linux/net/dsa/Makefile

21 lines
841 B
Makefile
Raw Normal View History

License cleanup: add SPDX GPL-2.0 license identifier to files with no license Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 14:07:57 +00:00
# SPDX-License-Identifier: GPL-2.0
# the core
obj-$(CONFIG_NET_DSA) += dsa_core.o
dsa_core-y += dsa.o dsa2.o master.o port.o slave.o switch.o
net: Distributed Switch Architecture protocol support Distributed Switch Architecture is a protocol for managing hardware switch chips. It consists of a set of MII management registers and commands to configure the switch, and an ethernet header format to signal which of the ports of the switch a packet was received from or is intended to be sent to. The switches that this driver supports are typically embedded in access points and routers, and a typical setup with a DSA switch looks something like this: +-----------+ +-----------+ | | RGMII | | | +-------+ +------ 1000baseT MDI ("WAN") | | | 6-port +------ 1000baseT MDI ("LAN1") | CPU | | ethernet +------ 1000baseT MDI ("LAN2") | |MIImgmt| switch +------ 1000baseT MDI ("LAN3") | +-------+ w/5 PHYs +------ 1000baseT MDI ("LAN4") | | | | +-----------+ +-----------+ The switch driver presents each port on the switch as a separate network interface to Linux, polls the switch to maintain software link state of those ports, forwards MII management interface accesses to those network interfaces (e.g. as done by ethtool) to the switch, and exposes the switch's hardware statistics counters via the appropriate Linux kernel interfaces. This initial patch supports the MII management interface register layout of the Marvell 88E6123, 88E6161 and 88E6165 switch chips, and supports the "Ethertype DSA" packet tagging format. (There is no officially registered ethertype for the Ethertype DSA packet format, so we just grab a random one. The ethertype to use is programmed into the switch, and the switch driver uses the value of ETH_P_EDSA for this, so this define can be changed at any time in the future if the one we chose is allocated to another protocol or if Ethertype DSA gets its own officially registered ethertype, and everything will continue to work.) Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Tested-by: Nicolas Pitre <nico@marvell.com> Tested-by: Byron Bradley <byron.bbradley@gmail.com> Tested-by: Tim Ellis <tim.ellis@mac.com> Tested-by: Peter van Valderen <linux@ddcrew.com> Tested-by: Dirk Teurlings <dirk@upexia.nl> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-07 13:44:02 +00:00
# tagging formats
net: dsa: Optional VLAN-based port separation for switches without tagging This patch provides generic DSA code for using VLAN (802.1Q) tags for the same purpose as a dedicated switch tag for injection/extraction. It is based on the discussions and interest that has been so far expressed in https://www.spinics.net/lists/netdev/msg556125.html. Unlike all other DSA-supported tagging protocols, CONFIG_NET_DSA_TAG_8021Q does not offer a complete solution for drivers (nor can it). Instead, it provides generic code that driver can opt into calling: - dsa_8021q_xmit: Inserts a VLAN header with the specified contents. Can be called from another tagging protocol's xmit function. Currently the LAN9303 driver is inserting headers that are simply 802.1Q with custom fields, so this is an opportunity for code reuse. - dsa_8021q_rcv: Retrieves the TPID and TCI from a VLAN-tagged skb. Removing the VLAN header is left as a decision for the caller to make. - dsa_port_setup_8021q_tagging: For each user port, installs an Rx VID and a Tx VID, for proper untagged traffic identification on ingress and steering on egress. Also sets up the VLAN trunk on the upstream (CPU or DSA) port. Drivers are intentionally left to call this function explicitly, depending on the context and hardware support. The expected switch behavior and VLAN semantics should not be violated under any conditions. That is, after calling dsa_port_setup_8021q_tagging, the hardware should still pass all ingress traffic, be it tagged or untagged. For uniformity with the other tagging protocols, a module for the dsa_8021q_netdev_ops structure is registered, but the typical usage is to set up another tagging protocol which selects CONFIG_NET_DSA_TAG_8021Q, and calls the API from tag_8021q.h. Null function definitions are also provided so that a "depends on" is not forced in the Kconfig. This tagging protocol only works when switch ports are standalone, or when they are added to a VLAN-unaware bridge. It will probably remain this way for the reasons below. When added to a bridge that has vlan_filtering 1, the bridge core will install its own VLANs and reset the pvids through switchdev. For the bridge core, switchdev is a write-only pipe. All VLAN-related state is kept in the bridge core and nothing is read from DSA/switchdev or from the driver. So the bridge core will break this port separation because it will install the vlan_default_pvid into all switchdev ports. Even if we could teach the bridge driver about switchdev preference of a certain vlan_default_pvid (task difficult in itself since the current setting is per-bridge but we would need it per-port), there would still exist many other challenges. Firstly, in the DSA rcv callback, a driver would have to perform an iterative reverse lookup to find the correct switch port. That is because the port is a bridge slave, so its Rx VID (port PVID) is subject to user configuration. How would we ensure that the user doesn't reset the pvid to a different value (which would make an O(1) translation impossible), or to a non-unique value within this DSA switch tree (which would make any translation impossible)? Finally, not all switch ports are equal in DSA, and that makes it difficult for the bridge to be completely aware of this anyway. The CPU port needs to transmit tagged packets (VLAN trunk) in order for the DSA rcv code to be able to decode source information. But the bridge code has absolutely no idea which switch port is the CPU port, if nothing else then just because there is no netdevice registered by DSA for the CPU port. Also DSA does not currently allow the user to specify that they want the CPU port to do VLAN trunking anyway. VLANs are added to the CPU port using the same flags as they were added on the user port. So the VLANs installed by dsa_port_setup_8021q_tagging per driver request should remain private from the bridge's and user's perspective, and should not alter the VLAN semantics observed by the user. In the current implementation a VLAN range ending at 4095 (VLAN_N_VID) is reserved for this purpose. Each port receives a unique Rx VLAN and a unique Tx VLAN. Separate VLANs are needed for Rx and Tx because they serve different purposes: on Rx the switch must process traffic as untagged and process it with a port-based VLAN, but with care not to hinder bridging. On the other hand, the Tx VLAN is where the reachability restrictions are imposed, since by tagging frames in the xmit callback we are telling the switch onto which port to steer the frame. Some general guidance on how this support might be employed for real-life hardware (some comments made by Florian Fainelli): - If the hardware supports VLAN tag stacking, it should somehow back up its private VLAN settings when the bridge tries to override them. Then the driver could re-apply them as outer tags. Dedicating an outer tag per bridge device would allow identical inner tag VID numbers to co-exist, yet preserve broadcast domain isolation. - If the switch cannot handle VLAN tag stacking, it should disable this port separation when added as slave to a vlan_filtering bridge, in that case having reduced functionality. - Drivers for old switches that don't support the entire VLAN_N_VID range will need to rework the current range selection mechanism. Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Vivien Didelot <vivien.didelot@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-05 10:19:22 +00:00
obj-$(CONFIG_NET_DSA_TAG_8021Q) += tag_8021q.o
obj-$(CONFIG_NET_DSA_TAG_AR9331) += tag_ar9331.o
obj-$(CONFIG_NET_DSA_TAG_BRCM_COMMON) += tag_brcm.o
obj-$(CONFIG_NET_DSA_TAG_DSA_COMMON) += tag_dsa.o
obj-$(CONFIG_NET_DSA_TAG_GSWIP) += tag_gswip.o
obj-$(CONFIG_NET_DSA_TAG_HELLCREEK) += tag_hellcreek.o
obj-$(CONFIG_NET_DSA_TAG_KSZ) += tag_ksz.o
net: dsa: tag_rtl4_a: Implement Realtek 4 byte A tag This implements the known parts of the Realtek 4 byte tag protocol version 0xA, as found in the RTL8366RB DSA switch. It is designated as protocol version 0xA as a different Realtek 4 byte tag format with protocol version 0x9 is known to exist in the Realtek RTL8306 chips. The tag and switch chip lacks public documentation, so the tag format has been reverse-engineered from packet dumps. As only ingress traffic has been available for analysis an egress tag has not been possible to develop (even using educated guesses about bit fields) so this is as far as it gets. It is not known if the switch even supports egress tagging. Excessive attempts to figure out the egress tag format was made. When nothing else worked, I just tried all bit combinations with 0xannp where a is protocol and p is port. I looped through all values several times trying to get a response from ping, without any positive result. Using just these ingress tags however, the switch functionality is vastly improved and the packets find their way into the destination port without any tricky VLAN configuration. On the D-Link DIR-685 the LAN ports now come up and respond to ping without any command line configuration so this is a real improvement for users. Egress packets need to be restricted to the proper target ports using VLAN, which the RTL8366RB DSA switch driver already sets up. Cc: DENG Qingfang <dqfext@gmail.com> Cc: Mauri Sandberg <sandberg@mailfence.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-08 12:25:36 +00:00
obj-$(CONFIG_NET_DSA_TAG_RTL4_A) += tag_rtl4_a.o
obj-$(CONFIG_NET_DSA_TAG_LAN9303) += tag_lan9303.o
obj-$(CONFIG_NET_DSA_TAG_MTK) += tag_mtk.o
obj-$(CONFIG_NET_DSA_TAG_OCELOT) += tag_ocelot.o
obj-$(CONFIG_NET_DSA_TAG_QCA) += tag_qca.o
obj-$(CONFIG_NET_DSA_TAG_SJA1105) += tag_sja1105.o
obj-$(CONFIG_NET_DSA_TAG_TRAILER) += tag_trailer.o