linux/drivers/md/dm-clone-target.c

2229 lines
54 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright (C) 2019 Arrikto, Inc. All Rights Reserved.
*/
#include <linux/mm.h>
#include <linux/bio.h>
#include <linux/err.h>
#include <linux/hash.h>
#include <linux/list.h>
#include <linux/log2.h>
#include <linux/init.h>
#include <linux/slab.h>
#include <linux/wait.h>
#include <linux/dm-io.h>
#include <linux/mutex.h>
#include <linux/atomic.h>
#include <linux/bitops.h>
#include <linux/blkdev.h>
#include <linux/kdev_t.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/jiffies.h>
#include <linux/mempool.h>
#include <linux/spinlock.h>
#include <linux/blk_types.h>
#include <linux/dm-kcopyd.h>
#include <linux/workqueue.h>
#include <linux/backing-dev.h>
#include <linux/device-mapper.h>
#include "dm.h"
#include "dm-clone-metadata.h"
#define DM_MSG_PREFIX "clone"
/*
* Minimum and maximum allowed region sizes
*/
#define MIN_REGION_SIZE (1 << 3) /* 4KB */
#define MAX_REGION_SIZE (1 << 21) /* 1GB */
#define MIN_HYDRATIONS 256 /* Size of hydration mempool */
#define DEFAULT_HYDRATION_THRESHOLD 1 /* 1 region */
#define DEFAULT_HYDRATION_BATCH_SIZE 1 /* Hydrate in batches of 1 region */
#define COMMIT_PERIOD HZ /* 1 sec */
/*
* Hydration hash table size: 1 << HASH_TABLE_BITS
*/
#define HASH_TABLE_BITS 15
DECLARE_DM_KCOPYD_THROTTLE_WITH_MODULE_PARM(clone_hydration_throttle,
"A percentage of time allocated for hydrating regions");
/* Slab cache for struct dm_clone_region_hydration */
static struct kmem_cache *_hydration_cache;
/* dm-clone metadata modes */
enum clone_metadata_mode {
CM_WRITE, /* metadata may be changed */
CM_READ_ONLY, /* metadata may not be changed */
CM_FAIL, /* all metadata I/O fails */
};
struct hash_table_bucket;
struct clone {
struct dm_target *ti;
struct dm_dev *metadata_dev;
struct dm_dev *dest_dev;
struct dm_dev *source_dev;
unsigned long nr_regions;
sector_t region_size;
unsigned int region_shift;
/*
* A metadata commit and the actions taken in case it fails should run
* as a single atomic step.
*/
struct mutex commit_lock;
struct dm_clone_metadata *cmd;
/* Region hydration hash table */
struct hash_table_bucket *ht;
atomic_t ios_in_flight;
wait_queue_head_t hydration_stopped;
mempool_t hydration_pool;
unsigned long last_commit_jiffies;
/*
* We defer incoming WRITE bios for regions that are not hydrated,
* until after these regions have been hydrated.
*
* Also, we defer REQ_FUA and REQ_PREFLUSH bios, until after the
* metadata have been committed.
*/
spinlock_t lock;
struct bio_list deferred_bios;
struct bio_list deferred_discard_bios;
struct bio_list deferred_flush_bios;
struct bio_list deferred_flush_completions;
/* Maximum number of regions being copied during background hydration. */
unsigned int hydration_threshold;
/* Number of regions to batch together during background hydration. */
unsigned int hydration_batch_size;
/* Which region to hydrate next */
unsigned long hydration_offset;
atomic_t hydrations_in_flight;
/*
* Save a copy of the table line rather than reconstructing it for the
* status.
*/
unsigned int nr_ctr_args;
const char **ctr_args;
struct workqueue_struct *wq;
struct work_struct worker;
struct delayed_work waker;
struct dm_kcopyd_client *kcopyd_client;
enum clone_metadata_mode mode;
unsigned long flags;
};
/*
* dm-clone flags
*/
#define DM_CLONE_DISCARD_PASSDOWN 0
#define DM_CLONE_HYDRATION_ENABLED 1
#define DM_CLONE_HYDRATION_SUSPENDED 2
/*---------------------------------------------------------------------------*/
/*
* Metadata failure handling.
*/
static enum clone_metadata_mode get_clone_mode(struct clone *clone)
{
return READ_ONCE(clone->mode);
}
static const char *clone_device_name(struct clone *clone)
{
return dm_table_device_name(clone->ti->table);
}
static void __set_clone_mode(struct clone *clone, enum clone_metadata_mode new_mode)
{
static const char * const descs[] = {
"read-write",
"read-only",
"fail"
};
enum clone_metadata_mode old_mode = get_clone_mode(clone);
/* Never move out of fail mode */
if (old_mode == CM_FAIL)
new_mode = CM_FAIL;
switch (new_mode) {
case CM_FAIL:
case CM_READ_ONLY:
dm_clone_metadata_set_read_only(clone->cmd);
break;
case CM_WRITE:
dm_clone_metadata_set_read_write(clone->cmd);
break;
}
WRITE_ONCE(clone->mode, new_mode);
if (new_mode != old_mode) {
dm_table_event(clone->ti->table);
DMINFO("%s: Switching to %s mode", clone_device_name(clone),
descs[(int)new_mode]);
}
}
static void __abort_transaction(struct clone *clone)
{
const char *dev_name = clone_device_name(clone);
if (get_clone_mode(clone) >= CM_READ_ONLY)
return;
DMERR("%s: Aborting current metadata transaction", dev_name);
if (dm_clone_metadata_abort(clone->cmd)) {
DMERR("%s: Failed to abort metadata transaction", dev_name);
__set_clone_mode(clone, CM_FAIL);
}
}
static void __reload_in_core_bitset(struct clone *clone)
{
const char *dev_name = clone_device_name(clone);
if (get_clone_mode(clone) == CM_FAIL)
return;
/* Reload the on-disk bitset */
DMINFO("%s: Reloading on-disk bitmap", dev_name);
if (dm_clone_reload_in_core_bitset(clone->cmd)) {
DMERR("%s: Failed to reload on-disk bitmap", dev_name);
__set_clone_mode(clone, CM_FAIL);
}
}
static void __metadata_operation_failed(struct clone *clone, const char *op, int r)
{
DMERR("%s: Metadata operation `%s' failed: error = %d",
clone_device_name(clone), op, r);
__abort_transaction(clone);
__set_clone_mode(clone, CM_READ_ONLY);
/*
* dm_clone_reload_in_core_bitset() may run concurrently with either
* dm_clone_set_region_hydrated() or dm_clone_cond_set_range(), but
* it's safe as we have already set the metadata to read-only mode.
*/
__reload_in_core_bitset(clone);
}
/*---------------------------------------------------------------------------*/
/* Wake up anyone waiting for region hydrations to stop */
static inline void wakeup_hydration_waiters(struct clone *clone)
{
wake_up_all(&clone->hydration_stopped);
}
static inline void wake_worker(struct clone *clone)
{
queue_work(clone->wq, &clone->worker);
}
/*---------------------------------------------------------------------------*/
/*
* bio helper functions.
*/
static inline void remap_to_source(struct clone *clone, struct bio *bio)
{
bio_set_dev(bio, clone->source_dev->bdev);
}
static inline void remap_to_dest(struct clone *clone, struct bio *bio)
{
bio_set_dev(bio, clone->dest_dev->bdev);
}
static bool bio_triggers_commit(struct clone *clone, struct bio *bio)
{
return op_is_flush(bio->bi_opf) &&
dm_clone_changed_this_transaction(clone->cmd);
}
/* Get the address of the region in sectors */
static inline sector_t region_to_sector(struct clone *clone, unsigned long region_nr)
{
return ((sector_t)region_nr << clone->region_shift);
}
/* Get the region number of the bio */
static inline unsigned long bio_to_region(struct clone *clone, struct bio *bio)
{
return (bio->bi_iter.bi_sector >> clone->region_shift);
}
/* Get the region range covered by the bio */
static void bio_region_range(struct clone *clone, struct bio *bio,
dm clone: Fix handling of partial region discards There is a bug in the way dm-clone handles discards, which can lead to discarding the wrong blocks or trying to discard blocks beyond the end of the device. This could lead to data corruption, if the destination device indeed discards the underlying blocks, i.e., if the discard operation results in the original contents of a block to be lost. The root of the problem is the code that calculates the range of regions covered by a discard request and decides which regions to discard. Since dm-clone handles the device in units of regions, we don't discard parts of a region, only whole regions. The range is calculated as: rs = dm_sector_div_up(bio->bi_iter.bi_sector, clone->region_size); re = bio_end_sector(bio) >> clone->region_shift; , where 'rs' is the first region to discard and (re - rs) is the number of regions to discard. The bug manifests when we try to discard part of a single region, i.e., when we try to discard a block with size < region_size, and the discard request both starts at an offset with respect to the beginning of that region and ends before the end of the region. The root cause is the following comparison: if (rs == re) // skip discard and complete original bio immediately , which doesn't take into account that 'rs' might be greater than 're'. Thus, we then issue a discard request for the wrong blocks, instead of skipping the discard all together. Fix the check to also take into account the above case, so we don't end up discarding the wrong blocks. Also, add some range checks to dm_clone_set_region_hydrated() and dm_clone_cond_set_range(), which update dm-clone's region bitmap. Note that the aforementioned bug doesn't cause invalid memory accesses, because dm_clone_is_range_hydrated() returns True for this case, so the checks are just precautionary. Fixes: 7431b7835f55 ("dm: add clone target") Cc: stable@vger.kernel.org # v5.4+ Signed-off-by: Nikos Tsironis <ntsironis@arrikto.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2020-03-27 14:01:08 +00:00
unsigned long *rs, unsigned long *nr_regions)
{
dm clone: Fix handling of partial region discards There is a bug in the way dm-clone handles discards, which can lead to discarding the wrong blocks or trying to discard blocks beyond the end of the device. This could lead to data corruption, if the destination device indeed discards the underlying blocks, i.e., if the discard operation results in the original contents of a block to be lost. The root of the problem is the code that calculates the range of regions covered by a discard request and decides which regions to discard. Since dm-clone handles the device in units of regions, we don't discard parts of a region, only whole regions. The range is calculated as: rs = dm_sector_div_up(bio->bi_iter.bi_sector, clone->region_size); re = bio_end_sector(bio) >> clone->region_shift; , where 'rs' is the first region to discard and (re - rs) is the number of regions to discard. The bug manifests when we try to discard part of a single region, i.e., when we try to discard a block with size < region_size, and the discard request both starts at an offset with respect to the beginning of that region and ends before the end of the region. The root cause is the following comparison: if (rs == re) // skip discard and complete original bio immediately , which doesn't take into account that 'rs' might be greater than 're'. Thus, we then issue a discard request for the wrong blocks, instead of skipping the discard all together. Fix the check to also take into account the above case, so we don't end up discarding the wrong blocks. Also, add some range checks to dm_clone_set_region_hydrated() and dm_clone_cond_set_range(), which update dm-clone's region bitmap. Note that the aforementioned bug doesn't cause invalid memory accesses, because dm_clone_is_range_hydrated() returns True for this case, so the checks are just precautionary. Fixes: 7431b7835f55 ("dm: add clone target") Cc: stable@vger.kernel.org # v5.4+ Signed-off-by: Nikos Tsironis <ntsironis@arrikto.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2020-03-27 14:01:08 +00:00
unsigned long end;
*rs = dm_sector_div_up(bio->bi_iter.bi_sector, clone->region_size);
dm clone: Fix handling of partial region discards There is a bug in the way dm-clone handles discards, which can lead to discarding the wrong blocks or trying to discard blocks beyond the end of the device. This could lead to data corruption, if the destination device indeed discards the underlying blocks, i.e., if the discard operation results in the original contents of a block to be lost. The root of the problem is the code that calculates the range of regions covered by a discard request and decides which regions to discard. Since dm-clone handles the device in units of regions, we don't discard parts of a region, only whole regions. The range is calculated as: rs = dm_sector_div_up(bio->bi_iter.bi_sector, clone->region_size); re = bio_end_sector(bio) >> clone->region_shift; , where 'rs' is the first region to discard and (re - rs) is the number of regions to discard. The bug manifests when we try to discard part of a single region, i.e., when we try to discard a block with size < region_size, and the discard request both starts at an offset with respect to the beginning of that region and ends before the end of the region. The root cause is the following comparison: if (rs == re) // skip discard and complete original bio immediately , which doesn't take into account that 'rs' might be greater than 're'. Thus, we then issue a discard request for the wrong blocks, instead of skipping the discard all together. Fix the check to also take into account the above case, so we don't end up discarding the wrong blocks. Also, add some range checks to dm_clone_set_region_hydrated() and dm_clone_cond_set_range(), which update dm-clone's region bitmap. Note that the aforementioned bug doesn't cause invalid memory accesses, because dm_clone_is_range_hydrated() returns True for this case, so the checks are just precautionary. Fixes: 7431b7835f55 ("dm: add clone target") Cc: stable@vger.kernel.org # v5.4+ Signed-off-by: Nikos Tsironis <ntsironis@arrikto.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2020-03-27 14:01:08 +00:00
end = bio_end_sector(bio) >> clone->region_shift;
if (*rs >= end)
*nr_regions = 0;
else
*nr_regions = end - *rs;
}
/* Check whether a bio overwrites a region */
static inline bool is_overwrite_bio(struct clone *clone, struct bio *bio)
{
return (bio_data_dir(bio) == WRITE && bio_sectors(bio) == clone->region_size);
}
static void fail_bios(struct bio_list *bios, blk_status_t status)
{
struct bio *bio;
while ((bio = bio_list_pop(bios))) {
bio->bi_status = status;
bio_endio(bio);
}
}
static void submit_bios(struct bio_list *bios)
{
struct bio *bio;
struct blk_plug plug;
blk_start_plug(&plug);
while ((bio = bio_list_pop(bios)))
submit_bio_noacct(bio);
blk_finish_plug(&plug);
}
/*
* Submit bio to the underlying device.
*
* If the bio triggers a commit, delay it, until after the metadata have been
* committed.
*
* NOTE: The bio remapping must be performed by the caller.
*/
static void issue_bio(struct clone *clone, struct bio *bio)
{
if (!bio_triggers_commit(clone, bio)) {
submit_bio_noacct(bio);
return;
}
/*
* If the metadata mode is RO or FAIL we won't be able to commit the
* metadata, so we complete the bio with an error.
*/
if (unlikely(get_clone_mode(clone) >= CM_READ_ONLY)) {
bio_io_error(bio);
return;
}
/*
* Batch together any bios that trigger commits and then issue a single
* commit for them in process_deferred_flush_bios().
*/
spin_lock_irq(&clone->lock);
bio_list_add(&clone->deferred_flush_bios, bio);
spin_unlock_irq(&clone->lock);
wake_worker(clone);
}
/*
* Remap bio to the destination device and submit it.
*
* If the bio triggers a commit, delay it, until after the metadata have been
* committed.
*/
static void remap_and_issue(struct clone *clone, struct bio *bio)
{
remap_to_dest(clone, bio);
issue_bio(clone, bio);
}
/*
* Issue bios that have been deferred until after their region has finished
* hydrating.
*
* We delegate the bio submission to the worker thread, so this is safe to call
* from interrupt context.
*/
static void issue_deferred_bios(struct clone *clone, struct bio_list *bios)
{
struct bio *bio;
unsigned long flags;
struct bio_list flush_bios = BIO_EMPTY_LIST;
struct bio_list normal_bios = BIO_EMPTY_LIST;
if (bio_list_empty(bios))
return;
while ((bio = bio_list_pop(bios))) {
if (bio_triggers_commit(clone, bio))
bio_list_add(&flush_bios, bio);
else
bio_list_add(&normal_bios, bio);
}
spin_lock_irqsave(&clone->lock, flags);
bio_list_merge(&clone->deferred_bios, &normal_bios);
bio_list_merge(&clone->deferred_flush_bios, &flush_bios);
spin_unlock_irqrestore(&clone->lock, flags);
wake_worker(clone);
}
static void complete_overwrite_bio(struct clone *clone, struct bio *bio)
{
unsigned long flags;
/*
* If the bio has the REQ_FUA flag set we must commit the metadata
* before signaling its completion.
*
* complete_overwrite_bio() is only called by hydration_complete(),
* after having successfully updated the metadata. This means we don't
* need to call dm_clone_changed_this_transaction() to check if the
* metadata has changed and thus we can avoid taking the metadata spin
* lock.
*/
if (!(bio->bi_opf & REQ_FUA)) {
bio_endio(bio);
return;
}
/*
* If the metadata mode is RO or FAIL we won't be able to commit the
* metadata, so we complete the bio with an error.
*/
if (unlikely(get_clone_mode(clone) >= CM_READ_ONLY)) {
bio_io_error(bio);
return;
}
/*
* Batch together any bios that trigger commits and then issue a single
* commit for them in process_deferred_flush_bios().
*/
spin_lock_irqsave(&clone->lock, flags);
bio_list_add(&clone->deferred_flush_completions, bio);
spin_unlock_irqrestore(&clone->lock, flags);
wake_worker(clone);
}
static void trim_bio(struct bio *bio, sector_t sector, unsigned int len)
{
bio->bi_iter.bi_sector = sector;
bio->bi_iter.bi_size = to_bytes(len);
}
static void complete_discard_bio(struct clone *clone, struct bio *bio, bool success)
{
dm clone: Fix handling of partial region discards There is a bug in the way dm-clone handles discards, which can lead to discarding the wrong blocks or trying to discard blocks beyond the end of the device. This could lead to data corruption, if the destination device indeed discards the underlying blocks, i.e., if the discard operation results in the original contents of a block to be lost. The root of the problem is the code that calculates the range of regions covered by a discard request and decides which regions to discard. Since dm-clone handles the device in units of regions, we don't discard parts of a region, only whole regions. The range is calculated as: rs = dm_sector_div_up(bio->bi_iter.bi_sector, clone->region_size); re = bio_end_sector(bio) >> clone->region_shift; , where 'rs' is the first region to discard and (re - rs) is the number of regions to discard. The bug manifests when we try to discard part of a single region, i.e., when we try to discard a block with size < region_size, and the discard request both starts at an offset with respect to the beginning of that region and ends before the end of the region. The root cause is the following comparison: if (rs == re) // skip discard and complete original bio immediately , which doesn't take into account that 'rs' might be greater than 're'. Thus, we then issue a discard request for the wrong blocks, instead of skipping the discard all together. Fix the check to also take into account the above case, so we don't end up discarding the wrong blocks. Also, add some range checks to dm_clone_set_region_hydrated() and dm_clone_cond_set_range(), which update dm-clone's region bitmap. Note that the aforementioned bug doesn't cause invalid memory accesses, because dm_clone_is_range_hydrated() returns True for this case, so the checks are just precautionary. Fixes: 7431b7835f55 ("dm: add clone target") Cc: stable@vger.kernel.org # v5.4+ Signed-off-by: Nikos Tsironis <ntsironis@arrikto.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2020-03-27 14:01:08 +00:00
unsigned long rs, nr_regions;
/*
* If the destination device supports discards, remap and trim the
* discard bio and pass it down. Otherwise complete the bio
* immediately.
*/
if (test_bit(DM_CLONE_DISCARD_PASSDOWN, &clone->flags) && success) {
remap_to_dest(clone, bio);
dm clone: Fix handling of partial region discards There is a bug in the way dm-clone handles discards, which can lead to discarding the wrong blocks or trying to discard blocks beyond the end of the device. This could lead to data corruption, if the destination device indeed discards the underlying blocks, i.e., if the discard operation results in the original contents of a block to be lost. The root of the problem is the code that calculates the range of regions covered by a discard request and decides which regions to discard. Since dm-clone handles the device in units of regions, we don't discard parts of a region, only whole regions. The range is calculated as: rs = dm_sector_div_up(bio->bi_iter.bi_sector, clone->region_size); re = bio_end_sector(bio) >> clone->region_shift; , where 'rs' is the first region to discard and (re - rs) is the number of regions to discard. The bug manifests when we try to discard part of a single region, i.e., when we try to discard a block with size < region_size, and the discard request both starts at an offset with respect to the beginning of that region and ends before the end of the region. The root cause is the following comparison: if (rs == re) // skip discard and complete original bio immediately , which doesn't take into account that 'rs' might be greater than 're'. Thus, we then issue a discard request for the wrong blocks, instead of skipping the discard all together. Fix the check to also take into account the above case, so we don't end up discarding the wrong blocks. Also, add some range checks to dm_clone_set_region_hydrated() and dm_clone_cond_set_range(), which update dm-clone's region bitmap. Note that the aforementioned bug doesn't cause invalid memory accesses, because dm_clone_is_range_hydrated() returns True for this case, so the checks are just precautionary. Fixes: 7431b7835f55 ("dm: add clone target") Cc: stable@vger.kernel.org # v5.4+ Signed-off-by: Nikos Tsironis <ntsironis@arrikto.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2020-03-27 14:01:08 +00:00
bio_region_range(clone, bio, &rs, &nr_regions);
trim_bio(bio, region_to_sector(clone, rs),
dm clone: Fix handling of partial region discards There is a bug in the way dm-clone handles discards, which can lead to discarding the wrong blocks or trying to discard blocks beyond the end of the device. This could lead to data corruption, if the destination device indeed discards the underlying blocks, i.e., if the discard operation results in the original contents of a block to be lost. The root of the problem is the code that calculates the range of regions covered by a discard request and decides which regions to discard. Since dm-clone handles the device in units of regions, we don't discard parts of a region, only whole regions. The range is calculated as: rs = dm_sector_div_up(bio->bi_iter.bi_sector, clone->region_size); re = bio_end_sector(bio) >> clone->region_shift; , where 'rs' is the first region to discard and (re - rs) is the number of regions to discard. The bug manifests when we try to discard part of a single region, i.e., when we try to discard a block with size < region_size, and the discard request both starts at an offset with respect to the beginning of that region and ends before the end of the region. The root cause is the following comparison: if (rs == re) // skip discard and complete original bio immediately , which doesn't take into account that 'rs' might be greater than 're'. Thus, we then issue a discard request for the wrong blocks, instead of skipping the discard all together. Fix the check to also take into account the above case, so we don't end up discarding the wrong blocks. Also, add some range checks to dm_clone_set_region_hydrated() and dm_clone_cond_set_range(), which update dm-clone's region bitmap. Note that the aforementioned bug doesn't cause invalid memory accesses, because dm_clone_is_range_hydrated() returns True for this case, so the checks are just precautionary. Fixes: 7431b7835f55 ("dm: add clone target") Cc: stable@vger.kernel.org # v5.4+ Signed-off-by: Nikos Tsironis <ntsironis@arrikto.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2020-03-27 14:01:08 +00:00
nr_regions << clone->region_shift);
submit_bio_noacct(bio);
} else
bio_endio(bio);
}
static void process_discard_bio(struct clone *clone, struct bio *bio)
{
dm clone: Fix handling of partial region discards There is a bug in the way dm-clone handles discards, which can lead to discarding the wrong blocks or trying to discard blocks beyond the end of the device. This could lead to data corruption, if the destination device indeed discards the underlying blocks, i.e., if the discard operation results in the original contents of a block to be lost. The root of the problem is the code that calculates the range of regions covered by a discard request and decides which regions to discard. Since dm-clone handles the device in units of regions, we don't discard parts of a region, only whole regions. The range is calculated as: rs = dm_sector_div_up(bio->bi_iter.bi_sector, clone->region_size); re = bio_end_sector(bio) >> clone->region_shift; , where 'rs' is the first region to discard and (re - rs) is the number of regions to discard. The bug manifests when we try to discard part of a single region, i.e., when we try to discard a block with size < region_size, and the discard request both starts at an offset with respect to the beginning of that region and ends before the end of the region. The root cause is the following comparison: if (rs == re) // skip discard and complete original bio immediately , which doesn't take into account that 'rs' might be greater than 're'. Thus, we then issue a discard request for the wrong blocks, instead of skipping the discard all together. Fix the check to also take into account the above case, so we don't end up discarding the wrong blocks. Also, add some range checks to dm_clone_set_region_hydrated() and dm_clone_cond_set_range(), which update dm-clone's region bitmap. Note that the aforementioned bug doesn't cause invalid memory accesses, because dm_clone_is_range_hydrated() returns True for this case, so the checks are just precautionary. Fixes: 7431b7835f55 ("dm: add clone target") Cc: stable@vger.kernel.org # v5.4+ Signed-off-by: Nikos Tsironis <ntsironis@arrikto.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2020-03-27 14:01:08 +00:00
unsigned long rs, nr_regions;
dm clone: Fix handling of partial region discards There is a bug in the way dm-clone handles discards, which can lead to discarding the wrong blocks or trying to discard blocks beyond the end of the device. This could lead to data corruption, if the destination device indeed discards the underlying blocks, i.e., if the discard operation results in the original contents of a block to be lost. The root of the problem is the code that calculates the range of regions covered by a discard request and decides which regions to discard. Since dm-clone handles the device in units of regions, we don't discard parts of a region, only whole regions. The range is calculated as: rs = dm_sector_div_up(bio->bi_iter.bi_sector, clone->region_size); re = bio_end_sector(bio) >> clone->region_shift; , where 'rs' is the first region to discard and (re - rs) is the number of regions to discard. The bug manifests when we try to discard part of a single region, i.e., when we try to discard a block with size < region_size, and the discard request both starts at an offset with respect to the beginning of that region and ends before the end of the region. The root cause is the following comparison: if (rs == re) // skip discard and complete original bio immediately , which doesn't take into account that 'rs' might be greater than 're'. Thus, we then issue a discard request for the wrong blocks, instead of skipping the discard all together. Fix the check to also take into account the above case, so we don't end up discarding the wrong blocks. Also, add some range checks to dm_clone_set_region_hydrated() and dm_clone_cond_set_range(), which update dm-clone's region bitmap. Note that the aforementioned bug doesn't cause invalid memory accesses, because dm_clone_is_range_hydrated() returns True for this case, so the checks are just precautionary. Fixes: 7431b7835f55 ("dm: add clone target") Cc: stable@vger.kernel.org # v5.4+ Signed-off-by: Nikos Tsironis <ntsironis@arrikto.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2020-03-27 14:01:08 +00:00
bio_region_range(clone, bio, &rs, &nr_regions);
if (!nr_regions) {
bio_endio(bio);
return;
}
dm clone: Fix handling of partial region discards There is a bug in the way dm-clone handles discards, which can lead to discarding the wrong blocks or trying to discard blocks beyond the end of the device. This could lead to data corruption, if the destination device indeed discards the underlying blocks, i.e., if the discard operation results in the original contents of a block to be lost. The root of the problem is the code that calculates the range of regions covered by a discard request and decides which regions to discard. Since dm-clone handles the device in units of regions, we don't discard parts of a region, only whole regions. The range is calculated as: rs = dm_sector_div_up(bio->bi_iter.bi_sector, clone->region_size); re = bio_end_sector(bio) >> clone->region_shift; , where 'rs' is the first region to discard and (re - rs) is the number of regions to discard. The bug manifests when we try to discard part of a single region, i.e., when we try to discard a block with size < region_size, and the discard request both starts at an offset with respect to the beginning of that region and ends before the end of the region. The root cause is the following comparison: if (rs == re) // skip discard and complete original bio immediately , which doesn't take into account that 'rs' might be greater than 're'. Thus, we then issue a discard request for the wrong blocks, instead of skipping the discard all together. Fix the check to also take into account the above case, so we don't end up discarding the wrong blocks. Also, add some range checks to dm_clone_set_region_hydrated() and dm_clone_cond_set_range(), which update dm-clone's region bitmap. Note that the aforementioned bug doesn't cause invalid memory accesses, because dm_clone_is_range_hydrated() returns True for this case, so the checks are just precautionary. Fixes: 7431b7835f55 ("dm: add clone target") Cc: stable@vger.kernel.org # v5.4+ Signed-off-by: Nikos Tsironis <ntsironis@arrikto.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2020-03-27 14:01:08 +00:00
if (WARN_ON(rs >= clone->nr_regions || (rs + nr_regions) < rs ||
(rs + nr_regions) > clone->nr_regions)) {
DMERR("%s: Invalid range (%lu + %lu, total regions %lu) for discard (%llu + %u)",
clone_device_name(clone), rs, nr_regions,
clone->nr_regions,
(unsigned long long)bio->bi_iter.bi_sector,
bio_sectors(bio));
bio_endio(bio);
return;
}
/*
* The covered regions are already hydrated so we just need to pass
* down the discard.
*/
dm clone: Fix handling of partial region discards There is a bug in the way dm-clone handles discards, which can lead to discarding the wrong blocks or trying to discard blocks beyond the end of the device. This could lead to data corruption, if the destination device indeed discards the underlying blocks, i.e., if the discard operation results in the original contents of a block to be lost. The root of the problem is the code that calculates the range of regions covered by a discard request and decides which regions to discard. Since dm-clone handles the device in units of regions, we don't discard parts of a region, only whole regions. The range is calculated as: rs = dm_sector_div_up(bio->bi_iter.bi_sector, clone->region_size); re = bio_end_sector(bio) >> clone->region_shift; , where 'rs' is the first region to discard and (re - rs) is the number of regions to discard. The bug manifests when we try to discard part of a single region, i.e., when we try to discard a block with size < region_size, and the discard request both starts at an offset with respect to the beginning of that region and ends before the end of the region. The root cause is the following comparison: if (rs == re) // skip discard and complete original bio immediately , which doesn't take into account that 'rs' might be greater than 're'. Thus, we then issue a discard request for the wrong blocks, instead of skipping the discard all together. Fix the check to also take into account the above case, so we don't end up discarding the wrong blocks. Also, add some range checks to dm_clone_set_region_hydrated() and dm_clone_cond_set_range(), which update dm-clone's region bitmap. Note that the aforementioned bug doesn't cause invalid memory accesses, because dm_clone_is_range_hydrated() returns True for this case, so the checks are just precautionary. Fixes: 7431b7835f55 ("dm: add clone target") Cc: stable@vger.kernel.org # v5.4+ Signed-off-by: Nikos Tsironis <ntsironis@arrikto.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2020-03-27 14:01:08 +00:00
if (dm_clone_is_range_hydrated(clone->cmd, rs, nr_regions)) {
complete_discard_bio(clone, bio, true);
return;
}
/*
* If the metadata mode is RO or FAIL we won't be able to update the
* metadata for the regions covered by the discard so we just ignore
* it.
*/
if (unlikely(get_clone_mode(clone) >= CM_READ_ONLY)) {
bio_endio(bio);
return;
}
/*
* Defer discard processing.
*/
spin_lock_irq(&clone->lock);
bio_list_add(&clone->deferred_discard_bios, bio);
spin_unlock_irq(&clone->lock);
wake_worker(clone);
}
/*---------------------------------------------------------------------------*/
/*
* dm-clone region hydrations.
*/
struct dm_clone_region_hydration {
struct clone *clone;
unsigned long region_nr;
struct bio *overwrite_bio;
bio_end_io_t *overwrite_bio_end_io;
struct bio_list deferred_bios;
blk_status_t status;
/* Used by hydration batching */
struct list_head list;
/* Used by hydration hash table */
struct hlist_node h;
};
/*
* Hydration hash table implementation.
*
* Ideally we would like to use list_bl, which uses bit spin locks and employs
* the least significant bit of the list head to lock the corresponding bucket,
* reducing the memory overhead for the locks. But, currently, list_bl and bit
* spin locks don't support IRQ safe versions. Since we have to take the lock
* in both process and interrupt context, we must fall back to using regular
* spin locks; one per hash table bucket.
*/
struct hash_table_bucket {
struct hlist_head head;
/* Spinlock protecting the bucket */
spinlock_t lock;
};
#define bucket_lock_irqsave(bucket, flags) \
spin_lock_irqsave(&(bucket)->lock, flags)
#define bucket_unlock_irqrestore(bucket, flags) \
spin_unlock_irqrestore(&(bucket)->lock, flags)
#define bucket_lock_irq(bucket) \
spin_lock_irq(&(bucket)->lock)
#define bucket_unlock_irq(bucket) \
spin_unlock_irq(&(bucket)->lock)
static int hash_table_init(struct clone *clone)
{
unsigned int i, sz;
struct hash_table_bucket *bucket;
sz = 1 << HASH_TABLE_BITS;
clone->ht = kvmalloc_array(sz, sizeof(struct hash_table_bucket), GFP_KERNEL);
if (!clone->ht)
return -ENOMEM;
for (i = 0; i < sz; i++) {
bucket = clone->ht + i;
INIT_HLIST_HEAD(&bucket->head);
spin_lock_init(&bucket->lock);
}
return 0;
}
static void hash_table_exit(struct clone *clone)
{
kvfree(clone->ht);
}
static struct hash_table_bucket *get_hash_table_bucket(struct clone *clone,
unsigned long region_nr)
{
return &clone->ht[hash_long(region_nr, HASH_TABLE_BITS)];
}
/*
* Search hash table for a hydration with hd->region_nr == region_nr
*
* NOTE: Must be called with the bucket lock held
*/
static struct dm_clone_region_hydration *__hash_find(struct hash_table_bucket *bucket,
unsigned long region_nr)
{
struct dm_clone_region_hydration *hd;
hlist_for_each_entry(hd, &bucket->head, h) {
if (hd->region_nr == region_nr)
return hd;
}
return NULL;
}
/*
* Insert a hydration into the hash table.
*
* NOTE: Must be called with the bucket lock held.
*/
static inline void __insert_region_hydration(struct hash_table_bucket *bucket,
struct dm_clone_region_hydration *hd)
{
hlist_add_head(&hd->h, &bucket->head);
}
/*
* This function inserts a hydration into the hash table, unless someone else
* managed to insert a hydration for the same region first. In the latter case
* it returns the existing hydration descriptor for this region.
*
* NOTE: Must be called with the hydration hash table lock held.
*/
static struct dm_clone_region_hydration *
__find_or_insert_region_hydration(struct hash_table_bucket *bucket,
struct dm_clone_region_hydration *hd)
{
struct dm_clone_region_hydration *hd2;
hd2 = __hash_find(bucket, hd->region_nr);
if (hd2)
return hd2;
__insert_region_hydration(bucket, hd);
return hd;
}
/*---------------------------------------------------------------------------*/
/* Allocate a hydration */
static struct dm_clone_region_hydration *alloc_hydration(struct clone *clone)
{
struct dm_clone_region_hydration *hd;
/*
* Allocate a hydration from the hydration mempool.
* This might block but it can't fail.
*/
hd = mempool_alloc(&clone->hydration_pool, GFP_NOIO);
hd->clone = clone;
return hd;
}
static inline void free_hydration(struct dm_clone_region_hydration *hd)
{
mempool_free(hd, &hd->clone->hydration_pool);
}
/* Initialize a hydration */
static void hydration_init(struct dm_clone_region_hydration *hd, unsigned long region_nr)
{
hd->region_nr = region_nr;
hd->overwrite_bio = NULL;
bio_list_init(&hd->deferred_bios);
hd->status = 0;
INIT_LIST_HEAD(&hd->list);
INIT_HLIST_NODE(&hd->h);
}
/*---------------------------------------------------------------------------*/
/*
* Update dm-clone's metadata after a region has finished hydrating and remove
* hydration from the hash table.
*/
static int hydration_update_metadata(struct dm_clone_region_hydration *hd)
{
int r = 0;
unsigned long flags;
struct hash_table_bucket *bucket;
struct clone *clone = hd->clone;
if (unlikely(get_clone_mode(clone) >= CM_READ_ONLY))
r = -EPERM;
/* Update the metadata */
if (likely(!r) && hd->status == BLK_STS_OK)
r = dm_clone_set_region_hydrated(clone->cmd, hd->region_nr);
bucket = get_hash_table_bucket(clone, hd->region_nr);
/* Remove hydration from hash table */
bucket_lock_irqsave(bucket, flags);
hlist_del(&hd->h);
bucket_unlock_irqrestore(bucket, flags);
return r;
}
/*
* Complete a region's hydration:
*
* 1. Update dm-clone's metadata.
* 2. Remove hydration from hash table.
* 3. Complete overwrite bio.
* 4. Issue deferred bios.
* 5. If this was the last hydration, wake up anyone waiting for
* hydrations to finish.
*/
static void hydration_complete(struct dm_clone_region_hydration *hd)
{
int r;
blk_status_t status;
struct clone *clone = hd->clone;
r = hydration_update_metadata(hd);
if (hd->status == BLK_STS_OK && likely(!r)) {
if (hd->overwrite_bio)
complete_overwrite_bio(clone, hd->overwrite_bio);
issue_deferred_bios(clone, &hd->deferred_bios);
} else {
status = r ? BLK_STS_IOERR : hd->status;
if (hd->overwrite_bio)
bio_list_add(&hd->deferred_bios, hd->overwrite_bio);
fail_bios(&hd->deferred_bios, status);
}
free_hydration(hd);
if (atomic_dec_and_test(&clone->hydrations_in_flight))
wakeup_hydration_waiters(clone);
}
static void hydration_kcopyd_callback(int read_err, unsigned long write_err, void *context)
{
blk_status_t status;
struct dm_clone_region_hydration *tmp, *hd = context;
struct clone *clone = hd->clone;
LIST_HEAD(batched_hydrations);
if (read_err || write_err) {
DMERR_LIMIT("%s: hydration failed", clone_device_name(clone));
status = BLK_STS_IOERR;
} else {
status = BLK_STS_OK;
}
list_splice_tail(&hd->list, &batched_hydrations);
hd->status = status;
hydration_complete(hd);
/* Complete batched hydrations */
list_for_each_entry_safe(hd, tmp, &batched_hydrations, list) {
hd->status = status;
hydration_complete(hd);
}
/* Continue background hydration, if there is no I/O in-flight */
if (test_bit(DM_CLONE_HYDRATION_ENABLED, &clone->flags) &&
!atomic_read(&clone->ios_in_flight))
wake_worker(clone);
}
static void hydration_copy(struct dm_clone_region_hydration *hd, unsigned int nr_regions)
{
unsigned long region_start, region_end;
sector_t tail_size, region_size, total_size;
struct dm_io_region from, to;
struct clone *clone = hd->clone;
if (WARN_ON(!nr_regions))
return;
region_size = clone->region_size;
region_start = hd->region_nr;
region_end = region_start + nr_regions - 1;
total_size = region_to_sector(clone, nr_regions - 1);
if (region_end == clone->nr_regions - 1) {
/*
* The last region of the target might be smaller than
* region_size.
*/
tail_size = clone->ti->len & (region_size - 1);
if (!tail_size)
tail_size = region_size;
} else {
tail_size = region_size;
}
total_size += tail_size;
from.bdev = clone->source_dev->bdev;
from.sector = region_to_sector(clone, region_start);
from.count = total_size;
to.bdev = clone->dest_dev->bdev;
to.sector = from.sector;
to.count = from.count;
/* Issue copy */
atomic_add(nr_regions, &clone->hydrations_in_flight);
dm_kcopyd_copy(clone->kcopyd_client, &from, 1, &to, 0,
hydration_kcopyd_callback, hd);
}
static void overwrite_endio(struct bio *bio)
{
struct dm_clone_region_hydration *hd = bio->bi_private;
bio->bi_end_io = hd->overwrite_bio_end_io;
hd->status = bio->bi_status;
hydration_complete(hd);
}
static void hydration_overwrite(struct dm_clone_region_hydration *hd, struct bio *bio)
{
/*
* We don't need to save and restore bio->bi_private because device
* mapper core generates a new bio for us to use, with clean
* bi_private.
*/
hd->overwrite_bio = bio;
hd->overwrite_bio_end_io = bio->bi_end_io;
bio->bi_end_io = overwrite_endio;
bio->bi_private = hd;
atomic_inc(&hd->clone->hydrations_in_flight);
submit_bio_noacct(bio);
}
/*
* Hydrate bio's region.
*
* This function starts the hydration of the bio's region and puts the bio in
* the list of deferred bios for this region. In case, by the time this
* function is called, the region has finished hydrating it's submitted to the
* destination device.
*
* NOTE: The bio remapping must be performed by the caller.
*/
static void hydrate_bio_region(struct clone *clone, struct bio *bio)
{
unsigned long region_nr;
struct hash_table_bucket *bucket;
struct dm_clone_region_hydration *hd, *hd2;
region_nr = bio_to_region(clone, bio);
bucket = get_hash_table_bucket(clone, region_nr);
bucket_lock_irq(bucket);
hd = __hash_find(bucket, region_nr);
if (hd) {
/* Someone else is hydrating the region */
bio_list_add(&hd->deferred_bios, bio);
bucket_unlock_irq(bucket);
return;
}
if (dm_clone_is_region_hydrated(clone->cmd, region_nr)) {
/* The region has been hydrated */
bucket_unlock_irq(bucket);
issue_bio(clone, bio);
return;
}
/*
* We must allocate a hydration descriptor and start the hydration of
* the corresponding region.
*/
bucket_unlock_irq(bucket);
hd = alloc_hydration(clone);
hydration_init(hd, region_nr);
bucket_lock_irq(bucket);
/* Check if the region has been hydrated in the meantime. */
if (dm_clone_is_region_hydrated(clone->cmd, region_nr)) {
bucket_unlock_irq(bucket);
free_hydration(hd);
issue_bio(clone, bio);
return;
}
hd2 = __find_or_insert_region_hydration(bucket, hd);
if (hd2 != hd) {
/* Someone else started the region's hydration. */
bio_list_add(&hd2->deferred_bios, bio);
bucket_unlock_irq(bucket);
free_hydration(hd);
return;
}
/*
* If the metadata mode is RO or FAIL then there is no point starting a
* hydration, since we will not be able to update the metadata when the
* hydration finishes.
*/
if (unlikely(get_clone_mode(clone) >= CM_READ_ONLY)) {
hlist_del(&hd->h);
bucket_unlock_irq(bucket);
free_hydration(hd);
bio_io_error(bio);
return;
}
/*
* Start region hydration.
*
* If a bio overwrites a region, i.e., its size is equal to the
* region's size, then we don't need to copy the region from the source
* to the destination device.
*/
if (is_overwrite_bio(clone, bio)) {
bucket_unlock_irq(bucket);
hydration_overwrite(hd, bio);
} else {
bio_list_add(&hd->deferred_bios, bio);
bucket_unlock_irq(bucket);
hydration_copy(hd, 1);
}
}
/*---------------------------------------------------------------------------*/
/*
* Background hydrations.
*/
/*
* Batch region hydrations.
*
* To better utilize device bandwidth we batch together the hydration of
* adjacent regions. This allows us to use small region sizes, e.g., 4KB, which
* is good for small, random write performance (because of the overwriting of
* un-hydrated regions) and at the same time issue big copy requests to kcopyd
* to achieve high hydration bandwidth.
*/
struct batch_info {
struct dm_clone_region_hydration *head;
unsigned int nr_batched_regions;
};
static void __batch_hydration(struct batch_info *batch,
struct dm_clone_region_hydration *hd)
{
struct clone *clone = hd->clone;
unsigned int max_batch_size = READ_ONCE(clone->hydration_batch_size);
if (batch->head) {
/* Try to extend the current batch */
if (batch->nr_batched_regions < max_batch_size &&
(batch->head->region_nr + batch->nr_batched_regions) == hd->region_nr) {
list_add_tail(&hd->list, &batch->head->list);
batch->nr_batched_regions++;
hd = NULL;
}
/* Check if we should issue the current batch */
if (batch->nr_batched_regions >= max_batch_size || hd) {
hydration_copy(batch->head, batch->nr_batched_regions);
batch->head = NULL;
batch->nr_batched_regions = 0;
}
}
if (!hd)
return;
/* We treat max batch sizes of zero and one equivalently */
if (max_batch_size <= 1) {
hydration_copy(hd, 1);
return;
}
/* Start a new batch */
BUG_ON(!list_empty(&hd->list));
batch->head = hd;
batch->nr_batched_regions = 1;
}
static unsigned long __start_next_hydration(struct clone *clone,
unsigned long offset,
struct batch_info *batch)
{
struct hash_table_bucket *bucket;
struct dm_clone_region_hydration *hd;
unsigned long nr_regions = clone->nr_regions;
hd = alloc_hydration(clone);
/* Try to find a region to hydrate. */
do {
offset = dm_clone_find_next_unhydrated_region(clone->cmd, offset);
if (offset == nr_regions)
break;
bucket = get_hash_table_bucket(clone, offset);
bucket_lock_irq(bucket);
if (!dm_clone_is_region_hydrated(clone->cmd, offset) &&
!__hash_find(bucket, offset)) {
hydration_init(hd, offset);
__insert_region_hydration(bucket, hd);
bucket_unlock_irq(bucket);
/* Batch hydration */
__batch_hydration(batch, hd);
return (offset + 1);
}
bucket_unlock_irq(bucket);
} while (++offset < nr_regions);
if (hd)
free_hydration(hd);
return offset;
}
/*
* This function searches for regions that still reside in the source device
* and starts their hydration.
*/
static void do_hydration(struct clone *clone)
{
unsigned int current_volume;
unsigned long offset, nr_regions = clone->nr_regions;
struct batch_info batch = {
.head = NULL,
.nr_batched_regions = 0,
};
if (unlikely(get_clone_mode(clone) >= CM_READ_ONLY))
return;
if (dm_clone_is_hydration_done(clone->cmd))
return;
/*
* Avoid race with device suspension.
*/
atomic_inc(&clone->hydrations_in_flight);
/*
* Make sure atomic_inc() is ordered before test_bit(), otherwise we
* might race with clone_postsuspend() and start a region hydration
* after the target has been suspended.
*
* This is paired with the smp_mb__after_atomic() in
* clone_postsuspend().
*/
smp_mb__after_atomic();
offset = clone->hydration_offset;
while (likely(!test_bit(DM_CLONE_HYDRATION_SUSPENDED, &clone->flags)) &&
!atomic_read(&clone->ios_in_flight) &&
test_bit(DM_CLONE_HYDRATION_ENABLED, &clone->flags) &&
offset < nr_regions) {
current_volume = atomic_read(&clone->hydrations_in_flight);
current_volume += batch.nr_batched_regions;
if (current_volume > READ_ONCE(clone->hydration_threshold))
break;
offset = __start_next_hydration(clone, offset, &batch);
}
if (batch.head)
hydration_copy(batch.head, batch.nr_batched_regions);
if (offset >= nr_regions)
offset = 0;
clone->hydration_offset = offset;
if (atomic_dec_and_test(&clone->hydrations_in_flight))
wakeup_hydration_waiters(clone);
}
/*---------------------------------------------------------------------------*/
static bool need_commit_due_to_time(struct clone *clone)
{
return !time_in_range(jiffies, clone->last_commit_jiffies,
clone->last_commit_jiffies + COMMIT_PERIOD);
}
/*
* A non-zero return indicates read-only or fail mode.
*/
dm clone: Flush destination device before committing metadata dm-clone maintains an on-disk bitmap which records which regions are valid in the destination device, i.e., which regions have already been hydrated, or have been written to directly, via user I/O. Setting a bit in the on-disk bitmap meas the corresponding region is valid in the destination device and we redirect all I/O regarding it to the destination device. Suppose the destination device has a volatile write-back cache and the following sequence of events occur: 1. A region gets hydrated, either through the background hydration or because it was written to directly, via user I/O. 2. The commit timeout expires and we commit the metadata, marking that region as valid in the destination device. 3. The system crashes and the destination device's cache has not been flushed, meaning the region's data are lost. The next time we read that region we read it from the destination device, since the metadata have been successfully committed, but the data are lost due to the crash, so we read garbage instead of the old data. This has several implications: 1. In case of background hydration or of writes with size smaller than the region size (which means we first copy the whole region and then issue the smaller write), we corrupt data that the user never touched. 2. In case of writes with size equal to the device's logical block size, we fail to provide atomic sector writes. When the system recovers the user will read garbage from the sector instead of the old data or the new data. 3. In case of writes without the FUA flag set, after the system recovers, the written sectors will contain garbage instead of a random mix of sectors containing either old data or new data, thus we fail again to provide atomic sector writes. 4. Even when the user flushes the dm-clone device, because we first commit the metadata and then pass down the flush, the same risk for corruption exists (if the system crashes after the metadata have been committed but before the flush is passed down). The only case which is unaffected is that of writes with size equal to the region size and with the FUA flag set. But, because FUA writes trigger metadata commits, this case can trigger the corruption indirectly. To solve this and avoid the potential data corruption we flush the destination device **before** committing the metadata. This ensures that any freshly hydrated regions, for which we commit the metadata, are properly written to non-volatile storage and won't be lost in case of a crash. Fixes: 7431b7835f55 ("dm: add clone target") Cc: stable@vger.kernel.org # v5.4+ Signed-off-by: Nikos Tsironis <ntsironis@arrikto.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2019-12-04 14:06:54 +00:00
static int commit_metadata(struct clone *clone, bool *dest_dev_flushed)
{
int r = 0;
dm clone: Flush destination device before committing metadata dm-clone maintains an on-disk bitmap which records which regions are valid in the destination device, i.e., which regions have already been hydrated, or have been written to directly, via user I/O. Setting a bit in the on-disk bitmap meas the corresponding region is valid in the destination device and we redirect all I/O regarding it to the destination device. Suppose the destination device has a volatile write-back cache and the following sequence of events occur: 1. A region gets hydrated, either through the background hydration or because it was written to directly, via user I/O. 2. The commit timeout expires and we commit the metadata, marking that region as valid in the destination device. 3. The system crashes and the destination device's cache has not been flushed, meaning the region's data are lost. The next time we read that region we read it from the destination device, since the metadata have been successfully committed, but the data are lost due to the crash, so we read garbage instead of the old data. This has several implications: 1. In case of background hydration or of writes with size smaller than the region size (which means we first copy the whole region and then issue the smaller write), we corrupt data that the user never touched. 2. In case of writes with size equal to the device's logical block size, we fail to provide atomic sector writes. When the system recovers the user will read garbage from the sector instead of the old data or the new data. 3. In case of writes without the FUA flag set, after the system recovers, the written sectors will contain garbage instead of a random mix of sectors containing either old data or new data, thus we fail again to provide atomic sector writes. 4. Even when the user flushes the dm-clone device, because we first commit the metadata and then pass down the flush, the same risk for corruption exists (if the system crashes after the metadata have been committed but before the flush is passed down). The only case which is unaffected is that of writes with size equal to the region size and with the FUA flag set. But, because FUA writes trigger metadata commits, this case can trigger the corruption indirectly. To solve this and avoid the potential data corruption we flush the destination device **before** committing the metadata. This ensures that any freshly hydrated regions, for which we commit the metadata, are properly written to non-volatile storage and won't be lost in case of a crash. Fixes: 7431b7835f55 ("dm: add clone target") Cc: stable@vger.kernel.org # v5.4+ Signed-off-by: Nikos Tsironis <ntsironis@arrikto.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2019-12-04 14:06:54 +00:00
if (dest_dev_flushed)
*dest_dev_flushed = false;
mutex_lock(&clone->commit_lock);
if (!dm_clone_changed_this_transaction(clone->cmd))
goto out;
if (unlikely(get_clone_mode(clone) >= CM_READ_ONLY)) {
r = -EPERM;
goto out;
}
r = dm_clone_metadata_pre_commit(clone->cmd);
if (unlikely(r)) {
__metadata_operation_failed(clone, "dm_clone_metadata_pre_commit", r);
goto out;
}
r = blkdev_issue_flush(clone->dest_dev->bdev);
dm clone: Flush destination device before committing metadata dm-clone maintains an on-disk bitmap which records which regions are valid in the destination device, i.e., which regions have already been hydrated, or have been written to directly, via user I/O. Setting a bit in the on-disk bitmap meas the corresponding region is valid in the destination device and we redirect all I/O regarding it to the destination device. Suppose the destination device has a volatile write-back cache and the following sequence of events occur: 1. A region gets hydrated, either through the background hydration or because it was written to directly, via user I/O. 2. The commit timeout expires and we commit the metadata, marking that region as valid in the destination device. 3. The system crashes and the destination device's cache has not been flushed, meaning the region's data are lost. The next time we read that region we read it from the destination device, since the metadata have been successfully committed, but the data are lost due to the crash, so we read garbage instead of the old data. This has several implications: 1. In case of background hydration or of writes with size smaller than the region size (which means we first copy the whole region and then issue the smaller write), we corrupt data that the user never touched. 2. In case of writes with size equal to the device's logical block size, we fail to provide atomic sector writes. When the system recovers the user will read garbage from the sector instead of the old data or the new data. 3. In case of writes without the FUA flag set, after the system recovers, the written sectors will contain garbage instead of a random mix of sectors containing either old data or new data, thus we fail again to provide atomic sector writes. 4. Even when the user flushes the dm-clone device, because we first commit the metadata and then pass down the flush, the same risk for corruption exists (if the system crashes after the metadata have been committed but before the flush is passed down). The only case which is unaffected is that of writes with size equal to the region size and with the FUA flag set. But, because FUA writes trigger metadata commits, this case can trigger the corruption indirectly. To solve this and avoid the potential data corruption we flush the destination device **before** committing the metadata. This ensures that any freshly hydrated regions, for which we commit the metadata, are properly written to non-volatile storage and won't be lost in case of a crash. Fixes: 7431b7835f55 ("dm: add clone target") Cc: stable@vger.kernel.org # v5.4+ Signed-off-by: Nikos Tsironis <ntsironis@arrikto.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2019-12-04 14:06:54 +00:00
if (unlikely(r)) {
__metadata_operation_failed(clone, "flush destination device", r);
goto out;
}
if (dest_dev_flushed)
*dest_dev_flushed = true;
r = dm_clone_metadata_commit(clone->cmd);
if (unlikely(r)) {
__metadata_operation_failed(clone, "dm_clone_metadata_commit", r);
goto out;
}
if (dm_clone_is_hydration_done(clone->cmd))
dm_table_event(clone->ti->table);
out:
mutex_unlock(&clone->commit_lock);
return r;
}
static void process_deferred_discards(struct clone *clone)
{
int r = -EPERM;
struct bio *bio;
struct blk_plug plug;
dm clone: Fix handling of partial region discards There is a bug in the way dm-clone handles discards, which can lead to discarding the wrong blocks or trying to discard blocks beyond the end of the device. This could lead to data corruption, if the destination device indeed discards the underlying blocks, i.e., if the discard operation results in the original contents of a block to be lost. The root of the problem is the code that calculates the range of regions covered by a discard request and decides which regions to discard. Since dm-clone handles the device in units of regions, we don't discard parts of a region, only whole regions. The range is calculated as: rs = dm_sector_div_up(bio->bi_iter.bi_sector, clone->region_size); re = bio_end_sector(bio) >> clone->region_shift; , where 'rs' is the first region to discard and (re - rs) is the number of regions to discard. The bug manifests when we try to discard part of a single region, i.e., when we try to discard a block with size < region_size, and the discard request both starts at an offset with respect to the beginning of that region and ends before the end of the region. The root cause is the following comparison: if (rs == re) // skip discard and complete original bio immediately , which doesn't take into account that 'rs' might be greater than 're'. Thus, we then issue a discard request for the wrong blocks, instead of skipping the discard all together. Fix the check to also take into account the above case, so we don't end up discarding the wrong blocks. Also, add some range checks to dm_clone_set_region_hydrated() and dm_clone_cond_set_range(), which update dm-clone's region bitmap. Note that the aforementioned bug doesn't cause invalid memory accesses, because dm_clone_is_range_hydrated() returns True for this case, so the checks are just precautionary. Fixes: 7431b7835f55 ("dm: add clone target") Cc: stable@vger.kernel.org # v5.4+ Signed-off-by: Nikos Tsironis <ntsironis@arrikto.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2020-03-27 14:01:08 +00:00
unsigned long rs, nr_regions;
struct bio_list discards = BIO_EMPTY_LIST;
spin_lock_irq(&clone->lock);
bio_list_merge(&discards, &clone->deferred_discard_bios);
bio_list_init(&clone->deferred_discard_bios);
spin_unlock_irq(&clone->lock);
if (bio_list_empty(&discards))
return;
if (unlikely(get_clone_mode(clone) >= CM_READ_ONLY))
goto out;
/* Update the metadata */
bio_list_for_each(bio, &discards) {
dm clone: Fix handling of partial region discards There is a bug in the way dm-clone handles discards, which can lead to discarding the wrong blocks or trying to discard blocks beyond the end of the device. This could lead to data corruption, if the destination device indeed discards the underlying blocks, i.e., if the discard operation results in the original contents of a block to be lost. The root of the problem is the code that calculates the range of regions covered by a discard request and decides which regions to discard. Since dm-clone handles the device in units of regions, we don't discard parts of a region, only whole regions. The range is calculated as: rs = dm_sector_div_up(bio->bi_iter.bi_sector, clone->region_size); re = bio_end_sector(bio) >> clone->region_shift; , where 'rs' is the first region to discard and (re - rs) is the number of regions to discard. The bug manifests when we try to discard part of a single region, i.e., when we try to discard a block with size < region_size, and the discard request both starts at an offset with respect to the beginning of that region and ends before the end of the region. The root cause is the following comparison: if (rs == re) // skip discard and complete original bio immediately , which doesn't take into account that 'rs' might be greater than 're'. Thus, we then issue a discard request for the wrong blocks, instead of skipping the discard all together. Fix the check to also take into account the above case, so we don't end up discarding the wrong blocks. Also, add some range checks to dm_clone_set_region_hydrated() and dm_clone_cond_set_range(), which update dm-clone's region bitmap. Note that the aforementioned bug doesn't cause invalid memory accesses, because dm_clone_is_range_hydrated() returns True for this case, so the checks are just precautionary. Fixes: 7431b7835f55 ("dm: add clone target") Cc: stable@vger.kernel.org # v5.4+ Signed-off-by: Nikos Tsironis <ntsironis@arrikto.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2020-03-27 14:01:08 +00:00
bio_region_range(clone, bio, &rs, &nr_regions);
/*
* A discard request might cover regions that have been already
* hydrated. There is no need to update the metadata for these
* regions.
*/
dm clone: Fix handling of partial region discards There is a bug in the way dm-clone handles discards, which can lead to discarding the wrong blocks or trying to discard blocks beyond the end of the device. This could lead to data corruption, if the destination device indeed discards the underlying blocks, i.e., if the discard operation results in the original contents of a block to be lost. The root of the problem is the code that calculates the range of regions covered by a discard request and decides which regions to discard. Since dm-clone handles the device in units of regions, we don't discard parts of a region, only whole regions. The range is calculated as: rs = dm_sector_div_up(bio->bi_iter.bi_sector, clone->region_size); re = bio_end_sector(bio) >> clone->region_shift; , where 'rs' is the first region to discard and (re - rs) is the number of regions to discard. The bug manifests when we try to discard part of a single region, i.e., when we try to discard a block with size < region_size, and the discard request both starts at an offset with respect to the beginning of that region and ends before the end of the region. The root cause is the following comparison: if (rs == re) // skip discard and complete original bio immediately , which doesn't take into account that 'rs' might be greater than 're'. Thus, we then issue a discard request for the wrong blocks, instead of skipping the discard all together. Fix the check to also take into account the above case, so we don't end up discarding the wrong blocks. Also, add some range checks to dm_clone_set_region_hydrated() and dm_clone_cond_set_range(), which update dm-clone's region bitmap. Note that the aforementioned bug doesn't cause invalid memory accesses, because dm_clone_is_range_hydrated() returns True for this case, so the checks are just precautionary. Fixes: 7431b7835f55 ("dm: add clone target") Cc: stable@vger.kernel.org # v5.4+ Signed-off-by: Nikos Tsironis <ntsironis@arrikto.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2020-03-27 14:01:08 +00:00
r = dm_clone_cond_set_range(clone->cmd, rs, nr_regions);
if (unlikely(r))
break;
}
out:
blk_start_plug(&plug);
while ((bio = bio_list_pop(&discards)))
complete_discard_bio(clone, bio, r == 0);
blk_finish_plug(&plug);
}
static void process_deferred_bios(struct clone *clone)
{
struct bio_list bios = BIO_EMPTY_LIST;
spin_lock_irq(&clone->lock);
bio_list_merge(&bios, &clone->deferred_bios);
bio_list_init(&clone->deferred_bios);
spin_unlock_irq(&clone->lock);
if (bio_list_empty(&bios))
return;
submit_bios(&bios);
}
static void process_deferred_flush_bios(struct clone *clone)
{
struct bio *bio;
dm clone: Flush destination device before committing metadata dm-clone maintains an on-disk bitmap which records which regions are valid in the destination device, i.e., which regions have already been hydrated, or have been written to directly, via user I/O. Setting a bit in the on-disk bitmap meas the corresponding region is valid in the destination device and we redirect all I/O regarding it to the destination device. Suppose the destination device has a volatile write-back cache and the following sequence of events occur: 1. A region gets hydrated, either through the background hydration or because it was written to directly, via user I/O. 2. The commit timeout expires and we commit the metadata, marking that region as valid in the destination device. 3. The system crashes and the destination device's cache has not been flushed, meaning the region's data are lost. The next time we read that region we read it from the destination device, since the metadata have been successfully committed, but the data are lost due to the crash, so we read garbage instead of the old data. This has several implications: 1. In case of background hydration or of writes with size smaller than the region size (which means we first copy the whole region and then issue the smaller write), we corrupt data that the user never touched. 2. In case of writes with size equal to the device's logical block size, we fail to provide atomic sector writes. When the system recovers the user will read garbage from the sector instead of the old data or the new data. 3. In case of writes without the FUA flag set, after the system recovers, the written sectors will contain garbage instead of a random mix of sectors containing either old data or new data, thus we fail again to provide atomic sector writes. 4. Even when the user flushes the dm-clone device, because we first commit the metadata and then pass down the flush, the same risk for corruption exists (if the system crashes after the metadata have been committed but before the flush is passed down). The only case which is unaffected is that of writes with size equal to the region size and with the FUA flag set. But, because FUA writes trigger metadata commits, this case can trigger the corruption indirectly. To solve this and avoid the potential data corruption we flush the destination device **before** committing the metadata. This ensures that any freshly hydrated regions, for which we commit the metadata, are properly written to non-volatile storage and won't be lost in case of a crash. Fixes: 7431b7835f55 ("dm: add clone target") Cc: stable@vger.kernel.org # v5.4+ Signed-off-by: Nikos Tsironis <ntsironis@arrikto.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2019-12-04 14:06:54 +00:00
bool dest_dev_flushed;
struct bio_list bios = BIO_EMPTY_LIST;
struct bio_list bio_completions = BIO_EMPTY_LIST;
/*
* If there are any deferred flush bios, we must commit the metadata
* before issuing them or signaling their completion.
*/
spin_lock_irq(&clone->lock);
bio_list_merge(&bios, &clone->deferred_flush_bios);
bio_list_init(&clone->deferred_flush_bios);
bio_list_merge(&bio_completions, &clone->deferred_flush_completions);
bio_list_init(&clone->deferred_flush_completions);
spin_unlock_irq(&clone->lock);
if (bio_list_empty(&bios) && bio_list_empty(&bio_completions) &&
!(dm_clone_changed_this_transaction(clone->cmd) && need_commit_due_to_time(clone)))
return;
dm clone: Flush destination device before committing metadata dm-clone maintains an on-disk bitmap which records which regions are valid in the destination device, i.e., which regions have already been hydrated, or have been written to directly, via user I/O. Setting a bit in the on-disk bitmap meas the corresponding region is valid in the destination device and we redirect all I/O regarding it to the destination device. Suppose the destination device has a volatile write-back cache and the following sequence of events occur: 1. A region gets hydrated, either through the background hydration or because it was written to directly, via user I/O. 2. The commit timeout expires and we commit the metadata, marking that region as valid in the destination device. 3. The system crashes and the destination device's cache has not been flushed, meaning the region's data are lost. The next time we read that region we read it from the destination device, since the metadata have been successfully committed, but the data are lost due to the crash, so we read garbage instead of the old data. This has several implications: 1. In case of background hydration or of writes with size smaller than the region size (which means we first copy the whole region and then issue the smaller write), we corrupt data that the user never touched. 2. In case of writes with size equal to the device's logical block size, we fail to provide atomic sector writes. When the system recovers the user will read garbage from the sector instead of the old data or the new data. 3. In case of writes without the FUA flag set, after the system recovers, the written sectors will contain garbage instead of a random mix of sectors containing either old data or new data, thus we fail again to provide atomic sector writes. 4. Even when the user flushes the dm-clone device, because we first commit the metadata and then pass down the flush, the same risk for corruption exists (if the system crashes after the metadata have been committed but before the flush is passed down). The only case which is unaffected is that of writes with size equal to the region size and with the FUA flag set. But, because FUA writes trigger metadata commits, this case can trigger the corruption indirectly. To solve this and avoid the potential data corruption we flush the destination device **before** committing the metadata. This ensures that any freshly hydrated regions, for which we commit the metadata, are properly written to non-volatile storage and won't be lost in case of a crash. Fixes: 7431b7835f55 ("dm: add clone target") Cc: stable@vger.kernel.org # v5.4+ Signed-off-by: Nikos Tsironis <ntsironis@arrikto.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2019-12-04 14:06:54 +00:00
if (commit_metadata(clone, &dest_dev_flushed)) {
bio_list_merge(&bios, &bio_completions);
while ((bio = bio_list_pop(&bios)))
bio_io_error(bio);
return;
}
clone->last_commit_jiffies = jiffies;
while ((bio = bio_list_pop(&bio_completions)))
bio_endio(bio);
dm clone: Flush destination device before committing metadata dm-clone maintains an on-disk bitmap which records which regions are valid in the destination device, i.e., which regions have already been hydrated, or have been written to directly, via user I/O. Setting a bit in the on-disk bitmap meas the corresponding region is valid in the destination device and we redirect all I/O regarding it to the destination device. Suppose the destination device has a volatile write-back cache and the following sequence of events occur: 1. A region gets hydrated, either through the background hydration or because it was written to directly, via user I/O. 2. The commit timeout expires and we commit the metadata, marking that region as valid in the destination device. 3. The system crashes and the destination device's cache has not been flushed, meaning the region's data are lost. The next time we read that region we read it from the destination device, since the metadata have been successfully committed, but the data are lost due to the crash, so we read garbage instead of the old data. This has several implications: 1. In case of background hydration or of writes with size smaller than the region size (which means we first copy the whole region and then issue the smaller write), we corrupt data that the user never touched. 2. In case of writes with size equal to the device's logical block size, we fail to provide atomic sector writes. When the system recovers the user will read garbage from the sector instead of the old data or the new data. 3. In case of writes without the FUA flag set, after the system recovers, the written sectors will contain garbage instead of a random mix of sectors containing either old data or new data, thus we fail again to provide atomic sector writes. 4. Even when the user flushes the dm-clone device, because we first commit the metadata and then pass down the flush, the same risk for corruption exists (if the system crashes after the metadata have been committed but before the flush is passed down). The only case which is unaffected is that of writes with size equal to the region size and with the FUA flag set. But, because FUA writes trigger metadata commits, this case can trigger the corruption indirectly. To solve this and avoid the potential data corruption we flush the destination device **before** committing the metadata. This ensures that any freshly hydrated regions, for which we commit the metadata, are properly written to non-volatile storage and won't be lost in case of a crash. Fixes: 7431b7835f55 ("dm: add clone target") Cc: stable@vger.kernel.org # v5.4+ Signed-off-by: Nikos Tsironis <ntsironis@arrikto.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2019-12-04 14:06:54 +00:00
while ((bio = bio_list_pop(&bios))) {
if ((bio->bi_opf & REQ_PREFLUSH) && dest_dev_flushed) {
/* We just flushed the destination device as part of
* the metadata commit, so there is no reason to send
* another flush.
*/
bio_endio(bio);
} else {
submit_bio_noacct(bio);
dm clone: Flush destination device before committing metadata dm-clone maintains an on-disk bitmap which records which regions are valid in the destination device, i.e., which regions have already been hydrated, or have been written to directly, via user I/O. Setting a bit in the on-disk bitmap meas the corresponding region is valid in the destination device and we redirect all I/O regarding it to the destination device. Suppose the destination device has a volatile write-back cache and the following sequence of events occur: 1. A region gets hydrated, either through the background hydration or because it was written to directly, via user I/O. 2. The commit timeout expires and we commit the metadata, marking that region as valid in the destination device. 3. The system crashes and the destination device's cache has not been flushed, meaning the region's data are lost. The next time we read that region we read it from the destination device, since the metadata have been successfully committed, but the data are lost due to the crash, so we read garbage instead of the old data. This has several implications: 1. In case of background hydration or of writes with size smaller than the region size (which means we first copy the whole region and then issue the smaller write), we corrupt data that the user never touched. 2. In case of writes with size equal to the device's logical block size, we fail to provide atomic sector writes. When the system recovers the user will read garbage from the sector instead of the old data or the new data. 3. In case of writes without the FUA flag set, after the system recovers, the written sectors will contain garbage instead of a random mix of sectors containing either old data or new data, thus we fail again to provide atomic sector writes. 4. Even when the user flushes the dm-clone device, because we first commit the metadata and then pass down the flush, the same risk for corruption exists (if the system crashes after the metadata have been committed but before the flush is passed down). The only case which is unaffected is that of writes with size equal to the region size and with the FUA flag set. But, because FUA writes trigger metadata commits, this case can trigger the corruption indirectly. To solve this and avoid the potential data corruption we flush the destination device **before** committing the metadata. This ensures that any freshly hydrated regions, for which we commit the metadata, are properly written to non-volatile storage and won't be lost in case of a crash. Fixes: 7431b7835f55 ("dm: add clone target") Cc: stable@vger.kernel.org # v5.4+ Signed-off-by: Nikos Tsironis <ntsironis@arrikto.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2019-12-04 14:06:54 +00:00
}
}
}
static void do_worker(struct work_struct *work)
{
struct clone *clone = container_of(work, typeof(*clone), worker);
process_deferred_bios(clone);
process_deferred_discards(clone);
/*
* process_deferred_flush_bios():
*
* - Commit metadata
*
* - Process deferred REQ_FUA completions
*
* - Process deferred REQ_PREFLUSH bios
*/
process_deferred_flush_bios(clone);
/* Background hydration */
do_hydration(clone);
}
/*
* Commit periodically so that not too much unwritten data builds up.
*
* Also, restart background hydration, if it has been stopped by in-flight I/O.
*/
static void do_waker(struct work_struct *work)
{
struct clone *clone = container_of(to_delayed_work(work), struct clone, waker);
wake_worker(clone);
queue_delayed_work(clone->wq, &clone->waker, COMMIT_PERIOD);
}
/*---------------------------------------------------------------------------*/
/*
* Target methods
*/
static int clone_map(struct dm_target *ti, struct bio *bio)
{
struct clone *clone = ti->private;
unsigned long region_nr;
atomic_inc(&clone->ios_in_flight);
if (unlikely(get_clone_mode(clone) == CM_FAIL))
return DM_MAPIO_KILL;
/*
* REQ_PREFLUSH bios carry no data:
*
* - Commit metadata, if changed
*
* - Pass down to destination device
*/
if (bio->bi_opf & REQ_PREFLUSH) {
remap_and_issue(clone, bio);
return DM_MAPIO_SUBMITTED;
}
bio->bi_iter.bi_sector = dm_target_offset(ti, bio->bi_iter.bi_sector);
/*
* dm-clone interprets discards and performs a fast hydration of the
* discarded regions, i.e., we skip the copy from the source device and
* just mark the regions as hydrated.
*/
if (bio_op(bio) == REQ_OP_DISCARD) {
process_discard_bio(clone, bio);
return DM_MAPIO_SUBMITTED;
}
/*
* If the bio's region is hydrated, redirect it to the destination
* device.
*
* If the region is not hydrated and the bio is a READ, redirect it to
* the source device.
*
* Else, defer WRITE bio until after its region has been hydrated and
* start the region's hydration immediately.
*/
region_nr = bio_to_region(clone, bio);
if (dm_clone_is_region_hydrated(clone->cmd, region_nr)) {
remap_and_issue(clone, bio);
return DM_MAPIO_SUBMITTED;
} else if (bio_data_dir(bio) == READ) {
remap_to_source(clone, bio);
return DM_MAPIO_REMAPPED;
}
remap_to_dest(clone, bio);
hydrate_bio_region(clone, bio);
return DM_MAPIO_SUBMITTED;
}
static int clone_endio(struct dm_target *ti, struct bio *bio, blk_status_t *error)
{
struct clone *clone = ti->private;
atomic_dec(&clone->ios_in_flight);
return DM_ENDIO_DONE;
}
static void emit_flags(struct clone *clone, char *result, unsigned int maxlen,
ssize_t *sz_ptr)
{
ssize_t sz = *sz_ptr;
unsigned int count;
count = !test_bit(DM_CLONE_HYDRATION_ENABLED, &clone->flags);
count += !test_bit(DM_CLONE_DISCARD_PASSDOWN, &clone->flags);
DMEMIT("%u ", count);
if (!test_bit(DM_CLONE_HYDRATION_ENABLED, &clone->flags))
DMEMIT("no_hydration ");
if (!test_bit(DM_CLONE_DISCARD_PASSDOWN, &clone->flags))
DMEMIT("no_discard_passdown ");
*sz_ptr = sz;
}
static void emit_core_args(struct clone *clone, char *result,
unsigned int maxlen, ssize_t *sz_ptr)
{
ssize_t sz = *sz_ptr;
unsigned int count = 4;
DMEMIT("%u hydration_threshold %u hydration_batch_size %u ", count,
READ_ONCE(clone->hydration_threshold),
READ_ONCE(clone->hydration_batch_size));
*sz_ptr = sz;
}
/*
* Status format:
*
* <metadata block size> <#used metadata blocks>/<#total metadata blocks>
* <clone region size> <#hydrated regions>/<#total regions> <#hydrating regions>
* <#features> <features>* <#core args> <core args>* <clone metadata mode>
*/
static void clone_status(struct dm_target *ti, status_type_t type,
unsigned int status_flags, char *result,
unsigned int maxlen)
{
int r;
unsigned int i;
ssize_t sz = 0;
dm_block_t nr_free_metadata_blocks = 0;
dm_block_t nr_metadata_blocks = 0;
char buf[BDEVNAME_SIZE];
struct clone *clone = ti->private;
switch (type) {
case STATUSTYPE_INFO:
if (get_clone_mode(clone) == CM_FAIL) {
DMEMIT("Fail");
break;
}
/* Commit to ensure statistics aren't out-of-date */
if (!(status_flags & DM_STATUS_NOFLUSH_FLAG) && !dm_suspended(ti))
dm clone: Flush destination device before committing metadata dm-clone maintains an on-disk bitmap which records which regions are valid in the destination device, i.e., which regions have already been hydrated, or have been written to directly, via user I/O. Setting a bit in the on-disk bitmap meas the corresponding region is valid in the destination device and we redirect all I/O regarding it to the destination device. Suppose the destination device has a volatile write-back cache and the following sequence of events occur: 1. A region gets hydrated, either through the background hydration or because it was written to directly, via user I/O. 2. The commit timeout expires and we commit the metadata, marking that region as valid in the destination device. 3. The system crashes and the destination device's cache has not been flushed, meaning the region's data are lost. The next time we read that region we read it from the destination device, since the metadata have been successfully committed, but the data are lost due to the crash, so we read garbage instead of the old data. This has several implications: 1. In case of background hydration or of writes with size smaller than the region size (which means we first copy the whole region and then issue the smaller write), we corrupt data that the user never touched. 2. In case of writes with size equal to the device's logical block size, we fail to provide atomic sector writes. When the system recovers the user will read garbage from the sector instead of the old data or the new data. 3. In case of writes without the FUA flag set, after the system recovers, the written sectors will contain garbage instead of a random mix of sectors containing either old data or new data, thus we fail again to provide atomic sector writes. 4. Even when the user flushes the dm-clone device, because we first commit the metadata and then pass down the flush, the same risk for corruption exists (if the system crashes after the metadata have been committed but before the flush is passed down). The only case which is unaffected is that of writes with size equal to the region size and with the FUA flag set. But, because FUA writes trigger metadata commits, this case can trigger the corruption indirectly. To solve this and avoid the potential data corruption we flush the destination device **before** committing the metadata. This ensures that any freshly hydrated regions, for which we commit the metadata, are properly written to non-volatile storage and won't be lost in case of a crash. Fixes: 7431b7835f55 ("dm: add clone target") Cc: stable@vger.kernel.org # v5.4+ Signed-off-by: Nikos Tsironis <ntsironis@arrikto.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2019-12-04 14:06:54 +00:00
(void) commit_metadata(clone, NULL);
r = dm_clone_get_free_metadata_block_count(clone->cmd, &nr_free_metadata_blocks);
if (r) {
DMERR("%s: dm_clone_get_free_metadata_block_count returned %d",
clone_device_name(clone), r);
goto error;
}
r = dm_clone_get_metadata_dev_size(clone->cmd, &nr_metadata_blocks);
if (r) {
DMERR("%s: dm_clone_get_metadata_dev_size returned %d",
clone_device_name(clone), r);
goto error;
}
DMEMIT("%u %llu/%llu %llu %u/%lu %u ",
DM_CLONE_METADATA_BLOCK_SIZE,
(unsigned long long)(nr_metadata_blocks - nr_free_metadata_blocks),
(unsigned long long)nr_metadata_blocks,
(unsigned long long)clone->region_size,
dm_clone_nr_of_hydrated_regions(clone->cmd),
clone->nr_regions,
atomic_read(&clone->hydrations_in_flight));
emit_flags(clone, result, maxlen, &sz);
emit_core_args(clone, result, maxlen, &sz);
switch (get_clone_mode(clone)) {
case CM_WRITE:
DMEMIT("rw");
break;
case CM_READ_ONLY:
DMEMIT("ro");
break;
case CM_FAIL:
DMEMIT("Fail");
}
break;
case STATUSTYPE_TABLE:
format_dev_t(buf, clone->metadata_dev->bdev->bd_dev);
DMEMIT("%s ", buf);
format_dev_t(buf, clone->dest_dev->bdev->bd_dev);
DMEMIT("%s ", buf);
format_dev_t(buf, clone->source_dev->bdev->bd_dev);
DMEMIT("%s", buf);
for (i = 0; i < clone->nr_ctr_args; i++)
DMEMIT(" %s", clone->ctr_args[i]);
2021-07-13 00:49:03 +00:00
break;
case STATUSTYPE_IMA:
*result = '\0';
break;
}
return;
error:
DMEMIT("Error");
}
static sector_t get_dev_size(struct dm_dev *dev)
{
return bdev_nr_sectors(dev->bdev);
}
/*---------------------------------------------------------------------------*/
/*
* Construct a clone device mapping:
*
* clone <metadata dev> <destination dev> <source dev> <region size>
* [<#feature args> [<feature arg>]* [<#core args> [key value]*]]
*
* metadata dev: Fast device holding the persistent metadata
* destination dev: The destination device, which will become a clone of the
* source device
* source dev: The read-only source device that gets cloned
* region size: dm-clone unit size in sectors
*
* #feature args: Number of feature arguments passed
* feature args: E.g. no_hydration, no_discard_passdown
*
* #core arguments: An even number of core arguments
* core arguments: Key/value pairs for tuning the core
* E.g. 'hydration_threshold 256'
*/
static int parse_feature_args(struct dm_arg_set *as, struct clone *clone)
{
int r;
unsigned int argc;
const char *arg_name;
struct dm_target *ti = clone->ti;
const struct dm_arg args = {
.min = 0,
.max = 2,
.error = "Invalid number of feature arguments"
};
/* No feature arguments supplied */
if (!as->argc)
return 0;
r = dm_read_arg_group(&args, as, &argc, &ti->error);
if (r)
return r;
while (argc) {
arg_name = dm_shift_arg(as);
argc--;
if (!strcasecmp(arg_name, "no_hydration")) {
__clear_bit(DM_CLONE_HYDRATION_ENABLED, &clone->flags);
} else if (!strcasecmp(arg_name, "no_discard_passdown")) {
__clear_bit(DM_CLONE_DISCARD_PASSDOWN, &clone->flags);
} else {
ti->error = "Invalid feature argument";
return -EINVAL;
}
}
return 0;
}
static int parse_core_args(struct dm_arg_set *as, struct clone *clone)
{
int r;
unsigned int argc;
unsigned int value;
const char *arg_name;
struct dm_target *ti = clone->ti;
const struct dm_arg args = {
.min = 0,
.max = 4,
.error = "Invalid number of core arguments"
};
/* Initialize core arguments */
clone->hydration_batch_size = DEFAULT_HYDRATION_BATCH_SIZE;
clone->hydration_threshold = DEFAULT_HYDRATION_THRESHOLD;
/* No core arguments supplied */
if (!as->argc)
return 0;
r = dm_read_arg_group(&args, as, &argc, &ti->error);
if (r)
return r;
if (argc & 1) {
ti->error = "Number of core arguments must be even";
return -EINVAL;
}
while (argc) {
arg_name = dm_shift_arg(as);
argc -= 2;
if (!strcasecmp(arg_name, "hydration_threshold")) {
if (kstrtouint(dm_shift_arg(as), 10, &value)) {
ti->error = "Invalid value for argument `hydration_threshold'";
return -EINVAL;
}
clone->hydration_threshold = value;
} else if (!strcasecmp(arg_name, "hydration_batch_size")) {
if (kstrtouint(dm_shift_arg(as), 10, &value)) {
ti->error = "Invalid value for argument `hydration_batch_size'";
return -EINVAL;
}
clone->hydration_batch_size = value;
} else {
ti->error = "Invalid core argument";
return -EINVAL;
}
}
return 0;
}
static int parse_region_size(struct clone *clone, struct dm_arg_set *as, char **error)
{
int r;
unsigned int region_size;
struct dm_arg arg;
arg.min = MIN_REGION_SIZE;
arg.max = MAX_REGION_SIZE;
arg.error = "Invalid region size";
r = dm_read_arg(&arg, as, &region_size, error);
if (r)
return r;
/* Check region size is a power of 2 */
if (!is_power_of_2(region_size)) {
*error = "Region size is not a power of 2";
return -EINVAL;
}
/* Validate the region size against the device logical block size */
if (region_size % (bdev_logical_block_size(clone->source_dev->bdev) >> 9) ||
region_size % (bdev_logical_block_size(clone->dest_dev->bdev) >> 9)) {
*error = "Region size is not a multiple of device logical block size";
return -EINVAL;
}
clone->region_size = region_size;
return 0;
}
static int validate_nr_regions(unsigned long n, char **error)
{
/*
* dm_bitset restricts us to 2^32 regions. test_bit & co. restrict us
* further to 2^31 regions.
*/
if (n > (1UL << 31)) {
*error = "Too many regions. Consider increasing the region size";
return -EINVAL;
}
return 0;
}
static int parse_metadata_dev(struct clone *clone, struct dm_arg_set *as, char **error)
{
int r;
sector_t metadata_dev_size;
r = dm_get_device(clone->ti, dm_shift_arg(as), FMODE_READ | FMODE_WRITE,
&clone->metadata_dev);
if (r) {
*error = "Error opening metadata device";
return r;
}
metadata_dev_size = get_dev_size(clone->metadata_dev);
if (metadata_dev_size > DM_CLONE_METADATA_MAX_SECTORS_WARNING)
DMWARN("Metadata device %pg is larger than %u sectors: excess space will not be used.",
clone->metadata_dev->bdev, DM_CLONE_METADATA_MAX_SECTORS);
return 0;
}
static int parse_dest_dev(struct clone *clone, struct dm_arg_set *as, char **error)
{
int r;
sector_t dest_dev_size;
r = dm_get_device(clone->ti, dm_shift_arg(as), FMODE_READ | FMODE_WRITE,
&clone->dest_dev);
if (r) {
*error = "Error opening destination device";
return r;
}
dest_dev_size = get_dev_size(clone->dest_dev);
if (dest_dev_size < clone->ti->len) {
dm_put_device(clone->ti, clone->dest_dev);
*error = "Device size larger than destination device";
return -EINVAL;
}
return 0;
}
static int parse_source_dev(struct clone *clone, struct dm_arg_set *as, char **error)
{
int r;
sector_t source_dev_size;
r = dm_get_device(clone->ti, dm_shift_arg(as), FMODE_READ,
&clone->source_dev);
if (r) {
*error = "Error opening source device";
return r;
}
source_dev_size = get_dev_size(clone->source_dev);
if (source_dev_size < clone->ti->len) {
dm_put_device(clone->ti, clone->source_dev);
*error = "Device size larger than source device";
return -EINVAL;
}
return 0;
}
static int copy_ctr_args(struct clone *clone, int argc, const char **argv, char **error)
{
unsigned int i;
const char **copy;
copy = kcalloc(argc, sizeof(*copy), GFP_KERNEL);
if (!copy)
goto error;
for (i = 0; i < argc; i++) {
copy[i] = kstrdup(argv[i], GFP_KERNEL);
if (!copy[i]) {
while (i--)
kfree(copy[i]);
kfree(copy);
goto error;
}
}
clone->nr_ctr_args = argc;
clone->ctr_args = copy;
return 0;
error:
*error = "Failed to allocate memory for table line";
return -ENOMEM;
}
static int clone_ctr(struct dm_target *ti, unsigned int argc, char **argv)
{
int r;
sector_t nr_regions;
struct clone *clone;
struct dm_arg_set as;
if (argc < 4) {
ti->error = "Invalid number of arguments";
return -EINVAL;
}
as.argc = argc;
as.argv = argv;
clone = kzalloc(sizeof(*clone), GFP_KERNEL);
if (!clone) {
ti->error = "Failed to allocate clone structure";
return -ENOMEM;
}
clone->ti = ti;
/* Initialize dm-clone flags */
__set_bit(DM_CLONE_HYDRATION_ENABLED, &clone->flags);
__set_bit(DM_CLONE_HYDRATION_SUSPENDED, &clone->flags);
__set_bit(DM_CLONE_DISCARD_PASSDOWN, &clone->flags);
r = parse_metadata_dev(clone, &as, &ti->error);
if (r)
goto out_with_clone;
r = parse_dest_dev(clone, &as, &ti->error);
if (r)
goto out_with_meta_dev;
r = parse_source_dev(clone, &as, &ti->error);
if (r)
goto out_with_dest_dev;
r = parse_region_size(clone, &as, &ti->error);
if (r)
goto out_with_source_dev;
clone->region_shift = __ffs(clone->region_size);
nr_regions = dm_sector_div_up(ti->len, clone->region_size);
/* Check for overflow */
if (nr_regions != (unsigned long)nr_regions) {
ti->error = "Too many regions. Consider increasing the region size";
r = -EOVERFLOW;
goto out_with_source_dev;
}
clone->nr_regions = nr_regions;
r = validate_nr_regions(clone->nr_regions, &ti->error);
if (r)
goto out_with_source_dev;
r = dm_set_target_max_io_len(ti, clone->region_size);
if (r) {
ti->error = "Failed to set max io len";
goto out_with_source_dev;
}
r = parse_feature_args(&as, clone);
if (r)
goto out_with_source_dev;
r = parse_core_args(&as, clone);
if (r)
goto out_with_source_dev;
/* Load metadata */
clone->cmd = dm_clone_metadata_open(clone->metadata_dev->bdev, ti->len,
clone->region_size);
if (IS_ERR(clone->cmd)) {
ti->error = "Failed to load metadata";
r = PTR_ERR(clone->cmd);
goto out_with_source_dev;
}
__set_clone_mode(clone, CM_WRITE);
if (get_clone_mode(clone) != CM_WRITE) {
ti->error = "Unable to get write access to metadata, please check/repair metadata";
r = -EPERM;
goto out_with_metadata;
}
clone->last_commit_jiffies = jiffies;
/* Allocate hydration hash table */
r = hash_table_init(clone);
if (r) {
ti->error = "Failed to allocate hydration hash table";
goto out_with_metadata;
}
atomic_set(&clone->ios_in_flight, 0);
init_waitqueue_head(&clone->hydration_stopped);
spin_lock_init(&clone->lock);
bio_list_init(&clone->deferred_bios);
bio_list_init(&clone->deferred_discard_bios);
bio_list_init(&clone->deferred_flush_bios);
bio_list_init(&clone->deferred_flush_completions);
clone->hydration_offset = 0;
atomic_set(&clone->hydrations_in_flight, 0);
clone->wq = alloc_workqueue("dm-" DM_MSG_PREFIX, WQ_MEM_RECLAIM, 0);
if (!clone->wq) {
ti->error = "Failed to allocate workqueue";
r = -ENOMEM;
goto out_with_ht;
}
INIT_WORK(&clone->worker, do_worker);
INIT_DELAYED_WORK(&clone->waker, do_waker);
clone->kcopyd_client = dm_kcopyd_client_create(&dm_kcopyd_throttle);
if (IS_ERR(clone->kcopyd_client)) {
r = PTR_ERR(clone->kcopyd_client);
goto out_with_wq;
}
r = mempool_init_slab_pool(&clone->hydration_pool, MIN_HYDRATIONS,
_hydration_cache);
if (r) {
ti->error = "Failed to create dm_clone_region_hydration memory pool";
goto out_with_kcopyd;
}
/* Save a copy of the table line */
r = copy_ctr_args(clone, argc - 3, (const char **)argv + 3, &ti->error);
if (r)
goto out_with_mempool;
mutex_init(&clone->commit_lock);
/* Enable flushes */
ti->num_flush_bios = 1;
ti->flush_supported = true;
/* Enable discards */
ti->discards_supported = true;
ti->num_discard_bios = 1;
ti->private = clone;
return 0;
out_with_mempool:
mempool_exit(&clone->hydration_pool);
out_with_kcopyd:
dm_kcopyd_client_destroy(clone->kcopyd_client);
out_with_wq:
destroy_workqueue(clone->wq);
out_with_ht:
hash_table_exit(clone);
out_with_metadata:
dm_clone_metadata_close(clone->cmd);
out_with_source_dev:
dm_put_device(ti, clone->source_dev);
out_with_dest_dev:
dm_put_device(ti, clone->dest_dev);
out_with_meta_dev:
dm_put_device(ti, clone->metadata_dev);
out_with_clone:
kfree(clone);
return r;
}
static void clone_dtr(struct dm_target *ti)
{
unsigned int i;
struct clone *clone = ti->private;
mutex_destroy(&clone->commit_lock);
for (i = 0; i < clone->nr_ctr_args; i++)
kfree(clone->ctr_args[i]);
kfree(clone->ctr_args);
mempool_exit(&clone->hydration_pool);
dm_kcopyd_client_destroy(clone->kcopyd_client);
cancel_delayed_work_sync(&clone->waker);
destroy_workqueue(clone->wq);
hash_table_exit(clone);
dm_clone_metadata_close(clone->cmd);
dm_put_device(ti, clone->source_dev);
dm_put_device(ti, clone->dest_dev);
dm_put_device(ti, clone->metadata_dev);
kfree(clone);
}
/*---------------------------------------------------------------------------*/
static void clone_postsuspend(struct dm_target *ti)
{
struct clone *clone = ti->private;
/*
* To successfully suspend the device:
*
* - We cancel the delayed work for periodic commits and wait for
* it to finish.
*
* - We stop the background hydration, i.e. we prevent new region
* hydrations from starting.
*
* - We wait for any in-flight hydrations to finish.
*
* - We flush the workqueue.
*
* - We commit the metadata.
*/
cancel_delayed_work_sync(&clone->waker);
set_bit(DM_CLONE_HYDRATION_SUSPENDED, &clone->flags);
/*
* Make sure set_bit() is ordered before atomic_read(), otherwise we
* might race with do_hydration() and miss some started region
* hydrations.
*
* This is paired with smp_mb__after_atomic() in do_hydration().
*/
smp_mb__after_atomic();
wait_event(clone->hydration_stopped, !atomic_read(&clone->hydrations_in_flight));
flush_workqueue(clone->wq);
dm clone: Flush destination device before committing metadata dm-clone maintains an on-disk bitmap which records which regions are valid in the destination device, i.e., which regions have already been hydrated, or have been written to directly, via user I/O. Setting a bit in the on-disk bitmap meas the corresponding region is valid in the destination device and we redirect all I/O regarding it to the destination device. Suppose the destination device has a volatile write-back cache and the following sequence of events occur: 1. A region gets hydrated, either through the background hydration or because it was written to directly, via user I/O. 2. The commit timeout expires and we commit the metadata, marking that region as valid in the destination device. 3. The system crashes and the destination device's cache has not been flushed, meaning the region's data are lost. The next time we read that region we read it from the destination device, since the metadata have been successfully committed, but the data are lost due to the crash, so we read garbage instead of the old data. This has several implications: 1. In case of background hydration or of writes with size smaller than the region size (which means we first copy the whole region and then issue the smaller write), we corrupt data that the user never touched. 2. In case of writes with size equal to the device's logical block size, we fail to provide atomic sector writes. When the system recovers the user will read garbage from the sector instead of the old data or the new data. 3. In case of writes without the FUA flag set, after the system recovers, the written sectors will contain garbage instead of a random mix of sectors containing either old data or new data, thus we fail again to provide atomic sector writes. 4. Even when the user flushes the dm-clone device, because we first commit the metadata and then pass down the flush, the same risk for corruption exists (if the system crashes after the metadata have been committed but before the flush is passed down). The only case which is unaffected is that of writes with size equal to the region size and with the FUA flag set. But, because FUA writes trigger metadata commits, this case can trigger the corruption indirectly. To solve this and avoid the potential data corruption we flush the destination device **before** committing the metadata. This ensures that any freshly hydrated regions, for which we commit the metadata, are properly written to non-volatile storage and won't be lost in case of a crash. Fixes: 7431b7835f55 ("dm: add clone target") Cc: stable@vger.kernel.org # v5.4+ Signed-off-by: Nikos Tsironis <ntsironis@arrikto.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2019-12-04 14:06:54 +00:00
(void) commit_metadata(clone, NULL);
}
static void clone_resume(struct dm_target *ti)
{
struct clone *clone = ti->private;
clear_bit(DM_CLONE_HYDRATION_SUSPENDED, &clone->flags);
do_waker(&clone->waker.work);
}
/*
* If discard_passdown was enabled verify that the destination device supports
* discards. Disable discard_passdown if not.
*/
static void disable_passdown_if_not_supported(struct clone *clone)
{
struct block_device *dest_dev = clone->dest_dev->bdev;
struct queue_limits *dest_limits = &bdev_get_queue(dest_dev)->limits;
const char *reason = NULL;
if (!test_bit(DM_CLONE_DISCARD_PASSDOWN, &clone->flags))
return;
if (!bdev_max_discard_sectors(dest_dev))
reason = "discard unsupported";
else if (dest_limits->max_discard_sectors < clone->region_size)
reason = "max discard sectors smaller than a region";
if (reason) {
DMWARN("Destination device (%pg) %s: Disabling discard passdown.",
dest_dev, reason);
clear_bit(DM_CLONE_DISCARD_PASSDOWN, &clone->flags);
}
}
static void set_discard_limits(struct clone *clone, struct queue_limits *limits)
{
struct block_device *dest_bdev = clone->dest_dev->bdev;
struct queue_limits *dest_limits = &bdev_get_queue(dest_bdev)->limits;
if (!test_bit(DM_CLONE_DISCARD_PASSDOWN, &clone->flags)) {
/* No passdown is done so we set our own virtual limits */
limits->discard_granularity = clone->region_size << SECTOR_SHIFT;
limits->max_discard_sectors = round_down(UINT_MAX >> SECTOR_SHIFT, clone->region_size);
return;
}
/*
* clone_iterate_devices() is stacking both the source and destination
* device limits but discards aren't passed to the source device, so
* inherit destination's limits.
*/
limits->max_discard_sectors = dest_limits->max_discard_sectors;
limits->max_hw_discard_sectors = dest_limits->max_hw_discard_sectors;
limits->discard_granularity = dest_limits->discard_granularity;
limits->discard_alignment = dest_limits->discard_alignment;
limits->discard_misaligned = dest_limits->discard_misaligned;
limits->max_discard_segments = dest_limits->max_discard_segments;
}
static void clone_io_hints(struct dm_target *ti, struct queue_limits *limits)
{
struct clone *clone = ti->private;
u64 io_opt_sectors = limits->io_opt >> SECTOR_SHIFT;
/*
* If the system-determined stacked limits are compatible with
* dm-clone's region size (io_opt is a factor) do not override them.
*/
if (io_opt_sectors < clone->region_size ||
do_div(io_opt_sectors, clone->region_size)) {
blk_limits_io_min(limits, clone->region_size << SECTOR_SHIFT);
blk_limits_io_opt(limits, clone->region_size << SECTOR_SHIFT);
}
disable_passdown_if_not_supported(clone);
set_discard_limits(clone, limits);
}
static int clone_iterate_devices(struct dm_target *ti,
iterate_devices_callout_fn fn, void *data)
{
int ret;
struct clone *clone = ti->private;
struct dm_dev *dest_dev = clone->dest_dev;
struct dm_dev *source_dev = clone->source_dev;
ret = fn(ti, source_dev, 0, ti->len, data);
if (!ret)
ret = fn(ti, dest_dev, 0, ti->len, data);
return ret;
}
/*
* dm-clone message functions.
*/
static void set_hydration_threshold(struct clone *clone, unsigned int nr_regions)
{
WRITE_ONCE(clone->hydration_threshold, nr_regions);
/*
* If user space sets hydration_threshold to zero then the hydration
* will stop. If at a later time the hydration_threshold is increased
* we must restart the hydration process by waking up the worker.
*/
wake_worker(clone);
}
static void set_hydration_batch_size(struct clone *clone, unsigned int nr_regions)
{
WRITE_ONCE(clone->hydration_batch_size, nr_regions);
}
static void enable_hydration(struct clone *clone)
{
if (!test_and_set_bit(DM_CLONE_HYDRATION_ENABLED, &clone->flags))
wake_worker(clone);
}
static void disable_hydration(struct clone *clone)
{
clear_bit(DM_CLONE_HYDRATION_ENABLED, &clone->flags);
}
static int clone_message(struct dm_target *ti, unsigned int argc, char **argv,
char *result, unsigned int maxlen)
{
struct clone *clone = ti->private;
unsigned int value;
if (!argc)
return -EINVAL;
if (!strcasecmp(argv[0], "enable_hydration")) {
enable_hydration(clone);
return 0;
}
if (!strcasecmp(argv[0], "disable_hydration")) {
disable_hydration(clone);
return 0;
}
if (argc != 2)
return -EINVAL;
if (!strcasecmp(argv[0], "hydration_threshold")) {
if (kstrtouint(argv[1], 10, &value))
return -EINVAL;
set_hydration_threshold(clone, value);
return 0;
}
if (!strcasecmp(argv[0], "hydration_batch_size")) {
if (kstrtouint(argv[1], 10, &value))
return -EINVAL;
set_hydration_batch_size(clone, value);
return 0;
}
DMERR("%s: Unsupported message `%s'", clone_device_name(clone), argv[0]);
return -EINVAL;
}
static struct target_type clone_target = {
.name = "clone",
.version = {1, 0, 0},
.module = THIS_MODULE,
.ctr = clone_ctr,
.dtr = clone_dtr,
.map = clone_map,
.end_io = clone_endio,
.postsuspend = clone_postsuspend,
.resume = clone_resume,
.status = clone_status,
.message = clone_message,
.io_hints = clone_io_hints,
.iterate_devices = clone_iterate_devices,
};
/*---------------------------------------------------------------------------*/
/* Module functions */
static int __init dm_clone_init(void)
{
int r;
_hydration_cache = KMEM_CACHE(dm_clone_region_hydration, 0);
if (!_hydration_cache)
return -ENOMEM;
r = dm_register_target(&clone_target);
if (r < 0) {
kmem_cache_destroy(_hydration_cache);
return r;
}
return 0;
}
static void __exit dm_clone_exit(void)
{
dm_unregister_target(&clone_target);
kmem_cache_destroy(_hydration_cache);
_hydration_cache = NULL;
}
/* Module hooks */
module_init(dm_clone_init);
module_exit(dm_clone_exit);
MODULE_DESCRIPTION(DM_NAME " clone target");
MODULE_AUTHOR("Nikos Tsironis <ntsironis@arrikto.com>");
MODULE_LICENSE("GPL");