linux/net/mac80211/cfg.c

1703 lines
43 KiB
C
Raw Normal View History

/*
* mac80211 configuration hooks for cfg80211
*
* Copyright 2006-2010 Johannes Berg <johannes@sipsolutions.net>
*
* This file is GPLv2 as found in COPYING.
*/
#include <linux/ieee80211.h>
#include <linux/nl80211.h>
#include <linux/rtnetlink.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 08:04:11 +00:00
#include <linux/slab.h>
[NET]: Make the device list and device lookups per namespace. This patch makes most of the generic device layer network namespace safe. This patch makes dev_base_head a network namespace variable, and then it picks up a few associated variables. The functions: dev_getbyhwaddr dev_getfirsthwbytype dev_get_by_flags dev_get_by_name __dev_get_by_name dev_get_by_index __dev_get_by_index dev_ioctl dev_ethtool dev_load wireless_process_ioctl were modified to take a network namespace argument, and deal with it. vlan_ioctl_set and brioctl_set were modified so their hooks will receive a network namespace argument. So basically anthing in the core of the network stack that was affected to by the change of dev_base was modified to handle multiple network namespaces. The rest of the network stack was simply modified to explicitly use &init_net the initial network namespace. This can be fixed when those components of the network stack are modified to handle multiple network namespaces. For now the ifindex generator is left global. Fundametally ifindex numbers are per namespace, or else we will have corner case problems with migration when we get that far. At the same time there are assumptions in the network stack that the ifindex of a network device won't change. Making the ifindex number global seems a good compromise until the network stack can cope with ifindex changes when you change namespaces, and the like. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-09-17 18:56:21 +00:00
#include <net/net_namespace.h>
#include <linux/rcupdate.h>
#include <net/cfg80211.h>
#include "ieee80211_i.h"
#include "driver-ops.h"
#include "cfg.h"
#include "rate.h"
#include "mesh.h"
static int ieee80211_add_iface(struct wiphy *wiphy, char *name,
enum nl80211_iftype type, u32 *flags,
struct vif_params *params)
{
struct ieee80211_local *local = wiphy_priv(wiphy);
struct net_device *dev;
struct ieee80211_sub_if_data *sdata;
int err;
err = ieee80211_if_add(local, name, &dev, type, params);
if (err || type != NL80211_IFTYPE_MONITOR || !flags)
return err;
sdata = IEEE80211_DEV_TO_SUB_IF(dev);
sdata->u.mntr_flags = *flags;
return 0;
}
static int ieee80211_del_iface(struct wiphy *wiphy, struct net_device *dev)
{
ieee80211_if_remove(IEEE80211_DEV_TO_SUB_IF(dev));
return 0;
}
static int ieee80211_change_iface(struct wiphy *wiphy,
struct net_device *dev,
enum nl80211_iftype type, u32 *flags,
struct vif_params *params)
{
struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
int ret;
ret = ieee80211_if_change_type(sdata, type);
if (ret)
return ret;
if (ieee80211_vif_is_mesh(&sdata->vif) && params->mesh_id_len)
ieee80211_sdata_set_mesh_id(sdata,
params->mesh_id_len,
params->mesh_id);
if (type == NL80211_IFTYPE_AP_VLAN &&
params && params->use_4addr == 0)
rcu_assign_pointer(sdata->u.vlan.sta, NULL);
else if (type == NL80211_IFTYPE_STATION &&
params && params->use_4addr >= 0)
sdata->u.mgd.use_4addr = params->use_4addr;
if (sdata->vif.type == NL80211_IFTYPE_MONITOR && flags) {
struct ieee80211_local *local = sdata->local;
if (ieee80211_sdata_running(sdata)) {
/*
* Prohibit MONITOR_FLAG_COOK_FRAMES to be
* changed while the interface is up.
* Else we would need to add a lot of cruft
* to update everything:
* cooked_mntrs, monitor and all fif_* counters
* reconfigure hardware
*/
if ((*flags & MONITOR_FLAG_COOK_FRAMES) !=
(sdata->u.mntr_flags & MONITOR_FLAG_COOK_FRAMES))
return -EBUSY;
ieee80211_adjust_monitor_flags(sdata, -1);
sdata->u.mntr_flags = *flags;
ieee80211_adjust_monitor_flags(sdata, 1);
ieee80211_configure_filter(local);
} else {
/*
* Because the interface is down, ieee80211_do_stop
* and ieee80211_do_open take care of "everything"
* mentioned in the comment above.
*/
sdata->u.mntr_flags = *flags;
}
}
return 0;
}
static int ieee80211_add_key(struct wiphy *wiphy, struct net_device *dev,
u8 key_idx, bool pairwise, const u8 *mac_addr,
struct key_params *params)
{
struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
struct sta_info *sta = NULL;
struct ieee80211_key *key;
int err;
if (!ieee80211_sdata_running(sdata))
return -ENETDOWN;
/* reject WEP and TKIP keys if WEP failed to initialize */
switch (params->cipher) {
case WLAN_CIPHER_SUITE_WEP40:
case WLAN_CIPHER_SUITE_TKIP:
case WLAN_CIPHER_SUITE_WEP104:
if (IS_ERR(sdata->local->wep_tx_tfm))
return -EINVAL;
break;
default:
break;
}
key = ieee80211_key_alloc(params->cipher, key_idx, params->key_len,
params->key, params->seq_len, params->seq);
if (IS_ERR(key))
return PTR_ERR(key);
if (pairwise)
key->conf.flags |= IEEE80211_KEY_FLAG_PAIRWISE;
mutex_lock(&sdata->local->sta_mtx);
if (mac_addr) {
sta = sta_info_get_bss(sdata, mac_addr);
if (!sta) {
ieee80211_key_free(sdata->local, key);
err = -ENOENT;
goto out_unlock;
}
}
err = ieee80211_key_link(key, sdata, sta);
if (err)
ieee80211_key_free(sdata->local, key);
out_unlock:
mutex_unlock(&sdata->local->sta_mtx);
return err;
}
static int ieee80211_del_key(struct wiphy *wiphy, struct net_device *dev,
u8 key_idx, bool pairwise, const u8 *mac_addr)
{
struct ieee80211_sub_if_data *sdata;
struct sta_info *sta;
int ret;
sdata = IEEE80211_DEV_TO_SUB_IF(dev);
mutex_lock(&sdata->local->sta_mtx);
if (mac_addr) {
ret = -ENOENT;
sta = sta_info_get_bss(sdata, mac_addr);
if (!sta)
goto out_unlock;
if (pairwise) {
if (sta->ptk) {
ieee80211_key_free(sdata->local, sta->ptk);
ret = 0;
}
} else {
if (sta->gtk[key_idx]) {
ieee80211_key_free(sdata->local,
sta->gtk[key_idx]);
ret = 0;
}
}
goto out_unlock;
}
if (!sdata->keys[key_idx]) {
ret = -ENOENT;
goto out_unlock;
}
ieee80211_key_free(sdata->local, sdata->keys[key_idx]);
WARN_ON(sdata->keys[key_idx]);
ret = 0;
out_unlock:
mutex_unlock(&sdata->local->sta_mtx);
return ret;
}
static int ieee80211_get_key(struct wiphy *wiphy, struct net_device *dev,
u8 key_idx, bool pairwise, const u8 *mac_addr,
void *cookie,
void (*callback)(void *cookie,
struct key_params *params))
{
struct ieee80211_sub_if_data *sdata;
struct sta_info *sta = NULL;
u8 seq[6] = {0};
struct key_params params;
struct ieee80211_key *key = NULL;
u32 iv32;
u16 iv16;
int err = -ENOENT;
sdata = IEEE80211_DEV_TO_SUB_IF(dev);
rcu_read_lock();
if (mac_addr) {
sta = sta_info_get_bss(sdata, mac_addr);
if (!sta)
goto out;
if (pairwise)
key = sta->ptk;
else if (key_idx < NUM_DEFAULT_KEYS)
key = sta->gtk[key_idx];
} else
key = sdata->keys[key_idx];
if (!key)
goto out;
memset(&params, 0, sizeof(params));
params.cipher = key->conf.cipher;
switch (key->conf.cipher) {
case WLAN_CIPHER_SUITE_TKIP:
iv32 = key->u.tkip.tx.iv32;
iv16 = key->u.tkip.tx.iv16;
if (key->flags & KEY_FLAG_UPLOADED_TO_HARDWARE)
drv_get_tkip_seq(sdata->local,
key->conf.hw_key_idx,
&iv32, &iv16);
seq[0] = iv16 & 0xff;
seq[1] = (iv16 >> 8) & 0xff;
seq[2] = iv32 & 0xff;
seq[3] = (iv32 >> 8) & 0xff;
seq[4] = (iv32 >> 16) & 0xff;
seq[5] = (iv32 >> 24) & 0xff;
params.seq = seq;
params.seq_len = 6;
break;
case WLAN_CIPHER_SUITE_CCMP:
seq[0] = key->u.ccmp.tx_pn[5];
seq[1] = key->u.ccmp.tx_pn[4];
seq[2] = key->u.ccmp.tx_pn[3];
seq[3] = key->u.ccmp.tx_pn[2];
seq[4] = key->u.ccmp.tx_pn[1];
seq[5] = key->u.ccmp.tx_pn[0];
params.seq = seq;
params.seq_len = 6;
break;
case WLAN_CIPHER_SUITE_AES_CMAC:
seq[0] = key->u.aes_cmac.tx_pn[5];
seq[1] = key->u.aes_cmac.tx_pn[4];
seq[2] = key->u.aes_cmac.tx_pn[3];
seq[3] = key->u.aes_cmac.tx_pn[2];
seq[4] = key->u.aes_cmac.tx_pn[1];
seq[5] = key->u.aes_cmac.tx_pn[0];
params.seq = seq;
params.seq_len = 6;
break;
}
params.key = key->conf.key;
params.key_len = key->conf.keylen;
callback(cookie, &params);
err = 0;
out:
rcu_read_unlock();
return err;
}
static int ieee80211_config_default_key(struct wiphy *wiphy,
struct net_device *dev,
u8 key_idx)
{
struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
ieee80211_set_default_key(sdata, key_idx);
return 0;
}
static int ieee80211_config_default_mgmt_key(struct wiphy *wiphy,
struct net_device *dev,
u8 key_idx)
{
struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
ieee80211_set_default_mgmt_key(sdata, key_idx);
return 0;
}
static void sta_set_sinfo(struct sta_info *sta, struct station_info *sinfo)
{
struct ieee80211_sub_if_data *sdata = sta->sdata;
sinfo->generation = sdata->local->sta_generation;
sinfo->filled = STATION_INFO_INACTIVE_TIME |
STATION_INFO_RX_BYTES |
STATION_INFO_TX_BYTES |
STATION_INFO_RX_PACKETS |
STATION_INFO_TX_PACKETS |
STATION_INFO_TX_RETRIES |
STATION_INFO_TX_FAILED |
STATION_INFO_TX_BITRATE |
STATION_INFO_RX_DROP_MISC;
sinfo->inactive_time = jiffies_to_msecs(jiffies - sta->last_rx);
sinfo->rx_bytes = sta->rx_bytes;
sinfo->tx_bytes = sta->tx_bytes;
sinfo->rx_packets = sta->rx_packets;
sinfo->tx_packets = sta->tx_packets;
sinfo->tx_retries = sta->tx_retry_count;
sinfo->tx_failed = sta->tx_retry_failed;
sinfo->rx_dropped_misc = sta->rx_dropped;
if ((sta->local->hw.flags & IEEE80211_HW_SIGNAL_DBM) ||
(sta->local->hw.flags & IEEE80211_HW_SIGNAL_UNSPEC)) {
sinfo->filled |= STATION_INFO_SIGNAL;
sinfo->signal = (s8)sta->last_signal;
}
sinfo->txrate.flags = 0;
if (sta->last_tx_rate.flags & IEEE80211_TX_RC_MCS)
sinfo->txrate.flags |= RATE_INFO_FLAGS_MCS;
if (sta->last_tx_rate.flags & IEEE80211_TX_RC_40_MHZ_WIDTH)
sinfo->txrate.flags |= RATE_INFO_FLAGS_40_MHZ_WIDTH;
if (sta->last_tx_rate.flags & IEEE80211_TX_RC_SHORT_GI)
sinfo->txrate.flags |= RATE_INFO_FLAGS_SHORT_GI;
if (!(sta->last_tx_rate.flags & IEEE80211_TX_RC_MCS)) {
struct ieee80211_supported_band *sband;
sband = sta->local->hw.wiphy->bands[
sta->local->hw.conf.channel->band];
sinfo->txrate.legacy =
sband->bitrates[sta->last_tx_rate.idx].bitrate;
} else
sinfo->txrate.mcs = sta->last_tx_rate.idx;
if (ieee80211_vif_is_mesh(&sdata->vif)) {
#ifdef CONFIG_MAC80211_MESH
sinfo->filled |= STATION_INFO_LLID |
STATION_INFO_PLID |
STATION_INFO_PLINK_STATE;
sinfo->llid = le16_to_cpu(sta->llid);
sinfo->plid = le16_to_cpu(sta->plid);
sinfo->plink_state = sta->plink_state;
#endif
}
}
static int ieee80211_dump_station(struct wiphy *wiphy, struct net_device *dev,
int idx, u8 *mac, struct station_info *sinfo)
{
struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
struct sta_info *sta;
int ret = -ENOENT;
rcu_read_lock();
sta = sta_info_get_by_idx(sdata, idx);
if (sta) {
ret = 0;
memcpy(mac, sta->sta.addr, ETH_ALEN);
sta_set_sinfo(sta, sinfo);
}
rcu_read_unlock();
return ret;
}
static int ieee80211_dump_survey(struct wiphy *wiphy, struct net_device *dev,
int idx, struct survey_info *survey)
{
struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
return drv_get_survey(local, idx, survey);
}
static int ieee80211_get_station(struct wiphy *wiphy, struct net_device *dev,
u8 *mac, struct station_info *sinfo)
{
struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
struct sta_info *sta;
int ret = -ENOENT;
rcu_read_lock();
sta = sta_info_get_bss(sdata, mac);
if (sta) {
ret = 0;
sta_set_sinfo(sta, sinfo);
}
rcu_read_unlock();
return ret;
}
/*
* This handles both adding a beacon and setting new beacon info
*/
static int ieee80211_config_beacon(struct ieee80211_sub_if_data *sdata,
struct beacon_parameters *params)
{
struct beacon_data *new, *old;
int new_head_len, new_tail_len;
int size;
int err = -EINVAL;
old = sdata->u.ap.beacon;
/* head must not be zero-length */
if (params->head && !params->head_len)
return -EINVAL;
/*
* This is a kludge. beacon interval should really be part
* of the beacon information.
*/
if (params->interval &&
(sdata->vif.bss_conf.beacon_int != params->interval)) {
sdata->vif.bss_conf.beacon_int = params->interval;
ieee80211_bss_info_change_notify(sdata,
BSS_CHANGED_BEACON_INT);
}
/* Need to have a beacon head if we don't have one yet */
if (!params->head && !old)
return err;
/* sorry, no way to start beaconing without dtim period */
if (!params->dtim_period && !old)
return err;
/* new or old head? */
if (params->head)
new_head_len = params->head_len;
else
new_head_len = old->head_len;
/* new or old tail? */
if (params->tail || !old)
/* params->tail_len will be zero for !params->tail */
new_tail_len = params->tail_len;
else
new_tail_len = old->tail_len;
size = sizeof(*new) + new_head_len + new_tail_len;
new = kzalloc(size, GFP_KERNEL);
if (!new)
return -ENOMEM;
/* start filling the new info now */
/* new or old dtim period? */
if (params->dtim_period)
new->dtim_period = params->dtim_period;
else
new->dtim_period = old->dtim_period;
/*
* pointers go into the block we allocated,
* memory is | beacon_data | head | tail |
*/
new->head = ((u8 *) new) + sizeof(*new);
new->tail = new->head + new_head_len;
new->head_len = new_head_len;
new->tail_len = new_tail_len;
/* copy in head */
if (params->head)
memcpy(new->head, params->head, new_head_len);
else
memcpy(new->head, old->head, new_head_len);
/* copy in optional tail */
if (params->tail)
memcpy(new->tail, params->tail, new_tail_len);
else
if (old)
memcpy(new->tail, old->tail, new_tail_len);
sdata->vif.bss_conf.dtim_period = new->dtim_period;
rcu_assign_pointer(sdata->u.ap.beacon, new);
synchronize_rcu();
kfree(old);
ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_BEACON_ENABLED |
BSS_CHANGED_BEACON);
return 0;
}
static int ieee80211_add_beacon(struct wiphy *wiphy, struct net_device *dev,
struct beacon_parameters *params)
{
struct ieee80211_sub_if_data *sdata;
struct beacon_data *old;
sdata = IEEE80211_DEV_TO_SUB_IF(dev);
old = sdata->u.ap.beacon;
if (old)
return -EALREADY;
return ieee80211_config_beacon(sdata, params);
}
static int ieee80211_set_beacon(struct wiphy *wiphy, struct net_device *dev,
struct beacon_parameters *params)
{
struct ieee80211_sub_if_data *sdata;
struct beacon_data *old;
sdata = IEEE80211_DEV_TO_SUB_IF(dev);
old = sdata->u.ap.beacon;
if (!old)
return -ENOENT;
return ieee80211_config_beacon(sdata, params);
}
static int ieee80211_del_beacon(struct wiphy *wiphy, struct net_device *dev)
{
struct ieee80211_sub_if_data *sdata;
struct beacon_data *old;
sdata = IEEE80211_DEV_TO_SUB_IF(dev);
old = sdata->u.ap.beacon;
if (!old)
return -ENOENT;
rcu_assign_pointer(sdata->u.ap.beacon, NULL);
synchronize_rcu();
kfree(old);
ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_BEACON_ENABLED);
return 0;
}
/* Layer 2 Update frame (802.2 Type 1 LLC XID Update response) */
struct iapp_layer2_update {
u8 da[ETH_ALEN]; /* broadcast */
u8 sa[ETH_ALEN]; /* STA addr */
__be16 len; /* 6 */
u8 dsap; /* 0 */
u8 ssap; /* 0 */
u8 control;
u8 xid_info[3];
} __packed;
static void ieee80211_send_layer2_update(struct sta_info *sta)
{
struct iapp_layer2_update *msg;
struct sk_buff *skb;
/* Send Level 2 Update Frame to update forwarding tables in layer 2
* bridge devices */
skb = dev_alloc_skb(sizeof(*msg));
if (!skb)
return;
msg = (struct iapp_layer2_update *)skb_put(skb, sizeof(*msg));
/* 802.2 Type 1 Logical Link Control (LLC) Exchange Identifier (XID)
* Update response frame; IEEE Std 802.2-1998, 5.4.1.2.1 */
memset(msg->da, 0xff, ETH_ALEN);
memcpy(msg->sa, sta->sta.addr, ETH_ALEN);
msg->len = htons(6);
msg->dsap = 0;
msg->ssap = 0x01; /* NULL LSAP, CR Bit: Response */
msg->control = 0xaf; /* XID response lsb.1111F101.
* F=0 (no poll command; unsolicited frame) */
msg->xid_info[0] = 0x81; /* XID format identifier */
msg->xid_info[1] = 1; /* LLC types/classes: Type 1 LLC */
msg->xid_info[2] = 0; /* XID sender's receive window size (RW) */
skb->dev = sta->sdata->dev;
skb->protocol = eth_type_trans(skb, sta->sdata->dev);
memset(skb->cb, 0, sizeof(skb->cb));
netif_rx_ni(skb);
}
static void sta_apply_parameters(struct ieee80211_local *local,
struct sta_info *sta,
struct station_parameters *params)
{
unsigned long flags;
u32 rates;
int i, j;
struct ieee80211_supported_band *sband;
struct ieee80211_sub_if_data *sdata = sta->sdata;
u32 mask, set;
sband = local->hw.wiphy->bands[local->oper_channel->band];
spin_lock_irqsave(&sta->flaglock, flags);
mask = params->sta_flags_mask;
set = params->sta_flags_set;
if (mask & BIT(NL80211_STA_FLAG_AUTHORIZED)) {
sta->flags &= ~WLAN_STA_AUTHORIZED;
if (set & BIT(NL80211_STA_FLAG_AUTHORIZED))
sta->flags |= WLAN_STA_AUTHORIZED;
}
if (mask & BIT(NL80211_STA_FLAG_SHORT_PREAMBLE)) {
sta->flags &= ~WLAN_STA_SHORT_PREAMBLE;
if (set & BIT(NL80211_STA_FLAG_SHORT_PREAMBLE))
sta->flags |= WLAN_STA_SHORT_PREAMBLE;
}
if (mask & BIT(NL80211_STA_FLAG_WME)) {
sta->flags &= ~WLAN_STA_WME;
if (set & BIT(NL80211_STA_FLAG_WME))
sta->flags |= WLAN_STA_WME;
}
if (mask & BIT(NL80211_STA_FLAG_MFP)) {
sta->flags &= ~WLAN_STA_MFP;
if (set & BIT(NL80211_STA_FLAG_MFP))
sta->flags |= WLAN_STA_MFP;
}
spin_unlock_irqrestore(&sta->flaglock, flags);
/*
* cfg80211 validates this (1-2007) and allows setting the AID
* only when creating a new station entry
*/
if (params->aid)
sta->sta.aid = params->aid;
/*
* FIXME: updating the following information is racy when this
* function is called from ieee80211_change_station().
* However, all this information should be static so
* maybe we should just reject attemps to change it.
*/
if (params->listen_interval >= 0)
sta->listen_interval = params->listen_interval;
if (params->supported_rates) {
rates = 0;
for (i = 0; i < params->supported_rates_len; i++) {
int rate = (params->supported_rates[i] & 0x7f) * 5;
for (j = 0; j < sband->n_bitrates; j++) {
if (sband->bitrates[j].bitrate == rate)
rates |= BIT(j);
}
}
sta->sta.supp_rates[local->oper_channel->band] = rates;
}
if (params->ht_capa)
ieee80211_ht_cap_ie_to_sta_ht_cap(sband,
params->ht_capa,
&sta->sta.ht_cap);
if (ieee80211_vif_is_mesh(&sdata->vif) && params->plink_action) {
switch (params->plink_action) {
case PLINK_ACTION_OPEN:
mesh_plink_open(sta);
break;
case PLINK_ACTION_BLOCK:
mesh_plink_block(sta);
break;
}
}
}
static int ieee80211_add_station(struct wiphy *wiphy, struct net_device *dev,
u8 *mac, struct station_parameters *params)
{
struct ieee80211_local *local = wiphy_priv(wiphy);
struct sta_info *sta;
struct ieee80211_sub_if_data *sdata;
int err;
int layer2_update;
if (params->vlan) {
sdata = IEEE80211_DEV_TO_SUB_IF(params->vlan);
if (sdata->vif.type != NL80211_IFTYPE_AP_VLAN &&
sdata->vif.type != NL80211_IFTYPE_AP)
return -EINVAL;
} else
sdata = IEEE80211_DEV_TO_SUB_IF(dev);
if (compare_ether_addr(mac, sdata->vif.addr) == 0)
return -EINVAL;
if (is_multicast_ether_addr(mac))
return -EINVAL;
sta = sta_info_alloc(sdata, mac, GFP_KERNEL);
if (!sta)
return -ENOMEM;
sta->flags = WLAN_STA_AUTH | WLAN_STA_ASSOC;
sta_apply_parameters(local, sta, params);
rate_control_rate_init(sta);
layer2_update = sdata->vif.type == NL80211_IFTYPE_AP_VLAN ||
sdata->vif.type == NL80211_IFTYPE_AP;
err = sta_info_insert_rcu(sta);
if (err) {
rcu_read_unlock();
return err;
}
if (layer2_update)
ieee80211_send_layer2_update(sta);
rcu_read_unlock();
return 0;
}
static int ieee80211_del_station(struct wiphy *wiphy, struct net_device *dev,
u8 *mac)
{
struct ieee80211_local *local = wiphy_priv(wiphy);
struct ieee80211_sub_if_data *sdata;
sdata = IEEE80211_DEV_TO_SUB_IF(dev);
if (mac)
return sta_info_destroy_addr_bss(sdata, mac);
sta_info_flush(local, sdata);
return 0;
}
static int ieee80211_change_station(struct wiphy *wiphy,
struct net_device *dev,
u8 *mac,
struct station_parameters *params)
{
struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
struct ieee80211_local *local = wiphy_priv(wiphy);
struct sta_info *sta;
struct ieee80211_sub_if_data *vlansdata;
rcu_read_lock();
sta = sta_info_get_bss(sdata, mac);
if (!sta) {
rcu_read_unlock();
return -ENOENT;
}
if (params->vlan && params->vlan != sta->sdata->dev) {
vlansdata = IEEE80211_DEV_TO_SUB_IF(params->vlan);
if (vlansdata->vif.type != NL80211_IFTYPE_AP_VLAN &&
vlansdata->vif.type != NL80211_IFTYPE_AP) {
rcu_read_unlock();
return -EINVAL;
}
if (params->vlan->ieee80211_ptr->use_4addr) {
if (vlansdata->u.vlan.sta) {
rcu_read_unlock();
return -EBUSY;
}
rcu_assign_pointer(vlansdata->u.vlan.sta, sta);
}
sta->sdata = vlansdata;
ieee80211_send_layer2_update(sta);
}
sta_apply_parameters(local, sta, params);
rcu_read_unlock();
return 0;
}
#ifdef CONFIG_MAC80211_MESH
static int ieee80211_add_mpath(struct wiphy *wiphy, struct net_device *dev,
u8 *dst, u8 *next_hop)
{
struct ieee80211_sub_if_data *sdata;
struct mesh_path *mpath;
struct sta_info *sta;
int err;
sdata = IEEE80211_DEV_TO_SUB_IF(dev);
rcu_read_lock();
sta = sta_info_get(sdata, next_hop);
if (!sta) {
rcu_read_unlock();
return -ENOENT;
}
err = mesh_path_add(dst, sdata);
if (err) {
rcu_read_unlock();
return err;
}
mpath = mesh_path_lookup(dst, sdata);
if (!mpath) {
rcu_read_unlock();
return -ENXIO;
}
mesh_path_fix_nexthop(mpath, sta);
rcu_read_unlock();
return 0;
}
static int ieee80211_del_mpath(struct wiphy *wiphy, struct net_device *dev,
u8 *dst)
{
struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
if (dst)
return mesh_path_del(dst, sdata);
mesh_path_flush(sdata);
return 0;
}
static int ieee80211_change_mpath(struct wiphy *wiphy,
struct net_device *dev,
u8 *dst, u8 *next_hop)
{
struct ieee80211_sub_if_data *sdata;
struct mesh_path *mpath;
struct sta_info *sta;
sdata = IEEE80211_DEV_TO_SUB_IF(dev);
rcu_read_lock();
sta = sta_info_get(sdata, next_hop);
if (!sta) {
rcu_read_unlock();
return -ENOENT;
}
mpath = mesh_path_lookup(dst, sdata);
if (!mpath) {
rcu_read_unlock();
return -ENOENT;
}
mesh_path_fix_nexthop(mpath, sta);
rcu_read_unlock();
return 0;
}
static void mpath_set_pinfo(struct mesh_path *mpath, u8 *next_hop,
struct mpath_info *pinfo)
{
if (mpath->next_hop)
memcpy(next_hop, mpath->next_hop->sta.addr, ETH_ALEN);
else
memset(next_hop, 0, ETH_ALEN);
pinfo->generation = mesh_paths_generation;
pinfo->filled = MPATH_INFO_FRAME_QLEN |
MPATH_INFO_SN |
MPATH_INFO_METRIC |
MPATH_INFO_EXPTIME |
MPATH_INFO_DISCOVERY_TIMEOUT |
MPATH_INFO_DISCOVERY_RETRIES |
MPATH_INFO_FLAGS;
pinfo->frame_qlen = mpath->frame_queue.qlen;
pinfo->sn = mpath->sn;
pinfo->metric = mpath->metric;
if (time_before(jiffies, mpath->exp_time))
pinfo->exptime = jiffies_to_msecs(mpath->exp_time - jiffies);
pinfo->discovery_timeout =
jiffies_to_msecs(mpath->discovery_timeout);
pinfo->discovery_retries = mpath->discovery_retries;
pinfo->flags = 0;
if (mpath->flags & MESH_PATH_ACTIVE)
pinfo->flags |= NL80211_MPATH_FLAG_ACTIVE;
if (mpath->flags & MESH_PATH_RESOLVING)
pinfo->flags |= NL80211_MPATH_FLAG_RESOLVING;
if (mpath->flags & MESH_PATH_SN_VALID)
pinfo->flags |= NL80211_MPATH_FLAG_SN_VALID;
if (mpath->flags & MESH_PATH_FIXED)
pinfo->flags |= NL80211_MPATH_FLAG_FIXED;
if (mpath->flags & MESH_PATH_RESOLVING)
pinfo->flags |= NL80211_MPATH_FLAG_RESOLVING;
pinfo->flags = mpath->flags;
}
static int ieee80211_get_mpath(struct wiphy *wiphy, struct net_device *dev,
u8 *dst, u8 *next_hop, struct mpath_info *pinfo)
{
struct ieee80211_sub_if_data *sdata;
struct mesh_path *mpath;
sdata = IEEE80211_DEV_TO_SUB_IF(dev);
rcu_read_lock();
mpath = mesh_path_lookup(dst, sdata);
if (!mpath) {
rcu_read_unlock();
return -ENOENT;
}
memcpy(dst, mpath->dst, ETH_ALEN);
mpath_set_pinfo(mpath, next_hop, pinfo);
rcu_read_unlock();
return 0;
}
static int ieee80211_dump_mpath(struct wiphy *wiphy, struct net_device *dev,
int idx, u8 *dst, u8 *next_hop,
struct mpath_info *pinfo)
{
struct ieee80211_sub_if_data *sdata;
struct mesh_path *mpath;
sdata = IEEE80211_DEV_TO_SUB_IF(dev);
rcu_read_lock();
mpath = mesh_path_lookup_by_idx(idx, sdata);
if (!mpath) {
rcu_read_unlock();
return -ENOENT;
}
memcpy(dst, mpath->dst, ETH_ALEN);
mpath_set_pinfo(mpath, next_hop, pinfo);
rcu_read_unlock();
return 0;
}
static int ieee80211_get_mesh_params(struct wiphy *wiphy,
struct net_device *dev,
struct mesh_config *conf)
{
struct ieee80211_sub_if_data *sdata;
sdata = IEEE80211_DEV_TO_SUB_IF(dev);
memcpy(conf, &(sdata->u.mesh.mshcfg), sizeof(struct mesh_config));
return 0;
}
static inline bool _chg_mesh_attr(enum nl80211_meshconf_params parm, u32 mask)
{
return (mask >> (parm-1)) & 0x1;
}
static int ieee80211_set_mesh_params(struct wiphy *wiphy,
struct net_device *dev,
const struct mesh_config *nconf, u32 mask)
{
struct mesh_config *conf;
struct ieee80211_sub_if_data *sdata;
struct ieee80211_if_mesh *ifmsh;
sdata = IEEE80211_DEV_TO_SUB_IF(dev);
ifmsh = &sdata->u.mesh;
/* Set the config options which we are interested in setting */
conf = &(sdata->u.mesh.mshcfg);
if (_chg_mesh_attr(NL80211_MESHCONF_RETRY_TIMEOUT, mask))
conf->dot11MeshRetryTimeout = nconf->dot11MeshRetryTimeout;
if (_chg_mesh_attr(NL80211_MESHCONF_CONFIRM_TIMEOUT, mask))
conf->dot11MeshConfirmTimeout = nconf->dot11MeshConfirmTimeout;
if (_chg_mesh_attr(NL80211_MESHCONF_HOLDING_TIMEOUT, mask))
conf->dot11MeshHoldingTimeout = nconf->dot11MeshHoldingTimeout;
if (_chg_mesh_attr(NL80211_MESHCONF_MAX_PEER_LINKS, mask))
conf->dot11MeshMaxPeerLinks = nconf->dot11MeshMaxPeerLinks;
if (_chg_mesh_attr(NL80211_MESHCONF_MAX_RETRIES, mask))
conf->dot11MeshMaxRetries = nconf->dot11MeshMaxRetries;
if (_chg_mesh_attr(NL80211_MESHCONF_TTL, mask))
conf->dot11MeshTTL = nconf->dot11MeshTTL;
if (_chg_mesh_attr(NL80211_MESHCONF_AUTO_OPEN_PLINKS, mask))
conf->auto_open_plinks = nconf->auto_open_plinks;
if (_chg_mesh_attr(NL80211_MESHCONF_HWMP_MAX_PREQ_RETRIES, mask))
conf->dot11MeshHWMPmaxPREQretries =
nconf->dot11MeshHWMPmaxPREQretries;
if (_chg_mesh_attr(NL80211_MESHCONF_PATH_REFRESH_TIME, mask))
conf->path_refresh_time = nconf->path_refresh_time;
if (_chg_mesh_attr(NL80211_MESHCONF_MIN_DISCOVERY_TIMEOUT, mask))
conf->min_discovery_timeout = nconf->min_discovery_timeout;
if (_chg_mesh_attr(NL80211_MESHCONF_HWMP_ACTIVE_PATH_TIMEOUT, mask))
conf->dot11MeshHWMPactivePathTimeout =
nconf->dot11MeshHWMPactivePathTimeout;
if (_chg_mesh_attr(NL80211_MESHCONF_HWMP_PREQ_MIN_INTERVAL, mask))
conf->dot11MeshHWMPpreqMinInterval =
nconf->dot11MeshHWMPpreqMinInterval;
if (_chg_mesh_attr(NL80211_MESHCONF_HWMP_NET_DIAM_TRVS_TIME,
mask))
conf->dot11MeshHWMPnetDiameterTraversalTime =
nconf->dot11MeshHWMPnetDiameterTraversalTime;
if (_chg_mesh_attr(NL80211_MESHCONF_HWMP_ROOTMODE, mask)) {
conf->dot11MeshHWMPRootMode = nconf->dot11MeshHWMPRootMode;
ieee80211_mesh_root_setup(ifmsh);
}
return 0;
}
#endif
static int ieee80211_change_bss(struct wiphy *wiphy,
struct net_device *dev,
struct bss_parameters *params)
{
struct ieee80211_sub_if_data *sdata;
u32 changed = 0;
sdata = IEEE80211_DEV_TO_SUB_IF(dev);
if (params->use_cts_prot >= 0) {
sdata->vif.bss_conf.use_cts_prot = params->use_cts_prot;
changed |= BSS_CHANGED_ERP_CTS_PROT;
}
if (params->use_short_preamble >= 0) {
sdata->vif.bss_conf.use_short_preamble =
params->use_short_preamble;
changed |= BSS_CHANGED_ERP_PREAMBLE;
}
if (!sdata->vif.bss_conf.use_short_slot &&
sdata->local->hw.conf.channel->band == IEEE80211_BAND_5GHZ) {
sdata->vif.bss_conf.use_short_slot = true;
changed |= BSS_CHANGED_ERP_SLOT;
}
if (params->use_short_slot_time >= 0) {
sdata->vif.bss_conf.use_short_slot =
params->use_short_slot_time;
changed |= BSS_CHANGED_ERP_SLOT;
}
if (params->basic_rates) {
int i, j;
u32 rates = 0;
struct ieee80211_local *local = wiphy_priv(wiphy);
struct ieee80211_supported_band *sband =
wiphy->bands[local->oper_channel->band];
for (i = 0; i < params->basic_rates_len; i++) {
int rate = (params->basic_rates[i] & 0x7f) * 5;
for (j = 0; j < sband->n_bitrates; j++) {
if (sband->bitrates[j].bitrate == rate)
rates |= BIT(j);
}
}
sdata->vif.bss_conf.basic_rates = rates;
changed |= BSS_CHANGED_BASIC_RATES;
}
if (params->ap_isolate >= 0) {
if (params->ap_isolate)
sdata->flags |= IEEE80211_SDATA_DONT_BRIDGE_PACKETS;
else
sdata->flags &= ~IEEE80211_SDATA_DONT_BRIDGE_PACKETS;
}
ieee80211_bss_info_change_notify(sdata, changed);
return 0;
}
static int ieee80211_set_txq_params(struct wiphy *wiphy,
struct ieee80211_txq_params *params)
{
struct ieee80211_local *local = wiphy_priv(wiphy);
struct ieee80211_tx_queue_params p;
if (!local->ops->conf_tx)
return -EOPNOTSUPP;
memset(&p, 0, sizeof(p));
p.aifs = params->aifs;
p.cw_max = params->cwmax;
p.cw_min = params->cwmin;
p.txop = params->txop;
/*
* Setting tx queue params disables u-apsd because it's only
* called in master mode.
*/
p.uapsd = false;
if (drv_conf_tx(local, params->queue, &p)) {
wiphy_debug(local->hw.wiphy,
"failed to set TX queue parameters for queue %d\n",
params->queue);
return -EINVAL;
}
return 0;
}
static int ieee80211_set_channel(struct wiphy *wiphy,
cfg80211/mac80211: better channel handling Currently (all tested with hwsim) you can do stupid things like setting up an AP on a certain channel, then adding another virtual interface and making that associate on another channel -- this will make the beaconing to move channel but obviously without the necessary IEs data update. In order to improve this situation, first make the configuration APIs (cfg80211 and nl80211) aware of multi-channel operation -- we'll eventually need that in the future anyway. There's one userland API change and one API addition. The API change is that now SET_WIPHY must be called with virtual interface index rather than only wiphy index in order to take effect for that interface -- luckily all current users (hostapd) do that. For monitor interfaces, the old setting is preserved, but monitors are always slaved to other devices anyway so no guarantees. The second userland API change is the introduction of a per virtual interface SET_CHANNEL command, that hostapd should use going forward to make it easier to understand what's going on (it can automatically detect a kernel with this command). Other than mac80211, no existing cfg80211 drivers are affected by this change because they only allow a single virtual interface. mac80211, however, now needs to be aware that the channel settings are per interface now, and needs to disallow (for now) real multi-channel operation, which is another important part of this patch. One of the immediate benefits is that you can now start hostapd to operate on a hardware that already has a connection on another virtual interface, as long as you specify the same channel. Note that two things are left unhandled (this is an improvement -- not a complete fix): * different HT/no-HT modes currently you could start an HT AP and then connect to a non-HT network on the same channel which would configure the hardware for no HT; that can be fixed fairly easily * CSA An AP we're connected to on a virtual interface might indicate switching channels, and in that case we would follow it, regardless of how many other interfaces are operating; this requires more effort to fix but is pretty rare after all Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-05-05 13:25:02 +00:00
struct net_device *netdev,
struct ieee80211_channel *chan,
enum nl80211_channel_type channel_type)
{
struct ieee80211_local *local = wiphy_priv(wiphy);
struct ieee80211_sub_if_data *sdata = NULL;
if (netdev)
sdata = IEEE80211_DEV_TO_SUB_IF(netdev);
cfg80211/mac80211: better channel handling Currently (all tested with hwsim) you can do stupid things like setting up an AP on a certain channel, then adding another virtual interface and making that associate on another channel -- this will make the beaconing to move channel but obviously without the necessary IEs data update. In order to improve this situation, first make the configuration APIs (cfg80211 and nl80211) aware of multi-channel operation -- we'll eventually need that in the future anyway. There's one userland API change and one API addition. The API change is that now SET_WIPHY must be called with virtual interface index rather than only wiphy index in order to take effect for that interface -- luckily all current users (hostapd) do that. For monitor interfaces, the old setting is preserved, but monitors are always slaved to other devices anyway so no guarantees. The second userland API change is the introduction of a per virtual interface SET_CHANNEL command, that hostapd should use going forward to make it easier to understand what's going on (it can automatically detect a kernel with this command). Other than mac80211, no existing cfg80211 drivers are affected by this change because they only allow a single virtual interface. mac80211, however, now needs to be aware that the channel settings are per interface now, and needs to disallow (for now) real multi-channel operation, which is another important part of this patch. One of the immediate benefits is that you can now start hostapd to operate on a hardware that already has a connection on another virtual interface, as long as you specify the same channel. Note that two things are left unhandled (this is an improvement -- not a complete fix): * different HT/no-HT modes currently you could start an HT AP and then connect to a non-HT network on the same channel which would configure the hardware for no HT; that can be fixed fairly easily * CSA An AP we're connected to on a virtual interface might indicate switching channels, and in that case we would follow it, regardless of how many other interfaces are operating; this requires more effort to fix but is pretty rare after all Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-05-05 13:25:02 +00:00
switch (ieee80211_get_channel_mode(local, NULL)) {
case CHAN_MODE_HOPPING:
return -EBUSY;
case CHAN_MODE_FIXED:
if (local->oper_channel != chan)
return -EBUSY;
if (!sdata && local->_oper_channel_type == channel_type)
cfg80211/mac80211: better channel handling Currently (all tested with hwsim) you can do stupid things like setting up an AP on a certain channel, then adding another virtual interface and making that associate on another channel -- this will make the beaconing to move channel but obviously without the necessary IEs data update. In order to improve this situation, first make the configuration APIs (cfg80211 and nl80211) aware of multi-channel operation -- we'll eventually need that in the future anyway. There's one userland API change and one API addition. The API change is that now SET_WIPHY must be called with virtual interface index rather than only wiphy index in order to take effect for that interface -- luckily all current users (hostapd) do that. For monitor interfaces, the old setting is preserved, but monitors are always slaved to other devices anyway so no guarantees. The second userland API change is the introduction of a per virtual interface SET_CHANNEL command, that hostapd should use going forward to make it easier to understand what's going on (it can automatically detect a kernel with this command). Other than mac80211, no existing cfg80211 drivers are affected by this change because they only allow a single virtual interface. mac80211, however, now needs to be aware that the channel settings are per interface now, and needs to disallow (for now) real multi-channel operation, which is another important part of this patch. One of the immediate benefits is that you can now start hostapd to operate on a hardware that already has a connection on another virtual interface, as long as you specify the same channel. Note that two things are left unhandled (this is an improvement -- not a complete fix): * different HT/no-HT modes currently you could start an HT AP and then connect to a non-HT network on the same channel which would configure the hardware for no HT; that can be fixed fairly easily * CSA An AP we're connected to on a virtual interface might indicate switching channels, and in that case we would follow it, regardless of how many other interfaces are operating; this requires more effort to fix but is pretty rare after all Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-05-05 13:25:02 +00:00
return 0;
break;
cfg80211/mac80211: better channel handling Currently (all tested with hwsim) you can do stupid things like setting up an AP on a certain channel, then adding another virtual interface and making that associate on another channel -- this will make the beaconing to move channel but obviously without the necessary IEs data update. In order to improve this situation, first make the configuration APIs (cfg80211 and nl80211) aware of multi-channel operation -- we'll eventually need that in the future anyway. There's one userland API change and one API addition. The API change is that now SET_WIPHY must be called with virtual interface index rather than only wiphy index in order to take effect for that interface -- luckily all current users (hostapd) do that. For monitor interfaces, the old setting is preserved, but monitors are always slaved to other devices anyway so no guarantees. The second userland API change is the introduction of a per virtual interface SET_CHANNEL command, that hostapd should use going forward to make it easier to understand what's going on (it can automatically detect a kernel with this command). Other than mac80211, no existing cfg80211 drivers are affected by this change because they only allow a single virtual interface. mac80211, however, now needs to be aware that the channel settings are per interface now, and needs to disallow (for now) real multi-channel operation, which is another important part of this patch. One of the immediate benefits is that you can now start hostapd to operate on a hardware that already has a connection on another virtual interface, as long as you specify the same channel. Note that two things are left unhandled (this is an improvement -- not a complete fix): * different HT/no-HT modes currently you could start an HT AP and then connect to a non-HT network on the same channel which would configure the hardware for no HT; that can be fixed fairly easily * CSA An AP we're connected to on a virtual interface might indicate switching channels, and in that case we would follow it, regardless of how many other interfaces are operating; this requires more effort to fix but is pretty rare after all Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-05-05 13:25:02 +00:00
case CHAN_MODE_UNDEFINED:
break;
}
local->oper_channel = chan;
if (!ieee80211_set_channel_type(local, sdata, channel_type))
return -EBUSY;
ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_CHANNEL);
if (sdata && sdata->vif.type != NL80211_IFTYPE_MONITOR)
ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_HT);
return 0;
}
#ifdef CONFIG_PM
static int ieee80211_suspend(struct wiphy *wiphy)
{
return __ieee80211_suspend(wiphy_priv(wiphy));
}
static int ieee80211_resume(struct wiphy *wiphy)
{
return __ieee80211_resume(wiphy_priv(wiphy));
}
#else
#define ieee80211_suspend NULL
#define ieee80211_resume NULL
#endif
static int ieee80211_scan(struct wiphy *wiphy,
struct net_device *dev,
struct cfg80211_scan_request *req)
{
struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
switch (ieee80211_vif_type_p2p(&sdata->vif)) {
case NL80211_IFTYPE_STATION:
case NL80211_IFTYPE_ADHOC:
case NL80211_IFTYPE_MESH_POINT:
case NL80211_IFTYPE_P2P_CLIENT:
break;
case NL80211_IFTYPE_P2P_GO:
if (sdata->local->ops->hw_scan)
break;
/* FIXME: implement NoA while scanning in software */
return -EOPNOTSUPP;
case NL80211_IFTYPE_AP:
if (sdata->u.ap.beacon)
return -EOPNOTSUPP;
break;
default:
return -EOPNOTSUPP;
}
return ieee80211_request_scan(sdata, req);
}
nl80211: Add MLME primitives to support external SME This patch adds new nl80211 commands to allow user space to request authentication and association (and also deauthentication and disassociation). The commands are structured to allow separate authentication and association steps, i.e., the interface between kernel and user space is similar to the MLME SAP interface in IEEE 802.11 standard and an user space application takes the role of the SME. The patch introduces MLME-AUTHENTICATE.request, MLME-{,RE}ASSOCIATE.request, MLME-DEAUTHENTICATE.request, and MLME-DISASSOCIATE.request primitives. The authentication and association commands request the actual operations in two steps (assuming the driver supports this; if not, separate authentication step is skipped; this could end up being a separate "connect" command). The initial implementation for mac80211 uses the current net/mac80211/mlme.c for actual sending and processing of management frames and the new nl80211 commands will just stop the current state machine from moving automatically from authentication to association. Future cleanup may move more of the MLME operations into cfg80211. The goal of this design is to provide more control of authentication and association process to user space without having to move the full MLME implementation. This should be enough to allow IEEE 802.11r FT protocol and 802.11s SAE authentication to be implemented. Obviously, this will also bring the extra benefit of not having to use WEXT for association requests with mac80211. An example implementation of a user space SME using the new nl80211 commands is available for wpa_supplicant. This patch is enough to get IEEE 802.11r FT protocol working with over-the-air mechanism (over-the-DS will need additional MLME primitives for handling the FT Action frames). Signed-off-by: Jouni Malinen <j@w1.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-19 11:39:22 +00:00
static int ieee80211_auth(struct wiphy *wiphy, struct net_device *dev,
struct cfg80211_auth_request *req)
{
return ieee80211_mgd_auth(IEEE80211_DEV_TO_SUB_IF(dev), req);
nl80211: Add MLME primitives to support external SME This patch adds new nl80211 commands to allow user space to request authentication and association (and also deauthentication and disassociation). The commands are structured to allow separate authentication and association steps, i.e., the interface between kernel and user space is similar to the MLME SAP interface in IEEE 802.11 standard and an user space application takes the role of the SME. The patch introduces MLME-AUTHENTICATE.request, MLME-{,RE}ASSOCIATE.request, MLME-DEAUTHENTICATE.request, and MLME-DISASSOCIATE.request primitives. The authentication and association commands request the actual operations in two steps (assuming the driver supports this; if not, separate authentication step is skipped; this could end up being a separate "connect" command). The initial implementation for mac80211 uses the current net/mac80211/mlme.c for actual sending and processing of management frames and the new nl80211 commands will just stop the current state machine from moving automatically from authentication to association. Future cleanup may move more of the MLME operations into cfg80211. The goal of this design is to provide more control of authentication and association process to user space without having to move the full MLME implementation. This should be enough to allow IEEE 802.11r FT protocol and 802.11s SAE authentication to be implemented. Obviously, this will also bring the extra benefit of not having to use WEXT for association requests with mac80211. An example implementation of a user space SME using the new nl80211 commands is available for wpa_supplicant. This patch is enough to get IEEE 802.11r FT protocol working with over-the-air mechanism (over-the-DS will need additional MLME primitives for handling the FT Action frames). Signed-off-by: Jouni Malinen <j@w1.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-19 11:39:22 +00:00
}
static int ieee80211_assoc(struct wiphy *wiphy, struct net_device *dev,
struct cfg80211_assoc_request *req)
{
cfg80211/mac80211: better channel handling Currently (all tested with hwsim) you can do stupid things like setting up an AP on a certain channel, then adding another virtual interface and making that associate on another channel -- this will make the beaconing to move channel but obviously without the necessary IEs data update. In order to improve this situation, first make the configuration APIs (cfg80211 and nl80211) aware of multi-channel operation -- we'll eventually need that in the future anyway. There's one userland API change and one API addition. The API change is that now SET_WIPHY must be called with virtual interface index rather than only wiphy index in order to take effect for that interface -- luckily all current users (hostapd) do that. For monitor interfaces, the old setting is preserved, but monitors are always slaved to other devices anyway so no guarantees. The second userland API change is the introduction of a per virtual interface SET_CHANNEL command, that hostapd should use going forward to make it easier to understand what's going on (it can automatically detect a kernel with this command). Other than mac80211, no existing cfg80211 drivers are affected by this change because they only allow a single virtual interface. mac80211, however, now needs to be aware that the channel settings are per interface now, and needs to disallow (for now) real multi-channel operation, which is another important part of this patch. One of the immediate benefits is that you can now start hostapd to operate on a hardware that already has a connection on another virtual interface, as long as you specify the same channel. Note that two things are left unhandled (this is an improvement -- not a complete fix): * different HT/no-HT modes currently you could start an HT AP and then connect to a non-HT network on the same channel which would configure the hardware for no HT; that can be fixed fairly easily * CSA An AP we're connected to on a virtual interface might indicate switching channels, and in that case we would follow it, regardless of how many other interfaces are operating; this requires more effort to fix but is pretty rare after all Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-05-05 13:25:02 +00:00
struct ieee80211_local *local = wiphy_priv(wiphy);
struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
switch (ieee80211_get_channel_mode(local, sdata)) {
case CHAN_MODE_HOPPING:
return -EBUSY;
case CHAN_MODE_FIXED:
if (local->oper_channel == req->bss->channel)
break;
return -EBUSY;
case CHAN_MODE_UNDEFINED:
break;
}
return ieee80211_mgd_assoc(IEEE80211_DEV_TO_SUB_IF(dev), req);
nl80211: Add MLME primitives to support external SME This patch adds new nl80211 commands to allow user space to request authentication and association (and also deauthentication and disassociation). The commands are structured to allow separate authentication and association steps, i.e., the interface between kernel and user space is similar to the MLME SAP interface in IEEE 802.11 standard and an user space application takes the role of the SME. The patch introduces MLME-AUTHENTICATE.request, MLME-{,RE}ASSOCIATE.request, MLME-DEAUTHENTICATE.request, and MLME-DISASSOCIATE.request primitives. The authentication and association commands request the actual operations in two steps (assuming the driver supports this; if not, separate authentication step is skipped; this could end up being a separate "connect" command). The initial implementation for mac80211 uses the current net/mac80211/mlme.c for actual sending and processing of management frames and the new nl80211 commands will just stop the current state machine from moving automatically from authentication to association. Future cleanup may move more of the MLME operations into cfg80211. The goal of this design is to provide more control of authentication and association process to user space without having to move the full MLME implementation. This should be enough to allow IEEE 802.11r FT protocol and 802.11s SAE authentication to be implemented. Obviously, this will also bring the extra benefit of not having to use WEXT for association requests with mac80211. An example implementation of a user space SME using the new nl80211 commands is available for wpa_supplicant. This patch is enough to get IEEE 802.11r FT protocol working with over-the-air mechanism (over-the-DS will need additional MLME primitives for handling the FT Action frames). Signed-off-by: Jouni Malinen <j@w1.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-19 11:39:22 +00:00
}
static int ieee80211_deauth(struct wiphy *wiphy, struct net_device *dev,
struct cfg80211_deauth_request *req,
void *cookie)
nl80211: Add MLME primitives to support external SME This patch adds new nl80211 commands to allow user space to request authentication and association (and also deauthentication and disassociation). The commands are structured to allow separate authentication and association steps, i.e., the interface between kernel and user space is similar to the MLME SAP interface in IEEE 802.11 standard and an user space application takes the role of the SME. The patch introduces MLME-AUTHENTICATE.request, MLME-{,RE}ASSOCIATE.request, MLME-DEAUTHENTICATE.request, and MLME-DISASSOCIATE.request primitives. The authentication and association commands request the actual operations in two steps (assuming the driver supports this; if not, separate authentication step is skipped; this could end up being a separate "connect" command). The initial implementation for mac80211 uses the current net/mac80211/mlme.c for actual sending and processing of management frames and the new nl80211 commands will just stop the current state machine from moving automatically from authentication to association. Future cleanup may move more of the MLME operations into cfg80211. The goal of this design is to provide more control of authentication and association process to user space without having to move the full MLME implementation. This should be enough to allow IEEE 802.11r FT protocol and 802.11s SAE authentication to be implemented. Obviously, this will also bring the extra benefit of not having to use WEXT for association requests with mac80211. An example implementation of a user space SME using the new nl80211 commands is available for wpa_supplicant. This patch is enough to get IEEE 802.11r FT protocol working with over-the-air mechanism (over-the-DS will need additional MLME primitives for handling the FT Action frames). Signed-off-by: Jouni Malinen <j@w1.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-19 11:39:22 +00:00
{
return ieee80211_mgd_deauth(IEEE80211_DEV_TO_SUB_IF(dev),
req, cookie);
nl80211: Add MLME primitives to support external SME This patch adds new nl80211 commands to allow user space to request authentication and association (and also deauthentication and disassociation). The commands are structured to allow separate authentication and association steps, i.e., the interface between kernel and user space is similar to the MLME SAP interface in IEEE 802.11 standard and an user space application takes the role of the SME. The patch introduces MLME-AUTHENTICATE.request, MLME-{,RE}ASSOCIATE.request, MLME-DEAUTHENTICATE.request, and MLME-DISASSOCIATE.request primitives. The authentication and association commands request the actual operations in two steps (assuming the driver supports this; if not, separate authentication step is skipped; this could end up being a separate "connect" command). The initial implementation for mac80211 uses the current net/mac80211/mlme.c for actual sending and processing of management frames and the new nl80211 commands will just stop the current state machine from moving automatically from authentication to association. Future cleanup may move more of the MLME operations into cfg80211. The goal of this design is to provide more control of authentication and association process to user space without having to move the full MLME implementation. This should be enough to allow IEEE 802.11r FT protocol and 802.11s SAE authentication to be implemented. Obviously, this will also bring the extra benefit of not having to use WEXT for association requests with mac80211. An example implementation of a user space SME using the new nl80211 commands is available for wpa_supplicant. This patch is enough to get IEEE 802.11r FT protocol working with over-the-air mechanism (over-the-DS will need additional MLME primitives for handling the FT Action frames). Signed-off-by: Jouni Malinen <j@w1.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-19 11:39:22 +00:00
}
static int ieee80211_disassoc(struct wiphy *wiphy, struct net_device *dev,
struct cfg80211_disassoc_request *req,
void *cookie)
nl80211: Add MLME primitives to support external SME This patch adds new nl80211 commands to allow user space to request authentication and association (and also deauthentication and disassociation). The commands are structured to allow separate authentication and association steps, i.e., the interface between kernel and user space is similar to the MLME SAP interface in IEEE 802.11 standard and an user space application takes the role of the SME. The patch introduces MLME-AUTHENTICATE.request, MLME-{,RE}ASSOCIATE.request, MLME-DEAUTHENTICATE.request, and MLME-DISASSOCIATE.request primitives. The authentication and association commands request the actual operations in two steps (assuming the driver supports this; if not, separate authentication step is skipped; this could end up being a separate "connect" command). The initial implementation for mac80211 uses the current net/mac80211/mlme.c for actual sending and processing of management frames and the new nl80211 commands will just stop the current state machine from moving automatically from authentication to association. Future cleanup may move more of the MLME operations into cfg80211. The goal of this design is to provide more control of authentication and association process to user space without having to move the full MLME implementation. This should be enough to allow IEEE 802.11r FT protocol and 802.11s SAE authentication to be implemented. Obviously, this will also bring the extra benefit of not having to use WEXT for association requests with mac80211. An example implementation of a user space SME using the new nl80211 commands is available for wpa_supplicant. This patch is enough to get IEEE 802.11r FT protocol working with over-the-air mechanism (over-the-DS will need additional MLME primitives for handling the FT Action frames). Signed-off-by: Jouni Malinen <j@w1.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-19 11:39:22 +00:00
{
return ieee80211_mgd_disassoc(IEEE80211_DEV_TO_SUB_IF(dev),
req, cookie);
nl80211: Add MLME primitives to support external SME This patch adds new nl80211 commands to allow user space to request authentication and association (and also deauthentication and disassociation). The commands are structured to allow separate authentication and association steps, i.e., the interface between kernel and user space is similar to the MLME SAP interface in IEEE 802.11 standard and an user space application takes the role of the SME. The patch introduces MLME-AUTHENTICATE.request, MLME-{,RE}ASSOCIATE.request, MLME-DEAUTHENTICATE.request, and MLME-DISASSOCIATE.request primitives. The authentication and association commands request the actual operations in two steps (assuming the driver supports this; if not, separate authentication step is skipped; this could end up being a separate "connect" command). The initial implementation for mac80211 uses the current net/mac80211/mlme.c for actual sending and processing of management frames and the new nl80211 commands will just stop the current state machine from moving automatically from authentication to association. Future cleanup may move more of the MLME operations into cfg80211. The goal of this design is to provide more control of authentication and association process to user space without having to move the full MLME implementation. This should be enough to allow IEEE 802.11r FT protocol and 802.11s SAE authentication to be implemented. Obviously, this will also bring the extra benefit of not having to use WEXT for association requests with mac80211. An example implementation of a user space SME using the new nl80211 commands is available for wpa_supplicant. This patch is enough to get IEEE 802.11r FT protocol working with over-the-air mechanism (over-the-DS will need additional MLME primitives for handling the FT Action frames). Signed-off-by: Jouni Malinen <j@w1.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-19 11:39:22 +00:00
}
static int ieee80211_join_ibss(struct wiphy *wiphy, struct net_device *dev,
struct cfg80211_ibss_params *params)
{
cfg80211/mac80211: better channel handling Currently (all tested with hwsim) you can do stupid things like setting up an AP on a certain channel, then adding another virtual interface and making that associate on another channel -- this will make the beaconing to move channel but obviously without the necessary IEs data update. In order to improve this situation, first make the configuration APIs (cfg80211 and nl80211) aware of multi-channel operation -- we'll eventually need that in the future anyway. There's one userland API change and one API addition. The API change is that now SET_WIPHY must be called with virtual interface index rather than only wiphy index in order to take effect for that interface -- luckily all current users (hostapd) do that. For monitor interfaces, the old setting is preserved, but monitors are always slaved to other devices anyway so no guarantees. The second userland API change is the introduction of a per virtual interface SET_CHANNEL command, that hostapd should use going forward to make it easier to understand what's going on (it can automatically detect a kernel with this command). Other than mac80211, no existing cfg80211 drivers are affected by this change because they only allow a single virtual interface. mac80211, however, now needs to be aware that the channel settings are per interface now, and needs to disallow (for now) real multi-channel operation, which is another important part of this patch. One of the immediate benefits is that you can now start hostapd to operate on a hardware that already has a connection on another virtual interface, as long as you specify the same channel. Note that two things are left unhandled (this is an improvement -- not a complete fix): * different HT/no-HT modes currently you could start an HT AP and then connect to a non-HT network on the same channel which would configure the hardware for no HT; that can be fixed fairly easily * CSA An AP we're connected to on a virtual interface might indicate switching channels, and in that case we would follow it, regardless of how many other interfaces are operating; this requires more effort to fix but is pretty rare after all Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-05-05 13:25:02 +00:00
struct ieee80211_local *local = wiphy_priv(wiphy);
struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
cfg80211/mac80211: better channel handling Currently (all tested with hwsim) you can do stupid things like setting up an AP on a certain channel, then adding another virtual interface and making that associate on another channel -- this will make the beaconing to move channel but obviously without the necessary IEs data update. In order to improve this situation, first make the configuration APIs (cfg80211 and nl80211) aware of multi-channel operation -- we'll eventually need that in the future anyway. There's one userland API change and one API addition. The API change is that now SET_WIPHY must be called with virtual interface index rather than only wiphy index in order to take effect for that interface -- luckily all current users (hostapd) do that. For monitor interfaces, the old setting is preserved, but monitors are always slaved to other devices anyway so no guarantees. The second userland API change is the introduction of a per virtual interface SET_CHANNEL command, that hostapd should use going forward to make it easier to understand what's going on (it can automatically detect a kernel with this command). Other than mac80211, no existing cfg80211 drivers are affected by this change because they only allow a single virtual interface. mac80211, however, now needs to be aware that the channel settings are per interface now, and needs to disallow (for now) real multi-channel operation, which is another important part of this patch. One of the immediate benefits is that you can now start hostapd to operate on a hardware that already has a connection on another virtual interface, as long as you specify the same channel. Note that two things are left unhandled (this is an improvement -- not a complete fix): * different HT/no-HT modes currently you could start an HT AP and then connect to a non-HT network on the same channel which would configure the hardware for no HT; that can be fixed fairly easily * CSA An AP we're connected to on a virtual interface might indicate switching channels, and in that case we would follow it, regardless of how many other interfaces are operating; this requires more effort to fix but is pretty rare after all Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-05-05 13:25:02 +00:00
switch (ieee80211_get_channel_mode(local, sdata)) {
case CHAN_MODE_HOPPING:
return -EBUSY;
case CHAN_MODE_FIXED:
if (!params->channel_fixed)
return -EBUSY;
if (local->oper_channel == params->channel)
break;
return -EBUSY;
case CHAN_MODE_UNDEFINED:
break;
}
return ieee80211_ibss_join(sdata, params);
}
static int ieee80211_leave_ibss(struct wiphy *wiphy, struct net_device *dev)
{
struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
return ieee80211_ibss_leave(sdata);
}
static int ieee80211_set_wiphy_params(struct wiphy *wiphy, u32 changed)
{
struct ieee80211_local *local = wiphy_priv(wiphy);
int err;
if (changed & WIPHY_PARAM_FRAG_THRESHOLD) {
err = drv_set_frag_threshold(local, wiphy->frag_threshold);
if (err)
return err;
}
if (changed & WIPHY_PARAM_COVERAGE_CLASS) {
err = drv_set_coverage_class(local, wiphy->coverage_class);
if (err)
return err;
}
if (changed & WIPHY_PARAM_RTS_THRESHOLD) {
err = drv_set_rts_threshold(local, wiphy->rts_threshold);
if (err)
return err;
}
if (changed & WIPHY_PARAM_RETRY_SHORT)
local->hw.conf.short_frame_max_tx_count = wiphy->retry_short;
if (changed & WIPHY_PARAM_RETRY_LONG)
local->hw.conf.long_frame_max_tx_count = wiphy->retry_long;
if (changed &
(WIPHY_PARAM_RETRY_SHORT | WIPHY_PARAM_RETRY_LONG))
ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_RETRY_LIMITS);
return 0;
}
static int ieee80211_set_tx_power(struct wiphy *wiphy,
enum nl80211_tx_power_setting type, int mbm)
{
struct ieee80211_local *local = wiphy_priv(wiphy);
struct ieee80211_channel *chan = local->hw.conf.channel;
u32 changes = 0;
switch (type) {
case NL80211_TX_POWER_AUTOMATIC:
local->user_power_level = -1;
break;
case NL80211_TX_POWER_LIMITED:
if (mbm < 0 || (mbm % 100))
return -EOPNOTSUPP;
local->user_power_level = MBM_TO_DBM(mbm);
break;
case NL80211_TX_POWER_FIXED:
if (mbm < 0 || (mbm % 100))
return -EOPNOTSUPP;
/* TODO: move to cfg80211 when it knows the channel */
if (MBM_TO_DBM(mbm) > chan->max_power)
return -EINVAL;
local->user_power_level = MBM_TO_DBM(mbm);
break;
}
ieee80211_hw_config(local, changes);
return 0;
}
static int ieee80211_get_tx_power(struct wiphy *wiphy, int *dbm)
{
struct ieee80211_local *local = wiphy_priv(wiphy);
*dbm = local->hw.conf.power_level;
return 0;
}
static int ieee80211_set_wds_peer(struct wiphy *wiphy, struct net_device *dev,
const u8 *addr)
{
struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
memcpy(&sdata->u.wds.remote_addr, addr, ETH_ALEN);
return 0;
}
static void ieee80211_rfkill_poll(struct wiphy *wiphy)
{
struct ieee80211_local *local = wiphy_priv(wiphy);
drv_rfkill_poll(local);
}
#ifdef CONFIG_NL80211_TESTMODE
static int ieee80211_testmode_cmd(struct wiphy *wiphy, void *data, int len)
{
struct ieee80211_local *local = wiphy_priv(wiphy);
if (!local->ops->testmode_cmd)
return -EOPNOTSUPP;
return local->ops->testmode_cmd(&local->hw, data, len);
}
#endif
int __ieee80211_request_smps(struct ieee80211_sub_if_data *sdata,
enum ieee80211_smps_mode smps_mode)
{
const u8 *ap;
enum ieee80211_smps_mode old_req;
int err;
old_req = sdata->u.mgd.req_smps;
sdata->u.mgd.req_smps = smps_mode;
if (old_req == smps_mode &&
smps_mode != IEEE80211_SMPS_AUTOMATIC)
return 0;
/*
* If not associated, or current association is not an HT
* association, there's no need to send an action frame.
*/
if (!sdata->u.mgd.associated ||
sdata->vif.bss_conf.channel_type == NL80211_CHAN_NO_HT) {
mutex_lock(&sdata->local->iflist_mtx);
ieee80211_recalc_smps(sdata->local);
mutex_unlock(&sdata->local->iflist_mtx);
return 0;
}
ap = sdata->u.mgd.associated->bssid;
if (smps_mode == IEEE80211_SMPS_AUTOMATIC) {
if (sdata->u.mgd.powersave)
smps_mode = IEEE80211_SMPS_DYNAMIC;
else
smps_mode = IEEE80211_SMPS_OFF;
}
/* send SM PS frame to AP */
err = ieee80211_send_smps_action(sdata, smps_mode,
ap, ap);
if (err)
sdata->u.mgd.req_smps = old_req;
return err;
}
static int ieee80211_set_power_mgmt(struct wiphy *wiphy, struct net_device *dev,
bool enabled, int timeout)
{
struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
if (sdata->vif.type != NL80211_IFTYPE_STATION)
return -EOPNOTSUPP;
if (!(local->hw.flags & IEEE80211_HW_SUPPORTS_PS))
return -EOPNOTSUPP;
if (enabled == sdata->u.mgd.powersave &&
timeout == local->dynamic_ps_forced_timeout)
return 0;
sdata->u.mgd.powersave = enabled;
local->dynamic_ps_forced_timeout = timeout;
/* no change, but if automatic follow powersave */
mutex_lock(&sdata->u.mgd.mtx);
__ieee80211_request_smps(sdata, sdata->u.mgd.req_smps);
mutex_unlock(&sdata->u.mgd.mtx);
if (local->hw.flags & IEEE80211_HW_SUPPORTS_DYNAMIC_PS)
ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_PS);
ieee80211_recalc_ps(local, -1);
return 0;
}
static int ieee80211_set_cqm_rssi_config(struct wiphy *wiphy,
struct net_device *dev,
s32 rssi_thold, u32 rssi_hyst)
{
struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
struct ieee80211_vif *vif = &sdata->vif;
struct ieee80211_bss_conf *bss_conf = &vif->bss_conf;
if (rssi_thold == bss_conf->cqm_rssi_thold &&
rssi_hyst == bss_conf->cqm_rssi_hyst)
return 0;
bss_conf->cqm_rssi_thold = rssi_thold;
bss_conf->cqm_rssi_hyst = rssi_hyst;
if (!(local->hw.flags & IEEE80211_HW_SUPPORTS_CQM_RSSI)) {
if (sdata->vif.type != NL80211_IFTYPE_STATION)
return -EOPNOTSUPP;
return 0;
}
/* tell the driver upon association, unless already associated */
if (sdata->u.mgd.associated)
ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_CQM);
return 0;
}
static int ieee80211_set_bitrate_mask(struct wiphy *wiphy,
struct net_device *dev,
const u8 *addr,
const struct cfg80211_bitrate_mask *mask)
{
struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
int i;
/*
* This _could_ be supported by providing a hook for
* drivers for this function, but at this point it
* doesn't seem worth bothering.
*/
if (local->hw.flags & IEEE80211_HW_HAS_RATE_CONTROL)
return -EOPNOTSUPP;
for (i = 0; i < IEEE80211_NUM_BANDS; i++)
sdata->rc_rateidx_mask[i] = mask->control[i].legacy;
return 0;
}
static int ieee80211_remain_on_channel(struct wiphy *wiphy,
struct net_device *dev,
struct ieee80211_channel *chan,
enum nl80211_channel_type channel_type,
unsigned int duration,
u64 *cookie)
{
struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
return ieee80211_wk_remain_on_channel(sdata, chan, channel_type,
duration, cookie);
}
static int ieee80211_cancel_remain_on_channel(struct wiphy *wiphy,
struct net_device *dev,
u64 cookie)
{
struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
return ieee80211_wk_cancel_remain_on_channel(sdata, cookie);
}
static int ieee80211_mgmt_tx(struct wiphy *wiphy, struct net_device *dev,
struct ieee80211_channel *chan,
enum nl80211_channel_type channel_type,
bool channel_type_valid,
const u8 *buf, size_t len, u64 *cookie)
{
struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
struct ieee80211_local *local = sdata->local;
struct sk_buff *skb;
struct sta_info *sta;
const struct ieee80211_mgmt *mgmt = (void *)buf;
u32 flags = IEEE80211_TX_INTFL_NL80211_FRAME_TX |
IEEE80211_TX_CTL_REQ_TX_STATUS;
/* Check that we are on the requested channel for transmission */
if (chan != local->tmp_channel &&
chan != local->oper_channel)
return -EBUSY;
if (channel_type_valid &&
(channel_type != local->tmp_channel_type &&
channel_type != local->_oper_channel_type))
return -EBUSY;
switch (sdata->vif.type) {
case NL80211_IFTYPE_ADHOC:
case NL80211_IFTYPE_AP:
case NL80211_IFTYPE_AP_VLAN:
case NL80211_IFTYPE_P2P_GO:
if (!ieee80211_is_action(mgmt->frame_control) ||
mgmt->u.action.category == WLAN_CATEGORY_PUBLIC)
break;
rcu_read_lock();
sta = sta_info_get(sdata, mgmt->da);
rcu_read_unlock();
if (!sta)
return -ENOLINK;
break;
case NL80211_IFTYPE_STATION:
case NL80211_IFTYPE_P2P_CLIENT:
break;
default:
return -EOPNOTSUPP;
}
skb = dev_alloc_skb(local->hw.extra_tx_headroom + len);
if (!skb)
return -ENOMEM;
skb_reserve(skb, local->hw.extra_tx_headroom);
memcpy(skb_put(skb, len), buf, len);
IEEE80211_SKB_CB(skb)->flags = flags;
skb->dev = sdata->dev;
ieee80211_tx_skb(sdata, skb);
*cookie = (unsigned long) skb;
return 0;
}
static void ieee80211_mgmt_frame_register(struct wiphy *wiphy,
struct net_device *dev,
u16 frame_type, bool reg)
{
struct ieee80211_local *local = wiphy_priv(wiphy);
if (frame_type != (IEEE80211_FTYPE_MGMT | IEEE80211_STYPE_PROBE_REQ))
return;
if (reg)
local->probe_req_reg++;
else
local->probe_req_reg--;
ieee80211_queue_work(&local->hw, &local->reconfig_filter);
}
static int ieee80211_set_antenna(struct wiphy *wiphy, u32 tx_ant, u32 rx_ant)
{
struct ieee80211_local *local = wiphy_priv(wiphy);
if (local->started)
return -EOPNOTSUPP;
return drv_set_antenna(local, tx_ant, rx_ant);
}
static int ieee80211_get_antenna(struct wiphy *wiphy, u32 *tx_ant, u32 *rx_ant)
{
struct ieee80211_local *local = wiphy_priv(wiphy);
return drv_get_antenna(local, tx_ant, rx_ant);
}
struct cfg80211_ops mac80211_config_ops = {
.add_virtual_intf = ieee80211_add_iface,
.del_virtual_intf = ieee80211_del_iface,
.change_virtual_intf = ieee80211_change_iface,
.add_key = ieee80211_add_key,
.del_key = ieee80211_del_key,
.get_key = ieee80211_get_key,
.set_default_key = ieee80211_config_default_key,
.set_default_mgmt_key = ieee80211_config_default_mgmt_key,
.add_beacon = ieee80211_add_beacon,
.set_beacon = ieee80211_set_beacon,
.del_beacon = ieee80211_del_beacon,
.add_station = ieee80211_add_station,
.del_station = ieee80211_del_station,
.change_station = ieee80211_change_station,
.get_station = ieee80211_get_station,
.dump_station = ieee80211_dump_station,
.dump_survey = ieee80211_dump_survey,
#ifdef CONFIG_MAC80211_MESH
.add_mpath = ieee80211_add_mpath,
.del_mpath = ieee80211_del_mpath,
.change_mpath = ieee80211_change_mpath,
.get_mpath = ieee80211_get_mpath,
.dump_mpath = ieee80211_dump_mpath,
.set_mesh_params = ieee80211_set_mesh_params,
.get_mesh_params = ieee80211_get_mesh_params,
#endif
.change_bss = ieee80211_change_bss,
.set_txq_params = ieee80211_set_txq_params,
.set_channel = ieee80211_set_channel,
.suspend = ieee80211_suspend,
.resume = ieee80211_resume,
.scan = ieee80211_scan,
nl80211: Add MLME primitives to support external SME This patch adds new nl80211 commands to allow user space to request authentication and association (and also deauthentication and disassociation). The commands are structured to allow separate authentication and association steps, i.e., the interface between kernel and user space is similar to the MLME SAP interface in IEEE 802.11 standard and an user space application takes the role of the SME. The patch introduces MLME-AUTHENTICATE.request, MLME-{,RE}ASSOCIATE.request, MLME-DEAUTHENTICATE.request, and MLME-DISASSOCIATE.request primitives. The authentication and association commands request the actual operations in two steps (assuming the driver supports this; if not, separate authentication step is skipped; this could end up being a separate "connect" command). The initial implementation for mac80211 uses the current net/mac80211/mlme.c for actual sending and processing of management frames and the new nl80211 commands will just stop the current state machine from moving automatically from authentication to association. Future cleanup may move more of the MLME operations into cfg80211. The goal of this design is to provide more control of authentication and association process to user space without having to move the full MLME implementation. This should be enough to allow IEEE 802.11r FT protocol and 802.11s SAE authentication to be implemented. Obviously, this will also bring the extra benefit of not having to use WEXT for association requests with mac80211. An example implementation of a user space SME using the new nl80211 commands is available for wpa_supplicant. This patch is enough to get IEEE 802.11r FT protocol working with over-the-air mechanism (over-the-DS will need additional MLME primitives for handling the FT Action frames). Signed-off-by: Jouni Malinen <j@w1.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-03-19 11:39:22 +00:00
.auth = ieee80211_auth,
.assoc = ieee80211_assoc,
.deauth = ieee80211_deauth,
.disassoc = ieee80211_disassoc,
.join_ibss = ieee80211_join_ibss,
.leave_ibss = ieee80211_leave_ibss,
.set_wiphy_params = ieee80211_set_wiphy_params,
.set_tx_power = ieee80211_set_tx_power,
.get_tx_power = ieee80211_get_tx_power,
.set_wds_peer = ieee80211_set_wds_peer,
.rfkill_poll = ieee80211_rfkill_poll,
CFG80211_TESTMODE_CMD(ieee80211_testmode_cmd)
.set_power_mgmt = ieee80211_set_power_mgmt,
.set_bitrate_mask = ieee80211_set_bitrate_mask,
.remain_on_channel = ieee80211_remain_on_channel,
.cancel_remain_on_channel = ieee80211_cancel_remain_on_channel,
.mgmt_tx = ieee80211_mgmt_tx,
.set_cqm_rssi_config = ieee80211_set_cqm_rssi_config,
.mgmt_frame_register = ieee80211_mgmt_frame_register,
.set_antenna = ieee80211_set_antenna,
.get_antenna = ieee80211_get_antenna,
};