2020-01-06 21:16:24 +00:00
|
|
|
// SPDX-License-Identifier: GPL-2.0
|
|
|
|
//
|
|
|
|
// Copyright (c) 2019 five technologies GmbH
|
|
|
|
// Author: Markus Reichl <m.reichl@fivetechno.de>
|
|
|
|
|
|
|
|
#include <linux/module.h>
|
|
|
|
#include <linux/i2c.h>
|
|
|
|
#include <linux/of.h>
|
|
|
|
#include <linux/regulator/driver.h>
|
|
|
|
#include <linux/regmap.h>
|
|
|
|
|
|
|
|
|
|
|
|
#define VOL_MIN_IDX 0x00
|
|
|
|
#define VOL_MAX_IDX 0x7ff
|
|
|
|
|
|
|
|
/* Register definitions */
|
|
|
|
#define MP8859_VOUT_L_REG 0 //3 lo Bits
|
|
|
|
#define MP8859_VOUT_H_REG 1 //8 hi Bits
|
|
|
|
#define MP8859_VOUT_GO_REG 2
|
|
|
|
#define MP8859_IOUT_LIM_REG 3
|
|
|
|
#define MP8859_CTL1_REG 4
|
|
|
|
#define MP8859_CTL2_REG 5
|
|
|
|
#define MP8859_RESERVED1_REG 6
|
|
|
|
#define MP8859_RESERVED2_REG 7
|
|
|
|
#define MP8859_RESERVED3_REG 8
|
|
|
|
#define MP8859_STATUS_REG 9
|
|
|
|
#define MP8859_INTERRUPT_REG 0x0A
|
|
|
|
#define MP8859_MASK_REG 0x0B
|
|
|
|
#define MP8859_ID1_REG 0x0C
|
|
|
|
#define MP8859_MFR_ID_REG 0x27
|
|
|
|
#define MP8859_DEV_ID_REG 0x28
|
|
|
|
#define MP8859_IC_REV_REG 0x29
|
|
|
|
|
|
|
|
#define MP8859_MAX_REG 0x29
|
|
|
|
|
|
|
|
#define MP8859_GO_BIT 0x01
|
|
|
|
|
2024-02-25 14:59:34 +00:00
|
|
|
#define MP8859_IOUT_LIM_MASK 0x7f
|
|
|
|
|
2024-02-25 14:59:29 +00:00
|
|
|
#define MP8859_ENABLE_MASK 0x80
|
2024-02-25 14:59:31 +00:00
|
|
|
#define MP8859_DISCHG_EN_MASK 0x10
|
2024-02-25 14:59:30 +00:00
|
|
|
#define MP8859_MODE_MASK 0x08
|
2020-01-06 21:16:24 +00:00
|
|
|
|
2024-02-25 14:59:32 +00:00
|
|
|
#define MP8859_PG_MASK 0x80
|
|
|
|
#define MP8859_OTP_MASK 0x40
|
|
|
|
#define MP8859_OTW_MASK 0x20
|
|
|
|
#define MP8859_CC_CV_MASK 0x10
|
|
|
|
|
2020-01-06 21:16:24 +00:00
|
|
|
static int mp8859_set_voltage_sel(struct regulator_dev *rdev, unsigned int sel)
|
|
|
|
{
|
|
|
|
int ret;
|
|
|
|
|
|
|
|
ret = regmap_write(rdev->regmap, MP8859_VOUT_L_REG, sel & 0x7);
|
|
|
|
|
|
|
|
if (ret)
|
|
|
|
return ret;
|
|
|
|
ret = regmap_write(rdev->regmap, MP8859_VOUT_H_REG, sel >> 3);
|
|
|
|
|
|
|
|
if (ret)
|
|
|
|
return ret;
|
|
|
|
ret = regmap_update_bits(rdev->regmap, MP8859_VOUT_GO_REG,
|
|
|
|
MP8859_GO_BIT, 1);
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int mp8859_get_voltage_sel(struct regulator_dev *rdev)
|
|
|
|
{
|
|
|
|
unsigned int val_tmp;
|
|
|
|
unsigned int val;
|
|
|
|
int ret;
|
|
|
|
|
|
|
|
ret = regmap_read(rdev->regmap, MP8859_VOUT_H_REG, &val_tmp);
|
|
|
|
|
|
|
|
if (ret)
|
|
|
|
return ret;
|
|
|
|
val = val_tmp << 3;
|
|
|
|
|
|
|
|
ret = regmap_read(rdev->regmap, MP8859_VOUT_L_REG, &val_tmp);
|
|
|
|
|
|
|
|
if (ret)
|
|
|
|
return ret;
|
|
|
|
val |= val_tmp & 0x07;
|
|
|
|
return val;
|
|
|
|
}
|
|
|
|
|
2024-02-25 14:59:33 +00:00
|
|
|
static int mp8859_set_voltage_time_sel(struct regulator_dev *rdev,
|
|
|
|
unsigned int from, unsigned int to)
|
|
|
|
{
|
|
|
|
int change;
|
|
|
|
|
|
|
|
/* The voltage ramps at 1mV/uS, selectors are 10mV */
|
|
|
|
if (from > to)
|
|
|
|
change = from - to;
|
|
|
|
else
|
|
|
|
change = to - from;
|
|
|
|
|
|
|
|
return change * 10 * 1000;
|
|
|
|
}
|
|
|
|
|
2024-02-25 14:59:30 +00:00
|
|
|
static unsigned int mp8859_get_mode(struct regulator_dev *rdev)
|
|
|
|
{
|
|
|
|
unsigned int val;
|
|
|
|
int ret;
|
|
|
|
|
|
|
|
ret = regmap_read(rdev->regmap, MP8859_CTL1_REG, &val);
|
|
|
|
if (ret != 0) {
|
|
|
|
dev_err(&rdev->dev, "Failed to read mode: %d\n", ret);
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (val & MP8859_MODE_MASK)
|
|
|
|
return REGULATOR_MODE_FAST;
|
|
|
|
else
|
|
|
|
return REGULATOR_MODE_NORMAL;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int mp8859_set_mode(struct regulator_dev *rdev, unsigned int mode)
|
|
|
|
{
|
|
|
|
unsigned int val;
|
|
|
|
|
|
|
|
switch (mode) {
|
|
|
|
case REGULATOR_MODE_FAST:
|
|
|
|
val = MP8859_MODE_MASK;
|
|
|
|
break;
|
|
|
|
case REGULATOR_MODE_NORMAL:
|
|
|
|
val = 0;
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
|
|
|
|
return regmap_update_bits(rdev->regmap, MP8859_CTL1_REG,
|
|
|
|
MP8859_MODE_MASK, val);
|
|
|
|
}
|
|
|
|
|
2024-02-25 14:59:34 +00:00
|
|
|
static int mp8859_set_current_limit(struct regulator_dev *rdev,
|
|
|
|
int min_uA, int max_uA)
|
|
|
|
{
|
|
|
|
unsigned int cur_val, new_val;
|
|
|
|
int ret, i;
|
|
|
|
|
|
|
|
/* Steps of 50mA */
|
|
|
|
new_val = max_uA / 50000;
|
|
|
|
if (new_val > MP8859_IOUT_LIM_MASK)
|
|
|
|
return -EINVAL;
|
|
|
|
if (new_val == 0)
|
|
|
|
return -EINVAL;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* If the regulator is limiting then ramp gradually as per
|
|
|
|
* datasheet, otherwise just set the value directly.
|
|
|
|
*/
|
|
|
|
ret = regmap_read(rdev->regmap, MP8859_STATUS_REG, &cur_val);
|
|
|
|
if (ret != 0)
|
|
|
|
return ret;
|
|
|
|
if (!(cur_val & MP8859_CC_CV_MASK)) {
|
|
|
|
return regmap_update_bits(rdev->regmap, MP8859_IOUT_LIM_REG,
|
|
|
|
MP8859_IOUT_LIM_MASK, new_val);
|
|
|
|
}
|
|
|
|
|
|
|
|
ret = regmap_read(rdev->regmap, MP8859_IOUT_LIM_REG, &cur_val);
|
|
|
|
if (ret != 0)
|
|
|
|
return ret;
|
|
|
|
|
|
|
|
if (cur_val >= new_val) {
|
|
|
|
for (i = cur_val; i >= new_val; i--) {
|
|
|
|
ret = regmap_update_bits(rdev->regmap,
|
|
|
|
MP8859_IOUT_LIM_REG,
|
|
|
|
MP8859_IOUT_LIM_MASK,
|
|
|
|
cur_val - i);
|
|
|
|
if (ret != 0)
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
} else {
|
|
|
|
for (i = cur_val; i <= new_val; i++) {
|
|
|
|
ret = regmap_update_bits(rdev->regmap,
|
|
|
|
MP8859_IOUT_LIM_REG,
|
|
|
|
MP8859_IOUT_LIM_MASK,
|
|
|
|
cur_val + i);
|
|
|
|
if (ret != 0)
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2024-02-25 14:59:32 +00:00
|
|
|
static int mp8859_get_status(struct regulator_dev *rdev)
|
|
|
|
{
|
|
|
|
unsigned int val;
|
|
|
|
int ret;
|
|
|
|
|
|
|
|
/* Output status is only meaingful when enabled */
|
|
|
|
ret = regmap_read(rdev->regmap, MP8859_CTL1_REG, &val);
|
|
|
|
if (ret != 0)
|
|
|
|
return ret;
|
|
|
|
if (!(val & MP8859_ENABLE_MASK))
|
|
|
|
return REGULATOR_STATUS_UNDEFINED;
|
|
|
|
|
|
|
|
ret = regmap_read(rdev->regmap, MP8859_STATUS_REG, &val);
|
|
|
|
if (ret != 0)
|
|
|
|
return ret;
|
|
|
|
|
|
|
|
if (val & MP8859_PG_MASK)
|
|
|
|
return REGULATOR_STATUS_ON;
|
|
|
|
else
|
|
|
|
return REGULATOR_STATUS_ERROR;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int mp8859_get_error_flags(struct regulator_dev *rdev,
|
|
|
|
unsigned int *flags)
|
|
|
|
{
|
|
|
|
unsigned int status, enabled;
|
|
|
|
int ret;
|
|
|
|
|
|
|
|
*flags = 0;
|
|
|
|
|
|
|
|
/* Output status is only meaingful when enabled */
|
|
|
|
ret = regmap_read(rdev->regmap, MP8859_CTL1_REG, &enabled);
|
|
|
|
if (ret != 0)
|
|
|
|
return ret;
|
|
|
|
enabled &= MP8859_ENABLE_MASK;
|
|
|
|
|
|
|
|
ret = regmap_read(rdev->regmap, MP8859_STATUS_REG, &status);
|
|
|
|
if (ret != 0)
|
|
|
|
return ret;
|
|
|
|
|
|
|
|
if (enabled && !(status & MP8859_PG_MASK))
|
|
|
|
status |= REGULATOR_ERROR_FAIL;
|
|
|
|
if (status & MP8859_OTP_MASK)
|
|
|
|
status |= REGULATOR_ERROR_OVER_TEMP;
|
|
|
|
if (status & MP8859_OTW_MASK)
|
|
|
|
status |= REGULATOR_ERROR_OVER_TEMP_WARN;
|
|
|
|
if (status & MP8859_CC_CV_MASK)
|
|
|
|
status |= REGULATOR_ERROR_OVER_CURRENT;
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2020-05-08 15:43:36 +00:00
|
|
|
static const struct linear_range mp8859_dcdc_ranges[] = {
|
2020-01-06 21:16:24 +00:00
|
|
|
REGULATOR_LINEAR_RANGE(0, VOL_MIN_IDX, VOL_MAX_IDX, 10000),
|
|
|
|
};
|
|
|
|
|
2024-02-25 14:59:27 +00:00
|
|
|
static bool mp8859_readable(struct device *dev, unsigned int reg)
|
|
|
|
{
|
|
|
|
switch (reg) {
|
|
|
|
case MP8859_VOUT_L_REG:
|
|
|
|
case MP8859_VOUT_H_REG:
|
|
|
|
case MP8859_VOUT_GO_REG:
|
|
|
|
case MP8859_IOUT_LIM_REG:
|
|
|
|
case MP8859_CTL1_REG:
|
|
|
|
case MP8859_CTL2_REG:
|
|
|
|
case MP8859_STATUS_REG:
|
|
|
|
case MP8859_INTERRUPT_REG:
|
|
|
|
case MP8859_MASK_REG:
|
|
|
|
case MP8859_ID1_REG:
|
|
|
|
case MP8859_MFR_ID_REG:
|
|
|
|
case MP8859_DEV_ID_REG:
|
|
|
|
case MP8859_IC_REV_REG:
|
|
|
|
return true;
|
|
|
|
default:
|
|
|
|
return false;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
static bool mp8859_volatile(struct device *dev, unsigned int reg)
|
|
|
|
{
|
|
|
|
switch (reg) {
|
|
|
|
case MP8859_VOUT_GO_REG:
|
|
|
|
case MP8859_STATUS_REG:
|
|
|
|
case MP8859_INTERRUPT_REG:
|
|
|
|
return true;
|
|
|
|
default:
|
|
|
|
return false;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2020-01-06 21:16:24 +00:00
|
|
|
static const struct regmap_config mp8859_regmap = {
|
|
|
|
.reg_bits = 8,
|
|
|
|
.val_bits = 8,
|
|
|
|
.max_register = MP8859_MAX_REG,
|
2024-02-25 14:59:27 +00:00
|
|
|
.cache_type = REGCACHE_MAPLE,
|
|
|
|
.readable_reg = mp8859_readable,
|
|
|
|
.volatile_reg = mp8859_volatile,
|
2020-01-06 21:16:24 +00:00
|
|
|
};
|
|
|
|
|
|
|
|
static const struct regulator_ops mp8859_ops = {
|
|
|
|
.set_voltage_sel = mp8859_set_voltage_sel,
|
|
|
|
.get_voltage_sel = mp8859_get_voltage_sel,
|
|
|
|
.list_voltage = regulator_list_voltage_linear_range,
|
2024-02-25 14:59:33 +00:00
|
|
|
.set_voltage_time_sel = mp8859_set_voltage_time_sel,
|
2024-02-25 14:59:29 +00:00
|
|
|
.enable = regulator_enable_regmap,
|
|
|
|
.disable = regulator_disable_regmap,
|
|
|
|
.is_enabled = regulator_is_enabled_regmap,
|
2024-02-25 14:59:30 +00:00
|
|
|
.set_mode = mp8859_set_mode,
|
|
|
|
.get_mode = mp8859_get_mode,
|
2024-02-25 14:59:31 +00:00
|
|
|
.set_active_discharge = regulator_set_active_discharge_regmap,
|
2024-02-25 14:59:34 +00:00
|
|
|
.set_current_limit = mp8859_set_current_limit,
|
2024-02-25 14:59:32 +00:00
|
|
|
.get_status = mp8859_get_status,
|
|
|
|
.get_error_flags = mp8859_get_error_flags,
|
2020-01-06 21:16:24 +00:00
|
|
|
};
|
|
|
|
|
|
|
|
static const struct regulator_desc mp8859_regulators[] = {
|
|
|
|
{
|
|
|
|
.id = 0,
|
|
|
|
.type = REGULATOR_VOLTAGE,
|
|
|
|
.name = "mp8859_dcdc",
|
2020-02-03 11:00:33 +00:00
|
|
|
.supply_name = "vin",
|
2020-01-06 21:16:24 +00:00
|
|
|
.of_match = of_match_ptr("mp8859_dcdc"),
|
|
|
|
.n_voltages = VOL_MAX_IDX + 1,
|
|
|
|
.linear_ranges = mp8859_dcdc_ranges,
|
|
|
|
.n_linear_ranges = 1,
|
2024-02-25 14:59:29 +00:00
|
|
|
.enable_reg = MP8859_CTL1_REG,
|
|
|
|
.enable_mask = MP8859_ENABLE_MASK,
|
|
|
|
.enable_val = MP8859_ENABLE_MASK,
|
2024-02-25 14:59:31 +00:00
|
|
|
.active_discharge_reg = MP8859_CTL1_REG,
|
|
|
|
.active_discharge_on = MP8859_DISCHG_EN_MASK,
|
|
|
|
.active_discharge_mask = MP8859_DISCHG_EN_MASK,
|
2020-01-06 21:16:24 +00:00
|
|
|
.ops = &mp8859_ops,
|
|
|
|
.owner = THIS_MODULE,
|
|
|
|
},
|
|
|
|
};
|
|
|
|
|
|
|
|
static int mp8859_i2c_probe(struct i2c_client *i2c)
|
|
|
|
{
|
|
|
|
int ret;
|
|
|
|
struct regulator_config config = {.dev = &i2c->dev};
|
|
|
|
struct regmap *regmap = devm_regmap_init_i2c(i2c, &mp8859_regmap);
|
|
|
|
struct regulator_dev *rdev;
|
2024-02-25 14:59:28 +00:00
|
|
|
unsigned int val, rev;
|
2020-01-06 21:16:24 +00:00
|
|
|
|
|
|
|
if (IS_ERR(regmap)) {
|
|
|
|
ret = PTR_ERR(regmap);
|
|
|
|
dev_err(&i2c->dev, "regmap init failed: %d\n", ret);
|
|
|
|
return ret;
|
|
|
|
}
|
2024-02-25 14:59:28 +00:00
|
|
|
|
|
|
|
ret = regmap_read(regmap, MP8859_MFR_ID_REG, &val);
|
|
|
|
if (ret != 0) {
|
|
|
|
dev_err(&i2c->dev, "Failed to read manufacturer ID: %d\n", ret);
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
if (val != 0x9) {
|
|
|
|
dev_err(&i2c->dev, "Manufacturer ID %x != 9\n", val);
|
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
|
|
|
|
ret = regmap_read(regmap, MP8859_DEV_ID_REG, &val);
|
|
|
|
if (ret != 0) {
|
|
|
|
dev_err(&i2c->dev, "Failed to read device ID: %d\n", ret);
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
if (val != 0x58) {
|
|
|
|
dev_err(&i2c->dev, "Manufacturer ID %x != 0x58\n", val);
|
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
|
|
|
|
ret = regmap_read(regmap, MP8859_IC_REV_REG, &rev);
|
|
|
|
if (ret != 0) {
|
|
|
|
dev_err(&i2c->dev, "Failed to read device revision: %d\n", ret);
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
ret = regmap_read(regmap, MP8859_ID1_REG, &val);
|
|
|
|
if (ret != 0) {
|
|
|
|
dev_err(&i2c->dev, "Failed to read device ID1: %d\n", ret);
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
dev_info(&i2c->dev, "MP8859-%04d revision %d\n", val, rev);
|
|
|
|
|
2020-01-06 21:16:24 +00:00
|
|
|
rdev = devm_regulator_register(&i2c->dev, &mp8859_regulators[0],
|
|
|
|
&config);
|
|
|
|
|
|
|
|
if (IS_ERR(rdev)) {
|
|
|
|
ret = PTR_ERR(rdev);
|
|
|
|
dev_err(&i2c->dev, "failed to register %s: %d\n",
|
|
|
|
mp8859_regulators[0].name, ret);
|
2020-01-10 05:52:52 +00:00
|
|
|
return ret;
|
|
|
|
}
|
2020-01-06 21:16:24 +00:00
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2023-03-10 21:45:47 +00:00
|
|
|
static const struct of_device_id mp8859_dt_id[] __maybe_unused = {
|
2020-01-06 21:16:24 +00:00
|
|
|
{.compatible = "mps,mp8859"},
|
|
|
|
{},
|
|
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE(of, mp8859_dt_id);
|
|
|
|
|
|
|
|
static const struct i2c_device_id mp8859_i2c_id[] = {
|
|
|
|
{ "mp8859", },
|
|
|
|
{ },
|
|
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE(i2c, mp8859_i2c_id);
|
|
|
|
|
|
|
|
static struct i2c_driver mp8859_regulator_driver = {
|
|
|
|
.driver = {
|
|
|
|
.name = "mp8859",
|
2023-03-16 19:54:41 +00:00
|
|
|
.probe_type = PROBE_PREFER_ASYNCHRONOUS,
|
2020-01-06 21:16:24 +00:00
|
|
|
.of_match_table = of_match_ptr(mp8859_dt_id),
|
|
|
|
},
|
2023-05-05 22:02:18 +00:00
|
|
|
.probe = mp8859_i2c_probe,
|
2020-01-06 21:16:24 +00:00
|
|
|
.id_table = mp8859_i2c_id,
|
|
|
|
};
|
|
|
|
|
|
|
|
module_i2c_driver(mp8859_regulator_driver);
|
|
|
|
|
|
|
|
MODULE_DESCRIPTION("Monolithic Power Systems MP8859 voltage regulator driver");
|
|
|
|
MODULE_AUTHOR("Markus Reichl <m.reichl@fivetechno.de>");
|
|
|
|
MODULE_LICENSE("GPL v2");
|