linux/drivers/media/usb/siano/smsusb.c

737 lines
20 KiB
C
Raw Normal View History

/****************************************************************
Siano Mobile Silicon, Inc.
MDTV receiver kernel modules.
Copyright (C) 2005-2009, Uri Shkolnik, Anatoly Greenblat
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
****************************************************************/
#include "smscoreapi.h"
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/usb.h>
#include <linux/firmware.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 08:04:11 +00:00
#include <linux/slab.h>
#include <linux/module.h>
#include <media/media-device.h>
#include "sms-cards.h"
#include "smsendian.h"
#define USB1_BUFFER_SIZE 0x1000
#define USB2_BUFFER_SIZE 0x2000
#define MAX_BUFFERS 50
#define MAX_URBS 10
struct smsusb_device_t;
enum smsusb_state {
SMSUSB_DISCONNECTED,
SMSUSB_SUSPENDED,
SMSUSB_ACTIVE
};
struct smsusb_urb_t {
struct list_head entry;
struct smscore_buffer_t *cb;
struct smsusb_device_t *dev;
struct urb urb;
[media] smsusb: don't sleep while atomic smscore_getbuffer() calls internally wait_event(), with can sleep. As smsusb_onresponse() is called on interrupt context, this causes the following warning: BUG: sleeping function called from invalid context at drivers/media/common/siano/smscoreapi.c:1653 in_atomic(): 1, irqs_disabled(): 1, pid: 11084, name: systemd-udevd INFO: lockdep is turned off. irq event stamp: 0 hardirqs last enabled at (0): [< (null)>] (null) hardirqs last disabled at (0): [<ffffffff811480f7>] copy_process.part.7+0x10e7/0x56d0 softirqs last enabled at (0): [<ffffffff81148193>] copy_process.part.7+0x1183/0x56d0 softirqs last disabled at (0): [< (null)>] (null) CPU: 2 PID: 11084 Comm: systemd-udevd Tainted: G B W 4.5.0-rc3+ #47 Hardware name: /NUC5i7RYB, BIOS RYBDWi35.86A.0350.2015.0812.1722 08/12/2015 0000000000000000 ffff8803c6907a80 ffffffff81933901 ffff8802bd916000 ffff8802bd9165c8 ffff8803c6907aa8 ffffffff811c6af5 ffff8802bd916000 ffffffffa0ce9b60 0000000000000675 ffff8803c6907ae8 ffffffff811c6ce5 Call Trace: <IRQ> [<ffffffff81933901>] dump_stack+0x85/0xc4 [<ffffffff811c6af5>] ___might_sleep+0x245/0x3a0 [<ffffffff811c6ce5>] __might_sleep+0x95/0x1a0 [<ffffffffa0ce020a>] ? list_add_locked+0xca/0x140 [smsmdtv] [<ffffffffa0ce3b8d>] smscore_getbuffer+0x7d/0x120 [smsmdtv] [<ffffffff8123819d>] ? trace_hardirqs_off+0xd/0x10 [<ffffffffa0ce3b10>] ? smscore_sendrequest_and_wait.isra.5+0x120/0x120 [smsmdtv] [<ffffffffa0ce020a>] ? list_add_locked+0xca/0x140 [smsmdtv] [<ffffffffa0ce13ca>] ? smscore_putbuffer+0x3a/0x40 [smsmdtv] [<ffffffffa0d107bc>] smsusb_submit_urb+0x2ec/0x4f0 [smsusb] [<ffffffffa0d10e36>] smsusb_onresponse+0x476/0x720 [smsusb] Let's add a work queue to handle the bottom half, preventing this problem. Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-02-16 09:22:27 +00:00
/* For the bottom half */
struct work_struct wq;
};
struct smsusb_device_t {
struct usb_device *udev;
struct smscore_device_t *coredev;
struct smsusb_urb_t surbs[MAX_URBS];
int response_alignment;
int buffer_size;
unsigned char in_ep;
unsigned char out_ep;
enum smsusb_state state;
};
static int smsusb_submit_urb(struct smsusb_device_t *dev,
struct smsusb_urb_t *surb);
[media] smsusb: don't sleep while atomic smscore_getbuffer() calls internally wait_event(), with can sleep. As smsusb_onresponse() is called on interrupt context, this causes the following warning: BUG: sleeping function called from invalid context at drivers/media/common/siano/smscoreapi.c:1653 in_atomic(): 1, irqs_disabled(): 1, pid: 11084, name: systemd-udevd INFO: lockdep is turned off. irq event stamp: 0 hardirqs last enabled at (0): [< (null)>] (null) hardirqs last disabled at (0): [<ffffffff811480f7>] copy_process.part.7+0x10e7/0x56d0 softirqs last enabled at (0): [<ffffffff81148193>] copy_process.part.7+0x1183/0x56d0 softirqs last disabled at (0): [< (null)>] (null) CPU: 2 PID: 11084 Comm: systemd-udevd Tainted: G B W 4.5.0-rc3+ #47 Hardware name: /NUC5i7RYB, BIOS RYBDWi35.86A.0350.2015.0812.1722 08/12/2015 0000000000000000 ffff8803c6907a80 ffffffff81933901 ffff8802bd916000 ffff8802bd9165c8 ffff8803c6907aa8 ffffffff811c6af5 ffff8802bd916000 ffffffffa0ce9b60 0000000000000675 ffff8803c6907ae8 ffffffff811c6ce5 Call Trace: <IRQ> [<ffffffff81933901>] dump_stack+0x85/0xc4 [<ffffffff811c6af5>] ___might_sleep+0x245/0x3a0 [<ffffffff811c6ce5>] __might_sleep+0x95/0x1a0 [<ffffffffa0ce020a>] ? list_add_locked+0xca/0x140 [smsmdtv] [<ffffffffa0ce3b8d>] smscore_getbuffer+0x7d/0x120 [smsmdtv] [<ffffffff8123819d>] ? trace_hardirqs_off+0xd/0x10 [<ffffffffa0ce3b10>] ? smscore_sendrequest_and_wait.isra.5+0x120/0x120 [smsmdtv] [<ffffffffa0ce020a>] ? list_add_locked+0xca/0x140 [smsmdtv] [<ffffffffa0ce13ca>] ? smscore_putbuffer+0x3a/0x40 [smsmdtv] [<ffffffffa0d107bc>] smsusb_submit_urb+0x2ec/0x4f0 [smsusb] [<ffffffffa0d10e36>] smsusb_onresponse+0x476/0x720 [smsusb] Let's add a work queue to handle the bottom half, preventing this problem. Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-02-16 09:22:27 +00:00
/**
* Completing URB's callback handler - bottom half (proccess context)
* submits the URB prepared on smsusb_onresponse()
*/
static void do_submit_urb(struct work_struct *work)
{
struct smsusb_urb_t *surb = container_of(work, struct smsusb_urb_t, wq);
struct smsusb_device_t *dev = surb->dev;
smsusb_submit_urb(dev, surb);
}
/**
* Completing URB's callback handler - top half (interrupt context)
* adds completing sms urb to the global surbs list and activtes the worker
* thread the surb
* IMPORTANT - blocking functions must not be called from here !!!
* @param urb pointer to a completing urb object
*/
static void smsusb_onresponse(struct urb *urb)
{
struct smsusb_urb_t *surb = (struct smsusb_urb_t *) urb->context;
struct smsusb_device_t *dev = surb->dev;
if (urb->status == -ESHUTDOWN) {
pr_err("error, urb status %d (-ESHUTDOWN), %d bytes\n",
urb->status, urb->actual_length);
return;
}
if ((urb->actual_length > 0) && (urb->status == 0)) {
struct sms_msg_hdr *phdr = (struct sms_msg_hdr *)surb->cb->p;
smsendian_handle_message_header(phdr);
if (urb->actual_length >= phdr->msg_length) {
surb->cb->size = phdr->msg_length;
if (dev->response_alignment &&
(phdr->msg_flags & MSG_HDR_FLAG_SPLIT_MSG)) {
surb->cb->offset =
dev->response_alignment +
((phdr->msg_flags >> 8) & 3);
/* sanity check */
if (((int) phdr->msg_length +
surb->cb->offset) > urb->actual_length) {
pr_err("invalid response msglen %d offset %d size %d\n",
phdr->msg_length,
surb->cb->offset,
urb->actual_length);
goto exit_and_resubmit;
}
/* move buffer pointer and
* copy header to its new location */
memcpy((char *) phdr + surb->cb->offset,
phdr, sizeof(struct sms_msg_hdr));
} else
surb->cb->offset = 0;
pr_debug("received %s(%d) size: %d\n",
smscore_translate_msg(phdr->msg_type),
phdr->msg_type, phdr->msg_length);
smsendian_handle_rx_message((struct sms_msg_data *) phdr);
smscore_onresponse(dev->coredev, surb->cb);
surb->cb = NULL;
} else {
pr_err("invalid response msglen %d actual %d\n",
phdr->msg_length, urb->actual_length);
}
} else
pr_err("error, urb status %d, %d bytes\n",
urb->status, urb->actual_length);
exit_and_resubmit:
[media] smsusb: don't sleep while atomic smscore_getbuffer() calls internally wait_event(), with can sleep. As smsusb_onresponse() is called on interrupt context, this causes the following warning: BUG: sleeping function called from invalid context at drivers/media/common/siano/smscoreapi.c:1653 in_atomic(): 1, irqs_disabled(): 1, pid: 11084, name: systemd-udevd INFO: lockdep is turned off. irq event stamp: 0 hardirqs last enabled at (0): [< (null)>] (null) hardirqs last disabled at (0): [<ffffffff811480f7>] copy_process.part.7+0x10e7/0x56d0 softirqs last enabled at (0): [<ffffffff81148193>] copy_process.part.7+0x1183/0x56d0 softirqs last disabled at (0): [< (null)>] (null) CPU: 2 PID: 11084 Comm: systemd-udevd Tainted: G B W 4.5.0-rc3+ #47 Hardware name: /NUC5i7RYB, BIOS RYBDWi35.86A.0350.2015.0812.1722 08/12/2015 0000000000000000 ffff8803c6907a80 ffffffff81933901 ffff8802bd916000 ffff8802bd9165c8 ffff8803c6907aa8 ffffffff811c6af5 ffff8802bd916000 ffffffffa0ce9b60 0000000000000675 ffff8803c6907ae8 ffffffff811c6ce5 Call Trace: <IRQ> [<ffffffff81933901>] dump_stack+0x85/0xc4 [<ffffffff811c6af5>] ___might_sleep+0x245/0x3a0 [<ffffffff811c6ce5>] __might_sleep+0x95/0x1a0 [<ffffffffa0ce020a>] ? list_add_locked+0xca/0x140 [smsmdtv] [<ffffffffa0ce3b8d>] smscore_getbuffer+0x7d/0x120 [smsmdtv] [<ffffffff8123819d>] ? trace_hardirqs_off+0xd/0x10 [<ffffffffa0ce3b10>] ? smscore_sendrequest_and_wait.isra.5+0x120/0x120 [smsmdtv] [<ffffffffa0ce020a>] ? list_add_locked+0xca/0x140 [smsmdtv] [<ffffffffa0ce13ca>] ? smscore_putbuffer+0x3a/0x40 [smsmdtv] [<ffffffffa0d107bc>] smsusb_submit_urb+0x2ec/0x4f0 [smsusb] [<ffffffffa0d10e36>] smsusb_onresponse+0x476/0x720 [smsusb] Let's add a work queue to handle the bottom half, preventing this problem. Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-02-16 09:22:27 +00:00
INIT_WORK(&surb->wq, do_submit_urb);
schedule_work(&surb->wq);
}
static int smsusb_submit_urb(struct smsusb_device_t *dev,
struct smsusb_urb_t *surb)
{
if (!surb->cb) {
[media] smsusb: don't sleep while atomic smscore_getbuffer() calls internally wait_event(), with can sleep. As smsusb_onresponse() is called on interrupt context, this causes the following warning: BUG: sleeping function called from invalid context at drivers/media/common/siano/smscoreapi.c:1653 in_atomic(): 1, irqs_disabled(): 1, pid: 11084, name: systemd-udevd INFO: lockdep is turned off. irq event stamp: 0 hardirqs last enabled at (0): [< (null)>] (null) hardirqs last disabled at (0): [<ffffffff811480f7>] copy_process.part.7+0x10e7/0x56d0 softirqs last enabled at (0): [<ffffffff81148193>] copy_process.part.7+0x1183/0x56d0 softirqs last disabled at (0): [< (null)>] (null) CPU: 2 PID: 11084 Comm: systemd-udevd Tainted: G B W 4.5.0-rc3+ #47 Hardware name: /NUC5i7RYB, BIOS RYBDWi35.86A.0350.2015.0812.1722 08/12/2015 0000000000000000 ffff8803c6907a80 ffffffff81933901 ffff8802bd916000 ffff8802bd9165c8 ffff8803c6907aa8 ffffffff811c6af5 ffff8802bd916000 ffffffffa0ce9b60 0000000000000675 ffff8803c6907ae8 ffffffff811c6ce5 Call Trace: <IRQ> [<ffffffff81933901>] dump_stack+0x85/0xc4 [<ffffffff811c6af5>] ___might_sleep+0x245/0x3a0 [<ffffffff811c6ce5>] __might_sleep+0x95/0x1a0 [<ffffffffa0ce020a>] ? list_add_locked+0xca/0x140 [smsmdtv] [<ffffffffa0ce3b8d>] smscore_getbuffer+0x7d/0x120 [smsmdtv] [<ffffffff8123819d>] ? trace_hardirqs_off+0xd/0x10 [<ffffffffa0ce3b10>] ? smscore_sendrequest_and_wait.isra.5+0x120/0x120 [smsmdtv] [<ffffffffa0ce020a>] ? list_add_locked+0xca/0x140 [smsmdtv] [<ffffffffa0ce13ca>] ? smscore_putbuffer+0x3a/0x40 [smsmdtv] [<ffffffffa0d107bc>] smsusb_submit_urb+0x2ec/0x4f0 [smsusb] [<ffffffffa0d10e36>] smsusb_onresponse+0x476/0x720 [smsusb] Let's add a work queue to handle the bottom half, preventing this problem. Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2016-02-16 09:22:27 +00:00
/* This function can sleep */
surb->cb = smscore_getbuffer(dev->coredev);
if (!surb->cb) {
pr_err("smscore_getbuffer(...) returned NULL\n");
return -ENOMEM;
}
}
usb_fill_bulk_urb(
&surb->urb,
dev->udev,
usb_rcvbulkpipe(dev->udev, dev->in_ep),
surb->cb->p,
dev->buffer_size,
smsusb_onresponse,
surb
);
surb->urb.transfer_dma = surb->cb->phys;
surb->urb.transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
return usb_submit_urb(&surb->urb, GFP_ATOMIC);
}
static void smsusb_stop_streaming(struct smsusb_device_t *dev)
{
int i;
for (i = 0; i < MAX_URBS; i++) {
usb_kill_urb(&dev->surbs[i].urb);
if (dev->surbs[i].cb) {
smscore_putbuffer(dev->coredev, dev->surbs[i].cb);
dev->surbs[i].cb = NULL;
}
}
}
static int smsusb_start_streaming(struct smsusb_device_t *dev)
{
int i, rc;
for (i = 0; i < MAX_URBS; i++) {
rc = smsusb_submit_urb(dev, &dev->surbs[i]);
if (rc < 0) {
pr_err("smsusb_submit_urb(...) failed\n");
smsusb_stop_streaming(dev);
break;
}
}
return rc;
}
static int smsusb_sendrequest(void *context, void *buffer, size_t size)
{
struct smsusb_device_t *dev = (struct smsusb_device_t *) context;
struct sms_msg_hdr *phdr;
int dummy, ret;
if (dev->state != SMSUSB_ACTIVE) {
pr_debug("Device not active yet\n");
return -ENOENT;
}
phdr = kmalloc(size, GFP_KERNEL);
if (!phdr)
return -ENOMEM;
memcpy(phdr, buffer, size);
pr_debug("sending %s(%d) size: %d\n",
smscore_translate_msg(phdr->msg_type), phdr->msg_type,
phdr->msg_length);
smsendian_handle_tx_message((struct sms_msg_data *) phdr);
smsendian_handle_message_header((struct sms_msg_hdr *)phdr);
ret = usb_bulk_msg(dev->udev, usb_sndbulkpipe(dev->udev, 2),
phdr, size, &dummy, 1000);
kfree(phdr);
return ret;
}
static char *smsusb1_fw_lkup[] = {
"dvbt_stellar_usb.inp",
"dvbh_stellar_usb.inp",
"tdmb_stellar_usb.inp",
"none",
"dvbt_bda_stellar_usb.inp",
};
static inline char *sms_get_fw_name(int mode, int board_id)
{
char **fw = sms_get_board(board_id)->fw;
return (fw && fw[mode]) ? fw[mode] : smsusb1_fw_lkup[mode];
}
static int smsusb1_load_firmware(struct usb_device *udev, int id, int board_id)
{
const struct firmware *fw;
u8 *fw_buffer;
int rc, dummy;
char *fw_filename;
if (id < 0)
id = sms_get_board(board_id)->default_mode;
if (id < DEVICE_MODE_DVBT || id > DEVICE_MODE_DVBT_BDA) {
pr_err("invalid firmware id specified %d\n", id);
return -EINVAL;
}
fw_filename = sms_get_fw_name(id, board_id);
rc = request_firmware(&fw, fw_filename, &udev->dev);
if (rc < 0) {
pr_warn("failed to open '%s' mode %d, trying again with default firmware\n",
fw_filename, id);
fw_filename = smsusb1_fw_lkup[id];
rc = request_firmware(&fw, fw_filename, &udev->dev);
if (rc < 0) {
pr_warn("failed to open '%s' mode %d\n",
fw_filename, id);
return rc;
}
}
fw_buffer = kmalloc(fw->size, GFP_KERNEL);
if (fw_buffer) {
memcpy(fw_buffer, fw->data, fw->size);
rc = usb_bulk_msg(udev, usb_sndbulkpipe(udev, 2),
fw_buffer, fw->size, &dummy, 1000);
pr_debug("sent %zu(%d) bytes, rc %d\n", fw->size, dummy, rc);
kfree(fw_buffer);
} else {
pr_err("failed to allocate firmware buffer\n");
rc = -ENOMEM;
}
pr_debug("read FW %s, size=%zu\n", fw_filename, fw->size);
release_firmware(fw);
return rc;
}
static void smsusb1_detectmode(void *context, int *mode)
{
char *product_string =
((struct smsusb_device_t *) context)->udev->product;
*mode = DEVICE_MODE_NONE;
if (!product_string) {
product_string = "none";
pr_err("product string not found\n");
} else if (strstr(product_string, "DVBH"))
*mode = 1;
else if (strstr(product_string, "BDA"))
*mode = 4;
else if (strstr(product_string, "DVBT"))
*mode = 0;
else if (strstr(product_string, "TDMB"))
*mode = 2;
pr_debug("%d \"%s\"\n", *mode, product_string);
}
static int smsusb1_setmode(void *context, int mode)
{
struct sms_msg_hdr msg = { MSG_SW_RELOAD_REQ, 0, HIF_TASK,
sizeof(struct sms_msg_hdr), 0 };
if (mode < DEVICE_MODE_DVBT || mode > DEVICE_MODE_DVBT_BDA) {
pr_err("invalid firmware id specified %d\n", mode);
return -EINVAL;
}
return smsusb_sendrequest(context, &msg, sizeof(msg));
}
static void smsusb_term_device(struct usb_interface *intf)
{
struct smsusb_device_t *dev = usb_get_intfdata(intf);
if (dev) {
dev->state = SMSUSB_DISCONNECTED;
smsusb_stop_streaming(dev);
/* unregister from smscore */
if (dev->coredev)
smscore_unregister_device(dev->coredev);
pr_debug("device 0x%p destroyed\n", dev);
kfree(dev);
}
usb_set_intfdata(intf, NULL);
}
static void *siano_media_device_register(struct smsusb_device_t *dev,
int board_id)
{
#ifdef CONFIG_MEDIA_CONTROLLER_DVB
struct media_device *mdev;
struct usb_device *udev = dev->udev;
struct sms_board *board = sms_get_board(board_id);
int ret;
mdev = kzalloc(sizeof(*mdev), GFP_KERNEL);
if (!mdev)
return NULL;
media_device_usb_init(mdev, udev, board->name);
ret = media_device_register(mdev);
if (ret) {
media_device_cleanup(mdev);
kfree(mdev);
return NULL;
}
pr_info("media controller created\n");
return mdev;
#else
return NULL;
#endif
}
static int smsusb_init_device(struct usb_interface *intf, int board_id)
{
struct smsdevice_params_t params;
struct smsusb_device_t *dev;
void *mdev;
int i, rc;
/* create device object */
dev = kzalloc(sizeof(struct smsusb_device_t), GFP_KERNEL);
if (!dev)
return -ENOMEM;
memset(&params, 0, sizeof(params));
usb_set_intfdata(intf, dev);
dev->udev = interface_to_usbdev(intf);
dev->state = SMSUSB_DISCONNECTED;
params.device_type = sms_get_board(board_id)->type;
switch (params.device_type) {
case SMS_STELLAR:
dev->buffer_size = USB1_BUFFER_SIZE;
params.setmode_handler = smsusb1_setmode;
params.detectmode_handler = smsusb1_detectmode;
break;
case SMS_UNKNOWN_TYPE:
pr_err("Unspecified sms device type!\n");
/* fall-thru */
default:
dev->buffer_size = USB2_BUFFER_SIZE;
dev->response_alignment =
le16_to_cpu(dev->udev->ep_in[1]->desc.wMaxPacketSize) -
sizeof(struct sms_msg_hdr);
params.flags |= SMS_DEVICE_FAMILY2;
break;
}
for (i = 0; i < intf->cur_altsetting->desc.bNumEndpoints; i++) {
if (intf->cur_altsetting->endpoint[i].desc. bEndpointAddress & USB_DIR_IN)
dev->in_ep = intf->cur_altsetting->endpoint[i].desc.bEndpointAddress;
else
dev->out_ep = intf->cur_altsetting->endpoint[i].desc.bEndpointAddress;
}
pr_debug("in_ep = %02x, out_ep = %02x\n",
dev->in_ep, dev->out_ep);
params.device = &dev->udev->dev;
params.buffer_size = dev->buffer_size;
params.num_buffers = MAX_BUFFERS;
params.sendrequest_handler = smsusb_sendrequest;
params.context = dev;
usb_make_path(dev->udev, params.devpath, sizeof(params.devpath));
mdev = siano_media_device_register(dev, board_id);
/* register in smscore */
rc = smscore_register_device(&params, &dev->coredev, mdev);
if (rc < 0) {
pr_err("smscore_register_device(...) failed, rc %d\n", rc);
smsusb_term_device(intf);
#ifdef CONFIG_MEDIA_CONTROLLER_DVB
media_device_unregister(mdev);
#endif
kfree(mdev);
return rc;
}
smscore_set_board_id(dev->coredev, board_id);
dev->coredev->is_usb_device = true;
/* initialize urbs */
for (i = 0; i < MAX_URBS; i++) {
dev->surbs[i].dev = dev;
usb_init_urb(&dev->surbs[i].urb);
}
pr_debug("smsusb_start_streaming(...).\n");
rc = smsusb_start_streaming(dev);
if (rc < 0) {
pr_err("smsusb_start_streaming(...) failed\n");
smsusb_term_device(intf);
return rc;
}
dev->state = SMSUSB_ACTIVE;
rc = smscore_start_device(dev->coredev);
if (rc < 0) {
pr_err("smscore_start_device(...) failed\n");
smsusb_term_device(intf);
return rc;
}
pr_debug("device 0x%p created\n", dev);
return rc;
}
static int smsusb_probe(struct usb_interface *intf,
const struct usb_device_id *id)
{
struct usb_device *udev = interface_to_usbdev(intf);
char devpath[32];
int i, rc;
pr_info("board id=%lu, interface number %d\n",
id->driver_info,
intf->cur_altsetting->desc.bInterfaceNumber);
if (sms_get_board(id->driver_info)->intf_num !=
intf->cur_altsetting->desc.bInterfaceNumber) {
pr_debug("interface %d won't be used. Expecting interface %d to popup\n",
intf->cur_altsetting->desc.bInterfaceNumber,
sms_get_board(id->driver_info)->intf_num);
return -ENODEV;
}
if (intf->num_altsetting > 1) {
rc = usb_set_interface(udev,
intf->cur_altsetting->desc.bInterfaceNumber,
0);
if (rc < 0) {
pr_err("usb_set_interface failed, rc %d\n", rc);
return rc;
}
}
pr_debug("smsusb_probe %d\n",
intf->cur_altsetting->desc.bInterfaceNumber);
for (i = 0; i < intf->cur_altsetting->desc.bNumEndpoints; i++) {
pr_debug("endpoint %d %02x %02x %d\n", i,
intf->cur_altsetting->endpoint[i].desc.bEndpointAddress,
intf->cur_altsetting->endpoint[i].desc.bmAttributes,
intf->cur_altsetting->endpoint[i].desc.wMaxPacketSize);
if (intf->cur_altsetting->endpoint[i].desc.bEndpointAddress &
USB_DIR_IN)
rc = usb_clear_halt(udev, usb_rcvbulkpipe(udev,
intf->cur_altsetting->endpoint[i].desc.bEndpointAddress));
else
rc = usb_clear_halt(udev, usb_sndbulkpipe(udev,
intf->cur_altsetting->endpoint[i].desc.bEndpointAddress));
}
if ((udev->actconfig->desc.bNumInterfaces == 2) &&
(intf->cur_altsetting->desc.bInterfaceNumber == 0)) {
pr_debug("rom interface 0 is not used\n");
return -ENODEV;
}
if (id->driver_info == SMS1XXX_BOARD_SIANO_STELLAR_ROM) {
[media] siano: Fix initialization for Stellar models Since kernel 3.8, the initialization for Stellar (sms1000) devices are broken. Those devices have a behaviour different than usual sms1100 and sms2270: they start with one USB ID (devices in cold state), but after firmware load, they get a different USB ID. This weren't docummented at the driver. So, the patches that added support for sms2270 broke it. Properly documment it, and provide a debug log that allows to follow all phases of the device initialization: smsusb_probe: board id=13, interface number 0 smsusb_probe: interface 0 won't be used. Expecting interface 1 to popup smsusb_probe: board id=13, interface number 1 smsusb_probe: smsusb_probe 1 smsusb_probe: endpoint 0 81 02 64 smsusb_probe: endpoint 1 02 02 64 smsusb_probe: stellar device in cold state was found at usb\4-2. smsusb1_load_firmware: sent 38144(38144) bytes, rc 0 smsusb1_load_firmware: read FW dvbt_bda_stellar_usb.inp, size=38144 smsusb_probe: stellar device now in warm state usbcore: registered new interface driver smsusb usb 4-2: USB disconnect, device number 52 usb 4-2: new full-speed USB device number 53 using uhci_hcd usb 4-2: New USB device found, idVendor=187f, idProduct=0100 usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 4-2: Product: SMS DVBT-BDA Receiver usb 4-2: Manufacturer: Siano Mobile Silicon smsusb_probe: board id=1, interface number 0 smsusb_probe: smsusb_probe 0 smsusb_probe: endpoint 0 81 02 64 smsusb_probe: endpoint 1 02 02 64 smsusb_init_device: in_ep = 81, out_ep = 02 smscore_register_device: allocated 50 buffers smscore_register_device: device ffff88012a00bc00 created smsusb_init_device: smsusb_start_streaming(...). smscore_set_device_mode: set device mode to 4 smsusb1_detectmode: 4 "SMS DVBT-BDA Receiver" smsusb_sendrequest: sending MSG_SMS_INIT_DEVICE_REQ(578) size: 12 smsusb_onresponse: received MSG_SMS_INIT_DEVICE_RES(579) size: 12 smscore_set_device_mode: Success setting device mode. smscore_init_ir: IR port has not been detected smscore_start_device: device ffff88012a00bc00 started, rc 0 smsusb_init_device: device 0xffff88002cfa6000 created smsusb_probe: Device initialized with return code 0 DVB: registering new adapter (Siano Stellar Digital Receiver) usb 4-2: DVB: registering adapter 0 frontend 0 (Siano Mobile Digital MDTV Receiver)... smscore_register_client: ffff88012174a000 693 1 sms_board_dvb3_event: DVB3_EVENT_HOTPLUG smsdvb_hotplug: success smsdvb_module_init: Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com> Tested-by: André Roth <neolynx@gmail.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-09-12 20:00:00 +00:00
/* Detected a Siano Stellar uninitialized */
snprintf(devpath, sizeof(devpath), "usb\\%d-%s",
udev->bus->busnum, udev->devpath);
pr_info("stellar device in cold state was found at %s.\n",
devpath);
[media] siano: Fix initialization for Stellar models Since kernel 3.8, the initialization for Stellar (sms1000) devices are broken. Those devices have a behaviour different than usual sms1100 and sms2270: they start with one USB ID (devices in cold state), but after firmware load, they get a different USB ID. This weren't docummented at the driver. So, the patches that added support for sms2270 broke it. Properly documment it, and provide a debug log that allows to follow all phases of the device initialization: smsusb_probe: board id=13, interface number 0 smsusb_probe: interface 0 won't be used. Expecting interface 1 to popup smsusb_probe: board id=13, interface number 1 smsusb_probe: smsusb_probe 1 smsusb_probe: endpoint 0 81 02 64 smsusb_probe: endpoint 1 02 02 64 smsusb_probe: stellar device in cold state was found at usb\4-2. smsusb1_load_firmware: sent 38144(38144) bytes, rc 0 smsusb1_load_firmware: read FW dvbt_bda_stellar_usb.inp, size=38144 smsusb_probe: stellar device now in warm state usbcore: registered new interface driver smsusb usb 4-2: USB disconnect, device number 52 usb 4-2: new full-speed USB device number 53 using uhci_hcd usb 4-2: New USB device found, idVendor=187f, idProduct=0100 usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 4-2: Product: SMS DVBT-BDA Receiver usb 4-2: Manufacturer: Siano Mobile Silicon smsusb_probe: board id=1, interface number 0 smsusb_probe: smsusb_probe 0 smsusb_probe: endpoint 0 81 02 64 smsusb_probe: endpoint 1 02 02 64 smsusb_init_device: in_ep = 81, out_ep = 02 smscore_register_device: allocated 50 buffers smscore_register_device: device ffff88012a00bc00 created smsusb_init_device: smsusb_start_streaming(...). smscore_set_device_mode: set device mode to 4 smsusb1_detectmode: 4 "SMS DVBT-BDA Receiver" smsusb_sendrequest: sending MSG_SMS_INIT_DEVICE_REQ(578) size: 12 smsusb_onresponse: received MSG_SMS_INIT_DEVICE_RES(579) size: 12 smscore_set_device_mode: Success setting device mode. smscore_init_ir: IR port has not been detected smscore_start_device: device ffff88012a00bc00 started, rc 0 smsusb_init_device: device 0xffff88002cfa6000 created smsusb_probe: Device initialized with return code 0 DVB: registering new adapter (Siano Stellar Digital Receiver) usb 4-2: DVB: registering adapter 0 frontend 0 (Siano Mobile Digital MDTV Receiver)... smscore_register_client: ffff88012174a000 693 1 sms_board_dvb3_event: DVB3_EVENT_HOTPLUG smsdvb_hotplug: success smsdvb_module_init: Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com> Tested-by: André Roth <neolynx@gmail.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-09-12 20:00:00 +00:00
rc = smsusb1_load_firmware(
udev, smscore_registry_getmode(devpath),
id->driver_info);
[media] siano: Fix initialization for Stellar models Since kernel 3.8, the initialization for Stellar (sms1000) devices are broken. Those devices have a behaviour different than usual sms1100 and sms2270: they start with one USB ID (devices in cold state), but after firmware load, they get a different USB ID. This weren't docummented at the driver. So, the patches that added support for sms2270 broke it. Properly documment it, and provide a debug log that allows to follow all phases of the device initialization: smsusb_probe: board id=13, interface number 0 smsusb_probe: interface 0 won't be used. Expecting interface 1 to popup smsusb_probe: board id=13, interface number 1 smsusb_probe: smsusb_probe 1 smsusb_probe: endpoint 0 81 02 64 smsusb_probe: endpoint 1 02 02 64 smsusb_probe: stellar device in cold state was found at usb\4-2. smsusb1_load_firmware: sent 38144(38144) bytes, rc 0 smsusb1_load_firmware: read FW dvbt_bda_stellar_usb.inp, size=38144 smsusb_probe: stellar device now in warm state usbcore: registered new interface driver smsusb usb 4-2: USB disconnect, device number 52 usb 4-2: new full-speed USB device number 53 using uhci_hcd usb 4-2: New USB device found, idVendor=187f, idProduct=0100 usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 4-2: Product: SMS DVBT-BDA Receiver usb 4-2: Manufacturer: Siano Mobile Silicon smsusb_probe: board id=1, interface number 0 smsusb_probe: smsusb_probe 0 smsusb_probe: endpoint 0 81 02 64 smsusb_probe: endpoint 1 02 02 64 smsusb_init_device: in_ep = 81, out_ep = 02 smscore_register_device: allocated 50 buffers smscore_register_device: device ffff88012a00bc00 created smsusb_init_device: smsusb_start_streaming(...). smscore_set_device_mode: set device mode to 4 smsusb1_detectmode: 4 "SMS DVBT-BDA Receiver" smsusb_sendrequest: sending MSG_SMS_INIT_DEVICE_REQ(578) size: 12 smsusb_onresponse: received MSG_SMS_INIT_DEVICE_RES(579) size: 12 smscore_set_device_mode: Success setting device mode. smscore_init_ir: IR port has not been detected smscore_start_device: device ffff88012a00bc00 started, rc 0 smsusb_init_device: device 0xffff88002cfa6000 created smsusb_probe: Device initialized with return code 0 DVB: registering new adapter (Siano Stellar Digital Receiver) usb 4-2: DVB: registering adapter 0 frontend 0 (Siano Mobile Digital MDTV Receiver)... smscore_register_client: ffff88012174a000 693 1 sms_board_dvb3_event: DVB3_EVENT_HOTPLUG smsdvb_hotplug: success smsdvb_module_init: Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com> Tested-by: André Roth <neolynx@gmail.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-09-12 20:00:00 +00:00
/* This device will reset and gain another USB ID */
if (!rc)
pr_info("stellar device now in warm state\n");
[media] siano: Fix initialization for Stellar models Since kernel 3.8, the initialization for Stellar (sms1000) devices are broken. Those devices have a behaviour different than usual sms1100 and sms2270: they start with one USB ID (devices in cold state), but after firmware load, they get a different USB ID. This weren't docummented at the driver. So, the patches that added support for sms2270 broke it. Properly documment it, and provide a debug log that allows to follow all phases of the device initialization: smsusb_probe: board id=13, interface number 0 smsusb_probe: interface 0 won't be used. Expecting interface 1 to popup smsusb_probe: board id=13, interface number 1 smsusb_probe: smsusb_probe 1 smsusb_probe: endpoint 0 81 02 64 smsusb_probe: endpoint 1 02 02 64 smsusb_probe: stellar device in cold state was found at usb\4-2. smsusb1_load_firmware: sent 38144(38144) bytes, rc 0 smsusb1_load_firmware: read FW dvbt_bda_stellar_usb.inp, size=38144 smsusb_probe: stellar device now in warm state usbcore: registered new interface driver smsusb usb 4-2: USB disconnect, device number 52 usb 4-2: new full-speed USB device number 53 using uhci_hcd usb 4-2: New USB device found, idVendor=187f, idProduct=0100 usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 4-2: Product: SMS DVBT-BDA Receiver usb 4-2: Manufacturer: Siano Mobile Silicon smsusb_probe: board id=1, interface number 0 smsusb_probe: smsusb_probe 0 smsusb_probe: endpoint 0 81 02 64 smsusb_probe: endpoint 1 02 02 64 smsusb_init_device: in_ep = 81, out_ep = 02 smscore_register_device: allocated 50 buffers smscore_register_device: device ffff88012a00bc00 created smsusb_init_device: smsusb_start_streaming(...). smscore_set_device_mode: set device mode to 4 smsusb1_detectmode: 4 "SMS DVBT-BDA Receiver" smsusb_sendrequest: sending MSG_SMS_INIT_DEVICE_REQ(578) size: 12 smsusb_onresponse: received MSG_SMS_INIT_DEVICE_RES(579) size: 12 smscore_set_device_mode: Success setting device mode. smscore_init_ir: IR port has not been detected smscore_start_device: device ffff88012a00bc00 started, rc 0 smsusb_init_device: device 0xffff88002cfa6000 created smsusb_probe: Device initialized with return code 0 DVB: registering new adapter (Siano Stellar Digital Receiver) usb 4-2: DVB: registering adapter 0 frontend 0 (Siano Mobile Digital MDTV Receiver)... smscore_register_client: ffff88012174a000 693 1 sms_board_dvb3_event: DVB3_EVENT_HOTPLUG smsdvb_hotplug: success smsdvb_module_init: Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com> Tested-by: André Roth <neolynx@gmail.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-09-12 20:00:00 +00:00
else
pr_err("Failed to put stellar in warm state. Error: %d\n",
rc);
[media] siano: Fix initialization for Stellar models Since kernel 3.8, the initialization for Stellar (sms1000) devices are broken. Those devices have a behaviour different than usual sms1100 and sms2270: they start with one USB ID (devices in cold state), but after firmware load, they get a different USB ID. This weren't docummented at the driver. So, the patches that added support for sms2270 broke it. Properly documment it, and provide a debug log that allows to follow all phases of the device initialization: smsusb_probe: board id=13, interface number 0 smsusb_probe: interface 0 won't be used. Expecting interface 1 to popup smsusb_probe: board id=13, interface number 1 smsusb_probe: smsusb_probe 1 smsusb_probe: endpoint 0 81 02 64 smsusb_probe: endpoint 1 02 02 64 smsusb_probe: stellar device in cold state was found at usb\4-2. smsusb1_load_firmware: sent 38144(38144) bytes, rc 0 smsusb1_load_firmware: read FW dvbt_bda_stellar_usb.inp, size=38144 smsusb_probe: stellar device now in warm state usbcore: registered new interface driver smsusb usb 4-2: USB disconnect, device number 52 usb 4-2: new full-speed USB device number 53 using uhci_hcd usb 4-2: New USB device found, idVendor=187f, idProduct=0100 usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 4-2: Product: SMS DVBT-BDA Receiver usb 4-2: Manufacturer: Siano Mobile Silicon smsusb_probe: board id=1, interface number 0 smsusb_probe: smsusb_probe 0 smsusb_probe: endpoint 0 81 02 64 smsusb_probe: endpoint 1 02 02 64 smsusb_init_device: in_ep = 81, out_ep = 02 smscore_register_device: allocated 50 buffers smscore_register_device: device ffff88012a00bc00 created smsusb_init_device: smsusb_start_streaming(...). smscore_set_device_mode: set device mode to 4 smsusb1_detectmode: 4 "SMS DVBT-BDA Receiver" smsusb_sendrequest: sending MSG_SMS_INIT_DEVICE_REQ(578) size: 12 smsusb_onresponse: received MSG_SMS_INIT_DEVICE_RES(579) size: 12 smscore_set_device_mode: Success setting device mode. smscore_init_ir: IR port has not been detected smscore_start_device: device ffff88012a00bc00 started, rc 0 smsusb_init_device: device 0xffff88002cfa6000 created smsusb_probe: Device initialized with return code 0 DVB: registering new adapter (Siano Stellar Digital Receiver) usb 4-2: DVB: registering adapter 0 frontend 0 (Siano Mobile Digital MDTV Receiver)... smscore_register_client: ffff88012174a000 693 1 sms_board_dvb3_event: DVB3_EVENT_HOTPLUG smsdvb_hotplug: success smsdvb_module_init: Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com> Tested-by: André Roth <neolynx@gmail.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-09-12 20:00:00 +00:00
return rc;
} else {
rc = smsusb_init_device(intf, id->driver_info);
}
pr_info("Device initialized with return code %d\n", rc);
sms_board_load_modules(id->driver_info);
return rc;
}
static void smsusb_disconnect(struct usb_interface *intf)
{
smsusb_term_device(intf);
}
static int smsusb_suspend(struct usb_interface *intf, pm_message_t msg)
{
struct smsusb_device_t *dev = usb_get_intfdata(intf);
printk(KERN_INFO "%s Entering status %d.\n", __func__, msg.event);
dev->state = SMSUSB_SUSPENDED;
/*smscore_set_power_mode(dev, SMS_POWER_MODE_SUSPENDED);*/
smsusb_stop_streaming(dev);
return 0;
}
static int smsusb_resume(struct usb_interface *intf)
{
int rc, i;
struct smsusb_device_t *dev = usb_get_intfdata(intf);
struct usb_device *udev = interface_to_usbdev(intf);
printk(KERN_INFO "%s Entering.\n", __func__);
usb_clear_halt(udev, usb_rcvbulkpipe(udev, dev->in_ep));
usb_clear_halt(udev, usb_sndbulkpipe(udev, dev->out_ep));
for (i = 0; i < intf->cur_altsetting->desc.bNumEndpoints; i++)
printk(KERN_INFO "endpoint %d %02x %02x %d\n", i,
intf->cur_altsetting->endpoint[i].desc.bEndpointAddress,
intf->cur_altsetting->endpoint[i].desc.bmAttributes,
intf->cur_altsetting->endpoint[i].desc.wMaxPacketSize);
if (intf->num_altsetting > 0) {
rc = usb_set_interface(udev,
intf->cur_altsetting->desc.
bInterfaceNumber, 0);
if (rc < 0) {
printk(KERN_INFO "%s usb_set_interface failed, rc %d\n",
__func__, rc);
return rc;
}
}
smsusb_start_streaming(dev);
return 0;
}
static const struct usb_device_id smsusb_id_table[] = {
[media] siano: Fix initialization for Stellar models Since kernel 3.8, the initialization for Stellar (sms1000) devices are broken. Those devices have a behaviour different than usual sms1100 and sms2270: they start with one USB ID (devices in cold state), but after firmware load, they get a different USB ID. This weren't docummented at the driver. So, the patches that added support for sms2270 broke it. Properly documment it, and provide a debug log that allows to follow all phases of the device initialization: smsusb_probe: board id=13, interface number 0 smsusb_probe: interface 0 won't be used. Expecting interface 1 to popup smsusb_probe: board id=13, interface number 1 smsusb_probe: smsusb_probe 1 smsusb_probe: endpoint 0 81 02 64 smsusb_probe: endpoint 1 02 02 64 smsusb_probe: stellar device in cold state was found at usb\4-2. smsusb1_load_firmware: sent 38144(38144) bytes, rc 0 smsusb1_load_firmware: read FW dvbt_bda_stellar_usb.inp, size=38144 smsusb_probe: stellar device now in warm state usbcore: registered new interface driver smsusb usb 4-2: USB disconnect, device number 52 usb 4-2: new full-speed USB device number 53 using uhci_hcd usb 4-2: New USB device found, idVendor=187f, idProduct=0100 usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 4-2: Product: SMS DVBT-BDA Receiver usb 4-2: Manufacturer: Siano Mobile Silicon smsusb_probe: board id=1, interface number 0 smsusb_probe: smsusb_probe 0 smsusb_probe: endpoint 0 81 02 64 smsusb_probe: endpoint 1 02 02 64 smsusb_init_device: in_ep = 81, out_ep = 02 smscore_register_device: allocated 50 buffers smscore_register_device: device ffff88012a00bc00 created smsusb_init_device: smsusb_start_streaming(...). smscore_set_device_mode: set device mode to 4 smsusb1_detectmode: 4 "SMS DVBT-BDA Receiver" smsusb_sendrequest: sending MSG_SMS_INIT_DEVICE_REQ(578) size: 12 smsusb_onresponse: received MSG_SMS_INIT_DEVICE_RES(579) size: 12 smscore_set_device_mode: Success setting device mode. smscore_init_ir: IR port has not been detected smscore_start_device: device ffff88012a00bc00 started, rc 0 smsusb_init_device: device 0xffff88002cfa6000 created smsusb_probe: Device initialized with return code 0 DVB: registering new adapter (Siano Stellar Digital Receiver) usb 4-2: DVB: registering adapter 0 frontend 0 (Siano Mobile Digital MDTV Receiver)... smscore_register_client: ffff88012174a000 693 1 sms_board_dvb3_event: DVB3_EVENT_HOTPLUG smsdvb_hotplug: success smsdvb_module_init: Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com> Tested-by: André Roth <neolynx@gmail.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-09-12 20:00:00 +00:00
/* This device is only present before firmware load */
{ USB_DEVICE(0x187f, 0x0010),
[media] siano: Fix initialization for Stellar models Since kernel 3.8, the initialization for Stellar (sms1000) devices are broken. Those devices have a behaviour different than usual sms1100 and sms2270: they start with one USB ID (devices in cold state), but after firmware load, they get a different USB ID. This weren't docummented at the driver. So, the patches that added support for sms2270 broke it. Properly documment it, and provide a debug log that allows to follow all phases of the device initialization: smsusb_probe: board id=13, interface number 0 smsusb_probe: interface 0 won't be used. Expecting interface 1 to popup smsusb_probe: board id=13, interface number 1 smsusb_probe: smsusb_probe 1 smsusb_probe: endpoint 0 81 02 64 smsusb_probe: endpoint 1 02 02 64 smsusb_probe: stellar device in cold state was found at usb\4-2. smsusb1_load_firmware: sent 38144(38144) bytes, rc 0 smsusb1_load_firmware: read FW dvbt_bda_stellar_usb.inp, size=38144 smsusb_probe: stellar device now in warm state usbcore: registered new interface driver smsusb usb 4-2: USB disconnect, device number 52 usb 4-2: new full-speed USB device number 53 using uhci_hcd usb 4-2: New USB device found, idVendor=187f, idProduct=0100 usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 4-2: Product: SMS DVBT-BDA Receiver usb 4-2: Manufacturer: Siano Mobile Silicon smsusb_probe: board id=1, interface number 0 smsusb_probe: smsusb_probe 0 smsusb_probe: endpoint 0 81 02 64 smsusb_probe: endpoint 1 02 02 64 smsusb_init_device: in_ep = 81, out_ep = 02 smscore_register_device: allocated 50 buffers smscore_register_device: device ffff88012a00bc00 created smsusb_init_device: smsusb_start_streaming(...). smscore_set_device_mode: set device mode to 4 smsusb1_detectmode: 4 "SMS DVBT-BDA Receiver" smsusb_sendrequest: sending MSG_SMS_INIT_DEVICE_REQ(578) size: 12 smsusb_onresponse: received MSG_SMS_INIT_DEVICE_RES(579) size: 12 smscore_set_device_mode: Success setting device mode. smscore_init_ir: IR port has not been detected smscore_start_device: device ffff88012a00bc00 started, rc 0 smsusb_init_device: device 0xffff88002cfa6000 created smsusb_probe: Device initialized with return code 0 DVB: registering new adapter (Siano Stellar Digital Receiver) usb 4-2: DVB: registering adapter 0 frontend 0 (Siano Mobile Digital MDTV Receiver)... smscore_register_client: ffff88012174a000 693 1 sms_board_dvb3_event: DVB3_EVENT_HOTPLUG smsdvb_hotplug: success smsdvb_module_init: Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com> Tested-by: André Roth <neolynx@gmail.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-09-12 20:00:00 +00:00
.driver_info = SMS1XXX_BOARD_SIANO_STELLAR_ROM },
/* This device pops up after firmware load */
{ USB_DEVICE(0x187f, 0x0100),
.driver_info = SMS1XXX_BOARD_SIANO_STELLAR },
[media] siano: Fix initialization for Stellar models Since kernel 3.8, the initialization for Stellar (sms1000) devices are broken. Those devices have a behaviour different than usual sms1100 and sms2270: they start with one USB ID (devices in cold state), but after firmware load, they get a different USB ID. This weren't docummented at the driver. So, the patches that added support for sms2270 broke it. Properly documment it, and provide a debug log that allows to follow all phases of the device initialization: smsusb_probe: board id=13, interface number 0 smsusb_probe: interface 0 won't be used. Expecting interface 1 to popup smsusb_probe: board id=13, interface number 1 smsusb_probe: smsusb_probe 1 smsusb_probe: endpoint 0 81 02 64 smsusb_probe: endpoint 1 02 02 64 smsusb_probe: stellar device in cold state was found at usb\4-2. smsusb1_load_firmware: sent 38144(38144) bytes, rc 0 smsusb1_load_firmware: read FW dvbt_bda_stellar_usb.inp, size=38144 smsusb_probe: stellar device now in warm state usbcore: registered new interface driver smsusb usb 4-2: USB disconnect, device number 52 usb 4-2: new full-speed USB device number 53 using uhci_hcd usb 4-2: New USB device found, idVendor=187f, idProduct=0100 usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 4-2: Product: SMS DVBT-BDA Receiver usb 4-2: Manufacturer: Siano Mobile Silicon smsusb_probe: board id=1, interface number 0 smsusb_probe: smsusb_probe 0 smsusb_probe: endpoint 0 81 02 64 smsusb_probe: endpoint 1 02 02 64 smsusb_init_device: in_ep = 81, out_ep = 02 smscore_register_device: allocated 50 buffers smscore_register_device: device ffff88012a00bc00 created smsusb_init_device: smsusb_start_streaming(...). smscore_set_device_mode: set device mode to 4 smsusb1_detectmode: 4 "SMS DVBT-BDA Receiver" smsusb_sendrequest: sending MSG_SMS_INIT_DEVICE_REQ(578) size: 12 smsusb_onresponse: received MSG_SMS_INIT_DEVICE_RES(579) size: 12 smscore_set_device_mode: Success setting device mode. smscore_init_ir: IR port has not been detected smscore_start_device: device ffff88012a00bc00 started, rc 0 smsusb_init_device: device 0xffff88002cfa6000 created smsusb_probe: Device initialized with return code 0 DVB: registering new adapter (Siano Stellar Digital Receiver) usb 4-2: DVB: registering adapter 0 frontend 0 (Siano Mobile Digital MDTV Receiver)... smscore_register_client: ffff88012174a000 693 1 sms_board_dvb3_event: DVB3_EVENT_HOTPLUG smsdvb_hotplug: success smsdvb_module_init: Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com> Tested-by: André Roth <neolynx@gmail.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-09-12 20:00:00 +00:00
{ USB_DEVICE(0x187f, 0x0200),
.driver_info = SMS1XXX_BOARD_SIANO_NOVA_A },
{ USB_DEVICE(0x187f, 0x0201),
.driver_info = SMS1XXX_BOARD_SIANO_NOVA_B },
{ USB_DEVICE(0x187f, 0x0300),
.driver_info = SMS1XXX_BOARD_SIANO_VEGA },
{ USB_DEVICE(0x2040, 0x1700),
.driver_info = SMS1XXX_BOARD_HAUPPAUGE_CATAMOUNT },
{ USB_DEVICE(0x2040, 0x1800),
.driver_info = SMS1XXX_BOARD_HAUPPAUGE_OKEMO_A },
{ USB_DEVICE(0x2040, 0x1801),
.driver_info = SMS1XXX_BOARD_HAUPPAUGE_OKEMO_B },
{ USB_DEVICE(0x2040, 0x2000),
.driver_info = SMS1XXX_BOARD_HAUPPAUGE_TIGER_MINICARD },
{ USB_DEVICE(0x2040, 0x2009),
.driver_info = SMS1XXX_BOARD_HAUPPAUGE_TIGER_MINICARD_R2 },
{ USB_DEVICE(0x2040, 0x200a),
.driver_info = SMS1XXX_BOARD_HAUPPAUGE_TIGER_MINICARD },
{ USB_DEVICE(0x2040, 0x2010),
.driver_info = SMS1XXX_BOARD_HAUPPAUGE_TIGER_MINICARD },
{ USB_DEVICE(0x2040, 0x2011),
.driver_info = SMS1XXX_BOARD_HAUPPAUGE_TIGER_MINICARD },
{ USB_DEVICE(0x2040, 0x2019),
.driver_info = SMS1XXX_BOARD_HAUPPAUGE_TIGER_MINICARD },
{ USB_DEVICE(0x2040, 0x5500),
.driver_info = SMS1XXX_BOARD_HAUPPAUGE_WINDHAM },
{ USB_DEVICE(0x2040, 0x5510),
.driver_info = SMS1XXX_BOARD_HAUPPAUGE_WINDHAM },
{ USB_DEVICE(0x2040, 0x5520),
.driver_info = SMS1XXX_BOARD_HAUPPAUGE_WINDHAM },
{ USB_DEVICE(0x2040, 0x5530),
.driver_info = SMS1XXX_BOARD_HAUPPAUGE_WINDHAM },
{ USB_DEVICE(0x2040, 0x5580),
.driver_info = SMS1XXX_BOARD_HAUPPAUGE_WINDHAM },
{ USB_DEVICE(0x2040, 0x5590),
.driver_info = SMS1XXX_BOARD_HAUPPAUGE_WINDHAM },
{ USB_DEVICE(0x187f, 0x0202),
.driver_info = SMS1XXX_BOARD_SIANO_NICE },
{ USB_DEVICE(0x187f, 0x0301),
.driver_info = SMS1XXX_BOARD_SIANO_VENICE },
{ USB_DEVICE(0x2040, 0xb900),
.driver_info = SMS1XXX_BOARD_HAUPPAUGE_WINDHAM },
{ USB_DEVICE(0x2040, 0xb910),
.driver_info = SMS1XXX_BOARD_HAUPPAUGE_WINDHAM },
{ USB_DEVICE(0x2040, 0xb980),
.driver_info = SMS1XXX_BOARD_HAUPPAUGE_WINDHAM },
{ USB_DEVICE(0x2040, 0xb990),
.driver_info = SMS1XXX_BOARD_HAUPPAUGE_WINDHAM },
{ USB_DEVICE(0x2040, 0xc000),
.driver_info = SMS1XXX_BOARD_HAUPPAUGE_WINDHAM },
{ USB_DEVICE(0x2040, 0xc010),
.driver_info = SMS1XXX_BOARD_HAUPPAUGE_WINDHAM },
{ USB_DEVICE(0x2040, 0xc080),
.driver_info = SMS1XXX_BOARD_HAUPPAUGE_WINDHAM },
{ USB_DEVICE(0x2040, 0xc090),
.driver_info = SMS1XXX_BOARD_HAUPPAUGE_WINDHAM },
{ USB_DEVICE(0x2040, 0xc0a0),
.driver_info = SMS1XXX_BOARD_HAUPPAUGE_WINDHAM },
{ USB_DEVICE(0x2040, 0xf5a0),
.driver_info = SMS1XXX_BOARD_HAUPPAUGE_WINDHAM },
{ USB_DEVICE(0x187f, 0x0202),
.driver_info = SMS1XXX_BOARD_SIANO_NICE },
{ USB_DEVICE(0x187f, 0x0301),
.driver_info = SMS1XXX_BOARD_SIANO_VENICE },
{ USB_DEVICE(0x187f, 0x0302),
.driver_info = SMS1XXX_BOARD_SIANO_VENICE },
{ USB_DEVICE(0x187f, 0x0310),
.driver_info = SMS1XXX_BOARD_SIANO_MING },
{ USB_DEVICE(0x187f, 0x0500),
.driver_info = SMS1XXX_BOARD_SIANO_PELE },
{ USB_DEVICE(0x187f, 0x0600),
.driver_info = SMS1XXX_BOARD_SIANO_RIO },
{ USB_DEVICE(0x187f, 0x0700),
.driver_info = SMS1XXX_BOARD_SIANO_DENVER_2160 },
{ USB_DEVICE(0x187f, 0x0800),
.driver_info = SMS1XXX_BOARD_SIANO_DENVER_1530 },
{ USB_DEVICE(0x19D2, 0x0086),
.driver_info = SMS1XXX_BOARD_ZTE_DVB_DATA_CARD },
{ USB_DEVICE(0x19D2, 0x0078),
.driver_info = SMS1XXX_BOARD_ONDA_MDTV_DATA_CARD },
{ USB_DEVICE(0x3275, 0x0080),
.driver_info = SMS1XXX_BOARD_SIANO_RIO },
{ USB_DEVICE(0x2013, 0x0257),
.driver_info = SMS1XXX_BOARD_PCTV_77E },
{ } /* Terminating entry */
};
MODULE_DEVICE_TABLE(usb, smsusb_id_table);
static struct usb_driver smsusb_driver = {
.name = "smsusb",
.probe = smsusb_probe,
.disconnect = smsusb_disconnect,
.id_table = smsusb_id_table,
.suspend = smsusb_suspend,
.resume = smsusb_resume,
};
USB: convert drivers/media/* to use module_usb_driver() This converts the drivers in drivers/media/* to use the module_usb_driver() macro which makes the code smaller and a bit simpler. Added bonus is that it removes some unneeded kernel log messages about drivers loading and/or unloading. Cc: Mauro Carvalho Chehab <mchehab@infradead.org> Cc: Luca Risolia <luca.risolia@studio.unibo.it> Cc: Jean-Francois Moine <moinejf@free.fr> Cc: Frank Zago <frank@zago.net> Cc: Olivier Lorin <o.lorin@laposte.net> Cc: Erik Andren <erik.andren@gmail.com> Cc: Hans de Goede <hdegoede@redhat.com> Cc: Brian Johnson <brijohn@gmail.com> Cc: Leandro Costantino <lcostantino@gmail.com> Cc: Antoine Jacquet <royale@zerezo.com> Cc: Jarod Wilson <jarod@redhat.com> Cc: Florian Mickler <florian@mickler.org> Cc: Antti Palosaari <crope@iki.fi> Cc: Michael Krufky <mkrufky@kernellabs.com> Cc: "David Härdeman" <david@hardeman.nu> Cc: Florent Audebert <florent.audebert@anevia.com> Cc: Sam Doshi <sam@metal-fish.co.uk> Cc: Manu Abraham <manu@linuxtv.org> Cc: Olivier Grenie <olivier.grenie@dibcom.fr> Cc: Patrick Boettcher <patrick.boettcher@dibcom.fr> Cc: "Igor M. Liplianin" <liplianin@me.by> Cc: Derek Kelly <user.vdr@gmail.com> Cc: Malcolm Priestley <tvboxspy@gmail.com> Cc: Steven Toth <stoth@kernellabs.com> Cc: "André Weidemann" <Andre.Weidemann@web.de> Cc: Martin Wilks <m.wilks@technisat.com> Cc: Tejun Heo <tj@kernel.org> Cc: Jose Alberto Reguero <jareguero@telefonica.net> Cc: David Henningsson <david.henningsson@canonical.com> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Joe Perches <joe@perches.com> Cc: Jesper Juhl <jj@chaosbits.net> Cc: Lucas De Marchi <lucas.demarchi@profusion.mobi> Cc: Hans Verkuil <hans.verkuil@cisco.com> Cc: Alexey Khoroshilov <khoroshilov@ispras.ru> Cc: Anssi Hannula <anssi.hannula@iki.fi> Cc: Rafi Rubin <rafi@seas.upenn.edu> Cc: Dan Carpenter <error27@gmail.com> Cc: Paul Bender <pebender@gmail.com> Cc: Devin Heitmueller <dheitmueller@kernellabs.com> Cc: "Márcio A Alves" <froooozen@gmail.com> Cc: Julia Lawall <julia@diku.dk> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Chris Rankin <rankincj@yahoo.com> Cc: Lee Jones <lee.jones@canonical.com> Cc: Andy Walls <awalls@md.metrocast.net> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Mike Frysinger <vapier@gentoo.org> Cc: Dean Anderson <linux-dev@sensoray.com> Cc: Pete Eberlein <pete@sensoray.com> Cc: Arvydas Sidorenko <asido4@gmail.com> Cc: Andrea Anacleto <andreaanacleto@libero.it> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-18 17:46:12 +00:00
module_usb_driver(smsusb_driver);
V4L/DVB (10750): import changes from Siano Import the following changes from Uri Shkolnik * Two-ways merge with Siano internal repository * Continuing with DVB sub-system separation * kconfig and makefile updates * Code cleanup This is a work-in-progress sync with Siano's internal repository. Some changes had to be altered or dropped in order not to break the build. This breaks normal operation for the current driver, but it is being committed now for tracking purposes. These changes introduce the following checkpatch.pl violations: ERROR: do not use C99 // comments 156: FILE: linux/drivers/media/dvb/siano/smscoreapi.c:1373: +//#ifdef DVB_CORE ERROR: do not use C99 // comments 157: FILE: linux/drivers/media/dvb/siano/smscoreapi.c:1374: +// smsdvb_unregister(); ERROR: do not use C99 // comments 158: FILE: linux/drivers/media/dvb/siano/smscoreapi.c:1375: +//#endif WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable 163: FILE: linux/drivers/media/dvb/siano/smscoreapi.c:1380: +EXPORT_SYMBOL(smscore_onresponse); WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable 164: FILE: linux/drivers/media/dvb/siano/smscoreapi.c:1381: +EXPORT_SYMBOL(sms_get_board); WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable 165: FILE: linux/drivers/media/dvb/siano/smscoreapi.c:1382: +EXPORT_SYMBOL(sms_debug); WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable 166: FILE: linux/drivers/media/dvb/siano/smscoreapi.c:1383: +EXPORT_SYMBOL(smscore_putbuffer); WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable 167: FILE: linux/drivers/media/dvb/siano/smscoreapi.c:1384: +EXPORT_SYMBOL(smscore_registry_getmode); WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable 168: FILE: linux/drivers/media/dvb/siano/smscoreapi.c:1385: +EXPORT_SYMBOL(smscore_register_device); WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable 169: FILE: linux/drivers/media/dvb/siano/smscoreapi.c:1386: +EXPORT_SYMBOL(smscore_set_board_id); WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable 170: FILE: linux/drivers/media/dvb/siano/smscoreapi.c:1387: +EXPORT_SYMBOL(smscore_start_device); WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable 171: FILE: linux/drivers/media/dvb/siano/smscoreapi.c:1388: +EXPORT_SYMBOL(smsusb_id_table); WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable 172: FILE: linux/drivers/media/dvb/siano/smscoreapi.c:1389: +EXPORT_SYMBOL(smscore_unregister_device); WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable 173: FILE: linux/drivers/media/dvb/siano/smscoreapi.c:1390: +EXPORT_SYMBOL(smscore_getbuffer); WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable 174: FILE: linux/drivers/media/dvb/siano/smscoreapi.c:1391: +EXPORT_SYMBOL(smscore_get_device_mode); WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable 175: FILE: linux/drivers/media/dvb/siano/smscoreapi.c:1392: +EXPORT_SYMBOL(smscore_register_client); WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable 176: FILE: linux/drivers/media/dvb/siano/smscoreapi.c:1393: +EXPORT_SYMBOL(smscore_unregister_hotplug); WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable 177: FILE: linux/drivers/media/dvb/siano/smscoreapi.c:1394: +EXPORT_SYMBOL(smsclient_sendrequest); WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable 178: FILE: linux/drivers/media/dvb/siano/smscoreapi.c:1395: +EXPORT_SYMBOL(smscore_unregister_client); WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable 179: FILE: linux/drivers/media/dvb/siano/smscoreapi.c:1396: +EXPORT_SYMBOL(smscore_get_board_id); WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable 180: FILE: linux/drivers/media/dvb/siano/smscoreapi.c:1397: +EXPORT_SYMBOL(smscore_register_hotplug); WARNING: line over 80 characters 391: FILE: linux/drivers/media/dvb/siano/smscoreapi.h:398: +extern int smscore_get_fw_filename(struct smscore_device_t *coredev, int mode, char* filename); ERROR: "foo* bar" should be "foo *bar" 391: FILE: linux/drivers/media/dvb/siano/smscoreapi.h:398: +extern int smscore_get_fw_filename(struct smscore_device_t *coredev, int mode, char* filename); WARNING: line over 80 characters 392: FILE: linux/drivers/media/dvb/siano/smscoreapi.h:399: +extern int smscore_send_fw_file(struct smscore_device_t *coredev, u8* ufwbuf,int size); ERROR: "foo* bar" should be "foo *bar" 392: FILE: linux/drivers/media/dvb/siano/smscoreapi.h:399: +extern int smscore_send_fw_file(struct smscore_device_t *coredev, u8* ufwbuf,int size); ERROR: space required after that ',' (ctx:VxV) 392: FILE: linux/drivers/media/dvb/siano/smscoreapi.h:399: +extern int smscore_send_fw_file(struct smscore_device_t *coredev, u8* ufwbuf,int size); ^ WARNING: __func__ should be used instead of gcc specific __FUNCTION__ 489: FILE: linux/drivers/media/dvb/siano/smsusb.c:443: + printk(KERN_INFO"%s Entering status %d.\n", __FUNCTION__, msg.event); WARNING: __func__ should be used instead of gcc specific __FUNCTION__ 501: FILE: linux/drivers/media/dvb/siano/smsusb.c:455: + printk(KERN_INFO "%s Entering.\n", __FUNCTION__); ERROR: space prohibited before that '++' (ctx:WxB) 505: FILE: linux/drivers/media/dvb/siano/smsusb.c:459: + for (i = 0; i < intf->cur_altsetting->desc.bNumEndpoints; i ++) ^ WARNING: __func__ should be used instead of gcc specific __FUNCTION__ 517: FILE: linux/drivers/media/dvb/siano/smsusb.c:471: + __FUNCTION__, rc); total: 7 errors, 23 warnings, 524 lines checked Signed-off-by: Uri Shkolnik <uris@siano-ms.com> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-08-31 03:44:04 +00:00
MODULE_DESCRIPTION("Driver for the Siano SMS1xxx USB dongle");
V4L/DVB (10750): import changes from Siano Import the following changes from Uri Shkolnik * Two-ways merge with Siano internal repository * Continuing with DVB sub-system separation * kconfig and makefile updates * Code cleanup This is a work-in-progress sync with Siano's internal repository. Some changes had to be altered or dropped in order not to break the build. This breaks normal operation for the current driver, but it is being committed now for tracking purposes. These changes introduce the following checkpatch.pl violations: ERROR: do not use C99 // comments 156: FILE: linux/drivers/media/dvb/siano/smscoreapi.c:1373: +//#ifdef DVB_CORE ERROR: do not use C99 // comments 157: FILE: linux/drivers/media/dvb/siano/smscoreapi.c:1374: +// smsdvb_unregister(); ERROR: do not use C99 // comments 158: FILE: linux/drivers/media/dvb/siano/smscoreapi.c:1375: +//#endif WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable 163: FILE: linux/drivers/media/dvb/siano/smscoreapi.c:1380: +EXPORT_SYMBOL(smscore_onresponse); WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable 164: FILE: linux/drivers/media/dvb/siano/smscoreapi.c:1381: +EXPORT_SYMBOL(sms_get_board); WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable 165: FILE: linux/drivers/media/dvb/siano/smscoreapi.c:1382: +EXPORT_SYMBOL(sms_debug); WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable 166: FILE: linux/drivers/media/dvb/siano/smscoreapi.c:1383: +EXPORT_SYMBOL(smscore_putbuffer); WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable 167: FILE: linux/drivers/media/dvb/siano/smscoreapi.c:1384: +EXPORT_SYMBOL(smscore_registry_getmode); WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable 168: FILE: linux/drivers/media/dvb/siano/smscoreapi.c:1385: +EXPORT_SYMBOL(smscore_register_device); WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable 169: FILE: linux/drivers/media/dvb/siano/smscoreapi.c:1386: +EXPORT_SYMBOL(smscore_set_board_id); WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable 170: FILE: linux/drivers/media/dvb/siano/smscoreapi.c:1387: +EXPORT_SYMBOL(smscore_start_device); WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable 171: FILE: linux/drivers/media/dvb/siano/smscoreapi.c:1388: +EXPORT_SYMBOL(smsusb_id_table); WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable 172: FILE: linux/drivers/media/dvb/siano/smscoreapi.c:1389: +EXPORT_SYMBOL(smscore_unregister_device); WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable 173: FILE: linux/drivers/media/dvb/siano/smscoreapi.c:1390: +EXPORT_SYMBOL(smscore_getbuffer); WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable 174: FILE: linux/drivers/media/dvb/siano/smscoreapi.c:1391: +EXPORT_SYMBOL(smscore_get_device_mode); WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable 175: FILE: linux/drivers/media/dvb/siano/smscoreapi.c:1392: +EXPORT_SYMBOL(smscore_register_client); WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable 176: FILE: linux/drivers/media/dvb/siano/smscoreapi.c:1393: +EXPORT_SYMBOL(smscore_unregister_hotplug); WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable 177: FILE: linux/drivers/media/dvb/siano/smscoreapi.c:1394: +EXPORT_SYMBOL(smsclient_sendrequest); WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable 178: FILE: linux/drivers/media/dvb/siano/smscoreapi.c:1395: +EXPORT_SYMBOL(smscore_unregister_client); WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable 179: FILE: linux/drivers/media/dvb/siano/smscoreapi.c:1396: +EXPORT_SYMBOL(smscore_get_board_id); WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable 180: FILE: linux/drivers/media/dvb/siano/smscoreapi.c:1397: +EXPORT_SYMBOL(smscore_register_hotplug); WARNING: line over 80 characters 391: FILE: linux/drivers/media/dvb/siano/smscoreapi.h:398: +extern int smscore_get_fw_filename(struct smscore_device_t *coredev, int mode, char* filename); ERROR: "foo* bar" should be "foo *bar" 391: FILE: linux/drivers/media/dvb/siano/smscoreapi.h:398: +extern int smscore_get_fw_filename(struct smscore_device_t *coredev, int mode, char* filename); WARNING: line over 80 characters 392: FILE: linux/drivers/media/dvb/siano/smscoreapi.h:399: +extern int smscore_send_fw_file(struct smscore_device_t *coredev, u8* ufwbuf,int size); ERROR: "foo* bar" should be "foo *bar" 392: FILE: linux/drivers/media/dvb/siano/smscoreapi.h:399: +extern int smscore_send_fw_file(struct smscore_device_t *coredev, u8* ufwbuf,int size); ERROR: space required after that ',' (ctx:VxV) 392: FILE: linux/drivers/media/dvb/siano/smscoreapi.h:399: +extern int smscore_send_fw_file(struct smscore_device_t *coredev, u8* ufwbuf,int size); ^ WARNING: __func__ should be used instead of gcc specific __FUNCTION__ 489: FILE: linux/drivers/media/dvb/siano/smsusb.c:443: + printk(KERN_INFO"%s Entering status %d.\n", __FUNCTION__, msg.event); WARNING: __func__ should be used instead of gcc specific __FUNCTION__ 501: FILE: linux/drivers/media/dvb/siano/smsusb.c:455: + printk(KERN_INFO "%s Entering.\n", __FUNCTION__); ERROR: space prohibited before that '++' (ctx:WxB) 505: FILE: linux/drivers/media/dvb/siano/smsusb.c:459: + for (i = 0; i < intf->cur_altsetting->desc.bNumEndpoints; i ++) ^ WARNING: __func__ should be used instead of gcc specific __FUNCTION__ 517: FILE: linux/drivers/media/dvb/siano/smsusb.c:471: + __FUNCTION__, rc); total: 7 errors, 23 warnings, 524 lines checked Signed-off-by: Uri Shkolnik <uris@siano-ms.com> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-08-31 03:44:04 +00:00
MODULE_AUTHOR("Siano Mobile Silicon, INC. (uris@siano-ms.com)");
MODULE_LICENSE("GPL");