linux/drivers/md/bcache/super.c

2513 lines
61 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0
/*
* bcache setup/teardown code, and some metadata io - read a superblock and
* figure out what to do with it.
*
* Copyright 2010, 2011 Kent Overstreet <kent.overstreet@gmail.com>
* Copyright 2012 Google, Inc.
*/
#include "bcache.h"
#include "btree.h"
#include "debug.h"
#include "extents.h"
#include "request.h"
#include "writeback.h"
#include <linux/blkdev.h>
#include <linux/buffer_head.h>
#include <linux/debugfs.h>
#include <linux/genhd.h>
#include <linux/idr.h>
#include <linux/kthread.h>
#include <linux/module.h>
#include <linux/random.h>
#include <linux/reboot.h>
#include <linux/sysfs.h>
unsigned int bch_cutoff_writeback;
unsigned int bch_cutoff_writeback_sync;
static const char bcache_magic[] = {
0xc6, 0x85, 0x73, 0xf6, 0x4e, 0x1a, 0x45, 0xca,
0x82, 0x65, 0xf5, 0x7f, 0x48, 0xba, 0x6d, 0x81
};
static const char invalid_uuid[] = {
0xa0, 0x3e, 0xf8, 0xed, 0x3e, 0xe1, 0xb8, 0x78,
0xc8, 0x50, 0xfc, 0x5e, 0xcb, 0x16, 0xcd, 0x99
};
static struct kobject *bcache_kobj;
struct mutex bch_register_lock;
LIST_HEAD(bch_cache_sets);
static LIST_HEAD(uncached_devices);
static int bcache_major;
bcache: rewrite multiple partitions support Current partition support of bcache is confusing and buggy. It tries to trace non-continuous device minor numbers by an ida bit string, and mistakenly mixed bcache device index with minor numbers. This design generates several negative results, - Index of bcache device name is not consecutive under /dev/. If there are 3 bcache devices, they name will be, /dev/bcache0, /dev/bcache16, /dev/bcache32 Only bcache code indexes bcache device name is such an interesting way. - First minor number of each bcache device is traced by ida bit string. One bcache device will occupy 16 bits, this is not a good idea. Indeed only one bit is enough. - Because minor number and bcache device index are mixed, a device index is allocated by ida_simple_get(), but an first minor number is sent into ida_simple_remove() to release the device. It confused original author too. Root cause of the above errors is, bcache code should not handle device minor numbers at all! A standard process to support multiple partitions in Linux kernel is, - Device driver provides major device number, and indexes multiple device instances. - Device driver does not allocat nor trace device minor number, only provides a first minor number of a given device instance, and sets how many minor numbers (paritions) the device instance may have. All rested stuffs are handled by block layer code, most of the details can be found from block/{genhd, partition-generic}.c files. This patch re-writes multiple partitions support for bcache. It makes whole things to be more clear, and uses ida bit string in a more efficeint way. - Ida bit string only traces bcache device index, not minor number. For a bcache device with 128 partitions, only one bit in ida bit string is enough. - Device minor number and device index are separated in concept. Device index is used for /dev node naming, and ida bit string trace. Minor number is calculated from device index and only used to initialize first_minor of a bcache device. - It does not follow any standard for 16 partitions on a bcache device. This patch sets 128 partitions on single bcache device at max, this is the limitation from GPT (GUID Partition Table) and supported by fdisk. Considering a typical device minor number is 20 bits width, each bcache device may have 128 partitions (7 bits), there can be 8192 bcache devices existing on system. For most common deployment for a single server in now days, it should be enough. [minor spelling fixes in commit message by Michael Lyle] Signed-off-by: Coly Li <colyli@suse.de> Cc: Eric Wheeler <bcache@lists.ewheeler.net> Cc: Junhui Tang <tang.junhui@zte.com.cn> Reviewed-by: Michael Lyle <mlyle@lyle.org> Signed-off-by: Michael Lyle <mlyle@lyle.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-10-13 23:35:31 +00:00
static DEFINE_IDA(bcache_device_idx);
static wait_queue_head_t unregister_wait;
struct workqueue_struct *bcache_wq;
struct workqueue_struct *bch_journal_wq;
#define BTREE_MAX_PAGES (256 * 1024 / PAGE_SIZE)
bcache: rewrite multiple partitions support Current partition support of bcache is confusing and buggy. It tries to trace non-continuous device minor numbers by an ida bit string, and mistakenly mixed bcache device index with minor numbers. This design generates several negative results, - Index of bcache device name is not consecutive under /dev/. If there are 3 bcache devices, they name will be, /dev/bcache0, /dev/bcache16, /dev/bcache32 Only bcache code indexes bcache device name is such an interesting way. - First minor number of each bcache device is traced by ida bit string. One bcache device will occupy 16 bits, this is not a good idea. Indeed only one bit is enough. - Because minor number and bcache device index are mixed, a device index is allocated by ida_simple_get(), but an first minor number is sent into ida_simple_remove() to release the device. It confused original author too. Root cause of the above errors is, bcache code should not handle device minor numbers at all! A standard process to support multiple partitions in Linux kernel is, - Device driver provides major device number, and indexes multiple device instances. - Device driver does not allocat nor trace device minor number, only provides a first minor number of a given device instance, and sets how many minor numbers (paritions) the device instance may have. All rested stuffs are handled by block layer code, most of the details can be found from block/{genhd, partition-generic}.c files. This patch re-writes multiple partitions support for bcache. It makes whole things to be more clear, and uses ida bit string in a more efficeint way. - Ida bit string only traces bcache device index, not minor number. For a bcache device with 128 partitions, only one bit in ida bit string is enough. - Device minor number and device index are separated in concept. Device index is used for /dev node naming, and ida bit string trace. Minor number is calculated from device index and only used to initialize first_minor of a bcache device. - It does not follow any standard for 16 partitions on a bcache device. This patch sets 128 partitions on single bcache device at max, this is the limitation from GPT (GUID Partition Table) and supported by fdisk. Considering a typical device minor number is 20 bits width, each bcache device may have 128 partitions (7 bits), there can be 8192 bcache devices existing on system. For most common deployment for a single server in now days, it should be enough. [minor spelling fixes in commit message by Michael Lyle] Signed-off-by: Coly Li <colyli@suse.de> Cc: Eric Wheeler <bcache@lists.ewheeler.net> Cc: Junhui Tang <tang.junhui@zte.com.cn> Reviewed-by: Michael Lyle <mlyle@lyle.org> Signed-off-by: Michael Lyle <mlyle@lyle.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-10-13 23:35:31 +00:00
/* limitation of partitions number on single bcache device */
#define BCACHE_MINORS 128
/* limitation of bcache devices number on single system */
#define BCACHE_DEVICE_IDX_MAX ((1U << MINORBITS)/BCACHE_MINORS)
/* Superblock */
static const char *read_super(struct cache_sb *sb, struct block_device *bdev,
struct page **res)
{
const char *err;
struct cache_sb *s;
struct buffer_head *bh = __bread(bdev, 1, SB_SIZE);
unsigned int i;
if (!bh)
return "IO error";
s = (struct cache_sb *) bh->b_data;
sb->offset = le64_to_cpu(s->offset);
sb->version = le64_to_cpu(s->version);
memcpy(sb->magic, s->magic, 16);
memcpy(sb->uuid, s->uuid, 16);
memcpy(sb->set_uuid, s->set_uuid, 16);
memcpy(sb->label, s->label, SB_LABEL_SIZE);
sb->flags = le64_to_cpu(s->flags);
sb->seq = le64_to_cpu(s->seq);
sb->last_mount = le32_to_cpu(s->last_mount);
sb->first_bucket = le16_to_cpu(s->first_bucket);
sb->keys = le16_to_cpu(s->keys);
for (i = 0; i < SB_JOURNAL_BUCKETS; i++)
sb->d[i] = le64_to_cpu(s->d[i]);
pr_debug("read sb version %llu, flags %llu, seq %llu, journal size %u",
sb->version, sb->flags, sb->seq, sb->keys);
err = "Not a bcache superblock";
if (sb->offset != SB_SECTOR)
goto err;
if (memcmp(sb->magic, bcache_magic, 16))
goto err;
err = "Too many journal buckets";
if (sb->keys > SB_JOURNAL_BUCKETS)
goto err;
err = "Bad checksum";
if (s->csum != csum_set(s))
goto err;
err = "Bad UUID";
if (bch_is_zero(sb->uuid, 16))
goto err;
sb->block_size = le16_to_cpu(s->block_size);
err = "Superblock block size smaller than device block size";
if (sb->block_size << 9 < bdev_logical_block_size(bdev))
goto err;
switch (sb->version) {
case BCACHE_SB_VERSION_BDEV:
sb->data_offset = BDEV_DATA_START_DEFAULT;
break;
case BCACHE_SB_VERSION_BDEV_WITH_OFFSET:
sb->data_offset = le64_to_cpu(s->data_offset);
err = "Bad data offset";
if (sb->data_offset < BDEV_DATA_START_DEFAULT)
goto err;
break;
case BCACHE_SB_VERSION_CDEV:
case BCACHE_SB_VERSION_CDEV_WITH_UUID:
sb->nbuckets = le64_to_cpu(s->nbuckets);
sb->bucket_size = le16_to_cpu(s->bucket_size);
sb->nr_in_set = le16_to_cpu(s->nr_in_set);
sb->nr_this_dev = le16_to_cpu(s->nr_this_dev);
err = "Too many buckets";
if (sb->nbuckets > LONG_MAX)
goto err;
err = "Not enough buckets";
if (sb->nbuckets < 1 << 7)
goto err;
err = "Bad block/bucket size";
if (!is_power_of_2(sb->block_size) ||
sb->block_size > PAGE_SECTORS ||
!is_power_of_2(sb->bucket_size) ||
sb->bucket_size < PAGE_SECTORS)
goto err;
err = "Invalid superblock: device too small";
if (get_capacity(bdev->bd_disk) <
sb->bucket_size * sb->nbuckets)
goto err;
err = "Bad UUID";
if (bch_is_zero(sb->set_uuid, 16))
goto err;
err = "Bad cache device number in set";
if (!sb->nr_in_set ||
sb->nr_in_set <= sb->nr_this_dev ||
sb->nr_in_set > MAX_CACHES_PER_SET)
goto err;
err = "Journal buckets not sequential";
for (i = 0; i < sb->keys; i++)
if (sb->d[i] != sb->first_bucket + i)
goto err;
err = "Too many journal buckets";
if (sb->first_bucket + sb->keys > sb->nbuckets)
goto err;
err = "Invalid superblock: first bucket comes before end of super";
if (sb->first_bucket * sb->bucket_size < 16)
goto err;
break;
default:
err = "Unsupported superblock version";
goto err;
}
sb->last_mount = (u32)ktime_get_real_seconds();
err = NULL;
get_page(bh->b_page);
*res = bh->b_page;
err:
put_bh(bh);
return err;
}
static void write_bdev_super_endio(struct bio *bio)
{
struct cached_dev *dc = bio->bi_private;
/* XXX: error checking */
closure_put(&dc->sb_write);
}
static void __write_super(struct cache_sb *sb, struct bio *bio)
{
struct cache_sb *out = page_address(bio_first_page_all(bio));
unsigned int i;
block: Abstract out bvec iterator Immutable biovecs are going to require an explicit iterator. To implement immutable bvecs, a later patch is going to add a bi_bvec_done member to this struct; for now, this patch effectively just renames things. Signed-off-by: Kent Overstreet <kmo@daterainc.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: "Ed L. Cashin" <ecashin@coraid.com> Cc: Nick Piggin <npiggin@kernel.dk> Cc: Lars Ellenberg <drbd-dev@lists.linbit.com> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Matthew Wilcox <willy@linux.intel.com> Cc: Geoff Levand <geoff@infradead.org> Cc: Yehuda Sadeh <yehuda@inktank.com> Cc: Sage Weil <sage@inktank.com> Cc: Alex Elder <elder@inktank.com> Cc: ceph-devel@vger.kernel.org Cc: Joshua Morris <josh.h.morris@us.ibm.com> Cc: Philip Kelleher <pjk1939@linux.vnet.ibm.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Neil Brown <neilb@suse.de> Cc: Alasdair Kergon <agk@redhat.com> Cc: Mike Snitzer <snitzer@redhat.com> Cc: dm-devel@redhat.com Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: linux390@de.ibm.com Cc: Boaz Harrosh <bharrosh@panasas.com> Cc: Benny Halevy <bhalevy@tonian.com> Cc: "James E.J. Bottomley" <JBottomley@parallels.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "Nicholas A. Bellinger" <nab@linux-iscsi.org> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Chris Mason <chris.mason@fusionio.com> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Andreas Dilger <adilger.kernel@dilger.ca> Cc: Jaegeuk Kim <jaegeuk.kim@samsung.com> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Dave Kleikamp <shaggy@kernel.org> Cc: Joern Engel <joern@logfs.org> Cc: Prasad Joshi <prasadjoshi.linux@gmail.com> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Cc: KONISHI Ryusuke <konishi.ryusuke@lab.ntt.co.jp> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Ben Myers <bpm@sgi.com> Cc: xfs@oss.sgi.com Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Len Brown <len.brown@intel.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Herton Ronaldo Krzesinski <herton.krzesinski@canonical.com> Cc: Ben Hutchings <ben@decadent.org.uk> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Guo Chao <yan@linux.vnet.ibm.com> Cc: Tejun Heo <tj@kernel.org> Cc: Asai Thambi S P <asamymuthupa@micron.com> Cc: Selvan Mani <smani@micron.com> Cc: Sam Bradshaw <sbradshaw@micron.com> Cc: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Cc: "Roger Pau Monné" <roger.pau@citrix.com> Cc: Jan Beulich <jbeulich@suse.com> Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Cc: Ian Campbell <Ian.Campbell@citrix.com> Cc: Sebastian Ott <sebott@linux.vnet.ibm.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Jiang Liu <jiang.liu@huawei.com> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Jerome Marchand <jmarchand@redhat.com> Cc: Joe Perches <joe@perches.com> Cc: Peng Tao <tao.peng@emc.com> Cc: Andy Adamson <andros@netapp.com> Cc: fanchaoting <fanchaoting@cn.fujitsu.com> Cc: Jie Liu <jeff.liu@oracle.com> Cc: Sunil Mushran <sunil.mushran@gmail.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: Namjae Jeon <namjae.jeon@samsung.com> Cc: Pankaj Kumar <pankaj.km@samsung.com> Cc: Dan Magenheimer <dan.magenheimer@oracle.com> Cc: Mel Gorman <mgorman@suse.de>6
2013-10-11 22:44:27 +00:00
bio->bi_iter.bi_sector = SB_SECTOR;
bio->bi_iter.bi_size = SB_SIZE;
bio_set_op_attrs(bio, REQ_OP_WRITE, REQ_SYNC|REQ_META);
bch_bio_map(bio, NULL);
out->offset = cpu_to_le64(sb->offset);
out->version = cpu_to_le64(sb->version);
memcpy(out->uuid, sb->uuid, 16);
memcpy(out->set_uuid, sb->set_uuid, 16);
memcpy(out->label, sb->label, SB_LABEL_SIZE);
out->flags = cpu_to_le64(sb->flags);
out->seq = cpu_to_le64(sb->seq);
out->last_mount = cpu_to_le32(sb->last_mount);
out->first_bucket = cpu_to_le16(sb->first_bucket);
out->keys = cpu_to_le16(sb->keys);
for (i = 0; i < sb->keys; i++)
out->d[i] = cpu_to_le64(sb->d[i]);
out->csum = csum_set(out);
pr_debug("ver %llu, flags %llu, seq %llu",
sb->version, sb->flags, sb->seq);
submit_bio(bio);
}
static void bch_write_bdev_super_unlock(struct closure *cl)
{
struct cached_dev *dc = container_of(cl, struct cached_dev, sb_write);
up(&dc->sb_write_mutex);
}
void bch_write_bdev_super(struct cached_dev *dc, struct closure *parent)
{
struct closure *cl = &dc->sb_write;
struct bio *bio = &dc->sb_bio;
down(&dc->sb_write_mutex);
closure_init(cl, parent);
bio_reset(bio);
bio_set_dev(bio, dc->bdev);
bio->bi_end_io = write_bdev_super_endio;
bio->bi_private = dc;
closure_get(cl);
/* I/O request sent to backing device */
__write_super(&dc->sb, bio);
closure_return_with_destructor(cl, bch_write_bdev_super_unlock);
}
static void write_super_endio(struct bio *bio)
{
struct cache *ca = bio->bi_private;
/* is_read = 0 */
bch_count_io_errors(ca, bio->bi_status, 0,
"writing superblock");
closure_put(&ca->set->sb_write);
}
static void bcache_write_super_unlock(struct closure *cl)
{
struct cache_set *c = container_of(cl, struct cache_set, sb_write);
up(&c->sb_write_mutex);
}
void bcache_write_super(struct cache_set *c)
{
struct closure *cl = &c->sb_write;
struct cache *ca;
unsigned int i;
down(&c->sb_write_mutex);
closure_init(cl, &c->cl);
c->sb.seq++;
for_each_cache(ca, c, i) {
struct bio *bio = &ca->sb_bio;
ca->sb.version = BCACHE_SB_VERSION_CDEV_WITH_UUID;
ca->sb.seq = c->sb.seq;
ca->sb.last_mount = c->sb.last_mount;
SET_CACHE_SYNC(&ca->sb, CACHE_SYNC(&c->sb));
bio_reset(bio);
bio_set_dev(bio, ca->bdev);
bio->bi_end_io = write_super_endio;
bio->bi_private = ca;
closure_get(cl);
__write_super(&ca->sb, bio);
}
closure_return_with_destructor(cl, bcache_write_super_unlock);
}
/* UUID io */
static void uuid_endio(struct bio *bio)
{
struct closure *cl = bio->bi_private;
struct cache_set *c = container_of(cl, struct cache_set, uuid_write);
cache_set_err_on(bio->bi_status, c, "accessing uuids");
bch_bbio_free(bio, c);
closure_put(cl);
}
static void uuid_io_unlock(struct closure *cl)
{
struct cache_set *c = container_of(cl, struct cache_set, uuid_write);
up(&c->uuid_write_mutex);
}
static void uuid_io(struct cache_set *c, int op, unsigned long op_flags,
struct bkey *k, struct closure *parent)
{
struct closure *cl = &c->uuid_write;
struct uuid_entry *u;
unsigned int i;
char buf[80];
BUG_ON(!parent);
down(&c->uuid_write_mutex);
closure_init(cl, parent);
for (i = 0; i < KEY_PTRS(k); i++) {
struct bio *bio = bch_bbio_alloc(c);
bio->bi_opf = REQ_SYNC | REQ_META | op_flags;
block: Abstract out bvec iterator Immutable biovecs are going to require an explicit iterator. To implement immutable bvecs, a later patch is going to add a bi_bvec_done member to this struct; for now, this patch effectively just renames things. Signed-off-by: Kent Overstreet <kmo@daterainc.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: "Ed L. Cashin" <ecashin@coraid.com> Cc: Nick Piggin <npiggin@kernel.dk> Cc: Lars Ellenberg <drbd-dev@lists.linbit.com> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Matthew Wilcox <willy@linux.intel.com> Cc: Geoff Levand <geoff@infradead.org> Cc: Yehuda Sadeh <yehuda@inktank.com> Cc: Sage Weil <sage@inktank.com> Cc: Alex Elder <elder@inktank.com> Cc: ceph-devel@vger.kernel.org Cc: Joshua Morris <josh.h.morris@us.ibm.com> Cc: Philip Kelleher <pjk1939@linux.vnet.ibm.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Neil Brown <neilb@suse.de> Cc: Alasdair Kergon <agk@redhat.com> Cc: Mike Snitzer <snitzer@redhat.com> Cc: dm-devel@redhat.com Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: linux390@de.ibm.com Cc: Boaz Harrosh <bharrosh@panasas.com> Cc: Benny Halevy <bhalevy@tonian.com> Cc: "James E.J. Bottomley" <JBottomley@parallels.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "Nicholas A. Bellinger" <nab@linux-iscsi.org> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Chris Mason <chris.mason@fusionio.com> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Andreas Dilger <adilger.kernel@dilger.ca> Cc: Jaegeuk Kim <jaegeuk.kim@samsung.com> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Dave Kleikamp <shaggy@kernel.org> Cc: Joern Engel <joern@logfs.org> Cc: Prasad Joshi <prasadjoshi.linux@gmail.com> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Cc: KONISHI Ryusuke <konishi.ryusuke@lab.ntt.co.jp> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Ben Myers <bpm@sgi.com> Cc: xfs@oss.sgi.com Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Len Brown <len.brown@intel.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Herton Ronaldo Krzesinski <herton.krzesinski@canonical.com> Cc: Ben Hutchings <ben@decadent.org.uk> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Guo Chao <yan@linux.vnet.ibm.com> Cc: Tejun Heo <tj@kernel.org> Cc: Asai Thambi S P <asamymuthupa@micron.com> Cc: Selvan Mani <smani@micron.com> Cc: Sam Bradshaw <sbradshaw@micron.com> Cc: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Cc: "Roger Pau Monné" <roger.pau@citrix.com> Cc: Jan Beulich <jbeulich@suse.com> Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Cc: Ian Campbell <Ian.Campbell@citrix.com> Cc: Sebastian Ott <sebott@linux.vnet.ibm.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Jiang Liu <jiang.liu@huawei.com> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Jerome Marchand <jmarchand@redhat.com> Cc: Joe Perches <joe@perches.com> Cc: Peng Tao <tao.peng@emc.com> Cc: Andy Adamson <andros@netapp.com> Cc: fanchaoting <fanchaoting@cn.fujitsu.com> Cc: Jie Liu <jeff.liu@oracle.com> Cc: Sunil Mushran <sunil.mushran@gmail.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: Namjae Jeon <namjae.jeon@samsung.com> Cc: Pankaj Kumar <pankaj.km@samsung.com> Cc: Dan Magenheimer <dan.magenheimer@oracle.com> Cc: Mel Gorman <mgorman@suse.de>6
2013-10-11 22:44:27 +00:00
bio->bi_iter.bi_size = KEY_SIZE(k) << 9;
bio->bi_end_io = uuid_endio;
bio->bi_private = cl;
bio_set_op_attrs(bio, op, REQ_SYNC|REQ_META|op_flags);
bch_bio_map(bio, c->uuids);
bch_submit_bbio(bio, c, k, i);
if (op != REQ_OP_WRITE)
break;
}
bch_extent_to_text(buf, sizeof(buf), k);
pr_debug("%s UUIDs at %s", op == REQ_OP_WRITE ? "wrote" : "read", buf);
for (u = c->uuids; u < c->uuids + c->nr_uuids; u++)
if (!bch_is_zero(u->uuid, 16))
pr_debug("Slot %zi: %pU: %s: 1st: %u last: %u inv: %u",
u - c->uuids, u->uuid, u->label,
u->first_reg, u->last_reg, u->invalidated);
closure_return_with_destructor(cl, uuid_io_unlock);
}
static char *uuid_read(struct cache_set *c, struct jset *j, struct closure *cl)
{
struct bkey *k = &j->uuid_bucket;
if (__bch_btree_ptr_invalid(c, k))
return "bad uuid pointer";
bkey_copy(&c->uuid_bucket, k);
uuid_io(c, REQ_OP_READ, 0, k, cl);
if (j->version < BCACHE_JSET_VERSION_UUIDv1) {
struct uuid_entry_v0 *u0 = (void *) c->uuids;
struct uuid_entry *u1 = (void *) c->uuids;
int i;
closure_sync(cl);
/*
* Since the new uuid entry is bigger than the old, we have to
* convert starting at the highest memory address and work down
* in order to do it in place
*/
for (i = c->nr_uuids - 1;
i >= 0;
--i) {
memcpy(u1[i].uuid, u0[i].uuid, 16);
memcpy(u1[i].label, u0[i].label, 32);
u1[i].first_reg = u0[i].first_reg;
u1[i].last_reg = u0[i].last_reg;
u1[i].invalidated = u0[i].invalidated;
u1[i].flags = 0;
u1[i].sectors = 0;
}
}
return NULL;
}
static int __uuid_write(struct cache_set *c)
{
BKEY_PADDED(key) k;
struct closure cl;
struct cache *ca;
closure_init_stack(&cl);
lockdep_assert_held(&bch_register_lock);
if (bch_bucket_alloc_set(c, RESERVE_BTREE, &k.key, 1, true))
return 1;
SET_KEY_SIZE(&k.key, c->sb.bucket_size);
uuid_io(c, REQ_OP_WRITE, 0, &k.key, &cl);
closure_sync(&cl);
/* Only one bucket used for uuid write */
ca = PTR_CACHE(c, &k.key, 0);
atomic_long_add(ca->sb.bucket_size, &ca->meta_sectors_written);
bkey_copy(&c->uuid_bucket, &k.key);
bkey_put(c, &k.key);
return 0;
}
int bch_uuid_write(struct cache_set *c)
{
int ret = __uuid_write(c);
if (!ret)
bch_journal_meta(c, NULL);
return ret;
}
static struct uuid_entry *uuid_find(struct cache_set *c, const char *uuid)
{
struct uuid_entry *u;
for (u = c->uuids;
u < c->uuids + c->nr_uuids; u++)
if (!memcmp(u->uuid, uuid, 16))
return u;
return NULL;
}
static struct uuid_entry *uuid_find_empty(struct cache_set *c)
{
static const char zero_uuid[16] = "\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0";
return uuid_find(c, zero_uuid);
}
/*
* Bucket priorities/gens:
*
* For each bucket, we store on disk its
* 8 bit gen
* 16 bit priority
*
* See alloc.c for an explanation of the gen. The priority is used to implement
* lru (and in the future other) cache replacement policies; for most purposes
* it's just an opaque integer.
*
* The gens and the priorities don't have a whole lot to do with each other, and
* it's actually the gens that must be written out at specific times - it's no
* big deal if the priorities don't get written, if we lose them we just reuse
* buckets in suboptimal order.
*
* On disk they're stored in a packed array, and in as many buckets are required
* to fit them all. The buckets we use to store them form a list; the journal
* header points to the first bucket, the first bucket points to the second
* bucket, et cetera.
*
* This code is used by the allocation code; periodically (whenever it runs out
* of buckets to allocate from) the allocation code will invalidate some
* buckets, but it can't use those buckets until their new gens are safely on
* disk.
*/
static void prio_endio(struct bio *bio)
{
struct cache *ca = bio->bi_private;
cache_set_err_on(bio->bi_status, ca->set, "accessing priorities");
bch_bbio_free(bio, ca->set);
closure_put(&ca->prio);
}
static void prio_io(struct cache *ca, uint64_t bucket, int op,
unsigned long op_flags)
{
struct closure *cl = &ca->prio;
struct bio *bio = bch_bbio_alloc(ca->set);
closure_init_stack(cl);
block: Abstract out bvec iterator Immutable biovecs are going to require an explicit iterator. To implement immutable bvecs, a later patch is going to add a bi_bvec_done member to this struct; for now, this patch effectively just renames things. Signed-off-by: Kent Overstreet <kmo@daterainc.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: "Ed L. Cashin" <ecashin@coraid.com> Cc: Nick Piggin <npiggin@kernel.dk> Cc: Lars Ellenberg <drbd-dev@lists.linbit.com> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Matthew Wilcox <willy@linux.intel.com> Cc: Geoff Levand <geoff@infradead.org> Cc: Yehuda Sadeh <yehuda@inktank.com> Cc: Sage Weil <sage@inktank.com> Cc: Alex Elder <elder@inktank.com> Cc: ceph-devel@vger.kernel.org Cc: Joshua Morris <josh.h.morris@us.ibm.com> Cc: Philip Kelleher <pjk1939@linux.vnet.ibm.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Neil Brown <neilb@suse.de> Cc: Alasdair Kergon <agk@redhat.com> Cc: Mike Snitzer <snitzer@redhat.com> Cc: dm-devel@redhat.com Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: linux390@de.ibm.com Cc: Boaz Harrosh <bharrosh@panasas.com> Cc: Benny Halevy <bhalevy@tonian.com> Cc: "James E.J. Bottomley" <JBottomley@parallels.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "Nicholas A. Bellinger" <nab@linux-iscsi.org> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Chris Mason <chris.mason@fusionio.com> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Andreas Dilger <adilger.kernel@dilger.ca> Cc: Jaegeuk Kim <jaegeuk.kim@samsung.com> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Dave Kleikamp <shaggy@kernel.org> Cc: Joern Engel <joern@logfs.org> Cc: Prasad Joshi <prasadjoshi.linux@gmail.com> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Cc: KONISHI Ryusuke <konishi.ryusuke@lab.ntt.co.jp> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Ben Myers <bpm@sgi.com> Cc: xfs@oss.sgi.com Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Len Brown <len.brown@intel.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Herton Ronaldo Krzesinski <herton.krzesinski@canonical.com> Cc: Ben Hutchings <ben@decadent.org.uk> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Guo Chao <yan@linux.vnet.ibm.com> Cc: Tejun Heo <tj@kernel.org> Cc: Asai Thambi S P <asamymuthupa@micron.com> Cc: Selvan Mani <smani@micron.com> Cc: Sam Bradshaw <sbradshaw@micron.com> Cc: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Cc: "Roger Pau Monné" <roger.pau@citrix.com> Cc: Jan Beulich <jbeulich@suse.com> Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Cc: Ian Campbell <Ian.Campbell@citrix.com> Cc: Sebastian Ott <sebott@linux.vnet.ibm.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Jiang Liu <jiang.liu@huawei.com> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Jerome Marchand <jmarchand@redhat.com> Cc: Joe Perches <joe@perches.com> Cc: Peng Tao <tao.peng@emc.com> Cc: Andy Adamson <andros@netapp.com> Cc: fanchaoting <fanchaoting@cn.fujitsu.com> Cc: Jie Liu <jeff.liu@oracle.com> Cc: Sunil Mushran <sunil.mushran@gmail.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: Namjae Jeon <namjae.jeon@samsung.com> Cc: Pankaj Kumar <pankaj.km@samsung.com> Cc: Dan Magenheimer <dan.magenheimer@oracle.com> Cc: Mel Gorman <mgorman@suse.de>6
2013-10-11 22:44:27 +00:00
bio->bi_iter.bi_sector = bucket * ca->sb.bucket_size;
bio_set_dev(bio, ca->bdev);
block: Abstract out bvec iterator Immutable biovecs are going to require an explicit iterator. To implement immutable bvecs, a later patch is going to add a bi_bvec_done member to this struct; for now, this patch effectively just renames things. Signed-off-by: Kent Overstreet <kmo@daterainc.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: "Ed L. Cashin" <ecashin@coraid.com> Cc: Nick Piggin <npiggin@kernel.dk> Cc: Lars Ellenberg <drbd-dev@lists.linbit.com> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Matthew Wilcox <willy@linux.intel.com> Cc: Geoff Levand <geoff@infradead.org> Cc: Yehuda Sadeh <yehuda@inktank.com> Cc: Sage Weil <sage@inktank.com> Cc: Alex Elder <elder@inktank.com> Cc: ceph-devel@vger.kernel.org Cc: Joshua Morris <josh.h.morris@us.ibm.com> Cc: Philip Kelleher <pjk1939@linux.vnet.ibm.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Neil Brown <neilb@suse.de> Cc: Alasdair Kergon <agk@redhat.com> Cc: Mike Snitzer <snitzer@redhat.com> Cc: dm-devel@redhat.com Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: linux390@de.ibm.com Cc: Boaz Harrosh <bharrosh@panasas.com> Cc: Benny Halevy <bhalevy@tonian.com> Cc: "James E.J. Bottomley" <JBottomley@parallels.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "Nicholas A. Bellinger" <nab@linux-iscsi.org> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Chris Mason <chris.mason@fusionio.com> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Andreas Dilger <adilger.kernel@dilger.ca> Cc: Jaegeuk Kim <jaegeuk.kim@samsung.com> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Dave Kleikamp <shaggy@kernel.org> Cc: Joern Engel <joern@logfs.org> Cc: Prasad Joshi <prasadjoshi.linux@gmail.com> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Cc: KONISHI Ryusuke <konishi.ryusuke@lab.ntt.co.jp> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Ben Myers <bpm@sgi.com> Cc: xfs@oss.sgi.com Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Len Brown <len.brown@intel.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: Herton Ronaldo Krzesinski <herton.krzesinski@canonical.com> Cc: Ben Hutchings <ben@decadent.org.uk> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Guo Chao <yan@linux.vnet.ibm.com> Cc: Tejun Heo <tj@kernel.org> Cc: Asai Thambi S P <asamymuthupa@micron.com> Cc: Selvan Mani <smani@micron.com> Cc: Sam Bradshaw <sbradshaw@micron.com> Cc: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Cc: "Roger Pau Monné" <roger.pau@citrix.com> Cc: Jan Beulich <jbeulich@suse.com> Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Cc: Ian Campbell <Ian.Campbell@citrix.com> Cc: Sebastian Ott <sebott@linux.vnet.ibm.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Jiang Liu <jiang.liu@huawei.com> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Jerome Marchand <jmarchand@redhat.com> Cc: Joe Perches <joe@perches.com> Cc: Peng Tao <tao.peng@emc.com> Cc: Andy Adamson <andros@netapp.com> Cc: fanchaoting <fanchaoting@cn.fujitsu.com> Cc: Jie Liu <jeff.liu@oracle.com> Cc: Sunil Mushran <sunil.mushran@gmail.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: Namjae Jeon <namjae.jeon@samsung.com> Cc: Pankaj Kumar <pankaj.km@samsung.com> Cc: Dan Magenheimer <dan.magenheimer@oracle.com> Cc: Mel Gorman <mgorman@suse.de>6
2013-10-11 22:44:27 +00:00
bio->bi_iter.bi_size = bucket_bytes(ca);
bio->bi_end_io = prio_endio;
bio->bi_private = ca;
bio_set_op_attrs(bio, op, REQ_SYNC|REQ_META|op_flags);
bch_bio_map(bio, ca->disk_buckets);
bcache: add CACHE_SET_IO_DISABLE to struct cache_set flags When too many I/Os failed on cache device, bch_cache_set_error() is called in the error handling code path to retire whole problematic cache set. If new I/O requests continue to come and take refcount dc->count, the cache set won't be retired immediately, this is a problem. Further more, there are several kernel thread and self-armed kernel work may still running after bch_cache_set_error() is called. It needs to wait quite a while for them to stop, or they won't stop at all. They also prevent the cache set from being retired. The solution in this patch is, to add per cache set flag to disable I/O request on this cache and all attached backing devices. Then new coming I/O requests can be rejected in *_make_request() before taking refcount, kernel threads and self-armed kernel worker can stop very fast when flags bit CACHE_SET_IO_DISABLE is set. Because bcache also do internal I/Os for writeback, garbage collection, bucket allocation, journaling, this kind of I/O should be disabled after bch_cache_set_error() is called. So closure_bio_submit() is modified to check whether CACHE_SET_IO_DISABLE is set on cache_set->flags. If set, closure_bio_submit() will set bio->bi_status to BLK_STS_IOERR and return, generic_make_request() won't be called. A sysfs interface is also added to set or clear CACHE_SET_IO_DISABLE bit from cache_set->flags, to disable or enable cache set I/O for debugging. It is helpful to trigger more corner case issues for failed cache device. Changelog v4, add wait_for_kthread_stop(), and call it before exits writeback and gc kernel threads. v3, change CACHE_SET_IO_DISABLE from 4 to 3, since it is bit index. remove "bcache: " prefix when printing out kernel message. v2, more changes by previous review, - Use CACHE_SET_IO_DISABLE of cache_set->flags, suggested by Junhui. - Check CACHE_SET_IO_DISABLE in bch_btree_gc() to stop a while-loop, this is reported and inspired from origal patch of Pavel Vazharov. v1, initial version. Signed-off-by: Coly Li <colyli@suse.de> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Michael Lyle <mlyle@lyle.org> Cc: Junhui Tang <tang.junhui@zte.com.cn> Cc: Michael Lyle <mlyle@lyle.org> Cc: Pavel Vazharov <freakpv@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-03-19 00:36:17 +00:00
closure_bio_submit(ca->set, bio, &ca->prio);
closure_sync(cl);
}
void bch_prio_write(struct cache *ca)
{
int i;
struct bucket *b;
struct closure cl;
closure_init_stack(&cl);
lockdep_assert_held(&ca->set->bucket_lock);
ca->disk_buckets->seq++;
atomic_long_add(ca->sb.bucket_size * prio_buckets(ca),
&ca->meta_sectors_written);
//pr_debug("free %zu, free_inc %zu, unused %zu", fifo_used(&ca->free),
// fifo_used(&ca->free_inc), fifo_used(&ca->unused));
for (i = prio_buckets(ca) - 1; i >= 0; --i) {
long bucket;
struct prio_set *p = ca->disk_buckets;
struct bucket_disk *d = p->data;
struct bucket_disk *end = d + prios_per_bucket(ca);
for (b = ca->buckets + i * prios_per_bucket(ca);
b < ca->buckets + ca->sb.nbuckets && d < end;
b++, d++) {
d->prio = cpu_to_le16(b->prio);
d->gen = b->gen;
}
p->next_bucket = ca->prio_buckets[i + 1];
p->magic = pset_magic(&ca->sb);
p->csum = bch_crc64(&p->magic, bucket_bytes(ca) - 8);
bucket = bch_bucket_alloc(ca, RESERVE_PRIO, true);
BUG_ON(bucket == -1);
mutex_unlock(&ca->set->bucket_lock);
prio_io(ca, bucket, REQ_OP_WRITE, 0);
mutex_lock(&ca->set->bucket_lock);
ca->prio_buckets[i] = bucket;
atomic_dec_bug(&ca->buckets[bucket].pin);
}
mutex_unlock(&ca->set->bucket_lock);
bch_journal_meta(ca->set, &cl);
closure_sync(&cl);
mutex_lock(&ca->set->bucket_lock);
/*
* Don't want the old priorities to get garbage collected until after we
* finish writing the new ones, and they're journalled
*/
for (i = 0; i < prio_buckets(ca); i++) {
if (ca->prio_last_buckets[i])
__bch_bucket_free(ca,
&ca->buckets[ca->prio_last_buckets[i]]);
ca->prio_last_buckets[i] = ca->prio_buckets[i];
}
}
static void prio_read(struct cache *ca, uint64_t bucket)
{
struct prio_set *p = ca->disk_buckets;
struct bucket_disk *d = p->data + prios_per_bucket(ca), *end = d;
struct bucket *b;
unsigned int bucket_nr = 0;
for (b = ca->buckets;
b < ca->buckets + ca->sb.nbuckets;
b++, d++) {
if (d == end) {
ca->prio_buckets[bucket_nr] = bucket;
ca->prio_last_buckets[bucket_nr] = bucket;
bucket_nr++;
prio_io(ca, bucket, REQ_OP_READ, 0);
if (p->csum !=
bch_crc64(&p->magic, bucket_bytes(ca) - 8))
pr_warn("bad csum reading priorities");
if (p->magic != pset_magic(&ca->sb))
pr_warn("bad magic reading priorities");
bucket = p->next_bucket;
d = p->data;
}
b->prio = le16_to_cpu(d->prio);
b->gen = b->last_gc = d->gen;
}
}
/* Bcache device */
static int open_dev(struct block_device *b, fmode_t mode)
{
struct bcache_device *d = b->bd_disk->private_data;
if (test_bit(BCACHE_DEV_CLOSING, &d->flags))
return -ENXIO;
closure_get(&d->cl);
return 0;
}
static void release_dev(struct gendisk *b, fmode_t mode)
{
struct bcache_device *d = b->private_data;
closure_put(&d->cl);
}
static int ioctl_dev(struct block_device *b, fmode_t mode,
unsigned int cmd, unsigned long arg)
{
struct bcache_device *d = b->bd_disk->private_data;
bcache: stop bcache device when backing device is offline Currently bcache does not handle backing device failure, if backing device is offline and disconnected from system, its bcache device can still be accessible. If the bcache device is in writeback mode, I/O requests even can success if the requests hit on cache device. That is to say, when and how bcache handles offline backing device is undefined. This patch tries to handle backing device offline in a rather simple way, - Add cached_dev->status_update_thread kernel thread to update backing device status in every 1 second. - Add cached_dev->offline_seconds to record how many seconds the backing device is observed to be offline. If the backing device is offline for BACKING_DEV_OFFLINE_TIMEOUT (30) seconds, set dc->io_disable to 1 and call bcache_device_stop() to stop the bache device which linked to the offline backing device. Now if a backing device is offline for BACKING_DEV_OFFLINE_TIMEOUT seconds, its bcache device will be removed, then user space application writing on it will get error immediately, and handler the device failure in time. This patch is quite simple, does not handle more complicated situations. Once the bcache device is stopped, users need to recovery the backing device, register and attach it manually. Changelog: v3: call wait_for_kthread_stop() before exits kernel thread. v2: remove "bcache: " prefix when calling pr_warn(). v1: initial version. Signed-off-by: Coly Li <colyli@suse.de> Reviewed-by: Hannes Reinecke <hare@suse.com> Cc: Michael Lyle <mlyle@lyle.org> Cc: Junhui Tang <tang.junhui@zte.com.cn> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-05-28 07:37:41 +00:00
return d->ioctl(d, mode, cmd, arg);
}
static const struct block_device_operations bcache_ops = {
.open = open_dev,
.release = release_dev,
.ioctl = ioctl_dev,
.owner = THIS_MODULE,
};
void bcache_device_stop(struct bcache_device *d)
{
if (!test_and_set_bit(BCACHE_DEV_CLOSING, &d->flags))
closure_queue(&d->cl);
}
static void bcache_device_unlink(struct bcache_device *d)
{
lockdep_assert_held(&bch_register_lock);
if (d->c && !test_and_set_bit(BCACHE_DEV_UNLINK_DONE, &d->flags)) {
unsigned int i;
struct cache *ca;
sysfs_remove_link(&d->c->kobj, d->name);
sysfs_remove_link(&d->kobj, "cache");
for_each_cache(ca, d->c, i)
bd_unlink_disk_holder(ca->bdev, d->disk);
}
}
static void bcache_device_link(struct bcache_device *d, struct cache_set *c,
const char *name)
{
unsigned int i;
struct cache *ca;
for_each_cache(ca, d->c, i)
bd_link_disk_holder(ca->bdev, d->disk);
snprintf(d->name, BCACHEDEVNAME_SIZE,
"%s%u", name, d->id);
WARN(sysfs_create_link(&d->kobj, &c->kobj, "cache") ||
sysfs_create_link(&c->kobj, &d->kobj, d->name),
"Couldn't create device <-> cache set symlinks");
bcache: clear BCACHE_DEV_UNLINK_DONE flag when attaching a backing device This bug can be reproduced by the following script: #!/bin/bash bcache_sysfs="/sys/fs/bcache" function clear_cache() { if [ ! -e $bcache_sysfs ]; then echo "no bcache sysfs" exit fi cset_uuid=$(ls -l $bcache_sysfs|head -n 2|tail -n 1|awk '{print $9}') sudo sh -c "echo $cset_uuid > /sys/block/sdb/sdb1/bcache/detach" sleep 5 sudo sh -c "echo $cset_uuid > /sys/block/sdb/sdb1/bcache/attach" } for ((i=0;i<10;i++)); do clear_cache done The warning messages look like below: [ 275.948611] ------------[ cut here ]------------ [ 275.963840] WARNING: at fs/sysfs/dir.c:512 sysfs_add_one+0xb8/0xd0() (Tainted: P W --------------- ) [ 275.979253] Hardware name: Tecal RH2285 [ 275.994106] sysfs: cannot create duplicate filename '/devices/pci0000:00/0000:00:09.0/0000:08:00.0/host4/target4:2:1/4:2:1:0/block/sdb/sdb1/bcache/cache' [ 276.024105] Modules linked in: bcache tcp_diag inet_diag ipmi_devintf ipmi_si ipmi_msghandler bonding 8021q garp stp llc ipv6 ext3 jbd loop sg iomemory_vsl(P) bnx2 microcode serio_raw i2c_i801 i2c_core iTCO_wdt iTCO_vendor_support i7core_edac edac_core shpchp ext4 jbd2 mbcache megaraid_sas pata_acpi ata_generic ata_piix dm_mod [last unloaded: scsi_wait_scan] [ 276.072643] Pid: 2765, comm: sh Tainted: P W --------------- 2.6.32 #1 [ 276.089315] Call Trace: [ 276.105801] [<ffffffff81070fe7>] ? warn_slowpath_common+0x87/0xc0 [ 276.122650] [<ffffffff810710d6>] ? warn_slowpath_fmt+0x46/0x50 [ 276.139361] [<ffffffff81205c08>] ? sysfs_add_one+0xb8/0xd0 [ 276.156012] [<ffffffff8120609b>] ? sysfs_do_create_link+0x12b/0x170 [ 276.172682] [<ffffffff81206113>] ? sysfs_create_link+0x13/0x20 [ 276.189282] [<ffffffffa03bda21>] ? bcache_device_link+0xc1/0x110 [bcache] [ 276.205993] [<ffffffffa03bfa08>] ? bch_cached_dev_attach+0x478/0x4f0 [bcache] [ 276.222794] [<ffffffffa03c4a17>] ? bch_cached_dev_store+0x627/0x780 [bcache] [ 276.239680] [<ffffffff8116783a>] ? alloc_pages_current+0xaa/0x110 [ 276.256594] [<ffffffff81203b15>] ? sysfs_write_file+0xe5/0x170 [ 276.273364] [<ffffffff811887b8>] ? vfs_write+0xb8/0x1a0 [ 276.290133] [<ffffffff811890b1>] ? sys_write+0x51/0x90 [ 276.306368] [<ffffffff8100c072>] ? system_call_fastpath+0x16/0x1b [ 276.322301] ---[ end trace 9f5d4fcdd0c3edfb ]--- [ 276.338241] ------------[ cut here ]------------ [ 276.354109] WARNING: at /home/wenqing.lz/bcache/bcache/super.c:720 bcache_device_link+0xdf/0x110 [bcache]() (Tainted: P W --------------- ) [ 276.386017] Hardware name: Tecal RH2285 [ 276.401430] Couldn't create device <-> cache set symlinks [ 276.401759] Modules linked in: bcache tcp_diag inet_diag ipmi_devintf ipmi_si ipmi_msghandler bonding 8021q garp stp llc ipv6 ext3 jbd loop sg iomemory_vsl(P) bnx2 microcode serio_raw i2c_i801 i2c_core iTCO_wdt iTCO_vendor_support i7core_edac edac_core shpchp ext4 jbd2 mbcache megaraid_sas pata_acpi ata_generic ata_piix dm_mod [last unloaded: scsi_wait_scan] [ 276.465477] Pid: 2765, comm: sh Tainted: P W --------------- 2.6.32 #1 [ 276.482169] Call Trace: [ 276.498610] [<ffffffff81070fe7>] ? warn_slowpath_common+0x87/0xc0 [ 276.515405] [<ffffffff810710d6>] ? warn_slowpath_fmt+0x46/0x50 [ 276.532059] [<ffffffffa03bda3f>] ? bcache_device_link+0xdf/0x110 [bcache] [ 276.548808] [<ffffffffa03bfa08>] ? bch_cached_dev_attach+0x478/0x4f0 [bcache] [ 276.565569] [<ffffffffa03c4a17>] ? bch_cached_dev_store+0x627/0x780 [bcache] [ 276.582418] [<ffffffff8116783a>] ? alloc_pages_current+0xaa/0x110 [ 276.599341] [<ffffffff81203b15>] ? sysfs_write_file+0xe5/0x170 [ 276.616142] [<ffffffff811887b8>] ? vfs_write+0xb8/0x1a0 [ 276.632607] [<ffffffff811890b1>] ? sys_write+0x51/0x90 [ 276.648671] [<ffffffff8100c072>] ? system_call_fastpath+0x16/0x1b [ 276.664756] ---[ end trace 9f5d4fcdd0c3edfc ]--- We forget to clear BCACHE_DEV_UNLINK_DONE flag in bcache_device_attach() function when we attach a backing device first time. After detaching this backing device, this flag will be true and sysfs_remove_link() isn't called in bcache_device_unlink(). Then when we attach this backing device again, sysfs_create_link() will return EEXIST error in bcache_device_link(). So the fix is trival and we clear this flag in bcache_device_link(). Signed-off-by: Zheng Liu <wenqing.lz@taobao.com> Tested-by: Joshua Schmid <jschmid@suse.com> Tested-by: Eric Wheeler <bcache@linux.ewheeler.net> Cc: Kent Overstreet <kmo@daterainc.com> Cc: stable@vger.kernel.org Signed-off-by: Jens Axboe <axboe@fb.com>
2015-11-30 01:19:32 +00:00
clear_bit(BCACHE_DEV_UNLINK_DONE, &d->flags);
}
static void bcache_device_detach(struct bcache_device *d)
{
lockdep_assert_held(&bch_register_lock);
bcache: set max writeback rate when I/O request is idle Commit b1092c9af9ed ("bcache: allow quick writeback when backing idle") allows the writeback rate to be faster if there is no I/O request on a bcache device. It works well if there is only one bcache device attached to the cache set. If there are many bcache devices attached to a cache set, it may introduce performance regression because multiple faster writeback threads of the idle bcache devices will compete the btree level locks with the bcache device who have I/O requests coming. This patch fixes the above issue by only permitting fast writebac when all bcache devices attached on the cache set are idle. And if one of the bcache devices has new I/O request coming, minimized all writeback throughput immediately and let PI controller __update_writeback_rate() to decide the upcoming writeback rate for each bcache device. Also when all bcache devices are idle, limited wrieback rate to a small number is wast of thoughput, especially when backing devices are slower non-rotation devices (e.g. SATA SSD). This patch sets a max writeback rate for each backing device if the whole cache set is idle. A faster writeback rate in idle time means new I/Os may have more available space for dirty data, and people may observe a better write performance then. Please note bcache may change its cache mode in run time, and this patch still works if the cache mode is switched from writeback mode and there is still dirty data on cache. Fixes: Commit b1092c9af9ed ("bcache: allow quick writeback when backing idle") Cc: stable@vger.kernel.org #4.16+ Signed-off-by: Coly Li <colyli@suse.de> Tested-by: Kai Krakow <kai@kaishome.de> Tested-by: Stefan Priebe <s.priebe@profihost.ag> Cc: Michael Lyle <mlyle@lyle.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-08-09 07:48:49 +00:00
atomic_dec(&d->c->attached_dev_nr);
if (test_bit(BCACHE_DEV_DETACHING, &d->flags)) {
struct uuid_entry *u = d->c->uuids + d->id;
SET_UUID_FLASH_ONLY(u, 0);
memcpy(u->uuid, invalid_uuid, 16);
u->invalidated = cpu_to_le32((u32)ktime_get_real_seconds());
bch_uuid_write(d->c);
}
bcache_device_unlink(d);
d->c->devices[d->id] = NULL;
closure_put(&d->c->caching);
d->c = NULL;
}
static void bcache_device_attach(struct bcache_device *d, struct cache_set *c,
unsigned int id)
{
d->id = id;
d->c = c;
c->devices[id] = d;
if (id >= c->devices_max_used)
c->devices_max_used = id + 1;
closure_get(&c->caching);
}
bcache: rewrite multiple partitions support Current partition support of bcache is confusing and buggy. It tries to trace non-continuous device minor numbers by an ida bit string, and mistakenly mixed bcache device index with minor numbers. This design generates several negative results, - Index of bcache device name is not consecutive under /dev/. If there are 3 bcache devices, they name will be, /dev/bcache0, /dev/bcache16, /dev/bcache32 Only bcache code indexes bcache device name is such an interesting way. - First minor number of each bcache device is traced by ida bit string. One bcache device will occupy 16 bits, this is not a good idea. Indeed only one bit is enough. - Because minor number and bcache device index are mixed, a device index is allocated by ida_simple_get(), but an first minor number is sent into ida_simple_remove() to release the device. It confused original author too. Root cause of the above errors is, bcache code should not handle device minor numbers at all! A standard process to support multiple partitions in Linux kernel is, - Device driver provides major device number, and indexes multiple device instances. - Device driver does not allocat nor trace device minor number, only provides a first minor number of a given device instance, and sets how many minor numbers (paritions) the device instance may have. All rested stuffs are handled by block layer code, most of the details can be found from block/{genhd, partition-generic}.c files. This patch re-writes multiple partitions support for bcache. It makes whole things to be more clear, and uses ida bit string in a more efficeint way. - Ida bit string only traces bcache device index, not minor number. For a bcache device with 128 partitions, only one bit in ida bit string is enough. - Device minor number and device index are separated in concept. Device index is used for /dev node naming, and ida bit string trace. Minor number is calculated from device index and only used to initialize first_minor of a bcache device. - It does not follow any standard for 16 partitions on a bcache device. This patch sets 128 partitions on single bcache device at max, this is the limitation from GPT (GUID Partition Table) and supported by fdisk. Considering a typical device minor number is 20 bits width, each bcache device may have 128 partitions (7 bits), there can be 8192 bcache devices existing on system. For most common deployment for a single server in now days, it should be enough. [minor spelling fixes in commit message by Michael Lyle] Signed-off-by: Coly Li <colyli@suse.de> Cc: Eric Wheeler <bcache@lists.ewheeler.net> Cc: Junhui Tang <tang.junhui@zte.com.cn> Reviewed-by: Michael Lyle <mlyle@lyle.org> Signed-off-by: Michael Lyle <mlyle@lyle.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-10-13 23:35:31 +00:00
static inline int first_minor_to_idx(int first_minor)
{
return (first_minor/BCACHE_MINORS);
}
static inline int idx_to_first_minor(int idx)
{
return (idx * BCACHE_MINORS);
}
static void bcache_device_free(struct bcache_device *d)
{
lockdep_assert_held(&bch_register_lock);
pr_info("%s stopped", d->disk->disk_name);
if (d->c)
bcache_device_detach(d);
if (d->disk && d->disk->flags & GENHD_FL_UP)
del_gendisk(d->disk);
if (d->disk && d->disk->queue)
blk_cleanup_queue(d->disk->queue);
if (d->disk) {
bcache: rewrite multiple partitions support Current partition support of bcache is confusing and buggy. It tries to trace non-continuous device minor numbers by an ida bit string, and mistakenly mixed bcache device index with minor numbers. This design generates several negative results, - Index of bcache device name is not consecutive under /dev/. If there are 3 bcache devices, they name will be, /dev/bcache0, /dev/bcache16, /dev/bcache32 Only bcache code indexes bcache device name is such an interesting way. - First minor number of each bcache device is traced by ida bit string. One bcache device will occupy 16 bits, this is not a good idea. Indeed only one bit is enough. - Because minor number and bcache device index are mixed, a device index is allocated by ida_simple_get(), but an first minor number is sent into ida_simple_remove() to release the device. It confused original author too. Root cause of the above errors is, bcache code should not handle device minor numbers at all! A standard process to support multiple partitions in Linux kernel is, - Device driver provides major device number, and indexes multiple device instances. - Device driver does not allocat nor trace device minor number, only provides a first minor number of a given device instance, and sets how many minor numbers (paritions) the device instance may have. All rested stuffs are handled by block layer code, most of the details can be found from block/{genhd, partition-generic}.c files. This patch re-writes multiple partitions support for bcache. It makes whole things to be more clear, and uses ida bit string in a more efficeint way. - Ida bit string only traces bcache device index, not minor number. For a bcache device with 128 partitions, only one bit in ida bit string is enough. - Device minor number and device index are separated in concept. Device index is used for /dev node naming, and ida bit string trace. Minor number is calculated from device index and only used to initialize first_minor of a bcache device. - It does not follow any standard for 16 partitions on a bcache device. This patch sets 128 partitions on single bcache device at max, this is the limitation from GPT (GUID Partition Table) and supported by fdisk. Considering a typical device minor number is 20 bits width, each bcache device may have 128 partitions (7 bits), there can be 8192 bcache devices existing on system. For most common deployment for a single server in now days, it should be enough. [minor spelling fixes in commit message by Michael Lyle] Signed-off-by: Coly Li <colyli@suse.de> Cc: Eric Wheeler <bcache@lists.ewheeler.net> Cc: Junhui Tang <tang.junhui@zte.com.cn> Reviewed-by: Michael Lyle <mlyle@lyle.org> Signed-off-by: Michael Lyle <mlyle@lyle.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-10-13 23:35:31 +00:00
ida_simple_remove(&bcache_device_idx,
first_minor_to_idx(d->disk->first_minor));
put_disk(d->disk);
}
bioset_exit(&d->bio_split);
kvfree(d->full_dirty_stripes);
kvfree(d->stripe_sectors_dirty);
closure_debug_destroy(&d->cl);
}
static int bcache_device_init(struct bcache_device *d, unsigned int block_size,
sector_t sectors)
{
struct request_queue *q;
const size_t max_stripes = min_t(size_t, INT_MAX,
SIZE_MAX / sizeof(atomic_t));
size_t n;
bcache: rewrite multiple partitions support Current partition support of bcache is confusing and buggy. It tries to trace non-continuous device minor numbers by an ida bit string, and mistakenly mixed bcache device index with minor numbers. This design generates several negative results, - Index of bcache device name is not consecutive under /dev/. If there are 3 bcache devices, they name will be, /dev/bcache0, /dev/bcache16, /dev/bcache32 Only bcache code indexes bcache device name is such an interesting way. - First minor number of each bcache device is traced by ida bit string. One bcache device will occupy 16 bits, this is not a good idea. Indeed only one bit is enough. - Because minor number and bcache device index are mixed, a device index is allocated by ida_simple_get(), but an first minor number is sent into ida_simple_remove() to release the device. It confused original author too. Root cause of the above errors is, bcache code should not handle device minor numbers at all! A standard process to support multiple partitions in Linux kernel is, - Device driver provides major device number, and indexes multiple device instances. - Device driver does not allocat nor trace device minor number, only provides a first minor number of a given device instance, and sets how many minor numbers (paritions) the device instance may have. All rested stuffs are handled by block layer code, most of the details can be found from block/{genhd, partition-generic}.c files. This patch re-writes multiple partitions support for bcache. It makes whole things to be more clear, and uses ida bit string in a more efficeint way. - Ida bit string only traces bcache device index, not minor number. For a bcache device with 128 partitions, only one bit in ida bit string is enough. - Device minor number and device index are separated in concept. Device index is used for /dev node naming, and ida bit string trace. Minor number is calculated from device index and only used to initialize first_minor of a bcache device. - It does not follow any standard for 16 partitions on a bcache device. This patch sets 128 partitions on single bcache device at max, this is the limitation from GPT (GUID Partition Table) and supported by fdisk. Considering a typical device minor number is 20 bits width, each bcache device may have 128 partitions (7 bits), there can be 8192 bcache devices existing on system. For most common deployment for a single server in now days, it should be enough. [minor spelling fixes in commit message by Michael Lyle] Signed-off-by: Coly Li <colyli@suse.de> Cc: Eric Wheeler <bcache@lists.ewheeler.net> Cc: Junhui Tang <tang.junhui@zte.com.cn> Reviewed-by: Michael Lyle <mlyle@lyle.org> Signed-off-by: Michael Lyle <mlyle@lyle.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-10-13 23:35:31 +00:00
int idx;
if (!d->stripe_size)
d->stripe_size = 1 << 31;
d->nr_stripes = DIV_ROUND_UP_ULL(sectors, d->stripe_size);
if (!d->nr_stripes || d->nr_stripes > max_stripes) {
pr_err("nr_stripes too large or invalid: %u (start sector beyond end of disk?)",
(unsigned int)d->nr_stripes);
return -ENOMEM;
}
n = d->nr_stripes * sizeof(atomic_t);
d->stripe_sectors_dirty = kvzalloc(n, GFP_KERNEL);
if (!d->stripe_sectors_dirty)
return -ENOMEM;
n = BITS_TO_LONGS(d->nr_stripes) * sizeof(unsigned long);
d->full_dirty_stripes = kvzalloc(n, GFP_KERNEL);
if (!d->full_dirty_stripes)
return -ENOMEM;
bcache: rewrite multiple partitions support Current partition support of bcache is confusing and buggy. It tries to trace non-continuous device minor numbers by an ida bit string, and mistakenly mixed bcache device index with minor numbers. This design generates several negative results, - Index of bcache device name is not consecutive under /dev/. If there are 3 bcache devices, they name will be, /dev/bcache0, /dev/bcache16, /dev/bcache32 Only bcache code indexes bcache device name is such an interesting way. - First minor number of each bcache device is traced by ida bit string. One bcache device will occupy 16 bits, this is not a good idea. Indeed only one bit is enough. - Because minor number and bcache device index are mixed, a device index is allocated by ida_simple_get(), but an first minor number is sent into ida_simple_remove() to release the device. It confused original author too. Root cause of the above errors is, bcache code should not handle device minor numbers at all! A standard process to support multiple partitions in Linux kernel is, - Device driver provides major device number, and indexes multiple device instances. - Device driver does not allocat nor trace device minor number, only provides a first minor number of a given device instance, and sets how many minor numbers (paritions) the device instance may have. All rested stuffs are handled by block layer code, most of the details can be found from block/{genhd, partition-generic}.c files. This patch re-writes multiple partitions support for bcache. It makes whole things to be more clear, and uses ida bit string in a more efficeint way. - Ida bit string only traces bcache device index, not minor number. For a bcache device with 128 partitions, only one bit in ida bit string is enough. - Device minor number and device index are separated in concept. Device index is used for /dev node naming, and ida bit string trace. Minor number is calculated from device index and only used to initialize first_minor of a bcache device. - It does not follow any standard for 16 partitions on a bcache device. This patch sets 128 partitions on single bcache device at max, this is the limitation from GPT (GUID Partition Table) and supported by fdisk. Considering a typical device minor number is 20 bits width, each bcache device may have 128 partitions (7 bits), there can be 8192 bcache devices existing on system. For most common deployment for a single server in now days, it should be enough. [minor spelling fixes in commit message by Michael Lyle] Signed-off-by: Coly Li <colyli@suse.de> Cc: Eric Wheeler <bcache@lists.ewheeler.net> Cc: Junhui Tang <tang.junhui@zte.com.cn> Reviewed-by: Michael Lyle <mlyle@lyle.org> Signed-off-by: Michael Lyle <mlyle@lyle.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-10-13 23:35:31 +00:00
idx = ida_simple_get(&bcache_device_idx, 0,
BCACHE_DEVICE_IDX_MAX, GFP_KERNEL);
if (idx < 0)
return idx;
if (bioset_init(&d->bio_split, 4, offsetof(struct bbio, bio),
BIOSET_NEED_BVECS|BIOSET_NEED_RESCUER))
goto err;
d->disk = alloc_disk(BCACHE_MINORS);
if (!d->disk)
goto err;
set_capacity(d->disk, sectors);
bcache: rewrite multiple partitions support Current partition support of bcache is confusing and buggy. It tries to trace non-continuous device minor numbers by an ida bit string, and mistakenly mixed bcache device index with minor numbers. This design generates several negative results, - Index of bcache device name is not consecutive under /dev/. If there are 3 bcache devices, they name will be, /dev/bcache0, /dev/bcache16, /dev/bcache32 Only bcache code indexes bcache device name is such an interesting way. - First minor number of each bcache device is traced by ida bit string. One bcache device will occupy 16 bits, this is not a good idea. Indeed only one bit is enough. - Because minor number and bcache device index are mixed, a device index is allocated by ida_simple_get(), but an first minor number is sent into ida_simple_remove() to release the device. It confused original author too. Root cause of the above errors is, bcache code should not handle device minor numbers at all! A standard process to support multiple partitions in Linux kernel is, - Device driver provides major device number, and indexes multiple device instances. - Device driver does not allocat nor trace device minor number, only provides a first minor number of a given device instance, and sets how many minor numbers (paritions) the device instance may have. All rested stuffs are handled by block layer code, most of the details can be found from block/{genhd, partition-generic}.c files. This patch re-writes multiple partitions support for bcache. It makes whole things to be more clear, and uses ida bit string in a more efficeint way. - Ida bit string only traces bcache device index, not minor number. For a bcache device with 128 partitions, only one bit in ida bit string is enough. - Device minor number and device index are separated in concept. Device index is used for /dev node naming, and ida bit string trace. Minor number is calculated from device index and only used to initialize first_minor of a bcache device. - It does not follow any standard for 16 partitions on a bcache device. This patch sets 128 partitions on single bcache device at max, this is the limitation from GPT (GUID Partition Table) and supported by fdisk. Considering a typical device minor number is 20 bits width, each bcache device may have 128 partitions (7 bits), there can be 8192 bcache devices existing on system. For most common deployment for a single server in now days, it should be enough. [minor spelling fixes in commit message by Michael Lyle] Signed-off-by: Coly Li <colyli@suse.de> Cc: Eric Wheeler <bcache@lists.ewheeler.net> Cc: Junhui Tang <tang.junhui@zte.com.cn> Reviewed-by: Michael Lyle <mlyle@lyle.org> Signed-off-by: Michael Lyle <mlyle@lyle.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-10-13 23:35:31 +00:00
snprintf(d->disk->disk_name, DISK_NAME_LEN, "bcache%i", idx);
d->disk->major = bcache_major;
bcache: rewrite multiple partitions support Current partition support of bcache is confusing and buggy. It tries to trace non-continuous device minor numbers by an ida bit string, and mistakenly mixed bcache device index with minor numbers. This design generates several negative results, - Index of bcache device name is not consecutive under /dev/. If there are 3 bcache devices, they name will be, /dev/bcache0, /dev/bcache16, /dev/bcache32 Only bcache code indexes bcache device name is such an interesting way. - First minor number of each bcache device is traced by ida bit string. One bcache device will occupy 16 bits, this is not a good idea. Indeed only one bit is enough. - Because minor number and bcache device index are mixed, a device index is allocated by ida_simple_get(), but an first minor number is sent into ida_simple_remove() to release the device. It confused original author too. Root cause of the above errors is, bcache code should not handle device minor numbers at all! A standard process to support multiple partitions in Linux kernel is, - Device driver provides major device number, and indexes multiple device instances. - Device driver does not allocat nor trace device minor number, only provides a first minor number of a given device instance, and sets how many minor numbers (paritions) the device instance may have. All rested stuffs are handled by block layer code, most of the details can be found from block/{genhd, partition-generic}.c files. This patch re-writes multiple partitions support for bcache. It makes whole things to be more clear, and uses ida bit string in a more efficeint way. - Ida bit string only traces bcache device index, not minor number. For a bcache device with 128 partitions, only one bit in ida bit string is enough. - Device minor number and device index are separated in concept. Device index is used for /dev node naming, and ida bit string trace. Minor number is calculated from device index and only used to initialize first_minor of a bcache device. - It does not follow any standard for 16 partitions on a bcache device. This patch sets 128 partitions on single bcache device at max, this is the limitation from GPT (GUID Partition Table) and supported by fdisk. Considering a typical device minor number is 20 bits width, each bcache device may have 128 partitions (7 bits), there can be 8192 bcache devices existing on system. For most common deployment for a single server in now days, it should be enough. [minor spelling fixes in commit message by Michael Lyle] Signed-off-by: Coly Li <colyli@suse.de> Cc: Eric Wheeler <bcache@lists.ewheeler.net> Cc: Junhui Tang <tang.junhui@zte.com.cn> Reviewed-by: Michael Lyle <mlyle@lyle.org> Signed-off-by: Michael Lyle <mlyle@lyle.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-10-13 23:35:31 +00:00
d->disk->first_minor = idx_to_first_minor(idx);
d->disk->fops = &bcache_ops;
d->disk->private_data = d;
q = blk_alloc_queue(GFP_KERNEL);
if (!q)
return -ENOMEM;
blk_queue_make_request(q, NULL);
d->disk->queue = q;
q->queuedata = d;
q->backing_dev_info->congested_data = d;
q->limits.max_hw_sectors = UINT_MAX;
q->limits.max_sectors = UINT_MAX;
q->limits.max_segment_size = UINT_MAX;
q->limits.max_segments = BIO_MAX_PAGES;
blk_queue_max_discard_sectors(q, UINT_MAX);
q->limits.discard_granularity = 512;
q->limits.io_min = block_size;
q->limits.logical_block_size = block_size;
q->limits.physical_block_size = block_size;
blk_queue_flag_set(QUEUE_FLAG_NONROT, d->disk->queue);
blk_queue_flag_clear(QUEUE_FLAG_ADD_RANDOM, d->disk->queue);
blk_queue_flag_set(QUEUE_FLAG_DISCARD, d->disk->queue);
blk_queue_write_cache(q, true, true);
return 0;
err:
ida_simple_remove(&bcache_device_idx, idx);
return -ENOMEM;
}
/* Cached device */
static void calc_cached_dev_sectors(struct cache_set *c)
{
uint64_t sectors = 0;
struct cached_dev *dc;
list_for_each_entry(dc, &c->cached_devs, list)
sectors += bdev_sectors(dc->bdev);
c->cached_dev_sectors = sectors;
}
bcache: stop bcache device when backing device is offline Currently bcache does not handle backing device failure, if backing device is offline and disconnected from system, its bcache device can still be accessible. If the bcache device is in writeback mode, I/O requests even can success if the requests hit on cache device. That is to say, when and how bcache handles offline backing device is undefined. This patch tries to handle backing device offline in a rather simple way, - Add cached_dev->status_update_thread kernel thread to update backing device status in every 1 second. - Add cached_dev->offline_seconds to record how many seconds the backing device is observed to be offline. If the backing device is offline for BACKING_DEV_OFFLINE_TIMEOUT (30) seconds, set dc->io_disable to 1 and call bcache_device_stop() to stop the bache device which linked to the offline backing device. Now if a backing device is offline for BACKING_DEV_OFFLINE_TIMEOUT seconds, its bcache device will be removed, then user space application writing on it will get error immediately, and handler the device failure in time. This patch is quite simple, does not handle more complicated situations. Once the bcache device is stopped, users need to recovery the backing device, register and attach it manually. Changelog: v3: call wait_for_kthread_stop() before exits kernel thread. v2: remove "bcache: " prefix when calling pr_warn(). v1: initial version. Signed-off-by: Coly Li <colyli@suse.de> Reviewed-by: Hannes Reinecke <hare@suse.com> Cc: Michael Lyle <mlyle@lyle.org> Cc: Junhui Tang <tang.junhui@zte.com.cn> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-05-28 07:37:41 +00:00
#define BACKING_DEV_OFFLINE_TIMEOUT 5
static int cached_dev_status_update(void *arg)
{
struct cached_dev *dc = arg;
struct request_queue *q;
/*
* If this delayed worker is stopping outside, directly quit here.
* dc->io_disable might be set via sysfs interface, so check it
* here too.
*/
while (!kthread_should_stop() && !dc->io_disable) {
q = bdev_get_queue(dc->bdev);
if (blk_queue_dying(q))
dc->offline_seconds++;
else
dc->offline_seconds = 0;
if (dc->offline_seconds >= BACKING_DEV_OFFLINE_TIMEOUT) {
pr_err("%s: device offline for %d seconds",
dc->backing_dev_name,
BACKING_DEV_OFFLINE_TIMEOUT);
pr_err("%s: disable I/O request due to backing "
"device offline", dc->disk.name);
dc->io_disable = true;
/* let others know earlier that io_disable is true */
smp_mb();
bcache_device_stop(&dc->disk);
break;
}
schedule_timeout_interruptible(HZ);
}
wait_for_kthread_stop();
return 0;
}
void bch_cached_dev_run(struct cached_dev *dc)
{
struct bcache_device *d = &dc->disk;
char buf[SB_LABEL_SIZE + 1];
char *env[] = {
"DRIVER=bcache",
kasprintf(GFP_KERNEL, "CACHED_UUID=%pU", dc->sb.uuid),
NULL,
NULL,
};
memcpy(buf, dc->sb.label, SB_LABEL_SIZE);
buf[SB_LABEL_SIZE] = '\0';
env[2] = kasprintf(GFP_KERNEL, "CACHED_LABEL=%s", buf);
if (atomic_xchg(&dc->running, 1)) {
kfree(env[1]);
kfree(env[2]);
return;
}
if (!d->c &&
BDEV_STATE(&dc->sb) != BDEV_STATE_NONE) {
struct closure cl;
closure_init_stack(&cl);
SET_BDEV_STATE(&dc->sb, BDEV_STATE_STALE);
bch_write_bdev_super(dc, &cl);
closure_sync(&cl);
}
add_disk(d->disk);
bd_link_disk_holder(dc->bdev, dc->disk.disk);
/*
* won't show up in the uevent file, use udevadm monitor -e instead
* only class / kset properties are persistent
*/
kobject_uevent_env(&disk_to_dev(d->disk)->kobj, KOBJ_CHANGE, env);
kfree(env[1]);
kfree(env[2]);
if (sysfs_create_link(&d->kobj, &disk_to_dev(d->disk)->kobj, "dev") ||
sysfs_create_link(&disk_to_dev(d->disk)->kobj, &d->kobj, "bcache"))
pr_debug("error creating sysfs link");
bcache: stop bcache device when backing device is offline Currently bcache does not handle backing device failure, if backing device is offline and disconnected from system, its bcache device can still be accessible. If the bcache device is in writeback mode, I/O requests even can success if the requests hit on cache device. That is to say, when and how bcache handles offline backing device is undefined. This patch tries to handle backing device offline in a rather simple way, - Add cached_dev->status_update_thread kernel thread to update backing device status in every 1 second. - Add cached_dev->offline_seconds to record how many seconds the backing device is observed to be offline. If the backing device is offline for BACKING_DEV_OFFLINE_TIMEOUT (30) seconds, set dc->io_disable to 1 and call bcache_device_stop() to stop the bache device which linked to the offline backing device. Now if a backing device is offline for BACKING_DEV_OFFLINE_TIMEOUT seconds, its bcache device will be removed, then user space application writing on it will get error immediately, and handler the device failure in time. This patch is quite simple, does not handle more complicated situations. Once the bcache device is stopped, users need to recovery the backing device, register and attach it manually. Changelog: v3: call wait_for_kthread_stop() before exits kernel thread. v2: remove "bcache: " prefix when calling pr_warn(). v1: initial version. Signed-off-by: Coly Li <colyli@suse.de> Reviewed-by: Hannes Reinecke <hare@suse.com> Cc: Michael Lyle <mlyle@lyle.org> Cc: Junhui Tang <tang.junhui@zte.com.cn> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-05-28 07:37:41 +00:00
dc->status_update_thread = kthread_run(cached_dev_status_update,
dc, "bcache_status_update");
if (IS_ERR(dc->status_update_thread)) {
pr_warn("failed to create bcache_status_update kthread, "
"continue to run without monitoring backing "
"device status");
}
}
bcache: stop dc->writeback_rate_update properly struct delayed_work writeback_rate_update in struct cache_dev is a delayed worker to call function update_writeback_rate() in period (the interval is defined by dc->writeback_rate_update_seconds). When a metadate I/O error happens on cache device, bcache error handling routine bch_cache_set_error() will call bch_cache_set_unregister() to retire whole cache set. On the unregister code path, this delayed work is stopped by calling cancel_delayed_work_sync(&dc->writeback_rate_update). dc->writeback_rate_update is a special delayed work from others in bcache. In its routine update_writeback_rate(), this delayed work is re-armed itself. That means when cancel_delayed_work_sync() returns, this delayed work can still be executed after several seconds defined by dc->writeback_rate_update_seconds. The problem is, after cancel_delayed_work_sync() returns, the cache set unregister code path will continue and release memory of struct cache set. Then the delayed work is scheduled to run, __update_writeback_rate() will reference the already released cache_set memory, and trigger a NULL pointer deference fault. This patch introduces two more bcache device flags, - BCACHE_DEV_WB_RUNNING bit set: bcache device is in writeback mode and running, it is OK for dc->writeback_rate_update to re-arm itself. bit clear:bcache device is trying to stop dc->writeback_rate_update, this delayed work should not re-arm itself and quit. - BCACHE_DEV_RATE_DW_RUNNING bit set: routine update_writeback_rate() is executing. bit clear: routine update_writeback_rate() quits. This patch also adds a function cancel_writeback_rate_update_dwork() to wait for dc->writeback_rate_update quits before cancel it by calling cancel_delayed_work_sync(). In order to avoid a deadlock by unexpected quit dc->writeback_rate_update, after time_out seconds this function will give up and continue to call cancel_delayed_work_sync(). And here I explain how this patch stops self re-armed delayed work properly with the above stuffs. update_writeback_rate() sets BCACHE_DEV_RATE_DW_RUNNING at its beginning and clears BCACHE_DEV_RATE_DW_RUNNING at its end. Before calling cancel_writeback_rate_update_dwork() clear flag BCACHE_DEV_WB_RUNNING. Before calling cancel_delayed_work_sync() wait utill flag BCACHE_DEV_RATE_DW_RUNNING is clear. So when calling cancel_delayed_work_sync(), dc->writeback_rate_update must be already re- armed, or quite by seeing BCACHE_DEV_WB_RUNNING cleared. In both cases delayed work routine update_writeback_rate() won't be executed after cancel_delayed_work_sync() returns. Inside update_writeback_rate() before calling schedule_delayed_work(), flag BCACHE_DEV_WB_RUNNING is checked before. If this flag is cleared, it means someone is about to stop the delayed work. Because flag BCACHE_DEV_RATE_DW_RUNNING is set already and cancel_delayed_work_sync() has to wait for this flag to be cleared, we don't need to worry about race condition here. If update_writeback_rate() is scheduled to run after checking BCACHE_DEV_RATE_DW_RUNNING and before calling cancel_delayed_work_sync() in cancel_writeback_rate_update_dwork(), it is also safe. Because at this moment BCACHE_DEV_WB_RUNNING is cleared with memory barrier. As I mentioned previously, update_writeback_rate() will see BCACHE_DEV_WB_RUNNING is clear and quit immediately. Because there are more dependences inside update_writeback_rate() to struct cache_set memory, dc->writeback_rate_update is not a simple self re-arm delayed work. After trying many different methods (e.g. hold dc->count, or use locks), this is the only way I can find which works to properly stop dc->writeback_rate_update delayed work. Changelog: v3: change values of BCACHE_DEV_WB_RUNNING and BCACHE_DEV_RATE_DW_RUNNING to bit index, for test_bit(). v2: Try to fix the race issue which is pointed out by Junhui. v1: The initial version for review Signed-off-by: Coly Li <colyli@suse.de> Reviewed-by: Junhui Tang <tang.junhui@zte.com.cn> Reviewed-by: Michael Lyle <mlyle@lyle.org> Cc: Michael Lyle <mlyle@lyle.org> Cc: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-03-19 00:36:16 +00:00
/*
* If BCACHE_DEV_RATE_DW_RUNNING is set, it means routine of the delayed
* work dc->writeback_rate_update is running. Wait until the routine
* quits (BCACHE_DEV_RATE_DW_RUNNING is clear), then continue to
* cancel it. If BCACHE_DEV_RATE_DW_RUNNING is not clear after time_out
* seconds, give up waiting here and continue to cancel it too.
*/
static void cancel_writeback_rate_update_dwork(struct cached_dev *dc)
{
int time_out = WRITEBACK_RATE_UPDATE_SECS_MAX * HZ;
do {
if (!test_bit(BCACHE_DEV_RATE_DW_RUNNING,
&dc->disk.flags))
break;
time_out--;
schedule_timeout_interruptible(1);
} while (time_out > 0);
if (time_out == 0)
pr_warn("give up waiting for dc->writeback_write_update to quit");
cancel_delayed_work_sync(&dc->writeback_rate_update);
}
static void cached_dev_detach_finish(struct work_struct *w)
{
struct cached_dev *dc = container_of(w, struct cached_dev, detach);
struct closure cl;
closure_init_stack(&cl);
BUG_ON(!test_bit(BCACHE_DEV_DETACHING, &dc->disk.flags));
BUG_ON(refcount_read(&dc->count));
mutex_lock(&bch_register_lock);
bcache: stop dc->writeback_rate_update properly struct delayed_work writeback_rate_update in struct cache_dev is a delayed worker to call function update_writeback_rate() in period (the interval is defined by dc->writeback_rate_update_seconds). When a metadate I/O error happens on cache device, bcache error handling routine bch_cache_set_error() will call bch_cache_set_unregister() to retire whole cache set. On the unregister code path, this delayed work is stopped by calling cancel_delayed_work_sync(&dc->writeback_rate_update). dc->writeback_rate_update is a special delayed work from others in bcache. In its routine update_writeback_rate(), this delayed work is re-armed itself. That means when cancel_delayed_work_sync() returns, this delayed work can still be executed after several seconds defined by dc->writeback_rate_update_seconds. The problem is, after cancel_delayed_work_sync() returns, the cache set unregister code path will continue and release memory of struct cache set. Then the delayed work is scheduled to run, __update_writeback_rate() will reference the already released cache_set memory, and trigger a NULL pointer deference fault. This patch introduces two more bcache device flags, - BCACHE_DEV_WB_RUNNING bit set: bcache device is in writeback mode and running, it is OK for dc->writeback_rate_update to re-arm itself. bit clear:bcache device is trying to stop dc->writeback_rate_update, this delayed work should not re-arm itself and quit. - BCACHE_DEV_RATE_DW_RUNNING bit set: routine update_writeback_rate() is executing. bit clear: routine update_writeback_rate() quits. This patch also adds a function cancel_writeback_rate_update_dwork() to wait for dc->writeback_rate_update quits before cancel it by calling cancel_delayed_work_sync(). In order to avoid a deadlock by unexpected quit dc->writeback_rate_update, after time_out seconds this function will give up and continue to call cancel_delayed_work_sync(). And here I explain how this patch stops self re-armed delayed work properly with the above stuffs. update_writeback_rate() sets BCACHE_DEV_RATE_DW_RUNNING at its beginning and clears BCACHE_DEV_RATE_DW_RUNNING at its end. Before calling cancel_writeback_rate_update_dwork() clear flag BCACHE_DEV_WB_RUNNING. Before calling cancel_delayed_work_sync() wait utill flag BCACHE_DEV_RATE_DW_RUNNING is clear. So when calling cancel_delayed_work_sync(), dc->writeback_rate_update must be already re- armed, or quite by seeing BCACHE_DEV_WB_RUNNING cleared. In both cases delayed work routine update_writeback_rate() won't be executed after cancel_delayed_work_sync() returns. Inside update_writeback_rate() before calling schedule_delayed_work(), flag BCACHE_DEV_WB_RUNNING is checked before. If this flag is cleared, it means someone is about to stop the delayed work. Because flag BCACHE_DEV_RATE_DW_RUNNING is set already and cancel_delayed_work_sync() has to wait for this flag to be cleared, we don't need to worry about race condition here. If update_writeback_rate() is scheduled to run after checking BCACHE_DEV_RATE_DW_RUNNING and before calling cancel_delayed_work_sync() in cancel_writeback_rate_update_dwork(), it is also safe. Because at this moment BCACHE_DEV_WB_RUNNING is cleared with memory barrier. As I mentioned previously, update_writeback_rate() will see BCACHE_DEV_WB_RUNNING is clear and quit immediately. Because there are more dependences inside update_writeback_rate() to struct cache_set memory, dc->writeback_rate_update is not a simple self re-arm delayed work. After trying many different methods (e.g. hold dc->count, or use locks), this is the only way I can find which works to properly stop dc->writeback_rate_update delayed work. Changelog: v3: change values of BCACHE_DEV_WB_RUNNING and BCACHE_DEV_RATE_DW_RUNNING to bit index, for test_bit(). v2: Try to fix the race issue which is pointed out by Junhui. v1: The initial version for review Signed-off-by: Coly Li <colyli@suse.de> Reviewed-by: Junhui Tang <tang.junhui@zte.com.cn> Reviewed-by: Michael Lyle <mlyle@lyle.org> Cc: Michael Lyle <mlyle@lyle.org> Cc: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-03-19 00:36:16 +00:00
if (test_and_clear_bit(BCACHE_DEV_WB_RUNNING, &dc->disk.flags))
cancel_writeback_rate_update_dwork(dc);
if (!IS_ERR_OR_NULL(dc->writeback_thread)) {
kthread_stop(dc->writeback_thread);
dc->writeback_thread = NULL;
}
memset(&dc->sb.set_uuid, 0, 16);
SET_BDEV_STATE(&dc->sb, BDEV_STATE_NONE);
bch_write_bdev_super(dc, &cl);
closure_sync(&cl);
calc_cached_dev_sectors(dc->disk.c);
bcache_device_detach(&dc->disk);
list_move(&dc->list, &uncached_devices);
clear_bit(BCACHE_DEV_DETACHING, &dc->disk.flags);
clear_bit(BCACHE_DEV_UNLINK_DONE, &dc->disk.flags);
mutex_unlock(&bch_register_lock);
pr_info("Caching disabled for %s", dc->backing_dev_name);
/* Drop ref we took in cached_dev_detach() */
closure_put(&dc->disk.cl);
}
void bch_cached_dev_detach(struct cached_dev *dc)
{
lockdep_assert_held(&bch_register_lock);
if (test_bit(BCACHE_DEV_CLOSING, &dc->disk.flags))
return;
if (test_and_set_bit(BCACHE_DEV_DETACHING, &dc->disk.flags))
return;
/*
* Block the device from being closed and freed until we're finished
* detaching
*/
closure_get(&dc->disk.cl);
bch_writeback_queue(dc);
bcache: stop dc->writeback_rate_update properly struct delayed_work writeback_rate_update in struct cache_dev is a delayed worker to call function update_writeback_rate() in period (the interval is defined by dc->writeback_rate_update_seconds). When a metadate I/O error happens on cache device, bcache error handling routine bch_cache_set_error() will call bch_cache_set_unregister() to retire whole cache set. On the unregister code path, this delayed work is stopped by calling cancel_delayed_work_sync(&dc->writeback_rate_update). dc->writeback_rate_update is a special delayed work from others in bcache. In its routine update_writeback_rate(), this delayed work is re-armed itself. That means when cancel_delayed_work_sync() returns, this delayed work can still be executed after several seconds defined by dc->writeback_rate_update_seconds. The problem is, after cancel_delayed_work_sync() returns, the cache set unregister code path will continue and release memory of struct cache set. Then the delayed work is scheduled to run, __update_writeback_rate() will reference the already released cache_set memory, and trigger a NULL pointer deference fault. This patch introduces two more bcache device flags, - BCACHE_DEV_WB_RUNNING bit set: bcache device is in writeback mode and running, it is OK for dc->writeback_rate_update to re-arm itself. bit clear:bcache device is trying to stop dc->writeback_rate_update, this delayed work should not re-arm itself and quit. - BCACHE_DEV_RATE_DW_RUNNING bit set: routine update_writeback_rate() is executing. bit clear: routine update_writeback_rate() quits. This patch also adds a function cancel_writeback_rate_update_dwork() to wait for dc->writeback_rate_update quits before cancel it by calling cancel_delayed_work_sync(). In order to avoid a deadlock by unexpected quit dc->writeback_rate_update, after time_out seconds this function will give up and continue to call cancel_delayed_work_sync(). And here I explain how this patch stops self re-armed delayed work properly with the above stuffs. update_writeback_rate() sets BCACHE_DEV_RATE_DW_RUNNING at its beginning and clears BCACHE_DEV_RATE_DW_RUNNING at its end. Before calling cancel_writeback_rate_update_dwork() clear flag BCACHE_DEV_WB_RUNNING. Before calling cancel_delayed_work_sync() wait utill flag BCACHE_DEV_RATE_DW_RUNNING is clear. So when calling cancel_delayed_work_sync(), dc->writeback_rate_update must be already re- armed, or quite by seeing BCACHE_DEV_WB_RUNNING cleared. In both cases delayed work routine update_writeback_rate() won't be executed after cancel_delayed_work_sync() returns. Inside update_writeback_rate() before calling schedule_delayed_work(), flag BCACHE_DEV_WB_RUNNING is checked before. If this flag is cleared, it means someone is about to stop the delayed work. Because flag BCACHE_DEV_RATE_DW_RUNNING is set already and cancel_delayed_work_sync() has to wait for this flag to be cleared, we don't need to worry about race condition here. If update_writeback_rate() is scheduled to run after checking BCACHE_DEV_RATE_DW_RUNNING and before calling cancel_delayed_work_sync() in cancel_writeback_rate_update_dwork(), it is also safe. Because at this moment BCACHE_DEV_WB_RUNNING is cleared with memory barrier. As I mentioned previously, update_writeback_rate() will see BCACHE_DEV_WB_RUNNING is clear and quit immediately. Because there are more dependences inside update_writeback_rate() to struct cache_set memory, dc->writeback_rate_update is not a simple self re-arm delayed work. After trying many different methods (e.g. hold dc->count, or use locks), this is the only way I can find which works to properly stop dc->writeback_rate_update delayed work. Changelog: v3: change values of BCACHE_DEV_WB_RUNNING and BCACHE_DEV_RATE_DW_RUNNING to bit index, for test_bit(). v2: Try to fix the race issue which is pointed out by Junhui. v1: The initial version for review Signed-off-by: Coly Li <colyli@suse.de> Reviewed-by: Junhui Tang <tang.junhui@zte.com.cn> Reviewed-by: Michael Lyle <mlyle@lyle.org> Cc: Michael Lyle <mlyle@lyle.org> Cc: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-03-19 00:36:16 +00:00
cached_dev_put(dc);
}
bcache: fix for data collapse after re-attaching an attached device back-end device sdm has already attached a cache_set with ID f67ebe1f-f8bc-4d73-bfe5-9dc88607f119, then try to attach with another cache set, and it returns with an error: [root]# cd /sys/block/sdm/bcache [root]# echo 5ccd0a63-148e-48b8-afa2-aca9cbd6279f > attach -bash: echo: write error: Invalid argument After that, execute a command to modify the label of bcache device: [root]# echo data_disk1 > label Then we reboot the system, when the system power on, the back-end device can not attach to cache_set, a messages show in the log: Feb 5 12:05:52 ceph152 kernel: [922385.508498] bcache: bch_cached_dev_attach() couldn't find uuid for sdm in set In sysfs_attach(), dc->sb.set_uuid was assigned to the value which input through sysfs, no matter whether it is success or not in bch_cached_dev_attach(). For example, If the back-end device has already attached to an cache set, bch_cached_dev_attach() would fail, but dc->sb.set_uuid was changed. Then modify the label of bcache device, it will call bch_write_bdev_super(), which would write the dc->sb.set_uuid to the super block, so we record a wrong cache set ID in the super block, after the system reboot, the cache set couldn't find the uuid of the back-end device, so the bcache device couldn't exist and use any more. In this patch, we don't assigned cache set ID to dc->sb.set_uuid in sysfs_attach() directly, but input it into bch_cached_dev_attach(), and assigned dc->sb.set_uuid to the cache set ID after the back-end device attached to the cache set successful. Signed-off-by: Tang Junhui <tang.junhui@zte.com.cn> Reviewed-by: Michael Lyle <mlyle@lyle.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-02-07 19:41:46 +00:00
int bch_cached_dev_attach(struct cached_dev *dc, struct cache_set *c,
uint8_t *set_uuid)
{
uint32_t rtime = cpu_to_le32((u32)ktime_get_real_seconds());
struct uuid_entry *u;
struct cached_dev *exist_dc, *t;
bcache: fix for data collapse after re-attaching an attached device back-end device sdm has already attached a cache_set with ID f67ebe1f-f8bc-4d73-bfe5-9dc88607f119, then try to attach with another cache set, and it returns with an error: [root]# cd /sys/block/sdm/bcache [root]# echo 5ccd0a63-148e-48b8-afa2-aca9cbd6279f > attach -bash: echo: write error: Invalid argument After that, execute a command to modify the label of bcache device: [root]# echo data_disk1 > label Then we reboot the system, when the system power on, the back-end device can not attach to cache_set, a messages show in the log: Feb 5 12:05:52 ceph152 kernel: [922385.508498] bcache: bch_cached_dev_attach() couldn't find uuid for sdm in set In sysfs_attach(), dc->sb.set_uuid was assigned to the value which input through sysfs, no matter whether it is success or not in bch_cached_dev_attach(). For example, If the back-end device has already attached to an cache set, bch_cached_dev_attach() would fail, but dc->sb.set_uuid was changed. Then modify the label of bcache device, it will call bch_write_bdev_super(), which would write the dc->sb.set_uuid to the super block, so we record a wrong cache set ID in the super block, after the system reboot, the cache set couldn't find the uuid of the back-end device, so the bcache device couldn't exist and use any more. In this patch, we don't assigned cache set ID to dc->sb.set_uuid in sysfs_attach() directly, but input it into bch_cached_dev_attach(), and assigned dc->sb.set_uuid to the cache set ID after the back-end device attached to the cache set successful. Signed-off-by: Tang Junhui <tang.junhui@zte.com.cn> Reviewed-by: Michael Lyle <mlyle@lyle.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-02-07 19:41:46 +00:00
if ((set_uuid && memcmp(set_uuid, c->sb.set_uuid, 16)) ||
(!set_uuid && memcmp(dc->sb.set_uuid, c->sb.set_uuid, 16)))
return -ENOENT;
if (dc->disk.c) {
pr_err("Can't attach %s: already attached",
dc->backing_dev_name);
return -EINVAL;
}
if (test_bit(CACHE_SET_STOPPING, &c->flags)) {
pr_err("Can't attach %s: shutting down",
dc->backing_dev_name);
return -EINVAL;
}
if (dc->sb.block_size < c->sb.block_size) {
/* Will die */
pr_err("Couldn't attach %s: block size less than set's block size",
dc->backing_dev_name);
return -EINVAL;
}
/* Check whether already attached */
list_for_each_entry_safe(exist_dc, t, &c->cached_devs, list) {
if (!memcmp(dc->sb.uuid, exist_dc->sb.uuid, 16)) {
pr_err("Tried to attach %s but duplicate UUID already attached",
dc->backing_dev_name);
return -EINVAL;
}
}
u = uuid_find(c, dc->sb.uuid);
if (u &&
(BDEV_STATE(&dc->sb) == BDEV_STATE_STALE ||
BDEV_STATE(&dc->sb) == BDEV_STATE_NONE)) {
memcpy(u->uuid, invalid_uuid, 16);
u->invalidated = cpu_to_le32((u32)ktime_get_real_seconds());
u = NULL;
}
if (!u) {
if (BDEV_STATE(&dc->sb) == BDEV_STATE_DIRTY) {
pr_err("Couldn't find uuid for %s in set",
dc->backing_dev_name);
return -ENOENT;
}
u = uuid_find_empty(c);
if (!u) {
pr_err("Not caching %s, no room for UUID",
dc->backing_dev_name);
return -EINVAL;
}
}
/*
* Deadlocks since we're called via sysfs...
* sysfs_remove_file(&dc->kobj, &sysfs_attach);
*/
if (bch_is_zero(u->uuid, 16)) {
struct closure cl;
closure_init_stack(&cl);
memcpy(u->uuid, dc->sb.uuid, 16);
memcpy(u->label, dc->sb.label, SB_LABEL_SIZE);
u->first_reg = u->last_reg = rtime;
bch_uuid_write(c);
memcpy(dc->sb.set_uuid, c->sb.set_uuid, 16);
SET_BDEV_STATE(&dc->sb, BDEV_STATE_CLEAN);
bch_write_bdev_super(dc, &cl);
closure_sync(&cl);
} else {
u->last_reg = rtime;
bch_uuid_write(c);
}
bcache_device_attach(&dc->disk, c, u - c->uuids);
list_move(&dc->list, &c->cached_devs);
calc_cached_dev_sectors(c);
/*
* dc->c must be set before dc->count != 0 - paired with the mb in
* cached_dev_get()
*/
smp_wmb();
refcount_set(&dc->count, 1);
/* Block writeback thread, but spawn it */
down_write(&dc->writeback_lock);
if (bch_cached_dev_writeback_start(dc)) {
up_write(&dc->writeback_lock);
return -ENOMEM;
}
if (BDEV_STATE(&dc->sb) == BDEV_STATE_DIRTY) {
atomic_set(&dc->has_dirty, 1);
bch_writeback_queue(dc);
}
bch_sectors_dirty_init(&dc->disk);
bch_cached_dev_run(dc);
bcache_device_link(&dc->disk, c, "bdev");
bcache: set max writeback rate when I/O request is idle Commit b1092c9af9ed ("bcache: allow quick writeback when backing idle") allows the writeback rate to be faster if there is no I/O request on a bcache device. It works well if there is only one bcache device attached to the cache set. If there are many bcache devices attached to a cache set, it may introduce performance regression because multiple faster writeback threads of the idle bcache devices will compete the btree level locks with the bcache device who have I/O requests coming. This patch fixes the above issue by only permitting fast writebac when all bcache devices attached on the cache set are idle. And if one of the bcache devices has new I/O request coming, minimized all writeback throughput immediately and let PI controller __update_writeback_rate() to decide the upcoming writeback rate for each bcache device. Also when all bcache devices are idle, limited wrieback rate to a small number is wast of thoughput, especially when backing devices are slower non-rotation devices (e.g. SATA SSD). This patch sets a max writeback rate for each backing device if the whole cache set is idle. A faster writeback rate in idle time means new I/Os may have more available space for dirty data, and people may observe a better write performance then. Please note bcache may change its cache mode in run time, and this patch still works if the cache mode is switched from writeback mode and there is still dirty data on cache. Fixes: Commit b1092c9af9ed ("bcache: allow quick writeback when backing idle") Cc: stable@vger.kernel.org #4.16+ Signed-off-by: Coly Li <colyli@suse.de> Tested-by: Kai Krakow <kai@kaishome.de> Tested-by: Stefan Priebe <s.priebe@profihost.ag> Cc: Michael Lyle <mlyle@lyle.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-08-09 07:48:49 +00:00
atomic_inc(&c->attached_dev_nr);
/* Allow the writeback thread to proceed */
up_write(&dc->writeback_lock);
pr_info("Caching %s as %s on set %pU",
dc->backing_dev_name,
dc->disk.disk->disk_name,
dc->disk.c->sb.set_uuid);
return 0;
}
void bch_cached_dev_release(struct kobject *kobj)
{
struct cached_dev *dc = container_of(kobj, struct cached_dev,
disk.kobj);
kfree(dc);
module_put(THIS_MODULE);
}
static void cached_dev_free(struct closure *cl)
{
struct cached_dev *dc = container_of(cl, struct cached_dev, disk.cl);
bcache: stop dc->writeback_rate_update properly struct delayed_work writeback_rate_update in struct cache_dev is a delayed worker to call function update_writeback_rate() in period (the interval is defined by dc->writeback_rate_update_seconds). When a metadate I/O error happens on cache device, bcache error handling routine bch_cache_set_error() will call bch_cache_set_unregister() to retire whole cache set. On the unregister code path, this delayed work is stopped by calling cancel_delayed_work_sync(&dc->writeback_rate_update). dc->writeback_rate_update is a special delayed work from others in bcache. In its routine update_writeback_rate(), this delayed work is re-armed itself. That means when cancel_delayed_work_sync() returns, this delayed work can still be executed after several seconds defined by dc->writeback_rate_update_seconds. The problem is, after cancel_delayed_work_sync() returns, the cache set unregister code path will continue and release memory of struct cache set. Then the delayed work is scheduled to run, __update_writeback_rate() will reference the already released cache_set memory, and trigger a NULL pointer deference fault. This patch introduces two more bcache device flags, - BCACHE_DEV_WB_RUNNING bit set: bcache device is in writeback mode and running, it is OK for dc->writeback_rate_update to re-arm itself. bit clear:bcache device is trying to stop dc->writeback_rate_update, this delayed work should not re-arm itself and quit. - BCACHE_DEV_RATE_DW_RUNNING bit set: routine update_writeback_rate() is executing. bit clear: routine update_writeback_rate() quits. This patch also adds a function cancel_writeback_rate_update_dwork() to wait for dc->writeback_rate_update quits before cancel it by calling cancel_delayed_work_sync(). In order to avoid a deadlock by unexpected quit dc->writeback_rate_update, after time_out seconds this function will give up and continue to call cancel_delayed_work_sync(). And here I explain how this patch stops self re-armed delayed work properly with the above stuffs. update_writeback_rate() sets BCACHE_DEV_RATE_DW_RUNNING at its beginning and clears BCACHE_DEV_RATE_DW_RUNNING at its end. Before calling cancel_writeback_rate_update_dwork() clear flag BCACHE_DEV_WB_RUNNING. Before calling cancel_delayed_work_sync() wait utill flag BCACHE_DEV_RATE_DW_RUNNING is clear. So when calling cancel_delayed_work_sync(), dc->writeback_rate_update must be already re- armed, or quite by seeing BCACHE_DEV_WB_RUNNING cleared. In both cases delayed work routine update_writeback_rate() won't be executed after cancel_delayed_work_sync() returns. Inside update_writeback_rate() before calling schedule_delayed_work(), flag BCACHE_DEV_WB_RUNNING is checked before. If this flag is cleared, it means someone is about to stop the delayed work. Because flag BCACHE_DEV_RATE_DW_RUNNING is set already and cancel_delayed_work_sync() has to wait for this flag to be cleared, we don't need to worry about race condition here. If update_writeback_rate() is scheduled to run after checking BCACHE_DEV_RATE_DW_RUNNING and before calling cancel_delayed_work_sync() in cancel_writeback_rate_update_dwork(), it is also safe. Because at this moment BCACHE_DEV_WB_RUNNING is cleared with memory barrier. As I mentioned previously, update_writeback_rate() will see BCACHE_DEV_WB_RUNNING is clear and quit immediately. Because there are more dependences inside update_writeback_rate() to struct cache_set memory, dc->writeback_rate_update is not a simple self re-arm delayed work. After trying many different methods (e.g. hold dc->count, or use locks), this is the only way I can find which works to properly stop dc->writeback_rate_update delayed work. Changelog: v3: change values of BCACHE_DEV_WB_RUNNING and BCACHE_DEV_RATE_DW_RUNNING to bit index, for test_bit(). v2: Try to fix the race issue which is pointed out by Junhui. v1: The initial version for review Signed-off-by: Coly Li <colyli@suse.de> Reviewed-by: Junhui Tang <tang.junhui@zte.com.cn> Reviewed-by: Michael Lyle <mlyle@lyle.org> Cc: Michael Lyle <mlyle@lyle.org> Cc: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-03-19 00:36:16 +00:00
mutex_lock(&bch_register_lock);
if (test_and_clear_bit(BCACHE_DEV_WB_RUNNING, &dc->disk.flags))
cancel_writeback_rate_update_dwork(dc);
if (!IS_ERR_OR_NULL(dc->writeback_thread))
kthread_stop(dc->writeback_thread);
if (dc->writeback_write_wq)
destroy_workqueue(dc->writeback_write_wq);
bcache: stop bcache device when backing device is offline Currently bcache does not handle backing device failure, if backing device is offline and disconnected from system, its bcache device can still be accessible. If the bcache device is in writeback mode, I/O requests even can success if the requests hit on cache device. That is to say, when and how bcache handles offline backing device is undefined. This patch tries to handle backing device offline in a rather simple way, - Add cached_dev->status_update_thread kernel thread to update backing device status in every 1 second. - Add cached_dev->offline_seconds to record how many seconds the backing device is observed to be offline. If the backing device is offline for BACKING_DEV_OFFLINE_TIMEOUT (30) seconds, set dc->io_disable to 1 and call bcache_device_stop() to stop the bache device which linked to the offline backing device. Now if a backing device is offline for BACKING_DEV_OFFLINE_TIMEOUT seconds, its bcache device will be removed, then user space application writing on it will get error immediately, and handler the device failure in time. This patch is quite simple, does not handle more complicated situations. Once the bcache device is stopped, users need to recovery the backing device, register and attach it manually. Changelog: v3: call wait_for_kthread_stop() before exits kernel thread. v2: remove "bcache: " prefix when calling pr_warn(). v1: initial version. Signed-off-by: Coly Li <colyli@suse.de> Reviewed-by: Hannes Reinecke <hare@suse.com> Cc: Michael Lyle <mlyle@lyle.org> Cc: Junhui Tang <tang.junhui@zte.com.cn> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-05-28 07:37:41 +00:00
if (!IS_ERR_OR_NULL(dc->status_update_thread))
kthread_stop(dc->status_update_thread);
if (atomic_read(&dc->running))
bd_unlink_disk_holder(dc->bdev, dc->disk.disk);
bcache_device_free(&dc->disk);
list_del(&dc->list);
mutex_unlock(&bch_register_lock);
if (!IS_ERR_OR_NULL(dc->bdev))
blkdev_put(dc->bdev, FMODE_READ|FMODE_WRITE|FMODE_EXCL);
wake_up(&unregister_wait);
kobject_put(&dc->disk.kobj);
}
static void cached_dev_flush(struct closure *cl)
{
struct cached_dev *dc = container_of(cl, struct cached_dev, disk.cl);
struct bcache_device *d = &dc->disk;
mutex_lock(&bch_register_lock);
bcache_device_unlink(d);
mutex_unlock(&bch_register_lock);
bch_cache_accounting_destroy(&dc->accounting);
kobject_del(&d->kobj);
continue_at(cl, cached_dev_free, system_wq);
}
static int cached_dev_init(struct cached_dev *dc, unsigned int block_size)
{
int ret;
struct io *io;
struct request_queue *q = bdev_get_queue(dc->bdev);
__module_get(THIS_MODULE);
INIT_LIST_HEAD(&dc->list);
closure_init(&dc->disk.cl, NULL);
set_closure_fn(&dc->disk.cl, cached_dev_flush, system_wq);
kobject_init(&dc->disk.kobj, &bch_cached_dev_ktype);
INIT_WORK(&dc->detach, cached_dev_detach_finish);
sema_init(&dc->sb_write_mutex, 1);
INIT_LIST_HEAD(&dc->io_lru);
spin_lock_init(&dc->io_lock);
bch_cache_accounting_init(&dc->accounting, &dc->disk.cl);
dc->sequential_cutoff = 4 << 20;
for (io = dc->io; io < dc->io + RECENT_IO; io++) {
list_add(&io->lru, &dc->io_lru);
hlist_add_head(&io->hash, dc->io_hash + RECENT_IO);
}
dc->disk.stripe_size = q->limits.io_opt >> 9;
if (dc->disk.stripe_size)
dc->partial_stripes_expensive =
q->limits.raid_partial_stripes_expensive;
ret = bcache_device_init(&dc->disk, block_size,
dc->bdev->bd_part->nr_sects - dc->sb.data_offset);
if (ret)
return ret;
dc->disk.disk->queue->backing_dev_info->ra_pages =
max(dc->disk.disk->queue->backing_dev_info->ra_pages,
q->backing_dev_info->ra_pages);
bcache: add io_disable to struct cached_dev If a bcache device is configured to writeback mode, current code does not handle write I/O errors on backing devices properly. In writeback mode, write request is written to cache device, and latter being flushed to backing device. If I/O failed when writing from cache device to the backing device, bcache code just ignores the error and upper layer code is NOT noticed that the backing device is broken. This patch tries to handle backing device failure like how the cache device failure is handled, - Add a error counter 'io_errors' and error limit 'error_limit' in struct cached_dev. Add another io_disable to struct cached_dev to disable I/Os on the problematic backing device. - When I/O error happens on backing device, increase io_errors counter. And if io_errors reaches error_limit, set cache_dev->io_disable to true, and stop the bcache device. The result is, if backing device is broken of disconnected, and I/O errors reach its error limit, backing device will be disabled and the associated bcache device will be removed from system. Changelog: v2: remove "bcache: " prefix in pr_error(), and use correct name string to print out bcache device gendisk name. v1: indeed this is new added in v2 patch set. Signed-off-by: Coly Li <colyli@suse.de> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Michael Lyle <mlyle@lyle.org> Cc: Michael Lyle <mlyle@lyle.org> Cc: Junhui Tang <tang.junhui@zte.com.cn> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-03-19 00:36:25 +00:00
atomic_set(&dc->io_errors, 0);
dc->io_disable = false;
dc->error_limit = DEFAULT_CACHED_DEV_ERROR_LIMIT;
bcache: add stop_when_cache_set_failed option to backing device When there are too many I/O errors on cache device, current bcache code will retire the whole cache set, and detach all bcache devices. But the detached bcache devices are not stopped, which is problematic when bcache is in writeback mode. If the retired cache set has dirty data of backing devices, continue writing to bcache device will write to backing device directly. If the LBA of write request has a dirty version cached on cache device, next time when the cache device is re-registered and backing device re-attached to it again, the stale dirty data on cache device will be written to backing device, and overwrite latest directly written data. This situation causes a quite data corruption. But we cannot simply stop all attached bcache devices when the cache set is broken or disconnected. For example, use bcache to accelerate performance of an email service. In such workload, if cache device is broken but no dirty data lost, keep the bcache device alive and permit email service continue to access user data might be a better solution for the cache device failure. Nix <nix@esperi.org.uk> points out the issue and provides the above example to explain why it might be necessary to not stop bcache device for broken cache device. Pavel Goran <via-bcache@pvgoran.name> provides a brilliant suggestion to provide "always" and "auto" options to per-cached device sysfs file stop_when_cache_set_failed. If cache set is retiring and the backing device has no dirty data on cache, it should be safe to keep the bcache device alive. In this case, if stop_when_cache_set_failed is set to "auto", the device failure handling code will not stop this bcache device and permit application to access the backing device with a unattached bcache device. Changelog: [mlyle: edited to not break string constants across lines] v3: fix typos pointed out by Nix. v2: change option values of stop_when_cache_set_failed from 1/0 to "auto"/"always". v1: initial version, stop_when_cache_set_failed can be 0 (not stop) or 1 (always stop). Signed-off-by: Coly Li <colyli@suse.de> Reviewed-by: Michael Lyle <mlyle@lyle.org> Signed-off-by: Michael Lyle <mlyle@lyle.org> Cc: Nix <nix@esperi.org.uk> Cc: Pavel Goran <via-bcache@pvgoran.name> Cc: Junhui Tang <tang.junhui@zte.com.cn> Cc: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-03-19 00:36:18 +00:00
/* default to auto */
dc->stop_when_cache_set_failed = BCH_CACHED_DEV_STOP_AUTO;
bch_cached_dev_request_init(dc);
bch_cached_dev_writeback_init(dc);
return 0;
}
/* Cached device - bcache superblock */
static void register_bdev(struct cache_sb *sb, struct page *sb_page,
struct block_device *bdev,
struct cached_dev *dc)
{
const char *err = "cannot allocate memory";
struct cache_set *c;
bdevname(bdev, dc->backing_dev_name);
memcpy(&dc->sb, sb, sizeof(struct cache_sb));
dc->bdev = bdev;
dc->bdev->bd_holder = dc;
bio_init(&dc->sb_bio, dc->sb_bio.bi_inline_vecs, 1);
bio_first_bvec_all(&dc->sb_bio)->bv_page = sb_page;
get_page(sb_page);
if (cached_dev_init(dc, sb->block_size << 9))
goto err;
err = "error creating kobject";
if (kobject_add(&dc->disk.kobj, &part_to_dev(bdev->bd_part)->kobj,
"bcache"))
goto err;
if (bch_cache_accounting_add_kobjs(&dc->accounting, &dc->disk.kobj))
goto err;
pr_info("registered backing device %s", dc->backing_dev_name);
list_add(&dc->list, &uncached_devices);
/* attach to a matched cache set if it exists */
list_for_each_entry(c, &bch_cache_sets, list)
bcache: fix for data collapse after re-attaching an attached device back-end device sdm has already attached a cache_set with ID f67ebe1f-f8bc-4d73-bfe5-9dc88607f119, then try to attach with another cache set, and it returns with an error: [root]# cd /sys/block/sdm/bcache [root]# echo 5ccd0a63-148e-48b8-afa2-aca9cbd6279f > attach -bash: echo: write error: Invalid argument After that, execute a command to modify the label of bcache device: [root]# echo data_disk1 > label Then we reboot the system, when the system power on, the back-end device can not attach to cache_set, a messages show in the log: Feb 5 12:05:52 ceph152 kernel: [922385.508498] bcache: bch_cached_dev_attach() couldn't find uuid for sdm in set In sysfs_attach(), dc->sb.set_uuid was assigned to the value which input through sysfs, no matter whether it is success or not in bch_cached_dev_attach(). For example, If the back-end device has already attached to an cache set, bch_cached_dev_attach() would fail, but dc->sb.set_uuid was changed. Then modify the label of bcache device, it will call bch_write_bdev_super(), which would write the dc->sb.set_uuid to the super block, so we record a wrong cache set ID in the super block, after the system reboot, the cache set couldn't find the uuid of the back-end device, so the bcache device couldn't exist and use any more. In this patch, we don't assigned cache set ID to dc->sb.set_uuid in sysfs_attach() directly, but input it into bch_cached_dev_attach(), and assigned dc->sb.set_uuid to the cache set ID after the back-end device attached to the cache set successful. Signed-off-by: Tang Junhui <tang.junhui@zte.com.cn> Reviewed-by: Michael Lyle <mlyle@lyle.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-02-07 19:41:46 +00:00
bch_cached_dev_attach(dc, c, NULL);
if (BDEV_STATE(&dc->sb) == BDEV_STATE_NONE ||
BDEV_STATE(&dc->sb) == BDEV_STATE_STALE)
bch_cached_dev_run(dc);
return;
err:
pr_notice("error %s: %s", dc->backing_dev_name, err);
bcache_device_stop(&dc->disk);
}
/* Flash only volumes */
void bch_flash_dev_release(struct kobject *kobj)
{
struct bcache_device *d = container_of(kobj, struct bcache_device,
kobj);
kfree(d);
}
static void flash_dev_free(struct closure *cl)
{
struct bcache_device *d = container_of(cl, struct bcache_device, cl);
mutex_lock(&bch_register_lock);
atomic_long_sub(bcache_dev_sectors_dirty(d),
&d->c->flash_dev_dirty_sectors);
bcache_device_free(d);
mutex_unlock(&bch_register_lock);
kobject_put(&d->kobj);
}
static void flash_dev_flush(struct closure *cl)
{
struct bcache_device *d = container_of(cl, struct bcache_device, cl);
mutex_lock(&bch_register_lock);
bcache_device_unlink(d);
mutex_unlock(&bch_register_lock);
kobject_del(&d->kobj);
continue_at(cl, flash_dev_free, system_wq);
}
static int flash_dev_run(struct cache_set *c, struct uuid_entry *u)
{
struct bcache_device *d = kzalloc(sizeof(struct bcache_device),
GFP_KERNEL);
if (!d)
return -ENOMEM;
closure_init(&d->cl, NULL);
set_closure_fn(&d->cl, flash_dev_flush, system_wq);
kobject_init(&d->kobj, &bch_flash_dev_ktype);
if (bcache_device_init(d, block_bytes(c), u->sectors))
goto err;
bcache_device_attach(d, c, u - c->uuids);
bch_sectors_dirty_init(d);
bch_flash_dev_request_init(d);
add_disk(d->disk);
if (kobject_add(&d->kobj, &disk_to_dev(d->disk)->kobj, "bcache"))
goto err;
bcache_device_link(d, c, "volume");
return 0;
err:
kobject_put(&d->kobj);
return -ENOMEM;
}
static int flash_devs_run(struct cache_set *c)
{
int ret = 0;
struct uuid_entry *u;
for (u = c->uuids;
u < c->uuids + c->nr_uuids && !ret;
u++)
if (UUID_FLASH_ONLY(u))
ret = flash_dev_run(c, u);
return ret;
}
int bch_flash_dev_create(struct cache_set *c, uint64_t size)
{
struct uuid_entry *u;
if (test_bit(CACHE_SET_STOPPING, &c->flags))
return -EINTR;
if (!test_bit(CACHE_SET_RUNNING, &c->flags))
return -EPERM;
u = uuid_find_empty(c);
if (!u) {
pr_err("Can't create volume, no room for UUID");
return -EINVAL;
}
get_random_bytes(u->uuid, 16);
memset(u->label, 0, 32);
u->first_reg = u->last_reg = cpu_to_le32((u32)ktime_get_real_seconds());
SET_UUID_FLASH_ONLY(u, 1);
u->sectors = size >> 9;
bch_uuid_write(c);
return flash_dev_run(c, u);
}
bcache: add io_disable to struct cached_dev If a bcache device is configured to writeback mode, current code does not handle write I/O errors on backing devices properly. In writeback mode, write request is written to cache device, and latter being flushed to backing device. If I/O failed when writing from cache device to the backing device, bcache code just ignores the error and upper layer code is NOT noticed that the backing device is broken. This patch tries to handle backing device failure like how the cache device failure is handled, - Add a error counter 'io_errors' and error limit 'error_limit' in struct cached_dev. Add another io_disable to struct cached_dev to disable I/Os on the problematic backing device. - When I/O error happens on backing device, increase io_errors counter. And if io_errors reaches error_limit, set cache_dev->io_disable to true, and stop the bcache device. The result is, if backing device is broken of disconnected, and I/O errors reach its error limit, backing device will be disabled and the associated bcache device will be removed from system. Changelog: v2: remove "bcache: " prefix in pr_error(), and use correct name string to print out bcache device gendisk name. v1: indeed this is new added in v2 patch set. Signed-off-by: Coly Li <colyli@suse.de> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Michael Lyle <mlyle@lyle.org> Cc: Michael Lyle <mlyle@lyle.org> Cc: Junhui Tang <tang.junhui@zte.com.cn> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-03-19 00:36:25 +00:00
bool bch_cached_dev_error(struct cached_dev *dc)
{
bcache: set CACHE_SET_IO_DISABLE in bch_cached_dev_error() Commit c7b7bd07404c5 ("bcache: add io_disable to struct cached_dev") tries to stop bcache device by calling bcache_device_stop() when too many I/O errors happened on backing device. But if there is internal I/O happening on cache device (writeback scan, garbage collection, etc), a regular I/O request triggers the internal I/Os may still holds a refcount of dc->count, and the refcount may only be dropped after the internal I/O stopped. By this patch, bch_cached_dev_error() will check if the backing device is attached to a cache set, if yes that CACHE_SET_IO_DISABLE will be set to flags of this cache set. Then internal I/Os on cache device will be rejected and stopped immediately, and the bcache device can be stopped. For people who are not familiar with the interesting refcount dependance, let me explain a bit more how the fix works. Example the writeback thread will scan cache device for dirty data writeback purpose. Before it stopps, it holds a refcount of dc->count. When CACHE_SET_IO_DISABLE bit is set, the internal I/O will stopped and the while-loop in bch_writeback_thread() quits and calls cached_dev_put() to drop dc->count. If this is the last refcount to drop, then cached_dev_detach_finish() will be called. In this call back function, in turn closure_put(dc->disk.cl) is called to drop a refcount of closure dc->disk.cl. If this is the last refcount of this closure to drop, then cached_dev_flush() will be called. Then the cached device is freed. So if CACHE_SET_IO_DISABLE is not set, the bache device can not be stopped until all inernal cache device I/O stopped. For large size cache device, and writeback thread competes locks with gc thread, there might be a quite long time to wait. Fixes: c7b7bd07404c5 ("bcache: add io_disable to struct cached_dev") Signed-off-by: Coly Li <colyli@suse.de> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-05-03 10:51:33 +00:00
struct cache_set *c;
bcache: add io_disable to struct cached_dev If a bcache device is configured to writeback mode, current code does not handle write I/O errors on backing devices properly. In writeback mode, write request is written to cache device, and latter being flushed to backing device. If I/O failed when writing from cache device to the backing device, bcache code just ignores the error and upper layer code is NOT noticed that the backing device is broken. This patch tries to handle backing device failure like how the cache device failure is handled, - Add a error counter 'io_errors' and error limit 'error_limit' in struct cached_dev. Add another io_disable to struct cached_dev to disable I/Os on the problematic backing device. - When I/O error happens on backing device, increase io_errors counter. And if io_errors reaches error_limit, set cache_dev->io_disable to true, and stop the bcache device. The result is, if backing device is broken of disconnected, and I/O errors reach its error limit, backing device will be disabled and the associated bcache device will be removed from system. Changelog: v2: remove "bcache: " prefix in pr_error(), and use correct name string to print out bcache device gendisk name. v1: indeed this is new added in v2 patch set. Signed-off-by: Coly Li <colyli@suse.de> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Michael Lyle <mlyle@lyle.org> Cc: Michael Lyle <mlyle@lyle.org> Cc: Junhui Tang <tang.junhui@zte.com.cn> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-03-19 00:36:25 +00:00
if (!dc || test_bit(BCACHE_DEV_CLOSING, &dc->disk.flags))
return false;
dc->io_disable = true;
/* make others know io_disable is true earlier */
smp_mb();
pr_err("stop %s: too many IO errors on backing device %s\n",
dc->disk.disk->disk_name, dc->backing_dev_name);
bcache: add io_disable to struct cached_dev If a bcache device is configured to writeback mode, current code does not handle write I/O errors on backing devices properly. In writeback mode, write request is written to cache device, and latter being flushed to backing device. If I/O failed when writing from cache device to the backing device, bcache code just ignores the error and upper layer code is NOT noticed that the backing device is broken. This patch tries to handle backing device failure like how the cache device failure is handled, - Add a error counter 'io_errors' and error limit 'error_limit' in struct cached_dev. Add another io_disable to struct cached_dev to disable I/Os on the problematic backing device. - When I/O error happens on backing device, increase io_errors counter. And if io_errors reaches error_limit, set cache_dev->io_disable to true, and stop the bcache device. The result is, if backing device is broken of disconnected, and I/O errors reach its error limit, backing device will be disabled and the associated bcache device will be removed from system. Changelog: v2: remove "bcache: " prefix in pr_error(), and use correct name string to print out bcache device gendisk name. v1: indeed this is new added in v2 patch set. Signed-off-by: Coly Li <colyli@suse.de> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Michael Lyle <mlyle@lyle.org> Cc: Michael Lyle <mlyle@lyle.org> Cc: Junhui Tang <tang.junhui@zte.com.cn> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-03-19 00:36:25 +00:00
bcache: set CACHE_SET_IO_DISABLE in bch_cached_dev_error() Commit c7b7bd07404c5 ("bcache: add io_disable to struct cached_dev") tries to stop bcache device by calling bcache_device_stop() when too many I/O errors happened on backing device. But if there is internal I/O happening on cache device (writeback scan, garbage collection, etc), a regular I/O request triggers the internal I/Os may still holds a refcount of dc->count, and the refcount may only be dropped after the internal I/O stopped. By this patch, bch_cached_dev_error() will check if the backing device is attached to a cache set, if yes that CACHE_SET_IO_DISABLE will be set to flags of this cache set. Then internal I/Os on cache device will be rejected and stopped immediately, and the bcache device can be stopped. For people who are not familiar with the interesting refcount dependance, let me explain a bit more how the fix works. Example the writeback thread will scan cache device for dirty data writeback purpose. Before it stopps, it holds a refcount of dc->count. When CACHE_SET_IO_DISABLE bit is set, the internal I/O will stopped and the while-loop in bch_writeback_thread() quits and calls cached_dev_put() to drop dc->count. If this is the last refcount to drop, then cached_dev_detach_finish() will be called. In this call back function, in turn closure_put(dc->disk.cl) is called to drop a refcount of closure dc->disk.cl. If this is the last refcount of this closure to drop, then cached_dev_flush() will be called. Then the cached device is freed. So if CACHE_SET_IO_DISABLE is not set, the bache device can not be stopped until all inernal cache device I/O stopped. For large size cache device, and writeback thread competes locks with gc thread, there might be a quite long time to wait. Fixes: c7b7bd07404c5 ("bcache: add io_disable to struct cached_dev") Signed-off-by: Coly Li <colyli@suse.de> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-05-03 10:51:33 +00:00
/*
* If the cached device is still attached to a cache set,
* even dc->io_disable is true and no more I/O requests
* accepted, cache device internal I/O (writeback scan or
* garbage collection) may still prevent bcache device from
* being stopped. So here CACHE_SET_IO_DISABLE should be
* set to c->flags too, to make the internal I/O to cache
* device rejected and stopped immediately.
* If c is NULL, that means the bcache device is not attached
* to any cache set, then no CACHE_SET_IO_DISABLE bit to set.
*/
c = dc->disk.c;
if (c && test_and_set_bit(CACHE_SET_IO_DISABLE, &c->flags))
pr_info("CACHE_SET_IO_DISABLE already set");
bcache: add io_disable to struct cached_dev If a bcache device is configured to writeback mode, current code does not handle write I/O errors on backing devices properly. In writeback mode, write request is written to cache device, and latter being flushed to backing device. If I/O failed when writing from cache device to the backing device, bcache code just ignores the error and upper layer code is NOT noticed that the backing device is broken. This patch tries to handle backing device failure like how the cache device failure is handled, - Add a error counter 'io_errors' and error limit 'error_limit' in struct cached_dev. Add another io_disable to struct cached_dev to disable I/Os on the problematic backing device. - When I/O error happens on backing device, increase io_errors counter. And if io_errors reaches error_limit, set cache_dev->io_disable to true, and stop the bcache device. The result is, if backing device is broken of disconnected, and I/O errors reach its error limit, backing device will be disabled and the associated bcache device will be removed from system. Changelog: v2: remove "bcache: " prefix in pr_error(), and use correct name string to print out bcache device gendisk name. v1: indeed this is new added in v2 patch set. Signed-off-by: Coly Li <colyli@suse.de> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Michael Lyle <mlyle@lyle.org> Cc: Michael Lyle <mlyle@lyle.org> Cc: Junhui Tang <tang.junhui@zte.com.cn> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-03-19 00:36:25 +00:00
bcache_device_stop(&dc->disk);
return true;
}
/* Cache set */
__printf(2, 3)
bool bch_cache_set_error(struct cache_set *c, const char *fmt, ...)
{
va_list args;
if (c->on_error != ON_ERROR_PANIC &&
test_bit(CACHE_SET_STOPPING, &c->flags))
return false;
bcache: add CACHE_SET_IO_DISABLE to struct cache_set flags When too many I/Os failed on cache device, bch_cache_set_error() is called in the error handling code path to retire whole problematic cache set. If new I/O requests continue to come and take refcount dc->count, the cache set won't be retired immediately, this is a problem. Further more, there are several kernel thread and self-armed kernel work may still running after bch_cache_set_error() is called. It needs to wait quite a while for them to stop, or they won't stop at all. They also prevent the cache set from being retired. The solution in this patch is, to add per cache set flag to disable I/O request on this cache and all attached backing devices. Then new coming I/O requests can be rejected in *_make_request() before taking refcount, kernel threads and self-armed kernel worker can stop very fast when flags bit CACHE_SET_IO_DISABLE is set. Because bcache also do internal I/Os for writeback, garbage collection, bucket allocation, journaling, this kind of I/O should be disabled after bch_cache_set_error() is called. So closure_bio_submit() is modified to check whether CACHE_SET_IO_DISABLE is set on cache_set->flags. If set, closure_bio_submit() will set bio->bi_status to BLK_STS_IOERR and return, generic_make_request() won't be called. A sysfs interface is also added to set or clear CACHE_SET_IO_DISABLE bit from cache_set->flags, to disable or enable cache set I/O for debugging. It is helpful to trigger more corner case issues for failed cache device. Changelog v4, add wait_for_kthread_stop(), and call it before exits writeback and gc kernel threads. v3, change CACHE_SET_IO_DISABLE from 4 to 3, since it is bit index. remove "bcache: " prefix when printing out kernel message. v2, more changes by previous review, - Use CACHE_SET_IO_DISABLE of cache_set->flags, suggested by Junhui. - Check CACHE_SET_IO_DISABLE in bch_btree_gc() to stop a while-loop, this is reported and inspired from origal patch of Pavel Vazharov. v1, initial version. Signed-off-by: Coly Li <colyli@suse.de> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Michael Lyle <mlyle@lyle.org> Cc: Junhui Tang <tang.junhui@zte.com.cn> Cc: Michael Lyle <mlyle@lyle.org> Cc: Pavel Vazharov <freakpv@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-03-19 00:36:17 +00:00
if (test_and_set_bit(CACHE_SET_IO_DISABLE, &c->flags))
pr_info("CACHE_SET_IO_DISABLE already set");
bcache: add CACHE_SET_IO_DISABLE to struct cache_set flags When too many I/Os failed on cache device, bch_cache_set_error() is called in the error handling code path to retire whole problematic cache set. If new I/O requests continue to come and take refcount dc->count, the cache set won't be retired immediately, this is a problem. Further more, there are several kernel thread and self-armed kernel work may still running after bch_cache_set_error() is called. It needs to wait quite a while for them to stop, or they won't stop at all. They also prevent the cache set from being retired. The solution in this patch is, to add per cache set flag to disable I/O request on this cache and all attached backing devices. Then new coming I/O requests can be rejected in *_make_request() before taking refcount, kernel threads and self-armed kernel worker can stop very fast when flags bit CACHE_SET_IO_DISABLE is set. Because bcache also do internal I/Os for writeback, garbage collection, bucket allocation, journaling, this kind of I/O should be disabled after bch_cache_set_error() is called. So closure_bio_submit() is modified to check whether CACHE_SET_IO_DISABLE is set on cache_set->flags. If set, closure_bio_submit() will set bio->bi_status to BLK_STS_IOERR and return, generic_make_request() won't be called. A sysfs interface is also added to set or clear CACHE_SET_IO_DISABLE bit from cache_set->flags, to disable or enable cache set I/O for debugging. It is helpful to trigger more corner case issues for failed cache device. Changelog v4, add wait_for_kthread_stop(), and call it before exits writeback and gc kernel threads. v3, change CACHE_SET_IO_DISABLE from 4 to 3, since it is bit index. remove "bcache: " prefix when printing out kernel message. v2, more changes by previous review, - Use CACHE_SET_IO_DISABLE of cache_set->flags, suggested by Junhui. - Check CACHE_SET_IO_DISABLE in bch_btree_gc() to stop a while-loop, this is reported and inspired from origal patch of Pavel Vazharov. v1, initial version. Signed-off-by: Coly Li <colyli@suse.de> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Michael Lyle <mlyle@lyle.org> Cc: Junhui Tang <tang.junhui@zte.com.cn> Cc: Michael Lyle <mlyle@lyle.org> Cc: Pavel Vazharov <freakpv@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-03-19 00:36:17 +00:00
/*
* XXX: we can be called from atomic context
* acquire_console_sem();
*/
pr_err("bcache: error on %pU: ", c->sb.set_uuid);
va_start(args, fmt);
vprintk(fmt, args);
va_end(args);
pr_err(", disabling caching\n");
if (c->on_error == ON_ERROR_PANIC)
panic("panic forced after error\n");
bch_cache_set_unregister(c);
return true;
}
void bch_cache_set_release(struct kobject *kobj)
{
struct cache_set *c = container_of(kobj, struct cache_set, kobj);
kfree(c);
module_put(THIS_MODULE);
}
static void cache_set_free(struct closure *cl)
{
struct cache_set *c = container_of(cl, struct cache_set, cl);
struct cache *ca;
unsigned int i;
debugfs_remove(c->debug);
bch_open_buckets_free(c);
bch_btree_cache_free(c);
bch_journal_free(c);
for_each_cache(ca, c, i)
if (ca) {
ca->set = NULL;
c->cache[ca->sb.nr_this_dev] = NULL;
kobject_put(&ca->kobj);
}
bch_bset_sort_state_free(&c->sort);
free_pages((unsigned long) c->uuids, ilog2(bucket_pages(c)));
if (c->moving_gc_wq)
destroy_workqueue(c->moving_gc_wq);
bioset_exit(&c->bio_split);
mempool_exit(&c->fill_iter);
mempool_exit(&c->bio_meta);
mempool_exit(&c->search);
kfree(c->devices);
mutex_lock(&bch_register_lock);
list_del(&c->list);
mutex_unlock(&bch_register_lock);
pr_info("Cache set %pU unregistered", c->sb.set_uuid);
wake_up(&unregister_wait);
closure_debug_destroy(&c->cl);
kobject_put(&c->kobj);
}
static void cache_set_flush(struct closure *cl)
{
struct cache_set *c = container_of(cl, struct cache_set, caching);
struct cache *ca;
struct btree *b;
unsigned int i;
bch_cache_accounting_destroy(&c->accounting);
kobject_put(&c->internal);
kobject_del(&c->kobj);
if (c->gc_thread)
kthread_stop(c->gc_thread);
if (!IS_ERR_OR_NULL(c->root))
list_add(&c->root->list, &c->btree_cache);
/* Should skip this if we're unregistering because of an error */
list_for_each_entry(b, &c->btree_cache, list) {
mutex_lock(&b->write_lock);
if (btree_node_dirty(b))
__bch_btree_node_write(b, NULL);
mutex_unlock(&b->write_lock);
}
for_each_cache(ca, c, i)
if (ca->alloc_thread)
kthread_stop(ca->alloc_thread);
if (c->journal.cur) {
cancel_delayed_work_sync(&c->journal.work);
/* flush last journal entry if needed */
c->journal.work.work.func(&c->journal.work.work);
}
closure_return(cl);
}
bcache: add stop_when_cache_set_failed option to backing device When there are too many I/O errors on cache device, current bcache code will retire the whole cache set, and detach all bcache devices. But the detached bcache devices are not stopped, which is problematic when bcache is in writeback mode. If the retired cache set has dirty data of backing devices, continue writing to bcache device will write to backing device directly. If the LBA of write request has a dirty version cached on cache device, next time when the cache device is re-registered and backing device re-attached to it again, the stale dirty data on cache device will be written to backing device, and overwrite latest directly written data. This situation causes a quite data corruption. But we cannot simply stop all attached bcache devices when the cache set is broken or disconnected. For example, use bcache to accelerate performance of an email service. In such workload, if cache device is broken but no dirty data lost, keep the bcache device alive and permit email service continue to access user data might be a better solution for the cache device failure. Nix <nix@esperi.org.uk> points out the issue and provides the above example to explain why it might be necessary to not stop bcache device for broken cache device. Pavel Goran <via-bcache@pvgoran.name> provides a brilliant suggestion to provide "always" and "auto" options to per-cached device sysfs file stop_when_cache_set_failed. If cache set is retiring and the backing device has no dirty data on cache, it should be safe to keep the bcache device alive. In this case, if stop_when_cache_set_failed is set to "auto", the device failure handling code will not stop this bcache device and permit application to access the backing device with a unattached bcache device. Changelog: [mlyle: edited to not break string constants across lines] v3: fix typos pointed out by Nix. v2: change option values of stop_when_cache_set_failed from 1/0 to "auto"/"always". v1: initial version, stop_when_cache_set_failed can be 0 (not stop) or 1 (always stop). Signed-off-by: Coly Li <colyli@suse.de> Reviewed-by: Michael Lyle <mlyle@lyle.org> Signed-off-by: Michael Lyle <mlyle@lyle.org> Cc: Nix <nix@esperi.org.uk> Cc: Pavel Goran <via-bcache@pvgoran.name> Cc: Junhui Tang <tang.junhui@zte.com.cn> Cc: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-03-19 00:36:18 +00:00
/*
* This function is only called when CACHE_SET_IO_DISABLE is set, which means
* cache set is unregistering due to too many I/O errors. In this condition,
* the bcache device might be stopped, it depends on stop_when_cache_set_failed
* value and whether the broken cache has dirty data:
*
* dc->stop_when_cache_set_failed dc->has_dirty stop bcache device
* BCH_CACHED_STOP_AUTO 0 NO
* BCH_CACHED_STOP_AUTO 1 YES
* BCH_CACHED_DEV_STOP_ALWAYS 0 YES
* BCH_CACHED_DEV_STOP_ALWAYS 1 YES
*
* The expected behavior is, if stop_when_cache_set_failed is configured to
* "auto" via sysfs interface, the bcache device will not be stopped if the
* backing device is clean on the broken cache device.
*/
static void conditional_stop_bcache_device(struct cache_set *c,
struct bcache_device *d,
struct cached_dev *dc)
{
if (dc->stop_when_cache_set_failed == BCH_CACHED_DEV_STOP_ALWAYS) {
pr_warn("stop_when_cache_set_failed of %s is \"always\", stop it for failed cache set %pU.",
d->disk->disk_name, c->sb.set_uuid);
bcache_device_stop(d);
} else if (atomic_read(&dc->has_dirty)) {
/*
* dc->stop_when_cache_set_failed == BCH_CACHED_STOP_AUTO
* and dc->has_dirty == 1
*/
pr_warn("stop_when_cache_set_failed of %s is \"auto\" and cache is dirty, stop it to avoid potential data corruption.",
d->disk->disk_name);
/*
* There might be a small time gap that cache set is
* released but bcache device is not. Inside this time
* gap, regular I/O requests will directly go into
* backing device as no cache set attached to. This
* behavior may also introduce potential inconsistence
* data in writeback mode while cache is dirty.
* Therefore before calling bcache_device_stop() due
* to a broken cache device, dc->io_disable should be
* explicitly set to true.
*/
dc->io_disable = true;
/* make others know io_disable is true earlier */
smp_mb();
bcache_device_stop(d);
bcache: add stop_when_cache_set_failed option to backing device When there are too many I/O errors on cache device, current bcache code will retire the whole cache set, and detach all bcache devices. But the detached bcache devices are not stopped, which is problematic when bcache is in writeback mode. If the retired cache set has dirty data of backing devices, continue writing to bcache device will write to backing device directly. If the LBA of write request has a dirty version cached on cache device, next time when the cache device is re-registered and backing device re-attached to it again, the stale dirty data on cache device will be written to backing device, and overwrite latest directly written data. This situation causes a quite data corruption. But we cannot simply stop all attached bcache devices when the cache set is broken or disconnected. For example, use bcache to accelerate performance of an email service. In such workload, if cache device is broken but no dirty data lost, keep the bcache device alive and permit email service continue to access user data might be a better solution for the cache device failure. Nix <nix@esperi.org.uk> points out the issue and provides the above example to explain why it might be necessary to not stop bcache device for broken cache device. Pavel Goran <via-bcache@pvgoran.name> provides a brilliant suggestion to provide "always" and "auto" options to per-cached device sysfs file stop_when_cache_set_failed. If cache set is retiring and the backing device has no dirty data on cache, it should be safe to keep the bcache device alive. In this case, if stop_when_cache_set_failed is set to "auto", the device failure handling code will not stop this bcache device and permit application to access the backing device with a unattached bcache device. Changelog: [mlyle: edited to not break string constants across lines] v3: fix typos pointed out by Nix. v2: change option values of stop_when_cache_set_failed from 1/0 to "auto"/"always". v1: initial version, stop_when_cache_set_failed can be 0 (not stop) or 1 (always stop). Signed-off-by: Coly Li <colyli@suse.de> Reviewed-by: Michael Lyle <mlyle@lyle.org> Signed-off-by: Michael Lyle <mlyle@lyle.org> Cc: Nix <nix@esperi.org.uk> Cc: Pavel Goran <via-bcache@pvgoran.name> Cc: Junhui Tang <tang.junhui@zte.com.cn> Cc: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-03-19 00:36:18 +00:00
} else {
/*
* dc->stop_when_cache_set_failed == BCH_CACHED_STOP_AUTO
* and dc->has_dirty == 0
*/
pr_warn("stop_when_cache_set_failed of %s is \"auto\" and cache is clean, keep it alive.",
d->disk->disk_name);
}
}
static void __cache_set_unregister(struct closure *cl)
{
struct cache_set *c = container_of(cl, struct cache_set, caching);
struct cached_dev *dc;
bcache: add stop_when_cache_set_failed option to backing device When there are too many I/O errors on cache device, current bcache code will retire the whole cache set, and detach all bcache devices. But the detached bcache devices are not stopped, which is problematic when bcache is in writeback mode. If the retired cache set has dirty data of backing devices, continue writing to bcache device will write to backing device directly. If the LBA of write request has a dirty version cached on cache device, next time when the cache device is re-registered and backing device re-attached to it again, the stale dirty data on cache device will be written to backing device, and overwrite latest directly written data. This situation causes a quite data corruption. But we cannot simply stop all attached bcache devices when the cache set is broken or disconnected. For example, use bcache to accelerate performance of an email service. In such workload, if cache device is broken but no dirty data lost, keep the bcache device alive and permit email service continue to access user data might be a better solution for the cache device failure. Nix <nix@esperi.org.uk> points out the issue and provides the above example to explain why it might be necessary to not stop bcache device for broken cache device. Pavel Goran <via-bcache@pvgoran.name> provides a brilliant suggestion to provide "always" and "auto" options to per-cached device sysfs file stop_when_cache_set_failed. If cache set is retiring and the backing device has no dirty data on cache, it should be safe to keep the bcache device alive. In this case, if stop_when_cache_set_failed is set to "auto", the device failure handling code will not stop this bcache device and permit application to access the backing device with a unattached bcache device. Changelog: [mlyle: edited to not break string constants across lines] v3: fix typos pointed out by Nix. v2: change option values of stop_when_cache_set_failed from 1/0 to "auto"/"always". v1: initial version, stop_when_cache_set_failed can be 0 (not stop) or 1 (always stop). Signed-off-by: Coly Li <colyli@suse.de> Reviewed-by: Michael Lyle <mlyle@lyle.org> Signed-off-by: Michael Lyle <mlyle@lyle.org> Cc: Nix <nix@esperi.org.uk> Cc: Pavel Goran <via-bcache@pvgoran.name> Cc: Junhui Tang <tang.junhui@zte.com.cn> Cc: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-03-19 00:36:18 +00:00
struct bcache_device *d;
size_t i;
mutex_lock(&bch_register_lock);
bcache: add stop_when_cache_set_failed option to backing device When there are too many I/O errors on cache device, current bcache code will retire the whole cache set, and detach all bcache devices. But the detached bcache devices are not stopped, which is problematic when bcache is in writeback mode. If the retired cache set has dirty data of backing devices, continue writing to bcache device will write to backing device directly. If the LBA of write request has a dirty version cached on cache device, next time when the cache device is re-registered and backing device re-attached to it again, the stale dirty data on cache device will be written to backing device, and overwrite latest directly written data. This situation causes a quite data corruption. But we cannot simply stop all attached bcache devices when the cache set is broken or disconnected. For example, use bcache to accelerate performance of an email service. In such workload, if cache device is broken but no dirty data lost, keep the bcache device alive and permit email service continue to access user data might be a better solution for the cache device failure. Nix <nix@esperi.org.uk> points out the issue and provides the above example to explain why it might be necessary to not stop bcache device for broken cache device. Pavel Goran <via-bcache@pvgoran.name> provides a brilliant suggestion to provide "always" and "auto" options to per-cached device sysfs file stop_when_cache_set_failed. If cache set is retiring and the backing device has no dirty data on cache, it should be safe to keep the bcache device alive. In this case, if stop_when_cache_set_failed is set to "auto", the device failure handling code will not stop this bcache device and permit application to access the backing device with a unattached bcache device. Changelog: [mlyle: edited to not break string constants across lines] v3: fix typos pointed out by Nix. v2: change option values of stop_when_cache_set_failed from 1/0 to "auto"/"always". v1: initial version, stop_when_cache_set_failed can be 0 (not stop) or 1 (always stop). Signed-off-by: Coly Li <colyli@suse.de> Reviewed-by: Michael Lyle <mlyle@lyle.org> Signed-off-by: Michael Lyle <mlyle@lyle.org> Cc: Nix <nix@esperi.org.uk> Cc: Pavel Goran <via-bcache@pvgoran.name> Cc: Junhui Tang <tang.junhui@zte.com.cn> Cc: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-03-19 00:36:18 +00:00
for (i = 0; i < c->devices_max_used; i++) {
d = c->devices[i];
if (!d)
continue;
if (!UUID_FLASH_ONLY(&c->uuids[i]) &&
test_bit(CACHE_SET_UNREGISTERING, &c->flags)) {
dc = container_of(d, struct cached_dev, disk);
bch_cached_dev_detach(dc);
if (test_bit(CACHE_SET_IO_DISABLE, &c->flags))
conditional_stop_bcache_device(c, d, dc);
} else {
bcache_device_stop(d);
}
bcache: add stop_when_cache_set_failed option to backing device When there are too many I/O errors on cache device, current bcache code will retire the whole cache set, and detach all bcache devices. But the detached bcache devices are not stopped, which is problematic when bcache is in writeback mode. If the retired cache set has dirty data of backing devices, continue writing to bcache device will write to backing device directly. If the LBA of write request has a dirty version cached on cache device, next time when the cache device is re-registered and backing device re-attached to it again, the stale dirty data on cache device will be written to backing device, and overwrite latest directly written data. This situation causes a quite data corruption. But we cannot simply stop all attached bcache devices when the cache set is broken or disconnected. For example, use bcache to accelerate performance of an email service. In such workload, if cache device is broken but no dirty data lost, keep the bcache device alive and permit email service continue to access user data might be a better solution for the cache device failure. Nix <nix@esperi.org.uk> points out the issue and provides the above example to explain why it might be necessary to not stop bcache device for broken cache device. Pavel Goran <via-bcache@pvgoran.name> provides a brilliant suggestion to provide "always" and "auto" options to per-cached device sysfs file stop_when_cache_set_failed. If cache set is retiring and the backing device has no dirty data on cache, it should be safe to keep the bcache device alive. In this case, if stop_when_cache_set_failed is set to "auto", the device failure handling code will not stop this bcache device and permit application to access the backing device with a unattached bcache device. Changelog: [mlyle: edited to not break string constants across lines] v3: fix typos pointed out by Nix. v2: change option values of stop_when_cache_set_failed from 1/0 to "auto"/"always". v1: initial version, stop_when_cache_set_failed can be 0 (not stop) or 1 (always stop). Signed-off-by: Coly Li <colyli@suse.de> Reviewed-by: Michael Lyle <mlyle@lyle.org> Signed-off-by: Michael Lyle <mlyle@lyle.org> Cc: Nix <nix@esperi.org.uk> Cc: Pavel Goran <via-bcache@pvgoran.name> Cc: Junhui Tang <tang.junhui@zte.com.cn> Cc: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-03-19 00:36:18 +00:00
}
mutex_unlock(&bch_register_lock);
continue_at(cl, cache_set_flush, system_wq);
}
void bch_cache_set_stop(struct cache_set *c)
{
if (!test_and_set_bit(CACHE_SET_STOPPING, &c->flags))
closure_queue(&c->caching);
}
void bch_cache_set_unregister(struct cache_set *c)
{
set_bit(CACHE_SET_UNREGISTERING, &c->flags);
bch_cache_set_stop(c);
}
#define alloc_bucket_pages(gfp, c) \
((void *) __get_free_pages(__GFP_ZERO|gfp, ilog2(bucket_pages(c))))
struct cache_set *bch_cache_set_alloc(struct cache_sb *sb)
{
int iter_size;
struct cache_set *c = kzalloc(sizeof(struct cache_set), GFP_KERNEL);
if (!c)
return NULL;
__module_get(THIS_MODULE);
closure_init(&c->cl, NULL);
set_closure_fn(&c->cl, cache_set_free, system_wq);
closure_init(&c->caching, &c->cl);
set_closure_fn(&c->caching, __cache_set_unregister, system_wq);
/* Maybe create continue_at_noreturn() and use it here? */
closure_set_stopped(&c->cl);
closure_put(&c->cl);
kobject_init(&c->kobj, &bch_cache_set_ktype);
kobject_init(&c->internal, &bch_cache_set_internal_ktype);
bch_cache_accounting_init(&c->accounting, &c->cl);
memcpy(c->sb.set_uuid, sb->set_uuid, 16);
c->sb.block_size = sb->block_size;
c->sb.bucket_size = sb->bucket_size;
c->sb.nr_in_set = sb->nr_in_set;
c->sb.last_mount = sb->last_mount;
c->bucket_bits = ilog2(sb->bucket_size);
c->block_bits = ilog2(sb->block_size);
c->nr_uuids = bucket_bytes(c) / sizeof(struct uuid_entry);
c->devices_max_used = 0;
bcache: set max writeback rate when I/O request is idle Commit b1092c9af9ed ("bcache: allow quick writeback when backing idle") allows the writeback rate to be faster if there is no I/O request on a bcache device. It works well if there is only one bcache device attached to the cache set. If there are many bcache devices attached to a cache set, it may introduce performance regression because multiple faster writeback threads of the idle bcache devices will compete the btree level locks with the bcache device who have I/O requests coming. This patch fixes the above issue by only permitting fast writebac when all bcache devices attached on the cache set are idle. And if one of the bcache devices has new I/O request coming, minimized all writeback throughput immediately and let PI controller __update_writeback_rate() to decide the upcoming writeback rate for each bcache device. Also when all bcache devices are idle, limited wrieback rate to a small number is wast of thoughput, especially when backing devices are slower non-rotation devices (e.g. SATA SSD). This patch sets a max writeback rate for each backing device if the whole cache set is idle. A faster writeback rate in idle time means new I/Os may have more available space for dirty data, and people may observe a better write performance then. Please note bcache may change its cache mode in run time, and this patch still works if the cache mode is switched from writeback mode and there is still dirty data on cache. Fixes: Commit b1092c9af9ed ("bcache: allow quick writeback when backing idle") Cc: stable@vger.kernel.org #4.16+ Signed-off-by: Coly Li <colyli@suse.de> Tested-by: Kai Krakow <kai@kaishome.de> Tested-by: Stefan Priebe <s.priebe@profihost.ag> Cc: Michael Lyle <mlyle@lyle.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-08-09 07:48:49 +00:00
atomic_set(&c->attached_dev_nr, 0);
c->btree_pages = bucket_pages(c);
if (c->btree_pages > BTREE_MAX_PAGES)
c->btree_pages = max_t(int, c->btree_pages / 4,
BTREE_MAX_PAGES);
sema_init(&c->sb_write_mutex, 1);
mutex_init(&c->bucket_lock);
init_waitqueue_head(&c->btree_cache_wait);
init_waitqueue_head(&c->bucket_wait);
init_waitqueue_head(&c->gc_wait);
sema_init(&c->uuid_write_mutex, 1);
spin_lock_init(&c->btree_gc_time.lock);
spin_lock_init(&c->btree_split_time.lock);
spin_lock_init(&c->btree_read_time.lock);
bch_moving_init_cache_set(c);
INIT_LIST_HEAD(&c->list);
INIT_LIST_HEAD(&c->cached_devs);
INIT_LIST_HEAD(&c->btree_cache);
INIT_LIST_HEAD(&c->btree_cache_freeable);
INIT_LIST_HEAD(&c->btree_cache_freed);
INIT_LIST_HEAD(&c->data_buckets);
iter_size = (sb->bucket_size / sb->block_size + 1) *
sizeof(struct btree_iter_set);
treewide: kzalloc() -> kcalloc() The kzalloc() function has a 2-factor argument form, kcalloc(). This patch replaces cases of: kzalloc(a * b, gfp) with: kcalloc(a * b, gfp) as well as handling cases of: kzalloc(a * b * c, gfp) with: kzalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kzalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kzalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kzalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kzalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kzalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(char) * COUNT + COUNT , ...) | kzalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kzalloc + kcalloc ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kzalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kzalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kzalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kzalloc(C1 * C2 * C3, ...) | kzalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kzalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kzalloc(sizeof(THING) * C2, ...) | kzalloc(sizeof(TYPE) * C2, ...) | kzalloc(C1 * C2 * C3, ...) | kzalloc(C1 * C2, ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - (E1) * E2 + E1, E2 , ...) | - kzalloc + kcalloc ( - (E1) * (E2) + E1, E2 , ...) | - kzalloc + kcalloc ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-12 21:03:40 +00:00
if (!(c->devices = kcalloc(c->nr_uuids, sizeof(void *), GFP_KERNEL)) ||
mempool_init_slab_pool(&c->search, 32, bch_search_cache) ||
mempool_init_kmalloc_pool(&c->bio_meta, 2,
sizeof(struct bbio) + sizeof(struct bio_vec) *
bucket_pages(c)) ||
mempool_init_kmalloc_pool(&c->fill_iter, 1, iter_size) ||
bioset_init(&c->bio_split, 4, offsetof(struct bbio, bio),
BIOSET_NEED_BVECS|BIOSET_NEED_RESCUER) ||
!(c->uuids = alloc_bucket_pages(GFP_KERNEL, c)) ||
!(c->moving_gc_wq = alloc_workqueue("bcache_gc",
WQ_MEM_RECLAIM, 0)) ||
bch_journal_alloc(c) ||
bch_btree_cache_alloc(c) ||
bch_open_buckets_alloc(c) ||
bch_bset_sort_state_init(&c->sort, ilog2(c->btree_pages)))
goto err;
c->congested_read_threshold_us = 2000;
c->congested_write_threshold_us = 20000;
bcache: set error_limit correctly Struct cache uses io_errors for two purposes, - Error decay: when cache set error_decay is set, io_errors is used to generate a small piece of delay when I/O error happens. - I/O errors counter: in order to generate big enough value for error decay, I/O errors counter value is stored by left shifting 20 bits (a.k.a IO_ERROR_SHIFT). In function bch_count_io_errors(), if I/O errors counter reaches cache set error limit, bch_cache_set_error() will be called to retire the whold cache set. But current code is problematic when checking the error limit, see the following code piece from bch_count_io_errors(), 90 if (error) { 91 char buf[BDEVNAME_SIZE]; 92 unsigned errors = atomic_add_return(1 << IO_ERROR_SHIFT, 93 &ca->io_errors); 94 errors >>= IO_ERROR_SHIFT; 95 96 if (errors < ca->set->error_limit) 97 pr_err("%s: IO error on %s, recovering", 98 bdevname(ca->bdev, buf), m); 99 else 100 bch_cache_set_error(ca->set, 101 "%s: too many IO errors %s", 102 bdevname(ca->bdev, buf), m); 103 } At line 94, errors is right shifting IO_ERROR_SHIFT bits, now it is real errors counter to compare at line 96. But ca->set->error_limit is initia- lized with an amplified value in bch_cache_set_alloc(), 1545 c->error_limit = 8 << IO_ERROR_SHIFT; It means by default, in bch_count_io_errors(), before 8<<20 errors happened bch_cache_set_error() won't be called to retire the problematic cache device. If the average request size is 64KB, it means bcache won't handle failed device until 512GB data is requested. This is too large to be an I/O threashold. So I believe the correct error limit should be much less. This patch sets default cache set error limit to 8, then in bch_count_io_errors() when errors counter reaches 8 (if it is default value), function bch_cache_set_error() will be called to retire the whole cache set. This patch also removes bits shifting when store or show io_error_limit value via sysfs interface. Nowadays most of SSDs handle internal flash failure automatically by LBA address re-indirect mapping. If an I/O error can be observed by upper layer code, it will be a notable error because that SSD can not re-indirect map the problematic LBA address to an available flash block. This situation indicates the whole SSD will be failed very soon. Therefore setting 8 as the default io error limit value makes sense, it is enough for most of cache devices. Changelog: v2: add reviewed-by from Hannes. v1: initial version for review. Signed-off-by: Coly Li <colyli@suse.de> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Tang Junhui <tang.junhui@zte.com.cn> Reviewed-by: Michael Lyle <mlyle@lyle.org> Cc: Junhui Tang <tang.junhui@zte.com.cn> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-02-07 19:41:42 +00:00
c->error_limit = DEFAULT_IO_ERROR_LIMIT;
bcache: add CACHE_SET_IO_DISABLE to struct cache_set flags When too many I/Os failed on cache device, bch_cache_set_error() is called in the error handling code path to retire whole problematic cache set. If new I/O requests continue to come and take refcount dc->count, the cache set won't be retired immediately, this is a problem. Further more, there are several kernel thread and self-armed kernel work may still running after bch_cache_set_error() is called. It needs to wait quite a while for them to stop, or they won't stop at all. They also prevent the cache set from being retired. The solution in this patch is, to add per cache set flag to disable I/O request on this cache and all attached backing devices. Then new coming I/O requests can be rejected in *_make_request() before taking refcount, kernel threads and self-armed kernel worker can stop very fast when flags bit CACHE_SET_IO_DISABLE is set. Because bcache also do internal I/Os for writeback, garbage collection, bucket allocation, journaling, this kind of I/O should be disabled after bch_cache_set_error() is called. So closure_bio_submit() is modified to check whether CACHE_SET_IO_DISABLE is set on cache_set->flags. If set, closure_bio_submit() will set bio->bi_status to BLK_STS_IOERR and return, generic_make_request() won't be called. A sysfs interface is also added to set or clear CACHE_SET_IO_DISABLE bit from cache_set->flags, to disable or enable cache set I/O for debugging. It is helpful to trigger more corner case issues for failed cache device. Changelog v4, add wait_for_kthread_stop(), and call it before exits writeback and gc kernel threads. v3, change CACHE_SET_IO_DISABLE from 4 to 3, since it is bit index. remove "bcache: " prefix when printing out kernel message. v2, more changes by previous review, - Use CACHE_SET_IO_DISABLE of cache_set->flags, suggested by Junhui. - Check CACHE_SET_IO_DISABLE in bch_btree_gc() to stop a while-loop, this is reported and inspired from origal patch of Pavel Vazharov. v1, initial version. Signed-off-by: Coly Li <colyli@suse.de> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Michael Lyle <mlyle@lyle.org> Cc: Junhui Tang <tang.junhui@zte.com.cn> Cc: Michael Lyle <mlyle@lyle.org> Cc: Pavel Vazharov <freakpv@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-03-19 00:36:17 +00:00
WARN_ON(test_and_clear_bit(CACHE_SET_IO_DISABLE, &c->flags));
return c;
err:
bch_cache_set_unregister(c);
return NULL;
}
static void run_cache_set(struct cache_set *c)
{
const char *err = "cannot allocate memory";
struct cached_dev *dc, *t;
struct cache *ca;
struct closure cl;
unsigned int i;
closure_init_stack(&cl);
for_each_cache(ca, c, i)
c->nbuckets += ca->sb.nbuckets;
set_gc_sectors(c);
if (CACHE_SYNC(&c->sb)) {
LIST_HEAD(journal);
struct bkey *k;
struct jset *j;
err = "cannot allocate memory for journal";
if (bch_journal_read(c, &journal))
goto err;
pr_debug("btree_journal_read() done");
err = "no journal entries found";
if (list_empty(&journal))
goto err;
j = &list_entry(journal.prev, struct journal_replay, list)->j;
err = "IO error reading priorities";
for_each_cache(ca, c, i)
prio_read(ca, j->prio_bucket[ca->sb.nr_this_dev]);
/*
* If prio_read() fails it'll call cache_set_error and we'll
* tear everything down right away, but if we perhaps checked
* sooner we could avoid journal replay.
*/
k = &j->btree_root;
err = "bad btree root";
if (__bch_btree_ptr_invalid(c, k))
goto err;
err = "error reading btree root";
c->root = bch_btree_node_get(c, NULL, k,
j->btree_level,
true, NULL);
if (IS_ERR_OR_NULL(c->root))
goto err;
list_del_init(&c->root->list);
rw_unlock(true, c->root);
err = uuid_read(c, j, &cl);
if (err)
goto err;
err = "error in recovery";
if (bch_btree_check(c))
goto err;
bch_journal_mark(c, &journal);
bch_initial_gc_finish(c);
pr_debug("btree_check() done");
/*
* bcache_journal_next() can't happen sooner, or
* btree_gc_finish() will give spurious errors about last_gc >
* gc_gen - this is a hack but oh well.
*/
bch_journal_next(&c->journal);
err = "error starting allocator thread";
for_each_cache(ca, c, i)
if (bch_cache_allocator_start(ca))
goto err;
/*
* First place it's safe to allocate: btree_check() and
* btree_gc_finish() have to run before we have buckets to
* allocate, and bch_bucket_alloc_set() might cause a journal
* entry to be written so bcache_journal_next() has to be called
* first.
*
* If the uuids were in the old format we have to rewrite them
* before the next journal entry is written:
*/
if (j->version < BCACHE_JSET_VERSION_UUID)
__uuid_write(c);
bch_journal_replay(c, &journal);
} else {
pr_notice("invalidating existing data");
for_each_cache(ca, c, i) {
unsigned int j;
ca->sb.keys = clamp_t(int, ca->sb.nbuckets >> 7,
2, SB_JOURNAL_BUCKETS);
for (j = 0; j < ca->sb.keys; j++)
ca->sb.d[j] = ca->sb.first_bucket + j;
}
bch_initial_gc_finish(c);
err = "error starting allocator thread";
for_each_cache(ca, c, i)
if (bch_cache_allocator_start(ca))
goto err;
mutex_lock(&c->bucket_lock);
for_each_cache(ca, c, i)
bch_prio_write(ca);
mutex_unlock(&c->bucket_lock);
err = "cannot allocate new UUID bucket";
if (__uuid_write(c))
goto err;
err = "cannot allocate new btree root";
c->root = __bch_btree_node_alloc(c, NULL, 0, true, NULL);
if (IS_ERR_OR_NULL(c->root))
goto err;
mutex_lock(&c->root->write_lock);
bkey_copy_key(&c->root->key, &MAX_KEY);
bch_btree_node_write(c->root, &cl);
mutex_unlock(&c->root->write_lock);
bch_btree_set_root(c->root);
rw_unlock(true, c->root);
/*
* We don't want to write the first journal entry until
* everything is set up - fortunately journal entries won't be
* written until the SET_CACHE_SYNC() here:
*/
SET_CACHE_SYNC(&c->sb, true);
bch_journal_next(&c->journal);
bch_journal_meta(c, &cl);
}
err = "error starting gc thread";
if (bch_gc_thread_start(c))
goto err;
closure_sync(&cl);
c->sb.last_mount = (u32)ktime_get_real_seconds();
bcache_write_super(c);
list_for_each_entry_safe(dc, t, &uncached_devices, list)
bcache: fix for data collapse after re-attaching an attached device back-end device sdm has already attached a cache_set with ID f67ebe1f-f8bc-4d73-bfe5-9dc88607f119, then try to attach with another cache set, and it returns with an error: [root]# cd /sys/block/sdm/bcache [root]# echo 5ccd0a63-148e-48b8-afa2-aca9cbd6279f > attach -bash: echo: write error: Invalid argument After that, execute a command to modify the label of bcache device: [root]# echo data_disk1 > label Then we reboot the system, when the system power on, the back-end device can not attach to cache_set, a messages show in the log: Feb 5 12:05:52 ceph152 kernel: [922385.508498] bcache: bch_cached_dev_attach() couldn't find uuid for sdm in set In sysfs_attach(), dc->sb.set_uuid was assigned to the value which input through sysfs, no matter whether it is success or not in bch_cached_dev_attach(). For example, If the back-end device has already attached to an cache set, bch_cached_dev_attach() would fail, but dc->sb.set_uuid was changed. Then modify the label of bcache device, it will call bch_write_bdev_super(), which would write the dc->sb.set_uuid to the super block, so we record a wrong cache set ID in the super block, after the system reboot, the cache set couldn't find the uuid of the back-end device, so the bcache device couldn't exist and use any more. In this patch, we don't assigned cache set ID to dc->sb.set_uuid in sysfs_attach() directly, but input it into bch_cached_dev_attach(), and assigned dc->sb.set_uuid to the cache set ID after the back-end device attached to the cache set successful. Signed-off-by: Tang Junhui <tang.junhui@zte.com.cn> Reviewed-by: Michael Lyle <mlyle@lyle.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-02-07 19:41:46 +00:00
bch_cached_dev_attach(dc, c, NULL);
flash_devs_run(c);
set_bit(CACHE_SET_RUNNING, &c->flags);
return;
err:
closure_sync(&cl);
/* XXX: test this, it's broken */
bch_cache_set_error(c, "%s", err);
}
static bool can_attach_cache(struct cache *ca, struct cache_set *c)
{
return ca->sb.block_size == c->sb.block_size &&
ca->sb.bucket_size == c->sb.bucket_size &&
ca->sb.nr_in_set == c->sb.nr_in_set;
}
static const char *register_cache_set(struct cache *ca)
{
char buf[12];
const char *err = "cannot allocate memory";
struct cache_set *c;
list_for_each_entry(c, &bch_cache_sets, list)
if (!memcmp(c->sb.set_uuid, ca->sb.set_uuid, 16)) {
if (c->cache[ca->sb.nr_this_dev])
return "duplicate cache set member";
if (!can_attach_cache(ca, c))
return "cache sb does not match set";
if (!CACHE_SYNC(&ca->sb))
SET_CACHE_SYNC(&c->sb, false);
goto found;
}
c = bch_cache_set_alloc(&ca->sb);
if (!c)
return err;
err = "error creating kobject";
if (kobject_add(&c->kobj, bcache_kobj, "%pU", c->sb.set_uuid) ||
kobject_add(&c->internal, &c->kobj, "internal"))
goto err;
if (bch_cache_accounting_add_kobjs(&c->accounting, &c->kobj))
goto err;
bch_debug_init_cache_set(c);
list_add(&c->list, &bch_cache_sets);
found:
sprintf(buf, "cache%i", ca->sb.nr_this_dev);
if (sysfs_create_link(&ca->kobj, &c->kobj, "set") ||
sysfs_create_link(&c->kobj, &ca->kobj, buf))
goto err;
if (ca->sb.seq > c->sb.seq) {
c->sb.version = ca->sb.version;
memcpy(c->sb.set_uuid, ca->sb.set_uuid, 16);
c->sb.flags = ca->sb.flags;
c->sb.seq = ca->sb.seq;
pr_debug("set version = %llu", c->sb.version);
}
kobject_get(&ca->kobj);
ca->set = c;
ca->set->cache[ca->sb.nr_this_dev] = ca;
c->cache_by_alloc[c->caches_loaded++] = ca;
if (c->caches_loaded == c->sb.nr_in_set)
run_cache_set(c);
return NULL;
err:
bch_cache_set_unregister(c);
return err;
}
/* Cache device */
void bch_cache_release(struct kobject *kobj)
{
struct cache *ca = container_of(kobj, struct cache, kobj);
unsigned int i;
if (ca->set) {
BUG_ON(ca->set->cache[ca->sb.nr_this_dev] != ca);
ca->set->cache[ca->sb.nr_this_dev] = NULL;
}
free_pages((unsigned long) ca->disk_buckets, ilog2(bucket_pages(ca)));
kfree(ca->prio_buckets);
vfree(ca->buckets);
free_heap(&ca->heap);
free_fifo(&ca->free_inc);
for (i = 0; i < RESERVE_NR; i++)
free_fifo(&ca->free[i]);
if (ca->sb_bio.bi_inline_vecs[0].bv_page)
put_page(bio_first_page_all(&ca->sb_bio));
if (!IS_ERR_OR_NULL(ca->bdev))
blkdev_put(ca->bdev, FMODE_READ|FMODE_WRITE|FMODE_EXCL);
kfree(ca);
module_put(THIS_MODULE);
}
static int cache_alloc(struct cache *ca)
{
size_t free;
bcache: fix for allocator and register thread race After long time running of random small IO writing, I reboot the machine, and after the machine power on, I found bcache got stuck, the stack is: [root@ceph153 ~]# cat /proc/2510/task/*/stack [<ffffffffa06b2455>] closure_sync+0x25/0x90 [bcache] [<ffffffffa06b6be8>] bch_journal+0x118/0x2b0 [bcache] [<ffffffffa06b6dc7>] bch_journal_meta+0x47/0x70 [bcache] [<ffffffffa06be8f7>] bch_prio_write+0x237/0x340 [bcache] [<ffffffffa06a8018>] bch_allocator_thread+0x3c8/0x3d0 [bcache] [<ffffffff810a631f>] kthread+0xcf/0xe0 [<ffffffff8164c318>] ret_from_fork+0x58/0x90 [<ffffffffffffffff>] 0xffffffffffffffff [root@ceph153 ~]# cat /proc/2038/task/*/stack [<ffffffffa06b1abd>] __bch_btree_map_nodes+0x12d/0x150 [bcache] [<ffffffffa06b1bd1>] bch_btree_insert+0xf1/0x170 [bcache] [<ffffffffa06b637f>] bch_journal_replay+0x13f/0x230 [bcache] [<ffffffffa06c75fe>] run_cache_set+0x79a/0x7c2 [bcache] [<ffffffffa06c0cf8>] register_bcache+0xd48/0x1310 [bcache] [<ffffffff812f702f>] kobj_attr_store+0xf/0x20 [<ffffffff8125b216>] sysfs_write_file+0xc6/0x140 [<ffffffff811dfbfd>] vfs_write+0xbd/0x1e0 [<ffffffff811e069f>] SyS_write+0x7f/0xe0 [<ffffffff8164c3c9>] system_call_fastpath+0x16/0x1 The stack shows the register thread and allocator thread were getting stuck when registering cache device. I reboot the machine several times, the issue always exsit in this machine. I debug the code, and found the call trace as bellow: register_bcache() ==>run_cache_set() ==>bch_journal_replay() ==>bch_btree_insert() ==>__bch_btree_map_nodes() ==>btree_insert_fn() ==>btree_split() //node need split ==>btree_check_reserve() In btree_check_reserve(), It will check if there is enough buckets of RESERVE_BTREE type, since allocator thread did not work yet, so no buckets of RESERVE_BTREE type allocated, so the register thread waits on c->btree_cache_wait, and goes to sleep. Then the allocator thread initialized, the call trace is bellow: bch_allocator_thread() ==>bch_prio_write() ==>bch_journal_meta() ==>bch_journal() ==>journal_wait_for_write() In journal_wait_for_write(), It will check if journal is full by journal_full(), but the long time random small IO writing causes the exhaustion of journal buckets(journal.blocks_free=0), In order to release the journal buckets, the allocator calls btree_flush_write() to flush keys to btree nodes, and waits on c->journal.wait until btree nodes writing over or there has already some journal buckets space, then the allocator thread goes to sleep. but in btree_flush_write(), since bch_journal_replay() is not finished, so no btree nodes have journal (condition "if (btree_current_write(b)->journal)" never satisfied), so we got no btree node to flush, no journal bucket released, and allocator sleep all the times. Through the above analysis, we can see that: 1) Register thread wait for allocator thread to allocate buckets of RESERVE_BTREE type; 2) Alloctor thread wait for register thread to replay journal, so it can flush btree nodes and get journal bucket. then they are all got stuck by waiting for each other. Hua Rui provided a patch for me, by allocating some buckets of RESERVE_BTREE type in advance, so the register thread can get bucket when btree node splitting and no need to waiting for the allocator thread. I tested it, it has effect, and register thread run a step forward, but finally are still got stuck, the reason is only 8 bucket of RESERVE_BTREE type were allocated, and in bch_journal_replay(), after 2 btree nodes splitting, only 4 bucket of RESERVE_BTREE type left, then btree_check_reserve() is not satisfied anymore, so it goes to sleep again, and in the same time, alloctor thread did not flush enough btree nodes to release a journal bucket, so they all got stuck again. So we need to allocate more buckets of RESERVE_BTREE type in advance, but how much is enough? By experience and test, I think it should be as much as journal buckets. Then I modify the code as this patch, and test in the machine, and it works. This patch modified base on Hua Rui’s patch, and allocate more buckets of RESERVE_BTREE type in advance to avoid register thread and allocate thread going to wait for each other. [patch v2] ca->sb.njournal_buckets would be 0 in the first time after cache creation, and no journal exists, so just 8 btree buckets is OK. Signed-off-by: Hua Rui <huarui.dev@gmail.com> Signed-off-by: Tang Junhui <tang.junhui@zte.com.cn> Reviewed-by: Michael Lyle <mlyle@lyle.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-02-07 19:41:43 +00:00
size_t btree_buckets;
struct bucket *b;
int ret = -ENOMEM;
const char *err = NULL;
__module_get(THIS_MODULE);
kobject_init(&ca->kobj, &bch_cache_ktype);
bio_init(&ca->journal.bio, ca->journal.bio.bi_inline_vecs, 8);
bcache: fix for allocator and register thread race After long time running of random small IO writing, I reboot the machine, and after the machine power on, I found bcache got stuck, the stack is: [root@ceph153 ~]# cat /proc/2510/task/*/stack [<ffffffffa06b2455>] closure_sync+0x25/0x90 [bcache] [<ffffffffa06b6be8>] bch_journal+0x118/0x2b0 [bcache] [<ffffffffa06b6dc7>] bch_journal_meta+0x47/0x70 [bcache] [<ffffffffa06be8f7>] bch_prio_write+0x237/0x340 [bcache] [<ffffffffa06a8018>] bch_allocator_thread+0x3c8/0x3d0 [bcache] [<ffffffff810a631f>] kthread+0xcf/0xe0 [<ffffffff8164c318>] ret_from_fork+0x58/0x90 [<ffffffffffffffff>] 0xffffffffffffffff [root@ceph153 ~]# cat /proc/2038/task/*/stack [<ffffffffa06b1abd>] __bch_btree_map_nodes+0x12d/0x150 [bcache] [<ffffffffa06b1bd1>] bch_btree_insert+0xf1/0x170 [bcache] [<ffffffffa06b637f>] bch_journal_replay+0x13f/0x230 [bcache] [<ffffffffa06c75fe>] run_cache_set+0x79a/0x7c2 [bcache] [<ffffffffa06c0cf8>] register_bcache+0xd48/0x1310 [bcache] [<ffffffff812f702f>] kobj_attr_store+0xf/0x20 [<ffffffff8125b216>] sysfs_write_file+0xc6/0x140 [<ffffffff811dfbfd>] vfs_write+0xbd/0x1e0 [<ffffffff811e069f>] SyS_write+0x7f/0xe0 [<ffffffff8164c3c9>] system_call_fastpath+0x16/0x1 The stack shows the register thread and allocator thread were getting stuck when registering cache device. I reboot the machine several times, the issue always exsit in this machine. I debug the code, and found the call trace as bellow: register_bcache() ==>run_cache_set() ==>bch_journal_replay() ==>bch_btree_insert() ==>__bch_btree_map_nodes() ==>btree_insert_fn() ==>btree_split() //node need split ==>btree_check_reserve() In btree_check_reserve(), It will check if there is enough buckets of RESERVE_BTREE type, since allocator thread did not work yet, so no buckets of RESERVE_BTREE type allocated, so the register thread waits on c->btree_cache_wait, and goes to sleep. Then the allocator thread initialized, the call trace is bellow: bch_allocator_thread() ==>bch_prio_write() ==>bch_journal_meta() ==>bch_journal() ==>journal_wait_for_write() In journal_wait_for_write(), It will check if journal is full by journal_full(), but the long time random small IO writing causes the exhaustion of journal buckets(journal.blocks_free=0), In order to release the journal buckets, the allocator calls btree_flush_write() to flush keys to btree nodes, and waits on c->journal.wait until btree nodes writing over or there has already some journal buckets space, then the allocator thread goes to sleep. but in btree_flush_write(), since bch_journal_replay() is not finished, so no btree nodes have journal (condition "if (btree_current_write(b)->journal)" never satisfied), so we got no btree node to flush, no journal bucket released, and allocator sleep all the times. Through the above analysis, we can see that: 1) Register thread wait for allocator thread to allocate buckets of RESERVE_BTREE type; 2) Alloctor thread wait for register thread to replay journal, so it can flush btree nodes and get journal bucket. then they are all got stuck by waiting for each other. Hua Rui provided a patch for me, by allocating some buckets of RESERVE_BTREE type in advance, so the register thread can get bucket when btree node splitting and no need to waiting for the allocator thread. I tested it, it has effect, and register thread run a step forward, but finally are still got stuck, the reason is only 8 bucket of RESERVE_BTREE type were allocated, and in bch_journal_replay(), after 2 btree nodes splitting, only 4 bucket of RESERVE_BTREE type left, then btree_check_reserve() is not satisfied anymore, so it goes to sleep again, and in the same time, alloctor thread did not flush enough btree nodes to release a journal bucket, so they all got stuck again. So we need to allocate more buckets of RESERVE_BTREE type in advance, but how much is enough? By experience and test, I think it should be as much as journal buckets. Then I modify the code as this patch, and test in the machine, and it works. This patch modified base on Hua Rui’s patch, and allocate more buckets of RESERVE_BTREE type in advance to avoid register thread and allocate thread going to wait for each other. [patch v2] ca->sb.njournal_buckets would be 0 in the first time after cache creation, and no journal exists, so just 8 btree buckets is OK. Signed-off-by: Hua Rui <huarui.dev@gmail.com> Signed-off-by: Tang Junhui <tang.junhui@zte.com.cn> Reviewed-by: Michael Lyle <mlyle@lyle.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-02-07 19:41:43 +00:00
/*
* when ca->sb.njournal_buckets is not zero, journal exists,
* and in bch_journal_replay(), tree node may split,
* so bucket of RESERVE_BTREE type is needed,
* the worst situation is all journal buckets are valid journal,
* and all the keys need to replay,
* so the number of RESERVE_BTREE type buckets should be as much
* as journal buckets
*/
btree_buckets = ca->sb.njournal_buckets ?: 8;
free = roundup_pow_of_two(ca->sb.nbuckets) >> 10;
if (!free) {
ret = -EPERM;
err = "ca->sb.nbuckets is too small";
goto err_free;
}
if (!init_fifo(&ca->free[RESERVE_BTREE], btree_buckets,
GFP_KERNEL)) {
err = "ca->free[RESERVE_BTREE] alloc failed";
goto err_btree_alloc;
}
if (!init_fifo_exact(&ca->free[RESERVE_PRIO], prio_buckets(ca),
GFP_KERNEL)) {
err = "ca->free[RESERVE_PRIO] alloc failed";
goto err_prio_alloc;
}
if (!init_fifo(&ca->free[RESERVE_MOVINGGC], free, GFP_KERNEL)) {
err = "ca->free[RESERVE_MOVINGGC] alloc failed";
goto err_movinggc_alloc;
}
if (!init_fifo(&ca->free[RESERVE_NONE], free, GFP_KERNEL)) {
err = "ca->free[RESERVE_NONE] alloc failed";
goto err_none_alloc;
}
if (!init_fifo(&ca->free_inc, free << 2, GFP_KERNEL)) {
err = "ca->free_inc alloc failed";
goto err_free_inc_alloc;
}
if (!init_heap(&ca->heap, free << 3, GFP_KERNEL)) {
err = "ca->heap alloc failed";
goto err_heap_alloc;
}
ca->buckets = vzalloc(array_size(sizeof(struct bucket),
ca->sb.nbuckets));
if (!ca->buckets) {
err = "ca->buckets alloc failed";
goto err_buckets_alloc;
}
ca->prio_buckets = kzalloc(array3_size(sizeof(uint64_t),
prio_buckets(ca), 2),
GFP_KERNEL);
if (!ca->prio_buckets) {
err = "ca->prio_buckets alloc failed";
goto err_prio_buckets_alloc;
}
ca->disk_buckets = alloc_bucket_pages(GFP_KERNEL, ca);
if (!ca->disk_buckets) {
err = "ca->disk_buckets alloc failed";
goto err_disk_buckets_alloc;
}
ca->prio_last_buckets = ca->prio_buckets + prio_buckets(ca);
for_each_bucket(b, ca)
atomic_set(&b->pin, 0);
return 0;
err_disk_buckets_alloc:
kfree(ca->prio_buckets);
err_prio_buckets_alloc:
vfree(ca->buckets);
err_buckets_alloc:
free_heap(&ca->heap);
err_heap_alloc:
free_fifo(&ca->free_inc);
err_free_inc_alloc:
free_fifo(&ca->free[RESERVE_NONE]);
err_none_alloc:
free_fifo(&ca->free[RESERVE_MOVINGGC]);
err_movinggc_alloc:
free_fifo(&ca->free[RESERVE_PRIO]);
err_prio_alloc:
free_fifo(&ca->free[RESERVE_BTREE]);
err_btree_alloc:
err_free:
module_put(THIS_MODULE);
if (err)
pr_notice("error %s: %s", ca->cache_dev_name, err);
return ret;
}
static int register_cache(struct cache_sb *sb, struct page *sb_page,
struct block_device *bdev, struct cache *ca)
{
const char *err = NULL; /* must be set for any error case */
int ret = 0;
bdevname(bdev, ca->cache_dev_name);
memcpy(&ca->sb, sb, sizeof(struct cache_sb));
ca->bdev = bdev;
ca->bdev->bd_holder = ca;
bio_init(&ca->sb_bio, ca->sb_bio.bi_inline_vecs, 1);
bio_first_bvec_all(&ca->sb_bio)->bv_page = sb_page;
get_page(sb_page);
bcache: fix crashes in duplicate cache device register Kernel crashed when register a duplicate cache device, the call trace is bellow: [ 417.643790] CPU: 1 PID: 16886 Comm: bcache-register Tainted: G W OE 4.15.5-amd64-preempt-sysrq-20171018 #2 [ 417.643861] Hardware name: LENOVO 20ERCTO1WW/20ERCTO1WW, BIOS N1DET41W (1.15 ) 12/31/2015 [ 417.643870] RIP: 0010:bdevname+0x13/0x1e [ 417.643876] RSP: 0018:ffffa3aa9138fd38 EFLAGS: 00010282 [ 417.643884] RAX: 0000000000000000 RBX: ffff8c8f2f2f8000 RCX: ffffd6701f8 c7edf [ 417.643890] RDX: ffffa3aa9138fd88 RSI: ffffa3aa9138fd88 RDI: 00000000000 00000 [ 417.643895] RBP: ffffa3aa9138fde0 R08: ffffa3aa9138fae8 R09: 00000000000 1850e [ 417.643901] R10: ffff8c8eed34b271 R11: ffff8c8eed34b250 R12: 00000000000 00000 [ 417.643906] R13: ffffd6701f78f940 R14: ffff8c8f38f80000 R15: ffff8c8ea7d 90000 [ 417.643913] FS: 00007fde7e66f500(0000) GS:ffff8c8f61440000(0000) knlGS: 0000000000000000 [ 417.643919] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 417.643925] CR2: 0000000000000314 CR3: 00000007e6fa0001 CR4: 00000000003 606e0 [ 417.643931] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 00000000000 00000 [ 417.643938] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 00000000000 00400 [ 417.643946] Call Trace: [ 417.643978] register_bcache+0x1117/0x1270 [bcache] [ 417.643994] ? slab_pre_alloc_hook+0x15/0x3c [ 417.644001] ? slab_post_alloc_hook.isra.44+0xa/0x1a [ 417.644013] ? kernfs_fop_write+0xf6/0x138 [ 417.644020] kernfs_fop_write+0xf6/0x138 [ 417.644031] __vfs_write+0x31/0xcc [ 417.644043] ? current_kernel_time64+0x10/0x36 [ 417.644115] ? __audit_syscall_entry+0xbf/0xe3 [ 417.644124] vfs_write+0xa5/0xe2 [ 417.644133] SyS_write+0x5c/0x9f [ 417.644144] do_syscall_64+0x72/0x81 [ 417.644161] entry_SYSCALL_64_after_hwframe+0x3d/0xa2 [ 417.644169] RIP: 0033:0x7fde7e1c1974 [ 417.644175] RSP: 002b:00007fff13009a38 EFLAGS: 00000246 ORIG_RAX: 0000000 000000001 [ 417.644183] RAX: ffffffffffffffda RBX: 0000000001658280 RCX: 00007fde7e1c 1974 [ 417.644188] RDX: 000000000000000a RSI: 0000000001658280 RDI: 000000000000 0001 [ 417.644193] RBP: 000000000000000a R08: 0000000000000003 R09: 000000000000 0077 [ 417.644198] R10: 000000000000089e R11: 0000000000000246 R12: 000000000000 0001 [ 417.644203] R13: 000000000000000a R14: 7fffffffffffffff R15: 000000000000 0000 [ 417.644213] Code: c7 c2 83 6f ee 98 be 20 00 00 00 48 89 df e8 6c 27 3b 0 0 48 89 d8 5b c3 0f 1f 44 00 00 48 8b 47 70 48 89 f2 48 8b bf 80 00 00 00 <8 b> b0 14 03 00 00 e9 73 ff ff ff 0f 1f 44 00 00 48 8b 47 40 39 [ 417.644302] RIP: bdevname+0x13/0x1e RSP: ffffa3aa9138fd38 [ 417.644306] CR2: 0000000000000314 When registering duplicate cache device in register_cache(), after failure on calling register_cache_set(), bch_cache_release() will be called, then bdev will be freed, so bdevname(bdev, name) caused kernel crash. Since bch_cache_release() will free bdev, so in this patch we make sure bdev being freed if register_cache() fail, and do not free bdev again in register_bcache() when register_cache() fail. Signed-off-by: Tang Junhui <tang.junhui@zte.com.cn> Reported-by: Marc MERLIN <marc@merlins.org> Tested-by: Michael Lyle <mlyle@lyle.org> Reviewed-by: Michael Lyle <mlyle@lyle.org> Cc: <stable@vger.kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-03-05 21:41:54 +00:00
if (blk_queue_discard(bdev_get_queue(bdev)))
ca->discard = CACHE_DISCARD(&ca->sb);
ret = cache_alloc(ca);
if (ret != 0) {
bcache: fix crashes in duplicate cache device register Kernel crashed when register a duplicate cache device, the call trace is bellow: [ 417.643790] CPU: 1 PID: 16886 Comm: bcache-register Tainted: G W OE 4.15.5-amd64-preempt-sysrq-20171018 #2 [ 417.643861] Hardware name: LENOVO 20ERCTO1WW/20ERCTO1WW, BIOS N1DET41W (1.15 ) 12/31/2015 [ 417.643870] RIP: 0010:bdevname+0x13/0x1e [ 417.643876] RSP: 0018:ffffa3aa9138fd38 EFLAGS: 00010282 [ 417.643884] RAX: 0000000000000000 RBX: ffff8c8f2f2f8000 RCX: ffffd6701f8 c7edf [ 417.643890] RDX: ffffa3aa9138fd88 RSI: ffffa3aa9138fd88 RDI: 00000000000 00000 [ 417.643895] RBP: ffffa3aa9138fde0 R08: ffffa3aa9138fae8 R09: 00000000000 1850e [ 417.643901] R10: ffff8c8eed34b271 R11: ffff8c8eed34b250 R12: 00000000000 00000 [ 417.643906] R13: ffffd6701f78f940 R14: ffff8c8f38f80000 R15: ffff8c8ea7d 90000 [ 417.643913] FS: 00007fde7e66f500(0000) GS:ffff8c8f61440000(0000) knlGS: 0000000000000000 [ 417.643919] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 417.643925] CR2: 0000000000000314 CR3: 00000007e6fa0001 CR4: 00000000003 606e0 [ 417.643931] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 00000000000 00000 [ 417.643938] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 00000000000 00400 [ 417.643946] Call Trace: [ 417.643978] register_bcache+0x1117/0x1270 [bcache] [ 417.643994] ? slab_pre_alloc_hook+0x15/0x3c [ 417.644001] ? slab_post_alloc_hook.isra.44+0xa/0x1a [ 417.644013] ? kernfs_fop_write+0xf6/0x138 [ 417.644020] kernfs_fop_write+0xf6/0x138 [ 417.644031] __vfs_write+0x31/0xcc [ 417.644043] ? current_kernel_time64+0x10/0x36 [ 417.644115] ? __audit_syscall_entry+0xbf/0xe3 [ 417.644124] vfs_write+0xa5/0xe2 [ 417.644133] SyS_write+0x5c/0x9f [ 417.644144] do_syscall_64+0x72/0x81 [ 417.644161] entry_SYSCALL_64_after_hwframe+0x3d/0xa2 [ 417.644169] RIP: 0033:0x7fde7e1c1974 [ 417.644175] RSP: 002b:00007fff13009a38 EFLAGS: 00000246 ORIG_RAX: 0000000 000000001 [ 417.644183] RAX: ffffffffffffffda RBX: 0000000001658280 RCX: 00007fde7e1c 1974 [ 417.644188] RDX: 000000000000000a RSI: 0000000001658280 RDI: 000000000000 0001 [ 417.644193] RBP: 000000000000000a R08: 0000000000000003 R09: 000000000000 0077 [ 417.644198] R10: 000000000000089e R11: 0000000000000246 R12: 000000000000 0001 [ 417.644203] R13: 000000000000000a R14: 7fffffffffffffff R15: 000000000000 0000 [ 417.644213] Code: c7 c2 83 6f ee 98 be 20 00 00 00 48 89 df e8 6c 27 3b 0 0 48 89 d8 5b c3 0f 1f 44 00 00 48 8b 47 70 48 89 f2 48 8b bf 80 00 00 00 <8 b> b0 14 03 00 00 e9 73 ff ff ff 0f 1f 44 00 00 48 8b 47 40 39 [ 417.644302] RIP: bdevname+0x13/0x1e RSP: ffffa3aa9138fd38 [ 417.644306] CR2: 0000000000000314 When registering duplicate cache device in register_cache(), after failure on calling register_cache_set(), bch_cache_release() will be called, then bdev will be freed, so bdevname(bdev, name) caused kernel crash. Since bch_cache_release() will free bdev, so in this patch we make sure bdev being freed if register_cache() fail, and do not free bdev again in register_bcache() when register_cache() fail. Signed-off-by: Tang Junhui <tang.junhui@zte.com.cn> Reported-by: Marc MERLIN <marc@merlins.org> Tested-by: Michael Lyle <mlyle@lyle.org> Reviewed-by: Michael Lyle <mlyle@lyle.org> Cc: <stable@vger.kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-03-05 21:41:54 +00:00
blkdev_put(bdev, FMODE_READ|FMODE_WRITE|FMODE_EXCL);
if (ret == -ENOMEM)
err = "cache_alloc(): -ENOMEM";
else if (ret == -EPERM)
err = "cache_alloc(): cache device is too small";
else
err = "cache_alloc(): unknown error";
goto err;
}
if (kobject_add(&ca->kobj,
&part_to_dev(bdev->bd_part)->kobj,
"bcache")) {
err = "error calling kobject_add";
ret = -ENOMEM;
goto out;
}
mutex_lock(&bch_register_lock);
err = register_cache_set(ca);
mutex_unlock(&bch_register_lock);
if (err) {
ret = -ENODEV;
goto out;
}
pr_info("registered cache device %s", ca->cache_dev_name);
out:
kobject_put(&ca->kobj);
err:
if (err)
pr_notice("error %s: %s", ca->cache_dev_name, err);
return ret;
}
/* Global interfaces/init */
static ssize_t register_bcache(struct kobject *k, struct kobj_attribute *attr,
const char *buffer, size_t size);
kobj_attribute_write(register, register_bcache);
kobj_attribute_write(register_quiet, register_bcache);
static bool bch_is_open_backing(struct block_device *bdev)
{
struct cache_set *c, *tc;
struct cached_dev *dc, *t;
list_for_each_entry_safe(c, tc, &bch_cache_sets, list)
list_for_each_entry_safe(dc, t, &c->cached_devs, list)
if (dc->bdev == bdev)
return true;
list_for_each_entry_safe(dc, t, &uncached_devices, list)
if (dc->bdev == bdev)
return true;
return false;
}
static bool bch_is_open_cache(struct block_device *bdev)
{
struct cache_set *c, *tc;
struct cache *ca;
unsigned int i;
list_for_each_entry_safe(c, tc, &bch_cache_sets, list)
for_each_cache(ca, c, i)
if (ca->bdev == bdev)
return true;
return false;
}
static bool bch_is_open(struct block_device *bdev)
{
return bch_is_open_cache(bdev) || bch_is_open_backing(bdev);
}
static ssize_t register_bcache(struct kobject *k, struct kobj_attribute *attr,
const char *buffer, size_t size)
{
ssize_t ret = size;
const char *err = "cannot allocate memory";
char *path = NULL;
struct cache_sb *sb = NULL;
struct block_device *bdev = NULL;
struct page *sb_page = NULL;
if (!try_module_get(THIS_MODULE))
return -EBUSY;
path = kstrndup(buffer, size, GFP_KERNEL);
if (!path)
goto err;
sb = kmalloc(sizeof(struct cache_sb), GFP_KERNEL);
if (!sb)
goto err;
err = "failed to open device";
bdev = blkdev_get_by_path(strim(path),
FMODE_READ|FMODE_WRITE|FMODE_EXCL,
sb);
if (IS_ERR(bdev)) {
if (bdev == ERR_PTR(-EBUSY)) {
bdev = lookup_bdev(strim(path));
mutex_lock(&bch_register_lock);
if (!IS_ERR(bdev) && bch_is_open(bdev))
err = "device already registered";
else
err = "device busy";
mutex_unlock(&bch_register_lock);
if (!IS_ERR(bdev))
bdput(bdev);
if (attr == &ksysfs_register_quiet)
goto out;
}
goto err;
}
err = "failed to set blocksize";
if (set_blocksize(bdev, 4096))
goto err_close;
err = read_super(sb, bdev, &sb_page);
if (err)
goto err_close;
bcache: fix crashes in duplicate cache device register Kernel crashed when register a duplicate cache device, the call trace is bellow: [ 417.643790] CPU: 1 PID: 16886 Comm: bcache-register Tainted: G W OE 4.15.5-amd64-preempt-sysrq-20171018 #2 [ 417.643861] Hardware name: LENOVO 20ERCTO1WW/20ERCTO1WW, BIOS N1DET41W (1.15 ) 12/31/2015 [ 417.643870] RIP: 0010:bdevname+0x13/0x1e [ 417.643876] RSP: 0018:ffffa3aa9138fd38 EFLAGS: 00010282 [ 417.643884] RAX: 0000000000000000 RBX: ffff8c8f2f2f8000 RCX: ffffd6701f8 c7edf [ 417.643890] RDX: ffffa3aa9138fd88 RSI: ffffa3aa9138fd88 RDI: 00000000000 00000 [ 417.643895] RBP: ffffa3aa9138fde0 R08: ffffa3aa9138fae8 R09: 00000000000 1850e [ 417.643901] R10: ffff8c8eed34b271 R11: ffff8c8eed34b250 R12: 00000000000 00000 [ 417.643906] R13: ffffd6701f78f940 R14: ffff8c8f38f80000 R15: ffff8c8ea7d 90000 [ 417.643913] FS: 00007fde7e66f500(0000) GS:ffff8c8f61440000(0000) knlGS: 0000000000000000 [ 417.643919] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 417.643925] CR2: 0000000000000314 CR3: 00000007e6fa0001 CR4: 00000000003 606e0 [ 417.643931] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 00000000000 00000 [ 417.643938] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 00000000000 00400 [ 417.643946] Call Trace: [ 417.643978] register_bcache+0x1117/0x1270 [bcache] [ 417.643994] ? slab_pre_alloc_hook+0x15/0x3c [ 417.644001] ? slab_post_alloc_hook.isra.44+0xa/0x1a [ 417.644013] ? kernfs_fop_write+0xf6/0x138 [ 417.644020] kernfs_fop_write+0xf6/0x138 [ 417.644031] __vfs_write+0x31/0xcc [ 417.644043] ? current_kernel_time64+0x10/0x36 [ 417.644115] ? __audit_syscall_entry+0xbf/0xe3 [ 417.644124] vfs_write+0xa5/0xe2 [ 417.644133] SyS_write+0x5c/0x9f [ 417.644144] do_syscall_64+0x72/0x81 [ 417.644161] entry_SYSCALL_64_after_hwframe+0x3d/0xa2 [ 417.644169] RIP: 0033:0x7fde7e1c1974 [ 417.644175] RSP: 002b:00007fff13009a38 EFLAGS: 00000246 ORIG_RAX: 0000000 000000001 [ 417.644183] RAX: ffffffffffffffda RBX: 0000000001658280 RCX: 00007fde7e1c 1974 [ 417.644188] RDX: 000000000000000a RSI: 0000000001658280 RDI: 000000000000 0001 [ 417.644193] RBP: 000000000000000a R08: 0000000000000003 R09: 000000000000 0077 [ 417.644198] R10: 000000000000089e R11: 0000000000000246 R12: 000000000000 0001 [ 417.644203] R13: 000000000000000a R14: 7fffffffffffffff R15: 000000000000 0000 [ 417.644213] Code: c7 c2 83 6f ee 98 be 20 00 00 00 48 89 df e8 6c 27 3b 0 0 48 89 d8 5b c3 0f 1f 44 00 00 48 8b 47 70 48 89 f2 48 8b bf 80 00 00 00 <8 b> b0 14 03 00 00 e9 73 ff ff ff 0f 1f 44 00 00 48 8b 47 40 39 [ 417.644302] RIP: bdevname+0x13/0x1e RSP: ffffa3aa9138fd38 [ 417.644306] CR2: 0000000000000314 When registering duplicate cache device in register_cache(), after failure on calling register_cache_set(), bch_cache_release() will be called, then bdev will be freed, so bdevname(bdev, name) caused kernel crash. Since bch_cache_release() will free bdev, so in this patch we make sure bdev being freed if register_cache() fail, and do not free bdev again in register_bcache() when register_cache() fail. Signed-off-by: Tang Junhui <tang.junhui@zte.com.cn> Reported-by: Marc MERLIN <marc@merlins.org> Tested-by: Michael Lyle <mlyle@lyle.org> Reviewed-by: Michael Lyle <mlyle@lyle.org> Cc: <stable@vger.kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-03-05 21:41:54 +00:00
err = "failed to register device";
if (SB_IS_BDEV(sb)) {
struct cached_dev *dc = kzalloc(sizeof(*dc), GFP_KERNEL);
if (!dc)
goto err_close;
mutex_lock(&bch_register_lock);
register_bdev(sb, sb_page, bdev, dc);
mutex_unlock(&bch_register_lock);
} else {
struct cache *ca = kzalloc(sizeof(*ca), GFP_KERNEL);
if (!ca)
goto err_close;
if (register_cache(sb, sb_page, bdev, ca) != 0)
bcache: fix crashes in duplicate cache device register Kernel crashed when register a duplicate cache device, the call trace is bellow: [ 417.643790] CPU: 1 PID: 16886 Comm: bcache-register Tainted: G W OE 4.15.5-amd64-preempt-sysrq-20171018 #2 [ 417.643861] Hardware name: LENOVO 20ERCTO1WW/20ERCTO1WW, BIOS N1DET41W (1.15 ) 12/31/2015 [ 417.643870] RIP: 0010:bdevname+0x13/0x1e [ 417.643876] RSP: 0018:ffffa3aa9138fd38 EFLAGS: 00010282 [ 417.643884] RAX: 0000000000000000 RBX: ffff8c8f2f2f8000 RCX: ffffd6701f8 c7edf [ 417.643890] RDX: ffffa3aa9138fd88 RSI: ffffa3aa9138fd88 RDI: 00000000000 00000 [ 417.643895] RBP: ffffa3aa9138fde0 R08: ffffa3aa9138fae8 R09: 00000000000 1850e [ 417.643901] R10: ffff8c8eed34b271 R11: ffff8c8eed34b250 R12: 00000000000 00000 [ 417.643906] R13: ffffd6701f78f940 R14: ffff8c8f38f80000 R15: ffff8c8ea7d 90000 [ 417.643913] FS: 00007fde7e66f500(0000) GS:ffff8c8f61440000(0000) knlGS: 0000000000000000 [ 417.643919] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 417.643925] CR2: 0000000000000314 CR3: 00000007e6fa0001 CR4: 00000000003 606e0 [ 417.643931] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 00000000000 00000 [ 417.643938] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 00000000000 00400 [ 417.643946] Call Trace: [ 417.643978] register_bcache+0x1117/0x1270 [bcache] [ 417.643994] ? slab_pre_alloc_hook+0x15/0x3c [ 417.644001] ? slab_post_alloc_hook.isra.44+0xa/0x1a [ 417.644013] ? kernfs_fop_write+0xf6/0x138 [ 417.644020] kernfs_fop_write+0xf6/0x138 [ 417.644031] __vfs_write+0x31/0xcc [ 417.644043] ? current_kernel_time64+0x10/0x36 [ 417.644115] ? __audit_syscall_entry+0xbf/0xe3 [ 417.644124] vfs_write+0xa5/0xe2 [ 417.644133] SyS_write+0x5c/0x9f [ 417.644144] do_syscall_64+0x72/0x81 [ 417.644161] entry_SYSCALL_64_after_hwframe+0x3d/0xa2 [ 417.644169] RIP: 0033:0x7fde7e1c1974 [ 417.644175] RSP: 002b:00007fff13009a38 EFLAGS: 00000246 ORIG_RAX: 0000000 000000001 [ 417.644183] RAX: ffffffffffffffda RBX: 0000000001658280 RCX: 00007fde7e1c 1974 [ 417.644188] RDX: 000000000000000a RSI: 0000000001658280 RDI: 000000000000 0001 [ 417.644193] RBP: 000000000000000a R08: 0000000000000003 R09: 000000000000 0077 [ 417.644198] R10: 000000000000089e R11: 0000000000000246 R12: 000000000000 0001 [ 417.644203] R13: 000000000000000a R14: 7fffffffffffffff R15: 000000000000 0000 [ 417.644213] Code: c7 c2 83 6f ee 98 be 20 00 00 00 48 89 df e8 6c 27 3b 0 0 48 89 d8 5b c3 0f 1f 44 00 00 48 8b 47 70 48 89 f2 48 8b bf 80 00 00 00 <8 b> b0 14 03 00 00 e9 73 ff ff ff 0f 1f 44 00 00 48 8b 47 40 39 [ 417.644302] RIP: bdevname+0x13/0x1e RSP: ffffa3aa9138fd38 [ 417.644306] CR2: 0000000000000314 When registering duplicate cache device in register_cache(), after failure on calling register_cache_set(), bch_cache_release() will be called, then bdev will be freed, so bdevname(bdev, name) caused kernel crash. Since bch_cache_release() will free bdev, so in this patch we make sure bdev being freed if register_cache() fail, and do not free bdev again in register_bcache() when register_cache() fail. Signed-off-by: Tang Junhui <tang.junhui@zte.com.cn> Reported-by: Marc MERLIN <marc@merlins.org> Tested-by: Michael Lyle <mlyle@lyle.org> Reviewed-by: Michael Lyle <mlyle@lyle.org> Cc: <stable@vger.kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-03-05 21:41:54 +00:00
goto err;
}
out:
if (sb_page)
put_page(sb_page);
kfree(sb);
kfree(path);
module_put(THIS_MODULE);
return ret;
err_close:
blkdev_put(bdev, FMODE_READ|FMODE_WRITE|FMODE_EXCL);
err:
bcache: fix crashes in duplicate cache device register Kernel crashed when register a duplicate cache device, the call trace is bellow: [ 417.643790] CPU: 1 PID: 16886 Comm: bcache-register Tainted: G W OE 4.15.5-amd64-preempt-sysrq-20171018 #2 [ 417.643861] Hardware name: LENOVO 20ERCTO1WW/20ERCTO1WW, BIOS N1DET41W (1.15 ) 12/31/2015 [ 417.643870] RIP: 0010:bdevname+0x13/0x1e [ 417.643876] RSP: 0018:ffffa3aa9138fd38 EFLAGS: 00010282 [ 417.643884] RAX: 0000000000000000 RBX: ffff8c8f2f2f8000 RCX: ffffd6701f8 c7edf [ 417.643890] RDX: ffffa3aa9138fd88 RSI: ffffa3aa9138fd88 RDI: 00000000000 00000 [ 417.643895] RBP: ffffa3aa9138fde0 R08: ffffa3aa9138fae8 R09: 00000000000 1850e [ 417.643901] R10: ffff8c8eed34b271 R11: ffff8c8eed34b250 R12: 00000000000 00000 [ 417.643906] R13: ffffd6701f78f940 R14: ffff8c8f38f80000 R15: ffff8c8ea7d 90000 [ 417.643913] FS: 00007fde7e66f500(0000) GS:ffff8c8f61440000(0000) knlGS: 0000000000000000 [ 417.643919] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 417.643925] CR2: 0000000000000314 CR3: 00000007e6fa0001 CR4: 00000000003 606e0 [ 417.643931] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 00000000000 00000 [ 417.643938] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 00000000000 00400 [ 417.643946] Call Trace: [ 417.643978] register_bcache+0x1117/0x1270 [bcache] [ 417.643994] ? slab_pre_alloc_hook+0x15/0x3c [ 417.644001] ? slab_post_alloc_hook.isra.44+0xa/0x1a [ 417.644013] ? kernfs_fop_write+0xf6/0x138 [ 417.644020] kernfs_fop_write+0xf6/0x138 [ 417.644031] __vfs_write+0x31/0xcc [ 417.644043] ? current_kernel_time64+0x10/0x36 [ 417.644115] ? __audit_syscall_entry+0xbf/0xe3 [ 417.644124] vfs_write+0xa5/0xe2 [ 417.644133] SyS_write+0x5c/0x9f [ 417.644144] do_syscall_64+0x72/0x81 [ 417.644161] entry_SYSCALL_64_after_hwframe+0x3d/0xa2 [ 417.644169] RIP: 0033:0x7fde7e1c1974 [ 417.644175] RSP: 002b:00007fff13009a38 EFLAGS: 00000246 ORIG_RAX: 0000000 000000001 [ 417.644183] RAX: ffffffffffffffda RBX: 0000000001658280 RCX: 00007fde7e1c 1974 [ 417.644188] RDX: 000000000000000a RSI: 0000000001658280 RDI: 000000000000 0001 [ 417.644193] RBP: 000000000000000a R08: 0000000000000003 R09: 000000000000 0077 [ 417.644198] R10: 000000000000089e R11: 0000000000000246 R12: 000000000000 0001 [ 417.644203] R13: 000000000000000a R14: 7fffffffffffffff R15: 000000000000 0000 [ 417.644213] Code: c7 c2 83 6f ee 98 be 20 00 00 00 48 89 df e8 6c 27 3b 0 0 48 89 d8 5b c3 0f 1f 44 00 00 48 8b 47 70 48 89 f2 48 8b bf 80 00 00 00 <8 b> b0 14 03 00 00 e9 73 ff ff ff 0f 1f 44 00 00 48 8b 47 40 39 [ 417.644302] RIP: bdevname+0x13/0x1e RSP: ffffa3aa9138fd38 [ 417.644306] CR2: 0000000000000314 When registering duplicate cache device in register_cache(), after failure on calling register_cache_set(), bch_cache_release() will be called, then bdev will be freed, so bdevname(bdev, name) caused kernel crash. Since bch_cache_release() will free bdev, so in this patch we make sure bdev being freed if register_cache() fail, and do not free bdev again in register_bcache() when register_cache() fail. Signed-off-by: Tang Junhui <tang.junhui@zte.com.cn> Reported-by: Marc MERLIN <marc@merlins.org> Tested-by: Michael Lyle <mlyle@lyle.org> Reviewed-by: Michael Lyle <mlyle@lyle.org> Cc: <stable@vger.kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-03-05 21:41:54 +00:00
pr_info("error %s: %s", path, err);
ret = -EINVAL;
goto out;
}
static int bcache_reboot(struct notifier_block *n, unsigned long code, void *x)
{
if (code == SYS_DOWN ||
code == SYS_HALT ||
code == SYS_POWER_OFF) {
DEFINE_WAIT(wait);
unsigned long start = jiffies;
bool stopped = false;
struct cache_set *c, *tc;
struct cached_dev *dc, *tdc;
mutex_lock(&bch_register_lock);
if (list_empty(&bch_cache_sets) &&
list_empty(&uncached_devices))
goto out;
pr_info("Stopping all devices:");
list_for_each_entry_safe(c, tc, &bch_cache_sets, list)
bch_cache_set_stop(c);
list_for_each_entry_safe(dc, tdc, &uncached_devices, list)
bcache_device_stop(&dc->disk);
/* What's a condition variable? */
while (1) {
long timeout = start + 2 * HZ - jiffies;
stopped = list_empty(&bch_cache_sets) &&
list_empty(&uncached_devices);
if (timeout < 0 || stopped)
break;
prepare_to_wait(&unregister_wait, &wait,
TASK_UNINTERRUPTIBLE);
mutex_unlock(&bch_register_lock);
schedule_timeout(timeout);
mutex_lock(&bch_register_lock);
}
finish_wait(&unregister_wait, &wait);
if (stopped)
pr_info("All devices stopped");
else
pr_notice("Timeout waiting for devices to be closed");
out:
mutex_unlock(&bch_register_lock);
}
return NOTIFY_DONE;
}
static struct notifier_block reboot = {
.notifier_call = bcache_reboot,
.priority = INT_MAX, /* before any real devices */
};
static void bcache_exit(void)
{
bch_debug_exit();
bch_request_exit();
if (bcache_kobj)
kobject_put(bcache_kobj);
if (bcache_wq)
destroy_workqueue(bcache_wq);
if (bch_journal_wq)
destroy_workqueue(bch_journal_wq);
if (bcache_major)
unregister_blkdev(bcache_major, "bcache");
unregister_reboot_notifier(&reboot);
mutex_destroy(&bch_register_lock);
}
/* Check and fixup module parameters */
static void check_module_parameters(void)
{
if (bch_cutoff_writeback_sync == 0)
bch_cutoff_writeback_sync = CUTOFF_WRITEBACK_SYNC;
else if (bch_cutoff_writeback_sync > CUTOFF_WRITEBACK_SYNC_MAX) {
pr_warn("set bch_cutoff_writeback_sync (%u) to max value %u",
bch_cutoff_writeback_sync, CUTOFF_WRITEBACK_SYNC_MAX);
bch_cutoff_writeback_sync = CUTOFF_WRITEBACK_SYNC_MAX;
}
if (bch_cutoff_writeback == 0)
bch_cutoff_writeback = CUTOFF_WRITEBACK;
else if (bch_cutoff_writeback > CUTOFF_WRITEBACK_MAX) {
pr_warn("set bch_cutoff_writeback (%u) to max value %u",
bch_cutoff_writeback, CUTOFF_WRITEBACK_MAX);
bch_cutoff_writeback = CUTOFF_WRITEBACK_MAX;
}
if (bch_cutoff_writeback > bch_cutoff_writeback_sync) {
pr_warn("set bch_cutoff_writeback (%u) to %u",
bch_cutoff_writeback, bch_cutoff_writeback_sync);
bch_cutoff_writeback = bch_cutoff_writeback_sync;
}
}
static int __init bcache_init(void)
{
static const struct attribute *files[] = {
&ksysfs_register.attr,
&ksysfs_register_quiet.attr,
NULL
};
check_module_parameters();
mutex_init(&bch_register_lock);
init_waitqueue_head(&unregister_wait);
register_reboot_notifier(&reboot);
bcache_major = register_blkdev(0, "bcache");
if (bcache_major < 0) {
unregister_reboot_notifier(&reboot);
mutex_destroy(&bch_register_lock);
return bcache_major;
}
bcache_wq = alloc_workqueue("bcache", WQ_MEM_RECLAIM, 0);
if (!bcache_wq)
goto err;
bch_journal_wq = alloc_workqueue("bch_journal", WQ_MEM_RECLAIM, 0);
if (!bch_journal_wq)
goto err;
bcache_kobj = kobject_create_and_add("bcache", fs_kobj);
if (!bcache_kobj)
goto err;
if (bch_request_init() ||
sysfs_create_files(bcache_kobj, files))
goto err;
bch_debug_init();
closure_debug_init();
return 0;
err:
bcache_exit();
return -ENOMEM;
}
/*
* Module hooks
*/
module_exit(bcache_exit);
module_init(bcache_init);
module_param(bch_cutoff_writeback, uint, 0);
MODULE_PARM_DESC(bch_cutoff_writeback, "threshold to cutoff writeback");
module_param(bch_cutoff_writeback_sync, uint, 0);
MODULE_PARM_DESC(bch_cutoff_writeback_sync, "hard threshold to cutoff writeback");
MODULE_DESCRIPTION("Bcache: a Linux block layer cache");
MODULE_AUTHOR("Kent Overstreet <kent.overstreet@gmail.com>");
MODULE_LICENSE("GPL");