linux/kernel/events/ring_buffer.c

752 lines
17 KiB
C
Raw Normal View History

/*
* Performance events ring-buffer code:
*
* Copyright (C) 2008 Thomas Gleixner <tglx@linutronix.de>
* Copyright (C) 2008-2011 Red Hat, Inc., Ingo Molnar
* Copyright (C) 2008-2011 Red Hat, Inc., Peter Zijlstra <pzijlstr@redhat.com>
* Copyright © 2009 Paul Mackerras, IBM Corp. <paulus@au1.ibm.com>
*
* For licensing details see kernel-base/COPYING
*/
#include <linux/perf_event.h>
#include <linux/vmalloc.h>
#include <linux/slab.h>
#include <linux/circ_buf.h>
#include <linux/poll.h>
#include "internal.h"
static void perf_output_wakeup(struct perf_output_handle *handle)
{
atomic_set(&handle->rb->poll, POLLIN);
handle->event->pending_wakeup = 1;
irq_work_queue(&handle->event->pending);
}
/*
* We need to ensure a later event_id doesn't publish a head when a former
* event isn't done writing. However since we need to deal with NMIs we
* cannot fully serialize things.
*
* We only publish the head (and generate a wakeup) when the outer-most
* event completes.
*/
static void perf_output_get_handle(struct perf_output_handle *handle)
{
struct ring_buffer *rb = handle->rb;
preempt_disable();
local_inc(&rb->nest);
handle->wakeup = local_read(&rb->wakeup);
}
static void perf_output_put_handle(struct perf_output_handle *handle)
{
struct ring_buffer *rb = handle->rb;
unsigned long head;
again:
head = local_read(&rb->head);
/*
* IRQ/NMI can happen here, which means we can miss a head update.
*/
if (!local_dec_and_test(&rb->nest))
goto out;
/*
* Since the mmap() consumer (userspace) can run on a different CPU:
*
* kernel user
*
* if (LOAD ->data_tail) { LOAD ->data_head
* (A) smp_rmb() (C)
* STORE $data LOAD $data
* smp_wmb() (B) smp_mb() (D)
* STORE ->data_head STORE ->data_tail
* }
*
* Where A pairs with D, and B pairs with C.
*
* In our case (A) is a control dependency that separates the load of
* the ->data_tail and the stores of $data. In case ->data_tail
* indicates there is no room in the buffer to store $data we do not.
*
* D needs to be a full barrier since it separates the data READ
* from the tail WRITE.
*
* For B a WMB is sufficient since it separates two WRITEs, and for C
* an RMB is sufficient since it separates two READs.
*
* See perf_output_begin().
*/
smp_wmb(); /* B, matches C */
rb->user_page->data_head = head;
/*
* Now check if we missed an update -- rely on previous implied
* compiler barriers to force a re-read.
*/
if (unlikely(head != local_read(&rb->head))) {
local_inc(&rb->nest);
goto again;
}
if (handle->wakeup != local_read(&rb->wakeup))
perf_output_wakeup(handle);
out:
preempt_enable();
}
int perf_output_begin(struct perf_output_handle *handle,
struct perf_event *event, unsigned int size)
{
struct ring_buffer *rb;
unsigned long tail, offset, head;
int have_lost, page_shift;
struct {
struct perf_event_header header;
u64 id;
u64 lost;
} lost_event;
rcu_read_lock();
/*
* For inherited events we send all the output towards the parent.
*/
if (event->parent)
event = event->parent;
rb = rcu_dereference(event->rb);
if (unlikely(!rb))
goto out;
if (unlikely(!rb->nr_pages))
goto out;
handle->rb = rb;
handle->event = event;
have_lost = local_read(&rb->lost);
if (unlikely(have_lost)) {
size += sizeof(lost_event);
if (event->attr.sample_id_all)
size += event->id_header_size;
}
perf_output_get_handle(handle);
do {
tail = READ_ONCE_CTRL(rb->user_page->data_tail);
offset = head = local_read(&rb->head);
if (!rb->overwrite &&
unlikely(CIRC_SPACE(head, tail, perf_data_size(rb)) < size))
goto fail;
/*
* The above forms a control dependency barrier separating the
* @tail load above from the data stores below. Since the @tail
* load is required to compute the branch to fail below.
*
* A, matches D; the full memory barrier userspace SHOULD issue
* after reading the data and before storing the new tail
* position.
*
* See perf_output_put_handle().
*/
head += size;
} while (local_cmpxchg(&rb->head, offset, head) != offset);
/*
* We rely on the implied barrier() by local_cmpxchg() to ensure
* none of the data stores below can be lifted up by the compiler.
*/
if (unlikely(head - local_read(&rb->wakeup) > rb->watermark))
local_add(rb->watermark, &rb->wakeup);
page_shift = PAGE_SHIFT + page_order(rb);
handle->page = (offset >> page_shift) & (rb->nr_pages - 1);
offset &= (1UL << page_shift) - 1;
handle->addr = rb->data_pages[handle->page] + offset;
handle->size = (1UL << page_shift) - offset;
if (unlikely(have_lost)) {
struct perf_sample_data sample_data;
lost_event.header.size = sizeof(lost_event);
lost_event.header.type = PERF_RECORD_LOST;
lost_event.header.misc = 0;
lost_event.id = event->id;
lost_event.lost = local_xchg(&rb->lost, 0);
perf_event_header__init_id(&lost_event.header,
&sample_data, event);
perf_output_put(handle, lost_event);
perf_event__output_id_sample(event, handle, &sample_data);
}
return 0;
fail:
local_inc(&rb->lost);
perf_output_put_handle(handle);
out:
rcu_read_unlock();
return -ENOSPC;
}
unsigned int perf_output_copy(struct perf_output_handle *handle,
const void *buf, unsigned int len)
{
return __output_copy(handle, buf, len);
}
unsigned int perf_output_skip(struct perf_output_handle *handle,
unsigned int len)
{
return __output_skip(handle, NULL, len);
}
void perf_output_end(struct perf_output_handle *handle)
{
perf_output_put_handle(handle);
rcu_read_unlock();
}
static void
ring_buffer_init(struct ring_buffer *rb, long watermark, int flags)
{
long max_size = perf_data_size(rb);
if (watermark)
rb->watermark = min(max_size, watermark);
if (!rb->watermark)
rb->watermark = max_size / 2;
if (flags & RING_BUFFER_WRITABLE)
rb->overwrite = 0;
else
rb->overwrite = 1;
atomic_set(&rb->refcount, 1);
perf: Fix loss of notification with multi-event When you do: $ perf record -e cycles,cycles,cycles noploop 10 You expect about 10,000 samples for each event, i.e., 10s at 1000samples/sec. However, this is not what's happening. You get much fewer samples, maybe 3700 samples/event: $ perf report -D | tail -15 Aggregated stats: TOTAL events: 10998 MMAP events: 66 COMM events: 2 SAMPLE events: 10930 cycles stats: TOTAL events: 3644 SAMPLE events: 3644 cycles stats: TOTAL events: 3642 SAMPLE events: 3642 cycles stats: TOTAL events: 3644 SAMPLE events: 3644 On a Intel Nehalem or even AMD64, there are 4 counters capable of measuring cycles, so there is plenty of space to measure those events without multiplexing (even with the NMI watchdog active). And even with multiplexing, we'd expect roughly the same number of samples per event. The root of the problem was that when the event that caused the buffer to become full was not the first event passed on the cmdline, the user notification would get lost. The notification was sent to the file descriptor of the overflowed event but the perf tool was not polling on it. The perf tool aggregates all samples into a single buffer, i.e., the buffer of the first event. Consequently, it assumes notifications for any event will come via that descriptor. The seemingly straight forward solution of moving the waitq into the ringbuffer object doesn't work because of life-time issues. One could perf_event_set_output() on a fd that you're also blocking on and cause the old rb object to be freed while its waitq would still be referenced by the blocked thread -> FAIL. Therefore link all events to the ringbuffer and broadcast the wakeup from the ringbuffer object to all possible events that could be waited upon. This is rather ugly, and we're open to better solutions but it works for now. Reported-by: Stephane Eranian <eranian@google.com> Finished-by: Stephane Eranian <eranian@google.com> Reviewed-by: Stephane Eranian <eranian@google.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/20111126014731.GA7030@quad Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-11-26 01:47:31 +00:00
INIT_LIST_HEAD(&rb->event_list);
spin_lock_init(&rb->event_lock);
}
perf: Add API for PMUs to write to the AUX area For pmus that wish to write data to ring buffer's AUX area, provide perf_aux_output_{begin,end}() calls to initiate/commit data writes, similarly to perf_output_{begin,end}. These also use the same output handle structure. Also, similarly to software counterparts, these will direct inherited events' output to parents' ring buffers. After the perf_aux_output_begin() returns successfully, handle->size is set to the maximum amount of data that can be written wrt aux_tail pointer, so that no data that the user hasn't seen will be overwritten, therefore this should always be called before hardware writing is enabled. On success, this will return the pointer to pmu driver's private structure allocated for this aux area by pmu::setup_aux. Same pointer can also be retrieved using perf_get_aux() while hardware writing is enabled. PMU driver should pass the actual amount of data written as a parameter to perf_aux_output_end(). All hardware writes should be completed and visible before this one is called. Additionally, perf_aux_output_skip() will adjust output handle and aux_head in case some part of the buffer has to be skipped over to maintain hardware's alignment constraints. Nested writers are forbidden and guards are in place to catch such attempts. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Kaixu Xia <kaixu.xia@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Robert Richter <rric@kernel.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: acme@infradead.org Cc: adrian.hunter@intel.com Cc: kan.liang@intel.com Cc: markus.t.metzger@intel.com Cc: mathieu.poirier@linaro.org Link: http://lkml.kernel.org/r/1421237903-181015-8-git-send-email-alexander.shishkin@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-01-14 12:18:16 +00:00
/*
* This is called before hardware starts writing to the AUX area to
* obtain an output handle and make sure there's room in the buffer.
* When the capture completes, call perf_aux_output_end() to commit
* the recorded data to the buffer.
*
* The ordering is similar to that of perf_output_{begin,end}, with
* the exception of (B), which should be taken care of by the pmu
* driver, since ordering rules will differ depending on hardware.
*/
void *perf_aux_output_begin(struct perf_output_handle *handle,
struct perf_event *event)
{
struct perf_event *output_event = event;
unsigned long aux_head, aux_tail;
struct ring_buffer *rb;
if (output_event->parent)
output_event = output_event->parent;
/*
* Since this will typically be open across pmu::add/pmu::del, we
* grab ring_buffer's refcount instead of holding rcu read lock
* to make sure it doesn't disappear under us.
*/
rb = ring_buffer_get(output_event);
if (!rb)
return NULL;
if (!rb_has_aux(rb) || !atomic_inc_not_zero(&rb->aux_refcount))
goto err;
/*
* Nesting is not supported for AUX area, make sure nested
* writers are caught early
*/
if (WARN_ON_ONCE(local_xchg(&rb->aux_nest, 1)))
goto err_put;
aux_head = local_read(&rb->aux_head);
handle->rb = rb;
handle->event = event;
handle->head = aux_head;
perf: Support overwrite mode for the AUX area This adds support for overwrite mode in the AUX area, which means "keep collecting data till you're stopped", turning AUX area into a circular buffer, where new data overwrites old data. It does not depend on data buffer's overwrite mode, so that it doesn't lose sideband data that is instrumental for processing AUX data. Overwrite mode is enabled at mapping AUX area read only. Even though aux_tail in the buffer's user page might be user writable, it will be ignored in this mode. A PERF_RECORD_AUX with PERF_AUX_FLAG_OVERWRITE set is written to the perf data stream every time an event writes new data to the AUX area. The pmu driver might not be able to infer the exact beginning of the new data in each snapshot, some drivers will only provide the tail, which is aux_offset + aux_size in the AUX record. Consumer has to be able to tell the new data from the old one, for example, by means of time stamps if such are provided in the trace. Consumer is also responsible for disabling any events that might write to the AUX area (thus potentially racing with the consumer) before collecting the data. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Kaixu Xia <kaixu.xia@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Robert Richter <rric@kernel.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: acme@infradead.org Cc: adrian.hunter@intel.com Cc: kan.liang@intel.com Cc: markus.t.metzger@intel.com Cc: mathieu.poirier@linaro.org Link: http://lkml.kernel.org/r/1421237903-181015-9-git-send-email-alexander.shishkin@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-01-14 12:18:17 +00:00
handle->size = 0;
perf: Add API for PMUs to write to the AUX area For pmus that wish to write data to ring buffer's AUX area, provide perf_aux_output_{begin,end}() calls to initiate/commit data writes, similarly to perf_output_{begin,end}. These also use the same output handle structure. Also, similarly to software counterparts, these will direct inherited events' output to parents' ring buffers. After the perf_aux_output_begin() returns successfully, handle->size is set to the maximum amount of data that can be written wrt aux_tail pointer, so that no data that the user hasn't seen will be overwritten, therefore this should always be called before hardware writing is enabled. On success, this will return the pointer to pmu driver's private structure allocated for this aux area by pmu::setup_aux. Same pointer can also be retrieved using perf_get_aux() while hardware writing is enabled. PMU driver should pass the actual amount of data written as a parameter to perf_aux_output_end(). All hardware writes should be completed and visible before this one is called. Additionally, perf_aux_output_skip() will adjust output handle and aux_head in case some part of the buffer has to be skipped over to maintain hardware's alignment constraints. Nested writers are forbidden and guards are in place to catch such attempts. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Kaixu Xia <kaixu.xia@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Robert Richter <rric@kernel.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: acme@infradead.org Cc: adrian.hunter@intel.com Cc: kan.liang@intel.com Cc: markus.t.metzger@intel.com Cc: mathieu.poirier@linaro.org Link: http://lkml.kernel.org/r/1421237903-181015-8-git-send-email-alexander.shishkin@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-01-14 12:18:16 +00:00
/*
perf: Support overwrite mode for the AUX area This adds support for overwrite mode in the AUX area, which means "keep collecting data till you're stopped", turning AUX area into a circular buffer, where new data overwrites old data. It does not depend on data buffer's overwrite mode, so that it doesn't lose sideband data that is instrumental for processing AUX data. Overwrite mode is enabled at mapping AUX area read only. Even though aux_tail in the buffer's user page might be user writable, it will be ignored in this mode. A PERF_RECORD_AUX with PERF_AUX_FLAG_OVERWRITE set is written to the perf data stream every time an event writes new data to the AUX area. The pmu driver might not be able to infer the exact beginning of the new data in each snapshot, some drivers will only provide the tail, which is aux_offset + aux_size in the AUX record. Consumer has to be able to tell the new data from the old one, for example, by means of time stamps if such are provided in the trace. Consumer is also responsible for disabling any events that might write to the AUX area (thus potentially racing with the consumer) before collecting the data. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Kaixu Xia <kaixu.xia@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Robert Richter <rric@kernel.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: acme@infradead.org Cc: adrian.hunter@intel.com Cc: kan.liang@intel.com Cc: markus.t.metzger@intel.com Cc: mathieu.poirier@linaro.org Link: http://lkml.kernel.org/r/1421237903-181015-9-git-send-email-alexander.shishkin@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-01-14 12:18:17 +00:00
* In overwrite mode, AUX data stores do not depend on aux_tail,
* therefore (A) control dependency barrier does not exist. The
* (B) <-> (C) ordering is still observed by the pmu driver.
perf: Add API for PMUs to write to the AUX area For pmus that wish to write data to ring buffer's AUX area, provide perf_aux_output_{begin,end}() calls to initiate/commit data writes, similarly to perf_output_{begin,end}. These also use the same output handle structure. Also, similarly to software counterparts, these will direct inherited events' output to parents' ring buffers. After the perf_aux_output_begin() returns successfully, handle->size is set to the maximum amount of data that can be written wrt aux_tail pointer, so that no data that the user hasn't seen will be overwritten, therefore this should always be called before hardware writing is enabled. On success, this will return the pointer to pmu driver's private structure allocated for this aux area by pmu::setup_aux. Same pointer can also be retrieved using perf_get_aux() while hardware writing is enabled. PMU driver should pass the actual amount of data written as a parameter to perf_aux_output_end(). All hardware writes should be completed and visible before this one is called. Additionally, perf_aux_output_skip() will adjust output handle and aux_head in case some part of the buffer has to be skipped over to maintain hardware's alignment constraints. Nested writers are forbidden and guards are in place to catch such attempts. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Kaixu Xia <kaixu.xia@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Robert Richter <rric@kernel.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: acme@infradead.org Cc: adrian.hunter@intel.com Cc: kan.liang@intel.com Cc: markus.t.metzger@intel.com Cc: mathieu.poirier@linaro.org Link: http://lkml.kernel.org/r/1421237903-181015-8-git-send-email-alexander.shishkin@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-01-14 12:18:16 +00:00
*/
perf: Support overwrite mode for the AUX area This adds support for overwrite mode in the AUX area, which means "keep collecting data till you're stopped", turning AUX area into a circular buffer, where new data overwrites old data. It does not depend on data buffer's overwrite mode, so that it doesn't lose sideband data that is instrumental for processing AUX data. Overwrite mode is enabled at mapping AUX area read only. Even though aux_tail in the buffer's user page might be user writable, it will be ignored in this mode. A PERF_RECORD_AUX with PERF_AUX_FLAG_OVERWRITE set is written to the perf data stream every time an event writes new data to the AUX area. The pmu driver might not be able to infer the exact beginning of the new data in each snapshot, some drivers will only provide the tail, which is aux_offset + aux_size in the AUX record. Consumer has to be able to tell the new data from the old one, for example, by means of time stamps if such are provided in the trace. Consumer is also responsible for disabling any events that might write to the AUX area (thus potentially racing with the consumer) before collecting the data. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Kaixu Xia <kaixu.xia@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Robert Richter <rric@kernel.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: acme@infradead.org Cc: adrian.hunter@intel.com Cc: kan.liang@intel.com Cc: markus.t.metzger@intel.com Cc: mathieu.poirier@linaro.org Link: http://lkml.kernel.org/r/1421237903-181015-9-git-send-email-alexander.shishkin@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-01-14 12:18:17 +00:00
if (!rb->aux_overwrite) {
aux_tail = ACCESS_ONCE(rb->user_page->aux_tail);
handle->wakeup = local_read(&rb->aux_wakeup) + rb->aux_watermark;
perf: Support overwrite mode for the AUX area This adds support for overwrite mode in the AUX area, which means "keep collecting data till you're stopped", turning AUX area into a circular buffer, where new data overwrites old data. It does not depend on data buffer's overwrite mode, so that it doesn't lose sideband data that is instrumental for processing AUX data. Overwrite mode is enabled at mapping AUX area read only. Even though aux_tail in the buffer's user page might be user writable, it will be ignored in this mode. A PERF_RECORD_AUX with PERF_AUX_FLAG_OVERWRITE set is written to the perf data stream every time an event writes new data to the AUX area. The pmu driver might not be able to infer the exact beginning of the new data in each snapshot, some drivers will only provide the tail, which is aux_offset + aux_size in the AUX record. Consumer has to be able to tell the new data from the old one, for example, by means of time stamps if such are provided in the trace. Consumer is also responsible for disabling any events that might write to the AUX area (thus potentially racing with the consumer) before collecting the data. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Kaixu Xia <kaixu.xia@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Robert Richter <rric@kernel.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: acme@infradead.org Cc: adrian.hunter@intel.com Cc: kan.liang@intel.com Cc: markus.t.metzger@intel.com Cc: mathieu.poirier@linaro.org Link: http://lkml.kernel.org/r/1421237903-181015-9-git-send-email-alexander.shishkin@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-01-14 12:18:17 +00:00
if (aux_head - aux_tail < perf_aux_size(rb))
handle->size = CIRC_SPACE(aux_head, aux_tail, perf_aux_size(rb));
/*
* handle->size computation depends on aux_tail load; this forms a
* control dependency barrier separating aux_tail load from aux data
* store that will be enabled on successful return
*/
if (!handle->size) { /* A, matches D */
event->pending_disable = 1;
perf_output_wakeup(handle);
local_set(&rb->aux_nest, 0);
goto err_put;
}
perf: Add API for PMUs to write to the AUX area For pmus that wish to write data to ring buffer's AUX area, provide perf_aux_output_{begin,end}() calls to initiate/commit data writes, similarly to perf_output_{begin,end}. These also use the same output handle structure. Also, similarly to software counterparts, these will direct inherited events' output to parents' ring buffers. After the perf_aux_output_begin() returns successfully, handle->size is set to the maximum amount of data that can be written wrt aux_tail pointer, so that no data that the user hasn't seen will be overwritten, therefore this should always be called before hardware writing is enabled. On success, this will return the pointer to pmu driver's private structure allocated for this aux area by pmu::setup_aux. Same pointer can also be retrieved using perf_get_aux() while hardware writing is enabled. PMU driver should pass the actual amount of data written as a parameter to perf_aux_output_end(). All hardware writes should be completed and visible before this one is called. Additionally, perf_aux_output_skip() will adjust output handle and aux_head in case some part of the buffer has to be skipped over to maintain hardware's alignment constraints. Nested writers are forbidden and guards are in place to catch such attempts. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Kaixu Xia <kaixu.xia@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Robert Richter <rric@kernel.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: acme@infradead.org Cc: adrian.hunter@intel.com Cc: kan.liang@intel.com Cc: markus.t.metzger@intel.com Cc: mathieu.poirier@linaro.org Link: http://lkml.kernel.org/r/1421237903-181015-8-git-send-email-alexander.shishkin@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-01-14 12:18:16 +00:00
}
return handle->rb->aux_priv;
err_put:
rb_free_aux(rb);
err:
ring_buffer_put(rb);
handle->event = NULL;
return NULL;
}
/*
* Commit the data written by hardware into the ring buffer by adjusting
* aux_head and posting a PERF_RECORD_AUX into the perf buffer. It is the
* pmu driver's responsibility to observe ordering rules of the hardware,
* so that all the data is externally visible before this is called.
*/
void perf_aux_output_end(struct perf_output_handle *handle, unsigned long size,
bool truncated)
{
struct ring_buffer *rb = handle->rb;
perf: Support overwrite mode for the AUX area This adds support for overwrite mode in the AUX area, which means "keep collecting data till you're stopped", turning AUX area into a circular buffer, where new data overwrites old data. It does not depend on data buffer's overwrite mode, so that it doesn't lose sideband data that is instrumental for processing AUX data. Overwrite mode is enabled at mapping AUX area read only. Even though aux_tail in the buffer's user page might be user writable, it will be ignored in this mode. A PERF_RECORD_AUX with PERF_AUX_FLAG_OVERWRITE set is written to the perf data stream every time an event writes new data to the AUX area. The pmu driver might not be able to infer the exact beginning of the new data in each snapshot, some drivers will only provide the tail, which is aux_offset + aux_size in the AUX record. Consumer has to be able to tell the new data from the old one, for example, by means of time stamps if such are provided in the trace. Consumer is also responsible for disabling any events that might write to the AUX area (thus potentially racing with the consumer) before collecting the data. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Kaixu Xia <kaixu.xia@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Robert Richter <rric@kernel.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: acme@infradead.org Cc: adrian.hunter@intel.com Cc: kan.liang@intel.com Cc: markus.t.metzger@intel.com Cc: mathieu.poirier@linaro.org Link: http://lkml.kernel.org/r/1421237903-181015-9-git-send-email-alexander.shishkin@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-01-14 12:18:17 +00:00
unsigned long aux_head;
perf: Add API for PMUs to write to the AUX area For pmus that wish to write data to ring buffer's AUX area, provide perf_aux_output_{begin,end}() calls to initiate/commit data writes, similarly to perf_output_{begin,end}. These also use the same output handle structure. Also, similarly to software counterparts, these will direct inherited events' output to parents' ring buffers. After the perf_aux_output_begin() returns successfully, handle->size is set to the maximum amount of data that can be written wrt aux_tail pointer, so that no data that the user hasn't seen will be overwritten, therefore this should always be called before hardware writing is enabled. On success, this will return the pointer to pmu driver's private structure allocated for this aux area by pmu::setup_aux. Same pointer can also be retrieved using perf_get_aux() while hardware writing is enabled. PMU driver should pass the actual amount of data written as a parameter to perf_aux_output_end(). All hardware writes should be completed and visible before this one is called. Additionally, perf_aux_output_skip() will adjust output handle and aux_head in case some part of the buffer has to be skipped over to maintain hardware's alignment constraints. Nested writers are forbidden and guards are in place to catch such attempts. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Kaixu Xia <kaixu.xia@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Robert Richter <rric@kernel.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: acme@infradead.org Cc: adrian.hunter@intel.com Cc: kan.liang@intel.com Cc: markus.t.metzger@intel.com Cc: mathieu.poirier@linaro.org Link: http://lkml.kernel.org/r/1421237903-181015-8-git-send-email-alexander.shishkin@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-01-14 12:18:16 +00:00
u64 flags = 0;
if (truncated)
flags |= PERF_AUX_FLAG_TRUNCATED;
perf: Support overwrite mode for the AUX area This adds support for overwrite mode in the AUX area, which means "keep collecting data till you're stopped", turning AUX area into a circular buffer, where new data overwrites old data. It does not depend on data buffer's overwrite mode, so that it doesn't lose sideband data that is instrumental for processing AUX data. Overwrite mode is enabled at mapping AUX area read only. Even though aux_tail in the buffer's user page might be user writable, it will be ignored in this mode. A PERF_RECORD_AUX with PERF_AUX_FLAG_OVERWRITE set is written to the perf data stream every time an event writes new data to the AUX area. The pmu driver might not be able to infer the exact beginning of the new data in each snapshot, some drivers will only provide the tail, which is aux_offset + aux_size in the AUX record. Consumer has to be able to tell the new data from the old one, for example, by means of time stamps if such are provided in the trace. Consumer is also responsible for disabling any events that might write to the AUX area (thus potentially racing with the consumer) before collecting the data. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Kaixu Xia <kaixu.xia@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Robert Richter <rric@kernel.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: acme@infradead.org Cc: adrian.hunter@intel.com Cc: kan.liang@intel.com Cc: markus.t.metzger@intel.com Cc: mathieu.poirier@linaro.org Link: http://lkml.kernel.org/r/1421237903-181015-9-git-send-email-alexander.shishkin@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-01-14 12:18:17 +00:00
/* in overwrite mode, driver provides aux_head via handle */
if (rb->aux_overwrite) {
flags |= PERF_AUX_FLAG_OVERWRITE;
aux_head = handle->head;
local_set(&rb->aux_head, aux_head);
} else {
aux_head = local_read(&rb->aux_head);
local_add(size, &rb->aux_head);
}
perf: Add API for PMUs to write to the AUX area For pmus that wish to write data to ring buffer's AUX area, provide perf_aux_output_{begin,end}() calls to initiate/commit data writes, similarly to perf_output_{begin,end}. These also use the same output handle structure. Also, similarly to software counterparts, these will direct inherited events' output to parents' ring buffers. After the perf_aux_output_begin() returns successfully, handle->size is set to the maximum amount of data that can be written wrt aux_tail pointer, so that no data that the user hasn't seen will be overwritten, therefore this should always be called before hardware writing is enabled. On success, this will return the pointer to pmu driver's private structure allocated for this aux area by pmu::setup_aux. Same pointer can also be retrieved using perf_get_aux() while hardware writing is enabled. PMU driver should pass the actual amount of data written as a parameter to perf_aux_output_end(). All hardware writes should be completed and visible before this one is called. Additionally, perf_aux_output_skip() will adjust output handle and aux_head in case some part of the buffer has to be skipped over to maintain hardware's alignment constraints. Nested writers are forbidden and guards are in place to catch such attempts. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Kaixu Xia <kaixu.xia@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Robert Richter <rric@kernel.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: acme@infradead.org Cc: adrian.hunter@intel.com Cc: kan.liang@intel.com Cc: markus.t.metzger@intel.com Cc: mathieu.poirier@linaro.org Link: http://lkml.kernel.org/r/1421237903-181015-8-git-send-email-alexander.shishkin@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-01-14 12:18:16 +00:00
if (size || flags) {
/*
* Only send RECORD_AUX if we have something useful to communicate
*/
perf_event_aux_event(handle->event, aux_head, size, flags);
}
aux_head = rb->user_page->aux_head = local_read(&rb->aux_head);
perf: Add API for PMUs to write to the AUX area For pmus that wish to write data to ring buffer's AUX area, provide perf_aux_output_{begin,end}() calls to initiate/commit data writes, similarly to perf_output_{begin,end}. These also use the same output handle structure. Also, similarly to software counterparts, these will direct inherited events' output to parents' ring buffers. After the perf_aux_output_begin() returns successfully, handle->size is set to the maximum amount of data that can be written wrt aux_tail pointer, so that no data that the user hasn't seen will be overwritten, therefore this should always be called before hardware writing is enabled. On success, this will return the pointer to pmu driver's private structure allocated for this aux area by pmu::setup_aux. Same pointer can also be retrieved using perf_get_aux() while hardware writing is enabled. PMU driver should pass the actual amount of data written as a parameter to perf_aux_output_end(). All hardware writes should be completed and visible before this one is called. Additionally, perf_aux_output_skip() will adjust output handle and aux_head in case some part of the buffer has to be skipped over to maintain hardware's alignment constraints. Nested writers are forbidden and guards are in place to catch such attempts. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Kaixu Xia <kaixu.xia@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Robert Richter <rric@kernel.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: acme@infradead.org Cc: adrian.hunter@intel.com Cc: kan.liang@intel.com Cc: markus.t.metzger@intel.com Cc: mathieu.poirier@linaro.org Link: http://lkml.kernel.org/r/1421237903-181015-8-git-send-email-alexander.shishkin@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-01-14 12:18:16 +00:00
if (aux_head - local_read(&rb->aux_wakeup) >= rb->aux_watermark) {
perf_output_wakeup(handle);
local_add(rb->aux_watermark, &rb->aux_wakeup);
}
perf: Add API for PMUs to write to the AUX area For pmus that wish to write data to ring buffer's AUX area, provide perf_aux_output_{begin,end}() calls to initiate/commit data writes, similarly to perf_output_{begin,end}. These also use the same output handle structure. Also, similarly to software counterparts, these will direct inherited events' output to parents' ring buffers. After the perf_aux_output_begin() returns successfully, handle->size is set to the maximum amount of data that can be written wrt aux_tail pointer, so that no data that the user hasn't seen will be overwritten, therefore this should always be called before hardware writing is enabled. On success, this will return the pointer to pmu driver's private structure allocated for this aux area by pmu::setup_aux. Same pointer can also be retrieved using perf_get_aux() while hardware writing is enabled. PMU driver should pass the actual amount of data written as a parameter to perf_aux_output_end(). All hardware writes should be completed and visible before this one is called. Additionally, perf_aux_output_skip() will adjust output handle and aux_head in case some part of the buffer has to be skipped over to maintain hardware's alignment constraints. Nested writers are forbidden and guards are in place to catch such attempts. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Kaixu Xia <kaixu.xia@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Robert Richter <rric@kernel.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: acme@infradead.org Cc: adrian.hunter@intel.com Cc: kan.liang@intel.com Cc: markus.t.metzger@intel.com Cc: mathieu.poirier@linaro.org Link: http://lkml.kernel.org/r/1421237903-181015-8-git-send-email-alexander.shishkin@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-01-14 12:18:16 +00:00
handle->event = NULL;
local_set(&rb->aux_nest, 0);
rb_free_aux(rb);
ring_buffer_put(rb);
}
/*
* Skip over a given number of bytes in the AUX buffer, due to, for example,
* hardware's alignment constraints.
*/
int perf_aux_output_skip(struct perf_output_handle *handle, unsigned long size)
{
struct ring_buffer *rb = handle->rb;
unsigned long aux_head;
if (size > handle->size)
return -ENOSPC;
local_add(size, &rb->aux_head);
aux_head = rb->user_page->aux_head = local_read(&rb->aux_head);
if (aux_head - local_read(&rb->aux_wakeup) >= rb->aux_watermark) {
perf_output_wakeup(handle);
local_add(rb->aux_watermark, &rb->aux_wakeup);
handle->wakeup = local_read(&rb->aux_wakeup) +
rb->aux_watermark;
}
perf: Add API for PMUs to write to the AUX area For pmus that wish to write data to ring buffer's AUX area, provide perf_aux_output_{begin,end}() calls to initiate/commit data writes, similarly to perf_output_{begin,end}. These also use the same output handle structure. Also, similarly to software counterparts, these will direct inherited events' output to parents' ring buffers. After the perf_aux_output_begin() returns successfully, handle->size is set to the maximum amount of data that can be written wrt aux_tail pointer, so that no data that the user hasn't seen will be overwritten, therefore this should always be called before hardware writing is enabled. On success, this will return the pointer to pmu driver's private structure allocated for this aux area by pmu::setup_aux. Same pointer can also be retrieved using perf_get_aux() while hardware writing is enabled. PMU driver should pass the actual amount of data written as a parameter to perf_aux_output_end(). All hardware writes should be completed and visible before this one is called. Additionally, perf_aux_output_skip() will adjust output handle and aux_head in case some part of the buffer has to be skipped over to maintain hardware's alignment constraints. Nested writers are forbidden and guards are in place to catch such attempts. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Kaixu Xia <kaixu.xia@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Robert Richter <rric@kernel.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: acme@infradead.org Cc: adrian.hunter@intel.com Cc: kan.liang@intel.com Cc: markus.t.metzger@intel.com Cc: mathieu.poirier@linaro.org Link: http://lkml.kernel.org/r/1421237903-181015-8-git-send-email-alexander.shishkin@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-01-14 12:18:16 +00:00
handle->head = aux_head;
handle->size -= size;
return 0;
}
void *perf_get_aux(struct perf_output_handle *handle)
{
/* this is only valid between perf_aux_output_begin and *_end */
if (!handle->event)
return NULL;
return handle->rb->aux_priv;
}
#define PERF_AUX_GFP (GFP_KERNEL | __GFP_ZERO | __GFP_NOWARN | __GFP_NORETRY)
static struct page *rb_alloc_aux_page(int node, int order)
{
struct page *page;
if (order > MAX_ORDER)
order = MAX_ORDER;
do {
page = alloc_pages_node(node, PERF_AUX_GFP, order);
} while (!page && order--);
if (page && order) {
/*
* Communicate the allocation size to the driver
*/
split_page(page, order);
SetPagePrivate(page);
set_page_private(page, order);
}
return page;
}
static void rb_free_aux_page(struct ring_buffer *rb, int idx)
{
struct page *page = virt_to_page(rb->aux_pages[idx]);
ClearPagePrivate(page);
page->mapping = NULL;
__free_page(page);
}
perf: Add AUX area to ring buffer for raw data streams This patch introduces "AUX space" in the perf mmap buffer, intended for exporting high bandwidth data streams to userspace, such as instruction flow traces. AUX space is a ring buffer, defined by aux_{offset,size} fields in the user_page structure, and read/write pointers aux_{head,tail}, which abide by the same rules as data_* counterparts of the main perf buffer. In order to allocate/mmap AUX, userspace needs to set up aux_offset to such an offset that will be greater than data_offset+data_size and aux_size to be the desired buffer size. Both need to be page aligned. Then, same aux_offset and aux_size should be passed to mmap() call and if everything adds up, you should have an AUX buffer as a result. Pages that are mapped into this buffer also come out of user's mlock rlimit plus perf_event_mlock_kb allowance. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Kaixu Xia <kaixu.xia@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Robert Richter <rric@kernel.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: acme@infradead.org Cc: adrian.hunter@intel.com Cc: kan.liang@intel.com Cc: markus.t.metzger@intel.com Cc: mathieu.poirier@linaro.org Link: http://lkml.kernel.org/r/1421237903-181015-3-git-send-email-alexander.shishkin@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-01-14 12:18:11 +00:00
int rb_alloc_aux(struct ring_buffer *rb, struct perf_event *event,
pgoff_t pgoff, int nr_pages, long watermark, int flags)
perf: Add AUX area to ring buffer for raw data streams This patch introduces "AUX space" in the perf mmap buffer, intended for exporting high bandwidth data streams to userspace, such as instruction flow traces. AUX space is a ring buffer, defined by aux_{offset,size} fields in the user_page structure, and read/write pointers aux_{head,tail}, which abide by the same rules as data_* counterparts of the main perf buffer. In order to allocate/mmap AUX, userspace needs to set up aux_offset to such an offset that will be greater than data_offset+data_size and aux_size to be the desired buffer size. Both need to be page aligned. Then, same aux_offset and aux_size should be passed to mmap() call and if everything adds up, you should have an AUX buffer as a result. Pages that are mapped into this buffer also come out of user's mlock rlimit plus perf_event_mlock_kb allowance. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Kaixu Xia <kaixu.xia@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Robert Richter <rric@kernel.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: acme@infradead.org Cc: adrian.hunter@intel.com Cc: kan.liang@intel.com Cc: markus.t.metzger@intel.com Cc: mathieu.poirier@linaro.org Link: http://lkml.kernel.org/r/1421237903-181015-3-git-send-email-alexander.shishkin@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-01-14 12:18:11 +00:00
{
bool overwrite = !(flags & RING_BUFFER_WRITABLE);
int node = (event->cpu == -1) ? -1 : cpu_to_node(event->cpu);
int ret = -ENOMEM, max_order = 0;
perf: Add AUX area to ring buffer for raw data streams This patch introduces "AUX space" in the perf mmap buffer, intended for exporting high bandwidth data streams to userspace, such as instruction flow traces. AUX space is a ring buffer, defined by aux_{offset,size} fields in the user_page structure, and read/write pointers aux_{head,tail}, which abide by the same rules as data_* counterparts of the main perf buffer. In order to allocate/mmap AUX, userspace needs to set up aux_offset to such an offset that will be greater than data_offset+data_size and aux_size to be the desired buffer size. Both need to be page aligned. Then, same aux_offset and aux_size should be passed to mmap() call and if everything adds up, you should have an AUX buffer as a result. Pages that are mapped into this buffer also come out of user's mlock rlimit plus perf_event_mlock_kb allowance. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Kaixu Xia <kaixu.xia@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Robert Richter <rric@kernel.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: acme@infradead.org Cc: adrian.hunter@intel.com Cc: kan.liang@intel.com Cc: markus.t.metzger@intel.com Cc: mathieu.poirier@linaro.org Link: http://lkml.kernel.org/r/1421237903-181015-3-git-send-email-alexander.shishkin@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-01-14 12:18:11 +00:00
if (!has_aux(event))
return -ENOTSUPP;
perf: Add a capability for AUX_NO_SG pmus to do software double buffering For pmus that don't support scatter-gather for AUX data in hardware, it might still make sense to implement software double buffering to avoid losing data while the user is reading data out. For this purpose, add a pmu capability that guarantees multiple high-order chunks for AUX buffer, so that the pmu driver can do switchover tricks. To make use of this feature, add PERF_PMU_CAP_AUX_SW_DOUBLEBUF to your pmu's capability mask. This will make the ring buffer AUX allocation code ensure that the biggest high order allocation for the aux buffer pages is no bigger than half of the total requested buffer size, thus making sure that the buffer has at least two high order allocations. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Kaixu Xia <kaixu.xia@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Robert Richter <rric@kernel.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: acme@infradead.org Cc: adrian.hunter@intel.com Cc: kan.liang@intel.com Cc: markus.t.metzger@intel.com Cc: mathieu.poirier@linaro.org Link: http://lkml.kernel.org/r/1421237903-181015-5-git-send-email-alexander.shishkin@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-01-14 12:18:13 +00:00
if (event->pmu->capabilities & PERF_PMU_CAP_AUX_NO_SG) {
/*
* We need to start with the max_order that fits in nr_pages,
* not the other way around, hence ilog2() and not get_order.
*/
max_order = ilog2(nr_pages);
perf: Add a capability for AUX_NO_SG pmus to do software double buffering For pmus that don't support scatter-gather for AUX data in hardware, it might still make sense to implement software double buffering to avoid losing data while the user is reading data out. For this purpose, add a pmu capability that guarantees multiple high-order chunks for AUX buffer, so that the pmu driver can do switchover tricks. To make use of this feature, add PERF_PMU_CAP_AUX_SW_DOUBLEBUF to your pmu's capability mask. This will make the ring buffer AUX allocation code ensure that the biggest high order allocation for the aux buffer pages is no bigger than half of the total requested buffer size, thus making sure that the buffer has at least two high order allocations. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Kaixu Xia <kaixu.xia@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Robert Richter <rric@kernel.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: acme@infradead.org Cc: adrian.hunter@intel.com Cc: kan.liang@intel.com Cc: markus.t.metzger@intel.com Cc: mathieu.poirier@linaro.org Link: http://lkml.kernel.org/r/1421237903-181015-5-git-send-email-alexander.shishkin@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-01-14 12:18:13 +00:00
/*
* PMU requests more than one contiguous chunks of memory
* for SW double buffering
*/
if ((event->pmu->capabilities & PERF_PMU_CAP_AUX_SW_DOUBLEBUF) &&
!overwrite) {
if (!max_order)
return -EINVAL;
max_order--;
}
}
perf: Add AUX area to ring buffer for raw data streams This patch introduces "AUX space" in the perf mmap buffer, intended for exporting high bandwidth data streams to userspace, such as instruction flow traces. AUX space is a ring buffer, defined by aux_{offset,size} fields in the user_page structure, and read/write pointers aux_{head,tail}, which abide by the same rules as data_* counterparts of the main perf buffer. In order to allocate/mmap AUX, userspace needs to set up aux_offset to such an offset that will be greater than data_offset+data_size and aux_size to be the desired buffer size. Both need to be page aligned. Then, same aux_offset and aux_size should be passed to mmap() call and if everything adds up, you should have an AUX buffer as a result. Pages that are mapped into this buffer also come out of user's mlock rlimit plus perf_event_mlock_kb allowance. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Kaixu Xia <kaixu.xia@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Robert Richter <rric@kernel.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: acme@infradead.org Cc: adrian.hunter@intel.com Cc: kan.liang@intel.com Cc: markus.t.metzger@intel.com Cc: mathieu.poirier@linaro.org Link: http://lkml.kernel.org/r/1421237903-181015-3-git-send-email-alexander.shishkin@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-01-14 12:18:11 +00:00
rb->aux_pages = kzalloc_node(nr_pages * sizeof(void *), GFP_KERNEL, node);
if (!rb->aux_pages)
return -ENOMEM;
rb->free_aux = event->pmu->free_aux;
for (rb->aux_nr_pages = 0; rb->aux_nr_pages < nr_pages;) {
perf: Add AUX area to ring buffer for raw data streams This patch introduces "AUX space" in the perf mmap buffer, intended for exporting high bandwidth data streams to userspace, such as instruction flow traces. AUX space is a ring buffer, defined by aux_{offset,size} fields in the user_page structure, and read/write pointers aux_{head,tail}, which abide by the same rules as data_* counterparts of the main perf buffer. In order to allocate/mmap AUX, userspace needs to set up aux_offset to such an offset that will be greater than data_offset+data_size and aux_size to be the desired buffer size. Both need to be page aligned. Then, same aux_offset and aux_size should be passed to mmap() call and if everything adds up, you should have an AUX buffer as a result. Pages that are mapped into this buffer also come out of user's mlock rlimit plus perf_event_mlock_kb allowance. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Kaixu Xia <kaixu.xia@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Robert Richter <rric@kernel.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: acme@infradead.org Cc: adrian.hunter@intel.com Cc: kan.liang@intel.com Cc: markus.t.metzger@intel.com Cc: mathieu.poirier@linaro.org Link: http://lkml.kernel.org/r/1421237903-181015-3-git-send-email-alexander.shishkin@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-01-14 12:18:11 +00:00
struct page *page;
int last, order;
perf: Add AUX area to ring buffer for raw data streams This patch introduces "AUX space" in the perf mmap buffer, intended for exporting high bandwidth data streams to userspace, such as instruction flow traces. AUX space is a ring buffer, defined by aux_{offset,size} fields in the user_page structure, and read/write pointers aux_{head,tail}, which abide by the same rules as data_* counterparts of the main perf buffer. In order to allocate/mmap AUX, userspace needs to set up aux_offset to such an offset that will be greater than data_offset+data_size and aux_size to be the desired buffer size. Both need to be page aligned. Then, same aux_offset and aux_size should be passed to mmap() call and if everything adds up, you should have an AUX buffer as a result. Pages that are mapped into this buffer also come out of user's mlock rlimit plus perf_event_mlock_kb allowance. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Kaixu Xia <kaixu.xia@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Robert Richter <rric@kernel.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: acme@infradead.org Cc: adrian.hunter@intel.com Cc: kan.liang@intel.com Cc: markus.t.metzger@intel.com Cc: mathieu.poirier@linaro.org Link: http://lkml.kernel.org/r/1421237903-181015-3-git-send-email-alexander.shishkin@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-01-14 12:18:11 +00:00
order = min(max_order, ilog2(nr_pages - rb->aux_nr_pages));
page = rb_alloc_aux_page(node, order);
perf: Add AUX area to ring buffer for raw data streams This patch introduces "AUX space" in the perf mmap buffer, intended for exporting high bandwidth data streams to userspace, such as instruction flow traces. AUX space is a ring buffer, defined by aux_{offset,size} fields in the user_page structure, and read/write pointers aux_{head,tail}, which abide by the same rules as data_* counterparts of the main perf buffer. In order to allocate/mmap AUX, userspace needs to set up aux_offset to such an offset that will be greater than data_offset+data_size and aux_size to be the desired buffer size. Both need to be page aligned. Then, same aux_offset and aux_size should be passed to mmap() call and if everything adds up, you should have an AUX buffer as a result. Pages that are mapped into this buffer also come out of user's mlock rlimit plus perf_event_mlock_kb allowance. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Kaixu Xia <kaixu.xia@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Robert Richter <rric@kernel.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: acme@infradead.org Cc: adrian.hunter@intel.com Cc: kan.liang@intel.com Cc: markus.t.metzger@intel.com Cc: mathieu.poirier@linaro.org Link: http://lkml.kernel.org/r/1421237903-181015-3-git-send-email-alexander.shishkin@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-01-14 12:18:11 +00:00
if (!page)
goto out;
for (last = rb->aux_nr_pages + (1 << page_private(page));
last > rb->aux_nr_pages; rb->aux_nr_pages++)
rb->aux_pages[rb->aux_nr_pages] = page_address(page++);
perf: Add AUX area to ring buffer for raw data streams This patch introduces "AUX space" in the perf mmap buffer, intended for exporting high bandwidth data streams to userspace, such as instruction flow traces. AUX space is a ring buffer, defined by aux_{offset,size} fields in the user_page structure, and read/write pointers aux_{head,tail}, which abide by the same rules as data_* counterparts of the main perf buffer. In order to allocate/mmap AUX, userspace needs to set up aux_offset to such an offset that will be greater than data_offset+data_size and aux_size to be the desired buffer size. Both need to be page aligned. Then, same aux_offset and aux_size should be passed to mmap() call and if everything adds up, you should have an AUX buffer as a result. Pages that are mapped into this buffer also come out of user's mlock rlimit plus perf_event_mlock_kb allowance. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Kaixu Xia <kaixu.xia@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Robert Richter <rric@kernel.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: acme@infradead.org Cc: adrian.hunter@intel.com Cc: kan.liang@intel.com Cc: markus.t.metzger@intel.com Cc: mathieu.poirier@linaro.org Link: http://lkml.kernel.org/r/1421237903-181015-3-git-send-email-alexander.shishkin@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-01-14 12:18:11 +00:00
}
/*
* In overwrite mode, PMUs that don't support SG may not handle more
* than one contiguous allocation, since they rely on PMI to do double
* buffering. In this case, the entire buffer has to be one contiguous
* chunk.
*/
if ((event->pmu->capabilities & PERF_PMU_CAP_AUX_NO_SG) &&
overwrite) {
struct page *page = virt_to_page(rb->aux_pages[0]);
if (page_private(page) != max_order)
goto out;
}
perf: Add AUX area to ring buffer for raw data streams This patch introduces "AUX space" in the perf mmap buffer, intended for exporting high bandwidth data streams to userspace, such as instruction flow traces. AUX space is a ring buffer, defined by aux_{offset,size} fields in the user_page structure, and read/write pointers aux_{head,tail}, which abide by the same rules as data_* counterparts of the main perf buffer. In order to allocate/mmap AUX, userspace needs to set up aux_offset to such an offset that will be greater than data_offset+data_size and aux_size to be the desired buffer size. Both need to be page aligned. Then, same aux_offset and aux_size should be passed to mmap() call and if everything adds up, you should have an AUX buffer as a result. Pages that are mapped into this buffer also come out of user's mlock rlimit plus perf_event_mlock_kb allowance. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Kaixu Xia <kaixu.xia@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Robert Richter <rric@kernel.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: acme@infradead.org Cc: adrian.hunter@intel.com Cc: kan.liang@intel.com Cc: markus.t.metzger@intel.com Cc: mathieu.poirier@linaro.org Link: http://lkml.kernel.org/r/1421237903-181015-3-git-send-email-alexander.shishkin@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-01-14 12:18:11 +00:00
rb->aux_priv = event->pmu->setup_aux(event->cpu, rb->aux_pages, nr_pages,
overwrite);
if (!rb->aux_priv)
goto out;
ret = 0;
/*
* aux_pages (and pmu driver's private data, aux_priv) will be
* referenced in both producer's and consumer's contexts, thus
* we keep a refcount here to make sure either of the two can
* reference them safely.
*/
atomic_set(&rb->aux_refcount, 1);
perf: Support overwrite mode for the AUX area This adds support for overwrite mode in the AUX area, which means "keep collecting data till you're stopped", turning AUX area into a circular buffer, where new data overwrites old data. It does not depend on data buffer's overwrite mode, so that it doesn't lose sideband data that is instrumental for processing AUX data. Overwrite mode is enabled at mapping AUX area read only. Even though aux_tail in the buffer's user page might be user writable, it will be ignored in this mode. A PERF_RECORD_AUX with PERF_AUX_FLAG_OVERWRITE set is written to the perf data stream every time an event writes new data to the AUX area. The pmu driver might not be able to infer the exact beginning of the new data in each snapshot, some drivers will only provide the tail, which is aux_offset + aux_size in the AUX record. Consumer has to be able to tell the new data from the old one, for example, by means of time stamps if such are provided in the trace. Consumer is also responsible for disabling any events that might write to the AUX area (thus potentially racing with the consumer) before collecting the data. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Kaixu Xia <kaixu.xia@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Robert Richter <rric@kernel.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: acme@infradead.org Cc: adrian.hunter@intel.com Cc: kan.liang@intel.com Cc: markus.t.metzger@intel.com Cc: mathieu.poirier@linaro.org Link: http://lkml.kernel.org/r/1421237903-181015-9-git-send-email-alexander.shishkin@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-01-14 12:18:17 +00:00
rb->aux_overwrite = overwrite;
rb->aux_watermark = watermark;
if (!rb->aux_watermark && !rb->aux_overwrite)
rb->aux_watermark = nr_pages << (PAGE_SHIFT - 1);
perf: Support overwrite mode for the AUX area This adds support for overwrite mode in the AUX area, which means "keep collecting data till you're stopped", turning AUX area into a circular buffer, where new data overwrites old data. It does not depend on data buffer's overwrite mode, so that it doesn't lose sideband data that is instrumental for processing AUX data. Overwrite mode is enabled at mapping AUX area read only. Even though aux_tail in the buffer's user page might be user writable, it will be ignored in this mode. A PERF_RECORD_AUX with PERF_AUX_FLAG_OVERWRITE set is written to the perf data stream every time an event writes new data to the AUX area. The pmu driver might not be able to infer the exact beginning of the new data in each snapshot, some drivers will only provide the tail, which is aux_offset + aux_size in the AUX record. Consumer has to be able to tell the new data from the old one, for example, by means of time stamps if such are provided in the trace. Consumer is also responsible for disabling any events that might write to the AUX area (thus potentially racing with the consumer) before collecting the data. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Kaixu Xia <kaixu.xia@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Robert Richter <rric@kernel.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: acme@infradead.org Cc: adrian.hunter@intel.com Cc: kan.liang@intel.com Cc: markus.t.metzger@intel.com Cc: mathieu.poirier@linaro.org Link: http://lkml.kernel.org/r/1421237903-181015-9-git-send-email-alexander.shishkin@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-01-14 12:18:17 +00:00
perf: Add AUX area to ring buffer for raw data streams This patch introduces "AUX space" in the perf mmap buffer, intended for exporting high bandwidth data streams to userspace, such as instruction flow traces. AUX space is a ring buffer, defined by aux_{offset,size} fields in the user_page structure, and read/write pointers aux_{head,tail}, which abide by the same rules as data_* counterparts of the main perf buffer. In order to allocate/mmap AUX, userspace needs to set up aux_offset to such an offset that will be greater than data_offset+data_size and aux_size to be the desired buffer size. Both need to be page aligned. Then, same aux_offset and aux_size should be passed to mmap() call and if everything adds up, you should have an AUX buffer as a result. Pages that are mapped into this buffer also come out of user's mlock rlimit plus perf_event_mlock_kb allowance. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Kaixu Xia <kaixu.xia@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Robert Richter <rric@kernel.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: acme@infradead.org Cc: adrian.hunter@intel.com Cc: kan.liang@intel.com Cc: markus.t.metzger@intel.com Cc: mathieu.poirier@linaro.org Link: http://lkml.kernel.org/r/1421237903-181015-3-git-send-email-alexander.shishkin@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-01-14 12:18:11 +00:00
out:
if (!ret)
rb->aux_pgoff = pgoff;
else
rb_free_aux(rb);
return ret;
}
static void __rb_free_aux(struct ring_buffer *rb)
{
int pg;
if (rb->aux_priv) {
rb->free_aux(rb->aux_priv);
rb->free_aux = NULL;
rb->aux_priv = NULL;
}
for (pg = 0; pg < rb->aux_nr_pages; pg++)
rb_free_aux_page(rb, pg);
perf: Add AUX area to ring buffer for raw data streams This patch introduces "AUX space" in the perf mmap buffer, intended for exporting high bandwidth data streams to userspace, such as instruction flow traces. AUX space is a ring buffer, defined by aux_{offset,size} fields in the user_page structure, and read/write pointers aux_{head,tail}, which abide by the same rules as data_* counterparts of the main perf buffer. In order to allocate/mmap AUX, userspace needs to set up aux_offset to such an offset that will be greater than data_offset+data_size and aux_size to be the desired buffer size. Both need to be page aligned. Then, same aux_offset and aux_size should be passed to mmap() call and if everything adds up, you should have an AUX buffer as a result. Pages that are mapped into this buffer also come out of user's mlock rlimit plus perf_event_mlock_kb allowance. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Kaixu Xia <kaixu.xia@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Robert Richter <rric@kernel.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: acme@infradead.org Cc: adrian.hunter@intel.com Cc: kan.liang@intel.com Cc: markus.t.metzger@intel.com Cc: mathieu.poirier@linaro.org Link: http://lkml.kernel.org/r/1421237903-181015-3-git-send-email-alexander.shishkin@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-01-14 12:18:11 +00:00
kfree(rb->aux_pages);
rb->aux_nr_pages = 0;
}
void rb_free_aux(struct ring_buffer *rb)
{
if (atomic_dec_and_test(&rb->aux_refcount))
__rb_free_aux(rb);
}
#ifndef CONFIG_PERF_USE_VMALLOC
/*
* Back perf_mmap() with regular GFP_KERNEL-0 pages.
*/
perf: Add AUX area to ring buffer for raw data streams This patch introduces "AUX space" in the perf mmap buffer, intended for exporting high bandwidth data streams to userspace, such as instruction flow traces. AUX space is a ring buffer, defined by aux_{offset,size} fields in the user_page structure, and read/write pointers aux_{head,tail}, which abide by the same rules as data_* counterparts of the main perf buffer. In order to allocate/mmap AUX, userspace needs to set up aux_offset to such an offset that will be greater than data_offset+data_size and aux_size to be the desired buffer size. Both need to be page aligned. Then, same aux_offset and aux_size should be passed to mmap() call and if everything adds up, you should have an AUX buffer as a result. Pages that are mapped into this buffer also come out of user's mlock rlimit plus perf_event_mlock_kb allowance. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Kaixu Xia <kaixu.xia@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Robert Richter <rric@kernel.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: acme@infradead.org Cc: adrian.hunter@intel.com Cc: kan.liang@intel.com Cc: markus.t.metzger@intel.com Cc: mathieu.poirier@linaro.org Link: http://lkml.kernel.org/r/1421237903-181015-3-git-send-email-alexander.shishkin@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-01-14 12:18:11 +00:00
static struct page *
__perf_mmap_to_page(struct ring_buffer *rb, unsigned long pgoff)
{
if (pgoff > rb->nr_pages)
return NULL;
if (pgoff == 0)
return virt_to_page(rb->user_page);
return virt_to_page(rb->data_pages[pgoff - 1]);
}
static void *perf_mmap_alloc_page(int cpu)
{
struct page *page;
int node;
node = (cpu == -1) ? cpu : cpu_to_node(cpu);
page = alloc_pages_node(node, GFP_KERNEL | __GFP_ZERO, 0);
if (!page)
return NULL;
return page_address(page);
}
struct ring_buffer *rb_alloc(int nr_pages, long watermark, int cpu, int flags)
{
struct ring_buffer *rb;
unsigned long size;
int i;
size = sizeof(struct ring_buffer);
size += nr_pages * sizeof(void *);
rb = kzalloc(size, GFP_KERNEL);
if (!rb)
goto fail;
rb->user_page = perf_mmap_alloc_page(cpu);
if (!rb->user_page)
goto fail_user_page;
for (i = 0; i < nr_pages; i++) {
rb->data_pages[i] = perf_mmap_alloc_page(cpu);
if (!rb->data_pages[i])
goto fail_data_pages;
}
rb->nr_pages = nr_pages;
ring_buffer_init(rb, watermark, flags);
return rb;
fail_data_pages:
for (i--; i >= 0; i--)
free_page((unsigned long)rb->data_pages[i]);
free_page((unsigned long)rb->user_page);
fail_user_page:
kfree(rb);
fail:
return NULL;
}
static void perf_mmap_free_page(unsigned long addr)
{
struct page *page = virt_to_page((void *)addr);
page->mapping = NULL;
__free_page(page);
}
void rb_free(struct ring_buffer *rb)
{
int i;
perf_mmap_free_page((unsigned long)rb->user_page);
for (i = 0; i < rb->nr_pages; i++)
perf_mmap_free_page((unsigned long)rb->data_pages[i]);
kfree(rb);
}
#else
static int data_page_nr(struct ring_buffer *rb)
{
return rb->nr_pages << page_order(rb);
}
perf: Add AUX area to ring buffer for raw data streams This patch introduces "AUX space" in the perf mmap buffer, intended for exporting high bandwidth data streams to userspace, such as instruction flow traces. AUX space is a ring buffer, defined by aux_{offset,size} fields in the user_page structure, and read/write pointers aux_{head,tail}, which abide by the same rules as data_* counterparts of the main perf buffer. In order to allocate/mmap AUX, userspace needs to set up aux_offset to such an offset that will be greater than data_offset+data_size and aux_size to be the desired buffer size. Both need to be page aligned. Then, same aux_offset and aux_size should be passed to mmap() call and if everything adds up, you should have an AUX buffer as a result. Pages that are mapped into this buffer also come out of user's mlock rlimit plus perf_event_mlock_kb allowance. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Kaixu Xia <kaixu.xia@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Robert Richter <rric@kernel.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: acme@infradead.org Cc: adrian.hunter@intel.com Cc: kan.liang@intel.com Cc: markus.t.metzger@intel.com Cc: mathieu.poirier@linaro.org Link: http://lkml.kernel.org/r/1421237903-181015-3-git-send-email-alexander.shishkin@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-01-14 12:18:11 +00:00
static struct page *
__perf_mmap_to_page(struct ring_buffer *rb, unsigned long pgoff)
{
/* The '>' counts in the user page. */
if (pgoff > data_page_nr(rb))
return NULL;
return vmalloc_to_page((void *)rb->user_page + pgoff * PAGE_SIZE);
}
static void perf_mmap_unmark_page(void *addr)
{
struct page *page = vmalloc_to_page(addr);
page->mapping = NULL;
}
static void rb_free_work(struct work_struct *work)
{
struct ring_buffer *rb;
void *base;
int i, nr;
rb = container_of(work, struct ring_buffer, work);
nr = data_page_nr(rb);
base = rb->user_page;
/* The '<=' counts in the user page. */
for (i = 0; i <= nr; i++)
perf_mmap_unmark_page(base + (i * PAGE_SIZE));
vfree(base);
kfree(rb);
}
void rb_free(struct ring_buffer *rb)
{
schedule_work(&rb->work);
}
struct ring_buffer *rb_alloc(int nr_pages, long watermark, int cpu, int flags)
{
struct ring_buffer *rb;
unsigned long size;
void *all_buf;
size = sizeof(struct ring_buffer);
size += sizeof(void *);
rb = kzalloc(size, GFP_KERNEL);
if (!rb)
goto fail;
INIT_WORK(&rb->work, rb_free_work);
all_buf = vmalloc_user((nr_pages + 1) * PAGE_SIZE);
if (!all_buf)
goto fail_all_buf;
rb->user_page = all_buf;
rb->data_pages[0] = all_buf + PAGE_SIZE;
rb->page_order = ilog2(nr_pages);
rb->nr_pages = !!nr_pages;
ring_buffer_init(rb, watermark, flags);
return rb;
fail_all_buf:
kfree(rb);
fail:
return NULL;
}
#endif
perf: Add AUX area to ring buffer for raw data streams This patch introduces "AUX space" in the perf mmap buffer, intended for exporting high bandwidth data streams to userspace, such as instruction flow traces. AUX space is a ring buffer, defined by aux_{offset,size} fields in the user_page structure, and read/write pointers aux_{head,tail}, which abide by the same rules as data_* counterparts of the main perf buffer. In order to allocate/mmap AUX, userspace needs to set up aux_offset to such an offset that will be greater than data_offset+data_size and aux_size to be the desired buffer size. Both need to be page aligned. Then, same aux_offset and aux_size should be passed to mmap() call and if everything adds up, you should have an AUX buffer as a result. Pages that are mapped into this buffer also come out of user's mlock rlimit plus perf_event_mlock_kb allowance. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Kaixu Xia <kaixu.xia@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Robert Richter <rric@kernel.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: acme@infradead.org Cc: adrian.hunter@intel.com Cc: kan.liang@intel.com Cc: markus.t.metzger@intel.com Cc: mathieu.poirier@linaro.org Link: http://lkml.kernel.org/r/1421237903-181015-3-git-send-email-alexander.shishkin@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-01-14 12:18:11 +00:00
struct page *
perf_mmap_to_page(struct ring_buffer *rb, unsigned long pgoff)
{
if (rb->aux_nr_pages) {
/* above AUX space */
if (pgoff > rb->aux_pgoff + rb->aux_nr_pages)
return NULL;
/* AUX space */
if (pgoff >= rb->aux_pgoff)
return virt_to_page(rb->aux_pages[pgoff - rb->aux_pgoff]);
}
return __perf_mmap_to_page(rb, pgoff);
}