linux/drivers/gpu/drm/Kconfig

478 lines
12 KiB
Plaintext
Raw Normal View History

# SPDX-License-Identifier: GPL-2.0-only
#
# Drm device configuration
#
# This driver provides support for the
# Direct Rendering Infrastructure (DRI) in XFree86 4.1.0 and higher.
#
menuconfig DRM
tristate "Direct Rendering Manager (XFree86 4.1.0 and higher DRI support)"
depends on (AGP || AGP=n) && !EMULATED_CMPXCHG && HAS_DMA
select DRM_PANEL_ORIENTATION_QUIRKS
select HDMI
drm: Perform cmdline mode parsing during connector initialisation i915.ko has a custom fbdev initialisation routine that aims to preserve the current mode set by the BIOS, unless overruled by the user. The user's wishes are determined by what, if any, mode is specified on the command line (via the video= parameter). However, that command line mode is first parsed by drm_fb_helper_initial_config() which is called after i915.ko's custom initial_config() as a fallback method. So in order for us to honour it, we need to move the cmdline parser earlier. If we perform the connector cmdline parsing as soon as we initialise the connector, that cmdline mode and forced status is then available even if the fbdev helper is not compiled in or never called. We also then expose the cmdline user mode in the connector mode lists. v2: Rebase after connector->name upheaval. v3: Adapt mga200 to look for the cmdline mode in the new place. Nicely simplifies things while at that. v4: Fix checkpatch. v5: Select FB_CMDLINE to adapt to the changed fbdev patch. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=73154 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> (v2) Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> (v2) Cc: dri-devel@lists.freedesktop.org Cc: Julia Lemire <jlemire@matrox.com> Cc: Dave Airlie <airlied@redhat.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-08-06 08:08:32 +00:00
select FB_CMDLINE
select I2C
select I2C_ALGOBIT
select DMA_SHARED_BUFFER
drm/fence: add in-fences support There is now a new property called IN_FENCE_FD attached to every plane state that receives sync_file fds from userspace via the atomic commit IOCTL. The fd is then translated to a fence (that may be a fence_array subclass or just a normal fence) and then used by DRM to fence_wait() for all fences in the sync_file to signal. So it only commits when all framebuffers are ready to scanout. v2: Comments by Daniel Vetter: - remove set state->fence = NULL in destroy phase - accept fence -1 as valid and just return 0 - do not call fence_get() - sync_file_fences_get() already calls it - fence_put() if state->fence is already set, in case userspace set the property more than once. v3: WARN_ON if fence is set but state has no FB v4: Comment from Maarten Lankhorst - allow set fence with no related fb v5: rename FENCE_FD to IN_FENCE_FD v6: Comments by Daniel Vetter: - rename plane_state->in_fence back to "fence" - re-introduce WARN_ON if fence set but no fb - rebase after fence -> dma_fence rename v7: Comments by Brian Starkey - set state->fence to NULL when duplicating the state - fail if IN_FENCE_FD was already set v8: rebase against latest drm-misc Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk> Reviewed-by: Brian Starkey <brian.starkey@arm.com> Reviewed-by: Sean Paul <seanpaul@chromium.org> Tested-by: Robert Foss <robert.foss@collabora.com> [danvet: Rebase onto extracted drm_mode_config.[hc].] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2016-11-15 13:06:39 +00:00
select SYNC_FILE
help
Kernel-level support for the Direct Rendering Infrastructure (DRI)
introduced in XFree86 4.0. If you say Y here, you need to select
the module that's right for your graphics card from the list below.
These modules provide support for synchronization, security, and
DMA transfers. Please see <http://dri.sourceforge.net/> for more
details. You should also select and configure AGP
(/dev/agpgart) support if it is available for your platform.
config DRM_MIPI_DBI
tristate
depends on DRM
config DRM_MIPI_DSI
bool
depends on DRM
drm/dp: Add a drm_aux-dev module for reading/writing dpcd registers. This module is heavily based on i2c-dev. Once loaded, it provides one dev node per DP AUX channel, named drm_dp_auxN, where N is an integer. It's possible to know which connector owns this aux channel by looking at the respective sysfs /sys/class/drm_aux_dev/drm_dp_auxN/connector, if the connector device pointer was correctly set in the aux helper struct. Two main operations are provided on the registers read and write. The address of the register to be read or written is given using lseek. The seek position is updated upon read or write. v2: - lseek is used to select the register to read/write - read/write are used instead of ioctl - no blocking_notifier is used, just a direct callback v3: - use drm_dp_aux_dev prefix for public functions - chardev is named drm_dp_auxN - read/write don't allocate a buffer anymore, and transfer up to 16 bytes a time - remove notifier list from the implementation - option on menuconfig is now a boolean - add inline stub functions to avoid breakage when this option is disabled v4: - fix build system changes - actually disable this module when not selected. v5: - Use kref to avoid device closing while still in use - Don't use list, use an idr for storing aux_dev - Remove "connector" attribute - set aux.dev to the connector drm_connector device, instead of drm_device v6: - Use atomic_t for usage count - Use a mutex instead of spinlock for idr lock - Destroy chardev immediately on unregister - other minor suggestions from Ville v7: - style fixes - error handling fixes v8: - more error handling fixes v9: - remove module_init and module_exit, and add drm_dp_aux_dev_init/exit to drm_kms_helper_init/exit. Signed-off-by: Rafael Antognolli <rafael.antognolli@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1453417821-2811-3-git-send-email-rafael.antognolli@intel.com
2016-01-21 23:10:19 +00:00
config DRM_DP_AUX_CHARDEV
bool "DRM DP AUX Interface"
depends on DRM
help
Choose this option to enable a /dev/drm_dp_auxN node that allows to
read and write values to arbitrary DPCD registers on the DP aux
channel.
config DRM_DEBUG_MM
bool "Insert extra checks and debug info into the DRM range managers"
default n
depends on DRM=y
depends on STACKTRACE_SUPPORT
select STACKDEPOT
help
Enable allocation tracking of memory manager and leak detection on
shutdown.
Recommended for driver developers only.
If in doubt, say "N".
config DRM_DEBUG_SELFTEST
tristate "kselftests for DRM"
depends on DRM
depends on DEBUG_KERNEL
select PRIME_NUMBERS
select DRM_LIB_RANDOM
select DRM_KMS_HELPER
select DRM_EXPORT_FOR_TESTS if m
default n
help
This option provides kernel modules that can be used to run
various selftests on parts of the DRM api. This option is not
useful for distributions or general kernels, but only for kernel
developers working on DRM and associated drivers.
If in doubt, say "N".
config DRM_KMS_HELPER
tristate
depends on DRM
help
CRTC helpers for KMS drivers.
config DRM_KMS_FB_HELPER
bool
depends on DRM_KMS_HELPER
select FB
select FRAMEBUFFER_CONSOLE if !EXPERT
select FRAMEBUFFER_CONSOLE_DETECT_PRIMARY if FRAMEBUFFER_CONSOLE
select FB_SYS_FOPS
select FB_SYS_FILLRECT
select FB_SYS_COPYAREA
select FB_SYS_IMAGEBLIT
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
select FB_DEFERRED_IO
help
FBDEV helpers for KMS drivers.
drm/dp_mst: Add topology ref history tracking for debugging For very subtle mistakes with topology refs, it can be rather difficult to trace them down with the debugging info that we already have. I had one such issue recently while trying to implement suspend/resume reprobing for MST, and ended up coming up with this. Inspired by Chris Wilson's wakeref tracking for i915, this adds a very similar feature to the DP MST helpers, which allows for partial tracking of topology refs for both ports and branch devices. This is a lot less advanced then wakeref tracking: we merely keep a count of all of the spots where a topology ref has been grabbed or dropped, then dump out that history in chronological order when a port or branch device's topology refcount reaches 0. So far, I've found this incredibly useful for debugging topology refcount errors. Since this has the potential to be somewhat slow and loud, we add an expert kernel config option to enable or disable this feature, CONFIG_DRM_DEBUG_DP_MST_TOPOLOGY_REFS. Changes since v1: * Don't forget to destroy topology_ref_history_lock Changes since v4: * Correct order of kref_put()/topology_ref_history_unlock - we can't unlock the history after kref_put() since the memory might have been freed by that point * Don't print message on allocation error failures, the kernel already does this for us Changes since v5: * Get rid of some leftover usages of %px * Remove a leftover empty return; statement Cc: Juston Li <juston.li@intel.com> Cc: Imre Deak <imre.deak@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Harry Wentland <hwentlan@amd.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Sean Paul <sean@poorly.run> Signed-off-by: Lyude Paul <lyude@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191022023641.8026-15-lyude@redhat.com
2019-06-20 21:59:25 +00:00
config DRM_DEBUG_DP_MST_TOPOLOGY_REFS
bool "Enable refcount backtrace history in the DP MST helpers"
depends on STACKTRACE_SUPPORT
drm/dp_mst: Add topology ref history tracking for debugging For very subtle mistakes with topology refs, it can be rather difficult to trace them down with the debugging info that we already have. I had one such issue recently while trying to implement suspend/resume reprobing for MST, and ended up coming up with this. Inspired by Chris Wilson's wakeref tracking for i915, this adds a very similar feature to the DP MST helpers, which allows for partial tracking of topology refs for both ports and branch devices. This is a lot less advanced then wakeref tracking: we merely keep a count of all of the spots where a topology ref has been grabbed or dropped, then dump out that history in chronological order when a port or branch device's topology refcount reaches 0. So far, I've found this incredibly useful for debugging topology refcount errors. Since this has the potential to be somewhat slow and loud, we add an expert kernel config option to enable or disable this feature, CONFIG_DRM_DEBUG_DP_MST_TOPOLOGY_REFS. Changes since v1: * Don't forget to destroy topology_ref_history_lock Changes since v4: * Correct order of kref_put()/topology_ref_history_unlock - we can't unlock the history after kref_put() since the memory might have been freed by that point * Don't print message on allocation error failures, the kernel already does this for us Changes since v5: * Get rid of some leftover usages of %px * Remove a leftover empty return; statement Cc: Juston Li <juston.li@intel.com> Cc: Imre Deak <imre.deak@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Harry Wentland <hwentlan@amd.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Sean Paul <sean@poorly.run> Signed-off-by: Lyude Paul <lyude@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191022023641.8026-15-lyude@redhat.com
2019-06-20 21:59:25 +00:00
select STACKDEPOT
depends on DRM_KMS_HELPER
depends on DEBUG_KERNEL
depends on EXPERT
help
Enables debug tracing for topology refs in DRM's DP MST helpers. A
history of each topology reference/dereference will be printed to the
kernel log once a port or branch device's topology refcount reaches 0.
This has the potential to use a lot of memory and print some very
large kernel messages. If in doubt, say "N".
config DRM_FBDEV_EMULATION
bool "Enable legacy fbdev support for your modesetting driver"
depends on DRM
select DRM_KMS_HELPER
select DRM_KMS_FB_HELPER
default y
help
Choose this option if you have a need for the legacy fbdev
support. Note that this support also provides the linux console
support on top of your modesetting driver.
If in doubt, say "Y".
config DRM_FBDEV_OVERALLOC
int "Overallocation of the fbdev buffer"
depends on DRM_FBDEV_EMULATION
default 100
help
Defines the fbdev buffer overallocation in percent. Default
is 100. Typical values for double buffering will be 200,
triple buffering 300.
drm/fb_helper: Allow leaking fbdev smem_start Since "drm/fb: Stop leaking physical address", the default behaviour of the DRM fbdev emulation is to set the smem_base to 0 and pass the new FBINFO_HIDE_SMEM_START flag. The main reason is to avoid leaking physical addresse to user-space, and it follows a general move over the kernel code to avoid user-space to manipulate physical addresses and then use some other mechanisms like dma-buf to transfer physical buffer handles over multiple subsystems. But, a lot of devices depends on closed sources binaries to enable OpenGL hardware acceleration that uses this smem_start value to pass physical addresses to out-of-tree modules in order to render into these physical adresses. These should use dma-buf buffers allocated from the DRM display device instead and stop relying on fbdev overallocation to gather DMA memory (some HW vendors delivers GBM and Wayland capable binaries, but older unsupported devices won't have these new binaries and are doomed until an Open Source solution like Lima finalizes). Since these devices heavily depends on this kind of software and because the smem_start population was available for years, it's a breakage to stop leaking smem_start without any alternative solutions. This patch adds a Kconfig depending on the EXPERT config and an unsafe kernel module parameter tainting the kernel when enabled. A clear comment and Kconfig help text was added to clarify why and when this patch should be reverted, but in the meantime it's a necessary feature to keep. Cc: Dave Airlie <airlied@gmail.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Cc: Noralf Trønnes <noralf@tronnes.org> Cc: Maxime Ripard <maxime.ripard@bootlin.com> Cc: Eric Anholt <eric@anholt.net> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Rob Clark <robdclark@gmail.com> Cc: Ben Skeggs <skeggsb@gmail.com> Cc: Christian König <christian.koenig@amd.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Maxime Ripard <maxime.ripard@bootlin.com> Tested-by: Maxime Ripard <maxime.ripard@bootlin.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by: Dave Airlie <airlied@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/1538136355-15383-1-git-send-email-narmstrong@baylibre.com
2018-09-28 12:05:55 +00:00
config DRM_FBDEV_LEAK_PHYS_SMEM
bool "Shamelessly allow leaking of fbdev physical address (DANGEROUS)"
depends on DRM_FBDEV_EMULATION && EXPERT
default n
help
In order to keep user-space compatibility, we want in certain
use-cases to keep leaking the fbdev physical address to the
user-space program handling the fbdev buffer.
This affects, not only, Amlogic, Allwinner or Rockchip devices
with ARM Mali GPUs using an userspace Blob.
This option is not supported by upstream developers and should be
removed as soon as possible and be considered as a broken and
legacy behaviour from a modern fbdev device driver.
Please send any bug reports when using this to your proprietary
software vendor that requires this.
If in doubt, say "N" or spread the word to your closed source
library vendor.
drm: allow loading an EDID as firmware to override broken monitor Broken monitors and/or broken graphic boards may send erroneous or no EDID data. This also applies to broken KVM devices that are unable to correctly forward the EDID data of the connected monitor but invent their own fantasy data. This patch allows to specify an EDID data set to be used instead of probing the monitor for it. It contains built-in data sets of frequently used screen resolutions. In addition, a particular EDID data set may be provided in the /lib/firmware directory and loaded via the firmware interface. The name is passed to the kernel as module parameter of the drm_kms_helper module either when loaded options drm_kms_helper edid_firmware=edid/1280x1024.bin or as kernel commandline parameter drm_kms_helper.edid_firmware=edid/1280x1024.bin It is also possible to restrict the usage of a specified EDID data set to a particular connector. This is done by prepending the name of the connector to the name of the EDID data set using the syntax edid_firmware=[<connector>:]<edid> such as, for example, edid_firmware=DVI-I-1:edid/1920x1080.bin in which case no other connector will be affected. The built-in data sets are Resolution Name -------------------------------- 1024x768 edid/1024x768.bin 1280x1024 edid/1280x1024.bin 1680x1050 edid/1680x1050.bin 1920x1080 edid/1920x1080.bin They are ignored, if a file with the same name is available in the /lib/firmware directory. The built-in EDID data sets are based on standard timings that may not apply to a particular monitor and even crash it. Ideally, EDID data of the connected monitor should be used. They may be obtained through the drm/cardX/cardX-<connector>/edid entry in the /sys/devices PCI directory of a correctly working graphics adapter. It is even possible to specify the name of an EDID data set on-the-fly via the /sys/module interface, e.g. echo edid/myedid.bin >/sys/module/drm_kms_helper/parameters/edid_firmware The new screen mode is considered when the related kernel function is called for the first time after the change. Such calls are made when the X server is started or when the display settings dialog is opened in an already running X server. Signed-off-by: Carsten Emde <C.Emde@osadl.org> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-03-18 21:37:33 +00:00
config DRM_LOAD_EDID_FIRMWARE
bool "Allow to specify an EDID data set instead of probing for it"
drm: handle override and firmware EDID at drm_do_get_edid() level Handle debugfs override edid and firmware edid at the low level to transparently and completely replace the real edid. Previously, we practically only used the modes from the override EDID, and none of the other data, such as audio parameters. This change also prevents actual EDID reads when the EDID is to be overridden, but retains the DDC probe. This is useful if the reason for preferring override EDID are problems with reading the data, or corruption of the data. Move firmware EDID loading from helper to core, as the functionality moves to lower level as well. This will result in a change of module parameter from drm_kms_helper.edid_firmware to drm.edid_firmware, which arguably makes more sense anyway. Some future work remains related to override and firmware EDID validation. Like before, no validation is done for override EDID. The firmware EDID is validated separately in the loader. Some unification and deduplication would be in order, to validate all of them at the drm_do_get_edid() level, like "real" EDIDs. v2: move firmware loading to core v3: rebase, commit message refresh Cc: Abdiel Janulgue <abdiel.janulgue@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Tested-by: Abdiel Janulgue <abdiel.janulgue@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Acked-by: Dave Airlie <airlied@gmail.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/1e8a710bcac46e5136c1a7b430074893c81f364a.1505203831.git.jani.nikula@intel.com
2017-09-12 08:19:26 +00:00
depends on DRM
drm: allow loading an EDID as firmware to override broken monitor Broken monitors and/or broken graphic boards may send erroneous or no EDID data. This also applies to broken KVM devices that are unable to correctly forward the EDID data of the connected monitor but invent their own fantasy data. This patch allows to specify an EDID data set to be used instead of probing the monitor for it. It contains built-in data sets of frequently used screen resolutions. In addition, a particular EDID data set may be provided in the /lib/firmware directory and loaded via the firmware interface. The name is passed to the kernel as module parameter of the drm_kms_helper module either when loaded options drm_kms_helper edid_firmware=edid/1280x1024.bin or as kernel commandline parameter drm_kms_helper.edid_firmware=edid/1280x1024.bin It is also possible to restrict the usage of a specified EDID data set to a particular connector. This is done by prepending the name of the connector to the name of the EDID data set using the syntax edid_firmware=[<connector>:]<edid> such as, for example, edid_firmware=DVI-I-1:edid/1920x1080.bin in which case no other connector will be affected. The built-in data sets are Resolution Name -------------------------------- 1024x768 edid/1024x768.bin 1280x1024 edid/1280x1024.bin 1680x1050 edid/1680x1050.bin 1920x1080 edid/1920x1080.bin They are ignored, if a file with the same name is available in the /lib/firmware directory. The built-in EDID data sets are based on standard timings that may not apply to a particular monitor and even crash it. Ideally, EDID data of the connected monitor should be used. They may be obtained through the drm/cardX/cardX-<connector>/edid entry in the /sys/devices PCI directory of a correctly working graphics adapter. It is even possible to specify the name of an EDID data set on-the-fly via the /sys/module interface, e.g. echo edid/myedid.bin >/sys/module/drm_kms_helper/parameters/edid_firmware The new screen mode is considered when the related kernel function is called for the first time after the change. Such calls are made when the X server is started or when the display settings dialog is opened in an already running X server. Signed-off-by: Carsten Emde <C.Emde@osadl.org> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-03-18 21:37:33 +00:00
help
Say Y here, if you want to use EDID data to be loaded from the
/lib/firmware directory or one of the provided built-in
data sets. This may be necessary, if the graphics adapter or
monitor are unable to provide appropriate EDID data. Since this
feature is provided as a workaround for broken hardware, the
default case is N. Details and instructions how to build your own
EDID data are given in Documentation/admin-guide/edid.rst.
drm: allow loading an EDID as firmware to override broken monitor Broken monitors and/or broken graphic boards may send erroneous or no EDID data. This also applies to broken KVM devices that are unable to correctly forward the EDID data of the connected monitor but invent their own fantasy data. This patch allows to specify an EDID data set to be used instead of probing the monitor for it. It contains built-in data sets of frequently used screen resolutions. In addition, a particular EDID data set may be provided in the /lib/firmware directory and loaded via the firmware interface. The name is passed to the kernel as module parameter of the drm_kms_helper module either when loaded options drm_kms_helper edid_firmware=edid/1280x1024.bin or as kernel commandline parameter drm_kms_helper.edid_firmware=edid/1280x1024.bin It is also possible to restrict the usage of a specified EDID data set to a particular connector. This is done by prepending the name of the connector to the name of the EDID data set using the syntax edid_firmware=[<connector>:]<edid> such as, for example, edid_firmware=DVI-I-1:edid/1920x1080.bin in which case no other connector will be affected. The built-in data sets are Resolution Name -------------------------------- 1024x768 edid/1024x768.bin 1280x1024 edid/1280x1024.bin 1680x1050 edid/1680x1050.bin 1920x1080 edid/1920x1080.bin They are ignored, if a file with the same name is available in the /lib/firmware directory. The built-in EDID data sets are based on standard timings that may not apply to a particular monitor and even crash it. Ideally, EDID data of the connected monitor should be used. They may be obtained through the drm/cardX/cardX-<connector>/edid entry in the /sys/devices PCI directory of a correctly working graphics adapter. It is even possible to specify the name of an EDID data set on-the-fly via the /sys/module interface, e.g. echo edid/myedid.bin >/sys/module/drm_kms_helper/parameters/edid_firmware The new screen mode is considered when the related kernel function is called for the first time after the change. Such calls are made when the X server is started or when the display settings dialog is opened in an already running X server. Signed-off-by: Carsten Emde <C.Emde@osadl.org> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-03-18 21:37:33 +00:00
config DRM_DP_CEC
bool "Enable DisplayPort CEC-Tunneling-over-AUX HDMI support"
depends on DRM
select CEC_CORE
help
Choose this option if you want to enable HDMI CEC support for
DisplayPort/USB-C to HDMI adapters.
Note: not all adapters support this feature, and even for those
that do support this they often do not hook up the CEC pin.
config DRM_TTM
drm/radeon: introduce kernel modesetting for radeon hardware Add kernel modesetting support to radeon driver, use the ttm memory manager to manage memory and DRM/GEM to provide userspace API. In order to avoid backward compatibility issue and to allow clean design and code the radeon kernel modesetting use different code path than old radeon/drm driver. When kernel modesetting is enabled the IOCTL of radeon/drm driver are considered as invalid and an error message is printed in the log and they return failure. KMS enabled userspace will use new API to talk with the radeon/drm driver. The new API provide functions to create/destroy/share/mmap buffer object which are then managed by the kernel memory manager (here TTM). In order to submit command to the GPU the userspace provide a buffer holding the command stream, along this buffer userspace have to provide a list of buffer object used by the command stream. The kernel radeon driver will then place buffer in GPU accessible memory and will update command stream to reflect the position of the different buffers. The kernel will also perform security check on command stream provided by the user, we want to catch and forbid any illegal use of the GPU such as DMA into random system memory or into memory not owned by the process supplying the command stream. This part of the code is still incomplete and this why we propose that patch as a staging driver addition, future security might forbid current experimental userspace to run. This code support the following hardware : R1XX,R2XX,R3XX,R4XX,R5XX (radeon up to X1950). Works is underway to provide support for R6XX, R7XX and newer hardware (radeon from HD2XXX to HD4XXX). Authors: Jerome Glisse <jglisse@redhat.com> Dave Airlie <airlied@redhat.com> Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-06-05 12:42:42 +00:00
tristate
depends on DRM && MMU
help
GPU memory management subsystem for devices with multiple
GPU memory types. Will be enabled automatically if a device driver
uses it.
config DRM_TTM_DMA_PAGE_POOL
bool
depends on DRM_TTM && (SWIOTLB || INTEL_IOMMU)
default y
help
Choose this if you need the TTM dma page pool
config DRM_VRAM_HELPER
tristate
depends on DRM
help
Helpers for VRAM memory management
config DRM_TTM_HELPER
tristate
depends on DRM
select DRM_TTM
help
Helpers for ttm-based gem objects
config DRM_GEM_CMA_HELPER
bool
depends on DRM
help
Choose this if you need the GEM CMA helper functions
config DRM_KMS_CMA_HELPER
bool
depends on DRM
select DRM_GEM_CMA_HELPER
help
Choose this if you need the KMS CMA helper functions
config DRM_GEM_SHMEM_HELPER
bool
depends on DRM
help
Choose this if you need the GEM shmem helper functions
config DRM_VM
bool
depends on DRM && MMU
config DRM_SCHED
tristate
depends on DRM
source "drivers/gpu/drm/i2c/Kconfig"
source "drivers/gpu/drm/arm/Kconfig"
config DRM_RADEON
tristate "ATI Radeon"
depends on DRM && PCI && MMU
select FW_LOADER
select DRM_KMS_HELPER
select DRM_TTM
select POWER_SUPPLY
select HWMON
select BACKLIGHT_CLASS_DEVICE
select INTERVAL_TREE
help
Choose this option if you have an ATI Radeon graphics card. There
are both PCI and AGP versions. You don't need to choose this to
run the Radeon in plain VGA mode.
If M is selected, the module will be called radeon.
source "drivers/gpu/drm/radeon/Kconfig"
config DRM_AMDGPU
tristate "AMD GPU"
depends on DRM && PCI && MMU
select FW_LOADER
select DRM_KMS_HELPER
select DRM_SCHED
select DRM_TTM
select POWER_SUPPLY
select HWMON
select BACKLIGHT_CLASS_DEVICE
select INTERVAL_TREE
select CHASH
help
Choose this option if you have a recent AMD Radeon graphics card.
If M is selected, the module will be called amdgpu.
source "drivers/gpu/drm/amd/amdgpu/Kconfig"
source "drivers/gpu/drm/nouveau/Kconfig"
source "drivers/gpu/drm/i915/Kconfig"
config DRM_VGEM
tristate "Virtual GEM provider"
depends on DRM
help
Choose this option to get a virtual graphics memory manager,
as used by Mesa's software renderer for enhanced performance.
If M is selected the module will be called vgem.
config DRM_VKMS
tristate "Virtual KMS (EXPERIMENTAL)"
depends on DRM
drm: vkms: select DRM_KMS_HELPER Without this, we get link errors during randconfig build: drivers/gpu/drm/vkms/vkms_drv.o:(.rodata+0xa0): undefined reference to `drm_atomic_helper_check' drivers/gpu/drm/vkms/vkms_drv.o:(.rodata+0xa8): undefined reference to `drm_atomic_helper_commit' drivers/gpu/drm/vkms/vkms_plane.o:(.rodata+0x0): undefined reference to `drm_atomic_helper_update_plane' drivers/gpu/drm/vkms/vkms_plane.o:(.rodata+0x8): undefined reference to `drm_atomic_helper_disable_plane' drivers/gpu/drm/vkms/vkms_plane.o:(.rodata+0x18): undefined reference to `drm_atomic_helper_plane_reset' drivers/gpu/drm/vkms/vkms_plane.o:(.rodata+0x28): undefined reference to `drm_atomic_helper_plane_duplicate_state' drivers/gpu/drm/vkms/vkms_plane.o:(.rodata+0x30): undefined reference to `drm_atomic_helper_plane_destroy_state' drivers/gpu/drm/vkms/vkms_output.o:(.rodata+0x1c0): undefined reference to `drm_helper_probe_single_connector_modes' drivers/gpu/drm/vkms/vkms_crtc.o:(.rodata+0x40): undefined reference to `drm_atomic_helper_crtc_reset' drivers/gpu/drm/vkms/vkms_crtc.o:(.rodata+0x70): undefined reference to `drm_atomic_helper_set_config' drivers/gpu/drm/vkms/vkms_crtc.o:(.rodata+0x78): undefined reference to `drm_atomic_helper_page_flip' drivers/gpu/drm/vkms/vkms_crtc.o:(.rodata+0x90): undefined reference to `drm_atomic_helper_crtc_duplicate_state' drivers/gpu/drm/vkms/vkms_crtc.o:(.rodata+0x98): undefined reference to `drm_atomic_helper_crtc_destroy_state' Fixes: 854502fa0a38 ("drm/vkms: Add basic CRTC initialization") Fixes: 1c7c5fd916a0 ("drm/vkms: Introduce basic VKMS driver") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20180709154901.1989316-1-arnd@arndb.de
2018-07-09 15:48:18 +00:00
select DRM_KMS_HELPER
select CRC32
default n
help
Virtual Kernel Mode-Setting (VKMS) is used for testing or for
running GPU in a headless machines. Choose this option to get
a VKMS.
If M is selected the module will be called vkms.
source "drivers/gpu/drm/exynos/Kconfig"
source "drivers/gpu/drm/rockchip/Kconfig"
source "drivers/gpu/drm/vmwgfx/Kconfig"
source "drivers/gpu/drm/gma500/Kconfig"
source "drivers/gpu/drm/udl/Kconfig"
source "drivers/gpu/drm/ast/Kconfig"
source "drivers/gpu/drm/mgag200/Kconfig"
source "drivers/gpu/drm/armada/Kconfig"
source "drivers/gpu/drm/atmel-hlcdc/Kconfig"
source "drivers/gpu/drm/rcar-du/Kconfig"
source "drivers/gpu/drm/shmobile/Kconfig"
source "drivers/gpu/drm/sun4i/Kconfig"
source "drivers/gpu/drm/omapdrm/Kconfig"
source "drivers/gpu/drm/tilcdc/Kconfig"
source "drivers/gpu/drm/qxl/Kconfig"
source "drivers/gpu/drm/bochs/Kconfig"
source "drivers/gpu/drm/virtio/Kconfig"
source "drivers/gpu/drm/msm/Kconfig"
drm/layerscape: Add Freescale DCU DRM driver This patch add support for Two Dimensional Animation and Compositing Engine (2D-ACE) on the Freescale SoCs. 2D-ACE is a Freescale display controller. 2D-ACE describes the functionality of the module extremely well its name is a value that cannot be used as a token in programming languages. Instead the valid token "DCU" is used to tag the register names and function names. The Display Controller Unit (DCU) module is a system master that fetches graphics stored in internal or external memory and displays them on a TFT LCD panel. A wide range of panel sizes is supported and the timing of the interface signals is highly configurable. Graphics are read directly from memory and then blended in real-time, which allows for dynamic content creation with minimal CPU intervention. The features: (1) Full RGB888 output to TFT LCD panel. (2) Blending of each pixel using up to 4 source layers dependent on size of panel. (3) Each graphic layer can be placed with one pixel resolution in either axis. (4) Each graphic layer support RGB565 and RGB888 direct colors without alpha channel and BGRA8888 BGRA4444 ARGB1555 direct colors with an alpha channel and YUV422 format. (5) Each graphic layer support alpha blending with 8-bit resolution. This is a simplified version, only one primary plane, one framebuffer, one crtc, one connector and one encoder for TFT LCD panel. Signed-off-by: Alison Wang <b18965@freescale.com> Signed-off-by: Xiubo Li <lixiubo@cmss.chinamobile.com> Signed-off-by: Jianwei Wang <jianwei.wang.chn@gmail.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-08-20 02:19:49 +00:00
source "drivers/gpu/drm/fsl-dcu/Kconfig"
source "drivers/gpu/drm/tegra/Kconfig"
source "drivers/gpu/drm/stm/Kconfig"
source "drivers/gpu/drm/panel/Kconfig"
source "drivers/gpu/drm/bridge/Kconfig"
source "drivers/gpu/drm/sti/Kconfig"
source "drivers/gpu/drm/imx/Kconfig"
2019-06-03 15:23:31 +00:00
source "drivers/gpu/drm/ingenic/Kconfig"
source "drivers/gpu/drm/v3d/Kconfig"
source "drivers/gpu/drm/vc4/Kconfig"
source "drivers/gpu/drm/etnaviv/Kconfig"
source "drivers/gpu/drm/arc/Kconfig"
source "drivers/gpu/drm/hisilicon/Kconfig"
source "drivers/gpu/drm/mediatek/Kconfig"
source "drivers/gpu/drm/zte/Kconfig"
source "drivers/gpu/drm/mxsfb/Kconfig"
drm: Add support for Amlogic Meson Graphic Controller The Amlogic Meson Display controller is composed of several components : DMC|---------------VPU (Video Processing Unit)----------------|------HHI------| | vd1 _______ _____________ _________________ | | D |-------| |----| | | | | HDMI PLL | D | vd2 | VIU | | Video Post | | Video Encoders |<---|-----VCLK | R |-------| |----| Processing | | | | | | osd2 | | | |---| Enci ----------|----|-----VDAC------| R |-------| CSC |----| Scalers | | Encp ----------|----|----HDMI-TX----| A | osd1 | | | Blenders | | Encl ----------|----|---------------| M |-------|______|----|____________| |________________| | | ___|__________________________________________________________|_______________| VIU: Video Input Unit --------------------- The Video Input Unit is in charge of the pixel scanout from the DDR memory. It fetches the frames addresses, stride and parameters from the "Canvas" memory. This part is also in charge of the CSC (Colorspace Conversion). It can handle 2 OSD Planes and 2 Video Planes. VPP: Video Post Processing -------------------------- The Video Post Processing is in charge of the scaling and blending of the various planes into a single pixel stream. There is a special "pre-blending" used by the video planes with a dedicated scaler and a "post-blending" to merge with the OSD Planes. The OSD planes also have a dedicated scaler for one of the OSD. VENC: Video Encoders -------------------- The VENC is composed of the multiple pixel encoders : - ENCI : Interlace Video encoder for CVBS and Interlace HDMI - ENCP : Progressive Video Encoder for HDMI - ENCL : LCD LVDS Encoder The VENC Unit gets a Pixel Clocks (VCLK) from a dedicated HDMI PLL and clock tree and provides the scanout clock to the VPP and VIU. The ENCI is connected to a single VDAC for Composite Output. The ENCI and ENCP are connected to an on-chip HDMI Transceiver. This driver is a DRM/KMS driver using the following DRM components : - GEM-CMA - PRIME-CMA - Atomic Modesetting - FBDev-CMA For the following SoCs : - GXBB Family (S905) - GXL Family (S905X, S905D) - GXM Family (S912) The current driver only supports the CVBS PAL/NTSC output modes, but the CRTC/Planes management should support bigger modes. But Advanced Colorspace Conversion, Scaling and HDMI Modes will be added in a second time. The Device Tree bindings makes use of the endpoints video interface definitions to connect to the optional CVBS and in the future the HDMI Connector nodes. HDMI Support is planned for a next release. Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2016-11-10 14:29:37 +00:00
source "drivers/gpu/drm/meson/Kconfig"
source "drivers/gpu/drm/tiny/Kconfig"
source "drivers/gpu/drm/pl111/Kconfig"
source "drivers/gpu/drm/tve200/Kconfig"
drm/xen-front: Add support for Xen PV display frontend Add support for Xen para-virtualized frontend display driver. Accompanying backend [1] is implemented as a user-space application and its helper library [2], capable of running as a Weston client or DRM master. Configuration of both backend and frontend is done via Xen guest domain configuration options [3]. Driver limitations: 1. Only primary plane without additional properties is supported. 2. Only one video mode supported which resolution is configured via XenStore. 3. All CRTCs operate at fixed frequency of 60Hz. 1. Implement Xen bus state machine for the frontend driver according to the state diagram and recovery flow from display para-virtualized protocol: xen/interface/io/displif.h. 2. Read configuration values from Xen store according to xen/interface/io/displif.h protocol: - read connector(s) configuration - read buffer allocation mode (backend/frontend) 3. Handle Xen event channels: - create for all configured connectors and publish corresponding ring references and event channels in Xen store, so backend can connect - implement event channels interrupt handlers - create and destroy event channels with respect to Xen bus state 4. Implement shared buffer handling according to the para-virtualized display device protocol at xen/interface/io/displif.h: - handle page directories according to displif protocol: - allocate and share page directories - grant references to the required set of pages for the page directory - allocate xen balllooned pages via Xen balloon driver with alloc_xenballooned_pages/free_xenballooned_pages - grant references to the required set of pages for the shared buffer itself - implement pages map/unmap for the buffers allocated by the backend (gnttab_map_refs/gnttab_unmap_refs) 5. Implement kernel modesetiing/connector handling using DRM simple KMS helper pipeline: - implement KMS part of the driver with the help of DRM simple pipepline helper which is possible due to the fact that the para-virtualized driver only supports a single (primary) plane: - initialize connectors according to XenStore configuration - handle frame done events from the backend - create and destroy frame buffers and propagate those to the backend - propagate set/reset mode configuration to the backend on display enable/disable callbacks - send page flip request to the backend and implement logic for reporting backend IO errors on prepare fb callback - implement virtual connector handling: - support only pixel formats suitable for single plane modes - make sure the connector is always connected - support a single video mode as per para-virtualized driver configuration 6. Implement GEM handling depending on driver mode of operation: depending on the requirements for the para-virtualized environment, namely requirements dictated by the accompanying DRM/(v)GPU drivers running in both host and guest environments, number of operating modes of para-virtualized display driver are supported: - display buffers can be allocated by either frontend driver or backend - display buffers can be allocated to be contiguous in memory or not Note! Frontend driver itself has no dependency on contiguous memory for its operation. 6.1. Buffers allocated by the frontend driver. The below modes of operation are configured at compile-time via frontend driver's kernel configuration. 6.1.1. Front driver configured to use GEM CMA helpers This use-case is useful when used with accompanying DRM/vGPU driver in guest domain which was designed to only work with contiguous buffers, e.g. DRM driver based on GEM CMA helpers: such drivers can only import contiguous PRIME buffers, thus requiring frontend driver to provide such. In order to implement this mode of operation para-virtualized frontend driver can be configured to use GEM CMA helpers. 6.1.2. Front driver doesn't use GEM CMA If accompanying drivers can cope with non-contiguous memory then, to lower pressure on CMA subsystem of the kernel, driver can allocate buffers from system memory. Note! If used with accompanying DRM/(v)GPU drivers this mode of operation may require IOMMU support on the platform, so accompanying DRM/vGPU hardware can still reach display buffer memory while importing PRIME buffers from the frontend driver. 6.2. Buffers allocated by the backend This mode of operation is run-time configured via guest domain configuration through XenStore entries. For systems which do not provide IOMMU support, but having specific requirements for display buffers it is possible to allocate such buffers at backend side and share those with the frontend. For example, if host domain is 1:1 mapped and has DRM/GPU hardware expecting physically contiguous memory, this allows implementing zero-copying use-cases. Note, while using this scenario the following should be considered: a) If guest domain dies then pages/grants received from the backend cannot be claimed back b) Misbehaving guest may send too many requests to the backend exhausting its grant references and memory (consider this from security POV). Note! Configuration options 1.1 (contiguous display buffers) and 2 (backend allocated buffers) are not supported at the same time. 7. Handle communication with the backend: - send requests and wait for the responses according to the displif protocol - serialize access to the communication channel - time-out used for backend communication is set to 3000 ms - manage display buffers shared with the backend [1] https://github.com/xen-troops/displ_be [2] https://github.com/xen-troops/libxenbe [3] https://xenbits.xen.org/gitweb/?p=xen.git;a=blob;f=docs/man/xl.cfg.pod.5.in;h=a699367779e2ae1212ff8f638eff0206ec1a1cc9;hb=refs/heads/master#l1257 Signed-off-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20180403112317.28751-2-andr2000@gmail.com
2018-04-03 11:23:17 +00:00
source "drivers/gpu/drm/xen/Kconfig"
source "drivers/gpu/drm/vboxvideo/Kconfig"
drm/lima: driver for ARM Mali4xx GPUs - Mali 4xx GPUs have two kinds of processors GP and PP. GP is for OpenGL vertex shader processing and PP is for fragment shader processing. Each processor has its own MMU so prcessors work in virtual address space. - There's only one GP but multiple PP (max 4 for mali 400 and 8 for mali 450) in the same mali 4xx GPU. All PPs are grouped togather to handle a single fragment shader task divided by FB output tiled pixels. Mali 400 user space driver is responsible for assign target tiled pixels to each PP, but mali 450 has a HW module called DLBU to dynamically balance each PP's load. - User space driver allocate buffer object and map into GPU virtual address space, upload command stream and draw data with CPU mmap of the buffer object, then submit task to GP/PP with a register frame indicating where is the command stream and misc settings. - There's no command stream validation/relocation due to each user process has its own GPU virtual address space. GP/PP's MMU switch virtual address space before running two tasks from different user process. Error or evil user space code just get MMU fault or GP/PP error IRQ, then the HW/SW will be recovered. - Use GEM+shmem for MM. Currently just alloc and pin memory when gem object creation. GPU vm map of the buffer is also done in the alloc stage in kernel space. We may delay the memory allocation and real GPU vm map to command submission stage in the furture as improvement. - Use drm_sched for GPU task schedule. Each OpenGL context should have a lima context object in the kernel to distinguish tasks from different user. drm_sched gets task from each lima context in a fair way. mesa driver can be found here before upstreamed: https://gitlab.freedesktop.org/lima/mesa v8: - add comments for in_sync - fix ctx free miss mutex unlock v7: - remove lima_fence_ops with default value - move fence slab create to device probe - check pad ioctl args to be zero - add comments for user/kernel interface v6: - fix comments by checkpatch.pl v5: - export gp/pp version to userspace - rebase on drm-misc-next v4: - use get param interface to get info - separate context create/free ioctl - remove unused max sched task param - update copyright time - use xarray instead of idr - stop using drmP.h v3: - fix comments from kbuild robot - restrict supported arch to tested ones v2: - fix syscall argument check - fix job finish fence leak since kernel 5.0 - use drm syncobj to replace native fence - move buffer object GPU va map into kernel - reserve syscall argument space for future info - remove kernel gem modifier - switch TTM back to GEM+shmem MM - use time based io poll - use whole register name - adopt gem reservation obj integration - use drm_timeout_abs_to_jiffies Cc: Eric Anholt <eric@anholt.net> Cc: Rob Herring <robh@kernel.org> Cc: Christian König <ckoenig.leichtzumerken@gmail.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Alex Deucher <alexdeucher@gmail.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Rob Clark <robdclark@gmail.com> Cc: Dave Airlie <airlied@gmail.com> Signed-off-by: Andreas Baierl <ichgeh@imkreisrum.de> Signed-off-by: Erico Nunes <nunes.erico@gmail.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Simon Shields <simon@lineageos.org> Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com> Signed-off-by: Qiang Yu <yuq825@gmail.com> Reviewed-by: Eric Anholt <eric@anholt.net> Reviewed-by: Rob Herring <robh@kerrnel.org> Signed-off-by: Eric Anholt <eric@anholt.net> Link: https://patchwork.freedesktop.org/patch/291200/
2019-03-09 12:20:12 +00:00
source "drivers/gpu/drm/lima/Kconfig"
drm/panfrost: Add initial panfrost driver This adds the initial driver for panfrost which supports Arm Mali Midgard and Bifrost family of GPUs. Currently, only the T860 and T760 Midgard GPUs have been tested. v2: - Add GPU reset on job hangs (Tomeu) - Add RuntimePM and devfreq support (Tomeu) - Fix T760 support (Tomeu) - Add a TODO file (Rob, Tomeu) - Support multiple in fences (Tomeu) - Drop support for shared fences (Tomeu) - Fill in MMU de-init (Rob) - Move register definitions back to single header (Rob) - Clean-up hardcoded job submit todos (Rob) - Implement feature setup based on features/issues (Rob) - Add remaining Midgard DT compatible strings (Rob) v3: - Add support for reset lines (Neil) - Add a MAINTAINERS entry (Rob) - Call dma_set_mask_and_coherent (Rob) - Do MMU invalidate on map and unmap. Restructure to do a single operation per map/unmap call. (Rob) - Add a missing explicit padding to struct drm_panfrost_create_bo (Rob) - Fix 0-day error: "panfrost_devfreq.c:151:9-16: ERROR: PTR_ERR applied after initialization to constant on line 150" - Drop HW_FEATURE_AARCH64_MMU conditional (Rob) - s/DRM_PANFROST_PARAM_GPU_ID/DRM_PANFROST_PARAM_GPU_PROD_ID/ (Rob) - Check drm_gem_shmem_prime_import_sg_table() error code (Rob) - Re-order power on sequence (Rob) - Move panfrost_acquire_object_fences() before scheduling job (Rob) - Add NULL checks on array pointers in job clean-up (Rob) - Rework devfreq (Tomeu) - Fix devfreq init with no regulator (Rob) - Various WS and comments clean-up (Rob) Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <maxime.ripard@bootlin.com> Cc: Sean Paul <sean@poorly.run> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Lyude Paul <lyude@redhat.com> Reviewed-by: Alyssa Rosenzweig <alyssa@rosenzweig.io> Reviewed-by: Eric Anholt <eric@anholt.net> Reviewed-by: Steven Price <steven.price@arm.com> Signed-off-by: Marty E. Plummer <hanetzer@startmail.com> Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Rob Herring <robh@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190409205427.6943-4-robh@kernel.org
2018-09-10 19:27:58 +00:00
source "drivers/gpu/drm/panfrost/Kconfig"
source "drivers/gpu/drm/aspeed/Kconfig"
source "drivers/gpu/drm/mcde/Kconfig"
drm/tidss: New driver for TI Keystone platform Display SubSystem This patch adds a new DRM driver for Texas Instruments DSS IPs used on Texas Instruments Keystone K2G, AM65x, and J721e SoCs. The new DSS IP is a major change to the older DSS IP versions, which are supported by the omapdrm driver. While on higher level the Keystone DSS resembles the older DSS versions, the registers are completely different and the internal pipelines differ a lot. DSS IP found on K2G is an "ultra-light" version, and has only a single plane and a single output. The K3 DSS IPs are found on AM65x and J721E SoCs. AM65x DSS has two video ports, one full video plane, and another "lite" plane without scaling support. J721E has 4 video ports, 2 video planes and 2 lite planes. AM65x DSS has also an integrated OLDI (LVDS) output. Version history: v2: - rebased on top of drm-next-2019-11-27 - sort all include lines in all files - remove all include <drm/drmP.h> - remove select "select VIDEOMODE_HELPERS" - call dispc_vp_setup() later in tidss_crtc_atomic_flush() (there is no to call it in new modeset case as it is also called in vp_enable()) - change probe sequence and drm_device allocation (follow example in drm_drv.c) - use __maybe_unused instead of #ifdef for pm functions - remove "struct drm_fbdev_cma *fbdev;" from driver data - check panel connector type before connecting it v3: no change v4: no change v5: - remove fifo underflow irq handling, it is not an error and it should be used for debug purposes only - memory tuning, prefetch plane fifo up to high-threshold value to minimize possibility of underflows. v6: - Check CTM and gamma support from dispc_features when creating crtc - Implement CTM support for k2g and fix k3 CTM implementation - Remove gamma property persistence and always write color properties in a new modeset v7: - Fix checkpatch.pl --strict issues - Rebase on top of drm-misc-next-2020-01-10 v8: - Remove idle debug prints from dispc_init() - Add Reviewed-by: Benoit Parrot <bparrot@ti.com> v9: - Rename dispc_write_irqenable() to dispc_set_irqenable() to avoid conflict exported omapfb function with same name - Add Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Co-developed-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Jyri Sarha <jsarha@ti.com> Acked-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Benoit Parrot <bparrot@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Link: https://patchwork.freedesktop.org/patch/msgid/925fbfad58ff828e8e07fdff7073a0ee65750c3d.1580129724.git.jsarha@ti.com
2019-11-08 07:45:28 +00:00
source "drivers/gpu/drm/tidss/Kconfig"
# Keep legacy drivers last
menuconfig DRM_LEGACY
bool "Enable legacy drivers (DANGEROUS)"
depends on DRM && MMU
select DRM_VM
help
Enable legacy DRI1 drivers. Those drivers expose unsafe and dangerous
APIs to user-space, which can be used to circumvent access
restrictions and other security measures. For backwards compatibility
those drivers are still available, but their use is highly
inadvisable and might harm your system.
You are recommended to use the safe modeset-only drivers instead, and
perform 3D emulation in user-space.
Unless you have strong reasons to go rogue, say "N".
if DRM_LEGACY
config DRM_TDFX
tristate "3dfx Banshee/Voodoo3+"
depends on DRM && PCI
help
Choose this option if you have a 3dfx Banshee or Voodoo3 (or later),
graphics card. If M is selected, the module will be called tdfx.
config DRM_R128
tristate "ATI Rage 128"
depends on DRM && PCI
select FW_LOADER
help
Choose this option if you have an ATI Rage 128 graphics card. If M
is selected, the module will be called r128. AGP support for
this card is strongly suggested (unless you have a PCI version).
config DRM_I810
tristate "Intel I810"
# !PREEMPTION because of missing ioctl locking
depends on DRM && AGP && AGP_INTEL && (!PREEMPTION || BROKEN)
help
Choose this option if you have an Intel I810 graphics card. If M is
selected, the module will be called i810. AGP support is required
for this driver to work.
config DRM_MGA
tristate "Matrox g200/g400"
depends on DRM && PCI
select FW_LOADER
help
Choose this option if you have a Matrox G200, G400 or G450 graphics
card. If M is selected, the module will be called mga. AGP
support is required for this driver to work.
config DRM_SIS
tristate "SiS video cards"
depends on DRM && AGP
depends on FB_SIS || FB_SIS=n
help
Choose this option if you have a SiS 630 or compatible video
chipset. If M is selected the module will be called sis. AGP
support is required for this driver to work.
config DRM_VIA
tristate "Via unichrome video cards"
depends on DRM && PCI
help
Choose this option if you have a Via unichrome or compatible video
chipset. If M is selected the module will be called via.
config DRM_SAVAGE
tristate "Savage video cards"
depends on DRM && PCI
help
Choose this option if you have a Savage3D/4/SuperSavage/Pro/Twister
chipset. If M is selected the module will be called savage.
endif # DRM_LEGACY
config DRM_EXPORT_FOR_TESTS
bool
# Separate option because drm_panel_orientation_quirks.c is shared with fbdev
config DRM_PANEL_ORIENTATION_QUIRKS
tristate
config DRM_LIB_RANDOM
bool
default n