linux/fs/super.c

2186 lines
56 KiB
C
Raw Normal View History

License cleanup: add SPDX GPL-2.0 license identifier to files with no license Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 14:07:57 +00:00
// SPDX-License-Identifier: GPL-2.0
/*
* linux/fs/super.c
*
* Copyright (C) 1991, 1992 Linus Torvalds
*
* super.c contains code to handle: - mount structures
* - super-block tables
* - filesystem drivers list
* - mount system call
* - umount system call
* - ustat system call
*
* GK 2/5/95 - Changed to support mounting the root fs via NFS
*
* Added kerneld support: Jacques Gelinas and Bjorn Ekwall
* Added change_root: Werner Almesberger & Hans Lermen, Feb '96
* Added options to /proc/mounts:
* Torbjörn Lindh (torbjorn.lindh@gopta.se), April 14, 1996.
* Added devfs support: Richard Gooch <rgooch@atnf.csiro.au>, 13-JAN-1998
* Heavily rewritten for 'one fs - one tree' dcache architecture. AV, Mar 2000
*/
#include <linux/export.h>
#include <linux/slab.h>
#include <linux/blkdev.h>
#include <linux/mount.h>
#include <linux/security.h>
#include <linux/writeback.h> /* for the emergency remount stuff */
#include <linux/idr.h>
#include <linux/mutex.h>
#include <linux/backing-dev.h>
#include <linux/rculist_bl.h>
fscrypt: add FS_IOC_ADD_ENCRYPTION_KEY ioctl Add a new fscrypt ioctl, FS_IOC_ADD_ENCRYPTION_KEY. This ioctl adds an encryption key to the filesystem's fscrypt keyring ->s_master_keys, making any files encrypted with that key appear "unlocked". Why we need this ~~~~~~~~~~~~~~~~ The main problem is that the "locked/unlocked" (ciphertext/plaintext) status of encrypted files is global, but the fscrypt keys are not. fscrypt only looks for keys in the keyring(s) the process accessing the filesystem is subscribed to: the thread keyring, process keyring, and session keyring, where the session keyring may contain the user keyring. Therefore, userspace has to put fscrypt keys in the keyrings for individual users or sessions. But this means that when a process with a different keyring tries to access encrypted files, whether they appear "unlocked" or not is nondeterministic. This is because it depends on whether the files are currently present in the inode cache. Fixing this by consistently providing each process its own view of the filesystem depending on whether it has the key or not isn't feasible due to how the VFS caches work. Furthermore, while sometimes users expect this behavior, it is misguided for two reasons. First, it would be an OS-level access control mechanism largely redundant with existing access control mechanisms such as UNIX file permissions, ACLs, LSMs, etc. Encryption is actually for protecting the data at rest. Second, almost all users of fscrypt actually do need the keys to be global. The largest users of fscrypt, Android and Chromium OS, achieve this by having PID 1 create a "session keyring" that is inherited by every process. This works, but it isn't scalable because it prevents session keyrings from being used for any other purpose. On general-purpose Linux distros, the 'fscrypt' userspace tool [1] can't similarly abuse the session keyring, so to make 'sudo' work on all systems it has to link all the user keyrings into root's user keyring [2]. This is ugly and raises security concerns. Moreover it can't make the keys available to system services, such as sshd trying to access the user's '~/.ssh' directory (see [3], [4]) or NetworkManager trying to read certificates from the user's home directory (see [5]); or to Docker containers (see [6], [7]). By having an API to add a key to the *filesystem* we'll be able to fix the above bugs, remove userspace workarounds, and clearly express the intended semantics: the locked/unlocked status of an encrypted directory is global, and encryption is orthogonal to OS-level access control. Why not use the add_key() syscall ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ We use an ioctl for this API rather than the existing add_key() system call because the ioctl gives us the flexibility needed to implement fscrypt-specific semantics that will be introduced in later patches: - Supporting key removal with the semantics such that the secret is removed immediately and any unused inodes using the key are evicted; also, the eviction of any in-use inodes can be retried. - Calculating a key-dependent cryptographic identifier and returning it to userspace. - Allowing keys to be added and removed by non-root users, but only keys for v2 encryption policies; and to prevent denial-of-service attacks, users can only remove keys they themselves have added, and a key is only really removed after all users who added it have removed it. Trying to shoehorn these semantics into the keyrings syscalls would be very difficult, whereas the ioctls make things much easier. However, to reuse code the implementation still uses the keyrings service internally. Thus we get lockless RCU-mode key lookups without having to re-implement it, and the keys automatically show up in /proc/keys for debugging purposes. References: [1] https://github.com/google/fscrypt [2] https://goo.gl/55cCrI#heading=h.vf09isp98isb [3] https://github.com/google/fscrypt/issues/111#issuecomment-444347939 [4] https://github.com/google/fscrypt/issues/116 [5] https://bugs.launchpad.net/ubuntu/+source/fscrypt/+bug/1770715 [6] https://github.com/google/fscrypt/issues/128 [7] https://askubuntu.com/questions/1130306/cannot-run-docker-on-an-encrypted-filesystem Reviewed-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Eric Biggers <ebiggers@google.com>
2019-08-05 02:35:46 +00:00
#include <linux/fscrypt.h>
#include <linux/fsnotify.h>
fs: Improve filesystem freezing handling vfs_check_frozen() tests are racy since the filesystem can be frozen just after the test is performed. Thus in write paths we can end up marking some pages or inodes dirty even though the file system is already frozen. This creates problems with flusher thread hanging on frozen filesystem. Another problem is that exclusion between ->page_mkwrite() and filesystem freezing has been handled by setting page dirty and then verifying s_frozen. This guaranteed that either the freezing code sees the faulted page, writes it, and writeprotects it again or we see s_frozen set and bail out of page fault. This works to protect from page being marked writeable while filesystem freezing is running but has an unpleasant artefact of leaving dirty (although unmodified and writeprotected) pages on frozen filesystem resulting in similar problems with flusher thread as the first problem. This patch aims at providing exclusion between write paths and filesystem freezing. We implement a writer-freeze read-write semaphore in the superblock. Actually, there are three such semaphores because of lock ranking reasons - one for page fault handlers (->page_mkwrite), one for all other writers, and one of internal filesystem purposes (used e.g. to track running transactions). Write paths which should block freezing (e.g. directory operations, ->aio_write(), ->page_mkwrite) hold reader side of the semaphore. Code freezing the filesystem takes the writer side. Only that we don't really want to bounce cachelines of the semaphores between CPUs for each write happening. So we implement the reader side of the semaphore as a per-cpu counter and the writer side is implemented using s_writers.frozen superblock field. [AV: microoptimize sb_start_write(); we want it fast in normal case] BugLink: https://bugs.launchpad.net/bugs/897421 Tested-by: Kamal Mostafa <kamal@canonical.com> Tested-by: Peter M. Petrakis <peter.petrakis@canonical.com> Tested-by: Dann Frazier <dann.frazier@canonical.com> Tested-by: Massimo Morana <massimo.morana@canonical.com> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-06-12 14:20:34 +00:00
#include <linux/lockdep.h>
fs: Add user namespace member to struct super_block Start marking filesystems with a user namespace owner, s_user_ns. In this change this is only used for permission checks of who may mount a filesystem. Ultimately s_user_ns will be used for translating ids and checking capabilities for filesystems mounted from user namespaces. The default policy for setting s_user_ns is implemented in sget(), which arranges for s_user_ns to be set to current_user_ns() and to ensure that the mounter of the filesystem has CAP_SYS_ADMIN in that user_ns. The guts of sget are split out into another function sget_userns(). The function sget_userns calls alloc_super with the specified user namespace or it verifies the existing superblock that was found has the expected user namespace, and fails with EBUSY when it is not. This failing prevents users with the wrong privileges mounting a filesystem. The reason for the split of sget_userns from sget is that in some cases such as mount_ns and kernfs_mount_ns a different policy for permission checking of mounts and setting s_user_ns is necessary, and the existence of sget_userns() allows those policies to be implemented. The helper mount_ns is expected to be used for filesystems such as proc and mqueuefs which present per namespace information. The function mount_ns is modified to call sget_userns instead of sget to ensure the user namespace owner of the namespace whose information is presented by the filesystem is used on the superblock. For sysfs and cgroup the appropriate permission checks are already in place, and kernfs_mount_ns is modified to call sget_userns so that the init_user_ns is the only user namespace used. For the cgroup filesystem cgroup namespace mounts are bind mounts of a subset of the full cgroup filesystem and as such s_user_ns must be the same for all of them as there is only a single superblock. Mounts of sysfs that vary based on the network namespace could in principle change s_user_ns but it keeps the analysis and implementation of kernfs simpler if that is not supported, and at present there appear to be no benefits from supporting a different s_user_ns on any sysfs mount. Getting the details of setting s_user_ns correct has been a long process. Thanks to Pavel Tikhorirorv who spotted a leak in sget_userns. Thanks to Seth Forshee who has kept the work alive. Thanks-to: Seth Forshee <seth.forshee@canonical.com> Thanks-to: Pavel Tikhomirov <ptikhomirov@virtuozzo.com> Acked-by: Seth Forshee <seth.forshee@canonical.com> Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2016-05-24 14:29:01 +00:00
#include <linux/user_namespace.h>
#include <linux/fs_context.h>
#include <uapi/linux/mount.h>
#include "internal.h"
static int thaw_super_locked(struct super_block *sb, enum freeze_holder who);
static LIST_HEAD(super_blocks);
static DEFINE_SPINLOCK(sb_lock);
fs: Improve filesystem freezing handling vfs_check_frozen() tests are racy since the filesystem can be frozen just after the test is performed. Thus in write paths we can end up marking some pages or inodes dirty even though the file system is already frozen. This creates problems with flusher thread hanging on frozen filesystem. Another problem is that exclusion between ->page_mkwrite() and filesystem freezing has been handled by setting page dirty and then verifying s_frozen. This guaranteed that either the freezing code sees the faulted page, writes it, and writeprotects it again or we see s_frozen set and bail out of page fault. This works to protect from page being marked writeable while filesystem freezing is running but has an unpleasant artefact of leaving dirty (although unmodified and writeprotected) pages on frozen filesystem resulting in similar problems with flusher thread as the first problem. This patch aims at providing exclusion between write paths and filesystem freezing. We implement a writer-freeze read-write semaphore in the superblock. Actually, there are three such semaphores because of lock ranking reasons - one for page fault handlers (->page_mkwrite), one for all other writers, and one of internal filesystem purposes (used e.g. to track running transactions). Write paths which should block freezing (e.g. directory operations, ->aio_write(), ->page_mkwrite) hold reader side of the semaphore. Code freezing the filesystem takes the writer side. Only that we don't really want to bounce cachelines of the semaphores between CPUs for each write happening. So we implement the reader side of the semaphore as a per-cpu counter and the writer side is implemented using s_writers.frozen superblock field. [AV: microoptimize sb_start_write(); we want it fast in normal case] BugLink: https://bugs.launchpad.net/bugs/897421 Tested-by: Kamal Mostafa <kamal@canonical.com> Tested-by: Peter M. Petrakis <peter.petrakis@canonical.com> Tested-by: Dann Frazier <dann.frazier@canonical.com> Tested-by: Massimo Morana <massimo.morana@canonical.com> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-06-12 14:20:34 +00:00
static char *sb_writers_name[SB_FREEZE_LEVELS] = {
"sb_writers",
"sb_pagefaults",
"sb_internal",
};
super: wait for nascent superblocks Recent patches experiment with making it possible to allocate a new superblock before opening the relevant block device. Naturally this has intricate side-effects that we get to learn about while developing this. Superblock allocators such as sget{_fc}() return with s_umount of the new superblock held and lock ordering currently requires that block level locks such as bdev_lock and open_mutex rank above s_umount. Before aca740cecbe5 ("fs: open block device after superblock creation") ordering was guaranteed to be correct as block devices were opened prior to superblock allocation and thus s_umount wasn't held. But now s_umount must be dropped before opening block devices to avoid locking violations. This has consequences. The main one being that iterators over @super_blocks and @fs_supers that grab a temporary reference to the superblock can now also grab s_umount before the caller has managed to open block devices and called fill_super(). So whereas before such iterators or concurrent mounts would have simply slept on s_umount until SB_BORN was set or the superblock was discard due to initalization failure they can now needlessly spin through sget{_fc}(). If the caller is sleeping on bdev_lock or open_mutex one caller waiting on SB_BORN will always spin somewhere and potentially this can go on for quite a while. It should be possible to drop s_umount while allowing iterators to wait on a nascent superblock to either be born or discarded. This patch implements a wait_var_event() mechanism allowing iterators to sleep until they are woken when the superblock is born or discarded. This also allows us to avoid relooping through @fs_supers and @super_blocks if a superblock isn't yet born or dying. Link: aca740cecbe5 ("fs: open block device after superblock creation") Reviewed-by: Jan Kara <jack@suse.cz> Message-Id: <20230818-vfs-super-fixes-v3-v3-3-9f0b1876e46b@kernel.org> Signed-off-by: Christian Brauner <brauner@kernel.org>
2023-08-18 14:00:50 +00:00
static inline void __super_lock(struct super_block *sb, bool excl)
{
if (excl)
down_write(&sb->s_umount);
else
down_read(&sb->s_umount);
}
static inline void super_unlock(struct super_block *sb, bool excl)
{
if (excl)
up_write(&sb->s_umount);
else
up_read(&sb->s_umount);
}
super: wait for nascent superblocks Recent patches experiment with making it possible to allocate a new superblock before opening the relevant block device. Naturally this has intricate side-effects that we get to learn about while developing this. Superblock allocators such as sget{_fc}() return with s_umount of the new superblock held and lock ordering currently requires that block level locks such as bdev_lock and open_mutex rank above s_umount. Before aca740cecbe5 ("fs: open block device after superblock creation") ordering was guaranteed to be correct as block devices were opened prior to superblock allocation and thus s_umount wasn't held. But now s_umount must be dropped before opening block devices to avoid locking violations. This has consequences. The main one being that iterators over @super_blocks and @fs_supers that grab a temporary reference to the superblock can now also grab s_umount before the caller has managed to open block devices and called fill_super(). So whereas before such iterators or concurrent mounts would have simply slept on s_umount until SB_BORN was set or the superblock was discard due to initalization failure they can now needlessly spin through sget{_fc}(). If the caller is sleeping on bdev_lock or open_mutex one caller waiting on SB_BORN will always spin somewhere and potentially this can go on for quite a while. It should be possible to drop s_umount while allowing iterators to wait on a nascent superblock to either be born or discarded. This patch implements a wait_var_event() mechanism allowing iterators to sleep until they are woken when the superblock is born or discarded. This also allows us to avoid relooping through @fs_supers and @super_blocks if a superblock isn't yet born or dying. Link: aca740cecbe5 ("fs: open block device after superblock creation") Reviewed-by: Jan Kara <jack@suse.cz> Message-Id: <20230818-vfs-super-fixes-v3-v3-3-9f0b1876e46b@kernel.org> Signed-off-by: Christian Brauner <brauner@kernel.org>
2023-08-18 14:00:50 +00:00
static inline void __super_lock_excl(struct super_block *sb)
{
super: wait for nascent superblocks Recent patches experiment with making it possible to allocate a new superblock before opening the relevant block device. Naturally this has intricate side-effects that we get to learn about while developing this. Superblock allocators such as sget{_fc}() return with s_umount of the new superblock held and lock ordering currently requires that block level locks such as bdev_lock and open_mutex rank above s_umount. Before aca740cecbe5 ("fs: open block device after superblock creation") ordering was guaranteed to be correct as block devices were opened prior to superblock allocation and thus s_umount wasn't held. But now s_umount must be dropped before opening block devices to avoid locking violations. This has consequences. The main one being that iterators over @super_blocks and @fs_supers that grab a temporary reference to the superblock can now also grab s_umount before the caller has managed to open block devices and called fill_super(). So whereas before such iterators or concurrent mounts would have simply slept on s_umount until SB_BORN was set or the superblock was discard due to initalization failure they can now needlessly spin through sget{_fc}(). If the caller is sleeping on bdev_lock or open_mutex one caller waiting on SB_BORN will always spin somewhere and potentially this can go on for quite a while. It should be possible to drop s_umount while allowing iterators to wait on a nascent superblock to either be born or discarded. This patch implements a wait_var_event() mechanism allowing iterators to sleep until they are woken when the superblock is born or discarded. This also allows us to avoid relooping through @fs_supers and @super_blocks if a superblock isn't yet born or dying. Link: aca740cecbe5 ("fs: open block device after superblock creation") Reviewed-by: Jan Kara <jack@suse.cz> Message-Id: <20230818-vfs-super-fixes-v3-v3-3-9f0b1876e46b@kernel.org> Signed-off-by: Christian Brauner <brauner@kernel.org>
2023-08-18 14:00:50 +00:00
__super_lock(sb, true);
}
static inline void super_unlock_excl(struct super_block *sb)
{
super_unlock(sb, true);
}
static inline void super_unlock_shared(struct super_block *sb)
{
super_unlock(sb, false);
}
super: wait for nascent superblocks Recent patches experiment with making it possible to allocate a new superblock before opening the relevant block device. Naturally this has intricate side-effects that we get to learn about while developing this. Superblock allocators such as sget{_fc}() return with s_umount of the new superblock held and lock ordering currently requires that block level locks such as bdev_lock and open_mutex rank above s_umount. Before aca740cecbe5 ("fs: open block device after superblock creation") ordering was guaranteed to be correct as block devices were opened prior to superblock allocation and thus s_umount wasn't held. But now s_umount must be dropped before opening block devices to avoid locking violations. This has consequences. The main one being that iterators over @super_blocks and @fs_supers that grab a temporary reference to the superblock can now also grab s_umount before the caller has managed to open block devices and called fill_super(). So whereas before such iterators or concurrent mounts would have simply slept on s_umount until SB_BORN was set or the superblock was discard due to initalization failure they can now needlessly spin through sget{_fc}(). If the caller is sleeping on bdev_lock or open_mutex one caller waiting on SB_BORN will always spin somewhere and potentially this can go on for quite a while. It should be possible to drop s_umount while allowing iterators to wait on a nascent superblock to either be born or discarded. This patch implements a wait_var_event() mechanism allowing iterators to sleep until they are woken when the superblock is born or discarded. This also allows us to avoid relooping through @fs_supers and @super_blocks if a superblock isn't yet born or dying. Link: aca740cecbe5 ("fs: open block device after superblock creation") Reviewed-by: Jan Kara <jack@suse.cz> Message-Id: <20230818-vfs-super-fixes-v3-v3-3-9f0b1876e46b@kernel.org> Signed-off-by: Christian Brauner <brauner@kernel.org>
2023-08-18 14:00:50 +00:00
static inline bool wait_born(struct super_block *sb)
{
unsigned int flags;
/*
* Pairs with smp_store_release() in super_wake() and ensures
* that we see SB_BORN or SB_DYING after we're woken.
*/
flags = smp_load_acquire(&sb->s_flags);
return flags & (SB_BORN | SB_DYING);
}
/**
* super_lock - wait for superblock to become ready and lock it
* @sb: superblock to wait for
* @excl: whether exclusive access is required
*
* If the superblock has neither passed through vfs_get_tree() or
* generic_shutdown_super() yet wait for it to happen. Either superblock
* creation will succeed and SB_BORN is set by vfs_get_tree() or we're
* woken and we'll see SB_DYING.
*
* The caller must have acquired a temporary reference on @sb->s_count.
*
* Return: The function returns true if SB_BORN was set and with
* s_umount held. The function returns false if SB_DYING was
* set and without s_umount held.
super: wait for nascent superblocks Recent patches experiment with making it possible to allocate a new superblock before opening the relevant block device. Naturally this has intricate side-effects that we get to learn about while developing this. Superblock allocators such as sget{_fc}() return with s_umount of the new superblock held and lock ordering currently requires that block level locks such as bdev_lock and open_mutex rank above s_umount. Before aca740cecbe5 ("fs: open block device after superblock creation") ordering was guaranteed to be correct as block devices were opened prior to superblock allocation and thus s_umount wasn't held. But now s_umount must be dropped before opening block devices to avoid locking violations. This has consequences. The main one being that iterators over @super_blocks and @fs_supers that grab a temporary reference to the superblock can now also grab s_umount before the caller has managed to open block devices and called fill_super(). So whereas before such iterators or concurrent mounts would have simply slept on s_umount until SB_BORN was set or the superblock was discard due to initalization failure they can now needlessly spin through sget{_fc}(). If the caller is sleeping on bdev_lock or open_mutex one caller waiting on SB_BORN will always spin somewhere and potentially this can go on for quite a while. It should be possible to drop s_umount while allowing iterators to wait on a nascent superblock to either be born or discarded. This patch implements a wait_var_event() mechanism allowing iterators to sleep until they are woken when the superblock is born or discarded. This also allows us to avoid relooping through @fs_supers and @super_blocks if a superblock isn't yet born or dying. Link: aca740cecbe5 ("fs: open block device after superblock creation") Reviewed-by: Jan Kara <jack@suse.cz> Message-Id: <20230818-vfs-super-fixes-v3-v3-3-9f0b1876e46b@kernel.org> Signed-off-by: Christian Brauner <brauner@kernel.org>
2023-08-18 14:00:50 +00:00
*/
static __must_check bool super_lock(struct super_block *sb, bool excl)
{
lockdep_assert_not_held(&sb->s_umount);
relock:
__super_lock(sb, excl);
/*
* Has gone through generic_shutdown_super() in the meantime.
* @sb->s_root is NULL and @sb->s_active is 0. No one needs to
* grab a reference to this. Tell them so.
*/
if (sb->s_flags & SB_DYING) {
super_unlock(sb, excl);
super: wait for nascent superblocks Recent patches experiment with making it possible to allocate a new superblock before opening the relevant block device. Naturally this has intricate side-effects that we get to learn about while developing this. Superblock allocators such as sget{_fc}() return with s_umount of the new superblock held and lock ordering currently requires that block level locks such as bdev_lock and open_mutex rank above s_umount. Before aca740cecbe5 ("fs: open block device after superblock creation") ordering was guaranteed to be correct as block devices were opened prior to superblock allocation and thus s_umount wasn't held. But now s_umount must be dropped before opening block devices to avoid locking violations. This has consequences. The main one being that iterators over @super_blocks and @fs_supers that grab a temporary reference to the superblock can now also grab s_umount before the caller has managed to open block devices and called fill_super(). So whereas before such iterators or concurrent mounts would have simply slept on s_umount until SB_BORN was set or the superblock was discard due to initalization failure they can now needlessly spin through sget{_fc}(). If the caller is sleeping on bdev_lock or open_mutex one caller waiting on SB_BORN will always spin somewhere and potentially this can go on for quite a while. It should be possible to drop s_umount while allowing iterators to wait on a nascent superblock to either be born or discarded. This patch implements a wait_var_event() mechanism allowing iterators to sleep until they are woken when the superblock is born or discarded. This also allows us to avoid relooping through @fs_supers and @super_blocks if a superblock isn't yet born or dying. Link: aca740cecbe5 ("fs: open block device after superblock creation") Reviewed-by: Jan Kara <jack@suse.cz> Message-Id: <20230818-vfs-super-fixes-v3-v3-3-9f0b1876e46b@kernel.org> Signed-off-by: Christian Brauner <brauner@kernel.org>
2023-08-18 14:00:50 +00:00
return false;
}
super: wait for nascent superblocks Recent patches experiment with making it possible to allocate a new superblock before opening the relevant block device. Naturally this has intricate side-effects that we get to learn about while developing this. Superblock allocators such as sget{_fc}() return with s_umount of the new superblock held and lock ordering currently requires that block level locks such as bdev_lock and open_mutex rank above s_umount. Before aca740cecbe5 ("fs: open block device after superblock creation") ordering was guaranteed to be correct as block devices were opened prior to superblock allocation and thus s_umount wasn't held. But now s_umount must be dropped before opening block devices to avoid locking violations. This has consequences. The main one being that iterators over @super_blocks and @fs_supers that grab a temporary reference to the superblock can now also grab s_umount before the caller has managed to open block devices and called fill_super(). So whereas before such iterators or concurrent mounts would have simply slept on s_umount until SB_BORN was set or the superblock was discard due to initalization failure they can now needlessly spin through sget{_fc}(). If the caller is sleeping on bdev_lock or open_mutex one caller waiting on SB_BORN will always spin somewhere and potentially this can go on for quite a while. It should be possible to drop s_umount while allowing iterators to wait on a nascent superblock to either be born or discarded. This patch implements a wait_var_event() mechanism allowing iterators to sleep until they are woken when the superblock is born or discarded. This also allows us to avoid relooping through @fs_supers and @super_blocks if a superblock isn't yet born or dying. Link: aca740cecbe5 ("fs: open block device after superblock creation") Reviewed-by: Jan Kara <jack@suse.cz> Message-Id: <20230818-vfs-super-fixes-v3-v3-3-9f0b1876e46b@kernel.org> Signed-off-by: Christian Brauner <brauner@kernel.org>
2023-08-18 14:00:50 +00:00
/* Has called ->get_tree() successfully. */
if (sb->s_flags & SB_BORN)
return true;
super_unlock(sb, excl);
/* wait until the superblock is ready or dying */
wait_var_event(&sb->s_flags, wait_born(sb));
/*
* Neither SB_BORN nor SB_DYING are ever unset so we never loop.
* Just reacquire @sb->s_umount for the caller.
*/
goto relock;
}
/* wait and try to acquire read-side of @sb->s_umount */
super: wait for nascent superblocks Recent patches experiment with making it possible to allocate a new superblock before opening the relevant block device. Naturally this has intricate side-effects that we get to learn about while developing this. Superblock allocators such as sget{_fc}() return with s_umount of the new superblock held and lock ordering currently requires that block level locks such as bdev_lock and open_mutex rank above s_umount. Before aca740cecbe5 ("fs: open block device after superblock creation") ordering was guaranteed to be correct as block devices were opened prior to superblock allocation and thus s_umount wasn't held. But now s_umount must be dropped before opening block devices to avoid locking violations. This has consequences. The main one being that iterators over @super_blocks and @fs_supers that grab a temporary reference to the superblock can now also grab s_umount before the caller has managed to open block devices and called fill_super(). So whereas before such iterators or concurrent mounts would have simply slept on s_umount until SB_BORN was set or the superblock was discard due to initalization failure they can now needlessly spin through sget{_fc}(). If the caller is sleeping on bdev_lock or open_mutex one caller waiting on SB_BORN will always spin somewhere and potentially this can go on for quite a while. It should be possible to drop s_umount while allowing iterators to wait on a nascent superblock to either be born or discarded. This patch implements a wait_var_event() mechanism allowing iterators to sleep until they are woken when the superblock is born or discarded. This also allows us to avoid relooping through @fs_supers and @super_blocks if a superblock isn't yet born or dying. Link: aca740cecbe5 ("fs: open block device after superblock creation") Reviewed-by: Jan Kara <jack@suse.cz> Message-Id: <20230818-vfs-super-fixes-v3-v3-3-9f0b1876e46b@kernel.org> Signed-off-by: Christian Brauner <brauner@kernel.org>
2023-08-18 14:00:50 +00:00
static inline bool super_lock_shared(struct super_block *sb)
{
return super_lock(sb, false);
}
/* wait and try to acquire write-side of @sb->s_umount */
super: wait for nascent superblocks Recent patches experiment with making it possible to allocate a new superblock before opening the relevant block device. Naturally this has intricate side-effects that we get to learn about while developing this. Superblock allocators such as sget{_fc}() return with s_umount of the new superblock held and lock ordering currently requires that block level locks such as bdev_lock and open_mutex rank above s_umount. Before aca740cecbe5 ("fs: open block device after superblock creation") ordering was guaranteed to be correct as block devices were opened prior to superblock allocation and thus s_umount wasn't held. But now s_umount must be dropped before opening block devices to avoid locking violations. This has consequences. The main one being that iterators over @super_blocks and @fs_supers that grab a temporary reference to the superblock can now also grab s_umount before the caller has managed to open block devices and called fill_super(). So whereas before such iterators or concurrent mounts would have simply slept on s_umount until SB_BORN was set or the superblock was discard due to initalization failure they can now needlessly spin through sget{_fc}(). If the caller is sleeping on bdev_lock or open_mutex one caller waiting on SB_BORN will always spin somewhere and potentially this can go on for quite a while. It should be possible to drop s_umount while allowing iterators to wait on a nascent superblock to either be born or discarded. This patch implements a wait_var_event() mechanism allowing iterators to sleep until they are woken when the superblock is born or discarded. This also allows us to avoid relooping through @fs_supers and @super_blocks if a superblock isn't yet born or dying. Link: aca740cecbe5 ("fs: open block device after superblock creation") Reviewed-by: Jan Kara <jack@suse.cz> Message-Id: <20230818-vfs-super-fixes-v3-v3-3-9f0b1876e46b@kernel.org> Signed-off-by: Christian Brauner <brauner@kernel.org>
2023-08-18 14:00:50 +00:00
static inline bool super_lock_excl(struct super_block *sb)
{
return super_lock(sb, true);
}
/* wake waiters */
#define SUPER_WAKE_FLAGS (SB_BORN | SB_DYING | SB_DEAD)
super: wait for nascent superblocks Recent patches experiment with making it possible to allocate a new superblock before opening the relevant block device. Naturally this has intricate side-effects that we get to learn about while developing this. Superblock allocators such as sget{_fc}() return with s_umount of the new superblock held and lock ordering currently requires that block level locks such as bdev_lock and open_mutex rank above s_umount. Before aca740cecbe5 ("fs: open block device after superblock creation") ordering was guaranteed to be correct as block devices were opened prior to superblock allocation and thus s_umount wasn't held. But now s_umount must be dropped before opening block devices to avoid locking violations. This has consequences. The main one being that iterators over @super_blocks and @fs_supers that grab a temporary reference to the superblock can now also grab s_umount before the caller has managed to open block devices and called fill_super(). So whereas before such iterators or concurrent mounts would have simply slept on s_umount until SB_BORN was set or the superblock was discard due to initalization failure they can now needlessly spin through sget{_fc}(). If the caller is sleeping on bdev_lock or open_mutex one caller waiting on SB_BORN will always spin somewhere and potentially this can go on for quite a while. It should be possible to drop s_umount while allowing iterators to wait on a nascent superblock to either be born or discarded. This patch implements a wait_var_event() mechanism allowing iterators to sleep until they are woken when the superblock is born or discarded. This also allows us to avoid relooping through @fs_supers and @super_blocks if a superblock isn't yet born or dying. Link: aca740cecbe5 ("fs: open block device after superblock creation") Reviewed-by: Jan Kara <jack@suse.cz> Message-Id: <20230818-vfs-super-fixes-v3-v3-3-9f0b1876e46b@kernel.org> Signed-off-by: Christian Brauner <brauner@kernel.org>
2023-08-18 14:00:50 +00:00
static void super_wake(struct super_block *sb, unsigned int flag)
{
WARN_ON_ONCE((flag & ~SUPER_WAKE_FLAGS));
WARN_ON_ONCE(hweight32(flag & SUPER_WAKE_FLAGS) > 1);
/*
* Pairs with smp_load_acquire() in super_lock() to make sure
* all initializations in the superblock are seen by the user
* seeing SB_BORN sent.
*/
smp_store_release(&sb->s_flags, sb->s_flags | flag);
/*
* Pairs with the barrier in prepare_to_wait_event() to make sure
* ___wait_var_event() either sees SB_BORN set or
* waitqueue_active() check in wake_up_var() sees the waiter.
*/
smp_mb();
wake_up_var(&sb->s_flags);
}
/*
* One thing we have to be careful of with a per-sb shrinker is that we don't
* drop the last active reference to the superblock from within the shrinker.
* If that happens we could trigger unregistering the shrinker from within the
mm: shrinker: convert shrinker_rwsem to mutex Now there are no readers of shrinker_rwsem, so we can simply replace it with mutex lock. [akpm@linux-foundation.org: update the fix to alloc_shrinker_info()] Link: https://lkml.kernel.org/r/20230911094444.68966-46-zhengqi.arch@bytedance.com Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com> Reviewed-by: Muchun Song <songmuchun@bytedance.com> Cc: Abhinav Kumar <quic_abhinavk@quicinc.com> Cc: Alasdair Kergon <agk@redhat.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com> Cc: Andreas Dilger <adilger.kernel@dilger.ca> Cc: Andreas Gruenbacher <agruenba@redhat.com> Cc: Anna Schumaker <anna@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Bob Peterson <rpeterso@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Carlos Llamas <cmllamas@google.com> Cc: Chandan Babu R <chandan.babu@oracle.com> Cc: Chao Yu <chao@kernel.org> Cc: Chris Mason <clm@fb.com> Cc: Christian Brauner <brauner@kernel.org> Cc: Christian Koenig <christian.koenig@amd.com> Cc: Chuck Lever <cel@kernel.org> Cc: Coly Li <colyli@suse.de> Cc: Dai Ngo <Dai.Ngo@oracle.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: "Darrick J. Wong" <djwong@kernel.org> Cc: Dave Chinner <david@fromorbit.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David Airlie <airlied@gmail.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Sterba <dsterba@suse.com> Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Cc: Gao Xiang <hsiangkao@linux.alibaba.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Huang Rui <ray.huang@amd.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jaegeuk Kim <jaegeuk@kernel.org> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Jan Kara <jack@suse.cz> Cc: Jason Wang <jasowang@redhat.com> Cc: Jeff Layton <jlayton@kernel.org> Cc: Jeffle Xu <jefflexu@linux.alibaba.com> Cc: Joel Fernandes (Google) <joel@joelfernandes.org> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Josef Bacik <josef@toxicpanda.com> Cc: Juergen Gross <jgross@suse.com> Cc: Kent Overstreet <kent.overstreet@gmail.com> Cc: Kirill Tkhai <tkhai@ya.ru> Cc: Marijn Suijten <marijn.suijten@somainline.org> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Mike Snitzer <snitzer@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Nadav Amit <namit@vmware.com> Cc: Neil Brown <neilb@suse.de> Cc: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com> Cc: Olga Kornievskaia <kolga@netapp.com> Cc: Paul E. McKenney <paulmck@kernel.org> Cc: Richard Weinberger <richard@nod.at> Cc: Rob Clark <robdclark@gmail.com> Cc: Rob Herring <robh@kernel.org> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: Sean Paul <sean@poorly.run> Cc: Sergey Senozhatsky <senozhatsky@chromium.org> Cc: Song Liu <song@kernel.org> Cc: Stefano Stabellini <sstabellini@kernel.org> Cc: Steven Price <steven.price@arm.com> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com> Cc: Tom Talpey <tom@talpey.com> Cc: Trond Myklebust <trond.myklebust@hammerspace.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Cc: Yue Hu <huyue2@coolpad.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-09-11 09:44:44 +00:00
* shrinker path and that leads to deadlock on the shrinker_mutex. Hence we
* take a passive reference to the superblock to avoid this from occurring.
*/
shrinker: convert superblock shrinkers to new API Convert superblock shrinker to use the new count/scan API, and propagate the API changes through to the filesystem callouts. The filesystem callouts already use a count/scan API, so it's just changing counters to longs to match the VM API. This requires the dentry and inode shrinker callouts to be converted to the count/scan API. This is mainly a mechanical change. [glommer@openvz.org: use mult_frac for fractional proportions, build fixes] Signed-off-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Glauber Costa <glommer@openvz.org> Acked-by: Mel Gorman <mgorman@suse.de> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Cc: Arve Hjønnevåg <arve@android.com> Cc: Carlos Maiolino <cmaiolino@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Chuck Lever <chuck.lever@oracle.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: David Rientjes <rientjes@google.com> Cc: Gleb Natapov <gleb@redhat.com> Cc: Greg Thelen <gthelen@google.com> Cc: J. Bruce Fields <bfields@redhat.com> Cc: Jan Kara <jack@suse.cz> Cc: Jerome Glisse <jglisse@redhat.com> Cc: John Stultz <john.stultz@linaro.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Kent Overstreet <koverstreet@google.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Thomas Hellstrom <thellstrom@vmware.com> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-08-28 00:17:57 +00:00
static unsigned long super_cache_scan(struct shrinker *shrink,
struct shrink_control *sc)
{
struct super_block *sb;
shrinker: convert superblock shrinkers to new API Convert superblock shrinker to use the new count/scan API, and propagate the API changes through to the filesystem callouts. The filesystem callouts already use a count/scan API, so it's just changing counters to longs to match the VM API. This requires the dentry and inode shrinker callouts to be converted to the count/scan API. This is mainly a mechanical change. [glommer@openvz.org: use mult_frac for fractional proportions, build fixes] Signed-off-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Glauber Costa <glommer@openvz.org> Acked-by: Mel Gorman <mgorman@suse.de> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Cc: Arve Hjønnevåg <arve@android.com> Cc: Carlos Maiolino <cmaiolino@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Chuck Lever <chuck.lever@oracle.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: David Rientjes <rientjes@google.com> Cc: Gleb Natapov <gleb@redhat.com> Cc: Greg Thelen <gthelen@google.com> Cc: J. Bruce Fields <bfields@redhat.com> Cc: Jan Kara <jack@suse.cz> Cc: Jerome Glisse <jglisse@redhat.com> Cc: John Stultz <john.stultz@linaro.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Kent Overstreet <koverstreet@google.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Thomas Hellstrom <thellstrom@vmware.com> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-08-28 00:17:57 +00:00
long fs_objects = 0;
long total_objects;
long freed = 0;
long dentries;
long inodes;
fs: super: dynamically allocate the s_shrink In preparation for implementing lockless slab shrink, use new APIs to dynamically allocate the s_shrink, so that it can be freed asynchronously via RCU. Then it doesn't need to wait for RCU read-side critical section when releasing the struct super_block. Link: https://lkml.kernel.org/r/20230911094444.68966-39-zhengqi.arch@bytedance.com Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com> Reviewed-by: Muchun Song <songmuchun@bytedance.com> Acked-by: David Sterba <dsterba@suse.com> Cc: Chris Mason <clm@fb.com> Cc: Josef Bacik <josef@toxicpanda.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Christian Brauner <brauner@kernel.org> Cc: Abhinav Kumar <quic_abhinavk@quicinc.com> Cc: Alasdair Kergon <agk@redhat.com> Cc: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com> Cc: Andreas Dilger <adilger.kernel@dilger.ca> Cc: Andreas Gruenbacher <agruenba@redhat.com> Cc: Anna Schumaker <anna@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Bob Peterson <rpeterso@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Carlos Llamas <cmllamas@google.com> Cc: Chandan Babu R <chandan.babu@oracle.com> Cc: Chao Yu <chao@kernel.org> Cc: Christian Koenig <christian.koenig@amd.com> Cc: Chuck Lever <cel@kernel.org> Cc: Coly Li <colyli@suse.de> Cc: Dai Ngo <Dai.Ngo@oracle.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: "Darrick J. Wong" <djwong@kernel.org> Cc: Dave Chinner <david@fromorbit.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David Airlie <airlied@gmail.com> Cc: David Hildenbrand <david@redhat.com> Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Cc: Gao Xiang <hsiangkao@linux.alibaba.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Huang Rui <ray.huang@amd.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jaegeuk Kim <jaegeuk@kernel.org> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Jan Kara <jack@suse.cz> Cc: Jason Wang <jasowang@redhat.com> Cc: Jeff Layton <jlayton@kernel.org> Cc: Jeffle Xu <jefflexu@linux.alibaba.com> Cc: Joel Fernandes (Google) <joel@joelfernandes.org> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Juergen Gross <jgross@suse.com> Cc: Kent Overstreet <kent.overstreet@gmail.com> Cc: Kirill Tkhai <tkhai@ya.ru> Cc: Marijn Suijten <marijn.suijten@somainline.org> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Mike Snitzer <snitzer@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Muchun Song <muchun.song@linux.dev> Cc: Nadav Amit <namit@vmware.com> Cc: Neil Brown <neilb@suse.de> Cc: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com> Cc: Olga Kornievskaia <kolga@netapp.com> Cc: Paul E. McKenney <paulmck@kernel.org> Cc: Richard Weinberger <richard@nod.at> Cc: Rob Clark <robdclark@gmail.com> Cc: Rob Herring <robh@kernel.org> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: Sean Paul <sean@poorly.run> Cc: Sergey Senozhatsky <senozhatsky@chromium.org> Cc: Song Liu <song@kernel.org> Cc: Stefano Stabellini <sstabellini@kernel.org> Cc: Steven Price <steven.price@arm.com> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com> Cc: Tom Talpey <tom@talpey.com> Cc: Trond Myklebust <trond.myklebust@hammerspace.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Cc: Yue Hu <huyue2@coolpad.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-09-11 09:44:37 +00:00
sb = shrink->private_data;
/*
* Deadlock avoidance. We may hold various FS locks, and we don't want
* to recurse into the FS that called us in clear_inode() and friends..
*/
shrinker: convert superblock shrinkers to new API Convert superblock shrinker to use the new count/scan API, and propagate the API changes through to the filesystem callouts. The filesystem callouts already use a count/scan API, so it's just changing counters to longs to match the VM API. This requires the dentry and inode shrinker callouts to be converted to the count/scan API. This is mainly a mechanical change. [glommer@openvz.org: use mult_frac for fractional proportions, build fixes] Signed-off-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Glauber Costa <glommer@openvz.org> Acked-by: Mel Gorman <mgorman@suse.de> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Cc: Arve Hjønnevåg <arve@android.com> Cc: Carlos Maiolino <cmaiolino@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Chuck Lever <chuck.lever@oracle.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: David Rientjes <rientjes@google.com> Cc: Gleb Natapov <gleb@redhat.com> Cc: Greg Thelen <gthelen@google.com> Cc: J. Bruce Fields <bfields@redhat.com> Cc: Jan Kara <jack@suse.cz> Cc: Jerome Glisse <jglisse@redhat.com> Cc: John Stultz <john.stultz@linaro.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Kent Overstreet <koverstreet@google.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Thomas Hellstrom <thellstrom@vmware.com> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-08-28 00:17:57 +00:00
if (!(sc->gfp_mask & __GFP_FS))
return SHRINK_STOP;
if (!super_trylock_shared(sb))
shrinker: convert superblock shrinkers to new API Convert superblock shrinker to use the new count/scan API, and propagate the API changes through to the filesystem callouts. The filesystem callouts already use a count/scan API, so it's just changing counters to longs to match the VM API. This requires the dentry and inode shrinker callouts to be converted to the count/scan API. This is mainly a mechanical change. [glommer@openvz.org: use mult_frac for fractional proportions, build fixes] Signed-off-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Glauber Costa <glommer@openvz.org> Acked-by: Mel Gorman <mgorman@suse.de> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Cc: Arve Hjønnevåg <arve@android.com> Cc: Carlos Maiolino <cmaiolino@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Chuck Lever <chuck.lever@oracle.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: David Rientjes <rientjes@google.com> Cc: Gleb Natapov <gleb@redhat.com> Cc: Greg Thelen <gthelen@google.com> Cc: J. Bruce Fields <bfields@redhat.com> Cc: Jan Kara <jack@suse.cz> Cc: Jerome Glisse <jglisse@redhat.com> Cc: John Stultz <john.stultz@linaro.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Kent Overstreet <koverstreet@google.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Thomas Hellstrom <thellstrom@vmware.com> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-08-28 00:17:57 +00:00
return SHRINK_STOP;
if (sb->s_op->nr_cached_objects)
fs_objects = sb->s_op->nr_cached_objects(sb, sc);
list_lru: introduce list_lru_shrink_{count,walk} Kmem accounting of memcg is unusable now, because it lacks slab shrinker support. That means when we hit the limit we will get ENOMEM w/o any chance to recover. What we should do then is to call shrink_slab, which would reclaim old inode/dentry caches from this cgroup. This is what this patch set is intended to do. Basically, it does two things. First, it introduces the notion of per-memcg slab shrinker. A shrinker that wants to reclaim objects per cgroup should mark itself as SHRINKER_MEMCG_AWARE. Then it will be passed the memory cgroup to scan from in shrink_control->memcg. For such shrinkers shrink_slab iterates over the whole cgroup subtree under the target cgroup and calls the shrinker for each kmem-active memory cgroup. Secondly, this patch set makes the list_lru structure per-memcg. It's done transparently to list_lru users - everything they have to do is to tell list_lru_init that they want memcg-aware list_lru. Then the list_lru will automatically distribute objects among per-memcg lists basing on which cgroup the object is accounted to. This way to make FS shrinkers (icache, dcache) memcg-aware we only need to make them use memcg-aware list_lru, and this is what this patch set does. As before, this patch set only enables per-memcg kmem reclaim when the pressure goes from memory.limit, not from memory.kmem.limit. Handling memory.kmem.limit is going to be tricky due to GFP_NOFS allocations, and it is still unclear whether we will have this knob in the unified hierarchy. This patch (of 9): NUMA aware slab shrinkers use the list_lru structure to distribute objects coming from different NUMA nodes to different lists. Whenever such a shrinker needs to count or scan objects from a particular node, it issues commands like this: count = list_lru_count_node(lru, sc->nid); freed = list_lru_walk_node(lru, sc->nid, isolate_func, isolate_arg, &sc->nr_to_scan); where sc is an instance of the shrink_control structure passed to it from vmscan. To simplify this, let's add special list_lru functions to be used by shrinkers, list_lru_shrink_count() and list_lru_shrink_walk(), which consolidate the nid and nr_to_scan arguments in the shrink_control structure. This will also allow us to avoid patching shrinkers that use list_lru when we make shrink_slab() per-memcg - all we will have to do is extend the shrink_control structure to include the target memcg and make list_lru_shrink_{count,walk} handle this appropriately. Signed-off-by: Vladimir Davydov <vdavydov@parallels.com> Suggested-by: Dave Chinner <david@fromorbit.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@suse.cz> Cc: Greg Thelen <gthelen@google.com> Cc: Glauber Costa <glommer@gmail.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Tejun Heo <tj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-12 22:58:47 +00:00
inodes = list_lru_shrink_count(&sb->s_inode_lru, sc);
dentries = list_lru_shrink_count(&sb->s_dentry_lru, sc);
total_objects = dentries + inodes + fs_objects + 1;
if (!total_objects)
total_objects = 1;
shrinker: convert superblock shrinkers to new API Convert superblock shrinker to use the new count/scan API, and propagate the API changes through to the filesystem callouts. The filesystem callouts already use a count/scan API, so it's just changing counters to longs to match the VM API. This requires the dentry and inode shrinker callouts to be converted to the count/scan API. This is mainly a mechanical change. [glommer@openvz.org: use mult_frac for fractional proportions, build fixes] Signed-off-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Glauber Costa <glommer@openvz.org> Acked-by: Mel Gorman <mgorman@suse.de> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Cc: Arve Hjønnevåg <arve@android.com> Cc: Carlos Maiolino <cmaiolino@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Chuck Lever <chuck.lever@oracle.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: David Rientjes <rientjes@google.com> Cc: Gleb Natapov <gleb@redhat.com> Cc: Greg Thelen <gthelen@google.com> Cc: J. Bruce Fields <bfields@redhat.com> Cc: Jan Kara <jack@suse.cz> Cc: Jerome Glisse <jglisse@redhat.com> Cc: John Stultz <john.stultz@linaro.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Kent Overstreet <koverstreet@google.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Thomas Hellstrom <thellstrom@vmware.com> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-08-28 00:17:57 +00:00
/* proportion the scan between the caches */
dentries = mult_frac(sc->nr_to_scan, dentries, total_objects);
inodes = mult_frac(sc->nr_to_scan, inodes, total_objects);
list_lru: introduce list_lru_shrink_{count,walk} Kmem accounting of memcg is unusable now, because it lacks slab shrinker support. That means when we hit the limit we will get ENOMEM w/o any chance to recover. What we should do then is to call shrink_slab, which would reclaim old inode/dentry caches from this cgroup. This is what this patch set is intended to do. Basically, it does two things. First, it introduces the notion of per-memcg slab shrinker. A shrinker that wants to reclaim objects per cgroup should mark itself as SHRINKER_MEMCG_AWARE. Then it will be passed the memory cgroup to scan from in shrink_control->memcg. For such shrinkers shrink_slab iterates over the whole cgroup subtree under the target cgroup and calls the shrinker for each kmem-active memory cgroup. Secondly, this patch set makes the list_lru structure per-memcg. It's done transparently to list_lru users - everything they have to do is to tell list_lru_init that they want memcg-aware list_lru. Then the list_lru will automatically distribute objects among per-memcg lists basing on which cgroup the object is accounted to. This way to make FS shrinkers (icache, dcache) memcg-aware we only need to make them use memcg-aware list_lru, and this is what this patch set does. As before, this patch set only enables per-memcg kmem reclaim when the pressure goes from memory.limit, not from memory.kmem.limit. Handling memory.kmem.limit is going to be tricky due to GFP_NOFS allocations, and it is still unclear whether we will have this knob in the unified hierarchy. This patch (of 9): NUMA aware slab shrinkers use the list_lru structure to distribute objects coming from different NUMA nodes to different lists. Whenever such a shrinker needs to count or scan objects from a particular node, it issues commands like this: count = list_lru_count_node(lru, sc->nid); freed = list_lru_walk_node(lru, sc->nid, isolate_func, isolate_arg, &sc->nr_to_scan); where sc is an instance of the shrink_control structure passed to it from vmscan. To simplify this, let's add special list_lru functions to be used by shrinkers, list_lru_shrink_count() and list_lru_shrink_walk(), which consolidate the nid and nr_to_scan arguments in the shrink_control structure. This will also allow us to avoid patching shrinkers that use list_lru when we make shrink_slab() per-memcg - all we will have to do is extend the shrink_control structure to include the target memcg and make list_lru_shrink_{count,walk} handle this appropriately. Signed-off-by: Vladimir Davydov <vdavydov@parallels.com> Suggested-by: Dave Chinner <david@fromorbit.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@suse.cz> Cc: Greg Thelen <gthelen@google.com> Cc: Glauber Costa <glommer@gmail.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Tejun Heo <tj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-12 22:58:47 +00:00
fs_objects = mult_frac(sc->nr_to_scan, fs_objects, total_objects);
shrinker: convert superblock shrinkers to new API Convert superblock shrinker to use the new count/scan API, and propagate the API changes through to the filesystem callouts. The filesystem callouts already use a count/scan API, so it's just changing counters to longs to match the VM API. This requires the dentry and inode shrinker callouts to be converted to the count/scan API. This is mainly a mechanical change. [glommer@openvz.org: use mult_frac for fractional proportions, build fixes] Signed-off-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Glauber Costa <glommer@openvz.org> Acked-by: Mel Gorman <mgorman@suse.de> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Cc: Arve Hjønnevåg <arve@android.com> Cc: Carlos Maiolino <cmaiolino@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Chuck Lever <chuck.lever@oracle.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: David Rientjes <rientjes@google.com> Cc: Gleb Natapov <gleb@redhat.com> Cc: Greg Thelen <gthelen@google.com> Cc: J. Bruce Fields <bfields@redhat.com> Cc: Jan Kara <jack@suse.cz> Cc: Jerome Glisse <jglisse@redhat.com> Cc: John Stultz <john.stultz@linaro.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Kent Overstreet <koverstreet@google.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Thomas Hellstrom <thellstrom@vmware.com> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-08-28 00:17:57 +00:00
/*
* prune the dcache first as the icache is pinned by it, then
* prune the icache, followed by the filesystem specific caches
*
* Ensure that we always scan at least one object - memcg kmem
* accounting uses this to fully empty the caches.
shrinker: convert superblock shrinkers to new API Convert superblock shrinker to use the new count/scan API, and propagate the API changes through to the filesystem callouts. The filesystem callouts already use a count/scan API, so it's just changing counters to longs to match the VM API. This requires the dentry and inode shrinker callouts to be converted to the count/scan API. This is mainly a mechanical change. [glommer@openvz.org: use mult_frac for fractional proportions, build fixes] Signed-off-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Glauber Costa <glommer@openvz.org> Acked-by: Mel Gorman <mgorman@suse.de> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Cc: Arve Hjønnevåg <arve@android.com> Cc: Carlos Maiolino <cmaiolino@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Chuck Lever <chuck.lever@oracle.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: David Rientjes <rientjes@google.com> Cc: Gleb Natapov <gleb@redhat.com> Cc: Greg Thelen <gthelen@google.com> Cc: J. Bruce Fields <bfields@redhat.com> Cc: Jan Kara <jack@suse.cz> Cc: Jerome Glisse <jglisse@redhat.com> Cc: John Stultz <john.stultz@linaro.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Kent Overstreet <koverstreet@google.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Thomas Hellstrom <thellstrom@vmware.com> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-08-28 00:17:57 +00:00
*/
sc->nr_to_scan = dentries + 1;
list_lru: introduce list_lru_shrink_{count,walk} Kmem accounting of memcg is unusable now, because it lacks slab shrinker support. That means when we hit the limit we will get ENOMEM w/o any chance to recover. What we should do then is to call shrink_slab, which would reclaim old inode/dentry caches from this cgroup. This is what this patch set is intended to do. Basically, it does two things. First, it introduces the notion of per-memcg slab shrinker. A shrinker that wants to reclaim objects per cgroup should mark itself as SHRINKER_MEMCG_AWARE. Then it will be passed the memory cgroup to scan from in shrink_control->memcg. For such shrinkers shrink_slab iterates over the whole cgroup subtree under the target cgroup and calls the shrinker for each kmem-active memory cgroup. Secondly, this patch set makes the list_lru structure per-memcg. It's done transparently to list_lru users - everything they have to do is to tell list_lru_init that they want memcg-aware list_lru. Then the list_lru will automatically distribute objects among per-memcg lists basing on which cgroup the object is accounted to. This way to make FS shrinkers (icache, dcache) memcg-aware we only need to make them use memcg-aware list_lru, and this is what this patch set does. As before, this patch set only enables per-memcg kmem reclaim when the pressure goes from memory.limit, not from memory.kmem.limit. Handling memory.kmem.limit is going to be tricky due to GFP_NOFS allocations, and it is still unclear whether we will have this knob in the unified hierarchy. This patch (of 9): NUMA aware slab shrinkers use the list_lru structure to distribute objects coming from different NUMA nodes to different lists. Whenever such a shrinker needs to count or scan objects from a particular node, it issues commands like this: count = list_lru_count_node(lru, sc->nid); freed = list_lru_walk_node(lru, sc->nid, isolate_func, isolate_arg, &sc->nr_to_scan); where sc is an instance of the shrink_control structure passed to it from vmscan. To simplify this, let's add special list_lru functions to be used by shrinkers, list_lru_shrink_count() and list_lru_shrink_walk(), which consolidate the nid and nr_to_scan arguments in the shrink_control structure. This will also allow us to avoid patching shrinkers that use list_lru when we make shrink_slab() per-memcg - all we will have to do is extend the shrink_control structure to include the target memcg and make list_lru_shrink_{count,walk} handle this appropriately. Signed-off-by: Vladimir Davydov <vdavydov@parallels.com> Suggested-by: Dave Chinner <david@fromorbit.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@suse.cz> Cc: Greg Thelen <gthelen@google.com> Cc: Glauber Costa <glommer@gmail.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Tejun Heo <tj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-12 22:58:47 +00:00
freed = prune_dcache_sb(sb, sc);
sc->nr_to_scan = inodes + 1;
list_lru: introduce list_lru_shrink_{count,walk} Kmem accounting of memcg is unusable now, because it lacks slab shrinker support. That means when we hit the limit we will get ENOMEM w/o any chance to recover. What we should do then is to call shrink_slab, which would reclaim old inode/dentry caches from this cgroup. This is what this patch set is intended to do. Basically, it does two things. First, it introduces the notion of per-memcg slab shrinker. A shrinker that wants to reclaim objects per cgroup should mark itself as SHRINKER_MEMCG_AWARE. Then it will be passed the memory cgroup to scan from in shrink_control->memcg. For such shrinkers shrink_slab iterates over the whole cgroup subtree under the target cgroup and calls the shrinker for each kmem-active memory cgroup. Secondly, this patch set makes the list_lru structure per-memcg. It's done transparently to list_lru users - everything they have to do is to tell list_lru_init that they want memcg-aware list_lru. Then the list_lru will automatically distribute objects among per-memcg lists basing on which cgroup the object is accounted to. This way to make FS shrinkers (icache, dcache) memcg-aware we only need to make them use memcg-aware list_lru, and this is what this patch set does. As before, this patch set only enables per-memcg kmem reclaim when the pressure goes from memory.limit, not from memory.kmem.limit. Handling memory.kmem.limit is going to be tricky due to GFP_NOFS allocations, and it is still unclear whether we will have this knob in the unified hierarchy. This patch (of 9): NUMA aware slab shrinkers use the list_lru structure to distribute objects coming from different NUMA nodes to different lists. Whenever such a shrinker needs to count or scan objects from a particular node, it issues commands like this: count = list_lru_count_node(lru, sc->nid); freed = list_lru_walk_node(lru, sc->nid, isolate_func, isolate_arg, &sc->nr_to_scan); where sc is an instance of the shrink_control structure passed to it from vmscan. To simplify this, let's add special list_lru functions to be used by shrinkers, list_lru_shrink_count() and list_lru_shrink_walk(), which consolidate the nid and nr_to_scan arguments in the shrink_control structure. This will also allow us to avoid patching shrinkers that use list_lru when we make shrink_slab() per-memcg - all we will have to do is extend the shrink_control structure to include the target memcg and make list_lru_shrink_{count,walk} handle this appropriately. Signed-off-by: Vladimir Davydov <vdavydov@parallels.com> Suggested-by: Dave Chinner <david@fromorbit.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@suse.cz> Cc: Greg Thelen <gthelen@google.com> Cc: Glauber Costa <glommer@gmail.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Tejun Heo <tj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-12 22:58:47 +00:00
freed += prune_icache_sb(sb, sc);
shrinker: convert superblock shrinkers to new API Convert superblock shrinker to use the new count/scan API, and propagate the API changes through to the filesystem callouts. The filesystem callouts already use a count/scan API, so it's just changing counters to longs to match the VM API. This requires the dentry and inode shrinker callouts to be converted to the count/scan API. This is mainly a mechanical change. [glommer@openvz.org: use mult_frac for fractional proportions, build fixes] Signed-off-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Glauber Costa <glommer@openvz.org> Acked-by: Mel Gorman <mgorman@suse.de> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Cc: Arve Hjønnevåg <arve@android.com> Cc: Carlos Maiolino <cmaiolino@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Chuck Lever <chuck.lever@oracle.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: David Rientjes <rientjes@google.com> Cc: Gleb Natapov <gleb@redhat.com> Cc: Greg Thelen <gthelen@google.com> Cc: J. Bruce Fields <bfields@redhat.com> Cc: Jan Kara <jack@suse.cz> Cc: Jerome Glisse <jglisse@redhat.com> Cc: John Stultz <john.stultz@linaro.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Kent Overstreet <koverstreet@google.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Thomas Hellstrom <thellstrom@vmware.com> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-08-28 00:17:57 +00:00
if (fs_objects) {
sc->nr_to_scan = fs_objects + 1;
freed += sb->s_op->free_cached_objects(sb, sc);
}
super_unlock_shared(sb);
shrinker: convert superblock shrinkers to new API Convert superblock shrinker to use the new count/scan API, and propagate the API changes through to the filesystem callouts. The filesystem callouts already use a count/scan API, so it's just changing counters to longs to match the VM API. This requires the dentry and inode shrinker callouts to be converted to the count/scan API. This is mainly a mechanical change. [glommer@openvz.org: use mult_frac for fractional proportions, build fixes] Signed-off-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Glauber Costa <glommer@openvz.org> Acked-by: Mel Gorman <mgorman@suse.de> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Cc: Arve Hjønnevåg <arve@android.com> Cc: Carlos Maiolino <cmaiolino@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Chuck Lever <chuck.lever@oracle.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: David Rientjes <rientjes@google.com> Cc: Gleb Natapov <gleb@redhat.com> Cc: Greg Thelen <gthelen@google.com> Cc: J. Bruce Fields <bfields@redhat.com> Cc: Jan Kara <jack@suse.cz> Cc: Jerome Glisse <jglisse@redhat.com> Cc: John Stultz <john.stultz@linaro.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Kent Overstreet <koverstreet@google.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Thomas Hellstrom <thellstrom@vmware.com> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-08-28 00:17:57 +00:00
return freed;
}
static unsigned long super_cache_count(struct shrinker *shrink,
struct shrink_control *sc)
{
struct super_block *sb;
long total_objects = 0;
fs: super: dynamically allocate the s_shrink In preparation for implementing lockless slab shrink, use new APIs to dynamically allocate the s_shrink, so that it can be freed asynchronously via RCU. Then it doesn't need to wait for RCU read-side critical section when releasing the struct super_block. Link: https://lkml.kernel.org/r/20230911094444.68966-39-zhengqi.arch@bytedance.com Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com> Reviewed-by: Muchun Song <songmuchun@bytedance.com> Acked-by: David Sterba <dsterba@suse.com> Cc: Chris Mason <clm@fb.com> Cc: Josef Bacik <josef@toxicpanda.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Christian Brauner <brauner@kernel.org> Cc: Abhinav Kumar <quic_abhinavk@quicinc.com> Cc: Alasdair Kergon <agk@redhat.com> Cc: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com> Cc: Andreas Dilger <adilger.kernel@dilger.ca> Cc: Andreas Gruenbacher <agruenba@redhat.com> Cc: Anna Schumaker <anna@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Bob Peterson <rpeterso@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Carlos Llamas <cmllamas@google.com> Cc: Chandan Babu R <chandan.babu@oracle.com> Cc: Chao Yu <chao@kernel.org> Cc: Christian Koenig <christian.koenig@amd.com> Cc: Chuck Lever <cel@kernel.org> Cc: Coly Li <colyli@suse.de> Cc: Dai Ngo <Dai.Ngo@oracle.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: "Darrick J. Wong" <djwong@kernel.org> Cc: Dave Chinner <david@fromorbit.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David Airlie <airlied@gmail.com> Cc: David Hildenbrand <david@redhat.com> Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Cc: Gao Xiang <hsiangkao@linux.alibaba.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Huang Rui <ray.huang@amd.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jaegeuk Kim <jaegeuk@kernel.org> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Jan Kara <jack@suse.cz> Cc: Jason Wang <jasowang@redhat.com> Cc: Jeff Layton <jlayton@kernel.org> Cc: Jeffle Xu <jefflexu@linux.alibaba.com> Cc: Joel Fernandes (Google) <joel@joelfernandes.org> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Juergen Gross <jgross@suse.com> Cc: Kent Overstreet <kent.overstreet@gmail.com> Cc: Kirill Tkhai <tkhai@ya.ru> Cc: Marijn Suijten <marijn.suijten@somainline.org> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Mike Snitzer <snitzer@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Muchun Song <muchun.song@linux.dev> Cc: Nadav Amit <namit@vmware.com> Cc: Neil Brown <neilb@suse.de> Cc: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com> Cc: Olga Kornievskaia <kolga@netapp.com> Cc: Paul E. McKenney <paulmck@kernel.org> Cc: Richard Weinberger <richard@nod.at> Cc: Rob Clark <robdclark@gmail.com> Cc: Rob Herring <robh@kernel.org> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: Sean Paul <sean@poorly.run> Cc: Sergey Senozhatsky <senozhatsky@chromium.org> Cc: Song Liu <song@kernel.org> Cc: Stefano Stabellini <sstabellini@kernel.org> Cc: Steven Price <steven.price@arm.com> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com> Cc: Tom Talpey <tom@talpey.com> Cc: Trond Myklebust <trond.myklebust@hammerspace.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Cc: Yue Hu <huyue2@coolpad.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-09-11 09:44:37 +00:00
sb = shrink->private_data;
shrinker: convert superblock shrinkers to new API Convert superblock shrinker to use the new count/scan API, and propagate the API changes through to the filesystem callouts. The filesystem callouts already use a count/scan API, so it's just changing counters to longs to match the VM API. This requires the dentry and inode shrinker callouts to be converted to the count/scan API. This is mainly a mechanical change. [glommer@openvz.org: use mult_frac for fractional proportions, build fixes] Signed-off-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Glauber Costa <glommer@openvz.org> Acked-by: Mel Gorman <mgorman@suse.de> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Cc: Arve Hjønnevåg <arve@android.com> Cc: Carlos Maiolino <cmaiolino@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Chuck Lever <chuck.lever@oracle.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: David Rientjes <rientjes@google.com> Cc: Gleb Natapov <gleb@redhat.com> Cc: Greg Thelen <gthelen@google.com> Cc: J. Bruce Fields <bfields@redhat.com> Cc: Jan Kara <jack@suse.cz> Cc: Jerome Glisse <jglisse@redhat.com> Cc: John Stultz <john.stultz@linaro.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Kent Overstreet <koverstreet@google.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Thomas Hellstrom <thellstrom@vmware.com> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-08-28 00:17:57 +00:00
fs/superblock: avoid locking counting inodes and dentries before reclaiming them We remove the call to grab_super_passive in call to super_cache_count. This becomes a scalability bottleneck as multiple threads are trying to do memory reclamation, e.g. when we are doing large amount of file read and page cache is under pressure. The cached objects quickly got reclaimed down to 0 and we are aborting the cache_scan() reclaim. But counting creates a log jam acquiring the sb_lock. We are holding the shrinker_rwsem which ensures the safety of call to list_lru_count_node() and s_op->nr_cached_objects. The shrinker is unregistered now before ->kill_sb() so the operation is safe when we are doing unmount. The impact will depend heavily on the machine and the workload but for a small machine using postmark tuned to use 4xRAM size the results were 3.15.0-rc5 3.15.0-rc5 vanilla shrinker-v1r1 Ops/sec Transactions 21.00 ( 0.00%) 24.00 ( 14.29%) Ops/sec FilesCreate 39.00 ( 0.00%) 44.00 ( 12.82%) Ops/sec CreateTransact 10.00 ( 0.00%) 12.00 ( 20.00%) Ops/sec FilesDeleted 6202.00 ( 0.00%) 6202.00 ( 0.00%) Ops/sec DeleteTransact 11.00 ( 0.00%) 12.00 ( 9.09%) Ops/sec DataRead/MB 25.97 ( 0.00%) 29.10 ( 12.05%) Ops/sec DataWrite/MB 49.99 ( 0.00%) 56.02 ( 12.06%) ffsb running in a configuration that is meant to simulate a mail server showed 3.15.0-rc5 3.15.0-rc5 vanilla shrinker-v1r1 Ops/sec readall 9402.63 ( 0.00%) 9567.97 ( 1.76%) Ops/sec create 4695.45 ( 0.00%) 4735.00 ( 0.84%) Ops/sec delete 173.72 ( 0.00%) 179.83 ( 3.52%) Ops/sec Transactions 14271.80 ( 0.00%) 14482.81 ( 1.48%) Ops/sec Read 37.00 ( 0.00%) 37.60 ( 1.62%) Ops/sec Write 18.20 ( 0.00%) 18.30 ( 0.55%) Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com> Signed-off-by: Mel Gorman <mgorman@suse.de> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Hugh Dickins <hughd@google.com> Cc: Dave Chinner <david@fromorbit.com> Tested-by: Yuanhan Liu <yuanhan.liu@linux.intel.com> Cc: Bob Liu <bob.liu@oracle.com> Cc: Jan Kara <jack@suse.cz> Acked-by: Rik van Riel <riel@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-04 23:10:47 +00:00
/*
* We don't call super_trylock_shared() here as it is a scalability
* bottleneck, so we're exposed to partial setup state. The shrinker
* rwsem does not protect filesystem operations backing
* list_lru_shrink_count() or s_op->nr_cached_objects(). Counts can
* change between super_cache_count and super_cache_scan, so we really
* don't need locks here.
fs: don't scan the inode cache before SB_BORN is set We recently had an oops reported on a 4.14 kernel in xfs_reclaim_inodes_count() where sb->s_fs_info pointed to garbage and so the m_perag_tree lookup walked into lala land. It produces an oops down this path during the failed mount: radix_tree_gang_lookup_tag+0xc4/0x130 xfs_perag_get_tag+0x37/0xf0 xfs_reclaim_inodes_count+0x32/0x40 xfs_fs_nr_cached_objects+0x11/0x20 super_cache_count+0x35/0xc0 shrink_slab.part.66+0xb1/0x370 shrink_node+0x7e/0x1a0 try_to_free_pages+0x199/0x470 __alloc_pages_slowpath+0x3a1/0xd20 __alloc_pages_nodemask+0x1c3/0x200 cache_grow_begin+0x20b/0x2e0 fallback_alloc+0x160/0x200 kmem_cache_alloc+0x111/0x4e0 The problem is that the superblock shrinker is running before the filesystem structures it depends on have been fully set up. i.e. the shrinker is registered in sget(), before ->fill_super() has been called, and the shrinker can call into the filesystem before fill_super() does it's setup work. Essentially we are exposed to both use-after-free and use-before-initialisation bugs here. To fix this, add a check for the SB_BORN flag in super_cache_count. In general, this flag is not set until ->fs_mount() completes successfully, so we know that it is set after the filesystem setup has completed. This matches the trylock_super() behaviour which will not let super_cache_scan() run if SB_BORN is not set, and hence will not allow the superblock shrinker from entering the filesystem while it is being set up or after it has failed setup and is being torn down. Cc: stable@kernel.org Signed-Off-By: Dave Chinner <dchinner@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2018-05-11 01:20:57 +00:00
*
* However, if we are currently mounting the superblock, the underlying
* filesystem might be in a state of partial construction and hence it
* is dangerous to access it. super_trylock_shared() uses a SB_BORN check
* to avoid this situation, so do the same here. The memory barrier is
fs: don't scan the inode cache before SB_BORN is set We recently had an oops reported on a 4.14 kernel in xfs_reclaim_inodes_count() where sb->s_fs_info pointed to garbage and so the m_perag_tree lookup walked into lala land. It produces an oops down this path during the failed mount: radix_tree_gang_lookup_tag+0xc4/0x130 xfs_perag_get_tag+0x37/0xf0 xfs_reclaim_inodes_count+0x32/0x40 xfs_fs_nr_cached_objects+0x11/0x20 super_cache_count+0x35/0xc0 shrink_slab.part.66+0xb1/0x370 shrink_node+0x7e/0x1a0 try_to_free_pages+0x199/0x470 __alloc_pages_slowpath+0x3a1/0xd20 __alloc_pages_nodemask+0x1c3/0x200 cache_grow_begin+0x20b/0x2e0 fallback_alloc+0x160/0x200 kmem_cache_alloc+0x111/0x4e0 The problem is that the superblock shrinker is running before the filesystem structures it depends on have been fully set up. i.e. the shrinker is registered in sget(), before ->fill_super() has been called, and the shrinker can call into the filesystem before fill_super() does it's setup work. Essentially we are exposed to both use-after-free and use-before-initialisation bugs here. To fix this, add a check for the SB_BORN flag in super_cache_count. In general, this flag is not set until ->fs_mount() completes successfully, so we know that it is set after the filesystem setup has completed. This matches the trylock_super() behaviour which will not let super_cache_scan() run if SB_BORN is not set, and hence will not allow the superblock shrinker from entering the filesystem while it is being set up or after it has failed setup and is being torn down. Cc: stable@kernel.org Signed-Off-By: Dave Chinner <dchinner@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2018-05-11 01:20:57 +00:00
* matched with the one in mount_fs() as we don't hold locks here.
fs/superblock: avoid locking counting inodes and dentries before reclaiming them We remove the call to grab_super_passive in call to super_cache_count. This becomes a scalability bottleneck as multiple threads are trying to do memory reclamation, e.g. when we are doing large amount of file read and page cache is under pressure. The cached objects quickly got reclaimed down to 0 and we are aborting the cache_scan() reclaim. But counting creates a log jam acquiring the sb_lock. We are holding the shrinker_rwsem which ensures the safety of call to list_lru_count_node() and s_op->nr_cached_objects. The shrinker is unregistered now before ->kill_sb() so the operation is safe when we are doing unmount. The impact will depend heavily on the machine and the workload but for a small machine using postmark tuned to use 4xRAM size the results were 3.15.0-rc5 3.15.0-rc5 vanilla shrinker-v1r1 Ops/sec Transactions 21.00 ( 0.00%) 24.00 ( 14.29%) Ops/sec FilesCreate 39.00 ( 0.00%) 44.00 ( 12.82%) Ops/sec CreateTransact 10.00 ( 0.00%) 12.00 ( 20.00%) Ops/sec FilesDeleted 6202.00 ( 0.00%) 6202.00 ( 0.00%) Ops/sec DeleteTransact 11.00 ( 0.00%) 12.00 ( 9.09%) Ops/sec DataRead/MB 25.97 ( 0.00%) 29.10 ( 12.05%) Ops/sec DataWrite/MB 49.99 ( 0.00%) 56.02 ( 12.06%) ffsb running in a configuration that is meant to simulate a mail server showed 3.15.0-rc5 3.15.0-rc5 vanilla shrinker-v1r1 Ops/sec readall 9402.63 ( 0.00%) 9567.97 ( 1.76%) Ops/sec create 4695.45 ( 0.00%) 4735.00 ( 0.84%) Ops/sec delete 173.72 ( 0.00%) 179.83 ( 3.52%) Ops/sec Transactions 14271.80 ( 0.00%) 14482.81 ( 1.48%) Ops/sec Read 37.00 ( 0.00%) 37.60 ( 1.62%) Ops/sec Write 18.20 ( 0.00%) 18.30 ( 0.55%) Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com> Signed-off-by: Mel Gorman <mgorman@suse.de> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Hugh Dickins <hughd@google.com> Cc: Dave Chinner <david@fromorbit.com> Tested-by: Yuanhan Liu <yuanhan.liu@linux.intel.com> Cc: Bob Liu <bob.liu@oracle.com> Cc: Jan Kara <jack@suse.cz> Acked-by: Rik van Riel <riel@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-04 23:10:47 +00:00
*/
fs: don't scan the inode cache before SB_BORN is set We recently had an oops reported on a 4.14 kernel in xfs_reclaim_inodes_count() where sb->s_fs_info pointed to garbage and so the m_perag_tree lookup walked into lala land. It produces an oops down this path during the failed mount: radix_tree_gang_lookup_tag+0xc4/0x130 xfs_perag_get_tag+0x37/0xf0 xfs_reclaim_inodes_count+0x32/0x40 xfs_fs_nr_cached_objects+0x11/0x20 super_cache_count+0x35/0xc0 shrink_slab.part.66+0xb1/0x370 shrink_node+0x7e/0x1a0 try_to_free_pages+0x199/0x470 __alloc_pages_slowpath+0x3a1/0xd20 __alloc_pages_nodemask+0x1c3/0x200 cache_grow_begin+0x20b/0x2e0 fallback_alloc+0x160/0x200 kmem_cache_alloc+0x111/0x4e0 The problem is that the superblock shrinker is running before the filesystem structures it depends on have been fully set up. i.e. the shrinker is registered in sget(), before ->fill_super() has been called, and the shrinker can call into the filesystem before fill_super() does it's setup work. Essentially we are exposed to both use-after-free and use-before-initialisation bugs here. To fix this, add a check for the SB_BORN flag in super_cache_count. In general, this flag is not set until ->fs_mount() completes successfully, so we know that it is set after the filesystem setup has completed. This matches the trylock_super() behaviour which will not let super_cache_scan() run if SB_BORN is not set, and hence will not allow the superblock shrinker from entering the filesystem while it is being set up or after it has failed setup and is being torn down. Cc: stable@kernel.org Signed-Off-By: Dave Chinner <dchinner@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2018-05-11 01:20:57 +00:00
if (!(sb->s_flags & SB_BORN))
return 0;
smp_rmb();
shrinker: convert superblock shrinkers to new API Convert superblock shrinker to use the new count/scan API, and propagate the API changes through to the filesystem callouts. The filesystem callouts already use a count/scan API, so it's just changing counters to longs to match the VM API. This requires the dentry and inode shrinker callouts to be converted to the count/scan API. This is mainly a mechanical change. [glommer@openvz.org: use mult_frac for fractional proportions, build fixes] Signed-off-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Glauber Costa <glommer@openvz.org> Acked-by: Mel Gorman <mgorman@suse.de> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Cc: Arve Hjønnevåg <arve@android.com> Cc: Carlos Maiolino <cmaiolino@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Chuck Lever <chuck.lever@oracle.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: David Rientjes <rientjes@google.com> Cc: Gleb Natapov <gleb@redhat.com> Cc: Greg Thelen <gthelen@google.com> Cc: J. Bruce Fields <bfields@redhat.com> Cc: Jan Kara <jack@suse.cz> Cc: Jerome Glisse <jglisse@redhat.com> Cc: John Stultz <john.stultz@linaro.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Kent Overstreet <koverstreet@google.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Thomas Hellstrom <thellstrom@vmware.com> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-08-28 00:17:57 +00:00
if (sb->s_op && sb->s_op->nr_cached_objects)
total_objects = sb->s_op->nr_cached_objects(sb, sc);
shrinker: convert superblock shrinkers to new API Convert superblock shrinker to use the new count/scan API, and propagate the API changes through to the filesystem callouts. The filesystem callouts already use a count/scan API, so it's just changing counters to longs to match the VM API. This requires the dentry and inode shrinker callouts to be converted to the count/scan API. This is mainly a mechanical change. [glommer@openvz.org: use mult_frac for fractional proportions, build fixes] Signed-off-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Glauber Costa <glommer@openvz.org> Acked-by: Mel Gorman <mgorman@suse.de> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Cc: Arve Hjønnevåg <arve@android.com> Cc: Carlos Maiolino <cmaiolino@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Chuck Lever <chuck.lever@oracle.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: David Rientjes <rientjes@google.com> Cc: Gleb Natapov <gleb@redhat.com> Cc: Greg Thelen <gthelen@google.com> Cc: J. Bruce Fields <bfields@redhat.com> Cc: Jan Kara <jack@suse.cz> Cc: Jerome Glisse <jglisse@redhat.com> Cc: John Stultz <john.stultz@linaro.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Kent Overstreet <koverstreet@google.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Thomas Hellstrom <thellstrom@vmware.com> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-08-28 00:17:57 +00:00
list_lru: introduce list_lru_shrink_{count,walk} Kmem accounting of memcg is unusable now, because it lacks slab shrinker support. That means when we hit the limit we will get ENOMEM w/o any chance to recover. What we should do then is to call shrink_slab, which would reclaim old inode/dentry caches from this cgroup. This is what this patch set is intended to do. Basically, it does two things. First, it introduces the notion of per-memcg slab shrinker. A shrinker that wants to reclaim objects per cgroup should mark itself as SHRINKER_MEMCG_AWARE. Then it will be passed the memory cgroup to scan from in shrink_control->memcg. For such shrinkers shrink_slab iterates over the whole cgroup subtree under the target cgroup and calls the shrinker for each kmem-active memory cgroup. Secondly, this patch set makes the list_lru structure per-memcg. It's done transparently to list_lru users - everything they have to do is to tell list_lru_init that they want memcg-aware list_lru. Then the list_lru will automatically distribute objects among per-memcg lists basing on which cgroup the object is accounted to. This way to make FS shrinkers (icache, dcache) memcg-aware we only need to make them use memcg-aware list_lru, and this is what this patch set does. As before, this patch set only enables per-memcg kmem reclaim when the pressure goes from memory.limit, not from memory.kmem.limit. Handling memory.kmem.limit is going to be tricky due to GFP_NOFS allocations, and it is still unclear whether we will have this knob in the unified hierarchy. This patch (of 9): NUMA aware slab shrinkers use the list_lru structure to distribute objects coming from different NUMA nodes to different lists. Whenever such a shrinker needs to count or scan objects from a particular node, it issues commands like this: count = list_lru_count_node(lru, sc->nid); freed = list_lru_walk_node(lru, sc->nid, isolate_func, isolate_arg, &sc->nr_to_scan); where sc is an instance of the shrink_control structure passed to it from vmscan. To simplify this, let's add special list_lru functions to be used by shrinkers, list_lru_shrink_count() and list_lru_shrink_walk(), which consolidate the nid and nr_to_scan arguments in the shrink_control structure. This will also allow us to avoid patching shrinkers that use list_lru when we make shrink_slab() per-memcg - all we will have to do is extend the shrink_control structure to include the target memcg and make list_lru_shrink_{count,walk} handle this appropriately. Signed-off-by: Vladimir Davydov <vdavydov@parallels.com> Suggested-by: Dave Chinner <david@fromorbit.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@suse.cz> Cc: Greg Thelen <gthelen@google.com> Cc: Glauber Costa <glommer@gmail.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Tejun Heo <tj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-02-12 22:58:47 +00:00
total_objects += list_lru_shrink_count(&sb->s_dentry_lru, sc);
total_objects += list_lru_shrink_count(&sb->s_inode_lru, sc);
shrinker: convert superblock shrinkers to new API Convert superblock shrinker to use the new count/scan API, and propagate the API changes through to the filesystem callouts. The filesystem callouts already use a count/scan API, so it's just changing counters to longs to match the VM API. This requires the dentry and inode shrinker callouts to be converted to the count/scan API. This is mainly a mechanical change. [glommer@openvz.org: use mult_frac for fractional proportions, build fixes] Signed-off-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Glauber Costa <glommer@openvz.org> Acked-by: Mel Gorman <mgorman@suse.de> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Cc: Arve Hjønnevåg <arve@android.com> Cc: Carlos Maiolino <cmaiolino@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Chuck Lever <chuck.lever@oracle.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: David Rientjes <rientjes@google.com> Cc: Gleb Natapov <gleb@redhat.com> Cc: Greg Thelen <gthelen@google.com> Cc: J. Bruce Fields <bfields@redhat.com> Cc: Jan Kara <jack@suse.cz> Cc: Jerome Glisse <jglisse@redhat.com> Cc: John Stultz <john.stultz@linaro.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Kent Overstreet <koverstreet@google.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Thomas Hellstrom <thellstrom@vmware.com> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-08-28 00:17:57 +00:00
mm: add SHRINK_EMPTY shrinker methods return value We need to distinguish the situations when shrinker has very small amount of objects (see vfs_pressure_ratio() called from super_cache_count()), and when it has no objects at all. Currently, in the both of these cases, shrinker::count_objects() returns 0. The patch introduces new SHRINK_EMPTY return value, which will be used for "no objects at all" case. It's is a refactoring mostly, as SHRINK_EMPTY is replaced by 0 by all callers of do_shrink_slab() in this patch, and all the magic will happen in further. Link: http://lkml.kernel.org/r/153063069574.1818.11037751256699341813.stgit@localhost.localdomain Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com> Acked-by: Vladimir Davydov <vdavydov.dev@gmail.com> Tested-by: Shakeel Butt <shakeelb@google.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Guenter Roeck <linux@roeck-us.net> Cc: "Huang, Ying" <ying.huang@intel.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Josef Bacik <jbacik@fb.com> Cc: Li RongQing <lirongqing@baidu.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Matthias Kaehlcke <mka@chromium.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Michal Hocko <mhocko@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Philippe Ombredanne <pombredanne@nexb.com> Cc: Roman Gushchin <guro@fb.com> Cc: Sahitya Tummala <stummala@codeaurora.org> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Waiman Long <longman@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-17 22:48:21 +00:00
if (!total_objects)
return SHRINK_EMPTY;
super: fix calculation of shrinkable objects for small numbers The sysctl knob sysctl_vfs_cache_pressure is used to determine which percentage of the shrinkable objects in our cache we should actively try to shrink. It works great in situations in which we have many objects (at least more than 100), because the aproximation errors will be negligible. But if this is not the case, specially when total_objects < 100, we may end up concluding that we have no objects at all (total / 100 = 0, if total < 100). This is certainly not the biggest killer in the world, but may matter in very low kernel memory situations. Signed-off-by: Glauber Costa <glommer@openvz.org> Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com> Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Acked-by: Mel Gorman <mgorman@suse.de> Cc: Dave Chinner <david@fromorbit.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Cc: Arve Hjønnevåg <arve@android.com> Cc: Carlos Maiolino <cmaiolino@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Chuck Lever <chuck.lever@oracle.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: David Rientjes <rientjes@google.com> Cc: Gleb Natapov <gleb@redhat.com> Cc: Greg Thelen <gthelen@google.com> Cc: J. Bruce Fields <bfields@redhat.com> Cc: Jan Kara <jack@suse.cz> Cc: Jerome Glisse <jglisse@redhat.com> Cc: John Stultz <john.stultz@linaro.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Kent Overstreet <koverstreet@google.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Thomas Hellstrom <thellstrom@vmware.com> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-08-28 00:17:53 +00:00
total_objects = vfs_pressure_ratio(total_objects);
return total_objects;
}
static void destroy_super_work(struct work_struct *work)
{
struct super_block *s = container_of(work, struct super_block,
destroy_work);
int i;
for (i = 0; i < SB_FREEZE_LEVELS; i++)
change sb_writers to use percpu_rw_semaphore We can remove everything from struct sb_writers except frozen and add the array of percpu_rw_semaphore's instead. This patch doesn't remove sb_writers->wait_unfrozen yet, we keep it for get_super_thawed(). We will probably remove it later. This change tries to address the following problems: - Firstly, __sb_start_write() looks simply buggy. It does __sb_end_write() if it sees ->frozen, but if it migrates to another CPU before percpu_counter_dec(), sb_wait_write() can wrongly succeed if there is another task which holds the same "semaphore": sb_wait_write() can miss the result of the previous percpu_counter_inc() but see the result of this percpu_counter_dec(). - As Dave Hansen reports, it is suboptimal. The trivial microbenchmark that writes to a tmpfs file in a loop runs 12% faster if we change this code to rely on RCU and kill the memory barriers. - This code doesn't look simple. It would be better to rely on the generic locking code. According to Dave, this change adds the same performance improvement. Note: with this change both freeze_super() and thaw_super() will do synchronize_sched_expedited() 3 times. This is just ugly. But: - This will be "fixed" by the rcu_sync changes we are going to merge. After that freeze_super()->percpu_down_write() will use synchronize_sched(), and thaw_super() won't use synchronize() at all. This doesn't need any changes in fs/super.c. - Once we merge rcu_sync changes, we can also change super.c so that all wb_write->rw_sem's will share the single ->rss in struct sb_writes, then freeze_super() will need only one synchronize_sched(). Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Jan Kara <jack@suse.com>
2015-08-11 15:05:04 +00:00
percpu_free_rwsem(&s->s_writers.rw_sem[i]);
kfree(s);
}
static void destroy_super_rcu(struct rcu_head *head)
{
struct super_block *s = container_of(head, struct super_block, rcu);
INIT_WORK(&s->destroy_work, destroy_super_work);
schedule_work(&s->destroy_work);
}
/* Free a superblock that has never been seen by anyone */
static void destroy_unused_super(struct super_block *s)
fs: Improve filesystem freezing handling vfs_check_frozen() tests are racy since the filesystem can be frozen just after the test is performed. Thus in write paths we can end up marking some pages or inodes dirty even though the file system is already frozen. This creates problems with flusher thread hanging on frozen filesystem. Another problem is that exclusion between ->page_mkwrite() and filesystem freezing has been handled by setting page dirty and then verifying s_frozen. This guaranteed that either the freezing code sees the faulted page, writes it, and writeprotects it again or we see s_frozen set and bail out of page fault. This works to protect from page being marked writeable while filesystem freezing is running but has an unpleasant artefact of leaving dirty (although unmodified and writeprotected) pages on frozen filesystem resulting in similar problems with flusher thread as the first problem. This patch aims at providing exclusion between write paths and filesystem freezing. We implement a writer-freeze read-write semaphore in the superblock. Actually, there are three such semaphores because of lock ranking reasons - one for page fault handlers (->page_mkwrite), one for all other writers, and one of internal filesystem purposes (used e.g. to track running transactions). Write paths which should block freezing (e.g. directory operations, ->aio_write(), ->page_mkwrite) hold reader side of the semaphore. Code freezing the filesystem takes the writer side. Only that we don't really want to bounce cachelines of the semaphores between CPUs for each write happening. So we implement the reader side of the semaphore as a per-cpu counter and the writer side is implemented using s_writers.frozen superblock field. [AV: microoptimize sb_start_write(); we want it fast in normal case] BugLink: https://bugs.launchpad.net/bugs/897421 Tested-by: Kamal Mostafa <kamal@canonical.com> Tested-by: Peter M. Petrakis <peter.petrakis@canonical.com> Tested-by: Dann Frazier <dann.frazier@canonical.com> Tested-by: Massimo Morana <massimo.morana@canonical.com> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-06-12 14:20:34 +00:00
{
if (!s)
return;
super_unlock_excl(s);
list_lru_destroy(&s->s_dentry_lru);
list_lru_destroy(&s->s_inode_lru);
security_sb_free(s);
fs: Add user namespace member to struct super_block Start marking filesystems with a user namespace owner, s_user_ns. In this change this is only used for permission checks of who may mount a filesystem. Ultimately s_user_ns will be used for translating ids and checking capabilities for filesystems mounted from user namespaces. The default policy for setting s_user_ns is implemented in sget(), which arranges for s_user_ns to be set to current_user_ns() and to ensure that the mounter of the filesystem has CAP_SYS_ADMIN in that user_ns. The guts of sget are split out into another function sget_userns(). The function sget_userns calls alloc_super with the specified user namespace or it verifies the existing superblock that was found has the expected user namespace, and fails with EBUSY when it is not. This failing prevents users with the wrong privileges mounting a filesystem. The reason for the split of sget_userns from sget is that in some cases such as mount_ns and kernfs_mount_ns a different policy for permission checking of mounts and setting s_user_ns is necessary, and the existence of sget_userns() allows those policies to be implemented. The helper mount_ns is expected to be used for filesystems such as proc and mqueuefs which present per namespace information. The function mount_ns is modified to call sget_userns instead of sget to ensure the user namespace owner of the namespace whose information is presented by the filesystem is used on the superblock. For sysfs and cgroup the appropriate permission checks are already in place, and kernfs_mount_ns is modified to call sget_userns so that the init_user_ns is the only user namespace used. For the cgroup filesystem cgroup namespace mounts are bind mounts of a subset of the full cgroup filesystem and as such s_user_ns must be the same for all of them as there is only a single superblock. Mounts of sysfs that vary based on the network namespace could in principle change s_user_ns but it keeps the analysis and implementation of kernfs simpler if that is not supported, and at present there appear to be no benefits from supporting a different s_user_ns on any sysfs mount. Getting the details of setting s_user_ns correct has been a long process. Thanks to Pavel Tikhorirorv who spotted a leak in sget_userns. Thanks to Seth Forshee who has kept the work alive. Thanks-to: Seth Forshee <seth.forshee@canonical.com> Thanks-to: Pavel Tikhomirov <ptikhomirov@virtuozzo.com> Acked-by: Seth Forshee <seth.forshee@canonical.com> Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2016-05-24 14:29:01 +00:00
put_user_ns(s->s_user_ns);
kfree(s->s_subtype);
fs: super: dynamically allocate the s_shrink In preparation for implementing lockless slab shrink, use new APIs to dynamically allocate the s_shrink, so that it can be freed asynchronously via RCU. Then it doesn't need to wait for RCU read-side critical section when releasing the struct super_block. Link: https://lkml.kernel.org/r/20230911094444.68966-39-zhengqi.arch@bytedance.com Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com> Reviewed-by: Muchun Song <songmuchun@bytedance.com> Acked-by: David Sterba <dsterba@suse.com> Cc: Chris Mason <clm@fb.com> Cc: Josef Bacik <josef@toxicpanda.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Christian Brauner <brauner@kernel.org> Cc: Abhinav Kumar <quic_abhinavk@quicinc.com> Cc: Alasdair Kergon <agk@redhat.com> Cc: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com> Cc: Andreas Dilger <adilger.kernel@dilger.ca> Cc: Andreas Gruenbacher <agruenba@redhat.com> Cc: Anna Schumaker <anna@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Bob Peterson <rpeterso@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Carlos Llamas <cmllamas@google.com> Cc: Chandan Babu R <chandan.babu@oracle.com> Cc: Chao Yu <chao@kernel.org> Cc: Christian Koenig <christian.koenig@amd.com> Cc: Chuck Lever <cel@kernel.org> Cc: Coly Li <colyli@suse.de> Cc: Dai Ngo <Dai.Ngo@oracle.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: "Darrick J. Wong" <djwong@kernel.org> Cc: Dave Chinner <david@fromorbit.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David Airlie <airlied@gmail.com> Cc: David Hildenbrand <david@redhat.com> Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Cc: Gao Xiang <hsiangkao@linux.alibaba.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Huang Rui <ray.huang@amd.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jaegeuk Kim <jaegeuk@kernel.org> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Jan Kara <jack@suse.cz> Cc: Jason Wang <jasowang@redhat.com> Cc: Jeff Layton <jlayton@kernel.org> Cc: Jeffle Xu <jefflexu@linux.alibaba.com> Cc: Joel Fernandes (Google) <joel@joelfernandes.org> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Juergen Gross <jgross@suse.com> Cc: Kent Overstreet <kent.overstreet@gmail.com> Cc: Kirill Tkhai <tkhai@ya.ru> Cc: Marijn Suijten <marijn.suijten@somainline.org> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Mike Snitzer <snitzer@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Muchun Song <muchun.song@linux.dev> Cc: Nadav Amit <namit@vmware.com> Cc: Neil Brown <neilb@suse.de> Cc: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com> Cc: Olga Kornievskaia <kolga@netapp.com> Cc: Paul E. McKenney <paulmck@kernel.org> Cc: Richard Weinberger <richard@nod.at> Cc: Rob Clark <robdclark@gmail.com> Cc: Rob Herring <robh@kernel.org> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: Sean Paul <sean@poorly.run> Cc: Sergey Senozhatsky <senozhatsky@chromium.org> Cc: Song Liu <song@kernel.org> Cc: Stefano Stabellini <sstabellini@kernel.org> Cc: Steven Price <steven.price@arm.com> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com> Cc: Tom Talpey <tom@talpey.com> Cc: Trond Myklebust <trond.myklebust@hammerspace.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Cc: Yue Hu <huyue2@coolpad.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-09-11 09:44:37 +00:00
shrinker_free(s->s_shrink);
/* no delays needed */
destroy_super_work(&s->destroy_work);
fs: Improve filesystem freezing handling vfs_check_frozen() tests are racy since the filesystem can be frozen just after the test is performed. Thus in write paths we can end up marking some pages or inodes dirty even though the file system is already frozen. This creates problems with flusher thread hanging on frozen filesystem. Another problem is that exclusion between ->page_mkwrite() and filesystem freezing has been handled by setting page dirty and then verifying s_frozen. This guaranteed that either the freezing code sees the faulted page, writes it, and writeprotects it again or we see s_frozen set and bail out of page fault. This works to protect from page being marked writeable while filesystem freezing is running but has an unpleasant artefact of leaving dirty (although unmodified and writeprotected) pages on frozen filesystem resulting in similar problems with flusher thread as the first problem. This patch aims at providing exclusion between write paths and filesystem freezing. We implement a writer-freeze read-write semaphore in the superblock. Actually, there are three such semaphores because of lock ranking reasons - one for page fault handlers (->page_mkwrite), one for all other writers, and one of internal filesystem purposes (used e.g. to track running transactions). Write paths which should block freezing (e.g. directory operations, ->aio_write(), ->page_mkwrite) hold reader side of the semaphore. Code freezing the filesystem takes the writer side. Only that we don't really want to bounce cachelines of the semaphores between CPUs for each write happening. So we implement the reader side of the semaphore as a per-cpu counter and the writer side is implemented using s_writers.frozen superblock field. [AV: microoptimize sb_start_write(); we want it fast in normal case] BugLink: https://bugs.launchpad.net/bugs/897421 Tested-by: Kamal Mostafa <kamal@canonical.com> Tested-by: Peter M. Petrakis <peter.petrakis@canonical.com> Tested-by: Dann Frazier <dann.frazier@canonical.com> Tested-by: Massimo Morana <massimo.morana@canonical.com> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-06-12 14:20:34 +00:00
}
/**
* alloc_super - create new superblock
* @type: filesystem type superblock should belong to
* @flags: the mount flags
fs: Add user namespace member to struct super_block Start marking filesystems with a user namespace owner, s_user_ns. In this change this is only used for permission checks of who may mount a filesystem. Ultimately s_user_ns will be used for translating ids and checking capabilities for filesystems mounted from user namespaces. The default policy for setting s_user_ns is implemented in sget(), which arranges for s_user_ns to be set to current_user_ns() and to ensure that the mounter of the filesystem has CAP_SYS_ADMIN in that user_ns. The guts of sget are split out into another function sget_userns(). The function sget_userns calls alloc_super with the specified user namespace or it verifies the existing superblock that was found has the expected user namespace, and fails with EBUSY when it is not. This failing prevents users with the wrong privileges mounting a filesystem. The reason for the split of sget_userns from sget is that in some cases such as mount_ns and kernfs_mount_ns a different policy for permission checking of mounts and setting s_user_ns is necessary, and the existence of sget_userns() allows those policies to be implemented. The helper mount_ns is expected to be used for filesystems such as proc and mqueuefs which present per namespace information. The function mount_ns is modified to call sget_userns instead of sget to ensure the user namespace owner of the namespace whose information is presented by the filesystem is used on the superblock. For sysfs and cgroup the appropriate permission checks are already in place, and kernfs_mount_ns is modified to call sget_userns so that the init_user_ns is the only user namespace used. For the cgroup filesystem cgroup namespace mounts are bind mounts of a subset of the full cgroup filesystem and as such s_user_ns must be the same for all of them as there is only a single superblock. Mounts of sysfs that vary based on the network namespace could in principle change s_user_ns but it keeps the analysis and implementation of kernfs simpler if that is not supported, and at present there appear to be no benefits from supporting a different s_user_ns on any sysfs mount. Getting the details of setting s_user_ns correct has been a long process. Thanks to Pavel Tikhorirorv who spotted a leak in sget_userns. Thanks to Seth Forshee who has kept the work alive. Thanks-to: Seth Forshee <seth.forshee@canonical.com> Thanks-to: Pavel Tikhomirov <ptikhomirov@virtuozzo.com> Acked-by: Seth Forshee <seth.forshee@canonical.com> Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2016-05-24 14:29:01 +00:00
* @user_ns: User namespace for the super_block
*
* Allocates and initializes a new &struct super_block. alloc_super()
* returns a pointer new superblock or %NULL if allocation had failed.
*/
fs: Add user namespace member to struct super_block Start marking filesystems with a user namespace owner, s_user_ns. In this change this is only used for permission checks of who may mount a filesystem. Ultimately s_user_ns will be used for translating ids and checking capabilities for filesystems mounted from user namespaces. The default policy for setting s_user_ns is implemented in sget(), which arranges for s_user_ns to be set to current_user_ns() and to ensure that the mounter of the filesystem has CAP_SYS_ADMIN in that user_ns. The guts of sget are split out into another function sget_userns(). The function sget_userns calls alloc_super with the specified user namespace or it verifies the existing superblock that was found has the expected user namespace, and fails with EBUSY when it is not. This failing prevents users with the wrong privileges mounting a filesystem. The reason for the split of sget_userns from sget is that in some cases such as mount_ns and kernfs_mount_ns a different policy for permission checking of mounts and setting s_user_ns is necessary, and the existence of sget_userns() allows those policies to be implemented. The helper mount_ns is expected to be used for filesystems such as proc and mqueuefs which present per namespace information. The function mount_ns is modified to call sget_userns instead of sget to ensure the user namespace owner of the namespace whose information is presented by the filesystem is used on the superblock. For sysfs and cgroup the appropriate permission checks are already in place, and kernfs_mount_ns is modified to call sget_userns so that the init_user_ns is the only user namespace used. For the cgroup filesystem cgroup namespace mounts are bind mounts of a subset of the full cgroup filesystem and as such s_user_ns must be the same for all of them as there is only a single superblock. Mounts of sysfs that vary based on the network namespace could in principle change s_user_ns but it keeps the analysis and implementation of kernfs simpler if that is not supported, and at present there appear to be no benefits from supporting a different s_user_ns on any sysfs mount. Getting the details of setting s_user_ns correct has been a long process. Thanks to Pavel Tikhorirorv who spotted a leak in sget_userns. Thanks to Seth Forshee who has kept the work alive. Thanks-to: Seth Forshee <seth.forshee@canonical.com> Thanks-to: Pavel Tikhomirov <ptikhomirov@virtuozzo.com> Acked-by: Seth Forshee <seth.forshee@canonical.com> Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2016-05-24 14:29:01 +00:00
static struct super_block *alloc_super(struct file_system_type *type, int flags,
struct user_namespace *user_ns)
{
struct super_block *s = kzalloc(sizeof(struct super_block), GFP_USER);
static const struct super_operations default_op;
int i;
if (!s)
return NULL;
INIT_LIST_HEAD(&s->s_mounts);
fs: Add user namespace member to struct super_block Start marking filesystems with a user namespace owner, s_user_ns. In this change this is only used for permission checks of who may mount a filesystem. Ultimately s_user_ns will be used for translating ids and checking capabilities for filesystems mounted from user namespaces. The default policy for setting s_user_ns is implemented in sget(), which arranges for s_user_ns to be set to current_user_ns() and to ensure that the mounter of the filesystem has CAP_SYS_ADMIN in that user_ns. The guts of sget are split out into another function sget_userns(). The function sget_userns calls alloc_super with the specified user namespace or it verifies the existing superblock that was found has the expected user namespace, and fails with EBUSY when it is not. This failing prevents users with the wrong privileges mounting a filesystem. The reason for the split of sget_userns from sget is that in some cases such as mount_ns and kernfs_mount_ns a different policy for permission checking of mounts and setting s_user_ns is necessary, and the existence of sget_userns() allows those policies to be implemented. The helper mount_ns is expected to be used for filesystems such as proc and mqueuefs which present per namespace information. The function mount_ns is modified to call sget_userns instead of sget to ensure the user namespace owner of the namespace whose information is presented by the filesystem is used on the superblock. For sysfs and cgroup the appropriate permission checks are already in place, and kernfs_mount_ns is modified to call sget_userns so that the init_user_ns is the only user namespace used. For the cgroup filesystem cgroup namespace mounts are bind mounts of a subset of the full cgroup filesystem and as such s_user_ns must be the same for all of them as there is only a single superblock. Mounts of sysfs that vary based on the network namespace could in principle change s_user_ns but it keeps the analysis and implementation of kernfs simpler if that is not supported, and at present there appear to be no benefits from supporting a different s_user_ns on any sysfs mount. Getting the details of setting s_user_ns correct has been a long process. Thanks to Pavel Tikhorirorv who spotted a leak in sget_userns. Thanks to Seth Forshee who has kept the work alive. Thanks-to: Seth Forshee <seth.forshee@canonical.com> Thanks-to: Pavel Tikhomirov <ptikhomirov@virtuozzo.com> Acked-by: Seth Forshee <seth.forshee@canonical.com> Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2016-05-24 14:29:01 +00:00
s->s_user_ns = get_user_ns(user_ns);
init_rwsem(&s->s_umount);
lockdep_set_class(&s->s_umount, &type->s_umount_key);
/*
* sget() can have s_umount recursion.
*
* When it cannot find a suitable sb, it allocates a new
* one (this one), and tries again to find a suitable old
* one.
*
* In case that succeeds, it will acquire the s_umount
* lock of the old one. Since these are clearly distrinct
* locks, and this object isn't exposed yet, there's no
* risk of deadlocks.
*
* Annotate this by putting this lock in a different
* subclass.
*/
down_write_nested(&s->s_umount, SINGLE_DEPTH_NESTING);
if (security_sb_alloc(s))
goto fail;
for (i = 0; i < SB_FREEZE_LEVELS; i++) {
change sb_writers to use percpu_rw_semaphore We can remove everything from struct sb_writers except frozen and add the array of percpu_rw_semaphore's instead. This patch doesn't remove sb_writers->wait_unfrozen yet, we keep it for get_super_thawed(). We will probably remove it later. This change tries to address the following problems: - Firstly, __sb_start_write() looks simply buggy. It does __sb_end_write() if it sees ->frozen, but if it migrates to another CPU before percpu_counter_dec(), sb_wait_write() can wrongly succeed if there is another task which holds the same "semaphore": sb_wait_write() can miss the result of the previous percpu_counter_inc() but see the result of this percpu_counter_dec(). - As Dave Hansen reports, it is suboptimal. The trivial microbenchmark that writes to a tmpfs file in a loop runs 12% faster if we change this code to rely on RCU and kill the memory barriers. - This code doesn't look simple. It would be better to rely on the generic locking code. According to Dave, this change adds the same performance improvement. Note: with this change both freeze_super() and thaw_super() will do synchronize_sched_expedited() 3 times. This is just ugly. But: - This will be "fixed" by the rcu_sync changes we are going to merge. After that freeze_super()->percpu_down_write() will use synchronize_sched(), and thaw_super() won't use synchronize() at all. This doesn't need any changes in fs/super.c. - Once we merge rcu_sync changes, we can also change super.c so that all wb_write->rw_sem's will share the single ->rss in struct sb_writes, then freeze_super() will need only one synchronize_sched(). Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Jan Kara <jack@suse.com>
2015-08-11 15:05:04 +00:00
if (__percpu_init_rwsem(&s->s_writers.rw_sem[i],
sb_writers_name[i],
&type->s_writers_key[i]))
goto fail;
}
s->s_bdi = &noop_backing_dev_info;
s->s_flags = flags;
if (s->s_user_ns != &init_user_ns)
s->s_iflags |= SB_I_NODEV;
INIT_HLIST_NODE(&s->s_instances);
VFS: don't keep disconnected dentries on d_anon The original purpose of the per-superblock d_anon list was to keep disconnected dentries in the cache between consecutive requests to the NFS server. Dentries can be disconnected if a client holds a file open and repeatedly performs IO on it, and if the server drops the dentry, whether due to memory pressure, server restart, or "echo 3 > /proc/sys/vm/drop_caches". This purpose was thwarted by commit 75a6f82a0d10 ("freeing unlinked file indefinitely delayed") which caused disconnected dentries to be freed as soon as their refcount reached zero. This means that, when a dentry being used by nfsd gets disconnected, a new one needs to be allocated for every request (unless requests overlap). As the dentry has no name, no parent, and no children, there is little of value to cache. As small memory allocations are typically fast (from per-cpu free lists) this likely has little cost. This means that the original purpose of s_anon is no longer relevant: there is no longer any need to keep disconnected dentries on a list so they appear to be hashed. However, s_anon now has a new use. When you mount an NFS filesystem, the dentry stored in s_root is just a placebo. The "real" root dentry is allocated using d_obtain_root() and so it kept on the s_anon list. I don't know the reason for this, but suspect it related to NFSv4 where a mount of "server:/some/path" require NFS to look up the root filehandle on the server, then walk down "/some" and "/path" to get the filehandle to mount. Whatever the reason, NFS depends on the s_anon list and on shrink_dcache_for_umount() pruning all dentries on this list. So we cannot simply remove s_anon. We could just leave the code unchanged, but apart from that being potentially confusing, the (unfair) bit-spin-lock which protects s_anon can become a bottle neck when lots of disconnected dentries are being created. So this patch renames s_anon to s_roots, and stops storing disconnected dentries on the list. Only dentries obtained with d_obtain_root() are now stored on this list. There are many fewer of these (only NFS and NILFS2 use the call, and only during filesystem mount) so contention on the bit-lock will not be a problem. Possibly an alternate solution should be found for NFS and NILFS2, but that would require understanding their needs first. Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-12-20 22:45:40 +00:00
INIT_HLIST_BL_HEAD(&s->s_roots);
mutex_init(&s->s_sync_lock);
INIT_LIST_HEAD(&s->s_inodes);
spin_lock_init(&s->s_inode_list_lock);
fs/fs-writeback.c: add a new writeback list for sync wait_sb_inodes() currently does a walk of all inodes in the filesystem to find dirty one to wait on during sync. This is highly inefficient and wastes a lot of CPU when there are lots of clean cached inodes that we don't need to wait on. To avoid this "all inode" walk, we need to track inodes that are currently under writeback that we need to wait for. We do this by adding inodes to a writeback list on the sb when the mapping is first tagged as having pages under writeback. wait_sb_inodes() can then walk this list of "inodes under IO" and wait specifically just for the inodes that the current sync(2) needs to wait for. Define a couple helpers to add/remove an inode from the writeback list and call them when the overall mapping is tagged for or cleared from writeback. Update wait_sb_inodes() to walk only the inodes under writeback due to the sync. With this change, filesystem sync times are significantly reduced for fs' with largely populated inode caches and otherwise no other work to do. For example, on a 16xcpu 2GHz x86-64 server, 10TB XFS filesystem with a ~10m entry inode cache, sync times are reduced from ~7.3s to less than 0.1s when the filesystem is fully clean. Link: http://lkml.kernel.org/r/1466594593-6757-2-git-send-email-bfoster@redhat.com Signed-off-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Jan Kara <jack@suse.cz> Tested-by: Holger Hoffstätte <holger.hoffstaette@applied-asynchrony.com> Cc: Al Viro <viro@ZenIV.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-26 22:21:50 +00:00
INIT_LIST_HEAD(&s->s_inodes_wb);
spin_lock_init(&s->s_inode_wblist_lock);
s->s_count = 1;
atomic_set(&s->s_active, 1);
mutex_init(&s->s_vfs_rename_mutex);
lockdep_set_class(&s->s_vfs_rename_mutex, &type->s_vfs_rename_key);
init_rwsem(&s->s_dquot.dqio_sem);
s->s_maxbytes = MAX_NON_LFS;
s->s_op = &default_op;
s->s_time_gran = 1000000000;
s->s_time_min = TIME64_MIN;
s->s_time_max = TIME64_MAX;
fs: super: dynamically allocate the s_shrink In preparation for implementing lockless slab shrink, use new APIs to dynamically allocate the s_shrink, so that it can be freed asynchronously via RCU. Then it doesn't need to wait for RCU read-side critical section when releasing the struct super_block. Link: https://lkml.kernel.org/r/20230911094444.68966-39-zhengqi.arch@bytedance.com Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com> Reviewed-by: Muchun Song <songmuchun@bytedance.com> Acked-by: David Sterba <dsterba@suse.com> Cc: Chris Mason <clm@fb.com> Cc: Josef Bacik <josef@toxicpanda.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Christian Brauner <brauner@kernel.org> Cc: Abhinav Kumar <quic_abhinavk@quicinc.com> Cc: Alasdair Kergon <agk@redhat.com> Cc: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com> Cc: Andreas Dilger <adilger.kernel@dilger.ca> Cc: Andreas Gruenbacher <agruenba@redhat.com> Cc: Anna Schumaker <anna@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Bob Peterson <rpeterso@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Carlos Llamas <cmllamas@google.com> Cc: Chandan Babu R <chandan.babu@oracle.com> Cc: Chao Yu <chao@kernel.org> Cc: Christian Koenig <christian.koenig@amd.com> Cc: Chuck Lever <cel@kernel.org> Cc: Coly Li <colyli@suse.de> Cc: Dai Ngo <Dai.Ngo@oracle.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: "Darrick J. Wong" <djwong@kernel.org> Cc: Dave Chinner <david@fromorbit.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David Airlie <airlied@gmail.com> Cc: David Hildenbrand <david@redhat.com> Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Cc: Gao Xiang <hsiangkao@linux.alibaba.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Huang Rui <ray.huang@amd.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jaegeuk Kim <jaegeuk@kernel.org> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Jan Kara <jack@suse.cz> Cc: Jason Wang <jasowang@redhat.com> Cc: Jeff Layton <jlayton@kernel.org> Cc: Jeffle Xu <jefflexu@linux.alibaba.com> Cc: Joel Fernandes (Google) <joel@joelfernandes.org> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Juergen Gross <jgross@suse.com> Cc: Kent Overstreet <kent.overstreet@gmail.com> Cc: Kirill Tkhai <tkhai@ya.ru> Cc: Marijn Suijten <marijn.suijten@somainline.org> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Mike Snitzer <snitzer@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Muchun Song <muchun.song@linux.dev> Cc: Nadav Amit <namit@vmware.com> Cc: Neil Brown <neilb@suse.de> Cc: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com> Cc: Olga Kornievskaia <kolga@netapp.com> Cc: Paul E. McKenney <paulmck@kernel.org> Cc: Richard Weinberger <richard@nod.at> Cc: Rob Clark <robdclark@gmail.com> Cc: Rob Herring <robh@kernel.org> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: Sean Paul <sean@poorly.run> Cc: Sergey Senozhatsky <senozhatsky@chromium.org> Cc: Song Liu <song@kernel.org> Cc: Stefano Stabellini <sstabellini@kernel.org> Cc: Steven Price <steven.price@arm.com> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com> Cc: Tom Talpey <tom@talpey.com> Cc: Trond Myklebust <trond.myklebust@hammerspace.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Cc: Yue Hu <huyue2@coolpad.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-09-11 09:44:37 +00:00
s->s_shrink = shrinker_alloc(SHRINKER_NUMA_AWARE | SHRINKER_MEMCG_AWARE,
"sb-%s", type->name);
if (!s->s_shrink)
goto fail;
fs: super: dynamically allocate the s_shrink In preparation for implementing lockless slab shrink, use new APIs to dynamically allocate the s_shrink, so that it can be freed asynchronously via RCU. Then it doesn't need to wait for RCU read-side critical section when releasing the struct super_block. Link: https://lkml.kernel.org/r/20230911094444.68966-39-zhengqi.arch@bytedance.com Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com> Reviewed-by: Muchun Song <songmuchun@bytedance.com> Acked-by: David Sterba <dsterba@suse.com> Cc: Chris Mason <clm@fb.com> Cc: Josef Bacik <josef@toxicpanda.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Christian Brauner <brauner@kernel.org> Cc: Abhinav Kumar <quic_abhinavk@quicinc.com> Cc: Alasdair Kergon <agk@redhat.com> Cc: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com> Cc: Andreas Dilger <adilger.kernel@dilger.ca> Cc: Andreas Gruenbacher <agruenba@redhat.com> Cc: Anna Schumaker <anna@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Bob Peterson <rpeterso@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Carlos Llamas <cmllamas@google.com> Cc: Chandan Babu R <chandan.babu@oracle.com> Cc: Chao Yu <chao@kernel.org> Cc: Christian Koenig <christian.koenig@amd.com> Cc: Chuck Lever <cel@kernel.org> Cc: Coly Li <colyli@suse.de> Cc: Dai Ngo <Dai.Ngo@oracle.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: "Darrick J. Wong" <djwong@kernel.org> Cc: Dave Chinner <david@fromorbit.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David Airlie <airlied@gmail.com> Cc: David Hildenbrand <david@redhat.com> Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Cc: Gao Xiang <hsiangkao@linux.alibaba.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Huang Rui <ray.huang@amd.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jaegeuk Kim <jaegeuk@kernel.org> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Jan Kara <jack@suse.cz> Cc: Jason Wang <jasowang@redhat.com> Cc: Jeff Layton <jlayton@kernel.org> Cc: Jeffle Xu <jefflexu@linux.alibaba.com> Cc: Joel Fernandes (Google) <joel@joelfernandes.org> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Juergen Gross <jgross@suse.com> Cc: Kent Overstreet <kent.overstreet@gmail.com> Cc: Kirill Tkhai <tkhai@ya.ru> Cc: Marijn Suijten <marijn.suijten@somainline.org> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Mike Snitzer <snitzer@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Muchun Song <muchun.song@linux.dev> Cc: Nadav Amit <namit@vmware.com> Cc: Neil Brown <neilb@suse.de> Cc: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com> Cc: Olga Kornievskaia <kolga@netapp.com> Cc: Paul E. McKenney <paulmck@kernel.org> Cc: Richard Weinberger <richard@nod.at> Cc: Rob Clark <robdclark@gmail.com> Cc: Rob Herring <robh@kernel.org> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: Sean Paul <sean@poorly.run> Cc: Sergey Senozhatsky <senozhatsky@chromium.org> Cc: Song Liu <song@kernel.org> Cc: Stefano Stabellini <sstabellini@kernel.org> Cc: Steven Price <steven.price@arm.com> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com> Cc: Tom Talpey <tom@talpey.com> Cc: Trond Myklebust <trond.myklebust@hammerspace.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Cc: Yue Hu <huyue2@coolpad.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-09-11 09:44:37 +00:00
s->s_shrink->scan_objects = super_cache_scan;
s->s_shrink->count_objects = super_cache_count;
s->s_shrink->batch = 1024;
s->s_shrink->private_data = s;
if (list_lru_init_memcg(&s->s_dentry_lru, s->s_shrink))
goto fail;
fs: super: dynamically allocate the s_shrink In preparation for implementing lockless slab shrink, use new APIs to dynamically allocate the s_shrink, so that it can be freed asynchronously via RCU. Then it doesn't need to wait for RCU read-side critical section when releasing the struct super_block. Link: https://lkml.kernel.org/r/20230911094444.68966-39-zhengqi.arch@bytedance.com Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com> Reviewed-by: Muchun Song <songmuchun@bytedance.com> Acked-by: David Sterba <dsterba@suse.com> Cc: Chris Mason <clm@fb.com> Cc: Josef Bacik <josef@toxicpanda.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Christian Brauner <brauner@kernel.org> Cc: Abhinav Kumar <quic_abhinavk@quicinc.com> Cc: Alasdair Kergon <agk@redhat.com> Cc: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com> Cc: Andreas Dilger <adilger.kernel@dilger.ca> Cc: Andreas Gruenbacher <agruenba@redhat.com> Cc: Anna Schumaker <anna@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Bob Peterson <rpeterso@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Carlos Llamas <cmllamas@google.com> Cc: Chandan Babu R <chandan.babu@oracle.com> Cc: Chao Yu <chao@kernel.org> Cc: Christian Koenig <christian.koenig@amd.com> Cc: Chuck Lever <cel@kernel.org> Cc: Coly Li <colyli@suse.de> Cc: Dai Ngo <Dai.Ngo@oracle.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: "Darrick J. Wong" <djwong@kernel.org> Cc: Dave Chinner <david@fromorbit.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David Airlie <airlied@gmail.com> Cc: David Hildenbrand <david@redhat.com> Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Cc: Gao Xiang <hsiangkao@linux.alibaba.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Huang Rui <ray.huang@amd.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jaegeuk Kim <jaegeuk@kernel.org> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Jan Kara <jack@suse.cz> Cc: Jason Wang <jasowang@redhat.com> Cc: Jeff Layton <jlayton@kernel.org> Cc: Jeffle Xu <jefflexu@linux.alibaba.com> Cc: Joel Fernandes (Google) <joel@joelfernandes.org> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Juergen Gross <jgross@suse.com> Cc: Kent Overstreet <kent.overstreet@gmail.com> Cc: Kirill Tkhai <tkhai@ya.ru> Cc: Marijn Suijten <marijn.suijten@somainline.org> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Mike Snitzer <snitzer@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Muchun Song <muchun.song@linux.dev> Cc: Nadav Amit <namit@vmware.com> Cc: Neil Brown <neilb@suse.de> Cc: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com> Cc: Olga Kornievskaia <kolga@netapp.com> Cc: Paul E. McKenney <paulmck@kernel.org> Cc: Richard Weinberger <richard@nod.at> Cc: Rob Clark <robdclark@gmail.com> Cc: Rob Herring <robh@kernel.org> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: Sean Paul <sean@poorly.run> Cc: Sergey Senozhatsky <senozhatsky@chromium.org> Cc: Song Liu <song@kernel.org> Cc: Stefano Stabellini <sstabellini@kernel.org> Cc: Steven Price <steven.price@arm.com> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com> Cc: Tom Talpey <tom@talpey.com> Cc: Trond Myklebust <trond.myklebust@hammerspace.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Cc: Yue Hu <huyue2@coolpad.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-09-11 09:44:37 +00:00
if (list_lru_init_memcg(&s->s_inode_lru, s->s_shrink))
goto fail;
return s;
list_lru: dynamically adjust node arrays We currently use a compile-time constant to size the node array for the list_lru structure. Due to this, we don't need to allocate any memory at initialization time. But as a consequence, the structures that contain embedded list_lru lists can become way too big (the superblock for instance contains two of them). This patch aims at ameliorating this situation by dynamically allocating the node arrays with the firmware provided nr_node_ids. Signed-off-by: Glauber Costa <glommer@openvz.org> Cc: Dave Chinner <dchinner@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Cc: Arve Hjønnevåg <arve@android.com> Cc: Carlos Maiolino <cmaiolino@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Chuck Lever <chuck.lever@oracle.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: David Rientjes <rientjes@google.com> Cc: Gleb Natapov <gleb@redhat.com> Cc: Greg Thelen <gthelen@google.com> Cc: J. Bruce Fields <bfields@redhat.com> Cc: Jan Kara <jack@suse.cz> Cc: Jerome Glisse <jglisse@redhat.com> Cc: John Stultz <john.stultz@linaro.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Kent Overstreet <koverstreet@google.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Thomas Hellstrom <thellstrom@vmware.com> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-08-28 00:18:18 +00:00
fail:
destroy_unused_super(s);
return NULL;
}
/* Superblock refcounting */
/*
* Drop a superblock's refcount. The caller must hold sb_lock.
*/
static void __put_super(struct super_block *s)
{
if (!--s->s_count) {
list_del_init(&s->s_list);
WARN_ON(s->s_dentry_lru.node);
WARN_ON(s->s_inode_lru.node);
WARN_ON(!list_empty(&s->s_mounts));
security_sb_free(s);
put_user_ns(s->s_user_ns);
kfree(s->s_subtype);
call_rcu(&s->rcu, destroy_super_rcu);
}
}
/**
* put_super - drop a temporary reference to superblock
* @sb: superblock in question
*
* Drops a temporary reference, frees superblock if there's no
* references left.
*/
void put_super(struct super_block *sb)
{
spin_lock(&sb_lock);
__put_super(sb);
spin_unlock(&sb_lock);
}
super: ensure valid info For keyed filesystems that recycle superblocks based on s_fs_info or information contained therein s_fs_info must be kept as long as the superblock is on the filesystem type super list. This isn't guaranteed as s_fs_info will be freed latest in sb->kill_sb(). The fix is simply to perform notification and list removal in kill_anon_super(). Any filesystem needs to free s_fs_info after they call the kill_*() helpers. If they don't they risk use-after-free right now so fixing it here is guaranteed that s_fs_info remain valid. For block backed filesystems notifying in pass sb->kill_sb() in deactivate_locked_super() remains unproblematic and is required because multiple other block devices can be shut down after kill_block_super() has been called from a filesystem's sb->kill_sb() handler. For example, ext4 and xfs close additional devices. Block based filesystems don't depend on s_fs_info (btrfs does use s_fs_info but also uses kill_anon_super() and not kill_block_super().). Sorry for that braino. Goal should be to unify this behavior during this cycle obviously. But let's please do a simple bugfix now. Fixes: 2c18a63b760a ("super: wait until we passed kill super") Fixes: syzbot+5b64180f8d9e39d3f061@syzkaller.appspotmail.com Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Christoph Hellwig <hch@lst.de> Reported-by: syzbot+5b64180f8d9e39d3f061@syzkaller.appspotmail.com Message-Id: <20230828-vfs-super-fixes-v1-2-b37a4a04a88f@kernel.org> Signed-off-by: Christian Brauner <brauner@kernel.org>
2023-08-28 11:26:24 +00:00
static void kill_super_notify(struct super_block *sb)
{
lockdep_assert_not_held(&sb->s_umount);
/* already notified earlier */
if (sb->s_flags & SB_DEAD)
return;
/*
* Remove it from @fs_supers so it isn't found by new
* sget{_fc}() walkers anymore. Any concurrent mounter still
* managing to grab a temporary reference is guaranteed to
* already see SB_DYING and will wait until we notify them about
* SB_DEAD.
*/
spin_lock(&sb_lock);
hlist_del_init(&sb->s_instances);
spin_unlock(&sb_lock);
/*
* Let concurrent mounts know that this thing is really dead.
* We don't need @sb->s_umount here as every concurrent caller
* will see SB_DYING and either discard the superblock or wait
* for SB_DEAD.
*/
super_wake(sb, SB_DEAD);
}
/**
* deactivate_locked_super - drop an active reference to superblock
* @s: superblock to deactivate
*
* Drops an active reference to superblock, converting it into a temporary
* one if there is no other active references left. In that case we
* tell fs driver to shut it down and drop the temporary reference we
* had just acquired.
*
* Caller holds exclusive lock on superblock; that lock is released.
*/
void deactivate_locked_super(struct super_block *s)
{
struct file_system_type *fs = s->s_type;
if (atomic_dec_and_test(&s->s_active)) {
fs: super: dynamically allocate the s_shrink In preparation for implementing lockless slab shrink, use new APIs to dynamically allocate the s_shrink, so that it can be freed asynchronously via RCU. Then it doesn't need to wait for RCU read-side critical section when releasing the struct super_block. Link: https://lkml.kernel.org/r/20230911094444.68966-39-zhengqi.arch@bytedance.com Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com> Reviewed-by: Muchun Song <songmuchun@bytedance.com> Acked-by: David Sterba <dsterba@suse.com> Cc: Chris Mason <clm@fb.com> Cc: Josef Bacik <josef@toxicpanda.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Christian Brauner <brauner@kernel.org> Cc: Abhinav Kumar <quic_abhinavk@quicinc.com> Cc: Alasdair Kergon <agk@redhat.com> Cc: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com> Cc: Andreas Dilger <adilger.kernel@dilger.ca> Cc: Andreas Gruenbacher <agruenba@redhat.com> Cc: Anna Schumaker <anna@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Bob Peterson <rpeterso@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Carlos Llamas <cmllamas@google.com> Cc: Chandan Babu R <chandan.babu@oracle.com> Cc: Chao Yu <chao@kernel.org> Cc: Christian Koenig <christian.koenig@amd.com> Cc: Chuck Lever <cel@kernel.org> Cc: Coly Li <colyli@suse.de> Cc: Dai Ngo <Dai.Ngo@oracle.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: "Darrick J. Wong" <djwong@kernel.org> Cc: Dave Chinner <david@fromorbit.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David Airlie <airlied@gmail.com> Cc: David Hildenbrand <david@redhat.com> Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Cc: Gao Xiang <hsiangkao@linux.alibaba.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Huang Rui <ray.huang@amd.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jaegeuk Kim <jaegeuk@kernel.org> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Jan Kara <jack@suse.cz> Cc: Jason Wang <jasowang@redhat.com> Cc: Jeff Layton <jlayton@kernel.org> Cc: Jeffle Xu <jefflexu@linux.alibaba.com> Cc: Joel Fernandes (Google) <joel@joelfernandes.org> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Juergen Gross <jgross@suse.com> Cc: Kent Overstreet <kent.overstreet@gmail.com> Cc: Kirill Tkhai <tkhai@ya.ru> Cc: Marijn Suijten <marijn.suijten@somainline.org> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Mike Snitzer <snitzer@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Muchun Song <muchun.song@linux.dev> Cc: Nadav Amit <namit@vmware.com> Cc: Neil Brown <neilb@suse.de> Cc: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com> Cc: Olga Kornievskaia <kolga@netapp.com> Cc: Paul E. McKenney <paulmck@kernel.org> Cc: Richard Weinberger <richard@nod.at> Cc: Rob Clark <robdclark@gmail.com> Cc: Rob Herring <robh@kernel.org> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: Sean Paul <sean@poorly.run> Cc: Sergey Senozhatsky <senozhatsky@chromium.org> Cc: Song Liu <song@kernel.org> Cc: Stefano Stabellini <sstabellini@kernel.org> Cc: Steven Price <steven.price@arm.com> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com> Cc: Tom Talpey <tom@talpey.com> Cc: Trond Myklebust <trond.myklebust@hammerspace.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Cc: Yue Hu <huyue2@coolpad.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-09-11 09:44:37 +00:00
shrinker_free(s->s_shrink);
fs/superblock: unregister sb shrinker before ->kill_sb() This series is aimed at regressions noticed during reclaim activity. The first two patches are shrinker patches that were posted ages ago but never merged for reasons that are unclear to me. I'm posting them again to see if there was a reason they were dropped or if they just got lost. Dave? Time? The last patch adjusts proportional reclaim. Yuanhan Liu, can you retest the vm scalability test cases on a larger machine? Hugh, does this work for you on the memcg test cases? Based on ext4, I get the following results but unfortunately my larger test machines are all unavailable so this is based on a relatively small machine. postmark 3.15.0-rc5 3.15.0-rc5 vanilla proportion-v1r4 Ops/sec Transactions 21.00 ( 0.00%) 25.00 ( 19.05%) Ops/sec FilesCreate 39.00 ( 0.00%) 45.00 ( 15.38%) Ops/sec CreateTransact 10.00 ( 0.00%) 12.00 ( 20.00%) Ops/sec FilesDeleted 6202.00 ( 0.00%) 6202.00 ( 0.00%) Ops/sec DeleteTransact 11.00 ( 0.00%) 12.00 ( 9.09%) Ops/sec DataRead/MB 25.97 ( 0.00%) 30.02 ( 15.59%) Ops/sec DataWrite/MB 49.99 ( 0.00%) 57.78 ( 15.58%) ffsb (mail server simulator) 3.15.0-rc5 3.15.0-rc5 vanilla proportion-v1r4 Ops/sec readall 9402.63 ( 0.00%) 9805.74 ( 4.29%) Ops/sec create 4695.45 ( 0.00%) 4781.39 ( 1.83%) Ops/sec delete 173.72 ( 0.00%) 177.23 ( 2.02%) Ops/sec Transactions 14271.80 ( 0.00%) 14764.37 ( 3.45%) Ops/sec Read 37.00 ( 0.00%) 38.50 ( 4.05%) Ops/sec Write 18.20 ( 0.00%) 18.50 ( 1.65%) dd of a large file 3.15.0-rc5 3.15.0-rc5 vanilla proportion-v1r4 WallTime DownloadTar 75.00 ( 0.00%) 61.00 ( 18.67%) WallTime DD 423.00 ( 0.00%) 401.00 ( 5.20%) WallTime Delete 2.00 ( 0.00%) 5.00 (-150.00%) stutter (times mmap latency during large amounts of IO) 3.15.0-rc5 3.15.0-rc5 vanilla proportion-v1r4 Unit >5ms Delays 80252.0000 ( 0.00%) 81523.0000 ( -1.58%) Unit Mmap min 8.2118 ( 0.00%) 8.3206 ( -1.33%) Unit Mmap mean 17.4614 ( 0.00%) 17.2868 ( 1.00%) Unit Mmap stddev 24.9059 ( 0.00%) 34.6771 (-39.23%) Unit Mmap max 2811.6433 ( 0.00%) 2645.1398 ( 5.92%) Unit Mmap 90% 20.5098 ( 0.00%) 18.3105 ( 10.72%) Unit Mmap 93% 22.9180 ( 0.00%) 20.1751 ( 11.97%) Unit Mmap 95% 25.2114 ( 0.00%) 22.4988 ( 10.76%) Unit Mmap 99% 46.1430 ( 0.00%) 43.5952 ( 5.52%) Unit Ideal Tput 85.2623 ( 0.00%) 78.8906 ( 7.47%) Unit Tput min 44.0666 ( 0.00%) 43.9609 ( 0.24%) Unit Tput mean 45.5646 ( 0.00%) 45.2009 ( 0.80%) Unit Tput stddev 0.9318 ( 0.00%) 1.1084 (-18.95%) Unit Tput max 46.7375 ( 0.00%) 46.7539 ( -0.04%) This patch (of 3): We will like to unregister the sb shrinker before ->kill_sb(). This will allow cached objects to be counted without call to grab_super_passive() to update ref count on sb. We want to avoid locking during memory reclamation especially when we are skipping the memory reclaim when we are out of cached objects. This is safe because grab_super_passive does a try-lock on the sb->s_umount now, and so if we are in the unmount process, it won't ever block. That means what used to be a deadlock and races we were avoiding by using grab_super_passive() is now: shrinker umount down_read(shrinker_rwsem) down_write(sb->s_umount) shrinker_unregister down_write(shrinker_rwsem) <blocks> grab_super_passive(sb) down_read_trylock(sb->s_umount) <fails> <shrinker aborts> .... <shrinkers finish running> up_read(shrinker_rwsem) <unblocks> <removes shrinker> up_write(shrinker_rwsem) ->kill_sb() .... So it is safe to deregister the shrinker before ->kill_sb(). Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com> Signed-off-by: Mel Gorman <mgorman@suse.de> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Hugh Dickins <hughd@google.com> Cc: Dave Chinner <david@fromorbit.com> Tested-by: Yuanhan Liu <yuanhan.liu@linux.intel.com> Cc: Bob Liu <bob.liu@oracle.com> Cc: Jan Kara <jack@suse.cz> Acked-by: Rik van Riel <riel@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-04 23:10:46 +00:00
fs->kill_sb(s);
super: ensure valid info For keyed filesystems that recycle superblocks based on s_fs_info or information contained therein s_fs_info must be kept as long as the superblock is on the filesystem type super list. This isn't guaranteed as s_fs_info will be freed latest in sb->kill_sb(). The fix is simply to perform notification and list removal in kill_anon_super(). Any filesystem needs to free s_fs_info after they call the kill_*() helpers. If they don't they risk use-after-free right now so fixing it here is guaranteed that s_fs_info remain valid. For block backed filesystems notifying in pass sb->kill_sb() in deactivate_locked_super() remains unproblematic and is required because multiple other block devices can be shut down after kill_block_super() has been called from a filesystem's sb->kill_sb() handler. For example, ext4 and xfs close additional devices. Block based filesystems don't depend on s_fs_info (btrfs does use s_fs_info but also uses kill_anon_super() and not kill_block_super().). Sorry for that braino. Goal should be to unify this behavior during this cycle obviously. But let's please do a simple bugfix now. Fixes: 2c18a63b760a ("super: wait until we passed kill super") Fixes: syzbot+5b64180f8d9e39d3f061@syzkaller.appspotmail.com Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Christoph Hellwig <hch@lst.de> Reported-by: syzbot+5b64180f8d9e39d3f061@syzkaller.appspotmail.com Message-Id: <20230828-vfs-super-fixes-v1-2-b37a4a04a88f@kernel.org> Signed-off-by: Christian Brauner <brauner@kernel.org>
2023-08-28 11:26:24 +00:00
kill_super_notify(s);
/*
* Since list_lru_destroy() may sleep, we cannot call it from
* put_super(), where we hold the sb_lock. Therefore we destroy
* the lru lists right now.
*/
list_lru_destroy(&s->s_dentry_lru);
list_lru_destroy(&s->s_inode_lru);
put_filesystem(fs);
put_super(s);
} else {
super_unlock_excl(s);
}
}
EXPORT_SYMBOL(deactivate_locked_super);
/**
* deactivate_super - drop an active reference to superblock
* @s: superblock to deactivate
*
* Variant of deactivate_locked_super(), except that superblock is *not*
* locked by caller. If we are going to drop the final active reference,
* lock will be acquired prior to that.
*/
void deactivate_super(struct super_block *s)
{
if (!atomic_add_unless(&s->s_active, -1, 1)) {
super: wait for nascent superblocks Recent patches experiment with making it possible to allocate a new superblock before opening the relevant block device. Naturally this has intricate side-effects that we get to learn about while developing this. Superblock allocators such as sget{_fc}() return with s_umount of the new superblock held and lock ordering currently requires that block level locks such as bdev_lock and open_mutex rank above s_umount. Before aca740cecbe5 ("fs: open block device after superblock creation") ordering was guaranteed to be correct as block devices were opened prior to superblock allocation and thus s_umount wasn't held. But now s_umount must be dropped before opening block devices to avoid locking violations. This has consequences. The main one being that iterators over @super_blocks and @fs_supers that grab a temporary reference to the superblock can now also grab s_umount before the caller has managed to open block devices and called fill_super(). So whereas before such iterators or concurrent mounts would have simply slept on s_umount until SB_BORN was set or the superblock was discard due to initalization failure they can now needlessly spin through sget{_fc}(). If the caller is sleeping on bdev_lock or open_mutex one caller waiting on SB_BORN will always spin somewhere and potentially this can go on for quite a while. It should be possible to drop s_umount while allowing iterators to wait on a nascent superblock to either be born or discarded. This patch implements a wait_var_event() mechanism allowing iterators to sleep until they are woken when the superblock is born or discarded. This also allows us to avoid relooping through @fs_supers and @super_blocks if a superblock isn't yet born or dying. Link: aca740cecbe5 ("fs: open block device after superblock creation") Reviewed-by: Jan Kara <jack@suse.cz> Message-Id: <20230818-vfs-super-fixes-v3-v3-3-9f0b1876e46b@kernel.org> Signed-off-by: Christian Brauner <brauner@kernel.org>
2023-08-18 14:00:50 +00:00
__super_lock_excl(s);
deactivate_locked_super(s);
}
}
EXPORT_SYMBOL(deactivate_super);
static inline bool wait_dead(struct super_block *sb)
{
unsigned int flags;
/*
* Pairs with memory barrier in super_wake() and ensures
* that we see SB_DEAD after we're woken.
*/
flags = smp_load_acquire(&sb->s_flags);
return flags & SB_DEAD;
}
/**
* grab_super - acquire an active reference to a superblock
* @sb: superblock to acquire
*
* Acquire a temporary reference on a superblock and try to trade it for
* an active reference. This is used in sget{_fc}() to wait for a
* superblock to either become SB_BORN or for it to pass through
* sb->kill() and be marked as SB_DEAD.
*
* Return: This returns true if an active reference could be acquired,
* false if not.
*/
static bool grab_super(struct super_block *sb)
{
bool locked;
sb->s_count++;
spin_unlock(&sb_lock);
locked = super_lock_excl(sb);
if (locked) {
if (atomic_inc_not_zero(&sb->s_active)) {
put_super(sb);
return true;
}
super_unlock_excl(sb);
}
wait_var_event(&sb->s_flags, wait_dead(sb));
put_super(sb);
return false;
}
/*
* super_trylock_shared - try to grab ->s_umount shared
* @sb: reference we are trying to grab
*
* Try to prevent fs shutdown. This is used in places where we
* cannot take an active reference but we need to ensure that the
* filesystem is not shut down while we are working on it. It returns
* false if we cannot acquire s_umount or if we lose the race and
* filesystem already got into shutdown, and returns true with the s_umount
* lock held in read mode in case of success. On successful return,
* the caller must drop the s_umount lock when done.
*
* Note that unlike get_super() et.al. this one does *not* bump ->s_count.
* The reason why it's safe is that we are OK with doing trylock instead
* of down_read(). There's a couple of places that are OK with that, but
* it's very much not a general-purpose interface.
*/
bool super_trylock_shared(struct super_block *sb)
{
if (down_read_trylock(&sb->s_umount)) {
super: wait for nascent superblocks Recent patches experiment with making it possible to allocate a new superblock before opening the relevant block device. Naturally this has intricate side-effects that we get to learn about while developing this. Superblock allocators such as sget{_fc}() return with s_umount of the new superblock held and lock ordering currently requires that block level locks such as bdev_lock and open_mutex rank above s_umount. Before aca740cecbe5 ("fs: open block device after superblock creation") ordering was guaranteed to be correct as block devices were opened prior to superblock allocation and thus s_umount wasn't held. But now s_umount must be dropped before opening block devices to avoid locking violations. This has consequences. The main one being that iterators over @super_blocks and @fs_supers that grab a temporary reference to the superblock can now also grab s_umount before the caller has managed to open block devices and called fill_super(). So whereas before such iterators or concurrent mounts would have simply slept on s_umount until SB_BORN was set or the superblock was discard due to initalization failure they can now needlessly spin through sget{_fc}(). If the caller is sleeping on bdev_lock or open_mutex one caller waiting on SB_BORN will always spin somewhere and potentially this can go on for quite a while. It should be possible to drop s_umount while allowing iterators to wait on a nascent superblock to either be born or discarded. This patch implements a wait_var_event() mechanism allowing iterators to sleep until they are woken when the superblock is born or discarded. This also allows us to avoid relooping through @fs_supers and @super_blocks if a superblock isn't yet born or dying. Link: aca740cecbe5 ("fs: open block device after superblock creation") Reviewed-by: Jan Kara <jack@suse.cz> Message-Id: <20230818-vfs-super-fixes-v3-v3-3-9f0b1876e46b@kernel.org> Signed-off-by: Christian Brauner <brauner@kernel.org>
2023-08-18 14:00:50 +00:00
if (!(sb->s_flags & SB_DYING) && sb->s_root &&
(sb->s_flags & SB_BORN))
return true;
super_unlock_shared(sb);
}
return false;
}
/**
* retire_super - prevents superblock from being reused
* @sb: superblock to retire
*
* The function marks superblock to be ignored in superblock test, which
* prevents it from being reused for any new mounts. If the superblock has
* a private bdi, it also unregisters it, but doesn't reduce the refcount
* of the superblock to prevent potential races. The refcount is reduced
* by generic_shutdown_super(). The function can not be called
* concurrently with generic_shutdown_super(). It is safe to call the
* function multiple times, subsequent calls have no effect.
*
* The marker will affect the re-use only for block-device-based
* superblocks. Other superblocks will still get marked if this function
* is used, but that will not affect their reusability.
*/
void retire_super(struct super_block *sb)
{
WARN_ON(!sb->s_bdev);
super: wait for nascent superblocks Recent patches experiment with making it possible to allocate a new superblock before opening the relevant block device. Naturally this has intricate side-effects that we get to learn about while developing this. Superblock allocators such as sget{_fc}() return with s_umount of the new superblock held and lock ordering currently requires that block level locks such as bdev_lock and open_mutex rank above s_umount. Before aca740cecbe5 ("fs: open block device after superblock creation") ordering was guaranteed to be correct as block devices were opened prior to superblock allocation and thus s_umount wasn't held. But now s_umount must be dropped before opening block devices to avoid locking violations. This has consequences. The main one being that iterators over @super_blocks and @fs_supers that grab a temporary reference to the superblock can now also grab s_umount before the caller has managed to open block devices and called fill_super(). So whereas before such iterators or concurrent mounts would have simply slept on s_umount until SB_BORN was set or the superblock was discard due to initalization failure they can now needlessly spin through sget{_fc}(). If the caller is sleeping on bdev_lock or open_mutex one caller waiting on SB_BORN will always spin somewhere and potentially this can go on for quite a while. It should be possible to drop s_umount while allowing iterators to wait on a nascent superblock to either be born or discarded. This patch implements a wait_var_event() mechanism allowing iterators to sleep until they are woken when the superblock is born or discarded. This also allows us to avoid relooping through @fs_supers and @super_blocks if a superblock isn't yet born or dying. Link: aca740cecbe5 ("fs: open block device after superblock creation") Reviewed-by: Jan Kara <jack@suse.cz> Message-Id: <20230818-vfs-super-fixes-v3-v3-3-9f0b1876e46b@kernel.org> Signed-off-by: Christian Brauner <brauner@kernel.org>
2023-08-18 14:00:50 +00:00
__super_lock_excl(sb);
if (sb->s_iflags & SB_I_PERSB_BDI) {
bdi_unregister(sb->s_bdi);
sb->s_iflags &= ~SB_I_PERSB_BDI;
}
sb->s_iflags |= SB_I_RETIRED;
super_unlock_excl(sb);
}
EXPORT_SYMBOL(retire_super);
/**
* generic_shutdown_super - common helper for ->kill_sb()
* @sb: superblock to kill
*
* generic_shutdown_super() does all fs-independent work on superblock
* shutdown. Typical ->kill_sb() should pick all fs-specific objects
* that need destruction out of superblock, call generic_shutdown_super()
* and release aforementioned objects. Note: dentries and inodes _are_
* taken care of and do not need specific handling.
[PATCH] VFS: Destroy the dentries contributed by a superblock on unmounting The attached patch destroys all the dentries attached to a superblock in one go by: (1) Destroying the tree rooted at s_root. (2) Destroying every entry in the anon list, one at a time. (3) Each entry in the anon list has its subtree consumed from the leaves inwards. This reduces the amount of work generic_shutdown_super() does, and avoids iterating through the dentry_unused list. Note that locking is almost entirely absent in the shrink_dcache_for_umount*() functions added by this patch. This is because: (1) at the point the filesystem calls generic_shutdown_super(), it is not permitted to further touch the superblock's set of dentries, and nor may it remove aliases from inodes; (2) the dcache memory shrinker now skips dentries that are being unmounted; and (3) the superblock no longer has any external references through which the VFS can reach it. Given these points, the only locking we need to do is when we remove dentries from the unused list and the name hashes, which we do a directory's worth at a time. We also don't need to guard against reference counts going to zero unexpectedly and removing bits of the tree we're working on as nothing else can call dput(). A cut down version of dentry_iput() has been folded into shrink_dcache_for_umount_subtree() function. Apart from not needing to unlock things, it also doesn't need to check for inotify watches. In this version of the patch, the complaint about a dentry still being in use has been expanded from a single BUG_ON() and now gives much more information. Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: NeilBrown <neilb@suse.de> Acked-by: Ian Kent <raven@themaw.net> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-11 08:22:19 +00:00
*
* Upon calling this function, the filesystem may no longer alter or
* rearrange the set of dentries belonging to this super_block, nor may it
* change the attachments of dentries to inodes.
*/
void generic_shutdown_super(struct super_block *sb)
{
const struct super_operations *sop = sb->s_op;
[PATCH] VFS: Destroy the dentries contributed by a superblock on unmounting The attached patch destroys all the dentries attached to a superblock in one go by: (1) Destroying the tree rooted at s_root. (2) Destroying every entry in the anon list, one at a time. (3) Each entry in the anon list has its subtree consumed from the leaves inwards. This reduces the amount of work generic_shutdown_super() does, and avoids iterating through the dentry_unused list. Note that locking is almost entirely absent in the shrink_dcache_for_umount*() functions added by this patch. This is because: (1) at the point the filesystem calls generic_shutdown_super(), it is not permitted to further touch the superblock's set of dentries, and nor may it remove aliases from inodes; (2) the dcache memory shrinker now skips dentries that are being unmounted; and (3) the superblock no longer has any external references through which the VFS can reach it. Given these points, the only locking we need to do is when we remove dentries from the unused list and the name hashes, which we do a directory's worth at a time. We also don't need to guard against reference counts going to zero unexpectedly and removing bits of the tree we're working on as nothing else can call dput(). A cut down version of dentry_iput() has been folded into shrink_dcache_for_umount_subtree() function. Apart from not needing to unlock things, it also doesn't need to check for inotify watches. In this version of the patch, the complaint about a dentry still being in use has been expanded from a single BUG_ON() and now gives much more information. Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: NeilBrown <neilb@suse.de> Acked-by: Ian Kent <raven@themaw.net> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-11 08:22:19 +00:00
if (sb->s_root) {
shrink_dcache_for_umount(sb);
sync_filesystem(sb);
sb->s_flags &= ~SB_ACTIVE;
writeback: flush inode cgroup wb switches instead of pinning super_block If cgroup writeback is in use, inodes can be scheduled for asynchronous wb switching. Before 5ff8eaac1636 ("writeback: keep superblock pinned during cgroup writeback association switches"), this could race with umount leading to super_block being destroyed while inodes are pinned for wb switching. 5ff8eaac1636 fixed it by bumping s_active while wb switches are in flight; however, this allowed in-flight wb switches to make umounts asynchronous when the userland expected synchronosity - e.g. fsck immediately following umount may fail because the device is still busy. This patch removes the problematic super_block pinning and instead makes generic_shutdown_super() flush in-flight wb switches. wb switches are now executed on a dedicated isw_wq so that they can be flushed and isw_nr_in_flight keeps track of the number of in-flight wb switches so that flushing can be avoided in most cases. v2: Move cgroup_writeback_umount() further below and add MS_ACTIVE check in inode_switch_wbs() as Jan an Al suggested. Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: Tahsin Erdogan <tahsin@google.com> Cc: Jan Kara <jack@suse.cz> Cc: Al Viro <viro@ZenIV.linux.org.uk> Link: http://lkml.kernel.org/g/CAAeU0aNCq7LGODvVGRU-oU_o-6enii5ey0p1c26D1ZzYwkDc5A@mail.gmail.com Fixes: 5ff8eaac1636 ("writeback: keep superblock pinned during cgroup writeback association switches") Cc: stable@vger.kernel.org #v4.5 Reviewed-by: Jan Kara <jack@suse.cz> Tested-by: Tahsin Erdogan <tahsin@google.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-02-29 23:28:53 +00:00
cgroup_writeback_umount();
/* Evict all inodes with zero refcount. */
evict_inodes(sb);
/*
* Clean up and evict any inodes that still have references due
* to fsnotify or the security policy.
*/
fsnotify_sb_delete(sb);
security_sb_delete(sb);
/*
* Now that all potentially-encrypted inodes have been evicted,
* the fscrypt keyring can be destroyed.
*/
fscrypt_destroy_keyring(sb);
if (sb->s_dio_done_wq) {
destroy_workqueue(sb->s_dio_done_wq);
sb->s_dio_done_wq = NULL;
}
if (sop->put_super)
sop->put_super(sb);
if (CHECK_DATA_CORRUPTION(!list_empty(&sb->s_inodes),
"VFS: Busy inodes after unmount of %s (%s)",
sb->s_id, sb->s_type->name)) {
/*
* Adding a proper bailout path here would be hard, but
* we can at least make it more likely that a later
* iput_final() or such crashes cleanly.
*/
struct inode *inode;
spin_lock(&sb->s_inode_list_lock);
list_for_each_entry(inode, &sb->s_inodes, i_sb_list) {
inode->i_op = VFS_PTR_POISON;
inode->i_sb = VFS_PTR_POISON;
inode->i_mapping = VFS_PTR_POISON;
}
spin_unlock(&sb->s_inode_list_lock);
}
}
super: wait for nascent superblocks Recent patches experiment with making it possible to allocate a new superblock before opening the relevant block device. Naturally this has intricate side-effects that we get to learn about while developing this. Superblock allocators such as sget{_fc}() return with s_umount of the new superblock held and lock ordering currently requires that block level locks such as bdev_lock and open_mutex rank above s_umount. Before aca740cecbe5 ("fs: open block device after superblock creation") ordering was guaranteed to be correct as block devices were opened prior to superblock allocation and thus s_umount wasn't held. But now s_umount must be dropped before opening block devices to avoid locking violations. This has consequences. The main one being that iterators over @super_blocks and @fs_supers that grab a temporary reference to the superblock can now also grab s_umount before the caller has managed to open block devices and called fill_super(). So whereas before such iterators or concurrent mounts would have simply slept on s_umount until SB_BORN was set or the superblock was discard due to initalization failure they can now needlessly spin through sget{_fc}(). If the caller is sleeping on bdev_lock or open_mutex one caller waiting on SB_BORN will always spin somewhere and potentially this can go on for quite a while. It should be possible to drop s_umount while allowing iterators to wait on a nascent superblock to either be born or discarded. This patch implements a wait_var_event() mechanism allowing iterators to sleep until they are woken when the superblock is born or discarded. This also allows us to avoid relooping through @fs_supers and @super_blocks if a superblock isn't yet born or dying. Link: aca740cecbe5 ("fs: open block device after superblock creation") Reviewed-by: Jan Kara <jack@suse.cz> Message-Id: <20230818-vfs-super-fixes-v3-v3-3-9f0b1876e46b@kernel.org> Signed-off-by: Christian Brauner <brauner@kernel.org>
2023-08-18 14:00:50 +00:00
/*
* Broadcast to everyone that grabbed a temporary reference to this
* superblock before we removed it from @fs_supers that the superblock
* is dying. Every walker of @fs_supers outside of sget{_fc}() will now
* discard this superblock and treat it as dead.
*
* We leave the superblock on @fs_supers so it can be found by
* sget{_fc}() until we passed sb->kill_sb().
super: wait for nascent superblocks Recent patches experiment with making it possible to allocate a new superblock before opening the relevant block device. Naturally this has intricate side-effects that we get to learn about while developing this. Superblock allocators such as sget{_fc}() return with s_umount of the new superblock held and lock ordering currently requires that block level locks such as bdev_lock and open_mutex rank above s_umount. Before aca740cecbe5 ("fs: open block device after superblock creation") ordering was guaranteed to be correct as block devices were opened prior to superblock allocation and thus s_umount wasn't held. But now s_umount must be dropped before opening block devices to avoid locking violations. This has consequences. The main one being that iterators over @super_blocks and @fs_supers that grab a temporary reference to the superblock can now also grab s_umount before the caller has managed to open block devices and called fill_super(). So whereas before such iterators or concurrent mounts would have simply slept on s_umount until SB_BORN was set or the superblock was discard due to initalization failure they can now needlessly spin through sget{_fc}(). If the caller is sleeping on bdev_lock or open_mutex one caller waiting on SB_BORN will always spin somewhere and potentially this can go on for quite a while. It should be possible to drop s_umount while allowing iterators to wait on a nascent superblock to either be born or discarded. This patch implements a wait_var_event() mechanism allowing iterators to sleep until they are woken when the superblock is born or discarded. This also allows us to avoid relooping through @fs_supers and @super_blocks if a superblock isn't yet born or dying. Link: aca740cecbe5 ("fs: open block device after superblock creation") Reviewed-by: Jan Kara <jack@suse.cz> Message-Id: <20230818-vfs-super-fixes-v3-v3-3-9f0b1876e46b@kernel.org> Signed-off-by: Christian Brauner <brauner@kernel.org>
2023-08-18 14:00:50 +00:00
*/
super_wake(sb, SB_DYING);
super_unlock_excl(sb);
if (sb->s_bdi != &noop_backing_dev_info) {
if (sb->s_iflags & SB_I_PERSB_BDI)
bdi_unregister(sb->s_bdi);
bdi_put(sb->s_bdi);
sb->s_bdi = &noop_backing_dev_info;
}
}
EXPORT_SYMBOL(generic_shutdown_super);
bool mount_capable(struct fs_context *fc)
{
if (!(fc->fs_type->fs_flags & FS_USERNS_MOUNT))
return capable(CAP_SYS_ADMIN);
else
return ns_capable(fc->user_ns, CAP_SYS_ADMIN);
}
/**
* sget_fc - Find or create a superblock
* @fc: Filesystem context.
* @test: Comparison callback
* @set: Setup callback
*
fs: add FSCONFIG_CMD_CREATE_EXCL Summary ======= This introduces FSCONFIG_CMD_CREATE_EXCL which will allows userspace to implement something like mount -t ext4 --exclusive /dev/sda /B which fails if a superblock for the requested filesystem does already exist: Before this patch ----------------- $ sudo ./move-mount -f xfs -o source=/dev/sda4 /A Requesting filesystem type xfs Mount options requested: source=/dev/sda4 Attaching mount at /A Moving single attached mount Setting key(source) with val(/dev/sda4) $ sudo ./move-mount -f xfs -o source=/dev/sda4 /B Requesting filesystem type xfs Mount options requested: source=/dev/sda4 Attaching mount at /B Moving single attached mount Setting key(source) with val(/dev/sda4) After this patch with --exclusive as a switch for FSCONFIG_CMD_CREATE_EXCL -------------------------------------------------------------------------- $ sudo ./move-mount -f xfs --exclusive -o source=/dev/sda4 /A Requesting filesystem type xfs Request exclusive superblock creation Mount options requested: source=/dev/sda4 Attaching mount at /A Moving single attached mount Setting key(source) with val(/dev/sda4) $ sudo ./move-mount -f xfs --exclusive -o source=/dev/sda4 /B Requesting filesystem type xfs Request exclusive superblock creation Mount options requested: source=/dev/sda4 Attaching mount at /B Moving single attached mount Setting key(source) with val(/dev/sda4) Device or resource busy | move-mount.c: 300: do_fsconfig: i xfs: reusing existing filesystem not allowed Details ======= As mentioned on the list (cf. [1]-[3]) mount requests like mount -t ext4 /dev/sda /A are ambigous for userspace. Either a new superblock has been created and mounted or an existing superblock has been reused and a bind-mount has been created. This becomes clear in the following example where two processes create the same mount for the same block device: P1 P2 fd_fs = fsopen("ext4"); fd_fs = fsopen("ext4"); fsconfig(fd_fs, FSCONFIG_SET_STRING, "source", "/dev/sda"); fsconfig(fd_fs, FSCONFIG_SET_STRING, "source", "/dev/sda"); fsconfig(fd_fs, FSCONFIG_SET_STRING, "dax", "always"); fsconfig(fd_fs, FSCONFIG_SET_STRING, "resuid", "1000"); // wins and creates superblock fsconfig(fd_fs, FSCONFIG_CMD_CREATE, ...) // finds compatible superblock of P1 // spins until P1 sets SB_BORN and grabs a reference fsconfig(fd_fs, FSCONFIG_CMD_CREATE, ...) fd_mnt1 = fsmount(fd_fs); fd_mnt2 = fsmount(fd_fs); move_mount(fd_mnt1, "/A") move_mount(fd_mnt2, "/B") Not just does P2 get a bind-mount but the mount options that P2 requestes are silently ignored. The VFS itself doesn't, can't and shouldn't enforce filesystem specific mount option compatibility. It only enforces incompatibility for read-only <-> read-write transitions: mount -t ext4 /dev/sda /A mount -t ext4 -o ro /dev/sda /B The read-only request will fail with EBUSY as the VFS can't just silently transition a superblock from read-write to read-only or vica versa without risking security issues. To userspace this silent superblock reuse can become a security issue in because there is currently no straightforward way for userspace to know that they did indeed manage to create a new superblock and didn't just reuse an existing one. This adds a new FSCONFIG_CMD_CREATE_EXCL command to fsconfig() that returns EBUSY if an existing superblock would be reused. Userspace that needs to be sure that it did create a new superblock with the requested mount options can request superblock creation using this command. If the command succeeds they can be sure that they did create a new superblock with the requested mount options. This requires the new mount api. With the old mount api it would be necessary to plumb this through every legacy filesystem's file_system_type->mount() method. If they want this feature they are most welcome to switch to the new mount api. Following is an analysis of the effect of FSCONFIG_CMD_CREATE_EXCL on each high-level superblock creation helper: (1) get_tree_nodev() Always allocate new superblock. Hence, FSCONFIG_CMD_CREATE and FSCONFIG_CMD_CREATE_EXCL are equivalent. The binderfs or overlayfs filesystems are examples. (4) get_tree_keyed() Finds an existing superblock based on sb->s_fs_info. Hence, FSCONFIG_CMD_CREATE would reuse an existing superblock whereas FSCONFIG_CMD_CREATE_EXCL would reject it with EBUSY. The mqueue or nfsd filesystems are examples. (2) get_tree_bdev() This effectively works like get_tree_keyed(). The ext4 or xfs filesystems are examples. (3) get_tree_single() Only one superblock of this filesystem type can ever exist. Hence, FSCONFIG_CMD_CREATE would reuse an existing superblock whereas FSCONFIG_CMD_CREATE_EXCL would reject it with EBUSY. The securityfs or configfs filesystems are examples. Note that some single-instance filesystems never destroy the superblock once it has been created during the first mount. For example, if securityfs has been mounted at least onces then the created superblock will never be destroyed again as long as there is still an LSM making use it. Consequently, even if securityfs is unmounted and the superblock seemingly destroyed it really isn't which means that FSCONFIG_CMD_CREATE_EXCL will continue rejecting reusing an existing superblock. This is acceptable thugh since special purpose filesystems such as this shouldn't have a need to use FSCONFIG_CMD_CREATE_EXCL anyway and if they do it's probably to make sure that mount options aren't ignored. Following is an analysis of the effect of FSCONFIG_CMD_CREATE_EXCL on filesystems that make use of the low-level sget_fc() helper directly. They're all effectively variants on get_tree_keyed(), get_tree_bdev(), or get_tree_nodev(): (5) mtd_get_sb() Similar logic to get_tree_keyed(). (6) afs_get_tree() Similar logic to get_tree_keyed(). (7) ceph_get_tree() Similar logic to get_tree_keyed(). Already explicitly allows forcing the allocation of a new superblock via CEPH_OPT_NOSHARE. This turns it into get_tree_nodev(). (8) fuse_get_tree_submount() Similar logic to get_tree_nodev(). (9) fuse_get_tree() Forces reuse of existing FUSE superblock. Forces reuse of existing superblock if passed in file refers to an existing FUSE connection. If FSCONFIG_CMD_CREATE_EXCL is specified together with an fd referring to an existing FUSE connections this would cause the superblock reusal to fail. If reusing is the intent then FSCONFIG_CMD_CREATE_EXCL shouldn't be specified. (10) fuse_get_tree() -> get_tree_nodev() Same logic as in get_tree_nodev(). (11) fuse_get_tree() -> get_tree_bdev() Same logic as in get_tree_bdev(). (12) virtio_fs_get_tree() Same logic as get_tree_keyed(). (13) gfs2_meta_get_tree() Forces reuse of existing gfs2 superblock. Mounting gfs2meta enforces that a gf2s superblock must already exist. If not, it will error out. Consequently, mounting gfs2meta with FSCONFIG_CMD_CREATE_EXCL would always fail. If reusing is the intent then FSCONFIG_CMD_CREATE_EXCL shouldn't be specified. (14) kernfs_get_tree() Similar logic to get_tree_keyed(). (15) nfs_get_tree_common() Similar logic to get_tree_keyed(). Already explicitly allows forcing the allocation of a new superblock via NFS_MOUNT_UNSHARED. This effectively turns it into get_tree_nodev(). Link: [1] https://lore.kernel.org/linux-block/20230704-fasching-wertarbeit-7c6ffb01c83d@brauner Link: [2] https://lore.kernel.org/linux-block/20230705-pumpwerk-vielversprechend-a4b1fd947b65@brauner Link: [3] https://lore.kernel.org/linux-fsdevel/20230725-einnahmen-warnschilder-17779aec0a97@brauner Reviewed-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Aleksa Sarai <cyphar@cyphar.com> Message-Id: <20230802-vfs-super-exclusive-v2-4-95dc4e41b870@kernel.org> Signed-off-by: Christian Brauner <brauner@kernel.org>
2023-08-02 11:57:06 +00:00
* Create a new superblock or find an existing one.
*
fs: add FSCONFIG_CMD_CREATE_EXCL Summary ======= This introduces FSCONFIG_CMD_CREATE_EXCL which will allows userspace to implement something like mount -t ext4 --exclusive /dev/sda /B which fails if a superblock for the requested filesystem does already exist: Before this patch ----------------- $ sudo ./move-mount -f xfs -o source=/dev/sda4 /A Requesting filesystem type xfs Mount options requested: source=/dev/sda4 Attaching mount at /A Moving single attached mount Setting key(source) with val(/dev/sda4) $ sudo ./move-mount -f xfs -o source=/dev/sda4 /B Requesting filesystem type xfs Mount options requested: source=/dev/sda4 Attaching mount at /B Moving single attached mount Setting key(source) with val(/dev/sda4) After this patch with --exclusive as a switch for FSCONFIG_CMD_CREATE_EXCL -------------------------------------------------------------------------- $ sudo ./move-mount -f xfs --exclusive -o source=/dev/sda4 /A Requesting filesystem type xfs Request exclusive superblock creation Mount options requested: source=/dev/sda4 Attaching mount at /A Moving single attached mount Setting key(source) with val(/dev/sda4) $ sudo ./move-mount -f xfs --exclusive -o source=/dev/sda4 /B Requesting filesystem type xfs Request exclusive superblock creation Mount options requested: source=/dev/sda4 Attaching mount at /B Moving single attached mount Setting key(source) with val(/dev/sda4) Device or resource busy | move-mount.c: 300: do_fsconfig: i xfs: reusing existing filesystem not allowed Details ======= As mentioned on the list (cf. [1]-[3]) mount requests like mount -t ext4 /dev/sda /A are ambigous for userspace. Either a new superblock has been created and mounted or an existing superblock has been reused and a bind-mount has been created. This becomes clear in the following example where two processes create the same mount for the same block device: P1 P2 fd_fs = fsopen("ext4"); fd_fs = fsopen("ext4"); fsconfig(fd_fs, FSCONFIG_SET_STRING, "source", "/dev/sda"); fsconfig(fd_fs, FSCONFIG_SET_STRING, "source", "/dev/sda"); fsconfig(fd_fs, FSCONFIG_SET_STRING, "dax", "always"); fsconfig(fd_fs, FSCONFIG_SET_STRING, "resuid", "1000"); // wins and creates superblock fsconfig(fd_fs, FSCONFIG_CMD_CREATE, ...) // finds compatible superblock of P1 // spins until P1 sets SB_BORN and grabs a reference fsconfig(fd_fs, FSCONFIG_CMD_CREATE, ...) fd_mnt1 = fsmount(fd_fs); fd_mnt2 = fsmount(fd_fs); move_mount(fd_mnt1, "/A") move_mount(fd_mnt2, "/B") Not just does P2 get a bind-mount but the mount options that P2 requestes are silently ignored. The VFS itself doesn't, can't and shouldn't enforce filesystem specific mount option compatibility. It only enforces incompatibility for read-only <-> read-write transitions: mount -t ext4 /dev/sda /A mount -t ext4 -o ro /dev/sda /B The read-only request will fail with EBUSY as the VFS can't just silently transition a superblock from read-write to read-only or vica versa without risking security issues. To userspace this silent superblock reuse can become a security issue in because there is currently no straightforward way for userspace to know that they did indeed manage to create a new superblock and didn't just reuse an existing one. This adds a new FSCONFIG_CMD_CREATE_EXCL command to fsconfig() that returns EBUSY if an existing superblock would be reused. Userspace that needs to be sure that it did create a new superblock with the requested mount options can request superblock creation using this command. If the command succeeds they can be sure that they did create a new superblock with the requested mount options. This requires the new mount api. With the old mount api it would be necessary to plumb this through every legacy filesystem's file_system_type->mount() method. If they want this feature they are most welcome to switch to the new mount api. Following is an analysis of the effect of FSCONFIG_CMD_CREATE_EXCL on each high-level superblock creation helper: (1) get_tree_nodev() Always allocate new superblock. Hence, FSCONFIG_CMD_CREATE and FSCONFIG_CMD_CREATE_EXCL are equivalent. The binderfs or overlayfs filesystems are examples. (4) get_tree_keyed() Finds an existing superblock based on sb->s_fs_info. Hence, FSCONFIG_CMD_CREATE would reuse an existing superblock whereas FSCONFIG_CMD_CREATE_EXCL would reject it with EBUSY. The mqueue or nfsd filesystems are examples. (2) get_tree_bdev() This effectively works like get_tree_keyed(). The ext4 or xfs filesystems are examples. (3) get_tree_single() Only one superblock of this filesystem type can ever exist. Hence, FSCONFIG_CMD_CREATE would reuse an existing superblock whereas FSCONFIG_CMD_CREATE_EXCL would reject it with EBUSY. The securityfs or configfs filesystems are examples. Note that some single-instance filesystems never destroy the superblock once it has been created during the first mount. For example, if securityfs has been mounted at least onces then the created superblock will never be destroyed again as long as there is still an LSM making use it. Consequently, even if securityfs is unmounted and the superblock seemingly destroyed it really isn't which means that FSCONFIG_CMD_CREATE_EXCL will continue rejecting reusing an existing superblock. This is acceptable thugh since special purpose filesystems such as this shouldn't have a need to use FSCONFIG_CMD_CREATE_EXCL anyway and if they do it's probably to make sure that mount options aren't ignored. Following is an analysis of the effect of FSCONFIG_CMD_CREATE_EXCL on filesystems that make use of the low-level sget_fc() helper directly. They're all effectively variants on get_tree_keyed(), get_tree_bdev(), or get_tree_nodev(): (5) mtd_get_sb() Similar logic to get_tree_keyed(). (6) afs_get_tree() Similar logic to get_tree_keyed(). (7) ceph_get_tree() Similar logic to get_tree_keyed(). Already explicitly allows forcing the allocation of a new superblock via CEPH_OPT_NOSHARE. This turns it into get_tree_nodev(). (8) fuse_get_tree_submount() Similar logic to get_tree_nodev(). (9) fuse_get_tree() Forces reuse of existing FUSE superblock. Forces reuse of existing superblock if passed in file refers to an existing FUSE connection. If FSCONFIG_CMD_CREATE_EXCL is specified together with an fd referring to an existing FUSE connections this would cause the superblock reusal to fail. If reusing is the intent then FSCONFIG_CMD_CREATE_EXCL shouldn't be specified. (10) fuse_get_tree() -> get_tree_nodev() Same logic as in get_tree_nodev(). (11) fuse_get_tree() -> get_tree_bdev() Same logic as in get_tree_bdev(). (12) virtio_fs_get_tree() Same logic as get_tree_keyed(). (13) gfs2_meta_get_tree() Forces reuse of existing gfs2 superblock. Mounting gfs2meta enforces that a gf2s superblock must already exist. If not, it will error out. Consequently, mounting gfs2meta with FSCONFIG_CMD_CREATE_EXCL would always fail. If reusing is the intent then FSCONFIG_CMD_CREATE_EXCL shouldn't be specified. (14) kernfs_get_tree() Similar logic to get_tree_keyed(). (15) nfs_get_tree_common() Similar logic to get_tree_keyed(). Already explicitly allows forcing the allocation of a new superblock via NFS_MOUNT_UNSHARED. This effectively turns it into get_tree_nodev(). Link: [1] https://lore.kernel.org/linux-block/20230704-fasching-wertarbeit-7c6ffb01c83d@brauner Link: [2] https://lore.kernel.org/linux-block/20230705-pumpwerk-vielversprechend-a4b1fd947b65@brauner Link: [3] https://lore.kernel.org/linux-fsdevel/20230725-einnahmen-warnschilder-17779aec0a97@brauner Reviewed-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Aleksa Sarai <cyphar@cyphar.com> Message-Id: <20230802-vfs-super-exclusive-v2-4-95dc4e41b870@kernel.org> Signed-off-by: Christian Brauner <brauner@kernel.org>
2023-08-02 11:57:06 +00:00
* The @test callback is used to find a matching existing superblock.
* Whether or not the requested parameters in @fc are taken into account
* is specific to the @test callback that is used. They may even be
* completely ignored.
*
* If an extant superblock is matched, it will be returned unless:
*
* (1) the namespace the filesystem context @fc and the extant
* superblock's namespace differ
*
* (2) the filesystem context @fc has requested that reusing an extant
* superblock is not allowed
*
* In both cases EBUSY will be returned.
*
* If no match is made, a new superblock will be allocated and basic
fs: add FSCONFIG_CMD_CREATE_EXCL Summary ======= This introduces FSCONFIG_CMD_CREATE_EXCL which will allows userspace to implement something like mount -t ext4 --exclusive /dev/sda /B which fails if a superblock for the requested filesystem does already exist: Before this patch ----------------- $ sudo ./move-mount -f xfs -o source=/dev/sda4 /A Requesting filesystem type xfs Mount options requested: source=/dev/sda4 Attaching mount at /A Moving single attached mount Setting key(source) with val(/dev/sda4) $ sudo ./move-mount -f xfs -o source=/dev/sda4 /B Requesting filesystem type xfs Mount options requested: source=/dev/sda4 Attaching mount at /B Moving single attached mount Setting key(source) with val(/dev/sda4) After this patch with --exclusive as a switch for FSCONFIG_CMD_CREATE_EXCL -------------------------------------------------------------------------- $ sudo ./move-mount -f xfs --exclusive -o source=/dev/sda4 /A Requesting filesystem type xfs Request exclusive superblock creation Mount options requested: source=/dev/sda4 Attaching mount at /A Moving single attached mount Setting key(source) with val(/dev/sda4) $ sudo ./move-mount -f xfs --exclusive -o source=/dev/sda4 /B Requesting filesystem type xfs Request exclusive superblock creation Mount options requested: source=/dev/sda4 Attaching mount at /B Moving single attached mount Setting key(source) with val(/dev/sda4) Device or resource busy | move-mount.c: 300: do_fsconfig: i xfs: reusing existing filesystem not allowed Details ======= As mentioned on the list (cf. [1]-[3]) mount requests like mount -t ext4 /dev/sda /A are ambigous for userspace. Either a new superblock has been created and mounted or an existing superblock has been reused and a bind-mount has been created. This becomes clear in the following example where two processes create the same mount for the same block device: P1 P2 fd_fs = fsopen("ext4"); fd_fs = fsopen("ext4"); fsconfig(fd_fs, FSCONFIG_SET_STRING, "source", "/dev/sda"); fsconfig(fd_fs, FSCONFIG_SET_STRING, "source", "/dev/sda"); fsconfig(fd_fs, FSCONFIG_SET_STRING, "dax", "always"); fsconfig(fd_fs, FSCONFIG_SET_STRING, "resuid", "1000"); // wins and creates superblock fsconfig(fd_fs, FSCONFIG_CMD_CREATE, ...) // finds compatible superblock of P1 // spins until P1 sets SB_BORN and grabs a reference fsconfig(fd_fs, FSCONFIG_CMD_CREATE, ...) fd_mnt1 = fsmount(fd_fs); fd_mnt2 = fsmount(fd_fs); move_mount(fd_mnt1, "/A") move_mount(fd_mnt2, "/B") Not just does P2 get a bind-mount but the mount options that P2 requestes are silently ignored. The VFS itself doesn't, can't and shouldn't enforce filesystem specific mount option compatibility. It only enforces incompatibility for read-only <-> read-write transitions: mount -t ext4 /dev/sda /A mount -t ext4 -o ro /dev/sda /B The read-only request will fail with EBUSY as the VFS can't just silently transition a superblock from read-write to read-only or vica versa without risking security issues. To userspace this silent superblock reuse can become a security issue in because there is currently no straightforward way for userspace to know that they did indeed manage to create a new superblock and didn't just reuse an existing one. This adds a new FSCONFIG_CMD_CREATE_EXCL command to fsconfig() that returns EBUSY if an existing superblock would be reused. Userspace that needs to be sure that it did create a new superblock with the requested mount options can request superblock creation using this command. If the command succeeds they can be sure that they did create a new superblock with the requested mount options. This requires the new mount api. With the old mount api it would be necessary to plumb this through every legacy filesystem's file_system_type->mount() method. If they want this feature they are most welcome to switch to the new mount api. Following is an analysis of the effect of FSCONFIG_CMD_CREATE_EXCL on each high-level superblock creation helper: (1) get_tree_nodev() Always allocate new superblock. Hence, FSCONFIG_CMD_CREATE and FSCONFIG_CMD_CREATE_EXCL are equivalent. The binderfs or overlayfs filesystems are examples. (4) get_tree_keyed() Finds an existing superblock based on sb->s_fs_info. Hence, FSCONFIG_CMD_CREATE would reuse an existing superblock whereas FSCONFIG_CMD_CREATE_EXCL would reject it with EBUSY. The mqueue or nfsd filesystems are examples. (2) get_tree_bdev() This effectively works like get_tree_keyed(). The ext4 or xfs filesystems are examples. (3) get_tree_single() Only one superblock of this filesystem type can ever exist. Hence, FSCONFIG_CMD_CREATE would reuse an existing superblock whereas FSCONFIG_CMD_CREATE_EXCL would reject it with EBUSY. The securityfs or configfs filesystems are examples. Note that some single-instance filesystems never destroy the superblock once it has been created during the first mount. For example, if securityfs has been mounted at least onces then the created superblock will never be destroyed again as long as there is still an LSM making use it. Consequently, even if securityfs is unmounted and the superblock seemingly destroyed it really isn't which means that FSCONFIG_CMD_CREATE_EXCL will continue rejecting reusing an existing superblock. This is acceptable thugh since special purpose filesystems such as this shouldn't have a need to use FSCONFIG_CMD_CREATE_EXCL anyway and if they do it's probably to make sure that mount options aren't ignored. Following is an analysis of the effect of FSCONFIG_CMD_CREATE_EXCL on filesystems that make use of the low-level sget_fc() helper directly. They're all effectively variants on get_tree_keyed(), get_tree_bdev(), or get_tree_nodev(): (5) mtd_get_sb() Similar logic to get_tree_keyed(). (6) afs_get_tree() Similar logic to get_tree_keyed(). (7) ceph_get_tree() Similar logic to get_tree_keyed(). Already explicitly allows forcing the allocation of a new superblock via CEPH_OPT_NOSHARE. This turns it into get_tree_nodev(). (8) fuse_get_tree_submount() Similar logic to get_tree_nodev(). (9) fuse_get_tree() Forces reuse of existing FUSE superblock. Forces reuse of existing superblock if passed in file refers to an existing FUSE connection. If FSCONFIG_CMD_CREATE_EXCL is specified together with an fd referring to an existing FUSE connections this would cause the superblock reusal to fail. If reusing is the intent then FSCONFIG_CMD_CREATE_EXCL shouldn't be specified. (10) fuse_get_tree() -> get_tree_nodev() Same logic as in get_tree_nodev(). (11) fuse_get_tree() -> get_tree_bdev() Same logic as in get_tree_bdev(). (12) virtio_fs_get_tree() Same logic as get_tree_keyed(). (13) gfs2_meta_get_tree() Forces reuse of existing gfs2 superblock. Mounting gfs2meta enforces that a gf2s superblock must already exist. If not, it will error out. Consequently, mounting gfs2meta with FSCONFIG_CMD_CREATE_EXCL would always fail. If reusing is the intent then FSCONFIG_CMD_CREATE_EXCL shouldn't be specified. (14) kernfs_get_tree() Similar logic to get_tree_keyed(). (15) nfs_get_tree_common() Similar logic to get_tree_keyed(). Already explicitly allows forcing the allocation of a new superblock via NFS_MOUNT_UNSHARED. This effectively turns it into get_tree_nodev(). Link: [1] https://lore.kernel.org/linux-block/20230704-fasching-wertarbeit-7c6ffb01c83d@brauner Link: [2] https://lore.kernel.org/linux-block/20230705-pumpwerk-vielversprechend-a4b1fd947b65@brauner Link: [3] https://lore.kernel.org/linux-fsdevel/20230725-einnahmen-warnschilder-17779aec0a97@brauner Reviewed-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Aleksa Sarai <cyphar@cyphar.com> Message-Id: <20230802-vfs-super-exclusive-v2-4-95dc4e41b870@kernel.org> Signed-off-by: Christian Brauner <brauner@kernel.org>
2023-08-02 11:57:06 +00:00
* initialisation will be performed (s_type, s_fs_info and s_id will be
* set and the @set callback will be invoked), the superblock will be
* published and it will be returned in a partially constructed state
* with SB_BORN and SB_ACTIVE as yet unset.
*
* Return: On success, an extant or newly created superblock is
* returned. On failure an error pointer is returned.
*/
struct super_block *sget_fc(struct fs_context *fc,
int (*test)(struct super_block *, struct fs_context *),
int (*set)(struct super_block *, struct fs_context *))
{
struct super_block *s = NULL;
struct super_block *old;
struct user_namespace *user_ns = fc->global ? &init_user_ns : fc->user_ns;
int err;
retry:
spin_lock(&sb_lock);
if (test) {
hlist_for_each_entry(old, &fc->fs_type->fs_supers, s_instances) {
if (test(old, fc))
goto share_extant_sb;
}
}
if (!s) {
spin_unlock(&sb_lock);
s = alloc_super(fc->fs_type, fc->sb_flags, user_ns);
if (!s)
return ERR_PTR(-ENOMEM);
goto retry;
}
s->s_fs_info = fc->s_fs_info;
err = set(s, fc);
if (err) {
s->s_fs_info = NULL;
spin_unlock(&sb_lock);
destroy_unused_super(s);
return ERR_PTR(err);
}
fc->s_fs_info = NULL;
s->s_type = fc->fs_type;
s->s_iflags |= fc->s_iflags;
strscpy(s->s_id, s->s_type->name, sizeof(s->s_id));
super: wait for nascent superblocks Recent patches experiment with making it possible to allocate a new superblock before opening the relevant block device. Naturally this has intricate side-effects that we get to learn about while developing this. Superblock allocators such as sget{_fc}() return with s_umount of the new superblock held and lock ordering currently requires that block level locks such as bdev_lock and open_mutex rank above s_umount. Before aca740cecbe5 ("fs: open block device after superblock creation") ordering was guaranteed to be correct as block devices were opened prior to superblock allocation and thus s_umount wasn't held. But now s_umount must be dropped before opening block devices to avoid locking violations. This has consequences. The main one being that iterators over @super_blocks and @fs_supers that grab a temporary reference to the superblock can now also grab s_umount before the caller has managed to open block devices and called fill_super(). So whereas before such iterators or concurrent mounts would have simply slept on s_umount until SB_BORN was set or the superblock was discard due to initalization failure they can now needlessly spin through sget{_fc}(). If the caller is sleeping on bdev_lock or open_mutex one caller waiting on SB_BORN will always spin somewhere and potentially this can go on for quite a while. It should be possible to drop s_umount while allowing iterators to wait on a nascent superblock to either be born or discarded. This patch implements a wait_var_event() mechanism allowing iterators to sleep until they are woken when the superblock is born or discarded. This also allows us to avoid relooping through @fs_supers and @super_blocks if a superblock isn't yet born or dying. Link: aca740cecbe5 ("fs: open block device after superblock creation") Reviewed-by: Jan Kara <jack@suse.cz> Message-Id: <20230818-vfs-super-fixes-v3-v3-3-9f0b1876e46b@kernel.org> Signed-off-by: Christian Brauner <brauner@kernel.org>
2023-08-18 14:00:50 +00:00
/*
* Make the superblock visible on @super_blocks and @fs_supers.
* It's in a nascent state and users should wait on SB_BORN or
* SB_DYING to be set.
*/
list_add_tail(&s->s_list, &super_blocks);
hlist_add_head(&s->s_instances, &s->s_type->fs_supers);
spin_unlock(&sb_lock);
get_filesystem(s->s_type);
fs: super: dynamically allocate the s_shrink In preparation for implementing lockless slab shrink, use new APIs to dynamically allocate the s_shrink, so that it can be freed asynchronously via RCU. Then it doesn't need to wait for RCU read-side critical section when releasing the struct super_block. Link: https://lkml.kernel.org/r/20230911094444.68966-39-zhengqi.arch@bytedance.com Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com> Reviewed-by: Muchun Song <songmuchun@bytedance.com> Acked-by: David Sterba <dsterba@suse.com> Cc: Chris Mason <clm@fb.com> Cc: Josef Bacik <josef@toxicpanda.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Christian Brauner <brauner@kernel.org> Cc: Abhinav Kumar <quic_abhinavk@quicinc.com> Cc: Alasdair Kergon <agk@redhat.com> Cc: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com> Cc: Andreas Dilger <adilger.kernel@dilger.ca> Cc: Andreas Gruenbacher <agruenba@redhat.com> Cc: Anna Schumaker <anna@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Bob Peterson <rpeterso@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Carlos Llamas <cmllamas@google.com> Cc: Chandan Babu R <chandan.babu@oracle.com> Cc: Chao Yu <chao@kernel.org> Cc: Christian Koenig <christian.koenig@amd.com> Cc: Chuck Lever <cel@kernel.org> Cc: Coly Li <colyli@suse.de> Cc: Dai Ngo <Dai.Ngo@oracle.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: "Darrick J. Wong" <djwong@kernel.org> Cc: Dave Chinner <david@fromorbit.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David Airlie <airlied@gmail.com> Cc: David Hildenbrand <david@redhat.com> Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Cc: Gao Xiang <hsiangkao@linux.alibaba.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Huang Rui <ray.huang@amd.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jaegeuk Kim <jaegeuk@kernel.org> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Jan Kara <jack@suse.cz> Cc: Jason Wang <jasowang@redhat.com> Cc: Jeff Layton <jlayton@kernel.org> Cc: Jeffle Xu <jefflexu@linux.alibaba.com> Cc: Joel Fernandes (Google) <joel@joelfernandes.org> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Juergen Gross <jgross@suse.com> Cc: Kent Overstreet <kent.overstreet@gmail.com> Cc: Kirill Tkhai <tkhai@ya.ru> Cc: Marijn Suijten <marijn.suijten@somainline.org> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Mike Snitzer <snitzer@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Muchun Song <muchun.song@linux.dev> Cc: Nadav Amit <namit@vmware.com> Cc: Neil Brown <neilb@suse.de> Cc: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com> Cc: Olga Kornievskaia <kolga@netapp.com> Cc: Paul E. McKenney <paulmck@kernel.org> Cc: Richard Weinberger <richard@nod.at> Cc: Rob Clark <robdclark@gmail.com> Cc: Rob Herring <robh@kernel.org> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: Sean Paul <sean@poorly.run> Cc: Sergey Senozhatsky <senozhatsky@chromium.org> Cc: Song Liu <song@kernel.org> Cc: Stefano Stabellini <sstabellini@kernel.org> Cc: Steven Price <steven.price@arm.com> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com> Cc: Tom Talpey <tom@talpey.com> Cc: Trond Myklebust <trond.myklebust@hammerspace.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Cc: Yue Hu <huyue2@coolpad.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-09-11 09:44:37 +00:00
shrinker_register(s->s_shrink);
return s;
share_extant_sb:
fs: add FSCONFIG_CMD_CREATE_EXCL Summary ======= This introduces FSCONFIG_CMD_CREATE_EXCL which will allows userspace to implement something like mount -t ext4 --exclusive /dev/sda /B which fails if a superblock for the requested filesystem does already exist: Before this patch ----------------- $ sudo ./move-mount -f xfs -o source=/dev/sda4 /A Requesting filesystem type xfs Mount options requested: source=/dev/sda4 Attaching mount at /A Moving single attached mount Setting key(source) with val(/dev/sda4) $ sudo ./move-mount -f xfs -o source=/dev/sda4 /B Requesting filesystem type xfs Mount options requested: source=/dev/sda4 Attaching mount at /B Moving single attached mount Setting key(source) with val(/dev/sda4) After this patch with --exclusive as a switch for FSCONFIG_CMD_CREATE_EXCL -------------------------------------------------------------------------- $ sudo ./move-mount -f xfs --exclusive -o source=/dev/sda4 /A Requesting filesystem type xfs Request exclusive superblock creation Mount options requested: source=/dev/sda4 Attaching mount at /A Moving single attached mount Setting key(source) with val(/dev/sda4) $ sudo ./move-mount -f xfs --exclusive -o source=/dev/sda4 /B Requesting filesystem type xfs Request exclusive superblock creation Mount options requested: source=/dev/sda4 Attaching mount at /B Moving single attached mount Setting key(source) with val(/dev/sda4) Device or resource busy | move-mount.c: 300: do_fsconfig: i xfs: reusing existing filesystem not allowed Details ======= As mentioned on the list (cf. [1]-[3]) mount requests like mount -t ext4 /dev/sda /A are ambigous for userspace. Either a new superblock has been created and mounted or an existing superblock has been reused and a bind-mount has been created. This becomes clear in the following example where two processes create the same mount for the same block device: P1 P2 fd_fs = fsopen("ext4"); fd_fs = fsopen("ext4"); fsconfig(fd_fs, FSCONFIG_SET_STRING, "source", "/dev/sda"); fsconfig(fd_fs, FSCONFIG_SET_STRING, "source", "/dev/sda"); fsconfig(fd_fs, FSCONFIG_SET_STRING, "dax", "always"); fsconfig(fd_fs, FSCONFIG_SET_STRING, "resuid", "1000"); // wins and creates superblock fsconfig(fd_fs, FSCONFIG_CMD_CREATE, ...) // finds compatible superblock of P1 // spins until P1 sets SB_BORN and grabs a reference fsconfig(fd_fs, FSCONFIG_CMD_CREATE, ...) fd_mnt1 = fsmount(fd_fs); fd_mnt2 = fsmount(fd_fs); move_mount(fd_mnt1, "/A") move_mount(fd_mnt2, "/B") Not just does P2 get a bind-mount but the mount options that P2 requestes are silently ignored. The VFS itself doesn't, can't and shouldn't enforce filesystem specific mount option compatibility. It only enforces incompatibility for read-only <-> read-write transitions: mount -t ext4 /dev/sda /A mount -t ext4 -o ro /dev/sda /B The read-only request will fail with EBUSY as the VFS can't just silently transition a superblock from read-write to read-only or vica versa without risking security issues. To userspace this silent superblock reuse can become a security issue in because there is currently no straightforward way for userspace to know that they did indeed manage to create a new superblock and didn't just reuse an existing one. This adds a new FSCONFIG_CMD_CREATE_EXCL command to fsconfig() that returns EBUSY if an existing superblock would be reused. Userspace that needs to be sure that it did create a new superblock with the requested mount options can request superblock creation using this command. If the command succeeds they can be sure that they did create a new superblock with the requested mount options. This requires the new mount api. With the old mount api it would be necessary to plumb this through every legacy filesystem's file_system_type->mount() method. If they want this feature they are most welcome to switch to the new mount api. Following is an analysis of the effect of FSCONFIG_CMD_CREATE_EXCL on each high-level superblock creation helper: (1) get_tree_nodev() Always allocate new superblock. Hence, FSCONFIG_CMD_CREATE and FSCONFIG_CMD_CREATE_EXCL are equivalent. The binderfs or overlayfs filesystems are examples. (4) get_tree_keyed() Finds an existing superblock based on sb->s_fs_info. Hence, FSCONFIG_CMD_CREATE would reuse an existing superblock whereas FSCONFIG_CMD_CREATE_EXCL would reject it with EBUSY. The mqueue or nfsd filesystems are examples. (2) get_tree_bdev() This effectively works like get_tree_keyed(). The ext4 or xfs filesystems are examples. (3) get_tree_single() Only one superblock of this filesystem type can ever exist. Hence, FSCONFIG_CMD_CREATE would reuse an existing superblock whereas FSCONFIG_CMD_CREATE_EXCL would reject it with EBUSY. The securityfs or configfs filesystems are examples. Note that some single-instance filesystems never destroy the superblock once it has been created during the first mount. For example, if securityfs has been mounted at least onces then the created superblock will never be destroyed again as long as there is still an LSM making use it. Consequently, even if securityfs is unmounted and the superblock seemingly destroyed it really isn't which means that FSCONFIG_CMD_CREATE_EXCL will continue rejecting reusing an existing superblock. This is acceptable thugh since special purpose filesystems such as this shouldn't have a need to use FSCONFIG_CMD_CREATE_EXCL anyway and if they do it's probably to make sure that mount options aren't ignored. Following is an analysis of the effect of FSCONFIG_CMD_CREATE_EXCL on filesystems that make use of the low-level sget_fc() helper directly. They're all effectively variants on get_tree_keyed(), get_tree_bdev(), or get_tree_nodev(): (5) mtd_get_sb() Similar logic to get_tree_keyed(). (6) afs_get_tree() Similar logic to get_tree_keyed(). (7) ceph_get_tree() Similar logic to get_tree_keyed(). Already explicitly allows forcing the allocation of a new superblock via CEPH_OPT_NOSHARE. This turns it into get_tree_nodev(). (8) fuse_get_tree_submount() Similar logic to get_tree_nodev(). (9) fuse_get_tree() Forces reuse of existing FUSE superblock. Forces reuse of existing superblock if passed in file refers to an existing FUSE connection. If FSCONFIG_CMD_CREATE_EXCL is specified together with an fd referring to an existing FUSE connections this would cause the superblock reusal to fail. If reusing is the intent then FSCONFIG_CMD_CREATE_EXCL shouldn't be specified. (10) fuse_get_tree() -> get_tree_nodev() Same logic as in get_tree_nodev(). (11) fuse_get_tree() -> get_tree_bdev() Same logic as in get_tree_bdev(). (12) virtio_fs_get_tree() Same logic as get_tree_keyed(). (13) gfs2_meta_get_tree() Forces reuse of existing gfs2 superblock. Mounting gfs2meta enforces that a gf2s superblock must already exist. If not, it will error out. Consequently, mounting gfs2meta with FSCONFIG_CMD_CREATE_EXCL would always fail. If reusing is the intent then FSCONFIG_CMD_CREATE_EXCL shouldn't be specified. (14) kernfs_get_tree() Similar logic to get_tree_keyed(). (15) nfs_get_tree_common() Similar logic to get_tree_keyed(). Already explicitly allows forcing the allocation of a new superblock via NFS_MOUNT_UNSHARED. This effectively turns it into get_tree_nodev(). Link: [1] https://lore.kernel.org/linux-block/20230704-fasching-wertarbeit-7c6ffb01c83d@brauner Link: [2] https://lore.kernel.org/linux-block/20230705-pumpwerk-vielversprechend-a4b1fd947b65@brauner Link: [3] https://lore.kernel.org/linux-fsdevel/20230725-einnahmen-warnschilder-17779aec0a97@brauner Reviewed-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Aleksa Sarai <cyphar@cyphar.com> Message-Id: <20230802-vfs-super-exclusive-v2-4-95dc4e41b870@kernel.org> Signed-off-by: Christian Brauner <brauner@kernel.org>
2023-08-02 11:57:06 +00:00
if (user_ns != old->s_user_ns || fc->exclusive) {
spin_unlock(&sb_lock);
destroy_unused_super(s);
fs: add FSCONFIG_CMD_CREATE_EXCL Summary ======= This introduces FSCONFIG_CMD_CREATE_EXCL which will allows userspace to implement something like mount -t ext4 --exclusive /dev/sda /B which fails if a superblock for the requested filesystem does already exist: Before this patch ----------------- $ sudo ./move-mount -f xfs -o source=/dev/sda4 /A Requesting filesystem type xfs Mount options requested: source=/dev/sda4 Attaching mount at /A Moving single attached mount Setting key(source) with val(/dev/sda4) $ sudo ./move-mount -f xfs -o source=/dev/sda4 /B Requesting filesystem type xfs Mount options requested: source=/dev/sda4 Attaching mount at /B Moving single attached mount Setting key(source) with val(/dev/sda4) After this patch with --exclusive as a switch for FSCONFIG_CMD_CREATE_EXCL -------------------------------------------------------------------------- $ sudo ./move-mount -f xfs --exclusive -o source=/dev/sda4 /A Requesting filesystem type xfs Request exclusive superblock creation Mount options requested: source=/dev/sda4 Attaching mount at /A Moving single attached mount Setting key(source) with val(/dev/sda4) $ sudo ./move-mount -f xfs --exclusive -o source=/dev/sda4 /B Requesting filesystem type xfs Request exclusive superblock creation Mount options requested: source=/dev/sda4 Attaching mount at /B Moving single attached mount Setting key(source) with val(/dev/sda4) Device or resource busy | move-mount.c: 300: do_fsconfig: i xfs: reusing existing filesystem not allowed Details ======= As mentioned on the list (cf. [1]-[3]) mount requests like mount -t ext4 /dev/sda /A are ambigous for userspace. Either a new superblock has been created and mounted or an existing superblock has been reused and a bind-mount has been created. This becomes clear in the following example where two processes create the same mount for the same block device: P1 P2 fd_fs = fsopen("ext4"); fd_fs = fsopen("ext4"); fsconfig(fd_fs, FSCONFIG_SET_STRING, "source", "/dev/sda"); fsconfig(fd_fs, FSCONFIG_SET_STRING, "source", "/dev/sda"); fsconfig(fd_fs, FSCONFIG_SET_STRING, "dax", "always"); fsconfig(fd_fs, FSCONFIG_SET_STRING, "resuid", "1000"); // wins and creates superblock fsconfig(fd_fs, FSCONFIG_CMD_CREATE, ...) // finds compatible superblock of P1 // spins until P1 sets SB_BORN and grabs a reference fsconfig(fd_fs, FSCONFIG_CMD_CREATE, ...) fd_mnt1 = fsmount(fd_fs); fd_mnt2 = fsmount(fd_fs); move_mount(fd_mnt1, "/A") move_mount(fd_mnt2, "/B") Not just does P2 get a bind-mount but the mount options that P2 requestes are silently ignored. The VFS itself doesn't, can't and shouldn't enforce filesystem specific mount option compatibility. It only enforces incompatibility for read-only <-> read-write transitions: mount -t ext4 /dev/sda /A mount -t ext4 -o ro /dev/sda /B The read-only request will fail with EBUSY as the VFS can't just silently transition a superblock from read-write to read-only or vica versa without risking security issues. To userspace this silent superblock reuse can become a security issue in because there is currently no straightforward way for userspace to know that they did indeed manage to create a new superblock and didn't just reuse an existing one. This adds a new FSCONFIG_CMD_CREATE_EXCL command to fsconfig() that returns EBUSY if an existing superblock would be reused. Userspace that needs to be sure that it did create a new superblock with the requested mount options can request superblock creation using this command. If the command succeeds they can be sure that they did create a new superblock with the requested mount options. This requires the new mount api. With the old mount api it would be necessary to plumb this through every legacy filesystem's file_system_type->mount() method. If they want this feature they are most welcome to switch to the new mount api. Following is an analysis of the effect of FSCONFIG_CMD_CREATE_EXCL on each high-level superblock creation helper: (1) get_tree_nodev() Always allocate new superblock. Hence, FSCONFIG_CMD_CREATE and FSCONFIG_CMD_CREATE_EXCL are equivalent. The binderfs or overlayfs filesystems are examples. (4) get_tree_keyed() Finds an existing superblock based on sb->s_fs_info. Hence, FSCONFIG_CMD_CREATE would reuse an existing superblock whereas FSCONFIG_CMD_CREATE_EXCL would reject it with EBUSY. The mqueue or nfsd filesystems are examples. (2) get_tree_bdev() This effectively works like get_tree_keyed(). The ext4 or xfs filesystems are examples. (3) get_tree_single() Only one superblock of this filesystem type can ever exist. Hence, FSCONFIG_CMD_CREATE would reuse an existing superblock whereas FSCONFIG_CMD_CREATE_EXCL would reject it with EBUSY. The securityfs or configfs filesystems are examples. Note that some single-instance filesystems never destroy the superblock once it has been created during the first mount. For example, if securityfs has been mounted at least onces then the created superblock will never be destroyed again as long as there is still an LSM making use it. Consequently, even if securityfs is unmounted and the superblock seemingly destroyed it really isn't which means that FSCONFIG_CMD_CREATE_EXCL will continue rejecting reusing an existing superblock. This is acceptable thugh since special purpose filesystems such as this shouldn't have a need to use FSCONFIG_CMD_CREATE_EXCL anyway and if they do it's probably to make sure that mount options aren't ignored. Following is an analysis of the effect of FSCONFIG_CMD_CREATE_EXCL on filesystems that make use of the low-level sget_fc() helper directly. They're all effectively variants on get_tree_keyed(), get_tree_bdev(), or get_tree_nodev(): (5) mtd_get_sb() Similar logic to get_tree_keyed(). (6) afs_get_tree() Similar logic to get_tree_keyed(). (7) ceph_get_tree() Similar logic to get_tree_keyed(). Already explicitly allows forcing the allocation of a new superblock via CEPH_OPT_NOSHARE. This turns it into get_tree_nodev(). (8) fuse_get_tree_submount() Similar logic to get_tree_nodev(). (9) fuse_get_tree() Forces reuse of existing FUSE superblock. Forces reuse of existing superblock if passed in file refers to an existing FUSE connection. If FSCONFIG_CMD_CREATE_EXCL is specified together with an fd referring to an existing FUSE connections this would cause the superblock reusal to fail. If reusing is the intent then FSCONFIG_CMD_CREATE_EXCL shouldn't be specified. (10) fuse_get_tree() -> get_tree_nodev() Same logic as in get_tree_nodev(). (11) fuse_get_tree() -> get_tree_bdev() Same logic as in get_tree_bdev(). (12) virtio_fs_get_tree() Same logic as get_tree_keyed(). (13) gfs2_meta_get_tree() Forces reuse of existing gfs2 superblock. Mounting gfs2meta enforces that a gf2s superblock must already exist. If not, it will error out. Consequently, mounting gfs2meta with FSCONFIG_CMD_CREATE_EXCL would always fail. If reusing is the intent then FSCONFIG_CMD_CREATE_EXCL shouldn't be specified. (14) kernfs_get_tree() Similar logic to get_tree_keyed(). (15) nfs_get_tree_common() Similar logic to get_tree_keyed(). Already explicitly allows forcing the allocation of a new superblock via NFS_MOUNT_UNSHARED. This effectively turns it into get_tree_nodev(). Link: [1] https://lore.kernel.org/linux-block/20230704-fasching-wertarbeit-7c6ffb01c83d@brauner Link: [2] https://lore.kernel.org/linux-block/20230705-pumpwerk-vielversprechend-a4b1fd947b65@brauner Link: [3] https://lore.kernel.org/linux-fsdevel/20230725-einnahmen-warnschilder-17779aec0a97@brauner Reviewed-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Aleksa Sarai <cyphar@cyphar.com> Message-Id: <20230802-vfs-super-exclusive-v2-4-95dc4e41b870@kernel.org> Signed-off-by: Christian Brauner <brauner@kernel.org>
2023-08-02 11:57:06 +00:00
if (fc->exclusive)
warnfc(fc, "reusing existing filesystem not allowed");
else
warnfc(fc, "reusing existing filesystem in another namespace not allowed");
return ERR_PTR(-EBUSY);
}
if (!grab_super(old))
goto retry;
destroy_unused_super(s);
return old;
}
EXPORT_SYMBOL(sget_fc);
/**
* sget - find or create a superblock
* @type: filesystem type superblock should belong to
* @test: comparison callback
* @set: setup callback
* @flags: mount flags
* @data: argument to each of them
*/
struct super_block *sget(struct file_system_type *type,
int (*test)(struct super_block *,void *),
int (*set)(struct super_block *,void *),
int flags,
void *data)
{
struct user_namespace *user_ns = current_user_ns();
struct super_block *s = NULL;
struct super_block *old;
int err;
/* We don't yet pass the user namespace of the parent
* mount through to here so always use &init_user_ns
* until that changes.
*/
if (flags & SB_SUBMOUNT)
user_ns = &init_user_ns;
retry:
spin_lock(&sb_lock);
if (test) {
hlist: drop the node parameter from iterators I'm not sure why, but the hlist for each entry iterators were conceived list_for_each_entry(pos, head, member) The hlist ones were greedy and wanted an extra parameter: hlist_for_each_entry(tpos, pos, head, member) Why did they need an extra pos parameter? I'm not quite sure. Not only they don't really need it, it also prevents the iterator from looking exactly like the list iterator, which is unfortunate. Besides the semantic patch, there was some manual work required: - Fix up the actual hlist iterators in linux/list.h - Fix up the declaration of other iterators based on the hlist ones. - A very small amount of places were using the 'node' parameter, this was modified to use 'obj->member' instead. - Coccinelle didn't handle the hlist_for_each_entry_safe iterator properly, so those had to be fixed up manually. The semantic patch which is mostly the work of Peter Senna Tschudin is here: @@ iterator name hlist_for_each_entry, hlist_for_each_entry_continue, hlist_for_each_entry_from, hlist_for_each_entry_rcu, hlist_for_each_entry_rcu_bh, hlist_for_each_entry_continue_rcu_bh, for_each_busy_worker, ax25_uid_for_each, ax25_for_each, inet_bind_bucket_for_each, sctp_for_each_hentry, sk_for_each, sk_for_each_rcu, sk_for_each_from, sk_for_each_safe, sk_for_each_bound, hlist_for_each_entry_safe, hlist_for_each_entry_continue_rcu, nr_neigh_for_each, nr_neigh_for_each_safe, nr_node_for_each, nr_node_for_each_safe, for_each_gfn_indirect_valid_sp, for_each_gfn_sp, for_each_host; type T; expression a,c,d,e; identifier b; statement S; @@ -T b; <+... when != b ( hlist_for_each_entry(a, - b, c, d) S | hlist_for_each_entry_continue(a, - b, c) S | hlist_for_each_entry_from(a, - b, c) S | hlist_for_each_entry_rcu(a, - b, c, d) S | hlist_for_each_entry_rcu_bh(a, - b, c, d) S | hlist_for_each_entry_continue_rcu_bh(a, - b, c) S | for_each_busy_worker(a, c, - b, d) S | ax25_uid_for_each(a, - b, c) S | ax25_for_each(a, - b, c) S | inet_bind_bucket_for_each(a, - b, c) S | sctp_for_each_hentry(a, - b, c) S | sk_for_each(a, - b, c) S | sk_for_each_rcu(a, - b, c) S | sk_for_each_from -(a, b) +(a) S + sk_for_each_from(a) S | sk_for_each_safe(a, - b, c, d) S | sk_for_each_bound(a, - b, c) S | hlist_for_each_entry_safe(a, - b, c, d, e) S | hlist_for_each_entry_continue_rcu(a, - b, c) S | nr_neigh_for_each(a, - b, c) S | nr_neigh_for_each_safe(a, - b, c, d) S | nr_node_for_each(a, - b, c) S | nr_node_for_each_safe(a, - b, c, d) S | - for_each_gfn_sp(a, c, d, b) S + for_each_gfn_sp(a, c, d) S | - for_each_gfn_indirect_valid_sp(a, c, d, b) S + for_each_gfn_indirect_valid_sp(a, c, d) S | for_each_host(a, - b, c) S | for_each_host_safe(a, - b, c, d) S | for_each_mesh_entry(a, - b, c, d) S ) ...+> [akpm@linux-foundation.org: drop bogus change from net/ipv4/raw.c] [akpm@linux-foundation.org: drop bogus hunk from net/ipv6/raw.c] [akpm@linux-foundation.org: checkpatch fixes] [akpm@linux-foundation.org: fix warnings] [akpm@linux-foudnation.org: redo intrusive kvm changes] Tested-by: Peter Senna Tschudin <peter.senna@gmail.com> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: Sasha Levin <sasha.levin@oracle.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Gleb Natapov <gleb@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-28 01:06:00 +00:00
hlist_for_each_entry(old, &type->fs_supers, s_instances) {
if (!test(old, data))
continue;
fs: Add user namespace member to struct super_block Start marking filesystems with a user namespace owner, s_user_ns. In this change this is only used for permission checks of who may mount a filesystem. Ultimately s_user_ns will be used for translating ids and checking capabilities for filesystems mounted from user namespaces. The default policy for setting s_user_ns is implemented in sget(), which arranges for s_user_ns to be set to current_user_ns() and to ensure that the mounter of the filesystem has CAP_SYS_ADMIN in that user_ns. The guts of sget are split out into another function sget_userns(). The function sget_userns calls alloc_super with the specified user namespace or it verifies the existing superblock that was found has the expected user namespace, and fails with EBUSY when it is not. This failing prevents users with the wrong privileges mounting a filesystem. The reason for the split of sget_userns from sget is that in some cases such as mount_ns and kernfs_mount_ns a different policy for permission checking of mounts and setting s_user_ns is necessary, and the existence of sget_userns() allows those policies to be implemented. The helper mount_ns is expected to be used for filesystems such as proc and mqueuefs which present per namespace information. The function mount_ns is modified to call sget_userns instead of sget to ensure the user namespace owner of the namespace whose information is presented by the filesystem is used on the superblock. For sysfs and cgroup the appropriate permission checks are already in place, and kernfs_mount_ns is modified to call sget_userns so that the init_user_ns is the only user namespace used. For the cgroup filesystem cgroup namespace mounts are bind mounts of a subset of the full cgroup filesystem and as such s_user_ns must be the same for all of them as there is only a single superblock. Mounts of sysfs that vary based on the network namespace could in principle change s_user_ns but it keeps the analysis and implementation of kernfs simpler if that is not supported, and at present there appear to be no benefits from supporting a different s_user_ns on any sysfs mount. Getting the details of setting s_user_ns correct has been a long process. Thanks to Pavel Tikhorirorv who spotted a leak in sget_userns. Thanks to Seth Forshee who has kept the work alive. Thanks-to: Seth Forshee <seth.forshee@canonical.com> Thanks-to: Pavel Tikhomirov <ptikhomirov@virtuozzo.com> Acked-by: Seth Forshee <seth.forshee@canonical.com> Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2016-05-24 14:29:01 +00:00
if (user_ns != old->s_user_ns) {
spin_unlock(&sb_lock);
destroy_unused_super(s);
fs: Add user namespace member to struct super_block Start marking filesystems with a user namespace owner, s_user_ns. In this change this is only used for permission checks of who may mount a filesystem. Ultimately s_user_ns will be used for translating ids and checking capabilities for filesystems mounted from user namespaces. The default policy for setting s_user_ns is implemented in sget(), which arranges for s_user_ns to be set to current_user_ns() and to ensure that the mounter of the filesystem has CAP_SYS_ADMIN in that user_ns. The guts of sget are split out into another function sget_userns(). The function sget_userns calls alloc_super with the specified user namespace or it verifies the existing superblock that was found has the expected user namespace, and fails with EBUSY when it is not. This failing prevents users with the wrong privileges mounting a filesystem. The reason for the split of sget_userns from sget is that in some cases such as mount_ns and kernfs_mount_ns a different policy for permission checking of mounts and setting s_user_ns is necessary, and the existence of sget_userns() allows those policies to be implemented. The helper mount_ns is expected to be used for filesystems such as proc and mqueuefs which present per namespace information. The function mount_ns is modified to call sget_userns instead of sget to ensure the user namespace owner of the namespace whose information is presented by the filesystem is used on the superblock. For sysfs and cgroup the appropriate permission checks are already in place, and kernfs_mount_ns is modified to call sget_userns so that the init_user_ns is the only user namespace used. For the cgroup filesystem cgroup namespace mounts are bind mounts of a subset of the full cgroup filesystem and as such s_user_ns must be the same for all of them as there is only a single superblock. Mounts of sysfs that vary based on the network namespace could in principle change s_user_ns but it keeps the analysis and implementation of kernfs simpler if that is not supported, and at present there appear to be no benefits from supporting a different s_user_ns on any sysfs mount. Getting the details of setting s_user_ns correct has been a long process. Thanks to Pavel Tikhorirorv who spotted a leak in sget_userns. Thanks to Seth Forshee who has kept the work alive. Thanks-to: Seth Forshee <seth.forshee@canonical.com> Thanks-to: Pavel Tikhomirov <ptikhomirov@virtuozzo.com> Acked-by: Seth Forshee <seth.forshee@canonical.com> Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2016-05-24 14:29:01 +00:00
return ERR_PTR(-EBUSY);
}
if (!grab_super(old))
goto retry;
destroy_unused_super(s);
return old;
}
}
if (!s) {
spin_unlock(&sb_lock);
s = alloc_super(type, (flags & ~SB_SUBMOUNT), user_ns);
if (!s)
return ERR_PTR(-ENOMEM);
goto retry;
}
err = set(s, data);
if (err) {
spin_unlock(&sb_lock);
destroy_unused_super(s);
return ERR_PTR(err);
}
s->s_type = type;
strscpy(s->s_id, type->name, sizeof(s->s_id));
list_add_tail(&s->s_list, &super_blocks);
hlist_add_head(&s->s_instances, &type->fs_supers);
spin_unlock(&sb_lock);
get_filesystem(type);
fs: super: dynamically allocate the s_shrink In preparation for implementing lockless slab shrink, use new APIs to dynamically allocate the s_shrink, so that it can be freed asynchronously via RCU. Then it doesn't need to wait for RCU read-side critical section when releasing the struct super_block. Link: https://lkml.kernel.org/r/20230911094444.68966-39-zhengqi.arch@bytedance.com Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com> Reviewed-by: Muchun Song <songmuchun@bytedance.com> Acked-by: David Sterba <dsterba@suse.com> Cc: Chris Mason <clm@fb.com> Cc: Josef Bacik <josef@toxicpanda.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Christian Brauner <brauner@kernel.org> Cc: Abhinav Kumar <quic_abhinavk@quicinc.com> Cc: Alasdair Kergon <agk@redhat.com> Cc: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com> Cc: Andreas Dilger <adilger.kernel@dilger.ca> Cc: Andreas Gruenbacher <agruenba@redhat.com> Cc: Anna Schumaker <anna@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Bob Peterson <rpeterso@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Carlos Llamas <cmllamas@google.com> Cc: Chandan Babu R <chandan.babu@oracle.com> Cc: Chao Yu <chao@kernel.org> Cc: Christian Koenig <christian.koenig@amd.com> Cc: Chuck Lever <cel@kernel.org> Cc: Coly Li <colyli@suse.de> Cc: Dai Ngo <Dai.Ngo@oracle.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: "Darrick J. Wong" <djwong@kernel.org> Cc: Dave Chinner <david@fromorbit.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David Airlie <airlied@gmail.com> Cc: David Hildenbrand <david@redhat.com> Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Cc: Gao Xiang <hsiangkao@linux.alibaba.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Huang Rui <ray.huang@amd.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jaegeuk Kim <jaegeuk@kernel.org> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Jan Kara <jack@suse.cz> Cc: Jason Wang <jasowang@redhat.com> Cc: Jeff Layton <jlayton@kernel.org> Cc: Jeffle Xu <jefflexu@linux.alibaba.com> Cc: Joel Fernandes (Google) <joel@joelfernandes.org> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Juergen Gross <jgross@suse.com> Cc: Kent Overstreet <kent.overstreet@gmail.com> Cc: Kirill Tkhai <tkhai@ya.ru> Cc: Marijn Suijten <marijn.suijten@somainline.org> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Mike Snitzer <snitzer@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Muchun Song <muchun.song@linux.dev> Cc: Nadav Amit <namit@vmware.com> Cc: Neil Brown <neilb@suse.de> Cc: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com> Cc: Olga Kornievskaia <kolga@netapp.com> Cc: Paul E. McKenney <paulmck@kernel.org> Cc: Richard Weinberger <richard@nod.at> Cc: Rob Clark <robdclark@gmail.com> Cc: Rob Herring <robh@kernel.org> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: Sean Paul <sean@poorly.run> Cc: Sergey Senozhatsky <senozhatsky@chromium.org> Cc: Song Liu <song@kernel.org> Cc: Stefano Stabellini <sstabellini@kernel.org> Cc: Steven Price <steven.price@arm.com> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com> Cc: Tom Talpey <tom@talpey.com> Cc: Trond Myklebust <trond.myklebust@hammerspace.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Cc: Yue Hu <huyue2@coolpad.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-09-11 09:44:37 +00:00
shrinker_register(s->s_shrink);
return s;
}
EXPORT_SYMBOL(sget);
void drop_super(struct super_block *sb)
{
super_unlock_shared(sb);
put_super(sb);
}
EXPORT_SYMBOL(drop_super);
void drop_super_exclusive(struct super_block *sb)
{
super_unlock_excl(sb);
put_super(sb);
}
EXPORT_SYMBOL(drop_super_exclusive);
static void __iterate_supers(void (*f)(struct super_block *))
{
struct super_block *sb, *p = NULL;
spin_lock(&sb_lock);
list_for_each_entry(sb, &super_blocks, s_list) {
super: wait for nascent superblocks Recent patches experiment with making it possible to allocate a new superblock before opening the relevant block device. Naturally this has intricate side-effects that we get to learn about while developing this. Superblock allocators such as sget{_fc}() return with s_umount of the new superblock held and lock ordering currently requires that block level locks such as bdev_lock and open_mutex rank above s_umount. Before aca740cecbe5 ("fs: open block device after superblock creation") ordering was guaranteed to be correct as block devices were opened prior to superblock allocation and thus s_umount wasn't held. But now s_umount must be dropped before opening block devices to avoid locking violations. This has consequences. The main one being that iterators over @super_blocks and @fs_supers that grab a temporary reference to the superblock can now also grab s_umount before the caller has managed to open block devices and called fill_super(). So whereas before such iterators or concurrent mounts would have simply slept on s_umount until SB_BORN was set or the superblock was discard due to initalization failure they can now needlessly spin through sget{_fc}(). If the caller is sleeping on bdev_lock or open_mutex one caller waiting on SB_BORN will always spin somewhere and potentially this can go on for quite a while. It should be possible to drop s_umount while allowing iterators to wait on a nascent superblock to either be born or discarded. This patch implements a wait_var_event() mechanism allowing iterators to sleep until they are woken when the superblock is born or discarded. This also allows us to avoid relooping through @fs_supers and @super_blocks if a superblock isn't yet born or dying. Link: aca740cecbe5 ("fs: open block device after superblock creation") Reviewed-by: Jan Kara <jack@suse.cz> Message-Id: <20230818-vfs-super-fixes-v3-v3-3-9f0b1876e46b@kernel.org> Signed-off-by: Christian Brauner <brauner@kernel.org>
2023-08-18 14:00:50 +00:00
/* Pairs with memory marrier in super_wake(). */
if (smp_load_acquire(&sb->s_flags) & SB_DYING)
continue;
sb->s_count++;
spin_unlock(&sb_lock);
f(sb);
spin_lock(&sb_lock);
if (p)
__put_super(p);
p = sb;
}
if (p)
__put_super(p);
spin_unlock(&sb_lock);
}
/**
* iterate_supers - call function for all active superblocks
* @f: function to call
* @arg: argument to pass to it
*
* Scans the superblock list and calls given function, passing it
* locked superblock and given argument.
*/
void iterate_supers(void (*f)(struct super_block *, void *), void *arg)
{
struct super_block *sb, *p = NULL;
spin_lock(&sb_lock);
list_for_each_entry(sb, &super_blocks, s_list) {
bool locked;
super: wait for nascent superblocks Recent patches experiment with making it possible to allocate a new superblock before opening the relevant block device. Naturally this has intricate side-effects that we get to learn about while developing this. Superblock allocators such as sget{_fc}() return with s_umount of the new superblock held and lock ordering currently requires that block level locks such as bdev_lock and open_mutex rank above s_umount. Before aca740cecbe5 ("fs: open block device after superblock creation") ordering was guaranteed to be correct as block devices were opened prior to superblock allocation and thus s_umount wasn't held. But now s_umount must be dropped before opening block devices to avoid locking violations. This has consequences. The main one being that iterators over @super_blocks and @fs_supers that grab a temporary reference to the superblock can now also grab s_umount before the caller has managed to open block devices and called fill_super(). So whereas before such iterators or concurrent mounts would have simply slept on s_umount until SB_BORN was set or the superblock was discard due to initalization failure they can now needlessly spin through sget{_fc}(). If the caller is sleeping on bdev_lock or open_mutex one caller waiting on SB_BORN will always spin somewhere and potentially this can go on for quite a while. It should be possible to drop s_umount while allowing iterators to wait on a nascent superblock to either be born or discarded. This patch implements a wait_var_event() mechanism allowing iterators to sleep until they are woken when the superblock is born or discarded. This also allows us to avoid relooping through @fs_supers and @super_blocks if a superblock isn't yet born or dying. Link: aca740cecbe5 ("fs: open block device after superblock creation") Reviewed-by: Jan Kara <jack@suse.cz> Message-Id: <20230818-vfs-super-fixes-v3-v3-3-9f0b1876e46b@kernel.org> Signed-off-by: Christian Brauner <brauner@kernel.org>
2023-08-18 14:00:50 +00:00
sb->s_count++;
spin_unlock(&sb_lock);
locked = super_lock_shared(sb);
if (locked) {
if (sb->s_root)
f(sb, arg);
super_unlock_shared(sb);
}
spin_lock(&sb_lock);
if (p)
__put_super(p);
p = sb;
}
if (p)
__put_super(p);
spin_unlock(&sb_lock);
}
/**
* iterate_supers_type - call function for superblocks of given type
* @type: fs type
* @f: function to call
* @arg: argument to pass to it
*
* Scans the superblock list and calls given function, passing it
* locked superblock and given argument.
*/
void iterate_supers_type(struct file_system_type *type,
void (*f)(struct super_block *, void *), void *arg)
{
struct super_block *sb, *p = NULL;
spin_lock(&sb_lock);
hlist: drop the node parameter from iterators I'm not sure why, but the hlist for each entry iterators were conceived list_for_each_entry(pos, head, member) The hlist ones were greedy and wanted an extra parameter: hlist_for_each_entry(tpos, pos, head, member) Why did they need an extra pos parameter? I'm not quite sure. Not only they don't really need it, it also prevents the iterator from looking exactly like the list iterator, which is unfortunate. Besides the semantic patch, there was some manual work required: - Fix up the actual hlist iterators in linux/list.h - Fix up the declaration of other iterators based on the hlist ones. - A very small amount of places were using the 'node' parameter, this was modified to use 'obj->member' instead. - Coccinelle didn't handle the hlist_for_each_entry_safe iterator properly, so those had to be fixed up manually. The semantic patch which is mostly the work of Peter Senna Tschudin is here: @@ iterator name hlist_for_each_entry, hlist_for_each_entry_continue, hlist_for_each_entry_from, hlist_for_each_entry_rcu, hlist_for_each_entry_rcu_bh, hlist_for_each_entry_continue_rcu_bh, for_each_busy_worker, ax25_uid_for_each, ax25_for_each, inet_bind_bucket_for_each, sctp_for_each_hentry, sk_for_each, sk_for_each_rcu, sk_for_each_from, sk_for_each_safe, sk_for_each_bound, hlist_for_each_entry_safe, hlist_for_each_entry_continue_rcu, nr_neigh_for_each, nr_neigh_for_each_safe, nr_node_for_each, nr_node_for_each_safe, for_each_gfn_indirect_valid_sp, for_each_gfn_sp, for_each_host; type T; expression a,c,d,e; identifier b; statement S; @@ -T b; <+... when != b ( hlist_for_each_entry(a, - b, c, d) S | hlist_for_each_entry_continue(a, - b, c) S | hlist_for_each_entry_from(a, - b, c) S | hlist_for_each_entry_rcu(a, - b, c, d) S | hlist_for_each_entry_rcu_bh(a, - b, c, d) S | hlist_for_each_entry_continue_rcu_bh(a, - b, c) S | for_each_busy_worker(a, c, - b, d) S | ax25_uid_for_each(a, - b, c) S | ax25_for_each(a, - b, c) S | inet_bind_bucket_for_each(a, - b, c) S | sctp_for_each_hentry(a, - b, c) S | sk_for_each(a, - b, c) S | sk_for_each_rcu(a, - b, c) S | sk_for_each_from -(a, b) +(a) S + sk_for_each_from(a) S | sk_for_each_safe(a, - b, c, d) S | sk_for_each_bound(a, - b, c) S | hlist_for_each_entry_safe(a, - b, c, d, e) S | hlist_for_each_entry_continue_rcu(a, - b, c) S | nr_neigh_for_each(a, - b, c) S | nr_neigh_for_each_safe(a, - b, c, d) S | nr_node_for_each(a, - b, c) S | nr_node_for_each_safe(a, - b, c, d) S | - for_each_gfn_sp(a, c, d, b) S + for_each_gfn_sp(a, c, d) S | - for_each_gfn_indirect_valid_sp(a, c, d, b) S + for_each_gfn_indirect_valid_sp(a, c, d) S | for_each_host(a, - b, c) S | for_each_host_safe(a, - b, c, d) S | for_each_mesh_entry(a, - b, c, d) S ) ...+> [akpm@linux-foundation.org: drop bogus change from net/ipv4/raw.c] [akpm@linux-foundation.org: drop bogus hunk from net/ipv6/raw.c] [akpm@linux-foundation.org: checkpatch fixes] [akpm@linux-foundation.org: fix warnings] [akpm@linux-foudnation.org: redo intrusive kvm changes] Tested-by: Peter Senna Tschudin <peter.senna@gmail.com> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: Sasha Levin <sasha.levin@oracle.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Gleb Natapov <gleb@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-28 01:06:00 +00:00
hlist_for_each_entry(sb, &type->fs_supers, s_instances) {
bool locked;
super: wait for nascent superblocks Recent patches experiment with making it possible to allocate a new superblock before opening the relevant block device. Naturally this has intricate side-effects that we get to learn about while developing this. Superblock allocators such as sget{_fc}() return with s_umount of the new superblock held and lock ordering currently requires that block level locks such as bdev_lock and open_mutex rank above s_umount. Before aca740cecbe5 ("fs: open block device after superblock creation") ordering was guaranteed to be correct as block devices were opened prior to superblock allocation and thus s_umount wasn't held. But now s_umount must be dropped before opening block devices to avoid locking violations. This has consequences. The main one being that iterators over @super_blocks and @fs_supers that grab a temporary reference to the superblock can now also grab s_umount before the caller has managed to open block devices and called fill_super(). So whereas before such iterators or concurrent mounts would have simply slept on s_umount until SB_BORN was set or the superblock was discard due to initalization failure they can now needlessly spin through sget{_fc}(). If the caller is sleeping on bdev_lock or open_mutex one caller waiting on SB_BORN will always spin somewhere and potentially this can go on for quite a while. It should be possible to drop s_umount while allowing iterators to wait on a nascent superblock to either be born or discarded. This patch implements a wait_var_event() mechanism allowing iterators to sleep until they are woken when the superblock is born or discarded. This also allows us to avoid relooping through @fs_supers and @super_blocks if a superblock isn't yet born or dying. Link: aca740cecbe5 ("fs: open block device after superblock creation") Reviewed-by: Jan Kara <jack@suse.cz> Message-Id: <20230818-vfs-super-fixes-v3-v3-3-9f0b1876e46b@kernel.org> Signed-off-by: Christian Brauner <brauner@kernel.org>
2023-08-18 14:00:50 +00:00
sb->s_count++;
spin_unlock(&sb_lock);
locked = super_lock_shared(sb);
if (locked) {
if (sb->s_root)
f(sb, arg);
super_unlock_shared(sb);
}
spin_lock(&sb_lock);
if (p)
__put_super(p);
p = sb;
}
if (p)
__put_super(p);
spin_unlock(&sb_lock);
}
EXPORT_SYMBOL(iterate_supers_type);
struct super_block *user_get_super(dev_t dev, bool excl)
{
struct super_block *sb;
spin_lock(&sb_lock);
list_for_each_entry(sb, &super_blocks, s_list) {
if (sb->s_dev == dev) {
bool locked;
super: wait for nascent superblocks Recent patches experiment with making it possible to allocate a new superblock before opening the relevant block device. Naturally this has intricate side-effects that we get to learn about while developing this. Superblock allocators such as sget{_fc}() return with s_umount of the new superblock held and lock ordering currently requires that block level locks such as bdev_lock and open_mutex rank above s_umount. Before aca740cecbe5 ("fs: open block device after superblock creation") ordering was guaranteed to be correct as block devices were opened prior to superblock allocation and thus s_umount wasn't held. But now s_umount must be dropped before opening block devices to avoid locking violations. This has consequences. The main one being that iterators over @super_blocks and @fs_supers that grab a temporary reference to the superblock can now also grab s_umount before the caller has managed to open block devices and called fill_super(). So whereas before such iterators or concurrent mounts would have simply slept on s_umount until SB_BORN was set or the superblock was discard due to initalization failure they can now needlessly spin through sget{_fc}(). If the caller is sleeping on bdev_lock or open_mutex one caller waiting on SB_BORN will always spin somewhere and potentially this can go on for quite a while. It should be possible to drop s_umount while allowing iterators to wait on a nascent superblock to either be born or discarded. This patch implements a wait_var_event() mechanism allowing iterators to sleep until they are woken when the superblock is born or discarded. This also allows us to avoid relooping through @fs_supers and @super_blocks if a superblock isn't yet born or dying. Link: aca740cecbe5 ("fs: open block device after superblock creation") Reviewed-by: Jan Kara <jack@suse.cz> Message-Id: <20230818-vfs-super-fixes-v3-v3-3-9f0b1876e46b@kernel.org> Signed-off-by: Christian Brauner <brauner@kernel.org>
2023-08-18 14:00:50 +00:00
sb->s_count++;
spin_unlock(&sb_lock);
/* still alive? */
locked = super_lock(sb, excl);
if (locked) {
if (sb->s_root)
return sb;
super_unlock(sb, excl);
}
/* nope, got unmounted */
spin_lock(&sb_lock);
__put_super(sb);
super: wait for nascent superblocks Recent patches experiment with making it possible to allocate a new superblock before opening the relevant block device. Naturally this has intricate side-effects that we get to learn about while developing this. Superblock allocators such as sget{_fc}() return with s_umount of the new superblock held and lock ordering currently requires that block level locks such as bdev_lock and open_mutex rank above s_umount. Before aca740cecbe5 ("fs: open block device after superblock creation") ordering was guaranteed to be correct as block devices were opened prior to superblock allocation and thus s_umount wasn't held. But now s_umount must be dropped before opening block devices to avoid locking violations. This has consequences. The main one being that iterators over @super_blocks and @fs_supers that grab a temporary reference to the superblock can now also grab s_umount before the caller has managed to open block devices and called fill_super(). So whereas before such iterators or concurrent mounts would have simply slept on s_umount until SB_BORN was set or the superblock was discard due to initalization failure they can now needlessly spin through sget{_fc}(). If the caller is sleeping on bdev_lock or open_mutex one caller waiting on SB_BORN will always spin somewhere and potentially this can go on for quite a while. It should be possible to drop s_umount while allowing iterators to wait on a nascent superblock to either be born or discarded. This patch implements a wait_var_event() mechanism allowing iterators to sleep until they are woken when the superblock is born or discarded. This also allows us to avoid relooping through @fs_supers and @super_blocks if a superblock isn't yet born or dying. Link: aca740cecbe5 ("fs: open block device after superblock creation") Reviewed-by: Jan Kara <jack@suse.cz> Message-Id: <20230818-vfs-super-fixes-v3-v3-3-9f0b1876e46b@kernel.org> Signed-off-by: Christian Brauner <brauner@kernel.org>
2023-08-18 14:00:50 +00:00
break;
}
}
spin_unlock(&sb_lock);
return NULL;
}
/**
* reconfigure_super - asks filesystem to change superblock parameters
* @fc: The superblock and configuration
*
* Alters the configuration parameters of a live superblock.
*/
int reconfigure_super(struct fs_context *fc)
{
struct super_block *sb = fc->root->d_sb;
int retval;
bool remount_ro = false;
bool remount_rw = false;
bool force = fc->sb_flags & SB_FORCE;
if (fc->sb_flags_mask & ~MS_RMT_MASK)
return -EINVAL;
fs: Improve filesystem freezing handling vfs_check_frozen() tests are racy since the filesystem can be frozen just after the test is performed. Thus in write paths we can end up marking some pages or inodes dirty even though the file system is already frozen. This creates problems with flusher thread hanging on frozen filesystem. Another problem is that exclusion between ->page_mkwrite() and filesystem freezing has been handled by setting page dirty and then verifying s_frozen. This guaranteed that either the freezing code sees the faulted page, writes it, and writeprotects it again or we see s_frozen set and bail out of page fault. This works to protect from page being marked writeable while filesystem freezing is running but has an unpleasant artefact of leaving dirty (although unmodified and writeprotected) pages on frozen filesystem resulting in similar problems with flusher thread as the first problem. This patch aims at providing exclusion between write paths and filesystem freezing. We implement a writer-freeze read-write semaphore in the superblock. Actually, there are three such semaphores because of lock ranking reasons - one for page fault handlers (->page_mkwrite), one for all other writers, and one of internal filesystem purposes (used e.g. to track running transactions). Write paths which should block freezing (e.g. directory operations, ->aio_write(), ->page_mkwrite) hold reader side of the semaphore. Code freezing the filesystem takes the writer side. Only that we don't really want to bounce cachelines of the semaphores between CPUs for each write happening. So we implement the reader side of the semaphore as a per-cpu counter and the writer side is implemented using s_writers.frozen superblock field. [AV: microoptimize sb_start_write(); we want it fast in normal case] BugLink: https://bugs.launchpad.net/bugs/897421 Tested-by: Kamal Mostafa <kamal@canonical.com> Tested-by: Peter M. Petrakis <peter.petrakis@canonical.com> Tested-by: Dann Frazier <dann.frazier@canonical.com> Tested-by: Massimo Morana <massimo.morana@canonical.com> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-06-12 14:20:34 +00:00
if (sb->s_writers.frozen != SB_UNFROZEN)
return -EBUSY;
retval = security_sb_remount(sb, fc->security);
if (retval)
return retval;
if (fc->sb_flags_mask & SB_RDONLY) {
[PATCH] BLOCK: Make it possible to disable the block layer [try #6] Make it possible to disable the block layer. Not all embedded devices require it, some can make do with just JFFS2, NFS, ramfs, etc - none of which require the block layer to be present. This patch does the following: (*) Introduces CONFIG_BLOCK to disable the block layer, buffering and blockdev support. (*) Adds dependencies on CONFIG_BLOCK to any configuration item that controls an item that uses the block layer. This includes: (*) Block I/O tracing. (*) Disk partition code. (*) All filesystems that are block based, eg: Ext3, ReiserFS, ISOFS. (*) The SCSI layer. As far as I can tell, even SCSI chardevs use the block layer to do scheduling. Some drivers that use SCSI facilities - such as USB storage - end up disabled indirectly from this. (*) Various block-based device drivers, such as IDE and the old CDROM drivers. (*) MTD blockdev handling and FTL. (*) JFFS - which uses set_bdev_super(), something it could avoid doing by taking a leaf out of JFFS2's book. (*) Makes most of the contents of linux/blkdev.h, linux/buffer_head.h and linux/elevator.h contingent on CONFIG_BLOCK being set. sector_div() is, however, still used in places, and so is still available. (*) Also made contingent are the contents of linux/mpage.h, linux/genhd.h and parts of linux/fs.h. (*) Makes a number of files in fs/ contingent on CONFIG_BLOCK. (*) Makes mm/bounce.c (bounce buffering) contingent on CONFIG_BLOCK. (*) set_page_dirty() doesn't call __set_page_dirty_buffers() if CONFIG_BLOCK is not enabled. (*) fs/no-block.c is created to hold out-of-line stubs and things that are required when CONFIG_BLOCK is not set: (*) Default blockdev file operations (to give error ENODEV on opening). (*) Makes some /proc changes: (*) /proc/devices does not list any blockdevs. (*) /proc/diskstats and /proc/partitions are contingent on CONFIG_BLOCK. (*) Makes some compat ioctl handling contingent on CONFIG_BLOCK. (*) If CONFIG_BLOCK is not defined, makes sys_quotactl() return -ENODEV if given command other than Q_SYNC or if a special device is specified. (*) In init/do_mounts.c, no reference is made to the blockdev routines if CONFIG_BLOCK is not defined. This does not prohibit NFS roots or JFFS2. (*) The bdflush, ioprio_set and ioprio_get syscalls can now be absent (return error ENOSYS by way of cond_syscall if so). (*) The seclvl_bd_claim() and seclvl_bd_release() security calls do nothing if CONFIG_BLOCK is not set, since they can't then happen. Signed-Off-By: David Howells <dhowells@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2006-09-30 18:45:40 +00:00
#ifdef CONFIG_BLOCK
if (!(fc->sb_flags & SB_RDONLY) && sb->s_bdev &&
bdev_read_only(sb->s_bdev))
return -EACCES;
[PATCH] BLOCK: Make it possible to disable the block layer [try #6] Make it possible to disable the block layer. Not all embedded devices require it, some can make do with just JFFS2, NFS, ramfs, etc - none of which require the block layer to be present. This patch does the following: (*) Introduces CONFIG_BLOCK to disable the block layer, buffering and blockdev support. (*) Adds dependencies on CONFIG_BLOCK to any configuration item that controls an item that uses the block layer. This includes: (*) Block I/O tracing. (*) Disk partition code. (*) All filesystems that are block based, eg: Ext3, ReiserFS, ISOFS. (*) The SCSI layer. As far as I can tell, even SCSI chardevs use the block layer to do scheduling. Some drivers that use SCSI facilities - such as USB storage - end up disabled indirectly from this. (*) Various block-based device drivers, such as IDE and the old CDROM drivers. (*) MTD blockdev handling and FTL. (*) JFFS - which uses set_bdev_super(), something it could avoid doing by taking a leaf out of JFFS2's book. (*) Makes most of the contents of linux/blkdev.h, linux/buffer_head.h and linux/elevator.h contingent on CONFIG_BLOCK being set. sector_div() is, however, still used in places, and so is still available. (*) Also made contingent are the contents of linux/mpage.h, linux/genhd.h and parts of linux/fs.h. (*) Makes a number of files in fs/ contingent on CONFIG_BLOCK. (*) Makes mm/bounce.c (bounce buffering) contingent on CONFIG_BLOCK. (*) set_page_dirty() doesn't call __set_page_dirty_buffers() if CONFIG_BLOCK is not enabled. (*) fs/no-block.c is created to hold out-of-line stubs and things that are required when CONFIG_BLOCK is not set: (*) Default blockdev file operations (to give error ENODEV on opening). (*) Makes some /proc changes: (*) /proc/devices does not list any blockdevs. (*) /proc/diskstats and /proc/partitions are contingent on CONFIG_BLOCK. (*) Makes some compat ioctl handling contingent on CONFIG_BLOCK. (*) If CONFIG_BLOCK is not defined, makes sys_quotactl() return -ENODEV if given command other than Q_SYNC or if a special device is specified. (*) In init/do_mounts.c, no reference is made to the blockdev routines if CONFIG_BLOCK is not defined. This does not prohibit NFS roots or JFFS2. (*) The bdflush, ioprio_set and ioprio_get syscalls can now be absent (return error ENOSYS by way of cond_syscall if so). (*) The seclvl_bd_claim() and seclvl_bd_release() security calls do nothing if CONFIG_BLOCK is not set, since they can't then happen. Signed-Off-By: David Howells <dhowells@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2006-09-30 18:45:40 +00:00
#endif
remount_rw = !(fc->sb_flags & SB_RDONLY) && sb_rdonly(sb);
remount_ro = (fc->sb_flags & SB_RDONLY) && !sb_rdonly(sb);
}
2009-12-22 00:28:53 +00:00
if (remount_ro) {
if (!hlist_empty(&sb->s_pins)) {
super_unlock_excl(sb);
group_pin_kill(&sb->s_pins);
super: wait for nascent superblocks Recent patches experiment with making it possible to allocate a new superblock before opening the relevant block device. Naturally this has intricate side-effects that we get to learn about while developing this. Superblock allocators such as sget{_fc}() return with s_umount of the new superblock held and lock ordering currently requires that block level locks such as bdev_lock and open_mutex rank above s_umount. Before aca740cecbe5 ("fs: open block device after superblock creation") ordering was guaranteed to be correct as block devices were opened prior to superblock allocation and thus s_umount wasn't held. But now s_umount must be dropped before opening block devices to avoid locking violations. This has consequences. The main one being that iterators over @super_blocks and @fs_supers that grab a temporary reference to the superblock can now also grab s_umount before the caller has managed to open block devices and called fill_super(). So whereas before such iterators or concurrent mounts would have simply slept on s_umount until SB_BORN was set or the superblock was discard due to initalization failure they can now needlessly spin through sget{_fc}(). If the caller is sleeping on bdev_lock or open_mutex one caller waiting on SB_BORN will always spin somewhere and potentially this can go on for quite a while. It should be possible to drop s_umount while allowing iterators to wait on a nascent superblock to either be born or discarded. This patch implements a wait_var_event() mechanism allowing iterators to sleep until they are woken when the superblock is born or discarded. This also allows us to avoid relooping through @fs_supers and @super_blocks if a superblock isn't yet born or dying. Link: aca740cecbe5 ("fs: open block device after superblock creation") Reviewed-by: Jan Kara <jack@suse.cz> Message-Id: <20230818-vfs-super-fixes-v3-v3-3-9f0b1876e46b@kernel.org> Signed-off-by: Christian Brauner <brauner@kernel.org>
2023-08-18 14:00:50 +00:00
__super_lock_excl(sb);
if (!sb->s_root)
return 0;
if (sb->s_writers.frozen != SB_UNFROZEN)
return -EBUSY;
remount_ro = !sb_rdonly(sb);
}
}
shrink_dcache_sb(sb);
/* If we are reconfiguring to RDONLY and current sb is read/write,
* make sure there are no files open for writing.
*/
2009-12-22 00:28:53 +00:00
if (remount_ro) {
if (force) {
sb_start_ro_state_change(sb);
} else {
retval = sb_prepare_remount_readonly(sb);
if (retval)
return retval;
}
} else if (remount_rw) {
/*
* Protect filesystem's reconfigure code from writes from
* userspace until reconfigure finishes.
*/
sb_start_ro_state_change(sb);
}
if (fc->ops->reconfigure) {
retval = fc->ops->reconfigure(fc);
if (retval) {
if (!force)
goto cancel_readonly;
/* If forced remount, go ahead despite any errors */
WARN(1, "forced remount of a %s fs returned %i\n",
sb->s_type->name, retval);
}
}
WRITE_ONCE(sb->s_flags, ((sb->s_flags & ~fc->sb_flags_mask) |
(fc->sb_flags & fc->sb_flags_mask)));
sb_end_ro_state_change(sb);
2009-12-22 00:28:53 +00:00
/*
* Some filesystems modify their metadata via some other path than the
* bdev buffer cache (eg. use a private mapping, or directories in
* pagecache, etc). Also file data modifications go via their own
* mappings. So If we try to mount readonly then copy the filesystem
* from bdev, we could get stale data, so invalidate it to give a best
* effort at coherency.
*/
if (remount_ro && sb->s_bdev)
invalidate_bdev(sb->s_bdev);
return 0;
cancel_readonly:
sb_end_ro_state_change(sb);
return retval;
}
static void do_emergency_remount_callback(struct super_block *sb)
{
bool locked = super_lock_excl(sb);
super: wait for nascent superblocks Recent patches experiment with making it possible to allocate a new superblock before opening the relevant block device. Naturally this has intricate side-effects that we get to learn about while developing this. Superblock allocators such as sget{_fc}() return with s_umount of the new superblock held and lock ordering currently requires that block level locks such as bdev_lock and open_mutex rank above s_umount. Before aca740cecbe5 ("fs: open block device after superblock creation") ordering was guaranteed to be correct as block devices were opened prior to superblock allocation and thus s_umount wasn't held. But now s_umount must be dropped before opening block devices to avoid locking violations. This has consequences. The main one being that iterators over @super_blocks and @fs_supers that grab a temporary reference to the superblock can now also grab s_umount before the caller has managed to open block devices and called fill_super(). So whereas before such iterators or concurrent mounts would have simply slept on s_umount until SB_BORN was set or the superblock was discard due to initalization failure they can now needlessly spin through sget{_fc}(). If the caller is sleeping on bdev_lock or open_mutex one caller waiting on SB_BORN will always spin somewhere and potentially this can go on for quite a while. It should be possible to drop s_umount while allowing iterators to wait on a nascent superblock to either be born or discarded. This patch implements a wait_var_event() mechanism allowing iterators to sleep until they are woken when the superblock is born or discarded. This also allows us to avoid relooping through @fs_supers and @super_blocks if a superblock isn't yet born or dying. Link: aca740cecbe5 ("fs: open block device after superblock creation") Reviewed-by: Jan Kara <jack@suse.cz> Message-Id: <20230818-vfs-super-fixes-v3-v3-3-9f0b1876e46b@kernel.org> Signed-off-by: Christian Brauner <brauner@kernel.org>
2023-08-18 14:00:50 +00:00
if (locked && sb->s_root && sb->s_bdev && !sb_rdonly(sb)) {
struct fs_context *fc;
fc = fs_context_for_reconfigure(sb->s_root,
SB_RDONLY | SB_FORCE, SB_RDONLY);
if (!IS_ERR(fc)) {
if (parse_monolithic_mount_data(fc, NULL) == 0)
(void)reconfigure_super(fc);
put_fs_context(fc);
}
}
if (locked)
super_unlock_excl(sb);
}
static void do_emergency_remount(struct work_struct *work)
{
__iterate_supers(do_emergency_remount_callback);
kfree(work);
printk("Emergency Remount complete\n");
}
void emergency_remount(void)
{
struct work_struct *work;
work = kmalloc(sizeof(*work), GFP_ATOMIC);
if (work) {
INIT_WORK(work, do_emergency_remount);
schedule_work(work);
}
}
static void do_thaw_all_callback(struct super_block *sb)
{
bool locked = super_lock_excl(sb);
super: wait for nascent superblocks Recent patches experiment with making it possible to allocate a new superblock before opening the relevant block device. Naturally this has intricate side-effects that we get to learn about while developing this. Superblock allocators such as sget{_fc}() return with s_umount of the new superblock held and lock ordering currently requires that block level locks such as bdev_lock and open_mutex rank above s_umount. Before aca740cecbe5 ("fs: open block device after superblock creation") ordering was guaranteed to be correct as block devices were opened prior to superblock allocation and thus s_umount wasn't held. But now s_umount must be dropped before opening block devices to avoid locking violations. This has consequences. The main one being that iterators over @super_blocks and @fs_supers that grab a temporary reference to the superblock can now also grab s_umount before the caller has managed to open block devices and called fill_super(). So whereas before such iterators or concurrent mounts would have simply slept on s_umount until SB_BORN was set or the superblock was discard due to initalization failure they can now needlessly spin through sget{_fc}(). If the caller is sleeping on bdev_lock or open_mutex one caller waiting on SB_BORN will always spin somewhere and potentially this can go on for quite a while. It should be possible to drop s_umount while allowing iterators to wait on a nascent superblock to either be born or discarded. This patch implements a wait_var_event() mechanism allowing iterators to sleep until they are woken when the superblock is born or discarded. This also allows us to avoid relooping through @fs_supers and @super_blocks if a superblock isn't yet born or dying. Link: aca740cecbe5 ("fs: open block device after superblock creation") Reviewed-by: Jan Kara <jack@suse.cz> Message-Id: <20230818-vfs-super-fixes-v3-v3-3-9f0b1876e46b@kernel.org> Signed-off-by: Christian Brauner <brauner@kernel.org>
2023-08-18 14:00:50 +00:00
if (locked && sb->s_root) {
if (IS_ENABLED(CONFIG_BLOCK))
while (sb->s_bdev && !bdev_thaw(sb->s_bdev))
pr_warn("Emergency Thaw on %pg\n", sb->s_bdev);
thaw_super_locked(sb, FREEZE_HOLDER_USERSPACE);
return;
}
if (locked)
super_unlock_excl(sb);
}
static void do_thaw_all(struct work_struct *work)
{
__iterate_supers(do_thaw_all_callback);
kfree(work);
printk(KERN_WARNING "Emergency Thaw complete\n");
}
/**
* emergency_thaw_all -- forcibly thaw every frozen filesystem
*
* Used for emergency unfreeze of all filesystems via SysRq
*/
void emergency_thaw_all(void)
{
struct work_struct *work;
work = kmalloc(sizeof(*work), GFP_ATOMIC);
if (work) {
INIT_WORK(work, do_thaw_all);
schedule_work(work);
}
}
static DEFINE_IDA(unnamed_dev_ida);
/**
* get_anon_bdev - Allocate a block device for filesystems which don't have one.
* @p: Pointer to a dev_t.
*
* Filesystems which don't use real block devices can call this function
* to allocate a virtual block device.
*
* Context: Any context. Frequently called while holding sb_lock.
* Return: 0 on success, -EMFILE if there are no anonymous bdevs left
* or -ENOMEM if memory allocation failed.
*/
int get_anon_bdev(dev_t *p)
{
int dev;
/*
* Many userspace utilities consider an FSID of 0 invalid.
* Always return at least 1 from get_anon_bdev.
*/
dev = ida_alloc_range(&unnamed_dev_ida, 1, (1 << MINORBITS) - 1,
GFP_ATOMIC);
if (dev == -ENOSPC)
dev = -EMFILE;
if (dev < 0)
return dev;
*p = MKDEV(0, dev);
return 0;
}
EXPORT_SYMBOL(get_anon_bdev);
void free_anon_bdev(dev_t dev)
{
ida_free(&unnamed_dev_ida, MINOR(dev));
}
EXPORT_SYMBOL(free_anon_bdev);
int set_anon_super(struct super_block *s, void *data)
{
return get_anon_bdev(&s->s_dev);
}
EXPORT_SYMBOL(set_anon_super);
void kill_anon_super(struct super_block *sb)
{
dev_t dev = sb->s_dev;
generic_shutdown_super(sb);
super: ensure valid info For keyed filesystems that recycle superblocks based on s_fs_info or information contained therein s_fs_info must be kept as long as the superblock is on the filesystem type super list. This isn't guaranteed as s_fs_info will be freed latest in sb->kill_sb(). The fix is simply to perform notification and list removal in kill_anon_super(). Any filesystem needs to free s_fs_info after they call the kill_*() helpers. If they don't they risk use-after-free right now so fixing it here is guaranteed that s_fs_info remain valid. For block backed filesystems notifying in pass sb->kill_sb() in deactivate_locked_super() remains unproblematic and is required because multiple other block devices can be shut down after kill_block_super() has been called from a filesystem's sb->kill_sb() handler. For example, ext4 and xfs close additional devices. Block based filesystems don't depend on s_fs_info (btrfs does use s_fs_info but also uses kill_anon_super() and not kill_block_super().). Sorry for that braino. Goal should be to unify this behavior during this cycle obviously. But let's please do a simple bugfix now. Fixes: 2c18a63b760a ("super: wait until we passed kill super") Fixes: syzbot+5b64180f8d9e39d3f061@syzkaller.appspotmail.com Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Christoph Hellwig <hch@lst.de> Reported-by: syzbot+5b64180f8d9e39d3f061@syzkaller.appspotmail.com Message-Id: <20230828-vfs-super-fixes-v1-2-b37a4a04a88f@kernel.org> Signed-off-by: Christian Brauner <brauner@kernel.org>
2023-08-28 11:26:24 +00:00
kill_super_notify(sb);
free_anon_bdev(dev);
}
EXPORT_SYMBOL(kill_anon_super);
void kill_litter_super(struct super_block *sb)
{
if (sb->s_root)
d_genocide(sb->s_root);
kill_anon_super(sb);
}
EXPORT_SYMBOL(kill_litter_super);
int set_anon_super_fc(struct super_block *sb, struct fs_context *fc)
{
return set_anon_super(sb, NULL);
}
EXPORT_SYMBOL(set_anon_super_fc);
static int test_keyed_super(struct super_block *sb, struct fs_context *fc)
{
return sb->s_fs_info == fc->s_fs_info;
}
static int test_single_super(struct super_block *s, struct fs_context *fc)
{
return 1;
}
static int vfs_get_super(struct fs_context *fc,
int (*test)(struct super_block *, struct fs_context *),
int (*fill_super)(struct super_block *sb,
struct fs_context *fc))
{
struct super_block *sb;
int err;
sb = sget_fc(fc, test, set_anon_super_fc);
if (IS_ERR(sb))
return PTR_ERR(sb);
if (!sb->s_root) {
err = fill_super(sb, fc);
if (err)
goto error;
sb->s_flags |= SB_ACTIVE;
}
fc->root = dget(sb->s_root);
return 0;
error:
deactivate_locked_super(sb);
return err;
}
int get_tree_nodev(struct fs_context *fc,
int (*fill_super)(struct super_block *sb,
struct fs_context *fc))
{
return vfs_get_super(fc, NULL, fill_super);
}
EXPORT_SYMBOL(get_tree_nodev);
int get_tree_single(struct fs_context *fc,
int (*fill_super)(struct super_block *sb,
struct fs_context *fc))
{
return vfs_get_super(fc, test_single_super, fill_super);
}
EXPORT_SYMBOL(get_tree_single);
int get_tree_keyed(struct fs_context *fc,
int (*fill_super)(struct super_block *sb,
struct fs_context *fc),
void *key)
{
fc->s_fs_info = key;
return vfs_get_super(fc, test_keyed_super, fill_super);
}
EXPORT_SYMBOL(get_tree_keyed);
static int set_bdev_super(struct super_block *s, void *data)
{
s->s_dev = *(dev_t *)data;
return 0;
}
static int super_s_dev_set(struct super_block *s, struct fs_context *fc)
{
return set_bdev_super(s, fc->sget_key);
}
static int super_s_dev_test(struct super_block *s, struct fs_context *fc)
{
return !(s->s_iflags & SB_I_RETIRED) &&
s->s_dev == *(dev_t *)fc->sget_key;
}
/**
* sget_dev - Find or create a superblock by device number
* @fc: Filesystem context.
* @dev: device number
*
* Find or create a superblock using the provided device number that
* will be stored in fc->sget_key.
*
* If an extant superblock is matched, then that will be returned with
* an elevated reference count that the caller must transfer or discard.
*
* If no match is made, a new superblock will be allocated and basic
* initialisation will be performed (s_type, s_fs_info, s_id, s_dev will
* be set). The superblock will be published and it will be returned in
* a partially constructed state with SB_BORN and SB_ACTIVE as yet
* unset.
*
* Return: an existing or newly created superblock on success, an error
* pointer on failure.
*/
struct super_block *sget_dev(struct fs_context *fc, dev_t dev)
{
fc->sget_key = &dev;
return sget_fc(fc, super_s_dev_test, super_s_dev_set);
}
EXPORT_SYMBOL(sget_dev);
[PATCH] BLOCK: Make it possible to disable the block layer [try #6] Make it possible to disable the block layer. Not all embedded devices require it, some can make do with just JFFS2, NFS, ramfs, etc - none of which require the block layer to be present. This patch does the following: (*) Introduces CONFIG_BLOCK to disable the block layer, buffering and blockdev support. (*) Adds dependencies on CONFIG_BLOCK to any configuration item that controls an item that uses the block layer. This includes: (*) Block I/O tracing. (*) Disk partition code. (*) All filesystems that are block based, eg: Ext3, ReiserFS, ISOFS. (*) The SCSI layer. As far as I can tell, even SCSI chardevs use the block layer to do scheduling. Some drivers that use SCSI facilities - such as USB storage - end up disabled indirectly from this. (*) Various block-based device drivers, such as IDE and the old CDROM drivers. (*) MTD blockdev handling and FTL. (*) JFFS - which uses set_bdev_super(), something it could avoid doing by taking a leaf out of JFFS2's book. (*) Makes most of the contents of linux/blkdev.h, linux/buffer_head.h and linux/elevator.h contingent on CONFIG_BLOCK being set. sector_div() is, however, still used in places, and so is still available. (*) Also made contingent are the contents of linux/mpage.h, linux/genhd.h and parts of linux/fs.h. (*) Makes a number of files in fs/ contingent on CONFIG_BLOCK. (*) Makes mm/bounce.c (bounce buffering) contingent on CONFIG_BLOCK. (*) set_page_dirty() doesn't call __set_page_dirty_buffers() if CONFIG_BLOCK is not enabled. (*) fs/no-block.c is created to hold out-of-line stubs and things that are required when CONFIG_BLOCK is not set: (*) Default blockdev file operations (to give error ENODEV on opening). (*) Makes some /proc changes: (*) /proc/devices does not list any blockdevs. (*) /proc/diskstats and /proc/partitions are contingent on CONFIG_BLOCK. (*) Makes some compat ioctl handling contingent on CONFIG_BLOCK. (*) If CONFIG_BLOCK is not defined, makes sys_quotactl() return -ENODEV if given command other than Q_SYNC or if a special device is specified. (*) In init/do_mounts.c, no reference is made to the blockdev routines if CONFIG_BLOCK is not defined. This does not prohibit NFS roots or JFFS2. (*) The bdflush, ioprio_set and ioprio_get syscalls can now be absent (return error ENOSYS by way of cond_syscall if so). (*) The seclvl_bd_claim() and seclvl_bd_release() security calls do nothing if CONFIG_BLOCK is not set, since they can't then happen. Signed-Off-By: David Howells <dhowells@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2006-09-30 18:45:40 +00:00
#ifdef CONFIG_BLOCK
/*
* Lock the superblock that is holder of the bdev. Returns the superblock
* pointer if we successfully locked the superblock and it is alive. Otherwise
* we return NULL and just unlock bdev->bd_holder_lock.
*
* The function must be called with bdev->bd_holder_lock and releases it.
*/
static struct super_block *bdev_super_lock(struct block_device *bdev, bool excl)
__releases(&bdev->bd_holder_lock)
{
struct super_block *sb = bdev->bd_holder;
bool locked;
lockdep_assert_held(&bdev->bd_holder_lock);
lockdep_assert_not_held(&sb->s_umount);
lockdep_assert_not_held(&bdev->bd_disk->open_mutex);
/* Make sure sb doesn't go away from under us */
spin_lock(&sb_lock);
sb->s_count++;
spin_unlock(&sb_lock);
mutex_unlock(&bdev->bd_holder_lock);
locked = super_lock(sb, excl);
/*
* If the superblock wasn't already SB_DYING then we hold
* s_umount and can safely drop our temporary reference.
*/
put_super(sb);
if (!locked)
return NULL;
if (!sb->s_root || !(sb->s_flags & SB_ACTIVE)) {
super_unlock(sb, excl);
return NULL;
}
return sb;
}
static void fs_bdev_mark_dead(struct block_device *bdev, bool surprise)
{
struct super_block *sb;
sb = bdev_super_lock(bdev, false);
if (!sb)
return;
if (!surprise)
sync_filesystem(sb);
shrink_dcache_sb(sb);
invalidate_inodes(sb);
if (sb->s_op->shutdown)
sb->s_op->shutdown(sb);
super_unlock_shared(sb);
}
static void fs_bdev_sync(struct block_device *bdev)
{
struct super_block *sb;
sb = bdev_super_lock(bdev, false);
if (!sb)
return;
sync_filesystem(sb);
super_unlock_shared(sb);
}
static struct super_block *get_bdev_super(struct block_device *bdev)
{
bool active = false;
struct super_block *sb;
sb = bdev_super_lock(bdev, true);
if (sb) {
active = atomic_inc_not_zero(&sb->s_active);
super_unlock_excl(sb);
}
if (!active)
return NULL;
return sb;
}
static int fs_bdev_freeze(struct block_device *bdev)
{
struct super_block *sb;
int error = 0;
lockdep_assert_held(&bdev->bd_fsfreeze_mutex);
sb = get_bdev_super(bdev);
if (!sb)
return -EINVAL;
if (sb->s_op->freeze_super)
error = sb->s_op->freeze_super(sb, FREEZE_HOLDER_USERSPACE);
else
error = freeze_super(sb, FREEZE_HOLDER_USERSPACE);
if (!error)
error = sync_blockdev(bdev);
deactivate_super(sb);
return error;
}
static int fs_bdev_thaw(struct block_device *bdev)
{
struct super_block *sb;
int error;
lockdep_assert_held(&bdev->bd_fsfreeze_mutex);
sb = get_bdev_super(bdev);
if (WARN_ON_ONCE(!sb))
return -EINVAL;
if (sb->s_op->thaw_super)
error = sb->s_op->thaw_super(sb, FREEZE_HOLDER_USERSPACE);
else
error = thaw_super(sb, FREEZE_HOLDER_USERSPACE);
deactivate_super(sb);
return error;
}
const struct blk_holder_ops fs_holder_ops = {
.mark_dead = fs_bdev_mark_dead,
.sync = fs_bdev_sync,
.freeze = fs_bdev_freeze,
.thaw = fs_bdev_thaw,
};
EXPORT_SYMBOL_GPL(fs_holder_ops);
int setup_bdev_super(struct super_block *sb, int sb_flags,
struct fs_context *fc)
{
blk_mode_t mode = sb_open_mode(sb_flags);
struct bdev_handle *bdev_handle;
struct block_device *bdev;
bdev_handle = bdev_open_by_dev(sb->s_dev, mode, sb, &fs_holder_ops);
if (IS_ERR(bdev_handle)) {
if (fc)
errorf(fc, "%s: Can't open blockdev", fc->source);
return PTR_ERR(bdev_handle);
}
bdev = bdev_handle->bdev;
/*
* This really should be in blkdev_get_by_dev, but right now can't due
* to legacy issues that require us to allow opening a block device node
* writable from userspace even for a read-only block device.
*/
if ((mode & BLK_OPEN_WRITE) && bdev_read_only(bdev)) {
bdev_release(bdev_handle);
return -EACCES;
}
/*
* It is enough to check bdev was not frozen before we set
* s_bdev as freezing will wait until SB_BORN is set.
*/
if (atomic_read(&bdev->bd_fsfreeze_count) > 0) {
if (fc)
warnf(fc, "%pg: Can't mount, blockdev is frozen", bdev);
bdev_release(bdev_handle);
return -EBUSY;
}
spin_lock(&sb_lock);
sb->s_bdev_handle = bdev_handle;
sb->s_bdev = bdev;
sb->s_bdi = bdi_get(bdev->bd_disk->bdi);
if (bdev_stable_writes(bdev))
sb->s_iflags |= SB_I_STABLE_WRITES;
spin_unlock(&sb_lock);
snprintf(sb->s_id, sizeof(sb->s_id), "%pg", bdev);
fs: super: dynamically allocate the s_shrink In preparation for implementing lockless slab shrink, use new APIs to dynamically allocate the s_shrink, so that it can be freed asynchronously via RCU. Then it doesn't need to wait for RCU read-side critical section when releasing the struct super_block. Link: https://lkml.kernel.org/r/20230911094444.68966-39-zhengqi.arch@bytedance.com Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com> Reviewed-by: Muchun Song <songmuchun@bytedance.com> Acked-by: David Sterba <dsterba@suse.com> Cc: Chris Mason <clm@fb.com> Cc: Josef Bacik <josef@toxicpanda.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Christian Brauner <brauner@kernel.org> Cc: Abhinav Kumar <quic_abhinavk@quicinc.com> Cc: Alasdair Kergon <agk@redhat.com> Cc: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com> Cc: Andreas Dilger <adilger.kernel@dilger.ca> Cc: Andreas Gruenbacher <agruenba@redhat.com> Cc: Anna Schumaker <anna@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Bob Peterson <rpeterso@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Carlos Llamas <cmllamas@google.com> Cc: Chandan Babu R <chandan.babu@oracle.com> Cc: Chao Yu <chao@kernel.org> Cc: Christian Koenig <christian.koenig@amd.com> Cc: Chuck Lever <cel@kernel.org> Cc: Coly Li <colyli@suse.de> Cc: Dai Ngo <Dai.Ngo@oracle.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: "Darrick J. Wong" <djwong@kernel.org> Cc: Dave Chinner <david@fromorbit.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David Airlie <airlied@gmail.com> Cc: David Hildenbrand <david@redhat.com> Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Cc: Gao Xiang <hsiangkao@linux.alibaba.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Huang Rui <ray.huang@amd.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jaegeuk Kim <jaegeuk@kernel.org> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Jan Kara <jack@suse.cz> Cc: Jason Wang <jasowang@redhat.com> Cc: Jeff Layton <jlayton@kernel.org> Cc: Jeffle Xu <jefflexu@linux.alibaba.com> Cc: Joel Fernandes (Google) <joel@joelfernandes.org> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Juergen Gross <jgross@suse.com> Cc: Kent Overstreet <kent.overstreet@gmail.com> Cc: Kirill Tkhai <tkhai@ya.ru> Cc: Marijn Suijten <marijn.suijten@somainline.org> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Mike Snitzer <snitzer@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Muchun Song <muchun.song@linux.dev> Cc: Nadav Amit <namit@vmware.com> Cc: Neil Brown <neilb@suse.de> Cc: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com> Cc: Olga Kornievskaia <kolga@netapp.com> Cc: Paul E. McKenney <paulmck@kernel.org> Cc: Richard Weinberger <richard@nod.at> Cc: Rob Clark <robdclark@gmail.com> Cc: Rob Herring <robh@kernel.org> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: Sean Paul <sean@poorly.run> Cc: Sergey Senozhatsky <senozhatsky@chromium.org> Cc: Song Liu <song@kernel.org> Cc: Stefano Stabellini <sstabellini@kernel.org> Cc: Steven Price <steven.price@arm.com> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com> Cc: Tom Talpey <tom@talpey.com> Cc: Trond Myklebust <trond.myklebust@hammerspace.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Xuan Zhuo <xuanzhuo@linux.alibaba.com> Cc: Yue Hu <huyue2@coolpad.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2023-09-11 09:44:37 +00:00
shrinker_debugfs_rename(sb->s_shrink, "sb-%s:%s", sb->s_type->name,
sb->s_id);
sb_set_blocksize(sb, block_size(bdev));
return 0;
}
EXPORT_SYMBOL_GPL(setup_bdev_super);
/**
* get_tree_bdev - Get a superblock based on a single block device
* @fc: The filesystem context holding the parameters
* @fill_super: Helper to initialise a new superblock
*/
int get_tree_bdev(struct fs_context *fc,
int (*fill_super)(struct super_block *,
struct fs_context *))
{
struct super_block *s;
int error = 0;
dev_t dev;
if (!fc->source)
return invalf(fc, "No source specified");
error = lookup_bdev(fc->source, &dev);
if (error) {
errorf(fc, "%s: Can't lookup blockdev", fc->source);
return error;
}
fc->sb_flags |= SB_NOSEC;
s = sget_dev(fc, dev);
if (IS_ERR(s))
return PTR_ERR(s);
if (s->s_root) {
/* Don't summarily change the RO/RW state. */
if ((fc->sb_flags ^ s->s_flags) & SB_RDONLY) {
warnf(fc, "%pg: Can't mount, would change RO state", s->s_bdev);
deactivate_locked_super(s);
return -EBUSY;
}
} else {
/*
* We drop s_umount here because we need to open the bdev and
* bdev->open_mutex ranks above s_umount (blkdev_put() ->
* bdev_mark_dead()). It is safe because we have active sb
* reference and SB_BORN is not set yet.
*/
super_unlock_excl(s);
error = setup_bdev_super(s, fc->sb_flags, fc);
super: wait for nascent superblocks Recent patches experiment with making it possible to allocate a new superblock before opening the relevant block device. Naturally this has intricate side-effects that we get to learn about while developing this. Superblock allocators such as sget{_fc}() return with s_umount of the new superblock held and lock ordering currently requires that block level locks such as bdev_lock and open_mutex rank above s_umount. Before aca740cecbe5 ("fs: open block device after superblock creation") ordering was guaranteed to be correct as block devices were opened prior to superblock allocation and thus s_umount wasn't held. But now s_umount must be dropped before opening block devices to avoid locking violations. This has consequences. The main one being that iterators over @super_blocks and @fs_supers that grab a temporary reference to the superblock can now also grab s_umount before the caller has managed to open block devices and called fill_super(). So whereas before such iterators or concurrent mounts would have simply slept on s_umount until SB_BORN was set or the superblock was discard due to initalization failure they can now needlessly spin through sget{_fc}(). If the caller is sleeping on bdev_lock or open_mutex one caller waiting on SB_BORN will always spin somewhere and potentially this can go on for quite a while. It should be possible to drop s_umount while allowing iterators to wait on a nascent superblock to either be born or discarded. This patch implements a wait_var_event() mechanism allowing iterators to sleep until they are woken when the superblock is born or discarded. This also allows us to avoid relooping through @fs_supers and @super_blocks if a superblock isn't yet born or dying. Link: aca740cecbe5 ("fs: open block device after superblock creation") Reviewed-by: Jan Kara <jack@suse.cz> Message-Id: <20230818-vfs-super-fixes-v3-v3-3-9f0b1876e46b@kernel.org> Signed-off-by: Christian Brauner <brauner@kernel.org>
2023-08-18 14:00:50 +00:00
__super_lock_excl(s);
if (!error)
error = fill_super(s, fc);
if (error) {
deactivate_locked_super(s);
return error;
}
s->s_flags |= SB_ACTIVE;
}
BUG_ON(fc->root);
fc->root = dget(s->s_root);
return 0;
}
EXPORT_SYMBOL(get_tree_bdev);
static int test_bdev_super(struct super_block *s, void *data)
{
return !(s->s_iflags & SB_I_RETIRED) && s->s_dev == *(dev_t *)data;
}
struct dentry *mount_bdev(struct file_system_type *fs_type,
int flags, const char *dev_name, void *data,
int (*fill_super)(struct super_block *, void *, int))
{
struct super_block *s;
int error;
dev_t dev;
error = lookup_bdev(dev_name, &dev);
if (error)
return ERR_PTR(error);
flags |= SB_NOSEC;
s = sget(fs_type, test_bdev_super, set_bdev_super, flags, &dev);
if (IS_ERR(s))
return ERR_CAST(s);
if (s->s_root) {
if ((flags ^ s->s_flags) & SB_RDONLY) {
deactivate_locked_super(s);
return ERR_PTR(-EBUSY);
}
} else {
/*
* We drop s_umount here because we need to open the bdev and
* bdev->open_mutex ranks above s_umount (blkdev_put() ->
* bdev_mark_dead()). It is safe because we have active sb
* reference and SB_BORN is not set yet.
*/
super_unlock_excl(s);
error = setup_bdev_super(s, flags, NULL);
super: wait for nascent superblocks Recent patches experiment with making it possible to allocate a new superblock before opening the relevant block device. Naturally this has intricate side-effects that we get to learn about while developing this. Superblock allocators such as sget{_fc}() return with s_umount of the new superblock held and lock ordering currently requires that block level locks such as bdev_lock and open_mutex rank above s_umount. Before aca740cecbe5 ("fs: open block device after superblock creation") ordering was guaranteed to be correct as block devices were opened prior to superblock allocation and thus s_umount wasn't held. But now s_umount must be dropped before opening block devices to avoid locking violations. This has consequences. The main one being that iterators over @super_blocks and @fs_supers that grab a temporary reference to the superblock can now also grab s_umount before the caller has managed to open block devices and called fill_super(). So whereas before such iterators or concurrent mounts would have simply slept on s_umount until SB_BORN was set or the superblock was discard due to initalization failure they can now needlessly spin through sget{_fc}(). If the caller is sleeping on bdev_lock or open_mutex one caller waiting on SB_BORN will always spin somewhere and potentially this can go on for quite a while. It should be possible to drop s_umount while allowing iterators to wait on a nascent superblock to either be born or discarded. This patch implements a wait_var_event() mechanism allowing iterators to sleep until they are woken when the superblock is born or discarded. This also allows us to avoid relooping through @fs_supers and @super_blocks if a superblock isn't yet born or dying. Link: aca740cecbe5 ("fs: open block device after superblock creation") Reviewed-by: Jan Kara <jack@suse.cz> Message-Id: <20230818-vfs-super-fixes-v3-v3-3-9f0b1876e46b@kernel.org> Signed-off-by: Christian Brauner <brauner@kernel.org>
2023-08-18 14:00:50 +00:00
__super_lock_excl(s);
if (!error)
error = fill_super(s, data, flags & SB_SILENT ? 1 : 0);
if (error) {
deactivate_locked_super(s);
return ERR_PTR(error);
}
[PATCH] VFS: Permit filesystem to override root dentry on mount Extend the get_sb() filesystem operation to take an extra argument that permits the VFS to pass in the target vfsmount that defines the mountpoint. The filesystem is then required to manually set the superblock and root dentry pointers. For most filesystems, this should be done with simple_set_mnt() which will set the superblock pointer and then set the root dentry to the superblock's s_root (as per the old default behaviour). The get_sb() op now returns an integer as there's now no need to return the superblock pointer. This patch permits a superblock to be implicitly shared amongst several mount points, such as can be done with NFS to avoid potential inode aliasing. In such a case, simple_set_mnt() would not be called, and instead the mnt_root and mnt_sb would be set directly. The patch also makes the following changes: (*) the get_sb_*() convenience functions in the core kernel now take a vfsmount pointer argument and return an integer, so most filesystems have to change very little. (*) If one of the convenience function is not used, then get_sb() should normally call simple_set_mnt() to instantiate the vfsmount. This will always return 0, and so can be tail-called from get_sb(). (*) generic_shutdown_super() now calls shrink_dcache_sb() to clean up the dcache upon superblock destruction rather than shrink_dcache_anon(). This is required because the superblock may now have multiple trees that aren't actually bound to s_root, but that still need to be cleaned up. The currently called functions assume that the whole tree is rooted at s_root, and that anonymous dentries are not the roots of trees which results in dentries being left unculled. However, with the way NFS superblock sharing are currently set to be implemented, these assumptions are violated: the root of the filesystem is simply a dummy dentry and inode (the real inode for '/' may well be inaccessible), and all the vfsmounts are rooted on anonymous[*] dentries with child trees. [*] Anonymous until discovered from another tree. (*) The documentation has been adjusted, including the additional bit of changing ext2_* into foo_* in the documentation. [akpm@osdl.org: convert ipath_fs, do other stuff] Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Al Viro <viro@zeniv.linux.org.uk> Cc: Nathan Scott <nathans@sgi.com> Cc: Roland Dreier <rolandd@cisco.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23 09:02:57 +00:00
s->s_flags |= SB_ACTIVE;
}
return dget(s->s_root);
}
EXPORT_SYMBOL(mount_bdev);
void kill_block_super(struct super_block *sb)
{
struct block_device *bdev = sb->s_bdev;
generic_shutdown_super(sb);
if (bdev) {
sync_blockdev(bdev);
bdev_release(sb->s_bdev_handle);
}
}
EXPORT_SYMBOL(kill_block_super);
[PATCH] BLOCK: Make it possible to disable the block layer [try #6] Make it possible to disable the block layer. Not all embedded devices require it, some can make do with just JFFS2, NFS, ramfs, etc - none of which require the block layer to be present. This patch does the following: (*) Introduces CONFIG_BLOCK to disable the block layer, buffering and blockdev support. (*) Adds dependencies on CONFIG_BLOCK to any configuration item that controls an item that uses the block layer. This includes: (*) Block I/O tracing. (*) Disk partition code. (*) All filesystems that are block based, eg: Ext3, ReiserFS, ISOFS. (*) The SCSI layer. As far as I can tell, even SCSI chardevs use the block layer to do scheduling. Some drivers that use SCSI facilities - such as USB storage - end up disabled indirectly from this. (*) Various block-based device drivers, such as IDE and the old CDROM drivers. (*) MTD blockdev handling and FTL. (*) JFFS - which uses set_bdev_super(), something it could avoid doing by taking a leaf out of JFFS2's book. (*) Makes most of the contents of linux/blkdev.h, linux/buffer_head.h and linux/elevator.h contingent on CONFIG_BLOCK being set. sector_div() is, however, still used in places, and so is still available. (*) Also made contingent are the contents of linux/mpage.h, linux/genhd.h and parts of linux/fs.h. (*) Makes a number of files in fs/ contingent on CONFIG_BLOCK. (*) Makes mm/bounce.c (bounce buffering) contingent on CONFIG_BLOCK. (*) set_page_dirty() doesn't call __set_page_dirty_buffers() if CONFIG_BLOCK is not enabled. (*) fs/no-block.c is created to hold out-of-line stubs and things that are required when CONFIG_BLOCK is not set: (*) Default blockdev file operations (to give error ENODEV on opening). (*) Makes some /proc changes: (*) /proc/devices does not list any blockdevs. (*) /proc/diskstats and /proc/partitions are contingent on CONFIG_BLOCK. (*) Makes some compat ioctl handling contingent on CONFIG_BLOCK. (*) If CONFIG_BLOCK is not defined, makes sys_quotactl() return -ENODEV if given command other than Q_SYNC or if a special device is specified. (*) In init/do_mounts.c, no reference is made to the blockdev routines if CONFIG_BLOCK is not defined. This does not prohibit NFS roots or JFFS2. (*) The bdflush, ioprio_set and ioprio_get syscalls can now be absent (return error ENOSYS by way of cond_syscall if so). (*) The seclvl_bd_claim() and seclvl_bd_release() security calls do nothing if CONFIG_BLOCK is not set, since they can't then happen. Signed-Off-By: David Howells <dhowells@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2006-09-30 18:45:40 +00:00
#endif
struct dentry *mount_nodev(struct file_system_type *fs_type,
int flags, void *data,
int (*fill_super)(struct super_block *, void *, int))
{
int error;
struct super_block *s = sget(fs_type, NULL, set_anon_super, flags, NULL);
if (IS_ERR(s))
return ERR_CAST(s);
error = fill_super(s, data, flags & SB_SILENT ? 1 : 0);
if (error) {
deactivate_locked_super(s);
return ERR_PTR(error);
}
s->s_flags |= SB_ACTIVE;
return dget(s->s_root);
}
EXPORT_SYMBOL(mount_nodev);
int reconfigure_single(struct super_block *s,
int flags, void *data)
{
struct fs_context *fc;
int ret;
/* The caller really need to be passing fc down into mount_single(),
* then a chunk of this can be removed. [Bollocks -- AV]
* Better yet, reconfiguration shouldn't happen, but rather the second
* mount should be rejected if the parameters are not compatible.
*/
fc = fs_context_for_reconfigure(s->s_root, flags, MS_RMT_MASK);
if (IS_ERR(fc))
return PTR_ERR(fc);
ret = parse_monolithic_mount_data(fc, data);
if (ret < 0)
goto out;
ret = reconfigure_super(fc);
out:
put_fs_context(fc);
return ret;
}
static int compare_single(struct super_block *s, void *p)
{
return 1;
}
struct dentry *mount_single(struct file_system_type *fs_type,
int flags, void *data,
int (*fill_super)(struct super_block *, void *, int))
{
struct super_block *s;
int error;
s = sget(fs_type, compare_single, set_anon_super, flags, NULL);
if (IS_ERR(s))
return ERR_CAST(s);
if (!s->s_root) {
error = fill_super(s, data, flags & SB_SILENT ? 1 : 0);
if (!error)
s->s_flags |= SB_ACTIVE;
} else {
error = reconfigure_single(s, flags, data);
}
if (unlikely(error)) {
deactivate_locked_super(s);
return ERR_PTR(error);
}
return dget(s->s_root);
}
EXPORT_SYMBOL(mount_single);
/**
* vfs_get_tree - Get the mountable root
* @fc: The superblock configuration context.
*
* The filesystem is invoked to get or create a superblock which can then later
* be used for mounting. The filesystem places a pointer to the root to be
* used for mounting in @fc->root.
*/
int vfs_get_tree(struct fs_context *fc)
{
struct super_block *sb;
int error;
if (fc->root)
return -EBUSY;
/* Get the mountable root in fc->root, with a ref on the root and a ref
* on the superblock.
*/
error = fc->ops->get_tree(fc);
if (error < 0)
return error;
if (!fc->root) {
pr_err("Filesystem %s get_tree() didn't set fc->root\n",
fc->fs_type->name);
/* We don't know what the locking state of the superblock is -
* if there is a superblock.
*/
BUG();
}
sb = fc->root->d_sb;
WARN_ON(!sb->s_bdi);
fs: don't scan the inode cache before SB_BORN is set We recently had an oops reported on a 4.14 kernel in xfs_reclaim_inodes_count() where sb->s_fs_info pointed to garbage and so the m_perag_tree lookup walked into lala land. It produces an oops down this path during the failed mount: radix_tree_gang_lookup_tag+0xc4/0x130 xfs_perag_get_tag+0x37/0xf0 xfs_reclaim_inodes_count+0x32/0x40 xfs_fs_nr_cached_objects+0x11/0x20 super_cache_count+0x35/0xc0 shrink_slab.part.66+0xb1/0x370 shrink_node+0x7e/0x1a0 try_to_free_pages+0x199/0x470 __alloc_pages_slowpath+0x3a1/0xd20 __alloc_pages_nodemask+0x1c3/0x200 cache_grow_begin+0x20b/0x2e0 fallback_alloc+0x160/0x200 kmem_cache_alloc+0x111/0x4e0 The problem is that the superblock shrinker is running before the filesystem structures it depends on have been fully set up. i.e. the shrinker is registered in sget(), before ->fill_super() has been called, and the shrinker can call into the filesystem before fill_super() does it's setup work. Essentially we are exposed to both use-after-free and use-before-initialisation bugs here. To fix this, add a check for the SB_BORN flag in super_cache_count. In general, this flag is not set until ->fs_mount() completes successfully, so we know that it is set after the filesystem setup has completed. This matches the trylock_super() behaviour which will not let super_cache_scan() run if SB_BORN is not set, and hence will not allow the superblock shrinker from entering the filesystem while it is being set up or after it has failed setup and is being torn down. Cc: stable@kernel.org Signed-Off-By: Dave Chinner <dchinner@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2018-05-11 01:20:57 +00:00
/*
super: wait for nascent superblocks Recent patches experiment with making it possible to allocate a new superblock before opening the relevant block device. Naturally this has intricate side-effects that we get to learn about while developing this. Superblock allocators such as sget{_fc}() return with s_umount of the new superblock held and lock ordering currently requires that block level locks such as bdev_lock and open_mutex rank above s_umount. Before aca740cecbe5 ("fs: open block device after superblock creation") ordering was guaranteed to be correct as block devices were opened prior to superblock allocation and thus s_umount wasn't held. But now s_umount must be dropped before opening block devices to avoid locking violations. This has consequences. The main one being that iterators over @super_blocks and @fs_supers that grab a temporary reference to the superblock can now also grab s_umount before the caller has managed to open block devices and called fill_super(). So whereas before such iterators or concurrent mounts would have simply slept on s_umount until SB_BORN was set or the superblock was discard due to initalization failure they can now needlessly spin through sget{_fc}(). If the caller is sleeping on bdev_lock or open_mutex one caller waiting on SB_BORN will always spin somewhere and potentially this can go on for quite a while. It should be possible to drop s_umount while allowing iterators to wait on a nascent superblock to either be born or discarded. This patch implements a wait_var_event() mechanism allowing iterators to sleep until they are woken when the superblock is born or discarded. This also allows us to avoid relooping through @fs_supers and @super_blocks if a superblock isn't yet born or dying. Link: aca740cecbe5 ("fs: open block device after superblock creation") Reviewed-by: Jan Kara <jack@suse.cz> Message-Id: <20230818-vfs-super-fixes-v3-v3-3-9f0b1876e46b@kernel.org> Signed-off-by: Christian Brauner <brauner@kernel.org>
2023-08-18 14:00:50 +00:00
* super_wake() contains a memory barrier which also care of
* ordering for super_cache_count(). We place it before setting
* SB_BORN as the data dependency between the two functions is
* the superblock structure contents that we just set up, not
* the SB_BORN flag.
fs: don't scan the inode cache before SB_BORN is set We recently had an oops reported on a 4.14 kernel in xfs_reclaim_inodes_count() where sb->s_fs_info pointed to garbage and so the m_perag_tree lookup walked into lala land. It produces an oops down this path during the failed mount: radix_tree_gang_lookup_tag+0xc4/0x130 xfs_perag_get_tag+0x37/0xf0 xfs_reclaim_inodes_count+0x32/0x40 xfs_fs_nr_cached_objects+0x11/0x20 super_cache_count+0x35/0xc0 shrink_slab.part.66+0xb1/0x370 shrink_node+0x7e/0x1a0 try_to_free_pages+0x199/0x470 __alloc_pages_slowpath+0x3a1/0xd20 __alloc_pages_nodemask+0x1c3/0x200 cache_grow_begin+0x20b/0x2e0 fallback_alloc+0x160/0x200 kmem_cache_alloc+0x111/0x4e0 The problem is that the superblock shrinker is running before the filesystem structures it depends on have been fully set up. i.e. the shrinker is registered in sget(), before ->fill_super() has been called, and the shrinker can call into the filesystem before fill_super() does it's setup work. Essentially we are exposed to both use-after-free and use-before-initialisation bugs here. To fix this, add a check for the SB_BORN flag in super_cache_count. In general, this flag is not set until ->fs_mount() completes successfully, so we know that it is set after the filesystem setup has completed. This matches the trylock_super() behaviour which will not let super_cache_scan() run if SB_BORN is not set, and hence will not allow the superblock shrinker from entering the filesystem while it is being set up or after it has failed setup and is being torn down. Cc: stable@kernel.org Signed-Off-By: Dave Chinner <dchinner@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2018-05-11 01:20:57 +00:00
*/
super: wait for nascent superblocks Recent patches experiment with making it possible to allocate a new superblock before opening the relevant block device. Naturally this has intricate side-effects that we get to learn about while developing this. Superblock allocators such as sget{_fc}() return with s_umount of the new superblock held and lock ordering currently requires that block level locks such as bdev_lock and open_mutex rank above s_umount. Before aca740cecbe5 ("fs: open block device after superblock creation") ordering was guaranteed to be correct as block devices were opened prior to superblock allocation and thus s_umount wasn't held. But now s_umount must be dropped before opening block devices to avoid locking violations. This has consequences. The main one being that iterators over @super_blocks and @fs_supers that grab a temporary reference to the superblock can now also grab s_umount before the caller has managed to open block devices and called fill_super(). So whereas before such iterators or concurrent mounts would have simply slept on s_umount until SB_BORN was set or the superblock was discard due to initalization failure they can now needlessly spin through sget{_fc}(). If the caller is sleeping on bdev_lock or open_mutex one caller waiting on SB_BORN will always spin somewhere and potentially this can go on for quite a while. It should be possible to drop s_umount while allowing iterators to wait on a nascent superblock to either be born or discarded. This patch implements a wait_var_event() mechanism allowing iterators to sleep until they are woken when the superblock is born or discarded. This also allows us to avoid relooping through @fs_supers and @super_blocks if a superblock isn't yet born or dying. Link: aca740cecbe5 ("fs: open block device after superblock creation") Reviewed-by: Jan Kara <jack@suse.cz> Message-Id: <20230818-vfs-super-fixes-v3-v3-3-9f0b1876e46b@kernel.org> Signed-off-by: Christian Brauner <brauner@kernel.org>
2023-08-18 14:00:50 +00:00
super_wake(sb, SB_BORN);
[PATCH] VFS: Permit filesystem to override root dentry on mount Extend the get_sb() filesystem operation to take an extra argument that permits the VFS to pass in the target vfsmount that defines the mountpoint. The filesystem is then required to manually set the superblock and root dentry pointers. For most filesystems, this should be done with simple_set_mnt() which will set the superblock pointer and then set the root dentry to the superblock's s_root (as per the old default behaviour). The get_sb() op now returns an integer as there's now no need to return the superblock pointer. This patch permits a superblock to be implicitly shared amongst several mount points, such as can be done with NFS to avoid potential inode aliasing. In such a case, simple_set_mnt() would not be called, and instead the mnt_root and mnt_sb would be set directly. The patch also makes the following changes: (*) the get_sb_*() convenience functions in the core kernel now take a vfsmount pointer argument and return an integer, so most filesystems have to change very little. (*) If one of the convenience function is not used, then get_sb() should normally call simple_set_mnt() to instantiate the vfsmount. This will always return 0, and so can be tail-called from get_sb(). (*) generic_shutdown_super() now calls shrink_dcache_sb() to clean up the dcache upon superblock destruction rather than shrink_dcache_anon(). This is required because the superblock may now have multiple trees that aren't actually bound to s_root, but that still need to be cleaned up. The currently called functions assume that the whole tree is rooted at s_root, and that anonymous dentries are not the roots of trees which results in dentries being left unculled. However, with the way NFS superblock sharing are currently set to be implemented, these assumptions are violated: the root of the filesystem is simply a dummy dentry and inode (the real inode for '/' may well be inaccessible), and all the vfsmounts are rooted on anonymous[*] dentries with child trees. [*] Anonymous until discovered from another tree. (*) The documentation has been adjusted, including the additional bit of changing ext2_* into foo_* in the documentation. [akpm@osdl.org: convert ipath_fs, do other stuff] Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Al Viro <viro@zeniv.linux.org.uk> Cc: Nathan Scott <nathans@sgi.com> Cc: Roland Dreier <rolandd@cisco.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-23 09:02:57 +00:00
error = security_sb_set_mnt_opts(sb, fc->security, 0, NULL);
vfs_get_tree(): evict the call of security_sb_kern_mount() Right now vfs_get_tree() calls security_sb_kern_mount() (i.e. mount MAC) unless it gets MS_KERNMOUNT or MS_SUBMOUNT in flags. Doing it that way is both clumsy and imprecise. Consider the callers' tree of vfs_get_tree(): vfs_get_tree() <- do_new_mount() <- vfs_kern_mount() <- simple_pin_fs() <- vfs_submount() <- kern_mount_data() <- init_mount_tree() <- btrfs_mount() <- vfs_get_tree() <- nfs_do_root_mount() <- nfs4_try_mount() <- nfs_fs_mount() <- vfs_get_tree() <- nfs4_referral_mount() do_new_mount() always does need MAC (we are guaranteed that neither MS_KERNMOUNT nor MS_SUBMOUNT will be passed there). simple_pin_fs(), vfs_submount() and kern_mount_data() pass explicit flags inhibiting that check. So does nfs4_referral_mount() (the flags there are ulimately coming from vfs_submount()). init_mount_tree() is called too early for anything LSM-related; it doesn't matter whether we attempt those checks, they'll do nothing. Finally, in case of btrfs_mount() and nfs_fs_mount(), doing MAC is pointless - either the caller will do it, or the flags are such that we wouldn't have done it either. In other words, the one and only case when we want that check done is when we are called from do_new_mount(), and there we want it unconditionally. So let's simply move it there. The superblock is still locked, so nobody is going to get access to it (via ustat(2), etc.) until we get a chance to apply the checks - we are free to move them to any point up to where we drop ->s_umount (in do_new_mount_fc()). Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2018-12-20 20:04:50 +00:00
if (unlikely(error)) {
fc_drop_locked(fc);
return error;
}
/*
* filesystems should never set s_maxbytes larger than MAX_LFS_FILESIZE
* but s_maxbytes was an unsigned long long for many releases. Throw
* this warning for a little while to try and catch filesystems that
* violate this rule.
*/
WARN((sb->s_maxbytes < 0), "%s set sb->s_maxbytes to "
"negative value (%lld)\n", fc->fs_type->name, sb->s_maxbytes);
return 0;
}
EXPORT_SYMBOL(vfs_get_tree);
/*
* Setup private BDI for given superblock. It gets automatically cleaned up
* in generic_shutdown_super().
*/
int super_setup_bdi_name(struct super_block *sb, char *fmt, ...)
{
struct backing_dev_info *bdi;
int err;
va_list args;
bdi = bdi_alloc(NUMA_NO_NODE);
if (!bdi)
return -ENOMEM;
va_start(args, fmt);
err = bdi_register_va(bdi, fmt, args);
va_end(args);
if (err) {
bdi_put(bdi);
return err;
}
WARN_ON(sb->s_bdi != &noop_backing_dev_info);
sb->s_bdi = bdi;
sb->s_iflags |= SB_I_PERSB_BDI;
return 0;
}
EXPORT_SYMBOL(super_setup_bdi_name);
/*
* Setup private BDI for given superblock. I gets automatically cleaned up
* in generic_shutdown_super().
*/
int super_setup_bdi(struct super_block *sb)
{
static atomic_long_t bdi_seq = ATOMIC_LONG_INIT(0);
return super_setup_bdi_name(sb, "%.28s-%ld", sb->s_type->name,
atomic_long_inc_return(&bdi_seq));
}
EXPORT_SYMBOL(super_setup_bdi);
fs: Improve filesystem freezing handling vfs_check_frozen() tests are racy since the filesystem can be frozen just after the test is performed. Thus in write paths we can end up marking some pages or inodes dirty even though the file system is already frozen. This creates problems with flusher thread hanging on frozen filesystem. Another problem is that exclusion between ->page_mkwrite() and filesystem freezing has been handled by setting page dirty and then verifying s_frozen. This guaranteed that either the freezing code sees the faulted page, writes it, and writeprotects it again or we see s_frozen set and bail out of page fault. This works to protect from page being marked writeable while filesystem freezing is running but has an unpleasant artefact of leaving dirty (although unmodified and writeprotected) pages on frozen filesystem resulting in similar problems with flusher thread as the first problem. This patch aims at providing exclusion between write paths and filesystem freezing. We implement a writer-freeze read-write semaphore in the superblock. Actually, there are three such semaphores because of lock ranking reasons - one for page fault handlers (->page_mkwrite), one for all other writers, and one of internal filesystem purposes (used e.g. to track running transactions). Write paths which should block freezing (e.g. directory operations, ->aio_write(), ->page_mkwrite) hold reader side of the semaphore. Code freezing the filesystem takes the writer side. Only that we don't really want to bounce cachelines of the semaphores between CPUs for each write happening. So we implement the reader side of the semaphore as a per-cpu counter and the writer side is implemented using s_writers.frozen superblock field. [AV: microoptimize sb_start_write(); we want it fast in normal case] BugLink: https://bugs.launchpad.net/bugs/897421 Tested-by: Kamal Mostafa <kamal@canonical.com> Tested-by: Peter M. Petrakis <peter.petrakis@canonical.com> Tested-by: Dann Frazier <dann.frazier@canonical.com> Tested-by: Massimo Morana <massimo.morana@canonical.com> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-06-12 14:20:34 +00:00
/**
* sb_wait_write - wait until all writers to given file system finish
* @sb: the super for which we wait
* @level: type of writers we wait for (normal vs page fault)
*
* This function waits until there are no writers of given type to given file
change sb_writers to use percpu_rw_semaphore We can remove everything from struct sb_writers except frozen and add the array of percpu_rw_semaphore's instead. This patch doesn't remove sb_writers->wait_unfrozen yet, we keep it for get_super_thawed(). We will probably remove it later. This change tries to address the following problems: - Firstly, __sb_start_write() looks simply buggy. It does __sb_end_write() if it sees ->frozen, but if it migrates to another CPU before percpu_counter_dec(), sb_wait_write() can wrongly succeed if there is another task which holds the same "semaphore": sb_wait_write() can miss the result of the previous percpu_counter_inc() but see the result of this percpu_counter_dec(). - As Dave Hansen reports, it is suboptimal. The trivial microbenchmark that writes to a tmpfs file in a loop runs 12% faster if we change this code to rely on RCU and kill the memory barriers. - This code doesn't look simple. It would be better to rely on the generic locking code. According to Dave, this change adds the same performance improvement. Note: with this change both freeze_super() and thaw_super() will do synchronize_sched_expedited() 3 times. This is just ugly. But: - This will be "fixed" by the rcu_sync changes we are going to merge. After that freeze_super()->percpu_down_write() will use synchronize_sched(), and thaw_super() won't use synchronize() at all. This doesn't need any changes in fs/super.c. - Once we merge rcu_sync changes, we can also change super.c so that all wb_write->rw_sem's will share the single ->rss in struct sb_writes, then freeze_super() will need only one synchronize_sched(). Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Jan Kara <jack@suse.com>
2015-08-11 15:05:04 +00:00
* system.
fs: Improve filesystem freezing handling vfs_check_frozen() tests are racy since the filesystem can be frozen just after the test is performed. Thus in write paths we can end up marking some pages or inodes dirty even though the file system is already frozen. This creates problems with flusher thread hanging on frozen filesystem. Another problem is that exclusion between ->page_mkwrite() and filesystem freezing has been handled by setting page dirty and then verifying s_frozen. This guaranteed that either the freezing code sees the faulted page, writes it, and writeprotects it again or we see s_frozen set and bail out of page fault. This works to protect from page being marked writeable while filesystem freezing is running but has an unpleasant artefact of leaving dirty (although unmodified and writeprotected) pages on frozen filesystem resulting in similar problems with flusher thread as the first problem. This patch aims at providing exclusion between write paths and filesystem freezing. We implement a writer-freeze read-write semaphore in the superblock. Actually, there are three such semaphores because of lock ranking reasons - one for page fault handlers (->page_mkwrite), one for all other writers, and one of internal filesystem purposes (used e.g. to track running transactions). Write paths which should block freezing (e.g. directory operations, ->aio_write(), ->page_mkwrite) hold reader side of the semaphore. Code freezing the filesystem takes the writer side. Only that we don't really want to bounce cachelines of the semaphores between CPUs for each write happening. So we implement the reader side of the semaphore as a per-cpu counter and the writer side is implemented using s_writers.frozen superblock field. [AV: microoptimize sb_start_write(); we want it fast in normal case] BugLink: https://bugs.launchpad.net/bugs/897421 Tested-by: Kamal Mostafa <kamal@canonical.com> Tested-by: Peter M. Petrakis <peter.petrakis@canonical.com> Tested-by: Dann Frazier <dann.frazier@canonical.com> Tested-by: Massimo Morana <massimo.morana@canonical.com> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-06-12 14:20:34 +00:00
*/
static void sb_wait_write(struct super_block *sb, int level)
{
change sb_writers to use percpu_rw_semaphore We can remove everything from struct sb_writers except frozen and add the array of percpu_rw_semaphore's instead. This patch doesn't remove sb_writers->wait_unfrozen yet, we keep it for get_super_thawed(). We will probably remove it later. This change tries to address the following problems: - Firstly, __sb_start_write() looks simply buggy. It does __sb_end_write() if it sees ->frozen, but if it migrates to another CPU before percpu_counter_dec(), sb_wait_write() can wrongly succeed if there is another task which holds the same "semaphore": sb_wait_write() can miss the result of the previous percpu_counter_inc() but see the result of this percpu_counter_dec(). - As Dave Hansen reports, it is suboptimal. The trivial microbenchmark that writes to a tmpfs file in a loop runs 12% faster if we change this code to rely on RCU and kill the memory barriers. - This code doesn't look simple. It would be better to rely on the generic locking code. According to Dave, this change adds the same performance improvement. Note: with this change both freeze_super() and thaw_super() will do synchronize_sched_expedited() 3 times. This is just ugly. But: - This will be "fixed" by the rcu_sync changes we are going to merge. After that freeze_super()->percpu_down_write() will use synchronize_sched(), and thaw_super() won't use synchronize() at all. This doesn't need any changes in fs/super.c. - Once we merge rcu_sync changes, we can also change super.c so that all wb_write->rw_sem's will share the single ->rss in struct sb_writes, then freeze_super() will need only one synchronize_sched(). Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Jan Kara <jack@suse.com>
2015-08-11 15:05:04 +00:00
percpu_down_write(sb->s_writers.rw_sem + level-1);
}
fs: Improve filesystem freezing handling vfs_check_frozen() tests are racy since the filesystem can be frozen just after the test is performed. Thus in write paths we can end up marking some pages or inodes dirty even though the file system is already frozen. This creates problems with flusher thread hanging on frozen filesystem. Another problem is that exclusion between ->page_mkwrite() and filesystem freezing has been handled by setting page dirty and then verifying s_frozen. This guaranteed that either the freezing code sees the faulted page, writes it, and writeprotects it again or we see s_frozen set and bail out of page fault. This works to protect from page being marked writeable while filesystem freezing is running but has an unpleasant artefact of leaving dirty (although unmodified and writeprotected) pages on frozen filesystem resulting in similar problems with flusher thread as the first problem. This patch aims at providing exclusion between write paths and filesystem freezing. We implement a writer-freeze read-write semaphore in the superblock. Actually, there are three such semaphores because of lock ranking reasons - one for page fault handlers (->page_mkwrite), one for all other writers, and one of internal filesystem purposes (used e.g. to track running transactions). Write paths which should block freezing (e.g. directory operations, ->aio_write(), ->page_mkwrite) hold reader side of the semaphore. Code freezing the filesystem takes the writer side. Only that we don't really want to bounce cachelines of the semaphores between CPUs for each write happening. So we implement the reader side of the semaphore as a per-cpu counter and the writer side is implemented using s_writers.frozen superblock field. [AV: microoptimize sb_start_write(); we want it fast in normal case] BugLink: https://bugs.launchpad.net/bugs/897421 Tested-by: Kamal Mostafa <kamal@canonical.com> Tested-by: Peter M. Petrakis <peter.petrakis@canonical.com> Tested-by: Dann Frazier <dann.frazier@canonical.com> Tested-by: Massimo Morana <massimo.morana@canonical.com> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-06-12 14:20:34 +00:00
/*
* We are going to return to userspace and forget about these locks, the
* ownership goes to the caller of thaw_super() which does unlock().
*/
static void lockdep_sb_freeze_release(struct super_block *sb)
{
int level;
for (level = SB_FREEZE_LEVELS - 1; level >= 0; level--)
percpu_rwsem_release(sb->s_writers.rw_sem + level, 0, _THIS_IP_);
}
/*
* Tell lockdep we are holding these locks before we call ->unfreeze_fs(sb).
*/
static void lockdep_sb_freeze_acquire(struct super_block *sb)
change sb_writers to use percpu_rw_semaphore We can remove everything from struct sb_writers except frozen and add the array of percpu_rw_semaphore's instead. This patch doesn't remove sb_writers->wait_unfrozen yet, we keep it for get_super_thawed(). We will probably remove it later. This change tries to address the following problems: - Firstly, __sb_start_write() looks simply buggy. It does __sb_end_write() if it sees ->frozen, but if it migrates to another CPU before percpu_counter_dec(), sb_wait_write() can wrongly succeed if there is another task which holds the same "semaphore": sb_wait_write() can miss the result of the previous percpu_counter_inc() but see the result of this percpu_counter_dec(). - As Dave Hansen reports, it is suboptimal. The trivial microbenchmark that writes to a tmpfs file in a loop runs 12% faster if we change this code to rely on RCU and kill the memory barriers. - This code doesn't look simple. It would be better to rely on the generic locking code. According to Dave, this change adds the same performance improvement. Note: with this change both freeze_super() and thaw_super() will do synchronize_sched_expedited() 3 times. This is just ugly. But: - This will be "fixed" by the rcu_sync changes we are going to merge. After that freeze_super()->percpu_down_write() will use synchronize_sched(), and thaw_super() won't use synchronize() at all. This doesn't need any changes in fs/super.c. - Once we merge rcu_sync changes, we can also change super.c so that all wb_write->rw_sem's will share the single ->rss in struct sb_writes, then freeze_super() will need only one synchronize_sched(). Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Jan Kara <jack@suse.com>
2015-08-11 15:05:04 +00:00
{
int level;
fs: Improve filesystem freezing handling vfs_check_frozen() tests are racy since the filesystem can be frozen just after the test is performed. Thus in write paths we can end up marking some pages or inodes dirty even though the file system is already frozen. This creates problems with flusher thread hanging on frozen filesystem. Another problem is that exclusion between ->page_mkwrite() and filesystem freezing has been handled by setting page dirty and then verifying s_frozen. This guaranteed that either the freezing code sees the faulted page, writes it, and writeprotects it again or we see s_frozen set and bail out of page fault. This works to protect from page being marked writeable while filesystem freezing is running but has an unpleasant artefact of leaving dirty (although unmodified and writeprotected) pages on frozen filesystem resulting in similar problems with flusher thread as the first problem. This patch aims at providing exclusion between write paths and filesystem freezing. We implement a writer-freeze read-write semaphore in the superblock. Actually, there are three such semaphores because of lock ranking reasons - one for page fault handlers (->page_mkwrite), one for all other writers, and one of internal filesystem purposes (used e.g. to track running transactions). Write paths which should block freezing (e.g. directory operations, ->aio_write(), ->page_mkwrite) hold reader side of the semaphore. Code freezing the filesystem takes the writer side. Only that we don't really want to bounce cachelines of the semaphores between CPUs for each write happening. So we implement the reader side of the semaphore as a per-cpu counter and the writer side is implemented using s_writers.frozen superblock field. [AV: microoptimize sb_start_write(); we want it fast in normal case] BugLink: https://bugs.launchpad.net/bugs/897421 Tested-by: Kamal Mostafa <kamal@canonical.com> Tested-by: Peter M. Petrakis <peter.petrakis@canonical.com> Tested-by: Dann Frazier <dann.frazier@canonical.com> Tested-by: Massimo Morana <massimo.morana@canonical.com> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-06-12 14:20:34 +00:00
change sb_writers to use percpu_rw_semaphore We can remove everything from struct sb_writers except frozen and add the array of percpu_rw_semaphore's instead. This patch doesn't remove sb_writers->wait_unfrozen yet, we keep it for get_super_thawed(). We will probably remove it later. This change tries to address the following problems: - Firstly, __sb_start_write() looks simply buggy. It does __sb_end_write() if it sees ->frozen, but if it migrates to another CPU before percpu_counter_dec(), sb_wait_write() can wrongly succeed if there is another task which holds the same "semaphore": sb_wait_write() can miss the result of the previous percpu_counter_inc() but see the result of this percpu_counter_dec(). - As Dave Hansen reports, it is suboptimal. The trivial microbenchmark that writes to a tmpfs file in a loop runs 12% faster if we change this code to rely on RCU and kill the memory barriers. - This code doesn't look simple. It would be better to rely on the generic locking code. According to Dave, this change adds the same performance improvement. Note: with this change both freeze_super() and thaw_super() will do synchronize_sched_expedited() 3 times. This is just ugly. But: - This will be "fixed" by the rcu_sync changes we are going to merge. After that freeze_super()->percpu_down_write() will use synchronize_sched(), and thaw_super() won't use synchronize() at all. This doesn't need any changes in fs/super.c. - Once we merge rcu_sync changes, we can also change super.c so that all wb_write->rw_sem's will share the single ->rss in struct sb_writes, then freeze_super() will need only one synchronize_sched(). Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Jan Kara <jack@suse.com>
2015-08-11 15:05:04 +00:00
for (level = 0; level < SB_FREEZE_LEVELS; ++level)
percpu_rwsem_acquire(sb->s_writers.rw_sem + level, 0, _THIS_IP_);
}
static void sb_freeze_unlock(struct super_block *sb, int level)
{
for (level--; level >= 0; level--)
change sb_writers to use percpu_rw_semaphore We can remove everything from struct sb_writers except frozen and add the array of percpu_rw_semaphore's instead. This patch doesn't remove sb_writers->wait_unfrozen yet, we keep it for get_super_thawed(). We will probably remove it later. This change tries to address the following problems: - Firstly, __sb_start_write() looks simply buggy. It does __sb_end_write() if it sees ->frozen, but if it migrates to another CPU before percpu_counter_dec(), sb_wait_write() can wrongly succeed if there is another task which holds the same "semaphore": sb_wait_write() can miss the result of the previous percpu_counter_inc() but see the result of this percpu_counter_dec(). - As Dave Hansen reports, it is suboptimal. The trivial microbenchmark that writes to a tmpfs file in a loop runs 12% faster if we change this code to rely on RCU and kill the memory barriers. - This code doesn't look simple. It would be better to rely on the generic locking code. According to Dave, this change adds the same performance improvement. Note: with this change both freeze_super() and thaw_super() will do synchronize_sched_expedited() 3 times. This is just ugly. But: - This will be "fixed" by the rcu_sync changes we are going to merge. After that freeze_super()->percpu_down_write() will use synchronize_sched(), and thaw_super() won't use synchronize() at all. This doesn't need any changes in fs/super.c. - Once we merge rcu_sync changes, we can also change super.c so that all wb_write->rw_sem's will share the single ->rss in struct sb_writes, then freeze_super() will need only one synchronize_sched(). Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Jan Kara <jack@suse.com>
2015-08-11 15:05:04 +00:00
percpu_up_write(sb->s_writers.rw_sem + level);
fs: Improve filesystem freezing handling vfs_check_frozen() tests are racy since the filesystem can be frozen just after the test is performed. Thus in write paths we can end up marking some pages or inodes dirty even though the file system is already frozen. This creates problems with flusher thread hanging on frozen filesystem. Another problem is that exclusion between ->page_mkwrite() and filesystem freezing has been handled by setting page dirty and then verifying s_frozen. This guaranteed that either the freezing code sees the faulted page, writes it, and writeprotects it again or we see s_frozen set and bail out of page fault. This works to protect from page being marked writeable while filesystem freezing is running but has an unpleasant artefact of leaving dirty (although unmodified and writeprotected) pages on frozen filesystem resulting in similar problems with flusher thread as the first problem. This patch aims at providing exclusion between write paths and filesystem freezing. We implement a writer-freeze read-write semaphore in the superblock. Actually, there are three such semaphores because of lock ranking reasons - one for page fault handlers (->page_mkwrite), one for all other writers, and one of internal filesystem purposes (used e.g. to track running transactions). Write paths which should block freezing (e.g. directory operations, ->aio_write(), ->page_mkwrite) hold reader side of the semaphore. Code freezing the filesystem takes the writer side. Only that we don't really want to bounce cachelines of the semaphores between CPUs for each write happening. So we implement the reader side of the semaphore as a per-cpu counter and the writer side is implemented using s_writers.frozen superblock field. [AV: microoptimize sb_start_write(); we want it fast in normal case] BugLink: https://bugs.launchpad.net/bugs/897421 Tested-by: Kamal Mostafa <kamal@canonical.com> Tested-by: Peter M. Petrakis <peter.petrakis@canonical.com> Tested-by: Dann Frazier <dann.frazier@canonical.com> Tested-by: Massimo Morana <massimo.morana@canonical.com> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-06-12 14:20:34 +00:00
}
static int wait_for_partially_frozen(struct super_block *sb)
{
int ret = 0;
do {
unsigned short old = sb->s_writers.frozen;
up_write(&sb->s_umount);
ret = wait_var_event_killable(&sb->s_writers.frozen,
sb->s_writers.frozen != old);
down_write(&sb->s_umount);
} while (ret == 0 &&
sb->s_writers.frozen != SB_UNFROZEN &&
sb->s_writers.frozen != SB_FREEZE_COMPLETE);
return ret;
}
/**
* freeze_super - lock the filesystem and force it into a consistent state
* @sb: the super to lock
* @who: context that wants to freeze
*
* Syncs the super to make sure the filesystem is consistent and calls the fs's
* freeze_fs. Subsequent calls to this without first thawing the fs may return
* -EBUSY.
fs: Improve filesystem freezing handling vfs_check_frozen() tests are racy since the filesystem can be frozen just after the test is performed. Thus in write paths we can end up marking some pages or inodes dirty even though the file system is already frozen. This creates problems with flusher thread hanging on frozen filesystem. Another problem is that exclusion between ->page_mkwrite() and filesystem freezing has been handled by setting page dirty and then verifying s_frozen. This guaranteed that either the freezing code sees the faulted page, writes it, and writeprotects it again or we see s_frozen set and bail out of page fault. This works to protect from page being marked writeable while filesystem freezing is running but has an unpleasant artefact of leaving dirty (although unmodified and writeprotected) pages on frozen filesystem resulting in similar problems with flusher thread as the first problem. This patch aims at providing exclusion between write paths and filesystem freezing. We implement a writer-freeze read-write semaphore in the superblock. Actually, there are three such semaphores because of lock ranking reasons - one for page fault handlers (->page_mkwrite), one for all other writers, and one of internal filesystem purposes (used e.g. to track running transactions). Write paths which should block freezing (e.g. directory operations, ->aio_write(), ->page_mkwrite) hold reader side of the semaphore. Code freezing the filesystem takes the writer side. Only that we don't really want to bounce cachelines of the semaphores between CPUs for each write happening. So we implement the reader side of the semaphore as a per-cpu counter and the writer side is implemented using s_writers.frozen superblock field. [AV: microoptimize sb_start_write(); we want it fast in normal case] BugLink: https://bugs.launchpad.net/bugs/897421 Tested-by: Kamal Mostafa <kamal@canonical.com> Tested-by: Peter M. Petrakis <peter.petrakis@canonical.com> Tested-by: Dann Frazier <dann.frazier@canonical.com> Tested-by: Massimo Morana <massimo.morana@canonical.com> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-06-12 14:20:34 +00:00
*
* @who should be:
* * %FREEZE_HOLDER_USERSPACE if userspace wants to freeze the fs;
* * %FREEZE_HOLDER_KERNEL if the kernel wants to freeze the fs.
*
* The @who argument distinguishes between the kernel and userspace trying to
* freeze the filesystem. Although there cannot be multiple kernel freezes or
* multiple userspace freezes in effect at any given time, the kernel and
* userspace can both hold a filesystem frozen. The filesystem remains frozen
* until there are no kernel or userspace freezes in effect.
*
fs: Improve filesystem freezing handling vfs_check_frozen() tests are racy since the filesystem can be frozen just after the test is performed. Thus in write paths we can end up marking some pages or inodes dirty even though the file system is already frozen. This creates problems with flusher thread hanging on frozen filesystem. Another problem is that exclusion between ->page_mkwrite() and filesystem freezing has been handled by setting page dirty and then verifying s_frozen. This guaranteed that either the freezing code sees the faulted page, writes it, and writeprotects it again or we see s_frozen set and bail out of page fault. This works to protect from page being marked writeable while filesystem freezing is running but has an unpleasant artefact of leaving dirty (although unmodified and writeprotected) pages on frozen filesystem resulting in similar problems with flusher thread as the first problem. This patch aims at providing exclusion between write paths and filesystem freezing. We implement a writer-freeze read-write semaphore in the superblock. Actually, there are three such semaphores because of lock ranking reasons - one for page fault handlers (->page_mkwrite), one for all other writers, and one of internal filesystem purposes (used e.g. to track running transactions). Write paths which should block freezing (e.g. directory operations, ->aio_write(), ->page_mkwrite) hold reader side of the semaphore. Code freezing the filesystem takes the writer side. Only that we don't really want to bounce cachelines of the semaphores between CPUs for each write happening. So we implement the reader side of the semaphore as a per-cpu counter and the writer side is implemented using s_writers.frozen superblock field. [AV: microoptimize sb_start_write(); we want it fast in normal case] BugLink: https://bugs.launchpad.net/bugs/897421 Tested-by: Kamal Mostafa <kamal@canonical.com> Tested-by: Peter M. Petrakis <peter.petrakis@canonical.com> Tested-by: Dann Frazier <dann.frazier@canonical.com> Tested-by: Massimo Morana <massimo.morana@canonical.com> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-06-12 14:20:34 +00:00
* During this function, sb->s_writers.frozen goes through these values:
*
* SB_UNFROZEN: File system is normal, all writes progress as usual.
*
* SB_FREEZE_WRITE: The file system is in the process of being frozen. New
* writes should be blocked, though page faults are still allowed. We wait for
* all writes to complete and then proceed to the next stage.
*
* SB_FREEZE_PAGEFAULT: Freezing continues. Now also page faults are blocked
* but internal fs threads can still modify the filesystem (although they
* should not dirty new pages or inodes), writeback can run etc. After waiting
* for all running page faults we sync the filesystem which will clean all
* dirty pages and inodes (no new dirty pages or inodes can be created when
* sync is running).
*
* SB_FREEZE_FS: The file system is frozen. Now all internal sources of fs
* modification are blocked (e.g. XFS preallocation truncation on inode
* reclaim). This is usually implemented by blocking new transactions for
* filesystems that have them and need this additional guard. After all
* internal writers are finished we call ->freeze_fs() to finish filesystem
* freezing. Then we transition to SB_FREEZE_COMPLETE state. This state is
* mostly auxiliary for filesystems to verify they do not modify frozen fs.
*
* sb->s_writers.frozen is protected by sb->s_umount.
*/
int freeze_super(struct super_block *sb, enum freeze_holder who)
{
int ret;
if (!super_lock_excl(sb)) {
WARN_ON_ONCE("Dying superblock while freezing!");
return -EINVAL;
}
atomic_inc(&sb->s_active);
retry:
if (sb->s_writers.frozen == SB_FREEZE_COMPLETE) {
if (sb->s_writers.freeze_holders & who) {
deactivate_locked_super(sb);
return -EBUSY;
}
WARN_ON(sb->s_writers.freeze_holders == 0);
/*
* Someone else already holds this type of freeze; share the
* freeze and assign the active ref to the freeze.
*/
sb->s_writers.freeze_holders |= who;
super_unlock_excl(sb);
return 0;
}
fs: Improve filesystem freezing handling vfs_check_frozen() tests are racy since the filesystem can be frozen just after the test is performed. Thus in write paths we can end up marking some pages or inodes dirty even though the file system is already frozen. This creates problems with flusher thread hanging on frozen filesystem. Another problem is that exclusion between ->page_mkwrite() and filesystem freezing has been handled by setting page dirty and then verifying s_frozen. This guaranteed that either the freezing code sees the faulted page, writes it, and writeprotects it again or we see s_frozen set and bail out of page fault. This works to protect from page being marked writeable while filesystem freezing is running but has an unpleasant artefact of leaving dirty (although unmodified and writeprotected) pages on frozen filesystem resulting in similar problems with flusher thread as the first problem. This patch aims at providing exclusion between write paths and filesystem freezing. We implement a writer-freeze read-write semaphore in the superblock. Actually, there are three such semaphores because of lock ranking reasons - one for page fault handlers (->page_mkwrite), one for all other writers, and one of internal filesystem purposes (used e.g. to track running transactions). Write paths which should block freezing (e.g. directory operations, ->aio_write(), ->page_mkwrite) hold reader side of the semaphore. Code freezing the filesystem takes the writer side. Only that we don't really want to bounce cachelines of the semaphores between CPUs for each write happening. So we implement the reader side of the semaphore as a per-cpu counter and the writer side is implemented using s_writers.frozen superblock field. [AV: microoptimize sb_start_write(); we want it fast in normal case] BugLink: https://bugs.launchpad.net/bugs/897421 Tested-by: Kamal Mostafa <kamal@canonical.com> Tested-by: Peter M. Petrakis <peter.petrakis@canonical.com> Tested-by: Dann Frazier <dann.frazier@canonical.com> Tested-by: Massimo Morana <massimo.morana@canonical.com> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-06-12 14:20:34 +00:00
if (sb->s_writers.frozen != SB_UNFROZEN) {
ret = wait_for_partially_frozen(sb);
if (ret) {
deactivate_locked_super(sb);
return ret;
}
goto retry;
}
if (!(sb->s_flags & SB_BORN)) {
super_unlock_excl(sb);
return 0; /* sic - it's "nothing to do" */
}
if (sb_rdonly(sb)) {
fs: Improve filesystem freezing handling vfs_check_frozen() tests are racy since the filesystem can be frozen just after the test is performed. Thus in write paths we can end up marking some pages or inodes dirty even though the file system is already frozen. This creates problems with flusher thread hanging on frozen filesystem. Another problem is that exclusion between ->page_mkwrite() and filesystem freezing has been handled by setting page dirty and then verifying s_frozen. This guaranteed that either the freezing code sees the faulted page, writes it, and writeprotects it again or we see s_frozen set and bail out of page fault. This works to protect from page being marked writeable while filesystem freezing is running but has an unpleasant artefact of leaving dirty (although unmodified and writeprotected) pages on frozen filesystem resulting in similar problems with flusher thread as the first problem. This patch aims at providing exclusion between write paths and filesystem freezing. We implement a writer-freeze read-write semaphore in the superblock. Actually, there are three such semaphores because of lock ranking reasons - one for page fault handlers (->page_mkwrite), one for all other writers, and one of internal filesystem purposes (used e.g. to track running transactions). Write paths which should block freezing (e.g. directory operations, ->aio_write(), ->page_mkwrite) hold reader side of the semaphore. Code freezing the filesystem takes the writer side. Only that we don't really want to bounce cachelines of the semaphores between CPUs for each write happening. So we implement the reader side of the semaphore as a per-cpu counter and the writer side is implemented using s_writers.frozen superblock field. [AV: microoptimize sb_start_write(); we want it fast in normal case] BugLink: https://bugs.launchpad.net/bugs/897421 Tested-by: Kamal Mostafa <kamal@canonical.com> Tested-by: Peter M. Petrakis <peter.petrakis@canonical.com> Tested-by: Dann Frazier <dann.frazier@canonical.com> Tested-by: Massimo Morana <massimo.morana@canonical.com> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-06-12 14:20:34 +00:00
/* Nothing to do really... */
sb->s_writers.freeze_holders |= who;
fs: Improve filesystem freezing handling vfs_check_frozen() tests are racy since the filesystem can be frozen just after the test is performed. Thus in write paths we can end up marking some pages or inodes dirty even though the file system is already frozen. This creates problems with flusher thread hanging on frozen filesystem. Another problem is that exclusion between ->page_mkwrite() and filesystem freezing has been handled by setting page dirty and then verifying s_frozen. This guaranteed that either the freezing code sees the faulted page, writes it, and writeprotects it again or we see s_frozen set and bail out of page fault. This works to protect from page being marked writeable while filesystem freezing is running but has an unpleasant artefact of leaving dirty (although unmodified and writeprotected) pages on frozen filesystem resulting in similar problems with flusher thread as the first problem. This patch aims at providing exclusion between write paths and filesystem freezing. We implement a writer-freeze read-write semaphore in the superblock. Actually, there are three such semaphores because of lock ranking reasons - one for page fault handlers (->page_mkwrite), one for all other writers, and one of internal filesystem purposes (used e.g. to track running transactions). Write paths which should block freezing (e.g. directory operations, ->aio_write(), ->page_mkwrite) hold reader side of the semaphore. Code freezing the filesystem takes the writer side. Only that we don't really want to bounce cachelines of the semaphores between CPUs for each write happening. So we implement the reader side of the semaphore as a per-cpu counter and the writer side is implemented using s_writers.frozen superblock field. [AV: microoptimize sb_start_write(); we want it fast in normal case] BugLink: https://bugs.launchpad.net/bugs/897421 Tested-by: Kamal Mostafa <kamal@canonical.com> Tested-by: Peter M. Petrakis <peter.petrakis@canonical.com> Tested-by: Dann Frazier <dann.frazier@canonical.com> Tested-by: Massimo Morana <massimo.morana@canonical.com> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-06-12 14:20:34 +00:00
sb->s_writers.frozen = SB_FREEZE_COMPLETE;
wake_up_var(&sb->s_writers.frozen);
super_unlock_excl(sb);
return 0;
}
fs: Improve filesystem freezing handling vfs_check_frozen() tests are racy since the filesystem can be frozen just after the test is performed. Thus in write paths we can end up marking some pages or inodes dirty even though the file system is already frozen. This creates problems with flusher thread hanging on frozen filesystem. Another problem is that exclusion between ->page_mkwrite() and filesystem freezing has been handled by setting page dirty and then verifying s_frozen. This guaranteed that either the freezing code sees the faulted page, writes it, and writeprotects it again or we see s_frozen set and bail out of page fault. This works to protect from page being marked writeable while filesystem freezing is running but has an unpleasant artefact of leaving dirty (although unmodified and writeprotected) pages on frozen filesystem resulting in similar problems with flusher thread as the first problem. This patch aims at providing exclusion between write paths and filesystem freezing. We implement a writer-freeze read-write semaphore in the superblock. Actually, there are three such semaphores because of lock ranking reasons - one for page fault handlers (->page_mkwrite), one for all other writers, and one of internal filesystem purposes (used e.g. to track running transactions). Write paths which should block freezing (e.g. directory operations, ->aio_write(), ->page_mkwrite) hold reader side of the semaphore. Code freezing the filesystem takes the writer side. Only that we don't really want to bounce cachelines of the semaphores between CPUs for each write happening. So we implement the reader side of the semaphore as a per-cpu counter and the writer side is implemented using s_writers.frozen superblock field. [AV: microoptimize sb_start_write(); we want it fast in normal case] BugLink: https://bugs.launchpad.net/bugs/897421 Tested-by: Kamal Mostafa <kamal@canonical.com> Tested-by: Peter M. Petrakis <peter.petrakis@canonical.com> Tested-by: Dann Frazier <dann.frazier@canonical.com> Tested-by: Massimo Morana <massimo.morana@canonical.com> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-06-12 14:20:34 +00:00
sb->s_writers.frozen = SB_FREEZE_WRITE;
/* Release s_umount to preserve sb_start_write -> s_umount ordering */
super_unlock_excl(sb);
fs: Improve filesystem freezing handling vfs_check_frozen() tests are racy since the filesystem can be frozen just after the test is performed. Thus in write paths we can end up marking some pages or inodes dirty even though the file system is already frozen. This creates problems with flusher thread hanging on frozen filesystem. Another problem is that exclusion between ->page_mkwrite() and filesystem freezing has been handled by setting page dirty and then verifying s_frozen. This guaranteed that either the freezing code sees the faulted page, writes it, and writeprotects it again or we see s_frozen set and bail out of page fault. This works to protect from page being marked writeable while filesystem freezing is running but has an unpleasant artefact of leaving dirty (although unmodified and writeprotected) pages on frozen filesystem resulting in similar problems with flusher thread as the first problem. This patch aims at providing exclusion between write paths and filesystem freezing. We implement a writer-freeze read-write semaphore in the superblock. Actually, there are three such semaphores because of lock ranking reasons - one for page fault handlers (->page_mkwrite), one for all other writers, and one of internal filesystem purposes (used e.g. to track running transactions). Write paths which should block freezing (e.g. directory operations, ->aio_write(), ->page_mkwrite) hold reader side of the semaphore. Code freezing the filesystem takes the writer side. Only that we don't really want to bounce cachelines of the semaphores between CPUs for each write happening. So we implement the reader side of the semaphore as a per-cpu counter and the writer side is implemented using s_writers.frozen superblock field. [AV: microoptimize sb_start_write(); we want it fast in normal case] BugLink: https://bugs.launchpad.net/bugs/897421 Tested-by: Kamal Mostafa <kamal@canonical.com> Tested-by: Peter M. Petrakis <peter.petrakis@canonical.com> Tested-by: Dann Frazier <dann.frazier@canonical.com> Tested-by: Massimo Morana <massimo.morana@canonical.com> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-06-12 14:20:34 +00:00
sb_wait_write(sb, SB_FREEZE_WRITE);
if (!super_lock_excl(sb)) {
WARN_ON_ONCE("Dying superblock while freezing!");
return -EINVAL;
}
fs: Improve filesystem freezing handling vfs_check_frozen() tests are racy since the filesystem can be frozen just after the test is performed. Thus in write paths we can end up marking some pages or inodes dirty even though the file system is already frozen. This creates problems with flusher thread hanging on frozen filesystem. Another problem is that exclusion between ->page_mkwrite() and filesystem freezing has been handled by setting page dirty and then verifying s_frozen. This guaranteed that either the freezing code sees the faulted page, writes it, and writeprotects it again or we see s_frozen set and bail out of page fault. This works to protect from page being marked writeable while filesystem freezing is running but has an unpleasant artefact of leaving dirty (although unmodified and writeprotected) pages on frozen filesystem resulting in similar problems with flusher thread as the first problem. This patch aims at providing exclusion between write paths and filesystem freezing. We implement a writer-freeze read-write semaphore in the superblock. Actually, there are three such semaphores because of lock ranking reasons - one for page fault handlers (->page_mkwrite), one for all other writers, and one of internal filesystem purposes (used e.g. to track running transactions). Write paths which should block freezing (e.g. directory operations, ->aio_write(), ->page_mkwrite) hold reader side of the semaphore. Code freezing the filesystem takes the writer side. Only that we don't really want to bounce cachelines of the semaphores between CPUs for each write happening. So we implement the reader side of the semaphore as a per-cpu counter and the writer side is implemented using s_writers.frozen superblock field. [AV: microoptimize sb_start_write(); we want it fast in normal case] BugLink: https://bugs.launchpad.net/bugs/897421 Tested-by: Kamal Mostafa <kamal@canonical.com> Tested-by: Peter M. Petrakis <peter.petrakis@canonical.com> Tested-by: Dann Frazier <dann.frazier@canonical.com> Tested-by: Massimo Morana <massimo.morana@canonical.com> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-06-12 14:20:34 +00:00
/* Now we go and block page faults... */
sb->s_writers.frozen = SB_FREEZE_PAGEFAULT;
sb_wait_write(sb, SB_FREEZE_PAGEFAULT);
/* All writers are done so after syncing there won't be dirty data */
ret = sync_filesystem(sb);
if (ret) {
sb->s_writers.frozen = SB_UNFROZEN;
sb_freeze_unlock(sb, SB_FREEZE_PAGEFAULT);
wake_up_var(&sb->s_writers.frozen);
deactivate_locked_super(sb);
return ret;
}
fs: Improve filesystem freezing handling vfs_check_frozen() tests are racy since the filesystem can be frozen just after the test is performed. Thus in write paths we can end up marking some pages or inodes dirty even though the file system is already frozen. This creates problems with flusher thread hanging on frozen filesystem. Another problem is that exclusion between ->page_mkwrite() and filesystem freezing has been handled by setting page dirty and then verifying s_frozen. This guaranteed that either the freezing code sees the faulted page, writes it, and writeprotects it again or we see s_frozen set and bail out of page fault. This works to protect from page being marked writeable while filesystem freezing is running but has an unpleasant artefact of leaving dirty (although unmodified and writeprotected) pages on frozen filesystem resulting in similar problems with flusher thread as the first problem. This patch aims at providing exclusion between write paths and filesystem freezing. We implement a writer-freeze read-write semaphore in the superblock. Actually, there are three such semaphores because of lock ranking reasons - one for page fault handlers (->page_mkwrite), one for all other writers, and one of internal filesystem purposes (used e.g. to track running transactions). Write paths which should block freezing (e.g. directory operations, ->aio_write(), ->page_mkwrite) hold reader side of the semaphore. Code freezing the filesystem takes the writer side. Only that we don't really want to bounce cachelines of the semaphores between CPUs for each write happening. So we implement the reader side of the semaphore as a per-cpu counter and the writer side is implemented using s_writers.frozen superblock field. [AV: microoptimize sb_start_write(); we want it fast in normal case] BugLink: https://bugs.launchpad.net/bugs/897421 Tested-by: Kamal Mostafa <kamal@canonical.com> Tested-by: Peter M. Petrakis <peter.petrakis@canonical.com> Tested-by: Dann Frazier <dann.frazier@canonical.com> Tested-by: Massimo Morana <massimo.morana@canonical.com> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-06-12 14:20:34 +00:00
/* Now wait for internal filesystem counter */
sb->s_writers.frozen = SB_FREEZE_FS;
sb_wait_write(sb, SB_FREEZE_FS);
if (sb->s_op->freeze_fs) {
ret = sb->s_op->freeze_fs(sb);
if (ret) {
printk(KERN_ERR
"VFS:Filesystem freeze failed\n");
fs: Improve filesystem freezing handling vfs_check_frozen() tests are racy since the filesystem can be frozen just after the test is performed. Thus in write paths we can end up marking some pages or inodes dirty even though the file system is already frozen. This creates problems with flusher thread hanging on frozen filesystem. Another problem is that exclusion between ->page_mkwrite() and filesystem freezing has been handled by setting page dirty and then verifying s_frozen. This guaranteed that either the freezing code sees the faulted page, writes it, and writeprotects it again or we see s_frozen set and bail out of page fault. This works to protect from page being marked writeable while filesystem freezing is running but has an unpleasant artefact of leaving dirty (although unmodified and writeprotected) pages on frozen filesystem resulting in similar problems with flusher thread as the first problem. This patch aims at providing exclusion between write paths and filesystem freezing. We implement a writer-freeze read-write semaphore in the superblock. Actually, there are three such semaphores because of lock ranking reasons - one for page fault handlers (->page_mkwrite), one for all other writers, and one of internal filesystem purposes (used e.g. to track running transactions). Write paths which should block freezing (e.g. directory operations, ->aio_write(), ->page_mkwrite) hold reader side of the semaphore. Code freezing the filesystem takes the writer side. Only that we don't really want to bounce cachelines of the semaphores between CPUs for each write happening. So we implement the reader side of the semaphore as a per-cpu counter and the writer side is implemented using s_writers.frozen superblock field. [AV: microoptimize sb_start_write(); we want it fast in normal case] BugLink: https://bugs.launchpad.net/bugs/897421 Tested-by: Kamal Mostafa <kamal@canonical.com> Tested-by: Peter M. Petrakis <peter.petrakis@canonical.com> Tested-by: Dann Frazier <dann.frazier@canonical.com> Tested-by: Massimo Morana <massimo.morana@canonical.com> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-06-12 14:20:34 +00:00
sb->s_writers.frozen = SB_UNFROZEN;
sb_freeze_unlock(sb, SB_FREEZE_FS);
wake_up_var(&sb->s_writers.frozen);
deactivate_locked_super(sb);
return ret;
}
}
fs: Improve filesystem freezing handling vfs_check_frozen() tests are racy since the filesystem can be frozen just after the test is performed. Thus in write paths we can end up marking some pages or inodes dirty even though the file system is already frozen. This creates problems with flusher thread hanging on frozen filesystem. Another problem is that exclusion between ->page_mkwrite() and filesystem freezing has been handled by setting page dirty and then verifying s_frozen. This guaranteed that either the freezing code sees the faulted page, writes it, and writeprotects it again or we see s_frozen set and bail out of page fault. This works to protect from page being marked writeable while filesystem freezing is running but has an unpleasant artefact of leaving dirty (although unmodified and writeprotected) pages on frozen filesystem resulting in similar problems with flusher thread as the first problem. This patch aims at providing exclusion between write paths and filesystem freezing. We implement a writer-freeze read-write semaphore in the superblock. Actually, there are three such semaphores because of lock ranking reasons - one for page fault handlers (->page_mkwrite), one for all other writers, and one of internal filesystem purposes (used e.g. to track running transactions). Write paths which should block freezing (e.g. directory operations, ->aio_write(), ->page_mkwrite) hold reader side of the semaphore. Code freezing the filesystem takes the writer side. Only that we don't really want to bounce cachelines of the semaphores between CPUs for each write happening. So we implement the reader side of the semaphore as a per-cpu counter and the writer side is implemented using s_writers.frozen superblock field. [AV: microoptimize sb_start_write(); we want it fast in normal case] BugLink: https://bugs.launchpad.net/bugs/897421 Tested-by: Kamal Mostafa <kamal@canonical.com> Tested-by: Peter M. Petrakis <peter.petrakis@canonical.com> Tested-by: Dann Frazier <dann.frazier@canonical.com> Tested-by: Massimo Morana <massimo.morana@canonical.com> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-06-12 14:20:34 +00:00
/*
* For debugging purposes so that fs can warn if it sees write activity
* when frozen is set to SB_FREEZE_COMPLETE, and for thaw_super().
fs: Improve filesystem freezing handling vfs_check_frozen() tests are racy since the filesystem can be frozen just after the test is performed. Thus in write paths we can end up marking some pages or inodes dirty even though the file system is already frozen. This creates problems with flusher thread hanging on frozen filesystem. Another problem is that exclusion between ->page_mkwrite() and filesystem freezing has been handled by setting page dirty and then verifying s_frozen. This guaranteed that either the freezing code sees the faulted page, writes it, and writeprotects it again or we see s_frozen set and bail out of page fault. This works to protect from page being marked writeable while filesystem freezing is running but has an unpleasant artefact of leaving dirty (although unmodified and writeprotected) pages on frozen filesystem resulting in similar problems with flusher thread as the first problem. This patch aims at providing exclusion between write paths and filesystem freezing. We implement a writer-freeze read-write semaphore in the superblock. Actually, there are three such semaphores because of lock ranking reasons - one for page fault handlers (->page_mkwrite), one for all other writers, and one of internal filesystem purposes (used e.g. to track running transactions). Write paths which should block freezing (e.g. directory operations, ->aio_write(), ->page_mkwrite) hold reader side of the semaphore. Code freezing the filesystem takes the writer side. Only that we don't really want to bounce cachelines of the semaphores between CPUs for each write happening. So we implement the reader side of the semaphore as a per-cpu counter and the writer side is implemented using s_writers.frozen superblock field. [AV: microoptimize sb_start_write(); we want it fast in normal case] BugLink: https://bugs.launchpad.net/bugs/897421 Tested-by: Kamal Mostafa <kamal@canonical.com> Tested-by: Peter M. Petrakis <peter.petrakis@canonical.com> Tested-by: Dann Frazier <dann.frazier@canonical.com> Tested-by: Massimo Morana <massimo.morana@canonical.com> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-06-12 14:20:34 +00:00
*/
sb->s_writers.freeze_holders |= who;
fs: Improve filesystem freezing handling vfs_check_frozen() tests are racy since the filesystem can be frozen just after the test is performed. Thus in write paths we can end up marking some pages or inodes dirty even though the file system is already frozen. This creates problems with flusher thread hanging on frozen filesystem. Another problem is that exclusion between ->page_mkwrite() and filesystem freezing has been handled by setting page dirty and then verifying s_frozen. This guaranteed that either the freezing code sees the faulted page, writes it, and writeprotects it again or we see s_frozen set and bail out of page fault. This works to protect from page being marked writeable while filesystem freezing is running but has an unpleasant artefact of leaving dirty (although unmodified and writeprotected) pages on frozen filesystem resulting in similar problems with flusher thread as the first problem. This patch aims at providing exclusion between write paths and filesystem freezing. We implement a writer-freeze read-write semaphore in the superblock. Actually, there are three such semaphores because of lock ranking reasons - one for page fault handlers (->page_mkwrite), one for all other writers, and one of internal filesystem purposes (used e.g. to track running transactions). Write paths which should block freezing (e.g. directory operations, ->aio_write(), ->page_mkwrite) hold reader side of the semaphore. Code freezing the filesystem takes the writer side. Only that we don't really want to bounce cachelines of the semaphores between CPUs for each write happening. So we implement the reader side of the semaphore as a per-cpu counter and the writer side is implemented using s_writers.frozen superblock field. [AV: microoptimize sb_start_write(); we want it fast in normal case] BugLink: https://bugs.launchpad.net/bugs/897421 Tested-by: Kamal Mostafa <kamal@canonical.com> Tested-by: Peter M. Petrakis <peter.petrakis@canonical.com> Tested-by: Dann Frazier <dann.frazier@canonical.com> Tested-by: Massimo Morana <massimo.morana@canonical.com> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-06-12 14:20:34 +00:00
sb->s_writers.frozen = SB_FREEZE_COMPLETE;
wake_up_var(&sb->s_writers.frozen);
lockdep_sb_freeze_release(sb);
super_unlock_excl(sb);
return 0;
}
EXPORT_SYMBOL(freeze_super);
/*
* Undoes the effect of a freeze_super_locked call. If the filesystem is
* frozen both by userspace and the kernel, a thaw call from either source
* removes that state without releasing the other state or unlocking the
* filesystem.
*/
static int thaw_super_locked(struct super_block *sb, enum freeze_holder who)
{
int error;
if (sb->s_writers.frozen == SB_FREEZE_COMPLETE) {
if (!(sb->s_writers.freeze_holders & who)) {
super_unlock_excl(sb);
return -EINVAL;
}
/*
* Freeze is shared with someone else. Release our hold and
* drop the active ref that freeze_super assigned to the
* freezer.
*/
if (sb->s_writers.freeze_holders & ~who) {
sb->s_writers.freeze_holders &= ~who;
deactivate_locked_super(sb);
return 0;
}
} else {
super_unlock_excl(sb);
return -EINVAL;
}
if (sb_rdonly(sb)) {
sb->s_writers.freeze_holders &= ~who;
change sb_writers to use percpu_rw_semaphore We can remove everything from struct sb_writers except frozen and add the array of percpu_rw_semaphore's instead. This patch doesn't remove sb_writers->wait_unfrozen yet, we keep it for get_super_thawed(). We will probably remove it later. This change tries to address the following problems: - Firstly, __sb_start_write() looks simply buggy. It does __sb_end_write() if it sees ->frozen, but if it migrates to another CPU before percpu_counter_dec(), sb_wait_write() can wrongly succeed if there is another task which holds the same "semaphore": sb_wait_write() can miss the result of the previous percpu_counter_inc() but see the result of this percpu_counter_dec(). - As Dave Hansen reports, it is suboptimal. The trivial microbenchmark that writes to a tmpfs file in a loop runs 12% faster if we change this code to rely on RCU and kill the memory barriers. - This code doesn't look simple. It would be better to rely on the generic locking code. According to Dave, this change adds the same performance improvement. Note: with this change both freeze_super() and thaw_super() will do synchronize_sched_expedited() 3 times. This is just ugly. But: - This will be "fixed" by the rcu_sync changes we are going to merge. After that freeze_super()->percpu_down_write() will use synchronize_sched(), and thaw_super() won't use synchronize() at all. This doesn't need any changes in fs/super.c. - Once we merge rcu_sync changes, we can also change super.c so that all wb_write->rw_sem's will share the single ->rss in struct sb_writes, then freeze_super() will need only one synchronize_sched(). Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Jan Kara <jack@suse.com>
2015-08-11 15:05:04 +00:00
sb->s_writers.frozen = SB_UNFROZEN;
wake_up_var(&sb->s_writers.frozen);
goto out;
change sb_writers to use percpu_rw_semaphore We can remove everything from struct sb_writers except frozen and add the array of percpu_rw_semaphore's instead. This patch doesn't remove sb_writers->wait_unfrozen yet, we keep it for get_super_thawed(). We will probably remove it later. This change tries to address the following problems: - Firstly, __sb_start_write() looks simply buggy. It does __sb_end_write() if it sees ->frozen, but if it migrates to another CPU before percpu_counter_dec(), sb_wait_write() can wrongly succeed if there is another task which holds the same "semaphore": sb_wait_write() can miss the result of the previous percpu_counter_inc() but see the result of this percpu_counter_dec(). - As Dave Hansen reports, it is suboptimal. The trivial microbenchmark that writes to a tmpfs file in a loop runs 12% faster if we change this code to rely on RCU and kill the memory barriers. - This code doesn't look simple. It would be better to rely on the generic locking code. According to Dave, this change adds the same performance improvement. Note: with this change both freeze_super() and thaw_super() will do synchronize_sched_expedited() 3 times. This is just ugly. But: - This will be "fixed" by the rcu_sync changes we are going to merge. After that freeze_super()->percpu_down_write() will use synchronize_sched(), and thaw_super() won't use synchronize() at all. This doesn't need any changes in fs/super.c. - Once we merge rcu_sync changes, we can also change super.c so that all wb_write->rw_sem's will share the single ->rss in struct sb_writes, then freeze_super() will need only one synchronize_sched(). Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Jan Kara <jack@suse.com>
2015-08-11 15:05:04 +00:00
}
lockdep_sb_freeze_acquire(sb);
if (sb->s_op->unfreeze_fs) {
error = sb->s_op->unfreeze_fs(sb);
if (error) {
printk(KERN_ERR "VFS:Filesystem thaw failed\n");
lockdep_sb_freeze_release(sb);
super_unlock_excl(sb);
return error;
}
}
sb->s_writers.freeze_holders &= ~who;
fs: Improve filesystem freezing handling vfs_check_frozen() tests are racy since the filesystem can be frozen just after the test is performed. Thus in write paths we can end up marking some pages or inodes dirty even though the file system is already frozen. This creates problems with flusher thread hanging on frozen filesystem. Another problem is that exclusion between ->page_mkwrite() and filesystem freezing has been handled by setting page dirty and then verifying s_frozen. This guaranteed that either the freezing code sees the faulted page, writes it, and writeprotects it again or we see s_frozen set and bail out of page fault. This works to protect from page being marked writeable while filesystem freezing is running but has an unpleasant artefact of leaving dirty (although unmodified and writeprotected) pages on frozen filesystem resulting in similar problems with flusher thread as the first problem. This patch aims at providing exclusion between write paths and filesystem freezing. We implement a writer-freeze read-write semaphore in the superblock. Actually, there are three such semaphores because of lock ranking reasons - one for page fault handlers (->page_mkwrite), one for all other writers, and one of internal filesystem purposes (used e.g. to track running transactions). Write paths which should block freezing (e.g. directory operations, ->aio_write(), ->page_mkwrite) hold reader side of the semaphore. Code freezing the filesystem takes the writer side. Only that we don't really want to bounce cachelines of the semaphores between CPUs for each write happening. So we implement the reader side of the semaphore as a per-cpu counter and the writer side is implemented using s_writers.frozen superblock field. [AV: microoptimize sb_start_write(); we want it fast in normal case] BugLink: https://bugs.launchpad.net/bugs/897421 Tested-by: Kamal Mostafa <kamal@canonical.com> Tested-by: Peter M. Petrakis <peter.petrakis@canonical.com> Tested-by: Dann Frazier <dann.frazier@canonical.com> Tested-by: Massimo Morana <massimo.morana@canonical.com> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-06-12 14:20:34 +00:00
sb->s_writers.frozen = SB_UNFROZEN;
wake_up_var(&sb->s_writers.frozen);
sb_freeze_unlock(sb, SB_FREEZE_FS);
change sb_writers to use percpu_rw_semaphore We can remove everything from struct sb_writers except frozen and add the array of percpu_rw_semaphore's instead. This patch doesn't remove sb_writers->wait_unfrozen yet, we keep it for get_super_thawed(). We will probably remove it later. This change tries to address the following problems: - Firstly, __sb_start_write() looks simply buggy. It does __sb_end_write() if it sees ->frozen, but if it migrates to another CPU before percpu_counter_dec(), sb_wait_write() can wrongly succeed if there is another task which holds the same "semaphore": sb_wait_write() can miss the result of the previous percpu_counter_inc() but see the result of this percpu_counter_dec(). - As Dave Hansen reports, it is suboptimal. The trivial microbenchmark that writes to a tmpfs file in a loop runs 12% faster if we change this code to rely on RCU and kill the memory barriers. - This code doesn't look simple. It would be better to rely on the generic locking code. According to Dave, this change adds the same performance improvement. Note: with this change both freeze_super() and thaw_super() will do synchronize_sched_expedited() 3 times. This is just ugly. But: - This will be "fixed" by the rcu_sync changes we are going to merge. After that freeze_super()->percpu_down_write() will use synchronize_sched(), and thaw_super() won't use synchronize() at all. This doesn't need any changes in fs/super.c. - Once we merge rcu_sync changes, we can also change super.c so that all wb_write->rw_sem's will share the single ->rss in struct sb_writes, then freeze_super() will need only one synchronize_sched(). Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Jan Kara <jack@suse.com>
2015-08-11 15:05:04 +00:00
out:
deactivate_locked_super(sb);
return 0;
}
/**
* thaw_super -- unlock filesystem
* @sb: the super to thaw
* @who: context that wants to freeze
*
* Unlocks the filesystem and marks it writeable again after freeze_super()
* if there are no remaining freezes on the filesystem.
*
* @who should be:
* * %FREEZE_HOLDER_USERSPACE if userspace wants to thaw the fs;
* * %FREEZE_HOLDER_KERNEL if the kernel wants to thaw the fs.
*/
int thaw_super(struct super_block *sb, enum freeze_holder who)
{
if (!super_lock_excl(sb)) {
WARN_ON_ONCE("Dying superblock while thawing!");
return -EINVAL;
}
return thaw_super_locked(sb, who);
}
EXPORT_SYMBOL(thaw_super);
/*
* Create workqueue for deferred direct IO completions. We allocate the
* workqueue when it's first needed. This avoids creating workqueue for
* filesystems that don't need it and also allows us to create the workqueue
* late enough so the we can include s_id in the name of the workqueue.
*/
int sb_init_dio_done_wq(struct super_block *sb)
{
struct workqueue_struct *old;
struct workqueue_struct *wq = alloc_workqueue("dio/%s",
WQ_MEM_RECLAIM, 0,
sb->s_id);
if (!wq)
return -ENOMEM;
/*
* This has to be atomic as more DIOs can race to create the workqueue
*/
old = cmpxchg(&sb->s_dio_done_wq, NULL, wq);
/* Someone created workqueue before us? Free ours... */
if (old)
destroy_workqueue(wq);
return 0;
}
EXPORT_SYMBOL_GPL(sb_init_dio_done_wq);