linux/drivers/gpu/drm/drm_pci.c

318 lines
8.3 KiB
C
Raw Normal View History

/*
* Copyright 2003 José Fonseca.
* Copyright 2003 Leif Delgass.
* All Rights Reserved.
*
* Permission is hereby granted, free of charge, to any person obtaining a
* copy of this software and associated documentation files (the "Software"),
* to deal in the Software without restriction, including without limitation
* the rights to use, copy, modify, merge, publish, distribute, sublicense,
* and/or sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice (including the next
* paragraph) shall be included in all copies or substantial portions of the
* Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
* AUTHORS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
* ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION
* WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
*/
#include <linux/dma-mapping.h>
#include <linux/export.h>
#include <linux/pci.h>
#include <linux/slab.h>
#include <drm/drm.h>
#include <drm/drm_agpsupport.h>
#include <drm/drm_drv.h>
#include <drm/drm_print.h>
#include "drm_internal.h"
#include "drm_legacy.h"
#ifdef CONFIG_DRM_LEGACY
/**
* drm_pci_alloc - Allocate a PCI consistent memory block, for DMA.
* @dev: DRM device
* @size: size of block to allocate
* @align: alignment of block
*
* FIXME: This is a needless abstraction of the Linux dma-api and should be
* removed.
*
* Return: A handle to the allocated memory block on success or NULL on
* failure.
*/
drm_dma_handle_t *drm_pci_alloc(struct drm_device * dev, size_t size, size_t align)
{
drm_dma_handle_t *dmah;
/* pci_alloc_consistent only guarantees alignment to the smallest
* PAGE_SIZE order which is greater than or equal to the requested size.
* Return NULL here for now to make sure nobody tries for larger alignment
*/
if (align > size)
return NULL;
dmah = kmalloc(sizeof(drm_dma_handle_t), GFP_KERNEL);
if (!dmah)
return NULL;
dmah->size = size;
dmah->vaddr = dma_alloc_coherent(&dev->pdev->dev, size,
&dmah->busaddr,
GFP_KERNEL);
if (dmah->vaddr == NULL) {
kfree(dmah);
return NULL;
}
return dmah;
}
EXPORT_SYMBOL(drm_pci_alloc);
/**
* drm_pci_free - Free a PCI consistent memory block
* @dev: DRM device
* @dmah: handle to memory block
*
* FIXME: This is a needless abstraction of the Linux dma-api and should be
* removed.
*/
void drm_pci_free(struct drm_device * dev, drm_dma_handle_t * dmah)
{
dma_free_coherent(&dev->pdev->dev, dmah->size, dmah->vaddr,
dmah->busaddr);
kfree(dmah);
}
EXPORT_SYMBOL(drm_pci_free);
#endif
static int drm_get_pci_domain(struct drm_device *dev)
{
#ifndef __alpha__
/* For historical reasons, drm_get_pci_domain() is busticated
* on most archs and has to remain so for userspace interface
* < 1.4, except on alpha which was right from the beginning
*/
if (dev->if_version < 0x10004)
return 0;
#endif /* __alpha__ */
return pci_domain_nr(dev->pdev->bus);
}
int drm_pci_set_busid(struct drm_device *dev, struct drm_master *master)
{
master->unique = kasprintf(GFP_KERNEL, "pci:%04x:%02x:%02x.%d",
drm_get_pci_domain(dev),
dev->pdev->bus->number,
PCI_SLOT(dev->pdev->devfn),
PCI_FUNC(dev->pdev->devfn));
if (!master->unique)
return -ENOMEM;
master->unique_len = strlen(master->unique);
return 0;
}
static int drm_pci_irq_by_busid(struct drm_device *dev, struct drm_irq_busid *p)
{
if ((p->busnum >> 8) != drm_get_pci_domain(dev) ||
(p->busnum & 0xff) != dev->pdev->bus->number ||
p->devnum != PCI_SLOT(dev->pdev->devfn) || p->funcnum != PCI_FUNC(dev->pdev->devfn))
return -EINVAL;
p->irq = dev->pdev->irq;
DRM_DEBUG("%d:%d:%d => IRQ %d\n", p->busnum, p->devnum, p->funcnum,
p->irq);
return 0;
}
/**
* drm_irq_by_busid - Get interrupt from bus ID
* @dev: DRM device
* @data: IOCTL parameter pointing to a drm_irq_busid structure
* @file_priv: DRM file private.
*
* Finds the PCI device with the specified bus id and gets its IRQ number.
* This IOCTL is deprecated, and will now return EINVAL for any busid not equal
* to that of the device that this DRM instance attached to.
*
* Return: 0 on success or a negative error code on failure.
*/
int drm_irq_by_busid(struct drm_device *dev, void *data,
struct drm_file *file_priv)
{
struct drm_irq_busid *p = data;
if (!drm_core_check_feature(dev, DRIVER_LEGACY))
return -EOPNOTSUPP;
/* UMS was only ever support on PCI devices. */
if (WARN_ON(!dev->pdev))
return -EINVAL;
if (!drm_core_check_feature(dev, DRIVER_HAVE_IRQ))
return -EOPNOTSUPP;
return drm_pci_irq_by_busid(dev, p);
}
void drm_pci_agp_destroy(struct drm_device *dev)
{
if (dev->agp) {
arch_phys_wc_del(dev->agp->agp_mtrr);
drm_legacy_agp_clear(dev);
kfree(dev->agp);
dev->agp = NULL;
}
}
#ifdef CONFIG_DRM_LEGACY
static void drm_pci_agp_init(struct drm_device *dev)
{
if (drm_core_check_feature(dev, DRIVER_USE_AGP)) {
if (pci_find_capability(dev->pdev, PCI_CAP_ID_AGP))
dev->agp = drm_agp_init(dev);
drm: rip out drm_core_has_MTRR checks The new arch_phys_wc_add/del functions do the right thing both with and without MTRR support in the kernel. So we can drop these additional checks. David Herrmann suggest to also kill the DRIVER_USE_MTRR flag since it's now unused, which spurred me to do a bit a better audit of the affected drivers. David helped a lot in that. Quoting our mail discussion: On Wed, Jul 10, 2013 at 5:41 PM, David Herrmann <dh.herrmann@gmail.com> wrote: > On Wed, Jul 10, 2013 at 5:22 PM, Daniel Vetter <daniel.vetter@ffwll.ch> wrote: >> On Wed, Jul 10, 2013 at 3:51 PM, David Herrmann <dh.herrmann@gmail.com> wrote: >>>> -#if __OS_HAS_MTRR >>>> -static inline int drm_core_has_MTRR(struct drm_device *dev) >>>> -{ >>>> - return drm_core_check_feature(dev, DRIVER_USE_MTRR); >>>> -} >>>> -#else >>>> -#define drm_core_has_MTRR(dev) (0) >>>> -#endif >>>> - >>> >>> That was the last user of DRIVER_USE_MTRR (apart from drivers setting >>> it in .driver_features). Any reason to keep it around? >> >> Yeah, I guess we could rip things out. Which will also force me to >> properly audit drivers for the eventual behaviour change this could >> entail (in case there's an x86 driver which did not ask for an mtrr, >> but iirc there isn't). > > david@david-mb ~/dev/kernel/linux $ for i in drivers/gpu/drm/* ; do if > test -d "$i" ; then if ! grep -q USE_MTRR -r $i ; then echo $i ; fi ; > fi ; done > drivers/gpu/drm/exynos > drivers/gpu/drm/gma500 > drivers/gpu/drm/i2c > drivers/gpu/drm/nouveau > drivers/gpu/drm/omapdrm > drivers/gpu/drm/qxl > drivers/gpu/drm/rcar-du > drivers/gpu/drm/shmobile > drivers/gpu/drm/tilcdc > drivers/gpu/drm/ttm > drivers/gpu/drm/udl > drivers/gpu/drm/vmwgfx > david@david-mb ~/dev/kernel/linux $ > > So for x86 gma500,nouveau,qxl,udl,vmwgfx don't set DRIVER_USE_MTRR. > But I cannot tell whether they break if we call arch_phys_wc_add/del, > anyway. At least nouveau seemed to work here, but it doesn't use AGP > or drm_bufs, I guess. Cool, thanks a lot for stitching together the list of drivers to look at. So for real KMS drivers it's the drives responsibility to add an mtrr if it needs one. nouvea, radeon, mgag200, i915 and vmwgfx do that already. Somehow the savage driver also ends up doing that, I have no idea why. Note that gma500 as a pure KMS driver doesn't need MTRR setup since the platforms that it supports all support PAT. So no MTRRs needed to get wc iomappings. The mtrr support in the drm core is all for legacy mappings of garts, framebuffers and registers. All legacy drivers set the USE_MTRR flag, so we're good there. All in all I think we can really just ditch this /endquote v2: Also kill DRIVER_USE_MTRR as suggested by David Herrmann v3: Rebase on top of David Herrmann's agp setup/cleanup changes. Cc: David Herrmann <dh.herrmann@gmail.com> Cc: Andy Lutomirski <luto@amacapital.net> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by: Andy Lutomirski <luto@amacapital.net> Reviewed-by: David Herrmann <dh.herrmann@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-08-08 13:41:27 +00:00
if (dev->agp) {
dev->agp->agp_mtrr = arch_phys_wc_add(
dev->agp->agp_info.aper_base,
dev->agp->agp_info.aper_size *
1024 * 1024);
}
}
}
static int drm_get_pci_dev(struct pci_dev *pdev,
const struct pci_device_id *ent,
struct drm_driver *driver)
{
struct drm_device *dev;
int ret;
DRM_DEBUG("\n");
dev = drm_dev_alloc(driver, &pdev->dev);
if (IS_ERR(dev))
return PTR_ERR(dev);
ret = pci_enable_device(pdev);
if (ret)
goto err_free;
dev->pdev = pdev;
#ifdef __alpha__
dev->hose = pdev->sysdata;
#endif
if (drm_core_check_feature(dev, DRIVER_MODESET))
pci_set_drvdata(pdev, dev);
drm: implement experimental render nodes Render nodes provide an API for userspace to use non-privileged GPU commands without any running DRM-Master. It is useful for offscreen rendering, GPGPU clients, and normal render clients which do not perform modesetting. Compared to legacy clients, render clients no longer need any authentication to perform client ioctls. Instead, user-space controls render/client access to GPUs via filesystem access-modes on the render-node. Once a render-node was opened, a client has full access to the client/render operations on the GPU. However, no modesetting or ioctls that affect global state are allowed on render nodes. To prevent privilege-escalation, drivers must explicitly state that they support render nodes. They must mark their render-only ioctls as DRM_RENDER_ALLOW so render clients can use them. Furthermore, they must support clients without any attached master. If filesystem access-modes are not enough for fine-grained access control to render nodes (very unlikely, considering the versaitlity of FS-ACLs), you may still fall-back to fd-passing from server to client (which allows arbitrary access-control). However, note that revoking access is currently impossible and unlikely to get implemented. Note: Render clients no longer have any associated DRM-Master as they are supposed to be independent of any server state. DRM core highly depends on file_priv->master to be non-NULL for modesetting/ctx/etc. commands. Therefore, drivers must be very careful to not require DRM-Master if they support DRIVER_RENDER. So far render-nodes are protected by "drm_rnodes". As long as this module-parameter is not set to 1, a driver will not create render nodes. This allows us to experiment with the API a bit before we stabilize it. v2: drop insecure GEM_FLINK to force use of dmabuf Signed-off-by: David Herrmann <dh.herrmann@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-08-25 16:29:00 +00:00
drm_pci_agp_init(dev);
ret = drm_dev_register(dev, ent->driver_data);
if (ret)
goto err_agp;
/* No locking needed since shadow-attach is single-threaded since it may
* only be called from the per-driver module init hook. */
if (drm_core_check_feature(dev, DRIVER_LEGACY))
list_add_tail(&dev->legacy_dev_list, &driver->legacy_dev_list);
return 0;
err_agp:
drm_pci_agp_destroy(dev);
pci_disable_device(pdev);
err_free:
drm_dev_put(dev);
return ret;
}
/**
* drm_legacy_pci_init - shadow-attach a legacy DRM PCI driver
* @driver: DRM device driver
* @pdriver: PCI device driver
*
* This is only used by legacy dri1 drivers and deprecated.
*
* Return: 0 on success or a negative error code on failure.
*/
int drm_legacy_pci_init(struct drm_driver *driver, struct pci_driver *pdriver)
{
struct pci_dev *pdev = NULL;
const struct pci_device_id *pid;
int i;
DRM_DEBUG("\n");
if (WARN_ON(!(driver->driver_features & DRIVER_LEGACY)))
return -EINVAL;
/* If not using KMS, fall back to stealth mode manual scanning. */
INIT_LIST_HEAD(&driver->legacy_dev_list);
for (i = 0; pdriver->id_table[i].vendor != 0; i++) {
pid = &pdriver->id_table[i];
/* Loop around setting up a DRM device for each PCI device
* matching our ID and device class. If we had the internal
* function that pci_get_subsys and pci_get_class used, we'd
* be able to just pass pid in instead of doing a two-stage
* thing.
*/
pdev = NULL;
while ((pdev =
pci_get_subsys(pid->vendor, pid->device, pid->subvendor,
pid->subdevice, pdev)) != NULL) {
if ((pdev->class & pid->class_mask) != pid->class)
continue;
/* stealth mode requires a manual probe */
pci_dev_get(pdev);
drm_get_pci_dev(pdev, pid, driver);
}
}
return 0;
}
EXPORT_SYMBOL(drm_legacy_pci_init);
/**
* drm_legacy_pci_exit - unregister shadow-attach legacy DRM driver
* @driver: DRM device driver
* @pdriver: PCI device driver
*
* Unregister a DRM driver shadow-attached through drm_legacy_pci_init(). This
* is deprecated and only used by dri1 drivers.
*/
void drm_legacy_pci_exit(struct drm_driver *driver, struct pci_driver *pdriver)
{
struct drm_device *dev, *tmp;
DRM_DEBUG("\n");
if (!(driver->driver_features & DRIVER_LEGACY)) {
WARN_ON(1);
} else {
list_for_each_entry_safe(dev, tmp, &driver->legacy_dev_list,
legacy_dev_list) {
list_del(&dev->legacy_dev_list);
drm_put_dev(dev);
}
}
DRM_INFO("Module unloaded\n");
}
EXPORT_SYMBOL(drm_legacy_pci_exit);
#endif