or directories, injecting mounts, attaching/execing any kind of process, managing network devices all these operations require attaching to all or at least multiple namespaces at the same time. Given that nowadays most containers are spawned with all namespaces enabled we're currently looking at at least 14 syscalls, 7 to open the /proc/<pid>/ns/<ns> nsfds, another 7 to actually perform the namespace switch. With time namespaces we're looking at about 16 syscalls. (We could amortize the first 7 or 8 syscalls for opening the nsfds by stashing them in each container's monitor process but that would mean we need to send around those file descriptors through unix sockets everytime we want to interact with the container or keep on-disk state. Even in scenarios where a caller wants to join a particular namespace in a particular order callers still profit from batching other namespaces. That mostly applies to the user namespace but all container runtimes I found join the user namespace first no matter if it privileges or deprivileges the container similar to how unshare behaves.) With pidfds this becomes a single syscall no matter how many namespaces are supposed to be attached to. A decently designed, large-scale container manager usually isn't the parent of any of the containers it spawns so the containers don't die when it crashes or needs to update or reinitialize. This means that for the manager to interact with containers through pids is inherently racy especially on systems where the maximum pid number is not significicantly bumped. This is even more problematic since we often spawn and manage thousands or ten-thousands of containers. Interacting with a container through a pid thus can become risky quite quickly. Especially since we allow for an administrator to enable advanced features such as syscall interception where we're performing syscalls in lieu of the container. In all of those cases we use pidfds if they are available and we pass them around as stable references. Using them to setns() to the target process' namespaces is as reliable as using nsfds. Either the target process is already dead and we get ESRCH or we manage to attach to its namespaces but we can't accidently attach to another process' namespaces. So pidfds lend themselves to be used with this api. The other main advantage is that with this change the pidfd becomes the only relevant token for most container interactions and it's the only token we need to create and send around. Apart from significiantly reducing the number of syscalls from double digit to single digit which is a decent reason post-spectre/meltdown this also allows to switch to a set of namespaces atomically, i.e. either attaching to all the specified namespaces succeeds or we fail. If we fail we haven't changed a single namespace. There are currently three namespaces that can fail (other than for ENOMEM which really is not very interesting since we then have other problems anyway) for non-trivial reasons, user, mount, and pid namespaces. We can fail to attach to a pid namespace if it is not our current active pid namespace or a descendant of it. We can fail to attach to a user namespace because we are multi-threaded or because our current mount namespace shares filesystem state with other tasks, or because we're trying to setns() to the same user namespace, i.e. the target task has the same user namespace as we do. We can fail to attach to a mount namespace because it shares filesystem state with other tasks or because we fail to lookup the new root for the new mount namespace. In most non-pathological scenarios these issues can be somewhat mitigated. But there are cases where we're half-attached to some namespace and failing to attach to another one. I've talked about some of these problem during the hallway track (something only the pre-COVID-19 generation will remember) of Plumbers in Los Angeles in 2018(?). Even if all these issues could be avoided with super careful userspace coding it would be nicer to have this done in-kernel. Pidfds seem to lend themselves nicely for this. The other neat thing about this is that setns() becomes an actual counterpart to the namespace bits of unshare(). Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com> Reviewed-by: Serge Hallyn <serge@hallyn.com> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Serge Hallyn <serge@hallyn.com> Cc: Jann Horn <jannh@google.com> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Cc: Aleksa Sarai <cyphar@cyphar.com> Link: https://lore.kernel.org/r/20200505140432.181565-3-christian.brauner@ubuntu.com
2020-05-05 14:04:31 +00:00
}
static bool mnt_ns_loop(struct dentry *dentry)
{
/* Could bind mounting the mount namespace inode cause a
* mount namespace loop?
*/
struct mnt_namespace *mnt_ns;
if (!is_mnt_ns_file(dentry))
return false;
mnt_ns = to_mnt_ns(get_proc_ns(dentry->d_inode));
return current->nsproxy->mnt_ns->seq >= mnt_ns->seq;
}
struct mount *copy_tree(struct mount *src_root, struct dentry *dentry,
int flag)
{
struct mount *res, *src_parent, *src_root_child, *src_mnt,
*dst_parent, *dst_mnt;
if (!(flag & CL_COPY_UNBINDABLE) && IS_MNT_UNBINDABLE(src_root))
return ERR_PTR(-EINVAL);
if (!(flag & CL_COPY_MNT_NS_FILE) && is_mnt_ns_file(dentry))
return ERR_PTR(-EINVAL);
res = dst_mnt = clone_mnt(src_root, dentry, flag);
if (IS_ERR(dst_mnt))
return dst_mnt;
src_parent = src_root;
dst_mnt->mnt_mountpoint = src_root->mnt_mountpoint;
list_for_each_entry(src_root_child, &src_root->mnt_mounts, mnt_child) {
if (!is_subdir(src_root_child->mnt_mountpoint, dentry))
continue;
for (src_mnt = src_root_child; src_mnt;
src_mnt = next_mnt(src_mnt, src_root_child)) {
if (!(flag & CL_COPY_UNBINDABLE) &&
IS_MNT_UNBINDABLE(src_mnt)) {
if (src_mnt->mnt.mnt_flags & MNT_LOCKED) {
mount: Don't allow copying MNT_UNBINDABLE|MNT_LOCKED mounts Jonathan Calmels from NVIDIA reported that he's able to bypass the mount visibility security check in place in the Linux kernel by using a combination of the unbindable property along with the private mount propagation option to allow a unprivileged user to see a path which was purposefully hidden by the root user. Reproducer: # Hide a path to all users using a tmpfs root@castiana:~# mount -t tmpfs tmpfs /sys/devices/ root@castiana:~# # As an unprivileged user, unshare user namespace and mount namespace stgraber@castiana:~$ unshare -U -m -r # Confirm the path is still not accessible root@castiana:~# ls /sys/devices/ # Make /sys recursively unbindable and private root@castiana:~# mount --make-runbindable /sys root@castiana:~# mount --make-private /sys # Recursively bind-mount the rest of /sys over to /mnnt root@castiana:~# mount --rbind /sys/ /mnt # Access our hidden /sys/device as an unprivileged user root@castiana:~# ls /mnt/devices/ breakpoint cpu cstate_core cstate_pkg i915 intel_pt isa kprobe LNXSYSTM:00 msr pci0000:00 platform pnp0 power software system tracepoint uncore_arb uncore_cbox_0 uncore_cbox_1 uprobe virtual Solve this by teaching copy_tree to fail if a mount turns out to be both unbindable and locked. Cc: stable@vger.kernel.org Fixes: 5ff9d8a65ce8 ("vfs: Lock in place mounts from more privileged users") Reported-by: Jonathan Calmels <jcalmels@nvidia.com> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-10-25 14:04:18 +00:00
/* Both unbindable and locked. */
dst_mnt = ERR_PTR(-EPERM);
mount: Don't allow copying MNT_UNBINDABLE|MNT_LOCKED mounts Jonathan Calmels from NVIDIA reported that he's able to bypass the mount visibility security check in place in the Linux kernel by using a combination of the unbindable property along with the private mount propagation option to allow a unprivileged user to see a path which was purposefully hidden by the root user. Reproducer: # Hide a path to all users using a tmpfs root@castiana:~# mount -t tmpfs tmpfs /sys/devices/ root@castiana:~# # As an unprivileged user, unshare user namespace and mount namespace stgraber@castiana:~$ unshare -U -m -r # Confirm the path is still not accessible root@castiana:~# ls /sys/devices/ # Make /sys recursively unbindable and private root@castiana:~# mount --make-runbindable /sys root@castiana:~# mount --make-private /sys # Recursively bind-mount the rest of /sys over to /mnnt root@castiana:~# mount --rbind /sys/ /mnt # Access our hidden /sys/device as an unprivileged user root@castiana:~# ls /mnt/devices/ breakpoint cpu cstate_core cstate_pkg i915 intel_pt isa kprobe LNXSYSTM:00 msr pci0000:00 platform pnp0 power software system tracepoint uncore_arb uncore_cbox_0 uncore_cbox_1 uprobe virtual Solve this by teaching copy_tree to fail if a mount turns out to be both unbindable and locked. Cc: stable@vger.kernel.org Fixes: 5ff9d8a65ce8 ("vfs: Lock in place mounts from more privileged users") Reported-by: Jonathan Calmels <jcalmels@nvidia.com> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-10-25 14:04:18 +00:00
goto out;
} else {
src_mnt = skip_mnt_tree(src_mnt);
mount: Don't allow copying MNT_UNBINDABLE|MNT_LOCKED mounts Jonathan Calmels from NVIDIA reported that he's able to bypass the mount visibility security check in place in the Linux kernel by using a combination of the unbindable property along with the private mount propagation option to allow a unprivileged user to see a path which was purposefully hidden by the root user. Reproducer: # Hide a path to all users using a tmpfs root@castiana:~# mount -t tmpfs tmpfs /sys/devices/ root@castiana:~# # As an unprivileged user, unshare user namespace and mount namespace stgraber@castiana:~$ unshare -U -m -r # Confirm the path is still not accessible root@castiana:~# ls /sys/devices/ # Make /sys recursively unbindable and private root@castiana:~# mount --make-runbindable /sys root@castiana:~# mount --make-private /sys # Recursively bind-mount the rest of /sys over to /mnnt root@castiana:~# mount --rbind /sys/ /mnt # Access our hidden /sys/device as an unprivileged user root@castiana:~# ls /mnt/devices/ breakpoint cpu cstate_core cstate_pkg i915 intel_pt isa kprobe LNXSYSTM:00 msr pci0000:00 platform pnp0 power software system tracepoint uncore_arb uncore_cbox_0 uncore_cbox_1 uprobe virtual Solve this by teaching copy_tree to fail if a mount turns out to be both unbindable and locked. Cc: stable@vger.kernel.org Fixes: 5ff9d8a65ce8 ("vfs: Lock in place mounts from more privileged users") Reported-by: Jonathan Calmels <jcalmels@nvidia.com> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-10-25 14:04:18 +00:00
continue;
}
}
if (!(flag & CL_COPY_MNT_NS_FILE) &&
is_mnt_ns_file(src_mnt->mnt.mnt_root)) {
src_mnt = skip_mnt_tree(src_mnt);
continue;
}
while (src_parent != src_mnt->mnt_parent) {
src_parent = src_parent->mnt_parent;
dst_mnt = dst_mnt->mnt_parent;
}
src_parent = src_mnt;
dst_parent = dst_mnt;
dst_mnt = clone_mnt(src_mnt, src_mnt->mnt.mnt_root, flag);
if (IS_ERR(dst_mnt))
goto out;
lock_mount_hash();
list_add_tail(&dst_mnt->mnt_list, &res->mnt_list);
attach_mnt(dst_mnt, dst_parent, src_parent->mnt_mp, false);
unlock_mount_hash();
}
}
return res;
out:
if (res) {
lock_mount_hash();
umount_tree(res, UMOUNT_SYNC);
unlock_mount_hash();
}
return dst_mnt;
}
/* Caller should check returned pointer for errors */
struct vfsmount *collect_mounts(const struct path *path)
{
struct mount *tree;
namespace_lock();
if (!check_mnt(real_mount(path->mnt)))
tree = ERR_PTR(-EINVAL);
else
tree = copy_tree(real_mount(path->mnt), path->dentry,
CL_COPY_ALL | CL_PRIVATE);
namespace_unlock();
if (IS_ERR(tree))
return ERR_CAST(tree);
return &tree->mnt;
}
static void free_mnt_ns(struct mnt_namespace *);
static struct mnt_namespace *alloc_mnt_ns(struct user_namespace *, bool);
void dissolve_on_fput(struct vfsmount *mnt)
{
struct mnt_namespace *ns;
namespace_lock();
lock_mount_hash();
ns = real_mount(mnt)->mnt_ns;
if (ns) {
if (is_anon_ns(ns))
umount_tree(real_mount(mnt), UMOUNT_CONNECTED);
else
ns = NULL;
}
unlock_mount_hash();
namespace_unlock();
if (ns)
free_mnt_ns(ns);
}
void drop_collected_mounts(struct vfsmount *mnt)
{
namespace_lock();
lock_mount_hash();
mount: Prevent MNT_DETACH from disconnecting locked mounts Timothy Baldwin <timbaldwin@fastmail.co.uk> wrote: > As per mount_namespaces(7) unprivileged users should not be able to look under mount points: > > Mounts that come as a single unit from more privileged mount are locked > together and may not be separated in a less privileged mount namespace. > > However they can: > > 1. Create a mount namespace. > 2. In the mount namespace open a file descriptor to the parent of a mount point. > 3. Destroy the mount namespace. > 4. Use the file descriptor to look under the mount point. > > I have reproduced this with Linux 4.16.18 and Linux 4.18-rc8. > > The setup: > > $ sudo sysctl kernel.unprivileged_userns_clone=1 > kernel.unprivileged_userns_clone = 1 > $ mkdir -p A/B/Secret > $ sudo mount -t tmpfs hide A/B > > > "Secret" is indeed hidden as expected: > > $ ls -lR A > A: > total 0 > drwxrwxrwt 2 root root 40 Feb 12 21:08 B > > A/B: > total 0 > > > The attack revealing "Secret": > > $ unshare -Umr sh -c "exec unshare -m ls -lR /proc/self/fd/4/ 4<A" > /proc/self/fd/4/: > total 0 > drwxr-xr-x 3 root root 60 Feb 12 21:08 B > > /proc/self/fd/4/B: > total 0 > drwxr-xr-x 2 root root 40 Feb 12 21:08 Secret > > /proc/self/fd/4/B/Secret: > total 0 I tracked this down to put_mnt_ns running passing UMOUNT_SYNC and disconnecting all of the mounts in a mount namespace. Fix this by factoring drop_mounts out of drop_collected_mounts and passing 0 instead of UMOUNT_SYNC. There are two possible behavior differences that result from this. - No longer setting UMOUNT_SYNC will no longer set MNT_SYNC_UMOUNT on the vfsmounts being unmounted. This effects the lazy rcu walk by kicking the walk out of rcu mode and forcing it to be a non-lazy walk. - No longer disconnecting locked mounts will keep some mounts around longer as they stay because the are locked to other mounts. There are only two users of drop_collected mounts: audit_tree.c and put_mnt_ns. In audit_tree.c the mounts are private and there are no rcu lazy walks only calls to iterate_mounts. So the changes should have no effect except for a small timing effect as the connected mounts are disconnected. In put_mnt_ns there may be references from process outside the mount namespace to the mounts. So the mounts remaining connected will be the bug fix that is needed. That rcu walks are allowed to continue appears not to be a problem especially as the rcu walk change was about an implementation detail not about semantics. Cc: stable@vger.kernel.org Fixes: 5ff9d8a65ce8 ("vfs: Lock in place mounts from more privileged users") Reported-by: Timothy Baldwin <timbaldwin@fastmail.co.uk> Tested-by: Timothy Baldwin <timbaldwin@fastmail.co.uk> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-10-25 17:05:11 +00:00
umount_tree(real_mount(mnt), 0);
unlock_mount_hash();
namespace_unlock();
}
fhandle: relax open_by_handle_at() permission checks A current limitation of open_by_handle_at() is that it's currently not possible to use it from within containers at all because we require CAP_DAC_READ_SEARCH in the initial namespace. That's unfortunate because there are scenarios where using open_by_handle_at() from within containers. Two examples: (1) cgroupfs allows to encode cgroups to file handles and reopen them with open_by_handle_at(). (2) Fanotify allows placing filesystem watches they currently aren't usable in containers because the returned file handles cannot be used. Here's a proposal for relaxing the permission check for open_by_handle_at(). (1) Opening file handles when the caller has privileges over the filesystem (1.1) The caller has an unobstructed view of the filesystem. (1.2) The caller has permissions to follow a path to the file handle. This doesn't address the problem of opening a file handle when only a portion of a filesystem is exposed as is common in containers by e.g., bind-mounting a subtree. The proposal to solve this use-case is: (2) Opening file handles when the caller has privileges over a subtree (2.1) The caller is able to reach the file from the provided mount fd. (2.2) The caller has permissions to construct an unobstructed path to the file handle. (2.3) The caller has permissions to follow a path to the file handle. The relaxed permission checks are currently restricted to directory file handles which are what both cgroupfs and fanotify need. Handling disconnected non-directory file handles would lead to a potentially non-deterministic api. If a disconnected non-directory file handle is provided we may fail to decode a valid path that we could use for permission checking. That in itself isn't a problem as we would just return EACCES in that case. However, confusion may arise if a non-disconnected dentry ends up in the cache later and those opening the file handle would suddenly succeed. * It's potentially possible to use timing information (side-channel) to infer whether a given inode exists. I don't think that's particularly problematic. Thanks to Jann for bringing this to my attention. * An unrelated note (IOW, these are thoughts that apply to open_by_handle_at() generically and are unrelated to the changes here): Jann pointed out that we should verify whether deleted files could potentially be reopened through open_by_handle_at(). I don't think that's possible though. Another potential thing to check is whether open_by_handle_at() could be abused to open internal stuff like memfds or gpu stuff. I don't think so but I haven't had the time to completely verify this. This dates back to discussions Amir and I had quite some time ago and thanks to him for providing a lot of details around the export code and related patches! Link: https://lore.kernel.org/r/20240524-vfs-open_by_handle_at-v1-1-3d4b7d22736b@kernel.org Reviewed-by: Amir Goldstein <amir73il@gmail.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Christian Brauner <brauner@kernel.org>
2024-05-24 10:19:39 +00:00
bool has_locked_children(struct mount *mnt, struct dentry *dentry)
{
struct mount *child;
list_for_each_entry(child, &mnt->mnt_mounts, mnt_child) {
if (!is_subdir(child->mnt_mountpoint, dentry))
continue;
if (child->mnt.mnt_flags & MNT_LOCKED)
return true;
}
return false;
}
/**
* clone_private_mount - create a private clone of a path
* @path: path to clone
*
* This creates a new vfsmount, which will be the clone of @path. The new mount
* will not be attached anywhere in the namespace and will be private (i.e.
* changes to the originating mount won't be propagated into this).
*
* Release with mntput().
*/
struct vfsmount *clone_private_mount(const struct path *path)
{
struct mount *old_mnt = real_mount(path->mnt);
struct mount *new_mnt;
down_read(&namespace_sem);
if (IS_MNT_UNBINDABLE(old_mnt))
goto invalid;
if (!check_mnt(old_mnt))
goto invalid;
if (has_locked_children(old_mnt, path->dentry))
goto invalid;
new_mnt = clone_mnt(old_mnt, path->dentry, CL_PRIVATE);
up_read(&namespace_sem);
if (IS_ERR(new_mnt))
return ERR_CAST(new_mnt);
/* Longterm mount to be removed by kern_unmount*() */
new_mnt->mnt_ns = MNT_NS_INTERNAL;
return &new_mnt->mnt;
invalid:
up_read(&namespace_sem);
return ERR_PTR(-EINVAL);
}
EXPORT_SYMBOL_GPL(clone_private_mount);
int iterate_mounts(int (*f)(struct vfsmount *, void *), void *arg,
struct vfsmount *root)
{
struct mount *mnt;
int res = f(root, arg);
if (res)
return res;
list_for_each_entry(mnt, &real_mount(root)->mnt_list, mnt_list) {
res = f(&mnt->mnt, arg);
if (res)
return res;
}
return 0;
}
static void lock_mnt_tree(struct mount *mnt)
{
struct mount *p;
for (p = mnt; p; p = next_mnt(p, mnt)) {
int flags = p->mnt.mnt_flags;
/* Don't allow unprivileged users to change mount flags */
flags |= MNT_LOCK_ATIME;
if (flags & MNT_READONLY)
flags |= MNT_LOCK_READONLY;
if (flags & MNT_NODEV)
flags |= MNT_LOCK_NODEV;
if (flags & MNT_NOSUID)
flags |= MNT_LOCK_NOSUID;
if (flags & MNT_NOEXEC)
flags |= MNT_LOCK_NOEXEC;
/* Don't allow unprivileged users to reveal what is under a mount */
if (list_empty(&p->mnt_expire))
flags |= MNT_LOCKED;
p->mnt.mnt_flags = flags;
}
}
static void cleanup_group_ids(struct mount *mnt, struct mount *end)
{
struct mount *p;
for (p = mnt; p != end; p = next_mnt(p, mnt)) {
if (p->mnt_group_id && !IS_MNT_SHARED(p))
mnt_release_group_id(p);
}
}
static int invent_group_ids(struct mount *mnt, bool recurse)
{
struct mount *p;
for (p = mnt; p; p = recurse ? next_mnt(p, mnt) : NULL) {
if (!p->mnt_group_id && !IS_MNT_SHARED(p)) {
int err = mnt_alloc_group_id(p);
if (err) {
cleanup_group_ids(mnt, p);
return err;
}
}
}
return 0;
}
mnt: Add a per mount namespace limit on the number of mounts CAI Qian <caiqian@redhat.com> pointed out that the semantics of shared subtrees make it possible to create an exponentially increasing number of mounts in a mount namespace. mkdir /tmp/1 /tmp/2 mount --make-rshared / for i in $(seq 1 20) ; do mount --bind /tmp/1 /tmp/2 ; done Will create create 2^20 or 1048576 mounts, which is a practical problem as some people have managed to hit this by accident. As such CVE-2016-6213 was assigned. Ian Kent <raven@themaw.net> described the situation for autofs users as follows: > The number of mounts for direct mount maps is usually not very large because of > the way they are implemented, large direct mount maps can have performance > problems. There can be anywhere from a few (likely case a few hundred) to less > than 10000, plus mounts that have been triggered and not yet expired. > > Indirect mounts have one autofs mount at the root plus the number of mounts that > have been triggered and not yet expired. > > The number of autofs indirect map entries can range from a few to the common > case of several thousand and in rare cases up to between 30000 and 50000. I've > not heard of people with maps larger than 50000 entries. > > The larger the number of map entries the greater the possibility for a large > number of active mounts so it's not hard to expect cases of a 1000 or somewhat > more active mounts. So I am setting the default number of mounts allowed per mount namespace at 100,000. This is more than enough for any use case I know of, but small enough to quickly stop an exponential increase in mounts. Which should be perfect to catch misconfigurations and malfunctioning programs. For anyone who needs a higher limit this can be changed by writing to the new /proc/sys/fs/mount-max sysctl. Tested-by: CAI Qian <caiqian@redhat.com> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2016-09-28 05:27:17 +00:00
int count_mounts(struct mnt_namespace *ns, struct mount *mnt)
{
unsigned int max = READ_ONCE(sysctl_mount_max);
unsigned int mounts = 0;
mnt: Add a per mount namespace limit on the number of mounts CAI Qian <caiqian@redhat.com> pointed out that the semantics of shared subtrees make it possible to create an exponentially increasing number of mounts in a mount namespace. mkdir /tmp/1 /tmp/2 mount --make-rshared / for i in $(seq 1 20) ; do mount --bind /tmp/1 /tmp/2 ; done Will create create 2^20 or 1048576 mounts, which is a practical problem as some people have managed to hit this by accident. As such CVE-2016-6213 was assigned. Ian Kent <raven@themaw.net> described the situation for autofs users as follows: > The number of mounts for direct mount maps is usually not very large because of > the way they are implemented, large direct mount maps can have performance > problems. There can be anywhere from a few (likely case a few hundred) to less > than 10000, plus mounts that have been triggered and not yet expired. > > Indirect mounts have one autofs mount at the root plus the number of mounts that > have been triggered and not yet expired. > > The number of autofs indirect map entries can range from a few to the common > case of several thousand and in rare cases up to between 30000 and 50000. I've > not heard of people with maps larger than 50000 entries. > > The larger the number of map entries the greater the possibility for a large > number of active mounts so it's not hard to expect cases of a 1000 or somewhat > more active mounts. So I am setting the default number of mounts allowed per mount namespace at 100,000. This is more than enough for any use case I know of, but small enough to quickly stop an exponential increase in mounts. Which should be perfect to catch misconfigurations and malfunctioning programs. For anyone who needs a higher limit this can be changed by writing to the new /proc/sys/fs/mount-max sysctl. Tested-by: CAI Qian <caiqian@redhat.com> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2016-09-28 05:27:17 +00:00
struct mount *p;
if (ns->nr_mounts >= max)
return -ENOSPC;
max -= ns->nr_mounts;
if (ns->pending_mounts >= max)
return -ENOSPC;
max -= ns->pending_mounts;
mnt: Add a per mount namespace limit on the number of mounts CAI Qian <caiqian@redhat.com> pointed out that the semantics of shared subtrees make it possible to create an exponentially increasing number of mounts in a mount namespace. mkdir /tmp/1 /tmp/2 mount --make-rshared / for i in $(seq 1 20) ; do mount --bind /tmp/1 /tmp/2 ; done Will create create 2^20 or 1048576 mounts, which is a practical problem as some people have managed to hit this by accident. As such CVE-2016-6213 was assigned. Ian Kent <raven@themaw.net> described the situation for autofs users as follows: > The number of mounts for direct mount maps is usually not very large because of > the way they are implemented, large direct mount maps can have performance > problems. There can be anywhere from a few (likely case a few hundred) to less > than 10000, plus mounts that have been triggered and not yet expired. > > Indirect mounts have one autofs mount at the root plus the number of mounts that > have been triggered and not yet expired. > > The number of autofs indirect map entries can range from a few to the common > case of several thousand and in rare cases up to between 30000 and 50000. I've > not heard of people with maps larger than 50000 entries. > > The larger the number of map entries the greater the possibility for a large > number of active mounts so it's not hard to expect cases of a 1000 or somewhat > more active mounts. So I am setting the default number of mounts allowed per mount namespace at 100,000. This is more than enough for any use case I know of, but small enough to quickly stop an exponential increase in mounts. Which should be perfect to catch misconfigurations and malfunctioning programs. For anyone who needs a higher limit this can be changed by writing to the new /proc/sys/fs/mount-max sysctl. Tested-by: CAI Qian <caiqian@redhat.com> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2016-09-28 05:27:17 +00:00
for (p = mnt; p; p = next_mnt(p, mnt))
mounts++;
if (mounts > max)
mnt: Add a per mount namespace limit on the number of mounts CAI Qian <caiqian@redhat.com> pointed out that the semantics of shared subtrees make it possible to create an exponentially increasing number of mounts in a mount namespace. mkdir /tmp/1 /tmp/2 mount --make-rshared / for i in $(seq 1 20) ; do mount --bind /tmp/1 /tmp/2 ; done Will create create 2^20 or 1048576 mounts, which is a practical problem as some people have managed to hit this by accident. As such CVE-2016-6213 was assigned. Ian Kent <raven@themaw.net> described the situation for autofs users as follows: > The number of mounts for direct mount maps is usually not very large because of > the way they are implemented, large direct mount maps can have performance > problems. There can be anywhere from a few (likely case a few hundred) to less > than 10000, plus mounts that have been triggered and not yet expired. > > Indirect mounts have one autofs mount at the root plus the number of mounts that > have been triggered and not yet expired. > > The number of autofs indirect map entries can range from a few to the common > case of several thousand and in rare cases up to between 30000 and 50000. I've > not heard of people with maps larger than 50000 entries. > > The larger the number of map entries the greater the possibility for a large > number of active mounts so it's not hard to expect cases of a 1000 or somewhat > more active mounts. So I am setting the default number of mounts allowed per mount namespace at 100,000. This is more than enough for any use case I know of, but small enough to quickly stop an exponential increase in mounts. Which should be perfect to catch misconfigurations and malfunctioning programs. For anyone who needs a higher limit this can be changed by writing to the new /proc/sys/fs/mount-max sysctl. Tested-by: CAI Qian <caiqian@redhat.com> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2016-09-28 05:27:17 +00:00
return -ENOSPC;
ns->pending_mounts += mounts;
mnt: Add a per mount namespace limit on the number of mounts CAI Qian <caiqian@redhat.com> pointed out that the semantics of shared subtrees make it possible to create an exponentially increasing number of mounts in a mount namespace. mkdir /tmp/1 /tmp/2 mount --make-rshared / for i in $(seq 1 20) ; do mount --bind /tmp/1 /tmp/2 ; done Will create create 2^20 or 1048576 mounts, which is a practical problem as some people have managed to hit this by accident. As such CVE-2016-6213 was assigned. Ian Kent <raven@themaw.net> described the situation for autofs users as follows: > The number of mounts for direct mount maps is usually not very large because of > the way they are implemented, large direct mount maps can have performance > problems. There can be anywhere from a few (likely case a few hundred) to less > than 10000, plus mounts that have been triggered and not yet expired. > > Indirect mounts have one autofs mount at the root plus the number of mounts that > have been triggered and not yet expired. > > The number of autofs indirect map entries can range from a few to the common > case of several thousand and in rare cases up to between 30000 and 50000. I've > not heard of people with maps larger than 50000 entries. > > The larger the number of map entries the greater the possibility for a large > number of active mounts so it's not hard to expect cases of a 1000 or somewhat > more active mounts. So I am setting the default number of mounts allowed per mount namespace at 100,000. This is more than enough for any use case I know of, but small enough to quickly stop an exponential increase in mounts. Which should be perfect to catch misconfigurations and malfunctioning programs. For anyone who needs a higher limit this can be changed by writing to the new /proc/sys/fs/mount-max sysctl. Tested-by: CAI Qian <caiqian@redhat.com> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2016-09-28 05:27:17 +00:00
return 0;
}
fs: allow to mount beneath top mount Various distributions are adding or are in the process of adding support for system extensions and in the future configuration extensions through various tools. A more detailed explanation on system and configuration extensions can be found on the manpage which is listed below at [1]. System extension images may – dynamically at runtime — extend the /usr/ and /opt/ directory hierarchies with additional files. This is particularly useful on immutable system images where a /usr/ and/or /opt/ hierarchy residing on a read-only file system shall be extended temporarily at runtime without making any persistent modifications. When one or more system extension images are activated, their /usr/ and /opt/ hierarchies are combined via overlayfs with the same hierarchies of the host OS, and the host /usr/ and /opt/ overmounted with it ("merging"). When they are deactivated, the mount point is disassembled — again revealing the unmodified original host version of the hierarchy ("unmerging"). Merging thus makes the extension's resources suddenly appear below the /usr/ and /opt/ hierarchies as if they were included in the base OS image itself. Unmerging makes them disappear again, leaving in place only the files that were shipped with the base OS image itself. System configuration images are similar but operate on directories containing system or service configuration. On nearly all modern distributions mount propagation plays a crucial role and the rootfs of the OS is a shared mount in a peer group (usually with peer group id 1): TARGET SOURCE FSTYPE PROPAGATION MNT_ID PARENT_ID / / ext4 shared:1 29 1 On such systems all services and containers run in a separate mount namespace and are pivot_root()ed into their rootfs. A separate mount namespace is almost always used as it is the minimal isolation mechanism services have. But usually they are even much more isolated up to the point where they almost become indistinguishable from containers. Mount propagation again plays a crucial role here. The rootfs of all these services is a slave mount to the peer group of the host rootfs. This is done so the service will receive mount propagation events from the host when certain files or directories are updated. In addition, the rootfs of each service, container, and sandbox is also a shared mount in its separate peer group: TARGET SOURCE FSTYPE PROPAGATION MNT_ID PARENT_ID / / ext4 shared:24 master:1 71 47 For people not too familiar with mount propagation, the master:1 means that this is a slave mount to peer group 1. Which as one can see is the host rootfs as indicated by shared:1 above. The shared:24 indicates that the service rootfs is a shared mount in a separate peer group with peer group id 24. A service may run other services. Such nested services will also have a rootfs mount that is a slave to the peer group of the outer service rootfs mount. For containers things are just slighly different. A container's rootfs isn't a slave to the service's or host rootfs' peer group. The rootfs mount of a container is simply a shared mount in its own peer group: TARGET SOURCE FSTYPE PROPAGATION MNT_ID PARENT_ID /home/ubuntu/debian-tree / ext4 shared:99 61 60 So whereas services are isolated OS components a container is treated like a separate world and mount propagation into it is restricted to a single well known mount that is a slave to the peer group of the shared mount /run on the host: TARGET SOURCE FSTYPE PROPAGATION MNT_ID PARENT_ID /propagate/debian-tree /run/host/incoming tmpfs master:5 71 68 Here, the master:5 indicates that this mount is a slave to the peer group with peer group id 5. This allows to propagate mounts into the container and served as a workaround for not being able to insert mounts into mount namespaces directly. But the new mount api does support inserting mounts directly. For the interested reader the blogpost in [2] might be worth reading where I explain the old and the new approach to inserting mounts into mount namespaces. Containers of course, can themselves be run as services. They often run full systems themselves which means they again run services and containers with the exact same propagation settings explained above. The whole system is designed so that it can be easily updated, including all services in various fine-grained ways without having to enter every single service's mount namespace which would be prohibitively expensive. The mount propagation layout has been carefully chosen so it is possible to propagate updates for system extensions and configurations from the host into all services. The simplest model to update the whole system is to mount on top of /usr, /opt, or /etc on the host. The new mount on /usr, /opt, or /etc will then propagate into every service. This works cleanly the first time. However, when the system is updated multiple times it becomes necessary to unmount the first update on /opt, /usr, /etc and then propagate the new update. But this means, there's an interval where the old base system is accessible. This has to be avoided to protect against downgrade attacks. The vfs already exposes a mechanism to userspace whereby mounts can be mounted beneath an existing mount. Such mounts are internally referred to as "tucked". The patch series exposes the ability to mount beneath a top mount through the new MOVE_MOUNT_BENEATH flag for the move_mount() system call. This allows userspace to seamlessly upgrade mounts. After this series the only thing that will have changed is that mounting beneath an existing mount can be done explicitly instead of just implicitly. Today, there are two scenarios where a mount can be mounted beneath an existing mount instead of on top of it: (1) When a service or container is started in a new mount namespace and pivot_root()s into its new rootfs. The way this is done is by mounting the new rootfs beneath the old rootfs: fd_newroot = open("/var/lib/machines/fedora", ...); fd_oldroot = open("/", ...); fchdir(fd_newroot); pivot_root(".", "."); After the pivot_root(".", ".") call the new rootfs is mounted beneath the old rootfs which can then be unmounted to reveal the underlying mount: fchdir(fd_oldroot); umount2(".", MNT_DETACH); Since pivot_root() moves the caller into a new rootfs no mounts must be propagated out of the new rootfs as a consequence of the pivot_root() call. Thus, the mounts cannot be shared. (2) When a mount is propagated to a mount that already has another mount mounted on the same dentry. The easiest example for this is to create a new mount namespace. The following commands will create a mount namespace where the rootfs mount / will be a slave to the peer group of the host rootfs / mount's peer group. IOW, it will receive propagation from the host: mount --make-shared / unshare --mount --propagation=slave Now a new mount on the /mnt dentry in that mount namespace is created. (As it can be confusing it should be spelled out that the tmpfs mount on the /mnt dentry that was just created doesn't propagate back to the host because the rootfs mount / of the mount namespace isn't a peer of the host rootfs.): mount -t tmpfs tmpfs /mnt TARGET SOURCE FSTYPE PROPAGATION └─/mnt tmpfs tmpfs Now another terminal in the host mount namespace can observe that the mount indeed hasn't propagated back to into the host mount namespace. A new mount can now be created on top of the /mnt dentry with the rootfs mount / as its parent: mount --bind /opt /mnt TARGET SOURCE FSTYPE PROPAGATION └─/mnt /dev/sda2[/opt] ext4 shared:1 The mount namespace that was created earlier can now observe that the bind mount created on the host has propagated into it: TARGET SOURCE FSTYPE PROPAGATION └─/mnt /dev/sda2[/opt] ext4 master:1 └─/mnt tmpfs tmpfs But instead of having been mounted on top of the tmpfs mount at the /mnt dentry the /opt mount has been mounted on top of the rootfs mount at the /mnt dentry. And the tmpfs mount has been remounted on top of the propagated /opt mount at the /opt dentry. So in other words, the propagated mount has been mounted beneath the preexisting mount in that mount namespace. Mount namespaces make this easy to illustrate but it's also easy to mount beneath an existing mount in the same mount namespace (The following example assumes a shared rootfs mount / with peer group id 1): mount --bind /opt /opt TARGET SOURCE FSTYPE MNT_ID PARENT_ID PROPAGATION └─/opt /dev/sda2[/opt] ext4 188 29 shared:1 If another mount is mounted on top of the /opt mount at the /opt dentry: mount --bind /tmp /opt The following clunky mount tree will result: TARGET SOURCE FSTYPE MNT_ID PARENT_ID PROPAGATION └─/opt /dev/sda2[/tmp] ext4 405 29 shared:1 └─/opt /dev/sda2[/opt] ext4 188 405 shared:1 └─/opt /dev/sda2[/tmp] ext4 404 188 shared:1 The /tmp mount is mounted beneath the /opt mount and another copy is mounted on top of the /opt mount. This happens because the rootfs / and the /opt mount are shared mounts in the same peer group. When the new /tmp mount is supposed to be mounted at the /opt dentry then the /tmp mount first propagates to the root mount at the /opt dentry. But there already is the /opt mount mounted at the /opt dentry. So the old /opt mount at the /opt dentry will be mounted on top of the new /tmp mount at the /tmp dentry, i.e. @opt->mnt_parent is @tmp and @opt->mnt_mountpoint is /tmp (Note that @opt->mnt_root is /opt which is what shows up as /opt under SOURCE). So again, a mount will be mounted beneath a preexisting mount. (Fwiw, a few iterations of mount --bind /opt /opt in a loop on a shared rootfs is a good example of what could be referred to as mount explosion.) The main point is that such mounts allows userspace to umount a top mount and reveal an underlying mount. So for example, umounting the tmpfs mount on /mnt that was created in example (1) using mount namespaces reveals the /opt mount which was mounted beneath it. In (2) where a mount was mounted beneath the top mount in the same mount namespace unmounting the top mount would unmount both the top mount and the mount beneath. In the process the original mount would be remounted on top of the rootfs mount / at the /opt dentry again. This again, is a result of mount propagation only this time it's umount propagation. However, this can be avoided by simply making the parent mount / of the @opt mount a private or slave mount. Then the top mount and the original mount can be unmounted to reveal the mount beneath. These two examples are fairly arcane and are merely added to make it clear how mount propagation has effects on current and future features. More common use-cases will just be things like: mount -t btrfs /dev/sdA /mnt mount -t xfs /dev/sdB --beneath /mnt umount /mnt after which we'll have updated from a btrfs filesystem to a xfs filesystem without ever revealing the underlying mountpoint. The crux is that the proposed mechanism already exists and that it is so powerful as to cover cases where mounts are supposed to be updated with new versions. Crucially, it offers an important flexibility. Namely that updates to a system may either be forced or can be delayed and the umount of the top mount be left to a service if it is a cooperative one. This adds a new flag to move_mount() that allows to explicitly move a beneath the top mount adhering to the following semantics: * Mounts cannot be mounted beneath the rootfs. This restriction encompasses the rootfs but also chroots via chroot() and pivot_root(). To mount a mount beneath the rootfs or a chroot, pivot_root() can be used as illustrated above. * The source mount must be a private mount to force the kernel to allocate a new, unused peer group id. This isn't a required restriction but a voluntary one. It avoids repeating a semantical quirk that already exists today. If bind mounts which already have a peer group id are inserted into mount trees that have the same peer group id this can cause a lot of mount propagation events to be generated (For example, consider running mount --bind /opt /opt in a loop where the parent mount is a shared mount.). * Avoid getting rid of the top mount in the kernel. Cooperative services need to be able to unmount the top mount themselves. This also avoids a good deal of additional complexity. The umount would have to be propagated which would be another rather expensive operation. So namespace_lock() and lock_mount_hash() would potentially have to be held for a long time for both a mount and umount propagation. That should be avoided. * The path to mount beneath must be mounted and attached. * The top mount and its parent must be in the caller's mount namespace and the caller must be able to mount in that mount namespace. * The caller must be able to unmount the top mount to prove that they could reveal the underlying mount. * The propagation tree is calculated based on the destination mount's parent mount and the destination mount's mountpoint on the parent mount. Of course, if the parent of the destination mount and the destination mount are shared mounts in the same peer group and the mountpoint of the new mount to be mounted is a subdir of their ->mnt_root then both will receive a mount of /opt. That's probably easier to understand with an example. Assuming a standard shared rootfs /: mount --bind /opt /opt mount --bind /tmp /opt will cause the same mount tree as: mount --bind /opt /opt mount --beneath /tmp /opt because both / and /opt are shared mounts/peers in the same peer group and the /opt dentry is a subdirectory of both the parent's and the child's ->mnt_root. If a mount tree like that is created it almost always is an accident or abuse of mount propagation. Realistically what most people probably mean in this scenarios is: mount --bind /opt /opt mount --make-private /opt mount --make-shared /opt This forces the allocation of a new separate peer group for the /opt mount. Aferwards a mount --bind or mount --beneath actually makes sense as the / and /opt mount belong to different peer groups. Before that it's likely just confusion about what the user wanted to achieve. * Refuse MOVE_MOUNT_BENEATH if: (1) the @mnt_from has been overmounted in between path resolution and acquiring @namespace_sem when locking @mnt_to. This avoids the proliferation of shadow mounts. (2) if @to_mnt is moved to a different mountpoint while acquiring @namespace_sem to lock @to_mnt. (3) if @to_mnt is unmounted while acquiring @namespace_sem to lock @to_mnt. (4) if the parent of the target mount propagates to the target mount at the same mountpoint. This would mean mounting @mnt_from on @mnt_to->mnt_parent and then propagating a copy @c of @mnt_from onto @mnt_to. This defeats the whole purpose of mounting @mnt_from beneath @mnt_to. (5) if the parent mount @mnt_to->mnt_parent propagates to @mnt_from at the same mountpoint. If @mnt_to->mnt_parent propagates to @mnt_from this would mean propagating a copy @c of @mnt_from on top of @mnt_from. Afterwards @mnt_from would be mounted on top of @mnt_to->mnt_parent and @mnt_to would be unmounted from @mnt->mnt_parent and remounted on @mnt_from. But since @c is already mounted on @mnt_from, @mnt_to would ultimately be remounted on top of @c. Afterwards, @mnt_from would be covered by a copy @c of @mnt_from and @c would be covered by @mnt_from itself. This defeats the whole purpose of mounting @mnt_from beneath @mnt_to. Cases (1) to (3) are required as they deal with races that would cause bugs or unexpected behavior for users. Cases (4) and (5) refuse semantical quirks that would not be a bug but would cause weird mount trees to be created. While they can already be created via other means (mount --bind /opt /opt x n) there's no reason to repeat past mistakes in new features. Link: https://man7.org/linux/man-pages/man8/systemd-sysext.8.html [1] Link: https://brauner.io/2023/02/28/mounting-into-mount-namespaces.html [2] Link: https://github.com/flatcar/sysext-bakery Link: https://fedoraproject.org/wiki/Changes/Unified_Kernel_Support_Phase_1 Link: https://fedoraproject.org/wiki/Changes/Unified_Kernel_Support_Phase_2 Link: https://github.com/systemd/systemd/pull/26013 Reviewed-by: Seth Forshee (DigitalOcean) <sforshee@kernel.org> Message-Id: <20230202-fs-move-mount-replace-v4-4-98f3d80d7eaa@kernel.org> Signed-off-by: Christian Brauner <brauner@kernel.org>
2023-05-03 11:18:42 +00:00
enum mnt_tree_flags_t {
MNT_TREE_MOVE = BIT(0),
MNT_TREE_BENEATH = BIT(1),
};
/**
* attach_recursive_mnt - attach a source mount tree
* @source_mnt: mount tree to be attached
* @top_mnt: mount that @source_mnt will be mounted on or mounted beneath
* @dest_mp: the mountpoint @source_mnt will be mounted at
* @flags: modify how @source_mnt is supposed to be attached
*
* NOTE: in the table below explains the semantics when a source mount
* of a given type is attached to a destination mount of a given type.
* ---------------------------------------------------------------------------
* | BIND MOUNT OPERATION |
* |**************************************************************************
* | source-->| shared | private | slave | unbindable |
* | dest | | | | |
* | | | | | | |
* | v | | | | |
* |**************************************************************************
* | shared | shared (++) | shared (+) | shared(+++)| invalid |
* | | | | | |
* |non-shared| shared (+) | private | slave (*) | invalid |
* ***************************************************************************
* A bind operation clones the source mount and mounts the clone on the
* destination mount.
*
* (++) the cloned mount is propagated to all the mounts in the propagation
* tree of the destination mount and the cloned mount is added to
* the peer group of the source mount.
* (+) the cloned mount is created under the destination mount and is marked
* as shared. The cloned mount is added to the peer group of the source
* mount.
* (+++) the mount is propagated to all the mounts in the propagation tree
* of the destination mount and the cloned mount is made slave
* of the same master as that of the source mount. The cloned mount
* is marked as 'shared and slave'.
* (*) the cloned mount is made a slave of the same master as that of the
* source mount.
*
* ---------------------------------------------------------------------------
* | MOVE MOUNT OPERATION |
* |**************************************************************************
* | source-->| shared | private | slave | unbindable |
* | dest | | | | |
* | | | | | | |
* | v | | | | |
* |**************************************************************************
* | shared | shared (+) | shared (+) | shared(+++) | invalid |
* | | | | | |
* |non-shared| shared (+*) | private | slave (*) | unbindable |
* ***************************************************************************
*
* (+) the mount is moved to the destination. And is then propagated to
* all the mounts in the propagation tree of the destination mount.
* (+*) the mount is moved to the destination.
* (+++) the mount is moved to the destination and is then propagated to
* all the mounts belonging to the destination mount's propagation tree.
* the mount is marked as 'shared and slave'.
* (*) the mount continues to be a slave at the new location.
*
* if the source mount is a tree, the operations explained above is
* applied to each mount in the tree.
* Must be called without spinlocks held, since this function can sleep
* in allocations.
fs: allow to mount beneath top mount Various distributions are adding or are in the process of adding support for system extensions and in the future configuration extensions through various tools. A more detailed explanation on system and configuration extensions can be found on the manpage which is listed below at [1]. System extension images may – dynamically at runtime — extend the /usr/ and /opt/ directory hierarchies with additional files. This is particularly useful on immutable system images where a /usr/ and/or /opt/ hierarchy residing on a read-only file system shall be extended temporarily at runtime without making any persistent modifications. When one or more system extension images are activated, their /usr/ and /opt/ hierarchies are combined via overlayfs with the same hierarchies of the host OS, and the host /usr/ and /opt/ overmounted with it ("merging"). When they are deactivated, the mount point is disassembled — again revealing the unmodified original host version of the hierarchy ("unmerging"). Merging thus makes the extension's resources suddenly appear below the /usr/ and /opt/ hierarchies as if they were included in the base OS image itself. Unmerging makes them disappear again, leaving in place only the files that were shipped with the base OS image itself. System configuration images are similar but operate on directories containing system or service configuration. On nearly all modern distributions mount propagation plays a crucial role and the rootfs of the OS is a shared mount in a peer group (usually with peer group id 1): TARGET SOURCE FSTYPE PROPAGATION MNT_ID PARENT_ID / / ext4 shared:1 29 1 On such systems all services and containers run in a separate mount namespace and are pivot_root()ed into their rootfs. A separate mount namespace is almost always used as it is the minimal isolation mechanism services have. But usually they are even much more isolated up to the point where they almost become indistinguishable from containers. Mount propagation again plays a crucial role here. The rootfs of all these services is a slave mount to the peer group of the host rootfs. This is done so the service will receive mount propagation events from the host when certain files or directories are updated. In addition, the rootfs of each service, container, and sandbox is also a shared mount in its separate peer group: TARGET SOURCE FSTYPE PROPAGATION MNT_ID PARENT_ID / / ext4 shared:24 master:1 71 47 For people not too familiar with mount propagation, the master:1 means that this is a slave mount to peer group 1. Which as one can see is the host rootfs as indicated by shared:1 above. The shared:24 indicates that the service rootfs is a shared mount in a separate peer group with peer group id 24. A service may run other services. Such nested services will also have a rootfs mount that is a slave to the peer group of the outer service rootfs mount. For containers things are just slighly different. A container's rootfs isn't a slave to the service's or host rootfs' peer group. The rootfs mount of a container is simply a shared mount in its own peer group: TARGET SOURCE FSTYPE PROPAGATION MNT_ID PARENT_ID /home/ubuntu/debian-tree / ext4 shared:99 61 60 So whereas services are isolated OS components a container is treated like a separate world and mount propagation into it is restricted to a single well known mount that is a slave to the peer group of the shared mount /run on the host: TARGET SOURCE FSTYPE PROPAGATION MNT_ID PARENT_ID /propagate/debian-tree /run/host/incoming tmpfs master:5 71 68 Here, the master:5 indicates that this mount is a slave to the peer group with peer group id 5. This allows to propagate mounts into the container and served as a workaround for not being able to insert mounts into mount namespaces directly. But the new mount api does support inserting mounts directly. For the interested reader the blogpost in [2] might be worth reading where I explain the old and the new approach to inserting mounts into mount namespaces. Containers of course, can themselves be run as services. They often run full systems themselves which means they again run services and containers with the exact same propagation settings explained above. The whole system is designed so that it can be easily updated, including all services in various fine-grained ways without having to enter every single service's mount namespace which would be prohibitively expensive. The mount propagation layout has been carefully chosen so it is possible to propagate updates for system extensions and configurations from the host into all services. The simplest model to update the whole system is to mount on top of /usr, /opt, or /etc on the host. The new mount on /usr, /opt, or /etc will then propagate into every service. This works cleanly the first time. However, when the system is updated multiple times it becomes necessary to unmount the first update on /opt, /usr, /etc and then propagate the new update. But this means, there's an interval where the old base system is accessible. This has to be avoided to protect against downgrade attacks. The vfs already exposes a mechanism to userspace whereby mounts can be mounted beneath an existing mount. Such mounts are internally referred to as "tucked". The patch series exposes the ability to mount beneath a top mount through the new MOVE_MOUNT_BENEATH flag for the move_mount() system call. This allows userspace to seamlessly upgrade mounts. After this series the only thing that will have changed is that mounting beneath an existing mount can be done explicitly instead of just implicitly. Today, there are two scenarios where a mount can be mounted beneath an existing mount instead of on top of it: (1) When a service or container is started in a new mount namespace and pivot_root()s into its new rootfs. The way this is done is by mounting the new rootfs beneath the old rootfs: fd_newroot = open("/var/lib/machines/fedora", ...); fd_oldroot = open("/", ...); fchdir(fd_newroot); pivot_root(".", "."); After the pivot_root(".", ".") call the new rootfs is mounted beneath the old rootfs which can then be unmounted to reveal the underlying mount: fchdir(fd_oldroot); umount2(".", MNT_DETACH); Since pivot_root() moves the caller into a new rootfs no mounts must be propagated out of the new rootfs as a consequence of the pivot_root() call. Thus, the mounts cannot be shared. (2) When a mount is propagated to a mount that already has another mount mounted on the same dentry. The easiest example for this is to create a new mount namespace. The following commands will create a mount namespace where the rootfs mount / will be a slave to the peer group of the host rootfs / mount's peer group. IOW, it will receive propagation from the host: mount --make-shared / unshare --mount --propagation=slave Now a new mount on the /mnt dentry in that mount namespace is created. (As it can be confusing it should be spelled out that the tmpfs mount on the /mnt dentry that was just created doesn't propagate back to the host because the rootfs mount / of the mount namespace isn't a peer of the host rootfs.): mount -t tmpfs tmpfs /mnt TARGET SOURCE FSTYPE PROPAGATION └─/mnt tmpfs tmpfs Now another terminal in the host mount namespace can observe that the mount indeed hasn't propagated back to into the host mount namespace. A new mount can now be created on top of the /mnt dentry with the rootfs mount / as its parent: mount --bind /opt /mnt TARGET SOURCE FSTYPE PROPAGATION └─/mnt /dev/sda2[/opt] ext4 shared:1 The mount namespace that was created earlier can now observe that the bind mount created on the host has propagated into it: TARGET SOURCE FSTYPE PROPAGATION └─/mnt /dev/sda2[/opt] ext4 master:1 └─/mnt tmpfs tmpfs But instead of having been mounted on top of the tmpfs mount at the /mnt dentry the /opt mount has been mounted on top of the rootfs mount at the /mnt dentry. And the tmpfs mount has been remounted on top of the propagated /opt mount at the /opt dentry. So in other words, the propagated mount has been mounted beneath the preexisting mount in that mount namespace. Mount namespaces make this easy to illustrate but it's also easy to mount beneath an existing mount in the same mount namespace (The following example assumes a shared rootfs mount / with peer group id 1): mount --bind /opt /opt TARGET SOURCE FSTYPE MNT_ID PARENT_ID PROPAGATION └─/opt /dev/sda2[/opt] ext4 188 29 shared:1 If another mount is mounted on top of the /opt mount at the /opt dentry: mount --bind /tmp /opt The following clunky mount tree will result: TARGET SOURCE FSTYPE MNT_ID PARENT_ID PROPAGATION └─/opt /dev/sda2[/tmp] ext4 405 29 shared:1 └─/opt /dev/sda2[/opt] ext4 188 405 shared:1 └─/opt /dev/sda2[/tmp] ext4 404 188 shared:1 The /tmp mount is mounted beneath the /opt mount and another copy is mounted on top of the /opt mount. This happens because the rootfs / and the /opt mount are shared mounts in the same peer group. When the new /tmp mount is supposed to be mounted at the /opt dentry then the /tmp mount first propagates to the root mount at the /opt dentry. But there already is the /opt mount mounted at the /opt dentry. So the old /opt mount at the /opt dentry will be mounted on top of the new /tmp mount at the /tmp dentry, i.e. @opt->mnt_parent is @tmp and @opt->mnt_mountpoint is /tmp (Note that @opt->mnt_root is /opt which is what shows up as /opt under SOURCE). So again, a mount will be mounted beneath a preexisting mount. (Fwiw, a few iterations of mount --bind /opt /opt in a loop on a shared rootfs is a good example of what could be referred to as mount explosion.) The main point is that such mounts allows userspace to umount a top mount and reveal an underlying mount. So for example, umounting the tmpfs mount on /mnt that was created in example (1) using mount namespaces reveals the /opt mount which was mounted beneath it. In (2) where a mount was mounted beneath the top mount in the same mount namespace unmounting the top mount would unmount both the top mount and the mount beneath. In the process the original mount would be remounted on top of the rootfs mount / at the /opt dentry again. This again, is a result of mount propagation only this time it's umount propagation. However, this can be avoided by simply making the parent mount / of the @opt mount a private or slave mount. Then the top mount and the original mount can be unmounted to reveal the mount beneath. These two examples are fairly arcane and are merely added to make it clear how mount propagation has effects on current and future features. More common use-cases will just be things like: mount -t btrfs /dev/sdA /mnt mount -t xfs /dev/sdB --beneath /mnt umount /mnt after which we'll have updated from a btrfs filesystem to a xfs filesystem without ever revealing the underlying mountpoint. The crux is that the proposed mechanism already exists and that it is so powerful as to cover cases where mounts are supposed to be updated with new versions. Crucially, it offers an important flexibility. Namely that updates to a system may either be forced or can be delayed and the umount of the top mount be left to a service if it is a cooperative one. This adds a new flag to move_mount() that allows to explicitly move a beneath the top mount adhering to the following semantics: * Mounts cannot be mounted beneath the rootfs. This restriction encompasses the rootfs but also chroots via chroot() and pivot_root(). To mount a mount beneath the rootfs or a chroot, pivot_root() can be used as illustrated above. * The source mount must be a private mount to force the kernel to allocate a new, unused peer group id. This isn't a required restriction but a voluntary one. It avoids repeating a semantical quirk that already exists today. If bind mounts which already have a peer group id are inserted into mount trees that have the same peer group id this can cause a lot of mount propagation events to be generated (For example, consider running mount --bind /opt /opt in a loop where the parent mount is a shared mount.). * Avoid getting rid of the top mount in the kernel. Cooperative services need to be able to unmount the top mount themselves. This also avoids a good deal of additional complexity. The umount would have to be propagated which would be another rather expensive operation. So namespace_lock() and lock_mount_hash() would potentially have to be held for a long time for both a mount and umount propagation. That should be avoided. * The path to mount beneath must be mounted and attached. * The top mount and its parent must be in the caller's mount namespace and the caller must be able to mount in that mount namespace. * The caller must be able to unmount the top mount to prove that they could reveal the underlying mount. * The propagation tree is calculated based on the destination mount's parent mount and the destination mount's mountpoint on the parent mount. Of course, if the parent of the destination mount and the destination mount are shared mounts in the same peer group and the mountpoint of the new mount to be mounted is a subdir of their ->mnt_root then both will receive a mount of /opt. That's probably easier to understand with an example. Assuming a standard shared rootfs /: mount --bind /opt /opt mount --bind /tmp /opt will cause the same mount tree as: mount --bind /opt /opt mount --beneath /tmp /opt because both / and /opt are shared mounts/peers in the same peer group and the /opt dentry is a subdirectory of both the parent's and the child's ->mnt_root. If a mount tree like that is created it almost always is an accident or abuse of mount propagation. Realistically what most people probably mean in this scenarios is: mount --bind /opt /opt mount --make-private /opt mount --make-shared /opt This forces the allocation of a new separate peer group for the /opt mount. Aferwards a mount --bind or mount --beneath actually makes sense as the / and /opt mount belong to different peer groups. Before that it's likely just confusion about what the user wanted to achieve. * Refuse MOVE_MOUNT_BENEATH if: (1) the @mnt_from has been overmounted in between path resolution and acquiring @namespace_sem when locking @mnt_to. This avoids the proliferation of shadow mounts. (2) if @to_mnt is moved to a different mountpoint while acquiring @namespace_sem to lock @to_mnt. (3) if @to_mnt is unmounted while acquiring @namespace_sem to lock @to_mnt. (4) if the parent of the target mount propagates to the target mount at the same mountpoint. This would mean mounting @mnt_from on @mnt_to->mnt_parent and then propagating a copy @c of @mnt_from onto @mnt_to. This defeats the whole purpose of mounting @mnt_from beneath @mnt_to. (5) if the parent mount @mnt_to->mnt_parent propagates to @mnt_from at the same mountpoint. If @mnt_to->mnt_parent propagates to @mnt_from this would mean propagating a copy @c of @mnt_from on top of @mnt_from. Afterwards @mnt_from would be mounted on top of @mnt_to->mnt_parent and @mnt_to would be unmounted from @mnt->mnt_parent and remounted on @mnt_from. But since @c is already mounted on @mnt_from, @mnt_to would ultimately be remounted on top of @c. Afterwards, @mnt_from would be covered by a copy @c of @mnt_from and @c would be covered by @mnt_from itself. This defeats the whole purpose of mounting @mnt_from beneath @mnt_to. Cases (1) to (3) are required as they deal with races that would cause bugs or unexpected behavior for users. Cases (4) and (5) refuse semantical quirks that would not be a bug but would cause weird mount trees to be created. While they can already be created via other means (mount --bind /opt /opt x n) there's no reason to repeat past mistakes in new features. Link: https://man7.org/linux/man-pages/man8/systemd-sysext.8.html [1] Link: https://brauner.io/2023/02/28/mounting-into-mount-namespaces.html [2] Link: https://github.com/flatcar/sysext-bakery Link: https://fedoraproject.org/wiki/Changes/Unified_Kernel_Support_Phase_1 Link: https://fedoraproject.org/wiki/Changes/Unified_Kernel_Support_Phase_2 Link: https://github.com/systemd/systemd/pull/26013 Reviewed-by: Seth Forshee (DigitalOcean) <sforshee@kernel.org> Message-Id: <20230202-fs-move-mount-replace-v4-4-98f3d80d7eaa@kernel.org> Signed-off-by: Christian Brauner <brauner@kernel.org>
2023-05-03 11:18:42 +00:00
*
* Context: The function expects namespace_lock() to be held.
* Return: If @source_mnt was successfully attached 0 is returned.
* Otherwise a negative error code is returned.
*/
static int attach_recursive_mnt(struct mount *source_mnt,
fs: allow to mount beneath top mount Various distributions are adding or are in the process of adding support for system extensions and in the future configuration extensions through various tools. A more detailed explanation on system and configuration extensions can be found on the manpage which is listed below at [1]. System extension images may – dynamically at runtime — extend the /usr/ and /opt/ directory hierarchies with additional files. This is particularly useful on immutable system images where a /usr/ and/or /opt/ hierarchy residing on a read-only file system shall be extended temporarily at runtime without making any persistent modifications. When one or more system extension images are activated, their /usr/ and /opt/ hierarchies are combined via overlayfs with the same hierarchies of the host OS, and the host /usr/ and /opt/ overmounted with it ("merging"). When they are deactivated, the mount point is disassembled — again revealing the unmodified original host version of the hierarchy ("unmerging"). Merging thus makes the extension's resources suddenly appear below the /usr/ and /opt/ hierarchies as if they were included in the base OS image itself. Unmerging makes them disappear again, leaving in place only the files that were shipped with the base OS image itself. System configuration images are similar but operate on directories containing system or service configuration. On nearly all modern distributions mount propagation plays a crucial role and the rootfs of the OS is a shared mount in a peer group (usually with peer group id 1): TARGET SOURCE FSTYPE PROPAGATION MNT_ID PARENT_ID / / ext4 shared:1 29 1 On such systems all services and containers run in a separate mount namespace and are pivot_root()ed into their rootfs. A separate mount namespace is almost always used as it is the minimal isolation mechanism services have. But usually they are even much more isolated up to the point where they almost become indistinguishable from containers. Mount propagation again plays a crucial role here. The rootfs of all these services is a slave mount to the peer group of the host rootfs. This is done so the service will receive mount propagation events from the host when certain files or directories are updated. In addition, the rootfs of each service, container, and sandbox is also a shared mount in its separate peer group: TARGET SOURCE FSTYPE PROPAGATION MNT_ID PARENT_ID / / ext4 shared:24 master:1 71 47 For people not too familiar with mount propagation, the master:1 means that this is a slave mount to peer group 1. Which as one can see is the host rootfs as indicated by shared:1 above. The shared:24 indicates that the service rootfs is a shared mount in a separate peer group with peer group id 24. A service may run other services. Such nested services will also have a rootfs mount that is a slave to the peer group of the outer service rootfs mount. For containers things are just slighly different. A container's rootfs isn't a slave to the service's or host rootfs' peer group. The rootfs mount of a container is simply a shared mount in its own peer group: TARGET SOURCE FSTYPE PROPAGATION MNT_ID PARENT_ID /home/ubuntu/debian-tree / ext4 shared:99 61 60 So whereas services are isolated OS components a container is treated like a separate world and mount propagation into it is restricted to a single well known mount that is a slave to the peer group of the shared mount /run on the host: TARGET SOURCE FSTYPE PROPAGATION MNT_ID PARENT_ID /propagate/debian-tree /run/host/incoming tmpfs master:5 71 68 Here, the master:5 indicates that this mount is a slave to the peer group with peer group id 5. This allows to propagate mounts into the container and served as a workaround for not being able to insert mounts into mount namespaces directly. But the new mount api does support inserting mounts directly. For the interested reader the blogpost in [2] might be worth reading where I explain the old and the new approach to inserting mounts into mount namespaces. Containers of course, can themselves be run as services. They often run full systems themselves which means they again run services and containers with the exact same propagation settings explained above. The whole system is designed so that it can be easily updated, including all services in various fine-grained ways without having to enter every single service's mount namespace which would be prohibitively expensive. The mount propagation layout has been carefully chosen so it is possible to propagate updates for system extensions and configurations from the host into all services. The simplest model to update the whole system is to mount on top of /usr, /opt, or /etc on the host. The new mount on /usr, /opt, or /etc will then propagate into every service. This works cleanly the first time. However, when the system is updated multiple times it becomes necessary to unmount the first update on /opt, /usr, /etc and then propagate the new update. But this means, there's an interval where the old base system is accessible. This has to be avoided to protect against downgrade attacks. The vfs already exposes a mechanism to userspace whereby mounts can be mounted beneath an existing mount. Such mounts are internally referred to as "tucked". The patch series exposes the ability to mount beneath a top mount through the new MOVE_MOUNT_BENEATH flag for the move_mount() system call. This allows userspace to seamlessly upgrade mounts. After this series the only thing that will have changed is that mounting beneath an existing mount can be done explicitly instead of just implicitly. Today, there are two scenarios where a mount can be mounted beneath an existing mount instead of on top of it: (1) When a service or container is started in a new mount namespace and pivot_root()s into its new rootfs. The way this is done is by mounting the new rootfs beneath the old rootfs: fd_newroot = open("/var/lib/machines/fedora", ...); fd_oldroot = open("/", ...); fchdir(fd_newroot); pivot_root(".", "."); After the pivot_root(".", ".") call the new rootfs is mounted beneath the old rootfs which can then be unmounted to reveal the underlying mount: fchdir(fd_oldroot); umount2(".", MNT_DETACH); Since pivot_root() moves the caller into a new rootfs no mounts must be propagated out of the new rootfs as a consequence of the pivot_root() call. Thus, the mounts cannot be shared. (2) When a mount is propagated to a mount that already has another mount mounted on the same dentry. The easiest example for this is to create a new mount namespace. The following commands will create a mount namespace where the rootfs mount / will be a slave to the peer group of the host rootfs / mount's peer group. IOW, it will receive propagation from the host: mount --make-shared / unshare --mount --propagation=slave Now a new mount on the /mnt dentry in that mount namespace is created. (As it can be confusing it should be spelled out that the tmpfs mount on the /mnt dentry that was just created doesn't propagate back to the host because the rootfs mount / of the mount namespace isn't a peer of the host rootfs.): mount -t tmpfs tmpfs /mnt TARGET SOURCE FSTYPE PROPAGATION └─/mnt tmpfs tmpfs Now another terminal in the host mount namespace can observe that the mount indeed hasn't propagated back to into the host mount namespace. A new mount can now be created on top of the /mnt dentry with the rootfs mount / as its parent: mount --bind /opt /mnt TARGET SOURCE FSTYPE PROPAGATION └─/mnt /dev/sda2[/opt] ext4 shared:1 The mount namespace that was created earlier can now observe that the bind mount created on the host has propagated into it: TARGET SOURCE FSTYPE PROPAGATION └─/mnt /dev/sda2[/opt] ext4 master:1 └─/mnt tmpfs tmpfs But instead of having been mounted on top of the tmpfs mount at the /mnt dentry the /opt mount has been mounted on top of the rootfs mount at the /mnt dentry. And the tmpfs mount has been remounted on top of the propagated /opt mount at the /opt dentry. So in other words, the propagated mount has been mounted beneath the preexisting mount in that mount namespace. Mount namespaces make this easy to illustrate but it's also easy to mount beneath an existing mount in the same mount namespace (The following example assumes a shared rootfs mount / with peer group id 1): mount --bind /opt /opt TARGET SOURCE FSTYPE MNT_ID PARENT_ID PROPAGATION └─/opt /dev/sda2[/opt] ext4 188 29 shared:1 If another mount is mounted on top of the /opt mount at the /opt dentry: mount --bind /tmp /opt The following clunky mount tree will result: TARGET SOURCE FSTYPE MNT_ID PARENT_ID PROPAGATION └─/opt /dev/sda2[/tmp] ext4 405 29 shared:1 └─/opt /dev/sda2[/opt] ext4 188 405 shared:1 └─/opt /dev/sda2[/tmp] ext4 404 188 shared:1 The /tmp mount is mounted beneath the /opt mount and another copy is mounted on top of the /opt mount. This happens because the rootfs / and the /opt mount are shared mounts in the same peer group. When the new /tmp mount is supposed to be mounted at the /opt dentry then the /tmp mount first propagates to the root mount at the /opt dentry. But there already is the /opt mount mounted at the /opt dentry. So the old /opt mount at the /opt dentry will be mounted on top of the new /tmp mount at the /tmp dentry, i.e. @opt->mnt_parent is @tmp and @opt->mnt_mountpoint is /tmp (Note that @opt->mnt_root is /opt which is what shows up as /opt under SOURCE). So again, a mount will be mounted beneath a preexisting mount. (Fwiw, a few iterations of mount --bind /opt /opt in a loop on a shared rootfs is a good example of what could be referred to as mount explosion.) The main point is that such mounts allows userspace to umount a top mount and reveal an underlying mount. So for example, umounting the tmpfs mount on /mnt that was created in example (1) using mount namespaces reveals the /opt mount which was mounted beneath it. In (2) where a mount was mounted beneath the top mount in the same mount namespace unmounting the top mount would unmount both the top mount and the mount beneath. In the process the original mount would be remounted on top of the rootfs mount / at the /opt dentry again. This again, is a result of mount propagation only this time it's umount propagation. However, this can be avoided by simply making the parent mount / of the @opt mount a private or slave mount. Then the top mount and the original mount can be unmounted to reveal the mount beneath. These two examples are fairly arcane and are merely added to make it clear how mount propagation has effects on current and future features. More common use-cases will just be things like: mount -t btrfs /dev/sdA /mnt mount -t xfs /dev/sdB --beneath /mnt umount /mnt after which we'll have updated from a btrfs filesystem to a xfs filesystem without ever revealing the underlying mountpoint. The crux is that the proposed mechanism already exists and that it is so powerful as to cover cases where mounts are supposed to be updated with new versions. Crucially, it offers an important flexibility. Namely that updates to a system may either be forced or can be delayed and the umount of the top mount be left to a service if it is a cooperative one. This adds a new flag to move_mount() that allows to explicitly move a beneath the top mount adhering to the following semantics: * Mounts cannot be mounted beneath the rootfs. This restriction encompasses the rootfs but also chroots via chroot() and pivot_root(). To mount a mount beneath the rootfs or a chroot, pivot_root() can be used as illustrated above. * The source mount must be a private mount to force the kernel to allocate a new, unused peer group id. This isn't a required restriction but a voluntary one. It avoids repeating a semantical quirk that already exists today. If bind mounts which already have a peer group id are inserted into mount trees that have the same peer group id this can cause a lot of mount propagation events to be generated (For example, consider running mount --bind /opt /opt in a loop where the parent mount is a shared mount.). * Avoid getting rid of the top mount in the kernel. Cooperative services need to be able to unmount the top mount themselves. This also avoids a good deal of additional complexity. The umount would have to be propagated which would be another rather expensive operation. So namespace_lock() and lock_mount_hash() would potentially have to be held for a long time for both a mount and umount propagation. That should be avoided. * The path to mount beneath must be mounted and attached. * The top mount and its parent must be in the caller's mount namespace and the caller must be able to mount in that mount namespace. * The caller must be able to unmount the top mount to prove that they could reveal the underlying mount. * The propagation tree is calculated based on the destination mount's parent mount and the destination mount's mountpoint on the parent mount. Of course, if the parent of the destination mount and the destination mount are shared mounts in the same peer group and the mountpoint of the new mount to be mounted is a subdir of their ->mnt_root then both will receive a mount of /opt. That's probably easier to understand with an example. Assuming a standard shared rootfs /: mount --bind /opt /opt mount --bind /tmp /opt will cause the same mount tree as: mount --bind /opt /opt mount --beneath /tmp /opt because both / and /opt are shared mounts/peers in the same peer group and the /opt dentry is a subdirectory of both the parent's and the child's ->mnt_root. If a mount tree like that is created it almost always is an accident or abuse of mount propagation. Realistically what most people probably mean in this scenarios is: mount --bind /opt /opt mount --make-private /opt mount --make-shared /opt This forces the allocation of a new separate peer group for the /opt mount. Aferwards a mount --bind or mount --beneath actually makes sense as the / and /opt mount belong to different peer groups. Before that it's likely just confusion about what the user wanted to achieve. * Refuse MOVE_MOUNT_BENEATH if: (1) the @mnt_from has been overmounted in between path resolution and acquiring @namespace_sem when locking @mnt_to. This avoids the proliferation of shadow mounts. (2) if @to_mnt is moved to a different mountpoint while acquiring @namespace_sem to lock @to_mnt. (3) if @to_mnt is unmounted while acquiring @namespace_sem to lock @to_mnt. (4) if the parent of the target mount propagates to the target mount at the same mountpoint. This would mean mounting @mnt_from on @mnt_to->mnt_parent and then propagating a copy @c of @mnt_from onto @mnt_to. This defeats the whole purpose of mounting @mnt_from beneath @mnt_to. (5) if the parent mount @mnt_to->mnt_parent propagates to @mnt_from at the same mountpoint. If @mnt_to->mnt_parent propagates to @mnt_from this would mean propagating a copy @c of @mnt_from on top of @mnt_from. Afterwards @mnt_from would be mounted on top of @mnt_to->mnt_parent and @mnt_to would be unmounted from @mnt->mnt_parent and remounted on @mnt_from. But since @c is already mounted on @mnt_from, @mnt_to would ultimately be remounted on top of @c. Afterwards, @mnt_from would be covered by a copy @c of @mnt_from and @c would be covered by @mnt_from itself. This defeats the whole purpose of mounting @mnt_from beneath @mnt_to. Cases (1) to (3) are required as they deal with races that would cause bugs or unexpected behavior for users. Cases (4) and (5) refuse semantical quirks that would not be a bug but would cause weird mount trees to be created. While they can already be created via other means (mount --bind /opt /opt x n) there's no reason to repeat past mistakes in new features. Link: https://man7.org/linux/man-pages/man8/systemd-sysext.8.html [1] Link: https://brauner.io/2023/02/28/mounting-into-mount-namespaces.html [2] Link: https://github.com/flatcar/sysext-bakery Link: https://fedoraproject.org/wiki/Changes/Unified_Kernel_Support_Phase_1 Link: https://fedoraproject.org/wiki/Changes/Unified_Kernel_Support_Phase_2 Link: https://github.com/systemd/systemd/pull/26013 Reviewed-by: Seth Forshee (DigitalOcean) <sforshee@kernel.org> Message-Id: <20230202-fs-move-mount-replace-v4-4-98f3d80d7eaa@kernel.org> Signed-off-by: Christian Brauner <brauner@kernel.org>
2023-05-03 11:18:42 +00:00
struct mount *top_mnt,
struct mountpoint *dest_mp,
enum mnt_tree_flags_t flags)
{
struct user_namespace *user_ns = current->nsproxy->mnt_ns->user_ns;
HLIST_HEAD(tree_list);
fs: allow to mount beneath top mount Various distributions are adding or are in the process of adding support for system extensions and in the future configuration extensions through various tools. A more detailed explanation on system and configuration extensions can be found on the manpage which is listed below at [1]. System extension images may – dynamically at runtime — extend the /usr/ and /opt/ directory hierarchies with additional files. This is particularly useful on immutable system images where a /usr/ and/or /opt/ hierarchy residing on a read-only file system shall be extended temporarily at runtime without making any persistent modifications. When one or more system extension images are activated, their /usr/ and /opt/ hierarchies are combined via overlayfs with the same hierarchies of the host OS, and the host /usr/ and /opt/ overmounted with it ("merging"). When they are deactivated, the mount point is disassembled — again revealing the unmodified original host version of the hierarchy ("unmerging"). Merging thus makes the extension's resources suddenly appear below the /usr/ and /opt/ hierarchies as if they were included in the base OS image itself. Unmerging makes them disappear again, leaving in place only the files that were shipped with the base OS image itself. System configuration images are similar but operate on directories containing system or service configuration. On nearly all modern distributions mount propagation plays a crucial role and the rootfs of the OS is a shared mount in a peer group (usually with peer group id 1): TARGET SOURCE FSTYPE PROPAGATION MNT_ID PARENT_ID / / ext4 shared:1 29 1 On such systems all services and containers run in a separate mount namespace and are pivot_root()ed into their rootfs. A separate mount namespace is almost always used as it is the minimal isolation mechanism services have. But usually they are even much more isolated up to the point where they almost become indistinguishable from containers. Mount propagation again plays a crucial role here. The rootfs of all these services is a slave mount to the peer group of the host rootfs. This is done so the service will receive mount propagation events from the host when certain files or directories are updated. In addition, the rootfs of each service, container, and sandbox is also a shared mount in its separate peer group: TARGET SOURCE FSTYPE PROPAGATION MNT_ID PARENT_ID / / ext4 shared:24 master:1 71 47 For people not too familiar with mount propagation, the master:1 means that this is a slave mount to peer group 1. Which as one can see is the host rootfs as indicated by shared:1 above. The shared:24 indicates that the service rootfs is a shared mount in a separate peer group with peer group id 24. A service may run other services. Such nested services will also have a rootfs mount that is a slave to the peer group of the outer service rootfs mount. For containers things are just slighly different. A container's rootfs isn't a slave to the service's or host rootfs' peer group. The rootfs mount of a container is simply a shared mount in its own peer group: TARGET SOURCE FSTYPE PROPAGATION MNT_ID PARENT_ID /home/ubuntu/debian-tree / ext4 shared:99 61 60 So whereas services are isolated OS components a container is treated like a separate world and mount propagation into it is restricted to a single well known mount that is a slave to the peer group of the shared mount /run on the host: TARGET SOURCE FSTYPE PROPAGATION MNT_ID PARENT_ID /propagate/debian-tree /run/host/incoming tmpfs master:5 71 68 Here, the master:5 indicates that this mount is a slave to the peer group with peer group id 5. This allows to propagate mounts into the container and served as a workaround for not being able to insert mounts into mount namespaces directly. But the new mount api does support inserting mounts directly. For the interested reader the blogpost in [2] might be worth reading where I explain the old and the new approach to inserting mounts into mount namespaces. Containers of course, can themselves be run as services. They often run full systems themselves which means they again run services and containers with the exact same propagation settings explained above. The whole system is designed so that it can be easily updated, including all services in various fine-grained ways without having to enter every single service's mount namespace which would be prohibitively expensive. The mount propagation layout has been carefully chosen so it is possible to propagate updates for system extensions and configurations from the host into all services. The simplest model to update the whole system is to mount on top of /usr, /opt, or /etc on the host. The new mount on /usr, /opt, or /etc will then propagate into every service. This works cleanly the first time. However, when the system is updated multiple times it becomes necessary to unmount the first update on /opt, /usr, /etc and then propagate the new update. But this means, there's an interval where the old base system is accessible. This has to be avoided to protect against downgrade attacks. The vfs already exposes a mechanism to userspace whereby mounts can be mounted beneath an existing mount. Such mounts are internally referred to as "tucked". The patch series exposes the ability to mount beneath a top mount through the new MOVE_MOUNT_BENEATH flag for the move_mount() system call. This allows userspace to seamlessly upgrade mounts. After this series the only thing that will have changed is that mounting beneath an existing mount can be done explicitly instead of just implicitly. Today, there are two scenarios where a mount can be mounted beneath an existing mount instead of on top of it: (1) When a service or container is started in a new mount namespace and pivot_root()s into its new rootfs. The way this is done is by mounting the new rootfs beneath the old rootfs: fd_newroot = open("/var/lib/machines/fedora", ...); fd_oldroot = open("/", ...); fchdir(fd_newroot); pivot_root(".", "."); After the pivot_root(".", ".") call the new rootfs is mounted beneath the old rootfs which can then be unmounted to reveal the underlying mount: fchdir(fd_oldroot); umount2(".", MNT_DETACH); Since pivot_root() moves the caller into a new rootfs no mounts must be propagated out of the new rootfs as a consequence of the pivot_root() call. Thus, the mounts cannot be shared. (2) When a mount is propagated to a mount that already has another mount mounted on the same dentry. The easiest example for this is to create a new mount namespace. The following commands will create a mount namespace where the rootfs mount / will be a slave to the peer group of the host rootfs / mount's peer group. IOW, it will receive propagation from the host: mount --make-shared / unshare --mount --propagation=slave Now a new mount on the /mnt dentry in that mount namespace is created. (As it can be confusing it should be spelled out that the tmpfs mount on the /mnt dentry that was just created doesn't propagate back to the host because the rootfs mount / of the mount namespace isn't a peer of the host rootfs.): mount -t tmpfs tmpfs /mnt TARGET SOURCE FSTYPE PROPAGATION └─/mnt tmpfs tmpfs Now another terminal in the host mount namespace can observe that the mount indeed hasn't propagated back to into the host mount namespace. A new mount can now be created on top of the /mnt dentry with the rootfs mount / as its parent: mount --bind /opt /mnt TARGET SOURCE FSTYPE PROPAGATION └─/mnt /dev/sda2[/opt] ext4 shared:1 The mount namespace that was created earlier can now observe that the bind mount created on the host has propagated into it: TARGET SOURCE FSTYPE PROPAGATION └─/mnt /dev/sda2[/opt] ext4 master:1 └─/mnt tmpfs tmpfs But instead of having been mounted on top of the tmpfs mount at the /mnt dentry the /opt mount has been mounted on top of the rootfs mount at the /mnt dentry. And the tmpfs mount has been remounted on top of the propagated /opt mount at the /opt dentry. So in other words, the propagated mount has been mounted beneath the preexisting mount in that mount namespace. Mount namespaces make this easy to illustrate but it's also easy to mount beneath an existing mount in the same mount namespace (The following example assumes a shared rootfs mount / with peer group id 1): mount --bind /opt /opt TARGET SOURCE FSTYPE MNT_ID PARENT_ID PROPAGATION └─/opt /dev/sda2[/opt] ext4 188 29 shared:1 If another mount is mounted on top of the /opt mount at the /opt dentry: mount --bind /tmp /opt The following clunky mount tree will result: TARGET SOURCE FSTYPE MNT_ID PARENT_ID PROPAGATION └─/opt /dev/sda2[/tmp] ext4 405 29 shared:1 └─/opt /dev/sda2[/opt] ext4 188 405 shared:1 └─/opt /dev/sda2[/tmp] ext4 404 188 shared:1 The /tmp mount is mounted beneath the /opt mount and another copy is mounted on top of the /opt mount. This happens because the rootfs / and the /opt mount are shared mounts in the same peer group. When the new /tmp mount is supposed to be mounted at the /opt dentry then the /tmp mount first propagates to the root mount at the /opt dentry. But there already is the /opt mount mounted at the /opt dentry. So the old /opt mount at the /opt dentry will be mounted on top of the new /tmp mount at the /tmp dentry, i.e. @opt->mnt_parent is @tmp and @opt->mnt_mountpoint is /tmp (Note that @opt->mnt_root is /opt which is what shows up as /opt under SOURCE). So again, a mount will be mounted beneath a preexisting mount. (Fwiw, a few iterations of mount --bind /opt /opt in a loop on a shared rootfs is a good example of what could be referred to as mount explosion.) The main point is that such mounts allows userspace to umount a top mount and reveal an underlying mount. So for example, umounting the tmpfs mount on /mnt that was created in example (1) using mount namespaces reveals the /opt mount which was mounted beneath it. In (2) where a mount was mounted beneath the top mount in the same mount namespace unmounting the top mount would unmount both the top mount and the mount beneath. In the process the original mount would be remounted on top of the rootfs mount / at the /opt dentry again. This again, is a result of mount propagation only this time it's umount propagation. However, this can be avoided by simply making the parent mount / of the @opt mount a private or slave mount. Then the top mount and the original mount can be unmounted to reveal the mount beneath. These two examples are fairly arcane and are merely added to make it clear how mount propagation has effects on current and future features. More common use-cases will just be things like: mount -t btrfs /dev/sdA /mnt mount -t xfs /dev/sdB --beneath /mnt umount /mnt after which we'll have updated from a btrfs filesystem to a xfs filesystem without ever revealing the underlying mountpoint. The crux is that the proposed mechanism already exists and that it is so powerful as to cover cases where mounts are supposed to be updated with new versions. Crucially, it offers an important flexibility. Namely that updates to a system may either be forced or can be delayed and the umount of the top mount be left to a service if it is a cooperative one. This adds a new flag to move_mount() that allows to explicitly move a beneath the top mount adhering to the following semantics: * Mounts cannot be mounted beneath the rootfs. This restriction encompasses the rootfs but also chroots via chroot() and pivot_root(). To mount a mount beneath the rootfs or a chroot, pivot_root() can be used as illustrated above. * The source mount must be a private mount to force the kernel to allocate a new, unused peer group id. This isn't a required restriction but a voluntary one. It avoids repeating a semantical quirk that already exists today. If bind mounts which already have a peer group id are inserted into mount trees that have the same peer group id this can cause a lot of mount propagation events to be generated (For example, consider running mount --bind /opt /opt in a loop where the parent mount is a shared mount.). * Avoid getting rid of the top mount in the kernel. Cooperative services need to be able to unmount the top mount themselves. This also avoids a good deal of additional complexity. The umount would have to be propagated which would be another rather expensive operation. So namespace_lock() and lock_mount_hash() would potentially have to be held for a long time for both a mount and umount propagation. That should be avoided. * The path to mount beneath must be mounted and attached. * The top mount and its parent must be in the caller's mount namespace and the caller must be able to mount in that mount namespace. * The caller must be able to unmount the top mount to prove that they could reveal the underlying mount. * The propagation tree is calculated based on the destination mount's parent mount and the destination mount's mountpoint on the parent mount. Of course, if the parent of the destination mount and the destination mount are shared mounts in the same peer group and the mountpoint of the new mount to be mounted is a subdir of their ->mnt_root then both will receive a mount of /opt. That's probably easier to understand with an example. Assuming a standard shared rootfs /: mount --bind /opt /opt mount --bind /tmp /opt will cause the same mount tree as: mount --bind /opt /opt mount --beneath /tmp /opt because both / and /opt are shared mounts/peers in the same peer group and the /opt dentry is a subdirectory of both the parent's and the child's ->mnt_root. If a mount tree like that is created it almost always is an accident or abuse of mount propagation. Realistically what most people probably mean in this scenarios is: mount --bind /opt /opt mount --make-private /opt mount --make-shared /opt This forces the allocation of a new separate peer group for the /opt mount. Aferwards a mount --bind or mount --beneath actually makes sense as the / and /opt mount belong to different peer groups. Before that it's likely just confusion about what the user wanted to achieve. * Refuse MOVE_MOUNT_BENEATH if: (1) the @mnt_from has been overmounted in between path resolution and acquiring @namespace_sem when locking @mnt_to. This avoids the proliferation of shadow mounts. (2) if @to_mnt is moved to a different mountpoint while acquiring @namespace_sem to lock @to_mnt. (3) if @to_mnt is unmounted while acquiring @namespace_sem to lock @to_mnt. (4) if the parent of the target mount propagates to the target mount at the same mountpoint. This would mean mounting @mnt_from on @mnt_to->mnt_parent and then propagating a copy @c of @mnt_from onto @mnt_to. This defeats the whole purpose of mounting @mnt_from beneath @mnt_to. (5) if the parent mount @mnt_to->mnt_parent propagates to @mnt_from at the same mountpoint. If @mnt_to->mnt_parent propagates to @mnt_from this would mean propagating a copy @c of @mnt_from on top of @mnt_from. Afterwards @mnt_from would be mounted on top of @mnt_to->mnt_parent and @mnt_to would be unmounted from @mnt->mnt_parent and remounted on @mnt_from. But since @c is already mounted on @mnt_from, @mnt_to would ultimately be remounted on top of @c. Afterwards, @mnt_from would be covered by a copy @c of @mnt_from and @c would be covered by @mnt_from itself. This defeats the whole purpose of mounting @mnt_from beneath @mnt_to. Cases (1) to (3) are required as they deal with races that would cause bugs or unexpected behavior for users. Cases (4) and (5) refuse semantical quirks that would not be a bug but would cause weird mount trees to be created. While they can already be created via other means (mount --bind /opt /opt x n) there's no reason to repeat past mistakes in new features. Link: https://man7.org/linux/man-pages/man8/systemd-sysext.8.html [1] Link: https://brauner.io/2023/02/28/mounting-into-mount-namespaces.html [2] Link: https://github.com/flatcar/sysext-bakery Link: https://fedoraproject.org/wiki/Changes/Unified_Kernel_Support_Phase_1 Link: https://fedoraproject.org/wiki/Changes/Unified_Kernel_Support_Phase_2 Link: https://github.com/systemd/systemd/pull/26013 Reviewed-by: Seth Forshee (DigitalOcean) <sforshee@kernel.org> Message-Id: <20230202-fs-move-mount-replace-v4-4-98f3d80d7eaa@kernel.org> Signed-off-by: Christian Brauner <brauner@kernel.org>
2023-05-03 11:18:42 +00:00
struct mnt_namespace *ns = top_mnt->mnt_ns;
mnt: Tuck mounts under others instead of creating shadow/side mounts. Ever since mount propagation was introduced in cases where a mount in propagated to parent mount mountpoint pair that is already in use the code has placed the new mount behind the old mount in the mount hash table. This implementation detail is problematic as it allows creating arbitrary length mount hash chains. Furthermore it invalidates the constraint maintained elsewhere in the mount code that a parent mount and a mountpoint pair will have exactly one mount upon them. Making it hard to deal with and to talk about this special case in the mount code. Modify mount propagation to notice when there is already a mount at the parent mount and mountpoint where a new mount is propagating to and place that preexisting mount on top of the new mount. Modify unmount propagation to notice when a mount that is being unmounted has another mount on top of it (and no other children), and to replace the unmounted mount with the mount on top of it. Move the MNT_UMUONT test from __lookup_mnt_last into __propagate_umount as that is the only call of __lookup_mnt_last where MNT_UMOUNT may be set on any mount visible in the mount hash table. These modifications allow: - __lookup_mnt_last to be removed. - attach_shadows to be renamed __attach_mnt and its shadow handling to be removed. - commit_tree to be simplified - copy_tree to be simplified The result is an easier to understand tree of mounts that does not allow creation of arbitrary length hash chains in the mount hash table. The result is also a very slight userspace visible difference in semantics. The following two cases now behave identically, where before order mattered: case 1: (explicit user action) B is a slave of A mount something on A/a , it will propagate to B/a and than mount something on B/a case 2: (tucked mount) B is a slave of A mount something on B/a and than mount something on A/a Histroically umount A/a would fail in case 1 and succeed in case 2. Now umount A/a succeeds in both configurations. This very small change in semantics appears if anything to be a bug fix to me and my survey of userspace leads me to believe that no programs will notice or care of this subtle semantic change. v2: Updated to mnt_change_mountpoint to not call dput or mntput and instead to decrement the counts directly. It is guaranteed that there will be other references when mnt_change_mountpoint is called so this is safe. v3: Moved put_mountpoint under mount_lock in attach_recursive_mnt As the locking in fs/namespace.c changed between v2 and v3. v4: Reworked the logic in propagate_mount_busy and __propagate_umount that detects when a mount completely covers another mount. v5: Removed unnecessary tests whose result is alwasy true in find_topper and attach_recursive_mnt. v6: Document the user space visible semantic difference. Cc: stable@vger.kernel.org Fixes: b90fa9ae8f51 ("[PATCH] shared mount handling: bind and rbind") Tested-by: Andrei Vagin <avagin@virtuozzo.com> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2017-01-20 05:28:35 +00:00
struct mountpoint *smp;
fs: allow to mount beneath top mount Various distributions are adding or are in the process of adding support for system extensions and in the future configuration extensions through various tools. A more detailed explanation on system and configuration extensions can be found on the manpage which is listed below at [1]. System extension images may – dynamically at runtime — extend the /usr/ and /opt/ directory hierarchies with additional files. This is particularly useful on immutable system images where a /usr/ and/or /opt/ hierarchy residing on a read-only file system shall be extended temporarily at runtime without making any persistent modifications. When one or more system extension images are activated, their /usr/ and /opt/ hierarchies are combined via overlayfs with the same hierarchies of the host OS, and the host /usr/ and /opt/ overmounted with it ("merging"). When they are deactivated, the mount point is disassembled — again revealing the unmodified original host version of the hierarchy ("unmerging"). Merging thus makes the extension's resources suddenly appear below the /usr/ and /opt/ hierarchies as if they were included in the base OS image itself. Unmerging makes them disappear again, leaving in place only the files that were shipped with the base OS image itself. System configuration images are similar but operate on directories containing system or service configuration. On nearly all modern distributions mount propagation plays a crucial role and the rootfs of the OS is a shared mount in a peer group (usually with peer group id 1): TARGET SOURCE FSTYPE PROPAGATION MNT_ID PARENT_ID / / ext4 shared:1 29 1 On such systems all services and containers run in a separate mount namespace and are pivot_root()ed into their rootfs. A separate mount namespace is almost always used as it is the minimal isolation mechanism services have. But usually they are even much more isolated up to the point where they almost become indistinguishable from containers. Mount propagation again plays a crucial role here. The rootfs of all these services is a slave mount to the peer group of the host rootfs. This is done so the service will receive mount propagation events from the host when certain files or directories are updated. In addition, the rootfs of each service, container, and sandbox is also a shared mount in its separate peer group: TARGET SOURCE FSTYPE PROPAGATION MNT_ID PARENT_ID / / ext4 shared:24 master:1 71 47 For people not too familiar with mount propagation, the master:1 means that this is a slave mount to peer group 1. Which as one can see is the host rootfs as indicated by shared:1 above. The shared:24 indicates that the service rootfs is a shared mount in a separate peer group with peer group id 24. A service may run other services. Such nested services will also have a rootfs mount that is a slave to the peer group of the outer service rootfs mount. For containers things are just slighly different. A container's rootfs isn't a slave to the service's or host rootfs' peer group. The rootfs mount of a container is simply a shared mount in its own peer group: TARGET SOURCE FSTYPE PROPAGATION MNT_ID PARENT_ID /home/ubuntu/debian-tree / ext4 shared:99 61 60 So whereas services are isolated OS components a container is treated like a separate world and mount propagation into it is restricted to a single well known mount that is a slave to the peer group of the shared mount /run on the host: TARGET SOURCE FSTYPE PROPAGATION MNT_ID PARENT_ID /propagate/debian-tree /run/host/incoming tmpfs master:5 71 68 Here, the master:5 indicates that this mount is a slave to the peer group with peer group id 5. This allows to propagate mounts into the container and served as a workaround for not being able to insert mounts into mount namespaces directly. But the new mount api does support inserting mounts directly. For the interested reader the blogpost in [2] might be worth reading where I explain the old and the new approach to inserting mounts into mount namespaces. Containers of course, can themselves be run as services. They often run full systems themselves which means they again run services and containers with the exact same propagation settings explained above. The whole system is designed so that it can be easily updated, including all services in various fine-grained ways without having to enter every single service's mount namespace which would be prohibitively expensive. The mount propagation layout has been carefully chosen so it is possible to propagate updates for system extensions and configurations from the host into all services. The simplest model to update the whole system is to mount on top of /usr, /opt, or /etc on the host. The new mount on /usr, /opt, or /etc will then propagate into every service. This works cleanly the first time. However, when the system is updated multiple times it becomes necessary to unmount the first update on /opt, /usr, /etc and then propagate the new update. But this means, there's an interval where the old base system is accessible. This has to be avoided to protect against downgrade attacks. The vfs already exposes a mechanism to userspace whereby mounts can be mounted beneath an existing mount. Such mounts are internally referred to as "tucked". The patch series exposes the ability to mount beneath a top mount through the new MOVE_MOUNT_BENEATH flag for the move_mount() system call. This allows userspace to seamlessly upgrade mounts. After this series the only thing that will have changed is that mounting beneath an existing mount can be done explicitly instead of just implicitly. Today, there are two scenarios where a mount can be mounted beneath an existing mount instead of on top of it: (1) When a service or container is started in a new mount namespace and pivot_root()s into its new rootfs. The way this is done is by mounting the new rootfs beneath the old rootfs: fd_newroot = open("/var/lib/machines/fedora", ...); fd_oldroot = open("/", ...); fchdir(fd_newroot); pivot_root(".", "."); After the pivot_root(".", ".") call the new rootfs is mounted beneath the old rootfs which can then be unmounted to reveal the underlying mount: fchdir(fd_oldroot); umount2(".", MNT_DETACH); Since pivot_root() moves the caller into a new rootfs no mounts must be propagated out of the new rootfs as a consequence of the pivot_root() call. Thus, the mounts cannot be shared. (2) When a mount is propagated to a mount that already has another mount mounted on the same dentry. The easiest example for this is to create a new mount namespace. The following commands will create a mount namespace where the rootfs mount / will be a slave to the peer group of the host rootfs / mount's peer group. IOW, it will receive propagation from the host: mount --make-shared / unshare --mount --propagation=slave Now a new mount on the /mnt dentry in that mount namespace is created. (As it can be confusing it should be spelled out that the tmpfs mount on the /mnt dentry that was just created doesn't propagate back to the host because the rootfs mount / of the mount namespace isn't a peer of the host rootfs.): mount -t tmpfs tmpfs /mnt TARGET SOURCE FSTYPE PROPAGATION └─/mnt tmpfs tmpfs Now another terminal in the host mount namespace can observe that the mount indeed hasn't propagated back to into the host mount namespace. A new mount can now be created on top of the /mnt dentry with the rootfs mount / as its parent: mount --bind /opt /mnt TARGET SOURCE FSTYPE PROPAGATION └─/mnt /dev/sda2[/opt] ext4 shared:1 The mount namespace that was created earlier can now observe that the bind mount created on the host has propagated into it: TARGET SOURCE FSTYPE PROPAGATION └─/mnt /dev/sda2[/opt] ext4 master:1 └─/mnt tmpfs tmpfs But instead of having been mounted on top of the tmpfs mount at the /mnt dentry the /opt mount has been mounted on top of the rootfs mount at the /mnt dentry. And the tmpfs mount has been remounted on top of the propagated /opt mount at the /opt dentry. So in other words, the propagated mount has been mounted beneath the preexisting mount in that mount namespace. Mount namespaces make this easy to illustrate but it's also easy to mount beneath an existing mount in the same mount namespace (The following example assumes a shared rootfs mount / with peer group id 1): mount --bind /opt /opt TARGET SOURCE FSTYPE MNT_ID PARENT_ID PROPAGATION └─/opt /dev/sda2[/opt] ext4 188 29 shared:1 If another mount is mounted on top of the /opt mount at the /opt dentry: mount --bind /tmp /opt The following clunky mount tree will result: TARGET SOURCE FSTYPE MNT_ID PARENT_ID PROPAGATION └─/opt /dev/sda2[/tmp] ext4 405 29 shared:1 └─/opt /dev/sda2[/opt] ext4 188 405 shared:1 └─/opt /dev/sda2[/tmp] ext4 404 188 shared:1 The /tmp mount is mounted beneath the /opt mount and another copy is mounted on top of the /opt mount. This happens because the rootfs / and the /opt mount are shared mounts in the same peer group. When the new /tmp mount is supposed to be mounted at the /opt dentry then the /tmp mount first propagates to the root mount at the /opt dentry. But there already is the /opt mount mounted at the /opt dentry. So the old /opt mount at the /opt dentry will be mounted on top of the new /tmp mount at the /tmp dentry, i.e. @opt->mnt_parent is @tmp and @opt->mnt_mountpoint is /tmp (Note that @opt->mnt_root is /opt which is what shows up as /opt under SOURCE). So again, a mount will be mounted beneath a preexisting mount. (Fwiw, a few iterations of mount --bind /opt /opt in a loop on a shared rootfs is a good example of what could be referred to as mount explosion.) The main point is that such mounts allows userspace to umount a top mount and reveal an underlying mount. So for example, umounting the tmpfs mount on /mnt that was created in example (1) using mount namespaces reveals the /opt mount which was mounted beneath it. In (2) where a mount was mounted beneath the top mount in the same mount namespace unmounting the top mount would unmount both the top mount and the mount beneath. In the process the original mount would be remounted on top of the rootfs mount / at the /opt dentry again. This again, is a result of mount propagation only this time it's umount propagation. However, this can be avoided by simply making the parent mount / of the @opt mount a private or slave mount. Then the top mount and the original mount can be unmounted to reveal the mount beneath. These two examples are fairly arcane and are merely added to make it clear how mount propagation has effects on current and future features. More common use-cases will just be things like: mount -t btrfs /dev/sdA /mnt mount -t xfs /dev/sdB --beneath /mnt umount /mnt after which we'll have updated from a btrfs filesystem to a xfs filesystem without ever revealing the underlying mountpoint. The crux is that the proposed mechanism already exists and that it is so powerful as to cover cases where mounts are supposed to be updated with new versions. Crucially, it offers an important flexibility. Namely that updates to a system may either be forced or can be delayed and the umount of the top mount be left to a service if it is a cooperative one. This adds a new flag to move_mount() that allows to explicitly move a beneath the top mount adhering to the following semantics: * Mounts cannot be mounted beneath the rootfs. This restriction encompasses the rootfs but also chroots via chroot() and pivot_root(). To mount a mount beneath the rootfs or a chroot, pivot_root() can be used as illustrated above. * The source mount must be a private mount to force the kernel to allocate a new, unused peer group id. This isn't a required restriction but a voluntary one. It avoids repeating a semantical quirk that already exists today. If bind mounts which already have a peer group id are inserted into mount trees that have the same peer group id this can cause a lot of mount propagation events to be generated (For example, consider running mount --bind /opt /opt in a loop where the parent mount is a shared mount.). * Avoid getting rid of the top mount in the kernel. Cooperative services need to be able to unmount the top mount themselves. This also avoids a good deal of additional complexity. The umount would have to be propagated which would be another rather expensive operation. So namespace_lock() and lock_mount_hash() would potentially have to be held for a long time for both a mount and umount propagation. That should be avoided. * The path to mount beneath must be mounted and attached. * The top mount and its parent must be in the caller's mount namespace and the caller must be able to mount in that mount namespace. * The caller must be able to unmount the top mount to prove that they could reveal the underlying mount. * The propagation tree is calculated based on the destination mount's parent mount and the destination mount's mountpoint on the parent mount. Of course, if the parent of the destination mount and the destination mount are shared mounts in the same peer group and the mountpoint of the new mount to be mounted is a subdir of their ->mnt_root then both will receive a mount of /opt. That's probably easier to understand with an example. Assuming a standard shared rootfs /: mount --bind /opt /opt mount --bind /tmp /opt will cause the same mount tree as: mount --bind /opt /opt mount --beneath /tmp /opt because both / and /opt are shared mounts/peers in the same peer group and the /opt dentry is a subdirectory of both the parent's and the child's ->mnt_root. If a mount tree like that is created it almost always is an accident or abuse of mount propagation. Realistically what most people probably mean in this scenarios is: mount --bind /opt /opt mount --make-private /opt mount --make-shared /opt This forces the allocation of a new separate peer group for the /opt mount. Aferwards a mount --bind or mount --beneath actually makes sense as the / and /opt mount belong to different peer groups. Before that it's likely just confusion about what the user wanted to achieve. * Refuse MOVE_MOUNT_BENEATH if: (1) the @mnt_from has been overmounted in between path resolution and acquiring @namespace_sem when locking @mnt_to. This avoids the proliferation of shadow mounts. (2) if @to_mnt is moved to a different mountpoint while acquiring @namespace_sem to lock @to_mnt. (3) if @to_mnt is unmounted while acquiring @namespace_sem to lock @to_mnt. (4) if the parent of the target mount propagates to the target mount at the same mountpoint. This would mean mounting @mnt_from on @mnt_to->mnt_parent and then propagating a copy @c of @mnt_from onto @mnt_to. This defeats the whole purpose of mounting @mnt_from beneath @mnt_to. (5) if the parent mount @mnt_to->mnt_parent propagates to @mnt_from at the same mountpoint. If @mnt_to->mnt_parent propagates to @mnt_from this would mean propagating a copy @c of @mnt_from on top of @mnt_from. Afterwards @mnt_from would be mounted on top of @mnt_to->mnt_parent and @mnt_to would be unmounted from @mnt->mnt_parent and remounted on @mnt_from. But since @c is already mounted on @mnt_from, @mnt_to would ultimately be remounted on top of @c. Afterwards, @mnt_from would be covered by a copy @c of @mnt_from and @c would be covered by @mnt_from itself. This defeats the whole purpose of mounting @mnt_from beneath @mnt_to. Cases (1) to (3) are required as they deal with races that would cause bugs or unexpected behavior for users. Cases (4) and (5) refuse semantical quirks that would not be a bug but would cause weird mount trees to be created. While they can already be created via other means (mount --bind /opt /opt x n) there's no reason to repeat past mistakes in new features. Link: https://man7.org/linux/man-pages/man8/systemd-sysext.8.html [1] Link: https://brauner.io/2023/02/28/mounting-into-mount-namespaces.html [2] Link: https://github.com/flatcar/sysext-bakery Link: https://fedoraproject.org/wiki/Changes/Unified_Kernel_Support_Phase_1 Link: https://fedoraproject.org/wiki/Changes/Unified_Kernel_Support_Phase_2 Link: https://github.com/systemd/systemd/pull/26013 Reviewed-by: Seth Forshee (DigitalOcean) <sforshee@kernel.org> Message-Id: <20230202-fs-move-mount-replace-v4-4-98f3d80d7eaa@kernel.org> Signed-off-by: Christian Brauner <brauner@kernel.org>
2023-05-03 11:18:42 +00:00
struct mount *child, *dest_mnt, *p;
struct hlist_node *n;
fs: allow to mount beneath top mount Various distributions are adding or are in the process of adding support for system extensions and in the future configuration extensions through various tools. A more detailed explanation on system and configuration extensions can be found on the manpage which is listed below at [1]. System extension images may – dynamically at runtime — extend the /usr/ and /opt/ directory hierarchies with additional files. This is particularly useful on immutable system images where a /usr/ and/or /opt/ hierarchy residing on a read-only file system shall be extended temporarily at runtime without making any persistent modifications. When one or more system extension images are activated, their /usr/ and /opt/ hierarchies are combined via overlayfs with the same hierarchies of the host OS, and the host /usr/ and /opt/ overmounted with it ("merging"). When they are deactivated, the mount point is disassembled — again revealing the unmodified original host version of the hierarchy ("unmerging"). Merging thus makes the extension's resources suddenly appear below the /usr/ and /opt/ hierarchies as if they were included in the base OS image itself. Unmerging makes them disappear again, leaving in place only the files that were shipped with the base OS image itself. System configuration images are similar but operate on directories containing system or service configuration. On nearly all modern distributions mount propagation plays a crucial role and the rootfs of the OS is a shared mount in a peer group (usually with peer group id 1): TARGET SOURCE FSTYPE PROPAGATION MNT_ID PARENT_ID / / ext4 shared:1 29 1 On such systems all services and containers run in a separate mount namespace and are pivot_root()ed into their rootfs. A separate mount namespace is almost always used as it is the minimal isolation mechanism services have. But usually they are even much more isolated up to the point where they almost become indistinguishable from containers. Mount propagation again plays a crucial role here. The rootfs of all these services is a slave mount to the peer group of the host rootfs. This is done so the service will receive mount propagation events from the host when certain files or directories are updated. In addition, the rootfs of each service, container, and sandbox is also a shared mount in its separate peer group: TARGET SOURCE FSTYPE PROPAGATION MNT_ID PARENT_ID / / ext4 shared:24 master:1 71 47 For people not too familiar with mount propagation, the master:1 means that this is a slave mount to peer group 1. Which as one can see is the host rootfs as indicated by shared:1 above. The shared:24 indicates that the service rootfs is a shared mount in a separate peer group with peer group id 24. A service may run other services. Such nested services will also have a rootfs mount that is a slave to the peer group of the outer service rootfs mount. For containers things are just slighly different. A container's rootfs isn't a slave to the service's or host rootfs' peer group. The rootfs mount of a container is simply a shared mount in its own peer group: TARGET SOURCE FSTYPE PROPAGATION MNT_ID PARENT_ID /home/ubuntu/debian-tree / ext4 shared:99 61 60 So whereas services are isolated OS components a container is treated like a separate world and mount propagation into it is restricted to a single well known mount that is a slave to the peer group of the shared mount /run on the host: TARGET SOURCE FSTYPE PROPAGATION MNT_ID PARENT_ID /propagate/debian-tree /run/host/incoming tmpfs master:5 71 68 Here, the master:5 indicates that this mount is a slave to the peer group with peer group id 5. This allows to propagate mounts into the container and served as a workaround for not being able to insert mounts into mount namespaces directly. But the new mount api does support inserting mounts directly. For the interested reader the blogpost in [2] might be worth reading where I explain the old and the new approach to inserting mounts into mount namespaces. Containers of course, can themselves be run as services. They often run full systems themselves which means they again run services and containers with the exact same propagation settings explained above. The whole system is designed so that it can be easily updated, including all services in various fine-grained ways without having to enter every single service's mount namespace which would be prohibitively expensive. The mount propagation layout has been carefully chosen so it is possible to propagate updates for system extensions and configurations from the host into all services. The simplest model to update the whole system is to mount on top of /usr, /opt, or /etc on the host. The new mount on /usr, /opt, or /etc will then propagate into every service. This works cleanly the first time. However, when the system is updated multiple times it becomes necessary to unmount the first update on /opt, /usr, /etc and then propagate the new update. But this means, there's an interval where the old base system is accessible. This has to be avoided to protect against downgrade attacks. The vfs already exposes a mechanism to userspace whereby mounts can be mounted beneath an existing mount. Such mounts are internally referred to as "tucked". The patch series exposes the ability to mount beneath a top mount through the new MOVE_MOUNT_BENEATH flag for the move_mount() system call. This allows userspace to seamlessly upgrade mounts. After this series the only thing that will have changed is that mounting beneath an existing mount can be done explicitly instead of just implicitly. Today, there are two scenarios where a mount can be mounted beneath an existing mount instead of on top of it: (1) When a service or container is started in a new mount namespace and pivot_root()s into its new rootfs. The way this is done is by mounting the new rootfs beneath the old rootfs: fd_newroot = open("/var/lib/machines/fedora", ...); fd_oldroot = open("/", ...); fchdir(fd_newroot); pivot_root(".", "."); After the pivot_root(".", ".") call the new rootfs is mounted beneath the old rootfs which can then be unmounted to reveal the underlying mount: fchdir(fd_oldroot); umount2(".", MNT_DETACH); Since pivot_root() moves the caller into a new rootfs no mounts must be propagated out of the new rootfs as a consequence of the pivot_root() call. Thus, the mounts cannot be shared. (2) When a mount is propagated to a mount that already has another mount mounted on the same dentry. The easiest example for this is to create a new mount namespace. The following commands will create a mount namespace where the rootfs mount / will be a slave to the peer group of the host rootfs / mount's peer group. IOW, it will receive propagation from the host: mount --make-shared / unshare --mount --propagation=slave Now a new mount on the /mnt dentry in that mount namespace is created. (As it can be confusing it should be spelled out that the tmpfs mount on the /mnt dentry that was just created doesn't propagate back to the host because the rootfs mount / of the mount namespace isn't a peer of the host rootfs.): mount -t tmpfs tmpfs /mnt TARGET SOURCE FSTYPE PROPAGATION └─/mnt tmpfs tmpfs Now another terminal in the host mount namespace can observe that the mount indeed hasn't propagated back to into the host mount namespace. A new mount can now be created on top of the /mnt dentry with the rootfs mount / as its parent: mount --bind /opt /mnt TARGET SOURCE FSTYPE PROPAGATION └─/mnt /dev/sda2[/opt] ext4 shared:1 The mount namespace that was created earlier can now observe that the bind mount created on the host has propagated into it: TARGET SOURCE FSTYPE PROPAGATION └─/mnt /dev/sda2[/opt] ext4 master:1 └─/mnt tmpfs tmpfs But instead of having been mounted on top of the tmpfs mount at the /mnt dentry the /opt mount has been mounted on top of the rootfs mount at the /mnt dentry. And the tmpfs mount has been remounted on top of the propagated /opt mount at the /opt dentry. So in other words, the propagated mount has been mounted beneath the preexisting mount in that mount namespace. Mount namespaces make this easy to illustrate but it's also easy to mount beneath an existing mount in the same mount namespace (The following example assumes a shared rootfs mount / with peer group id 1): mount --bind /opt /opt TARGET SOURCE FSTYPE MNT_ID PARENT_ID PROPAGATION └─/opt /dev/sda2[/opt] ext4 188 29 shared:1 If another mount is mounted on top of the /opt mount at the /opt dentry: mount --bind /tmp /opt The following clunky mount tree will result: TARGET SOURCE FSTYPE MNT_ID PARENT_ID PROPAGATION └─/opt /dev/sda2[/tmp] ext4 405 29 shared:1 └─/opt /dev/sda2[/opt] ext4 188 405 shared:1 └─/opt /dev/sda2[/tmp] ext4 404 188 shared:1 The /tmp mount is mounted beneath the /opt mount and another copy is mounted on top of the /opt mount. This happens because the rootfs / and the /opt mount are shared mounts in the same peer group. When the new /tmp mount is supposed to be mounted at the /opt dentry then the /tmp mount first propagates to the root mount at the /opt dentry. But there already is the /opt mount mounted at the /opt dentry. So the old /opt mount at the /opt dentry will be mounted on top of the new /tmp mount at the /tmp dentry, i.e. @opt->mnt_parent is @tmp and @opt->mnt_mountpoint is /tmp (Note that @opt->mnt_root is /opt which is what shows up as /opt under SOURCE). So again, a mount will be mounted beneath a preexisting mount. (Fwiw, a few iterations of mount --bind /opt /opt in a loop on a shared rootfs is a good example of what could be referred to as mount explosion.) The main point is that such mounts allows userspace to umount a top mount and reveal an underlying mount. So for example, umounting the tmpfs mount on /mnt that was created in example (1) using mount namespaces reveals the /opt mount which was mounted beneath it. In (2) where a mount was mounted beneath the top mount in the same mount namespace unmounting the top mount would unmount both the top mount and the mount beneath. In the process the original mount would be remounted on top of the rootfs mount / at the /opt dentry again. This again, is a result of mount propagation only this time it's umount propagation. However, this can be avoided by simply making the parent mount / of the @opt mount a private or slave mount. Then the top mount and the original mount can be unmounted to reveal the mount beneath. These two examples are fairly arcane and are merely added to make it clear how mount propagation has effects on current and future features. More common use-cases will just be things like: mount -t btrfs /dev/sdA /mnt mount -t xfs /dev/sdB --beneath /mnt umount /mnt after which we'll have updated from a btrfs filesystem to a xfs filesystem without ever revealing the underlying mountpoint. The crux is that the proposed mechanism already exists and that it is so powerful as to cover cases where mounts are supposed to be updated with new versions. Crucially, it offers an important flexibility. Namely that updates to a system may either be forced or can be delayed and the umount of the top mount be left to a service if it is a cooperative one. This adds a new flag to move_mount() that allows to explicitly move a beneath the top mount adhering to the following semantics: * Mounts cannot be mounted beneath the rootfs. This restriction encompasses the rootfs but also chroots via chroot() and pivot_root(). To mount a mount beneath the rootfs or a chroot, pivot_root() can be used as illustrated above. * The source mount must be a private mount to force the kernel to allocate a new, unused peer group id. This isn't a required restriction but a voluntary one. It avoids repeating a semantical quirk that already exists today. If bind mounts which already have a peer group id are inserted into mount trees that have the same peer group id this can cause a lot of mount propagation events to be generated (For example, consider running mount --bind /opt /opt in a loop where the parent mount is a shared mount.). * Avoid getting rid of the top mount in the kernel. Cooperative services need to be able to unmount the top mount themselves. This also avoids a good deal of additional complexity. The umount would have to be propagated which would be another rather expensive operation. So namespace_lock() and lock_mount_hash() would potentially have to be held for a long time for both a mount and umount propagation. That should be avoided. * The path to mount beneath must be mounted and attached. * The top mount and its parent must be in the caller's mount namespace and the caller must be able to mount in that mount namespace. * The caller must be able to unmount the top mount to prove that they could reveal the underlying mount. * The propagation tree is calculated based on the destination mount's parent mount and the destination mount's mountpoint on the parent mount. Of course, if the parent of the destination mount and the destination mount are shared mounts in the same peer group and the mountpoint of the new mount to be mounted is a subdir of their ->mnt_root then both will receive a mount of /opt. That's probably easier to understand with an example. Assuming a standard shared rootfs /: mount --bind /opt /opt mount --bind /tmp /opt will cause the same mount tree as: mount --bind /opt /opt mount --beneath /tmp /opt because both / and /opt are shared mounts/peers in the same peer group and the /opt dentry is a subdirectory of both the parent's and the child's ->mnt_root. If a mount tree like that is created it almost always is an accident or abuse of mount propagation. Realistically what most people probably mean in this scenarios is: mount --bind /opt /opt mount --make-private /opt mount --make-shared /opt This forces the allocation of a new separate peer group for the /opt mount. Aferwards a mount --bind or mount --beneath actually makes sense as the / and /opt mount belong to different peer groups. Before that it's likely just confusion about what the user wanted to achieve. * Refuse MOVE_MOUNT_BENEATH if: (1) the @mnt_from has been overmounted in between path resolution and acquiring @namespace_sem when locking @mnt_to. This avoids the proliferation of shadow mounts. (2) if @to_mnt is moved to a different mountpoint while acquiring @namespace_sem to lock @to_mnt. (3) if @to_mnt is unmounted while acquiring @namespace_sem to lock @to_mnt. (4) if the parent of the target mount propagates to the target mount at the same mountpoint. This would mean mounting @mnt_from on @mnt_to->mnt_parent and then propagating a copy @c of @mnt_from onto @mnt_to. This defeats the whole purpose of mounting @mnt_from beneath @mnt_to. (5) if the parent mount @mnt_to->mnt_parent propagates to @mnt_from at the same mountpoint. If @mnt_to->mnt_parent propagates to @mnt_from this would mean propagating a copy @c of @mnt_from on top of @mnt_from. Afterwards @mnt_from would be mounted on top of @mnt_to->mnt_parent and @mnt_to would be unmounted from @mnt->mnt_parent and remounted on @mnt_from. But since @c is already mounted on @mnt_from, @mnt_to would ultimately be remounted on top of @c. Afterwards, @mnt_from would be covered by a copy @c of @mnt_from and @c would be covered by @mnt_from itself. This defeats the whole purpose of mounting @mnt_from beneath @mnt_to. Cases (1) to (3) are required as they deal with races that would cause bugs or unexpected behavior for users. Cases (4) and (5) refuse semantical quirks that would not be a bug but would cause weird mount trees to be created. While they can already be created via other means (mount --bind /opt /opt x n) there's no reason to repeat past mistakes in new features. Link: https://man7.org/linux/man-pages/man8/systemd-sysext.8.html [1] Link: https://brauner.io/2023/02/28/mounting-into-mount-namespaces.html [2] Link: https://github.com/flatcar/sysext-bakery Link: https://fedoraproject.org/wiki/Changes/Unified_Kernel_Support_Phase_1 Link: https://fedoraproject.org/wiki/Changes/Unified_Kernel_Support_Phase_2 Link: https://github.com/systemd/systemd/pull/26013 Reviewed-by: Seth Forshee (DigitalOcean) <sforshee@kernel.org> Message-Id: <20230202-fs-move-mount-replace-v4-4-98f3d80d7eaa@kernel.org> Signed-off-by: Christian Brauner <brauner@kernel.org>
2023-05-03 11:18:42 +00:00
int err = 0;
bool moving = flags & MNT_TREE_MOVE, beneath = flags & MNT_TREE_BENEATH;
fs: allow to mount beneath top mount Various distributions are adding or are in the process of adding support for system extensions and in the future configuration extensions through various tools. A more detailed explanation on system and configuration extensions can be found on the manpage which is listed below at [1]. System extension images may – dynamically at runtime — extend the /usr/ and /opt/ directory hierarchies with additional files. This is particularly useful on immutable system images where a /usr/ and/or /opt/ hierarchy residing on a read-only file system shall be extended temporarily at runtime without making any persistent modifications. When one or more system extension images are activated, their /usr/ and /opt/ hierarchies are combined via overlayfs with the same hierarchies of the host OS, and the host /usr/ and /opt/ overmounted with it ("merging"). When they are deactivated, the mount point is disassembled — again revealing the unmodified original host version of the hierarchy ("unmerging"). Merging thus makes the extension's resources suddenly appear below the /usr/ and /opt/ hierarchies as if they were included in the base OS image itself. Unmerging makes them disappear again, leaving in place only the files that were shipped with the base OS image itself. System configuration images are similar but operate on directories containing system or service configuration. On nearly all modern distributions mount propagation plays a crucial role and the rootfs of the OS is a shared mount in a peer group (usually with peer group id 1): TARGET SOURCE FSTYPE PROPAGATION MNT_ID PARENT_ID / / ext4 shared:1 29 1 On such systems all services and containers run in a separate mount namespace and are pivot_root()ed into their rootfs. A separate mount namespace is almost always used as it is the minimal isolation mechanism services have. But usually they are even much more isolated up to the point where they almost become indistinguishable from containers. Mount propagation again plays a crucial role here. The rootfs of all these services is a slave mount to the peer group of the host rootfs. This is done so the service will receive mount propagation events from the host when certain files or directories are updated. In addition, the rootfs of each service, container, and sandbox is also a shared mount in its separate peer group: TARGET SOURCE FSTYPE PROPAGATION MNT_ID PARENT_ID / / ext4 shared:24 master:1 71 47 For people not too familiar with mount propagation, the master:1 means that this is a slave mount to peer group 1. Which as one can see is the host rootfs as indicated by shared:1 above. The shared:24 indicates that the service rootfs is a shared mount in a separate peer group with peer group id 24. A service may run other services. Such nested services will also have a rootfs mount that is a slave to the peer group of the outer service rootfs mount. For containers things are just slighly different. A container's rootfs isn't a slave to the service's or host rootfs' peer group. The rootfs mount of a container is simply a shared mount in its own peer group: TARGET SOURCE FSTYPE PROPAGATION MNT_ID PARENT_ID /home/ubuntu/debian-tree / ext4 shared:99 61 60 So whereas services are isolated OS components a container is treated like a separate world and mount propagation into it is restricted to a single well known mount that is a slave to the peer group of the shared mount /run on the host: TARGET SOURCE FSTYPE PROPAGATION MNT_ID PARENT_ID /propagate/debian-tree /run/host/incoming tmpfs master:5 71 68 Here, the master:5 indicates that this mount is a slave to the peer group with peer group id 5. This allows to propagate mounts into the container and served as a workaround for not being able to insert mounts into mount namespaces directly. But the new mount api does support inserting mounts directly. For the interested reader the blogpost in [2] might be worth reading where I explain the old and the new approach to inserting mounts into mount namespaces. Containers of course, can themselves be run as services. They often run full systems themselves which means they again run services and containers with the exact same propagation settings explained above. The whole system is designed so that it can be easily updated, including all services in various fine-grained ways without having to enter every single service's mount namespace which would be prohibitively expensive. The mount propagation layout has been carefully chosen so it is possible to propagate updates for system extensions and configurations from the host into all services. The simplest model to update the whole system is to mount on top of /usr, /opt, or /etc on the host. The new mount on /usr, /opt, or /etc will then propagate into every service. This works cleanly the first time. However, when the system is updated multiple times it becomes necessary to unmount the first update on /opt, /usr, /etc and then propagate the new update. But this means, there's an interval where the old base system is accessible. This has to be avoided to protect against downgrade attacks. The vfs already exposes a mechanism to userspace whereby mounts can be mounted beneath an existing mount. Such mounts are internally referred to as "tucked". The patch series exposes the ability to mount beneath a top mount through the new MOVE_MOUNT_BENEATH flag for the move_mount() system call. This allows userspace to seamlessly upgrade mounts. After this series the only thing that will have changed is that mounting beneath an existing mount can be done explicitly instead of just implicitly. Today, there are two scenarios where a mount can be mounted beneath an existing mount instead of on top of it: (1) When a service or container is started in a new mount namespace and pivot_root()s into its new rootfs. The way this is done is by mounting the new rootfs beneath the old rootfs: fd_newroot = open("/var/lib/machines/fedora", ...); fd_oldroot = open("/", ...); fchdir(fd_newroot); pivot_root(".", "."); After the pivot_root(".", ".") call the new rootfs is mounted beneath the old rootfs which can then be unmounted to reveal the underlying mount: fchdir(fd_oldroot); umount2(".", MNT_DETACH); Since pivot_root() moves the caller into a new rootfs no mounts must be propagated out of the new rootfs as a consequence of the pivot_root() call. Thus, the mounts cannot be shared. (2) When a mount is propagated to a mount that already has another mount mounted on the same dentry. The easiest example for this is to create a new mount namespace. The following commands will create a mount namespace where the rootfs mount / will be a slave to the peer group of the host rootfs / mount's peer group. IOW, it will receive propagation from the host: mount --make-shared / unshare --mount --propagation=slave Now a new mount on the /mnt dentry in that mount namespace is created. (As it can be confusing it should be spelled out that the tmpfs mount on the /mnt dentry that was just created doesn't propagate back to the host because the rootfs mount / of the mount namespace isn't a peer of the host rootfs.): mount -t tmpfs tmpfs /mnt TARGET SOURCE FSTYPE PROPAGATION └─/mnt tmpfs tmpfs Now another terminal in the host mount namespace can observe that the mount indeed hasn't propagated back to into the host mount namespace. A new mount can now be created on top of the /mnt dentry with the rootfs mount / as its parent: mount --bind /opt /mnt TARGET SOURCE FSTYPE PROPAGATION └─/mnt /dev/sda2[/opt] ext4 shared:1 The mount namespace that was created earlier can now observe that the bind mount created on the host has propagated into it: TARGET SOURCE FSTYPE PROPAGATION └─/mnt /dev/sda2[/opt] ext4 master:1 └─/mnt tmpfs tmpfs But instead of having been mounted on top of the tmpfs mount at the /mnt dentry the /opt mount has been mounted on top of the rootfs mount at the /mnt dentry. And the tmpfs mount has been remounted on top of the propagated /opt mount at the /opt dentry. So in other words, the propagated mount has been mounted beneath the preexisting mount in that mount namespace. Mount namespaces make this easy to illustrate but it's also easy to mount beneath an existing mount in the same mount namespace (The following example assumes a shared rootfs mount / with peer group id 1): mount --bind /opt /opt TARGET SOURCE FSTYPE MNT_ID PARENT_ID PROPAGATION └─/opt /dev/sda2[/opt] ext4 188 29 shared:1 If another mount is mounted on top of the /opt mount at the /opt dentry: mount --bind /tmp /opt The following clunky mount tree will result: TARGET SOURCE FSTYPE MNT_ID PARENT_ID PROPAGATION └─/opt /dev/sda2[/tmp] ext4 405 29 shared:1 └─/opt /dev/sda2[/opt] ext4 188 405 shared:1 └─/opt /dev/sda2[/tmp] ext4 404 188 shared:1 The /tmp mount is mounted beneath the /opt mount and another copy is mounted on top of the /opt mount. This happens because the rootfs / and the /opt mount are shared mounts in the same peer group. When the new /tmp mount is supposed to be mounted at the /opt dentry then the /tmp mount first propagates to the root mount at the /opt dentry. But there already is the /opt mount mounted at the /opt dentry. So the old /opt mount at the /opt dentry will be mounted on top of the new /tmp mount at the /tmp dentry, i.e. @opt->mnt_parent is @tmp and @opt->mnt_mountpoint is /tmp (Note that @opt->mnt_root is /opt which is what shows up as /opt under SOURCE). So again, a mount will be mounted beneath a preexisting mount. (Fwiw, a few iterations of mount --bind /opt /opt in a loop on a shared rootfs is a good example of what could be referred to as mount explosion.) The main point is that such mounts allows userspace to umount a top mount and reveal an underlying mount. So for example, umounting the tmpfs mount on /mnt that was created in example (1) using mount namespaces reveals the /opt mount which was mounted beneath it. In (2) where a mount was mounted beneath the top mount in the same mount namespace unmounting the top mount would unmount both the top mount and the mount beneath. In the process the original mount would be remounted on top of the rootfs mount / at the /opt dentry again. This again, is a result of mount propagation only this time it's umount propagation. However, this can be avoided by simply making the parent mount / of the @opt mount a private or slave mount. Then the top mount and the original mount can be unmounted to reveal the mount beneath. These two examples are fairly arcane and are merely added to make it clear how mount propagation has effects on current and future features. More common use-cases will just be things like: mount -t btrfs /dev/sdA /mnt mount -t xfs /dev/sdB --beneath /mnt umount /mnt after which we'll have updated from a btrfs filesystem to a xfs filesystem without ever revealing the underlying mountpoint. The crux is that the proposed mechanism already exists and that it is so powerful as to cover cases where mounts are supposed to be updated with new versions. Crucially, it offers an important flexibility. Namely that updates to a system may either be forced or can be delayed and the umount of the top mount be left to a service if it is a cooperative one. This adds a new flag to move_mount() that allows to explicitly move a beneath the top mount adhering to the following semantics: * Mounts cannot be mounted beneath the rootfs. This restriction encompasses the rootfs but also chroots via chroot() and pivot_root(). To mount a mount beneath the rootfs or a chroot, pivot_root() can be used as illustrated above. * The source mount must be a private mount to force the kernel to allocate a new, unused peer group id. This isn't a required restriction but a voluntary one. It avoids repeating a semantical quirk that already exists today. If bind mounts which already have a peer group id are inserted into mount trees that have the same peer group id this can cause a lot of mount propagation events to be generated (For example, consider running mount --bind /opt /opt in a loop where the parent mount is a shared mount.). * Avoid getting rid of the top mount in the kernel. Cooperative services need to be able to unmount the top mount themselves. This also avoids a good deal of additional complexity. The umount would have to be propagated which would be another rather expensive operation. So namespace_lock() and lock_mount_hash() would potentially have to be held for a long time for both a mount and umount propagation. That should be avoided. * The path to mount beneath must be mounted and attached. * The top mount and its parent must be in the caller's mount namespace and the caller must be able to mount in that mount namespace. * The caller must be able to unmount the top mount to prove that they could reveal the underlying mount. * The propagation tree is calculated based on the destination mount's parent mount and the destination mount's mountpoint on the parent mount. Of course, if the parent of the destination mount and the destination mount are shared mounts in the same peer group and the mountpoint of the new mount to be mounted is a subdir of their ->mnt_root then both will receive a mount of /opt. That's probably easier to understand with an example. Assuming a standard shared rootfs /: mount --bind /opt /opt mount --bind /tmp /opt will cause the same mount tree as: mount --bind /opt /opt mount --beneath /tmp /opt because both / and /opt are shared mounts/peers in the same peer group and the /opt dentry is a subdirectory of both the parent's and the child's ->mnt_root. If a mount tree like that is created it almost always is an accident or abuse of mount propagation. Realistically what most people probably mean in this scenarios is: mount --bind /opt /opt mount --make-private /opt mount --make-shared /opt This forces the allocation of a new separate peer group for the /opt mount. Aferwards a mount --bind or mount --beneath actually makes sense as the / and /opt mount belong to different peer groups. Before that it's likely just confusion about what the user wanted to achieve. * Refuse MOVE_MOUNT_BENEATH if: (1) the @mnt_from has been overmounted in between path resolution and acquiring @namespace_sem when locking @mnt_to. This avoids the proliferation of shadow mounts. (2) if @to_mnt is moved to a different mountpoint while acquiring @namespace_sem to lock @to_mnt. (3) if @to_mnt is unmounted while acquiring @namespace_sem to lock @to_mnt. (4) if the parent of the target mount propagates to the target mount at the same mountpoint. This would mean mounting @mnt_from on @mnt_to->mnt_parent and then propagating a copy @c of @mnt_from onto @mnt_to. This defeats the whole purpose of mounting @mnt_from beneath @mnt_to. (5) if the parent mount @mnt_to->mnt_parent propagates to @mnt_from at the same mountpoint. If @mnt_to->mnt_parent propagates to @mnt_from this would mean propagating a copy @c of @mnt_from on top of @mnt_from. Afterwards @mnt_from would be mounted on top of @mnt_to->mnt_parent and @mnt_to would be unmounted from @mnt->mnt_parent and remounted on @mnt_from. But since @c is already mounted on @mnt_from, @mnt_to would ultimately be remounted on top of @c. Afterwards, @mnt_from would be covered by a copy @c of @mnt_from and @c would be covered by @mnt_from itself. This defeats the whole purpose of mounting @mnt_from beneath @mnt_to. Cases (1) to (3) are required as they deal with races that would cause bugs or unexpected behavior for users. Cases (4) and (5) refuse semantical quirks that would not be a bug but would cause weird mount trees to be created. While they can already be created via other means (mount --bind /opt /opt x n) there's no reason to repeat past mistakes in new features. Link: https://man7.org/linux/man-pages/man8/systemd-sysext.8.html [1] Link: https://brauner.io/2023/02/28/mounting-into-mount-namespaces.html [2] Link: https://github.com/flatcar/sysext-bakery Link: https://fedoraproject.org/wiki/Changes/Unified_Kernel_Support_Phase_1 Link: https://fedoraproject.org/wiki/Changes/Unified_Kernel_Support_Phase_2 Link: https://github.com/systemd/systemd/pull/26013 Reviewed-by: Seth Forshee (DigitalOcean) <sforshee@kernel.org> Message-Id: <20230202-fs-move-mount-replace-v4-4-98f3d80d7eaa@kernel.org> Signed-off-by: Christian Brauner <brauner@kernel.org>
2023-05-03 11:18:42 +00:00
/*
* Preallocate a mountpoint in case the new mounts need to be
* mounted beneath mounts on the same mountpoint.
mnt: Tuck mounts under others instead of creating shadow/side mounts. Ever since mount propagation was introduced in cases where a mount in propagated to parent mount mountpoint pair that is already in use the code has placed the new mount behind the old mount in the mount hash table. This implementation detail is problematic as it allows creating arbitrary length mount hash chains. Furthermore it invalidates the constraint maintained elsewhere in the mount code that a parent mount and a mountpoint pair will have exactly one mount upon them. Making it hard to deal with and to talk about this special case in the mount code. Modify mount propagation to notice when there is already a mount at the parent mount and mountpoint where a new mount is propagating to and place that preexisting mount on top of the new mount. Modify unmount propagation to notice when a mount that is being unmounted has another mount on top of it (and no other children), and to replace the unmounted mount with the mount on top of it. Move the MNT_UMUONT test from __lookup_mnt_last into __propagate_umount as that is the only call of __lookup_mnt_last where MNT_UMOUNT may be set on any mount visible in the mount hash table. These modifications allow: - __lookup_mnt_last to be removed. - attach_shadows to be renamed __attach_mnt and its shadow handling to be removed. - commit_tree to be simplified - copy_tree to be simplified The result is an easier to understand tree of mounts that does not allow creation of arbitrary length hash chains in the mount hash table. The result is also a very slight userspace visible difference in semantics. The following two cases now behave identically, where before order mattered: case 1: (explicit user action) B is a slave of A mount something on A/a , it will propagate to B/a and than mount something on B/a case 2: (tucked mount) B is a slave of A mount something on B/a and than mount something on A/a Histroically umount A/a would fail in case 1 and succeed in case 2. Now umount A/a succeeds in both configurations. This very small change in semantics appears if anything to be a bug fix to me and my survey of userspace leads me to believe that no programs will notice or care of this subtle semantic change. v2: Updated to mnt_change_mountpoint to not call dput or mntput and instead to decrement the counts directly. It is guaranteed that there will be other references when mnt_change_mountpoint is called so this is safe. v3: Moved put_mountpoint under mount_lock in attach_recursive_mnt As the locking in fs/namespace.c changed between v2 and v3. v4: Reworked the logic in propagate_mount_busy and __propagate_umount that detects when a mount completely covers another mount. v5: Removed unnecessary tests whose result is alwasy true in find_topper and attach_recursive_mnt. v6: Document the user space visible semantic difference. Cc: stable@vger.kernel.org Fixes: b90fa9ae8f51 ("[PATCH] shared mount handling: bind and rbind") Tested-by: Andrei Vagin <avagin@virtuozzo.com> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2017-01-20 05:28:35 +00:00
*/
smp = get_mountpoint(source_mnt->mnt.mnt_root);
if (IS_ERR(smp))
return PTR_ERR(smp);
mnt: Add a per mount namespace limit on the number of mounts CAI Qian <caiqian@redhat.com> pointed out that the semantics of shared subtrees make it possible to create an exponentially increasing number of mounts in a mount namespace. mkdir /tmp/1 /tmp/2 mount --make-rshared / for i in $(seq 1 20) ; do mount --bind /tmp/1 /tmp/2 ; done Will create create 2^20 or 1048576 mounts, which is a practical problem as some people have managed to hit this by accident. As such CVE-2016-6213 was assigned. Ian Kent <raven@themaw.net> described the situation for autofs users as follows: > The number of mounts for direct mount maps is usually not very large because of > the way they are implemented, large direct mount maps can have performance > problems. There can be anywhere from a few (likely case a few hundred) to less > than 10000, plus mounts that have been triggered and not yet expired. > > Indirect mounts have one autofs mount at the root plus the number of mounts that > have been triggered and not yet expired. > > The number of autofs indirect map entries can range from a few to the common > case of several thousand and in rare cases up to between 30000 and 50000. I've > not heard of people with maps larger than 50000 entries. > > The larger the number of map entries the greater the possibility for a large > number of active mounts so it's not hard to expect cases of a 1000 or somewhat > more active mounts. So I am setting the default number of mounts allowed per mount namespace at 100,000. This is more than enough for any use case I know of, but small enough to quickly stop an exponential increase in mounts. Which should be perfect to catch misconfigurations and malfunctioning programs. For anyone who needs a higher limit this can be changed by writing to the new /proc/sys/fs/mount-max sysctl. Tested-by: CAI Qian <caiqian@redhat.com> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2016-09-28 05:27:17 +00:00
/* Is there space to add these mounts to the mount namespace? */
if (!moving) {
mnt: Add a per mount namespace limit on the number of mounts CAI Qian <caiqian@redhat.com> pointed out that the semantics of shared subtrees make it possible to create an exponentially increasing number of mounts in a mount namespace. mkdir /tmp/1 /tmp/2 mount --make-rshared / for i in $(seq 1 20) ; do mount --bind /tmp/1 /tmp/2 ; done Will create create 2^20 or 1048576 mounts, which is a practical problem as some people have managed to hit this by accident. As such CVE-2016-6213 was assigned. Ian Kent <raven@themaw.net> described the situation for autofs users as follows: > The number of mounts for direct mount maps is usually not very large because of > the way they are implemented, large direct mount maps can have performance > problems. There can be anywhere from a few (likely case a few hundred) to less > than 10000, plus mounts that have been triggered and not yet expired. > > Indirect mounts have one autofs mount at the root plus the number of mounts that > have been triggered and not yet expired. > > The number of autofs indirect map entries can range from a few to the common > case of several thousand and in rare cases up to between 30000 and 50000. I've > not heard of people with maps larger than 50000 entries. > > The larger the number of map entries the greater the possibility for a large > number of active mounts so it's not hard to expect cases of a 1000 or somewhat > more active mounts. So I am setting the default number of mounts allowed per mount namespace at 100,000. This is more than enough for any use case I know of, but small enough to quickly stop an exponential increase in mounts. Which should be perfect to catch misconfigurations and malfunctioning programs. For anyone who needs a higher limit this can be changed by writing to the new /proc/sys/fs/mount-max sysctl. Tested-by: CAI Qian <caiqian@redhat.com> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2016-09-28 05:27:17 +00:00
err = count_mounts(ns, source_mnt);
if (err)
goto out;
}
fs: allow to mount beneath top mount Various distributions are adding or are in the process of adding support for system extensions and in the future configuration extensions through various tools. A more detailed explanation on system and configuration extensions can be found on the manpage which is listed below at [1]. System extension images may – dynamically at runtime — extend the /usr/ and /opt/ directory hierarchies with additional files. This is particularly useful on immutable system images where a /usr/ and/or /opt/ hierarchy residing on a read-only file system shall be extended temporarily at runtime without making any persistent modifications. When one or more system extension images are activated, their /usr/ and /opt/ hierarchies are combined via overlayfs with the same hierarchies of the host OS, and the host /usr/ and /opt/ overmounted with it ("merging"). When they are deactivated, the mount point is disassembled — again revealing the unmodified original host version of the hierarchy ("unmerging"). Merging thus makes the extension's resources suddenly appear below the /usr/ and /opt/ hierarchies as if they were included in the base OS image itself. Unmerging makes them disappear again, leaving in place only the files that were shipped with the base OS image itself. System configuration images are similar but operate on directories containing system or service configuration. On nearly all modern distributions mount propagation plays a crucial role and the rootfs of the OS is a shared mount in a peer group (usually with peer group id 1): TARGET SOURCE FSTYPE PROPAGATION MNT_ID PARENT_ID / / ext4 shared:1 29 1 On such systems all services and containers run in a separate mount namespace and are pivot_root()ed into their rootfs. A separate mount namespace is almost always used as it is the minimal isolation mechanism services have. But usually they are even much more isolated up to the point where they almost become indistinguishable from containers. Mount propagation again plays a crucial role here. The rootfs of all these services is a slave mount to the peer group of the host rootfs. This is done so the service will receive mount propagation events from the host when certain files or directories are updated. In addition, the rootfs of each service, container, and sandbox is also a shared mount in its separate peer group: TARGET SOURCE FSTYPE PROPAGATION MNT_ID PARENT_ID / / ext4 shared:24 master:1 71 47 For people not too familiar with mount propagation, the master:1 means that this is a slave mount to peer group 1. Which as one can see is the host rootfs as indicated by shared:1 above. The shared:24 indicates that the service rootfs is a shared mount in a separate peer group with peer group id 24. A service may run other services. Such nested services will also have a rootfs mount that is a slave to the peer group of the outer service rootfs mount. For containers things are just slighly different. A container's rootfs isn't a slave to the service's or host rootfs' peer group. The rootfs mount of a container is simply a shared mount in its own peer group: TARGET SOURCE FSTYPE PROPAGATION MNT_ID PARENT_ID /home/ubuntu/debian-tree / ext4 shared:99 61 60 So whereas services are isolated OS components a container is treated like a separate world and mount propagation into it is restricted to a single well known mount that is a slave to the peer group of the shared mount /run on the host: TARGET SOURCE FSTYPE PROPAGATION MNT_ID PARENT_ID /propagate/debian-tree /run/host/incoming tmpfs master:5 71 68 Here, the master:5 indicates that this mount is a slave to the peer group with peer group id 5. This allows to propagate mounts into the container and served as a workaround for not being able to insert mounts into mount namespaces directly. But the new mount api does support inserting mounts directly. For the interested reader the blogpost in [2] might be worth reading where I explain the old and the new approach to inserting mounts into mount namespaces. Containers of course, can themselves be run as services. They often run full systems themselves which means they again run services and containers with the exact same propagation settings explained above. The whole system is designed so that it can be easily updated, including all services in various fine-grained ways without having to enter every single service's mount namespace which would be prohibitively expensive. The mount propagation layout has been carefully chosen so it is possible to propagate updates for system extensions and configurations from the host into all services. The simplest model to update the whole system is to mount on top of /usr, /opt, or /etc on the host. The new mount on /usr, /opt, or /etc will then propagate into every service. This works cleanly the first time. However, when the system is updated multiple times it becomes necessary to unmount the first update on /opt, /usr, /etc and then propagate the new update. But this means, there's an interval where the old base system is accessible. This has to be avoided to protect against downgrade attacks. The vfs already exposes a mechanism to userspace whereby mounts can be mounted beneath an existing mount. Such mounts are internally referred to as "tucked". The patch series exposes the ability to mount beneath a top mount through the new MOVE_MOUNT_BENEATH flag for the move_mount() system call. This allows userspace to seamlessly upgrade mounts. After this series the only thing that will have changed is that mounting beneath an existing mount can be done explicitly instead of just implicitly. Today, there are two scenarios where a mount can be mounted beneath an existing mount instead of on top of it: (1) When a service or container is started in a new mount namespace and pivot_root()s into its new rootfs. The way this is done is by mounting the new rootfs beneath the old rootfs: fd_newroot = open("/var/lib/machines/fedora", ...); fd_oldroot = open("/", ...); fchdir(fd_newroot); pivot_root(".", "."); After the pivot_root(".", ".") call the new rootfs is mounted beneath the old rootfs which can then be unmounted to reveal the underlying mount: fchdir(fd_oldroot); umount2(".", MNT_DETACH); Since pivot_root() moves the caller into a new rootfs no mounts must be propagated out of the new rootfs as a consequence of the pivot_root() call. Thus, the mounts cannot be shared. (2) When a mount is propagated to a mount that already has another mount mounted on the same dentry. The easiest example for this is to create a new mount namespace. The following commands will create a mount namespace where the rootfs mount / will be a slave to the peer group of the host rootfs / mount's peer group. IOW, it will receive propagation from the host: mount --make-shared / unshare --mount --propagation=slave Now a new mount on the /mnt dentry in that mount namespace is created. (As it can be confusing it should be spelled out that the tmpfs mount on the /mnt dentry that was just created doesn't propagate back to the host because the rootfs mount / of the mount namespace isn't a peer of the host rootfs.): mount -t tmpfs tmpfs /mnt TARGET SOURCE FSTYPE PROPAGATION └─/mnt tmpfs tmpfs Now another terminal in the host mount namespace can observe that the mount indeed hasn't propagated back to into the host mount namespace. A new mount can now be created on top of the /mnt dentry with the rootfs mount / as its parent: mount --bind /opt /mnt TARGET SOURCE FSTYPE PROPAGATION └─/mnt /dev/sda2[/opt] ext4 shared:1 The mount namespace that was created earlier can now observe that the bind mount created on the host has propagated into it: TARGET SOURCE FSTYPE PROPAGATION └─/mnt /dev/sda2[/opt] ext4 master:1 └─/mnt tmpfs tmpfs But instead of having been mounted on top of the tmpfs mount at the /mnt dentry the /opt mount has been mounted on top of the rootfs mount at the /mnt dentry. And the tmpfs mount has been remounted on top of the propagated /opt mount at the /opt dentry. So in other words, the propagated mount has been mounted beneath the preexisting mount in that mount namespace. Mount namespaces make this easy to illustrate but it's also easy to mount beneath an existing mount in the same mount namespace (The following example assumes a shared rootfs mount / with peer group id 1): mount --bind /opt /opt TARGET SOURCE FSTYPE MNT_ID PARENT_ID PROPAGATION └─/opt /dev/sda2[/opt] ext4 188 29 shared:1 If another mount is mounted on top of the /opt mount at the /opt dentry: mount --bind /tmp /opt The following clunky mount tree will result: TARGET SOURCE FSTYPE MNT_ID PARENT_ID PROPAGATION └─/opt /dev/sda2[/tmp] ext4 405 29 shared:1 └─/opt /dev/sda2[/opt] ext4 188 405 shared:1 └─/opt /dev/sda2[/tmp] ext4 404 188 shared:1 The /tmp mount is mounted beneath the /opt mount and another copy is mounted on top of the /opt mount. This happens because the rootfs / and the /opt mount are shared mounts in the same peer group. When the new /tmp mount is supposed to be mounted at the /opt dentry then the /tmp mount first propagates to the root mount at the /opt dentry. But there already is the /opt mount mounted at the /opt dentry. So the old /opt mount at the /opt dentry will be mounted on top of the new /tmp mount at the /tmp dentry, i.e. @opt->mnt_parent is @tmp and @opt->mnt_mountpoint is /tmp (Note that @opt->mnt_root is /opt which is what shows up as /opt under SOURCE). So again, a mount will be mounted beneath a preexisting mount. (Fwiw, a few iterations of mount --bind /opt /opt in a loop on a shared rootfs is a good example of what could be referred to as mount explosion.) The main point is that such mounts allows userspace to umount a top mount and reveal an underlying mount. So for example, umounting the tmpfs mount on /mnt that was created in example (1) using mount namespaces reveals the /opt mount which was mounted beneath it. In (2) where a mount was mounted beneath the top mount in the same mount namespace unmounting the top mount would unmount both the top mount and the mount beneath. In the process the original mount would be remounted on top of the rootfs mount / at the /opt dentry again. This again, is a result of mount propagation only this time it's umount propagation. However, this can be avoided by simply making the parent mount / of the @opt mount a private or slave mount. Then the top mount and the original mount can be unmounted to reveal the mount beneath. These two examples are fairly arcane and are merely added to make it clear how mount propagation has effects on current and future features. More common use-cases will just be things like: mount -t btrfs /dev/sdA /mnt mount -t xfs /dev/sdB --beneath /mnt umount /mnt after which we'll have updated from a btrfs filesystem to a xfs filesystem without ever revealing the underlying mountpoint. The crux is that the proposed mechanism already exists and that it is so powerful as to cover cases where mounts are supposed to be updated with new versions. Crucially, it offers an important flexibility. Namely that updates to a system may either be forced or can be delayed and the umount of the top mount be left to a service if it is a cooperative one. This adds a new flag to move_mount() that allows to explicitly move a beneath the top mount adhering to the following semantics: * Mounts cannot be mounted beneath the rootfs. This restriction encompasses the rootfs but also chroots via chroot() and pivot_root(). To mount a mount beneath the rootfs or a chroot, pivot_root() can be used as illustrated above. * The source mount must be a private mount to force the kernel to allocate a new, unused peer group id. This isn't a required restriction but a voluntary one. It avoids repeating a semantical quirk that already exists today. If bind mounts which already have a peer group id are inserted into mount trees that have the same peer group id this can cause a lot of mount propagation events to be generated (For example, consider running mount --bind /opt /opt in a loop where the parent mount is a shared mount.). * Avoid getting rid of the top mount in the kernel. Cooperative services need to be able to unmount the top mount themselves. This also avoids a good deal of additional complexity. The umount would have to be propagated which would be another rather expensive operation. So namespace_lock() and lock_mount_hash() would potentially have to be held for a long time for both a mount and umount propagation. That should be avoided. * The path to mount beneath must be mounted and attached. * The top mount and its parent must be in the caller's mount namespace and the caller must be able to mount in that mount namespace. * The caller must be able to unmount the top mount to prove that they could reveal the underlying mount. * The propagation tree is calculated based on the destination mount's parent mount and the destination mount's mountpoint on the parent mount. Of course, if the parent of the destination mount and the destination mount are shared mounts in the same peer group and the mountpoint of the new mount to be mounted is a subdir of their ->mnt_root then both will receive a mount of /opt. That's probably easier to understand with an example. Assuming a standard shared rootfs /: mount --bind /opt /opt mount --bind /tmp /opt will cause the same mount tree as: mount --bind /opt /opt mount --beneath /tmp /opt because both / and /opt are shared mounts/peers in the same peer group and the /opt dentry is a subdirectory of both the parent's and the child's ->mnt_root. If a mount tree like that is created it almost always is an accident or abuse of mount propagation. Realistically what most people probably mean in this scenarios is: mount --bind /opt /opt mount --make-private /opt mount --make-shared /opt This forces the allocation of a new separate peer group for the /opt mount. Aferwards a mount --bind or mount --beneath actually makes sense as the / and /opt mount belong to different peer groups. Before that it's likely just confusion about what the user wanted to achieve. * Refuse MOVE_MOUNT_BENEATH if: (1) the @mnt_from has been overmounted in between path resolution and acquiring @namespace_sem when locking @mnt_to. This avoids the proliferation of shadow mounts. (2) if @to_mnt is moved to a different mountpoint while acquiring @namespace_sem to lock @to_mnt. (3) if @to_mnt is unmounted while acquiring @namespace_sem to lock @to_mnt. (4) if the parent of the target mount propagates to the target mount at the same mountpoint. This would mean mounting @mnt_from on @mnt_to->mnt_parent and then propagating a copy @c of @mnt_from onto @mnt_to. This defeats the whole purpose of mounting @mnt_from beneath @mnt_to. (5) if the parent mount @mnt_to->mnt_parent propagates to @mnt_from at the same mountpoint. If @mnt_to->mnt_parent propagates to @mnt_from this would mean propagating a copy @c of @mnt_from on top of @mnt_from. Afterwards @mnt_from would be mounted on top of @mnt_to->mnt_parent and @mnt_to would be unmounted from @mnt->mnt_parent and remounted on @mnt_from. But since @c is already mounted on @mnt_from, @mnt_to would ultimately be remounted on top of @c. Afterwards, @mnt_from would be covered by a copy @c of @mnt_from and @c would be covered by @mnt_from itself. This defeats the whole purpose of mounting @mnt_from beneath @mnt_to. Cases (1) to (3) are required as they deal with races that would cause bugs or unexpected behavior for users. Cases (4) and (5) refuse semantical quirks that would not be a bug but would cause weird mount trees to be created. While they can already be created via other means (mount --bind /opt /opt x n) there's no reason to repeat past mistakes in new features. Link: https://man7.org/linux/man-pages/man8/systemd-sysext.8.html [1] Link: https://brauner.io/2023/02/28/mounting-into-mount-namespaces.html [2] Link: https://github.com/flatcar/sysext-bakery Link: https://fedoraproject.org/wiki/Changes/Unified_Kernel_Support_Phase_1 Link: https://fedoraproject.org/wiki/Changes/Unified_Kernel_Support_Phase_2 Link: https://github.com/systemd/systemd/pull/26013 Reviewed-by: Seth Forshee (DigitalOcean) <sforshee@kernel.org> Message-Id: <20230202-fs-move-mount-replace-v4-4-98f3d80d7eaa@kernel.org> Signed-off-by: Christian Brauner <brauner@kernel.org>
2023-05-03 11:18:42 +00:00
if (beneath)
dest_mnt = top_mnt->mnt_parent;
else
dest_mnt = top_mnt;
if (IS_MNT_SHARED(dest_mnt)) {
err = invent_group_ids(source_mnt, true);
if (err)
goto out;
err = propagate_mnt(dest_mnt, dest_mp, source_mnt, &tree_list);
fs: allow to mount beneath top mount Various distributions are adding or are in the process of adding support for system extensions and in the future configuration extensions through various tools. A more detailed explanation on system and configuration extensions can be found on the manpage which is listed below at [1]. System extension images may – dynamically at runtime — extend the /usr/ and /opt/ directory hierarchies with additional files. This is particularly useful on immutable system images where a /usr/ and/or /opt/ hierarchy residing on a read-only file system shall be extended temporarily at runtime without making any persistent modifications. When one or more system extension images are activated, their /usr/ and /opt/ hierarchies are combined via overlayfs with the same hierarchies of the host OS, and the host /usr/ and /opt/ overmounted with it ("merging"). When they are deactivated, the mount point is disassembled — again revealing the unmodified original host version of the hierarchy ("unmerging"). Merging thus makes the extension's resources suddenly appear below the /usr/ and /opt/ hierarchies as if they were included in the base OS image itself. Unmerging makes them disappear again, leaving in place only the files that were shipped with the base OS image itself. System configuration images are similar but operate on directories containing system or service configuration. On nearly all modern distributions mount propagation plays a crucial role and the rootfs of the OS is a shared mount in a peer group (usually with peer group id 1): TARGET SOURCE FSTYPE PROPAGATION MNT_ID PARENT_ID / / ext4 shared:1 29 1 On such systems all services and containers run in a separate mount namespace and are pivot_root()ed into their rootfs. A separate mount namespace is almost always used as it is the minimal isolation mechanism services have. But usually they are even much more isolated up to the point where they almost become indistinguishable from containers. Mount propagation again plays a crucial role here. The rootfs of all these services is a slave mount to the peer group of the host rootfs. This is done so the service will receive mount propagation events from the host when certain files or directories are updated. In addition, the rootfs of each service, container, and sandbox is also a shared mount in its separate peer group: TARGET SOURCE FSTYPE PROPAGATION MNT_ID PARENT_ID / / ext4 shared:24 master:1 71 47 For people not too familiar with mount propagation, the master:1 means that this is a slave mount to peer group 1. Which as one can see is the host rootfs as indicated by shared:1 above. The shared:24 indicates that the service rootfs is a shared mount in a separate peer group with peer group id 24. A service may run other services. Such nested services will also have a rootfs mount that is a slave to the peer group of the outer service rootfs mount. For containers things are just slighly different. A container's rootfs isn't a slave to the service's or host rootfs' peer group. The rootfs mount of a container is simply a shared mount in its own peer group: TARGET SOURCE FSTYPE PROPAGATION MNT_ID PARENT_ID /home/ubuntu/debian-tree / ext4 shared:99 61 60 So whereas services are isolated OS components a container is treated like a separate world and mount propagation into it is restricted to a single well known mount that is a slave to the peer group of the shared mount /run on the host: TARGET SOURCE FSTYPE PROPAGATION MNT_ID PARENT_ID /propagate/debian-tree /run/host/incoming tmpfs master:5 71 68 Here, the master:5 indicates that this mount is a slave to the peer group with peer group id 5. This allows to propagate mounts into the container and served as a workaround for not being able to insert mounts into mount namespaces directly. But the new mount api does support inserting mounts directly. For the interested reader the blogpost in [2] might be worth reading where I explain the old and the new approach to inserting mounts into mount namespaces. Containers of course, can themselves be run as services. They often run full systems themselves which means they again run services and containers with the exact same propagation settings explained above. The whole system is designed so that it can be easily updated, including all services in various fine-grained ways without having to enter every single service's mount namespace which would be prohibitively expensive. The mount propagation layout has been carefully chosen so it is possible to propagate updates for system extensions and configurations from the host into all services. The simplest model to update the whole system is to mount on top of /usr, /opt, or /etc on the host. The new mount on /usr, /opt, or /etc will then propagate into every service. This works cleanly the first time. However, when the system is updated multiple times it becomes necessary to unmount the first update on /opt, /usr, /etc and then propagate the new update. But this means, there's an interval where the old base system is accessible. This has to be avoided to protect against downgrade attacks. The vfs already exposes a mechanism to userspace whereby mounts can be mounted beneath an existing mount. Such mounts are internally referred to as "tucked". The patch series exposes the ability to mount beneath a top mount through the new MOVE_MOUNT_BENEATH flag for the move_mount() system call. This allows userspace to seamlessly upgrade mounts. After this series the only thing that will have changed is that mounting beneath an existing mount can be done explicitly instead of just implicitly. Today, there are two scenarios where a mount can be mounted beneath an existing mount instead of on top of it: (1) When a service or container is started in a new mount namespace and pivot_root()s into its new rootfs. The way this is done is by mounting the new rootfs beneath the old rootfs: fd_newroot = open("/var/lib/machines/fedora", ...); fd_oldroot = open("/", ...); fchdir(fd_newroot); pivot_root(".", "."); After the pivot_root(".", ".") call the new rootfs is mounted beneath the old rootfs which can then be unmounted to reveal the underlying mount: fchdir(fd_oldroot); umount2(".", MNT_DETACH); Since pivot_root() moves the caller into a new rootfs no mounts must be propagated out of the new rootfs as a consequence of the pivot_root() call. Thus, the mounts cannot be shared. (2) When a mount is propagated to a mount that already has another mount mounted on the same dentry. The easiest example for this is to create a new mount namespace. The following commands will create a mount namespace where the rootfs mount / will be a slave to the peer group of the host rootfs / mount's peer group. IOW, it will receive propagation from the host: mount --make-shared / unshare --mount --propagation=slave Now a new mount on the /mnt dentry in that mount namespace is created. (As it can be confusing it should be spelled out that the tmpfs mount on the /mnt dentry that was just created doesn't propagate back to the host because the rootfs mount / of the mount namespace isn't a peer of the host rootfs.): mount -t tmpfs tmpfs /mnt TARGET SOURCE FSTYPE PROPAGATION └─/mnt tmpfs tmpfs Now another terminal in the host mount namespace can observe that the mount indeed hasn't propagated back to into the host mount namespace. A new mount can now be created on top of the /mnt dentry with the rootfs mount / as its parent: mount --bind /opt /mnt TARGET SOURCE FSTYPE PROPAGATION └─/mnt /dev/sda2[/opt] ext4 shared:1 The mount namespace that was created earlier can now observe that the bind mount created on the host has propagated into it: TARGET SOURCE FSTYPE PROPAGATION └─/mnt /dev/sda2[/opt] ext4 master:1 └─/mnt tmpfs tmpfs But instead of having been mounted on top of the tmpfs mount at the /mnt dentry the /opt mount has been mounted on top of the rootfs mount at the /mnt dentry. And the tmpfs mount has been remounted on top of the propagated /opt mount at the /opt dentry. So in other words, the propagated mount has been mounted beneath the preexisting mount in that mount namespace. Mount namespaces make this easy to illustrate but it's also easy to mount beneath an existing mount in the same mount namespace (The following example assumes a shared rootfs mount / with peer group id 1): mount --bind /opt /opt TARGET SOURCE FSTYPE MNT_ID PARENT_ID PROPAGATION └─/opt /dev/sda2[/opt] ext4 188 29 shared:1 If another mount is mounted on top of the /opt mount at the /opt dentry: mount --bind /tmp /opt The following clunky mount tree will result: TARGET SOURCE FSTYPE MNT_ID PARENT_ID PROPAGATION └─/opt /dev/sda2[/tmp] ext4 405 29 shared:1 └─/opt /dev/sda2[/opt] ext4 188 405 shared:1 └─/opt /dev/sda2[/tmp] ext4 404 188 shared:1 The /tmp mount is mounted beneath the /opt mount and another copy is mounted on top of the /opt mount. This happens because the rootfs / and the /opt mount are shared mounts in the same peer group. When the new /tmp mount is supposed to be mounted at the /opt dentry then the /tmp mount first propagates to the root mount at the /opt dentry. But there already is the /opt mount mounted at the /opt dentry. So the old /opt mount at the /opt dentry will be mounted on top of the new /tmp mount at the /tmp dentry, i.e. @opt->mnt_parent is @tmp and @opt->mnt_mountpoint is /tmp (Note that @opt->mnt_root is /opt which is what shows up as /opt under SOURCE). So again, a mount will be mounted beneath a preexisting mount. (Fwiw, a few iterations of mount --bind /opt /opt in a loop on a shared rootfs is a good example of what could be referred to as mount explosion.) The main point is that such mounts allows userspace to umount a top mount and reveal an underlying mount. So for example, umounting the tmpfs mount on /mnt that was created in example (1) using mount namespaces reveals the /opt mount which was mounted beneath it. In (2) where a mount was mounted beneath the top mount in the same mount namespace unmounting the top mount would unmount both the top mount and the mount beneath. In the process the original mount would be remounted on top of the rootfs mount / at the /opt dentry again. This again, is a result of mount propagation only this time it's umount propagation. However, this can be avoided by simply making the parent mount / of the @opt mount a private or slave mount. Then the top mount and the original mount can be unmounted to reveal the mount beneath. These two examples are fairly arcane and are merely added to make it clear how mount propagation has effects on current and future features. More common use-cases will just be things like: mount -t btrfs /dev/sdA /mnt mount -t xfs /dev/sdB --beneath /mnt umount /mnt after which we'll have updated from a btrfs filesystem to a xfs filesystem without ever revealing the underlying mountpoint. The crux is that the proposed mechanism already exists and that it is so powerful as to cover cases where mounts are supposed to be updated with new versions. Crucially, it offers an important flexibility. Namely that updates to a system may either be forced or can be delayed and the umount of the top mount be left to a service if it is a cooperative one. This adds a new flag to move_mount() that allows to explicitly move a beneath the top mount adhering to the following semantics: * Mounts cannot be mounted beneath the rootfs. This restriction encompasses the rootfs but also chroots via chroot() and pivot_root(). To mount a mount beneath the rootfs or a chroot, pivot_root() can be used as illustrated above. * The source mount must be a private mount to force the kernel to allocate a new, unused peer group id. This isn't a required restriction but a voluntary one. It avoids repeating a semantical quirk that already exists today. If bind mounts which already have a peer group id are inserted into mount trees that have the same peer group id this can cause a lot of mount propagation events to be generated (For example, consider running mount --bind /opt /opt in a loop where the parent mount is a shared mount.). * Avoid getting rid of the top mount in the kernel. Cooperative services need to be able to unmount the top mount themselves. This also avoids a good deal of additional complexity. The umount would have to be propagated which would be another rather expensive operation. So namespace_lock() and lock_mount_hash() would potentially have to be held for a long time for both a mount and umount propagation. That should be avoided. * The path to mount beneath must be mounted and attached. * The top mount and its parent must be in the caller's mount namespace and the caller must be able to mount in that mount namespace. * The caller must be able to unmount the top mount to prove that they could reveal the underlying mount. * The propagation tree is calculated based on the destination mount's parent mount and the destination mount's mountpoint on the parent mount. Of course, if the parent of the destination mount and the destination mount are shared mounts in the same peer group and the mountpoint of the new mount to be mounted is a subdir of their ->mnt_root then both will receive a mount of /opt. That's probably easier to understand with an example. Assuming a standard shared rootfs /: mount --bind /opt /opt mount --bind /tmp /opt will cause the same mount tree as: mount --bind /opt /opt mount --beneath /tmp /opt because both / and /opt are shared mounts/peers in the same peer group and the /opt dentry is a subdirectory of both the parent's and the child's ->mnt_root. If a mount tree like that is created it almost always is an accident or abuse of mount propagation. Realistically what most people probably mean in this scenarios is: mount --bind /opt /opt mount --make-private /opt mount --make-shared /opt This forces the allocation of a new separate peer group for the /opt mount. Aferwards a mount --bind or mount --beneath actually makes sense as the / and /opt mount belong to different peer groups. Before that it's likely just confusion about what the user wanted to achieve. * Refuse MOVE_MOUNT_BENEATH if: (1) the @mnt_from has been overmounted in between path resolution and acquiring @namespace_sem when locking @mnt_to. This avoids the proliferation of shadow mounts. (2) if @to_mnt is moved to a different mountpoint while acquiring @namespace_sem to lock @to_mnt. (3) if @to_mnt is unmounted while acquiring @namespace_sem to lock @to_mnt. (4) if the parent of the target mount propagates to the target mount at the same mountpoint. This would mean mounting @mnt_from on @mnt_to->mnt_parent and then propagating a copy @c of @mnt_from onto @mnt_to. This defeats the whole purpose of mounting @mnt_from beneath @mnt_to. (5) if the parent mount @mnt_to->mnt_parent propagates to @mnt_from at the same mountpoint. If @mnt_to->mnt_parent propagates to @mnt_from this would mean propagating a copy @c of @mnt_from on top of @mnt_from. Afterwards @mnt_from would be mounted on top of @mnt_to->mnt_parent and @mnt_to would be unmounted from @mnt->mnt_parent and remounted on @mnt_from. But since @c is already mounted on @mnt_from, @mnt_to would ultimately be remounted on top of @c. Afterwards, @mnt_from would be covered by a copy @c of @mnt_from and @c would be covered by @mnt_from itself. This defeats the whole purpose of mounting @mnt_from beneath @mnt_to. Cases (1) to (3) are required as they deal with races that would cause bugs or unexpected behavior for users. Cases (4) and (5) refuse semantical quirks that would not be a bug but would cause weird mount trees to be created. While they can already be created via other means (mount --bind /opt /opt x n) there's no reason to repeat past mistakes in new features. Link: https://man7.org/linux/man-pages/man8/systemd-sysext.8.html [1] Link: https://brauner.io/2023/02/28/mounting-into-mount-namespaces.html [2] Link: https://github.com/flatcar/sysext-bakery Link: https://fedoraproject.org/wiki/Changes/Unified_Kernel_Support_Phase_1 Link: https://fedoraproject.org/wiki/Changes/Unified_Kernel_Support_Phase_2 Link: https://github.com/systemd/systemd/pull/26013 Reviewed-by: Seth Forshee (DigitalOcean) <sforshee@kernel.org> Message-Id: <20230202-fs-move-mount-replace-v4-4-98f3d80d7eaa@kernel.org> Signed-off-by: Christian Brauner <brauner@kernel.org>
2023-05-03 11:18:42 +00:00
}
lock_mount_hash();
if (err)
goto out_cleanup_ids;
if (IS_MNT_SHARED(dest_mnt)) {
for (p = source_mnt; p; p = next_mnt(p, source_mnt))
set_mnt_shared(p);
}
fs: allow to mount beneath top mount Various distributions are adding or are in the process of adding support for system extensions and in the future configuration extensions through various tools. A more detailed explanation on system and configuration extensions can be found on the manpage which is listed below at [1]. System extension images may – dynamically at runtime — extend the /usr/ and /opt/ directory hierarchies with additional files. This is particularly useful on immutable system images where a /usr/ and/or /opt/ hierarchy residing on a read-only file system shall be extended temporarily at runtime without making any persistent modifications. When one or more system extension images are activated, their /usr/ and /opt/ hierarchies are combined via overlayfs with the same hierarchies of the host OS, and the host /usr/ and /opt/ overmounted with it ("merging"). When they are deactivated, the mount point is disassembled — again revealing the unmodified original host version of the hierarchy ("unmerging"). Merging thus makes the extension's resources suddenly appear below the /usr/ and /opt/ hierarchies as if they were included in the base OS image itself. Unmerging makes them disappear again, leaving in place only the files that were shipped with the base OS image itself. System configuration images are similar but operate on directories containing system or service configuration. On nearly all modern distributions mount propagation plays a crucial role and the rootfs of the OS is a shared mount in a peer group (usually with peer group id 1): TARGET SOURCE FSTYPE PROPAGATION MNT_ID PARENT_ID / / ext4 shared:1 29 1 On such systems all services and containers run in a separate mount namespace and are pivot_root()ed into their rootfs. A separate mount namespace is almost always used as it is the minimal isolation mechanism services have. But usually they are even much more isolated up to the point where they almost become indistinguishable from containers. Mount propagation again plays a crucial role here. The rootfs of all these services is a slave mount to the peer group of the host rootfs. This is done so the service will receive mount propagation events from the host when certain files or directories are updated. In addition, the rootfs of each service, container, and sandbox is also a shared mount in its separate peer group: TARGET SOURCE FSTYPE PROPAGATION MNT_ID PARENT_ID / / ext4 shared:24 master:1 71 47 For people not too familiar with mount propagation, the master:1 means that this is a slave mount to peer group 1. Which as one can see is the host rootfs as indicated by shared:1 above. The shared:24 indicates that the service rootfs is a shared mount in a separate peer group with peer group id 24. A service may run other services. Such nested services will also have a rootfs mount that is a slave to the peer group of the outer service rootfs mount. For containers things are just slighly different. A container's rootfs isn't a slave to the service's or host rootfs' peer group. The rootfs mount of a container is simply a shared mount in its own peer group: TARGET SOURCE FSTYPE PROPAGATION MNT_ID PARENT_ID /home/ubuntu/debian-tree / ext4 shared:99 61 60 So whereas services are isolated OS components a container is treated like a separate world and mount propagation into it is restricted to a single well known mount that is a slave to the peer group of the shared mount /run on the host: TARGET SOURCE FSTYPE PROPAGATION MNT_ID PARENT_ID /propagate/debian-tree /run/host/incoming tmpfs master:5 71 68 Here, the master:5 indicates that this mount is a slave to the peer group with peer group id 5. This allows to propagate mounts into the container and served as a workaround for not being able to insert mounts into mount namespaces directly. But the new mount api does support inserting mounts directly. For the interested reader the blogpost in [2] might be worth reading where I explain the old and the new approach to inserting mounts into mount namespaces. Containers of course, can themselves be run as services. They often run full systems themselves which means they again run services and containers with the exact same propagation settings explained above. The whole system is designed so that it can be easily updated, including all services in various fine-grained ways without having to enter every single service's mount namespace which would be prohibitively expensive. The mount propagation layout has been carefully chosen so it is possible to propagate updates for system extensions and configurations from the host into all services. The simplest model to update the whole system is to mount on top of /usr, /opt, or /etc on the host. The new mount on /usr, /opt, or /etc will then propagate into every service. This works cleanly the first time. However, when the system is updated multiple times it becomes necessary to unmount the first update on /opt, /usr, /etc and then propagate the new update. But this means, there's an interval where the old base system is accessible. This has to be avoided to protect against downgrade attacks. The vfs already exposes a mechanism to userspace whereby mounts can be mounted beneath an existing mount. Such mounts are internally referred to as "tucked". The patch series exposes the ability to mount beneath a top mount through the new MOVE_MOUNT_BENEATH flag for the move_mount() system call. This allows userspace to seamlessly upgrade mounts. After this series the only thing that will have changed is that mounting beneath an existing mount can be done explicitly instead of just implicitly. Today, there are two scenarios where a mount can be mounted beneath an existing mount instead of on top of it: (1) When a service or container is started in a new mount namespace and pivot_root()s into its new rootfs. The way this is done is by mounting the new rootfs beneath the old rootfs: fd_newroot = open("/var/lib/machines/fedora", ...); fd_oldroot = open("/", ...); fchdir(fd_newroot); pivot_root(".", "."); After the pivot_root(".", ".") call the new rootfs is mounted beneath the old rootfs which can then be unmounted to reveal the underlying mount: fchdir(fd_oldroot); umount2(".", MNT_DETACH); Since pivot_root() moves the caller into a new rootfs no mounts must be propagated out of the new rootfs as a consequence of the pivot_root() call. Thus, the mounts cannot be shared. (2) When a mount is propagated to a mount that already has another mount mounted on the same dentry. The easiest example for this is to create a new mount namespace. The following commands will create a mount namespace where the rootfs mount / will be a slave to the peer group of the host rootfs / mount's peer group. IOW, it will receive propagation from the host: mount --make-shared / unshare --mount --propagation=slave Now a new mount on the /mnt dentry in that mount namespace is created. (As it can be confusing it should be spelled out that the tmpfs mount on the /mnt dentry that was just created doesn't propagate back to the host because the rootfs mount / of the mount namespace isn't a peer of the host rootfs.): mount -t tmpfs tmpfs /mnt TARGET SOURCE FSTYPE PROPAGATION └─/mnt tmpfs tmpfs Now another terminal in the host mount namespace can observe that the mount indeed hasn't propagated back to into the host mount namespace. A new mount can now be created on top of the /mnt dentry with the rootfs mount / as its parent: mount --bind /opt /mnt TARGET SOURCE FSTYPE PROPAGATION └─/mnt /dev/sda2[/opt] ext4 shared:1 The mount namespace that was created earlier can now observe that the bind mount created on the host has propagated into it: TARGET SOURCE FSTYPE PROPAGATION └─/mnt /dev/sda2[/opt] ext4 master:1 └─/mnt tmpfs tmpfs But instead of having been mounted on top of the tmpfs mount at the /mnt dentry the /opt mount has been mounted on top of the rootfs mount at the /mnt dentry. And the tmpfs mount has been remounted on top of the propagated /opt mount at the /opt dentry. So in other words, the propagated mount has been mounted beneath the preexisting mount in that mount namespace. Mount namespaces make this easy to illustrate but it's also easy to mount beneath an existing mount in the same mount namespace (The following example assumes a shared rootfs mount / with peer group id 1): mount --bind /opt /opt TARGET SOURCE FSTYPE MNT_ID PARENT_ID PROPAGATION └─/opt /dev/sda2[/opt] ext4 188 29 shared:1 If another mount is mounted on top of the /opt mount at the /opt dentry: mount --bind /tmp /opt The following clunky mount tree will result: TARGET SOURCE FSTYPE MNT_ID PARENT_ID PROPAGATION └─/opt /dev/sda2[/tmp] ext4 405 29 shared:1 └─/opt /dev/sda2[/opt] ext4 188 405 shared:1 └─/opt /dev/sda2[/tmp] ext4 404 188 shared:1 The /tmp mount is mounted beneath the /opt mount and another copy is mounted on top of the /opt mount. This happens because the rootfs / and the /opt mount are shared mounts in the same peer group. When the new /tmp mount is supposed to be mounted at the /opt dentry then the /tmp mount first propagates to the root mount at the /opt dentry. But there already is the /opt mount mounted at the /opt dentry. So the old /opt mount at the /opt dentry will be mounted on top of the new /tmp mount at the /tmp dentry, i.e. @opt->mnt_parent is @tmp and @opt->mnt_mountpoint is /tmp (Note that @opt->mnt_root is /opt which is what shows up as /opt under SOURCE). So again, a mount will be mounted beneath a preexisting mount. (Fwiw, a few iterations of mount --bind /opt /opt in a loop on a shared rootfs is a good example of what could be referred to as mount explosion.) The main point is that such mounts allows userspace to umount a top mount and reveal an underlying mount. So for example, umounting the tmpfs mount on /mnt that was created in example (1) using mount namespaces reveals the /opt mount which was mounted beneath it. In (2) where a mount was mounted beneath the top mount in the same mount namespace unmounting the top mount would unmount both the top mount and the mount beneath. In the process the original mount would be remounted on top of the rootfs mount / at the /opt dentry again. This again, is a result of mount propagation only this time it's umount propagation. However, this can be avoided by simply making the parent mount / of the @opt mount a private or slave mount. Then the top mount and the original mount can be unmounted to reveal the mount beneath. These two examples are fairly arcane and are merely added to make it clear how mount propagation has effects on current and future features. More common use-cases will just be things like: mount -t btrfs /dev/sdA /mnt mount -t xfs /dev/sdB --beneath /mnt umount /mnt after which we'll have updated from a btrfs filesystem to a xfs filesystem without ever revealing the underlying mountpoint. The crux is that the proposed mechanism already exists and that it is so powerful as to cover cases where mounts are supposed to be updated with new versions. Crucially, it offers an important flexibility. Namely that updates to a system may either be forced or can be delayed and the umount of the top mount be left to a service if it is a cooperative one. This adds a new flag to move_mount() that allows to explicitly move a beneath the top mount adhering to the following semantics: * Mounts cannot be mounted beneath the rootfs. This restriction encompasses the rootfs but also chroots via chroot() and pivot_root(). To mount a mount beneath the rootfs or a chroot, pivot_root() can be used as illustrated above. * The source mount must be a private mount to force the kernel to allocate a new, unused peer group id. This isn't a required restriction but a voluntary one. It avoids repeating a semantical quirk that already exists today. If bind mounts which already have a peer group id are inserted into mount trees that have the same peer group id this can cause a lot of mount propagation events to be generated (For example, consider running mount --bind /opt /opt in a loop where the parent mount is a shared mount.). * Avoid getting rid of the top mount in the kernel. Cooperative services need to be able to unmount the top mount themselves. This also avoids a good deal of additional complexity. The umount would have to be propagated which would be another rather expensive operation. So namespace_lock() and lock_mount_hash() would potentially have to be held for a long time for both a mount and umount propagation. That should be avoided. * The path to mount beneath must be mounted and attached. * The top mount and its parent must be in the caller's mount namespace and the caller must be able to mount in that mount namespace. * The caller must be able to unmount the top mount to prove that they could reveal the underlying mount. * The propagation tree is calculated based on the destination mount's parent mount and the destination mount's mountpoint on the parent mount. Of course, if the parent of the destination mount and the destination mount are shared mounts in the same peer group and the mountpoint of the new mount to be mounted is a subdir of their ->mnt_root then both will receive a mount of /opt. That's probably easier to understand with an example. Assuming a standard shared rootfs /: mount --bind /opt /opt mount --bind /tmp /opt will cause the same mount tree as: mount --bind /opt /opt mount --beneath /tmp /opt because both / and /opt are shared mounts/peers in the same peer group and the /opt dentry is a subdirectory of both the parent's and the child's ->mnt_root. If a mount tree like that is created it almost always is an accident or abuse of mount propagation. Realistically what most people probably mean in this scenarios is: mount --bind /opt /opt mount --make-private /opt mount --make-shared /opt This forces the allocation of a new separate peer group for the /opt mount. Aferwards a mount --bind or mount --beneath actually makes sense as the / and /opt mount belong to different peer groups. Before that it's likely just confusion about what the user wanted to achieve. * Refuse MOVE_MOUNT_BENEATH if: (1) the @mnt_from has been overmounted in between path resolution and acquiring @namespace_sem when locking @mnt_to. This avoids the proliferation of shadow mounts. (2) if @to_mnt is moved to a different mountpoint while acquiring @namespace_sem to lock @to_mnt. (3) if @to_mnt is unmounted while acquiring @namespace_sem to lock @to_mnt. (4) if the parent of the target mount propagates to the target mount at the same mountpoint. This would mean mounting @mnt_from on @mnt_to->mnt_parent and then propagating a copy @c of @mnt_from onto @mnt_to. This defeats the whole purpose of mounting @mnt_from beneath @mnt_to. (5) if the parent mount @mnt_to->mnt_parent propagates to @mnt_from at the same mountpoint. If @mnt_to->mnt_parent propagates to @mnt_from this would mean propagating a copy @c of @mnt_from on top of @mnt_from. Afterwards @mnt_from would be mounted on top of @mnt_to->mnt_parent and @mnt_to would be unmounted from @mnt->mnt_parent and remounted on @mnt_from. But since @c is already mounted on @mnt_from, @mnt_to would ultimately be remounted on top of @c. Afterwards, @mnt_from would be covered by a copy @c of @mnt_from and @c would be covered by @mnt_from itself. This defeats the whole purpose of mounting @mnt_from beneath @mnt_to. Cases (1) to (3) are required as they deal with races that would cause bugs or unexpected behavior for users. Cases (4) and (5) refuse semantical quirks that would not be a bug but would cause weird mount trees to be created. While they can already be created via other means (mount --bind /opt /opt x n) there's no reason to repeat past mistakes in new features. Link: https://man7.org/linux/man-pages/man8/systemd-sysext.8.html [1] Link: https://brauner.io/2023/02/28/mounting-into-mount-namespaces.html [2] Link: https://github.com/flatcar/sysext-bakery Link: https://fedoraproject.org/wiki/Changes/Unified_Kernel_Support_Phase_1 Link: https://fedoraproject.org/wiki/Changes/Unified_Kernel_Support_Phase_2 Link: https://github.com/systemd/systemd/pull/26013 Reviewed-by: Seth Forshee (DigitalOcean) <sforshee@kernel.org> Message-Id: <20230202-fs-move-mount-replace-v4-4-98f3d80d7eaa@kernel.org> Signed-off-by: Christian Brauner <brauner@kernel.org>
2023-05-03 11:18:42 +00:00
if (moving) {
fs: allow to mount beneath top mount Various distributions are adding or are in the process of adding support for system extensions and in the future configuration extensions through various tools. A more detailed explanation on system and configuration extensions can be found on the manpage which is listed below at [1]. System extension images may – dynamically at runtime — extend the /usr/ and /opt/ directory hierarchies with additional files. This is particularly useful on immutable system images where a /usr/ and/or /opt/ hierarchy residing on a read-only file system shall be extended temporarily at runtime without making any persistent modifications. When one or more system extension images are activated, their /usr/ and /opt/ hierarchies are combined via overlayfs with the same hierarchies of the host OS, and the host /usr/ and /opt/ overmounted with it ("merging"). When they are deactivated, the mount point is disassembled — again revealing the unmodified original host version of the hierarchy ("unmerging"). Merging thus makes the extension's resources suddenly appear below the /usr/ and /opt/ hierarchies as if they were included in the base OS image itself. Unmerging makes them disappear again, leaving in place only the files that were shipped with the base OS image itself. System configuration images are similar but operate on directories containing system or service configuration. On nearly all modern distributions mount propagation plays a crucial role and the rootfs of the OS is a shared mount in a peer group (usually with peer group id 1): TARGET SOURCE FSTYPE PROPAGATION MNT_ID PARENT_ID / / ext4 shared:1 29 1 On such systems all services and containers run in a separate mount namespace and are pivot_root()ed into their rootfs. A separate mount namespace is almost always used as it is the minimal isolation mechanism services have. But usually they are even much more isolated up to the point where they almost become indistinguishable from containers. Mount propagation again plays a crucial role here. The rootfs of all these services is a slave mount to the peer group of the host rootfs. This is done so the service will receive mount propagation events from the host when certain files or directories are updated. In addition, the rootfs of each service, container, and sandbox is also a shared mount in its separate peer group: TARGET SOURCE FSTYPE PROPAGATION MNT_ID PARENT_ID / / ext4 shared:24 master:1 71 47 For people not too familiar with mount propagation, the master:1 means that this is a slave mount to peer group 1. Which as one can see is the host rootfs as indicated by shared:1 above. The shared:24 indicates that the service rootfs is a shared mount in a separate peer group with peer group id 24. A service may run other services. Such nested services will also have a rootfs mount that is a slave to the peer group of the outer service rootfs mount. For containers things are just slighly different. A container's rootfs isn't a slave to the service's or host rootfs' peer group. The rootfs mount of a container is simply a shared mount in its own peer group: TARGET SOURCE FSTYPE PROPAGATION MNT_ID PARENT_ID /home/ubuntu/debian-tree / ext4 shared:99 61 60 So whereas services are isolated OS components a container is treated like a separate world and mount propagation into it is restricted to a single well known mount that is a slave to the peer group of the shared mount /run on the host: TARGET SOURCE FSTYPE PROPAGATION MNT_ID PARENT_ID /propagate/debian-tree /run/host/incoming tmpfs master:5 71 68 Here, the master:5 indicates that this mount is a slave to the peer group with peer group id 5. This allows to propagate mounts into the container and served as a workaround for not being able to insert mounts into mount namespaces directly. But the new mount api does support inserting mounts directly. For the interested reader the blogpost in [2] might be worth reading where I explain the old and the new approach to inserting mounts into mount namespaces. Containers of course, can themselves be run as services. They often run full systems themselves which means they again run services and containers with the exact same propagation settings explained above. The whole system is designed so that it can be easily updated, including all services in various fine-grained ways without having to enter every single service's mount namespace which would be prohibitively expensive. The mount propagation layout has been carefully chosen so it is possible to propagate updates for system extensions and configurations from the host into all services. The simplest model to update the whole system is to mount on top of /usr, /opt, or /etc on the host. The new mount on /usr, /opt, or /etc will then propagate into every service. This works cleanly the first time. However, when the system is updated multiple times it becomes necessary to unmount the first update on /opt, /usr, /etc and then propagate the new update. But this means, there's an interval where the old base system is accessible. This has to be avoided to protect against downgrade attacks. The vfs already exposes a mechanism to userspace whereby mounts can be mounted beneath an existing mount. Such mounts are internally referred to as "tucked". The patch series exposes the ability to mount beneath a top mount through the new MOVE_MOUNT_BENEATH flag for the move_mount() system call. This allows userspace to seamlessly upgrade mounts. After this series the only thing that will have changed is that mounting beneath an existing mount can be done explicitly instead of just implicitly. Today, there are two scenarios where a mount can be mounted beneath an existing mount instead of on top of it: (1) When a service or container is started in a new mount namespace and pivot_root()s into its new rootfs. The way this is done is by mounting the new rootfs beneath the old rootfs: fd_newroot = open("/var/lib/machines/fedora", ...); fd_oldroot = open("/", ...); fchdir(fd_newroot); pivot_root(".", "."); After the pivot_root(".", ".") call the new rootfs is mounted beneath the old rootfs which can then be unmounted to reveal the underlying mount: fchdir(fd_oldroot); umount2(".", MNT_DETACH); Since pivot_root() moves the caller into a new rootfs no mounts must be propagated out of the new rootfs as a consequence of the pivot_root() call. Thus, the mounts cannot be shared. (2) When a mount is propagated to a mount that already has another mount mounted on the same dentry. The easiest example for this is to create a new mount namespace. The following commands will create a mount namespace where the rootfs mount / will be a slave to the peer group of the host rootfs / mount's peer group. IOW, it will receive propagation from the host: mount --make-shared / unshare --mount --propagation=slave Now a new mount on the /mnt dentry in that mount namespace is created. (As it can be confusing it should be spelled out that the tmpfs mount on the /mnt dentry that was just created doesn't propagate back to the host because the rootfs mount / of the mount namespace isn't a peer of the host rootfs.): mount -t tmpfs tmpfs /mnt TARGET SOURCE FSTYPE PROPAGATION └─/mnt tmpfs tmpfs Now another terminal in the host mount namespace can observe that the mount indeed hasn't propagated back to into the host mount namespace. A new mount can now be created on top of the /mnt dentry with the rootfs mount / as its parent: mount --bind /opt /mnt TARGET SOURCE FSTYPE PROPAGATION └─/mnt /dev/sda2[/opt] ext4 shared:1 The mount namespace that was created earlier can now observe that the bind mount created on the host has propagated into it: TARGET SOURCE FSTYPE PROPAGATION └─/mnt /dev/sda2[/opt] ext4 master:1 └─/mnt tmpfs tmpfs But instead of having been mounted on top of the tmpfs mount at the /mnt dentry the /opt mount has been mounted on top of the rootfs mount at the /mnt dentry. And the tmpfs mount has been remounted on top of the propagated /opt mount at the /opt dentry. So in other words, the propagated mount has been mounted beneath the preexisting mount in that mount namespace. Mount namespaces make this easy to illustrate but it's also easy to mount beneath an existing mount in the same mount namespace (The following example assumes a shared rootfs mount / with peer group id 1): mount --bind /opt /opt TARGET SOURCE FSTYPE MNT_ID PARENT_ID PROPAGATION └─/opt /dev/sda2[/opt] ext4 188 29 shared:1 If another mount is mounted on top of the /opt mount at the /opt dentry: mount --bind /tmp /opt The following clunky mount tree will result: TARGET SOURCE FSTYPE MNT_ID PARENT_ID PROPAGATION └─/opt /dev/sda2[/tmp] ext4 405 29 shared:1 └─/opt /dev/sda2[/opt] ext4 188 405 shared:1 └─/opt /dev/sda2[/tmp] ext4 404 188 shared:1 The /tmp mount is mounted beneath the /opt mount and another copy is mounted on top of the /opt mount. This happens because the rootfs / and the /opt mount are shared mounts in the same peer group. When the new /tmp mount is supposed to be mounted at the /opt dentry then the /tmp mount first propagates to the root mount at the /opt dentry. But there already is the /opt mount mounted at the /opt dentry. So the old /opt mount at the /opt dentry will be mounted on top of the new /tmp mount at the /tmp dentry, i.e. @opt->mnt_parent is @tmp and @opt->mnt_mountpoint is /tmp (Note that @opt->mnt_root is /opt which is what shows up as /opt under SOURCE). So again, a mount will be mounted beneath a preexisting mount. (Fwiw, a few iterations of mount --bind /opt /opt in a loop on a shared rootfs is a good example of what could be referred to as mount explosion.) The main point is that such mounts allows userspace to umount a top mount and reveal an underlying mount. So for example, umounting the tmpfs mount on /mnt that was created in example (1) using mount namespaces reveals the /opt mount which was mounted beneath it. In (2) where a mount was mounted beneath the top mount in the same mount namespace unmounting the top mount would unmount both the top mount and the mount beneath. In the process the original mount would be remounted on top of the rootfs mount / at the /opt dentry again. This again, is a result of mount propagation only this time it's umount propagation. However, this can be avoided by simply making the parent mount / of the @opt mount a private or slave mount. Then the top mount and the original mount can be unmounted to reveal the mount beneath. These two examples are fairly arcane and are merely added to make it clear how mount propagation has effects on current and future features. More common use-cases will just be things like: mount -t btrfs /dev/sdA /mnt mount -t xfs /dev/sdB --beneath /mnt umount /mnt after which we'll have updated from a btrfs filesystem to a xfs filesystem without ever revealing the underlying mountpoint. The crux is that the proposed mechanism already exists and that it is so powerful as to cover cases where mounts are supposed to be updated with new versions. Crucially, it offers an important flexibility. Namely that updates to a system may either be forced or can be delayed and the umount of the top mount be left to a service if it is a cooperative one. This adds a new flag to move_mount() that allows to explicitly move a beneath the top mount adhering to the following semantics: * Mounts cannot be mounted beneath the rootfs. This restriction encompasses the rootfs but also chroots via chroot() and pivot_root(). To mount a mount beneath the rootfs or a chroot, pivot_root() can be used as illustrated above. * The source mount must be a private mount to force the kernel to allocate a new, unused peer group id. This isn't a required restriction but a voluntary one. It avoids repeating a semantical quirk that already exists today. If bind mounts which already have a peer group id are inserted into mount trees that have the same peer group id this can cause a lot of mount propagation events to be generated (For example, consider running mount --bind /opt /opt in a loop where the parent mount is a shared mount.). * Avoid getting rid of the top mount in the kernel. Cooperative services need to be able to unmount the top mount themselves. This also avoids a good deal of additional complexity. The umount would have to be propagated which would be another rather expensive operation. So namespace_lock() and lock_mount_hash() would potentially have to be held for a long time for both a mount and umount propagation. That should be avoided. * The path to mount beneath must be mounted and attached. * The top mount and its parent must be in the caller's mount namespace and the caller must be able to mount in that mount namespace. * The caller must be able to unmount the top mount to prove that they could reveal the underlying mount. * The propagation tree is calculated based on the destination mount's parent mount and the destination mount's mountpoint on the parent mount. Of course, if the parent of the destination mount and the destination mount are shared mounts in the same peer group and the mountpoint of the new mount to be mounted is a subdir of their ->mnt_root then both will receive a mount of /opt. That's probably easier to understand with an example. Assuming a standard shared rootfs /: mount --bind /opt /opt mount --bind /tmp /opt will cause the same mount tree as: mount --bind /opt /opt mount --beneath /tmp /opt because both / and /opt are shared mounts/peers in the same peer group and the /opt dentry is a subdirectory of both the parent's and the child's ->mnt_root. If a mount tree like that is created it almost always is an accident or abuse of mount propagation. Realistically what most people probably mean in this scenarios is: mount --bind /opt /opt mount --make-private /opt mount --make-shared /opt This forces the allocation of a new separate peer group for the /opt mount. Aferwards a mount --bind or mount --beneath actually makes sense as the / and /opt mount belong to different peer groups. Before that it's likely just confusion about what the user wanted to achieve. * Refuse MOVE_MOUNT_BENEATH if: (1) the @mnt_from has been overmounted in between path resolution and acquiring @namespace_sem when locking @mnt_to. This avoids the proliferation of shadow mounts. (2) if @to_mnt is moved to a different mountpoint while acquiring @namespace_sem to lock @to_mnt. (3) if @to_mnt is unmounted while acquiring @namespace_sem to lock @to_mnt. (4) if the parent of the target mount propagates to the target mount at the same mountpoint. This would mean mounting @mnt_from on @mnt_to->mnt_parent and then propagating a copy @c of @mnt_from onto @mnt_to. This defeats the whole purpose of mounting @mnt_from beneath @mnt_to. (5) if the parent mount @mnt_to->mnt_parent propagates to @mnt_from at the same mountpoint. If @mnt_to->mnt_parent propagates to @mnt_from this would mean propagating a copy @c of @mnt_from on top of @mnt_from. Afterwards @mnt_from would be mounted on top of @mnt_to->mnt_parent and @mnt_to would be unmounted from @mnt->mnt_parent and remounted on @mnt_from. But since @c is already mounted on @mnt_from, @mnt_to would ultimately be remounted on top of @c. Afterwards, @mnt_from would be covered by a copy @c of @mnt_from and @c would be covered by @mnt_from itself. This defeats the whole purpose of mounting @mnt_from beneath @mnt_to. Cases (1) to (3) are required as they deal with races that would cause bugs or unexpected behavior for users. Cases (4) and (5) refuse semantical quirks that would not be a bug but would cause weird mount trees to be created. While they can already be created via other means (mount --bind /opt /opt x n) there's no reason to repeat past mistakes in new features. Link: https://man7.org/linux/man-pages/man8/systemd-sysext.8.html [1] Link: https://brauner.io/2023/02/28/mounting-into-mount-namespaces.html [2] Link: https://github.com/flatcar/sysext-bakery Link: https://fedoraproject.org/wiki/Changes/Unified_Kernel_Support_Phase_1 Link: https://fedoraproject.org/wiki/Changes/Unified_Kernel_Support_Phase_2 Link: https://github.com/systemd/systemd/pull/26013 Reviewed-by: Seth Forshee (DigitalOcean) <sforshee@kernel.org> Message-Id: <20230202-fs-move-mount-replace-v4-4-98f3d80d7eaa@kernel.org> Signed-off-by: Christian Brauner <brauner@kernel.org>
2023-05-03 11:18:42 +00:00
if (beneath)
dest_mp = smp;
unhash_mnt(source_mnt);
fs: allow to mount beneath top mount Various distributions are adding or are in the process of adding support for system extensions and in the future configuration extensions through various tools. A more detailed explanation on system and configuration extensions can be found on the manpage which is listed below at [1]. System extension images may – dynamically at runtime — extend the /usr/ and /opt/ directory hierarchies with additional files. This is particularly useful on immutable system images where a /usr/ and/or /opt/ hierarchy residing on a read-only file system shall be extended temporarily at runtime without making any persistent modifications. When one or more system extension images are activated, their /usr/ and /opt/ hierarchies are combined via overlayfs with the same hierarchies of the host OS, and the host /usr/ and /opt/ overmounted with it ("merging"). When they are deactivated, the mount point is disassembled — again revealing the unmodified original host version of the hierarchy ("unmerging"). Merging thus makes the extension's resources suddenly appear below the /usr/ and /opt/ hierarchies as if they were included in the base OS image itself. Unmerging makes them disappear again, leaving in place only the files that were shipped with the base OS image itself. System configuration images are similar but operate on directories containing system or service configuration. On nearly all modern distributions mount propagation plays a crucial role and the rootfs of the OS is a shared mount in a peer group (usually with peer group id 1): TARGET SOURCE FSTYPE PROPAGATION MNT_ID PARENT_ID / / ext4 shared:1 29 1 On such systems all services and containers run in a separate mount namespace and are pivot_root()ed into their rootfs. A separate mount namespace is almost always used as it is the minimal isolation mechanism services have. But usually they are even much more isolated up to the point where they almost become indistinguishable from containers. Mount propagation again plays a crucial role here. The rootfs of all these services is a slave mount to the peer group of the host rootfs. This is done so the service will receive mount propagation events from the host when certain files or directories are updated. In addition, the rootfs of each service, container, and sandbox is also a shared mount in its separate peer group: TARGET SOURCE FSTYPE PROPAGATION MNT_ID PARENT_ID / / ext4 shared:24 master:1 71 47 For people not too familiar with mount propagation, the master:1 means that this is a slave mount to peer group 1. Which as one can see is the host rootfs as indicated by shared:1 above. The shared:24 indicates that the service rootfs is a shared mount in a separate peer group with peer group id 24. A service may run other services. Such nested services will also have a rootfs mount that is a slave to the peer group of the outer service rootfs mount. For containers things are just slighly different. A container's rootfs isn't a slave to the service's or host rootfs' peer group. The rootfs mount of a container is simply a shared mount in its own peer group: TARGET SOURCE FSTYPE PROPAGATION MNT_ID PARENT_ID /home/ubuntu/debian-tree / ext4 shared:99 61 60 So whereas services are isolated OS components a container is treated like a separate world and mount propagation into it is restricted to a single well known mount that is a slave to the peer group of the shared mount /run on the host: TARGET SOURCE FSTYPE PROPAGATION MNT_ID PARENT_ID /propagate/debian-tree /run/host/incoming tmpfs master:5 71 68 Here, the master:5 indicates that this mount is a slave to the peer group with peer group id 5. This allows to propagate mounts into the container and served as a workaround for not being able to insert mounts into mount namespaces directly. But the new mount api does support inserting mounts directly. For the interested reader the blogpost in [2] might be worth reading where I explain the old and the new approach to inserting mounts into mount namespaces. Containers of course, can themselves be run as services. They often run full systems themselves which means they again run services and containers with the exact same propagation settings explained above. The whole system is designed so that it can be easily updated, including all services in various fine-grained ways without having to enter every single service's mount namespace which would be prohibitively expensive. The mount propagation layout has been carefully chosen so it is possible to propagate updates for system extensions and configurations from the host into all services. The simplest model to update the whole system is to mount on top of /usr, /opt, or /etc on the host. The new mount on /usr, /opt, or /etc will then propagate into every service. This works cleanly the first time. However, when the system is updated multiple times it becomes necessary to unmount the first update on /opt, /usr, /etc and then propagate the new update. But this means, there's an interval where the old base system is accessible. This has to be avoided to protect against downgrade attacks. The vfs already exposes a mechanism to userspace whereby mounts can be mounted beneath an existing mount. Such mounts are internally referred to as "tucked". The patch series exposes the ability to mount beneath a top mount through the new MOVE_MOUNT_BENEATH flag for the move_mount() system call. This allows userspace to seamlessly upgrade mounts. After this series the only thing that will have changed is that mounting beneath an existing mount can be done explicitly instead of just implicitly. Today, there are two scenarios where a mount can be mounted beneath an existing mount instead of on top of it: (1) When a service or container is started in a new mount namespace and pivot_root()s into its new rootfs. The way this is done is by mounting the new rootfs beneath the old rootfs: fd_newroot = open("/var/lib/machines/fedora", ...); fd_oldroot = open("/", ...); fchdir(fd_newroot); pivot_root(".", "."); After the pivot_root(".", ".") call the new rootfs is mounted beneath the old rootfs which can then be unmounted to reveal the underlying mount: fchdir(fd_oldroot); umount2(".", MNT_DETACH); Since pivot_root() moves the caller into a new rootfs no mounts must be propagated out of the new rootfs as a consequence of the pivot_root() call. Thus, the mounts cannot be shared. (2) When a mount is propagated to a mount that already has another mount mounted on the same dentry. The easiest example for this is to create a new mount namespace. The following commands will create a mount namespace where the rootfs mount / will be a slave to the peer group of the host rootfs / mount's peer group. IOW, it will receive propagation from the host: mount --make-shared / unshare --mount --propagation=slave Now a new mount on the /mnt dentry in that mount namespace is created. (As it can be confusing it should be spelled out that the tmpfs mount on the /mnt dentry that was just created doesn't propagate back to the host because the rootfs mount / of the mount namespace isn't a peer of the host rootfs.): mount -t tmpfs tmpfs /mnt TARGET SOURCE FSTYPE PROPAGATION └─/mnt tmpfs tmpfs Now another terminal in the host mount namespace can observe that the mount indeed hasn't propagated back to into the host mount namespace. A new mount can now be created on top of the /mnt dentry with the rootfs mount / as its parent: mount --bind /opt /mnt TARGET SOURCE FSTYPE PROPAGATION └─/mnt /dev/sda2[/opt] ext4 shared:1 The mount namespace that was created earlier can now observe that the bind mount created on the host has propagated into it: TARGET SOURCE FSTYPE PROPAGATION └─/mnt /dev/sda2[/opt] ext4 master:1 └─/mnt tmpfs tmpfs But instead of having been mounted on top of the tmpfs mount at the /mnt dentry the /opt mount has been mounted on top of the rootfs mount at the /mnt dentry. And the tmpfs mount has been remounted on top of the propagated /opt mount at the /opt dentry. So in other words, the propagated mount has been mounted beneath the preexisting mount in that mount namespace. Mount namespaces make this easy to illustrate but it's also easy to mount beneath an existing mount in the same mount namespace (The following example assumes a shared rootfs mount / with peer group id 1): mount --bind /opt /opt TARGET SOURCE FSTYPE MNT_ID PARENT_ID PROPAGATION └─/opt /dev/sda2[/opt] ext4 188 29 shared:1 If another mount is mounted on top of the /opt mount at the /opt dentry: mount --bind /tmp /opt The following clunky mount tree will result: TARGET SOURCE FSTYPE MNT_ID PARENT_ID PROPAGATION └─/opt /dev/sda2[/tmp] ext4 405 29 shared:1 └─/opt /dev/sda2[/opt] ext4 188 405 shared:1 └─/opt /dev/sda2[/tmp] ext4 404 188 shared:1 The /tmp mount is mounted beneath the /opt mount and another copy is mounted on top of the /opt mount. This happens because the rootfs / and the /opt mount are shared mounts in the same peer group. When the new /tmp mount is supposed to be mounted at the /opt dentry then the /tmp mount first propagates to the root mount at the /opt dentry. But there already is the /opt mount mounted at the /opt dentry. So the old /opt mount at the /opt dentry will be mounted on top of the new /tmp mount at the /tmp dentry, i.e. @opt->mnt_parent is @tmp and @opt->mnt_mountpoint is /tmp (Note that @opt->mnt_root is /opt which is what shows up as /opt under SOURCE). So again, a mount will be mounted beneath a preexisting mount. (Fwiw, a few iterations of mount --bind /opt /opt in a loop on a shared rootfs is a good example of what could be referred to as mount explosion.) The main point is that such mounts allows userspace to umount a top mount and reveal an underlying mount. So for example, umounting the tmpfs mount on /mnt that was created in example (1) using mount namespaces reveals the /opt mount which was mounted beneath it. In (2) where a mount was mounted beneath the top mount in the same mount namespace unmounting the top mount would unmount both the top mount and the mount beneath. In the process the original mount would be remounted on top of the rootfs mount / at the /opt dentry again. This again, is a result of mount propagation only this time it's umount propagation. However, this can be avoided by simply making the parent mount / of the @opt mount a private or slave mount. Then the top mount and the original mount can be unmounted to reveal the mount beneath. These two examples are fairly arcane and are merely added to make it clear how mount propagation has effects on current and future features. More common use-cases will just be things like: mount -t btrfs /dev/sdA /mnt mount -t xfs /dev/sdB --beneath /mnt umount /mnt after which we'll have updated from a btrfs filesystem to a xfs filesystem without ever revealing the underlying mountpoint. The crux is that the proposed mechanism already exists and that it is so powerful as to cover cases where mounts are supposed to be updated with new versions. Crucially, it offers an important flexibility. Namely that updates to a system may either be forced or can be delayed and the umount of the top mount be left to a service if it is a cooperative one. This adds a new flag to move_mount() that allows to explicitly move a beneath the top mount adhering to the following semantics: * Mounts cannot be mounted beneath the rootfs. This restriction encompasses the rootfs but also chroots via chroot() and pivot_root(). To mount a mount beneath the rootfs or a chroot, pivot_root() can be used as illustrated above. * The source mount must be a private mount to force the kernel to allocate a new, unused peer group id. This isn't a required restriction but a voluntary one. It avoids repeating a semantical quirk that already exists today. If bind mounts which already have a peer group id are inserted into mount trees that have the same peer group id this can cause a lot of mount propagation events to be generated (For example, consider running mount --bind /opt /opt in a loop where the parent mount is a shared mount.). * Avoid getting rid of the top mount in the kernel. Cooperative services need to be able to unmount the top mount themselves. This also avoids a good deal of additional complexity. The umount would have to be propagated which would be another rather expensive operation. So namespace_lock() and lock_mount_hash() would potentially have to be held for a long time for both a mount and umount propagation. That should be avoided. * The path to mount beneath must be mounted and attached. * The top mount and its parent must be in the caller's mount namespace and the caller must be able to mount in that mount namespace. * The caller must be able to unmount the top mount to prove that they could reveal the underlying mount. * The propagation tree is calculated based on the destination mount's parent mount and the destination mount's mountpoint on the parent mount. Of course, if the parent of the destination mount and the destination mount are shared mounts in the same peer group and the mountpoint of the new mount to be mounted is a subdir of their ->mnt_root then both will receive a mount of /opt. That's probably easier to understand with an example. Assuming a standard shared rootfs /: mount --bind /opt /opt mount --bind /tmp /opt will cause the same mount tree as: mount --bind /opt /opt mount --beneath /tmp /opt because both / and /opt are shared mounts/peers in the same peer group and the /opt dentry is a subdirectory of both the parent's and the child's ->mnt_root. If a mount tree like that is created it almost always is an accident or abuse of mount propagation. Realistically what most people probably mean in this scenarios is: mount --bind /opt /opt mount --make-private /opt mount --make-shared /opt This forces the allocation of a new separate peer group for the /opt mount. Aferwards a mount --bind or mount --beneath actually makes sense as the / and /opt mount belong to different peer groups. Before that it's likely just confusion about what the user wanted to achieve. * Refuse MOVE_MOUNT_BENEATH if: (1) the @mnt_from has been overmounted in between path resolution and acquiring @namespace_sem when locking @mnt_to. This avoids the proliferation of shadow mounts. (2) if @to_mnt is moved to a different mountpoint while acquiring @namespace_sem to lock @to_mnt. (3) if @to_mnt is unmounted while acquiring @namespace_sem to lock @to_mnt. (4) if the parent of the target mount propagates to the target mount at the same mountpoint. This would mean mounting @mnt_from on @mnt_to->mnt_parent and then propagating a copy @c of @mnt_from onto @mnt_to. This defeats the whole purpose of mounting @mnt_from beneath @mnt_to. (5) if the parent mount @mnt_to->mnt_parent propagates to @mnt_from at the same mountpoint. If @mnt_to->mnt_parent propagates to @mnt_from this would mean propagating a copy @c of @mnt_from on top of @mnt_from. Afterwards @mnt_from would be mounted on top of @mnt_to->mnt_parent and @mnt_to would be unmounted from @mnt->mnt_parent and remounted on @mnt_from. But since @c is already mounted on @mnt_from, @mnt_to would ultimately be remounted on top of @c. Afterwards, @mnt_from would be covered by a copy @c of @mnt_from and @c would be covered by @mnt_from itself. This defeats the whole purpose of mounting @mnt_from beneath @mnt_to. Cases (1) to (3) are required as they deal with races that would cause bugs or unexpected behavior for users. Cases (4) and (5) refuse semantical quirks that would not be a bug but would cause weird mount trees to be created. While they can already be created via other means (mount --bind /opt /opt x n) there's no reason to repeat past mistakes in new features. Link: https://man7.org/linux/man-pages/man8/systemd-sysext.8.html [1] Link: https://brauner.io/2023/02/28/mounting-into-mount-namespaces.html [2] Link: https://github.com/flatcar/sysext-bakery Link: https://fedoraproject.org/wiki/Changes/Unified_Kernel_Support_Phase_1 Link: https://fedoraproject.org/wiki/Changes/Unified_Kernel_Support_Phase_2 Link: https://github.com/systemd/systemd/pull/26013 Reviewed-by: Seth Forshee (DigitalOcean) <sforshee@kernel.org> Message-Id: <20230202-fs-move-mount-replace-v4-4-98f3d80d7eaa@kernel.org> Signed-off-by: Christian Brauner <brauner@kernel.org>
2023-05-03 11:18:42 +00:00
attach_mnt(source_mnt, top_mnt, dest_mp, beneath);
touch_mnt_namespace(source_mnt->mnt_ns);
} else {
if (source_mnt->mnt_ns) {
LIST_HEAD(head);
/* move from anon - the caller will destroy */
for (p = source_mnt; p; p = next_mnt(p, source_mnt))
move_from_ns(p, &head);
list_del_init(&head);
}
fs: allow to mount beneath top mount Various distributions are adding or are in the process of adding support for system extensions and in the future configuration extensions through various tools. A more detailed explanation on system and configuration extensions can be found on the manpage which is listed below at [1]. System extension images may – dynamically at runtime — extend the /usr/ and /opt/ directory hierarchies with additional files. This is particularly useful on immutable system images where a /usr/ and/or /opt/ hierarchy residing on a read-only file system shall be extended temporarily at runtime without making any persistent modifications. When one or more system extension images are activated, their /usr/ and /opt/ hierarchies are combined via overlayfs with the same hierarchies of the host OS, and the host /usr/ and /opt/ overmounted with it ("merging"). When they are deactivated, the mount point is disassembled — again revealing the unmodified original host version of the hierarchy ("unmerging"). Merging thus makes the extension's resources suddenly appear below the /usr/ and /opt/ hierarchies as if they were included in the base OS image itself. Unmerging makes them disappear again, leaving in place only the files that were shipped with the base OS image itself. System configuration images are similar but operate on directories containing system or service configuration. On nearly all modern distributions mount propagation plays a crucial role and the rootfs of the OS is a shared mount in a peer group (usually with peer group id 1): TARGET SOURCE FSTYPE PROPAGATION MNT_ID PARENT_ID / / ext4 shared:1 29 1 On such systems all services and containers run in a separate mount namespace and are pivot_root()ed into their rootfs. A separate mount namespace is almost always used as it is the minimal isolation mechanism services have. But usually they are even much more isolated up to the point where they almost become indistinguishable from containers. Mount propagation again plays a crucial role here. The rootfs of all these services is a slave mount to the peer group of the host rootfs. This is done so the service will receive mount propagation events from the host when certain files or directories are updated. In addition, the rootfs of each service, container, and sandbox is also a shared mount in its separate peer group: TARGET SOURCE FSTYPE PROPAGATION MNT_ID PARENT_ID / / ext4 shared:24 master:1 71 47 For people not too familiar with mount propagation, the master:1 means that this is a slave mount to peer group 1. Which as one can see is the host rootfs as indicated by shared:1 above. The shared:24 indicates that the service rootfs is a shared mount in a separate peer group with peer group id 24. A service may run other services. Such nested services will also have a rootfs mount that is a slave to the peer group of the outer service rootfs mount. For containers things are just slighly different. A container's rootfs isn't a slave to the service's or host rootfs' peer group. The rootfs mount of a container is simply a shared mount in its own peer group: TARGET SOURCE FSTYPE PROPAGATION MNT_ID PARENT_ID /home/ubuntu/debian-tree / ext4 shared:99 61 60 So whereas services are isolated OS components a container is treated like a separate world and mount propagation into it is restricted to a single well known mount that is a slave to the peer group of the shared mount /run on the host: TARGET SOURCE FSTYPE PROPAGATION MNT_ID PARENT_ID /propagate/debian-tree /run/host/incoming tmpfs master:5 71 68 Here, the master:5 indicates that this mount is a slave to the peer group with peer group id 5. This allows to propagate mounts into the container and served as a workaround for not being able to insert mounts into mount namespaces directly. But the new mount api does support inserting mounts directly. For the interested reader the blogpost in [2] might be worth reading where I explain the old and the new approach to inserting mounts into mount namespaces. Containers of course, can themselves be run as services. They often run full systems themselves which means they again run services and containers with the exact same propagation settings explained above. The whole system is designed so that it can be easily updated, including all services in various fine-grained ways without having to enter every single service's mount namespace which would be prohibitively expensive. The mount propagation layout has been carefully chosen so it is possible to propagate updates for system extensions and configurations from the host into all services. The simplest model to update the whole system is to mount on top of /usr, /opt, or /etc on the host. The new mount on /usr, /opt, or /etc will then propagate into every service. This works cleanly the first time. However, when the system is updated multiple times it becomes necessary to unmount the first update on /opt, /usr, /etc and then propagate the new update. But this means, there's an interval where the old base system is accessible. This has to be avoided to protect against downgrade attacks. The vfs already exposes a mechanism to userspace whereby mounts can be mounted beneath an existing mount. Such mounts are internally referred to as "tucked". The patch series exposes the ability to mount beneath a top mount through the new MOVE_MOUNT_BENEATH flag for the move_mount() system call. This allows userspace to seamlessly upgrade mounts. After this series the only thing that will have changed is that mounting beneath an existing mount can be done explicitly instead of just implicitly. Today, there are two scenarios where a mount can be mounted beneath an existing mount instead of on top of it: (1) When a service or container is started in a new mount namespace and pivot_root()s into its new rootfs. The way this is done is by mounting the new rootfs beneath the old rootfs: fd_newroot = open("/var/lib/machines/fedora", ...); fd_oldroot = open("/", ...); fchdir(fd_newroot); pivot_root(".", "."); After the pivot_root(".", ".") call the new rootfs is mounted beneath the old rootfs which can then be unmounted to reveal the underlying mount: fchdir(fd_oldroot); umount2(".", MNT_DETACH); Since pivot_root() moves the caller into a new rootfs no mounts must be propagated out of the new rootfs as a consequence of the pivot_root() call. Thus, the mounts cannot be shared. (2) When a mount is propagated to a mount that already has another mount mounted on the same dentry. The easiest example for this is to create a new mount namespace. The following commands will create a mount namespace where the rootfs mount / will be a slave to the peer group of the host rootfs / mount's peer group. IOW, it will receive propagation from the host: mount --make-shared / unshare --mount --propagation=slave Now a new mount on the /mnt dentry in that mount namespace is created. (As it can be confusing it should be spelled out that the tmpfs mount on the /mnt dentry that was just created doesn't propagate back to the host because the rootfs mount / of the mount namespace isn't a peer of the host rootfs.): mount -t tmpfs tmpfs /mnt TARGET SOURCE FSTYPE PROPAGATION └─/mnt tmpfs tmpfs Now another terminal in the host mount namespace can observe that the mount indeed hasn't propagated back to into the host mount namespace. A new mount can now be created on top of the /mnt dentry with the rootfs mount / as its parent: mount --bind /opt /mnt TARGET SOURCE FSTYPE PROPAGATION └─/mnt /dev/sda2[/opt] ext4 shared:1 The mount namespace that was created earlier can now observe that the bind mount created on the host has propagated into it: TARGET SOURCE FSTYPE PROPAGATION └─/mnt /dev/sda2[/opt] ext4 master:1 └─/mnt tmpfs tmpfs But instead of having been mounted on top of the tmpfs mount at the /mnt dentry the /opt mount has been mounted on top of the rootfs mount at the /mnt dentry. And the tmpfs mount has been remounted on top of the propagated /opt mount at the /opt dentry. So in other words, the propagated mount has been mounted beneath the preexisting mount in that mount namespace. Mount namespaces make this easy to illustrate but it's also easy to mount beneath an existing mount in the same mount namespace (The following example assumes a shared rootfs mount / with peer group id 1): mount --bind /opt /opt TARGET SOURCE FSTYPE MNT_ID PARENT_ID PROPAGATION └─/opt /dev/sda2[/opt] ext4 188 29 shared:1 If another mount is mounted on top of the /opt mount at the /opt dentry: mount --bind /tmp /opt The following clunky mount tree will result: TARGET SOURCE FSTYPE MNT_ID PARENT_ID PROPAGATION └─/opt /dev/sda2[/tmp] ext4 405 29 shared:1 └─/opt /dev/sda2[/opt] ext4 188 405 shared:1 └─/opt /dev/sda2[/tmp] ext4 404 188 shared:1 The /tmp mount is mounted beneath the /opt mount and another copy is mounted on top of the /opt mount. This happens because the rootfs / and the /opt mount are shared mounts in the same peer group. When the new /tmp mount is supposed to be mounted at the /opt dentry then the /tmp mount first propagates to the root mount at the /opt dentry. But there already is the /opt mount mounted at the /opt dentry. So the old /opt mount at the /opt dentry will be mounted on top of the new /tmp mount at the /tmp dentry, i.e. @opt->mnt_parent is @tmp and @opt->mnt_mountpoint is /tmp (Note that @opt->mnt_root is /opt which is what shows up as /opt under SOURCE). So again, a mount will be mounted beneath a preexisting mount. (Fwiw, a few iterations of mount --bind /opt /opt in a loop on a shared rootfs is a good example of what could be referred to as mount explosion.) The main point is that such mounts allows userspace to umount a top mount and reveal an underlying mount. So for example, umounting the tmpfs mount on /mnt that was created in example (1) using mount namespaces reveals the /opt mount which was mounted beneath it. In (2) where a mount was mounted beneath the top mount in the same mount namespace unmounting the top mount would unmount both the top mount and the mount beneath. In the process the original mount would be remounted on top of the rootfs mount / at the /opt dentry again. This again, is a result of mount propagation only this time it's umount propagation. However, this can be avoided by simply making the parent mount / of the @opt mount a private or slave mount. Then the top mount and the original mount can be unmounted to reveal the mount beneath. These two examples are fairly arcane and are merely added to make it clear how mount propagation has effects on current and future features. More common use-cases will just be things like: mount -t btrfs /dev/sdA /mnt mount -t xfs /dev/sdB --beneath /mnt umount /mnt after which we'll have updated from a btrfs filesystem to a xfs filesystem without ever revealing the underlying mountpoint. The crux is that the proposed mechanism already exists and that it is so powerful as to cover cases where mounts are supposed to be updated with new versions. Crucially, it offers an important flexibility. Namely that updates to a system may either be forced or can be delayed and the umount of the top mount be left to a service if it is a cooperative one. This adds a new flag to move_mount() that allows to explicitly move a beneath the top mount adhering to the following semantics: * Mounts cannot be mounted beneath the rootfs. This restriction encompasses the rootfs but also chroots via chroot() and pivot_root(). To mount a mount beneath the rootfs or a chroot, pivot_root() can be used as illustrated above. * The source mount must be a private mount to force the kernel to allocate a new, unused peer group id. This isn't a required restriction but a voluntary one. It avoids repeating a semantical quirk that already exists today. If bind mounts which already have a peer group id are inserted into mount trees that have the same peer group id this can cause a lot of mount propagation events to be generated (For example, consider running mount --bind /opt /opt in a loop where the parent mount is a shared mount.). * Avoid getting rid of the top mount in the kernel. Cooperative services need to be able to unmount the top mount themselves. This also avoids a good deal of additional complexity. The umount would have to be propagated which would be another rather expensive operation. So namespace_lock() and lock_mount_hash() would potentially have to be held for a long time for both a mount and umount propagation. That should be avoided. * The path to mount beneath must be mounted and attached. * The top mount and its parent must be in the caller's mount namespace and the caller must be able to mount in that mount namespace. * The caller must be able to unmount the top mount to prove that they could reveal the underlying mount. * The propagation tree is calculated based on the destination mount's parent mount and the destination mount's mountpoint on the parent mount. Of course, if the parent of the destination mount and the destination mount are shared mounts in the same peer group and the mountpoint of the new mount to be mounted is a subdir of their ->mnt_root then both will receive a mount of /opt. That's probably easier to understand with an example. Assuming a standard shared rootfs /: mount --bind /opt /opt mount --bind /tmp /opt will cause the same mount tree as: mount --bind /opt /opt mount --beneath /tmp /opt because both / and /opt are shared mounts/peers in the same peer group and the /opt dentry is a subdirectory of both the parent's and the child's ->mnt_root. If a mount tree like that is created it almost always is an accident or abuse of mount propagation. Realistically what most people probably mean in this scenarios is: mount --bind /opt /opt mount --make-private /opt mount --make-shared /opt This forces the allocation of a new separate peer group for the /opt mount. Aferwards a mount --bind or mount --beneath actually makes sense as the / and /opt mount belong to different peer groups. Before that it's likely just confusion about what the user wanted to achieve. * Refuse MOVE_MOUNT_BENEATH if: (1) the @mnt_from has been overmounted in between path resolution and acquiring @namespace_sem when locking @mnt_to. This avoids the proliferation of shadow mounts. (2) if @to_mnt is moved to a different mountpoint while acquiring @namespace_sem to lock @to_mnt. (3) if @to_mnt is unmounted while acquiring @namespace_sem to lock @to_mnt. (4) if the parent of the target mount propagates to the target mount at the same mountpoint. This would mean mounting @mnt_from on @mnt_to->mnt_parent and then propagating a copy @c of @mnt_from onto @mnt_to. This defeats the whole purpose of mounting @mnt_from beneath @mnt_to. (5) if the parent mount @mnt_to->mnt_parent propagates to @mnt_from at the same mountpoint. If @mnt_to->mnt_parent propagates to @mnt_from this would mean propagating a copy @c of @mnt_from on top of @mnt_from. Afterwards @mnt_from would be mounted on top of @mnt_to->mnt_parent and @mnt_to would be unmounted from @mnt->mnt_parent and remounted on @mnt_from. But since @c is already mounted on @mnt_from, @mnt_to would ultimately be remounted on top of @c. Afterwards, @mnt_from would be covered by a copy @c of @mnt_from and @c would be covered by @mnt_from itself. This defeats the whole purpose of mounting @mnt_from beneath @mnt_to. Cases (1) to (3) are required as they deal with races that would cause bugs or unexpected behavior for users. Cases (4) and (5) refuse semantical quirks that would not be a bug but would cause weird mount trees to be created. While they can already be created via other means (mount --bind /opt /opt x n) there's no reason to repeat past mistakes in new features. Link: https://man7.org/linux/man-pages/man8/systemd-sysext.8.html [1] Link: https://brauner.io/2023/02/28/mounting-into-mount-namespaces.html [2] Link: https://github.com/flatcar/sysext-bakery Link: https://fedoraproject.org/wiki/Changes/Unified_Kernel_Support_Phase_1 Link: https://fedoraproject.org/wiki/Changes/Unified_Kernel_Support_Phase_2 Link: https://github.com/systemd/systemd/pull/26013 Reviewed-by: Seth Forshee (DigitalOcean) <sforshee@kernel.org> Message-Id: <20230202-fs-move-mount-replace-v4-4-98f3d80d7eaa@kernel.org> Signed-off-by: Christian Brauner <brauner@kernel.org>
2023-05-03 11:18:42 +00:00
if (beneath)
mnt_set_mountpoint_beneath(source_mnt, top_mnt, smp);
else
mnt_set_mountpoint(dest_mnt, dest_mp, source_mnt);
mnt: Tuck mounts under others instead of creating shadow/side mounts. Ever since mount propagation was introduced in cases where a mount in propagated to parent mount mountpoint pair that is already in use the code has placed the new mount behind the old mount in the mount hash table. This implementation detail is problematic as it allows creating arbitrary length mount hash chains. Furthermore it invalidates the constraint maintained elsewhere in the mount code that a parent mount and a mountpoint pair will have exactly one mount upon them. Making it hard to deal with and to talk about this special case in the mount code. Modify mount propagation to notice when there is already a mount at the parent mount and mountpoint where a new mount is propagating to and place that preexisting mount on top of the new mount. Modify unmount propagation to notice when a mount that is being unmounted has another mount on top of it (and no other children), and to replace the unmounted mount with the mount on top of it. Move the MNT_UMUONT test from __lookup_mnt_last into __propagate_umount as that is the only call of __lookup_mnt_last where MNT_UMOUNT may be set on any mount visible in the mount hash table. These modifications allow: - __lookup_mnt_last to be removed. - attach_shadows to be renamed __attach_mnt and its shadow handling to be removed. - commit_tree to be simplified - copy_tree to be simplified The result is an easier to understand tree of mounts that does not allow creation of arbitrary length hash chains in the mount hash table. The result is also a very slight userspace visible difference in semantics. The following two cases now behave identically, where before order mattered: case 1: (explicit user action) B is a slave of A mount something on A/a , it will propagate to B/a and than mount something on B/a case 2: (tucked mount) B is a slave of A mount something on B/a and than mount something on A/a Histroically umount A/a would fail in case 1 and succeed in case 2. Now umount A/a succeeds in both configurations. This very small change in semantics appears if anything to be a bug fix to me and my survey of userspace leads me to believe that no programs will notice or care of this subtle semantic change. v2: Updated to mnt_change_mountpoint to not call dput or mntput and instead to decrement the counts directly. It is guaranteed that there will be other references when mnt_change_mountpoint is called so this is safe. v3: Moved put_mountpoint under mount_lock in attach_recursive_mnt As the locking in fs/namespace.c changed between v2 and v3. v4: Reworked the logic in propagate_mount_busy and __propagate_umount that detects when a mount completely covers another mount. v5: Removed unnecessary tests whose result is alwasy true in find_topper and attach_recursive_mnt. v6: Document the user space visible semantic difference. Cc: stable@vger.kernel.org Fixes: b90fa9ae8f51 ("[PATCH] shared mount handling: bind and rbind") Tested-by: Andrei Vagin <avagin@virtuozzo.com> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2017-01-20 05:28:35 +00:00
commit_tree(source_mnt);
}
hlist_for_each_entry_safe(child, n, &tree_list, mnt_hash) {
struct mount *q;
hlist_del_init(&child->mnt_hash);
mnt: Tuck mounts under others instead of creating shadow/side mounts. Ever since mount propagation was introduced in cases where a mount in propagated to parent mount mountpoint pair that is already in use the code has placed the new mount behind the old mount in the mount hash table. This implementation detail is problematic as it allows creating arbitrary length mount hash chains. Furthermore it invalidates the constraint maintained elsewhere in the mount code that a parent mount and a mountpoint pair will have exactly one mount upon them. Making it hard to deal with and to talk about this special case in the mount code. Modify mount propagation to notice when there is already a mount at the parent mount and mountpoint where a new mount is propagating to and place that preexisting mount on top of the new mount. Modify unmount propagation to notice when a mount that is being unmounted has another mount on top of it (and no other children), and to replace the unmounted mount with the mount on top of it. Move the MNT_UMUONT test from __lookup_mnt_last into __propagate_umount as that is the only call of __lookup_mnt_last where MNT_UMOUNT may be set on any mount visible in the mount hash table. These modifications allow: - __lookup_mnt_last to be removed. - attach_shadows to be renamed __attach_mnt and its shadow handling to be removed. - commit_tree to be simplified - copy_tree to be simplified The result is an easier to understand tree of mounts that does not allow creation of arbitrary length hash chains in the mount hash table. The result is also a very slight userspace visible difference in semantics. The following two cases now behave identically, where before order mattered: case 1: (explicit user action) B is a slave of A mount something on A/a , it will propagate to B/a and than mount something on B/a case 2: (tucked mount) B is a slave of A mount something on B/a and than mount something on A/a Histroically umount A/a would fail in case 1 and succeed in case 2. Now umount A/a succeeds in both configurations. This very small change in semantics appears if anything to be a bug fix to me and my survey of userspace leads me to believe that no programs will notice or care of this subtle semantic change. v2: Updated to mnt_change_mountpoint to not call dput or mntput and instead to decrement the counts directly. It is guaranteed that there will be other references when mnt_change_mountpoint is called so this is safe. v3: Moved put_mountpoint under mount_lock in attach_recursive_mnt As the locking in fs/namespace.c changed between v2 and v3. v4: Reworked the logic in propagate_mount_busy and __propagate_umount that detects when a mount completely covers another mount. v5: Removed unnecessary tests whose result is alwasy true in find_topper and attach_recursive_mnt. v6: Document the user space visible semantic difference. Cc: stable@vger.kernel.org Fixes: b90fa9ae8f51 ("[PATCH] shared mount handling: bind and rbind") Tested-by: Andrei Vagin <avagin@virtuozzo.com> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2017-01-20 05:28:35 +00:00
q = __lookup_mnt(&child->mnt_parent->mnt,
child->mnt_mountpoint);
if (q)
mnt_change_mountpoint(child, smp, q);
/* Notice when we are propagating across user namespaces */
if (child->mnt_parent->mnt_ns->user_ns != user_ns)
lock_mnt_tree(child);
2019-06-17 21:22:14 +00:00
child->mnt.mnt_flags &= ~MNT_LOCKED;
mnt: Tuck mounts under others instead of creating shadow/side mounts. Ever since mount propagation was introduced in cases where a mount in propagated to parent mount mountpoint pair that is already in use the code has placed the new mount behind the old mount in the mount hash table. This implementation detail is problematic as it allows creating arbitrary length mount hash chains. Furthermore it invalidates the constraint maintained elsewhere in the mount code that a parent mount and a mountpoint pair will have exactly one mount upon them. Making it hard to deal with and to talk about this special case in the mount code. Modify mount propagation to notice when there is already a mount at the parent mount and mountpoint where a new mount is propagating to and place that preexisting mount on top of the new mount. Modify unmount propagation to notice when a mount that is being unmounted has another mount on top of it (and no other children), and to replace the unmounted mount with the mount on top of it. Move the MNT_UMUONT test from __lookup_mnt_last into __propagate_umount as that is the only call of __lookup_mnt_last where MNT_UMOUNT may be set on any mount visible in the mount hash table. These modifications allow: - __lookup_mnt_last to be removed. - attach_shadows to be renamed __attach_mnt and its shadow handling to be removed. - commit_tree to be simplified - copy_tree to be simplified The result is an easier to understand tree of mounts that does not allow creation of arbitrary length hash chains in the mount hash table. The result is also a very slight userspace visible difference in semantics. The following two cases now behave identically, where before order mattered: case 1: (explicit user action) B is a slave of A mount something on A/a , it will propagate to B/a and than mount something on B/a case 2: (tucked mount) B is a slave of A mount something on B/a and than mount something on A/a Histroically umount A/a would fail in case 1 and succeed in case 2. Now umount A/a succeeds in both configurations. This very small change in semantics appears if anything to be a bug fix to me and my survey of userspace leads me to believe that no programs will notice or care of this subtle semantic change. v2: Updated to mnt_change_mountpoint to not call dput or mntput and instead to decrement the counts directly. It is guaranteed that there will be other references when mnt_change_mountpoint is called so this is safe. v3: Moved put_mountpoint under mount_lock in attach_recursive_mnt As the locking in fs/namespace.c changed between v2 and v3. v4: Reworked the logic in propagate_mount_busy and __propagate_umount that detects when a mount completely covers another mount. v5: Removed unnecessary tests whose result is alwasy true in find_topper and attach_recursive_mnt. v6: Document the user space visible semantic difference. Cc: stable@vger.kernel.org Fixes: b90fa9ae8f51 ("[PATCH] shared mount handling: bind and rbind") Tested-by: Andrei Vagin <avagin@virtuozzo.com> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2017-01-20 05:28:35 +00:00
commit_tree(child);
}
mnt: Tuck mounts under others instead of creating shadow/side mounts. Ever since mount propagation was introduced in cases where a mount in propagated to parent mount mountpoint pair that is already in use the code has placed the new mount behind the old mount in the mount hash table. This implementation detail is problematic as it allows creating arbitrary length mount hash chains. Furthermore it invalidates the constraint maintained elsewhere in the mount code that a parent mount and a mountpoint pair will have exactly one mount upon them. Making it hard to deal with and to talk about this special case in the mount code. Modify mount propagation to notice when there is already a mount at the parent mount and mountpoint where a new mount is propagating to and place that preexisting mount on top of the new mount. Modify unmount propagation to notice when a mount that is being unmounted has another mount on top of it (and no other children), and to replace the unmounted mount with the mount on top of it. Move the MNT_UMUONT test from __lookup_mnt_last into __propagate_umount as that is the only call of __lookup_mnt_last where MNT_UMOUNT may be set on any mount visible in the mount hash table. These modifications allow: - __lookup_mnt_last to be removed. - attach_shadows to be renamed __attach_mnt and its shadow handling to be removed. - commit_tree to be simplified - copy_tree to be simplified The result is an easier to understand tree of mounts that does not allow creation of arbitrary length hash chains in the mount hash table. The result is also a very slight userspace visible difference in semantics. The following two cases now behave identically, where before order mattered: case 1: (explicit user action) B is a slave of A mount something on A/a , it will propagate to B/a and than mount something on B/a case 2: (tucked mount) B is a slave of A mount something on B/a and than mount something on A/a Histroically umount A/a would fail in case 1 and succeed in case 2. Now umount A/a succeeds in both configurations. This very small change in semantics appears if anything to be a bug fix to me and my survey of userspace leads me to believe that no programs will notice or care of this subtle semantic change. v2: Updated to mnt_change_mountpoint to not call dput or mntput and instead to decrement the counts directly. It is guaranteed that there will be other references when mnt_change_mountpoint is called so this is safe. v3: Moved put_mountpoint under mount_lock in attach_recursive_mnt As the locking in fs/namespace.c changed between v2 and v3. v4: Reworked the logic in propagate_mount_busy and __propagate_umount that detects when a mount completely covers another mount. v5: Removed unnecessary tests whose result is alwasy true in find_topper and attach_recursive_mnt. v6: Document the user space visible semantic difference. Cc: stable@vger.kernel.org Fixes: b90fa9ae8f51 ("[PATCH] shared mount handling: bind and rbind") Tested-by: Andrei Vagin <avagin@virtuozzo.com> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2017-01-20 05:28:35 +00:00
put_mountpoint(smp);
unlock_mount_hash();
return 0;
out_cleanup_ids:
smarter propagate_mnt() The current mainline has copies propagated to *all* nodes, then tears down the copies we made for nodes that do not contain counterparts of the desired mountpoint. That sets the right propagation graph for the copies (at teardown time we move the slaves of removed node to a surviving peer or directly to master), but we end up paying a fairly steep price in useless allocations. It's fairly easy to create a situation where N calls of mount(2) create exactly N bindings, with O(N^2) vfsmounts allocated and freed in process. Fortunately, it is possible to avoid those allocations/freeings. The trick is to create copies in the right order and find which one would've eventually become a master with the current algorithm. It turns out to be possible in O(nodes getting propagation) time and with no extra allocations at all. One part is that we need to make sure that eventual master will be created before its slaves, so we need to walk the propagation tree in a different order - by peer groups. And iterate through the peers before dealing with the next group. Another thing is finding the (earlier) copy that will be a master of one we are about to create; to do that we are (temporary) marking the masters of mountpoints we are attaching the copies to. Either we are in a peer of the last mountpoint we'd dealt with, or we have the following situation: we are attaching to mountpoint M, the last copy S_0 had been attached to M_0 and there are sequences S_0...S_n, M_0...M_n such that S_{i+1} is a master of S_{i}, S_{i} mounted on M{i} and we need to create a slave of the first S_{k} such that M is getting propagation from M_{k}. It means that the master of M_{k} will be among the sequence of masters of M. On the other hand, the nearest marked node in that sequence will either be the master of M_{k} or the master of M_{k-1} (the latter - in the case if M_{k-1} is a slave of something M gets propagation from, but in a wrong peer group). So we go through the sequence of masters of M until we find a marked one (P). Let N be the one before it. Then we go through the sequence of masters of S_0 until we find one (say, S) mounted on a node D that has P as master and check if D is a peer of N. If it is, S will be the master of new copy, if not - the master of S will be. That's it for the hard part; the rest is fairly simple. Iterator is in next_group(), handling of one prospective mountpoint is propagate_one(). It seems to survive all tests and gives a noticably better performance than the current mainline for setups that are seriously using shared subtrees. Cc: stable@vger.kernel.org Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-02-27 14:35:45 +00:00
while (!hlist_empty(&tree_list)) {
child = hlist_entry(tree_list.first, struct mount, mnt_hash);
mnt: Add a per mount namespace limit on the number of mounts CAI Qian <caiqian@redhat.com> pointed out that the semantics of shared subtrees make it possible to create an exponentially increasing number of mounts in a mount namespace. mkdir /tmp/1 /tmp/2 mount --make-rshared / for i in $(seq 1 20) ; do mount --bind /tmp/1 /tmp/2 ; done Will create create 2^20 or 1048576 mounts, which is a practical problem as some people have managed to hit this by accident. As such CVE-2016-6213 was assigned. Ian Kent <raven@themaw.net> described the situation for autofs users as follows: > The number of mounts for direct mount maps is usually not very large because of > the way they are implemented, large direct mount maps can have performance > problems. There can be anywhere from a few (likely case a few hundred) to less > than 10000, plus mounts that have been triggered and not yet expired. > > Indirect mounts have one autofs mount at the root plus the number of mounts that > have been triggered and not yet expired. > > The number of autofs indirect map entries can range from a few to the common > case of several thousand and in rare cases up to between 30000 and 50000. I've > not heard of people with maps larger than 50000 entries. > > The larger the number of map entries the greater the possibility for a large > number of active mounts so it's not hard to expect cases of a 1000 or somewhat > more active mounts. So I am setting the default number of mounts allowed per mount namespace at 100,000. This is more than enough for any use case I know of, but small enough to quickly stop an exponential increase in mounts. Which should be perfect to catch misconfigurations and malfunctioning programs. For anyone who needs a higher limit this can be changed by writing to the new /proc/sys/fs/mount-max sysctl. Tested-by: CAI Qian <caiqian@redhat.com> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2016-09-28 05:27:17 +00:00
child->mnt_parent->mnt_ns->pending_mounts = 0;
umount_tree(child, UMOUNT_SYNC);
smarter propagate_mnt() The current mainline has copies propagated to *all* nodes, then tears down the copies we made for nodes that do not contain counterparts of the desired mountpoint. That sets the right propagation graph for the copies (at teardown time we move the slaves of removed node to a surviving peer or directly to master), but we end up paying a fairly steep price in useless allocations. It's fairly easy to create a situation where N calls of mount(2) create exactly N bindings, with O(N^2) vfsmounts allocated and freed in process. Fortunately, it is possible to avoid those allocations/freeings. The trick is to create copies in the right order and find which one would've eventually become a master with the current algorithm. It turns out to be possible in O(nodes getting propagation) time and with no extra allocations at all. One part is that we need to make sure that eventual master will be created before its slaves, so we need to walk the propagation tree in a different order - by peer groups. And iterate through the peers before dealing with the next group. Another thing is finding the (earlier) copy that will be a master of one we are about to create; to do that we are (temporary) marking the masters of mountpoints we are attaching the copies to. Either we are in a peer of the last mountpoint we'd dealt with, or we have the following situation: we are attaching to mountpoint M, the last copy S_0 had been attached to M_0 and there are sequences S_0...S_n, M_0...M_n such that S_{i+1} is a master of S_{i}, S_{i} mounted on M{i} and we need to create a slave of the first S_{k} such that M is getting propagation from M_{k}. It means that the master of M_{k} will be among the sequence of masters of M. On the other hand, the nearest marked node in that sequence will either be the master of M_{k} or the master of M_{k-1} (the latter - in the case if M_{k-1} is a slave of something M gets propagation from, but in a wrong peer group). So we go through the sequence of masters of M until we find a marked one (P). Let N be the one before it. Then we go through the sequence of masters of S_0 until we find one (say, S) mounted on a node D that has P as master and check if D is a peer of N. If it is, S will be the master of new copy, if not - the master of S will be. That's it for the hard part; the rest is fairly simple. Iterator is in next_group(), handling of one prospective mountpoint is propagate_one(). It seems to survive all tests and gives a noticably better performance than the current mainline for setups that are seriously using shared subtrees. Cc: stable@vger.kernel.org Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-02-27 14:35:45 +00:00
}
unlock_mount_hash();
cleanup_group_ids(source_mnt, NULL);
out:
mnt: Add a per mount namespace limit on the number of mounts CAI Qian <caiqian@redhat.com> pointed out that the semantics of shared subtrees make it possible to create an exponentially increasing number of mounts in a mount namespace. mkdir /tmp/1 /tmp/2 mount --make-rshared / for i in $(seq 1 20) ; do mount --bind /tmp/1 /tmp/2 ; done Will create create 2^20 or 1048576 mounts, which is a practical problem as some people have managed to hit this by accident. As such CVE-2016-6213 was assigned. Ian Kent <raven@themaw.net> described the situation for autofs users as follows: > The number of mounts for direct mount maps is usually not very large because of > the way they are implemented, large direct mount maps can have performance > problems. There can be anywhere from a few (likely case a few hundred) to less > than 10000, plus mounts that have been triggered and not yet expired. > > Indirect mounts have one autofs mount at the root plus the number of mounts that > have been triggered and not yet expired. > > The number of autofs indirect map entries can range from a few to the common > case of several thousand and in rare cases up to between 30000 and 50000. I've > not heard of people with maps larger than 50000 entries. > > The larger the number of map entries the greater the possibility for a large > number of active mounts so it's not hard to expect cases of a 1000 or somewhat > more active mounts. So I am setting the default number of mounts allowed per mount namespace at 100,000. This is more than enough for any use case I know of, but small enough to quickly stop an exponential increase in mounts. Which should be perfect to catch misconfigurations and malfunctioning programs. For anyone who needs a higher limit this can be changed by writing to the new /proc/sys/fs/mount-max sysctl. Tested-by: CAI Qian <caiqian@redhat.com> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2016-09-28 05:27:17 +00:00
ns->pending_mounts = 0;
mnt: Tuck mounts under others instead of creating shadow/side mounts. Ever since mount propagation was introduced in cases where a mount in propagated to parent mount mountpoint pair that is already in use the code has placed the new mount behind the old mount in the mount hash table. This implementation detail is problematic as it allows creating arbitrary length mount hash chains. Furthermore it invalidates the constraint maintained elsewhere in the mount code that a parent mount and a mountpoint pair will have exactly one mount upon them. Making it hard to deal with and to talk about this special case in the mount code. Modify mount propagation to notice when there is already a mount at the parent mount and mountpoint where a new mount is propagating to and place that preexisting mount on top of the new mount. Modify unmount propagation to notice when a mount that is being unmounted has another mount on top of it (and no other children), and to replace the unmounted mount with the mount on top of it. Move the MNT_UMUONT test from __lookup_mnt_last into __propagate_umount as that is the only call of __lookup_mnt_last where MNT_UMOUNT may be set on any mount visible in the mount hash table. These modifications allow: - __lookup_mnt_last to be removed. - attach_shadows to be renamed __attach_mnt and its shadow handling to be removed. - commit_tree to be simplified - copy_tree to be simplified The result is an easier to understand tree of mounts that does not allow creation of arbitrary length hash chains in the mount hash table. The result is also a very slight userspace visible difference in semantics. The following two cases now behave identically, where before order mattered: case 1: (explicit user action) B is a slave of A mount something on A/a , it will propagate to B/a and than mount something on B/a case 2: (tucked mount) B is a slave of A mount something on B/a and than mount something on A/a Histroically umount A/a would fail in case 1 and succeed in case 2. Now umount A/a succeeds in both configurations. This very small change in semantics appears if anything to be a bug fix to me and my survey of userspace leads me to believe that no programs will notice or care of this subtle semantic change. v2: Updated to mnt_change_mountpoint to not call dput or mntput and instead to decrement the counts directly. It is guaranteed that there will be other references when mnt_change_mountpoint is called so this is safe. v3: Moved put_mountpoint under mount_lock in attach_recursive_mnt As the locking in fs/namespace.c changed between v2 and v3. v4: Reworked the logic in propagate_mount_busy and __propagate_umount that detects when a mount completely covers another mount. v5: Removed unnecessary tests whose result is alwasy true in find_topper and attach_recursive_mnt. v6: Document the user space visible semantic difference. Cc: stable@vger.kernel.org Fixes: b90fa9ae8f51 ("[PATCH] shared mount handling: bind and rbind") Tested-by: Andrei Vagin <avagin@virtuozzo.com> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2017-01-20 05:28:35 +00:00
read_seqlock_excl(&mount_lock);
put_mountpoint(smp);
read_sequnlock_excl(&mount_lock);
return err;
}
fs: allow to mount beneath top mount Various distributions are adding or are in the process of adding support for system extensions and in the future configuration extensions through various tools. A more detailed explanation on system and configuration extensions can be found on the manpage which is listed below at [1]. System extension images may – dynamically at runtime — extend the /usr/ and /opt/ directory hierarchies with additional files. This is particularly useful on immutable system images where a /usr/ and/or /opt/ hierarchy residing on a read-only file system shall be extended temporarily at runtime without making any persistent modifications. When one or more system extension images are activated, their /usr/ and /opt/ hierarchies are combined via overlayfs with the same hierarchies of the host OS, and the host /usr/ and /opt/ overmounted with it ("merging"). When they are deactivated, the mount point is disassembled — again revealing the unmodified original host version of the hierarchy ("unmerging"). Merging thus makes the extension's resources suddenly appear below the /usr/ and /opt/ hierarchies as if they were included in the base OS image itself. Unmerging makes them disappear again, leaving in place only the files that were shipped with the base OS image itself. System configuration images are similar but operate on directories containing system or service configuration. On nearly all modern distributions mount propagation plays a crucial role and the rootfs of the OS is a shared mount in a peer group (usually with peer group id 1): TARGET SOURCE FSTYPE PROPAGATION MNT_ID PARENT_ID / / ext4 shared:1 29 1 On such systems all services and containers run in a separate mount namespace and are pivot_root()ed into their rootfs. A separate mount namespace is almost always used as it is the minimal isolation mechanism services have. But usually they are even much more isolated up to the point where they almost become indistinguishable from containers. Mount propagation again plays a crucial role here. The rootfs of all these services is a slave mount to the peer group of the host rootfs. This is done so the service will receive mount propagation events from the host when certain files or directories are updated. In addition, the rootfs of each service, container, and sandbox is also a shared mount in its separate peer group: TARGET SOURCE FSTYPE PROPAGATION MNT_ID PARENT_ID / / ext4 shared:24 master:1 71 47 For people not too familiar with mount propagation, the master:1 means that this is a slave mount to peer group 1. Which as one can see is the host rootfs as indicated by shared:1 above. The shared:24 indicates that the service rootfs is a shared mount in a separate peer group with peer group id 24. A service may run other services. Such nested services will also have a rootfs mount that is a slave to the peer group of the outer service rootfs mount. For containers things are just slighly different. A container's rootfs isn't a slave to the service's or host rootfs' peer group. The rootfs mount of a container is simply a shared mount in its own peer group: TARGET SOURCE FSTYPE PROPAGATION MNT_ID PARENT_ID /home/ubuntu/debian-tree / ext4 shared:99 61 60 So whereas services are isolated OS components a container is treated like a separate world and mount propagation into it is restricted to a single well known mount that is a slave to the peer group of the shared mount /run on the host: TARGET SOURCE FSTYPE PROPAGATION MNT_ID PARENT_ID /propagate/debian-tree /run/host/incoming tmpfs master:5 71 68 Here, the master:5 indicates that this mount is a slave to the peer group with peer group id 5. This allows to propagate mounts into the container and served as a workaround for not being able to insert mounts into mount namespaces directly. But the new mount api does support inserting mounts directly. For the interested reader the blogpost in [2] might be worth reading where I explain the old and the new approach to inserting mounts into mount namespaces. Containers of course, can themselves be run as services. They often run full systems themselves which means they again run services and containers with the exact same propagation settings explained above. The whole system is designed so that it can be easily updated, including all services in various fine-grained ways without having to enter every single service's mount namespace which would be prohibitively expensive. The mount propagation layout has been carefully chosen so it is possible to propagate updates for system extensions and configurations from the host into all services. The simplest model to update the whole system is to mount on top of /usr, /opt, or /etc on the host. The new mount on /usr, /opt, or /etc will then propagate into every service. This works cleanly the first time. However, when the system is updated multiple times it becomes necessary to unmount the first update on /opt, /usr, /etc and then propagate the new update. But this means, there's an interval where the old base system is accessible. This has to be avoided to protect against downgrade attacks. The vfs already exposes a mechanism to userspace whereby mounts can be mounted beneath an existing mount. Such mounts are internally referred to as "tucked". The patch series exposes the ability to mount beneath a top mount through the new MOVE_MOUNT_BENEATH flag for the move_mount() system call. This allows userspace to seamlessly upgrade mounts. After this series the only thing that will have changed is that mounting beneath an existing mount can be done explicitly instead of just implicitly. Today, there are two scenarios where a mount can be mounted beneath an existing mount instead of on top of it: (1) When a service or container is started in a new mount namespace and pivot_root()s into its new rootfs. The way this is done is by mounting the new rootfs beneath the old rootfs: fd_newroot = open("/var/lib/machines/fedora", ...); fd_oldroot = open("/", ...); fchdir(fd_newroot); pivot_root(".", "."); After the pivot_root(".", ".") call the new rootfs is mounted beneath the old rootfs which can then be unmounted to reveal the underlying mount: fchdir(fd_oldroot); umount2(".", MNT_DETACH); Since pivot_root() moves the caller into a new rootfs no mounts must be propagated out of the new rootfs as a consequence of the pivot_root() call. Thus, the mounts cannot be shared. (2) When a mount is propagated to a mount that already has another mount mounted on the same dentry. The easiest example for this is to create a new mount namespace. The following commands will create a mount namespace where the rootfs mount / will be a slave to the peer group of the host rootfs / mount's peer group. IOW, it will receive propagation from the host: mount --make-shared / unshare --mount --propagation=slave Now a new mount on the /mnt dentry in that mount namespace is created. (As it can be confusing it should be spelled out that the tmpfs mount on the /mnt dentry that was just created doesn't propagate back to the host because the rootfs mount / of the mount namespace isn't a peer of the host rootfs.): mount -t tmpfs tmpfs /mnt TARGET SOURCE FSTYPE PROPAGATION └─/mnt tmpfs tmpfs Now another terminal in the host mount namespace can observe that the mount indeed hasn't propagated back to into the host mount namespace. A new mount can now be created on top of the /mnt dentry with the rootfs mount / as its parent: mount --bind /opt /mnt TARGET SOURCE FSTYPE PROPAGATION └─/mnt /dev/sda2[/opt] ext4 shared:1 The mount namespace that was created earlier can now observe that the bind mount created on the host has propagated into it: TARGET SOURCE FSTYPE PROPAGATION └─/mnt /dev/sda2[/opt] ext4 master:1 └─/mnt tmpfs tmpfs But instead of having been mounted on top of the tmpfs mount at the /mnt dentry the /opt mount has been mounted on top of the rootfs mount at the /mnt dentry. And the tmpfs mount has been remounted on top of the propagated /opt mount at the /opt dentry. So in other words, the propagated mount has been mounted beneath the preexisting mount in that mount namespace. Mount namespaces make this easy to illustrate but it's also easy to mount beneath an existing mount in the same mount namespace (The following example assumes a shared rootfs mount / with peer group id 1): mount --bind /opt /opt TARGET SOURCE FSTYPE MNT_ID PARENT_ID PROPAGATION └─/opt /dev/sda2[/opt] ext4 188 29 shared:1 If another mount is mounted on top of the /opt mount at the /opt dentry: mount --bind /tmp /opt The following clunky mount tree will result: TARGET SOURCE FSTYPE MNT_ID PARENT_ID PROPAGATION └─/opt /dev/sda2[/tmp] ext4 405 29 shared:1 └─/opt /dev/sda2[/opt] ext4 188 405 shared:1 └─/opt /dev/sda2[/tmp] ext4 404 188 shared:1 The /tmp mount is mounted beneath the /opt mount and another copy is mounted on top of the /opt mount. This happens because the rootfs / and the /opt mount are shared mounts in the same peer group. When the new /tmp mount is supposed to be mounted at the /opt dentry then the /tmp mount first propagates to the root mount at the /opt dentry. But there already is the /opt mount mounted at the /opt dentry. So the old /opt mount at the /opt dentry will be mounted on top of the new /tmp mount at the /tmp dentry, i.e. @opt->mnt_parent is @tmp and @opt->mnt_mountpoint is /tmp (Note that @opt->mnt_root is /opt which is what shows up as /opt under SOURCE). So again, a mount will be mounted beneath a preexisting mount. (Fwiw, a few iterations of mount --bind /opt /opt in a loop on a shared rootfs is a good example of what could be referred to as mount explosion.) The main point is that such mounts allows userspace to umount a top mount and reveal an underlying mount. So for example, umounting the tmpfs mount on /mnt that was created in example (1) using mount namespaces reveals the /opt mount which was mounted beneath it. In (2) where a mount was mounted beneath the top mount in the same mount namespace unmounting the top mount would unmount both the top mount and the mount beneath. In the process the original mount would be remounted on top of the rootfs mount / at the /opt dentry again. This again, is a result of mount propagation only this time it's umount propagation. However, this can be avoided by simply making the parent mount / of the @opt mount a private or slave mount. Then the top mount and the original mount can be unmounted to reveal the mount beneath. These two examples are fairly arcane and are merely added to make it clear how mount propagation has effects on current and future features. More common use-cases will just be things like: mount -t btrfs /dev/sdA /mnt mount -t xfs /dev/sdB --beneath /mnt umount /mnt after which we'll have updated from a btrfs filesystem to a xfs filesystem without ever revealing the underlying mountpoint. The crux is that the proposed mechanism already exists and that it is so powerful as to cover cases where mounts are supposed to be updated with new versions. Crucially, it offers an important flexibility. Namely that updates to a system may either be forced or can be delayed and the umount of the top mount be left to a service if it is a cooperative one. This adds a new flag to move_mount() that allows to explicitly move a beneath the top mount adhering to the following semantics: * Mounts cannot be mounted beneath the rootfs. This restriction encompasses the rootfs but also chroots via chroot() and pivot_root(). To mount a mount beneath the rootfs or a chroot, pivot_root() can be used as illustrated above. * The source mount must be a private mount to force the kernel to allocate a new, unused peer group id. This isn't a required restriction but a voluntary one. It avoids repeating a semantical quirk that already exists today. If bind mounts which already have a peer group id are inserted into mount trees that have the same peer group id this can cause a lot of mount propagation events to be generated (For example, consider running mount --bind /opt /opt in a loop where the parent mount is a shared mount.). * Avoid getting rid of the top mount in the kernel. Cooperative services need to be able to unmount the top mount themselves. This also avoids a good deal of additional complexity. The umount would have to be propagated which would be another rather expensive operation. So namespace_lock() and lock_mount_hash() would potentially have to be held for a long time for both a mount and umount propagation. That should be avoided. * The path to mount beneath must be mounted and attached. * The top mount and its parent must be in the caller's mount namespace and the caller must be able to mount in that mount namespace. * The caller must be able to unmount the top mount to prove that they could reveal the underlying mount. * The propagation tree is calculated based on the destination mount's parent mount and the destination mount's mountpoint on the parent mount. Of course, if the parent of the destination mount and the destination mount are shared mounts in the same peer group and the mountpoint of the new mount to be mounted is a subdir of their ->mnt_root then both will receive a mount of /opt. That's probably easier to understand with an example. Assuming a standard shared rootfs /: mount --bind /opt /opt mount --bind /tmp /opt will cause the same mount tree as: mount --bind /opt /opt mount --beneath /tmp /opt because both / and /opt are shared mounts/peers in the same peer group and the /opt dentry is a subdirectory of both the parent's and the child's ->mnt_root. If a mount tree like that is created it almost always is an accident or abuse of mount propagation. Realistically what most people probably mean in this scenarios is: mount --bind /opt /opt mount --make-private /opt mount --make-shared /opt This forces the allocation of a new separate peer group for the /opt mount. Aferwards a mount --bind or mount --beneath actually makes sense as the / and /opt mount belong to different peer groups. Before that it's likely just confusion about what the user wanted to achieve. * Refuse MOVE_MOUNT_BENEATH if: (1) the @mnt_from has been overmounted in between path resolution and acquiring @namespace_sem when locking @mnt_to. This avoids the proliferation of shadow mounts. (2) if @to_mnt is moved to a different mountpoint while acquiring @namespace_sem to lock @to_mnt. (3) if @to_mnt is unmounted while acquiring @namespace_sem to lock @to_mnt. (4) if the parent of the target mount propagates to the target mount at the same mountpoint. This would mean mounting @mnt_from on @mnt_to->mnt_parent and then propagating a copy @c of @mnt_from onto @mnt_to. This defeats the whole purpose of mounting @mnt_from beneath @mnt_to. (5) if the parent mount @mnt_to->mnt_parent propagates to @mnt_from at the same mountpoint. If @mnt_to->mnt_parent propagates to @mnt_from this would mean propagating a copy @c of @mnt_from on top of @mnt_from. Afterwards @mnt_from would be mounted on top of @mnt_to->mnt_parent and @mnt_to would be unmounted from @mnt->mnt_parent and remounted on @mnt_from. But since @c is already mounted on @mnt_from, @mnt_to would ultimately be remounted on top of @c. Afterwards, @mnt_from would be covered by a copy @c of @mnt_from and @c would be covered by @mnt_from itself. This defeats the whole purpose of mounting @mnt_from beneath @mnt_to. Cases (1) to (3) are required as they deal with races that would cause bugs or unexpected behavior for users. Cases (4) and (5) refuse semantical quirks that would not be a bug but would cause weird mount trees to be created. While they can already be created via other means (mount --bind /opt /opt x n) there's no reason to repeat past mistakes in new features. Link: https://man7.org/linux/man-pages/man8/systemd-sysext.8.html [1] Link: https://brauner.io/2023/02/28/mounting-into-mount-namespaces.html [2] Link: https://github.com/flatcar/sysext-bakery Link: https://fedoraproject.org/wiki/Changes/Unified_Kernel_Support_Phase_1 Link: https://fedoraproject.org/wiki/Changes/Unified_Kernel_Support_Phase_2 Link: https://github.com/systemd/systemd/pull/26013 Reviewed-by: Seth Forshee (DigitalOcean) <sforshee@kernel.org> Message-Id: <20230202-fs-move-mount-replace-v4-4-98f3d80d7eaa@kernel.org> Signed-off-by: Christian Brauner <brauner@kernel.org>
2023-05-03 11:18:42 +00:00
/**
* do_lock_mount - lock mount and mountpoint
* @path: target path
* @beneath: whether the intention is to mount beneath @path
*
* Follow the mount stack on @path until the top mount @mnt is found. If
* the initial @path->{mnt,dentry} is a mountpoint lookup the first
* mount stacked on top of it. Then simply follow @{mnt,mnt->mnt_root}
* until nothing is stacked on top of it anymore.
*
* Acquire the inode_lock() on the top mount's ->mnt_root to protect
* against concurrent removal of the new mountpoint from another mount
* namespace.
*
* If @beneath is requested, acquire inode_lock() on @mnt's mountpoint
* @mp on @mnt->mnt_parent must be acquired. This protects against a
* concurrent unlink of @mp->mnt_dentry from another mount namespace
* where @mnt doesn't have a child mount mounted @mp. A concurrent
* removal of @mnt->mnt_root doesn't matter as nothing will be mounted
* on top of it for @beneath.
*
* In addition, @beneath needs to make sure that @mnt hasn't been
* unmounted or moved from its current mountpoint in between dropping
* @mount_lock and acquiring @namespace_sem. For the !@beneath case @mnt
* being unmounted would be detected later by e.g., calling
* check_mnt(mnt) in the function it's called from. For the @beneath
* case however, it's useful to detect it directly in do_lock_mount().
* If @mnt hasn't been unmounted then @mnt->mnt_mountpoint still points
* to @mnt->mnt_mp->m_dentry. But if @mnt has been unmounted it will
* point to @mnt->mnt_root and @mnt->mnt_mp will be NULL.
*
* Return: Either the target mountpoint on the top mount or the top
* mount's mountpoint.
*/
static struct mountpoint *do_lock_mount(struct path *path, bool beneath)
{
fs: allow to mount beneath top mount Various distributions are adding or are in the process of adding support for system extensions and in the future configuration extensions through various tools. A more detailed explanation on system and configuration extensions can be found on the manpage which is listed below at [1]. System extension images may – dynamically at runtime — extend the /usr/ and /opt/ directory hierarchies with additional files. This is particularly useful on immutable system images where a /usr/ and/or /opt/ hierarchy residing on a read-only file system shall be extended temporarily at runtime without making any persistent modifications. When one or more system extension images are activated, their /usr/ and /opt/ hierarchies are combined via overlayfs with the same hierarchies of the host OS, and the host /usr/ and /opt/ overmounted with it ("merging"). When they are deactivated, the mount point is disassembled — again revealing the unmodified original host version of the hierarchy ("unmerging"). Merging thus makes the extension's resources suddenly appear below the /usr/ and /opt/ hierarchies as if they were included in the base OS image itself. Unmerging makes them disappear again, leaving in place only the files that were shipped with the base OS image itself. System configuration images are similar but operate on directories containing system or service configuration. On nearly all modern distributions mount propagation plays a crucial role and the rootfs of the OS is a shared mount in a peer group (usually with peer group id 1): TARGET SOURCE FSTYPE PROPAGATION MNT_ID PARENT_ID / / ext4 shared:1 29 1 On such systems all services and containers run in a separate mount namespace and are pivot_root()ed into their rootfs. A separate mount namespace is almost always used as it is the minimal isolation mechanism services have. But usually they are even much more isolated up to the point where they almost become indistinguishable from containers. Mount propagation again plays a crucial role here. The rootfs of all these services is a slave mount to the peer group of the host rootfs. This is done so the service will receive mount propagation events from the host when certain files or directories are updated. In addition, the rootfs of each service, container, and sandbox is also a shared mount in its separate peer group: TARGET SOURCE FSTYPE PROPAGATION MNT_ID PARENT_ID / / ext4 shared:24 master:1 71 47 For people not too familiar with mount propagation, the master:1 means that this is a slave mount to peer group 1. Which as one can see is the host rootfs as indicated by shared:1 above. The shared:24 indicates that the service rootfs is a shared mount in a separate peer group with peer group id 24. A service may run other services. Such nested services will also have a rootfs mount that is a slave to the peer group of the outer service rootfs mount. For containers things are just slighly different. A container's rootfs isn't a slave to the service's or host rootfs' peer group. The rootfs mount of a container is simply a shared mount in its own peer group: TARGET SOURCE FSTYPE PROPAGATION MNT_ID PARENT_ID /home/ubuntu/debian-tree / ext4 shared:99 61 60 So whereas services are isolated OS components a container is treated like a separate world and mount propagation into it is restricted to a single well known mount that is a slave to the peer group of the shared mount /run on the host: TARGET SOURCE FSTYPE PROPAGATION MNT_ID PARENT_ID /propagate/debian-tree /run/host/incoming tmpfs master:5 71 68 Here, the master:5 indicates that this mount is a slave to the peer group with peer group id 5. This allows to propagate mounts into the container and served as a workaround for not being able to insert mounts into mount namespaces directly. But the new mount api does support inserting mounts directly. For the interested reader the blogpost in [2] might be worth reading where I explain the old and the new approach to inserting mounts into mount namespaces. Containers of course, can themselves be run as services. They often run full systems themselves which means they again run services and containers with the exact same propagation settings explained above. The whole system is designed so that it can be easily updated, including all services in various fine-grained ways without having to enter every single service's mount namespace which would be prohibitively expensive. The mount propagation layout has been carefully chosen so it is possible to propagate updates for system extensions and configurations from the host into all services. The simplest model to update the whole system is to mount on top of /usr, /opt, or /etc on the host. The new mount on /usr, /opt, or /etc will then propagate into every service. This works cleanly the first time. However, when the system is updated multiple times it becomes necessary to unmount the first update on /opt, /usr, /etc and then propagate the new update. But this means, there's an interval where the old base system is accessible. This has to be avoided to protect against downgrade attacks. The vfs already exposes a mechanism to userspace whereby mounts can be mounted beneath an existing mount. Such mounts are internally referred to as "tucked". The patch series exposes the ability to mount beneath a top mount through the new MOVE_MOUNT_BENEATH flag for the move_mount() system call. This allows userspace to seamlessly upgrade mounts. After this series the only thing that will have changed is that mounting beneath an existing mount can be done explicitly instead of just implicitly. Today, there are two scenarios where a mount can be mounted beneath an existing mount instead of on top of it: (1) When a service or container is started in a new mount namespace and pivot_root()s into its new rootfs. The way this is done is by mounting the new rootfs beneath the old rootfs: fd_newroot = open("/var/lib/machines/fedora", ...); fd_oldroot = open("/", ...); fchdir(fd_newroot); pivot_root(".", "."); After the pivot_root(".", ".") call the new rootfs is mounted beneath the old rootfs which can then be unmounted to reveal the underlying mount: fchdir(fd_oldroot); umount2(".", MNT_DETACH); Since pivot_root() moves the caller into a new rootfs no mounts must be propagated out of the new rootfs as a consequence of the pivot_root() call. Thus, the mounts cannot be shared. (2) When a mount is propagated to a mount that already has another mount mounted on the same dentry. The easiest example for this is to create a new mount namespace. The following commands will create a mount namespace where the rootfs mount / will be a slave to the peer group of the host rootfs / mount's peer group. IOW, it will receive propagation from the host: mount --make-shared / unshare --mount --propagation=slave Now a new mount on the /mnt dentry in that mount namespace is created. (As it can be confusing it should be spelled out that the tmpfs mount on the /mnt dentry that was just created doesn't propagate back to the host because the rootfs mount / of the mount namespace isn't a peer of the host rootfs.): mount -t tmpfs tmpfs /mnt TARGET SOURCE FSTYPE PROPAGATION └─/mnt tmpfs tmpfs Now another terminal in the host mount namespace can observe that the mount indeed hasn't propagated back to into the host mount namespace. A new mount can now be created on top of the /mnt dentry with the rootfs mount / as its parent: mount --bind /opt /mnt TARGET SOURCE FSTYPE PROPAGATION └─/mnt /dev/sda2[/opt] ext4 shared:1 The mount namespace that was created earlier can now observe that the bind mount created on the host has propagated into it: TARGET SOURCE FSTYPE PROPAGATION └─/mnt /dev/sda2[/opt] ext4 master:1 └─/mnt tmpfs tmpfs But instead of having been mounted on top of the tmpfs mount at the /mnt dentry the /opt mount has been mounted on top of the rootfs mount at the /mnt dentry. And the tmpfs mount has been remounted on top of the propagated /opt mount at the /opt dentry. So in other words, the propagated mount has been mounted beneath the preexisting mount in that mount namespace. Mount namespaces make this easy to illustrate but it's also easy to mount beneath an existing mount in the same mount namespace (The following example assumes a shared rootfs mount / with peer group id 1): mount --bind /opt /opt TARGET SOURCE FSTYPE MNT_ID PARENT_ID PROPAGATION └─/opt /dev/sda2[/opt] ext4 188 29 shared:1 If another mount is mounted on top of the /opt mount at the /opt dentry: mount --bind /tmp /opt The following clunky mount tree will result: TARGET SOURCE FSTYPE MNT_ID PARENT_ID PROPAGATION └─/opt /dev/sda2[/tmp] ext4 405 29 shared:1 └─/opt /dev/sda2[/opt] ext4 188 405 shared:1 └─/opt /dev/sda2[/tmp] ext4 404 188 shared:1 The /tmp mount is mounted beneath the /opt mount and another copy is mounted on top of the /opt mount. This happens because the rootfs / and the /opt mount are shared mounts in the same peer group. When the new /tmp mount is supposed to be mounted at the /opt dentry then the /tmp mount first propagates to the root mount at the /opt dentry. But there already is the /opt mount mounted at the /opt dentry. So the old /opt mount at the /opt dentry will be mounted on top of the new /tmp mount at the /tmp dentry, i.e. @opt->mnt_parent is @tmp and @opt->mnt_mountpoint is /tmp (Note that @opt->mnt_root is /opt which is what shows up as /opt under SOURCE). So again, a mount will be mounted beneath a preexisting mount. (Fwiw, a few iterations of mount --bind /opt /opt in a loop on a shared rootfs is a good example of what could be referred to as mount explosion.) The main point is that such mounts allows userspace to umount a top mount and reveal an underlying mount. So for example, umounting the tmpfs mount on /mnt that was created in example (1) using mount namespaces reveals the /opt mount which was mounted beneath it. In (2) where a mount was mounted beneath the top mount in the same mount namespace unmounting the top mount would unmount both the top mount and the mount beneath. In the process the original mount would be remounted on top of the rootfs mount / at the /opt dentry again. This again, is a result of mount propagation only this time it's umount propagation. However, this can be avoided by simply making the parent mount / of the @opt mount a private or slave mount. Then the top mount and the original mount can be unmounted to reveal the mount beneath. These two examples are fairly arcane and are merely added to make it clear how mount propagation has effects on current and future features. More common use-cases will just be things like: mount -t btrfs /dev/sdA /mnt mount -t xfs /dev/sdB --beneath /mnt umount /mnt after which we'll have updated from a btrfs filesystem to a xfs filesystem without ever revealing the underlying mountpoint. The crux is that the proposed mechanism already exists and that it is so powerful as to cover cases where mounts are supposed to be updated with new versions. Crucially, it offers an important flexibility. Namely that updates to a system may either be forced or can be delayed and the umount of the top mount be left to a service if it is a cooperative one. This adds a new flag to move_mount() that allows to explicitly move a beneath the top mount adhering to the following semantics: * Mounts cannot be mounted beneath the rootfs. This restriction encompasses the rootfs but also chroots via chroot() and pivot_root(). To mount a mount beneath the rootfs or a chroot, pivot_root() can be used as illustrated above. * The source mount must be a private mount to force the kernel to allocate a new, unused peer group id. This isn't a required restriction but a voluntary one. It avoids repeating a semantical quirk that already exists today. If bind mounts which already have a peer group id are inserted into mount trees that have the same peer group id this can cause a lot of mount propagation events to be generated (For example, consider running mount --bind /opt /opt in a loop where the parent mount is a shared mount.). * Avoid getting rid of the top mount in the kernel. Cooperative services need to be able to unmount the top mount themselves. This also avoids a good deal of additional complexity. The umount would have to be propagated which would be another rather expensive operation. So namespace_lock() and lock_mount_hash() would potentially have to be held for a long time for both a mount and umount propagation. That should be avoided. * The path to mount beneath must be mounted and attached. * The top mount and its parent must be in the caller's mount namespace and the caller must be able to mount in that mount namespace. * The caller must be able to unmount the top mount to prove that they could reveal the underlying mount. * The propagation tree is calculated based on the destination mount's parent mount and the destination mount's mountpoint on the parent mount. Of course, if the parent of the destination mount and the destination mount are shared mounts in the same peer group and the mountpoint of the new mount to be mounted is a subdir of their ->mnt_root then both will receive a mount of /opt. That's probably easier to understand with an example. Assuming a standard shared rootfs /: mount --bind /opt /opt mount --bind /tmp /opt will cause the same mount tree as: mount --bind /opt /opt mount --beneath /tmp /opt because both / and /opt are shared mounts/peers in the same peer group and the /opt dentry is a subdirectory of both the parent's and the child's ->mnt_root. If a mount tree like that is created it almost always is an accident or abuse of mount propagation. Realistically what most people probably mean in this scenarios is: mount --bind /opt /opt mount --make-private /opt mount --make-shared /opt This forces the allocation of a new separate peer group for the /opt mount. Aferwards a mount --bind or mount --beneath actually makes sense as the / and /opt mount belong to different peer groups. Before that it's likely just confusion about what the user wanted to achieve. * Refuse MOVE_MOUNT_BENEATH if: (1) the @mnt_from has been overmounted in between path resolution and acquiring @namespace_sem when locking @mnt_to. This avoids the proliferation of shadow mounts. (2) if @to_mnt is moved to a different mountpoint while acquiring @namespace_sem to lock @to_mnt. (3) if @to_mnt is unmounted while acquiring @namespace_sem to lock @to_mnt. (4) if the parent of the target mount propagates to the target mount at the same mountpoint. This would mean mounting @mnt_from on @mnt_to->mnt_parent and then propagating a copy @c of @mnt_from onto @mnt_to. This defeats the whole purpose of mounting @mnt_from beneath @mnt_to. (5) if the parent mount @mnt_to->mnt_parent propagates to @mnt_from at the same mountpoint. If @mnt_to->mnt_parent propagates to @mnt_from this would mean propagating a copy @c of @mnt_from on top of @mnt_from. Afterwards @mnt_from would be mounted on top of @mnt_to->mnt_parent and @mnt_to would be unmounted from @mnt->mnt_parent and remounted on @mnt_from. But since @c is already mounted on @mnt_from, @mnt_to would ultimately be remounted on top of @c. Afterwards, @mnt_from would be covered by a copy @c of @mnt_from and @c would be covered by @mnt_from itself. This defeats the whole purpose of mounting @mnt_from beneath @mnt_to. Cases (1) to (3) are required as they deal with races that would cause bugs or unexpected behavior for users. Cases (4) and (5) refuse semantical quirks that would not be a bug but would cause weird mount trees to be created. While they can already be created via other means (mount --bind /opt /opt x n) there's no reason to repeat past mistakes in new features. Link: https://man7.org/linux/man-pages/man8/systemd-sysext.8.html [1] Link: https://brauner.io/2023/02/28/mounting-into-mount-namespaces.html [2] Link: https://github.com/flatcar/sysext-bakery Link: https://fedoraproject.org/wiki/Changes/Unified_Kernel_Support_Phase_1 Link: https://fedoraproject.org/wiki/Changes/Unified_Kernel_Support_Phase_2 Link: https://github.com/systemd/systemd/pull/26013 Reviewed-by: Seth Forshee (DigitalOcean) <sforshee@kernel.org> Message-Id: <20230202-fs-move-mount-replace-v4-4-98f3d80d7eaa@kernel.org> Signed-off-by: Christian Brauner <brauner@kernel.org>
2023-05-03 11:18:42 +00:00
struct vfsmount *mnt = path->mnt;
struct dentry *dentry;
fs: allow to mount beneath top mount Various distributions are adding or are in the process of adding support for system extensions and in the future configuration extensions through various tools. A more detailed explanation on system and configuration extensions can be found on the manpage which is listed below at [1]. System extension images may – dynamically at runtime — extend the /usr/ and /opt/ directory hierarchies with additional files. This is particularly useful on immutable system images where a /usr/ and/or /opt/ hierarchy residing on a read-only file system shall be extended temporarily at runtime without making any persistent modifications. When one or more system extension images are activated, their /usr/ and /opt/ hierarchies are combined via overlayfs with the same hierarchies of the host OS, and the host /usr/ and /opt/ overmounted with it ("merging"). When they are deactivated, the mount point is disassembled — again revealing the unmodified original host version of the hierarchy ("unmerging"). Merging thus makes the extension's resources suddenly appear below the /usr/ and /opt/ hierarchies as if they were included in the base OS image itself. Unmerging makes them disappear again, leaving in place only the files that were shipped with the base OS image itself. System configuration images are similar but operate on directories containing system or service configuration. On nearly all modern distributions mount propagation plays a crucial role and the rootfs of the OS is a shared mount in a peer group (usually with peer group id 1): TARGET SOURCE FSTYPE PROPAGATION MNT_ID PARENT_ID / / ext4 shared:1 29 1 On such systems all services and containers run in a separate mount namespace and are pivot_root()ed into their rootfs. A separate mount namespace is almost always used as it is the minimal isolation mechanism services have. But usually they are even much more isolated up to the point where they almost become indistinguishable from containers. Mount propagation again plays a crucial role here. The rootfs of all these services is a slave mount to the peer group of the host rootfs. This is done so the service will receive mount propagation events from the host when certain files or directories are updated. In addition, the rootfs of each service, container, and sandbox is also a shared mount in its separate peer group: TARGET SOURCE FSTYPE PROPAGATION MNT_ID PARENT_ID / / ext4 shared:24 master:1 71 47 For people not too familiar with mount propagation, the master:1 means that this is a slave mount to peer group 1. Which as one can see is the host rootfs as indicated by shared:1 above. The shared:24 indicates that the service rootfs is a shared mount in a separate peer group with peer group id 24. A service may run other services. Such nested services will also have a rootfs mount that is a slave to the peer group of the outer service rootfs mount. For containers things are just slighly different. A container's rootfs isn't a slave to the service's or host rootfs' peer group. The rootfs mount of a container is simply a shared mount in its own peer group: TARGET SOURCE FSTYPE PROPAGATION MNT_ID PARENT_ID /home/ubuntu/debian-tree / ext4 shared:99 61 60 So whereas services are isolated OS components a container is treated like a separate world and mount propagation into it is restricted to a single well known mount that is a slave to the peer group of the shared mount /run on the host: TARGET SOURCE FSTYPE PROPAGATION MNT_ID PARENT_ID /propagate/debian-tree /run/host/incoming tmpfs master:5 71 68 Here, the master:5 indicates that this mount is a slave to the peer group with peer group id 5. This allows to propagate mounts into the container and served as a workaround for not being able to insert mounts into mount namespaces directly. But the new mount api does support inserting mounts directly. For the interested reader the blogpost in [2] might be worth reading where I explain the old and the new approach to inserting mounts into mount namespaces. Containers of course, can themselves be run as services. They often run full systems themselves which means they again run services and containers with the exact same propagation settings explained above. The whole system is designed so that it can be easily updated, including all services in various fine-grained ways without having to enter every single service's mount namespace which would be prohibitively expensive. The mount propagation layout has been carefully chosen so it is possible to propagate updates for system extensions and configurations from the host into all services. The simplest model to update the whole system is to mount on top of /usr, /opt, or /etc on the host. The new mount on /usr, /opt, or /etc will then propagate into every service. This works cleanly the first time. However, when the system is updated multiple times it becomes necessary to unmount the first update on /opt, /usr, /etc and then propagate the new update. But this means, there's an interval where the old base system is accessible. This has to be avoided to protect against downgrade attacks. The vfs already exposes a mechanism to userspace whereby mounts can be mounted beneath an existing mount. Such mounts are internally referred to as "tucked". The patch series exposes the ability to mount beneath a top mount through the new MOVE_MOUNT_BENEATH flag for the move_mount() system call. This allows userspace to seamlessly upgrade mounts. After this series the only thing that will have changed is that mounting beneath an existing mount can be done explicitly instead of just implicitly. Today, there are two scenarios where a mount can be mounted beneath an existing mount instead of on top of it: (1) When a service or container is started in a new mount namespace and pivot_root()s into its new rootfs. The way this is done is by mounting the new rootfs beneath the old rootfs: fd_newroot = open("/var/lib/machines/fedora", ...); fd_oldroot = open("/", ...); fchdir(fd_newroot); pivot_root(".", "."); After the pivot_root(".", ".") call the new rootfs is mounted beneath the old rootfs which can then be unmounted to reveal the underlying mount: fchdir(fd_oldroot); umount2(".", MNT_DETACH); Since pivot_root() moves the caller into a new rootfs no mounts must be propagated out of the new rootfs as a consequence of the pivot_root() call. Thus, the mounts cannot be shared. (2) When a mount is propagated to a mount that already has another mount mounted on the same dentry. The easiest example for this is to create a new mount namespace. The following commands will create a mount namespace where the rootfs mount / will be a slave to the peer group of the host rootfs / mount's peer group. IOW, it will receive propagation from the host: mount --make-shared / unshare --mount --propagation=slave Now a new mount on the /mnt dentry in that mount namespace is created. (As it can be confusing it should be spelled out that the tmpfs mount on the /mnt dentry that was just created doesn't propagate back to the host because the rootfs mount / of the mount namespace isn't a peer of the host rootfs.): mount -t tmpfs tmpfs /mnt TARGET SOURCE FSTYPE PROPAGATION └─/mnt tmpfs tmpfs Now another terminal in the host mount namespace can observe that the mount indeed hasn't propagated back to into the host mount namespace. A new mount can now be created on top of the /mnt dentry with the rootfs mount / as its parent: mount --bind /opt /mnt TARGET SOURCE FSTYPE PROPAGATION └─/mnt /dev/sda2[/opt] ext4 shared:1 The mount namespace that was created earlier can now observe that the bind mount created on the host has propagated into it: TARGET SOURCE FSTYPE PROPAGATION └─/mnt /dev/sda2[/opt] ext4 master:1 └─/mnt tmpfs tmpfs But instead of having been mounted on top of the tmpfs mount at the /mnt dentry the /opt mount has been mounted on top of the rootfs mount at the /mnt dentry. And the tmpfs mount has been remounted on top of the propagated /opt mount at the /opt dentry. So in other words, the propagated mount has been mounted beneath the preexisting mount in that mount namespace. Mount namespaces make this easy to illustrate but it's also easy to mount beneath an existing mount in the same mount namespace (The following example assumes a shared rootfs mount / with peer group id 1): mount --bind /opt /opt TARGET SOURCE FSTYPE MNT_ID PARENT_ID PROPAGATION └─/opt /dev/sda2[/opt] ext4 188 29 shared:1 If another mount is mounted on top of the /opt mount at the /opt dentry: mount --bind /tmp /opt The following clunky mount tree will result: TARGET SOURCE FSTYPE MNT_ID PARENT_ID PROPAGATION └─/opt /dev/sda2[/tmp] ext4 405 29 shared:1 └─/opt /dev/sda2[/opt] ext4 188 405 shared:1 └─/opt /dev/sda2[/tmp] ext4 404 188 shared:1 The /tmp mount is mounted beneath the /opt mount and another copy is mounted on top of the /opt mount. This happens because the rootfs / and the /opt mount are shared mounts in the same peer group. When the new /tmp mount is supposed to be mounted at the /opt dentry then the /tmp mount first propagates to the root mount at the /opt dentry. But there already is the /opt mount mounted at the /opt dentry. So the old /opt mount at the /opt dentry will be mounted on top of the new /tmp mount at the /tmp dentry, i.e. @opt->mnt_parent is @tmp and @opt->mnt_mountpoint is /tmp (Note that @opt->mnt_root is /opt which is what shows up as /opt under SOURCE). So again, a mount will be mounted beneath a preexisting mount. (Fwiw, a few iterations of mount --bind /opt /opt in a loop on a shared rootfs is a good example of what could be referred to as mount explosion.) The main point is that such mounts allows userspace to umount a top mount and reveal an underlying mount. So for example, umounting the tmpfs mount on /mnt that was created in example (1) using mount namespaces reveals the /opt mount which was mounted beneath it. In (2) where a mount was mounted beneath the top mount in the same mount namespace unmounting the top mount would unmount both the top mount and the mount beneath. In the process the original mount would be remounted on top of the rootfs mount / at the /opt dentry again. This again, is a result of mount propagation only this time it's umount propagation. However, this can be avoided by simply making the parent mount / of the @opt mount a private or slave mount. Then the top mount and the original mount can be unmounted to reveal the mount beneath. These two examples are fairly arcane and are merely added to make it clear how mount propagation has effects on current and future features. More common use-cases will just be things like: mount -t btrfs /dev/sdA /mnt mount -t xfs /dev/sdB --beneath /mnt umount /mnt after which we'll have updated from a btrfs filesystem to a xfs filesystem without ever revealing the underlying mountpoint. The crux is that the proposed mechanism already exists and that it is so powerful as to cover cases where mounts are supposed to be updated with new versions. Crucially, it offers an important flexibility. Namely that updates to a system may either be forced or can be delayed and the umount of the top mount be left to a service if it is a cooperative one. This adds a new flag to move_mount() that allows to explicitly move a beneath the top mount adhering to the following semantics: * Mounts cannot be mounted beneath the rootfs. This restriction encompasses the rootfs but also chroots via chroot() and pivot_root(). To mount a mount beneath the rootfs or a chroot, pivot_root() can be used as illustrated above. * The source mount must be a private mount to force the kernel to allocate a new, unused peer group id. This isn't a required restriction but a voluntary one. It avoids repeating a semantical quirk that already exists today. If bind mounts which already have a peer group id are inserted into mount trees that have the same peer group id this can cause a lot of mount propagation events to be generated (For example, consider running mount --bind /opt /opt in a loop where the parent mount is a shared mount.). * Avoid getting rid of the top mount in the kernel. Cooperative services need to be able to unmount the top mount themselves. This also avoids a good deal of additional complexity. The umount would have to be propagated which would be another rather expensive operation. So namespace_lock() and lock_mount_hash() would potentially have to be held for a long time for both a mount and umount propagation. That should be avoided. * The path to mount beneath must be mounted and attached. * The top mount and its parent must be in the caller's mount namespace and the caller must be able to mount in that mount namespace. * The caller must be able to unmount the top mount to prove that they could reveal the underlying mount. * The propagation tree is calculated based on the destination mount's parent mount and the destination mount's mountpoint on the parent mount. Of course, if the parent of the destination mount and the destination mount are shared mounts in the same peer group and the mountpoint of the new mount to be mounted is a subdir of their ->mnt_root then both will receive a mount of /opt. That's probably easier to understand with an example. Assuming a standard shared rootfs /: mount --bind /opt /opt mount --bind /tmp /opt will cause the same mount tree as: mount --bind /opt /opt mount --beneath /tmp /opt because both / and /opt are shared mounts/peers in the same peer group and the /opt dentry is a subdirectory of both the parent's and the child's ->mnt_root. If a mount tree like that is created it almost always is an accident or abuse of mount propagation. Realistically what most people probably mean in this scenarios is: mount --bind /opt /opt mount --make-private /opt mount --make-shared /opt This forces the allocation of a new separate peer group for the /opt mount. Aferwards a mount --bind or mount --beneath actually makes sense as the / and /opt mount belong to different peer groups. Before that it's likely just confusion about what the user wanted to achieve. * Refuse MOVE_MOUNT_BENEATH if: (1) the @mnt_from has been overmounted in between path resolution and acquiring @namespace_sem when locking @mnt_to. This avoids the proliferation of shadow mounts. (2) if @to_mnt is moved to a different mountpoint while acquiring @namespace_sem to lock @to_mnt. (3) if @to_mnt is unmounted while acquiring @namespace_sem to lock @to_mnt. (4) if the parent of the target mount propagates to the target mount at the same mountpoint. This would mean mounting @mnt_from on @mnt_to->mnt_parent and then propagating a copy @c of @mnt_from onto @mnt_to. This defeats the whole purpose of mounting @mnt_from beneath @mnt_to. (5) if the parent mount @mnt_to->mnt_parent propagates to @mnt_from at the same mountpoint. If @mnt_to->mnt_parent propagates to @mnt_from this would mean propagating a copy @c of @mnt_from on top of @mnt_from. Afterwards @mnt_from would be mounted on top of @mnt_to->mnt_parent and @mnt_to would be unmounted from @mnt->mnt_parent and remounted on @mnt_from. But since @c is already mounted on @mnt_from, @mnt_to would ultimately be remounted on top of @c. Afterwards, @mnt_from would be covered by a copy @c of @mnt_from and @c would be covered by @mnt_from itself. This defeats the whole purpose of mounting @mnt_from beneath @mnt_to. Cases (1) to (3) are required as they deal with races that would cause bugs or unexpected behavior for users. Cases (4) and (5) refuse semantical quirks that would not be a bug but would cause weird mount trees to be created. While they can already be created via other means (mount --bind /opt /opt x n) there's no reason to repeat past mistakes in new features. Link: https://man7.org/linux/man-pages/man8/systemd-sysext.8.html [1] Link: https://brauner.io/2023/02/28/mounting-into-mount-namespaces.html [2] Link: https://github.com/flatcar/sysext-bakery Link: https://fedoraproject.org/wiki/Changes/Unified_Kernel_Support_Phase_1 Link: https://fedoraproject.org/wiki/Changes/Unified_Kernel_Support_Phase_2 Link: https://github.com/systemd/systemd/pull/26013 Reviewed-by: Seth Forshee (DigitalOcean) <sforshee@kernel.org> Message-Id: <20230202-fs-move-mount-replace-v4-4-98f3d80d7eaa@kernel.org> Signed-off-by: Christian Brauner <brauner@kernel.org>
2023-05-03 11:18:42 +00:00
struct mountpoint *mp = ERR_PTR(-ENOENT);
for (;;) {
fs: allow to mount beneath top mount Various distributions are adding or are in the process of adding support for system extensions and in the future configuration extensions through various tools. A more detailed explanation on system and configuration extensions can be found on the manpage which is listed below at [1]. System extension images may – dynamically at runtime — extend the /usr/ and /opt/ directory hierarchies with additional files. This is particularly useful on immutable system images where a /usr/ and/or /opt/ hierarchy residing on a read-only file system shall be extended temporarily at runtime without making any persistent modifications. When one or more system extension images are activated, their /usr/ and /opt/ hierarchies are combined via overlayfs with the same hierarchies of the host OS, and the host /usr/ and /opt/ overmounted with it ("merging"). When they are deactivated, the mount point is disassembled — again revealing the unmodified original host version of the hierarchy ("unmerging"). Merging thus makes the extension's resources suddenly appear below the /usr/ and /opt/ hierarchies as if they were included in the base OS image itself. Unmerging makes them disappear again, leaving in place only the files that were shipped with the base OS image itself. System configuration images are similar but operate on directories containing system or service configuration. On nearly all modern distributions mount propagation plays a crucial role and the rootfs of the OS is a shared mount in a peer group (usually with peer group id 1): TARGET SOURCE FSTYPE PROPAGATION MNT_ID PARENT_ID / / ext4 shared:1 29 1 On such systems all services and containers run in a separate mount namespace and are pivot_root()ed into their rootfs. A separate mount namespace is almost always used as it is the minimal isolation mechanism services have. But usually they are even much more isolated up to the point where they almost become indistinguishable from containers. Mount propagation again plays a crucial role here. The rootfs of all these services is a slave mount to the peer group of the host rootfs. This is done so the service will receive mount propagation events from the host when certain files or directories are updated. In addition, the rootfs of each service, container, and sandbox is also a shared mount in its separate peer group: TARGET SOURCE FSTYPE PROPAGATION MNT_ID PARENT_ID / / ext4 shared:24 master:1 71 47 For people not too familiar with mount propagation, the master:1 means that this is a slave mount to peer group 1. Which as one can see is the host rootfs as indicated by shared:1 above. The shared:24 indicates that the service rootfs is a shared mount in a separate peer group with peer group id 24. A service may run other services. Such nested services will also have a rootfs mount that is a slave to the peer group of the outer service rootfs mount. For containers things are just slighly different. A container's rootfs isn't a slave to the service's or host rootfs' peer group. The rootfs mount of a container is simply a shared mount in its own peer group: TARGET SOURCE FSTYPE PROPAGATION MNT_ID PARENT_ID /home/ubuntu/debian-tree / ext4 shared:99 61 60 So whereas services are isolated OS components a container is treated like a separate world and mount propagation into it is restricted to a single well known mount that is a slave to the peer group of the shared mount /run on the host: TARGET SOURCE FSTYPE PROPAGATION MNT_ID PARENT_ID /propagate/debian-tree /run/host/incoming tmpfs master:5 71 68 Here, the master:5 indicates that this mount is a slave to the peer group with peer group id 5. This allows to propagate mounts into the container and served as a workaround for not being able to insert mounts into mount namespaces directly. But the new mount api does support inserting mounts directly. For the interested reader the blogpost in [2] might be worth reading where I explain the old and the new approach to inserting mounts into mount namespaces. Containers of course, can themselves be run as services. They often run full systems themselves which means they again run services and containers with the exact same propagation settings explained above. The whole system is designed so that it can be easily updated, including all services in various fine-grained ways without having to enter every single service's mount namespace which would be prohibitively expensive. The mount propagation layout has been carefully chosen so it is possible to propagate updates for system extensions and configurations from the host into all services. The simplest model to update the whole system is to mount on top of /usr, /opt, or /etc on the host. The new mount on /usr, /opt, or /etc will then propagate into every service. This works cleanly the first time. However, when the system is updated multiple times it becomes necessary to unmount the first update on /opt, /usr, /etc and then propagate the new update. But this means, there's an interval where the old base system is accessible. This has to be avoided to protect against downgrade attacks. The vfs already exposes a mechanism to userspace whereby mounts can be mounted beneath an existing mount. Such mounts are internally referred to as "tucked". The patch series exposes the ability to mount beneath a top mount through the new MOVE_MOUNT_BENEATH flag for the move_mount() system call. This allows userspace to seamlessly upgrade mounts. After this series the only thing that will have changed is that mounting beneath an existing mount can be done explicitly instead of just implicitly. Today, there are two scenarios where a mount can be mounted beneath an existing mount instead of on top of it: (1) When a service or container is started in a new mount namespace and pivot_root()s into its new rootfs. The way this is done is by mounting the new rootfs beneath the old rootfs: fd_newroot = open("/var/lib/machines/fedora", ...); fd_oldroot = open("/", ...); fchdir(fd_newroot); pivot_root(".", "."); After the pivot_root(".", ".") call the new rootfs is mounted beneath the old rootfs which can then be unmounted to reveal the underlying mount: fchdir(fd_oldroot); umount2(".", MNT_DETACH); Since pivot_root() moves the caller into a new rootfs no mounts must be propagated out of the new rootfs as a consequence of the pivot_root() call. Thus, the mounts cannot be shared. (2) When a mount is propagated to a mount that already has another mount mounted on the same dentry. The easiest example for this is to create a new mount namespace. The following commands will create a mount namespace where the rootfs mount / will be a slave to the peer group of the host rootfs / mount's peer group. IOW, it will receive propagation from the host: mount --make-shared / unshare --mount --propagation=slave Now a new mount on the /mnt dentry in that mount namespace is created. (As it can be confusing it should be spelled out that the tmpfs mount on the /mnt dentry that was just created doesn't propagate back to the host because the rootfs mount / of the mount namespace isn't a peer of the host rootfs.): mount -t tmpfs tmpfs /mnt TARGET SOURCE FSTYPE PROPAGATION └─/mnt tmpfs tmpfs Now another terminal in the host mount namespace can observe that the mount indeed hasn't propagated back to into the host mount namespace. A new mount can now be created on top of the /mnt dentry with the rootfs mount / as its parent: mount --bind /opt /mnt TARGET SOURCE FSTYPE PROPAGATION └─/mnt /dev/sda2[/opt] ext4 shared:1 The mount namespace that was created earlier can now observe that the bind mount created on the host has propagated into it: TARGET SOURCE FSTYPE PROPAGATION └─/mnt /dev/sda2[/opt] ext4 master:1 └─/mnt tmpfs tmpfs But instead of having been mounted on top of the tmpfs mount at the /mnt dentry the /opt mount has been mounted on top of the rootfs mount at the /mnt dentry. And the tmpfs mount has been remounted on top of the propagated /opt mount at the /opt dentry. So in other words, the propagated mount has been mounted beneath the preexisting mount in that mount namespace. Mount namespaces make this easy to illustrate but it's also easy to mount beneath an existing mount in the same mount namespace (The following example assumes a shared rootfs mount / with peer group id 1): mount --bind /opt /opt TARGET SOURCE FSTYPE MNT_ID PARENT_ID PROPAGATION └─/opt /dev/sda2[/opt] ext4 188 29 shared:1 If another mount is mounted on top of the /opt mount at the /opt dentry: mount --bind /tmp /opt The following clunky mount tree will result: TARGET SOURCE FSTYPE MNT_ID PARENT_ID PROPAGATION └─/opt /dev/sda2[/tmp] ext4 405 29 shared:1 └─/opt /dev/sda2[/opt] ext4 188 405 shared:1 └─/opt /dev/sda2[/tmp] ext4 404 188 shared:1 The /tmp mount is mounted beneath the /opt mount and another copy is mounted on top of the /opt mount. This happens because the rootfs / and the /opt mount are shared mounts in the same peer group. When the new /tmp mount is supposed to be mounted at the /opt dentry then the /tmp mount first propagates to the root mount at the /opt dentry. But there already is the /opt mount mounted at the /opt dentry. So the old /opt mount at the /opt dentry will be mounted on top of the new /tmp mount at the /tmp dentry, i.e. @opt->mnt_parent is @tmp and @opt->mnt_mountpoint is /tmp (Note that @opt->mnt_root is /opt which is what shows up as /opt under SOURCE). So again, a mount will be mounted beneath a preexisting mount. (Fwiw, a few iterations of mount --bind /opt /opt in a loop on a shared rootfs is a good example of what could be referred to as mount explosion.) The main point is that such mounts allows userspace to umount a top mount and reveal an underlying mount. So for example, umounting the tmpfs mount on /mnt that was created in example (1) using mount namespaces reveals the /opt mount which was mounted beneath it. In (2) where a mount was mounted beneath the top mount in the same mount namespace unmounting the top mount would unmount both the top mount and the mount beneath. In the process the original mount would be remounted on top of the rootfs mount / at the /opt dentry again. This again, is a result of mount propagation only this time it's umount propagation. However, this can be avoided by simply making the parent mount / of the @opt mount a private or slave mount. Then the top mount and the original mount can be unmounted to reveal the mount beneath. These two examples are fairly arcane and are merely added to make it clear how mount propagation has effects on current and future features. More common use-cases will just be things like: mount -t btrfs /dev/sdA /mnt mount -t xfs /dev/sdB --beneath /mnt umount /mnt after which we'll have updated from a btrfs filesystem to a xfs filesystem without ever revealing the underlying mountpoint. The crux is that the proposed mechanism already exists and that it is so powerful as to cover cases where mounts are supposed to be updated with new versions. Crucially, it offers an important flexibility. Namely that updates to a system may either be forced or can be delayed and the umount of the top mount be left to a service if it is a cooperative one. This adds a new flag to move_mount() that allows to explicitly move a beneath the top mount adhering to the following semantics: * Mounts cannot be mounted beneath the rootfs. This restriction encompasses the rootfs but also chroots via chroot() and pivot_root(). To mount a mount beneath the rootfs or a chroot, pivot_root() can be used as illustrated above. * The source mount must be a private mount to force the kernel to allocate a new, unused peer group id. This isn't a required restriction but a voluntary one. It avoids repeating a semantical quirk that already exists today. If bind mounts which already have a peer group id are inserted into mount trees that have the same peer group id this can cause a lot of mount propagation events to be generated (For example, consider running mount --bind /opt /opt in a loop where the parent mount is a shared mount.). * Avoid getting rid of the top mount in the kernel. Cooperative services need to be able to unmount the top mount themselves. This also avoids a good deal of additional complexity. The umount would have to be propagated which would be another rather expensive operation. So namespace_lock() and lock_mount_hash() would potentially have to be held for a long time for both a mount and umount propagation. That should be avoided. * The path to mount beneath must be mounted and attached. * The top mount and its parent must be in the caller's mount namespace and the caller must be able to mount in that mount namespace. * The caller must be able to unmount the top mount to prove that they could reveal the underlying mount. * The propagation tree is calculated based on the destination mount's parent mount and the destination mount's mountpoint on the parent mount. Of course, if the parent of the destination mount and the destination mount are shared mounts in the same peer group and the mountpoint of the new mount to be mounted is a subdir of their ->mnt_root then both will receive a mount of /opt. That's probably easier to understand with an example. Assuming a standard shared rootfs /: mount --bind /opt /opt mount --bind /tmp /opt will cause the same mount tree as: mount --bind /opt /opt mount --beneath /tmp /opt because both / and /opt are shared mounts/peers in the same peer group and the /opt dentry is a subdirectory of both the parent's and the child's ->mnt_root. If a mount tree like that is created it almost always is an accident or abuse of mount propagation. Realistically what most people probably mean in this scenarios is: mount --bind /opt /opt mount --make-private /opt mount --make-shared /opt This forces the allocation of a new separate peer group for the /opt mount. Aferwards a mount --bind or mount --beneath actually makes sense as the / and /opt mount belong to different peer groups. Before that it's likely just confusion about what the user wanted to achieve. * Refuse MOVE_MOUNT_BENEATH if: (1) the @mnt_from has been overmounted in between path resolution and acquiring @namespace_sem when locking @mnt_to. This avoids the proliferation of shadow mounts. (2) if @to_mnt is moved to a different mountpoint while acquiring @namespace_sem to lock @to_mnt. (3) if @to_mnt is unmounted while acquiring @namespace_sem to lock @to_mnt. (4) if the parent of the target mount propagates to the target mount at the same mountpoint. This would mean mounting @mnt_from on @mnt_to->mnt_parent and then propagating a copy @c of @mnt_from onto @mnt_to. This defeats the whole purpose of mounting @mnt_from beneath @mnt_to. (5) if the parent mount @mnt_to->mnt_parent propagates to @mnt_from at the same mountpoint. If @mnt_to->mnt_parent propagates to @mnt_from this would mean propagating a copy @c of @mnt_from on top of @mnt_from. Afterwards @mnt_from would be mounted on top of @mnt_to->mnt_parent and @mnt_to would be unmounted from @mnt->mnt_parent and remounted on @mnt_from. But since @c is already mounted on @mnt_from, @mnt_to would ultimately be remounted on top of @c. Afterwards, @mnt_from would be covered by a copy @c of @mnt_from and @c would be covered by @mnt_from itself. This defeats the whole purpose of mounting @mnt_from beneath @mnt_to. Cases (1) to (3) are required as they deal with races that would cause bugs or unexpected behavior for users. Cases (4) and (5) refuse semantical quirks that would not be a bug but would cause weird mount trees to be created. While they can already be created via other means (mount --bind /opt /opt x n) there's no reason to repeat past mistakes in new features. Link: https://man7.org/linux/man-pages/man8/systemd-sysext.8.html [1] Link: https://brauner.io/2023/02/28/mounting-into-mount-namespaces.html [2] Link: https://github.com/flatcar/sysext-bakery Link: https://fedoraproject.org/wiki/Changes/Unified_Kernel_Support_Phase_1 Link: https://fedoraproject.org/wiki/Changes/Unified_Kernel_Support_Phase_2 Link: https://github.com/systemd/systemd/pull/26013 Reviewed-by: Seth Forshee (DigitalOcean) <sforshee@kernel.org> Message-Id: <20230202-fs-move-mount-replace-v4-4-98f3d80d7eaa@kernel.org> Signed-off-by: Christian Brauner <brauner@kernel.org>
2023-05-03 11:18:42 +00:00
struct mount *m;
if (beneath) {
m = real_mount(mnt);
read_seqlock_excl(&mount_lock);
dentry = dget(m->mnt_mountpoint);
read_sequnlock_excl(&mount_lock);
} else {
dentry = path->dentry;
}
inode_lock(dentry->d_inode);
if (unlikely(cant_mount(dentry))) {
inode_unlock(dentry->d_inode);
fs: allow to mount beneath top mount Various distributions are adding or are in the process of adding support for system extensions and in the future configuration extensions through various tools. A more detailed explanation on system and configuration extensions can be found on the manpage which is listed below at [1]. System extension images may – dynamically at runtime — extend the /usr/ and /opt/ directory hierarchies with additional files. This is particularly useful on immutable system images where a /usr/ and/or /opt/ hierarchy residing on a read-only file system shall be extended temporarily at runtime without making any persistent modifications. When one or more system extension images are activated, their /usr/ and /opt/ hierarchies are combined via overlayfs with the same hierarchies of the host OS, and the host /usr/ and /opt/ overmounted with it ("merging"). When they are deactivated, the mount point is disassembled — again revealing the unmodified original host version of the hierarchy ("unmerging"). Merging thus makes the extension's resources suddenly appear below the /usr/ and /opt/ hierarchies as if they were included in the base OS image itself. Unmerging makes them disappear again, leaving in place only the files that were shipped with the base OS image itself. System configuration images are similar but operate on directories containing system or service configuration. On nearly all modern distributions mount propagation plays a crucial role and the rootfs of the OS is a shared mount in a peer group (usually with peer group id 1): TARGET SOURCE FSTYPE PROPAGATION MNT_ID PARENT_ID / / ext4 shared:1 29 1 On such systems all services and containers run in a separate mount namespace and are pivot_root()ed into their rootfs. A separate mount namespace is almost always used as it is the minimal isolation mechanism services have. But usually they are even much more isolated up to the point where they almost become indistinguishable from containers. Mount propagation again plays a crucial role here. The rootfs of all these services is a slave mount to the peer group of the host rootfs. This is done so the service will receive mount propagation events from the host when certain files or directories are updated. In addition, the rootfs of each service, container, and sandbox is also a shared mount in its separate peer group: TARGET SOURCE FSTYPE PROPAGATION MNT_ID PARENT_ID / / ext4 shared:24 master:1 71 47 For people not too familiar with mount propagation, the master:1 means that this is a slave mount to peer group 1. Which as one can see is the host rootfs as indicated by shared:1 above. The shared:24 indicates that the service rootfs is a shared mount in a separate peer group with peer group id 24. A service may run other services. Such nested services will also have a rootfs mount that is a slave to the peer group of the outer service rootfs mount. For containers things are just slighly different. A container's rootfs isn't a slave to the service's or host rootfs' peer group. The rootfs mount of a container is simply a shared mount in its own peer group: TARGET SOURCE FSTYPE PROPAGATION MNT_ID PARENT_ID /home/ubuntu/debian-tree / ext4 shared:99 61 60 So whereas services are isolated OS components a container is treated like a separate world and mount propagation into it is restricted to a single well known mount that is a slave to the peer group of the shared mount /run on the host: TARGET SOURCE FSTYPE PROPAGATION MNT_ID PARENT_ID /propagate/debian-tree /run/host/incoming tmpfs master:5 71 68 Here, the master:5 indicates that this mount is a slave to the peer group with peer group id 5. This allows to propagate mounts into the container and served as a workaround for not being able to insert mounts into mount namespaces directly. But the new mount api does support inserting mounts directly. For the interested reader the blogpost in [2] might be worth reading where I explain the old and the new approach to inserting mounts into mount namespaces. Containers of course, can themselves be run as services. They often run full systems themselves which means they again run services and containers with the exact same propagation settings explained above. The whole system is designed so that it can be easily updated, including all services in various fine-grained ways without having to enter every single service's mount namespace which would be prohibitively expensive. The mount propagation layout has been carefully chosen so it is possible to propagate updates for system extensions and configurations from the host into all services. The simplest model to update the whole system is to mount on top of /usr, /opt, or /etc on the host. The new mount on /usr, /opt, or /etc will then propagate into every service. This works cleanly the first time. However, when the system is updated multiple times it becomes necessary to unmount the first update on /opt, /usr, /etc and then propagate the new update. But this means, there's an interval where the old base system is accessible. This has to be avoided to protect against downgrade attacks. The vfs already exposes a mechanism to userspace whereby mounts can be mounted beneath an existing mount. Such mounts are internally referred to as "tucked". The patch series exposes the ability to mount beneath a top mount through the new MOVE_MOUNT_BENEATH flag for the move_mount() system call. This allows userspace to seamlessly upgrade mounts. After this series the only thing that will have changed is that mounting beneath an existing mount can be done explicitly instead of just implicitly. Today, there are two scenarios where a mount can be mounted beneath an existing mount instead of on top of it: (1) When a service or container is started in a new mount namespace and pivot_root()s into its new rootfs. The way this is done is by mounting the new rootfs beneath the old rootfs: fd_newroot = open("/var/lib/machines/fedora", ...); fd_oldroot = open("/", ...); fchdir(fd_newroot); pivot_root(".", "."); After the pivot_root(".", ".") call the new rootfs is mounted beneath the old rootfs which can then be unmounted to reveal the underlying mount: fchdir(fd_oldroot); umount2(".", MNT_DETACH); Since pivot_root() moves the caller into a new rootfs no mounts must be propagated out of the new rootfs as a consequence of the pivot_root() call. Thus, the mounts cannot be shared. (2) When a mount is propagated to a mount that already has another mount mounted on the same dentry. The easiest example for this is to create a new mount namespace. The following commands will create a mount namespace where the rootfs mount / will be a slave to the peer group of the host rootfs / mount's peer group. IOW, it will receive propagation from the host: mount --make-shared / unshare --mount --propagation=slave Now a new mount on the /mnt dentry in that mount namespace is created. (As it can be confusing it should be spelled out that the tmpfs mount on the /mnt dentry that was just created doesn't propagate back to the host because the rootfs mount / of the mount namespace isn't a peer of the host rootfs.): mount -t tmpfs tmpfs /mnt TARGET SOURCE FSTYPE PROPAGATION └─/mnt tmpfs tmpfs Now another terminal in the host mount namespace can observe that the mount indeed hasn't propagated back to into the host mount namespace. A new mount can now be created on top of the /mnt dentry with the rootfs mount / as its parent: mount --bind /opt /mnt TARGET SOURCE FSTYPE PROPAGATION └─/mnt /dev/sda2[/opt] ext4 shared:1 The mount namespace that was created earlier can now observe that the bind mount created on the host has propagated into it: TARGET SOURCE FSTYPE PROPAGATION └─/mnt /dev/sda2[/opt] ext4 master:1 └─/mnt tmpfs tmpfs But instead of having been mounted on top of the tmpfs mount at the /mnt dentry the /opt mount has been mounted on top of the rootfs mount at the /mnt dentry. And the tmpfs mount has been remounted on top of the propagated /opt mount at the /opt dentry. So in other words, the propagated mount has been mounted beneath the preexisting mount in that mount namespace. Mount namespaces make this easy to illustrate but it's also easy to mount beneath an existing mount in the same mount namespace (The following example assumes a shared rootfs mount / with peer group id 1): mount --bind /opt /opt TARGET SOURCE FSTYPE MNT_ID PARENT_ID PROPAGATION └─/opt /dev/sda2[/opt] ext4 188 29 shared:1 If another mount is mounted on top of the /opt mount at the /opt dentry: mount --bind /tmp /opt The following clunky mount tree will result: TARGET SOURCE FSTYPE MNT_ID PARENT_ID PROPAGATION └─/opt /dev/sda2[/tmp] ext4 405 29 shared:1 └─/opt /dev/sda2[/opt] ext4 188 405 shared:1 └─/opt /dev/sda2[/tmp] ext4 404 188 shared:1 The /tmp mount is mounted beneath the /opt mount and another copy is mounted on top of the /opt mount. This happens because the rootfs / and the /opt mount are shared mounts in the same peer group. When the new /tmp mount is supposed to be mounted at the /opt dentry then the /tmp mount first propagates to the root mount at the /opt dentry. But there already is the /opt mount mounted at the /opt dentry. So the old /opt mount at the /opt dentry will be mounted on top of the new /tmp mount at the /tmp dentry, i.e. @opt->mnt_parent is @tmp and @opt->mnt_mountpoint is /tmp (Note that @opt->mnt_root is /opt which is what shows up as /opt under SOURCE). So again, a mount will be mounted beneath a preexisting mount. (Fwiw, a few iterations of mount --bind /opt /opt in a loop on a shared rootfs is a good example of what could be referred to as mount explosion.) The main point is that such mounts allows userspace to umount a top mount and reveal an underlying mount. So for example, umounting the tmpfs mount on /mnt that was created in example (1) using mount namespaces reveals the /opt mount which was mounted beneath it. In (2) where a mount was mounted beneath the top mount in the same mount namespace unmounting the top mount would unmount both the top mount and the mount beneath. In the process the original mount would be remounted on top of the rootfs mount / at the /opt dentry again. This again, is a result of mount propagation only this time it's umount propagation. However, this can be avoided by simply making the parent mount / of the @opt mount a private or slave mount. Then the top mount and the original mount can be unmounted to reveal the mount beneath. These two examples are fairly arcane and are merely added to make it clear how mount propagation has effects on current and future features. More common use-cases will just be things like: mount -t btrfs /dev/sdA /mnt mount -t xfs /dev/sdB --beneath /mnt umount /mnt after which we'll have updated from a btrfs filesystem to a xfs filesystem without ever revealing the underlying mountpoint. The crux is that the proposed mechanism already exists and that it is so powerful as to cover cases where mounts are supposed to be updated with new versions. Crucially, it offers an important flexibility. Namely that updates to a system may either be forced or can be delayed and the umount of the top mount be left to a service if it is a cooperative one. This adds a new flag to move_mount() that allows to explicitly move a beneath the top mount adhering to the following semantics: * Mounts cannot be mounted beneath the rootfs. This restriction encompasses the rootfs but also chroots via chroot() and pivot_root(). To mount a mount beneath the rootfs or a chroot, pivot_root() can be used as illustrated above. * The source mount must be a private mount to force the kernel to allocate a new, unused peer group id. This isn't a required restriction but a voluntary one. It avoids repeating a semantical quirk that already exists today. If bind mounts which already have a peer group id are inserted into mount trees that have the same peer group id this can cause a lot of mount propagation events to be generated (For example, consider running mount --bind /opt /opt in a loop where the parent mount is a shared mount.). * Avoid getting rid of the top mount in the kernel. Cooperative services need to be able to unmount the top mount themselves. This also avoids a good deal of additional complexity. The umount would have to be propagated which would be another rather expensive operation. So namespace_lock() and lock_mount_hash() would potentially have to be held for a long time for both a mount and umount propagation. That should be avoided. * The path to mount beneath must be mounted and attached. * The top mount and its parent must be in the caller's mount namespace and the caller must be able to mount in that mount namespace. * The caller must be able to unmount the top mount to prove that they could reveal the underlying mount. * The propagation tree is calculated based on the destination mount's parent mount and the destination mount's mountpoint on the parent mount. Of course, if the parent of the destination mount and the destination mount are shared mounts in the same peer group and the mountpoint of the new mount to be mounted is a subdir of their ->mnt_root then both will receive a mount of /opt. That's probably easier to understand with an example. Assuming a standard shared rootfs /: mount --bind /opt /opt mount --bind /tmp /opt will cause the same mount tree as: mount --bind /opt /opt mount --beneath /tmp /opt because both / and /opt are shared mounts/peers in the same peer group and the /opt dentry is a subdirectory of both the parent's and the child's ->mnt_root. If a mount tree like that is created it almost always is an accident or abuse of mount propagation. Realistically what most people probably mean in this scenarios is: mount --bind /opt /opt mount --make-private /opt mount --make-shared /opt This forces the allocation of a new separate peer group for the /opt mount. Aferwards a mount --bind or mount --beneath actually makes sense as the / and /opt mount belong to different peer groups. Before that it's likely just confusion about what the user wanted to achieve. * Refuse MOVE_MOUNT_BENEATH if: (1) the @mnt_from has been overmounted in between path resolution and acquiring @namespace_sem when locking @mnt_to. This avoids the proliferation of shadow mounts. (2) if @to_mnt is moved to a different mountpoint while acquiring @namespace_sem to lock @to_mnt. (3) if @to_mnt is unmounted while acquiring @namespace_sem to lock @to_mnt. (4) if the parent of the target mount propagates to the target mount at the same mountpoint. This would mean mounting @mnt_from on @mnt_to->mnt_parent and then propagating a copy @c of @mnt_from onto @mnt_to. This defeats the whole purpose of mounting @mnt_from beneath @mnt_to. (5) if the parent mount @mnt_to->mnt_parent propagates to @mnt_from at the same mountpoint. If @mnt_to->mnt_parent propagates to @mnt_from this would mean propagating a copy @c of @mnt_from on top of @mnt_from. Afterwards @mnt_from would be mounted on top of @mnt_to->mnt_parent and @mnt_to would be unmounted from @mnt->mnt_parent and remounted on @mnt_from. But since @c is already mounted on @mnt_from, @mnt_to would ultimately be remounted on top of @c. Afterwards, @mnt_from would be covered by a copy @c of @mnt_from and @c would be covered by @mnt_from itself. This defeats the whole purpose of mounting @mnt_from beneath @mnt_to. Cases (1) to (3) are required as they deal with races that would cause bugs or unexpected behavior for users. Cases (4) and (5) refuse semantical quirks that would not be a bug but would cause weird mount trees to be created. While they can already be created via other means (mount --bind /opt /opt x n) there's no reason to repeat past mistakes in new features. Link: https://man7.org/linux/man-pages/man8/systemd-sysext.8.html [1] Link: https://brauner.io/2023/02/28/mounting-into-mount-namespaces.html [2] Link: https://github.com/flatcar/sysext-bakery Link: https://fedoraproject.org/wiki/Changes/Unified_Kernel_Support_Phase_1 Link: https://fedoraproject.org/wiki/Changes/Unified_Kernel_Support_Phase_2 Link: https://github.com/systemd/systemd/pull/26013 Reviewed-by: Seth Forshee (DigitalOcean) <sforshee@kernel.org> Message-Id: <20230202-fs-move-mount-replace-v4-4-98f3d80d7eaa@kernel.org> Signed-off-by: Christian Brauner <brauner@kernel.org>
2023-05-03 11:18:42 +00:00
goto out;
}
namespace_lock();
fs: allow to mount beneath top mount Various distributions are adding or are in the process of adding support for system extensions and in the future configuration extensions through various tools. A more detailed explanation on system and configuration extensions can be found on the manpage which is listed below at [1]. System extension images may – dynamically at runtime — extend the /usr/ and /opt/ directory hierarchies with additional files. This is particularly useful on immutable system images where a /usr/ and/or /opt/ hierarchy residing on a read-only file system shall be extended temporarily at runtime without making any persistent modifications. When one or more system extension images are activated, their /usr/ and /opt/ hierarchies are combined via overlayfs with the same hierarchies of the host OS, and the host /usr/ and /opt/ overmounted with it ("merging"). When they are deactivated, the mount point is disassembled — again revealing the unmodified original host version of the hierarchy ("unmerging"). Merging thus makes the extension's resources suddenly appear below the /usr/ and /opt/ hierarchies as if they were included in the base OS image itself. Unmerging makes them disappear again, leaving in place only the files that were shipped with the base OS image itself. System configuration images are similar but operate on directories containing system or service configuration. On nearly all modern distributions mount propagation plays a crucial role and the rootfs of the OS is a shared mount in a peer group (usually with peer group id 1): TARGET SOURCE FSTYPE PROPAGATION MNT_ID PARENT_ID / / ext4 shared:1 29 1 On such systems all services and containers run in a separate mount namespace and are pivot_root()ed into their rootfs. A separate mount namespace is almost always used as it is the minimal isolation mechanism services have. But usually they are even much more isolated up to the point where they almost become indistinguishable from containers. Mount propagation again plays a crucial role here. The rootfs of all these services is a slave mount to the peer group of the host rootfs. This is done so the service will receive mount propagation events from the host when certain files or directories are updated. In addition, the rootfs of each service, container, and sandbox is also a shared mount in its separate peer group: TARGET SOURCE FSTYPE PROPAGATION MNT_ID PARENT_ID / / ext4 shared:24 master:1 71 47 For people not too familiar with mount propagation, the master:1 means that this is a slave mount to peer group 1. Which as one can see is the host rootfs as indicated by shared:1 above. The shared:24 indicates that the service rootfs is a shared mount in a separate peer group with peer group id 24. A service may run other services. Such nested services will also have a rootfs mount that is a slave to the peer group of the outer service rootfs mount. For containers things are just slighly different. A container's rootfs isn't a slave to the service's or host rootfs' peer group. The rootfs mount of a container is simply a shared mount in its own peer group: TARGET SOURCE FSTYPE PROPAGATION MNT_ID PARENT_ID /home/ubuntu/debian-tree / ext4 shared:99 61 60 So whereas services are isolated OS components a container is treated like a separate world and mount propagation into it is restricted to a single well known mount that is a slave to the peer group of the shared mount /run on the host: TARGET SOURCE FSTYPE PROPAGATION MNT_ID PARENT_ID /propagate/debian-tree /run/host/incoming tmpfs master:5 71 68 Here, the master:5 indicates that this mount is a slave to the peer group with peer group id 5. This allows to propagate mounts into the container and served as a workaround for not being able to insert mounts into mount namespaces directly. But the new mount api does support inserting mounts directly. For the interested reader the blogpost in [2] might be worth reading where I explain the old and the new approach to inserting mounts into mount namespaces. Containers of course, can themselves be run as services. They often run full systems themselves which means they again run services and containers with the exact same propagation settings explained above. The whole system is designed so that it can be easily updated, including all services in various fine-grained ways without having to enter every single service's mount namespace which would be prohibitively expensive. The mount propagation layout has been carefully chosen so it is possible to propagate updates for system extensions and configurations from the host into all services. The simplest model to update the whole system is to mount on top of /usr, /opt, or /etc on the host. The new mount on /usr, /opt, or /etc will then propagate into every service. This works cleanly the first time. However, when the system is updated multiple times it becomes necessary to unmount the first update on /opt, /usr, /etc and then propagate the new update. But this means, there's an interval where the old base system is accessible. This has to be avoided to protect against downgrade attacks. The vfs already exposes a mechanism to userspace whereby mounts can be mounted beneath an existing mount. Such mounts are internally referred to as "tucked". The patch series exposes the ability to mount beneath a top mount through the new MOVE_MOUNT_BENEATH flag for the move_mount() system call. This allows userspace to seamlessly upgrade mounts. After this series the only thing that will have changed is that mounting beneath an existing mount can be done explicitly instead of just implicitly. Today, there are two scenarios where a mount can be mounted beneath an existing mount instead of on top of it: (1) When a service or container is started in a new mount namespace and pivot_root()s into its new rootfs. The way this is done is by mounting the new rootfs beneath the old rootfs: fd_newroot = open("/var/lib/machines/fedora", ...); fd_oldroot = open("/", ...); fchdir(fd_newroot); pivot_root(".", "."); After the pivot_root(".", ".") call the new rootfs is mounted beneath the old rootfs which can then be unmounted to reveal the underlying mount: fchdir(fd_oldroot); umount2(".", MNT_DETACH); Since pivot_root() moves the caller into a new rootfs no mounts must be propagated out of the new rootfs as a consequence of the pivot_root() call. Thus, the mounts cannot be shared. (2) When a mount is propagated to a mount that already has another mount mounted on the same dentry. The easiest example for this is to create a new mount namespace. The following commands will create a mount namespace where the rootfs mount / will be a slave to the peer group of the host rootfs / mount's peer group. IOW, it will receive propagation from the host: mount --make-shared / unshare --mount --propagation=slave Now a new mount on the /mnt dentry in that mount namespace is created. (As it can be confusing it should be spelled out that the tmpfs mount on the /mnt dentry that was just created doesn't propagate back to the host because the rootfs mount / of the mount namespace isn't a peer of the host rootfs.): mount -t tmpfs tmpfs /mnt TARGET SOURCE FSTYPE PROPAGATION └─/mnt tmpfs tmpfs Now another terminal in the host mount namespace can observe that the mount indeed hasn't propagated back to into the host mount namespace. A new mount can now be created on top of the /mnt dentry with the rootfs mount / as its parent: mount --bind /opt /mnt TARGET SOURCE FSTYPE PROPAGATION └─/mnt /dev/sda2[/opt] ext4 shared:1 The mount namespace that was created earlier can now observe that the bind mount created on the host has propagated into it: TARGET SOURCE FSTYPE PROPAGATION └─/mnt /dev/sda2[/opt] ext4 master:1 └─/mnt tmpfs tmpfs But instead of having been mounted on top of the tmpfs mount at the /mnt dentry the /opt mount has been mounted on top of the rootfs mount at the /mnt dentry. And the tmpfs mount has been remounted on top of the propagated /opt mount at the /opt dentry. So in other words, the propagated mount has been mounted beneath the preexisting mount in that mount namespace. Mount namespaces make this easy to illustrate but it's also easy to mount beneath an existing mount in the same mount namespace (The following example assumes a shared rootfs mount / with peer group id 1): mount --bind /opt /opt TARGET SOURCE FSTYPE MNT_ID PARENT_ID PROPAGATION └─/opt /dev/sda2[/opt] ext4 188 29 shared:1 If another mount is mounted on top of the /opt mount at the /opt dentry: mount --bind /tmp /opt The following clunky mount tree will result: TARGET SOURCE FSTYPE MNT_ID PARENT_ID PROPAGATION └─/opt /dev/sda2[/tmp] ext4 405 29 shared:1 └─/opt /dev/sda2[/opt] ext4 188 405 shared:1 └─/opt /dev/sda2[/tmp] ext4 404 188 shared:1 The /tmp mount is mounted beneath the /opt mount and another copy is mounted on top of the /opt mount. This happens because the rootfs / and the /opt mount are shared mounts in the same peer group. When the new /tmp mount is supposed to be mounted at the /opt dentry then the /tmp mount first propagates to the root mount at the /opt dentry. But there already is the /opt mount mounted at the /opt dentry. So the old /opt mount at the /opt dentry will be mounted on top of the new /tmp mount at the /tmp dentry, i.e. @opt->mnt_parent is @tmp and @opt->mnt_mountpoint is /tmp (Note that @opt->mnt_root is /opt which is what shows up as /opt under SOURCE). So again, a mount will be mounted beneath a preexisting mount. (Fwiw, a few iterations of mount --bind /opt /opt in a loop on a shared rootfs is a good example of what could be referred to as mount explosion.) The main point is that such mounts allows userspace to umount a top mount and reveal an underlying mount. So for example, umounting the tmpfs mount on /mnt that was created in example (1) using mount namespaces reveals the /opt mount which was mounted beneath it. In (2) where a mount was mounted beneath the top mount in the same mount namespace unmounting the top mount would unmount both the top mount and the mount beneath. In the process the original mount would be remounted on top of the rootfs mount / at the /opt dentry again. This again, is a result of mount propagation only this time it's umount propagation. However, this can be avoided by simply making the parent mount / of the @opt mount a private or slave mount. Then the top mount and the original mount can be unmounted to reveal the mount beneath. These two examples are fairly arcane and are merely added to make it clear how mount propagation has effects on current and future features. More common use-cases will just be things like: mount -t btrfs /dev/sdA /mnt mount -t xfs /dev/sdB --beneath /mnt umount /mnt after which we'll have updated from a btrfs filesystem to a xfs filesystem without ever revealing the underlying mountpoint. The crux is that the proposed mechanism already exists and that it is so powerful as to cover cases where mounts are supposed to be updated with new versions. Crucially, it offers an important flexibility. Namely that updates to a system may either be forced or can be delayed and the umount of the top mount be left to a service if it is a cooperative one. This adds a new flag to move_mount() that allows to explicitly move a beneath the top mount adhering to the following semantics: * Mounts cannot be mounted beneath the rootfs. This restriction encompasses the rootfs but also chroots via chroot() and pivot_root(). To mount a mount beneath the rootfs or a chroot, pivot_root() can be used as illustrated above. * The source mount must be a private mount to force the kernel to allocate a new, unused peer group id. This isn't a required restriction but a voluntary one. It avoids repeating a semantical quirk that already exists today. If bind mounts which already have a peer group id are inserted into mount trees that have the same peer group id this can cause a lot of mount propagation events to be generated (For example, consider running mount --bind /opt /opt in a loop where the parent mount is a shared mount.). * Avoid getting rid of the top mount in the kernel. Cooperative services need to be able to unmount the top mount themselves. This also avoids a good deal of additional complexity. The umount would have to be propagated which would be another rather expensive operation. So namespace_lock() and lock_mount_hash() would potentially have to be held for a long time for both a mount and umount propagation. That should be avoided. * The path to mount beneath must be mounted and attached. * The top mount and its parent must be in the caller's mount namespace and the caller must be able to mount in that mount namespace. * The caller must be able to unmount the top mount to prove that they could reveal the underlying mount. * The propagation tree is calculated based on the destination mount's parent mount and the destination mount's mountpoint on the parent mount. Of course, if the parent of the destination mount and the destination mount are shared mounts in the same peer group and the mountpoint of the new mount to be mounted is a subdir of their ->mnt_root then both will receive a mount of /opt. That's probably easier to understand with an example. Assuming a standard shared rootfs /: mount --bind /opt /opt mount --bind /tmp /opt will cause the same mount tree as: mount --bind /opt /opt mount --beneath /tmp /opt because both / and /opt are shared mounts/peers in the same peer group and the /opt dentry is a subdirectory of both the parent's and the child's ->mnt_root. If a mount tree like that is created it almost always is an accident or abuse of mount propagation. Realistically what most people probably mean in this scenarios is: mount --bind /opt /opt mount --make-private /opt mount --make-shared /opt This forces the allocation of a new separate peer group for the /opt mount. Aferwards a mount --bind or mount --beneath actually makes sense as the / and /opt mount belong to different peer groups. Before that it's likely just confusion about what the user wanted to achieve. * Refuse MOVE_MOUNT_BENEATH if: (1) the @mnt_from has been overmounted in between path resolution and acquiring @namespace_sem when locking @mnt_to. This avoids the proliferation of shadow mounts. (2) if @to_mnt is moved to a different mountpoint while acquiring @namespace_sem to lock @to_mnt. (3) if @to_mnt is unmounted while acquiring @namespace_sem to lock @to_mnt. (4) if the parent of the target mount propagates to the target mount at the same mountpoint. This would mean mounting @mnt_from on @mnt_to->mnt_parent and then propagating a copy @c of @mnt_from onto @mnt_to. This defeats the whole purpose of mounting @mnt_from beneath @mnt_to. (5) if the parent mount @mnt_to->mnt_parent propagates to @mnt_from at the same mountpoint. If @mnt_to->mnt_parent propagates to @mnt_from this would mean propagating a copy @c of @mnt_from on top of @mnt_from. Afterwards @mnt_from would be mounted on top of @mnt_to->mnt_parent and @mnt_to would be unmounted from @mnt->mnt_parent and remounted on @mnt_from. But since @c is already mounted on @mnt_from, @mnt_to would ultimately be remounted on top of @c. Afterwards, @mnt_from would be covered by a copy @c of @mnt_from and @c would be covered by @mnt_from itself. This defeats the whole purpose of mounting @mnt_from beneath @mnt_to. Cases (1) to (3) are required as they deal with races that would cause bugs or unexpected behavior for users. Cases (4) and (5) refuse semantical quirks that would not be a bug but would cause weird mount trees to be created. While they can already be created via other means (mount --bind /opt /opt x n) there's no reason to repeat past mistakes in new features. Link: https://man7.org/linux/man-pages/man8/systemd-sysext.8.html [1] Link: https://brauner.io/2023/02/28/mounting-into-mount-namespaces.html [2] Link: https://github.com/flatcar/sysext-bakery Link: https://fedoraproject.org/wiki/Changes/Unified_Kernel_Support_Phase_1 Link: https://fedoraproject.org/wiki/Changes/Unified_Kernel_Support_Phase_2 Link: https://github.com/systemd/systemd/pull/26013 Reviewed-by: Seth Forshee (DigitalOcean) <sforshee@kernel.org> Message-Id: <20230202-fs-move-mount-replace-v4-4-98f3d80d7eaa@kernel.org> Signed-off-by: Christian Brauner <brauner@kernel.org>
2023-05-03 11:18:42 +00:00
if (beneath && (!is_mounted(mnt) || m->mnt_mountpoint != dentry)) {
namespace_unlock();
inode_unlock(dentry->d_inode);
fs: allow to mount beneath top mount Various distributions are adding or are in the process of adding support for system extensions and in the future configuration extensions through various tools. A more detailed explanation on system and configuration extensions can be found on the manpage which is listed below at [1]. System extension images may – dynamically at runtime — extend the /usr/ and /opt/ directory hierarchies with additional files. This is particularly useful on immutable system images where a /usr/ and/or /opt/ hierarchy residing on a read-only file system shall be extended temporarily at runtime without making any persistent modifications. When one or more system extension images are activated, their /usr/ and /opt/ hierarchies are combined via overlayfs with the same hierarchies of the host OS, and the host /usr/ and /opt/ overmounted with it ("merging"). When they are deactivated, the mount point is disassembled — again revealing the unmodified original host version of the hierarchy ("unmerging"). Merging thus makes the extension's resources suddenly appear below the /usr/ and /opt/ hierarchies as if they were included in the base OS image itself. Unmerging makes them disappear again, leaving in place only the files that were shipped with the base OS image itself. System configuration images are similar but operate on directories containing system or service configuration. On nearly all modern distributions mount propagation plays a crucial role and the rootfs of the OS is a shared mount in a peer group (usually with peer group id 1): TARGET SOURCE FSTYPE PROPAGATION MNT_ID PARENT_ID / / ext4 shared:1 29 1 On such systems all services and containers run in a separate mount namespace and are pivot_root()ed into their rootfs. A separate mount namespace is almost always used as it is the minimal isolation mechanism services have. But usually they are even much more isolated up to the point where they almost become indistinguishable from containers. Mount propagation again plays a crucial role here. The rootfs of all these services is a slave mount to the peer group of the host rootfs. This is done so the service will receive mount propagation events from the host when certain files or directories are updated. In addition, the rootfs of each service, container, and sandbox is also a shared mount in its separate peer group: TARGET SOURCE FSTYPE PROPAGATION MNT_ID PARENT_ID / / ext4 shared:24 master:1 71 47 For people not too familiar with mount propagation, the master:1 means that this is a slave mount to peer group 1. Which as one can see is the host rootfs as indicated by shared:1 above. The shared:24 indicates that the service rootfs is a shared mount in a separate peer group with peer group id 24. A service may run other services. Such nested services will also have a rootfs mount that is a slave to the peer group of the outer service rootfs mount. For containers things are just slighly different. A container's rootfs isn't a slave to the service's or host rootfs' peer group. The rootfs mount of a container is simply a shared mount in its own peer group: TARGET SOURCE FSTYPE PROPAGATION MNT_ID PARENT_ID /home/ubuntu/debian-tree / ext4 shared:99 61 60 So whereas services are isolated OS components a container is treated like a separate world and mount propagation into it is restricted to a single well known mount that is a slave to the peer group of the shared mount /run on the host: TARGET SOURCE FSTYPE PROPAGATION MNT_ID PARENT_ID /propagate/debian-tree /run/host/incoming tmpfs master:5 71 68 Here, the master:5 indicates that this mount is a slave to the peer group with peer group id 5. This allows to propagate mounts into the container and served as a workaround for not being able to insert mounts into mount namespaces directly. But the new mount api does support inserting mounts directly. For the interested reader the blogpost in [2] might be worth reading where I explain the old and the new approach to inserting mounts into mount namespaces. Containers of course, can themselves be run as services. They often run full systems themselves which means they again run services and containers with the exact same propagation settings explained above. The whole system is designed so that it can be easily updated, including all services in various fine-grained ways without having to enter every single service's mount namespace which would be prohibitively expensive. The mount propagation layout has been carefully chosen so it is possible to propagate updates for system extensions and configurations from the host into all services. The simplest model to update the whole system is to mount on top of /usr, /opt, or /etc on the host. The new mount on /usr, /opt, or /etc will then propagate into every service. This works cleanly the first time. However, when the system is updated multiple times it becomes necessary to unmount the first update on /opt, /usr, /etc and then propagate the new update. But this means, there's an interval where the old base system is accessible. This has to be avoided to protect against downgrade attacks. The vfs already exposes a mechanism to userspace whereby mounts can be mounted beneath an existing mount. Such mounts are internally referred to as "tucked". The patch series exposes the ability to mount beneath a top mount through the new MOVE_MOUNT_BENEATH flag for the move_mount() system call. This allows userspace to seamlessly upgrade mounts. After this series the only thing that will have changed is that mounting beneath an existing mount can be done explicitly instead of just implicitly. Today, there are two scenarios where a mount can be mounted beneath an existing mount instead of on top of it: (1) When a service or container is started in a new mount namespace and pivot_root()s into its new rootfs. The way this is done is by mounting the new rootfs beneath the old rootfs: fd_newroot = open("/var/lib/machines/fedora", ...); fd_oldroot = open("/", ...); fchdir(fd_newroot); pivot_root(".", "."); After the pivot_root(".", ".") call the new rootfs is mounted beneath the old rootfs which can then be unmounted to reveal the underlying mount: fchdir(fd_oldroot); umount2(".", MNT_DETACH); Since pivot_root() moves the caller into a new rootfs no mounts must be propagated out of the new rootfs as a consequence of the pivot_root() call. Thus, the mounts cannot be shared. (2) When a mount is propagated to a mount that already has another mount mounted on the same dentry. The easiest example for this is to create a new mount namespace. The following commands will create a mount namespace where the rootfs mount / will be a slave to the peer group of the host rootfs / mount's peer group. IOW, it will receive propagation from the host: mount --make-shared / unshare --mount --propagation=slave Now a new mount on the /mnt dentry in that mount namespace is created. (As it can be confusing it should be spelled out that the tmpfs mount on the /mnt dentry that was just created doesn't propagate back to the host because the rootfs mount / of the mount namespace isn't a peer of the host rootfs.): mount -t tmpfs tmpfs /mnt TARGET SOURCE FSTYPE PROPAGATION └─/mnt tmpfs tmpfs Now another terminal in the host mount namespace can observe that the mount indeed hasn't propagated back to into the host mount namespace. A new mount can now be created on top of the /mnt dentry with the rootfs mount / as its parent: mount --bind /opt /mnt TARGET SOURCE FSTYPE PROPAGATION └─/mnt /dev/sda2[/opt] ext4 shared:1 The mount namespace that was created earlier can now observe that the bind mount created on the host has propagated into it: TARGET SOURCE FSTYPE PROPAGATION └─/mnt /dev/sda2[/opt] ext4 master:1 └─/mnt tmpfs tmpfs But instead of having been mounted on top of the tmpfs mount at the /mnt dentry the /opt mount has been mounted on top of the rootfs mount at the /mnt dentry. And the tmpfs mount has been remounted on top of the propagated /opt mount at the /opt dentry. So in other words, the propagated mount has been mounted beneath the preexisting mount in that mount namespace. Mount namespaces make this easy to illustrate but it's also easy to mount beneath an existing mount in the same mount namespace (The following example assumes a shared rootfs mount / with peer group id 1): mount --bind /opt /opt TARGET SOURCE FSTYPE MNT_ID PARENT_ID PROPAGATION └─/opt /dev/sda2[/opt] ext4 188 29 shared:1 If another mount is mounted on top of the /opt mount at the /opt dentry: mount --bind /tmp /opt The following clunky mount tree will result: TARGET SOURCE FSTYPE MNT_ID PARENT_ID PROPAGATION └─/opt /dev/sda2[/tmp] ext4 405 29 shared:1 └─/opt /dev/sda2[/opt] ext4 188 405 shared:1 └─/opt /dev/sda2[/tmp] ext4 404 188 shared:1 The /tmp mount is mounted beneath the /opt mount and another copy is mounted on top of the /opt mount. This happens because the rootfs / and the /opt mount are shared mounts in the same peer group. When the new /tmp mount is supposed to be mounted at the /opt dentry then the /tmp mount first propagates to the root mount at the /opt dentry. But there already is the /opt mount mounted at the /opt dentry. So the old /opt mount at the /opt dentry will be mounted on top of the new /tmp mount at the /tmp dentry, i.e. @opt->mnt_parent is @tmp and @opt->mnt_mountpoint is /tmp (Note that @opt->mnt_root is /opt which is what shows up as /opt under SOURCE). So again, a mount will be mounted beneath a preexisting mount. (Fwiw, a few iterations of mount --bind /opt /opt in a loop on a shared rootfs is a good example of what could be referred to as mount explosion.) The main point is that such mounts allows userspace to umount a top mount and reveal an underlying mount. So for example, umounting the tmpfs mount on /mnt that was created in example (1) using mount namespaces reveals the /opt mount which was mounted beneath it. In (2) where a mount was mounted beneath the top mount in the same mount namespace unmounting the top mount would unmount both the top mount and the mount beneath. In the process the original mount would be remounted on top of the rootfs mount / at the /opt dentry again. This again, is a result of mount propagation only this time it's umount propagation. However, this can be avoided by simply making the parent mount / of the @opt mount a private or slave mount. Then the top mount and the original mount can be unmounted to reveal the mount beneath. These two examples are fairly arcane and are merely added to make it clear how mount propagation has effects on current and future features. More common use-cases will just be things like: mount -t btrfs /dev/sdA /mnt mount -t xfs /dev/sdB --beneath /mnt umount /mnt after which we'll have updated from a btrfs filesystem to a xfs filesystem without ever revealing the underlying mountpoint. The crux is that the proposed mechanism already exists and that it is so powerful as to cover cases where mounts are supposed to be updated with new versions. Crucially, it offers an important flexibility. Namely that updates to a system may either be forced or can be delayed and the umount of the top mount be left to a service if it is a cooperative one. This adds a new flag to move_mount() that allows to explicitly move a beneath the top mount adhering to the following semantics: * Mounts cannot be mounted beneath the rootfs. This restriction encompasses the rootfs but also chroots via chroot() and pivot_root(). To mount a mount beneath the rootfs or a chroot, pivot_root() can be used as illustrated above. * The source mount must be a private mount to force the kernel to allocate a new, unused peer group id. This isn't a required restriction but a voluntary one. It avoids repeating a semantical quirk that already exists today. If bind mounts which already have a peer group id are inserted into mount trees that have the same peer group id this can cause a lot of mount propagation events to be generated (For example, consider running mount --bind /opt /opt in a loop where the parent mount is a shared mount.). * Avoid getting rid of the top mount in the kernel. Cooperative services need to be able to unmount the top mount themselves. This also avoids a good deal of additional complexity. The umount would have to be propagated which would be another rather expensive operation. So namespace_lock() and lock_mount_hash() would potentially have to be held for a long time for both a mount and umount propagation. That should be avoided. * The path to mount beneath must be mounted and attached. * The top mount and its parent must be in the caller's mount namespace and the caller must be able to mount in that mount namespace. * The caller must be able to unmount the top mount to prove that they could reveal the underlying mount. * The propagation tree is calculated based on the destination mount's parent mount and the destination mount's mountpoint on the parent mount. Of course, if the parent of the destination mount and the destination mount are shared mounts in the same peer group and the mountpoint of the new mount to be mounted is a subdir of their ->mnt_root then both will receive a mount of /opt. That's probably easier to understand with an example. Assuming a standard shared rootfs /: mount --bind /opt /opt mount --bind /tmp /opt will cause the same mount tree as: mount --bind /opt /opt mount --beneath /tmp /opt because both / and /opt are shared mounts/peers in the same peer group and the /opt dentry is a subdirectory of both the parent's and the child's ->mnt_root. If a mount tree like that is created it almost always is an accident or abuse of mount propagation. Realistically what most people probably mean in this scenarios is: mount --bind /opt /opt mount --make-private /opt mount --make-shared /opt This forces the allocation of a new separate peer group for the /opt mount. Aferwards a mount --bind or mount --beneath actually makes sense as the / and /opt mount belong to different peer groups. Before that it's likely just confusion about what the user wanted to achieve. * Refuse MOVE_MOUNT_BENEATH if: (1) the @mnt_from has been overmounted in between path resolution and acquiring @namespace_sem when locking @mnt_to. This avoids the proliferation of shadow mounts. (2) if @to_mnt is moved to a different mountpoint while acquiring @namespace_sem to lock @to_mnt. (3) if @to_mnt is unmounted while acquiring @namespace_sem to lock @to_mnt. (4) if the parent of the target mount propagates to the target mount at the same mountpoint. This would mean mounting @mnt_from on @mnt_to->mnt_parent and then propagating a copy @c of @mnt_from onto @mnt_to. This defeats the whole purpose of mounting @mnt_from beneath @mnt_to. (5) if the parent mount @mnt_to->mnt_parent propagates to @mnt_from at the same mountpoint. If @mnt_to->mnt_parent propagates to @mnt_from this would mean propagating a copy @c of @mnt_from on top of @mnt_from. Afterwards @mnt_from would be mounted on top of @mnt_to->mnt_parent and @mnt_to would be unmounted from @mnt->mnt_parent and remounted on @mnt_from. But since @c is already mounted on @mnt_from, @mnt_to would ultimately be remounted on top of @c. Afterwards, @mnt_from would be covered by a copy @c of @mnt_from and @c would be covered by @mnt_from itself. This defeats the whole purpose of mounting @mnt_from beneath @mnt_to. Cases (1) to (3) are required as they deal with races that would cause bugs or unexpected behavior for users. Cases (4) and (5) refuse semantical quirks that would not be a bug but would cause weird mount trees to be created. While they can already be created via other means (mount --bind /opt /opt x n) there's no reason to repeat past mistakes in new features. Link: https://man7.org/linux/man-pages/man8/systemd-sysext.8.html [1] Link: https://brauner.io/2023/02/28/mounting-into-mount-namespaces.html [2] Link: https://github.com/flatcar/sysext-bakery Link: https://fedoraproject.org/wiki/Changes/Unified_Kernel_Support_Phase_1 Link: https://fedoraproject.org/wiki/Changes/Unified_Kernel_Support_Phase_2 Link: https://github.com/systemd/systemd/pull/26013 Reviewed-by: Seth Forshee (DigitalOcean) <sforshee@kernel.org> Message-Id: <20230202-fs-move-mount-replace-v4-4-98f3d80d7eaa@kernel.org> Signed-off-by: Christian Brauner <brauner@kernel.org>
2023-05-03 11:18:42 +00:00
goto out;
}
fs: allow to mount beneath top mount Various distributions are adding or are in the process of adding support for system extensions and in the future configuration extensions through various tools. A more detailed explanation on system and configuration extensions can be found on the manpage which is listed below at [1]. System extension images may – dynamically at runtime — extend the /usr/ and /opt/ directory hierarchies with additional files. This is particularly useful on immutable system images where a /usr/ and/or /opt/ hierarchy residing on a read-only file system shall be extended temporarily at runtime without making any persistent modifications. When one or more system extension images are activated, their /usr/ and /opt/ hierarchies are combined via overlayfs with the same hierarchies of the host OS, and the host /usr/ and /opt/ overmounted with it ("merging"). When they are deactivated, the mount point is disassembled — again revealing the unmodified original host version of the hierarchy ("unmerging"). Merging thus makes the extension's resources suddenly appear below the /usr/ and /opt/ hierarchies as if they were included in the base OS image itself. Unmerging makes them disappear again, leaving in place only the files that were shipped with the base OS image itself. System configuration images are similar but operate on directories containing system or service configuration. On nearly all modern distributions mount propagation plays a crucial role and the rootfs of the OS is a shared mount in a peer group (usually with peer group id 1): TARGET SOURCE FSTYPE PROPAGATION MNT_ID PARENT_ID / / ext4 shared:1 29 1 On such systems all services and containers run in a separate mount namespace and are pivot_root()ed into their rootfs. A separate mount namespace is almost always used as it is the minimal isolation mechanism services have. But usually they are even much more isolated up to the point where they almost become indistinguishable from containers. Mount propagation again plays a crucial role here. The rootfs of all these services is a slave mount to the peer group of the host rootfs. This is done so the service will receive mount propagation events from the host when certain files or directories are updated. In addition, the rootfs of each service, container, and sandbox is also a shared mount in its separate peer group: TARGET SOURCE FSTYPE PROPAGATION MNT_ID PARENT_ID / / ext4 shared:24 master:1 71 47 For people not too familiar with mount propagation, the master:1 means that this is a slave mount to peer group 1. Which as one can see is the host rootfs as indicated by shared:1 above. The shared:24 indicates that the service rootfs is a shared mount in a separate peer group with peer group id 24. A service may run other services. Such nested services will also have a rootfs mount that is a slave to the peer group of the outer service rootfs mount. For containers things are just slighly different. A container's rootfs isn't a slave to the service's or host rootfs' peer group. The rootfs mount of a container is simply a shared mount in its own peer group: TARGET SOURCE FSTYPE PROPAGATION MNT_ID PARENT_ID /home/ubuntu/debian-tree / ext4 shared:99 61 60 So whereas services are isolated OS components a container is treated like a separate world and mount propagation into it is restricted to a single well known mount that is a slave to the peer group of the shared mount /run on the host: TARGET SOURCE FSTYPE PROPAGATION MNT_ID PARENT_ID /propagate/debian-tree /run/host/incoming tmpfs master:5 71 68 Here, the master:5 indicates that this mount is a slave to the peer group with peer group id 5. This allows to propagate mounts into the container and served as a workaround for not being able to insert mounts into mount namespaces directly. But the new mount api does support inserting mounts directly. For the interested reader the blogpost in [2] might be worth reading where I explain the old and the new approach to inserting mounts into mount namespaces. Containers of course, can themselves be run as services. They often run full systems themselves which means they again run services and containers with the exact same propagation settings explained above. The whole system is designed so that it can be easily updated, including all services in various fine-grained ways without having to enter every single service's mount namespace which would be prohibitively expensive. The mount propagation layout has been carefully chosen so it is possible to propagate updates for system extensions and configurations from the host into all services. The simplest model to update the whole system is to mount on top of /usr, /opt, or /etc on the host. The new mount on /usr, /opt, or /etc will then propagate into every service. This works cleanly the first time. However, when the system is updated multiple times it becomes necessary to unmount the first update on /opt, /usr, /etc and then propagate the new update. But this means, there's an interval where the old base system is accessible. This has to be avoided to protect against downgrade attacks. The vfs already exposes a mechanism to userspace whereby mounts can be mounted beneath an existing mount. Such mounts are internally referred to as "tucked". The patch series exposes the ability to mount beneath a top mount through the new MOVE_MOUNT_BENEATH flag for the move_mount() system call. This allows userspace to seamlessly upgrade mounts. After this series the only thing that will have changed is that mounting beneath an existing mount can be done explicitly instead of just implicitly. Today, there are two scenarios where a mount can be mounted beneath an existing mount instead of on top of it: (1) When a service or container is started in a new mount namespace and pivot_root()s into its new rootfs. The way this is done is by mounting the new rootfs beneath the old rootfs: fd_newroot = open("/var/lib/machines/fedora", ...); fd_oldroot = open("/", ...); fchdir(fd_newroot); pivot_root(".", "."); After the pivot_root(".", ".") call the new rootfs is mounted beneath the old rootfs which can then be unmounted to reveal the underlying mount: fchdir(fd_oldroot); umount2(".", MNT_DETACH); Since pivot_root() moves the caller into a new rootfs no mounts must be propagated out of the new rootfs as a consequence of the pivot_root() call. Thus, the mounts cannot be shared. (2) When a mount is propagated to a mount that already has another mount mounted on the same dentry. The easiest example for this is to create a new mount namespace. The following commands will create a mount namespace where the rootfs mount / will be a slave to the peer group of the host rootfs / mount's peer group. IOW, it will receive propagation from the host: mount --make-shared / unshare --mount --propagation=slave Now a new mount on the /mnt dentry in that mount namespace is created. (As it can be confusing it should be spelled out that the tmpfs mount on the /mnt dentry that was just created doesn't propagate back to the host because the rootfs mount / of the mount namespace isn't a peer of the host rootfs.): mount -t tmpfs tmpfs /mnt TARGET SOURCE FSTYPE PROPAGATION └─/mnt tmpfs tmpfs Now another terminal in the host mount namespace can observe that the mount indeed hasn't propagated back to into the host mount namespace. A new mount can now be created on top of the /mnt dentry with the rootfs mount / as its parent: mount --bind /opt /mnt TARGET SOURCE FSTYPE PROPAGATION └─/mnt /dev/sda2[/opt] ext4 shared:1 The mount namespace that was created earlier can now observe that the bind mount created on the host has propagated into it: TARGET SOURCE FSTYPE PROPAGATION └─/mnt /dev/sda2[/opt] ext4 master:1 └─/mnt tmpfs tmpfs But instead of having been mounted on top of the tmpfs mount at the /mnt dentry the /opt mount has been mounted on top of the rootfs mount at the /mnt dentry. And the tmpfs mount has been remounted on top of the propagated /opt mount at the /opt dentry. So in other words, the propagated mount has been mounted beneath the preexisting mount in that mount namespace. Mount namespaces make this easy to illustrate but it's also easy to mount beneath an existing mount in the same mount namespace (The following example assumes a shared rootfs mount / with peer group id 1): mount --bind /opt /opt TARGET SOURCE FSTYPE MNT_ID PARENT_ID PROPAGATION └─/opt /dev/sda2[/opt] ext4 188 29 shared:1 If another mount is mounted on top of the /opt mount at the /opt dentry: mount --bind /tmp /opt The following clunky mount tree will result: TARGET SOURCE FSTYPE MNT_ID PARENT_ID PROPAGATION └─/opt /dev/sda2[/tmp] ext4 405 29 shared:1 └─/opt /dev/sda2[/opt] ext4 188 405 shared:1 └─/opt /dev/sda2[/tmp] ext4 404 188 shared:1 The /tmp mount is mounted beneath the /opt mount and another copy is mounted on top of the /opt mount. This happens because the rootfs / and the /opt mount are shared mounts in the same peer group. When the new /tmp mount is supposed to be mounted at the /opt dentry then the /tmp mount first propagates to the root mount at the /opt dentry. But there already is the /opt mount mounted at the /opt dentry. So the old /opt mount at the /opt dentry will be mounted on top of the new /tmp mount at the /tmp dentry, i.e. @opt->mnt_parent is @tmp and @opt->mnt_mountpoint is /tmp (Note that @opt->mnt_root is /opt which is what shows up as /opt under SOURCE). So again, a mount will be mounted beneath a preexisting mount. (Fwiw, a few iterations of mount --bind /opt /opt in a loop on a shared rootfs is a good example of what could be referred to as mount explosion.) The main point is that such mounts allows userspace to umount a top mount and reveal an underlying mount. So for example, umounting the tmpfs mount on /mnt that was created in example (1) using mount namespaces reveals the /opt mount which was mounted beneath it. In (2) where a mount was mounted beneath the top mount in the same mount namespace unmounting the top mount would unmount both the top mount and the mount beneath. In the process the original mount would be remounted on top of the rootfs mount / at the /opt dentry again. This again, is a result of mount propagation only this time it's umount propagation. However, this can be avoided by simply making the parent mount / of the @opt mount a private or slave mount. Then the top mount and the original mount can be unmounted to reveal the mount beneath. These two examples are fairly arcane and are merely added to make it clear how mount propagation has effects on current and future features. More common use-cases will just be things like: mount -t btrfs /dev/sdA /mnt mount -t xfs /dev/sdB --beneath /mnt umount /mnt after which we'll have updated from a btrfs filesystem to a xfs filesystem without ever revealing the underlying mountpoint. The crux is that the proposed mechanism already exists and that it is so powerful as to cover cases where mounts are supposed to be updated with new versions. Crucially, it offers an important flexibility. Namely that updates to a system may either be forced or can be delayed and the umount of the top mount be left to a service if it is a cooperative one. This adds a new flag to move_mount() that allows to explicitly move a beneath the top mount adhering to the following semantics: * Mounts cannot be mounted beneath the rootfs. This restriction encompasses the rootfs but also chroots via chroot() and pivot_root(). To mount a mount beneath the rootfs or a chroot, pivot_root() can be used as illustrated above. * The source mount must be a private mount to force the kernel to allocate a new, unused peer group id. This isn't a required restriction but a voluntary one. It avoids repeating a semantical quirk that already exists today. If bind mounts which already have a peer group id are inserted into mount trees that have the same peer group id this can cause a lot of mount propagation events to be generated (For example, consider running mount --bind /opt /opt in a loop where the parent mount is a shared mount.). * Avoid getting rid of the top mount in the kernel. Cooperative services need to be able to unmount the top mount themselves. This also avoids a good deal of additional complexity. The umount would have to be propagated which would be another rather expensive operation. So namespace_lock() and lock_mount_hash() would potentially have to be held for a long time for both a mount and umount propagation. That should be avoided. * The path to mount beneath must be mounted and attached. * The top mount and its parent must be in the caller's mount namespace and the caller must be able to mount in that mount namespace. * The caller must be able to unmount the top mount to prove that they could reveal the underlying mount. * The propagation tree is calculated based on the destination mount's parent mount and the destination mount's mountpoint on the parent mount. Of course, if the parent of the destination mount and the destination mount are shared mounts in the same peer group and the mountpoint of the new mount to be mounted is a subdir of their ->mnt_root then both will receive a mount of /opt. That's probably easier to understand with an example. Assuming a standard shared rootfs /: mount --bind /opt /opt mount --bind /tmp /opt will cause the same mount tree as: mount --bind /opt /opt mount --beneath /tmp /opt because both / and /opt are shared mounts/peers in the same peer group and the /opt dentry is a subdirectory of both the parent's and the child's ->mnt_root. If a mount tree like that is created it almost always is an accident or abuse of mount propagation. Realistically what most people probably mean in this scenarios is: mount --bind /opt /opt mount --make-private /opt mount --make-shared /opt This forces the allocation of a new separate peer group for the /opt mount. Aferwards a mount --bind or mount --beneath actually makes sense as the / and /opt mount belong to different peer groups. Before that it's likely just confusion about what the user wanted to achieve. * Refuse MOVE_MOUNT_BENEATH if: (1) the @mnt_from has been overmounted in between path resolution and acquiring @namespace_sem when locking @mnt_to. This avoids the proliferation of shadow mounts. (2) if @to_mnt is moved to a different mountpoint while acquiring @namespace_sem to lock @to_mnt. (3) if @to_mnt is unmounted while acquiring @namespace_sem to lock @to_mnt. (4) if the parent of the target mount propagates to the target mount at the same mountpoint. This would mean mounting @mnt_from on @mnt_to->mnt_parent and then propagating a copy @c of @mnt_from onto @mnt_to. This defeats the whole purpose of mounting @mnt_from beneath @mnt_to. (5) if the parent mount @mnt_to->mnt_parent propagates to @mnt_from at the same mountpoint. If @mnt_to->mnt_parent propagates to @mnt_from this would mean propagating a copy @c of @mnt_from on top of @mnt_from. Afterwards @mnt_from would be mounted on top of @mnt_to->mnt_parent and @mnt_to would be unmounted from @mnt->mnt_parent and remounted on @mnt_from. But since @c is already mounted on @mnt_from, @mnt_to would ultimately be remounted on top of @c. Afterwards, @mnt_from would be covered by a copy @c of @mnt_from and @c would be covered by @mnt_from itself. This defeats the whole purpose of mounting @mnt_from beneath @mnt_to. Cases (1) to (3) are required as they deal with races that would cause bugs or unexpected behavior for users. Cases (4) and (5) refuse semantical quirks that would not be a bug but would cause weird mount trees to be created. While they can already be created via other means (mount --bind /opt /opt x n) there's no reason to repeat past mistakes in new features. Link: https://man7.org/linux/man-pages/man8/systemd-sysext.8.html [1] Link: https://brauner.io/2023/02/28/mounting-into-mount-namespaces.html [2] Link: https://github.com/flatcar/sysext-bakery Link: https://fedoraproject.org/wiki/Changes/Unified_Kernel_Support_Phase_1 Link: https://fedoraproject.org/wiki/Changes/Unified_Kernel_Support_Phase_2 Link: https://github.com/systemd/systemd/pull/26013 Reviewed-by: Seth Forshee (DigitalOcean) <sforshee@kernel.org> Message-Id: <20230202-fs-move-mount-replace-v4-4-98f3d80d7eaa@kernel.org> Signed-off-by: Christian Brauner <brauner@kernel.org>
2023-05-03 11:18:42 +00:00
mnt = lookup_mnt(path);
if (likely(!mnt))
break;
namespace_unlock();
inode_unlock(dentry->d_inode);
fs: allow to mount beneath top mount Various distributions are adding or are in the process of adding support for system extensions and in the future configuration extensions through various tools. A more detailed explanation on system and configuration extensions can be found on the manpage which is listed below at [1]. System extension images may – dynamically at runtime — extend the /usr/ and /opt/ directory hierarchies with additional files. This is particularly useful on immutable system images where a /usr/ and/or /opt/ hierarchy residing on a read-only file system shall be extended temporarily at runtime without making any persistent modifications. When one or more system extension images are activated, their /usr/ and /opt/ hierarchies are combined via overlayfs with the same hierarchies of the host OS, and the host /usr/ and /opt/ overmounted with it ("merging"). When they are deactivated, the mount point is disassembled — again revealing the unmodified original host version of the hierarchy ("unmerging"). Merging thus makes the extension's resources suddenly appear below the /usr/ and /opt/ hierarchies as if they were included in the base OS image itself. Unmerging makes them disappear again, leaving in place only the files that were shipped with the base OS image itself. System configuration images are similar but operate on directories containing system or service configuration. On nearly all modern distributions mount propagation plays a crucial role and the rootfs of the OS is a shared mount in a peer group (usually with peer group id 1): TARGET SOURCE FSTYPE PROPAGATION MNT_ID PARENT_ID / / ext4 shared:1 29 1 On such systems all services and containers run in a separate mount namespace and are pivot_root()ed into their rootfs. A separate mount namespace is almost always used as it is the minimal isolation mechanism services have. But usually they are even much more isolated up to the point where they almost become indistinguishable from containers. Mount propagation again plays a crucial role here. The rootfs of all these services is a slave mount to the peer group of the host rootfs. This is done so the service will receive mount propagation events from the host when certain files or directories are updated. In addition, the rootfs of each service, container, and sandbox is also a shared mount in its separate peer group: TARGET SOURCE FSTYPE PROPAGATION MNT_ID PARENT_ID / / ext4 shared:24 master:1 71 47 For people not too familiar with mount propagation, the master:1 means that this is a slave mount to peer group 1. Which as one can see is the host rootfs as indicated by shared:1 above. The shared:24 indicates that the service rootfs is a shared mount in a separate peer group with peer group id 24. A service may run other services. Such nested services will also have a rootfs mount that is a slave to the peer group of the outer service rootfs mount. For containers things are just slighly different. A container's rootfs isn't a slave to the service's or host rootfs' peer group. The rootfs mount of a container is simply a shared mount in its own peer group: TARGET SOURCE FSTYPE PROPAGATION MNT_ID PARENT_ID /home/ubuntu/debian-tree / ext4 shared:99 61 60 So whereas services are isolated OS components a container is treated like a separate world and mount propagation into it is restricted to a single well known mount that is a slave to the peer group of the shared mount /run on the host: TARGET SOURCE FSTYPE PROPAGATION MNT_ID PARENT_ID /propagate/debian-tree /run/host/incoming tmpfs master:5 71 68 Here, the master:5 indicates that this mount is a slave to the peer group with peer group id 5. This allows to propagate mounts into the container and served as a workaround for not being able to insert mounts into mount namespaces directly. But the new mount api does support inserting mounts directly. For the interested reader the blogpost in [2] might be worth reading where I explain the old and the new approach to inserting mounts into mount namespaces. Containers of course, can themselves be run as services. They often run full systems themselves which means they again run services and containers with the exact same propagation settings explained above. The whole system is designed so that it can be easily updated, including all services in various fine-grained ways without having to enter every single service's mount namespace which would be prohibitively expensive. The mount propagation layout has been carefully chosen so it is possible to propagate updates for system extensions and configurations from the host into all services. The simplest model to update the whole system is to mount on top of /usr, /opt, or /etc on the host. The new mount on /usr, /opt, or /etc will then propagate into every service. This works cleanly the first time. However, when the system is updated multiple times it becomes necessary to unmount the first update on /opt, /usr, /etc and then propagate the new update. But this means, there's an interval where the old base system is accessible. This has to be avoided to protect against downgrade attacks. The vfs already exposes a mechanism to userspace whereby mounts can be mounted beneath an existing mount. Such mounts are internally referred to as "tucked". The patch series exposes the ability to mount beneath a top mount through the new MOVE_MOUNT_BENEATH flag for the move_mount() system call. This allows userspace to seamlessly upgrade mounts. After this series the only thing that will have changed is that mounting beneath an existing mount can be done explicitly instead of just implicitly. Today, there are two scenarios where a mount can be mounted beneath an existing mount instead of on top of it: (1) When a service or container is started in a new mount namespace and pivot_root()s into its new rootfs. The way this is done is by mounting the new rootfs beneath the old rootfs: fd_newroot = open("/var/lib/machines/fedora", ...); fd_oldroot = open("/", ...); fchdir(fd_newroot); pivot_root(".", "."); After the pivot_root(".", ".") call the new rootfs is mounted beneath the old rootfs which can then be unmounted to reveal the underlying mount: fchdir(fd_oldroot); umount2(".", MNT_DETACH); Since pivot_root() moves the caller into a new rootfs no mounts must be propagated out of the new rootfs as a consequence of the pivot_root() call. Thus, the mounts cannot be shared. (2) When a mount is propagated to a mount that already has another mount mounted on the same dentry. The easiest example for this is to create a new mount namespace. The following commands will create a mount namespace where the rootfs mount / will be a slave to the peer group of the host rootfs / mount's peer group. IOW, it will receive propagation from the host: mount --make-shared / unshare --mount --propagation=slave Now a new mount on the /mnt dentry in that mount namespace is created. (As it can be confusing it should be spelled out that the tmpfs mount on the /mnt dentry that was just created doesn't propagate back to the host because the rootfs mount / of the mount namespace isn't a peer of the host rootfs.): mount -t tmpfs tmpfs /mnt TARGET SOURCE FSTYPE PROPAGATION └─/mnt tmpfs tmpfs Now another terminal in the host mount namespace can observe that the mount indeed hasn't propagated back to into the host mount namespace. A new mount can now be created on top of the /mnt dentry with the rootfs mount / as its parent: mount --bind /opt /mnt TARGET SOURCE FSTYPE PROPAGATION └─/mnt /dev/sda2[/opt] ext4 shared:1 The mount namespace that was created earlier can now observe that the bind mount created on the host has propagated into it: TARGET SOURCE FSTYPE PROPAGATION └─/mnt /dev/sda2[/opt] ext4 master:1 └─/mnt tmpfs tmpfs But instead of having been mounted on top of the tmpfs mount at the /mnt dentry the /opt mount has been mounted on top of the rootfs mount at the /mnt dentry. And the tmpfs mount has been remounted on top of the propagated /opt mount at the /opt dentry. So in other words, the propagated mount has been mounted beneath the preexisting mount in that mount namespace. Mount namespaces make this easy to illustrate but it's also easy to mount beneath an existing mount in the same mount namespace (The following example assumes a shared rootfs mount / with peer group id 1): mount --bind /opt /opt TARGET SOURCE FSTYPE MNT_ID PARENT_ID PROPAGATION └─/opt /dev/sda2[/opt] ext4 188 29 shared:1 If another mount is mounted on top of the /opt mount at the /opt dentry: mount --bind /tmp /opt The following clunky mount tree will result: TARGET SOURCE FSTYPE MNT_ID PARENT_ID PROPAGATION └─/opt /dev/sda2[/tmp] ext4 405 29 shared:1 └─/opt /dev/sda2[/opt] ext4 188 405 shared:1 └─/opt /dev/sda2[/tmp] ext4 404 188 shared:1 The /tmp mount is mounted beneath the /opt mount and another copy is mounted on top of the /opt mount. This happens because the rootfs / and the /opt mount are shared mounts in the same peer group. When the new /tmp mount is supposed to be mounted at the /opt dentry then the /tmp mount first propagates to the root mount at the /opt dentry. But there already is the /opt mount mounted at the /opt dentry. So the old /opt mount at the /opt dentry will be mounted on top of the new /tmp mount at the /tmp dentry, i.e. @opt->mnt_parent is @tmp and @opt->mnt_mountpoint is /tmp (Note that @opt->mnt_root is /opt which is what shows up as /opt under SOURCE). So again, a mount will be mounted beneath a preexisting mount. (Fwiw, a few iterations of mount --bind /opt /opt in a loop on a shared rootfs is a good example of what could be referred to as mount explosion.) The main point is that such mounts allows userspace to umount a top mount and reveal an underlying mount. So for example, umounting the tmpfs mount on /mnt that was created in example (1) using mount namespaces reveals the /opt mount which was mounted beneath it. In (2) where a mount was mounted beneath the top mount in the same mount namespace unmounting the top mount would unmount both the top mount and the mount beneath. In the process the original mount would be remounted on top of the rootfs mount / at the /opt dentry again. This again, is a result of mount propagation only this time it's umount propagation. However, this can be avoided by simply making the parent mount / of the @opt mount a private or slave mount. Then the top mount and the original mount can be unmounted to reveal the mount beneath. These two examples are fairly arcane and are merely added to make it clear how mount propagation has effects on current and future features. More common use-cases will just be things like: mount -t btrfs /dev/sdA /mnt mount -t xfs /dev/sdB --beneath /mnt umount /mnt after which we'll have updated from a btrfs filesystem to a xfs filesystem without ever revealing the underlying mountpoint. The crux is that the proposed mechanism already exists and that it is so powerful as to cover cases where mounts are supposed to be updated with new versions. Crucially, it offers an important flexibility. Namely that updates to a system may either be forced or can be delayed and the umount of the top mount be left to a service if it is a cooperative one. This adds a new flag to move_mount() that allows to explicitly move a beneath the top mount adhering to the following semantics: * Mounts cannot be mounted beneath the rootfs. This restriction encompasses the rootfs but also chroots via chroot() and pivot_root(). To mount a mount beneath the rootfs or a chroot, pivot_root() can be used as illustrated above. * The source mount must be a private mount to force the kernel to allocate a new, unused peer group id. This isn't a required restriction but a voluntary one. It avoids repeating a semantical quirk that already exists today. If bind mounts which already have a peer group id are inserted into mount trees that have the same peer group id this can cause a lot of mount propagation events to be generated (For example, consider running mount --bind /opt /opt in a loop where the parent mount is a shared mount.). * Avoid getting rid of the top mount in the kernel. Cooperative services need to be able to unmount the top mount themselves. This also avoids a good deal of additional complexity. The umount would have to be propagated which would be another rather expensive operation. So namespace_lock() and lock_mount_hash() would potentially have to be held for a long time for both a mount and umount propagation. That should be avoided. * The path to mount beneath must be mounted and attached. * The top mount and its parent must be in the caller's mount namespace and the caller must be able to mount in that mount namespace. * The caller must be able to unmount the top mount to prove that they could reveal the underlying mount. * The propagation tree is calculated based on the destination mount's parent mount and the destination mount's mountpoint on the parent mount. Of course, if the parent of the destination mount and the destination mount are shared mounts in the same peer group and the mountpoint of the new mount to be mounted is a subdir of their ->mnt_root then both will receive a mount of /opt. That's probably easier to understand with an example. Assuming a standard shared rootfs /: mount --bind /opt /opt mount --bind /tmp /opt will cause the same mount tree as: mount --bind /opt /opt mount --beneath /tmp /opt because both / and /opt are shared mounts/peers in the same peer group and the /opt dentry is a subdirectory of both the parent's and the child's ->mnt_root. If a mount tree like that is created it almost always is an accident or abuse of mount propagation. Realistically what most people probably mean in this scenarios is: mount --bind /opt /opt mount --make-private /opt mount --make-shared /opt This forces the allocation of a new separate peer group for the /opt mount. Aferwards a mount --bind or mount --beneath actually makes sense as the / and /opt mount belong to different peer groups. Before that it's likely just confusion about what the user wanted to achieve. * Refuse MOVE_MOUNT_BENEATH if: (1) the @mnt_from has been overmounted in between path resolution and acquiring @namespace_sem when locking @mnt_to. This avoids the proliferation of shadow mounts. (2) if @to_mnt is moved to a different mountpoint while acquiring @namespace_sem to lock @to_mnt. (3) if @to_mnt is unmounted while acquiring @namespace_sem to lock @to_mnt. (4) if the parent of the target mount propagates to the target mount at the same mountpoint. This would mean mounting @mnt_from on @mnt_to->mnt_parent and then propagating a copy @c of @mnt_from onto @mnt_to. This defeats the whole purpose of mounting @mnt_from beneath @mnt_to. (5) if the parent mount @mnt_to->mnt_parent propagates to @mnt_from at the same mountpoint. If @mnt_to->mnt_parent propagates to @mnt_from this would mean propagating a copy @c of @mnt_from on top of @mnt_from. Afterwards @mnt_from would be mounted on top of @mnt_to->mnt_parent and @mnt_to would be unmounted from @mnt->mnt_parent and remounted on @mnt_from. But since @c is already mounted on @mnt_from, @mnt_to would ultimately be remounted on top of @c. Afterwards, @mnt_from would be covered by a copy @c of @mnt_from and @c would be covered by @mnt_from itself. This defeats the whole purpose of mounting @mnt_from beneath @mnt_to. Cases (1) to (3) are required as they deal with races that would cause bugs or unexpected behavior for users. Cases (4) and (5) refuse semantical quirks that would not be a bug but would cause weird mount trees to be created. While they can already be created via other means (mount --bind /opt /opt x n) there's no reason to repeat past mistakes in new features. Link: https://man7.org/linux/man-pages/man8/systemd-sysext.8.html [1] Link: https://brauner.io/2023/02/28/mounting-into-mount-namespaces.html [2] Link: https://github.com/flatcar/sysext-bakery Link: https://fedoraproject.org/wiki/Changes/Unified_Kernel_Support_Phase_1 Link: https://fedoraproject.org/wiki/Changes/Unified_Kernel_Support_Phase_2 Link: https://github.com/systemd/systemd/pull/26013 Reviewed-by: Seth Forshee (DigitalOcean) <sforshee@kernel.org> Message-Id: <20230202-fs-move-mount-replace-v4-4-98f3d80d7eaa@kernel.org> Signed-off-by: Christian Brauner <brauner@kernel.org>
2023-05-03 11:18:42 +00:00
if (beneath)
dput(dentry);
path_put(path);
path->mnt = mnt;
path->dentry = dget(mnt->mnt_root);
}
mp = get_mountpoint(dentry);
if (IS_ERR(mp)) {
namespace_unlock();
inode_unlock(dentry->d_inode);
}
fs: allow to mount beneath top mount Various distributions are adding or are in the process of adding support for system extensions and in the future configuration extensions through various tools. A more detailed explanation on system and configuration extensions can be found on the manpage which is listed below at [1]. System extension images may – dynamically at runtime — extend the /usr/ and /opt/ directory hierarchies with additional files. This is particularly useful on immutable system images where a /usr/ and/or /opt/ hierarchy residing on a read-only file system shall be extended temporarily at runtime without making any persistent modifications. When one or more system extension images are activated, their /usr/ and /opt/ hierarchies are combined via overlayfs with the same hierarchies of the host OS, and the host /usr/ and /opt/ overmounted with it ("merging"). When they are deactivated, the mount point is disassembled — again revealing the unmodified original host version of the hierarchy ("unmerging"). Merging thus makes the extension's resources suddenly appear below the /usr/ and /opt/ hierarchies as if they were included in the base OS image itself. Unmerging makes them disappear again, leaving in place only the files that were shipped with the base OS image itself. System configuration images are similar but operate on directories containing system or service configuration. On nearly all modern distributions mount propagation plays a crucial role and the rootfs of the OS is a shared mount in a peer group (usually with peer group id 1): TARGET SOURCE FSTYPE PROPAGATION MNT_ID PARENT_ID / / ext4 shared:1 29 1 On such systems all services and containers run in a separate mount namespace and are pivot_root()ed into their rootfs. A separate mount namespace is almost always used as it is the minimal isolation mechanism services have. But usually they are even much more isolated up to the point where they almost become indistinguishable from containers. Mount propagation again plays a crucial role here. The rootfs of all these services is a slave mount to the peer group of the host rootfs. This is done so the service will receive mount propagation events from the host when certain files or directories are updated. In addition, the rootfs of each service, container, and sandbox is also a shared mount in its separate peer group: TARGET SOURCE FSTYPE PROPAGATION MNT_ID PARENT_ID / / ext4 shared:24 master:1 71 47 For people not too familiar with mount propagation, the master:1 means that this is a slave mount to peer group 1. Which as one can see is the host rootfs as indicated by shared:1 above. The shared:24 indicates that the service rootfs is a shared mount in a separate peer group with peer group id 24. A service may run other services. Such nested services will also have a rootfs mount that is a slave to the peer group of the outer service rootfs mount. For containers things are just slighly different. A container's rootfs isn't a slave to the service's or host rootfs' peer group. The rootfs mount of a container is simply a shared mount in its own peer group: TARGET SOURCE FSTYPE PROPAGATION MNT_ID PARENT_ID /home/ubuntu/debian-tree / ext4 shared:99 61 60 So whereas services are isolated OS components a container is treated like a separate world and mount propagation into it is restricted to a single well known mount that is a slave to the peer group of the shared mount /run on the host: TARGET SOURCE FSTYPE PROPAGATION MNT_ID PARENT_ID /propagate/debian-tree /run/host/incoming tmpfs master:5 71 68 Here, the master:5 indicates that this mount is a slave to the peer group with peer group id 5. This allows to propagate mounts into the container and served as a workaround for not being able to insert mounts into mount namespaces directly. But the new mount api does support inserting mounts directly. For the interested reader the blogpost in [2] might be worth reading where I explain the old and the new approach to inserting mounts into mount namespaces. Containers of course, can themselves be run as services. They often run full systems themselves which means they again run services and containers with the exact same propagation settings explained above. The whole system is designed so that it can be easily updated, including all services in various fine-grained ways without having to enter every single service's mount namespace which would be prohibitively expensive. The mount propagation layout has been carefully chosen so it is possible to propagate updates for system extensions and configurations from the host into all services. The simplest model to update the whole system is to mount on top of /usr, /opt, or /etc on the host. The new mount on /usr, /opt, or /etc will then propagate into every service. This works cleanly the first time. However, when the system is updated multiple times it becomes necessary to unmount the first update on /opt, /usr, /etc and then propagate the new update. But this means, there's an interval where the old base system is accessible. This has to be avoided to protect against downgrade attacks. The vfs already exposes a mechanism to userspace whereby mounts can be mounted beneath an existing mount. Such mounts are internally referred to as "tucked". The patch series exposes the ability to mount beneath a top mount through the new MOVE_MOUNT_BENEATH flag for the move_mount() system call. This allows userspace to seamlessly upgrade mounts. After this series the only thing that will have changed is that mounting beneath an existing mount can be done explicitly instead of just implicitly. Today, there are two scenarios where a mount can be mounted beneath an existing mount instead of on top of it: (1) When a service or container is started in a new mount namespace and pivot_root()s into its new rootfs. The way this is done is by mounting the new rootfs beneath the old rootfs: fd_newroot = open("/var/lib/machines/fedora", ...); fd_oldroot = open("/", ...); fchdir(fd_newroot); pivot_root(".", "."); After the pivot_root(".", ".") call the new rootfs is mounted beneath the old rootfs which can then be unmounted to reveal the underlying mount: fchdir(fd_oldroot); umount2(".", MNT_DETACH); Since pivot_root() moves the caller into a new rootfs no mounts must be propagated out of the new rootfs as a consequence of the pivot_root() call. Thus, the mounts cannot be shared. (2) When a mount is propagated to a mount that already has another mount mounted on the same dentry. The easiest example for this is to create a new mount namespace. The following commands will create a mount namespace where the rootfs mount / will be a slave to the peer group of the host rootfs / mount's peer group. IOW, it will receive propagation from the host: mount --make-shared / unshare --mount --propagation=slave Now a new mount on the /mnt dentry in that mount namespace is created. (As it can be confusing it should be spelled out that the tmpfs mount on the /mnt dentry that was just created doesn't propagate back to the host because the rootfs mount / of the mount namespace isn't a peer of the host rootfs.): mount -t tmpfs tmpfs /mnt TARGET SOURCE FSTYPE PROPAGATION └─/mnt tmpfs tmpfs Now another terminal in the host mount namespace can observe that the mount indeed hasn't propagated back to into the host mount namespace. A new mount can now be created on top of the /mnt dentry with the rootfs mount / as its parent: mount --bind /opt /mnt TARGET SOURCE FSTYPE PROPAGATION └─/mnt /dev/sda2[/opt] ext4 shared:1 The mount namespace that was created earlier can now observe that the bind mount created on the host has propagated into it: TARGET SOURCE FSTYPE PROPAGATION └─/mnt /dev/sda2[/opt] ext4 master:1 └─/mnt tmpfs tmpfs But instead of having been mounted on top of the tmpfs mount at the /mnt dentry the /opt mount has been mounted on top of the rootfs mount at the /mnt dentry. And the tmpfs mount has been remounted on top of the propagated /opt mount at the /opt dentry. So in other words, the propagated mount has been mounted beneath the preexisting mount in that mount namespace. Mount namespaces make this easy to illustrate but it's also easy to mount beneath an existing mount in the same mount namespace (The following example assumes a shared rootfs mount / with peer group id 1): mount --bind /opt /opt TARGET SOURCE FSTYPE MNT_ID PARENT_ID PROPAGATION └─/opt /dev/sda2[/opt] ext4 188 29 shared:1 If another mount is mounted on top of the /opt mount at the /opt dentry: mount --bind /tmp /opt The following clunky mount tree will result: TARGET SOURCE FSTYPE MNT_ID PARENT_ID PROPAGATION └─/opt /dev/sda2[/tmp] ext4 405 29 shared:1 └─/opt /dev/sda2[/opt] ext4 188 405 shared:1 └─/opt /dev/sda2[/tmp] ext4 404 188 shared:1 The /tmp mount is mounted beneath the /opt mount and another copy is mounted on top of the /opt mount. This happens because the rootfs / and the /opt mount are shared mounts in the same peer group. When the new /tmp mount is supposed to be mounted at the /opt dentry then the /tmp mount first propagates to the root mount at the /opt dentry. But there already is the /opt mount mounted at the /opt dentry. So the old /opt mount at the /opt dentry will be mounted on top of the new /tmp mount at the /tmp dentry, i.e. @opt->mnt_parent is @tmp and @opt->mnt_mountpoint is /tmp (Note that @opt->mnt_root is /opt which is what shows up as /opt under SOURCE). So again, a mount will be mounted beneath a preexisting mount. (Fwiw, a few iterations of mount --bind /opt /opt in a loop on a shared rootfs is a good example of what could be referred to as mount explosion.) The main point is that such mounts allows userspace to umount a top mount and reveal an underlying mount. So for example, umounting the tmpfs mount on /mnt that was created in example (1) using mount namespaces reveals the /opt mount which was mounted beneath it. In (2) where a mount was mounted beneath the top mount in the same mount namespace unmounting the top mount would unmount both the top mount and the mount beneath. In the process the original mount would be remounted on top of the rootfs mount / at the /opt dentry again. This again, is a result of mount propagation only this time it's umount propagation. However, this can be avoided by simply making the parent mount / of the @opt mount a private or slave mount. Then the top mount and the original mount can be unmounted to reveal the mount beneath. These two examples are fairly arcane and are merely added to make it clear how mount propagation has effects on current and future features. More common use-cases will just be things like: mount -t btrfs /dev/sdA /mnt mount -t xfs /dev/sdB --beneath /mnt umount /mnt after which we'll have updated from a btrfs filesystem to a xfs filesystem without ever revealing the underlying mountpoint. The crux is that the proposed mechanism already exists and that it is so powerful as to cover cases where mounts are supposed to be updated with new versions. Crucially, it offers an important flexibility. Namely that updates to a system may either be forced or can be delayed and the umount of the top mount be left to a service if it is a cooperative one. This adds a new flag to move_mount() that allows to explicitly move a beneath the top mount adhering to the following semantics: * Mounts cannot be mounted beneath the rootfs. This restriction encompasses the rootfs but also chroots via chroot() and pivot_root(). To mount a mount beneath the rootfs or a chroot, pivot_root() can be used as illustrated above. * The source mount must be a private mount to force the kernel to allocate a new, unused peer group id. This isn't a required restriction but a voluntary one. It avoids repeating a semantical quirk that already exists today. If bind mounts which already have a peer group id are inserted into mount trees that have the same peer group id this can cause a lot of mount propagation events to be generated (For example, consider running mount --bind /opt /opt in a loop where the parent mount is a shared mount.). * Avoid getting rid of the top mount in the kernel. Cooperative services need to be able to unmount the top mount themselves. This also avoids a good deal of additional complexity. The umount would have to be propagated which would be another rather expensive operation. So namespace_lock() and lock_mount_hash() would potentially have to be held for a long time for both a mount and umount propagation. That should be avoided. * The path to mount beneath must be mounted and attached. * The top mount and its parent must be in the caller's mount namespace and the caller must be able to mount in that mount namespace. * The caller must be able to unmount the top mount to prove that they could reveal the underlying mount. * The propagation tree is calculated based on the destination mount's parent mount and the destination mount's mountpoint on the parent mount. Of course, if the parent of the destination mount and the destination mount are shared mounts in the same peer group and the mountpoint of the new mount to be mounted is a subdir of their ->mnt_root then both will receive a mount of /opt. That's probably easier to understand with an example. Assuming a standard shared rootfs /: mount --bind /opt /opt mount --bind /tmp /opt will cause the same mount tree as: mount --bind /opt /opt mount --beneath /tmp /opt because both / and /opt are shared mounts/peers in the same peer group and the /opt dentry is a subdirectory of both the parent's and the child's ->mnt_root. If a mount tree like that is created it almost always is an accident or abuse of mount propagation. Realistically what most people probably mean in this scenarios is: mount --bind /opt /opt mount --make-private /opt mount --make-shared /opt This forces the allocation of a new separate peer group for the /opt mount. Aferwards a mount --bind or mount --beneath actually makes sense as the / and /opt mount belong to different peer groups. Before that it's likely just confusion about what the user wanted to achieve. * Refuse MOVE_MOUNT_BENEATH if: (1) the @mnt_from has been overmounted in between path resolution and acquiring @namespace_sem when locking @mnt_to. This avoids the proliferation of shadow mounts. (2) if @to_mnt is moved to a different mountpoint while acquiring @namespace_sem to lock @to_mnt. (3) if @to_mnt is unmounted while acquiring @namespace_sem to lock @to_mnt. (4) if the parent of the target mount propagates to the target mount at the same mountpoint. This would mean mounting @mnt_from on @mnt_to->mnt_parent and then propagating a copy @c of @mnt_from onto @mnt_to. This defeats the whole purpose of mounting @mnt_from beneath @mnt_to. (5) if the parent mount @mnt_to->mnt_parent propagates to @mnt_from at the same mountpoint. If @mnt_to->mnt_parent propagates to @mnt_from this would mean propagating a copy @c of @mnt_from on top of @mnt_from. Afterwards @mnt_from would be mounted on top of @mnt_to->mnt_parent and @mnt_to would be unmounted from @mnt->mnt_parent and remounted on @mnt_from. But since @c is already mounted on @mnt_from, @mnt_to would ultimately be remounted on top of @c. Afterwards, @mnt_from would be covered by a copy @c of @mnt_from and @c would be covered by @mnt_from itself. This defeats the whole purpose of mounting @mnt_from beneath @mnt_to. Cases (1) to (3) are required as they deal with races that would cause bugs or unexpected behavior for users. Cases (4) and (5) refuse semantical quirks that would not be a bug but would cause weird mount trees to be created. While they can already be created via other means (mount --bind /opt /opt x n) there's no reason to repeat past mistakes in new features. Link: https://man7.org/linux/man-pages/man8/systemd-sysext.8.html [1] Link: https://brauner.io/2023/02/28/mounting-into-mount-namespaces.html [2] Link: https://github.com/flatcar/sysext-bakery Link: https://fedoraproject.org/wiki/Changes/Unified_Kernel_Support_Phase_1 Link: https://fedoraproject.org/wiki/Changes/Unified_Kernel_Support_Phase_2 Link: https://github.com/systemd/systemd/pull/26013 Reviewed-by: Seth Forshee (DigitalOcean) <sforshee@kernel.org> Message-Id: <20230202-fs-move-mount-replace-v4-4-98f3d80d7eaa@kernel.org> Signed-off-by: Christian Brauner <brauner@kernel.org>
2023-05-03 11:18:42 +00:00
out:
if (beneath)
dput(dentry);
return mp;
}
fs: allow to mount beneath top mount Various distributions are adding or are in the process of adding support for system extensions and in the future configuration extensions through various tools. A more detailed explanation on system and configuration extensions can be found on the manpage which is listed below at [1]. System extension images may – dynamically at runtime — extend the /usr/ and /opt/ directory hierarchies with additional files. This is particularly useful on immutable system images where a /usr/ and/or /opt/ hierarchy residing on a read-only file system shall be extended temporarily at runtime without making any persistent modifications. When one or more system extension images are activated, their /usr/ and /opt/ hierarchies are combined via overlayfs with the same hierarchies of the host OS, and the host /usr/ and /opt/ overmounted with it ("merging"). When they are deactivated, the mount point is disassembled — again revealing the unmodified original host version of the hierarchy ("unmerging"). Merging thus makes the extension's resources suddenly appear below the /usr/ and /opt/ hierarchies as if they were included in the base OS image itself. Unmerging makes them disappear again, leaving in place only the files that were shipped with the base OS image itself. System configuration images are similar but operate on directories containing system or service configuration. On nearly all modern distributions mount propagation plays a crucial role and the rootfs of the OS is a shared mount in a peer group (usually with peer group id 1): TARGET SOURCE FSTYPE PROPAGATION MNT_ID PARENT_ID / / ext4 shared:1 29 1 On such systems all services and containers run in a separate mount namespace and are pivot_root()ed into their rootfs. A separate mount namespace is almost always used as it is the minimal isolation mechanism services have. But usually they are even much more isolated up to the point where they almost become indistinguishable from containers. Mount propagation again plays a crucial role here. The rootfs of all these services is a slave mount to the peer group of the host rootfs. This is done so the service will receive mount propagation events from the host when certain files or directories are updated. In addition, the rootfs of each service, container, and sandbox is also a shared mount in its separate peer group: TARGET SOURCE FSTYPE PROPAGATION MNT_ID PARENT_ID / / ext4 shared:24 master:1 71 47 For people not too familiar with mount propagation, the master:1 means that this is a slave mount to peer group 1. Which as one can see is the host rootfs as indicated by shared:1 above. The shared:24 indicates that the service rootfs is a shared mount in a separate peer group with peer group id 24. A service may run other services. Such nested services will also have a rootfs mount that is a slave to the peer group of the outer service rootfs mount. For containers things are just slighly different. A container's rootfs isn't a slave to the service's or host rootfs' peer group. The rootfs mount of a container is simply a shared mount in its own peer group: TARGET SOURCE FSTYPE PROPAGATION MNT_ID PARENT_ID /home/ubuntu/debian-tree / ext4 shared:99 61 60 So whereas services are isolated OS components a container is treated like a separate world and mount propagation into it is restricted to a single well known mount that is a slave to the peer group of the shared mount /run on the host: TARGET SOURCE FSTYPE PROPAGATION MNT_ID PARENT_ID /propagate/debian-tree /run/host/incoming tmpfs master:5 71 68 Here, the master:5 indicates that this mount is a slave to the peer group with peer group id 5. This allows to propagate mounts into the container and served as a workaround for not being able to insert mounts into mount namespaces directly. But the new mount api does support inserting mounts directly. For the interested reader the blogpost in [2] might be worth reading where I explain the old and the new approach to inserting mounts into mount namespaces. Containers of course, can themselves be run as services. They often run full systems themselves which means they again run services and containers with the exact same propagation settings explained above. The whole system is designed so that it can be easily updated, including all services in various fine-grained ways without having to enter every single service's mount namespace which would be prohibitively expensive. The mount propagation layout has been carefully chosen so it is possible to propagate updates for system extensions and configurations from the host into all services. The simplest model to update the whole system is to mount on top of /usr, /opt, or /etc on the host. The new mount on /usr, /opt, or /etc will then propagate into every service. This works cleanly the first time. However, when the system is updated multiple times it becomes necessary to unmount the first update on /opt, /usr, /etc and then propagate the new update. But this means, there's an interval where the old base system is accessible. This has to be avoided to protect against downgrade attacks. The vfs already exposes a mechanism to userspace whereby mounts can be mounted beneath an existing mount. Such mounts are internally referred to as "tucked". The patch series exposes the ability to mount beneath a top mount through the new MOVE_MOUNT_BENEATH flag for the move_mount() system call. This allows userspace to seamlessly upgrade mounts. After this series the only thing that will have changed is that mounting beneath an existing mount can be done explicitly instead of just implicitly. Today, there are two scenarios where a mount can be mounted beneath an existing mount instead of on top of it: (1) When a service or container is started in a new mount namespace and pivot_root()s into its new rootfs. The way this is done is by mounting the new rootfs beneath the old rootfs: fd_newroot = open("/var/lib/machines/fedora", ...); fd_oldroot = open("/", ...); fchdir(fd_newroot); pivot_root(".", "."); After the pivot_root(".", ".") call the new rootfs is mounted beneath the old rootfs which can then be unmounted to reveal the underlying mount: fchdir(fd_oldroot); umount2(".", MNT_DETACH); Since pivot_root() moves the caller into a new rootfs no mounts must be propagated out of the new rootfs as a consequence of the pivot_root() call. Thus, the mounts cannot be shared. (2) When a mount is propagated to a mount that already has another mount mounted on the same dentry. The easiest example for this is to create a new mount namespace. The following commands will create a mount namespace where the rootfs mount / will be a slave to the peer group of the host rootfs / mount's peer group. IOW, it will receive propagation from the host: mount --make-shared / unshare --mount --propagation=slave Now a new mount on the /mnt dentry in that mount namespace is created. (As it can be confusing it should be spelled out that the tmpfs mount on the /mnt dentry that was just created doesn't propagate back to the host because the rootfs mount / of the mount namespace isn't a peer of the host rootfs.): mount -t tmpfs tmpfs /mnt TARGET SOURCE FSTYPE PROPAGATION └─/mnt tmpfs tmpfs Now another terminal in the host mount namespace can observe that the mount indeed hasn't propagated back to into the host mount namespace. A new mount can now be created on top of the /mnt dentry with the rootfs mount / as its parent: mount --bind /opt /mnt TARGET SOURCE FSTYPE PROPAGATION └─/mnt /dev/sda2[/opt] ext4 shared:1 The mount namespace that was created earlier can now observe that the bind mount created on the host has propagated into it: TARGET SOURCE FSTYPE PROPAGATION └─/mnt /dev/sda2[/opt] ext4 master:1 └─/mnt tmpfs tmpfs But instead of having been mounted on top of the tmpfs mount at the /mnt dentry the /opt mount has been mounted on top of the rootfs mount at the /mnt dentry. And the tmpfs mount has been remounted on top of the propagated /opt mount at the /opt dentry. So in other words, the propagated mount has been mounted beneath the preexisting mount in that mount namespace. Mount namespaces make this easy to illustrate but it's also easy to mount beneath an existing mount in the same mount namespace (The following example assumes a shared rootfs mount / with peer group id 1): mount --bind /opt /opt TARGET SOURCE FSTYPE MNT_ID PARENT_ID PROPAGATION └─/opt /dev/sda2[/opt] ext4 188 29 shared:1 If another mount is mounted on top of the /opt mount at the /opt dentry: mount --bind /tmp /opt The following clunky mount tree will result: TARGET SOURCE FSTYPE MNT_ID PARENT_ID PROPAGATION └─/opt /dev/sda2[/tmp] ext4 405 29 shared:1 └─/opt /dev/sda2[/opt] ext4 188 405 shared:1 └─/opt /dev/sda2[/tmp] ext4 404 188 shared:1 The /tmp mount is mounted beneath the /opt mount and another copy is mounted on top of the /opt mount. This happens because the rootfs / and the /opt mount are shared mounts in the same peer group. When the new /tmp mount is supposed to be mounted at the /opt dentry then the /tmp mount first propagates to the root mount at the /opt dentry. But there already is the /opt mount mounted at the /opt dentry. So the old /opt mount at the /opt dentry will be mounted on top of the new /tmp mount at the /tmp dentry, i.e. @opt->mnt_parent is @tmp and @opt->mnt_mountpoint is /tmp (Note that @opt->mnt_root is /opt which is what shows up as /opt under SOURCE). So again, a mount will be mounted beneath a preexisting mount. (Fwiw, a few iterations of mount --bind /opt /opt in a loop on a shared rootfs is a good example of what could be referred to as mount explosion.) The main point is that such mounts allows userspace to umount a top mount and reveal an underlying mount. So for example, umounting the tmpfs mount on /mnt that was created in example (1) using mount namespaces reveals the /opt mount which was mounted beneath it. In (2) where a mount was mounted beneath the top mount in the same mount namespace unmounting the top mount would unmount both the top mount and the mount beneath. In the process the original mount would be remounted on top of the rootfs mount / at the /opt dentry again. This again, is a result of mount propagation only this time it's umount propagation. However, this can be avoided by simply making the parent mount / of the @opt mount a private or slave mount. Then the top mount and the original mount can be unmounted to reveal the mount beneath. These two examples are fairly arcane and are merely added to make it clear how mount propagation has effects on current and future features. More common use-cases will just be things like: mount -t btrfs /dev/sdA /mnt mount -t xfs /dev/sdB --beneath /mnt umount /mnt after which we'll have updated from a btrfs filesystem to a xfs filesystem without ever revealing the underlying mountpoint. The crux is that the proposed mechanism already exists and that it is so powerful as to cover cases where mounts are supposed to be updated with new versions. Crucially, it offers an important flexibility. Namely that updates to a system may either be forced or can be delayed and the umount of the top mount be left to a service if it is a cooperative one. This adds a new flag to move_mount() that allows to explicitly move a beneath the top mount adhering to the following semantics: * Mounts cannot be mounted beneath the rootfs. This restriction encompasses the rootfs but also chroots via chroot() and pivot_root(). To mount a mount beneath the rootfs or a chroot, pivot_root() can be used as illustrated above. * The source mount must be a private mount to force the kernel to allocate a new, unused peer group id. This isn't a required restriction but a voluntary one. It avoids repeating a semantical quirk that already exists today. If bind mounts which already have a peer group id are inserted into mount trees that have the same peer group id this can cause a lot of mount propagation events to be generated (For example, consider running mount --bind /opt /opt in a loop where the parent mount is a shared mount.). * Avoid getting rid of the top mount in the kernel. Cooperative services need to be able to unmount the top mount themselves. This also avoids a good deal of additional complexity. The umount would have to be propagated which would be another rather expensive operation. So namespace_lock() and lock_mount_hash() would potentially have to be held for a long time for both a mount and umount propagation. That should be avoided. * The path to mount beneath must be mounted and attached. * The top mount and its parent must be in the caller's mount namespace and the caller must be able to mount in that mount namespace. * The caller must be able to unmount the top mount to prove that they could reveal the underlying mount. * The propagation tree is calculated based on the destination mount's parent mount and the destination mount's mountpoint on the parent mount. Of course, if the parent of the destination mount and the destination mount are shared mounts in the same peer group and the mountpoint of the new mount to be mounted is a subdir of their ->mnt_root then both will receive a mount of /opt. That's probably easier to understand with an example. Assuming a standard shared rootfs /: mount --bind /opt /opt mount --bind /tmp /opt will cause the same mount tree as: mount --bind /opt /opt mount --beneath /tmp /opt because both / and /opt are shared mounts/peers in the same peer group and the /opt dentry is a subdirectory of both the parent's and the child's ->mnt_root. If a mount tree like that is created it almost always is an accident or abuse of mount propagation. Realistically what most people probably mean in this scenarios is: mount --bind /opt /opt mount --make-private /opt mount --make-shared /opt This forces the allocation of a new separate peer group for the /opt mount. Aferwards a mount --bind or mount --beneath actually makes sense as the / and /opt mount belong to different peer groups. Before that it's likely just confusion about what the user wanted to achieve. * Refuse MOVE_MOUNT_BENEATH if: (1) the @mnt_from has been overmounted in between path resolution and acquiring @namespace_sem when locking @mnt_to. This avoids the proliferation of shadow mounts. (2) if @to_mnt is moved to a different mountpoint while acquiring @namespace_sem to lock @to_mnt. (3) if @to_mnt is unmounted while acquiring @namespace_sem to lock @to_mnt. (4) if the parent of the target mount propagates to the target mount at the same mountpoint. This would mean mounting @mnt_from on @mnt_to->mnt_parent and then propagating a copy @c of @mnt_from onto @mnt_to. This defeats the whole purpose of mounting @mnt_from beneath @mnt_to. (5) if the parent mount @mnt_to->mnt_parent propagates to @mnt_from at the same mountpoint. If @mnt_to->mnt_parent propagates to @mnt_from this would mean propagating a copy @c of @mnt_from on top of @mnt_from. Afterwards @mnt_from would be mounted on top of @mnt_to->mnt_parent and @mnt_to would be unmounted from @mnt->mnt_parent and remounted on @mnt_from. But since @c is already mounted on @mnt_from, @mnt_to would ultimately be remounted on top of @c. Afterwards, @mnt_from would be covered by a copy @c of @mnt_from and @c would be covered by @mnt_from itself. This defeats the whole purpose of mounting @mnt_from beneath @mnt_to. Cases (1) to (3) are required as they deal with races that would cause bugs or unexpected behavior for users. Cases (4) and (5) refuse semantical quirks that would not be a bug but would cause weird mount trees to be created. While they can already be created via other means (mount --bind /opt /opt x n) there's no reason to repeat past mistakes in new features. Link: https://man7.org/linux/man-pages/man8/systemd-sysext.8.html [1] Link: https://brauner.io/2023/02/28/mounting-into-mount-namespaces.html [2] Link: https://github.com/flatcar/sysext-bakery Link: https://fedoraproject.org/wiki/Changes/Unified_Kernel_Support_Phase_1 Link: https://fedoraproject.org/wiki/Changes/Unified_Kernel_Support_Phase_2 Link: https://github.com/systemd/systemd/pull/26013 Reviewed-by: Seth Forshee (DigitalOcean) <sforshee@kernel.org> Message-Id: <20230202-fs-move-mount-replace-v4-4-98f3d80d7eaa@kernel.org> Signed-off-by: Christian Brauner <brauner@kernel.org>
2023-05-03 11:18:42 +00:00
static inline struct mountpoint *lock_mount(struct path *path)
{
return do_lock_mount(path, false);
}
static void unlock_mount(struct mountpoint *where)
{
struct dentry *dentry = where->m_dentry;
mnt: Protect the mountpoint hashtable with mount_lock Protecting the mountpoint hashtable with namespace_sem was sufficient until a call to umount_mnt was added to mntput_no_expire. At which point it became possible for multiple calls of put_mountpoint on the same hash chain to happen on the same time. Kristen Johansen <kjlx@templeofstupid.com> reported: > This can cause a panic when simultaneous callers of put_mountpoint > attempt to free the same mountpoint. This occurs because some callers > hold the mount_hash_lock, while others hold the namespace lock. Some > even hold both. > > In this submitter's case, the panic manifested itself as a GP fault in > put_mountpoint() when it called hlist_del() and attempted to dereference > a m_hash.pprev that had been poisioned by another thread. Al Viro observed that the simple fix is to switch from using the namespace_sem to the mount_lock to protect the mountpoint hash table. I have taken Al's suggested patch moved put_mountpoint in pivot_root (instead of taking mount_lock an additional time), and have replaced new_mountpoint with get_mountpoint a function that does the hash table lookup and addition under the mount_lock. The introduction of get_mounptoint ensures that only the mount_lock is needed to manipulate the mountpoint hashtable. d_set_mounted is modified to only set DCACHE_MOUNTED if it is not already set. This allows get_mountpoint to use the setting of DCACHE_MOUNTED to ensure adding a struct mountpoint for a dentry happens exactly once. Cc: stable@vger.kernel.org Fixes: ce07d891a089 ("mnt: Honor MNT_LOCKED when detaching mounts") Reported-by: Krister Johansen <kjlx@templeofstupid.com> Suggested-by: Al Viro <viro@ZenIV.linux.org.uk> Acked-by: Al Viro <viro@ZenIV.linux.org.uk> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2017-01-03 01:18:43 +00:00
read_seqlock_excl(&mount_lock);
put_mountpoint(where);
mnt: Protect the mountpoint hashtable with mount_lock Protecting the mountpoint hashtable with namespace_sem was sufficient until a call to umount_mnt was added to mntput_no_expire. At which point it became possible for multiple calls of put_mountpoint on the same hash chain to happen on the same time. Kristen Johansen <kjlx@templeofstupid.com> reported: > This can cause a panic when simultaneous callers of put_mountpoint > attempt to free the same mountpoint. This occurs because some callers > hold the mount_hash_lock, while others hold the namespace lock. Some > even hold both. > > In this submitter's case, the panic manifested itself as a GP fault in > put_mountpoint() when it called hlist_del() and attempted to dereference > a m_hash.pprev that had been poisioned by another thread. Al Viro observed that the simple fix is to switch from using the namespace_sem to the mount_lock to protect the mountpoint hash table. I have taken Al's suggested patch moved put_mountpoint in pivot_root (instead of taking mount_lock an additional time), and have replaced new_mountpoint with get_mountpoint a function that does the hash table lookup and addition under the mount_lock. The introduction of get_mounptoint ensures that only the mount_lock is needed to manipulate the mountpoint hashtable. d_set_mounted is modified to only set DCACHE_MOUNTED if it is not already set. This allows get_mountpoint to use the setting of DCACHE_MOUNTED to ensure adding a struct mountpoint for a dentry happens exactly once. Cc: stable@vger.kernel.org Fixes: ce07d891a089 ("mnt: Honor MNT_LOCKED when detaching mounts") Reported-by: Krister Johansen <kjlx@templeofstupid.com> Suggested-by: Al Viro <viro@ZenIV.linux.org.uk> Acked-by: Al Viro <viro@ZenIV.linux.org.uk> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2017-01-03 01:18:43 +00:00
read_sequnlock_excl(&mount_lock);
namespace_unlock();
inode_unlock(dentry->d_inode);
}
static int graft_tree(struct mount *mnt, struct mount *p, struct mountpoint *mp)
{
if (mnt->mnt.mnt_sb->s_flags & SB_NOUSER)
return -EINVAL;
VFS: (Scripted) Convert S_ISLNK/DIR/REG(dentry->d_inode) to d_is_*(dentry) Convert the following where appropriate: (1) S_ISLNK(dentry->d_inode) to d_is_symlink(dentry). (2) S_ISREG(dentry->d_inode) to d_is_reg(dentry). (3) S_ISDIR(dentry->d_inode) to d_is_dir(dentry). This is actually more complicated than it appears as some calls should be converted to d_can_lookup() instead. The difference is whether the directory in question is a real dir with a ->lookup op or whether it's a fake dir with a ->d_automount op. In some circumstances, we can subsume checks for dentry->d_inode not being NULL into this, provided we the code isn't in a filesystem that expects d_inode to be NULL if the dirent really *is* negative (ie. if we're going to use d_inode() rather than d_backing_inode() to get the inode pointer). Note that the dentry type field may be set to something other than DCACHE_MISS_TYPE when d_inode is NULL in the case of unionmount, where the VFS manages the fall-through from a negative dentry to a lower layer. In such a case, the dentry type of the negative union dentry is set to the same as the type of the lower dentry. However, if you know d_inode is not NULL at the call site, then you can use the d_is_xxx() functions even in a filesystem. There is one further complication: a 0,0 chardev dentry may be labelled DCACHE_WHITEOUT_TYPE rather than DCACHE_SPECIAL_TYPE. Strictly, this was intended for special directory entry types that don't have attached inodes. The following perl+coccinelle script was used: use strict; my @callers; open($fd, 'git grep -l \'S_IS[A-Z].*->d_inode\' |') || die "Can't grep for S_ISDIR and co. callers"; @callers = <$fd>; close($fd); unless (@callers) { print "No matches\n"; exit(0); } my @cocci = ( '@@', 'expression E;', '@@', '', '- S_ISLNK(E->d_inode->i_mode)', '+ d_is_symlink(E)', '', '@@', 'expression E;', '@@', '', '- S_ISDIR(E->d_inode->i_mode)', '+ d_is_dir(E)', '', '@@', 'expression E;', '@@', '', '- S_ISREG(E->d_inode->i_mode)', '+ d_is_reg(E)' ); my $coccifile = "tmp.sp.cocci"; open($fd, ">$coccifile") || die $coccifile; print($fd "$_\n") || die $coccifile foreach (@cocci); close($fd); foreach my $file (@callers) { chomp $file; print "Processing ", $file, "\n"; system("spatch", "--sp-file", $coccifile, $file, "--in-place", "--no-show-diff") == 0 || die "spatch failed"; } [AV: overlayfs parts skipped] Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-01-29 12:02:35 +00:00
if (d_is_dir(mp->m_dentry) !=
d_is_dir(mnt->mnt.mnt_root))
return -ENOTDIR;
fs: allow to mount beneath top mount Various distributions are adding or are in the process of adding support for system extensions and in the future configuration extensions through various tools. A more detailed explanation on system and configuration extensions can be found on the manpage which is listed below at [1]. System extension images may – dynamically at runtime — extend the /usr/ and /opt/ directory hierarchies with additional files. This is particularly useful on immutable system images where a /usr/ and/or /opt/ hierarchy residing on a read-only file system shall be extended temporarily at runtime without making any persistent modifications. When one or more system extension images are activated, their /usr/ and /opt/ hierarchies are combined via overlayfs with the same hierarchies of the host OS, and the host /usr/ and /opt/ overmounted with it ("merging"). When they are deactivated, the mount point is disassembled — again revealing the unmodified original host version of the hierarchy ("unmerging"). Merging thus makes the extension's resources suddenly appear below the /usr/ and /opt/ hierarchies as if they were included in the base OS image itself. Unmerging makes them disappear again, leaving in place only the files that were shipped with the base OS image itself. System configuration images are similar but operate on directories containing system or service configuration. On nearly all modern distributions mount propagation plays a crucial role and the rootfs of the OS is a shared mount in a peer group (usually with peer group id 1): TARGET SOURCE FSTYPE PROPAGATION MNT_ID PARENT_ID / / ext4 shared:1 29 1 On such systems all services and containers run in a separate mount namespace and are pivot_root()ed into their rootfs. A separate mount namespace is almost always used as it is the minimal isolation mechanism services have. But usually they are even much more isolated up to the point where they almost become indistinguishable from containers. Mount propagation again plays a crucial role here. The rootfs of all these services is a slave mount to the peer group of the host rootfs. This is done so the service will receive mount propagation events from the host when certain files or directories are updated. In addition, the rootfs of each service, container, and sandbox is also a shared mount in its separate peer group: TARGET SOURCE FSTYPE PROPAGATION MNT_ID PARENT_ID / / ext4 shared:24 master:1 71 47 For people not too familiar with mount propagation, the master:1 means that this is a slave mount to peer group 1. Which as one can see is the host rootfs as indicated by shared:1 above. The shared:24 indicates that the service rootfs is a shared mount in a separate peer group with peer group id 24. A service may run other services. Such nested services will also have a rootfs mount that is a slave to the peer group of the outer service rootfs mount. For containers things are just slighly different. A container's rootfs isn't a slave to the service's or host rootfs' peer group. The rootfs mount of a container is simply a shared mount in its own peer group: TARGET SOURCE FSTYPE PROPAGATION MNT_ID PARENT_ID /home/ubuntu/debian-tree / ext4 shared:99 61 60 So whereas services are isolated OS components a container is treated like a separate world and mount propagation into it is restricted to a single well known mount that is a slave to the peer group of the shared mount /run on the host: TARGET SOURCE FSTYPE PROPAGATION MNT_ID PARENT_ID /propagate/debian-tree /run/host/incoming tmpfs master:5 71 68 Here, the master:5 indicates that this mount is a slave to the peer group with peer group id 5. This allows to propagate mounts into the container and served as a workaround for not being able to insert mounts into mount namespaces directly. But the new mount api does support inserting mounts directly. For the interested reader the blogpost in [2] might be worth reading where I explain the old and the new approach to inserting mounts into mount namespaces. Containers of course, can themselves be run as services. They often run full systems themselves which means they again run services and containers with the exact same propagation settings explained above. The whole system is designed so that it can be easily updated, including all services in various fine-grained ways without having to enter every single service's mount namespace which would be prohibitively expensive. The mount propagation layout has been carefully chosen so it is possible to propagate updates for system extensions and configurations from the host into all services. The simplest model to update the whole system is to mount on top of /usr, /opt, or /etc on the host. The new mount on /usr, /opt, or /etc will then propagate into every service. This works cleanly the first time. However, when the system is updated multiple times it becomes necessary to unmount the first update on /opt, /usr, /etc and then propagate the new update. But this means, there's an interval where the old base system is accessible. This has to be avoided to protect against downgrade attacks. The vfs already exposes a mechanism to userspace whereby mounts can be mounted beneath an existing mount. Such mounts are internally referred to as "tucked". The patch series exposes the ability to mount beneath a top mount through the new MOVE_MOUNT_BENEATH flag for the move_mount() system call. This allows userspace to seamlessly upgrade mounts. After this series the only thing that will have changed is that mounting beneath an existing mount can be done explicitly instead of just implicitly. Today, there are two scenarios where a mount can be mounted beneath an existing mount instead of on top of it: (1) When a service or container is started in a new mount namespace and pivot_root()s into its new rootfs. The way this is done is by mounting the new rootfs beneath the old rootfs: fd_newroot = open("/var/lib/machines/fedora", ...); fd_oldroot = open("/", ...); fchdir(fd_newroot); pivot_root(".", "."); After the pivot_root(".", ".") call the new rootfs is mounted beneath the old rootfs which can then be unmounted to reveal the underlying mount: fchdir(fd_oldroot); umount2(".", MNT_DETACH); Since pivot_root() moves the caller into a new rootfs no mounts must be propagated out of the new rootfs as a consequence of the pivot_root() call. Thus, the mounts cannot be shared. (2) When a mount is propagated to a mount that already has another mount mounted on the same dentry. The easiest example for this is to create a new mount namespace. The following commands will create a mount namespace where the rootfs mount / will be a slave to the peer group of the host rootfs / mount's peer group. IOW, it will receive propagation from the host: mount --make-shared / unshare --mount --propagation=slave Now a new mount on the /mnt dentry in that mount namespace is created. (As it can be confusing it should be spelled out that the tmpfs mount on the /mnt dentry that was just created doesn't propagate back to the host because the rootfs mount / of the mount namespace isn't a peer of the host rootfs.): mount -t tmpfs tmpfs /mnt TARGET SOURCE FSTYPE PROPAGATION └─/mnt tmpfs tmpfs Now another terminal in the host mount namespace can observe that the mount indeed hasn't propagated back to into the host mount namespace. A new mount can now be created on top of the /mnt dentry with the rootfs mount / as its parent: mount --bind /opt /mnt TARGET SOURCE FSTYPE PROPAGATION └─/mnt /dev/sda2[/opt] ext4 shared:1 The mount namespace that was created earlier can now observe that the bind mount created on the host has propagated into it: TARGET SOURCE FSTYPE PROPAGATION └─/mnt /dev/sda2[/opt] ext4 master:1 └─/mnt tmpfs tmpfs But instead of having been mounted on top of the tmpfs mount at the /mnt dentry the /opt mount has been mounted on top of the rootfs mount at the /mnt dentry. And the tmpfs mount has been remounted on top of the propagated /opt mount at the /opt dentry. So in other words, the propagated mount has been mounted beneath the preexisting mount in that mount namespace. Mount namespaces make this easy to illustrate but it's also easy to mount beneath an existing mount in the same mount namespace (The following example assumes a shared rootfs mount / with peer group id 1): mount --bind /opt /opt TARGET SOURCE FSTYPE MNT_ID PARENT_ID PROPAGATION └─/opt /dev/sda2[/opt] ext4 188 29 shared:1 If another mount is mounted on top of the /opt mount at the /opt dentry: mount --bind /tmp /opt The following clunky mount tree will result: TARGET SOURCE FSTYPE MNT_ID PARENT_ID PROPAGATION └─/opt /dev/sda2[/tmp] ext4 405 29 shared:1 └─/opt /dev/sda2[/opt] ext4 188 405 shared:1 └─/opt /dev/sda2[/tmp] ext4 404 188 shared:1 The /tmp mount is mounted beneath the /opt mount and another copy is mounted on top of the /opt mount. This happens because the rootfs / and the /opt mount are shared mounts in the same peer group. When the new /tmp mount is supposed to be mounted at the /opt dentry then the /tmp mount first propagates to the root mount at the /opt dentry. But there already is the /opt mount mounted at the /opt dentry. So the old /opt mount at the /opt dentry will be mounted on top of the new /tmp mount at the /tmp dentry, i.e. @opt->mnt_parent is @tmp and @opt->mnt_mountpoint is /tmp (Note that @opt->mnt_root is /opt which is what shows up as /opt under SOURCE). So again, a mount will be mounted beneath a preexisting mount. (Fwiw, a few iterations of mount --bind /opt /opt in a loop on a shared rootfs is a good example of what could be referred to as mount explosion.) The main point is that such mounts allows userspace to umount a top mount and reveal an underlying mount. So for example, umounting the tmpfs mount on /mnt that was created in example (1) using mount namespaces reveals the /opt mount which was mounted beneath it. In (2) where a mount was mounted beneath the top mount in the same mount namespace unmounting the top mount would unmount both the top mount and the mount beneath. In the process the original mount would be remounted on top of the rootfs mount / at the /opt dentry again. This again, is a result of mount propagation only this time it's umount propagation. However, this can be avoided by simply making the parent mount / of the @opt mount a private or slave mount. Then the top mount and the original mount can be unmounted to reveal the mount beneath. These two examples are fairly arcane and are merely added to make it clear how mount propagation has effects on current and future features. More common use-cases will just be things like: mount -t btrfs /dev/sdA /mnt mount -t xfs /dev/sdB --beneath /mnt umount /mnt after which we'll have updated from a btrfs filesystem to a xfs filesystem without ever revealing the underlying mountpoint. The crux is that the proposed mechanism already exists and that it is so powerful as to cover cases where mounts are supposed to be updated with new versions. Crucially, it offers an important flexibility. Namely that updates to a system may either be forced or can be delayed and the umount of the top mount be left to a service if it is a cooperative one. This adds a new flag to move_mount() that allows to explicitly move a beneath the top mount adhering to the following semantics: * Mounts cannot be mounted beneath the rootfs. This restriction encompasses the rootfs but also chroots via chroot() and pivot_root(). To mount a mount beneath the rootfs or a chroot, pivot_root() can be used as illustrated above. * The source mount must be a private mount to force the kernel to allocate a new, unused peer group id. This isn't a required restriction but a voluntary one. It avoids repeating a semantical quirk that already exists today. If bind mounts which already have a peer group id are inserted into mount trees that have the same peer group id this can cause a lot of mount propagation events to be generated (For example, consider running mount --bind /opt /opt in a loop where the parent mount is a shared mount.). * Avoid getting rid of the top mount in the kernel. Cooperative services need to be able to unmount the top mount themselves. This also avoids a good deal of additional complexity. The umount would have to be propagated which would be another rather expensive operation. So namespace_lock() and lock_mount_hash() would potentially have to be held for a long time for both a mount and umount propagation. That should be avoided. * The path to mount beneath must be mounted and attached. * The top mount and its parent must be in the caller's mount namespace and the caller must be able to mount in that mount namespace. * The caller must be able to unmount the top mount to prove that they could reveal the underlying mount. * The propagation tree is calculated based on the destination mount's parent mount and the destination mount's mountpoint on the parent mount. Of course, if the parent of the destination mount and the destination mount are shared mounts in the same peer group and the mountpoint of the new mount to be mounted is a subdir of their ->mnt_root then both will receive a mount of /opt. That's probably easier to understand with an example. Assuming a standard shared rootfs /: mount --bind /opt /opt mount --bind /tmp /opt will cause the same mount tree as: mount --bind /opt /opt mount --beneath /tmp /opt because both / and /opt are shared mounts/peers in the same peer group and the /opt dentry is a subdirectory of both the parent's and the child's ->mnt_root. If a mount tree like that is created it almost always is an accident or abuse of mount propagation. Realistically what most people probably mean in this scenarios is: mount --bind /opt /opt mount --make-private /opt mount --make-shared /opt This forces the allocation of a new separate peer group for the /opt mount. Aferwards a mount --bind or mount --beneath actually makes sense as the / and /opt mount belong to different peer groups. Before that it's likely just confusion about what the user wanted to achieve. * Refuse MOVE_MOUNT_BENEATH if: (1) the @mnt_from has been overmounted in between path resolution and acquiring @namespace_sem when locking @mnt_to. This avoids the proliferation of shadow mounts. (2) if @to_mnt is moved to a different mountpoint while acquiring @namespace_sem to lock @to_mnt. (3) if @to_mnt is unmounted while acquiring @namespace_sem to lock @to_mnt. (4) if the parent of the target mount propagates to the target mount at the same mountpoint. This would mean mounting @mnt_from on @mnt_to->mnt_parent and then propagating a copy @c of @mnt_from onto @mnt_to. This defeats the whole purpose of mounting @mnt_from beneath @mnt_to. (5) if the parent mount @mnt_to->mnt_parent propagates to @mnt_from at the same mountpoint. If @mnt_to->mnt_parent propagates to @mnt_from this would mean propagating a copy @c of @mnt_from on top of @mnt_from. Afterwards @mnt_from would be mounted on top of @mnt_to->mnt_parent and @mnt_to would be unmounted from @mnt->mnt_parent and remounted on @mnt_from. But since @c is already mounted on @mnt_from, @mnt_to would ultimately be remounted on top of @c. Afterwards, @mnt_from would be covered by a copy @c of @mnt_from and @c would be covered by @mnt_from itself. This defeats the whole purpose of mounting @mnt_from beneath @mnt_to. Cases (1) to (3) are required as they deal with races that would cause bugs or unexpected behavior for users. Cases (4) and (5) refuse semantical quirks that would not be a bug but would cause weird mount trees to be created. While they can already be created via other means (mount --bind /opt /opt x n) there's no reason to repeat past mistakes in new features. Link: https://man7.org/linux/man-pages/man8/systemd-sysext.8.html [1] Link: https://brauner.io/2023/02/28/mounting-into-mount-namespaces.html [2] Link: https://github.com/flatcar/sysext-bakery Link: https://fedoraproject.org/wiki/Changes/Unified_Kernel_Support_Phase_1 Link: https://fedoraproject.org/wiki/Changes/Unified_Kernel_Support_Phase_2 Link: https://github.com/systemd/systemd/pull/26013 Reviewed-by: Seth Forshee (DigitalOcean) <sforshee@kernel.org> Message-Id: <20230202-fs-move-mount-replace-v4-4-98f3d80d7eaa@kernel.org> Signed-off-by: Christian Brauner <brauner@kernel.org>
2023-05-03 11:18:42 +00:00
return attach_recursive_mnt(mnt, p, mp, 0);
}
/*
* Sanity check the flags to change_mnt_propagation.
*/
static int flags_to_propagation_type(int ms_flags)
{
int type = ms_flags & ~(MS_REC | MS_SILENT);
/* Fail if any non-propagation flags are set */
if (type & ~(MS_SHARED | MS_PRIVATE | MS_SLAVE | MS_UNBINDABLE))
return 0;
/* Only one propagation flag should be set */
if (!is_power_of_2(type))
return 0;
return type;
}
/*
* recursively change the type of the mountpoint.
*/
static int do_change_type(struct path *path, int ms_flags)
{
struct mount *m;
struct mount *mnt = real_mount(path->mnt);
int recurse = ms_flags & MS_REC;
int type;
int err = 0;
if (!path_mounted(path))
return -EINVAL;
type = flags_to_propagation_type(ms_flags);
if (!type)
return -EINVAL;
namespace_lock();
if (type == MS_SHARED) {
err = invent_group_ids(mnt, recurse);
if (err)
goto out_unlock;
}
lock_mount_hash();
for (m = mnt; m; m = (recurse ? next_mnt(m, mnt) : NULL))
change_mnt_propagation(m, type);
unlock_mount_hash();
out_unlock:
namespace_unlock();
return err;
}
static struct mount *__do_loopback(struct path *old_path, int recurse)
{
struct mount *mnt = ERR_PTR(-EINVAL), *old = real_mount(old_path->mnt);
if (IS_MNT_UNBINDABLE(old))
return mnt;
if (!check_mnt(old) && old_path->dentry->d_op != &ns_dentry_operations)
return mnt;
if (!recurse && has_locked_children(old, old_path->dentry))
return mnt;
if (recurse)
mnt = copy_tree(old, old_path->dentry, CL_COPY_MNT_NS_FILE);
else
mnt = clone_mnt(old, old_path->dentry, 0);
if (!IS_ERR(mnt))
mnt->mnt.mnt_flags &= ~MNT_LOCKED;
return mnt;
}
/*
* do loopback mount.
*/
static int do_loopback(struct path *path, const char *old_name,
int recurse)
{
struct path old_path;
struct mount *mnt = NULL, *parent;
struct mountpoint *mp;
int err;
if (!old_name || !*old_name)
return -EINVAL;
err = kern_path(old_name, LOOKUP_FOLLOW|LOOKUP_AUTOMOUNT, &old_path);
if (err)
return err;
err = -EINVAL;
if (mnt_ns_loop(old_path.dentry))
goto out;
mp = lock_mount(path);
if (IS_ERR(mp)) {
err = PTR_ERR(mp);
goto out;
}
parent = real_mount(path->mnt);
if (!check_mnt(parent))
goto out2;
mnt = __do_loopback(&old_path, recurse);
if (IS_ERR(mnt)) {
err = PTR_ERR(mnt);
goto out2;
}
err = graft_tree(mnt, parent, mp);
if (err) {
lock_mount_hash();
umount_tree(mnt, UMOUNT_SYNC);
unlock_mount_hash();
}
out2:
unlock_mount(mp);
out:
path_put(&old_path);
return err;
}
static struct file *open_detached_copy(struct path *path, bool recursive)
{
struct user_namespace *user_ns = current->nsproxy->mnt_ns->user_ns;
struct mnt_namespace *ns = alloc_mnt_ns(user_ns, true);
struct mount *mnt, *p;
struct file *file;
if (IS_ERR(ns))
return ERR_CAST(ns);
namespace_lock();
mnt = __do_loopback(path, recursive);
if (IS_ERR(mnt)) {
namespace_unlock();
free_mnt_ns(ns);
return ERR_CAST(mnt);
}
lock_mount_hash();
for (p = mnt; p; p = next_mnt(p, mnt)) {
mnt_add_to_ns(ns, p);
ns->nr_mounts++;
}
ns->root = mnt;
mntget(&mnt->mnt);
unlock_mount_hash();
namespace_unlock();
mntput(path->mnt);
path->mnt = &mnt->mnt;
file = dentry_open(path, O_PATH, current_cred());
if (IS_ERR(file))
dissolve_on_fput(path->mnt);
else
file->f_mode |= FMODE_NEED_UNMOUNT;
return file;
}
SYSCALL_DEFINE3(open_tree, int, dfd, const char __user *, filename, unsigned, flags)
{
struct file *file;
struct path path;
int lookup_flags = LOOKUP_AUTOMOUNT | LOOKUP_FOLLOW;
bool detached = flags & OPEN_TREE_CLONE;
int error;
int fd;
BUILD_BUG_ON(OPEN_TREE_CLOEXEC != O_CLOEXEC);
if (flags & ~(AT_EMPTY_PATH | AT_NO_AUTOMOUNT | AT_RECURSIVE |
AT_SYMLINK_NOFOLLOW | OPEN_TREE_CLONE |
OPEN_TREE_CLOEXEC))
return -EINVAL;
if ((flags & (AT_RECURSIVE | OPEN_TREE_CLONE)) == AT_RECURSIVE)
return -EINVAL;
if (flags & AT_NO_AUTOMOUNT)
lookup_flags &= ~LOOKUP_AUTOMOUNT;
if (flags & AT_SYMLINK_NOFOLLOW)
lookup_flags &= ~LOOKUP_FOLLOW;
if (flags & AT_EMPTY_PATH)
lookup_flags |= LOOKUP_EMPTY;
if (detached && !may_mount())
return -EPERM;
fd = get_unused_fd_flags(flags & O_CLOEXEC);
if (fd < 0)
return fd;
error = user_path_at(dfd, filename, lookup_flags, &path);
if (unlikely(error)) {
file = ERR_PTR(error);
} else {
if (detached)
file = open_detached_copy(&path, flags & AT_RECURSIVE);
else
file = dentry_open(&path, O_PATH, current_cred());
path_put(&path);
}
if (IS_ERR(file)) {
put_unused_fd(fd);
return PTR_ERR(file);
}
fd_install(fd, file);
return fd;
}
/*
* Don't allow locked mount flags to be cleared.
*
* No locks need to be held here while testing the various MNT_LOCK
* flags because those flags can never be cleared once they are set.
*/
static bool can_change_locked_flags(struct mount *mnt, unsigned int mnt_flags)
{
unsigned int fl = mnt->mnt.mnt_flags;
if ((fl & MNT_LOCK_READONLY) &&
!(mnt_flags & MNT_READONLY))
return false;
if ((fl & MNT_LOCK_NODEV) &&
!(mnt_flags & MNT_NODEV))
return false;
if ((fl & MNT_LOCK_NOSUID) &&
!(mnt_flags & MNT_NOSUID))
return false;
if ((fl & MNT_LOCK_NOEXEC) &&
!(mnt_flags & MNT_NOEXEC))
return false;
if ((fl & MNT_LOCK_ATIME) &&
((fl & MNT_ATIME_MASK) != (mnt_flags & MNT_ATIME_MASK)))
return false;
return true;
}
static int change_mount_ro_state(struct mount *mnt, unsigned int mnt_flags)
{
bool readonly_request = (mnt_flags & MNT_READONLY);
if (readonly_request == __mnt_is_readonly(&mnt->mnt))
return 0;
if (readonly_request)
return mnt_make_readonly(mnt);
mnt->mnt.mnt_flags &= ~MNT_READONLY;
return 0;
}
static void set_mount_attributes(struct mount *mnt, unsigned int mnt_flags)
{
mnt_flags |= mnt->mnt.mnt_flags & ~MNT_USER_SETTABLE_MASK;
mnt->mnt.mnt_flags = mnt_flags;
touch_mnt_namespace(mnt->mnt_ns);
}
static void mnt_warn_timestamp_expiry(struct path *mountpoint, struct vfsmount *mnt)
{
struct super_block *sb = mnt->mnt_sb;
if (!__mnt_is_readonly(mnt) &&
(!(sb->s_iflags & SB_I_TS_EXPIRY_WARNED)) &&
(ktime_get_real_seconds() + TIME_UPTIME_SEC_MAX > sb->s_time_max)) {
char *buf, *mntpath;
buf = (char *)__get_free_page(GFP_KERNEL);
if (buf)
mntpath = d_path(mountpoint, buf, PAGE_SIZE);
else
mntpath = ERR_PTR(-ENOMEM);
if (IS_ERR(mntpath))
mntpath = "(unknown)";
pr_warn("%s filesystem being %s at %s supports timestamps until %ptTd (0x%llx)\n",
sb->s_type->name,
is_mounted(mnt) ? "remounted" : "mounted",
mntpath, &sb->s_time_max,
(unsigned long long)sb->s_time_max);
sb->s_iflags |= SB_I_TS_EXPIRY_WARNED;
if (buf)
free_page((unsigned long)buf);
}
}
/*
* Handle reconfiguration of the mountpoint only without alteration of the
* superblock it refers to. This is triggered by specifying MS_REMOUNT|MS_BIND
* to mount(2).
*/
static int do_reconfigure_mnt(struct path *path, unsigned int mnt_flags)
{
struct super_block *sb = path->mnt->mnt_sb;
struct mount *mnt = real_mount(path->mnt);
int ret;
if (!check_mnt(mnt))
return -EINVAL;
if (!path_mounted(path))
return -EINVAL;
if (!can_change_locked_flags(mnt, mnt_flags))
return -EPERM;
namespace: only take read lock in do_reconfigure_mnt() do_reconfigure_mnt() used to take the down_write(&sb->s_umount) lock which seems unnecessary since we're not changing the superblock. We're only checking whether it is already read-only. Setting other mount attributes is protected by lock_mount_hash() afaict and not by s_umount. The history of down_write(&sb->s_umount) lock being taken when setting mount attributes dates back to the introduction of MNT_READONLY in [2]. This introduced the concept of having read-only mounts in contrast to just having a read-only superblock. When it got introduced it was simply plumbed into do_remount() which already took down_write(&sb->s_umount) because it was only used to actually change the superblock before [2]. Afaict, it would've already been possible back then to only use down_read(&sb->s_umount) for MS_BIND | MS_REMOUNT since actual mount options were protected by the vfsmount lock already. But that would've meant special casing the locking for MS_BIND | MS_REMOUNT in do_remount() which people might not have considered worth it. Then in [1] MS_BIND | MS_REMOUNT mount option changes were split out of do_remount() into do_reconfigure_mnt() but the down_write(&sb->s_umount) lock was simply copied over. Now that we have this be a separate helper only take the down_read(&sb->s_umount) lock since we're only interested in checking whether the super block is currently read-only and blocking any writers from changing it. Essentially, checking that the super block is read-only has the advantage that we can avoid having to go into the slowpath and through MNT_WRITE_HOLD and can simply set the read-only flag on the mount in set_mount_attributes(). [1]: commit 43f5e655eff7 ("vfs: Separate changing mount flags full remount") [2]: commit 2e4b7fcd9260 ("[PATCH] r/o bind mounts: honor mount writer counts at remount") Link: https://lore.kernel.org/r/20210121131959.646623-32-christian.brauner@ubuntu.com Cc: David Howells <dhowells@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: linux-fsdevel@vger.kernel.org Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
2021-01-21 13:19:50 +00:00
/*
* We're only checking whether the superblock is read-only not
* changing it, so only take down_read(&sb->s_umount).
*/
down_read(&sb->s_umount);
lock_mount_hash();
ret = change_mount_ro_state(mnt, mnt_flags);
if (ret == 0)
set_mount_attributes(mnt, mnt_flags);
unlock_mount_hash();
namespace: only take read lock in do_reconfigure_mnt() do_reconfigure_mnt() used to take the down_write(&sb->s_umount) lock which seems unnecessary since we're not changing the superblock. We're only checking whether it is already read-only. Setting other mount attributes is protected by lock_mount_hash() afaict and not by s_umount. The history of down_write(&sb->s_umount) lock being taken when setting mount attributes dates back to the introduction of MNT_READONLY in [2]. This introduced the concept of having read-only mounts in contrast to just having a read-only superblock. When it got introduced it was simply plumbed into do_remount() which already took down_write(&sb->s_umount) because it was only used to actually change the superblock before [2]. Afaict, it would've already been possible back then to only use down_read(&sb->s_umount) for MS_BIND | MS_REMOUNT since actual mount options were protected by the vfsmount lock already. But that would've meant special casing the locking for MS_BIND | MS_REMOUNT in do_remount() which people might not have considered worth it. Then in [1] MS_BIND | MS_REMOUNT mount option changes were split out of do_remount() into do_reconfigure_mnt() but the down_write(&sb->s_umount) lock was simply copied over. Now that we have this be a separate helper only take the down_read(&sb->s_umount) lock since we're only interested in checking whether the super block is currently read-only and blocking any writers from changing it. Essentially, checking that the super block is read-only has the advantage that we can avoid having to go into the slowpath and through MNT_WRITE_HOLD and can simply set the read-only flag on the mount in set_mount_attributes(). [1]: commit 43f5e655eff7 ("vfs: Separate changing mount flags full remount") [2]: commit 2e4b7fcd9260 ("[PATCH] r/o bind mounts: honor mount writer counts at remount") Link: https://lore.kernel.org/r/20210121131959.646623-32-christian.brauner@ubuntu.com Cc: David Howells <dhowells@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: linux-fsdevel@vger.kernel.org Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
2021-01-21 13:19:50 +00:00
up_read(&sb->s_umount);
mnt_warn_timestamp_expiry(path, &mnt->mnt);
return ret;
}
/*
* change filesystem flags. dir should be a physical root of filesystem.
* If you've mounted a non-root directory somewhere and want to do remount
* on it - tough luck.
*/
static int do_remount(struct path *path, int ms_flags, int sb_flags,
int mnt_flags, void *data)
{
int err;
struct super_block *sb = path->mnt->mnt_sb;
struct mount *mnt = real_mount(path->mnt);
struct fs_context *fc;
if (!check_mnt(mnt))
return -EINVAL;
if (!path_mounted(path))
return -EINVAL;
if (!can_change_locked_flags(mnt, mnt_flags))
mnt: Correct permission checks in do_remount While invesgiating the issue where in "mount --bind -oremount,ro ..." would result in later "mount --bind -oremount,rw" succeeding even if the mount started off locked I realized that there are several additional mount flags that should be locked and are not. In particular MNT_NOSUID, MNT_NODEV, MNT_NOEXEC, and the atime flags in addition to MNT_READONLY should all be locked. These flags are all per superblock, can all be changed with MS_BIND, and should not be changable if set by a more privileged user. The following additions to the current logic are added in this patch. - nosuid may not be clearable by a less privileged user. - nodev may not be clearable by a less privielged user. - noexec may not be clearable by a less privileged user. - atime flags may not be changeable by a less privileged user. The logic with atime is that always setting atime on access is a global policy and backup software and auditing software could break if atime bits are not updated (when they are configured to be updated), and serious performance degradation could result (DOS attack) if atime updates happen when they have been explicitly disabled. Therefore an unprivileged user should not be able to mess with the atime bits set by a more privileged user. The additional restrictions are implemented with the addition of MNT_LOCK_NOSUID, MNT_LOCK_NODEV, MNT_LOCK_NOEXEC, and MNT_LOCK_ATIME mnt flags. Taken together these changes and the fixes for MNT_LOCK_READONLY should make it safe for an unprivileged user to create a user namespace and to call "mount --bind -o remount,... ..." without the danger of mount flags being changed maliciously. Cc: stable@vger.kernel.org Acked-by: Serge E. Hallyn <serge.hallyn@ubuntu.com> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2014-07-29 00:26:07 +00:00
return -EPERM;
fc = fs_context_for_reconfigure(path->dentry, sb_flags, MS_RMT_MASK);
if (IS_ERR(fc))
return PTR_ERR(fc);
/*
* Indicate to the filesystem that the remount request is coming
* from the legacy mount system call.
*/
fc->oldapi = true;
err = parse_monolithic_mount_data(fc, data);
if (!err) {
down_write(&sb->s_umount);
err = -EPERM;
if (ns_capable(sb->s_user_ns, CAP_SYS_ADMIN)) {
err = reconfigure_super(fc);
if (!err) {
lock_mount_hash();
set_mount_attributes(mnt, mnt_flags);
unlock_mount_hash();
}
}
up_write(&sb->s_umount);
}
mnt_warn_timestamp_expiry(path, &mnt->mnt);
put_fs_context(fc);
return err;
}
static inline int tree_contains_unbindable(struct mount *mnt)
{
struct mount *p;
for (p = mnt; p; p = next_mnt(p, mnt)) {
if (IS_MNT_UNBINDABLE(p))
return 1;
}
return 0;
}
/*
* Check that there aren't references to earlier/same mount namespaces in the
* specified subtree. Such references can act as pins for mount namespaces
* that aren't checked by the mount-cycle checking code, thereby allowing
* cycles to be made.
*/
static bool check_for_nsfs_mounts(struct mount *subtree)
{
struct mount *p;
bool ret = false;
lock_mount_hash();
for (p = subtree; p; p = next_mnt(p, subtree))
if (mnt_ns_loop(p->mnt.mnt_root))
goto out;
ret = true;
out:
unlock_mount_hash();
return ret;
}
move_mount: allow to add a mount into an existing group Previously a sharing group (shared and master ids pair) can be only inherited when mount is created via bindmount. This patch adds an ability to add an existing private mount into an existing sharing group. With this functionality one can first create the desired mount tree from only private mounts (without the need to care about undesired mount propagation or mount creation order implied by sharing group dependencies), and next then setup any desired mount sharing between those mounts in tree as needed. This allows CRIU to restore any set of mount namespaces, mount trees and sharing group trees for a container. We have many issues with restoring mounts in CRIU related to sharing groups and propagation: - reverse sharing groups vs mount tree order requires complex mounts reordering which mostly implies also using some temporary mounts (please see https://lkml.org/lkml/2021/3/23/569 for more info) - mount() syscall creates tons of mounts due to propagation - mount re-parenting due to propagation - "Mount Trap" due to propagation - "Non Uniform" propagation, meaning that with different tricks with mount order and temporary children-"lock" mounts one can create mount trees which can't be restored without those tricks (see https://www.linuxplumbersconf.org/event/7/contributions/640/) With this new functionality we can resolve all the problems with propagation at once. Link: https://lore.kernel.org/r/20210715100714.120228-1-ptikhomirov@virtuozzo.com Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Christian Brauner <christian.brauner@ubuntu.com> Cc: Mattias Nissler <mnissler@chromium.org> Cc: Aleksa Sarai <cyphar@cyphar.com> Cc: Andrei Vagin <avagin@gmail.com> Cc: linux-fsdevel@vger.kernel.org Cc: linux-api@vger.kernel.org Cc: lkml <linux-kernel@vger.kernel.org> Co-developed-by: Andrei Vagin <avagin@gmail.com> Acked-by: Christian Brauner <christian.brauner@ubuntu.com> Signed-off-by: Pavel Tikhomirov <ptikhomirov@virtuozzo.com> Signed-off-by: Andrei Vagin <avagin@gmail.com> Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
2021-07-15 10:07:13 +00:00
static int do_set_group(struct path *from_path, struct path *to_path)
{
struct mount *from, *to;
int err;
from = real_mount(from_path->mnt);
to = real_mount(to_path->mnt);
namespace_lock();
err = -EINVAL;
/* To and From must be mounted */
if (!is_mounted(&from->mnt))
goto out;
if (!is_mounted(&to->mnt))
goto out;
err = -EPERM;
/* We should be allowed to modify mount namespaces of both mounts */
if (!ns_capable(from->mnt_ns->user_ns, CAP_SYS_ADMIN))
goto out;
if (!ns_capable(to->mnt_ns->user_ns, CAP_SYS_ADMIN))
goto out;
err = -EINVAL;
/* To and From paths should be mount roots */
if (!path_mounted(from_path))
move_mount: allow to add a mount into an existing group Previously a sharing group (shared and master ids pair) can be only inherited when mount is created via bindmount. This patch adds an ability to add an existing private mount into an existing sharing group. With this functionality one can first create the desired mount tree from only private mounts (without the need to care about undesired mount propagation or mount creation order implied by sharing group dependencies), and next then setup any desired mount sharing between those mounts in tree as needed. This allows CRIU to restore any set of mount namespaces, mount trees and sharing group trees for a container. We have many issues with restoring mounts in CRIU related to sharing groups and propagation: - reverse sharing groups vs mount tree order requires complex mounts reordering which mostly implies also using some temporary mounts (please see https://lkml.org/lkml/2021/3/23/569 for more info) - mount() syscall creates tons of mounts due to propagation - mount re-parenting due to propagation - "Mount Trap" due to propagation - "Non Uniform" propagation, meaning that with different tricks with mount order and temporary children-"lock" mounts one can create mount trees which can't be restored without those tricks (see https://www.linuxplumbersconf.org/event/7/contributions/640/) With this new functionality we can resolve all the problems with propagation at once. Link: https://lore.kernel.org/r/20210715100714.120228-1-ptikhomirov@virtuozzo.com Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Christian Brauner <christian.brauner@ubuntu.com> Cc: Mattias Nissler <mnissler@chromium.org> Cc: Aleksa Sarai <cyphar@cyphar.com> Cc: Andrei Vagin <avagin@gmail.com> Cc: linux-fsdevel@vger.kernel.org Cc: linux-api@vger.kernel.org Cc: lkml <linux-kernel@vger.kernel.org> Co-developed-by: Andrei Vagin <avagin@gmail.com> Acked-by: Christian Brauner <christian.brauner@ubuntu.com> Signed-off-by: Pavel Tikhomirov <ptikhomirov@virtuozzo.com> Signed-off-by: Andrei Vagin <avagin@gmail.com> Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
2021-07-15 10:07:13 +00:00
goto out;
if (!path_mounted(to_path))
move_mount: allow to add a mount into an existing group Previously a sharing group (shared and master ids pair) can be only inherited when mount is created via bindmount. This patch adds an ability to add an existing private mount into an existing sharing group. With this functionality one can first create the desired mount tree from only private mounts (without the need to care about undesired mount propagation or mount creation order implied by sharing group dependencies), and next then setup any desired mount sharing between those mounts in tree as needed. This allows CRIU to restore any set of mount namespaces, mount trees and sharing group trees for a container. We have many issues with restoring mounts in CRIU related to sharing groups and propagation: - reverse sharing groups vs mount tree order requires complex mounts reordering which mostly implies also using some temporary mounts (please see https://lkml.org/lkml/2021/3/23/569 for more info) - mount() syscall creates tons of mounts due to propagation - mount re-parenting due to propagation - "Mount Trap" due to propagation - "Non Uniform" propagation, meaning that with different tricks with mount order and temporary children-"lock" mounts one can create mount trees which can't be restored without those tricks (see https://www.linuxplumbersconf.org/event/7/contributions/640/) With this new functionality we can resolve all the problems with propagation at once. Link: https://lore.kernel.org/r/20210715100714.120228-1-ptikhomirov@virtuozzo.com Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Christian Brauner <christian.brauner@ubuntu.com> Cc: Mattias Nissler <mnissler@chromium.org> Cc: Aleksa Sarai <cyphar@cyphar.com> Cc: Andrei Vagin <avagin@gmail.com> Cc: linux-fsdevel@vger.kernel.org Cc: linux-api@vger.kernel.org Cc: lkml <linux-kernel@vger.kernel.org> Co-developed-by: Andrei Vagin <avagin@gmail.com> Acked-by: Christian Brauner <christian.brauner@ubuntu.com> Signed-off-by: Pavel Tikhomirov <ptikhomirov@virtuozzo.com> Signed-off-by: Andrei Vagin <avagin@gmail.com> Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
2021-07-15 10:07:13 +00:00
goto out;
/* Setting sharing groups is only allowed across same superblock */
if (from->mnt.mnt_sb != to->mnt.mnt_sb)
goto out;
/* From mount root should be wider than To mount root */
if (!is_subdir(to->mnt.mnt_root, from->mnt.mnt_root))
goto out;
/* From mount should not have locked children in place of To's root */
if (has_locked_children(from, to->mnt.mnt_root))
goto out;
/* Setting sharing groups is only allowed on private mounts */
if (IS_MNT_SHARED(to) || IS_MNT_SLAVE(to))
goto out;
/* From should not be private */
if (!IS_MNT_SHARED(from) && !IS_MNT_SLAVE(from))
goto out;
if (IS_MNT_SLAVE(from)) {
struct mount *m = from->mnt_master;
list_add(&to->mnt_slave, &m->mnt_slave_list);
to->mnt_master = m;
}
if (IS_MNT_SHARED(from)) {
to->mnt_group_id = from->mnt_group_id;
list_add(&to->mnt_share, &from->mnt_share);
lock_mount_hash();
set_mnt_shared(to);
unlock_mount_hash();
}
err = 0;
out:
namespace_unlock();
return err;
}
fs: allow to mount beneath top mount Various distributions are adding or are in the process of adding support for system extensions and in the future configuration extensions through various tools. A more detailed explanation on system and configuration extensions can be found on the manpage which is listed below at [1]. System extension images may – dynamically at runtime — extend the /usr/ and /opt/ directory hierarchies with additional files. This is particularly useful on immutable system images where a /usr/ and/or /opt/ hierarchy residing on a read-only file system shall be extended temporarily at runtime without making any persistent modifications. When one or more system extension images are activated, their /usr/ and /opt/ hierarchies are combined via overlayfs with the same hierarchies of the host OS, and the host /usr/ and /opt/ overmounted with it ("merging"). When they are deactivated, the mount point is disassembled — again revealing the unmodified original host version of the hierarchy ("unmerging"). Merging thus makes the extension's resources suddenly appear below the /usr/ and /opt/ hierarchies as if they were included in the base OS image itself. Unmerging makes them disappear again, leaving in place only the files that were shipped with the base OS image itself. System configuration images are similar but operate on directories containing system or service configuration. On nearly all modern distributions mount propagation plays a crucial role and the rootfs of the OS is a shared mount in a peer group (usually with peer group id 1): TARGET SOURCE FSTYPE PROPAGATION MNT_ID PARENT_ID / / ext4 shared:1 29 1 On such systems all services and containers run in a separate mount namespace and are pivot_root()ed into their rootfs. A separate mount namespace is almost always used as it is the minimal isolation mechanism services have. But usually they are even much more isolated up to the point where they almost become indistinguishable from containers. Mount propagation again plays a crucial role here. The rootfs of all these services is a slave mount to the peer group of the host rootfs. This is done so the service will receive mount propagation events from the host when certain files or directories are updated. In addition, the rootfs of each service, container, and sandbox is also a shared mount in its separate peer group: TARGET SOURCE FSTYPE PROPAGATION MNT_ID PARENT_ID / / ext4 shared:24 master:1 71 47 For people not too familiar with mount propagation, the master:1 means that this is a slave mount to peer group 1. Which as one can see is the host rootfs as indicated by shared:1 above. The shared:24 indicates that the service rootfs is a shared mount in a separate peer group with peer group id 24. A service may run other services. Such nested services will also have a rootfs mount that is a slave to the peer group of the outer service rootfs mount. For containers things are just slighly different. A container's rootfs isn't a slave to the service's or host rootfs' peer group. The rootfs mount of a container is simply a shared mount in its own peer group: TARGET SOURCE FSTYPE PROPAGATION MNT_ID PARENT_ID /home/ubuntu/debian-tree / ext4 shared:99 61 60 So whereas services are isolated OS components a container is treated like a separate world and mount propagation into it is restricted to a single well known mount that is a slave to the peer group of the shared mount /run on the host: TARGET SOURCE FSTYPE PROPAGATION MNT_ID PARENT_ID /propagate/debian-tree /run/host/incoming tmpfs master:5 71 68 Here, the master:5 indicates that this mount is a slave to the peer group with peer group id 5. This allows to propagate mounts into the container and served as a workaround for not being able to insert mounts into mount namespaces directly. But the new mount api does support inserting mounts directly. For the interested reader the blogpost in [2] might be worth reading where I explain the old and the new approach to inserting mounts into mount namespaces. Containers of course, can themselves be run as services. They often run full systems themselves which means they again run services and containers with the exact same propagation settings explained above. The whole system is designed so that it can be easily updated, including all services in various fine-grained ways without having to enter every single service's mount namespace which would be prohibitively expensive. The mount propagation layout has been carefully chosen so it is possible to propagate updates for system extensions and configurations from the host into all services. The simplest model to update the whole system is to mount on top of /usr, /opt, or /etc on the host. The new mount on /usr, /opt, or /etc will then propagate into every service. This works cleanly the first time. However, when the system is updated multiple times it becomes necessary to unmount the first update on /opt, /usr, /etc and then propagate the new update. But this means, there's an interval where the old base system is accessible. This has to be avoided to protect against downgrade attacks. The vfs already exposes a mechanism to userspace whereby mounts can be mounted beneath an existing mount. Such mounts are internally referred to as "tucked". The patch series exposes the ability to mount beneath a top mount through the new MOVE_MOUNT_BENEATH flag for the move_mount() system call. This allows userspace to seamlessly upgrade mounts. After this series the only thing that will have changed is that mounting beneath an existing mount can be done explicitly instead of just implicitly. Today, there are two scenarios where a mount can be mounted beneath an existing mount instead of on top of it: (1) When a service or container is started in a new mount namespace and pivot_root()s into its new rootfs. The way this is done is by mounting the new rootfs beneath the old rootfs: fd_newroot = open("/var/lib/machines/fedora", ...); fd_oldroot = open("/", ...); fchdir(fd_newroot); pivot_root(".", "."); After the pivot_root(".", ".") call the new rootfs is mounted beneath the old rootfs which can then be unmounted to reveal the underlying mount: fchdir(fd_oldroot); umount2(".", MNT_DETACH); Since pivot_root() moves the caller into a new rootfs no mounts must be propagated out of the new rootfs as a consequence of the pivot_root() call. Thus, the mounts cannot be shared. (2) When a mount is propagated to a mount that already has another mount mounted on the same dentry. The easiest example for this is to create a new mount namespace. The following commands will create a mount namespace where the rootfs mount / will be a slave to the peer group of the host rootfs / mount's peer group. IOW, it will receive propagation from the host: mount --make-shared / unshare --mount --propagation=slave Now a new mount on the /mnt dentry in that mount namespace is created. (As it can be confusing it should be spelled out that the tmpfs mount on the /mnt dentry that was just created doesn't propagate back to the host because the rootfs mount / of the mount namespace isn't a peer of the host rootfs.): mount -t tmpfs tmpfs /mnt TARGET SOURCE FSTYPE PROPAGATION └─/mnt tmpfs tmpfs Now another terminal in the host mount namespace can observe that the mount indeed hasn't propagated back to into the host mount namespace. A new mount can now be created on top of the /mnt dentry with the rootfs mount / as its parent: mount --bind /opt /mnt TARGET SOURCE FSTYPE PROPAGATION └─/mnt /dev/sda2[/opt] ext4 shared:1 The mount namespace that was created earlier can now observe that the bind mount created on the host has propagated into it: TARGET SOURCE FSTYPE PROPAGATION └─/mnt /dev/sda2[/opt] ext4 master:1 └─/mnt tmpfs tmpfs But instead of having been mounted on top of the tmpfs mount at the /mnt dentry the /opt mount has been mounted on top of the rootfs mount at the /mnt dentry. And the tmpfs mount has been remounted on top of the propagated /opt mount at the /opt dentry. So in other words, the propagated mount has been mounted beneath the preexisting mount in that mount namespace. Mount namespaces make this easy to illustrate but it's also easy to mount beneath an existing mount in the same mount namespace (The following example assumes a shared rootfs mount / with peer group id 1): mount --bind /opt /opt TARGET SOURCE FSTYPE MNT_ID PARENT_ID PROPAGATION └─/opt /dev/sda2[/opt] ext4 188 29 shared:1 If another mount is mounted on top of the /opt mount at the /opt dentry: mount --bind /tmp /opt The following clunky mount tree will result: TARGET SOURCE FSTYPE MNT_ID PARENT_ID PROPAGATION └─/opt /dev/sda2[/tmp] ext4 405 29 shared:1 └─/opt /dev/sda2[/opt] ext4 188 405 shared:1 └─/opt /dev/sda2[/tmp] ext4 404 188 shared:1 The /tmp mount is mounted beneath the /opt mount and another copy is mounted on top of the /opt mount. This happens because the rootfs / and the /opt mount are shared mounts in the same peer group. When the new /tmp mount is supposed to be mounted at the /opt dentry then the /tmp mount first propagates to the root mount at the /opt dentry. But there already is the /opt mount mounted at the /opt dentry. So the old /opt mount at the /opt dentry will be mounted on top of the new /tmp mount at the /tmp dentry, i.e. @opt->mnt_parent is @tmp and @opt->mnt_mountpoint is /tmp (Note that @opt->mnt_root is /opt which is what shows up as /opt under SOURCE). So again, a mount will be mounted beneath a preexisting mount. (Fwiw, a few iterations of mount --bind /opt /opt in a loop on a shared rootfs is a good example of what could be referred to as mount explosion.) The main point is that such mounts allows userspace to umount a top mount and reveal an underlying mount. So for example, umounting the tmpfs mount on /mnt that was created in example (1) using mount namespaces reveals the /opt mount which was mounted beneath it. In (2) where a mount was mounted beneath the top mount in the same mount namespace unmounting the top mount would unmount both the top mount and the mount beneath. In the process the original mount would be remounted on top of the rootfs mount / at the /opt dentry again. This again, is a result of mount propagation only this time it's umount propagation. However, this can be avoided by simply making the parent mount / of the @opt mount a private or slave mount. Then the top mount and the original mount can be unmounted to reveal the mount beneath. These two examples are fairly arcane and are merely added to make it clear how mount propagation has effects on current and future features. More common use-cases will just be things like: mount -t btrfs /dev/sdA /mnt mount -t xfs /dev/sdB --beneath /mnt umount /mnt after which we'll have updated from a btrfs filesystem to a xfs filesystem without ever revealing the underlying mountpoint. The crux is that the proposed mechanism already exists and that it is so powerful as to cover cases where mounts are supposed to be updated with new versions. Crucially, it offers an important flexibility. Namely that updates to a system may either be forced or can be delayed and the umount of the top mount be left to a service if it is a cooperative one. This adds a new flag to move_mount() that allows to explicitly move a beneath the top mount adhering to the following semantics: * Mounts cannot be mounted beneath the rootfs. This restriction encompasses the rootfs but also chroots via chroot() and pivot_root(). To mount a mount beneath the rootfs or a chroot, pivot_root() can be used as illustrated above. * The source mount must be a private mount to force the kernel to allocate a new, unused peer group id. This isn't a required restriction but a voluntary one. It avoids repeating a semantical quirk that already exists today. If bind mounts which already have a peer group id are inserted into mount trees that have the same peer group id this can cause a lot of mount propagation events to be generated (For example, consider running mount --bind /opt /opt in a loop where the parent mount is a shared mount.). * Avoid getting rid of the top mount in the kernel. Cooperative services need to be able to unmount the top mount themselves. This also avoids a good deal of additional complexity. The umount would have to be propagated which would be another rather expensive operation. So namespace_lock() and lock_mount_hash() would potentially have to be held for a long time for both a mount and umount propagation. That should be avoided. * The path to mount beneath must be mounted and attached. * The top mount and its parent must be in the caller's mount namespace and the caller must be able to mount in that mount namespace. * The caller must be able to unmount the top mount to prove that they could reveal the underlying mount. * The propagation tree is calculated based on the destination mount's parent mount and the destination mount's mountpoint on the parent mount. Of course, if the parent of the destination mount and the destination mount are shared mounts in the same peer group and the mountpoint of the new mount to be mounted is a subdir of their ->mnt_root then both will receive a mount of /opt. That's probably easier to understand with an example. Assuming a standard shared rootfs /: mount --bind /opt /opt mount --bind /tmp /opt will cause the same mount tree as: mount --bind /opt /opt mount --beneath /tmp /opt because both / and /opt are shared mounts/peers in the same peer group and the /opt dentry is a subdirectory of both the parent's and the child's ->mnt_root. If a mount tree like that is created it almost always is an accident or abuse of mount propagation. Realistically what most people probably mean in this scenarios is: mount --bind /opt /opt mount --make-private /opt mount --make-shared /opt This forces the allocation of a new separate peer group for the /opt mount. Aferwards a mount --bind or mount --beneath actually makes sense as the / and /opt mount belong to different peer groups. Before that it's likely just confusion about what the user wanted to achieve. * Refuse MOVE_MOUNT_BENEATH if: (1) the @mnt_from has been overmounted in between path resolution and acquiring @namespace_sem when locking @mnt_to. This avoids the proliferation of shadow mounts. (2) if @to_mnt is moved to a different mountpoint while acquiring @namespace_sem to lock @to_mnt. (3) if @to_mnt is unmounted while acquiring @namespace_sem to lock @to_mnt. (4) if the parent of the target mount propagates to the target mount at the same mountpoint. This would mean mounting @mnt_from on @mnt_to->mnt_parent and then propagating a copy @c of @mnt_from onto @mnt_to. This defeats the whole purpose of mounting @mnt_from beneath @mnt_to. (5) if the parent mount @mnt_to->mnt_parent propagates to @mnt_from at the same mountpoint. If @mnt_to->mnt_parent propagates to @mnt_from this would mean propagating a copy @c of @mnt_from on top of @mnt_from. Afterwards @mnt_from would be mounted on top of @mnt_to->mnt_parent and @mnt_to would be unmounted from @mnt->mnt_parent and remounted on @mnt_from. But since @c is already mounted on @mnt_from, @mnt_to would ultimately be remounted on top of @c. Afterwards, @mnt_from would be covered by a copy @c of @mnt_from and @c would be covered by @mnt_from itself. This defeats the whole purpose of mounting @mnt_from beneath @mnt_to. Cases (1) to (3) are required as they deal with races that would cause bugs or unexpected behavior for users. Cases (4) and (5) refuse semantical quirks that would not be a bug but would cause weird mount trees to be created. While they can already be created via other means (mount --bind /opt /opt x n) there's no reason to repeat past mistakes in new features. Link: https://man7.org/linux/man-pages/man8/systemd-sysext.8.html [1] Link: https://brauner.io/2023/02/28/mounting-into-mount-namespaces.html [2] Link: https://github.com/flatcar/sysext-bakery Link: https://fedoraproject.org/wiki/Changes/Unified_Kernel_Support_Phase_1 Link: https://fedoraproject.org/wiki/Changes/Unified_Kernel_Support_Phase_2 Link: https://github.com/systemd/systemd/pull/26013 Reviewed-by: Seth Forshee (DigitalOcean) <sforshee@kernel.org> Message-Id: <20230202-fs-move-mount-replace-v4-4-98f3d80d7eaa@kernel.org> Signed-off-by: Christian Brauner <brauner@kernel.org>
2023-05-03 11:18:42 +00:00
/**
* path_overmounted - check if path is overmounted
* @path: path to check
*
* Check if path is overmounted, i.e., if there's a mount on top of
* @path->mnt with @path->dentry as mountpoint.
*
* Context: This function expects namespace_lock() to be held.
* Return: If path is overmounted true is returned, false if not.
*/
static inline bool path_overmounted(const struct path *path)
{
rcu_read_lock();
if (unlikely(__lookup_mnt(path->mnt, path->dentry))) {
rcu_read_unlock();
return true;
}
rcu_read_unlock();
return false;
}
/**
* can_move_mount_beneath - check that we can mount beneath the top mount
* @from: mount to mount beneath
* @to: mount under which to mount
* @mp: mountpoint of @to
fs: allow to mount beneath top mount Various distributions are adding or are in the process of adding support for system extensions and in the future configuration extensions through various tools. A more detailed explanation on system and configuration extensions can be found on the manpage which is listed below at [1]. System extension images may – dynamically at runtime — extend the /usr/ and /opt/ directory hierarchies with additional files. This is particularly useful on immutable system images where a /usr/ and/or /opt/ hierarchy residing on a read-only file system shall be extended temporarily at runtime without making any persistent modifications. When one or more system extension images are activated, their /usr/ and /opt/ hierarchies are combined via overlayfs with the same hierarchies of the host OS, and the host /usr/ and /opt/ overmounted with it ("merging"). When they are deactivated, the mount point is disassembled — again revealing the unmodified original host version of the hierarchy ("unmerging"). Merging thus makes the extension's resources suddenly appear below the /usr/ and /opt/ hierarchies as if they were included in the base OS image itself. Unmerging makes them disappear again, leaving in place only the files that were shipped with the base OS image itself. System configuration images are similar but operate on directories containing system or service configuration. On nearly all modern distributions mount propagation plays a crucial role and the rootfs of the OS is a shared mount in a peer group (usually with peer group id 1): TARGET SOURCE FSTYPE PROPAGATION MNT_ID PARENT_ID / / ext4 shared:1 29 1 On such systems all services and containers run in a separate mount namespace and are pivot_root()ed into their rootfs. A separate mount namespace is almost always used as it is the minimal isolation mechanism services have. But usually they are even much more isolated up to the point where they almost become indistinguishable from containers. Mount propagation again plays a crucial role here. The rootfs of all these services is a slave mount to the peer group of the host rootfs. This is done so the service will receive mount propagation events from the host when certain files or directories are updated. In addition, the rootfs of each service, container, and sandbox is also a shared mount in its separate peer group: TARGET SOURCE FSTYPE PROPAGATION MNT_ID PARENT_ID / / ext4 shared:24 master:1 71 47 For people not too familiar with mount propagation, the master:1 means that this is a slave mount to peer group 1. Which as one can see is the host rootfs as indicated by shared:1 above. The shared:24 indicates that the service rootfs is a shared mount in a separate peer group with peer group id 24. A service may run other services. Such nested services will also have a rootfs mount that is a slave to the peer group of the outer service rootfs mount. For containers things are just slighly different. A container's rootfs isn't a slave to the service's or host rootfs' peer group. The rootfs mount of a container is simply a shared mount in its own peer group: TARGET SOURCE FSTYPE PROPAGATION MNT_ID PARENT_ID /home/ubuntu/debian-tree / ext4 shared:99 61 60 So whereas services are isolated OS components a container is treated like a separate world and mount propagation into it is restricted to a single well known mount that is a slave to the peer group of the shared mount /run on the host: TARGET SOURCE FSTYPE PROPAGATION MNT_ID PARENT_ID /propagate/debian-tree /run/host/incoming tmpfs master:5 71 68 Here, the master:5 indicates that this mount is a slave to the peer group with peer group id 5. This allows to propagate mounts into the container and served as a workaround for not being able to insert mounts into mount namespaces directly. But the new mount api does support inserting mounts directly. For the interested reader the blogpost in [2] might be worth reading where I explain the old and the new approach to inserting mounts into mount namespaces. Containers of course, can themselves be run as services. They often run full systems themselves which means they again run services and containers with the exact same propagation settings explained above. The whole system is designed so that it can be easily updated, including all services in various fine-grained ways without having to enter every single service's mount namespace which would be prohibitively expensive. The mount propagation layout has been carefully chosen so it is possible to propagate updates for system extensions and configurations from the host into all services. The simplest model to update the whole system is to mount on top of /usr, /opt, or /etc on the host. The new mount on /usr, /opt, or /etc will then propagate into every service. This works cleanly the first time. However, when the system is updated multiple times it becomes necessary to unmount the first update on /opt, /usr, /etc and then propagate the new update. But this means, there's an interval where the old base system is accessible. This has to be avoided to protect against downgrade attacks. The vfs already exposes a mechanism to userspace whereby mounts can be mounted beneath an existing mount. Such mounts are internally referred to as "tucked". The patch series exposes the ability to mount beneath a top mount through the new MOVE_MOUNT_BENEATH flag for the move_mount() system call. This allows userspace to seamlessly upgrade mounts. After this series the only thing that will have changed is that mounting beneath an existing mount can be done explicitly instead of just implicitly. Today, there are two scenarios where a mount can be mounted beneath an existing mount instead of on top of it: (1) When a service or container is started in a new mount namespace and pivot_root()s into its new rootfs. The way this is done is by mounting the new rootfs beneath the old rootfs: fd_newroot = open("/var/lib/machines/fedora", ...); fd_oldroot = open("/", ...); fchdir(fd_newroot); pivot_root(".", "."); After the pivot_root(".", ".") call the new rootfs is mounted beneath the old rootfs which can then be unmounted to reveal the underlying mount: fchdir(fd_oldroot); umount2(".", MNT_DETACH); Since pivot_root() moves the caller into a new rootfs no mounts must be propagated out of the new rootfs as a consequence of the pivot_root() call. Thus, the mounts cannot be shared. (2) When a mount is propagated to a mount that already has another mount mounted on the same dentry. The easiest example for this is to create a new mount namespace. The following commands will create a mount namespace where the rootfs mount / will be a slave to the peer group of the host rootfs / mount's peer group. IOW, it will receive propagation from the host: mount --make-shared / unshare --mount --propagation=slave Now a new mount on the /mnt dentry in that mount namespace is created. (As it can be confusing it should be spelled out that the tmpfs mount on the /mnt dentry that was just created doesn't propagate back to the host because the rootfs mount / of the mount namespace isn't a peer of the host rootfs.): mount -t tmpfs tmpfs /mnt TARGET SOURCE FSTYPE PROPAGATION └─/mnt tmpfs tmpfs Now another terminal in the host mount namespace can observe that the mount indeed hasn't propagated back to into the host mount namespace. A new mount can now be created on top of the /mnt dentry with the rootfs mount / as its parent: mount --bind /opt /mnt TARGET SOURCE FSTYPE PROPAGATION └─/mnt /dev/sda2[/opt] ext4 shared:1 The mount namespace that was created earlier can now observe that the bind mount created on the host has propagated into it: TARGET SOURCE FSTYPE PROPAGATION └─/mnt /dev/sda2[/opt] ext4 master:1 └─/mnt tmpfs tmpfs But instead of having been mounted on top of the tmpfs mount at the /mnt dentry the /opt mount has been mounted on top of the rootfs mount at the /mnt dentry. And the tmpfs mount has been remounted on top of the propagated /opt mount at the /opt dentry. So in other words, the propagated mount has been mounted beneath the preexisting mount in that mount namespace. Mount namespaces make this easy to illustrate but it's also easy to mount beneath an existing mount in the same mount namespace (The following example assumes a shared rootfs mount / with peer group id 1): mount --bind /opt /opt TARGET SOURCE FSTYPE MNT_ID PARENT_ID PROPAGATION └─/opt /dev/sda2[/opt] ext4 188 29 shared:1 If another mount is mounted on top of the /opt mount at the /opt dentry: mount --bind /tmp /opt The following clunky mount tree will result: TARGET SOURCE FSTYPE MNT_ID PARENT_ID PROPAGATION └─/opt /dev/sda2[/tmp] ext4 405 29 shared:1 └─/opt /dev/sda2[/opt] ext4 188 405 shared:1 └─/opt /dev/sda2[/tmp] ext4 404 188 shared:1 The /tmp mount is mounted beneath the /opt mount and another copy is mounted on top of the /opt mount. This happens because the rootfs / and the /opt mount are shared mounts in the same peer group. When the new /tmp mount is supposed to be mounted at the /opt dentry then the /tmp mount first propagates to the root mount at the /opt dentry. But there already is the /opt mount mounted at the /opt dentry. So the old /opt mount at the /opt dentry will be mounted on top of the new /tmp mount at the /tmp dentry, i.e. @opt->mnt_parent is @tmp and @opt->mnt_mountpoint is /tmp (Note that @opt->mnt_root is /opt which is what shows up as /opt under SOURCE). So again, a mount will be mounted beneath a preexisting mount. (Fwiw, a few iterations of mount --bind /opt /opt in a loop on a shared rootfs is a good example of what could be referred to as mount explosion.) The main point is that such mounts allows userspace to umount a top mount and reveal an underlying mount. So for example, umounting the tmpfs mount on /mnt that was created in example (1) using mount namespaces reveals the /opt mount which was mounted beneath it. In (2) where a mount was mounted beneath the top mount in the same mount namespace unmounting the top mount would unmount both the top mount and the mount beneath. In the process the original mount would be remounted on top of the rootfs mount / at the /opt dentry again. This again, is a result of mount propagation only this time it's umount propagation. However, this can be avoided by simply making the parent mount / of the @opt mount a private or slave mount. Then the top mount and the original mount can be unmounted to reveal the mount beneath. These two examples are fairly arcane and are merely added to make it clear how mount propagation has effects on current and future features. More common use-cases will just be things like: mount -t btrfs /dev/sdA /mnt mount -t xfs /dev/sdB --beneath /mnt umount /mnt after which we'll have updated from a btrfs filesystem to a xfs filesystem without ever revealing the underlying mountpoint. The crux is that the proposed mechanism already exists and that it is so powerful as to cover cases where mounts are supposed to be updated with new versions. Crucially, it offers an important flexibility. Namely that updates to a system may either be forced or can be delayed and the umount of the top mount be left to a service if it is a cooperative one. This adds a new flag to move_mount() that allows to explicitly move a beneath the top mount adhering to the following semantics: * Mounts cannot be mounted beneath the rootfs. This restriction encompasses the rootfs but also chroots via chroot() and pivot_root(). To mount a mount beneath the rootfs or a chroot, pivot_root() can be used as illustrated above. * The source mount must be a private mount to force the kernel to allocate a new, unused peer group id. This isn't a required restriction but a voluntary one. It avoids repeating a semantical quirk that already exists today. If bind mounts which already have a peer group id are inserted into mount trees that have the same peer group id this can cause a lot of mount propagation events to be generated (For example, consider running mount --bind /opt /opt in a loop where the parent mount is a shared mount.). * Avoid getting rid of the top mount in the kernel. Cooperative services need to be able to unmount the top mount themselves. This also avoids a good deal of additional complexity. The umount would have to be propagated which would be another rather expensive operation. So namespace_lock() and lock_mount_hash() would potentially have to be held for a long time for both a mount and umount propagation. That should be avoided. * The path to mount beneath must be mounted and attached. * The top mount and its parent must be in the caller's mount namespace and the caller must be able to mount in that mount namespace. * The caller must be able to unmount the top mount to prove that they could reveal the underlying mount. * The propagation tree is calculated based on the destination mount's parent mount and the destination mount's mountpoint on the parent mount. Of course, if the parent of the destination mount and the destination mount are shared mounts in the same peer group and the mountpoint of the new mount to be mounted is a subdir of their ->mnt_root then both will receive a mount of /opt. That's probably easier to understand with an example. Assuming a standard shared rootfs /: mount --bind /opt /opt mount --bind /tmp /opt will cause the same mount tree as: mount --bind /opt /opt mount --beneath /tmp /opt because both / and /opt are shared mounts/peers in the same peer group and the /opt dentry is a subdirectory of both the parent's and the child's ->mnt_root. If a mount tree like that is created it almost always is an accident or abuse of mount propagation. Realistically what most people probably mean in this scenarios is: mount --bind /opt /opt mount --make-private /opt mount --make-shared /opt This forces the allocation of a new separate peer group for the /opt mount. Aferwards a mount --bind or mount --beneath actually makes sense as the / and /opt mount belong to different peer groups. Before that it's likely just confusion about what the user wanted to achieve. * Refuse MOVE_MOUNT_BENEATH if: (1) the @mnt_from has been overmounted in between path resolution and acquiring @namespace_sem when locking @mnt_to. This avoids the proliferation of shadow mounts. (2) if @to_mnt is moved to a different mountpoint while acquiring @namespace_sem to lock @to_mnt. (3) if @to_mnt is unmounted while acquiring @namespace_sem to lock @to_mnt. (4) if the parent of the target mount propagates to the target mount at the same mountpoint. This would mean mounting @mnt_from on @mnt_to->mnt_parent and then propagating a copy @c of @mnt_from onto @mnt_to. This defeats the whole purpose of mounting @mnt_from beneath @mnt_to. (5) if the parent mount @mnt_to->mnt_parent propagates to @mnt_from at the same mountpoint. If @mnt_to->mnt_parent propagates to @mnt_from this would mean propagating a copy @c of @mnt_from on top of @mnt_from. Afterwards @mnt_from would be mounted on top of @mnt_to->mnt_parent and @mnt_to would be unmounted from @mnt->mnt_parent and remounted on @mnt_from. But since @c is already mounted on @mnt_from, @mnt_to would ultimately be remounted on top of @c. Afterwards, @mnt_from would be covered by a copy @c of @mnt_from and @c would be covered by @mnt_from itself. This defeats the whole purpose of mounting @mnt_from beneath @mnt_to. Cases (1) to (3) are required as they deal with races that would cause bugs or unexpected behavior for users. Cases (4) and (5) refuse semantical quirks that would not be a bug but would cause weird mount trees to be created. While they can already be created via other means (mount --bind /opt /opt x n) there's no reason to repeat past mistakes in new features. Link: https://man7.org/linux/man-pages/man8/systemd-sysext.8.html [1] Link: https://brauner.io/2023/02/28/mounting-into-mount-namespaces.html [2] Link: https://github.com/flatcar/sysext-bakery Link: https://fedoraproject.org/wiki/Changes/Unified_Kernel_Support_Phase_1 Link: https://fedoraproject.org/wiki/Changes/Unified_Kernel_Support_Phase_2 Link: https://github.com/systemd/systemd/pull/26013 Reviewed-by: Seth Forshee (DigitalOcean) <sforshee@kernel.org> Message-Id: <20230202-fs-move-mount-replace-v4-4-98f3d80d7eaa@kernel.org> Signed-off-by: Christian Brauner <brauner@kernel.org>
2023-05-03 11:18:42 +00:00
*
* - Make sure that @to->dentry is actually the root of a mount under
* which we can mount another mount.
* - Make sure that nothing can be mounted beneath the caller's current
* root or the rootfs of the namespace.
* - Make sure that the caller can unmount the topmost mount ensuring
* that the caller could reveal the underlying mountpoint.
* - Ensure that nothing has been mounted on top of @from before we
* grabbed @namespace_sem to avoid creating pointless shadow mounts.
* - Prevent mounting beneath a mount if the propagation relationship
* between the source mount, parent mount, and top mount would lead to
* nonsensical mount trees.
*
* Context: This function expects namespace_lock() to be held.
* Return: On success 0, and on error a negative error code is returned.
*/
static int can_move_mount_beneath(const struct path *from,
const struct path *to,
const struct mountpoint *mp)
{
struct mount *mnt_from = real_mount(from->mnt),
*mnt_to = real_mount(to->mnt),
*parent_mnt_to = mnt_to->mnt_parent;
if (!mnt_has_parent(mnt_to))
return -EINVAL;
if (!path_mounted(to))
return -EINVAL;
if (IS_MNT_LOCKED(mnt_to))
return -EINVAL;
/* Avoid creating shadow mounts during mount propagation. */
if (path_overmounted(from))
return -EINVAL;
/*
* Mounting beneath the rootfs only makes sense when the
* semantics of pivot_root(".", ".") are used.
*/
if (&mnt_to->mnt == current->fs->root.mnt)
return -EINVAL;
if (parent_mnt_to == current->nsproxy->mnt_ns->root)
return -EINVAL;
for (struct mount *p = mnt_from; mnt_has_parent(p); p = p->mnt_parent)
if (p == mnt_to)
return -EINVAL;
/*
* If the parent mount propagates to the child mount this would
* mean mounting @mnt_from on @mnt_to->mnt_parent and then
* propagating a copy @c of @mnt_from on top of @mnt_to. This
* defeats the whole purpose of mounting beneath another mount.
*/
if (propagation_would_overmount(parent_mnt_to, mnt_to, mp))
return -EINVAL;
/*
* If @mnt_to->mnt_parent propagates to @mnt_from this would
* mean propagating a copy @c of @mnt_from on top of @mnt_from.
* Afterwards @mnt_from would be mounted on top of
* @mnt_to->mnt_parent and @mnt_to would be unmounted from
* @mnt->mnt_parent and remounted on @mnt_from. But since @c is
* already mounted on @mnt_from, @mnt_to would ultimately be
* remounted on top of @c. Afterwards, @mnt_from would be
* covered by a copy @c of @mnt_from and @c would be covered by
* @mnt_from itself. This defeats the whole purpose of mounting
* @mnt_from beneath @mnt_to.
*/
if (propagation_would_overmount(parent_mnt_to, mnt_from, mp))
return -EINVAL;
return 0;
}
static int do_move_mount(struct path *old_path, struct path *new_path,
bool beneath)
{
struct mnt_namespace *ns;
struct mount *p;
struct mount *old;
struct mount *parent;
struct mountpoint *mp, *old_mp;
int err;
bool attached;
fs: allow to mount beneath top mount Various distributions are adding or are in the process of adding support for system extensions and in the future configuration extensions through various tools. A more detailed explanation on system and configuration extensions can be found on the manpage which is listed below at [1]. System extension images may – dynamically at runtime — extend the /usr/ and /opt/ directory hierarchies with additional files. This is particularly useful on immutable system images where a /usr/ and/or /opt/ hierarchy residing on a read-only file system shall be extended temporarily at runtime without making any persistent modifications. When one or more system extension images are activated, their /usr/ and /opt/ hierarchies are combined via overlayfs with the same hierarchies of the host OS, and the host /usr/ and /opt/ overmounted with it ("merging"). When they are deactivated, the mount point is disassembled — again revealing the unmodified original host version of the hierarchy ("unmerging"). Merging thus makes the extension's resources suddenly appear below the /usr/ and /opt/ hierarchies as if they were included in the base OS image itself. Unmerging makes them disappear again, leaving in place only the files that were shipped with the base OS image itself. System configuration images are similar but operate on directories containing system or service configuration. On nearly all modern distributions mount propagation plays a crucial role and the rootfs of the OS is a shared mount in a peer group (usually with peer group id 1): TARGET SOURCE FSTYPE PROPAGATION MNT_ID PARENT_ID / / ext4 shared:1 29 1 On such systems all services and containers run in a separate mount namespace and are pivot_root()ed into their rootfs. A separate mount namespace is almost always used as it is the minimal isolation mechanism services have. But usually they are even much more isolated up to the point where they almost become indistinguishable from containers. Mount propagation again plays a crucial role here. The rootfs of all these services is a slave mount to the peer group of the host rootfs. This is done so the service will receive mount propagation events from the host when certain files or directories are updated. In addition, the rootfs of each service, container, and sandbox is also a shared mount in its separate peer group: TARGET SOURCE FSTYPE PROPAGATION MNT_ID PARENT_ID / / ext4 shared:24 master:1 71 47 For people not too familiar with mount propagation, the master:1 means that this is a slave mount to peer group 1. Which as one can see is the host rootfs as indicated by shared:1 above. The shared:24 indicates that the service rootfs is a shared mount in a separate peer group with peer group id 24. A service may run other services. Such nested services will also have a rootfs mount that is a slave to the peer group of the outer service rootfs mount. For containers things are just slighly different. A container's rootfs isn't a slave to the service's or host rootfs' peer group. The rootfs mount of a container is simply a shared mount in its own peer group: TARGET SOURCE FSTYPE PROPAGATION MNT_ID PARENT_ID /home/ubuntu/debian-tree / ext4 shared:99 61 60 So whereas services are isolated OS components a container is treated like a separate world and mount propagation into it is restricted to a single well known mount that is a slave to the peer group of the shared mount /run on the host: TARGET SOURCE FSTYPE PROPAGATION MNT_ID PARENT_ID /propagate/debian-tree /run/host/incoming tmpfs master:5 71 68 Here, the master:5 indicates that this mount is a slave to the peer group with peer group id 5. This allows to propagate mounts into the container and served as a workaround for not being able to insert mounts into mount namespaces directly. But the new mount api does support inserting mounts directly. For the interested reader the blogpost in [2] might be worth reading where I explain the old and the new approach to inserting mounts into mount namespaces. Containers of course, can themselves be run as services. They often run full systems themselves which means they again run services and containers with the exact same propagation settings explained above. The whole system is designed so that it can be easily updated, including all services in various fine-grained ways without having to enter every single service's mount namespace which would be prohibitively expensive. The mount propagation layout has been carefully chosen so it is possible to propagate updates for system extensions and configurations from the host into all services. The simplest model to update the whole system is to mount on top of /usr, /opt, or /etc on the host. The new mount on /usr, /opt, or /etc will then propagate into every service. This works cleanly the first time. However, when the system is updated multiple times it becomes necessary to unmount the first update on /opt, /usr, /etc and then propagate the new update. But this means, there's an interval where the old base system is accessible. This has to be avoided to protect against downgrade attacks. The vfs already exposes a mechanism to userspace whereby mounts can be mounted beneath an existing mount. Such mounts are internally referred to as "tucked". The patch series exposes the ability to mount beneath a top mount through the new MOVE_MOUNT_BENEATH flag for the move_mount() system call. This allows userspace to seamlessly upgrade mounts. After this series the only thing that will have changed is that mounting beneath an existing mount can be done explicitly instead of just implicitly. Today, there are two scenarios where a mount can be mounted beneath an existing mount instead of on top of it: (1) When a service or container is started in a new mount namespace and pivot_root()s into its new rootfs. The way this is done is by mounting the new rootfs beneath the old rootfs: fd_newroot = open("/var/lib/machines/fedora", ...); fd_oldroot = open("/", ...); fchdir(fd_newroot); pivot_root(".", "."); After the pivot_root(".", ".") call the new rootfs is mounted beneath the old rootfs which can then be unmounted to reveal the underlying mount: fchdir(fd_oldroot); umount2(".", MNT_DETACH); Since pivot_root() moves the caller into a new rootfs no mounts must be propagated out of the new rootfs as a consequence of the pivot_root() call. Thus, the mounts cannot be shared. (2) When a mount is propagated to a mount that already has another mount mounted on the same dentry. The easiest example for this is to create a new mount namespace. The following commands will create a mount namespace where the rootfs mount / will be a slave to the peer group of the host rootfs / mount's peer group. IOW, it will receive propagation from the host: mount --make-shared / unshare --mount --propagation=slave Now a new mount on the /mnt dentry in that mount namespace is created. (As it can be confusing it should be spelled out that the tmpfs mount on the /mnt dentry that was just created doesn't propagate back to the host because the rootfs mount / of the mount namespace isn't a peer of the host rootfs.): mount -t tmpfs tmpfs /mnt TARGET SOURCE FSTYPE PROPAGATION └─/mnt tmpfs tmpfs Now another terminal in the host mount namespace can observe that the mount indeed hasn't propagated back to into the host mount namespace. A new mount can now be created on top of the /mnt dentry with the rootfs mount / as its parent: mount --bind /opt /mnt TARGET SOURCE FSTYPE PROPAGATION └─/mnt /dev/sda2[/opt] ext4 shared:1 The mount namespace that was created earlier can now observe that the bind mount created on the host has propagated into it: TARGET SOURCE FSTYPE PROPAGATION └─/mnt /dev/sda2[/opt] ext4 master:1 └─/mnt tmpfs tmpfs But instead of having been mounted on top of the tmpfs mount at the /mnt dentry the /opt mount has been mounted on top of the rootfs mount at the /mnt dentry. And the tmpfs mount has been remounted on top of the propagated /opt mount at the /opt dentry. So in other words, the propagated mount has been mounted beneath the preexisting mount in that mount namespace. Mount namespaces make this easy to illustrate but it's also easy to mount beneath an existing mount in the same mount namespace (The following example assumes a shared rootfs mount / with peer group id 1): mount --bind /opt /opt TARGET SOURCE FSTYPE MNT_ID PARENT_ID PROPAGATION └─/opt /dev/sda2[/opt] ext4 188 29 shared:1 If another mount is mounted on top of the /opt mount at the /opt dentry: mount --bind /tmp /opt The following clunky mount tree will result: TARGET SOURCE FSTYPE MNT_ID PARENT_ID PROPAGATION └─/opt /dev/sda2[/tmp] ext4 405 29 shared:1 └─/opt /dev/sda2[/opt] ext4 188 405 shared:1 └─/opt /dev/sda2[/tmp] ext4 404 188 shared:1 The /tmp mount is mounted beneath the /opt mount and another copy is mounted on top of the /opt mount. This happens because the rootfs / and the /opt mount are shared mounts in the same peer group. When the new /tmp mount is supposed to be mounted at the /opt dentry then the /tmp mount first propagates to the root mount at the /opt dentry. But there already is the /opt mount mounted at the /opt dentry. So the old /opt mount at the /opt dentry will be mounted on top of the new /tmp mount at the /tmp dentry, i.e. @opt->mnt_parent is @tmp and @opt->mnt_mountpoint is /tmp (Note that @opt->mnt_root is /opt which is what shows up as /opt under SOURCE). So again, a mount will be mounted beneath a preexisting mount. (Fwiw, a few iterations of mount --bind /opt /opt in a loop on a shared rootfs is a good example of what could be referred to as mount explosion.) The main point is that such mounts allows userspace to umount a top mount and reveal an underlying mount. So for example, umounting the tmpfs mount on /mnt that was created in example (1) using mount namespaces reveals the /opt mount which was mounted beneath it. In (2) where a mount was mounted beneath the top mount in the same mount namespace unmounting the top mount would unmount both the top mount and the mount beneath. In the process the original mount would be remounted on top of the rootfs mount / at the /opt dentry again. This again, is a result of mount propagation only this time it's umount propagation. However, this can be avoided by simply making the parent mount / of the @opt mount a private or slave mount. Then the top mount and the original mount can be unmounted to reveal the mount beneath. These two examples are fairly arcane and are merely added to make it clear how mount propagation has effects on current and future features. More common use-cases will just be things like: mount -t btrfs /dev/sdA /mnt mount -t xfs /dev/sdB --beneath /mnt umount /mnt after which we'll have updated from a btrfs filesystem to a xfs filesystem without ever revealing the underlying mountpoint. The crux is that the proposed mechanism already exists and that it is so powerful as to cover cases where mounts are supposed to be updated with new versions. Crucially, it offers an important flexibility. Namely that updates to a system may either be forced or can be delayed and the umount of the top mount be left to a service if it is a cooperative one. This adds a new flag to move_mount() that allows to explicitly move a beneath the top mount adhering to the following semantics: * Mounts cannot be mounted beneath the rootfs. This restriction encompasses the rootfs but also chroots via chroot() and pivot_root(). To mount a mount beneath the rootfs or a chroot, pivot_root() can be used as illustrated above. * The source mount must be a private mount to force the kernel to allocate a new, unused peer group id. This isn't a required restriction but a voluntary one. It avoids repeating a semantical quirk that already exists today. If bind mounts which already have a peer group id are inserted into mount trees that have the same peer group id this can cause a lot of mount propagation events to be generated (For example, consider running mount --bind /opt /opt in a loop where the parent mount is a shared mount.). * Avoid getting rid of the top mount in the kernel. Cooperative services need to be able to unmount the top mount themselves. This also avoids a good deal of additional complexity. The umount would have to be propagated which would be another rather expensive operation. So namespace_lock() and lock_mount_hash() would potentially have to be held for a long time for both a mount and umount propagation. That should be avoided. * The path to mount beneath must be mounted and attached. * The top mount and its parent must be in the caller's mount namespace and the caller must be able to mount in that mount namespace. * The caller must be able to unmount the top mount to prove that they could reveal the underlying mount. * The propagation tree is calculated based on the destination mount's parent mount and the destination mount's mountpoint on the parent mount. Of course, if the parent of the destination mount and the destination mount are shared mounts in the same peer group and the mountpoint of the new mount to be mounted is a subdir of their ->mnt_root then both will receive a mount of /opt. That's probably easier to understand with an example. Assuming a standard shared rootfs /: mount --bind /opt /opt mount --bind /tmp /opt will cause the same mount tree as: mount --bind /opt /opt mount --beneath /tmp /opt because both / and /opt are shared mounts/peers in the same peer group and the /opt dentry is a subdirectory of both the parent's and the child's ->mnt_root. If a mount tree like that is created it almost always is an accident or abuse of mount propagation. Realistically what most people probably mean in this scenarios is: mount --bind /opt /opt mount --make-private /opt mount --make-shared /opt This forces the allocation of a new separate peer group for the /opt mount. Aferwards a mount --bind or mount --beneath actually makes sense as the / and /opt mount belong to different peer groups. Before that it's likely just confusion about what the user wanted to achieve. * Refuse MOVE_MOUNT_BENEATH if: (1) the @mnt_from has been overmounted in between path resolution and acquiring @namespace_sem when locking @mnt_to. This avoids the proliferation of shadow mounts. (2) if @to_mnt is moved to a different mountpoint while acquiring @namespace_sem to lock @to_mnt. (3) if @to_mnt is unmounted while acquiring @namespace_sem to lock @to_mnt. (4) if the parent of the target mount propagates to the target mount at the same mountpoint. This would mean mounting @mnt_from on @mnt_to->mnt_parent and then propagating a copy @c of @mnt_from onto @mnt_to. This defeats the whole purpose of mounting @mnt_from beneath @mnt_to. (5) if the parent mount @mnt_to->mnt_parent propagates to @mnt_from at the same mountpoint. If @mnt_to->mnt_parent propagates to @mnt_from this would mean propagating a copy @c of @mnt_from on top of @mnt_from. Afterwards @mnt_from would be mounted on top of @mnt_to->mnt_parent and @mnt_to would be unmounted from @mnt->mnt_parent and remounted on @mnt_from. But since @c is already mounted on @mnt_from, @mnt_to would ultimately be remounted on top of @c. Afterwards, @mnt_from would be covered by a copy @c of @mnt_from and @c would be covered by @mnt_from itself. This defeats the whole purpose of mounting @mnt_from beneath @mnt_to. Cases (1) to (3) are required as they deal with races that would cause bugs or unexpected behavior for users. Cases (4) and (5) refuse semantical quirks that would not be a bug but would cause weird mount trees to be created. While they can already be created via other means (mount --bind /opt /opt x n) there's no reason to repeat past mistakes in new features. Link: https://man7.org/linux/man-pages/man8/systemd-sysext.8.html [1] Link: https://brauner.io/2023/02/28/mounting-into-mount-namespaces.html [2] Link: https://github.com/flatcar/sysext-bakery Link: https://fedoraproject.org/wiki/Changes/Unified_Kernel_Support_Phase_1 Link: https://fedoraproject.org/wiki/Changes/Unified_Kernel_Support_Phase_2 Link: https://github.com/systemd/systemd/pull/26013 Reviewed-by: Seth Forshee (DigitalOcean) <sforshee@kernel.org> Message-Id: <20230202-fs-move-mount-replace-v4-4-98f3d80d7eaa@kernel.org> Signed-off-by: Christian Brauner <brauner@kernel.org>
2023-05-03 11:18:42 +00:00
enum mnt_tree_flags_t flags = 0;
fs: allow to mount beneath top mount Various distributions are adding or are in the process of adding support for system extensions and in the future configuration extensions through various tools. A more detailed explanation on system and configuration extensions can be found on the manpage which is listed below at [1]. System extension images may – dynamically at runtime — extend the /usr/ and /opt/ directory hierarchies with additional files. This is particularly useful on immutable system images where a /usr/ and/or /opt/ hierarchy residing on a read-only file system shall be extended temporarily at runtime without making any persistent modifications. When one or more system extension images are activated, their /usr/ and /opt/ hierarchies are combined via overlayfs with the same hierarchies of the host OS, and the host /usr/ and /opt/ overmounted with it ("merging"). When they are deactivated, the mount point is disassembled — again revealing the unmodified original host version of the hierarchy ("unmerging"). Merging thus makes the extension's resources suddenly appear below the /usr/ and /opt/ hierarchies as if they were included in the base OS image itself. Unmerging makes them disappear again, leaving in place only the files that were shipped with the base OS image itself. System configuration images are similar but operate on directories containing system or service configuration. On nearly all modern distributions mount propagation plays a crucial role and the rootfs of the OS is a shared mount in a peer group (usually with peer group id 1): TARGET SOURCE FSTYPE PROPAGATION MNT_ID PARENT_ID / / ext4 shared:1 29 1 On such systems all services and containers run in a separate mount namespace and are pivot_root()ed into their rootfs. A separate mount namespace is almost always used as it is the minimal isolation mechanism services have. But usually they are even much more isolated up to the point where they almost become indistinguishable from containers. Mount propagation again plays a crucial role here. The rootfs of all these services is a slave mount to the peer group of the host rootfs. This is done so the service will receive mount propagation events from the host when certain files or directories are updated. In addition, the rootfs of each service, container, and sandbox is also a shared mount in its separate peer group: TARGET SOURCE FSTYPE PROPAGATION MNT_ID PARENT_ID / / ext4 shared:24 master:1 71 47 For people not too familiar with mount propagation, the master:1 means that this is a slave mount to peer group 1. Which as one can see is the host rootfs as indicated by shared:1 above. The shared:24 indicates that the service rootfs is a shared mount in a separate peer group with peer group id 24. A service may run other services. Such nested services will also have a rootfs mount that is a slave to the peer group of the outer service rootfs mount. For containers things are just slighly different. A container's rootfs isn't a slave to the service's or host rootfs' peer group. The rootfs mount of a container is simply a shared mount in its own peer group: TARGET SOURCE FSTYPE PROPAGATION MNT_ID PARENT_ID /home/ubuntu/debian-tree / ext4 shared:99 61 60 So whereas services are isolated OS components a container is treated like a separate world and mount propagation into it is restricted to a single well known mount that is a slave to the peer group of the shared mount /run on the host: TARGET SOURCE FSTYPE PROPAGATION MNT_ID PARENT_ID /propagate/debian-tree /run/host/incoming tmpfs master:5 71 68 Here, the master:5 indicates that this mount is a slave to the peer group with peer group id 5. This allows to propagate mounts into the container and served as a workaround for not being able to insert mounts into mount namespaces directly. But the new mount api does support inserting mounts directly. For the interested reader the blogpost in [2] might be worth reading where I explain the old and the new approach to inserting mounts into mount namespaces. Containers of course, can themselves be run as services. They often run full systems themselves which means they again run services and containers with the exact same propagation settings explained above. The whole system is designed so that it can be easily updated, including all services in various fine-grained ways without having to enter every single service's mount namespace which would be prohibitively expensive. The mount propagation layout has been carefully chosen so it is possible to propagate updates for system extensions and configurations from the host into all services. The simplest model to update the whole system is to mount on top of /usr, /opt, or /etc on the host. The new mount on /usr, /opt, or /etc will then propagate into every service. This works cleanly the first time. However, when the system is updated multiple times it becomes necessary to unmount the first update on /opt, /usr, /etc and then propagate the new update. But this means, there's an interval where the old base system is accessible. This has to be avoided to protect against downgrade attacks. The vfs already exposes a mechanism to userspace whereby mounts can be mounted beneath an existing mount. Such mounts are internally referred to as "tucked". The patch series exposes the ability to mount beneath a top mount through the new MOVE_MOUNT_BENEATH flag for the move_mount() system call. This allows userspace to seamlessly upgrade mounts. After this series the only thing that will have changed is that mounting beneath an existing mount can be done explicitly instead of just implicitly. Today, there are two scenarios where a mount can be mounted beneath an existing mount instead of on top of it: (1) When a service or container is started in a new mount namespace and pivot_root()s into its new rootfs. The way this is done is by mounting the new rootfs beneath the old rootfs: fd_newroot = open("/var/lib/machines/fedora", ...); fd_oldroot = open("/", ...); fchdir(fd_newroot); pivot_root(".", "."); After the pivot_root(".", ".") call the new rootfs is mounted beneath the old rootfs which can then be unmounted to reveal the underlying mount: fchdir(fd_oldroot); umount2(".", MNT_DETACH); Since pivot_root() moves the caller into a new rootfs no mounts must be propagated out of the new rootfs as a consequence of the pivot_root() call. Thus, the mounts cannot be shared. (2) When a mount is propagated to a mount that already has another mount mounted on the same dentry. The easiest example for this is to create a new mount namespace. The following commands will create a mount namespace where the rootfs mount / will be a slave to the peer group of the host rootfs / mount's peer group. IOW, it will receive propagation from the host: mount --make-shared / unshare --mount --propagation=slave Now a new mount on the /mnt dentry in that mount namespace is created. (As it can be confusing it should be spelled out that the tmpfs mount on the /mnt dentry that was just created doesn't propagate back to the host because the rootfs mount / of the mount namespace isn't a peer of the host rootfs.): mount -t tmpfs tmpfs /mnt TARGET SOURCE FSTYPE PROPAGATION └─/mnt tmpfs tmpfs Now another terminal in the host mount namespace can observe that the mount indeed hasn't propagated back to into the host mount namespace. A new mount can now be created on top of the /mnt dentry with the rootfs mount / as its parent: mount --bind /opt /mnt TARGET SOURCE FSTYPE PROPAGATION └─/mnt /dev/sda2[/opt] ext4 shared:1 The mount namespace that was created earlier can now observe that the bind mount created on the host has propagated into it: TARGET SOURCE FSTYPE PROPAGATION └─/mnt /dev/sda2[/opt] ext4 master:1 └─/mnt tmpfs tmpfs But instead of having been mounted on top of the tmpfs mount at the /mnt dentry the /opt mount has been mounted on top of the rootfs mount at the /mnt dentry. And the tmpfs mount has been remounted on top of the propagated /opt mount at the /opt dentry. So in other words, the propagated mount has been mounted beneath the preexisting mount in that mount namespace. Mount namespaces make this easy to illustrate but it's also easy to mount beneath an existing mount in the same mount namespace (The following example assumes a shared rootfs mount / with peer group id 1): mount --bind /opt /opt TARGET SOURCE FSTYPE MNT_ID PARENT_ID PROPAGATION └─/opt /dev/sda2[/opt] ext4 188 29 shared:1 If another mount is mounted on top of the /opt mount at the /opt dentry: mount --bind /tmp /opt The following clunky mount tree will result: TARGET SOURCE FSTYPE MNT_ID PARENT_ID PROPAGATION └─/opt /dev/sda2[/tmp] ext4 405 29 shared:1 └─/opt /dev/sda2[/opt] ext4 188 405 shared:1 └─/opt /dev/sda2[/tmp] ext4 404 188 shared:1 The /tmp mount is mounted beneath the /opt mount and another copy is mounted on top of the /opt mount. This happens because the rootfs / and the /opt mount are shared mounts in the same peer group. When the new /tmp mount is supposed to be mounted at the /opt dentry then the /tmp mount first propagates to the root mount at the /opt dentry. But there already is the /opt mount mounted at the /opt dentry. So the old /opt mount at the /opt dentry will be mounted on top of the new /tmp mount at the /tmp dentry, i.e. @opt->mnt_parent is @tmp and @opt->mnt_mountpoint is /tmp (Note that @opt->mnt_root is /opt which is what shows up as /opt under SOURCE). So again, a mount will be mounted beneath a preexisting mount. (Fwiw, a few iterations of mount --bind /opt /opt in a loop on a shared rootfs is a good example of what could be referred to as mount explosion.) The main point is that such mounts allows userspace to umount a top mount and reveal an underlying mount. So for example, umounting the tmpfs mount on /mnt that was created in example (1) using mount namespaces reveals the /opt mount which was mounted beneath it. In (2) where a mount was mounted beneath the top mount in the same mount namespace unmounting the top mount would unmount both the top mount and the mount beneath. In the process the original mount would be remounted on top of the rootfs mount / at the /opt dentry again. This again, is a result of mount propagation only this time it's umount propagation. However, this can be avoided by simply making the parent mount / of the @opt mount a private or slave mount. Then the top mount and the original mount can be unmounted to reveal the mount beneath. These two examples are fairly arcane and are merely added to make it clear how mount propagation has effects on current and future features. More common use-cases will just be things like: mount -t btrfs /dev/sdA /mnt mount -t xfs /dev/sdB --beneath /mnt umount /mnt after which we'll have updated from a btrfs filesystem to a xfs filesystem without ever revealing the underlying mountpoint. The crux is that the proposed mechanism already exists and that it is so powerful as to cover cases where mounts are supposed to be updated with new versions. Crucially, it offers an important flexibility. Namely that updates to a system may either be forced or can be delayed and the umount of the top mount be left to a service if it is a cooperative one. This adds a new flag to move_mount() that allows to explicitly move a beneath the top mount adhering to the following semantics: * Mounts cannot be mounted beneath the rootfs. This restriction encompasses the rootfs but also chroots via chroot() and pivot_root(). To mount a mount beneath the rootfs or a chroot, pivot_root() can be used as illustrated above. * The source mount must be a private mount to force the kernel to allocate a new, unused peer group id. This isn't a required restriction but a voluntary one. It avoids repeating a semantical quirk that already exists today. If bind mounts which already have a peer group id are inserted into mount trees that have the same peer group id this can cause a lot of mount propagation events to be generated (For example, consider running mount --bind /opt /opt in a loop where the parent mount is a shared mount.). * Avoid getting rid of the top mount in the kernel. Cooperative services need to be able to unmount the top mount themselves. This also avoids a good deal of additional complexity. The umount would have to be propagated which would be another rather expensive operation. So namespace_lock() and lock_mount_hash() would potentially have to be held for a long time for both a mount and umount propagation. That should be avoided. * The path to mount beneath must be mounted and attached. * The top mount and its parent must be in the caller's mount namespace and the caller must be able to mount in that mount namespace. * The caller must be able to unmount the top mount to prove that they could reveal the underlying mount. * The propagation tree is calculated based on the destination mount's parent mount and the destination mount's mountpoint on the parent mount. Of course, if the parent of the destination mount and the destination mount are shared mounts in the same peer group and the mountpoint of the new mount to be mounted is a subdir of their ->mnt_root then both will receive a mount of /opt. That's probably easier to understand with an example. Assuming a standard shared rootfs /: mount --bind /opt /opt mount --bind /tmp /opt will cause the same mount tree as: mount --bind /opt /opt mount --beneath /tmp /opt because both / and /opt are shared mounts/peers in the same peer group and the /opt dentry is a subdirectory of both the parent's and the child's ->mnt_root. If a mount tree like that is created it almost always is an accident or abuse of mount propagation. Realistically what most people probably mean in this scenarios is: mount --bind /opt /opt mount --make-private /opt mount --make-shared /opt This forces the allocation of a new separate peer group for the /opt mount. Aferwards a mount --bind or mount --beneath actually makes sense as the / and /opt mount belong to different peer groups. Before that it's likely just confusion about what the user wanted to achieve. * Refuse MOVE_MOUNT_BENEATH if: (1) the @mnt_from has been overmounted in between path resolution and acquiring @namespace_sem when locking @mnt_to. This avoids the proliferation of shadow mounts. (2) if @to_mnt is moved to a different mountpoint while acquiring @namespace_sem to lock @to_mnt. (3) if @to_mnt is unmounted while acquiring @namespace_sem to lock @to_mnt. (4) if the parent of the target mount propagates to the target mount at the same mountpoint. This would mean mounting @mnt_from on @mnt_to->mnt_parent and then propagating a copy @c of @mnt_from onto @mnt_to. This defeats the whole purpose of mounting @mnt_from beneath @mnt_to. (5) if the parent mount @mnt_to->mnt_parent propagates to @mnt_from at the same mountpoint. If @mnt_to->mnt_parent propagates to @mnt_from this would mean propagating a copy @c of @mnt_from on top of @mnt_from. Afterwards @mnt_from would be mounted on top of @mnt_to->mnt_parent and @mnt_to would be unmounted from @mnt->mnt_parent and remounted on @mnt_from. But since @c is already mounted on @mnt_from, @mnt_to would ultimately be remounted on top of @c. Afterwards, @mnt_from would be covered by a copy @c of @mnt_from and @c would be covered by @mnt_from itself. This defeats the whole purpose of mounting @mnt_from beneath @mnt_to. Cases (1) to (3) are required as they deal with races that would cause bugs or unexpected behavior for users. Cases (4) and (5) refuse semantical quirks that would not be a bug but would cause weird mount trees to be created. While they can already be created via other means (mount --bind /opt /opt x n) there's no reason to repeat past mistakes in new features. Link: https://man7.org/linux/man-pages/man8/systemd-sysext.8.html [1] Link: https://brauner.io/2023/02/28/mounting-into-mount-namespaces.html [2] Link: https://github.com/flatcar/sysext-bakery Link: https://fedoraproject.org/wiki/Changes/Unified_Kernel_Support_Phase_1 Link: https://fedoraproject.org/wiki/Changes/Unified_Kernel_Support_Phase_2 Link: https://github.com/systemd/systemd/pull/26013 Reviewed-by: Seth Forshee (DigitalOcean) <sforshee@kernel.org> Message-Id: <20230202-fs-move-mount-replace-v4-4-98f3d80d7eaa@kernel.org> Signed-off-by: Christian Brauner <brauner@kernel.org>
2023-05-03 11:18:42 +00:00
mp = do_lock_mount(new_path, beneath);
if (IS_ERR(mp))
return PTR_ERR(mp);
Add a dentry op to allow processes to be held during pathwalk transit Add a dentry op (d_manage) to permit a filesystem to hold a process and make it sleep when it tries to transit away from one of that filesystem's directories during a pathwalk. The operation is keyed off a new dentry flag (DCACHE_MANAGE_TRANSIT). The filesystem is allowed to be selective about which processes it holds and which it permits to continue on or prohibits from transiting from each flagged directory. This will allow autofs to hold up client processes whilst letting its userspace daemon through to maintain the directory or the stuff behind it or mounted upon it. The ->d_manage() dentry operation: int (*d_manage)(struct path *path, bool mounting_here); takes a pointer to the directory about to be transited away from and a flag indicating whether the transit is undertaken by do_add_mount() or do_move_mount() skipping through a pile of filesystems mounted on a mountpoint. It should return 0 if successful and to let the process continue on its way; -EISDIR to prohibit the caller from skipping to overmounted filesystems or automounting, and to use this directory; or some other error code to return to the user. ->d_manage() is called with namespace_sem writelocked if mounting_here is true and no other locks held, so it may sleep. However, if mounting_here is true, it may not initiate or wait for a mount or unmount upon the parameter directory, even if the act is actually performed by userspace. Within fs/namei.c, follow_managed() is extended to check with d_manage() first on each managed directory, before transiting away from it or attempting to automount upon it. follow_down() is renamed follow_down_one() and should only be used where the filesystem deliberately intends to avoid management steps (e.g. autofs). A new follow_down() is added that incorporates the loop done by all other callers of follow_down() (do_add/move_mount(), autofs and NFSD; whilst AFS, NFS and CIFS do use it, their use is removed by converting them to use d_automount()). The new follow_down() calls d_manage() as appropriate. It also takes an extra parameter to indicate if it is being called from mount code (with namespace_sem writelocked) which it passes to d_manage(). follow_down() ignores automount points so that it can be used to mount on them. __follow_mount_rcu() is made to abort rcu-walk mode if it hits a directory with DCACHE_MANAGE_TRANSIT set on the basis that we're probably going to have to sleep. It would be possible to enter d_manage() in rcu-walk mode too, and have that determine whether to abort or not itself. That would allow the autofs daemon to continue on in rcu-walk mode. Note that DCACHE_MANAGE_TRANSIT on a directory should be cleared when it isn't required as every tranist from that directory will cause d_manage() to be invoked. It can always be set again when necessary. ========================== WHAT THIS MEANS FOR AUTOFS ========================== Autofs currently uses the lookup() inode op and the d_revalidate() dentry op to trigger the automounting of indirect mounts, and both of these can be called with i_mutex held. autofs knows that the i_mutex will be held by the caller in lookup(), and so can drop it before invoking the daemon - but this isn't so for d_revalidate(), since the lock is only held on _some_ of the code paths that call it. This means that autofs can't risk dropping i_mutex from its d_revalidate() function before it calls the daemon. The bug could manifest itself as, for example, a process that's trying to validate an automount dentry that gets made to wait because that dentry is expired and needs cleaning up: mkdir S ffffffff8014e05a 0 32580 24956 Call Trace: [<ffffffff885371fd>] :autofs4:autofs4_wait+0x674/0x897 [<ffffffff80127f7d>] avc_has_perm+0x46/0x58 [<ffffffff8009fdcf>] autoremove_wake_function+0x0/0x2e [<ffffffff88537be6>] :autofs4:autofs4_expire_wait+0x41/0x6b [<ffffffff88535cfc>] :autofs4:autofs4_revalidate+0x91/0x149 [<ffffffff80036d96>] __lookup_hash+0xa0/0x12f [<ffffffff80057a2f>] lookup_create+0x46/0x80 [<ffffffff800e6e31>] sys_mkdirat+0x56/0xe4 versus the automount daemon which wants to remove that dentry, but can't because the normal process is holding the i_mutex lock: automount D ffffffff8014e05a 0 32581 1 32561 Call Trace: [<ffffffff80063c3f>] __mutex_lock_slowpath+0x60/0x9b [<ffffffff8000ccf1>] do_path_lookup+0x2ca/0x2f1 [<ffffffff80063c89>] .text.lock.mutex+0xf/0x14 [<ffffffff800e6d55>] do_rmdir+0x77/0xde [<ffffffff8005d229>] tracesys+0x71/0xe0 [<ffffffff8005d28d>] tracesys+0xd5/0xe0 which means that the system is deadlocked. This patch allows autofs to hold up normal processes whilst the daemon goes ahead and does things to the dentry tree behind the automouter point without risking a deadlock as almost no locks are held in d_manage() and none in d_automount(). Signed-off-by: David Howells <dhowells@redhat.com> Was-Acked-by: Ian Kent <raven@themaw.net> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-01-14 18:45:26 +00:00
old = real_mount(old_path->mnt);
p = real_mount(new_path->mnt);
parent = old->mnt_parent;
attached = mnt_has_parent(old);
fs: allow to mount beneath top mount Various distributions are adding or are in the process of adding support for system extensions and in the future configuration extensions through various tools. A more detailed explanation on system and configuration extensions can be found on the manpage which is listed below at [1]. System extension images may – dynamically at runtime — extend the /usr/ and /opt/ directory hierarchies with additional files. This is particularly useful on immutable system images where a /usr/ and/or /opt/ hierarchy residing on a read-only file system shall be extended temporarily at runtime without making any persistent modifications. When one or more system extension images are activated, their /usr/ and /opt/ hierarchies are combined via overlayfs with the same hierarchies of the host OS, and the host /usr/ and /opt/ overmounted with it ("merging"). When they are deactivated, the mount point is disassembled — again revealing the unmodified original host version of the hierarchy ("unmerging"). Merging thus makes the extension's resources suddenly appear below the /usr/ and /opt/ hierarchies as if they were included in the base OS image itself. Unmerging makes them disappear again, leaving in place only the files that were shipped with the base OS image itself. System configuration images are similar but operate on directories containing system or service configuration. On nearly all modern distributions mount propagation plays a crucial role and the rootfs of the OS is a shared mount in a peer group (usually with peer group id 1): TARGET SOURCE FSTYPE PROPAGATION MNT_ID PARENT_ID / / ext4 shared:1 29 1 On such systems all services and containers run in a separate mount namespace and are pivot_root()ed into their rootfs. A separate mount namespace is almost always used as it is the minimal isolation mechanism services have. But usually they are even much more isolated up to the point where they almost become indistinguishable from containers. Mount propagation again plays a crucial role here. The rootfs of all these services is a slave mount to the peer group of the host rootfs. This is done so the service will receive mount propagation events from the host when certain files or directories are updated. In addition, the rootfs of each service, container, and sandbox is also a shared mount in its separate peer group: TARGET SOURCE FSTYPE PROPAGATION MNT_ID PARENT_ID / / ext4 shared:24 master:1 71 47 For people not too familiar with mount propagation, the master:1 means that this is a slave mount to peer group 1. Which as one can see is the host rootfs as indicated by shared:1 above. The shared:24 indicates that the service rootfs is a shared mount in a separate peer group with peer group id 24. A service may run other services. Such nested services will also have a rootfs mount that is a slave to the peer group of the outer service rootfs mount. For containers things are just slighly different. A container's rootfs isn't a slave to the service's or host rootfs' peer group. The rootfs mount of a container is simply a shared mount in its own peer group: TARGET SOURCE FSTYPE PROPAGATION MNT_ID PARENT_ID /home/ubuntu/debian-tree / ext4 shared:99 61 60 So whereas services are isolated OS components a container is treated like a separate world and mount propagation into it is restricted to a single well known mount that is a slave to the peer group of the shared mount /run on the host: TARGET SOURCE FSTYPE PROPAGATION MNT_ID PARENT_ID /propagate/debian-tree /run/host/incoming tmpfs master:5 71 68 Here, the master:5 indicates that this mount is a slave to the peer group with peer group id 5. This allows to propagate mounts into the container and served as a workaround for not being able to insert mounts into mount namespaces directly. But the new mount api does support inserting mounts directly. For the interested reader the blogpost in [2] might be worth reading where I explain the old and the new approach to inserting mounts into mount namespaces. Containers of course, can themselves be run as services. They often run full systems themselves which means they again run services and containers with the exact same propagation settings explained above. The whole system is designed so that it can be easily updated, including all services in various fine-grained ways without having to enter every single service's mount namespace which would be prohibitively expensive. The mount propagation layout has been carefully chosen so it is possible to propagate updates for system extensions and configurations from the host into all services. The simplest model to update the whole system is to mount on top of /usr, /opt, or /etc on the host. The new mount on /usr, /opt, or /etc will then propagate into every service. This works cleanly the first time. However, when the system is updated multiple times it becomes necessary to unmount the first update on /opt, /usr, /etc and then propagate the new update. But this means, there's an interval where the old base system is accessible. This has to be avoided to protect against downgrade attacks. The vfs already exposes a mechanism to userspace whereby mounts can be mounted beneath an existing mount. Such mounts are internally referred to as "tucked". The patch series exposes the ability to mount beneath a top mount through the new MOVE_MOUNT_BENEATH flag for the move_mount() system call. This allows userspace to seamlessly upgrade mounts. After this series the only thing that will have changed is that mounting beneath an existing mount can be done explicitly instead of just implicitly. Today, there are two scenarios where a mount can be mounted beneath an existing mount instead of on top of it: (1) When a service or container is started in a new mount namespace and pivot_root()s into its new rootfs. The way this is done is by mounting the new rootfs beneath the old rootfs: fd_newroot = open("/var/lib/machines/fedora", ...); fd_oldroot = open("/", ...); fchdir(fd_newroot); pivot_root(".", "."); After the pivot_root(".", ".") call the new rootfs is mounted beneath the old rootfs which can then be unmounted to reveal the underlying mount: fchdir(fd_oldroot); umount2(".", MNT_DETACH); Since pivot_root() moves the caller into a new rootfs no mounts must be propagated out of the new rootfs as a consequence of the pivot_root() call. Thus, the mounts cannot be shared. (2) When a mount is propagated to a mount that already has another mount mounted on the same dentry. The easiest example for this is to create a new mount namespace. The following commands will create a mount namespace where the rootfs mount / will be a slave to the peer group of the host rootfs / mount's peer group. IOW, it will receive propagation from the host: mount --make-shared / unshare --mount --propagation=slave Now a new mount on the /mnt dentry in that mount namespace is created. (As it can be confusing it should be spelled out that the tmpfs mount on the /mnt dentry that was just created doesn't propagate back to the host because the rootfs mount / of the mount namespace isn't a peer of the host rootfs.): mount -t tmpfs tmpfs /mnt TARGET SOURCE FSTYPE PROPAGATION └─/mnt tmpfs tmpfs Now another terminal in the host mount namespace can observe that the mount indeed hasn't propagated back to into the host mount namespace. A new mount can now be created on top of the /mnt dentry with the rootfs mount / as its parent: mount --bind /opt /mnt TARGET SOURCE FSTYPE PROPAGATION └─/mnt /dev/sda2[/opt] ext4 shared:1 The mount namespace that was created earlier can now observe that the bind mount created on the host has propagated into it: TARGET SOURCE FSTYPE PROPAGATION └─/mnt /dev/sda2[/opt] ext4 master:1 └─/mnt tmpfs tmpfs But instead of having been mounted on top of the tmpfs mount at the /mnt dentry the /opt mount has been mounted on top of the rootfs mount at the /mnt dentry. And the tmpfs mount has been remounted on top of the propagated /opt mount at the /opt dentry. So in other words, the propagated mount has been mounted beneath the preexisting mount in that mount namespace. Mount namespaces make this easy to illustrate but it's also easy to mount beneath an existing mount in the same mount namespace (The following example assumes a shared rootfs mount / with peer group id 1): mount --bind /opt /opt TARGET SOURCE FSTYPE MNT_ID PARENT_ID PROPAGATION └─/opt /dev/sda2[/opt] ext4 188 29 shared:1 If another mount is mounted on top of the /opt mount at the /opt dentry: mount --bind /tmp /opt The following clunky mount tree will result: TARGET SOURCE FSTYPE MNT_ID PARENT_ID PROPAGATION └─/opt /dev/sda2[/tmp] ext4 405 29 shared:1 └─/opt /dev/sda2[/opt] ext4 188 405 shared:1 └─/opt /dev/sda2[/tmp] ext4 404 188 shared:1 The /tmp mount is mounted beneath the /opt mount and another copy is mounted on top of the /opt mount. This happens because the rootfs / and the /opt mount are shared mounts in the same peer group. When the new /tmp mount is supposed to be mounted at the /opt dentry then the /tmp mount first propagates to the root mount at the /opt dentry. But there already is the /opt mount mounted at the /opt dentry. So the old /opt mount at the /opt dentry will be mounted on top of the new /tmp mount at the /tmp dentry, i.e. @opt->mnt_parent is @tmp and @opt->mnt_mountpoint is /tmp (Note that @opt->mnt_root is /opt which is what shows up as /opt under SOURCE). So again, a mount will be mounted beneath a preexisting mount. (Fwiw, a few iterations of mount --bind /opt /opt in a loop on a shared rootfs is a good example of what could be referred to as mount explosion.) The main point is that such mounts allows userspace to umount a top mount and reveal an underlying mount. So for example, umounting the tmpfs mount on /mnt that was created in example (1) using mount namespaces reveals the /opt mount which was mounted beneath it. In (2) where a mount was mounted beneath the top mount in the same mount namespace unmounting the top mount would unmount both the top mount and the mount beneath. In the process the original mount would be remounted on top of the rootfs mount / at the /opt dentry again. This again, is a result of mount propagation only this time it's umount propagation. However, this can be avoided by simply making the parent mount / of the @opt mount a private or slave mount. Then the top mount and the original mount can be unmounted to reveal the mount beneath. These two examples are fairly arcane and are merely added to make it clear how mount propagation has effects on current and future features. More common use-cases will just be things like: mount -t btrfs /dev/sdA /mnt mount -t xfs /dev/sdB --beneath /mnt umount /mnt after which we'll have updated from a btrfs filesystem to a xfs filesystem without ever revealing the underlying mountpoint. The crux is that the proposed mechanism already exists and that it is so powerful as to cover cases where mounts are supposed to be updated with new versions. Crucially, it offers an important flexibility. Namely that updates to a system may either be forced or can be delayed and the umount of the top mount be left to a service if it is a cooperative one. This adds a new flag to move_mount() that allows to explicitly move a beneath the top mount adhering to the following semantics: * Mounts cannot be mounted beneath the rootfs. This restriction encompasses the rootfs but also chroots via chroot() and pivot_root(). To mount a mount beneath the rootfs or a chroot, pivot_root() can be used as illustrated above. * The source mount must be a private mount to force the kernel to allocate a new, unused peer group id. This isn't a required restriction but a voluntary one. It avoids repeating a semantical quirk that already exists today. If bind mounts which already have a peer group id are inserted into mount trees that have the same peer group id this can cause a lot of mount propagation events to be generated (For example, consider running mount --bind /opt /opt in a loop where the parent mount is a shared mount.). * Avoid getting rid of the top mount in the kernel. Cooperative services need to be able to unmount the top mount themselves. This also avoids a good deal of additional complexity. The umount would have to be propagated which would be another rather expensive operation. So namespace_lock() and lock_mount_hash() would potentially have to be held for a long time for both a mount and umount propagation. That should be avoided. * The path to mount beneath must be mounted and attached. * The top mount and its parent must be in the caller's mount namespace and the caller must be able to mount in that mount namespace. * The caller must be able to unmount the top mount to prove that they could reveal the underlying mount. * The propagation tree is calculated based on the destination mount's parent mount and the destination mount's mountpoint on the parent mount. Of course, if the parent of the destination mount and the destination mount are shared mounts in the same peer group and the mountpoint of the new mount to be mounted is a subdir of their ->mnt_root then both will receive a mount of /opt. That's probably easier to understand with an example. Assuming a standard shared rootfs /: mount --bind /opt /opt mount --bind /tmp /opt will cause the same mount tree as: mount --bind /opt /opt mount --beneath /tmp /opt because both / and /opt are shared mounts/peers in the same peer group and the /opt dentry is a subdirectory of both the parent's and the child's ->mnt_root. If a mount tree like that is created it almost always is an accident or abuse of mount propagation. Realistically what most people probably mean in this scenarios is: mount --bind /opt /opt mount --make-private /opt mount --make-shared /opt This forces the allocation of a new separate peer group for the /opt mount. Aferwards a mount --bind or mount --beneath actually makes sense as the / and /opt mount belong to different peer groups. Before that it's likely just confusion about what the user wanted to achieve. * Refuse MOVE_MOUNT_BENEATH if: (1) the @mnt_from has been overmounted in between path resolution and acquiring @namespace_sem when locking @mnt_to. This avoids the proliferation of shadow mounts. (2) if @to_mnt is moved to a different mountpoint while acquiring @namespace_sem to lock @to_mnt. (3) if @to_mnt is unmounted while acquiring @namespace_sem to lock @to_mnt. (4) if the parent of the target mount propagates to the target mount at the same mountpoint. This would mean mounting @mnt_from on @mnt_to->mnt_parent and then propagating a copy @c of @mnt_from onto @mnt_to. This defeats the whole purpose of mounting @mnt_from beneath @mnt_to. (5) if the parent mount @mnt_to->mnt_parent propagates to @mnt_from at the same mountpoint. If @mnt_to->mnt_parent propagates to @mnt_from this would mean propagating a copy @c of @mnt_from on top of @mnt_from. Afterwards @mnt_from would be mounted on top of @mnt_to->mnt_parent and @mnt_to would be unmounted from @mnt->mnt_parent and remounted on @mnt_from. But since @c is already mounted on @mnt_from, @mnt_to would ultimately be remounted on top of @c. Afterwards, @mnt_from would be covered by a copy @c of @mnt_from and @c would be covered by @mnt_from itself. This defeats the whole purpose of mounting @mnt_from beneath @mnt_to. Cases (1) to (3) are required as they deal with races that would cause bugs or unexpected behavior for users. Cases (4) and (5) refuse semantical quirks that would not be a bug but would cause weird mount trees to be created. While they can already be created via other means (mount --bind /opt /opt x n) there's no reason to repeat past mistakes in new features. Link: https://man7.org/linux/man-pages/man8/systemd-sysext.8.html [1] Link: https://brauner.io/2023/02/28/mounting-into-mount-namespaces.html [2] Link: https://github.com/flatcar/sysext-bakery Link: https://fedoraproject.org/wiki/Changes/Unified_Kernel_Support_Phase_1 Link: https://fedoraproject.org/wiki/Changes/Unified_Kernel_Support_Phase_2 Link: https://github.com/systemd/systemd/pull/26013 Reviewed-by: Seth Forshee (DigitalOcean) <sforshee@kernel.org> Message-Id: <20230202-fs-move-mount-replace-v4-4-98f3d80d7eaa@kernel.org> Signed-off-by: Christian Brauner <brauner@kernel.org>
2023-05-03 11:18:42 +00:00
if (attached)
flags |= MNT_TREE_MOVE;
old_mp = old->mnt_mp;
ns = old->mnt_ns;
err = -EINVAL;
/* The mountpoint must be in our namespace. */
if (!check_mnt(p))
goto out;
/* The thing moved must be mounted... */
if (!is_mounted(&old->mnt))
goto out;
/* ... and either ours or the root of anon namespace */
if (!(attached ? check_mnt(old) : is_anon_ns(ns)))
goto out;
if (old->mnt.mnt_flags & MNT_LOCKED)
goto out;
if (!path_mounted(old_path))
goto out;
if (d_is_dir(new_path->dentry) !=
d_is_dir(old_path->dentry))
goto out;
/*
* Don't move a mount residing in a shared parent.
*/
if (attached && IS_MNT_SHARED(parent))
goto out;
fs: allow to mount beneath top mount Various distributions are adding or are in the process of adding support for system extensions and in the future configuration extensions through various tools. A more detailed explanation on system and configuration extensions can be found on the manpage which is listed below at [1]. System extension images may – dynamically at runtime — extend the /usr/ and /opt/ directory hierarchies with additional files. This is particularly useful on immutable system images where a /usr/ and/or /opt/ hierarchy residing on a read-only file system shall be extended temporarily at runtime without making any persistent modifications. When one or more system extension images are activated, their /usr/ and /opt/ hierarchies are combined via overlayfs with the same hierarchies of the host OS, and the host /usr/ and /opt/ overmounted with it ("merging"). When they are deactivated, the mount point is disassembled — again revealing the unmodified original host version of the hierarchy ("unmerging"). Merging thus makes the extension's resources suddenly appear below the /usr/ and /opt/ hierarchies as if they were included in the base OS image itself. Unmerging makes them disappear again, leaving in place only the files that were shipped with the base OS image itself. System configuration images are similar but operate on directories containing system or service configuration. On nearly all modern distributions mount propagation plays a crucial role and the rootfs of the OS is a shared mount in a peer group (usually with peer group id 1): TARGET SOURCE FSTYPE PROPAGATION MNT_ID PARENT_ID / / ext4 shared:1 29 1 On such systems all services and containers run in a separate mount namespace and are pivot_root()ed into their rootfs. A separate mount namespace is almost always used as it is the minimal isolation mechanism services have. But usually they are even much more isolated up to the point where they almost become indistinguishable from containers. Mount propagation again plays a crucial role here. The rootfs of all these services is a slave mount to the peer group of the host rootfs. This is done so the service will receive mount propagation events from the host when certain files or directories are updated. In addition, the rootfs of each service, container, and sandbox is also a shared mount in its separate peer group: TARGET SOURCE FSTYPE PROPAGATION MNT_ID PARENT_ID / / ext4 shared:24 master:1 71 47 For people not too familiar with mount propagation, the master:1 means that this is a slave mount to peer group 1. Which as one can see is the host rootfs as indicated by shared:1 above. The shared:24 indicates that the service rootfs is a shared mount in a separate peer group with peer group id 24. A service may run other services. Such nested services will also have a rootfs mount that is a slave to the peer group of the outer service rootfs mount. For containers things are just slighly different. A container's rootfs isn't a slave to the service's or host rootfs' peer group. The rootfs mount of a container is simply a shared mount in its own peer group: TARGET SOURCE FSTYPE PROPAGATION MNT_ID PARENT_ID /home/ubuntu/debian-tree / ext4 shared:99 61 60 So whereas services are isolated OS components a container is treated like a separate world and mount propagation into it is restricted to a single well known mount that is a slave to the peer group of the shared mount /run on the host: TARGET SOURCE FSTYPE PROPAGATION MNT_ID PARENT_ID /propagate/debian-tree /run/host/incoming tmpfs master:5 71 68 Here, the master:5 indicates that this mount is a slave to the peer group with peer group id 5. This allows to propagate mounts into the container and served as a workaround for not being able to insert mounts into mount namespaces directly. But the new mount api does support inserting mounts directly. For the interested reader the blogpost in [2] might be worth reading where I explain the old and the new approach to inserting mounts into mount namespaces. Containers of course, can themselves be run as services. They often run full systems themselves which means they again run services and containers with the exact same propagation settings explained above. The whole system is designed so that it can be easily updated, including all services in various fine-grained ways without having to enter every single service's mount namespace which would be prohibitively expensive. The mount propagation layout has been carefully chosen so it is possible to propagate updates for system extensions and configurations from the host into all services. The simplest model to update the whole system is to mount on top of /usr, /opt, or /etc on the host. The new mount on /usr, /opt, or /etc will then propagate into every service. This works cleanly the first time. However, when the system is updated multiple times it becomes necessary to unmount the first update on /opt, /usr, /etc and then propagate the new update. But this means, there's an interval where the old base system is accessible. This has to be avoided to protect against downgrade attacks. The vfs already exposes a mechanism to userspace whereby mounts can be mounted beneath an existing mount. Such mounts are internally referred to as "tucked". The patch series exposes the ability to mount beneath a top mount through the new MOVE_MOUNT_BENEATH flag for the move_mount() system call. This allows userspace to seamlessly upgrade mounts. After this series the only thing that will have changed is that mounting beneath an existing mount can be done explicitly instead of just implicitly. Today, there are two scenarios where a mount can be mounted beneath an existing mount instead of on top of it: (1) When a service or container is started in a new mount namespace and pivot_root()s into its new rootfs. The way this is done is by mounting the new rootfs beneath the old rootfs: fd_newroot = open("/var/lib/machines/fedora", ...); fd_oldroot = open("/", ...); fchdir(fd_newroot); pivot_root(".", "."); After the pivot_root(".", ".") call the new rootfs is mounted beneath the old rootfs which can then be unmounted to reveal the underlying mount: fchdir(fd_oldroot); umount2(".", MNT_DETACH); Since pivot_root() moves the caller into a new rootfs no mounts must be propagated out of the new rootfs as a consequence of the pivot_root() call. Thus, the mounts cannot be shared. (2) When a mount is propagated to a mount that already has another mount mounted on the same dentry. The easiest example for this is to create a new mount namespace. The following commands will create a mount namespace where the rootfs mount / will be a slave to the peer group of the host rootfs / mount's peer group. IOW, it will receive propagation from the host: mount --make-shared / unshare --mount --propagation=slave Now a new mount on the /mnt dentry in that mount namespace is created. (As it can be confusing it should be spelled out that the tmpfs mount on the /mnt dentry that was just created doesn't propagate back to the host because the rootfs mount / of the mount namespace isn't a peer of the host rootfs.): mount -t tmpfs tmpfs /mnt TARGET SOURCE FSTYPE PROPAGATION └─/mnt tmpfs tmpfs Now another terminal in the host mount namespace can observe that the mount indeed hasn't propagated back to into the host mount namespace. A new mount can now be created on top of the /mnt dentry with the rootfs mount / as its parent: mount --bind /opt /mnt TARGET SOURCE FSTYPE PROPAGATION └─/mnt /dev/sda2[/opt] ext4 shared:1 The mount namespace that was created earlier can now observe that the bind mount created on the host has propagated into it: TARGET SOURCE FSTYPE PROPAGATION └─/mnt /dev/sda2[/opt] ext4 master:1 └─/mnt tmpfs tmpfs But instead of having been mounted on top of the tmpfs mount at the /mnt dentry the /opt mount has been mounted on top of the rootfs mount at the /mnt dentry. And the tmpfs mount has been remounted on top of the propagated /opt mount at the /opt dentry. So in other words, the propagated mount has been mounted beneath the preexisting mount in that mount namespace. Mount namespaces make this easy to illustrate but it's also easy to mount beneath an existing mount in the same mount namespace (The following example assumes a shared rootfs mount / with peer group id 1): mount --bind /opt /opt TARGET SOURCE FSTYPE MNT_ID PARENT_ID PROPAGATION └─/opt /dev/sda2[/opt] ext4 188 29 shared:1 If another mount is mounted on top of the /opt mount at the /opt dentry: mount --bind /tmp /opt The following clunky mount tree will result: TARGET SOURCE FSTYPE MNT_ID PARENT_ID PROPAGATION └─/opt /dev/sda2[/tmp] ext4 405 29 shared:1 └─/opt /dev/sda2[/opt] ext4 188 405 shared:1 └─/opt /dev/sda2[/tmp] ext4 404 188 shared:1 The /tmp mount is mounted beneath the /opt mount and another copy is mounted on top of the /opt mount. This happens because the rootfs / and the /opt mount are shared mounts in the same peer group. When the new /tmp mount is supposed to be mounted at the /opt dentry then the /tmp mount first propagates to the root mount at the /opt dentry. But there already is the /opt mount mounted at the /opt dentry. So the old /opt mount at the /opt dentry will be mounted on top of the new /tmp mount at the /tmp dentry, i.e. @opt->mnt_parent is @tmp and @opt->mnt_mountpoint is /tmp (Note that @opt->mnt_root is /opt which is what shows up as /opt under SOURCE). So again, a mount will be mounted beneath a preexisting mount. (Fwiw, a few iterations of mount --bind /opt /opt in a loop on a shared rootfs is a good example of what could be referred to as mount explosion.) The main point is that such mounts allows userspace to umount a top mount and reveal an underlying mount. So for example, umounting the tmpfs mount on /mnt that was created in example (1) using mount namespaces reveals the /opt mount which was mounted beneath it. In (2) where a mount was mounted beneath the top mount in the same mount namespace unmounting the top mount would unmount both the top mount and the mount beneath. In the process the original mount would be remounted on top of the rootfs mount / at the /opt dentry again. This again, is a result of mount propagation only this time it's umount propagation. However, this can be avoided by simply making the parent mount / of the @opt mount a private or slave mount. Then the top mount and the original mount can be unmounted to reveal the mount beneath. These two examples are fairly arcane and are merely added to make it clear how mount propagation has effects on current and future features. More common use-cases will just be things like: mount -t btrfs /dev/sdA /mnt mount -t xfs /dev/sdB --beneath /mnt umount /mnt after which we'll have updated from a btrfs filesystem to a xfs filesystem without ever revealing the underlying mountpoint. The crux is that the proposed mechanism already exists and that it is so powerful as to cover cases where mounts are supposed to be updated with new versions. Crucially, it offers an important flexibility. Namely that updates to a system may either be forced or can be delayed and the umount of the top mount be left to a service if it is a cooperative one. This adds a new flag to move_mount() that allows to explicitly move a beneath the top mount adhering to the following semantics: * Mounts cannot be mounted beneath the rootfs. This restriction encompasses the rootfs but also chroots via chroot() and pivot_root(). To mount a mount beneath the rootfs or a chroot, pivot_root() can be used as illustrated above. * The source mount must be a private mount to force the kernel to allocate a new, unused peer group id. This isn't a required restriction but a voluntary one. It avoids repeating a semantical quirk that already exists today. If bind mounts which already have a peer group id are inserted into mount trees that have the same peer group id this can cause a lot of mount propagation events to be generated (For example, consider running mount --bind /opt /opt in a loop where the parent mount is a shared mount.). * Avoid getting rid of the top mount in the kernel. Cooperative services need to be able to unmount the top mount themselves. This also avoids a good deal of additional complexity. The umount would have to be propagated which would be another rather expensive operation. So namespace_lock() and lock_mount_hash() would potentially have to be held for a long time for both a mount and umount propagation. That should be avoided. * The path to mount beneath must be mounted and attached. * The top mount and its parent must be in the caller's mount namespace and the caller must be able to mount in that mount namespace. * The caller must be able to unmount the top mount to prove that they could reveal the underlying mount. * The propagation tree is calculated based on the destination mount's parent mount and the destination mount's mountpoint on the parent mount. Of course, if the parent of the destination mount and the destination mount are shared mounts in the same peer group and the mountpoint of the new mount to be mounted is a subdir of their ->mnt_root then both will receive a mount of /opt. That's probably easier to understand with an example. Assuming a standard shared rootfs /: mount --bind /opt /opt mount --bind /tmp /opt will cause the same mount tree as: mount --bind /opt /opt mount --beneath /tmp /opt because both / and /opt are shared mounts/peers in the same peer group and the /opt dentry is a subdirectory of both the parent's and the child's ->mnt_root. If a mount tree like that is created it almost always is an accident or abuse of mount propagation. Realistically what most people probably mean in this scenarios is: mount --bind /opt /opt mount --make-private /opt mount --make-shared /opt This forces the allocation of a new separate peer group for the /opt mount. Aferwards a mount --bind or mount --beneath actually makes sense as the / and /opt mount belong to different peer groups. Before that it's likely just confusion about what the user wanted to achieve. * Refuse MOVE_MOUNT_BENEATH if: (1) the @mnt_from has been overmounted in between path resolution and acquiring @namespace_sem when locking @mnt_to. This avoids the proliferation of shadow mounts. (2) if @to_mnt is moved to a different mountpoint while acquiring @namespace_sem to lock @to_mnt. (3) if @to_mnt is unmounted while acquiring @namespace_sem to lock @to_mnt. (4) if the parent of the target mount propagates to the target mount at the same mountpoint. This would mean mounting @mnt_from on @mnt_to->mnt_parent and then propagating a copy @c of @mnt_from onto @mnt_to. This defeats the whole purpose of mounting @mnt_from beneath @mnt_to. (5) if the parent mount @mnt_to->mnt_parent propagates to @mnt_from at the same mountpoint. If @mnt_to->mnt_parent propagates to @mnt_from this would mean propagating a copy @c of @mnt_from on top of @mnt_from. Afterwards @mnt_from would be mounted on top of @mnt_to->mnt_parent and @mnt_to would be unmounted from @mnt->mnt_parent and remounted on @mnt_from. But since @c is already mounted on @mnt_from, @mnt_to would ultimately be remounted on top of @c. Afterwards, @mnt_from would be covered by a copy @c of @mnt_from and @c would be covered by @mnt_from itself. This defeats the whole purpose of mounting @mnt_from beneath @mnt_to. Cases (1) to (3) are required as they deal with races that would cause bugs or unexpected behavior for users. Cases (4) and (5) refuse semantical quirks that would not be a bug but would cause weird mount trees to be created. While they can already be created via other means (mount --bind /opt /opt x n) there's no reason to repeat past mistakes in new features. Link: https://man7.org/linux/man-pages/man8/systemd-sysext.8.html [1] Link: https://brauner.io/2023/02/28/mounting-into-mount-namespaces.html [2] Link: https://github.com/flatcar/sysext-bakery Link: https://fedoraproject.org/wiki/Changes/Unified_Kernel_Support_Phase_1 Link: https://fedoraproject.org/wiki/Changes/Unified_Kernel_Support_Phase_2 Link: https://github.com/systemd/systemd/pull/26013 Reviewed-by: Seth Forshee (DigitalOcean) <sforshee@kernel.org> Message-Id: <20230202-fs-move-mount-replace-v4-4-98f3d80d7eaa@kernel.org> Signed-off-by: Christian Brauner <brauner@kernel.org>
2023-05-03 11:18:42 +00:00
if (beneath) {
err = can_move_mount_beneath(old_path, new_path, mp);
if (err)
goto out;
err = -EINVAL;
p = p->mnt_parent;
flags |= MNT_TREE_BENEATH;
}
/*
* Don't move a mount tree containing unbindable mounts to a destination
* mount which is shared.
*/
if (IS_MNT_SHARED(p) && tree_contains_unbindable(old))
goto out;
err = -ELOOP;
if (!check_for_nsfs_mounts(old))
goto out;
for (; mnt_has_parent(p); p = p->mnt_parent)
if (p == old)
goto out;
fs: allow to mount beneath top mount Various distributions are adding or are in the process of adding support for system extensions and in the future configuration extensions through various tools. A more detailed explanation on system and configuration extensions can be found on the manpage which is listed below at [1]. System extension images may – dynamically at runtime — extend the /usr/ and /opt/ directory hierarchies with additional files. This is particularly useful on immutable system images where a /usr/ and/or /opt/ hierarchy residing on a read-only file system shall be extended temporarily at runtime without making any persistent modifications. When one or more system extension images are activated, their /usr/ and /opt/ hierarchies are combined via overlayfs with the same hierarchies of the host OS, and the host /usr/ and /opt/ overmounted with it ("merging"). When they are deactivated, the mount point is disassembled — again revealing the unmodified original host version of the hierarchy ("unmerging"). Merging thus makes the extension's resources suddenly appear below the /usr/ and /opt/ hierarchies as if they were included in the base OS image itself. Unmerging makes them disappear again, leaving in place only the files that were shipped with the base OS image itself. System configuration images are similar but operate on directories containing system or service configuration. On nearly all modern distributions mount propagation plays a crucial role and the rootfs of the OS is a shared mount in a peer group (usually with peer group id 1): TARGET SOURCE FSTYPE PROPAGATION MNT_ID PARENT_ID / / ext4 shared:1 29 1 On such systems all services and containers run in a separate mount namespace and are pivot_root()ed into their rootfs. A separate mount namespace is almost always used as it is the minimal isolation mechanism services have. But usually they are even much more isolated up to the point where they almost become indistinguishable from containers. Mount propagation again plays a crucial role here. The rootfs of all these services is a slave mount to the peer group of the host rootfs. This is done so the service will receive mount propagation events from the host when certain files or directories are updated. In addition, the rootfs of each service, container, and sandbox is also a shared mount in its separate peer group: TARGET SOURCE FSTYPE PROPAGATION MNT_ID PARENT_ID / / ext4 shared:24 master:1 71 47 For people not too familiar with mount propagation, the master:1 means that this is a slave mount to peer group 1. Which as one can see is the host rootfs as indicated by shared:1 above. The shared:24 indicates that the service rootfs is a shared mount in a separate peer group with peer group id 24. A service may run other services. Such nested services will also have a rootfs mount that is a slave to the peer group of the outer service rootfs mount. For containers things are just slighly different. A container's rootfs isn't a slave to the service's or host rootfs' peer group. The rootfs mount of a container is simply a shared mount in its own peer group: TARGET SOURCE FSTYPE PROPAGATION MNT_ID PARENT_ID /home/ubuntu/debian-tree / ext4 shared:99 61 60 So whereas services are isolated OS components a container is treated like a separate world and mount propagation into it is restricted to a single well known mount that is a slave to the peer group of the shared mount /run on the host: TARGET SOURCE FSTYPE PROPAGATION MNT_ID PARENT_ID /propagate/debian-tree /run/host/incoming tmpfs master:5 71 68 Here, the master:5 indicates that this mount is a slave to the peer group with peer group id 5. This allows to propagate mounts into the container and served as a workaround for not being able to insert mounts into mount namespaces directly. But the new mount api does support inserting mounts directly. For the interested reader the blogpost in [2] might be worth reading where I explain the old and the new approach to inserting mounts into mount namespaces. Containers of course, can themselves be run as services. They often run full systems themselves which means they again run services and containers with the exact same propagation settings explained above. The whole system is designed so that it can be easily updated, including all services in various fine-grained ways without having to enter every single service's mount namespace which would be prohibitively expensive. The mount propagation layout has been carefully chosen so it is possible to propagate updates for system extensions and configurations from the host into all services. The simplest model to update the whole system is to mount on top of /usr, /opt, or /etc on the host. The new mount on /usr, /opt, or /etc will then propagate into every service. This works cleanly the first time. However, when the system is updated multiple times it becomes necessary to unmount the first update on /opt, /usr, /etc and then propagate the new update. But this means, there's an interval where the old base system is accessible. This has to be avoided to protect against downgrade attacks. The vfs already exposes a mechanism to userspace whereby mounts can be mounted beneath an existing mount. Such mounts are internally referred to as "tucked". The patch series exposes the ability to mount beneath a top mount through the new MOVE_MOUNT_BENEATH flag for the move_mount() system call. This allows userspace to seamlessly upgrade mounts. After this series the only thing that will have changed is that mounting beneath an existing mount can be done explicitly instead of just implicitly. Today, there are two scenarios where a mount can be mounted beneath an existing mount instead of on top of it: (1) When a service or container is started in a new mount namespace and pivot_root()s into its new rootfs. The way this is done is by mounting the new rootfs beneath the old rootfs: fd_newroot = open("/var/lib/machines/fedora", ...); fd_oldroot = open("/", ...); fchdir(fd_newroot); pivot_root(".", "."); After the pivot_root(".", ".") call the new rootfs is mounted beneath the old rootfs which can then be unmounted to reveal the underlying mount: fchdir(fd_oldroot); umount2(".", MNT_DETACH); Since pivot_root() moves the caller into a new rootfs no mounts must be propagated out of the new rootfs as a consequence of the pivot_root() call. Thus, the mounts cannot be shared. (2) When a mount is propagated to a mount that already has another mount mounted on the same dentry. The easiest example for this is to create a new mount namespace. The following commands will create a mount namespace where the rootfs mount / will be a slave to the peer group of the host rootfs / mount's peer group. IOW, it will receive propagation from the host: mount --make-shared / unshare --mount --propagation=slave Now a new mount on the /mnt dentry in that mount namespace is created. (As it can be confusing it should be spelled out that the tmpfs mount on the /mnt dentry that was just created doesn't propagate back to the host because the rootfs mount / of the mount namespace isn't a peer of the host rootfs.): mount -t tmpfs tmpfs /mnt TARGET SOURCE FSTYPE PROPAGATION └─/mnt tmpfs tmpfs Now another terminal in the host mount namespace can observe that the mount indeed hasn't propagated back to into the host mount namespace. A new mount can now be created on top of the /mnt dentry with the rootfs mount / as its parent: mount --bind /opt /mnt TARGET SOURCE FSTYPE PROPAGATION └─/mnt /dev/sda2[/opt] ext4 shared:1 The mount namespace that was created earlier can now observe that the bind mount created on the host has propagated into it: TARGET SOURCE FSTYPE PROPAGATION └─/mnt /dev/sda2[/opt] ext4 master:1 └─/mnt tmpfs tmpfs But instead of having been mounted on top of the tmpfs mount at the /mnt dentry the /opt mount has been mounted on top of the rootfs mount at the /mnt dentry. And the tmpfs mount has been remounted on top of the propagated /opt mount at the /opt dentry. So in other words, the propagated mount has been mounted beneath the preexisting mount in that mount namespace. Mount namespaces make this easy to illustrate but it's also easy to mount beneath an existing mount in the same mount namespace (The following example assumes a shared rootfs mount / with peer group id 1): mount --bind /opt /opt TARGET SOURCE FSTYPE MNT_ID PARENT_ID PROPAGATION └─/opt /dev/sda2[/opt] ext4 188 29 shared:1 If another mount is mounted on top of the /opt mount at the /opt dentry: mount --bind /tmp /opt The following clunky mount tree will result: TARGET SOURCE FSTYPE MNT_ID PARENT_ID PROPAGATION └─/opt /dev/sda2[/tmp] ext4 405 29 shared:1 └─/opt /dev/sda2[/opt] ext4 188 405 shared:1 └─/opt /dev/sda2[/tmp] ext4 404 188 shared:1 The /tmp mount is mounted beneath the /opt mount and another copy is mounted on top of the /opt mount. This happens because the rootfs / and the /opt mount are shared mounts in the same peer group. When the new /tmp mount is supposed to be mounted at the /opt dentry then the /tmp mount first propagates to the root mount at the /opt dentry. But there already is the /opt mount mounted at the /opt dentry. So the old /opt mount at the /opt dentry will be mounted on top of the new /tmp mount at the /tmp dentry, i.e. @opt->mnt_parent is @tmp and @opt->mnt_mountpoint is /tmp (Note that @opt->mnt_root is /opt which is what shows up as /opt under SOURCE). So again, a mount will be mounted beneath a preexisting mount. (Fwiw, a few iterations of mount --bind /opt /opt in a loop on a shared rootfs is a good example of what could be referred to as mount explosion.) The main point is that such mounts allows userspace to umount a top mount and reveal an underlying mount. So for example, umounting the tmpfs mount on /mnt that was created in example (1) using mount namespaces reveals the /opt mount which was mounted beneath it. In (2) where a mount was mounted beneath the top mount in the same mount namespace unmounting the top mount would unmount both the top mount and the mount beneath. In the process the original mount would be remounted on top of the rootfs mount / at the /opt dentry again. This again, is a result of mount propagation only this time it's umount propagation. However, this can be avoided by simply making the parent mount / of the @opt mount a private or slave mount. Then the top mount and the original mount can be unmounted to reveal the mount beneath. These two examples are fairly arcane and are merely added to make it clear how mount propagation has effects on current and future features. More common use-cases will just be things like: mount -t btrfs /dev/sdA /mnt mount -t xfs /dev/sdB --beneath /mnt umount /mnt after which we'll have updated from a btrfs filesystem to a xfs filesystem without ever revealing the underlying mountpoint. The crux is that the proposed mechanism already exists and that it is so powerful as to cover cases where mounts are supposed to be updated with new versions. Crucially, it offers an important flexibility. Namely that updates to a system may either be forced or can be delayed and the umount of the top mount be left to a service if it is a cooperative one. This adds a new flag to move_mount() that allows to explicitly move a beneath the top mount adhering to the following semantics: * Mounts cannot be mounted beneath the rootfs. This restriction encompasses the rootfs but also chroots via chroot() and pivot_root(). To mount a mount beneath the rootfs or a chroot, pivot_root() can be used as illustrated above. * The source mount must be a private mount to force the kernel to allocate a new, unused peer group id. This isn't a required restriction but a voluntary one. It avoids repeating a semantical quirk that already exists today. If bind mounts which already have a peer group id are inserted into mount trees that have the same peer group id this can cause a lot of mount propagation events to be generated (For example, consider running mount --bind /opt /opt in a loop where the parent mount is a shared mount.). * Avoid getting rid of the top mount in the kernel. Cooperative services need to be able to unmount the top mount themselves. This also avoids a good deal of additional complexity. The umount would have to be propagated which would be another rather expensive operation. So namespace_lock() and lock_mount_hash() would potentially have to be held for a long time for both a mount and umount propagation. That should be avoided. * The path to mount beneath must be mounted and attached. * The top mount and its parent must be in the caller's mount namespace and the caller must be able to mount in that mount namespace. * The caller must be able to unmount the top mount to prove that they could reveal the underlying mount. * The propagation tree is calculated based on the destination mount's parent mount and the destination mount's mountpoint on the parent mount. Of course, if the parent of the destination mount and the destination mount are shared mounts in the same peer group and the mountpoint of the new mount to be mounted is a subdir of their ->mnt_root then both will receive a mount of /opt. That's probably easier to understand with an example. Assuming a standard shared rootfs /: mount --bind /opt /opt mount --bind /tmp /opt will cause the same mount tree as: mount --bind /opt /opt mount --beneath /tmp /opt because both / and /opt are shared mounts/peers in the same peer group and the /opt dentry is a subdirectory of both the parent's and the child's ->mnt_root. If a mount tree like that is created it almost always is an accident or abuse of mount propagation. Realistically what most people probably mean in this scenarios is: mount --bind /opt /opt mount --make-private /opt mount --make-shared /opt This forces the allocation of a new separate peer group for the /opt mount. Aferwards a mount --bind or mount --beneath actually makes sense as the / and /opt mount belong to different peer groups. Before that it's likely just confusion about what the user wanted to achieve. * Refuse MOVE_MOUNT_BENEATH if: (1) the @mnt_from has been overmounted in between path resolution and acquiring @namespace_sem when locking @mnt_to. This avoids the proliferation of shadow mounts. (2) if @to_mnt is moved to a different mountpoint while acquiring @namespace_sem to lock @to_mnt. (3) if @to_mnt is unmounted while acquiring @namespace_sem to lock @to_mnt. (4) if the parent of the target mount propagates to the target mount at the same mountpoint. This would mean mounting @mnt_from on @mnt_to->mnt_parent and then propagating a copy @c of @mnt_from onto @mnt_to. This defeats the whole purpose of mounting @mnt_from beneath @mnt_to. (5) if the parent mount @mnt_to->mnt_parent propagates to @mnt_from at the same mountpoint. If @mnt_to->mnt_parent propagates to @mnt_from this would mean propagating a copy @c of @mnt_from on top of @mnt_from. Afterwards @mnt_from would be mounted on top of @mnt_to->mnt_parent and @mnt_to would be unmounted from @mnt->mnt_parent and remounted on @mnt_from. But since @c is already mounted on @mnt_from, @mnt_to would ultimately be remounted on top of @c. Afterwards, @mnt_from would be covered by a copy @c of @mnt_from and @c would be covered by @mnt_from itself. This defeats the whole purpose of mounting @mnt_from beneath @mnt_to. Cases (1) to (3) are required as they deal with races that would cause bugs or unexpected behavior for users. Cases (4) and (5) refuse semantical quirks that would not be a bug but would cause weird mount trees to be created. While they can already be created via other means (mount --bind /opt /opt x n) there's no reason to repeat past mistakes in new features. Link: https://man7.org/linux/man-pages/man8/systemd-sysext.8.html [1] Link: https://brauner.io/2023/02/28/mounting-into-mount-namespaces.html [2] Link: https://github.com/flatcar/sysext-bakery Link: https://fedoraproject.org/wiki/Changes/Unified_Kernel_Support_Phase_1 Link: https://fedoraproject.org/wiki/Changes/Unified_Kernel_Support_Phase_2 Link: https://github.com/systemd/systemd/pull/26013 Reviewed-by: Seth Forshee (DigitalOcean) <sforshee@kernel.org> Message-Id: <20230202-fs-move-mount-replace-v4-4-98f3d80d7eaa@kernel.org> Signed-off-by: Christian Brauner <brauner@kernel.org>
2023-05-03 11:18:42 +00:00
err = attach_recursive_mnt(old, real_mount(new_path->mnt), mp, flags);
if (err)
goto out;
/* if the mount is moved, it should no longer be expire
* automatically */
list_del_init(&old->mnt_expire);
if (attached)
put_mountpoint(old_mp);
out:
unlock_mount(mp);
if (!err) {
if (attached)
mntput_no_expire(parent);
else
free_mnt_ns(ns);
}
return err;
}
static int do_move_mount_old(struct path *path, const char *old_name)
{
struct path old_path;
int err;
if (!old_name || !*old_name)
return -EINVAL;
err = kern_path(old_name, LOOKUP_FOLLOW, &old_path);
if (err)
return err;
fs: allow to mount beneath top mount Various distributions are adding or are in the process of adding support for system extensions and in the future configuration extensions through various tools. A more detailed explanation on system and configuration extensions can be found on the manpage which is listed below at [1]. System extension images may – dynamically at runtime — extend the /usr/ and /opt/ directory hierarchies with additional files. This is particularly useful on immutable system images where a /usr/ and/or /opt/ hierarchy residing on a read-only file system shall be extended temporarily at runtime without making any persistent modifications. When one or more system extension images are activated, their /usr/ and /opt/ hierarchies are combined via overlayfs with the same hierarchies of the host OS, and the host /usr/ and /opt/ overmounted with it ("merging"). When they are deactivated, the mount point is disassembled — again revealing the unmodified original host version of the hierarchy ("unmerging"). Merging thus makes the extension's resources suddenly appear below the /usr/ and /opt/ hierarchies as if they were included in the base OS image itself. Unmerging makes them disappear again, leaving in place only the files that were shipped with the base OS image itself. System configuration images are similar but operate on directories containing system or service configuration. On nearly all modern distributions mount propagation plays a crucial role and the rootfs of the OS is a shared mount in a peer group (usually with peer group id 1): TARGET SOURCE FSTYPE PROPAGATION MNT_ID PARENT_ID / / ext4 shared:1 29 1 On such systems all services and containers run in a separate mount namespace and are pivot_root()ed into their rootfs. A separate mount namespace is almost always used as it is the minimal isolation mechanism services have. But usually they are even much more isolated up to the point where they almost become indistinguishable from containers. Mount propagation again plays a crucial role here. The rootfs of all these services is a slave mount to the peer group of the host rootfs. This is done so the service will receive mount propagation events from the host when certain files or directories are updated. In addition, the rootfs of each service, container, and sandbox is also a shared mount in its separate peer group: TARGET SOURCE FSTYPE PROPAGATION MNT_ID PARENT_ID / / ext4 shared:24 master:1 71 47 For people not too familiar with mount propagation, the master:1 means that this is a slave mount to peer group 1. Which as one can see is the host rootfs as indicated by shared:1 above. The shared:24 indicates that the service rootfs is a shared mount in a separate peer group with peer group id 24. A service may run other services. Such nested services will also have a rootfs mount that is a slave to the peer group of the outer service rootfs mount. For containers things are just slighly different. A container's rootfs isn't a slave to the service's or host rootfs' peer group. The rootfs mount of a container is simply a shared mount in its own peer group: TARGET SOURCE FSTYPE PROPAGATION MNT_ID PARENT_ID /home/ubuntu/debian-tree / ext4 shared:99 61 60 So whereas services are isolated OS components a container is treated like a separate world and mount propagation into it is restricted to a single well known mount that is a slave to the peer group of the shared mount /run on the host: TARGET SOURCE FSTYPE PROPAGATION MNT_ID PARENT_ID /propagate/debian-tree /run/host/incoming tmpfs master:5 71 68 Here, the master:5 indicates that this mount is a slave to the peer group with peer group id 5. This allows to propagate mounts into the container and served as a workaround for not being able to insert mounts into mount namespaces directly. But the new mount api does support inserting mounts directly. For the interested reader the blogpost in [2] might be worth reading where I explain the old and the new approach to inserting mounts into mount namespaces. Containers of course, can themselves be run as services. They often run full systems themselves which means they again run services and containers with the exact same propagation settings explained above. The whole system is designed so that it can be easily updated, including all services in various fine-grained ways without having to enter every single service's mount namespace which would be prohibitively expensive. The mount propagation layout has been carefully chosen so it is possible to propagate updates for system extensions and configurations from the host into all services. The simplest model to update the whole system is to mount on top of /usr, /opt, or /etc on the host. The new mount on /usr, /opt, or /etc will then propagate into every service. This works cleanly the first time. However, when the system is updated multiple times it becomes necessary to unmount the first update on /opt, /usr, /etc and then propagate the new update. But this means, there's an interval where the old base system is accessible. This has to be avoided to protect against downgrade attacks. The vfs already exposes a mechanism to userspace whereby mounts can be mounted beneath an existing mount. Such mounts are internally referred to as "tucked". The patch series exposes the ability to mount beneath a top mount through the new MOVE_MOUNT_BENEATH flag for the move_mount() system call. This allows userspace to seamlessly upgrade mounts. After this series the only thing that will have changed is that mounting beneath an existing mount can be done explicitly instead of just implicitly. Today, there are two scenarios where a mount can be mounted beneath an existing mount instead of on top of it: (1) When a service or container is started in a new mount namespace and pivot_root()s into its new rootfs. The way this is done is by mounting the new rootfs beneath the old rootfs: fd_newroot = open("/var/lib/machines/fedora", ...); fd_oldroot = open("/", ...); fchdir(fd_newroot); pivot_root(".", "."); After the pivot_root(".", ".") call the new rootfs is mounted beneath the old rootfs which can then be unmounted to reveal the underlying mount: fchdir(fd_oldroot); umount2(".", MNT_DETACH); Since pivot_root() moves the caller into a new rootfs no mounts must be propagated out of the new rootfs as a consequence of the pivot_root() call. Thus, the mounts cannot be shared. (2) When a mount is propagated to a mount that already has another mount mounted on the same dentry. The easiest example for this is to create a new mount namespace. The following commands will create a mount namespace where the rootfs mount / will be a slave to the peer group of the host rootfs / mount's peer group. IOW, it will receive propagation from the host: mount --make-shared / unshare --mount --propagation=slave Now a new mount on the /mnt dentry in that mount namespace is created. (As it can be confusing it should be spelled out that the tmpfs mount on the /mnt dentry that was just created doesn't propagate back to the host because the rootfs mount / of the mount namespace isn't a peer of the host rootfs.): mount -t tmpfs tmpfs /mnt TARGET SOURCE FSTYPE PROPAGATION └─/mnt tmpfs tmpfs Now another terminal in the host mount namespace can observe that the mount indeed hasn't propagated back to into the host mount namespace. A new mount can now be created on top of the /mnt dentry with the rootfs mount / as its parent: mount --bind /opt /mnt TARGET SOURCE FSTYPE PROPAGATION └─/mnt /dev/sda2[/opt] ext4 shared:1 The mount namespace that was created earlier can now observe that the bind mount created on the host has propagated into it: TARGET SOURCE FSTYPE PROPAGATION └─/mnt /dev/sda2[/opt] ext4 master:1 └─/mnt tmpfs tmpfs But instead of having been mounted on top of the tmpfs mount at the /mnt dentry the /opt mount has been mounted on top of the rootfs mount at the /mnt dentry. And the tmpfs mount has been remounted on top of the propagated /opt mount at the /opt dentry. So in other words, the propagated mount has been mounted beneath the preexisting mount in that mount namespace. Mount namespaces make this easy to illustrate but it's also easy to mount beneath an existing mount in the same mount namespace (The following example assumes a shared rootfs mount / with peer group id 1): mount --bind /opt /opt TARGET SOURCE FSTYPE MNT_ID PARENT_ID PROPAGATION └─/opt /dev/sda2[/opt] ext4 188 29 shared:1 If another mount is mounted on top of the /opt mount at the /opt dentry: mount --bind /tmp /opt The following clunky mount tree will result: TARGET SOURCE FSTYPE MNT_ID PARENT_ID PROPAGATION └─/opt /dev/sda2[/tmp] ext4 405 29 shared:1 └─/opt /dev/sda2[/opt] ext4 188 405 shared:1 └─/opt /dev/sda2[/tmp] ext4 404 188 shared:1 The /tmp mount is mounted beneath the /opt mount and another copy is mounted on top of the /opt mount. This happens because the rootfs / and the /opt mount are shared mounts in the same peer group. When the new /tmp mount is supposed to be mounted at the /opt dentry then the /tmp mount first propagates to the root mount at the /opt dentry. But there already is the /opt mount mounted at the /opt dentry. So the old /opt mount at the /opt dentry will be mounted on top of the new /tmp mount at the /tmp dentry, i.e. @opt->mnt_parent is @tmp and @opt->mnt_mountpoint is /tmp (Note that @opt->mnt_root is /opt which is what shows up as /opt under SOURCE). So again, a mount will be mounted beneath a preexisting mount. (Fwiw, a few iterations of mount --bind /opt /opt in a loop on a shared rootfs is a good example of what could be referred to as mount explosion.) The main point is that such mounts allows userspace to umount a top mount and reveal an underlying mount. So for example, umounting the tmpfs mount on /mnt that was created in example (1) using mount namespaces reveals the /opt mount which was mounted beneath it. In (2) where a mount was mounted beneath the top mount in the same mount namespace unmounting the top mount would unmount both the top mount and the mount beneath. In the process the original mount would be remounted on top of the rootfs mount / at the /opt dentry again. This again, is a result of mount propagation only this time it's umount propagation. However, this can be avoided by simply making the parent mount / of the @opt mount a private or slave mount. Then the top mount and the original mount can be unmounted to reveal the mount beneath. These two examples are fairly arcane and are merely added to make it clear how mount propagation has effects on current and future features. More common use-cases will just be things like: mount -t btrfs /dev/sdA /mnt mount -t xfs /dev/sdB --beneath /mnt umount /mnt after which we'll have updated from a btrfs filesystem to a xfs filesystem without ever revealing the underlying mountpoint. The crux is that the proposed mechanism already exists and that it is so powerful as to cover cases where mounts are supposed to be updated with new versions. Crucially, it offers an important flexibility. Namely that updates to a system may either be forced or can be delayed and the umount of the top mount be left to a service if it is a cooperative one. This adds a new flag to move_mount() that allows to explicitly move a beneath the top mount adhering to the following semantics: * Mounts cannot be mounted beneath the rootfs. This restriction encompasses the rootfs but also chroots via chroot() and pivot_root(). To mount a mount beneath the rootfs or a chroot, pivot_root() can be used as illustrated above. * The source mount must be a private mount to force the kernel to allocate a new, unused peer group id. This isn't a required restriction but a voluntary one. It avoids repeating a semantical quirk that already exists today. If bind mounts which already have a peer group id are inserted into mount trees that have the same peer group id this can cause a lot of mount propagation events to be generated (For example, consider running mount --bind /opt /opt in a loop where the parent mount is a shared mount.). * Avoid getting rid of the top mount in the kernel. Cooperative services need to be able to unmount the top mount themselves. This also avoids a good deal of additional complexity. The umount would have to be propagated which would be another rather expensive operation. So namespace_lock() and lock_mount_hash() would potentially have to be held for a long time for both a mount and umount propagation. That should be avoided. * The path to mount beneath must be mounted and attached. * The top mount and its parent must be in the caller's mount namespace and the caller must be able to mount in that mount namespace. * The caller must be able to unmount the top mount to prove that they could reveal the underlying mount. * The propagation tree is calculated based on the destination mount's parent mount and the destination mount's mountpoint on the parent mount. Of course, if the parent of the destination mount and the destination mount are shared mounts in the same peer group and the mountpoint of the new mount to be mounted is a subdir of their ->mnt_root then both will receive a mount of /opt. That's probably easier to understand with an example. Assuming a standard shared rootfs /: mount --bind /opt /opt mount --bind /tmp /opt will cause the same mount tree as: mount --bind /opt /opt mount --beneath /tmp /opt because both / and /opt are shared mounts/peers in the same peer group and the /opt dentry is a subdirectory of both the parent's and the child's ->mnt_root. If a mount tree like that is created it almost always is an accident or abuse of mount propagation. Realistically what most people probably mean in this scenarios is: mount --bind /opt /opt mount --make-private /opt mount --make-shared /opt This forces the allocation of a new separate peer group for the /opt mount. Aferwards a mount --bind or mount --beneath actually makes sense as the / and /opt mount belong to different peer groups. Before that it's likely just confusion about what the user wanted to achieve. * Refuse MOVE_MOUNT_BENEATH if: (1) the @mnt_from has been overmounted in between path resolution and acquiring @namespace_sem when locking @mnt_to. This avoids the proliferation of shadow mounts. (2) if @to_mnt is moved to a different mountpoint while acquiring @namespace_sem to lock @to_mnt. (3) if @to_mnt is unmounted while acquiring @namespace_sem to lock @to_mnt. (4) if the parent of the target mount propagates to the target mount at the same mountpoint. This would mean mounting @mnt_from on @mnt_to->mnt_parent and then propagating a copy @c of @mnt_from onto @mnt_to. This defeats the whole purpose of mounting @mnt_from beneath @mnt_to. (5) if the parent mount @mnt_to->mnt_parent propagates to @mnt_from at the same mountpoint. If @mnt_to->mnt_parent propagates to @mnt_from this would mean propagating a copy @c of @mnt_from on top of @mnt_from. Afterwards @mnt_from would be mounted on top of @mnt_to->mnt_parent and @mnt_to would be unmounted from @mnt->mnt_parent and remounted on @mnt_from. But since @c is already mounted on @mnt_from, @mnt_to would ultimately be remounted on top of @c. Afterwards, @mnt_from would be covered by a copy @c of @mnt_from and @c would be covered by @mnt_from itself. This defeats the whole purpose of mounting @mnt_from beneath @mnt_to. Cases (1) to (3) are required as they deal with races that would cause bugs or unexpected behavior for users. Cases (4) and (5) refuse semantical quirks that would not be a bug but would cause weird mount trees to be created. While they can already be created via other means (mount --bind /opt /opt x n) there's no reason to repeat past mistakes in new features. Link: https://man7.org/linux/man-pages/man8/systemd-sysext.8.html [1] Link: https://brauner.io/2023/02/28/mounting-into-mount-namespaces.html [2] Link: https://github.com/flatcar/sysext-bakery Link: https://fedoraproject.org/wiki/Changes/Unified_Kernel_Support_Phase_1 Link: https://fedoraproject.org/wiki/Changes/Unified_Kernel_Support_Phase_2 Link: https://github.com/systemd/systemd/pull/26013 Reviewed-by: Seth Forshee (DigitalOcean) <sforshee@kernel.org> Message-Id: <20230202-fs-move-mount-replace-v4-4-98f3d80d7eaa@kernel.org> Signed-off-by: Christian Brauner <brauner@kernel.org>
2023-05-03 11:18:42 +00:00
err = do_move_mount(&old_path, path, false);
path_put(&old_path);
return err;
}
/*
* add a mount into a namespace's mount tree
*/
static int do_add_mount(struct mount *newmnt, struct mountpoint *mp,
const struct path *path, int mnt_flags)
{
struct mount *parent = real_mount(path->mnt);
smarter propagate_mnt() The current mainline has copies propagated to *all* nodes, then tears down the copies we made for nodes that do not contain counterparts of the desired mountpoint. That sets the right propagation graph for the copies (at teardown time we move the slaves of removed node to a surviving peer or directly to master), but we end up paying a fairly steep price in useless allocations. It's fairly easy to create a situation where N calls of mount(2) create exactly N bindings, with O(N^2) vfsmounts allocated and freed in process. Fortunately, it is possible to avoid those allocations/freeings. The trick is to create copies in the right order and find which one would've eventually become a master with the current algorithm. It turns out to be possible in O(nodes getting propagation) time and with no extra allocations at all. One part is that we need to make sure that eventual master will be created before its slaves, so we need to walk the propagation tree in a different order - by peer groups. And iterate through the peers before dealing with the next group. Another thing is finding the (earlier) copy that will be a master of one we are about to create; to do that we are (temporary) marking the masters of mountpoints we are attaching the copies to. Either we are in a peer of the last mountpoint we'd dealt with, or we have the following situation: we are attaching to mountpoint M, the last copy S_0 had been attached to M_0 and there are sequences S_0...S_n, M_0...M_n such that S_{i+1} is a master of S_{i}, S_{i} mounted on M{i} and we need to create a slave of the first S_{k} such that M is getting propagation from M_{k}. It means that the master of M_{k} will be among the sequence of masters of M. On the other hand, the nearest marked node in that sequence will either be the master of M_{k} or the master of M_{k-1} (the latter - in the case if M_{k-1} is a slave of something M gets propagation from, but in a wrong peer group). So we go through the sequence of masters of M until we find a marked one (P). Let N be the one before it. Then we go through the sequence of masters of S_0 until we find one (say, S) mounted on a node D that has P as master and check if D is a peer of N. If it is, S will be the master of new copy, if not - the master of S will be. That's it for the hard part; the rest is fairly simple. Iterator is in next_group(), handling of one prospective mountpoint is propagate_one(). It seems to survive all tests and gives a noticably better performance than the current mainline for setups that are seriously using shared subtrees. Cc: stable@vger.kernel.org Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2014-02-27 14:35:45 +00:00
mnt_flags &= ~MNT_INTERNAL_FLAGS;
if (unlikely(!check_mnt(parent))) {
/* that's acceptable only for automounts done in private ns */
if (!(mnt_flags & MNT_SHRINKABLE))
return -EINVAL;
/* ... and for those we'd better have mountpoint still alive */
if (!parent->mnt_ns)
return -EINVAL;
}
/* Refuse the same filesystem on the same mount point */
if (path->mnt->mnt_sb == newmnt->mnt.mnt_sb && path_mounted(path))
return -EBUSY;
VFS: (Scripted) Convert S_ISLNK/DIR/REG(dentry->d_inode) to d_is_*(dentry) Convert the following where appropriate: (1) S_ISLNK(dentry->d_inode) to d_is_symlink(dentry). (2) S_ISREG(dentry->d_inode) to d_is_reg(dentry). (3) S_ISDIR(dentry->d_inode) to d_is_dir(dentry). This is actually more complicated than it appears as some calls should be converted to d_can_lookup() instead. The difference is whether the directory in question is a real dir with a ->lookup op or whether it's a fake dir with a ->d_automount op. In some circumstances, we can subsume checks for dentry->d_inode not being NULL into this, provided we the code isn't in a filesystem that expects d_inode to be NULL if the dirent really *is* negative (ie. if we're going to use d_inode() rather than d_backing_inode() to get the inode pointer). Note that the dentry type field may be set to something other than DCACHE_MISS_TYPE when d_inode is NULL in the case of unionmount, where the VFS manages the fall-through from a negative dentry to a lower layer. In such a case, the dentry type of the negative union dentry is set to the same as the type of the lower dentry. However, if you know d_inode is not NULL at the call site, then you can use the d_is_xxx() functions even in a filesystem. There is one further complication: a 0,0 chardev dentry may be labelled DCACHE_WHITEOUT_TYPE rather than DCACHE_SPECIAL_TYPE. Strictly, this was intended for special directory entry types that don't have attached inodes. The following perl+coccinelle script was used: use strict; my @callers; open($fd, 'git grep -l \'S_IS[A-Z].*->d_inode\' |') || die "Can't grep for S_ISDIR and co. callers"; @callers = <$fd>; close($fd); unless (@callers) { print "No matches\n"; exit(0); } my @cocci = ( '@@', 'expression E;', '@@', '', '- S_ISLNK(E->d_inode->i_mode)', '+ d_is_symlink(E)', '', '@@', 'expression E;', '@@', '', '- S_ISDIR(E->d_inode->i_mode)', '+ d_is_dir(E)', '', '@@', 'expression E;', '@@', '', '- S_ISREG(E->d_inode->i_mode)', '+ d_is_reg(E)' ); my $coccifile = "tmp.sp.cocci"; open($fd, ">$coccifile") || die $coccifile; print($fd "$_\n") || die $coccifile foreach (@cocci); close($fd); foreach my $file (@callers) { chomp $file; print "Processing ", $file, "\n"; system("spatch", "--sp-file", $coccifile, $file, "--in-place", "--no-show-diff") == 0 || die "spatch failed"; } [AV: overlayfs parts skipped] Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-01-29 12:02:35 +00:00
if (d_is_symlink(newmnt->mnt.mnt_root))
return -EINVAL;
newmnt->mnt.mnt_flags = mnt_flags;
return graft_tree(newmnt, parent, mp);
}
static bool mount_too_revealing(const struct super_block *sb, int *new_mnt_flags);
/*
* Create a new mount using a superblock configuration and request it
* be added to the namespace tree.
*/
static int do_new_mount_fc(struct fs_context *fc, struct path *mountpoint,
unsigned int mnt_flags)
{
struct vfsmount *mnt;
struct mountpoint *mp;
struct super_block *sb = fc->root->d_sb;
int error;
vfs_get_tree(): evict the call of security_sb_kern_mount() Right now vfs_get_tree() calls security_sb_kern_mount() (i.e. mount MAC) unless it gets MS_KERNMOUNT or MS_SUBMOUNT in flags. Doing it that way is both clumsy and imprecise. Consider the callers' tree of vfs_get_tree(): vfs_get_tree() <- do_new_mount() <- vfs_kern_mount() <- simple_pin_fs() <- vfs_submount() <- kern_mount_data() <- init_mount_tree() <- btrfs_mount() <- vfs_get_tree() <- nfs_do_root_mount() <- nfs4_try_mount() <- nfs_fs_mount() <- vfs_get_tree() <- nfs4_referral_mount() do_new_mount() always does need MAC (we are guaranteed that neither MS_KERNMOUNT nor MS_SUBMOUNT will be passed there). simple_pin_fs(), vfs_submount() and kern_mount_data() pass explicit flags inhibiting that check. So does nfs4_referral_mount() (the flags there are ulimately coming from vfs_submount()). init_mount_tree() is called too early for anything LSM-related; it doesn't matter whether we attempt those checks, they'll do nothing. Finally, in case of btrfs_mount() and nfs_fs_mount(), doing MAC is pointless - either the caller will do it, or the flags are such that we wouldn't have done it either. In other words, the one and only case when we want that check done is when we are called from do_new_mount(), and there we want it unconditionally. So let's simply move it there. The superblock is still locked, so nobody is going to get access to it (via ustat(2), etc.) until we get a chance to apply the checks - we are free to move them to any point up to where we drop ->s_umount (in do_new_mount_fc()). Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2018-12-20 20:04:50 +00:00
error = security_sb_kern_mount(sb);
if (!error && mount_too_revealing(sb, &mnt_flags))
error = -EPERM;
if (unlikely(error)) {
fc_drop_locked(fc);
return error;
}
up_write(&sb->s_umount);
mnt = vfs_create_mount(fc);
if (IS_ERR(mnt))
return PTR_ERR(mnt);
mnt_warn_timestamp_expiry(mountpoint, mnt);
mp = lock_mount(mountpoint);
if (IS_ERR(mp)) {
mntput(mnt);
return PTR_ERR(mp);
}
error = do_add_mount(real_mount(mnt), mp, mountpoint, mnt_flags);
unlock_mount(mp);
if (error < 0)
mntput(mnt);
return error;
}
/*
* create a new mount for userspace and request it to be added into the
* namespace's tree
*/
static int do_new_mount(struct path *path, const char *fstype, int sb_flags,
int mnt_flags, const char *name, void *data)
{
struct file_system_type *type;
struct fs_context *fc;
const char *subtype = NULL;
int err = 0;
if (!fstype)
return -EINVAL;
type = get_fs_type(fstype);
if (!type)
return -ENODEV;
if (type->fs_flags & FS_HAS_SUBTYPE) {
subtype = strchr(fstype, '.');
if (subtype) {
subtype++;
if (!*subtype) {
put_filesystem(type);
return -EINVAL;
}
}
}
fc = fs_context_for_mount(type, sb_flags);
put_filesystem(type);
if (IS_ERR(fc))
return PTR_ERR(fc);
/*
* Indicate to the filesystem that the mount request is coming
* from the legacy mount system call.
*/
fc->oldapi = true;
vfs: Implement a filesystem superblock creation/configuration context [AV - unfuck kern_mount_data(); we want non-NULL ->mnt_ns on long-living mounts] [AV - reordering fs/namespace.c is badly overdue, but let's keep it separate from that series] [AV - drop simple_pin_fs() change] [AV - clean vfs_kern_mount() failure exits up] Implement a filesystem context concept to be used during superblock creation for mount and superblock reconfiguration for remount. The mounting procedure then becomes: (1) Allocate new fs_context context. (2) Configure the context. (3) Create superblock. (4) Query the superblock. (5) Create a mount for the superblock. (6) Destroy the context. Rather than calling fs_type->mount(), an fs_context struct is created and fs_type->init_fs_context() is called to set it up. Pointers exist for the filesystem and LSM to hang their private data off. A set of operations has to be set by ->init_fs_context() to provide freeing, duplication, option parsing, binary data parsing, validation, mounting and superblock filling. Legacy filesystems are supported by the provision of a set of legacy fs_context operations that build up a list of mount options and then invoke fs_type->mount() from within the fs_context ->get_tree() operation. This allows all filesystems to be accessed using fs_context. It should be noted that, whilst this patch adds a lot of lines of code, there is quite a bit of duplication with existing code that can be eliminated should all filesystems be converted over. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2018-11-01 23:07:25 +00:00
if (subtype)
err = vfs_parse_fs_string(fc, "subtype",
subtype, strlen(subtype));
if (!err && name)
err = vfs_parse_fs_string(fc, "source", name, strlen(name));
if (!err)
err = parse_monolithic_mount_data(fc, data);
if (!err && !mount_capable(fc))
err = -EPERM;
if (!err)
err = vfs_get_tree(fc);
if (!err)
err = do_new_mount_fc(fc, path, mnt_flags);
put_fs_context(fc);
return err;
}
int finish_automount(struct vfsmount *m, const struct path *path)
{
fix automount/automount race properly Protection against automount/automount races (two threads hitting the same referral point at the same time) is based upon do_add_mount() prevention of identical overmounts - trying to overmount the root of mounted tree with the same tree fails with -EBUSY. It's unreliable (the other thread might've mounted something on top of the automount it has triggered) *and* causes no end of headache for follow_automount() and its caller, since finish_automount() behaves like do_new_mount() - if the mountpoint to be is overmounted, it mounts on top what's overmounting it. It's not only wrong (we want to go into what's overmounting the automount point and quietly discard what we planned to mount there), it introduces the possibility of original parent mount getting dropped. That's what 8aef18845266 (VFS: Fix vfsmount overput on simultaneous automount) deals with, but it can't do anything about the reliability of conflict detection - if something had been overmounted the other thread's automount (e.g. that other thread having stepped into automount in mount(2)), we don't get that -EBUSY and the result is referral point under automounted NFS under explicit overmount under another copy of automounted NFS What we need is finish_automount() *NOT* digging into overmounts - if it finds one, it should just quietly discard the thing it was asked to mount. And don't bother with actually crossing into the results of finish_automount() - the same loop that calls follow_automount() will do that just fine on the next iteration. IOW, instead of calling lock_mount() have finish_automount() do it manually, _without_ the "move into overmount and retry" part. And leave crossing into the results to the caller of follow_automount(), which simplifies it a lot. Moral: if you end up with a lot of glue working around the calling conventions of something, perhaps these calling conventions are simply wrong... Fixes: 8aef18845266 (VFS: Fix vfsmount overput on simultaneous automount) Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2020-01-11 15:44:29 +00:00
struct dentry *dentry = path->dentry;
struct mountpoint *mp;
struct mount *mnt;
int err;
if (!m)
return 0;
if (IS_ERR(m))
return PTR_ERR(m);
mnt = real_mount(m);
/* The new mount record should have at least 2 refs to prevent it being
* expired before we get a chance to add it
*/
BUG_ON(mnt_get_count(mnt) < 2);
if (m->mnt_sb == path->mnt->mnt_sb &&
fix automount/automount race properly Protection against automount/automount races (two threads hitting the same referral point at the same time) is based upon do_add_mount() prevention of identical overmounts - trying to overmount the root of mounted tree with the same tree fails with -EBUSY. It's unreliable (the other thread might've mounted something on top of the automount it has triggered) *and* causes no end of headache for follow_automount() and its caller, since finish_automount() behaves like do_new_mount() - if the mountpoint to be is overmounted, it mounts on top what's overmounting it. It's not only wrong (we want to go into what's overmounting the automount point and quietly discard what we planned to mount there), it introduces the possibility of original parent mount getting dropped. That's what 8aef18845266 (VFS: Fix vfsmount overput on simultaneous automount) deals with, but it can't do anything about the reliability of conflict detection - if something had been overmounted the other thread's automount (e.g. that other thread having stepped into automount in mount(2)), we don't get that -EBUSY and the result is referral point under automounted NFS under explicit overmount under another copy of automounted NFS What we need is finish_automount() *NOT* digging into overmounts - if it finds one, it should just quietly discard the thing it was asked to mount. And don't bother with actually crossing into the results of finish_automount() - the same loop that calls follow_automount() will do that just fine on the next iteration. IOW, instead of calling lock_mount() have finish_automount() do it manually, _without_ the "move into overmount and retry" part. And leave crossing into the results to the caller of follow_automount(), which simplifies it a lot. Moral: if you end up with a lot of glue working around the calling conventions of something, perhaps these calling conventions are simply wrong... Fixes: 8aef18845266 (VFS: Fix vfsmount overput on simultaneous automount) Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2020-01-11 15:44:29 +00:00
m->mnt_root == dentry) {
err = -ELOOP;
fix automount/automount race properly Protection against automount/automount races (two threads hitting the same referral point at the same time) is based upon do_add_mount() prevention of identical overmounts - trying to overmount the root of mounted tree with the same tree fails with -EBUSY. It's unreliable (the other thread might've mounted something on top of the automount it has triggered) *and* causes no end of headache for follow_automount() and its caller, since finish_automount() behaves like do_new_mount() - if the mountpoint to be is overmounted, it mounts on top what's overmounting it. It's not only wrong (we want to go into what's overmounting the automount point and quietly discard what we planned to mount there), it introduces the possibility of original parent mount getting dropped. That's what 8aef18845266 (VFS: Fix vfsmount overput on simultaneous automount) deals with, but it can't do anything about the reliability of conflict detection - if something had been overmounted the other thread's automount (e.g. that other thread having stepped into automount in mount(2)), we don't get that -EBUSY and the result is referral point under automounted NFS under explicit overmount under another copy of automounted NFS What we need is finish_automount() *NOT* digging into overmounts - if it finds one, it should just quietly discard the thing it was asked to mount. And don't bother with actually crossing into the results of finish_automount() - the same loop that calls follow_automount() will do that just fine on the next iteration. IOW, instead of calling lock_mount() have finish_automount() do it manually, _without_ the "move into overmount and retry" part. And leave crossing into the results to the caller of follow_automount(), which simplifies it a lot. Moral: if you end up with a lot of glue working around the calling conventions of something, perhaps these calling conventions are simply wrong... Fixes: 8aef18845266 (VFS: Fix vfsmount overput on simultaneous automount) Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2020-01-11 15:44:29 +00:00
goto discard;
}
fix automount/automount race properly Protection against automount/automount races (two threads hitting the same referral point at the same time) is based upon do_add_mount() prevention of identical overmounts - trying to overmount the root of mounted tree with the same tree fails with -EBUSY. It's unreliable (the other thread might've mounted something on top of the automount it has triggered) *and* causes no end of headache for follow_automount() and its caller, since finish_automount() behaves like do_new_mount() - if the mountpoint to be is overmounted, it mounts on top what's overmounting it. It's not only wrong (we want to go into what's overmounting the automount point and quietly discard what we planned to mount there), it introduces the possibility of original parent mount getting dropped. That's what 8aef18845266 (VFS: Fix vfsmount overput on simultaneous automount) deals with, but it can't do anything about the reliability of conflict detection - if something had been overmounted the other thread's automount (e.g. that other thread having stepped into automount in mount(2)), we don't get that -EBUSY and the result is referral point under automounted NFS under explicit overmount under another copy of automounted NFS What we need is finish_automount() *NOT* digging into overmounts - if it finds one, it should just quietly discard the thing it was asked to mount. And don't bother with actually crossing into the results of finish_automount() - the same loop that calls follow_automount() will do that just fine on the next iteration. IOW, instead of calling lock_mount() have finish_automount() do it manually, _without_ the "move into overmount and retry" part. And leave crossing into the results to the caller of follow_automount(), which simplifies it a lot. Moral: if you end up with a lot of glue working around the calling conventions of something, perhaps these calling conventions are simply wrong... Fixes: 8aef18845266 (VFS: Fix vfsmount overput on simultaneous automount) Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2020-01-11 15:44:29 +00:00
/*
* we don't want to use lock_mount() - in this case finding something
* that overmounts our mountpoint to be means "quitely drop what we've
* got", not "try to mount it on top".
*/
inode_lock(dentry->d_inode);
namespace_lock();
if (unlikely(cant_mount(dentry))) {
err = -ENOENT;
goto discard_locked;
}
fs: allow to mount beneath top mount Various distributions are adding or are in the process of adding support for system extensions and in the future configuration extensions through various tools. A more detailed explanation on system and configuration extensions can be found on the manpage which is listed below at [1]. System extension images may – dynamically at runtime — extend the /usr/ and /opt/ directory hierarchies with additional files. This is particularly useful on immutable system images where a /usr/ and/or /opt/ hierarchy residing on a read-only file system shall be extended temporarily at runtime without making any persistent modifications. When one or more system extension images are activated, their /usr/ and /opt/ hierarchies are combined via overlayfs with the same hierarchies of the host OS, and the host /usr/ and /opt/ overmounted with it ("merging"). When they are deactivated, the mount point is disassembled — again revealing the unmodified original host version of the hierarchy ("unmerging"). Merging thus makes the extension's resources suddenly appear below the /usr/ and /opt/ hierarchies as if they were included in the base OS image itself. Unmerging makes them disappear again, leaving in place only the files that were shipped with the base OS image itself. System configuration images are similar but operate on directories containing system or service configuration. On nearly all modern distributions mount propagation plays a crucial role and the rootfs of the OS is a shared mount in a peer group (usually with peer group id 1): TARGET SOURCE FSTYPE PROPAGATION MNT_ID PARENT_ID / / ext4 shared:1 29 1 On such systems all services and containers run in a separate mount namespace and are pivot_root()ed into their rootfs. A separate mount namespace is almost always used as it is the minimal isolation mechanism services have. But usually they are even much more isolated up to the point where they almost become indistinguishable from containers. Mount propagation again plays a crucial role here. The rootfs of all these services is a slave mount to the peer group of the host rootfs. This is done so the service will receive mount propagation events from the host when certain files or directories are updated. In addition, the rootfs of each service, container, and sandbox is also a shared mount in its separate peer group: TARGET SOURCE FSTYPE PROPAGATION MNT_ID PARENT_ID / / ext4 shared:24 master:1 71 47 For people not too familiar with mount propagation, the master:1 means that this is a slave mount to peer group 1. Which as one can see is the host rootfs as indicated by shared:1 above. The shared:24 indicates that the service rootfs is a shared mount in a separate peer group with peer group id 24. A service may run other services. Such nested services will also have a rootfs mount that is a slave to the peer group of the outer service rootfs mount. For containers things are just slighly different. A container's rootfs isn't a slave to the service's or host rootfs' peer group. The rootfs mount of a container is simply a shared mount in its own peer group: TARGET SOURCE FSTYPE PROPAGATION MNT_ID PARENT_ID /home/ubuntu/debian-tree / ext4 shared:99 61 60 So whereas services are isolated OS components a container is treated like a separate world and mount propagation into it is restricted to a single well known mount that is a slave to the peer group of the shared mount /run on the host: TARGET SOURCE FSTYPE PROPAGATION MNT_ID PARENT_ID /propagate/debian-tree /run/host/incoming tmpfs master:5 71 68 Here, the master:5 indicates that this mount is a slave to the peer group with peer group id 5. This allows to propagate mounts into the container and served as a workaround for not being able to insert mounts into mount namespaces directly. But the new mount api does support inserting mounts directly. For the interested reader the blogpost in [2] might be worth reading where I explain the old and the new approach to inserting mounts into mount namespaces. Containers of course, can themselves be run as services. They often run full systems themselves which means they again run services and containers with the exact same propagation settings explained above. The whole system is designed so that it can be easily updated, including all services in various fine-grained ways without having to enter every single service's mount namespace which would be prohibitively expensive. The mount propagation layout has been carefully chosen so it is possible to propagate updates for system extensions and configurations from the host into all services. The simplest model to update the whole system is to mount on top of /usr, /opt, or /etc on the host. The new mount on /usr, /opt, or /etc will then propagate into every service. This works cleanly the first time. However, when the system is updated multiple times it becomes necessary to unmount the first update on /opt, /usr, /etc and then propagate the new update. But this means, there's an interval where the old base system is accessible. This has to be avoided to protect against downgrade attacks. The vfs already exposes a mechanism to userspace whereby mounts can be mounted beneath an existing mount. Such mounts are internally referred to as "tucked". The patch series exposes the ability to mount beneath a top mount through the new MOVE_MOUNT_BENEATH flag for the move_mount() system call. This allows userspace to seamlessly upgrade mounts. After this series the only thing that will have changed is that mounting beneath an existing mount can be done explicitly instead of just implicitly. Today, there are two scenarios where a mount can be mounted beneath an existing mount instead of on top of it: (1) When a service or container is started in a new mount namespace and pivot_root()s into its new rootfs. The way this is done is by mounting the new rootfs beneath the old rootfs: fd_newroot = open("/var/lib/machines/fedora", ...); fd_oldroot = open("/", ...); fchdir(fd_newroot); pivot_root(".", "."); After the pivot_root(".", ".") call the new rootfs is mounted beneath the old rootfs which can then be unmounted to reveal the underlying mount: fchdir(fd_oldroot); umount2(".", MNT_DETACH); Since pivot_root() moves the caller into a new rootfs no mounts must be propagated out of the new rootfs as a consequence of the pivot_root() call. Thus, the mounts cannot be shared. (2) When a mount is propagated to a mount that already has another mount mounted on the same dentry. The easiest example for this is to create a new mount namespace. The following commands will create a mount namespace where the rootfs mount / will be a slave to the peer group of the host rootfs / mount's peer group. IOW, it will receive propagation from the host: mount --make-shared / unshare --mount --propagation=slave Now a new mount on the /mnt dentry in that mount namespace is created. (As it can be confusing it should be spelled out that the tmpfs mount on the /mnt dentry that was just created doesn't propagate back to the host because the rootfs mount / of the mount namespace isn't a peer of the host rootfs.): mount -t tmpfs tmpfs /mnt TARGET SOURCE FSTYPE PROPAGATION └─/mnt tmpfs tmpfs Now another terminal in the host mount namespace can observe that the mount indeed hasn't propagated back to into the host mount namespace. A new mount can now be created on top of the /mnt dentry with the rootfs mount / as its parent: mount --bind /opt /mnt TARGET SOURCE FSTYPE PROPAGATION └─/mnt /dev/sda2[/opt] ext4 shared:1 The mount namespace that was created earlier can now observe that the bind mount created on the host has propagated into it: TARGET SOURCE FSTYPE PROPAGATION └─/mnt /dev/sda2[/opt] ext4 master:1 └─/mnt tmpfs tmpfs But instead of having been mounted on top of the tmpfs mount at the /mnt dentry the /opt mount has been mounted on top of the rootfs mount at the /mnt dentry. And the tmpfs mount has been remounted on top of the propagated /opt mount at the /opt dentry. So in other words, the propagated mount has been mounted beneath the preexisting mount in that mount namespace. Mount namespaces make this easy to illustrate but it's also easy to mount beneath an existing mount in the same mount namespace (The following example assumes a shared rootfs mount / with peer group id 1): mount --bind /opt /opt TARGET SOURCE FSTYPE MNT_ID PARENT_ID PROPAGATION └─/opt /dev/sda2[/opt] ext4 188 29 shared:1 If another mount is mounted on top of the /opt mount at the /opt dentry: mount --bind /tmp /opt The following clunky mount tree will result: TARGET SOURCE FSTYPE MNT_ID PARENT_ID PROPAGATION └─/opt /dev/sda2[/tmp] ext4 405 29 shared:1 └─/opt /dev/sda2[/opt] ext4 188 405 shared:1 └─/opt /dev/sda2[/tmp] ext4 404 188 shared:1 The /tmp mount is mounted beneath the /opt mount and another copy is mounted on top of the /opt mount. This happens because the rootfs / and the /opt mount are shared mounts in the same peer group. When the new /tmp mount is supposed to be mounted at the /opt dentry then the /tmp mount first propagates to the root mount at the /opt dentry. But there already is the /opt mount mounted at the /opt dentry. So the old /opt mount at the /opt dentry will be mounted on top of the new /tmp mount at the /tmp dentry, i.e. @opt->mnt_parent is @tmp and @opt->mnt_mountpoint is /tmp (Note that @opt->mnt_root is /opt which is what shows up as /opt under SOURCE). So again, a mount will be mounted beneath a preexisting mount. (Fwiw, a few iterations of mount --bind /opt /opt in a loop on a shared rootfs is a good example of what could be referred to as mount explosion.) The main point is that such mounts allows userspace to umount a top mount and reveal an underlying mount. So for example, umounting the tmpfs mount on /mnt that was created in example (1) using mount namespaces reveals the /opt mount which was mounted beneath it. In (2) where a mount was mounted beneath the top mount in the same mount namespace unmounting the top mount would unmount both the top mount and the mount beneath. In the process the original mount would be remounted on top of the rootfs mount / at the /opt dentry again. This again, is a result of mount propagation only this time it's umount propagation. However, this can be avoided by simply making the parent mount / of the @opt mount a private or slave mount. Then the top mount and the original mount can be unmounted to reveal the mount beneath. These two examples are fairly arcane and are merely added to make it clear how mount propagation has effects on current and future features. More common use-cases will just be things like: mount -t btrfs /dev/sdA /mnt mount -t xfs /dev/sdB --beneath /mnt umount /mnt after which we'll have updated from a btrfs filesystem to a xfs filesystem without ever revealing the underlying mountpoint. The crux is that the proposed mechanism already exists and that it is so powerful as to cover cases where mounts are supposed to be updated with new versions. Crucially, it offers an important flexibility. Namely that updates to a system may either be forced or can be delayed and the umount of the top mount be left to a service if it is a cooperative one. This adds a new flag to move_mount() that allows to explicitly move a beneath the top mount adhering to the following semantics: * Mounts cannot be mounted beneath the rootfs. This restriction encompasses the rootfs but also chroots via chroot() and pivot_root(). To mount a mount beneath the rootfs or a chroot, pivot_root() can be used as illustrated above. * The source mount must be a private mount to force the kernel to allocate a new, unused peer group id. This isn't a required restriction but a voluntary one. It avoids repeating a semantical quirk that already exists today. If bind mounts which already have a peer group id are inserted into mount trees that have the same peer group id this can cause a lot of mount propagation events to be generated (For example, consider running mount --bind /opt /opt in a loop where the parent mount is a shared mount.). * Avoid getting rid of the top mount in the kernel. Cooperative services need to be able to unmount the top mount themselves. This also avoids a good deal of additional complexity. The umount would have to be propagated which would be another rather expensive operation. So namespace_lock() and lock_mount_hash() would potentially have to be held for a long time for both a mount and umount propagation. That should be avoided. * The path to mount beneath must be mounted and attached. * The top mount and its parent must be in the caller's mount namespace and the caller must be able to mount in that mount namespace. * The caller must be able to unmount the top mount to prove that they could reveal the underlying mount. * The propagation tree is calculated based on the destination mount's parent mount and the destination mount's mountpoint on the parent mount. Of course, if the parent of the destination mount and the destination mount are shared mounts in the same peer group and the mountpoint of the new mount to be mounted is a subdir of their ->mnt_root then both will receive a mount of /opt. That's probably easier to understand with an example. Assuming a standard shared rootfs /: mount --bind /opt /opt mount --bind /tmp /opt will cause the same mount tree as: mount --bind /opt /opt mount --beneath /tmp /opt because both / and /opt are shared mounts/peers in the same peer group and the /opt dentry is a subdirectory of both the parent's and the child's ->mnt_root. If a mount tree like that is created it almost always is an accident or abuse of mount propagation. Realistically what most people probably mean in this scenarios is: mount --bind /opt /opt mount --make-private /opt mount --make-shared /opt This forces the allocation of a new separate peer group for the /opt mount. Aferwards a mount --bind or mount --beneath actually makes sense as the / and /opt mount belong to different peer groups. Before that it's likely just confusion about what the user wanted to achieve. * Refuse MOVE_MOUNT_BENEATH if: (1) the @mnt_from has been overmounted in between path resolution and acquiring @namespace_sem when locking @mnt_to. This avoids the proliferation of shadow mounts. (2) if @to_mnt is moved to a different mountpoint while acquiring @namespace_sem to lock @to_mnt. (3) if @to_mnt is unmounted while acquiring @namespace_sem to lock @to_mnt. (4) if the parent of the target mount propagates to the target mount at the same mountpoint. This would mean mounting @mnt_from on @mnt_to->mnt_parent and then propagating a copy @c of @mnt_from onto @mnt_to. This defeats the whole purpose of mounting @mnt_from beneath @mnt_to. (5) if the parent mount @mnt_to->mnt_parent propagates to @mnt_from at the same mountpoint. If @mnt_to->mnt_parent propagates to @mnt_from this would mean propagating a copy @c of @mnt_from on top of @mnt_from. Afterwards @mnt_from would be mounted on top of @mnt_to->mnt_parent and @mnt_to would be unmounted from @mnt->mnt_parent and remounted on @mnt_from. But since @c is already mounted on @mnt_from, @mnt_to would ultimately be remounted on top of @c. Afterwards, @mnt_from would be covered by a copy @c of @mnt_from and @c would be covered by @mnt_from itself. This defeats the whole purpose of mounting @mnt_from beneath @mnt_to. Cases (1) to (3) are required as they deal with races that would cause bugs or unexpected behavior for users. Cases (4) and (5) refuse semantical quirks that would not be a bug but would cause weird mount trees to be created. While they can already be created via other means (mount --bind /opt /opt x n) there's no reason to repeat past mistakes in new features. Link: https://man7.org/linux/man-pages/man8/systemd-sysext.8.html [1] Link: https://brauner.io/2023/02/28/mounting-into-mount-namespaces.html [2] Link: https://github.com/flatcar/sysext-bakery Link: https://fedoraproject.org/wiki/Changes/Unified_Kernel_Support_Phase_1 Link: https://fedoraproject.org/wiki/Changes/Unified_Kernel_Support_Phase_2 Link: https://github.com/systemd/systemd/pull/26013 Reviewed-by: Seth Forshee (DigitalOcean) <sforshee@kernel.org> Message-Id: <20230202-fs-move-mount-replace-v4-4-98f3d80d7eaa@kernel.org> Signed-off-by: Christian Brauner <brauner@kernel.org>
2023-05-03 11:18:42 +00:00
if (path_overmounted(path)) {
fix automount/automount race properly Protection against automount/automount races (two threads hitting the same referral point at the same time) is based upon do_add_mount() prevention of identical overmounts - trying to overmount the root of mounted tree with the same tree fails with -EBUSY. It's unreliable (the other thread might've mounted something on top of the automount it has triggered) *and* causes no end of headache for follow_automount() and its caller, since finish_automount() behaves like do_new_mount() - if the mountpoint to be is overmounted, it mounts on top what's overmounting it. It's not only wrong (we want to go into what's overmounting the automount point and quietly discard what we planned to mount there), it introduces the possibility of original parent mount getting dropped. That's what 8aef18845266 (VFS: Fix vfsmount overput on simultaneous automount) deals with, but it can't do anything about the reliability of conflict detection - if something had been overmounted the other thread's automount (e.g. that other thread having stepped into automount in mount(2)), we don't get that -EBUSY and the result is referral point under automounted NFS under explicit overmount under another copy of automounted NFS What we need is finish_automount() *NOT* digging into overmounts - if it finds one, it should just quietly discard the thing it was asked to mount. And don't bother with actually crossing into the results of finish_automount() - the same loop that calls follow_automount() will do that just fine on the next iteration. IOW, instead of calling lock_mount() have finish_automount() do it manually, _without_ the "move into overmount and retry" part. And leave crossing into the results to the caller of follow_automount(), which simplifies it a lot. Moral: if you end up with a lot of glue working around the calling conventions of something, perhaps these calling conventions are simply wrong... Fixes: 8aef18845266 (VFS: Fix vfsmount overput on simultaneous automount) Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2020-01-11 15:44:29 +00:00
err = 0;
goto discard_locked;
}
mp = get_mountpoint(dentry);
if (IS_ERR(mp)) {
err = PTR_ERR(mp);
fix automount/automount race properly Protection against automount/automount races (two threads hitting the same referral point at the same time) is based upon do_add_mount() prevention of identical overmounts - trying to overmount the root of mounted tree with the same tree fails with -EBUSY. It's unreliable (the other thread might've mounted something on top of the automount it has triggered) *and* causes no end of headache for follow_automount() and its caller, since finish_automount() behaves like do_new_mount() - if the mountpoint to be is overmounted, it mounts on top what's overmounting it. It's not only wrong (we want to go into what's overmounting the automount point and quietly discard what we planned to mount there), it introduces the possibility of original parent mount getting dropped. That's what 8aef18845266 (VFS: Fix vfsmount overput on simultaneous automount) deals with, but it can't do anything about the reliability of conflict detection - if something had been overmounted the other thread's automount (e.g. that other thread having stepped into automount in mount(2)), we don't get that -EBUSY and the result is referral point under automounted NFS under explicit overmount under another copy of automounted NFS What we need is finish_automount() *NOT* digging into overmounts - if it finds one, it should just quietly discard the thing it was asked to mount. And don't bother with actually crossing into the results of finish_automount() - the same loop that calls follow_automount() will do that just fine on the next iteration. IOW, instead of calling lock_mount() have finish_automount() do it manually, _without_ the "move into overmount and retry" part. And leave crossing into the results to the caller of follow_automount(), which simplifies it a lot. Moral: if you end up with a lot of glue working around the calling conventions of something, perhaps these calling conventions are simply wrong... Fixes: 8aef18845266 (VFS: Fix vfsmount overput on simultaneous automount) Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2020-01-11 15:44:29 +00:00
goto discard_locked;
}
fix automount/automount race properly Protection against automount/automount races (two threads hitting the same referral point at the same time) is based upon do_add_mount() prevention of identical overmounts - trying to overmount the root of mounted tree with the same tree fails with -EBUSY. It's unreliable (the other thread might've mounted something on top of the automount it has triggered) *and* causes no end of headache for follow_automount() and its caller, since finish_automount() behaves like do_new_mount() - if the mountpoint to be is overmounted, it mounts on top what's overmounting it. It's not only wrong (we want to go into what's overmounting the automount point and quietly discard what we planned to mount there), it introduces the possibility of original parent mount getting dropped. That's what 8aef18845266 (VFS: Fix vfsmount overput on simultaneous automount) deals with, but it can't do anything about the reliability of conflict detection - if something had been overmounted the other thread's automount (e.g. that other thread having stepped into automount in mount(2)), we don't get that -EBUSY and the result is referral point under automounted NFS under explicit overmount under another copy of automounted NFS What we need is finish_automount() *NOT* digging into overmounts - if it finds one, it should just quietly discard the thing it was asked to mount. And don't bother with actually crossing into the results of finish_automount() - the same loop that calls follow_automount() will do that just fine on the next iteration. IOW, instead of calling lock_mount() have finish_automount() do it manually, _without_ the "move into overmount and retry" part. And leave crossing into the results to the caller of follow_automount(), which simplifies it a lot. Moral: if you end up with a lot of glue working around the calling conventions of something, perhaps these calling conventions are simply wrong... Fixes: 8aef18845266 (VFS: Fix vfsmount overput on simultaneous automount) Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2020-01-11 15:44:29 +00:00
err = do_add_mount(mnt, mp, path, path->mnt->mnt_flags | MNT_SHRINKABLE);
unlock_mount(mp);
fix automount/automount race properly Protection against automount/automount races (two threads hitting the same referral point at the same time) is based upon do_add_mount() prevention of identical overmounts - trying to overmount the root of mounted tree with the same tree fails with -EBUSY. It's unreliable (the other thread might've mounted something on top of the automount it has triggered) *and* causes no end of headache for follow_automount() and its caller, since finish_automount() behaves like do_new_mount() - if the mountpoint to be is overmounted, it mounts on top what's overmounting it. It's not only wrong (we want to go into what's overmounting the automount point and quietly discard what we planned to mount there), it introduces the possibility of original parent mount getting dropped. That's what 8aef18845266 (VFS: Fix vfsmount overput on simultaneous automount) deals with, but it can't do anything about the reliability of conflict detection - if something had been overmounted the other thread's automount (e.g. that other thread having stepped into automount in mount(2)), we don't get that -EBUSY and the result is referral point under automounted NFS under explicit overmount under another copy of automounted NFS What we need is finish_automount() *NOT* digging into overmounts - if it finds one, it should just quietly discard the thing it was asked to mount. And don't bother with actually crossing into the results of finish_automount() - the same loop that calls follow_automount() will do that just fine on the next iteration. IOW, instead of calling lock_mount() have finish_automount() do it manually, _without_ the "move into overmount and retry" part. And leave crossing into the results to the caller of follow_automount(), which simplifies it a lot. Moral: if you end up with a lot of glue working around the calling conventions of something, perhaps these calling conventions are simply wrong... Fixes: 8aef18845266 (VFS: Fix vfsmount overput on simultaneous automount) Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2020-01-11 15:44:29 +00:00
if (unlikely(err))
goto discard;
mntput(m);
return 0;
discard_locked:
namespace_unlock();
inode_unlock(dentry->d_inode);
discard:
/* remove m from any expiration list it may be on */
if (!list_empty(&mnt->mnt_expire)) {
namespace_lock();
list_del_init(&mnt->mnt_expire);
namespace_unlock();
}
mntput(m);
mntput(m);
return err;
}
/**
* mnt_set_expiry - Put a mount on an expiration list
* @mnt: The mount to list.
* @expiry_list: The list to add the mount to.
*/
void mnt_set_expiry(struct vfsmount *mnt, struct list_head *expiry_list)
{
namespace_lock();
list_add_tail(&real_mount(mnt)->mnt_expire, expiry_list);
namespace_unlock();
}
EXPORT_SYMBOL(mnt_set_expiry);
/*
* process a list of expirable mountpoints with the intent of discarding any
* mountpoints that aren't in use and haven't been touched since last we came
* here
*/
void mark_mounts_for_expiry(struct list_head *mounts)
{
struct mount *mnt, *next;
LIST_HEAD(graveyard);
if (list_empty(mounts))
return;
namespace_lock();
lock_mount_hash();
/* extract from the expiration list every vfsmount that matches the
* following criteria:
* - only referenced by its parent vfsmount
* - still marked for expiry (marked on the last call here; marks are
* cleared by mntput())
*/
list_for_each_entry_safe(mnt, next, mounts, mnt_expire) {
if (!xchg(&mnt->mnt_expiry_mark, 1) ||
propagate_mount_busy(mnt, 1))
continue;
list_move(&mnt->mnt_expire, &graveyard);
}
while (!list_empty(&graveyard)) {
mnt = list_first_entry(&graveyard, struct mount, mnt_expire);
touch_mnt_namespace(mnt->mnt_ns);
umount_tree(mnt, UMOUNT_PROPAGATE|UMOUNT_SYNC);
}
unlock_mount_hash();
namespace_unlock();
}
EXPORT_SYMBOL_GPL(mark_mounts_for_expiry);
/*
* Ripoff of 'select_parent()'
*
* search the list of submounts for a given mountpoint, and move any
* shrinkable submounts to the 'graveyard' list.
*/
static int select_submounts(struct mount *parent, struct list_head *graveyard)
{
struct mount *this_parent = parent;
struct list_head *next;
int found = 0;
repeat:
next = this_parent->mnt_mounts.next;
resume:
while (next != &this_parent->mnt_mounts) {
struct list_head *tmp = next;
struct mount *mnt = list_entry(tmp, struct mount, mnt_child);
next = tmp->next;
if (!(mnt->mnt.mnt_flags & MNT_SHRINKABLE))
continue;
/*
* Descend a level if the d_mounts list is non-empty.
*/
if (!list_empty(&mnt->mnt_mounts)) {
this_parent = mnt;
goto repeat;
}
if (!propagate_mount_busy(mnt, 1)) {
list_move_tail(&mnt->mnt_expire, graveyard);
found++;
}
}
/*
* All done at this level ... ascend and resume the search
*/
if (this_parent != parent) {
next = this_parent->mnt_child.next;
this_parent = this_parent->mnt_parent;
goto resume;
}
return found;
}
/*
* process a list of expirable mountpoints with the intent of discarding any
* submounts of a specific parent mountpoint
*
RCU'd vfsmounts * RCU-delayed freeing of vfsmounts * vfsmount_lock replaced with a seqlock (mount_lock) * sequence number from mount_lock is stored in nameidata->m_seq and used when we exit RCU mode * new vfsmount flag - MNT_SYNC_UMOUNT. Set by umount_tree() when its caller knows that vfsmount will have no surviving references. * synchronize_rcu() done between unlocking namespace_sem in namespace_unlock() and doing pending mntput(). * new helper: legitimize_mnt(mnt, seq). Checks the mount_lock sequence number against seq, then grabs reference to mnt. Then it rechecks mount_lock again to close the race and either returns success or drops the reference it has acquired. The subtle point is that in case of MNT_SYNC_UMOUNT we can simply decrement the refcount and sod off - aforementioned synchronize_rcu() makes sure that final mntput() won't come until we leave RCU mode. We need that, since we don't want to end up with some lazy pathwalk racing with umount() and stealing the final mntput() from it - caller of umount() may expect it to return only once the fs is shut down and we don't want to break that. In other cases (i.e. with MNT_SYNC_UMOUNT absent) we have to do full-blown mntput() in case of mount_lock sequence number mismatch happening just as we'd grabbed the reference, but in those cases we won't be stealing the final mntput() from anything that would care. * mntput_no_expire() doesn't lock anything on the fast path now. Incidentally, SMP and UP cases are handled the same way - no ifdefs there. * normal pathname resolution does *not* do any writes to mount_lock. It does, of course, bump the refcounts of vfsmount and dentry in the very end, but that's it. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-09-30 02:06:07 +00:00
* mount_lock must be held for write
*/
static void shrink_submounts(struct mount *mnt)
{
LIST_HEAD(graveyard);
struct mount *m;
/* extract submounts of 'mountpoint' from the expiration list */
while (select_submounts(mnt, &graveyard)) {
while (!list_empty(&graveyard)) {
m = list_first_entry(&graveyard, struct mount,
mnt_expire);
touch_mnt_namespace(m->mnt_ns);
umount_tree(m, UMOUNT_PROPAGATE|UMOUNT_SYNC);
}
}
}
static void *copy_mount_options(const void __user * data)
{
char *copy;
unsigned left, offset;
if (!data)
return NULL;
copy = kmalloc(PAGE_SIZE, GFP_KERNEL);
if (!copy)
return ERR_PTR(-ENOMEM);
left = copy_from_user(copy, data, PAGE_SIZE);
/*
* Not all architectures have an exact copy_from_user(). Resort to
* byte at a time.
*/
offset = PAGE_SIZE - left;
while (left) {
char c;
if (get_user(c, (const char __user *)data + offset))
break;
copy[offset] = c;
left--;
offset++;
}
if (left == PAGE_SIZE) {
kfree(copy);
return ERR_PTR(-EFAULT);
}
return copy;
}
static char *copy_mount_string(const void __user *data)
{
return data ? strndup_user(data, PATH_MAX) : NULL;
}
/*
* Flags is a 32-bit value that allows up to 31 non-fs dependent flags to
* be given to the mount() call (ie: read-only, no-dev, no-suid etc).
*
* data is a (void *) that can point to any structure up to
* PAGE_SIZE-1 bytes, which can contain arbitrary fs-dependent
* information (or be NULL).
*
* Pre-0.97 versions of mount() didn't have a flags word.
* When the flags word was introduced its top half was required
* to have the magic value 0xC0ED, and this remained so until 2.4.0-test9.
* Therefore, if this magic number is present, it carries no information
* and must be discarded.
*/
int path_mount(const char *dev_name, struct path *path,
const char *type_page, unsigned long flags, void *data_page)
{
unsigned int mnt_flags = 0, sb_flags;
int ret;
/* Discard magic */
if ((flags & MS_MGC_MSK) == MS_MGC_VAL)
flags &= ~MS_MGC_MSK;
/* Basic sanity checks */
if (data_page)
((char *)data_page)[PAGE_SIZE - 1] = 0;
if (flags & MS_NOUSER)
return -EINVAL;
ret = security_sb_mount(dev_name, path, type_page, flags, data_page);
if (ret)
return ret;
if (!may_mount())
return -EPERM;
if (flags & SB_MANDLOCK)
warn_mandlock();
/* Default to relatime unless overriden */
if (!(flags & MS_NOATIME))
mnt_flags |= MNT_RELATIME;
/* Separate the per-mountpoint flags */
if (flags & MS_NOSUID)
mnt_flags |= MNT_NOSUID;
if (flags & MS_NODEV)
mnt_flags |= MNT_NODEV;
if (flags & MS_NOEXEC)
mnt_flags |= MNT_NOEXEC;
if (flags & MS_NOATIME)
mnt_flags |= MNT_NOATIME;
if (flags & MS_NODIRATIME)
mnt_flags |= MNT_NODIRATIME;
if (flags & MS_STRICTATIME)
mnt_flags &= ~(MNT_RELATIME | MNT_NOATIME);
if (flags & MS_RDONLY)
mnt_flags |= MNT_READONLY;
if (flags & MS_NOSYMFOLLOW)
mnt_flags |= MNT_NOSYMFOLLOW;
/* The default atime for remount is preservation */
if ((flags & MS_REMOUNT) &&
((flags & (MS_NOATIME | MS_NODIRATIME | MS_RELATIME |
MS_STRICTATIME)) == 0)) {
mnt_flags &= ~MNT_ATIME_MASK;
mnt_flags |= path->mnt->mnt_flags & MNT_ATIME_MASK;
}
sb_flags = flags & (SB_RDONLY |
SB_SYNCHRONOUS |
SB_MANDLOCK |
SB_DIRSYNC |
SB_SILENT |
SB_POSIXACL |
SB_LAZYTIME |
SB_I_VERSION);
if ((flags & (MS_REMOUNT | MS_BIND)) == (MS_REMOUNT | MS_BIND))
return do_reconfigure_mnt(path, mnt_flags);
if (flags & MS_REMOUNT)
return do_remount(path, flags, sb_flags, mnt_flags, data_page);
if (flags & MS_BIND)
return do_loopback(path, dev_name, flags & MS_REC);
if (flags & (MS_SHARED | MS_PRIVATE | MS_SLAVE | MS_UNBINDABLE))
return do_change_type(path, flags);
if (flags & MS_MOVE)
return do_move_mount_old(path, dev_name);
return do_new_mount(path, type_page, sb_flags, mnt_flags, dev_name,
data_page);
}
long do_mount(const char *dev_name, const char __user *dir_name,
const char *type_page, unsigned long flags, void *data_page)
{
struct path path;
int ret;
ret = user_path_at(AT_FDCWD, dir_name, LOOKUP_FOLLOW, &path);
if (ret)
return ret;
ret = path_mount(dev_name, &path, type_page, flags, data_page);
path_put(&path);
return ret;
}
static struct ucounts *inc_mnt_namespaces(struct user_namespace *ns)
{
return inc_ucount(ns, current_euid(), UCOUNT_MNT_NAMESPACES);
}
static void dec_mnt_namespaces(struct ucounts *ucounts)
{
dec_ucount(ucounts, UCOUNT_MNT_NAMESPACES);
}
static void free_mnt_ns(struct mnt_namespace *ns)
{
if (!is_anon_ns(ns))
ns_free_inum(&ns->ns);
dec_mnt_namespaces(ns->ucounts);
mnt_ns_tree_remove(ns);
}
/*
* Assign a sequence number so we can detect when we attempt to bind
* mount a reference to an older mount namespace into the current
* mount namespace, preventing reference counting loops. A 64bit
* number incrementing at 10Ghz will take 12,427 years to wrap which
* is effectively never, so we can ignore the possibility.
*/
static atomic64_t mnt_ns_seq = ATOMIC64_INIT(1);
static struct mnt_namespace *alloc_mnt_ns(struct user_namespace *user_ns, bool anon)
{
struct mnt_namespace *new_ns;
struct ucounts *ucounts;
int ret;
ucounts = inc_mnt_namespaces(user_ns);
if (!ucounts)
return ERR_PTR(-ENOSPC);
memcg: enable accounting for new namesapces and struct nsproxy Container admin can create new namespaces and force kernel to allocate up to several pages of memory for the namespaces and its associated structures. Net and uts namespaces have enabled accounting for such allocations. It makes sense to account for rest ones to restrict the host's memory consumption from inside the memcg-limited container. Link: https://lkml.kernel.org/r/5525bcbf-533e-da27-79b7-158686c64e13@virtuozzo.com Signed-off-by: Vasily Averin <vvs@virtuozzo.com> Acked-by: Serge Hallyn <serge@hallyn.com> Acked-by: Christian Brauner <christian.brauner@ubuntu.com> Acked-by: Kirill Tkhai <ktkhai@virtuozzo.com> Reviewed-by: Shakeel Butt <shakeelb@google.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Andrei Vagin <avagin@gmail.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Borislav Petkov <bp@suse.de> Cc: Dmitry Safonov <0x7f454c46@gmail.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: "J. Bruce Fields" <bfields@fieldses.org> Cc: Jeff Layton <jlayton@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jiri Slaby <jirislaby@kernel.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Roman Gushchin <guro@fb.com> Cc: Tejun Heo <tj@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Yutian Yang <nglaive@gmail.com> Cc: Zefan Li <lizefan.x@bytedance.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-02 21:55:27 +00:00
new_ns = kzalloc(sizeof(struct mnt_namespace), GFP_KERNEL_ACCOUNT);
if (!new_ns) {
dec_mnt_namespaces(ucounts);
return ERR_PTR(-ENOMEM);
}
if (!anon) {
ret = ns_alloc_inum(&new_ns->ns);
if (ret) {
kfree(new_ns);
dec_mnt_namespaces(ucounts);
return ERR_PTR(ret);
}
}
new_ns->ns.ops = &mntns_operations;
if (!anon)
new_ns->seq = atomic64_add_return(1, &mnt_ns_seq);
mnt: Use generic ns_common::count Switch over mount namespaces to use the newly introduced common lifetime counter. Currently every namespace type has its own lifetime counter which is stored in the specific namespace struct. The lifetime counters are used identically for all namespaces types. Namespaces may of course have additional unrelated counters and these are not altered. This introduces a common lifetime counter into struct ns_common. The ns_common struct encompasses information that all namespaces share. That should include the lifetime counter since its common for all of them. It also allows us to unify the type of the counters across all namespaces. Most of them use refcount_t but one uses atomic_t and at least one uses kref. Especially the last one doesn't make much sense since it's just a wrapper around refcount_t since 2016 and actually complicates cleanup operations by having to use container_of() to cast the correct namespace struct out of struct ns_common. Having the lifetime counter for the namespaces in one place reduces maintenance cost. Not just because after switching all namespaces over we will have removed more code than we added but also because the logic is more easily understandable and we indicate to the user that the basic lifetime requirements for all namespaces are currently identical. Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com> Reviewed-by: Kees Cook <keescook@chromium.org> Acked-by: Christian Brauner <christian.brauner@ubuntu.com> Link: https://lore.kernel.org/r/159644980287.604812.761686947449081169.stgit@localhost.localdomain Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
2020-08-03 10:16:42 +00:00
refcount_set(&new_ns->ns.count, 1);
refcount_set(&new_ns->passive, 1);
new_ns->mounts = RB_ROOT;
RB_CLEAR_NODE(&new_ns->mnt_ns_tree_node);
init_waitqueue_head(&new_ns->poll);
new_ns->user_ns = get_user_ns(user_ns);
new_ns->ucounts = ucounts;
return new_ns;
}
__latent_entropy
struct mnt_namespace *copy_mnt_ns(unsigned long flags, struct mnt_namespace *ns,
struct user_namespace *user_ns, struct fs_struct *new_fs)
{
struct mnt_namespace *new_ns;
struct vfsmount *rootmnt = NULL, *pwdmnt = NULL;
struct mount *p, *q;
struct mount *old;
struct mount *new;
int copy_flags;
BUG_ON(!ns);
if (likely(!(flags & CLONE_NEWNS))) {
get_mnt_ns(ns);
return ns;
}
old = ns->root;
new_ns = alloc_mnt_ns(user_ns, false);
if (IS_ERR(new_ns))
return new_ns;
namespace_lock();
/* First pass: copy the tree topology */
copy_flags = CL_COPY_UNBINDABLE | CL_EXPIRE;
if (user_ns != ns->user_ns)
copy_flags |= CL_SHARED_TO_SLAVE;
new = copy_tree(old, old->mnt.mnt_root, copy_flags);
if (IS_ERR(new)) {
namespace_unlock();
ns_free_inum(&new_ns->ns);
dec_mnt_namespaces(new_ns->ucounts);
mnt_ns_release(new_ns);
return ERR_CAST(new);
}
if (user_ns != ns->user_ns) {
lock_mount_hash();
lock_mnt_tree(new);
unlock_mount_hash();
}
new_ns->root = new;
/*
* Second pass: switch the tsk->fs->* elements and mark new vfsmounts
* as belonging to new namespace. We have already acquired a private
* fs_struct, so tsk->fs->lock is not needed.
*/
p = old;
q = new;
while (p) {
mnt_add_to_ns(new_ns, q);
new_ns->nr_mounts++;
if (new_fs) {
if (&p->mnt == new_fs->root.mnt) {
new_fs->root.mnt = mntget(&q->mnt);
rootmnt = &p->mnt;
}
if (&p->mnt == new_fs->pwd.mnt) {
new_fs->pwd.mnt = mntget(&q->mnt);
pwdmnt = &p->mnt;
}
}
p = next_mnt(p, old);
q = next_mnt(q, new);
if (!q)
break;
// an mntns binding we'd skipped?
while (p->mnt.mnt_root != q->mnt.mnt_root)
p = next_mnt(skip_mnt_tree(p), old);
}
mnt_ns_tree_add(new_ns);
namespace_unlock();
if (rootmnt)
mntput(rootmnt);
if (pwdmnt)
mntput(pwdmnt);
return new_ns;
}
struct dentry *mount_subtree(struct vfsmount *m, const char *name)
{
struct mount *mnt = real_mount(m);
struct mnt_namespace *ns;
struct super_block *s;
struct path path;
int err;
ns = alloc_mnt_ns(&init_user_ns, true);
if (IS_ERR(ns)) {
mntput(m);
return ERR_CAST(ns);
}
ns->root = mnt;
ns->nr_mounts++;
mnt_add_to_ns(ns, mnt);
err = vfs_path_lookup(m->mnt_root, m,
name, LOOKUP_FOLLOW|LOOKUP_AUTOMOUNT, &path);
put_mnt_ns(ns);
if (err)
return ERR_PTR(err);
/* trade a vfsmount reference for active sb one */
s = path.mnt->mnt_sb;
atomic_inc(&s->s_active);
mntput(path.mnt);
/* lock the sucker */
down_write(&s->s_umount);
/* ... and return the root of (sub)tree on it */
return path.dentry;
}
EXPORT_SYMBOL(mount_subtree);
SYSCALL_DEFINE5(mount, char __user *, dev_name, char __user *, dir_name,
char __user *, type, unsigned long, flags, void __user *, data)
{
int ret;
char *kernel_type;
char *kernel_dev;
void *options;
kernel_type = copy_mount_string(type);
ret = PTR_ERR(kernel_type);
if (IS_ERR(kernel_type))
goto out_type;
kernel_dev = copy_mount_string(dev_name);
ret = PTR_ERR(kernel_dev);
if (IS_ERR(kernel_dev))
goto out_dev;
options = copy_mount_options(data);
ret = PTR_ERR(options);
if (IS_ERR(options))
goto out_data;
ret = do_mount(kernel_dev, dir_name, kernel_type, flags, options);
kfree(options);
out_data:
kfree(kernel_dev);
out_dev:
kfree(kernel_type);
out_type:
return ret;
}
#define FSMOUNT_VALID_FLAGS \
(MOUNT_ATTR_RDONLY | MOUNT_ATTR_NOSUID | MOUNT_ATTR_NODEV | \
MOUNT_ATTR_NOEXEC | MOUNT_ATTR__ATIME | MOUNT_ATTR_NODIRATIME | \
MOUNT_ATTR_NOSYMFOLLOW)
fs: introduce MOUNT_ATTR_IDMAP Introduce a new mount bind mount property to allow idmapping mounts. The MOUNT_ATTR_IDMAP flag can be set via the new mount_setattr() syscall together with a file descriptor referring to a user namespace. The user namespace referenced by the namespace file descriptor will be attached to the bind mount. All interactions with the filesystem going through that mount will be mapped according to the mapping specified in the user namespace attached to it. Using user namespaces to mark mounts means we can reuse all the existing infrastructure in the kernel that already exists to handle idmappings and can also use this for permission checking to allow unprivileged user to create idmapped mounts in the future. Idmapping a mount is decoupled from the caller's user and mount namespace. This means idmapped mounts can be created in the initial user namespace which is an important use-case for systemd-homed, portable usb-sticks between systems, sharing data between the initial user namespace and unprivileged containers, and other use-cases that have been brought up. For example, assume a home directory where all files are owned by uid and gid 1000 and the home directory is brought to a new laptop where the user has id 12345. The system administrator can simply create a mount of this home directory with a mapping of 1000:12345:1 and other mappings to indicate the ids should be kept. (With this it is e.g. also possible to create idmapped mounts on the host with an identity mapping 1:1:100000 where the root user is not mapped. A user with root access that e.g. has been pivot rooted into such a mount on the host will be not be able to execute, read, write, or create files as root.) Given that mapping a mount is decoupled from the caller's user namespace a sufficiently privileged process such as a container manager can set up an idmapped mount for the container and the container can simply pivot root to it. There's no need for the container to do anything. The mount will appear correctly mapped independent of the user namespace the container uses. This means we don't need to mark a mount as idmappable. In order to create an idmapped mount the caller must currently be privileged in the user namespace of the superblock the mount belongs to. Once a mount has been idmapped we don't allow it to change its mapping. This keeps permission checking and life-cycle management simple. Users wanting to change the idmapped can always create a new detached mount with a different idmapping. Link: https://lore.kernel.org/r/20210121131959.646623-36-christian.brauner@ubuntu.com Cc: Christoph Hellwig <hch@lst.de> Cc: David Howells <dhowells@redhat.com> Cc: Mauricio Vásquez Bernal <mauricio@kinvolk.io> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: linux-fsdevel@vger.kernel.org Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
2021-01-21 13:19:54 +00:00
#define MOUNT_SETATTR_VALID_FLAGS (FSMOUNT_VALID_FLAGS | MOUNT_ATTR_IDMAP)
fs: add mount_setattr() This implements the missing mount_setattr() syscall. While the new mount api allows to change the properties of a superblock there is currently no way to change the properties of a mount or a mount tree using file descriptors which the new mount api is based on. In addition the old mount api has the restriction that mount options cannot be applied recursively. This hasn't changed since changing mount options on a per-mount basis was implemented in [1] and has been a frequent request not just for convenience but also for security reasons. The legacy mount syscall is unable to accommodate this behavior without introducing a whole new set of flags because MS_REC | MS_REMOUNT | MS_BIND | MS_RDONLY | MS_NOEXEC | [...] only apply the mount option to the topmost mount. Changing MS_REC to apply to the whole mount tree would mean introducing a significant uapi change and would likely cause significant regressions. The new mount_setattr() syscall allows to recursively clear and set mount options in one shot. Multiple calls to change mount options requesting the same changes are idempotent: int mount_setattr(int dfd, const char *path, unsigned flags, struct mount_attr *uattr, size_t usize); Flags to modify path resolution behavior are specified in the @flags argument. Currently, AT_EMPTY_PATH, AT_RECURSIVE, AT_SYMLINK_NOFOLLOW, and AT_NO_AUTOMOUNT are supported. If useful, additional lookup flags to restrict path resolution as introduced with openat2() might be supported in the future. The mount_setattr() syscall can be expected to grow over time and is designed with extensibility in mind. It follows the extensible syscall pattern we have used with other syscalls such as openat2(), clone3(), sched_{set,get}attr(), and others. The set of mount options is passed in the uapi struct mount_attr which currently has the following layout: struct mount_attr { __u64 attr_set; __u64 attr_clr; __u64 propagation; __u64 userns_fd; }; The @attr_set and @attr_clr members are used to clear and set mount options. This way a user can e.g. request that a set of flags is to be raised such as turning mounts readonly by raising MOUNT_ATTR_RDONLY in @attr_set while at the same time requesting that another set of flags is to be lowered such as removing noexec from a mount tree by specifying MOUNT_ATTR_NOEXEC in @attr_clr. Note, since the MOUNT_ATTR_<atime> values are an enum starting from 0, not a bitmap, users wanting to transition to a different atime setting cannot simply specify the atime setting in @attr_set, but must also specify MOUNT_ATTR__ATIME in the @attr_clr field. So we ensure that MOUNT_ATTR__ATIME can't be partially set in @attr_clr and that @attr_set can't have any atime bits set if MOUNT_ATTR__ATIME isn't set in @attr_clr. The @propagation field lets callers specify the propagation type of a mount tree. Propagation is a single property that has four different settings and as such is not really a flag argument but an enum. Specifically, it would be unclear what setting and clearing propagation settings in combination would amount to. The legacy mount() syscall thus forbids the combination of multiple propagation settings too. The goal is to keep the semantics of mount propagation somewhat simple as they are overly complex as it is. The @userns_fd field lets user specify a user namespace whose idmapping becomes the idmapping of the mount. This is implemented and explained in detail in the next patch. [1]: commit 2e4b7fcd9260 ("[PATCH] r/o bind mounts: honor mount writer counts at remount") Link: https://lore.kernel.org/r/20210121131959.646623-35-christian.brauner@ubuntu.com Cc: David Howells <dhowells@redhat.com> Cc: Aleksa Sarai <cyphar@cyphar.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: linux-fsdevel@vger.kernel.org Cc: linux-api@vger.kernel.org Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
2021-01-21 13:19:53 +00:00
#define MOUNT_SETATTR_PROPAGATION_FLAGS \
(MS_UNBINDABLE | MS_PRIVATE | MS_SLAVE | MS_SHARED)
static unsigned int attr_flags_to_mnt_flags(u64 attr_flags)
{
unsigned int mnt_flags = 0;
if (attr_flags & MOUNT_ATTR_RDONLY)
mnt_flags |= MNT_READONLY;
if (attr_flags & MOUNT_ATTR_NOSUID)
mnt_flags |= MNT_NOSUID;
if (attr_flags & MOUNT_ATTR_NODEV)
mnt_flags |= MNT_NODEV;
if (attr_flags & MOUNT_ATTR_NOEXEC)
mnt_flags |= MNT_NOEXEC;
if (attr_flags & MOUNT_ATTR_NODIRATIME)
mnt_flags |= MNT_NODIRATIME;
if (attr_flags & MOUNT_ATTR_NOSYMFOLLOW)
mnt_flags |= MNT_NOSYMFOLLOW;
return mnt_flags;
}
/*
* Create a kernel mount representation for a new, prepared superblock
* (specified by fs_fd) and attach to an open_tree-like file descriptor.
*/
SYSCALL_DEFINE3(fsmount, int, fs_fd, unsigned int, flags,
unsigned int, attr_flags)
{
struct mnt_namespace *ns;
struct fs_context *fc;
struct file *file;
struct path newmount;
struct mount *mnt;
struct fd f;
unsigned int mnt_flags = 0;
long ret;
if (!may_mount())
return -EPERM;
if ((flags & ~(FSMOUNT_CLOEXEC)) != 0)
return -EINVAL;
if (attr_flags & ~FSMOUNT_VALID_FLAGS)
return -EINVAL;
mnt_flags = attr_flags_to_mnt_flags(attr_flags);
switch (attr_flags & MOUNT_ATTR__ATIME) {
case MOUNT_ATTR_STRICTATIME:
break;
case MOUNT_ATTR_NOATIME:
mnt_flags |= MNT_NOATIME;
break;
case MOUNT_ATTR_RELATIME:
mnt_flags |= MNT_RELATIME;
break;
default:
return -EINVAL;
}
f = fdget(fs_fd);
if (!fd_file(f))
return -EBADF;
ret = -EINVAL;
if (fd_file(f)->f_op != &fscontext_fops)
goto err_fsfd;
fc = fd_file(f)->private_data;
ret = mutex_lock_interruptible(&fc->uapi_mutex);
if (ret < 0)
goto err_fsfd;
/* There must be a valid superblock or we can't mount it */
ret = -EINVAL;
if (!fc->root)
goto err_unlock;
ret = -EPERM;
if (mount_too_revealing(fc->root->d_sb, &mnt_flags)) {
pr_warn("VFS: Mount too revealing\n");
goto err_unlock;
}
ret = -EBUSY;
if (fc->phase != FS_CONTEXT_AWAITING_MOUNT)
goto err_unlock;
if (fc->sb_flags & SB_MANDLOCK)
warn_mandlock();
newmount.mnt = vfs_create_mount(fc);
if (IS_ERR(newmount.mnt)) {
ret = PTR_ERR(newmount.mnt);
goto err_unlock;
}
newmount.dentry = dget(fc->root);
newmount.mnt->mnt_flags = mnt_flags;
/* We've done the mount bit - now move the file context into more or
* less the same state as if we'd done an fspick(). We don't want to
* do any memory allocation or anything like that at this point as we
* don't want to have to handle any errors incurred.
*/
vfs_clean_context(fc);
ns = alloc_mnt_ns(current->nsproxy->mnt_ns->user_ns, true);
if (IS_ERR(ns)) {
ret = PTR_ERR(ns);
goto err_path;
}
mnt = real_mount(newmount.mnt);
ns->root = mnt;
ns->nr_mounts = 1;
mnt_add_to_ns(ns, mnt);
mntget(newmount.mnt);
/* Attach to an apparent O_PATH fd with a note that we need to unmount
* it, not just simply put it.
*/
file = dentry_open(&newmount, O_PATH, fc->cred);
if (IS_ERR(file)) {
dissolve_on_fput(newmount.mnt);
ret = PTR_ERR(file);
goto err_path;
}
file->f_mode |= FMODE_NEED_UNMOUNT;
ret = get_unused_fd_flags((flags & FSMOUNT_CLOEXEC) ? O_CLOEXEC : 0);
if (ret >= 0)
fd_install(ret, file);
else
fput(file);
err_path:
path_put(&newmount);
err_unlock:
mutex_unlock(&fc->uapi_mutex);
err_fsfd:
fdput(f);
return ret;
}
/*
* Move a mount from one place to another. In combination with
* fsopen()/fsmount() this is used to install a new mount and in combination
* with open_tree(OPEN_TREE_CLONE [| AT_RECURSIVE]) it can be used to copy
* a mount subtree.
*
* Note the flags value is a combination of MOVE_MOUNT_* flags.
*/
SYSCALL_DEFINE5(move_mount,
int, from_dfd, const char __user *, from_pathname,
int, to_dfd, const char __user *, to_pathname,
unsigned int, flags)
{
struct path from_path, to_path;
unsigned int lflags;
int ret = 0;
if (!may_mount())
return -EPERM;
if (flags & ~MOVE_MOUNT__MASK)
return -EINVAL;
fs: allow to mount beneath top mount Various distributions are adding or are in the process of adding support for system extensions and in the future configuration extensions through various tools. A more detailed explanation on system and configuration extensions can be found on the manpage which is listed below at [1]. System extension images may – dynamically at runtime — extend the /usr/ and /opt/ directory hierarchies with additional files. This is particularly useful on immutable system images where a /usr/ and/or /opt/ hierarchy residing on a read-only file system shall be extended temporarily at runtime without making any persistent modifications. When one or more system extension images are activated, their /usr/ and /opt/ hierarchies are combined via overlayfs with the same hierarchies of the host OS, and the host /usr/ and /opt/ overmounted with it ("merging"). When they are deactivated, the mount point is disassembled — again revealing the unmodified original host version of the hierarchy ("unmerging"). Merging thus makes the extension's resources suddenly appear below the /usr/ and /opt/ hierarchies as if they were included in the base OS image itself. Unmerging makes them disappear again, leaving in place only the files that were shipped with the base OS image itself. System configuration images are similar but operate on directories containing system or service configuration. On nearly all modern distributions mount propagation plays a crucial role and the rootfs of the OS is a shared mount in a peer group (usually with peer group id 1): TARGET SOURCE FSTYPE PROPAGATION MNT_ID PARENT_ID / / ext4 shared:1 29 1 On such systems all services and containers run in a separate mount namespace and are pivot_root()ed into their rootfs. A separate mount namespace is almost always used as it is the minimal isolation mechanism services have. But usually they are even much more isolated up to the point where they almost become indistinguishable from containers. Mount propagation again plays a crucial role here. The rootfs of all these services is a slave mount to the peer group of the host rootfs. This is done so the service will receive mount propagation events from the host when certain files or directories are updated. In addition, the rootfs of each service, container, and sandbox is also a shared mount in its separate peer group: TARGET SOURCE FSTYPE PROPAGATION MNT_ID PARENT_ID / / ext4 shared:24 master:1 71 47 For people not too familiar with mount propagation, the master:1 means that this is a slave mount to peer group 1. Which as one can see is the host rootfs as indicated by shared:1 above. The shared:24 indicates that the service rootfs is a shared mount in a separate peer group with peer group id 24. A service may run other services. Such nested services will also have a rootfs mount that is a slave to the peer group of the outer service rootfs mount. For containers things are just slighly different. A container's rootfs isn't a slave to the service's or host rootfs' peer group. The rootfs mount of a container is simply a shared mount in its own peer group: TARGET SOURCE FSTYPE PROPAGATION MNT_ID PARENT_ID /home/ubuntu/debian-tree / ext4 shared:99 61 60 So whereas services are isolated OS components a container is treated like a separate world and mount propagation into it is restricted to a single well known mount that is a slave to the peer group of the shared mount /run on the host: TARGET SOURCE FSTYPE PROPAGATION MNT_ID PARENT_ID /propagate/debian-tree /run/host/incoming tmpfs master:5 71 68 Here, the master:5 indicates that this mount is a slave to the peer group with peer group id 5. This allows to propagate mounts into the container and served as a workaround for not being able to insert mounts into mount namespaces directly. But the new mount api does support inserting mounts directly. For the interested reader the blogpost in [2] might be worth reading where I explain the old and the new approach to inserting mounts into mount namespaces. Containers of course, can themselves be run as services. They often run full systems themselves which means they again run services and containers with the exact same propagation settings explained above. The whole system is designed so that it can be easily updated, including all services in various fine-grained ways without having to enter every single service's mount namespace which would be prohibitively expensive. The mount propagation layout has been carefully chosen so it is possible to propagate updates for system extensions and configurations from the host into all services. The simplest model to update the whole system is to mount on top of /usr, /opt, or /etc on the host. The new mount on /usr, /opt, or /etc will then propagate into every service. This works cleanly the first time. However, when the system is updated multiple times it becomes necessary to unmount the first update on /opt, /usr, /etc and then propagate the new update. But this means, there's an interval where the old base system is accessible. This has to be avoided to protect against downgrade attacks. The vfs already exposes a mechanism to userspace whereby mounts can be mounted beneath an existing mount. Such mounts are internally referred to as "tucked". The patch series exposes the ability to mount beneath a top mount through the new MOVE_MOUNT_BENEATH flag for the move_mount() system call. This allows userspace to seamlessly upgrade mounts. After this series the only thing that will have changed is that mounting beneath an existing mount can be done explicitly instead of just implicitly. Today, there are two scenarios where a mount can be mounted beneath an existing mount instead of on top of it: (1) When a service or container is started in a new mount namespace and pivot_root()s into its new rootfs. The way this is done is by mounting the new rootfs beneath the old rootfs: fd_newroot = open("/var/lib/machines/fedora", ...); fd_oldroot = open("/", ...); fchdir(fd_newroot); pivot_root(".", "."); After the pivot_root(".", ".") call the new rootfs is mounted beneath the old rootfs which can then be unmounted to reveal the underlying mount: fchdir(fd_oldroot); umount2(".", MNT_DETACH); Since pivot_root() moves the caller into a new rootfs no mounts must be propagated out of the new rootfs as a consequence of the pivot_root() call. Thus, the mounts cannot be shared. (2) When a mount is propagated to a mount that already has another mount mounted on the same dentry. The easiest example for this is to create a new mount namespace. The following commands will create a mount namespace where the rootfs mount / will be a slave to the peer group of the host rootfs / mount's peer group. IOW, it will receive propagation from the host: mount --make-shared / unshare --mount --propagation=slave Now a new mount on the /mnt dentry in that mount namespace is created. (As it can be confusing it should be spelled out that the tmpfs mount on the /mnt dentry that was just created doesn't propagate back to the host because the rootfs mount / of the mount namespace isn't a peer of the host rootfs.): mount -t tmpfs tmpfs /mnt TARGET SOURCE FSTYPE PROPAGATION └─/mnt tmpfs tmpfs Now another terminal in the host mount namespace can observe that the mount indeed hasn't propagated back to into the host mount namespace. A new mount can now be created on top of the /mnt dentry with the rootfs mount / as its parent: mount --bind /opt /mnt TARGET SOURCE FSTYPE PROPAGATION └─/mnt /dev/sda2[/opt] ext4 shared:1 The mount namespace that was created earlier can now observe that the bind mount created on the host has propagated into it: TARGET SOURCE FSTYPE PROPAGATION └─/mnt /dev/sda2[/opt] ext4 master:1 └─/mnt tmpfs tmpfs But instead of having been mounted on top of the tmpfs mount at the /mnt dentry the /opt mount has been mounted on top of the rootfs mount at the /mnt dentry. And the tmpfs mount has been remounted on top of the propagated /opt mount at the /opt dentry. So in other words, the propagated mount has been mounted beneath the preexisting mount in that mount namespace. Mount namespaces make this easy to illustrate but it's also easy to mount beneath an existing mount in the same mount namespace (The following example assumes a shared rootfs mount / with peer group id 1): mount --bind /opt /opt TARGET SOURCE FSTYPE MNT_ID PARENT_ID PROPAGATION └─/opt /dev/sda2[/opt] ext4 188 29 shared:1 If another mount is mounted on top of the /opt mount at the /opt dentry: mount --bind /tmp /opt The following clunky mount tree will result: TARGET SOURCE FSTYPE MNT_ID PARENT_ID PROPAGATION └─/opt /dev/sda2[/tmp] ext4 405 29 shared:1 └─/opt /dev/sda2[/opt] ext4 188 405 shared:1 └─/opt /dev/sda2[/tmp] ext4 404 188 shared:1 The /tmp mount is mounted beneath the /opt mount and another copy is mounted on top of the /opt mount. This happens because the rootfs / and the /opt mount are shared mounts in the same peer group. When the new /tmp mount is supposed to be mounted at the /opt dentry then the /tmp mount first propagates to the root mount at the /opt dentry. But there already is the /opt mount mounted at the /opt dentry. So the old /opt mount at the /opt dentry will be mounted on top of the new /tmp mount at the /tmp dentry, i.e. @opt->mnt_parent is @tmp and @opt->mnt_mountpoint is /tmp (Note that @opt->mnt_root is /opt which is what shows up as /opt under SOURCE). So again, a mount will be mounted beneath a preexisting mount. (Fwiw, a few iterations of mount --bind /opt /opt in a loop on a shared rootfs is a good example of what could be referred to as mount explosion.) The main point is that such mounts allows userspace to umount a top mount and reveal an underlying mount. So for example, umounting the tmpfs mount on /mnt that was created in example (1) using mount namespaces reveals the /opt mount which was mounted beneath it. In (2) where a mount was mounted beneath the top mount in the same mount namespace unmounting the top mount would unmount both the top mount and the mount beneath. In the process the original mount would be remounted on top of the rootfs mount / at the /opt dentry again. This again, is a result of mount propagation only this time it's umount propagation. However, this can be avoided by simply making the parent mount / of the @opt mount a private or slave mount. Then the top mount and the original mount can be unmounted to reveal the mount beneath. These two examples are fairly arcane and are merely added to make it clear how mount propagation has effects on current and future features. More common use-cases will just be things like: mount -t btrfs /dev/sdA /mnt mount -t xfs /dev/sdB --beneath /mnt umount /mnt after which we'll have updated from a btrfs filesystem to a xfs filesystem without ever revealing the underlying mountpoint. The crux is that the proposed mechanism already exists and that it is so powerful as to cover cases where mounts are supposed to be updated with new versions. Crucially, it offers an important flexibility. Namely that updates to a system may either be forced or can be delayed and the umount of the top mount be left to a service if it is a cooperative one. This adds a new flag to move_mount() that allows to explicitly move a beneath the top mount adhering to the following semantics: * Mounts cannot be mounted beneath the rootfs. This restriction encompasses the rootfs but also chroots via chroot() and pivot_root(). To mount a mount beneath the rootfs or a chroot, pivot_root() can be used as illustrated above. * The source mount must be a private mount to force the kernel to allocate a new, unused peer group id. This isn't a required restriction but a voluntary one. It avoids repeating a semantical quirk that already exists today. If bind mounts which already have a peer group id are inserted into mount trees that have the same peer group id this can cause a lot of mount propagation events to be generated (For example, consider running mount --bind /opt /opt in a loop where the parent mount is a shared mount.). * Avoid getting rid of the top mount in the kernel. Cooperative services need to be able to unmount the top mount themselves. This also avoids a good deal of additional complexity. The umount would have to be propagated which would be another rather expensive operation. So namespace_lock() and lock_mount_hash() would potentially have to be held for a long time for both a mount and umount propagation. That should be avoided. * The path to mount beneath must be mounted and attached. * The top mount and its parent must be in the caller's mount namespace and the caller must be able to mount in that mount namespace. * The caller must be able to unmount the top mount to prove that they could reveal the underlying mount. * The propagation tree is calculated based on the destination mount's parent mount and the destination mount's mountpoint on the parent mount. Of course, if the parent of the destination mount and the destination mount are shared mounts in the same peer group and the mountpoint of the new mount to be mounted is a subdir of their ->mnt_root then both will receive a mount of /opt. That's probably easier to understand with an example. Assuming a standard shared rootfs /: mount --bind /opt /opt mount --bind /tmp /opt will cause the same mount tree as: mount --bind /opt /opt mount --beneath /tmp /opt because both / and /opt are shared mounts/peers in the same peer group and the /opt dentry is a subdirectory of both the parent's and the child's ->mnt_root. If a mount tree like that is created it almost always is an accident or abuse of mount propagation. Realistically what most people probably mean in this scenarios is: mount --bind /opt /opt mount --make-private /opt mount --make-shared /opt This forces the allocation of a new separate peer group for the /opt mount. Aferwards a mount --bind or mount --beneath actually makes sense as the / and /opt mount belong to different peer groups. Before that it's likely just confusion about what the user wanted to achieve. * Refuse MOVE_MOUNT_BENEATH if: (1) the @mnt_from has been overmounted in between path resolution and acquiring @namespace_sem when locking @mnt_to. This avoids the proliferation of shadow mounts. (2) if @to_mnt is moved to a different mountpoint while acquiring @namespace_sem to lock @to_mnt. (3) if @to_mnt is unmounted while acquiring @namespace_sem to lock @to_mnt. (4) if the parent of the target mount propagates to the target mount at the same mountpoint. This would mean mounting @mnt_from on @mnt_to->mnt_parent and then propagating a copy @c of @mnt_from onto @mnt_to. This defeats the whole purpose of mounting @mnt_from beneath @mnt_to. (5) if the parent mount @mnt_to->mnt_parent propagates to @mnt_from at the same mountpoint. If @mnt_to->mnt_parent propagates to @mnt_from this would mean propagating a copy @c of @mnt_from on top of @mnt_from. Afterwards @mnt_from would be mounted on top of @mnt_to->mnt_parent and @mnt_to would be unmounted from @mnt->mnt_parent and remounted on @mnt_from. But since @c is already mounted on @mnt_from, @mnt_to would ultimately be remounted on top of @c. Afterwards, @mnt_from would be covered by a copy @c of @mnt_from and @c would be covered by @mnt_from itself. This defeats the whole purpose of mounting @mnt_from beneath @mnt_to. Cases (1) to (3) are required as they deal with races that would cause bugs or unexpected behavior for users. Cases (4) and (5) refuse semantical quirks that would not be a bug but would cause weird mount trees to be created. While they can already be created via other means (mount --bind /opt /opt x n) there's no reason to repeat past mistakes in new features. Link: https://man7.org/linux/man-pages/man8/systemd-sysext.8.html [1] Link: https://brauner.io/2023/02/28/mounting-into-mount-namespaces.html [2] Link: https://github.com/flatcar/sysext-bakery Link: https://fedoraproject.org/wiki/Changes/Unified_Kernel_Support_Phase_1 Link: https://fedoraproject.org/wiki/Changes/Unified_Kernel_Support_Phase_2 Link: https://github.com/systemd/systemd/pull/26013 Reviewed-by: Seth Forshee (DigitalOcean) <sforshee@kernel.org> Message-Id: <20230202-fs-move-mount-replace-v4-4-98f3d80d7eaa@kernel.org> Signed-off-by: Christian Brauner <brauner@kernel.org>
2023-05-03 11:18:42 +00:00
if ((flags & (MOVE_MOUNT_BENEATH | MOVE_MOUNT_SET_GROUP)) ==
(MOVE_MOUNT_BENEATH | MOVE_MOUNT_SET_GROUP))
return -EINVAL;
/* If someone gives a pathname, they aren't permitted to move
* from an fd that requires unmount as we can't get at the flag
* to clear it afterwards.
*/
lflags = 0;
if (flags & MOVE_MOUNT_F_SYMLINKS) lflags |= LOOKUP_FOLLOW;
if (flags & MOVE_MOUNT_F_AUTOMOUNTS) lflags |= LOOKUP_AUTOMOUNT;
if (flags & MOVE_MOUNT_F_EMPTY_PATH) lflags |= LOOKUP_EMPTY;
ret = user_path_at(from_dfd, from_pathname, lflags, &from_path);
if (ret < 0)
return ret;
lflags = 0;
if (flags & MOVE_MOUNT_T_SYMLINKS) lflags |= LOOKUP_FOLLOW;
if (flags & MOVE_MOUNT_T_AUTOMOUNTS) lflags |= LOOKUP_AUTOMOUNT;
if (flags & MOVE_MOUNT_T_EMPTY_PATH) lflags |= LOOKUP_EMPTY;
ret = user_path_at(to_dfd, to_pathname, lflags, &to_path);
if (ret < 0)
goto out_from;
ret = security_move_mount(&from_path, &to_path);
if (ret < 0)
goto out_to;
move_mount: allow to add a mount into an existing group Previously a sharing group (shared and master ids pair) can be only inherited when mount is created via bindmount. This patch adds an ability to add an existing private mount into an existing sharing group. With this functionality one can first create the desired mount tree from only private mounts (without the need to care about undesired mount propagation or mount creation order implied by sharing group dependencies), and next then setup any desired mount sharing between those mounts in tree as needed. This allows CRIU to restore any set of mount namespaces, mount trees and sharing group trees for a container. We have many issues with restoring mounts in CRIU related to sharing groups and propagation: - reverse sharing groups vs mount tree order requires complex mounts reordering which mostly implies also using some temporary mounts (please see https://lkml.org/lkml/2021/3/23/569 for more info) - mount() syscall creates tons of mounts due to propagation - mount re-parenting due to propagation - "Mount Trap" due to propagation - "Non Uniform" propagation, meaning that with different tricks with mount order and temporary children-"lock" mounts one can create mount trees which can't be restored without those tricks (see https://www.linuxplumbersconf.org/event/7/contributions/640/) With this new functionality we can resolve all the problems with propagation at once. Link: https://lore.kernel.org/r/20210715100714.120228-1-ptikhomirov@virtuozzo.com Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Christian Brauner <christian.brauner@ubuntu.com> Cc: Mattias Nissler <mnissler@chromium.org> Cc: Aleksa Sarai <cyphar@cyphar.com> Cc: Andrei Vagin <avagin@gmail.com> Cc: linux-fsdevel@vger.kernel.org Cc: linux-api@vger.kernel.org Cc: lkml <linux-kernel@vger.kernel.org> Co-developed-by: Andrei Vagin <avagin@gmail.com> Acked-by: Christian Brauner <christian.brauner@ubuntu.com> Signed-off-by: Pavel Tikhomirov <ptikhomirov@virtuozzo.com> Signed-off-by: Andrei Vagin <avagin@gmail.com> Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
2021-07-15 10:07:13 +00:00
if (flags & MOVE_MOUNT_SET_GROUP)
ret = do_set_group(&from_path, &to_path);
else
fs: allow to mount beneath top mount Various distributions are adding or are in the process of adding support for system extensions and in the future configuration extensions through various tools. A more detailed explanation on system and configuration extensions can be found on the manpage which is listed below at [1]. System extension images may – dynamically at runtime — extend the /usr/ and /opt/ directory hierarchies with additional files. This is particularly useful on immutable system images where a /usr/ and/or /opt/ hierarchy residing on a read-only file system shall be extended temporarily at runtime without making any persistent modifications. When one or more system extension images are activated, their /usr/ and /opt/ hierarchies are combined via overlayfs with the same hierarchies of the host OS, and the host /usr/ and /opt/ overmounted with it ("merging"). When they are deactivated, the mount point is disassembled — again revealing the unmodified original host version of the hierarchy ("unmerging"). Merging thus makes the extension's resources suddenly appear below the /usr/ and /opt/ hierarchies as if they were included in the base OS image itself. Unmerging makes them disappear again, leaving in place only the files that were shipped with the base OS image itself. System configuration images are similar but operate on directories containing system or service configuration. On nearly all modern distributions mount propagation plays a crucial role and the rootfs of the OS is a shared mount in a peer group (usually with peer group id 1): TARGET SOURCE FSTYPE PROPAGATION MNT_ID PARENT_ID / / ext4 shared:1 29 1 On such systems all services and containers run in a separate mount namespace and are pivot_root()ed into their rootfs. A separate mount namespace is almost always used as it is the minimal isolation mechanism services have. But usually they are even much more isolated up to the point where they almost become indistinguishable from containers. Mount propagation again plays a crucial role here. The rootfs of all these services is a slave mount to the peer group of the host rootfs. This is done so the service will receive mount propagation events from the host when certain files or directories are updated. In addition, the rootfs of each service, container, and sandbox is also a shared mount in its separate peer group: TARGET SOURCE FSTYPE PROPAGATION MNT_ID PARENT_ID / / ext4 shared:24 master:1 71 47 For people not too familiar with mount propagation, the master:1 means that this is a slave mount to peer group 1. Which as one can see is the host rootfs as indicated by shared:1 above. The shared:24 indicates that the service rootfs is a shared mount in a separate peer group with peer group id 24. A service may run other services. Such nested services will also have a rootfs mount that is a slave to the peer group of the outer service rootfs mount. For containers things are just slighly different. A container's rootfs isn't a slave to the service's or host rootfs' peer group. The rootfs mount of a container is simply a shared mount in its own peer group: TARGET SOURCE FSTYPE PROPAGATION MNT_ID PARENT_ID /home/ubuntu/debian-tree / ext4 shared:99 61 60 So whereas services are isolated OS components a container is treated like a separate world and mount propagation into it is restricted to a single well known mount that is a slave to the peer group of the shared mount /run on the host: TARGET SOURCE FSTYPE PROPAGATION MNT_ID PARENT_ID /propagate/debian-tree /run/host/incoming tmpfs master:5 71 68 Here, the master:5 indicates that this mount is a slave to the peer group with peer group id 5. This allows to propagate mounts into the container and served as a workaround for not being able to insert mounts into mount namespaces directly. But the new mount api does support inserting mounts directly. For the interested reader the blogpost in [2] might be worth reading where I explain the old and the new approach to inserting mounts into mount namespaces. Containers of course, can themselves be run as services. They often run full systems themselves which means they again run services and containers with the exact same propagation settings explained above. The whole system is designed so that it can be easily updated, including all services in various fine-grained ways without having to enter every single service's mount namespace which would be prohibitively expensive. The mount propagation layout has been carefully chosen so it is possible to propagate updates for system extensions and configurations from the host into all services. The simplest model to update the whole system is to mount on top of /usr, /opt, or /etc on the host. The new mount on /usr, /opt, or /etc will then propagate into every service. This works cleanly the first time. However, when the system is updated multiple times it becomes necessary to unmount the first update on /opt, /usr, /etc and then propagate the new update. But this means, there's an interval where the old base system is accessible. This has to be avoided to protect against downgrade attacks. The vfs already exposes a mechanism to userspace whereby mounts can be mounted beneath an existing mount. Such mounts are internally referred to as "tucked". The patch series exposes the ability to mount beneath a top mount through the new MOVE_MOUNT_BENEATH flag for the move_mount() system call. This allows userspace to seamlessly upgrade mounts. After this series the only thing that will have changed is that mounting beneath an existing mount can be done explicitly instead of just implicitly. Today, there are two scenarios where a mount can be mounted beneath an existing mount instead of on top of it: (1) When a service or container is started in a new mount namespace and pivot_root()s into its new rootfs. The way this is done is by mounting the new rootfs beneath the old rootfs: fd_newroot = open("/var/lib/machines/fedora", ...); fd_oldroot = open("/", ...); fchdir(fd_newroot); pivot_root(".", "."); After the pivot_root(".", ".") call the new rootfs is mounted beneath the old rootfs which can then be unmounted to reveal the underlying mount: fchdir(fd_oldroot); umount2(".", MNT_DETACH); Since pivot_root() moves the caller into a new rootfs no mounts must be propagated out of the new rootfs as a consequence of the pivot_root() call. Thus, the mounts cannot be shared. (2) When a mount is propagated to a mount that already has another mount mounted on the same dentry. The easiest example for this is to create a new mount namespace. The following commands will create a mount namespace where the rootfs mount / will be a slave to the peer group of the host rootfs / mount's peer group. IOW, it will receive propagation from the host: mount --make-shared / unshare --mount --propagation=slave Now a new mount on the /mnt dentry in that mount namespace is created. (As it can be confusing it should be spelled out that the tmpfs mount on the /mnt dentry that was just created doesn't propagate back to the host because the rootfs mount / of the mount namespace isn't a peer of the host rootfs.): mount -t tmpfs tmpfs /mnt TARGET SOURCE FSTYPE PROPAGATION └─/mnt tmpfs tmpfs Now another terminal in the host mount namespace can observe that the mount indeed hasn't propagated back to into the host mount namespace. A new mount can now be created on top of the /mnt dentry with the rootfs mount / as its parent: mount --bind /opt /mnt TARGET SOURCE FSTYPE PROPAGATION └─/mnt /dev/sda2[/opt] ext4 shared:1 The mount namespace that was created earlier can now observe that the bind mount created on the host has propagated into it: TARGET SOURCE FSTYPE PROPAGATION └─/mnt /dev/sda2[/opt] ext4 master:1 └─/mnt tmpfs tmpfs But instead of having been mounted on top of the tmpfs mount at the /mnt dentry the /opt mount has been mounted on top of the rootfs mount at the /mnt dentry. And the tmpfs mount has been remounted on top of the propagated /opt mount at the /opt dentry. So in other words, the propagated mount has been mounted beneath the preexisting mount in that mount namespace. Mount namespaces make this easy to illustrate but it's also easy to mount beneath an existing mount in the same mount namespace (The following example assumes a shared rootfs mount / with peer group id 1): mount --bind /opt /opt TARGET SOURCE FSTYPE MNT_ID PARENT_ID PROPAGATION └─/opt /dev/sda2[/opt] ext4 188 29 shared:1 If another mount is mounted on top of the /opt mount at the /opt dentry: mount --bind /tmp /opt The following clunky mount tree will result: TARGET SOURCE FSTYPE MNT_ID PARENT_ID PROPAGATION └─/opt /dev/sda2[/tmp] ext4 405 29 shared:1 └─/opt /dev/sda2[/opt] ext4 188 405 shared:1 └─/opt /dev/sda2[/tmp] ext4 404 188 shared:1 The /tmp mount is mounted beneath the /opt mount and another copy is mounted on top of the /opt mount. This happens because the rootfs / and the /opt mount are shared mounts in the same peer group. When the new /tmp mount is supposed to be mounted at the /opt dentry then the /tmp mount first propagates to the root mount at the /opt dentry. But there already is the /opt mount mounted at the /opt dentry. So the old /opt mount at the /opt dentry will be mounted on top of the new /tmp mount at the /tmp dentry, i.e. @opt->mnt_parent is @tmp and @opt->mnt_mountpoint is /tmp (Note that @opt->mnt_root is /opt which is what shows up as /opt under SOURCE). So again, a mount will be mounted beneath a preexisting mount. (Fwiw, a few iterations of mount --bind /opt /opt in a loop on a shared rootfs is a good example of what could be referred to as mount explosion.) The main point is that such mounts allows userspace to umount a top mount and reveal an underlying mount. So for example, umounting the tmpfs mount on /mnt that was created in example (1) using mount namespaces reveals the /opt mount which was mounted beneath it. In (2) where a mount was mounted beneath the top mount in the same mount namespace unmounting the top mount would unmount both the top mount and the mount beneath. In the process the original mount would be remounted on top of the rootfs mount / at the /opt dentry again. This again, is a result of mount propagation only this time it's umount propagation. However, this can be avoided by simply making the parent mount / of the @opt mount a private or slave mount. Then the top mount and the original mount can be unmounted to reveal the mount beneath. These two examples are fairly arcane and are merely added to make it clear how mount propagation has effects on current and future features. More common use-cases will just be things like: mount -t btrfs /dev/sdA /mnt mount -t xfs /dev/sdB --beneath /mnt umount /mnt after which we'll have updated from a btrfs filesystem to a xfs filesystem without ever revealing the underlying mountpoint. The crux is that the proposed mechanism already exists and that it is so powerful as to cover cases where mounts are supposed to be updated with new versions. Crucially, it offers an important flexibility. Namely that updates to a system may either be forced or can be delayed and the umount of the top mount be left to a service if it is a cooperative one. This adds a new flag to move_mount() that allows to explicitly move a beneath the top mount adhering to the following semantics: * Mounts cannot be mounted beneath the rootfs. This restriction encompasses the rootfs but also chroots via chroot() and pivot_root(). To mount a mount beneath the rootfs or a chroot, pivot_root() can be used as illustrated above. * The source mount must be a private mount to force the kernel to allocate a new, unused peer group id. This isn't a required restriction but a voluntary one. It avoids repeating a semantical quirk that already exists today. If bind mounts which already have a peer group id are inserted into mount trees that have the same peer group id this can cause a lot of mount propagation events to be generated (For example, consider running mount --bind /opt /opt in a loop where the parent mount is a shared mount.). * Avoid getting rid of the top mount in the kernel. Cooperative services need to be able to unmount the top mount themselves. This also avoids a good deal of additional complexity. The umount would have to be propagated which would be another rather expensive operation. So namespace_lock() and lock_mount_hash() would potentially have to be held for a long time for both a mount and umount propagation. That should be avoided. * The path to mount beneath must be mounted and attached. * The top mount and its parent must be in the caller's mount namespace and the caller must be able to mount in that mount namespace. * The caller must be able to unmount the top mount to prove that they could reveal the underlying mount. * The propagation tree is calculated based on the destination mount's parent mount and the destination mount's mountpoint on the parent mount. Of course, if the parent of the destination mount and the destination mount are shared mounts in the same peer group and the mountpoint of the new mount to be mounted is a subdir of their ->mnt_root then both will receive a mount of /opt. That's probably easier to understand with an example. Assuming a standard shared rootfs /: mount --bind /opt /opt mount --bind /tmp /opt will cause the same mount tree as: mount --bind /opt /opt mount --beneath /tmp /opt because both / and /opt are shared mounts/peers in the same peer group and the /opt dentry is a subdirectory of both the parent's and the child's ->mnt_root. If a mount tree like that is created it almost always is an accident or abuse of mount propagation. Realistically what most people probably mean in this scenarios is: mount --bind /opt /opt mount --make-private /opt mount --make-shared /opt This forces the allocation of a new separate peer group for the /opt mount. Aferwards a mount --bind or mount --beneath actually makes sense as the / and /opt mount belong to different peer groups. Before that it's likely just confusion about what the user wanted to achieve. * Refuse MOVE_MOUNT_BENEATH if: (1) the @mnt_from has been overmounted in between path resolution and acquiring @namespace_sem when locking @mnt_to. This avoids the proliferation of shadow mounts. (2) if @to_mnt is moved to a different mountpoint while acquiring @namespace_sem to lock @to_mnt. (3) if @to_mnt is unmounted while acquiring @namespace_sem to lock @to_mnt. (4) if the parent of the target mount propagates to the target mount at the same mountpoint. This would mean mounting @mnt_from on @mnt_to->mnt_parent and then propagating a copy @c of @mnt_from onto @mnt_to. This defeats the whole purpose of mounting @mnt_from beneath @mnt_to. (5) if the parent mount @mnt_to->mnt_parent propagates to @mnt_from at the same mountpoint. If @mnt_to->mnt_parent propagates to @mnt_from this would mean propagating a copy @c of @mnt_from on top of @mnt_from. Afterwards @mnt_from would be mounted on top of @mnt_to->mnt_parent and @mnt_to would be unmounted from @mnt->mnt_parent and remounted on @mnt_from. But since @c is already mounted on @mnt_from, @mnt_to would ultimately be remounted on top of @c. Afterwards, @mnt_from would be covered by a copy @c of @mnt_from and @c would be covered by @mnt_from itself. This defeats the whole purpose of mounting @mnt_from beneath @mnt_to. Cases (1) to (3) are required as they deal with races that would cause bugs or unexpected behavior for users. Cases (4) and (5) refuse semantical quirks that would not be a bug but would cause weird mount trees to be created. While they can already be created via other means (mount --bind /opt /opt x n) there's no reason to repeat past mistakes in new features. Link: https://man7.org/linux/man-pages/man8/systemd-sysext.8.html [1] Link: https://brauner.io/2023/02/28/mounting-into-mount-namespaces.html [2] Link: https://github.com/flatcar/sysext-bakery Link: https://fedoraproject.org/wiki/Changes/Unified_Kernel_Support_Phase_1 Link: https://fedoraproject.org/wiki/Changes/Unified_Kernel_Support_Phase_2 Link: https://github.com/systemd/systemd/pull/26013 Reviewed-by: Seth Forshee (DigitalOcean) <sforshee@kernel.org> Message-Id: <20230202-fs-move-mount-replace-v4-4-98f3d80d7eaa@kernel.org> Signed-off-by: Christian Brauner <brauner@kernel.org>
2023-05-03 11:18:42 +00:00
ret = do_move_mount(&from_path, &to_path,
(flags & MOVE_MOUNT_BENEATH));
out_to:
path_put(&to_path);
out_from:
path_put(&from_path);
return ret;
}
/*
* Return true if path is reachable from root
*
RCU'd vfsmounts * RCU-delayed freeing of vfsmounts * vfsmount_lock replaced with a seqlock (mount_lock) * sequence number from mount_lock is stored in nameidata->m_seq and used when we exit RCU mode * new vfsmount flag - MNT_SYNC_UMOUNT. Set by umount_tree() when its caller knows that vfsmount will have no surviving references. * synchronize_rcu() done between unlocking namespace_sem in namespace_unlock() and doing pending mntput(). * new helper: legitimize_mnt(mnt, seq). Checks the mount_lock sequence number against seq, then grabs reference to mnt. Then it rechecks mount_lock again to close the race and either returns success or drops the reference it has acquired. The subtle point is that in case of MNT_SYNC_UMOUNT we can simply decrement the refcount and sod off - aforementioned synchronize_rcu() makes sure that final mntput() won't come until we leave RCU mode. We need that, since we don't want to end up with some lazy pathwalk racing with umount() and stealing the final mntput() from it - caller of umount() may expect it to return only once the fs is shut down and we don't want to break that. In other cases (i.e. with MNT_SYNC_UMOUNT absent) we have to do full-blown mntput() in case of mount_lock sequence number mismatch happening just as we'd grabbed the reference, but in those cases we won't be stealing the final mntput() from anything that would care. * mntput_no_expire() doesn't lock anything on the fast path now. Incidentally, SMP and UP cases are handled the same way - no ifdefs there. * normal pathname resolution does *not* do any writes to mount_lock. It does, of course, bump the refcounts of vfsmount and dentry in the very end, but that's it. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-09-30 02:06:07 +00:00
* namespace_sem or mount_lock is held
*/
bool is_path_reachable(struct mount *mnt, struct dentry *dentry,
const struct path *root)
{
while (&mnt->mnt != root->mnt && mnt_has_parent(mnt)) {
dentry = mnt->mnt_mountpoint;
mnt = mnt->mnt_parent;
}
return &mnt->mnt == root->mnt && is_subdir(dentry, root->dentry);
}
bool path_is_under(const struct path *path1, const struct path *path2)
{
bool res;
RCU'd vfsmounts * RCU-delayed freeing of vfsmounts * vfsmount_lock replaced with a seqlock (mount_lock) * sequence number from mount_lock is stored in nameidata->m_seq and used when we exit RCU mode * new vfsmount flag - MNT_SYNC_UMOUNT. Set by umount_tree() when its caller knows that vfsmount will have no surviving references. * synchronize_rcu() done between unlocking namespace_sem in namespace_unlock() and doing pending mntput(). * new helper: legitimize_mnt(mnt, seq). Checks the mount_lock sequence number against seq, then grabs reference to mnt. Then it rechecks mount_lock again to close the race and either returns success or drops the reference it has acquired. The subtle point is that in case of MNT_SYNC_UMOUNT we can simply decrement the refcount and sod off - aforementioned synchronize_rcu() makes sure that final mntput() won't come until we leave RCU mode. We need that, since we don't want to end up with some lazy pathwalk racing with umount() and stealing the final mntput() from it - caller of umount() may expect it to return only once the fs is shut down and we don't want to break that. In other cases (i.e. with MNT_SYNC_UMOUNT absent) we have to do full-blown mntput() in case of mount_lock sequence number mismatch happening just as we'd grabbed the reference, but in those cases we won't be stealing the final mntput() from anything that would care. * mntput_no_expire() doesn't lock anything on the fast path now. Incidentally, SMP and UP cases are handled the same way - no ifdefs there. * normal pathname resolution does *not* do any writes to mount_lock. It does, of course, bump the refcounts of vfsmount and dentry in the very end, but that's it. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-09-30 02:06:07 +00:00
read_seqlock_excl(&mount_lock);
res = is_path_reachable(real_mount(path1->mnt), path1->dentry, path2);
RCU'd vfsmounts * RCU-delayed freeing of vfsmounts * vfsmount_lock replaced with a seqlock (mount_lock) * sequence number from mount_lock is stored in nameidata->m_seq and used when we exit RCU mode * new vfsmount flag - MNT_SYNC_UMOUNT. Set by umount_tree() when its caller knows that vfsmount will have no surviving references. * synchronize_rcu() done between unlocking namespace_sem in namespace_unlock() and doing pending mntput(). * new helper: legitimize_mnt(mnt, seq). Checks the mount_lock sequence number against seq, then grabs reference to mnt. Then it rechecks mount_lock again to close the race and either returns success or drops the reference it has acquired. The subtle point is that in case of MNT_SYNC_UMOUNT we can simply decrement the refcount and sod off - aforementioned synchronize_rcu() makes sure that final mntput() won't come until we leave RCU mode. We need that, since we don't want to end up with some lazy pathwalk racing with umount() and stealing the final mntput() from it - caller of umount() may expect it to return only once the fs is shut down and we don't want to break that. In other cases (i.e. with MNT_SYNC_UMOUNT absent) we have to do full-blown mntput() in case of mount_lock sequence number mismatch happening just as we'd grabbed the reference, but in those cases we won't be stealing the final mntput() from anything that would care. * mntput_no_expire() doesn't lock anything on the fast path now. Incidentally, SMP and UP cases are handled the same way - no ifdefs there. * normal pathname resolution does *not* do any writes to mount_lock. It does, of course, bump the refcounts of vfsmount and dentry in the very end, but that's it. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-09-30 02:06:07 +00:00
read_sequnlock_excl(&mount_lock);
return res;
}
EXPORT_SYMBOL(path_is_under);
/*
* pivot_root Semantics:
* Moves the root file system of the current process to the directory put_old,
* makes new_root as the new root file system of the current process, and sets
* root/cwd of all processes which had them on the current root to new_root.
*
* Restrictions:
* The new_root and put_old must be directories, and must not be on the
* same file system as the current process root. The put_old must be
* underneath new_root, i.e. adding a non-zero number of /.. to the string
* pointed to by put_old must yield the same directory as new_root. No other
* file system may be mounted on put_old. After all, new_root is a mountpoint.
*
* Also, the current root cannot be on the 'rootfs' (initial ramfs) filesystem.
* See Documentation/filesystems/ramfs-rootfs-initramfs.rst for alternatives
* in this situation.
*
* Notes:
* - we don't move root/cwd if they are not at the root (reason: if something
* cared enough to change them, it's probably wrong to force them elsewhere)
* - it's okay to pick a root that isn't the root of a file system, e.g.
* /nfs/my_root where /nfs is the mount point. It must be a mountpoint,
* though, so you may need to say mount --bind /nfs/my_root /nfs/my_root
* first.
*/
SYSCALL_DEFINE2(pivot_root, const char __user *, new_root,
const char __user *, put_old)
{
struct path new, old, root;
struct mount *new_mnt, *root_mnt, *old_mnt, *root_parent, *ex_parent;
struct mountpoint *old_mp, *root_mp;
int error;
if (!may_mount())
return -EPERM;
error = user_path_at(AT_FDCWD, new_root,
LOOKUP_FOLLOW | LOOKUP_DIRECTORY, &new);
if (error)
goto out0;
error = user_path_at(AT_FDCWD, put_old,
LOOKUP_FOLLOW | LOOKUP_DIRECTORY, &old);
if (error)
goto out1;
error = security_sb_pivotroot(&old, &new);
if (error)
goto out2;
get_fs_root(current->fs, &root);
old_mp = lock_mount(&old);
error = PTR_ERR(old_mp);
if (IS_ERR(old_mp))
goto out3;
error = -EINVAL;
new_mnt = real_mount(new.mnt);
root_mnt = real_mount(root.mnt);
old_mnt = real_mount(old.mnt);
ex_parent = new_mnt->mnt_parent;
root_parent = root_mnt->mnt_parent;
if (IS_MNT_SHARED(old_mnt) ||
IS_MNT_SHARED(ex_parent) ||
IS_MNT_SHARED(root_parent))
goto out4;
if (!check_mnt(root_mnt) || !check_mnt(new_mnt))
goto out4;
if (new_mnt->mnt.mnt_flags & MNT_LOCKED)
goto out4;
error = -ENOENT;
if (d_unlinked(new.dentry))
goto out4;
error = -EBUSY;
if (new_mnt == root_mnt || old_mnt == root_mnt)
goto out4; /* loop, on the same file system */
error = -EINVAL;
if (!path_mounted(&root))
goto out4; /* not a mountpoint */
if (!mnt_has_parent(root_mnt))
goto out4; /* not attached */
if (!path_mounted(&new))
goto out4; /* not a mountpoint */
if (!mnt_has_parent(new_mnt))
goto out4; /* not attached */
/* make sure we can reach put_old from new_root */
if (!is_path_reachable(old_mnt, old.dentry, &new))
goto out4;
/* make certain new is below the root */
if (!is_path_reachable(new_mnt, new.dentry, &root))
goto out4;
lock_mount_hash();
umount_mnt(new_mnt);
root_mp = unhash_mnt(root_mnt); /* we'll need its mountpoint */
if (root_mnt->mnt.mnt_flags & MNT_LOCKED) {
new_mnt->mnt.mnt_flags |= MNT_LOCKED;
root_mnt->mnt.mnt_flags &= ~MNT_LOCKED;
}
/* mount old root on put_old */
fs: allow to mount beneath top mount Various distributions are adding or are in the process of adding support for system extensions and in the future configuration extensions through various tools. A more detailed explanation on system and configuration extensions can be found on the manpage which is listed below at [1]. System extension images may – dynamically at runtime — extend the /usr/ and /opt/ directory hierarchies with additional files. This is particularly useful on immutable system images where a /usr/ and/or /opt/ hierarchy residing on a read-only file system shall be extended temporarily at runtime without making any persistent modifications. When one or more system extension images are activated, their /usr/ and /opt/ hierarchies are combined via overlayfs with the same hierarchies of the host OS, and the host /usr/ and /opt/ overmounted with it ("merging"). When they are deactivated, the mount point is disassembled — again revealing the unmodified original host version of the hierarchy ("unmerging"). Merging thus makes the extension's resources suddenly appear below the /usr/ and /opt/ hierarchies as if they were included in the base OS image itself. Unmerging makes them disappear again, leaving in place only the files that were shipped with the base OS image itself. System configuration images are similar but operate on directories containing system or service configuration. On nearly all modern distributions mount propagation plays a crucial role and the rootfs of the OS is a shared mount in a peer group (usually with peer group id 1): TARGET SOURCE FSTYPE PROPAGATION MNT_ID PARENT_ID / / ext4 shared:1 29 1 On such systems all services and containers run in a separate mount namespace and are pivot_root()ed into their rootfs. A separate mount namespace is almost always used as it is the minimal isolation mechanism services have. But usually they are even much more isolated up to the point where they almost become indistinguishable from containers. Mount propagation again plays a crucial role here. The rootfs of all these services is a slave mount to the peer group of the host rootfs. This is done so the service will receive mount propagation events from the host when certain files or directories are updated. In addition, the rootfs of each service, container, and sandbox is also a shared mount in its separate peer group: TARGET SOURCE FSTYPE PROPAGATION MNT_ID PARENT_ID / / ext4 shared:24 master:1 71 47 For people not too familiar with mount propagation, the master:1 means that this is a slave mount to peer group 1. Which as one can see is the host rootfs as indicated by shared:1 above. The shared:24 indicates that the service rootfs is a shared mount in a separate peer group with peer group id 24. A service may run other services. Such nested services will also have a rootfs mount that is a slave to the peer group of the outer service rootfs mount. For containers things are just slighly different. A container's rootfs isn't a slave to the service's or host rootfs' peer group. The rootfs mount of a container is simply a shared mount in its own peer group: TARGET SOURCE FSTYPE PROPAGATION MNT_ID PARENT_ID /home/ubuntu/debian-tree / ext4 shared:99 61 60 So whereas services are isolated OS components a container is treated like a separate world and mount propagation into it is restricted to a single well known mount that is a slave to the peer group of the shared mount /run on the host: TARGET SOURCE FSTYPE PROPAGATION MNT_ID PARENT_ID /propagate/debian-tree /run/host/incoming tmpfs master:5 71 68 Here, the master:5 indicates that this mount is a slave to the peer group with peer group id 5. This allows to propagate mounts into the container and served as a workaround for not being able to insert mounts into mount namespaces directly. But the new mount api does support inserting mounts directly. For the interested reader the blogpost in [2] might be worth reading where I explain the old and the new approach to inserting mounts into mount namespaces. Containers of course, can themselves be run as services. They often run full systems themselves which means they again run services and containers with the exact same propagation settings explained above. The whole system is designed so that it can be easily updated, including all services in various fine-grained ways without having to enter every single service's mount namespace which would be prohibitively expensive. The mount propagation layout has been carefully chosen so it is possible to propagate updates for system extensions and configurations from the host into all services. The simplest model to update the whole system is to mount on top of /usr, /opt, or /etc on the host. The new mount on /usr, /opt, or /etc will then propagate into every service. This works cleanly the first time. However, when the system is updated multiple times it becomes necessary to unmount the first update on /opt, /usr, /etc and then propagate the new update. But this means, there's an interval where the old base system is accessible. This has to be avoided to protect against downgrade attacks. The vfs already exposes a mechanism to userspace whereby mounts can be mounted beneath an existing mount. Such mounts are internally referred to as "tucked". The patch series exposes the ability to mount beneath a top mount through the new MOVE_MOUNT_BENEATH flag for the move_mount() system call. This allows userspace to seamlessly upgrade mounts. After this series the only thing that will have changed is that mounting beneath an existing mount can be done explicitly instead of just implicitly. Today, there are two scenarios where a mount can be mounted beneath an existing mount instead of on top of it: (1) When a service or container is started in a new mount namespace and pivot_root()s into its new rootfs. The way this is done is by mounting the new rootfs beneath the old rootfs: fd_newroot = open("/var/lib/machines/fedora", ...); fd_oldroot = open("/", ...); fchdir(fd_newroot); pivot_root(".", "."); After the pivot_root(".", ".") call the new rootfs is mounted beneath the old rootfs which can then be unmounted to reveal the underlying mount: fchdir(fd_oldroot); umount2(".", MNT_DETACH); Since pivot_root() moves the caller into a new rootfs no mounts must be propagated out of the new rootfs as a consequence of the pivot_root() call. Thus, the mounts cannot be shared. (2) When a mount is propagated to a mount that already has another mount mounted on the same dentry. The easiest example for this is to create a new mount namespace. The following commands will create a mount namespace where the rootfs mount / will be a slave to the peer group of the host rootfs / mount's peer group. IOW, it will receive propagation from the host: mount --make-shared / unshare --mount --propagation=slave Now a new mount on the /mnt dentry in that mount namespace is created. (As it can be confusing it should be spelled out that the tmpfs mount on the /mnt dentry that was just created doesn't propagate back to the host because the rootfs mount / of the mount namespace isn't a peer of the host rootfs.): mount -t tmpfs tmpfs /mnt TARGET SOURCE FSTYPE PROPAGATION └─/mnt tmpfs tmpfs Now another terminal in the host mount namespace can observe that the mount indeed hasn't propagated back to into the host mount namespace. A new mount can now be created on top of the /mnt dentry with the rootfs mount / as its parent: mount --bind /opt /mnt TARGET SOURCE FSTYPE PROPAGATION └─/mnt /dev/sda2[/opt] ext4 shared:1 The mount namespace that was created earlier can now observe that the bind mount created on the host has propagated into it: TARGET SOURCE FSTYPE PROPAGATION └─/mnt /dev/sda2[/opt] ext4 master:1 └─/mnt tmpfs tmpfs But instead of having been mounted on top of the tmpfs mount at the /mnt dentry the /opt mount has been mounted on top of the rootfs mount at the /mnt dentry. And the tmpfs mount has been remounted on top of the propagated /opt mount at the /opt dentry. So in other words, the propagated mount has been mounted beneath the preexisting mount in that mount namespace. Mount namespaces make this easy to illustrate but it's also easy to mount beneath an existing mount in the same mount namespace (The following example assumes a shared rootfs mount / with peer group id 1): mount --bind /opt /opt TARGET SOURCE FSTYPE MNT_ID PARENT_ID PROPAGATION └─/opt /dev/sda2[/opt] ext4 188 29 shared:1 If another mount is mounted on top of the /opt mount at the /opt dentry: mount --bind /tmp /opt The following clunky mount tree will result: TARGET SOURCE FSTYPE MNT_ID PARENT_ID PROPAGATION └─/opt /dev/sda2[/tmp] ext4 405 29 shared:1 └─/opt /dev/sda2[/opt] ext4 188 405 shared:1 └─/opt /dev/sda2[/tmp] ext4 404 188 shared:1 The /tmp mount is mounted beneath the /opt mount and another copy is mounted on top of the /opt mount. This happens because the rootfs / and the /opt mount are shared mounts in the same peer group. When the new /tmp mount is supposed to be mounted at the /opt dentry then the /tmp mount first propagates to the root mount at the /opt dentry. But there already is the /opt mount mounted at the /opt dentry. So the old /opt mount at the /opt dentry will be mounted on top of the new /tmp mount at the /tmp dentry, i.e. @opt->mnt_parent is @tmp and @opt->mnt_mountpoint is /tmp (Note that @opt->mnt_root is /opt which is what shows up as /opt under SOURCE). So again, a mount will be mounted beneath a preexisting mount. (Fwiw, a few iterations of mount --bind /opt /opt in a loop on a shared rootfs is a good example of what could be referred to as mount explosion.) The main point is that such mounts allows userspace to umount a top mount and reveal an underlying mount. So for example, umounting the tmpfs mount on /mnt that was created in example (1) using mount namespaces reveals the /opt mount which was mounted beneath it. In (2) where a mount was mounted beneath the top mount in the same mount namespace unmounting the top mount would unmount both the top mount and the mount beneath. In the process the original mount would be remounted on top of the rootfs mount / at the /opt dentry again. This again, is a result of mount propagation only this time it's umount propagation. However, this can be avoided by simply making the parent mount / of the @opt mount a private or slave mount. Then the top mount and the original mount can be unmounted to reveal the mount beneath. These two examples are fairly arcane and are merely added to make it clear how mount propagation has effects on current and future features. More common use-cases will just be things like: mount -t btrfs /dev/sdA /mnt mount -t xfs /dev/sdB --beneath /mnt umount /mnt after which we'll have updated from a btrfs filesystem to a xfs filesystem without ever revealing the underlying mountpoint. The crux is that the proposed mechanism already exists and that it is so powerful as to cover cases where mounts are supposed to be updated with new versions. Crucially, it offers an important flexibility. Namely that updates to a system may either be forced or can be delayed and the umount of the top mount be left to a service if it is a cooperative one. This adds a new flag to move_mount() that allows to explicitly move a beneath the top mount adhering to the following semantics: * Mounts cannot be mounted beneath the rootfs. This restriction encompasses the rootfs but also chroots via chroot() and pivot_root(). To mount a mount beneath the rootfs or a chroot, pivot_root() can be used as illustrated above. * The source mount must be a private mount to force the kernel to allocate a new, unused peer group id. This isn't a required restriction but a voluntary one. It avoids repeating a semantical quirk that already exists today. If bind mounts which already have a peer group id are inserted into mount trees that have the same peer group id this can cause a lot of mount propagation events to be generated (For example, consider running mount --bind /opt /opt in a loop where the parent mount is a shared mount.). * Avoid getting rid of the top mount in the kernel. Cooperative services need to be able to unmount the top mount themselves. This also avoids a good deal of additional complexity. The umount would have to be propagated which would be another rather expensive operation. So namespace_lock() and lock_mount_hash() would potentially have to be held for a long time for both a mount and umount propagation. That should be avoided. * The path to mount beneath must be mounted and attached. * The top mount and its parent must be in the caller's mount namespace and the caller must be able to mount in that mount namespace. * The caller must be able to unmount the top mount to prove that they could reveal the underlying mount. * The propagation tree is calculated based on the destination mount's parent mount and the destination mount's mountpoint on the parent mount. Of course, if the parent of the destination mount and the destination mount are shared mounts in the same peer group and the mountpoint of the new mount to be mounted is a subdir of their ->mnt_root then both will receive a mount of /opt. That's probably easier to understand with an example. Assuming a standard shared rootfs /: mount --bind /opt /opt mount --bind /tmp /opt will cause the same mount tree as: mount --bind /opt /opt mount --beneath /tmp /opt because both / and /opt are shared mounts/peers in the same peer group and the /opt dentry is a subdirectory of both the parent's and the child's ->mnt_root. If a mount tree like that is created it almost always is an accident or abuse of mount propagation. Realistically what most people probably mean in this scenarios is: mount --bind /opt /opt mount --make-private /opt mount --make-shared /opt This forces the allocation of a new separate peer group for the /opt mount. Aferwards a mount --bind or mount --beneath actually makes sense as the / and /opt mount belong to different peer groups. Before that it's likely just confusion about what the user wanted to achieve. * Refuse MOVE_MOUNT_BENEATH if: (1) the @mnt_from has been overmounted in between path resolution and acquiring @namespace_sem when locking @mnt_to. This avoids the proliferation of shadow mounts. (2) if @to_mnt is moved to a different mountpoint while acquiring @namespace_sem to lock @to_mnt. (3) if @to_mnt is unmounted while acquiring @namespace_sem to lock @to_mnt. (4) if the parent of the target mount propagates to the target mount at the same mountpoint. This would mean mounting @mnt_from on @mnt_to->mnt_parent and then propagating a copy @c of @mnt_from onto @mnt_to. This defeats the whole purpose of mounting @mnt_from beneath @mnt_to. (5) if the parent mount @mnt_to->mnt_parent propagates to @mnt_from at the same mountpoint. If @mnt_to->mnt_parent propagates to @mnt_from this would mean propagating a copy @c of @mnt_from on top of @mnt_from. Afterwards @mnt_from would be mounted on top of @mnt_to->mnt_parent and @mnt_to would be unmounted from @mnt->mnt_parent and remounted on @mnt_from. But since @c is already mounted on @mnt_from, @mnt_to would ultimately be remounted on top of @c. Afterwards, @mnt_from would be covered by a copy @c of @mnt_from and @c would be covered by @mnt_from itself. This defeats the whole purpose of mounting @mnt_from beneath @mnt_to. Cases (1) to (3) are required as they deal with races that would cause bugs or unexpected behavior for users. Cases (4) and (5) refuse semantical quirks that would not be a bug but would cause weird mount trees to be created. While they can already be created via other means (mount --bind /opt /opt x n) there's no reason to repeat past mistakes in new features. Link: https://man7.org/linux/man-pages/man8/systemd-sysext.8.html [1] Link: https://brauner.io/2023/02/28/mounting-into-mount-namespaces.html [2] Link: https://github.com/flatcar/sysext-bakery Link: https://fedoraproject.org/wiki/Changes/Unified_Kernel_Support_Phase_1 Link: https://fedoraproject.org/wiki/Changes/Unified_Kernel_Support_Phase_2 Link: https://github.com/systemd/systemd/pull/26013 Reviewed-by: Seth Forshee (DigitalOcean) <sforshee@kernel.org> Message-Id: <20230202-fs-move-mount-replace-v4-4-98f3d80d7eaa@kernel.org> Signed-off-by: Christian Brauner <brauner@kernel.org>
2023-05-03 11:18:42 +00:00
attach_mnt(root_mnt, old_mnt, old_mp, false);
/* mount new_root on / */
fs: allow to mount beneath top mount Various distributions are adding or are in the process of adding support for system extensions and in the future configuration extensions through various tools. A more detailed explanation on system and configuration extensions can be found on the manpage which is listed below at [1]. System extension images may – dynamically at runtime — extend the /usr/ and /opt/ directory hierarchies with additional files. This is particularly useful on immutable system images where a /usr/ and/or /opt/ hierarchy residing on a read-only file system shall be extended temporarily at runtime without making any persistent modifications. When one or more system extension images are activated, their /usr/ and /opt/ hierarchies are combined via overlayfs with the same hierarchies of the host OS, and the host /usr/ and /opt/ overmounted with it ("merging"). When they are deactivated, the mount point is disassembled — again revealing the unmodified original host version of the hierarchy ("unmerging"). Merging thus makes the extension's resources suddenly appear below the /usr/ and /opt/ hierarchies as if they were included in the base OS image itself. Unmerging makes them disappear again, leaving in place only the files that were shipped with the base OS image itself. System configuration images are similar but operate on directories containing system or service configuration. On nearly all modern distributions mount propagation plays a crucial role and the rootfs of the OS is a shared mount in a peer group (usually with peer group id 1): TARGET SOURCE FSTYPE PROPAGATION MNT_ID PARENT_ID / / ext4 shared:1 29 1 On such systems all services and containers run in a separate mount namespace and are pivot_root()ed into their rootfs. A separate mount namespace is almost always used as it is the minimal isolation mechanism services have. But usually they are even much more isolated up to the point where they almost become indistinguishable from containers. Mount propagation again plays a crucial role here. The rootfs of all these services is a slave mount to the peer group of the host rootfs. This is done so the service will receive mount propagation events from the host when certain files or directories are updated. In addition, the rootfs of each service, container, and sandbox is also a shared mount in its separate peer group: TARGET SOURCE FSTYPE PROPAGATION MNT_ID PARENT_ID / / ext4 shared:24 master:1 71 47 For people not too familiar with mount propagation, the master:1 means that this is a slave mount to peer group 1. Which as one can see is the host rootfs as indicated by shared:1 above. The shared:24 indicates that the service rootfs is a shared mount in a separate peer group with peer group id 24. A service may run other services. Such nested services will also have a rootfs mount that is a slave to the peer group of the outer service rootfs mount. For containers things are just slighly different. A container's rootfs isn't a slave to the service's or host rootfs' peer group. The rootfs mount of a container is simply a shared mount in its own peer group: TARGET SOURCE FSTYPE PROPAGATION MNT_ID PARENT_ID /home/ubuntu/debian-tree / ext4 shared:99 61 60 So whereas services are isolated OS components a container is treated like a separate world and mount propagation into it is restricted to a single well known mount that is a slave to the peer group of the shared mount /run on the host: TARGET SOURCE FSTYPE PROPAGATION MNT_ID PARENT_ID /propagate/debian-tree /run/host/incoming tmpfs master:5 71 68 Here, the master:5 indicates that this mount is a slave to the peer group with peer group id 5. This allows to propagate mounts into the container and served as a workaround for not being able to insert mounts into mount namespaces directly. But the new mount api does support inserting mounts directly. For the interested reader the blogpost in [2] might be worth reading where I explain the old and the new approach to inserting mounts into mount namespaces. Containers of course, can themselves be run as services. They often run full systems themselves which means they again run services and containers with the exact same propagation settings explained above. The whole system is designed so that it can be easily updated, including all services in various fine-grained ways without having to enter every single service's mount namespace which would be prohibitively expensive. The mount propagation layout has been carefully chosen so it is possible to propagate updates for system extensions and configurations from the host into all services. The simplest model to update the whole system is to mount on top of /usr, /opt, or /etc on the host. The new mount on /usr, /opt, or /etc will then propagate into every service. This works cleanly the first time. However, when the system is updated multiple times it becomes necessary to unmount the first update on /opt, /usr, /etc and then propagate the new update. But this means, there's an interval where the old base system is accessible. This has to be avoided to protect against downgrade attacks. The vfs already exposes a mechanism to userspace whereby mounts can be mounted beneath an existing mount. Such mounts are internally referred to as "tucked". The patch series exposes the ability to mount beneath a top mount through the new MOVE_MOUNT_BENEATH flag for the move_mount() system call. This allows userspace to seamlessly upgrade mounts. After this series the only thing that will have changed is that mounting beneath an existing mount can be done explicitly instead of just implicitly. Today, there are two scenarios where a mount can be mounted beneath an existing mount instead of on top of it: (1) When a service or container is started in a new mount namespace and pivot_root()s into its new rootfs. The way this is done is by mounting the new rootfs beneath the old rootfs: fd_newroot = open("/var/lib/machines/fedora", ...); fd_oldroot = open("/", ...); fchdir(fd_newroot); pivot_root(".", "."); After the pivot_root(".", ".") call the new rootfs is mounted beneath the old rootfs which can then be unmounted to reveal the underlying mount: fchdir(fd_oldroot); umount2(".", MNT_DETACH); Since pivot_root() moves the caller into a new rootfs no mounts must be propagated out of the new rootfs as a consequence of the pivot_root() call. Thus, the mounts cannot be shared. (2) When a mount is propagated to a mount that already has another mount mounted on the same dentry. The easiest example for this is to create a new mount namespace. The following commands will create a mount namespace where the rootfs mount / will be a slave to the peer group of the host rootfs / mount's peer group. IOW, it will receive propagation from the host: mount --make-shared / unshare --mount --propagation=slave Now a new mount on the /mnt dentry in that mount namespace is created. (As it can be confusing it should be spelled out that the tmpfs mount on the /mnt dentry that was just created doesn't propagate back to the host because the rootfs mount / of the mount namespace isn't a peer of the host rootfs.): mount -t tmpfs tmpfs /mnt TARGET SOURCE FSTYPE PROPAGATION └─/mnt tmpfs tmpfs Now another terminal in the host mount namespace can observe that the mount indeed hasn't propagated back to into the host mount namespace. A new mount can now be created on top of the /mnt dentry with the rootfs mount / as its parent: mount --bind /opt /mnt TARGET SOURCE FSTYPE PROPAGATION └─/mnt /dev/sda2[/opt] ext4 shared:1 The mount namespace that was created earlier can now observe that the bind mount created on the host has propagated into it: TARGET SOURCE FSTYPE PROPAGATION └─/mnt /dev/sda2[/opt] ext4 master:1 └─/mnt tmpfs tmpfs But instead of having been mounted on top of the tmpfs mount at the /mnt dentry the /opt mount has been mounted on top of the rootfs mount at the /mnt dentry. And the tmpfs mount has been remounted on top of the propagated /opt mount at the /opt dentry. So in other words, the propagated mount has been mounted beneath the preexisting mount in that mount namespace. Mount namespaces make this easy to illustrate but it's also easy to mount beneath an existing mount in the same mount namespace (The following example assumes a shared rootfs mount / with peer group id 1): mount --bind /opt /opt TARGET SOURCE FSTYPE MNT_ID PARENT_ID PROPAGATION └─/opt /dev/sda2[/opt] ext4 188 29 shared:1 If another mount is mounted on top of the /opt mount at the /opt dentry: mount --bind /tmp /opt The following clunky mount tree will result: TARGET SOURCE FSTYPE MNT_ID PARENT_ID PROPAGATION └─/opt /dev/sda2[/tmp] ext4 405 29 shared:1 └─/opt /dev/sda2[/opt] ext4 188 405 shared:1 └─/opt /dev/sda2[/tmp] ext4 404 188 shared:1 The /tmp mount is mounted beneath the /opt mount and another copy is mounted on top of the /opt mount. This happens because the rootfs / and the /opt mount are shared mounts in the same peer group. When the new /tmp mount is supposed to be mounted at the /opt dentry then the /tmp mount first propagates to the root mount at the /opt dentry. But there already is the /opt mount mounted at the /opt dentry. So the old /opt mount at the /opt dentry will be mounted on top of the new /tmp mount at the /tmp dentry, i.e. @opt->mnt_parent is @tmp and @opt->mnt_mountpoint is /tmp (Note that @opt->mnt_root is /opt which is what shows up as /opt under SOURCE). So again, a mount will be mounted beneath a preexisting mount. (Fwiw, a few iterations of mount --bind /opt /opt in a loop on a shared rootfs is a good example of what could be referred to as mount explosion.) The main point is that such mounts allows userspace to umount a top mount and reveal an underlying mount. So for example, umounting the tmpfs mount on /mnt that was created in example (1) using mount namespaces reveals the /opt mount which was mounted beneath it. In (2) where a mount was mounted beneath the top mount in the same mount namespace unmounting the top mount would unmount both the top mount and the mount beneath. In the process the original mount would be remounted on top of the rootfs mount / at the /opt dentry again. This again, is a result of mount propagation only this time it's umount propagation. However, this can be avoided by simply making the parent mount / of the @opt mount a private or slave mount. Then the top mount and the original mount can be unmounted to reveal the mount beneath. These two examples are fairly arcane and are merely added to make it clear how mount propagation has effects on current and future features. More common use-cases will just be things like: mount -t btrfs /dev/sdA /mnt mount -t xfs /dev/sdB --beneath /mnt umount /mnt after which we'll have updated from a btrfs filesystem to a xfs filesystem without ever revealing the underlying mountpoint. The crux is that the proposed mechanism already exists and that it is so powerful as to cover cases where mounts are supposed to be updated with new versions. Crucially, it offers an important flexibility. Namely that updates to a system may either be forced or can be delayed and the umount of the top mount be left to a service if it is a cooperative one. This adds a new flag to move_mount() that allows to explicitly move a beneath the top mount adhering to the following semantics: * Mounts cannot be mounted beneath the rootfs. This restriction encompasses the rootfs but also chroots via chroot() and pivot_root(). To mount a mount beneath the rootfs or a chroot, pivot_root() can be used as illustrated above. * The source mount must be a private mount to force the kernel to allocate a new, unused peer group id. This isn't a required restriction but a voluntary one. It avoids repeating a semantical quirk that already exists today. If bind mounts which already have a peer group id are inserted into mount trees that have the same peer group id this can cause a lot of mount propagation events to be generated (For example, consider running mount --bind /opt /opt in a loop where the parent mount is a shared mount.). * Avoid getting rid of the top mount in the kernel. Cooperative services need to be able to unmount the top mount themselves. This also avoids a good deal of additional complexity. The umount would have to be propagated which would be another rather expensive operation. So namespace_lock() and lock_mount_hash() would potentially have to be held for a long time for both a mount and umount propagation. That should be avoided. * The path to mount beneath must be mounted and attached. * The top mount and its parent must be in the caller's mount namespace and the caller must be able to mount in that mount namespace. * The caller must be able to unmount the top mount to prove that they could reveal the underlying mount. * The propagation tree is calculated based on the destination mount's parent mount and the destination mount's mountpoint on the parent mount. Of course, if the parent of the destination mount and the destination mount are shared mounts in the same peer group and the mountpoint of the new mount to be mounted is a subdir of their ->mnt_root then both will receive a mount of /opt. That's probably easier to understand with an example. Assuming a standard shared rootfs /: mount --bind /opt /opt mount --bind /tmp /opt will cause the same mount tree as: mount --bind /opt /opt mount --beneath /tmp /opt because both / and /opt are shared mounts/peers in the same peer group and the /opt dentry is a subdirectory of both the parent's and the child's ->mnt_root. If a mount tree like that is created it almost always is an accident or abuse of mount propagation. Realistically what most people probably mean in this scenarios is: mount --bind /opt /opt mount --make-private /opt mount --make-shared /opt This forces the allocation of a new separate peer group for the /opt mount. Aferwards a mount --bind or mount --beneath actually makes sense as the / and /opt mount belong to different peer groups. Before that it's likely just confusion about what the user wanted to achieve. * Refuse MOVE_MOUNT_BENEATH if: (1) the @mnt_from has been overmounted in between path resolution and acquiring @namespace_sem when locking @mnt_to. This avoids the proliferation of shadow mounts. (2) if @to_mnt is moved to a different mountpoint while acquiring @namespace_sem to lock @to_mnt. (3) if @to_mnt is unmounted while acquiring @namespace_sem to lock @to_mnt. (4) if the parent of the target mount propagates to the target mount at the same mountpoint. This would mean mounting @mnt_from on @mnt_to->mnt_parent and then propagating a copy @c of @mnt_from onto @mnt_to. This defeats the whole purpose of mounting @mnt_from beneath @mnt_to. (5) if the parent mount @mnt_to->mnt_parent propagates to @mnt_from at the same mountpoint. If @mnt_to->mnt_parent propagates to @mnt_from this would mean propagating a copy @c of @mnt_from on top of @mnt_from. Afterwards @mnt_from would be mounted on top of @mnt_to->mnt_parent and @mnt_to would be unmounted from @mnt->mnt_parent and remounted on @mnt_from. But since @c is already mounted on @mnt_from, @mnt_to would ultimately be remounted on top of @c. Afterwards, @mnt_from would be covered by a copy @c of @mnt_from and @c would be covered by @mnt_from itself. This defeats the whole purpose of mounting @mnt_from beneath @mnt_to. Cases (1) to (3) are required as they deal with races that would cause bugs or unexpected behavior for users. Cases (4) and (5) refuse semantical quirks that would not be a bug but would cause weird mount trees to be created. While they can already be created via other means (mount --bind /opt /opt x n) there's no reason to repeat past mistakes in new features. Link: https://man7.org/linux/man-pages/man8/systemd-sysext.8.html [1] Link: https://brauner.io/2023/02/28/mounting-into-mount-namespaces.html [2] Link: https://github.com/flatcar/sysext-bakery Link: https://fedoraproject.org/wiki/Changes/Unified_Kernel_Support_Phase_1 Link: https://fedoraproject.org/wiki/Changes/Unified_Kernel_Support_Phase_2 Link: https://github.com/systemd/systemd/pull/26013 Reviewed-by: Seth Forshee (DigitalOcean) <sforshee@kernel.org> Message-Id: <20230202-fs-move-mount-replace-v4-4-98f3d80d7eaa@kernel.org> Signed-off-by: Christian Brauner <brauner@kernel.org>
2023-05-03 11:18:42 +00:00
attach_mnt(new_mnt, root_parent, root_mp, false);
mnt_add_count(root_parent, -1);
touch_mnt_namespace(current->nsproxy->mnt_ns);
/* A moved mount should not expire automatically */
list_del_init(&new_mnt->mnt_expire);
mnt: Protect the mountpoint hashtable with mount_lock Protecting the mountpoint hashtable with namespace_sem was sufficient until a call to umount_mnt was added to mntput_no_expire. At which point it became possible for multiple calls of put_mountpoint on the same hash chain to happen on the same time. Kristen Johansen <kjlx@templeofstupid.com> reported: > This can cause a panic when simultaneous callers of put_mountpoint > attempt to free the same mountpoint. This occurs because some callers > hold the mount_hash_lock, while others hold the namespace lock. Some > even hold both. > > In this submitter's case, the panic manifested itself as a GP fault in > put_mountpoint() when it called hlist_del() and attempted to dereference > a m_hash.pprev that had been poisioned by another thread. Al Viro observed that the simple fix is to switch from using the namespace_sem to the mount_lock to protect the mountpoint hash table. I have taken Al's suggested patch moved put_mountpoint in pivot_root (instead of taking mount_lock an additional time), and have replaced new_mountpoint with get_mountpoint a function that does the hash table lookup and addition under the mount_lock. The introduction of get_mounptoint ensures that only the mount_lock is needed to manipulate the mountpoint hashtable. d_set_mounted is modified to only set DCACHE_MOUNTED if it is not already set. This allows get_mountpoint to use the setting of DCACHE_MOUNTED to ensure adding a struct mountpoint for a dentry happens exactly once. Cc: stable@vger.kernel.org Fixes: ce07d891a089 ("mnt: Honor MNT_LOCKED when detaching mounts") Reported-by: Krister Johansen <kjlx@templeofstupid.com> Suggested-by: Al Viro <viro@ZenIV.linux.org.uk> Acked-by: Al Viro <viro@ZenIV.linux.org.uk> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2017-01-03 01:18:43 +00:00
put_mountpoint(root_mp);
unlock_mount_hash();
chroot_fs_refs(&root, &new);
error = 0;
out4:
unlock_mount(old_mp);
if (!error)
mntput_no_expire(ex_parent);
out3:
path_put(&root);
out2:
path_put(&old);
out1:
path_put(&new);
out0:
return error;
}
fs: add mount_setattr() This implements the missing mount_setattr() syscall. While the new mount api allows to change the properties of a superblock there is currently no way to change the properties of a mount or a mount tree using file descriptors which the new mount api is based on. In addition the old mount api has the restriction that mount options cannot be applied recursively. This hasn't changed since changing mount options on a per-mount basis was implemented in [1] and has been a frequent request not just for convenience but also for security reasons. The legacy mount syscall is unable to accommodate this behavior without introducing a whole new set of flags because MS_REC | MS_REMOUNT | MS_BIND | MS_RDONLY | MS_NOEXEC | [...] only apply the mount option to the topmost mount. Changing MS_REC to apply to the whole mount tree would mean introducing a significant uapi change and would likely cause significant regressions. The new mount_setattr() syscall allows to recursively clear and set mount options in one shot. Multiple calls to change mount options requesting the same changes are idempotent: int mount_setattr(int dfd, const char *path, unsigned flags, struct mount_attr *uattr, size_t usize); Flags to modify path resolution behavior are specified in the @flags argument. Currently, AT_EMPTY_PATH, AT_RECURSIVE, AT_SYMLINK_NOFOLLOW, and AT_NO_AUTOMOUNT are supported. If useful, additional lookup flags to restrict path resolution as introduced with openat2() might be supported in the future. The mount_setattr() syscall can be expected to grow over time and is designed with extensibility in mind. It follows the extensible syscall pattern we have used with other syscalls such as openat2(), clone3(), sched_{set,get}attr(), and others. The set of mount options is passed in the uapi struct mount_attr which currently has the following layout: struct mount_attr { __u64 attr_set; __u64 attr_clr; __u64 propagation; __u64 userns_fd; }; The @attr_set and @attr_clr members are used to clear and set mount options. This way a user can e.g. request that a set of flags is to be raised such as turning mounts readonly by raising MOUNT_ATTR_RDONLY in @attr_set while at the same time requesting that another set of flags is to be lowered such as removing noexec from a mount tree by specifying MOUNT_ATTR_NOEXEC in @attr_clr. Note, since the MOUNT_ATTR_<atime> values are an enum starting from 0, not a bitmap, users wanting to transition to a different atime setting cannot simply specify the atime setting in @attr_set, but must also specify MOUNT_ATTR__ATIME in the @attr_clr field. So we ensure that MOUNT_ATTR__ATIME can't be partially set in @attr_clr and that @attr_set can't have any atime bits set if MOUNT_ATTR__ATIME isn't set in @attr_clr. The @propagation field lets callers specify the propagation type of a mount tree. Propagation is a single property that has four different settings and as such is not really a flag argument but an enum. Specifically, it would be unclear what setting and clearing propagation settings in combination would amount to. The legacy mount() syscall thus forbids the combination of multiple propagation settings too. The goal is to keep the semantics of mount propagation somewhat simple as they are overly complex as it is. The @userns_fd field lets user specify a user namespace whose idmapping becomes the idmapping of the mount. This is implemented and explained in detail in the next patch. [1]: commit 2e4b7fcd9260 ("[PATCH] r/o bind mounts: honor mount writer counts at remount") Link: https://lore.kernel.org/r/20210121131959.646623-35-christian.brauner@ubuntu.com Cc: David Howells <dhowells@redhat.com> Cc: Aleksa Sarai <cyphar@cyphar.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: linux-fsdevel@vger.kernel.org Cc: linux-api@vger.kernel.org Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
2021-01-21 13:19:53 +00:00
static unsigned int recalc_flags(struct mount_kattr *kattr, struct mount *mnt)
{
unsigned int flags = mnt->mnt.mnt_flags;
/* flags to clear */
flags &= ~kattr->attr_clr;
/* flags to raise */
flags |= kattr->attr_set;
return flags;
}
fs: introduce MOUNT_ATTR_IDMAP Introduce a new mount bind mount property to allow idmapping mounts. The MOUNT_ATTR_IDMAP flag can be set via the new mount_setattr() syscall together with a file descriptor referring to a user namespace. The user namespace referenced by the namespace file descriptor will be attached to the bind mount. All interactions with the filesystem going through that mount will be mapped according to the mapping specified in the user namespace attached to it. Using user namespaces to mark mounts means we can reuse all the existing infrastructure in the kernel that already exists to handle idmappings and can also use this for permission checking to allow unprivileged user to create idmapped mounts in the future. Idmapping a mount is decoupled from the caller's user and mount namespace. This means idmapped mounts can be created in the initial user namespace which is an important use-case for systemd-homed, portable usb-sticks between systems, sharing data between the initial user namespace and unprivileged containers, and other use-cases that have been brought up. For example, assume a home directory where all files are owned by uid and gid 1000 and the home directory is brought to a new laptop where the user has id 12345. The system administrator can simply create a mount of this home directory with a mapping of 1000:12345:1 and other mappings to indicate the ids should be kept. (With this it is e.g. also possible to create idmapped mounts on the host with an identity mapping 1:1:100000 where the root user is not mapped. A user with root access that e.g. has been pivot rooted into such a mount on the host will be not be able to execute, read, write, or create files as root.) Given that mapping a mount is decoupled from the caller's user namespace a sufficiently privileged process such as a container manager can set up an idmapped mount for the container and the container can simply pivot root to it. There's no need for the container to do anything. The mount will appear correctly mapped independent of the user namespace the container uses. This means we don't need to mark a mount as idmappable. In order to create an idmapped mount the caller must currently be privileged in the user namespace of the superblock the mount belongs to. Once a mount has been idmapped we don't allow it to change its mapping. This keeps permission checking and life-cycle management simple. Users wanting to change the idmapped can always create a new detached mount with a different idmapping. Link: https://lore.kernel.org/r/20210121131959.646623-36-christian.brauner@ubuntu.com Cc: Christoph Hellwig <hch@lst.de> Cc: David Howells <dhowells@redhat.com> Cc: Mauricio Vásquez Bernal <mauricio@kinvolk.io> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: linux-fsdevel@vger.kernel.org Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
2021-01-21 13:19:54 +00:00
static int can_idmap_mount(const struct mount_kattr *kattr, struct mount *mnt)
{
struct vfsmount *m = &mnt->mnt;
fs: support mapped mounts of mapped filesystems In previous patches we added new and modified existing helpers to handle idmapped mounts of filesystems mounted with an idmapping. In this final patch we convert all relevant places in the vfs to actually pass the filesystem's idmapping into these helpers. With this the vfs is in shape to handle idmapped mounts of filesystems mounted with an idmapping. Note that this is just the generic infrastructure. Actually adding support for idmapped mounts to a filesystem mountable with an idmapping is follow-up work. In this patch we extend the definition of an idmapped mount from a mount that that has the initial idmapping attached to it to a mount that has an idmapping attached to it which is not the same as the idmapping the filesystem was mounted with. As before we do not allow the initial idmapping to be attached to a mount. In addition this patch prevents that the idmapping the filesystem was mounted with can be attached to a mount created based on this filesystem. This has multiple reasons and advantages. First, attaching the initial idmapping or the filesystem's idmapping doesn't make much sense as in both cases the values of the i_{g,u}id and other places where k{g,u}ids are used do not change. Second, a user that really wants to do this for whatever reason can just create a separate dedicated identical idmapping to attach to the mount. Third, we can continue to use the initial idmapping as an indicator that a mount is not idmapped allowing us to continue to keep passing the initial idmapping into the mapping helpers to tell them that something isn't an idmapped mount even if the filesystem is mounted with an idmapping. Link: https://lore.kernel.org/r/20211123114227.3124056-11-brauner@kernel.org (v1) Link: https://lore.kernel.org/r/20211130121032.3753852-11-brauner@kernel.org (v2) Link: https://lore.kernel.org/r/20211203111707.3901969-11-brauner@kernel.org Cc: Seth Forshee <sforshee@digitalocean.com> Cc: Amir Goldstein <amir73il@gmail.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Al Viro <viro@zeniv.linux.org.uk> CC: linux-fsdevel@vger.kernel.org Reviewed-by: Seth Forshee <sforshee@digitalocean.com> Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
2021-12-03 11:17:07 +00:00
struct user_namespace *fs_userns = m->mnt_sb->s_user_ns;
fs: introduce MOUNT_ATTR_IDMAP Introduce a new mount bind mount property to allow idmapping mounts. The MOUNT_ATTR_IDMAP flag can be set via the new mount_setattr() syscall together with a file descriptor referring to a user namespace. The user namespace referenced by the namespace file descriptor will be attached to the bind mount. All interactions with the filesystem going through that mount will be mapped according to the mapping specified in the user namespace attached to it. Using user namespaces to mark mounts means we can reuse all the existing infrastructure in the kernel that already exists to handle idmappings and can also use this for permission checking to allow unprivileged user to create idmapped mounts in the future. Idmapping a mount is decoupled from the caller's user and mount namespace. This means idmapped mounts can be created in the initial user namespace which is an important use-case for systemd-homed, portable usb-sticks between systems, sharing data between the initial user namespace and unprivileged containers, and other use-cases that have been brought up. For example, assume a home directory where all files are owned by uid and gid 1000 and the home directory is brought to a new laptop where the user has id 12345. The system administrator can simply create a mount of this home directory with a mapping of 1000:12345:1 and other mappings to indicate the ids should be kept. (With this it is e.g. also possible to create idmapped mounts on the host with an identity mapping 1:1:100000 where the root user is not mapped. A user with root access that e.g. has been pivot rooted into such a mount on the host will be not be able to execute, read, write, or create files as root.) Given that mapping a mount is decoupled from the caller's user namespace a sufficiently privileged process such as a container manager can set up an idmapped mount for the container and the container can simply pivot root to it. There's no need for the container to do anything. The mount will appear correctly mapped independent of the user namespace the container uses. This means we don't need to mark a mount as idmappable. In order to create an idmapped mount the caller must currently be privileged in the user namespace of the superblock the mount belongs to. Once a mount has been idmapped we don't allow it to change its mapping. This keeps permission checking and life-cycle management simple. Users wanting to change the idmapped can always create a new detached mount with a different idmapping. Link: https://lore.kernel.org/r/20210121131959.646623-36-christian.brauner@ubuntu.com Cc: Christoph Hellwig <hch@lst.de> Cc: David Howells <dhowells@redhat.com> Cc: Mauricio Vásquez Bernal <mauricio@kinvolk.io> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: linux-fsdevel@vger.kernel.org Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
2021-01-21 13:19:54 +00:00
fs: introduce dedicated idmap type for mounts Last cycle we've already made the interaction with idmapped mounts more robust and type safe by introducing the vfs{g,u}id_t type. This cycle we concluded the conversion and removed the legacy helpers. Currently we still pass around the plain namespace that was attached to a mount. This is in general pretty convenient but it makes it easy to conflate filesystem and mount namespaces and what different roles they have to play. Especially for filesystem developers without much experience in this area this is an easy source for bugs. Instead of passing the plain namespace we introduce a dedicated type struct mnt_idmap and replace the pointer with a pointer to a struct mnt_idmap. There are no semantic or size changes for the mount struct caused by this. We then start converting all places aware of idmapped mounts to rely on struct mnt_idmap. Once the conversion is done all helpers down to the really low-level make_vfs{g,u}id() and from_vfs{g,u}id() will take a struct mnt_idmap argument instead of two namespace arguments. This way it becomes impossible to conflate the two, removing and thus eliminating the possibility of any bugs. Fwiw, I fixed some issues in that area a while ago in ntfs3 and ksmbd in the past. Afterwards, only low-level code can ultimately use the associated namespace for any permission checks. Even most of the vfs can be ultimately completely oblivious about this and filesystems will never interact with it directly in any form in the future. A struct mnt_idmap currently encompasses a simple refcount and a pointer to the relevant namespace the mount is idmapped to. If a mount isn't idmapped then it will point to a static nop_mnt_idmap. If it is an idmapped mount it will point to a new struct mnt_idmap. As usual there are no allocations or anything happening for non-idmapped mounts. Everthing is carefully written to be a nop for non-idmapped mounts as has always been the case. If an idmapped mount or mount tree is created a new struct mnt_idmap is allocated and a reference taken on the relevant namespace. For each mount in a mount tree that gets idmapped or a mount that inherits the idmap when it is cloned the reference count on the associated struct mnt_idmap is bumped. Just a reminder that we only allow a mount to change it's idmapping a single time and only if it hasn't already been attached to the filesystems and has no active writers. The actual changes are fairly straightforward. This will have huge benefits for maintenance and security in the long run even if it causes some churn. I'm aware that there's some cost for all of you. And I'll commit to doing this work and make this as painless as I can. Note that this also makes it possible to extend struct mount_idmap in the future. For example, it would be possible to place the namespace pointer in an anonymous union together with an idmapping struct. This would allow us to expose an api to userspace that would let it specify idmappings directly instead of having to go through the detour of setting up namespaces at all. This just adds the infrastructure and doesn't do any conversions. Reviewed-by: Seth Forshee (DigitalOcean) <sforshee@kernel.org> Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
2022-10-26 10:51:27 +00:00
if (!kattr->mnt_idmap)
fs: introduce MOUNT_ATTR_IDMAP Introduce a new mount bind mount property to allow idmapping mounts. The MOUNT_ATTR_IDMAP flag can be set via the new mount_setattr() syscall together with a file descriptor referring to a user namespace. The user namespace referenced by the namespace file descriptor will be attached to the bind mount. All interactions with the filesystem going through that mount will be mapped according to the mapping specified in the user namespace attached to it. Using user namespaces to mark mounts means we can reuse all the existing infrastructure in the kernel that already exists to handle idmappings and can also use this for permission checking to allow unprivileged user to create idmapped mounts in the future. Idmapping a mount is decoupled from the caller's user and mount namespace. This means idmapped mounts can be created in the initial user namespace which is an important use-case for systemd-homed, portable usb-sticks between systems, sharing data between the initial user namespace and unprivileged containers, and other use-cases that have been brought up. For example, assume a home directory where all files are owned by uid and gid 1000 and the home directory is brought to a new laptop where the user has id 12345. The system administrator can simply create a mount of this home directory with a mapping of 1000:12345:1 and other mappings to indicate the ids should be kept. (With this it is e.g. also possible to create idmapped mounts on the host with an identity mapping 1:1:100000 where the root user is not mapped. A user with root access that e.g. has been pivot rooted into such a mount on the host will be not be able to execute, read, write, or create files as root.) Given that mapping a mount is decoupled from the caller's user namespace a sufficiently privileged process such as a container manager can set up an idmapped mount for the container and the container can simply pivot root to it. There's no need for the container to do anything. The mount will appear correctly mapped independent of the user namespace the container uses. This means we don't need to mark a mount as idmappable. In order to create an idmapped mount the caller must currently be privileged in the user namespace of the superblock the mount belongs to. Once a mount has been idmapped we don't allow it to change its mapping. This keeps permission checking and life-cycle management simple. Users wanting to change the idmapped can always create a new detached mount with a different idmapping. Link: https://lore.kernel.org/r/20210121131959.646623-36-christian.brauner@ubuntu.com Cc: Christoph Hellwig <hch@lst.de> Cc: David Howells <dhowells@redhat.com> Cc: Mauricio Vásquez Bernal <mauricio@kinvolk.io> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: linux-fsdevel@vger.kernel.org Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
2021-01-21 13:19:54 +00:00
return 0;
fs: support mapped mounts of mapped filesystems In previous patches we added new and modified existing helpers to handle idmapped mounts of filesystems mounted with an idmapping. In this final patch we convert all relevant places in the vfs to actually pass the filesystem's idmapping into these helpers. With this the vfs is in shape to handle idmapped mounts of filesystems mounted with an idmapping. Note that this is just the generic infrastructure. Actually adding support for idmapped mounts to a filesystem mountable with an idmapping is follow-up work. In this patch we extend the definition of an idmapped mount from a mount that that has the initial idmapping attached to it to a mount that has an idmapping attached to it which is not the same as the idmapping the filesystem was mounted with. As before we do not allow the initial idmapping to be attached to a mount. In addition this patch prevents that the idmapping the filesystem was mounted with can be attached to a mount created based on this filesystem. This has multiple reasons and advantages. First, attaching the initial idmapping or the filesystem's idmapping doesn't make much sense as in both cases the values of the i_{g,u}id and other places where k{g,u}ids are used do not change. Second, a user that really wants to do this for whatever reason can just create a separate dedicated identical idmapping to attach to the mount. Third, we can continue to use the initial idmapping as an indicator that a mount is not idmapped allowing us to continue to keep passing the initial idmapping into the mapping helpers to tell them that something isn't an idmapped mount even if the filesystem is mounted with an idmapping. Link: https://lore.kernel.org/r/20211123114227.3124056-11-brauner@kernel.org (v1) Link: https://lore.kernel.org/r/20211130121032.3753852-11-brauner@kernel.org (v2) Link: https://lore.kernel.org/r/20211203111707.3901969-11-brauner@kernel.org Cc: Seth Forshee <sforshee@digitalocean.com> Cc: Amir Goldstein <amir73il@gmail.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Al Viro <viro@zeniv.linux.org.uk> CC: linux-fsdevel@vger.kernel.org Reviewed-by: Seth Forshee <sforshee@digitalocean.com> Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
2021-12-03 11:17:07 +00:00
/*
* Creating an idmapped mount with the filesystem wide idmapping
* doesn't make sense so block that. We don't allow mushy semantics.
*/
if (kattr->mnt_userns == m->mnt_sb->s_user_ns)
fs: support mapped mounts of mapped filesystems In previous patches we added new and modified existing helpers to handle idmapped mounts of filesystems mounted with an idmapping. In this final patch we convert all relevant places in the vfs to actually pass the filesystem's idmapping into these helpers. With this the vfs is in shape to handle idmapped mounts of filesystems mounted with an idmapping. Note that this is just the generic infrastructure. Actually adding support for idmapped mounts to a filesystem mountable with an idmapping is follow-up work. In this patch we extend the definition of an idmapped mount from a mount that that has the initial idmapping attached to it to a mount that has an idmapping attached to it which is not the same as the idmapping the filesystem was mounted with. As before we do not allow the initial idmapping to be attached to a mount. In addition this patch prevents that the idmapping the filesystem was mounted with can be attached to a mount created based on this filesystem. This has multiple reasons and advantages. First, attaching the initial idmapping or the filesystem's idmapping doesn't make much sense as in both cases the values of the i_{g,u}id and other places where k{g,u}ids are used do not change. Second, a user that really wants to do this for whatever reason can just create a separate dedicated identical idmapping to attach to the mount. Third, we can continue to use the initial idmapping as an indicator that a mount is not idmapped allowing us to continue to keep passing the initial idmapping into the mapping helpers to tell them that something isn't an idmapped mount even if the filesystem is mounted with an idmapping. Link: https://lore.kernel.org/r/20211123114227.3124056-11-brauner@kernel.org (v1) Link: https://lore.kernel.org/r/20211130121032.3753852-11-brauner@kernel.org (v2) Link: https://lore.kernel.org/r/20211203111707.3901969-11-brauner@kernel.org Cc: Seth Forshee <sforshee@digitalocean.com> Cc: Amir Goldstein <amir73il@gmail.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Al Viro <viro@zeniv.linux.org.uk> CC: linux-fsdevel@vger.kernel.org Reviewed-by: Seth Forshee <sforshee@digitalocean.com> Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
2021-12-03 11:17:07 +00:00
return -EINVAL;
fs: introduce MOUNT_ATTR_IDMAP Introduce a new mount bind mount property to allow idmapping mounts. The MOUNT_ATTR_IDMAP flag can be set via the new mount_setattr() syscall together with a file descriptor referring to a user namespace. The user namespace referenced by the namespace file descriptor will be attached to the bind mount. All interactions with the filesystem going through that mount will be mapped according to the mapping specified in the user namespace attached to it. Using user namespaces to mark mounts means we can reuse all the existing infrastructure in the kernel that already exists to handle idmappings and can also use this for permission checking to allow unprivileged user to create idmapped mounts in the future. Idmapping a mount is decoupled from the caller's user and mount namespace. This means idmapped mounts can be created in the initial user namespace which is an important use-case for systemd-homed, portable usb-sticks between systems, sharing data between the initial user namespace and unprivileged containers, and other use-cases that have been brought up. For example, assume a home directory where all files are owned by uid and gid 1000 and the home directory is brought to a new laptop where the user has id 12345. The system administrator can simply create a mount of this home directory with a mapping of 1000:12345:1 and other mappings to indicate the ids should be kept. (With this it is e.g. also possible to create idmapped mounts on the host with an identity mapping 1:1:100000 where the root user is not mapped. A user with root access that e.g. has been pivot rooted into such a mount on the host will be not be able to execute, read, write, or create files as root.) Given that mapping a mount is decoupled from the caller's user namespace a sufficiently privileged process such as a container manager can set up an idmapped mount for the container and the container can simply pivot root to it. There's no need for the container to do anything. The mount will appear correctly mapped independent of the user namespace the container uses. This means we don't need to mark a mount as idmappable. In order to create an idmapped mount the caller must currently be privileged in the user namespace of the superblock the mount belongs to. Once a mount has been idmapped we don't allow it to change its mapping. This keeps permission checking and life-cycle management simple. Users wanting to change the idmapped can always create a new detached mount with a different idmapping. Link: https://lore.kernel.org/r/20210121131959.646623-36-christian.brauner@ubuntu.com Cc: Christoph Hellwig <hch@lst.de> Cc: David Howells <dhowells@redhat.com> Cc: Mauricio Vásquez Bernal <mauricio@kinvolk.io> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: linux-fsdevel@vger.kernel.org Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
2021-01-21 13:19:54 +00:00
/*
* Once a mount has been idmapped we don't allow it to change its
* mapping. It makes things simpler and callers can just create
* another bind-mount they can idmap if they want to.
*/
if (is_idmapped_mnt(m))
fs: introduce MOUNT_ATTR_IDMAP Introduce a new mount bind mount property to allow idmapping mounts. The MOUNT_ATTR_IDMAP flag can be set via the new mount_setattr() syscall together with a file descriptor referring to a user namespace. The user namespace referenced by the namespace file descriptor will be attached to the bind mount. All interactions with the filesystem going through that mount will be mapped according to the mapping specified in the user namespace attached to it. Using user namespaces to mark mounts means we can reuse all the existing infrastructure in the kernel that already exists to handle idmappings and can also use this for permission checking to allow unprivileged user to create idmapped mounts in the future. Idmapping a mount is decoupled from the caller's user and mount namespace. This means idmapped mounts can be created in the initial user namespace which is an important use-case for systemd-homed, portable usb-sticks between systems, sharing data between the initial user namespace and unprivileged containers, and other use-cases that have been brought up. For example, assume a home directory where all files are owned by uid and gid 1000 and the home directory is brought to a new laptop where the user has id 12345. The system administrator can simply create a mount of this home directory with a mapping of 1000:12345:1 and other mappings to indicate the ids should be kept. (With this it is e.g. also possible to create idmapped mounts on the host with an identity mapping 1:1:100000 where the root user is not mapped. A user with root access that e.g. has been pivot rooted into such a mount on the host will be not be able to execute, read, write, or create files as root.) Given that mapping a mount is decoupled from the caller's user namespace a sufficiently privileged process such as a container manager can set up an idmapped mount for the container and the container can simply pivot root to it. There's no need for the container to do anything. The mount will appear correctly mapped independent of the user namespace the container uses. This means we don't need to mark a mount as idmappable. In order to create an idmapped mount the caller must currently be privileged in the user namespace of the superblock the mount belongs to. Once a mount has been idmapped we don't allow it to change its mapping. This keeps permission checking and life-cycle management simple. Users wanting to change the idmapped can always create a new detached mount with a different idmapping. Link: https://lore.kernel.org/r/20210121131959.646623-36-christian.brauner@ubuntu.com Cc: Christoph Hellwig <hch@lst.de> Cc: David Howells <dhowells@redhat.com> Cc: Mauricio Vásquez Bernal <mauricio@kinvolk.io> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: linux-fsdevel@vger.kernel.org Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
2021-01-21 13:19:54 +00:00
return -EPERM;
/* The underlying filesystem doesn't support idmapped mounts yet. */
if (!(m->mnt_sb->s_type->fs_flags & FS_ALLOW_IDMAP))
return -EINVAL;
/* The filesystem has turned off idmapped mounts. */
if (m->mnt_sb->s_iflags & SB_I_NOIDMAP)
return -EINVAL;
fs: introduce MOUNT_ATTR_IDMAP Introduce a new mount bind mount property to allow idmapping mounts. The MOUNT_ATTR_IDMAP flag can be set via the new mount_setattr() syscall together with a file descriptor referring to a user namespace. The user namespace referenced by the namespace file descriptor will be attached to the bind mount. All interactions with the filesystem going through that mount will be mapped according to the mapping specified in the user namespace attached to it. Using user namespaces to mark mounts means we can reuse all the existing infrastructure in the kernel that already exists to handle idmappings and can also use this for permission checking to allow unprivileged user to create idmapped mounts in the future. Idmapping a mount is decoupled from the caller's user and mount namespace. This means idmapped mounts can be created in the initial user namespace which is an important use-case for systemd-homed, portable usb-sticks between systems, sharing data between the initial user namespace and unprivileged containers, and other use-cases that have been brought up. For example, assume a home directory where all files are owned by uid and gid 1000 and the home directory is brought to a new laptop where the user has id 12345. The system administrator can simply create a mount of this home directory with a mapping of 1000:12345:1 and other mappings to indicate the ids should be kept. (With this it is e.g. also possible to create idmapped mounts on the host with an identity mapping 1:1:100000 where the root user is not mapped. A user with root access that e.g. has been pivot rooted into such a mount on the host will be not be able to execute, read, write, or create files as root.) Given that mapping a mount is decoupled from the caller's user namespace a sufficiently privileged process such as a container manager can set up an idmapped mount for the container and the container can simply pivot root to it. There's no need for the container to do anything. The mount will appear correctly mapped independent of the user namespace the container uses. This means we don't need to mark a mount as idmappable. In order to create an idmapped mount the caller must currently be privileged in the user namespace of the superblock the mount belongs to. Once a mount has been idmapped we don't allow it to change its mapping. This keeps permission checking and life-cycle management simple. Users wanting to change the idmapped can always create a new detached mount with a different idmapping. Link: https://lore.kernel.org/r/20210121131959.646623-36-christian.brauner@ubuntu.com Cc: Christoph Hellwig <hch@lst.de> Cc: David Howells <dhowells@redhat.com> Cc: Mauricio Vásquez Bernal <mauricio@kinvolk.io> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: linux-fsdevel@vger.kernel.org Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
2021-01-21 13:19:54 +00:00
/* We're not controlling the superblock. */
fs: support mapped mounts of mapped filesystems In previous patches we added new and modified existing helpers to handle idmapped mounts of filesystems mounted with an idmapping. In this final patch we convert all relevant places in the vfs to actually pass the filesystem's idmapping into these helpers. With this the vfs is in shape to handle idmapped mounts of filesystems mounted with an idmapping. Note that this is just the generic infrastructure. Actually adding support for idmapped mounts to a filesystem mountable with an idmapping is follow-up work. In this patch we extend the definition of an idmapped mount from a mount that that has the initial idmapping attached to it to a mount that has an idmapping attached to it which is not the same as the idmapping the filesystem was mounted with. As before we do not allow the initial idmapping to be attached to a mount. In addition this patch prevents that the idmapping the filesystem was mounted with can be attached to a mount created based on this filesystem. This has multiple reasons and advantages. First, attaching the initial idmapping or the filesystem's idmapping doesn't make much sense as in both cases the values of the i_{g,u}id and other places where k{g,u}ids are used do not change. Second, a user that really wants to do this for whatever reason can just create a separate dedicated identical idmapping to attach to the mount. Third, we can continue to use the initial idmapping as an indicator that a mount is not idmapped allowing us to continue to keep passing the initial idmapping into the mapping helpers to tell them that something isn't an idmapped mount even if the filesystem is mounted with an idmapping. Link: https://lore.kernel.org/r/20211123114227.3124056-11-brauner@kernel.org (v1) Link: https://lore.kernel.org/r/20211130121032.3753852-11-brauner@kernel.org (v2) Link: https://lore.kernel.org/r/20211203111707.3901969-11-brauner@kernel.org Cc: Seth Forshee <sforshee@digitalocean.com> Cc: Amir Goldstein <amir73il@gmail.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Al Viro <viro@zeniv.linux.org.uk> CC: linux-fsdevel@vger.kernel.org Reviewed-by: Seth Forshee <sforshee@digitalocean.com> Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
2021-12-03 11:17:07 +00:00
if (!ns_capable(fs_userns, CAP_SYS_ADMIN))
fs: introduce MOUNT_ATTR_IDMAP Introduce a new mount bind mount property to allow idmapping mounts. The MOUNT_ATTR_IDMAP flag can be set via the new mount_setattr() syscall together with a file descriptor referring to a user namespace. The user namespace referenced by the namespace file descriptor will be attached to the bind mount. All interactions with the filesystem going through that mount will be mapped according to the mapping specified in the user namespace attached to it. Using user namespaces to mark mounts means we can reuse all the existing infrastructure in the kernel that already exists to handle idmappings and can also use this for permission checking to allow unprivileged user to create idmapped mounts in the future. Idmapping a mount is decoupled from the caller's user and mount namespace. This means idmapped mounts can be created in the initial user namespace which is an important use-case for systemd-homed, portable usb-sticks between systems, sharing data between the initial user namespace and unprivileged containers, and other use-cases that have been brought up. For example, assume a home directory where all files are owned by uid and gid 1000 and the home directory is brought to a new laptop where the user has id 12345. The system administrator can simply create a mount of this home directory with a mapping of 1000:12345:1 and other mappings to indicate the ids should be kept. (With this it is e.g. also possible to create idmapped mounts on the host with an identity mapping 1:1:100000 where the root user is not mapped. A user with root access that e.g. has been pivot rooted into such a mount on the host will be not be able to execute, read, write, or create files as root.) Given that mapping a mount is decoupled from the caller's user namespace a sufficiently privileged process such as a container manager can set up an idmapped mount for the container and the container can simply pivot root to it. There's no need for the container to do anything. The mount will appear correctly mapped independent of the user namespace the container uses. This means we don't need to mark a mount as idmappable. In order to create an idmapped mount the caller must currently be privileged in the user namespace of the superblock the mount belongs to. Once a mount has been idmapped we don't allow it to change its mapping. This keeps permission checking and life-cycle management simple. Users wanting to change the idmapped can always create a new detached mount with a different idmapping. Link: https://lore.kernel.org/r/20210121131959.646623-36-christian.brauner@ubuntu.com Cc: Christoph Hellwig <hch@lst.de> Cc: David Howells <dhowells@redhat.com> Cc: Mauricio Vásquez Bernal <mauricio@kinvolk.io> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: linux-fsdevel@vger.kernel.org Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
2021-01-21 13:19:54 +00:00
return -EPERM;
/* Mount has already been visible in the filesystem hierarchy. */
if (!is_anon_ns(mnt->mnt_ns))
return -EINVAL;
return 0;
}
/**
* mnt_allow_writers() - check whether the attribute change allows writers
* @kattr: the new mount attributes
* @mnt: the mount to which @kattr will be applied
*
* Check whether thew new mount attributes in @kattr allow concurrent writers.
*
* Return: true if writers need to be held, false if not
*/
static inline bool mnt_allow_writers(const struct mount_kattr *kattr,
const struct mount *mnt)
fs: add mount_setattr() This implements the missing mount_setattr() syscall. While the new mount api allows to change the properties of a superblock there is currently no way to change the properties of a mount or a mount tree using file descriptors which the new mount api is based on. In addition the old mount api has the restriction that mount options cannot be applied recursively. This hasn't changed since changing mount options on a per-mount basis was implemented in [1] and has been a frequent request not just for convenience but also for security reasons. The legacy mount syscall is unable to accommodate this behavior without introducing a whole new set of flags because MS_REC | MS_REMOUNT | MS_BIND | MS_RDONLY | MS_NOEXEC | [...] only apply the mount option to the topmost mount. Changing MS_REC to apply to the whole mount tree would mean introducing a significant uapi change and would likely cause significant regressions. The new mount_setattr() syscall allows to recursively clear and set mount options in one shot. Multiple calls to change mount options requesting the same changes are idempotent: int mount_setattr(int dfd, const char *path, unsigned flags, struct mount_attr *uattr, size_t usize); Flags to modify path resolution behavior are specified in the @flags argument. Currently, AT_EMPTY_PATH, AT_RECURSIVE, AT_SYMLINK_NOFOLLOW, and AT_NO_AUTOMOUNT are supported. If useful, additional lookup flags to restrict path resolution as introduced with openat2() might be supported in the future. The mount_setattr() syscall can be expected to grow over time and is designed with extensibility in mind. It follows the extensible syscall pattern we have used with other syscalls such as openat2(), clone3(), sched_{set,get}attr(), and others. The set of mount options is passed in the uapi struct mount_attr which currently has the following layout: struct mount_attr { __u64 attr_set; __u64 attr_clr; __u64 propagation; __u64 userns_fd; }; The @attr_set and @attr_clr members are used to clear and set mount options. This way a user can e.g. request that a set of flags is to be raised such as turning mounts readonly by raising MOUNT_ATTR_RDONLY in @attr_set while at the same time requesting that another set of flags is to be lowered such as removing noexec from a mount tree by specifying MOUNT_ATTR_NOEXEC in @attr_clr. Note, since the MOUNT_ATTR_<atime> values are an enum starting from 0, not a bitmap, users wanting to transition to a different atime setting cannot simply specify the atime setting in @attr_set, but must also specify MOUNT_ATTR__ATIME in the @attr_clr field. So we ensure that MOUNT_ATTR__ATIME can't be partially set in @attr_clr and that @attr_set can't have any atime bits set if MOUNT_ATTR__ATIME isn't set in @attr_clr. The @propagation field lets callers specify the propagation type of a mount tree. Propagation is a single property that has four different settings and as such is not really a flag argument but an enum. Specifically, it would be unclear what setting and clearing propagation settings in combination would amount to. The legacy mount() syscall thus forbids the combination of multiple propagation settings too. The goal is to keep the semantics of mount propagation somewhat simple as they are overly complex as it is. The @userns_fd field lets user specify a user namespace whose idmapping becomes the idmapping of the mount. This is implemented and explained in detail in the next patch. [1]: commit 2e4b7fcd9260 ("[PATCH] r/o bind mounts: honor mount writer counts at remount") Link: https://lore.kernel.org/r/20210121131959.646623-35-christian.brauner@ubuntu.com Cc: David Howells <dhowells@redhat.com> Cc: Aleksa Sarai <cyphar@cyphar.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: linux-fsdevel@vger.kernel.org Cc: linux-api@vger.kernel.org Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
2021-01-21 13:19:53 +00:00
{
fs: hold writers when changing mount's idmapping Hold writers when changing a mount's idmapping to make it more robust. The vfs layer takes care to retrieve the idmapping of a mount once ensuring that the idmapping used for vfs permission checking is identical to the idmapping passed down to the filesystem. For ioctl codepaths the filesystem itself is responsible for taking the idmapping into account if they need to. While all filesystems with FS_ALLOW_IDMAP raised take the same precautions as the vfs we should enforce it explicitly by making sure there are no active writers on the relevant mount while changing the idmapping. This is similar to turning a mount ro with the difference that in contrast to turning a mount ro changing the idmapping can only ever be done once while a mount can transition between ro and rw as much as it wants. This is a minor user-visible change. But it is extremely unlikely to matter. The caller must've created a detached mount via OPEN_TREE_CLONE and then handed that O_PATH fd to another process or thread which then must've gotten a writable fd for that mount and started creating files in there while the caller is still changing mount properties. While not impossible it will be an extremely rare corner-case and should in general be considered a bug in the application. Consider making a mount MOUNT_ATTR_NOEXEC or MOUNT_ATTR_NODEV while allowing someone else to perform lookups or exec'ing in parallel by handing them a copy of the OPEN_TREE_CLONE fd or another fd beneath that mount. Link: https://lore.kernel.org/r/20220510095840.152264-1-brauner@kernel.org Cc: Seth Forshee <seth.forshee@digitalocean.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: linux-fsdevel@vger.kernel.org Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
2022-05-10 09:58:40 +00:00
return (!(kattr->attr_set & MNT_READONLY) ||
(mnt->mnt.mnt_flags & MNT_READONLY)) &&
fs: introduce dedicated idmap type for mounts Last cycle we've already made the interaction with idmapped mounts more robust and type safe by introducing the vfs{g,u}id_t type. This cycle we concluded the conversion and removed the legacy helpers. Currently we still pass around the plain namespace that was attached to a mount. This is in general pretty convenient but it makes it easy to conflate filesystem and mount namespaces and what different roles they have to play. Especially for filesystem developers without much experience in this area this is an easy source for bugs. Instead of passing the plain namespace we introduce a dedicated type struct mnt_idmap and replace the pointer with a pointer to a struct mnt_idmap. There are no semantic or size changes for the mount struct caused by this. We then start converting all places aware of idmapped mounts to rely on struct mnt_idmap. Once the conversion is done all helpers down to the really low-level make_vfs{g,u}id() and from_vfs{g,u}id() will take a struct mnt_idmap argument instead of two namespace arguments. This way it becomes impossible to conflate the two, removing and thus eliminating the possibility of any bugs. Fwiw, I fixed some issues in that area a while ago in ntfs3 and ksmbd in the past. Afterwards, only low-level code can ultimately use the associated namespace for any permission checks. Even most of the vfs can be ultimately completely oblivious about this and filesystems will never interact with it directly in any form in the future. A struct mnt_idmap currently encompasses a simple refcount and a pointer to the relevant namespace the mount is idmapped to. If a mount isn't idmapped then it will point to a static nop_mnt_idmap. If it is an idmapped mount it will point to a new struct mnt_idmap. As usual there are no allocations or anything happening for non-idmapped mounts. Everthing is carefully written to be a nop for non-idmapped mounts as has always been the case. If an idmapped mount or mount tree is created a new struct mnt_idmap is allocated and a reference taken on the relevant namespace. For each mount in a mount tree that gets idmapped or a mount that inherits the idmap when it is cloned the reference count on the associated struct mnt_idmap is bumped. Just a reminder that we only allow a mount to change it's idmapping a single time and only if it hasn't already been attached to the filesystems and has no active writers. The actual changes are fairly straightforward. This will have huge benefits for maintenance and security in the long run even if it causes some churn. I'm aware that there's some cost for all of you. And I'll commit to doing this work and make this as painless as I can. Note that this also makes it possible to extend struct mount_idmap in the future. For example, it would be possible to place the namespace pointer in an anonymous union together with an idmapping struct. This would allow us to expose an api to userspace that would let it specify idmappings directly instead of having to go through the detour of setting up namespaces at all. This just adds the infrastructure and doesn't do any conversions. Reviewed-by: Seth Forshee (DigitalOcean) <sforshee@kernel.org> Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
2022-10-26 10:51:27 +00:00
!kattr->mnt_idmap;
}
fs: add mount_setattr() This implements the missing mount_setattr() syscall. While the new mount api allows to change the properties of a superblock there is currently no way to change the properties of a mount or a mount tree using file descriptors which the new mount api is based on. In addition the old mount api has the restriction that mount options cannot be applied recursively. This hasn't changed since changing mount options on a per-mount basis was implemented in [1] and has been a frequent request not just for convenience but also for security reasons. The legacy mount syscall is unable to accommodate this behavior without introducing a whole new set of flags because MS_REC | MS_REMOUNT | MS_BIND | MS_RDONLY | MS_NOEXEC | [...] only apply the mount option to the topmost mount. Changing MS_REC to apply to the whole mount tree would mean introducing a significant uapi change and would likely cause significant regressions. The new mount_setattr() syscall allows to recursively clear and set mount options in one shot. Multiple calls to change mount options requesting the same changes are idempotent: int mount_setattr(int dfd, const char *path, unsigned flags, struct mount_attr *uattr, size_t usize); Flags to modify path resolution behavior are specified in the @flags argument. Currently, AT_EMPTY_PATH, AT_RECURSIVE, AT_SYMLINK_NOFOLLOW, and AT_NO_AUTOMOUNT are supported. If useful, additional lookup flags to restrict path resolution as introduced with openat2() might be supported in the future. The mount_setattr() syscall can be expected to grow over time and is designed with extensibility in mind. It follows the extensible syscall pattern we have used with other syscalls such as openat2(), clone3(), sched_{set,get}attr(), and others. The set of mount options is passed in the uapi struct mount_attr which currently has the following layout: struct mount_attr { __u64 attr_set; __u64 attr_clr; __u64 propagation; __u64 userns_fd; }; The @attr_set and @attr_clr members are used to clear and set mount options. This way a user can e.g. request that a set of flags is to be raised such as turning mounts readonly by raising MOUNT_ATTR_RDONLY in @attr_set while at the same time requesting that another set of flags is to be lowered such as removing noexec from a mount tree by specifying MOUNT_ATTR_NOEXEC in @attr_clr. Note, since the MOUNT_ATTR_<atime> values are an enum starting from 0, not a bitmap, users wanting to transition to a different atime setting cannot simply specify the atime setting in @attr_set, but must also specify MOUNT_ATTR__ATIME in the @attr_clr field. So we ensure that MOUNT_ATTR__ATIME can't be partially set in @attr_clr and that @attr_set can't have any atime bits set if MOUNT_ATTR__ATIME isn't set in @attr_clr. The @propagation field lets callers specify the propagation type of a mount tree. Propagation is a single property that has four different settings and as such is not really a flag argument but an enum. Specifically, it would be unclear what setting and clearing propagation settings in combination would amount to. The legacy mount() syscall thus forbids the combination of multiple propagation settings too. The goal is to keep the semantics of mount propagation somewhat simple as they are overly complex as it is. The @userns_fd field lets user specify a user namespace whose idmapping becomes the idmapping of the mount. This is implemented and explained in detail in the next patch. [1]: commit 2e4b7fcd9260 ("[PATCH] r/o bind mounts: honor mount writer counts at remount") Link: https://lore.kernel.org/r/20210121131959.646623-35-christian.brauner@ubuntu.com Cc: David Howells <dhowells@redhat.com> Cc: Aleksa Sarai <cyphar@cyphar.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: linux-fsdevel@vger.kernel.org Cc: linux-api@vger.kernel.org Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
2021-01-21 13:19:53 +00:00
static int mount_setattr_prepare(struct mount_kattr *kattr, struct mount *mnt)
fs: add mount_setattr() This implements the missing mount_setattr() syscall. While the new mount api allows to change the properties of a superblock there is currently no way to change the properties of a mount or a mount tree using file descriptors which the new mount api is based on. In addition the old mount api has the restriction that mount options cannot be applied recursively. This hasn't changed since changing mount options on a per-mount basis was implemented in [1] and has been a frequent request not just for convenience but also for security reasons. The legacy mount syscall is unable to accommodate this behavior without introducing a whole new set of flags because MS_REC | MS_REMOUNT | MS_BIND | MS_RDONLY | MS_NOEXEC | [...] only apply the mount option to the topmost mount. Changing MS_REC to apply to the whole mount tree would mean introducing a significant uapi change and would likely cause significant regressions. The new mount_setattr() syscall allows to recursively clear and set mount options in one shot. Multiple calls to change mount options requesting the same changes are idempotent: int mount_setattr(int dfd, const char *path, unsigned flags, struct mount_attr *uattr, size_t usize); Flags to modify path resolution behavior are specified in the @flags argument. Currently, AT_EMPTY_PATH, AT_RECURSIVE, AT_SYMLINK_NOFOLLOW, and AT_NO_AUTOMOUNT are supported. If useful, additional lookup flags to restrict path resolution as introduced with openat2() might be supported in the future. The mount_setattr() syscall can be expected to grow over time and is designed with extensibility in mind. It follows the extensible syscall pattern we have used with other syscalls such as openat2(), clone3(), sched_{set,get}attr(), and others. The set of mount options is passed in the uapi struct mount_attr which currently has the following layout: struct mount_attr { __u64 attr_set; __u64 attr_clr; __u64 propagation; __u64 userns_fd; }; The @attr_set and @attr_clr members are used to clear and set mount options. This way a user can e.g. request that a set of flags is to be raised such as turning mounts readonly by raising MOUNT_ATTR_RDONLY in @attr_set while at the same time requesting that another set of flags is to be lowered such as removing noexec from a mount tree by specifying MOUNT_ATTR_NOEXEC in @attr_clr. Note, since the MOUNT_ATTR_<atime> values are an enum starting from 0, not a bitmap, users wanting to transition to a different atime setting cannot simply specify the atime setting in @attr_set, but must also specify MOUNT_ATTR__ATIME in the @attr_clr field. So we ensure that MOUNT_ATTR__ATIME can't be partially set in @attr_clr and that @attr_set can't have any atime bits set if MOUNT_ATTR__ATIME isn't set in @attr_clr. The @propagation field lets callers specify the propagation type of a mount tree. Propagation is a single property that has four different settings and as such is not really a flag argument but an enum. Specifically, it would be unclear what setting and clearing propagation settings in combination would amount to. The legacy mount() syscall thus forbids the combination of multiple propagation settings too. The goal is to keep the semantics of mount propagation somewhat simple as they are overly complex as it is. The @userns_fd field lets user specify a user namespace whose idmapping becomes the idmapping of the mount. This is implemented and explained in detail in the next patch. [1]: commit 2e4b7fcd9260 ("[PATCH] r/o bind mounts: honor mount writer counts at remount") Link: https://lore.kernel.org/r/20210121131959.646623-35-christian.brauner@ubuntu.com Cc: David Howells <dhowells@redhat.com> Cc: Aleksa Sarai <cyphar@cyphar.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: linux-fsdevel@vger.kernel.org Cc: linux-api@vger.kernel.org Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
2021-01-21 13:19:53 +00:00
{
struct mount *m;
int err;
fs: add mount_setattr() This implements the missing mount_setattr() syscall. While the new mount api allows to change the properties of a superblock there is currently no way to change the properties of a mount or a mount tree using file descriptors which the new mount api is based on. In addition the old mount api has the restriction that mount options cannot be applied recursively. This hasn't changed since changing mount options on a per-mount basis was implemented in [1] and has been a frequent request not just for convenience but also for security reasons. The legacy mount syscall is unable to accommodate this behavior without introducing a whole new set of flags because MS_REC | MS_REMOUNT | MS_BIND | MS_RDONLY | MS_NOEXEC | [...] only apply the mount option to the topmost mount. Changing MS_REC to apply to the whole mount tree would mean introducing a significant uapi change and would likely cause significant regressions. The new mount_setattr() syscall allows to recursively clear and set mount options in one shot. Multiple calls to change mount options requesting the same changes are idempotent: int mount_setattr(int dfd, const char *path, unsigned flags, struct mount_attr *uattr, size_t usize); Flags to modify path resolution behavior are specified in the @flags argument. Currently, AT_EMPTY_PATH, AT_RECURSIVE, AT_SYMLINK_NOFOLLOW, and AT_NO_AUTOMOUNT are supported. If useful, additional lookup flags to restrict path resolution as introduced with openat2() might be supported in the future. The mount_setattr() syscall can be expected to grow over time and is designed with extensibility in mind. It follows the extensible syscall pattern we have used with other syscalls such as openat2(), clone3(), sched_{set,get}attr(), and others. The set of mount options is passed in the uapi struct mount_attr which currently has the following layout: struct mount_attr { __u64 attr_set; __u64 attr_clr; __u64 propagation; __u64 userns_fd; }; The @attr_set and @attr_clr members are used to clear and set mount options. This way a user can e.g. request that a set of flags is to be raised such as turning mounts readonly by raising MOUNT_ATTR_RDONLY in @attr_set while at the same time requesting that another set of flags is to be lowered such as removing noexec from a mount tree by specifying MOUNT_ATTR_NOEXEC in @attr_clr. Note, since the MOUNT_ATTR_<atime> values are an enum starting from 0, not a bitmap, users wanting to transition to a different atime setting cannot simply specify the atime setting in @attr_set, but must also specify MOUNT_ATTR__ATIME in the @attr_clr field. So we ensure that MOUNT_ATTR__ATIME can't be partially set in @attr_clr and that @attr_set can't have any atime bits set if MOUNT_ATTR__ATIME isn't set in @attr_clr. The @propagation field lets callers specify the propagation type of a mount tree. Propagation is a single property that has four different settings and as such is not really a flag argument but an enum. Specifically, it would be unclear what setting and clearing propagation settings in combination would amount to. The legacy mount() syscall thus forbids the combination of multiple propagation settings too. The goal is to keep the semantics of mount propagation somewhat simple as they are overly complex as it is. The @userns_fd field lets user specify a user namespace whose idmapping becomes the idmapping of the mount. This is implemented and explained in detail in the next patch. [1]: commit 2e4b7fcd9260 ("[PATCH] r/o bind mounts: honor mount writer counts at remount") Link: https://lore.kernel.org/r/20210121131959.646623-35-christian.brauner@ubuntu.com Cc: David Howells <dhowells@redhat.com> Cc: Aleksa Sarai <cyphar@cyphar.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: linux-fsdevel@vger.kernel.org Cc: linux-api@vger.kernel.org Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
2021-01-21 13:19:53 +00:00
for (m = mnt; m; m = next_mnt(m, mnt)) {
if (!can_change_locked_flags(m, recalc_flags(kattr, m))) {
err = -EPERM;
break;
}
fs: add mount_setattr() This implements the missing mount_setattr() syscall. While the new mount api allows to change the properties of a superblock there is currently no way to change the properties of a mount or a mount tree using file descriptors which the new mount api is based on. In addition the old mount api has the restriction that mount options cannot be applied recursively. This hasn't changed since changing mount options on a per-mount basis was implemented in [1] and has been a frequent request not just for convenience but also for security reasons. The legacy mount syscall is unable to accommodate this behavior without introducing a whole new set of flags because MS_REC | MS_REMOUNT | MS_BIND | MS_RDONLY | MS_NOEXEC | [...] only apply the mount option to the topmost mount. Changing MS_REC to apply to the whole mount tree would mean introducing a significant uapi change and would likely cause significant regressions. The new mount_setattr() syscall allows to recursively clear and set mount options in one shot. Multiple calls to change mount options requesting the same changes are idempotent: int mount_setattr(int dfd, const char *path, unsigned flags, struct mount_attr *uattr, size_t usize); Flags to modify path resolution behavior are specified in the @flags argument. Currently, AT_EMPTY_PATH, AT_RECURSIVE, AT_SYMLINK_NOFOLLOW, and AT_NO_AUTOMOUNT are supported. If useful, additional lookup flags to restrict path resolution as introduced with openat2() might be supported in the future. The mount_setattr() syscall can be expected to grow over time and is designed with extensibility in mind. It follows the extensible syscall pattern we have used with other syscalls such as openat2(), clone3(), sched_{set,get}attr(), and others. The set of mount options is passed in the uapi struct mount_attr which currently has the following layout: struct mount_attr { __u64 attr_set; __u64 attr_clr; __u64 propagation; __u64 userns_fd; }; The @attr_set and @attr_clr members are used to clear and set mount options. This way a user can e.g. request that a set of flags is to be raised such as turning mounts readonly by raising MOUNT_ATTR_RDONLY in @attr_set while at the same time requesting that another set of flags is to be lowered such as removing noexec from a mount tree by specifying MOUNT_ATTR_NOEXEC in @attr_clr. Note, since the MOUNT_ATTR_<atime> values are an enum starting from 0, not a bitmap, users wanting to transition to a different atime setting cannot simply specify the atime setting in @attr_set, but must also specify MOUNT_ATTR__ATIME in the @attr_clr field. So we ensure that MOUNT_ATTR__ATIME can't be partially set in @attr_clr and that @attr_set can't have any atime bits set if MOUNT_ATTR__ATIME isn't set in @attr_clr. The @propagation field lets callers specify the propagation type of a mount tree. Propagation is a single property that has four different settings and as such is not really a flag argument but an enum. Specifically, it would be unclear what setting and clearing propagation settings in combination would amount to. The legacy mount() syscall thus forbids the combination of multiple propagation settings too. The goal is to keep the semantics of mount propagation somewhat simple as they are overly complex as it is. The @userns_fd field lets user specify a user namespace whose idmapping becomes the idmapping of the mount. This is implemented and explained in detail in the next patch. [1]: commit 2e4b7fcd9260 ("[PATCH] r/o bind mounts: honor mount writer counts at remount") Link: https://lore.kernel.org/r/20210121131959.646623-35-christian.brauner@ubuntu.com Cc: David Howells <dhowells@redhat.com> Cc: Aleksa Sarai <cyphar@cyphar.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: linux-fsdevel@vger.kernel.org Cc: linux-api@vger.kernel.org Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
2021-01-21 13:19:53 +00:00
err = can_idmap_mount(kattr, m);
if (err)
break;
fs: add mount_setattr() This implements the missing mount_setattr() syscall. While the new mount api allows to change the properties of a superblock there is currently no way to change the properties of a mount or a mount tree using file descriptors which the new mount api is based on. In addition the old mount api has the restriction that mount options cannot be applied recursively. This hasn't changed since changing mount options on a per-mount basis was implemented in [1] and has been a frequent request not just for convenience but also for security reasons. The legacy mount syscall is unable to accommodate this behavior without introducing a whole new set of flags because MS_REC | MS_REMOUNT | MS_BIND | MS_RDONLY | MS_NOEXEC | [...] only apply the mount option to the topmost mount. Changing MS_REC to apply to the whole mount tree would mean introducing a significant uapi change and would likely cause significant regressions. The new mount_setattr() syscall allows to recursively clear and set mount options in one shot. Multiple calls to change mount options requesting the same changes are idempotent: int mount_setattr(int dfd, const char *path, unsigned flags, struct mount_attr *uattr, size_t usize); Flags to modify path resolution behavior are specified in the @flags argument. Currently, AT_EMPTY_PATH, AT_RECURSIVE, AT_SYMLINK_NOFOLLOW, and AT_NO_AUTOMOUNT are supported. If useful, additional lookup flags to restrict path resolution as introduced with openat2() might be supported in the future. The mount_setattr() syscall can be expected to grow over time and is designed with extensibility in mind. It follows the extensible syscall pattern we have used with other syscalls such as openat2(), clone3(), sched_{set,get}attr(), and others. The set of mount options is passed in the uapi struct mount_attr which currently has the following layout: struct mount_attr { __u64 attr_set; __u64 attr_clr; __u64 propagation; __u64 userns_fd; }; The @attr_set and @attr_clr members are used to clear and set mount options. This way a user can e.g. request that a set of flags is to be raised such as turning mounts readonly by raising MOUNT_ATTR_RDONLY in @attr_set while at the same time requesting that another set of flags is to be lowered such as removing noexec from a mount tree by specifying MOUNT_ATTR_NOEXEC in @attr_clr. Note, since the MOUNT_ATTR_<atime> values are an enum starting from 0, not a bitmap, users wanting to transition to a different atime setting cannot simply specify the atime setting in @attr_set, but must also specify MOUNT_ATTR__ATIME in the @attr_clr field. So we ensure that MOUNT_ATTR__ATIME can't be partially set in @attr_clr and that @attr_set can't have any atime bits set if MOUNT_ATTR__ATIME isn't set in @attr_clr. The @propagation field lets callers specify the propagation type of a mount tree. Propagation is a single property that has four different settings and as such is not really a flag argument but an enum. Specifically, it would be unclear what setting and clearing propagation settings in combination would amount to. The legacy mount() syscall thus forbids the combination of multiple propagation settings too. The goal is to keep the semantics of mount propagation somewhat simple as they are overly complex as it is. The @userns_fd field lets user specify a user namespace whose idmapping becomes the idmapping of the mount. This is implemented and explained in detail in the next patch. [1]: commit 2e4b7fcd9260 ("[PATCH] r/o bind mounts: honor mount writer counts at remount") Link: https://lore.kernel.org/r/20210121131959.646623-35-christian.brauner@ubuntu.com Cc: David Howells <dhowells@redhat.com> Cc: Aleksa Sarai <cyphar@cyphar.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: linux-fsdevel@vger.kernel.org Cc: linux-api@vger.kernel.org Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
2021-01-21 13:19:53 +00:00
if (!mnt_allow_writers(kattr, m)) {
err = mnt_hold_writers(m);
if (err)
break;
fs: add mount_setattr() This implements the missing mount_setattr() syscall. While the new mount api allows to change the properties of a superblock there is currently no way to change the properties of a mount or a mount tree using file descriptors which the new mount api is based on. In addition the old mount api has the restriction that mount options cannot be applied recursively. This hasn't changed since changing mount options on a per-mount basis was implemented in [1] and has been a frequent request not just for convenience but also for security reasons. The legacy mount syscall is unable to accommodate this behavior without introducing a whole new set of flags because MS_REC | MS_REMOUNT | MS_BIND | MS_RDONLY | MS_NOEXEC | [...] only apply the mount option to the topmost mount. Changing MS_REC to apply to the whole mount tree would mean introducing a significant uapi change and would likely cause significant regressions. The new mount_setattr() syscall allows to recursively clear and set mount options in one shot. Multiple calls to change mount options requesting the same changes are idempotent: int mount_setattr(int dfd, const char *path, unsigned flags, struct mount_attr *uattr, size_t usize); Flags to modify path resolution behavior are specified in the @flags argument. Currently, AT_EMPTY_PATH, AT_RECURSIVE, AT_SYMLINK_NOFOLLOW, and AT_NO_AUTOMOUNT are supported. If useful, additional lookup flags to restrict path resolution as introduced with openat2() might be supported in the future. The mount_setattr() syscall can be expected to grow over time and is designed with extensibility in mind. It follows the extensible syscall pattern we have used with other syscalls such as openat2(), clone3(), sched_{set,get}attr(), and others. The set of mount options is passed in the uapi struct mount_attr which currently has the following layout: struct mount_attr { __u64 attr_set; __u64 attr_clr; __u64 propagation; __u64 userns_fd; }; The @attr_set and @attr_clr members are used to clear and set mount options. This way a user can e.g. request that a set of flags is to be raised such as turning mounts readonly by raising MOUNT_ATTR_RDONLY in @attr_set while at the same time requesting that another set of flags is to be lowered such as removing noexec from a mount tree by specifying MOUNT_ATTR_NOEXEC in @attr_clr. Note, since the MOUNT_ATTR_<atime> values are an enum starting from 0, not a bitmap, users wanting to transition to a different atime setting cannot simply specify the atime setting in @attr_set, but must also specify MOUNT_ATTR__ATIME in the @attr_clr field. So we ensure that MOUNT_ATTR__ATIME can't be partially set in @attr_clr and that @attr_set can't have any atime bits set if MOUNT_ATTR__ATIME isn't set in @attr_clr. The @propagation field lets callers specify the propagation type of a mount tree. Propagation is a single property that has four different settings and as such is not really a flag argument but an enum. Specifically, it would be unclear what setting and clearing propagation settings in combination would amount to. The legacy mount() syscall thus forbids the combination of multiple propagation settings too. The goal is to keep the semantics of mount propagation somewhat simple as they are overly complex as it is. The @userns_fd field lets user specify a user namespace whose idmapping becomes the idmapping of the mount. This is implemented and explained in detail in the next patch. [1]: commit 2e4b7fcd9260 ("[PATCH] r/o bind mounts: honor mount writer counts at remount") Link: https://lore.kernel.org/r/20210121131959.646623-35-christian.brauner@ubuntu.com Cc: David Howells <dhowells@redhat.com> Cc: Aleksa Sarai <cyphar@cyphar.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: linux-fsdevel@vger.kernel.org Cc: linux-api@vger.kernel.org Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
2021-01-21 13:19:53 +00:00
}
if (!kattr->recurse)
return 0;
}
fs: introduce MOUNT_ATTR_IDMAP Introduce a new mount bind mount property to allow idmapping mounts. The MOUNT_ATTR_IDMAP flag can be set via the new mount_setattr() syscall together with a file descriptor referring to a user namespace. The user namespace referenced by the namespace file descriptor will be attached to the bind mount. All interactions with the filesystem going through that mount will be mapped according to the mapping specified in the user namespace attached to it. Using user namespaces to mark mounts means we can reuse all the existing infrastructure in the kernel that already exists to handle idmappings and can also use this for permission checking to allow unprivileged user to create idmapped mounts in the future. Idmapping a mount is decoupled from the caller's user and mount namespace. This means idmapped mounts can be created in the initial user namespace which is an important use-case for systemd-homed, portable usb-sticks between systems, sharing data between the initial user namespace and unprivileged containers, and other use-cases that have been brought up. For example, assume a home directory where all files are owned by uid and gid 1000 and the home directory is brought to a new laptop where the user has id 12345. The system administrator can simply create a mount of this home directory with a mapping of 1000:12345:1 and other mappings to indicate the ids should be kept. (With this it is e.g. also possible to create idmapped mounts on the host with an identity mapping 1:1:100000 where the root user is not mapped. A user with root access that e.g. has been pivot rooted into such a mount on the host will be not be able to execute, read, write, or create files as root.) Given that mapping a mount is decoupled from the caller's user namespace a sufficiently privileged process such as a container manager can set up an idmapped mount for the container and the container can simply pivot root to it. There's no need for the container to do anything. The mount will appear correctly mapped independent of the user namespace the container uses. This means we don't need to mark a mount as idmappable. In order to create an idmapped mount the caller must currently be privileged in the user namespace of the superblock the mount belongs to. Once a mount has been idmapped we don't allow it to change its mapping. This keeps permission checking and life-cycle management simple. Users wanting to change the idmapped can always create a new detached mount with a different idmapping. Link: https://lore.kernel.org/r/20210121131959.646623-36-christian.brauner@ubuntu.com Cc: Christoph Hellwig <hch@lst.de> Cc: David Howells <dhowells@redhat.com> Cc: Mauricio Vásquez Bernal <mauricio@kinvolk.io> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: linux-fsdevel@vger.kernel.org Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
2021-01-21 13:19:54 +00:00
if (err) {
struct mount *p;
fs: add mount_setattr() This implements the missing mount_setattr() syscall. While the new mount api allows to change the properties of a superblock there is currently no way to change the properties of a mount or a mount tree using file descriptors which the new mount api is based on. In addition the old mount api has the restriction that mount options cannot be applied recursively. This hasn't changed since changing mount options on a per-mount basis was implemented in [1] and has been a frequent request not just for convenience but also for security reasons. The legacy mount syscall is unable to accommodate this behavior without introducing a whole new set of flags because MS_REC | MS_REMOUNT | MS_BIND | MS_RDONLY | MS_NOEXEC | [...] only apply the mount option to the topmost mount. Changing MS_REC to apply to the whole mount tree would mean introducing a significant uapi change and would likely cause significant regressions. The new mount_setattr() syscall allows to recursively clear and set mount options in one shot. Multiple calls to change mount options requesting the same changes are idempotent: int mount_setattr(int dfd, const char *path, unsigned flags, struct mount_attr *uattr, size_t usize); Flags to modify path resolution behavior are specified in the @flags argument. Currently, AT_EMPTY_PATH, AT_RECURSIVE, AT_SYMLINK_NOFOLLOW, and AT_NO_AUTOMOUNT are supported. If useful, additional lookup flags to restrict path resolution as introduced with openat2() might be supported in the future. The mount_setattr() syscall can be expected to grow over time and is designed with extensibility in mind. It follows the extensible syscall pattern we have used with other syscalls such as openat2(), clone3(), sched_{set,get}attr(), and others. The set of mount options is passed in the uapi struct mount_attr which currently has the following layout: struct mount_attr { __u64 attr_set; __u64 attr_clr; __u64 propagation; __u64 userns_fd; }; The @attr_set and @attr_clr members are used to clear and set mount options. This way a user can e.g. request that a set of flags is to be raised such as turning mounts readonly by raising MOUNT_ATTR_RDONLY in @attr_set while at the same time requesting that another set of flags is to be lowered such as removing noexec from a mount tree by specifying MOUNT_ATTR_NOEXEC in @attr_clr. Note, since the MOUNT_ATTR_<atime> values are an enum starting from 0, not a bitmap, users wanting to transition to a different atime setting cannot simply specify the atime setting in @attr_set, but must also specify MOUNT_ATTR__ATIME in the @attr_clr field. So we ensure that MOUNT_ATTR__ATIME can't be partially set in @attr_clr and that @attr_set can't have any atime bits set if MOUNT_ATTR__ATIME isn't set in @attr_clr. The @propagation field lets callers specify the propagation type of a mount tree. Propagation is a single property that has four different settings and as such is not really a flag argument but an enum. Specifically, it would be unclear what setting and clearing propagation settings in combination would amount to. The legacy mount() syscall thus forbids the combination of multiple propagation settings too. The goal is to keep the semantics of mount propagation somewhat simple as they are overly complex as it is. The @userns_fd field lets user specify a user namespace whose idmapping becomes the idmapping of the mount. This is implemented and explained in detail in the next patch. [1]: commit 2e4b7fcd9260 ("[PATCH] r/o bind mounts: honor mount writer counts at remount") Link: https://lore.kernel.org/r/20210121131959.646623-35-christian.brauner@ubuntu.com Cc: David Howells <dhowells@redhat.com> Cc: Aleksa Sarai <cyphar@cyphar.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: linux-fsdevel@vger.kernel.org Cc: linux-api@vger.kernel.org Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
2021-01-21 13:19:53 +00:00
/*
* If we had to call mnt_hold_writers() MNT_WRITE_HOLD will
* be set in @mnt_flags. The loop unsets MNT_WRITE_HOLD for all
* mounts and needs to take care to include the first mount.
*/
for (p = mnt; p; p = next_mnt(p, mnt)) {
/* If we had to hold writers unblock them. */
if (p->mnt.mnt_flags & MNT_WRITE_HOLD)
mnt_unhold_writers(p);
/*
* We're done once the first mount we changed got
* MNT_WRITE_HOLD unset.
*/
if (p == m)
break;
fs: add mount_setattr() This implements the missing mount_setattr() syscall. While the new mount api allows to change the properties of a superblock there is currently no way to change the properties of a mount or a mount tree using file descriptors which the new mount api is based on. In addition the old mount api has the restriction that mount options cannot be applied recursively. This hasn't changed since changing mount options on a per-mount basis was implemented in [1] and has been a frequent request not just for convenience but also for security reasons. The legacy mount syscall is unable to accommodate this behavior without introducing a whole new set of flags because MS_REC | MS_REMOUNT | MS_BIND | MS_RDONLY | MS_NOEXEC | [...] only apply the mount option to the topmost mount. Changing MS_REC to apply to the whole mount tree would mean introducing a significant uapi change and would likely cause significant regressions. The new mount_setattr() syscall allows to recursively clear and set mount options in one shot. Multiple calls to change mount options requesting the same changes are idempotent: int mount_setattr(int dfd, const char *path, unsigned flags, struct mount_attr *uattr, size_t usize); Flags to modify path resolution behavior are specified in the @flags argument. Currently, AT_EMPTY_PATH, AT_RECURSIVE, AT_SYMLINK_NOFOLLOW, and AT_NO_AUTOMOUNT are supported. If useful, additional lookup flags to restrict path resolution as introduced with openat2() might be supported in the future. The mount_setattr() syscall can be expected to grow over time and is designed with extensibility in mind. It follows the extensible syscall pattern we have used with other syscalls such as openat2(), clone3(), sched_{set,get}attr(), and others. The set of mount options is passed in the uapi struct mount_attr which currently has the following layout: struct mount_attr { __u64 attr_set; __u64 attr_clr; __u64 propagation; __u64 userns_fd; }; The @attr_set and @attr_clr members are used to clear and set mount options. This way a user can e.g. request that a set of flags is to be raised such as turning mounts readonly by raising MOUNT_ATTR_RDONLY in @attr_set while at the same time requesting that another set of flags is to be lowered such as removing noexec from a mount tree by specifying MOUNT_ATTR_NOEXEC in @attr_clr. Note, since the MOUNT_ATTR_<atime> values are an enum starting from 0, not a bitmap, users wanting to transition to a different atime setting cannot simply specify the atime setting in @attr_set, but must also specify MOUNT_ATTR__ATIME in the @attr_clr field. So we ensure that MOUNT_ATTR__ATIME can't be partially set in @attr_clr and that @attr_set can't have any atime bits set if MOUNT_ATTR__ATIME isn't set in @attr_clr. The @propagation field lets callers specify the propagation type of a mount tree. Propagation is a single property that has four different settings and as such is not really a flag argument but an enum. Specifically, it would be unclear what setting and clearing propagation settings in combination would amount to. The legacy mount() syscall thus forbids the combination of multiple propagation settings too. The goal is to keep the semantics of mount propagation somewhat simple as they are overly complex as it is. The @userns_fd field lets user specify a user namespace whose idmapping becomes the idmapping of the mount. This is implemented and explained in detail in the next patch. [1]: commit 2e4b7fcd9260 ("[PATCH] r/o bind mounts: honor mount writer counts at remount") Link: https://lore.kernel.org/r/20210121131959.646623-35-christian.brauner@ubuntu.com Cc: David Howells <dhowells@redhat.com> Cc: Aleksa Sarai <cyphar@cyphar.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: linux-fsdevel@vger.kernel.org Cc: linux-api@vger.kernel.org Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
2021-01-21 13:19:53 +00:00
}
}
return err;
fs: add mount_setattr() This implements the missing mount_setattr() syscall. While the new mount api allows to change the properties of a superblock there is currently no way to change the properties of a mount or a mount tree using file descriptors which the new mount api is based on. In addition the old mount api has the restriction that mount options cannot be applied recursively. This hasn't changed since changing mount options on a per-mount basis was implemented in [1] and has been a frequent request not just for convenience but also for security reasons. The legacy mount syscall is unable to accommodate this behavior without introducing a whole new set of flags because MS_REC | MS_REMOUNT | MS_BIND | MS_RDONLY | MS_NOEXEC | [...] only apply the mount option to the topmost mount. Changing MS_REC to apply to the whole mount tree would mean introducing a significant uapi change and would likely cause significant regressions. The new mount_setattr() syscall allows to recursively clear and set mount options in one shot. Multiple calls to change mount options requesting the same changes are idempotent: int mount_setattr(int dfd, const char *path, unsigned flags, struct mount_attr *uattr, size_t usize); Flags to modify path resolution behavior are specified in the @flags argument. Currently, AT_EMPTY_PATH, AT_RECURSIVE, AT_SYMLINK_NOFOLLOW, and AT_NO_AUTOMOUNT are supported. If useful, additional lookup flags to restrict path resolution as introduced with openat2() might be supported in the future. The mount_setattr() syscall can be expected to grow over time and is designed with extensibility in mind. It follows the extensible syscall pattern we have used with other syscalls such as openat2(), clone3(), sched_{set,get}attr(), and others. The set of mount options is passed in the uapi struct mount_attr which currently has the following layout: struct mount_attr { __u64 attr_set; __u64 attr_clr; __u64 propagation; __u64 userns_fd; }; The @attr_set and @attr_clr members are used to clear and set mount options. This way a user can e.g. request that a set of flags is to be raised such as turning mounts readonly by raising MOUNT_ATTR_RDONLY in @attr_set while at the same time requesting that another set of flags is to be lowered such as removing noexec from a mount tree by specifying MOUNT_ATTR_NOEXEC in @attr_clr. Note, since the MOUNT_ATTR_<atime> values are an enum starting from 0, not a bitmap, users wanting to transition to a different atime setting cannot simply specify the atime setting in @attr_set, but must also specify MOUNT_ATTR__ATIME in the @attr_clr field. So we ensure that MOUNT_ATTR__ATIME can't be partially set in @attr_clr and that @attr_set can't have any atime bits set if MOUNT_ATTR__ATIME isn't set in @attr_clr. The @propagation field lets callers specify the propagation type of a mount tree. Propagation is a single property that has four different settings and as such is not really a flag argument but an enum. Specifically, it would be unclear what setting and clearing propagation settings in combination would amount to. The legacy mount() syscall thus forbids the combination of multiple propagation settings too. The goal is to keep the semantics of mount propagation somewhat simple as they are overly complex as it is. The @userns_fd field lets user specify a user namespace whose idmapping becomes the idmapping of the mount. This is implemented and explained in detail in the next patch. [1]: commit 2e4b7fcd9260 ("[PATCH] r/o bind mounts: honor mount writer counts at remount") Link: https://lore.kernel.org/r/20210121131959.646623-35-christian.brauner@ubuntu.com Cc: David Howells <dhowells@redhat.com> Cc: Aleksa Sarai <cyphar@cyphar.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: linux-fsdevel@vger.kernel.org Cc: linux-api@vger.kernel.org Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
2021-01-21 13:19:53 +00:00
}
fs: introduce MOUNT_ATTR_IDMAP Introduce a new mount bind mount property to allow idmapping mounts. The MOUNT_ATTR_IDMAP flag can be set via the new mount_setattr() syscall together with a file descriptor referring to a user namespace. The user namespace referenced by the namespace file descriptor will be attached to the bind mount. All interactions with the filesystem going through that mount will be mapped according to the mapping specified in the user namespace attached to it. Using user namespaces to mark mounts means we can reuse all the existing infrastructure in the kernel that already exists to handle idmappings and can also use this for permission checking to allow unprivileged user to create idmapped mounts in the future. Idmapping a mount is decoupled from the caller's user and mount namespace. This means idmapped mounts can be created in the initial user namespace which is an important use-case for systemd-homed, portable usb-sticks between systems, sharing data between the initial user namespace and unprivileged containers, and other use-cases that have been brought up. For example, assume a home directory where all files are owned by uid and gid 1000 and the home directory is brought to a new laptop where the user has id 12345. The system administrator can simply create a mount of this home directory with a mapping of 1000:12345:1 and other mappings to indicate the ids should be kept. (With this it is e.g. also possible to create idmapped mounts on the host with an identity mapping 1:1:100000 where the root user is not mapped. A user with root access that e.g. has been pivot rooted into such a mount on the host will be not be able to execute, read, write, or create files as root.) Given that mapping a mount is decoupled from the caller's user namespace a sufficiently privileged process such as a container manager can set up an idmapped mount for the container and the container can simply pivot root to it. There's no need for the container to do anything. The mount will appear correctly mapped independent of the user namespace the container uses. This means we don't need to mark a mount as idmappable. In order to create an idmapped mount the caller must currently be privileged in the user namespace of the superblock the mount belongs to. Once a mount has been idmapped we don't allow it to change its mapping. This keeps permission checking and life-cycle management simple. Users wanting to change the idmapped can always create a new detached mount with a different idmapping. Link: https://lore.kernel.org/r/20210121131959.646623-36-christian.brauner@ubuntu.com Cc: Christoph Hellwig <hch@lst.de> Cc: David Howells <dhowells@redhat.com> Cc: Mauricio Vásquez Bernal <mauricio@kinvolk.io> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: linux-fsdevel@vger.kernel.org Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
2021-01-21 13:19:54 +00:00
static void do_idmap_mount(const struct mount_kattr *kattr, struct mount *mnt)
{
fs: introduce dedicated idmap type for mounts Last cycle we've already made the interaction with idmapped mounts more robust and type safe by introducing the vfs{g,u}id_t type. This cycle we concluded the conversion and removed the legacy helpers. Currently we still pass around the plain namespace that was attached to a mount. This is in general pretty convenient but it makes it easy to conflate filesystem and mount namespaces and what different roles they have to play. Especially for filesystem developers without much experience in this area this is an easy source for bugs. Instead of passing the plain namespace we introduce a dedicated type struct mnt_idmap and replace the pointer with a pointer to a struct mnt_idmap. There are no semantic or size changes for the mount struct caused by this. We then start converting all places aware of idmapped mounts to rely on struct mnt_idmap. Once the conversion is done all helpers down to the really low-level make_vfs{g,u}id() and from_vfs{g,u}id() will take a struct mnt_idmap argument instead of two namespace arguments. This way it becomes impossible to conflate the two, removing and thus eliminating the possibility of any bugs. Fwiw, I fixed some issues in that area a while ago in ntfs3 and ksmbd in the past. Afterwards, only low-level code can ultimately use the associated namespace for any permission checks. Even most of the vfs can be ultimately completely oblivious about this and filesystems will never interact with it directly in any form in the future. A struct mnt_idmap currently encompasses a simple refcount and a pointer to the relevant namespace the mount is idmapped to. If a mount isn't idmapped then it will point to a static nop_mnt_idmap. If it is an idmapped mount it will point to a new struct mnt_idmap. As usual there are no allocations or anything happening for non-idmapped mounts. Everthing is carefully written to be a nop for non-idmapped mounts as has always been the case. If an idmapped mount or mount tree is created a new struct mnt_idmap is allocated and a reference taken on the relevant namespace. For each mount in a mount tree that gets idmapped or a mount that inherits the idmap when it is cloned the reference count on the associated struct mnt_idmap is bumped. Just a reminder that we only allow a mount to change it's idmapping a single time and only if it hasn't already been attached to the filesystems and has no active writers. The actual changes are fairly straightforward. This will have huge benefits for maintenance and security in the long run even if it causes some churn. I'm aware that there's some cost for all of you. And I'll commit to doing this work and make this as painless as I can. Note that this also makes it possible to extend struct mount_idmap in the future. For example, it would be possible to place the namespace pointer in an anonymous union together with an idmapping struct. This would allow us to expose an api to userspace that would let it specify idmappings directly instead of having to go through the detour of setting up namespaces at all. This just adds the infrastructure and doesn't do any conversions. Reviewed-by: Seth Forshee (DigitalOcean) <sforshee@kernel.org> Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
2022-10-26 10:51:27 +00:00
if (!kattr->mnt_idmap)
fs: introduce MOUNT_ATTR_IDMAP Introduce a new mount bind mount property to allow idmapping mounts. The MOUNT_ATTR_IDMAP flag can be set via the new mount_setattr() syscall together with a file descriptor referring to a user namespace. The user namespace referenced by the namespace file descriptor will be attached to the bind mount. All interactions with the filesystem going through that mount will be mapped according to the mapping specified in the user namespace attached to it. Using user namespaces to mark mounts means we can reuse all the existing infrastructure in the kernel that already exists to handle idmappings and can also use this for permission checking to allow unprivileged user to create idmapped mounts in the future. Idmapping a mount is decoupled from the caller's user and mount namespace. This means idmapped mounts can be created in the initial user namespace which is an important use-case for systemd-homed, portable usb-sticks between systems, sharing data between the initial user namespace and unprivileged containers, and other use-cases that have been brought up. For example, assume a home directory where all files are owned by uid and gid 1000 and the home directory is brought to a new laptop where the user has id 12345. The system administrator can simply create a mount of this home directory with a mapping of 1000:12345:1 and other mappings to indicate the ids should be kept. (With this it is e.g. also possible to create idmapped mounts on the host with an identity mapping 1:1:100000 where the root user is not mapped. A user with root access that e.g. has been pivot rooted into such a mount on the host will be not be able to execute, read, write, or create files as root.) Given that mapping a mount is decoupled from the caller's user namespace a sufficiently privileged process such as a container manager can set up an idmapped mount for the container and the container can simply pivot root to it. There's no need for the container to do anything. The mount will appear correctly mapped independent of the user namespace the container uses. This means we don't need to mark a mount as idmappable. In order to create an idmapped mount the caller must currently be privileged in the user namespace of the superblock the mount belongs to. Once a mount has been idmapped we don't allow it to change its mapping. This keeps permission checking and life-cycle management simple. Users wanting to change the idmapped can always create a new detached mount with a different idmapping. Link: https://lore.kernel.org/r/20210121131959.646623-36-christian.brauner@ubuntu.com Cc: Christoph Hellwig <hch@lst.de> Cc: David Howells <dhowells@redhat.com> Cc: Mauricio Vásquez Bernal <mauricio@kinvolk.io> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: linux-fsdevel@vger.kernel.org Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
2021-01-21 13:19:54 +00:00
return;
fs: support mapped mounts of mapped filesystems In previous patches we added new and modified existing helpers to handle idmapped mounts of filesystems mounted with an idmapping. In this final patch we convert all relevant places in the vfs to actually pass the filesystem's idmapping into these helpers. With this the vfs is in shape to handle idmapped mounts of filesystems mounted with an idmapping. Note that this is just the generic infrastructure. Actually adding support for idmapped mounts to a filesystem mountable with an idmapping is follow-up work. In this patch we extend the definition of an idmapped mount from a mount that that has the initial idmapping attached to it to a mount that has an idmapping attached to it which is not the same as the idmapping the filesystem was mounted with. As before we do not allow the initial idmapping to be attached to a mount. In addition this patch prevents that the idmapping the filesystem was mounted with can be attached to a mount created based on this filesystem. This has multiple reasons and advantages. First, attaching the initial idmapping or the filesystem's idmapping doesn't make much sense as in both cases the values of the i_{g,u}id and other places where k{g,u}ids are used do not change. Second, a user that really wants to do this for whatever reason can just create a separate dedicated identical idmapping to attach to the mount. Third, we can continue to use the initial idmapping as an indicator that a mount is not idmapped allowing us to continue to keep passing the initial idmapping into the mapping helpers to tell them that something isn't an idmapped mount even if the filesystem is mounted with an idmapping. Link: https://lore.kernel.org/r/20211123114227.3124056-11-brauner@kernel.org (v1) Link: https://lore.kernel.org/r/20211130121032.3753852-11-brauner@kernel.org (v2) Link: https://lore.kernel.org/r/20211203111707.3901969-11-brauner@kernel.org Cc: Seth Forshee <sforshee@digitalocean.com> Cc: Amir Goldstein <amir73il@gmail.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Al Viro <viro@zeniv.linux.org.uk> CC: linux-fsdevel@vger.kernel.org Reviewed-by: Seth Forshee <sforshee@digitalocean.com> Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
2021-12-03 11:17:07 +00:00
/*
fs: introduce dedicated idmap type for mounts Last cycle we've already made the interaction with idmapped mounts more robust and type safe by introducing the vfs{g,u}id_t type. This cycle we concluded the conversion and removed the legacy helpers. Currently we still pass around the plain namespace that was attached to a mount. This is in general pretty convenient but it makes it easy to conflate filesystem and mount namespaces and what different roles they have to play. Especially for filesystem developers without much experience in this area this is an easy source for bugs. Instead of passing the plain namespace we introduce a dedicated type struct mnt_idmap and replace the pointer with a pointer to a struct mnt_idmap. There are no semantic or size changes for the mount struct caused by this. We then start converting all places aware of idmapped mounts to rely on struct mnt_idmap. Once the conversion is done all helpers down to the really low-level make_vfs{g,u}id() and from_vfs{g,u}id() will take a struct mnt_idmap argument instead of two namespace arguments. This way it becomes impossible to conflate the two, removing and thus eliminating the possibility of any bugs. Fwiw, I fixed some issues in that area a while ago in ntfs3 and ksmbd in the past. Afterwards, only low-level code can ultimately use the associated namespace for any permission checks. Even most of the vfs can be ultimately completely oblivious about this and filesystems will never interact with it directly in any form in the future. A struct mnt_idmap currently encompasses a simple refcount and a pointer to the relevant namespace the mount is idmapped to. If a mount isn't idmapped then it will point to a static nop_mnt_idmap. If it is an idmapped mount it will point to a new struct mnt_idmap. As usual there are no allocations or anything happening for non-idmapped mounts. Everthing is carefully written to be a nop for non-idmapped mounts as has always been the case. If an idmapped mount or mount tree is created a new struct mnt_idmap is allocated and a reference taken on the relevant namespace. For each mount in a mount tree that gets idmapped or a mount that inherits the idmap when it is cloned the reference count on the associated struct mnt_idmap is bumped. Just a reminder that we only allow a mount to change it's idmapping a single time and only if it hasn't already been attached to the filesystems and has no active writers. The actual changes are fairly straightforward. This will have huge benefits for maintenance and security in the long run even if it causes some churn. I'm aware that there's some cost for all of you. And I'll commit to doing this work and make this as painless as I can. Note that this also makes it possible to extend struct mount_idmap in the future. For example, it would be possible to place the namespace pointer in an anonymous union together with an idmapping struct. This would allow us to expose an api to userspace that would let it specify idmappings directly instead of having to go through the detour of setting up namespaces at all. This just adds the infrastructure and doesn't do any conversions. Reviewed-by: Seth Forshee (DigitalOcean) <sforshee@kernel.org> Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
2022-10-26 10:51:27 +00:00
* Pairs with smp_load_acquire() in mnt_idmap().
*
* Since we only allow a mount to change the idmapping once and
* verified this in can_idmap_mount() we know that the mount has
* @nop_mnt_idmap attached to it. So there's no need to drop any
* references.
fs: support mapped mounts of mapped filesystems In previous patches we added new and modified existing helpers to handle idmapped mounts of filesystems mounted with an idmapping. In this final patch we convert all relevant places in the vfs to actually pass the filesystem's idmapping into these helpers. With this the vfs is in shape to handle idmapped mounts of filesystems mounted with an idmapping. Note that this is just the generic infrastructure. Actually adding support for idmapped mounts to a filesystem mountable with an idmapping is follow-up work. In this patch we extend the definition of an idmapped mount from a mount that that has the initial idmapping attached to it to a mount that has an idmapping attached to it which is not the same as the idmapping the filesystem was mounted with. As before we do not allow the initial idmapping to be attached to a mount. In addition this patch prevents that the idmapping the filesystem was mounted with can be attached to a mount created based on this filesystem. This has multiple reasons and advantages. First, attaching the initial idmapping or the filesystem's idmapping doesn't make much sense as in both cases the values of the i_{g,u}id and other places where k{g,u}ids are used do not change. Second, a user that really wants to do this for whatever reason can just create a separate dedicated identical idmapping to attach to the mount. Third, we can continue to use the initial idmapping as an indicator that a mount is not idmapped allowing us to continue to keep passing the initial idmapping into the mapping helpers to tell them that something isn't an idmapped mount even if the filesystem is mounted with an idmapping. Link: https://lore.kernel.org/r/20211123114227.3124056-11-brauner@kernel.org (v1) Link: https://lore.kernel.org/r/20211130121032.3753852-11-brauner@kernel.org (v2) Link: https://lore.kernel.org/r/20211203111707.3901969-11-brauner@kernel.org Cc: Seth Forshee <sforshee@digitalocean.com> Cc: Amir Goldstein <amir73il@gmail.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Al Viro <viro@zeniv.linux.org.uk> CC: linux-fsdevel@vger.kernel.org Reviewed-by: Seth Forshee <sforshee@digitalocean.com> Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
2021-12-03 11:17:07 +00:00
*/
fs: introduce dedicated idmap type for mounts Last cycle we've already made the interaction with idmapped mounts more robust and type safe by introducing the vfs{g,u}id_t type. This cycle we concluded the conversion and removed the legacy helpers. Currently we still pass around the plain namespace that was attached to a mount. This is in general pretty convenient but it makes it easy to conflate filesystem and mount namespaces and what different roles they have to play. Especially for filesystem developers without much experience in this area this is an easy source for bugs. Instead of passing the plain namespace we introduce a dedicated type struct mnt_idmap and replace the pointer with a pointer to a struct mnt_idmap. There are no semantic or size changes for the mount struct caused by this. We then start converting all places aware of idmapped mounts to rely on struct mnt_idmap. Once the conversion is done all helpers down to the really low-level make_vfs{g,u}id() and from_vfs{g,u}id() will take a struct mnt_idmap argument instead of two namespace arguments. This way it becomes impossible to conflate the two, removing and thus eliminating the possibility of any bugs. Fwiw, I fixed some issues in that area a while ago in ntfs3 and ksmbd in the past. Afterwards, only low-level code can ultimately use the associated namespace for any permission checks. Even most of the vfs can be ultimately completely oblivious about this and filesystems will never interact with it directly in any form in the future. A struct mnt_idmap currently encompasses a simple refcount and a pointer to the relevant namespace the mount is idmapped to. If a mount isn't idmapped then it will point to a static nop_mnt_idmap. If it is an idmapped mount it will point to a new struct mnt_idmap. As usual there are no allocations or anything happening for non-idmapped mounts. Everthing is carefully written to be a nop for non-idmapped mounts as has always been the case. If an idmapped mount or mount tree is created a new struct mnt_idmap is allocated and a reference taken on the relevant namespace. For each mount in a mount tree that gets idmapped or a mount that inherits the idmap when it is cloned the reference count on the associated struct mnt_idmap is bumped. Just a reminder that we only allow a mount to change it's idmapping a single time and only if it hasn't already been attached to the filesystems and has no active writers. The actual changes are fairly straightforward. This will have huge benefits for maintenance and security in the long run even if it causes some churn. I'm aware that there's some cost for all of you. And I'll commit to doing this work and make this as painless as I can. Note that this also makes it possible to extend struct mount_idmap in the future. For example, it would be possible to place the namespace pointer in an anonymous union together with an idmapping struct. This would allow us to expose an api to userspace that would let it specify idmappings directly instead of having to go through the detour of setting up namespaces at all. This just adds the infrastructure and doesn't do any conversions. Reviewed-by: Seth Forshee (DigitalOcean) <sforshee@kernel.org> Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
2022-10-26 10:51:27 +00:00
smp_store_release(&mnt->mnt.mnt_idmap, mnt_idmap_get(kattr->mnt_idmap));
fs: introduce MOUNT_ATTR_IDMAP Introduce a new mount bind mount property to allow idmapping mounts. The MOUNT_ATTR_IDMAP flag can be set via the new mount_setattr() syscall together with a file descriptor referring to a user namespace. The user namespace referenced by the namespace file descriptor will be attached to the bind mount. All interactions with the filesystem going through that mount will be mapped according to the mapping specified in the user namespace attached to it. Using user namespaces to mark mounts means we can reuse all the existing infrastructure in the kernel that already exists to handle idmappings and can also use this for permission checking to allow unprivileged user to create idmapped mounts in the future. Idmapping a mount is decoupled from the caller's user and mount namespace. This means idmapped mounts can be created in the initial user namespace which is an important use-case for systemd-homed, portable usb-sticks between systems, sharing data between the initial user namespace and unprivileged containers, and other use-cases that have been brought up. For example, assume a home directory where all files are owned by uid and gid 1000 and the home directory is brought to a new laptop where the user has id 12345. The system administrator can simply create a mount of this home directory with a mapping of 1000:12345:1 and other mappings to indicate the ids should be kept. (With this it is e.g. also possible to create idmapped mounts on the host with an identity mapping 1:1:100000 where the root user is not mapped. A user with root access that e.g. has been pivot rooted into such a mount on the host will be not be able to execute, read, write, or create files as root.) Given that mapping a mount is decoupled from the caller's user namespace a sufficiently privileged process such as a container manager can set up an idmapped mount for the container and the container can simply pivot root to it. There's no need for the container to do anything. The mount will appear correctly mapped independent of the user namespace the container uses. This means we don't need to mark a mount as idmappable. In order to create an idmapped mount the caller must currently be privileged in the user namespace of the superblock the mount belongs to. Once a mount has been idmapped we don't allow it to change its mapping. This keeps permission checking and life-cycle management simple. Users wanting to change the idmapped can always create a new detached mount with a different idmapping. Link: https://lore.kernel.org/r/20210121131959.646623-36-christian.brauner@ubuntu.com Cc: Christoph Hellwig <hch@lst.de> Cc: David Howells <dhowells@redhat.com> Cc: Mauricio Vásquez Bernal <mauricio@kinvolk.io> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: linux-fsdevel@vger.kernel.org Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
2021-01-21 13:19:54 +00:00
}
static void mount_setattr_commit(struct mount_kattr *kattr, struct mount *mnt)
fs: add mount_setattr() This implements the missing mount_setattr() syscall. While the new mount api allows to change the properties of a superblock there is currently no way to change the properties of a mount or a mount tree using file descriptors which the new mount api is based on. In addition the old mount api has the restriction that mount options cannot be applied recursively. This hasn't changed since changing mount options on a per-mount basis was implemented in [1] and has been a frequent request not just for convenience but also for security reasons. The legacy mount syscall is unable to accommodate this behavior without introducing a whole new set of flags because MS_REC | MS_REMOUNT | MS_BIND | MS_RDONLY | MS_NOEXEC | [...] only apply the mount option to the topmost mount. Changing MS_REC to apply to the whole mount tree would mean introducing a significant uapi change and would likely cause significant regressions. The new mount_setattr() syscall allows to recursively clear and set mount options in one shot. Multiple calls to change mount options requesting the same changes are idempotent: int mount_setattr(int dfd, const char *path, unsigned flags, struct mount_attr *uattr, size_t usize); Flags to modify path resolution behavior are specified in the @flags argument. Currently, AT_EMPTY_PATH, AT_RECURSIVE, AT_SYMLINK_NOFOLLOW, and AT_NO_AUTOMOUNT are supported. If useful, additional lookup flags to restrict path resolution as introduced with openat2() might be supported in the future. The mount_setattr() syscall can be expected to grow over time and is designed with extensibility in mind. It follows the extensible syscall pattern we have used with other syscalls such as openat2(), clone3(), sched_{set,get}attr(), and others. The set of mount options is passed in the uapi struct mount_attr which currently has the following layout: struct mount_attr { __u64 attr_set; __u64 attr_clr; __u64 propagation; __u64 userns_fd; }; The @attr_set and @attr_clr members are used to clear and set mount options. This way a user can e.g. request that a set of flags is to be raised such as turning mounts readonly by raising MOUNT_ATTR_RDONLY in @attr_set while at the same time requesting that another set of flags is to be lowered such as removing noexec from a mount tree by specifying MOUNT_ATTR_NOEXEC in @attr_clr. Note, since the MOUNT_ATTR_<atime> values are an enum starting from 0, not a bitmap, users wanting to transition to a different atime setting cannot simply specify the atime setting in @attr_set, but must also specify MOUNT_ATTR__ATIME in the @attr_clr field. So we ensure that MOUNT_ATTR__ATIME can't be partially set in @attr_clr and that @attr_set can't have any atime bits set if MOUNT_ATTR__ATIME isn't set in @attr_clr. The @propagation field lets callers specify the propagation type of a mount tree. Propagation is a single property that has four different settings and as such is not really a flag argument but an enum. Specifically, it would be unclear what setting and clearing propagation settings in combination would amount to. The legacy mount() syscall thus forbids the combination of multiple propagation settings too. The goal is to keep the semantics of mount propagation somewhat simple as they are overly complex as it is. The @userns_fd field lets user specify a user namespace whose idmapping becomes the idmapping of the mount. This is implemented and explained in detail in the next patch. [1]: commit 2e4b7fcd9260 ("[PATCH] r/o bind mounts: honor mount writer counts at remount") Link: https://lore.kernel.org/r/20210121131959.646623-35-christian.brauner@ubuntu.com Cc: David Howells <dhowells@redhat.com> Cc: Aleksa Sarai <cyphar@cyphar.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: linux-fsdevel@vger.kernel.org Cc: linux-api@vger.kernel.org Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
2021-01-21 13:19:53 +00:00
{
struct mount *m;
fs: add mount_setattr() This implements the missing mount_setattr() syscall. While the new mount api allows to change the properties of a superblock there is currently no way to change the properties of a mount or a mount tree using file descriptors which the new mount api is based on. In addition the old mount api has the restriction that mount options cannot be applied recursively. This hasn't changed since changing mount options on a per-mount basis was implemented in [1] and has been a frequent request not just for convenience but also for security reasons. The legacy mount syscall is unable to accommodate this behavior without introducing a whole new set of flags because MS_REC | MS_REMOUNT | MS_BIND | MS_RDONLY | MS_NOEXEC | [...] only apply the mount option to the topmost mount. Changing MS_REC to apply to the whole mount tree would mean introducing a significant uapi change and would likely cause significant regressions. The new mount_setattr() syscall allows to recursively clear and set mount options in one shot. Multiple calls to change mount options requesting the same changes are idempotent: int mount_setattr(int dfd, const char *path, unsigned flags, struct mount_attr *uattr, size_t usize); Flags to modify path resolution behavior are specified in the @flags argument. Currently, AT_EMPTY_PATH, AT_RECURSIVE, AT_SYMLINK_NOFOLLOW, and AT_NO_AUTOMOUNT are supported. If useful, additional lookup flags to restrict path resolution as introduced with openat2() might be supported in the future. The mount_setattr() syscall can be expected to grow over time and is designed with extensibility in mind. It follows the extensible syscall pattern we have used with other syscalls such as openat2(), clone3(), sched_{set,get}attr(), and others. The set of mount options is passed in the uapi struct mount_attr which currently has the following layout: struct mount_attr { __u64 attr_set; __u64 attr_clr; __u64 propagation; __u64 userns_fd; }; The @attr_set and @attr_clr members are used to clear and set mount options. This way a user can e.g. request that a set of flags is to be raised such as turning mounts readonly by raising MOUNT_ATTR_RDONLY in @attr_set while at the same time requesting that another set of flags is to be lowered such as removing noexec from a mount tree by specifying MOUNT_ATTR_NOEXEC in @attr_clr. Note, since the MOUNT_ATTR_<atime> values are an enum starting from 0, not a bitmap, users wanting to transition to a different atime setting cannot simply specify the atime setting in @attr_set, but must also specify MOUNT_ATTR__ATIME in the @attr_clr field. So we ensure that MOUNT_ATTR__ATIME can't be partially set in @attr_clr and that @attr_set can't have any atime bits set if MOUNT_ATTR__ATIME isn't set in @attr_clr. The @propagation field lets callers specify the propagation type of a mount tree. Propagation is a single property that has four different settings and as such is not really a flag argument but an enum. Specifically, it would be unclear what setting and clearing propagation settings in combination would amount to. The legacy mount() syscall thus forbids the combination of multiple propagation settings too. The goal is to keep the semantics of mount propagation somewhat simple as they are overly complex as it is. The @userns_fd field lets user specify a user namespace whose idmapping becomes the idmapping of the mount. This is implemented and explained in detail in the next patch. [1]: commit 2e4b7fcd9260 ("[PATCH] r/o bind mounts: honor mount writer counts at remount") Link: https://lore.kernel.org/r/20210121131959.646623-35-christian.brauner@ubuntu.com Cc: David Howells <dhowells@redhat.com> Cc: Aleksa Sarai <cyphar@cyphar.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: linux-fsdevel@vger.kernel.org Cc: linux-api@vger.kernel.org Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
2021-01-21 13:19:53 +00:00
for (m = mnt; m; m = next_mnt(m, mnt)) {
unsigned int flags;
fs: add mount_setattr() This implements the missing mount_setattr() syscall. While the new mount api allows to change the properties of a superblock there is currently no way to change the properties of a mount or a mount tree using file descriptors which the new mount api is based on. In addition the old mount api has the restriction that mount options cannot be applied recursively. This hasn't changed since changing mount options on a per-mount basis was implemented in [1] and has been a frequent request not just for convenience but also for security reasons. The legacy mount syscall is unable to accommodate this behavior without introducing a whole new set of flags because MS_REC | MS_REMOUNT | MS_BIND | MS_RDONLY | MS_NOEXEC | [...] only apply the mount option to the topmost mount. Changing MS_REC to apply to the whole mount tree would mean introducing a significant uapi change and would likely cause significant regressions. The new mount_setattr() syscall allows to recursively clear and set mount options in one shot. Multiple calls to change mount options requesting the same changes are idempotent: int mount_setattr(int dfd, const char *path, unsigned flags, struct mount_attr *uattr, size_t usize); Flags to modify path resolution behavior are specified in the @flags argument. Currently, AT_EMPTY_PATH, AT_RECURSIVE, AT_SYMLINK_NOFOLLOW, and AT_NO_AUTOMOUNT are supported. If useful, additional lookup flags to restrict path resolution as introduced with openat2() might be supported in the future. The mount_setattr() syscall can be expected to grow over time and is designed with extensibility in mind. It follows the extensible syscall pattern we have used with other syscalls such as openat2(), clone3(), sched_{set,get}attr(), and others. The set of mount options is passed in the uapi struct mount_attr which currently has the following layout: struct mount_attr { __u64 attr_set; __u64 attr_clr; __u64 propagation; __u64 userns_fd; }; The @attr_set and @attr_clr members are used to clear and set mount options. This way a user can e.g. request that a set of flags is to be raised such as turning mounts readonly by raising MOUNT_ATTR_RDONLY in @attr_set while at the same time requesting that another set of flags is to be lowered such as removing noexec from a mount tree by specifying MOUNT_ATTR_NOEXEC in @attr_clr. Note, since the MOUNT_ATTR_<atime> values are an enum starting from 0, not a bitmap, users wanting to transition to a different atime setting cannot simply specify the atime setting in @attr_set, but must also specify MOUNT_ATTR__ATIME in the @attr_clr field. So we ensure that MOUNT_ATTR__ATIME can't be partially set in @attr_clr and that @attr_set can't have any atime bits set if MOUNT_ATTR__ATIME isn't set in @attr_clr. The @propagation field lets callers specify the propagation type of a mount tree. Propagation is a single property that has four different settings and as such is not really a flag argument but an enum. Specifically, it would be unclear what setting and clearing propagation settings in combination would amount to. The legacy mount() syscall thus forbids the combination of multiple propagation settings too. The goal is to keep the semantics of mount propagation somewhat simple as they are overly complex as it is. The @userns_fd field lets user specify a user namespace whose idmapping becomes the idmapping of the mount. This is implemented and explained in detail in the next patch. [1]: commit 2e4b7fcd9260 ("[PATCH] r/o bind mounts: honor mount writer counts at remount") Link: https://lore.kernel.org/r/20210121131959.646623-35-christian.brauner@ubuntu.com Cc: David Howells <dhowells@redhat.com> Cc: Aleksa Sarai <cyphar@cyphar.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: linux-fsdevel@vger.kernel.org Cc: linux-api@vger.kernel.org Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
2021-01-21 13:19:53 +00:00
do_idmap_mount(kattr, m);
flags = recalc_flags(kattr, m);
WRITE_ONCE(m->mnt.mnt_flags, flags);
fs: add mount_setattr() This implements the missing mount_setattr() syscall. While the new mount api allows to change the properties of a superblock there is currently no way to change the properties of a mount or a mount tree using file descriptors which the new mount api is based on. In addition the old mount api has the restriction that mount options cannot be applied recursively. This hasn't changed since changing mount options on a per-mount basis was implemented in [1] and has been a frequent request not just for convenience but also for security reasons. The legacy mount syscall is unable to accommodate this behavior without introducing a whole new set of flags because MS_REC | MS_REMOUNT | MS_BIND | MS_RDONLY | MS_NOEXEC | [...] only apply the mount option to the topmost mount. Changing MS_REC to apply to the whole mount tree would mean introducing a significant uapi change and would likely cause significant regressions. The new mount_setattr() syscall allows to recursively clear and set mount options in one shot. Multiple calls to change mount options requesting the same changes are idempotent: int mount_setattr(int dfd, const char *path, unsigned flags, struct mount_attr *uattr, size_t usize); Flags to modify path resolution behavior are specified in the @flags argument. Currently, AT_EMPTY_PATH, AT_RECURSIVE, AT_SYMLINK_NOFOLLOW, and AT_NO_AUTOMOUNT are supported. If useful, additional lookup flags to restrict path resolution as introduced with openat2() might be supported in the future. The mount_setattr() syscall can be expected to grow over time and is designed with extensibility in mind. It follows the extensible syscall pattern we have used with other syscalls such as openat2(), clone3(), sched_{set,get}attr(), and others. The set of mount options is passed in the uapi struct mount_attr which currently has the following layout: struct mount_attr { __u64 attr_set; __u64 attr_clr; __u64 propagation; __u64 userns_fd; }; The @attr_set and @attr_clr members are used to clear and set mount options. This way a user can e.g. request that a set of flags is to be raised such as turning mounts readonly by raising MOUNT_ATTR_RDONLY in @attr_set while at the same time requesting that another set of flags is to be lowered such as removing noexec from a mount tree by specifying MOUNT_ATTR_NOEXEC in @attr_clr. Note, since the MOUNT_ATTR_<atime> values are an enum starting from 0, not a bitmap, users wanting to transition to a different atime setting cannot simply specify the atime setting in @attr_set, but must also specify MOUNT_ATTR__ATIME in the @attr_clr field. So we ensure that MOUNT_ATTR__ATIME can't be partially set in @attr_clr and that @attr_set can't have any atime bits set if MOUNT_ATTR__ATIME isn't set in @attr_clr. The @propagation field lets callers specify the propagation type of a mount tree. Propagation is a single property that has four different settings and as such is not really a flag argument but an enum. Specifically, it would be unclear what setting and clearing propagation settings in combination would amount to. The legacy mount() syscall thus forbids the combination of multiple propagation settings too. The goal is to keep the semantics of mount propagation somewhat simple as they are overly complex as it is. The @userns_fd field lets user specify a user namespace whose idmapping becomes the idmapping of the mount. This is implemented and explained in detail in the next patch. [1]: commit 2e4b7fcd9260 ("[PATCH] r/o bind mounts: honor mount writer counts at remount") Link: https://lore.kernel.org/r/20210121131959.646623-35-christian.brauner@ubuntu.com Cc: David Howells <dhowells@redhat.com> Cc: Aleksa Sarai <cyphar@cyphar.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: linux-fsdevel@vger.kernel.org Cc: linux-api@vger.kernel.org Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
2021-01-21 13:19:53 +00:00
/* If we had to hold writers unblock them. */
if (m->mnt.mnt_flags & MNT_WRITE_HOLD)
fs: add mount_setattr() This implements the missing mount_setattr() syscall. While the new mount api allows to change the properties of a superblock there is currently no way to change the properties of a mount or a mount tree using file descriptors which the new mount api is based on. In addition the old mount api has the restriction that mount options cannot be applied recursively. This hasn't changed since changing mount options on a per-mount basis was implemented in [1] and has been a frequent request not just for convenience but also for security reasons. The legacy mount syscall is unable to accommodate this behavior without introducing a whole new set of flags because MS_REC | MS_REMOUNT | MS_BIND | MS_RDONLY | MS_NOEXEC | [...] only apply the mount option to the topmost mount. Changing MS_REC to apply to the whole mount tree would mean introducing a significant uapi change and would likely cause significant regressions. The new mount_setattr() syscall allows to recursively clear and set mount options in one shot. Multiple calls to change mount options requesting the same changes are idempotent: int mount_setattr(int dfd, const char *path, unsigned flags, struct mount_attr *uattr, size_t usize); Flags to modify path resolution behavior are specified in the @flags argument. Currently, AT_EMPTY_PATH, AT_RECURSIVE, AT_SYMLINK_NOFOLLOW, and AT_NO_AUTOMOUNT are supported. If useful, additional lookup flags to restrict path resolution as introduced with openat2() might be supported in the future. The mount_setattr() syscall can be expected to grow over time and is designed with extensibility in mind. It follows the extensible syscall pattern we have used with other syscalls such as openat2(), clone3(), sched_{set,get}attr(), and others. The set of mount options is passed in the uapi struct mount_attr which currently has the following layout: struct mount_attr { __u64 attr_set; __u64 attr_clr; __u64 propagation; __u64 userns_fd; }; The @attr_set and @attr_clr members are used to clear and set mount options. This way a user can e.g. request that a set of flags is to be raised such as turning mounts readonly by raising MOUNT_ATTR_RDONLY in @attr_set while at the same time requesting that another set of flags is to be lowered such as removing noexec from a mount tree by specifying MOUNT_ATTR_NOEXEC in @attr_clr. Note, since the MOUNT_ATTR_<atime> values are an enum starting from 0, not a bitmap, users wanting to transition to a different atime setting cannot simply specify the atime setting in @attr_set, but must also specify MOUNT_ATTR__ATIME in the @attr_clr field. So we ensure that MOUNT_ATTR__ATIME can't be partially set in @attr_clr and that @attr_set can't have any atime bits set if MOUNT_ATTR__ATIME isn't set in @attr_clr. The @propagation field lets callers specify the propagation type of a mount tree. Propagation is a single property that has four different settings and as such is not really a flag argument but an enum. Specifically, it would be unclear what setting and clearing propagation settings in combination would amount to. The legacy mount() syscall thus forbids the combination of multiple propagation settings too. The goal is to keep the semantics of mount propagation somewhat simple as they are overly complex as it is. The @userns_fd field lets user specify a user namespace whose idmapping becomes the idmapping of the mount. This is implemented and explained in detail in the next patch. [1]: commit 2e4b7fcd9260 ("[PATCH] r/o bind mounts: honor mount writer counts at remount") Link: https://lore.kernel.org/r/20210121131959.646623-35-christian.brauner@ubuntu.com Cc: David Howells <dhowells@redhat.com> Cc: Aleksa Sarai <cyphar@cyphar.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: linux-fsdevel@vger.kernel.org Cc: linux-api@vger.kernel.org Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
2021-01-21 13:19:53 +00:00
mnt_unhold_writers(m);
if (kattr->propagation)
fs: add mount_setattr() This implements the missing mount_setattr() syscall. While the new mount api allows to change the properties of a superblock there is currently no way to change the properties of a mount or a mount tree using file descriptors which the new mount api is based on. In addition the old mount api has the restriction that mount options cannot be applied recursively. This hasn't changed since changing mount options on a per-mount basis was implemented in [1] and has been a frequent request not just for convenience but also for security reasons. The legacy mount syscall is unable to accommodate this behavior without introducing a whole new set of flags because MS_REC | MS_REMOUNT | MS_BIND | MS_RDONLY | MS_NOEXEC | [...] only apply the mount option to the topmost mount. Changing MS_REC to apply to the whole mount tree would mean introducing a significant uapi change and would likely cause significant regressions. The new mount_setattr() syscall allows to recursively clear and set mount options in one shot. Multiple calls to change mount options requesting the same changes are idempotent: int mount_setattr(int dfd, const char *path, unsigned flags, struct mount_attr *uattr, size_t usize); Flags to modify path resolution behavior are specified in the @flags argument. Currently, AT_EMPTY_PATH, AT_RECURSIVE, AT_SYMLINK_NOFOLLOW, and AT_NO_AUTOMOUNT are supported. If useful, additional lookup flags to restrict path resolution as introduced with openat2() might be supported in the future. The mount_setattr() syscall can be expected to grow over time and is designed with extensibility in mind. It follows the extensible syscall pattern we have used with other syscalls such as openat2(), clone3(), sched_{set,get}attr(), and others. The set of mount options is passed in the uapi struct mount_attr which currently has the following layout: struct mount_attr { __u64 attr_set; __u64 attr_clr; __u64 propagation; __u64 userns_fd; }; The @attr_set and @attr_clr members are used to clear and set mount options. This way a user can e.g. request that a set of flags is to be raised such as turning mounts readonly by raising MOUNT_ATTR_RDONLY in @attr_set while at the same time requesting that another set of flags is to be lowered such as removing noexec from a mount tree by specifying MOUNT_ATTR_NOEXEC in @attr_clr. Note, since the MOUNT_ATTR_<atime> values are an enum starting from 0, not a bitmap, users wanting to transition to a different atime setting cannot simply specify the atime setting in @attr_set, but must also specify MOUNT_ATTR__ATIME in the @attr_clr field. So we ensure that MOUNT_ATTR__ATIME can't be partially set in @attr_clr and that @attr_set can't have any atime bits set if MOUNT_ATTR__ATIME isn't set in @attr_clr. The @propagation field lets callers specify the propagation type of a mount tree. Propagation is a single property that has four different settings and as such is not really a flag argument but an enum. Specifically, it would be unclear what setting and clearing propagation settings in combination would amount to. The legacy mount() syscall thus forbids the combination of multiple propagation settings too. The goal is to keep the semantics of mount propagation somewhat simple as they are overly complex as it is. The @userns_fd field lets user specify a user namespace whose idmapping becomes the idmapping of the mount. This is implemented and explained in detail in the next patch. [1]: commit 2e4b7fcd9260 ("[PATCH] r/o bind mounts: honor mount writer counts at remount") Link: https://lore.kernel.org/r/20210121131959.646623-35-christian.brauner@ubuntu.com Cc: David Howells <dhowells@redhat.com> Cc: Aleksa Sarai <cyphar@cyphar.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: linux-fsdevel@vger.kernel.org Cc: linux-api@vger.kernel.org Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
2021-01-21 13:19:53 +00:00
change_mnt_propagation(m, kattr->propagation);
if (!kattr->recurse)
fs: add mount_setattr() This implements the missing mount_setattr() syscall. While the new mount api allows to change the properties of a superblock there is currently no way to change the properties of a mount or a mount tree using file descriptors which the new mount api is based on. In addition the old mount api has the restriction that mount options cannot be applied recursively. This hasn't changed since changing mount options on a per-mount basis was implemented in [1] and has been a frequent request not just for convenience but also for security reasons. The legacy mount syscall is unable to accommodate this behavior without introducing a whole new set of flags because MS_REC | MS_REMOUNT | MS_BIND | MS_RDONLY | MS_NOEXEC | [...] only apply the mount option to the topmost mount. Changing MS_REC to apply to the whole mount tree would mean introducing a significant uapi change and would likely cause significant regressions. The new mount_setattr() syscall allows to recursively clear and set mount options in one shot. Multiple calls to change mount options requesting the same changes are idempotent: int mount_setattr(int dfd, const char *path, unsigned flags, struct mount_attr *uattr, size_t usize); Flags to modify path resolution behavior are specified in the @flags argument. Currently, AT_EMPTY_PATH, AT_RECURSIVE, AT_SYMLINK_NOFOLLOW, and AT_NO_AUTOMOUNT are supported. If useful, additional lookup flags to restrict path resolution as introduced with openat2() might be supported in the future. The mount_setattr() syscall can be expected to grow over time and is designed with extensibility in mind. It follows the extensible syscall pattern we have used with other syscalls such as openat2(), clone3(), sched_{set,get}attr(), and others. The set of mount options is passed in the uapi struct mount_attr which currently has the following layout: struct mount_attr { __u64 attr_set; __u64 attr_clr; __u64 propagation; __u64 userns_fd; }; The @attr_set and @attr_clr members are used to clear and set mount options. This way a user can e.g. request that a set of flags is to be raised such as turning mounts readonly by raising MOUNT_ATTR_RDONLY in @attr_set while at the same time requesting that another set of flags is to be lowered such as removing noexec from a mount tree by specifying MOUNT_ATTR_NOEXEC in @attr_clr. Note, since the MOUNT_ATTR_<atime> values are an enum starting from 0, not a bitmap, users wanting to transition to a different atime setting cannot simply specify the atime setting in @attr_set, but must also specify MOUNT_ATTR__ATIME in the @attr_clr field. So we ensure that MOUNT_ATTR__ATIME can't be partially set in @attr_clr and that @attr_set can't have any atime bits set if MOUNT_ATTR__ATIME isn't set in @attr_clr. The @propagation field lets callers specify the propagation type of a mount tree. Propagation is a single property that has four different settings and as such is not really a flag argument but an enum. Specifically, it would be unclear what setting and clearing propagation settings in combination would amount to. The legacy mount() syscall thus forbids the combination of multiple propagation settings too. The goal is to keep the semantics of mount propagation somewhat simple as they are overly complex as it is. The @userns_fd field lets user specify a user namespace whose idmapping becomes the idmapping of the mount. This is implemented and explained in detail in the next patch. [1]: commit 2e4b7fcd9260 ("[PATCH] r/o bind mounts: honor mount writer counts at remount") Link: https://lore.kernel.org/r/20210121131959.646623-35-christian.brauner@ubuntu.com Cc: David Howells <dhowells@redhat.com> Cc: Aleksa Sarai <cyphar@cyphar.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: linux-fsdevel@vger.kernel.org Cc: linux-api@vger.kernel.org Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
2021-01-21 13:19:53 +00:00
break;
}
touch_mnt_namespace(mnt->mnt_ns);
fs: add mount_setattr() This implements the missing mount_setattr() syscall. While the new mount api allows to change the properties of a superblock there is currently no way to change the properties of a mount or a mount tree using file descriptors which the new mount api is based on. In addition the old mount api has the restriction that mount options cannot be applied recursively. This hasn't changed since changing mount options on a per-mount basis was implemented in [1] and has been a frequent request not just for convenience but also for security reasons. The legacy mount syscall is unable to accommodate this behavior without introducing a whole new set of flags because MS_REC | MS_REMOUNT | MS_BIND | MS_RDONLY | MS_NOEXEC | [...] only apply the mount option to the topmost mount. Changing MS_REC to apply to the whole mount tree would mean introducing a significant uapi change and would likely cause significant regressions. The new mount_setattr() syscall allows to recursively clear and set mount options in one shot. Multiple calls to change mount options requesting the same changes are idempotent: int mount_setattr(int dfd, const char *path, unsigned flags, struct mount_attr *uattr, size_t usize); Flags to modify path resolution behavior are specified in the @flags argument. Currently, AT_EMPTY_PATH, AT_RECURSIVE, AT_SYMLINK_NOFOLLOW, and AT_NO_AUTOMOUNT are supported. If useful, additional lookup flags to restrict path resolution as introduced with openat2() might be supported in the future. The mount_setattr() syscall can be expected to grow over time and is designed with extensibility in mind. It follows the extensible syscall pattern we have used with other syscalls such as openat2(), clone3(), sched_{set,get}attr(), and others. The set of mount options is passed in the uapi struct mount_attr which currently has the following layout: struct mount_attr { __u64 attr_set; __u64 attr_clr; __u64 propagation; __u64 userns_fd; }; The @attr_set and @attr_clr members are used to clear and set mount options. This way a user can e.g. request that a set of flags is to be raised such as turning mounts readonly by raising MOUNT_ATTR_RDONLY in @attr_set while at the same time requesting that another set of flags is to be lowered such as removing noexec from a mount tree by specifying MOUNT_ATTR_NOEXEC in @attr_clr. Note, since the MOUNT_ATTR_<atime> values are an enum starting from 0, not a bitmap, users wanting to transition to a different atime setting cannot simply specify the atime setting in @attr_set, but must also specify MOUNT_ATTR__ATIME in the @attr_clr field. So we ensure that MOUNT_ATTR__ATIME can't be partially set in @attr_clr and that @attr_set can't have any atime bits set if MOUNT_ATTR__ATIME isn't set in @attr_clr. The @propagation field lets callers specify the propagation type of a mount tree. Propagation is a single property that has four different settings and as such is not really a flag argument but an enum. Specifically, it would be unclear what setting and clearing propagation settings in combination would amount to. The legacy mount() syscall thus forbids the combination of multiple propagation settings too. The goal is to keep the semantics of mount propagation somewhat simple as they are overly complex as it is. The @userns_fd field lets user specify a user namespace whose idmapping becomes the idmapping of the mount. This is implemented and explained in detail in the next patch. [1]: commit 2e4b7fcd9260 ("[PATCH] r/o bind mounts: honor mount writer counts at remount") Link: https://lore.kernel.org/r/20210121131959.646623-35-christian.brauner@ubuntu.com Cc: David Howells <dhowells@redhat.com> Cc: Aleksa Sarai <cyphar@cyphar.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: linux-fsdevel@vger.kernel.org Cc: linux-api@vger.kernel.org Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
2021-01-21 13:19:53 +00:00
}
static int do_mount_setattr(struct path *path, struct mount_kattr *kattr)
{
struct mount *mnt = real_mount(path->mnt);
fs: add mount_setattr() This implements the missing mount_setattr() syscall. While the new mount api allows to change the properties of a superblock there is currently no way to change the properties of a mount or a mount tree using file descriptors which the new mount api is based on. In addition the old mount api has the restriction that mount options cannot be applied recursively. This hasn't changed since changing mount options on a per-mount basis was implemented in [1] and has been a frequent request not just for convenience but also for security reasons. The legacy mount syscall is unable to accommodate this behavior without introducing a whole new set of flags because MS_REC | MS_REMOUNT | MS_BIND | MS_RDONLY | MS_NOEXEC | [...] only apply the mount option to the topmost mount. Changing MS_REC to apply to the whole mount tree would mean introducing a significant uapi change and would likely cause significant regressions. The new mount_setattr() syscall allows to recursively clear and set mount options in one shot. Multiple calls to change mount options requesting the same changes are idempotent: int mount_setattr(int dfd, const char *path, unsigned flags, struct mount_attr *uattr, size_t usize); Flags to modify path resolution behavior are specified in the @flags argument. Currently, AT_EMPTY_PATH, AT_RECURSIVE, AT_SYMLINK_NOFOLLOW, and AT_NO_AUTOMOUNT are supported. If useful, additional lookup flags to restrict path resolution as introduced with openat2() might be supported in the future. The mount_setattr() syscall can be expected to grow over time and is designed with extensibility in mind. It follows the extensible syscall pattern we have used with other syscalls such as openat2(), clone3(), sched_{set,get}attr(), and others. The set of mount options is passed in the uapi struct mount_attr which currently has the following layout: struct mount_attr { __u64 attr_set; __u64 attr_clr; __u64 propagation; __u64 userns_fd; }; The @attr_set and @attr_clr members are used to clear and set mount options. This way a user can e.g. request that a set of flags is to be raised such as turning mounts readonly by raising MOUNT_ATTR_RDONLY in @attr_set while at the same time requesting that another set of flags is to be lowered such as removing noexec from a mount tree by specifying MOUNT_ATTR_NOEXEC in @attr_clr. Note, since the MOUNT_ATTR_<atime> values are an enum starting from 0, not a bitmap, users wanting to transition to a different atime setting cannot simply specify the atime setting in @attr_set, but must also specify MOUNT_ATTR__ATIME in the @attr_clr field. So we ensure that MOUNT_ATTR__ATIME can't be partially set in @attr_clr and that @attr_set can't have any atime bits set if MOUNT_ATTR__ATIME isn't set in @attr_clr. The @propagation field lets callers specify the propagation type of a mount tree. Propagation is a single property that has four different settings and as such is not really a flag argument but an enum. Specifically, it would be unclear what setting and clearing propagation settings in combination would amount to. The legacy mount() syscall thus forbids the combination of multiple propagation settings too. The goal is to keep the semantics of mount propagation somewhat simple as they are overly complex as it is. The @userns_fd field lets user specify a user namespace whose idmapping becomes the idmapping of the mount. This is implemented and explained in detail in the next patch. [1]: commit 2e4b7fcd9260 ("[PATCH] r/o bind mounts: honor mount writer counts at remount") Link: https://lore.kernel.org/r/20210121131959.646623-35-christian.brauner@ubuntu.com Cc: David Howells <dhowells@redhat.com> Cc: Aleksa Sarai <cyphar@cyphar.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: linux-fsdevel@vger.kernel.org Cc: linux-api@vger.kernel.org Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
2021-01-21 13:19:53 +00:00
int err = 0;
if (!path_mounted(path))
fs: add mount_setattr() This implements the missing mount_setattr() syscall. While the new mount api allows to change the properties of a superblock there is currently no way to change the properties of a mount or a mount tree using file descriptors which the new mount api is based on. In addition the old mount api has the restriction that mount options cannot be applied recursively. This hasn't changed since changing mount options on a per-mount basis was implemented in [1] and has been a frequent request not just for convenience but also for security reasons. The legacy mount syscall is unable to accommodate this behavior without introducing a whole new set of flags because MS_REC | MS_REMOUNT | MS_BIND | MS_RDONLY | MS_NOEXEC | [...] only apply the mount option to the topmost mount. Changing MS_REC to apply to the whole mount tree would mean introducing a significant uapi change and would likely cause significant regressions. The new mount_setattr() syscall allows to recursively clear and set mount options in one shot. Multiple calls to change mount options requesting the same changes are idempotent: int mount_setattr(int dfd, const char *path, unsigned flags, struct mount_attr *uattr, size_t usize); Flags to modify path resolution behavior are specified in the @flags argument. Currently, AT_EMPTY_PATH, AT_RECURSIVE, AT_SYMLINK_NOFOLLOW, and AT_NO_AUTOMOUNT are supported. If useful, additional lookup flags to restrict path resolution as introduced with openat2() might be supported in the future. The mount_setattr() syscall can be expected to grow over time and is designed with extensibility in mind. It follows the extensible syscall pattern we have used with other syscalls such as openat2(), clone3(), sched_{set,get}attr(), and others. The set of mount options is passed in the uapi struct mount_attr which currently has the following layout: struct mount_attr { __u64 attr_set; __u64 attr_clr; __u64 propagation; __u64 userns_fd; }; The @attr_set and @attr_clr members are used to clear and set mount options. This way a user can e.g. request that a set of flags is to be raised such as turning mounts readonly by raising MOUNT_ATTR_RDONLY in @attr_set while at the same time requesting that another set of flags is to be lowered such as removing noexec from a mount tree by specifying MOUNT_ATTR_NOEXEC in @attr_clr. Note, since the MOUNT_ATTR_<atime> values are an enum starting from 0, not a bitmap, users wanting to transition to a different atime setting cannot simply specify the atime setting in @attr_set, but must also specify MOUNT_ATTR__ATIME in the @attr_clr field. So we ensure that MOUNT_ATTR__ATIME can't be partially set in @attr_clr and that @attr_set can't have any atime bits set if MOUNT_ATTR__ATIME isn't set in @attr_clr. The @propagation field lets callers specify the propagation type of a mount tree. Propagation is a single property that has four different settings and as such is not really a flag argument but an enum. Specifically, it would be unclear what setting and clearing propagation settings in combination would amount to. The legacy mount() syscall thus forbids the combination of multiple propagation settings too. The goal is to keep the semantics of mount propagation somewhat simple as they are overly complex as it is. The @userns_fd field lets user specify a user namespace whose idmapping becomes the idmapping of the mount. This is implemented and explained in detail in the next patch. [1]: commit 2e4b7fcd9260 ("[PATCH] r/o bind mounts: honor mount writer counts at remount") Link: https://lore.kernel.org/r/20210121131959.646623-35-christian.brauner@ubuntu.com Cc: David Howells <dhowells@redhat.com> Cc: Aleksa Sarai <cyphar@cyphar.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: linux-fsdevel@vger.kernel.org Cc: linux-api@vger.kernel.org Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
2021-01-21 13:19:53 +00:00
return -EINVAL;
fs: introduce dedicated idmap type for mounts Last cycle we've already made the interaction with idmapped mounts more robust and type safe by introducing the vfs{g,u}id_t type. This cycle we concluded the conversion and removed the legacy helpers. Currently we still pass around the plain namespace that was attached to a mount. This is in general pretty convenient but it makes it easy to conflate filesystem and mount namespaces and what different roles they have to play. Especially for filesystem developers without much experience in this area this is an easy source for bugs. Instead of passing the plain namespace we introduce a dedicated type struct mnt_idmap and replace the pointer with a pointer to a struct mnt_idmap. There are no semantic or size changes for the mount struct caused by this. We then start converting all places aware of idmapped mounts to rely on struct mnt_idmap. Once the conversion is done all helpers down to the really low-level make_vfs{g,u}id() and from_vfs{g,u}id() will take a struct mnt_idmap argument instead of two namespace arguments. This way it becomes impossible to conflate the two, removing and thus eliminating the possibility of any bugs. Fwiw, I fixed some issues in that area a while ago in ntfs3 and ksmbd in the past. Afterwards, only low-level code can ultimately use the associated namespace for any permission checks. Even most of the vfs can be ultimately completely oblivious about this and filesystems will never interact with it directly in any form in the future. A struct mnt_idmap currently encompasses a simple refcount and a pointer to the relevant namespace the mount is idmapped to. If a mount isn't idmapped then it will point to a static nop_mnt_idmap. If it is an idmapped mount it will point to a new struct mnt_idmap. As usual there are no allocations or anything happening for non-idmapped mounts. Everthing is carefully written to be a nop for non-idmapped mounts as has always been the case. If an idmapped mount or mount tree is created a new struct mnt_idmap is allocated and a reference taken on the relevant namespace. For each mount in a mount tree that gets idmapped or a mount that inherits the idmap when it is cloned the reference count on the associated struct mnt_idmap is bumped. Just a reminder that we only allow a mount to change it's idmapping a single time and only if it hasn't already been attached to the filesystems and has no active writers. The actual changes are fairly straightforward. This will have huge benefits for maintenance and security in the long run even if it causes some churn. I'm aware that there's some cost for all of you. And I'll commit to doing this work and make this as painless as I can. Note that this also makes it possible to extend struct mount_idmap in the future. For example, it would be possible to place the namespace pointer in an anonymous union together with an idmapping struct. This would allow us to expose an api to userspace that would let it specify idmappings directly instead of having to go through the detour of setting up namespaces at all. This just adds the infrastructure and doesn't do any conversions. Reviewed-by: Seth Forshee (DigitalOcean) <sforshee@kernel.org> Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
2022-10-26 10:51:27 +00:00
if (kattr->mnt_userns) {
struct mnt_idmap *mnt_idmap;
mnt_idmap = alloc_mnt_idmap(kattr->mnt_userns);
if (IS_ERR(mnt_idmap))
return PTR_ERR(mnt_idmap);
kattr->mnt_idmap = mnt_idmap;
}
fs: add mount_setattr() This implements the missing mount_setattr() syscall. While the new mount api allows to change the properties of a superblock there is currently no way to change the properties of a mount or a mount tree using file descriptors which the new mount api is based on. In addition the old mount api has the restriction that mount options cannot be applied recursively. This hasn't changed since changing mount options on a per-mount basis was implemented in [1] and has been a frequent request not just for convenience but also for security reasons. The legacy mount syscall is unable to accommodate this behavior without introducing a whole new set of flags because MS_REC | MS_REMOUNT | MS_BIND | MS_RDONLY | MS_NOEXEC | [...] only apply the mount option to the topmost mount. Changing MS_REC to apply to the whole mount tree would mean introducing a significant uapi change and would likely cause significant regressions. The new mount_setattr() syscall allows to recursively clear and set mount options in one shot. Multiple calls to change mount options requesting the same changes are idempotent: int mount_setattr(int dfd, const char *path, unsigned flags, struct mount_attr *uattr, size_t usize); Flags to modify path resolution behavior are specified in the @flags argument. Currently, AT_EMPTY_PATH, AT_RECURSIVE, AT_SYMLINK_NOFOLLOW, and AT_NO_AUTOMOUNT are supported. If useful, additional lookup flags to restrict path resolution as introduced with openat2() might be supported in the future. The mount_setattr() syscall can be expected to grow over time and is designed with extensibility in mind. It follows the extensible syscall pattern we have used with other syscalls such as openat2(), clone3(), sched_{set,get}attr(), and others. The set of mount options is passed in the uapi struct mount_attr which currently has the following layout: struct mount_attr { __u64 attr_set; __u64 attr_clr; __u64 propagation; __u64 userns_fd; }; The @attr_set and @attr_clr members are used to clear and set mount options. This way a user can e.g. request that a set of flags is to be raised such as turning mounts readonly by raising MOUNT_ATTR_RDONLY in @attr_set while at the same time requesting that another set of flags is to be lowered such as removing noexec from a mount tree by specifying MOUNT_ATTR_NOEXEC in @attr_clr. Note, since the MOUNT_ATTR_<atime> values are an enum starting from 0, not a bitmap, users wanting to transition to a different atime setting cannot simply specify the atime setting in @attr_set, but must also specify MOUNT_ATTR__ATIME in the @attr_clr field. So we ensure that MOUNT_ATTR__ATIME can't be partially set in @attr_clr and that @attr_set can't have any atime bits set if MOUNT_ATTR__ATIME isn't set in @attr_clr. The @propagation field lets callers specify the propagation type of a mount tree. Propagation is a single property that has four different settings and as such is not really a flag argument but an enum. Specifically, it would be unclear what setting and clearing propagation settings in combination would amount to. The legacy mount() syscall thus forbids the combination of multiple propagation settings too. The goal is to keep the semantics of mount propagation somewhat simple as they are overly complex as it is. The @userns_fd field lets user specify a user namespace whose idmapping becomes the idmapping of the mount. This is implemented and explained in detail in the next patch. [1]: commit 2e4b7fcd9260 ("[PATCH] r/o bind mounts: honor mount writer counts at remount") Link: https://lore.kernel.org/r/20210121131959.646623-35-christian.brauner@ubuntu.com Cc: David Howells <dhowells@redhat.com> Cc: Aleksa Sarai <cyphar@cyphar.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: linux-fsdevel@vger.kernel.org Cc: linux-api@vger.kernel.org Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
2021-01-21 13:19:53 +00:00
if (kattr->propagation) {
/*
* Only take namespace_lock() if we're actually changing
* propagation.
*/
namespace_lock();
if (kattr->propagation == MS_SHARED) {
err = invent_group_ids(mnt, kattr->recurse);
if (err) {
namespace_unlock();
return err;
}
}
}
err = -EINVAL;
fs: add mount_setattr() This implements the missing mount_setattr() syscall. While the new mount api allows to change the properties of a superblock there is currently no way to change the properties of a mount or a mount tree using file descriptors which the new mount api is based on. In addition the old mount api has the restriction that mount options cannot be applied recursively. This hasn't changed since changing mount options on a per-mount basis was implemented in [1] and has been a frequent request not just for convenience but also for security reasons. The legacy mount syscall is unable to accommodate this behavior without introducing a whole new set of flags because MS_REC | MS_REMOUNT | MS_BIND | MS_RDONLY | MS_NOEXEC | [...] only apply the mount option to the topmost mount. Changing MS_REC to apply to the whole mount tree would mean introducing a significant uapi change and would likely cause significant regressions. The new mount_setattr() syscall allows to recursively clear and set mount options in one shot. Multiple calls to change mount options requesting the same changes are idempotent: int mount_setattr(int dfd, const char *path, unsigned flags, struct mount_attr *uattr, size_t usize); Flags to modify path resolution behavior are specified in the @flags argument. Currently, AT_EMPTY_PATH, AT_RECURSIVE, AT_SYMLINK_NOFOLLOW, and AT_NO_AUTOMOUNT are supported. If useful, additional lookup flags to restrict path resolution as introduced with openat2() might be supported in the future. The mount_setattr() syscall can be expected to grow over time and is designed with extensibility in mind. It follows the extensible syscall pattern we have used with other syscalls such as openat2(), clone3(), sched_{set,get}attr(), and others. The set of mount options is passed in the uapi struct mount_attr which currently has the following layout: struct mount_attr { __u64 attr_set; __u64 attr_clr; __u64 propagation; __u64 userns_fd; }; The @attr_set and @attr_clr members are used to clear and set mount options. This way a user can e.g. request that a set of flags is to be raised such as turning mounts readonly by raising MOUNT_ATTR_RDONLY in @attr_set while at the same time requesting that another set of flags is to be lowered such as removing noexec from a mount tree by specifying MOUNT_ATTR_NOEXEC in @attr_clr. Note, since the MOUNT_ATTR_<atime> values are an enum starting from 0, not a bitmap, users wanting to transition to a different atime setting cannot simply specify the atime setting in @attr_set, but must also specify MOUNT_ATTR__ATIME in the @attr_clr field. So we ensure that MOUNT_ATTR__ATIME can't be partially set in @attr_clr and that @attr_set can't have any atime bits set if MOUNT_ATTR__ATIME isn't set in @attr_clr. The @propagation field lets callers specify the propagation type of a mount tree. Propagation is a single property that has four different settings and as such is not really a flag argument but an enum. Specifically, it would be unclear what setting and clearing propagation settings in combination would amount to. The legacy mount() syscall thus forbids the combination of multiple propagation settings too. The goal is to keep the semantics of mount propagation somewhat simple as they are overly complex as it is. The @userns_fd field lets user specify a user namespace whose idmapping becomes the idmapping of the mount. This is implemented and explained in detail in the next patch. [1]: commit 2e4b7fcd9260 ("[PATCH] r/o bind mounts: honor mount writer counts at remount") Link: https://lore.kernel.org/r/20210121131959.646623-35-christian.brauner@ubuntu.com Cc: David Howells <dhowells@redhat.com> Cc: Aleksa Sarai <cyphar@cyphar.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: linux-fsdevel@vger.kernel.org Cc: linux-api@vger.kernel.org Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
2021-01-21 13:19:53 +00:00
lock_mount_hash();
/* Ensure that this isn't anything purely vfs internal. */
if (!is_mounted(&mnt->mnt))
goto out;
fs: add mount_setattr() This implements the missing mount_setattr() syscall. While the new mount api allows to change the properties of a superblock there is currently no way to change the properties of a mount or a mount tree using file descriptors which the new mount api is based on. In addition the old mount api has the restriction that mount options cannot be applied recursively. This hasn't changed since changing mount options on a per-mount basis was implemented in [1] and has been a frequent request not just for convenience but also for security reasons. The legacy mount syscall is unable to accommodate this behavior without introducing a whole new set of flags because MS_REC | MS_REMOUNT | MS_BIND | MS_RDONLY | MS_NOEXEC | [...] only apply the mount option to the topmost mount. Changing MS_REC to apply to the whole mount tree would mean introducing a significant uapi change and would likely cause significant regressions. The new mount_setattr() syscall allows to recursively clear and set mount options in one shot. Multiple calls to change mount options requesting the same changes are idempotent: int mount_setattr(int dfd, const char *path, unsigned flags, struct mount_attr *uattr, size_t usize); Flags to modify path resolution behavior are specified in the @flags argument. Currently, AT_EMPTY_PATH, AT_RECURSIVE, AT_SYMLINK_NOFOLLOW, and AT_NO_AUTOMOUNT are supported. If useful, additional lookup flags to restrict path resolution as introduced with openat2() might be supported in the future. The mount_setattr() syscall can be expected to grow over time and is designed with extensibility in mind. It follows the extensible syscall pattern we have used with other syscalls such as openat2(), clone3(), sched_{set,get}attr(), and others. The set of mount options is passed in the uapi struct mount_attr which currently has the following layout: struct mount_attr { __u64 attr_set; __u64 attr_clr; __u64 propagation; __u64 userns_fd; }; The @attr_set and @attr_clr members are used to clear and set mount options. This way a user can e.g. request that a set of flags is to be raised such as turning mounts readonly by raising MOUNT_ATTR_RDONLY in @attr_set while at the same time requesting that another set of flags is to be lowered such as removing noexec from a mount tree by specifying MOUNT_ATTR_NOEXEC in @attr_clr. Note, since the MOUNT_ATTR_<atime> values are an enum starting from 0, not a bitmap, users wanting to transition to a different atime setting cannot simply specify the atime setting in @attr_set, but must also specify MOUNT_ATTR__ATIME in the @attr_clr field. So we ensure that MOUNT_ATTR__ATIME can't be partially set in @attr_clr and that @attr_set can't have any atime bits set if MOUNT_ATTR__ATIME isn't set in @attr_clr. The @propagation field lets callers specify the propagation type of a mount tree. Propagation is a single property that has four different settings and as such is not really a flag argument but an enum. Specifically, it would be unclear what setting and clearing propagation settings in combination would amount to. The legacy mount() syscall thus forbids the combination of multiple propagation settings too. The goal is to keep the semantics of mount propagation somewhat simple as they are overly complex as it is. The @userns_fd field lets user specify a user namespace whose idmapping becomes the idmapping of the mount. This is implemented and explained in detail in the next patch. [1]: commit 2e4b7fcd9260 ("[PATCH] r/o bind mounts: honor mount writer counts at remount") Link: https://lore.kernel.org/r/20210121131959.646623-35-christian.brauner@ubuntu.com Cc: David Howells <dhowells@redhat.com> Cc: Aleksa Sarai <cyphar@cyphar.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: linux-fsdevel@vger.kernel.org Cc: linux-api@vger.kernel.org Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
2021-01-21 13:19:53 +00:00
/*
* If this is an attached mount make sure it's located in the callers
* mount namespace. If it's not don't let the caller interact with it.
*
* If this mount doesn't have a parent it's most often simply a
* detached mount with an anonymous mount namespace. IOW, something
* that's simply not attached yet. But there are apparently also users
* that do change mount properties on the rootfs itself. That obviously
* neither has a parent nor is it a detached mount so we cannot
* unconditionally check for detached mounts.
fs: add mount_setattr() This implements the missing mount_setattr() syscall. While the new mount api allows to change the properties of a superblock there is currently no way to change the properties of a mount or a mount tree using file descriptors which the new mount api is based on. In addition the old mount api has the restriction that mount options cannot be applied recursively. This hasn't changed since changing mount options on a per-mount basis was implemented in [1] and has been a frequent request not just for convenience but also for security reasons. The legacy mount syscall is unable to accommodate this behavior without introducing a whole new set of flags because MS_REC | MS_REMOUNT | MS_BIND | MS_RDONLY | MS_NOEXEC | [...] only apply the mount option to the topmost mount. Changing MS_REC to apply to the whole mount tree would mean introducing a significant uapi change and would likely cause significant regressions. The new mount_setattr() syscall allows to recursively clear and set mount options in one shot. Multiple calls to change mount options requesting the same changes are idempotent: int mount_setattr(int dfd, const char *path, unsigned flags, struct mount_attr *uattr, size_t usize); Flags to modify path resolution behavior are specified in the @flags argument. Currently, AT_EMPTY_PATH, AT_RECURSIVE, AT_SYMLINK_NOFOLLOW, and AT_NO_AUTOMOUNT are supported. If useful, additional lookup flags to restrict path resolution as introduced with openat2() might be supported in the future. The mount_setattr() syscall can be expected to grow over time and is designed with extensibility in mind. It follows the extensible syscall pattern we have used with other syscalls such as openat2(), clone3(), sched_{set,get}attr(), and others. The set of mount options is passed in the uapi struct mount_attr which currently has the following layout: struct mount_attr { __u64 attr_set; __u64 attr_clr; __u64 propagation; __u64 userns_fd; }; The @attr_set and @attr_clr members are used to clear and set mount options. This way a user can e.g. request that a set of flags is to be raised such as turning mounts readonly by raising MOUNT_ATTR_RDONLY in @attr_set while at the same time requesting that another set of flags is to be lowered such as removing noexec from a mount tree by specifying MOUNT_ATTR_NOEXEC in @attr_clr. Note, since the MOUNT_ATTR_<atime> values are an enum starting from 0, not a bitmap, users wanting to transition to a different atime setting cannot simply specify the atime setting in @attr_set, but must also specify MOUNT_ATTR__ATIME in the @attr_clr field. So we ensure that MOUNT_ATTR__ATIME can't be partially set in @attr_clr and that @attr_set can't have any atime bits set if MOUNT_ATTR__ATIME isn't set in @attr_clr. The @propagation field lets callers specify the propagation type of a mount tree. Propagation is a single property that has four different settings and as such is not really a flag argument but an enum. Specifically, it would be unclear what setting and clearing propagation settings in combination would amount to. The legacy mount() syscall thus forbids the combination of multiple propagation settings too. The goal is to keep the semantics of mount propagation somewhat simple as they are overly complex as it is. The @userns_fd field lets user specify a user namespace whose idmapping becomes the idmapping of the mount. This is implemented and explained in detail in the next patch. [1]: commit 2e4b7fcd9260 ("[PATCH] r/o bind mounts: honor mount writer counts at remount") Link: https://lore.kernel.org/r/20210121131959.646623-35-christian.brauner@ubuntu.com Cc: David Howells <dhowells@redhat.com> Cc: Aleksa Sarai <cyphar@cyphar.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: linux-fsdevel@vger.kernel.org Cc: linux-api@vger.kernel.org Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
2021-01-21 13:19:53 +00:00
*/
if ((mnt_has_parent(mnt) || !is_anon_ns(mnt->mnt_ns)) && !check_mnt(mnt))
goto out;
fs: add mount_setattr() This implements the missing mount_setattr() syscall. While the new mount api allows to change the properties of a superblock there is currently no way to change the properties of a mount or a mount tree using file descriptors which the new mount api is based on. In addition the old mount api has the restriction that mount options cannot be applied recursively. This hasn't changed since changing mount options on a per-mount basis was implemented in [1] and has been a frequent request not just for convenience but also for security reasons. The legacy mount syscall is unable to accommodate this behavior without introducing a whole new set of flags because MS_REC | MS_REMOUNT | MS_BIND | MS_RDONLY | MS_NOEXEC | [...] only apply the mount option to the topmost mount. Changing MS_REC to apply to the whole mount tree would mean introducing a significant uapi change and would likely cause significant regressions. The new mount_setattr() syscall allows to recursively clear and set mount options in one shot. Multiple calls to change mount options requesting the same changes are idempotent: int mount_setattr(int dfd, const char *path, unsigned flags, struct mount_attr *uattr, size_t usize); Flags to modify path resolution behavior are specified in the @flags argument. Currently, AT_EMPTY_PATH, AT_RECURSIVE, AT_SYMLINK_NOFOLLOW, and AT_NO_AUTOMOUNT are supported. If useful, additional lookup flags to restrict path resolution as introduced with openat2() might be supported in the future. The mount_setattr() syscall can be expected to grow over time and is designed with extensibility in mind. It follows the extensible syscall pattern we have used with other syscalls such as openat2(), clone3(), sched_{set,get}attr(), and others. The set of mount options is passed in the uapi struct mount_attr which currently has the following layout: struct mount_attr { __u64 attr_set; __u64 attr_clr; __u64 propagation; __u64 userns_fd; }; The @attr_set and @attr_clr members are used to clear and set mount options. This way a user can e.g. request that a set of flags is to be raised such as turning mounts readonly by raising MOUNT_ATTR_RDONLY in @attr_set while at the same time requesting that another set of flags is to be lowered such as removing noexec from a mount tree by specifying MOUNT_ATTR_NOEXEC in @attr_clr. Note, since the MOUNT_ATTR_<atime> values are an enum starting from 0, not a bitmap, users wanting to transition to a different atime setting cannot simply specify the atime setting in @attr_set, but must also specify MOUNT_ATTR__ATIME in the @attr_clr field. So we ensure that MOUNT_ATTR__ATIME can't be partially set in @attr_clr and that @attr_set can't have any atime bits set if MOUNT_ATTR__ATIME isn't set in @attr_clr. The @propagation field lets callers specify the propagation type of a mount tree. Propagation is a single property that has four different settings and as such is not really a flag argument but an enum. Specifically, it would be unclear what setting and clearing propagation settings in combination would amount to. The legacy mount() syscall thus forbids the combination of multiple propagation settings too. The goal is to keep the semantics of mount propagation somewhat simple as they are overly complex as it is. The @userns_fd field lets user specify a user namespace whose idmapping becomes the idmapping of the mount. This is implemented and explained in detail in the next patch. [1]: commit 2e4b7fcd9260 ("[PATCH] r/o bind mounts: honor mount writer counts at remount") Link: https://lore.kernel.org/r/20210121131959.646623-35-christian.brauner@ubuntu.com Cc: David Howells <dhowells@redhat.com> Cc: Aleksa Sarai <cyphar@cyphar.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: linux-fsdevel@vger.kernel.org Cc: linux-api@vger.kernel.org Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
2021-01-21 13:19:53 +00:00
/*
* First, we get the mount tree in a shape where we can change mount
* properties without failure. If we succeeded to do so we commit all
* changes and if we failed we clean up.
*/
err = mount_setattr_prepare(kattr, mnt);
if (!err)
mount_setattr_commit(kattr, mnt);
fs: add mount_setattr() This implements the missing mount_setattr() syscall. While the new mount api allows to change the properties of a superblock there is currently no way to change the properties of a mount or a mount tree using file descriptors which the new mount api is based on. In addition the old mount api has the restriction that mount options cannot be applied recursively. This hasn't changed since changing mount options on a per-mount basis was implemented in [1] and has been a frequent request not just for convenience but also for security reasons. The legacy mount syscall is unable to accommodate this behavior without introducing a whole new set of flags because MS_REC | MS_REMOUNT | MS_BIND | MS_RDONLY | MS_NOEXEC | [...] only apply the mount option to the topmost mount. Changing MS_REC to apply to the whole mount tree would mean introducing a significant uapi change and would likely cause significant regressions. The new mount_setattr() syscall allows to recursively clear and set mount options in one shot. Multiple calls to change mount options requesting the same changes are idempotent: int mount_setattr(int dfd, const char *path, unsigned flags, struct mount_attr *uattr, size_t usize); Flags to modify path resolution behavior are specified in the @flags argument. Currently, AT_EMPTY_PATH, AT_RECURSIVE, AT_SYMLINK_NOFOLLOW, and AT_NO_AUTOMOUNT are supported. If useful, additional lookup flags to restrict path resolution as introduced with openat2() might be supported in the future. The mount_setattr() syscall can be expected to grow over time and is designed with extensibility in mind. It follows the extensible syscall pattern we have used with other syscalls such as openat2(), clone3(), sched_{set,get}attr(), and others. The set of mount options is passed in the uapi struct mount_attr which currently has the following layout: struct mount_attr { __u64 attr_set; __u64 attr_clr; __u64 propagation; __u64 userns_fd; }; The @attr_set and @attr_clr members are used to clear and set mount options. This way a user can e.g. request that a set of flags is to be raised such as turning mounts readonly by raising MOUNT_ATTR_RDONLY in @attr_set while at the same time requesting that another set of flags is to be lowered such as removing noexec from a mount tree by specifying MOUNT_ATTR_NOEXEC in @attr_clr. Note, since the MOUNT_ATTR_<atime> values are an enum starting from 0, not a bitmap, users wanting to transition to a different atime setting cannot simply specify the atime setting in @attr_set, but must also specify MOUNT_ATTR__ATIME in the @attr_clr field. So we ensure that MOUNT_ATTR__ATIME can't be partially set in @attr_clr and that @attr_set can't have any atime bits set if MOUNT_ATTR__ATIME isn't set in @attr_clr. The @propagation field lets callers specify the propagation type of a mount tree. Propagation is a single property that has four different settings and as such is not really a flag argument but an enum. Specifically, it would be unclear what setting and clearing propagation settings in combination would amount to. The legacy mount() syscall thus forbids the combination of multiple propagation settings too. The goal is to keep the semantics of mount propagation somewhat simple as they are overly complex as it is. The @userns_fd field lets user specify a user namespace whose idmapping becomes the idmapping of the mount. This is implemented and explained in detail in the next patch. [1]: commit 2e4b7fcd9260 ("[PATCH] r/o bind mounts: honor mount writer counts at remount") Link: https://lore.kernel.org/r/20210121131959.646623-35-christian.brauner@ubuntu.com Cc: David Howells <dhowells@redhat.com> Cc: Aleksa Sarai <cyphar@cyphar.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: linux-fsdevel@vger.kernel.org Cc: linux-api@vger.kernel.org Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
2021-01-21 13:19:53 +00:00
out:
fs: add mount_setattr() This implements the missing mount_setattr() syscall. While the new mount api allows to change the properties of a superblock there is currently no way to change the properties of a mount or a mount tree using file descriptors which the new mount api is based on. In addition the old mount api has the restriction that mount options cannot be applied recursively. This hasn't changed since changing mount options on a per-mount basis was implemented in [1] and has been a frequent request not just for convenience but also for security reasons. The legacy mount syscall is unable to accommodate this behavior without introducing a whole new set of flags because MS_REC | MS_REMOUNT | MS_BIND | MS_RDONLY | MS_NOEXEC | [...] only apply the mount option to the topmost mount. Changing MS_REC to apply to the whole mount tree would mean introducing a significant uapi change and would likely cause significant regressions. The new mount_setattr() syscall allows to recursively clear and set mount options in one shot. Multiple calls to change mount options requesting the same changes are idempotent: int mount_setattr(int dfd, const char *path, unsigned flags, struct mount_attr *uattr, size_t usize); Flags to modify path resolution behavior are specified in the @flags argument. Currently, AT_EMPTY_PATH, AT_RECURSIVE, AT_SYMLINK_NOFOLLOW, and AT_NO_AUTOMOUNT are supported. If useful, additional lookup flags to restrict path resolution as introduced with openat2() might be supported in the future. The mount_setattr() syscall can be expected to grow over time and is designed with extensibility in mind. It follows the extensible syscall pattern we have used with other syscalls such as openat2(), clone3(), sched_{set,get}attr(), and others. The set of mount options is passed in the uapi struct mount_attr which currently has the following layout: struct mount_attr { __u64 attr_set; __u64 attr_clr; __u64 propagation; __u64 userns_fd; }; The @attr_set and @attr_clr members are used to clear and set mount options. This way a user can e.g. request that a set of flags is to be raised such as turning mounts readonly by raising MOUNT_ATTR_RDONLY in @attr_set while at the same time requesting that another set of flags is to be lowered such as removing noexec from a mount tree by specifying MOUNT_ATTR_NOEXEC in @attr_clr. Note, since the MOUNT_ATTR_<atime> values are an enum starting from 0, not a bitmap, users wanting to transition to a different atime setting cannot simply specify the atime setting in @attr_set, but must also specify MOUNT_ATTR__ATIME in the @attr_clr field. So we ensure that MOUNT_ATTR__ATIME can't be partially set in @attr_clr and that @attr_set can't have any atime bits set if MOUNT_ATTR__ATIME isn't set in @attr_clr. The @propagation field lets callers specify the propagation type of a mount tree. Propagation is a single property that has four different settings and as such is not really a flag argument but an enum. Specifically, it would be unclear what setting and clearing propagation settings in combination would amount to. The legacy mount() syscall thus forbids the combination of multiple propagation settings too. The goal is to keep the semantics of mount propagation somewhat simple as they are overly complex as it is. The @userns_fd field lets user specify a user namespace whose idmapping becomes the idmapping of the mount. This is implemented and explained in detail in the next patch. [1]: commit 2e4b7fcd9260 ("[PATCH] r/o bind mounts: honor mount writer counts at remount") Link: https://lore.kernel.org/r/20210121131959.646623-35-christian.brauner@ubuntu.com Cc: David Howells <dhowells@redhat.com> Cc: Aleksa Sarai <cyphar@cyphar.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: linux-fsdevel@vger.kernel.org Cc: linux-api@vger.kernel.org Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
2021-01-21 13:19:53 +00:00
unlock_mount_hash();
if (kattr->propagation) {
if (err)
cleanup_group_ids(mnt, NULL);
namespace_unlock();
fs: add mount_setattr() This implements the missing mount_setattr() syscall. While the new mount api allows to change the properties of a superblock there is currently no way to change the properties of a mount or a mount tree using file descriptors which the new mount api is based on. In addition the old mount api has the restriction that mount options cannot be applied recursively. This hasn't changed since changing mount options on a per-mount basis was implemented in [1] and has been a frequent request not just for convenience but also for security reasons. The legacy mount syscall is unable to accommodate this behavior without introducing a whole new set of flags because MS_REC | MS_REMOUNT | MS_BIND | MS_RDONLY | MS_NOEXEC | [...] only apply the mount option to the topmost mount. Changing MS_REC to apply to the whole mount tree would mean introducing a significant uapi change and would likely cause significant regressions. The new mount_setattr() syscall allows to recursively clear and set mount options in one shot. Multiple calls to change mount options requesting the same changes are idempotent: int mount_setattr(int dfd, const char *path, unsigned flags, struct mount_attr *uattr, size_t usize); Flags to modify path resolution behavior are specified in the @flags argument. Currently, AT_EMPTY_PATH, AT_RECURSIVE, AT_SYMLINK_NOFOLLOW, and AT_NO_AUTOMOUNT are supported. If useful, additional lookup flags to restrict path resolution as introduced with openat2() might be supported in the future. The mount_setattr() syscall can be expected to grow over time and is designed with extensibility in mind. It follows the extensible syscall pattern we have used with other syscalls such as openat2(), clone3(), sched_{set,get}attr(), and others. The set of mount options is passed in the uapi struct mount_attr which currently has the following layout: struct mount_attr { __u64 attr_set; __u64 attr_clr; __u64 propagation; __u64 userns_fd; }; The @attr_set and @attr_clr members are used to clear and set mount options. This way a user can e.g. request that a set of flags is to be raised such as turning mounts readonly by raising MOUNT_ATTR_RDONLY in @attr_set while at the same time requesting that another set of flags is to be lowered such as removing noexec from a mount tree by specifying MOUNT_ATTR_NOEXEC in @attr_clr. Note, since the MOUNT_ATTR_<atime> values are an enum starting from 0, not a bitmap, users wanting to transition to a different atime setting cannot simply specify the atime setting in @attr_set, but must also specify MOUNT_ATTR__ATIME in the @attr_clr field. So we ensure that MOUNT_ATTR__ATIME can't be partially set in @attr_clr and that @attr_set can't have any atime bits set if MOUNT_ATTR__ATIME isn't set in @attr_clr. The @propagation field lets callers specify the propagation type of a mount tree. Propagation is a single property that has four different settings and as such is not really a flag argument but an enum. Specifically, it would be unclear what setting and clearing propagation settings in combination would amount to. The legacy mount() syscall thus forbids the combination of multiple propagation settings too. The goal is to keep the semantics of mount propagation somewhat simple as they are overly complex as it is. The @userns_fd field lets user specify a user namespace whose idmapping becomes the idmapping of the mount. This is implemented and explained in detail in the next patch. [1]: commit 2e4b7fcd9260 ("[PATCH] r/o bind mounts: honor mount writer counts at remount") Link: https://lore.kernel.org/r/20210121131959.646623-35-christian.brauner@ubuntu.com Cc: David Howells <dhowells@redhat.com> Cc: Aleksa Sarai <cyphar@cyphar.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: linux-fsdevel@vger.kernel.org Cc: linux-api@vger.kernel.org Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
2021-01-21 13:19:53 +00:00
}
return err;
}
fs: introduce MOUNT_ATTR_IDMAP Introduce a new mount bind mount property to allow idmapping mounts. The MOUNT_ATTR_IDMAP flag can be set via the new mount_setattr() syscall together with a file descriptor referring to a user namespace. The user namespace referenced by the namespace file descriptor will be attached to the bind mount. All interactions with the filesystem going through that mount will be mapped according to the mapping specified in the user namespace attached to it. Using user namespaces to mark mounts means we can reuse all the existing infrastructure in the kernel that already exists to handle idmappings and can also use this for permission checking to allow unprivileged user to create idmapped mounts in the future. Idmapping a mount is decoupled from the caller's user and mount namespace. This means idmapped mounts can be created in the initial user namespace which is an important use-case for systemd-homed, portable usb-sticks between systems, sharing data between the initial user namespace and unprivileged containers, and other use-cases that have been brought up. For example, assume a home directory where all files are owned by uid and gid 1000 and the home directory is brought to a new laptop where the user has id 12345. The system administrator can simply create a mount of this home directory with a mapping of 1000:12345:1 and other mappings to indicate the ids should be kept. (With this it is e.g. also possible to create idmapped mounts on the host with an identity mapping 1:1:100000 where the root user is not mapped. A user with root access that e.g. has been pivot rooted into such a mount on the host will be not be able to execute, read, write, or create files as root.) Given that mapping a mount is decoupled from the caller's user namespace a sufficiently privileged process such as a container manager can set up an idmapped mount for the container and the container can simply pivot root to it. There's no need for the container to do anything. The mount will appear correctly mapped independent of the user namespace the container uses. This means we don't need to mark a mount as idmappable. In order to create an idmapped mount the caller must currently be privileged in the user namespace of the superblock the mount belongs to. Once a mount has been idmapped we don't allow it to change its mapping. This keeps permission checking and life-cycle management simple. Users wanting to change the idmapped can always create a new detached mount with a different idmapping. Link: https://lore.kernel.org/r/20210121131959.646623-36-christian.brauner@ubuntu.com Cc: Christoph Hellwig <hch@lst.de> Cc: David Howells <dhowells@redhat.com> Cc: Mauricio Vásquez Bernal <mauricio@kinvolk.io> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: linux-fsdevel@vger.kernel.org Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
2021-01-21 13:19:54 +00:00
static int build_mount_idmapped(const struct mount_attr *attr, size_t usize,
struct mount_kattr *kattr, unsigned int flags)
{
int err = 0;
struct ns_common *ns;
struct user_namespace *mnt_userns;
struct fd f;
fs: introduce MOUNT_ATTR_IDMAP Introduce a new mount bind mount property to allow idmapping mounts. The MOUNT_ATTR_IDMAP flag can be set via the new mount_setattr() syscall together with a file descriptor referring to a user namespace. The user namespace referenced by the namespace file descriptor will be attached to the bind mount. All interactions with the filesystem going through that mount will be mapped according to the mapping specified in the user namespace attached to it. Using user namespaces to mark mounts means we can reuse all the existing infrastructure in the kernel that already exists to handle idmappings and can also use this for permission checking to allow unprivileged user to create idmapped mounts in the future. Idmapping a mount is decoupled from the caller's user and mount namespace. This means idmapped mounts can be created in the initial user namespace which is an important use-case for systemd-homed, portable usb-sticks between systems, sharing data between the initial user namespace and unprivileged containers, and other use-cases that have been brought up. For example, assume a home directory where all files are owned by uid and gid 1000 and the home directory is brought to a new laptop where the user has id 12345. The system administrator can simply create a mount of this home directory with a mapping of 1000:12345:1 and other mappings to indicate the ids should be kept. (With this it is e.g. also possible to create idmapped mounts on the host with an identity mapping 1:1:100000 where the root user is not mapped. A user with root access that e.g. has been pivot rooted into such a mount on the host will be not be able to execute, read, write, or create files as root.) Given that mapping a mount is decoupled from the caller's user namespace a sufficiently privileged process such as a container manager can set up an idmapped mount for the container and the container can simply pivot root to it. There's no need for the container to do anything. The mount will appear correctly mapped independent of the user namespace the container uses. This means we don't need to mark a mount as idmappable. In order to create an idmapped mount the caller must currently be privileged in the user namespace of the superblock the mount belongs to. Once a mount has been idmapped we don't allow it to change its mapping. This keeps permission checking and life-cycle management simple. Users wanting to change the idmapped can always create a new detached mount with a different idmapping. Link: https://lore.kernel.org/r/20210121131959.646623-36-christian.brauner@ubuntu.com Cc: Christoph Hellwig <hch@lst.de> Cc: David Howells <dhowells@redhat.com> Cc: Mauricio Vásquez Bernal <mauricio@kinvolk.io> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: linux-fsdevel@vger.kernel.org Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
2021-01-21 13:19:54 +00:00
if (!((attr->attr_set | attr->attr_clr) & MOUNT_ATTR_IDMAP))
return 0;
/*
* We currently do not support clearing an idmapped mount. If this ever
* is a use-case we can revisit this but for now let's keep it simple
* and not allow it.
*/
if (attr->attr_clr & MOUNT_ATTR_IDMAP)
return -EINVAL;
if (attr->userns_fd > INT_MAX)
return -EINVAL;
f = fdget(attr->userns_fd);
if (!fd_file(f))
fs: introduce MOUNT_ATTR_IDMAP Introduce a new mount bind mount property to allow idmapping mounts. The MOUNT_ATTR_IDMAP flag can be set via the new mount_setattr() syscall together with a file descriptor referring to a user namespace. The user namespace referenced by the namespace file descriptor will be attached to the bind mount. All interactions with the filesystem going through that mount will be mapped according to the mapping specified in the user namespace attached to it. Using user namespaces to mark mounts means we can reuse all the existing infrastructure in the kernel that already exists to handle idmappings and can also use this for permission checking to allow unprivileged user to create idmapped mounts in the future. Idmapping a mount is decoupled from the caller's user and mount namespace. This means idmapped mounts can be created in the initial user namespace which is an important use-case for systemd-homed, portable usb-sticks between systems, sharing data between the initial user namespace and unprivileged containers, and other use-cases that have been brought up. For example, assume a home directory where all files are owned by uid and gid 1000 and the home directory is brought to a new laptop where the user has id 12345. The system administrator can simply create a mount of this home directory with a mapping of 1000:12345:1 and other mappings to indicate the ids should be kept. (With this it is e.g. also possible to create idmapped mounts on the host with an identity mapping 1:1:100000 where the root user is not mapped. A user with root access that e.g. has been pivot rooted into such a mount on the host will be not be able to execute, read, write, or create files as root.) Given that mapping a mount is decoupled from the caller's user namespace a sufficiently privileged process such as a container manager can set up an idmapped mount for the container and the container can simply pivot root to it. There's no need for the container to do anything. The mount will appear correctly mapped independent of the user namespace the container uses. This means we don't need to mark a mount as idmappable. In order to create an idmapped mount the caller must currently be privileged in the user namespace of the superblock the mount belongs to. Once a mount has been idmapped we don't allow it to change its mapping. This keeps permission checking and life-cycle management simple. Users wanting to change the idmapped can always create a new detached mount with a different idmapping. Link: https://lore.kernel.org/r/20210121131959.646623-36-christian.brauner@ubuntu.com Cc: Christoph Hellwig <hch@lst.de> Cc: David Howells <dhowells@redhat.com> Cc: Mauricio Vásquez Bernal <mauricio@kinvolk.io> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: linux-fsdevel@vger.kernel.org Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
2021-01-21 13:19:54 +00:00
return -EBADF;
if (!proc_ns_file(fd_file(f))) {
fs: introduce MOUNT_ATTR_IDMAP Introduce a new mount bind mount property to allow idmapping mounts. The MOUNT_ATTR_IDMAP flag can be set via the new mount_setattr() syscall together with a file descriptor referring to a user namespace. The user namespace referenced by the namespace file descriptor will be attached to the bind mount. All interactions with the filesystem going through that mount will be mapped according to the mapping specified in the user namespace attached to it. Using user namespaces to mark mounts means we can reuse all the existing infrastructure in the kernel that already exists to handle idmappings and can also use this for permission checking to allow unprivileged user to create idmapped mounts in the future. Idmapping a mount is decoupled from the caller's user and mount namespace. This means idmapped mounts can be created in the initial user namespace which is an important use-case for systemd-homed, portable usb-sticks between systems, sharing data between the initial user namespace and unprivileged containers, and other use-cases that have been brought up. For example, assume a home directory where all files are owned by uid and gid 1000 and the home directory is brought to a new laptop where the user has id 12345. The system administrator can simply create a mount of this home directory with a mapping of 1000:12345:1 and other mappings to indicate the ids should be kept. (With this it is e.g. also possible to create idmapped mounts on the host with an identity mapping 1:1:100000 where the root user is not mapped. A user with root access that e.g. has been pivot rooted into such a mount on the host will be not be able to execute, read, write, or create files as root.) Given that mapping a mount is decoupled from the caller's user namespace a sufficiently privileged process such as a container manager can set up an idmapped mount for the container and the container can simply pivot root to it. There's no need for the container to do anything. The mount will appear correctly mapped independent of the user namespace the container uses. This means we don't need to mark a mount as idmappable. In order to create an idmapped mount the caller must currently be privileged in the user namespace of the superblock the mount belongs to. Once a mount has been idmapped we don't allow it to change its mapping. This keeps permission checking and life-cycle management simple. Users wanting to change the idmapped can always create a new detached mount with a different idmapping. Link: https://lore.kernel.org/r/20210121131959.646623-36-christian.brauner@ubuntu.com Cc: Christoph Hellwig <hch@lst.de> Cc: David Howells <dhowells@redhat.com> Cc: Mauricio Vásquez Bernal <mauricio@kinvolk.io> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: linux-fsdevel@vger.kernel.org Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
2021-01-21 13:19:54 +00:00
err = -EINVAL;
goto out_fput;
}
ns = get_proc_ns(file_inode(fd_file(f)));
fs: introduce MOUNT_ATTR_IDMAP Introduce a new mount bind mount property to allow idmapping mounts. The MOUNT_ATTR_IDMAP flag can be set via the new mount_setattr() syscall together with a file descriptor referring to a user namespace. The user namespace referenced by the namespace file descriptor will be attached to the bind mount. All interactions with the filesystem going through that mount will be mapped according to the mapping specified in the user namespace attached to it. Using user namespaces to mark mounts means we can reuse all the existing infrastructure in the kernel that already exists to handle idmappings and can also use this for permission checking to allow unprivileged user to create idmapped mounts in the future. Idmapping a mount is decoupled from the caller's user and mount namespace. This means idmapped mounts can be created in the initial user namespace which is an important use-case for systemd-homed, portable usb-sticks between systems, sharing data between the initial user namespace and unprivileged containers, and other use-cases that have been brought up. For example, assume a home directory where all files are owned by uid and gid 1000 and the home directory is brought to a new laptop where the user has id 12345. The system administrator can simply create a mount of this home directory with a mapping of 1000:12345:1 and other mappings to indicate the ids should be kept. (With this it is e.g. also possible to create idmapped mounts on the host with an identity mapping 1:1:100000 where the root user is not mapped. A user with root access that e.g. has been pivot rooted into such a mount on the host will be not be able to execute, read, write, or create files as root.) Given that mapping a mount is decoupled from the caller's user namespace a sufficiently privileged process such as a container manager can set up an idmapped mount for the container and the container can simply pivot root to it. There's no need for the container to do anything. The mount will appear correctly mapped independent of the user namespace the container uses. This means we don't need to mark a mount as idmappable. In order to create an idmapped mount the caller must currently be privileged in the user namespace of the superblock the mount belongs to. Once a mount has been idmapped we don't allow it to change its mapping. This keeps permission checking and life-cycle management simple. Users wanting to change the idmapped can always create a new detached mount with a different idmapping. Link: https://lore.kernel.org/r/20210121131959.646623-36-christian.brauner@ubuntu.com Cc: Christoph Hellwig <hch@lst.de> Cc: David Howells <dhowells@redhat.com> Cc: Mauricio Vásquez Bernal <mauricio@kinvolk.io> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: linux-fsdevel@vger.kernel.org Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
2021-01-21 13:19:54 +00:00
if (ns->ops->type != CLONE_NEWUSER) {
err = -EINVAL;
goto out_fput;
}
/*
fs: support mapped mounts of mapped filesystems In previous patches we added new and modified existing helpers to handle idmapped mounts of filesystems mounted with an idmapping. In this final patch we convert all relevant places in the vfs to actually pass the filesystem's idmapping into these helpers. With this the vfs is in shape to handle idmapped mounts of filesystems mounted with an idmapping. Note that this is just the generic infrastructure. Actually adding support for idmapped mounts to a filesystem mountable with an idmapping is follow-up work. In this patch we extend the definition of an idmapped mount from a mount that that has the initial idmapping attached to it to a mount that has an idmapping attached to it which is not the same as the idmapping the filesystem was mounted with. As before we do not allow the initial idmapping to be attached to a mount. In addition this patch prevents that the idmapping the filesystem was mounted with can be attached to a mount created based on this filesystem. This has multiple reasons and advantages. First, attaching the initial idmapping or the filesystem's idmapping doesn't make much sense as in both cases the values of the i_{g,u}id and other places where k{g,u}ids are used do not change. Second, a user that really wants to do this for whatever reason can just create a separate dedicated identical idmapping to attach to the mount. Third, we can continue to use the initial idmapping as an indicator that a mount is not idmapped allowing us to continue to keep passing the initial idmapping into the mapping helpers to tell them that something isn't an idmapped mount even if the filesystem is mounted with an idmapping. Link: https://lore.kernel.org/r/20211123114227.3124056-11-brauner@kernel.org (v1) Link: https://lore.kernel.org/r/20211130121032.3753852-11-brauner@kernel.org (v2) Link: https://lore.kernel.org/r/20211203111707.3901969-11-brauner@kernel.org Cc: Seth Forshee <sforshee@digitalocean.com> Cc: Amir Goldstein <amir73il@gmail.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Al Viro <viro@zeniv.linux.org.uk> CC: linux-fsdevel@vger.kernel.org Reviewed-by: Seth Forshee <sforshee@digitalocean.com> Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
2021-12-03 11:17:07 +00:00
* The initial idmapping cannot be used to create an idmapped
* mount. We use the initial idmapping as an indicator of a mount
* that is not idmapped. It can simply be passed into helpers that
* are aware of idmapped mounts as a convenient shortcut. A user
* can just create a dedicated identity mapping to achieve the same
* result.
fs: introduce MOUNT_ATTR_IDMAP Introduce a new mount bind mount property to allow idmapping mounts. The MOUNT_ATTR_IDMAP flag can be set via the new mount_setattr() syscall together with a file descriptor referring to a user namespace. The user namespace referenced by the namespace file descriptor will be attached to the bind mount. All interactions with the filesystem going through that mount will be mapped according to the mapping specified in the user namespace attached to it. Using user namespaces to mark mounts means we can reuse all the existing infrastructure in the kernel that already exists to handle idmappings and can also use this for permission checking to allow unprivileged user to create idmapped mounts in the future. Idmapping a mount is decoupled from the caller's user and mount namespace. This means idmapped mounts can be created in the initial user namespace which is an important use-case for systemd-homed, portable usb-sticks between systems, sharing data between the initial user namespace and unprivileged containers, and other use-cases that have been brought up. For example, assume a home directory where all files are owned by uid and gid 1000 and the home directory is brought to a new laptop where the user has id 12345. The system administrator can simply create a mount of this home directory with a mapping of 1000:12345:1 and other mappings to indicate the ids should be kept. (With this it is e.g. also possible to create idmapped mounts on the host with an identity mapping 1:1:100000 where the root user is not mapped. A user with root access that e.g. has been pivot rooted into such a mount on the host will be not be able to execute, read, write, or create files as root.) Given that mapping a mount is decoupled from the caller's user namespace a sufficiently privileged process such as a container manager can set up an idmapped mount for the container and the container can simply pivot root to it. There's no need for the container to do anything. The mount will appear correctly mapped independent of the user namespace the container uses. This means we don't need to mark a mount as idmappable. In order to create an idmapped mount the caller must currently be privileged in the user namespace of the superblock the mount belongs to. Once a mount has been idmapped we don't allow it to change its mapping. This keeps permission checking and life-cycle management simple. Users wanting to change the idmapped can always create a new detached mount with a different idmapping. Link: https://lore.kernel.org/r/20210121131959.646623-36-christian.brauner@ubuntu.com Cc: Christoph Hellwig <hch@lst.de> Cc: David Howells <dhowells@redhat.com> Cc: Mauricio Vásquez Bernal <mauricio@kinvolk.io> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: linux-fsdevel@vger.kernel.org Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
2021-01-21 13:19:54 +00:00
*/
mnt_userns = container_of(ns, struct user_namespace, ns);
if (mnt_userns == &init_user_ns) {
fs: introduce MOUNT_ATTR_IDMAP Introduce a new mount bind mount property to allow idmapping mounts. The MOUNT_ATTR_IDMAP flag can be set via the new mount_setattr() syscall together with a file descriptor referring to a user namespace. The user namespace referenced by the namespace file descriptor will be attached to the bind mount. All interactions with the filesystem going through that mount will be mapped according to the mapping specified in the user namespace attached to it. Using user namespaces to mark mounts means we can reuse all the existing infrastructure in the kernel that already exists to handle idmappings and can also use this for permission checking to allow unprivileged user to create idmapped mounts in the future. Idmapping a mount is decoupled from the caller's user and mount namespace. This means idmapped mounts can be created in the initial user namespace which is an important use-case for systemd-homed, portable usb-sticks between systems, sharing data between the initial user namespace and unprivileged containers, and other use-cases that have been brought up. For example, assume a home directory where all files are owned by uid and gid 1000 and the home directory is brought to a new laptop where the user has id 12345. The system administrator can simply create a mount of this home directory with a mapping of 1000:12345:1 and other mappings to indicate the ids should be kept. (With this it is e.g. also possible to create idmapped mounts on the host with an identity mapping 1:1:100000 where the root user is not mapped. A user with root access that e.g. has been pivot rooted into such a mount on the host will be not be able to execute, read, write, or create files as root.) Given that mapping a mount is decoupled from the caller's user namespace a sufficiently privileged process such as a container manager can set up an idmapped mount for the container and the container can simply pivot root to it. There's no need for the container to do anything. The mount will appear correctly mapped independent of the user namespace the container uses. This means we don't need to mark a mount as idmappable. In order to create an idmapped mount the caller must currently be privileged in the user namespace of the superblock the mount belongs to. Once a mount has been idmapped we don't allow it to change its mapping. This keeps permission checking and life-cycle management simple. Users wanting to change the idmapped can always create a new detached mount with a different idmapping. Link: https://lore.kernel.org/r/20210121131959.646623-36-christian.brauner@ubuntu.com Cc: Christoph Hellwig <hch@lst.de> Cc: David Howells <dhowells@redhat.com> Cc: Mauricio Vásquez Bernal <mauricio@kinvolk.io> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: linux-fsdevel@vger.kernel.org Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
2021-01-21 13:19:54 +00:00
err = -EPERM;
goto out_fput;
}
/* We're not controlling the target namespace. */
if (!ns_capable(mnt_userns, CAP_SYS_ADMIN)) {
err = -EPERM;
goto out_fput;
}
fs: introduce MOUNT_ATTR_IDMAP Introduce a new mount bind mount property to allow idmapping mounts. The MOUNT_ATTR_IDMAP flag can be set via the new mount_setattr() syscall together with a file descriptor referring to a user namespace. The user namespace referenced by the namespace file descriptor will be attached to the bind mount. All interactions with the filesystem going through that mount will be mapped according to the mapping specified in the user namespace attached to it. Using user namespaces to mark mounts means we can reuse all the existing infrastructure in the kernel that already exists to handle idmappings and can also use this for permission checking to allow unprivileged user to create idmapped mounts in the future. Idmapping a mount is decoupled from the caller's user and mount namespace. This means idmapped mounts can be created in the initial user namespace which is an important use-case for systemd-homed, portable usb-sticks between systems, sharing data between the initial user namespace and unprivileged containers, and other use-cases that have been brought up. For example, assume a home directory where all files are owned by uid and gid 1000 and the home directory is brought to a new laptop where the user has id 12345. The system administrator can simply create a mount of this home directory with a mapping of 1000:12345:1 and other mappings to indicate the ids should be kept. (With this it is e.g. also possible to create idmapped mounts on the host with an identity mapping 1:1:100000 where the root user is not mapped. A user with root access that e.g. has been pivot rooted into such a mount on the host will be not be able to execute, read, write, or create files as root.) Given that mapping a mount is decoupled from the caller's user namespace a sufficiently privileged process such as a container manager can set up an idmapped mount for the container and the container can simply pivot root to it. There's no need for the container to do anything. The mount will appear correctly mapped independent of the user namespace the container uses. This means we don't need to mark a mount as idmappable. In order to create an idmapped mount the caller must currently be privileged in the user namespace of the superblock the mount belongs to. Once a mount has been idmapped we don't allow it to change its mapping. This keeps permission checking and life-cycle management simple. Users wanting to change the idmapped can always create a new detached mount with a different idmapping. Link: https://lore.kernel.org/r/20210121131959.646623-36-christian.brauner@ubuntu.com Cc: Christoph Hellwig <hch@lst.de> Cc: David Howells <dhowells@redhat.com> Cc: Mauricio Vásquez Bernal <mauricio@kinvolk.io> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: linux-fsdevel@vger.kernel.org Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
2021-01-21 13:19:54 +00:00
kattr->mnt_userns = get_user_ns(mnt_userns);
out_fput:
fdput(f);
fs: introduce MOUNT_ATTR_IDMAP Introduce a new mount bind mount property to allow idmapping mounts. The MOUNT_ATTR_IDMAP flag can be set via the new mount_setattr() syscall together with a file descriptor referring to a user namespace. The user namespace referenced by the namespace file descriptor will be attached to the bind mount. All interactions with the filesystem going through that mount will be mapped according to the mapping specified in the user namespace attached to it. Using user namespaces to mark mounts means we can reuse all the existing infrastructure in the kernel that already exists to handle idmappings and can also use this for permission checking to allow unprivileged user to create idmapped mounts in the future. Idmapping a mount is decoupled from the caller's user and mount namespace. This means idmapped mounts can be created in the initial user namespace which is an important use-case for systemd-homed, portable usb-sticks between systems, sharing data between the initial user namespace and unprivileged containers, and other use-cases that have been brought up. For example, assume a home directory where all files are owned by uid and gid 1000 and the home directory is brought to a new laptop where the user has id 12345. The system administrator can simply create a mount of this home directory with a mapping of 1000:12345:1 and other mappings to indicate the ids should be kept. (With this it is e.g. also possible to create idmapped mounts on the host with an identity mapping 1:1:100000 where the root user is not mapped. A user with root access that e.g. has been pivot rooted into such a mount on the host will be not be able to execute, read, write, or create files as root.) Given that mapping a mount is decoupled from the caller's user namespace a sufficiently privileged process such as a container manager can set up an idmapped mount for the container and the container can simply pivot root to it. There's no need for the container to do anything. The mount will appear correctly mapped independent of the user namespace the container uses. This means we don't need to mark a mount as idmappable. In order to create an idmapped mount the caller must currently be privileged in the user namespace of the superblock the mount belongs to. Once a mount has been idmapped we don't allow it to change its mapping. This keeps permission checking and life-cycle management simple. Users wanting to change the idmapped can always create a new detached mount with a different idmapping. Link: https://lore.kernel.org/r/20210121131959.646623-36-christian.brauner@ubuntu.com Cc: Christoph Hellwig <hch@lst.de> Cc: David Howells <dhowells@redhat.com> Cc: Mauricio Vásquez Bernal <mauricio@kinvolk.io> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: linux-fsdevel@vger.kernel.org Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
2021-01-21 13:19:54 +00:00
return err;
}
static int build_mount_kattr(const struct mount_attr *attr, size_t usize,
fs: add mount_setattr() This implements the missing mount_setattr() syscall. While the new mount api allows to change the properties of a superblock there is currently no way to change the properties of a mount or a mount tree using file descriptors which the new mount api is based on. In addition the old mount api has the restriction that mount options cannot be applied recursively. This hasn't changed since changing mount options on a per-mount basis was implemented in [1] and has been a frequent request not just for convenience but also for security reasons. The legacy mount syscall is unable to accommodate this behavior without introducing a whole new set of flags because MS_REC | MS_REMOUNT | MS_BIND | MS_RDONLY | MS_NOEXEC | [...] only apply the mount option to the topmost mount. Changing MS_REC to apply to the whole mount tree would mean introducing a significant uapi change and would likely cause significant regressions. The new mount_setattr() syscall allows to recursively clear and set mount options in one shot. Multiple calls to change mount options requesting the same changes are idempotent: int mount_setattr(int dfd, const char *path, unsigned flags, struct mount_attr *uattr, size_t usize); Flags to modify path resolution behavior are specified in the @flags argument. Currently, AT_EMPTY_PATH, AT_RECURSIVE, AT_SYMLINK_NOFOLLOW, and AT_NO_AUTOMOUNT are supported. If useful, additional lookup flags to restrict path resolution as introduced with openat2() might be supported in the future. The mount_setattr() syscall can be expected to grow over time and is designed with extensibility in mind. It follows the extensible syscall pattern we have used with other syscalls such as openat2(), clone3(), sched_{set,get}attr(), and others. The set of mount options is passed in the uapi struct mount_attr which currently has the following layout: struct mount_attr { __u64 attr_set; __u64 attr_clr; __u64 propagation; __u64 userns_fd; }; The @attr_set and @attr_clr members are used to clear and set mount options. This way a user can e.g. request that a set of flags is to be raised such as turning mounts readonly by raising MOUNT_ATTR_RDONLY in @attr_set while at the same time requesting that another set of flags is to be lowered such as removing noexec from a mount tree by specifying MOUNT_ATTR_NOEXEC in @attr_clr. Note, since the MOUNT_ATTR_<atime> values are an enum starting from 0, not a bitmap, users wanting to transition to a different atime setting cannot simply specify the atime setting in @attr_set, but must also specify MOUNT_ATTR__ATIME in the @attr_clr field. So we ensure that MOUNT_ATTR__ATIME can't be partially set in @attr_clr and that @attr_set can't have any atime bits set if MOUNT_ATTR__ATIME isn't set in @attr_clr. The @propagation field lets callers specify the propagation type of a mount tree. Propagation is a single property that has four different settings and as such is not really a flag argument but an enum. Specifically, it would be unclear what setting and clearing propagation settings in combination would amount to. The legacy mount() syscall thus forbids the combination of multiple propagation settings too. The goal is to keep the semantics of mount propagation somewhat simple as they are overly complex as it is. The @userns_fd field lets user specify a user namespace whose idmapping becomes the idmapping of the mount. This is implemented and explained in detail in the next patch. [1]: commit 2e4b7fcd9260 ("[PATCH] r/o bind mounts: honor mount writer counts at remount") Link: https://lore.kernel.org/r/20210121131959.646623-35-christian.brauner@ubuntu.com Cc: David Howells <dhowells@redhat.com> Cc: Aleksa Sarai <cyphar@cyphar.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: linux-fsdevel@vger.kernel.org Cc: linux-api@vger.kernel.org Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
2021-01-21 13:19:53 +00:00
struct mount_kattr *kattr, unsigned int flags)
{
unsigned int lookup_flags = LOOKUP_AUTOMOUNT | LOOKUP_FOLLOW;
if (flags & AT_NO_AUTOMOUNT)
lookup_flags &= ~LOOKUP_AUTOMOUNT;
if (flags & AT_SYMLINK_NOFOLLOW)
lookup_flags &= ~LOOKUP_FOLLOW;
if (flags & AT_EMPTY_PATH)
lookup_flags |= LOOKUP_EMPTY;
*kattr = (struct mount_kattr) {
.lookup_flags = lookup_flags,
.recurse = !!(flags & AT_RECURSIVE),
};
if (attr->propagation & ~MOUNT_SETATTR_PROPAGATION_FLAGS)
return -EINVAL;
if (hweight32(attr->propagation & MOUNT_SETATTR_PROPAGATION_FLAGS) > 1)
return -EINVAL;
kattr->propagation = attr->propagation;
if ((attr->attr_set | attr->attr_clr) & ~MOUNT_SETATTR_VALID_FLAGS)
return -EINVAL;
kattr->attr_set = attr_flags_to_mnt_flags(attr->attr_set);
kattr->attr_clr = attr_flags_to_mnt_flags(attr->attr_clr);
/*
* Since the MOUNT_ATTR_<atime> values are an enum, not a bitmap,
* users wanting to transition to a different atime setting cannot
* simply specify the atime setting in @attr_set, but must also
* specify MOUNT_ATTR__ATIME in the @attr_clr field.
* So ensure that MOUNT_ATTR__ATIME can't be partially set in
* @attr_clr and that @attr_set can't have any atime bits set if
* MOUNT_ATTR__ATIME isn't set in @attr_clr.
*/
if (attr->attr_clr & MOUNT_ATTR__ATIME) {
if ((attr->attr_clr & MOUNT_ATTR__ATIME) != MOUNT_ATTR__ATIME)
return -EINVAL;
/*
* Clear all previous time settings as they are mutually
* exclusive.
*/
kattr->attr_clr |= MNT_RELATIME | MNT_NOATIME;
switch (attr->attr_set & MOUNT_ATTR__ATIME) {
case MOUNT_ATTR_RELATIME:
kattr->attr_set |= MNT_RELATIME;
break;
case MOUNT_ATTR_NOATIME:
kattr->attr_set |= MNT_NOATIME;
break;
case MOUNT_ATTR_STRICTATIME:
break;
default:
return -EINVAL;
}
} else {
if (attr->attr_set & MOUNT_ATTR__ATIME)
return -EINVAL;
}
fs: introduce MOUNT_ATTR_IDMAP Introduce a new mount bind mount property to allow idmapping mounts. The MOUNT_ATTR_IDMAP flag can be set via the new mount_setattr() syscall together with a file descriptor referring to a user namespace. The user namespace referenced by the namespace file descriptor will be attached to the bind mount. All interactions with the filesystem going through that mount will be mapped according to the mapping specified in the user namespace attached to it. Using user namespaces to mark mounts means we can reuse all the existing infrastructure in the kernel that already exists to handle idmappings and can also use this for permission checking to allow unprivileged user to create idmapped mounts in the future. Idmapping a mount is decoupled from the caller's user and mount namespace. This means idmapped mounts can be created in the initial user namespace which is an important use-case for systemd-homed, portable usb-sticks between systems, sharing data between the initial user namespace and unprivileged containers, and other use-cases that have been brought up. For example, assume a home directory where all files are owned by uid and gid 1000 and the home directory is brought to a new laptop where the user has id 12345. The system administrator can simply create a mount of this home directory with a mapping of 1000:12345:1 and other mappings to indicate the ids should be kept. (With this it is e.g. also possible to create idmapped mounts on the host with an identity mapping 1:1:100000 where the root user is not mapped. A user with root access that e.g. has been pivot rooted into such a mount on the host will be not be able to execute, read, write, or create files as root.) Given that mapping a mount is decoupled from the caller's user namespace a sufficiently privileged process such as a container manager can set up an idmapped mount for the container and the container can simply pivot root to it. There's no need for the container to do anything. The mount will appear correctly mapped independent of the user namespace the container uses. This means we don't need to mark a mount as idmappable. In order to create an idmapped mount the caller must currently be privileged in the user namespace of the superblock the mount belongs to. Once a mount has been idmapped we don't allow it to change its mapping. This keeps permission checking and life-cycle management simple. Users wanting to change the idmapped can always create a new detached mount with a different idmapping. Link: https://lore.kernel.org/r/20210121131959.646623-36-christian.brauner@ubuntu.com Cc: Christoph Hellwig <hch@lst.de> Cc: David Howells <dhowells@redhat.com> Cc: Mauricio Vásquez Bernal <mauricio@kinvolk.io> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: linux-fsdevel@vger.kernel.org Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
2021-01-21 13:19:54 +00:00
return build_mount_idmapped(attr, usize, kattr, flags);
}
static void finish_mount_kattr(struct mount_kattr *kattr)
{
put_user_ns(kattr->mnt_userns);
kattr->mnt_userns = NULL;
fs: introduce dedicated idmap type for mounts Last cycle we've already made the interaction with idmapped mounts more robust and type safe by introducing the vfs{g,u}id_t type. This cycle we concluded the conversion and removed the legacy helpers. Currently we still pass around the plain namespace that was attached to a mount. This is in general pretty convenient but it makes it easy to conflate filesystem and mount namespaces and what different roles they have to play. Especially for filesystem developers without much experience in this area this is an easy source for bugs. Instead of passing the plain namespace we introduce a dedicated type struct mnt_idmap and replace the pointer with a pointer to a struct mnt_idmap. There are no semantic or size changes for the mount struct caused by this. We then start converting all places aware of idmapped mounts to rely on struct mnt_idmap. Once the conversion is done all helpers down to the really low-level make_vfs{g,u}id() and from_vfs{g,u}id() will take a struct mnt_idmap argument instead of two namespace arguments. This way it becomes impossible to conflate the two, removing and thus eliminating the possibility of any bugs. Fwiw, I fixed some issues in that area a while ago in ntfs3 and ksmbd in the past. Afterwards, only low-level code can ultimately use the associated namespace for any permission checks. Even most of the vfs can be ultimately completely oblivious about this and filesystems will never interact with it directly in any form in the future. A struct mnt_idmap currently encompasses a simple refcount and a pointer to the relevant namespace the mount is idmapped to. If a mount isn't idmapped then it will point to a static nop_mnt_idmap. If it is an idmapped mount it will point to a new struct mnt_idmap. As usual there are no allocations or anything happening for non-idmapped mounts. Everthing is carefully written to be a nop for non-idmapped mounts as has always been the case. If an idmapped mount or mount tree is created a new struct mnt_idmap is allocated and a reference taken on the relevant namespace. For each mount in a mount tree that gets idmapped or a mount that inherits the idmap when it is cloned the reference count on the associated struct mnt_idmap is bumped. Just a reminder that we only allow a mount to change it's idmapping a single time and only if it hasn't already been attached to the filesystems and has no active writers. The actual changes are fairly straightforward. This will have huge benefits for maintenance and security in the long run even if it causes some churn. I'm aware that there's some cost for all of you. And I'll commit to doing this work and make this as painless as I can. Note that this also makes it possible to extend struct mount_idmap in the future. For example, it would be possible to place the namespace pointer in an anonymous union together with an idmapping struct. This would allow us to expose an api to userspace that would let it specify idmappings directly instead of having to go through the detour of setting up namespaces at all. This just adds the infrastructure and doesn't do any conversions. Reviewed-by: Seth Forshee (DigitalOcean) <sforshee@kernel.org> Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
2022-10-26 10:51:27 +00:00
if (kattr->mnt_idmap)
mnt_idmap_put(kattr->mnt_idmap);
fs: add mount_setattr() This implements the missing mount_setattr() syscall. While the new mount api allows to change the properties of a superblock there is currently no way to change the properties of a mount or a mount tree using file descriptors which the new mount api is based on. In addition the old mount api has the restriction that mount options cannot be applied recursively. This hasn't changed since changing mount options on a per-mount basis was implemented in [1] and has been a frequent request not just for convenience but also for security reasons. The legacy mount syscall is unable to accommodate this behavior without introducing a whole new set of flags because MS_REC | MS_REMOUNT | MS_BIND | MS_RDONLY | MS_NOEXEC | [...] only apply the mount option to the topmost mount. Changing MS_REC to apply to the whole mount tree would mean introducing a significant uapi change and would likely cause significant regressions. The new mount_setattr() syscall allows to recursively clear and set mount options in one shot. Multiple calls to change mount options requesting the same changes are idempotent: int mount_setattr(int dfd, const char *path, unsigned flags, struct mount_attr *uattr, size_t usize); Flags to modify path resolution behavior are specified in the @flags argument. Currently, AT_EMPTY_PATH, AT_RECURSIVE, AT_SYMLINK_NOFOLLOW, and AT_NO_AUTOMOUNT are supported. If useful, additional lookup flags to restrict path resolution as introduced with openat2() might be supported in the future. The mount_setattr() syscall can be expected to grow over time and is designed with extensibility in mind. It follows the extensible syscall pattern we have used with other syscalls such as openat2(), clone3(), sched_{set,get}attr(), and others. The set of mount options is passed in the uapi struct mount_attr which currently has the following layout: struct mount_attr { __u64 attr_set; __u64 attr_clr; __u64 propagation; __u64 userns_fd; }; The @attr_set and @attr_clr members are used to clear and set mount options. This way a user can e.g. request that a set of flags is to be raised such as turning mounts readonly by raising MOUNT_ATTR_RDONLY in @attr_set while at the same time requesting that another set of flags is to be lowered such as removing noexec from a mount tree by specifying MOUNT_ATTR_NOEXEC in @attr_clr. Note, since the MOUNT_ATTR_<atime> values are an enum starting from 0, not a bitmap, users wanting to transition to a different atime setting cannot simply specify the atime setting in @attr_set, but must also specify MOUNT_ATTR__ATIME in the @attr_clr field. So we ensure that MOUNT_ATTR__ATIME can't be partially set in @attr_clr and that @attr_set can't have any atime bits set if MOUNT_ATTR__ATIME isn't set in @attr_clr. The @propagation field lets callers specify the propagation type of a mount tree. Propagation is a single property that has four different settings and as such is not really a flag argument but an enum. Specifically, it would be unclear what setting and clearing propagation settings in combination would amount to. The legacy mount() syscall thus forbids the combination of multiple propagation settings too. The goal is to keep the semantics of mount propagation somewhat simple as they are overly complex as it is. The @userns_fd field lets user specify a user namespace whose idmapping becomes the idmapping of the mount. This is implemented and explained in detail in the next patch. [1]: commit 2e4b7fcd9260 ("[PATCH] r/o bind mounts: honor mount writer counts at remount") Link: https://lore.kernel.org/r/20210121131959.646623-35-christian.brauner@ubuntu.com Cc: David Howells <dhowells@redhat.com> Cc: Aleksa Sarai <cyphar@cyphar.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: linux-fsdevel@vger.kernel.org Cc: linux-api@vger.kernel.org Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
2021-01-21 13:19:53 +00:00
}
SYSCALL_DEFINE5(mount_setattr, int, dfd, const char __user *, path,
unsigned int, flags, struct mount_attr __user *, uattr,
size_t, usize)
{
int err;
struct path target;
struct mount_attr attr;
struct mount_kattr kattr;
BUILD_BUG_ON(sizeof(struct mount_attr) != MOUNT_ATTR_SIZE_VER0);
if (flags & ~(AT_EMPTY_PATH |
AT_RECURSIVE |
AT_SYMLINK_NOFOLLOW |
AT_NO_AUTOMOUNT))
return -EINVAL;
if (unlikely(usize > PAGE_SIZE))
return -E2BIG;
if (unlikely(usize < MOUNT_ATTR_SIZE_VER0))
return -EINVAL;
if (!may_mount())
return -EPERM;
err = copy_struct_from_user(&attr, sizeof(attr), uattr, usize);
if (err)
return err;
/* Don't bother walking through the mounts if this is a nop. */
if (attr.attr_set == 0 &&
attr.attr_clr == 0 &&
attr.propagation == 0)
return 0;
fs: introduce MOUNT_ATTR_IDMAP Introduce a new mount bind mount property to allow idmapping mounts. The MOUNT_ATTR_IDMAP flag can be set via the new mount_setattr() syscall together with a file descriptor referring to a user namespace. The user namespace referenced by the namespace file descriptor will be attached to the bind mount. All interactions with the filesystem going through that mount will be mapped according to the mapping specified in the user namespace attached to it. Using user namespaces to mark mounts means we can reuse all the existing infrastructure in the kernel that already exists to handle idmappings and can also use this for permission checking to allow unprivileged user to create idmapped mounts in the future. Idmapping a mount is decoupled from the caller's user and mount namespace. This means idmapped mounts can be created in the initial user namespace which is an important use-case for systemd-homed, portable usb-sticks between systems, sharing data between the initial user namespace and unprivileged containers, and other use-cases that have been brought up. For example, assume a home directory where all files are owned by uid and gid 1000 and the home directory is brought to a new laptop where the user has id 12345. The system administrator can simply create a mount of this home directory with a mapping of 1000:12345:1 and other mappings to indicate the ids should be kept. (With this it is e.g. also possible to create idmapped mounts on the host with an identity mapping 1:1:100000 where the root user is not mapped. A user with root access that e.g. has been pivot rooted into such a mount on the host will be not be able to execute, read, write, or create files as root.) Given that mapping a mount is decoupled from the caller's user namespace a sufficiently privileged process such as a container manager can set up an idmapped mount for the container and the container can simply pivot root to it. There's no need for the container to do anything. The mount will appear correctly mapped independent of the user namespace the container uses. This means we don't need to mark a mount as idmappable. In order to create an idmapped mount the caller must currently be privileged in the user namespace of the superblock the mount belongs to. Once a mount has been idmapped we don't allow it to change its mapping. This keeps permission checking and life-cycle management simple. Users wanting to change the idmapped can always create a new detached mount with a different idmapping. Link: https://lore.kernel.org/r/20210121131959.646623-36-christian.brauner@ubuntu.com Cc: Christoph Hellwig <hch@lst.de> Cc: David Howells <dhowells@redhat.com> Cc: Mauricio Vásquez Bernal <mauricio@kinvolk.io> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: linux-fsdevel@vger.kernel.org Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
2021-01-21 13:19:54 +00:00
err = build_mount_kattr(&attr, usize, &kattr, flags);
fs: add mount_setattr() This implements the missing mount_setattr() syscall. While the new mount api allows to change the properties of a superblock there is currently no way to change the properties of a mount or a mount tree using file descriptors which the new mount api is based on. In addition the old mount api has the restriction that mount options cannot be applied recursively. This hasn't changed since changing mount options on a per-mount basis was implemented in [1] and has been a frequent request not just for convenience but also for security reasons. The legacy mount syscall is unable to accommodate this behavior without introducing a whole new set of flags because MS_REC | MS_REMOUNT | MS_BIND | MS_RDONLY | MS_NOEXEC | [...] only apply the mount option to the topmost mount. Changing MS_REC to apply to the whole mount tree would mean introducing a significant uapi change and would likely cause significant regressions. The new mount_setattr() syscall allows to recursively clear and set mount options in one shot. Multiple calls to change mount options requesting the same changes are idempotent: int mount_setattr(int dfd, const char *path, unsigned flags, struct mount_attr *uattr, size_t usize); Flags to modify path resolution behavior are specified in the @flags argument. Currently, AT_EMPTY_PATH, AT_RECURSIVE, AT_SYMLINK_NOFOLLOW, and AT_NO_AUTOMOUNT are supported. If useful, additional lookup flags to restrict path resolution as introduced with openat2() might be supported in the future. The mount_setattr() syscall can be expected to grow over time and is designed with extensibility in mind. It follows the extensible syscall pattern we have used with other syscalls such as openat2(), clone3(), sched_{set,get}attr(), and others. The set of mount options is passed in the uapi struct mount_attr which currently has the following layout: struct mount_attr { __u64 attr_set; __u64 attr_clr; __u64 propagation; __u64 userns_fd; }; The @attr_set and @attr_clr members are used to clear and set mount options. This way a user can e.g. request that a set of flags is to be raised such as turning mounts readonly by raising MOUNT_ATTR_RDONLY in @attr_set while at the same time requesting that another set of flags is to be lowered such as removing noexec from a mount tree by specifying MOUNT_ATTR_NOEXEC in @attr_clr. Note, since the MOUNT_ATTR_<atime> values are an enum starting from 0, not a bitmap, users wanting to transition to a different atime setting cannot simply specify the atime setting in @attr_set, but must also specify MOUNT_ATTR__ATIME in the @attr_clr field. So we ensure that MOUNT_ATTR__ATIME can't be partially set in @attr_clr and that @attr_set can't have any atime bits set if MOUNT_ATTR__ATIME isn't set in @attr_clr. The @propagation field lets callers specify the propagation type of a mount tree. Propagation is a single property that has four different settings and as such is not really a flag argument but an enum. Specifically, it would be unclear what setting and clearing propagation settings in combination would amount to. The legacy mount() syscall thus forbids the combination of multiple propagation settings too. The goal is to keep the semantics of mount propagation somewhat simple as they are overly complex as it is. The @userns_fd field lets user specify a user namespace whose idmapping becomes the idmapping of the mount. This is implemented and explained in detail in the next patch. [1]: commit 2e4b7fcd9260 ("[PATCH] r/o bind mounts: honor mount writer counts at remount") Link: https://lore.kernel.org/r/20210121131959.646623-35-christian.brauner@ubuntu.com Cc: David Howells <dhowells@redhat.com> Cc: Aleksa Sarai <cyphar@cyphar.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: linux-fsdevel@vger.kernel.org Cc: linux-api@vger.kernel.org Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
2021-01-21 13:19:53 +00:00
if (err)
return err;
err = user_path_at(dfd, path, kattr.lookup_flags, &target);
if (!err) {
err = do_mount_setattr(&target, &kattr);
path_put(&target);
}
fs: introduce MOUNT_ATTR_IDMAP Introduce a new mount bind mount property to allow idmapping mounts. The MOUNT_ATTR_IDMAP flag can be set via the new mount_setattr() syscall together with a file descriptor referring to a user namespace. The user namespace referenced by the namespace file descriptor will be attached to the bind mount. All interactions with the filesystem going through that mount will be mapped according to the mapping specified in the user namespace attached to it. Using user namespaces to mark mounts means we can reuse all the existing infrastructure in the kernel that already exists to handle idmappings and can also use this for permission checking to allow unprivileged user to create idmapped mounts in the future. Idmapping a mount is decoupled from the caller's user and mount namespace. This means idmapped mounts can be created in the initial user namespace which is an important use-case for systemd-homed, portable usb-sticks between systems, sharing data between the initial user namespace and unprivileged containers, and other use-cases that have been brought up. For example, assume a home directory where all files are owned by uid and gid 1000 and the home directory is brought to a new laptop where the user has id 12345. The system administrator can simply create a mount of this home directory with a mapping of 1000:12345:1 and other mappings to indicate the ids should be kept. (With this it is e.g. also possible to create idmapped mounts on the host with an identity mapping 1:1:100000 where the root user is not mapped. A user with root access that e.g. has been pivot rooted into such a mount on the host will be not be able to execute, read, write, or create files as root.) Given that mapping a mount is decoupled from the caller's user namespace a sufficiently privileged process such as a container manager can set up an idmapped mount for the container and the container can simply pivot root to it. There's no need for the container to do anything. The mount will appear correctly mapped independent of the user namespace the container uses. This means we don't need to mark a mount as idmappable. In order to create an idmapped mount the caller must currently be privileged in the user namespace of the superblock the mount belongs to. Once a mount has been idmapped we don't allow it to change its mapping. This keeps permission checking and life-cycle management simple. Users wanting to change the idmapped can always create a new detached mount with a different idmapping. Link: https://lore.kernel.org/r/20210121131959.646623-36-christian.brauner@ubuntu.com Cc: Christoph Hellwig <hch@lst.de> Cc: David Howells <dhowells@redhat.com> Cc: Mauricio Vásquez Bernal <mauricio@kinvolk.io> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: linux-fsdevel@vger.kernel.org Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
2021-01-21 13:19:54 +00:00
finish_mount_kattr(&kattr);
fs: add mount_setattr() This implements the missing mount_setattr() syscall. While the new mount api allows to change the properties of a superblock there is currently no way to change the properties of a mount or a mount tree using file descriptors which the new mount api is based on. In addition the old mount api has the restriction that mount options cannot be applied recursively. This hasn't changed since changing mount options on a per-mount basis was implemented in [1] and has been a frequent request not just for convenience but also for security reasons. The legacy mount syscall is unable to accommodate this behavior without introducing a whole new set of flags because MS_REC | MS_REMOUNT | MS_BIND | MS_RDONLY | MS_NOEXEC | [...] only apply the mount option to the topmost mount. Changing MS_REC to apply to the whole mount tree would mean introducing a significant uapi change and would likely cause significant regressions. The new mount_setattr() syscall allows to recursively clear and set mount options in one shot. Multiple calls to change mount options requesting the same changes are idempotent: int mount_setattr(int dfd, const char *path, unsigned flags, struct mount_attr *uattr, size_t usize); Flags to modify path resolution behavior are specified in the @flags argument. Currently, AT_EMPTY_PATH, AT_RECURSIVE, AT_SYMLINK_NOFOLLOW, and AT_NO_AUTOMOUNT are supported. If useful, additional lookup flags to restrict path resolution as introduced with openat2() might be supported in the future. The mount_setattr() syscall can be expected to grow over time and is designed with extensibility in mind. It follows the extensible syscall pattern we have used with other syscalls such as openat2(), clone3(), sched_{set,get}attr(), and others. The set of mount options is passed in the uapi struct mount_attr which currently has the following layout: struct mount_attr { __u64 attr_set; __u64 attr_clr; __u64 propagation; __u64 userns_fd; }; The @attr_set and @attr_clr members are used to clear and set mount options. This way a user can e.g. request that a set of flags is to be raised such as turning mounts readonly by raising MOUNT_ATTR_RDONLY in @attr_set while at the same time requesting that another set of flags is to be lowered such as removing noexec from a mount tree by specifying MOUNT_ATTR_NOEXEC in @attr_clr. Note, since the MOUNT_ATTR_<atime> values are an enum starting from 0, not a bitmap, users wanting to transition to a different atime setting cannot simply specify the atime setting in @attr_set, but must also specify MOUNT_ATTR__ATIME in the @attr_clr field. So we ensure that MOUNT_ATTR__ATIME can't be partially set in @attr_clr and that @attr_set can't have any atime bits set if MOUNT_ATTR__ATIME isn't set in @attr_clr. The @propagation field lets callers specify the propagation type of a mount tree. Propagation is a single property that has four different settings and as such is not really a flag argument but an enum. Specifically, it would be unclear what setting and clearing propagation settings in combination would amount to. The legacy mount() syscall thus forbids the combination of multiple propagation settings too. The goal is to keep the semantics of mount propagation somewhat simple as they are overly complex as it is. The @userns_fd field lets user specify a user namespace whose idmapping becomes the idmapping of the mount. This is implemented and explained in detail in the next patch. [1]: commit 2e4b7fcd9260 ("[PATCH] r/o bind mounts: honor mount writer counts at remount") Link: https://lore.kernel.org/r/20210121131959.646623-35-christian.brauner@ubuntu.com Cc: David Howells <dhowells@redhat.com> Cc: Aleksa Sarai <cyphar@cyphar.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: linux-fsdevel@vger.kernel.org Cc: linux-api@vger.kernel.org Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
2021-01-21 13:19:53 +00:00
return err;
}
int show_path(struct seq_file *m, struct dentry *root)
{
if (root->d_sb->s_op->show_path)
return root->d_sb->s_op->show_path(m, root);
seq_dentry(m, root, " \t\n\\");
return 0;
}
static struct vfsmount *lookup_mnt_in_ns(u64 id, struct mnt_namespace *ns)
{
struct mount *mnt = mnt_find_id_at(ns, id);
if (!mnt || mnt->mnt_id_unique != id)
return NULL;
return &mnt->mnt;
}
struct kstatmount {
struct statmount __user *buf;
size_t bufsize;
struct vfsmount *mnt;
u64 mask;
struct path root;
struct statmount sm;
struct seq_file seq;
};
static u64 mnt_to_attr_flags(struct vfsmount *mnt)
{
unsigned int mnt_flags = READ_ONCE(mnt->mnt_flags);
u64 attr_flags = 0;
if (mnt_flags & MNT_READONLY)
attr_flags |= MOUNT_ATTR_RDONLY;
if (mnt_flags & MNT_NOSUID)
attr_flags |= MOUNT_ATTR_NOSUID;
if (mnt_flags & MNT_NODEV)
attr_flags |= MOUNT_ATTR_NODEV;
if (mnt_flags & MNT_NOEXEC)
attr_flags |= MOUNT_ATTR_NOEXEC;
if (mnt_flags & MNT_NODIRATIME)
attr_flags |= MOUNT_ATTR_NODIRATIME;
if (mnt_flags & MNT_NOSYMFOLLOW)
attr_flags |= MOUNT_ATTR_NOSYMFOLLOW;
if (mnt_flags & MNT_NOATIME)
attr_flags |= MOUNT_ATTR_NOATIME;
else if (mnt_flags & MNT_RELATIME)
attr_flags |= MOUNT_ATTR_RELATIME;
else
attr_flags |= MOUNT_ATTR_STRICTATIME;
if (is_idmapped_mnt(mnt))
attr_flags |= MOUNT_ATTR_IDMAP;
return attr_flags;
}
static u64 mnt_to_propagation_flags(struct mount *m)
{
u64 propagation = 0;
if (IS_MNT_SHARED(m))
propagation |= MS_SHARED;
if (IS_MNT_SLAVE(m))
propagation |= MS_SLAVE;
if (IS_MNT_UNBINDABLE(m))
propagation |= MS_UNBINDABLE;
if (!propagation)
propagation |= MS_PRIVATE;
return propagation;
}
static void statmount_sb_basic(struct kstatmount *s)
{
struct super_block *sb = s->mnt->mnt_sb;
s->sm.mask |= STATMOUNT_SB_BASIC;
s->sm.sb_dev_major = MAJOR(sb->s_dev);
s->sm.sb_dev_minor = MINOR(sb->s_dev);
s->sm.sb_magic = sb->s_magic;
s->sm.sb_flags = sb->s_flags & (SB_RDONLY|SB_SYNCHRONOUS|SB_DIRSYNC|SB_LAZYTIME);
}
static void statmount_mnt_basic(struct kstatmount *s)
{
struct mount *m = real_mount(s->mnt);
s->sm.mask |= STATMOUNT_MNT_BASIC;
s->sm.mnt_id = m->mnt_id_unique;
s->sm.mnt_parent_id = m->mnt_parent->mnt_id_unique;
s->sm.mnt_id_old = m->mnt_id;
s->sm.mnt_parent_id_old = m->mnt_parent->mnt_id;
s->sm.mnt_attr = mnt_to_attr_flags(&m->mnt);
s->sm.mnt_propagation = mnt_to_propagation_flags(m);
s->sm.mnt_peer_group = IS_MNT_SHARED(m) ? m->mnt_group_id : 0;
s->sm.mnt_master = IS_MNT_SLAVE(m) ? m->mnt_master->mnt_group_id : 0;
}
static void statmount_propagate_from(struct kstatmount *s)
{
struct mount *m = real_mount(s->mnt);
s->sm.mask |= STATMOUNT_PROPAGATE_FROM;
if (IS_MNT_SLAVE(m))
s->sm.propagate_from = get_dominating_id(m, &current->fs->root);
}
static int statmount_mnt_root(struct kstatmount *s, struct seq_file *seq)
{
int ret;
size_t start = seq->count;
ret = show_path(seq, s->mnt->mnt_root);
if (ret)
return ret;
if (unlikely(seq_has_overflowed(seq)))
return -EAGAIN;
/*
* Unescape the result. It would be better if supplied string was not
* escaped in the first place, but that's a pretty invasive change.
*/
seq->buf[seq->count] = '\0';
seq->count = start;
seq_commit(seq, string_unescape_inplace(seq->buf + start, UNESCAPE_OCTAL));
return 0;
}
static int statmount_mnt_point(struct kstatmount *s, struct seq_file *seq)
{
struct vfsmount *mnt = s->mnt;
struct path mnt_path = { .dentry = mnt->mnt_root, .mnt = mnt };
int err;
err = seq_path_root(seq, &mnt_path, &s->root, "");
return err == SEQ_SKIP ? 0 : err;
}
static int statmount_fs_type(struct kstatmount *s, struct seq_file *seq)
{
struct super_block *sb = s->mnt->mnt_sb;
seq_puts(seq, sb->s_type->name);
return 0;
}
static void statmount_mnt_ns_id(struct kstatmount *s, struct mnt_namespace *ns)
{
s->sm.mask |= STATMOUNT_MNT_NS_ID;
s->sm.mnt_ns_id = ns->seq;
}
static int statmount_mnt_opts(struct kstatmount *s, struct seq_file *seq)
{
struct vfsmount *mnt = s->mnt;
struct super_block *sb = mnt->mnt_sb;
int err;
if (sb->s_op->show_options) {
size_t start = seq->count;
err = sb->s_op->show_options(seq, mnt->mnt_root);
if (err)
return err;
if (unlikely(seq_has_overflowed(seq)))
return -EAGAIN;
if (seq->count == start)
return 0;
/* skip leading comma */
memmove(seq->buf + start, seq->buf + start + 1,
seq->count - start - 1);
seq->count--;
}
return 0;
}
static int statmount_string(struct kstatmount *s, u64 flag)
{
int ret;
size_t kbufsize;
struct seq_file *seq = &s->seq;
struct statmount *sm = &s->sm;
switch (flag) {
case STATMOUNT_FS_TYPE:
sm->fs_type = seq->count;
ret = statmount_fs_type(s, seq);
break;
case STATMOUNT_MNT_ROOT:
sm->mnt_root = seq->count;
ret = statmount_mnt_root(s, seq);
break;
case STATMOUNT_MNT_POINT:
sm->mnt_point = seq->count;
ret = statmount_mnt_point(s, seq);
break;
case STATMOUNT_MNT_OPTS:
sm->mnt_opts = seq->count;
ret = statmount_mnt_opts(s, seq);
break;
default:
WARN_ON_ONCE(true);
return -EINVAL;
}
if (unlikely(check_add_overflow(sizeof(*sm), seq->count, &kbufsize)))
return -EOVERFLOW;
if (kbufsize >= s->bufsize)
return -EOVERFLOW;
/* signal a retry */
if (unlikely(seq_has_overflowed(seq)))
return -EAGAIN;
if (ret)
return ret;
seq->buf[seq->count++] = '\0';
sm->mask |= flag;
return 0;
}
static int copy_statmount_to_user(struct kstatmount *s)
{
struct statmount *sm = &s->sm;
struct seq_file *seq = &s->seq;
char __user *str = ((char __user *)s->buf) + sizeof(*sm);
size_t copysize = min_t(size_t, s->bufsize, sizeof(*sm));
if (seq->count && copy_to_user(str, seq->buf, seq->count))
return -EFAULT;
/* Return the number of bytes copied to the buffer */
sm->size = copysize + seq->count;
if (copy_to_user(s->buf, sm, copysize))
return -EFAULT;
return 0;
}
static struct mount *listmnt_next(struct mount *curr, bool reverse)
{
struct rb_node *node;
if (reverse)
node = rb_prev(&curr->mnt_node);
else
node = rb_next(&curr->mnt_node);
return node_to_mount(node);
}
static int grab_requested_root(struct mnt_namespace *ns, struct path *root)
{
fs: find rootfs mount of the mount namespace The method we used was predicated on the assumption that the mount immediately following the root mount of the mount namespace would be the rootfs mount of the namespace. That's not always the case though. For example: ID PARENT ID 408 412 0:60 /containers/overlay-containers/bc391117192b32071b22ef2083ebe7735d5c390f87a5779e02faf79ba0746ceb/userdata/hosts /etc/hosts rw,nosuid,nodev,relatime - tmpfs tmpfs rw,size=954664k,nr_inodes=238666,mode=700,uid=1000,gid=1000,inode64 409 414 0:61 / /dev/shm rw,nosuid,nodev,noexec,relatime - tmpfs shm rw,size=64000k,uid=1000,gid=1000,inode64 410 412 0:60 /containers/overlay-containers/bc391117192b32071b22ef2083ebe7735d5c390f87a5779e02faf79ba0746ceb/userdata/.containerenv /run/.containerenv rw,nosuid,nodev,relatime - tmpfs tmpfs rw,size=954664k,nr_inodes=238666,mode=700,uid=1000,gid=1000,inode64 411 412 0:60 /containers/overlay-containers/bc391117192b32071b22ef2083ebe7735d5c390f87a5779e02faf79ba0746ceb/userdata/hostname /etc/hostname rw,nosuid,nodev,relatime - tmpfs tmpfs rw,size=954664k,nr_inodes=238666,mode=700,uid=1000,gid=1000,inode64 412 363 0:65 / / rw,relatime - overlay overlay rw,lowerdir=/home/user1/.local/share/containers/storage/overlay/l/JS65SUCGTPCP2EEBHLRP4UCFI5:/home/user1/.local/share/containers/storage/overlay/l/DLW22KVDWUNI4242D6SDJ5GKCL [...] 413 412 0:68 / /proc rw,nosuid,nodev,noexec,relatime - proc proc rw 414 412 0:69 / /dev rw,nosuid - tmpfs tmpfs rw,size=65536k,mode=755,uid=1000,gid=1000,inode64 415 412 0:70 / /sys ro,nosuid,nodev,noexec,relatime - sysfs sysfs rw 416 414 0:71 / /dev/pts rw,nosuid,noexec,relatime - devpts devpts rw,gid=100004,mode=620,ptmxmode=666 417 414 0:67 / /dev/mqueue rw,nosuid,nodev,noexec,relatime - mqueue mqueue rw 418 415 0:27 / /sys/fs/cgroup ro,nosuid,nodev,noexec,relatime - cgroup2 cgroup2 rw,nsdelegate,memory_recursiveprot 419 414 0:6 /null /dev/null rw,nosuid,noexec - devtmpfs devtmpfs rw,size=4096k,nr_inodes=1179282,mode=755,inode64 420 414 0:6 /zero /dev/zero rw,nosuid,noexec - devtmpfs devtmpfs rw,size=4096k,nr_inodes=1179282,mode=755,inode64 422 414 0:6 /full /dev/full rw,nosuid,noexec - devtmpfs devtmpfs rw,size=4096k,nr_inodes=1179282,mode=755,inode64 423 414 0:6 /tty /dev/tty rw,nosuid,noexec - devtmpfs devtmpfs rw,size=4096k,nr_inodes=1179282,mode=755,inode64 430 414 0:6 /random /dev/random rw,nosuid,noexec - devtmpfs devtmpfs rw,size=4096k,nr_inodes=1179282,mode=755,inode64 431 414 0:6 /urandom /dev/urandom rw,nosuid,noexec - devtmpfs devtmpfs rw,size=4096k,nr_inodes=1179282,mode=755,inode64 433 413 0:72 / /proc/acpi ro,relatime - tmpfs tmpfs rw,size=0k,uid=1000,gid=1000,inode64 440 413 0:6 /null /proc/kcore ro,nosuid - devtmpfs devtmpfs rw,size=4096k,nr_inodes=1179282,mode=755,inode64 441 413 0:6 /null /proc/keys ro,nosuid - devtmpfs devtmpfs rw,size=4096k,nr_inodes=1179282,mode=755,inode64 442 413 0:6 /null /proc/timer_list ro,nosuid - devtmpfs devtmpfs rw,size=4096k,nr_inodes=1179282,mode=755,inode64 443 413 0:73 / /proc/scsi ro,relatime - tmpfs tmpfs rw,size=0k,uid=1000,gid=1000,inode64 444 415 0:74 / /sys/firmware ro,relatime - tmpfs tmpfs rw,size=0k,uid=1000,gid=1000,inode64 445 415 0:75 / /sys/dev/block ro,relatime - tmpfs tmpfs rw,size=0k,uid=1000,gid=1000,inode64 446 413 0:68 /bus /proc/bus ro,nosuid,nodev,noexec,relatime - proc proc rw 447 413 0:68 /fs /proc/fs ro,nosuid,nodev,noexec,relatime - proc proc rw 448 413 0:68 /irq /proc/irq ro,nosuid,nodev,noexec,relatime - proc proc rw 449 413 0:68 /sys /proc/sys ro,nosuid,nodev,noexec,relatime - proc proc rw 450 413 0:68 /sysrq-trigger /proc/sysrq-trigger ro,nosuid,nodev,noexec,relatime - proc proc rw 364 414 0:71 /0 /dev/console rw,relatime - devpts devpts rw,gid=100004,mode=620,ptmxmode=666 In this mount table the root mount of the mount namespace is the mount with id 363 (It isn't visible because it's literally just what the rootfs mount is mounted upon and usually it's just a copy of the real rootfs). The rootfs mount that's mounted on the root mount of the mount namespace is the mount with id 412. But the mount namespace contains mounts that were created before the rootfs mount and thus have earlier mount ids. So the first call to listmnt_next() would return the mount with the mount id 408 and not the rootfs mount. So we need to find the actual rootfs mount mounted on the root mount of the mount namespace. This logic is also present in mntns_install() where vfs_path_lookup() is used. We can't use this though as we're holding the namespace semaphore. We could look at the children of the root mount of the mount namespace directly but that also seems a bit out of place while we have the rbtree. So let's just iterate through the rbtree starting from the root mount of the mount namespace and find the mount whose parent is the root mount of the mount namespace. That mount will usually appear very early in the rbtree and afaik there can only be one. IOW, it would be very strange if we ended up with a root mount of a mount namespace that has shadow mounts. Fixes: 0a3deb11858a ("fs: Allow listmount() in foreign mount namespace") # mainline only Signed-off-by: Christian Brauner <brauner@kernel.org>
2024-07-05 11:08:54 +00:00
struct mount *first, *child;
rwsem_assert_held(&namespace_sem);
/* We're looking at our own ns, just use get_fs_root. */
if (ns == current->nsproxy->mnt_ns) {
get_fs_root(current->fs, root);
return 0;
}
/*
* We have to find the first mount in our ns and use that, however it
* may not exist, so handle that properly.
*/
if (RB_EMPTY_ROOT(&ns->mounts))
return -ENOENT;
fs: find rootfs mount of the mount namespace The method we used was predicated on the assumption that the mount immediately following the root mount of the mount namespace would be the rootfs mount of the namespace. That's not always the case though. For example: ID PARENT ID 408 412 0:60 /containers/overlay-containers/bc391117192b32071b22ef2083ebe7735d5c390f87a5779e02faf79ba0746ceb/userdata/hosts /etc/hosts rw,nosuid,nodev,relatime - tmpfs tmpfs rw,size=954664k,nr_inodes=238666,mode=700,uid=1000,gid=1000,inode64 409 414 0:61 / /dev/shm rw,nosuid,nodev,noexec,relatime - tmpfs shm rw,size=64000k,uid=1000,gid=1000,inode64 410 412 0:60 /containers/overlay-containers/bc391117192b32071b22ef2083ebe7735d5c390f87a5779e02faf79ba0746ceb/userdata/.containerenv /run/.containerenv rw,nosuid,nodev,relatime - tmpfs tmpfs rw,size=954664k,nr_inodes=238666,mode=700,uid=1000,gid=1000,inode64 411 412 0:60 /containers/overlay-containers/bc391117192b32071b22ef2083ebe7735d5c390f87a5779e02faf79ba0746ceb/userdata/hostname /etc/hostname rw,nosuid,nodev,relatime - tmpfs tmpfs rw,size=954664k,nr_inodes=238666,mode=700,uid=1000,gid=1000,inode64 412 363 0:65 / / rw,relatime - overlay overlay rw,lowerdir=/home/user1/.local/share/containers/storage/overlay/l/JS65SUCGTPCP2EEBHLRP4UCFI5:/home/user1/.local/share/containers/storage/overlay/l/DLW22KVDWUNI4242D6SDJ5GKCL [...] 413 412 0:68 / /proc rw,nosuid,nodev,noexec,relatime - proc proc rw 414 412 0:69 / /dev rw,nosuid - tmpfs tmpfs rw,size=65536k,mode=755,uid=1000,gid=1000,inode64 415 412 0:70 / /sys ro,nosuid,nodev,noexec,relatime - sysfs sysfs rw 416 414 0:71 / /dev/pts rw,nosuid,noexec,relatime - devpts devpts rw,gid=100004,mode=620,ptmxmode=666 417 414 0:67 / /dev/mqueue rw,nosuid,nodev,noexec,relatime - mqueue mqueue rw 418 415 0:27 / /sys/fs/cgroup ro,nosuid,nodev,noexec,relatime - cgroup2 cgroup2 rw,nsdelegate,memory_recursiveprot 419 414 0:6 /null /dev/null rw,nosuid,noexec - devtmpfs devtmpfs rw,size=4096k,nr_inodes=1179282,mode=755,inode64 420 414 0:6 /zero /dev/zero rw,nosuid,noexec - devtmpfs devtmpfs rw,size=4096k,nr_inodes=1179282,mode=755,inode64 422 414 0:6 /full /dev/full rw,nosuid,noexec - devtmpfs devtmpfs rw,size=4096k,nr_inodes=1179282,mode=755,inode64 423 414 0:6 /tty /dev/tty rw,nosuid,noexec - devtmpfs devtmpfs rw,size=4096k,nr_inodes=1179282,mode=755,inode64 430 414 0:6 /random /dev/random rw,nosuid,noexec - devtmpfs devtmpfs rw,size=4096k,nr_inodes=1179282,mode=755,inode64 431 414 0:6 /urandom /dev/urandom rw,nosuid,noexec - devtmpfs devtmpfs rw,size=4096k,nr_inodes=1179282,mode=755,inode64 433 413 0:72 / /proc/acpi ro,relatime - tmpfs tmpfs rw,size=0k,uid=1000,gid=1000,inode64 440 413 0:6 /null /proc/kcore ro,nosuid - devtmpfs devtmpfs rw,size=4096k,nr_inodes=1179282,mode=755,inode64 441 413 0:6 /null /proc/keys ro,nosuid - devtmpfs devtmpfs rw,size=4096k,nr_inodes=1179282,mode=755,inode64 442 413 0:6 /null /proc/timer_list ro,nosuid - devtmpfs devtmpfs rw,size=4096k,nr_inodes=1179282,mode=755,inode64 443 413 0:73 / /proc/scsi ro,relatime - tmpfs tmpfs rw,size=0k,uid=1000,gid=1000,inode64 444 415 0:74 / /sys/firmware ro,relatime - tmpfs tmpfs rw,size=0k,uid=1000,gid=1000,inode64 445 415 0:75 / /sys/dev/block ro,relatime - tmpfs tmpfs rw,size=0k,uid=1000,gid=1000,inode64 446 413 0:68 /bus /proc/bus ro,nosuid,nodev,noexec,relatime - proc proc rw 447 413 0:68 /fs /proc/fs ro,nosuid,nodev,noexec,relatime - proc proc rw 448 413 0:68 /irq /proc/irq ro,nosuid,nodev,noexec,relatime - proc proc rw 449 413 0:68 /sys /proc/sys ro,nosuid,nodev,noexec,relatime - proc proc rw 450 413 0:68 /sysrq-trigger /proc/sysrq-trigger ro,nosuid,nodev,noexec,relatime - proc proc rw 364 414 0:71 /0 /dev/console rw,relatime - devpts devpts rw,gid=100004,mode=620,ptmxmode=666 In this mount table the root mount of the mount namespace is the mount with id 363 (It isn't visible because it's literally just what the rootfs mount is mounted upon and usually it's just a copy of the real rootfs). The rootfs mount that's mounted on the root mount of the mount namespace is the mount with id 412. But the mount namespace contains mounts that were created before the rootfs mount and thus have earlier mount ids. So the first call to listmnt_next() would return the mount with the mount id 408 and not the rootfs mount. So we need to find the actual rootfs mount mounted on the root mount of the mount namespace. This logic is also present in mntns_install() where vfs_path_lookup() is used. We can't use this though as we're holding the namespace semaphore. We could look at the children of the root mount of the mount namespace directly but that also seems a bit out of place while we have the rbtree. So let's just iterate through the rbtree starting from the root mount of the mount namespace and find the mount whose parent is the root mount of the mount namespace. That mount will usually appear very early in the rbtree and afaik there can only be one. IOW, it would be very strange if we ended up with a root mount of a mount namespace that has shadow mounts. Fixes: 0a3deb11858a ("fs: Allow listmount() in foreign mount namespace") # mainline only Signed-off-by: Christian Brauner <brauner@kernel.org>
2024-07-05 11:08:54 +00:00
first = child = ns->root;
for (;;) {
child = listmnt_next(child, false);
if (!child)
return -ENOENT;
if (child->mnt_parent == first)
break;
}
root->mnt = mntget(&child->mnt);
root->dentry = dget(root->mnt->mnt_root);
return 0;
}
static int do_statmount(struct kstatmount *s, u64 mnt_id, u64 mnt_ns_id,
struct mnt_namespace *ns)
{
struct path root __free(path_put) = {};
struct mount *m;
int err;
/* Has the namespace already been emptied? */
if (mnt_ns_id && RB_EMPTY_ROOT(&ns->mounts))
return -ENOENT;
s->mnt = lookup_mnt_in_ns(mnt_id, ns);
if (!s->mnt)
return -ENOENT;
err = grab_requested_root(ns, &root);
if (err)
return err;
/*
* Don't trigger audit denials. We just want to determine what
* mounts to show users.
*/
m = real_mount(s->mnt);
if (!is_path_reachable(m, m->mnt.mnt_root, &root) &&
!ns_capable_noaudit(ns->user_ns, CAP_SYS_ADMIN))
return -EPERM;
err = security_sb_statfs(s->mnt->mnt_root);
if (err)
return err;
s->root = root;
if (s->mask & STATMOUNT_SB_BASIC)
statmount_sb_basic(s);
if (s->mask & STATMOUNT_MNT_BASIC)
statmount_mnt_basic(s);
if (s->mask & STATMOUNT_PROPAGATE_FROM)
statmount_propagate_from(s);
if (s->mask & STATMOUNT_FS_TYPE)
err = statmount_string(s, STATMOUNT_FS_TYPE);
if (!err && s->mask & STATMOUNT_MNT_ROOT)
err = statmount_string(s, STATMOUNT_MNT_ROOT);
if (!err && s->mask & STATMOUNT_MNT_POINT)
err = statmount_string(s, STATMOUNT_MNT_POINT);
if (!err && s->mask & STATMOUNT_MNT_OPTS)
err = statmount_string(s, STATMOUNT_MNT_OPTS);
if (!err && s->mask & STATMOUNT_MNT_NS_ID)
statmount_mnt_ns_id(s, ns);
if (err)
return err;
return 0;
}
static inline bool retry_statmount(const long ret, size_t *seq_size)
{
if (likely(ret != -EAGAIN))
return false;
if (unlikely(check_mul_overflow(*seq_size, 2, seq_size)))
return false;
if (unlikely(*seq_size > MAX_RW_COUNT))
return false;
return true;
}
#define STATMOUNT_STRING_REQ (STATMOUNT_MNT_ROOT | STATMOUNT_MNT_POINT | \
STATMOUNT_FS_TYPE | STATMOUNT_MNT_OPTS)
static int prepare_kstatmount(struct kstatmount *ks, struct mnt_id_req *kreq,
struct statmount __user *buf, size_t bufsize,
size_t seq_size)
{
if (!access_ok(buf, bufsize))
return -EFAULT;
memset(ks, 0, sizeof(*ks));
add listmount(2) syscall Add way to query the children of a particular mount. This is a more flexible way to iterate the mount tree than having to parse /proc/self/mountinfo. Lookup the mount by the new 64bit mount ID. If a mount needs to be queried based on path, then statx(2) can be used to first query the mount ID belonging to the path. Return an array of new (64bit) mount ID's. Without privileges only mounts are listed which are reachable from the task's root. Folded into this patch are several later improvements. Keeping them separate would make the history pointlessly confusing: * Recursive listing of mounts is the default now (cf. [1]). * Remove explicit LISTMOUNT_UNREACHABLE flag (cf. [1]) and fail if mount is unreachable from current root. This also makes permission checking consistent with statmount() (cf. [3]). * Start listing mounts in unique mount ID order (cf. [2]) to allow continuing listmount() from a midpoint. * Allow to continue listmount(). The @request_mask parameter is renamed and to @param to be usable by both statmount() and listmount(). If @param is set to a mount id then listmount() will continue listing mounts from that id on. This allows listing mounts in multiple listmount invocations without having to resize the buffer. If @param is zero then the listing starts from the beginning (cf. [4]). * Don't return EOVERFLOW, instead return the buffer size which allows to detect a full buffer as well (cf. [4]). Signed-off-by: Miklos Szeredi <mszeredi@redhat.com> Link: https://lore.kernel.org/r/20231025140205.3586473-6-mszeredi@redhat.com Reviewed-by: Ian Kent <raven@themaw.net> Link: https://lore.kernel.org/r/20231128160337.29094-2-mszeredi@redhat.com [1] (folded) Link: https://lore.kernel.org/r/20231128160337.29094-3-mszeredi@redhat.com [2] (folded) Link: https://lore.kernel.org/r/20231128160337.29094-4-mszeredi@redhat.com [3] (folded) Link: https://lore.kernel.org/r/20231128160337.29094-5-mszeredi@redhat.com [4] (folded) [Christian Brauner <brauner@kernel.org>: various smaller fixes] Signed-off-by: Christian Brauner <brauner@kernel.org>
2023-10-25 14:02:03 +00:00
ks->mask = kreq->param;
ks->buf = buf;
ks->bufsize = bufsize;
if (ks->mask & STATMOUNT_STRING_REQ) {
if (bufsize == sizeof(ks->sm))
return -EOVERFLOW;
ks->seq.buf = kvmalloc(seq_size, GFP_KERNEL_ACCOUNT);
if (!ks->seq.buf)
return -ENOMEM;
ks->seq.size = seq_size;
}
return 0;
}
static int copy_mnt_id_req(const struct mnt_id_req __user *req,
struct mnt_id_req *kreq)
{
int ret;
size_t usize;
BUILD_BUG_ON(sizeof(struct mnt_id_req) != MNT_ID_REQ_SIZE_VER1);
ret = get_user(usize, &req->size);
if (ret)
return -EFAULT;
if (unlikely(usize > PAGE_SIZE))
return -E2BIG;
if (unlikely(usize < MNT_ID_REQ_SIZE_VER0))
return -EINVAL;
memset(kreq, 0, sizeof(*kreq));
ret = copy_struct_from_user(kreq, sizeof(*kreq), req, usize);
if (ret)
return ret;
if (kreq->spare != 0)
return -EINVAL;
/* The first valid unique mount id is MNT_UNIQUE_ID_OFFSET + 1. */
if (kreq->mnt_id <= MNT_UNIQUE_ID_OFFSET)
return -EINVAL;
return 0;
}
/*
* If the user requested a specific mount namespace id, look that up and return
* that, or if not simply grab a passive reference on our mount namespace and
* return that.
*/
static struct mnt_namespace *grab_requested_mnt_ns(const struct mnt_id_req *kreq)
{
struct mnt_namespace *mnt_ns;
if (kreq->mnt_ns_id && kreq->spare)
return ERR_PTR(-EINVAL);
if (kreq->mnt_ns_id)
return lookup_mnt_ns(kreq->mnt_ns_id);
if (kreq->spare) {
struct ns_common *ns;
CLASS(fd, f)(kreq->spare);
if (fd_empty(f))
return ERR_PTR(-EBADF);
if (!proc_ns_file(fd_file(f)))
return ERR_PTR(-EINVAL);
ns = get_proc_ns(file_inode(fd_file(f)));
if (ns->ops->type != CLONE_NEWNS)
return ERR_PTR(-EINVAL);
mnt_ns = to_mnt_ns(ns);
} else {
mnt_ns = current->nsproxy->mnt_ns;
}
refcount_inc(&mnt_ns->passive);
return mnt_ns;
}
SYSCALL_DEFINE4(statmount, const struct mnt_id_req __user *, req,
struct statmount __user *, buf, size_t, bufsize,
unsigned int, flags)
{
struct mnt_namespace *ns __free(mnt_ns_release) = NULL;
struct kstatmount *ks __free(kfree) = NULL;
struct mnt_id_req kreq;
/* We currently support retrieval of 3 strings. */
size_t seq_size = 3 * PATH_MAX;
int ret;
if (flags)
return -EINVAL;
ret = copy_mnt_id_req(req, &kreq);
if (ret)
return ret;
ns = grab_requested_mnt_ns(&kreq);
if (!ns)
return -ENOENT;
if (kreq.mnt_ns_id && (ns != current->nsproxy->mnt_ns) &&
!ns_capable_noaudit(ns->user_ns, CAP_SYS_ADMIN))
return -ENOENT;
ks = kmalloc(sizeof(*ks), GFP_KERNEL_ACCOUNT);
if (!ks)
return -ENOMEM;
retry:
ret = prepare_kstatmount(ks, &kreq, buf, bufsize, seq_size);
if (ret)
return ret;
scoped_guard(rwsem_read, &namespace_sem)
ret = do_statmount(ks, kreq.mnt_id, kreq.mnt_ns_id, ns);
if (!ret)
ret = copy_statmount_to_user(ks);
kvfree(ks->seq.buf);
if (retry_statmount(ret, &seq_size))
goto retry;
return ret;
}
static ssize_t do_listmount(struct mnt_namespace *ns, u64 mnt_parent_id,
u64 last_mnt_id, u64 *mnt_ids, size_t nr_mnt_ids,
bool reverse)
add listmount(2) syscall Add way to query the children of a particular mount. This is a more flexible way to iterate the mount tree than having to parse /proc/self/mountinfo. Lookup the mount by the new 64bit mount ID. If a mount needs to be queried based on path, then statx(2) can be used to first query the mount ID belonging to the path. Return an array of new (64bit) mount ID's. Without privileges only mounts are listed which are reachable from the task's root. Folded into this patch are several later improvements. Keeping them separate would make the history pointlessly confusing: * Recursive listing of mounts is the default now (cf. [1]). * Remove explicit LISTMOUNT_UNREACHABLE flag (cf. [1]) and fail if mount is unreachable from current root. This also makes permission checking consistent with statmount() (cf. [3]). * Start listing mounts in unique mount ID order (cf. [2]) to allow continuing listmount() from a midpoint. * Allow to continue listmount(). The @request_mask parameter is renamed and to @param to be usable by both statmount() and listmount(). If @param is set to a mount id then listmount() will continue listing mounts from that id on. This allows listing mounts in multiple listmount invocations without having to resize the buffer. If @param is zero then the listing starts from the beginning (cf. [4]). * Don't return EOVERFLOW, instead return the buffer size which allows to detect a full buffer as well (cf. [4]). Signed-off-by: Miklos Szeredi <mszeredi@redhat.com> Link: https://lore.kernel.org/r/20231025140205.3586473-6-mszeredi@redhat.com Reviewed-by: Ian Kent <raven@themaw.net> Link: https://lore.kernel.org/r/20231128160337.29094-2-mszeredi@redhat.com [1] (folded) Link: https://lore.kernel.org/r/20231128160337.29094-3-mszeredi@redhat.com [2] (folded) Link: https://lore.kernel.org/r/20231128160337.29094-4-mszeredi@redhat.com [3] (folded) Link: https://lore.kernel.org/r/20231128160337.29094-5-mszeredi@redhat.com [4] (folded) [Christian Brauner <brauner@kernel.org>: various smaller fixes] Signed-off-by: Christian Brauner <brauner@kernel.org>
2023-10-25 14:02:03 +00:00
{
struct path root __free(path_put) = {};
struct path orig;
struct mount *r, *first;
ssize_t ret;
add listmount(2) syscall Add way to query the children of a particular mount. This is a more flexible way to iterate the mount tree than having to parse /proc/self/mountinfo. Lookup the mount by the new 64bit mount ID. If a mount needs to be queried based on path, then statx(2) can be used to first query the mount ID belonging to the path. Return an array of new (64bit) mount ID's. Without privileges only mounts are listed which are reachable from the task's root. Folded into this patch are several later improvements. Keeping them separate would make the history pointlessly confusing: * Recursive listing of mounts is the default now (cf. [1]). * Remove explicit LISTMOUNT_UNREACHABLE flag (cf. [1]) and fail if mount is unreachable from current root. This also makes permission checking consistent with statmount() (cf. [3]). * Start listing mounts in unique mount ID order (cf. [2]) to allow continuing listmount() from a midpoint. * Allow to continue listmount(). The @request_mask parameter is renamed and to @param to be usable by both statmount() and listmount(). If @param is set to a mount id then listmount() will continue listing mounts from that id on. This allows listing mounts in multiple listmount invocations without having to resize the buffer. If @param is zero then the listing starts from the beginning (cf. [4]). * Don't return EOVERFLOW, instead return the buffer size which allows to detect a full buffer as well (cf. [4]). Signed-off-by: Miklos Szeredi <mszeredi@redhat.com> Link: https://lore.kernel.org/r/20231025140205.3586473-6-mszeredi@redhat.com Reviewed-by: Ian Kent <raven@themaw.net> Link: https://lore.kernel.org/r/20231128160337.29094-2-mszeredi@redhat.com [1] (folded) Link: https://lore.kernel.org/r/20231128160337.29094-3-mszeredi@redhat.com [2] (folded) Link: https://lore.kernel.org/r/20231128160337.29094-4-mszeredi@redhat.com [3] (folded) Link: https://lore.kernel.org/r/20231128160337.29094-5-mszeredi@redhat.com [4] (folded) [Christian Brauner <brauner@kernel.org>: various smaller fixes] Signed-off-by: Christian Brauner <brauner@kernel.org>
2023-10-25 14:02:03 +00:00
rwsem_assert_held(&namespace_sem);
ret = grab_requested_root(ns, &root);
if (ret)
return ret;
if (mnt_parent_id == LSMT_ROOT) {
orig = root;
} else {
orig.mnt = lookup_mnt_in_ns(mnt_parent_id, ns);
if (!orig.mnt)
return -ENOENT;
orig.dentry = orig.mnt->mnt_root;
}
add listmount(2) syscall Add way to query the children of a particular mount. This is a more flexible way to iterate the mount tree than having to parse /proc/self/mountinfo. Lookup the mount by the new 64bit mount ID. If a mount needs to be queried based on path, then statx(2) can be used to first query the mount ID belonging to the path. Return an array of new (64bit) mount ID's. Without privileges only mounts are listed which are reachable from the task's root. Folded into this patch are several later improvements. Keeping them separate would make the history pointlessly confusing: * Recursive listing of mounts is the default now (cf. [1]). * Remove explicit LISTMOUNT_UNREACHABLE flag (cf. [1]) and fail if mount is unreachable from current root. This also makes permission checking consistent with statmount() (cf. [3]). * Start listing mounts in unique mount ID order (cf. [2]) to allow continuing listmount() from a midpoint. * Allow to continue listmount(). The @request_mask parameter is renamed and to @param to be usable by both statmount() and listmount(). If @param is set to a mount id then listmount() will continue listing mounts from that id on. This allows listing mounts in multiple listmount invocations without having to resize the buffer. If @param is zero then the listing starts from the beginning (cf. [4]). * Don't return EOVERFLOW, instead return the buffer size which allows to detect a full buffer as well (cf. [4]). Signed-off-by: Miklos Szeredi <mszeredi@redhat.com> Link: https://lore.kernel.org/r/20231025140205.3586473-6-mszeredi@redhat.com Reviewed-by: Ian Kent <raven@themaw.net> Link: https://lore.kernel.org/r/20231128160337.29094-2-mszeredi@redhat.com [1] (folded) Link: https://lore.kernel.org/r/20231128160337.29094-3-mszeredi@redhat.com [2] (folded) Link: https://lore.kernel.org/r/20231128160337.29094-4-mszeredi@redhat.com [3] (folded) Link: https://lore.kernel.org/r/20231128160337.29094-5-mszeredi@redhat.com [4] (folded) [Christian Brauner <brauner@kernel.org>: various smaller fixes] Signed-off-by: Christian Brauner <brauner@kernel.org>
2023-10-25 14:02:03 +00:00
/*
* Don't trigger audit denials. We just want to determine what
* mounts to show users.
*/
if (!is_path_reachable(real_mount(orig.mnt), orig.dentry, &root) &&
!ns_capable_noaudit(ns->user_ns, CAP_SYS_ADMIN))
add listmount(2) syscall Add way to query the children of a particular mount. This is a more flexible way to iterate the mount tree than having to parse /proc/self/mountinfo. Lookup the mount by the new 64bit mount ID. If a mount needs to be queried based on path, then statx(2) can be used to first query the mount ID belonging to the path. Return an array of new (64bit) mount ID's. Without privileges only mounts are listed which are reachable from the task's root. Folded into this patch are several later improvements. Keeping them separate would make the history pointlessly confusing: * Recursive listing of mounts is the default now (cf. [1]). * Remove explicit LISTMOUNT_UNREACHABLE flag (cf. [1]) and fail if mount is unreachable from current root. This also makes permission checking consistent with statmount() (cf. [3]). * Start listing mounts in unique mount ID order (cf. [2]) to allow continuing listmount() from a midpoint. * Allow to continue listmount(). The @request_mask parameter is renamed and to @param to be usable by both statmount() and listmount(). If @param is set to a mount id then listmount() will continue listing mounts from that id on. This allows listing mounts in multiple listmount invocations without having to resize the buffer. If @param is zero then the listing starts from the beginning (cf. [4]). * Don't return EOVERFLOW, instead return the buffer size which allows to detect a full buffer as well (cf. [4]). Signed-off-by: Miklos Szeredi <mszeredi@redhat.com> Link: https://lore.kernel.org/r/20231025140205.3586473-6-mszeredi@redhat.com Reviewed-by: Ian Kent <raven@themaw.net> Link: https://lore.kernel.org/r/20231128160337.29094-2-mszeredi@redhat.com [1] (folded) Link: https://lore.kernel.org/r/20231128160337.29094-3-mszeredi@redhat.com [2] (folded) Link: https://lore.kernel.org/r/20231128160337.29094-4-mszeredi@redhat.com [3] (folded) Link: https://lore.kernel.org/r/20231128160337.29094-5-mszeredi@redhat.com [4] (folded) [Christian Brauner <brauner@kernel.org>: various smaller fixes] Signed-off-by: Christian Brauner <brauner@kernel.org>
2023-10-25 14:02:03 +00:00
return -EPERM;
ret = security_sb_statfs(orig.dentry);
if (ret)
return ret;
add listmount(2) syscall Add way to query the children of a particular mount. This is a more flexible way to iterate the mount tree than having to parse /proc/self/mountinfo. Lookup the mount by the new 64bit mount ID. If a mount needs to be queried based on path, then statx(2) can be used to first query the mount ID belonging to the path. Return an array of new (64bit) mount ID's. Without privileges only mounts are listed which are reachable from the task's root. Folded into this patch are several later improvements. Keeping them separate would make the history pointlessly confusing: * Recursive listing of mounts is the default now (cf. [1]). * Remove explicit LISTMOUNT_UNREACHABLE flag (cf. [1]) and fail if mount is unreachable from current root. This also makes permission checking consistent with statmount() (cf. [3]). * Start listing mounts in unique mount ID order (cf. [2]) to allow continuing listmount() from a midpoint. * Allow to continue listmount(). The @request_mask parameter is renamed and to @param to be usable by both statmount() and listmount(). If @param is set to a mount id then listmount() will continue listing mounts from that id on. This allows listing mounts in multiple listmount invocations without having to resize the buffer. If @param is zero then the listing starts from the beginning (cf. [4]). * Don't return EOVERFLOW, instead return the buffer size which allows to detect a full buffer as well (cf. [4]). Signed-off-by: Miklos Szeredi <mszeredi@redhat.com> Link: https://lore.kernel.org/r/20231025140205.3586473-6-mszeredi@redhat.com Reviewed-by: Ian Kent <raven@themaw.net> Link: https://lore.kernel.org/r/20231128160337.29094-2-mszeredi@redhat.com [1] (folded) Link: https://lore.kernel.org/r/20231128160337.29094-3-mszeredi@redhat.com [2] (folded) Link: https://lore.kernel.org/r/20231128160337.29094-4-mszeredi@redhat.com [3] (folded) Link: https://lore.kernel.org/r/20231128160337.29094-5-mszeredi@redhat.com [4] (folded) [Christian Brauner <brauner@kernel.org>: various smaller fixes] Signed-off-by: Christian Brauner <brauner@kernel.org>
2023-10-25 14:02:03 +00:00
if (!last_mnt_id) {
if (reverse)
first = node_to_mount(rb_last(&ns->mounts));
else
first = node_to_mount(rb_first(&ns->mounts));
} else {
if (reverse)
first = mnt_find_id_at_reverse(ns, last_mnt_id - 1);
else
first = mnt_find_id_at(ns, last_mnt_id + 1);
}
add listmount(2) syscall Add way to query the children of a particular mount. This is a more flexible way to iterate the mount tree than having to parse /proc/self/mountinfo. Lookup the mount by the new 64bit mount ID. If a mount needs to be queried based on path, then statx(2) can be used to first query the mount ID belonging to the path. Return an array of new (64bit) mount ID's. Without privileges only mounts are listed which are reachable from the task's root. Folded into this patch are several later improvements. Keeping them separate would make the history pointlessly confusing: * Recursive listing of mounts is the default now (cf. [1]). * Remove explicit LISTMOUNT_UNREACHABLE flag (cf. [1]) and fail if mount is unreachable from current root. This also makes permission checking consistent with statmount() (cf. [3]). * Start listing mounts in unique mount ID order (cf. [2]) to allow continuing listmount() from a midpoint. * Allow to continue listmount(). The @request_mask parameter is renamed and to @param to be usable by both statmount() and listmount(). If @param is set to a mount id then listmount() will continue listing mounts from that id on. This allows listing mounts in multiple listmount invocations without having to resize the buffer. If @param is zero then the listing starts from the beginning (cf. [4]). * Don't return EOVERFLOW, instead return the buffer size which allows to detect a full buffer as well (cf. [4]). Signed-off-by: Miklos Szeredi <mszeredi@redhat.com> Link: https://lore.kernel.org/r/20231025140205.3586473-6-mszeredi@redhat.com Reviewed-by: Ian Kent <raven@themaw.net> Link: https://lore.kernel.org/r/20231128160337.29094-2-mszeredi@redhat.com [1] (folded) Link: https://lore.kernel.org/r/20231128160337.29094-3-mszeredi@redhat.com [2] (folded) Link: https://lore.kernel.org/r/20231128160337.29094-4-mszeredi@redhat.com [3] (folded) Link: https://lore.kernel.org/r/20231128160337.29094-5-mszeredi@redhat.com [4] (folded) [Christian Brauner <brauner@kernel.org>: various smaller fixes] Signed-off-by: Christian Brauner <brauner@kernel.org>
2023-10-25 14:02:03 +00:00
for (ret = 0, r = first; r && nr_mnt_ids; r = listmnt_next(r, reverse)) {
if (r->mnt_id_unique == mnt_parent_id)
add listmount(2) syscall Add way to query the children of a particular mount. This is a more flexible way to iterate the mount tree than having to parse /proc/self/mountinfo. Lookup the mount by the new 64bit mount ID. If a mount needs to be queried based on path, then statx(2) can be used to first query the mount ID belonging to the path. Return an array of new (64bit) mount ID's. Without privileges only mounts are listed which are reachable from the task's root. Folded into this patch are several later improvements. Keeping them separate would make the history pointlessly confusing: * Recursive listing of mounts is the default now (cf. [1]). * Remove explicit LISTMOUNT_UNREACHABLE flag (cf. [1]) and fail if mount is unreachable from current root. This also makes permission checking consistent with statmount() (cf. [3]). * Start listing mounts in unique mount ID order (cf. [2]) to allow continuing listmount() from a midpoint. * Allow to continue listmount(). The @request_mask parameter is renamed and to @param to be usable by both statmount() and listmount(). If @param is set to a mount id then listmount() will continue listing mounts from that id on. This allows listing mounts in multiple listmount invocations without having to resize the buffer. If @param is zero then the listing starts from the beginning (cf. [4]). * Don't return EOVERFLOW, instead return the buffer size which allows to detect a full buffer as well (cf. [4]). Signed-off-by: Miklos Szeredi <mszeredi@redhat.com> Link: https://lore.kernel.org/r/20231025140205.3586473-6-mszeredi@redhat.com Reviewed-by: Ian Kent <raven@themaw.net> Link: https://lore.kernel.org/r/20231128160337.29094-2-mszeredi@redhat.com [1] (folded) Link: https://lore.kernel.org/r/20231128160337.29094-3-mszeredi@redhat.com [2] (folded) Link: https://lore.kernel.org/r/20231128160337.29094-4-mszeredi@redhat.com [3] (folded) Link: https://lore.kernel.org/r/20231128160337.29094-5-mszeredi@redhat.com [4] (folded) [Christian Brauner <brauner@kernel.org>: various smaller fixes] Signed-off-by: Christian Brauner <brauner@kernel.org>
2023-10-25 14:02:03 +00:00
continue;
if (!is_path_reachable(r, r->mnt.mnt_root, &orig))
add listmount(2) syscall Add way to query the children of a particular mount. This is a more flexible way to iterate the mount tree than having to parse /proc/self/mountinfo. Lookup the mount by the new 64bit mount ID. If a mount needs to be queried based on path, then statx(2) can be used to first query the mount ID belonging to the path. Return an array of new (64bit) mount ID's. Without privileges only mounts are listed which are reachable from the task's root. Folded into this patch are several later improvements. Keeping them separate would make the history pointlessly confusing: * Recursive listing of mounts is the default now (cf. [1]). * Remove explicit LISTMOUNT_UNREACHABLE flag (cf. [1]) and fail if mount is unreachable from current root. This also makes permission checking consistent with statmount() (cf. [3]). * Start listing mounts in unique mount ID order (cf. [2]) to allow continuing listmount() from a midpoint. * Allow to continue listmount(). The @request_mask parameter is renamed and to @param to be usable by both statmount() and listmount(). If @param is set to a mount id then listmount() will continue listing mounts from that id on. This allows listing mounts in multiple listmount invocations without having to resize the buffer. If @param is zero then the listing starts from the beginning (cf. [4]). * Don't return EOVERFLOW, instead return the buffer size which allows to detect a full buffer as well (cf. [4]). Signed-off-by: Miklos Szeredi <mszeredi@redhat.com> Link: https://lore.kernel.org/r/20231025140205.3586473-6-mszeredi@redhat.com Reviewed-by: Ian Kent <raven@themaw.net> Link: https://lore.kernel.org/r/20231128160337.29094-2-mszeredi@redhat.com [1] (folded) Link: https://lore.kernel.org/r/20231128160337.29094-3-mszeredi@redhat.com [2] (folded) Link: https://lore.kernel.org/r/20231128160337.29094-4-mszeredi@redhat.com [3] (folded) Link: https://lore.kernel.org/r/20231128160337.29094-5-mszeredi@redhat.com [4] (folded) [Christian Brauner <brauner@kernel.org>: various smaller fixes] Signed-off-by: Christian Brauner <brauner@kernel.org>
2023-10-25 14:02:03 +00:00
continue;
*mnt_ids = r->mnt_id_unique;
mnt_ids++;
nr_mnt_ids--;
ret++;
add listmount(2) syscall Add way to query the children of a particular mount. This is a more flexible way to iterate the mount tree than having to parse /proc/self/mountinfo. Lookup the mount by the new 64bit mount ID. If a mount needs to be queried based on path, then statx(2) can be used to first query the mount ID belonging to the path. Return an array of new (64bit) mount ID's. Without privileges only mounts are listed which are reachable from the task's root. Folded into this patch are several later improvements. Keeping them separate would make the history pointlessly confusing: * Recursive listing of mounts is the default now (cf. [1]). * Remove explicit LISTMOUNT_UNREACHABLE flag (cf. [1]) and fail if mount is unreachable from current root. This also makes permission checking consistent with statmount() (cf. [3]). * Start listing mounts in unique mount ID order (cf. [2]) to allow continuing listmount() from a midpoint. * Allow to continue listmount(). The @request_mask parameter is renamed and to @param to be usable by both statmount() and listmount(). If @param is set to a mount id then listmount() will continue listing mounts from that id on. This allows listing mounts in multiple listmount invocations without having to resize the buffer. If @param is zero then the listing starts from the beginning (cf. [4]). * Don't return EOVERFLOW, instead return the buffer size which allows to detect a full buffer as well (cf. [4]). Signed-off-by: Miklos Szeredi <mszeredi@redhat.com> Link: https://lore.kernel.org/r/20231025140205.3586473-6-mszeredi@redhat.com Reviewed-by: Ian Kent <raven@themaw.net> Link: https://lore.kernel.org/r/20231128160337.29094-2-mszeredi@redhat.com [1] (folded) Link: https://lore.kernel.org/r/20231128160337.29094-3-mszeredi@redhat.com [2] (folded) Link: https://lore.kernel.org/r/20231128160337.29094-4-mszeredi@redhat.com [3] (folded) Link: https://lore.kernel.org/r/20231128160337.29094-5-mszeredi@redhat.com [4] (folded) [Christian Brauner <brauner@kernel.org>: various smaller fixes] Signed-off-by: Christian Brauner <brauner@kernel.org>
2023-10-25 14:02:03 +00:00
}
return ret;
add listmount(2) syscall Add way to query the children of a particular mount. This is a more flexible way to iterate the mount tree than having to parse /proc/self/mountinfo. Lookup the mount by the new 64bit mount ID. If a mount needs to be queried based on path, then statx(2) can be used to first query the mount ID belonging to the path. Return an array of new (64bit) mount ID's. Without privileges only mounts are listed which are reachable from the task's root. Folded into this patch are several later improvements. Keeping them separate would make the history pointlessly confusing: * Recursive listing of mounts is the default now (cf. [1]). * Remove explicit LISTMOUNT_UNREACHABLE flag (cf. [1]) and fail if mount is unreachable from current root. This also makes permission checking consistent with statmount() (cf. [3]). * Start listing mounts in unique mount ID order (cf. [2]) to allow continuing listmount() from a midpoint. * Allow to continue listmount(). The @request_mask parameter is renamed and to @param to be usable by both statmount() and listmount(). If @param is set to a mount id then listmount() will continue listing mounts from that id on. This allows listing mounts in multiple listmount invocations without having to resize the buffer. If @param is zero then the listing starts from the beginning (cf. [4]). * Don't return EOVERFLOW, instead return the buffer size which allows to detect a full buffer as well (cf. [4]). Signed-off-by: Miklos Szeredi <mszeredi@redhat.com> Link: https://lore.kernel.org/r/20231025140205.3586473-6-mszeredi@redhat.com Reviewed-by: Ian Kent <raven@themaw.net> Link: https://lore.kernel.org/r/20231128160337.29094-2-mszeredi@redhat.com [1] (folded) Link: https://lore.kernel.org/r/20231128160337.29094-3-mszeredi@redhat.com [2] (folded) Link: https://lore.kernel.org/r/20231128160337.29094-4-mszeredi@redhat.com [3] (folded) Link: https://lore.kernel.org/r/20231128160337.29094-5-mszeredi@redhat.com [4] (folded) [Christian Brauner <brauner@kernel.org>: various smaller fixes] Signed-off-by: Christian Brauner <brauner@kernel.org>
2023-10-25 14:02:03 +00:00
}
SYSCALL_DEFINE4(listmount, const struct mnt_id_req __user *, req,
u64 __user *, mnt_ids, size_t, nr_mnt_ids, unsigned int, flags)
add listmount(2) syscall Add way to query the children of a particular mount. This is a more flexible way to iterate the mount tree than having to parse /proc/self/mountinfo. Lookup the mount by the new 64bit mount ID. If a mount needs to be queried based on path, then statx(2) can be used to first query the mount ID belonging to the path. Return an array of new (64bit) mount ID's. Without privileges only mounts are listed which are reachable from the task's root. Folded into this patch are several later improvements. Keeping them separate would make the history pointlessly confusing: * Recursive listing of mounts is the default now (cf. [1]). * Remove explicit LISTMOUNT_UNREACHABLE flag (cf. [1]) and fail if mount is unreachable from current root. This also makes permission checking consistent with statmount() (cf. [3]). * Start listing mounts in unique mount ID order (cf. [2]) to allow continuing listmount() from a midpoint. * Allow to continue listmount(). The @request_mask parameter is renamed and to @param to be usable by both statmount() and listmount(). If @param is set to a mount id then listmount() will continue listing mounts from that id on. This allows listing mounts in multiple listmount invocations without having to resize the buffer. If @param is zero then the listing starts from the beginning (cf. [4]). * Don't return EOVERFLOW, instead return the buffer size which allows to detect a full buffer as well (cf. [4]). Signed-off-by: Miklos Szeredi <mszeredi@redhat.com> Link: https://lore.kernel.org/r/20231025140205.3586473-6-mszeredi@redhat.com Reviewed-by: Ian Kent <raven@themaw.net> Link: https://lore.kernel.org/r/20231128160337.29094-2-mszeredi@redhat.com [1] (folded) Link: https://lore.kernel.org/r/20231128160337.29094-3-mszeredi@redhat.com [2] (folded) Link: https://lore.kernel.org/r/20231128160337.29094-4-mszeredi@redhat.com [3] (folded) Link: https://lore.kernel.org/r/20231128160337.29094-5-mszeredi@redhat.com [4] (folded) [Christian Brauner <brauner@kernel.org>: various smaller fixes] Signed-off-by: Christian Brauner <brauner@kernel.org>
2023-10-25 14:02:03 +00:00
{
u64 *kmnt_ids __free(kvfree) = NULL;
const size_t maxcount = 1000000;
struct mnt_namespace *ns __free(mnt_ns_release) = NULL;
add listmount(2) syscall Add way to query the children of a particular mount. This is a more flexible way to iterate the mount tree than having to parse /proc/self/mountinfo. Lookup the mount by the new 64bit mount ID. If a mount needs to be queried based on path, then statx(2) can be used to first query the mount ID belonging to the path. Return an array of new (64bit) mount ID's. Without privileges only mounts are listed which are reachable from the task's root. Folded into this patch are several later improvements. Keeping them separate would make the history pointlessly confusing: * Recursive listing of mounts is the default now (cf. [1]). * Remove explicit LISTMOUNT_UNREACHABLE flag (cf. [1]) and fail if mount is unreachable from current root. This also makes permission checking consistent with statmount() (cf. [3]). * Start listing mounts in unique mount ID order (cf. [2]) to allow continuing listmount() from a midpoint. * Allow to continue listmount(). The @request_mask parameter is renamed and to @param to be usable by both statmount() and listmount(). If @param is set to a mount id then listmount() will continue listing mounts from that id on. This allows listing mounts in multiple listmount invocations without having to resize the buffer. If @param is zero then the listing starts from the beginning (cf. [4]). * Don't return EOVERFLOW, instead return the buffer size which allows to detect a full buffer as well (cf. [4]). Signed-off-by: Miklos Szeredi <mszeredi@redhat.com> Link: https://lore.kernel.org/r/20231025140205.3586473-6-mszeredi@redhat.com Reviewed-by: Ian Kent <raven@themaw.net> Link: https://lore.kernel.org/r/20231128160337.29094-2-mszeredi@redhat.com [1] (folded) Link: https://lore.kernel.org/r/20231128160337.29094-3-mszeredi@redhat.com [2] (folded) Link: https://lore.kernel.org/r/20231128160337.29094-4-mszeredi@redhat.com [3] (folded) Link: https://lore.kernel.org/r/20231128160337.29094-5-mszeredi@redhat.com [4] (folded) [Christian Brauner <brauner@kernel.org>: various smaller fixes] Signed-off-by: Christian Brauner <brauner@kernel.org>
2023-10-25 14:02:03 +00:00
struct mnt_id_req kreq;
u64 last_mnt_id;
add listmount(2) syscall Add way to query the children of a particular mount. This is a more flexible way to iterate the mount tree than having to parse /proc/self/mountinfo. Lookup the mount by the new 64bit mount ID. If a mount needs to be queried based on path, then statx(2) can be used to first query the mount ID belonging to the path. Return an array of new (64bit) mount ID's. Without privileges only mounts are listed which are reachable from the task's root. Folded into this patch are several later improvements. Keeping them separate would make the history pointlessly confusing: * Recursive listing of mounts is the default now (cf. [1]). * Remove explicit LISTMOUNT_UNREACHABLE flag (cf. [1]) and fail if mount is unreachable from current root. This also makes permission checking consistent with statmount() (cf. [3]). * Start listing mounts in unique mount ID order (cf. [2]) to allow continuing listmount() from a midpoint. * Allow to continue listmount(). The @request_mask parameter is renamed and to @param to be usable by both statmount() and listmount(). If @param is set to a mount id then listmount() will continue listing mounts from that id on. This allows listing mounts in multiple listmount invocations without having to resize the buffer. If @param is zero then the listing starts from the beginning (cf. [4]). * Don't return EOVERFLOW, instead return the buffer size which allows to detect a full buffer as well (cf. [4]). Signed-off-by: Miklos Szeredi <mszeredi@redhat.com> Link: https://lore.kernel.org/r/20231025140205.3586473-6-mszeredi@redhat.com Reviewed-by: Ian Kent <raven@themaw.net> Link: https://lore.kernel.org/r/20231128160337.29094-2-mszeredi@redhat.com [1] (folded) Link: https://lore.kernel.org/r/20231128160337.29094-3-mszeredi@redhat.com [2] (folded) Link: https://lore.kernel.org/r/20231128160337.29094-4-mszeredi@redhat.com [3] (folded) Link: https://lore.kernel.org/r/20231128160337.29094-5-mszeredi@redhat.com [4] (folded) [Christian Brauner <brauner@kernel.org>: various smaller fixes] Signed-off-by: Christian Brauner <brauner@kernel.org>
2023-10-25 14:02:03 +00:00
ssize_t ret;
if (flags & ~LISTMOUNT_REVERSE)
add listmount(2) syscall Add way to query the children of a particular mount. This is a more flexible way to iterate the mount tree than having to parse /proc/self/mountinfo. Lookup the mount by the new 64bit mount ID. If a mount needs to be queried based on path, then statx(2) can be used to first query the mount ID belonging to the path. Return an array of new (64bit) mount ID's. Without privileges only mounts are listed which are reachable from the task's root. Folded into this patch are several later improvements. Keeping them separate would make the history pointlessly confusing: * Recursive listing of mounts is the default now (cf. [1]). * Remove explicit LISTMOUNT_UNREACHABLE flag (cf. [1]) and fail if mount is unreachable from current root. This also makes permission checking consistent with statmount() (cf. [3]). * Start listing mounts in unique mount ID order (cf. [2]) to allow continuing listmount() from a midpoint. * Allow to continue listmount(). The @request_mask parameter is renamed and to @param to be usable by both statmount() and listmount(). If @param is set to a mount id then listmount() will continue listing mounts from that id on. This allows listing mounts in multiple listmount invocations without having to resize the buffer. If @param is zero then the listing starts from the beginning (cf. [4]). * Don't return EOVERFLOW, instead return the buffer size which allows to detect a full buffer as well (cf. [4]). Signed-off-by: Miklos Szeredi <mszeredi@redhat.com> Link: https://lore.kernel.org/r/20231025140205.3586473-6-mszeredi@redhat.com Reviewed-by: Ian Kent <raven@themaw.net> Link: https://lore.kernel.org/r/20231128160337.29094-2-mszeredi@redhat.com [1] (folded) Link: https://lore.kernel.org/r/20231128160337.29094-3-mszeredi@redhat.com [2] (folded) Link: https://lore.kernel.org/r/20231128160337.29094-4-mszeredi@redhat.com [3] (folded) Link: https://lore.kernel.org/r/20231128160337.29094-5-mszeredi@redhat.com [4] (folded) [Christian Brauner <brauner@kernel.org>: various smaller fixes] Signed-off-by: Christian Brauner <brauner@kernel.org>
2023-10-25 14:02:03 +00:00
return -EINVAL;
/*
* If the mount namespace really has more than 1 million mounts the
* caller must iterate over the mount namespace (and reconsider their
* system design...).
*/
if (unlikely(nr_mnt_ids > maxcount))
return -EOVERFLOW;
if (!access_ok(mnt_ids, nr_mnt_ids * sizeof(*mnt_ids)))
return -EFAULT;
ret = copy_mnt_id_req(req, &kreq);
if (ret)
return ret;
add listmount(2) syscall Add way to query the children of a particular mount. This is a more flexible way to iterate the mount tree than having to parse /proc/self/mountinfo. Lookup the mount by the new 64bit mount ID. If a mount needs to be queried based on path, then statx(2) can be used to first query the mount ID belonging to the path. Return an array of new (64bit) mount ID's. Without privileges only mounts are listed which are reachable from the task's root. Folded into this patch are several later improvements. Keeping them separate would make the history pointlessly confusing: * Recursive listing of mounts is the default now (cf. [1]). * Remove explicit LISTMOUNT_UNREACHABLE flag (cf. [1]) and fail if mount is unreachable from current root. This also makes permission checking consistent with statmount() (cf. [3]). * Start listing mounts in unique mount ID order (cf. [2]) to allow continuing listmount() from a midpoint. * Allow to continue listmount(). The @request_mask parameter is renamed and to @param to be usable by both statmount() and listmount(). If @param is set to a mount id then listmount() will continue listing mounts from that id on. This allows listing mounts in multiple listmount invocations without having to resize the buffer. If @param is zero then the listing starts from the beginning (cf. [4]). * Don't return EOVERFLOW, instead return the buffer size which allows to detect a full buffer as well (cf. [4]). Signed-off-by: Miklos Szeredi <mszeredi@redhat.com> Link: https://lore.kernel.org/r/20231025140205.3586473-6-mszeredi@redhat.com Reviewed-by: Ian Kent <raven@themaw.net> Link: https://lore.kernel.org/r/20231128160337.29094-2-mszeredi@redhat.com [1] (folded) Link: https://lore.kernel.org/r/20231128160337.29094-3-mszeredi@redhat.com [2] (folded) Link: https://lore.kernel.org/r/20231128160337.29094-4-mszeredi@redhat.com [3] (folded) Link: https://lore.kernel.org/r/20231128160337.29094-5-mszeredi@redhat.com [4] (folded) [Christian Brauner <brauner@kernel.org>: various smaller fixes] Signed-off-by: Christian Brauner <brauner@kernel.org>
2023-10-25 14:02:03 +00:00
last_mnt_id = kreq.param;
/* The first valid unique mount id is MNT_UNIQUE_ID_OFFSET + 1. */
if (last_mnt_id != 0 && last_mnt_id <= MNT_UNIQUE_ID_OFFSET)
return -EINVAL;
add listmount(2) syscall Add way to query the children of a particular mount. This is a more flexible way to iterate the mount tree than having to parse /proc/self/mountinfo. Lookup the mount by the new 64bit mount ID. If a mount needs to be queried based on path, then statx(2) can be used to first query the mount ID belonging to the path. Return an array of new (64bit) mount ID's. Without privileges only mounts are listed which are reachable from the task's root. Folded into this patch are several later improvements. Keeping them separate would make the history pointlessly confusing: * Recursive listing of mounts is the default now (cf. [1]). * Remove explicit LISTMOUNT_UNREACHABLE flag (cf. [1]) and fail if mount is unreachable from current root. This also makes permission checking consistent with statmount() (cf. [3]). * Start listing mounts in unique mount ID order (cf. [2]) to allow continuing listmount() from a midpoint. * Allow to continue listmount(). The @request_mask parameter is renamed and to @param to be usable by both statmount() and listmount(). If @param is set to a mount id then listmount() will continue listing mounts from that id on. This allows listing mounts in multiple listmount invocations without having to resize the buffer. If @param is zero then the listing starts from the beginning (cf. [4]). * Don't return EOVERFLOW, instead return the buffer size which allows to detect a full buffer as well (cf. [4]). Signed-off-by: Miklos Szeredi <mszeredi@redhat.com> Link: https://lore.kernel.org/r/20231025140205.3586473-6-mszeredi@redhat.com Reviewed-by: Ian Kent <raven@themaw.net> Link: https://lore.kernel.org/r/20231128160337.29094-2-mszeredi@redhat.com [1] (folded) Link: https://lore.kernel.org/r/20231128160337.29094-3-mszeredi@redhat.com [2] (folded) Link: https://lore.kernel.org/r/20231128160337.29094-4-mszeredi@redhat.com [3] (folded) Link: https://lore.kernel.org/r/20231128160337.29094-5-mszeredi@redhat.com [4] (folded) [Christian Brauner <brauner@kernel.org>: various smaller fixes] Signed-off-by: Christian Brauner <brauner@kernel.org>
2023-10-25 14:02:03 +00:00
kmnt_ids = kvmalloc_array(nr_mnt_ids, sizeof(*kmnt_ids),
GFP_KERNEL_ACCOUNT);
if (!kmnt_ids)
return -ENOMEM;
ns = grab_requested_mnt_ns(&kreq);
if (!ns)
return -ENOENT;
if (kreq.mnt_ns_id && (ns != current->nsproxy->mnt_ns) &&
!ns_capable_noaudit(ns->user_ns, CAP_SYS_ADMIN))
return -ENOENT;
scoped_guard(rwsem_read, &namespace_sem)
ret = do_listmount(ns, kreq.mnt_id, last_mnt_id, kmnt_ids,
nr_mnt_ids, (flags & LISTMOUNT_REVERSE));
if (ret <= 0)
return ret;
if (copy_to_user(mnt_ids, kmnt_ids, ret * sizeof(*mnt_ids)))
return -EFAULT;
add listmount(2) syscall Add way to query the children of a particular mount. This is a more flexible way to iterate the mount tree than having to parse /proc/self/mountinfo. Lookup the mount by the new 64bit mount ID. If a mount needs to be queried based on path, then statx(2) can be used to first query the mount ID belonging to the path. Return an array of new (64bit) mount ID's. Without privileges only mounts are listed which are reachable from the task's root. Folded into this patch are several later improvements. Keeping them separate would make the history pointlessly confusing: * Recursive listing of mounts is the default now (cf. [1]). * Remove explicit LISTMOUNT_UNREACHABLE flag (cf. [1]) and fail if mount is unreachable from current root. This also makes permission checking consistent with statmount() (cf. [3]). * Start listing mounts in unique mount ID order (cf. [2]) to allow continuing listmount() from a midpoint. * Allow to continue listmount(). The @request_mask parameter is renamed and to @param to be usable by both statmount() and listmount(). If @param is set to a mount id then listmount() will continue listing mounts from that id on. This allows listing mounts in multiple listmount invocations without having to resize the buffer. If @param is zero then the listing starts from the beginning (cf. [4]). * Don't return EOVERFLOW, instead return the buffer size which allows to detect a full buffer as well (cf. [4]). Signed-off-by: Miklos Szeredi <mszeredi@redhat.com> Link: https://lore.kernel.org/r/20231025140205.3586473-6-mszeredi@redhat.com Reviewed-by: Ian Kent <raven@themaw.net> Link: https://lore.kernel.org/r/20231128160337.29094-2-mszeredi@redhat.com [1] (folded) Link: https://lore.kernel.org/r/20231128160337.29094-3-mszeredi@redhat.com [2] (folded) Link: https://lore.kernel.org/r/20231128160337.29094-4-mszeredi@redhat.com [3] (folded) Link: https://lore.kernel.org/r/20231128160337.29094-5-mszeredi@redhat.com [4] (folded) [Christian Brauner <brauner@kernel.org>: various smaller fixes] Signed-off-by: Christian Brauner <brauner@kernel.org>
2023-10-25 14:02:03 +00:00
return ret;
}
static void __init init_mount_tree(void)
{
struct vfsmount *mnt;
struct mount *m;
struct mnt_namespace *ns;
struct path root;
mnt = vfs_kern_mount(&rootfs_fs_type, 0, "rootfs", NULL);
if (IS_ERR(mnt))
panic("Can't create rootfs");
fs: scale mntget/mntput The problem that this patch aims to fix is vfsmount refcounting scalability. We need to take a reference on the vfsmount for every successful path lookup, which often go to the same mount point. The fundamental difficulty is that a "simple" reference count can never be made scalable, because any time a reference is dropped, we must check whether that was the last reference. To do that requires communication with all other CPUs that may have taken a reference count. We can make refcounts more scalable in a couple of ways, involving keeping distributed counters, and checking for the global-zero condition less frequently. - check the global sum once every interval (this will delay zero detection for some interval, so it's probably a showstopper for vfsmounts). - keep a local count and only taking the global sum when local reaches 0 (this is difficult for vfsmounts, because we can't hold preempt off for the life of a reference, so a counter would need to be per-thread or tied strongly to a particular CPU which requires more locking). - keep a local difference of increments and decrements, which allows us to sum the total difference and hence find the refcount when summing all CPUs. Then, keep a single integer "long" refcount for slow and long lasting references, and only take the global sum of local counters when the long refcount is 0. This last scheme is what I implemented here. Attached mounts and process root and working directory references are "long" references, and everything else is a short reference. This allows scalable vfsmount references during path walking over mounted subtrees and unattached (lazy umounted) mounts with processes still running in them. This results in one fewer atomic op in the fastpath: mntget is now just a per-CPU inc, rather than an atomic inc; and mntput just requires a spinlock and non-atomic decrement in the common case. However code is otherwise bigger and heavier, so single threaded performance is basically a wash. Signed-off-by: Nick Piggin <npiggin@kernel.dk>
2011-01-07 06:50:11 +00:00
ns = alloc_mnt_ns(&init_user_ns, false);
if (IS_ERR(ns))
panic("Can't allocate initial namespace");
m = real_mount(mnt);
ns->root = m;
ns->nr_mounts = 1;
mnt_add_to_ns(ns, m);
init_task.nsproxy->mnt_ns = ns;
get_mnt_ns(ns);
root.mnt = mnt;
root.dentry = mnt->mnt_root;
umount: Do not allow unmounting rootfs. Andrew Vagin <avagin@parallels.com> writes: > #define _GNU_SOURCE > #include <sys/types.h> > #include <sys/stat.h> > #include <fcntl.h> > #include <sched.h> > #include <unistd.h> > #include <sys/mount.h> > > int main(int argc, char **argv) > { > int fd; > > fd = open("/proc/self/ns/mnt", O_RDONLY); > if (fd < 0) > return 1; > while (1) { > if (umount2("/", MNT_DETACH) || > setns(fd, CLONE_NEWNS)) > break; > } > > return 0; > } > > root@ubuntu:/home/avagin# gcc -Wall nsenter.c -o nsenter > root@ubuntu:/home/avagin# strace ./nsenter > execve("./nsenter", ["./nsenter"], [/* 22 vars */]) = 0 > ... > open("/proc/self/ns/mnt", O_RDONLY) = 3 > umount("/", MNT_DETACH) = 0 > setns(3, 131072) = 0 > umount("/", MNT_DETACH > causes: > [ 260.548301] ------------[ cut here ]------------ > [ 260.550941] kernel BUG at /build/buildd/linux-3.13.0/fs/pnode.c:372! > [ 260.552068] invalid opcode: 0000 [#1] SMP > [ 260.552068] Modules linked in: xt_CHECKSUM iptable_mangle xt_tcpudp xt_addrtype xt_conntrack ipt_MASQUERADE iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat nf_conntrack bridge stp llc dm_thin_pool dm_persistent_data dm_bufio dm_bio_prison iptable_filter ip_tables x_tables crct10dif_pclmul crc32_pclmul ghash_clmulni_intel binfmt_misc nfsd auth_rpcgss nfs_acl aesni_intel nfs lockd aes_x86_64 sunrpc fscache lrw gf128mul glue_helper ablk_helper cryptd serio_raw ppdev parport_pc lp parport btrfs xor raid6_pq libcrc32c psmouse floppy > [ 260.552068] CPU: 0 PID: 1723 Comm: nsenter Not tainted 3.13.0-30-generic #55-Ubuntu > [ 260.552068] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 > [ 260.552068] task: ffff8800376097f0 ti: ffff880074824000 task.ti: ffff880074824000 > [ 260.552068] RIP: 0010:[<ffffffff811e9483>] [<ffffffff811e9483>] propagate_umount+0x123/0x130 > [ 260.552068] RSP: 0018:ffff880074825e98 EFLAGS: 00010246 > [ 260.552068] RAX: ffff88007c741140 RBX: 0000000000000002 RCX: ffff88007c741190 > [ 260.552068] RDX: ffff88007c741190 RSI: ffff880074825ec0 RDI: ffff880074825ec0 > [ 260.552068] RBP: ffff880074825eb0 R08: 00000000000172e0 R09: ffff88007fc172e0 > [ 260.552068] R10: ffffffff811cc642 R11: ffffea0001d59000 R12: ffff88007c741140 > [ 260.552068] R13: ffff88007c741140 R14: ffff88007c741140 R15: 0000000000000000 > [ 260.552068] FS: 00007fd5c7e41740(0000) GS:ffff88007fc00000(0000) knlGS:0000000000000000 > [ 260.552068] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 > [ 260.552068] CR2: 00007fd5c7968050 CR3: 0000000070124000 CR4: 00000000000406f0 > [ 260.552068] Stack: > [ 260.552068] 0000000000000002 0000000000000002 ffff88007c631000 ffff880074825ed8 > [ 260.552068] ffffffff811dcfac ffff88007c741140 0000000000000002 ffff88007c741160 > [ 260.552068] ffff880074825f38 ffffffff811dd12b ffffffff811cc642 0000000075640000 > [ 260.552068] Call Trace: > [ 260.552068] [<ffffffff811dcfac>] umount_tree+0x20c/0x260 > [ 260.552068] [<ffffffff811dd12b>] do_umount+0x12b/0x300 > [ 260.552068] [<ffffffff811cc642>] ? final_putname+0x22/0x50 > [ 260.552068] [<ffffffff811cc849>] ? putname+0x29/0x40 > [ 260.552068] [<ffffffff811dd88c>] SyS_umount+0xdc/0x100 > [ 260.552068] [<ffffffff8172aeff>] tracesys+0xe1/0xe6 > [ 260.552068] Code: 89 50 08 48 8b 50 08 48 89 02 49 89 45 08 e9 72 ff ff ff 0f 1f 44 00 00 4c 89 e6 4c 89 e7 e8 f5 f6 ff ff 48 89 c3 e9 39 ff ff ff <0f> 0b 66 2e 0f 1f 84 00 00 00 00 00 90 66 66 66 66 90 55 b8 01 > [ 260.552068] RIP [<ffffffff811e9483>] propagate_umount+0x123/0x130 > [ 260.552068] RSP <ffff880074825e98> > [ 260.611451] ---[ end trace 11c33d85f1d4c652 ]-- Which in practice is totally uninteresting. Only the global root user can do it, and it is just a stupid thing to do. However that is no excuse to allow a silly way to oops the kernel. We can avoid this silly problem by setting MNT_LOCKED on the rootfs mount point and thus avoid needing any special cases in the unmount code. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2014-10-07 19:19:53 +00:00
mnt->mnt_flags |= MNT_LOCKED;
set_fs_pwd(current->fs, &root);
set_fs_root(current->fs, &root);
mnt_ns_tree_add(ns);
}
void __init mnt_init(void)
{
int err;
mnt_cache = kmem_cache_create("mnt_cache", sizeof(struct mount),
memcg: enable accounting for mnt_cache entries Patch series "memcg accounting from OpenVZ", v7. OpenVZ uses memory accounting 20+ years since v2.2.x linux kernels. Initially we used our own accounting subsystem, then partially committed it to upstream, and a few years ago switched to cgroups v1. Now we're rebasing again, revising our old patches and trying to push them upstream. We try to protect the host system from any misuse of kernel memory allocation triggered by untrusted users inside the containers. Patch-set is addressed mostly to cgroups maintainers and cgroups@ mailing list, though I would be very grateful for any comments from maintainersi of affected subsystems or other people added in cc: Compared to the upstream, we additionally account the following kernel objects: - network devices and its Tx/Rx queues - ipv4/v6 addresses and routing-related objects - inet_bind_bucket cache objects - VLAN group arrays - ipv6/sit: ip_tunnel_prl - scm_fp_list objects used by SCM_RIGHTS messages of Unix sockets - nsproxy and namespace objects itself - IPC objects: semaphores, message queues and share memory segments - mounts - pollfd and select bits arrays - signals and posix timers - file lock - fasync_struct used by the file lease code and driver's fasync queues - tty objects - per-mm LDT We have an incorrect/incomplete/obsoleted accounting for few other kernel objects: sk_filter, af_packets, netlink and xt_counters for iptables. They require rework and probably will be dropped at all. Also we're going to add an accounting for nft, however it is not ready yet. We have not tested performance on upstream, however, our performance team compares our current RHEL7-based production kernel and reports that they are at least not worse as the according original RHEL7 kernel. This patch (of 10): The kernel allocates ~400 bytes of 'struct mount' for any new mount. Creating a new mount namespace clones most of the parent mounts, and this can be repeated many times. Additionally, each mount allocates up to PATH_MAX=4096 bytes for mnt->mnt_devname. It makes sense to account for these allocations to restrict the host's memory consumption from inside the memcg-limited container. Link: https://lkml.kernel.org/r/045db11f-4a45-7c9b-2664-5b32c2b44943@virtuozzo.com Signed-off-by: Vasily Averin <vvs@virtuozzo.com> Reviewed-by: Shakeel Butt <shakeelb@google.com> Acked-by: Christian Brauner <christian.brauner@ubuntu.com> Cc: Tejun Heo <tj@kernel.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Roman Gushchin <guro@fb.com> Cc: Yutian Yang <nglaive@gmail.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Andrei Vagin <avagin@gmail.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Dmitry Safonov <0x7f454c46@gmail.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: "J. Bruce Fields" <bfields@fieldses.org> Cc: Jeff Layton <jlayton@kernel.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jiri Slaby <jirislaby@kernel.org> Cc: Kirill Tkhai <ktkhai@virtuozzo.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Serge Hallyn <serge@hallyn.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Zefan Li <lizefan.x@bytedance.com> Cc: Borislav Petkov <bp@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-02 21:55:10 +00:00
0, SLAB_HWCACHE_ALIGN|SLAB_PANIC|SLAB_ACCOUNT, NULL);
mount_hashtable = alloc_large_system_hash("Mount-cache",
sizeof(struct hlist_head),
mhash_entries, 19,
mm: update callers to use HASH_ZERO flag Update dcache, inode, pid, mountpoint, and mount hash tables to use HASH_ZERO, and remove initialization after allocations. In case of places where HASH_EARLY was used such as in __pv_init_lock_hash the zeroed hash table was already assumed, because memblock zeroes the memory. CPU: SPARC M6, Memory: 7T Before fix: Dentry cache hash table entries: 1073741824 Inode-cache hash table entries: 536870912 Mount-cache hash table entries: 16777216 Mountpoint-cache hash table entries: 16777216 ftrace: allocating 20414 entries in 40 pages Total time: 11.798s After fix: Dentry cache hash table entries: 1073741824 Inode-cache hash table entries: 536870912 Mount-cache hash table entries: 16777216 Mountpoint-cache hash table entries: 16777216 ftrace: allocating 20414 entries in 40 pages Total time: 3.198s CPU: Intel Xeon E5-2630, Memory: 2.2T: Before fix: Dentry cache hash table entries: 536870912 Inode-cache hash table entries: 268435456 Mount-cache hash table entries: 8388608 Mountpoint-cache hash table entries: 8388608 CPU: Physical Processor ID: 0 Total time: 3.245s After fix: Dentry cache hash table entries: 536870912 Inode-cache hash table entries: 268435456 Mount-cache hash table entries: 8388608 Mountpoint-cache hash table entries: 8388608 CPU: Physical Processor ID: 0 Total time: 3.244s Link: http://lkml.kernel.org/r/1488432825-92126-4-git-send-email-pasha.tatashin@oracle.com Signed-off-by: Pavel Tatashin <pasha.tatashin@oracle.com> Reviewed-by: Babu Moger <babu.moger@oracle.com> Cc: David Miller <davem@davemloft.net> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-06 22:39:11 +00:00
HASH_ZERO,
&m_hash_shift, &m_hash_mask, 0, 0);
mountpoint_hashtable = alloc_large_system_hash("Mountpoint-cache",
sizeof(struct hlist_head),
mphash_entries, 19,
mm: update callers to use HASH_ZERO flag Update dcache, inode, pid, mountpoint, and mount hash tables to use HASH_ZERO, and remove initialization after allocations. In case of places where HASH_EARLY was used such as in __pv_init_lock_hash the zeroed hash table was already assumed, because memblock zeroes the memory. CPU: SPARC M6, Memory: 7T Before fix: Dentry cache hash table entries: 1073741824 Inode-cache hash table entries: 536870912 Mount-cache hash table entries: 16777216 Mountpoint-cache hash table entries: 16777216 ftrace: allocating 20414 entries in 40 pages Total time: 11.798s After fix: Dentry cache hash table entries: 1073741824 Inode-cache hash table entries: 536870912 Mount-cache hash table entries: 16777216 Mountpoint-cache hash table entries: 16777216 ftrace: allocating 20414 entries in 40 pages Total time: 3.198s CPU: Intel Xeon E5-2630, Memory: 2.2T: Before fix: Dentry cache hash table entries: 536870912 Inode-cache hash table entries: 268435456 Mount-cache hash table entries: 8388608 Mountpoint-cache hash table entries: 8388608 CPU: Physical Processor ID: 0 Total time: 3.245s After fix: Dentry cache hash table entries: 536870912 Inode-cache hash table entries: 268435456 Mount-cache hash table entries: 8388608 Mountpoint-cache hash table entries: 8388608 CPU: Physical Processor ID: 0 Total time: 3.244s Link: http://lkml.kernel.org/r/1488432825-92126-4-git-send-email-pasha.tatashin@oracle.com Signed-off-by: Pavel Tatashin <pasha.tatashin@oracle.com> Reviewed-by: Babu Moger <babu.moger@oracle.com> Cc: David Miller <davem@davemloft.net> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-06 22:39:11 +00:00
HASH_ZERO,
&mp_hash_shift, &mp_hash_mask, 0, 0);
if (!mount_hashtable || !mountpoint_hashtable)
panic("Failed to allocate mount hash table\n");
kernfs_init();
err = sysfs_init();
if (err)
printk(KERN_WARNING "%s: sysfs_init error: %d\n",
__func__, err);
fs_kobj = kobject_create_and_add("fs", NULL);
if (!fs_kobj)
printk(KERN_WARNING "%s: kobj create error\n", __func__);
shmem_init();
init_rootfs();
init_mount_tree();
}
void put_mnt_ns(struct mnt_namespace *ns)
{
mnt: Use generic ns_common::count Switch over mount namespaces to use the newly introduced common lifetime counter. Currently every namespace type has its own lifetime counter which is stored in the specific namespace struct. The lifetime counters are used identically for all namespaces types. Namespaces may of course have additional unrelated counters and these are not altered. This introduces a common lifetime counter into struct ns_common. The ns_common struct encompasses information that all namespaces share. That should include the lifetime counter since its common for all of them. It also allows us to unify the type of the counters across all namespaces. Most of them use refcount_t but one uses atomic_t and at least one uses kref. Especially the last one doesn't make much sense since it's just a wrapper around refcount_t since 2016 and actually complicates cleanup operations by having to use container_of() to cast the correct namespace struct out of struct ns_common. Having the lifetime counter for the namespaces in one place reduces maintenance cost. Not just because after switching all namespaces over we will have removed more code than we added but also because the logic is more easily understandable and we indicate to the user that the basic lifetime requirements for all namespaces are currently identical. Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com> Reviewed-by: Kees Cook <keescook@chromium.org> Acked-by: Christian Brauner <christian.brauner@ubuntu.com> Link: https://lore.kernel.org/r/159644980287.604812.761686947449081169.stgit@localhost.localdomain Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
2020-08-03 10:16:42 +00:00
if (!refcount_dec_and_test(&ns->ns.count))
return;
drop_collected_mounts(&ns->root->mnt);
free_mnt_ns(ns);
}
struct vfsmount *kern_mount(struct file_system_type *type)
{
struct vfsmount *mnt;
mnt = vfs_kern_mount(type, SB_KERNMOUNT, type->name, NULL);
if (!IS_ERR(mnt)) {
/*
* it is a longterm mount, don't release mnt until
* we unmount before file sys is unregistered
*/
real_mount(mnt)->mnt_ns = MNT_NS_INTERNAL;
}
return mnt;
}
EXPORT_SYMBOL_GPL(kern_mount);
void kern_unmount(struct vfsmount *mnt)
{
/* release long term mount so mount point can be released */
if (!IS_ERR(mnt)) {
mnt_make_shortterm(mnt);
RCU'd vfsmounts * RCU-delayed freeing of vfsmounts * vfsmount_lock replaced with a seqlock (mount_lock) * sequence number from mount_lock is stored in nameidata->m_seq and used when we exit RCU mode * new vfsmount flag - MNT_SYNC_UMOUNT. Set by umount_tree() when its caller knows that vfsmount will have no surviving references. * synchronize_rcu() done between unlocking namespace_sem in namespace_unlock() and doing pending mntput(). * new helper: legitimize_mnt(mnt, seq). Checks the mount_lock sequence number against seq, then grabs reference to mnt. Then it rechecks mount_lock again to close the race and either returns success or drops the reference it has acquired. The subtle point is that in case of MNT_SYNC_UMOUNT we can simply decrement the refcount and sod off - aforementioned synchronize_rcu() makes sure that final mntput() won't come until we leave RCU mode. We need that, since we don't want to end up with some lazy pathwalk racing with umount() and stealing the final mntput() from it - caller of umount() may expect it to return only once the fs is shut down and we don't want to break that. In other cases (i.e. with MNT_SYNC_UMOUNT absent) we have to do full-blown mntput() in case of mount_lock sequence number mismatch happening just as we'd grabbed the reference, but in those cases we won't be stealing the final mntput() from anything that would care. * mntput_no_expire() doesn't lock anything on the fast path now. Incidentally, SMP and UP cases are handled the same way - no ifdefs there. * normal pathname resolution does *not* do any writes to mount_lock. It does, of course, bump the refcounts of vfsmount and dentry in the very end, but that's it. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-09-30 02:06:07 +00:00
synchronize_rcu(); /* yecchhh... */
mntput(mnt);
}
}
EXPORT_SYMBOL(kern_unmount);
fix apparmor dereferencing potentially freed dentry, sanitize __d_path() API __d_path() API is asking for trouble and in case of apparmor d_namespace_path() getting just that. The root cause is that when __d_path() misses the root it had been told to look for, it stores the location of the most remote ancestor in *root. Without grabbing references. Sure, at the moment of call it had been pinned down by what we have in *path. And if we raced with umount -l, we could have very well stopped at vfsmount/dentry that got freed as soon as prepend_path() dropped vfsmount_lock. It is safe to compare these pointers with pre-existing (and known to be still alive) vfsmount and dentry, as long as all we are asking is "is it the same address?". Dereferencing is not safe and apparmor ended up stepping into that. d_namespace_path() really wants to examine the place where we stopped, even if it's not connected to our namespace. As the result, it looked at ->d_sb->s_magic of a dentry that might've been already freed by that point. All other callers had been careful enough to avoid that, but it's really a bad interface - it invites that kind of trouble. The fix is fairly straightforward, even though it's bigger than I'd like: * prepend_path() root argument becomes const. * __d_path() is never called with NULL/NULL root. It was a kludge to start with. Instead, we have an explicit function - d_absolute_root(). Same as __d_path(), except that it doesn't get root passed and stops where it stops. apparmor and tomoyo are using it. * __d_path() returns NULL on path outside of root. The main caller is show_mountinfo() and that's precisely what we pass root for - to skip those outside chroot jail. Those who don't want that can (and do) use d_path(). * __d_path() root argument becomes const. Everyone agrees, I hope. * apparmor does *NOT* try to use __d_path() or any of its variants when it sees that path->mnt is an internal vfsmount. In that case it's definitely not mounted anywhere and dentry_path() is exactly what we want there. Handling of sysctl()-triggered weirdness is moved to that place. * if apparmor is asked to do pathname relative to chroot jail and __d_path() tells it we it's not in that jail, the sucker just calls d_absolute_path() instead. That's the other remaining caller of __d_path(), BTW. * seq_path_root() does _NOT_ return -ENAMETOOLONG (it's stupid anyway - the normal seq_file logics will take care of growing the buffer and redoing the call of ->show() just fine). However, if it gets path not reachable from root, it returns SEQ_SKIP. The only caller adjusted (i.e. stopped ignoring the return value as it used to do). Reviewed-by: John Johansen <john.johansen@canonical.com> ACKed-by: John Johansen <john.johansen@canonical.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Cc: stable@vger.kernel.org
2011-12-05 13:43:34 +00:00
void kern_unmount_array(struct vfsmount *mnt[], unsigned int num)
{
unsigned int i;
for (i = 0; i < num; i++)
mnt_make_shortterm(mnt[i]);
synchronize_rcu_expedited();
for (i = 0; i < num; i++)
mntput(mnt[i]);
}
EXPORT_SYMBOL(kern_unmount_array);
fix apparmor dereferencing potentially freed dentry, sanitize __d_path() API __d_path() API is asking for trouble and in case of apparmor d_namespace_path() getting just that. The root cause is that when __d_path() misses the root it had been told to look for, it stores the location of the most remote ancestor in *root. Without grabbing references. Sure, at the moment of call it had been pinned down by what we have in *path. And if we raced with umount -l, we could have very well stopped at vfsmount/dentry that got freed as soon as prepend_path() dropped vfsmount_lock. It is safe to compare these pointers with pre-existing (and known to be still alive) vfsmount and dentry, as long as all we are asking is "is it the same address?". Dereferencing is not safe and apparmor ended up stepping into that. d_namespace_path() really wants to examine the place where we stopped, even if it's not connected to our namespace. As the result, it looked at ->d_sb->s_magic of a dentry that might've been already freed by that point. All other callers had been careful enough to avoid that, but it's really a bad interface - it invites that kind of trouble. The fix is fairly straightforward, even though it's bigger than I'd like: * prepend_path() root argument becomes const. * __d_path() is never called with NULL/NULL root. It was a kludge to start with. Instead, we have an explicit function - d_absolute_root(). Same as __d_path(), except that it doesn't get root passed and stops where it stops. apparmor and tomoyo are using it. * __d_path() returns NULL on path outside of root. The main caller is show_mountinfo() and that's precisely what we pass root for - to skip those outside chroot jail. Those who don't want that can (and do) use d_path(). * __d_path() root argument becomes const. Everyone agrees, I hope. * apparmor does *NOT* try to use __d_path() or any of its variants when it sees that path->mnt is an internal vfsmount. In that case it's definitely not mounted anywhere and dentry_path() is exactly what we want there. Handling of sysctl()-triggered weirdness is moved to that place. * if apparmor is asked to do pathname relative to chroot jail and __d_path() tells it we it's not in that jail, the sucker just calls d_absolute_path() instead. That's the other remaining caller of __d_path(), BTW. * seq_path_root() does _NOT_ return -ENAMETOOLONG (it's stupid anyway - the normal seq_file logics will take care of growing the buffer and redoing the call of ->show() just fine). However, if it gets path not reachable from root, it returns SEQ_SKIP. The only caller adjusted (i.e. stopped ignoring the return value as it used to do). Reviewed-by: John Johansen <john.johansen@canonical.com> ACKed-by: John Johansen <john.johansen@canonical.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Cc: stable@vger.kernel.org
2011-12-05 13:43:34 +00:00
bool our_mnt(struct vfsmount *mnt)
{
return check_mnt(real_mount(mnt));
fix apparmor dereferencing potentially freed dentry, sanitize __d_path() API __d_path() API is asking for trouble and in case of apparmor d_namespace_path() getting just that. The root cause is that when __d_path() misses the root it had been told to look for, it stores the location of the most remote ancestor in *root. Without grabbing references. Sure, at the moment of call it had been pinned down by what we have in *path. And if we raced with umount -l, we could have very well stopped at vfsmount/dentry that got freed as soon as prepend_path() dropped vfsmount_lock. It is safe to compare these pointers with pre-existing (and known to be still alive) vfsmount and dentry, as long as all we are asking is "is it the same address?". Dereferencing is not safe and apparmor ended up stepping into that. d_namespace_path() really wants to examine the place where we stopped, even if it's not connected to our namespace. As the result, it looked at ->d_sb->s_magic of a dentry that might've been already freed by that point. All other callers had been careful enough to avoid that, but it's really a bad interface - it invites that kind of trouble. The fix is fairly straightforward, even though it's bigger than I'd like: * prepend_path() root argument becomes const. * __d_path() is never called with NULL/NULL root. It was a kludge to start with. Instead, we have an explicit function - d_absolute_root(). Same as __d_path(), except that it doesn't get root passed and stops where it stops. apparmor and tomoyo are using it. * __d_path() returns NULL on path outside of root. The main caller is show_mountinfo() and that's precisely what we pass root for - to skip those outside chroot jail. Those who don't want that can (and do) use d_path(). * __d_path() root argument becomes const. Everyone agrees, I hope. * apparmor does *NOT* try to use __d_path() or any of its variants when it sees that path->mnt is an internal vfsmount. In that case it's definitely not mounted anywhere and dentry_path() is exactly what we want there. Handling of sysctl()-triggered weirdness is moved to that place. * if apparmor is asked to do pathname relative to chroot jail and __d_path() tells it we it's not in that jail, the sucker just calls d_absolute_path() instead. That's the other remaining caller of __d_path(), BTW. * seq_path_root() does _NOT_ return -ENAMETOOLONG (it's stupid anyway - the normal seq_file logics will take care of growing the buffer and redoing the call of ->show() just fine). However, if it gets path not reachable from root, it returns SEQ_SKIP. The only caller adjusted (i.e. stopped ignoring the return value as it used to do). Reviewed-by: John Johansen <john.johansen@canonical.com> ACKed-by: John Johansen <john.johansen@canonical.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Cc: stable@vger.kernel.org
2011-12-05 13:43:34 +00:00
}
bool current_chrooted(void)
{
/* Does the current process have a non-standard root */
struct path ns_root;
struct path fs_root;
bool chrooted;
/* Find the namespace root */
ns_root.mnt = &current->nsproxy->mnt_ns->root->mnt;
ns_root.dentry = ns_root.mnt->mnt_root;
path_get(&ns_root);
while (d_mountpoint(ns_root.dentry) && follow_down_one(&ns_root))
;
get_fs_root(current->fs, &fs_root);
chrooted = !path_equal(&fs_root, &ns_root);
path_put(&fs_root);
path_put(&ns_root);
return chrooted;
}
static bool mnt_already_visible(struct mnt_namespace *ns,
const struct super_block *sb,
int *new_mnt_flags)
{
int new_flags = *new_mnt_flags;
struct mount *mnt, *n;
bool visible = false;
down_read(&namespace_sem);
rbtree_postorder_for_each_entry_safe(mnt, n, &ns->mounts, mnt_node) {
struct mount *child;
int mnt_flags;
if (mnt->mnt.mnt_sb->s_type != sb->s_type)
continue;
/* This mount is not fully visible if it's root directory
* is not the root directory of the filesystem.
*/
if (mnt->mnt.mnt_root != mnt->mnt.mnt_sb->s_root)
continue;
/* A local view of the mount flags */
mnt_flags = mnt->mnt.mnt_flags;
/* Don't miss readonly hidden in the superblock flags */
if (sb_rdonly(mnt->mnt.mnt_sb))
mnt_flags |= MNT_LOCK_READONLY;
/* Verify the mount flags are equal to or more permissive
* than the proposed new mount.
*/
if ((mnt_flags & MNT_LOCK_READONLY) &&
!(new_flags & MNT_READONLY))
continue;
if ((mnt_flags & MNT_LOCK_ATIME) &&
((mnt_flags & MNT_ATIME_MASK) != (new_flags & MNT_ATIME_MASK)))
continue;
/* This mount is not fully visible if there are any
* locked child mounts that cover anything except for
* empty directories.
*/
list_for_each_entry(child, &mnt->mnt_mounts, mnt_child) {
struct inode *inode = child->mnt_mountpoint->d_inode;
/* Only worry about locked mounts */
if (!(child->mnt.mnt_flags & MNT_LOCKED))
continue;
/* Is the directory permanently empty? */
if (!is_empty_dir_inode(inode))
goto next;
}
/* Preserve the locked attributes */
*new_mnt_flags |= mnt_flags & (MNT_LOCK_READONLY | \
MNT_LOCK_ATIME);
visible = true;
goto found;
next: ;
}
found:
up_read(&namespace_sem);
return visible;
}
static bool mount_too_revealing(const struct super_block *sb, int *new_mnt_flags)
{
const unsigned long required_iflags = SB_I_NOEXEC | SB_I_NODEV;
struct mnt_namespace *ns = current->nsproxy->mnt_ns;
unsigned long s_iflags;
if (ns->user_ns == &init_user_ns)
return false;
/* Can this filesystem be too revealing? */
s_iflags = sb->s_iflags;
if (!(s_iflags & SB_I_USERNS_VISIBLE))
return false;
if ((s_iflags & required_iflags) != required_iflags) {
WARN_ONCE(1, "Expected s_iflags to contain 0x%lx\n",
required_iflags);
return true;
}
return !mnt_already_visible(ns, sb, new_mnt_flags);
}
fs: Treat foreign mounts as nosuid If a process gets access to a mount from a different user namespace, that process should not be able to take advantage of setuid files or selinux entrypoints from that filesystem. Prevent this by treating mounts from other mount namespaces and those not owned by current_user_ns() or an ancestor as nosuid. This will make it safer to allow more complex filesystems to be mounted in non-root user namespaces. This does not remove the need for MNT_LOCK_NOSUID. The setuid, setgid, and file capability bits can no longer be abused if code in a user namespace were to clear nosuid on an untrusted filesystem, but this patch, by itself, is insufficient to protect the system from abuse of files that, when execed, would increase MAC privilege. As a more concrete explanation, any task that can manipulate a vfsmount associated with a given user namespace already has capabilities in that namespace and all of its descendents. If they can cause a malicious setuid, setgid, or file-caps executable to appear in that mount, then that executable will only allow them to elevate privileges in exactly the set of namespaces in which they are already privileges. On the other hand, if they can cause a malicious executable to appear with a dangerous MAC label, running it could change the caller's security context in a way that should not have been possible, even inside the namespace in which the task is confined. As a hardening measure, this would have made CVE-2014-5207 much more difficult to exploit. Signed-off-by: Andy Lutomirski <luto@amacapital.net> Signed-off-by: Seth Forshee <seth.forshee@canonical.com> Acked-by: James Morris <james.l.morris@oracle.com> Acked-by: Serge Hallyn <serge.hallyn@canonical.com> Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2016-06-23 21:41:05 +00:00
bool mnt_may_suid(struct vfsmount *mnt)
{
/*
* Foreign mounts (accessed via fchdir or through /proc
* symlinks) are always treated as if they are nosuid. This
* prevents namespaces from trusting potentially unsafe
* suid/sgid bits, file caps, or security labels that originate
* in other namespaces.
*/
return !(mnt->mnt_flags & MNT_NOSUID) && check_mnt(real_mount(mnt)) &&
current_in_userns(mnt->mnt_sb->s_user_ns);
}
static struct ns_common *mntns_get(struct task_struct *task)
{
struct ns_common *ns = NULL;
struct nsproxy *nsproxy;
task_lock(task);
nsproxy = task->nsproxy;
if (nsproxy) {
ns = &nsproxy->mnt_ns->ns;
get_mnt_ns(to_mnt_ns(ns));
}
task_unlock(task);
return ns;
}
static void mntns_put(struct ns_common *ns)
{
put_mnt_ns(to_mnt_ns(ns));
}
nsproxy: add struct nsset Add a simple struct nsset. It holds all necessary pieces to switch to a new set of namespaces without leaving a task in a half-switched state which we will make use of in the next patch. This patch switches the existing setns logic over without causing a change in setns() behavior. This brings setns() closer to how unshare() works(). The prepare_ns() function is responsible to prepare all necessary information. This has two reasons. First it minimizes dependencies between individual namespaces, i.e. all install handler can expect that all fields are properly initialized independent in what order they are called in. Second, this makes the code easier to maintain and easier to follow if it needs to be changed. The prepare_ns() helper will only be switched over to use a flags argument in the next patch. Here it will still use nstype as a simple integer argument which was argued would be clearer. I'm not particularly opinionated about this if it really helps or not. The struct nsset itself already contains the flags field since its name already indicates that it can contain information required by different namespaces. None of this should have functional consequences. Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com> Reviewed-by: Serge Hallyn <serge@hallyn.com> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Serge Hallyn <serge@hallyn.com> Cc: Jann Horn <jannh@google.com> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Cc: Aleksa Sarai <cyphar@cyphar.com> Link: https://lore.kernel.org/r/20200505140432.181565-2-christian.brauner@ubuntu.com
2020-05-05 14:04:30 +00:00
static int mntns_install(struct nsset *nsset, struct ns_common *ns)
{
nsproxy: add struct nsset Add a simple struct nsset. It holds all necessary pieces to switch to a new set of namespaces without leaving a task in a half-switched state which we will make use of in the next patch. This patch switches the existing setns logic over without causing a change in setns() behavior. This brings setns() closer to how unshare() works(). The prepare_ns() function is responsible to prepare all necessary information. This has two reasons. First it minimizes dependencies between individual namespaces, i.e. all install handler can expect that all fields are properly initialized independent in what order they are called in. Second, this makes the code easier to maintain and easier to follow if it needs to be changed. The prepare_ns() helper will only be switched over to use a flags argument in the next patch. Here it will still use nstype as a simple integer argument which was argued would be clearer. I'm not particularly opinionated about this if it really helps or not. The struct nsset itself already contains the flags field since its name already indicates that it can contain information required by different namespaces. None of this should have functional consequences. Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com> Reviewed-by: Serge Hallyn <serge@hallyn.com> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Serge Hallyn <serge@hallyn.com> Cc: Jann Horn <jannh@google.com> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Cc: Aleksa Sarai <cyphar@cyphar.com> Link: https://lore.kernel.org/r/20200505140432.181565-2-christian.brauner@ubuntu.com
2020-05-05 14:04:30 +00:00
struct nsproxy *nsproxy = nsset->nsproxy;
struct fs_struct *fs = nsset->fs;
struct mnt_namespace *mnt_ns = to_mnt_ns(ns), *old_mnt_ns;
nsproxy: add struct nsset Add a simple struct nsset. It holds all necessary pieces to switch to a new set of namespaces without leaving a task in a half-switched state which we will make use of in the next patch. This patch switches the existing setns logic over without causing a change in setns() behavior. This brings setns() closer to how unshare() works(). The prepare_ns() function is responsible to prepare all necessary information. This has two reasons. First it minimizes dependencies between individual namespaces, i.e. all install handler can expect that all fields are properly initialized independent in what order they are called in. Second, this makes the code easier to maintain and easier to follow if it needs to be changed. The prepare_ns() helper will only be switched over to use a flags argument in the next patch. Here it will still use nstype as a simple integer argument which was argued would be clearer. I'm not particularly opinionated about this if it really helps or not. The struct nsset itself already contains the flags field since its name already indicates that it can contain information required by different namespaces. None of this should have functional consequences. Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com> Reviewed-by: Serge Hallyn <serge@hallyn.com> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Serge Hallyn <serge@hallyn.com> Cc: Jann Horn <jannh@google.com> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Cc: Aleksa Sarai <cyphar@cyphar.com> Link: https://lore.kernel.org/r/20200505140432.181565-2-christian.brauner@ubuntu.com
2020-05-05 14:04:30 +00:00
struct user_namespace *user_ns = nsset->cred->user_ns;
struct path root;
int err;
if (!ns_capable(mnt_ns->user_ns, CAP_SYS_ADMIN) ||
nsproxy: add struct nsset Add a simple struct nsset. It holds all necessary pieces to switch to a new set of namespaces without leaving a task in a half-switched state which we will make use of in the next patch. This patch switches the existing setns logic over without causing a change in setns() behavior. This brings setns() closer to how unshare() works(). The prepare_ns() function is responsible to prepare all necessary information. This has two reasons. First it minimizes dependencies between individual namespaces, i.e. all install handler can expect that all fields are properly initialized independent in what order they are called in. Second, this makes the code easier to maintain and easier to follow if it needs to be changed. The prepare_ns() helper will only be switched over to use a flags argument in the next patch. Here it will still use nstype as a simple integer argument which was argued would be clearer. I'm not particularly opinionated about this if it really helps or not. The struct nsset itself already contains the flags field since its name already indicates that it can contain information required by different namespaces. None of this should have functional consequences. Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com> Reviewed-by: Serge Hallyn <serge@hallyn.com> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Serge Hallyn <serge@hallyn.com> Cc: Jann Horn <jannh@google.com> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Cc: Aleksa Sarai <cyphar@cyphar.com> Link: https://lore.kernel.org/r/20200505140432.181565-2-christian.brauner@ubuntu.com
2020-05-05 14:04:30 +00:00
!ns_capable(user_ns, CAP_SYS_CHROOT) ||
!ns_capable(user_ns, CAP_SYS_ADMIN))
return -EPERM;
if (is_anon_ns(mnt_ns))
return -EINVAL;
if (fs->users != 1)
return -EINVAL;
get_mnt_ns(mnt_ns);
old_mnt_ns = nsproxy->mnt_ns;
nsproxy->mnt_ns = mnt_ns;
/* Find the root */
err = vfs_path_lookup(mnt_ns->root->mnt.mnt_root, &mnt_ns->root->mnt,
"/", LOOKUP_DOWN, &root);
if (err) {
/* revert to old namespace */
nsproxy->mnt_ns = old_mnt_ns;
put_mnt_ns(mnt_ns);
return err;
}
put_mnt_ns(old_mnt_ns);
/* Update the pwd and root */
set_fs_pwd(fs, &root);
set_fs_root(fs, &root);
path_put(&root);
return 0;
}
static struct user_namespace *mntns_owner(struct ns_common *ns)
{
return to_mnt_ns(ns)->user_ns;
}
const struct proc_ns_operations mntns_operations = {
.name = "mnt",
.type = CLONE_NEWNS,
.get = mntns_get,
.put = mntns_put,
.install = mntns_install,
.owner = mntns_owner,
};
fs: move namespace sysctls and declare fs base directory This moves the namespace sysctls to its own file as part of the kernel/sysctl.c spring cleaning Since we have now removed all sysctls for "fs", we now have to declare it on the filesystem code, we do that using the new helper, which reduces boiler plate code. We rename init_fs_shared_sysctls() to init_fs_sysctls() to reflect that now fs/sysctls.c is taking on the burden of being the first to register the base directory as well. Lastly, since init code will load in the order in which we link it we have to move the sysctl code to be linked in early, so that its early init routine runs prior to other fs code. This way, other filesystem code can register their own sysctls using the helpers after this: * register_sysctl_init() * register_sysctl() Link: https://lkml.kernel.org/r/20211129211943.640266-3-mcgrof@kernel.org Signed-off-by: Luis Chamberlain <mcgrof@kernel.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: Antti Palosaari <crope@iki.fi> Cc: Christian Brauner <christian.brauner@ubuntu.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Eric Biederman <ebiederm@xmission.com> Cc: Eric Biggers <ebiggers@google.com> Cc: Iurii Zaikin <yzaikin@google.com> Cc: Kees Cook <keescook@chromium.org> Cc: Lukas Middendorf <kernel@tuxforce.de> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: "Naveen N. Rao" <naveen.n.rao@linux.ibm.com> Cc: Stephen Kitt <steve@sk2.org> Cc: Xiaoming Ni <nixiaoming@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-01-22 06:13:27 +00:00
#ifdef CONFIG_SYSCTL
static struct ctl_table fs_namespace_sysctls[] = {
{
.procname = "mount-max",
.data = &sysctl_mount_max,
.maxlen = sizeof(unsigned int),
.mode = 0644,
.proc_handler = proc_dointvec_minmax,
.extra1 = SYSCTL_ONE,
},
};
static int __init init_fs_namespace_sysctls(void)
{
register_sysctl_init("fs", fs_namespace_sysctls);
return 0;
}
fs_initcall(init_fs_namespace_sysctls);
#endif /* CONFIG_SYSCTL */