Documentation/sphinx: add basic working Sphinx configuration and build
Add basic configuration and makefile to build documentation from any
.rst files under Documentation using Sphinx. For starters, there's just
the placeholder index.rst.
At the top level Makefile, hook Sphinx documentation targets alongside
(but independent of) the DocBook toolchain, having both be run on the
various 'make *docs' targets.
All Sphinx processing is placed into Documentation/Makefile.sphinx. Both
that and the Documentation/DocBook/Makefile are now expected to handle
all the documentation targets, explicitly ignoring them if they're not
relevant for that particular toolchain. The changes to the existing
DocBook Makefile are kept minimal.
There is graceful handling of missing Sphinx and rst2pdf (which is
needed for pdf output) by checking for the tool and python module,
respectively, with informative messages to the user.
If the Read the Docs theme (sphinx_rtd_theme) is available, use it, but
otherwise gracefully fall back to the Sphinx default theme, with an
informative message to the user, and slightly less pretty HTML output.
Sphinx can now handle htmldocs, pdfdocs (if rst2pdf is available),
epubdocs and xmldocs targets. The output documents are written into per
output type subdirectories under Documentation/output.
Finally, you can pass options to sphinx-build using the SPHINXBUILD make
variable. For example, 'make SPHINXOPTS=-v htmldocs' for more verbose
output from Sphinx.
This is based on the original work by Jonathan Corbet, but he probably
wouldn't recognize this as his own anymore.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2016-05-19 12:14:05 +00:00
# -*- makefile -*-
# Makefile for Sphinx documentation
#
# You can set these variables from the command line.
SPHINXBUILD = sphinx-build
SPHINXOPTS =
PAPER =
BUILDDIR = $( obj) /output
# User-friendly check for sphinx-build
HAVE_SPHINX := $( shell if which $( SPHINXBUILD) >/dev/null 2>& 1; then echo 1; else echo 0; fi )
i f e q ( $( HAVE_SPHINX ) , 0 )
.DEFAULT :
$( warning The '$(SPHINXBUILD)' command was not found. Make sure you have Sphinx installed and in PATH, or set the SPHINXBUILD make variable to point to the full path of the '$(SPHINXBUILD)' executable.)
@echo " SKIP Sphinx $@ target. "
2016-07-01 12:24:44 +00:00
e l s e i f n e q ( $( DOCBOOKS ) , )
# Skip Sphinx build if the user explicitly requested DOCBOOKS.
.DEFAULT :
@echo " SKIP Sphinx $@ target (DOCBOOKS specified). "
Documentation/sphinx: add basic working Sphinx configuration and build
Add basic configuration and makefile to build documentation from any
.rst files under Documentation using Sphinx. For starters, there's just
the placeholder index.rst.
At the top level Makefile, hook Sphinx documentation targets alongside
(but independent of) the DocBook toolchain, having both be run on the
various 'make *docs' targets.
All Sphinx processing is placed into Documentation/Makefile.sphinx. Both
that and the Documentation/DocBook/Makefile are now expected to handle
all the documentation targets, explicitly ignoring them if they're not
relevant for that particular toolchain. The changes to the existing
DocBook Makefile are kept minimal.
There is graceful handling of missing Sphinx and rst2pdf (which is
needed for pdf output) by checking for the tool and python module,
respectively, with informative messages to the user.
If the Read the Docs theme (sphinx_rtd_theme) is available, use it, but
otherwise gracefully fall back to the Sphinx default theme, with an
informative message to the user, and slightly less pretty HTML output.
Sphinx can now handle htmldocs, pdfdocs (if rst2pdf is available),
epubdocs and xmldocs targets. The output documents are written into per
output type subdirectories under Documentation/output.
Finally, you can pass options to sphinx-build using the SPHINXBUILD make
variable. For example, 'make SPHINXOPTS=-v htmldocs' for more verbose
output from Sphinx.
This is based on the original work by Jonathan Corbet, but he probably
wouldn't recognize this as his own anymore.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2016-05-19 12:14:05 +00:00
e l s e # HAVE_SPHINX
# User-friendly check for rst2pdf
HAVE_RST2PDF := $( shell if python -c "import rst2pdf" >/dev/null 2>& 1; then echo 1; else echo 0; fi )
# Internal variables.
PAPEROPT_a4 = -D latex_paper_size = a4
PAPEROPT_letter = -D latex_paper_size = letter
2016-05-20 08:51:47 +00:00
KERNELDOC = $( srctree) /scripts/kernel-doc
KERNELDOC_CONF = -D kerneldoc_srctree = $( srctree) -D kerneldoc_bin = $( KERNELDOC)
2016-05-28 12:25:41 +00:00
ALLSPHINXOPTS = -D version = $( KERNELVERSION) -D release = $( KERNELRELEASE) -d $( BUILDDIR) /.doctrees $( KERNELDOC_CONF) $( PAPEROPT_$( PAPER) ) -c $( srctree) /$( src) $( SPHINXOPTS) $( srctree) /$( src)
Documentation/sphinx: add basic working Sphinx configuration and build
Add basic configuration and makefile to build documentation from any
.rst files under Documentation using Sphinx. For starters, there's just
the placeholder index.rst.
At the top level Makefile, hook Sphinx documentation targets alongside
(but independent of) the DocBook toolchain, having both be run on the
various 'make *docs' targets.
All Sphinx processing is placed into Documentation/Makefile.sphinx. Both
that and the Documentation/DocBook/Makefile are now expected to handle
all the documentation targets, explicitly ignoring them if they're not
relevant for that particular toolchain. The changes to the existing
DocBook Makefile are kept minimal.
There is graceful handling of missing Sphinx and rst2pdf (which is
needed for pdf output) by checking for the tool and python module,
respectively, with informative messages to the user.
If the Read the Docs theme (sphinx_rtd_theme) is available, use it, but
otherwise gracefully fall back to the Sphinx default theme, with an
informative message to the user, and slightly less pretty HTML output.
Sphinx can now handle htmldocs, pdfdocs (if rst2pdf is available),
epubdocs and xmldocs targets. The output documents are written into per
output type subdirectories under Documentation/output.
Finally, you can pass options to sphinx-build using the SPHINXBUILD make
variable. For example, 'make SPHINXOPTS=-v htmldocs' for more verbose
output from Sphinx.
This is based on the original work by Jonathan Corbet, but he probably
wouldn't recognize this as his own anymore.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2016-05-19 12:14:05 +00:00
# the i18n builder cannot share the environment and doctrees with the others
I18NSPHINXOPTS = $( PAPEROPT_$( PAPER) ) $( SPHINXOPTS) .
quiet_cmd_sphinx = SPHINX $@
cmd_sphinx = $( SPHINXBUILD) -b $2 $( ALLSPHINXOPTS) $( BUILDDIR) /$2
htmldocs :
$( call cmd,sphinx,html)
pdfdocs :
i f e q ( $( HAVE_RST 2PDF ) , 0 )
$( warning The Python 'rst2pdf' module was not found. Make sure you have the module installed to produce PDF output.)
@echo " SKIP Sphinx $@ target. "
e l s e # HAVE_RST2PDF
$( call cmd,sphinx,pdf)
e n d i f # HAVE_RST2PDF
epubdocs :
$( call cmd,sphinx,epub)
xmldocs :
$( call cmd,sphinx,xml)
# no-ops for the Sphinx toolchain
sgmldocs :
psdocs :
mandocs :
installmandocs :
2016-07-01 12:03:34 +00:00
cleanmediadocs :
Documentation/sphinx: add basic working Sphinx configuration and build
Add basic configuration and makefile to build documentation from any
.rst files under Documentation using Sphinx. For starters, there's just
the placeholder index.rst.
At the top level Makefile, hook Sphinx documentation targets alongside
(but independent of) the DocBook toolchain, having both be run on the
various 'make *docs' targets.
All Sphinx processing is placed into Documentation/Makefile.sphinx. Both
that and the Documentation/DocBook/Makefile are now expected to handle
all the documentation targets, explicitly ignoring them if they're not
relevant for that particular toolchain. The changes to the existing
DocBook Makefile are kept minimal.
There is graceful handling of missing Sphinx and rst2pdf (which is
needed for pdf output) by checking for the tool and python module,
respectively, with informative messages to the user.
If the Read the Docs theme (sphinx_rtd_theme) is available, use it, but
otherwise gracefully fall back to the Sphinx default theme, with an
informative message to the user, and slightly less pretty HTML output.
Sphinx can now handle htmldocs, pdfdocs (if rst2pdf is available),
epubdocs and xmldocs targets. The output documents are written into per
output type subdirectories under Documentation/output.
Finally, you can pass options to sphinx-build using the SPHINXBUILD make
variable. For example, 'make SPHINXOPTS=-v htmldocs' for more verbose
output from Sphinx.
This is based on the original work by Jonathan Corbet, but he probably
wouldn't recognize this as his own anymore.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2016-05-19 12:14:05 +00:00
cleandocs :
$( Q) rm -rf $( BUILDDIR)
2016-06-22 12:41:48 +00:00
dochelp :
@echo ' Linux kernel internal documentation in different formats (Sphinx):'
@echo ' htmldocs - HTML'
@echo ' pdfdocs - PDF'
@echo ' epubdocs - EPUB'
@echo ' xmldocs - XML'
@echo ' cleandocs - clean all generated files'
Documentation/sphinx: add basic working Sphinx configuration and build
Add basic configuration and makefile to build documentation from any
.rst files under Documentation using Sphinx. For starters, there's just
the placeholder index.rst.
At the top level Makefile, hook Sphinx documentation targets alongside
(but independent of) the DocBook toolchain, having both be run on the
various 'make *docs' targets.
All Sphinx processing is placed into Documentation/Makefile.sphinx. Both
that and the Documentation/DocBook/Makefile are now expected to handle
all the documentation targets, explicitly ignoring them if they're not
relevant for that particular toolchain. The changes to the existing
DocBook Makefile are kept minimal.
There is graceful handling of missing Sphinx and rst2pdf (which is
needed for pdf output) by checking for the tool and python module,
respectively, with informative messages to the user.
If the Read the Docs theme (sphinx_rtd_theme) is available, use it, but
otherwise gracefully fall back to the Sphinx default theme, with an
informative message to the user, and slightly less pretty HTML output.
Sphinx can now handle htmldocs, pdfdocs (if rst2pdf is available),
epubdocs and xmldocs targets. The output documents are written into per
output type subdirectories under Documentation/output.
Finally, you can pass options to sphinx-build using the SPHINXBUILD make
variable. For example, 'make SPHINXOPTS=-v htmldocs' for more verbose
output from Sphinx.
This is based on the original work by Jonathan Corbet, but he probably
wouldn't recognize this as his own anymore.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2016-05-19 12:14:05 +00:00
e n d i f # HAVE_SPHINX
