linux/arch/arm/boot/compressed/Makefile

140 lines
3.2 KiB
Makefile
Raw Normal View History

#
# linux/arch/arm/boot/compressed/Makefile
#
# create a compressed vmlinuz image from the original vmlinux
#
ARM: 6617/1: mmc, Add zboot from MMC support for SuperH Mobile ARM This allows a ROM-able zImage to be written to MMC and for SuperH Mobile ARM to boot directly from the MMCIF hardware block. This is achieved by the MaskROM loading the first portion of the image into MERAM and then jumping to it. This portion contains loader code which copies the entire image to SDRAM and jumps to it. From there the zImage boot code proceeds as normal, uncompressing the image into its final location and then jumping to it. Cc: Magnus Damm <magnus.damm@gmail.com> Russell, please consider merging this for 2.6.38. This patch depends on: * "mmc, sh: Move MMCIF_PROGRESS_* into sh_mmcif.h" which will be merged though Paul Mundt's rmobile sh-2.6. The absence of this patch will break the build if the (new) CONFIG_ZBOOT_ROM_MMCIF option is set. There are no subtle side-effects. v2: Addressed comments by Magnus Damm * Fix copyright in vrl4.c * Fix use of #define CONFIG_ZBOOT_ROM_MMCIF in mmcif-sh7372.c * Initialise LED GPIO lines in head-ap4evb.txt instead of mmcif-sh7372.c as this is considered board-specific. v3: Addressed comments made in person by Magnus Damm * Move mmcif_loader to be earlier in the image and reduce the number of blocks of boot program loaded by the MaskRom from 40 to 8 accordingly. * Move LED GPIO initialisation into mmcif_progress_init - This leaves the partner jet script unbloated Other * inline mmcif_update_progress so it is a static inline in a header file v4: * Use htole16() and htole32() in v4rl.c to ensure that the output is little endian v5: Addressed comments by Russell King * Simplify assembly code * Jump to code rather than an address <- bug fix * Use (void __iomem *) as appropriate Roll in mackerel support * This was previously a separate patch, only because of the order in which this code was developed Signed-off-by: Simon Horman <horms@verge.net.au> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-01-11 03:01:08 +00:00
OBJS =
# Ensure that mmcif loader code appears early in the image
# to minimise that number of bocks that have to be read in
# order to load it.
ifeq ($(CONFIG_ZBOOT_ROM_MMCIF),y)
ifeq ($(CONFIG_ARCH_SH7372),y)
OBJS += mmcif-sh7372.o
endif
endif
AFLAGS_head.o += -DTEXT_OFFSET=$(TEXT_OFFSET)
HEAD = head.o
ARM: 6617/1: mmc, Add zboot from MMC support for SuperH Mobile ARM This allows a ROM-able zImage to be written to MMC and for SuperH Mobile ARM to boot directly from the MMCIF hardware block. This is achieved by the MaskROM loading the first portion of the image into MERAM and then jumping to it. This portion contains loader code which copies the entire image to SDRAM and jumps to it. From there the zImage boot code proceeds as normal, uncompressing the image into its final location and then jumping to it. Cc: Magnus Damm <magnus.damm@gmail.com> Russell, please consider merging this for 2.6.38. This patch depends on: * "mmc, sh: Move MMCIF_PROGRESS_* into sh_mmcif.h" which will be merged though Paul Mundt's rmobile sh-2.6. The absence of this patch will break the build if the (new) CONFIG_ZBOOT_ROM_MMCIF option is set. There are no subtle side-effects. v2: Addressed comments by Magnus Damm * Fix copyright in vrl4.c * Fix use of #define CONFIG_ZBOOT_ROM_MMCIF in mmcif-sh7372.c * Initialise LED GPIO lines in head-ap4evb.txt instead of mmcif-sh7372.c as this is considered board-specific. v3: Addressed comments made in person by Magnus Damm * Move mmcif_loader to be earlier in the image and reduce the number of blocks of boot program loaded by the MaskRom from 40 to 8 accordingly. * Move LED GPIO initialisation into mmcif_progress_init - This leaves the partner jet script unbloated Other * inline mmcif_update_progress so it is a static inline in a header file v4: * Use htole16() and htole32() in v4rl.c to ensure that the output is little endian v5: Addressed comments by Russell King * Simplify assembly code * Jump to code rather than an address <- bug fix * Use (void __iomem *) as appropriate Roll in mackerel support * This was previously a separate patch, only because of the order in which this code was developed Signed-off-by: Simon Horman <horms@verge.net.au> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-01-11 03:01:08 +00:00
OBJS += misc.o decompress.o
FONTC = $(srctree)/drivers/video/console/font_acorn_8x8.c
#
# Architecture dependencies
#
ifeq ($(CONFIG_ARCH_ACORN),y)
OBJS += ll_char_wr.o font.o
endif
ifeq ($(CONFIG_ARCH_SHARK),y)
OBJS += head-shark.o ofw-shark.o
endif
ifeq ($(CONFIG_ARCH_P720T),y)
# Borrow this code from SA1100
OBJS += head-sa1100.o
endif
ifeq ($(CONFIG_ARCH_SA1100),y)
OBJS += head-sa1100.o
endif
ifeq ($(CONFIG_ARCH_VT8500),y)
OBJS += head-vt8500.o
endif
ifeq ($(CONFIG_CPU_XSCALE),y)
OBJS += head-xscale.o
endif
ifeq ($(CONFIG_PXA_SHARPSL_DETECT_MACH_ID),y)
OBJS += head-sharpsl.o
endif
ifeq ($(CONFIG_CPU_ENDIAN_BE32),y)
ifeq ($(CONFIG_CPU_CP15),y)
OBJS += big-endian.o
else
# The endian should be set by h/w design.
endif
endif
ifeq ($(CONFIG_ARCH_SHMOBILE),y)
OBJS += head-shmobile.o
endif
#
# We now have a PIC decompressor implementation. Decompressors running
# from RAM should not define ZTEXTADDR. Decompressors running directly
# from ROM or Flash must define ZTEXTADDR (preferably via the config)
# FIXME: Previous assignment to ztextaddr-y is lost here. See SHARK
ifeq ($(CONFIG_ZBOOT_ROM),y)
ZTEXTADDR := $(CONFIG_ZBOOT_ROM_TEXT)
ZBSSADDR := $(CONFIG_ZBOOT_ROM_BSS)
else
ZTEXTADDR := 0
ZBSSADDR := ALIGN(8)
endif
SEDFLAGS = s/TEXT_START/$(ZTEXTADDR)/;s/BSS_START/$(ZBSSADDR)/
suffix_$(CONFIG_KERNEL_GZIP) = gzip
suffix_$(CONFIG_KERNEL_LZO) = lzo
suffix_$(CONFIG_KERNEL_LZMA) = lzma
targets := vmlinux vmlinux.lds \
piggy.$(suffix_y) piggy.$(suffix_y).o \
font.o font.c head.o misc.o $(OBJS)
# Make sure files are removed during clean
extra-y += piggy.gzip piggy.lzo piggy.lzma lib1funcs.S
ifeq ($(CONFIG_FUNCTION_TRACER),y)
ORIG_CFLAGS := $(KBUILD_CFLAGS)
KBUILD_CFLAGS = $(subst -pg, , $(ORIG_CFLAGS))
endif
ccflags-y := -fpic -fno-builtin
asflags-y := -Wa,-march=all
# Supply ZRELADDR to the decompressor via a linker symbol.
ifneq ($(CONFIG_AUTO_ZRELADDR),y)
LDFLAGS_vmlinux += --defsym zreladdr=$(ZRELADDR)
endif
ifeq ($(CONFIG_CPU_ENDIAN_BE8),y)
LDFLAGS_vmlinux += --be8
endif
# ?
LDFLAGS_vmlinux += -p
# Report unresolved symbol references
LDFLAGS_vmlinux += --no-undefined
# Delete all temporary local symbols
LDFLAGS_vmlinux += -X
# Next argument is a linker script
LDFLAGS_vmlinux += -T
# For __aeabi_uidivmod
lib1funcs = $(obj)/lib1funcs.o
$(obj)/lib1funcs.S: $(srctree)/arch/$(SRCARCH)/lib/lib1funcs.S FORCE
$(call cmd,shipped)
$(obj)/vmlinux: $(obj)/vmlinux.lds $(obj)/$(HEAD) $(obj)/piggy.$(suffix_y).o \
$(addprefix $(obj)/, $(OBJS)) $(lib1funcs) FORCE
$(call if_changed,ld)
@:
$(obj)/piggy.$(suffix_y): $(obj)/../Image FORCE
$(call if_changed,$(suffix_y))
$(obj)/piggy.$(suffix_y).o: $(obj)/piggy.$(suffix_y) FORCE
CFLAGS_font.o := -Dstatic=
$(obj)/font.c: $(FONTC)
$(call cmd,shipped)
$(obj)/vmlinux.lds: $(obj)/vmlinux.lds.in arch/arm/boot/Makefile $(KCONFIG_CONFIG)
@sed "$(SEDFLAGS)" < $< > $@