linux/drivers/acpi/fan.c

497 lines
12 KiB
C
Raw Normal View History

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 157 Based on 3 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version [author] [kishon] [vijay] [abraham] [i] [kishon]@[ti] [com] this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version [author] [graeme] [gregory] [gg]@[slimlogic] [co] [uk] [author] [kishon] [vijay] [abraham] [i] [kishon]@[ti] [com] [based] [on] [twl6030]_[usb] [c] [author] [hema] [hk] [hemahk]@[ti] [com] this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 1105 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Richard Fontana <rfontana@redhat.com> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070033.202006027@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-27 06:55:06 +00:00
// SPDX-License-Identifier: GPL-2.0-or-later
/*
* acpi_fan.c - ACPI Fan Driver ($Revision: 29 $)
*
* Copyright (C) 2001, 2002 Andy Grover <andrew.grover@intel.com>
* Copyright (C) 2001, 2002 Paul Diefenbaugh <paul.s.diefenbaugh@intel.com>
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/types.h>
#include <linux/uaccess.h>
#include <linux/thermal.h>
ACPI: Clean up inclusions of ACPI header files Replace direct inclusions of <acpi/acpi.h>, <acpi/acpi_bus.h> and <acpi/acpi_drivers.h>, which are incorrect, with <linux/acpi.h> inclusions and remove some inclusions of those files that aren't necessary. First of all, <acpi/acpi.h>, <acpi/acpi_bus.h> and <acpi/acpi_drivers.h> should not be included directly from any files that are built for CONFIG_ACPI unset, because that generally leads to build warnings about undefined symbols in !CONFIG_ACPI builds. For CONFIG_ACPI set, <linux/acpi.h> includes those files and for CONFIG_ACPI unset it provides stub ACPI symbols to be used in that case. Second, there are ordering dependencies between those files that always have to be met. Namely, it is required that <acpi/acpi_bus.h> be included prior to <acpi/acpi_drivers.h> so that the acpi_pci_root declarations the latter depends on are always there. And <acpi/acpi.h> which provides basic ACPICA type declarations should always be included prior to any other ACPI headers in CONFIG_ACPI builds. That also is taken care of including <linux/acpi.h> as appropriate. Signed-off-by: Lv Zheng <lv.zheng@intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Matthew Garrett <mjg59@srcf.ucam.org> Cc: Tony Luck <tony.luck@intel.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> (drivers/pci stuff) Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> (Xen stuff) Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-12-03 00:49:16 +00:00
#include <linux/acpi.h>
#include <linux/platform_device.h>
#include <linux/sort.h>
#include "fan.h"
MODULE_AUTHOR("Paul Diefenbaugh");
MODULE_DESCRIPTION("ACPI Fan Driver");
MODULE_LICENSE("GPL");
static int acpi_fan_probe(struct platform_device *pdev);
static int acpi_fan_remove(struct platform_device *pdev);
static const struct acpi_device_id fan_device_ids[] = {
ACPI_FAN_DEVICE_IDS,
{"", 0},
};
MODULE_DEVICE_TABLE(acpi, fan_device_ids);
#ifdef CONFIG_PM_SLEEP
static int acpi_fan_suspend(struct device *dev);
static int acpi_fan_resume(struct device *dev);
static const struct dev_pm_ops acpi_fan_pm = {
.resume = acpi_fan_resume,
.freeze = acpi_fan_suspend,
.thaw = acpi_fan_resume,
.restore = acpi_fan_resume,
};
#define FAN_PM_OPS_PTR (&acpi_fan_pm)
#else
#define FAN_PM_OPS_PTR NULL
#endif
ACPI: fan: Expose fan performance state information When _FPS indicates variable speed fan support, the thermal cooling device for fan shows max performance state count as "max_state" (greater than or equal to 1). But the thermal cooling device doesn't expose the properties of each performance state. This is not enough for smart fan control user space software, which also considers speed, power and noise level. This change exposes the properties of the fan performance states in the sysfs directory of the ACPI device representing the fan, that is /sys/bus/acpi/devices/devices/INT3404:00 or /sys/bus/platform/devices/PNP0C0B:00. For example: $ ls /sys/bus/acpi/devices/INT3404\:00 description path state0 state11 state4 state7 status hid physical_node state1 state2 state5 state8 subsystem modalias power state10 state3 state6 state9 uevent uid wakeup where each state* attribute lists the properties of a fan performance state in the following format: control_percent:trip_point:speed_rpm:noise_level_mdb:power_mw $ cat /sys/bus/acpi/devices/INT3404\:00/state10 95:0:11600:47500:4500 as documented in Documentation/admin-guide/acpi/fan_performance_states.rst While at it, return the correct error code from acpi_fan_probe() when acpi_fan_get_fps() or acpi_fan_get_fif() fails. Suggested-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> [ rjw: Subject, changelog, documentation ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-12-13 23:48:40 +00:00
#define ACPI_FPS_NAME_LEN 20
struct acpi_fan_fps {
u64 control;
u64 trip_point;
u64 speed;
u64 noise_level;
u64 power;
ACPI: fan: Expose fan performance state information When _FPS indicates variable speed fan support, the thermal cooling device for fan shows max performance state count as "max_state" (greater than or equal to 1). But the thermal cooling device doesn't expose the properties of each performance state. This is not enough for smart fan control user space software, which also considers speed, power and noise level. This change exposes the properties of the fan performance states in the sysfs directory of the ACPI device representing the fan, that is /sys/bus/acpi/devices/devices/INT3404:00 or /sys/bus/platform/devices/PNP0C0B:00. For example: $ ls /sys/bus/acpi/devices/INT3404\:00 description path state0 state11 state4 state7 status hid physical_node state1 state2 state5 state8 subsystem modalias power state10 state3 state6 state9 uevent uid wakeup where each state* attribute lists the properties of a fan performance state in the following format: control_percent:trip_point:speed_rpm:noise_level_mdb:power_mw $ cat /sys/bus/acpi/devices/INT3404\:00/state10 95:0:11600:47500:4500 as documented in Documentation/admin-guide/acpi/fan_performance_states.rst While at it, return the correct error code from acpi_fan_probe() when acpi_fan_get_fps() or acpi_fan_get_fif() fails. Suggested-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> [ rjw: Subject, changelog, documentation ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-12-13 23:48:40 +00:00
char name[ACPI_FPS_NAME_LEN];
struct device_attribute dev_attr;
};
struct acpi_fan_fif {
u64 revision;
u64 fine_grain_ctrl;
u64 step_size;
u64 low_speed_notification;
};
struct acpi_fan {
bool acpi4;
struct acpi_fan_fif fif;
struct acpi_fan_fps *fps;
int fps_count;
struct thermal_cooling_device *cdev;
};
static struct platform_driver acpi_fan_driver = {
.probe = acpi_fan_probe,
.remove = acpi_fan_remove,
.driver = {
.name = "acpi-fan",
.acpi_match_table = fan_device_ids,
.pm = FAN_PM_OPS_PTR,
},
};
/* thermal cooling device callbacks */
static int fan_get_max_state(struct thermal_cooling_device *cdev, unsigned long
*state)
{
struct acpi_device *device = cdev->devdata;
struct acpi_fan *fan = acpi_driver_data(device);
if (fan->acpi4)
*state = fan->fps_count - 1;
else
*state = 1;
return 0;
}
static int fan_get_state_acpi4(struct acpi_device *device, unsigned long *state)
{
struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
struct acpi_fan *fan = acpi_driver_data(device);
union acpi_object *obj;
acpi_status status;
int control, i;
status = acpi_evaluate_object(device->handle, "_FST", NULL, &buffer);
if (ACPI_FAILURE(status)) {
dev_err(&device->dev, "Get fan state failed\n");
return status;
}
obj = buffer.pointer;
if (!obj || obj->type != ACPI_TYPE_PACKAGE ||
obj->package.count != 3 ||
obj->package.elements[1].type != ACPI_TYPE_INTEGER) {
dev_err(&device->dev, "Invalid _FST data\n");
status = -EINVAL;
goto err;
}
control = obj->package.elements[1].integer.value;
for (i = 0; i < fan->fps_count; i++) {
/*
* When Fine Grain Control is set, return the state
* corresponding to maximum fan->fps[i].control
* value compared to the current speed. Here the
* fan->fps[] is sorted array with increasing speed.
*/
if (fan->fif.fine_grain_ctrl && control < fan->fps[i].control) {
i = (i > 0) ? i - 1 : 0;
break;
} else if (control == fan->fps[i].control) {
break;
}
}
if (i == fan->fps_count) {
dev_dbg(&device->dev, "Invalid control value returned\n");
status = -EINVAL;
goto err;
}
*state = i;
err:
kfree(obj);
return status;
}
static int fan_get_state(struct acpi_device *device, unsigned long *state)
{
int result;
int acpi_state = ACPI_STATE_D0;
result = acpi_device_update_power(device, &acpi_state);
if (result)
return result;
ACPI / PM: Rework device power management to follow ACPI 6 The ACPI 6 specification has made some changes in the device power management area. In particular: * The D3hot power state is now supposed to be always available (instead of D3cold) and D3cold is only regarded as valid if the _PR3 object is present for the given device. * The required ordering of transitions into power states deeper than D0 is now such that for a transition into state Dx the _PSx method is supposed to be executed first, if present, and the states of the power resources the device depends on are supposed to be changed after that. * It is now explicitly forbidden to transition devices from lower-power (deeper) into higher-power (shallower) power states other than D0. Those changes have been made so the specification reflects the Windows' device power management code that the vast majority of systems using ACPI is validated against. To avoid artificial differences in ACPI device power management between Windows and Linux, modify the ACPI device power management code to follow the new specification. Add comments explaining the code flow in some unclear places. This only may affect some real corner cases in which the OS behavior expected by the firmware is different from the Windows one, but that's quite unlikely. The transition ordering change affects transitions to D1 and D2 which are rarely used (if at all) and into D3hot and D3cold for devices actually having _PR3, but those are likely to be validated against Windows anyway. The other changes may affect code calling acpi_device_get_power() or acpi_device_update_power() where ACPI_STATE_D3_HOT may be returned instead of ACPI_STATE_D3_COLD (that's why the ACPI fan driver needs to be updated too) and since transitions into ACPI_STATE_D3_HOT may remove power now, it is better to avoid this one in acpi_pm_device_sleep_state() if the "no power off" PM QoS flag is set. The only existing user of acpi_device_can_poweroff() really cares about the case when _PR3 is present, so the change in that function should not cause any problems to happen too. A plus is that PCI_D3hot can be mapped to ACPI_STATE_D3_HOT now and the compatibility with older systems should be covered automatically. In any case, if any real problems result from this, it still will be better to follow the Windows' behavior (which now is reflected by the specification too) in general and handle the cases when it doesn't work via quirks. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-05-15 23:55:35 +00:00
*state = acpi_state == ACPI_STATE_D3_COLD
|| acpi_state == ACPI_STATE_D3_HOT ?
0 : (acpi_state == ACPI_STATE_D0 ? 1 : -1);
return 0;
}
static int fan_get_cur_state(struct thermal_cooling_device *cdev, unsigned long
*state)
{
struct acpi_device *device = cdev->devdata;
struct acpi_fan *fan = acpi_driver_data(device);
if (fan->acpi4)
return fan_get_state_acpi4(device, state);
else
return fan_get_state(device, state);
}
static int fan_set_state(struct acpi_device *device, unsigned long state)
{
if (state != 0 && state != 1)
return -EINVAL;
return acpi_device_set_power(device,
state ? ACPI_STATE_D0 : ACPI_STATE_D3_COLD);
}
static int fan_set_state_acpi4(struct acpi_device *device, unsigned long state)
{
struct acpi_fan *fan = acpi_driver_data(device);
acpi_status status;
if (state >= fan->fps_count)
return -EINVAL;
status = acpi_execute_simple_method(device->handle, "_FSL",
fan->fps[state].control);
if (ACPI_FAILURE(status)) {
dev_dbg(&device->dev, "Failed to set state by _FSL\n");
return status;
}
return 0;
}
static int
fan_set_cur_state(struct thermal_cooling_device *cdev, unsigned long state)
{
struct acpi_device *device = cdev->devdata;
struct acpi_fan *fan = acpi_driver_data(device);
if (fan->acpi4)
return fan_set_state_acpi4(device, state);
else
return fan_set_state(device, state);
}
static const struct thermal_cooling_device_ops fan_cooling_ops = {
.get_max_state = fan_get_max_state,
.get_cur_state = fan_get_cur_state,
.set_cur_state = fan_set_cur_state,
};
/* --------------------------------------------------------------------------
* Driver Interface
* --------------------------------------------------------------------------
*/
static bool acpi_fan_is_acpi4(struct acpi_device *device)
{
return acpi_has_method(device->handle, "_FIF") &&
acpi_has_method(device->handle, "_FPS") &&
acpi_has_method(device->handle, "_FSL") &&
acpi_has_method(device->handle, "_FST");
}
static int acpi_fan_get_fif(struct acpi_device *device)
{
struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
struct acpi_fan *fan = acpi_driver_data(device);
struct acpi_buffer format = { sizeof("NNNN"), "NNNN" };
struct acpi_buffer fif = { sizeof(fan->fif), &fan->fif };
union acpi_object *obj;
acpi_status status;
status = acpi_evaluate_object(device->handle, "_FIF", NULL, &buffer);
if (ACPI_FAILURE(status))
return status;
obj = buffer.pointer;
if (!obj || obj->type != ACPI_TYPE_PACKAGE) {
dev_err(&device->dev, "Invalid _FIF data\n");
status = -EINVAL;
goto err;
}
status = acpi_extract_package(obj, &format, &fif);
if (ACPI_FAILURE(status)) {
dev_err(&device->dev, "Invalid _FIF element\n");
status = -EINVAL;
}
err:
kfree(obj);
return status;
}
static int acpi_fan_speed_cmp(const void *a, const void *b)
{
const struct acpi_fan_fps *fps1 = a;
const struct acpi_fan_fps *fps2 = b;
return fps1->speed - fps2->speed;
}
ACPI: fan: Expose fan performance state information When _FPS indicates variable speed fan support, the thermal cooling device for fan shows max performance state count as "max_state" (greater than or equal to 1). But the thermal cooling device doesn't expose the properties of each performance state. This is not enough for smart fan control user space software, which also considers speed, power and noise level. This change exposes the properties of the fan performance states in the sysfs directory of the ACPI device representing the fan, that is /sys/bus/acpi/devices/devices/INT3404:00 or /sys/bus/platform/devices/PNP0C0B:00. For example: $ ls /sys/bus/acpi/devices/INT3404\:00 description path state0 state11 state4 state7 status hid physical_node state1 state2 state5 state8 subsystem modalias power state10 state3 state6 state9 uevent uid wakeup where each state* attribute lists the properties of a fan performance state in the following format: control_percent:trip_point:speed_rpm:noise_level_mdb:power_mw $ cat /sys/bus/acpi/devices/INT3404\:00/state10 95:0:11600:47500:4500 as documented in Documentation/admin-guide/acpi/fan_performance_states.rst While at it, return the correct error code from acpi_fan_probe() when acpi_fan_get_fps() or acpi_fan_get_fif() fails. Suggested-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> [ rjw: Subject, changelog, documentation ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-12-13 23:48:40 +00:00
static ssize_t show_state(struct device *dev, struct device_attribute *attr, char *buf)
{
struct acpi_fan_fps *fps = container_of(attr, struct acpi_fan_fps, dev_attr);
int count;
if (fps->control == 0xFFFFFFFF || fps->control > 100)
count = scnprintf(buf, PAGE_SIZE, "not-defined:");
ACPI: fan: Expose fan performance state information When _FPS indicates variable speed fan support, the thermal cooling device for fan shows max performance state count as "max_state" (greater than or equal to 1). But the thermal cooling device doesn't expose the properties of each performance state. This is not enough for smart fan control user space software, which also considers speed, power and noise level. This change exposes the properties of the fan performance states in the sysfs directory of the ACPI device representing the fan, that is /sys/bus/acpi/devices/devices/INT3404:00 or /sys/bus/platform/devices/PNP0C0B:00. For example: $ ls /sys/bus/acpi/devices/INT3404\:00 description path state0 state11 state4 state7 status hid physical_node state1 state2 state5 state8 subsystem modalias power state10 state3 state6 state9 uevent uid wakeup where each state* attribute lists the properties of a fan performance state in the following format: control_percent:trip_point:speed_rpm:noise_level_mdb:power_mw $ cat /sys/bus/acpi/devices/INT3404\:00/state10 95:0:11600:47500:4500 as documented in Documentation/admin-guide/acpi/fan_performance_states.rst While at it, return the correct error code from acpi_fan_probe() when acpi_fan_get_fps() or acpi_fan_get_fif() fails. Suggested-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> [ rjw: Subject, changelog, documentation ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-12-13 23:48:40 +00:00
else
count = scnprintf(buf, PAGE_SIZE, "%lld:", fps->control);
ACPI: fan: Expose fan performance state information When _FPS indicates variable speed fan support, the thermal cooling device for fan shows max performance state count as "max_state" (greater than or equal to 1). But the thermal cooling device doesn't expose the properties of each performance state. This is not enough for smart fan control user space software, which also considers speed, power and noise level. This change exposes the properties of the fan performance states in the sysfs directory of the ACPI device representing the fan, that is /sys/bus/acpi/devices/devices/INT3404:00 or /sys/bus/platform/devices/PNP0C0B:00. For example: $ ls /sys/bus/acpi/devices/INT3404\:00 description path state0 state11 state4 state7 status hid physical_node state1 state2 state5 state8 subsystem modalias power state10 state3 state6 state9 uevent uid wakeup where each state* attribute lists the properties of a fan performance state in the following format: control_percent:trip_point:speed_rpm:noise_level_mdb:power_mw $ cat /sys/bus/acpi/devices/INT3404\:00/state10 95:0:11600:47500:4500 as documented in Documentation/admin-guide/acpi/fan_performance_states.rst While at it, return the correct error code from acpi_fan_probe() when acpi_fan_get_fps() or acpi_fan_get_fif() fails. Suggested-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> [ rjw: Subject, changelog, documentation ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-12-13 23:48:40 +00:00
if (fps->trip_point == 0xFFFFFFFF || fps->trip_point > 9)
count += scnprintf(&buf[count], PAGE_SIZE - count, "not-defined:");
ACPI: fan: Expose fan performance state information When _FPS indicates variable speed fan support, the thermal cooling device for fan shows max performance state count as "max_state" (greater than or equal to 1). But the thermal cooling device doesn't expose the properties of each performance state. This is not enough for smart fan control user space software, which also considers speed, power and noise level. This change exposes the properties of the fan performance states in the sysfs directory of the ACPI device representing the fan, that is /sys/bus/acpi/devices/devices/INT3404:00 or /sys/bus/platform/devices/PNP0C0B:00. For example: $ ls /sys/bus/acpi/devices/INT3404\:00 description path state0 state11 state4 state7 status hid physical_node state1 state2 state5 state8 subsystem modalias power state10 state3 state6 state9 uevent uid wakeup where each state* attribute lists the properties of a fan performance state in the following format: control_percent:trip_point:speed_rpm:noise_level_mdb:power_mw $ cat /sys/bus/acpi/devices/INT3404\:00/state10 95:0:11600:47500:4500 as documented in Documentation/admin-guide/acpi/fan_performance_states.rst While at it, return the correct error code from acpi_fan_probe() when acpi_fan_get_fps() or acpi_fan_get_fif() fails. Suggested-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> [ rjw: Subject, changelog, documentation ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-12-13 23:48:40 +00:00
else
count += scnprintf(&buf[count], PAGE_SIZE - count, "%lld:", fps->trip_point);
ACPI: fan: Expose fan performance state information When _FPS indicates variable speed fan support, the thermal cooling device for fan shows max performance state count as "max_state" (greater than or equal to 1). But the thermal cooling device doesn't expose the properties of each performance state. This is not enough for smart fan control user space software, which also considers speed, power and noise level. This change exposes the properties of the fan performance states in the sysfs directory of the ACPI device representing the fan, that is /sys/bus/acpi/devices/devices/INT3404:00 or /sys/bus/platform/devices/PNP0C0B:00. For example: $ ls /sys/bus/acpi/devices/INT3404\:00 description path state0 state11 state4 state7 status hid physical_node state1 state2 state5 state8 subsystem modalias power state10 state3 state6 state9 uevent uid wakeup where each state* attribute lists the properties of a fan performance state in the following format: control_percent:trip_point:speed_rpm:noise_level_mdb:power_mw $ cat /sys/bus/acpi/devices/INT3404\:00/state10 95:0:11600:47500:4500 as documented in Documentation/admin-guide/acpi/fan_performance_states.rst While at it, return the correct error code from acpi_fan_probe() when acpi_fan_get_fps() or acpi_fan_get_fif() fails. Suggested-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> [ rjw: Subject, changelog, documentation ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-12-13 23:48:40 +00:00
if (fps->speed == 0xFFFFFFFF)
count += scnprintf(&buf[count], PAGE_SIZE - count, "not-defined:");
ACPI: fan: Expose fan performance state information When _FPS indicates variable speed fan support, the thermal cooling device for fan shows max performance state count as "max_state" (greater than or equal to 1). But the thermal cooling device doesn't expose the properties of each performance state. This is not enough for smart fan control user space software, which also considers speed, power and noise level. This change exposes the properties of the fan performance states in the sysfs directory of the ACPI device representing the fan, that is /sys/bus/acpi/devices/devices/INT3404:00 or /sys/bus/platform/devices/PNP0C0B:00. For example: $ ls /sys/bus/acpi/devices/INT3404\:00 description path state0 state11 state4 state7 status hid physical_node state1 state2 state5 state8 subsystem modalias power state10 state3 state6 state9 uevent uid wakeup where each state* attribute lists the properties of a fan performance state in the following format: control_percent:trip_point:speed_rpm:noise_level_mdb:power_mw $ cat /sys/bus/acpi/devices/INT3404\:00/state10 95:0:11600:47500:4500 as documented in Documentation/admin-guide/acpi/fan_performance_states.rst While at it, return the correct error code from acpi_fan_probe() when acpi_fan_get_fps() or acpi_fan_get_fif() fails. Suggested-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> [ rjw: Subject, changelog, documentation ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-12-13 23:48:40 +00:00
else
count += scnprintf(&buf[count], PAGE_SIZE - count, "%lld:", fps->speed);
ACPI: fan: Expose fan performance state information When _FPS indicates variable speed fan support, the thermal cooling device for fan shows max performance state count as "max_state" (greater than or equal to 1). But the thermal cooling device doesn't expose the properties of each performance state. This is not enough for smart fan control user space software, which also considers speed, power and noise level. This change exposes the properties of the fan performance states in the sysfs directory of the ACPI device representing the fan, that is /sys/bus/acpi/devices/devices/INT3404:00 or /sys/bus/platform/devices/PNP0C0B:00. For example: $ ls /sys/bus/acpi/devices/INT3404\:00 description path state0 state11 state4 state7 status hid physical_node state1 state2 state5 state8 subsystem modalias power state10 state3 state6 state9 uevent uid wakeup where each state* attribute lists the properties of a fan performance state in the following format: control_percent:trip_point:speed_rpm:noise_level_mdb:power_mw $ cat /sys/bus/acpi/devices/INT3404\:00/state10 95:0:11600:47500:4500 as documented in Documentation/admin-guide/acpi/fan_performance_states.rst While at it, return the correct error code from acpi_fan_probe() when acpi_fan_get_fps() or acpi_fan_get_fif() fails. Suggested-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> [ rjw: Subject, changelog, documentation ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-12-13 23:48:40 +00:00
if (fps->noise_level == 0xFFFFFFFF)
count += scnprintf(&buf[count], PAGE_SIZE - count, "not-defined:");
ACPI: fan: Expose fan performance state information When _FPS indicates variable speed fan support, the thermal cooling device for fan shows max performance state count as "max_state" (greater than or equal to 1). But the thermal cooling device doesn't expose the properties of each performance state. This is not enough for smart fan control user space software, which also considers speed, power and noise level. This change exposes the properties of the fan performance states in the sysfs directory of the ACPI device representing the fan, that is /sys/bus/acpi/devices/devices/INT3404:00 or /sys/bus/platform/devices/PNP0C0B:00. For example: $ ls /sys/bus/acpi/devices/INT3404\:00 description path state0 state11 state4 state7 status hid physical_node state1 state2 state5 state8 subsystem modalias power state10 state3 state6 state9 uevent uid wakeup where each state* attribute lists the properties of a fan performance state in the following format: control_percent:trip_point:speed_rpm:noise_level_mdb:power_mw $ cat /sys/bus/acpi/devices/INT3404\:00/state10 95:0:11600:47500:4500 as documented in Documentation/admin-guide/acpi/fan_performance_states.rst While at it, return the correct error code from acpi_fan_probe() when acpi_fan_get_fps() or acpi_fan_get_fif() fails. Suggested-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> [ rjw: Subject, changelog, documentation ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-12-13 23:48:40 +00:00
else
count += scnprintf(&buf[count], PAGE_SIZE - count, "%lld:", fps->noise_level * 100);
ACPI: fan: Expose fan performance state information When _FPS indicates variable speed fan support, the thermal cooling device for fan shows max performance state count as "max_state" (greater than or equal to 1). But the thermal cooling device doesn't expose the properties of each performance state. This is not enough for smart fan control user space software, which also considers speed, power and noise level. This change exposes the properties of the fan performance states in the sysfs directory of the ACPI device representing the fan, that is /sys/bus/acpi/devices/devices/INT3404:00 or /sys/bus/platform/devices/PNP0C0B:00. For example: $ ls /sys/bus/acpi/devices/INT3404\:00 description path state0 state11 state4 state7 status hid physical_node state1 state2 state5 state8 subsystem modalias power state10 state3 state6 state9 uevent uid wakeup where each state* attribute lists the properties of a fan performance state in the following format: control_percent:trip_point:speed_rpm:noise_level_mdb:power_mw $ cat /sys/bus/acpi/devices/INT3404\:00/state10 95:0:11600:47500:4500 as documented in Documentation/admin-guide/acpi/fan_performance_states.rst While at it, return the correct error code from acpi_fan_probe() when acpi_fan_get_fps() or acpi_fan_get_fif() fails. Suggested-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> [ rjw: Subject, changelog, documentation ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-12-13 23:48:40 +00:00
if (fps->power == 0xFFFFFFFF)
count += scnprintf(&buf[count], PAGE_SIZE - count, "not-defined\n");
ACPI: fan: Expose fan performance state information When _FPS indicates variable speed fan support, the thermal cooling device for fan shows max performance state count as "max_state" (greater than or equal to 1). But the thermal cooling device doesn't expose the properties of each performance state. This is not enough for smart fan control user space software, which also considers speed, power and noise level. This change exposes the properties of the fan performance states in the sysfs directory of the ACPI device representing the fan, that is /sys/bus/acpi/devices/devices/INT3404:00 or /sys/bus/platform/devices/PNP0C0B:00. For example: $ ls /sys/bus/acpi/devices/INT3404\:00 description path state0 state11 state4 state7 status hid physical_node state1 state2 state5 state8 subsystem modalias power state10 state3 state6 state9 uevent uid wakeup where each state* attribute lists the properties of a fan performance state in the following format: control_percent:trip_point:speed_rpm:noise_level_mdb:power_mw $ cat /sys/bus/acpi/devices/INT3404\:00/state10 95:0:11600:47500:4500 as documented in Documentation/admin-guide/acpi/fan_performance_states.rst While at it, return the correct error code from acpi_fan_probe() when acpi_fan_get_fps() or acpi_fan_get_fif() fails. Suggested-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> [ rjw: Subject, changelog, documentation ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-12-13 23:48:40 +00:00
else
count += scnprintf(&buf[count], PAGE_SIZE - count, "%lld\n", fps->power);
ACPI: fan: Expose fan performance state information When _FPS indicates variable speed fan support, the thermal cooling device for fan shows max performance state count as "max_state" (greater than or equal to 1). But the thermal cooling device doesn't expose the properties of each performance state. This is not enough for smart fan control user space software, which also considers speed, power and noise level. This change exposes the properties of the fan performance states in the sysfs directory of the ACPI device representing the fan, that is /sys/bus/acpi/devices/devices/INT3404:00 or /sys/bus/platform/devices/PNP0C0B:00. For example: $ ls /sys/bus/acpi/devices/INT3404\:00 description path state0 state11 state4 state7 status hid physical_node state1 state2 state5 state8 subsystem modalias power state10 state3 state6 state9 uevent uid wakeup where each state* attribute lists the properties of a fan performance state in the following format: control_percent:trip_point:speed_rpm:noise_level_mdb:power_mw $ cat /sys/bus/acpi/devices/INT3404\:00/state10 95:0:11600:47500:4500 as documented in Documentation/admin-guide/acpi/fan_performance_states.rst While at it, return the correct error code from acpi_fan_probe() when acpi_fan_get_fps() or acpi_fan_get_fif() fails. Suggested-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> [ rjw: Subject, changelog, documentation ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-12-13 23:48:40 +00:00
return count;
}
static int acpi_fan_get_fps(struct acpi_device *device)
{
struct acpi_fan *fan = acpi_driver_data(device);
struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
union acpi_object *obj;
acpi_status status;
int i;
status = acpi_evaluate_object(device->handle, "_FPS", NULL, &buffer);
if (ACPI_FAILURE(status))
return status;
obj = buffer.pointer;
if (!obj || obj->type != ACPI_TYPE_PACKAGE || obj->package.count < 2) {
dev_err(&device->dev, "Invalid _FPS data\n");
status = -EINVAL;
goto err;
}
fan->fps_count = obj->package.count - 1; /* minus revision field */
treewide: devm_kzalloc() -> devm_kcalloc() The devm_kzalloc() function has a 2-factor argument form, devm_kcalloc(). This patch replaces cases of: devm_kzalloc(handle, a * b, gfp) with: devm_kcalloc(handle, a * b, gfp) as well as handling cases of: devm_kzalloc(handle, a * b * c, gfp) with: devm_kzalloc(handle, array3_size(a, b, c), gfp) as it's slightly less ugly than: devm_kcalloc(handle, array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: devm_kzalloc(handle, 4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. Some manual whitespace fixes were needed in this patch, as Coccinelle really liked to write "=devm_kcalloc..." instead of "= devm_kcalloc...". The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ expression HANDLE; type TYPE; expression THING, E; @@ ( devm_kzalloc(HANDLE, - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | devm_kzalloc(HANDLE, - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression HANDLE; expression COUNT; typedef u8; typedef __u8; @@ ( devm_kzalloc(HANDLE, - sizeof(u8) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(__u8) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(char) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(unsigned char) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(u8) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(__u8) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(char) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ expression HANDLE; type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ expression HANDLE; identifier SIZE, COUNT; @@ - devm_kzalloc + devm_kcalloc (HANDLE, - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression HANDLE; expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( devm_kzalloc(HANDLE, - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression HANDLE; expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ expression HANDLE; identifier STRIDE, SIZE, COUNT; @@ ( devm_kzalloc(HANDLE, - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression HANDLE; expression E1, E2, E3; constant C1, C2, C3; @@ ( devm_kzalloc(HANDLE, C1 * C2 * C3, ...) | devm_kzalloc(HANDLE, - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression HANDLE; expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( devm_kzalloc(HANDLE, sizeof(THING) * C2, ...) | devm_kzalloc(HANDLE, sizeof(TYPE) * C2, ...) | devm_kzalloc(HANDLE, C1 * C2 * C3, ...) | devm_kzalloc(HANDLE, C1 * C2, ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - (E1) * E2 + E1, E2 , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - (E1) * (E2) + E1, E2 , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-12 21:07:58 +00:00
fan->fps = devm_kcalloc(&device->dev,
fan->fps_count, sizeof(struct acpi_fan_fps),
GFP_KERNEL);
if (!fan->fps) {
dev_err(&device->dev, "Not enough memory\n");
status = -ENOMEM;
goto err;
}
for (i = 0; i < fan->fps_count; i++) {
struct acpi_buffer format = { sizeof("NNNNN"), "NNNNN" };
ACPI: fan: Expose fan performance state information When _FPS indicates variable speed fan support, the thermal cooling device for fan shows max performance state count as "max_state" (greater than or equal to 1). But the thermal cooling device doesn't expose the properties of each performance state. This is not enough for smart fan control user space software, which also considers speed, power and noise level. This change exposes the properties of the fan performance states in the sysfs directory of the ACPI device representing the fan, that is /sys/bus/acpi/devices/devices/INT3404:00 or /sys/bus/platform/devices/PNP0C0B:00. For example: $ ls /sys/bus/acpi/devices/INT3404\:00 description path state0 state11 state4 state7 status hid physical_node state1 state2 state5 state8 subsystem modalias power state10 state3 state6 state9 uevent uid wakeup where each state* attribute lists the properties of a fan performance state in the following format: control_percent:trip_point:speed_rpm:noise_level_mdb:power_mw $ cat /sys/bus/acpi/devices/INT3404\:00/state10 95:0:11600:47500:4500 as documented in Documentation/admin-guide/acpi/fan_performance_states.rst While at it, return the correct error code from acpi_fan_probe() when acpi_fan_get_fps() or acpi_fan_get_fif() fails. Suggested-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> [ rjw: Subject, changelog, documentation ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-12-13 23:48:40 +00:00
struct acpi_buffer fps = { offsetof(struct acpi_fan_fps, name),
&fan->fps[i] };
status = acpi_extract_package(&obj->package.elements[i + 1],
&format, &fps);
if (ACPI_FAILURE(status)) {
dev_err(&device->dev, "Invalid _FPS element\n");
ACPI: fan: Expose fan performance state information When _FPS indicates variable speed fan support, the thermal cooling device for fan shows max performance state count as "max_state" (greater than or equal to 1). But the thermal cooling device doesn't expose the properties of each performance state. This is not enough for smart fan control user space software, which also considers speed, power and noise level. This change exposes the properties of the fan performance states in the sysfs directory of the ACPI device representing the fan, that is /sys/bus/acpi/devices/devices/INT3404:00 or /sys/bus/platform/devices/PNP0C0B:00. For example: $ ls /sys/bus/acpi/devices/INT3404\:00 description path state0 state11 state4 state7 status hid physical_node state1 state2 state5 state8 subsystem modalias power state10 state3 state6 state9 uevent uid wakeup where each state* attribute lists the properties of a fan performance state in the following format: control_percent:trip_point:speed_rpm:noise_level_mdb:power_mw $ cat /sys/bus/acpi/devices/INT3404\:00/state10 95:0:11600:47500:4500 as documented in Documentation/admin-guide/acpi/fan_performance_states.rst While at it, return the correct error code from acpi_fan_probe() when acpi_fan_get_fps() or acpi_fan_get_fif() fails. Suggested-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> [ rjw: Subject, changelog, documentation ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-12-13 23:48:40 +00:00
goto err;
}
}
/* sort the state array according to fan speed in increase order */
sort(fan->fps, fan->fps_count, sizeof(*fan->fps),
acpi_fan_speed_cmp, NULL);
ACPI: fan: Expose fan performance state information When _FPS indicates variable speed fan support, the thermal cooling device for fan shows max performance state count as "max_state" (greater than or equal to 1). But the thermal cooling device doesn't expose the properties of each performance state. This is not enough for smart fan control user space software, which also considers speed, power and noise level. This change exposes the properties of the fan performance states in the sysfs directory of the ACPI device representing the fan, that is /sys/bus/acpi/devices/devices/INT3404:00 or /sys/bus/platform/devices/PNP0C0B:00. For example: $ ls /sys/bus/acpi/devices/INT3404\:00 description path state0 state11 state4 state7 status hid physical_node state1 state2 state5 state8 subsystem modalias power state10 state3 state6 state9 uevent uid wakeup where each state* attribute lists the properties of a fan performance state in the following format: control_percent:trip_point:speed_rpm:noise_level_mdb:power_mw $ cat /sys/bus/acpi/devices/INT3404\:00/state10 95:0:11600:47500:4500 as documented in Documentation/admin-guide/acpi/fan_performance_states.rst While at it, return the correct error code from acpi_fan_probe() when acpi_fan_get_fps() or acpi_fan_get_fif() fails. Suggested-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> [ rjw: Subject, changelog, documentation ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-12-13 23:48:40 +00:00
for (i = 0; i < fan->fps_count; ++i) {
struct acpi_fan_fps *fps = &fan->fps[i];
snprintf(fps->name, ACPI_FPS_NAME_LEN, "state%d", i);
sysfs_attr_init(&fps->dev_attr.attr);
ACPI: fan: Expose fan performance state information When _FPS indicates variable speed fan support, the thermal cooling device for fan shows max performance state count as "max_state" (greater than or equal to 1). But the thermal cooling device doesn't expose the properties of each performance state. This is not enough for smart fan control user space software, which also considers speed, power and noise level. This change exposes the properties of the fan performance states in the sysfs directory of the ACPI device representing the fan, that is /sys/bus/acpi/devices/devices/INT3404:00 or /sys/bus/platform/devices/PNP0C0B:00. For example: $ ls /sys/bus/acpi/devices/INT3404\:00 description path state0 state11 state4 state7 status hid physical_node state1 state2 state5 state8 subsystem modalias power state10 state3 state6 state9 uevent uid wakeup where each state* attribute lists the properties of a fan performance state in the following format: control_percent:trip_point:speed_rpm:noise_level_mdb:power_mw $ cat /sys/bus/acpi/devices/INT3404\:00/state10 95:0:11600:47500:4500 as documented in Documentation/admin-guide/acpi/fan_performance_states.rst While at it, return the correct error code from acpi_fan_probe() when acpi_fan_get_fps() or acpi_fan_get_fif() fails. Suggested-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> [ rjw: Subject, changelog, documentation ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-12-13 23:48:40 +00:00
fps->dev_attr.show = show_state;
fps->dev_attr.store = NULL;
fps->dev_attr.attr.name = fps->name;
fps->dev_attr.attr.mode = 0444;
status = sysfs_create_file(&device->dev.kobj, &fps->dev_attr.attr);
if (status) {
int j;
for (j = 0; j < i; ++j)
sysfs_remove_file(&device->dev.kobj, &fan->fps[j].dev_attr.attr);
break;
}
}
err:
kfree(obj);
return status;
}
static int acpi_fan_probe(struct platform_device *pdev)
{
int result = 0;
struct thermal_cooling_device *cdev;
struct acpi_fan *fan;
struct acpi_device *device = ACPI_COMPANION(&pdev->dev);
char *name;
fan = devm_kzalloc(&pdev->dev, sizeof(*fan), GFP_KERNEL);
if (!fan) {
dev_err(&device->dev, "No memory for fan\n");
return -ENOMEM;
}
device->driver_data = fan;
platform_set_drvdata(pdev, fan);
if (acpi_fan_is_acpi4(device)) {
ACPI: fan: Expose fan performance state information When _FPS indicates variable speed fan support, the thermal cooling device for fan shows max performance state count as "max_state" (greater than or equal to 1). But the thermal cooling device doesn't expose the properties of each performance state. This is not enough for smart fan control user space software, which also considers speed, power and noise level. This change exposes the properties of the fan performance states in the sysfs directory of the ACPI device representing the fan, that is /sys/bus/acpi/devices/devices/INT3404:00 or /sys/bus/platform/devices/PNP0C0B:00. For example: $ ls /sys/bus/acpi/devices/INT3404\:00 description path state0 state11 state4 state7 status hid physical_node state1 state2 state5 state8 subsystem modalias power state10 state3 state6 state9 uevent uid wakeup where each state* attribute lists the properties of a fan performance state in the following format: control_percent:trip_point:speed_rpm:noise_level_mdb:power_mw $ cat /sys/bus/acpi/devices/INT3404\:00/state10 95:0:11600:47500:4500 as documented in Documentation/admin-guide/acpi/fan_performance_states.rst While at it, return the correct error code from acpi_fan_probe() when acpi_fan_get_fps() or acpi_fan_get_fif() fails. Suggested-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> [ rjw: Subject, changelog, documentation ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-12-13 23:48:40 +00:00
result = acpi_fan_get_fif(device);
if (result)
return result;
result = acpi_fan_get_fps(device);
if (result)
return result;
fan->acpi4 = true;
} else {
result = acpi_device_update_power(device, NULL);
if (result) {
dev_err(&device->dev, "Failed to set initial power state\n");
ACPI: fan: Expose fan performance state information When _FPS indicates variable speed fan support, the thermal cooling device for fan shows max performance state count as "max_state" (greater than or equal to 1). But the thermal cooling device doesn't expose the properties of each performance state. This is not enough for smart fan control user space software, which also considers speed, power and noise level. This change exposes the properties of the fan performance states in the sysfs directory of the ACPI device representing the fan, that is /sys/bus/acpi/devices/devices/INT3404:00 or /sys/bus/platform/devices/PNP0C0B:00. For example: $ ls /sys/bus/acpi/devices/INT3404\:00 description path state0 state11 state4 state7 status hid physical_node state1 state2 state5 state8 subsystem modalias power state10 state3 state6 state9 uevent uid wakeup where each state* attribute lists the properties of a fan performance state in the following format: control_percent:trip_point:speed_rpm:noise_level_mdb:power_mw $ cat /sys/bus/acpi/devices/INT3404\:00/state10 95:0:11600:47500:4500 as documented in Documentation/admin-guide/acpi/fan_performance_states.rst While at it, return the correct error code from acpi_fan_probe() when acpi_fan_get_fps() or acpi_fan_get_fif() fails. Suggested-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> [ rjw: Subject, changelog, documentation ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-12-13 23:48:40 +00:00
goto err_end;
}
}
if (!strncmp(pdev->name, "PNP0C0B", strlen("PNP0C0B")))
name = "Fan";
else
name = acpi_device_bid(device);
cdev = thermal_cooling_device_register(name, device,
&fan_cooling_ops);
if (IS_ERR(cdev)) {
result = PTR_ERR(cdev);
ACPI: fan: Expose fan performance state information When _FPS indicates variable speed fan support, the thermal cooling device for fan shows max performance state count as "max_state" (greater than or equal to 1). But the thermal cooling device doesn't expose the properties of each performance state. This is not enough for smart fan control user space software, which also considers speed, power and noise level. This change exposes the properties of the fan performance states in the sysfs directory of the ACPI device representing the fan, that is /sys/bus/acpi/devices/devices/INT3404:00 or /sys/bus/platform/devices/PNP0C0B:00. For example: $ ls /sys/bus/acpi/devices/INT3404\:00 description path state0 state11 state4 state7 status hid physical_node state1 state2 state5 state8 subsystem modalias power state10 state3 state6 state9 uevent uid wakeup where each state* attribute lists the properties of a fan performance state in the following format: control_percent:trip_point:speed_rpm:noise_level_mdb:power_mw $ cat /sys/bus/acpi/devices/INT3404\:00/state10 95:0:11600:47500:4500 as documented in Documentation/admin-guide/acpi/fan_performance_states.rst While at it, return the correct error code from acpi_fan_probe() when acpi_fan_get_fps() or acpi_fan_get_fif() fails. Suggested-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> [ rjw: Subject, changelog, documentation ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-12-13 23:48:40 +00:00
goto err_end;
}
dev_dbg(&pdev->dev, "registered as cooling_device%d\n", cdev->id);
fan->cdev = cdev;
result = sysfs_create_link(&pdev->dev.kobj,
&cdev->device.kobj,
"thermal_cooling");
if (result)
Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux Pull thermal management updates from Zhang Rui: "Sorry that I missed the merge window as there is a bug found in the last minute, and I have to fix it and wait for the code to be tested in linux-next tree for a few days. Now the buggy patch has been dropped entirely from my next branch. Thus I hope those changes can still be merged in 3.18-rc2 as most of them are platform thermal driver changes. Specifics: - introduce ACPI INT340X thermal drivers. Newer laptops and tablets may have thermal sensors and other devices with thermal control capabilities that are exposed for the OS to use via the ACPI INT340x device objects. Several drivers are introduced to expose the temperature information and cooling ability from these objects to user-space via the normal thermal framework. From: Lu Aaron, Lan Tianyu, Jacob Pan and Zhang Rui. - introduce a new thermal governor, which just uses a hysteresis to switch abruptly on/off a cooling device. This governor can be used to control certain fan devices that can not be throttled but just switched on or off. From: Peter Feuerer. - introduce support for some new thermal interrupt functions on i.MX6SX, in IMX thermal driver. From: Anson, Huang. - introduce tracing support on thermal framework. From: Punit Agrawal. - small fixes in OF thermal and thermal step_wise governor" * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux: (25 commits) Thermal: int340x thermal: select ACPI fan driver Thermal: int3400_thermal: use acpi_thermal_rel parsing APIs Thermal: int340x_thermal: expose acpi thermal relationship tables Thermal: introduce int3403 thermal driver Thermal: introduce INT3402 thermal driver Thermal: move the KELVIN_TO_MILLICELSIUS macro to thermal.h ACPI / Fan: support INT3404 thermal device ACPI / Fan: add ACPI 4.0 style fan support ACPI / fan: convert to platform driver ACPI / fan: use acpi_device_xxx_power instead of acpi_bus equivelant ACPI / fan: remove no need check for device pointer ACPI / fan: remove unused macro Thermal: int3400 thermal: register to thermal framework Thermal: int3400 thermal: add capability to detect supporting UUIDs Thermal: introduce int3400 thermal driver ACPI: add ACPI_TYPE_LOCAL_REFERENCE support to acpi_extract_package() ACPI: make acpi_create_platform_device() an external API thermal: step_wise: fix: Prevent from binary overflow when trend is dropping ACPI: introduce ACPI int340x thermal scan handler thermal: Added Bang-bang thermal governor ...
2014-10-24 18:21:43 +00:00
dev_err(&pdev->dev, "Failed to create sysfs link 'thermal_cooling'\n");
result = sysfs_create_link(&cdev->device.kobj,
&pdev->dev.kobj,
"device");
ACPI: fan: Expose fan performance state information When _FPS indicates variable speed fan support, the thermal cooling device for fan shows max performance state count as "max_state" (greater than or equal to 1). But the thermal cooling device doesn't expose the properties of each performance state. This is not enough for smart fan control user space software, which also considers speed, power and noise level. This change exposes the properties of the fan performance states in the sysfs directory of the ACPI device representing the fan, that is /sys/bus/acpi/devices/devices/INT3404:00 or /sys/bus/platform/devices/PNP0C0B:00. For example: $ ls /sys/bus/acpi/devices/INT3404\:00 description path state0 state11 state4 state7 status hid physical_node state1 state2 state5 state8 subsystem modalias power state10 state3 state6 state9 uevent uid wakeup where each state* attribute lists the properties of a fan performance state in the following format: control_percent:trip_point:speed_rpm:noise_level_mdb:power_mw $ cat /sys/bus/acpi/devices/INT3404\:00/state10 95:0:11600:47500:4500 as documented in Documentation/admin-guide/acpi/fan_performance_states.rst While at it, return the correct error code from acpi_fan_probe() when acpi_fan_get_fps() or acpi_fan_get_fif() fails. Suggested-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> [ rjw: Subject, changelog, documentation ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-12-13 23:48:40 +00:00
if (result) {
Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux Pull thermal management updates from Zhang Rui: "Sorry that I missed the merge window as there is a bug found in the last minute, and I have to fix it and wait for the code to be tested in linux-next tree for a few days. Now the buggy patch has been dropped entirely from my next branch. Thus I hope those changes can still be merged in 3.18-rc2 as most of them are platform thermal driver changes. Specifics: - introduce ACPI INT340X thermal drivers. Newer laptops and tablets may have thermal sensors and other devices with thermal control capabilities that are exposed for the OS to use via the ACPI INT340x device objects. Several drivers are introduced to expose the temperature information and cooling ability from these objects to user-space via the normal thermal framework. From: Lu Aaron, Lan Tianyu, Jacob Pan and Zhang Rui. - introduce a new thermal governor, which just uses a hysteresis to switch abruptly on/off a cooling device. This governor can be used to control certain fan devices that can not be throttled but just switched on or off. From: Peter Feuerer. - introduce support for some new thermal interrupt functions on i.MX6SX, in IMX thermal driver. From: Anson, Huang. - introduce tracing support on thermal framework. From: Punit Agrawal. - small fixes in OF thermal and thermal step_wise governor" * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux: (25 commits) Thermal: int340x thermal: select ACPI fan driver Thermal: int3400_thermal: use acpi_thermal_rel parsing APIs Thermal: int340x_thermal: expose acpi thermal relationship tables Thermal: introduce int3403 thermal driver Thermal: introduce INT3402 thermal driver Thermal: move the KELVIN_TO_MILLICELSIUS macro to thermal.h ACPI / Fan: support INT3404 thermal device ACPI / Fan: add ACPI 4.0 style fan support ACPI / fan: convert to platform driver ACPI / fan: use acpi_device_xxx_power instead of acpi_bus equivelant ACPI / fan: remove no need check for device pointer ACPI / fan: remove unused macro Thermal: int3400 thermal: register to thermal framework Thermal: int3400 thermal: add capability to detect supporting UUIDs Thermal: introduce int3400 thermal driver ACPI: add ACPI_TYPE_LOCAL_REFERENCE support to acpi_extract_package() ACPI: make acpi_create_platform_device() an external API thermal: step_wise: fix: Prevent from binary overflow when trend is dropping ACPI: introduce ACPI int340x thermal scan handler thermal: Added Bang-bang thermal governor ...
2014-10-24 18:21:43 +00:00
dev_err(&pdev->dev, "Failed to create sysfs link 'device'\n");
ACPI: fan: Expose fan performance state information When _FPS indicates variable speed fan support, the thermal cooling device for fan shows max performance state count as "max_state" (greater than or equal to 1). But the thermal cooling device doesn't expose the properties of each performance state. This is not enough for smart fan control user space software, which also considers speed, power and noise level. This change exposes the properties of the fan performance states in the sysfs directory of the ACPI device representing the fan, that is /sys/bus/acpi/devices/devices/INT3404:00 or /sys/bus/platform/devices/PNP0C0B:00. For example: $ ls /sys/bus/acpi/devices/INT3404\:00 description path state0 state11 state4 state7 status hid physical_node state1 state2 state5 state8 subsystem modalias power state10 state3 state6 state9 uevent uid wakeup where each state* attribute lists the properties of a fan performance state in the following format: control_percent:trip_point:speed_rpm:noise_level_mdb:power_mw $ cat /sys/bus/acpi/devices/INT3404\:00/state10 95:0:11600:47500:4500 as documented in Documentation/admin-guide/acpi/fan_performance_states.rst While at it, return the correct error code from acpi_fan_probe() when acpi_fan_get_fps() or acpi_fan_get_fif() fails. Suggested-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> [ rjw: Subject, changelog, documentation ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-12-13 23:48:40 +00:00
goto err_end;
}
return 0;
err_end:
if (fan->acpi4) {
int i;
for (i = 0; i < fan->fps_count; ++i)
sysfs_remove_file(&device->dev.kobj, &fan->fps[i].dev_attr.attr);
}
return result;
}
static int acpi_fan_remove(struct platform_device *pdev)
{
struct acpi_fan *fan = platform_get_drvdata(pdev);
ACPI: fan: Expose fan performance state information When _FPS indicates variable speed fan support, the thermal cooling device for fan shows max performance state count as "max_state" (greater than or equal to 1). But the thermal cooling device doesn't expose the properties of each performance state. This is not enough for smart fan control user space software, which also considers speed, power and noise level. This change exposes the properties of the fan performance states in the sysfs directory of the ACPI device representing the fan, that is /sys/bus/acpi/devices/devices/INT3404:00 or /sys/bus/platform/devices/PNP0C0B:00. For example: $ ls /sys/bus/acpi/devices/INT3404\:00 description path state0 state11 state4 state7 status hid physical_node state1 state2 state5 state8 subsystem modalias power state10 state3 state6 state9 uevent uid wakeup where each state* attribute lists the properties of a fan performance state in the following format: control_percent:trip_point:speed_rpm:noise_level_mdb:power_mw $ cat /sys/bus/acpi/devices/INT3404\:00/state10 95:0:11600:47500:4500 as documented in Documentation/admin-guide/acpi/fan_performance_states.rst While at it, return the correct error code from acpi_fan_probe() when acpi_fan_get_fps() or acpi_fan_get_fif() fails. Suggested-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> [ rjw: Subject, changelog, documentation ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-12-13 23:48:40 +00:00
if (fan->acpi4) {
struct acpi_device *device = ACPI_COMPANION(&pdev->dev);
int i;
for (i = 0; i < fan->fps_count; ++i)
sysfs_remove_file(&device->dev.kobj, &fan->fps[i].dev_attr.attr);
}
sysfs_remove_link(&pdev->dev.kobj, "thermal_cooling");
sysfs_remove_link(&fan->cdev->device.kobj, "device");
thermal_cooling_device_unregister(fan->cdev);
return 0;
}
#ifdef CONFIG_PM_SLEEP
static int acpi_fan_suspend(struct device *dev)
{
struct acpi_fan *fan = dev_get_drvdata(dev);
if (fan->acpi4)
return 0;
acpi_device_set_power(ACPI_COMPANION(dev), ACPI_STATE_D0);
return AE_OK;
}
static int acpi_fan_resume(struct device *dev)
{
int result;
struct acpi_fan *fan = dev_get_drvdata(dev);
if (fan->acpi4)
return 0;
result = acpi_device_update_power(ACPI_COMPANION(dev), NULL);
if (result)
dev_err(dev, "Error updating fan power state\n");
return result;
}
#endif
module_platform_driver(acpi_fan_driver);