2019-05-19 13:51:48 +00:00
|
|
|
// SPDX-License-Identifier: GPL-2.0-or-later
|
2005-04-16 22:20:36 +00:00
|
|
|
/*
|
|
|
|
* sata_sx4.c - Promise SATA
|
|
|
|
*
|
2013-05-14 18:09:50 +00:00
|
|
|
* Maintained by: Tejun Heo <tj@kernel.org>
|
2005-04-16 22:20:36 +00:00
|
|
|
* Please ALWAYS copy linux-ide@vger.kernel.org
|
|
|
|
* on emails.
|
|
|
|
*
|
|
|
|
* Copyright 2003-2004 Red Hat, Inc.
|
|
|
|
*
|
2005-08-29 00:18:39 +00:00
|
|
|
* libata documentation is available via 'make {ps|pdf}docs',
|
2017-05-14 14:52:56 +00:00
|
|
|
* as Documentation/driver-api/libata.rst
|
2005-08-29 00:18:39 +00:00
|
|
|
*
|
|
|
|
* Hardware documentation available under NDA.
|
2005-04-16 22:20:36 +00:00
|
|
|
*/
|
|
|
|
|
2007-05-28 12:17:06 +00:00
|
|
|
/*
|
|
|
|
Theory of operation
|
|
|
|
-------------------
|
|
|
|
|
|
|
|
The SX4 (PDC20621) chip features a single Host DMA (HDMA) copy
|
|
|
|
engine, DIMM memory, and four ATA engines (one per SATA port).
|
|
|
|
Data is copied to/from DIMM memory by the HDMA engine, before
|
|
|
|
handing off to one (or more) of the ATA engines. The ATA
|
|
|
|
engines operate solely on DIMM memory.
|
|
|
|
|
|
|
|
The SX4 behaves like a PATA chip, with no SATA controls or
|
|
|
|
knowledge whatsoever, leading to the presumption that
|
|
|
|
PATA<->SATA bridges exist on SX4 boards, external to the
|
|
|
|
PDC20621 chip itself.
|
|
|
|
|
|
|
|
The chip is quite capable, supporting an XOR engine and linked
|
|
|
|
hardware commands (permits a string to transactions to be
|
|
|
|
submitted and waited-on as a single unit), and an optional
|
|
|
|
microprocessor.
|
|
|
|
|
|
|
|
The limiting factor is largely software. This Linux driver was
|
|
|
|
written to multiplex the single HDMA engine to copy disk
|
|
|
|
transactions into a fixed DIMM memory space, from where an ATA
|
|
|
|
engine takes over. As a result, each WRITE looks like this:
|
|
|
|
|
|
|
|
submit HDMA packet to hardware
|
|
|
|
hardware copies data from system memory to DIMM
|
|
|
|
hardware raises interrupt
|
|
|
|
|
|
|
|
submit ATA packet to hardware
|
|
|
|
hardware executes ATA WRITE command, w/ data in DIMM
|
|
|
|
hardware raises interrupt
|
2007-10-19 10:42:56 +00:00
|
|
|
|
2007-05-28 12:17:06 +00:00
|
|
|
and each READ looks like this:
|
|
|
|
|
|
|
|
submit ATA packet to hardware
|
|
|
|
hardware executes ATA READ command, w/ data in DIMM
|
|
|
|
hardware raises interrupt
|
2007-10-19 10:42:56 +00:00
|
|
|
|
2007-05-28 12:17:06 +00:00
|
|
|
submit HDMA packet to hardware
|
|
|
|
hardware copies data from DIMM to system memory
|
|
|
|
hardware raises interrupt
|
|
|
|
|
|
|
|
This is a very slow, lock-step way of doing things that can
|
|
|
|
certainly be improved by motivated kernel hackers.
|
|
|
|
|
|
|
|
*/
|
|
|
|
|
2005-04-16 22:20:36 +00:00
|
|
|
#include <linux/kernel.h>
|
|
|
|
#include <linux/module.h>
|
|
|
|
#include <linux/pci.h>
|
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files. percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.
percpu.h -> slab.h dependency is about to be removed. Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability. As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.
http://userweb.kernel.org/~tj/misc/slabh-sweep.py
The script does the followings.
* Scan files for gfp and slab usages and update includes such that
only the necessary includes are there. ie. if only gfp is used,
gfp.h, if slab is used, slab.h.
* When the script inserts a new include, it looks at the include
blocks and try to put the new include such that its order conforms
to its surrounding. It's put in the include block which contains
core kernel includes, in the same order that the rest are ordered -
alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
doesn't seem to be any matching order.
* If the script can't find a place to put a new include (mostly
because the file doesn't have fitting include block), it prints out
an error message indicating which .h file needs to be added to the
file.
The conversion was done in the following steps.
1. The initial automatic conversion of all .c files updated slightly
over 4000 files, deleting around 700 includes and adding ~480 gfp.h
and ~3000 slab.h inclusions. The script emitted errors for ~400
files.
2. Each error was manually checked. Some didn't need the inclusion,
some needed manual addition while adding it to implementation .h or
embedding .c file was more appropriate for others. This step added
inclusions to around 150 files.
3. The script was run again and the output was compared to the edits
from #2 to make sure no file was left behind.
4. Several build tests were done and a couple of problems were fixed.
e.g. lib/decompress_*.c used malloc/free() wrappers around slab
APIs requiring slab.h to be added manually.
5. The script was run on all .h files but without automatically
editing them as sprinkling gfp.h and slab.h inclusions around .h
files could easily lead to inclusion dependency hell. Most gfp.h
inclusion directives were ignored as stuff from gfp.h was usually
wildly available and often used in preprocessor macros. Each
slab.h inclusion directive was examined and added manually as
necessary.
6. percpu.h was updated not to include slab.h.
7. Build test were done on the following configurations and failures
were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my
distributed build env didn't work with gcov compiles) and a few
more options had to be turned off depending on archs to make things
build (like ipr on powerpc/64 which failed due to missing writeq).
* x86 and x86_64 UP and SMP allmodconfig and a custom test config.
* powerpc and powerpc64 SMP allmodconfig
* sparc and sparc64 SMP allmodconfig
* ia64 SMP allmodconfig
* s390 SMP allmodconfig
* alpha SMP allmodconfig
* um on x86_64 SMP allmodconfig
8. percpu.h modifications were reverted so that it could be applied as
a separate patch and serve as bisection point.
Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.
Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 08:04:11 +00:00
|
|
|
#include <linux/slab.h>
|
2005-04-16 22:20:36 +00:00
|
|
|
#include <linux/blkdev.h>
|
|
|
|
#include <linux/delay.h>
|
|
|
|
#include <linux/interrupt.h>
|
2005-10-30 19:39:11 +00:00
|
|
|
#include <linux/device.h>
|
2005-04-16 22:20:36 +00:00
|
|
|
#include <scsi/scsi_host.h>
|
2005-11-07 05:59:37 +00:00
|
|
|
#include <scsi/scsi_cmnd.h>
|
2005-04-16 22:20:36 +00:00
|
|
|
#include <linux/libata.h>
|
|
|
|
#include "sata_promise.h"
|
|
|
|
|
|
|
|
#define DRV_NAME "sata_sx4"
|
2007-08-31 08:54:06 +00:00
|
|
|
#define DRV_VERSION "0.12"
|
2005-04-16 22:20:36 +00:00
|
|
|
|
2021-12-21 07:21:00 +00:00
|
|
|
static int dimm_test;
|
|
|
|
module_param(dimm_test, int, 0644);
|
|
|
|
MODULE_PARM_DESC(dimm_test, "Enable DIMM test during startup (1 = enabled)");
|
2005-04-16 22:20:36 +00:00
|
|
|
|
|
|
|
enum {
|
2007-02-01 06:06:36 +00:00
|
|
|
PDC_MMIO_BAR = 3,
|
|
|
|
PDC_DIMM_BAR = 4,
|
|
|
|
|
2005-04-16 22:20:36 +00:00
|
|
|
PDC_PRD_TBL = 0x44, /* Direct command DMA table addr */
|
|
|
|
|
|
|
|
PDC_PKT_SUBMIT = 0x40, /* Command packet pointer addr */
|
|
|
|
PDC_HDMA_PKT_SUBMIT = 0x100, /* Host DMA packet pointer addr */
|
|
|
|
PDC_INT_SEQMASK = 0x40, /* Mask of asserted SEQ INTs */
|
|
|
|
PDC_HDMA_CTLSTAT = 0x12C, /* Host DMA control / status */
|
|
|
|
|
2007-05-28 12:17:06 +00:00
|
|
|
PDC_CTLSTAT = 0x60, /* IDEn control / status */
|
|
|
|
|
2005-04-16 22:20:36 +00:00
|
|
|
PDC_20621_SEQCTL = 0x400,
|
|
|
|
PDC_20621_SEQMASK = 0x480,
|
|
|
|
PDC_20621_GENERAL_CTL = 0x484,
|
|
|
|
PDC_20621_PAGE_SIZE = (32 * 1024),
|
|
|
|
|
|
|
|
/* chosen, not constant, values; we design our own DIMM mem map */
|
|
|
|
PDC_20621_DIMM_WINDOW = 0x0C, /* page# for 32K DIMM window */
|
|
|
|
PDC_20621_DIMM_BASE = 0x00200000,
|
|
|
|
PDC_20621_DIMM_DATA = (64 * 1024),
|
|
|
|
PDC_DIMM_DATA_STEP = (256 * 1024),
|
|
|
|
PDC_DIMM_WINDOW_STEP = (8 * 1024),
|
|
|
|
PDC_DIMM_HOST_PRD = (6 * 1024),
|
|
|
|
PDC_DIMM_HOST_PKT = (128 * 0),
|
|
|
|
PDC_DIMM_HPKT_PRD = (128 * 1),
|
|
|
|
PDC_DIMM_ATA_PKT = (128 * 2),
|
|
|
|
PDC_DIMM_APKT_PRD = (128 * 3),
|
|
|
|
PDC_DIMM_HEADER_SZ = PDC_DIMM_APKT_PRD + 128,
|
|
|
|
PDC_PAGE_WINDOW = 0x40,
|
|
|
|
PDC_PAGE_DATA = PDC_PAGE_WINDOW +
|
|
|
|
(PDC_20621_DIMM_DATA / PDC_20621_PAGE_SIZE),
|
|
|
|
PDC_PAGE_SET = PDC_DIMM_DATA_STEP / PDC_20621_PAGE_SIZE,
|
|
|
|
|
|
|
|
PDC_CHIP0_OFS = 0xC0000, /* offset of chip #0 */
|
|
|
|
|
|
|
|
PDC_20621_ERR_MASK = (1<<19) | (1<<20) | (1<<21) | (1<<22) |
|
|
|
|
(1<<23),
|
|
|
|
|
|
|
|
board_20621 = 0, /* FastTrak S150 SX4 */
|
|
|
|
|
2007-05-28 02:58:54 +00:00
|
|
|
PDC_MASK_INT = (1 << 10), /* HDMA/ATA mask int */
|
|
|
|
PDC_RESET = (1 << 11), /* HDMA/ATA reset */
|
2007-05-28 12:17:06 +00:00
|
|
|
PDC_DMA_ENABLE = (1 << 7), /* DMA start/stop */
|
2005-04-16 22:20:36 +00:00
|
|
|
|
|
|
|
PDC_MAX_HDMA = 32,
|
|
|
|
PDC_HDMA_Q_MASK = (PDC_MAX_HDMA - 1),
|
|
|
|
|
2007-05-28 02:58:54 +00:00
|
|
|
PDC_DIMM0_SPD_DEV_ADDRESS = 0x50,
|
|
|
|
PDC_DIMM1_SPD_DEV_ADDRESS = 0x51,
|
|
|
|
PDC_I2C_CONTROL = 0x48,
|
|
|
|
PDC_I2C_ADDR_DATA = 0x4C,
|
|
|
|
PDC_DIMM0_CONTROL = 0x80,
|
|
|
|
PDC_DIMM1_CONTROL = 0x84,
|
|
|
|
PDC_SDRAM_CONTROL = 0x88,
|
|
|
|
PDC_I2C_WRITE = 0, /* master -> slave */
|
|
|
|
PDC_I2C_READ = (1 << 6), /* master <- slave */
|
|
|
|
PDC_I2C_START = (1 << 7), /* start I2C proto */
|
|
|
|
PDC_I2C_MASK_INT = (1 << 5), /* mask I2C interrupt */
|
|
|
|
PDC_I2C_COMPLETE = (1 << 16), /* I2C normal compl. */
|
|
|
|
PDC_I2C_NO_ACK = (1 << 20), /* slave no-ack addr */
|
|
|
|
PDC_DIMM_SPD_SUBADDRESS_START = 0x00,
|
|
|
|
PDC_DIMM_SPD_SUBADDRESS_END = 0x7F,
|
|
|
|
PDC_DIMM_SPD_ROW_NUM = 3,
|
|
|
|
PDC_DIMM_SPD_COLUMN_NUM = 4,
|
|
|
|
PDC_DIMM_SPD_MODULE_ROW = 5,
|
|
|
|
PDC_DIMM_SPD_TYPE = 11,
|
|
|
|
PDC_DIMM_SPD_FRESH_RATE = 12,
|
|
|
|
PDC_DIMM_SPD_BANK_NUM = 17,
|
|
|
|
PDC_DIMM_SPD_CAS_LATENCY = 18,
|
|
|
|
PDC_DIMM_SPD_ATTRIBUTE = 21,
|
|
|
|
PDC_DIMM_SPD_ROW_PRE_CHARGE = 27,
|
|
|
|
PDC_DIMM_SPD_ROW_ACTIVE_DELAY = 28,
|
|
|
|
PDC_DIMM_SPD_RAS_CAS_DELAY = 29,
|
|
|
|
PDC_DIMM_SPD_ACTIVE_PRECHARGE = 30,
|
|
|
|
PDC_DIMM_SPD_SYSTEM_FREQ = 126,
|
|
|
|
PDC_CTL_STATUS = 0x08,
|
|
|
|
PDC_DIMM_WINDOW_CTLR = 0x0C,
|
|
|
|
PDC_TIME_CONTROL = 0x3C,
|
|
|
|
PDC_TIME_PERIOD = 0x40,
|
|
|
|
PDC_TIME_COUNTER = 0x44,
|
|
|
|
PDC_GENERAL_CTLR = 0x484,
|
|
|
|
PCI_PLL_INIT = 0x8A531824,
|
|
|
|
PCI_X_TCOUNT = 0xEE1E5CFF,
|
|
|
|
|
|
|
|
/* PDC_TIME_CONTROL bits */
|
|
|
|
PDC_TIMER_BUZZER = (1 << 10),
|
|
|
|
PDC_TIMER_MODE_PERIODIC = 0, /* bits 9:8 == 00 */
|
|
|
|
PDC_TIMER_MODE_ONCE = (1 << 8), /* bits 9:8 == 01 */
|
|
|
|
PDC_TIMER_ENABLE = (1 << 7),
|
|
|
|
PDC_TIMER_MASK_INT = (1 << 5),
|
|
|
|
PDC_TIMER_SEQ_MASK = 0x1f, /* SEQ ID for timer */
|
|
|
|
PDC_TIMER_DEFAULT = PDC_TIMER_MODE_ONCE |
|
|
|
|
PDC_TIMER_ENABLE |
|
|
|
|
PDC_TIMER_MASK_INT,
|
2005-04-16 22:20:36 +00:00
|
|
|
};
|
|
|
|
|
2009-04-14 20:00:54 +00:00
|
|
|
#define ECC_ERASE_BUF_SZ (128 * 1024)
|
2005-04-16 22:20:36 +00:00
|
|
|
|
|
|
|
struct pdc_port_priv {
|
|
|
|
u8 dimm_buf[(ATA_PRD_SZ * ATA_MAX_PRD) + 512];
|
|
|
|
u8 *pkt;
|
|
|
|
dma_addr_t pkt_dma;
|
|
|
|
};
|
|
|
|
|
|
|
|
struct pdc_host_priv {
|
|
|
|
unsigned int doing_hdma;
|
|
|
|
unsigned int hdma_prod;
|
|
|
|
unsigned int hdma_cons;
|
|
|
|
struct {
|
|
|
|
struct ata_queued_cmd *qc;
|
|
|
|
unsigned int seq;
|
|
|
|
unsigned long pkt_ofs;
|
|
|
|
} hdma[32];
|
|
|
|
};
|
|
|
|
|
|
|
|
|
2007-10-26 04:03:37 +00:00
|
|
|
static int pdc_sata_init_one(struct pci_dev *pdev, const struct pci_device_id *ent);
|
2009-04-08 20:02:18 +00:00
|
|
|
static void pdc_error_handler(struct ata_port *ap);
|
|
|
|
static void pdc_freeze(struct ata_port *ap);
|
|
|
|
static void pdc_thaw(struct ata_port *ap);
|
2005-04-16 22:20:36 +00:00
|
|
|
static int pdc_port_start(struct ata_port *ap);
|
2019-10-31 09:59:45 +00:00
|
|
|
static enum ata_completion_errors pdc20621_qc_prep(struct ata_queued_cmd *qc);
|
2005-10-22 18:27:05 +00:00
|
|
|
static void pdc_tf_load_mmio(struct ata_port *ap, const struct ata_taskfile *tf);
|
|
|
|
static void pdc_exec_command_mmio(struct ata_port *ap, const struct ata_taskfile *tf);
|
libata: convert the remaining SATA drivers to new init model
Convert ahci, sata_sil, sata_sil24, sata_svw, sata_qstor, sata_mv,
sata_sx4, sata_vsc and sata_inic162x to new init model.
Now that host and ap are available during intialization, functions are
converted to take either host or ap instead of low level parameters
which were inevitable for functions shared between init and other
paths. This simplifies code quite a bit.
* init_one()'s now follow more consistent init order
* ahci_setup_port() and ahci_host_init() collapsed into
ahci_init_one() for init order consistency
* sata_vsc uses port_info instead of setting fields manually
* in sata_svw, k2_board_info converted to port_info (info is now in
port flags). port number is honored now.
Tested on ICH7/8 AHCI, jmb360, sil3112, 3114, 3124 and 3132.
Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-17 14:44:08 +00:00
|
|
|
static unsigned int pdc20621_dimm_init(struct ata_host *host);
|
|
|
|
static int pdc20621_detect_dimm(struct ata_host *host);
|
|
|
|
static unsigned int pdc20621_i2c_read(struct ata_host *host,
|
2005-04-16 22:20:36 +00:00
|
|
|
u32 device, u32 subaddr, u32 *pdata);
|
libata: convert the remaining SATA drivers to new init model
Convert ahci, sata_sil, sata_sil24, sata_svw, sata_qstor, sata_mv,
sata_sx4, sata_vsc and sata_inic162x to new init model.
Now that host and ap are available during intialization, functions are
converted to take either host or ap instead of low level parameters
which were inevitable for functions shared between init and other
paths. This simplifies code quite a bit.
* init_one()'s now follow more consistent init order
* ahci_setup_port() and ahci_host_init() collapsed into
ahci_init_one() for init order consistency
* sata_vsc uses port_info instead of setting fields manually
* in sata_svw, k2_board_info converted to port_info (info is now in
port flags). port number is honored now.
Tested on ICH7/8 AHCI, jmb360, sil3112, 3114, 3124 and 3132.
Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-17 14:44:08 +00:00
|
|
|
static int pdc20621_prog_dimm0(struct ata_host *host);
|
|
|
|
static unsigned int pdc20621_prog_dimm_global(struct ata_host *host);
|
|
|
|
static void pdc20621_get_from_dimm(struct ata_host *host,
|
2005-04-16 22:20:36 +00:00
|
|
|
void *psource, u32 offset, u32 size);
|
libata: convert the remaining SATA drivers to new init model
Convert ahci, sata_sil, sata_sil24, sata_svw, sata_qstor, sata_mv,
sata_sx4, sata_vsc and sata_inic162x to new init model.
Now that host and ap are available during intialization, functions are
converted to take either host or ap instead of low level parameters
which were inevitable for functions shared between init and other
paths. This simplifies code quite a bit.
* init_one()'s now follow more consistent init order
* ahci_setup_port() and ahci_host_init() collapsed into
ahci_init_one() for init order consistency
* sata_vsc uses port_info instead of setting fields manually
* in sata_svw, k2_board_info converted to port_info (info is now in
port flags). port number is honored now.
Tested on ICH7/8 AHCI, jmb360, sil3112, 3114, 3124 and 3132.
Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-17 14:44:08 +00:00
|
|
|
static void pdc20621_put_to_dimm(struct ata_host *host,
|
2005-04-16 22:20:36 +00:00
|
|
|
void *psource, u32 offset, u32 size);
|
|
|
|
static void pdc20621_irq_clear(struct ata_port *ap);
|
2008-04-07 13:47:16 +00:00
|
|
|
static unsigned int pdc20621_qc_issue(struct ata_queued_cmd *qc);
|
2009-04-08 20:02:18 +00:00
|
|
|
static int pdc_softreset(struct ata_link *link, unsigned int *class,
|
|
|
|
unsigned long deadline);
|
|
|
|
static void pdc_post_internal_cmd(struct ata_queued_cmd *qc);
|
|
|
|
static int pdc_check_atapi_dma(struct ata_queued_cmd *qc);
|
2005-04-16 22:20:36 +00:00
|
|
|
|
|
|
|
|
2023-03-22 19:53:59 +00:00
|
|
|
static const struct scsi_host_template pdc_sata_sht = {
|
2008-03-25 03:22:49 +00:00
|
|
|
ATA_BASE_SHT(DRV_NAME),
|
2005-04-16 22:20:36 +00:00
|
|
|
.sg_tablesize = LIBATA_MAX_PRD,
|
|
|
|
.dma_boundary = ATA_DMA_BOUNDARY,
|
|
|
|
};
|
|
|
|
|
libata: implement and use ops inheritance
libata lets low level drivers build ata_port_operations table and
register it with libata core layer. This allows low level drivers
high level of flexibility but also burdens them with lots of
boilerplate entries.
This becomes worse for drivers which support related similar
controllers which differ slightly. They share most of the operations
except for a few. However, the driver still needs to list all
operations for each variant. This results in large number of
duplicate entries, which is not only inefficient but also error-prone
as it becomes very difficult to tell what the actual differences are.
This duplicate boilerplates all over the low level drivers also make
updating the core layer exteremely difficult and error-prone. When
compounded with multi-branched development model, it ends up
accumulating inconsistencies over time. Some of those inconsistencies
cause immediate problems and fixed. Others just remain there dormant
making maintenance increasingly difficult.
To rectify the problem, this patch implements ata_port_operations
inheritance. To allow LLDs to easily re-use their own ops tables
overriding only specific methods, this patch implements poor man's
class inheritance. An ops table has ->inherits field which can be set
to any ops table as long as it doesn't create a loop. When the host
is started, the inheritance chain is followed and any operation which
isn't specified is taken from the nearest ancestor which has it
specified. This operation is called finalization and done only once
per an ops table and the LLD doesn't have to do anything special about
it other than making the ops table non-const such that libata can
update it.
libata provides four base ops tables lower drivers can inherit from -
base, sata, pmp, sff and bmdma. To avoid overriding these ops
accidentaly, these ops are declared const and LLDs should always
inherit these instead of using them directly.
After finalization, all the ops table are identical before and after
the patch except for setting .irq_handler to ata_interrupt in drivers
which didn't use to. The .irq_handler doesn't have any actual effect
and the field will soon be removed by later patch.
* sata_sx4 is still using old style EH and currently doesn't take
advantage of ops inheritance.
Signed-off-by: Tejun Heo <htejun@gmail.com>
2008-03-25 03:22:49 +00:00
|
|
|
static struct ata_port_operations pdc_20621_ops = {
|
2009-04-08 20:02:18 +00:00
|
|
|
.inherits = &ata_sff_port_ops,
|
|
|
|
|
|
|
|
.check_atapi_dma = pdc_check_atapi_dma,
|
2005-04-16 22:20:36 +00:00
|
|
|
.qc_prep = pdc20621_qc_prep,
|
2008-04-07 13:47:16 +00:00
|
|
|
.qc_issue = pdc20621_qc_issue,
|
2009-04-08 20:02:18 +00:00
|
|
|
|
|
|
|
.freeze = pdc_freeze,
|
|
|
|
.thaw = pdc_thaw,
|
|
|
|
.softreset = pdc_softreset,
|
|
|
|
.error_handler = pdc_error_handler,
|
|
|
|
.lost_interrupt = ATA_OP_NULL,
|
|
|
|
.post_internal_cmd = pdc_post_internal_cmd,
|
|
|
|
|
2005-04-16 22:20:36 +00:00
|
|
|
.port_start = pdc_port_start,
|
2009-04-08 20:02:18 +00:00
|
|
|
|
|
|
|
.sff_tf_load = pdc_tf_load_mmio,
|
|
|
|
.sff_exec_command = pdc_exec_command_mmio,
|
|
|
|
.sff_irq_clear = pdc20621_irq_clear,
|
2005-04-16 22:20:36 +00:00
|
|
|
};
|
|
|
|
|
2005-11-28 09:06:23 +00:00
|
|
|
static const struct ata_port_info pdc_port_info[] = {
|
2005-04-16 22:20:36 +00:00
|
|
|
/* board_20621 */
|
|
|
|
{
|
2011-02-04 19:05:48 +00:00
|
|
|
.flags = ATA_FLAG_SATA | ATA_FLAG_NO_ATAPI |
|
|
|
|
ATA_FLAG_PIO_POLLING,
|
2009-03-14 20:38:24 +00:00
|
|
|
.pio_mask = ATA_PIO4,
|
|
|
|
.mwdma_mask = ATA_MWDMA2,
|
2007-07-08 05:13:16 +00:00
|
|
|
.udma_mask = ATA_UDMA6,
|
2005-04-16 22:20:36 +00:00
|
|
|
.port_ops = &pdc_20621_ops,
|
|
|
|
},
|
|
|
|
|
|
|
|
};
|
|
|
|
|
2005-11-10 16:04:11 +00:00
|
|
|
static const struct pci_device_id pdc_sata_pci_tbl[] = {
|
2006-09-28 02:20:11 +00:00
|
|
|
{ PCI_VDEVICE(PROMISE, 0x6622), board_20621 },
|
|
|
|
|
2005-04-16 22:20:36 +00:00
|
|
|
{ } /* terminate list */
|
|
|
|
};
|
|
|
|
|
|
|
|
static struct pci_driver pdc_sata_pci_driver = {
|
|
|
|
.name = DRV_NAME,
|
|
|
|
.id_table = pdc_sata_pci_tbl,
|
|
|
|
.probe = pdc_sata_init_one,
|
|
|
|
.remove = ata_pci_remove_one,
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
|
|
static int pdc_port_start(struct ata_port *ap)
|
|
|
|
{
|
2006-08-24 07:19:22 +00:00
|
|
|
struct device *dev = ap->host->dev;
|
2005-04-16 22:20:36 +00:00
|
|
|
struct pdc_port_priv *pp;
|
|
|
|
|
2007-01-20 07:00:28 +00:00
|
|
|
pp = devm_kzalloc(dev, sizeof(*pp), GFP_KERNEL);
|
|
|
|
if (!pp)
|
|
|
|
return -ENOMEM;
|
2005-04-16 22:20:36 +00:00
|
|
|
|
2007-01-20 07:00:28 +00:00
|
|
|
pp->pkt = dmam_alloc_coherent(dev, 128, &pp->pkt_dma, GFP_KERNEL);
|
|
|
|
if (!pp->pkt)
|
|
|
|
return -ENOMEM;
|
2005-04-16 22:20:36 +00:00
|
|
|
|
|
|
|
ap->private_data = pp;
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2012-10-25 17:19:12 +00:00
|
|
|
static inline void pdc20621_ata_sg(u8 *buf, unsigned int portno,
|
|
|
|
unsigned int total_len)
|
2005-04-16 22:20:36 +00:00
|
|
|
{
|
|
|
|
u32 addr;
|
|
|
|
unsigned int dw = PDC_DIMM_APKT_PRD >> 2;
|
2007-12-30 09:32:22 +00:00
|
|
|
__le32 *buf32 = (__le32 *) buf;
|
2005-04-16 22:20:36 +00:00
|
|
|
|
|
|
|
/* output ATA packet S/G table */
|
|
|
|
addr = PDC_20621_DIMM_BASE + PDC_20621_DIMM_DATA +
|
|
|
|
(PDC_DIMM_DATA_STEP * portno);
|
2021-12-21 07:20:59 +00:00
|
|
|
|
2005-04-16 22:20:36 +00:00
|
|
|
buf32[dw] = cpu_to_le32(addr);
|
|
|
|
buf32[dw + 1] = cpu_to_le32(total_len | ATA_PRD_EOT);
|
|
|
|
}
|
|
|
|
|
2012-10-25 17:19:12 +00:00
|
|
|
static inline void pdc20621_host_sg(u8 *buf, unsigned int portno,
|
|
|
|
unsigned int total_len)
|
2005-04-16 22:20:36 +00:00
|
|
|
{
|
|
|
|
u32 addr;
|
|
|
|
unsigned int dw = PDC_DIMM_HPKT_PRD >> 2;
|
2007-12-30 09:32:22 +00:00
|
|
|
__le32 *buf32 = (__le32 *) buf;
|
2005-04-16 22:20:36 +00:00
|
|
|
|
|
|
|
/* output Host DMA packet S/G table */
|
|
|
|
addr = PDC_20621_DIMM_BASE + PDC_20621_DIMM_DATA +
|
|
|
|
(PDC_DIMM_DATA_STEP * portno);
|
|
|
|
|
|
|
|
buf32[dw] = cpu_to_le32(addr);
|
|
|
|
buf32[dw + 1] = cpu_to_le32(total_len | ATA_PRD_EOT);
|
|
|
|
}
|
|
|
|
|
|
|
|
static inline unsigned int pdc20621_ata_pkt(struct ata_taskfile *tf,
|
|
|
|
unsigned int devno, u8 *buf,
|
|
|
|
unsigned int portno)
|
|
|
|
{
|
|
|
|
unsigned int i, dw;
|
2007-12-30 09:32:22 +00:00
|
|
|
__le32 *buf32 = (__le32 *) buf;
|
2005-04-16 22:20:36 +00:00
|
|
|
u8 dev_reg;
|
|
|
|
|
|
|
|
unsigned int dimm_sg = PDC_20621_DIMM_BASE +
|
|
|
|
(PDC_DIMM_WINDOW_STEP * portno) +
|
|
|
|
PDC_DIMM_APKT_PRD;
|
|
|
|
|
|
|
|
i = PDC_DIMM_ATA_PKT;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Set up ATA packet
|
|
|
|
*/
|
|
|
|
if ((tf->protocol == ATA_PROT_DMA) && (!(tf->flags & ATA_TFLAG_WRITE)))
|
|
|
|
buf[i++] = PDC_PKT_READ;
|
|
|
|
else if (tf->protocol == ATA_PROT_NODATA)
|
|
|
|
buf[i++] = PDC_PKT_NODATA;
|
|
|
|
else
|
|
|
|
buf[i++] = 0;
|
|
|
|
buf[i++] = 0; /* reserved */
|
|
|
|
buf[i++] = portno + 1; /* seq. id */
|
|
|
|
buf[i++] = 0xff; /* delay seq. id */
|
|
|
|
|
|
|
|
/* dimm dma S/G, and next-pkt */
|
|
|
|
dw = i >> 2;
|
|
|
|
if (tf->protocol == ATA_PROT_NODATA)
|
|
|
|
buf32[dw] = 0;
|
|
|
|
else
|
|
|
|
buf32[dw] = cpu_to_le32(dimm_sg);
|
|
|
|
buf32[dw + 1] = 0;
|
|
|
|
i += 8;
|
|
|
|
|
|
|
|
if (devno == 0)
|
|
|
|
dev_reg = ATA_DEVICE_OBS;
|
|
|
|
else
|
|
|
|
dev_reg = ATA_DEVICE_OBS | ATA_DEV1;
|
|
|
|
|
|
|
|
/* select device */
|
|
|
|
buf[i++] = (1 << 5) | PDC_PKT_CLEAR_BSY | ATA_REG_DEVICE;
|
|
|
|
buf[i++] = dev_reg;
|
|
|
|
|
|
|
|
/* device control register */
|
|
|
|
buf[i++] = (1 << 5) | PDC_REG_DEVCTL;
|
|
|
|
buf[i++] = tf->ctl;
|
|
|
|
|
|
|
|
return i;
|
|
|
|
}
|
|
|
|
|
|
|
|
static inline void pdc20621_host_pkt(struct ata_taskfile *tf, u8 *buf,
|
|
|
|
unsigned int portno)
|
|
|
|
{
|
|
|
|
unsigned int dw;
|
2007-12-30 09:32:22 +00:00
|
|
|
u32 tmp;
|
|
|
|
__le32 *buf32 = (__le32 *) buf;
|
2005-04-16 22:20:36 +00:00
|
|
|
|
|
|
|
unsigned int host_sg = PDC_20621_DIMM_BASE +
|
|
|
|
(PDC_DIMM_WINDOW_STEP * portno) +
|
|
|
|
PDC_DIMM_HOST_PRD;
|
|
|
|
unsigned int dimm_sg = PDC_20621_DIMM_BASE +
|
|
|
|
(PDC_DIMM_WINDOW_STEP * portno) +
|
|
|
|
PDC_DIMM_HPKT_PRD;
|
|
|
|
|
|
|
|
dw = PDC_DIMM_HOST_PKT >> 2;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Set up Host DMA packet
|
|
|
|
*/
|
|
|
|
if ((tf->protocol == ATA_PROT_DMA) && (!(tf->flags & ATA_TFLAG_WRITE)))
|
|
|
|
tmp = PDC_PKT_READ;
|
|
|
|
else
|
|
|
|
tmp = 0;
|
|
|
|
tmp |= ((portno + 1 + 4) << 16); /* seq. id */
|
|
|
|
tmp |= (0xff << 24); /* delay seq. id */
|
|
|
|
buf32[dw + 0] = cpu_to_le32(tmp);
|
|
|
|
buf32[dw + 1] = cpu_to_le32(host_sg);
|
|
|
|
buf32[dw + 2] = cpu_to_le32(dimm_sg);
|
|
|
|
buf32[dw + 3] = 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void pdc20621_dma_prep(struct ata_queued_cmd *qc)
|
|
|
|
{
|
2005-10-05 11:13:30 +00:00
|
|
|
struct scatterlist *sg;
|
2005-04-16 22:20:36 +00:00
|
|
|
struct ata_port *ap = qc->ap;
|
|
|
|
struct pdc_port_priv *pp = ap->private_data;
|
2007-02-01 06:06:36 +00:00
|
|
|
void __iomem *mmio = ap->host->iomap[PDC_MMIO_BAR];
|
|
|
|
void __iomem *dimm_mmio = ap->host->iomap[PDC_DIMM_BAR];
|
2005-04-16 22:20:36 +00:00
|
|
|
unsigned int portno = ap->port_no;
|
2007-12-05 07:43:11 +00:00
|
|
|
unsigned int i, si, idx, total_len = 0, sgt_len;
|
2008-03-25 05:18:11 +00:00
|
|
|
__le32 *buf = (__le32 *) &pp->dimm_buf[PDC_DIMM_HEADER_SZ];
|
2005-04-16 22:20:36 +00:00
|
|
|
|
2006-02-11 10:11:13 +00:00
|
|
|
WARN_ON(!(qc->flags & ATA_QCFLAG_DMAMAP));
|
2005-04-16 22:20:36 +00:00
|
|
|
|
|
|
|
/* hard-code chip #0 */
|
|
|
|
mmio += PDC_CHIP0_OFS;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Build S/G table
|
|
|
|
*/
|
|
|
|
idx = 0;
|
2007-12-05 07:43:11 +00:00
|
|
|
for_each_sg(qc->sg, sg, qc->n_elem, si) {
|
2005-10-05 11:13:30 +00:00
|
|
|
buf[idx++] = cpu_to_le32(sg_dma_address(sg));
|
|
|
|
buf[idx++] = cpu_to_le32(sg_dma_len(sg));
|
|
|
|
total_len += sg_dma_len(sg);
|
2005-04-16 22:20:36 +00:00
|
|
|
}
|
|
|
|
buf[idx - 1] |= cpu_to_le32(ATA_PRD_EOT);
|
|
|
|
sgt_len = idx * 4;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Build ATA, host DMA packets
|
|
|
|
*/
|
2012-10-25 17:19:12 +00:00
|
|
|
pdc20621_host_sg(&pp->dimm_buf[0], portno, total_len);
|
2005-04-16 22:20:36 +00:00
|
|
|
pdc20621_host_pkt(&qc->tf, &pp->dimm_buf[0], portno);
|
|
|
|
|
2012-10-25 17:19:12 +00:00
|
|
|
pdc20621_ata_sg(&pp->dimm_buf[0], portno, total_len);
|
2005-04-16 22:20:36 +00:00
|
|
|
i = pdc20621_ata_pkt(&qc->tf, qc->dev->devno, &pp->dimm_buf[0], portno);
|
|
|
|
|
|
|
|
if (qc->tf.flags & ATA_TFLAG_LBA48)
|
|
|
|
i = pdc_prep_lba48(&qc->tf, &pp->dimm_buf[0], i);
|
|
|
|
else
|
|
|
|
i = pdc_prep_lba28(&qc->tf, &pp->dimm_buf[0], i);
|
|
|
|
|
|
|
|
pdc_pkt_footer(&qc->tf, &pp->dimm_buf[0], i);
|
|
|
|
|
|
|
|
/* copy three S/G tables and two packets to DIMM MMIO window */
|
|
|
|
memcpy_toio(dimm_mmio + (portno * PDC_DIMM_WINDOW_STEP),
|
|
|
|
&pp->dimm_buf, PDC_DIMM_HEADER_SZ);
|
|
|
|
memcpy_toio(dimm_mmio + (portno * PDC_DIMM_WINDOW_STEP) +
|
|
|
|
PDC_DIMM_HOST_PRD,
|
|
|
|
&pp->dimm_buf[PDC_DIMM_HEADER_SZ], sgt_len);
|
|
|
|
|
|
|
|
/* force host FIFO dump */
|
|
|
|
writel(0x00000001, mmio + PDC_20621_GENERAL_CTL);
|
|
|
|
|
|
|
|
readl(dimm_mmio); /* MMIO PCI posting flush */
|
|
|
|
|
2021-12-21 07:20:59 +00:00
|
|
|
ata_port_dbg(ap, "ata pkt buf ofs %u, prd size %u, mmio copied\n",
|
|
|
|
i, sgt_len);
|
2005-04-16 22:20:36 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
static void pdc20621_nodata_prep(struct ata_queued_cmd *qc)
|
|
|
|
{
|
|
|
|
struct ata_port *ap = qc->ap;
|
|
|
|
struct pdc_port_priv *pp = ap->private_data;
|
2007-02-01 06:06:36 +00:00
|
|
|
void __iomem *mmio = ap->host->iomap[PDC_MMIO_BAR];
|
|
|
|
void __iomem *dimm_mmio = ap->host->iomap[PDC_DIMM_BAR];
|
2005-04-16 22:20:36 +00:00
|
|
|
unsigned int portno = ap->port_no;
|
|
|
|
unsigned int i;
|
|
|
|
|
|
|
|
/* hard-code chip #0 */
|
|
|
|
mmio += PDC_CHIP0_OFS;
|
|
|
|
|
|
|
|
i = pdc20621_ata_pkt(&qc->tf, qc->dev->devno, &pp->dimm_buf[0], portno);
|
|
|
|
|
|
|
|
if (qc->tf.flags & ATA_TFLAG_LBA48)
|
|
|
|
i = pdc_prep_lba48(&qc->tf, &pp->dimm_buf[0], i);
|
|
|
|
else
|
|
|
|
i = pdc_prep_lba28(&qc->tf, &pp->dimm_buf[0], i);
|
|
|
|
|
|
|
|
pdc_pkt_footer(&qc->tf, &pp->dimm_buf[0], i);
|
|
|
|
|
|
|
|
/* copy three S/G tables and two packets to DIMM MMIO window */
|
|
|
|
memcpy_toio(dimm_mmio + (portno * PDC_DIMM_WINDOW_STEP),
|
|
|
|
&pp->dimm_buf, PDC_DIMM_HEADER_SZ);
|
|
|
|
|
|
|
|
/* force host FIFO dump */
|
|
|
|
writel(0x00000001, mmio + PDC_20621_GENERAL_CTL);
|
|
|
|
|
|
|
|
readl(dimm_mmio); /* MMIO PCI posting flush */
|
|
|
|
|
2021-12-21 07:20:59 +00:00
|
|
|
ata_port_dbg(ap, "ata pkt buf ofs %u, mmio copied\n", i);
|
2005-04-16 22:20:36 +00:00
|
|
|
}
|
|
|
|
|
2019-10-31 09:59:45 +00:00
|
|
|
static enum ata_completion_errors pdc20621_qc_prep(struct ata_queued_cmd *qc)
|
2005-04-16 22:20:36 +00:00
|
|
|
{
|
|
|
|
switch (qc->tf.protocol) {
|
|
|
|
case ATA_PROT_DMA:
|
|
|
|
pdc20621_dma_prep(qc);
|
|
|
|
break;
|
|
|
|
case ATA_PROT_NODATA:
|
|
|
|
pdc20621_nodata_prep(qc);
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
break;
|
|
|
|
}
|
2019-10-31 09:59:45 +00:00
|
|
|
|
|
|
|
return AC_ERR_OK;
|
2005-04-16 22:20:36 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
static void __pdc20621_push_hdma(struct ata_queued_cmd *qc,
|
|
|
|
unsigned int seq,
|
|
|
|
u32 pkt_ofs)
|
|
|
|
{
|
|
|
|
struct ata_port *ap = qc->ap;
|
2006-08-24 07:19:22 +00:00
|
|
|
struct ata_host *host = ap->host;
|
2007-02-01 06:06:36 +00:00
|
|
|
void __iomem *mmio = host->iomap[PDC_MMIO_BAR];
|
2005-04-16 22:20:36 +00:00
|
|
|
|
|
|
|
/* hard-code chip #0 */
|
|
|
|
mmio += PDC_CHIP0_OFS;
|
|
|
|
|
|
|
|
writel(0x00000001, mmio + PDC_20621_SEQCTL + (seq * 4));
|
|
|
|
readl(mmio + PDC_20621_SEQCTL + (seq * 4)); /* flush */
|
|
|
|
|
|
|
|
writel(pkt_ofs, mmio + PDC_HDMA_PKT_SUBMIT);
|
|
|
|
readl(mmio + PDC_HDMA_PKT_SUBMIT); /* flush */
|
|
|
|
}
|
|
|
|
|
|
|
|
static void pdc20621_push_hdma(struct ata_queued_cmd *qc,
|
|
|
|
unsigned int seq,
|
|
|
|
u32 pkt_ofs)
|
|
|
|
{
|
|
|
|
struct ata_port *ap = qc->ap;
|
2006-08-24 07:19:22 +00:00
|
|
|
struct pdc_host_priv *pp = ap->host->private_data;
|
2005-04-16 22:20:36 +00:00
|
|
|
unsigned int idx = pp->hdma_prod & PDC_HDMA_Q_MASK;
|
|
|
|
|
|
|
|
if (!pp->doing_hdma) {
|
|
|
|
__pdc20621_push_hdma(qc, seq, pkt_ofs);
|
|
|
|
pp->doing_hdma = 1;
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
|
|
|
pp->hdma[idx].qc = qc;
|
|
|
|
pp->hdma[idx].seq = seq;
|
|
|
|
pp->hdma[idx].pkt_ofs = pkt_ofs;
|
|
|
|
pp->hdma_prod++;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void pdc20621_pop_hdma(struct ata_queued_cmd *qc)
|
|
|
|
{
|
|
|
|
struct ata_port *ap = qc->ap;
|
2006-08-24 07:19:22 +00:00
|
|
|
struct pdc_host_priv *pp = ap->host->private_data;
|
2005-04-16 22:20:36 +00:00
|
|
|
unsigned int idx = pp->hdma_cons & PDC_HDMA_Q_MASK;
|
|
|
|
|
|
|
|
/* if nothing on queue, we're done */
|
|
|
|
if (pp->hdma_prod == pp->hdma_cons) {
|
|
|
|
pp->doing_hdma = 0;
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
|
|
|
__pdc20621_push_hdma(pp->hdma[idx].qc, pp->hdma[idx].seq,
|
|
|
|
pp->hdma[idx].pkt_ofs);
|
|
|
|
pp->hdma_cons++;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void pdc20621_dump_hdma(struct ata_queued_cmd *qc)
|
|
|
|
{
|
|
|
|
struct ata_port *ap = qc->ap;
|
|
|
|
unsigned int port_no = ap->port_no;
|
2007-02-01 06:06:36 +00:00
|
|
|
void __iomem *dimm_mmio = ap->host->iomap[PDC_DIMM_BAR];
|
2005-04-16 22:20:36 +00:00
|
|
|
|
|
|
|
dimm_mmio += (port_no * PDC_DIMM_WINDOW_STEP);
|
|
|
|
dimm_mmio += PDC_DIMM_HOST_PKT;
|
|
|
|
|
2021-12-21 07:21:00 +00:00
|
|
|
ata_port_dbg(ap, "HDMA 0x%08X 0x%08X 0x%08X 0x%08X\n",
|
|
|
|
readl(dimm_mmio), readl(dimm_mmio + 4),
|
|
|
|
readl(dimm_mmio + 8), readl(dimm_mmio + 12));
|
2005-04-16 22:20:36 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
static void pdc20621_packet_start(struct ata_queued_cmd *qc)
|
|
|
|
{
|
|
|
|
struct ata_port *ap = qc->ap;
|
2006-08-24 07:19:22 +00:00
|
|
|
struct ata_host *host = ap->host;
|
2005-04-16 22:20:36 +00:00
|
|
|
unsigned int port_no = ap->port_no;
|
2007-02-01 06:06:36 +00:00
|
|
|
void __iomem *mmio = host->iomap[PDC_MMIO_BAR];
|
2005-04-16 22:20:36 +00:00
|
|
|
unsigned int rw = (qc->tf.flags & ATA_TFLAG_WRITE);
|
|
|
|
u8 seq = (u8) (port_no + 1);
|
|
|
|
unsigned int port_ofs;
|
|
|
|
|
|
|
|
/* hard-code chip #0 */
|
|
|
|
mmio += PDC_CHIP0_OFS;
|
|
|
|
|
|
|
|
wmb(); /* flush PRD, pkt writes */
|
|
|
|
|
|
|
|
port_ofs = PDC_20621_DIMM_BASE + (PDC_DIMM_WINDOW_STEP * port_no);
|
|
|
|
|
|
|
|
/* if writing, we (1) DMA to DIMM, then (2) do ATA command */
|
|
|
|
if (rw && qc->tf.protocol == ATA_PROT_DMA) {
|
|
|
|
seq += 4;
|
|
|
|
|
|
|
|
pdc20621_dump_hdma(qc);
|
|
|
|
pdc20621_push_hdma(qc, seq, port_ofs + PDC_DIMM_HOST_PKT);
|
2021-12-21 07:20:59 +00:00
|
|
|
ata_port_dbg(ap, "queued ofs 0x%x (%u), seq %u\n",
|
2005-04-16 22:20:36 +00:00
|
|
|
port_ofs + PDC_DIMM_HOST_PKT,
|
|
|
|
port_ofs + PDC_DIMM_HOST_PKT,
|
|
|
|
seq);
|
|
|
|
} else {
|
|
|
|
writel(0x00000001, mmio + PDC_20621_SEQCTL + (seq * 4));
|
|
|
|
readl(mmio + PDC_20621_SEQCTL + (seq * 4)); /* flush */
|
|
|
|
|
|
|
|
writel(port_ofs + PDC_DIMM_ATA_PKT,
|
2007-02-01 06:06:36 +00:00
|
|
|
ap->ioaddr.cmd_addr + PDC_PKT_SUBMIT);
|
|
|
|
readl(ap->ioaddr.cmd_addr + PDC_PKT_SUBMIT);
|
2021-12-21 07:20:59 +00:00
|
|
|
ata_port_dbg(ap, "submitted ofs 0x%x (%u), seq %u\n",
|
2005-04-16 22:20:36 +00:00
|
|
|
port_ofs + PDC_DIMM_ATA_PKT,
|
|
|
|
port_ofs + PDC_DIMM_ATA_PKT,
|
|
|
|
seq);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2008-04-07 13:47:16 +00:00
|
|
|
static unsigned int pdc20621_qc_issue(struct ata_queued_cmd *qc)
|
2005-04-16 22:20:36 +00:00
|
|
|
{
|
|
|
|
switch (qc->tf.protocol) {
|
|
|
|
case ATA_PROT_NODATA:
|
2009-05-13 23:02:21 +00:00
|
|
|
if (qc->tf.flags & ATA_TFLAG_POLLING)
|
|
|
|
break;
|
2020-08-23 22:36:59 +00:00
|
|
|
fallthrough;
|
2009-05-13 23:02:21 +00:00
|
|
|
case ATA_PROT_DMA:
|
2005-04-16 22:20:36 +00:00
|
|
|
pdc20621_packet_start(qc);
|
|
|
|
return 0;
|
|
|
|
|
2007-12-18 21:34:43 +00:00
|
|
|
case ATAPI_PROT_DMA:
|
2005-04-16 22:20:36 +00:00
|
|
|
BUG();
|
|
|
|
break;
|
|
|
|
|
|
|
|
default:
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
|
2008-04-07 13:47:16 +00:00
|
|
|
return ata_sff_qc_issue(qc);
|
2005-04-16 22:20:36 +00:00
|
|
|
}
|
|
|
|
|
2007-10-26 04:03:37 +00:00
|
|
|
static inline unsigned int pdc20621_host_intr(struct ata_port *ap,
|
|
|
|
struct ata_queued_cmd *qc,
|
2005-04-16 22:20:36 +00:00
|
|
|
unsigned int doing_hdma,
|
2005-08-30 09:18:18 +00:00
|
|
|
void __iomem *mmio)
|
2005-04-16 22:20:36 +00:00
|
|
|
{
|
|
|
|
unsigned int port_no = ap->port_no;
|
|
|
|
unsigned int port_ofs =
|
|
|
|
PDC_20621_DIMM_BASE + (PDC_DIMM_WINDOW_STEP * port_no);
|
|
|
|
u8 status;
|
|
|
|
unsigned int handled = 0;
|
|
|
|
|
|
|
|
if ((qc->tf.protocol == ATA_PROT_DMA) && /* read */
|
|
|
|
(!(qc->tf.flags & ATA_TFLAG_WRITE))) {
|
|
|
|
|
|
|
|
/* step two - DMA from DIMM to host */
|
|
|
|
if (doing_hdma) {
|
2021-12-21 07:20:59 +00:00
|
|
|
ata_port_dbg(ap, "read hdma, 0x%x 0x%x\n",
|
2005-04-16 22:20:36 +00:00
|
|
|
readl(mmio + 0x104), readl(mmio + PDC_HDMA_CTLSTAT));
|
|
|
|
/* get drive status; clear intr; complete txn */
|
2005-12-05 07:38:02 +00:00
|
|
|
qc->err_mask |= ac_err_mask(ata_wait_idle(ap));
|
|
|
|
ata_qc_complete(qc);
|
2005-04-16 22:20:36 +00:00
|
|
|
pdc20621_pop_hdma(qc);
|
|
|
|
}
|
|
|
|
|
|
|
|
/* step one - exec ATA command */
|
|
|
|
else {
|
|
|
|
u8 seq = (u8) (port_no + 1 + 4);
|
2021-12-21 07:20:59 +00:00
|
|
|
ata_port_dbg(ap, "read ata, 0x%x 0x%x\n",
|
2005-04-16 22:20:36 +00:00
|
|
|
readl(mmio + 0x104), readl(mmio + PDC_HDMA_CTLSTAT));
|
|
|
|
|
|
|
|
/* submit hdma pkt */
|
|
|
|
pdc20621_dump_hdma(qc);
|
|
|
|
pdc20621_push_hdma(qc, seq,
|
|
|
|
port_ofs + PDC_DIMM_HOST_PKT);
|
|
|
|
}
|
|
|
|
handled = 1;
|
|
|
|
|
|
|
|
} else if (qc->tf.protocol == ATA_PROT_DMA) { /* write */
|
|
|
|
|
|
|
|
/* step one - DMA from host to DIMM */
|
|
|
|
if (doing_hdma) {
|
|
|
|
u8 seq = (u8) (port_no + 1);
|
2021-12-21 07:20:59 +00:00
|
|
|
ata_port_dbg(ap, "write hdma, 0x%x 0x%x\n",
|
2005-04-16 22:20:36 +00:00
|
|
|
readl(mmio + 0x104), readl(mmio + PDC_HDMA_CTLSTAT));
|
|
|
|
|
|
|
|
/* submit ata pkt */
|
|
|
|
writel(0x00000001, mmio + PDC_20621_SEQCTL + (seq * 4));
|
|
|
|
readl(mmio + PDC_20621_SEQCTL + (seq * 4));
|
|
|
|
writel(port_ofs + PDC_DIMM_ATA_PKT,
|
2007-02-01 06:06:36 +00:00
|
|
|
ap->ioaddr.cmd_addr + PDC_PKT_SUBMIT);
|
|
|
|
readl(ap->ioaddr.cmd_addr + PDC_PKT_SUBMIT);
|
2005-04-16 22:20:36 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
/* step two - execute ATA command */
|
|
|
|
else {
|
2021-12-21 07:20:59 +00:00
|
|
|
ata_port_dbg(ap, "write ata, 0x%x 0x%x\n",
|
2005-04-16 22:20:36 +00:00
|
|
|
readl(mmio + 0x104), readl(mmio + PDC_HDMA_CTLSTAT));
|
|
|
|
/* get drive status; clear intr; complete txn */
|
2005-12-05 07:38:02 +00:00
|
|
|
qc->err_mask |= ac_err_mask(ata_wait_idle(ap));
|
|
|
|
ata_qc_complete(qc);
|
2005-04-16 22:20:36 +00:00
|
|
|
pdc20621_pop_hdma(qc);
|
|
|
|
}
|
|
|
|
handled = 1;
|
|
|
|
|
|
|
|
/* command completion, but no data xfer */
|
|
|
|
} else if (qc->tf.protocol == ATA_PROT_NODATA) {
|
|
|
|
|
2008-04-07 13:47:16 +00:00
|
|
|
status = ata_sff_busy_wait(ap, ATA_BUSY | ATA_DRQ, 1000);
|
2021-12-21 07:20:59 +00:00
|
|
|
ata_port_dbg(ap, "BUS_NODATA (drv_stat 0x%X)\n", status);
|
2005-12-05 07:38:02 +00:00
|
|
|
qc->err_mask |= ac_err_mask(status);
|
|
|
|
ata_qc_complete(qc);
|
2005-04-16 22:20:36 +00:00
|
|
|
handled = 1;
|
|
|
|
|
|
|
|
} else {
|
|
|
|
ap->stats.idle_irq++;
|
|
|
|
}
|
|
|
|
|
|
|
|
return handled;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void pdc20621_irq_clear(struct ata_port *ap)
|
|
|
|
{
|
2009-05-13 23:02:21 +00:00
|
|
|
ioread8(ap->ioaddr.status_addr);
|
2005-04-16 22:20:36 +00:00
|
|
|
}
|
|
|
|
|
2007-10-26 04:03:37 +00:00
|
|
|
static irqreturn_t pdc20621_interrupt(int irq, void *dev_instance)
|
2005-04-16 22:20:36 +00:00
|
|
|
{
|
2006-08-24 07:19:22 +00:00
|
|
|
struct ata_host *host = dev_instance;
|
2005-04-16 22:20:36 +00:00
|
|
|
struct ata_port *ap;
|
|
|
|
u32 mask = 0;
|
|
|
|
unsigned int i, tmp, port_no;
|
|
|
|
unsigned int handled = 0;
|
2005-08-30 09:18:18 +00:00
|
|
|
void __iomem *mmio_base;
|
2005-04-16 22:20:36 +00:00
|
|
|
|
2021-12-21 07:20:59 +00:00
|
|
|
if (!host || !host->iomap[PDC_MMIO_BAR])
|
2005-04-16 22:20:36 +00:00
|
|
|
return IRQ_NONE;
|
|
|
|
|
2007-02-01 06:06:36 +00:00
|
|
|
mmio_base = host->iomap[PDC_MMIO_BAR];
|
2005-04-16 22:20:36 +00:00
|
|
|
|
|
|
|
/* reading should also clear interrupts */
|
|
|
|
mmio_base += PDC_CHIP0_OFS;
|
|
|
|
mask = readl(mmio_base + PDC_20621_SEQMASK);
|
|
|
|
|
2021-12-21 07:20:59 +00:00
|
|
|
if (mask == 0xffffffff)
|
2005-04-16 22:20:36 +00:00
|
|
|
return IRQ_NONE;
|
2021-12-21 07:20:59 +00:00
|
|
|
|
2005-04-16 22:20:36 +00:00
|
|
|
mask &= 0xffff; /* only 16 tags possible */
|
2021-12-21 07:20:59 +00:00
|
|
|
if (!mask)
|
2005-04-16 22:20:36 +00:00
|
|
|
return IRQ_NONE;
|
|
|
|
|
2007-10-26 04:03:37 +00:00
|
|
|
spin_lock(&host->lock);
|
2005-04-16 22:20:36 +00:00
|
|
|
|
2007-10-26 04:03:37 +00:00
|
|
|
for (i = 1; i < 9; i++) {
|
2005-04-16 22:20:36 +00:00
|
|
|
port_no = i - 1;
|
|
|
|
if (port_no > 3)
|
|
|
|
port_no -= 4;
|
2006-08-24 07:19:22 +00:00
|
|
|
if (port_no >= host->n_ports)
|
2005-04-16 22:20:36 +00:00
|
|
|
ap = NULL;
|
|
|
|
else
|
2006-08-24 07:19:22 +00:00
|
|
|
ap = host->ports[port_no];
|
2005-04-16 22:20:36 +00:00
|
|
|
tmp = mask & (1 << i);
|
2021-12-21 07:20:59 +00:00
|
|
|
if (ap)
|
|
|
|
ata_port_dbg(ap, "seq %u, tmp %x\n", i, tmp);
|
2010-05-10 19:41:30 +00:00
|
|
|
if (tmp && ap) {
|
2005-04-16 22:20:36 +00:00
|
|
|
struct ata_queued_cmd *qc;
|
|
|
|
|
2007-08-06 09:36:22 +00:00
|
|
|
qc = ata_qc_from_tag(ap, ap->link.active_tag);
|
2005-09-27 09:39:50 +00:00
|
|
|
if (qc && (!(qc->tf.flags & ATA_TFLAG_POLLING)))
|
2005-04-16 22:20:36 +00:00
|
|
|
handled += pdc20621_host_intr(ap, qc, (i > 4),
|
|
|
|
mmio_base);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2007-10-26 04:03:37 +00:00
|
|
|
spin_unlock(&host->lock);
|
2005-04-16 22:20:36 +00:00
|
|
|
|
|
|
|
return IRQ_RETVAL(handled);
|
|
|
|
}
|
|
|
|
|
2009-04-08 20:02:18 +00:00
|
|
|
static void pdc_freeze(struct ata_port *ap)
|
2005-04-16 22:20:36 +00:00
|
|
|
{
|
2009-04-08 20:02:18 +00:00
|
|
|
void __iomem *mmio = ap->ioaddr.cmd_addr;
|
|
|
|
u32 tmp;
|
2005-04-16 22:20:36 +00:00
|
|
|
|
2009-04-08 20:02:18 +00:00
|
|
|
/* FIXME: if all 4 ATA engines are stopped, also stop HDMA engine */
|
2005-04-16 22:20:36 +00:00
|
|
|
|
2009-04-08 20:02:18 +00:00
|
|
|
tmp = readl(mmio + PDC_CTLSTAT);
|
|
|
|
tmp |= PDC_MASK_INT;
|
|
|
|
tmp &= ~PDC_DMA_ENABLE;
|
|
|
|
writel(tmp, mmio + PDC_CTLSTAT);
|
|
|
|
readl(mmio + PDC_CTLSTAT); /* flush */
|
|
|
|
}
|
2005-08-26 02:01:20 +00:00
|
|
|
|
2009-04-08 20:02:18 +00:00
|
|
|
static void pdc_thaw(struct ata_port *ap)
|
|
|
|
{
|
|
|
|
void __iomem *mmio = ap->ioaddr.cmd_addr;
|
|
|
|
u32 tmp;
|
2005-04-16 22:20:36 +00:00
|
|
|
|
2009-04-08 20:02:18 +00:00
|
|
|
/* FIXME: start HDMA engine, if zero ATA engines running */
|
2005-04-16 22:20:36 +00:00
|
|
|
|
2009-05-13 23:02:21 +00:00
|
|
|
/* clear IRQ */
|
|
|
|
ioread8(ap->ioaddr.status_addr);
|
2005-04-16 22:20:36 +00:00
|
|
|
|
2009-04-08 20:02:18 +00:00
|
|
|
/* turn IRQ back on */
|
|
|
|
tmp = readl(mmio + PDC_CTLSTAT);
|
|
|
|
tmp &= ~PDC_MASK_INT;
|
|
|
|
writel(tmp, mmio + PDC_CTLSTAT);
|
|
|
|
readl(mmio + PDC_CTLSTAT); /* flush */
|
|
|
|
}
|
2005-04-16 22:20:36 +00:00
|
|
|
|
2009-04-08 20:02:18 +00:00
|
|
|
static void pdc_reset_port(struct ata_port *ap)
|
|
|
|
{
|
|
|
|
void __iomem *mmio = ap->ioaddr.cmd_addr + PDC_CTLSTAT;
|
|
|
|
unsigned int i;
|
|
|
|
u32 tmp;
|
|
|
|
|
|
|
|
/* FIXME: handle HDMA copy engine */
|
|
|
|
|
|
|
|
for (i = 11; i > 0; i--) {
|
|
|
|
tmp = readl(mmio);
|
|
|
|
if (tmp & PDC_RESET)
|
|
|
|
break;
|
|
|
|
|
|
|
|
udelay(100);
|
|
|
|
|
|
|
|
tmp |= PDC_RESET;
|
|
|
|
writel(tmp, mmio);
|
2005-04-16 22:20:36 +00:00
|
|
|
}
|
|
|
|
|
2009-04-08 20:02:18 +00:00
|
|
|
tmp &= ~PDC_RESET;
|
|
|
|
writel(tmp, mmio);
|
|
|
|
readl(mmio); /* flush */
|
|
|
|
}
|
|
|
|
|
|
|
|
static int pdc_softreset(struct ata_link *link, unsigned int *class,
|
|
|
|
unsigned long deadline)
|
|
|
|
{
|
|
|
|
pdc_reset_port(link->ap);
|
|
|
|
return ata_sff_softreset(link, class, deadline);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void pdc_error_handler(struct ata_port *ap)
|
|
|
|
{
|
2022-10-07 13:23:38 +00:00
|
|
|
if (!ata_port_is_frozen(ap))
|
2009-04-08 20:02:18 +00:00
|
|
|
pdc_reset_port(ap);
|
|
|
|
|
2010-05-10 19:41:39 +00:00
|
|
|
ata_sff_error_handler(ap);
|
2009-04-08 20:02:18 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
static void pdc_post_internal_cmd(struct ata_queued_cmd *qc)
|
|
|
|
{
|
|
|
|
struct ata_port *ap = qc->ap;
|
|
|
|
|
|
|
|
/* make DMA engine forget about the failed command */
|
2022-12-29 16:59:57 +00:00
|
|
|
if (qc->flags & ATA_QCFLAG_EH)
|
2009-04-08 20:02:18 +00:00
|
|
|
pdc_reset_port(ap);
|
|
|
|
}
|
|
|
|
|
|
|
|
static int pdc_check_atapi_dma(struct ata_queued_cmd *qc)
|
|
|
|
{
|
|
|
|
u8 *scsicmd = qc->scsicmd->cmnd;
|
|
|
|
int pio = 1; /* atapi dma off by default */
|
|
|
|
|
|
|
|
/* Whitelist commands that may use DMA. */
|
|
|
|
switch (scsicmd[0]) {
|
|
|
|
case WRITE_12:
|
|
|
|
case WRITE_10:
|
|
|
|
case WRITE_6:
|
|
|
|
case READ_12:
|
|
|
|
case READ_10:
|
|
|
|
case READ_6:
|
|
|
|
case 0xad: /* READ_DVD_STRUCTURE */
|
|
|
|
case 0xbe: /* READ_CD */
|
|
|
|
pio = 0;
|
|
|
|
}
|
|
|
|
/* -45150 (FFFF4FA2) to -1 (FFFFFFFF) shall use PIO mode */
|
|
|
|
if (scsicmd[0] == WRITE_10) {
|
|
|
|
unsigned int lba =
|
|
|
|
(scsicmd[2] << 24) |
|
|
|
|
(scsicmd[3] << 16) |
|
|
|
|
(scsicmd[4] << 8) |
|
|
|
|
scsicmd[5];
|
|
|
|
if (lba >= 0xFFFF4FA2)
|
|
|
|
pio = 1;
|
|
|
|
}
|
|
|
|
return pio;
|
2005-04-16 22:20:36 +00:00
|
|
|
}
|
|
|
|
|
2005-10-22 18:27:05 +00:00
|
|
|
static void pdc_tf_load_mmio(struct ata_port *ap, const struct ata_taskfile *tf)
|
2005-04-16 22:20:36 +00:00
|
|
|
{
|
2007-10-26 04:03:37 +00:00
|
|
|
WARN_ON(tf->protocol == ATA_PROT_DMA ||
|
2009-05-13 23:02:21 +00:00
|
|
|
tf->protocol == ATAPI_PROT_DMA);
|
2008-04-07 13:47:16 +00:00
|
|
|
ata_sff_tf_load(ap, tf);
|
2005-04-16 22:20:36 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
|
2005-10-22 18:27:05 +00:00
|
|
|
static void pdc_exec_command_mmio(struct ata_port *ap, const struct ata_taskfile *tf)
|
2005-04-16 22:20:36 +00:00
|
|
|
{
|
2007-10-26 04:03:37 +00:00
|
|
|
WARN_ON(tf->protocol == ATA_PROT_DMA ||
|
2009-05-13 23:02:21 +00:00
|
|
|
tf->protocol == ATAPI_PROT_DMA);
|
2008-04-07 13:47:16 +00:00
|
|
|
ata_sff_exec_command(ap, tf);
|
2005-04-16 22:20:36 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
|
2007-02-01 06:06:36 +00:00
|
|
|
static void pdc_sata_setup_port(struct ata_ioports *port, void __iomem *base)
|
2005-04-16 22:20:36 +00:00
|
|
|
{
|
|
|
|
port->cmd_addr = base;
|
|
|
|
port->data_addr = base;
|
|
|
|
port->feature_addr =
|
|
|
|
port->error_addr = base + 0x4;
|
|
|
|
port->nsect_addr = base + 0x8;
|
|
|
|
port->lbal_addr = base + 0xc;
|
|
|
|
port->lbam_addr = base + 0x10;
|
|
|
|
port->lbah_addr = base + 0x14;
|
|
|
|
port->device_addr = base + 0x18;
|
|
|
|
port->command_addr =
|
|
|
|
port->status_addr = base + 0x1c;
|
|
|
|
port->altstatus_addr =
|
|
|
|
port->ctl_addr = base + 0x38;
|
|
|
|
}
|
|
|
|
|
|
|
|
|
libata: convert the remaining SATA drivers to new init model
Convert ahci, sata_sil, sata_sil24, sata_svw, sata_qstor, sata_mv,
sata_sx4, sata_vsc and sata_inic162x to new init model.
Now that host and ap are available during intialization, functions are
converted to take either host or ap instead of low level parameters
which were inevitable for functions shared between init and other
paths. This simplifies code quite a bit.
* init_one()'s now follow more consistent init order
* ahci_setup_port() and ahci_host_init() collapsed into
ahci_init_one() for init order consistency
* sata_vsc uses port_info instead of setting fields manually
* in sata_svw, k2_board_info converted to port_info (info is now in
port flags). port number is honored now.
Tested on ICH7/8 AHCI, jmb360, sil3112, 3114, 3124 and 3132.
Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-17 14:44:08 +00:00
|
|
|
static void pdc20621_get_from_dimm(struct ata_host *host, void *psource,
|
2005-04-16 22:20:36 +00:00
|
|
|
u32 offset, u32 size)
|
|
|
|
{
|
|
|
|
u32 window_size;
|
|
|
|
u16 idx;
|
|
|
|
u8 page_mask;
|
|
|
|
long dist;
|
libata: convert the remaining SATA drivers to new init model
Convert ahci, sata_sil, sata_sil24, sata_svw, sata_qstor, sata_mv,
sata_sx4, sata_vsc and sata_inic162x to new init model.
Now that host and ap are available during intialization, functions are
converted to take either host or ap instead of low level parameters
which were inevitable for functions shared between init and other
paths. This simplifies code quite a bit.
* init_one()'s now follow more consistent init order
* ahci_setup_port() and ahci_host_init() collapsed into
ahci_init_one() for init order consistency
* sata_vsc uses port_info instead of setting fields manually
* in sata_svw, k2_board_info converted to port_info (info is now in
port flags). port number is honored now.
Tested on ICH7/8 AHCI, jmb360, sil3112, 3114, 3124 and 3132.
Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-17 14:44:08 +00:00
|
|
|
void __iomem *mmio = host->iomap[PDC_MMIO_BAR];
|
|
|
|
void __iomem *dimm_mmio = host->iomap[PDC_DIMM_BAR];
|
2005-04-16 22:20:36 +00:00
|
|
|
|
|
|
|
/* hard-code chip #0 */
|
|
|
|
mmio += PDC_CHIP0_OFS;
|
|
|
|
|
2005-07-31 17:13:24 +00:00
|
|
|
page_mask = 0x00;
|
2007-10-26 04:03:37 +00:00
|
|
|
window_size = 0x2000 * 4; /* 32K byte uchar size */
|
2005-07-31 17:13:24 +00:00
|
|
|
idx = (u16) (offset / window_size);
|
2005-04-16 22:20:36 +00:00
|
|
|
|
|
|
|
writel(0x01, mmio + PDC_GENERAL_CTLR);
|
|
|
|
readl(mmio + PDC_GENERAL_CTLR);
|
|
|
|
writel(((idx) << page_mask), mmio + PDC_DIMM_WINDOW_CTLR);
|
|
|
|
readl(mmio + PDC_DIMM_WINDOW_CTLR);
|
|
|
|
|
|
|
|
offset -= (idx * window_size);
|
|
|
|
idx++;
|
ata: sata_sx4: fix pdc20621_get_from_dimm() on 64-bit
gcc warns about a memcpy() with overlapping pointers because of an
incorrect size calculation:
In file included from include/linux/string.h:369,
from drivers/ata/sata_sx4.c:66:
In function 'memcpy_fromio',
inlined from 'pdc20621_get_from_dimm.constprop' at drivers/ata/sata_sx4.c:962:2:
include/linux/fortify-string.h:97:33: error: '__builtin_memcpy' accessing 4294934464 bytes at offsets 0 and [16, 16400] overlaps 6442385281 bytes at offset -2147450817 [-Werror=restrict]
97 | #define __underlying_memcpy __builtin_memcpy
| ^
include/linux/fortify-string.h:620:9: note: in expansion of macro '__underlying_memcpy'
620 | __underlying_##op(p, q, __fortify_size); \
| ^~~~~~~~~~~~~
include/linux/fortify-string.h:665:26: note: in expansion of macro '__fortify_memcpy_chk'
665 | #define memcpy(p, q, s) __fortify_memcpy_chk(p, q, s, \
| ^~~~~~~~~~~~~~~~~~~~
include/asm-generic/io.h:1184:9: note: in expansion of macro 'memcpy'
1184 | memcpy(buffer, __io_virt(addr), size);
| ^~~~~~
The problem here is the overflow of an unsigned 32-bit number to a
negative that gets converted into a signed 'long', keeping a large
positive number.
Replace the complex calculation with a more readable min() variant
that avoids the warning.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
2024-03-26 14:53:37 +00:00
|
|
|
dist = min(size, window_size - offset);
|
2014-03-26 16:34:49 +00:00
|
|
|
memcpy_fromio(psource, dimm_mmio + offset / 4, dist);
|
2005-04-16 22:20:36 +00:00
|
|
|
|
2005-07-31 17:13:24 +00:00
|
|
|
psource += dist;
|
2005-04-16 22:20:36 +00:00
|
|
|
size -= dist;
|
|
|
|
for (; (long) size >= (long) window_size ;) {
|
|
|
|
writel(0x01, mmio + PDC_GENERAL_CTLR);
|
|
|
|
readl(mmio + PDC_GENERAL_CTLR);
|
|
|
|
writel(((idx) << page_mask), mmio + PDC_DIMM_WINDOW_CTLR);
|
|
|
|
readl(mmio + PDC_DIMM_WINDOW_CTLR);
|
2014-03-26 16:34:49 +00:00
|
|
|
memcpy_fromio(psource, dimm_mmio, window_size / 4);
|
2005-04-16 22:20:36 +00:00
|
|
|
psource += window_size;
|
|
|
|
size -= window_size;
|
2007-10-26 04:03:37 +00:00
|
|
|
idx++;
|
2005-04-16 22:20:36 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
if (size) {
|
|
|
|
writel(0x01, mmio + PDC_GENERAL_CTLR);
|
|
|
|
readl(mmio + PDC_GENERAL_CTLR);
|
|
|
|
writel(((idx) << page_mask), mmio + PDC_DIMM_WINDOW_CTLR);
|
|
|
|
readl(mmio + PDC_DIMM_WINDOW_CTLR);
|
2014-03-26 16:34:49 +00:00
|
|
|
memcpy_fromio(psource, dimm_mmio, size / 4);
|
2005-04-16 22:20:36 +00:00
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
|
libata: convert the remaining SATA drivers to new init model
Convert ahci, sata_sil, sata_sil24, sata_svw, sata_qstor, sata_mv,
sata_sx4, sata_vsc and sata_inic162x to new init model.
Now that host and ap are available during intialization, functions are
converted to take either host or ap instead of low level parameters
which were inevitable for functions shared between init and other
paths. This simplifies code quite a bit.
* init_one()'s now follow more consistent init order
* ahci_setup_port() and ahci_host_init() collapsed into
ahci_init_one() for init order consistency
* sata_vsc uses port_info instead of setting fields manually
* in sata_svw, k2_board_info converted to port_info (info is now in
port flags). port number is honored now.
Tested on ICH7/8 AHCI, jmb360, sil3112, 3114, 3124 and 3132.
Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-17 14:44:08 +00:00
|
|
|
static void pdc20621_put_to_dimm(struct ata_host *host, void *psource,
|
2005-04-16 22:20:36 +00:00
|
|
|
u32 offset, u32 size)
|
|
|
|
{
|
|
|
|
u32 window_size;
|
|
|
|
u16 idx;
|
|
|
|
u8 page_mask;
|
|
|
|
long dist;
|
libata: convert the remaining SATA drivers to new init model
Convert ahci, sata_sil, sata_sil24, sata_svw, sata_qstor, sata_mv,
sata_sx4, sata_vsc and sata_inic162x to new init model.
Now that host and ap are available during intialization, functions are
converted to take either host or ap instead of low level parameters
which were inevitable for functions shared between init and other
paths. This simplifies code quite a bit.
* init_one()'s now follow more consistent init order
* ahci_setup_port() and ahci_host_init() collapsed into
ahci_init_one() for init order consistency
* sata_vsc uses port_info instead of setting fields manually
* in sata_svw, k2_board_info converted to port_info (info is now in
port flags). port number is honored now.
Tested on ICH7/8 AHCI, jmb360, sil3112, 3114, 3124 and 3132.
Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-17 14:44:08 +00:00
|
|
|
void __iomem *mmio = host->iomap[PDC_MMIO_BAR];
|
|
|
|
void __iomem *dimm_mmio = host->iomap[PDC_DIMM_BAR];
|
2005-04-16 22:20:36 +00:00
|
|
|
|
2005-07-31 17:13:24 +00:00
|
|
|
/* hard-code chip #0 */
|
2005-04-16 22:20:36 +00:00
|
|
|
mmio += PDC_CHIP0_OFS;
|
|
|
|
|
2005-07-31 17:13:24 +00:00
|
|
|
page_mask = 0x00;
|
2007-10-26 04:03:37 +00:00
|
|
|
window_size = 0x2000 * 4; /* 32K byte uchar size */
|
2005-04-16 22:20:36 +00:00
|
|
|
idx = (u16) (offset / window_size);
|
|
|
|
|
|
|
|
writel(((idx) << page_mask), mmio + PDC_DIMM_WINDOW_CTLR);
|
|
|
|
readl(mmio + PDC_DIMM_WINDOW_CTLR);
|
2005-07-31 17:13:24 +00:00
|
|
|
offset -= (idx * window_size);
|
2005-04-16 22:20:36 +00:00
|
|
|
idx++;
|
ata: sata_sx4: fix pdc20621_get_from_dimm() on 64-bit
gcc warns about a memcpy() with overlapping pointers because of an
incorrect size calculation:
In file included from include/linux/string.h:369,
from drivers/ata/sata_sx4.c:66:
In function 'memcpy_fromio',
inlined from 'pdc20621_get_from_dimm.constprop' at drivers/ata/sata_sx4.c:962:2:
include/linux/fortify-string.h:97:33: error: '__builtin_memcpy' accessing 4294934464 bytes at offsets 0 and [16, 16400] overlaps 6442385281 bytes at offset -2147450817 [-Werror=restrict]
97 | #define __underlying_memcpy __builtin_memcpy
| ^
include/linux/fortify-string.h:620:9: note: in expansion of macro '__underlying_memcpy'
620 | __underlying_##op(p, q, __fortify_size); \
| ^~~~~~~~~~~~~
include/linux/fortify-string.h:665:26: note: in expansion of macro '__fortify_memcpy_chk'
665 | #define memcpy(p, q, s) __fortify_memcpy_chk(p, q, s, \
| ^~~~~~~~~~~~~~~~~~~~
include/asm-generic/io.h:1184:9: note: in expansion of macro 'memcpy'
1184 | memcpy(buffer, __io_virt(addr), size);
| ^~~~~~
The problem here is the overflow of an unsigned 32-bit number to a
negative that gets converted into a signed 'long', keeping a large
positive number.
Replace the complex calculation with a more readable min() variant
that avoids the warning.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
2024-03-26 14:53:37 +00:00
|
|
|
dist = min(size, window_size - offset);
|
2005-10-21 05:46:02 +00:00
|
|
|
memcpy_toio(dimm_mmio + offset / 4, psource, dist);
|
2005-04-16 22:20:36 +00:00
|
|
|
writel(0x01, mmio + PDC_GENERAL_CTLR);
|
|
|
|
readl(mmio + PDC_GENERAL_CTLR);
|
|
|
|
|
2005-07-31 17:13:24 +00:00
|
|
|
psource += dist;
|
2005-04-16 22:20:36 +00:00
|
|
|
size -= dist;
|
|
|
|
for (; (long) size >= (long) window_size ;) {
|
|
|
|
writel(((idx) << page_mask), mmio + PDC_DIMM_WINDOW_CTLR);
|
|
|
|
readl(mmio + PDC_DIMM_WINDOW_CTLR);
|
2005-10-21 05:46:02 +00:00
|
|
|
memcpy_toio(dimm_mmio, psource, window_size / 4);
|
2005-04-16 22:20:36 +00:00
|
|
|
writel(0x01, mmio + PDC_GENERAL_CTLR);
|
|
|
|
readl(mmio + PDC_GENERAL_CTLR);
|
|
|
|
psource += window_size;
|
|
|
|
size -= window_size;
|
2007-10-26 04:03:37 +00:00
|
|
|
idx++;
|
2005-04-16 22:20:36 +00:00
|
|
|
}
|
2005-07-31 17:13:24 +00:00
|
|
|
|
2005-04-16 22:20:36 +00:00
|
|
|
if (size) {
|
|
|
|
writel(((idx) << page_mask), mmio + PDC_DIMM_WINDOW_CTLR);
|
|
|
|
readl(mmio + PDC_DIMM_WINDOW_CTLR);
|
2005-10-21 05:46:02 +00:00
|
|
|
memcpy_toio(dimm_mmio, psource, size / 4);
|
2005-04-16 22:20:36 +00:00
|
|
|
writel(0x01, mmio + PDC_GENERAL_CTLR);
|
|
|
|
readl(mmio + PDC_GENERAL_CTLR);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
|
libata: convert the remaining SATA drivers to new init model
Convert ahci, sata_sil, sata_sil24, sata_svw, sata_qstor, sata_mv,
sata_sx4, sata_vsc and sata_inic162x to new init model.
Now that host and ap are available during intialization, functions are
converted to take either host or ap instead of low level parameters
which were inevitable for functions shared between init and other
paths. This simplifies code quite a bit.
* init_one()'s now follow more consistent init order
* ahci_setup_port() and ahci_host_init() collapsed into
ahci_init_one() for init order consistency
* sata_vsc uses port_info instead of setting fields manually
* in sata_svw, k2_board_info converted to port_info (info is now in
port flags). port number is honored now.
Tested on ICH7/8 AHCI, jmb360, sil3112, 3114, 3124 and 3132.
Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-17 14:44:08 +00:00
|
|
|
static unsigned int pdc20621_i2c_read(struct ata_host *host, u32 device,
|
2005-04-16 22:20:36 +00:00
|
|
|
u32 subaddr, u32 *pdata)
|
|
|
|
{
|
libata: convert the remaining SATA drivers to new init model
Convert ahci, sata_sil, sata_sil24, sata_svw, sata_qstor, sata_mv,
sata_sx4, sata_vsc and sata_inic162x to new init model.
Now that host and ap are available during intialization, functions are
converted to take either host or ap instead of low level parameters
which were inevitable for functions shared between init and other
paths. This simplifies code quite a bit.
* init_one()'s now follow more consistent init order
* ahci_setup_port() and ahci_host_init() collapsed into
ahci_init_one() for init order consistency
* sata_vsc uses port_info instead of setting fields manually
* in sata_svw, k2_board_info converted to port_info (info is now in
port flags). port number is honored now.
Tested on ICH7/8 AHCI, jmb360, sil3112, 3114, 3124 and 3132.
Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-17 14:44:08 +00:00
|
|
|
void __iomem *mmio = host->iomap[PDC_MMIO_BAR];
|
2005-04-16 22:20:36 +00:00
|
|
|
u32 i2creg = 0;
|
2005-07-31 17:13:24 +00:00
|
|
|
u32 status;
|
2007-10-26 04:03:37 +00:00
|
|
|
u32 count = 0;
|
2005-04-16 22:20:36 +00:00
|
|
|
|
|
|
|
/* hard-code chip #0 */
|
|
|
|
mmio += PDC_CHIP0_OFS;
|
|
|
|
|
|
|
|
i2creg |= device << 24;
|
|
|
|
i2creg |= subaddr << 16;
|
|
|
|
|
|
|
|
/* Set the device and subaddress */
|
2007-05-28 02:58:54 +00:00
|
|
|
writel(i2creg, mmio + PDC_I2C_ADDR_DATA);
|
|
|
|
readl(mmio + PDC_I2C_ADDR_DATA);
|
2005-04-16 22:20:36 +00:00
|
|
|
|
|
|
|
/* Write Control to perform read operation, mask int */
|
2005-07-31 17:13:24 +00:00
|
|
|
writel(PDC_I2C_READ | PDC_I2C_START | PDC_I2C_MASK_INT,
|
2007-05-28 02:58:54 +00:00
|
|
|
mmio + PDC_I2C_CONTROL);
|
2005-04-16 22:20:36 +00:00
|
|
|
|
|
|
|
for (count = 0; count <= 1000; count ++) {
|
2007-05-28 02:58:54 +00:00
|
|
|
status = readl(mmio + PDC_I2C_CONTROL);
|
2005-04-16 22:20:36 +00:00
|
|
|
if (status & PDC_I2C_COMPLETE) {
|
2007-05-28 02:58:54 +00:00
|
|
|
status = readl(mmio + PDC_I2C_ADDR_DATA);
|
2005-04-16 22:20:36 +00:00
|
|
|
break;
|
|
|
|
} else if (count == 1000)
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
*pdata = (status >> 8) & 0x000000ff;
|
2005-07-31 17:13:24 +00:00
|
|
|
return 1;
|
2005-04-16 22:20:36 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
|
libata: convert the remaining SATA drivers to new init model
Convert ahci, sata_sil, sata_sil24, sata_svw, sata_qstor, sata_mv,
sata_sx4, sata_vsc and sata_inic162x to new init model.
Now that host and ap are available during intialization, functions are
converted to take either host or ap instead of low level parameters
which were inevitable for functions shared between init and other
paths. This simplifies code quite a bit.
* init_one()'s now follow more consistent init order
* ahci_setup_port() and ahci_host_init() collapsed into
ahci_init_one() for init order consistency
* sata_vsc uses port_info instead of setting fields manually
* in sata_svw, k2_board_info converted to port_info (info is now in
port flags). port number is honored now.
Tested on ICH7/8 AHCI, jmb360, sil3112, 3114, 3124 and 3132.
Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-17 14:44:08 +00:00
|
|
|
static int pdc20621_detect_dimm(struct ata_host *host)
|
2005-04-16 22:20:36 +00:00
|
|
|
{
|
2007-10-26 04:03:37 +00:00
|
|
|
u32 data = 0;
|
libata: convert the remaining SATA drivers to new init model
Convert ahci, sata_sil, sata_sil24, sata_svw, sata_qstor, sata_mv,
sata_sx4, sata_vsc and sata_inic162x to new init model.
Now that host and ap are available during intialization, functions are
converted to take either host or ap instead of low level parameters
which were inevitable for functions shared between init and other
paths. This simplifies code quite a bit.
* init_one()'s now follow more consistent init order
* ahci_setup_port() and ahci_host_init() collapsed into
ahci_init_one() for init order consistency
* sata_vsc uses port_info instead of setting fields manually
* in sata_svw, k2_board_info converted to port_info (info is now in
port flags). port number is honored now.
Tested on ICH7/8 AHCI, jmb360, sil3112, 3114, 3124 and 3132.
Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-17 14:44:08 +00:00
|
|
|
if (pdc20621_i2c_read(host, PDC_DIMM0_SPD_DEV_ADDRESS,
|
2005-04-16 22:20:36 +00:00
|
|
|
PDC_DIMM_SPD_SYSTEM_FREQ, &data)) {
|
2007-10-26 04:03:37 +00:00
|
|
|
if (data == 100)
|
2005-04-16 22:20:36 +00:00
|
|
|
return 100;
|
2007-10-26 04:03:37 +00:00
|
|
|
} else
|
2005-04-16 22:20:36 +00:00
|
|
|
return 0;
|
2005-07-31 17:13:24 +00:00
|
|
|
|
libata: convert the remaining SATA drivers to new init model
Convert ahci, sata_sil, sata_sil24, sata_svw, sata_qstor, sata_mv,
sata_sx4, sata_vsc and sata_inic162x to new init model.
Now that host and ap are available during intialization, functions are
converted to take either host or ap instead of low level parameters
which were inevitable for functions shared between init and other
paths. This simplifies code quite a bit.
* init_one()'s now follow more consistent init order
* ahci_setup_port() and ahci_host_init() collapsed into
ahci_init_one() for init order consistency
* sata_vsc uses port_info instead of setting fields manually
* in sata_svw, k2_board_info converted to port_info (info is now in
port flags). port number is honored now.
Tested on ICH7/8 AHCI, jmb360, sil3112, 3114, 3124 and 3132.
Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-17 14:44:08 +00:00
|
|
|
if (pdc20621_i2c_read(host, PDC_DIMM0_SPD_DEV_ADDRESS, 9, &data)) {
|
2007-10-26 00:47:30 +00:00
|
|
|
if (data <= 0x75)
|
2005-04-16 22:20:36 +00:00
|
|
|
return 133;
|
2007-10-26 04:03:37 +00:00
|
|
|
} else
|
2005-04-16 22:20:36 +00:00
|
|
|
return 0;
|
2005-07-31 17:13:24 +00:00
|
|
|
|
2007-10-26 04:03:37 +00:00
|
|
|
return 0;
|
2005-04-16 22:20:36 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
|
libata: convert the remaining SATA drivers to new init model
Convert ahci, sata_sil, sata_sil24, sata_svw, sata_qstor, sata_mv,
sata_sx4, sata_vsc and sata_inic162x to new init model.
Now that host and ap are available during intialization, functions are
converted to take either host or ap instead of low level parameters
which were inevitable for functions shared between init and other
paths. This simplifies code quite a bit.
* init_one()'s now follow more consistent init order
* ahci_setup_port() and ahci_host_init() collapsed into
ahci_init_one() for init order consistency
* sata_vsc uses port_info instead of setting fields manually
* in sata_svw, k2_board_info converted to port_info (info is now in
port flags). port number is honored now.
Tested on ICH7/8 AHCI, jmb360, sil3112, 3114, 3124 and 3132.
Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-17 14:44:08 +00:00
|
|
|
static int pdc20621_prog_dimm0(struct ata_host *host)
|
2005-04-16 22:20:36 +00:00
|
|
|
{
|
|
|
|
u32 spd0[50];
|
|
|
|
u32 data = 0;
|
2007-10-26 04:03:37 +00:00
|
|
|
int size, i;
|
|
|
|
u8 bdimmsize;
|
libata: convert the remaining SATA drivers to new init model
Convert ahci, sata_sil, sata_sil24, sata_svw, sata_qstor, sata_mv,
sata_sx4, sata_vsc and sata_inic162x to new init model.
Now that host and ap are available during intialization, functions are
converted to take either host or ap instead of low level parameters
which were inevitable for functions shared between init and other
paths. This simplifies code quite a bit.
* init_one()'s now follow more consistent init order
* ahci_setup_port() and ahci_host_init() collapsed into
ahci_init_one() for init order consistency
* sata_vsc uses port_info instead of setting fields manually
* in sata_svw, k2_board_info converted to port_info (info is now in
port flags). port number is honored now.
Tested on ICH7/8 AHCI, jmb360, sil3112, 3114, 3124 and 3132.
Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-17 14:44:08 +00:00
|
|
|
void __iomem *mmio = host->iomap[PDC_MMIO_BAR];
|
2005-04-16 22:20:36 +00:00
|
|
|
static const struct {
|
|
|
|
unsigned int reg;
|
|
|
|
unsigned int ofs;
|
|
|
|
} pdc_i2c_read_data [] = {
|
2005-07-31 17:13:24 +00:00
|
|
|
{ PDC_DIMM_SPD_TYPE, 11 },
|
2005-04-16 22:20:36 +00:00
|
|
|
{ PDC_DIMM_SPD_FRESH_RATE, 12 },
|
2005-07-31 17:13:24 +00:00
|
|
|
{ PDC_DIMM_SPD_COLUMN_NUM, 4 },
|
2005-04-16 22:20:36 +00:00
|
|
|
{ PDC_DIMM_SPD_ATTRIBUTE, 21 },
|
|
|
|
{ PDC_DIMM_SPD_ROW_NUM, 3 },
|
|
|
|
{ PDC_DIMM_SPD_BANK_NUM, 17 },
|
|
|
|
{ PDC_DIMM_SPD_MODULE_ROW, 5 },
|
|
|
|
{ PDC_DIMM_SPD_ROW_PRE_CHARGE, 27 },
|
|
|
|
{ PDC_DIMM_SPD_ROW_ACTIVE_DELAY, 28 },
|
|
|
|
{ PDC_DIMM_SPD_RAS_CAS_DELAY, 29 },
|
|
|
|
{ PDC_DIMM_SPD_ACTIVE_PRECHARGE, 30 },
|
2005-07-31 17:13:24 +00:00
|
|
|
{ PDC_DIMM_SPD_CAS_LATENCY, 18 },
|
2005-04-16 22:20:36 +00:00
|
|
|
};
|
|
|
|
|
|
|
|
/* hard-code chip #0 */
|
|
|
|
mmio += PDC_CHIP0_OFS;
|
|
|
|
|
2007-10-26 04:03:37 +00:00
|
|
|
for (i = 0; i < ARRAY_SIZE(pdc_i2c_read_data); i++)
|
libata: convert the remaining SATA drivers to new init model
Convert ahci, sata_sil, sata_sil24, sata_svw, sata_qstor, sata_mv,
sata_sx4, sata_vsc and sata_inic162x to new init model.
Now that host and ap are available during intialization, functions are
converted to take either host or ap instead of low level parameters
which were inevitable for functions shared between init and other
paths. This simplifies code quite a bit.
* init_one()'s now follow more consistent init order
* ahci_setup_port() and ahci_host_init() collapsed into
ahci_init_one() for init order consistency
* sata_vsc uses port_info instead of setting fields manually
* in sata_svw, k2_board_info converted to port_info (info is now in
port flags). port number is honored now.
Tested on ICH7/8 AHCI, jmb360, sil3112, 3114, 3124 and 3132.
Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-17 14:44:08 +00:00
|
|
|
pdc20621_i2c_read(host, PDC_DIMM0_SPD_DEV_ADDRESS,
|
2005-07-31 17:13:24 +00:00
|
|
|
pdc_i2c_read_data[i].reg,
|
2005-04-16 22:20:36 +00:00
|
|
|
&spd0[pdc_i2c_read_data[i].ofs]);
|
2005-07-31 17:13:24 +00:00
|
|
|
|
2007-10-26 04:03:37 +00:00
|
|
|
data |= (spd0[4] - 8) | ((spd0[21] != 0) << 3) | ((spd0[3]-11) << 4);
|
|
|
|
data |= ((spd0[17] / 4) << 6) | ((spd0[5] / 2) << 7) |
|
2005-04-16 22:20:36 +00:00
|
|
|
((((spd0[27] + 9) / 10) - 1) << 8) ;
|
2007-10-26 04:03:37 +00:00
|
|
|
data |= (((((spd0[29] > spd0[28])
|
2005-07-31 17:13:24 +00:00
|
|
|
? spd0[29] : spd0[28]) + 9) / 10) - 1) << 10;
|
2007-10-26 04:03:37 +00:00
|
|
|
data |= ((spd0[30] - spd0[29] + 9) / 10 - 2) << 12;
|
2005-07-31 17:13:24 +00:00
|
|
|
|
2007-10-26 04:03:37 +00:00
|
|
|
if (spd0[18] & 0x08)
|
2005-04-16 22:20:36 +00:00
|
|
|
data |= ((0x03) << 14);
|
2007-10-26 04:03:37 +00:00
|
|
|
else if (spd0[18] & 0x04)
|
2005-04-16 22:20:36 +00:00
|
|
|
data |= ((0x02) << 14);
|
2007-10-26 04:03:37 +00:00
|
|
|
else if (spd0[18] & 0x01)
|
2005-04-16 22:20:36 +00:00
|
|
|
data |= ((0x01) << 14);
|
2007-10-26 04:03:37 +00:00
|
|
|
else
|
2005-04-16 22:20:36 +00:00
|
|
|
data |= (0 << 14);
|
|
|
|
|
2007-10-26 04:03:37 +00:00
|
|
|
/*
|
2005-04-16 22:20:36 +00:00
|
|
|
Calculate the size of bDIMMSize (power of 2) and
|
|
|
|
merge the DIMM size by program start/end address.
|
|
|
|
*/
|
|
|
|
|
2007-10-26 04:03:37 +00:00
|
|
|
bdimmsize = spd0[4] + (spd0[5] / 2) + spd0[3] + (spd0[17] / 2) + 3;
|
|
|
|
size = (1 << bdimmsize) >> 20; /* size = xxx(MB) */
|
|
|
|
data |= (((size / 16) - 1) << 16);
|
|
|
|
data |= (0 << 23);
|
2005-04-16 22:20:36 +00:00
|
|
|
data |= 8;
|
2007-10-26 04:03:37 +00:00
|
|
|
writel(data, mmio + PDC_DIMM0_CONTROL);
|
2007-05-28 02:58:54 +00:00
|
|
|
readl(mmio + PDC_DIMM0_CONTROL);
|
2007-10-26 04:03:37 +00:00
|
|
|
return size;
|
2005-04-16 22:20:36 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
|
libata: convert the remaining SATA drivers to new init model
Convert ahci, sata_sil, sata_sil24, sata_svw, sata_qstor, sata_mv,
sata_sx4, sata_vsc and sata_inic162x to new init model.
Now that host and ap are available during intialization, functions are
converted to take either host or ap instead of low level parameters
which were inevitable for functions shared between init and other
paths. This simplifies code quite a bit.
* init_one()'s now follow more consistent init order
* ahci_setup_port() and ahci_host_init() collapsed into
ahci_init_one() for init order consistency
* sata_vsc uses port_info instead of setting fields manually
* in sata_svw, k2_board_info converted to port_info (info is now in
port flags). port number is honored now.
Tested on ICH7/8 AHCI, jmb360, sil3112, 3114, 3124 and 3132.
Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-17 14:44:08 +00:00
|
|
|
static unsigned int pdc20621_prog_dimm_global(struct ata_host *host)
|
2005-04-16 22:20:36 +00:00
|
|
|
{
|
|
|
|
u32 data, spd0;
|
2007-02-01 06:06:36 +00:00
|
|
|
int error, i;
|
libata: convert the remaining SATA drivers to new init model
Convert ahci, sata_sil, sata_sil24, sata_svw, sata_qstor, sata_mv,
sata_sx4, sata_vsc and sata_inic162x to new init model.
Now that host and ap are available during intialization, functions are
converted to take either host or ap instead of low level parameters
which were inevitable for functions shared between init and other
paths. This simplifies code quite a bit.
* init_one()'s now follow more consistent init order
* ahci_setup_port() and ahci_host_init() collapsed into
ahci_init_one() for init order consistency
* sata_vsc uses port_info instead of setting fields manually
* in sata_svw, k2_board_info converted to port_info (info is now in
port flags). port number is honored now.
Tested on ICH7/8 AHCI, jmb360, sil3112, 3114, 3124 and 3132.
Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-17 14:44:08 +00:00
|
|
|
void __iomem *mmio = host->iomap[PDC_MMIO_BAR];
|
2005-04-16 22:20:36 +00:00
|
|
|
|
|
|
|
/* hard-code chip #0 */
|
2007-10-26 04:03:37 +00:00
|
|
|
mmio += PDC_CHIP0_OFS;
|
2005-04-16 22:20:36 +00:00
|
|
|
|
2007-10-26 04:03:37 +00:00
|
|
|
/*
|
2005-04-16 22:20:36 +00:00
|
|
|
Set To Default : DIMM Module Global Control Register (0x022259F1)
|
|
|
|
DIMM Arbitration Disable (bit 20)
|
|
|
|
DIMM Data/Control Output Driving Selection (bit12 - bit15)
|
|
|
|
Refresh Enable (bit 17)
|
|
|
|
*/
|
|
|
|
|
2005-07-31 17:13:24 +00:00
|
|
|
data = 0x022259F1;
|
2007-05-28 02:58:54 +00:00
|
|
|
writel(data, mmio + PDC_SDRAM_CONTROL);
|
|
|
|
readl(mmio + PDC_SDRAM_CONTROL);
|
2005-04-16 22:20:36 +00:00
|
|
|
|
|
|
|
/* Turn on for ECC */
|
2015-08-03 19:18:13 +00:00
|
|
|
if (!pdc20621_i2c_read(host, PDC_DIMM0_SPD_DEV_ADDRESS,
|
|
|
|
PDC_DIMM_SPD_TYPE, &spd0)) {
|
2021-12-21 07:21:21 +00:00
|
|
|
dev_err(host->dev,
|
|
|
|
"Failed in i2c read: device=%#x, subaddr=%#x\n",
|
|
|
|
PDC_DIMM0_SPD_DEV_ADDRESS, PDC_DIMM_SPD_TYPE);
|
2015-08-03 19:18:13 +00:00
|
|
|
return 1;
|
|
|
|
}
|
2005-04-16 22:20:36 +00:00
|
|
|
if (spd0 == 0x02) {
|
|
|
|
data |= (0x01 << 16);
|
2007-05-28 02:58:54 +00:00
|
|
|
writel(data, mmio + PDC_SDRAM_CONTROL);
|
|
|
|
readl(mmio + PDC_SDRAM_CONTROL);
|
2021-12-21 07:21:21 +00:00
|
|
|
dev_err(host->dev, "Local DIMM ECC Enabled\n");
|
2007-10-26 04:03:37 +00:00
|
|
|
}
|
2005-04-16 22:20:36 +00:00
|
|
|
|
2007-10-26 04:03:37 +00:00
|
|
|
/* DIMM Initialization Select/Enable (bit 18/19) */
|
|
|
|
data &= (~(1<<18));
|
|
|
|
data |= (1<<19);
|
|
|
|
writel(data, mmio + PDC_SDRAM_CONTROL);
|
2005-04-16 22:20:36 +00:00
|
|
|
|
2007-10-26 04:03:37 +00:00
|
|
|
error = 1;
|
|
|
|
for (i = 1; i <= 10; i++) { /* polling ~5 secs */
|
2007-05-28 02:58:54 +00:00
|
|
|
data = readl(mmio + PDC_SDRAM_CONTROL);
|
2005-04-16 22:20:36 +00:00
|
|
|
if (!(data & (1<<19))) {
|
2007-10-26 04:03:37 +00:00
|
|
|
error = 0;
|
|
|
|
break;
|
2005-04-16 22:20:36 +00:00
|
|
|
}
|
|
|
|
msleep(i*100);
|
2007-10-26 04:03:37 +00:00
|
|
|
}
|
|
|
|
return error;
|
2005-04-16 22:20:36 +00:00
|
|
|
}
|
2005-07-31 17:13:24 +00:00
|
|
|
|
2005-04-16 22:20:36 +00:00
|
|
|
|
libata: convert the remaining SATA drivers to new init model
Convert ahci, sata_sil, sata_sil24, sata_svw, sata_qstor, sata_mv,
sata_sx4, sata_vsc and sata_inic162x to new init model.
Now that host and ap are available during intialization, functions are
converted to take either host or ap instead of low level parameters
which were inevitable for functions shared between init and other
paths. This simplifies code quite a bit.
* init_one()'s now follow more consistent init order
* ahci_setup_port() and ahci_host_init() collapsed into
ahci_init_one() for init order consistency
* sata_vsc uses port_info instead of setting fields manually
* in sata_svw, k2_board_info converted to port_info (info is now in
port flags). port number is honored now.
Tested on ICH7/8 AHCI, jmb360, sil3112, 3114, 3124 and 3132.
Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-17 14:44:08 +00:00
|
|
|
static unsigned int pdc20621_dimm_init(struct ata_host *host)
|
2005-04-16 22:20:36 +00:00
|
|
|
{
|
2005-07-31 17:13:24 +00:00
|
|
|
int speed, size, length;
|
2007-10-26 04:03:37 +00:00
|
|
|
u32 addr, spd0, pci_status;
|
|
|
|
u32 time_period = 0;
|
|
|
|
u32 tcount = 0;
|
|
|
|
u32 ticks = 0;
|
|
|
|
u32 clock = 0;
|
|
|
|
u32 fparam = 0;
|
libata: convert the remaining SATA drivers to new init model
Convert ahci, sata_sil, sata_sil24, sata_svw, sata_qstor, sata_mv,
sata_sx4, sata_vsc and sata_inic162x to new init model.
Now that host and ap are available during intialization, functions are
converted to take either host or ap instead of low level parameters
which were inevitable for functions shared between init and other
paths. This simplifies code quite a bit.
* init_one()'s now follow more consistent init order
* ahci_setup_port() and ahci_host_init() collapsed into
ahci_init_one() for init order consistency
* sata_vsc uses port_info instead of setting fields manually
* in sata_svw, k2_board_info converted to port_info (info is now in
port flags). port number is honored now.
Tested on ICH7/8 AHCI, jmb360, sil3112, 3114, 3124 and 3132.
Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-17 14:44:08 +00:00
|
|
|
void __iomem *mmio = host->iomap[PDC_MMIO_BAR];
|
2005-04-16 22:20:36 +00:00
|
|
|
|
|
|
|
/* hard-code chip #0 */
|
2007-10-26 04:03:37 +00:00
|
|
|
mmio += PDC_CHIP0_OFS;
|
2005-04-16 22:20:36 +00:00
|
|
|
|
|
|
|
/* Initialize PLL based upon PCI Bus Frequency */
|
|
|
|
|
|
|
|
/* Initialize Time Period Register */
|
|
|
|
writel(0xffffffff, mmio + PDC_TIME_PERIOD);
|
|
|
|
time_period = readl(mmio + PDC_TIME_PERIOD);
|
2021-12-21 07:20:59 +00:00
|
|
|
dev_dbg(host->dev, "Time Period Register (0x40): 0x%x\n", time_period);
|
2005-04-16 22:20:36 +00:00
|
|
|
|
|
|
|
/* Enable timer */
|
2007-05-28 02:58:54 +00:00
|
|
|
writel(PDC_TIMER_DEFAULT, mmio + PDC_TIME_CONTROL);
|
2005-04-16 22:20:36 +00:00
|
|
|
readl(mmio + PDC_TIME_CONTROL);
|
|
|
|
|
|
|
|
/* Wait 3 seconds */
|
|
|
|
msleep(3000);
|
|
|
|
|
2005-07-31 17:13:24 +00:00
|
|
|
/*
|
2005-04-16 22:20:36 +00:00
|
|
|
When timer is enabled, counter is decreased every internal
|
|
|
|
clock cycle.
|
|
|
|
*/
|
|
|
|
|
|
|
|
tcount = readl(mmio + PDC_TIME_COUNTER);
|
2021-12-21 07:20:59 +00:00
|
|
|
dev_dbg(host->dev, "Time Counter Register (0x44): 0x%x\n", tcount);
|
2005-04-16 22:20:36 +00:00
|
|
|
|
2005-07-31 17:13:24 +00:00
|
|
|
/*
|
2005-04-16 22:20:36 +00:00
|
|
|
If SX4 is on PCI-X bus, after 3 seconds, the timer counter
|
|
|
|
register should be >= (0xffffffff - 3x10^8).
|
|
|
|
*/
|
2007-10-26 00:47:30 +00:00
|
|
|
if (tcount >= PCI_X_TCOUNT) {
|
2005-04-16 22:20:36 +00:00
|
|
|
ticks = (time_period - tcount);
|
2021-12-21 07:20:59 +00:00
|
|
|
dev_dbg(host->dev, "Num counters 0x%x (%d)\n", ticks, ticks);
|
2005-07-31 17:13:24 +00:00
|
|
|
|
2005-04-16 22:20:36 +00:00
|
|
|
clock = (ticks / 300000);
|
2021-12-21 07:20:59 +00:00
|
|
|
dev_dbg(host->dev, "10 * Internal clk = 0x%x (%d)\n",
|
|
|
|
clock, clock);
|
2005-07-31 17:13:24 +00:00
|
|
|
|
2005-04-16 22:20:36 +00:00
|
|
|
clock = (clock * 33);
|
2021-12-21 07:20:59 +00:00
|
|
|
dev_dbg(host->dev, "10 * Internal clk * 33 = 0x%x (%d)\n",
|
|
|
|
clock, clock);
|
2005-04-16 22:20:36 +00:00
|
|
|
|
|
|
|
/* PLL F Param (bit 22:16) */
|
|
|
|
fparam = (1400000 / clock) - 2;
|
2021-12-21 07:20:59 +00:00
|
|
|
dev_dbg(host->dev, "PLL F Param: 0x%x (%d)\n", fparam, fparam);
|
2005-07-31 17:13:24 +00:00
|
|
|
|
2005-04-16 22:20:36 +00:00
|
|
|
/* OD param = 0x2 (bit 31:30), R param = 0x5 (bit 29:25) */
|
|
|
|
pci_status = (0x8a001824 | (fparam << 16));
|
|
|
|
} else
|
|
|
|
pci_status = PCI_PLL_INIT;
|
|
|
|
|
|
|
|
/* Initialize PLL. */
|
2021-12-21 07:20:59 +00:00
|
|
|
dev_dbg(host->dev, "pci_status: 0x%x\n", pci_status);
|
2005-04-16 22:20:36 +00:00
|
|
|
writel(pci_status, mmio + PDC_CTL_STATUS);
|
|
|
|
readl(mmio + PDC_CTL_STATUS);
|
|
|
|
|
2005-07-31 17:13:24 +00:00
|
|
|
/*
|
2005-04-16 22:20:36 +00:00
|
|
|
Read SPD of DIMM by I2C interface,
|
|
|
|
and program the DIMM Module Controller.
|
|
|
|
*/
|
libata: convert the remaining SATA drivers to new init model
Convert ahci, sata_sil, sata_sil24, sata_svw, sata_qstor, sata_mv,
sata_sx4, sata_vsc and sata_inic162x to new init model.
Now that host and ap are available during intialization, functions are
converted to take either host or ap instead of low level parameters
which were inevitable for functions shared between init and other
paths. This simplifies code quite a bit.
* init_one()'s now follow more consistent init order
* ahci_setup_port() and ahci_host_init() collapsed into
ahci_init_one() for init order consistency
* sata_vsc uses port_info instead of setting fields manually
* in sata_svw, k2_board_info converted to port_info (info is now in
port flags). port number is honored now.
Tested on ICH7/8 AHCI, jmb360, sil3112, 3114, 3124 and 3132.
Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-17 14:44:08 +00:00
|
|
|
if (!(speed = pdc20621_detect_dimm(host))) {
|
2021-12-21 07:21:21 +00:00
|
|
|
dev_err(host->dev, "Detect Local DIMM Fail\n");
|
2005-04-16 22:20:36 +00:00
|
|
|
return 1; /* DIMM error */
|
2007-10-26 04:03:37 +00:00
|
|
|
}
|
2021-12-21 07:20:59 +00:00
|
|
|
dev_dbg(host->dev, "Local DIMM Speed = %d\n", speed);
|
2005-04-16 22:20:36 +00:00
|
|
|
|
2007-10-26 04:03:37 +00:00
|
|
|
/* Programming DIMM0 Module Control Register (index_CID0:80h) */
|
libata: convert the remaining SATA drivers to new init model
Convert ahci, sata_sil, sata_sil24, sata_svw, sata_qstor, sata_mv,
sata_sx4, sata_vsc and sata_inic162x to new init model.
Now that host and ap are available during intialization, functions are
converted to take either host or ap instead of low level parameters
which were inevitable for functions shared between init and other
paths. This simplifies code quite a bit.
* init_one()'s now follow more consistent init order
* ahci_setup_port() and ahci_host_init() collapsed into
ahci_init_one() for init order consistency
* sata_vsc uses port_info instead of setting fields manually
* in sata_svw, k2_board_info converted to port_info (info is now in
port flags). port number is honored now.
Tested on ICH7/8 AHCI, jmb360, sil3112, 3114, 3124 and 3132.
Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-17 14:44:08 +00:00
|
|
|
size = pdc20621_prog_dimm0(host);
|
2021-12-21 07:20:59 +00:00
|
|
|
dev_dbg(host->dev, "Local DIMM Size = %dMB\n", size);
|
2005-04-16 22:20:36 +00:00
|
|
|
|
2007-10-26 04:03:37 +00:00
|
|
|
/* Programming DIMM Module Global Control Register (index_CID0:88h) */
|
libata: convert the remaining SATA drivers to new init model
Convert ahci, sata_sil, sata_sil24, sata_svw, sata_qstor, sata_mv,
sata_sx4, sata_vsc and sata_inic162x to new init model.
Now that host and ap are available during intialization, functions are
converted to take either host or ap instead of low level parameters
which were inevitable for functions shared between init and other
paths. This simplifies code quite a bit.
* init_one()'s now follow more consistent init order
* ahci_setup_port() and ahci_host_init() collapsed into
ahci_init_one() for init order consistency
* sata_vsc uses port_info instead of setting fields manually
* in sata_svw, k2_board_info converted to port_info (info is now in
port flags). port number is honored now.
Tested on ICH7/8 AHCI, jmb360, sil3112, 3114, 3124 and 3132.
Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-17 14:44:08 +00:00
|
|
|
if (pdc20621_prog_dimm_global(host)) {
|
2021-12-21 07:20:59 +00:00
|
|
|
dev_err(host->dev,
|
|
|
|
"Programming DIMM Module Global Control Register Fail\n");
|
2005-04-16 22:20:36 +00:00
|
|
|
return 1;
|
2007-10-26 04:03:37 +00:00
|
|
|
}
|
2005-04-16 22:20:36 +00:00
|
|
|
|
2021-12-21 07:21:00 +00:00
|
|
|
if (dimm_test) {
|
2007-10-26 04:03:37 +00:00
|
|
|
u8 test_parttern1[40] =
|
|
|
|
{0x55,0xAA,'P','r','o','m','i','s','e',' ',
|
|
|
|
'N','o','t',' ','Y','e','t',' ',
|
|
|
|
'D','e','f','i','n','e','d',' ',
|
|
|
|
'1','.','1','0',
|
|
|
|
'9','8','0','3','1','6','1','2',0,0};
|
2005-04-16 22:20:36 +00:00
|
|
|
u8 test_parttern2[40] = {0};
|
|
|
|
|
2007-10-26 04:03:37 +00:00
|
|
|
pdc20621_put_to_dimm(host, test_parttern2, 0x10040, 40);
|
|
|
|
pdc20621_put_to_dimm(host, test_parttern2, 0x40, 40);
|
2005-04-16 22:20:36 +00:00
|
|
|
|
2007-10-26 04:03:37 +00:00
|
|
|
pdc20621_put_to_dimm(host, test_parttern1, 0x10040, 40);
|
|
|
|
pdc20621_get_from_dimm(host, test_parttern2, 0x40, 40);
|
2021-12-21 07:21:00 +00:00
|
|
|
dev_info(host->dev, "DIMM test pattern 1: %x, %x, %s\n", test_parttern2[0],
|
2005-04-16 22:20:36 +00:00
|
|
|
test_parttern2[1], &(test_parttern2[2]));
|
2007-10-26 04:03:37 +00:00
|
|
|
pdc20621_get_from_dimm(host, test_parttern2, 0x10040,
|
2005-04-16 22:20:36 +00:00
|
|
|
40);
|
2021-12-21 07:21:00 +00:00
|
|
|
dev_info(host->dev, "DIMM test pattern 2: %x, %x, %s\n",
|
|
|
|
test_parttern2[0],
|
|
|
|
test_parttern2[1], &(test_parttern2[2]));
|
2005-04-16 22:20:36 +00:00
|
|
|
|
2007-10-26 04:03:37 +00:00
|
|
|
pdc20621_put_to_dimm(host, test_parttern1, 0x40, 40);
|
|
|
|
pdc20621_get_from_dimm(host, test_parttern2, 0x40, 40);
|
2021-12-21 07:21:00 +00:00
|
|
|
dev_info(host->dev, "DIMM test pattern 3: %x, %x, %s\n",
|
|
|
|
test_parttern2[0],
|
|
|
|
test_parttern2[1], &(test_parttern2[2]));
|
2005-04-16 22:20:36 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
/* ECC initiliazation. */
|
|
|
|
|
2015-08-03 19:18:13 +00:00
|
|
|
if (!pdc20621_i2c_read(host, PDC_DIMM0_SPD_DEV_ADDRESS,
|
|
|
|
PDC_DIMM_SPD_TYPE, &spd0)) {
|
2021-12-21 07:20:59 +00:00
|
|
|
dev_err(host->dev,
|
|
|
|
"Failed in i2c read: device=%#x, subaddr=%#x\n",
|
2015-08-03 19:18:13 +00:00
|
|
|
PDC_DIMM0_SPD_DEV_ADDRESS, PDC_DIMM_SPD_TYPE);
|
|
|
|
return 1;
|
|
|
|
}
|
2005-04-16 22:20:36 +00:00
|
|
|
if (spd0 == 0x02) {
|
2009-04-14 20:00:54 +00:00
|
|
|
void *buf;
|
2021-12-21 07:20:59 +00:00
|
|
|
dev_dbg(host->dev, "Start ECC initialization\n");
|
2005-04-16 22:20:36 +00:00
|
|
|
addr = 0;
|
|
|
|
length = size * 1024 * 1024;
|
2009-04-14 20:00:54 +00:00
|
|
|
buf = kzalloc(ECC_ERASE_BUF_SZ, GFP_KERNEL);
|
2015-12-29 21:21:15 +00:00
|
|
|
if (!buf)
|
|
|
|
return 1;
|
2005-04-16 22:20:36 +00:00
|
|
|
while (addr < length) {
|
2009-04-14 20:00:54 +00:00
|
|
|
pdc20621_put_to_dimm(host, buf, addr,
|
|
|
|
ECC_ERASE_BUF_SZ);
|
|
|
|
addr += ECC_ERASE_BUF_SZ;
|
2005-04-16 22:20:36 +00:00
|
|
|
}
|
2009-04-14 20:00:54 +00:00
|
|
|
kfree(buf);
|
2021-12-21 07:20:59 +00:00
|
|
|
dev_dbg(host->dev, "Finish ECC initialization\n");
|
2005-04-16 22:20:36 +00:00
|
|
|
}
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
|
libata: convert the remaining SATA drivers to new init model
Convert ahci, sata_sil, sata_sil24, sata_svw, sata_qstor, sata_mv,
sata_sx4, sata_vsc and sata_inic162x to new init model.
Now that host and ap are available during intialization, functions are
converted to take either host or ap instead of low level parameters
which were inevitable for functions shared between init and other
paths. This simplifies code quite a bit.
* init_one()'s now follow more consistent init order
* ahci_setup_port() and ahci_host_init() collapsed into
ahci_init_one() for init order consistency
* sata_vsc uses port_info instead of setting fields manually
* in sata_svw, k2_board_info converted to port_info (info is now in
port flags). port number is honored now.
Tested on ICH7/8 AHCI, jmb360, sil3112, 3114, 3124 and 3132.
Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-17 14:44:08 +00:00
|
|
|
static void pdc_20621_init(struct ata_host *host)
|
2005-04-16 22:20:36 +00:00
|
|
|
{
|
|
|
|
u32 tmp;
|
libata: convert the remaining SATA drivers to new init model
Convert ahci, sata_sil, sata_sil24, sata_svw, sata_qstor, sata_mv,
sata_sx4, sata_vsc and sata_inic162x to new init model.
Now that host and ap are available during intialization, functions are
converted to take either host or ap instead of low level parameters
which were inevitable for functions shared between init and other
paths. This simplifies code quite a bit.
* init_one()'s now follow more consistent init order
* ahci_setup_port() and ahci_host_init() collapsed into
ahci_init_one() for init order consistency
* sata_vsc uses port_info instead of setting fields manually
* in sata_svw, k2_board_info converted to port_info (info is now in
port flags). port number is honored now.
Tested on ICH7/8 AHCI, jmb360, sil3112, 3114, 3124 and 3132.
Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-17 14:44:08 +00:00
|
|
|
void __iomem *mmio = host->iomap[PDC_MMIO_BAR];
|
2005-04-16 22:20:36 +00:00
|
|
|
|
|
|
|
/* hard-code chip #0 */
|
|
|
|
mmio += PDC_CHIP0_OFS;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Select page 0x40 for our 32k DIMM window
|
|
|
|
*/
|
|
|
|
tmp = readl(mmio + PDC_20621_DIMM_WINDOW) & 0xffff0000;
|
|
|
|
tmp |= PDC_PAGE_WINDOW; /* page 40h; arbitrarily selected */
|
|
|
|
writel(tmp, mmio + PDC_20621_DIMM_WINDOW);
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Reset Host DMA
|
|
|
|
*/
|
|
|
|
tmp = readl(mmio + PDC_HDMA_CTLSTAT);
|
|
|
|
tmp |= PDC_RESET;
|
|
|
|
writel(tmp, mmio + PDC_HDMA_CTLSTAT);
|
|
|
|
readl(mmio + PDC_HDMA_CTLSTAT); /* flush */
|
|
|
|
|
|
|
|
udelay(10);
|
|
|
|
|
|
|
|
tmp = readl(mmio + PDC_HDMA_CTLSTAT);
|
|
|
|
tmp &= ~PDC_RESET;
|
|
|
|
writel(tmp, mmio + PDC_HDMA_CTLSTAT);
|
|
|
|
readl(mmio + PDC_HDMA_CTLSTAT); /* flush */
|
|
|
|
}
|
|
|
|
|
2007-10-26 04:03:37 +00:00
|
|
|
static int pdc_sata_init_one(struct pci_dev *pdev,
|
|
|
|
const struct pci_device_id *ent)
|
2005-04-16 22:20:36 +00:00
|
|
|
{
|
libata: convert the remaining SATA drivers to new init model
Convert ahci, sata_sil, sata_sil24, sata_svw, sata_qstor, sata_mv,
sata_sx4, sata_vsc and sata_inic162x to new init model.
Now that host and ap are available during intialization, functions are
converted to take either host or ap instead of low level parameters
which were inevitable for functions shared between init and other
paths. This simplifies code quite a bit.
* init_one()'s now follow more consistent init order
* ahci_setup_port() and ahci_host_init() collapsed into
ahci_init_one() for init order consistency
* sata_vsc uses port_info instead of setting fields manually
* in sata_svw, k2_board_info converted to port_info (info is now in
port flags). port number is honored now.
Tested on ICH7/8 AHCI, jmb360, sil3112, 3114, 3124 and 3132.
Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-17 14:44:08 +00:00
|
|
|
const struct ata_port_info *ppi[] =
|
|
|
|
{ &pdc_port_info[ent->driver_data], NULL };
|
|
|
|
struct ata_host *host;
|
2007-01-20 07:00:28 +00:00
|
|
|
struct pdc_host_priv *hpriv;
|
2007-08-18 04:14:55 +00:00
|
|
|
int i, rc;
|
2005-04-16 22:20:36 +00:00
|
|
|
|
2011-04-15 22:52:00 +00:00
|
|
|
ata_print_version_once(&pdev->dev, DRV_VERSION);
|
2005-04-16 22:20:36 +00:00
|
|
|
|
libata: convert the remaining SATA drivers to new init model
Convert ahci, sata_sil, sata_sil24, sata_svw, sata_qstor, sata_mv,
sata_sx4, sata_vsc and sata_inic162x to new init model.
Now that host and ap are available during intialization, functions are
converted to take either host or ap instead of low level parameters
which were inevitable for functions shared between init and other
paths. This simplifies code quite a bit.
* init_one()'s now follow more consistent init order
* ahci_setup_port() and ahci_host_init() collapsed into
ahci_init_one() for init order consistency
* sata_vsc uses port_info instead of setting fields manually
* in sata_svw, k2_board_info converted to port_info (info is now in
port flags). port number is honored now.
Tested on ICH7/8 AHCI, jmb360, sil3112, 3114, 3124 and 3132.
Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-17 14:44:08 +00:00
|
|
|
/* allocate host */
|
|
|
|
host = ata_host_alloc_pinfo(&pdev->dev, ppi, 4);
|
|
|
|
hpriv = devm_kzalloc(&pdev->dev, sizeof(*hpriv), GFP_KERNEL);
|
|
|
|
if (!host || !hpriv)
|
|
|
|
return -ENOMEM;
|
|
|
|
|
|
|
|
host->private_data = hpriv;
|
|
|
|
|
|
|
|
/* acquire resources and fill host */
|
2007-01-20 07:00:28 +00:00
|
|
|
rc = pcim_enable_device(pdev);
|
2005-04-16 22:20:36 +00:00
|
|
|
if (rc)
|
|
|
|
return rc;
|
|
|
|
|
2007-02-01 06:06:36 +00:00
|
|
|
rc = pcim_iomap_regions(pdev, (1 << PDC_MMIO_BAR) | (1 << PDC_DIMM_BAR),
|
|
|
|
DRV_NAME);
|
|
|
|
if (rc == -EBUSY)
|
2007-01-20 07:00:28 +00:00
|
|
|
pcim_pin_device(pdev);
|
2007-02-01 06:06:36 +00:00
|
|
|
if (rc)
|
2007-01-20 07:00:28 +00:00
|
|
|
return rc;
|
libata: convert the remaining SATA drivers to new init model
Convert ahci, sata_sil, sata_sil24, sata_svw, sata_qstor, sata_mv,
sata_sx4, sata_vsc and sata_inic162x to new init model.
Now that host and ap are available during intialization, functions are
converted to take either host or ap instead of low level parameters
which were inevitable for functions shared between init and other
paths. This simplifies code quite a bit.
* init_one()'s now follow more consistent init order
* ahci_setup_port() and ahci_host_init() collapsed into
ahci_init_one() for init order consistency
* sata_vsc uses port_info instead of setting fields manually
* in sata_svw, k2_board_info converted to port_info (info is now in
port flags). port number is honored now.
Tested on ICH7/8 AHCI, jmb360, sil3112, 3114, 3124 and 3132.
Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-17 14:44:08 +00:00
|
|
|
host->iomap = pcim_iomap_table(pdev);
|
|
|
|
|
2007-08-18 04:14:55 +00:00
|
|
|
for (i = 0; i < 4; i++) {
|
|
|
|
struct ata_port *ap = host->ports[i];
|
|
|
|
void __iomem *base = host->iomap[PDC_MMIO_BAR] + PDC_CHIP0_OFS;
|
|
|
|
unsigned int offset = 0x200 + i * 0x80;
|
|
|
|
|
|
|
|
pdc_sata_setup_port(&ap->ioaddr, base + offset);
|
|
|
|
|
|
|
|
ata_port_pbar_desc(ap, PDC_MMIO_BAR, -1, "mmio");
|
|
|
|
ata_port_pbar_desc(ap, PDC_DIMM_BAR, -1, "dimm");
|
|
|
|
ata_port_pbar_desc(ap, PDC_MMIO_BAR, offset, "port");
|
|
|
|
}
|
2005-04-16 22:20:36 +00:00
|
|
|
|
libata: convert the remaining SATA drivers to new init model
Convert ahci, sata_sil, sata_sil24, sata_svw, sata_qstor, sata_mv,
sata_sx4, sata_vsc and sata_inic162x to new init model.
Now that host and ap are available during intialization, functions are
converted to take either host or ap instead of low level parameters
which were inevitable for functions shared between init and other
paths. This simplifies code quite a bit.
* init_one()'s now follow more consistent init order
* ahci_setup_port() and ahci_host_init() collapsed into
ahci_init_one() for init order consistency
* sata_vsc uses port_info instead of setting fields manually
* in sata_svw, k2_board_info converted to port_info (info is now in
port flags). port number is honored now.
Tested on ICH7/8 AHCI, jmb360, sil3112, 3114, 3124 and 3132.
Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-17 14:44:08 +00:00
|
|
|
/* configure and activate */
|
2019-08-26 10:57:25 +00:00
|
|
|
rc = dma_set_mask_and_coherent(&pdev->dev, ATA_DMA_MASK);
|
2005-04-16 22:20:36 +00:00
|
|
|
if (rc)
|
2007-01-20 07:00:28 +00:00
|
|
|
return rc;
|
2005-04-16 22:20:36 +00:00
|
|
|
|
libata: convert the remaining SATA drivers to new init model
Convert ahci, sata_sil, sata_sil24, sata_svw, sata_qstor, sata_mv,
sata_sx4, sata_vsc and sata_inic162x to new init model.
Now that host and ap are available during intialization, functions are
converted to take either host or ap instead of low level parameters
which were inevitable for functions shared between init and other
paths. This simplifies code quite a bit.
* init_one()'s now follow more consistent init order
* ahci_setup_port() and ahci_host_init() collapsed into
ahci_init_one() for init order consistency
* sata_vsc uses port_info instead of setting fields manually
* in sata_svw, k2_board_info converted to port_info (info is now in
port flags). port number is honored now.
Tested on ICH7/8 AHCI, jmb360, sil3112, 3114, 3124 and 3132.
Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-17 14:44:08 +00:00
|
|
|
if (pdc20621_dimm_init(host))
|
2007-01-20 07:00:28 +00:00
|
|
|
return -ENOMEM;
|
libata: convert the remaining SATA drivers to new init model
Convert ahci, sata_sil, sata_sil24, sata_svw, sata_qstor, sata_mv,
sata_sx4, sata_vsc and sata_inic162x to new init model.
Now that host and ap are available during intialization, functions are
converted to take either host or ap instead of low level parameters
which were inevitable for functions shared between init and other
paths. This simplifies code quite a bit.
* init_one()'s now follow more consistent init order
* ahci_setup_port() and ahci_host_init() collapsed into
ahci_init_one() for init order consistency
* sata_vsc uses port_info instead of setting fields manually
* in sata_svw, k2_board_info converted to port_info (info is now in
port flags). port number is honored now.
Tested on ICH7/8 AHCI, jmb360, sil3112, 3114, 3124 and 3132.
Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-17 14:44:08 +00:00
|
|
|
pdc_20621_init(host);
|
2005-04-16 22:20:36 +00:00
|
|
|
|
|
|
|
pci_set_master(pdev);
|
libata: convert the remaining SATA drivers to new init model
Convert ahci, sata_sil, sata_sil24, sata_svw, sata_qstor, sata_mv,
sata_sx4, sata_vsc and sata_inic162x to new init model.
Now that host and ap are available during intialization, functions are
converted to take either host or ap instead of low level parameters
which were inevitable for functions shared between init and other
paths. This simplifies code quite a bit.
* init_one()'s now follow more consistent init order
* ahci_setup_port() and ahci_host_init() collapsed into
ahci_init_one() for init order consistency
* sata_vsc uses port_info instead of setting fields manually
* in sata_svw, k2_board_info converted to port_info (info is now in
port flags). port number is honored now.
Tested on ICH7/8 AHCI, jmb360, sil3112, 3114, 3124 and 3132.
Signed-off-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-04-17 14:44:08 +00:00
|
|
|
return ata_host_activate(host, pdev->irq, pdc20621_interrupt,
|
|
|
|
IRQF_SHARED, &pdc_sata_sht);
|
2005-04-16 22:20:36 +00:00
|
|
|
}
|
|
|
|
|
2012-04-19 05:43:05 +00:00
|
|
|
module_pci_driver(pdc_sata_pci_driver);
|
2005-04-16 22:20:36 +00:00
|
|
|
|
|
|
|
MODULE_AUTHOR("Jeff Garzik");
|
|
|
|
MODULE_DESCRIPTION("Promise SATA low-level driver");
|
|
|
|
MODULE_LICENSE("GPL");
|
|
|
|
MODULE_DEVICE_TABLE(pci, pdc_sata_pci_tbl);
|
|
|
|
MODULE_VERSION(DRV_VERSION);
|