linux/Documentation/devicetree/bindings/clock/fixed-clock.txt

Binding for simple fixed-rate clock sources.

This binding uses the common clock binding[1].

[1] Documentation/devicetree/bindings/clock/clock-bindings.txt

Required properties:
- compatible : shall be "fixed-clock".
- #clock-cells : from common clock binding; shall be set to 0.
- clock-frequency : frequency of clock in Hz. Should be a single cell.

Optional properties:
- gpios : From common gpio binding; gpio connection to clock enable pin.
- clock-output-names : From common clock binding.

Example:
	clock {
		compatible = "fixed-clock";
		#clock-cells = <0>;
		clock-frequency = <1000000000>;
	};
clk: add DT clock binding support Based on work 1st by Ben Herrenschmidt and Jeremy Kerr, then by Grant Likely, this patch adds support to clk_get to allow drivers to retrieve clock data from the device tree. Platforms scan for clocks in DT with of_clk_init and a match table, and the register a provider through of_clk_add_provider. The provider's clk_src_get function will be called when a device references the provider's OF node for a clock reference. v6 (Rob Herring): - Return error values instead of NULL to match clock framework expectations v5 (Rob Herring): - Move from drivers/of into common clock subsystem - Squashed "dt/clock: add a simple provider get function" and "dt/clock: add function to get parent clock name" - Rebase to 3.4-rc1 - Drop CONFIG_OF_CLOCK and just use CONFIG_OF - Add missing EXPORT_SYMBOL to various functions - s/clock-output-name/clock-output-names/ - Define that fixed-clock binding is a single output v4 (Rob Herring): - Rework for common clk subsystem - Add of_clk_get_parent_name function v3: - Clarified documentation v2: - fixed errant ';' causing compile error - Editorial fixes from Shawn Guo - merged in adding lookup to clkdev - changed property names to match established convention. After working with the binding a bit it really made more sense to follow the lead of 'reg', 'gpios' and 'interrupts' by making the input simply 'clocks' & 'clock-names' instead of 'clock-input-', and to only use clock-output for the producer nodes. (Sorry Shawn, this will mean you need to change some code, but it should be trivial) - Add ability to inherit clocks from parent nodes by using an empty 'clock-ranges' property. Useful for busses. I could use some feedback on the new property name, 'clock-ranges' doesn't feel right to me. Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Rob Herring <rob.herring@calxeda.com> Reviewed-by: Shawn Guo <shawn.guo@freescale.com> Cc: Sascha Hauer <kernel@pengutronix.de> Signed-off-by: Mike Turquette <mturquette@linaro.org> 2012-04-09 19:50:06 +00:00			`Binding for simple fixed-rate clock sources.`

			`This binding uses the common clock binding[1].`

			`[1] Documentation/devicetree/bindings/clock/clock-bindings.txt`

			`Required properties:`
			`- compatible : shall be "fixed-clock".`
			`- #clock-cells : from common clock binding; shall be set to 0.`
			`- clock-frequency : frequency of clock in Hz. Should be a single cell.`

			`Optional properties:`
			`- gpios : From common gpio binding; gpio connection to clock enable pin.`
			`- clock-output-names : From common clock binding.`

			`Example:`
			`clock {`
			`compatible = "fixed-clock";`
			`#clock-cells = <0>;`
			`clock-frequency = <1000000000>;`
			`};`