2008-10-30 14:57:05 +00:00
|
|
|
menuconfig REGULATOR
|
2008-04-30 16:13:42 +00:00
|
|
|
bool "Voltage and Current Regulator Support"
|
|
|
|
|
help
|
|
|
|
|
Generic Voltage and Current Regulator support.
|
|
|
|
|
|
|
|
|
|
This framework is designed to provide a generic interface to voltage
|
|
|
|
|
and current regulators within the Linux kernel. It's intended to
|
|
|
|
|
provide voltage and current control to client or consumer drivers and
|
|
|
|
|
also provide status information to user space applications through a
|
|
|
|
|
sysfs interface.
|
|
|
|
|
|
|
|
|
|
The intention is to allow systems to dynamically control regulator
|
|
|
|
|
output in order to save power and prolong battery life. This applies
|
|
|
|
|
to both voltage regulators (where voltage output is controllable) and
|
|
|
|
|
current sinks (where current output is controllable).
|
|
|
|
|
|
|
|
|
|
This framework safely compiles out if not selected so that client
|
|
|
|
|
drivers can still be used in systems with no software controllable
|
|
|
|
|
regulators.
|
|
|
|
|
|
|
|
|
|
If unsure, say no.
|
|
|
|
|
|
2012-06-20 10:08:43 +00:00
|
|
|
|
2008-10-30 14:57:05 +00:00
|
|
|
if REGULATOR
|
|
|
|
|
|
2008-04-30 16:13:42 +00:00
|
|
|
config REGULATOR_DEBUG
|
|
|
|
|
bool "Regulator debug support"
|
|
|
|
|
help
|
|
|
|
|
Say yes here to enable debugging support.
|
|
|
|
|
|
|
|
|
|
config REGULATOR_FIXED_VOLTAGE
|
2009-01-19 13:37:05 +00:00
|
|
|
tristate "Fixed voltage regulator support"
|
|
|
|
|
help
|
|
|
|
|
This driver provides support for fixed voltage regulators,
|
|
|
|
|
useful for systems which use a combination of software
|
|
|
|
|
managed regulators and simple non-configurable regulators.
|
2008-04-30 16:13:42 +00:00
|
|
|
|
|
|
|
|
config REGULATOR_VIRTUAL_CONSUMER
|
|
|
|
|
tristate "Virtual regulator consumer support"
|
|
|
|
|
help
|
|
|
|
|
This driver provides a virtual consumer for the voltage and
|
2012-07-26 14:07:23 +00:00
|
|
|
current regulator API which provides sysfs controls for
|
|
|
|
|
configuring the supplies requested. This is mainly useful
|
|
|
|
|
for test purposes.
|
2008-04-30 16:13:42 +00:00
|
|
|
|
2012-07-26 14:07:23 +00:00
|
|
|
If unsure, say no.
|
2008-04-30 16:13:42 +00:00
|
|
|
|
2009-04-26 13:49:39 +00:00
|
|
|
config REGULATOR_USERSPACE_CONSUMER
|
|
|
|
|
tristate "Userspace regulator consumer support"
|
|
|
|
|
help
|
|
|
|
|
There are some classes of devices that are controlled entirely
|
2009-09-05 00:59:14 +00:00
|
|
|
from user space. Userspace consumer driver provides ability to
|
2009-04-26 13:49:39 +00:00
|
|
|
control power supplies for such devices.
|
|
|
|
|
|
2012-07-26 14:07:23 +00:00
|
|
|
If unsure, say no.
|
2009-04-26 13:49:39 +00:00
|
|
|
|
2013-07-18 03:07:03 +00:00
|
|
|
config REGULATOR_88PM800
|
|
|
|
|
tristate "Marvell 88PM800 Power regulators"
|
2013-07-19 01:17:53 +00:00
|
|
|
depends on MFD_88PM800
|
2013-07-18 03:07:03 +00:00
|
|
|
help
|
|
|
|
|
This driver supports Marvell 88PM800 voltage regulator chips.
|
|
|
|
|
It delivers digitally programmable output,
|
|
|
|
|
the voltage is programmed via I2C interface.
|
|
|
|
|
It's suitable to support PXA988 chips to control VCC_MAIN and
|
|
|
|
|
various voltages.
|
|
|
|
|
|
2013-07-05 19:45:22 +00:00
|
|
|
config REGULATOR_88PM8607
|
2013-07-29 15:49:46 +00:00
|
|
|
tristate "Marvell 88PM8607 Power regulators"
|
2013-07-05 19:45:22 +00:00
|
|
|
depends on MFD_88PM860X=y
|
regulator: Add driver for gpio-controlled regulators
This patch adds support for regulators that can be controlled via gpios.
Examples for such regulators are the TI-tps65024x voltage regulators
with 4 fixed and 1 runtime-switchable voltage regulators
or the TI-bq240XX charger regulators.
The number of controlling gpios is not limited, the mapping between
voltage/current and target gpio state is done via the states map
and the driver can be used for either voltage or current regulators.
A mapping for a regulator with two GPIOs could look like:
gpios = {
{ .gpio = GPIO1, .flags = GPIOF_OUT_INIT_HIGH, .label = "gpio name 1" },
{ .gpio = GPIO2, .flags = GPIOF_OUT_INIT_LOW, .label = "gpio name 2" },
}
The flags element of the gpios array determines the initial state of
the gpio, set during probe. The initial state of the regulator is also
calculated from these values
states = {
{ .value = volt_or_cur1, .gpios = (0 << 1) | (0 << 0) },
{ .value = volt_or_cur2, .gpios = (0 << 1) | (1 << 0) },
{ .value = volt_or_cur3, .gpios = (1 << 1) | (0 << 0) },
{ .value = volt_or_cur4, .gpios = (1 << 1) | (1 << 0) },
}
The target-state for the n-th gpio is determined by the n-th bit
in the bitfield of the target-value.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-05 10:27:05 +00:00
|
|
|
help
|
2013-07-05 19:45:22 +00:00
|
|
|
This driver supports 88PM8607 voltage regulator chips.
|
regulator: Add driver for gpio-controlled regulators
This patch adds support for regulators that can be controlled via gpios.
Examples for such regulators are the TI-tps65024x voltage regulators
with 4 fixed and 1 runtime-switchable voltage regulators
or the TI-bq240XX charger regulators.
The number of controlling gpios is not limited, the mapping between
voltage/current and target gpio state is done via the states map
and the driver can be used for either voltage or current regulators.
A mapping for a regulator with two GPIOs could look like:
gpios = {
{ .gpio = GPIO1, .flags = GPIOF_OUT_INIT_HIGH, .label = "gpio name 1" },
{ .gpio = GPIO2, .flags = GPIOF_OUT_INIT_LOW, .label = "gpio name 2" },
}
The flags element of the gpios array determines the initial state of
the gpio, set during probe. The initial state of the regulator is also
calculated from these values
states = {
{ .value = volt_or_cur1, .gpios = (0 << 1) | (0 << 0) },
{ .value = volt_or_cur2, .gpios = (0 << 1) | (1 << 0) },
{ .value = volt_or_cur3, .gpios = (1 << 1) | (0 << 0) },
{ .value = volt_or_cur4, .gpios = (1 << 1) | (1 << 0) },
}
The target-state for the n-th gpio is determined by the n-th bit
in the bitfield of the target-value.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-05 10:27:05 +00:00
|
|
|
|
2013-12-24 02:34:28 +00:00
|
|
|
config REGULATOR_ACT8865
|
|
|
|
|
tristate "Active-semi act8865 voltage regulator"
|
|
|
|
|
depends on I2C
|
|
|
|
|
select REGMAP_I2C
|
|
|
|
|
help
|
|
|
|
|
This driver controls a active-semi act8865 voltage output
|
|
|
|
|
regulator via I2C bus.
|
|
|
|
|
|
2012-02-22 01:29:16 +00:00
|
|
|
config REGULATOR_AD5398
|
|
|
|
|
tristate "Analog Devices AD5398/AD5821 regulators"
|
|
|
|
|
depends on I2C
|
2008-07-11 15:28:06 +00:00
|
|
|
help
|
2012-02-22 01:29:16 +00:00
|
|
|
This driver supports AD5398 and AD5821 current regulator chips.
|
|
|
|
|
If building into module, its name is ad5398.ko.
|
|
|
|
|
|
2013-07-05 19:45:22 +00:00
|
|
|
config REGULATOR_ANATOP
|
|
|
|
|
tristate "Freescale i.MX on-chip ANATOP LDO regulators"
|
|
|
|
|
depends on MFD_SYSCON
|
|
|
|
|
help
|
|
|
|
|
Say y here to support Freescale i.MX on-chip ANATOP LDOs
|
|
|
|
|
regulators. It is recommended that this option be
|
|
|
|
|
enabled on i.MX6 platform.
|
|
|
|
|
|
2012-02-22 01:29:16 +00:00
|
|
|
config REGULATOR_AAT2870
|
|
|
|
|
tristate "AnalogicTech AAT2870 Regulators"
|
|
|
|
|
depends on MFD_AAT2870_CORE
|
|
|
|
|
help
|
|
|
|
|
If you have a AnalogicTech AAT2870 say Y to enable the
|
|
|
|
|
regulator driver.
|
|
|
|
|
|
2013-07-05 19:45:22 +00:00
|
|
|
config REGULATOR_AB3100
|
|
|
|
|
tristate "ST-Ericsson AB3100 Regulator functions"
|
|
|
|
|
depends on AB3100_CORE
|
|
|
|
|
default y if AB3100_CORE
|
|
|
|
|
help
|
|
|
|
|
These regulators correspond to functionality in the
|
|
|
|
|
AB3100 analog baseband dealing with power regulators
|
|
|
|
|
for the system.
|
|
|
|
|
|
|
|
|
|
config REGULATOR_AB8500
|
|
|
|
|
bool "ST-Ericsson AB8500 Power Regulators"
|
|
|
|
|
depends on AB8500_CORE
|
|
|
|
|
help
|
|
|
|
|
This driver supports the regulators found on the ST-Ericsson mixed
|
|
|
|
|
signal AB8500 PMIC
|
|
|
|
|
|
2012-06-14 17:14:00 +00:00
|
|
|
config REGULATOR_ARIZONA
|
|
|
|
|
tristate "Wolfson Arizona class devices"
|
|
|
|
|
depends on MFD_ARIZONA
|
2013-01-10 19:14:11 +00:00
|
|
|
depends on SND_SOC
|
2012-06-14 17:14:00 +00:00
|
|
|
help
|
|
|
|
|
Support for the regulators found on Wolfson Arizona class
|
|
|
|
|
devices.
|
|
|
|
|
|
2013-07-05 19:45:22 +00:00
|
|
|
config REGULATOR_AS3711
|
|
|
|
|
tristate "AS3711 PMIC"
|
|
|
|
|
depends on MFD_AS3711
|
|
|
|
|
help
|
|
|
|
|
This driver provides support for the voltage regulators on the
|
|
|
|
|
AS3711 PMIC
|
|
|
|
|
|
2013-09-20 12:30:13 +00:00
|
|
|
config REGULATOR_AS3722
|
|
|
|
|
tristate "AMS AS3722 PMIC Regulators"
|
|
|
|
|
depends on MFD_AS3722
|
|
|
|
|
help
|
|
|
|
|
This driver provides support for the voltage regulators on the
|
|
|
|
|
AS3722 PMIC. This will enable support for all the software
|
|
|
|
|
controllable DCDC/LDO regulators.
|
|
|
|
|
|
2014-04-11 09:38:10 +00:00
|
|
|
config REGULATOR_AXP20X
|
|
|
|
|
tristate "X-POWERS AXP20X PMIC Regulators"
|
|
|
|
|
depends on MFD_AXP20X
|
|
|
|
|
help
|
|
|
|
|
This driver provides support for the voltage regulators on the
|
|
|
|
|
AXP20X PMIC.
|
|
|
|
|
|
2014-03-11 15:46:13 +00:00
|
|
|
config REGULATOR_BCM590XX
|
|
|
|
|
tristate "Broadcom BCM590xx PMU Regulators"
|
|
|
|
|
depends on MFD_BCM590XX
|
|
|
|
|
help
|
|
|
|
|
This driver provides support for the voltage regulators on the
|
|
|
|
|
BCM590xx PMUs. This will enable support for the software
|
|
|
|
|
controllable LDO/Switching regulators.
|
|
|
|
|
|
2012-02-22 01:29:16 +00:00
|
|
|
config REGULATOR_DA903X
|
|
|
|
|
tristate "Dialog Semiconductor DA9030/DA9034 regulators"
|
|
|
|
|
depends on PMIC_DA903X
|
|
|
|
|
help
|
|
|
|
|
Say y here to support the BUCKs and LDOs regulators found on
|
|
|
|
|
Dialog Semiconductor DA9030/DA9034 PMIC.
|
|
|
|
|
|
|
|
|
|
config REGULATOR_DA9052
|
|
|
|
|
tristate "Dialog Semiconductor DA9052/DA9053 regulators"
|
|
|
|
|
depends on PMIC_DA9052
|
|
|
|
|
help
|
|
|
|
|
This driver supports the voltage regulators of DA9052-BC and
|
|
|
|
|
DA9053-AA/Bx PMIC.
|
|
|
|
|
|
2012-11-01 08:27:56 +00:00
|
|
|
config REGULATOR_DA9055
|
|
|
|
|
tristate "Dialog Semiconductor DA9055 regulators"
|
|
|
|
|
depends on MFD_DA9055
|
|
|
|
|
help
|
|
|
|
|
Say y here to support the BUCKs and LDOs regulators found on
|
|
|
|
|
Dialog Semiconductor DA9055 PMIC.
|
|
|
|
|
|
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
|
|
|
will be called da9055-regulator.
|
|
|
|
|
|
regulator: da9063: Add Dialog DA9063 voltage regulators support.
The driver adds support for the following DA9063 PMIC regulators:
- 11x LDOs (named LDO1 - LDO11),
- 6x buck converters (BCORE1, BCORE2, BPRO, BMEM, BIO, BPERI),
Regulators provide following operations:
- REGULATOR_CHANGE_STATUS and REGULATOR_CHANGE_VOLTAGE for all regulators,
- REGULATOR_CHANGE_MODE for LDOs and buck converters, where:
- LDOs allow REGULATOR_MODE_NORMAL and REGULATOR_MODE_STANDBY,
- buck converters allow REGULATOR_MODE_FAST, REGULATOR_MODE_NORMAL
and REGULATOR_MODE_STANDBY,
- REGULATOR_CHANGE_CURRENT for buck converters (current limits).
The driver generates REGULATOR_EVENT_OVER_CURRENT for LDO3, LDO4, LDO7, LDO8
and LDO11.
Internally, PMIC provides two voltage configurations for normal and suspend
system state for each regulator. The driver switches between those on
suspend/wake-up to provide quick and fluent output voltage change.
This driver requires MFD core driver for operation.
Signed-off-by: Krystian Garbaciak <krystian.garbaciak@diasemi.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-29 17:00:45 +00:00
|
|
|
config REGULATOR_DA9063
|
|
|
|
|
tristate "Dialog Semiconductor DA9063 regulators"
|
|
|
|
|
depends on MFD_DA9063
|
|
|
|
|
help
|
|
|
|
|
Say y here to support the BUCKs and LDOs regulators found on
|
|
|
|
|
DA9063 PMICs.
|
|
|
|
|
|
|
|
|
|
This driver can also be built as a module. If so, the module
|
|
|
|
|
will be called da9063-regulator.
|
|
|
|
|
|
2013-08-06 14:30:48 +00:00
|
|
|
config REGULATOR_DA9210
|
|
|
|
|
tristate "Dialog Semiconductor DA9210 regulator"
|
|
|
|
|
depends on I2C
|
|
|
|
|
select REGMAP_I2C
|
|
|
|
|
help
|
|
|
|
|
Say y here to support for the Dialog Semiconductor DA9210.
|
|
|
|
|
The DA9210 is a multi-phase synchronous step down
|
|
|
|
|
converter 12A DC-DC Buck controlled through an I2C
|
|
|
|
|
interface.
|
|
|
|
|
|
2013-07-05 19:45:22 +00:00
|
|
|
config REGULATOR_DBX500_PRCMU
|
|
|
|
|
bool
|
|
|
|
|
|
|
|
|
|
config REGULATOR_DB8500_PRCMU
|
|
|
|
|
bool "ST-Ericsson DB8500 Voltage Domain Regulators"
|
|
|
|
|
depends on MFD_DB8500_PRCMU
|
|
|
|
|
select REGULATOR_DBX500_PRCMU
|
|
|
|
|
help
|
|
|
|
|
This driver supports the voltage domain regulators controlled by the
|
|
|
|
|
DB8500 PRCMU
|
|
|
|
|
|
2012-09-08 10:52:18 +00:00
|
|
|
config REGULATOR_FAN53555
|
|
|
|
|
tristate "Fairchild FAN53555 Regulator"
|
|
|
|
|
depends on I2C
|
|
|
|
|
select REGMAP_I2C
|
|
|
|
|
help
|
|
|
|
|
This driver supports Fairchild FAN53555 Digitally Programmable
|
|
|
|
|
TinyBuck Regulator. The FAN53555 is a step-down switching voltage
|
|
|
|
|
regulator that delivers a digitally programmable output from an
|
|
|
|
|
input voltage supply of 2.5V to 5.5V. The output voltage is
|
|
|
|
|
programmed through an I2C interface.
|
|
|
|
|
|
2013-07-05 19:45:22 +00:00
|
|
|
config REGULATOR_GPIO
|
|
|
|
|
tristate "GPIO regulator support"
|
|
|
|
|
depends on GPIOLIB
|
2012-03-14 02:29:12 +00:00
|
|
|
help
|
2013-07-05 19:45:22 +00:00
|
|
|
This driver provides support for regulators that can be
|
|
|
|
|
controlled via gpios.
|
|
|
|
|
It is capable of supporting current and voltage regulators
|
|
|
|
|
and the platform has to provide a mapping of GPIO-states
|
|
|
|
|
to target volts/amps.
|
2012-03-14 02:29:12 +00:00
|
|
|
|
2013-07-05 19:45:22 +00:00
|
|
|
config REGULATOR_ISL6271A
|
|
|
|
|
tristate "Intersil ISL6271A Power regulator"
|
|
|
|
|
depends on I2C
|
|
|
|
|
help
|
|
|
|
|
This driver supports ISL6271A voltage regulator chip.
|
2012-02-22 01:29:16 +00:00
|
|
|
|
2013-07-05 19:45:22 +00:00
|
|
|
config REGULATOR_LP3971
|
|
|
|
|
tristate "National Semiconductors LP3971 PMIC regulator driver"
|
|
|
|
|
depends on I2C
|
2012-02-22 01:29:16 +00:00
|
|
|
help
|
2013-07-05 19:45:22 +00:00
|
|
|
Say Y here to support the voltage regulators and convertors
|
|
|
|
|
on National Semiconductors LP3971 PMIC
|
2012-02-22 01:29:16 +00:00
|
|
|
|
2013-07-05 19:45:22 +00:00
|
|
|
config REGULATOR_LP3972
|
|
|
|
|
tristate "National Semiconductors LP3972 PMIC regulator driver"
|
|
|
|
|
depends on I2C
|
2012-02-22 01:29:16 +00:00
|
|
|
help
|
2013-07-05 19:45:22 +00:00
|
|
|
Say Y here to support the voltage regulators and convertors
|
|
|
|
|
on National Semiconductors LP3972 PMIC
|
2012-02-22 01:29:16 +00:00
|
|
|
|
2013-07-05 19:45:22 +00:00
|
|
|
config REGULATOR_LP872X
|
2013-07-29 15:49:46 +00:00
|
|
|
tristate "TI/National Semiconductor LP8720/LP8725 voltage regulators"
|
2013-08-30 14:13:44 +00:00
|
|
|
depends on I2C
|
2013-07-05 19:45:22 +00:00
|
|
|
select REGMAP_I2C
|
|
|
|
|
help
|
|
|
|
|
This driver supports LP8720/LP8725 PMIC
|
|
|
|
|
|
|
|
|
|
config REGULATOR_LP8755
|
|
|
|
|
tristate "TI LP8755 High Performance PMU driver"
|
2012-02-22 01:29:16 +00:00
|
|
|
depends on I2C
|
2013-07-05 19:45:22 +00:00
|
|
|
select REGMAP_I2C
|
2012-02-22 01:29:16 +00:00
|
|
|
help
|
2013-07-05 19:45:22 +00:00
|
|
|
This driver supports LP8755 High Performance PMU driver. This
|
|
|
|
|
chip contains six step-down DC/DC converters which can support
|
|
|
|
|
9 mode multiphase configuration.
|
2012-02-22 01:29:16 +00:00
|
|
|
|
2013-07-05 19:45:22 +00:00
|
|
|
config REGULATOR_LP8788
|
2013-07-29 15:49:46 +00:00
|
|
|
tristate "TI LP8788 Power Regulators"
|
2013-07-05 19:45:22 +00:00
|
|
|
depends on MFD_LP8788
|
2012-02-22 01:29:16 +00:00
|
|
|
help
|
2013-07-05 19:45:22 +00:00
|
|
|
This driver supports LP8788 voltage regulator chip.
|
2008-07-11 15:28:06 +00:00
|
|
|
|
2014-05-26 08:38:16 +00:00
|
|
|
config REGULATOR_LTC3589
|
2014-05-27 05:51:49 +00:00
|
|
|
tristate "LTC3589 8-output voltage regulator"
|
|
|
|
|
depends on I2C
|
|
|
|
|
select REGMAP_I2C
|
2014-05-26 08:38:16 +00:00
|
|
|
help
|
|
|
|
|
This enables support for the LTC3589, LTC3589-1, and LTC3589-2
|
|
|
|
|
8-output regulators controlled via I2C.
|
|
|
|
|
|
2013-12-06 11:32:13 +00:00
|
|
|
config REGULATOR_MAX14577
|
2014-04-14 09:17:20 +00:00
|
|
|
tristate "Maxim 14577/77836 regulator"
|
2013-12-06 11:32:13 +00:00
|
|
|
depends on MFD_MAX14577
|
|
|
|
|
help
|
2014-04-14 09:17:20 +00:00
|
|
|
This driver controls a Maxim MAX14577/77836 regulator via I2C bus.
|
|
|
|
|
The MAX14577 regulators include safeout LDO and charger current
|
|
|
|
|
regulator. The MAX77836 has two additional LDOs.
|
2013-12-06 11:32:13 +00:00
|
|
|
|
2009-04-23 18:10:43 +00:00
|
|
|
config REGULATOR_MAX1586
|
|
|
|
|
tristate "Maxim 1586/1587 voltage regulator"
|
|
|
|
|
depends on I2C
|
|
|
|
|
help
|
|
|
|
|
This driver controls a Maxim 1586 or 1587 voltage output
|
|
|
|
|
regulator via I2C bus. The provided regulator is suitable
|
|
|
|
|
for PXA27x chips to control VCC_CORE and VCC_USIM voltages.
|
|
|
|
|
|
2010-01-25 15:24:09 +00:00
|
|
|
config REGULATOR_MAX8649
|
|
|
|
|
tristate "Maxim 8649 voltage regulator"
|
|
|
|
|
depends on I2C
|
2011-10-24 13:26:26 +00:00
|
|
|
select REGMAP_I2C
|
2010-01-25 15:24:09 +00:00
|
|
|
help
|
|
|
|
|
This driver controls a Maxim 8649 voltage output regulator via
|
|
|
|
|
I2C bus.
|
|
|
|
|
|
2009-09-25 07:39:26 +00:00
|
|
|
config REGULATOR_MAX8660
|
|
|
|
|
tristate "Maxim 8660/8661 voltage regulator"
|
|
|
|
|
depends on I2C
|
|
|
|
|
help
|
|
|
|
|
This driver controls a Maxim 8660/8661 voltage output
|
|
|
|
|
regulator via I2C bus.
|
|
|
|
|
|
2012-08-09 20:24:34 +00:00
|
|
|
config REGULATOR_MAX8907
|
|
|
|
|
tristate "Maxim 8907 voltage regulator"
|
|
|
|
|
depends on MFD_MAX8907
|
|
|
|
|
help
|
|
|
|
|
This driver controls a Maxim 8907 voltage output regulator
|
|
|
|
|
via I2C bus. The provided regulator is suitable for Tegra
|
|
|
|
|
chip to control Step-Down DC-DC and LDOs.
|
|
|
|
|
|
2010-01-11 12:10:08 +00:00
|
|
|
config REGULATOR_MAX8925
|
|
|
|
|
tristate "Maxim MAX8925 Power Management IC"
|
|
|
|
|
depends on MFD_MAX8925
|
|
|
|
|
help
|
|
|
|
|
Say y here to support the voltage regulaltor of Maxim MAX8925 PMIC.
|
|
|
|
|
|
2010-08-20 05:43:56 +00:00
|
|
|
config REGULATOR_MAX8952
|
|
|
|
|
tristate "Maxim MAX8952 Power Management IC"
|
|
|
|
|
depends on I2C
|
|
|
|
|
help
|
|
|
|
|
This driver controls a Maxim 8952 voltage output regulator
|
|
|
|
|
via I2C bus. Maxim 8952 has one voltage output and supports 4 DVS
|
|
|
|
|
modes ranging from 0.77V to 1.40V by 0.01V steps.
|
|
|
|
|
|
2012-11-19 01:28:29 +00:00
|
|
|
config REGULATOR_MAX8973
|
|
|
|
|
tristate "Maxim MAX8973 voltage regulator "
|
|
|
|
|
depends on I2C
|
|
|
|
|
select REGMAP_I2C
|
|
|
|
|
help
|
|
|
|
|
The MAXIM MAX8973 high-efficiency. three phase, DC-DC step-down
|
|
|
|
|
switching regulator delievers up to 9A of output current. Each
|
|
|
|
|
phase operates at a 2MHz fixed frequency with a 120 deg shift
|
|
|
|
|
from the adjacent phase, allowing the use of small magnetic component.
|
|
|
|
|
|
regulator: MAX8997/8966 support
This patch supports PMIC/Regulator part of MAX8997/MAX8966 MFD.
In this initial release, selecting voltages or current-limit
and switching on/off the regulators are supported.
Controlling voltages for DVS with GPIOs is not implemented fully
and requires more considerations: it controls multiple bucks (selection
of 1, 2, and 5) at the same time with SET1~3 gpios. Thus, when DVS-GPIO
is activated, we lose the ability to control the voltage of a single
buck regulator independently; i.e., contolling a buck affects other two
bucks. Therefore, using the conventional regulator framework directly
might be problematic. However, in this driver, we try to choose
a setting without such side effect of affecting other regulators and
then try to choose a setting with the minimum side effect (the sum of
voltage changes in other regulators).
On the other hand, controlling all the three bucks simultenously based
on the voltage set table may help build cpufreq and similar system
more robust; i.e., all the three voltages are consistent every time
without glitches during transition.
Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-03-11 02:34:44 +00:00
|
|
|
config REGULATOR_MAX8997
|
|
|
|
|
tristate "Maxim 8997/8966 regulator"
|
|
|
|
|
depends on MFD_MAX8997
|
|
|
|
|
help
|
|
|
|
|
This driver controls a Maxim 8997/8966 regulator
|
|
|
|
|
via I2C bus. The provided regulator is suitable for S5PC110,
|
|
|
|
|
S5PV210, and Exynos-4 chips to control VCC_CORE and
|
|
|
|
|
VCC_USIM voltages.
|
|
|
|
|
|
2010-06-16 07:04:16 +00:00
|
|
|
config REGULATOR_MAX8998
|
|
|
|
|
tristate "Maxim 8998 voltage regulator"
|
2010-06-21 08:04:23 +00:00
|
|
|
depends on MFD_MAX8998
|
2010-06-16 07:04:16 +00:00
|
|
|
help
|
|
|
|
|
This driver controls a Maxim 8998 voltage output regulator
|
|
|
|
|
via I2C bus. The provided regulator is suitable for S3C6410
|
|
|
|
|
and S5PC1XX chips to control VCC_CORE and VCC_USIM voltages.
|
|
|
|
|
|
2012-06-01 04:17:14 +00:00
|
|
|
config REGULATOR_MAX77686
|
|
|
|
|
tristate "Maxim 77686 regulator"
|
|
|
|
|
depends on MFD_MAX77686
|
|
|
|
|
help
|
|
|
|
|
This driver controls a Maxim 77686 regulator
|
|
|
|
|
via I2C bus. The provided regulator is suitable for
|
|
|
|
|
Exynos-4 chips to control VARM and VINT voltages.
|
|
|
|
|
|
2013-06-25 01:08:38 +00:00
|
|
|
config REGULATOR_MAX77693
|
|
|
|
|
tristate "Maxim MAX77693 regulator"
|
|
|
|
|
depends on MFD_MAX77693
|
|
|
|
|
help
|
|
|
|
|
This driver controls a Maxim 77693 regulator via I2C bus.
|
|
|
|
|
The regulators include two LDOs, 'SAFEOUT1', 'SAFEOUT2'
|
|
|
|
|
and one current regulator 'CHARGER'. This is suitable for
|
|
|
|
|
Exynos-4x12 chips.
|
|
|
|
|
|
2013-07-05 19:45:22 +00:00
|
|
|
config REGULATOR_MC13XXX_CORE
|
|
|
|
|
tristate
|
2009-01-09 00:51:01 +00:00
|
|
|
|
2013-07-05 19:45:22 +00:00
|
|
|
config REGULATOR_MC13783
|
|
|
|
|
tristate "Freescale MC13783 regulator driver"
|
2013-12-14 13:03:10 +00:00
|
|
|
depends on MFD_MC13XXX
|
2013-07-05 19:45:22 +00:00
|
|
|
select REGULATOR_MC13XXX_CORE
|
2009-05-19 05:33:55 +00:00
|
|
|
help
|
2013-07-05 19:45:22 +00:00
|
|
|
Say y here to support the regulators found on the Freescale MC13783
|
|
|
|
|
PMIC.
|
2009-05-19 05:33:55 +00:00
|
|
|
|
2013-07-05 19:45:22 +00:00
|
|
|
config REGULATOR_MC13892
|
|
|
|
|
tristate "Freescale MC13892 regulator driver"
|
|
|
|
|
depends on MFD_MC13XXX
|
|
|
|
|
select REGULATOR_MC13XXX_CORE
|
2010-09-16 08:48:49 +00:00
|
|
|
help
|
2013-07-05 19:45:22 +00:00
|
|
|
Say y here to support the regulators found on the Freescale MC13892
|
|
|
|
|
PMIC.
|
2010-09-16 08:48:49 +00:00
|
|
|
|
2013-07-05 19:45:22 +00:00
|
|
|
config REGULATOR_PALMAS
|
|
|
|
|
tristate "TI Palmas PMIC Regulators"
|
|
|
|
|
depends on MFD_PALMAS
|
2012-06-19 07:08:22 +00:00
|
|
|
help
|
2013-07-05 19:45:22 +00:00
|
|
|
If you wish to control the regulators on the Palmas series of
|
|
|
|
|
chips say Y here. This will enable support for all the software
|
|
|
|
|
controllable SMPS/LDO regulators.
|
2012-06-19 07:08:22 +00:00
|
|
|
|
2013-07-05 19:45:22 +00:00
|
|
|
The regulators available on Palmas series chips vary depending
|
|
|
|
|
on the muxing. This is handled automatically in the driver by
|
|
|
|
|
reading the mux info from OTP.
|
2012-12-17 01:24:06 +00:00
|
|
|
|
2014-02-19 14:56:40 +00:00
|
|
|
config REGULATOR_PBIAS
|
|
|
|
|
tristate "PBIAS OMAP regulator driver"
|
|
|
|
|
depends on (ARCH_OMAP || COMPILE_TEST) && MFD_SYSCON
|
|
|
|
|
help
|
|
|
|
|
Say y here to support pbias regulator for mmc1:SD card i/o
|
|
|
|
|
on OMAP SoCs.
|
|
|
|
|
This driver provides support for OMAP pbias modelled
|
|
|
|
|
regulators.
|
|
|
|
|
|
2013-07-05 19:45:22 +00:00
|
|
|
config REGULATOR_PCAP
|
|
|
|
|
tristate "Motorola PCAP2 regulator driver"
|
|
|
|
|
depends on EZX_PCAP
|
2012-07-18 14:32:57 +00:00
|
|
|
help
|
2013-07-05 19:45:22 +00:00
|
|
|
This driver provides support for the voltage regulators of the
|
|
|
|
|
PCAP2 PMIC.
|
2012-07-18 14:32:57 +00:00
|
|
|
|
2012-02-22 01:29:16 +00:00
|
|
|
config REGULATOR_PCF50633
|
|
|
|
|
tristate "NXP PCF50633 regulator driver"
|
2012-07-26 14:07:23 +00:00
|
|
|
depends on MFD_PCF50633
|
2009-08-18 23:43:50 +00:00
|
|
|
help
|
2012-02-22 01:29:16 +00:00
|
|
|
Say Y here to support the voltage regulators and convertors
|
|
|
|
|
on PCF50633
|
2009-08-18 23:43:50 +00:00
|
|
|
|
2013-07-25 03:33:18 +00:00
|
|
|
config REGULATOR_PFUZE100
|
2014-03-05 10:02:43 +00:00
|
|
|
tristate "Freescale PFUZE100/PFUZE200 regulator driver"
|
2013-07-25 03:33:18 +00:00
|
|
|
depends on I2C
|
2013-07-29 04:08:01 +00:00
|
|
|
select REGMAP_I2C
|
2013-07-25 03:33:18 +00:00
|
|
|
help
|
2014-03-05 10:02:43 +00:00
|
|
|
Say y here to support the regulators found on the Freescale
|
|
|
|
|
PFUZE100/PFUZE200 PMIC.
|
2013-07-25 03:33:18 +00:00
|
|
|
|
2012-04-04 07:14:00 +00:00
|
|
|
config REGULATOR_RC5T583
|
|
|
|
|
tristate "RICOH RC5T583 Power regulators"
|
|
|
|
|
depends on MFD_RC5T583
|
|
|
|
|
help
|
|
|
|
|
Select this option to enable the power regulator of RICOH
|
|
|
|
|
PMIC RC5T583.
|
|
|
|
|
This driver supports the control of different power rails of device
|
|
|
|
|
through regulator interface. The device supports multiple DCDC/LDO
|
|
|
|
|
outputs which can be controlled by i2c communication.
|
|
|
|
|
|
2014-03-14 11:51:58 +00:00
|
|
|
config REGULATOR_S2MPA01
|
|
|
|
|
tristate "Samsung S2MPA01 voltage regulator"
|
|
|
|
|
depends on MFD_SEC_CORE
|
|
|
|
|
help
|
|
|
|
|
This driver controls Samsung S2MPA01 voltage output regulator
|
|
|
|
|
via I2C bus. S2MPA01 has 10 Bucks and 26 LDO outputs.
|
|
|
|
|
|
2012-07-11 12:08:17 +00:00
|
|
|
config REGULATOR_S2MPS11
|
2014-03-07 10:10:50 +00:00
|
|
|
tristate "Samsung S2MPS11/S2MPS14 voltage regulator"
|
2012-07-11 12:08:17 +00:00
|
|
|
depends on MFD_SEC_CORE
|
|
|
|
|
help
|
2014-03-07 10:10:50 +00:00
|
|
|
This driver supports a Samsung S2MPS11/S2MPS14 voltage output
|
|
|
|
|
regulator via I2C bus. The chip is comprised of high efficient Buck
|
|
|
|
|
converters including Dual-Phase Buck converter, Buck-Boost converter,
|
|
|
|
|
various LDOs.
|
2012-07-11 12:08:17 +00:00
|
|
|
|
2012-02-22 01:29:16 +00:00
|
|
|
config REGULATOR_S5M8767
|
|
|
|
|
tristate "Samsung S5M8767A voltage regulator"
|
2012-07-11 12:06:40 +00:00
|
|
|
depends on MFD_SEC_CORE
|
2010-12-14 06:00:55 +00:00
|
|
|
help
|
2012-02-22 01:29:16 +00:00
|
|
|
This driver supports a Samsung S5M8767A voltage output regulator
|
|
|
|
|
via I2C bus. S5M8767A have 9 Bucks and 28 LDOs output and
|
|
|
|
|
supports DVS mode with 8bits of output voltage control.
|
2010-12-14 06:00:55 +00:00
|
|
|
|
2014-03-21 10:21:36 +00:00
|
|
|
config REGULATOR_ST_PWM
|
|
|
|
|
tristate "STMicroelectronics PWM voltage regulator"
|
|
|
|
|
depends on ARCH_STI
|
|
|
|
|
help
|
|
|
|
|
This driver supports ST's PWM controlled voltage regulators.
|
|
|
|
|
|
2013-07-05 19:45:22 +00:00
|
|
|
config REGULATOR_TI_ABB
|
2013-07-29 15:49:46 +00:00
|
|
|
tristate "TI Adaptive Body Bias on-chip LDO"
|
2013-07-05 19:45:22 +00:00
|
|
|
depends on ARCH_OMAP
|
2012-05-15 06:48:59 +00:00
|
|
|
help
|
2013-07-05 19:45:22 +00:00
|
|
|
Select this option to support Texas Instruments' on-chip Adaptive Body
|
|
|
|
|
Bias (ABB) LDO regulators. It is recommended that this option be
|
|
|
|
|
enabled on required TI SoC. Certain Operating Performance Points
|
|
|
|
|
on TI SoCs may be unstable without enabling this as it provides
|
|
|
|
|
device specific optimized bias to allow/optimize functionality.
|
2012-05-15 06:48:59 +00:00
|
|
|
|
2013-09-13 19:01:15 +00:00
|
|
|
config REGULATOR_STW481X_VMMC
|
|
|
|
|
bool "ST Microelectronics STW481X VMMC regulator"
|
|
|
|
|
depends on MFD_STW481X
|
|
|
|
|
default y if MFD_STW481X
|
|
|
|
|
help
|
|
|
|
|
This driver supports the internal VMMC regulator in the STw481x
|
|
|
|
|
PMIC chips.
|
|
|
|
|
|
2012-10-06 15:17:46 +00:00
|
|
|
config REGULATOR_TPS51632
|
|
|
|
|
tristate "TI TPS51632 Power Regulator"
|
|
|
|
|
depends on I2C
|
|
|
|
|
select REGMAP_I2C
|
|
|
|
|
help
|
|
|
|
|
This driver supports TPS51632 voltage regulator chip.
|
2012-11-01 06:02:36 +00:00
|
|
|
The TPS51632 is 3-2-1 Phase D-Cap+ Step Down Driverless Controller
|
2012-10-06 15:17:46 +00:00
|
|
|
with Serial VID control and DVFS.
|
|
|
|
|
The voltage output can be configure through I2C interface or PWM
|
|
|
|
|
interface.
|
|
|
|
|
|
2011-03-09 12:02:55 +00:00
|
|
|
config REGULATOR_TPS6105X
|
|
|
|
|
tristate "TI TPS6105X Power regulators"
|
|
|
|
|
depends on TPS6105X
|
|
|
|
|
default y if TPS6105X
|
|
|
|
|
help
|
|
|
|
|
This driver supports TPS61050/TPS61052 voltage regulator chips.
|
|
|
|
|
It is a single boost converter primarily for white LEDs and
|
|
|
|
|
audio amplifiers.
|
|
|
|
|
|
2012-02-22 01:29:16 +00:00
|
|
|
config REGULATOR_TPS62360
|
2012-04-02 10:19:28 +00:00
|
|
|
tristate "TI TPS6236x Power Regulator"
|
2012-02-22 01:29:16 +00:00
|
|
|
depends on I2C
|
|
|
|
|
select REGMAP_I2C
|
|
|
|
|
help
|
2012-04-02 10:19:28 +00:00
|
|
|
This driver supports TPS6236x voltage regulator chip. This
|
2012-02-22 01:29:16 +00:00
|
|
|
regulator is meant for processor core supply. This chip is
|
|
|
|
|
high-frequency synchronous step down dc-dc converter optimized
|
|
|
|
|
for battery-powered portable applications.
|
|
|
|
|
|
2009-08-20 19:09:44 +00:00
|
|
|
config REGULATOR_TPS65023
|
|
|
|
|
tristate "TI TPS65023 Power regulators"
|
|
|
|
|
depends on I2C
|
2011-06-18 00:18:51 +00:00
|
|
|
select REGMAP_I2C
|
2009-08-20 19:09:44 +00:00
|
|
|
help
|
|
|
|
|
This driver supports TPS65023 voltage regulator chips. TPS65023 provides
|
|
|
|
|
three step-down converters and two general-purpose LDO voltage regulators.
|
|
|
|
|
It supports TI's software based Class-2 SmartReflex implementation.
|
|
|
|
|
|
|
|
|
|
config REGULATOR_TPS6507X
|
|
|
|
|
tristate "TI TPS6507X Power regulators"
|
|
|
|
|
depends on I2C
|
|
|
|
|
help
|
|
|
|
|
This driver supports TPS6507X voltage regulator chips. TPS6507X provides
|
|
|
|
|
three step-down converters and two general-purpose LDO voltage regulators.
|
|
|
|
|
It supports TI's software based Class-2 SmartReflex implementation.
|
|
|
|
|
|
2012-03-22 13:04:09 +00:00
|
|
|
config REGULATOR_TPS65090
|
|
|
|
|
tristate "TI TPS65090 Power regulator"
|
|
|
|
|
depends on MFD_TPS65090
|
|
|
|
|
help
|
|
|
|
|
This driver provides support for the voltage regulators on the
|
|
|
|
|
TI TPS65090 PMIC.
|
|
|
|
|
|
2012-01-11 10:41:49 +00:00
|
|
|
config REGULATOR_TPS65217
|
|
|
|
|
tristate "TI TPS65217 Power regulators"
|
|
|
|
|
depends on MFD_TPS65217
|
2011-06-09 19:50:27 +00:00
|
|
|
help
|
2012-01-11 10:41:49 +00:00
|
|
|
This driver supports TPS65217 voltage regulator chips. TPS65217
|
|
|
|
|
provides three step-down converters and four general-purpose LDO
|
|
|
|
|
voltage regulators. It supports software based voltage control
|
|
|
|
|
for different voltage domains
|
2011-06-09 19:50:27 +00:00
|
|
|
|
2014-02-06 05:50:13 +00:00
|
|
|
config REGULATOR_TPS65218
|
|
|
|
|
tristate "TI TPS65218 Power regulators"
|
2014-02-19 08:35:03 +00:00
|
|
|
depends on MFD_TPS65218 && OF
|
2014-02-06 05:50:13 +00:00
|
|
|
help
|
|
|
|
|
This driver supports TPS65218 voltage regulator chips. TPS65218
|
|
|
|
|
provides six step-down converters and one general-purpose LDO
|
|
|
|
|
voltage regulators. It supports software based voltage control
|
|
|
|
|
for different voltage domains
|
|
|
|
|
|
2010-12-07 17:04:11 +00:00
|
|
|
config REGULATOR_TPS6524X
|
|
|
|
|
tristate "TI TPS6524X Power regulators"
|
|
|
|
|
depends on SPI
|
2009-10-08 06:03:57 +00:00
|
|
|
help
|
2010-12-07 17:04:11 +00:00
|
|
|
This driver supports TPS6524X voltage regulator chips. TPS6524X
|
|
|
|
|
provides three step-down converters and two general-purpose LDO
|
|
|
|
|
voltage regulators. This device is interfaced using a customized
|
|
|
|
|
serial interface currently supported on the sequencer serial
|
|
|
|
|
port controller.
|
2009-10-08 06:03:57 +00:00
|
|
|
|
2012-02-22 01:29:16 +00:00
|
|
|
config REGULATOR_TPS6586X
|
|
|
|
|
tristate "TI TPS6586X Power regulators"
|
|
|
|
|
depends on MFD_TPS6586X
|
2010-06-13 15:25:51 +00:00
|
|
|
help
|
2012-02-22 01:29:16 +00:00
|
|
|
This driver supports TPS6586X voltage regulator chips.
|
2010-06-13 15:25:51 +00:00
|
|
|
|
2011-05-02 21:20:08 +00:00
|
|
|
config REGULATOR_TPS65910
|
2012-02-21 02:14:55 +00:00
|
|
|
tristate "TI TPS65910/TPS65911 Power Regulators"
|
2011-05-02 21:20:08 +00:00
|
|
|
depends on MFD_TPS65910
|
2010-06-04 03:46:04 +00:00
|
|
|
help
|
2012-02-21 02:14:55 +00:00
|
|
|
This driver supports TPS65910/TPS65911 voltage regulator chips.
|
2010-07-13 16:18:56 +00:00
|
|
|
|
2012-02-22 01:29:16 +00:00
|
|
|
config REGULATOR_TPS65912
|
|
|
|
|
tristate "TI TPS65912 Power regulator"
|
|
|
|
|
depends on (MFD_TPS65912_I2C || MFD_TPS65912_SPI)
|
2010-07-13 16:18:56 +00:00
|
|
|
help
|
2012-02-22 01:29:16 +00:00
|
|
|
This driver supports TPS65912 voltage regulator chip.
|
2010-07-13 16:18:56 +00:00
|
|
|
|
2012-11-11 15:12:01 +00:00
|
|
|
config REGULATOR_TPS80031
|
|
|
|
|
tristate "TI TPS80031/TPS80032 power regualtor driver"
|
|
|
|
|
depends on MFD_TPS80031
|
|
|
|
|
help
|
|
|
|
|
TPS80031/ TPS80032 Fully Integrated Power Management with Power
|
|
|
|
|
Path and Battery Charger. It has 5 configurable step-down
|
|
|
|
|
converters, 11 general purpose LDOs, VBUS generator and digital
|
|
|
|
|
output to control regulators.
|
|
|
|
|
|
2012-02-22 01:29:16 +00:00
|
|
|
config REGULATOR_TWL4030
|
2013-07-29 15:49:46 +00:00
|
|
|
tristate "TI TWL4030/TWL5030/TWL6030/TPS659x0 PMIC"
|
2012-02-22 01:29:16 +00:00
|
|
|
depends on TWL4030_CORE
|
2011-04-01 12:43:33 +00:00
|
|
|
help
|
2012-02-22 01:29:16 +00:00
|
|
|
This driver supports the voltage regulators provided by
|
|
|
|
|
this family of companion chips.
|
2011-04-01 12:43:33 +00:00
|
|
|
|
2012-09-24 17:56:54 +00:00
|
|
|
config REGULATOR_VEXPRESS
|
|
|
|
|
tristate "Versatile Express regulators"
|
|
|
|
|
depends on VEXPRESS_CONFIG
|
|
|
|
|
help
|
|
|
|
|
This driver provides support for voltage regulators available
|
|
|
|
|
on the ARM Ltd's Versatile Express platform.
|
|
|
|
|
|
2012-02-22 01:29:16 +00:00
|
|
|
config REGULATOR_WM831X
|
|
|
|
|
tristate "Wolfson Microelectronics WM831x PMIC regulators"
|
|
|
|
|
depends on MFD_WM831X
|
2010-07-27 11:03:01 +00:00
|
|
|
help
|
2012-02-22 01:29:16 +00:00
|
|
|
Support the voltage and current regulators of the WM831x series
|
|
|
|
|
of PMIC devices.
|
2010-07-27 11:03:01 +00:00
|
|
|
|
2012-02-22 01:29:16 +00:00
|
|
|
config REGULATOR_WM8350
|
|
|
|
|
tristate "Wolfson Microelectronics WM8350 AudioPlus PMIC"
|
|
|
|
|
depends on MFD_WM8350
|
2010-12-07 17:04:11 +00:00
|
|
|
help
|
2012-02-22 01:29:16 +00:00
|
|
|
This driver provides support for the voltage and current regulators
|
2012-07-26 14:07:23 +00:00
|
|
|
of the WM8350 AudioPlus PMIC.
|
2010-12-07 17:04:11 +00:00
|
|
|
|
2012-02-22 01:29:16 +00:00
|
|
|
config REGULATOR_WM8400
|
|
|
|
|
tristate "Wolfson Microelectronics WM8400 AudioPlus PMIC"
|
|
|
|
|
depends on MFD_WM8400
|
2011-05-02 21:20:08 +00:00
|
|
|
help
|
2012-02-22 01:29:16 +00:00
|
|
|
This driver provides support for the voltage regulators of the
|
|
|
|
|
WM8400 AudioPlus PMIC.
|
2011-05-02 21:20:08 +00:00
|
|
|
|
2012-02-22 01:29:16 +00:00
|
|
|
config REGULATOR_WM8994
|
|
|
|
|
tristate "Wolfson Microelectronics WM8994 CODEC"
|
|
|
|
|
depends on MFD_WM8994
|
2011-07-04 08:43:42 +00:00
|
|
|
help
|
2012-02-22 01:29:16 +00:00
|
|
|
This driver provides support for the voltage regulators on the
|
|
|
|
|
WM8994 CODEC.
|
2011-07-04 08:43:42 +00:00
|
|
|
|
2008-10-30 14:57:05 +00:00
|
|
|
endif
|
2009-08-18 23:43:50 +00:00
|
|
|
|
