linux/mm/damon/dbgfs.c

1149 lines
25 KiB
C
Raw Normal View History

mm/damon: implement a debugfs-based user space interface DAMON is designed to be used by kernel space code such as the memory management subsystems, and therefore it provides only kernel space API. That said, letting the user space control DAMON could provide some benefits to them. For example, it will allow user space to analyze their specific workloads and make their own special optimizations. For such cases, this commit implements a simple DAMON application kernel module, namely 'damon-dbgfs', which merely wraps the DAMON api and exports those to the user space via the debugfs. 'damon-dbgfs' exports three files, ``attrs``, ``target_ids``, and ``monitor_on`` under its debugfs directory, ``<debugfs>/damon/``. Attributes ---------- Users can read and write the ``sampling interval``, ``aggregation interval``, ``regions update interval``, and min/max number of monitoring target regions by reading from and writing to the ``attrs`` file. For example, below commands set those values to 5 ms, 100 ms, 1,000 ms, 10, 1000 and check it again:: # cd <debugfs>/damon # echo 5000 100000 1000000 10 1000 > attrs # cat attrs 5000 100000 1000000 10 1000 Target IDs ---------- Some types of address spaces supports multiple monitoring target. For example, the virtual memory address spaces monitoring can have multiple processes as the monitoring targets. Users can set the targets by writing relevant id values of the targets to, and get the ids of the current targets by reading from the ``target_ids`` file. In case of the virtual address spaces monitoring, the values should be pids of the monitoring target processes. For example, below commands set processes having pids 42 and 4242 as the monitoring targets and check it again:: # cd <debugfs>/damon # echo 42 4242 > target_ids # cat target_ids 42 4242 Note that setting the target ids doesn't start the monitoring. Turning On/Off -------------- Setting the files as described above doesn't incur effect unless you explicitly start the monitoring. You can start, stop, and check the current status of the monitoring by writing to and reading from the ``monitor_on`` file. Writing ``on`` to the file starts the monitoring of the targets with the attributes. Writing ``off`` to the file stops those. DAMON also stops if every targets are invalidated (in case of the virtual memory monitoring, target processes are invalidated when terminated). Below example commands turn on, off, and check the status of DAMON:: # cd <debugfs>/damon # echo on > monitor_on # echo off > monitor_on # cat monitor_on off Please note that you cannot write to the above-mentioned debugfs files while the monitoring is turned on. If you write to the files while DAMON is running, an error code such as ``-EBUSY`` will be returned. [akpm@linux-foundation.org: remove unneeded "alloc failed" printks] [akpm@linux-foundation.org: replace macro with static inline] Link: https://lkml.kernel.org/r/20210716081449.22187-8-sj38.park@gmail.com Signed-off-by: SeongJae Park <sjpark@amazon.de> Reviewed-by: Leonard Foerster <foersleo@amazon.de> Reviewed-by: Fernand Sieber <sieberf@amazon.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Amit Shah <amit@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Brendan Higgins <brendanhiggins@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: David Woodhouse <dwmw@amazon.com> Cc: Fan Du <fan.du@intel.com> Cc: Greg Kroah-Hartman <greg@kroah.com> Cc: Greg Thelen <gthelen@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joe Perches <joe@perches.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Marco Elver <elver@google.com> Cc: Markus Boehme <markubo@amazon.de> Cc: Maximilian Heyne <mheyne@amazon.de> Cc: Mel Gorman <mgorman@suse.de> Cc: Minchan Kim <minchan@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@surriel.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-08 02:56:53 +00:00
// SPDX-License-Identifier: GPL-2.0
/*
* DAMON Debugfs Interface
*
* Author: SeongJae Park <sj@kernel.org>
mm/damon: implement a debugfs-based user space interface DAMON is designed to be used by kernel space code such as the memory management subsystems, and therefore it provides only kernel space API. That said, letting the user space control DAMON could provide some benefits to them. For example, it will allow user space to analyze their specific workloads and make their own special optimizations. For such cases, this commit implements a simple DAMON application kernel module, namely 'damon-dbgfs', which merely wraps the DAMON api and exports those to the user space via the debugfs. 'damon-dbgfs' exports three files, ``attrs``, ``target_ids``, and ``monitor_on`` under its debugfs directory, ``<debugfs>/damon/``. Attributes ---------- Users can read and write the ``sampling interval``, ``aggregation interval``, ``regions update interval``, and min/max number of monitoring target regions by reading from and writing to the ``attrs`` file. For example, below commands set those values to 5 ms, 100 ms, 1,000 ms, 10, 1000 and check it again:: # cd <debugfs>/damon # echo 5000 100000 1000000 10 1000 > attrs # cat attrs 5000 100000 1000000 10 1000 Target IDs ---------- Some types of address spaces supports multiple monitoring target. For example, the virtual memory address spaces monitoring can have multiple processes as the monitoring targets. Users can set the targets by writing relevant id values of the targets to, and get the ids of the current targets by reading from the ``target_ids`` file. In case of the virtual address spaces monitoring, the values should be pids of the monitoring target processes. For example, below commands set processes having pids 42 and 4242 as the monitoring targets and check it again:: # cd <debugfs>/damon # echo 42 4242 > target_ids # cat target_ids 42 4242 Note that setting the target ids doesn't start the monitoring. Turning On/Off -------------- Setting the files as described above doesn't incur effect unless you explicitly start the monitoring. You can start, stop, and check the current status of the monitoring by writing to and reading from the ``monitor_on`` file. Writing ``on`` to the file starts the monitoring of the targets with the attributes. Writing ``off`` to the file stops those. DAMON also stops if every targets are invalidated (in case of the virtual memory monitoring, target processes are invalidated when terminated). Below example commands turn on, off, and check the status of DAMON:: # cd <debugfs>/damon # echo on > monitor_on # echo off > monitor_on # cat monitor_on off Please note that you cannot write to the above-mentioned debugfs files while the monitoring is turned on. If you write to the files while DAMON is running, an error code such as ``-EBUSY`` will be returned. [akpm@linux-foundation.org: remove unneeded "alloc failed" printks] [akpm@linux-foundation.org: replace macro with static inline] Link: https://lkml.kernel.org/r/20210716081449.22187-8-sj38.park@gmail.com Signed-off-by: SeongJae Park <sjpark@amazon.de> Reviewed-by: Leonard Foerster <foersleo@amazon.de> Reviewed-by: Fernand Sieber <sieberf@amazon.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Amit Shah <amit@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Brendan Higgins <brendanhiggins@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: David Woodhouse <dwmw@amazon.com> Cc: Fan Du <fan.du@intel.com> Cc: Greg Kroah-Hartman <greg@kroah.com> Cc: Greg Thelen <gthelen@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joe Perches <joe@perches.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Marco Elver <elver@google.com> Cc: Markus Boehme <markubo@amazon.de> Cc: Maximilian Heyne <mheyne@amazon.de> Cc: Mel Gorman <mgorman@suse.de> Cc: Minchan Kim <minchan@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@surriel.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-08 02:56:53 +00:00
*/
#define pr_fmt(fmt) "damon-dbgfs: " fmt
#include <linux/damon.h>
#include <linux/debugfs.h>
#include <linux/file.h>
#include <linux/mm.h>
#include <linux/module.h>
#include <linux/page_idle.h>
#include <linux/slab.h>
#define DAMON_DBGFS_DEPRECATION_NOTICE \
"DAMON debugfs interface is deprecated, so users should move " \
"to DAMON_SYSFS. If you cannot, please report your usecase to " \
"damon@lists.linux.dev and linux-mm@kvack.org.\n"
mm/damon: implement a debugfs-based user space interface DAMON is designed to be used by kernel space code such as the memory management subsystems, and therefore it provides only kernel space API. That said, letting the user space control DAMON could provide some benefits to them. For example, it will allow user space to analyze their specific workloads and make their own special optimizations. For such cases, this commit implements a simple DAMON application kernel module, namely 'damon-dbgfs', which merely wraps the DAMON api and exports those to the user space via the debugfs. 'damon-dbgfs' exports three files, ``attrs``, ``target_ids``, and ``monitor_on`` under its debugfs directory, ``<debugfs>/damon/``. Attributes ---------- Users can read and write the ``sampling interval``, ``aggregation interval``, ``regions update interval``, and min/max number of monitoring target regions by reading from and writing to the ``attrs`` file. For example, below commands set those values to 5 ms, 100 ms, 1,000 ms, 10, 1000 and check it again:: # cd <debugfs>/damon # echo 5000 100000 1000000 10 1000 > attrs # cat attrs 5000 100000 1000000 10 1000 Target IDs ---------- Some types of address spaces supports multiple monitoring target. For example, the virtual memory address spaces monitoring can have multiple processes as the monitoring targets. Users can set the targets by writing relevant id values of the targets to, and get the ids of the current targets by reading from the ``target_ids`` file. In case of the virtual address spaces monitoring, the values should be pids of the monitoring target processes. For example, below commands set processes having pids 42 and 4242 as the monitoring targets and check it again:: # cd <debugfs>/damon # echo 42 4242 > target_ids # cat target_ids 42 4242 Note that setting the target ids doesn't start the monitoring. Turning On/Off -------------- Setting the files as described above doesn't incur effect unless you explicitly start the monitoring. You can start, stop, and check the current status of the monitoring by writing to and reading from the ``monitor_on`` file. Writing ``on`` to the file starts the monitoring of the targets with the attributes. Writing ``off`` to the file stops those. DAMON also stops if every targets are invalidated (in case of the virtual memory monitoring, target processes are invalidated when terminated). Below example commands turn on, off, and check the status of DAMON:: # cd <debugfs>/damon # echo on > monitor_on # echo off > monitor_on # cat monitor_on off Please note that you cannot write to the above-mentioned debugfs files while the monitoring is turned on. If you write to the files while DAMON is running, an error code such as ``-EBUSY`` will be returned. [akpm@linux-foundation.org: remove unneeded "alloc failed" printks] [akpm@linux-foundation.org: replace macro with static inline] Link: https://lkml.kernel.org/r/20210716081449.22187-8-sj38.park@gmail.com Signed-off-by: SeongJae Park <sjpark@amazon.de> Reviewed-by: Leonard Foerster <foersleo@amazon.de> Reviewed-by: Fernand Sieber <sieberf@amazon.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Amit Shah <amit@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Brendan Higgins <brendanhiggins@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: David Woodhouse <dwmw@amazon.com> Cc: Fan Du <fan.du@intel.com> Cc: Greg Kroah-Hartman <greg@kroah.com> Cc: Greg Thelen <gthelen@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joe Perches <joe@perches.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Marco Elver <elver@google.com> Cc: Markus Boehme <markubo@amazon.de> Cc: Maximilian Heyne <mheyne@amazon.de> Cc: Mel Gorman <mgorman@suse.de> Cc: Minchan Kim <minchan@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@surriel.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-08 02:56:53 +00:00
static struct damon_ctx **dbgfs_ctxs;
static int dbgfs_nr_ctxs;
static struct dentry **dbgfs_dirs;
mm/damon/dbgfs: support multiple contexts In some use cases, users would want to run multiple monitoring context. For example, if a user wants a high precision monitoring and dedicating multiple CPUs for the job is ok, because DAMON creates one monitoring thread per one context, the user can split the monitoring target regions into multiple small regions and create one context for each region. Or, someone might want to simultaneously monitor different address spaces, e.g., both virtual address space and physical address space. The DAMON's API allows such usage, but 'damon-dbgfs' does not. Therefore, only kernel space DAMON users can do multiple contexts monitoring. This commit allows the user space DAMON users to use multiple contexts monitoring by introducing two new 'damon-dbgfs' debugfs files, 'mk_context' and 'rm_context'. Users can create a new monitoring context by writing the desired name of the new context to 'mk_context'. Then, a new directory with the name and having the files for setting of the context ('attrs', 'target_ids' and 'record') will be created under the debugfs directory. Writing the name of the context to remove to 'rm_context' will remove the related context and directory. Link: https://lkml.kernel.org/r/20210716081449.22187-10-sj38.park@gmail.com Signed-off-by: SeongJae Park <sjpark@amazon.de> Reviewed-by: Fernand Sieber <sieberf@amazon.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Amit Shah <amit@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Brendan Higgins <brendanhiggins@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: David Woodhouse <dwmw@amazon.com> Cc: Fan Du <fan.du@intel.com> Cc: Greg Kroah-Hartman <greg@kroah.com> Cc: Greg Thelen <gthelen@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joe Perches <joe@perches.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Leonard Foerster <foersleo@amazon.de> Cc: Marco Elver <elver@google.com> Cc: Markus Boehme <markubo@amazon.de> Cc: Maximilian Heyne <mheyne@amazon.de> Cc: Mel Gorman <mgorman@suse.de> Cc: Minchan Kim <minchan@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@surriel.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-08 02:57:01 +00:00
static DEFINE_MUTEX(damon_dbgfs_lock);
mm/damon: implement a debugfs-based user space interface DAMON is designed to be used by kernel space code such as the memory management subsystems, and therefore it provides only kernel space API. That said, letting the user space control DAMON could provide some benefits to them. For example, it will allow user space to analyze their specific workloads and make their own special optimizations. For such cases, this commit implements a simple DAMON application kernel module, namely 'damon-dbgfs', which merely wraps the DAMON api and exports those to the user space via the debugfs. 'damon-dbgfs' exports three files, ``attrs``, ``target_ids``, and ``monitor_on`` under its debugfs directory, ``<debugfs>/damon/``. Attributes ---------- Users can read and write the ``sampling interval``, ``aggregation interval``, ``regions update interval``, and min/max number of monitoring target regions by reading from and writing to the ``attrs`` file. For example, below commands set those values to 5 ms, 100 ms, 1,000 ms, 10, 1000 and check it again:: # cd <debugfs>/damon # echo 5000 100000 1000000 10 1000 > attrs # cat attrs 5000 100000 1000000 10 1000 Target IDs ---------- Some types of address spaces supports multiple monitoring target. For example, the virtual memory address spaces monitoring can have multiple processes as the monitoring targets. Users can set the targets by writing relevant id values of the targets to, and get the ids of the current targets by reading from the ``target_ids`` file. In case of the virtual address spaces monitoring, the values should be pids of the monitoring target processes. For example, below commands set processes having pids 42 and 4242 as the monitoring targets and check it again:: # cd <debugfs>/damon # echo 42 4242 > target_ids # cat target_ids 42 4242 Note that setting the target ids doesn't start the monitoring. Turning On/Off -------------- Setting the files as described above doesn't incur effect unless you explicitly start the monitoring. You can start, stop, and check the current status of the monitoring by writing to and reading from the ``monitor_on`` file. Writing ``on`` to the file starts the monitoring of the targets with the attributes. Writing ``off`` to the file stops those. DAMON also stops if every targets are invalidated (in case of the virtual memory monitoring, target processes are invalidated when terminated). Below example commands turn on, off, and check the status of DAMON:: # cd <debugfs>/damon # echo on > monitor_on # echo off > monitor_on # cat monitor_on off Please note that you cannot write to the above-mentioned debugfs files while the monitoring is turned on. If you write to the files while DAMON is running, an error code such as ``-EBUSY`` will be returned. [akpm@linux-foundation.org: remove unneeded "alloc failed" printks] [akpm@linux-foundation.org: replace macro with static inline] Link: https://lkml.kernel.org/r/20210716081449.22187-8-sj38.park@gmail.com Signed-off-by: SeongJae Park <sjpark@amazon.de> Reviewed-by: Leonard Foerster <foersleo@amazon.de> Reviewed-by: Fernand Sieber <sieberf@amazon.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Amit Shah <amit@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Brendan Higgins <brendanhiggins@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: David Woodhouse <dwmw@amazon.com> Cc: Fan Du <fan.du@intel.com> Cc: Greg Kroah-Hartman <greg@kroah.com> Cc: Greg Thelen <gthelen@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joe Perches <joe@perches.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Marco Elver <elver@google.com> Cc: Markus Boehme <markubo@amazon.de> Cc: Maximilian Heyne <mheyne@amazon.de> Cc: Mel Gorman <mgorman@suse.de> Cc: Minchan Kim <minchan@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@surriel.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-08 02:56:53 +00:00
static void damon_dbgfs_warn_deprecation(void)
{
pr_warn_once(DAMON_DBGFS_DEPRECATION_NOTICE);
}
mm/damon: implement a debugfs-based user space interface DAMON is designed to be used by kernel space code such as the memory management subsystems, and therefore it provides only kernel space API. That said, letting the user space control DAMON could provide some benefits to them. For example, it will allow user space to analyze their specific workloads and make their own special optimizations. For such cases, this commit implements a simple DAMON application kernel module, namely 'damon-dbgfs', which merely wraps the DAMON api and exports those to the user space via the debugfs. 'damon-dbgfs' exports three files, ``attrs``, ``target_ids``, and ``monitor_on`` under its debugfs directory, ``<debugfs>/damon/``. Attributes ---------- Users can read and write the ``sampling interval``, ``aggregation interval``, ``regions update interval``, and min/max number of monitoring target regions by reading from and writing to the ``attrs`` file. For example, below commands set those values to 5 ms, 100 ms, 1,000 ms, 10, 1000 and check it again:: # cd <debugfs>/damon # echo 5000 100000 1000000 10 1000 > attrs # cat attrs 5000 100000 1000000 10 1000 Target IDs ---------- Some types of address spaces supports multiple monitoring target. For example, the virtual memory address spaces monitoring can have multiple processes as the monitoring targets. Users can set the targets by writing relevant id values of the targets to, and get the ids of the current targets by reading from the ``target_ids`` file. In case of the virtual address spaces monitoring, the values should be pids of the monitoring target processes. For example, below commands set processes having pids 42 and 4242 as the monitoring targets and check it again:: # cd <debugfs>/damon # echo 42 4242 > target_ids # cat target_ids 42 4242 Note that setting the target ids doesn't start the monitoring. Turning On/Off -------------- Setting the files as described above doesn't incur effect unless you explicitly start the monitoring. You can start, stop, and check the current status of the monitoring by writing to and reading from the ``monitor_on`` file. Writing ``on`` to the file starts the monitoring of the targets with the attributes. Writing ``off`` to the file stops those. DAMON also stops if every targets are invalidated (in case of the virtual memory monitoring, target processes are invalidated when terminated). Below example commands turn on, off, and check the status of DAMON:: # cd <debugfs>/damon # echo on > monitor_on # echo off > monitor_on # cat monitor_on off Please note that you cannot write to the above-mentioned debugfs files while the monitoring is turned on. If you write to the files while DAMON is running, an error code such as ``-EBUSY`` will be returned. [akpm@linux-foundation.org: remove unneeded "alloc failed" printks] [akpm@linux-foundation.org: replace macro with static inline] Link: https://lkml.kernel.org/r/20210716081449.22187-8-sj38.park@gmail.com Signed-off-by: SeongJae Park <sjpark@amazon.de> Reviewed-by: Leonard Foerster <foersleo@amazon.de> Reviewed-by: Fernand Sieber <sieberf@amazon.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Amit Shah <amit@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Brendan Higgins <brendanhiggins@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: David Woodhouse <dwmw@amazon.com> Cc: Fan Du <fan.du@intel.com> Cc: Greg Kroah-Hartman <greg@kroah.com> Cc: Greg Thelen <gthelen@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joe Perches <joe@perches.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Marco Elver <elver@google.com> Cc: Markus Boehme <markubo@amazon.de> Cc: Maximilian Heyne <mheyne@amazon.de> Cc: Mel Gorman <mgorman@suse.de> Cc: Minchan Kim <minchan@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@surriel.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-08 02:56:53 +00:00
/*
* Returns non-empty string on success, negative error code otherwise.
*/
static char *user_input_str(const char __user *buf, size_t count, loff_t *ppos)
{
char *kbuf;
ssize_t ret;
/* We do not accept continuous write */
if (*ppos)
return ERR_PTR(-EINVAL);
kbuf = kmalloc(count + 1, GFP_KERNEL | __GFP_NOWARN);
mm/damon: implement a debugfs-based user space interface DAMON is designed to be used by kernel space code such as the memory management subsystems, and therefore it provides only kernel space API. That said, letting the user space control DAMON could provide some benefits to them. For example, it will allow user space to analyze their specific workloads and make their own special optimizations. For such cases, this commit implements a simple DAMON application kernel module, namely 'damon-dbgfs', which merely wraps the DAMON api and exports those to the user space via the debugfs. 'damon-dbgfs' exports three files, ``attrs``, ``target_ids``, and ``monitor_on`` under its debugfs directory, ``<debugfs>/damon/``. Attributes ---------- Users can read and write the ``sampling interval``, ``aggregation interval``, ``regions update interval``, and min/max number of monitoring target regions by reading from and writing to the ``attrs`` file. For example, below commands set those values to 5 ms, 100 ms, 1,000 ms, 10, 1000 and check it again:: # cd <debugfs>/damon # echo 5000 100000 1000000 10 1000 > attrs # cat attrs 5000 100000 1000000 10 1000 Target IDs ---------- Some types of address spaces supports multiple monitoring target. For example, the virtual memory address spaces monitoring can have multiple processes as the monitoring targets. Users can set the targets by writing relevant id values of the targets to, and get the ids of the current targets by reading from the ``target_ids`` file. In case of the virtual address spaces monitoring, the values should be pids of the monitoring target processes. For example, below commands set processes having pids 42 and 4242 as the monitoring targets and check it again:: # cd <debugfs>/damon # echo 42 4242 > target_ids # cat target_ids 42 4242 Note that setting the target ids doesn't start the monitoring. Turning On/Off -------------- Setting the files as described above doesn't incur effect unless you explicitly start the monitoring. You can start, stop, and check the current status of the monitoring by writing to and reading from the ``monitor_on`` file. Writing ``on`` to the file starts the monitoring of the targets with the attributes. Writing ``off`` to the file stops those. DAMON also stops if every targets are invalidated (in case of the virtual memory monitoring, target processes are invalidated when terminated). Below example commands turn on, off, and check the status of DAMON:: # cd <debugfs>/damon # echo on > monitor_on # echo off > monitor_on # cat monitor_on off Please note that you cannot write to the above-mentioned debugfs files while the monitoring is turned on. If you write to the files while DAMON is running, an error code such as ``-EBUSY`` will be returned. [akpm@linux-foundation.org: remove unneeded "alloc failed" printks] [akpm@linux-foundation.org: replace macro with static inline] Link: https://lkml.kernel.org/r/20210716081449.22187-8-sj38.park@gmail.com Signed-off-by: SeongJae Park <sjpark@amazon.de> Reviewed-by: Leonard Foerster <foersleo@amazon.de> Reviewed-by: Fernand Sieber <sieberf@amazon.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Amit Shah <amit@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Brendan Higgins <brendanhiggins@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: David Woodhouse <dwmw@amazon.com> Cc: Fan Du <fan.du@intel.com> Cc: Greg Kroah-Hartman <greg@kroah.com> Cc: Greg Thelen <gthelen@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joe Perches <joe@perches.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Marco Elver <elver@google.com> Cc: Markus Boehme <markubo@amazon.de> Cc: Maximilian Heyne <mheyne@amazon.de> Cc: Mel Gorman <mgorman@suse.de> Cc: Minchan Kim <minchan@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@surriel.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-08 02:56:53 +00:00
if (!kbuf)
return ERR_PTR(-ENOMEM);
ret = simple_write_to_buffer(kbuf, count + 1, ppos, buf, count);
if (ret != count) {
kfree(kbuf);
return ERR_PTR(-EIO);
}
kbuf[ret] = '\0';
return kbuf;
}
static ssize_t dbgfs_attrs_read(struct file *file,
char __user *buf, size_t count, loff_t *ppos)
{
struct damon_ctx *ctx = file->private_data;
char kbuf[128];
int ret;
mutex_lock(&ctx->kdamond_lock);
ret = scnprintf(kbuf, ARRAY_SIZE(kbuf), "%lu %lu %lu %lu %lu\n",
ctx->attrs.sample_interval, ctx->attrs.aggr_interval,
ctx->attrs.ops_update_interval,
ctx->attrs.min_nr_regions, ctx->attrs.max_nr_regions);
mm/damon: implement a debugfs-based user space interface DAMON is designed to be used by kernel space code such as the memory management subsystems, and therefore it provides only kernel space API. That said, letting the user space control DAMON could provide some benefits to them. For example, it will allow user space to analyze their specific workloads and make their own special optimizations. For such cases, this commit implements a simple DAMON application kernel module, namely 'damon-dbgfs', which merely wraps the DAMON api and exports those to the user space via the debugfs. 'damon-dbgfs' exports three files, ``attrs``, ``target_ids``, and ``monitor_on`` under its debugfs directory, ``<debugfs>/damon/``. Attributes ---------- Users can read and write the ``sampling interval``, ``aggregation interval``, ``regions update interval``, and min/max number of monitoring target regions by reading from and writing to the ``attrs`` file. For example, below commands set those values to 5 ms, 100 ms, 1,000 ms, 10, 1000 and check it again:: # cd <debugfs>/damon # echo 5000 100000 1000000 10 1000 > attrs # cat attrs 5000 100000 1000000 10 1000 Target IDs ---------- Some types of address spaces supports multiple monitoring target. For example, the virtual memory address spaces monitoring can have multiple processes as the monitoring targets. Users can set the targets by writing relevant id values of the targets to, and get the ids of the current targets by reading from the ``target_ids`` file. In case of the virtual address spaces monitoring, the values should be pids of the monitoring target processes. For example, below commands set processes having pids 42 and 4242 as the monitoring targets and check it again:: # cd <debugfs>/damon # echo 42 4242 > target_ids # cat target_ids 42 4242 Note that setting the target ids doesn't start the monitoring. Turning On/Off -------------- Setting the files as described above doesn't incur effect unless you explicitly start the monitoring. You can start, stop, and check the current status of the monitoring by writing to and reading from the ``monitor_on`` file. Writing ``on`` to the file starts the monitoring of the targets with the attributes. Writing ``off`` to the file stops those. DAMON also stops if every targets are invalidated (in case of the virtual memory monitoring, target processes are invalidated when terminated). Below example commands turn on, off, and check the status of DAMON:: # cd <debugfs>/damon # echo on > monitor_on # echo off > monitor_on # cat monitor_on off Please note that you cannot write to the above-mentioned debugfs files while the monitoring is turned on. If you write to the files while DAMON is running, an error code such as ``-EBUSY`` will be returned. [akpm@linux-foundation.org: remove unneeded "alloc failed" printks] [akpm@linux-foundation.org: replace macro with static inline] Link: https://lkml.kernel.org/r/20210716081449.22187-8-sj38.park@gmail.com Signed-off-by: SeongJae Park <sjpark@amazon.de> Reviewed-by: Leonard Foerster <foersleo@amazon.de> Reviewed-by: Fernand Sieber <sieberf@amazon.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Amit Shah <amit@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Brendan Higgins <brendanhiggins@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: David Woodhouse <dwmw@amazon.com> Cc: Fan Du <fan.du@intel.com> Cc: Greg Kroah-Hartman <greg@kroah.com> Cc: Greg Thelen <gthelen@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joe Perches <joe@perches.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Marco Elver <elver@google.com> Cc: Markus Boehme <markubo@amazon.de> Cc: Maximilian Heyne <mheyne@amazon.de> Cc: Mel Gorman <mgorman@suse.de> Cc: Minchan Kim <minchan@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@surriel.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-08 02:56:53 +00:00
mutex_unlock(&ctx->kdamond_lock);
return simple_read_from_buffer(buf, count, ppos, kbuf, ret);
}
static ssize_t dbgfs_attrs_write(struct file *file,
const char __user *buf, size_t count, loff_t *ppos)
{
struct damon_ctx *ctx = file->private_data;
struct damon_attrs attrs;
mm/damon: implement a debugfs-based user space interface DAMON is designed to be used by kernel space code such as the memory management subsystems, and therefore it provides only kernel space API. That said, letting the user space control DAMON could provide some benefits to them. For example, it will allow user space to analyze their specific workloads and make their own special optimizations. For such cases, this commit implements a simple DAMON application kernel module, namely 'damon-dbgfs', which merely wraps the DAMON api and exports those to the user space via the debugfs. 'damon-dbgfs' exports three files, ``attrs``, ``target_ids``, and ``monitor_on`` under its debugfs directory, ``<debugfs>/damon/``. Attributes ---------- Users can read and write the ``sampling interval``, ``aggregation interval``, ``regions update interval``, and min/max number of monitoring target regions by reading from and writing to the ``attrs`` file. For example, below commands set those values to 5 ms, 100 ms, 1,000 ms, 10, 1000 and check it again:: # cd <debugfs>/damon # echo 5000 100000 1000000 10 1000 > attrs # cat attrs 5000 100000 1000000 10 1000 Target IDs ---------- Some types of address spaces supports multiple monitoring target. For example, the virtual memory address spaces monitoring can have multiple processes as the monitoring targets. Users can set the targets by writing relevant id values of the targets to, and get the ids of the current targets by reading from the ``target_ids`` file. In case of the virtual address spaces monitoring, the values should be pids of the monitoring target processes. For example, below commands set processes having pids 42 and 4242 as the monitoring targets and check it again:: # cd <debugfs>/damon # echo 42 4242 > target_ids # cat target_ids 42 4242 Note that setting the target ids doesn't start the monitoring. Turning On/Off -------------- Setting the files as described above doesn't incur effect unless you explicitly start the monitoring. You can start, stop, and check the current status of the monitoring by writing to and reading from the ``monitor_on`` file. Writing ``on`` to the file starts the monitoring of the targets with the attributes. Writing ``off`` to the file stops those. DAMON also stops if every targets are invalidated (in case of the virtual memory monitoring, target processes are invalidated when terminated). Below example commands turn on, off, and check the status of DAMON:: # cd <debugfs>/damon # echo on > monitor_on # echo off > monitor_on # cat monitor_on off Please note that you cannot write to the above-mentioned debugfs files while the monitoring is turned on. If you write to the files while DAMON is running, an error code such as ``-EBUSY`` will be returned. [akpm@linux-foundation.org: remove unneeded "alloc failed" printks] [akpm@linux-foundation.org: replace macro with static inline] Link: https://lkml.kernel.org/r/20210716081449.22187-8-sj38.park@gmail.com Signed-off-by: SeongJae Park <sjpark@amazon.de> Reviewed-by: Leonard Foerster <foersleo@amazon.de> Reviewed-by: Fernand Sieber <sieberf@amazon.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Amit Shah <amit@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Brendan Higgins <brendanhiggins@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: David Woodhouse <dwmw@amazon.com> Cc: Fan Du <fan.du@intel.com> Cc: Greg Kroah-Hartman <greg@kroah.com> Cc: Greg Thelen <gthelen@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joe Perches <joe@perches.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Marco Elver <elver@google.com> Cc: Markus Boehme <markubo@amazon.de> Cc: Maximilian Heyne <mheyne@amazon.de> Cc: Mel Gorman <mgorman@suse.de> Cc: Minchan Kim <minchan@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@surriel.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-08 02:56:53 +00:00
char *kbuf;
ssize_t ret;
mm/damon: implement a debugfs-based user space interface DAMON is designed to be used by kernel space code such as the memory management subsystems, and therefore it provides only kernel space API. That said, letting the user space control DAMON could provide some benefits to them. For example, it will allow user space to analyze their specific workloads and make their own special optimizations. For such cases, this commit implements a simple DAMON application kernel module, namely 'damon-dbgfs', which merely wraps the DAMON api and exports those to the user space via the debugfs. 'damon-dbgfs' exports three files, ``attrs``, ``target_ids``, and ``monitor_on`` under its debugfs directory, ``<debugfs>/damon/``. Attributes ---------- Users can read and write the ``sampling interval``, ``aggregation interval``, ``regions update interval``, and min/max number of monitoring target regions by reading from and writing to the ``attrs`` file. For example, below commands set those values to 5 ms, 100 ms, 1,000 ms, 10, 1000 and check it again:: # cd <debugfs>/damon # echo 5000 100000 1000000 10 1000 > attrs # cat attrs 5000 100000 1000000 10 1000 Target IDs ---------- Some types of address spaces supports multiple monitoring target. For example, the virtual memory address spaces monitoring can have multiple processes as the monitoring targets. Users can set the targets by writing relevant id values of the targets to, and get the ids of the current targets by reading from the ``target_ids`` file. In case of the virtual address spaces monitoring, the values should be pids of the monitoring target processes. For example, below commands set processes having pids 42 and 4242 as the monitoring targets and check it again:: # cd <debugfs>/damon # echo 42 4242 > target_ids # cat target_ids 42 4242 Note that setting the target ids doesn't start the monitoring. Turning On/Off -------------- Setting the files as described above doesn't incur effect unless you explicitly start the monitoring. You can start, stop, and check the current status of the monitoring by writing to and reading from the ``monitor_on`` file. Writing ``on`` to the file starts the monitoring of the targets with the attributes. Writing ``off`` to the file stops those. DAMON also stops if every targets are invalidated (in case of the virtual memory monitoring, target processes are invalidated when terminated). Below example commands turn on, off, and check the status of DAMON:: # cd <debugfs>/damon # echo on > monitor_on # echo off > monitor_on # cat monitor_on off Please note that you cannot write to the above-mentioned debugfs files while the monitoring is turned on. If you write to the files while DAMON is running, an error code such as ``-EBUSY`` will be returned. [akpm@linux-foundation.org: remove unneeded "alloc failed" printks] [akpm@linux-foundation.org: replace macro with static inline] Link: https://lkml.kernel.org/r/20210716081449.22187-8-sj38.park@gmail.com Signed-off-by: SeongJae Park <sjpark@amazon.de> Reviewed-by: Leonard Foerster <foersleo@amazon.de> Reviewed-by: Fernand Sieber <sieberf@amazon.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Amit Shah <amit@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Brendan Higgins <brendanhiggins@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: David Woodhouse <dwmw@amazon.com> Cc: Fan Du <fan.du@intel.com> Cc: Greg Kroah-Hartman <greg@kroah.com> Cc: Greg Thelen <gthelen@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joe Perches <joe@perches.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Marco Elver <elver@google.com> Cc: Markus Boehme <markubo@amazon.de> Cc: Maximilian Heyne <mheyne@amazon.de> Cc: Mel Gorman <mgorman@suse.de> Cc: Minchan Kim <minchan@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@surriel.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-08 02:56:53 +00:00
kbuf = user_input_str(buf, count, ppos);
if (IS_ERR(kbuf))
return PTR_ERR(kbuf);
if (sscanf(kbuf, "%lu %lu %lu %lu %lu",
&attrs.sample_interval, &attrs.aggr_interval,
&attrs.ops_update_interval,
&attrs.min_nr_regions,
&attrs.max_nr_regions) != 5) {
mm/damon: implement a debugfs-based user space interface DAMON is designed to be used by kernel space code such as the memory management subsystems, and therefore it provides only kernel space API. That said, letting the user space control DAMON could provide some benefits to them. For example, it will allow user space to analyze their specific workloads and make their own special optimizations. For such cases, this commit implements a simple DAMON application kernel module, namely 'damon-dbgfs', which merely wraps the DAMON api and exports those to the user space via the debugfs. 'damon-dbgfs' exports three files, ``attrs``, ``target_ids``, and ``monitor_on`` under its debugfs directory, ``<debugfs>/damon/``. Attributes ---------- Users can read and write the ``sampling interval``, ``aggregation interval``, ``regions update interval``, and min/max number of monitoring target regions by reading from and writing to the ``attrs`` file. For example, below commands set those values to 5 ms, 100 ms, 1,000 ms, 10, 1000 and check it again:: # cd <debugfs>/damon # echo 5000 100000 1000000 10 1000 > attrs # cat attrs 5000 100000 1000000 10 1000 Target IDs ---------- Some types of address spaces supports multiple monitoring target. For example, the virtual memory address spaces monitoring can have multiple processes as the monitoring targets. Users can set the targets by writing relevant id values of the targets to, and get the ids of the current targets by reading from the ``target_ids`` file. In case of the virtual address spaces monitoring, the values should be pids of the monitoring target processes. For example, below commands set processes having pids 42 and 4242 as the monitoring targets and check it again:: # cd <debugfs>/damon # echo 42 4242 > target_ids # cat target_ids 42 4242 Note that setting the target ids doesn't start the monitoring. Turning On/Off -------------- Setting the files as described above doesn't incur effect unless you explicitly start the monitoring. You can start, stop, and check the current status of the monitoring by writing to and reading from the ``monitor_on`` file. Writing ``on`` to the file starts the monitoring of the targets with the attributes. Writing ``off`` to the file stops those. DAMON also stops if every targets are invalidated (in case of the virtual memory monitoring, target processes are invalidated when terminated). Below example commands turn on, off, and check the status of DAMON:: # cd <debugfs>/damon # echo on > monitor_on # echo off > monitor_on # cat monitor_on off Please note that you cannot write to the above-mentioned debugfs files while the monitoring is turned on. If you write to the files while DAMON is running, an error code such as ``-EBUSY`` will be returned. [akpm@linux-foundation.org: remove unneeded "alloc failed" printks] [akpm@linux-foundation.org: replace macro with static inline] Link: https://lkml.kernel.org/r/20210716081449.22187-8-sj38.park@gmail.com Signed-off-by: SeongJae Park <sjpark@amazon.de> Reviewed-by: Leonard Foerster <foersleo@amazon.de> Reviewed-by: Fernand Sieber <sieberf@amazon.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Amit Shah <amit@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Brendan Higgins <brendanhiggins@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: David Woodhouse <dwmw@amazon.com> Cc: Fan Du <fan.du@intel.com> Cc: Greg Kroah-Hartman <greg@kroah.com> Cc: Greg Thelen <gthelen@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joe Perches <joe@perches.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Marco Elver <elver@google.com> Cc: Markus Boehme <markubo@amazon.de> Cc: Maximilian Heyne <mheyne@amazon.de> Cc: Mel Gorman <mgorman@suse.de> Cc: Minchan Kim <minchan@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@surriel.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-08 02:56:53 +00:00
ret = -EINVAL;
goto out;
}
mutex_lock(&ctx->kdamond_lock);
if (ctx->kdamond) {
ret = -EBUSY;
goto unlock_out;
}
ret = damon_set_attrs(ctx, &attrs);
if (!ret)
ret = count;
mm/damon: implement a debugfs-based user space interface DAMON is designed to be used by kernel space code such as the memory management subsystems, and therefore it provides only kernel space API. That said, letting the user space control DAMON could provide some benefits to them. For example, it will allow user space to analyze their specific workloads and make their own special optimizations. For such cases, this commit implements a simple DAMON application kernel module, namely 'damon-dbgfs', which merely wraps the DAMON api and exports those to the user space via the debugfs. 'damon-dbgfs' exports three files, ``attrs``, ``target_ids``, and ``monitor_on`` under its debugfs directory, ``<debugfs>/damon/``. Attributes ---------- Users can read and write the ``sampling interval``, ``aggregation interval``, ``regions update interval``, and min/max number of monitoring target regions by reading from and writing to the ``attrs`` file. For example, below commands set those values to 5 ms, 100 ms, 1,000 ms, 10, 1000 and check it again:: # cd <debugfs>/damon # echo 5000 100000 1000000 10 1000 > attrs # cat attrs 5000 100000 1000000 10 1000 Target IDs ---------- Some types of address spaces supports multiple monitoring target. For example, the virtual memory address spaces monitoring can have multiple processes as the monitoring targets. Users can set the targets by writing relevant id values of the targets to, and get the ids of the current targets by reading from the ``target_ids`` file. In case of the virtual address spaces monitoring, the values should be pids of the monitoring target processes. For example, below commands set processes having pids 42 and 4242 as the monitoring targets and check it again:: # cd <debugfs>/damon # echo 42 4242 > target_ids # cat target_ids 42 4242 Note that setting the target ids doesn't start the monitoring. Turning On/Off -------------- Setting the files as described above doesn't incur effect unless you explicitly start the monitoring. You can start, stop, and check the current status of the monitoring by writing to and reading from the ``monitor_on`` file. Writing ``on`` to the file starts the monitoring of the targets with the attributes. Writing ``off`` to the file stops those. DAMON also stops if every targets are invalidated (in case of the virtual memory monitoring, target processes are invalidated when terminated). Below example commands turn on, off, and check the status of DAMON:: # cd <debugfs>/damon # echo on > monitor_on # echo off > monitor_on # cat monitor_on off Please note that you cannot write to the above-mentioned debugfs files while the monitoring is turned on. If you write to the files while DAMON is running, an error code such as ``-EBUSY`` will be returned. [akpm@linux-foundation.org: remove unneeded "alloc failed" printks] [akpm@linux-foundation.org: replace macro with static inline] Link: https://lkml.kernel.org/r/20210716081449.22187-8-sj38.park@gmail.com Signed-off-by: SeongJae Park <sjpark@amazon.de> Reviewed-by: Leonard Foerster <foersleo@amazon.de> Reviewed-by: Fernand Sieber <sieberf@amazon.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Amit Shah <amit@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Brendan Higgins <brendanhiggins@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: David Woodhouse <dwmw@amazon.com> Cc: Fan Du <fan.du@intel.com> Cc: Greg Kroah-Hartman <greg@kroah.com> Cc: Greg Thelen <gthelen@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joe Perches <joe@perches.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Marco Elver <elver@google.com> Cc: Markus Boehme <markubo@amazon.de> Cc: Maximilian Heyne <mheyne@amazon.de> Cc: Mel Gorman <mgorman@suse.de> Cc: Minchan Kim <minchan@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@surriel.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-08 02:56:53 +00:00
unlock_out:
mutex_unlock(&ctx->kdamond_lock);
out:
kfree(kbuf);
return ret;
}
mm/damon/dbgfs: add and use mappings between 'schemes' action inputs and 'damos_action' values Patch series "Extend DAMOS for Proactive LRU-lists Sorting". Introduction ============ In short, this patchset 1) extends DAMON-based Operation Schemes (DAMOS) for low overhead data access pattern based LRU-lists sorting, and 2) implements a static kernel module for easy use of conservatively-tuned version of that using the extended DAMOS capability. Background ---------- As page-granularity access checking overhead could be significant on huge systems, LRU lists are normally not proactively sorted but partially and reactively sorted for special events including specific user requests, system calls and memory pressure. As a result, LRU lists are sometimes not so perfectly prepared to be used as a trustworthy access pattern source for some situations including reclamation target pages selection under sudden memory pressure. DAMON-based Proactive LRU-lists Sorting --------------------------------------- Because DAMON can identify access patterns of best-effort accuracy while inducing only user-specified range of overhead, using DAMON for Proactive LRU-lists Sorting (PLRUS) could be helpful for this situation. The idea is quite simple. Find hot pages and cold pages using DAMON, and prioritize hot pages while deprioritizing cold pages on their LRU-lists. This patchset extends DAMON to support such schemes by introducing a couple of new DAMOS actions for prioritizing and deprioritizing memory regions of specific access patterns on their LRU-lists. In detail, this patchset simply uses 'mark_page_accessed()' and 'deactivate_page()' functions for prioritization and deprioritization of pages on their LRU lists, respectively. To make the scheme easy to use without complex tuning for common situations, this patchset further implements a static kernel module called 'DAMON_LRU_SORT' using the extended DAMOS functionality. It proactively sorts LRU-lists using DAMON with conservatively chosen default hotness/coldness thresholds and small CPU usage quota limit. That is, the module under its default parameters will make no harm for common situation but provide some level of benefit for systems having clear hot/cold access pattern under only memory pressure while consuming only limited small portion of CPU time. Related Works ------------- Proactive reclamation is well known to be helpful for reducing non-optimal reclamation target selection caused performance drops. However, proactive reclamation is not a best option for some cases, because it could incur additional I/O. For an example, it could be prohitive for systems using storage devices that total number of writes is limited, or cloud block storages that charges every I/O. Some proactive reclamation approaches[1,2] induce a level of memory pressure using memcg files or swappiness while monitoring PSI. As reclamation target selection is still relying on the original LRU-lists mechanism, using DAMON-based proactive reclamation before inducing the proactive reclamation could allow more memory saving with same level of performance overhead, or less performance overhead with same level of memory saving. [1] https://blogs.oracle.com/linux/post/anticipating-your-memory-needs [2] https://www.pdl.cmu.edu/ftp/NVM/tmo_asplos22.pdf Evaluation ========== In short, PLRUS achieves 10% memory PSI (some) reduction, 14% major page faults reduction, and 3.74% speedup under memory pressure. Setup ----- To show the effect of PLRUS, I run PARSEC3 and SPLASH-2X benchmarks under below variant systems and measure a few metrics including the runtime of each workload, number of system-wide major page faults, and system-wide memory PSI (some). - orig: v5.18-rc4 based mm-unstable kernel + this patchset, but no DAMON scheme applied. - mprs: Same to 'orig' but artificial memory pressure is induced. - plrus: Same to 'mprs' but a radically tuned PLRUS scheme is applied to the entire physical address space of the system. For the artificial memory pressure, I set 'memory.limit_in_bytes' to 75% of the running workload's peak RSS, wait 1 second, remove the pressure by setting it to 200% of the peak RSS, wait 10 seconds, and repeat the procedure until the workload finishes[1]. I use zram based swap device. The tests are automated[2]. [1] https://github.com/awslabs/damon-tests/blob/next/perf/runners/back/0009_memcg_pressure.sh [2] https://github.com/awslabs/damon-tests/blob/next/perf/full_once_config.sh Radically Tuned PLRUS --------------------- To show effect of PLRUS on the PARSEC3/SPLASH-2X workloads which runs for no long time, we use radically tuned version of PLRUS. The version asks DAMON to do the proactive LRU-lists sorting as below. 1. Find any memory regions shown some accesses (approximately >=20 accesses per 100 sampling) and prioritize pages of the regions on their LRU lists using up to 2% CPU time. Under the CPU time limit, prioritize regions having higher access frequency and kept the access frequency longer first. 2. Find any memory regions shown no access for at least >=5 seconds and deprioritize pages of the rgions on their LRU lists using up to 2% CPU time. Under the CPU time limit, deprioritize regions that not accessed for longer time first. Results ------- I repeat the tests 25 times and calculate average of the measured numbers. The results are as below: metric orig mprs plrus plrus/mprs runtime_seconds 190.06 292.83 281.87 0.96 pgmajfaults 852.55 8769420.00 7525040.00 0.86 memory_psi_some_us 106911.00 6943420.00 6220920.00 0.90 The first row is for legend. The first cell shows the metric that the following cells of the row shows. Second, third, and fourth cells show the metrics under the configs shown at the first row of the cell, and the fifth cell shows the metric under 'plrus' divided by the metric under 'mprs'. Second row shows the averaged runtime of the workloads in seconds. Third row shows the number of system-wide major page faults while the test was ongoing. Fourth row shows the system-wide memory pressure stall for some processes in microseconds while the test was ongoing. In short, PLRUS achieves 10% memory PSI (some) reduction, 14% major page faults reduction, and 3.74% speedup under memory pressure. We also confirmed the CPU usage of kdamond was 2.61% of single CPU, which is below 4% as expected. Sequence of Patches =================== The first and second patch cleans up DAMON debugfs interface and DAMOS_PAGEOUT handling code of physical address space monitoring operations implementation for easier extension of the code. The thrid and fourth patches implement a new DAMOS action called 'lru_prio', which prioritizes pages under memory regions which have a user-specified access pattern, and document it, respectively. The fifth and sixth patches implement yet another new DAMOS action called 'lru_deprio', which deprioritizes pages under memory regions which have a user-specified access pattern, and document it, respectively. The seventh patch implements a static kernel module called 'damon_lru_sort', which utilizes the DAMON-based proactive LRU-lists sorting under conservatively chosen default parameter. Finally, the eighth patch documents 'damon_lru_sort'. This patch (of 8): DAMON debugfs interface assumes users will write 'damos_action' value directly to the 'schemes' file. This makes adding new 'damos_action' in the middle of its definition breaks the backward compatibility of DAMON debugfs interface, as values of some 'damos_action' could be changed. To mitigate the situation, this commit adds mappings between the user inputs and 'damos_action' value and makes DAMON debugfs code uses those. Link: https://lkml.kernel.org/r/20220613192301.8817-1-sj@kernel.org Link: https://lkml.kernel.org/r/20220613192301.8817-2-sj@kernel.org Signed-off-by: SeongJae Park <sj@kernel.org> Cc: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-06-13 19:22:53 +00:00
/*
* Return corresponding dbgfs' scheme action value (int) for the given
* damos_action if the given damos_action value is valid and supported by
* dbgfs, negative error code otherwise.
*/
static int damos_action_to_dbgfs_scheme_action(enum damos_action action)
{
switch (action) {
case DAMOS_WILLNEED:
return 0;
case DAMOS_COLD:
return 1;
case DAMOS_PAGEOUT:
return 2;
case DAMOS_HUGEPAGE:
return 3;
case DAMOS_NOHUGEPAGE:
return 4;
case DAMOS_STAT:
return 5;
default:
return -EINVAL;
}
}
static ssize_t sprint_schemes(struct damon_ctx *c, char *buf, ssize_t len)
{
struct damos *s;
int written = 0;
int rc;
damon_for_each_scheme(s, c) {
rc = scnprintf(&buf[written], len - written,
"%lu %lu %u %u %u %u %d %lu %lu %lu %u %u %u %d %lu %lu %lu %lu %lu %lu %lu %lu %lu\n",
s->pattern.min_sz_region,
s->pattern.max_sz_region,
s->pattern.min_nr_accesses,
s->pattern.max_nr_accesses,
s->pattern.min_age_region,
s->pattern.max_age_region,
mm/damon/dbgfs: add and use mappings between 'schemes' action inputs and 'damos_action' values Patch series "Extend DAMOS for Proactive LRU-lists Sorting". Introduction ============ In short, this patchset 1) extends DAMON-based Operation Schemes (DAMOS) for low overhead data access pattern based LRU-lists sorting, and 2) implements a static kernel module for easy use of conservatively-tuned version of that using the extended DAMOS capability. Background ---------- As page-granularity access checking overhead could be significant on huge systems, LRU lists are normally not proactively sorted but partially and reactively sorted for special events including specific user requests, system calls and memory pressure. As a result, LRU lists are sometimes not so perfectly prepared to be used as a trustworthy access pattern source for some situations including reclamation target pages selection under sudden memory pressure. DAMON-based Proactive LRU-lists Sorting --------------------------------------- Because DAMON can identify access patterns of best-effort accuracy while inducing only user-specified range of overhead, using DAMON for Proactive LRU-lists Sorting (PLRUS) could be helpful for this situation. The idea is quite simple. Find hot pages and cold pages using DAMON, and prioritize hot pages while deprioritizing cold pages on their LRU-lists. This patchset extends DAMON to support such schemes by introducing a couple of new DAMOS actions for prioritizing and deprioritizing memory regions of specific access patterns on their LRU-lists. In detail, this patchset simply uses 'mark_page_accessed()' and 'deactivate_page()' functions for prioritization and deprioritization of pages on their LRU lists, respectively. To make the scheme easy to use without complex tuning for common situations, this patchset further implements a static kernel module called 'DAMON_LRU_SORT' using the extended DAMOS functionality. It proactively sorts LRU-lists using DAMON with conservatively chosen default hotness/coldness thresholds and small CPU usage quota limit. That is, the module under its default parameters will make no harm for common situation but provide some level of benefit for systems having clear hot/cold access pattern under only memory pressure while consuming only limited small portion of CPU time. Related Works ------------- Proactive reclamation is well known to be helpful for reducing non-optimal reclamation target selection caused performance drops. However, proactive reclamation is not a best option for some cases, because it could incur additional I/O. For an example, it could be prohitive for systems using storage devices that total number of writes is limited, or cloud block storages that charges every I/O. Some proactive reclamation approaches[1,2] induce a level of memory pressure using memcg files or swappiness while monitoring PSI. As reclamation target selection is still relying on the original LRU-lists mechanism, using DAMON-based proactive reclamation before inducing the proactive reclamation could allow more memory saving with same level of performance overhead, or less performance overhead with same level of memory saving. [1] https://blogs.oracle.com/linux/post/anticipating-your-memory-needs [2] https://www.pdl.cmu.edu/ftp/NVM/tmo_asplos22.pdf Evaluation ========== In short, PLRUS achieves 10% memory PSI (some) reduction, 14% major page faults reduction, and 3.74% speedup under memory pressure. Setup ----- To show the effect of PLRUS, I run PARSEC3 and SPLASH-2X benchmarks under below variant systems and measure a few metrics including the runtime of each workload, number of system-wide major page faults, and system-wide memory PSI (some). - orig: v5.18-rc4 based mm-unstable kernel + this patchset, but no DAMON scheme applied. - mprs: Same to 'orig' but artificial memory pressure is induced. - plrus: Same to 'mprs' but a radically tuned PLRUS scheme is applied to the entire physical address space of the system. For the artificial memory pressure, I set 'memory.limit_in_bytes' to 75% of the running workload's peak RSS, wait 1 second, remove the pressure by setting it to 200% of the peak RSS, wait 10 seconds, and repeat the procedure until the workload finishes[1]. I use zram based swap device. The tests are automated[2]. [1] https://github.com/awslabs/damon-tests/blob/next/perf/runners/back/0009_memcg_pressure.sh [2] https://github.com/awslabs/damon-tests/blob/next/perf/full_once_config.sh Radically Tuned PLRUS --------------------- To show effect of PLRUS on the PARSEC3/SPLASH-2X workloads which runs for no long time, we use radically tuned version of PLRUS. The version asks DAMON to do the proactive LRU-lists sorting as below. 1. Find any memory regions shown some accesses (approximately >=20 accesses per 100 sampling) and prioritize pages of the regions on their LRU lists using up to 2% CPU time. Under the CPU time limit, prioritize regions having higher access frequency and kept the access frequency longer first. 2. Find any memory regions shown no access for at least >=5 seconds and deprioritize pages of the rgions on their LRU lists using up to 2% CPU time. Under the CPU time limit, deprioritize regions that not accessed for longer time first. Results ------- I repeat the tests 25 times and calculate average of the measured numbers. The results are as below: metric orig mprs plrus plrus/mprs runtime_seconds 190.06 292.83 281.87 0.96 pgmajfaults 852.55 8769420.00 7525040.00 0.86 memory_psi_some_us 106911.00 6943420.00 6220920.00 0.90 The first row is for legend. The first cell shows the metric that the following cells of the row shows. Second, third, and fourth cells show the metrics under the configs shown at the first row of the cell, and the fifth cell shows the metric under 'plrus' divided by the metric under 'mprs'. Second row shows the averaged runtime of the workloads in seconds. Third row shows the number of system-wide major page faults while the test was ongoing. Fourth row shows the system-wide memory pressure stall for some processes in microseconds while the test was ongoing. In short, PLRUS achieves 10% memory PSI (some) reduction, 14% major page faults reduction, and 3.74% speedup under memory pressure. We also confirmed the CPU usage of kdamond was 2.61% of single CPU, which is below 4% as expected. Sequence of Patches =================== The first and second patch cleans up DAMON debugfs interface and DAMOS_PAGEOUT handling code of physical address space monitoring operations implementation for easier extension of the code. The thrid and fourth patches implement a new DAMOS action called 'lru_prio', which prioritizes pages under memory regions which have a user-specified access pattern, and document it, respectively. The fifth and sixth patches implement yet another new DAMOS action called 'lru_deprio', which deprioritizes pages under memory regions which have a user-specified access pattern, and document it, respectively. The seventh patch implements a static kernel module called 'damon_lru_sort', which utilizes the DAMON-based proactive LRU-lists sorting under conservatively chosen default parameter. Finally, the eighth patch documents 'damon_lru_sort'. This patch (of 8): DAMON debugfs interface assumes users will write 'damos_action' value directly to the 'schemes' file. This makes adding new 'damos_action' in the middle of its definition breaks the backward compatibility of DAMON debugfs interface, as values of some 'damos_action' could be changed. To mitigate the situation, this commit adds mappings between the user inputs and 'damos_action' value and makes DAMON debugfs code uses those. Link: https://lkml.kernel.org/r/20220613192301.8817-1-sj@kernel.org Link: https://lkml.kernel.org/r/20220613192301.8817-2-sj@kernel.org Signed-off-by: SeongJae Park <sj@kernel.org> Cc: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-06-13 19:22:53 +00:00
damos_action_to_dbgfs_scheme_action(s->action),
s->quota.ms, s->quota.sz,
s->quota.reset_interval,
s->quota.weight_sz,
s->quota.weight_nr_accesses,
s->quota.weight_age,
s->wmarks.metric, s->wmarks.interval,
s->wmarks.high, s->wmarks.mid, s->wmarks.low,
s->stat.nr_tried, s->stat.sz_tried,
s->stat.nr_applied, s->stat.sz_applied,
s->stat.qt_exceeds);
if (!rc)
return -ENOMEM;
written += rc;
}
return written;
}
static ssize_t dbgfs_schemes_read(struct file *file, char __user *buf,
size_t count, loff_t *ppos)
{
struct damon_ctx *ctx = file->private_data;
char *kbuf;
ssize_t len;
kbuf = kmalloc(count, GFP_KERNEL | __GFP_NOWARN);
if (!kbuf)
return -ENOMEM;
mutex_lock(&ctx->kdamond_lock);
len = sprint_schemes(ctx, kbuf, count);
mutex_unlock(&ctx->kdamond_lock);
if (len < 0)
goto out;
len = simple_read_from_buffer(buf, count, ppos, kbuf, len);
out:
kfree(kbuf);
return len;
}
static void free_schemes_arr(struct damos **schemes, ssize_t nr_schemes)
{
ssize_t i;
for (i = 0; i < nr_schemes; i++)
kfree(schemes[i]);
kfree(schemes);
}
mm/damon/dbgfs: add and use mappings between 'schemes' action inputs and 'damos_action' values Patch series "Extend DAMOS for Proactive LRU-lists Sorting". Introduction ============ In short, this patchset 1) extends DAMON-based Operation Schemes (DAMOS) for low overhead data access pattern based LRU-lists sorting, and 2) implements a static kernel module for easy use of conservatively-tuned version of that using the extended DAMOS capability. Background ---------- As page-granularity access checking overhead could be significant on huge systems, LRU lists are normally not proactively sorted but partially and reactively sorted for special events including specific user requests, system calls and memory pressure. As a result, LRU lists are sometimes not so perfectly prepared to be used as a trustworthy access pattern source for some situations including reclamation target pages selection under sudden memory pressure. DAMON-based Proactive LRU-lists Sorting --------------------------------------- Because DAMON can identify access patterns of best-effort accuracy while inducing only user-specified range of overhead, using DAMON for Proactive LRU-lists Sorting (PLRUS) could be helpful for this situation. The idea is quite simple. Find hot pages and cold pages using DAMON, and prioritize hot pages while deprioritizing cold pages on their LRU-lists. This patchset extends DAMON to support such schemes by introducing a couple of new DAMOS actions for prioritizing and deprioritizing memory regions of specific access patterns on their LRU-lists. In detail, this patchset simply uses 'mark_page_accessed()' and 'deactivate_page()' functions for prioritization and deprioritization of pages on their LRU lists, respectively. To make the scheme easy to use without complex tuning for common situations, this patchset further implements a static kernel module called 'DAMON_LRU_SORT' using the extended DAMOS functionality. It proactively sorts LRU-lists using DAMON with conservatively chosen default hotness/coldness thresholds and small CPU usage quota limit. That is, the module under its default parameters will make no harm for common situation but provide some level of benefit for systems having clear hot/cold access pattern under only memory pressure while consuming only limited small portion of CPU time. Related Works ------------- Proactive reclamation is well known to be helpful for reducing non-optimal reclamation target selection caused performance drops. However, proactive reclamation is not a best option for some cases, because it could incur additional I/O. For an example, it could be prohitive for systems using storage devices that total number of writes is limited, or cloud block storages that charges every I/O. Some proactive reclamation approaches[1,2] induce a level of memory pressure using memcg files or swappiness while monitoring PSI. As reclamation target selection is still relying on the original LRU-lists mechanism, using DAMON-based proactive reclamation before inducing the proactive reclamation could allow more memory saving with same level of performance overhead, or less performance overhead with same level of memory saving. [1] https://blogs.oracle.com/linux/post/anticipating-your-memory-needs [2] https://www.pdl.cmu.edu/ftp/NVM/tmo_asplos22.pdf Evaluation ========== In short, PLRUS achieves 10% memory PSI (some) reduction, 14% major page faults reduction, and 3.74% speedup under memory pressure. Setup ----- To show the effect of PLRUS, I run PARSEC3 and SPLASH-2X benchmarks under below variant systems and measure a few metrics including the runtime of each workload, number of system-wide major page faults, and system-wide memory PSI (some). - orig: v5.18-rc4 based mm-unstable kernel + this patchset, but no DAMON scheme applied. - mprs: Same to 'orig' but artificial memory pressure is induced. - plrus: Same to 'mprs' but a radically tuned PLRUS scheme is applied to the entire physical address space of the system. For the artificial memory pressure, I set 'memory.limit_in_bytes' to 75% of the running workload's peak RSS, wait 1 second, remove the pressure by setting it to 200% of the peak RSS, wait 10 seconds, and repeat the procedure until the workload finishes[1]. I use zram based swap device. The tests are automated[2]. [1] https://github.com/awslabs/damon-tests/blob/next/perf/runners/back/0009_memcg_pressure.sh [2] https://github.com/awslabs/damon-tests/blob/next/perf/full_once_config.sh Radically Tuned PLRUS --------------------- To show effect of PLRUS on the PARSEC3/SPLASH-2X workloads which runs for no long time, we use radically tuned version of PLRUS. The version asks DAMON to do the proactive LRU-lists sorting as below. 1. Find any memory regions shown some accesses (approximately >=20 accesses per 100 sampling) and prioritize pages of the regions on their LRU lists using up to 2% CPU time. Under the CPU time limit, prioritize regions having higher access frequency and kept the access frequency longer first. 2. Find any memory regions shown no access for at least >=5 seconds and deprioritize pages of the rgions on their LRU lists using up to 2% CPU time. Under the CPU time limit, deprioritize regions that not accessed for longer time first. Results ------- I repeat the tests 25 times and calculate average of the measured numbers. The results are as below: metric orig mprs plrus plrus/mprs runtime_seconds 190.06 292.83 281.87 0.96 pgmajfaults 852.55 8769420.00 7525040.00 0.86 memory_psi_some_us 106911.00 6943420.00 6220920.00 0.90 The first row is for legend. The first cell shows the metric that the following cells of the row shows. Second, third, and fourth cells show the metrics under the configs shown at the first row of the cell, and the fifth cell shows the metric under 'plrus' divided by the metric under 'mprs'. Second row shows the averaged runtime of the workloads in seconds. Third row shows the number of system-wide major page faults while the test was ongoing. Fourth row shows the system-wide memory pressure stall for some processes in microseconds while the test was ongoing. In short, PLRUS achieves 10% memory PSI (some) reduction, 14% major page faults reduction, and 3.74% speedup under memory pressure. We also confirmed the CPU usage of kdamond was 2.61% of single CPU, which is below 4% as expected. Sequence of Patches =================== The first and second patch cleans up DAMON debugfs interface and DAMOS_PAGEOUT handling code of physical address space monitoring operations implementation for easier extension of the code. The thrid and fourth patches implement a new DAMOS action called 'lru_prio', which prioritizes pages under memory regions which have a user-specified access pattern, and document it, respectively. The fifth and sixth patches implement yet another new DAMOS action called 'lru_deprio', which deprioritizes pages under memory regions which have a user-specified access pattern, and document it, respectively. The seventh patch implements a static kernel module called 'damon_lru_sort', which utilizes the DAMON-based proactive LRU-lists sorting under conservatively chosen default parameter. Finally, the eighth patch documents 'damon_lru_sort'. This patch (of 8): DAMON debugfs interface assumes users will write 'damos_action' value directly to the 'schemes' file. This makes adding new 'damos_action' in the middle of its definition breaks the backward compatibility of DAMON debugfs interface, as values of some 'damos_action' could be changed. To mitigate the situation, this commit adds mappings between the user inputs and 'damos_action' value and makes DAMON debugfs code uses those. Link: https://lkml.kernel.org/r/20220613192301.8817-1-sj@kernel.org Link: https://lkml.kernel.org/r/20220613192301.8817-2-sj@kernel.org Signed-off-by: SeongJae Park <sj@kernel.org> Cc: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-06-13 19:22:53 +00:00
/*
* Return corresponding damos_action for the given dbgfs input for a scheme
* action if the input is valid, negative error code otherwise.
*/
static enum damos_action dbgfs_scheme_action_to_damos_action(int dbgfs_action)
{
mm/damon/dbgfs: add and use mappings between 'schemes' action inputs and 'damos_action' values Patch series "Extend DAMOS for Proactive LRU-lists Sorting". Introduction ============ In short, this patchset 1) extends DAMON-based Operation Schemes (DAMOS) for low overhead data access pattern based LRU-lists sorting, and 2) implements a static kernel module for easy use of conservatively-tuned version of that using the extended DAMOS capability. Background ---------- As page-granularity access checking overhead could be significant on huge systems, LRU lists are normally not proactively sorted but partially and reactively sorted for special events including specific user requests, system calls and memory pressure. As a result, LRU lists are sometimes not so perfectly prepared to be used as a trustworthy access pattern source for some situations including reclamation target pages selection under sudden memory pressure. DAMON-based Proactive LRU-lists Sorting --------------------------------------- Because DAMON can identify access patterns of best-effort accuracy while inducing only user-specified range of overhead, using DAMON for Proactive LRU-lists Sorting (PLRUS) could be helpful for this situation. The idea is quite simple. Find hot pages and cold pages using DAMON, and prioritize hot pages while deprioritizing cold pages on their LRU-lists. This patchset extends DAMON to support such schemes by introducing a couple of new DAMOS actions for prioritizing and deprioritizing memory regions of specific access patterns on their LRU-lists. In detail, this patchset simply uses 'mark_page_accessed()' and 'deactivate_page()' functions for prioritization and deprioritization of pages on their LRU lists, respectively. To make the scheme easy to use without complex tuning for common situations, this patchset further implements a static kernel module called 'DAMON_LRU_SORT' using the extended DAMOS functionality. It proactively sorts LRU-lists using DAMON with conservatively chosen default hotness/coldness thresholds and small CPU usage quota limit. That is, the module under its default parameters will make no harm for common situation but provide some level of benefit for systems having clear hot/cold access pattern under only memory pressure while consuming only limited small portion of CPU time. Related Works ------------- Proactive reclamation is well known to be helpful for reducing non-optimal reclamation target selection caused performance drops. However, proactive reclamation is not a best option for some cases, because it could incur additional I/O. For an example, it could be prohitive for systems using storage devices that total number of writes is limited, or cloud block storages that charges every I/O. Some proactive reclamation approaches[1,2] induce a level of memory pressure using memcg files or swappiness while monitoring PSI. As reclamation target selection is still relying on the original LRU-lists mechanism, using DAMON-based proactive reclamation before inducing the proactive reclamation could allow more memory saving with same level of performance overhead, or less performance overhead with same level of memory saving. [1] https://blogs.oracle.com/linux/post/anticipating-your-memory-needs [2] https://www.pdl.cmu.edu/ftp/NVM/tmo_asplos22.pdf Evaluation ========== In short, PLRUS achieves 10% memory PSI (some) reduction, 14% major page faults reduction, and 3.74% speedup under memory pressure. Setup ----- To show the effect of PLRUS, I run PARSEC3 and SPLASH-2X benchmarks under below variant systems and measure a few metrics including the runtime of each workload, number of system-wide major page faults, and system-wide memory PSI (some). - orig: v5.18-rc4 based mm-unstable kernel + this patchset, but no DAMON scheme applied. - mprs: Same to 'orig' but artificial memory pressure is induced. - plrus: Same to 'mprs' but a radically tuned PLRUS scheme is applied to the entire physical address space of the system. For the artificial memory pressure, I set 'memory.limit_in_bytes' to 75% of the running workload's peak RSS, wait 1 second, remove the pressure by setting it to 200% of the peak RSS, wait 10 seconds, and repeat the procedure until the workload finishes[1]. I use zram based swap device. The tests are automated[2]. [1] https://github.com/awslabs/damon-tests/blob/next/perf/runners/back/0009_memcg_pressure.sh [2] https://github.com/awslabs/damon-tests/blob/next/perf/full_once_config.sh Radically Tuned PLRUS --------------------- To show effect of PLRUS on the PARSEC3/SPLASH-2X workloads which runs for no long time, we use radically tuned version of PLRUS. The version asks DAMON to do the proactive LRU-lists sorting as below. 1. Find any memory regions shown some accesses (approximately >=20 accesses per 100 sampling) and prioritize pages of the regions on their LRU lists using up to 2% CPU time. Under the CPU time limit, prioritize regions having higher access frequency and kept the access frequency longer first. 2. Find any memory regions shown no access for at least >=5 seconds and deprioritize pages of the rgions on their LRU lists using up to 2% CPU time. Under the CPU time limit, deprioritize regions that not accessed for longer time first. Results ------- I repeat the tests 25 times and calculate average of the measured numbers. The results are as below: metric orig mprs plrus plrus/mprs runtime_seconds 190.06 292.83 281.87 0.96 pgmajfaults 852.55 8769420.00 7525040.00 0.86 memory_psi_some_us 106911.00 6943420.00 6220920.00 0.90 The first row is for legend. The first cell shows the metric that the following cells of the row shows. Second, third, and fourth cells show the metrics under the configs shown at the first row of the cell, and the fifth cell shows the metric under 'plrus' divided by the metric under 'mprs'. Second row shows the averaged runtime of the workloads in seconds. Third row shows the number of system-wide major page faults while the test was ongoing. Fourth row shows the system-wide memory pressure stall for some processes in microseconds while the test was ongoing. In short, PLRUS achieves 10% memory PSI (some) reduction, 14% major page faults reduction, and 3.74% speedup under memory pressure. We also confirmed the CPU usage of kdamond was 2.61% of single CPU, which is below 4% as expected. Sequence of Patches =================== The first and second patch cleans up DAMON debugfs interface and DAMOS_PAGEOUT handling code of physical address space monitoring operations implementation for easier extension of the code. The thrid and fourth patches implement a new DAMOS action called 'lru_prio', which prioritizes pages under memory regions which have a user-specified access pattern, and document it, respectively. The fifth and sixth patches implement yet another new DAMOS action called 'lru_deprio', which deprioritizes pages under memory regions which have a user-specified access pattern, and document it, respectively. The seventh patch implements a static kernel module called 'damon_lru_sort', which utilizes the DAMON-based proactive LRU-lists sorting under conservatively chosen default parameter. Finally, the eighth patch documents 'damon_lru_sort'. This patch (of 8): DAMON debugfs interface assumes users will write 'damos_action' value directly to the 'schemes' file. This makes adding new 'damos_action' in the middle of its definition breaks the backward compatibility of DAMON debugfs interface, as values of some 'damos_action' could be changed. To mitigate the situation, this commit adds mappings between the user inputs and 'damos_action' value and makes DAMON debugfs code uses those. Link: https://lkml.kernel.org/r/20220613192301.8817-1-sj@kernel.org Link: https://lkml.kernel.org/r/20220613192301.8817-2-sj@kernel.org Signed-off-by: SeongJae Park <sj@kernel.org> Cc: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-06-13 19:22:53 +00:00
switch (dbgfs_action) {
case 0:
return DAMOS_WILLNEED;
case 1:
return DAMOS_COLD;
case 2:
return DAMOS_PAGEOUT;
case 3:
return DAMOS_HUGEPAGE;
case 4:
return DAMOS_NOHUGEPAGE;
case 5:
return DAMOS_STAT;
default:
mm/damon/dbgfs: add and use mappings between 'schemes' action inputs and 'damos_action' values Patch series "Extend DAMOS for Proactive LRU-lists Sorting". Introduction ============ In short, this patchset 1) extends DAMON-based Operation Schemes (DAMOS) for low overhead data access pattern based LRU-lists sorting, and 2) implements a static kernel module for easy use of conservatively-tuned version of that using the extended DAMOS capability. Background ---------- As page-granularity access checking overhead could be significant on huge systems, LRU lists are normally not proactively sorted but partially and reactively sorted for special events including specific user requests, system calls and memory pressure. As a result, LRU lists are sometimes not so perfectly prepared to be used as a trustworthy access pattern source for some situations including reclamation target pages selection under sudden memory pressure. DAMON-based Proactive LRU-lists Sorting --------------------------------------- Because DAMON can identify access patterns of best-effort accuracy while inducing only user-specified range of overhead, using DAMON for Proactive LRU-lists Sorting (PLRUS) could be helpful for this situation. The idea is quite simple. Find hot pages and cold pages using DAMON, and prioritize hot pages while deprioritizing cold pages on their LRU-lists. This patchset extends DAMON to support such schemes by introducing a couple of new DAMOS actions for prioritizing and deprioritizing memory regions of specific access patterns on their LRU-lists. In detail, this patchset simply uses 'mark_page_accessed()' and 'deactivate_page()' functions for prioritization and deprioritization of pages on their LRU lists, respectively. To make the scheme easy to use without complex tuning for common situations, this patchset further implements a static kernel module called 'DAMON_LRU_SORT' using the extended DAMOS functionality. It proactively sorts LRU-lists using DAMON with conservatively chosen default hotness/coldness thresholds and small CPU usage quota limit. That is, the module under its default parameters will make no harm for common situation but provide some level of benefit for systems having clear hot/cold access pattern under only memory pressure while consuming only limited small portion of CPU time. Related Works ------------- Proactive reclamation is well known to be helpful for reducing non-optimal reclamation target selection caused performance drops. However, proactive reclamation is not a best option for some cases, because it could incur additional I/O. For an example, it could be prohitive for systems using storage devices that total number of writes is limited, or cloud block storages that charges every I/O. Some proactive reclamation approaches[1,2] induce a level of memory pressure using memcg files or swappiness while monitoring PSI. As reclamation target selection is still relying on the original LRU-lists mechanism, using DAMON-based proactive reclamation before inducing the proactive reclamation could allow more memory saving with same level of performance overhead, or less performance overhead with same level of memory saving. [1] https://blogs.oracle.com/linux/post/anticipating-your-memory-needs [2] https://www.pdl.cmu.edu/ftp/NVM/tmo_asplos22.pdf Evaluation ========== In short, PLRUS achieves 10% memory PSI (some) reduction, 14% major page faults reduction, and 3.74% speedup under memory pressure. Setup ----- To show the effect of PLRUS, I run PARSEC3 and SPLASH-2X benchmarks under below variant systems and measure a few metrics including the runtime of each workload, number of system-wide major page faults, and system-wide memory PSI (some). - orig: v5.18-rc4 based mm-unstable kernel + this patchset, but no DAMON scheme applied. - mprs: Same to 'orig' but artificial memory pressure is induced. - plrus: Same to 'mprs' but a radically tuned PLRUS scheme is applied to the entire physical address space of the system. For the artificial memory pressure, I set 'memory.limit_in_bytes' to 75% of the running workload's peak RSS, wait 1 second, remove the pressure by setting it to 200% of the peak RSS, wait 10 seconds, and repeat the procedure until the workload finishes[1]. I use zram based swap device. The tests are automated[2]. [1] https://github.com/awslabs/damon-tests/blob/next/perf/runners/back/0009_memcg_pressure.sh [2] https://github.com/awslabs/damon-tests/blob/next/perf/full_once_config.sh Radically Tuned PLRUS --------------------- To show effect of PLRUS on the PARSEC3/SPLASH-2X workloads which runs for no long time, we use radically tuned version of PLRUS. The version asks DAMON to do the proactive LRU-lists sorting as below. 1. Find any memory regions shown some accesses (approximately >=20 accesses per 100 sampling) and prioritize pages of the regions on their LRU lists using up to 2% CPU time. Under the CPU time limit, prioritize regions having higher access frequency and kept the access frequency longer first. 2. Find any memory regions shown no access for at least >=5 seconds and deprioritize pages of the rgions on their LRU lists using up to 2% CPU time. Under the CPU time limit, deprioritize regions that not accessed for longer time first. Results ------- I repeat the tests 25 times and calculate average of the measured numbers. The results are as below: metric orig mprs plrus plrus/mprs runtime_seconds 190.06 292.83 281.87 0.96 pgmajfaults 852.55 8769420.00 7525040.00 0.86 memory_psi_some_us 106911.00 6943420.00 6220920.00 0.90 The first row is for legend. The first cell shows the metric that the following cells of the row shows. Second, third, and fourth cells show the metrics under the configs shown at the first row of the cell, and the fifth cell shows the metric under 'plrus' divided by the metric under 'mprs'. Second row shows the averaged runtime of the workloads in seconds. Third row shows the number of system-wide major page faults while the test was ongoing. Fourth row shows the system-wide memory pressure stall for some processes in microseconds while the test was ongoing. In short, PLRUS achieves 10% memory PSI (some) reduction, 14% major page faults reduction, and 3.74% speedup under memory pressure. We also confirmed the CPU usage of kdamond was 2.61% of single CPU, which is below 4% as expected. Sequence of Patches =================== The first and second patch cleans up DAMON debugfs interface and DAMOS_PAGEOUT handling code of physical address space monitoring operations implementation for easier extension of the code. The thrid and fourth patches implement a new DAMOS action called 'lru_prio', which prioritizes pages under memory regions which have a user-specified access pattern, and document it, respectively. The fifth and sixth patches implement yet another new DAMOS action called 'lru_deprio', which deprioritizes pages under memory regions which have a user-specified access pattern, and document it, respectively. The seventh patch implements a static kernel module called 'damon_lru_sort', which utilizes the DAMON-based proactive LRU-lists sorting under conservatively chosen default parameter. Finally, the eighth patch documents 'damon_lru_sort'. This patch (of 8): DAMON debugfs interface assumes users will write 'damos_action' value directly to the 'schemes' file. This makes adding new 'damos_action' in the middle of its definition breaks the backward compatibility of DAMON debugfs interface, as values of some 'damos_action' could be changed. To mitigate the situation, this commit adds mappings between the user inputs and 'damos_action' value and makes DAMON debugfs code uses those. Link: https://lkml.kernel.org/r/20220613192301.8817-1-sj@kernel.org Link: https://lkml.kernel.org/r/20220613192301.8817-2-sj@kernel.org Signed-off-by: SeongJae Park <sj@kernel.org> Cc: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-06-13 19:22:53 +00:00
return -EINVAL;
}
}
/*
* Converts a string into an array of struct damos pointers
*
* Returns an array of struct damos pointers that converted if the conversion
* success, or NULL otherwise.
*/
static struct damos **str_to_schemes(const char *str, ssize_t len,
ssize_t *nr_schemes)
{
struct damos *scheme, **schemes;
const int max_nr_schemes = 256;
int pos = 0, parsed, ret;
mm/damon/dbgfs: add and use mappings between 'schemes' action inputs and 'damos_action' values Patch series "Extend DAMOS for Proactive LRU-lists Sorting". Introduction ============ In short, this patchset 1) extends DAMON-based Operation Schemes (DAMOS) for low overhead data access pattern based LRU-lists sorting, and 2) implements a static kernel module for easy use of conservatively-tuned version of that using the extended DAMOS capability. Background ---------- As page-granularity access checking overhead could be significant on huge systems, LRU lists are normally not proactively sorted but partially and reactively sorted for special events including specific user requests, system calls and memory pressure. As a result, LRU lists are sometimes not so perfectly prepared to be used as a trustworthy access pattern source for some situations including reclamation target pages selection under sudden memory pressure. DAMON-based Proactive LRU-lists Sorting --------------------------------------- Because DAMON can identify access patterns of best-effort accuracy while inducing only user-specified range of overhead, using DAMON for Proactive LRU-lists Sorting (PLRUS) could be helpful for this situation. The idea is quite simple. Find hot pages and cold pages using DAMON, and prioritize hot pages while deprioritizing cold pages on their LRU-lists. This patchset extends DAMON to support such schemes by introducing a couple of new DAMOS actions for prioritizing and deprioritizing memory regions of specific access patterns on their LRU-lists. In detail, this patchset simply uses 'mark_page_accessed()' and 'deactivate_page()' functions for prioritization and deprioritization of pages on their LRU lists, respectively. To make the scheme easy to use without complex tuning for common situations, this patchset further implements a static kernel module called 'DAMON_LRU_SORT' using the extended DAMOS functionality. It proactively sorts LRU-lists using DAMON with conservatively chosen default hotness/coldness thresholds and small CPU usage quota limit. That is, the module under its default parameters will make no harm for common situation but provide some level of benefit for systems having clear hot/cold access pattern under only memory pressure while consuming only limited small portion of CPU time. Related Works ------------- Proactive reclamation is well known to be helpful for reducing non-optimal reclamation target selection caused performance drops. However, proactive reclamation is not a best option for some cases, because it could incur additional I/O. For an example, it could be prohitive for systems using storage devices that total number of writes is limited, or cloud block storages that charges every I/O. Some proactive reclamation approaches[1,2] induce a level of memory pressure using memcg files or swappiness while monitoring PSI. As reclamation target selection is still relying on the original LRU-lists mechanism, using DAMON-based proactive reclamation before inducing the proactive reclamation could allow more memory saving with same level of performance overhead, or less performance overhead with same level of memory saving. [1] https://blogs.oracle.com/linux/post/anticipating-your-memory-needs [2] https://www.pdl.cmu.edu/ftp/NVM/tmo_asplos22.pdf Evaluation ========== In short, PLRUS achieves 10% memory PSI (some) reduction, 14% major page faults reduction, and 3.74% speedup under memory pressure. Setup ----- To show the effect of PLRUS, I run PARSEC3 and SPLASH-2X benchmarks under below variant systems and measure a few metrics including the runtime of each workload, number of system-wide major page faults, and system-wide memory PSI (some). - orig: v5.18-rc4 based mm-unstable kernel + this patchset, but no DAMON scheme applied. - mprs: Same to 'orig' but artificial memory pressure is induced. - plrus: Same to 'mprs' but a radically tuned PLRUS scheme is applied to the entire physical address space of the system. For the artificial memory pressure, I set 'memory.limit_in_bytes' to 75% of the running workload's peak RSS, wait 1 second, remove the pressure by setting it to 200% of the peak RSS, wait 10 seconds, and repeat the procedure until the workload finishes[1]. I use zram based swap device. The tests are automated[2]. [1] https://github.com/awslabs/damon-tests/blob/next/perf/runners/back/0009_memcg_pressure.sh [2] https://github.com/awslabs/damon-tests/blob/next/perf/full_once_config.sh Radically Tuned PLRUS --------------------- To show effect of PLRUS on the PARSEC3/SPLASH-2X workloads which runs for no long time, we use radically tuned version of PLRUS. The version asks DAMON to do the proactive LRU-lists sorting as below. 1. Find any memory regions shown some accesses (approximately >=20 accesses per 100 sampling) and prioritize pages of the regions on their LRU lists using up to 2% CPU time. Under the CPU time limit, prioritize regions having higher access frequency and kept the access frequency longer first. 2. Find any memory regions shown no access for at least >=5 seconds and deprioritize pages of the rgions on their LRU lists using up to 2% CPU time. Under the CPU time limit, deprioritize regions that not accessed for longer time first. Results ------- I repeat the tests 25 times and calculate average of the measured numbers. The results are as below: metric orig mprs plrus plrus/mprs runtime_seconds 190.06 292.83 281.87 0.96 pgmajfaults 852.55 8769420.00 7525040.00 0.86 memory_psi_some_us 106911.00 6943420.00 6220920.00 0.90 The first row is for legend. The first cell shows the metric that the following cells of the row shows. Second, third, and fourth cells show the metrics under the configs shown at the first row of the cell, and the fifth cell shows the metric under 'plrus' divided by the metric under 'mprs'. Second row shows the averaged runtime of the workloads in seconds. Third row shows the number of system-wide major page faults while the test was ongoing. Fourth row shows the system-wide memory pressure stall for some processes in microseconds while the test was ongoing. In short, PLRUS achieves 10% memory PSI (some) reduction, 14% major page faults reduction, and 3.74% speedup under memory pressure. We also confirmed the CPU usage of kdamond was 2.61% of single CPU, which is below 4% as expected. Sequence of Patches =================== The first and second patch cleans up DAMON debugfs interface and DAMOS_PAGEOUT handling code of physical address space monitoring operations implementation for easier extension of the code. The thrid and fourth patches implement a new DAMOS action called 'lru_prio', which prioritizes pages under memory regions which have a user-specified access pattern, and document it, respectively. The fifth and sixth patches implement yet another new DAMOS action called 'lru_deprio', which deprioritizes pages under memory regions which have a user-specified access pattern, and document it, respectively. The seventh patch implements a static kernel module called 'damon_lru_sort', which utilizes the DAMON-based proactive LRU-lists sorting under conservatively chosen default parameter. Finally, the eighth patch documents 'damon_lru_sort'. This patch (of 8): DAMON debugfs interface assumes users will write 'damos_action' value directly to the 'schemes' file. This makes adding new 'damos_action' in the middle of its definition breaks the backward compatibility of DAMON debugfs interface, as values of some 'damos_action' could be changed. To mitigate the situation, this commit adds mappings between the user inputs and 'damos_action' value and makes DAMON debugfs code uses those. Link: https://lkml.kernel.org/r/20220613192301.8817-1-sj@kernel.org Link: https://lkml.kernel.org/r/20220613192301.8817-2-sj@kernel.org Signed-off-by: SeongJae Park <sj@kernel.org> Cc: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-06-13 19:22:53 +00:00
unsigned int action_input;
enum damos_action action;
schemes = kmalloc_array(max_nr_schemes, sizeof(scheme),
GFP_KERNEL);
if (!schemes)
return NULL;
*nr_schemes = 0;
while (pos < len && *nr_schemes < max_nr_schemes) {
struct damos_access_pattern pattern = {};
struct damos_quota quota = {};
struct damos_watermarks wmarks;
ret = sscanf(&str[pos],
"%lu %lu %u %u %u %u %u %lu %lu %lu %u %u %u %u %lu %lu %lu %lu%n",
&pattern.min_sz_region, &pattern.max_sz_region,
&pattern.min_nr_accesses,
&pattern.max_nr_accesses,
&pattern.min_age_region,
&pattern.max_age_region,
&action_input, &quota.ms,
&quota.sz, &quota.reset_interval,
&quota.weight_sz, &quota.weight_nr_accesses,
&quota.weight_age, &wmarks.metric,
&wmarks.interval, &wmarks.high, &wmarks.mid,
&wmarks.low, &parsed);
if (ret != 18)
break;
mm/damon/dbgfs: add and use mappings between 'schemes' action inputs and 'damos_action' values Patch series "Extend DAMOS for Proactive LRU-lists Sorting". Introduction ============ In short, this patchset 1) extends DAMON-based Operation Schemes (DAMOS) for low overhead data access pattern based LRU-lists sorting, and 2) implements a static kernel module for easy use of conservatively-tuned version of that using the extended DAMOS capability. Background ---------- As page-granularity access checking overhead could be significant on huge systems, LRU lists are normally not proactively sorted but partially and reactively sorted for special events including specific user requests, system calls and memory pressure. As a result, LRU lists are sometimes not so perfectly prepared to be used as a trustworthy access pattern source for some situations including reclamation target pages selection under sudden memory pressure. DAMON-based Proactive LRU-lists Sorting --------------------------------------- Because DAMON can identify access patterns of best-effort accuracy while inducing only user-specified range of overhead, using DAMON for Proactive LRU-lists Sorting (PLRUS) could be helpful for this situation. The idea is quite simple. Find hot pages and cold pages using DAMON, and prioritize hot pages while deprioritizing cold pages on their LRU-lists. This patchset extends DAMON to support such schemes by introducing a couple of new DAMOS actions for prioritizing and deprioritizing memory regions of specific access patterns on their LRU-lists. In detail, this patchset simply uses 'mark_page_accessed()' and 'deactivate_page()' functions for prioritization and deprioritization of pages on their LRU lists, respectively. To make the scheme easy to use without complex tuning for common situations, this patchset further implements a static kernel module called 'DAMON_LRU_SORT' using the extended DAMOS functionality. It proactively sorts LRU-lists using DAMON with conservatively chosen default hotness/coldness thresholds and small CPU usage quota limit. That is, the module under its default parameters will make no harm for common situation but provide some level of benefit for systems having clear hot/cold access pattern under only memory pressure while consuming only limited small portion of CPU time. Related Works ------------- Proactive reclamation is well known to be helpful for reducing non-optimal reclamation target selection caused performance drops. However, proactive reclamation is not a best option for some cases, because it could incur additional I/O. For an example, it could be prohitive for systems using storage devices that total number of writes is limited, or cloud block storages that charges every I/O. Some proactive reclamation approaches[1,2] induce a level of memory pressure using memcg files or swappiness while monitoring PSI. As reclamation target selection is still relying on the original LRU-lists mechanism, using DAMON-based proactive reclamation before inducing the proactive reclamation could allow more memory saving with same level of performance overhead, or less performance overhead with same level of memory saving. [1] https://blogs.oracle.com/linux/post/anticipating-your-memory-needs [2] https://www.pdl.cmu.edu/ftp/NVM/tmo_asplos22.pdf Evaluation ========== In short, PLRUS achieves 10% memory PSI (some) reduction, 14% major page faults reduction, and 3.74% speedup under memory pressure. Setup ----- To show the effect of PLRUS, I run PARSEC3 and SPLASH-2X benchmarks under below variant systems and measure a few metrics including the runtime of each workload, number of system-wide major page faults, and system-wide memory PSI (some). - orig: v5.18-rc4 based mm-unstable kernel + this patchset, but no DAMON scheme applied. - mprs: Same to 'orig' but artificial memory pressure is induced. - plrus: Same to 'mprs' but a radically tuned PLRUS scheme is applied to the entire physical address space of the system. For the artificial memory pressure, I set 'memory.limit_in_bytes' to 75% of the running workload's peak RSS, wait 1 second, remove the pressure by setting it to 200% of the peak RSS, wait 10 seconds, and repeat the procedure until the workload finishes[1]. I use zram based swap device. The tests are automated[2]. [1] https://github.com/awslabs/damon-tests/blob/next/perf/runners/back/0009_memcg_pressure.sh [2] https://github.com/awslabs/damon-tests/blob/next/perf/full_once_config.sh Radically Tuned PLRUS --------------------- To show effect of PLRUS on the PARSEC3/SPLASH-2X workloads which runs for no long time, we use radically tuned version of PLRUS. The version asks DAMON to do the proactive LRU-lists sorting as below. 1. Find any memory regions shown some accesses (approximately >=20 accesses per 100 sampling) and prioritize pages of the regions on their LRU lists using up to 2% CPU time. Under the CPU time limit, prioritize regions having higher access frequency and kept the access frequency longer first. 2. Find any memory regions shown no access for at least >=5 seconds and deprioritize pages of the rgions on their LRU lists using up to 2% CPU time. Under the CPU time limit, deprioritize regions that not accessed for longer time first. Results ------- I repeat the tests 25 times and calculate average of the measured numbers. The results are as below: metric orig mprs plrus plrus/mprs runtime_seconds 190.06 292.83 281.87 0.96 pgmajfaults 852.55 8769420.00 7525040.00 0.86 memory_psi_some_us 106911.00 6943420.00 6220920.00 0.90 The first row is for legend. The first cell shows the metric that the following cells of the row shows. Second, third, and fourth cells show the metrics under the configs shown at the first row of the cell, and the fifth cell shows the metric under 'plrus' divided by the metric under 'mprs'. Second row shows the averaged runtime of the workloads in seconds. Third row shows the number of system-wide major page faults while the test was ongoing. Fourth row shows the system-wide memory pressure stall for some processes in microseconds while the test was ongoing. In short, PLRUS achieves 10% memory PSI (some) reduction, 14% major page faults reduction, and 3.74% speedup under memory pressure. We also confirmed the CPU usage of kdamond was 2.61% of single CPU, which is below 4% as expected. Sequence of Patches =================== The first and second patch cleans up DAMON debugfs interface and DAMOS_PAGEOUT handling code of physical address space monitoring operations implementation for easier extension of the code. The thrid and fourth patches implement a new DAMOS action called 'lru_prio', which prioritizes pages under memory regions which have a user-specified access pattern, and document it, respectively. The fifth and sixth patches implement yet another new DAMOS action called 'lru_deprio', which deprioritizes pages under memory regions which have a user-specified access pattern, and document it, respectively. The seventh patch implements a static kernel module called 'damon_lru_sort', which utilizes the DAMON-based proactive LRU-lists sorting under conservatively chosen default parameter. Finally, the eighth patch documents 'damon_lru_sort'. This patch (of 8): DAMON debugfs interface assumes users will write 'damos_action' value directly to the 'schemes' file. This makes adding new 'damos_action' in the middle of its definition breaks the backward compatibility of DAMON debugfs interface, as values of some 'damos_action' could be changed. To mitigate the situation, this commit adds mappings between the user inputs and 'damos_action' value and makes DAMON debugfs code uses those. Link: https://lkml.kernel.org/r/20220613192301.8817-1-sj@kernel.org Link: https://lkml.kernel.org/r/20220613192301.8817-2-sj@kernel.org Signed-off-by: SeongJae Park <sj@kernel.org> Cc: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-06-13 19:22:53 +00:00
action = dbgfs_scheme_action_to_damos_action(action_input);
if ((int)action < 0)
goto fail;
if (pattern.min_sz_region > pattern.max_sz_region ||
pattern.min_nr_accesses > pattern.max_nr_accesses ||
pattern.min_age_region > pattern.max_age_region)
goto fail;
if (wmarks.high < wmarks.mid || wmarks.high < wmarks.low ||
wmarks.mid < wmarks.low)
goto fail;
pos += parsed;
mm/damon/core: implement scheme-specific apply interval DAMON-based operation schemes are applied for every aggregation interval. That was mainly because schemes were using nr_accesses, which be complete to be used for every aggregation interval. However, the schemes are now using nr_accesses_bp, which is updated for each sampling interval in a way that reasonable to be used. Therefore, there is no reason to apply schemes for each aggregation interval. The unnecessary alignment with aggregation interval was also making some use cases of DAMOS tricky. Quotas setting under long aggregation interval is one such example. Suppose the aggregation interval is ten seconds, and there is a scheme having CPU quota 100ms per 1s. The scheme will actually uses 100ms per ten seconds, since it cannobe be applied before next aggregation interval. The feature is working as intended, but the results might not that intuitive for some users. This could be fixed by updating the quota to 1s per 10s. But, in the case, the CPU usage of DAMOS could look like spikes, and would actually make a bad effect to other CPU-sensitive workloads. Implement a dedicated timing interval for each DAMON-based operation scheme, namely apply_interval. The interval will be sampling interval aligned, and each scheme will be applied for its apply_interval. The interval is set to 0 by default, and it means the scheme should use the aggregation interval instead. This avoids old users getting any behavioral difference. Link: https://lkml.kernel.org/r/20230916020945.47296-5-sj@kernel.org Signed-off-by: SeongJae Park <sj@kernel.org> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Shuah Khan <shuah@kernel.org> Cc: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-09-16 02:09:40 +00:00
scheme = damon_new_scheme(&pattern, action, 0, &quota,
&wmarks);
if (!scheme)
goto fail;
schemes[*nr_schemes] = scheme;
*nr_schemes += 1;
}
return schemes;
fail:
free_schemes_arr(schemes, *nr_schemes);
return NULL;
}
static ssize_t dbgfs_schemes_write(struct file *file, const char __user *buf,
size_t count, loff_t *ppos)
{
struct damon_ctx *ctx = file->private_data;
char *kbuf;
struct damos **schemes;
ssize_t nr_schemes = 0, ret;
kbuf = user_input_str(buf, count, ppos);
if (IS_ERR(kbuf))
return PTR_ERR(kbuf);
schemes = str_to_schemes(kbuf, count, &nr_schemes);
if (!schemes) {
ret = -EINVAL;
goto out;
}
mutex_lock(&ctx->kdamond_lock);
if (ctx->kdamond) {
ret = -EBUSY;
goto unlock_out;
}
damon_set_schemes(ctx, schemes, nr_schemes);
ret = count;
nr_schemes = 0;
unlock_out:
mutex_unlock(&ctx->kdamond_lock);
free_schemes_arr(schemes, nr_schemes);
out:
kfree(kbuf);
return ret;
}
mm/damon: implement a debugfs-based user space interface DAMON is designed to be used by kernel space code such as the memory management subsystems, and therefore it provides only kernel space API. That said, letting the user space control DAMON could provide some benefits to them. For example, it will allow user space to analyze their specific workloads and make their own special optimizations. For such cases, this commit implements a simple DAMON application kernel module, namely 'damon-dbgfs', which merely wraps the DAMON api and exports those to the user space via the debugfs. 'damon-dbgfs' exports three files, ``attrs``, ``target_ids``, and ``monitor_on`` under its debugfs directory, ``<debugfs>/damon/``. Attributes ---------- Users can read and write the ``sampling interval``, ``aggregation interval``, ``regions update interval``, and min/max number of monitoring target regions by reading from and writing to the ``attrs`` file. For example, below commands set those values to 5 ms, 100 ms, 1,000 ms, 10, 1000 and check it again:: # cd <debugfs>/damon # echo 5000 100000 1000000 10 1000 > attrs # cat attrs 5000 100000 1000000 10 1000 Target IDs ---------- Some types of address spaces supports multiple monitoring target. For example, the virtual memory address spaces monitoring can have multiple processes as the monitoring targets. Users can set the targets by writing relevant id values of the targets to, and get the ids of the current targets by reading from the ``target_ids`` file. In case of the virtual address spaces monitoring, the values should be pids of the monitoring target processes. For example, below commands set processes having pids 42 and 4242 as the monitoring targets and check it again:: # cd <debugfs>/damon # echo 42 4242 > target_ids # cat target_ids 42 4242 Note that setting the target ids doesn't start the monitoring. Turning On/Off -------------- Setting the files as described above doesn't incur effect unless you explicitly start the monitoring. You can start, stop, and check the current status of the monitoring by writing to and reading from the ``monitor_on`` file. Writing ``on`` to the file starts the monitoring of the targets with the attributes. Writing ``off`` to the file stops those. DAMON also stops if every targets are invalidated (in case of the virtual memory monitoring, target processes are invalidated when terminated). Below example commands turn on, off, and check the status of DAMON:: # cd <debugfs>/damon # echo on > monitor_on # echo off > monitor_on # cat monitor_on off Please note that you cannot write to the above-mentioned debugfs files while the monitoring is turned on. If you write to the files while DAMON is running, an error code such as ``-EBUSY`` will be returned. [akpm@linux-foundation.org: remove unneeded "alloc failed" printks] [akpm@linux-foundation.org: replace macro with static inline] Link: https://lkml.kernel.org/r/20210716081449.22187-8-sj38.park@gmail.com Signed-off-by: SeongJae Park <sjpark@amazon.de> Reviewed-by: Leonard Foerster <foersleo@amazon.de> Reviewed-by: Fernand Sieber <sieberf@amazon.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Amit Shah <amit@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Brendan Higgins <brendanhiggins@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: David Woodhouse <dwmw@amazon.com> Cc: Fan Du <fan.du@intel.com> Cc: Greg Kroah-Hartman <greg@kroah.com> Cc: Greg Thelen <gthelen@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joe Perches <joe@perches.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Marco Elver <elver@google.com> Cc: Markus Boehme <markubo@amazon.de> Cc: Maximilian Heyne <mheyne@amazon.de> Cc: Mel Gorman <mgorman@suse.de> Cc: Minchan Kim <minchan@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@surriel.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-08 02:56:53 +00:00
static ssize_t sprint_target_ids(struct damon_ctx *ctx, char *buf, ssize_t len)
{
struct damon_target *t;
int id;
mm/damon: implement a debugfs-based user space interface DAMON is designed to be used by kernel space code such as the memory management subsystems, and therefore it provides only kernel space API. That said, letting the user space control DAMON could provide some benefits to them. For example, it will allow user space to analyze their specific workloads and make their own special optimizations. For such cases, this commit implements a simple DAMON application kernel module, namely 'damon-dbgfs', which merely wraps the DAMON api and exports those to the user space via the debugfs. 'damon-dbgfs' exports three files, ``attrs``, ``target_ids``, and ``monitor_on`` under its debugfs directory, ``<debugfs>/damon/``. Attributes ---------- Users can read and write the ``sampling interval``, ``aggregation interval``, ``regions update interval``, and min/max number of monitoring target regions by reading from and writing to the ``attrs`` file. For example, below commands set those values to 5 ms, 100 ms, 1,000 ms, 10, 1000 and check it again:: # cd <debugfs>/damon # echo 5000 100000 1000000 10 1000 > attrs # cat attrs 5000 100000 1000000 10 1000 Target IDs ---------- Some types of address spaces supports multiple monitoring target. For example, the virtual memory address spaces monitoring can have multiple processes as the monitoring targets. Users can set the targets by writing relevant id values of the targets to, and get the ids of the current targets by reading from the ``target_ids`` file. In case of the virtual address spaces monitoring, the values should be pids of the monitoring target processes. For example, below commands set processes having pids 42 and 4242 as the monitoring targets and check it again:: # cd <debugfs>/damon # echo 42 4242 > target_ids # cat target_ids 42 4242 Note that setting the target ids doesn't start the monitoring. Turning On/Off -------------- Setting the files as described above doesn't incur effect unless you explicitly start the monitoring. You can start, stop, and check the current status of the monitoring by writing to and reading from the ``monitor_on`` file. Writing ``on`` to the file starts the monitoring of the targets with the attributes. Writing ``off`` to the file stops those. DAMON also stops if every targets are invalidated (in case of the virtual memory monitoring, target processes are invalidated when terminated). Below example commands turn on, off, and check the status of DAMON:: # cd <debugfs>/damon # echo on > monitor_on # echo off > monitor_on # cat monitor_on off Please note that you cannot write to the above-mentioned debugfs files while the monitoring is turned on. If you write to the files while DAMON is running, an error code such as ``-EBUSY`` will be returned. [akpm@linux-foundation.org: remove unneeded "alloc failed" printks] [akpm@linux-foundation.org: replace macro with static inline] Link: https://lkml.kernel.org/r/20210716081449.22187-8-sj38.park@gmail.com Signed-off-by: SeongJae Park <sjpark@amazon.de> Reviewed-by: Leonard Foerster <foersleo@amazon.de> Reviewed-by: Fernand Sieber <sieberf@amazon.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Amit Shah <amit@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Brendan Higgins <brendanhiggins@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: David Woodhouse <dwmw@amazon.com> Cc: Fan Du <fan.du@intel.com> Cc: Greg Kroah-Hartman <greg@kroah.com> Cc: Greg Thelen <gthelen@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joe Perches <joe@perches.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Marco Elver <elver@google.com> Cc: Markus Boehme <markubo@amazon.de> Cc: Maximilian Heyne <mheyne@amazon.de> Cc: Mel Gorman <mgorman@suse.de> Cc: Minchan Kim <minchan@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@surriel.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-08 02:56:53 +00:00
int written = 0;
int rc;
damon_for_each_target(t, ctx) {
if (damon_target_has_pid(ctx))
mm/damon: implement a debugfs-based user space interface DAMON is designed to be used by kernel space code such as the memory management subsystems, and therefore it provides only kernel space API. That said, letting the user space control DAMON could provide some benefits to them. For example, it will allow user space to analyze their specific workloads and make their own special optimizations. For such cases, this commit implements a simple DAMON application kernel module, namely 'damon-dbgfs', which merely wraps the DAMON api and exports those to the user space via the debugfs. 'damon-dbgfs' exports three files, ``attrs``, ``target_ids``, and ``monitor_on`` under its debugfs directory, ``<debugfs>/damon/``. Attributes ---------- Users can read and write the ``sampling interval``, ``aggregation interval``, ``regions update interval``, and min/max number of monitoring target regions by reading from and writing to the ``attrs`` file. For example, below commands set those values to 5 ms, 100 ms, 1,000 ms, 10, 1000 and check it again:: # cd <debugfs>/damon # echo 5000 100000 1000000 10 1000 > attrs # cat attrs 5000 100000 1000000 10 1000 Target IDs ---------- Some types of address spaces supports multiple monitoring target. For example, the virtual memory address spaces monitoring can have multiple processes as the monitoring targets. Users can set the targets by writing relevant id values of the targets to, and get the ids of the current targets by reading from the ``target_ids`` file. In case of the virtual address spaces monitoring, the values should be pids of the monitoring target processes. For example, below commands set processes having pids 42 and 4242 as the monitoring targets and check it again:: # cd <debugfs>/damon # echo 42 4242 > target_ids # cat target_ids 42 4242 Note that setting the target ids doesn't start the monitoring. Turning On/Off -------------- Setting the files as described above doesn't incur effect unless you explicitly start the monitoring. You can start, stop, and check the current status of the monitoring by writing to and reading from the ``monitor_on`` file. Writing ``on`` to the file starts the monitoring of the targets with the attributes. Writing ``off`` to the file stops those. DAMON also stops if every targets are invalidated (in case of the virtual memory monitoring, target processes are invalidated when terminated). Below example commands turn on, off, and check the status of DAMON:: # cd <debugfs>/damon # echo on > monitor_on # echo off > monitor_on # cat monitor_on off Please note that you cannot write to the above-mentioned debugfs files while the monitoring is turned on. If you write to the files while DAMON is running, an error code such as ``-EBUSY`` will be returned. [akpm@linux-foundation.org: remove unneeded "alloc failed" printks] [akpm@linux-foundation.org: replace macro with static inline] Link: https://lkml.kernel.org/r/20210716081449.22187-8-sj38.park@gmail.com Signed-off-by: SeongJae Park <sjpark@amazon.de> Reviewed-by: Leonard Foerster <foersleo@amazon.de> Reviewed-by: Fernand Sieber <sieberf@amazon.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Amit Shah <amit@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Brendan Higgins <brendanhiggins@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: David Woodhouse <dwmw@amazon.com> Cc: Fan Du <fan.du@intel.com> Cc: Greg Kroah-Hartman <greg@kroah.com> Cc: Greg Thelen <gthelen@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joe Perches <joe@perches.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Marco Elver <elver@google.com> Cc: Markus Boehme <markubo@amazon.de> Cc: Maximilian Heyne <mheyne@amazon.de> Cc: Mel Gorman <mgorman@suse.de> Cc: Minchan Kim <minchan@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@surriel.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-08 02:56:53 +00:00
/* Show pid numbers to debugfs users */
id = pid_vnr(t->pid);
else
/* Show 42 for physical address space, just for fun */
id = 42;
mm/damon: implement a debugfs-based user space interface DAMON is designed to be used by kernel space code such as the memory management subsystems, and therefore it provides only kernel space API. That said, letting the user space control DAMON could provide some benefits to them. For example, it will allow user space to analyze their specific workloads and make their own special optimizations. For such cases, this commit implements a simple DAMON application kernel module, namely 'damon-dbgfs', which merely wraps the DAMON api and exports those to the user space via the debugfs. 'damon-dbgfs' exports three files, ``attrs``, ``target_ids``, and ``monitor_on`` under its debugfs directory, ``<debugfs>/damon/``. Attributes ---------- Users can read and write the ``sampling interval``, ``aggregation interval``, ``regions update interval``, and min/max number of monitoring target regions by reading from and writing to the ``attrs`` file. For example, below commands set those values to 5 ms, 100 ms, 1,000 ms, 10, 1000 and check it again:: # cd <debugfs>/damon # echo 5000 100000 1000000 10 1000 > attrs # cat attrs 5000 100000 1000000 10 1000 Target IDs ---------- Some types of address spaces supports multiple monitoring target. For example, the virtual memory address spaces monitoring can have multiple processes as the monitoring targets. Users can set the targets by writing relevant id values of the targets to, and get the ids of the current targets by reading from the ``target_ids`` file. In case of the virtual address spaces monitoring, the values should be pids of the monitoring target processes. For example, below commands set processes having pids 42 and 4242 as the monitoring targets and check it again:: # cd <debugfs>/damon # echo 42 4242 > target_ids # cat target_ids 42 4242 Note that setting the target ids doesn't start the monitoring. Turning On/Off -------------- Setting the files as described above doesn't incur effect unless you explicitly start the monitoring. You can start, stop, and check the current status of the monitoring by writing to and reading from the ``monitor_on`` file. Writing ``on`` to the file starts the monitoring of the targets with the attributes. Writing ``off`` to the file stops those. DAMON also stops if every targets are invalidated (in case of the virtual memory monitoring, target processes are invalidated when terminated). Below example commands turn on, off, and check the status of DAMON:: # cd <debugfs>/damon # echo on > monitor_on # echo off > monitor_on # cat monitor_on off Please note that you cannot write to the above-mentioned debugfs files while the monitoring is turned on. If you write to the files while DAMON is running, an error code such as ``-EBUSY`` will be returned. [akpm@linux-foundation.org: remove unneeded "alloc failed" printks] [akpm@linux-foundation.org: replace macro with static inline] Link: https://lkml.kernel.org/r/20210716081449.22187-8-sj38.park@gmail.com Signed-off-by: SeongJae Park <sjpark@amazon.de> Reviewed-by: Leonard Foerster <foersleo@amazon.de> Reviewed-by: Fernand Sieber <sieberf@amazon.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Amit Shah <amit@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Brendan Higgins <brendanhiggins@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: David Woodhouse <dwmw@amazon.com> Cc: Fan Du <fan.du@intel.com> Cc: Greg Kroah-Hartman <greg@kroah.com> Cc: Greg Thelen <gthelen@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joe Perches <joe@perches.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Marco Elver <elver@google.com> Cc: Markus Boehme <markubo@amazon.de> Cc: Maximilian Heyne <mheyne@amazon.de> Cc: Mel Gorman <mgorman@suse.de> Cc: Minchan Kim <minchan@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@surriel.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-08 02:56:53 +00:00
rc = scnprintf(&buf[written], len - written, "%d ", id);
mm/damon: implement a debugfs-based user space interface DAMON is designed to be used by kernel space code such as the memory management subsystems, and therefore it provides only kernel space API. That said, letting the user space control DAMON could provide some benefits to them. For example, it will allow user space to analyze their specific workloads and make their own special optimizations. For such cases, this commit implements a simple DAMON application kernel module, namely 'damon-dbgfs', which merely wraps the DAMON api and exports those to the user space via the debugfs. 'damon-dbgfs' exports three files, ``attrs``, ``target_ids``, and ``monitor_on`` under its debugfs directory, ``<debugfs>/damon/``. Attributes ---------- Users can read and write the ``sampling interval``, ``aggregation interval``, ``regions update interval``, and min/max number of monitoring target regions by reading from and writing to the ``attrs`` file. For example, below commands set those values to 5 ms, 100 ms, 1,000 ms, 10, 1000 and check it again:: # cd <debugfs>/damon # echo 5000 100000 1000000 10 1000 > attrs # cat attrs 5000 100000 1000000 10 1000 Target IDs ---------- Some types of address spaces supports multiple monitoring target. For example, the virtual memory address spaces monitoring can have multiple processes as the monitoring targets. Users can set the targets by writing relevant id values of the targets to, and get the ids of the current targets by reading from the ``target_ids`` file. In case of the virtual address spaces monitoring, the values should be pids of the monitoring target processes. For example, below commands set processes having pids 42 and 4242 as the monitoring targets and check it again:: # cd <debugfs>/damon # echo 42 4242 > target_ids # cat target_ids 42 4242 Note that setting the target ids doesn't start the monitoring. Turning On/Off -------------- Setting the files as described above doesn't incur effect unless you explicitly start the monitoring. You can start, stop, and check the current status of the monitoring by writing to and reading from the ``monitor_on`` file. Writing ``on`` to the file starts the monitoring of the targets with the attributes. Writing ``off`` to the file stops those. DAMON also stops if every targets are invalidated (in case of the virtual memory monitoring, target processes are invalidated when terminated). Below example commands turn on, off, and check the status of DAMON:: # cd <debugfs>/damon # echo on > monitor_on # echo off > monitor_on # cat monitor_on off Please note that you cannot write to the above-mentioned debugfs files while the monitoring is turned on. If you write to the files while DAMON is running, an error code such as ``-EBUSY`` will be returned. [akpm@linux-foundation.org: remove unneeded "alloc failed" printks] [akpm@linux-foundation.org: replace macro with static inline] Link: https://lkml.kernel.org/r/20210716081449.22187-8-sj38.park@gmail.com Signed-off-by: SeongJae Park <sjpark@amazon.de> Reviewed-by: Leonard Foerster <foersleo@amazon.de> Reviewed-by: Fernand Sieber <sieberf@amazon.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Amit Shah <amit@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Brendan Higgins <brendanhiggins@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: David Woodhouse <dwmw@amazon.com> Cc: Fan Du <fan.du@intel.com> Cc: Greg Kroah-Hartman <greg@kroah.com> Cc: Greg Thelen <gthelen@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joe Perches <joe@perches.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Marco Elver <elver@google.com> Cc: Markus Boehme <markubo@amazon.de> Cc: Maximilian Heyne <mheyne@amazon.de> Cc: Mel Gorman <mgorman@suse.de> Cc: Minchan Kim <minchan@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@surriel.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-08 02:56:53 +00:00
if (!rc)
return -ENOMEM;
written += rc;
}
if (written)
written -= 1;
written += scnprintf(&buf[written], len - written, "\n");
return written;
}
static ssize_t dbgfs_target_ids_read(struct file *file,
char __user *buf, size_t count, loff_t *ppos)
{
struct damon_ctx *ctx = file->private_data;
ssize_t len;
char ids_buf[320];
mutex_lock(&ctx->kdamond_lock);
len = sprint_target_ids(ctx, ids_buf, 320);
mutex_unlock(&ctx->kdamond_lock);
if (len < 0)
return len;
return simple_read_from_buffer(buf, count, ppos, ids_buf, len);
}
/*
* Converts a string into an integers array
mm/damon: implement a debugfs-based user space interface DAMON is designed to be used by kernel space code such as the memory management subsystems, and therefore it provides only kernel space API. That said, letting the user space control DAMON could provide some benefits to them. For example, it will allow user space to analyze their specific workloads and make their own special optimizations. For such cases, this commit implements a simple DAMON application kernel module, namely 'damon-dbgfs', which merely wraps the DAMON api and exports those to the user space via the debugfs. 'damon-dbgfs' exports three files, ``attrs``, ``target_ids``, and ``monitor_on`` under its debugfs directory, ``<debugfs>/damon/``. Attributes ---------- Users can read and write the ``sampling interval``, ``aggregation interval``, ``regions update interval``, and min/max number of monitoring target regions by reading from and writing to the ``attrs`` file. For example, below commands set those values to 5 ms, 100 ms, 1,000 ms, 10, 1000 and check it again:: # cd <debugfs>/damon # echo 5000 100000 1000000 10 1000 > attrs # cat attrs 5000 100000 1000000 10 1000 Target IDs ---------- Some types of address spaces supports multiple monitoring target. For example, the virtual memory address spaces monitoring can have multiple processes as the monitoring targets. Users can set the targets by writing relevant id values of the targets to, and get the ids of the current targets by reading from the ``target_ids`` file. In case of the virtual address spaces monitoring, the values should be pids of the monitoring target processes. For example, below commands set processes having pids 42 and 4242 as the monitoring targets and check it again:: # cd <debugfs>/damon # echo 42 4242 > target_ids # cat target_ids 42 4242 Note that setting the target ids doesn't start the monitoring. Turning On/Off -------------- Setting the files as described above doesn't incur effect unless you explicitly start the monitoring. You can start, stop, and check the current status of the monitoring by writing to and reading from the ``monitor_on`` file. Writing ``on`` to the file starts the monitoring of the targets with the attributes. Writing ``off`` to the file stops those. DAMON also stops if every targets are invalidated (in case of the virtual memory monitoring, target processes are invalidated when terminated). Below example commands turn on, off, and check the status of DAMON:: # cd <debugfs>/damon # echo on > monitor_on # echo off > monitor_on # cat monitor_on off Please note that you cannot write to the above-mentioned debugfs files while the monitoring is turned on. If you write to the files while DAMON is running, an error code such as ``-EBUSY`` will be returned. [akpm@linux-foundation.org: remove unneeded "alloc failed" printks] [akpm@linux-foundation.org: replace macro with static inline] Link: https://lkml.kernel.org/r/20210716081449.22187-8-sj38.park@gmail.com Signed-off-by: SeongJae Park <sjpark@amazon.de> Reviewed-by: Leonard Foerster <foersleo@amazon.de> Reviewed-by: Fernand Sieber <sieberf@amazon.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Amit Shah <amit@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Brendan Higgins <brendanhiggins@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: David Woodhouse <dwmw@amazon.com> Cc: Fan Du <fan.du@intel.com> Cc: Greg Kroah-Hartman <greg@kroah.com> Cc: Greg Thelen <gthelen@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joe Perches <joe@perches.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Marco Elver <elver@google.com> Cc: Markus Boehme <markubo@amazon.de> Cc: Maximilian Heyne <mheyne@amazon.de> Cc: Mel Gorman <mgorman@suse.de> Cc: Minchan Kim <minchan@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@surriel.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-08 02:56:53 +00:00
*
* Returns an array of integers array if the conversion success, or NULL
* otherwise.
mm/damon: implement a debugfs-based user space interface DAMON is designed to be used by kernel space code such as the memory management subsystems, and therefore it provides only kernel space API. That said, letting the user space control DAMON could provide some benefits to them. For example, it will allow user space to analyze their specific workloads and make their own special optimizations. For such cases, this commit implements a simple DAMON application kernel module, namely 'damon-dbgfs', which merely wraps the DAMON api and exports those to the user space via the debugfs. 'damon-dbgfs' exports three files, ``attrs``, ``target_ids``, and ``monitor_on`` under its debugfs directory, ``<debugfs>/damon/``. Attributes ---------- Users can read and write the ``sampling interval``, ``aggregation interval``, ``regions update interval``, and min/max number of monitoring target regions by reading from and writing to the ``attrs`` file. For example, below commands set those values to 5 ms, 100 ms, 1,000 ms, 10, 1000 and check it again:: # cd <debugfs>/damon # echo 5000 100000 1000000 10 1000 > attrs # cat attrs 5000 100000 1000000 10 1000 Target IDs ---------- Some types of address spaces supports multiple monitoring target. For example, the virtual memory address spaces monitoring can have multiple processes as the monitoring targets. Users can set the targets by writing relevant id values of the targets to, and get the ids of the current targets by reading from the ``target_ids`` file. In case of the virtual address spaces monitoring, the values should be pids of the monitoring target processes. For example, below commands set processes having pids 42 and 4242 as the monitoring targets and check it again:: # cd <debugfs>/damon # echo 42 4242 > target_ids # cat target_ids 42 4242 Note that setting the target ids doesn't start the monitoring. Turning On/Off -------------- Setting the files as described above doesn't incur effect unless you explicitly start the monitoring. You can start, stop, and check the current status of the monitoring by writing to and reading from the ``monitor_on`` file. Writing ``on`` to the file starts the monitoring of the targets with the attributes. Writing ``off`` to the file stops those. DAMON also stops if every targets are invalidated (in case of the virtual memory monitoring, target processes are invalidated when terminated). Below example commands turn on, off, and check the status of DAMON:: # cd <debugfs>/damon # echo on > monitor_on # echo off > monitor_on # cat monitor_on off Please note that you cannot write to the above-mentioned debugfs files while the monitoring is turned on. If you write to the files while DAMON is running, an error code such as ``-EBUSY`` will be returned. [akpm@linux-foundation.org: remove unneeded "alloc failed" printks] [akpm@linux-foundation.org: replace macro with static inline] Link: https://lkml.kernel.org/r/20210716081449.22187-8-sj38.park@gmail.com Signed-off-by: SeongJae Park <sjpark@amazon.de> Reviewed-by: Leonard Foerster <foersleo@amazon.de> Reviewed-by: Fernand Sieber <sieberf@amazon.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Amit Shah <amit@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Brendan Higgins <brendanhiggins@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: David Woodhouse <dwmw@amazon.com> Cc: Fan Du <fan.du@intel.com> Cc: Greg Kroah-Hartman <greg@kroah.com> Cc: Greg Thelen <gthelen@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joe Perches <joe@perches.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Marco Elver <elver@google.com> Cc: Markus Boehme <markubo@amazon.de> Cc: Maximilian Heyne <mheyne@amazon.de> Cc: Mel Gorman <mgorman@suse.de> Cc: Minchan Kim <minchan@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@surriel.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-08 02:56:53 +00:00
*/
static int *str_to_ints(const char *str, ssize_t len, ssize_t *nr_ints)
mm/damon: implement a debugfs-based user space interface DAMON is designed to be used by kernel space code such as the memory management subsystems, and therefore it provides only kernel space API. That said, letting the user space control DAMON could provide some benefits to them. For example, it will allow user space to analyze their specific workloads and make their own special optimizations. For such cases, this commit implements a simple DAMON application kernel module, namely 'damon-dbgfs', which merely wraps the DAMON api and exports those to the user space via the debugfs. 'damon-dbgfs' exports three files, ``attrs``, ``target_ids``, and ``monitor_on`` under its debugfs directory, ``<debugfs>/damon/``. Attributes ---------- Users can read and write the ``sampling interval``, ``aggregation interval``, ``regions update interval``, and min/max number of monitoring target regions by reading from and writing to the ``attrs`` file. For example, below commands set those values to 5 ms, 100 ms, 1,000 ms, 10, 1000 and check it again:: # cd <debugfs>/damon # echo 5000 100000 1000000 10 1000 > attrs # cat attrs 5000 100000 1000000 10 1000 Target IDs ---------- Some types of address spaces supports multiple monitoring target. For example, the virtual memory address spaces monitoring can have multiple processes as the monitoring targets. Users can set the targets by writing relevant id values of the targets to, and get the ids of the current targets by reading from the ``target_ids`` file. In case of the virtual address spaces monitoring, the values should be pids of the monitoring target processes. For example, below commands set processes having pids 42 and 4242 as the monitoring targets and check it again:: # cd <debugfs>/damon # echo 42 4242 > target_ids # cat target_ids 42 4242 Note that setting the target ids doesn't start the monitoring. Turning On/Off -------------- Setting the files as described above doesn't incur effect unless you explicitly start the monitoring. You can start, stop, and check the current status of the monitoring by writing to and reading from the ``monitor_on`` file. Writing ``on`` to the file starts the monitoring of the targets with the attributes. Writing ``off`` to the file stops those. DAMON also stops if every targets are invalidated (in case of the virtual memory monitoring, target processes are invalidated when terminated). Below example commands turn on, off, and check the status of DAMON:: # cd <debugfs>/damon # echo on > monitor_on # echo off > monitor_on # cat monitor_on off Please note that you cannot write to the above-mentioned debugfs files while the monitoring is turned on. If you write to the files while DAMON is running, an error code such as ``-EBUSY`` will be returned. [akpm@linux-foundation.org: remove unneeded "alloc failed" printks] [akpm@linux-foundation.org: replace macro with static inline] Link: https://lkml.kernel.org/r/20210716081449.22187-8-sj38.park@gmail.com Signed-off-by: SeongJae Park <sjpark@amazon.de> Reviewed-by: Leonard Foerster <foersleo@amazon.de> Reviewed-by: Fernand Sieber <sieberf@amazon.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Amit Shah <amit@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Brendan Higgins <brendanhiggins@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: David Woodhouse <dwmw@amazon.com> Cc: Fan Du <fan.du@intel.com> Cc: Greg Kroah-Hartman <greg@kroah.com> Cc: Greg Thelen <gthelen@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joe Perches <joe@perches.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Marco Elver <elver@google.com> Cc: Markus Boehme <markubo@amazon.de> Cc: Maximilian Heyne <mheyne@amazon.de> Cc: Mel Gorman <mgorman@suse.de> Cc: Minchan Kim <minchan@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@surriel.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-08 02:56:53 +00:00
{
int *array;
const int max_nr_ints = 32;
int nr;
mm/damon: implement a debugfs-based user space interface DAMON is designed to be used by kernel space code such as the memory management subsystems, and therefore it provides only kernel space API. That said, letting the user space control DAMON could provide some benefits to them. For example, it will allow user space to analyze their specific workloads and make their own special optimizations. For such cases, this commit implements a simple DAMON application kernel module, namely 'damon-dbgfs', which merely wraps the DAMON api and exports those to the user space via the debugfs. 'damon-dbgfs' exports three files, ``attrs``, ``target_ids``, and ``monitor_on`` under its debugfs directory, ``<debugfs>/damon/``. Attributes ---------- Users can read and write the ``sampling interval``, ``aggregation interval``, ``regions update interval``, and min/max number of monitoring target regions by reading from and writing to the ``attrs`` file. For example, below commands set those values to 5 ms, 100 ms, 1,000 ms, 10, 1000 and check it again:: # cd <debugfs>/damon # echo 5000 100000 1000000 10 1000 > attrs # cat attrs 5000 100000 1000000 10 1000 Target IDs ---------- Some types of address spaces supports multiple monitoring target. For example, the virtual memory address spaces monitoring can have multiple processes as the monitoring targets. Users can set the targets by writing relevant id values of the targets to, and get the ids of the current targets by reading from the ``target_ids`` file. In case of the virtual address spaces monitoring, the values should be pids of the monitoring target processes. For example, below commands set processes having pids 42 and 4242 as the monitoring targets and check it again:: # cd <debugfs>/damon # echo 42 4242 > target_ids # cat target_ids 42 4242 Note that setting the target ids doesn't start the monitoring. Turning On/Off -------------- Setting the files as described above doesn't incur effect unless you explicitly start the monitoring. You can start, stop, and check the current status of the monitoring by writing to and reading from the ``monitor_on`` file. Writing ``on`` to the file starts the monitoring of the targets with the attributes. Writing ``off`` to the file stops those. DAMON also stops if every targets are invalidated (in case of the virtual memory monitoring, target processes are invalidated when terminated). Below example commands turn on, off, and check the status of DAMON:: # cd <debugfs>/damon # echo on > monitor_on # echo off > monitor_on # cat monitor_on off Please note that you cannot write to the above-mentioned debugfs files while the monitoring is turned on. If you write to the files while DAMON is running, an error code such as ``-EBUSY`` will be returned. [akpm@linux-foundation.org: remove unneeded "alloc failed" printks] [akpm@linux-foundation.org: replace macro with static inline] Link: https://lkml.kernel.org/r/20210716081449.22187-8-sj38.park@gmail.com Signed-off-by: SeongJae Park <sjpark@amazon.de> Reviewed-by: Leonard Foerster <foersleo@amazon.de> Reviewed-by: Fernand Sieber <sieberf@amazon.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Amit Shah <amit@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Brendan Higgins <brendanhiggins@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: David Woodhouse <dwmw@amazon.com> Cc: Fan Du <fan.du@intel.com> Cc: Greg Kroah-Hartman <greg@kroah.com> Cc: Greg Thelen <gthelen@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joe Perches <joe@perches.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Marco Elver <elver@google.com> Cc: Markus Boehme <markubo@amazon.de> Cc: Maximilian Heyne <mheyne@amazon.de> Cc: Mel Gorman <mgorman@suse.de> Cc: Minchan Kim <minchan@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@surriel.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-08 02:56:53 +00:00
int pos = 0, parsed, ret;
*nr_ints = 0;
array = kmalloc_array(max_nr_ints, sizeof(*array), GFP_KERNEL);
if (!array)
mm/damon: implement a debugfs-based user space interface DAMON is designed to be used by kernel space code such as the memory management subsystems, and therefore it provides only kernel space API. That said, letting the user space control DAMON could provide some benefits to them. For example, it will allow user space to analyze their specific workloads and make their own special optimizations. For such cases, this commit implements a simple DAMON application kernel module, namely 'damon-dbgfs', which merely wraps the DAMON api and exports those to the user space via the debugfs. 'damon-dbgfs' exports three files, ``attrs``, ``target_ids``, and ``monitor_on`` under its debugfs directory, ``<debugfs>/damon/``. Attributes ---------- Users can read and write the ``sampling interval``, ``aggregation interval``, ``regions update interval``, and min/max number of monitoring target regions by reading from and writing to the ``attrs`` file. For example, below commands set those values to 5 ms, 100 ms, 1,000 ms, 10, 1000 and check it again:: # cd <debugfs>/damon # echo 5000 100000 1000000 10 1000 > attrs # cat attrs 5000 100000 1000000 10 1000 Target IDs ---------- Some types of address spaces supports multiple monitoring target. For example, the virtual memory address spaces monitoring can have multiple processes as the monitoring targets. Users can set the targets by writing relevant id values of the targets to, and get the ids of the current targets by reading from the ``target_ids`` file. In case of the virtual address spaces monitoring, the values should be pids of the monitoring target processes. For example, below commands set processes having pids 42 and 4242 as the monitoring targets and check it again:: # cd <debugfs>/damon # echo 42 4242 > target_ids # cat target_ids 42 4242 Note that setting the target ids doesn't start the monitoring. Turning On/Off -------------- Setting the files as described above doesn't incur effect unless you explicitly start the monitoring. You can start, stop, and check the current status of the monitoring by writing to and reading from the ``monitor_on`` file. Writing ``on`` to the file starts the monitoring of the targets with the attributes. Writing ``off`` to the file stops those. DAMON also stops if every targets are invalidated (in case of the virtual memory monitoring, target processes are invalidated when terminated). Below example commands turn on, off, and check the status of DAMON:: # cd <debugfs>/damon # echo on > monitor_on # echo off > monitor_on # cat monitor_on off Please note that you cannot write to the above-mentioned debugfs files while the monitoring is turned on. If you write to the files while DAMON is running, an error code such as ``-EBUSY`` will be returned. [akpm@linux-foundation.org: remove unneeded "alloc failed" printks] [akpm@linux-foundation.org: replace macro with static inline] Link: https://lkml.kernel.org/r/20210716081449.22187-8-sj38.park@gmail.com Signed-off-by: SeongJae Park <sjpark@amazon.de> Reviewed-by: Leonard Foerster <foersleo@amazon.de> Reviewed-by: Fernand Sieber <sieberf@amazon.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Amit Shah <amit@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Brendan Higgins <brendanhiggins@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: David Woodhouse <dwmw@amazon.com> Cc: Fan Du <fan.du@intel.com> Cc: Greg Kroah-Hartman <greg@kroah.com> Cc: Greg Thelen <gthelen@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joe Perches <joe@perches.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Marco Elver <elver@google.com> Cc: Markus Boehme <markubo@amazon.de> Cc: Maximilian Heyne <mheyne@amazon.de> Cc: Mel Gorman <mgorman@suse.de> Cc: Minchan Kim <minchan@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@surriel.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-08 02:56:53 +00:00
return NULL;
while (*nr_ints < max_nr_ints && pos < len) {
ret = sscanf(&str[pos], "%d%n", &nr, &parsed);
mm/damon: implement a debugfs-based user space interface DAMON is designed to be used by kernel space code such as the memory management subsystems, and therefore it provides only kernel space API. That said, letting the user space control DAMON could provide some benefits to them. For example, it will allow user space to analyze their specific workloads and make their own special optimizations. For such cases, this commit implements a simple DAMON application kernel module, namely 'damon-dbgfs', which merely wraps the DAMON api and exports those to the user space via the debugfs. 'damon-dbgfs' exports three files, ``attrs``, ``target_ids``, and ``monitor_on`` under its debugfs directory, ``<debugfs>/damon/``. Attributes ---------- Users can read and write the ``sampling interval``, ``aggregation interval``, ``regions update interval``, and min/max number of monitoring target regions by reading from and writing to the ``attrs`` file. For example, below commands set those values to 5 ms, 100 ms, 1,000 ms, 10, 1000 and check it again:: # cd <debugfs>/damon # echo 5000 100000 1000000 10 1000 > attrs # cat attrs 5000 100000 1000000 10 1000 Target IDs ---------- Some types of address spaces supports multiple monitoring target. For example, the virtual memory address spaces monitoring can have multiple processes as the monitoring targets. Users can set the targets by writing relevant id values of the targets to, and get the ids of the current targets by reading from the ``target_ids`` file. In case of the virtual address spaces monitoring, the values should be pids of the monitoring target processes. For example, below commands set processes having pids 42 and 4242 as the monitoring targets and check it again:: # cd <debugfs>/damon # echo 42 4242 > target_ids # cat target_ids 42 4242 Note that setting the target ids doesn't start the monitoring. Turning On/Off -------------- Setting the files as described above doesn't incur effect unless you explicitly start the monitoring. You can start, stop, and check the current status of the monitoring by writing to and reading from the ``monitor_on`` file. Writing ``on`` to the file starts the monitoring of the targets with the attributes. Writing ``off`` to the file stops those. DAMON also stops if every targets are invalidated (in case of the virtual memory monitoring, target processes are invalidated when terminated). Below example commands turn on, off, and check the status of DAMON:: # cd <debugfs>/damon # echo on > monitor_on # echo off > monitor_on # cat monitor_on off Please note that you cannot write to the above-mentioned debugfs files while the monitoring is turned on. If you write to the files while DAMON is running, an error code such as ``-EBUSY`` will be returned. [akpm@linux-foundation.org: remove unneeded "alloc failed" printks] [akpm@linux-foundation.org: replace macro with static inline] Link: https://lkml.kernel.org/r/20210716081449.22187-8-sj38.park@gmail.com Signed-off-by: SeongJae Park <sjpark@amazon.de> Reviewed-by: Leonard Foerster <foersleo@amazon.de> Reviewed-by: Fernand Sieber <sieberf@amazon.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Amit Shah <amit@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Brendan Higgins <brendanhiggins@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: David Woodhouse <dwmw@amazon.com> Cc: Fan Du <fan.du@intel.com> Cc: Greg Kroah-Hartman <greg@kroah.com> Cc: Greg Thelen <gthelen@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joe Perches <joe@perches.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Marco Elver <elver@google.com> Cc: Markus Boehme <markubo@amazon.de> Cc: Maximilian Heyne <mheyne@amazon.de> Cc: Mel Gorman <mgorman@suse.de> Cc: Minchan Kim <minchan@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@surriel.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-08 02:56:53 +00:00
pos += parsed;
if (ret != 1)
break;
array[*nr_ints] = nr;
*nr_ints += 1;
mm/damon: implement a debugfs-based user space interface DAMON is designed to be used by kernel space code such as the memory management subsystems, and therefore it provides only kernel space API. That said, letting the user space control DAMON could provide some benefits to them. For example, it will allow user space to analyze their specific workloads and make their own special optimizations. For such cases, this commit implements a simple DAMON application kernel module, namely 'damon-dbgfs', which merely wraps the DAMON api and exports those to the user space via the debugfs. 'damon-dbgfs' exports three files, ``attrs``, ``target_ids``, and ``monitor_on`` under its debugfs directory, ``<debugfs>/damon/``. Attributes ---------- Users can read and write the ``sampling interval``, ``aggregation interval``, ``regions update interval``, and min/max number of monitoring target regions by reading from and writing to the ``attrs`` file. For example, below commands set those values to 5 ms, 100 ms, 1,000 ms, 10, 1000 and check it again:: # cd <debugfs>/damon # echo 5000 100000 1000000 10 1000 > attrs # cat attrs 5000 100000 1000000 10 1000 Target IDs ---------- Some types of address spaces supports multiple monitoring target. For example, the virtual memory address spaces monitoring can have multiple processes as the monitoring targets. Users can set the targets by writing relevant id values of the targets to, and get the ids of the current targets by reading from the ``target_ids`` file. In case of the virtual address spaces monitoring, the values should be pids of the monitoring target processes. For example, below commands set processes having pids 42 and 4242 as the monitoring targets and check it again:: # cd <debugfs>/damon # echo 42 4242 > target_ids # cat target_ids 42 4242 Note that setting the target ids doesn't start the monitoring. Turning On/Off -------------- Setting the files as described above doesn't incur effect unless you explicitly start the monitoring. You can start, stop, and check the current status of the monitoring by writing to and reading from the ``monitor_on`` file. Writing ``on`` to the file starts the monitoring of the targets with the attributes. Writing ``off`` to the file stops those. DAMON also stops if every targets are invalidated (in case of the virtual memory monitoring, target processes are invalidated when terminated). Below example commands turn on, off, and check the status of DAMON:: # cd <debugfs>/damon # echo on > monitor_on # echo off > monitor_on # cat monitor_on off Please note that you cannot write to the above-mentioned debugfs files while the monitoring is turned on. If you write to the files while DAMON is running, an error code such as ``-EBUSY`` will be returned. [akpm@linux-foundation.org: remove unneeded "alloc failed" printks] [akpm@linux-foundation.org: replace macro with static inline] Link: https://lkml.kernel.org/r/20210716081449.22187-8-sj38.park@gmail.com Signed-off-by: SeongJae Park <sjpark@amazon.de> Reviewed-by: Leonard Foerster <foersleo@amazon.de> Reviewed-by: Fernand Sieber <sieberf@amazon.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Amit Shah <amit@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Brendan Higgins <brendanhiggins@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: David Woodhouse <dwmw@amazon.com> Cc: Fan Du <fan.du@intel.com> Cc: Greg Kroah-Hartman <greg@kroah.com> Cc: Greg Thelen <gthelen@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joe Perches <joe@perches.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Marco Elver <elver@google.com> Cc: Markus Boehme <markubo@amazon.de> Cc: Maximilian Heyne <mheyne@amazon.de> Cc: Mel Gorman <mgorman@suse.de> Cc: Minchan Kim <minchan@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@surriel.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-08 02:56:53 +00:00
}
return array;
mm/damon: implement a debugfs-based user space interface DAMON is designed to be used by kernel space code such as the memory management subsystems, and therefore it provides only kernel space API. That said, letting the user space control DAMON could provide some benefits to them. For example, it will allow user space to analyze their specific workloads and make their own special optimizations. For such cases, this commit implements a simple DAMON application kernel module, namely 'damon-dbgfs', which merely wraps the DAMON api and exports those to the user space via the debugfs. 'damon-dbgfs' exports three files, ``attrs``, ``target_ids``, and ``monitor_on`` under its debugfs directory, ``<debugfs>/damon/``. Attributes ---------- Users can read and write the ``sampling interval``, ``aggregation interval``, ``regions update interval``, and min/max number of monitoring target regions by reading from and writing to the ``attrs`` file. For example, below commands set those values to 5 ms, 100 ms, 1,000 ms, 10, 1000 and check it again:: # cd <debugfs>/damon # echo 5000 100000 1000000 10 1000 > attrs # cat attrs 5000 100000 1000000 10 1000 Target IDs ---------- Some types of address spaces supports multiple monitoring target. For example, the virtual memory address spaces monitoring can have multiple processes as the monitoring targets. Users can set the targets by writing relevant id values of the targets to, and get the ids of the current targets by reading from the ``target_ids`` file. In case of the virtual address spaces monitoring, the values should be pids of the monitoring target processes. For example, below commands set processes having pids 42 and 4242 as the monitoring targets and check it again:: # cd <debugfs>/damon # echo 42 4242 > target_ids # cat target_ids 42 4242 Note that setting the target ids doesn't start the monitoring. Turning On/Off -------------- Setting the files as described above doesn't incur effect unless you explicitly start the monitoring. You can start, stop, and check the current status of the monitoring by writing to and reading from the ``monitor_on`` file. Writing ``on`` to the file starts the monitoring of the targets with the attributes. Writing ``off`` to the file stops those. DAMON also stops if every targets are invalidated (in case of the virtual memory monitoring, target processes are invalidated when terminated). Below example commands turn on, off, and check the status of DAMON:: # cd <debugfs>/damon # echo on > monitor_on # echo off > monitor_on # cat monitor_on off Please note that you cannot write to the above-mentioned debugfs files while the monitoring is turned on. If you write to the files while DAMON is running, an error code such as ``-EBUSY`` will be returned. [akpm@linux-foundation.org: remove unneeded "alloc failed" printks] [akpm@linux-foundation.org: replace macro with static inline] Link: https://lkml.kernel.org/r/20210716081449.22187-8-sj38.park@gmail.com Signed-off-by: SeongJae Park <sjpark@amazon.de> Reviewed-by: Leonard Foerster <foersleo@amazon.de> Reviewed-by: Fernand Sieber <sieberf@amazon.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Amit Shah <amit@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Brendan Higgins <brendanhiggins@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: David Woodhouse <dwmw@amazon.com> Cc: Fan Du <fan.du@intel.com> Cc: Greg Kroah-Hartman <greg@kroah.com> Cc: Greg Thelen <gthelen@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joe Perches <joe@perches.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Marco Elver <elver@google.com> Cc: Markus Boehme <markubo@amazon.de> Cc: Maximilian Heyne <mheyne@amazon.de> Cc: Mel Gorman <mgorman@suse.de> Cc: Minchan Kim <minchan@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@surriel.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-08 02:56:53 +00:00
}
static void dbgfs_put_pids(struct pid **pids, int nr_pids)
mm/damon: implement a debugfs-based user space interface DAMON is designed to be used by kernel space code such as the memory management subsystems, and therefore it provides only kernel space API. That said, letting the user space control DAMON could provide some benefits to them. For example, it will allow user space to analyze their specific workloads and make their own special optimizations. For such cases, this commit implements a simple DAMON application kernel module, namely 'damon-dbgfs', which merely wraps the DAMON api and exports those to the user space via the debugfs. 'damon-dbgfs' exports three files, ``attrs``, ``target_ids``, and ``monitor_on`` under its debugfs directory, ``<debugfs>/damon/``. Attributes ---------- Users can read and write the ``sampling interval``, ``aggregation interval``, ``regions update interval``, and min/max number of monitoring target regions by reading from and writing to the ``attrs`` file. For example, below commands set those values to 5 ms, 100 ms, 1,000 ms, 10, 1000 and check it again:: # cd <debugfs>/damon # echo 5000 100000 1000000 10 1000 > attrs # cat attrs 5000 100000 1000000 10 1000 Target IDs ---------- Some types of address spaces supports multiple monitoring target. For example, the virtual memory address spaces monitoring can have multiple processes as the monitoring targets. Users can set the targets by writing relevant id values of the targets to, and get the ids of the current targets by reading from the ``target_ids`` file. In case of the virtual address spaces monitoring, the values should be pids of the monitoring target processes. For example, below commands set processes having pids 42 and 4242 as the monitoring targets and check it again:: # cd <debugfs>/damon # echo 42 4242 > target_ids # cat target_ids 42 4242 Note that setting the target ids doesn't start the monitoring. Turning On/Off -------------- Setting the files as described above doesn't incur effect unless you explicitly start the monitoring. You can start, stop, and check the current status of the monitoring by writing to and reading from the ``monitor_on`` file. Writing ``on`` to the file starts the monitoring of the targets with the attributes. Writing ``off`` to the file stops those. DAMON also stops if every targets are invalidated (in case of the virtual memory monitoring, target processes are invalidated when terminated). Below example commands turn on, off, and check the status of DAMON:: # cd <debugfs>/damon # echo on > monitor_on # echo off > monitor_on # cat monitor_on off Please note that you cannot write to the above-mentioned debugfs files while the monitoring is turned on. If you write to the files while DAMON is running, an error code such as ``-EBUSY`` will be returned. [akpm@linux-foundation.org: remove unneeded "alloc failed" printks] [akpm@linux-foundation.org: replace macro with static inline] Link: https://lkml.kernel.org/r/20210716081449.22187-8-sj38.park@gmail.com Signed-off-by: SeongJae Park <sjpark@amazon.de> Reviewed-by: Leonard Foerster <foersleo@amazon.de> Reviewed-by: Fernand Sieber <sieberf@amazon.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Amit Shah <amit@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Brendan Higgins <brendanhiggins@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: David Woodhouse <dwmw@amazon.com> Cc: Fan Du <fan.du@intel.com> Cc: Greg Kroah-Hartman <greg@kroah.com> Cc: Greg Thelen <gthelen@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joe Perches <joe@perches.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Marco Elver <elver@google.com> Cc: Markus Boehme <markubo@amazon.de> Cc: Maximilian Heyne <mheyne@amazon.de> Cc: Mel Gorman <mgorman@suse.de> Cc: Minchan Kim <minchan@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@surriel.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-08 02:56:53 +00:00
{
int i;
for (i = 0; i < nr_pids; i++)
put_pid(pids[i]);
}
/*
* Converts a string into an struct pid pointers array
*
* Returns an array of struct pid pointers if the conversion success, or NULL
* otherwise.
*/
static struct pid **str_to_pids(const char *str, ssize_t len, ssize_t *nr_pids)
{
int *ints;
ssize_t nr_ints;
struct pid **pids;
*nr_pids = 0;
ints = str_to_ints(str, len, &nr_ints);
if (!ints)
return NULL;
pids = kmalloc_array(nr_ints, sizeof(*pids), GFP_KERNEL);
if (!pids)
goto out;
for (; *nr_pids < nr_ints; (*nr_pids)++) {
pids[*nr_pids] = find_get_pid(ints[*nr_pids]);
if (!pids[*nr_pids]) {
dbgfs_put_pids(pids, *nr_pids);
kfree(ints);
kfree(pids);
return NULL;
}
}
out:
kfree(ints);
return pids;
mm/damon: implement a debugfs-based user space interface DAMON is designed to be used by kernel space code such as the memory management subsystems, and therefore it provides only kernel space API. That said, letting the user space control DAMON could provide some benefits to them. For example, it will allow user space to analyze their specific workloads and make their own special optimizations. For such cases, this commit implements a simple DAMON application kernel module, namely 'damon-dbgfs', which merely wraps the DAMON api and exports those to the user space via the debugfs. 'damon-dbgfs' exports three files, ``attrs``, ``target_ids``, and ``monitor_on`` under its debugfs directory, ``<debugfs>/damon/``. Attributes ---------- Users can read and write the ``sampling interval``, ``aggregation interval``, ``regions update interval``, and min/max number of monitoring target regions by reading from and writing to the ``attrs`` file. For example, below commands set those values to 5 ms, 100 ms, 1,000 ms, 10, 1000 and check it again:: # cd <debugfs>/damon # echo 5000 100000 1000000 10 1000 > attrs # cat attrs 5000 100000 1000000 10 1000 Target IDs ---------- Some types of address spaces supports multiple monitoring target. For example, the virtual memory address spaces monitoring can have multiple processes as the monitoring targets. Users can set the targets by writing relevant id values of the targets to, and get the ids of the current targets by reading from the ``target_ids`` file. In case of the virtual address spaces monitoring, the values should be pids of the monitoring target processes. For example, below commands set processes having pids 42 and 4242 as the monitoring targets and check it again:: # cd <debugfs>/damon # echo 42 4242 > target_ids # cat target_ids 42 4242 Note that setting the target ids doesn't start the monitoring. Turning On/Off -------------- Setting the files as described above doesn't incur effect unless you explicitly start the monitoring. You can start, stop, and check the current status of the monitoring by writing to and reading from the ``monitor_on`` file. Writing ``on`` to the file starts the monitoring of the targets with the attributes. Writing ``off`` to the file stops those. DAMON also stops if every targets are invalidated (in case of the virtual memory monitoring, target processes are invalidated when terminated). Below example commands turn on, off, and check the status of DAMON:: # cd <debugfs>/damon # echo on > monitor_on # echo off > monitor_on # cat monitor_on off Please note that you cannot write to the above-mentioned debugfs files while the monitoring is turned on. If you write to the files while DAMON is running, an error code such as ``-EBUSY`` will be returned. [akpm@linux-foundation.org: remove unneeded "alloc failed" printks] [akpm@linux-foundation.org: replace macro with static inline] Link: https://lkml.kernel.org/r/20210716081449.22187-8-sj38.park@gmail.com Signed-off-by: SeongJae Park <sjpark@amazon.de> Reviewed-by: Leonard Foerster <foersleo@amazon.de> Reviewed-by: Fernand Sieber <sieberf@amazon.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Amit Shah <amit@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Brendan Higgins <brendanhiggins@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: David Woodhouse <dwmw@amazon.com> Cc: Fan Du <fan.du@intel.com> Cc: Greg Kroah-Hartman <greg@kroah.com> Cc: Greg Thelen <gthelen@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joe Perches <joe@perches.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Marco Elver <elver@google.com> Cc: Markus Boehme <markubo@amazon.de> Cc: Maximilian Heyne <mheyne@amazon.de> Cc: Mel Gorman <mgorman@suse.de> Cc: Minchan Kim <minchan@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@surriel.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-08 02:56:53 +00:00
}
/*
* dbgfs_set_targets() - Set monitoring targets.
* @ctx: monitoring context
* @nr_targets: number of targets
* @pids: array of target pids (size is same to @nr_targets)
*
* This function should not be called while the kdamond is running. @pids is
* ignored if the context is not configured to have pid in each target. On
* failure, reference counts of all pids in @pids are decremented.
*
* Return: 0 on success, negative error code otherwise.
*/
static int dbgfs_set_targets(struct damon_ctx *ctx, ssize_t nr_targets,
struct pid **pids)
{
ssize_t i;
struct damon_target *t, *next;
damon_for_each_target_safe(t, next, ctx) {
if (damon_target_has_pid(ctx))
put_pid(t->pid);
damon_destroy_target(t);
}
for (i = 0; i < nr_targets; i++) {
t = damon_new_target();
if (!t) {
damon_for_each_target_safe(t, next, ctx)
damon_destroy_target(t);
if (damon_target_has_pid(ctx))
dbgfs_put_pids(pids, nr_targets);
return -ENOMEM;
}
if (damon_target_has_pid(ctx))
t->pid = pids[i];
damon_add_target(ctx, t);
}
return 0;
}
mm/damon: implement a debugfs-based user space interface DAMON is designed to be used by kernel space code such as the memory management subsystems, and therefore it provides only kernel space API. That said, letting the user space control DAMON could provide some benefits to them. For example, it will allow user space to analyze their specific workloads and make their own special optimizations. For such cases, this commit implements a simple DAMON application kernel module, namely 'damon-dbgfs', which merely wraps the DAMON api and exports those to the user space via the debugfs. 'damon-dbgfs' exports three files, ``attrs``, ``target_ids``, and ``monitor_on`` under its debugfs directory, ``<debugfs>/damon/``. Attributes ---------- Users can read and write the ``sampling interval``, ``aggregation interval``, ``regions update interval``, and min/max number of monitoring target regions by reading from and writing to the ``attrs`` file. For example, below commands set those values to 5 ms, 100 ms, 1,000 ms, 10, 1000 and check it again:: # cd <debugfs>/damon # echo 5000 100000 1000000 10 1000 > attrs # cat attrs 5000 100000 1000000 10 1000 Target IDs ---------- Some types of address spaces supports multiple monitoring target. For example, the virtual memory address spaces monitoring can have multiple processes as the monitoring targets. Users can set the targets by writing relevant id values of the targets to, and get the ids of the current targets by reading from the ``target_ids`` file. In case of the virtual address spaces monitoring, the values should be pids of the monitoring target processes. For example, below commands set processes having pids 42 and 4242 as the monitoring targets and check it again:: # cd <debugfs>/damon # echo 42 4242 > target_ids # cat target_ids 42 4242 Note that setting the target ids doesn't start the monitoring. Turning On/Off -------------- Setting the files as described above doesn't incur effect unless you explicitly start the monitoring. You can start, stop, and check the current status of the monitoring by writing to and reading from the ``monitor_on`` file. Writing ``on`` to the file starts the monitoring of the targets with the attributes. Writing ``off`` to the file stops those. DAMON also stops if every targets are invalidated (in case of the virtual memory monitoring, target processes are invalidated when terminated). Below example commands turn on, off, and check the status of DAMON:: # cd <debugfs>/damon # echo on > monitor_on # echo off > monitor_on # cat monitor_on off Please note that you cannot write to the above-mentioned debugfs files while the monitoring is turned on. If you write to the files while DAMON is running, an error code such as ``-EBUSY`` will be returned. [akpm@linux-foundation.org: remove unneeded "alloc failed" printks] [akpm@linux-foundation.org: replace macro with static inline] Link: https://lkml.kernel.org/r/20210716081449.22187-8-sj38.park@gmail.com Signed-off-by: SeongJae Park <sjpark@amazon.de> Reviewed-by: Leonard Foerster <foersleo@amazon.de> Reviewed-by: Fernand Sieber <sieberf@amazon.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Amit Shah <amit@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Brendan Higgins <brendanhiggins@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: David Woodhouse <dwmw@amazon.com> Cc: Fan Du <fan.du@intel.com> Cc: Greg Kroah-Hartman <greg@kroah.com> Cc: Greg Thelen <gthelen@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joe Perches <joe@perches.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Marco Elver <elver@google.com> Cc: Markus Boehme <markubo@amazon.de> Cc: Maximilian Heyne <mheyne@amazon.de> Cc: Mel Gorman <mgorman@suse.de> Cc: Minchan Kim <minchan@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@surriel.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-08 02:56:53 +00:00
static ssize_t dbgfs_target_ids_write(struct file *file,
const char __user *buf, size_t count, loff_t *ppos)
{
struct damon_ctx *ctx = file->private_data;
mm/damon/dbgfs: support physical memory monitoring This makes the 'damon-dbgfs' to support the physical memory monitoring, in addition to the virtual memory monitoring. Users can do the physical memory monitoring by writing a special keyword, 'paddr' to the 'target_ids' debugfs file. Then, DAMON will check the special keyword and configure the monitoring context to run with the primitives for the physical address space. Unlike the virtual memory monitoring, the monitoring target region will not be automatically set. Therefore, users should also set the monitoring target address region using the 'init_regions' debugfs file. Also, note that the physical memory monitoring will not automatically terminated. The user should explicitly turn off the monitoring by writing 'off' to the 'monitor_on' debugfs file. Link: https://lkml.kernel.org/r/20211012205711.29216-7-sj@kernel.org Signed-off-by: SeongJae Park <sj@kernel.org> Cc: Amit Shah <amit@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Brendan Higgins <brendanhiggins@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Rienjes <rientjes@google.com> Cc: David Woodhouse <dwmw@amazon.com> Cc: Greg Thelen <gthelen@google.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Leonard Foerster <foersleo@amazon.de> Cc: Marco Elver <elver@google.com> Cc: Markus Boehme <markubo@amazon.de> Cc: Shakeel Butt <shakeelb@google.com> Cc: Shuah Khan <shuah@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-11-05 20:47:00 +00:00
bool id_is_pid = true;
char *kbuf;
struct pid **target_pids = NULL;
mm/damon: implement a debugfs-based user space interface DAMON is designed to be used by kernel space code such as the memory management subsystems, and therefore it provides only kernel space API. That said, letting the user space control DAMON could provide some benefits to them. For example, it will allow user space to analyze their specific workloads and make their own special optimizations. For such cases, this commit implements a simple DAMON application kernel module, namely 'damon-dbgfs', which merely wraps the DAMON api and exports those to the user space via the debugfs. 'damon-dbgfs' exports three files, ``attrs``, ``target_ids``, and ``monitor_on`` under its debugfs directory, ``<debugfs>/damon/``. Attributes ---------- Users can read and write the ``sampling interval``, ``aggregation interval``, ``regions update interval``, and min/max number of monitoring target regions by reading from and writing to the ``attrs`` file. For example, below commands set those values to 5 ms, 100 ms, 1,000 ms, 10, 1000 and check it again:: # cd <debugfs>/damon # echo 5000 100000 1000000 10 1000 > attrs # cat attrs 5000 100000 1000000 10 1000 Target IDs ---------- Some types of address spaces supports multiple monitoring target. For example, the virtual memory address spaces monitoring can have multiple processes as the monitoring targets. Users can set the targets by writing relevant id values of the targets to, and get the ids of the current targets by reading from the ``target_ids`` file. In case of the virtual address spaces monitoring, the values should be pids of the monitoring target processes. For example, below commands set processes having pids 42 and 4242 as the monitoring targets and check it again:: # cd <debugfs>/damon # echo 42 4242 > target_ids # cat target_ids 42 4242 Note that setting the target ids doesn't start the monitoring. Turning On/Off -------------- Setting the files as described above doesn't incur effect unless you explicitly start the monitoring. You can start, stop, and check the current status of the monitoring by writing to and reading from the ``monitor_on`` file. Writing ``on`` to the file starts the monitoring of the targets with the attributes. Writing ``off`` to the file stops those. DAMON also stops if every targets are invalidated (in case of the virtual memory monitoring, target processes are invalidated when terminated). Below example commands turn on, off, and check the status of DAMON:: # cd <debugfs>/damon # echo on > monitor_on # echo off > monitor_on # cat monitor_on off Please note that you cannot write to the above-mentioned debugfs files while the monitoring is turned on. If you write to the files while DAMON is running, an error code such as ``-EBUSY`` will be returned. [akpm@linux-foundation.org: remove unneeded "alloc failed" printks] [akpm@linux-foundation.org: replace macro with static inline] Link: https://lkml.kernel.org/r/20210716081449.22187-8-sj38.park@gmail.com Signed-off-by: SeongJae Park <sjpark@amazon.de> Reviewed-by: Leonard Foerster <foersleo@amazon.de> Reviewed-by: Fernand Sieber <sieberf@amazon.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Amit Shah <amit@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Brendan Higgins <brendanhiggins@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: David Woodhouse <dwmw@amazon.com> Cc: Fan Du <fan.du@intel.com> Cc: Greg Kroah-Hartman <greg@kroah.com> Cc: Greg Thelen <gthelen@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joe Perches <joe@perches.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Marco Elver <elver@google.com> Cc: Markus Boehme <markubo@amazon.de> Cc: Maximilian Heyne <mheyne@amazon.de> Cc: Mel Gorman <mgorman@suse.de> Cc: Minchan Kim <minchan@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@surriel.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-08 02:56:53 +00:00
ssize_t nr_targets;
ssize_t ret;
mm/damon: implement a debugfs-based user space interface DAMON is designed to be used by kernel space code such as the memory management subsystems, and therefore it provides only kernel space API. That said, letting the user space control DAMON could provide some benefits to them. For example, it will allow user space to analyze their specific workloads and make their own special optimizations. For such cases, this commit implements a simple DAMON application kernel module, namely 'damon-dbgfs', which merely wraps the DAMON api and exports those to the user space via the debugfs. 'damon-dbgfs' exports three files, ``attrs``, ``target_ids``, and ``monitor_on`` under its debugfs directory, ``<debugfs>/damon/``. Attributes ---------- Users can read and write the ``sampling interval``, ``aggregation interval``, ``regions update interval``, and min/max number of monitoring target regions by reading from and writing to the ``attrs`` file. For example, below commands set those values to 5 ms, 100 ms, 1,000 ms, 10, 1000 and check it again:: # cd <debugfs>/damon # echo 5000 100000 1000000 10 1000 > attrs # cat attrs 5000 100000 1000000 10 1000 Target IDs ---------- Some types of address spaces supports multiple monitoring target. For example, the virtual memory address spaces monitoring can have multiple processes as the monitoring targets. Users can set the targets by writing relevant id values of the targets to, and get the ids of the current targets by reading from the ``target_ids`` file. In case of the virtual address spaces monitoring, the values should be pids of the monitoring target processes. For example, below commands set processes having pids 42 and 4242 as the monitoring targets and check it again:: # cd <debugfs>/damon # echo 42 4242 > target_ids # cat target_ids 42 4242 Note that setting the target ids doesn't start the monitoring. Turning On/Off -------------- Setting the files as described above doesn't incur effect unless you explicitly start the monitoring. You can start, stop, and check the current status of the monitoring by writing to and reading from the ``monitor_on`` file. Writing ``on`` to the file starts the monitoring of the targets with the attributes. Writing ``off`` to the file stops those. DAMON also stops if every targets are invalidated (in case of the virtual memory monitoring, target processes are invalidated when terminated). Below example commands turn on, off, and check the status of DAMON:: # cd <debugfs>/damon # echo on > monitor_on # echo off > monitor_on # cat monitor_on off Please note that you cannot write to the above-mentioned debugfs files while the monitoring is turned on. If you write to the files while DAMON is running, an error code such as ``-EBUSY`` will be returned. [akpm@linux-foundation.org: remove unneeded "alloc failed" printks] [akpm@linux-foundation.org: replace macro with static inline] Link: https://lkml.kernel.org/r/20210716081449.22187-8-sj38.park@gmail.com Signed-off-by: SeongJae Park <sjpark@amazon.de> Reviewed-by: Leonard Foerster <foersleo@amazon.de> Reviewed-by: Fernand Sieber <sieberf@amazon.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Amit Shah <amit@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Brendan Higgins <brendanhiggins@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: David Woodhouse <dwmw@amazon.com> Cc: Fan Du <fan.du@intel.com> Cc: Greg Kroah-Hartman <greg@kroah.com> Cc: Greg Thelen <gthelen@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joe Perches <joe@perches.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Marco Elver <elver@google.com> Cc: Markus Boehme <markubo@amazon.de> Cc: Maximilian Heyne <mheyne@amazon.de> Cc: Mel Gorman <mgorman@suse.de> Cc: Minchan Kim <minchan@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@surriel.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-08 02:56:53 +00:00
kbuf = user_input_str(buf, count, ppos);
if (IS_ERR(kbuf))
return PTR_ERR(kbuf);
mm/damon/dbgfs: support physical memory monitoring This makes the 'damon-dbgfs' to support the physical memory monitoring, in addition to the virtual memory monitoring. Users can do the physical memory monitoring by writing a special keyword, 'paddr' to the 'target_ids' debugfs file. Then, DAMON will check the special keyword and configure the monitoring context to run with the primitives for the physical address space. Unlike the virtual memory monitoring, the monitoring target region will not be automatically set. Therefore, users should also set the monitoring target address region using the 'init_regions' debugfs file. Also, note that the physical memory monitoring will not automatically terminated. The user should explicitly turn off the monitoring by writing 'off' to the 'monitor_on' debugfs file. Link: https://lkml.kernel.org/r/20211012205711.29216-7-sj@kernel.org Signed-off-by: SeongJae Park <sj@kernel.org> Cc: Amit Shah <amit@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Brendan Higgins <brendanhiggins@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Rienjes <rientjes@google.com> Cc: David Woodhouse <dwmw@amazon.com> Cc: Greg Thelen <gthelen@google.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Leonard Foerster <foersleo@amazon.de> Cc: Marco Elver <elver@google.com> Cc: Markus Boehme <markubo@amazon.de> Cc: Shakeel Butt <shakeelb@google.com> Cc: Shuah Khan <shuah@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-11-05 20:47:00 +00:00
if (!strncmp(kbuf, "paddr\n", count)) {
id_is_pid = false;
nr_targets = 1;
mm/damon: implement a debugfs-based user space interface DAMON is designed to be used by kernel space code such as the memory management subsystems, and therefore it provides only kernel space API. That said, letting the user space control DAMON could provide some benefits to them. For example, it will allow user space to analyze their specific workloads and make their own special optimizations. For such cases, this commit implements a simple DAMON application kernel module, namely 'damon-dbgfs', which merely wraps the DAMON api and exports those to the user space via the debugfs. 'damon-dbgfs' exports three files, ``attrs``, ``target_ids``, and ``monitor_on`` under its debugfs directory, ``<debugfs>/damon/``. Attributes ---------- Users can read and write the ``sampling interval``, ``aggregation interval``, ``regions update interval``, and min/max number of monitoring target regions by reading from and writing to the ``attrs`` file. For example, below commands set those values to 5 ms, 100 ms, 1,000 ms, 10, 1000 and check it again:: # cd <debugfs>/damon # echo 5000 100000 1000000 10 1000 > attrs # cat attrs 5000 100000 1000000 10 1000 Target IDs ---------- Some types of address spaces supports multiple monitoring target. For example, the virtual memory address spaces monitoring can have multiple processes as the monitoring targets. Users can set the targets by writing relevant id values of the targets to, and get the ids of the current targets by reading from the ``target_ids`` file. In case of the virtual address spaces monitoring, the values should be pids of the monitoring target processes. For example, below commands set processes having pids 42 and 4242 as the monitoring targets and check it again:: # cd <debugfs>/damon # echo 42 4242 > target_ids # cat target_ids 42 4242 Note that setting the target ids doesn't start the monitoring. Turning On/Off -------------- Setting the files as described above doesn't incur effect unless you explicitly start the monitoring. You can start, stop, and check the current status of the monitoring by writing to and reading from the ``monitor_on`` file. Writing ``on`` to the file starts the monitoring of the targets with the attributes. Writing ``off`` to the file stops those. DAMON also stops if every targets are invalidated (in case of the virtual memory monitoring, target processes are invalidated when terminated). Below example commands turn on, off, and check the status of DAMON:: # cd <debugfs>/damon # echo on > monitor_on # echo off > monitor_on # cat monitor_on off Please note that you cannot write to the above-mentioned debugfs files while the monitoring is turned on. If you write to the files while DAMON is running, an error code such as ``-EBUSY`` will be returned. [akpm@linux-foundation.org: remove unneeded "alloc failed" printks] [akpm@linux-foundation.org: replace macro with static inline] Link: https://lkml.kernel.org/r/20210716081449.22187-8-sj38.park@gmail.com Signed-off-by: SeongJae Park <sjpark@amazon.de> Reviewed-by: Leonard Foerster <foersleo@amazon.de> Reviewed-by: Fernand Sieber <sieberf@amazon.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Amit Shah <amit@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Brendan Higgins <brendanhiggins@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: David Woodhouse <dwmw@amazon.com> Cc: Fan Du <fan.du@intel.com> Cc: Greg Kroah-Hartman <greg@kroah.com> Cc: Greg Thelen <gthelen@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joe Perches <joe@perches.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Marco Elver <elver@google.com> Cc: Markus Boehme <markubo@amazon.de> Cc: Maximilian Heyne <mheyne@amazon.de> Cc: Mel Gorman <mgorman@suse.de> Cc: Minchan Kim <minchan@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@surriel.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-08 02:56:53 +00:00
}
mm/damon/dbgfs: support physical memory monitoring This makes the 'damon-dbgfs' to support the physical memory monitoring, in addition to the virtual memory monitoring. Users can do the physical memory monitoring by writing a special keyword, 'paddr' to the 'target_ids' debugfs file. Then, DAMON will check the special keyword and configure the monitoring context to run with the primitives for the physical address space. Unlike the virtual memory monitoring, the monitoring target region will not be automatically set. Therefore, users should also set the monitoring target address region using the 'init_regions' debugfs file. Also, note that the physical memory monitoring will not automatically terminated. The user should explicitly turn off the monitoring by writing 'off' to the 'monitor_on' debugfs file. Link: https://lkml.kernel.org/r/20211012205711.29216-7-sj@kernel.org Signed-off-by: SeongJae Park <sj@kernel.org> Cc: Amit Shah <amit@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Brendan Higgins <brendanhiggins@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Rienjes <rientjes@google.com> Cc: David Woodhouse <dwmw@amazon.com> Cc: Greg Thelen <gthelen@google.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Leonard Foerster <foersleo@amazon.de> Cc: Marco Elver <elver@google.com> Cc: Markus Boehme <markubo@amazon.de> Cc: Shakeel Butt <shakeelb@google.com> Cc: Shuah Khan <shuah@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-11-05 20:47:00 +00:00
if (id_is_pid) {
target_pids = str_to_pids(kbuf, count, &nr_targets);
if (!target_pids) {
ret = -ENOMEM;
goto out;
mm/damon: implement a debugfs-based user space interface DAMON is designed to be used by kernel space code such as the memory management subsystems, and therefore it provides only kernel space API. That said, letting the user space control DAMON could provide some benefits to them. For example, it will allow user space to analyze their specific workloads and make their own special optimizations. For such cases, this commit implements a simple DAMON application kernel module, namely 'damon-dbgfs', which merely wraps the DAMON api and exports those to the user space via the debugfs. 'damon-dbgfs' exports three files, ``attrs``, ``target_ids``, and ``monitor_on`` under its debugfs directory, ``<debugfs>/damon/``. Attributes ---------- Users can read and write the ``sampling interval``, ``aggregation interval``, ``regions update interval``, and min/max number of monitoring target regions by reading from and writing to the ``attrs`` file. For example, below commands set those values to 5 ms, 100 ms, 1,000 ms, 10, 1000 and check it again:: # cd <debugfs>/damon # echo 5000 100000 1000000 10 1000 > attrs # cat attrs 5000 100000 1000000 10 1000 Target IDs ---------- Some types of address spaces supports multiple monitoring target. For example, the virtual memory address spaces monitoring can have multiple processes as the monitoring targets. Users can set the targets by writing relevant id values of the targets to, and get the ids of the current targets by reading from the ``target_ids`` file. In case of the virtual address spaces monitoring, the values should be pids of the monitoring target processes. For example, below commands set processes having pids 42 and 4242 as the monitoring targets and check it again:: # cd <debugfs>/damon # echo 42 4242 > target_ids # cat target_ids 42 4242 Note that setting the target ids doesn't start the monitoring. Turning On/Off -------------- Setting the files as described above doesn't incur effect unless you explicitly start the monitoring. You can start, stop, and check the current status of the monitoring by writing to and reading from the ``monitor_on`` file. Writing ``on`` to the file starts the monitoring of the targets with the attributes. Writing ``off`` to the file stops those. DAMON also stops if every targets are invalidated (in case of the virtual memory monitoring, target processes are invalidated when terminated). Below example commands turn on, off, and check the status of DAMON:: # cd <debugfs>/damon # echo on > monitor_on # echo off > monitor_on # cat monitor_on off Please note that you cannot write to the above-mentioned debugfs files while the monitoring is turned on. If you write to the files while DAMON is running, an error code such as ``-EBUSY`` will be returned. [akpm@linux-foundation.org: remove unneeded "alloc failed" printks] [akpm@linux-foundation.org: replace macro with static inline] Link: https://lkml.kernel.org/r/20210716081449.22187-8-sj38.park@gmail.com Signed-off-by: SeongJae Park <sjpark@amazon.de> Reviewed-by: Leonard Foerster <foersleo@amazon.de> Reviewed-by: Fernand Sieber <sieberf@amazon.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Amit Shah <amit@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Brendan Higgins <brendanhiggins@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: David Woodhouse <dwmw@amazon.com> Cc: Fan Du <fan.du@intel.com> Cc: Greg Kroah-Hartman <greg@kroah.com> Cc: Greg Thelen <gthelen@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joe Perches <joe@perches.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Marco Elver <elver@google.com> Cc: Markus Boehme <markubo@amazon.de> Cc: Maximilian Heyne <mheyne@amazon.de> Cc: Mel Gorman <mgorman@suse.de> Cc: Minchan Kim <minchan@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@surriel.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-08 02:56:53 +00:00
}
}
mutex_lock(&ctx->kdamond_lock);
if (ctx->kdamond) {
mm/damon/dbgfs: support physical memory monitoring This makes the 'damon-dbgfs' to support the physical memory monitoring, in addition to the virtual memory monitoring. Users can do the physical memory monitoring by writing a special keyword, 'paddr' to the 'target_ids' debugfs file. Then, DAMON will check the special keyword and configure the monitoring context to run with the primitives for the physical address space. Unlike the virtual memory monitoring, the monitoring target region will not be automatically set. Therefore, users should also set the monitoring target address region using the 'init_regions' debugfs file. Also, note that the physical memory monitoring will not automatically terminated. The user should explicitly turn off the monitoring by writing 'off' to the 'monitor_on' debugfs file. Link: https://lkml.kernel.org/r/20211012205711.29216-7-sj@kernel.org Signed-off-by: SeongJae Park <sj@kernel.org> Cc: Amit Shah <amit@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Brendan Higgins <brendanhiggins@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Rienjes <rientjes@google.com> Cc: David Woodhouse <dwmw@amazon.com> Cc: Greg Thelen <gthelen@google.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Leonard Foerster <foersleo@amazon.de> Cc: Marco Elver <elver@google.com> Cc: Markus Boehme <markubo@amazon.de> Cc: Shakeel Butt <shakeelb@google.com> Cc: Shuah Khan <shuah@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-11-05 20:47:00 +00:00
if (id_is_pid)
dbgfs_put_pids(target_pids, nr_targets);
mm/damon: implement a debugfs-based user space interface DAMON is designed to be used by kernel space code such as the memory management subsystems, and therefore it provides only kernel space API. That said, letting the user space control DAMON could provide some benefits to them. For example, it will allow user space to analyze their specific workloads and make their own special optimizations. For such cases, this commit implements a simple DAMON application kernel module, namely 'damon-dbgfs', which merely wraps the DAMON api and exports those to the user space via the debugfs. 'damon-dbgfs' exports three files, ``attrs``, ``target_ids``, and ``monitor_on`` under its debugfs directory, ``<debugfs>/damon/``. Attributes ---------- Users can read and write the ``sampling interval``, ``aggregation interval``, ``regions update interval``, and min/max number of monitoring target regions by reading from and writing to the ``attrs`` file. For example, below commands set those values to 5 ms, 100 ms, 1,000 ms, 10, 1000 and check it again:: # cd <debugfs>/damon # echo 5000 100000 1000000 10 1000 > attrs # cat attrs 5000 100000 1000000 10 1000 Target IDs ---------- Some types of address spaces supports multiple monitoring target. For example, the virtual memory address spaces monitoring can have multiple processes as the monitoring targets. Users can set the targets by writing relevant id values of the targets to, and get the ids of the current targets by reading from the ``target_ids`` file. In case of the virtual address spaces monitoring, the values should be pids of the monitoring target processes. For example, below commands set processes having pids 42 and 4242 as the monitoring targets and check it again:: # cd <debugfs>/damon # echo 42 4242 > target_ids # cat target_ids 42 4242 Note that setting the target ids doesn't start the monitoring. Turning On/Off -------------- Setting the files as described above doesn't incur effect unless you explicitly start the monitoring. You can start, stop, and check the current status of the monitoring by writing to and reading from the ``monitor_on`` file. Writing ``on`` to the file starts the monitoring of the targets with the attributes. Writing ``off`` to the file stops those. DAMON also stops if every targets are invalidated (in case of the virtual memory monitoring, target processes are invalidated when terminated). Below example commands turn on, off, and check the status of DAMON:: # cd <debugfs>/damon # echo on > monitor_on # echo off > monitor_on # cat monitor_on off Please note that you cannot write to the above-mentioned debugfs files while the monitoring is turned on. If you write to the files while DAMON is running, an error code such as ``-EBUSY`` will be returned. [akpm@linux-foundation.org: remove unneeded "alloc failed" printks] [akpm@linux-foundation.org: replace macro with static inline] Link: https://lkml.kernel.org/r/20210716081449.22187-8-sj38.park@gmail.com Signed-off-by: SeongJae Park <sjpark@amazon.de> Reviewed-by: Leonard Foerster <foersleo@amazon.de> Reviewed-by: Fernand Sieber <sieberf@amazon.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Amit Shah <amit@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Brendan Higgins <brendanhiggins@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: David Woodhouse <dwmw@amazon.com> Cc: Fan Du <fan.du@intel.com> Cc: Greg Kroah-Hartman <greg@kroah.com> Cc: Greg Thelen <gthelen@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joe Perches <joe@perches.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Marco Elver <elver@google.com> Cc: Markus Boehme <markubo@amazon.de> Cc: Maximilian Heyne <mheyne@amazon.de> Cc: Mel Gorman <mgorman@suse.de> Cc: Minchan Kim <minchan@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@surriel.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-08 02:56:53 +00:00
ret = -EBUSY;
goto unlock_out;
}
/* remove previously set targets */
dbgfs_set_targets(ctx, 0, NULL);
if (!nr_targets) {
ret = count;
goto unlock_out;
}
mm/damon/dbgfs: support physical memory monitoring This makes the 'damon-dbgfs' to support the physical memory monitoring, in addition to the virtual memory monitoring. Users can do the physical memory monitoring by writing a special keyword, 'paddr' to the 'target_ids' debugfs file. Then, DAMON will check the special keyword and configure the monitoring context to run with the primitives for the physical address space. Unlike the virtual memory monitoring, the monitoring target region will not be automatically set. Therefore, users should also set the monitoring target address region using the 'init_regions' debugfs file. Also, note that the physical memory monitoring will not automatically terminated. The user should explicitly turn off the monitoring by writing 'off' to the 'monitor_on' debugfs file. Link: https://lkml.kernel.org/r/20211012205711.29216-7-sj@kernel.org Signed-off-by: SeongJae Park <sj@kernel.org> Cc: Amit Shah <amit@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Brendan Higgins <brendanhiggins@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Rienjes <rientjes@google.com> Cc: David Woodhouse <dwmw@amazon.com> Cc: Greg Thelen <gthelen@google.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Leonard Foerster <foersleo@amazon.de> Cc: Marco Elver <elver@google.com> Cc: Markus Boehme <markubo@amazon.de> Cc: Shakeel Butt <shakeelb@google.com> Cc: Shuah Khan <shuah@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-11-05 20:47:00 +00:00
/* Configure the context for the address space type */
if (id_is_pid)
ret = damon_select_ops(ctx, DAMON_OPS_VADDR);
mm/damon/dbgfs: support physical memory monitoring This makes the 'damon-dbgfs' to support the physical memory monitoring, in addition to the virtual memory monitoring. Users can do the physical memory monitoring by writing a special keyword, 'paddr' to the 'target_ids' debugfs file. Then, DAMON will check the special keyword and configure the monitoring context to run with the primitives for the physical address space. Unlike the virtual memory monitoring, the monitoring target region will not be automatically set. Therefore, users should also set the monitoring target address region using the 'init_regions' debugfs file. Also, note that the physical memory monitoring will not automatically terminated. The user should explicitly turn off the monitoring by writing 'off' to the 'monitor_on' debugfs file. Link: https://lkml.kernel.org/r/20211012205711.29216-7-sj@kernel.org Signed-off-by: SeongJae Park <sj@kernel.org> Cc: Amit Shah <amit@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Brendan Higgins <brendanhiggins@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Rienjes <rientjes@google.com> Cc: David Woodhouse <dwmw@amazon.com> Cc: Greg Thelen <gthelen@google.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Leonard Foerster <foersleo@amazon.de> Cc: Marco Elver <elver@google.com> Cc: Markus Boehme <markubo@amazon.de> Cc: Shakeel Butt <shakeelb@google.com> Cc: Shuah Khan <shuah@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-11-05 20:47:00 +00:00
else
ret = damon_select_ops(ctx, DAMON_OPS_PADDR);
if (ret)
goto unlock_out;
mm/damon/dbgfs: support physical memory monitoring This makes the 'damon-dbgfs' to support the physical memory monitoring, in addition to the virtual memory monitoring. Users can do the physical memory monitoring by writing a special keyword, 'paddr' to the 'target_ids' debugfs file. Then, DAMON will check the special keyword and configure the monitoring context to run with the primitives for the physical address space. Unlike the virtual memory monitoring, the monitoring target region will not be automatically set. Therefore, users should also set the monitoring target address region using the 'init_regions' debugfs file. Also, note that the physical memory monitoring will not automatically terminated. The user should explicitly turn off the monitoring by writing 'off' to the 'monitor_on' debugfs file. Link: https://lkml.kernel.org/r/20211012205711.29216-7-sj@kernel.org Signed-off-by: SeongJae Park <sj@kernel.org> Cc: Amit Shah <amit@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Brendan Higgins <brendanhiggins@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Rienjes <rientjes@google.com> Cc: David Woodhouse <dwmw@amazon.com> Cc: Greg Thelen <gthelen@google.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Leonard Foerster <foersleo@amazon.de> Cc: Marco Elver <elver@google.com> Cc: Markus Boehme <markubo@amazon.de> Cc: Shakeel Butt <shakeelb@google.com> Cc: Shuah Khan <shuah@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-11-05 20:47:00 +00:00
ret = dbgfs_set_targets(ctx, nr_targets, target_pids);
if (!ret)
ret = count;
mm/damon: implement a debugfs-based user space interface DAMON is designed to be used by kernel space code such as the memory management subsystems, and therefore it provides only kernel space API. That said, letting the user space control DAMON could provide some benefits to them. For example, it will allow user space to analyze their specific workloads and make their own special optimizations. For such cases, this commit implements a simple DAMON application kernel module, namely 'damon-dbgfs', which merely wraps the DAMON api and exports those to the user space via the debugfs. 'damon-dbgfs' exports three files, ``attrs``, ``target_ids``, and ``monitor_on`` under its debugfs directory, ``<debugfs>/damon/``. Attributes ---------- Users can read and write the ``sampling interval``, ``aggregation interval``, ``regions update interval``, and min/max number of monitoring target regions by reading from and writing to the ``attrs`` file. For example, below commands set those values to 5 ms, 100 ms, 1,000 ms, 10, 1000 and check it again:: # cd <debugfs>/damon # echo 5000 100000 1000000 10 1000 > attrs # cat attrs 5000 100000 1000000 10 1000 Target IDs ---------- Some types of address spaces supports multiple monitoring target. For example, the virtual memory address spaces monitoring can have multiple processes as the monitoring targets. Users can set the targets by writing relevant id values of the targets to, and get the ids of the current targets by reading from the ``target_ids`` file. In case of the virtual address spaces monitoring, the values should be pids of the monitoring target processes. For example, below commands set processes having pids 42 and 4242 as the monitoring targets and check it again:: # cd <debugfs>/damon # echo 42 4242 > target_ids # cat target_ids 42 4242 Note that setting the target ids doesn't start the monitoring. Turning On/Off -------------- Setting the files as described above doesn't incur effect unless you explicitly start the monitoring. You can start, stop, and check the current status of the monitoring by writing to and reading from the ``monitor_on`` file. Writing ``on`` to the file starts the monitoring of the targets with the attributes. Writing ``off`` to the file stops those. DAMON also stops if every targets are invalidated (in case of the virtual memory monitoring, target processes are invalidated when terminated). Below example commands turn on, off, and check the status of DAMON:: # cd <debugfs>/damon # echo on > monitor_on # echo off > monitor_on # cat monitor_on off Please note that you cannot write to the above-mentioned debugfs files while the monitoring is turned on. If you write to the files while DAMON is running, an error code such as ``-EBUSY`` will be returned. [akpm@linux-foundation.org: remove unneeded "alloc failed" printks] [akpm@linux-foundation.org: replace macro with static inline] Link: https://lkml.kernel.org/r/20210716081449.22187-8-sj38.park@gmail.com Signed-off-by: SeongJae Park <sjpark@amazon.de> Reviewed-by: Leonard Foerster <foersleo@amazon.de> Reviewed-by: Fernand Sieber <sieberf@amazon.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Amit Shah <amit@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Brendan Higgins <brendanhiggins@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: David Woodhouse <dwmw@amazon.com> Cc: Fan Du <fan.du@intel.com> Cc: Greg Kroah-Hartman <greg@kroah.com> Cc: Greg Thelen <gthelen@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joe Perches <joe@perches.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Marco Elver <elver@google.com> Cc: Markus Boehme <markubo@amazon.de> Cc: Maximilian Heyne <mheyne@amazon.de> Cc: Mel Gorman <mgorman@suse.de> Cc: Minchan Kim <minchan@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@surriel.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-08 02:56:53 +00:00
unlock_out:
mutex_unlock(&ctx->kdamond_lock);
kfree(target_pids);
mm/damon: implement a debugfs-based user space interface DAMON is designed to be used by kernel space code such as the memory management subsystems, and therefore it provides only kernel space API. That said, letting the user space control DAMON could provide some benefits to them. For example, it will allow user space to analyze their specific workloads and make their own special optimizations. For such cases, this commit implements a simple DAMON application kernel module, namely 'damon-dbgfs', which merely wraps the DAMON api and exports those to the user space via the debugfs. 'damon-dbgfs' exports three files, ``attrs``, ``target_ids``, and ``monitor_on`` under its debugfs directory, ``<debugfs>/damon/``. Attributes ---------- Users can read and write the ``sampling interval``, ``aggregation interval``, ``regions update interval``, and min/max number of monitoring target regions by reading from and writing to the ``attrs`` file. For example, below commands set those values to 5 ms, 100 ms, 1,000 ms, 10, 1000 and check it again:: # cd <debugfs>/damon # echo 5000 100000 1000000 10 1000 > attrs # cat attrs 5000 100000 1000000 10 1000 Target IDs ---------- Some types of address spaces supports multiple monitoring target. For example, the virtual memory address spaces monitoring can have multiple processes as the monitoring targets. Users can set the targets by writing relevant id values of the targets to, and get the ids of the current targets by reading from the ``target_ids`` file. In case of the virtual address spaces monitoring, the values should be pids of the monitoring target processes. For example, below commands set processes having pids 42 and 4242 as the monitoring targets and check it again:: # cd <debugfs>/damon # echo 42 4242 > target_ids # cat target_ids 42 4242 Note that setting the target ids doesn't start the monitoring. Turning On/Off -------------- Setting the files as described above doesn't incur effect unless you explicitly start the monitoring. You can start, stop, and check the current status of the monitoring by writing to and reading from the ``monitor_on`` file. Writing ``on`` to the file starts the monitoring of the targets with the attributes. Writing ``off`` to the file stops those. DAMON also stops if every targets are invalidated (in case of the virtual memory monitoring, target processes are invalidated when terminated). Below example commands turn on, off, and check the status of DAMON:: # cd <debugfs>/damon # echo on > monitor_on # echo off > monitor_on # cat monitor_on off Please note that you cannot write to the above-mentioned debugfs files while the monitoring is turned on. If you write to the files while DAMON is running, an error code such as ``-EBUSY`` will be returned. [akpm@linux-foundation.org: remove unneeded "alloc failed" printks] [akpm@linux-foundation.org: replace macro with static inline] Link: https://lkml.kernel.org/r/20210716081449.22187-8-sj38.park@gmail.com Signed-off-by: SeongJae Park <sjpark@amazon.de> Reviewed-by: Leonard Foerster <foersleo@amazon.de> Reviewed-by: Fernand Sieber <sieberf@amazon.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Amit Shah <amit@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Brendan Higgins <brendanhiggins@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: David Woodhouse <dwmw@amazon.com> Cc: Fan Du <fan.du@intel.com> Cc: Greg Kroah-Hartman <greg@kroah.com> Cc: Greg Thelen <gthelen@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joe Perches <joe@perches.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Marco Elver <elver@google.com> Cc: Markus Boehme <markubo@amazon.de> Cc: Maximilian Heyne <mheyne@amazon.de> Cc: Mel Gorman <mgorman@suse.de> Cc: Minchan Kim <minchan@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@surriel.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-08 02:56:53 +00:00
out:
kfree(kbuf);
return ret;
}
mm/damon/dbgfs: allow users to set initial monitoring target regions Patch series "DAMON: Support Physical Memory Address Space Monitoring:. DAMON currently supports only virtual address spaces monitoring. It can be easily extended for various use cases and address spaces by configuring its monitoring primitives layer to use appropriate primitives implementations, though. This patchset implements monitoring primitives for the physical address space monitoring using the structure. The first 3 patches allow the user space users manually set the monitoring regions. The 1st patch implements the feature in the 'damon-dbgfs'. Then, patches for adding a unit tests (the 2nd patch) and updating the documentation (the 3rd patch) follow. Following 4 patches implement the physical address space monitoring primitives. The 4th patch makes some primitive functions for the virtual address spaces primitives reusable. The 5th patch implements the physical address space monitoring primitives. The 6th patch links the primitives to the 'damon-dbgfs'. Finally, 7th patch documents this new features. This patch (of 7): Some 'damon-dbgfs' users would want to monitor only a part of the entire virtual memory address space. The program interface users in the kernel space could use '->before_start()' callback or set the regions inside the context struct as they want, but 'damon-dbgfs' users cannot. For that reason, this introduces a new debugfs file called 'init_region'. 'damon-dbgfs' users can specify which initial monitoring target address regions they want by writing special input to the file. The input should describe each region in each line in the below form: <pid> <start address> <end address> Note that the regions will be updated to cover entire memory mapped regions after a 'regions update interval' is passed. If you want the regions to not be updated after the initial setting, you could set the interval as a very long time, say, a few decades. Link: https://lkml.kernel.org/r/20211012205711.29216-1-sj@kernel.org Link: https://lkml.kernel.org/r/20211012205711.29216-2-sj@kernel.org Signed-off-by: SeongJae Park <sj@kernel.org> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Amit Shah <amit@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Jonathan Corbet <corbet@lwn.net> Cc: David Hildenbrand <david@redhat.com> Cc: David Woodhouse <dwmw@amazon.com> Cc: Marco Elver <elver@google.com> Cc: Leonard Foerster <foersleo@amazon.de> Cc: Greg Thelen <gthelen@google.com> Cc: Markus Boehme <markubo@amazon.de> Cc: David Rienjes <rientjes@google.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Brendan Higgins <brendanhiggins@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-11-05 20:46:42 +00:00
static ssize_t sprint_init_regions(struct damon_ctx *c, char *buf, ssize_t len)
{
struct damon_target *t;
struct damon_region *r;
mm/damon/dbgfs/init_regions: use target index instead of target id Patch series "Remove the type-unclear target id concept". DAMON asks each monitoring target ('struct damon_target') to have one 'unsigned long' integer called 'id', which should be unique among the targets of same monitoring context. Meaning of it is, however, totally up to the monitoring primitives that registered to the monitoring context. For example, the virtual address spaces monitoring primitives treats the id as a 'struct pid' pointer. This makes the code flexible but ugly, not well-documented, and type-unsafe[1]. Also, identification of each target can be done via its index. For the reason, this patchset removes the concept and uses clear type definition. [1] https://lore.kernel.org/linux-mm/20211013154535.4aaeaaf9d0182922e405dd1e@linux-foundation.org/ This patch (of 4): Target id is a 'unsigned long' data, which can be interpreted differently by each monitoring primitives. For example, it means 'struct pid *' for the virtual address spaces monitoring, while it means nothing but an integer to be displayed to debugfs interface users for the physical address space monitoring. It's flexible but makes code ugly and type-unsafe[1]. To be prepared for eventual removal of the concept, this commit removes a use case of the concept in 'init_regions' debugfs file handling. In detail, this commit replaces use of the id with the index of each target in the context's targets list. [1] https://lore.kernel.org/linux-mm/20211013154535.4aaeaaf9d0182922e405dd1e@linux-foundation.org/ Link: https://lkml.kernel.org/r/20211230100723.2238-1-sj@kernel.org Link: https://lkml.kernel.org/r/20211230100723.2238-2-sj@kernel.org Signed-off-by: SeongJae Park <sj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-03-22 21:48:31 +00:00
int target_idx = 0;
mm/damon/dbgfs: allow users to set initial monitoring target regions Patch series "DAMON: Support Physical Memory Address Space Monitoring:. DAMON currently supports only virtual address spaces monitoring. It can be easily extended for various use cases and address spaces by configuring its monitoring primitives layer to use appropriate primitives implementations, though. This patchset implements monitoring primitives for the physical address space monitoring using the structure. The first 3 patches allow the user space users manually set the monitoring regions. The 1st patch implements the feature in the 'damon-dbgfs'. Then, patches for adding a unit tests (the 2nd patch) and updating the documentation (the 3rd patch) follow. Following 4 patches implement the physical address space monitoring primitives. The 4th patch makes some primitive functions for the virtual address spaces primitives reusable. The 5th patch implements the physical address space monitoring primitives. The 6th patch links the primitives to the 'damon-dbgfs'. Finally, 7th patch documents this new features. This patch (of 7): Some 'damon-dbgfs' users would want to monitor only a part of the entire virtual memory address space. The program interface users in the kernel space could use '->before_start()' callback or set the regions inside the context struct as they want, but 'damon-dbgfs' users cannot. For that reason, this introduces a new debugfs file called 'init_region'. 'damon-dbgfs' users can specify which initial monitoring target address regions they want by writing special input to the file. The input should describe each region in each line in the below form: <pid> <start address> <end address> Note that the regions will be updated to cover entire memory mapped regions after a 'regions update interval' is passed. If you want the regions to not be updated after the initial setting, you could set the interval as a very long time, say, a few decades. Link: https://lkml.kernel.org/r/20211012205711.29216-1-sj@kernel.org Link: https://lkml.kernel.org/r/20211012205711.29216-2-sj@kernel.org Signed-off-by: SeongJae Park <sj@kernel.org> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Amit Shah <amit@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Jonathan Corbet <corbet@lwn.net> Cc: David Hildenbrand <david@redhat.com> Cc: David Woodhouse <dwmw@amazon.com> Cc: Marco Elver <elver@google.com> Cc: Leonard Foerster <foersleo@amazon.de> Cc: Greg Thelen <gthelen@google.com> Cc: Markus Boehme <markubo@amazon.de> Cc: David Rienjes <rientjes@google.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Brendan Higgins <brendanhiggins@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-11-05 20:46:42 +00:00
int written = 0;
int rc;
damon_for_each_target(t, c) {
damon_for_each_region(r, t) {
rc = scnprintf(&buf[written], len - written,
mm/damon/dbgfs/init_regions: use target index instead of target id Patch series "Remove the type-unclear target id concept". DAMON asks each monitoring target ('struct damon_target') to have one 'unsigned long' integer called 'id', which should be unique among the targets of same monitoring context. Meaning of it is, however, totally up to the monitoring primitives that registered to the monitoring context. For example, the virtual address spaces monitoring primitives treats the id as a 'struct pid' pointer. This makes the code flexible but ugly, not well-documented, and type-unsafe[1]. Also, identification of each target can be done via its index. For the reason, this patchset removes the concept and uses clear type definition. [1] https://lore.kernel.org/linux-mm/20211013154535.4aaeaaf9d0182922e405dd1e@linux-foundation.org/ This patch (of 4): Target id is a 'unsigned long' data, which can be interpreted differently by each monitoring primitives. For example, it means 'struct pid *' for the virtual address spaces monitoring, while it means nothing but an integer to be displayed to debugfs interface users for the physical address space monitoring. It's flexible but makes code ugly and type-unsafe[1]. To be prepared for eventual removal of the concept, this commit removes a use case of the concept in 'init_regions' debugfs file handling. In detail, this commit replaces use of the id with the index of each target in the context's targets list. [1] https://lore.kernel.org/linux-mm/20211013154535.4aaeaaf9d0182922e405dd1e@linux-foundation.org/ Link: https://lkml.kernel.org/r/20211230100723.2238-1-sj@kernel.org Link: https://lkml.kernel.org/r/20211230100723.2238-2-sj@kernel.org Signed-off-by: SeongJae Park <sj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-03-22 21:48:31 +00:00
"%d %lu %lu\n",
target_idx, r->ar.start, r->ar.end);
mm/damon/dbgfs: allow users to set initial monitoring target regions Patch series "DAMON: Support Physical Memory Address Space Monitoring:. DAMON currently supports only virtual address spaces monitoring. It can be easily extended for various use cases and address spaces by configuring its monitoring primitives layer to use appropriate primitives implementations, though. This patchset implements monitoring primitives for the physical address space monitoring using the structure. The first 3 patches allow the user space users manually set the monitoring regions. The 1st patch implements the feature in the 'damon-dbgfs'. Then, patches for adding a unit tests (the 2nd patch) and updating the documentation (the 3rd patch) follow. Following 4 patches implement the physical address space monitoring primitives. The 4th patch makes some primitive functions for the virtual address spaces primitives reusable. The 5th patch implements the physical address space monitoring primitives. The 6th patch links the primitives to the 'damon-dbgfs'. Finally, 7th patch documents this new features. This patch (of 7): Some 'damon-dbgfs' users would want to monitor only a part of the entire virtual memory address space. The program interface users in the kernel space could use '->before_start()' callback or set the regions inside the context struct as they want, but 'damon-dbgfs' users cannot. For that reason, this introduces a new debugfs file called 'init_region'. 'damon-dbgfs' users can specify which initial monitoring target address regions they want by writing special input to the file. The input should describe each region in each line in the below form: <pid> <start address> <end address> Note that the regions will be updated to cover entire memory mapped regions after a 'regions update interval' is passed. If you want the regions to not be updated after the initial setting, you could set the interval as a very long time, say, a few decades. Link: https://lkml.kernel.org/r/20211012205711.29216-1-sj@kernel.org Link: https://lkml.kernel.org/r/20211012205711.29216-2-sj@kernel.org Signed-off-by: SeongJae Park <sj@kernel.org> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Amit Shah <amit@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Jonathan Corbet <corbet@lwn.net> Cc: David Hildenbrand <david@redhat.com> Cc: David Woodhouse <dwmw@amazon.com> Cc: Marco Elver <elver@google.com> Cc: Leonard Foerster <foersleo@amazon.de> Cc: Greg Thelen <gthelen@google.com> Cc: Markus Boehme <markubo@amazon.de> Cc: David Rienjes <rientjes@google.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Brendan Higgins <brendanhiggins@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-11-05 20:46:42 +00:00
if (!rc)
return -ENOMEM;
written += rc;
}
mm/damon/dbgfs/init_regions: use target index instead of target id Patch series "Remove the type-unclear target id concept". DAMON asks each monitoring target ('struct damon_target') to have one 'unsigned long' integer called 'id', which should be unique among the targets of same monitoring context. Meaning of it is, however, totally up to the monitoring primitives that registered to the monitoring context. For example, the virtual address spaces monitoring primitives treats the id as a 'struct pid' pointer. This makes the code flexible but ugly, not well-documented, and type-unsafe[1]. Also, identification of each target can be done via its index. For the reason, this patchset removes the concept and uses clear type definition. [1] https://lore.kernel.org/linux-mm/20211013154535.4aaeaaf9d0182922e405dd1e@linux-foundation.org/ This patch (of 4): Target id is a 'unsigned long' data, which can be interpreted differently by each monitoring primitives. For example, it means 'struct pid *' for the virtual address spaces monitoring, while it means nothing but an integer to be displayed to debugfs interface users for the physical address space monitoring. It's flexible but makes code ugly and type-unsafe[1]. To be prepared for eventual removal of the concept, this commit removes a use case of the concept in 'init_regions' debugfs file handling. In detail, this commit replaces use of the id with the index of each target in the context's targets list. [1] https://lore.kernel.org/linux-mm/20211013154535.4aaeaaf9d0182922e405dd1e@linux-foundation.org/ Link: https://lkml.kernel.org/r/20211230100723.2238-1-sj@kernel.org Link: https://lkml.kernel.org/r/20211230100723.2238-2-sj@kernel.org Signed-off-by: SeongJae Park <sj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-03-22 21:48:31 +00:00
target_idx++;
mm/damon/dbgfs: allow users to set initial monitoring target regions Patch series "DAMON: Support Physical Memory Address Space Monitoring:. DAMON currently supports only virtual address spaces monitoring. It can be easily extended for various use cases and address spaces by configuring its monitoring primitives layer to use appropriate primitives implementations, though. This patchset implements monitoring primitives for the physical address space monitoring using the structure. The first 3 patches allow the user space users manually set the monitoring regions. The 1st patch implements the feature in the 'damon-dbgfs'. Then, patches for adding a unit tests (the 2nd patch) and updating the documentation (the 3rd patch) follow. Following 4 patches implement the physical address space monitoring primitives. The 4th patch makes some primitive functions for the virtual address spaces primitives reusable. The 5th patch implements the physical address space monitoring primitives. The 6th patch links the primitives to the 'damon-dbgfs'. Finally, 7th patch documents this new features. This patch (of 7): Some 'damon-dbgfs' users would want to monitor only a part of the entire virtual memory address space. The program interface users in the kernel space could use '->before_start()' callback or set the regions inside the context struct as they want, but 'damon-dbgfs' users cannot. For that reason, this introduces a new debugfs file called 'init_region'. 'damon-dbgfs' users can specify which initial monitoring target address regions they want by writing special input to the file. The input should describe each region in each line in the below form: <pid> <start address> <end address> Note that the regions will be updated to cover entire memory mapped regions after a 'regions update interval' is passed. If you want the regions to not be updated after the initial setting, you could set the interval as a very long time, say, a few decades. Link: https://lkml.kernel.org/r/20211012205711.29216-1-sj@kernel.org Link: https://lkml.kernel.org/r/20211012205711.29216-2-sj@kernel.org Signed-off-by: SeongJae Park <sj@kernel.org> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Amit Shah <amit@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Jonathan Corbet <corbet@lwn.net> Cc: David Hildenbrand <david@redhat.com> Cc: David Woodhouse <dwmw@amazon.com> Cc: Marco Elver <elver@google.com> Cc: Leonard Foerster <foersleo@amazon.de> Cc: Greg Thelen <gthelen@google.com> Cc: Markus Boehme <markubo@amazon.de> Cc: David Rienjes <rientjes@google.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Brendan Higgins <brendanhiggins@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-11-05 20:46:42 +00:00
}
return written;
}
static ssize_t dbgfs_init_regions_read(struct file *file, char __user *buf,
size_t count, loff_t *ppos)
{
struct damon_ctx *ctx = file->private_data;
char *kbuf;
ssize_t len;
kbuf = kmalloc(count, GFP_KERNEL | __GFP_NOWARN);
mm/damon/dbgfs: allow users to set initial monitoring target regions Patch series "DAMON: Support Physical Memory Address Space Monitoring:. DAMON currently supports only virtual address spaces monitoring. It can be easily extended for various use cases and address spaces by configuring its monitoring primitives layer to use appropriate primitives implementations, though. This patchset implements monitoring primitives for the physical address space monitoring using the structure. The first 3 patches allow the user space users manually set the monitoring regions. The 1st patch implements the feature in the 'damon-dbgfs'. Then, patches for adding a unit tests (the 2nd patch) and updating the documentation (the 3rd patch) follow. Following 4 patches implement the physical address space monitoring primitives. The 4th patch makes some primitive functions for the virtual address spaces primitives reusable. The 5th patch implements the physical address space monitoring primitives. The 6th patch links the primitives to the 'damon-dbgfs'. Finally, 7th patch documents this new features. This patch (of 7): Some 'damon-dbgfs' users would want to monitor only a part of the entire virtual memory address space. The program interface users in the kernel space could use '->before_start()' callback or set the regions inside the context struct as they want, but 'damon-dbgfs' users cannot. For that reason, this introduces a new debugfs file called 'init_region'. 'damon-dbgfs' users can specify which initial monitoring target address regions they want by writing special input to the file. The input should describe each region in each line in the below form: <pid> <start address> <end address> Note that the regions will be updated to cover entire memory mapped regions after a 'regions update interval' is passed. If you want the regions to not be updated after the initial setting, you could set the interval as a very long time, say, a few decades. Link: https://lkml.kernel.org/r/20211012205711.29216-1-sj@kernel.org Link: https://lkml.kernel.org/r/20211012205711.29216-2-sj@kernel.org Signed-off-by: SeongJae Park <sj@kernel.org> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Amit Shah <amit@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Jonathan Corbet <corbet@lwn.net> Cc: David Hildenbrand <david@redhat.com> Cc: David Woodhouse <dwmw@amazon.com> Cc: Marco Elver <elver@google.com> Cc: Leonard Foerster <foersleo@amazon.de> Cc: Greg Thelen <gthelen@google.com> Cc: Markus Boehme <markubo@amazon.de> Cc: David Rienjes <rientjes@google.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Brendan Higgins <brendanhiggins@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-11-05 20:46:42 +00:00
if (!kbuf)
return -ENOMEM;
mutex_lock(&ctx->kdamond_lock);
if (ctx->kdamond) {
mutex_unlock(&ctx->kdamond_lock);
len = -EBUSY;
goto out;
}
len = sprint_init_regions(ctx, kbuf, count);
mutex_unlock(&ctx->kdamond_lock);
if (len < 0)
goto out;
len = simple_read_from_buffer(buf, count, ppos, kbuf, len);
out:
kfree(kbuf);
return len;
}
mm/damon/dbgfs/init_regions: use target index instead of target id Patch series "Remove the type-unclear target id concept". DAMON asks each monitoring target ('struct damon_target') to have one 'unsigned long' integer called 'id', which should be unique among the targets of same monitoring context. Meaning of it is, however, totally up to the monitoring primitives that registered to the monitoring context. For example, the virtual address spaces monitoring primitives treats the id as a 'struct pid' pointer. This makes the code flexible but ugly, not well-documented, and type-unsafe[1]. Also, identification of each target can be done via its index. For the reason, this patchset removes the concept and uses clear type definition. [1] https://lore.kernel.org/linux-mm/20211013154535.4aaeaaf9d0182922e405dd1e@linux-foundation.org/ This patch (of 4): Target id is a 'unsigned long' data, which can be interpreted differently by each monitoring primitives. For example, it means 'struct pid *' for the virtual address spaces monitoring, while it means nothing but an integer to be displayed to debugfs interface users for the physical address space monitoring. It's flexible but makes code ugly and type-unsafe[1]. To be prepared for eventual removal of the concept, this commit removes a use case of the concept in 'init_regions' debugfs file handling. In detail, this commit replaces use of the id with the index of each target in the context's targets list. [1] https://lore.kernel.org/linux-mm/20211013154535.4aaeaaf9d0182922e405dd1e@linux-foundation.org/ Link: https://lkml.kernel.org/r/20211230100723.2238-1-sj@kernel.org Link: https://lkml.kernel.org/r/20211230100723.2238-2-sj@kernel.org Signed-off-by: SeongJae Park <sj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-03-22 21:48:31 +00:00
static int add_init_region(struct damon_ctx *c, int target_idx,
struct damon_addr_range *ar)
mm/damon/dbgfs: allow users to set initial monitoring target regions Patch series "DAMON: Support Physical Memory Address Space Monitoring:. DAMON currently supports only virtual address spaces monitoring. It can be easily extended for various use cases and address spaces by configuring its monitoring primitives layer to use appropriate primitives implementations, though. This patchset implements monitoring primitives for the physical address space monitoring using the structure. The first 3 patches allow the user space users manually set the monitoring regions. The 1st patch implements the feature in the 'damon-dbgfs'. Then, patches for adding a unit tests (the 2nd patch) and updating the documentation (the 3rd patch) follow. Following 4 patches implement the physical address space monitoring primitives. The 4th patch makes some primitive functions for the virtual address spaces primitives reusable. The 5th patch implements the physical address space monitoring primitives. The 6th patch links the primitives to the 'damon-dbgfs'. Finally, 7th patch documents this new features. This patch (of 7): Some 'damon-dbgfs' users would want to monitor only a part of the entire virtual memory address space. The program interface users in the kernel space could use '->before_start()' callback or set the regions inside the context struct as they want, but 'damon-dbgfs' users cannot. For that reason, this introduces a new debugfs file called 'init_region'. 'damon-dbgfs' users can specify which initial monitoring target address regions they want by writing special input to the file. The input should describe each region in each line in the below form: <pid> <start address> <end address> Note that the regions will be updated to cover entire memory mapped regions after a 'regions update interval' is passed. If you want the regions to not be updated after the initial setting, you could set the interval as a very long time, say, a few decades. Link: https://lkml.kernel.org/r/20211012205711.29216-1-sj@kernel.org Link: https://lkml.kernel.org/r/20211012205711.29216-2-sj@kernel.org Signed-off-by: SeongJae Park <sj@kernel.org> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Amit Shah <amit@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Jonathan Corbet <corbet@lwn.net> Cc: David Hildenbrand <david@redhat.com> Cc: David Woodhouse <dwmw@amazon.com> Cc: Marco Elver <elver@google.com> Cc: Leonard Foerster <foersleo@amazon.de> Cc: Greg Thelen <gthelen@google.com> Cc: Markus Boehme <markubo@amazon.de> Cc: David Rienjes <rientjes@google.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Brendan Higgins <brendanhiggins@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-11-05 20:46:42 +00:00
{
struct damon_target *t;
struct damon_region *r, *prev;
mm/damon/dbgfs/init_regions: use target index instead of target id Patch series "Remove the type-unclear target id concept". DAMON asks each monitoring target ('struct damon_target') to have one 'unsigned long' integer called 'id', which should be unique among the targets of same monitoring context. Meaning of it is, however, totally up to the monitoring primitives that registered to the monitoring context. For example, the virtual address spaces monitoring primitives treats the id as a 'struct pid' pointer. This makes the code flexible but ugly, not well-documented, and type-unsafe[1]. Also, identification of each target can be done via its index. For the reason, this patchset removes the concept and uses clear type definition. [1] https://lore.kernel.org/linux-mm/20211013154535.4aaeaaf9d0182922e405dd1e@linux-foundation.org/ This patch (of 4): Target id is a 'unsigned long' data, which can be interpreted differently by each monitoring primitives. For example, it means 'struct pid *' for the virtual address spaces monitoring, while it means nothing but an integer to be displayed to debugfs interface users for the physical address space monitoring. It's flexible but makes code ugly and type-unsafe[1]. To be prepared for eventual removal of the concept, this commit removes a use case of the concept in 'init_regions' debugfs file handling. In detail, this commit replaces use of the id with the index of each target in the context's targets list. [1] https://lore.kernel.org/linux-mm/20211013154535.4aaeaaf9d0182922e405dd1e@linux-foundation.org/ Link: https://lkml.kernel.org/r/20211230100723.2238-1-sj@kernel.org Link: https://lkml.kernel.org/r/20211230100723.2238-2-sj@kernel.org Signed-off-by: SeongJae Park <sj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-03-22 21:48:31 +00:00
unsigned long idx = 0;
mm/damon/dbgfs: allow users to set initial monitoring target regions Patch series "DAMON: Support Physical Memory Address Space Monitoring:. DAMON currently supports only virtual address spaces monitoring. It can be easily extended for various use cases and address spaces by configuring its monitoring primitives layer to use appropriate primitives implementations, though. This patchset implements monitoring primitives for the physical address space monitoring using the structure. The first 3 patches allow the user space users manually set the monitoring regions. The 1st patch implements the feature in the 'damon-dbgfs'. Then, patches for adding a unit tests (the 2nd patch) and updating the documentation (the 3rd patch) follow. Following 4 patches implement the physical address space monitoring primitives. The 4th patch makes some primitive functions for the virtual address spaces primitives reusable. The 5th patch implements the physical address space monitoring primitives. The 6th patch links the primitives to the 'damon-dbgfs'. Finally, 7th patch documents this new features. This patch (of 7): Some 'damon-dbgfs' users would want to monitor only a part of the entire virtual memory address space. The program interface users in the kernel space could use '->before_start()' callback or set the regions inside the context struct as they want, but 'damon-dbgfs' users cannot. For that reason, this introduces a new debugfs file called 'init_region'. 'damon-dbgfs' users can specify which initial monitoring target address regions they want by writing special input to the file. The input should describe each region in each line in the below form: <pid> <start address> <end address> Note that the regions will be updated to cover entire memory mapped regions after a 'regions update interval' is passed. If you want the regions to not be updated after the initial setting, you could set the interval as a very long time, say, a few decades. Link: https://lkml.kernel.org/r/20211012205711.29216-1-sj@kernel.org Link: https://lkml.kernel.org/r/20211012205711.29216-2-sj@kernel.org Signed-off-by: SeongJae Park <sj@kernel.org> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Amit Shah <amit@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Jonathan Corbet <corbet@lwn.net> Cc: David Hildenbrand <david@redhat.com> Cc: David Woodhouse <dwmw@amazon.com> Cc: Marco Elver <elver@google.com> Cc: Leonard Foerster <foersleo@amazon.de> Cc: Greg Thelen <gthelen@google.com> Cc: Markus Boehme <markubo@amazon.de> Cc: David Rienjes <rientjes@google.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Brendan Higgins <brendanhiggins@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-11-05 20:46:42 +00:00
int rc = -EINVAL;
if (ar->start >= ar->end)
return -EINVAL;
damon_for_each_target(t, c) {
mm/damon/dbgfs/init_regions: use target index instead of target id Patch series "Remove the type-unclear target id concept". DAMON asks each monitoring target ('struct damon_target') to have one 'unsigned long' integer called 'id', which should be unique among the targets of same monitoring context. Meaning of it is, however, totally up to the monitoring primitives that registered to the monitoring context. For example, the virtual address spaces monitoring primitives treats the id as a 'struct pid' pointer. This makes the code flexible but ugly, not well-documented, and type-unsafe[1]. Also, identification of each target can be done via its index. For the reason, this patchset removes the concept and uses clear type definition. [1] https://lore.kernel.org/linux-mm/20211013154535.4aaeaaf9d0182922e405dd1e@linux-foundation.org/ This patch (of 4): Target id is a 'unsigned long' data, which can be interpreted differently by each monitoring primitives. For example, it means 'struct pid *' for the virtual address spaces monitoring, while it means nothing but an integer to be displayed to debugfs interface users for the physical address space monitoring. It's flexible but makes code ugly and type-unsafe[1]. To be prepared for eventual removal of the concept, this commit removes a use case of the concept in 'init_regions' debugfs file handling. In detail, this commit replaces use of the id with the index of each target in the context's targets list. [1] https://lore.kernel.org/linux-mm/20211013154535.4aaeaaf9d0182922e405dd1e@linux-foundation.org/ Link: https://lkml.kernel.org/r/20211230100723.2238-1-sj@kernel.org Link: https://lkml.kernel.org/r/20211230100723.2238-2-sj@kernel.org Signed-off-by: SeongJae Park <sj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-03-22 21:48:31 +00:00
if (idx++ == target_idx) {
mm/damon/dbgfs: allow users to set initial monitoring target regions Patch series "DAMON: Support Physical Memory Address Space Monitoring:. DAMON currently supports only virtual address spaces monitoring. It can be easily extended for various use cases and address spaces by configuring its monitoring primitives layer to use appropriate primitives implementations, though. This patchset implements monitoring primitives for the physical address space monitoring using the structure. The first 3 patches allow the user space users manually set the monitoring regions. The 1st patch implements the feature in the 'damon-dbgfs'. Then, patches for adding a unit tests (the 2nd patch) and updating the documentation (the 3rd patch) follow. Following 4 patches implement the physical address space monitoring primitives. The 4th patch makes some primitive functions for the virtual address spaces primitives reusable. The 5th patch implements the physical address space monitoring primitives. The 6th patch links the primitives to the 'damon-dbgfs'. Finally, 7th patch documents this new features. This patch (of 7): Some 'damon-dbgfs' users would want to monitor only a part of the entire virtual memory address space. The program interface users in the kernel space could use '->before_start()' callback or set the regions inside the context struct as they want, but 'damon-dbgfs' users cannot. For that reason, this introduces a new debugfs file called 'init_region'. 'damon-dbgfs' users can specify which initial monitoring target address regions they want by writing special input to the file. The input should describe each region in each line in the below form: <pid> <start address> <end address> Note that the regions will be updated to cover entire memory mapped regions after a 'regions update interval' is passed. If you want the regions to not be updated after the initial setting, you could set the interval as a very long time, say, a few decades. Link: https://lkml.kernel.org/r/20211012205711.29216-1-sj@kernel.org Link: https://lkml.kernel.org/r/20211012205711.29216-2-sj@kernel.org Signed-off-by: SeongJae Park <sj@kernel.org> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Amit Shah <amit@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Jonathan Corbet <corbet@lwn.net> Cc: David Hildenbrand <david@redhat.com> Cc: David Woodhouse <dwmw@amazon.com> Cc: Marco Elver <elver@google.com> Cc: Leonard Foerster <foersleo@amazon.de> Cc: Greg Thelen <gthelen@google.com> Cc: Markus Boehme <markubo@amazon.de> Cc: David Rienjes <rientjes@google.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Brendan Higgins <brendanhiggins@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-11-05 20:46:42 +00:00
r = damon_new_region(ar->start, ar->end);
if (!r)
return -ENOMEM;
damon_add_region(r, t);
if (damon_nr_regions(t) > 1) {
prev = damon_prev_region(r);
if (prev->ar.end > r->ar.start) {
damon_destroy_region(r, t);
return -EINVAL;
}
}
rc = 0;
}
}
return rc;
}
static int set_init_regions(struct damon_ctx *c, const char *str, ssize_t len)
{
struct damon_target *t;
struct damon_region *r, *next;
int pos = 0, parsed, ret;
mm/damon/dbgfs/init_regions: use target index instead of target id Patch series "Remove the type-unclear target id concept". DAMON asks each monitoring target ('struct damon_target') to have one 'unsigned long' integer called 'id', which should be unique among the targets of same monitoring context. Meaning of it is, however, totally up to the monitoring primitives that registered to the monitoring context. For example, the virtual address spaces monitoring primitives treats the id as a 'struct pid' pointer. This makes the code flexible but ugly, not well-documented, and type-unsafe[1]. Also, identification of each target can be done via its index. For the reason, this patchset removes the concept and uses clear type definition. [1] https://lore.kernel.org/linux-mm/20211013154535.4aaeaaf9d0182922e405dd1e@linux-foundation.org/ This patch (of 4): Target id is a 'unsigned long' data, which can be interpreted differently by each monitoring primitives. For example, it means 'struct pid *' for the virtual address spaces monitoring, while it means nothing but an integer to be displayed to debugfs interface users for the physical address space monitoring. It's flexible but makes code ugly and type-unsafe[1]. To be prepared for eventual removal of the concept, this commit removes a use case of the concept in 'init_regions' debugfs file handling. In detail, this commit replaces use of the id with the index of each target in the context's targets list. [1] https://lore.kernel.org/linux-mm/20211013154535.4aaeaaf9d0182922e405dd1e@linux-foundation.org/ Link: https://lkml.kernel.org/r/20211230100723.2238-1-sj@kernel.org Link: https://lkml.kernel.org/r/20211230100723.2238-2-sj@kernel.org Signed-off-by: SeongJae Park <sj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-03-22 21:48:31 +00:00
int target_idx;
mm/damon/dbgfs: allow users to set initial monitoring target regions Patch series "DAMON: Support Physical Memory Address Space Monitoring:. DAMON currently supports only virtual address spaces monitoring. It can be easily extended for various use cases and address spaces by configuring its monitoring primitives layer to use appropriate primitives implementations, though. This patchset implements monitoring primitives for the physical address space monitoring using the structure. The first 3 patches allow the user space users manually set the monitoring regions. The 1st patch implements the feature in the 'damon-dbgfs'. Then, patches for adding a unit tests (the 2nd patch) and updating the documentation (the 3rd patch) follow. Following 4 patches implement the physical address space monitoring primitives. The 4th patch makes some primitive functions for the virtual address spaces primitives reusable. The 5th patch implements the physical address space monitoring primitives. The 6th patch links the primitives to the 'damon-dbgfs'. Finally, 7th patch documents this new features. This patch (of 7): Some 'damon-dbgfs' users would want to monitor only a part of the entire virtual memory address space. The program interface users in the kernel space could use '->before_start()' callback or set the regions inside the context struct as they want, but 'damon-dbgfs' users cannot. For that reason, this introduces a new debugfs file called 'init_region'. 'damon-dbgfs' users can specify which initial monitoring target address regions they want by writing special input to the file. The input should describe each region in each line in the below form: <pid> <start address> <end address> Note that the regions will be updated to cover entire memory mapped regions after a 'regions update interval' is passed. If you want the regions to not be updated after the initial setting, you could set the interval as a very long time, say, a few decades. Link: https://lkml.kernel.org/r/20211012205711.29216-1-sj@kernel.org Link: https://lkml.kernel.org/r/20211012205711.29216-2-sj@kernel.org Signed-off-by: SeongJae Park <sj@kernel.org> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Amit Shah <amit@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Jonathan Corbet <corbet@lwn.net> Cc: David Hildenbrand <david@redhat.com> Cc: David Woodhouse <dwmw@amazon.com> Cc: Marco Elver <elver@google.com> Cc: Leonard Foerster <foersleo@amazon.de> Cc: Greg Thelen <gthelen@google.com> Cc: Markus Boehme <markubo@amazon.de> Cc: David Rienjes <rientjes@google.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Brendan Higgins <brendanhiggins@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-11-05 20:46:42 +00:00
struct damon_addr_range ar;
int err;
damon_for_each_target(t, c) {
damon_for_each_region_safe(r, next, t)
damon_destroy_region(r, t);
}
while (pos < len) {
mm/damon/dbgfs/init_regions: use target index instead of target id Patch series "Remove the type-unclear target id concept". DAMON asks each monitoring target ('struct damon_target') to have one 'unsigned long' integer called 'id', which should be unique among the targets of same monitoring context. Meaning of it is, however, totally up to the monitoring primitives that registered to the monitoring context. For example, the virtual address spaces monitoring primitives treats the id as a 'struct pid' pointer. This makes the code flexible but ugly, not well-documented, and type-unsafe[1]. Also, identification of each target can be done via its index. For the reason, this patchset removes the concept and uses clear type definition. [1] https://lore.kernel.org/linux-mm/20211013154535.4aaeaaf9d0182922e405dd1e@linux-foundation.org/ This patch (of 4): Target id is a 'unsigned long' data, which can be interpreted differently by each monitoring primitives. For example, it means 'struct pid *' for the virtual address spaces monitoring, while it means nothing but an integer to be displayed to debugfs interface users for the physical address space monitoring. It's flexible but makes code ugly and type-unsafe[1]. To be prepared for eventual removal of the concept, this commit removes a use case of the concept in 'init_regions' debugfs file handling. In detail, this commit replaces use of the id with the index of each target in the context's targets list. [1] https://lore.kernel.org/linux-mm/20211013154535.4aaeaaf9d0182922e405dd1e@linux-foundation.org/ Link: https://lkml.kernel.org/r/20211230100723.2238-1-sj@kernel.org Link: https://lkml.kernel.org/r/20211230100723.2238-2-sj@kernel.org Signed-off-by: SeongJae Park <sj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-03-22 21:48:31 +00:00
ret = sscanf(&str[pos], "%d %lu %lu%n",
&target_idx, &ar.start, &ar.end, &parsed);
mm/damon/dbgfs: allow users to set initial monitoring target regions Patch series "DAMON: Support Physical Memory Address Space Monitoring:. DAMON currently supports only virtual address spaces monitoring. It can be easily extended for various use cases and address spaces by configuring its monitoring primitives layer to use appropriate primitives implementations, though. This patchset implements monitoring primitives for the physical address space monitoring using the structure. The first 3 patches allow the user space users manually set the monitoring regions. The 1st patch implements the feature in the 'damon-dbgfs'. Then, patches for adding a unit tests (the 2nd patch) and updating the documentation (the 3rd patch) follow. Following 4 patches implement the physical address space monitoring primitives. The 4th patch makes some primitive functions for the virtual address spaces primitives reusable. The 5th patch implements the physical address space monitoring primitives. The 6th patch links the primitives to the 'damon-dbgfs'. Finally, 7th patch documents this new features. This patch (of 7): Some 'damon-dbgfs' users would want to monitor only a part of the entire virtual memory address space. The program interface users in the kernel space could use '->before_start()' callback or set the regions inside the context struct as they want, but 'damon-dbgfs' users cannot. For that reason, this introduces a new debugfs file called 'init_region'. 'damon-dbgfs' users can specify which initial monitoring target address regions they want by writing special input to the file. The input should describe each region in each line in the below form: <pid> <start address> <end address> Note that the regions will be updated to cover entire memory mapped regions after a 'regions update interval' is passed. If you want the regions to not be updated after the initial setting, you could set the interval as a very long time, say, a few decades. Link: https://lkml.kernel.org/r/20211012205711.29216-1-sj@kernel.org Link: https://lkml.kernel.org/r/20211012205711.29216-2-sj@kernel.org Signed-off-by: SeongJae Park <sj@kernel.org> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Amit Shah <amit@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Jonathan Corbet <corbet@lwn.net> Cc: David Hildenbrand <david@redhat.com> Cc: David Woodhouse <dwmw@amazon.com> Cc: Marco Elver <elver@google.com> Cc: Leonard Foerster <foersleo@amazon.de> Cc: Greg Thelen <gthelen@google.com> Cc: Markus Boehme <markubo@amazon.de> Cc: David Rienjes <rientjes@google.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Brendan Higgins <brendanhiggins@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-11-05 20:46:42 +00:00
if (ret != 3)
break;
mm/damon/dbgfs/init_regions: use target index instead of target id Patch series "Remove the type-unclear target id concept". DAMON asks each monitoring target ('struct damon_target') to have one 'unsigned long' integer called 'id', which should be unique among the targets of same monitoring context. Meaning of it is, however, totally up to the monitoring primitives that registered to the monitoring context. For example, the virtual address spaces monitoring primitives treats the id as a 'struct pid' pointer. This makes the code flexible but ugly, not well-documented, and type-unsafe[1]. Also, identification of each target can be done via its index. For the reason, this patchset removes the concept and uses clear type definition. [1] https://lore.kernel.org/linux-mm/20211013154535.4aaeaaf9d0182922e405dd1e@linux-foundation.org/ This patch (of 4): Target id is a 'unsigned long' data, which can be interpreted differently by each monitoring primitives. For example, it means 'struct pid *' for the virtual address spaces monitoring, while it means nothing but an integer to be displayed to debugfs interface users for the physical address space monitoring. It's flexible but makes code ugly and type-unsafe[1]. To be prepared for eventual removal of the concept, this commit removes a use case of the concept in 'init_regions' debugfs file handling. In detail, this commit replaces use of the id with the index of each target in the context's targets list. [1] https://lore.kernel.org/linux-mm/20211013154535.4aaeaaf9d0182922e405dd1e@linux-foundation.org/ Link: https://lkml.kernel.org/r/20211230100723.2238-1-sj@kernel.org Link: https://lkml.kernel.org/r/20211230100723.2238-2-sj@kernel.org Signed-off-by: SeongJae Park <sj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-03-22 21:48:31 +00:00
err = add_init_region(c, target_idx, &ar);
mm/damon/dbgfs: allow users to set initial monitoring target regions Patch series "DAMON: Support Physical Memory Address Space Monitoring:. DAMON currently supports only virtual address spaces monitoring. It can be easily extended for various use cases and address spaces by configuring its monitoring primitives layer to use appropriate primitives implementations, though. This patchset implements monitoring primitives for the physical address space monitoring using the structure. The first 3 patches allow the user space users manually set the monitoring regions. The 1st patch implements the feature in the 'damon-dbgfs'. Then, patches for adding a unit tests (the 2nd patch) and updating the documentation (the 3rd patch) follow. Following 4 patches implement the physical address space monitoring primitives. The 4th patch makes some primitive functions for the virtual address spaces primitives reusable. The 5th patch implements the physical address space monitoring primitives. The 6th patch links the primitives to the 'damon-dbgfs'. Finally, 7th patch documents this new features. This patch (of 7): Some 'damon-dbgfs' users would want to monitor only a part of the entire virtual memory address space. The program interface users in the kernel space could use '->before_start()' callback or set the regions inside the context struct as they want, but 'damon-dbgfs' users cannot. For that reason, this introduces a new debugfs file called 'init_region'. 'damon-dbgfs' users can specify which initial monitoring target address regions they want by writing special input to the file. The input should describe each region in each line in the below form: <pid> <start address> <end address> Note that the regions will be updated to cover entire memory mapped regions after a 'regions update interval' is passed. If you want the regions to not be updated after the initial setting, you could set the interval as a very long time, say, a few decades. Link: https://lkml.kernel.org/r/20211012205711.29216-1-sj@kernel.org Link: https://lkml.kernel.org/r/20211012205711.29216-2-sj@kernel.org Signed-off-by: SeongJae Park <sj@kernel.org> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Amit Shah <amit@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Jonathan Corbet <corbet@lwn.net> Cc: David Hildenbrand <david@redhat.com> Cc: David Woodhouse <dwmw@amazon.com> Cc: Marco Elver <elver@google.com> Cc: Leonard Foerster <foersleo@amazon.de> Cc: Greg Thelen <gthelen@google.com> Cc: Markus Boehme <markubo@amazon.de> Cc: David Rienjes <rientjes@google.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Brendan Higgins <brendanhiggins@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-11-05 20:46:42 +00:00
if (err)
goto fail;
pos += parsed;
}
return 0;
fail:
damon_for_each_target(t, c) {
damon_for_each_region_safe(r, next, t)
damon_destroy_region(r, t);
}
return err;
}
static ssize_t dbgfs_init_regions_write(struct file *file,
const char __user *buf, size_t count,
loff_t *ppos)
{
struct damon_ctx *ctx = file->private_data;
char *kbuf;
ssize_t ret = count;
int err;
kbuf = user_input_str(buf, count, ppos);
if (IS_ERR(kbuf))
return PTR_ERR(kbuf);
mutex_lock(&ctx->kdamond_lock);
if (ctx->kdamond) {
ret = -EBUSY;
goto unlock_out;
}
err = set_init_regions(ctx, kbuf, ret);
if (err)
ret = err;
unlock_out:
mutex_unlock(&ctx->kdamond_lock);
kfree(kbuf);
return ret;
}
mm/damon/dbgfs: export kdamond pid to the user space For CPU usage accounting, knowing pid of the monitoring thread could be helpful. For example, users could use cpuaccount cgroups with the pid. This commit therefore exports the pid of currently running monitoring thread to the user space via 'kdamond_pid' file in the debugfs directory. Link: https://lkml.kernel.org/r/20210716081449.22187-9-sj38.park@gmail.com Signed-off-by: SeongJae Park <sjpark@amazon.de> Reviewed-by: Fernand Sieber <sieberf@amazon.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Amit Shah <amit@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Brendan Higgins <brendanhiggins@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: David Woodhouse <dwmw@amazon.com> Cc: Fan Du <fan.du@intel.com> Cc: Greg Kroah-Hartman <greg@kroah.com> Cc: Greg Thelen <gthelen@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joe Perches <joe@perches.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Leonard Foerster <foersleo@amazon.de> Cc: Marco Elver <elver@google.com> Cc: Markus Boehme <markubo@amazon.de> Cc: Maximilian Heyne <mheyne@amazon.de> Cc: Mel Gorman <mgorman@suse.de> Cc: Minchan Kim <minchan@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@surriel.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-08 02:56:57 +00:00
static ssize_t dbgfs_kdamond_pid_read(struct file *file,
char __user *buf, size_t count, loff_t *ppos)
{
struct damon_ctx *ctx = file->private_data;
char *kbuf;
ssize_t len;
kbuf = kmalloc(count, GFP_KERNEL | __GFP_NOWARN);
mm/damon/dbgfs: export kdamond pid to the user space For CPU usage accounting, knowing pid of the monitoring thread could be helpful. For example, users could use cpuaccount cgroups with the pid. This commit therefore exports the pid of currently running monitoring thread to the user space via 'kdamond_pid' file in the debugfs directory. Link: https://lkml.kernel.org/r/20210716081449.22187-9-sj38.park@gmail.com Signed-off-by: SeongJae Park <sjpark@amazon.de> Reviewed-by: Fernand Sieber <sieberf@amazon.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Amit Shah <amit@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Brendan Higgins <brendanhiggins@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: David Woodhouse <dwmw@amazon.com> Cc: Fan Du <fan.du@intel.com> Cc: Greg Kroah-Hartman <greg@kroah.com> Cc: Greg Thelen <gthelen@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joe Perches <joe@perches.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Leonard Foerster <foersleo@amazon.de> Cc: Marco Elver <elver@google.com> Cc: Markus Boehme <markubo@amazon.de> Cc: Maximilian Heyne <mheyne@amazon.de> Cc: Mel Gorman <mgorman@suse.de> Cc: Minchan Kim <minchan@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@surriel.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-08 02:56:57 +00:00
if (!kbuf)
return -ENOMEM;
mutex_lock(&ctx->kdamond_lock);
if (ctx->kdamond)
len = scnprintf(kbuf, count, "%d\n", ctx->kdamond->pid);
else
len = scnprintf(kbuf, count, "none\n");
mutex_unlock(&ctx->kdamond_lock);
if (!len)
goto out;
len = simple_read_from_buffer(buf, count, ppos, kbuf, len);
out:
kfree(kbuf);
return len;
}
mm/damon: implement a debugfs-based user space interface DAMON is designed to be used by kernel space code such as the memory management subsystems, and therefore it provides only kernel space API. That said, letting the user space control DAMON could provide some benefits to them. For example, it will allow user space to analyze their specific workloads and make their own special optimizations. For such cases, this commit implements a simple DAMON application kernel module, namely 'damon-dbgfs', which merely wraps the DAMON api and exports those to the user space via the debugfs. 'damon-dbgfs' exports three files, ``attrs``, ``target_ids``, and ``monitor_on`` under its debugfs directory, ``<debugfs>/damon/``. Attributes ---------- Users can read and write the ``sampling interval``, ``aggregation interval``, ``regions update interval``, and min/max number of monitoring target regions by reading from and writing to the ``attrs`` file. For example, below commands set those values to 5 ms, 100 ms, 1,000 ms, 10, 1000 and check it again:: # cd <debugfs>/damon # echo 5000 100000 1000000 10 1000 > attrs # cat attrs 5000 100000 1000000 10 1000 Target IDs ---------- Some types of address spaces supports multiple monitoring target. For example, the virtual memory address spaces monitoring can have multiple processes as the monitoring targets. Users can set the targets by writing relevant id values of the targets to, and get the ids of the current targets by reading from the ``target_ids`` file. In case of the virtual address spaces monitoring, the values should be pids of the monitoring target processes. For example, below commands set processes having pids 42 and 4242 as the monitoring targets and check it again:: # cd <debugfs>/damon # echo 42 4242 > target_ids # cat target_ids 42 4242 Note that setting the target ids doesn't start the monitoring. Turning On/Off -------------- Setting the files as described above doesn't incur effect unless you explicitly start the monitoring. You can start, stop, and check the current status of the monitoring by writing to and reading from the ``monitor_on`` file. Writing ``on`` to the file starts the monitoring of the targets with the attributes. Writing ``off`` to the file stops those. DAMON also stops if every targets are invalidated (in case of the virtual memory monitoring, target processes are invalidated when terminated). Below example commands turn on, off, and check the status of DAMON:: # cd <debugfs>/damon # echo on > monitor_on # echo off > monitor_on # cat monitor_on off Please note that you cannot write to the above-mentioned debugfs files while the monitoring is turned on. If you write to the files while DAMON is running, an error code such as ``-EBUSY`` will be returned. [akpm@linux-foundation.org: remove unneeded "alloc failed" printks] [akpm@linux-foundation.org: replace macro with static inline] Link: https://lkml.kernel.org/r/20210716081449.22187-8-sj38.park@gmail.com Signed-off-by: SeongJae Park <sjpark@amazon.de> Reviewed-by: Leonard Foerster <foersleo@amazon.de> Reviewed-by: Fernand Sieber <sieberf@amazon.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Amit Shah <amit@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Brendan Higgins <brendanhiggins@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: David Woodhouse <dwmw@amazon.com> Cc: Fan Du <fan.du@intel.com> Cc: Greg Kroah-Hartman <greg@kroah.com> Cc: Greg Thelen <gthelen@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joe Perches <joe@perches.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Marco Elver <elver@google.com> Cc: Markus Boehme <markubo@amazon.de> Cc: Maximilian Heyne <mheyne@amazon.de> Cc: Mel Gorman <mgorman@suse.de> Cc: Minchan Kim <minchan@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@surriel.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-08 02:56:53 +00:00
static int damon_dbgfs_open(struct inode *inode, struct file *file)
{
damon_dbgfs_warn_deprecation();
mm/damon: implement a debugfs-based user space interface DAMON is designed to be used by kernel space code such as the memory management subsystems, and therefore it provides only kernel space API. That said, letting the user space control DAMON could provide some benefits to them. For example, it will allow user space to analyze their specific workloads and make their own special optimizations. For such cases, this commit implements a simple DAMON application kernel module, namely 'damon-dbgfs', which merely wraps the DAMON api and exports those to the user space via the debugfs. 'damon-dbgfs' exports three files, ``attrs``, ``target_ids``, and ``monitor_on`` under its debugfs directory, ``<debugfs>/damon/``. Attributes ---------- Users can read and write the ``sampling interval``, ``aggregation interval``, ``regions update interval``, and min/max number of monitoring target regions by reading from and writing to the ``attrs`` file. For example, below commands set those values to 5 ms, 100 ms, 1,000 ms, 10, 1000 and check it again:: # cd <debugfs>/damon # echo 5000 100000 1000000 10 1000 > attrs # cat attrs 5000 100000 1000000 10 1000 Target IDs ---------- Some types of address spaces supports multiple monitoring target. For example, the virtual memory address spaces monitoring can have multiple processes as the monitoring targets. Users can set the targets by writing relevant id values of the targets to, and get the ids of the current targets by reading from the ``target_ids`` file. In case of the virtual address spaces monitoring, the values should be pids of the monitoring target processes. For example, below commands set processes having pids 42 and 4242 as the monitoring targets and check it again:: # cd <debugfs>/damon # echo 42 4242 > target_ids # cat target_ids 42 4242 Note that setting the target ids doesn't start the monitoring. Turning On/Off -------------- Setting the files as described above doesn't incur effect unless you explicitly start the monitoring. You can start, stop, and check the current status of the monitoring by writing to and reading from the ``monitor_on`` file. Writing ``on`` to the file starts the monitoring of the targets with the attributes. Writing ``off`` to the file stops those. DAMON also stops if every targets are invalidated (in case of the virtual memory monitoring, target processes are invalidated when terminated). Below example commands turn on, off, and check the status of DAMON:: # cd <debugfs>/damon # echo on > monitor_on # echo off > monitor_on # cat monitor_on off Please note that you cannot write to the above-mentioned debugfs files while the monitoring is turned on. If you write to the files while DAMON is running, an error code such as ``-EBUSY`` will be returned. [akpm@linux-foundation.org: remove unneeded "alloc failed" printks] [akpm@linux-foundation.org: replace macro with static inline] Link: https://lkml.kernel.org/r/20210716081449.22187-8-sj38.park@gmail.com Signed-off-by: SeongJae Park <sjpark@amazon.de> Reviewed-by: Leonard Foerster <foersleo@amazon.de> Reviewed-by: Fernand Sieber <sieberf@amazon.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Amit Shah <amit@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Brendan Higgins <brendanhiggins@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: David Woodhouse <dwmw@amazon.com> Cc: Fan Du <fan.du@intel.com> Cc: Greg Kroah-Hartman <greg@kroah.com> Cc: Greg Thelen <gthelen@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joe Perches <joe@perches.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Marco Elver <elver@google.com> Cc: Markus Boehme <markubo@amazon.de> Cc: Maximilian Heyne <mheyne@amazon.de> Cc: Mel Gorman <mgorman@suse.de> Cc: Minchan Kim <minchan@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@surriel.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-08 02:56:53 +00:00
file->private_data = inode->i_private;
return nonseekable_open(inode, file);
}
static const struct file_operations attrs_fops = {
.open = damon_dbgfs_open,
.read = dbgfs_attrs_read,
.write = dbgfs_attrs_write,
};
static const struct file_operations schemes_fops = {
.open = damon_dbgfs_open,
.read = dbgfs_schemes_read,
.write = dbgfs_schemes_write,
};
mm/damon: implement a debugfs-based user space interface DAMON is designed to be used by kernel space code such as the memory management subsystems, and therefore it provides only kernel space API. That said, letting the user space control DAMON could provide some benefits to them. For example, it will allow user space to analyze their specific workloads and make their own special optimizations. For such cases, this commit implements a simple DAMON application kernel module, namely 'damon-dbgfs', which merely wraps the DAMON api and exports those to the user space via the debugfs. 'damon-dbgfs' exports three files, ``attrs``, ``target_ids``, and ``monitor_on`` under its debugfs directory, ``<debugfs>/damon/``. Attributes ---------- Users can read and write the ``sampling interval``, ``aggregation interval``, ``regions update interval``, and min/max number of monitoring target regions by reading from and writing to the ``attrs`` file. For example, below commands set those values to 5 ms, 100 ms, 1,000 ms, 10, 1000 and check it again:: # cd <debugfs>/damon # echo 5000 100000 1000000 10 1000 > attrs # cat attrs 5000 100000 1000000 10 1000 Target IDs ---------- Some types of address spaces supports multiple monitoring target. For example, the virtual memory address spaces monitoring can have multiple processes as the monitoring targets. Users can set the targets by writing relevant id values of the targets to, and get the ids of the current targets by reading from the ``target_ids`` file. In case of the virtual address spaces monitoring, the values should be pids of the monitoring target processes. For example, below commands set processes having pids 42 and 4242 as the monitoring targets and check it again:: # cd <debugfs>/damon # echo 42 4242 > target_ids # cat target_ids 42 4242 Note that setting the target ids doesn't start the monitoring. Turning On/Off -------------- Setting the files as described above doesn't incur effect unless you explicitly start the monitoring. You can start, stop, and check the current status of the monitoring by writing to and reading from the ``monitor_on`` file. Writing ``on`` to the file starts the monitoring of the targets with the attributes. Writing ``off`` to the file stops those. DAMON also stops if every targets are invalidated (in case of the virtual memory monitoring, target processes are invalidated when terminated). Below example commands turn on, off, and check the status of DAMON:: # cd <debugfs>/damon # echo on > monitor_on # echo off > monitor_on # cat monitor_on off Please note that you cannot write to the above-mentioned debugfs files while the monitoring is turned on. If you write to the files while DAMON is running, an error code such as ``-EBUSY`` will be returned. [akpm@linux-foundation.org: remove unneeded "alloc failed" printks] [akpm@linux-foundation.org: replace macro with static inline] Link: https://lkml.kernel.org/r/20210716081449.22187-8-sj38.park@gmail.com Signed-off-by: SeongJae Park <sjpark@amazon.de> Reviewed-by: Leonard Foerster <foersleo@amazon.de> Reviewed-by: Fernand Sieber <sieberf@amazon.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Amit Shah <amit@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Brendan Higgins <brendanhiggins@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: David Woodhouse <dwmw@amazon.com> Cc: Fan Du <fan.du@intel.com> Cc: Greg Kroah-Hartman <greg@kroah.com> Cc: Greg Thelen <gthelen@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joe Perches <joe@perches.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Marco Elver <elver@google.com> Cc: Markus Boehme <markubo@amazon.de> Cc: Maximilian Heyne <mheyne@amazon.de> Cc: Mel Gorman <mgorman@suse.de> Cc: Minchan Kim <minchan@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@surriel.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-08 02:56:53 +00:00
static const struct file_operations target_ids_fops = {
.open = damon_dbgfs_open,
.read = dbgfs_target_ids_read,
.write = dbgfs_target_ids_write,
};
mm/damon/dbgfs: allow users to set initial monitoring target regions Patch series "DAMON: Support Physical Memory Address Space Monitoring:. DAMON currently supports only virtual address spaces monitoring. It can be easily extended for various use cases and address spaces by configuring its monitoring primitives layer to use appropriate primitives implementations, though. This patchset implements monitoring primitives for the physical address space monitoring using the structure. The first 3 patches allow the user space users manually set the monitoring regions. The 1st patch implements the feature in the 'damon-dbgfs'. Then, patches for adding a unit tests (the 2nd patch) and updating the documentation (the 3rd patch) follow. Following 4 patches implement the physical address space monitoring primitives. The 4th patch makes some primitive functions for the virtual address spaces primitives reusable. The 5th patch implements the physical address space monitoring primitives. The 6th patch links the primitives to the 'damon-dbgfs'. Finally, 7th patch documents this new features. This patch (of 7): Some 'damon-dbgfs' users would want to monitor only a part of the entire virtual memory address space. The program interface users in the kernel space could use '->before_start()' callback or set the regions inside the context struct as they want, but 'damon-dbgfs' users cannot. For that reason, this introduces a new debugfs file called 'init_region'. 'damon-dbgfs' users can specify which initial monitoring target address regions they want by writing special input to the file. The input should describe each region in each line in the below form: <pid> <start address> <end address> Note that the regions will be updated to cover entire memory mapped regions after a 'regions update interval' is passed. If you want the regions to not be updated after the initial setting, you could set the interval as a very long time, say, a few decades. Link: https://lkml.kernel.org/r/20211012205711.29216-1-sj@kernel.org Link: https://lkml.kernel.org/r/20211012205711.29216-2-sj@kernel.org Signed-off-by: SeongJae Park <sj@kernel.org> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Amit Shah <amit@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Jonathan Corbet <corbet@lwn.net> Cc: David Hildenbrand <david@redhat.com> Cc: David Woodhouse <dwmw@amazon.com> Cc: Marco Elver <elver@google.com> Cc: Leonard Foerster <foersleo@amazon.de> Cc: Greg Thelen <gthelen@google.com> Cc: Markus Boehme <markubo@amazon.de> Cc: David Rienjes <rientjes@google.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Brendan Higgins <brendanhiggins@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-11-05 20:46:42 +00:00
static const struct file_operations init_regions_fops = {
.open = damon_dbgfs_open,
.read = dbgfs_init_regions_read,
.write = dbgfs_init_regions_write,
};
mm/damon/dbgfs: export kdamond pid to the user space For CPU usage accounting, knowing pid of the monitoring thread could be helpful. For example, users could use cpuaccount cgroups with the pid. This commit therefore exports the pid of currently running monitoring thread to the user space via 'kdamond_pid' file in the debugfs directory. Link: https://lkml.kernel.org/r/20210716081449.22187-9-sj38.park@gmail.com Signed-off-by: SeongJae Park <sjpark@amazon.de> Reviewed-by: Fernand Sieber <sieberf@amazon.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Amit Shah <amit@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Brendan Higgins <brendanhiggins@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: David Woodhouse <dwmw@amazon.com> Cc: Fan Du <fan.du@intel.com> Cc: Greg Kroah-Hartman <greg@kroah.com> Cc: Greg Thelen <gthelen@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joe Perches <joe@perches.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Leonard Foerster <foersleo@amazon.de> Cc: Marco Elver <elver@google.com> Cc: Markus Boehme <markubo@amazon.de> Cc: Maximilian Heyne <mheyne@amazon.de> Cc: Mel Gorman <mgorman@suse.de> Cc: Minchan Kim <minchan@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@surriel.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-08 02:56:57 +00:00
static const struct file_operations kdamond_pid_fops = {
.open = damon_dbgfs_open,
.read = dbgfs_kdamond_pid_read,
};
mm/damon: implement a debugfs-based user space interface DAMON is designed to be used by kernel space code such as the memory management subsystems, and therefore it provides only kernel space API. That said, letting the user space control DAMON could provide some benefits to them. For example, it will allow user space to analyze their specific workloads and make their own special optimizations. For such cases, this commit implements a simple DAMON application kernel module, namely 'damon-dbgfs', which merely wraps the DAMON api and exports those to the user space via the debugfs. 'damon-dbgfs' exports three files, ``attrs``, ``target_ids``, and ``monitor_on`` under its debugfs directory, ``<debugfs>/damon/``. Attributes ---------- Users can read and write the ``sampling interval``, ``aggregation interval``, ``regions update interval``, and min/max number of monitoring target regions by reading from and writing to the ``attrs`` file. For example, below commands set those values to 5 ms, 100 ms, 1,000 ms, 10, 1000 and check it again:: # cd <debugfs>/damon # echo 5000 100000 1000000 10 1000 > attrs # cat attrs 5000 100000 1000000 10 1000 Target IDs ---------- Some types of address spaces supports multiple monitoring target. For example, the virtual memory address spaces monitoring can have multiple processes as the monitoring targets. Users can set the targets by writing relevant id values of the targets to, and get the ids of the current targets by reading from the ``target_ids`` file. In case of the virtual address spaces monitoring, the values should be pids of the monitoring target processes. For example, below commands set processes having pids 42 and 4242 as the monitoring targets and check it again:: # cd <debugfs>/damon # echo 42 4242 > target_ids # cat target_ids 42 4242 Note that setting the target ids doesn't start the monitoring. Turning On/Off -------------- Setting the files as described above doesn't incur effect unless you explicitly start the monitoring. You can start, stop, and check the current status of the monitoring by writing to and reading from the ``monitor_on`` file. Writing ``on`` to the file starts the monitoring of the targets with the attributes. Writing ``off`` to the file stops those. DAMON also stops if every targets are invalidated (in case of the virtual memory monitoring, target processes are invalidated when terminated). Below example commands turn on, off, and check the status of DAMON:: # cd <debugfs>/damon # echo on > monitor_on # echo off > monitor_on # cat monitor_on off Please note that you cannot write to the above-mentioned debugfs files while the monitoring is turned on. If you write to the files while DAMON is running, an error code such as ``-EBUSY`` will be returned. [akpm@linux-foundation.org: remove unneeded "alloc failed" printks] [akpm@linux-foundation.org: replace macro with static inline] Link: https://lkml.kernel.org/r/20210716081449.22187-8-sj38.park@gmail.com Signed-off-by: SeongJae Park <sjpark@amazon.de> Reviewed-by: Leonard Foerster <foersleo@amazon.de> Reviewed-by: Fernand Sieber <sieberf@amazon.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Amit Shah <amit@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Brendan Higgins <brendanhiggins@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: David Woodhouse <dwmw@amazon.com> Cc: Fan Du <fan.du@intel.com> Cc: Greg Kroah-Hartman <greg@kroah.com> Cc: Greg Thelen <gthelen@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joe Perches <joe@perches.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Marco Elver <elver@google.com> Cc: Markus Boehme <markubo@amazon.de> Cc: Maximilian Heyne <mheyne@amazon.de> Cc: Mel Gorman <mgorman@suse.de> Cc: Minchan Kim <minchan@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@surriel.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-08 02:56:53 +00:00
static void dbgfs_fill_ctx_dir(struct dentry *dir, struct damon_ctx *ctx)
{
const char * const file_names[] = {"attrs", "schemes", "target_ids",
mm/damon/dbgfs: allow users to set initial monitoring target regions Patch series "DAMON: Support Physical Memory Address Space Monitoring:. DAMON currently supports only virtual address spaces monitoring. It can be easily extended for various use cases and address spaces by configuring its monitoring primitives layer to use appropriate primitives implementations, though. This patchset implements monitoring primitives for the physical address space monitoring using the structure. The first 3 patches allow the user space users manually set the monitoring regions. The 1st patch implements the feature in the 'damon-dbgfs'. Then, patches for adding a unit tests (the 2nd patch) and updating the documentation (the 3rd patch) follow. Following 4 patches implement the physical address space monitoring primitives. The 4th patch makes some primitive functions for the virtual address spaces primitives reusable. The 5th patch implements the physical address space monitoring primitives. The 6th patch links the primitives to the 'damon-dbgfs'. Finally, 7th patch documents this new features. This patch (of 7): Some 'damon-dbgfs' users would want to monitor only a part of the entire virtual memory address space. The program interface users in the kernel space could use '->before_start()' callback or set the regions inside the context struct as they want, but 'damon-dbgfs' users cannot. For that reason, this introduces a new debugfs file called 'init_region'. 'damon-dbgfs' users can specify which initial monitoring target address regions they want by writing special input to the file. The input should describe each region in each line in the below form: <pid> <start address> <end address> Note that the regions will be updated to cover entire memory mapped regions after a 'regions update interval' is passed. If you want the regions to not be updated after the initial setting, you could set the interval as a very long time, say, a few decades. Link: https://lkml.kernel.org/r/20211012205711.29216-1-sj@kernel.org Link: https://lkml.kernel.org/r/20211012205711.29216-2-sj@kernel.org Signed-off-by: SeongJae Park <sj@kernel.org> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Amit Shah <amit@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Jonathan Corbet <corbet@lwn.net> Cc: David Hildenbrand <david@redhat.com> Cc: David Woodhouse <dwmw@amazon.com> Cc: Marco Elver <elver@google.com> Cc: Leonard Foerster <foersleo@amazon.de> Cc: Greg Thelen <gthelen@google.com> Cc: Markus Boehme <markubo@amazon.de> Cc: David Rienjes <rientjes@google.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Brendan Higgins <brendanhiggins@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-11-05 20:46:42 +00:00
"init_regions", "kdamond_pid"};
const struct file_operations *fops[] = {&attrs_fops, &schemes_fops,
mm/damon/dbgfs: allow users to set initial monitoring target regions Patch series "DAMON: Support Physical Memory Address Space Monitoring:. DAMON currently supports only virtual address spaces monitoring. It can be easily extended for various use cases and address spaces by configuring its monitoring primitives layer to use appropriate primitives implementations, though. This patchset implements monitoring primitives for the physical address space monitoring using the structure. The first 3 patches allow the user space users manually set the monitoring regions. The 1st patch implements the feature in the 'damon-dbgfs'. Then, patches for adding a unit tests (the 2nd patch) and updating the documentation (the 3rd patch) follow. Following 4 patches implement the physical address space monitoring primitives. The 4th patch makes some primitive functions for the virtual address spaces primitives reusable. The 5th patch implements the physical address space monitoring primitives. The 6th patch links the primitives to the 'damon-dbgfs'. Finally, 7th patch documents this new features. This patch (of 7): Some 'damon-dbgfs' users would want to monitor only a part of the entire virtual memory address space. The program interface users in the kernel space could use '->before_start()' callback or set the regions inside the context struct as they want, but 'damon-dbgfs' users cannot. For that reason, this introduces a new debugfs file called 'init_region'. 'damon-dbgfs' users can specify which initial monitoring target address regions they want by writing special input to the file. The input should describe each region in each line in the below form: <pid> <start address> <end address> Note that the regions will be updated to cover entire memory mapped regions after a 'regions update interval' is passed. If you want the regions to not be updated after the initial setting, you could set the interval as a very long time, say, a few decades. Link: https://lkml.kernel.org/r/20211012205711.29216-1-sj@kernel.org Link: https://lkml.kernel.org/r/20211012205711.29216-2-sj@kernel.org Signed-off-by: SeongJae Park <sj@kernel.org> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Amit Shah <amit@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Jonathan Corbet <corbet@lwn.net> Cc: David Hildenbrand <david@redhat.com> Cc: David Woodhouse <dwmw@amazon.com> Cc: Marco Elver <elver@google.com> Cc: Leonard Foerster <foersleo@amazon.de> Cc: Greg Thelen <gthelen@google.com> Cc: Markus Boehme <markubo@amazon.de> Cc: David Rienjes <rientjes@google.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Brendan Higgins <brendanhiggins@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-11-05 20:46:42 +00:00
&target_ids_fops, &init_regions_fops, &kdamond_pid_fops};
mm/damon: implement a debugfs-based user space interface DAMON is designed to be used by kernel space code such as the memory management subsystems, and therefore it provides only kernel space API. That said, letting the user space control DAMON could provide some benefits to them. For example, it will allow user space to analyze their specific workloads and make their own special optimizations. For such cases, this commit implements a simple DAMON application kernel module, namely 'damon-dbgfs', which merely wraps the DAMON api and exports those to the user space via the debugfs. 'damon-dbgfs' exports three files, ``attrs``, ``target_ids``, and ``monitor_on`` under its debugfs directory, ``<debugfs>/damon/``. Attributes ---------- Users can read and write the ``sampling interval``, ``aggregation interval``, ``regions update interval``, and min/max number of monitoring target regions by reading from and writing to the ``attrs`` file. For example, below commands set those values to 5 ms, 100 ms, 1,000 ms, 10, 1000 and check it again:: # cd <debugfs>/damon # echo 5000 100000 1000000 10 1000 > attrs # cat attrs 5000 100000 1000000 10 1000 Target IDs ---------- Some types of address spaces supports multiple monitoring target. For example, the virtual memory address spaces monitoring can have multiple processes as the monitoring targets. Users can set the targets by writing relevant id values of the targets to, and get the ids of the current targets by reading from the ``target_ids`` file. In case of the virtual address spaces monitoring, the values should be pids of the monitoring target processes. For example, below commands set processes having pids 42 and 4242 as the monitoring targets and check it again:: # cd <debugfs>/damon # echo 42 4242 > target_ids # cat target_ids 42 4242 Note that setting the target ids doesn't start the monitoring. Turning On/Off -------------- Setting the files as described above doesn't incur effect unless you explicitly start the monitoring. You can start, stop, and check the current status of the monitoring by writing to and reading from the ``monitor_on`` file. Writing ``on`` to the file starts the monitoring of the targets with the attributes. Writing ``off`` to the file stops those. DAMON also stops if every targets are invalidated (in case of the virtual memory monitoring, target processes are invalidated when terminated). Below example commands turn on, off, and check the status of DAMON:: # cd <debugfs>/damon # echo on > monitor_on # echo off > monitor_on # cat monitor_on off Please note that you cannot write to the above-mentioned debugfs files while the monitoring is turned on. If you write to the files while DAMON is running, an error code such as ``-EBUSY`` will be returned. [akpm@linux-foundation.org: remove unneeded "alloc failed" printks] [akpm@linux-foundation.org: replace macro with static inline] Link: https://lkml.kernel.org/r/20210716081449.22187-8-sj38.park@gmail.com Signed-off-by: SeongJae Park <sjpark@amazon.de> Reviewed-by: Leonard Foerster <foersleo@amazon.de> Reviewed-by: Fernand Sieber <sieberf@amazon.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Amit Shah <amit@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Brendan Higgins <brendanhiggins@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: David Woodhouse <dwmw@amazon.com> Cc: Fan Du <fan.du@intel.com> Cc: Greg Kroah-Hartman <greg@kroah.com> Cc: Greg Thelen <gthelen@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joe Perches <joe@perches.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Marco Elver <elver@google.com> Cc: Markus Boehme <markubo@amazon.de> Cc: Maximilian Heyne <mheyne@amazon.de> Cc: Mel Gorman <mgorman@suse.de> Cc: Minchan Kim <minchan@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@surriel.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-08 02:56:53 +00:00
int i;
for (i = 0; i < ARRAY_SIZE(file_names); i++)
debugfs_create_file(file_names[i], 0600, dir, ctx, fops[i]);
}
static void dbgfs_before_terminate(struct damon_ctx *ctx)
mm/damon: implement a debugfs-based user space interface DAMON is designed to be used by kernel space code such as the memory management subsystems, and therefore it provides only kernel space API. That said, letting the user space control DAMON could provide some benefits to them. For example, it will allow user space to analyze their specific workloads and make their own special optimizations. For such cases, this commit implements a simple DAMON application kernel module, namely 'damon-dbgfs', which merely wraps the DAMON api and exports those to the user space via the debugfs. 'damon-dbgfs' exports three files, ``attrs``, ``target_ids``, and ``monitor_on`` under its debugfs directory, ``<debugfs>/damon/``. Attributes ---------- Users can read and write the ``sampling interval``, ``aggregation interval``, ``regions update interval``, and min/max number of monitoring target regions by reading from and writing to the ``attrs`` file. For example, below commands set those values to 5 ms, 100 ms, 1,000 ms, 10, 1000 and check it again:: # cd <debugfs>/damon # echo 5000 100000 1000000 10 1000 > attrs # cat attrs 5000 100000 1000000 10 1000 Target IDs ---------- Some types of address spaces supports multiple monitoring target. For example, the virtual memory address spaces monitoring can have multiple processes as the monitoring targets. Users can set the targets by writing relevant id values of the targets to, and get the ids of the current targets by reading from the ``target_ids`` file. In case of the virtual address spaces monitoring, the values should be pids of the monitoring target processes. For example, below commands set processes having pids 42 and 4242 as the monitoring targets and check it again:: # cd <debugfs>/damon # echo 42 4242 > target_ids # cat target_ids 42 4242 Note that setting the target ids doesn't start the monitoring. Turning On/Off -------------- Setting the files as described above doesn't incur effect unless you explicitly start the monitoring. You can start, stop, and check the current status of the monitoring by writing to and reading from the ``monitor_on`` file. Writing ``on`` to the file starts the monitoring of the targets with the attributes. Writing ``off`` to the file stops those. DAMON also stops if every targets are invalidated (in case of the virtual memory monitoring, target processes are invalidated when terminated). Below example commands turn on, off, and check the status of DAMON:: # cd <debugfs>/damon # echo on > monitor_on # echo off > monitor_on # cat monitor_on off Please note that you cannot write to the above-mentioned debugfs files while the monitoring is turned on. If you write to the files while DAMON is running, an error code such as ``-EBUSY`` will be returned. [akpm@linux-foundation.org: remove unneeded "alloc failed" printks] [akpm@linux-foundation.org: replace macro with static inline] Link: https://lkml.kernel.org/r/20210716081449.22187-8-sj38.park@gmail.com Signed-off-by: SeongJae Park <sjpark@amazon.de> Reviewed-by: Leonard Foerster <foersleo@amazon.de> Reviewed-by: Fernand Sieber <sieberf@amazon.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Amit Shah <amit@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Brendan Higgins <brendanhiggins@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: David Woodhouse <dwmw@amazon.com> Cc: Fan Du <fan.du@intel.com> Cc: Greg Kroah-Hartman <greg@kroah.com> Cc: Greg Thelen <gthelen@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joe Perches <joe@perches.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Marco Elver <elver@google.com> Cc: Markus Boehme <markubo@amazon.de> Cc: Maximilian Heyne <mheyne@amazon.de> Cc: Mel Gorman <mgorman@suse.de> Cc: Minchan Kim <minchan@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@surriel.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-08 02:56:53 +00:00
{
struct damon_target *t, *next;
if (!damon_target_has_pid(ctx))
return;
mm/damon: implement a debugfs-based user space interface DAMON is designed to be used by kernel space code such as the memory management subsystems, and therefore it provides only kernel space API. That said, letting the user space control DAMON could provide some benefits to them. For example, it will allow user space to analyze their specific workloads and make their own special optimizations. For such cases, this commit implements a simple DAMON application kernel module, namely 'damon-dbgfs', which merely wraps the DAMON api and exports those to the user space via the debugfs. 'damon-dbgfs' exports three files, ``attrs``, ``target_ids``, and ``monitor_on`` under its debugfs directory, ``<debugfs>/damon/``. Attributes ---------- Users can read and write the ``sampling interval``, ``aggregation interval``, ``regions update interval``, and min/max number of monitoring target regions by reading from and writing to the ``attrs`` file. For example, below commands set those values to 5 ms, 100 ms, 1,000 ms, 10, 1000 and check it again:: # cd <debugfs>/damon # echo 5000 100000 1000000 10 1000 > attrs # cat attrs 5000 100000 1000000 10 1000 Target IDs ---------- Some types of address spaces supports multiple monitoring target. For example, the virtual memory address spaces monitoring can have multiple processes as the monitoring targets. Users can set the targets by writing relevant id values of the targets to, and get the ids of the current targets by reading from the ``target_ids`` file. In case of the virtual address spaces monitoring, the values should be pids of the monitoring target processes. For example, below commands set processes having pids 42 and 4242 as the monitoring targets and check it again:: # cd <debugfs>/damon # echo 42 4242 > target_ids # cat target_ids 42 4242 Note that setting the target ids doesn't start the monitoring. Turning On/Off -------------- Setting the files as described above doesn't incur effect unless you explicitly start the monitoring. You can start, stop, and check the current status of the monitoring by writing to and reading from the ``monitor_on`` file. Writing ``on`` to the file starts the monitoring of the targets with the attributes. Writing ``off`` to the file stops those. DAMON also stops if every targets are invalidated (in case of the virtual memory monitoring, target processes are invalidated when terminated). Below example commands turn on, off, and check the status of DAMON:: # cd <debugfs>/damon # echo on > monitor_on # echo off > monitor_on # cat monitor_on off Please note that you cannot write to the above-mentioned debugfs files while the monitoring is turned on. If you write to the files while DAMON is running, an error code such as ``-EBUSY`` will be returned. [akpm@linux-foundation.org: remove unneeded "alloc failed" printks] [akpm@linux-foundation.org: replace macro with static inline] Link: https://lkml.kernel.org/r/20210716081449.22187-8-sj38.park@gmail.com Signed-off-by: SeongJae Park <sjpark@amazon.de> Reviewed-by: Leonard Foerster <foersleo@amazon.de> Reviewed-by: Fernand Sieber <sieberf@amazon.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Amit Shah <amit@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Brendan Higgins <brendanhiggins@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: David Woodhouse <dwmw@amazon.com> Cc: Fan Du <fan.du@intel.com> Cc: Greg Kroah-Hartman <greg@kroah.com> Cc: Greg Thelen <gthelen@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joe Perches <joe@perches.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Marco Elver <elver@google.com> Cc: Markus Boehme <markubo@amazon.de> Cc: Maximilian Heyne <mheyne@amazon.de> Cc: Mel Gorman <mgorman@suse.de> Cc: Minchan Kim <minchan@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@surriel.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-08 02:56:53 +00:00
mutex_lock(&ctx->kdamond_lock);
mm/damon: implement a debugfs-based user space interface DAMON is designed to be used by kernel space code such as the memory management subsystems, and therefore it provides only kernel space API. That said, letting the user space control DAMON could provide some benefits to them. For example, it will allow user space to analyze their specific workloads and make their own special optimizations. For such cases, this commit implements a simple DAMON application kernel module, namely 'damon-dbgfs', which merely wraps the DAMON api and exports those to the user space via the debugfs. 'damon-dbgfs' exports three files, ``attrs``, ``target_ids``, and ``monitor_on`` under its debugfs directory, ``<debugfs>/damon/``. Attributes ---------- Users can read and write the ``sampling interval``, ``aggregation interval``, ``regions update interval``, and min/max number of monitoring target regions by reading from and writing to the ``attrs`` file. For example, below commands set those values to 5 ms, 100 ms, 1,000 ms, 10, 1000 and check it again:: # cd <debugfs>/damon # echo 5000 100000 1000000 10 1000 > attrs # cat attrs 5000 100000 1000000 10 1000 Target IDs ---------- Some types of address spaces supports multiple monitoring target. For example, the virtual memory address spaces monitoring can have multiple processes as the monitoring targets. Users can set the targets by writing relevant id values of the targets to, and get the ids of the current targets by reading from the ``target_ids`` file. In case of the virtual address spaces monitoring, the values should be pids of the monitoring target processes. For example, below commands set processes having pids 42 and 4242 as the monitoring targets and check it again:: # cd <debugfs>/damon # echo 42 4242 > target_ids # cat target_ids 42 4242 Note that setting the target ids doesn't start the monitoring. Turning On/Off -------------- Setting the files as described above doesn't incur effect unless you explicitly start the monitoring. You can start, stop, and check the current status of the monitoring by writing to and reading from the ``monitor_on`` file. Writing ``on`` to the file starts the monitoring of the targets with the attributes. Writing ``off`` to the file stops those. DAMON also stops if every targets are invalidated (in case of the virtual memory monitoring, target processes are invalidated when terminated). Below example commands turn on, off, and check the status of DAMON:: # cd <debugfs>/damon # echo on > monitor_on # echo off > monitor_on # cat monitor_on off Please note that you cannot write to the above-mentioned debugfs files while the monitoring is turned on. If you write to the files while DAMON is running, an error code such as ``-EBUSY`` will be returned. [akpm@linux-foundation.org: remove unneeded "alloc failed" printks] [akpm@linux-foundation.org: replace macro with static inline] Link: https://lkml.kernel.org/r/20210716081449.22187-8-sj38.park@gmail.com Signed-off-by: SeongJae Park <sjpark@amazon.de> Reviewed-by: Leonard Foerster <foersleo@amazon.de> Reviewed-by: Fernand Sieber <sieberf@amazon.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Amit Shah <amit@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Brendan Higgins <brendanhiggins@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: David Woodhouse <dwmw@amazon.com> Cc: Fan Du <fan.du@intel.com> Cc: Greg Kroah-Hartman <greg@kroah.com> Cc: Greg Thelen <gthelen@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joe Perches <joe@perches.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Marco Elver <elver@google.com> Cc: Markus Boehme <markubo@amazon.de> Cc: Maximilian Heyne <mheyne@amazon.de> Cc: Mel Gorman <mgorman@suse.de> Cc: Minchan Kim <minchan@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@surriel.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-08 02:56:53 +00:00
damon_for_each_target_safe(t, next, ctx) {
put_pid(t->pid);
mm/damon: implement a debugfs-based user space interface DAMON is designed to be used by kernel space code such as the memory management subsystems, and therefore it provides only kernel space API. That said, letting the user space control DAMON could provide some benefits to them. For example, it will allow user space to analyze their specific workloads and make their own special optimizations. For such cases, this commit implements a simple DAMON application kernel module, namely 'damon-dbgfs', which merely wraps the DAMON api and exports those to the user space via the debugfs. 'damon-dbgfs' exports three files, ``attrs``, ``target_ids``, and ``monitor_on`` under its debugfs directory, ``<debugfs>/damon/``. Attributes ---------- Users can read and write the ``sampling interval``, ``aggregation interval``, ``regions update interval``, and min/max number of monitoring target regions by reading from and writing to the ``attrs`` file. For example, below commands set those values to 5 ms, 100 ms, 1,000 ms, 10, 1000 and check it again:: # cd <debugfs>/damon # echo 5000 100000 1000000 10 1000 > attrs # cat attrs 5000 100000 1000000 10 1000 Target IDs ---------- Some types of address spaces supports multiple monitoring target. For example, the virtual memory address spaces monitoring can have multiple processes as the monitoring targets. Users can set the targets by writing relevant id values of the targets to, and get the ids of the current targets by reading from the ``target_ids`` file. In case of the virtual address spaces monitoring, the values should be pids of the monitoring target processes. For example, below commands set processes having pids 42 and 4242 as the monitoring targets and check it again:: # cd <debugfs>/damon # echo 42 4242 > target_ids # cat target_ids 42 4242 Note that setting the target ids doesn't start the monitoring. Turning On/Off -------------- Setting the files as described above doesn't incur effect unless you explicitly start the monitoring. You can start, stop, and check the current status of the monitoring by writing to and reading from the ``monitor_on`` file. Writing ``on`` to the file starts the monitoring of the targets with the attributes. Writing ``off`` to the file stops those. DAMON also stops if every targets are invalidated (in case of the virtual memory monitoring, target processes are invalidated when terminated). Below example commands turn on, off, and check the status of DAMON:: # cd <debugfs>/damon # echo on > monitor_on # echo off > monitor_on # cat monitor_on off Please note that you cannot write to the above-mentioned debugfs files while the monitoring is turned on. If you write to the files while DAMON is running, an error code such as ``-EBUSY`` will be returned. [akpm@linux-foundation.org: remove unneeded "alloc failed" printks] [akpm@linux-foundation.org: replace macro with static inline] Link: https://lkml.kernel.org/r/20210716081449.22187-8-sj38.park@gmail.com Signed-off-by: SeongJae Park <sjpark@amazon.de> Reviewed-by: Leonard Foerster <foersleo@amazon.de> Reviewed-by: Fernand Sieber <sieberf@amazon.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Amit Shah <amit@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Brendan Higgins <brendanhiggins@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: David Woodhouse <dwmw@amazon.com> Cc: Fan Du <fan.du@intel.com> Cc: Greg Kroah-Hartman <greg@kroah.com> Cc: Greg Thelen <gthelen@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joe Perches <joe@perches.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Marco Elver <elver@google.com> Cc: Markus Boehme <markubo@amazon.de> Cc: Maximilian Heyne <mheyne@amazon.de> Cc: Mel Gorman <mgorman@suse.de> Cc: Minchan Kim <minchan@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@surriel.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-08 02:56:53 +00:00
damon_destroy_target(t);
}
mutex_unlock(&ctx->kdamond_lock);
mm/damon: implement a debugfs-based user space interface DAMON is designed to be used by kernel space code such as the memory management subsystems, and therefore it provides only kernel space API. That said, letting the user space control DAMON could provide some benefits to them. For example, it will allow user space to analyze their specific workloads and make their own special optimizations. For such cases, this commit implements a simple DAMON application kernel module, namely 'damon-dbgfs', which merely wraps the DAMON api and exports those to the user space via the debugfs. 'damon-dbgfs' exports three files, ``attrs``, ``target_ids``, and ``monitor_on`` under its debugfs directory, ``<debugfs>/damon/``. Attributes ---------- Users can read and write the ``sampling interval``, ``aggregation interval``, ``regions update interval``, and min/max number of monitoring target regions by reading from and writing to the ``attrs`` file. For example, below commands set those values to 5 ms, 100 ms, 1,000 ms, 10, 1000 and check it again:: # cd <debugfs>/damon # echo 5000 100000 1000000 10 1000 > attrs # cat attrs 5000 100000 1000000 10 1000 Target IDs ---------- Some types of address spaces supports multiple monitoring target. For example, the virtual memory address spaces monitoring can have multiple processes as the monitoring targets. Users can set the targets by writing relevant id values of the targets to, and get the ids of the current targets by reading from the ``target_ids`` file. In case of the virtual address spaces monitoring, the values should be pids of the monitoring target processes. For example, below commands set processes having pids 42 and 4242 as the monitoring targets and check it again:: # cd <debugfs>/damon # echo 42 4242 > target_ids # cat target_ids 42 4242 Note that setting the target ids doesn't start the monitoring. Turning On/Off -------------- Setting the files as described above doesn't incur effect unless you explicitly start the monitoring. You can start, stop, and check the current status of the monitoring by writing to and reading from the ``monitor_on`` file. Writing ``on`` to the file starts the monitoring of the targets with the attributes. Writing ``off`` to the file stops those. DAMON also stops if every targets are invalidated (in case of the virtual memory monitoring, target processes are invalidated when terminated). Below example commands turn on, off, and check the status of DAMON:: # cd <debugfs>/damon # echo on > monitor_on # echo off > monitor_on # cat monitor_on off Please note that you cannot write to the above-mentioned debugfs files while the monitoring is turned on. If you write to the files while DAMON is running, an error code such as ``-EBUSY`` will be returned. [akpm@linux-foundation.org: remove unneeded "alloc failed" printks] [akpm@linux-foundation.org: replace macro with static inline] Link: https://lkml.kernel.org/r/20210716081449.22187-8-sj38.park@gmail.com Signed-off-by: SeongJae Park <sjpark@amazon.de> Reviewed-by: Leonard Foerster <foersleo@amazon.de> Reviewed-by: Fernand Sieber <sieberf@amazon.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Amit Shah <amit@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Brendan Higgins <brendanhiggins@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: David Woodhouse <dwmw@amazon.com> Cc: Fan Du <fan.du@intel.com> Cc: Greg Kroah-Hartman <greg@kroah.com> Cc: Greg Thelen <gthelen@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joe Perches <joe@perches.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Marco Elver <elver@google.com> Cc: Markus Boehme <markubo@amazon.de> Cc: Maximilian Heyne <mheyne@amazon.de> Cc: Mel Gorman <mgorman@suse.de> Cc: Minchan Kim <minchan@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@surriel.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-08 02:56:53 +00:00
}
static struct damon_ctx *dbgfs_new_ctx(void)
{
struct damon_ctx *ctx;
ctx = damon_new_ctx();
if (!ctx)
return NULL;
if (damon_select_ops(ctx, DAMON_OPS_VADDR) &&
damon_select_ops(ctx, DAMON_OPS_PADDR)) {
damon_destroy_ctx(ctx);
return NULL;
}
mm/damon: implement a debugfs-based user space interface DAMON is designed to be used by kernel space code such as the memory management subsystems, and therefore it provides only kernel space API. That said, letting the user space control DAMON could provide some benefits to them. For example, it will allow user space to analyze their specific workloads and make their own special optimizations. For such cases, this commit implements a simple DAMON application kernel module, namely 'damon-dbgfs', which merely wraps the DAMON api and exports those to the user space via the debugfs. 'damon-dbgfs' exports three files, ``attrs``, ``target_ids``, and ``monitor_on`` under its debugfs directory, ``<debugfs>/damon/``. Attributes ---------- Users can read and write the ``sampling interval``, ``aggregation interval``, ``regions update interval``, and min/max number of monitoring target regions by reading from and writing to the ``attrs`` file. For example, below commands set those values to 5 ms, 100 ms, 1,000 ms, 10, 1000 and check it again:: # cd <debugfs>/damon # echo 5000 100000 1000000 10 1000 > attrs # cat attrs 5000 100000 1000000 10 1000 Target IDs ---------- Some types of address spaces supports multiple monitoring target. For example, the virtual memory address spaces monitoring can have multiple processes as the monitoring targets. Users can set the targets by writing relevant id values of the targets to, and get the ids of the current targets by reading from the ``target_ids`` file. In case of the virtual address spaces monitoring, the values should be pids of the monitoring target processes. For example, below commands set processes having pids 42 and 4242 as the monitoring targets and check it again:: # cd <debugfs>/damon # echo 42 4242 > target_ids # cat target_ids 42 4242 Note that setting the target ids doesn't start the monitoring. Turning On/Off -------------- Setting the files as described above doesn't incur effect unless you explicitly start the monitoring. You can start, stop, and check the current status of the monitoring by writing to and reading from the ``monitor_on`` file. Writing ``on`` to the file starts the monitoring of the targets with the attributes. Writing ``off`` to the file stops those. DAMON also stops if every targets are invalidated (in case of the virtual memory monitoring, target processes are invalidated when terminated). Below example commands turn on, off, and check the status of DAMON:: # cd <debugfs>/damon # echo on > monitor_on # echo off > monitor_on # cat monitor_on off Please note that you cannot write to the above-mentioned debugfs files while the monitoring is turned on. If you write to the files while DAMON is running, an error code such as ``-EBUSY`` will be returned. [akpm@linux-foundation.org: remove unneeded "alloc failed" printks] [akpm@linux-foundation.org: replace macro with static inline] Link: https://lkml.kernel.org/r/20210716081449.22187-8-sj38.park@gmail.com Signed-off-by: SeongJae Park <sjpark@amazon.de> Reviewed-by: Leonard Foerster <foersleo@amazon.de> Reviewed-by: Fernand Sieber <sieberf@amazon.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Amit Shah <amit@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Brendan Higgins <brendanhiggins@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: David Woodhouse <dwmw@amazon.com> Cc: Fan Du <fan.du@intel.com> Cc: Greg Kroah-Hartman <greg@kroah.com> Cc: Greg Thelen <gthelen@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joe Perches <joe@perches.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Marco Elver <elver@google.com> Cc: Markus Boehme <markubo@amazon.de> Cc: Maximilian Heyne <mheyne@amazon.de> Cc: Mel Gorman <mgorman@suse.de> Cc: Minchan Kim <minchan@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@surriel.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-08 02:56:53 +00:00
ctx->callback.before_terminate = dbgfs_before_terminate;
return ctx;
}
mm/damon/dbgfs: support multiple contexts In some use cases, users would want to run multiple monitoring context. For example, if a user wants a high precision monitoring and dedicating multiple CPUs for the job is ok, because DAMON creates one monitoring thread per one context, the user can split the monitoring target regions into multiple small regions and create one context for each region. Or, someone might want to simultaneously monitor different address spaces, e.g., both virtual address space and physical address space. The DAMON's API allows such usage, but 'damon-dbgfs' does not. Therefore, only kernel space DAMON users can do multiple contexts monitoring. This commit allows the user space DAMON users to use multiple contexts monitoring by introducing two new 'damon-dbgfs' debugfs files, 'mk_context' and 'rm_context'. Users can create a new monitoring context by writing the desired name of the new context to 'mk_context'. Then, a new directory with the name and having the files for setting of the context ('attrs', 'target_ids' and 'record') will be created under the debugfs directory. Writing the name of the context to remove to 'rm_context' will remove the related context and directory. Link: https://lkml.kernel.org/r/20210716081449.22187-10-sj38.park@gmail.com Signed-off-by: SeongJae Park <sjpark@amazon.de> Reviewed-by: Fernand Sieber <sieberf@amazon.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Amit Shah <amit@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Brendan Higgins <brendanhiggins@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: David Woodhouse <dwmw@amazon.com> Cc: Fan Du <fan.du@intel.com> Cc: Greg Kroah-Hartman <greg@kroah.com> Cc: Greg Thelen <gthelen@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joe Perches <joe@perches.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Leonard Foerster <foersleo@amazon.de> Cc: Marco Elver <elver@google.com> Cc: Markus Boehme <markubo@amazon.de> Cc: Maximilian Heyne <mheyne@amazon.de> Cc: Mel Gorman <mgorman@suse.de> Cc: Minchan Kim <minchan@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@surriel.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-08 02:57:01 +00:00
static void dbgfs_destroy_ctx(struct damon_ctx *ctx)
{
damon_destroy_ctx(ctx);
}
static ssize_t damon_dbgfs_deprecated_read(struct file *file,
char __user *buf, size_t count, loff_t *ppos)
{
static const char kbuf[512] = DAMON_DBGFS_DEPRECATION_NOTICE;
return simple_read_from_buffer(buf, count, ppos, kbuf, strlen(kbuf));
}
mm/damon/dbgfs: support multiple contexts In some use cases, users would want to run multiple monitoring context. For example, if a user wants a high precision monitoring and dedicating multiple CPUs for the job is ok, because DAMON creates one monitoring thread per one context, the user can split the monitoring target regions into multiple small regions and create one context for each region. Or, someone might want to simultaneously monitor different address spaces, e.g., both virtual address space and physical address space. The DAMON's API allows such usage, but 'damon-dbgfs' does not. Therefore, only kernel space DAMON users can do multiple contexts monitoring. This commit allows the user space DAMON users to use multiple contexts monitoring by introducing two new 'damon-dbgfs' debugfs files, 'mk_context' and 'rm_context'. Users can create a new monitoring context by writing the desired name of the new context to 'mk_context'. Then, a new directory with the name and having the files for setting of the context ('attrs', 'target_ids' and 'record') will be created under the debugfs directory. Writing the name of the context to remove to 'rm_context' will remove the related context and directory. Link: https://lkml.kernel.org/r/20210716081449.22187-10-sj38.park@gmail.com Signed-off-by: SeongJae Park <sjpark@amazon.de> Reviewed-by: Fernand Sieber <sieberf@amazon.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Amit Shah <amit@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Brendan Higgins <brendanhiggins@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: David Woodhouse <dwmw@amazon.com> Cc: Fan Du <fan.du@intel.com> Cc: Greg Kroah-Hartman <greg@kroah.com> Cc: Greg Thelen <gthelen@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joe Perches <joe@perches.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Leonard Foerster <foersleo@amazon.de> Cc: Marco Elver <elver@google.com> Cc: Markus Boehme <markubo@amazon.de> Cc: Maximilian Heyne <mheyne@amazon.de> Cc: Mel Gorman <mgorman@suse.de> Cc: Minchan Kim <minchan@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@surriel.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-08 02:57:01 +00:00
/*
* Make a context of @name and create a debugfs directory for it.
*
* This function should be called while holding damon_dbgfs_lock.
*
* Returns 0 on success, negative error code otherwise.
*/
static int dbgfs_mk_context(char *name)
{
struct dentry *root, **new_dirs, *new_dir;
struct damon_ctx **new_ctxs, *new_ctx;
if (damon_nr_running_ctxs())
return -EBUSY;
new_ctxs = krealloc(dbgfs_ctxs, sizeof(*dbgfs_ctxs) *
(dbgfs_nr_ctxs + 1), GFP_KERNEL);
if (!new_ctxs)
return -ENOMEM;
dbgfs_ctxs = new_ctxs;
new_dirs = krealloc(dbgfs_dirs, sizeof(*dbgfs_dirs) *
(dbgfs_nr_ctxs + 1), GFP_KERNEL);
if (!new_dirs)
return -ENOMEM;
dbgfs_dirs = new_dirs;
root = dbgfs_dirs[0];
if (!root)
return -ENOENT;
new_dir = debugfs_create_dir(name, root);
/* Below check is required for a potential duplicated name case */
if (IS_ERR(new_dir))
return PTR_ERR(new_dir);
mm/damon/dbgfs: support multiple contexts In some use cases, users would want to run multiple monitoring context. For example, if a user wants a high precision monitoring and dedicating multiple CPUs for the job is ok, because DAMON creates one monitoring thread per one context, the user can split the monitoring target regions into multiple small regions and create one context for each region. Or, someone might want to simultaneously monitor different address spaces, e.g., both virtual address space and physical address space. The DAMON's API allows such usage, but 'damon-dbgfs' does not. Therefore, only kernel space DAMON users can do multiple contexts monitoring. This commit allows the user space DAMON users to use multiple contexts monitoring by introducing two new 'damon-dbgfs' debugfs files, 'mk_context' and 'rm_context'. Users can create a new monitoring context by writing the desired name of the new context to 'mk_context'. Then, a new directory with the name and having the files for setting of the context ('attrs', 'target_ids' and 'record') will be created under the debugfs directory. Writing the name of the context to remove to 'rm_context' will remove the related context and directory. Link: https://lkml.kernel.org/r/20210716081449.22187-10-sj38.park@gmail.com Signed-off-by: SeongJae Park <sjpark@amazon.de> Reviewed-by: Fernand Sieber <sieberf@amazon.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Amit Shah <amit@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Brendan Higgins <brendanhiggins@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: David Woodhouse <dwmw@amazon.com> Cc: Fan Du <fan.du@intel.com> Cc: Greg Kroah-Hartman <greg@kroah.com> Cc: Greg Thelen <gthelen@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joe Perches <joe@perches.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Leonard Foerster <foersleo@amazon.de> Cc: Marco Elver <elver@google.com> Cc: Markus Boehme <markubo@amazon.de> Cc: Maximilian Heyne <mheyne@amazon.de> Cc: Mel Gorman <mgorman@suse.de> Cc: Minchan Kim <minchan@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@surriel.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-08 02:57:01 +00:00
dbgfs_dirs[dbgfs_nr_ctxs] = new_dir;
new_ctx = dbgfs_new_ctx();
if (!new_ctx) {
debugfs_remove(new_dir);
dbgfs_dirs[dbgfs_nr_ctxs] = NULL;
return -ENOMEM;
}
dbgfs_ctxs[dbgfs_nr_ctxs] = new_ctx;
dbgfs_fill_ctx_dir(dbgfs_dirs[dbgfs_nr_ctxs],
dbgfs_ctxs[dbgfs_nr_ctxs]);
dbgfs_nr_ctxs++;
return 0;
}
static ssize_t dbgfs_mk_context_write(struct file *file,
const char __user *buf, size_t count, loff_t *ppos)
{
char *kbuf;
char *ctx_name;
ssize_t ret;
mm/damon/dbgfs: support multiple contexts In some use cases, users would want to run multiple monitoring context. For example, if a user wants a high precision monitoring and dedicating multiple CPUs for the job is ok, because DAMON creates one monitoring thread per one context, the user can split the monitoring target regions into multiple small regions and create one context for each region. Or, someone might want to simultaneously monitor different address spaces, e.g., both virtual address space and physical address space. The DAMON's API allows such usage, but 'damon-dbgfs' does not. Therefore, only kernel space DAMON users can do multiple contexts monitoring. This commit allows the user space DAMON users to use multiple contexts monitoring by introducing two new 'damon-dbgfs' debugfs files, 'mk_context' and 'rm_context'. Users can create a new monitoring context by writing the desired name of the new context to 'mk_context'. Then, a new directory with the name and having the files for setting of the context ('attrs', 'target_ids' and 'record') will be created under the debugfs directory. Writing the name of the context to remove to 'rm_context' will remove the related context and directory. Link: https://lkml.kernel.org/r/20210716081449.22187-10-sj38.park@gmail.com Signed-off-by: SeongJae Park <sjpark@amazon.de> Reviewed-by: Fernand Sieber <sieberf@amazon.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Amit Shah <amit@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Brendan Higgins <brendanhiggins@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: David Woodhouse <dwmw@amazon.com> Cc: Fan Du <fan.du@intel.com> Cc: Greg Kroah-Hartman <greg@kroah.com> Cc: Greg Thelen <gthelen@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joe Perches <joe@perches.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Leonard Foerster <foersleo@amazon.de> Cc: Marco Elver <elver@google.com> Cc: Markus Boehme <markubo@amazon.de> Cc: Maximilian Heyne <mheyne@amazon.de> Cc: Mel Gorman <mgorman@suse.de> Cc: Minchan Kim <minchan@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@surriel.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-08 02:57:01 +00:00
kbuf = user_input_str(buf, count, ppos);
if (IS_ERR(kbuf))
return PTR_ERR(kbuf);
ctx_name = kmalloc(count + 1, GFP_KERNEL);
if (!ctx_name) {
kfree(kbuf);
return -ENOMEM;
}
/* Trim white space */
if (sscanf(kbuf, "%s", ctx_name) != 1) {
ret = -EINVAL;
goto out;
}
mutex_lock(&damon_dbgfs_lock);
ret = dbgfs_mk_context(ctx_name);
if (!ret)
ret = count;
mm/damon/dbgfs: support multiple contexts In some use cases, users would want to run multiple monitoring context. For example, if a user wants a high precision monitoring and dedicating multiple CPUs for the job is ok, because DAMON creates one monitoring thread per one context, the user can split the monitoring target regions into multiple small regions and create one context for each region. Or, someone might want to simultaneously monitor different address spaces, e.g., both virtual address space and physical address space. The DAMON's API allows such usage, but 'damon-dbgfs' does not. Therefore, only kernel space DAMON users can do multiple contexts monitoring. This commit allows the user space DAMON users to use multiple contexts monitoring by introducing two new 'damon-dbgfs' debugfs files, 'mk_context' and 'rm_context'. Users can create a new monitoring context by writing the desired name of the new context to 'mk_context'. Then, a new directory with the name and having the files for setting of the context ('attrs', 'target_ids' and 'record') will be created under the debugfs directory. Writing the name of the context to remove to 'rm_context' will remove the related context and directory. Link: https://lkml.kernel.org/r/20210716081449.22187-10-sj38.park@gmail.com Signed-off-by: SeongJae Park <sjpark@amazon.de> Reviewed-by: Fernand Sieber <sieberf@amazon.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Amit Shah <amit@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Brendan Higgins <brendanhiggins@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: David Woodhouse <dwmw@amazon.com> Cc: Fan Du <fan.du@intel.com> Cc: Greg Kroah-Hartman <greg@kroah.com> Cc: Greg Thelen <gthelen@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joe Perches <joe@perches.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Leonard Foerster <foersleo@amazon.de> Cc: Marco Elver <elver@google.com> Cc: Markus Boehme <markubo@amazon.de> Cc: Maximilian Heyne <mheyne@amazon.de> Cc: Mel Gorman <mgorman@suse.de> Cc: Minchan Kim <minchan@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@surriel.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-08 02:57:01 +00:00
mutex_unlock(&damon_dbgfs_lock);
out:
kfree(kbuf);
kfree(ctx_name);
return ret;
}
/*
* Remove a context of @name and its debugfs directory.
*
* This function should be called while holding damon_dbgfs_lock.
*
* Return 0 on success, negative error code otherwise.
*/
static int dbgfs_rm_context(char *name)
{
struct dentry *root, *dir, **new_dirs;
struct inode *inode;
mm/damon/dbgfs: support multiple contexts In some use cases, users would want to run multiple monitoring context. For example, if a user wants a high precision monitoring and dedicating multiple CPUs for the job is ok, because DAMON creates one monitoring thread per one context, the user can split the monitoring target regions into multiple small regions and create one context for each region. Or, someone might want to simultaneously monitor different address spaces, e.g., both virtual address space and physical address space. The DAMON's API allows such usage, but 'damon-dbgfs' does not. Therefore, only kernel space DAMON users can do multiple contexts monitoring. This commit allows the user space DAMON users to use multiple contexts monitoring by introducing two new 'damon-dbgfs' debugfs files, 'mk_context' and 'rm_context'. Users can create a new monitoring context by writing the desired name of the new context to 'mk_context'. Then, a new directory with the name and having the files for setting of the context ('attrs', 'target_ids' and 'record') will be created under the debugfs directory. Writing the name of the context to remove to 'rm_context' will remove the related context and directory. Link: https://lkml.kernel.org/r/20210716081449.22187-10-sj38.park@gmail.com Signed-off-by: SeongJae Park <sjpark@amazon.de> Reviewed-by: Fernand Sieber <sieberf@amazon.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Amit Shah <amit@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Brendan Higgins <brendanhiggins@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: David Woodhouse <dwmw@amazon.com> Cc: Fan Du <fan.du@intel.com> Cc: Greg Kroah-Hartman <greg@kroah.com> Cc: Greg Thelen <gthelen@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joe Perches <joe@perches.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Leonard Foerster <foersleo@amazon.de> Cc: Marco Elver <elver@google.com> Cc: Markus Boehme <markubo@amazon.de> Cc: Maximilian Heyne <mheyne@amazon.de> Cc: Mel Gorman <mgorman@suse.de> Cc: Minchan Kim <minchan@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@surriel.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-08 02:57:01 +00:00
struct damon_ctx **new_ctxs;
int i, j;
int ret = 0;
mm/damon/dbgfs: support multiple contexts In some use cases, users would want to run multiple monitoring context. For example, if a user wants a high precision monitoring and dedicating multiple CPUs for the job is ok, because DAMON creates one monitoring thread per one context, the user can split the monitoring target regions into multiple small regions and create one context for each region. Or, someone might want to simultaneously monitor different address spaces, e.g., both virtual address space and physical address space. The DAMON's API allows such usage, but 'damon-dbgfs' does not. Therefore, only kernel space DAMON users can do multiple contexts monitoring. This commit allows the user space DAMON users to use multiple contexts monitoring by introducing two new 'damon-dbgfs' debugfs files, 'mk_context' and 'rm_context'. Users can create a new monitoring context by writing the desired name of the new context to 'mk_context'. Then, a new directory with the name and having the files for setting of the context ('attrs', 'target_ids' and 'record') will be created under the debugfs directory. Writing the name of the context to remove to 'rm_context' will remove the related context and directory. Link: https://lkml.kernel.org/r/20210716081449.22187-10-sj38.park@gmail.com Signed-off-by: SeongJae Park <sjpark@amazon.de> Reviewed-by: Fernand Sieber <sieberf@amazon.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Amit Shah <amit@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Brendan Higgins <brendanhiggins@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: David Woodhouse <dwmw@amazon.com> Cc: Fan Du <fan.du@intel.com> Cc: Greg Kroah-Hartman <greg@kroah.com> Cc: Greg Thelen <gthelen@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joe Perches <joe@perches.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Leonard Foerster <foersleo@amazon.de> Cc: Marco Elver <elver@google.com> Cc: Markus Boehme <markubo@amazon.de> Cc: Maximilian Heyne <mheyne@amazon.de> Cc: Mel Gorman <mgorman@suse.de> Cc: Minchan Kim <minchan@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@surriel.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-08 02:57:01 +00:00
if (damon_nr_running_ctxs())
return -EBUSY;
root = dbgfs_dirs[0];
if (!root)
return -ENOENT;
dir = debugfs_lookup(name, root);
if (!dir)
return -ENOENT;
inode = d_inode(dir);
if (!S_ISDIR(inode->i_mode)) {
ret = -EINVAL;
goto out_dput;
}
mm/damon/dbgfs: support multiple contexts In some use cases, users would want to run multiple monitoring context. For example, if a user wants a high precision monitoring and dedicating multiple CPUs for the job is ok, because DAMON creates one monitoring thread per one context, the user can split the monitoring target regions into multiple small regions and create one context for each region. Or, someone might want to simultaneously monitor different address spaces, e.g., both virtual address space and physical address space. The DAMON's API allows such usage, but 'damon-dbgfs' does not. Therefore, only kernel space DAMON users can do multiple contexts monitoring. This commit allows the user space DAMON users to use multiple contexts monitoring by introducing two new 'damon-dbgfs' debugfs files, 'mk_context' and 'rm_context'. Users can create a new monitoring context by writing the desired name of the new context to 'mk_context'. Then, a new directory with the name and having the files for setting of the context ('attrs', 'target_ids' and 'record') will be created under the debugfs directory. Writing the name of the context to remove to 'rm_context' will remove the related context and directory. Link: https://lkml.kernel.org/r/20210716081449.22187-10-sj38.park@gmail.com Signed-off-by: SeongJae Park <sjpark@amazon.de> Reviewed-by: Fernand Sieber <sieberf@amazon.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Amit Shah <amit@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Brendan Higgins <brendanhiggins@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: David Woodhouse <dwmw@amazon.com> Cc: Fan Du <fan.du@intel.com> Cc: Greg Kroah-Hartman <greg@kroah.com> Cc: Greg Thelen <gthelen@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joe Perches <joe@perches.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Leonard Foerster <foersleo@amazon.de> Cc: Marco Elver <elver@google.com> Cc: Markus Boehme <markubo@amazon.de> Cc: Maximilian Heyne <mheyne@amazon.de> Cc: Mel Gorman <mgorman@suse.de> Cc: Minchan Kim <minchan@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@surriel.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-08 02:57:01 +00:00
new_dirs = kmalloc_array(dbgfs_nr_ctxs - 1, sizeof(*dbgfs_dirs),
GFP_KERNEL);
if (!new_dirs) {
ret = -ENOMEM;
goto out_dput;
}
mm/damon/dbgfs: support multiple contexts In some use cases, users would want to run multiple monitoring context. For example, if a user wants a high precision monitoring and dedicating multiple CPUs for the job is ok, because DAMON creates one monitoring thread per one context, the user can split the monitoring target regions into multiple small regions and create one context for each region. Or, someone might want to simultaneously monitor different address spaces, e.g., both virtual address space and physical address space. The DAMON's API allows such usage, but 'damon-dbgfs' does not. Therefore, only kernel space DAMON users can do multiple contexts monitoring. This commit allows the user space DAMON users to use multiple contexts monitoring by introducing two new 'damon-dbgfs' debugfs files, 'mk_context' and 'rm_context'. Users can create a new monitoring context by writing the desired name of the new context to 'mk_context'. Then, a new directory with the name and having the files for setting of the context ('attrs', 'target_ids' and 'record') will be created under the debugfs directory. Writing the name of the context to remove to 'rm_context' will remove the related context and directory. Link: https://lkml.kernel.org/r/20210716081449.22187-10-sj38.park@gmail.com Signed-off-by: SeongJae Park <sjpark@amazon.de> Reviewed-by: Fernand Sieber <sieberf@amazon.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Amit Shah <amit@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Brendan Higgins <brendanhiggins@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: David Woodhouse <dwmw@amazon.com> Cc: Fan Du <fan.du@intel.com> Cc: Greg Kroah-Hartman <greg@kroah.com> Cc: Greg Thelen <gthelen@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joe Perches <joe@perches.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Leonard Foerster <foersleo@amazon.de> Cc: Marco Elver <elver@google.com> Cc: Markus Boehme <markubo@amazon.de> Cc: Maximilian Heyne <mheyne@amazon.de> Cc: Mel Gorman <mgorman@suse.de> Cc: Minchan Kim <minchan@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@surriel.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-08 02:57:01 +00:00
new_ctxs = kmalloc_array(dbgfs_nr_ctxs - 1, sizeof(*dbgfs_ctxs),
GFP_KERNEL);
if (!new_ctxs) {
ret = -ENOMEM;
goto out_new_dirs;
mm/damon/dbgfs: support multiple contexts In some use cases, users would want to run multiple monitoring context. For example, if a user wants a high precision monitoring and dedicating multiple CPUs for the job is ok, because DAMON creates one monitoring thread per one context, the user can split the monitoring target regions into multiple small regions and create one context for each region. Or, someone might want to simultaneously monitor different address spaces, e.g., both virtual address space and physical address space. The DAMON's API allows such usage, but 'damon-dbgfs' does not. Therefore, only kernel space DAMON users can do multiple contexts monitoring. This commit allows the user space DAMON users to use multiple contexts monitoring by introducing two new 'damon-dbgfs' debugfs files, 'mk_context' and 'rm_context'. Users can create a new monitoring context by writing the desired name of the new context to 'mk_context'. Then, a new directory with the name and having the files for setting of the context ('attrs', 'target_ids' and 'record') will be created under the debugfs directory. Writing the name of the context to remove to 'rm_context' will remove the related context and directory. Link: https://lkml.kernel.org/r/20210716081449.22187-10-sj38.park@gmail.com Signed-off-by: SeongJae Park <sjpark@amazon.de> Reviewed-by: Fernand Sieber <sieberf@amazon.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Amit Shah <amit@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Brendan Higgins <brendanhiggins@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: David Woodhouse <dwmw@amazon.com> Cc: Fan Du <fan.du@intel.com> Cc: Greg Kroah-Hartman <greg@kroah.com> Cc: Greg Thelen <gthelen@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joe Perches <joe@perches.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Leonard Foerster <foersleo@amazon.de> Cc: Marco Elver <elver@google.com> Cc: Markus Boehme <markubo@amazon.de> Cc: Maximilian Heyne <mheyne@amazon.de> Cc: Mel Gorman <mgorman@suse.de> Cc: Minchan Kim <minchan@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@surriel.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-08 02:57:01 +00:00
}
for (i = 0, j = 0; i < dbgfs_nr_ctxs; i++) {
if (dbgfs_dirs[i] == dir) {
debugfs_remove(dbgfs_dirs[i]);
dbgfs_destroy_ctx(dbgfs_ctxs[i]);
continue;
}
new_dirs[j] = dbgfs_dirs[i];
new_ctxs[j++] = dbgfs_ctxs[i];
}
kfree(dbgfs_dirs);
kfree(dbgfs_ctxs);
dbgfs_dirs = new_dirs;
dbgfs_ctxs = new_ctxs;
dbgfs_nr_ctxs--;
goto out_dput;
out_new_dirs:
kfree(new_dirs);
out_dput:
dput(dir);
return ret;
mm/damon/dbgfs: support multiple contexts In some use cases, users would want to run multiple monitoring context. For example, if a user wants a high precision monitoring and dedicating multiple CPUs for the job is ok, because DAMON creates one monitoring thread per one context, the user can split the monitoring target regions into multiple small regions and create one context for each region. Or, someone might want to simultaneously monitor different address spaces, e.g., both virtual address space and physical address space. The DAMON's API allows such usage, but 'damon-dbgfs' does not. Therefore, only kernel space DAMON users can do multiple contexts monitoring. This commit allows the user space DAMON users to use multiple contexts monitoring by introducing two new 'damon-dbgfs' debugfs files, 'mk_context' and 'rm_context'. Users can create a new monitoring context by writing the desired name of the new context to 'mk_context'. Then, a new directory with the name and having the files for setting of the context ('attrs', 'target_ids' and 'record') will be created under the debugfs directory. Writing the name of the context to remove to 'rm_context' will remove the related context and directory. Link: https://lkml.kernel.org/r/20210716081449.22187-10-sj38.park@gmail.com Signed-off-by: SeongJae Park <sjpark@amazon.de> Reviewed-by: Fernand Sieber <sieberf@amazon.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Amit Shah <amit@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Brendan Higgins <brendanhiggins@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: David Woodhouse <dwmw@amazon.com> Cc: Fan Du <fan.du@intel.com> Cc: Greg Kroah-Hartman <greg@kroah.com> Cc: Greg Thelen <gthelen@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joe Perches <joe@perches.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Leonard Foerster <foersleo@amazon.de> Cc: Marco Elver <elver@google.com> Cc: Markus Boehme <markubo@amazon.de> Cc: Maximilian Heyne <mheyne@amazon.de> Cc: Mel Gorman <mgorman@suse.de> Cc: Minchan Kim <minchan@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@surriel.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-08 02:57:01 +00:00
}
static ssize_t dbgfs_rm_context_write(struct file *file,
const char __user *buf, size_t count, loff_t *ppos)
{
char *kbuf;
ssize_t ret;
mm/damon/dbgfs: support multiple contexts In some use cases, users would want to run multiple monitoring context. For example, if a user wants a high precision monitoring and dedicating multiple CPUs for the job is ok, because DAMON creates one monitoring thread per one context, the user can split the monitoring target regions into multiple small regions and create one context for each region. Or, someone might want to simultaneously monitor different address spaces, e.g., both virtual address space and physical address space. The DAMON's API allows such usage, but 'damon-dbgfs' does not. Therefore, only kernel space DAMON users can do multiple contexts monitoring. This commit allows the user space DAMON users to use multiple contexts monitoring by introducing two new 'damon-dbgfs' debugfs files, 'mk_context' and 'rm_context'. Users can create a new monitoring context by writing the desired name of the new context to 'mk_context'. Then, a new directory with the name and having the files for setting of the context ('attrs', 'target_ids' and 'record') will be created under the debugfs directory. Writing the name of the context to remove to 'rm_context' will remove the related context and directory. Link: https://lkml.kernel.org/r/20210716081449.22187-10-sj38.park@gmail.com Signed-off-by: SeongJae Park <sjpark@amazon.de> Reviewed-by: Fernand Sieber <sieberf@amazon.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Amit Shah <amit@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Brendan Higgins <brendanhiggins@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: David Woodhouse <dwmw@amazon.com> Cc: Fan Du <fan.du@intel.com> Cc: Greg Kroah-Hartman <greg@kroah.com> Cc: Greg Thelen <gthelen@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joe Perches <joe@perches.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Leonard Foerster <foersleo@amazon.de> Cc: Marco Elver <elver@google.com> Cc: Markus Boehme <markubo@amazon.de> Cc: Maximilian Heyne <mheyne@amazon.de> Cc: Mel Gorman <mgorman@suse.de> Cc: Minchan Kim <minchan@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@surriel.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-08 02:57:01 +00:00
char *ctx_name;
kbuf = user_input_str(buf, count, ppos);
if (IS_ERR(kbuf))
return PTR_ERR(kbuf);
ctx_name = kmalloc(count + 1, GFP_KERNEL);
if (!ctx_name) {
kfree(kbuf);
return -ENOMEM;
}
/* Trim white space */
if (sscanf(kbuf, "%s", ctx_name) != 1) {
ret = -EINVAL;
goto out;
}
mutex_lock(&damon_dbgfs_lock);
ret = dbgfs_rm_context(ctx_name);
if (!ret)
ret = count;
mm/damon/dbgfs: support multiple contexts In some use cases, users would want to run multiple monitoring context. For example, if a user wants a high precision monitoring and dedicating multiple CPUs for the job is ok, because DAMON creates one monitoring thread per one context, the user can split the monitoring target regions into multiple small regions and create one context for each region. Or, someone might want to simultaneously monitor different address spaces, e.g., both virtual address space and physical address space. The DAMON's API allows such usage, but 'damon-dbgfs' does not. Therefore, only kernel space DAMON users can do multiple contexts monitoring. This commit allows the user space DAMON users to use multiple contexts monitoring by introducing two new 'damon-dbgfs' debugfs files, 'mk_context' and 'rm_context'. Users can create a new monitoring context by writing the desired name of the new context to 'mk_context'. Then, a new directory with the name and having the files for setting of the context ('attrs', 'target_ids' and 'record') will be created under the debugfs directory. Writing the name of the context to remove to 'rm_context' will remove the related context and directory. Link: https://lkml.kernel.org/r/20210716081449.22187-10-sj38.park@gmail.com Signed-off-by: SeongJae Park <sjpark@amazon.de> Reviewed-by: Fernand Sieber <sieberf@amazon.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Amit Shah <amit@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Brendan Higgins <brendanhiggins@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: David Woodhouse <dwmw@amazon.com> Cc: Fan Du <fan.du@intel.com> Cc: Greg Kroah-Hartman <greg@kroah.com> Cc: Greg Thelen <gthelen@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joe Perches <joe@perches.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Leonard Foerster <foersleo@amazon.de> Cc: Marco Elver <elver@google.com> Cc: Markus Boehme <markubo@amazon.de> Cc: Maximilian Heyne <mheyne@amazon.de> Cc: Mel Gorman <mgorman@suse.de> Cc: Minchan Kim <minchan@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@surriel.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-08 02:57:01 +00:00
mutex_unlock(&damon_dbgfs_lock);
out:
kfree(kbuf);
kfree(ctx_name);
return ret;
}
mm/damon: implement a debugfs-based user space interface DAMON is designed to be used by kernel space code such as the memory management subsystems, and therefore it provides only kernel space API. That said, letting the user space control DAMON could provide some benefits to them. For example, it will allow user space to analyze their specific workloads and make their own special optimizations. For such cases, this commit implements a simple DAMON application kernel module, namely 'damon-dbgfs', which merely wraps the DAMON api and exports those to the user space via the debugfs. 'damon-dbgfs' exports three files, ``attrs``, ``target_ids``, and ``monitor_on`` under its debugfs directory, ``<debugfs>/damon/``. Attributes ---------- Users can read and write the ``sampling interval``, ``aggregation interval``, ``regions update interval``, and min/max number of monitoring target regions by reading from and writing to the ``attrs`` file. For example, below commands set those values to 5 ms, 100 ms, 1,000 ms, 10, 1000 and check it again:: # cd <debugfs>/damon # echo 5000 100000 1000000 10 1000 > attrs # cat attrs 5000 100000 1000000 10 1000 Target IDs ---------- Some types of address spaces supports multiple monitoring target. For example, the virtual memory address spaces monitoring can have multiple processes as the monitoring targets. Users can set the targets by writing relevant id values of the targets to, and get the ids of the current targets by reading from the ``target_ids`` file. In case of the virtual address spaces monitoring, the values should be pids of the monitoring target processes. For example, below commands set processes having pids 42 and 4242 as the monitoring targets and check it again:: # cd <debugfs>/damon # echo 42 4242 > target_ids # cat target_ids 42 4242 Note that setting the target ids doesn't start the monitoring. Turning On/Off -------------- Setting the files as described above doesn't incur effect unless you explicitly start the monitoring. You can start, stop, and check the current status of the monitoring by writing to and reading from the ``monitor_on`` file. Writing ``on`` to the file starts the monitoring of the targets with the attributes. Writing ``off`` to the file stops those. DAMON also stops if every targets are invalidated (in case of the virtual memory monitoring, target processes are invalidated when terminated). Below example commands turn on, off, and check the status of DAMON:: # cd <debugfs>/damon # echo on > monitor_on # echo off > monitor_on # cat monitor_on off Please note that you cannot write to the above-mentioned debugfs files while the monitoring is turned on. If you write to the files while DAMON is running, an error code such as ``-EBUSY`` will be returned. [akpm@linux-foundation.org: remove unneeded "alloc failed" printks] [akpm@linux-foundation.org: replace macro with static inline] Link: https://lkml.kernel.org/r/20210716081449.22187-8-sj38.park@gmail.com Signed-off-by: SeongJae Park <sjpark@amazon.de> Reviewed-by: Leonard Foerster <foersleo@amazon.de> Reviewed-by: Fernand Sieber <sieberf@amazon.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Amit Shah <amit@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Brendan Higgins <brendanhiggins@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: David Woodhouse <dwmw@amazon.com> Cc: Fan Du <fan.du@intel.com> Cc: Greg Kroah-Hartman <greg@kroah.com> Cc: Greg Thelen <gthelen@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joe Perches <joe@perches.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Marco Elver <elver@google.com> Cc: Markus Boehme <markubo@amazon.de> Cc: Maximilian Heyne <mheyne@amazon.de> Cc: Mel Gorman <mgorman@suse.de> Cc: Minchan Kim <minchan@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@surriel.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-08 02:56:53 +00:00
static ssize_t dbgfs_monitor_on_read(struct file *file,
char __user *buf, size_t count, loff_t *ppos)
{
char monitor_on_buf[5];
bool monitor_on = damon_nr_running_ctxs() != 0;
int len;
len = scnprintf(monitor_on_buf, 5, monitor_on ? "on\n" : "off\n");
return simple_read_from_buffer(buf, count, ppos, monitor_on_buf, len);
}
static ssize_t dbgfs_monitor_on_write(struct file *file,
const char __user *buf, size_t count, loff_t *ppos)
{
ssize_t ret;
mm/damon: implement a debugfs-based user space interface DAMON is designed to be used by kernel space code such as the memory management subsystems, and therefore it provides only kernel space API. That said, letting the user space control DAMON could provide some benefits to them. For example, it will allow user space to analyze their specific workloads and make their own special optimizations. For such cases, this commit implements a simple DAMON application kernel module, namely 'damon-dbgfs', which merely wraps the DAMON api and exports those to the user space via the debugfs. 'damon-dbgfs' exports three files, ``attrs``, ``target_ids``, and ``monitor_on`` under its debugfs directory, ``<debugfs>/damon/``. Attributes ---------- Users can read and write the ``sampling interval``, ``aggregation interval``, ``regions update interval``, and min/max number of monitoring target regions by reading from and writing to the ``attrs`` file. For example, below commands set those values to 5 ms, 100 ms, 1,000 ms, 10, 1000 and check it again:: # cd <debugfs>/damon # echo 5000 100000 1000000 10 1000 > attrs # cat attrs 5000 100000 1000000 10 1000 Target IDs ---------- Some types of address spaces supports multiple monitoring target. For example, the virtual memory address spaces monitoring can have multiple processes as the monitoring targets. Users can set the targets by writing relevant id values of the targets to, and get the ids of the current targets by reading from the ``target_ids`` file. In case of the virtual address spaces monitoring, the values should be pids of the monitoring target processes. For example, below commands set processes having pids 42 and 4242 as the monitoring targets and check it again:: # cd <debugfs>/damon # echo 42 4242 > target_ids # cat target_ids 42 4242 Note that setting the target ids doesn't start the monitoring. Turning On/Off -------------- Setting the files as described above doesn't incur effect unless you explicitly start the monitoring. You can start, stop, and check the current status of the monitoring by writing to and reading from the ``monitor_on`` file. Writing ``on`` to the file starts the monitoring of the targets with the attributes. Writing ``off`` to the file stops those. DAMON also stops if every targets are invalidated (in case of the virtual memory monitoring, target processes are invalidated when terminated). Below example commands turn on, off, and check the status of DAMON:: # cd <debugfs>/damon # echo on > monitor_on # echo off > monitor_on # cat monitor_on off Please note that you cannot write to the above-mentioned debugfs files while the monitoring is turned on. If you write to the files while DAMON is running, an error code such as ``-EBUSY`` will be returned. [akpm@linux-foundation.org: remove unneeded "alloc failed" printks] [akpm@linux-foundation.org: replace macro with static inline] Link: https://lkml.kernel.org/r/20210716081449.22187-8-sj38.park@gmail.com Signed-off-by: SeongJae Park <sjpark@amazon.de> Reviewed-by: Leonard Foerster <foersleo@amazon.de> Reviewed-by: Fernand Sieber <sieberf@amazon.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Amit Shah <amit@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Brendan Higgins <brendanhiggins@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: David Woodhouse <dwmw@amazon.com> Cc: Fan Du <fan.du@intel.com> Cc: Greg Kroah-Hartman <greg@kroah.com> Cc: Greg Thelen <gthelen@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joe Perches <joe@perches.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Marco Elver <elver@google.com> Cc: Markus Boehme <markubo@amazon.de> Cc: Maximilian Heyne <mheyne@amazon.de> Cc: Mel Gorman <mgorman@suse.de> Cc: Minchan Kim <minchan@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@surriel.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-08 02:56:53 +00:00
char *kbuf;
kbuf = user_input_str(buf, count, ppos);
if (IS_ERR(kbuf))
return PTR_ERR(kbuf);
/* Remove white space */
if (sscanf(kbuf, "%s", kbuf) != 1) {
kfree(kbuf);
return -EINVAL;
}
mutex_lock(&damon_dbgfs_lock);
if (!strncmp(kbuf, "on", count)) {
int i;
for (i = 0; i < dbgfs_nr_ctxs; i++) {
if (damon_targets_empty(dbgfs_ctxs[i])) {
kfree(kbuf);
mutex_unlock(&damon_dbgfs_lock);
return -EINVAL;
}
}
mm/damon/core: allow non-exclusive DAMON start/stop Patch series "Introduce DAMON sysfs interface", v3. Introduction ============ DAMON's debugfs-based user interface (DAMON_DBGFS) served very well, so far. However, it unnecessarily depends on debugfs, while DAMON is not aimed to be used for only debugging. Also, the interface receives multiple values via one file. For example, schemes file receives 18 values. As a result, it is inefficient, hard to be used, and difficult to be extended. Especially, keeping backward compatibility of user space tools is getting only challenging. It would be better to implement another reliable and flexible interface and deprecate DAMON_DBGFS in long term. For the reason, this patchset introduces a sysfs-based new user interface of DAMON. The idea of the new interface is, using directory hierarchies and having one dedicated file for each value. For a short example, users can do the virtual address monitoring via the interface as below: # cd /sys/kernel/mm/damon/admin/ # echo 1 > kdamonds/nr_kdamonds # echo 1 > kdamonds/0/contexts/nr_contexts # echo vaddr > kdamonds/0/contexts/0/operations # echo 1 > kdamonds/0/contexts/0/targets/nr_targets # echo $(pidof <workload>) > kdamonds/0/contexts/0/targets/0/pid_target # echo on > kdamonds/0/state A brief representation of the files hierarchy of DAMON sysfs interface is as below. Childs are represented with indentation, directories are having '/' suffix, and files in each directory are separated by comma. /sys/kernel/mm/damon/admin │ kdamonds/nr_kdamonds │ │ 0/state,pid │ │ │ contexts/nr_contexts │ │ │ │ 0/operations │ │ │ │ │ monitoring_attrs/ │ │ │ │ │ │ intervals/sample_us,aggr_us,update_us │ │ │ │ │ │ nr_regions/min,max │ │ │ │ │ targets/nr_targets │ │ │ │ │ │ 0/pid_target │ │ │ │ │ │ │ regions/nr_regions │ │ │ │ │ │ │ │ 0/start,end │ │ │ │ │ │ │ │ ... │ │ │ │ │ │ ... │ │ │ │ │ schemes/nr_schemes │ │ │ │ │ │ 0/action │ │ │ │ │ │ │ access_pattern/ │ │ │ │ │ │ │ │ sz/min,max │ │ │ │ │ │ │ │ nr_accesses/min,max │ │ │ │ │ │ │ │ age/min,max │ │ │ │ │ │ │ quotas/ms,bytes,reset_interval_ms │ │ │ │ │ │ │ │ weights/sz_permil,nr_accesses_permil,age_permil │ │ │ │ │ │ │ watermarks/metric,interval_us,high,mid,low │ │ │ │ │ │ │ stats/nr_tried,sz_tried,nr_applied,sz_applied,qt_exceeds │ │ │ │ │ │ ... │ │ │ │ ... │ │ ... Detailed usage of the files will be described in the final Documentation patch of this patchset. Main Difference Between DAMON_DBGFS and DAMON_SYSFS --------------------------------------------------- At the moment, DAMON_DBGFS and DAMON_SYSFS provides same features. One important difference between them is their exclusiveness. DAMON_DBGFS works in an exclusive manner, so that no DAMON worker thread (kdamond) in the system can run concurrently and interfere somehow. For the reason, DAMON_DBGFS asks users to construct all monitoring contexts and start them at once. It's not a big problem but makes the operation a little bit complex and unflexible. For more flexible usage, DAMON_SYSFS moves the responsibility of preventing any possible interference to the admins and work in a non-exclusive manner. That is, users can configure and start contexts one by one. Note that DAMON respects both exclusive groups and non-exclusive groups of contexts, in a manner similar to that of reader-writer locks. That is, if any exclusive monitoring contexts (e.g., contexts that started via DAMON_DBGFS) are running, DAMON_SYSFS does not start new contexts, and vice versa. Future Plan of DAMON_DBGFS Deprecation ====================================== Once this patchset is merged, DAMON_DBGFS development will be frozen. That is, we will maintain it to work as is now so that no users will be break. But, it will not be extended to provide any new feature of DAMON. The support will be continued only until next LTS release. After that, we will drop DAMON_DBGFS. User-space Tooling Compatibility -------------------------------- As DAMON_SYSFS provides all features of DAMON_DBGFS, all user space tooling can move to DAMON_SYSFS. As we will continue supporting DAMON_DBGFS until next LTS kernel release, user space tools would have enough time to move to DAMON_SYSFS. The official user space tool, damo[1], is already supporting both DAMON_SYSFS and DAMON_DBGFS. Both correctness tests[2] and performance tests[3] of DAMON using DAMON_SYSFS also passed. [1] https://github.com/awslabs/damo [2] https://github.com/awslabs/damon-tests/tree/master/corr [3] https://github.com/awslabs/damon-tests/tree/master/perf Sequence of Patches =================== First two patches (patches 1-2) make core changes for DAMON_SYSFS. The first one (patch 1) allows non-exclusive DAMON contexts so that DAMON_SYSFS can work in non-exclusive mode, while the second one (patch 2) adds size of DAMON enum types so that DAMON API users can safely iterate the enums. Third patch (patch 3) implements basic sysfs stub for virtual address spaces monitoring. Note that this implements only sysfs files and DAMON is not linked. Fourth patch (patch 4) links the DAMON_SYSFS to DAMON so that users can control DAMON using the sysfs files. Following six patches (patches 5-10) implements other DAMON features that DAMON_DBGFS supports one by one (physical address space monitoring, DAMON-based operation schemes, schemes quotas, schemes prioritization weights, schemes watermarks, and schemes stats). Following patch (patch 11) adds a simple selftest for DAMON_SYSFS, and the final one (patch 12) documents DAMON_SYSFS. This patch (of 13): To avoid interference between DAMON contexts monitoring overlapping memory regions, damon_start() works in an exclusive manner. That is, damon_start() does nothing bug fails if any context that started by another instance of the function is still running. This makes its usage a little bit restrictive. However, admins could aware each DAMON usage and address such interferences on their own in some cases. This commit hence implements non-exclusive mode of the function and allows the callers to select the mode. Note that the exclusive groups and non-exclusive groups of contexts will respect each other in a manner similar to that of reader-writer locks. Therefore, this commit will not cause any behavioral change to the exclusive groups. Link: https://lkml.kernel.org/r/20220228081314.5770-1-sj@kernel.org Link: https://lkml.kernel.org/r/20220228081314.5770-2-sj@kernel.org Signed-off-by: SeongJae Park <sj@kernel.org> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Shuah Khan <skhan@linuxfoundation.org> Cc: David Rientjes <rientjes@google.com> Cc: Xin Hao <xhao@linux.alibaba.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-03-22 21:49:21 +00:00
ret = damon_start(dbgfs_ctxs, dbgfs_nr_ctxs, true);
} else if (!strncmp(kbuf, "off", count)) {
ret = damon_stop(dbgfs_ctxs, dbgfs_nr_ctxs);
} else {
ret = -EINVAL;
}
mutex_unlock(&damon_dbgfs_lock);
mm/damon: implement a debugfs-based user space interface DAMON is designed to be used by kernel space code such as the memory management subsystems, and therefore it provides only kernel space API. That said, letting the user space control DAMON could provide some benefits to them. For example, it will allow user space to analyze their specific workloads and make their own special optimizations. For such cases, this commit implements a simple DAMON application kernel module, namely 'damon-dbgfs', which merely wraps the DAMON api and exports those to the user space via the debugfs. 'damon-dbgfs' exports three files, ``attrs``, ``target_ids``, and ``monitor_on`` under its debugfs directory, ``<debugfs>/damon/``. Attributes ---------- Users can read and write the ``sampling interval``, ``aggregation interval``, ``regions update interval``, and min/max number of monitoring target regions by reading from and writing to the ``attrs`` file. For example, below commands set those values to 5 ms, 100 ms, 1,000 ms, 10, 1000 and check it again:: # cd <debugfs>/damon # echo 5000 100000 1000000 10 1000 > attrs # cat attrs 5000 100000 1000000 10 1000 Target IDs ---------- Some types of address spaces supports multiple monitoring target. For example, the virtual memory address spaces monitoring can have multiple processes as the monitoring targets. Users can set the targets by writing relevant id values of the targets to, and get the ids of the current targets by reading from the ``target_ids`` file. In case of the virtual address spaces monitoring, the values should be pids of the monitoring target processes. For example, below commands set processes having pids 42 and 4242 as the monitoring targets and check it again:: # cd <debugfs>/damon # echo 42 4242 > target_ids # cat target_ids 42 4242 Note that setting the target ids doesn't start the monitoring. Turning On/Off -------------- Setting the files as described above doesn't incur effect unless you explicitly start the monitoring. You can start, stop, and check the current status of the monitoring by writing to and reading from the ``monitor_on`` file. Writing ``on`` to the file starts the monitoring of the targets with the attributes. Writing ``off`` to the file stops those. DAMON also stops if every targets are invalidated (in case of the virtual memory monitoring, target processes are invalidated when terminated). Below example commands turn on, off, and check the status of DAMON:: # cd <debugfs>/damon # echo on > monitor_on # echo off > monitor_on # cat monitor_on off Please note that you cannot write to the above-mentioned debugfs files while the monitoring is turned on. If you write to the files while DAMON is running, an error code such as ``-EBUSY`` will be returned. [akpm@linux-foundation.org: remove unneeded "alloc failed" printks] [akpm@linux-foundation.org: replace macro with static inline] Link: https://lkml.kernel.org/r/20210716081449.22187-8-sj38.park@gmail.com Signed-off-by: SeongJae Park <sjpark@amazon.de> Reviewed-by: Leonard Foerster <foersleo@amazon.de> Reviewed-by: Fernand Sieber <sieberf@amazon.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Amit Shah <amit@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Brendan Higgins <brendanhiggins@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: David Woodhouse <dwmw@amazon.com> Cc: Fan Du <fan.du@intel.com> Cc: Greg Kroah-Hartman <greg@kroah.com> Cc: Greg Thelen <gthelen@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joe Perches <joe@perches.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Marco Elver <elver@google.com> Cc: Markus Boehme <markubo@amazon.de> Cc: Maximilian Heyne <mheyne@amazon.de> Cc: Mel Gorman <mgorman@suse.de> Cc: Minchan Kim <minchan@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@surriel.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-08 02:56:53 +00:00
if (!ret)
ret = count;
mm/damon: implement a debugfs-based user space interface DAMON is designed to be used by kernel space code such as the memory management subsystems, and therefore it provides only kernel space API. That said, letting the user space control DAMON could provide some benefits to them. For example, it will allow user space to analyze their specific workloads and make their own special optimizations. For such cases, this commit implements a simple DAMON application kernel module, namely 'damon-dbgfs', which merely wraps the DAMON api and exports those to the user space via the debugfs. 'damon-dbgfs' exports three files, ``attrs``, ``target_ids``, and ``monitor_on`` under its debugfs directory, ``<debugfs>/damon/``. Attributes ---------- Users can read and write the ``sampling interval``, ``aggregation interval``, ``regions update interval``, and min/max number of monitoring target regions by reading from and writing to the ``attrs`` file. For example, below commands set those values to 5 ms, 100 ms, 1,000 ms, 10, 1000 and check it again:: # cd <debugfs>/damon # echo 5000 100000 1000000 10 1000 > attrs # cat attrs 5000 100000 1000000 10 1000 Target IDs ---------- Some types of address spaces supports multiple monitoring target. For example, the virtual memory address spaces monitoring can have multiple processes as the monitoring targets. Users can set the targets by writing relevant id values of the targets to, and get the ids of the current targets by reading from the ``target_ids`` file. In case of the virtual address spaces monitoring, the values should be pids of the monitoring target processes. For example, below commands set processes having pids 42 and 4242 as the monitoring targets and check it again:: # cd <debugfs>/damon # echo 42 4242 > target_ids # cat target_ids 42 4242 Note that setting the target ids doesn't start the monitoring. Turning On/Off -------------- Setting the files as described above doesn't incur effect unless you explicitly start the monitoring. You can start, stop, and check the current status of the monitoring by writing to and reading from the ``monitor_on`` file. Writing ``on`` to the file starts the monitoring of the targets with the attributes. Writing ``off`` to the file stops those. DAMON also stops if every targets are invalidated (in case of the virtual memory monitoring, target processes are invalidated when terminated). Below example commands turn on, off, and check the status of DAMON:: # cd <debugfs>/damon # echo on > monitor_on # echo off > monitor_on # cat monitor_on off Please note that you cannot write to the above-mentioned debugfs files while the monitoring is turned on. If you write to the files while DAMON is running, an error code such as ``-EBUSY`` will be returned. [akpm@linux-foundation.org: remove unneeded "alloc failed" printks] [akpm@linux-foundation.org: replace macro with static inline] Link: https://lkml.kernel.org/r/20210716081449.22187-8-sj38.park@gmail.com Signed-off-by: SeongJae Park <sjpark@amazon.de> Reviewed-by: Leonard Foerster <foersleo@amazon.de> Reviewed-by: Fernand Sieber <sieberf@amazon.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Amit Shah <amit@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Brendan Higgins <brendanhiggins@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: David Woodhouse <dwmw@amazon.com> Cc: Fan Du <fan.du@intel.com> Cc: Greg Kroah-Hartman <greg@kroah.com> Cc: Greg Thelen <gthelen@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joe Perches <joe@perches.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Marco Elver <elver@google.com> Cc: Markus Boehme <markubo@amazon.de> Cc: Maximilian Heyne <mheyne@amazon.de> Cc: Mel Gorman <mgorman@suse.de> Cc: Minchan Kim <minchan@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@surriel.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-08 02:56:53 +00:00
kfree(kbuf);
return ret;
}
static int damon_dbgfs_static_file_open(struct inode *inode, struct file *file)
{
damon_dbgfs_warn_deprecation();
return nonseekable_open(inode, file);
}
static const struct file_operations deprecated_fops = {
.read = damon_dbgfs_deprecated_read,
};
mm/damon/dbgfs: support multiple contexts In some use cases, users would want to run multiple monitoring context. For example, if a user wants a high precision monitoring and dedicating multiple CPUs for the job is ok, because DAMON creates one monitoring thread per one context, the user can split the monitoring target regions into multiple small regions and create one context for each region. Or, someone might want to simultaneously monitor different address spaces, e.g., both virtual address space and physical address space. The DAMON's API allows such usage, but 'damon-dbgfs' does not. Therefore, only kernel space DAMON users can do multiple contexts monitoring. This commit allows the user space DAMON users to use multiple contexts monitoring by introducing two new 'damon-dbgfs' debugfs files, 'mk_context' and 'rm_context'. Users can create a new monitoring context by writing the desired name of the new context to 'mk_context'. Then, a new directory with the name and having the files for setting of the context ('attrs', 'target_ids' and 'record') will be created under the debugfs directory. Writing the name of the context to remove to 'rm_context' will remove the related context and directory. Link: https://lkml.kernel.org/r/20210716081449.22187-10-sj38.park@gmail.com Signed-off-by: SeongJae Park <sjpark@amazon.de> Reviewed-by: Fernand Sieber <sieberf@amazon.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Amit Shah <amit@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Brendan Higgins <brendanhiggins@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: David Woodhouse <dwmw@amazon.com> Cc: Fan Du <fan.du@intel.com> Cc: Greg Kroah-Hartman <greg@kroah.com> Cc: Greg Thelen <gthelen@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joe Perches <joe@perches.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Leonard Foerster <foersleo@amazon.de> Cc: Marco Elver <elver@google.com> Cc: Markus Boehme <markubo@amazon.de> Cc: Maximilian Heyne <mheyne@amazon.de> Cc: Mel Gorman <mgorman@suse.de> Cc: Minchan Kim <minchan@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@surriel.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-08 02:57:01 +00:00
static const struct file_operations mk_contexts_fops = {
.open = damon_dbgfs_static_file_open,
mm/damon/dbgfs: support multiple contexts In some use cases, users would want to run multiple monitoring context. For example, if a user wants a high precision monitoring and dedicating multiple CPUs for the job is ok, because DAMON creates one monitoring thread per one context, the user can split the monitoring target regions into multiple small regions and create one context for each region. Or, someone might want to simultaneously monitor different address spaces, e.g., both virtual address space and physical address space. The DAMON's API allows such usage, but 'damon-dbgfs' does not. Therefore, only kernel space DAMON users can do multiple contexts monitoring. This commit allows the user space DAMON users to use multiple contexts monitoring by introducing two new 'damon-dbgfs' debugfs files, 'mk_context' and 'rm_context'. Users can create a new monitoring context by writing the desired name of the new context to 'mk_context'. Then, a new directory with the name and having the files for setting of the context ('attrs', 'target_ids' and 'record') will be created under the debugfs directory. Writing the name of the context to remove to 'rm_context' will remove the related context and directory. Link: https://lkml.kernel.org/r/20210716081449.22187-10-sj38.park@gmail.com Signed-off-by: SeongJae Park <sjpark@amazon.de> Reviewed-by: Fernand Sieber <sieberf@amazon.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Amit Shah <amit@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Brendan Higgins <brendanhiggins@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: David Woodhouse <dwmw@amazon.com> Cc: Fan Du <fan.du@intel.com> Cc: Greg Kroah-Hartman <greg@kroah.com> Cc: Greg Thelen <gthelen@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joe Perches <joe@perches.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Leonard Foerster <foersleo@amazon.de> Cc: Marco Elver <elver@google.com> Cc: Markus Boehme <markubo@amazon.de> Cc: Maximilian Heyne <mheyne@amazon.de> Cc: Mel Gorman <mgorman@suse.de> Cc: Minchan Kim <minchan@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@surriel.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-08 02:57:01 +00:00
.write = dbgfs_mk_context_write,
};
static const struct file_operations rm_contexts_fops = {
.open = damon_dbgfs_static_file_open,
mm/damon/dbgfs: support multiple contexts In some use cases, users would want to run multiple monitoring context. For example, if a user wants a high precision monitoring and dedicating multiple CPUs for the job is ok, because DAMON creates one monitoring thread per one context, the user can split the monitoring target regions into multiple small regions and create one context for each region. Or, someone might want to simultaneously monitor different address spaces, e.g., both virtual address space and physical address space. The DAMON's API allows such usage, but 'damon-dbgfs' does not. Therefore, only kernel space DAMON users can do multiple contexts monitoring. This commit allows the user space DAMON users to use multiple contexts monitoring by introducing two new 'damon-dbgfs' debugfs files, 'mk_context' and 'rm_context'. Users can create a new monitoring context by writing the desired name of the new context to 'mk_context'. Then, a new directory with the name and having the files for setting of the context ('attrs', 'target_ids' and 'record') will be created under the debugfs directory. Writing the name of the context to remove to 'rm_context' will remove the related context and directory. Link: https://lkml.kernel.org/r/20210716081449.22187-10-sj38.park@gmail.com Signed-off-by: SeongJae Park <sjpark@amazon.de> Reviewed-by: Fernand Sieber <sieberf@amazon.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Amit Shah <amit@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Brendan Higgins <brendanhiggins@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: David Woodhouse <dwmw@amazon.com> Cc: Fan Du <fan.du@intel.com> Cc: Greg Kroah-Hartman <greg@kroah.com> Cc: Greg Thelen <gthelen@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joe Perches <joe@perches.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Leonard Foerster <foersleo@amazon.de> Cc: Marco Elver <elver@google.com> Cc: Markus Boehme <markubo@amazon.de> Cc: Maximilian Heyne <mheyne@amazon.de> Cc: Mel Gorman <mgorman@suse.de> Cc: Minchan Kim <minchan@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@surriel.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-08 02:57:01 +00:00
.write = dbgfs_rm_context_write,
};
mm/damon: implement a debugfs-based user space interface DAMON is designed to be used by kernel space code such as the memory management subsystems, and therefore it provides only kernel space API. That said, letting the user space control DAMON could provide some benefits to them. For example, it will allow user space to analyze their specific workloads and make their own special optimizations. For such cases, this commit implements a simple DAMON application kernel module, namely 'damon-dbgfs', which merely wraps the DAMON api and exports those to the user space via the debugfs. 'damon-dbgfs' exports three files, ``attrs``, ``target_ids``, and ``monitor_on`` under its debugfs directory, ``<debugfs>/damon/``. Attributes ---------- Users can read and write the ``sampling interval``, ``aggregation interval``, ``regions update interval``, and min/max number of monitoring target regions by reading from and writing to the ``attrs`` file. For example, below commands set those values to 5 ms, 100 ms, 1,000 ms, 10, 1000 and check it again:: # cd <debugfs>/damon # echo 5000 100000 1000000 10 1000 > attrs # cat attrs 5000 100000 1000000 10 1000 Target IDs ---------- Some types of address spaces supports multiple monitoring target. For example, the virtual memory address spaces monitoring can have multiple processes as the monitoring targets. Users can set the targets by writing relevant id values of the targets to, and get the ids of the current targets by reading from the ``target_ids`` file. In case of the virtual address spaces monitoring, the values should be pids of the monitoring target processes. For example, below commands set processes having pids 42 and 4242 as the monitoring targets and check it again:: # cd <debugfs>/damon # echo 42 4242 > target_ids # cat target_ids 42 4242 Note that setting the target ids doesn't start the monitoring. Turning On/Off -------------- Setting the files as described above doesn't incur effect unless you explicitly start the monitoring. You can start, stop, and check the current status of the monitoring by writing to and reading from the ``monitor_on`` file. Writing ``on`` to the file starts the monitoring of the targets with the attributes. Writing ``off`` to the file stops those. DAMON also stops if every targets are invalidated (in case of the virtual memory monitoring, target processes are invalidated when terminated). Below example commands turn on, off, and check the status of DAMON:: # cd <debugfs>/damon # echo on > monitor_on # echo off > monitor_on # cat monitor_on off Please note that you cannot write to the above-mentioned debugfs files while the monitoring is turned on. If you write to the files while DAMON is running, an error code such as ``-EBUSY`` will be returned. [akpm@linux-foundation.org: remove unneeded "alloc failed" printks] [akpm@linux-foundation.org: replace macro with static inline] Link: https://lkml.kernel.org/r/20210716081449.22187-8-sj38.park@gmail.com Signed-off-by: SeongJae Park <sjpark@amazon.de> Reviewed-by: Leonard Foerster <foersleo@amazon.de> Reviewed-by: Fernand Sieber <sieberf@amazon.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Amit Shah <amit@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Brendan Higgins <brendanhiggins@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: David Woodhouse <dwmw@amazon.com> Cc: Fan Du <fan.du@intel.com> Cc: Greg Kroah-Hartman <greg@kroah.com> Cc: Greg Thelen <gthelen@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joe Perches <joe@perches.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Marco Elver <elver@google.com> Cc: Markus Boehme <markubo@amazon.de> Cc: Maximilian Heyne <mheyne@amazon.de> Cc: Mel Gorman <mgorman@suse.de> Cc: Minchan Kim <minchan@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@surriel.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-08 02:56:53 +00:00
static const struct file_operations monitor_on_fops = {
.open = damon_dbgfs_static_file_open,
mm/damon: implement a debugfs-based user space interface DAMON is designed to be used by kernel space code such as the memory management subsystems, and therefore it provides only kernel space API. That said, letting the user space control DAMON could provide some benefits to them. For example, it will allow user space to analyze their specific workloads and make their own special optimizations. For such cases, this commit implements a simple DAMON application kernel module, namely 'damon-dbgfs', which merely wraps the DAMON api and exports those to the user space via the debugfs. 'damon-dbgfs' exports three files, ``attrs``, ``target_ids``, and ``monitor_on`` under its debugfs directory, ``<debugfs>/damon/``. Attributes ---------- Users can read and write the ``sampling interval``, ``aggregation interval``, ``regions update interval``, and min/max number of monitoring target regions by reading from and writing to the ``attrs`` file. For example, below commands set those values to 5 ms, 100 ms, 1,000 ms, 10, 1000 and check it again:: # cd <debugfs>/damon # echo 5000 100000 1000000 10 1000 > attrs # cat attrs 5000 100000 1000000 10 1000 Target IDs ---------- Some types of address spaces supports multiple monitoring target. For example, the virtual memory address spaces monitoring can have multiple processes as the monitoring targets. Users can set the targets by writing relevant id values of the targets to, and get the ids of the current targets by reading from the ``target_ids`` file. In case of the virtual address spaces monitoring, the values should be pids of the monitoring target processes. For example, below commands set processes having pids 42 and 4242 as the monitoring targets and check it again:: # cd <debugfs>/damon # echo 42 4242 > target_ids # cat target_ids 42 4242 Note that setting the target ids doesn't start the monitoring. Turning On/Off -------------- Setting the files as described above doesn't incur effect unless you explicitly start the monitoring. You can start, stop, and check the current status of the monitoring by writing to and reading from the ``monitor_on`` file. Writing ``on`` to the file starts the monitoring of the targets with the attributes. Writing ``off`` to the file stops those. DAMON also stops if every targets are invalidated (in case of the virtual memory monitoring, target processes are invalidated when terminated). Below example commands turn on, off, and check the status of DAMON:: # cd <debugfs>/damon # echo on > monitor_on # echo off > monitor_on # cat monitor_on off Please note that you cannot write to the above-mentioned debugfs files while the monitoring is turned on. If you write to the files while DAMON is running, an error code such as ``-EBUSY`` will be returned. [akpm@linux-foundation.org: remove unneeded "alloc failed" printks] [akpm@linux-foundation.org: replace macro with static inline] Link: https://lkml.kernel.org/r/20210716081449.22187-8-sj38.park@gmail.com Signed-off-by: SeongJae Park <sjpark@amazon.de> Reviewed-by: Leonard Foerster <foersleo@amazon.de> Reviewed-by: Fernand Sieber <sieberf@amazon.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Amit Shah <amit@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Brendan Higgins <brendanhiggins@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: David Woodhouse <dwmw@amazon.com> Cc: Fan Du <fan.du@intel.com> Cc: Greg Kroah-Hartman <greg@kroah.com> Cc: Greg Thelen <gthelen@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joe Perches <joe@perches.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Marco Elver <elver@google.com> Cc: Markus Boehme <markubo@amazon.de> Cc: Maximilian Heyne <mheyne@amazon.de> Cc: Mel Gorman <mgorman@suse.de> Cc: Minchan Kim <minchan@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@surriel.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-08 02:56:53 +00:00
.read = dbgfs_monitor_on_read,
.write = dbgfs_monitor_on_write,
};
static int __init __damon_dbgfs_init(void)
{
struct dentry *dbgfs_root;
mm/damon/dbgfs: support multiple contexts In some use cases, users would want to run multiple monitoring context. For example, if a user wants a high precision monitoring and dedicating multiple CPUs for the job is ok, because DAMON creates one monitoring thread per one context, the user can split the monitoring target regions into multiple small regions and create one context for each region. Or, someone might want to simultaneously monitor different address spaces, e.g., both virtual address space and physical address space. The DAMON's API allows such usage, but 'damon-dbgfs' does not. Therefore, only kernel space DAMON users can do multiple contexts monitoring. This commit allows the user space DAMON users to use multiple contexts monitoring by introducing two new 'damon-dbgfs' debugfs files, 'mk_context' and 'rm_context'. Users can create a new monitoring context by writing the desired name of the new context to 'mk_context'. Then, a new directory with the name and having the files for setting of the context ('attrs', 'target_ids' and 'record') will be created under the debugfs directory. Writing the name of the context to remove to 'rm_context' will remove the related context and directory. Link: https://lkml.kernel.org/r/20210716081449.22187-10-sj38.park@gmail.com Signed-off-by: SeongJae Park <sjpark@amazon.de> Reviewed-by: Fernand Sieber <sieberf@amazon.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Amit Shah <amit@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Brendan Higgins <brendanhiggins@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: David Woodhouse <dwmw@amazon.com> Cc: Fan Du <fan.du@intel.com> Cc: Greg Kroah-Hartman <greg@kroah.com> Cc: Greg Thelen <gthelen@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joe Perches <joe@perches.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Leonard Foerster <foersleo@amazon.de> Cc: Marco Elver <elver@google.com> Cc: Markus Boehme <markubo@amazon.de> Cc: Maximilian Heyne <mheyne@amazon.de> Cc: Mel Gorman <mgorman@suse.de> Cc: Minchan Kim <minchan@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@surriel.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-08 02:57:01 +00:00
const char * const file_names[] = {"mk_contexts", "rm_contexts",
"monitor_on_DEPRECATED", "DEPRECATED"};
mm/damon/dbgfs: support multiple contexts In some use cases, users would want to run multiple monitoring context. For example, if a user wants a high precision monitoring and dedicating multiple CPUs for the job is ok, because DAMON creates one monitoring thread per one context, the user can split the monitoring target regions into multiple small regions and create one context for each region. Or, someone might want to simultaneously monitor different address spaces, e.g., both virtual address space and physical address space. The DAMON's API allows such usage, but 'damon-dbgfs' does not. Therefore, only kernel space DAMON users can do multiple contexts monitoring. This commit allows the user space DAMON users to use multiple contexts monitoring by introducing two new 'damon-dbgfs' debugfs files, 'mk_context' and 'rm_context'. Users can create a new monitoring context by writing the desired name of the new context to 'mk_context'. Then, a new directory with the name and having the files for setting of the context ('attrs', 'target_ids' and 'record') will be created under the debugfs directory. Writing the name of the context to remove to 'rm_context' will remove the related context and directory. Link: https://lkml.kernel.org/r/20210716081449.22187-10-sj38.park@gmail.com Signed-off-by: SeongJae Park <sjpark@amazon.de> Reviewed-by: Fernand Sieber <sieberf@amazon.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Amit Shah <amit@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Brendan Higgins <brendanhiggins@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: David Woodhouse <dwmw@amazon.com> Cc: Fan Du <fan.du@intel.com> Cc: Greg Kroah-Hartman <greg@kroah.com> Cc: Greg Thelen <gthelen@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joe Perches <joe@perches.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Leonard Foerster <foersleo@amazon.de> Cc: Marco Elver <elver@google.com> Cc: Markus Boehme <markubo@amazon.de> Cc: Maximilian Heyne <mheyne@amazon.de> Cc: Mel Gorman <mgorman@suse.de> Cc: Minchan Kim <minchan@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@surriel.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-08 02:57:01 +00:00
const struct file_operations *fops[] = {&mk_contexts_fops,
&rm_contexts_fops, &monitor_on_fops, &deprecated_fops};
mm/damon: implement a debugfs-based user space interface DAMON is designed to be used by kernel space code such as the memory management subsystems, and therefore it provides only kernel space API. That said, letting the user space control DAMON could provide some benefits to them. For example, it will allow user space to analyze their specific workloads and make their own special optimizations. For such cases, this commit implements a simple DAMON application kernel module, namely 'damon-dbgfs', which merely wraps the DAMON api and exports those to the user space via the debugfs. 'damon-dbgfs' exports three files, ``attrs``, ``target_ids``, and ``monitor_on`` under its debugfs directory, ``<debugfs>/damon/``. Attributes ---------- Users can read and write the ``sampling interval``, ``aggregation interval``, ``regions update interval``, and min/max number of monitoring target regions by reading from and writing to the ``attrs`` file. For example, below commands set those values to 5 ms, 100 ms, 1,000 ms, 10, 1000 and check it again:: # cd <debugfs>/damon # echo 5000 100000 1000000 10 1000 > attrs # cat attrs 5000 100000 1000000 10 1000 Target IDs ---------- Some types of address spaces supports multiple monitoring target. For example, the virtual memory address spaces monitoring can have multiple processes as the monitoring targets. Users can set the targets by writing relevant id values of the targets to, and get the ids of the current targets by reading from the ``target_ids`` file. In case of the virtual address spaces monitoring, the values should be pids of the monitoring target processes. For example, below commands set processes having pids 42 and 4242 as the monitoring targets and check it again:: # cd <debugfs>/damon # echo 42 4242 > target_ids # cat target_ids 42 4242 Note that setting the target ids doesn't start the monitoring. Turning On/Off -------------- Setting the files as described above doesn't incur effect unless you explicitly start the monitoring. You can start, stop, and check the current status of the monitoring by writing to and reading from the ``monitor_on`` file. Writing ``on`` to the file starts the monitoring of the targets with the attributes. Writing ``off`` to the file stops those. DAMON also stops if every targets are invalidated (in case of the virtual memory monitoring, target processes are invalidated when terminated). Below example commands turn on, off, and check the status of DAMON:: # cd <debugfs>/damon # echo on > monitor_on # echo off > monitor_on # cat monitor_on off Please note that you cannot write to the above-mentioned debugfs files while the monitoring is turned on. If you write to the files while DAMON is running, an error code such as ``-EBUSY`` will be returned. [akpm@linux-foundation.org: remove unneeded "alloc failed" printks] [akpm@linux-foundation.org: replace macro with static inline] Link: https://lkml.kernel.org/r/20210716081449.22187-8-sj38.park@gmail.com Signed-off-by: SeongJae Park <sjpark@amazon.de> Reviewed-by: Leonard Foerster <foersleo@amazon.de> Reviewed-by: Fernand Sieber <sieberf@amazon.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Amit Shah <amit@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Brendan Higgins <brendanhiggins@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: David Woodhouse <dwmw@amazon.com> Cc: Fan Du <fan.du@intel.com> Cc: Greg Kroah-Hartman <greg@kroah.com> Cc: Greg Thelen <gthelen@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joe Perches <joe@perches.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Marco Elver <elver@google.com> Cc: Markus Boehme <markubo@amazon.de> Cc: Maximilian Heyne <mheyne@amazon.de> Cc: Mel Gorman <mgorman@suse.de> Cc: Minchan Kim <minchan@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@surriel.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-08 02:56:53 +00:00
int i;
dbgfs_root = debugfs_create_dir("damon", NULL);
for (i = 0; i < ARRAY_SIZE(file_names); i++)
debugfs_create_file(file_names[i], 0600, dbgfs_root, NULL,
fops[i]);
dbgfs_fill_ctx_dir(dbgfs_root, dbgfs_ctxs[0]);
dbgfs_dirs = kmalloc(sizeof(dbgfs_root), GFP_KERNEL);
mm/damon: implement a debugfs-based user space interface DAMON is designed to be used by kernel space code such as the memory management subsystems, and therefore it provides only kernel space API. That said, letting the user space control DAMON could provide some benefits to them. For example, it will allow user space to analyze their specific workloads and make their own special optimizations. For such cases, this commit implements a simple DAMON application kernel module, namely 'damon-dbgfs', which merely wraps the DAMON api and exports those to the user space via the debugfs. 'damon-dbgfs' exports three files, ``attrs``, ``target_ids``, and ``monitor_on`` under its debugfs directory, ``<debugfs>/damon/``. Attributes ---------- Users can read and write the ``sampling interval``, ``aggregation interval``, ``regions update interval``, and min/max number of monitoring target regions by reading from and writing to the ``attrs`` file. For example, below commands set those values to 5 ms, 100 ms, 1,000 ms, 10, 1000 and check it again:: # cd <debugfs>/damon # echo 5000 100000 1000000 10 1000 > attrs # cat attrs 5000 100000 1000000 10 1000 Target IDs ---------- Some types of address spaces supports multiple monitoring target. For example, the virtual memory address spaces monitoring can have multiple processes as the monitoring targets. Users can set the targets by writing relevant id values of the targets to, and get the ids of the current targets by reading from the ``target_ids`` file. In case of the virtual address spaces monitoring, the values should be pids of the monitoring target processes. For example, below commands set processes having pids 42 and 4242 as the monitoring targets and check it again:: # cd <debugfs>/damon # echo 42 4242 > target_ids # cat target_ids 42 4242 Note that setting the target ids doesn't start the monitoring. Turning On/Off -------------- Setting the files as described above doesn't incur effect unless you explicitly start the monitoring. You can start, stop, and check the current status of the monitoring by writing to and reading from the ``monitor_on`` file. Writing ``on`` to the file starts the monitoring of the targets with the attributes. Writing ``off`` to the file stops those. DAMON also stops if every targets are invalidated (in case of the virtual memory monitoring, target processes are invalidated when terminated). Below example commands turn on, off, and check the status of DAMON:: # cd <debugfs>/damon # echo on > monitor_on # echo off > monitor_on # cat monitor_on off Please note that you cannot write to the above-mentioned debugfs files while the monitoring is turned on. If you write to the files while DAMON is running, an error code such as ``-EBUSY`` will be returned. [akpm@linux-foundation.org: remove unneeded "alloc failed" printks] [akpm@linux-foundation.org: replace macro with static inline] Link: https://lkml.kernel.org/r/20210716081449.22187-8-sj38.park@gmail.com Signed-off-by: SeongJae Park <sjpark@amazon.de> Reviewed-by: Leonard Foerster <foersleo@amazon.de> Reviewed-by: Fernand Sieber <sieberf@amazon.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Amit Shah <amit@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Brendan Higgins <brendanhiggins@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: David Woodhouse <dwmw@amazon.com> Cc: Fan Du <fan.du@intel.com> Cc: Greg Kroah-Hartman <greg@kroah.com> Cc: Greg Thelen <gthelen@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joe Perches <joe@perches.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Marco Elver <elver@google.com> Cc: Markus Boehme <markubo@amazon.de> Cc: Maximilian Heyne <mheyne@amazon.de> Cc: Mel Gorman <mgorman@suse.de> Cc: Minchan Kim <minchan@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@surriel.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-08 02:56:53 +00:00
if (!dbgfs_dirs) {
debugfs_remove(dbgfs_root);
return -ENOMEM;
}
dbgfs_dirs[0] = dbgfs_root;
return 0;
}
/*
* Functions for the initialization
*/
static int __init damon_dbgfs_init(void)
{
int rc = -ENOMEM;
mm/damon: implement a debugfs-based user space interface DAMON is designed to be used by kernel space code such as the memory management subsystems, and therefore it provides only kernel space API. That said, letting the user space control DAMON could provide some benefits to them. For example, it will allow user space to analyze their specific workloads and make their own special optimizations. For such cases, this commit implements a simple DAMON application kernel module, namely 'damon-dbgfs', which merely wraps the DAMON api and exports those to the user space via the debugfs. 'damon-dbgfs' exports three files, ``attrs``, ``target_ids``, and ``monitor_on`` under its debugfs directory, ``<debugfs>/damon/``. Attributes ---------- Users can read and write the ``sampling interval``, ``aggregation interval``, ``regions update interval``, and min/max number of monitoring target regions by reading from and writing to the ``attrs`` file. For example, below commands set those values to 5 ms, 100 ms, 1,000 ms, 10, 1000 and check it again:: # cd <debugfs>/damon # echo 5000 100000 1000000 10 1000 > attrs # cat attrs 5000 100000 1000000 10 1000 Target IDs ---------- Some types of address spaces supports multiple monitoring target. For example, the virtual memory address spaces monitoring can have multiple processes as the monitoring targets. Users can set the targets by writing relevant id values of the targets to, and get the ids of the current targets by reading from the ``target_ids`` file. In case of the virtual address spaces monitoring, the values should be pids of the monitoring target processes. For example, below commands set processes having pids 42 and 4242 as the monitoring targets and check it again:: # cd <debugfs>/damon # echo 42 4242 > target_ids # cat target_ids 42 4242 Note that setting the target ids doesn't start the monitoring. Turning On/Off -------------- Setting the files as described above doesn't incur effect unless you explicitly start the monitoring. You can start, stop, and check the current status of the monitoring by writing to and reading from the ``monitor_on`` file. Writing ``on`` to the file starts the monitoring of the targets with the attributes. Writing ``off`` to the file stops those. DAMON also stops if every targets are invalidated (in case of the virtual memory monitoring, target processes are invalidated when terminated). Below example commands turn on, off, and check the status of DAMON:: # cd <debugfs>/damon # echo on > monitor_on # echo off > monitor_on # cat monitor_on off Please note that you cannot write to the above-mentioned debugfs files while the monitoring is turned on. If you write to the files while DAMON is running, an error code such as ``-EBUSY`` will be returned. [akpm@linux-foundation.org: remove unneeded "alloc failed" printks] [akpm@linux-foundation.org: replace macro with static inline] Link: https://lkml.kernel.org/r/20210716081449.22187-8-sj38.park@gmail.com Signed-off-by: SeongJae Park <sjpark@amazon.de> Reviewed-by: Leonard Foerster <foersleo@amazon.de> Reviewed-by: Fernand Sieber <sieberf@amazon.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Amit Shah <amit@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Brendan Higgins <brendanhiggins@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: David Woodhouse <dwmw@amazon.com> Cc: Fan Du <fan.du@intel.com> Cc: Greg Kroah-Hartman <greg@kroah.com> Cc: Greg Thelen <gthelen@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joe Perches <joe@perches.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Marco Elver <elver@google.com> Cc: Markus Boehme <markubo@amazon.de> Cc: Maximilian Heyne <mheyne@amazon.de> Cc: Mel Gorman <mgorman@suse.de> Cc: Minchan Kim <minchan@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@surriel.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-08 02:56:53 +00:00
mutex_lock(&damon_dbgfs_lock);
mm/damon: implement a debugfs-based user space interface DAMON is designed to be used by kernel space code such as the memory management subsystems, and therefore it provides only kernel space API. That said, letting the user space control DAMON could provide some benefits to them. For example, it will allow user space to analyze their specific workloads and make their own special optimizations. For such cases, this commit implements a simple DAMON application kernel module, namely 'damon-dbgfs', which merely wraps the DAMON api and exports those to the user space via the debugfs. 'damon-dbgfs' exports three files, ``attrs``, ``target_ids``, and ``monitor_on`` under its debugfs directory, ``<debugfs>/damon/``. Attributes ---------- Users can read and write the ``sampling interval``, ``aggregation interval``, ``regions update interval``, and min/max number of monitoring target regions by reading from and writing to the ``attrs`` file. For example, below commands set those values to 5 ms, 100 ms, 1,000 ms, 10, 1000 and check it again:: # cd <debugfs>/damon # echo 5000 100000 1000000 10 1000 > attrs # cat attrs 5000 100000 1000000 10 1000 Target IDs ---------- Some types of address spaces supports multiple monitoring target. For example, the virtual memory address spaces monitoring can have multiple processes as the monitoring targets. Users can set the targets by writing relevant id values of the targets to, and get the ids of the current targets by reading from the ``target_ids`` file. In case of the virtual address spaces monitoring, the values should be pids of the monitoring target processes. For example, below commands set processes having pids 42 and 4242 as the monitoring targets and check it again:: # cd <debugfs>/damon # echo 42 4242 > target_ids # cat target_ids 42 4242 Note that setting the target ids doesn't start the monitoring. Turning On/Off -------------- Setting the files as described above doesn't incur effect unless you explicitly start the monitoring. You can start, stop, and check the current status of the monitoring by writing to and reading from the ``monitor_on`` file. Writing ``on`` to the file starts the monitoring of the targets with the attributes. Writing ``off`` to the file stops those. DAMON also stops if every targets are invalidated (in case of the virtual memory monitoring, target processes are invalidated when terminated). Below example commands turn on, off, and check the status of DAMON:: # cd <debugfs>/damon # echo on > monitor_on # echo off > monitor_on # cat monitor_on off Please note that you cannot write to the above-mentioned debugfs files while the monitoring is turned on. If you write to the files while DAMON is running, an error code such as ``-EBUSY`` will be returned. [akpm@linux-foundation.org: remove unneeded "alloc failed" printks] [akpm@linux-foundation.org: replace macro with static inline] Link: https://lkml.kernel.org/r/20210716081449.22187-8-sj38.park@gmail.com Signed-off-by: SeongJae Park <sjpark@amazon.de> Reviewed-by: Leonard Foerster <foersleo@amazon.de> Reviewed-by: Fernand Sieber <sieberf@amazon.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Amit Shah <amit@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Brendan Higgins <brendanhiggins@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: David Woodhouse <dwmw@amazon.com> Cc: Fan Du <fan.du@intel.com> Cc: Greg Kroah-Hartman <greg@kroah.com> Cc: Greg Thelen <gthelen@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joe Perches <joe@perches.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Marco Elver <elver@google.com> Cc: Markus Boehme <markubo@amazon.de> Cc: Maximilian Heyne <mheyne@amazon.de> Cc: Mel Gorman <mgorman@suse.de> Cc: Minchan Kim <minchan@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@surriel.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-08 02:56:53 +00:00
dbgfs_ctxs = kmalloc(sizeof(*dbgfs_ctxs), GFP_KERNEL);
if (!dbgfs_ctxs)
goto out;
mm/damon: implement a debugfs-based user space interface DAMON is designed to be used by kernel space code such as the memory management subsystems, and therefore it provides only kernel space API. That said, letting the user space control DAMON could provide some benefits to them. For example, it will allow user space to analyze their specific workloads and make their own special optimizations. For such cases, this commit implements a simple DAMON application kernel module, namely 'damon-dbgfs', which merely wraps the DAMON api and exports those to the user space via the debugfs. 'damon-dbgfs' exports three files, ``attrs``, ``target_ids``, and ``monitor_on`` under its debugfs directory, ``<debugfs>/damon/``. Attributes ---------- Users can read and write the ``sampling interval``, ``aggregation interval``, ``regions update interval``, and min/max number of monitoring target regions by reading from and writing to the ``attrs`` file. For example, below commands set those values to 5 ms, 100 ms, 1,000 ms, 10, 1000 and check it again:: # cd <debugfs>/damon # echo 5000 100000 1000000 10 1000 > attrs # cat attrs 5000 100000 1000000 10 1000 Target IDs ---------- Some types of address spaces supports multiple monitoring target. For example, the virtual memory address spaces monitoring can have multiple processes as the monitoring targets. Users can set the targets by writing relevant id values of the targets to, and get the ids of the current targets by reading from the ``target_ids`` file. In case of the virtual address spaces monitoring, the values should be pids of the monitoring target processes. For example, below commands set processes having pids 42 and 4242 as the monitoring targets and check it again:: # cd <debugfs>/damon # echo 42 4242 > target_ids # cat target_ids 42 4242 Note that setting the target ids doesn't start the monitoring. Turning On/Off -------------- Setting the files as described above doesn't incur effect unless you explicitly start the monitoring. You can start, stop, and check the current status of the monitoring by writing to and reading from the ``monitor_on`` file. Writing ``on`` to the file starts the monitoring of the targets with the attributes. Writing ``off`` to the file stops those. DAMON also stops if every targets are invalidated (in case of the virtual memory monitoring, target processes are invalidated when terminated). Below example commands turn on, off, and check the status of DAMON:: # cd <debugfs>/damon # echo on > monitor_on # echo off > monitor_on # cat monitor_on off Please note that you cannot write to the above-mentioned debugfs files while the monitoring is turned on. If you write to the files while DAMON is running, an error code such as ``-EBUSY`` will be returned. [akpm@linux-foundation.org: remove unneeded "alloc failed" printks] [akpm@linux-foundation.org: replace macro with static inline] Link: https://lkml.kernel.org/r/20210716081449.22187-8-sj38.park@gmail.com Signed-off-by: SeongJae Park <sjpark@amazon.de> Reviewed-by: Leonard Foerster <foersleo@amazon.de> Reviewed-by: Fernand Sieber <sieberf@amazon.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Amit Shah <amit@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Brendan Higgins <brendanhiggins@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: David Woodhouse <dwmw@amazon.com> Cc: Fan Du <fan.du@intel.com> Cc: Greg Kroah-Hartman <greg@kroah.com> Cc: Greg Thelen <gthelen@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joe Perches <joe@perches.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Marco Elver <elver@google.com> Cc: Markus Boehme <markubo@amazon.de> Cc: Maximilian Heyne <mheyne@amazon.de> Cc: Mel Gorman <mgorman@suse.de> Cc: Minchan Kim <minchan@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@surriel.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-08 02:56:53 +00:00
dbgfs_ctxs[0] = dbgfs_new_ctx();
if (!dbgfs_ctxs[0]) {
kfree(dbgfs_ctxs);
goto out;
mm/damon: implement a debugfs-based user space interface DAMON is designed to be used by kernel space code such as the memory management subsystems, and therefore it provides only kernel space API. That said, letting the user space control DAMON could provide some benefits to them. For example, it will allow user space to analyze their specific workloads and make their own special optimizations. For such cases, this commit implements a simple DAMON application kernel module, namely 'damon-dbgfs', which merely wraps the DAMON api and exports those to the user space via the debugfs. 'damon-dbgfs' exports three files, ``attrs``, ``target_ids``, and ``monitor_on`` under its debugfs directory, ``<debugfs>/damon/``. Attributes ---------- Users can read and write the ``sampling interval``, ``aggregation interval``, ``regions update interval``, and min/max number of monitoring target regions by reading from and writing to the ``attrs`` file. For example, below commands set those values to 5 ms, 100 ms, 1,000 ms, 10, 1000 and check it again:: # cd <debugfs>/damon # echo 5000 100000 1000000 10 1000 > attrs # cat attrs 5000 100000 1000000 10 1000 Target IDs ---------- Some types of address spaces supports multiple monitoring target. For example, the virtual memory address spaces monitoring can have multiple processes as the monitoring targets. Users can set the targets by writing relevant id values of the targets to, and get the ids of the current targets by reading from the ``target_ids`` file. In case of the virtual address spaces monitoring, the values should be pids of the monitoring target processes. For example, below commands set processes having pids 42 and 4242 as the monitoring targets and check it again:: # cd <debugfs>/damon # echo 42 4242 > target_ids # cat target_ids 42 4242 Note that setting the target ids doesn't start the monitoring. Turning On/Off -------------- Setting the files as described above doesn't incur effect unless you explicitly start the monitoring. You can start, stop, and check the current status of the monitoring by writing to and reading from the ``monitor_on`` file. Writing ``on`` to the file starts the monitoring of the targets with the attributes. Writing ``off`` to the file stops those. DAMON also stops if every targets are invalidated (in case of the virtual memory monitoring, target processes are invalidated when terminated). Below example commands turn on, off, and check the status of DAMON:: # cd <debugfs>/damon # echo on > monitor_on # echo off > monitor_on # cat monitor_on off Please note that you cannot write to the above-mentioned debugfs files while the monitoring is turned on. If you write to the files while DAMON is running, an error code such as ``-EBUSY`` will be returned. [akpm@linux-foundation.org: remove unneeded "alloc failed" printks] [akpm@linux-foundation.org: replace macro with static inline] Link: https://lkml.kernel.org/r/20210716081449.22187-8-sj38.park@gmail.com Signed-off-by: SeongJae Park <sjpark@amazon.de> Reviewed-by: Leonard Foerster <foersleo@amazon.de> Reviewed-by: Fernand Sieber <sieberf@amazon.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Amit Shah <amit@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Brendan Higgins <brendanhiggins@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: David Woodhouse <dwmw@amazon.com> Cc: Fan Du <fan.du@intel.com> Cc: Greg Kroah-Hartman <greg@kroah.com> Cc: Greg Thelen <gthelen@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joe Perches <joe@perches.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Marco Elver <elver@google.com> Cc: Markus Boehme <markubo@amazon.de> Cc: Maximilian Heyne <mheyne@amazon.de> Cc: Mel Gorman <mgorman@suse.de> Cc: Minchan Kim <minchan@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@surriel.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-08 02:56:53 +00:00
}
dbgfs_nr_ctxs = 1;
rc = __damon_dbgfs_init();
if (rc) {
kfree(dbgfs_ctxs[0]);
kfree(dbgfs_ctxs);
pr_err("%s: dbgfs init failed\n", __func__);
}
out:
mutex_unlock(&damon_dbgfs_lock);
mm/damon: implement a debugfs-based user space interface DAMON is designed to be used by kernel space code such as the memory management subsystems, and therefore it provides only kernel space API. That said, letting the user space control DAMON could provide some benefits to them. For example, it will allow user space to analyze their specific workloads and make their own special optimizations. For such cases, this commit implements a simple DAMON application kernel module, namely 'damon-dbgfs', which merely wraps the DAMON api and exports those to the user space via the debugfs. 'damon-dbgfs' exports three files, ``attrs``, ``target_ids``, and ``monitor_on`` under its debugfs directory, ``<debugfs>/damon/``. Attributes ---------- Users can read and write the ``sampling interval``, ``aggregation interval``, ``regions update interval``, and min/max number of monitoring target regions by reading from and writing to the ``attrs`` file. For example, below commands set those values to 5 ms, 100 ms, 1,000 ms, 10, 1000 and check it again:: # cd <debugfs>/damon # echo 5000 100000 1000000 10 1000 > attrs # cat attrs 5000 100000 1000000 10 1000 Target IDs ---------- Some types of address spaces supports multiple monitoring target. For example, the virtual memory address spaces monitoring can have multiple processes as the monitoring targets. Users can set the targets by writing relevant id values of the targets to, and get the ids of the current targets by reading from the ``target_ids`` file. In case of the virtual address spaces monitoring, the values should be pids of the monitoring target processes. For example, below commands set processes having pids 42 and 4242 as the monitoring targets and check it again:: # cd <debugfs>/damon # echo 42 4242 > target_ids # cat target_ids 42 4242 Note that setting the target ids doesn't start the monitoring. Turning On/Off -------------- Setting the files as described above doesn't incur effect unless you explicitly start the monitoring. You can start, stop, and check the current status of the monitoring by writing to and reading from the ``monitor_on`` file. Writing ``on`` to the file starts the monitoring of the targets with the attributes. Writing ``off`` to the file stops those. DAMON also stops if every targets are invalidated (in case of the virtual memory monitoring, target processes are invalidated when terminated). Below example commands turn on, off, and check the status of DAMON:: # cd <debugfs>/damon # echo on > monitor_on # echo off > monitor_on # cat monitor_on off Please note that you cannot write to the above-mentioned debugfs files while the monitoring is turned on. If you write to the files while DAMON is running, an error code such as ``-EBUSY`` will be returned. [akpm@linux-foundation.org: remove unneeded "alloc failed" printks] [akpm@linux-foundation.org: replace macro with static inline] Link: https://lkml.kernel.org/r/20210716081449.22187-8-sj38.park@gmail.com Signed-off-by: SeongJae Park <sjpark@amazon.de> Reviewed-by: Leonard Foerster <foersleo@amazon.de> Reviewed-by: Fernand Sieber <sieberf@amazon.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Amit Shah <amit@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Brendan Higgins <brendanhiggins@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: David Woodhouse <dwmw@amazon.com> Cc: Fan Du <fan.du@intel.com> Cc: Greg Kroah-Hartman <greg@kroah.com> Cc: Greg Thelen <gthelen@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joe Perches <joe@perches.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Marco Elver <elver@google.com> Cc: Markus Boehme <markubo@amazon.de> Cc: Maximilian Heyne <mheyne@amazon.de> Cc: Mel Gorman <mgorman@suse.de> Cc: Minchan Kim <minchan@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@surriel.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-08 02:56:53 +00:00
return rc;
}
module_init(damon_dbgfs_init);
mm/damon: add kunit tests This commit adds kunit based unit tests for the core and the virtual address spaces monitoring primitives of DAMON. Link: https://lkml.kernel.org/r/20210716081449.22187-12-sj38.park@gmail.com Signed-off-by: SeongJae Park <sjpark@amazon.de> Reviewed-by: Brendan Higgins <brendanhiggins@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Amit Shah <amit@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: David Hildenbrand <david@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: David Woodhouse <dwmw@amazon.com> Cc: Fan Du <fan.du@intel.com> Cc: Fernand Sieber <sieberf@amazon.com> Cc: Greg Kroah-Hartman <greg@kroah.com> Cc: Greg Thelen <gthelen@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Joe Perches <joe@perches.com> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Leonard Foerster <foersleo@amazon.de> Cc: Marco Elver <elver@google.com> Cc: Markus Boehme <markubo@amazon.de> Cc: Maximilian Heyne <mheyne@amazon.de> Cc: Mel Gorman <mgorman@suse.de> Cc: Minchan Kim <minchan@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@surriel.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-08 02:57:09 +00:00
#include "dbgfs-test.h"