License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 14:07:57 +00:00
|
|
|
/* SPDX-License-Identifier: GPL-2.0 */
|
2008-10-23 05:26:29 +00:00
|
|
|
#ifndef _ASM_X86_PERCPU_H
|
|
|
|
|
#define _ASM_X86_PERCPU_H
|
2008-01-30 12:32:53 +00:00
|
|
|
|
2009-01-13 11:41:35 +00:00
|
|
|
#ifdef CONFIG_X86_64
|
2009-01-13 11:41:35 +00:00
|
|
|
#define __percpu_seg gs
|
|
|
|
|
#define __percpu_mov_op movq
|
2009-01-13 11:41:35 +00:00
|
|
|
#else
|
2009-01-13 11:41:35 +00:00
|
|
|
#define __percpu_seg fs
|
|
|
|
|
#define __percpu_mov_op movl
|
2007-10-11 09:20:03 +00:00
|
|
|
#endif
|
2008-01-30 12:32:53 +00:00
|
|
|
|
|
|
|
|
#ifdef __ASSEMBLY__
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* PER_CPU finds an address of a per-cpu variable.
|
|
|
|
|
*
|
|
|
|
|
* Args:
|
|
|
|
|
* var - variable name
|
|
|
|
|
* reg - 32bit register
|
|
|
|
|
*
|
|
|
|
|
* The resulting address is stored in the "reg" argument.
|
|
|
|
|
*
|
|
|
|
|
* Example:
|
|
|
|
|
* PER_CPU(cpu_gdt_descr, %ebx)
|
|
|
|
|
*/
|
|
|
|
|
#ifdef CONFIG_SMP
|
2009-01-13 11:41:35 +00:00
|
|
|
#define PER_CPU(var, reg) \
|
2009-10-29 13:34:15 +00:00
|
|
|
__percpu_mov_op %__percpu_seg:this_cpu_off, reg; \
|
|
|
|
|
lea var(reg), reg
|
|
|
|
|
#define PER_CPU_VAR(var) %__percpu_seg:var
|
2008-01-30 12:32:53 +00:00
|
|
|
#else /* ! SMP */
|
2009-10-29 13:34:15 +00:00
|
|
|
#define PER_CPU(var, reg) __percpu_mov_op $var, reg
|
|
|
|
|
#define PER_CPU_VAR(var) var
|
2008-01-30 12:32:53 +00:00
|
|
|
#endif /* SMP */
|
|
|
|
|
|
2009-02-08 14:58:39 +00:00
|
|
|
#ifdef CONFIG_X86_64_SMP
|
|
|
|
|
#define INIT_PER_CPU_VAR(var) init_per_cpu__##var
|
|
|
|
|
#else
|
2009-10-29 13:34:15 +00:00
|
|
|
#define INIT_PER_CPU_VAR(var) var
|
2009-02-08 14:58:39 +00:00
|
|
|
#endif
|
|
|
|
|
|
2008-01-30 12:32:53 +00:00
|
|
|
#else /* ...!ASSEMBLY */
|
|
|
|
|
|
2009-06-22 02:56:24 +00:00
|
|
|
#include <linux/kernel.h>
|
2009-01-13 11:41:35 +00:00
|
|
|
#include <linux/stringify.h>
|
2008-01-30 12:32:53 +00:00
|
|
|
|
2009-01-13 11:41:35 +00:00
|
|
|
#ifdef CONFIG_SMP
|
2011-03-27 01:57:18 +00:00
|
|
|
#define __percpu_prefix "%%"__stringify(__percpu_seg)":"
|
2012-05-11 07:35:27 +00:00
|
|
|
#define __my_cpu_offset this_cpu_read(this_cpu_off)
|
2010-09-09 16:17:26 +00:00
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* Compared to the generic __my_cpu_offset version, the following
|
|
|
|
|
* saves one instruction and avoids clobbering a temp register.
|
|
|
|
|
*/
|
2014-06-17 23:12:34 +00:00
|
|
|
#define arch_raw_cpu_ptr(ptr) \
|
2010-09-09 16:17:26 +00:00
|
|
|
({ \
|
|
|
|
|
unsigned long tcp_ptr__; \
|
|
|
|
|
asm volatile("add " __percpu_arg(1) ", %0" \
|
|
|
|
|
: "=r" (tcp_ptr__) \
|
|
|
|
|
: "m" (this_cpu_off), "0" (ptr)); \
|
|
|
|
|
(typeof(*(ptr)) __kernel __force *)tcp_ptr__; \
|
|
|
|
|
})
|
2009-01-13 11:41:35 +00:00
|
|
|
#else
|
2011-03-27 01:57:18 +00:00
|
|
|
#define __percpu_prefix ""
|
2009-01-13 11:41:35 +00:00
|
|
|
#endif
|
2008-01-30 12:32:53 +00:00
|
|
|
|
2014-11-04 08:50:48 +00:00
|
|
|
#define __percpu_arg(x) __percpu_prefix "%" #x
|
2011-03-27 01:57:18 +00:00
|
|
|
|
2009-02-08 14:58:39 +00:00
|
|
|
/*
|
|
|
|
|
* Initialized pointers to per-cpu variables needed for the boot
|
|
|
|
|
* processor need to use these macros to get the proper address
|
|
|
|
|
* offset from __per_cpu_load on SMP.
|
|
|
|
|
*
|
|
|
|
|
* There also must be an entry in vmlinux_64.lds.S
|
|
|
|
|
*/
|
|
|
|
|
#define DECLARE_INIT_PER_CPU(var) \
|
2009-10-29 13:34:15 +00:00
|
|
|
extern typeof(var) init_per_cpu_var(var)
|
2009-02-08 14:58:39 +00:00
|
|
|
|
|
|
|
|
#ifdef CONFIG_X86_64_SMP
|
|
|
|
|
#define init_per_cpu_var(var) init_per_cpu__##var
|
|
|
|
|
#else
|
2009-10-29 13:34:15 +00:00
|
|
|
#define init_per_cpu_var(var) var
|
2009-02-08 14:58:39 +00:00
|
|
|
#endif
|
|
|
|
|
|
2008-01-30 12:32:53 +00:00
|
|
|
/* For arch-specific code, we can use direct single-insn ops (they
|
|
|
|
|
* don't give an lvalue though). */
|
|
|
|
|
extern void __bad_percpu_size(void);
|
|
|
|
|
|
x86/percpu: Differentiate this_cpu_{}() and __this_cpu_{}()
Nadav Amit reported that commit:
b59167ac7baf ("x86/percpu: Fix this_cpu_read()")
added a bunch of constraints to all sorts of code; and while some of
that was correct and desired, some of that seems superfluous.
The thing is, the this_cpu_*() operations are defined IRQ-safe, this
means the values are subject to change from IRQs, and thus must be
reloaded.
Also, the generic form:
local_irq_save()
__this_cpu_read()
local_irq_restore()
would not allow the re-use of previous values; if by nothing else,
then the barrier()s implied by local_irq_*().
Which raises the point that percpu_from_op() and the others also need
that volatile.
OTOH __this_cpu_*() operations are not IRQ-safe and assume external
preempt/IRQ disabling and could thus be allowed more room for
optimization.
This makes the this_cpu_*() vs __this_cpu_*() behaviour more
consistent with other architectures.
$ ./compare.sh defconfig-build defconfig-build1 vmlinux.o
x86_pmu_cancel_txn 80 71 -9,+0
__text_poke 919 964 +45,+0
do_user_addr_fault 1082 1058 -24,+0
__do_page_fault 1194 1178 -16,+0
do_exit 2995 3027 -43,+75
process_one_work 1008 989 -67,+48
finish_task_switch 524 505 -19,+0
__schedule_bug 103 98 -59,+54
__schedule_bug 103 98 -59,+54
__sched_setscheduler 2015 2030 +15,+0
freeze_processes 203 230 +31,-4
rcu_gp_kthread_wake 106 99 -7,+0
rcu_core 1841 1834 -7,+0
call_timer_fn 298 286 -12,+0
can_stop_idle_tick 146 139 -31,+24
perf_pending_event 253 239 -14,+0
shmem_alloc_page 209 213 +4,+0
__alloc_pages_slowpath 3284 3269 -15,+0
umount_tree 671 694 +23,+0
advance_transaction 803 798 -5,+0
con_put_char 71 51 -20,+0
xhci_urb_enqueue 1302 1295 -7,+0
xhci_urb_enqueue 1302 1295 -7,+0
tcp_sacktag_write_queue 2130 2075 -55,+0
tcp_try_undo_loss 229 208 -21,+0
tcp_v4_inbound_md5_hash 438 411 -31,+4
tcp_v4_inbound_md5_hash 438 411 -31,+4
tcp_v6_inbound_md5_hash 469 411 -33,-25
tcp_v6_inbound_md5_hash 469 411 -33,-25
restricted_pointer 434 420 -14,+0
irq_exit 162 154 -8,+0
get_perf_callchain 638 624 -14,+0
rt_mutex_trylock 169 156 -13,+0
avc_has_extended_perms 1092 1089 -3,+0
avc_has_perm_noaudit 309 306 -3,+0
__perf_sw_event 138 122 -16,+0
perf_swevent_get_recursion_context 116 102 -14,+0
__local_bh_enable_ip 93 72 -21,+0
xfrm_input 4175 4161 -14,+0
avc_has_perm 446 443 -3,+0
vm_events_fold_cpu 57 56 -1,+0
vfree 68 61 -7,+0
freeze_processes 203 230 +31,-4
_local_bh_enable 44 30 -14,+0
ip_do_fragment 1982 1944 -38,+0
do_exit 2995 3027 -43,+75
__do_softirq 742 724 -18,+0
cpu_init 1510 1489 -21,+0
account_system_time 80 79 -1,+0
total 12985281 12984819 -742,+280
Reported-by: Nadav Amit <nadav.amit@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20181206112433.GB13675@hirez.programming.kicks-ass.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-12-06 11:24:33 +00:00
|
|
|
#define percpu_to_op(qual, op, var, val) \
|
2008-03-23 08:03:06 +00:00
|
|
|
do { \
|
2009-10-29 13:34:12 +00:00
|
|
|
typedef typeof(var) pto_T__; \
|
2008-03-23 08:03:06 +00:00
|
|
|
if (0) { \
|
2009-10-29 13:34:12 +00:00
|
|
|
pto_T__ pto_tmp__; \
|
|
|
|
|
pto_tmp__ = (val); \
|
2010-06-10 11:10:36 +00:00
|
|
|
(void)pto_tmp__; \
|
2008-03-23 08:03:06 +00:00
|
|
|
} \
|
|
|
|
|
switch (sizeof(var)) { \
|
|
|
|
|
case 1: \
|
x86/percpu: Differentiate this_cpu_{}() and __this_cpu_{}()
Nadav Amit reported that commit:
b59167ac7baf ("x86/percpu: Fix this_cpu_read()")
added a bunch of constraints to all sorts of code; and while some of
that was correct and desired, some of that seems superfluous.
The thing is, the this_cpu_*() operations are defined IRQ-safe, this
means the values are subject to change from IRQs, and thus must be
reloaded.
Also, the generic form:
local_irq_save()
__this_cpu_read()
local_irq_restore()
would not allow the re-use of previous values; if by nothing else,
then the barrier()s implied by local_irq_*().
Which raises the point that percpu_from_op() and the others also need
that volatile.
OTOH __this_cpu_*() operations are not IRQ-safe and assume external
preempt/IRQ disabling and could thus be allowed more room for
optimization.
This makes the this_cpu_*() vs __this_cpu_*() behaviour more
consistent with other architectures.
$ ./compare.sh defconfig-build defconfig-build1 vmlinux.o
x86_pmu_cancel_txn 80 71 -9,+0
__text_poke 919 964 +45,+0
do_user_addr_fault 1082 1058 -24,+0
__do_page_fault 1194 1178 -16,+0
do_exit 2995 3027 -43,+75
process_one_work 1008 989 -67,+48
finish_task_switch 524 505 -19,+0
__schedule_bug 103 98 -59,+54
__schedule_bug 103 98 -59,+54
__sched_setscheduler 2015 2030 +15,+0
freeze_processes 203 230 +31,-4
rcu_gp_kthread_wake 106 99 -7,+0
rcu_core 1841 1834 -7,+0
call_timer_fn 298 286 -12,+0
can_stop_idle_tick 146 139 -31,+24
perf_pending_event 253 239 -14,+0
shmem_alloc_page 209 213 +4,+0
__alloc_pages_slowpath 3284 3269 -15,+0
umount_tree 671 694 +23,+0
advance_transaction 803 798 -5,+0
con_put_char 71 51 -20,+0
xhci_urb_enqueue 1302 1295 -7,+0
xhci_urb_enqueue 1302 1295 -7,+0
tcp_sacktag_write_queue 2130 2075 -55,+0
tcp_try_undo_loss 229 208 -21,+0
tcp_v4_inbound_md5_hash 438 411 -31,+4
tcp_v4_inbound_md5_hash 438 411 -31,+4
tcp_v6_inbound_md5_hash 469 411 -33,-25
tcp_v6_inbound_md5_hash 469 411 -33,-25
restricted_pointer 434 420 -14,+0
irq_exit 162 154 -8,+0
get_perf_callchain 638 624 -14,+0
rt_mutex_trylock 169 156 -13,+0
avc_has_extended_perms 1092 1089 -3,+0
avc_has_perm_noaudit 309 306 -3,+0
__perf_sw_event 138 122 -16,+0
perf_swevent_get_recursion_context 116 102 -14,+0
__local_bh_enable_ip 93 72 -21,+0
xfrm_input 4175 4161 -14,+0
avc_has_perm 446 443 -3,+0
vm_events_fold_cpu 57 56 -1,+0
vfree 68 61 -7,+0
freeze_processes 203 230 +31,-4
_local_bh_enable 44 30 -14,+0
ip_do_fragment 1982 1944 -38,+0
do_exit 2995 3027 -43,+75
__do_softirq 742 724 -18,+0
cpu_init 1510 1489 -21,+0
account_system_time 80 79 -1,+0
total 12985281 12984819 -742,+280
Reported-by: Nadav Amit <nadav.amit@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20181206112433.GB13675@hirez.programming.kicks-ass.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-12-06 11:24:33 +00:00
|
|
|
asm qual (op "b %1,"__percpu_arg(0) \
|
2008-03-23 08:03:06 +00:00
|
|
|
: "+m" (var) \
|
2009-10-29 13:34:12 +00:00
|
|
|
: "qi" ((pto_T__)(val))); \
|
2008-03-23 08:03:06 +00:00
|
|
|
break; \
|
|
|
|
|
case 2: \
|
x86/percpu: Differentiate this_cpu_{}() and __this_cpu_{}()
Nadav Amit reported that commit:
b59167ac7baf ("x86/percpu: Fix this_cpu_read()")
added a bunch of constraints to all sorts of code; and while some of
that was correct and desired, some of that seems superfluous.
The thing is, the this_cpu_*() operations are defined IRQ-safe, this
means the values are subject to change from IRQs, and thus must be
reloaded.
Also, the generic form:
local_irq_save()
__this_cpu_read()
local_irq_restore()
would not allow the re-use of previous values; if by nothing else,
then the barrier()s implied by local_irq_*().
Which raises the point that percpu_from_op() and the others also need
that volatile.
OTOH __this_cpu_*() operations are not IRQ-safe and assume external
preempt/IRQ disabling and could thus be allowed more room for
optimization.
This makes the this_cpu_*() vs __this_cpu_*() behaviour more
consistent with other architectures.
$ ./compare.sh defconfig-build defconfig-build1 vmlinux.o
x86_pmu_cancel_txn 80 71 -9,+0
__text_poke 919 964 +45,+0
do_user_addr_fault 1082 1058 -24,+0
__do_page_fault 1194 1178 -16,+0
do_exit 2995 3027 -43,+75
process_one_work 1008 989 -67,+48
finish_task_switch 524 505 -19,+0
__schedule_bug 103 98 -59,+54
__schedule_bug 103 98 -59,+54
__sched_setscheduler 2015 2030 +15,+0
freeze_processes 203 230 +31,-4
rcu_gp_kthread_wake 106 99 -7,+0
rcu_core 1841 1834 -7,+0
call_timer_fn 298 286 -12,+0
can_stop_idle_tick 146 139 -31,+24
perf_pending_event 253 239 -14,+0
shmem_alloc_page 209 213 +4,+0
__alloc_pages_slowpath 3284 3269 -15,+0
umount_tree 671 694 +23,+0
advance_transaction 803 798 -5,+0
con_put_char 71 51 -20,+0
xhci_urb_enqueue 1302 1295 -7,+0
xhci_urb_enqueue 1302 1295 -7,+0
tcp_sacktag_write_queue 2130 2075 -55,+0
tcp_try_undo_loss 229 208 -21,+0
tcp_v4_inbound_md5_hash 438 411 -31,+4
tcp_v4_inbound_md5_hash 438 411 -31,+4
tcp_v6_inbound_md5_hash 469 411 -33,-25
tcp_v6_inbound_md5_hash 469 411 -33,-25
restricted_pointer 434 420 -14,+0
irq_exit 162 154 -8,+0
get_perf_callchain 638 624 -14,+0
rt_mutex_trylock 169 156 -13,+0
avc_has_extended_perms 1092 1089 -3,+0
avc_has_perm_noaudit 309 306 -3,+0
__perf_sw_event 138 122 -16,+0
perf_swevent_get_recursion_context 116 102 -14,+0
__local_bh_enable_ip 93 72 -21,+0
xfrm_input 4175 4161 -14,+0
avc_has_perm 446 443 -3,+0
vm_events_fold_cpu 57 56 -1,+0
vfree 68 61 -7,+0
freeze_processes 203 230 +31,-4
_local_bh_enable 44 30 -14,+0
ip_do_fragment 1982 1944 -38,+0
do_exit 2995 3027 -43,+75
__do_softirq 742 724 -18,+0
cpu_init 1510 1489 -21,+0
account_system_time 80 79 -1,+0
total 12985281 12984819 -742,+280
Reported-by: Nadav Amit <nadav.amit@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20181206112433.GB13675@hirez.programming.kicks-ass.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-12-06 11:24:33 +00:00
|
|
|
asm qual (op "w %1,"__percpu_arg(0) \
|
2008-03-23 08:03:06 +00:00
|
|
|
: "+m" (var) \
|
2009-10-29 13:34:12 +00:00
|
|
|
: "ri" ((pto_T__)(val))); \
|
2008-03-23 08:03:06 +00:00
|
|
|
break; \
|
|
|
|
|
case 4: \
|
x86/percpu: Differentiate this_cpu_{}() and __this_cpu_{}()
Nadav Amit reported that commit:
b59167ac7baf ("x86/percpu: Fix this_cpu_read()")
added a bunch of constraints to all sorts of code; and while some of
that was correct and desired, some of that seems superfluous.
The thing is, the this_cpu_*() operations are defined IRQ-safe, this
means the values are subject to change from IRQs, and thus must be
reloaded.
Also, the generic form:
local_irq_save()
__this_cpu_read()
local_irq_restore()
would not allow the re-use of previous values; if by nothing else,
then the barrier()s implied by local_irq_*().
Which raises the point that percpu_from_op() and the others also need
that volatile.
OTOH __this_cpu_*() operations are not IRQ-safe and assume external
preempt/IRQ disabling and could thus be allowed more room for
optimization.
This makes the this_cpu_*() vs __this_cpu_*() behaviour more
consistent with other architectures.
$ ./compare.sh defconfig-build defconfig-build1 vmlinux.o
x86_pmu_cancel_txn 80 71 -9,+0
__text_poke 919 964 +45,+0
do_user_addr_fault 1082 1058 -24,+0
__do_page_fault 1194 1178 -16,+0
do_exit 2995 3027 -43,+75
process_one_work 1008 989 -67,+48
finish_task_switch 524 505 -19,+0
__schedule_bug 103 98 -59,+54
__schedule_bug 103 98 -59,+54
__sched_setscheduler 2015 2030 +15,+0
freeze_processes 203 230 +31,-4
rcu_gp_kthread_wake 106 99 -7,+0
rcu_core 1841 1834 -7,+0
call_timer_fn 298 286 -12,+0
can_stop_idle_tick 146 139 -31,+24
perf_pending_event 253 239 -14,+0
shmem_alloc_page 209 213 +4,+0
__alloc_pages_slowpath 3284 3269 -15,+0
umount_tree 671 694 +23,+0
advance_transaction 803 798 -5,+0
con_put_char 71 51 -20,+0
xhci_urb_enqueue 1302 1295 -7,+0
xhci_urb_enqueue 1302 1295 -7,+0
tcp_sacktag_write_queue 2130 2075 -55,+0
tcp_try_undo_loss 229 208 -21,+0
tcp_v4_inbound_md5_hash 438 411 -31,+4
tcp_v4_inbound_md5_hash 438 411 -31,+4
tcp_v6_inbound_md5_hash 469 411 -33,-25
tcp_v6_inbound_md5_hash 469 411 -33,-25
restricted_pointer 434 420 -14,+0
irq_exit 162 154 -8,+0
get_perf_callchain 638 624 -14,+0
rt_mutex_trylock 169 156 -13,+0
avc_has_extended_perms 1092 1089 -3,+0
avc_has_perm_noaudit 309 306 -3,+0
__perf_sw_event 138 122 -16,+0
perf_swevent_get_recursion_context 116 102 -14,+0
__local_bh_enable_ip 93 72 -21,+0
xfrm_input 4175 4161 -14,+0
avc_has_perm 446 443 -3,+0
vm_events_fold_cpu 57 56 -1,+0
vfree 68 61 -7,+0
freeze_processes 203 230 +31,-4
_local_bh_enable 44 30 -14,+0
ip_do_fragment 1982 1944 -38,+0
do_exit 2995 3027 -43,+75
__do_softirq 742 724 -18,+0
cpu_init 1510 1489 -21,+0
account_system_time 80 79 -1,+0
total 12985281 12984819 -742,+280
Reported-by: Nadav Amit <nadav.amit@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20181206112433.GB13675@hirez.programming.kicks-ass.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-12-06 11:24:33 +00:00
|
|
|
asm qual (op "l %1,"__percpu_arg(0) \
|
2008-03-23 08:03:06 +00:00
|
|
|
: "+m" (var) \
|
2009-10-29 13:34:12 +00:00
|
|
|
: "ri" ((pto_T__)(val))); \
|
2008-03-23 08:03:06 +00:00
|
|
|
break; \
|
2009-01-13 11:41:35 +00:00
|
|
|
case 8: \
|
x86/percpu: Differentiate this_cpu_{}() and __this_cpu_{}()
Nadav Amit reported that commit:
b59167ac7baf ("x86/percpu: Fix this_cpu_read()")
added a bunch of constraints to all sorts of code; and while some of
that was correct and desired, some of that seems superfluous.
The thing is, the this_cpu_*() operations are defined IRQ-safe, this
means the values are subject to change from IRQs, and thus must be
reloaded.
Also, the generic form:
local_irq_save()
__this_cpu_read()
local_irq_restore()
would not allow the re-use of previous values; if by nothing else,
then the barrier()s implied by local_irq_*().
Which raises the point that percpu_from_op() and the others also need
that volatile.
OTOH __this_cpu_*() operations are not IRQ-safe and assume external
preempt/IRQ disabling and could thus be allowed more room for
optimization.
This makes the this_cpu_*() vs __this_cpu_*() behaviour more
consistent with other architectures.
$ ./compare.sh defconfig-build defconfig-build1 vmlinux.o
x86_pmu_cancel_txn 80 71 -9,+0
__text_poke 919 964 +45,+0
do_user_addr_fault 1082 1058 -24,+0
__do_page_fault 1194 1178 -16,+0
do_exit 2995 3027 -43,+75
process_one_work 1008 989 -67,+48
finish_task_switch 524 505 -19,+0
__schedule_bug 103 98 -59,+54
__schedule_bug 103 98 -59,+54
__sched_setscheduler 2015 2030 +15,+0
freeze_processes 203 230 +31,-4
rcu_gp_kthread_wake 106 99 -7,+0
rcu_core 1841 1834 -7,+0
call_timer_fn 298 286 -12,+0
can_stop_idle_tick 146 139 -31,+24
perf_pending_event 253 239 -14,+0
shmem_alloc_page 209 213 +4,+0
__alloc_pages_slowpath 3284 3269 -15,+0
umount_tree 671 694 +23,+0
advance_transaction 803 798 -5,+0
con_put_char 71 51 -20,+0
xhci_urb_enqueue 1302 1295 -7,+0
xhci_urb_enqueue 1302 1295 -7,+0
tcp_sacktag_write_queue 2130 2075 -55,+0
tcp_try_undo_loss 229 208 -21,+0
tcp_v4_inbound_md5_hash 438 411 -31,+4
tcp_v4_inbound_md5_hash 438 411 -31,+4
tcp_v6_inbound_md5_hash 469 411 -33,-25
tcp_v6_inbound_md5_hash 469 411 -33,-25
restricted_pointer 434 420 -14,+0
irq_exit 162 154 -8,+0
get_perf_callchain 638 624 -14,+0
rt_mutex_trylock 169 156 -13,+0
avc_has_extended_perms 1092 1089 -3,+0
avc_has_perm_noaudit 309 306 -3,+0
__perf_sw_event 138 122 -16,+0
perf_swevent_get_recursion_context 116 102 -14,+0
__local_bh_enable_ip 93 72 -21,+0
xfrm_input 4175 4161 -14,+0
avc_has_perm 446 443 -3,+0
vm_events_fold_cpu 57 56 -1,+0
vfree 68 61 -7,+0
freeze_processes 203 230 +31,-4
_local_bh_enable 44 30 -14,+0
ip_do_fragment 1982 1944 -38,+0
do_exit 2995 3027 -43,+75
__do_softirq 742 724 -18,+0
cpu_init 1510 1489 -21,+0
account_system_time 80 79 -1,+0
total 12985281 12984819 -742,+280
Reported-by: Nadav Amit <nadav.amit@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20181206112433.GB13675@hirez.programming.kicks-ass.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-12-06 11:24:33 +00:00
|
|
|
asm qual (op "q %1,"__percpu_arg(0) \
|
2009-01-13 11:41:35 +00:00
|
|
|
: "+m" (var) \
|
2009-10-29 13:34:12 +00:00
|
|
|
: "re" ((pto_T__)(val))); \
|
2009-01-13 11:41:35 +00:00
|
|
|
break; \
|
2008-03-23 08:03:06 +00:00
|
|
|
default: __bad_percpu_size(); \
|
|
|
|
|
} \
|
|
|
|
|
} while (0)
|
|
|
|
|
|
2010-01-05 06:34:50 +00:00
|
|
|
/*
|
|
|
|
|
* Generate a percpu add to memory instruction and optimize code
|
2010-04-19 18:51:16 +00:00
|
|
|
* if one is added or subtracted.
|
2010-01-05 06:34:50 +00:00
|
|
|
*/
|
x86/percpu: Differentiate this_cpu_{}() and __this_cpu_{}()
Nadav Amit reported that commit:
b59167ac7baf ("x86/percpu: Fix this_cpu_read()")
added a bunch of constraints to all sorts of code; and while some of
that was correct and desired, some of that seems superfluous.
The thing is, the this_cpu_*() operations are defined IRQ-safe, this
means the values are subject to change from IRQs, and thus must be
reloaded.
Also, the generic form:
local_irq_save()
__this_cpu_read()
local_irq_restore()
would not allow the re-use of previous values; if by nothing else,
then the barrier()s implied by local_irq_*().
Which raises the point that percpu_from_op() and the others also need
that volatile.
OTOH __this_cpu_*() operations are not IRQ-safe and assume external
preempt/IRQ disabling and could thus be allowed more room for
optimization.
This makes the this_cpu_*() vs __this_cpu_*() behaviour more
consistent with other architectures.
$ ./compare.sh defconfig-build defconfig-build1 vmlinux.o
x86_pmu_cancel_txn 80 71 -9,+0
__text_poke 919 964 +45,+0
do_user_addr_fault 1082 1058 -24,+0
__do_page_fault 1194 1178 -16,+0
do_exit 2995 3027 -43,+75
process_one_work 1008 989 -67,+48
finish_task_switch 524 505 -19,+0
__schedule_bug 103 98 -59,+54
__schedule_bug 103 98 -59,+54
__sched_setscheduler 2015 2030 +15,+0
freeze_processes 203 230 +31,-4
rcu_gp_kthread_wake 106 99 -7,+0
rcu_core 1841 1834 -7,+0
call_timer_fn 298 286 -12,+0
can_stop_idle_tick 146 139 -31,+24
perf_pending_event 253 239 -14,+0
shmem_alloc_page 209 213 +4,+0
__alloc_pages_slowpath 3284 3269 -15,+0
umount_tree 671 694 +23,+0
advance_transaction 803 798 -5,+0
con_put_char 71 51 -20,+0
xhci_urb_enqueue 1302 1295 -7,+0
xhci_urb_enqueue 1302 1295 -7,+0
tcp_sacktag_write_queue 2130 2075 -55,+0
tcp_try_undo_loss 229 208 -21,+0
tcp_v4_inbound_md5_hash 438 411 -31,+4
tcp_v4_inbound_md5_hash 438 411 -31,+4
tcp_v6_inbound_md5_hash 469 411 -33,-25
tcp_v6_inbound_md5_hash 469 411 -33,-25
restricted_pointer 434 420 -14,+0
irq_exit 162 154 -8,+0
get_perf_callchain 638 624 -14,+0
rt_mutex_trylock 169 156 -13,+0
avc_has_extended_perms 1092 1089 -3,+0
avc_has_perm_noaudit 309 306 -3,+0
__perf_sw_event 138 122 -16,+0
perf_swevent_get_recursion_context 116 102 -14,+0
__local_bh_enable_ip 93 72 -21,+0
xfrm_input 4175 4161 -14,+0
avc_has_perm 446 443 -3,+0
vm_events_fold_cpu 57 56 -1,+0
vfree 68 61 -7,+0
freeze_processes 203 230 +31,-4
_local_bh_enable 44 30 -14,+0
ip_do_fragment 1982 1944 -38,+0
do_exit 2995 3027 -43,+75
__do_softirq 742 724 -18,+0
cpu_init 1510 1489 -21,+0
account_system_time 80 79 -1,+0
total 12985281 12984819 -742,+280
Reported-by: Nadav Amit <nadav.amit@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20181206112433.GB13675@hirez.programming.kicks-ass.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-12-06 11:24:33 +00:00
|
|
|
#define percpu_add_op(qual, var, val) \
|
2010-01-05 06:34:50 +00:00
|
|
|
do { \
|
|
|
|
|
typedef typeof(var) pao_T__; \
|
|
|
|
|
const int pao_ID__ = (__builtin_constant_p(val) && \
|
percpu: fix this_cpu_sub() subtrahend casting for unsigneds
this_cpu_sub() is implemented as negation and addition.
This patch casts the adjustment to the counter type before negation to
sign extend the adjustment. This helps in cases where the counter type
is wider than an unsigned adjustment. An alternative to this patch is
to declare such operations unsupported, but it seemed useful to avoid
surprises.
This patch specifically helps the following example:
unsigned int delta = 1
preempt_disable()
this_cpu_write(long_counter, 0)
this_cpu_sub(long_counter, delta)
preempt_enable()
Before this change long_counter on a 64 bit machine ends with value
0xffffffff, rather than 0xffffffffffffffff. This is because
this_cpu_sub(pcp, delta) boils down to this_cpu_add(pcp, -delta),
which is basically:
long_counter = 0 + 0xffffffff
Also apply the same cast to:
__this_cpu_sub()
__this_cpu_sub_return()
this_cpu_sub_return()
All percpu_test.ko passes, especially the following cases which
previously failed:
l -= ui_one;
__this_cpu_sub(long_counter, ui_one);
CHECK(l, long_counter, -1);
l -= ui_one;
this_cpu_sub(long_counter, ui_one);
CHECK(l, long_counter, -1);
CHECK(l, long_counter, 0xffffffffffffffff);
ul -= ui_one;
__this_cpu_sub(ulong_counter, ui_one);
CHECK(ul, ulong_counter, -1);
CHECK(ul, ulong_counter, 0xffffffffffffffff);
ul = this_cpu_sub_return(ulong_counter, ui_one);
CHECK(ul, ulong_counter, 2);
ul = __this_cpu_sub_return(ulong_counter, ui_one);
CHECK(ul, ulong_counter, 1);
Signed-off-by: Greg Thelen <gthelen@google.com>
Acked-by: Tejun Heo <tj@kernel.org>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-10-30 20:56:20 +00:00
|
|
|
((val) == 1 || (val) == -1)) ? \
|
|
|
|
|
(int)(val) : 0; \
|
2010-01-05 06:34:50 +00:00
|
|
|
if (0) { \
|
|
|
|
|
pao_T__ pao_tmp__; \
|
|
|
|
|
pao_tmp__ = (val); \
|
2010-06-10 11:10:36 +00:00
|
|
|
(void)pao_tmp__; \
|
2010-01-05 06:34:50 +00:00
|
|
|
} \
|
|
|
|
|
switch (sizeof(var)) { \
|
|
|
|
|
case 1: \
|
|
|
|
|
if (pao_ID__ == 1) \
|
x86/percpu: Differentiate this_cpu_{}() and __this_cpu_{}()
Nadav Amit reported that commit:
b59167ac7baf ("x86/percpu: Fix this_cpu_read()")
added a bunch of constraints to all sorts of code; and while some of
that was correct and desired, some of that seems superfluous.
The thing is, the this_cpu_*() operations are defined IRQ-safe, this
means the values are subject to change from IRQs, and thus must be
reloaded.
Also, the generic form:
local_irq_save()
__this_cpu_read()
local_irq_restore()
would not allow the re-use of previous values; if by nothing else,
then the barrier()s implied by local_irq_*().
Which raises the point that percpu_from_op() and the others also need
that volatile.
OTOH __this_cpu_*() operations are not IRQ-safe and assume external
preempt/IRQ disabling and could thus be allowed more room for
optimization.
This makes the this_cpu_*() vs __this_cpu_*() behaviour more
consistent with other architectures.
$ ./compare.sh defconfig-build defconfig-build1 vmlinux.o
x86_pmu_cancel_txn 80 71 -9,+0
__text_poke 919 964 +45,+0
do_user_addr_fault 1082 1058 -24,+0
__do_page_fault 1194 1178 -16,+0
do_exit 2995 3027 -43,+75
process_one_work 1008 989 -67,+48
finish_task_switch 524 505 -19,+0
__schedule_bug 103 98 -59,+54
__schedule_bug 103 98 -59,+54
__sched_setscheduler 2015 2030 +15,+0
freeze_processes 203 230 +31,-4
rcu_gp_kthread_wake 106 99 -7,+0
rcu_core 1841 1834 -7,+0
call_timer_fn 298 286 -12,+0
can_stop_idle_tick 146 139 -31,+24
perf_pending_event 253 239 -14,+0
shmem_alloc_page 209 213 +4,+0
__alloc_pages_slowpath 3284 3269 -15,+0
umount_tree 671 694 +23,+0
advance_transaction 803 798 -5,+0
con_put_char 71 51 -20,+0
xhci_urb_enqueue 1302 1295 -7,+0
xhci_urb_enqueue 1302 1295 -7,+0
tcp_sacktag_write_queue 2130 2075 -55,+0
tcp_try_undo_loss 229 208 -21,+0
tcp_v4_inbound_md5_hash 438 411 -31,+4
tcp_v4_inbound_md5_hash 438 411 -31,+4
tcp_v6_inbound_md5_hash 469 411 -33,-25
tcp_v6_inbound_md5_hash 469 411 -33,-25
restricted_pointer 434 420 -14,+0
irq_exit 162 154 -8,+0
get_perf_callchain 638 624 -14,+0
rt_mutex_trylock 169 156 -13,+0
avc_has_extended_perms 1092 1089 -3,+0
avc_has_perm_noaudit 309 306 -3,+0
__perf_sw_event 138 122 -16,+0
perf_swevent_get_recursion_context 116 102 -14,+0
__local_bh_enable_ip 93 72 -21,+0
xfrm_input 4175 4161 -14,+0
avc_has_perm 446 443 -3,+0
vm_events_fold_cpu 57 56 -1,+0
vfree 68 61 -7,+0
freeze_processes 203 230 +31,-4
_local_bh_enable 44 30 -14,+0
ip_do_fragment 1982 1944 -38,+0
do_exit 2995 3027 -43,+75
__do_softirq 742 724 -18,+0
cpu_init 1510 1489 -21,+0
account_system_time 80 79 -1,+0
total 12985281 12984819 -742,+280
Reported-by: Nadav Amit <nadav.amit@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20181206112433.GB13675@hirez.programming.kicks-ass.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-12-06 11:24:33 +00:00
|
|
|
asm qual ("incb "__percpu_arg(0) : "+m" (var)); \
|
2010-01-05 06:34:50 +00:00
|
|
|
else if (pao_ID__ == -1) \
|
x86/percpu: Differentiate this_cpu_{}() and __this_cpu_{}()
Nadav Amit reported that commit:
b59167ac7baf ("x86/percpu: Fix this_cpu_read()")
added a bunch of constraints to all sorts of code; and while some of
that was correct and desired, some of that seems superfluous.
The thing is, the this_cpu_*() operations are defined IRQ-safe, this
means the values are subject to change from IRQs, and thus must be
reloaded.
Also, the generic form:
local_irq_save()
__this_cpu_read()
local_irq_restore()
would not allow the re-use of previous values; if by nothing else,
then the barrier()s implied by local_irq_*().
Which raises the point that percpu_from_op() and the others also need
that volatile.
OTOH __this_cpu_*() operations are not IRQ-safe and assume external
preempt/IRQ disabling and could thus be allowed more room for
optimization.
This makes the this_cpu_*() vs __this_cpu_*() behaviour more
consistent with other architectures.
$ ./compare.sh defconfig-build defconfig-build1 vmlinux.o
x86_pmu_cancel_txn 80 71 -9,+0
__text_poke 919 964 +45,+0
do_user_addr_fault 1082 1058 -24,+0
__do_page_fault 1194 1178 -16,+0
do_exit 2995 3027 -43,+75
process_one_work 1008 989 -67,+48
finish_task_switch 524 505 -19,+0
__schedule_bug 103 98 -59,+54
__schedule_bug 103 98 -59,+54
__sched_setscheduler 2015 2030 +15,+0
freeze_processes 203 230 +31,-4
rcu_gp_kthread_wake 106 99 -7,+0
rcu_core 1841 1834 -7,+0
call_timer_fn 298 286 -12,+0
can_stop_idle_tick 146 139 -31,+24
perf_pending_event 253 239 -14,+0
shmem_alloc_page 209 213 +4,+0
__alloc_pages_slowpath 3284 3269 -15,+0
umount_tree 671 694 +23,+0
advance_transaction 803 798 -5,+0
con_put_char 71 51 -20,+0
xhci_urb_enqueue 1302 1295 -7,+0
xhci_urb_enqueue 1302 1295 -7,+0
tcp_sacktag_write_queue 2130 2075 -55,+0
tcp_try_undo_loss 229 208 -21,+0
tcp_v4_inbound_md5_hash 438 411 -31,+4
tcp_v4_inbound_md5_hash 438 411 -31,+4
tcp_v6_inbound_md5_hash 469 411 -33,-25
tcp_v6_inbound_md5_hash 469 411 -33,-25
restricted_pointer 434 420 -14,+0
irq_exit 162 154 -8,+0
get_perf_callchain 638 624 -14,+0
rt_mutex_trylock 169 156 -13,+0
avc_has_extended_perms 1092 1089 -3,+0
avc_has_perm_noaudit 309 306 -3,+0
__perf_sw_event 138 122 -16,+0
perf_swevent_get_recursion_context 116 102 -14,+0
__local_bh_enable_ip 93 72 -21,+0
xfrm_input 4175 4161 -14,+0
avc_has_perm 446 443 -3,+0
vm_events_fold_cpu 57 56 -1,+0
vfree 68 61 -7,+0
freeze_processes 203 230 +31,-4
_local_bh_enable 44 30 -14,+0
ip_do_fragment 1982 1944 -38,+0
do_exit 2995 3027 -43,+75
__do_softirq 742 724 -18,+0
cpu_init 1510 1489 -21,+0
account_system_time 80 79 -1,+0
total 12985281 12984819 -742,+280
Reported-by: Nadav Amit <nadav.amit@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20181206112433.GB13675@hirez.programming.kicks-ass.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-12-06 11:24:33 +00:00
|
|
|
asm qual ("decb "__percpu_arg(0) : "+m" (var)); \
|
2010-01-05 06:34:50 +00:00
|
|
|
else \
|
x86/percpu: Differentiate this_cpu_{}() and __this_cpu_{}()
Nadav Amit reported that commit:
b59167ac7baf ("x86/percpu: Fix this_cpu_read()")
added a bunch of constraints to all sorts of code; and while some of
that was correct and desired, some of that seems superfluous.
The thing is, the this_cpu_*() operations are defined IRQ-safe, this
means the values are subject to change from IRQs, and thus must be
reloaded.
Also, the generic form:
local_irq_save()
__this_cpu_read()
local_irq_restore()
would not allow the re-use of previous values; if by nothing else,
then the barrier()s implied by local_irq_*().
Which raises the point that percpu_from_op() and the others also need
that volatile.
OTOH __this_cpu_*() operations are not IRQ-safe and assume external
preempt/IRQ disabling and could thus be allowed more room for
optimization.
This makes the this_cpu_*() vs __this_cpu_*() behaviour more
consistent with other architectures.
$ ./compare.sh defconfig-build defconfig-build1 vmlinux.o
x86_pmu_cancel_txn 80 71 -9,+0
__text_poke 919 964 +45,+0
do_user_addr_fault 1082 1058 -24,+0
__do_page_fault 1194 1178 -16,+0
do_exit 2995 3027 -43,+75
process_one_work 1008 989 -67,+48
finish_task_switch 524 505 -19,+0
__schedule_bug 103 98 -59,+54
__schedule_bug 103 98 -59,+54
__sched_setscheduler 2015 2030 +15,+0
freeze_processes 203 230 +31,-4
rcu_gp_kthread_wake 106 99 -7,+0
rcu_core 1841 1834 -7,+0
call_timer_fn 298 286 -12,+0
can_stop_idle_tick 146 139 -31,+24
perf_pending_event 253 239 -14,+0
shmem_alloc_page 209 213 +4,+0
__alloc_pages_slowpath 3284 3269 -15,+0
umount_tree 671 694 +23,+0
advance_transaction 803 798 -5,+0
con_put_char 71 51 -20,+0
xhci_urb_enqueue 1302 1295 -7,+0
xhci_urb_enqueue 1302 1295 -7,+0
tcp_sacktag_write_queue 2130 2075 -55,+0
tcp_try_undo_loss 229 208 -21,+0
tcp_v4_inbound_md5_hash 438 411 -31,+4
tcp_v4_inbound_md5_hash 438 411 -31,+4
tcp_v6_inbound_md5_hash 469 411 -33,-25
tcp_v6_inbound_md5_hash 469 411 -33,-25
restricted_pointer 434 420 -14,+0
irq_exit 162 154 -8,+0
get_perf_callchain 638 624 -14,+0
rt_mutex_trylock 169 156 -13,+0
avc_has_extended_perms 1092 1089 -3,+0
avc_has_perm_noaudit 309 306 -3,+0
__perf_sw_event 138 122 -16,+0
perf_swevent_get_recursion_context 116 102 -14,+0
__local_bh_enable_ip 93 72 -21,+0
xfrm_input 4175 4161 -14,+0
avc_has_perm 446 443 -3,+0
vm_events_fold_cpu 57 56 -1,+0
vfree 68 61 -7,+0
freeze_processes 203 230 +31,-4
_local_bh_enable 44 30 -14,+0
ip_do_fragment 1982 1944 -38,+0
do_exit 2995 3027 -43,+75
__do_softirq 742 724 -18,+0
cpu_init 1510 1489 -21,+0
account_system_time 80 79 -1,+0
total 12985281 12984819 -742,+280
Reported-by: Nadav Amit <nadav.amit@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20181206112433.GB13675@hirez.programming.kicks-ass.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-12-06 11:24:33 +00:00
|
|
|
asm qual ("addb %1, "__percpu_arg(0) \
|
2010-01-05 06:34:50 +00:00
|
|
|
: "+m" (var) \
|
|
|
|
|
: "qi" ((pao_T__)(val))); \
|
|
|
|
|
break; \
|
|
|
|
|
case 2: \
|
|
|
|
|
if (pao_ID__ == 1) \
|
x86/percpu: Differentiate this_cpu_{}() and __this_cpu_{}()
Nadav Amit reported that commit:
b59167ac7baf ("x86/percpu: Fix this_cpu_read()")
added a bunch of constraints to all sorts of code; and while some of
that was correct and desired, some of that seems superfluous.
The thing is, the this_cpu_*() operations are defined IRQ-safe, this
means the values are subject to change from IRQs, and thus must be
reloaded.
Also, the generic form:
local_irq_save()
__this_cpu_read()
local_irq_restore()
would not allow the re-use of previous values; if by nothing else,
then the barrier()s implied by local_irq_*().
Which raises the point that percpu_from_op() and the others also need
that volatile.
OTOH __this_cpu_*() operations are not IRQ-safe and assume external
preempt/IRQ disabling and could thus be allowed more room for
optimization.
This makes the this_cpu_*() vs __this_cpu_*() behaviour more
consistent with other architectures.
$ ./compare.sh defconfig-build defconfig-build1 vmlinux.o
x86_pmu_cancel_txn 80 71 -9,+0
__text_poke 919 964 +45,+0
do_user_addr_fault 1082 1058 -24,+0
__do_page_fault 1194 1178 -16,+0
do_exit 2995 3027 -43,+75
process_one_work 1008 989 -67,+48
finish_task_switch 524 505 -19,+0
__schedule_bug 103 98 -59,+54
__schedule_bug 103 98 -59,+54
__sched_setscheduler 2015 2030 +15,+0
freeze_processes 203 230 +31,-4
rcu_gp_kthread_wake 106 99 -7,+0
rcu_core 1841 1834 -7,+0
call_timer_fn 298 286 -12,+0
can_stop_idle_tick 146 139 -31,+24
perf_pending_event 253 239 -14,+0
shmem_alloc_page 209 213 +4,+0
__alloc_pages_slowpath 3284 3269 -15,+0
umount_tree 671 694 +23,+0
advance_transaction 803 798 -5,+0
con_put_char 71 51 -20,+0
xhci_urb_enqueue 1302 1295 -7,+0
xhci_urb_enqueue 1302 1295 -7,+0
tcp_sacktag_write_queue 2130 2075 -55,+0
tcp_try_undo_loss 229 208 -21,+0
tcp_v4_inbound_md5_hash 438 411 -31,+4
tcp_v4_inbound_md5_hash 438 411 -31,+4
tcp_v6_inbound_md5_hash 469 411 -33,-25
tcp_v6_inbound_md5_hash 469 411 -33,-25
restricted_pointer 434 420 -14,+0
irq_exit 162 154 -8,+0
get_perf_callchain 638 624 -14,+0
rt_mutex_trylock 169 156 -13,+0
avc_has_extended_perms 1092 1089 -3,+0
avc_has_perm_noaudit 309 306 -3,+0
__perf_sw_event 138 122 -16,+0
perf_swevent_get_recursion_context 116 102 -14,+0
__local_bh_enable_ip 93 72 -21,+0
xfrm_input 4175 4161 -14,+0
avc_has_perm 446 443 -3,+0
vm_events_fold_cpu 57 56 -1,+0
vfree 68 61 -7,+0
freeze_processes 203 230 +31,-4
_local_bh_enable 44 30 -14,+0
ip_do_fragment 1982 1944 -38,+0
do_exit 2995 3027 -43,+75
__do_softirq 742 724 -18,+0
cpu_init 1510 1489 -21,+0
account_system_time 80 79 -1,+0
total 12985281 12984819 -742,+280
Reported-by: Nadav Amit <nadav.amit@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20181206112433.GB13675@hirez.programming.kicks-ass.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-12-06 11:24:33 +00:00
|
|
|
asm qual ("incw "__percpu_arg(0) : "+m" (var)); \
|
2010-01-05 06:34:50 +00:00
|
|
|
else if (pao_ID__ == -1) \
|
x86/percpu: Differentiate this_cpu_{}() and __this_cpu_{}()
Nadav Amit reported that commit:
b59167ac7baf ("x86/percpu: Fix this_cpu_read()")
added a bunch of constraints to all sorts of code; and while some of
that was correct and desired, some of that seems superfluous.
The thing is, the this_cpu_*() operations are defined IRQ-safe, this
means the values are subject to change from IRQs, and thus must be
reloaded.
Also, the generic form:
local_irq_save()
__this_cpu_read()
local_irq_restore()
would not allow the re-use of previous values; if by nothing else,
then the barrier()s implied by local_irq_*().
Which raises the point that percpu_from_op() and the others also need
that volatile.
OTOH __this_cpu_*() operations are not IRQ-safe and assume external
preempt/IRQ disabling and could thus be allowed more room for
optimization.
This makes the this_cpu_*() vs __this_cpu_*() behaviour more
consistent with other architectures.
$ ./compare.sh defconfig-build defconfig-build1 vmlinux.o
x86_pmu_cancel_txn 80 71 -9,+0
__text_poke 919 964 +45,+0
do_user_addr_fault 1082 1058 -24,+0
__do_page_fault 1194 1178 -16,+0
do_exit 2995 3027 -43,+75
process_one_work 1008 989 -67,+48
finish_task_switch 524 505 -19,+0
__schedule_bug 103 98 -59,+54
__schedule_bug 103 98 -59,+54
__sched_setscheduler 2015 2030 +15,+0
freeze_processes 203 230 +31,-4
rcu_gp_kthread_wake 106 99 -7,+0
rcu_core 1841 1834 -7,+0
call_timer_fn 298 286 -12,+0
can_stop_idle_tick 146 139 -31,+24
perf_pending_event 253 239 -14,+0
shmem_alloc_page 209 213 +4,+0
__alloc_pages_slowpath 3284 3269 -15,+0
umount_tree 671 694 +23,+0
advance_transaction 803 798 -5,+0
con_put_char 71 51 -20,+0
xhci_urb_enqueue 1302 1295 -7,+0
xhci_urb_enqueue 1302 1295 -7,+0
tcp_sacktag_write_queue 2130 2075 -55,+0
tcp_try_undo_loss 229 208 -21,+0
tcp_v4_inbound_md5_hash 438 411 -31,+4
tcp_v4_inbound_md5_hash 438 411 -31,+4
tcp_v6_inbound_md5_hash 469 411 -33,-25
tcp_v6_inbound_md5_hash 469 411 -33,-25
restricted_pointer 434 420 -14,+0
irq_exit 162 154 -8,+0
get_perf_callchain 638 624 -14,+0
rt_mutex_trylock 169 156 -13,+0
avc_has_extended_perms 1092 1089 -3,+0
avc_has_perm_noaudit 309 306 -3,+0
__perf_sw_event 138 122 -16,+0
perf_swevent_get_recursion_context 116 102 -14,+0
__local_bh_enable_ip 93 72 -21,+0
xfrm_input 4175 4161 -14,+0
avc_has_perm 446 443 -3,+0
vm_events_fold_cpu 57 56 -1,+0
vfree 68 61 -7,+0
freeze_processes 203 230 +31,-4
_local_bh_enable 44 30 -14,+0
ip_do_fragment 1982 1944 -38,+0
do_exit 2995 3027 -43,+75
__do_softirq 742 724 -18,+0
cpu_init 1510 1489 -21,+0
account_system_time 80 79 -1,+0
total 12985281 12984819 -742,+280
Reported-by: Nadav Amit <nadav.amit@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20181206112433.GB13675@hirez.programming.kicks-ass.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-12-06 11:24:33 +00:00
|
|
|
asm qual ("decw "__percpu_arg(0) : "+m" (var)); \
|
2010-01-05 06:34:50 +00:00
|
|
|
else \
|
x86/percpu: Differentiate this_cpu_{}() and __this_cpu_{}()
Nadav Amit reported that commit:
b59167ac7baf ("x86/percpu: Fix this_cpu_read()")
added a bunch of constraints to all sorts of code; and while some of
that was correct and desired, some of that seems superfluous.
The thing is, the this_cpu_*() operations are defined IRQ-safe, this
means the values are subject to change from IRQs, and thus must be
reloaded.
Also, the generic form:
local_irq_save()
__this_cpu_read()
local_irq_restore()
would not allow the re-use of previous values; if by nothing else,
then the barrier()s implied by local_irq_*().
Which raises the point that percpu_from_op() and the others also need
that volatile.
OTOH __this_cpu_*() operations are not IRQ-safe and assume external
preempt/IRQ disabling and could thus be allowed more room for
optimization.
This makes the this_cpu_*() vs __this_cpu_*() behaviour more
consistent with other architectures.
$ ./compare.sh defconfig-build defconfig-build1 vmlinux.o
x86_pmu_cancel_txn 80 71 -9,+0
__text_poke 919 964 +45,+0
do_user_addr_fault 1082 1058 -24,+0
__do_page_fault 1194 1178 -16,+0
do_exit 2995 3027 -43,+75
process_one_work 1008 989 -67,+48
finish_task_switch 524 505 -19,+0
__schedule_bug 103 98 -59,+54
__schedule_bug 103 98 -59,+54
__sched_setscheduler 2015 2030 +15,+0
freeze_processes 203 230 +31,-4
rcu_gp_kthread_wake 106 99 -7,+0
rcu_core 1841 1834 -7,+0
call_timer_fn 298 286 -12,+0
can_stop_idle_tick 146 139 -31,+24
perf_pending_event 253 239 -14,+0
shmem_alloc_page 209 213 +4,+0
__alloc_pages_slowpath 3284 3269 -15,+0
umount_tree 671 694 +23,+0
advance_transaction 803 798 -5,+0
con_put_char 71 51 -20,+0
xhci_urb_enqueue 1302 1295 -7,+0
xhci_urb_enqueue 1302 1295 -7,+0
tcp_sacktag_write_queue 2130 2075 -55,+0
tcp_try_undo_loss 229 208 -21,+0
tcp_v4_inbound_md5_hash 438 411 -31,+4
tcp_v4_inbound_md5_hash 438 411 -31,+4
tcp_v6_inbound_md5_hash 469 411 -33,-25
tcp_v6_inbound_md5_hash 469 411 -33,-25
restricted_pointer 434 420 -14,+0
irq_exit 162 154 -8,+0
get_perf_callchain 638 624 -14,+0
rt_mutex_trylock 169 156 -13,+0
avc_has_extended_perms 1092 1089 -3,+0
avc_has_perm_noaudit 309 306 -3,+0
__perf_sw_event 138 122 -16,+0
perf_swevent_get_recursion_context 116 102 -14,+0
__local_bh_enable_ip 93 72 -21,+0
xfrm_input 4175 4161 -14,+0
avc_has_perm 446 443 -3,+0
vm_events_fold_cpu 57 56 -1,+0
vfree 68 61 -7,+0
freeze_processes 203 230 +31,-4
_local_bh_enable 44 30 -14,+0
ip_do_fragment 1982 1944 -38,+0
do_exit 2995 3027 -43,+75
__do_softirq 742 724 -18,+0
cpu_init 1510 1489 -21,+0
account_system_time 80 79 -1,+0
total 12985281 12984819 -742,+280
Reported-by: Nadav Amit <nadav.amit@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20181206112433.GB13675@hirez.programming.kicks-ass.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-12-06 11:24:33 +00:00
|
|
|
asm qual ("addw %1, "__percpu_arg(0) \
|
2010-01-05 06:34:50 +00:00
|
|
|
: "+m" (var) \
|
|
|
|
|
: "ri" ((pao_T__)(val))); \
|
|
|
|
|
break; \
|
|
|
|
|
case 4: \
|
|
|
|
|
if (pao_ID__ == 1) \
|
x86/percpu: Differentiate this_cpu_{}() and __this_cpu_{}()
Nadav Amit reported that commit:
b59167ac7baf ("x86/percpu: Fix this_cpu_read()")
added a bunch of constraints to all sorts of code; and while some of
that was correct and desired, some of that seems superfluous.
The thing is, the this_cpu_*() operations are defined IRQ-safe, this
means the values are subject to change from IRQs, and thus must be
reloaded.
Also, the generic form:
local_irq_save()
__this_cpu_read()
local_irq_restore()
would not allow the re-use of previous values; if by nothing else,
then the barrier()s implied by local_irq_*().
Which raises the point that percpu_from_op() and the others also need
that volatile.
OTOH __this_cpu_*() operations are not IRQ-safe and assume external
preempt/IRQ disabling and could thus be allowed more room for
optimization.
This makes the this_cpu_*() vs __this_cpu_*() behaviour more
consistent with other architectures.
$ ./compare.sh defconfig-build defconfig-build1 vmlinux.o
x86_pmu_cancel_txn 80 71 -9,+0
__text_poke 919 964 +45,+0
do_user_addr_fault 1082 1058 -24,+0
__do_page_fault 1194 1178 -16,+0
do_exit 2995 3027 -43,+75
process_one_work 1008 989 -67,+48
finish_task_switch 524 505 -19,+0
__schedule_bug 103 98 -59,+54
__schedule_bug 103 98 -59,+54
__sched_setscheduler 2015 2030 +15,+0
freeze_processes 203 230 +31,-4
rcu_gp_kthread_wake 106 99 -7,+0
rcu_core 1841 1834 -7,+0
call_timer_fn 298 286 -12,+0
can_stop_idle_tick 146 139 -31,+24
perf_pending_event 253 239 -14,+0
shmem_alloc_page 209 213 +4,+0
__alloc_pages_slowpath 3284 3269 -15,+0
umount_tree 671 694 +23,+0
advance_transaction 803 798 -5,+0
con_put_char 71 51 -20,+0
xhci_urb_enqueue 1302 1295 -7,+0
xhci_urb_enqueue 1302 1295 -7,+0
tcp_sacktag_write_queue 2130 2075 -55,+0
tcp_try_undo_loss 229 208 -21,+0
tcp_v4_inbound_md5_hash 438 411 -31,+4
tcp_v4_inbound_md5_hash 438 411 -31,+4
tcp_v6_inbound_md5_hash 469 411 -33,-25
tcp_v6_inbound_md5_hash 469 411 -33,-25
restricted_pointer 434 420 -14,+0
irq_exit 162 154 -8,+0
get_perf_callchain 638 624 -14,+0
rt_mutex_trylock 169 156 -13,+0
avc_has_extended_perms 1092 1089 -3,+0
avc_has_perm_noaudit 309 306 -3,+0
__perf_sw_event 138 122 -16,+0
perf_swevent_get_recursion_context 116 102 -14,+0
__local_bh_enable_ip 93 72 -21,+0
xfrm_input 4175 4161 -14,+0
avc_has_perm 446 443 -3,+0
vm_events_fold_cpu 57 56 -1,+0
vfree 68 61 -7,+0
freeze_processes 203 230 +31,-4
_local_bh_enable 44 30 -14,+0
ip_do_fragment 1982 1944 -38,+0
do_exit 2995 3027 -43,+75
__do_softirq 742 724 -18,+0
cpu_init 1510 1489 -21,+0
account_system_time 80 79 -1,+0
total 12985281 12984819 -742,+280
Reported-by: Nadav Amit <nadav.amit@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20181206112433.GB13675@hirez.programming.kicks-ass.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-12-06 11:24:33 +00:00
|
|
|
asm qual ("incl "__percpu_arg(0) : "+m" (var)); \
|
2010-01-05 06:34:50 +00:00
|
|
|
else if (pao_ID__ == -1) \
|
x86/percpu: Differentiate this_cpu_{}() and __this_cpu_{}()
Nadav Amit reported that commit:
b59167ac7baf ("x86/percpu: Fix this_cpu_read()")
added a bunch of constraints to all sorts of code; and while some of
that was correct and desired, some of that seems superfluous.
The thing is, the this_cpu_*() operations are defined IRQ-safe, this
means the values are subject to change from IRQs, and thus must be
reloaded.
Also, the generic form:
local_irq_save()
__this_cpu_read()
local_irq_restore()
would not allow the re-use of previous values; if by nothing else,
then the barrier()s implied by local_irq_*().
Which raises the point that percpu_from_op() and the others also need
that volatile.
OTOH __this_cpu_*() operations are not IRQ-safe and assume external
preempt/IRQ disabling and could thus be allowed more room for
optimization.
This makes the this_cpu_*() vs __this_cpu_*() behaviour more
consistent with other architectures.
$ ./compare.sh defconfig-build defconfig-build1 vmlinux.o
x86_pmu_cancel_txn 80 71 -9,+0
__text_poke 919 964 +45,+0
do_user_addr_fault 1082 1058 -24,+0
__do_page_fault 1194 1178 -16,+0
do_exit 2995 3027 -43,+75
process_one_work 1008 989 -67,+48
finish_task_switch 524 505 -19,+0
__schedule_bug 103 98 -59,+54
__schedule_bug 103 98 -59,+54
__sched_setscheduler 2015 2030 +15,+0
freeze_processes 203 230 +31,-4
rcu_gp_kthread_wake 106 99 -7,+0
rcu_core 1841 1834 -7,+0
call_timer_fn 298 286 -12,+0
can_stop_idle_tick 146 139 -31,+24
perf_pending_event 253 239 -14,+0
shmem_alloc_page 209 213 +4,+0
__alloc_pages_slowpath 3284 3269 -15,+0
umount_tree 671 694 +23,+0
advance_transaction 803 798 -5,+0
con_put_char 71 51 -20,+0
xhci_urb_enqueue 1302 1295 -7,+0
xhci_urb_enqueue 1302 1295 -7,+0
tcp_sacktag_write_queue 2130 2075 -55,+0
tcp_try_undo_loss 229 208 -21,+0
tcp_v4_inbound_md5_hash 438 411 -31,+4
tcp_v4_inbound_md5_hash 438 411 -31,+4
tcp_v6_inbound_md5_hash 469 411 -33,-25
tcp_v6_inbound_md5_hash 469 411 -33,-25
restricted_pointer 434 420 -14,+0
irq_exit 162 154 -8,+0
get_perf_callchain 638 624 -14,+0
rt_mutex_trylock 169 156 -13,+0
avc_has_extended_perms 1092 1089 -3,+0
avc_has_perm_noaudit 309 306 -3,+0
__perf_sw_event 138 122 -16,+0
perf_swevent_get_recursion_context 116 102 -14,+0
__local_bh_enable_ip 93 72 -21,+0
xfrm_input 4175 4161 -14,+0
avc_has_perm 446 443 -3,+0
vm_events_fold_cpu 57 56 -1,+0
vfree 68 61 -7,+0
freeze_processes 203 230 +31,-4
_local_bh_enable 44 30 -14,+0
ip_do_fragment 1982 1944 -38,+0
do_exit 2995 3027 -43,+75
__do_softirq 742 724 -18,+0
cpu_init 1510 1489 -21,+0
account_system_time 80 79 -1,+0
total 12985281 12984819 -742,+280
Reported-by: Nadav Amit <nadav.amit@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20181206112433.GB13675@hirez.programming.kicks-ass.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-12-06 11:24:33 +00:00
|
|
|
asm qual ("decl "__percpu_arg(0) : "+m" (var)); \
|
2010-01-05 06:34:50 +00:00
|
|
|
else \
|
x86/percpu: Differentiate this_cpu_{}() and __this_cpu_{}()
Nadav Amit reported that commit:
b59167ac7baf ("x86/percpu: Fix this_cpu_read()")
added a bunch of constraints to all sorts of code; and while some of
that was correct and desired, some of that seems superfluous.
The thing is, the this_cpu_*() operations are defined IRQ-safe, this
means the values are subject to change from IRQs, and thus must be
reloaded.
Also, the generic form:
local_irq_save()
__this_cpu_read()
local_irq_restore()
would not allow the re-use of previous values; if by nothing else,
then the barrier()s implied by local_irq_*().
Which raises the point that percpu_from_op() and the others also need
that volatile.
OTOH __this_cpu_*() operations are not IRQ-safe and assume external
preempt/IRQ disabling and could thus be allowed more room for
optimization.
This makes the this_cpu_*() vs __this_cpu_*() behaviour more
consistent with other architectures.
$ ./compare.sh defconfig-build defconfig-build1 vmlinux.o
x86_pmu_cancel_txn 80 71 -9,+0
__text_poke 919 964 +45,+0
do_user_addr_fault 1082 1058 -24,+0
__do_page_fault 1194 1178 -16,+0
do_exit 2995 3027 -43,+75
process_one_work 1008 989 -67,+48
finish_task_switch 524 505 -19,+0
__schedule_bug 103 98 -59,+54
__schedule_bug 103 98 -59,+54
__sched_setscheduler 2015 2030 +15,+0
freeze_processes 203 230 +31,-4
rcu_gp_kthread_wake 106 99 -7,+0
rcu_core 1841 1834 -7,+0
call_timer_fn 298 286 -12,+0
can_stop_idle_tick 146 139 -31,+24
perf_pending_event 253 239 -14,+0
shmem_alloc_page 209 213 +4,+0
__alloc_pages_slowpath 3284 3269 -15,+0
umount_tree 671 694 +23,+0
advance_transaction 803 798 -5,+0
con_put_char 71 51 -20,+0
xhci_urb_enqueue 1302 1295 -7,+0
xhci_urb_enqueue 1302 1295 -7,+0
tcp_sacktag_write_queue 2130 2075 -55,+0
tcp_try_undo_loss 229 208 -21,+0
tcp_v4_inbound_md5_hash 438 411 -31,+4
tcp_v4_inbound_md5_hash 438 411 -31,+4
tcp_v6_inbound_md5_hash 469 411 -33,-25
tcp_v6_inbound_md5_hash 469 411 -33,-25
restricted_pointer 434 420 -14,+0
irq_exit 162 154 -8,+0
get_perf_callchain 638 624 -14,+0
rt_mutex_trylock 169 156 -13,+0
avc_has_extended_perms 1092 1089 -3,+0
avc_has_perm_noaudit 309 306 -3,+0
__perf_sw_event 138 122 -16,+0
perf_swevent_get_recursion_context 116 102 -14,+0
__local_bh_enable_ip 93 72 -21,+0
xfrm_input 4175 4161 -14,+0
avc_has_perm 446 443 -3,+0
vm_events_fold_cpu 57 56 -1,+0
vfree 68 61 -7,+0
freeze_processes 203 230 +31,-4
_local_bh_enable 44 30 -14,+0
ip_do_fragment 1982 1944 -38,+0
do_exit 2995 3027 -43,+75
__do_softirq 742 724 -18,+0
cpu_init 1510 1489 -21,+0
account_system_time 80 79 -1,+0
total 12985281 12984819 -742,+280
Reported-by: Nadav Amit <nadav.amit@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20181206112433.GB13675@hirez.programming.kicks-ass.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-12-06 11:24:33 +00:00
|
|
|
asm qual ("addl %1, "__percpu_arg(0) \
|
2010-01-05 06:34:50 +00:00
|
|
|
: "+m" (var) \
|
|
|
|
|
: "ri" ((pao_T__)(val))); \
|
|
|
|
|
break; \
|
|
|
|
|
case 8: \
|
|
|
|
|
if (pao_ID__ == 1) \
|
x86/percpu: Differentiate this_cpu_{}() and __this_cpu_{}()
Nadav Amit reported that commit:
b59167ac7baf ("x86/percpu: Fix this_cpu_read()")
added a bunch of constraints to all sorts of code; and while some of
that was correct and desired, some of that seems superfluous.
The thing is, the this_cpu_*() operations are defined IRQ-safe, this
means the values are subject to change from IRQs, and thus must be
reloaded.
Also, the generic form:
local_irq_save()
__this_cpu_read()
local_irq_restore()
would not allow the re-use of previous values; if by nothing else,
then the barrier()s implied by local_irq_*().
Which raises the point that percpu_from_op() and the others also need
that volatile.
OTOH __this_cpu_*() operations are not IRQ-safe and assume external
preempt/IRQ disabling and could thus be allowed more room for
optimization.
This makes the this_cpu_*() vs __this_cpu_*() behaviour more
consistent with other architectures.
$ ./compare.sh defconfig-build defconfig-build1 vmlinux.o
x86_pmu_cancel_txn 80 71 -9,+0
__text_poke 919 964 +45,+0
do_user_addr_fault 1082 1058 -24,+0
__do_page_fault 1194 1178 -16,+0
do_exit 2995 3027 -43,+75
process_one_work 1008 989 -67,+48
finish_task_switch 524 505 -19,+0
__schedule_bug 103 98 -59,+54
__schedule_bug 103 98 -59,+54
__sched_setscheduler 2015 2030 +15,+0
freeze_processes 203 230 +31,-4
rcu_gp_kthread_wake 106 99 -7,+0
rcu_core 1841 1834 -7,+0
call_timer_fn 298 286 -12,+0
can_stop_idle_tick 146 139 -31,+24
perf_pending_event 253 239 -14,+0
shmem_alloc_page 209 213 +4,+0
__alloc_pages_slowpath 3284 3269 -15,+0
umount_tree 671 694 +23,+0
advance_transaction 803 798 -5,+0
con_put_char 71 51 -20,+0
xhci_urb_enqueue 1302 1295 -7,+0
xhci_urb_enqueue 1302 1295 -7,+0
tcp_sacktag_write_queue 2130 2075 -55,+0
tcp_try_undo_loss 229 208 -21,+0
tcp_v4_inbound_md5_hash 438 411 -31,+4
tcp_v4_inbound_md5_hash 438 411 -31,+4
tcp_v6_inbound_md5_hash 469 411 -33,-25
tcp_v6_inbound_md5_hash 469 411 -33,-25
restricted_pointer 434 420 -14,+0
irq_exit 162 154 -8,+0
get_perf_callchain 638 624 -14,+0
rt_mutex_trylock 169 156 -13,+0
avc_has_extended_perms 1092 1089 -3,+0
avc_has_perm_noaudit 309 306 -3,+0
__perf_sw_event 138 122 -16,+0
perf_swevent_get_recursion_context 116 102 -14,+0
__local_bh_enable_ip 93 72 -21,+0
xfrm_input 4175 4161 -14,+0
avc_has_perm 446 443 -3,+0
vm_events_fold_cpu 57 56 -1,+0
vfree 68 61 -7,+0
freeze_processes 203 230 +31,-4
_local_bh_enable 44 30 -14,+0
ip_do_fragment 1982 1944 -38,+0
do_exit 2995 3027 -43,+75
__do_softirq 742 724 -18,+0
cpu_init 1510 1489 -21,+0
account_system_time 80 79 -1,+0
total 12985281 12984819 -742,+280
Reported-by: Nadav Amit <nadav.amit@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20181206112433.GB13675@hirez.programming.kicks-ass.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-12-06 11:24:33 +00:00
|
|
|
asm qual ("incq "__percpu_arg(0) : "+m" (var)); \
|
2010-01-05 06:34:50 +00:00
|
|
|
else if (pao_ID__ == -1) \
|
x86/percpu: Differentiate this_cpu_{}() and __this_cpu_{}()
Nadav Amit reported that commit:
b59167ac7baf ("x86/percpu: Fix this_cpu_read()")
added a bunch of constraints to all sorts of code; and while some of
that was correct and desired, some of that seems superfluous.
The thing is, the this_cpu_*() operations are defined IRQ-safe, this
means the values are subject to change from IRQs, and thus must be
reloaded.
Also, the generic form:
local_irq_save()
__this_cpu_read()
local_irq_restore()
would not allow the re-use of previous values; if by nothing else,
then the barrier()s implied by local_irq_*().
Which raises the point that percpu_from_op() and the others also need
that volatile.
OTOH __this_cpu_*() operations are not IRQ-safe and assume external
preempt/IRQ disabling and could thus be allowed more room for
optimization.
This makes the this_cpu_*() vs __this_cpu_*() behaviour more
consistent with other architectures.
$ ./compare.sh defconfig-build defconfig-build1 vmlinux.o
x86_pmu_cancel_txn 80 71 -9,+0
__text_poke 919 964 +45,+0
do_user_addr_fault 1082 1058 -24,+0
__do_page_fault 1194 1178 -16,+0
do_exit 2995 3027 -43,+75
process_one_work 1008 989 -67,+48
finish_task_switch 524 505 -19,+0
__schedule_bug 103 98 -59,+54
__schedule_bug 103 98 -59,+54
__sched_setscheduler 2015 2030 +15,+0
freeze_processes 203 230 +31,-4
rcu_gp_kthread_wake 106 99 -7,+0
rcu_core 1841 1834 -7,+0
call_timer_fn 298 286 -12,+0
can_stop_idle_tick 146 139 -31,+24
perf_pending_event 253 239 -14,+0
shmem_alloc_page 209 213 +4,+0
__alloc_pages_slowpath 3284 3269 -15,+0
umount_tree 671 694 +23,+0
advance_transaction 803 798 -5,+0
con_put_char 71 51 -20,+0
xhci_urb_enqueue 1302 1295 -7,+0
xhci_urb_enqueue 1302 1295 -7,+0
tcp_sacktag_write_queue 2130 2075 -55,+0
tcp_try_undo_loss 229 208 -21,+0
tcp_v4_inbound_md5_hash 438 411 -31,+4
tcp_v4_inbound_md5_hash 438 411 -31,+4
tcp_v6_inbound_md5_hash 469 411 -33,-25
tcp_v6_inbound_md5_hash 469 411 -33,-25
restricted_pointer 434 420 -14,+0
irq_exit 162 154 -8,+0
get_perf_callchain 638 624 -14,+0
rt_mutex_trylock 169 156 -13,+0
avc_has_extended_perms 1092 1089 -3,+0
avc_has_perm_noaudit 309 306 -3,+0
__perf_sw_event 138 122 -16,+0
perf_swevent_get_recursion_context 116 102 -14,+0
__local_bh_enable_ip 93 72 -21,+0
xfrm_input 4175 4161 -14,+0
avc_has_perm 446 443 -3,+0
vm_events_fold_cpu 57 56 -1,+0
vfree 68 61 -7,+0
freeze_processes 203 230 +31,-4
_local_bh_enable 44 30 -14,+0
ip_do_fragment 1982 1944 -38,+0
do_exit 2995 3027 -43,+75
__do_softirq 742 724 -18,+0
cpu_init 1510 1489 -21,+0
account_system_time 80 79 -1,+0
total 12985281 12984819 -742,+280
Reported-by: Nadav Amit <nadav.amit@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20181206112433.GB13675@hirez.programming.kicks-ass.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-12-06 11:24:33 +00:00
|
|
|
asm qual ("decq "__percpu_arg(0) : "+m" (var)); \
|
2010-01-05 06:34:50 +00:00
|
|
|
else \
|
x86/percpu: Differentiate this_cpu_{}() and __this_cpu_{}()
Nadav Amit reported that commit:
b59167ac7baf ("x86/percpu: Fix this_cpu_read()")
added a bunch of constraints to all sorts of code; and while some of
that was correct and desired, some of that seems superfluous.
The thing is, the this_cpu_*() operations are defined IRQ-safe, this
means the values are subject to change from IRQs, and thus must be
reloaded.
Also, the generic form:
local_irq_save()
__this_cpu_read()
local_irq_restore()
would not allow the re-use of previous values; if by nothing else,
then the barrier()s implied by local_irq_*().
Which raises the point that percpu_from_op() and the others also need
that volatile.
OTOH __this_cpu_*() operations are not IRQ-safe and assume external
preempt/IRQ disabling and could thus be allowed more room for
optimization.
This makes the this_cpu_*() vs __this_cpu_*() behaviour more
consistent with other architectures.
$ ./compare.sh defconfig-build defconfig-build1 vmlinux.o
x86_pmu_cancel_txn 80 71 -9,+0
__text_poke 919 964 +45,+0
do_user_addr_fault 1082 1058 -24,+0
__do_page_fault 1194 1178 -16,+0
do_exit 2995 3027 -43,+75
process_one_work 1008 989 -67,+48
finish_task_switch 524 505 -19,+0
__schedule_bug 103 98 -59,+54
__schedule_bug 103 98 -59,+54
__sched_setscheduler 2015 2030 +15,+0
freeze_processes 203 230 +31,-4
rcu_gp_kthread_wake 106 99 -7,+0
rcu_core 1841 1834 -7,+0
call_timer_fn 298 286 -12,+0
can_stop_idle_tick 146 139 -31,+24
perf_pending_event 253 239 -14,+0
shmem_alloc_page 209 213 +4,+0
__alloc_pages_slowpath 3284 3269 -15,+0
umount_tree 671 694 +23,+0
advance_transaction 803 798 -5,+0
con_put_char 71 51 -20,+0
xhci_urb_enqueue 1302 1295 -7,+0
xhci_urb_enqueue 1302 1295 -7,+0
tcp_sacktag_write_queue 2130 2075 -55,+0
tcp_try_undo_loss 229 208 -21,+0
tcp_v4_inbound_md5_hash 438 411 -31,+4
tcp_v4_inbound_md5_hash 438 411 -31,+4
tcp_v6_inbound_md5_hash 469 411 -33,-25
tcp_v6_inbound_md5_hash 469 411 -33,-25
restricted_pointer 434 420 -14,+0
irq_exit 162 154 -8,+0
get_perf_callchain 638 624 -14,+0
rt_mutex_trylock 169 156 -13,+0
avc_has_extended_perms 1092 1089 -3,+0
avc_has_perm_noaudit 309 306 -3,+0
__perf_sw_event 138 122 -16,+0
perf_swevent_get_recursion_context 116 102 -14,+0
__local_bh_enable_ip 93 72 -21,+0
xfrm_input 4175 4161 -14,+0
avc_has_perm 446 443 -3,+0
vm_events_fold_cpu 57 56 -1,+0
vfree 68 61 -7,+0
freeze_processes 203 230 +31,-4
_local_bh_enable 44 30 -14,+0
ip_do_fragment 1982 1944 -38,+0
do_exit 2995 3027 -43,+75
__do_softirq 742 724 -18,+0
cpu_init 1510 1489 -21,+0
account_system_time 80 79 -1,+0
total 12985281 12984819 -742,+280
Reported-by: Nadav Amit <nadav.amit@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20181206112433.GB13675@hirez.programming.kicks-ass.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-12-06 11:24:33 +00:00
|
|
|
asm qual ("addq %1, "__percpu_arg(0) \
|
2010-01-05 06:34:50 +00:00
|
|
|
: "+m" (var) \
|
|
|
|
|
: "re" ((pao_T__)(val))); \
|
|
|
|
|
break; \
|
|
|
|
|
default: __bad_percpu_size(); \
|
|
|
|
|
} \
|
|
|
|
|
} while (0)
|
|
|
|
|
|
x86/percpu: Differentiate this_cpu_{}() and __this_cpu_{}()
Nadav Amit reported that commit:
b59167ac7baf ("x86/percpu: Fix this_cpu_read()")
added a bunch of constraints to all sorts of code; and while some of
that was correct and desired, some of that seems superfluous.
The thing is, the this_cpu_*() operations are defined IRQ-safe, this
means the values are subject to change from IRQs, and thus must be
reloaded.
Also, the generic form:
local_irq_save()
__this_cpu_read()
local_irq_restore()
would not allow the re-use of previous values; if by nothing else,
then the barrier()s implied by local_irq_*().
Which raises the point that percpu_from_op() and the others also need
that volatile.
OTOH __this_cpu_*() operations are not IRQ-safe and assume external
preempt/IRQ disabling and could thus be allowed more room for
optimization.
This makes the this_cpu_*() vs __this_cpu_*() behaviour more
consistent with other architectures.
$ ./compare.sh defconfig-build defconfig-build1 vmlinux.o
x86_pmu_cancel_txn 80 71 -9,+0
__text_poke 919 964 +45,+0
do_user_addr_fault 1082 1058 -24,+0
__do_page_fault 1194 1178 -16,+0
do_exit 2995 3027 -43,+75
process_one_work 1008 989 -67,+48
finish_task_switch 524 505 -19,+0
__schedule_bug 103 98 -59,+54
__schedule_bug 103 98 -59,+54
__sched_setscheduler 2015 2030 +15,+0
freeze_processes 203 230 +31,-4
rcu_gp_kthread_wake 106 99 -7,+0
rcu_core 1841 1834 -7,+0
call_timer_fn 298 286 -12,+0
can_stop_idle_tick 146 139 -31,+24
perf_pending_event 253 239 -14,+0
shmem_alloc_page 209 213 +4,+0
__alloc_pages_slowpath 3284 3269 -15,+0
umount_tree 671 694 +23,+0
advance_transaction 803 798 -5,+0
con_put_char 71 51 -20,+0
xhci_urb_enqueue 1302 1295 -7,+0
xhci_urb_enqueue 1302 1295 -7,+0
tcp_sacktag_write_queue 2130 2075 -55,+0
tcp_try_undo_loss 229 208 -21,+0
tcp_v4_inbound_md5_hash 438 411 -31,+4
tcp_v4_inbound_md5_hash 438 411 -31,+4
tcp_v6_inbound_md5_hash 469 411 -33,-25
tcp_v6_inbound_md5_hash 469 411 -33,-25
restricted_pointer 434 420 -14,+0
irq_exit 162 154 -8,+0
get_perf_callchain 638 624 -14,+0
rt_mutex_trylock 169 156 -13,+0
avc_has_extended_perms 1092 1089 -3,+0
avc_has_perm_noaudit 309 306 -3,+0
__perf_sw_event 138 122 -16,+0
perf_swevent_get_recursion_context 116 102 -14,+0
__local_bh_enable_ip 93 72 -21,+0
xfrm_input 4175 4161 -14,+0
avc_has_perm 446 443 -3,+0
vm_events_fold_cpu 57 56 -1,+0
vfree 68 61 -7,+0
freeze_processes 203 230 +31,-4
_local_bh_enable 44 30 -14,+0
ip_do_fragment 1982 1944 -38,+0
do_exit 2995 3027 -43,+75
__do_softirq 742 724 -18,+0
cpu_init 1510 1489 -21,+0
account_system_time 80 79 -1,+0
total 12985281 12984819 -742,+280
Reported-by: Nadav Amit <nadav.amit@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20181206112433.GB13675@hirez.programming.kicks-ass.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-12-06 11:24:33 +00:00
|
|
|
#define percpu_from_op(qual, op, var) \
|
2008-03-23 08:03:06 +00:00
|
|
|
({ \
|
2009-10-29 13:34:12 +00:00
|
|
|
typeof(var) pfo_ret__; \
|
2008-03-23 08:03:06 +00:00
|
|
|
switch (sizeof(var)) { \
|
|
|
|
|
case 1: \
|
x86/percpu: Differentiate this_cpu_{}() and __this_cpu_{}()
Nadav Amit reported that commit:
b59167ac7baf ("x86/percpu: Fix this_cpu_read()")
added a bunch of constraints to all sorts of code; and while some of
that was correct and desired, some of that seems superfluous.
The thing is, the this_cpu_*() operations are defined IRQ-safe, this
means the values are subject to change from IRQs, and thus must be
reloaded.
Also, the generic form:
local_irq_save()
__this_cpu_read()
local_irq_restore()
would not allow the re-use of previous values; if by nothing else,
then the barrier()s implied by local_irq_*().
Which raises the point that percpu_from_op() and the others also need
that volatile.
OTOH __this_cpu_*() operations are not IRQ-safe and assume external
preempt/IRQ disabling and could thus be allowed more room for
optimization.
This makes the this_cpu_*() vs __this_cpu_*() behaviour more
consistent with other architectures.
$ ./compare.sh defconfig-build defconfig-build1 vmlinux.o
x86_pmu_cancel_txn 80 71 -9,+0
__text_poke 919 964 +45,+0
do_user_addr_fault 1082 1058 -24,+0
__do_page_fault 1194 1178 -16,+0
do_exit 2995 3027 -43,+75
process_one_work 1008 989 -67,+48
finish_task_switch 524 505 -19,+0
__schedule_bug 103 98 -59,+54
__schedule_bug 103 98 -59,+54
__sched_setscheduler 2015 2030 +15,+0
freeze_processes 203 230 +31,-4
rcu_gp_kthread_wake 106 99 -7,+0
rcu_core 1841 1834 -7,+0
call_timer_fn 298 286 -12,+0
can_stop_idle_tick 146 139 -31,+24
perf_pending_event 253 239 -14,+0
shmem_alloc_page 209 213 +4,+0
__alloc_pages_slowpath 3284 3269 -15,+0
umount_tree 671 694 +23,+0
advance_transaction 803 798 -5,+0
con_put_char 71 51 -20,+0
xhci_urb_enqueue 1302 1295 -7,+0
xhci_urb_enqueue 1302 1295 -7,+0
tcp_sacktag_write_queue 2130 2075 -55,+0
tcp_try_undo_loss 229 208 -21,+0
tcp_v4_inbound_md5_hash 438 411 -31,+4
tcp_v4_inbound_md5_hash 438 411 -31,+4
tcp_v6_inbound_md5_hash 469 411 -33,-25
tcp_v6_inbound_md5_hash 469 411 -33,-25
restricted_pointer 434 420 -14,+0
irq_exit 162 154 -8,+0
get_perf_callchain 638 624 -14,+0
rt_mutex_trylock 169 156 -13,+0
avc_has_extended_perms 1092 1089 -3,+0
avc_has_perm_noaudit 309 306 -3,+0
__perf_sw_event 138 122 -16,+0
perf_swevent_get_recursion_context 116 102 -14,+0
__local_bh_enable_ip 93 72 -21,+0
xfrm_input 4175 4161 -14,+0
avc_has_perm 446 443 -3,+0
vm_events_fold_cpu 57 56 -1,+0
vfree 68 61 -7,+0
freeze_processes 203 230 +31,-4
_local_bh_enable 44 30 -14,+0
ip_do_fragment 1982 1944 -38,+0
do_exit 2995 3027 -43,+75
__do_softirq 742 724 -18,+0
cpu_init 1510 1489 -21,+0
account_system_time 80 79 -1,+0
total 12985281 12984819 -742,+280
Reported-by: Nadav Amit <nadav.amit@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20181206112433.GB13675@hirez.programming.kicks-ass.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-12-06 11:24:33 +00:00
|
|
|
asm qual (op "b "__percpu_arg(1)",%0" \
|
2009-10-29 13:34:12 +00:00
|
|
|
: "=q" (pfo_ret__) \
|
2014-11-04 08:50:48 +00:00
|
|
|
: "m" (var)); \
|
2008-03-23 08:03:06 +00:00
|
|
|
break; \
|
|
|
|
|
case 2: \
|
x86/percpu: Differentiate this_cpu_{}() and __this_cpu_{}()
Nadav Amit reported that commit:
b59167ac7baf ("x86/percpu: Fix this_cpu_read()")
added a bunch of constraints to all sorts of code; and while some of
that was correct and desired, some of that seems superfluous.
The thing is, the this_cpu_*() operations are defined IRQ-safe, this
means the values are subject to change from IRQs, and thus must be
reloaded.
Also, the generic form:
local_irq_save()
__this_cpu_read()
local_irq_restore()
would not allow the re-use of previous values; if by nothing else,
then the barrier()s implied by local_irq_*().
Which raises the point that percpu_from_op() and the others also need
that volatile.
OTOH __this_cpu_*() operations are not IRQ-safe and assume external
preempt/IRQ disabling and could thus be allowed more room for
optimization.
This makes the this_cpu_*() vs __this_cpu_*() behaviour more
consistent with other architectures.
$ ./compare.sh defconfig-build defconfig-build1 vmlinux.o
x86_pmu_cancel_txn 80 71 -9,+0
__text_poke 919 964 +45,+0
do_user_addr_fault 1082 1058 -24,+0
__do_page_fault 1194 1178 -16,+0
do_exit 2995 3027 -43,+75
process_one_work 1008 989 -67,+48
finish_task_switch 524 505 -19,+0
__schedule_bug 103 98 -59,+54
__schedule_bug 103 98 -59,+54
__sched_setscheduler 2015 2030 +15,+0
freeze_processes 203 230 +31,-4
rcu_gp_kthread_wake 106 99 -7,+0
rcu_core 1841 1834 -7,+0
call_timer_fn 298 286 -12,+0
can_stop_idle_tick 146 139 -31,+24
perf_pending_event 253 239 -14,+0
shmem_alloc_page 209 213 +4,+0
__alloc_pages_slowpath 3284 3269 -15,+0
umount_tree 671 694 +23,+0
advance_transaction 803 798 -5,+0
con_put_char 71 51 -20,+0
xhci_urb_enqueue 1302 1295 -7,+0
xhci_urb_enqueue 1302 1295 -7,+0
tcp_sacktag_write_queue 2130 2075 -55,+0
tcp_try_undo_loss 229 208 -21,+0
tcp_v4_inbound_md5_hash 438 411 -31,+4
tcp_v4_inbound_md5_hash 438 411 -31,+4
tcp_v6_inbound_md5_hash 469 411 -33,-25
tcp_v6_inbound_md5_hash 469 411 -33,-25
restricted_pointer 434 420 -14,+0
irq_exit 162 154 -8,+0
get_perf_callchain 638 624 -14,+0
rt_mutex_trylock 169 156 -13,+0
avc_has_extended_perms 1092 1089 -3,+0
avc_has_perm_noaudit 309 306 -3,+0
__perf_sw_event 138 122 -16,+0
perf_swevent_get_recursion_context 116 102 -14,+0
__local_bh_enable_ip 93 72 -21,+0
xfrm_input 4175 4161 -14,+0
avc_has_perm 446 443 -3,+0
vm_events_fold_cpu 57 56 -1,+0
vfree 68 61 -7,+0
freeze_processes 203 230 +31,-4
_local_bh_enable 44 30 -14,+0
ip_do_fragment 1982 1944 -38,+0
do_exit 2995 3027 -43,+75
__do_softirq 742 724 -18,+0
cpu_init 1510 1489 -21,+0
account_system_time 80 79 -1,+0
total 12985281 12984819 -742,+280
Reported-by: Nadav Amit <nadav.amit@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20181206112433.GB13675@hirez.programming.kicks-ass.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-12-06 11:24:33 +00:00
|
|
|
asm qual (op "w "__percpu_arg(1)",%0" \
|
2009-10-29 13:34:12 +00:00
|
|
|
: "=r" (pfo_ret__) \
|
2014-11-04 08:50:48 +00:00
|
|
|
: "m" (var)); \
|
2008-03-23 08:03:06 +00:00
|
|
|
break; \
|
|
|
|
|
case 4: \
|
x86/percpu: Differentiate this_cpu_{}() and __this_cpu_{}()
Nadav Amit reported that commit:
b59167ac7baf ("x86/percpu: Fix this_cpu_read()")
added a bunch of constraints to all sorts of code; and while some of
that was correct and desired, some of that seems superfluous.
The thing is, the this_cpu_*() operations are defined IRQ-safe, this
means the values are subject to change from IRQs, and thus must be
reloaded.
Also, the generic form:
local_irq_save()
__this_cpu_read()
local_irq_restore()
would not allow the re-use of previous values; if by nothing else,
then the barrier()s implied by local_irq_*().
Which raises the point that percpu_from_op() and the others also need
that volatile.
OTOH __this_cpu_*() operations are not IRQ-safe and assume external
preempt/IRQ disabling and could thus be allowed more room for
optimization.
This makes the this_cpu_*() vs __this_cpu_*() behaviour more
consistent with other architectures.
$ ./compare.sh defconfig-build defconfig-build1 vmlinux.o
x86_pmu_cancel_txn 80 71 -9,+0
__text_poke 919 964 +45,+0
do_user_addr_fault 1082 1058 -24,+0
__do_page_fault 1194 1178 -16,+0
do_exit 2995 3027 -43,+75
process_one_work 1008 989 -67,+48
finish_task_switch 524 505 -19,+0
__schedule_bug 103 98 -59,+54
__schedule_bug 103 98 -59,+54
__sched_setscheduler 2015 2030 +15,+0
freeze_processes 203 230 +31,-4
rcu_gp_kthread_wake 106 99 -7,+0
rcu_core 1841 1834 -7,+0
call_timer_fn 298 286 -12,+0
can_stop_idle_tick 146 139 -31,+24
perf_pending_event 253 239 -14,+0
shmem_alloc_page 209 213 +4,+0
__alloc_pages_slowpath 3284 3269 -15,+0
umount_tree 671 694 +23,+0
advance_transaction 803 798 -5,+0
con_put_char 71 51 -20,+0
xhci_urb_enqueue 1302 1295 -7,+0
xhci_urb_enqueue 1302 1295 -7,+0
tcp_sacktag_write_queue 2130 2075 -55,+0
tcp_try_undo_loss 229 208 -21,+0
tcp_v4_inbound_md5_hash 438 411 -31,+4
tcp_v4_inbound_md5_hash 438 411 -31,+4
tcp_v6_inbound_md5_hash 469 411 -33,-25
tcp_v6_inbound_md5_hash 469 411 -33,-25
restricted_pointer 434 420 -14,+0
irq_exit 162 154 -8,+0
get_perf_callchain 638 624 -14,+0
rt_mutex_trylock 169 156 -13,+0
avc_has_extended_perms 1092 1089 -3,+0
avc_has_perm_noaudit 309 306 -3,+0
__perf_sw_event 138 122 -16,+0
perf_swevent_get_recursion_context 116 102 -14,+0
__local_bh_enable_ip 93 72 -21,+0
xfrm_input 4175 4161 -14,+0
avc_has_perm 446 443 -3,+0
vm_events_fold_cpu 57 56 -1,+0
vfree 68 61 -7,+0
freeze_processes 203 230 +31,-4
_local_bh_enable 44 30 -14,+0
ip_do_fragment 1982 1944 -38,+0
do_exit 2995 3027 -43,+75
__do_softirq 742 724 -18,+0
cpu_init 1510 1489 -21,+0
account_system_time 80 79 -1,+0
total 12985281 12984819 -742,+280
Reported-by: Nadav Amit <nadav.amit@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20181206112433.GB13675@hirez.programming.kicks-ass.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-12-06 11:24:33 +00:00
|
|
|
asm qual (op "l "__percpu_arg(1)",%0" \
|
2009-10-29 13:34:12 +00:00
|
|
|
: "=r" (pfo_ret__) \
|
2014-11-04 08:50:48 +00:00
|
|
|
: "m" (var)); \
|
2009-01-13 11:41:35 +00:00
|
|
|
break; \
|
|
|
|
|
case 8: \
|
x86/percpu: Differentiate this_cpu_{}() and __this_cpu_{}()
Nadav Amit reported that commit:
b59167ac7baf ("x86/percpu: Fix this_cpu_read()")
added a bunch of constraints to all sorts of code; and while some of
that was correct and desired, some of that seems superfluous.
The thing is, the this_cpu_*() operations are defined IRQ-safe, this
means the values are subject to change from IRQs, and thus must be
reloaded.
Also, the generic form:
local_irq_save()
__this_cpu_read()
local_irq_restore()
would not allow the re-use of previous values; if by nothing else,
then the barrier()s implied by local_irq_*().
Which raises the point that percpu_from_op() and the others also need
that volatile.
OTOH __this_cpu_*() operations are not IRQ-safe and assume external
preempt/IRQ disabling and could thus be allowed more room for
optimization.
This makes the this_cpu_*() vs __this_cpu_*() behaviour more
consistent with other architectures.
$ ./compare.sh defconfig-build defconfig-build1 vmlinux.o
x86_pmu_cancel_txn 80 71 -9,+0
__text_poke 919 964 +45,+0
do_user_addr_fault 1082 1058 -24,+0
__do_page_fault 1194 1178 -16,+0
do_exit 2995 3027 -43,+75
process_one_work 1008 989 -67,+48
finish_task_switch 524 505 -19,+0
__schedule_bug 103 98 -59,+54
__schedule_bug 103 98 -59,+54
__sched_setscheduler 2015 2030 +15,+0
freeze_processes 203 230 +31,-4
rcu_gp_kthread_wake 106 99 -7,+0
rcu_core 1841 1834 -7,+0
call_timer_fn 298 286 -12,+0
can_stop_idle_tick 146 139 -31,+24
perf_pending_event 253 239 -14,+0
shmem_alloc_page 209 213 +4,+0
__alloc_pages_slowpath 3284 3269 -15,+0
umount_tree 671 694 +23,+0
advance_transaction 803 798 -5,+0
con_put_char 71 51 -20,+0
xhci_urb_enqueue 1302 1295 -7,+0
xhci_urb_enqueue 1302 1295 -7,+0
tcp_sacktag_write_queue 2130 2075 -55,+0
tcp_try_undo_loss 229 208 -21,+0
tcp_v4_inbound_md5_hash 438 411 -31,+4
tcp_v4_inbound_md5_hash 438 411 -31,+4
tcp_v6_inbound_md5_hash 469 411 -33,-25
tcp_v6_inbound_md5_hash 469 411 -33,-25
restricted_pointer 434 420 -14,+0
irq_exit 162 154 -8,+0
get_perf_callchain 638 624 -14,+0
rt_mutex_trylock 169 156 -13,+0
avc_has_extended_perms 1092 1089 -3,+0
avc_has_perm_noaudit 309 306 -3,+0
__perf_sw_event 138 122 -16,+0
perf_swevent_get_recursion_context 116 102 -14,+0
__local_bh_enable_ip 93 72 -21,+0
xfrm_input 4175 4161 -14,+0
avc_has_perm 446 443 -3,+0
vm_events_fold_cpu 57 56 -1,+0
vfree 68 61 -7,+0
freeze_processes 203 230 +31,-4
_local_bh_enable 44 30 -14,+0
ip_do_fragment 1982 1944 -38,+0
do_exit 2995 3027 -43,+75
__do_softirq 742 724 -18,+0
cpu_init 1510 1489 -21,+0
account_system_time 80 79 -1,+0
total 12985281 12984819 -742,+280
Reported-by: Nadav Amit <nadav.amit@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20181206112433.GB13675@hirez.programming.kicks-ass.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-12-06 11:24:33 +00:00
|
|
|
asm qual (op "q "__percpu_arg(1)",%0" \
|
2009-10-29 13:34:12 +00:00
|
|
|
: "=r" (pfo_ret__) \
|
2014-11-04 08:50:48 +00:00
|
|
|
: "m" (var)); \
|
|
|
|
|
break; \
|
|
|
|
|
default: __bad_percpu_size(); \
|
|
|
|
|
} \
|
|
|
|
|
pfo_ret__; \
|
|
|
|
|
})
|
|
|
|
|
|
|
|
|
|
#define percpu_stable_op(op, var) \
|
|
|
|
|
({ \
|
|
|
|
|
typeof(var) pfo_ret__; \
|
|
|
|
|
switch (sizeof(var)) { \
|
|
|
|
|
case 1: \
|
|
|
|
|
asm(op "b "__percpu_arg(P1)",%0" \
|
|
|
|
|
: "=q" (pfo_ret__) \
|
|
|
|
|
: "p" (&(var))); \
|
|
|
|
|
break; \
|
|
|
|
|
case 2: \
|
|
|
|
|
asm(op "w "__percpu_arg(P1)",%0" \
|
|
|
|
|
: "=r" (pfo_ret__) \
|
|
|
|
|
: "p" (&(var))); \
|
|
|
|
|
break; \
|
|
|
|
|
case 4: \
|
|
|
|
|
asm(op "l "__percpu_arg(P1)",%0" \
|
|
|
|
|
: "=r" (pfo_ret__) \
|
|
|
|
|
: "p" (&(var))); \
|
|
|
|
|
break; \
|
|
|
|
|
case 8: \
|
|
|
|
|
asm(op "q "__percpu_arg(P1)",%0" \
|
|
|
|
|
: "=r" (pfo_ret__) \
|
|
|
|
|
: "p" (&(var))); \
|
2008-03-23 08:03:06 +00:00
|
|
|
break; \
|
|
|
|
|
default: __bad_percpu_size(); \
|
|
|
|
|
} \
|
2009-10-29 13:34:12 +00:00
|
|
|
pfo_ret__; \
|
2008-03-23 08:03:06 +00:00
|
|
|
})
|
2008-01-30 12:32:53 +00:00
|
|
|
|
x86/percpu: Differentiate this_cpu_{}() and __this_cpu_{}()
Nadav Amit reported that commit:
b59167ac7baf ("x86/percpu: Fix this_cpu_read()")
added a bunch of constraints to all sorts of code; and while some of
that was correct and desired, some of that seems superfluous.
The thing is, the this_cpu_*() operations are defined IRQ-safe, this
means the values are subject to change from IRQs, and thus must be
reloaded.
Also, the generic form:
local_irq_save()
__this_cpu_read()
local_irq_restore()
would not allow the re-use of previous values; if by nothing else,
then the barrier()s implied by local_irq_*().
Which raises the point that percpu_from_op() and the others also need
that volatile.
OTOH __this_cpu_*() operations are not IRQ-safe and assume external
preempt/IRQ disabling and could thus be allowed more room for
optimization.
This makes the this_cpu_*() vs __this_cpu_*() behaviour more
consistent with other architectures.
$ ./compare.sh defconfig-build defconfig-build1 vmlinux.o
x86_pmu_cancel_txn 80 71 -9,+0
__text_poke 919 964 +45,+0
do_user_addr_fault 1082 1058 -24,+0
__do_page_fault 1194 1178 -16,+0
do_exit 2995 3027 -43,+75
process_one_work 1008 989 -67,+48
finish_task_switch 524 505 -19,+0
__schedule_bug 103 98 -59,+54
__schedule_bug 103 98 -59,+54
__sched_setscheduler 2015 2030 +15,+0
freeze_processes 203 230 +31,-4
rcu_gp_kthread_wake 106 99 -7,+0
rcu_core 1841 1834 -7,+0
call_timer_fn 298 286 -12,+0
can_stop_idle_tick 146 139 -31,+24
perf_pending_event 253 239 -14,+0
shmem_alloc_page 209 213 +4,+0
__alloc_pages_slowpath 3284 3269 -15,+0
umount_tree 671 694 +23,+0
advance_transaction 803 798 -5,+0
con_put_char 71 51 -20,+0
xhci_urb_enqueue 1302 1295 -7,+0
xhci_urb_enqueue 1302 1295 -7,+0
tcp_sacktag_write_queue 2130 2075 -55,+0
tcp_try_undo_loss 229 208 -21,+0
tcp_v4_inbound_md5_hash 438 411 -31,+4
tcp_v4_inbound_md5_hash 438 411 -31,+4
tcp_v6_inbound_md5_hash 469 411 -33,-25
tcp_v6_inbound_md5_hash 469 411 -33,-25
restricted_pointer 434 420 -14,+0
irq_exit 162 154 -8,+0
get_perf_callchain 638 624 -14,+0
rt_mutex_trylock 169 156 -13,+0
avc_has_extended_perms 1092 1089 -3,+0
avc_has_perm_noaudit 309 306 -3,+0
__perf_sw_event 138 122 -16,+0
perf_swevent_get_recursion_context 116 102 -14,+0
__local_bh_enable_ip 93 72 -21,+0
xfrm_input 4175 4161 -14,+0
avc_has_perm 446 443 -3,+0
vm_events_fold_cpu 57 56 -1,+0
vfree 68 61 -7,+0
freeze_processes 203 230 +31,-4
_local_bh_enable 44 30 -14,+0
ip_do_fragment 1982 1944 -38,+0
do_exit 2995 3027 -43,+75
__do_softirq 742 724 -18,+0
cpu_init 1510 1489 -21,+0
account_system_time 80 79 -1,+0
total 12985281 12984819 -742,+280
Reported-by: Nadav Amit <nadav.amit@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20181206112433.GB13675@hirez.programming.kicks-ass.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-12-06 11:24:33 +00:00
|
|
|
#define percpu_unary_op(qual, op, var) \
|
2010-04-21 14:21:51 +00:00
|
|
|
({ \
|
|
|
|
|
switch (sizeof(var)) { \
|
|
|
|
|
case 1: \
|
x86/percpu: Differentiate this_cpu_{}() and __this_cpu_{}()
Nadav Amit reported that commit:
b59167ac7baf ("x86/percpu: Fix this_cpu_read()")
added a bunch of constraints to all sorts of code; and while some of
that was correct and desired, some of that seems superfluous.
The thing is, the this_cpu_*() operations are defined IRQ-safe, this
means the values are subject to change from IRQs, and thus must be
reloaded.
Also, the generic form:
local_irq_save()
__this_cpu_read()
local_irq_restore()
would not allow the re-use of previous values; if by nothing else,
then the barrier()s implied by local_irq_*().
Which raises the point that percpu_from_op() and the others also need
that volatile.
OTOH __this_cpu_*() operations are not IRQ-safe and assume external
preempt/IRQ disabling and could thus be allowed more room for
optimization.
This makes the this_cpu_*() vs __this_cpu_*() behaviour more
consistent with other architectures.
$ ./compare.sh defconfig-build defconfig-build1 vmlinux.o
x86_pmu_cancel_txn 80 71 -9,+0
__text_poke 919 964 +45,+0
do_user_addr_fault 1082 1058 -24,+0
__do_page_fault 1194 1178 -16,+0
do_exit 2995 3027 -43,+75
process_one_work 1008 989 -67,+48
finish_task_switch 524 505 -19,+0
__schedule_bug 103 98 -59,+54
__schedule_bug 103 98 -59,+54
__sched_setscheduler 2015 2030 +15,+0
freeze_processes 203 230 +31,-4
rcu_gp_kthread_wake 106 99 -7,+0
rcu_core 1841 1834 -7,+0
call_timer_fn 298 286 -12,+0
can_stop_idle_tick 146 139 -31,+24
perf_pending_event 253 239 -14,+0
shmem_alloc_page 209 213 +4,+0
__alloc_pages_slowpath 3284 3269 -15,+0
umount_tree 671 694 +23,+0
advance_transaction 803 798 -5,+0
con_put_char 71 51 -20,+0
xhci_urb_enqueue 1302 1295 -7,+0
xhci_urb_enqueue 1302 1295 -7,+0
tcp_sacktag_write_queue 2130 2075 -55,+0
tcp_try_undo_loss 229 208 -21,+0
tcp_v4_inbound_md5_hash 438 411 -31,+4
tcp_v4_inbound_md5_hash 438 411 -31,+4
tcp_v6_inbound_md5_hash 469 411 -33,-25
tcp_v6_inbound_md5_hash 469 411 -33,-25
restricted_pointer 434 420 -14,+0
irq_exit 162 154 -8,+0
get_perf_callchain 638 624 -14,+0
rt_mutex_trylock 169 156 -13,+0
avc_has_extended_perms 1092 1089 -3,+0
avc_has_perm_noaudit 309 306 -3,+0
__perf_sw_event 138 122 -16,+0
perf_swevent_get_recursion_context 116 102 -14,+0
__local_bh_enable_ip 93 72 -21,+0
xfrm_input 4175 4161 -14,+0
avc_has_perm 446 443 -3,+0
vm_events_fold_cpu 57 56 -1,+0
vfree 68 61 -7,+0
freeze_processes 203 230 +31,-4
_local_bh_enable 44 30 -14,+0
ip_do_fragment 1982 1944 -38,+0
do_exit 2995 3027 -43,+75
__do_softirq 742 724 -18,+0
cpu_init 1510 1489 -21,+0
account_system_time 80 79 -1,+0
total 12985281 12984819 -742,+280
Reported-by: Nadav Amit <nadav.amit@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20181206112433.GB13675@hirez.programming.kicks-ass.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-12-06 11:24:33 +00:00
|
|
|
asm qual (op "b "__percpu_arg(0) \
|
2010-04-21 14:21:51 +00:00
|
|
|
: "+m" (var)); \
|
|
|
|
|
break; \
|
|
|
|
|
case 2: \
|
x86/percpu: Differentiate this_cpu_{}() and __this_cpu_{}()
Nadav Amit reported that commit:
b59167ac7baf ("x86/percpu: Fix this_cpu_read()")
added a bunch of constraints to all sorts of code; and while some of
that was correct and desired, some of that seems superfluous.
The thing is, the this_cpu_*() operations are defined IRQ-safe, this
means the values are subject to change from IRQs, and thus must be
reloaded.
Also, the generic form:
local_irq_save()
__this_cpu_read()
local_irq_restore()
would not allow the re-use of previous values; if by nothing else,
then the barrier()s implied by local_irq_*().
Which raises the point that percpu_from_op() and the others also need
that volatile.
OTOH __this_cpu_*() operations are not IRQ-safe and assume external
preempt/IRQ disabling and could thus be allowed more room for
optimization.
This makes the this_cpu_*() vs __this_cpu_*() behaviour more
consistent with other architectures.
$ ./compare.sh defconfig-build defconfig-build1 vmlinux.o
x86_pmu_cancel_txn 80 71 -9,+0
__text_poke 919 964 +45,+0
do_user_addr_fault 1082 1058 -24,+0
__do_page_fault 1194 1178 -16,+0
do_exit 2995 3027 -43,+75
process_one_work 1008 989 -67,+48
finish_task_switch 524 505 -19,+0
__schedule_bug 103 98 -59,+54
__schedule_bug 103 98 -59,+54
__sched_setscheduler 2015 2030 +15,+0
freeze_processes 203 230 +31,-4
rcu_gp_kthread_wake 106 99 -7,+0
rcu_core 1841 1834 -7,+0
call_timer_fn 298 286 -12,+0
can_stop_idle_tick 146 139 -31,+24
perf_pending_event 253 239 -14,+0
shmem_alloc_page 209 213 +4,+0
__alloc_pages_slowpath 3284 3269 -15,+0
umount_tree 671 694 +23,+0
advance_transaction 803 798 -5,+0
con_put_char 71 51 -20,+0
xhci_urb_enqueue 1302 1295 -7,+0
xhci_urb_enqueue 1302 1295 -7,+0
tcp_sacktag_write_queue 2130 2075 -55,+0
tcp_try_undo_loss 229 208 -21,+0
tcp_v4_inbound_md5_hash 438 411 -31,+4
tcp_v4_inbound_md5_hash 438 411 -31,+4
tcp_v6_inbound_md5_hash 469 411 -33,-25
tcp_v6_inbound_md5_hash 469 411 -33,-25
restricted_pointer 434 420 -14,+0
irq_exit 162 154 -8,+0
get_perf_callchain 638 624 -14,+0
rt_mutex_trylock 169 156 -13,+0
avc_has_extended_perms 1092 1089 -3,+0
avc_has_perm_noaudit 309 306 -3,+0
__perf_sw_event 138 122 -16,+0
perf_swevent_get_recursion_context 116 102 -14,+0
__local_bh_enable_ip 93 72 -21,+0
xfrm_input 4175 4161 -14,+0
avc_has_perm 446 443 -3,+0
vm_events_fold_cpu 57 56 -1,+0
vfree 68 61 -7,+0
freeze_processes 203 230 +31,-4
_local_bh_enable 44 30 -14,+0
ip_do_fragment 1982 1944 -38,+0
do_exit 2995 3027 -43,+75
__do_softirq 742 724 -18,+0
cpu_init 1510 1489 -21,+0
account_system_time 80 79 -1,+0
total 12985281 12984819 -742,+280
Reported-by: Nadav Amit <nadav.amit@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20181206112433.GB13675@hirez.programming.kicks-ass.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-12-06 11:24:33 +00:00
|
|
|
asm qual (op "w "__percpu_arg(0) \
|
2010-04-21 14:21:51 +00:00
|
|
|
: "+m" (var)); \
|
|
|
|
|
break; \
|
|
|
|
|
case 4: \
|
x86/percpu: Differentiate this_cpu_{}() and __this_cpu_{}()
Nadav Amit reported that commit:
b59167ac7baf ("x86/percpu: Fix this_cpu_read()")
added a bunch of constraints to all sorts of code; and while some of
that was correct and desired, some of that seems superfluous.
The thing is, the this_cpu_*() operations are defined IRQ-safe, this
means the values are subject to change from IRQs, and thus must be
reloaded.
Also, the generic form:
local_irq_save()
__this_cpu_read()
local_irq_restore()
would not allow the re-use of previous values; if by nothing else,
then the barrier()s implied by local_irq_*().
Which raises the point that percpu_from_op() and the others also need
that volatile.
OTOH __this_cpu_*() operations are not IRQ-safe and assume external
preempt/IRQ disabling and could thus be allowed more room for
optimization.
This makes the this_cpu_*() vs __this_cpu_*() behaviour more
consistent with other architectures.
$ ./compare.sh defconfig-build defconfig-build1 vmlinux.o
x86_pmu_cancel_txn 80 71 -9,+0
__text_poke 919 964 +45,+0
do_user_addr_fault 1082 1058 -24,+0
__do_page_fault 1194 1178 -16,+0
do_exit 2995 3027 -43,+75
process_one_work 1008 989 -67,+48
finish_task_switch 524 505 -19,+0
__schedule_bug 103 98 -59,+54
__schedule_bug 103 98 -59,+54
__sched_setscheduler 2015 2030 +15,+0
freeze_processes 203 230 +31,-4
rcu_gp_kthread_wake 106 99 -7,+0
rcu_core 1841 1834 -7,+0
call_timer_fn 298 286 -12,+0
can_stop_idle_tick 146 139 -31,+24
perf_pending_event 253 239 -14,+0
shmem_alloc_page 209 213 +4,+0
__alloc_pages_slowpath 3284 3269 -15,+0
umount_tree 671 694 +23,+0
advance_transaction 803 798 -5,+0
con_put_char 71 51 -20,+0
xhci_urb_enqueue 1302 1295 -7,+0
xhci_urb_enqueue 1302 1295 -7,+0
tcp_sacktag_write_queue 2130 2075 -55,+0
tcp_try_undo_loss 229 208 -21,+0
tcp_v4_inbound_md5_hash 438 411 -31,+4
tcp_v4_inbound_md5_hash 438 411 -31,+4
tcp_v6_inbound_md5_hash 469 411 -33,-25
tcp_v6_inbound_md5_hash 469 411 -33,-25
restricted_pointer 434 420 -14,+0
irq_exit 162 154 -8,+0
get_perf_callchain 638 624 -14,+0
rt_mutex_trylock 169 156 -13,+0
avc_has_extended_perms 1092 1089 -3,+0
avc_has_perm_noaudit 309 306 -3,+0
__perf_sw_event 138 122 -16,+0
perf_swevent_get_recursion_context 116 102 -14,+0
__local_bh_enable_ip 93 72 -21,+0
xfrm_input 4175 4161 -14,+0
avc_has_perm 446 443 -3,+0
vm_events_fold_cpu 57 56 -1,+0
vfree 68 61 -7,+0
freeze_processes 203 230 +31,-4
_local_bh_enable 44 30 -14,+0
ip_do_fragment 1982 1944 -38,+0
do_exit 2995 3027 -43,+75
__do_softirq 742 724 -18,+0
cpu_init 1510 1489 -21,+0
account_system_time 80 79 -1,+0
total 12985281 12984819 -742,+280
Reported-by: Nadav Amit <nadav.amit@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20181206112433.GB13675@hirez.programming.kicks-ass.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-12-06 11:24:33 +00:00
|
|
|
asm qual (op "l "__percpu_arg(0) \
|
2010-04-21 14:21:51 +00:00
|
|
|
: "+m" (var)); \
|
|
|
|
|
break; \
|
|
|
|
|
case 8: \
|
x86/percpu: Differentiate this_cpu_{}() and __this_cpu_{}()
Nadav Amit reported that commit:
b59167ac7baf ("x86/percpu: Fix this_cpu_read()")
added a bunch of constraints to all sorts of code; and while some of
that was correct and desired, some of that seems superfluous.
The thing is, the this_cpu_*() operations are defined IRQ-safe, this
means the values are subject to change from IRQs, and thus must be
reloaded.
Also, the generic form:
local_irq_save()
__this_cpu_read()
local_irq_restore()
would not allow the re-use of previous values; if by nothing else,
then the barrier()s implied by local_irq_*().
Which raises the point that percpu_from_op() and the others also need
that volatile.
OTOH __this_cpu_*() operations are not IRQ-safe and assume external
preempt/IRQ disabling and could thus be allowed more room for
optimization.
This makes the this_cpu_*() vs __this_cpu_*() behaviour more
consistent with other architectures.
$ ./compare.sh defconfig-build defconfig-build1 vmlinux.o
x86_pmu_cancel_txn 80 71 -9,+0
__text_poke 919 964 +45,+0
do_user_addr_fault 1082 1058 -24,+0
__do_page_fault 1194 1178 -16,+0
do_exit 2995 3027 -43,+75
process_one_work 1008 989 -67,+48
finish_task_switch 524 505 -19,+0
__schedule_bug 103 98 -59,+54
__schedule_bug 103 98 -59,+54
__sched_setscheduler 2015 2030 +15,+0
freeze_processes 203 230 +31,-4
rcu_gp_kthread_wake 106 99 -7,+0
rcu_core 1841 1834 -7,+0
call_timer_fn 298 286 -12,+0
can_stop_idle_tick 146 139 -31,+24
perf_pending_event 253 239 -14,+0
shmem_alloc_page 209 213 +4,+0
__alloc_pages_slowpath 3284 3269 -15,+0
umount_tree 671 694 +23,+0
advance_transaction 803 798 -5,+0
con_put_char 71 51 -20,+0
xhci_urb_enqueue 1302 1295 -7,+0
xhci_urb_enqueue 1302 1295 -7,+0
tcp_sacktag_write_queue 2130 2075 -55,+0
tcp_try_undo_loss 229 208 -21,+0
tcp_v4_inbound_md5_hash 438 411 -31,+4
tcp_v4_inbound_md5_hash 438 411 -31,+4
tcp_v6_inbound_md5_hash 469 411 -33,-25
tcp_v6_inbound_md5_hash 469 411 -33,-25
restricted_pointer 434 420 -14,+0
irq_exit 162 154 -8,+0
get_perf_callchain 638 624 -14,+0
rt_mutex_trylock 169 156 -13,+0
avc_has_extended_perms 1092 1089 -3,+0
avc_has_perm_noaudit 309 306 -3,+0
__perf_sw_event 138 122 -16,+0
perf_swevent_get_recursion_context 116 102 -14,+0
__local_bh_enable_ip 93 72 -21,+0
xfrm_input 4175 4161 -14,+0
avc_has_perm 446 443 -3,+0
vm_events_fold_cpu 57 56 -1,+0
vfree 68 61 -7,+0
freeze_processes 203 230 +31,-4
_local_bh_enable 44 30 -14,+0
ip_do_fragment 1982 1944 -38,+0
do_exit 2995 3027 -43,+75
__do_softirq 742 724 -18,+0
cpu_init 1510 1489 -21,+0
account_system_time 80 79 -1,+0
total 12985281 12984819 -742,+280
Reported-by: Nadav Amit <nadav.amit@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20181206112433.GB13675@hirez.programming.kicks-ass.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-12-06 11:24:33 +00:00
|
|
|
asm qual (op "q "__percpu_arg(0) \
|
2010-04-21 14:21:51 +00:00
|
|
|
: "+m" (var)); \
|
|
|
|
|
break; \
|
|
|
|
|
default: __bad_percpu_size(); \
|
|
|
|
|
} \
|
|
|
|
|
})
|
|
|
|
|
|
2010-12-17 14:47:04 +00:00
|
|
|
/*
|
|
|
|
|
* Add return operation
|
|
|
|
|
*/
|
x86/percpu: Differentiate this_cpu_{}() and __this_cpu_{}()
Nadav Amit reported that commit:
b59167ac7baf ("x86/percpu: Fix this_cpu_read()")
added a bunch of constraints to all sorts of code; and while some of
that was correct and desired, some of that seems superfluous.
The thing is, the this_cpu_*() operations are defined IRQ-safe, this
means the values are subject to change from IRQs, and thus must be
reloaded.
Also, the generic form:
local_irq_save()
__this_cpu_read()
local_irq_restore()
would not allow the re-use of previous values; if by nothing else,
then the barrier()s implied by local_irq_*().
Which raises the point that percpu_from_op() and the others also need
that volatile.
OTOH __this_cpu_*() operations are not IRQ-safe and assume external
preempt/IRQ disabling and could thus be allowed more room for
optimization.
This makes the this_cpu_*() vs __this_cpu_*() behaviour more
consistent with other architectures.
$ ./compare.sh defconfig-build defconfig-build1 vmlinux.o
x86_pmu_cancel_txn 80 71 -9,+0
__text_poke 919 964 +45,+0
do_user_addr_fault 1082 1058 -24,+0
__do_page_fault 1194 1178 -16,+0
do_exit 2995 3027 -43,+75
process_one_work 1008 989 -67,+48
finish_task_switch 524 505 -19,+0
__schedule_bug 103 98 -59,+54
__schedule_bug 103 98 -59,+54
__sched_setscheduler 2015 2030 +15,+0
freeze_processes 203 230 +31,-4
rcu_gp_kthread_wake 106 99 -7,+0
rcu_core 1841 1834 -7,+0
call_timer_fn 298 286 -12,+0
can_stop_idle_tick 146 139 -31,+24
perf_pending_event 253 239 -14,+0
shmem_alloc_page 209 213 +4,+0
__alloc_pages_slowpath 3284 3269 -15,+0
umount_tree 671 694 +23,+0
advance_transaction 803 798 -5,+0
con_put_char 71 51 -20,+0
xhci_urb_enqueue 1302 1295 -7,+0
xhci_urb_enqueue 1302 1295 -7,+0
tcp_sacktag_write_queue 2130 2075 -55,+0
tcp_try_undo_loss 229 208 -21,+0
tcp_v4_inbound_md5_hash 438 411 -31,+4
tcp_v4_inbound_md5_hash 438 411 -31,+4
tcp_v6_inbound_md5_hash 469 411 -33,-25
tcp_v6_inbound_md5_hash 469 411 -33,-25
restricted_pointer 434 420 -14,+0
irq_exit 162 154 -8,+0
get_perf_callchain 638 624 -14,+0
rt_mutex_trylock 169 156 -13,+0
avc_has_extended_perms 1092 1089 -3,+0
avc_has_perm_noaudit 309 306 -3,+0
__perf_sw_event 138 122 -16,+0
perf_swevent_get_recursion_context 116 102 -14,+0
__local_bh_enable_ip 93 72 -21,+0
xfrm_input 4175 4161 -14,+0
avc_has_perm 446 443 -3,+0
vm_events_fold_cpu 57 56 -1,+0
vfree 68 61 -7,+0
freeze_processes 203 230 +31,-4
_local_bh_enable 44 30 -14,+0
ip_do_fragment 1982 1944 -38,+0
do_exit 2995 3027 -43,+75
__do_softirq 742 724 -18,+0
cpu_init 1510 1489 -21,+0
account_system_time 80 79 -1,+0
total 12985281 12984819 -742,+280
Reported-by: Nadav Amit <nadav.amit@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20181206112433.GB13675@hirez.programming.kicks-ass.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-12-06 11:24:33 +00:00
|
|
|
#define percpu_add_return_op(qual, var, val) \
|
2010-12-17 14:47:04 +00:00
|
|
|
({ \
|
|
|
|
|
typeof(var) paro_ret__ = val; \
|
|
|
|
|
switch (sizeof(var)) { \
|
|
|
|
|
case 1: \
|
x86/percpu: Differentiate this_cpu_{}() and __this_cpu_{}()
Nadav Amit reported that commit:
b59167ac7baf ("x86/percpu: Fix this_cpu_read()")
added a bunch of constraints to all sorts of code; and while some of
that was correct and desired, some of that seems superfluous.
The thing is, the this_cpu_*() operations are defined IRQ-safe, this
means the values are subject to change from IRQs, and thus must be
reloaded.
Also, the generic form:
local_irq_save()
__this_cpu_read()
local_irq_restore()
would not allow the re-use of previous values; if by nothing else,
then the barrier()s implied by local_irq_*().
Which raises the point that percpu_from_op() and the others also need
that volatile.
OTOH __this_cpu_*() operations are not IRQ-safe and assume external
preempt/IRQ disabling and could thus be allowed more room for
optimization.
This makes the this_cpu_*() vs __this_cpu_*() behaviour more
consistent with other architectures.
$ ./compare.sh defconfig-build defconfig-build1 vmlinux.o
x86_pmu_cancel_txn 80 71 -9,+0
__text_poke 919 964 +45,+0
do_user_addr_fault 1082 1058 -24,+0
__do_page_fault 1194 1178 -16,+0
do_exit 2995 3027 -43,+75
process_one_work 1008 989 -67,+48
finish_task_switch 524 505 -19,+0
__schedule_bug 103 98 -59,+54
__schedule_bug 103 98 -59,+54
__sched_setscheduler 2015 2030 +15,+0
freeze_processes 203 230 +31,-4
rcu_gp_kthread_wake 106 99 -7,+0
rcu_core 1841 1834 -7,+0
call_timer_fn 298 286 -12,+0
can_stop_idle_tick 146 139 -31,+24
perf_pending_event 253 239 -14,+0
shmem_alloc_page 209 213 +4,+0
__alloc_pages_slowpath 3284 3269 -15,+0
umount_tree 671 694 +23,+0
advance_transaction 803 798 -5,+0
con_put_char 71 51 -20,+0
xhci_urb_enqueue 1302 1295 -7,+0
xhci_urb_enqueue 1302 1295 -7,+0
tcp_sacktag_write_queue 2130 2075 -55,+0
tcp_try_undo_loss 229 208 -21,+0
tcp_v4_inbound_md5_hash 438 411 -31,+4
tcp_v4_inbound_md5_hash 438 411 -31,+4
tcp_v6_inbound_md5_hash 469 411 -33,-25
tcp_v6_inbound_md5_hash 469 411 -33,-25
restricted_pointer 434 420 -14,+0
irq_exit 162 154 -8,+0
get_perf_callchain 638 624 -14,+0
rt_mutex_trylock 169 156 -13,+0
avc_has_extended_perms 1092 1089 -3,+0
avc_has_perm_noaudit 309 306 -3,+0
__perf_sw_event 138 122 -16,+0
perf_swevent_get_recursion_context 116 102 -14,+0
__local_bh_enable_ip 93 72 -21,+0
xfrm_input 4175 4161 -14,+0
avc_has_perm 446 443 -3,+0
vm_events_fold_cpu 57 56 -1,+0
vfree 68 61 -7,+0
freeze_processes 203 230 +31,-4
_local_bh_enable 44 30 -14,+0
ip_do_fragment 1982 1944 -38,+0
do_exit 2995 3027 -43,+75
__do_softirq 742 724 -18,+0
cpu_init 1510 1489 -21,+0
account_system_time 80 79 -1,+0
total 12985281 12984819 -742,+280
Reported-by: Nadav Amit <nadav.amit@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20181206112433.GB13675@hirez.programming.kicks-ass.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-12-06 11:24:33 +00:00
|
|
|
asm qual ("xaddb %0, "__percpu_arg(1) \
|
2010-12-17 14:47:04 +00:00
|
|
|
: "+q" (paro_ret__), "+m" (var) \
|
|
|
|
|
: : "memory"); \
|
|
|
|
|
break; \
|
|
|
|
|
case 2: \
|
x86/percpu: Differentiate this_cpu_{}() and __this_cpu_{}()
Nadav Amit reported that commit:
b59167ac7baf ("x86/percpu: Fix this_cpu_read()")
added a bunch of constraints to all sorts of code; and while some of
that was correct and desired, some of that seems superfluous.
The thing is, the this_cpu_*() operations are defined IRQ-safe, this
means the values are subject to change from IRQs, and thus must be
reloaded.
Also, the generic form:
local_irq_save()
__this_cpu_read()
local_irq_restore()
would not allow the re-use of previous values; if by nothing else,
then the barrier()s implied by local_irq_*().
Which raises the point that percpu_from_op() and the others also need
that volatile.
OTOH __this_cpu_*() operations are not IRQ-safe and assume external
preempt/IRQ disabling and could thus be allowed more room for
optimization.
This makes the this_cpu_*() vs __this_cpu_*() behaviour more
consistent with other architectures.
$ ./compare.sh defconfig-build defconfig-build1 vmlinux.o
x86_pmu_cancel_txn 80 71 -9,+0
__text_poke 919 964 +45,+0
do_user_addr_fault 1082 1058 -24,+0
__do_page_fault 1194 1178 -16,+0
do_exit 2995 3027 -43,+75
process_one_work 1008 989 -67,+48
finish_task_switch 524 505 -19,+0
__schedule_bug 103 98 -59,+54
__schedule_bug 103 98 -59,+54
__sched_setscheduler 2015 2030 +15,+0
freeze_processes 203 230 +31,-4
rcu_gp_kthread_wake 106 99 -7,+0
rcu_core 1841 1834 -7,+0
call_timer_fn 298 286 -12,+0
can_stop_idle_tick 146 139 -31,+24
perf_pending_event 253 239 -14,+0
shmem_alloc_page 209 213 +4,+0
__alloc_pages_slowpath 3284 3269 -15,+0
umount_tree 671 694 +23,+0
advance_transaction 803 798 -5,+0
con_put_char 71 51 -20,+0
xhci_urb_enqueue 1302 1295 -7,+0
xhci_urb_enqueue 1302 1295 -7,+0
tcp_sacktag_write_queue 2130 2075 -55,+0
tcp_try_undo_loss 229 208 -21,+0
tcp_v4_inbound_md5_hash 438 411 -31,+4
tcp_v4_inbound_md5_hash 438 411 -31,+4
tcp_v6_inbound_md5_hash 469 411 -33,-25
tcp_v6_inbound_md5_hash 469 411 -33,-25
restricted_pointer 434 420 -14,+0
irq_exit 162 154 -8,+0
get_perf_callchain 638 624 -14,+0
rt_mutex_trylock 169 156 -13,+0
avc_has_extended_perms 1092 1089 -3,+0
avc_has_perm_noaudit 309 306 -3,+0
__perf_sw_event 138 122 -16,+0
perf_swevent_get_recursion_context 116 102 -14,+0
__local_bh_enable_ip 93 72 -21,+0
xfrm_input 4175 4161 -14,+0
avc_has_perm 446 443 -3,+0
vm_events_fold_cpu 57 56 -1,+0
vfree 68 61 -7,+0
freeze_processes 203 230 +31,-4
_local_bh_enable 44 30 -14,+0
ip_do_fragment 1982 1944 -38,+0
do_exit 2995 3027 -43,+75
__do_softirq 742 724 -18,+0
cpu_init 1510 1489 -21,+0
account_system_time 80 79 -1,+0
total 12985281 12984819 -742,+280
Reported-by: Nadav Amit <nadav.amit@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20181206112433.GB13675@hirez.programming.kicks-ass.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-12-06 11:24:33 +00:00
|
|
|
asm qual ("xaddw %0, "__percpu_arg(1) \
|
2010-12-17 14:47:04 +00:00
|
|
|
: "+r" (paro_ret__), "+m" (var) \
|
|
|
|
|
: : "memory"); \
|
|
|
|
|
break; \
|
|
|
|
|
case 4: \
|
x86/percpu: Differentiate this_cpu_{}() and __this_cpu_{}()
Nadav Amit reported that commit:
b59167ac7baf ("x86/percpu: Fix this_cpu_read()")
added a bunch of constraints to all sorts of code; and while some of
that was correct and desired, some of that seems superfluous.
The thing is, the this_cpu_*() operations are defined IRQ-safe, this
means the values are subject to change from IRQs, and thus must be
reloaded.
Also, the generic form:
local_irq_save()
__this_cpu_read()
local_irq_restore()
would not allow the re-use of previous values; if by nothing else,
then the barrier()s implied by local_irq_*().
Which raises the point that percpu_from_op() and the others also need
that volatile.
OTOH __this_cpu_*() operations are not IRQ-safe and assume external
preempt/IRQ disabling and could thus be allowed more room for
optimization.
This makes the this_cpu_*() vs __this_cpu_*() behaviour more
consistent with other architectures.
$ ./compare.sh defconfig-build defconfig-build1 vmlinux.o
x86_pmu_cancel_txn 80 71 -9,+0
__text_poke 919 964 +45,+0
do_user_addr_fault 1082 1058 -24,+0
__do_page_fault 1194 1178 -16,+0
do_exit 2995 3027 -43,+75
process_one_work 1008 989 -67,+48
finish_task_switch 524 505 -19,+0
__schedule_bug 103 98 -59,+54
__schedule_bug 103 98 -59,+54
__sched_setscheduler 2015 2030 +15,+0
freeze_processes 203 230 +31,-4
rcu_gp_kthread_wake 106 99 -7,+0
rcu_core 1841 1834 -7,+0
call_timer_fn 298 286 -12,+0
can_stop_idle_tick 146 139 -31,+24
perf_pending_event 253 239 -14,+0
shmem_alloc_page 209 213 +4,+0
__alloc_pages_slowpath 3284 3269 -15,+0
umount_tree 671 694 +23,+0
advance_transaction 803 798 -5,+0
con_put_char 71 51 -20,+0
xhci_urb_enqueue 1302 1295 -7,+0
xhci_urb_enqueue 1302 1295 -7,+0
tcp_sacktag_write_queue 2130 2075 -55,+0
tcp_try_undo_loss 229 208 -21,+0
tcp_v4_inbound_md5_hash 438 411 -31,+4
tcp_v4_inbound_md5_hash 438 411 -31,+4
tcp_v6_inbound_md5_hash 469 411 -33,-25
tcp_v6_inbound_md5_hash 469 411 -33,-25
restricted_pointer 434 420 -14,+0
irq_exit 162 154 -8,+0
get_perf_callchain 638 624 -14,+0
rt_mutex_trylock 169 156 -13,+0
avc_has_extended_perms 1092 1089 -3,+0
avc_has_perm_noaudit 309 306 -3,+0
__perf_sw_event 138 122 -16,+0
perf_swevent_get_recursion_context 116 102 -14,+0
__local_bh_enable_ip 93 72 -21,+0
xfrm_input 4175 4161 -14,+0
avc_has_perm 446 443 -3,+0
vm_events_fold_cpu 57 56 -1,+0
vfree 68 61 -7,+0
freeze_processes 203 230 +31,-4
_local_bh_enable 44 30 -14,+0
ip_do_fragment 1982 1944 -38,+0
do_exit 2995 3027 -43,+75
__do_softirq 742 724 -18,+0
cpu_init 1510 1489 -21,+0
account_system_time 80 79 -1,+0
total 12985281 12984819 -742,+280
Reported-by: Nadav Amit <nadav.amit@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20181206112433.GB13675@hirez.programming.kicks-ass.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-12-06 11:24:33 +00:00
|
|
|
asm qual ("xaddl %0, "__percpu_arg(1) \
|
2010-12-17 14:47:04 +00:00
|
|
|
: "+r" (paro_ret__), "+m" (var) \
|
|
|
|
|
: : "memory"); \
|
|
|
|
|
break; \
|
|
|
|
|
case 8: \
|
x86/percpu: Differentiate this_cpu_{}() and __this_cpu_{}()
Nadav Amit reported that commit:
b59167ac7baf ("x86/percpu: Fix this_cpu_read()")
added a bunch of constraints to all sorts of code; and while some of
that was correct and desired, some of that seems superfluous.
The thing is, the this_cpu_*() operations are defined IRQ-safe, this
means the values are subject to change from IRQs, and thus must be
reloaded.
Also, the generic form:
local_irq_save()
__this_cpu_read()
local_irq_restore()
would not allow the re-use of previous values; if by nothing else,
then the barrier()s implied by local_irq_*().
Which raises the point that percpu_from_op() and the others also need
that volatile.
OTOH __this_cpu_*() operations are not IRQ-safe and assume external
preempt/IRQ disabling and could thus be allowed more room for
optimization.
This makes the this_cpu_*() vs __this_cpu_*() behaviour more
consistent with other architectures.
$ ./compare.sh defconfig-build defconfig-build1 vmlinux.o
x86_pmu_cancel_txn 80 71 -9,+0
__text_poke 919 964 +45,+0
do_user_addr_fault 1082 1058 -24,+0
__do_page_fault 1194 1178 -16,+0
do_exit 2995 3027 -43,+75
process_one_work 1008 989 -67,+48
finish_task_switch 524 505 -19,+0
__schedule_bug 103 98 -59,+54
__schedule_bug 103 98 -59,+54
__sched_setscheduler 2015 2030 +15,+0
freeze_processes 203 230 +31,-4
rcu_gp_kthread_wake 106 99 -7,+0
rcu_core 1841 1834 -7,+0
call_timer_fn 298 286 -12,+0
can_stop_idle_tick 146 139 -31,+24
perf_pending_event 253 239 -14,+0
shmem_alloc_page 209 213 +4,+0
__alloc_pages_slowpath 3284 3269 -15,+0
umount_tree 671 694 +23,+0
advance_transaction 803 798 -5,+0
con_put_char 71 51 -20,+0
xhci_urb_enqueue 1302 1295 -7,+0
xhci_urb_enqueue 1302 1295 -7,+0
tcp_sacktag_write_queue 2130 2075 -55,+0
tcp_try_undo_loss 229 208 -21,+0
tcp_v4_inbound_md5_hash 438 411 -31,+4
tcp_v4_inbound_md5_hash 438 411 -31,+4
tcp_v6_inbound_md5_hash 469 411 -33,-25
tcp_v6_inbound_md5_hash 469 411 -33,-25
restricted_pointer 434 420 -14,+0
irq_exit 162 154 -8,+0
get_perf_callchain 638 624 -14,+0
rt_mutex_trylock 169 156 -13,+0
avc_has_extended_perms 1092 1089 -3,+0
avc_has_perm_noaudit 309 306 -3,+0
__perf_sw_event 138 122 -16,+0
perf_swevent_get_recursion_context 116 102 -14,+0
__local_bh_enable_ip 93 72 -21,+0
xfrm_input 4175 4161 -14,+0
avc_has_perm 446 443 -3,+0
vm_events_fold_cpu 57 56 -1,+0
vfree 68 61 -7,+0
freeze_processes 203 230 +31,-4
_local_bh_enable 44 30 -14,+0
ip_do_fragment 1982 1944 -38,+0
do_exit 2995 3027 -43,+75
__do_softirq 742 724 -18,+0
cpu_init 1510 1489 -21,+0
account_system_time 80 79 -1,+0
total 12985281 12984819 -742,+280
Reported-by: Nadav Amit <nadav.amit@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20181206112433.GB13675@hirez.programming.kicks-ass.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-12-06 11:24:33 +00:00
|
|
|
asm qual ("xaddq %0, "__percpu_arg(1) \
|
2010-12-17 14:47:04 +00:00
|
|
|
: "+re" (paro_ret__), "+m" (var) \
|
|
|
|
|
: : "memory"); \
|
|
|
|
|
break; \
|
|
|
|
|
default: __bad_percpu_size(); \
|
|
|
|
|
} \
|
|
|
|
|
paro_ret__ += val; \
|
|
|
|
|
paro_ret__; \
|
|
|
|
|
})
|
|
|
|
|
|
2010-12-14 16:28:44 +00:00
|
|
|
/*
|
2010-12-14 16:28:47 +00:00
|
|
|
* xchg is implemented using cmpxchg without a lock prefix. xchg is
|
|
|
|
|
* expensive due to the implied lock prefix. The processor cannot prefetch
|
|
|
|
|
* cachelines if xchg is used.
|
2010-12-14 16:28:44 +00:00
|
|
|
*/
|
x86/percpu: Differentiate this_cpu_{}() and __this_cpu_{}()
Nadav Amit reported that commit:
b59167ac7baf ("x86/percpu: Fix this_cpu_read()")
added a bunch of constraints to all sorts of code; and while some of
that was correct and desired, some of that seems superfluous.
The thing is, the this_cpu_*() operations are defined IRQ-safe, this
means the values are subject to change from IRQs, and thus must be
reloaded.
Also, the generic form:
local_irq_save()
__this_cpu_read()
local_irq_restore()
would not allow the re-use of previous values; if by nothing else,
then the barrier()s implied by local_irq_*().
Which raises the point that percpu_from_op() and the others also need
that volatile.
OTOH __this_cpu_*() operations are not IRQ-safe and assume external
preempt/IRQ disabling and could thus be allowed more room for
optimization.
This makes the this_cpu_*() vs __this_cpu_*() behaviour more
consistent with other architectures.
$ ./compare.sh defconfig-build defconfig-build1 vmlinux.o
x86_pmu_cancel_txn 80 71 -9,+0
__text_poke 919 964 +45,+0
do_user_addr_fault 1082 1058 -24,+0
__do_page_fault 1194 1178 -16,+0
do_exit 2995 3027 -43,+75
process_one_work 1008 989 -67,+48
finish_task_switch 524 505 -19,+0
__schedule_bug 103 98 -59,+54
__schedule_bug 103 98 -59,+54
__sched_setscheduler 2015 2030 +15,+0
freeze_processes 203 230 +31,-4
rcu_gp_kthread_wake 106 99 -7,+0
rcu_core 1841 1834 -7,+0
call_timer_fn 298 286 -12,+0
can_stop_idle_tick 146 139 -31,+24
perf_pending_event 253 239 -14,+0
shmem_alloc_page 209 213 +4,+0
__alloc_pages_slowpath 3284 3269 -15,+0
umount_tree 671 694 +23,+0
advance_transaction 803 798 -5,+0
con_put_char 71 51 -20,+0
xhci_urb_enqueue 1302 1295 -7,+0
xhci_urb_enqueue 1302 1295 -7,+0
tcp_sacktag_write_queue 2130 2075 -55,+0
tcp_try_undo_loss 229 208 -21,+0
tcp_v4_inbound_md5_hash 438 411 -31,+4
tcp_v4_inbound_md5_hash 438 411 -31,+4
tcp_v6_inbound_md5_hash 469 411 -33,-25
tcp_v6_inbound_md5_hash 469 411 -33,-25
restricted_pointer 434 420 -14,+0
irq_exit 162 154 -8,+0
get_perf_callchain 638 624 -14,+0
rt_mutex_trylock 169 156 -13,+0
avc_has_extended_perms 1092 1089 -3,+0
avc_has_perm_noaudit 309 306 -3,+0
__perf_sw_event 138 122 -16,+0
perf_swevent_get_recursion_context 116 102 -14,+0
__local_bh_enable_ip 93 72 -21,+0
xfrm_input 4175 4161 -14,+0
avc_has_perm 446 443 -3,+0
vm_events_fold_cpu 57 56 -1,+0
vfree 68 61 -7,+0
freeze_processes 203 230 +31,-4
_local_bh_enable 44 30 -14,+0
ip_do_fragment 1982 1944 -38,+0
do_exit 2995 3027 -43,+75
__do_softirq 742 724 -18,+0
cpu_init 1510 1489 -21,+0
account_system_time 80 79 -1,+0
total 12985281 12984819 -742,+280
Reported-by: Nadav Amit <nadav.amit@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20181206112433.GB13675@hirez.programming.kicks-ass.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-12-06 11:24:33 +00:00
|
|
|
#define percpu_xchg_op(qual, var, nval) \
|
2010-12-14 16:28:44 +00:00
|
|
|
({ \
|
|
|
|
|
typeof(var) pxo_ret__; \
|
|
|
|
|
typeof(var) pxo_new__ = (nval); \
|
|
|
|
|
switch (sizeof(var)) { \
|
|
|
|
|
case 1: \
|
x86/percpu: Differentiate this_cpu_{}() and __this_cpu_{}()
Nadav Amit reported that commit:
b59167ac7baf ("x86/percpu: Fix this_cpu_read()")
added a bunch of constraints to all sorts of code; and while some of
that was correct and desired, some of that seems superfluous.
The thing is, the this_cpu_*() operations are defined IRQ-safe, this
means the values are subject to change from IRQs, and thus must be
reloaded.
Also, the generic form:
local_irq_save()
__this_cpu_read()
local_irq_restore()
would not allow the re-use of previous values; if by nothing else,
then the barrier()s implied by local_irq_*().
Which raises the point that percpu_from_op() and the others also need
that volatile.
OTOH __this_cpu_*() operations are not IRQ-safe and assume external
preempt/IRQ disabling and could thus be allowed more room for
optimization.
This makes the this_cpu_*() vs __this_cpu_*() behaviour more
consistent with other architectures.
$ ./compare.sh defconfig-build defconfig-build1 vmlinux.o
x86_pmu_cancel_txn 80 71 -9,+0
__text_poke 919 964 +45,+0
do_user_addr_fault 1082 1058 -24,+0
__do_page_fault 1194 1178 -16,+0
do_exit 2995 3027 -43,+75
process_one_work 1008 989 -67,+48
finish_task_switch 524 505 -19,+0
__schedule_bug 103 98 -59,+54
__schedule_bug 103 98 -59,+54
__sched_setscheduler 2015 2030 +15,+0
freeze_processes 203 230 +31,-4
rcu_gp_kthread_wake 106 99 -7,+0
rcu_core 1841 1834 -7,+0
call_timer_fn 298 286 -12,+0
can_stop_idle_tick 146 139 -31,+24
perf_pending_event 253 239 -14,+0
shmem_alloc_page 209 213 +4,+0
__alloc_pages_slowpath 3284 3269 -15,+0
umount_tree 671 694 +23,+0
advance_transaction 803 798 -5,+0
con_put_char 71 51 -20,+0
xhci_urb_enqueue 1302 1295 -7,+0
xhci_urb_enqueue 1302 1295 -7,+0
tcp_sacktag_write_queue 2130 2075 -55,+0
tcp_try_undo_loss 229 208 -21,+0
tcp_v4_inbound_md5_hash 438 411 -31,+4
tcp_v4_inbound_md5_hash 438 411 -31,+4
tcp_v6_inbound_md5_hash 469 411 -33,-25
tcp_v6_inbound_md5_hash 469 411 -33,-25
restricted_pointer 434 420 -14,+0
irq_exit 162 154 -8,+0
get_perf_callchain 638 624 -14,+0
rt_mutex_trylock 169 156 -13,+0
avc_has_extended_perms 1092 1089 -3,+0
avc_has_perm_noaudit 309 306 -3,+0
__perf_sw_event 138 122 -16,+0
perf_swevent_get_recursion_context 116 102 -14,+0
__local_bh_enable_ip 93 72 -21,+0
xfrm_input 4175 4161 -14,+0
avc_has_perm 446 443 -3,+0
vm_events_fold_cpu 57 56 -1,+0
vfree 68 61 -7,+0
freeze_processes 203 230 +31,-4
_local_bh_enable 44 30 -14,+0
ip_do_fragment 1982 1944 -38,+0
do_exit 2995 3027 -43,+75
__do_softirq 742 724 -18,+0
cpu_init 1510 1489 -21,+0
account_system_time 80 79 -1,+0
total 12985281 12984819 -742,+280
Reported-by: Nadav Amit <nadav.amit@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20181206112433.GB13675@hirez.programming.kicks-ass.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-12-06 11:24:33 +00:00
|
|
|
asm qual ("\n\tmov "__percpu_arg(1)",%%al" \
|
percpu, x86: Fix percpu_xchg_op()
These recent percpu commits:
2485b6464cf8: x86,percpu: Move out of place 64 bit ops into X86_64 section
8270137a0d50: cpuops: Use cmpxchg for xchg to avoid lock semantics
Caused this 'perf top' crash:
Kernel panic - not syncing: Fatal exception in interrupt
Pid: 0, comm: swapper Tainted: G D
2.6.38-rc2-00181-gef71723 #413 Call Trace: <IRQ> [<ffffffff810465b5>]
? panic
? kmsg_dump
? kmsg_dump
? oops_end
? no_context
? __bad_area_nosemaphore
? perf_output_begin
? bad_area_nosemaphore
? do_page_fault
? __task_pid_nr_ns
? perf_event_tid
? __perf_event_header__init_id
? validate_chain
? perf_output_sample
? trace_hardirqs_off
? page_fault
? irq_work_run
? update_process_times
? tick_sched_timer
? tick_sched_timer
? __run_hrtimer
? hrtimer_interrupt
? account_system_vtime
? smp_apic_timer_interrupt
? apic_timer_interrupt
...
Looking at assembly code, I found:
list = this_cpu_xchg(irq_work_list, NULL);
gives this wrong code : (gcc-4.1.2 cross compiler)
ffffffff810bc45e:
mov %gs:0xead0,%rax
cmpxchg %rax,%gs:0xead0
jne ffffffff810bc45e <irq_work_run+0x3e>
test %rax,%rax
je ffffffff810bc4aa <irq_work_run+0x8a>
Tell gcc we dirty eax/rax register in percpu_xchg_op()
Compiler must use another register to store pxo_new__
We also dont need to reload percpu value after a jump,
since a 'failed' cmpxchg already updated eax/rax
Wrong generated code was :
xor %rax,%rax /* load 0 into %rax */
1: mov %gs:0xead0,%rax
cmpxchg %rax,%gs:0xead0
jne 1b
test %rax,%rax
After patch :
xor %rdx,%rdx /* load 0 into %rdx */
mov %gs:0xead0,%rax
1: cmpxchg %rdx,%gs:0xead0
jne 1b:
test %rax,%rax
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Christoph Lameter <cl@linux-foundation.org>
Cc: Tejun Heo <tj@kernel.org>
LKML-Reference: <1295973114.3588.312.camel@edumazet-laptop>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-01-25 16:31:54 +00:00
|
|
|
"\n1:\tcmpxchgb %2, "__percpu_arg(1) \
|
2010-12-14 16:28:47 +00:00
|
|
|
"\n\tjnz 1b" \
|
percpu, x86: Fix percpu_xchg_op()
These recent percpu commits:
2485b6464cf8: x86,percpu: Move out of place 64 bit ops into X86_64 section
8270137a0d50: cpuops: Use cmpxchg for xchg to avoid lock semantics
Caused this 'perf top' crash:
Kernel panic - not syncing: Fatal exception in interrupt
Pid: 0, comm: swapper Tainted: G D
2.6.38-rc2-00181-gef71723 #413 Call Trace: <IRQ> [<ffffffff810465b5>]
? panic
? kmsg_dump
? kmsg_dump
? oops_end
? no_context
? __bad_area_nosemaphore
? perf_output_begin
? bad_area_nosemaphore
? do_page_fault
? __task_pid_nr_ns
? perf_event_tid
? __perf_event_header__init_id
? validate_chain
? perf_output_sample
? trace_hardirqs_off
? page_fault
? irq_work_run
? update_process_times
? tick_sched_timer
? tick_sched_timer
? __run_hrtimer
? hrtimer_interrupt
? account_system_vtime
? smp_apic_timer_interrupt
? apic_timer_interrupt
...
Looking at assembly code, I found:
list = this_cpu_xchg(irq_work_list, NULL);
gives this wrong code : (gcc-4.1.2 cross compiler)
ffffffff810bc45e:
mov %gs:0xead0,%rax
cmpxchg %rax,%gs:0xead0
jne ffffffff810bc45e <irq_work_run+0x3e>
test %rax,%rax
je ffffffff810bc4aa <irq_work_run+0x8a>
Tell gcc we dirty eax/rax register in percpu_xchg_op()
Compiler must use another register to store pxo_new__
We also dont need to reload percpu value after a jump,
since a 'failed' cmpxchg already updated eax/rax
Wrong generated code was :
xor %rax,%rax /* load 0 into %rax */
1: mov %gs:0xead0,%rax
cmpxchg %rax,%gs:0xead0
jne 1b
test %rax,%rax
After patch :
xor %rdx,%rdx /* load 0 into %rdx */
mov %gs:0xead0,%rax
1: cmpxchg %rdx,%gs:0xead0
jne 1b:
test %rax,%rax
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Christoph Lameter <cl@linux-foundation.org>
Cc: Tejun Heo <tj@kernel.org>
LKML-Reference: <1295973114.3588.312.camel@edumazet-laptop>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-01-25 16:31:54 +00:00
|
|
|
: "=&a" (pxo_ret__), "+m" (var) \
|
2010-12-14 16:28:44 +00:00
|
|
|
: "q" (pxo_new__) \
|
|
|
|
|
: "memory"); \
|
|
|
|
|
break; \
|
|
|
|
|
case 2: \
|
x86/percpu: Differentiate this_cpu_{}() and __this_cpu_{}()
Nadav Amit reported that commit:
b59167ac7baf ("x86/percpu: Fix this_cpu_read()")
added a bunch of constraints to all sorts of code; and while some of
that was correct and desired, some of that seems superfluous.
The thing is, the this_cpu_*() operations are defined IRQ-safe, this
means the values are subject to change from IRQs, and thus must be
reloaded.
Also, the generic form:
local_irq_save()
__this_cpu_read()
local_irq_restore()
would not allow the re-use of previous values; if by nothing else,
then the barrier()s implied by local_irq_*().
Which raises the point that percpu_from_op() and the others also need
that volatile.
OTOH __this_cpu_*() operations are not IRQ-safe and assume external
preempt/IRQ disabling and could thus be allowed more room for
optimization.
This makes the this_cpu_*() vs __this_cpu_*() behaviour more
consistent with other architectures.
$ ./compare.sh defconfig-build defconfig-build1 vmlinux.o
x86_pmu_cancel_txn 80 71 -9,+0
__text_poke 919 964 +45,+0
do_user_addr_fault 1082 1058 -24,+0
__do_page_fault 1194 1178 -16,+0
do_exit 2995 3027 -43,+75
process_one_work 1008 989 -67,+48
finish_task_switch 524 505 -19,+0
__schedule_bug 103 98 -59,+54
__schedule_bug 103 98 -59,+54
__sched_setscheduler 2015 2030 +15,+0
freeze_processes 203 230 +31,-4
rcu_gp_kthread_wake 106 99 -7,+0
rcu_core 1841 1834 -7,+0
call_timer_fn 298 286 -12,+0
can_stop_idle_tick 146 139 -31,+24
perf_pending_event 253 239 -14,+0
shmem_alloc_page 209 213 +4,+0
__alloc_pages_slowpath 3284 3269 -15,+0
umount_tree 671 694 +23,+0
advance_transaction 803 798 -5,+0
con_put_char 71 51 -20,+0
xhci_urb_enqueue 1302 1295 -7,+0
xhci_urb_enqueue 1302 1295 -7,+0
tcp_sacktag_write_queue 2130 2075 -55,+0
tcp_try_undo_loss 229 208 -21,+0
tcp_v4_inbound_md5_hash 438 411 -31,+4
tcp_v4_inbound_md5_hash 438 411 -31,+4
tcp_v6_inbound_md5_hash 469 411 -33,-25
tcp_v6_inbound_md5_hash 469 411 -33,-25
restricted_pointer 434 420 -14,+0
irq_exit 162 154 -8,+0
get_perf_callchain 638 624 -14,+0
rt_mutex_trylock 169 156 -13,+0
avc_has_extended_perms 1092 1089 -3,+0
avc_has_perm_noaudit 309 306 -3,+0
__perf_sw_event 138 122 -16,+0
perf_swevent_get_recursion_context 116 102 -14,+0
__local_bh_enable_ip 93 72 -21,+0
xfrm_input 4175 4161 -14,+0
avc_has_perm 446 443 -3,+0
vm_events_fold_cpu 57 56 -1,+0
vfree 68 61 -7,+0
freeze_processes 203 230 +31,-4
_local_bh_enable 44 30 -14,+0
ip_do_fragment 1982 1944 -38,+0
do_exit 2995 3027 -43,+75
__do_softirq 742 724 -18,+0
cpu_init 1510 1489 -21,+0
account_system_time 80 79 -1,+0
total 12985281 12984819 -742,+280
Reported-by: Nadav Amit <nadav.amit@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20181206112433.GB13675@hirez.programming.kicks-ass.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-12-06 11:24:33 +00:00
|
|
|
asm qual ("\n\tmov "__percpu_arg(1)",%%ax" \
|
percpu, x86: Fix percpu_xchg_op()
These recent percpu commits:
2485b6464cf8: x86,percpu: Move out of place 64 bit ops into X86_64 section
8270137a0d50: cpuops: Use cmpxchg for xchg to avoid lock semantics
Caused this 'perf top' crash:
Kernel panic - not syncing: Fatal exception in interrupt
Pid: 0, comm: swapper Tainted: G D
2.6.38-rc2-00181-gef71723 #413 Call Trace: <IRQ> [<ffffffff810465b5>]
? panic
? kmsg_dump
? kmsg_dump
? oops_end
? no_context
? __bad_area_nosemaphore
? perf_output_begin
? bad_area_nosemaphore
? do_page_fault
? __task_pid_nr_ns
? perf_event_tid
? __perf_event_header__init_id
? validate_chain
? perf_output_sample
? trace_hardirqs_off
? page_fault
? irq_work_run
? update_process_times
? tick_sched_timer
? tick_sched_timer
? __run_hrtimer
? hrtimer_interrupt
? account_system_vtime
? smp_apic_timer_interrupt
? apic_timer_interrupt
...
Looking at assembly code, I found:
list = this_cpu_xchg(irq_work_list, NULL);
gives this wrong code : (gcc-4.1.2 cross compiler)
ffffffff810bc45e:
mov %gs:0xead0,%rax
cmpxchg %rax,%gs:0xead0
jne ffffffff810bc45e <irq_work_run+0x3e>
test %rax,%rax
je ffffffff810bc4aa <irq_work_run+0x8a>
Tell gcc we dirty eax/rax register in percpu_xchg_op()
Compiler must use another register to store pxo_new__
We also dont need to reload percpu value after a jump,
since a 'failed' cmpxchg already updated eax/rax
Wrong generated code was :
xor %rax,%rax /* load 0 into %rax */
1: mov %gs:0xead0,%rax
cmpxchg %rax,%gs:0xead0
jne 1b
test %rax,%rax
After patch :
xor %rdx,%rdx /* load 0 into %rdx */
mov %gs:0xead0,%rax
1: cmpxchg %rdx,%gs:0xead0
jne 1b:
test %rax,%rax
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Christoph Lameter <cl@linux-foundation.org>
Cc: Tejun Heo <tj@kernel.org>
LKML-Reference: <1295973114.3588.312.camel@edumazet-laptop>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-01-25 16:31:54 +00:00
|
|
|
"\n1:\tcmpxchgw %2, "__percpu_arg(1) \
|
2010-12-14 16:28:47 +00:00
|
|
|
"\n\tjnz 1b" \
|
percpu, x86: Fix percpu_xchg_op()
These recent percpu commits:
2485b6464cf8: x86,percpu: Move out of place 64 bit ops into X86_64 section
8270137a0d50: cpuops: Use cmpxchg for xchg to avoid lock semantics
Caused this 'perf top' crash:
Kernel panic - not syncing: Fatal exception in interrupt
Pid: 0, comm: swapper Tainted: G D
2.6.38-rc2-00181-gef71723 #413 Call Trace: <IRQ> [<ffffffff810465b5>]
? panic
? kmsg_dump
? kmsg_dump
? oops_end
? no_context
? __bad_area_nosemaphore
? perf_output_begin
? bad_area_nosemaphore
? do_page_fault
? __task_pid_nr_ns
? perf_event_tid
? __perf_event_header__init_id
? validate_chain
? perf_output_sample
? trace_hardirqs_off
? page_fault
? irq_work_run
? update_process_times
? tick_sched_timer
? tick_sched_timer
? __run_hrtimer
? hrtimer_interrupt
? account_system_vtime
? smp_apic_timer_interrupt
? apic_timer_interrupt
...
Looking at assembly code, I found:
list = this_cpu_xchg(irq_work_list, NULL);
gives this wrong code : (gcc-4.1.2 cross compiler)
ffffffff810bc45e:
mov %gs:0xead0,%rax
cmpxchg %rax,%gs:0xead0
jne ffffffff810bc45e <irq_work_run+0x3e>
test %rax,%rax
je ffffffff810bc4aa <irq_work_run+0x8a>
Tell gcc we dirty eax/rax register in percpu_xchg_op()
Compiler must use another register to store pxo_new__
We also dont need to reload percpu value after a jump,
since a 'failed' cmpxchg already updated eax/rax
Wrong generated code was :
xor %rax,%rax /* load 0 into %rax */
1: mov %gs:0xead0,%rax
cmpxchg %rax,%gs:0xead0
jne 1b
test %rax,%rax
After patch :
xor %rdx,%rdx /* load 0 into %rdx */
mov %gs:0xead0,%rax
1: cmpxchg %rdx,%gs:0xead0
jne 1b:
test %rax,%rax
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Christoph Lameter <cl@linux-foundation.org>
Cc: Tejun Heo <tj@kernel.org>
LKML-Reference: <1295973114.3588.312.camel@edumazet-laptop>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-01-25 16:31:54 +00:00
|
|
|
: "=&a" (pxo_ret__), "+m" (var) \
|
2010-12-14 16:28:44 +00:00
|
|
|
: "r" (pxo_new__) \
|
|
|
|
|
: "memory"); \
|
|
|
|
|
break; \
|
|
|
|
|
case 4: \
|
x86/percpu: Differentiate this_cpu_{}() and __this_cpu_{}()
Nadav Amit reported that commit:
b59167ac7baf ("x86/percpu: Fix this_cpu_read()")
added a bunch of constraints to all sorts of code; and while some of
that was correct and desired, some of that seems superfluous.
The thing is, the this_cpu_*() operations are defined IRQ-safe, this
means the values are subject to change from IRQs, and thus must be
reloaded.
Also, the generic form:
local_irq_save()
__this_cpu_read()
local_irq_restore()
would not allow the re-use of previous values; if by nothing else,
then the barrier()s implied by local_irq_*().
Which raises the point that percpu_from_op() and the others also need
that volatile.
OTOH __this_cpu_*() operations are not IRQ-safe and assume external
preempt/IRQ disabling and could thus be allowed more room for
optimization.
This makes the this_cpu_*() vs __this_cpu_*() behaviour more
consistent with other architectures.
$ ./compare.sh defconfig-build defconfig-build1 vmlinux.o
x86_pmu_cancel_txn 80 71 -9,+0
__text_poke 919 964 +45,+0
do_user_addr_fault 1082 1058 -24,+0
__do_page_fault 1194 1178 -16,+0
do_exit 2995 3027 -43,+75
process_one_work 1008 989 -67,+48
finish_task_switch 524 505 -19,+0
__schedule_bug 103 98 -59,+54
__schedule_bug 103 98 -59,+54
__sched_setscheduler 2015 2030 +15,+0
freeze_processes 203 230 +31,-4
rcu_gp_kthread_wake 106 99 -7,+0
rcu_core 1841 1834 -7,+0
call_timer_fn 298 286 -12,+0
can_stop_idle_tick 146 139 -31,+24
perf_pending_event 253 239 -14,+0
shmem_alloc_page 209 213 +4,+0
__alloc_pages_slowpath 3284 3269 -15,+0
umount_tree 671 694 +23,+0
advance_transaction 803 798 -5,+0
con_put_char 71 51 -20,+0
xhci_urb_enqueue 1302 1295 -7,+0
xhci_urb_enqueue 1302 1295 -7,+0
tcp_sacktag_write_queue 2130 2075 -55,+0
tcp_try_undo_loss 229 208 -21,+0
tcp_v4_inbound_md5_hash 438 411 -31,+4
tcp_v4_inbound_md5_hash 438 411 -31,+4
tcp_v6_inbound_md5_hash 469 411 -33,-25
tcp_v6_inbound_md5_hash 469 411 -33,-25
restricted_pointer 434 420 -14,+0
irq_exit 162 154 -8,+0
get_perf_callchain 638 624 -14,+0
rt_mutex_trylock 169 156 -13,+0
avc_has_extended_perms 1092 1089 -3,+0
avc_has_perm_noaudit 309 306 -3,+0
__perf_sw_event 138 122 -16,+0
perf_swevent_get_recursion_context 116 102 -14,+0
__local_bh_enable_ip 93 72 -21,+0
xfrm_input 4175 4161 -14,+0
avc_has_perm 446 443 -3,+0
vm_events_fold_cpu 57 56 -1,+0
vfree 68 61 -7,+0
freeze_processes 203 230 +31,-4
_local_bh_enable 44 30 -14,+0
ip_do_fragment 1982 1944 -38,+0
do_exit 2995 3027 -43,+75
__do_softirq 742 724 -18,+0
cpu_init 1510 1489 -21,+0
account_system_time 80 79 -1,+0
total 12985281 12984819 -742,+280
Reported-by: Nadav Amit <nadav.amit@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20181206112433.GB13675@hirez.programming.kicks-ass.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-12-06 11:24:33 +00:00
|
|
|
asm qual ("\n\tmov "__percpu_arg(1)",%%eax" \
|
percpu, x86: Fix percpu_xchg_op()
These recent percpu commits:
2485b6464cf8: x86,percpu: Move out of place 64 bit ops into X86_64 section
8270137a0d50: cpuops: Use cmpxchg for xchg to avoid lock semantics
Caused this 'perf top' crash:
Kernel panic - not syncing: Fatal exception in interrupt
Pid: 0, comm: swapper Tainted: G D
2.6.38-rc2-00181-gef71723 #413 Call Trace: <IRQ> [<ffffffff810465b5>]
? panic
? kmsg_dump
? kmsg_dump
? oops_end
? no_context
? __bad_area_nosemaphore
? perf_output_begin
? bad_area_nosemaphore
? do_page_fault
? __task_pid_nr_ns
? perf_event_tid
? __perf_event_header__init_id
? validate_chain
? perf_output_sample
? trace_hardirqs_off
? page_fault
? irq_work_run
? update_process_times
? tick_sched_timer
? tick_sched_timer
? __run_hrtimer
? hrtimer_interrupt
? account_system_vtime
? smp_apic_timer_interrupt
? apic_timer_interrupt
...
Looking at assembly code, I found:
list = this_cpu_xchg(irq_work_list, NULL);
gives this wrong code : (gcc-4.1.2 cross compiler)
ffffffff810bc45e:
mov %gs:0xead0,%rax
cmpxchg %rax,%gs:0xead0
jne ffffffff810bc45e <irq_work_run+0x3e>
test %rax,%rax
je ffffffff810bc4aa <irq_work_run+0x8a>
Tell gcc we dirty eax/rax register in percpu_xchg_op()
Compiler must use another register to store pxo_new__
We also dont need to reload percpu value after a jump,
since a 'failed' cmpxchg already updated eax/rax
Wrong generated code was :
xor %rax,%rax /* load 0 into %rax */
1: mov %gs:0xead0,%rax
cmpxchg %rax,%gs:0xead0
jne 1b
test %rax,%rax
After patch :
xor %rdx,%rdx /* load 0 into %rdx */
mov %gs:0xead0,%rax
1: cmpxchg %rdx,%gs:0xead0
jne 1b:
test %rax,%rax
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Christoph Lameter <cl@linux-foundation.org>
Cc: Tejun Heo <tj@kernel.org>
LKML-Reference: <1295973114.3588.312.camel@edumazet-laptop>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-01-25 16:31:54 +00:00
|
|
|
"\n1:\tcmpxchgl %2, "__percpu_arg(1) \
|
2010-12-14 16:28:47 +00:00
|
|
|
"\n\tjnz 1b" \
|
percpu, x86: Fix percpu_xchg_op()
These recent percpu commits:
2485b6464cf8: x86,percpu: Move out of place 64 bit ops into X86_64 section
8270137a0d50: cpuops: Use cmpxchg for xchg to avoid lock semantics
Caused this 'perf top' crash:
Kernel panic - not syncing: Fatal exception in interrupt
Pid: 0, comm: swapper Tainted: G D
2.6.38-rc2-00181-gef71723 #413 Call Trace: <IRQ> [<ffffffff810465b5>]
? panic
? kmsg_dump
? kmsg_dump
? oops_end
? no_context
? __bad_area_nosemaphore
? perf_output_begin
? bad_area_nosemaphore
? do_page_fault
? __task_pid_nr_ns
? perf_event_tid
? __perf_event_header__init_id
? validate_chain
? perf_output_sample
? trace_hardirqs_off
? page_fault
? irq_work_run
? update_process_times
? tick_sched_timer
? tick_sched_timer
? __run_hrtimer
? hrtimer_interrupt
? account_system_vtime
? smp_apic_timer_interrupt
? apic_timer_interrupt
...
Looking at assembly code, I found:
list = this_cpu_xchg(irq_work_list, NULL);
gives this wrong code : (gcc-4.1.2 cross compiler)
ffffffff810bc45e:
mov %gs:0xead0,%rax
cmpxchg %rax,%gs:0xead0
jne ffffffff810bc45e <irq_work_run+0x3e>
test %rax,%rax
je ffffffff810bc4aa <irq_work_run+0x8a>
Tell gcc we dirty eax/rax register in percpu_xchg_op()
Compiler must use another register to store pxo_new__
We also dont need to reload percpu value after a jump,
since a 'failed' cmpxchg already updated eax/rax
Wrong generated code was :
xor %rax,%rax /* load 0 into %rax */
1: mov %gs:0xead0,%rax
cmpxchg %rax,%gs:0xead0
jne 1b
test %rax,%rax
After patch :
xor %rdx,%rdx /* load 0 into %rdx */
mov %gs:0xead0,%rax
1: cmpxchg %rdx,%gs:0xead0
jne 1b:
test %rax,%rax
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Christoph Lameter <cl@linux-foundation.org>
Cc: Tejun Heo <tj@kernel.org>
LKML-Reference: <1295973114.3588.312.camel@edumazet-laptop>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-01-25 16:31:54 +00:00
|
|
|
: "=&a" (pxo_ret__), "+m" (var) \
|
2010-12-14 16:28:44 +00:00
|
|
|
: "r" (pxo_new__) \
|
|
|
|
|
: "memory"); \
|
|
|
|
|
break; \
|
|
|
|
|
case 8: \
|
x86/percpu: Differentiate this_cpu_{}() and __this_cpu_{}()
Nadav Amit reported that commit:
b59167ac7baf ("x86/percpu: Fix this_cpu_read()")
added a bunch of constraints to all sorts of code; and while some of
that was correct and desired, some of that seems superfluous.
The thing is, the this_cpu_*() operations are defined IRQ-safe, this
means the values are subject to change from IRQs, and thus must be
reloaded.
Also, the generic form:
local_irq_save()
__this_cpu_read()
local_irq_restore()
would not allow the re-use of previous values; if by nothing else,
then the barrier()s implied by local_irq_*().
Which raises the point that percpu_from_op() and the others also need
that volatile.
OTOH __this_cpu_*() operations are not IRQ-safe and assume external
preempt/IRQ disabling and could thus be allowed more room for
optimization.
This makes the this_cpu_*() vs __this_cpu_*() behaviour more
consistent with other architectures.
$ ./compare.sh defconfig-build defconfig-build1 vmlinux.o
x86_pmu_cancel_txn 80 71 -9,+0
__text_poke 919 964 +45,+0
do_user_addr_fault 1082 1058 -24,+0
__do_page_fault 1194 1178 -16,+0
do_exit 2995 3027 -43,+75
process_one_work 1008 989 -67,+48
finish_task_switch 524 505 -19,+0
__schedule_bug 103 98 -59,+54
__schedule_bug 103 98 -59,+54
__sched_setscheduler 2015 2030 +15,+0
freeze_processes 203 230 +31,-4
rcu_gp_kthread_wake 106 99 -7,+0
rcu_core 1841 1834 -7,+0
call_timer_fn 298 286 -12,+0
can_stop_idle_tick 146 139 -31,+24
perf_pending_event 253 239 -14,+0
shmem_alloc_page 209 213 +4,+0
__alloc_pages_slowpath 3284 3269 -15,+0
umount_tree 671 694 +23,+0
advance_transaction 803 798 -5,+0
con_put_char 71 51 -20,+0
xhci_urb_enqueue 1302 1295 -7,+0
xhci_urb_enqueue 1302 1295 -7,+0
tcp_sacktag_write_queue 2130 2075 -55,+0
tcp_try_undo_loss 229 208 -21,+0
tcp_v4_inbound_md5_hash 438 411 -31,+4
tcp_v4_inbound_md5_hash 438 411 -31,+4
tcp_v6_inbound_md5_hash 469 411 -33,-25
tcp_v6_inbound_md5_hash 469 411 -33,-25
restricted_pointer 434 420 -14,+0
irq_exit 162 154 -8,+0
get_perf_callchain 638 624 -14,+0
rt_mutex_trylock 169 156 -13,+0
avc_has_extended_perms 1092 1089 -3,+0
avc_has_perm_noaudit 309 306 -3,+0
__perf_sw_event 138 122 -16,+0
perf_swevent_get_recursion_context 116 102 -14,+0
__local_bh_enable_ip 93 72 -21,+0
xfrm_input 4175 4161 -14,+0
avc_has_perm 446 443 -3,+0
vm_events_fold_cpu 57 56 -1,+0
vfree 68 61 -7,+0
freeze_processes 203 230 +31,-4
_local_bh_enable 44 30 -14,+0
ip_do_fragment 1982 1944 -38,+0
do_exit 2995 3027 -43,+75
__do_softirq 742 724 -18,+0
cpu_init 1510 1489 -21,+0
account_system_time 80 79 -1,+0
total 12985281 12984819 -742,+280
Reported-by: Nadav Amit <nadav.amit@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20181206112433.GB13675@hirez.programming.kicks-ass.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-12-06 11:24:33 +00:00
|
|
|
asm qual ("\n\tmov "__percpu_arg(1)",%%rax" \
|
percpu, x86: Fix percpu_xchg_op()
These recent percpu commits:
2485b6464cf8: x86,percpu: Move out of place 64 bit ops into X86_64 section
8270137a0d50: cpuops: Use cmpxchg for xchg to avoid lock semantics
Caused this 'perf top' crash:
Kernel panic - not syncing: Fatal exception in interrupt
Pid: 0, comm: swapper Tainted: G D
2.6.38-rc2-00181-gef71723 #413 Call Trace: <IRQ> [<ffffffff810465b5>]
? panic
? kmsg_dump
? kmsg_dump
? oops_end
? no_context
? __bad_area_nosemaphore
? perf_output_begin
? bad_area_nosemaphore
? do_page_fault
? __task_pid_nr_ns
? perf_event_tid
? __perf_event_header__init_id
? validate_chain
? perf_output_sample
? trace_hardirqs_off
? page_fault
? irq_work_run
? update_process_times
? tick_sched_timer
? tick_sched_timer
? __run_hrtimer
? hrtimer_interrupt
? account_system_vtime
? smp_apic_timer_interrupt
? apic_timer_interrupt
...
Looking at assembly code, I found:
list = this_cpu_xchg(irq_work_list, NULL);
gives this wrong code : (gcc-4.1.2 cross compiler)
ffffffff810bc45e:
mov %gs:0xead0,%rax
cmpxchg %rax,%gs:0xead0
jne ffffffff810bc45e <irq_work_run+0x3e>
test %rax,%rax
je ffffffff810bc4aa <irq_work_run+0x8a>
Tell gcc we dirty eax/rax register in percpu_xchg_op()
Compiler must use another register to store pxo_new__
We also dont need to reload percpu value after a jump,
since a 'failed' cmpxchg already updated eax/rax
Wrong generated code was :
xor %rax,%rax /* load 0 into %rax */
1: mov %gs:0xead0,%rax
cmpxchg %rax,%gs:0xead0
jne 1b
test %rax,%rax
After patch :
xor %rdx,%rdx /* load 0 into %rdx */
mov %gs:0xead0,%rax
1: cmpxchg %rdx,%gs:0xead0
jne 1b:
test %rax,%rax
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Christoph Lameter <cl@linux-foundation.org>
Cc: Tejun Heo <tj@kernel.org>
LKML-Reference: <1295973114.3588.312.camel@edumazet-laptop>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-01-25 16:31:54 +00:00
|
|
|
"\n1:\tcmpxchgq %2, "__percpu_arg(1) \
|
2010-12-14 16:28:47 +00:00
|
|
|
"\n\tjnz 1b" \
|
percpu, x86: Fix percpu_xchg_op()
These recent percpu commits:
2485b6464cf8: x86,percpu: Move out of place 64 bit ops into X86_64 section
8270137a0d50: cpuops: Use cmpxchg for xchg to avoid lock semantics
Caused this 'perf top' crash:
Kernel panic - not syncing: Fatal exception in interrupt
Pid: 0, comm: swapper Tainted: G D
2.6.38-rc2-00181-gef71723 #413 Call Trace: <IRQ> [<ffffffff810465b5>]
? panic
? kmsg_dump
? kmsg_dump
? oops_end
? no_context
? __bad_area_nosemaphore
? perf_output_begin
? bad_area_nosemaphore
? do_page_fault
? __task_pid_nr_ns
? perf_event_tid
? __perf_event_header__init_id
? validate_chain
? perf_output_sample
? trace_hardirqs_off
? page_fault
? irq_work_run
? update_process_times
? tick_sched_timer
? tick_sched_timer
? __run_hrtimer
? hrtimer_interrupt
? account_system_vtime
? smp_apic_timer_interrupt
? apic_timer_interrupt
...
Looking at assembly code, I found:
list = this_cpu_xchg(irq_work_list, NULL);
gives this wrong code : (gcc-4.1.2 cross compiler)
ffffffff810bc45e:
mov %gs:0xead0,%rax
cmpxchg %rax,%gs:0xead0
jne ffffffff810bc45e <irq_work_run+0x3e>
test %rax,%rax
je ffffffff810bc4aa <irq_work_run+0x8a>
Tell gcc we dirty eax/rax register in percpu_xchg_op()
Compiler must use another register to store pxo_new__
We also dont need to reload percpu value after a jump,
since a 'failed' cmpxchg already updated eax/rax
Wrong generated code was :
xor %rax,%rax /* load 0 into %rax */
1: mov %gs:0xead0,%rax
cmpxchg %rax,%gs:0xead0
jne 1b
test %rax,%rax
After patch :
xor %rdx,%rdx /* load 0 into %rdx */
mov %gs:0xead0,%rax
1: cmpxchg %rdx,%gs:0xead0
jne 1b:
test %rax,%rax
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Christoph Lameter <cl@linux-foundation.org>
Cc: Tejun Heo <tj@kernel.org>
LKML-Reference: <1295973114.3588.312.camel@edumazet-laptop>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-01-25 16:31:54 +00:00
|
|
|
: "=&a" (pxo_ret__), "+m" (var) \
|
2010-12-14 16:28:44 +00:00
|
|
|
: "r" (pxo_new__) \
|
|
|
|
|
: "memory"); \
|
|
|
|
|
break; \
|
|
|
|
|
default: __bad_percpu_size(); \
|
|
|
|
|
} \
|
|
|
|
|
pxo_ret__; \
|
|
|
|
|
})
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* cmpxchg has no such implied lock semantics as a result it is much
|
|
|
|
|
* more efficient for cpu local operations.
|
|
|
|
|
*/
|
x86/percpu: Differentiate this_cpu_{}() and __this_cpu_{}()
Nadav Amit reported that commit:
b59167ac7baf ("x86/percpu: Fix this_cpu_read()")
added a bunch of constraints to all sorts of code; and while some of
that was correct and desired, some of that seems superfluous.
The thing is, the this_cpu_*() operations are defined IRQ-safe, this
means the values are subject to change from IRQs, and thus must be
reloaded.
Also, the generic form:
local_irq_save()
__this_cpu_read()
local_irq_restore()
would not allow the re-use of previous values; if by nothing else,
then the barrier()s implied by local_irq_*().
Which raises the point that percpu_from_op() and the others also need
that volatile.
OTOH __this_cpu_*() operations are not IRQ-safe and assume external
preempt/IRQ disabling and could thus be allowed more room for
optimization.
This makes the this_cpu_*() vs __this_cpu_*() behaviour more
consistent with other architectures.
$ ./compare.sh defconfig-build defconfig-build1 vmlinux.o
x86_pmu_cancel_txn 80 71 -9,+0
__text_poke 919 964 +45,+0
do_user_addr_fault 1082 1058 -24,+0
__do_page_fault 1194 1178 -16,+0
do_exit 2995 3027 -43,+75
process_one_work 1008 989 -67,+48
finish_task_switch 524 505 -19,+0
__schedule_bug 103 98 -59,+54
__schedule_bug 103 98 -59,+54
__sched_setscheduler 2015 2030 +15,+0
freeze_processes 203 230 +31,-4
rcu_gp_kthread_wake 106 99 -7,+0
rcu_core 1841 1834 -7,+0
call_timer_fn 298 286 -12,+0
can_stop_idle_tick 146 139 -31,+24
perf_pending_event 253 239 -14,+0
shmem_alloc_page 209 213 +4,+0
__alloc_pages_slowpath 3284 3269 -15,+0
umount_tree 671 694 +23,+0
advance_transaction 803 798 -5,+0
con_put_char 71 51 -20,+0
xhci_urb_enqueue 1302 1295 -7,+0
xhci_urb_enqueue 1302 1295 -7,+0
tcp_sacktag_write_queue 2130 2075 -55,+0
tcp_try_undo_loss 229 208 -21,+0
tcp_v4_inbound_md5_hash 438 411 -31,+4
tcp_v4_inbound_md5_hash 438 411 -31,+4
tcp_v6_inbound_md5_hash 469 411 -33,-25
tcp_v6_inbound_md5_hash 469 411 -33,-25
restricted_pointer 434 420 -14,+0
irq_exit 162 154 -8,+0
get_perf_callchain 638 624 -14,+0
rt_mutex_trylock 169 156 -13,+0
avc_has_extended_perms 1092 1089 -3,+0
avc_has_perm_noaudit 309 306 -3,+0
__perf_sw_event 138 122 -16,+0
perf_swevent_get_recursion_context 116 102 -14,+0
__local_bh_enable_ip 93 72 -21,+0
xfrm_input 4175 4161 -14,+0
avc_has_perm 446 443 -3,+0
vm_events_fold_cpu 57 56 -1,+0
vfree 68 61 -7,+0
freeze_processes 203 230 +31,-4
_local_bh_enable 44 30 -14,+0
ip_do_fragment 1982 1944 -38,+0
do_exit 2995 3027 -43,+75
__do_softirq 742 724 -18,+0
cpu_init 1510 1489 -21,+0
account_system_time 80 79 -1,+0
total 12985281 12984819 -742,+280
Reported-by: Nadav Amit <nadav.amit@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20181206112433.GB13675@hirez.programming.kicks-ass.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-12-06 11:24:33 +00:00
|
|
|
#define percpu_cmpxchg_op(qual, var, oval, nval) \
|
2010-12-14 16:28:44 +00:00
|
|
|
({ \
|
|
|
|
|
typeof(var) pco_ret__; \
|
|
|
|
|
typeof(var) pco_old__ = (oval); \
|
|
|
|
|
typeof(var) pco_new__ = (nval); \
|
|
|
|
|
switch (sizeof(var)) { \
|
|
|
|
|
case 1: \
|
x86/percpu: Differentiate this_cpu_{}() and __this_cpu_{}()
Nadav Amit reported that commit:
b59167ac7baf ("x86/percpu: Fix this_cpu_read()")
added a bunch of constraints to all sorts of code; and while some of
that was correct and desired, some of that seems superfluous.
The thing is, the this_cpu_*() operations are defined IRQ-safe, this
means the values are subject to change from IRQs, and thus must be
reloaded.
Also, the generic form:
local_irq_save()
__this_cpu_read()
local_irq_restore()
would not allow the re-use of previous values; if by nothing else,
then the barrier()s implied by local_irq_*().
Which raises the point that percpu_from_op() and the others also need
that volatile.
OTOH __this_cpu_*() operations are not IRQ-safe and assume external
preempt/IRQ disabling and could thus be allowed more room for
optimization.
This makes the this_cpu_*() vs __this_cpu_*() behaviour more
consistent with other architectures.
$ ./compare.sh defconfig-build defconfig-build1 vmlinux.o
x86_pmu_cancel_txn 80 71 -9,+0
__text_poke 919 964 +45,+0
do_user_addr_fault 1082 1058 -24,+0
__do_page_fault 1194 1178 -16,+0
do_exit 2995 3027 -43,+75
process_one_work 1008 989 -67,+48
finish_task_switch 524 505 -19,+0
__schedule_bug 103 98 -59,+54
__schedule_bug 103 98 -59,+54
__sched_setscheduler 2015 2030 +15,+0
freeze_processes 203 230 +31,-4
rcu_gp_kthread_wake 106 99 -7,+0
rcu_core 1841 1834 -7,+0
call_timer_fn 298 286 -12,+0
can_stop_idle_tick 146 139 -31,+24
perf_pending_event 253 239 -14,+0
shmem_alloc_page 209 213 +4,+0
__alloc_pages_slowpath 3284 3269 -15,+0
umount_tree 671 694 +23,+0
advance_transaction 803 798 -5,+0
con_put_char 71 51 -20,+0
xhci_urb_enqueue 1302 1295 -7,+0
xhci_urb_enqueue 1302 1295 -7,+0
tcp_sacktag_write_queue 2130 2075 -55,+0
tcp_try_undo_loss 229 208 -21,+0
tcp_v4_inbound_md5_hash 438 411 -31,+4
tcp_v4_inbound_md5_hash 438 411 -31,+4
tcp_v6_inbound_md5_hash 469 411 -33,-25
tcp_v6_inbound_md5_hash 469 411 -33,-25
restricted_pointer 434 420 -14,+0
irq_exit 162 154 -8,+0
get_perf_callchain 638 624 -14,+0
rt_mutex_trylock 169 156 -13,+0
avc_has_extended_perms 1092 1089 -3,+0
avc_has_perm_noaudit 309 306 -3,+0
__perf_sw_event 138 122 -16,+0
perf_swevent_get_recursion_context 116 102 -14,+0
__local_bh_enable_ip 93 72 -21,+0
xfrm_input 4175 4161 -14,+0
avc_has_perm 446 443 -3,+0
vm_events_fold_cpu 57 56 -1,+0
vfree 68 61 -7,+0
freeze_processes 203 230 +31,-4
_local_bh_enable 44 30 -14,+0
ip_do_fragment 1982 1944 -38,+0
do_exit 2995 3027 -43,+75
__do_softirq 742 724 -18,+0
cpu_init 1510 1489 -21,+0
account_system_time 80 79 -1,+0
total 12985281 12984819 -742,+280
Reported-by: Nadav Amit <nadav.amit@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20181206112433.GB13675@hirez.programming.kicks-ass.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-12-06 11:24:33 +00:00
|
|
|
asm qual ("cmpxchgb %2, "__percpu_arg(1) \
|
2010-12-14 16:28:44 +00:00
|
|
|
: "=a" (pco_ret__), "+m" (var) \
|
|
|
|
|
: "q" (pco_new__), "0" (pco_old__) \
|
|
|
|
|
: "memory"); \
|
|
|
|
|
break; \
|
|
|
|
|
case 2: \
|
x86/percpu: Differentiate this_cpu_{}() and __this_cpu_{}()
Nadav Amit reported that commit:
b59167ac7baf ("x86/percpu: Fix this_cpu_read()")
added a bunch of constraints to all sorts of code; and while some of
that was correct and desired, some of that seems superfluous.
The thing is, the this_cpu_*() operations are defined IRQ-safe, this
means the values are subject to change from IRQs, and thus must be
reloaded.
Also, the generic form:
local_irq_save()
__this_cpu_read()
local_irq_restore()
would not allow the re-use of previous values; if by nothing else,
then the barrier()s implied by local_irq_*().
Which raises the point that percpu_from_op() and the others also need
that volatile.
OTOH __this_cpu_*() operations are not IRQ-safe and assume external
preempt/IRQ disabling and could thus be allowed more room for
optimization.
This makes the this_cpu_*() vs __this_cpu_*() behaviour more
consistent with other architectures.
$ ./compare.sh defconfig-build defconfig-build1 vmlinux.o
x86_pmu_cancel_txn 80 71 -9,+0
__text_poke 919 964 +45,+0
do_user_addr_fault 1082 1058 -24,+0
__do_page_fault 1194 1178 -16,+0
do_exit 2995 3027 -43,+75
process_one_work 1008 989 -67,+48
finish_task_switch 524 505 -19,+0
__schedule_bug 103 98 -59,+54
__schedule_bug 103 98 -59,+54
__sched_setscheduler 2015 2030 +15,+0
freeze_processes 203 230 +31,-4
rcu_gp_kthread_wake 106 99 -7,+0
rcu_core 1841 1834 -7,+0
call_timer_fn 298 286 -12,+0
can_stop_idle_tick 146 139 -31,+24
perf_pending_event 253 239 -14,+0
shmem_alloc_page 209 213 +4,+0
__alloc_pages_slowpath 3284 3269 -15,+0
umount_tree 671 694 +23,+0
advance_transaction 803 798 -5,+0
con_put_char 71 51 -20,+0
xhci_urb_enqueue 1302 1295 -7,+0
xhci_urb_enqueue 1302 1295 -7,+0
tcp_sacktag_write_queue 2130 2075 -55,+0
tcp_try_undo_loss 229 208 -21,+0
tcp_v4_inbound_md5_hash 438 411 -31,+4
tcp_v4_inbound_md5_hash 438 411 -31,+4
tcp_v6_inbound_md5_hash 469 411 -33,-25
tcp_v6_inbound_md5_hash 469 411 -33,-25
restricted_pointer 434 420 -14,+0
irq_exit 162 154 -8,+0
get_perf_callchain 638 624 -14,+0
rt_mutex_trylock 169 156 -13,+0
avc_has_extended_perms 1092 1089 -3,+0
avc_has_perm_noaudit 309 306 -3,+0
__perf_sw_event 138 122 -16,+0
perf_swevent_get_recursion_context 116 102 -14,+0
__local_bh_enable_ip 93 72 -21,+0
xfrm_input 4175 4161 -14,+0
avc_has_perm 446 443 -3,+0
vm_events_fold_cpu 57 56 -1,+0
vfree 68 61 -7,+0
freeze_processes 203 230 +31,-4
_local_bh_enable 44 30 -14,+0
ip_do_fragment 1982 1944 -38,+0
do_exit 2995 3027 -43,+75
__do_softirq 742 724 -18,+0
cpu_init 1510 1489 -21,+0
account_system_time 80 79 -1,+0
total 12985281 12984819 -742,+280
Reported-by: Nadav Amit <nadav.amit@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20181206112433.GB13675@hirez.programming.kicks-ass.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-12-06 11:24:33 +00:00
|
|
|
asm qual ("cmpxchgw %2, "__percpu_arg(1) \
|
2010-12-14 16:28:44 +00:00
|
|
|
: "=a" (pco_ret__), "+m" (var) \
|
|
|
|
|
: "r" (pco_new__), "0" (pco_old__) \
|
|
|
|
|
: "memory"); \
|
|
|
|
|
break; \
|
|
|
|
|
case 4: \
|
x86/percpu: Differentiate this_cpu_{}() and __this_cpu_{}()
Nadav Amit reported that commit:
b59167ac7baf ("x86/percpu: Fix this_cpu_read()")
added a bunch of constraints to all sorts of code; and while some of
that was correct and desired, some of that seems superfluous.
The thing is, the this_cpu_*() operations are defined IRQ-safe, this
means the values are subject to change from IRQs, and thus must be
reloaded.
Also, the generic form:
local_irq_save()
__this_cpu_read()
local_irq_restore()
would not allow the re-use of previous values; if by nothing else,
then the barrier()s implied by local_irq_*().
Which raises the point that percpu_from_op() and the others also need
that volatile.
OTOH __this_cpu_*() operations are not IRQ-safe and assume external
preempt/IRQ disabling and could thus be allowed more room for
optimization.
This makes the this_cpu_*() vs __this_cpu_*() behaviour more
consistent with other architectures.
$ ./compare.sh defconfig-build defconfig-build1 vmlinux.o
x86_pmu_cancel_txn 80 71 -9,+0
__text_poke 919 964 +45,+0
do_user_addr_fault 1082 1058 -24,+0
__do_page_fault 1194 1178 -16,+0
do_exit 2995 3027 -43,+75
process_one_work 1008 989 -67,+48
finish_task_switch 524 505 -19,+0
__schedule_bug 103 98 -59,+54
__schedule_bug 103 98 -59,+54
__sched_setscheduler 2015 2030 +15,+0
freeze_processes 203 230 +31,-4
rcu_gp_kthread_wake 106 99 -7,+0
rcu_core 1841 1834 -7,+0
call_timer_fn 298 286 -12,+0
can_stop_idle_tick 146 139 -31,+24
perf_pending_event 253 239 -14,+0
shmem_alloc_page 209 213 +4,+0
__alloc_pages_slowpath 3284 3269 -15,+0
umount_tree 671 694 +23,+0
advance_transaction 803 798 -5,+0
con_put_char 71 51 -20,+0
xhci_urb_enqueue 1302 1295 -7,+0
xhci_urb_enqueue 1302 1295 -7,+0
tcp_sacktag_write_queue 2130 2075 -55,+0
tcp_try_undo_loss 229 208 -21,+0
tcp_v4_inbound_md5_hash 438 411 -31,+4
tcp_v4_inbound_md5_hash 438 411 -31,+4
tcp_v6_inbound_md5_hash 469 411 -33,-25
tcp_v6_inbound_md5_hash 469 411 -33,-25
restricted_pointer 434 420 -14,+0
irq_exit 162 154 -8,+0
get_perf_callchain 638 624 -14,+0
rt_mutex_trylock 169 156 -13,+0
avc_has_extended_perms 1092 1089 -3,+0
avc_has_perm_noaudit 309 306 -3,+0
__perf_sw_event 138 122 -16,+0
perf_swevent_get_recursion_context 116 102 -14,+0
__local_bh_enable_ip 93 72 -21,+0
xfrm_input 4175 4161 -14,+0
avc_has_perm 446 443 -3,+0
vm_events_fold_cpu 57 56 -1,+0
vfree 68 61 -7,+0
freeze_processes 203 230 +31,-4
_local_bh_enable 44 30 -14,+0
ip_do_fragment 1982 1944 -38,+0
do_exit 2995 3027 -43,+75
__do_softirq 742 724 -18,+0
cpu_init 1510 1489 -21,+0
account_system_time 80 79 -1,+0
total 12985281 12984819 -742,+280
Reported-by: Nadav Amit <nadav.amit@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20181206112433.GB13675@hirez.programming.kicks-ass.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-12-06 11:24:33 +00:00
|
|
|
asm qual ("cmpxchgl %2, "__percpu_arg(1) \
|
2010-12-14 16:28:44 +00:00
|
|
|
: "=a" (pco_ret__), "+m" (var) \
|
|
|
|
|
: "r" (pco_new__), "0" (pco_old__) \
|
|
|
|
|
: "memory"); \
|
|
|
|
|
break; \
|
|
|
|
|
case 8: \
|
x86/percpu: Differentiate this_cpu_{}() and __this_cpu_{}()
Nadav Amit reported that commit:
b59167ac7baf ("x86/percpu: Fix this_cpu_read()")
added a bunch of constraints to all sorts of code; and while some of
that was correct and desired, some of that seems superfluous.
The thing is, the this_cpu_*() operations are defined IRQ-safe, this
means the values are subject to change from IRQs, and thus must be
reloaded.
Also, the generic form:
local_irq_save()
__this_cpu_read()
local_irq_restore()
would not allow the re-use of previous values; if by nothing else,
then the barrier()s implied by local_irq_*().
Which raises the point that percpu_from_op() and the others also need
that volatile.
OTOH __this_cpu_*() operations are not IRQ-safe and assume external
preempt/IRQ disabling and could thus be allowed more room for
optimization.
This makes the this_cpu_*() vs __this_cpu_*() behaviour more
consistent with other architectures.
$ ./compare.sh defconfig-build defconfig-build1 vmlinux.o
x86_pmu_cancel_txn 80 71 -9,+0
__text_poke 919 964 +45,+0
do_user_addr_fault 1082 1058 -24,+0
__do_page_fault 1194 1178 -16,+0
do_exit 2995 3027 -43,+75
process_one_work 1008 989 -67,+48
finish_task_switch 524 505 -19,+0
__schedule_bug 103 98 -59,+54
__schedule_bug 103 98 -59,+54
__sched_setscheduler 2015 2030 +15,+0
freeze_processes 203 230 +31,-4
rcu_gp_kthread_wake 106 99 -7,+0
rcu_core 1841 1834 -7,+0
call_timer_fn 298 286 -12,+0
can_stop_idle_tick 146 139 -31,+24
perf_pending_event 253 239 -14,+0
shmem_alloc_page 209 213 +4,+0
__alloc_pages_slowpath 3284 3269 -15,+0
umount_tree 671 694 +23,+0
advance_transaction 803 798 -5,+0
con_put_char 71 51 -20,+0
xhci_urb_enqueue 1302 1295 -7,+0
xhci_urb_enqueue 1302 1295 -7,+0
tcp_sacktag_write_queue 2130 2075 -55,+0
tcp_try_undo_loss 229 208 -21,+0
tcp_v4_inbound_md5_hash 438 411 -31,+4
tcp_v4_inbound_md5_hash 438 411 -31,+4
tcp_v6_inbound_md5_hash 469 411 -33,-25
tcp_v6_inbound_md5_hash 469 411 -33,-25
restricted_pointer 434 420 -14,+0
irq_exit 162 154 -8,+0
get_perf_callchain 638 624 -14,+0
rt_mutex_trylock 169 156 -13,+0
avc_has_extended_perms 1092 1089 -3,+0
avc_has_perm_noaudit 309 306 -3,+0
__perf_sw_event 138 122 -16,+0
perf_swevent_get_recursion_context 116 102 -14,+0
__local_bh_enable_ip 93 72 -21,+0
xfrm_input 4175 4161 -14,+0
avc_has_perm 446 443 -3,+0
vm_events_fold_cpu 57 56 -1,+0
vfree 68 61 -7,+0
freeze_processes 203 230 +31,-4
_local_bh_enable 44 30 -14,+0
ip_do_fragment 1982 1944 -38,+0
do_exit 2995 3027 -43,+75
__do_softirq 742 724 -18,+0
cpu_init 1510 1489 -21,+0
account_system_time 80 79 -1,+0
total 12985281 12984819 -742,+280
Reported-by: Nadav Amit <nadav.amit@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20181206112433.GB13675@hirez.programming.kicks-ass.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-12-06 11:24:33 +00:00
|
|
|
asm qual ("cmpxchgq %2, "__percpu_arg(1) \
|
2010-12-14 16:28:44 +00:00
|
|
|
: "=a" (pco_ret__), "+m" (var) \
|
|
|
|
|
: "r" (pco_new__), "0" (pco_old__) \
|
|
|
|
|
: "memory"); \
|
|
|
|
|
break; \
|
|
|
|
|
default: __bad_percpu_size(); \
|
|
|
|
|
} \
|
|
|
|
|
pco_ret__; \
|
|
|
|
|
})
|
|
|
|
|
|
2009-08-03 05:08:48 +00:00
|
|
|
/*
|
2012-05-14 21:15:32 +00:00
|
|
|
* this_cpu_read() makes gcc load the percpu variable every time it is
|
2012-05-11 07:35:27 +00:00
|
|
|
* accessed while this_cpu_read_stable() allows the value to be cached.
|
|
|
|
|
* this_cpu_read_stable() is more efficient and can be used if its value
|
2009-08-03 05:08:48 +00:00
|
|
|
* is guaranteed to be valid across cpus. The current users include
|
|
|
|
|
* get_current() and get_thread_info() both of which are actually
|
|
|
|
|
* per-thread variables implemented as per-cpu variables and thus
|
|
|
|
|
* stable for the duration of the respective task.
|
|
|
|
|
*/
|
2014-11-04 08:50:48 +00:00
|
|
|
#define this_cpu_read_stable(var) percpu_stable_op("mov", var)
|
2009-01-13 11:41:35 +00:00
|
|
|
|
x86/percpu: Differentiate this_cpu_{}() and __this_cpu_{}()
Nadav Amit reported that commit:
b59167ac7baf ("x86/percpu: Fix this_cpu_read()")
added a bunch of constraints to all sorts of code; and while some of
that was correct and desired, some of that seems superfluous.
The thing is, the this_cpu_*() operations are defined IRQ-safe, this
means the values are subject to change from IRQs, and thus must be
reloaded.
Also, the generic form:
local_irq_save()
__this_cpu_read()
local_irq_restore()
would not allow the re-use of previous values; if by nothing else,
then the barrier()s implied by local_irq_*().
Which raises the point that percpu_from_op() and the others also need
that volatile.
OTOH __this_cpu_*() operations are not IRQ-safe and assume external
preempt/IRQ disabling and could thus be allowed more room for
optimization.
This makes the this_cpu_*() vs __this_cpu_*() behaviour more
consistent with other architectures.
$ ./compare.sh defconfig-build defconfig-build1 vmlinux.o
x86_pmu_cancel_txn 80 71 -9,+0
__text_poke 919 964 +45,+0
do_user_addr_fault 1082 1058 -24,+0
__do_page_fault 1194 1178 -16,+0
do_exit 2995 3027 -43,+75
process_one_work 1008 989 -67,+48
finish_task_switch 524 505 -19,+0
__schedule_bug 103 98 -59,+54
__schedule_bug 103 98 -59,+54
__sched_setscheduler 2015 2030 +15,+0
freeze_processes 203 230 +31,-4
rcu_gp_kthread_wake 106 99 -7,+0
rcu_core 1841 1834 -7,+0
call_timer_fn 298 286 -12,+0
can_stop_idle_tick 146 139 -31,+24
perf_pending_event 253 239 -14,+0
shmem_alloc_page 209 213 +4,+0
__alloc_pages_slowpath 3284 3269 -15,+0
umount_tree 671 694 +23,+0
advance_transaction 803 798 -5,+0
con_put_char 71 51 -20,+0
xhci_urb_enqueue 1302 1295 -7,+0
xhci_urb_enqueue 1302 1295 -7,+0
tcp_sacktag_write_queue 2130 2075 -55,+0
tcp_try_undo_loss 229 208 -21,+0
tcp_v4_inbound_md5_hash 438 411 -31,+4
tcp_v4_inbound_md5_hash 438 411 -31,+4
tcp_v6_inbound_md5_hash 469 411 -33,-25
tcp_v6_inbound_md5_hash 469 411 -33,-25
restricted_pointer 434 420 -14,+0
irq_exit 162 154 -8,+0
get_perf_callchain 638 624 -14,+0
rt_mutex_trylock 169 156 -13,+0
avc_has_extended_perms 1092 1089 -3,+0
avc_has_perm_noaudit 309 306 -3,+0
__perf_sw_event 138 122 -16,+0
perf_swevent_get_recursion_context 116 102 -14,+0
__local_bh_enable_ip 93 72 -21,+0
xfrm_input 4175 4161 -14,+0
avc_has_perm 446 443 -3,+0
vm_events_fold_cpu 57 56 -1,+0
vfree 68 61 -7,+0
freeze_processes 203 230 +31,-4
_local_bh_enable 44 30 -14,+0
ip_do_fragment 1982 1944 -38,+0
do_exit 2995 3027 -43,+75
__do_softirq 742 724 -18,+0
cpu_init 1510 1489 -21,+0
account_system_time 80 79 -1,+0
total 12985281 12984819 -742,+280
Reported-by: Nadav Amit <nadav.amit@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20181206112433.GB13675@hirez.programming.kicks-ass.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-12-06 11:24:33 +00:00
|
|
|
#define raw_cpu_read_1(pcp) percpu_from_op(, "mov", pcp)
|
|
|
|
|
#define raw_cpu_read_2(pcp) percpu_from_op(, "mov", pcp)
|
|
|
|
|
#define raw_cpu_read_4(pcp) percpu_from_op(, "mov", pcp)
|
2014-04-07 22:39:34 +00:00
|
|
|
|
x86/percpu: Differentiate this_cpu_{}() and __this_cpu_{}()
Nadav Amit reported that commit:
b59167ac7baf ("x86/percpu: Fix this_cpu_read()")
added a bunch of constraints to all sorts of code; and while some of
that was correct and desired, some of that seems superfluous.
The thing is, the this_cpu_*() operations are defined IRQ-safe, this
means the values are subject to change from IRQs, and thus must be
reloaded.
Also, the generic form:
local_irq_save()
__this_cpu_read()
local_irq_restore()
would not allow the re-use of previous values; if by nothing else,
then the barrier()s implied by local_irq_*().
Which raises the point that percpu_from_op() and the others also need
that volatile.
OTOH __this_cpu_*() operations are not IRQ-safe and assume external
preempt/IRQ disabling and could thus be allowed more room for
optimization.
This makes the this_cpu_*() vs __this_cpu_*() behaviour more
consistent with other architectures.
$ ./compare.sh defconfig-build defconfig-build1 vmlinux.o
x86_pmu_cancel_txn 80 71 -9,+0
__text_poke 919 964 +45,+0
do_user_addr_fault 1082 1058 -24,+0
__do_page_fault 1194 1178 -16,+0
do_exit 2995 3027 -43,+75
process_one_work 1008 989 -67,+48
finish_task_switch 524 505 -19,+0
__schedule_bug 103 98 -59,+54
__schedule_bug 103 98 -59,+54
__sched_setscheduler 2015 2030 +15,+0
freeze_processes 203 230 +31,-4
rcu_gp_kthread_wake 106 99 -7,+0
rcu_core 1841 1834 -7,+0
call_timer_fn 298 286 -12,+0
can_stop_idle_tick 146 139 -31,+24
perf_pending_event 253 239 -14,+0
shmem_alloc_page 209 213 +4,+0
__alloc_pages_slowpath 3284 3269 -15,+0
umount_tree 671 694 +23,+0
advance_transaction 803 798 -5,+0
con_put_char 71 51 -20,+0
xhci_urb_enqueue 1302 1295 -7,+0
xhci_urb_enqueue 1302 1295 -7,+0
tcp_sacktag_write_queue 2130 2075 -55,+0
tcp_try_undo_loss 229 208 -21,+0
tcp_v4_inbound_md5_hash 438 411 -31,+4
tcp_v4_inbound_md5_hash 438 411 -31,+4
tcp_v6_inbound_md5_hash 469 411 -33,-25
tcp_v6_inbound_md5_hash 469 411 -33,-25
restricted_pointer 434 420 -14,+0
irq_exit 162 154 -8,+0
get_perf_callchain 638 624 -14,+0
rt_mutex_trylock 169 156 -13,+0
avc_has_extended_perms 1092 1089 -3,+0
avc_has_perm_noaudit 309 306 -3,+0
__perf_sw_event 138 122 -16,+0
perf_swevent_get_recursion_context 116 102 -14,+0
__local_bh_enable_ip 93 72 -21,+0
xfrm_input 4175 4161 -14,+0
avc_has_perm 446 443 -3,+0
vm_events_fold_cpu 57 56 -1,+0
vfree 68 61 -7,+0
freeze_processes 203 230 +31,-4
_local_bh_enable 44 30 -14,+0
ip_do_fragment 1982 1944 -38,+0
do_exit 2995 3027 -43,+75
__do_softirq 742 724 -18,+0
cpu_init 1510 1489 -21,+0
account_system_time 80 79 -1,+0
total 12985281 12984819 -742,+280
Reported-by: Nadav Amit <nadav.amit@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20181206112433.GB13675@hirez.programming.kicks-ass.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-12-06 11:24:33 +00:00
|
|
|
#define raw_cpu_write_1(pcp, val) percpu_to_op(, "mov", (pcp), val)
|
|
|
|
|
#define raw_cpu_write_2(pcp, val) percpu_to_op(, "mov", (pcp), val)
|
|
|
|
|
#define raw_cpu_write_4(pcp, val) percpu_to_op(, "mov", (pcp), val)
|
|
|
|
|
#define raw_cpu_add_1(pcp, val) percpu_add_op(, (pcp), val)
|
|
|
|
|
#define raw_cpu_add_2(pcp, val) percpu_add_op(, (pcp), val)
|
|
|
|
|
#define raw_cpu_add_4(pcp, val) percpu_add_op(, (pcp), val)
|
|
|
|
|
#define raw_cpu_and_1(pcp, val) percpu_to_op(, "and", (pcp), val)
|
|
|
|
|
#define raw_cpu_and_2(pcp, val) percpu_to_op(, "and", (pcp), val)
|
|
|
|
|
#define raw_cpu_and_4(pcp, val) percpu_to_op(, "and", (pcp), val)
|
|
|
|
|
#define raw_cpu_or_1(pcp, val) percpu_to_op(, "or", (pcp), val)
|
|
|
|
|
#define raw_cpu_or_2(pcp, val) percpu_to_op(, "or", (pcp), val)
|
|
|
|
|
#define raw_cpu_or_4(pcp, val) percpu_to_op(, "or", (pcp), val)
|
|
|
|
|
#define raw_cpu_xchg_1(pcp, val) percpu_xchg_op(, pcp, val)
|
|
|
|
|
#define raw_cpu_xchg_2(pcp, val) percpu_xchg_op(, pcp, val)
|
|
|
|
|
#define raw_cpu_xchg_4(pcp, val) percpu_xchg_op(, pcp, val)
|
2009-10-03 10:48:22 +00:00
|
|
|
|
x86/percpu: Differentiate this_cpu_{}() and __this_cpu_{}()
Nadav Amit reported that commit:
b59167ac7baf ("x86/percpu: Fix this_cpu_read()")
added a bunch of constraints to all sorts of code; and while some of
that was correct and desired, some of that seems superfluous.
The thing is, the this_cpu_*() operations are defined IRQ-safe, this
means the values are subject to change from IRQs, and thus must be
reloaded.
Also, the generic form:
local_irq_save()
__this_cpu_read()
local_irq_restore()
would not allow the re-use of previous values; if by nothing else,
then the barrier()s implied by local_irq_*().
Which raises the point that percpu_from_op() and the others also need
that volatile.
OTOH __this_cpu_*() operations are not IRQ-safe and assume external
preempt/IRQ disabling and could thus be allowed more room for
optimization.
This makes the this_cpu_*() vs __this_cpu_*() behaviour more
consistent with other architectures.
$ ./compare.sh defconfig-build defconfig-build1 vmlinux.o
x86_pmu_cancel_txn 80 71 -9,+0
__text_poke 919 964 +45,+0
do_user_addr_fault 1082 1058 -24,+0
__do_page_fault 1194 1178 -16,+0
do_exit 2995 3027 -43,+75
process_one_work 1008 989 -67,+48
finish_task_switch 524 505 -19,+0
__schedule_bug 103 98 -59,+54
__schedule_bug 103 98 -59,+54
__sched_setscheduler 2015 2030 +15,+0
freeze_processes 203 230 +31,-4
rcu_gp_kthread_wake 106 99 -7,+0
rcu_core 1841 1834 -7,+0
call_timer_fn 298 286 -12,+0
can_stop_idle_tick 146 139 -31,+24
perf_pending_event 253 239 -14,+0
shmem_alloc_page 209 213 +4,+0
__alloc_pages_slowpath 3284 3269 -15,+0
umount_tree 671 694 +23,+0
advance_transaction 803 798 -5,+0
con_put_char 71 51 -20,+0
xhci_urb_enqueue 1302 1295 -7,+0
xhci_urb_enqueue 1302 1295 -7,+0
tcp_sacktag_write_queue 2130 2075 -55,+0
tcp_try_undo_loss 229 208 -21,+0
tcp_v4_inbound_md5_hash 438 411 -31,+4
tcp_v4_inbound_md5_hash 438 411 -31,+4
tcp_v6_inbound_md5_hash 469 411 -33,-25
tcp_v6_inbound_md5_hash 469 411 -33,-25
restricted_pointer 434 420 -14,+0
irq_exit 162 154 -8,+0
get_perf_callchain 638 624 -14,+0
rt_mutex_trylock 169 156 -13,+0
avc_has_extended_perms 1092 1089 -3,+0
avc_has_perm_noaudit 309 306 -3,+0
__perf_sw_event 138 122 -16,+0
perf_swevent_get_recursion_context 116 102 -14,+0
__local_bh_enable_ip 93 72 -21,+0
xfrm_input 4175 4161 -14,+0
avc_has_perm 446 443 -3,+0
vm_events_fold_cpu 57 56 -1,+0
vfree 68 61 -7,+0
freeze_processes 203 230 +31,-4
_local_bh_enable 44 30 -14,+0
ip_do_fragment 1982 1944 -38,+0
do_exit 2995 3027 -43,+75
__do_softirq 742 724 -18,+0
cpu_init 1510 1489 -21,+0
account_system_time 80 79 -1,+0
total 12985281 12984819 -742,+280
Reported-by: Nadav Amit <nadav.amit@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20181206112433.GB13675@hirez.programming.kicks-ass.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-12-06 11:24:33 +00:00
|
|
|
#define this_cpu_read_1(pcp) percpu_from_op(volatile, "mov", pcp)
|
|
|
|
|
#define this_cpu_read_2(pcp) percpu_from_op(volatile, "mov", pcp)
|
|
|
|
|
#define this_cpu_read_4(pcp) percpu_from_op(volatile, "mov", pcp)
|
|
|
|
|
#define this_cpu_write_1(pcp, val) percpu_to_op(volatile, "mov", (pcp), val)
|
|
|
|
|
#define this_cpu_write_2(pcp, val) percpu_to_op(volatile, "mov", (pcp), val)
|
|
|
|
|
#define this_cpu_write_4(pcp, val) percpu_to_op(volatile, "mov", (pcp), val)
|
|
|
|
|
#define this_cpu_add_1(pcp, val) percpu_add_op(volatile, (pcp), val)
|
|
|
|
|
#define this_cpu_add_2(pcp, val) percpu_add_op(volatile, (pcp), val)
|
|
|
|
|
#define this_cpu_add_4(pcp, val) percpu_add_op(volatile, (pcp), val)
|
|
|
|
|
#define this_cpu_and_1(pcp, val) percpu_to_op(volatile, "and", (pcp), val)
|
|
|
|
|
#define this_cpu_and_2(pcp, val) percpu_to_op(volatile, "and", (pcp), val)
|
|
|
|
|
#define this_cpu_and_4(pcp, val) percpu_to_op(volatile, "and", (pcp), val)
|
|
|
|
|
#define this_cpu_or_1(pcp, val) percpu_to_op(volatile, "or", (pcp), val)
|
|
|
|
|
#define this_cpu_or_2(pcp, val) percpu_to_op(volatile, "or", (pcp), val)
|
|
|
|
|
#define this_cpu_or_4(pcp, val) percpu_to_op(volatile, "or", (pcp), val)
|
|
|
|
|
#define this_cpu_xchg_1(pcp, nval) percpu_xchg_op(volatile, pcp, nval)
|
|
|
|
|
#define this_cpu_xchg_2(pcp, nval) percpu_xchg_op(volatile, pcp, nval)
|
|
|
|
|
#define this_cpu_xchg_4(pcp, nval) percpu_xchg_op(volatile, pcp, nval)
|
2009-10-03 10:48:22 +00:00
|
|
|
|
x86/percpu: Differentiate this_cpu_{}() and __this_cpu_{}()
Nadav Amit reported that commit:
b59167ac7baf ("x86/percpu: Fix this_cpu_read()")
added a bunch of constraints to all sorts of code; and while some of
that was correct and desired, some of that seems superfluous.
The thing is, the this_cpu_*() operations are defined IRQ-safe, this
means the values are subject to change from IRQs, and thus must be
reloaded.
Also, the generic form:
local_irq_save()
__this_cpu_read()
local_irq_restore()
would not allow the re-use of previous values; if by nothing else,
then the barrier()s implied by local_irq_*().
Which raises the point that percpu_from_op() and the others also need
that volatile.
OTOH __this_cpu_*() operations are not IRQ-safe and assume external
preempt/IRQ disabling and could thus be allowed more room for
optimization.
This makes the this_cpu_*() vs __this_cpu_*() behaviour more
consistent with other architectures.
$ ./compare.sh defconfig-build defconfig-build1 vmlinux.o
x86_pmu_cancel_txn 80 71 -9,+0
__text_poke 919 964 +45,+0
do_user_addr_fault 1082 1058 -24,+0
__do_page_fault 1194 1178 -16,+0
do_exit 2995 3027 -43,+75
process_one_work 1008 989 -67,+48
finish_task_switch 524 505 -19,+0
__schedule_bug 103 98 -59,+54
__schedule_bug 103 98 -59,+54
__sched_setscheduler 2015 2030 +15,+0
freeze_processes 203 230 +31,-4
rcu_gp_kthread_wake 106 99 -7,+0
rcu_core 1841 1834 -7,+0
call_timer_fn 298 286 -12,+0
can_stop_idle_tick 146 139 -31,+24
perf_pending_event 253 239 -14,+0
shmem_alloc_page 209 213 +4,+0
__alloc_pages_slowpath 3284 3269 -15,+0
umount_tree 671 694 +23,+0
advance_transaction 803 798 -5,+0
con_put_char 71 51 -20,+0
xhci_urb_enqueue 1302 1295 -7,+0
xhci_urb_enqueue 1302 1295 -7,+0
tcp_sacktag_write_queue 2130 2075 -55,+0
tcp_try_undo_loss 229 208 -21,+0
tcp_v4_inbound_md5_hash 438 411 -31,+4
tcp_v4_inbound_md5_hash 438 411 -31,+4
tcp_v6_inbound_md5_hash 469 411 -33,-25
tcp_v6_inbound_md5_hash 469 411 -33,-25
restricted_pointer 434 420 -14,+0
irq_exit 162 154 -8,+0
get_perf_callchain 638 624 -14,+0
rt_mutex_trylock 169 156 -13,+0
avc_has_extended_perms 1092 1089 -3,+0
avc_has_perm_noaudit 309 306 -3,+0
__perf_sw_event 138 122 -16,+0
perf_swevent_get_recursion_context 116 102 -14,+0
__local_bh_enable_ip 93 72 -21,+0
xfrm_input 4175 4161 -14,+0
avc_has_perm 446 443 -3,+0
vm_events_fold_cpu 57 56 -1,+0
vfree 68 61 -7,+0
freeze_processes 203 230 +31,-4
_local_bh_enable 44 30 -14,+0
ip_do_fragment 1982 1944 -38,+0
do_exit 2995 3027 -43,+75
__do_softirq 742 724 -18,+0
cpu_init 1510 1489 -21,+0
account_system_time 80 79 -1,+0
total 12985281 12984819 -742,+280
Reported-by: Nadav Amit <nadav.amit@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20181206112433.GB13675@hirez.programming.kicks-ass.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-12-06 11:24:33 +00:00
|
|
|
#define raw_cpu_add_return_1(pcp, val) percpu_add_return_op(, pcp, val)
|
|
|
|
|
#define raw_cpu_add_return_2(pcp, val) percpu_add_return_op(, pcp, val)
|
|
|
|
|
#define raw_cpu_add_return_4(pcp, val) percpu_add_return_op(, pcp, val)
|
|
|
|
|
#define raw_cpu_cmpxchg_1(pcp, oval, nval) percpu_cmpxchg_op(, pcp, oval, nval)
|
|
|
|
|
#define raw_cpu_cmpxchg_2(pcp, oval, nval) percpu_cmpxchg_op(, pcp, oval, nval)
|
|
|
|
|
#define raw_cpu_cmpxchg_4(pcp, oval, nval) percpu_cmpxchg_op(, pcp, oval, nval)
|
2010-12-14 16:28:44 +00:00
|
|
|
|
x86/percpu: Differentiate this_cpu_{}() and __this_cpu_{}()
Nadav Amit reported that commit:
b59167ac7baf ("x86/percpu: Fix this_cpu_read()")
added a bunch of constraints to all sorts of code; and while some of
that was correct and desired, some of that seems superfluous.
The thing is, the this_cpu_*() operations are defined IRQ-safe, this
means the values are subject to change from IRQs, and thus must be
reloaded.
Also, the generic form:
local_irq_save()
__this_cpu_read()
local_irq_restore()
would not allow the re-use of previous values; if by nothing else,
then the barrier()s implied by local_irq_*().
Which raises the point that percpu_from_op() and the others also need
that volatile.
OTOH __this_cpu_*() operations are not IRQ-safe and assume external
preempt/IRQ disabling and could thus be allowed more room for
optimization.
This makes the this_cpu_*() vs __this_cpu_*() behaviour more
consistent with other architectures.
$ ./compare.sh defconfig-build defconfig-build1 vmlinux.o
x86_pmu_cancel_txn 80 71 -9,+0
__text_poke 919 964 +45,+0
do_user_addr_fault 1082 1058 -24,+0
__do_page_fault 1194 1178 -16,+0
do_exit 2995 3027 -43,+75
process_one_work 1008 989 -67,+48
finish_task_switch 524 505 -19,+0
__schedule_bug 103 98 -59,+54
__schedule_bug 103 98 -59,+54
__sched_setscheduler 2015 2030 +15,+0
freeze_processes 203 230 +31,-4
rcu_gp_kthread_wake 106 99 -7,+0
rcu_core 1841 1834 -7,+0
call_timer_fn 298 286 -12,+0
can_stop_idle_tick 146 139 -31,+24
perf_pending_event 253 239 -14,+0
shmem_alloc_page 209 213 +4,+0
__alloc_pages_slowpath 3284 3269 -15,+0
umount_tree 671 694 +23,+0
advance_transaction 803 798 -5,+0
con_put_char 71 51 -20,+0
xhci_urb_enqueue 1302 1295 -7,+0
xhci_urb_enqueue 1302 1295 -7,+0
tcp_sacktag_write_queue 2130 2075 -55,+0
tcp_try_undo_loss 229 208 -21,+0
tcp_v4_inbound_md5_hash 438 411 -31,+4
tcp_v4_inbound_md5_hash 438 411 -31,+4
tcp_v6_inbound_md5_hash 469 411 -33,-25
tcp_v6_inbound_md5_hash 469 411 -33,-25
restricted_pointer 434 420 -14,+0
irq_exit 162 154 -8,+0
get_perf_callchain 638 624 -14,+0
rt_mutex_trylock 169 156 -13,+0
avc_has_extended_perms 1092 1089 -3,+0
avc_has_perm_noaudit 309 306 -3,+0
__perf_sw_event 138 122 -16,+0
perf_swevent_get_recursion_context 116 102 -14,+0
__local_bh_enable_ip 93 72 -21,+0
xfrm_input 4175 4161 -14,+0
avc_has_perm 446 443 -3,+0
vm_events_fold_cpu 57 56 -1,+0
vfree 68 61 -7,+0
freeze_processes 203 230 +31,-4
_local_bh_enable 44 30 -14,+0
ip_do_fragment 1982 1944 -38,+0
do_exit 2995 3027 -43,+75
__do_softirq 742 724 -18,+0
cpu_init 1510 1489 -21,+0
account_system_time 80 79 -1,+0
total 12985281 12984819 -742,+280
Reported-by: Nadav Amit <nadav.amit@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20181206112433.GB13675@hirez.programming.kicks-ass.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-12-06 11:24:33 +00:00
|
|
|
#define this_cpu_add_return_1(pcp, val) percpu_add_return_op(volatile, pcp, val)
|
|
|
|
|
#define this_cpu_add_return_2(pcp, val) percpu_add_return_op(volatile, pcp, val)
|
|
|
|
|
#define this_cpu_add_return_4(pcp, val) percpu_add_return_op(volatile, pcp, val)
|
|
|
|
|
#define this_cpu_cmpxchg_1(pcp, oval, nval) percpu_cmpxchg_op(volatile, pcp, oval, nval)
|
|
|
|
|
#define this_cpu_cmpxchg_2(pcp, oval, nval) percpu_cmpxchg_op(volatile, pcp, oval, nval)
|
|
|
|
|
#define this_cpu_cmpxchg_4(pcp, oval, nval) percpu_cmpxchg_op(volatile, pcp, oval, nval)
|
2010-12-14 16:28:44 +00:00
|
|
|
|
2011-02-28 10:02:24 +00:00
|
|
|
#ifdef CONFIG_X86_CMPXCHG64
|
2011-12-14 08:33:25 +00:00
|
|
|
#define percpu_cmpxchg8b_double(pcp1, pcp2, o1, o2, n1, n2) \
|
2011-02-28 10:02:24 +00:00
|
|
|
({ \
|
2011-12-14 08:33:25 +00:00
|
|
|
bool __ret; \
|
|
|
|
|
typeof(pcp1) __o1 = (o1), __n1 = (n1); \
|
|
|
|
|
typeof(pcp2) __o2 = (o2), __n2 = (n2); \
|
2018-06-05 16:39:09 +00:00
|
|
|
asm volatile("cmpxchg8b "__percpu_arg(1) \
|
|
|
|
|
CC_SET(z) \
|
|
|
|
|
: CC_OUT(z) (__ret), "+m" (pcp1), "+m" (pcp2), "+a" (__o1), "+d" (__o2) \
|
|
|
|
|
: "b" (__n1), "c" (__n2)); \
|
2011-02-28 10:02:24 +00:00
|
|
|
__ret; \
|
|
|
|
|
})
|
|
|
|
|
|
2014-04-07 22:39:34 +00:00
|
|
|
#define raw_cpu_cmpxchg_double_4 percpu_cmpxchg8b_double
|
2011-12-14 08:33:25 +00:00
|
|
|
#define this_cpu_cmpxchg_double_4 percpu_cmpxchg8b_double
|
2011-02-28 10:02:24 +00:00
|
|
|
#endif /* CONFIG_X86_CMPXCHG64 */
|
|
|
|
|
|
2009-10-03 10:48:22 +00:00
|
|
|
/*
|
|
|
|
|
* Per cpu atomic 64 bit operations are only available under 64 bit.
|
|
|
|
|
* 32 bit must fall back to generic operations.
|
|
|
|
|
*/
|
|
|
|
|
#ifdef CONFIG_X86_64
|
x86/percpu: Differentiate this_cpu_{}() and __this_cpu_{}()
Nadav Amit reported that commit:
b59167ac7baf ("x86/percpu: Fix this_cpu_read()")
added a bunch of constraints to all sorts of code; and while some of
that was correct and desired, some of that seems superfluous.
The thing is, the this_cpu_*() operations are defined IRQ-safe, this
means the values are subject to change from IRQs, and thus must be
reloaded.
Also, the generic form:
local_irq_save()
__this_cpu_read()
local_irq_restore()
would not allow the re-use of previous values; if by nothing else,
then the barrier()s implied by local_irq_*().
Which raises the point that percpu_from_op() and the others also need
that volatile.
OTOH __this_cpu_*() operations are not IRQ-safe and assume external
preempt/IRQ disabling and could thus be allowed more room for
optimization.
This makes the this_cpu_*() vs __this_cpu_*() behaviour more
consistent with other architectures.
$ ./compare.sh defconfig-build defconfig-build1 vmlinux.o
x86_pmu_cancel_txn 80 71 -9,+0
__text_poke 919 964 +45,+0
do_user_addr_fault 1082 1058 -24,+0
__do_page_fault 1194 1178 -16,+0
do_exit 2995 3027 -43,+75
process_one_work 1008 989 -67,+48
finish_task_switch 524 505 -19,+0
__schedule_bug 103 98 -59,+54
__schedule_bug 103 98 -59,+54
__sched_setscheduler 2015 2030 +15,+0
freeze_processes 203 230 +31,-4
rcu_gp_kthread_wake 106 99 -7,+0
rcu_core 1841 1834 -7,+0
call_timer_fn 298 286 -12,+0
can_stop_idle_tick 146 139 -31,+24
perf_pending_event 253 239 -14,+0
shmem_alloc_page 209 213 +4,+0
__alloc_pages_slowpath 3284 3269 -15,+0
umount_tree 671 694 +23,+0
advance_transaction 803 798 -5,+0
con_put_char 71 51 -20,+0
xhci_urb_enqueue 1302 1295 -7,+0
xhci_urb_enqueue 1302 1295 -7,+0
tcp_sacktag_write_queue 2130 2075 -55,+0
tcp_try_undo_loss 229 208 -21,+0
tcp_v4_inbound_md5_hash 438 411 -31,+4
tcp_v4_inbound_md5_hash 438 411 -31,+4
tcp_v6_inbound_md5_hash 469 411 -33,-25
tcp_v6_inbound_md5_hash 469 411 -33,-25
restricted_pointer 434 420 -14,+0
irq_exit 162 154 -8,+0
get_perf_callchain 638 624 -14,+0
rt_mutex_trylock 169 156 -13,+0
avc_has_extended_perms 1092 1089 -3,+0
avc_has_perm_noaudit 309 306 -3,+0
__perf_sw_event 138 122 -16,+0
perf_swevent_get_recursion_context 116 102 -14,+0
__local_bh_enable_ip 93 72 -21,+0
xfrm_input 4175 4161 -14,+0
avc_has_perm 446 443 -3,+0
vm_events_fold_cpu 57 56 -1,+0
vfree 68 61 -7,+0
freeze_processes 203 230 +31,-4
_local_bh_enable 44 30 -14,+0
ip_do_fragment 1982 1944 -38,+0
do_exit 2995 3027 -43,+75
__do_softirq 742 724 -18,+0
cpu_init 1510 1489 -21,+0
account_system_time 80 79 -1,+0
total 12985281 12984819 -742,+280
Reported-by: Nadav Amit <nadav.amit@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20181206112433.GB13675@hirez.programming.kicks-ass.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-12-06 11:24:33 +00:00
|
|
|
#define raw_cpu_read_8(pcp) percpu_from_op(, "mov", pcp)
|
|
|
|
|
#define raw_cpu_write_8(pcp, val) percpu_to_op(, "mov", (pcp), val)
|
|
|
|
|
#define raw_cpu_add_8(pcp, val) percpu_add_op(, (pcp), val)
|
|
|
|
|
#define raw_cpu_and_8(pcp, val) percpu_to_op(, "and", (pcp), val)
|
|
|
|
|
#define raw_cpu_or_8(pcp, val) percpu_to_op(, "or", (pcp), val)
|
|
|
|
|
#define raw_cpu_add_return_8(pcp, val) percpu_add_return_op(, pcp, val)
|
|
|
|
|
#define raw_cpu_xchg_8(pcp, nval) percpu_xchg_op(, pcp, nval)
|
|
|
|
|
#define raw_cpu_cmpxchg_8(pcp, oval, nval) percpu_cmpxchg_op(, pcp, oval, nval)
|
2014-04-07 22:39:34 +00:00
|
|
|
|
x86/percpu: Differentiate this_cpu_{}() and __this_cpu_{}()
Nadav Amit reported that commit:
b59167ac7baf ("x86/percpu: Fix this_cpu_read()")
added a bunch of constraints to all sorts of code; and while some of
that was correct and desired, some of that seems superfluous.
The thing is, the this_cpu_*() operations are defined IRQ-safe, this
means the values are subject to change from IRQs, and thus must be
reloaded.
Also, the generic form:
local_irq_save()
__this_cpu_read()
local_irq_restore()
would not allow the re-use of previous values; if by nothing else,
then the barrier()s implied by local_irq_*().
Which raises the point that percpu_from_op() and the others also need
that volatile.
OTOH __this_cpu_*() operations are not IRQ-safe and assume external
preempt/IRQ disabling and could thus be allowed more room for
optimization.
This makes the this_cpu_*() vs __this_cpu_*() behaviour more
consistent with other architectures.
$ ./compare.sh defconfig-build defconfig-build1 vmlinux.o
x86_pmu_cancel_txn 80 71 -9,+0
__text_poke 919 964 +45,+0
do_user_addr_fault 1082 1058 -24,+0
__do_page_fault 1194 1178 -16,+0
do_exit 2995 3027 -43,+75
process_one_work 1008 989 -67,+48
finish_task_switch 524 505 -19,+0
__schedule_bug 103 98 -59,+54
__schedule_bug 103 98 -59,+54
__sched_setscheduler 2015 2030 +15,+0
freeze_processes 203 230 +31,-4
rcu_gp_kthread_wake 106 99 -7,+0
rcu_core 1841 1834 -7,+0
call_timer_fn 298 286 -12,+0
can_stop_idle_tick 146 139 -31,+24
perf_pending_event 253 239 -14,+0
shmem_alloc_page 209 213 +4,+0
__alloc_pages_slowpath 3284 3269 -15,+0
umount_tree 671 694 +23,+0
advance_transaction 803 798 -5,+0
con_put_char 71 51 -20,+0
xhci_urb_enqueue 1302 1295 -7,+0
xhci_urb_enqueue 1302 1295 -7,+0
tcp_sacktag_write_queue 2130 2075 -55,+0
tcp_try_undo_loss 229 208 -21,+0
tcp_v4_inbound_md5_hash 438 411 -31,+4
tcp_v4_inbound_md5_hash 438 411 -31,+4
tcp_v6_inbound_md5_hash 469 411 -33,-25
tcp_v6_inbound_md5_hash 469 411 -33,-25
restricted_pointer 434 420 -14,+0
irq_exit 162 154 -8,+0
get_perf_callchain 638 624 -14,+0
rt_mutex_trylock 169 156 -13,+0
avc_has_extended_perms 1092 1089 -3,+0
avc_has_perm_noaudit 309 306 -3,+0
__perf_sw_event 138 122 -16,+0
perf_swevent_get_recursion_context 116 102 -14,+0
__local_bh_enable_ip 93 72 -21,+0
xfrm_input 4175 4161 -14,+0
avc_has_perm 446 443 -3,+0
vm_events_fold_cpu 57 56 -1,+0
vfree 68 61 -7,+0
freeze_processes 203 230 +31,-4
_local_bh_enable 44 30 -14,+0
ip_do_fragment 1982 1944 -38,+0
do_exit 2995 3027 -43,+75
__do_softirq 742 724 -18,+0
cpu_init 1510 1489 -21,+0
account_system_time 80 79 -1,+0
total 12985281 12984819 -742,+280
Reported-by: Nadav Amit <nadav.amit@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20181206112433.GB13675@hirez.programming.kicks-ass.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-12-06 11:24:33 +00:00
|
|
|
#define this_cpu_read_8(pcp) percpu_from_op(volatile, "mov", pcp)
|
|
|
|
|
#define this_cpu_write_8(pcp, val) percpu_to_op(volatile, "mov", (pcp), val)
|
|
|
|
|
#define this_cpu_add_8(pcp, val) percpu_add_op(volatile, (pcp), val)
|
|
|
|
|
#define this_cpu_and_8(pcp, val) percpu_to_op(volatile, "and", (pcp), val)
|
|
|
|
|
#define this_cpu_or_8(pcp, val) percpu_to_op(volatile, "or", (pcp), val)
|
|
|
|
|
#define this_cpu_add_return_8(pcp, val) percpu_add_return_op(volatile, pcp, val)
|
|
|
|
|
#define this_cpu_xchg_8(pcp, nval) percpu_xchg_op(volatile, pcp, nval)
|
|
|
|
|
#define this_cpu_cmpxchg_8(pcp, oval, nval) percpu_cmpxchg_op(volatile, pcp, oval, nval)
|
2009-10-03 10:48:22 +00:00
|
|
|
|
2011-02-28 10:02:24 +00:00
|
|
|
/*
|
|
|
|
|
* Pretty complex macro to generate cmpxchg16 instruction. The instruction
|
|
|
|
|
* is not supported on early AMD64 processors so we must be able to emulate
|
|
|
|
|
* it in software. The address used in the cmpxchg16 instruction must be
|
|
|
|
|
* aligned to a 16 byte boundary.
|
|
|
|
|
*/
|
2011-12-14 08:33:25 +00:00
|
|
|
#define percpu_cmpxchg16b_double(pcp1, pcp2, o1, o2, n1, n2) \
|
2011-02-28 10:02:24 +00:00
|
|
|
({ \
|
2011-12-14 08:33:25 +00:00
|
|
|
bool __ret; \
|
|
|
|
|
typeof(pcp1) __o1 = (o1), __n1 = (n1); \
|
|
|
|
|
typeof(pcp2) __o2 = (o2), __n2 = (n2); \
|
|
|
|
|
alternative_io("leaq %P1,%%rsi\n\tcall this_cpu_cmpxchg16b_emu\n\t", \
|
|
|
|
|
"cmpxchg16b " __percpu_arg(1) "\n\tsetz %0\n\t", \
|
2011-02-28 10:02:24 +00:00
|
|
|
X86_FEATURE_CX16, \
|
2011-12-14 08:33:25 +00:00
|
|
|
ASM_OUTPUT2("=a" (__ret), "+m" (pcp1), \
|
|
|
|
|
"+m" (pcp2), "+d" (__o2)), \
|
|
|
|
|
"b" (__n1), "c" (__n2), "a" (__o1) : "rsi"); \
|
2011-02-28 10:02:24 +00:00
|
|
|
__ret; \
|
|
|
|
|
})
|
|
|
|
|
|
2014-04-07 22:39:34 +00:00
|
|
|
#define raw_cpu_cmpxchg_double_8 percpu_cmpxchg16b_double
|
2011-12-14 08:33:25 +00:00
|
|
|
#define this_cpu_cmpxchg_double_8 percpu_cmpxchg16b_double
|
2011-02-28 10:02:24 +00:00
|
|
|
|
2009-10-03 10:48:22 +00:00
|
|
|
#endif
|
|
|
|
|
|
2016-06-08 19:38:38 +00:00
|
|
|
static __always_inline bool x86_this_cpu_constant_test_bit(unsigned int nr,
|
2011-03-12 11:50:10 +00:00
|
|
|
const unsigned long __percpu *addr)
|
|
|
|
|
{
|
2016-09-22 14:03:57 +00:00
|
|
|
unsigned long __percpu *a =
|
|
|
|
|
(unsigned long __percpu *)addr + nr / BITS_PER_LONG;
|
2011-03-12 11:50:10 +00:00
|
|
|
|
2012-05-14 21:15:32 +00:00
|
|
|
#ifdef CONFIG_X86_64
|
2014-04-07 22:39:34 +00:00
|
|
|
return ((1UL << (nr % BITS_PER_LONG)) & raw_cpu_read_8(*a)) != 0;
|
2012-05-14 21:15:32 +00:00
|
|
|
#else
|
2014-04-07 22:39:34 +00:00
|
|
|
return ((1UL << (nr % BITS_PER_LONG)) & raw_cpu_read_4(*a)) != 0;
|
2012-05-14 21:15:32 +00:00
|
|
|
#endif
|
2011-03-12 11:50:10 +00:00
|
|
|
}
|
|
|
|
|
|
2016-06-08 19:38:38 +00:00
|
|
|
static inline bool x86_this_cpu_variable_test_bit(int nr,
|
2011-03-12 11:50:10 +00:00
|
|
|
const unsigned long __percpu *addr)
|
|
|
|
|
{
|
2016-06-08 19:38:38 +00:00
|
|
|
bool oldbit;
|
2011-03-12 11:50:10 +00:00
|
|
|
|
2018-02-26 11:11:51 +00:00
|
|
|
asm volatile("btl "__percpu_arg(2)",%1"
|
2016-06-08 19:38:43 +00:00
|
|
|
CC_SET(c)
|
|
|
|
|
: CC_OUT(c) (oldbit)
|
2016-09-22 14:03:57 +00:00
|
|
|
: "m" (*(unsigned long __percpu *)addr), "Ir" (nr));
|
2011-03-12 11:50:10 +00:00
|
|
|
|
|
|
|
|
return oldbit;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
#define x86_this_cpu_test_bit(nr, addr) \
|
|
|
|
|
(__builtin_constant_p((nr)) \
|
|
|
|
|
? x86_this_cpu_constant_test_bit((nr), (addr)) \
|
|
|
|
|
: x86_this_cpu_variable_test_bit((nr), (addr)))
|
|
|
|
|
|
|
|
|
|
|
percpu: add optimized generic percpu accessors
It is an optimization and a cleanup, and adds the following new
generic percpu methods:
percpu_read()
percpu_write()
percpu_add()
percpu_sub()
percpu_and()
percpu_or()
percpu_xor()
and implements support for them on x86. (other architectures will fall
back to a default implementation)
The advantage is that for example to read a local percpu variable,
instead of this sequence:
return __get_cpu_var(var);
ffffffff8102ca2b: 48 8b 14 fd 80 09 74 mov -0x7e8bf680(,%rdi,8),%rdx
ffffffff8102ca32: 81
ffffffff8102ca33: 48 c7 c0 d8 59 00 00 mov $0x59d8,%rax
ffffffff8102ca3a: 48 8b 04 10 mov (%rax,%rdx,1),%rax
We can get a single instruction by using the optimized variants:
return percpu_read(var);
ffffffff8102ca3f: 65 48 8b 05 91 8f fd mov %gs:0x7efd8f91(%rip),%rax
I also cleaned up the x86-specific APIs and made the x86 code use
these new generic percpu primitives.
tj: * fixed generic percpu_sub() definition as Roel Kluin pointed out
* added percpu_and() for completeness's sake
* made generic percpu ops atomic against preemption
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Tejun Heo <tj@kernel.org>
2009-01-15 13:15:53 +00:00
|
|
|
#include <asm-generic/percpu.h>
|
|
|
|
|
|
|
|
|
|
/* We can use this directly for local CPU (faster). */
|
2014-11-04 08:26:42 +00:00
|
|
|
DECLARE_PER_CPU_READ_MOSTLY(unsigned long, this_cpu_off);
|
percpu: add optimized generic percpu accessors
It is an optimization and a cleanup, and adds the following new
generic percpu methods:
percpu_read()
percpu_write()
percpu_add()
percpu_sub()
percpu_and()
percpu_or()
percpu_xor()
and implements support for them on x86. (other architectures will fall
back to a default implementation)
The advantage is that for example to read a local percpu variable,
instead of this sequence:
return __get_cpu_var(var);
ffffffff8102ca2b: 48 8b 14 fd 80 09 74 mov -0x7e8bf680(,%rdi,8),%rdx
ffffffff8102ca32: 81
ffffffff8102ca33: 48 c7 c0 d8 59 00 00 mov $0x59d8,%rax
ffffffff8102ca3a: 48 8b 04 10 mov (%rax,%rdx,1),%rax
We can get a single instruction by using the optimized variants:
return percpu_read(var);
ffffffff8102ca3f: 65 48 8b 05 91 8f fd mov %gs:0x7efd8f91(%rip),%rax
I also cleaned up the x86-specific APIs and made the x86 code use
these new generic percpu primitives.
tj: * fixed generic percpu_sub() definition as Roel Kluin pointed out
* added percpu_and() for completeness's sake
* made generic percpu ops atomic against preemption
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Tejun Heo <tj@kernel.org>
2009-01-15 13:15:53 +00:00
|
|
|
|
2008-01-30 12:32:53 +00:00
|
|
|
#endif /* !__ASSEMBLY__ */
|
x86: cleanup early per cpu variables/accesses v4
* Introduce a new PER_CPU macro called "EARLY_PER_CPU". This is
used by some per_cpu variables that are initialized and accessed
before there are per_cpu areas allocated.
["Early" in respect to per_cpu variables is "earlier than the per_cpu
areas have been setup".]
This patchset adds these new macros:
DEFINE_EARLY_PER_CPU(_type, _name, _initvalue)
EXPORT_EARLY_PER_CPU_SYMBOL(_name)
DECLARE_EARLY_PER_CPU(_type, _name)
early_per_cpu_ptr(_name)
early_per_cpu_map(_name, _idx)
early_per_cpu(_name, _cpu)
The DEFINE macro defines the per_cpu variable as well as the early
map and pointer. It also initializes the per_cpu variable and map
elements to "_initvalue". The early_* macros provide access to
the initial map (usually setup during system init) and the early
pointer. This pointer is initialized to point to the early map
but is then NULL'ed when the actual per_cpu areas are setup. After
that the per_cpu variable is the correct access to the variable.
The early_per_cpu() macro is not very efficient but does show how to
access the variable if you have a function that can be called both
"early" and "late". It tests the early ptr to be NULL, and if not
then it's still valid. Otherwise, the per_cpu variable is used
instead:
#define early_per_cpu(_name, _cpu) \
(early_per_cpu_ptr(_name) ? \
early_per_cpu_ptr(_name)[_cpu] : \
per_cpu(_name, _cpu))
A better method is to actually check the pointer manually. In the
case below, numa_set_node can be called both "early" and "late":
void __cpuinit numa_set_node(int cpu, int node)
{
int *cpu_to_node_map = early_per_cpu_ptr(x86_cpu_to_node_map);
if (cpu_to_node_map)
cpu_to_node_map[cpu] = node;
else
per_cpu(x86_cpu_to_node_map, cpu) = node;
}
* Add a flag "arch_provides_topology_pointers" that indicates pointers
to topology cpumask_t maps are available. Otherwise, use the function
returning the cpumask_t value. This is useful if cpumask_t set size
is very large to avoid copying data on to/off of the stack.
* The coverage of CONFIG_DEBUG_PER_CPU_MAPS has been increased while
the non-debug case has been optimized a bit.
* Remove an unreferenced compiler warning in drivers/base/topology.c
* Clean up #ifdef in setup.c
For inclusion into sched-devel/latest tree.
Based on:
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git
+ sched-devel/latest .../mingo/linux-2.6-sched-devel.git
Signed-off-by: Mike Travis <travis@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-12 19:21:12 +00:00
|
|
|
|
|
|
|
|
#ifdef CONFIG_SMP
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* Define the "EARLY_PER_CPU" macros. These are used for some per_cpu
|
|
|
|
|
* variables that are initialized and accessed before there are per_cpu
|
|
|
|
|
* areas allocated.
|
|
|
|
|
*/
|
|
|
|
|
|
|
|
|
|
#define DEFINE_EARLY_PER_CPU(_type, _name, _initvalue) \
|
|
|
|
|
DEFINE_PER_CPU(_type, _name) = _initvalue; \
|
|
|
|
|
__typeof__(_type) _name##_early_map[NR_CPUS] __initdata = \
|
|
|
|
|
{ [0 ... NR_CPUS-1] = _initvalue }; \
|
x86, percpu: silence section mismatch warnings related to EARLY_PER_CPU variables
Quoting Mike Travis in "x86: cleanup early per cpu variables/accesses v4"
(23ca4bba3e20c6c3cb11c1bb0ab4770b724d39ac):
The DEFINE macro defines the per_cpu variable as well as the early
map and pointer. It also initializes the per_cpu variable and map
elements to "_initvalue". The early_* macros provide access to
the initial map (usually setup during system init) and the early
pointer. This pointer is initialized to point to the early map
but is then NULL'ed when the actual per_cpu areas are setup. After
that the per_cpu variable is the correct access to the variable.
As these variables are NULL'ed before __init sections are dropped
(in setup_per_cpu_maps), they can be safely annotated as __ref.
This change silences following section mismatch warnings:
WARNING: vmlinux.o(.data+0x46c0): Section mismatch in reference from the variable x86_cpu_to_apicid_early_ptr to the variable .init.data:x86_cpu_to_apicid_early_map
The variable x86_cpu_to_apicid_early_ptr references
the variable __initdata x86_cpu_to_apicid_early_map
If the reference is valid then annotate the
variable with __init* (see linux/init.h) or name the variable:
*driver, *_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console,
WARNING: vmlinux.o(.data+0x46c8): Section mismatch in reference from the variable x86_bios_cpu_apicid_early_ptr to the variable .init.data:x86_bios_cpu_apicid_early_map
The variable x86_bios_cpu_apicid_early_ptr references
the variable __initdata x86_bios_cpu_apicid_early_map
If the reference is valid then annotate the
variable with __init* (see linux/init.h) or name the variable:
*driver, *_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console,
WARNING: vmlinux.o(.data+0x46d0): Section mismatch in reference from the variable x86_cpu_to_node_map_early_ptr to the variable .init.data:x86_cpu_to_node_map_early_map
The variable x86_cpu_to_node_map_early_ptr references
the variable __initdata x86_cpu_to_node_map_early_map
If the reference is valid then annotate the
variable with __init* (see linux/init.h) or name the variable:
*driver, *_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console,
Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Cc: Mike Travis <travis@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-17 15:50:50 +00:00
|
|
|
__typeof__(_type) *_name##_early_ptr __refdata = _name##_early_map
|
x86: cleanup early per cpu variables/accesses v4
* Introduce a new PER_CPU macro called "EARLY_PER_CPU". This is
used by some per_cpu variables that are initialized and accessed
before there are per_cpu areas allocated.
["Early" in respect to per_cpu variables is "earlier than the per_cpu
areas have been setup".]
This patchset adds these new macros:
DEFINE_EARLY_PER_CPU(_type, _name, _initvalue)
EXPORT_EARLY_PER_CPU_SYMBOL(_name)
DECLARE_EARLY_PER_CPU(_type, _name)
early_per_cpu_ptr(_name)
early_per_cpu_map(_name, _idx)
early_per_cpu(_name, _cpu)
The DEFINE macro defines the per_cpu variable as well as the early
map and pointer. It also initializes the per_cpu variable and map
elements to "_initvalue". The early_* macros provide access to
the initial map (usually setup during system init) and the early
pointer. This pointer is initialized to point to the early map
but is then NULL'ed when the actual per_cpu areas are setup. After
that the per_cpu variable is the correct access to the variable.
The early_per_cpu() macro is not very efficient but does show how to
access the variable if you have a function that can be called both
"early" and "late". It tests the early ptr to be NULL, and if not
then it's still valid. Otherwise, the per_cpu variable is used
instead:
#define early_per_cpu(_name, _cpu) \
(early_per_cpu_ptr(_name) ? \
early_per_cpu_ptr(_name)[_cpu] : \
per_cpu(_name, _cpu))
A better method is to actually check the pointer manually. In the
case below, numa_set_node can be called both "early" and "late":
void __cpuinit numa_set_node(int cpu, int node)
{
int *cpu_to_node_map = early_per_cpu_ptr(x86_cpu_to_node_map);
if (cpu_to_node_map)
cpu_to_node_map[cpu] = node;
else
per_cpu(x86_cpu_to_node_map, cpu) = node;
}
* Add a flag "arch_provides_topology_pointers" that indicates pointers
to topology cpumask_t maps are available. Otherwise, use the function
returning the cpumask_t value. This is useful if cpumask_t set size
is very large to avoid copying data on to/off of the stack.
* The coverage of CONFIG_DEBUG_PER_CPU_MAPS has been increased while
the non-debug case has been optimized a bit.
* Remove an unreferenced compiler warning in drivers/base/topology.c
* Clean up #ifdef in setup.c
For inclusion into sched-devel/latest tree.
Based on:
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git
+ sched-devel/latest .../mingo/linux-2.6-sched-devel.git
Signed-off-by: Mike Travis <travis@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-12 19:21:12 +00:00
|
|
|
|
2012-06-11 09:56:45 +00:00
|
|
|
#define DEFINE_EARLY_PER_CPU_READ_MOSTLY(_type, _name, _initvalue) \
|
|
|
|
|
DEFINE_PER_CPU_READ_MOSTLY(_type, _name) = _initvalue; \
|
|
|
|
|
__typeof__(_type) _name##_early_map[NR_CPUS] __initdata = \
|
|
|
|
|
{ [0 ... NR_CPUS-1] = _initvalue }; \
|
|
|
|
|
__typeof__(_type) *_name##_early_ptr __refdata = _name##_early_map
|
|
|
|
|
|
x86: cleanup early per cpu variables/accesses v4
* Introduce a new PER_CPU macro called "EARLY_PER_CPU". This is
used by some per_cpu variables that are initialized and accessed
before there are per_cpu areas allocated.
["Early" in respect to per_cpu variables is "earlier than the per_cpu
areas have been setup".]
This patchset adds these new macros:
DEFINE_EARLY_PER_CPU(_type, _name, _initvalue)
EXPORT_EARLY_PER_CPU_SYMBOL(_name)
DECLARE_EARLY_PER_CPU(_type, _name)
early_per_cpu_ptr(_name)
early_per_cpu_map(_name, _idx)
early_per_cpu(_name, _cpu)
The DEFINE macro defines the per_cpu variable as well as the early
map and pointer. It also initializes the per_cpu variable and map
elements to "_initvalue". The early_* macros provide access to
the initial map (usually setup during system init) and the early
pointer. This pointer is initialized to point to the early map
but is then NULL'ed when the actual per_cpu areas are setup. After
that the per_cpu variable is the correct access to the variable.
The early_per_cpu() macro is not very efficient but does show how to
access the variable if you have a function that can be called both
"early" and "late". It tests the early ptr to be NULL, and if not
then it's still valid. Otherwise, the per_cpu variable is used
instead:
#define early_per_cpu(_name, _cpu) \
(early_per_cpu_ptr(_name) ? \
early_per_cpu_ptr(_name)[_cpu] : \
per_cpu(_name, _cpu))
A better method is to actually check the pointer manually. In the
case below, numa_set_node can be called both "early" and "late":
void __cpuinit numa_set_node(int cpu, int node)
{
int *cpu_to_node_map = early_per_cpu_ptr(x86_cpu_to_node_map);
if (cpu_to_node_map)
cpu_to_node_map[cpu] = node;
else
per_cpu(x86_cpu_to_node_map, cpu) = node;
}
* Add a flag "arch_provides_topology_pointers" that indicates pointers
to topology cpumask_t maps are available. Otherwise, use the function
returning the cpumask_t value. This is useful if cpumask_t set size
is very large to avoid copying data on to/off of the stack.
* The coverage of CONFIG_DEBUG_PER_CPU_MAPS has been increased while
the non-debug case has been optimized a bit.
* Remove an unreferenced compiler warning in drivers/base/topology.c
* Clean up #ifdef in setup.c
For inclusion into sched-devel/latest tree.
Based on:
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git
+ sched-devel/latest .../mingo/linux-2.6-sched-devel.git
Signed-off-by: Mike Travis <travis@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-12 19:21:12 +00:00
|
|
|
#define EXPORT_EARLY_PER_CPU_SYMBOL(_name) \
|
|
|
|
|
EXPORT_PER_CPU_SYMBOL(_name)
|
|
|
|
|
|
|
|
|
|
#define DECLARE_EARLY_PER_CPU(_type, _name) \
|
|
|
|
|
DECLARE_PER_CPU(_type, _name); \
|
|
|
|
|
extern __typeof__(_type) *_name##_early_ptr; \
|
|
|
|
|
extern __typeof__(_type) _name##_early_map[]
|
|
|
|
|
|
2012-06-11 09:56:45 +00:00
|
|
|
#define DECLARE_EARLY_PER_CPU_READ_MOSTLY(_type, _name) \
|
|
|
|
|
DECLARE_PER_CPU_READ_MOSTLY(_type, _name); \
|
|
|
|
|
extern __typeof__(_type) *_name##_early_ptr; \
|
|
|
|
|
extern __typeof__(_type) _name##_early_map[]
|
|
|
|
|
|
x86: cleanup early per cpu variables/accesses v4
* Introduce a new PER_CPU macro called "EARLY_PER_CPU". This is
used by some per_cpu variables that are initialized and accessed
before there are per_cpu areas allocated.
["Early" in respect to per_cpu variables is "earlier than the per_cpu
areas have been setup".]
This patchset adds these new macros:
DEFINE_EARLY_PER_CPU(_type, _name, _initvalue)
EXPORT_EARLY_PER_CPU_SYMBOL(_name)
DECLARE_EARLY_PER_CPU(_type, _name)
early_per_cpu_ptr(_name)
early_per_cpu_map(_name, _idx)
early_per_cpu(_name, _cpu)
The DEFINE macro defines the per_cpu variable as well as the early
map and pointer. It also initializes the per_cpu variable and map
elements to "_initvalue". The early_* macros provide access to
the initial map (usually setup during system init) and the early
pointer. This pointer is initialized to point to the early map
but is then NULL'ed when the actual per_cpu areas are setup. After
that the per_cpu variable is the correct access to the variable.
The early_per_cpu() macro is not very efficient but does show how to
access the variable if you have a function that can be called both
"early" and "late". It tests the early ptr to be NULL, and if not
then it's still valid. Otherwise, the per_cpu variable is used
instead:
#define early_per_cpu(_name, _cpu) \
(early_per_cpu_ptr(_name) ? \
early_per_cpu_ptr(_name)[_cpu] : \
per_cpu(_name, _cpu))
A better method is to actually check the pointer manually. In the
case below, numa_set_node can be called both "early" and "late":
void __cpuinit numa_set_node(int cpu, int node)
{
int *cpu_to_node_map = early_per_cpu_ptr(x86_cpu_to_node_map);
if (cpu_to_node_map)
cpu_to_node_map[cpu] = node;
else
per_cpu(x86_cpu_to_node_map, cpu) = node;
}
* Add a flag "arch_provides_topology_pointers" that indicates pointers
to topology cpumask_t maps are available. Otherwise, use the function
returning the cpumask_t value. This is useful if cpumask_t set size
is very large to avoid copying data on to/off of the stack.
* The coverage of CONFIG_DEBUG_PER_CPU_MAPS has been increased while
the non-debug case has been optimized a bit.
* Remove an unreferenced compiler warning in drivers/base/topology.c
* Clean up #ifdef in setup.c
For inclusion into sched-devel/latest tree.
Based on:
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git
+ sched-devel/latest .../mingo/linux-2.6-sched-devel.git
Signed-off-by: Mike Travis <travis@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-12 19:21:12 +00:00
|
|
|
#define early_per_cpu_ptr(_name) (_name##_early_ptr)
|
|
|
|
|
#define early_per_cpu_map(_name, _idx) (_name##_early_map[_idx])
|
|
|
|
|
#define early_per_cpu(_name, _cpu) \
|
2009-01-13 11:41:34 +00:00
|
|
|
*(early_per_cpu_ptr(_name) ? \
|
|
|
|
|
&early_per_cpu_ptr(_name)[_cpu] : \
|
|
|
|
|
&per_cpu(_name, _cpu))
|
x86: cleanup early per cpu variables/accesses v4
* Introduce a new PER_CPU macro called "EARLY_PER_CPU". This is
used by some per_cpu variables that are initialized and accessed
before there are per_cpu areas allocated.
["Early" in respect to per_cpu variables is "earlier than the per_cpu
areas have been setup".]
This patchset adds these new macros:
DEFINE_EARLY_PER_CPU(_type, _name, _initvalue)
EXPORT_EARLY_PER_CPU_SYMBOL(_name)
DECLARE_EARLY_PER_CPU(_type, _name)
early_per_cpu_ptr(_name)
early_per_cpu_map(_name, _idx)
early_per_cpu(_name, _cpu)
The DEFINE macro defines the per_cpu variable as well as the early
map and pointer. It also initializes the per_cpu variable and map
elements to "_initvalue". The early_* macros provide access to
the initial map (usually setup during system init) and the early
pointer. This pointer is initialized to point to the early map
but is then NULL'ed when the actual per_cpu areas are setup. After
that the per_cpu variable is the correct access to the variable.
The early_per_cpu() macro is not very efficient but does show how to
access the variable if you have a function that can be called both
"early" and "late". It tests the early ptr to be NULL, and if not
then it's still valid. Otherwise, the per_cpu variable is used
instead:
#define early_per_cpu(_name, _cpu) \
(early_per_cpu_ptr(_name) ? \
early_per_cpu_ptr(_name)[_cpu] : \
per_cpu(_name, _cpu))
A better method is to actually check the pointer manually. In the
case below, numa_set_node can be called both "early" and "late":
void __cpuinit numa_set_node(int cpu, int node)
{
int *cpu_to_node_map = early_per_cpu_ptr(x86_cpu_to_node_map);
if (cpu_to_node_map)
cpu_to_node_map[cpu] = node;
else
per_cpu(x86_cpu_to_node_map, cpu) = node;
}
* Add a flag "arch_provides_topology_pointers" that indicates pointers
to topology cpumask_t maps are available. Otherwise, use the function
returning the cpumask_t value. This is useful if cpumask_t set size
is very large to avoid copying data on to/off of the stack.
* The coverage of CONFIG_DEBUG_PER_CPU_MAPS has been increased while
the non-debug case has been optimized a bit.
* Remove an unreferenced compiler warning in drivers/base/topology.c
* Clean up #ifdef in setup.c
For inclusion into sched-devel/latest tree.
Based on:
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git
+ sched-devel/latest .../mingo/linux-2.6-sched-devel.git
Signed-off-by: Mike Travis <travis@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-12 19:21:12 +00:00
|
|
|
|
|
|
|
|
#else /* !CONFIG_SMP */
|
|
|
|
|
#define DEFINE_EARLY_PER_CPU(_type, _name, _initvalue) \
|
|
|
|
|
DEFINE_PER_CPU(_type, _name) = _initvalue
|
|
|
|
|
|
2012-06-11 09:56:45 +00:00
|
|
|
#define DEFINE_EARLY_PER_CPU_READ_MOSTLY(_type, _name, _initvalue) \
|
|
|
|
|
DEFINE_PER_CPU_READ_MOSTLY(_type, _name) = _initvalue
|
|
|
|
|
|
x86: cleanup early per cpu variables/accesses v4
* Introduce a new PER_CPU macro called "EARLY_PER_CPU". This is
used by some per_cpu variables that are initialized and accessed
before there are per_cpu areas allocated.
["Early" in respect to per_cpu variables is "earlier than the per_cpu
areas have been setup".]
This patchset adds these new macros:
DEFINE_EARLY_PER_CPU(_type, _name, _initvalue)
EXPORT_EARLY_PER_CPU_SYMBOL(_name)
DECLARE_EARLY_PER_CPU(_type, _name)
early_per_cpu_ptr(_name)
early_per_cpu_map(_name, _idx)
early_per_cpu(_name, _cpu)
The DEFINE macro defines the per_cpu variable as well as the early
map and pointer. It also initializes the per_cpu variable and map
elements to "_initvalue". The early_* macros provide access to
the initial map (usually setup during system init) and the early
pointer. This pointer is initialized to point to the early map
but is then NULL'ed when the actual per_cpu areas are setup. After
that the per_cpu variable is the correct access to the variable.
The early_per_cpu() macro is not very efficient but does show how to
access the variable if you have a function that can be called both
"early" and "late". It tests the early ptr to be NULL, and if not
then it's still valid. Otherwise, the per_cpu variable is used
instead:
#define early_per_cpu(_name, _cpu) \
(early_per_cpu_ptr(_name) ? \
early_per_cpu_ptr(_name)[_cpu] : \
per_cpu(_name, _cpu))
A better method is to actually check the pointer manually. In the
case below, numa_set_node can be called both "early" and "late":
void __cpuinit numa_set_node(int cpu, int node)
{
int *cpu_to_node_map = early_per_cpu_ptr(x86_cpu_to_node_map);
if (cpu_to_node_map)
cpu_to_node_map[cpu] = node;
else
per_cpu(x86_cpu_to_node_map, cpu) = node;
}
* Add a flag "arch_provides_topology_pointers" that indicates pointers
to topology cpumask_t maps are available. Otherwise, use the function
returning the cpumask_t value. This is useful if cpumask_t set size
is very large to avoid copying data on to/off of the stack.
* The coverage of CONFIG_DEBUG_PER_CPU_MAPS has been increased while
the non-debug case has been optimized a bit.
* Remove an unreferenced compiler warning in drivers/base/topology.c
* Clean up #ifdef in setup.c
For inclusion into sched-devel/latest tree.
Based on:
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git
+ sched-devel/latest .../mingo/linux-2.6-sched-devel.git
Signed-off-by: Mike Travis <travis@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-12 19:21:12 +00:00
|
|
|
#define EXPORT_EARLY_PER_CPU_SYMBOL(_name) \
|
|
|
|
|
EXPORT_PER_CPU_SYMBOL(_name)
|
|
|
|
|
|
|
|
|
|
#define DECLARE_EARLY_PER_CPU(_type, _name) \
|
|
|
|
|
DECLARE_PER_CPU(_type, _name)
|
|
|
|
|
|
2012-06-11 09:56:45 +00:00
|
|
|
#define DECLARE_EARLY_PER_CPU_READ_MOSTLY(_type, _name) \
|
|
|
|
|
DECLARE_PER_CPU_READ_MOSTLY(_type, _name)
|
|
|
|
|
|
x86: cleanup early per cpu variables/accesses v4
* Introduce a new PER_CPU macro called "EARLY_PER_CPU". This is
used by some per_cpu variables that are initialized and accessed
before there are per_cpu areas allocated.
["Early" in respect to per_cpu variables is "earlier than the per_cpu
areas have been setup".]
This patchset adds these new macros:
DEFINE_EARLY_PER_CPU(_type, _name, _initvalue)
EXPORT_EARLY_PER_CPU_SYMBOL(_name)
DECLARE_EARLY_PER_CPU(_type, _name)
early_per_cpu_ptr(_name)
early_per_cpu_map(_name, _idx)
early_per_cpu(_name, _cpu)
The DEFINE macro defines the per_cpu variable as well as the early
map and pointer. It also initializes the per_cpu variable and map
elements to "_initvalue". The early_* macros provide access to
the initial map (usually setup during system init) and the early
pointer. This pointer is initialized to point to the early map
but is then NULL'ed when the actual per_cpu areas are setup. After
that the per_cpu variable is the correct access to the variable.
The early_per_cpu() macro is not very efficient but does show how to
access the variable if you have a function that can be called both
"early" and "late". It tests the early ptr to be NULL, and if not
then it's still valid. Otherwise, the per_cpu variable is used
instead:
#define early_per_cpu(_name, _cpu) \
(early_per_cpu_ptr(_name) ? \
early_per_cpu_ptr(_name)[_cpu] : \
per_cpu(_name, _cpu))
A better method is to actually check the pointer manually. In the
case below, numa_set_node can be called both "early" and "late":
void __cpuinit numa_set_node(int cpu, int node)
{
int *cpu_to_node_map = early_per_cpu_ptr(x86_cpu_to_node_map);
if (cpu_to_node_map)
cpu_to_node_map[cpu] = node;
else
per_cpu(x86_cpu_to_node_map, cpu) = node;
}
* Add a flag "arch_provides_topology_pointers" that indicates pointers
to topology cpumask_t maps are available. Otherwise, use the function
returning the cpumask_t value. This is useful if cpumask_t set size
is very large to avoid copying data on to/off of the stack.
* The coverage of CONFIG_DEBUG_PER_CPU_MAPS has been increased while
the non-debug case has been optimized a bit.
* Remove an unreferenced compiler warning in drivers/base/topology.c
* Clean up #ifdef in setup.c
For inclusion into sched-devel/latest tree.
Based on:
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git
+ sched-devel/latest .../mingo/linux-2.6-sched-devel.git
Signed-off-by: Mike Travis <travis@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-12 19:21:12 +00:00
|
|
|
#define early_per_cpu(_name, _cpu) per_cpu(_name, _cpu)
|
|
|
|
|
#define early_per_cpu_ptr(_name) NULL
|
|
|
|
|
/* no early_per_cpu_map() */
|
|
|
|
|
|
|
|
|
|
#endif /* !CONFIG_SMP */
|
|
|
|
|
|
2008-10-23 05:26:29 +00:00
|
|
|
#endif /* _ASM_X86_PERCPU_H */
|
